From 9764f3f9c3700620f9f8a1f9af57f58758e835da Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 10 Nov 2008 18:56:59 +0100 Subject: ath5k: name pci driver "ath5k" too Call the ath5k pci driver struct "ath5k" too to be less confusing in sysfs. Signed-off-by: Johannes Berg Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 34cd1a4a297f..7fdb59c813ca 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -200,7 +200,7 @@ static int ath5k_pci_resume(struct pci_dev *pdev); #endif /* CONFIG_PM */ static struct pci_driver ath5k_pci_driver = { - .name = "ath5k_pci", + .name = KBUILD_MODNAME, .id_table = ath5k_pci_id_table, .probe = ath5k_pci_probe, .remove = __devexit_p(ath5k_pci_remove), -- cgit v1.2.2 From c9c3b1a5deac4297503145840fffcd122b253db5 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 10 Nov 2008 19:41:40 +0100 Subject: rt2x00: Cleanup indirect register access All code which accessed indirect registers was similar in respect to the for-loop, the given timeout, etc. Move it into a seperate function, which for PCI drivers can be moved into rt2x00pci. This allows us to cleanup the cleanup the code further by removing the goto statementsand making the codepath look a bit nicer. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2400pci.c | 125 +++++++++---------------- drivers/net/wireless/rt2x00/rt2500pci.c | 125 +++++++++---------------- drivers/net/wireless/rt2x00/rt2500usb.c | 140 ++++++++++++--------------- drivers/net/wireless/rt2x00/rt2x00pci.c | 25 +++++ drivers/net/wireless/rt2x00/rt2x00pci.h | 18 ++++ drivers/net/wireless/rt2x00/rt61pci.c | 161 ++++++++++++-------------------- drivers/net/wireless/rt2x00/rt73usb.c | 147 +++++++++++++---------------- 7 files changed, 310 insertions(+), 431 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 78fca1bcc544..6a977679124d 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -49,20 +49,10 @@ * the access attempt is considered to have failed, * and we will print an error. */ -static u32 rt2400pci_bbp_check(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, BBPCSR, ®); - if (!rt2x00_get_field32(reg, BBPCSR_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg)) static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) @@ -72,31 +62,20 @@ static void rt2400pci_bbp_write(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. */ - reg = rt2400pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) - goto exit_fail; - - /* - * Write the data into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_VALUE, value); - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); - - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); - - mutex_unlock(&rt2x00dev->csr_mutex); - - return; + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBPCSR_VALUE, value); + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); + + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); + } -exit_fail: mutex_unlock(&rt2x00dev->csr_mutex); - - ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n"); } static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -107,74 +86,54 @@ static void rt2400pci_bbp_read(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. */ - reg = rt2400pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) - goto exit_fail; + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); - /* - * Write the request into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); - - /* - * Wait until the BBP becomes ready. - */ - reg = rt2400pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) - goto exit_fail; + WAIT_FOR_BBP(rt2x00dev, ®); + } *value = rt2x00_get_field32(reg, BBPCSR_VALUE); mutex_unlock(&rt2x00dev->csr_mutex); - - return; - -exit_fail: - mutex_unlock(&rt2x00dev->csr_mutex); - - ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); - *value = 0xff; } static void rt2400pci_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { u32 reg; - unsigned int i; if (!word) return; mutex_lock(&rt2x00dev->csr_mutex); - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, RFCSR, ®); - if (!rt2x00_get_field32(reg, RFCSR_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RFCSR_VALUE, value); + rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); + rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); + rt2x00_set_field32(®, RFCSR_BUSY, 1); + + rt2x00pci_register_write(rt2x00dev, RFCSR, reg); + rt2x00_rf_write(rt2x00dev, word, value); } - mutex_unlock(&rt2x00dev->csr_mutex); - ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field32(®, RFCSR_VALUE, value); - rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); - rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); - rt2x00_set_field32(®, RFCSR_BUSY, 1); - - rt2x00pci_register_write(rt2x00dev, RFCSR, reg); - rt2x00_rf_write(rt2x00dev, word, value); - mutex_unlock(&rt2x00dev->csr_mutex); } diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 972b5a5c3864..d3bc218ec85c 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -49,20 +49,10 @@ * the access attempt is considered to have failed, * and we will print an error. */ -static u32 rt2500pci_bbp_check(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, BBPCSR, ®); - if (!rt2x00_get_field32(reg, BBPCSR_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg)) static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) @@ -72,31 +62,20 @@ static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. */ - reg = rt2500pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) - goto exit_fail; - - /* - * Write the data into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_VALUE, value); - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); - - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); - - mutex_unlock(&rt2x00dev->csr_mutex); - - return; + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBPCSR_VALUE, value); + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); + + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); + } -exit_fail: mutex_unlock(&rt2x00dev->csr_mutex); - - ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n"); } static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -107,74 +86,54 @@ static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. */ - reg = rt2500pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) - goto exit_fail; + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, BBPCSR_REGNUM, word); + rt2x00_set_field32(®, BBPCSR_BUSY, 1); + rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); - /* - * Write the request into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); + rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); - - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) - goto exit_fail; + WAIT_FOR_BBP(rt2x00dev, ®); + } *value = rt2x00_get_field32(reg, BBPCSR_VALUE); mutex_unlock(&rt2x00dev->csr_mutex); - - return; - -exit_fail: - mutex_unlock(&rt2x00dev->csr_mutex); - - ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); - *value = 0xff; } static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { u32 reg; - unsigned int i; if (!word) return; mutex_lock(&rt2x00dev->csr_mutex); - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, RFCSR, ®); - if (!rt2x00_get_field32(reg, RFCSR_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, RFCSR_VALUE, value); + rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); + rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); + rt2x00_set_field32(®, RFCSR_BUSY, 1); + + rt2x00pci_register_write(rt2x00dev, RFCSR, reg); + rt2x00_rf_write(rt2x00dev, word, value); } - mutex_unlock(&rt2x00dev->csr_mutex); - ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field32(®, RFCSR_VALUE, value); - rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); - rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); - rt2x00_set_field32(®, RFCSR_BUSY, 1); - - rt2x00pci_register_write(rt2x00dev, RFCSR, reg); - rt2x00_rf_write(rt2x00dev, word, value); - mutex_unlock(&rt2x00dev->csr_mutex); } diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index e6bae4ae4c47..40eb64358821 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -57,7 +57,7 @@ static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev, __le16 reg; rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(u16), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); *value = le16_to_cpu(reg); } @@ -68,7 +68,7 @@ static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev, __le16 reg; rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ, USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(u16), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); *value = le16_to_cpu(reg); } @@ -89,7 +89,7 @@ static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev, __le16 reg = cpu_to_le16(value); rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(u16), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); } static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev, @@ -99,7 +99,7 @@ static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev, __le16 reg = cpu_to_le16(value); rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(u16), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); } static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, @@ -112,21 +112,32 @@ static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, REGISTER_TIMEOUT16(length)); } -static u16 rt2500usb_bbp_check(struct rt2x00_dev *rt2x00dev) +static int rt2500usb_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + struct rt2x00_field16 field, + u16 *reg) { - u16 reg; unsigned int i; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2500usb_register_read_lock(rt2x00dev, PHY_CSR8, ®); - if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY)) - break; + rt2500usb_register_read_lock(rt2x00dev, offset, reg); + if (!rt2x00_get_field16(*reg, field)) + return 1; udelay(REGISTER_BUSY_DELAY); } - return reg; + ERROR(rt2x00dev, "Indirect register access failed: " + "offset=0x%.08x, value=0x%.08x\n", offset, *reg); + *reg = ~0; + + return 0; } +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2500usb_regbusy_read((__dev), PHY_CSR8, PHY_CSR8_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2500usb_regbusy_read((__dev), PHY_CSR10, PHY_CSR10_RF_BUSY, (__reg)) + static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) { @@ -135,30 +146,19 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. - */ - reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) - goto exit_fail; - - /* - * Write the data into the BBP. + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. */ - reg = 0; - rt2x00_set_field16(®, PHY_CSR7_DATA, value); - rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); - rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 0); - - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); - - mutex_unlock(&rt2x00dev->csr_mutex); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field16(®, PHY_CSR7_DATA, value); + rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); + rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 0); - return; + rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); + } -exit_fail: mutex_unlock(&rt2x00dev->csr_mutex); - - ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n"); } static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -169,77 +169,57 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. - */ - reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) - goto exit_fail; - - /* - * Write the request into the BBP. + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. */ - reg = 0; - rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); - rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 1); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); + rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 1); - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); + rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) - goto exit_fail; + if (WAIT_FOR_BBP(rt2x00dev, ®)) + rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, ®); + } - rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, ®); *value = rt2x00_get_field16(reg, PHY_CSR7_DATA); mutex_unlock(&rt2x00dev->csr_mutex); - - return; - -exit_fail: - mutex_unlock(&rt2x00dev->csr_mutex); - - ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); - *value = 0xff; } static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { u16 reg; - unsigned int i; if (!word) return; mutex_lock(&rt2x00dev->csr_mutex); - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2500usb_register_read_lock(rt2x00dev, PHY_CSR10, ®); - if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } - - mutex_unlock(&rt2x00dev->csr_mutex); - ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field16(®, PHY_CSR9_RF_VALUE, value); - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg); + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field16(®, PHY_CSR9_RF_VALUE, value); + rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg); - reg = 0; - rt2x00_set_field16(®, PHY_CSR10_RF_VALUE, value >> 16); - rt2x00_set_field16(®, PHY_CSR10_RF_NUMBER_OF_BITS, 20); - rt2x00_set_field16(®, PHY_CSR10_RF_IF_SELECT, 0); - rt2x00_set_field16(®, PHY_CSR10_RF_BUSY, 1); + reg = 0; + rt2x00_set_field16(®, PHY_CSR10_RF_VALUE, value >> 16); + rt2x00_set_field16(®, PHY_CSR10_RF_NUMBER_OF_BITS, 20); + rt2x00_set_field16(®, PHY_CSR10_RF_IF_SELECT, 0); + rt2x00_set_field16(®, PHY_CSR10_RF_BUSY, 1); - rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg); - rt2x00_rf_write(rt2x00dev, word, value); + rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } mutex_unlock(&rt2x00dev->csr_mutex); } diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index e33bd0f150c5..d52b22b82d1f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -31,6 +31,31 @@ #include "rt2x00.h" #include "rt2x00pci.h" +/* + * Register access. + */ +int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, + u32 *reg) +{ + unsigned int i; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00pci_register_read(rt2x00dev, offset, reg); + if (!rt2x00_get_field32(*reg, field)) + return 1; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "Indirect register access failed: " + "offset=0x%.08x, value=0x%.08x\n", offset, *reg); + *reg = ~0; + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read); + /* * TX data handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index 96a2082a3532..9c0a4d77bc1b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -76,6 +76,24 @@ rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, memcpy_toio(rt2x00dev->csr.base + offset, value, length); } +/** + * rt2x00pci_regbusy_read - Read from register with busy check + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @field: Field to check if register is busy + * @reg: Pointer to where register contents should be stored + * + * This function will read the given register, and checks if the + * register is busy. If it is, it will sleep for a couple of + * microseconds before reading the register again. If the register + * is not read after a certain timeout, this function will return + * FALSE. + */ +int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + const struct rt2x00_field32 field, + u32 *reg); + /** * rt2x00pci_write_tx_data - Initialize data for TX operation * @entry: The entry where the frame is located diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 89ac34fbadf2..d54443c25fe3 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -55,20 +55,13 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); * the access attempt is considered to have failed, * and we will print an error. */ -static u32 rt61pci_bbp_check(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, PHY_CSR3, ®); - if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} +#define WAIT_FOR_BBP(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg)) +#define WAIT_FOR_MCU(__dev, __reg) \ + rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \ + H2M_MAILBOX_CSR_OWNER, (__reg)) static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) @@ -78,30 +71,20 @@ static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. - */ - reg = rt61pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - goto exit_fail; - - /* - * Write the data into the BBP. + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_VALUE, value); - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); - - rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); - mutex_unlock(&rt2x00dev->csr_mutex); + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_VALUE, value); + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); - return; + rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); + } -exit_fail: mutex_unlock(&rt2x00dev->csr_mutex); - - ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); } static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -112,72 +95,53 @@ static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. */ - reg = rt61pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - goto exit_fail; + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); - /* - * Write the request into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); + rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); - rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); - - /* - * Wait until the BBP becomes ready. - */ - reg = rt61pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - goto exit_fail; + WAIT_FOR_BBP(rt2x00dev, ®); + } *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); - mutex_unlock(&rt2x00dev->csr_mutex); - - return; -exit_fail: mutex_unlock(&rt2x00dev->csr_mutex); - - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - *value = 0xff; } static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { u32 reg; - unsigned int i; if (!word) return; mutex_lock(&rt2x00dev->csr_mutex); - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, PHY_CSR4, ®); - if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } - - mutex_unlock(&rt2x00dev->csr_mutex); - ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field32(®, PHY_CSR4_VALUE, value); - rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, 21); - rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); - rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); + /* + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR4_VALUE, value); + rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, 21); + rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); + rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); - rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg); - rt2x00_rf_write(rt2x00dev, word, value); + rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } mutex_unlock(&rt2x00dev->csr_mutex); } @@ -196,32 +160,25 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->csr_mutex); - rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CSR, ®); - - if (rt2x00_get_field32(reg, H2M_MAILBOX_CSR_OWNER)) - goto exit_fail; - - rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); - rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, ®); - rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); - rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); - rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); - - mutex_unlock(&rt2x00dev->csr_mutex); + /* + * Wait until the MCU becomes available, afterwards we + * can safely write the new data into the register. + */ + if (WAIT_FOR_MCU(rt2x00dev, ®)) { + rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); + rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); + rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg); - return; + rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, ®); + rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); + rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); + rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); + } -exit_fail: mutex_unlock(&rt2x00dev->csr_mutex); - ERROR(rt2x00dev, - "mcu request error. Request 0x%02x failed for token 0x%02x.\n", - command, token); } #endif /* CONFIG_RT2X00_LIB_LEDS */ diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index d1a63e0017da..b4ca8488beff 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -63,7 +63,7 @@ static inline void rt73usb_register_read(struct rt2x00_dev *rt2x00dev, __le32 reg; rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(u32), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); *value = le32_to_cpu(reg); } @@ -73,7 +73,7 @@ static inline void rt73usb_register_read_lock(struct rt2x00_dev *rt2x00dev, __le32 reg; rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ, USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(u32), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); *value = le32_to_cpu(reg); } @@ -93,7 +93,7 @@ static inline void rt73usb_register_write(struct rt2x00_dev *rt2x00dev, __le32 reg = cpu_to_le32(value); rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(u32), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); } static inline void rt73usb_register_write_lock(struct rt2x00_dev *rt2x00dev, @@ -102,7 +102,7 @@ static inline void rt73usb_register_write_lock(struct rt2x00_dev *rt2x00dev, __le32 reg = cpu_to_le32(value); rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(u32), REGISTER_TIMEOUT); + ®, sizeof(reg), REGISTER_TIMEOUT); } static inline void rt73usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, @@ -115,21 +115,32 @@ static inline void rt73usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, REGISTER_TIMEOUT32(length)); } -static u32 rt73usb_bbp_check(struct rt2x00_dev *rt2x00dev) +static int rt73usb_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + struct rt2x00_field32 field, + u32 *reg) { - u32 reg; unsigned int i; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt73usb_register_read_lock(rt2x00dev, PHY_CSR3, ®); - if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - break; + rt73usb_register_read_lock(rt2x00dev, offset, reg); + if (!rt2x00_get_field32(*reg, field)) + return 1; udelay(REGISTER_BUSY_DELAY); } - return reg; + ERROR(rt2x00dev, "Indirect register access failed: " + "offset=0x%.08x, value=0x%.08x\n", offset, *reg); + *reg = ~0; + + return 0; } +#define WAIT_FOR_BBP(__dev, __reg) \ + rt73usb_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg)) +#define WAIT_FOR_RF(__dev, __reg) \ + rt73usb_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg)) + static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) { @@ -138,30 +149,20 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. + * Wait until the BBP becomes available, afterwards we + * can safely write the new data into the register. */ - reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - goto exit_fail; - - /* - * Write the data into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_VALUE, value); - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); - - rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); - mutex_unlock(&rt2x00dev->csr_mutex); - - return; + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_VALUE, value); + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); + + rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); + } -exit_fail: mutex_unlock(&rt2x00dev->csr_mutex); - - ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); } static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -172,79 +173,59 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->csr_mutex); /* - * Wait until the BBP becomes ready. + * Wait until the BBP becomes available, afterwards we + * can safely write the read request into the register. + * After the data has been written, we wait until hardware + * returns the correct value, if at any time the register + * doesn't become available in time, reg will be 0xffffffff + * which means we return 0xff to the caller. */ - reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - goto exit_fail; + if (WAIT_FOR_BBP(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); + rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); + rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); - /* - * Write the request into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); + rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); - rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); - - /* - * Wait until the BBP becomes ready. - */ - reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - goto exit_fail; + WAIT_FOR_BBP(rt2x00dev, ®); + } *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); - mutex_unlock(&rt2x00dev->csr_mutex); - - return; -exit_fail: mutex_unlock(&rt2x00dev->csr_mutex); - - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - *value = 0xff; } static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u32 value) { u32 reg; - unsigned int i; if (!word) return; mutex_lock(&rt2x00dev->csr_mutex); - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt73usb_register_read_lock(rt2x00dev, PHY_CSR4, ®); - if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } - - mutex_unlock(&rt2x00dev->csr_mutex); - ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field32(®, PHY_CSR4_VALUE, value); - /* - * RF5225 and RF2527 contain 21 bits per RF register value, - * all others contain 20 bits. + * Wait until the RF becomes available, afterwards we + * can safely write the new data into the register. */ - rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, - 20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF2527))); - rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); - rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); - - rt73usb_register_write_lock(rt2x00dev, PHY_CSR4, reg); - rt2x00_rf_write(rt2x00dev, word, value); + if (WAIT_FOR_RF(rt2x00dev, ®)) { + reg = 0; + rt2x00_set_field32(®, PHY_CSR4_VALUE, value); + /* + * RF5225 and RF2527 contain 21 bits per RF register value, + * all others contain 20 bits. + */ + rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, + 20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) || + rt2x00_rf(&rt2x00dev->chip, RF2527))); + rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); + rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); + + rt73usb_register_write_lock(rt2x00dev, PHY_CSR4, reg); + rt2x00_rf_write(rt2x00dev, word, value); + } mutex_unlock(&rt2x00dev->csr_mutex); } -- cgit v1.2.2 From 0f829b1d6f499447052f98098e41fd6a091eadd0 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 10 Nov 2008 19:42:18 +0100 Subject: rt2x00: Move rt73usb register access wrappers into rt2x00usb rt2500usb and rt73usb have different register word sizes, for that reason the register access wrappers were never moved into rt2x00usb. With rt2800usb on its way, we should favor the 32bit register access and move those wrappers into rt2x00usb. That saves duplicate code, since only rt2500usb will need the special 16bit wrappers. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00usb.c | 22 +++ drivers/net/wireless/rt2x00/rt2x00usb.h | 136 ++++++++++++++ drivers/net/wireless/rt2x00/rt73usb.c | 323 ++++++++++++-------------------- 3 files changed, 280 insertions(+), 201 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index c507b0d9409f..2fbf78ff6b18 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -154,6 +154,28 @@ int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, } EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff); +int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + struct rt2x00_field32 field, + u32 *reg) +{ + unsigned int i; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2x00usb_register_read_lock(rt2x00dev, offset, reg); + if (!rt2x00_get_field32(*reg, field)) + return 1; + udelay(REGISTER_BUSY_DELAY); + } + + ERROR(rt2x00dev, "Indirect register access failed: " + "offset=0x%.08x, value=0x%.08x\n", offset, *reg); + *reg = ~0; + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00usb_regbusy_read); + /* * TX data handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 4104f0e8fa48..2bd4ac855f52 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -231,6 +231,142 @@ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev, REGISTER_TIMEOUT16(length)); } +/** + * rt2x00usb_regbusy_read - Read 32bit register word + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Pointer to where register contents should be stored + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_request_buff(). + */ +static inline void rt2x00usb_register_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 *value) +{ + __le32 reg; + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, + USB_VENDOR_REQUEST_IN, offset, + ®, sizeof(reg), REGISTER_TIMEOUT); + *value = le32_to_cpu(reg); +} + +/** + * rt2x00usb_register_read_lock - Read 32bit register word + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Pointer to where register contents should be stored + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_req_buff_lock(). + */ +static inline void rt2x00usb_register_read_lock(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 *value) +{ + __le32 reg; + rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ, + USB_VENDOR_REQUEST_IN, offset, + ®, sizeof(reg), REGISTER_TIMEOUT); + *value = le32_to_cpu(reg); +} + +/** + * rt2x00usb_register_multiread - Read 32bit register words + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Pointer to where register contents should be stored + * @length: Length of the data + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_request_buff(). + */ +static inline void rt2x00usb_register_multiread(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) +{ + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, + USB_VENDOR_REQUEST_IN, offset, + value, length, + REGISTER_TIMEOUT32(length)); +} + +/** + * rt2x00usb_register_write - Write 32bit register word + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Data which should be written + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_request_buff(). + */ +static inline void rt2x00usb_register_write(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 value) +{ + __le32 reg = cpu_to_le32(value); + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, offset, + ®, sizeof(reg), REGISTER_TIMEOUT); +} + +/** + * rt2x00usb_register_write_lock - Write 32bit register word + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Data which should be written + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_req_buff_lock(). + */ +static inline void rt2x00usb_register_write_lock(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + u32 value) +{ + __le32 reg = cpu_to_le32(value); + rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, offset, + ®, sizeof(reg), REGISTER_TIMEOUT); +} + +/** + * rt2x00usb_register_multiwrite - Write 32bit register words + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @value: Data which should be written + * @length: Length of the data + * + * This function is a simple wrapper for 32bit register access + * through rt2x00usb_vendor_request_buff(). + */ +static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + void *value, const u32 length) +{ + rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, offset, + value, length, + REGISTER_TIMEOUT32(length)); +} + +/** + * rt2x00usb_regbusy_read - Read from register with busy check + * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * @offset: Register offset + * @field: Field to check if register is busy + * @reg: Pointer to where register contents should be stored + * + * This function will read the given register, and checks if the + * register is busy. If it is, it will sleep for a couple of + * microseconds before reading the register again. If the register + * is not read after a certain timeout, this function will return + * FALSE. + */ +int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, + const unsigned int offset, + struct rt2x00_field32 field, + u32 *reg); + /* * Radio handlers */ diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index b4ca8488beff..ee59b4e35cdc 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -46,7 +46,7 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); /* * Register access. * All access to the CSR registers will go through the methods - * rt73usb_register_read and rt73usb_register_write. + * rt2x00usb_register_read and rt2x00usb_register_write. * BBP and RF register require indirect register access, * and use the CSR registers BBPCSR and RFCSR to achieve this. * These indirect registers work with busy bits, @@ -57,89 +57,10 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); * and we will print an error. * The _lock versions must be used if you already hold the csr_mutex */ -static inline void rt73usb_register_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 *value) -{ - __le32 reg; - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(reg), REGISTER_TIMEOUT); - *value = le32_to_cpu(reg); -} - -static inline void rt73usb_register_read_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 *value) -{ - __le32 reg; - rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(reg), REGISTER_TIMEOUT); - *value = le32_to_cpu(reg); -} - -static inline void rt73usb_register_multiread(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) -{ - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - value, length, - REGISTER_TIMEOUT32(length)); -} - -static inline void rt73usb_register_write(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 value) -{ - __le32 reg = cpu_to_le32(value); - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(reg), REGISTER_TIMEOUT); -} - -static inline void rt73usb_register_write_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 value) -{ - __le32 reg = cpu_to_le32(value); - rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(reg), REGISTER_TIMEOUT); -} - -static inline void rt73usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) -{ - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - value, length, - REGISTER_TIMEOUT32(length)); -} - -static int rt73usb_regbusy_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - struct rt2x00_field32 field, - u32 *reg) -{ - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt73usb_register_read_lock(rt2x00dev, offset, reg); - if (!rt2x00_get_field32(*reg, field)) - return 1; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "Indirect register access failed: " - "offset=0x%.08x, value=0x%.08x\n", offset, *reg); - *reg = ~0; - - return 0; -} - #define WAIT_FOR_BBP(__dev, __reg) \ - rt73usb_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg)) + rt2x00usb_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg)) #define WAIT_FOR_RF(__dev, __reg) \ - rt73usb_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg)) + rt2x00usb_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg)) static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) @@ -159,7 +80,7 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); - rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); + rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); } mutex_unlock(&rt2x00dev->csr_mutex); @@ -186,7 +107,7 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); - rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); + rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); WAIT_FOR_BBP(rt2x00dev, ®); } @@ -223,7 +144,7 @@ static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); - rt73usb_register_write_lock(rt2x00dev, PHY_CSR4, reg); + rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR4, reg); rt2x00_rf_write(rt2x00dev, word, value); } @@ -234,8 +155,8 @@ static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev, static const struct rt2x00debug rt73usb_rt2x00debug = { .owner = THIS_MODULE, .csr = { - .read = rt73usb_register_read, - .write = rt73usb_register_write, + .read = rt2x00usb_register_read, + .write = rt2x00usb_register_write, .flags = RT2X00DEBUGFS_OFFSET, .word_base = CSR_REG_BASE, .word_size = sizeof(u32), @@ -314,10 +235,10 @@ static int rt73usb_blink_set(struct led_classdev *led_cdev, container_of(led_cdev, struct rt2x00_led, led_dev); u32 reg; - rt73usb_register_read(led->rt2x00dev, MAC_CSR14, ®); + rt2x00usb_register_read(led->rt2x00dev, MAC_CSR14, ®); rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on); rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off); - rt73usb_register_write(led->rt2x00dev, MAC_CSR14, reg); + rt2x00usb_register_write(led->rt2x00dev, MAC_CSR14, reg); return 0; } @@ -360,7 +281,7 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, */ mask = (0xf << crypto->bssidx); - rt73usb_register_read(rt2x00dev, SEC_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR0, ®); reg &= mask; if (reg && reg == mask) @@ -397,16 +318,16 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, field.bit_offset = (3 * key->hw_key_idx); field.bit_mask = 0x7 << field.bit_offset; - rt73usb_register_read(rt2x00dev, SEC_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR1, ®); rt2x00_set_field32(®, field, crypto->cipher); - rt73usb_register_write(rt2x00dev, SEC_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR1, reg); } else { field.bit_offset = (3 * (key->hw_key_idx - 8)); field.bit_mask = 0x7 << field.bit_offset; - rt73usb_register_read(rt2x00dev, SEC_CSR5, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR5, ®); rt2x00_set_field32(®, field, crypto->cipher); - rt73usb_register_write(rt2x00dev, SEC_CSR5, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR5, reg); } /* @@ -429,12 +350,12 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, */ mask = 1 << key->hw_key_idx; - rt73usb_register_read(rt2x00dev, SEC_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR0, ®); if (crypto->cmd == SET_KEY) reg |= mask; else if (crypto->cmd == DISABLE_KEY) reg &= ~mask; - rt73usb_register_write(rt2x00dev, SEC_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR0, reg); return 0; } @@ -459,10 +380,10 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, * When both registers are full, we drop the key, * otherwise we use the first invalid entry. */ - rt73usb_register_read(rt2x00dev, SEC_CSR2, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR2, ®); if (reg && reg == ~0) { key->hw_key_idx = 32; - rt73usb_register_read(rt2x00dev, SEC_CSR3, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR3, ®); if (reg && reg == ~0) return -ENOSPC; } @@ -490,14 +411,14 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, /* * Send the address and cipher type to the hardware register. * This data fits within the CSR cache size, so we can use - * rt73usb_register_multiwrite() directly. + * rt2x00usb_register_multiwrite() directly. */ memset(&addr_entry, 0, sizeof(addr_entry)); memcpy(&addr_entry, crypto->address, ETH_ALEN); addr_entry.cipher = crypto->cipher; reg = PAIRWISE_TA_ENTRY(key->hw_key_idx); - rt73usb_register_multiwrite(rt2x00dev, reg, + rt2x00usb_register_multiwrite(rt2x00dev, reg, &addr_entry, sizeof(addr_entry)); /* @@ -505,9 +426,9 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, * without this received frames will not be decrypted * by the hardware. */ - rt73usb_register_read(rt2x00dev, SEC_CSR4, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR4, ®); reg |= (1 << crypto->bssidx); - rt73usb_register_write(rt2x00dev, SEC_CSR4, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR4, reg); /* * The driver does not support the IV/EIV generation @@ -530,21 +451,21 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, if (key->hw_key_idx < 32) { mask = 1 << key->hw_key_idx; - rt73usb_register_read(rt2x00dev, SEC_CSR2, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR2, ®); if (crypto->cmd == SET_KEY) reg |= mask; else if (crypto->cmd == DISABLE_KEY) reg &= ~mask; - rt73usb_register_write(rt2x00dev, SEC_CSR2, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR2, reg); } else { mask = 1 << (key->hw_key_idx - 32); - rt73usb_register_read(rt2x00dev, SEC_CSR3, ®); + rt2x00usb_register_read(rt2x00dev, SEC_CSR3, ®); if (crypto->cmd == SET_KEY) reg |= mask; else if (crypto->cmd == DISABLE_KEY) reg &= ~mask; - rt73usb_register_write(rt2x00dev, SEC_CSR3, reg); + rt2x00usb_register_write(rt2x00dev, SEC_CSR3, reg); } return 0; @@ -561,7 +482,7 @@ static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev, * and broadcast frames will always be accepted since * there is no filter for it at this time. */ - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, !(filter_flags & FIF_FCSFAIL)); rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, @@ -579,7 +500,7 @@ static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, !(filter_flags & FIF_CONTROL)); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); } static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, @@ -598,16 +519,16 @@ static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, * bits which (when set to 0) will invalidate the entire beacon. */ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - rt73usb_register_write(rt2x00dev, beacon_base, 0); + rt2x00usb_register_write(rt2x00dev, beacon_base, 0); /* * Enable synchronisation. */ - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync); rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); } if (flags & CONFIG_UPDATE_MAC) { @@ -615,7 +536,7 @@ static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); conf->mac[1] = cpu_to_le32(reg); - rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2, + rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR2, conf->mac, sizeof(conf->mac)); } @@ -624,7 +545,7 @@ static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3); conf->bssid[1] = cpu_to_le32(reg); - rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, + rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR4, conf->bssid, sizeof(conf->bssid)); } } @@ -634,26 +555,26 @@ static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®); rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, !!erp->short_preamble); - rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg); - rt73usb_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates); - rt73usb_register_read(rt2x00dev, MAC_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®); rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time); - rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg); - rt73usb_register_read(rt2x00dev, MAC_CSR8, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR8, ®); rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs); rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs); - rt73usb_register_write(rt2x00dev, MAC_CSR8, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR8, reg); } static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, @@ -799,14 +720,14 @@ static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev, for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]); - rt73usb_register_read(rt2x00dev, PHY_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, PHY_CSR0, ®); rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)); rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)); - rt73usb_register_write(rt2x00dev, PHY_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, PHY_CSR0, reg); if (rt2x00_rf(&rt2x00dev->chip, RF5226) || rt2x00_rf(&rt2x00dev->chip, RF5225)) @@ -896,12 +817,12 @@ static void rt73usb_config_retry_limit(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®); rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, libconf->conf->long_frame_max_tx_count); rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, libconf->conf->short_frame_max_tx_count); - rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg); } static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev, @@ -909,18 +830,18 @@ static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®); rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, libconf->conf->beacon_int * 16); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); } static void rt73usb_config(struct rt2x00_dev *rt2x00dev, @@ -953,13 +874,13 @@ static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev, /* * Update FCS error count from register. */ - rt73usb_register_read(rt2x00dev, STA_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, STA_CSR0, ®); qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR); /* * Update False CCA count from register. */ - rt73usb_register_read(rt2x00dev, STA_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, STA_CSR1, ®); qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); } @@ -1119,7 +1040,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, * Wait for stable hardware. */ for (i = 0; i < 100; i++) { - rt73usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); if (reg) break; msleep(1); @@ -1161,13 +1082,13 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) { u32 reg; - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1); rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR1, ®); rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */ rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1); rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */ @@ -1176,12 +1097,12 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1); rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */ rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR1, reg); /* * CCK TXD BBP registers */ - rt73usb_register_read(rt2x00dev, TXRX_CSR2, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR2, ®); rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13); rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1); rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12); @@ -1190,77 +1111,77 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1); rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10); rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR2, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR2, reg); /* * OFDM TXD BBP registers */ - rt73usb_register_read(rt2x00dev, TXRX_CSR3, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR3, ®); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5); rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR3, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR3, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR7, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR7, ®); rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59); rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53); rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49); rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46); - rt73usb_register_write(rt2x00dev, TXRX_CSR7, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR7, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR8, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR8, ®); rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44); rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42); rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42); rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); - rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR8, reg); - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0); rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0); rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); - rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); - rt73usb_register_read(rt2x00dev, MAC_CSR6, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR6, ®); rt2x00_set_field32(®, MAC_CSR6_MAX_FRAME_UNIT, 0xfff); - rt73usb_register_write(rt2x00dev, MAC_CSR6, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR6, reg); - rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718); + rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718); if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) return -EBUSY; - rt73usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00); + rt2x00usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00); /* * Invalidate all Shared Keys (SEC_CSR0), * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5) */ - rt73usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000); - rt73usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000); - rt73usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000); + rt2x00usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000); + rt2x00usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000); + rt2x00usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000); reg = 0x000023b0; if (rt2x00_rf(&rt2x00dev->chip, RF5225) || rt2x00_rf(&rt2x00dev->chip, RF2527)) rt2x00_set_field32(®, PHY_CSR1_RF_RPI, 1); - rt73usb_register_write(rt2x00dev, PHY_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, PHY_CSR1, reg); - rt73usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06); - rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606); - rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408); + rt2x00usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06); + rt2x00usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606); + rt2x00usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408); - rt73usb_register_read(rt2x00dev, MAC_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®); rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); - rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg); /* * Clear all beacons @@ -1268,36 +1189,36 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) * the first byte since that byte contains the VALID and OWNER * bits which (when set to 0) will invalidate the entire beacon. */ - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); /* * We must clear the error counters. * These registers are cleared on read, * so we may pass a useless variable to store the value. */ - rt73usb_register_read(rt2x00dev, STA_CSR0, ®); - rt73usb_register_read(rt2x00dev, STA_CSR1, ®); - rt73usb_register_read(rt2x00dev, STA_CSR2, ®); + rt2x00usb_register_read(rt2x00dev, STA_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, STA_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, STA_CSR2, ®); /* * Reset MAC and BBP registers. */ - rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®); rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); - rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg); - rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®); rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); - rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg); - rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®); rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); - rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg); return 0; } @@ -1375,11 +1296,11 @@ static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev, { u32 reg; - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, (state == STATE_RADIO_RX_OFF) || (state == STATE_RADIO_RX_OFF_LINK)); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg); } static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev) @@ -1396,12 +1317,12 @@ static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev) static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev) { - rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818); + rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818); /* * Disable synchronisation. */ - rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, 0); rt2x00usb_disable_radio(rt2x00dev); } @@ -1414,10 +1335,10 @@ static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) put_to_sleep = (state != STATE_AWAKE); - rt73usb_register_read(rt2x00dev, MAC_CSR12, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR12, ®); rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep); rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep); - rt73usb_register_write(rt2x00dev, MAC_CSR12, reg); + rt2x00usb_register_write(rt2x00dev, MAC_CSR12, reg); /* * Device is not guaranteed to be in the requested state yet. @@ -1425,7 +1346,7 @@ static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) * device has entered the correct state. */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt73usb_register_read(rt2x00dev, MAC_CSR12, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR12, ®); state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); if (state == !put_to_sleep) return 0; @@ -1565,11 +1486,11 @@ static void rt73usb_write_beacon(struct queue_entry *entry) * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. */ - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); /* * Write entire beacon with descriptor to register. @@ -1616,14 +1537,14 @@ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, * For Wi-Fi faily generated beacons between participating stations. * Set TBTT phase adaptive adjustment step to 8us (default 16us) */ - rt73usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®); if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg); } } @@ -1862,7 +1783,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) * Identify RF chipset. */ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt73usb_register_read(rt2x00dev, MAC_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2571, value, reg); if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) { @@ -2216,33 +2137,33 @@ static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, field.bit_offset = queue_idx * 16; field.bit_mask = 0xffff << field.bit_offset; - rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); + rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); rt2x00_set_field32(®, field, queue->txop); - rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); + rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); } else if (queue_idx < 4) { field.bit_offset = (queue_idx - 2) * 16; field.bit_mask = 0xffff << field.bit_offset; - rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); + rt2x00usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); rt2x00_set_field32(®, field, queue->txop); - rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); + rt2x00usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); } /* Update WMM registers */ field.bit_offset = queue_idx * 4; field.bit_mask = 0xf << field.bit_offset; - rt73usb_register_read(rt2x00dev, AIFSN_CSR, ®); + rt2x00usb_register_read(rt2x00dev, AIFSN_CSR, ®); rt2x00_set_field32(®, field, queue->aifs); - rt73usb_register_write(rt2x00dev, AIFSN_CSR, reg); + rt2x00usb_register_write(rt2x00dev, AIFSN_CSR, reg); - rt73usb_register_read(rt2x00dev, CWMIN_CSR, ®); + rt2x00usb_register_read(rt2x00dev, CWMIN_CSR, ®); rt2x00_set_field32(®, field, queue->cw_min); - rt73usb_register_write(rt2x00dev, CWMIN_CSR, reg); + rt2x00usb_register_write(rt2x00dev, CWMIN_CSR, reg); - rt73usb_register_read(rt2x00dev, CWMAX_CSR, ®); + rt2x00usb_register_read(rt2x00dev, CWMAX_CSR, ®); rt2x00_set_field32(®, field, queue->cw_max); - rt73usb_register_write(rt2x00dev, CWMAX_CSR, reg); + rt2x00usb_register_write(rt2x00dev, CWMAX_CSR, reg); return 0; } @@ -2260,9 +2181,9 @@ static u64 rt73usb_get_tsf(struct ieee80211_hw *hw) u64 tsf; u32 reg; - rt73usb_register_read(rt2x00dev, TXRX_CSR13, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR13, ®); tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; - rt73usb_register_read(rt2x00dev, TXRX_CSR12, ®); + rt2x00usb_register_read(rt2x00dev, TXRX_CSR12, ®); tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); return tsf; -- cgit v1.2.2 From 0e3de99846489424c2cba952e0a52c269f01009a Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Wed, 12 Nov 2008 00:01:37 +0100 Subject: rt2x00: Fix TX failure path The callback function write_tx_data() can only fail when our ENTRY_OWNER_DEVICE_DATA flag on a queue entry failed to determine the entry was not available and it is in fact still owned by the hardware. This means that if that function fails the queue must be stopped in mac80211. When rt2x00queue_get_queue() returns NULL in the TX path, it means mac80211 has passed us an invalid queue, although this should be impossible, it shouldn't hurt if we send mac80211 a signal to stop the queue either. Both issues can simply be resolved by removing their manual failure handler and making them use the failure path provided in rt2x00mac_tx(). Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00mac.c | 3 +-- drivers/net/wireless/rt2x00/rt2x00queue.c | 14 ++++++-------- 2 files changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 48636b0dd895..4c0395729066 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -132,8 +132,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) ERROR(rt2x00dev, "Attempt to send packet over invalid queue %d.\n" "Please file bug report to %s.\n", qid, DRV_PROJECT); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; + goto exit_fail; } /* diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index d7752dbd2023..b8de9d2750e4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -386,7 +386,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) u8 rate_idx, rate_flags; if (unlikely(rt2x00queue_full(queue))) - return -EINVAL; + return -ENOBUFS; if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) { ERROR(queue->rt2x00dev, @@ -415,7 +415,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) tx_info = IEEE80211_SKB_CB(skb); rate_idx = tx_info->control.rates[0].idx; rate_flags = tx_info->control.rates[0].flags; - skbdesc = get_skb_frame_desc(entry->skb); + skbdesc = get_skb_frame_desc(skb); memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->entry = entry; skbdesc->tx_rate_idx = rate_idx; @@ -427,20 +427,18 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) * the frame so we can provide it to the driver seperately. */ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && - !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) { + !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) rt2x00crypto_tx_remove_iv(skb, iv_len); - } /* * It could be possible that the queue was corrupted and this - * call failed. Just drop the frame, we cannot rollback and pass - * the frame to mac80211 because the skb->cb has now been tainted. + * call failed. Since we always return NETDEV_TX_OK to mac80211, + * this frame will simply be dropped. */ if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) { clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - dev_kfree_skb_any(entry->skb); entry->skb = NULL; - return 0; + return -EIO; } if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags)) -- cgit v1.2.2 From cee53ddb46eb520079335d0868d0e81c8d311089 Mon Sep 17 00:00:00 2001 From: "Kolekar, Abhijeet" Date: Wed, 12 Nov 2008 13:14:04 -0800 Subject: iwl3945 : Simplify iwl3945_pci_probe Patch aligns iwl3945_pci_probe with iwlwifi's iwl_pci_probe. Added few comments and code simplified to make readable. Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 195 +++++++++++++++++----------- 1 file changed, 117 insertions(+), 78 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 3344841b7662..18d2a2a68959 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -7787,6 +7787,10 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e struct iwl_3945_cfg *cfg = (struct iwl_3945_cfg *)(ent->driver_data); unsigned long flags; + /*********************** + * 1. Allocating HW data + * ********************/ + /* Disabling hardware scan means that mac80211 will perform scans * "the hard way", rather than using device's scan. */ if (iwl3945_param_disable_hw_scan) { @@ -7810,27 +7814,24 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e err = -ENOMEM; goto out; } - SET_IEEE80211_DEV(hw, &pdev->dev); - hw->rate_control_algorithm = "iwl-3945-rs"; - hw->sta_data_size = sizeof(struct iwl3945_sta_priv); + SET_IEEE80211_DEV(hw, &pdev->dev); - IWL_DEBUG_INFO("*** LOAD DRIVER ***\n"); priv = hw->priv; priv->hw = hw; - priv->pci_dev = pdev; priv->cfg = cfg; + IWL_DEBUG_INFO("*** LOAD DRIVER ***\n"); + hw->rate_control_algorithm = "iwl-3945-rs"; + hw->sta_data_size = sizeof(struct iwl3945_sta_priv); + /* Select antenna (may be helpful if only one antenna is connected) */ priv->antenna = (enum iwl3945_antenna)iwl3945_param_antenna; #ifdef CONFIG_IWL3945_DEBUG iwl3945_debug_level = iwl3945_param_debug; atomic_set(&priv->restrict_refcnt, 0); #endif - priv->retry_rate = 1; - - priv->ibss_beacon = NULL; /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | @@ -7844,14 +7845,9 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e /* 4 EDCA QOS priorities */ hw->queues = 4; - spin_lock_init(&priv->lock); - spin_lock_init(&priv->power_data.lock); - spin_lock_init(&priv->sta_lock); - spin_lock_init(&priv->hcmd_lock); - - INIT_LIST_HEAD(&priv->free_frames); - - mutex_init(&priv->mutex); + /*************************** + * 2. Initializing PCI bus + * *************************/ if (pci_enable_device(pdev)) { err = -ENODEV; goto out_ieee80211_free_hw; @@ -7859,14 +7855,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e pci_set_master(pdev); - /* Clear the driver's (not device's) station table */ - iwl3945_clear_stations_table(priv); - - priv->data_retry_limit = -1; - priv->ieee_channels = NULL; - priv->ieee_rates = NULL; - priv->band = IEEE80211_BAND_2GHZ; - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (!err) err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); @@ -7880,10 +7868,9 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e if (err) goto out_pci_disable_device; - /* We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state */ - pci_write_config_byte(pdev, 0x41, 0x00); - + /*********************** + * 3. Read REV Register + * ********************/ priv->hw_base = pci_iomap(pdev, 0, 0); if (!priv->hw_base) { err = -ENODEV; @@ -7894,25 +7881,70 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e (unsigned long long) pci_resource_len(pdev, 0)); IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base); - /* Initialize module parameter values here */ + /* We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_write_config_byte(pdev, 0x41, 0x00); - /* Disable radio (SW RF KILL) via parameter when loading driver */ - if (iwl3945_param_disable) { - set_bit(STATUS_RF_KILL_SW, &priv->status); - IWL_DEBUG_INFO("Radio disabled.\n"); - } + /* nic init */ + iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - priv->iw_mode = NL80211_IFTYPE_STATION; + iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + err = iwl3945_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (err < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); + goto out_remove_sysfs; + } - printk(KERN_INFO DRV_NAME - ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name); + /*********************** + * 4. Read EEPROM + * ********************/ + /* Read the EEPROM */ + err = iwl3945_eeprom_init(priv); + if (err) { + IWL_ERROR("Unable to init EEPROM\n"); + goto out_remove_sysfs; + } + /* MAC Address location in EEPROM same for 3945/4965 */ + get_eeprom_mac(priv, priv->mac_addr); + IWL_DEBUG_INFO("MAC address: %pM\n", priv->mac_addr); + SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); + /*********************** + * 5. Setup HW Constants + * ********************/ /* Device-specific setup */ if (iwl3945_hw_set_hw_setting(priv)) { IWL_ERROR("failed to set hw settings\n"); goto out_iounmap; } + /*********************** + * 6. Setup priv + * ********************/ + priv->retry_rate = 1; + priv->ibss_beacon = NULL; + + spin_lock_init(&priv->lock); + spin_lock_init(&priv->power_data.lock); + spin_lock_init(&priv->sta_lock); + spin_lock_init(&priv->hcmd_lock); + + INIT_LIST_HEAD(&priv->free_frames); + mutex_init(&priv->mutex); + + /* Clear the driver's (not device's) station table */ + iwl3945_clear_stations_table(priv); + + priv->data_retry_limit = -1; + priv->ieee_channels = NULL; + priv->ieee_rates = NULL; + priv->band = IEEE80211_BAND_2GHZ; + + priv->iw_mode = NL80211_IFTYPE_STATION; + if (iwl3945_param_qos_enable) priv->qos_data.qos_enable = 1; @@ -7921,70 +7953,76 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e priv->qos_data.qos_active = 0; priv->qos_data.qos_cap.val = 0; - iwl3945_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6); - iwl3945_setup_deferred_work(priv); - iwl3945_setup_rx_handlers(priv); priv->rates_mask = IWL_RATES_MASK; /* If power management is turned on, default to AC mode */ priv->power_mode = IWL_POWER_AC; priv->user_txpower_limit = IWL_DEFAULT_TX_POWER; - spin_lock_irqsave(&priv->lock, flags); - iwl3945_disable_interrupts(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group); + err = iwl3945_init_channel_map(priv); if (err) { - IWL_ERROR("failed to create sysfs device attributes\n"); + IWL_ERROR("initializing regulatory failed: %d\n", err); goto out_release_irq; } - /* nic init */ - iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - - iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - err = iwl3945_poll_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (err < 0) { - IWL_DEBUG_INFO("Failed to init the card\n"); - goto out_remove_sysfs; - } - /* Read the EEPROM */ - err = iwl3945_eeprom_init(priv); + err = iwl3945_init_geos(priv); if (err) { - IWL_ERROR("Unable to init EEPROM\n"); - goto out_remove_sysfs; + IWL_ERROR("initializing geos failed: %d\n", err); + goto out_free_channel_map; } - /* MAC Address location in EEPROM same for 3945/4965 */ - get_eeprom_mac(priv, priv->mac_addr); - IWL_DEBUG_INFO("MAC address: %pM\n", priv->mac_addr); - SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); - err = iwl3945_init_channel_map(priv); - if (err) { - IWL_ERROR("initializing regulatory failed: %d\n", err); - goto out_remove_sysfs; + printk(KERN_INFO DRV_NAME + ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name); + + /*********************************** + * 7. Initialize Module Parameters + * **********************************/ + + /* Initialize module parameter values here */ + /* Disable radio (SW RF KILL) via parameter when loading driver */ + if (iwl3945_param_disable) { + set_bit(STATUS_RF_KILL_SW, &priv->status); + IWL_DEBUG_INFO("Radio disabled.\n"); } - err = iwl3945_init_geos(priv); + + /*********************** + * 8. Setup Services + * ********************/ + + spin_lock_irqsave(&priv->lock, flags); + iwl3945_disable_interrupts(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group); if (err) { - IWL_ERROR("initializing geos failed: %d\n", err); - goto out_free_channel_map; + IWL_ERROR("failed to create sysfs device attributes\n"); + goto out_free_geos; } + iwl3945_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6); + iwl3945_setup_deferred_work(priv); + iwl3945_setup_rx_handlers(priv); + + /*********************** + * 9. Conclude + * ********************/ + pci_save_state(pdev); + pci_disable_device(pdev); + + /********************************* + * 10. Setup and Register mac80211 + * *******************************/ + err = ieee80211_register_hw(priv->hw); if (err) { IWL_ERROR("Failed to register network device (error %d)\n", err); - goto out_free_geos; + goto out_remove_sysfs; } priv->hw->conf.beacon_int = 100; priv->mac80211_registered = 1; - pci_save_state(pdev); - pci_disable_device(pdev); + err = iwl3945_rfkill_init(priv); if (err) @@ -7993,12 +8031,13 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e return 0; + out_remove_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); out_free_geos: iwl3945_free_geos(priv); out_free_channel_map: iwl3945_free_channel_map(priv); - out_remove_sysfs: - sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); + out_release_irq: destroy_workqueue(priv->workqueue); -- cgit v1.2.2 From 9f58671e8d4f4896acea30020308ce72bf94ec6e Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 12 Nov 2008 13:14:05 -0800 Subject: iwlwifi: consolidate station management code This patch moves code around and group most of the station management code into iwl-sta.c No functional changes (yet) Signed-off-by: Tomas Winkler Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +- drivers/net/wireless/iwlwifi/iwl-5000.c | 2 +- drivers/net/wireless/iwlwifi/iwl-agn.c | 47 ++--------- drivers/net/wireless/iwlwifi/iwl-core.h | 2 - drivers/net/wireless/iwlwifi/iwl-dev.h | 5 -- drivers/net/wireless/iwlwifi/iwl-rx.c | 75 ------------------ drivers/net/wireless/iwlwifi/iwl-sta.c | 134 ++++++++++++++++++++++++++++++-- drivers/net/wireless/iwlwifi/iwl-sta.h | 13 +++- 8 files changed, 148 insertions(+), 132 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index c43cf2f072cd..17f409864eb6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1909,7 +1909,7 @@ static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id, ra_tid = BUILD_RAxTID(sta_id, tid); /* Modify device's station table to Tx this TID */ - iwl_sta_modify_enable_tid_tx(priv, sta_id, tid); + iwl_sta_tx_modify_enable_tid(priv, sta_id, tid); spin_lock_irqsave(&priv->lock, flags); ret = iwl_grab_nic_access(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index ee3613db3132..b6d7e91e8dd1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -969,7 +969,7 @@ static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id, ra_tid = BUILD_RAxTID(sta_id, tid); /* Modify device's station table to Tx this TID */ - iwl_sta_modify_enable_tid_tx(priv, sta_id, tid); + iwl_sta_tx_modify_enable_tid(priv, sta_id, tid); spin_lock_irqsave(&priv->lock, flags); ret = iwl_grab_nic_access(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 8fa4f7a2dc1a..03acad24f677 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3058,49 +3058,11 @@ static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw, struct ieee80211_key_conf *keyconf, const u8 *addr, u32 iv32, u16 *phase1key) { - struct iwl_priv *priv = hw->priv; - u8 sta_id = IWL_INVALID_STATION; - unsigned long flags; - __le16 key_flags = 0; - int i; + struct iwl_priv *priv = hw->priv; IWL_DEBUG_MAC80211("enter\n"); - sta_id = iwl_find_station(priv, addr); - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_MAC80211("leave - %pM not in station map.\n", - addr); - return; - } - - if (iwl_scan_cancel(priv)) { - /* cancel scan failed, just live w/ bad key and rely - briefly on SW decryption */ - return; - } - - key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags &= ~STA_KEY_FLG_INVALID; - - if (sta_id == priv->hw_params.bcast_sta_id) - key_flags |= STA_KEY_MULTICAST_MSK; - - spin_lock_irqsave(&priv->sta_lock, flags); - - priv->stations[sta_id].sta.key.key_flags = key_flags; - priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; - - for (i = 0; i < 5; i++) - priv->stations[sta_id].sta.key.tkip_rx_ttak[i] = - cpu_to_le16(phase1key[i]); - - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - - iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); - - spin_unlock_irqrestore(&priv->sta_lock, flags); + iwl_update_tkip_key(priv, keyconf, addr, iv32, phase1key); IWL_DEBUG_MAC80211("leave\n"); } @@ -3239,10 +3201,10 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw, switch (action) { case IEEE80211_AMPDU_RX_START: IWL_DEBUG_HT("start Rx\n"); - return iwl_rx_agg_start(priv, sta->addr, tid, *ssn); + return iwl_sta_rx_agg_start(priv, sta->addr, tid, *ssn); case IEEE80211_AMPDU_RX_STOP: IWL_DEBUG_HT("stop Rx\n"); - return iwl_rx_agg_stop(priv, sta->addr, tid); + return iwl_sta_rx_agg_stop(priv, sta->addr, tid); case IEEE80211_AMPDU_TX_START: IWL_DEBUG_HT("start Tx\n"); return iwl_tx_agg_start(priv, sta->addr, tid, ssn); @@ -3256,6 +3218,7 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw, } return 0; } + static int iwl_mac_get_tx_stats(struct ieee80211_hw *hw, struct ieee80211_tx_queue_stats *stats) { diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index ff966b8a0c6d..5d4e2e28bdbe 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -206,8 +206,6 @@ int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq); void iwl_rx_replenish(struct iwl_priv *priv); int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq); -int iwl_rx_agg_start(struct iwl_priv *priv, const u8 *addr, int tid, u16 ssn); -int iwl_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid); int iwl_rx_queue_restock(struct iwl_priv *priv); int iwl_rx_queue_space(const struct iwl_rx_queue *q); void iwl_rx_allocate(struct iwl_priv *priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index bd3df55e4953..0e97d6a13225 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -574,11 +574,6 @@ struct iwl_hw_params { * iwl4965_mac_ <-- mac80211 callback * ****************************************************************************/ -struct iwl_addsta_cmd; -extern int iwl_send_add_sta(struct iwl_priv *priv, - struct iwl_addsta_cmd *sta, u8 flags); -extern u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, - int is_ap, u8 flags, struct ieee80211_sta_ht_cap *ht_info); extern void iwl_update_chain_flags(struct iwl_priv *priv); extern int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src); extern const u8 iwl_bcast_addr[ETH_ALEN]; diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 876afd4cab9e..8d2b73e194da 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -499,49 +499,6 @@ void iwl_rx_missed_beacon_notif(struct iwl_priv *priv, } EXPORT_SYMBOL(iwl_rx_missed_beacon_notif); -int iwl_rx_agg_start(struct iwl_priv *priv, const u8 *addr, int tid, u16 ssn) -{ - unsigned long flags; - int sta_id; - - sta_id = iwl_find_station(priv, addr); - if (sta_id == IWL_INVALID_STATION) - return -ENXIO; - - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].sta.station_flags_msk = 0; - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; - priv->stations[sta_id].sta.add_immediate_ba_tid = (u8)tid; - priv->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - spin_unlock_irqrestore(&priv->sta_lock, flags); - - return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, - CMD_ASYNC); -} -EXPORT_SYMBOL(iwl_rx_agg_start); - -int iwl_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid) -{ - unsigned long flags; - int sta_id; - - sta_id = iwl_find_station(priv, addr); - if (sta_id == IWL_INVALID_STATION) - return -ENXIO; - - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].sta.station_flags_msk = 0; - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; - priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8)tid; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - spin_unlock_irqrestore(&priv->sta_lock, flags); - - return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, - CMD_ASYNC); -} -EXPORT_SYMBOL(iwl_rx_agg_stop); - /* Calculate noise level, based on measurements during network silence just * before arriving beacon. This measurement can be done only if we know @@ -1017,38 +974,6 @@ static inline int iwl_calc_rssi(struct iwl_priv *priv, } -static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) -{ - unsigned long flags; - - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].sta.station_flags &= ~STA_FLG_PWR_SAVE_MSK; - priv->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK; - priv->stations[sta_id].sta.sta.modify_mask = 0; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - spin_unlock_irqrestore(&priv->sta_lock, flags); - - iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); -} - -static void iwl_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr) -{ - /* FIXME: need locking over ps_status ??? */ - u8 sta_id = iwl_find_station(priv, addr); - - if (sta_id != IWL_INVALID_STATION) { - u8 sta_awake = priv->stations[sta_id]. - ps_status == STA_PS_STATUS_WAKE; - - if (sta_awake && ps_bit) - priv->stations[sta_id].ps_status = STA_PS_STATUS_SLEEP; - else if (!sta_awake && !ps_bit) { - iwl_sta_modify_ps_wake(priv, sta_id); - priv->stations[sta_id].ps_status = STA_PS_STATUS_WAKE; - } - } -} - /* This is necessary only for a number of statistics, see the caller. */ static int iwl_is_network_packet(struct iwl_priv *priv, struct ieee80211_hdr *header) diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 0c5f1221b8f3..109136a09c54 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -132,7 +132,7 @@ static int iwl_add_sta_callback(struct iwl_priv *priv, return 1; } -int iwl_send_add_sta(struct iwl_priv *priv, +static int iwl_send_add_sta(struct iwl_priv *priv, struct iwl_addsta_cmd *sta, u8 flags) { struct iwl_rx_packet *res = NULL; @@ -180,7 +180,6 @@ int iwl_send_add_sta(struct iwl_priv *priv, return ret; } -EXPORT_SYMBOL(iwl_send_add_sta); static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index, struct ieee80211_sta_ht_cap *sta_ht_inf) @@ -703,6 +702,55 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, return ret; } +void iwl_update_tkip_key(struct iwl_priv *priv, + struct ieee80211_key_conf *keyconf, + const u8 *addr, u32 iv32, u16 *phase1key) +{ + u8 sta_id = IWL_INVALID_STATION; + unsigned long flags; + __le16 key_flags = 0; + int i; + DECLARE_MAC_BUF(mac); + + sta_id = iwl_find_station(priv, addr); + if (sta_id == IWL_INVALID_STATION) { + IWL_DEBUG_MAC80211("leave - %pM not in station map.\n", + addr); + return; + } + + if (iwl_scan_cancel(priv)) { + /* cancel scan failed, just live w/ bad key and rely + briefly on SW decryption */ + return; + } + + key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); + key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags &= ~STA_KEY_FLG_INVALID; + + if (sta_id == priv->hw_params.bcast_sta_id) + key_flags |= STA_KEY_MULTICAST_MSK; + + spin_lock_irqsave(&priv->sta_lock, flags); + + priv->stations[sta_id].sta.key.key_flags = key_flags; + priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; + + for (i = 0; i < 5; i++) + priv->stations[sta_id].sta.key.tkip_rx_ttak[i] = + cpu_to_le16(phase1key[i]); + + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + + iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + + spin_unlock_irqrestore(&priv->sta_lock, flags); + +} +EXPORT_SYMBOL(iwl_update_tkip_key); + int iwl_remove_dynamic_key(struct iwl_priv *priv, struct ieee80211_key_conf *keyconf, u8 sta_id) @@ -989,9 +1037,9 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) EXPORT_SYMBOL(iwl_get_sta_id); /** - * iwl_sta_modify_enable_tid_tx - Enable Tx for this TID in station table + * iwl_sta_tx_modify_enable_tid - Enable Tx for this TID in station table */ -void iwl_sta_modify_enable_tid_tx(struct iwl_priv *priv, int sta_id, int tid) +void iwl_sta_tx_modify_enable_tid(struct iwl_priv *priv, int sta_id, int tid) { unsigned long flags; @@ -1004,5 +1052,81 @@ void iwl_sta_modify_enable_tid_tx(struct iwl_priv *priv, int sta_id, int tid) iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); } -EXPORT_SYMBOL(iwl_sta_modify_enable_tid_tx); +EXPORT_SYMBOL(iwl_sta_tx_modify_enable_tid); + +int iwl_sta_rx_agg_start(struct iwl_priv *priv, + const u8 *addr, int tid, u16 ssn) +{ + unsigned long flags; + int sta_id; + + sta_id = iwl_find_station(priv, addr); + if (sta_id == IWL_INVALID_STATION) + return -ENXIO; + + spin_lock_irqsave(&priv->sta_lock, flags); + priv->stations[sta_id].sta.station_flags_msk = 0; + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; + priv->stations[sta_id].sta.add_immediate_ba_tid = (u8)tid; + priv->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + spin_unlock_irqrestore(&priv->sta_lock, flags); + + return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, + CMD_ASYNC); +} +EXPORT_SYMBOL(iwl_sta_rx_agg_start); + +int iwl_sta_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid) +{ + unsigned long flags; + int sta_id; + + sta_id = iwl_find_station(priv, addr); + if (sta_id == IWL_INVALID_STATION) + return -ENXIO; + + spin_lock_irqsave(&priv->sta_lock, flags); + priv->stations[sta_id].sta.station_flags_msk = 0; + priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; + priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8)tid; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + spin_unlock_irqrestore(&priv->sta_lock, flags); + + return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, + CMD_ASYNC); +} +EXPORT_SYMBOL(iwl_sta_rx_agg_stop); + +static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) +{ + unsigned long flags; + + spin_lock_irqsave(&priv->sta_lock, flags); + priv->stations[sta_id].sta.station_flags &= ~STA_FLG_PWR_SAVE_MSK; + priv->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK; + priv->stations[sta_id].sta.sta.modify_mask = 0; + priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + spin_unlock_irqrestore(&priv->sta_lock, flags); + + iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); +} + +void iwl_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr) +{ + /* FIXME: need locking over ps_status ??? */ + u8 sta_id = iwl_find_station(priv, addr); + + if (sta_id != IWL_INVALID_STATION) { + u8 sta_awake = priv->stations[sta_id]. + ps_status == STA_PS_STATUS_WAKE; + + if (sta_awake && ps_bit) + priv->stations[sta_id].ps_status = STA_PS_STATUS_SLEEP; + else if (!sta_awake && !ps_bit) { + iwl_sta_modify_ps_wake(priv, sta_id); + priv->stations[sta_id].ps_status = STA_PS_STATUS_WAKE; + } + } +} diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h index 221b93e670a6..61eede5b30cb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.h +++ b/drivers/net/wireless/iwlwifi/iwl-sta.h @@ -47,9 +47,20 @@ int iwl_set_dynamic_key(struct iwl_priv *priv, struct ieee80211_key_conf *key, u8 sta_id); int iwl_remove_dynamic_key(struct iwl_priv *priv, struct ieee80211_key_conf *key, u8 sta_id); +void iwl_update_tkip_key(struct iwl_priv *priv, + struct ieee80211_key_conf *keyconf, + const u8 *addr, u32 iv32, u16 *phase1key); + int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap); int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap); int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr); -void iwl_sta_modify_enable_tid_tx(struct iwl_priv *priv, int sta_id, int tid); int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr); +u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, + int is_ap, u8 flags, + struct ieee80211_sta_ht_cap *ht_info); +void iwl_sta_tx_modify_enable_tid(struct iwl_priv *priv, int sta_id, int tid); +int iwl_sta_rx_agg_start(struct iwl_priv *priv, + const u8 *addr, int tid, u16 ssn); +int iwl_sta_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid); +void iwl_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr); #endif /* __iwl_sta_h__ */ -- cgit v1.2.2 From 417f114bf2efa6183477a75da272c0d452e1cda3 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 12 Nov 2008 13:14:06 -0800 Subject: iwlwifi: rs: remove fc variable and other cleanups This patch 1. Removes use once use only fc variables, they are useless after refactoring ieee80211 frame control handlers 2. Other trivial cleanups Signed-off-by: Tomas Winkler Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 48 ++++++++++++------------------- 1 file changed, 19 insertions(+), 29 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 0332805cc630..d8ac45dc5011 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -281,10 +281,9 @@ static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data, u32 time_diff; s32 index; struct iwl_traffic_load *tl = NULL; - __le16 fc = hdr->frame_control; u8 tid; - if (ieee80211_is_data_qos(fc)) { + if (ieee80211_is_data_qos(hdr->frame_control)) { u8 *qc = ieee80211_get_qos_ctl(hdr); tid = qc[0] & 0xf; } else @@ -773,7 +772,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, int status; u8 retries; int rs_index, index = 0; - struct iwl_lq_sta *lq_sta; + struct iwl_lq_sta *lq_sta = priv_sta; struct iwl_link_quality_cmd *table; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct iwl_priv *priv = (struct iwl_priv *)priv_r; @@ -785,12 +784,12 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, struct iwl_scale_tbl_info tbl_type; struct iwl_scale_tbl_info *curr_tbl, *search_tbl; u8 active_index = 0; - __le16 fc = hdr->frame_control; s32 tpt = 0; IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n"); - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) + if (!ieee80211_is_data(hdr->frame_control) || + is_multicast_ether_addr(hdr->addr1)) return; /* This packet was aggregated but doesn't carry rate scale info */ @@ -803,8 +802,6 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, if (retries > 15) retries = 15; - lq_sta = (struct iwl_lq_sta *)priv_sta; - if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && !lq_sta->ibss_sta_added) goto out; @@ -1675,7 +1672,6 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, int high_tpt = IWL_INVALID_VALUE; u32 fail_count; s8 scale_action = 0; - __le16 fc; u16 rate_mask; u8 update_lq = 0; struct iwl_scale_tbl_info *tbl, *tbl1; @@ -1690,13 +1686,12 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, IWL_DEBUG_RATE("rate scale calculate new rate for skb\n"); - fc = hdr->frame_control; - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) { - /* Send management frames and broadcast/multicast data using - * lowest rate. */ - /* TODO: this could probably be improved.. */ + /* Send management frames and broadcast/multicast data using + * lowest rate. */ + /* TODO: this could probably be improved.. */ + if (!ieee80211_is_data(hdr->frame_control) || + is_multicast_ether_addr(hdr->addr1)) return; - } if (!sta || !lq_sta) return; @@ -2095,29 +2090,26 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, struct ieee80211_tx_rate_control *txrc) { - int i; struct sk_buff *skb = txrc->skb; struct ieee80211_supported_band *sband = txrc->sband; struct iwl_priv *priv = (struct iwl_priv *)priv_r; struct ieee80211_conf *conf = &priv->hw->conf; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - __le16 fc; - struct iwl_lq_sta *lq_sta; + struct iwl_lq_sta *lq_sta = priv_sta; + int rate_idx; IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n"); /* Send management frames and broadcast/multicast data using lowest * rate. */ - fc = hdr->frame_control; - if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) || - !sta || !priv_sta) { + if (!ieee80211_is_data(hdr->frame_control) || + is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) { info->control.rates[0].idx = rate_lowest_index(sband, sta); return; } - lq_sta = (struct iwl_lq_sta *)priv_sta; - i = lq_sta->last_txrate_idx; + rate_idx = lq_sta->last_txrate_idx; if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && !lq_sta->ibss_sta_added) { @@ -2137,14 +2129,12 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, } } - if ((i < 0) || (i > IWL_RATE_COUNT)) { - info->control.rates[0].idx = rate_lowest_index(sband, sta); - return; - } + if (rate_idx < 0 || rate_idx > IWL_RATE_COUNT) + rate_idx = rate_lowest_index(sband, sta); + else if (sband->band == IEEE80211_BAND_5GHZ) + rate_idx -= IWL_FIRST_OFDM_RATE; - if (sband->band == IEEE80211_BAND_5GHZ) - i -= IWL_FIRST_OFDM_RATE; - info->control.rates[0].idx = i; + info->control.rates[0].idx = rate_idx; } static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, -- cgit v1.2.2 From dbce56a456f6d6302a77107088340828dcaf9a02 Mon Sep 17 00:00:00 2001 From: "Chatre, Reinette" Date: Wed, 12 Nov 2008 13:14:07 -0800 Subject: iwlwifi: replace magic constants with define use IWL_CCK_RATES_MASK and IWL_OFDM_RATES_MASK instead of their values directly. Signed-off-by: Reinette Chatre cc: Harvey Harrison Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 4 ++-- drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 03acad24f677..ab599a962874 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -466,9 +466,9 @@ static u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv) /* Set rate mask*/ if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) - rate_mask = priv->active_rate_basic & 0xF; + rate_mask = priv->active_rate_basic & IWL_CCK_RATES_MASK; else - rate_mask = priv->active_rate_basic & 0xFF0; + rate_mask = priv->active_rate_basic & IWL_OFDM_RATES_MASK; /* Find lowest valid rate */ for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 18d2a2a68959..1a923c2fddb0 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1425,9 +1425,9 @@ static u8 iwl3945_rate_get_lowest_plcp(struct iwl3945_priv *priv) /* Set rate mask*/ if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) - rate_mask = priv->active_rate_basic & 0xF; + rate_mask = priv->active_rate_basic & IWL_CCK_RATES_MASK; else - rate_mask = priv->active_rate_basic & 0xFF0; + rate_mask = priv->active_rate_basic & IWL_OFDM_RATES_MASK; for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID; i = iwl3945_rates[i].next_ieee) { -- cgit v1.2.2 From c3056065400aeb437390e1a86b85f9c32fb1c1df Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Wed, 12 Nov 2008 13:14:08 -0800 Subject: iwlwifi : fix checkpatch.pl errors Patch fixes checkpatch.pl errors for iwlwifi. Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945-io.h | 2 +- drivers/net/wireless/iwlwifi/iwl-4965.c | 4 ++-- drivers/net/wireless/iwlwifi/iwl-5000.c | 2 +- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 2 +- drivers/net/wireless/iwlwifi/iwl-agn.c | 5 +++-- drivers/net/wireless/iwlwifi/iwl-hcmd.c | 2 +- drivers/net/wireless/iwlwifi/iwl-io.h | 2 +- drivers/net/wireless/iwlwifi/iwl-tx.c | 2 +- drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 ++-- 9 files changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-io.h b/drivers/net/wireless/iwlwifi/iwl-3945-io.h index 1daa3f05a775..7dea1552a906 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-io.h @@ -107,7 +107,7 @@ static inline int __iwl3945_poll_bit(const char *f, u32 l, int ret = _iwl3945_poll_bit(priv, addr, bits, mask, timeout); IWL_DEBUG_IO("poll_bit(0x%08X, 0x%08X, 0x%08X) - %s- %s %d\n", addr, bits, mask, - unlikely(ret == -ETIMEDOUT)?"timeout":"", f, l); + unlikely(ret == -ETIMEDOUT) ? "timeout" : "", f, l); return ret; } #define iwl3945_poll_bit(priv, addr, bits, mask, timeout) \ diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 17f409864eb6..9007ff2348d3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -661,7 +661,7 @@ static void iwl4965_tx_queue_set_status(struct iwl_priv *priv, int txq_id = txq->q.id; /* Find out whether to activate Tx queue */ - int active = test_bit(txq_id, &priv->txq_ctx_active_msk)?1:0; + int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0; /* Set up and activate */ iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id), @@ -2025,7 +2025,7 @@ static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]); info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags &= ~IEEE80211_TX_CTL_AMPDU; - info->flags |= iwl_is_tx_success(status)? + info->flags |= iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0; iwl_hwrate_to_tx_control(priv, rate_n_flags, info); /* FIXME: code repetition end */ diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index b6d7e91e8dd1..aeb69ee8706f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1111,7 +1111,7 @@ static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv, info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]); info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags &= ~IEEE80211_TX_CTL_AMPDU; - info->flags |= iwl_is_tx_success(status)? + info->flags |= iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0; iwl_hwrate_to_tx_control(priv, rate_n_flags, info); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index d8ac45dc5011..3a2b81291d86 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -2515,7 +2515,7 @@ static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, for (i = 0; i < LQ_SIZE; i++) { desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n" "rate=0x%X\n", - lq_sta->active_tbl == i?"*":"x", + lq_sta->active_tbl == i ? "*" : "x", lq_sta->lq_info[i].lq_type, lq_sta->lq_info[i].is_SGI, lq_sta->lq_info[i].is_fat, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index ab599a962874..e971a893eec8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1492,7 +1492,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) hw_rf_kill = 1; IWL_DEBUG(IWL_DL_RF_KILL, "RF_KILL bit toggled to %s.\n", - hw_rf_kill ? "disable radio":"enable radio"); + hw_rf_kill ? "disable radio" : "enable radio"); /* driver only loads ucode once setting the interface up. * the driver as well won't allow loading if RFKILL is set @@ -3657,7 +3657,8 @@ static ssize_t show_power_level(struct device *d, break; } - p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO)?"fixed":"auto"); + p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO) ? + "fixed" : "auto"); p += sprintf(p, "\tINDEX:%d", level); p += sprintf(p, "\n"); return p - buf + 1; diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 8300f3d00a06..0008a35232b0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -36,7 +36,7 @@ #include "iwl-core.h" -#define IWL_CMD(x) case x : return #x +#define IWL_CMD(x) case x: return #x const char *get_cmd_string(u8 cmd) { diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index 40e0050b7536..bc10435d96e5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -109,7 +109,7 @@ static inline int __iwl_poll_bit(const char *f, u32 l, int ret = _iwl_poll_bit(priv, addr, bits, mask, timeout); IWL_DEBUG_IO("poll_bit(0x%08X, 0x%08X, 0x%08X) - %s- %s %d\n", addr, bits, mask, - unlikely(ret == -ETIMEDOUT)?"timeout":"", f, l); + unlikely(ret == -ETIMEDOUT) ? "timeout" : "", f, l); return ret; } #define iwl_poll_bit(priv, addr, bits, mask, timeout) \ diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 166f0001e01d..d9638d75a970 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -1498,7 +1498,7 @@ static int iwl_tx_status_reply_compressed_ba(struct iwl_priv *priv, ack = bitmap & (1ULL << i); successes += !!ack; IWL_DEBUG_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", - ack? "ACK":"NACK", i, (agg->start_idx + i) & 0xff, + ack ? "ACK" : "NACK", i, (agg->start_idx + i) & 0xff, agg->start_idx + i); } diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 1a923c2fddb0..baa0d6c59d20 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -519,7 +519,7 @@ static inline int iwl3945_is_ready_rf(struct iwl3945_priv *priv) /*************** HOST COMMAND QUEUE FUNCTIONS *****/ -#define IWL_CMD(x) case x : return #x +#define IWL_CMD(x) case x: return #x static const char *get_cmd_string(u8 cmd) { @@ -4320,7 +4320,7 @@ static void iwl3945_irq_tasklet(struct iwl3945_priv *priv) IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL | IWL_DL_ISR, "RF_KILL bit toggled to %s.\n", - hw_rf_kill ? "disable radio":"enable radio"); + hw_rf_kill ? "disable radio" : "enable radio"); /* Queue restart only if RF_KILL switch was set to "kill" * when we loaded driver, and is now set to "enable". -- cgit v1.2.2 From 352bc8de19a7e5e065d422825e226e8e80cd6576 Mon Sep 17 00:00:00 2001 From: "Zhu, Yi" Date: Wed, 12 Nov 2008 13:14:09 -0800 Subject: iwlwifi: configure_filter rewrite The patch rewrites the mac80211 configure_filter handler to better mapping mac80211 filter flags to iwlwifi hardware filter flags. We now can support 5 mac80211 filter flags: FIF_OTHER_BSS, FIF_ALLMULTI, FIF_PROMISC_IN_BSS, FIF_BCN_PRBRESP_PROMISC and FIF_CONTROL. This patch also avoids reconnecting if the filter flags are changed when the STA is associated. Because rx_assoc is used when full rxon is not necessary. Signed-off-by: Zhu Yi Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.h | 1 - drivers/net/wireless/iwlwifi/iwl-agn.c | 65 ++++++++++++++++------------- drivers/net/wireless/iwlwifi/iwl-dev.h | 1 - drivers/net/wireless/iwlwifi/iwl3945-base.c | 62 +++++++++++++++------------ 4 files changed, 70 insertions(+), 59 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index 7187925bd0d5..2a924c10ff93 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -886,7 +886,6 @@ struct iwl3945_priv { struct work_struct report_work; struct work_struct request_scan; struct work_struct beacon_update; - struct work_struct set_monitor; struct tasklet_struct irq_tasklet; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index e971a893eec8..c8ce84a1eef4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2224,27 +2224,6 @@ static void iwl_bg_rf_kill(struct work_struct *work) iwl_rfkill_set_hw_state(priv); } -static void iwl_bg_set_monitor(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, - struct iwl_priv, set_monitor); - int ret; - - IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n"); - - mutex_lock(&priv->mutex); - - ret = iwl_set_mode(priv, NL80211_IFTYPE_MONITOR); - if (ret) { - if (ret == -EAGAIN) - IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n"); - else - IWL_ERROR("iwl_set_mode() failed ret = %d\n", ret); - } - - mutex_unlock(&priv->mutex); -} - static void iwl_bg_run_time_calib_work(struct work_struct *work) { struct iwl_priv *priv = container_of(work, struct iwl_priv, @@ -2890,16 +2869,43 @@ static void iwl_configure_filter(struct ieee80211_hw *hw, int mc_count, struct dev_addr_list *mc_list) { struct iwl_priv *priv = hw->priv; + __le32 *filter_flags = &priv->staging_rxon.filter_flags; + + IWL_DEBUG_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", + changed_flags, *total_flags); - if (changed_flags & (*total_flags) & FIF_OTHER_BSS) { - IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n", - NL80211_IFTYPE_MONITOR, - changed_flags, *total_flags); - /* queue work 'cuz mac80211 is holding a lock which - * prevents us from issuing (synchronous) f/w cmds */ - queue_work(priv->workqueue, &priv->set_monitor); + if (changed_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) { + if (*total_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) + *filter_flags |= RXON_FILTER_PROMISC_MSK; + else + *filter_flags &= ~RXON_FILTER_PROMISC_MSK; + } + if (changed_flags & FIF_ALLMULTI) { + if (*total_flags & FIF_ALLMULTI) + *filter_flags |= RXON_FILTER_ACCEPT_GRP_MSK; + else + *filter_flags &= ~RXON_FILTER_ACCEPT_GRP_MSK; + } + if (changed_flags & FIF_CONTROL) { + if (*total_flags & FIF_CONTROL) + *filter_flags |= RXON_FILTER_CTL2HOST_MSK; + else + *filter_flags &= ~RXON_FILTER_CTL2HOST_MSK; + } + if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { + if (*total_flags & FIF_BCN_PRBRESP_PROMISC) + *filter_flags |= RXON_FILTER_BCON_AWARE_MSK; + else + *filter_flags &= ~RXON_FILTER_BCON_AWARE_MSK; } - *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | + + /* We avoid iwl_commit_rxon here to commit the new filter flags + * since mac80211 will call ieee80211_hw_config immediately. + * (mc_list is not supported at this time). Otherwise, we need to + * queue a background iwl_commit_rxon work. + */ + + *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; } @@ -3796,7 +3802,6 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv) INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish); INIT_WORK(&priv->rf_kill, iwl_bg_rf_kill); INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update); - INIT_WORK(&priv->set_monitor, iwl_bg_set_monitor); INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work); INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start); INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 0e97d6a13225..1b305d8d0cc5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -985,7 +985,6 @@ struct iwl_priv { struct work_struct report_work; struct work_struct request_scan; struct work_struct beacon_update; - struct work_struct set_monitor; struct tasklet_struct irq_tasklet; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index baa0d6c59d20..beba6e3cfbfd 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -5996,24 +5996,6 @@ static void iwl3945_bg_rf_kill(struct work_struct *work) iwl3945_rfkill_set_hw_state(priv); } -static void iwl3945_bg_set_monitor(struct work_struct *work) -{ - struct iwl3945_priv *priv = container_of(work, - struct iwl3945_priv, set_monitor); - - IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n"); - - mutex_lock(&priv->mutex); - - if (!iwl3945_is_ready(priv)) - IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n"); - else - if (iwl3945_set_mode(priv, NL80211_IFTYPE_MONITOR) != 0) - IWL_ERROR("iwl3945_set_mode() failed\n"); - - mutex_unlock(&priv->mutex); -} - #define IWL_SCAN_CHECK_WATCHDOG (7 * HZ) static void iwl3945_bg_scan_check(struct work_struct *data) @@ -6830,16 +6812,43 @@ static void iwl3945_configure_filter(struct ieee80211_hw *hw, int mc_count, struct dev_addr_list *mc_list) { struct iwl3945_priv *priv = hw->priv; + __le32 *filter_flags = &priv->staging_rxon.filter_flags; - if (changed_flags & (*total_flags) & FIF_OTHER_BSS) { - IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n", - NL80211_IFTYPE_MONITOR, - changed_flags, *total_flags); - /* queue work 'cuz mac80211 is holding a lock which - * prevents us from issuing (synchronous) f/w cmds */ - queue_work(priv->workqueue, &priv->set_monitor); + IWL_DEBUG_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", + changed_flags, *total_flags); + + if (changed_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) { + if (*total_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) + *filter_flags |= RXON_FILTER_PROMISC_MSK; + else + *filter_flags &= ~RXON_FILTER_PROMISC_MSK; + } + if (changed_flags & FIF_ALLMULTI) { + if (*total_flags & FIF_ALLMULTI) + *filter_flags |= RXON_FILTER_ACCEPT_GRP_MSK; + else + *filter_flags &= ~RXON_FILTER_ACCEPT_GRP_MSK; + } + if (changed_flags & FIF_CONTROL) { + if (*total_flags & FIF_CONTROL) + *filter_flags |= RXON_FILTER_CTL2HOST_MSK; + else + *filter_flags &= ~RXON_FILTER_CTL2HOST_MSK; } - *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | + if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { + if (*total_flags & FIF_BCN_PRBRESP_PROMISC) + *filter_flags |= RXON_FILTER_BCON_AWARE_MSK; + else + *filter_flags &= ~RXON_FILTER_BCON_AWARE_MSK; + } + + /* We avoid iwl_commit_rxon here to commit the new filter flags + * since mac80211 will call ieee80211_hw_config immediately. + * (mc_list is not supported at this time). Otherwise, we need to + * queue a background iwl_commit_rxon work. + */ + + *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; } @@ -7715,7 +7724,6 @@ static void iwl3945_setup_deferred_work(struct iwl3945_priv *priv) INIT_WORK(&priv->abort_scan, iwl3945_bg_abort_scan); INIT_WORK(&priv->rf_kill, iwl3945_bg_rf_kill); INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update); - INIT_WORK(&priv->set_monitor, iwl3945_bg_set_monitor); INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start); INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start); INIT_DELAYED_WORK(&priv->scan_check, iwl3945_bg_scan_check); -- cgit v1.2.2 From 34faf780cf342b2c83ae40a2eecf33e55f7002a5 Mon Sep 17 00:00:00 2001 From: "Zhu, Yi" Date: Wed, 12 Nov 2008 13:14:10 -0800 Subject: iwlwifi: some fh document fix and cleanup This patch cleans up some flow handler related document. It also removes some blank lines. Signed-off-by: Zhu Yi Acked-by: Tomas Winkler Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-fh.h | 9 ++++----- drivers/net/wireless/iwlwifi/iwl-tx.c | 4 ---- 2 files changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index e46300c28a8f..694ebb0d2ecf 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -440,7 +440,7 @@ static inline u8 iwl_get_dma_hi_addr(dma_addr_t addr) * @lo: low [31:0] portion of the dma address of TX buffer * every even is unaligned on 16 bit boundary * @hi_n_len 0-3 [35:32] portion of dma - * 4-16 length of the tx buffer + * 4-15 length of the tx buffer */ struct iwl_tfd_tb { __le32 lo; @@ -453,7 +453,8 @@ struct iwl_tfd_tb { * Transmit Frame Descriptor (TFD) * * @ __reserved1[3] reserved - * @ num_tbs 0-5 number of active tbs + * @ num_tbs 0-4 number of active tbs + * 5 reserved * 6-7 padding (not used) * @ tbs[20] transmit frame buffer descriptors * @ __pad padding @@ -473,8 +474,6 @@ struct iwl_tfd_tb { * Tx frame, up to 8 KBytes in size. * * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. - * - * Bit fields in the control dword (val0): */ struct iwl_tfd { u8 __reserved1[3]; @@ -485,6 +484,6 @@ struct iwl_tfd { /* Keep Warm Size */ -#define IWL_KW_SIZE 0x1000 /*4k */ +#define IWL_KW_SIZE 0x1000 /* 4k */ #endif /* !__iwl_fh_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index d9638d75a970..9f0705bcd03a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -587,8 +587,6 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv) iwl_release_nic_access(priv); spin_unlock_irqrestore(&priv->lock, flags); - - /* Alloc and init all Tx queues, including the command queue (#4) */ for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) { slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ? @@ -618,11 +616,9 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv) */ void iwl_txq_ctx_stop(struct iwl_priv *priv) { - int txq_id; unsigned long flags; - /* Turn off all Tx DMA fifos */ spin_lock_irqsave(&priv->lock, flags); if (iwl_grab_nic_access(priv)) { -- cgit v1.2.2 From e0737a77d6cba100dea7e53bf490d67d110bc037 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 12 Nov 2008 13:14:11 -0800 Subject: iwlwifi: iwl-fh.h cleanup This patch fix value of upper FH register bound plus it reorders and groups registers in more readable way Signed-off-by: Tomas Winkler Acked-by: Zhu Yi Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-fh.h | 41 +++++++++++++++-------------------- 1 file changed, 17 insertions(+), 24 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 694ebb0d2ecf..bc20acb36aa6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -72,7 +72,7 @@ * Addresses are offsets from device's PCI hardware base address. */ #define FH_MEM_LOWER_BOUND (0x1000) -#define FH_MEM_UPPER_BOUND (0x1EF0) +#define FH_MEM_UPPER_BOUND (0x2000) /** * Keep-Warm (KW) buffer base address. @@ -268,6 +268,8 @@ #define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME (0x00008000) +#define FH_RSCSR_FRAME_SIZE_MSK (0x00003FFF) /* bits 0-13 */ + /** * Rx Shared Status Registers (RSSR) @@ -294,6 +296,13 @@ #define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 +/* TFDB Area - TFDs buffer table */ +#define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) +#define FH_TFDIB_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x900) +#define FH_TFDIB_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x958) +#define FH_TFDIB_CTRL0_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) +#define FH_TFDIB_CTRL1_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) + /** * Transmit DMA Channel Control/Status Registers (TCSR) * @@ -323,6 +332,7 @@ #define FH49_TCSR_CHNL_NUM (7) #define FH50_TCSR_CHNL_NUM (8) +/* TCSR: tx_config register values */ #define FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl)) #define FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ @@ -379,31 +389,13 @@ (FH_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_chnl) | \ FH_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_chnl)) - - -#define FH_REGS_LOWER_BOUND (0x1000) -#define FH_REGS_UPPER_BOUND (0x2000) - /* Tx service channels */ -#define FH_SRVC_CHNL (9) -#define FH_SRVC_LOWER_BOUND (FH_REGS_LOWER_BOUND + 0x9C8) -#define FH_SRVC_UPPER_BOUND (FH_REGS_LOWER_BOUND + 0x9D0) +#define FH_SRVC_CHNL (9) +#define FH_SRVC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9C8) +#define FH_SRVC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) #define FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ (FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) -/* TFDB Area - TFDs buffer table */ -#define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) -#define FH_TFDIB_LOWER_BOUND (FH_REGS_LOWER_BOUND + 0x900) -#define FH_TFDIB_UPPER_BOUND (FH_REGS_LOWER_BOUND + 0x958) -#define FH_TFDIB_CTRL0_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) -#define FH_TFDIB_CTRL1_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) - -/* TCSR: tx_config register values */ -#define FH_RSCSR_FRAME_SIZE_MSK (0x00003FFF) /* bits 0-13 */ - -#define TFD_QUEUE_SIZE_MAX (256) -#define TFD_QUEUE_SIZE_BC_DUP (64) -#define TFD_QUEUE_BC_SIZE (TFD_QUEUE_SIZE_MAX + TFD_QUEUE_SIZE_BC_DUP) /** * struct iwl_rb_status - reseve buffer status @@ -423,9 +415,10 @@ struct iwl_rb_status { } __attribute__ ((packed)); - +#define TFD_QUEUE_SIZE_MAX (256) +#define TFD_QUEUE_SIZE_BC_DUP (64) +#define TFD_QUEUE_BC_SIZE (TFD_QUEUE_SIZE_MAX + TFD_QUEUE_SIZE_BC_DUP) #define IWL_TX_DMA_MASK DMA_BIT_MASK(36) - #define IWL_NUM_OF_TBS 20 static inline u8 iwl_get_dma_hi_addr(dma_addr_t addr) -- cgit v1.2.2 From 91e9900418fb01229094fb83befa3591afcae1e7 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 12 Nov 2008 14:21:55 -0800 Subject: cfg80211: mark negative frequencies as invalid Regulatory rules with negative frequencies are now marked as invalid in is_valid_reg_rule(). Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/reg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 4c7e39d466c4..7a2ce270f4d3 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -330,7 +330,7 @@ static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule) const struct ieee80211_freq_range *freq_range = &rule->freq_range; u32 freq_diff; - if (freq_range->start_freq_khz == 0 || freq_range->end_freq_khz == 0) + if (freq_range->start_freq_khz <= 0 || freq_range->end_freq_khz <= 0) return false; if (freq_range->start_freq_khz > freq_range->end_freq_khz) -- cgit v1.2.2 From 5203cdb6ad430d3313444ddc6486da70af1a60db Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 12 Nov 2008 14:21:56 -0800 Subject: cfg80211: remove switch from __regulatory_hint() We have complete control over REGDOM_SET_BY_* enum passed down to __regulatory_hint() as such there is no need to account for unexpected REGDOM_SET_BY_*'s, lets just remove the switch statement as this code does not change and won't change even when we add 802.11d support. This patch has no functional changes. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/reg.c | 43 +++++++++++++++++-------------------------- 1 file changed, 17 insertions(+), 26 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 7a2ce270f4d3..e44f0052687c 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -698,34 +698,25 @@ int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, else if (r) return r; - switch (set_by) { - case REGDOM_SET_BY_CORE: - case REGDOM_SET_BY_COUNTRY_IE: - case REGDOM_SET_BY_DRIVER: - case REGDOM_SET_BY_USER: - request = kzalloc(sizeof(struct regulatory_request), - GFP_KERNEL); - if (!request) - return -ENOMEM; - - request->alpha2[0] = alpha2[0]; - request->alpha2[1] = alpha2[1]; - request->initiator = set_by; - request->wiphy = wiphy; - request->intersect = intersect; - - kfree(last_request); - last_request = request; - r = call_crda(alpha2); + request = kzalloc(sizeof(struct regulatory_request), + GFP_KERNEL); + if (!request) + return -ENOMEM; + + request->alpha2[0] = alpha2[0]; + request->alpha2[1] = alpha2[1]; + request->initiator = set_by; + request->wiphy = wiphy; + request->intersect = intersect; + + kfree(last_request); + last_request = request; + r = call_crda(alpha2); + #ifndef CONFIG_WIRELESS_OLD_REGULATORY - if (r) - printk(KERN_ERR "cfg80211: Failed calling CRDA\n"); + if (r) + printk(KERN_ERR "cfg80211: Failed calling CRDA\n"); #endif - break; - default: - r = -ENOTSUPP; - break; - } return r; } -- cgit v1.2.2 From 8375af3ba213154041cfbc655f452913f23bfbd5 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 12 Nov 2008 14:21:57 -0800 Subject: cfg80211: remove switch from __set_regdom() We have control over the REGDOM_SET_BY_* macros passed so remove the switch. This patch has no functional changes. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/reg.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index e44f0052687c..290ececd4f11 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -829,21 +829,12 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) reset_regdomains(); /* Country IE parsing coming soon */ - switch (last_request->initiator) { - case REGDOM_SET_BY_CORE: - case REGDOM_SET_BY_DRIVER: - case REGDOM_SET_BY_USER: - if (!is_valid_rd(rd)) { - printk(KERN_ERR "cfg80211: Invalid " - "regulatory domain detected:\n"); - print_regdomain_info(rd); - return -EINVAL; - } - break; - case REGDOM_SET_BY_COUNTRY_IE: /* Not yet */ - WARN_ON(1); - default: - return -EOPNOTSUPP; + + if (!is_valid_rd(rd)) { + printk(KERN_ERR "cfg80211: Invalid " + "regulatory domain detected:\n"); + print_regdomain_info(rd); + return -EINVAL; } if (unlikely(last_request->intersect)) { -- cgit v1.2.2 From b8295acdc323e6e383ec822fc1e95edeb9148513 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 12 Nov 2008 14:21:58 -0800 Subject: cfg80211: separate intersection section in __set_regdom() So far the __set_regdom() code is pretty generic as the intersection case is fairly straight forward; this will however change when 802.11d support is added so lets separate intersection code for now in preparation for 802.11d support. This patch only has slight functional changes. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/reg.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 290ececd4f11..845e2d326632 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -826,10 +826,6 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) if (WARN_ON(!reg_is_valid_request(rd->alpha2))) return -EINVAL; - reset_regdomains(); - - /* Country IE parsing coming soon */ - if (!is_valid_rd(rd)) { printk(KERN_ERR "cfg80211: Invalid " "regulatory domain detected:\n"); @@ -837,16 +833,33 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) return -EINVAL; } - if (unlikely(last_request->intersect)) { + if (!last_request->intersect) { + reset_regdomains(); + cfg80211_regdomain = rd; + return 0; + } + + /* Intersection requires a bit more work */ + + if (last_request->initiator != REGDOM_SET_BY_COUNTRY_IE) { + intersected_rd = regdom_intersect(rd, cfg80211_regdomain); if (!intersected_rd) return -EINVAL; + + /* We can trash what CRDA provided now */ kfree(rd); - rd = intersected_rd; + rd = NULL; + + reset_regdomains(); + cfg80211_regdomain = intersected_rd; + + return 0; } - /* Tada! */ - cfg80211_regdomain = rd; + /* Country IE parsing coming soon */ + reset_regdomains(); + WARN_ON(1); return 0; } -- cgit v1.2.2 From a01ddafd43f7d53a65ef053eb80a4dee58839c1f Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 12 Nov 2008 14:21:59 -0800 Subject: cfg80211: expect different rd in cfg80211 when intersecting When intersecting it is possible that set_regdom() was called with a regulatory domain which we'll only use as an aid to build a final regulatory domain. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/reg.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 845e2d326632..f062b8b7000a 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -880,12 +880,13 @@ int set_regdom(const struct ieee80211_regdomain *rd) } /* This would make this whole thing pointless */ - BUG_ON(rd != cfg80211_regdomain); + if (!last_request->intersect) + BUG_ON(rd != cfg80211_regdomain); /* update all wiphys now with the new established regulatory domain */ update_all_wiphy_regulatory(last_request->initiator); - print_regdomain(rd); + print_regdomain(cfg80211_regdomain); return r; } -- cgit v1.2.2 From 02ba0b3263f4eb41d2a5714cbe99207ae491a964 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 12 Nov 2008 14:22:00 -0800 Subject: cfg80211: call_crda() won't tell us if CRDA was present kobject_uevent_env() can return an error but it just tells us if the uvent was built/sent or not, it doesn't tell us anything about what happened in userspace, whether the udev rule was present nor does it tell us if CRDA was present or not. So remove the informative complaint about it assuming it will tell us such things. Note that you can determine if CRDA is present after loading cfg80211 by using: is_old_static_regdom(cfg80211_regdomain) but this doesn't account for possible user install after initial boot, and also for when the user uses the static EU regulatory domain. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/reg.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index f062b8b7000a..f8e7beb23add 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -711,14 +711,7 @@ int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, kfree(last_request); last_request = request; - r = call_crda(alpha2); - -#ifndef CONFIG_WIRELESS_OLD_REGULATORY - if (r) - printk(KERN_ERR "cfg80211: Failed calling CRDA\n"); -#endif - - return r; + return call_crda(alpha2); } void regulatory_hint(struct wiphy *wiphy, const char *alpha2) -- cgit v1.2.2 From 88dc1c3f7f9058cd5ceae1e4b53453484c7b0364 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 12 Nov 2008 14:22:01 -0800 Subject: cfg80211: mark regdomains with > NL80211_MAX_SUPP_REG_RULES invalid Lets remain consistent and mark rds with > NL80211_MAX_SUPP_REG_RULES number of reg rules as invalid in is_valid_rd(). Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/reg.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index f8e7beb23add..f0ff3d1779da 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -352,6 +352,9 @@ static bool is_valid_rd(const struct ieee80211_regdomain *rd) if (!rd->n_reg_rules) return false; + if (WARN_ON(rd->n_reg_rules > NL80211_MAX_SUPP_REG_RULES)) + return false; + for (i = 0; i < rd->n_reg_rules; i++) { reg_rule = &rd->reg_rules[i]; if (!is_valid_reg_rule(reg_rule)) -- cgit v1.2.2 From 3f2355cb9111ac04e7ae06a4d7044da2ae813863 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 12 Nov 2008 14:22:02 -0800 Subject: cfg80211/mac80211: Add 802.11d support This adds country IE parsing to mac80211 and enables its usage within the new regulatory infrastructure in cfg80211. We parse the country IEs only on management beacons for the BSSID you are associated to and disregard the IEs when the country and environment (indoor, outdoor, any) matches the already processed country IE. To avoid following misinformed or outdated APs we build and use a regulatory domain out of the intersection between what the AP provides us on the country IE and what CRDA is aware is allowed on the same country. A secondary device is allowed to follow only the same country IE as it make no sense for two devices on a system to be in two different countries. In the case the AP is using country IEs for an incorrect country the user may help compliance further by setting the regulatory domain before or after the IE is parsed and in that case another intersection will be performed. CONFIG_WIRELESS_OLD_REGULATORY is supported but requires CRDA present. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 62 ++++++ include/net/wireless.h | 15 ++ net/mac80211/mlme.c | 7 + net/wireless/Kconfig | 11 ++ net/wireless/core.c | 5 +- net/wireless/core.h | 13 ++ net/wireless/nl80211.c | 2 +- net/wireless/reg.c | 479 ++++++++++++++++++++++++++++++++++++++++++++-- net/wireless/reg.h | 21 +- 9 files changed, 591 insertions(+), 24 deletions(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 56b0eb25d927..a6ec928186ad 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1042,6 +1042,68 @@ enum ieee80211_spectrum_mgmt_actioncode { WLAN_ACTION_SPCT_CHL_SWITCH = 4, }; +/* + * IEEE 802.11-2007 7.3.2.9 Country information element + * + * Minimum length is 8 octets, ie len must be evenly + * divisible by 2 + */ + +/* Although the spec says 8 I'm seeing 6 in practice */ +#define IEEE80211_COUNTRY_IE_MIN_LEN 6 + +/* + * For regulatory extension stuff see IEEE 802.11-2007 + * Annex I (page 1141) and Annex J (page 1147). Also + * review 7.3.2.9. + * + * When dot11RegulatoryClassesRequired is true and the + * first_channel/reg_extension_id is >= 201 then the IE + * compromises of the 'ext' struct represented below: + * + * - Regulatory extension ID - when generating IE this just needs + * to be monotonically increasing for each triplet passed in + * the IE + * - Regulatory class - index into set of rules + * - Coverage class - index into air propagation time (Table 7-27), + * in microseconds, you can compute the air propagation time from + * the index by multiplying by 3, so index 10 yields a propagation + * of 10 us. Valid values are 0-31, values 32-255 are not defined + * yet. A value of 0 inicates air propagation of <= 1 us. + * + * See also Table I.2 for Emission limit sets and table + * I.3 for Behavior limit sets. Table J.1 indicates how to map + * a reg_class to an emission limit set and behavior limit set. + */ +#define IEEE80211_COUNTRY_EXTENSION_ID 201 + +/* + * Channels numbers in the IE must be monotonically increasing + * if dot11RegulatoryClassesRequired is not true. + * + * If dot11RegulatoryClassesRequired is true consecutive + * subband triplets following a regulatory triplet shall + * have monotonically increasing first_channel number fields. + * + * Channel numbers shall not overlap. + * + * Note that max_power is signed. + */ +struct ieee80211_country_ie_triplet { + union { + struct { + u8 first_channel; + u8 num_channels; + s8 max_power; + } __attribute__ ((packed)) chans; + struct { + u8 reg_extension_id; + u8 reg_class; + u8 coverage_class; + } __attribute__ ((packed)) ext; + }; +} __attribute__ ((packed)); + /* BACK action code */ enum ieee80211_back_actioncode { WLAN_ACTION_ADDBA_REQ = 0, diff --git a/include/net/wireless.h b/include/net/wireless.h index 412351560b76..c85fa0ea5c51 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -373,4 +373,19 @@ ieee80211_get_response_rate(struct ieee80211_supported_band *sband, * for a regulatory domain structure for the respective country. */ extern void regulatory_hint(struct wiphy *wiphy, const char *alpha2); + +/** + * regulatory_hint_11d - hints a country IE as a regulatory domain + * @wiphy: the wireless device giving the hint (used only for reporting + * conflicts) + * @country_ie: pointer to the country IE + * @country_ie_len: length of the country IE + * + * We will intersect the rd with the what CRDA tells us should apply + * for the alpha2 this country IE belongs to, this prevents APs from + * sending us incorrect or outdated information against a country. + */ +extern void regulatory_hint_11d(struct wiphy *wiphy, + u8 *country_ie, + u8 country_ie_len); #endif /* __NET_WIRELESS_H */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d81a4d2cd3aa..30adaddeed27 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1736,6 +1736,13 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ap_ht_cap_flags); } + if (elems.country_elem) { + /* Note we are only reviewing this on beacons + * for the BSSID we are associated to */ + regulatory_hint_11d(local->hw.wiphy, + elems.country_elem, elems.country_elem_len); + } + ieee80211_bss_info_change_notify(sdata, changed); } diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig index f7c64dbe86cc..e28e2b8fa436 100644 --- a/net/wireless/Kconfig +++ b/net/wireless/Kconfig @@ -1,6 +1,15 @@ config CFG80211 tristate "Improved wireless configuration API" +config CFG80211_REG_DEBUG + bool "cfg80211 regulatory debugging" + depends on CFG80211 + default n + ---help--- + You can enable this if you want to debug regulatory changes. + + If unsure, say N. + config NL80211 bool "nl80211 new netlink interface support" depends on CFG80211 @@ -40,6 +49,8 @@ config WIRELESS_OLD_REGULATORY ieee80211_regdom module parameter. This is being phased out and you should stop using them ASAP. + Note: You will need CRDA if you want 802.11d support + Say Y unless you have installed a new userspace application. Also say Y if have one currently depending on the ieee80211_regdom module parameter and cannot port it to use the new userspace diff --git a/net/wireless/core.c b/net/wireless/core.c index 39e3d10fccde..b96fc0c3f1c4 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -19,7 +19,6 @@ #include "nl80211.h" #include "core.h" #include "sysfs.h" -#include "reg.h" /* name for sysfs, %d is appended */ #define PHY_NAME "phy" @@ -348,6 +347,10 @@ void wiphy_unregister(struct wiphy *wiphy) /* unlock again before freeing */ mutex_unlock(&drv->mtx); + /* If this device got a regulatory hint tell core its + * free to listen now to a new shiny device regulatory hint */ + reg_device_remove(wiphy); + list_del(&drv->list); device_del(&drv->wiphy.dev); debugfs_remove(drv->wiphy.debugfsdir); diff --git a/net/wireless/core.h b/net/wireless/core.h index 771cc5cc7658..f7fb9f413028 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -11,6 +11,7 @@ #include #include #include +#include "reg.h" struct cfg80211_registered_device { struct cfg80211_ops *ops; @@ -21,6 +22,18 @@ struct cfg80211_registered_device { * any call is in progress */ struct mutex mtx; + /* ISO / IEC 3166 alpha2 for which this device is receiving + * country IEs on, this can help disregard country IEs from APs + * on the same alpha2 quickly. The alpha2 may differ from + * cfg80211_regdomain's alpha2 when an intersection has occurred. + * If the AP is reconfigured this can also be used to tell us if + * the country on the country IE changed. */ + char country_ie_alpha2[2]; + + /* If a Country IE has been received this tells us the environment + * which its telling us its in. This defaults to ENVIRON_ANY */ + enum environment_cap env; + /* wiphy index, internal only */ int idx; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index e3e1494e769a..00121ceddb14 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1760,7 +1760,7 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) return -EINVAL; #endif mutex_lock(&cfg80211_drv_mutex); - r = __regulatory_hint(NULL, REGDOM_SET_BY_USER, data); + r = __regulatory_hint(NULL, REGDOM_SET_BY_USER, data, 0, ENVIRON_ANY); mutex_unlock(&cfg80211_drv_mutex); return r; } diff --git a/net/wireless/reg.c b/net/wireless/reg.c index f0ff3d1779da..4dab993ea488 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -60,12 +60,18 @@ * @intersect: indicates whether the wireless core should intersect * the requested regulatory domain with the presently set regulatory * domain. + * @country_ie_checksum: checksum of the last processed and accepted + * country IE + * @country_ie_env: lets us know if the AP is telling us we are outdoor, + * indoor, or if it doesn't matter */ struct regulatory_request { struct wiphy *wiphy; enum reg_set_by initiator; char alpha2[2]; bool intersect; + u32 country_ie_checksum; + enum environment_cap country_ie_env; }; /* Receipt of information from last regulatory request */ @@ -85,6 +91,11 @@ static u32 supported_bandwidths[] = { * information to give us an alpha2 */ static const struct ieee80211_regdomain *cfg80211_regdomain; +/* We use this as a place for the rd structure built from the + * last parsed country IE to rest until CRDA gets back to us with + * what it thinks should apply for the same country */ +static const struct ieee80211_regdomain *country_ie_regdomain; + /* We keep a static world regulatory domain in case of the absence of CRDA */ static const struct ieee80211_regdomain world_regdom = { .n_reg_rules = 1, @@ -264,6 +275,18 @@ static bool is_unknown_alpha2(const char *alpha2) return false; } +static bool is_intersected_alpha2(const char *alpha2) +{ + if (!alpha2) + return false; + /* Special case where regulatory domain is the + * result of an intersection between two regulatory domain + * structures */ + if (alpha2[0] == '9' && alpha2[1] == '8') + return true; + return false; +} + static bool is_an_alpha2(const char *alpha2) { if (!alpha2) @@ -292,6 +315,25 @@ static bool regdom_changed(const char *alpha2) return true; } +/** + * country_ie_integrity_changes - tells us if the country IE has changed + * @checksum: checksum of country IE of fields we are interested in + * + * If the country IE has not changed you can ignore it safely. This is + * useful to determine if two devices are seeing two different country IEs + * even on the same alpha2. Note that this will return false if no IE has + * been set on the wireless core yet. + */ +static bool country_ie_integrity_changes(u32 checksum) +{ + /* If no IE has been set then the checksum doesn't change */ + if (unlikely(!last_request->country_ie_checksum)) + return false; + if (unlikely(last_request->country_ie_checksum != checksum)) + return true; + return false; +} + /* This lets us keep regulatory code which is updated on a regulatory * basis in userspace. */ static int call_crda(const char *alpha2) @@ -379,6 +421,174 @@ static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range, return 0; } +/* Converts a country IE to a regulatory domain. A regulatory domain + * structure has a lot of information which the IE doesn't yet have, + * so for the other values we use upper max values as we will intersect + * with our userspace regulatory agent to get lower bounds. */ +static struct ieee80211_regdomain *country_ie_2_rd( + u8 *country_ie, + u8 country_ie_len, + u32 *checksum) +{ + struct ieee80211_regdomain *rd = NULL; + unsigned int i = 0; + char alpha2[2]; + u32 flags = 0; + u32 num_rules = 0, size_of_regd = 0; + u8 *triplets_start = NULL; + u8 len_at_triplet = 0; + /* the last channel we have registered in a subband (triplet) */ + int last_sub_max_channel = 0; + + *checksum = 0xDEADBEEF; + + /* Country IE requirements */ + BUG_ON(country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN || + country_ie_len & 0x01); + + alpha2[0] = country_ie[0]; + alpha2[1] = country_ie[1]; + + /* + * Third octet can be: + * 'I' - Indoor + * 'O' - Outdoor + * + * anything else we assume is no restrictions + */ + if (country_ie[2] == 'I') + flags = NL80211_RRF_NO_OUTDOOR; + else if (country_ie[2] == 'O') + flags = NL80211_RRF_NO_INDOOR; + + country_ie += 3; + country_ie_len -= 3; + + triplets_start = country_ie; + len_at_triplet = country_ie_len; + + *checksum ^= ((flags ^ alpha2[0] ^ alpha2[1]) << 8); + + /* We need to build a reg rule for each triplet, but first we must + * calculate the number of reg rules we will need. We will need one + * for each channel subband */ + while (country_ie_len >= 3) { + struct ieee80211_country_ie_triplet *triplet = + (struct ieee80211_country_ie_triplet *) country_ie; + int cur_sub_max_channel = 0, cur_channel = 0; + + if (triplet->ext.reg_extension_id >= + IEEE80211_COUNTRY_EXTENSION_ID) { + country_ie += 3; + country_ie_len -= 3; + continue; + } + + cur_channel = triplet->chans.first_channel; + cur_sub_max_channel = ieee80211_channel_to_frequency( + cur_channel + triplet->chans.num_channels); + + /* Basic sanity check */ + if (cur_sub_max_channel < cur_channel) + return NULL; + + /* Do not allow overlapping channels. Also channels + * passed in each subband must be monotonically + * increasing */ + if (last_sub_max_channel) { + if (cur_channel <= last_sub_max_channel) + return NULL; + if (cur_sub_max_channel <= last_sub_max_channel) + return NULL; + } + + /* When dot11RegulatoryClassesRequired is supported + * we can throw ext triplets as part of this soup, + * for now we don't care when those change as we + * don't support them */ + *checksum ^= ((cur_channel ^ cur_sub_max_channel) << 8) | + ((cur_sub_max_channel ^ cur_sub_max_channel) << 16) | + ((triplet->chans.max_power ^ cur_sub_max_channel) << 24); + + last_sub_max_channel = cur_sub_max_channel; + + country_ie += 3; + country_ie_len -= 3; + num_rules++; + + /* Note: this is not a IEEE requirement but + * simply a memory requirement */ + if (num_rules > NL80211_MAX_SUPP_REG_RULES) + return NULL; + } + + country_ie = triplets_start; + country_ie_len = len_at_triplet; + + size_of_regd = sizeof(struct ieee80211_regdomain) + + (num_rules * sizeof(struct ieee80211_reg_rule)); + + rd = kzalloc(size_of_regd, GFP_KERNEL); + if (!rd) + return NULL; + + rd->n_reg_rules = num_rules; + rd->alpha2[0] = alpha2[0]; + rd->alpha2[1] = alpha2[1]; + + /* This time around we fill in the rd */ + while (country_ie_len >= 3) { + struct ieee80211_country_ie_triplet *triplet = + (struct ieee80211_country_ie_triplet *) country_ie; + struct ieee80211_reg_rule *reg_rule = NULL; + struct ieee80211_freq_range *freq_range = NULL; + struct ieee80211_power_rule *power_rule = NULL; + + /* Must parse if dot11RegulatoryClassesRequired is true, + * we don't support this yet */ + if (triplet->ext.reg_extension_id >= + IEEE80211_COUNTRY_EXTENSION_ID) { + country_ie += 3; + country_ie_len -= 3; + continue; + } + + reg_rule = &rd->reg_rules[i]; + freq_range = ®_rule->freq_range; + power_rule = ®_rule->power_rule; + + reg_rule->flags = flags; + + /* The +10 is since the regulatory domain expects + * the actual band edge, not the center of freq for + * its start and end freqs, assuming 20 MHz bandwidth on + * the channels passed */ + freq_range->start_freq_khz = + MHZ_TO_KHZ(ieee80211_channel_to_frequency( + triplet->chans.first_channel) - 10); + freq_range->end_freq_khz = + MHZ_TO_KHZ(ieee80211_channel_to_frequency( + triplet->chans.first_channel + + triplet->chans.num_channels) + 10); + + /* Large arbitrary values, we intersect later */ + /* Increment this if we ever support >= 40 MHz channels + * in IEEE 802.11 */ + freq_range->max_bandwidth_khz = MHZ_TO_KHZ(40); + power_rule->max_antenna_gain = DBI_TO_MBI(100); + power_rule->max_eirp = DBM_TO_MBM(100); + + country_ie += 3; + country_ie_len -= 3; + i++; + + BUG_ON(i > NL80211_MAX_SUPP_REG_RULES); + } + + return rd; +} + + /* Helper for regdom_intersect(), this does the real * mathematical intersection fun */ static int reg_rules_intersect( @@ -663,16 +873,14 @@ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, return -EOPNOTSUPP; return -EALREADY; } - /* Two consecutive Country IE hints on the same wiphy */ - if (!alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) + /* Two consecutive Country IE hints on the same wiphy. + * This should be picked up early by the driver/stack */ + if (WARN_ON(!alpha2_equal(cfg80211_regdomain->alpha2, + alpha2))) return 0; return -EALREADY; } - /* - * Ignore Country IE hints for now, need to think about - * what we need to do to support multi-domain operation. - */ - return -EOPNOTSUPP; + return REG_INTERSECT; case REGDOM_SET_BY_DRIVER: if (last_request->initiator == REGDOM_SET_BY_DRIVER) return -EALREADY; @@ -680,6 +888,11 @@ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, case REGDOM_SET_BY_USER: if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) return REG_INTERSECT; + /* If the user knows better the user should set the regdom + * to their country before the IE is picked up */ + if (last_request->initiator == REGDOM_SET_BY_USER && + last_request->intersect) + return -EOPNOTSUPP; return 0; } @@ -688,7 +901,9 @@ static int ignore_request(struct wiphy *wiphy, enum reg_set_by set_by, /* Caller must hold &cfg80211_drv_mutex */ int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, - const char *alpha2) + const char *alpha2, + u32 country_ie_checksum, + enum environment_cap env) { struct regulatory_request *request; bool intersect = false; @@ -711,9 +926,21 @@ int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, request->initiator = set_by; request->wiphy = wiphy; request->intersect = intersect; + request->country_ie_checksum = country_ie_checksum; + request->country_ie_env = env; kfree(last_request); last_request = request; + /* + * Note: When CONFIG_WIRELESS_OLD_REGULATORY is enabled + * AND if CRDA is NOT present nothing will happen, if someone + * wants to bother with 11d with OLD_REG you can add a timer. + * If after x amount of time nothing happens you can call: + * + * return set_regdom(country_ie_regdomain); + * + * to intersect with the static rd + */ return call_crda(alpha2); } @@ -722,11 +949,120 @@ void regulatory_hint(struct wiphy *wiphy, const char *alpha2) BUG_ON(!alpha2); mutex_lock(&cfg80211_drv_mutex); - __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2); + __regulatory_hint(wiphy, REGDOM_SET_BY_DRIVER, alpha2, 0, ENVIRON_ANY); mutex_unlock(&cfg80211_drv_mutex); } EXPORT_SYMBOL(regulatory_hint); +static bool reg_same_country_ie_hint(struct wiphy *wiphy, + u32 country_ie_checksum) +{ + if (!last_request->wiphy) + return false; + if (likely(last_request->wiphy != wiphy)) + return !country_ie_integrity_changes(country_ie_checksum); + /* We should not have let these through at this point, they + * should have been picked up earlier by the first alpha2 check + * on the device */ + if (WARN_ON(!country_ie_integrity_changes(country_ie_checksum))) + return true; + return false; +} + +void regulatory_hint_11d(struct wiphy *wiphy, + u8 *country_ie, + u8 country_ie_len) +{ + struct ieee80211_regdomain *rd = NULL; + char alpha2[2]; + u32 checksum = 0; + enum environment_cap env = ENVIRON_ANY; + + mutex_lock(&cfg80211_drv_mutex); + + /* IE len must be evenly divisible by 2 */ + if (country_ie_len & 0x01) + goto out; + + if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) + goto out; + + /* Pending country IE processing, this can happen after we + * call CRDA and wait for a response if a beacon was received before + * we were able to process the last regulatory_hint_11d() call */ + if (country_ie_regdomain) + goto out; + + alpha2[0] = country_ie[0]; + alpha2[1] = country_ie[1]; + + if (country_ie[2] == 'I') + env = ENVIRON_INDOOR; + else if (country_ie[2] == 'O') + env = ENVIRON_OUTDOOR; + + /* We will run this for *every* beacon processed for the BSSID, so + * we optimize an early check to exit out early if we don't have to + * do anything */ + if (likely(last_request->wiphy)) { + struct cfg80211_registered_device *drv_last_ie; + + drv_last_ie = wiphy_to_dev(last_request->wiphy); + + /* Lets keep this simple -- we trust the first AP + * after we intersect with CRDA */ + if (likely(last_request->wiphy == wiphy)) { + /* Ignore IEs coming in on this wiphy with + * the same alpha2 and environment cap */ + if (likely(alpha2_equal(drv_last_ie->country_ie_alpha2, + alpha2) && + env == drv_last_ie->env)) { + goto out; + } + /* the wiphy moved on to another BSSID or the AP + * was reconfigured. XXX: We need to deal with the + * case where the user suspends and goes to goes + * to another country, and then gets IEs from an + * AP with different settings */ + goto out; + } else { + /* Ignore IEs coming in on two separate wiphys with + * the same alpha2 and environment cap */ + if (likely(alpha2_equal(drv_last_ie->country_ie_alpha2, + alpha2) && + env == drv_last_ie->env)) { + goto out; + } + /* We could potentially intersect though */ + goto out; + } + } + + rd = country_ie_2_rd(country_ie, country_ie_len, &checksum); + if (!rd) + goto out; + + /* This will not happen right now but we leave it here for the + * the future when we want to add suspend/resume support and having + * the user move to another country after doing so, or having the user + * move to another AP. Right now we just trust the first AP. This is why + * this is marked as likley(). If we hit this before we add this support + * we want to be informed of it as it would indicate a mistake in the + * current design */ + if (likely(WARN_ON(reg_same_country_ie_hint(wiphy, checksum)))) + goto out; + + /* We keep this around for when CRDA comes back with a response so + * we can intersect with that */ + country_ie_regdomain = rd; + + __regulatory_hint(wiphy, REGDOM_SET_BY_COUNTRY_IE, + country_ie_regdomain->alpha2, checksum, env); + +out: + mutex_unlock(&cfg80211_drv_mutex); +} +EXPORT_SYMBOL(regulatory_hint_11d); static void print_rd_rules(const struct ieee80211_regdomain *rd) { @@ -766,7 +1102,25 @@ static void print_rd_rules(const struct ieee80211_regdomain *rd) static void print_regdomain(const struct ieee80211_regdomain *rd) { - if (is_world_regdom(rd->alpha2)) + if (is_intersected_alpha2(rd->alpha2)) { + struct wiphy *wiphy = NULL; + struct cfg80211_registered_device *drv; + + if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) { + if (last_request->wiphy) { + wiphy = last_request->wiphy; + drv = wiphy_to_dev(wiphy); + printk(KERN_INFO "cfg80211: Current regulatory " + "domain updated by AP to: %c%c\n", + drv->country_ie_alpha2[0], + drv->country_ie_alpha2[1]); + } else + printk(KERN_INFO "cfg80211: Current regulatory " + "domain intersected: \n"); + } else + printk(KERN_INFO "cfg80211: Current regulatory " + "intersected: \n"); + } else if (is_world_regdom(rd->alpha2)) printk(KERN_INFO "cfg80211: World regulatory " "domain updated:\n"); else { @@ -789,10 +1143,39 @@ static void print_regdomain_info(const struct ieee80211_regdomain *rd) print_rd_rules(rd); } +#ifdef CONFIG_CFG80211_REG_DEBUG +static void reg_country_ie_process_debug( + const struct ieee80211_regdomain *rd, + const struct ieee80211_regdomain *country_ie_regdomain, + const struct ieee80211_regdomain *intersected_rd) +{ + printk(KERN_DEBUG "cfg80211: Received country IE:\n"); + print_regdomain_info(country_ie_regdomain); + printk(KERN_DEBUG "cfg80211: CRDA thinks this should applied:\n"); + print_regdomain_info(rd); + if (intersected_rd) { + printk(KERN_DEBUG "cfg80211: We intersect both of these " + "and get:\n"); + print_regdomain_info(rd); + return; + } + printk(KERN_DEBUG "cfg80211: Intersection between both failed\n"); +} +#else +static inline void reg_country_ie_process_debug( + const struct ieee80211_regdomain *rd, + const struct ieee80211_regdomain *country_ie_regdomain, + const struct ieee80211_regdomain *intersected_rd) +{ +} +#endif + /* Takes ownership of rd only if it doesn't fail */ static int __set_regdom(const struct ieee80211_regdomain *rd) { const struct ieee80211_regdomain *intersected_rd = NULL; + struct cfg80211_registered_device *drv = NULL; + struct wiphy *wiphy = NULL; /* Some basic sanity checks first */ if (is_world_regdom(rd->alpha2)) { @@ -809,10 +1192,18 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) if (!last_request) return -EINVAL; - /* allow overriding the static definitions if CRDA is present */ - if (!is_old_static_regdom(cfg80211_regdomain) && - !regdom_changed(rd->alpha2)) - return -EINVAL; + /* Lets only bother proceeding on the same alpha2 if the current + * rd is non static (it means CRDA was present and was used last) + * and the pending request came in from a country IE */ + if (last_request->initiator != REGDOM_SET_BY_COUNTRY_IE) { + /* If someone else asked us to change the rd lets only bother + * checking if the alpha2 changes if CRDA was already called */ + if (!is_old_static_regdom(cfg80211_regdomain) && + !regdom_changed(rd->alpha2)) + return -EINVAL; + } + + wiphy = last_request->wiphy; /* Now lets set the regulatory domain, update all driver channels * and finally inform them of what we have done, in case they want @@ -853,9 +1244,47 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) return 0; } - /* Country IE parsing coming soon */ + /* + * Country IE requests are handled a bit differently, we intersect + * the country IE rd with what CRDA believes that country should have + */ + + BUG_ON(!country_ie_regdomain); + + if (rd != country_ie_regdomain) { + /* Intersect what CRDA returned and our what we + * had built from the Country IE received */ + + intersected_rd = regdom_intersect(rd, country_ie_regdomain); + + reg_country_ie_process_debug(rd, country_ie_regdomain, + intersected_rd); + + kfree(country_ie_regdomain); + country_ie_regdomain = NULL; + } else { + /* This would happen when CRDA was not present and + * OLD_REGULATORY was enabled. We intersect our Country + * IE rd and what was set on cfg80211 originally */ + intersected_rd = regdom_intersect(rd, cfg80211_regdomain); + } + + if (!intersected_rd) + return -EINVAL; + + drv = wiphy_to_dev(wiphy); + + drv->country_ie_alpha2[0] = rd->alpha2[0]; + drv->country_ie_alpha2[1] = rd->alpha2[1]; + drv->env = last_request->country_ie_env; + + BUG_ON(intersected_rd == rd); + + kfree(rd); + rd = NULL; + reset_regdomains(); - WARN_ON(1); + cfg80211_regdomain = intersected_rd; return 0; } @@ -887,6 +1316,17 @@ int set_regdom(const struct ieee80211_regdomain *rd) return r; } +/* Caller must hold cfg80211_drv_mutex */ +void reg_device_remove(struct wiphy *wiphy) +{ + if (!last_request->wiphy) + return; + if (last_request->wiphy != wiphy) + return; + last_request->wiphy = NULL; + last_request->country_ie_env = ENVIRON_ANY; +} + int regulatory_init(void) { int err; @@ -906,11 +1346,11 @@ int regulatory_init(void) * that is not a valid ISO / IEC 3166 alpha2 */ if (ieee80211_regdom[0] != 'E' || ieee80211_regdom[1] != 'U') err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, - ieee80211_regdom); + ieee80211_regdom, 0, ENVIRON_ANY); #else cfg80211_regdomain = cfg80211_world_regdom; - err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00"); + err = __regulatory_hint(NULL, REGDOM_SET_BY_CORE, "00", 0, ENVIRON_ANY); if (err) printk(KERN_ERR "cfg80211: calling CRDA failed - " "unable to update world regulatory domain, " @@ -926,6 +1366,9 @@ void regulatory_exit(void) reset_regdomains(); + kfree(country_ie_regdomain); + country_ie_regdomain = NULL; + kfree(last_request); platform_device_unregister(reg_pdev); diff --git a/net/wireless/reg.h b/net/wireless/reg.h index c9b6b6358bbe..a76ea3ff7cd6 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -4,28 +4,41 @@ bool is_world_regdom(const char *alpha2); bool reg_is_valid_request(const char *alpha2); +void reg_device_remove(struct wiphy *wiphy); + int regulatory_init(void); void regulatory_exit(void); int set_regdom(const struct ieee80211_regdomain *rd); +enum environment_cap { + ENVIRON_ANY, + ENVIRON_INDOOR, + ENVIRON_OUTDOOR, +}; + + /** * __regulatory_hint - hint to the wireless core a regulatory domain * @wiphy: if the hint comes from country information from an AP, this * is required to be set to the wiphy that received the information * @alpha2: the ISO/IEC 3166 alpha2 being claimed the regulatory domain * should be in. + * @country_ie_checksum: checksum of processed country IE, set this to 0 + * if the hint did not come from a country IE + * @country_ie_env: the environment the IE told us we are in, %ENVIRON_* * * The Wireless subsystem can use this function to hint to the wireless core - * what it believes should be the current regulatory domain by - * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory - * domain should be in. + * what it believes should be the current regulatory domain by giving it an + * ISO/IEC 3166 alpha2 country code it knows its regulatory domain should be + * in. * * Returns zero if all went fine, %-EALREADY if a regulatory domain had * already been set or other standard error codes. * */ extern int __regulatory_hint(struct wiphy *wiphy, enum reg_set_by set_by, - const char *alpha2); + const char *alpha2, u32 country_ie_checksum, + enum environment_cap country_ie_env); #endif /* __NET_WIRELESS_REG_H */ -- cgit v1.2.2 From 14b9815af3f4fe0e171ee0c4325c31d2a2c1570b Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 12 Nov 2008 14:22:03 -0800 Subject: cfg80211: add support for custom firmware regulatory solutions This adds API to cfg80211 to allow wireless drivers to inform us if their firmware can handle regulatory considerations *and* they cannot map these regulatory domains to an ISO / IEC 3166 alpha2. In these cases we skip the first regulatory hint instead of expecting the driver to build their own regulatory structure, providing us with an alpha2, or using the reg_notifier(). Signed-off-by: Luis R. Rodriguez Acked-by: Zhu Yi Signed-off-by: John W. Linville --- include/net/wireless.h | 7 +++++++ net/wireless/reg.c | 13 ++++++++++++- 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/include/net/wireless.h b/include/net/wireless.h index c85fa0ea5c51..21c5d966142d 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -181,6 +181,11 @@ struct ieee80211_supported_band { * struct wiphy - wireless hardware description * @idx: the wiphy index assigned to this item * @class_dev: the class device representing /sys/class/ieee80211/ + * @fw_handles_regulatory: tells us the firmware for this device + * has its own regulatory solution and cannot identify the + * ISO / IEC 3166 alpha2 it belongs to. When this is enabled + * we will disregard the first regulatory hint (when the + * initiator is %REGDOM_SET_BY_CORE). * @reg_notifier: the driver's regulatory notification callback */ struct wiphy { @@ -192,6 +197,8 @@ struct wiphy { /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ u16 interface_modes; + bool fw_handles_regulatory; + /* If multiple wiphys are registered and you're handed e.g. * a regular netdev with assigned ieee80211_ptr, you won't * know whether it points to a wiphy your driver has registered diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 4dab993ea488..0990059f7e48 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -816,12 +816,23 @@ static void handle_band(struct ieee80211_supported_band *sband) handle_channel(&sband->channels[i]); } +static bool ignore_reg_update(struct wiphy *wiphy, enum reg_set_by setby) +{ + if (!last_request) + return true; + if (setby == REGDOM_SET_BY_CORE && + wiphy->fw_handles_regulatory) + return true; + return false; +} + static void update_all_wiphy_regulatory(enum reg_set_by setby) { struct cfg80211_registered_device *drv; list_for_each_entry(drv, &cfg80211_drv_list, list) - wiphy_update_regulatory(&drv->wiphy, setby); + if (!ignore_reg_update(&drv->wiphy, setby)) + wiphy_update_regulatory(&drv->wiphy, setby); } void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby) -- cgit v1.2.2 From ea4a82dceec7b5782b1259079c8de508d0afe33a Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 12 Nov 2008 14:22:04 -0800 Subject: iwlwifi: enable custom fw regulatory solution This enables the custom firmware regulatory solution option on iwlwifi drivers. These devices are uncapable of mapping their EEPROM regulatory domain to a specific ISO / IEC alpha2. Although the new 11n devices (>= iwl 5000) have only 3 regultaory SKUs -- MOW, ABG (no N) and BG -- the older devices (3945 and 4965) have a more complex SKU arrangement and therefore its not practical to move this to the driver. Signed-off-by: Luis R. Rodriguez Acked-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 3 +++ drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 ++ 2 files changed, 5 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 8bd4d087d4e2..fccd150ae5ca 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -832,6 +832,9 @@ int iwl_setup_mac(struct iwl_priv *priv) BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); + + hw->wiphy->fw_handles_regulatory = true; + /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; /* queues to support 11n aggregation */ diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index beba6e3cfbfd..9330dfaff132 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -7850,6 +7850,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); + hw->wiphy->fw_handles_regulatory = true; + /* 4 EDCA QOS priorities */ hw->queues = 4; -- cgit v1.2.2 From 9f8042021792f8c0e0a7f5b81f326bfab86cda83 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Thu, 13 Nov 2008 17:58:41 +0530 Subject: ath9k: INI update for atheros chipets. init values update for various atheros chipsets. Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/eeprom.c | 5 + drivers/net/wireless/ath9k/hw.c | 62 +++ drivers/net/wireless/ath9k/hw.h | 23 +- drivers/net/wireless/ath9k/initvals.h | 701 ++++++++++++++++++++++++---------- 4 files changed, 586 insertions(+), 205 deletions(-) diff --git a/drivers/net/wireless/ath9k/eeprom.c b/drivers/net/wireless/ath9k/eeprom.c index f5fd03c0edd7..9b2fdc538a8d 100644 --- a/drivers/net/wireless/ath9k/eeprom.c +++ b/drivers/net/wireless/ath9k/eeprom.c @@ -1584,6 +1584,11 @@ u32 ath9k_hw_get_eeprom(struct ath_hal *ah, return pBase->txMask; case EEP_RX_MASK: return pBase->rxMask; + case EEP_RXGAIN_TYPE: + return pBase->rxGainType; + case EEP_TXGAIN_TYPE: + return pBase->txGainType; + default: return 0; } diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c index ff6457e0cb00..efeef2ca5350 100644 --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c @@ -557,6 +557,54 @@ static int ath9k_hw_init_macaddr(struct ath_hal *ah) return 0; } +static void ath9k_hw_init_rxgain_ini(struct ath_hal *ah) +{ + u32 rxgain_type; + struct ath_hal_5416 *ahp = AH5416(ah); + + if (ath9k_hw_get_eeprom(ah, EEP_MINOR_REV) >= AR5416_EEP_MINOR_VER_17) { + rxgain_type = ath9k_hw_get_eeprom(ah, EEP_RXGAIN_TYPE); + + if (rxgain_type == AR5416_EEP_RXGAIN_13DB_BACKOFF) + INIT_INI_ARRAY(&ahp->ah_iniModesRxGain, + ar9280Modes_backoff_13db_rxgain_9280_2, + ARRAY_SIZE(ar9280Modes_backoff_13db_rxgain_9280_2), 6); + else if (rxgain_type == AR5416_EEP_RXGAIN_23DB_BACKOFF) + INIT_INI_ARRAY(&ahp->ah_iniModesRxGain, + ar9280Modes_backoff_23db_rxgain_9280_2, + ARRAY_SIZE(ar9280Modes_backoff_23db_rxgain_9280_2), 6); + else + INIT_INI_ARRAY(&ahp->ah_iniModesRxGain, + ar9280Modes_original_rxgain_9280_2, + ARRAY_SIZE(ar9280Modes_original_rxgain_9280_2), 6); + } else + INIT_INI_ARRAY(&ahp->ah_iniModesRxGain, + ar9280Modes_original_rxgain_9280_2, + ARRAY_SIZE(ar9280Modes_original_rxgain_9280_2), 6); +} + +static void ath9k_hw_init_txgain_ini(struct ath_hal *ah) +{ + u32 txgain_type; + struct ath_hal_5416 *ahp = AH5416(ah); + + if (ath9k_hw_get_eeprom(ah, EEP_MINOR_REV) >= AR5416_EEP_MINOR_VER_19) { + txgain_type = ath9k_hw_get_eeprom(ah, EEP_TXGAIN_TYPE); + + if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER) + INIT_INI_ARRAY(&ahp->ah_iniModesTxGain, + ar9280Modes_high_power_tx_gain_9280_2, + ARRAY_SIZE(ar9280Modes_high_power_tx_gain_9280_2), 6); + else + INIT_INI_ARRAY(&ahp->ah_iniModesTxGain, + ar9280Modes_original_tx_gain_9280_2, + ARRAY_SIZE(ar9280Modes_original_tx_gain_9280_2), 6); + } else + INIT_INI_ARRAY(&ahp->ah_iniModesTxGain, + ar9280Modes_original_tx_gain_9280_2, + ARRAY_SIZE(ar9280Modes_original_tx_gain_9280_2), 6); +} + static int ath9k_hw_post_attach(struct ath_hal *ah) { int ecode; @@ -800,6 +848,14 @@ static struct ath_hal *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc, if (ecode != 0) goto bad; + /* rxgain table */ + if (AR_SREV_9280_20_OR_LATER(ah)) + ath9k_hw_init_rxgain_ini(ah); + + /* txgain table */ + if (AR_SREV_9280_20_OR_LATER(ah)) + ath9k_hw_init_txgain_ini(ah); + #ifndef CONFIG_SLOW_ANT_DIV if (ah->ah_devid == AR9280_DEVID_PCI) { for (i = 0; i < ahp->ah_iniModes.ia_rows; i++) { @@ -1258,6 +1314,12 @@ static int ath9k_hw_process_ini(struct ath_hal *ah, DO_DELAY(regWrites); } + if (AR_SREV_9280_20_OR_LATER(ah)) + REG_WRITE_ARRAY(&ahp->ah_iniModesRxGain, modesIndex, regWrites); + + if (AR_SREV_9280_20_OR_LATER(ah)) + REG_WRITE_ARRAY(&ahp->ah_iniModesTxGain, modesIndex, regWrites); + for (i = 0; i < ahp->ah_iniCommon.ia_rows; i++) { u32 reg = INI_RA(&ahp->ah_iniCommon, i, 0); u32 val = INI_RA(&ahp->ah_iniCommon, i, 1); diff --git a/drivers/net/wireless/ath9k/hw.h b/drivers/net/wireless/ath9k/hw.h index 6a29f2d43c21..02256c3ec076 100644 --- a/drivers/net/wireless/ath9k/hw.h +++ b/drivers/net/wireless/ath9k/hw.h @@ -415,6 +415,9 @@ struct ar5416Stats { #define AR5416_EEP_MINOR_VER_3 0x3 #define AR5416_EEP_MINOR_VER_7 0x7 #define AR5416_EEP_MINOR_VER_9 0x9 +#define AR5416_EEP_MINOR_VER_16 0x10 +#define AR5416_EEP_MINOR_VER_17 0x11 +#define AR5416_EEP_MINOR_VER_19 0x13 #define AR5416_NUM_5G_CAL_PIERS 8 #define AR5416_NUM_2G_CAL_PIERS 4 @@ -436,6 +439,16 @@ struct ar5416Stats { #define AR5416_MAX_CHAINS 3 #define AR5416_PWR_TABLE_OFFSET -5 +/* Rx gain type values */ +#define AR5416_EEP_RXGAIN_23DB_BACKOFF 0 +#define AR5416_EEP_RXGAIN_13DB_BACKOFF 1 +#define AR5416_EEP_RXGAIN_ORIG 2 + +/* Tx gain type values */ +#define AR5416_EEP_TXGAIN_ORIGINAL 0 +#define AR5416_EEP_TXGAIN_HIGH_POWER 1 + + enum eeprom_param { EEP_NFTHRESH_5, EEP_NFTHRESH_2, @@ -454,6 +467,8 @@ enum eeprom_param { EEP_MINOR_REV, EEP_TX_MASK, EEP_RX_MASK, + EEP_RXGAIN_TYPE, + EEP_TXGAIN_TYPE, }; enum ar5416_rates { @@ -485,7 +500,11 @@ struct base_eep_header { u32 binBuildNumber; u8 deviceType; u8 pwdclkind; - u8 futureBase[32]; + u8 futureBase_1[2]; + u8 rxGainType; + u8 futureBase_2[3]; + u8 txGainType; + u8 futureBase_3[25]; } __packed; struct spur_chan { @@ -792,6 +811,8 @@ struct ath_hal_5416 { struct ar5416IniArray ah_iniAddac; struct ar5416IniArray ah_iniPcieSerdes; struct ar5416IniArray ah_iniModesAdditional; + struct ar5416IniArray ah_iniModesRxGain; + struct ar5416IniArray ah_iniModesTxGain; }; #define AH5416(_ah) ((struct ath_hal_5416 *)(_ah)) diff --git a/drivers/net/wireless/ath9k/initvals.h b/drivers/net/wireless/ath9k/initvals.h index 3dd3815940a4..1b08b54b31d7 100644 --- a/drivers/net/wireless/ath9k/initvals.h +++ b/drivers/net/wireless/ath9k/initvals.h @@ -14,6 +14,7 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +/* AR5416 to Fowl ar5146.ini */ static const u32 ar5416Modes_9100[][6] = { { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 }, { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 }, @@ -31,17 +32,17 @@ static const u32 ar5416Modes_9100[][6] = { { 0x00009848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 }, { 0x0000a848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 }, { 0x0000b848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 }, - { 0x00009850, 0x6de8b4e0, 0x6de8b4e0, 0x6de8b0de, 0x6de8b0de, 0x6de8b0de }, + { 0x00009850, 0x6c48b4e0, 0x6c48b4e0, 0x6c48b0de, 0x6c48b0de, 0x6c48b0de }, { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e }, - { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e }, + { 0x0000985c, 0x31395d5e, 0x31395d5e, 0x31395d5e, 0x31395d5e, 0x31395d5e }, { 0x00009860, 0x00049d18, 0x00049d18, 0x00049d18, 0x00049d18, 0x00049d18 }, { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 }, { 0x00009868, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 }, { 0x0000986c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 }, - { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 }, + { 0x00009914, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898, 0x000007d0 }, { 0x00009918, 0x000001b8, 0x00000370, 0x00000268, 0x00000134, 0x00000134 }, { 0x00009924, 0xd0058a0b, 0xd0058a0b, 0xd0058a0b, 0xd0058a0b, 0xd0058a0b }, - { 0x00009944, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020 }, + { 0x00009944, 0xffb81020, 0xffb81020, 0xffb81020, 0xffb81020, 0xffb81020 }, { 0x00009960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 }, { 0x0000a960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 }, { 0x0000b960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 }, @@ -207,7 +208,7 @@ static const u32 ar5416Common_9100[][2] = { { 0x00008134, 0x00000000 }, { 0x00008138, 0x00000000 }, { 0x0000813c, 0x00000000 }, - { 0x00008144, 0x00000000 }, + { 0x00008144, 0xffffffff }, { 0x00008168, 0x00000000 }, { 0x0000816c, 0x00000000 }, { 0x00008170, 0x32143320 }, @@ -266,7 +267,7 @@ static const u32 ar5416Common_9100[][2] = { { 0x0000832c, 0x00000007 }, { 0x00008330, 0x00000302 }, { 0x00008334, 0x00000e00 }, - { 0x00008338, 0x00000000 }, + { 0x00008338, 0x00070000 }, { 0x0000833c, 0x00000000 }, { 0x00008340, 0x000107ff }, { 0x00009808, 0x00000000 }, @@ -661,6 +662,7 @@ static const u32 ar5416Addac_9100[][2] = { {0x000098c4, 0x00000000 }, }; +/* ar5416 - howl ar5416_howl.ini */ static const u32 ar5416Modes[][6] = { { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 }, { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 }, @@ -952,7 +954,7 @@ static const u32 ar5416Common[][2] = { { 0x0000994c, 0x00020028 }, { 0x0000c95c, 0x004b6a8e }, { 0x0000c968, 0x000003ce }, - { 0x00009970, 0x190fb514 }, + { 0x00009970, 0x190fb515 }, { 0x00009974, 0x00000000 }, { 0x00009978, 0x00000001 }, { 0x0000997c, 0x00000000 }, @@ -1311,7 +1313,7 @@ static const u32 ar5416Addac[][2] = { {0x000098cc, 0x00000000 }, }; - +/* AR5416 9160 Sowl ar5416_sowl.ini */ static const u32 ar5416Modes_9160[][6] = { { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 }, { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 }, @@ -1329,21 +1331,22 @@ static const u32 ar5416Modes_9160[][6] = { { 0x00009848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 }, { 0x0000a848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 }, { 0x0000b848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 }, - { 0x00009850, 0x6d48b4e2, 0x6d48b4e2, 0x6d48b0e2, 0x6d48b0e2, 0x6d48b0e2 }, + { 0x00009850, 0x6c48b4e2, 0x6c48b4e2, 0x6c48b0e2, 0x6c48b0e2, 0x6c48b0e2 }, { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e }, - { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e }, + { 0x0000985c, 0x31395d5e, 0x31395d5e, 0x31395d5e, 0x31395d5e, 0x31395d5e }, { 0x00009860, 0x00048d18, 0x00048d18, 0x00048d20, 0x00048d20, 0x00048d18 }, { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 }, { 0x00009868, 0x409a40d0, 0x409a40d0, 0x409a40d0, 0x409a40d0, 0x409a40d0 }, { 0x0000986c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 }, - { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 }, + { 0x00009914, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898, 0x000007d0 }, { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 }, { 0x00009924, 0xd00a8a07, 0xd00a8a07, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d }, - { 0x00009944, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020 }, + { 0x00009944, 0xffb81020, 0xffb81020, 0xffb81020, 0xffb81020, 0xffb81020 }, { 0x00009960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40 }, { 0x0000a960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40 }, { 0x0000b960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40 }, { 0x00009964, 0x00001120, 0x00001120, 0x00001120, 0x00001120, 0x00001120 }, + { 0x0000c968, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce, 0x000003ce }, { 0x0000c9bc, 0x001a0600, 0x001a0600, 0x001a0c00, 0x001a0c00, 0x001a0c00 }, { 0x000099c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, 0x038919be }, { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 }, @@ -1505,7 +1508,7 @@ static const u32 ar5416Common_9160[][2] = { { 0x00008134, 0x00000000 }, { 0x00008138, 0x00000000 }, { 0x0000813c, 0x00000000 }, - { 0x00008144, 0x00000000 }, + { 0x00008144, 0xffffffff }, { 0x00008168, 0x00000000 }, { 0x0000816c, 0x00000000 }, { 0x00008170, 0x32143320 }, @@ -1564,7 +1567,7 @@ static const u32 ar5416Common_9160[][2] = { { 0x0000832c, 0x00000007 }, { 0x00008330, 0x00000302 }, { 0x00008334, 0x00000e00 }, - { 0x00008338, 0x00000000 }, + { 0x00008338, 0x00ff0000 }, { 0x0000833c, 0x00000000 }, { 0x00008340, 0x000107ff }, { 0x00009808, 0x00000000 }, @@ -1597,7 +1600,6 @@ static const u32 ar5416Common_9160[][2] = { { 0x00009958, 0x2108ecff }, { 0x00009940, 0x00750604 }, { 0x0000c95c, 0x004b6a8e }, - { 0x0000c968, 0x000003ce }, { 0x00009970, 0x190fb515 }, { 0x00009974, 0x00000000 }, { 0x00009978, 0x00000001 }, @@ -1699,7 +1701,7 @@ static const u32 ar5416Common_9160[][2] = { { 0x0000a244, 0x00007bb6 }, { 0x0000a248, 0x0fff3ffc }, { 0x0000a24c, 0x00000001 }, - { 0x0000a250, 0x0000a000 }, + { 0x0000a250, 0x0000e000 }, { 0x0000a254, 0x00000000 }, { 0x0000a258, 0x0cc75380 }, { 0x0000a25c, 0x0f0f0f01 }, @@ -1719,7 +1721,7 @@ static const u32 ar5416Common_9160[][2] = { { 0x0000a34c, 0x3fffffff }, { 0x0000a350, 0x3fffffff }, { 0x0000a354, 0x0003ffff }, - { 0x0000a358, 0x79a8aa33 }, + { 0x0000a358, 0x79bfaa03 }, { 0x0000d35c, 0x07ffffef }, { 0x0000d360, 0x0fffffe7 }, { 0x0000d364, 0x17ffffe5 }, @@ -1842,7 +1844,6 @@ static const u32 ar5416Bank3_9160[][3] = { }; static const u32 ar5416Bank6_9160[][3] = { - { 0x0000989c, 0x00000000, 0x00000000 }, { 0x0000989c, 0x00000000, 0x00000000 }, { 0x0000989c, 0x00000000, 0x00000000 }, @@ -1920,7 +1921,6 @@ static const u32 ar5416Bank7_9160[][2] = { { 0x000098cc, 0x0000000e }, }; - static u32 ar5416Addac_9160[][2] = { {0x0000989c, 0x00000000 }, {0x0000989c, 0x00000000 }, @@ -1956,7 +1956,6 @@ static u32 ar5416Addac_9160[][2] = { {0x000098cc, 0x00000000 }, }; - static u32 ar5416Addac_91601_1[][2] = { {0x0000989c, 0x00000000 }, {0x0000989c, 0x00000000 }, @@ -1992,8 +1991,7 @@ static u32 ar5416Addac_91601_1[][2] = { {0x000098cc, 0x00000000 }, }; - - +/* XXX 9280 1 */ static const u32 ar9280Modes_9280[][6] = { { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 }, { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 }, @@ -2543,9 +2541,7 @@ static const u32 ar9280Common_9280[][2] = { { 0x00007898, 0x2a850160 }, }; - - - +/* XXX 9280 2 */ static const u32 ar9280Modes_9280_2[][6] = { { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 }, { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 }, @@ -2560,26 +2556,24 @@ static const u32 ar9280Modes_9280_2[][6] = { { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 }, { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e }, { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 }, - { 0x00009840, 0x206a012e, 0x206a012e, 0x206a022e, 0x206a022e, 0x206a022e }, + { 0x00009840, 0x206a022e, 0x206a022e, 0x206a012e, 0x206a012e, 0x206a012e }, { 0x00009844, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0, 0x037216a0 }, - { 0x00009848, 0x00001066, 0x00001066, 0x00001063, 0x00001063, 0x00001063 }, - { 0x0000a848, 0x00001066, 0x00001066, 0x00001063, 0x00001063, 0x00001063 }, - { 0x00009850, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2, 0x6d4000e2 }, - { 0x00009858, 0x7ec84d2e, 0x7ec84d2e, 0x7ec88d2e, 0x7ec88d2e, 0x7ec88d2e }, - { 0x0000985c, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e }, + { 0x00009850, 0x6c4000e2, 0x6c4000e2, 0x6d4000e2, 0x6c4000e2, 0x6c4000e2 }, + { 0x00009858, 0x7ec88d2e, 0x7ec88d2e, 0x7ec84d2e, 0x7ec84d2e, 0x7ec84d2e }, + { 0x0000985c, 0x31395d5e, 0x31395d5e, 0x3139605e, 0x31395d5e, 0x31395d5e }, { 0x00009860, 0x00048d18, 0x00048d18, 0x00048d20, 0x00048d20, 0x00048d18 }, - { 0x0000c864, 0x0000fe00, 0x0000fe00, 0x0001ce00, 0x0001ce00, 0x0001ce00 }, + { 0x00009864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 }, { 0x00009868, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 }, { 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 }, - { 0x00009914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, 0x000007d0 }, + { 0x00009914, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898, 0x000007d0 }, { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 }, - { 0x00009924, 0xd00a8a07, 0xd00a8a07, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d }, - { 0x00009944, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010, 0xdfbc1010 }, + { 0x00009924, 0xd00a8a0b, 0xd00a8a0b, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d }, + { 0x00009944, 0xffbc1010, 0xffbc1010, 0xffbc1010, 0xffbc1010, 0xffbc1010 }, { 0x00009960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 }, { 0x0000a960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 }, { 0x00009964, 0x00000210, 0x00000210, 0x00000210, 0x00000210, 0x00000210 }, - { 0x0000c9b8, 0x0000000f, 0x0000000f, 0x0000001c, 0x0000001c, 0x0000001c }, - { 0x0000c9bc, 0x00000600, 0x00000600, 0x00000c00, 0x00000c00, 0x00000c00 }, + { 0x000099b8, 0x0000001c, 0x0000001c, 0x0000001c, 0x0000001c, 0x0000001c }, + { 0x000099bc, 0x00000a00, 0x00000a00, 0x00000c00, 0x00000c00, 0x00000c00 }, { 0x000099c0, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 }, { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 }, { 0x000099c8, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329, 0x60f65329 }, @@ -2587,164 +2581,13 @@ static const u32 ar9280Modes_9280_2[][6] = { { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 }, { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, { 0x000099d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, - { 0x00009a00, 0x00008184, 0x00008184, 0x00000290, 0x00000290, 0x00000290 }, - { 0x00009a04, 0x00008188, 0x00008188, 0x00000300, 0x00000300, 0x00000300 }, - { 0x00009a08, 0x0000818c, 0x0000818c, 0x00000304, 0x00000304, 0x00000304 }, - { 0x00009a0c, 0x00008190, 0x00008190, 0x00000308, 0x00000308, 0x00000308 }, - { 0x00009a10, 0x00008194, 0x00008194, 0x0000030c, 0x0000030c, 0x0000030c }, - { 0x00009a14, 0x00008200, 0x00008200, 0x00008000, 0x00008000, 0x00008000 }, - { 0x00009a18, 0x00008204, 0x00008204, 0x00008004, 0x00008004, 0x00008004 }, - { 0x00009a1c, 0x00008208, 0x00008208, 0x00008008, 0x00008008, 0x00008008 }, - { 0x00009a20, 0x0000820c, 0x0000820c, 0x0000800c, 0x0000800c, 0x0000800c }, - { 0x00009a24, 0x00008210, 0x00008210, 0x00008080, 0x00008080, 0x00008080 }, - { 0x00009a28, 0x00008214, 0x00008214, 0x00008084, 0x00008084, 0x00008084 }, - { 0x00009a2c, 0x00008280, 0x00008280, 0x00008088, 0x00008088, 0x00008088 }, - { 0x00009a30, 0x00008284, 0x00008284, 0x0000808c, 0x0000808c, 0x0000808c }, - { 0x00009a34, 0x00008288, 0x00008288, 0x00008100, 0x00008100, 0x00008100 }, - { 0x00009a38, 0x0000828c, 0x0000828c, 0x00008104, 0x00008104, 0x00008104 }, - { 0x00009a3c, 0x00008290, 0x00008290, 0x00008108, 0x00008108, 0x00008108 }, - { 0x00009a40, 0x00008300, 0x00008300, 0x0000810c, 0x0000810c, 0x0000810c }, - { 0x00009a44, 0x00008304, 0x00008304, 0x00008110, 0x00008110, 0x00008110 }, - { 0x00009a48, 0x00008308, 0x00008308, 0x00008114, 0x00008114, 0x00008114 }, - { 0x00009a4c, 0x0000830c, 0x0000830c, 0x00008180, 0x00008180, 0x00008180 }, - { 0x00009a50, 0x00008310, 0x00008310, 0x00008184, 0x00008184, 0x00008184 }, - { 0x00009a54, 0x00008314, 0x00008314, 0x00008188, 0x00008188, 0x00008188 }, - { 0x00009a58, 0x00008380, 0x00008380, 0x0000818c, 0x0000818c, 0x0000818c }, - { 0x00009a5c, 0x00008384, 0x00008384, 0x00008190, 0x00008190, 0x00008190 }, - { 0x00009a60, 0x00008388, 0x00008388, 0x00008194, 0x00008194, 0x00008194 }, - { 0x00009a64, 0x0000838c, 0x0000838c, 0x000081a0, 0x000081a0, 0x000081a0 }, - { 0x00009a68, 0x00008390, 0x00008390, 0x0000820c, 0x0000820c, 0x0000820c }, - { 0x00009a6c, 0x00008394, 0x00008394, 0x000081a8, 0x000081a8, 0x000081a8 }, - { 0x00009a70, 0x0000a380, 0x0000a380, 0x00008284, 0x00008284, 0x00008284 }, - { 0x00009a74, 0x0000a384, 0x0000a384, 0x00008288, 0x00008288, 0x00008288 }, - { 0x00009a78, 0x0000a388, 0x0000a388, 0x00008224, 0x00008224, 0x00008224 }, - { 0x00009a7c, 0x0000a38c, 0x0000a38c, 0x00008290, 0x00008290, 0x00008290 }, - { 0x00009a80, 0x0000a390, 0x0000a390, 0x00008300, 0x00008300, 0x00008300 }, - { 0x00009a84, 0x0000a394, 0x0000a394, 0x00008304, 0x00008304, 0x00008304 }, - { 0x00009a88, 0x0000a780, 0x0000a780, 0x00008308, 0x00008308, 0x00008308 }, - { 0x00009a8c, 0x0000a784, 0x0000a784, 0x0000830c, 0x0000830c, 0x0000830c }, - { 0x00009a90, 0x0000a788, 0x0000a788, 0x00008380, 0x00008380, 0x00008380 }, - { 0x00009a94, 0x0000a78c, 0x0000a78c, 0x00008384, 0x00008384, 0x00008384 }, - { 0x00009a98, 0x0000a790, 0x0000a790, 0x00008700, 0x00008700, 0x00008700 }, - { 0x00009a9c, 0x0000a794, 0x0000a794, 0x00008704, 0x00008704, 0x00008704 }, - { 0x00009aa0, 0x0000ab84, 0x0000ab84, 0x00008708, 0x00008708, 0x00008708 }, - { 0x00009aa4, 0x0000ab88, 0x0000ab88, 0x0000870c, 0x0000870c, 0x0000870c }, - { 0x00009aa8, 0x0000ab8c, 0x0000ab8c, 0x00008780, 0x00008780, 0x00008780 }, - { 0x00009aac, 0x0000ab90, 0x0000ab90, 0x00008784, 0x00008784, 0x00008784 }, - { 0x00009ab0, 0x0000ab94, 0x0000ab94, 0x00008b00, 0x00008b00, 0x00008b00 }, - { 0x00009ab4, 0x0000af80, 0x0000af80, 0x00008b04, 0x00008b04, 0x00008b04 }, - { 0x00009ab8, 0x0000af84, 0x0000af84, 0x00008b08, 0x00008b08, 0x00008b08 }, - { 0x00009abc, 0x0000af88, 0x0000af88, 0x00008b0c, 0x00008b0c, 0x00008b0c }, - { 0x00009ac0, 0x0000af8c, 0x0000af8c, 0x00008b80, 0x00008b80, 0x00008b80 }, - { 0x00009ac4, 0x0000af90, 0x0000af90, 0x00008b84, 0x00008b84, 0x00008b84 }, - { 0x00009ac8, 0x0000af94, 0x0000af94, 0x00008b88, 0x00008b88, 0x00008b88 }, - { 0x00009acc, 0x0000b380, 0x0000b380, 0x00008b8c, 0x00008b8c, 0x00008b8c }, - { 0x00009ad0, 0x0000b384, 0x0000b384, 0x00008b90, 0x00008b90, 0x00008b90 }, - { 0x00009ad4, 0x0000b388, 0x0000b388, 0x00008f80, 0x00008f80, 0x00008f80 }, - { 0x00009ad8, 0x0000b38c, 0x0000b38c, 0x00008f84, 0x00008f84, 0x00008f84 }, - { 0x00009adc, 0x0000b390, 0x0000b390, 0x00008f88, 0x00008f88, 0x00008f88 }, - { 0x00009ae0, 0x0000b394, 0x0000b394, 0x00008f8c, 0x00008f8c, 0x00008f8c }, - { 0x00009ae4, 0x0000b398, 0x0000b398, 0x00008f90, 0x00008f90, 0x00008f90 }, - { 0x00009ae8, 0x0000b780, 0x0000b780, 0x0000930c, 0x0000930c, 0x0000930c }, - { 0x00009aec, 0x0000b784, 0x0000b784, 0x00009310, 0x00009310, 0x00009310 }, - { 0x00009af0, 0x0000b788, 0x0000b788, 0x00009384, 0x00009384, 0x00009384 }, - { 0x00009af4, 0x0000b78c, 0x0000b78c, 0x00009388, 0x00009388, 0x00009388 }, - { 0x00009af8, 0x0000b790, 0x0000b790, 0x00009324, 0x00009324, 0x00009324 }, - { 0x00009afc, 0x0000b794, 0x0000b794, 0x00009704, 0x00009704, 0x00009704 }, - { 0x00009b00, 0x0000b798, 0x0000b798, 0x000096a4, 0x000096a4, 0x000096a4 }, - { 0x00009b04, 0x0000d784, 0x0000d784, 0x000096a8, 0x000096a8, 0x000096a8 }, - { 0x00009b08, 0x0000d788, 0x0000d788, 0x00009710, 0x00009710, 0x00009710 }, - { 0x00009b0c, 0x0000d78c, 0x0000d78c, 0x00009714, 0x00009714, 0x00009714 }, - { 0x00009b10, 0x0000d790, 0x0000d790, 0x00009720, 0x00009720, 0x00009720 }, - { 0x00009b14, 0x0000f780, 0x0000f780, 0x00009724, 0x00009724, 0x00009724 }, - { 0x00009b18, 0x0000f784, 0x0000f784, 0x00009728, 0x00009728, 0x00009728 }, - { 0x00009b1c, 0x0000f788, 0x0000f788, 0x0000972c, 0x0000972c, 0x0000972c }, - { 0x00009b20, 0x0000f78c, 0x0000f78c, 0x000097a0, 0x000097a0, 0x000097a0 }, - { 0x00009b24, 0x0000f790, 0x0000f790, 0x000097a4, 0x000097a4, 0x000097a4 }, - { 0x00009b28, 0x0000f794, 0x0000f794, 0x000097a8, 0x000097a8, 0x000097a8 }, - { 0x00009b2c, 0x0000f7a4, 0x0000f7a4, 0x000097b0, 0x000097b0, 0x000097b0 }, - { 0x00009b30, 0x0000f7a8, 0x0000f7a8, 0x000097b4, 0x000097b4, 0x000097b4 }, - { 0x00009b34, 0x0000f7ac, 0x0000f7ac, 0x000097b8, 0x000097b8, 0x000097b8 }, - { 0x00009b38, 0x0000f7b0, 0x0000f7b0, 0x000097a5, 0x000097a5, 0x000097a5 }, - { 0x00009b3c, 0x0000f7b4, 0x0000f7b4, 0x000097a9, 0x000097a9, 0x000097a9 }, - { 0x00009b40, 0x0000f7a1, 0x0000f7a1, 0x000097ad, 0x000097ad, 0x000097ad }, - { 0x00009b44, 0x0000f7a5, 0x0000f7a5, 0x000097b1, 0x000097b1, 0x000097b1 }, - { 0x00009b48, 0x0000f7a9, 0x0000f7a9, 0x000097b5, 0x000097b5, 0x000097b5 }, - { 0x00009b4c, 0x0000f7ad, 0x0000f7ad, 0x000097b9, 0x000097b9, 0x000097b9 }, - { 0x00009b50, 0x0000f7b1, 0x0000f7b1, 0x000097c5, 0x000097c5, 0x000097c5 }, - { 0x00009b54, 0x0000f7b5, 0x0000f7b5, 0x000097c9, 0x000097c9, 0x000097c9 }, - { 0x00009b58, 0x0000f7c5, 0x0000f7c5, 0x000097d1, 0x000097d1, 0x000097d1 }, - { 0x00009b5c, 0x0000f7c9, 0x0000f7c9, 0x000097d5, 0x000097d5, 0x000097d5 }, - { 0x00009b60, 0x0000f7cd, 0x0000f7cd, 0x000097d9, 0x000097d9, 0x000097d9 }, - { 0x00009b64, 0x0000f7d1, 0x0000f7d1, 0x000097c6, 0x000097c6, 0x000097c6 }, - { 0x00009b68, 0x0000f7d5, 0x0000f7d5, 0x000097ca, 0x000097ca, 0x000097ca }, - { 0x00009b6c, 0x0000f7c2, 0x0000f7c2, 0x000097ce, 0x000097ce, 0x000097ce }, - { 0x00009b70, 0x0000f7c6, 0x0000f7c6, 0x000097d2, 0x000097d2, 0x000097d2 }, - { 0x00009b74, 0x0000f7ca, 0x0000f7ca, 0x000097d6, 0x000097d6, 0x000097d6 }, - { 0x00009b78, 0x0000f7ce, 0x0000f7ce, 0x000097c3, 0x000097c3, 0x000097c3 }, - { 0x00009b7c, 0x0000f7d2, 0x0000f7d2, 0x000097c7, 0x000097c7, 0x000097c7 }, - { 0x00009b80, 0x0000f7d6, 0x0000f7d6, 0x000097cb, 0x000097cb, 0x000097cb }, - { 0x00009b84, 0x0000f7c3, 0x0000f7c3, 0x000097cf, 0x000097cf, 0x000097cf }, - { 0x00009b88, 0x0000f7c7, 0x0000f7c7, 0x000097d7, 0x000097d7, 0x000097d7 }, - { 0x00009b8c, 0x0000f7cb, 0x0000f7cb, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009b90, 0x0000f7d3, 0x0000f7d3, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009b94, 0x0000f7d7, 0x0000f7d7, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009b98, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009b9c, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009ba0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009ba4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009ba8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bac, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bb0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bb4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bb8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bbc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bc0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bc4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bc8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bcc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bd0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bd4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bd8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bdc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009be0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009be4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009be8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bec, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bf0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bf4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bf8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, - { 0x00009bfc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, { 0x0000a204, 0x00000444, 0x00000444, 0x00000444, 0x00000444, 0x00000444 }, - { 0x0000a208, 0x803e4788, 0x803e4788, 0x803e4788, 0x803e4788, 0x803e4788 }, { 0x0000a20c, 0x00000014, 0x00000014, 0x0001f019, 0x0001f019, 0x0001f019 }, { 0x0000b20c, 0x00000014, 0x00000014, 0x0001f019, 0x0001f019, 0x0001f019 }, - { 0x0000a21c, 0x1463800a, 0x1463800a, 0x1463800a, 0x1463800a, 0x1463800a }, + { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a }, { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 }, - { 0x0000a250, 0x001ff000, 0x001ff000, 0x001da000, 0x001da000, 0x001da000 }, + { 0x0000a250, 0x001ff000, 0x001ff000, 0x0004a000, 0x0004a000, 0x0004a000 }, { 0x0000a274, 0x0a19c652, 0x0a19c652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 }, - { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, - { 0x0000a304, 0x00003002, 0x00003002, 0x00003002, 0x00003002, 0x00003002 }, - { 0x0000a308, 0x00006004, 0x00006004, 0x00008009, 0x00008009, 0x00008009 }, - { 0x0000a30c, 0x0000a006, 0x0000a006, 0x0000b00b, 0x0000b00b, 0x0000b00b }, - { 0x0000a310, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012 }, - { 0x0000a314, 0x00011014, 0x00011014, 0x00012048, 0x00012048, 0x00012048 }, - { 0x0000a318, 0x0001504a, 0x0001504a, 0x0001604a, 0x0001604a, 0x0001604a }, - { 0x0000a31c, 0x0001904c, 0x0001904c, 0x0001a211, 0x0001a211, 0x0001a211 }, - { 0x0000a320, 0x0001c04e, 0x0001c04e, 0x0001e213, 0x0001e213, 0x0001e213 }, - { 0x0000a324, 0x00020092, 0x00020092, 0x0002121b, 0x0002121b, 0x0002121b }, - { 0x0000a328, 0x0002410a, 0x0002410a, 0x00024412, 0x00024412, 0x00024412 }, - { 0x0000a32c, 0x0002710c, 0x0002710c, 0x00028414, 0x00028414, 0x00028414 }, - { 0x0000a330, 0x0002b18b, 0x0002b18b, 0x0002b44a, 0x0002b44a, 0x0002b44a }, - { 0x0000a334, 0x0002e1cc, 0x0002e1cc, 0x00030649, 0x00030649, 0x00030649 }, - { 0x0000a338, 0x000321ec, 0x000321ec, 0x0003364b, 0x0003364b, 0x0003364b }, - { 0x0000a33c, 0x000321ec, 0x000321ec, 0x00038a49, 0x00038a49, 0x00038a49 }, - { 0x0000a340, 0x000321ec, 0x000321ec, 0x0003be48, 0x0003be48, 0x0003be48 }, - { 0x0000a344, 0x000321ec, 0x000321ec, 0x0003ee4a, 0x0003ee4a, 0x0003ee4a }, - { 0x0000a348, 0x000321ec, 0x000321ec, 0x00042e88, 0x00042e88, 0x00042e88 }, - { 0x0000a34c, 0x000321ec, 0x000321ec, 0x00046e8a, 0x00046e8a, 0x00046e8a }, - { 0x0000a350, 0x000321ec, 0x000321ec, 0x00049ec9, 0x00049ec9, 0x00049ec9 }, - { 0x0000a354, 0x000321ec, 0x000321ec, 0x0004bf42, 0x0004bf42, 0x0004bf42 }, { 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e }, { 0x0000a3d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, { 0x00007894, 0x5a508000, 0x5a508000, 0x5a508000, 0x5a508000, 0x5a508000 }, @@ -2884,7 +2727,7 @@ static const u32 ar9280Common_9280_2[][2] = { { 0x00008134, 0x00000000 }, { 0x00008138, 0x00000000 }, { 0x0000813c, 0x00000000 }, - { 0x00008144, 0x00000000 }, + { 0x00008144, 0xffffffff }, { 0x00008168, 0x00000000 }, { 0x0000816c, 0x00000000 }, { 0x00008170, 0x32143320 }, @@ -2923,6 +2766,7 @@ static const u32 ar9280Common_9280_2[][2] = { { 0x00008258, 0x00000000 }, { 0x0000825c, 0x400000ff }, { 0x00008260, 0x00080922 }, + { 0x00008264, 0xa8a00010 }, { 0x00008270, 0x00000000 }, { 0x00008274, 0x40000000 }, { 0x00008278, 0x003e4180 }, @@ -2939,7 +2783,7 @@ static const u32 ar9280Common_9280_2[][2] = { { 0x0000832c, 0x00000007 }, { 0x00008330, 0x00000302 }, { 0x00008334, 0x00000e00 }, - { 0x00008338, 0x00000000 }, + { 0x00008338, 0x00ff0000 }, { 0x0000833c, 0x00000000 }, { 0x00008340, 0x000107ff }, { 0x00008344, 0x00581043 }, @@ -2973,7 +2817,7 @@ static const u32 ar9280Common_9280_2[][2] = { { 0x00009958, 0x2108ecff }, { 0x00009940, 0x14750604 }, { 0x0000c95c, 0x004b6a8e }, - { 0x0000c968, 0x000003ce }, + { 0x00009968, 0x000003ce }, { 0x00009970, 0x190fb515 }, { 0x00009974, 0x00000000 }, { 0x00009978, 0x00000001 }, @@ -2999,13 +2843,14 @@ static const u32 ar9280Common_9280_2[][2] = { { 0x000099ec, 0x0cc80caa }, { 0x000099f0, 0x00000000 }, { 0x000099fc, 0x00001042 }, + { 0x0000a208, 0x803e4788 }, { 0x0000a210, 0x4080a333 }, { 0x0000a214, 0x40206c10 }, { 0x0000a218, 0x009c4060 }, { 0x0000a220, 0x01834061 }, { 0x0000a224, 0x00000400 }, { 0x0000a228, 0x000003b5 }, - { 0x0000a22c, 0x233f71c0 }, + { 0x0000a22c, 0x233f7180 }, { 0x0000a234, 0x20202020 }, { 0x0000a238, 0x20202020 }, { 0x0000a23c, 0x13c88000 }, @@ -3022,7 +2867,6 @@ static const u32 ar9280Common_9280_2[][2] = { { 0x0000b26c, 0x0ebae9c6 }, { 0x0000d270, 0x00820820 }, { 0x0000a278, 0x1ce739ce }, - { 0x0000a27c, 0x050701ce }, { 0x0000d35c, 0x07ffffef }, { 0x0000d360, 0x0fffffe7 }, { 0x0000d364, 0x17ffffe5 }, @@ -3064,7 +2908,6 @@ static const u32 ar9280Common_9280_2[][2] = { { 0x00007808, 0x04924914 }, { 0x0000780c, 0x21084210 }, { 0x00007810, 0x6d801300 }, - { 0x00007814, 0x0019beff }, { 0x00007818, 0x07e41000 }, { 0x0000781c, 0x00392000 }, { 0x00007820, 0x92592480 }, @@ -3073,7 +2916,6 @@ static const u32 ar9280Common_9280_2[][2] = { { 0x0000782c, 0x04924914 }, { 0x00007830, 0x21084210 }, { 0x00007834, 0x6d801300 }, - { 0x00007838, 0x0019beff }, { 0x0000783c, 0x07e40000 }, { 0x00007840, 0x00392000 }, { 0x00007844, 0x92592480 }, @@ -3110,12 +2952,465 @@ static const u32 ar9280Modes_fast_clock_9280_2[][3] = { { 0x00009828, 0x0b020001, 0x0b020001 }, { 0x00009834, 0x00000f0f, 0x00000f0f }, { 0x00009844, 0x03721821, 0x03721821 }, - { 0x00009914, 0x00000898, 0x00000898 }, + { 0x00009914, 0x00000898, 0x00001130 }, { 0x00009918, 0x0000000b, 0x00000016 }, { 0x00009944, 0xdfbc1210, 0xdfbc1210 }, }; +static const u32 ar9280Modes_backoff_23db_rxgain_9280_2[][6] = { + { 0x00009a00, 0x00008184, 0x00008184, 0x00000290, 0x00000290, 0x00000290 }, + { 0x00009a04, 0x00008188, 0x00008188, 0x00000300, 0x00000300, 0x00000300 }, + { 0x00009a08, 0x0000818c, 0x0000818c, 0x00000304, 0x00000304, 0x00000304 }, + { 0x00009a0c, 0x00008190, 0x00008190, 0x00000308, 0x00000308, 0x00000308 }, + { 0x00009a10, 0x00008194, 0x00008194, 0x0000030c, 0x0000030c, 0x0000030c }, + { 0x00009a14, 0x00008200, 0x00008200, 0x00008000, 0x00008000, 0x00008000 }, + { 0x00009a18, 0x00008204, 0x00008204, 0x00008004, 0x00008004, 0x00008004 }, + { 0x00009a1c, 0x00008208, 0x00008208, 0x00008008, 0x00008008, 0x00008008 }, + { 0x00009a20, 0x0000820c, 0x0000820c, 0x0000800c, 0x0000800c, 0x0000800c }, + { 0x00009a24, 0x00008210, 0x00008210, 0x00008080, 0x00008080, 0x00008080 }, + { 0x00009a28, 0x00008214, 0x00008214, 0x00008084, 0x00008084, 0x00008084 }, + { 0x00009a2c, 0x00008280, 0x00008280, 0x00008088, 0x00008088, 0x00008088 }, + { 0x00009a30, 0x00008284, 0x00008284, 0x0000808c, 0x0000808c, 0x0000808c }, + { 0x00009a34, 0x00008288, 0x00008288, 0x00008100, 0x00008100, 0x00008100 }, + { 0x00009a38, 0x0000828c, 0x0000828c, 0x00008104, 0x00008104, 0x00008104 }, + { 0x00009a3c, 0x00008290, 0x00008290, 0x00008108, 0x00008108, 0x00008108 }, + { 0x00009a40, 0x00008300, 0x00008300, 0x0000810c, 0x0000810c, 0x0000810c }, + { 0x00009a44, 0x00008304, 0x00008304, 0x00008110, 0x00008110, 0x00008110 }, + { 0x00009a48, 0x00008308, 0x00008308, 0x00008114, 0x00008114, 0x00008114 }, + { 0x00009a4c, 0x0000830c, 0x0000830c, 0x00008180, 0x00008180, 0x00008180 }, + { 0x00009a50, 0x00008310, 0x00008310, 0x00008184, 0x00008184, 0x00008184 }, + { 0x00009a54, 0x00008314, 0x00008314, 0x00008188, 0x00008188, 0x00008188 }, + { 0x00009a58, 0x00008380, 0x00008380, 0x0000818c, 0x0000818c, 0x0000818c }, + { 0x00009a5c, 0x00008384, 0x00008384, 0x00008190, 0x00008190, 0x00008190 }, + { 0x00009a60, 0x00008388, 0x00008388, 0x00008194, 0x00008194, 0x00008194 }, + { 0x00009a64, 0x0000838c, 0x0000838c, 0x000081a0, 0x000081a0, 0x000081a0 }, + { 0x00009a68, 0x00008390, 0x00008390, 0x0000820c, 0x0000820c, 0x0000820c }, + { 0x00009a6c, 0x00008394, 0x00008394, 0x000081a8, 0x000081a8, 0x000081a8 }, + { 0x00009a70, 0x0000a380, 0x0000a380, 0x00008284, 0x00008284, 0x00008284 }, + { 0x00009a74, 0x0000a384, 0x0000a384, 0x00008288, 0x00008288, 0x00008288 }, + { 0x00009a78, 0x0000a388, 0x0000a388, 0x00008224, 0x00008224, 0x00008224 }, + { 0x00009a7c, 0x0000a38c, 0x0000a38c, 0x00008290, 0x00008290, 0x00008290 }, + { 0x00009a80, 0x0000a390, 0x0000a390, 0x00008300, 0x00008300, 0x00008300 }, + { 0x00009a84, 0x0000a394, 0x0000a394, 0x00008304, 0x00008304, 0x00008304 }, + { 0x00009a88, 0x0000a780, 0x0000a780, 0x00008308, 0x00008308, 0x00008308 }, + { 0x00009a8c, 0x0000a784, 0x0000a784, 0x0000830c, 0x0000830c, 0x0000830c }, + { 0x00009a90, 0x0000a788, 0x0000a788, 0x00008380, 0x00008380, 0x00008380 }, + { 0x00009a94, 0x0000a78c, 0x0000a78c, 0x00008384, 0x00008384, 0x00008384 }, + { 0x00009a98, 0x0000a790, 0x0000a790, 0x00008700, 0x00008700, 0x00008700 }, + { 0x00009a9c, 0x0000a794, 0x0000a794, 0x00008704, 0x00008704, 0x00008704 }, + { 0x00009aa0, 0x0000ab84, 0x0000ab84, 0x00008708, 0x00008708, 0x00008708 }, + { 0x00009aa4, 0x0000ab88, 0x0000ab88, 0x0000870c, 0x0000870c, 0x0000870c }, + { 0x00009aa8, 0x0000ab8c, 0x0000ab8c, 0x00008780, 0x00008780, 0x00008780 }, + { 0x00009aac, 0x0000ab90, 0x0000ab90, 0x00008784, 0x00008784, 0x00008784 }, + { 0x00009ab0, 0x0000ab94, 0x0000ab94, 0x00008b00, 0x00008b00, 0x00008b00 }, + { 0x00009ab4, 0x0000af80, 0x0000af80, 0x00008b04, 0x00008b04, 0x00008b04 }, + { 0x00009ab8, 0x0000af84, 0x0000af84, 0x00008b08, 0x00008b08, 0x00008b08 }, + { 0x00009abc, 0x0000af88, 0x0000af88, 0x00008b0c, 0x00008b0c, 0x00008b0c }, + { 0x00009ac0, 0x0000af8c, 0x0000af8c, 0x00008b10, 0x00008b10, 0x00008b10 }, + { 0x00009ac4, 0x0000af90, 0x0000af90, 0x00008b14, 0x00008b14, 0x00008b14 }, + { 0x00009ac8, 0x0000af94, 0x0000af94, 0x00008b01, 0x00008b01, 0x00008b01 }, + { 0x00009acc, 0x0000b380, 0x0000b380, 0x00008b05, 0x00008b05, 0x00008b05 }, + { 0x00009ad0, 0x0000b384, 0x0000b384, 0x00008b09, 0x00008b09, 0x00008b09 }, + { 0x00009ad4, 0x0000b388, 0x0000b388, 0x00008b0d, 0x00008b0d, 0x00008b0d }, + { 0x00009ad8, 0x0000b38c, 0x0000b38c, 0x00008b11, 0x00008b11, 0x00008b11 }, + { 0x00009adc, 0x0000b390, 0x0000b390, 0x00008b15, 0x00008b15, 0x00008b15 }, + { 0x00009ae0, 0x0000b394, 0x0000b394, 0x00008b02, 0x00008b02, 0x00008b02 }, + { 0x00009ae4, 0x0000b398, 0x0000b398, 0x00008b06, 0x00008b06, 0x00008b06 }, + { 0x00009ae8, 0x0000b780, 0x0000b780, 0x00008b0a, 0x00008b0a, 0x00008b0a }, + { 0x00009aec, 0x0000b784, 0x0000b784, 0x00008b0e, 0x00008b0e, 0x00008b0e }, + { 0x00009af0, 0x0000b788, 0x0000b788, 0x00008b12, 0x00008b12, 0x00008b12 }, + { 0x00009af4, 0x0000b78c, 0x0000b78c, 0x00008b16, 0x00008b16, 0x00008b16 }, + { 0x00009af8, 0x0000b790, 0x0000b790, 0x00008b03, 0x00008b03, 0x00008b03 }, + { 0x00009afc, 0x0000b794, 0x0000b794, 0x00008b07, 0x00008b07, 0x00008b07 }, + { 0x00009b00, 0x0000b798, 0x0000b798, 0x00008b0b, 0x00008b0b, 0x00008b0b }, + { 0x00009b04, 0x0000d784, 0x0000d784, 0x00008b0f, 0x00008b0f, 0x00008b0f }, + { 0x00009b08, 0x0000d788, 0x0000d788, 0x00008b13, 0x00008b13, 0x00008b13 }, + { 0x00009b0c, 0x0000d78c, 0x0000d78c, 0x00008b17, 0x00008b17, 0x00008b17 }, + { 0x00009b10, 0x0000d790, 0x0000d790, 0x00008b23, 0x00008b23, 0x00008b23 }, + { 0x00009b14, 0x0000f780, 0x0000f780, 0x00008b27, 0x00008b27, 0x00008b27 }, + { 0x00009b18, 0x0000f784, 0x0000f784, 0x00008b2b, 0x00008b2b, 0x00008b2b }, + { 0x00009b1c, 0x0000f788, 0x0000f788, 0x00008b2f, 0x00008b2f, 0x00008b2f }, + { 0x00009b20, 0x0000f78c, 0x0000f78c, 0x00008b33, 0x00008b33, 0x00008b33 }, + { 0x00009b24, 0x0000f790, 0x0000f790, 0x00008b37, 0x00008b37, 0x00008b37 }, + { 0x00009b28, 0x0000f794, 0x0000f794, 0x00008b43, 0x00008b43, 0x00008b43 }, + { 0x00009b2c, 0x0000f7a4, 0x0000f7a4, 0x00008b47, 0x00008b47, 0x00008b47 }, + { 0x00009b30, 0x0000f7a8, 0x0000f7a8, 0x00008b4b, 0x00008b4b, 0x00008b4b }, + { 0x00009b34, 0x0000f7ac, 0x0000f7ac, 0x00008b4f, 0x00008b4f, 0x00008b4f }, + { 0x00009b38, 0x0000f7b0, 0x0000f7b0, 0x00008b53, 0x00008b53, 0x00008b53 }, + { 0x00009b3c, 0x0000f7b4, 0x0000f7b4, 0x00008b57, 0x00008b57, 0x00008b57 }, + { 0x00009b40, 0x0000f7a1, 0x0000f7a1, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b44, 0x0000f7a5, 0x0000f7a5, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b48, 0x0000f7a9, 0x0000f7a9, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b4c, 0x0000f7ad, 0x0000f7ad, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b50, 0x0000f7b1, 0x0000f7b1, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b54, 0x0000f7b5, 0x0000f7b5, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b58, 0x0000f7c5, 0x0000f7c5, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b5c, 0x0000f7c9, 0x0000f7c9, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b60, 0x0000f7cd, 0x0000f7cd, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b64, 0x0000f7d1, 0x0000f7d1, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b68, 0x0000f7d5, 0x0000f7d5, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b6c, 0x0000f7c2, 0x0000f7c2, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b70, 0x0000f7c6, 0x0000f7c6, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b74, 0x0000f7ca, 0x0000f7ca, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b78, 0x0000f7ce, 0x0000f7ce, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b7c, 0x0000f7d2, 0x0000f7d2, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b80, 0x0000f7d6, 0x0000f7d6, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b84, 0x0000f7c3, 0x0000f7c3, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b88, 0x0000f7c7, 0x0000f7c7, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b8c, 0x0000f7cb, 0x0000f7cb, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b90, 0x0000f7d3, 0x0000f7d3, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b94, 0x0000f7d7, 0x0000f7d7, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b98, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009b9c, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009ba0, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009ba4, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009ba8, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bac, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bb0, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bb4, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bb8, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bbc, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bc0, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bc4, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bc8, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bcc, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bd0, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bd4, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bd8, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bdc, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009be0, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009be4, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009be8, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bec, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bf0, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bf4, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bf8, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009bfc, 0x0000f7db, 0x0000f7db, 0x00008b5b, 0x00008b5b, 0x00008b5b }, + { 0x00009848, 0x00001066, 0x00001066, 0x00001050, 0x00001050, 0x00001050 }, + { 0x0000a848, 0x00001066, 0x00001066, 0x00001050, 0x00001050, 0x00001050 }, +}; + +static const u32 ar9280Modes_original_rxgain_9280_2[][6] = { + { 0x00009a00, 0x00008184, 0x00008184, 0x00000290, 0x00000290, 0x00000290 }, + { 0x00009a04, 0x00008188, 0x00008188, 0x00000300, 0x00000300, 0x00000300 }, + { 0x00009a08, 0x0000818c, 0x0000818c, 0x00000304, 0x00000304, 0x00000304 }, + { 0x00009a0c, 0x00008190, 0x00008190, 0x00000308, 0x00000308, 0x00000308 }, + { 0x00009a10, 0x00008194, 0x00008194, 0x0000030c, 0x0000030c, 0x0000030c }, + { 0x00009a14, 0x00008200, 0x00008200, 0x00008000, 0x00008000, 0x00008000 }, + { 0x00009a18, 0x00008204, 0x00008204, 0x00008004, 0x00008004, 0x00008004 }, + { 0x00009a1c, 0x00008208, 0x00008208, 0x00008008, 0x00008008, 0x00008008 }, + { 0x00009a20, 0x0000820c, 0x0000820c, 0x0000800c, 0x0000800c, 0x0000800c }, + { 0x00009a24, 0x00008210, 0x00008210, 0x00008080, 0x00008080, 0x00008080 }, + { 0x00009a28, 0x00008214, 0x00008214, 0x00008084, 0x00008084, 0x00008084 }, + { 0x00009a2c, 0x00008280, 0x00008280, 0x00008088, 0x00008088, 0x00008088 }, + { 0x00009a30, 0x00008284, 0x00008284, 0x0000808c, 0x0000808c, 0x0000808c }, + { 0x00009a34, 0x00008288, 0x00008288, 0x00008100, 0x00008100, 0x00008100 }, + { 0x00009a38, 0x0000828c, 0x0000828c, 0x00008104, 0x00008104, 0x00008104 }, + { 0x00009a3c, 0x00008290, 0x00008290, 0x00008108, 0x00008108, 0x00008108 }, + { 0x00009a40, 0x00008300, 0x00008300, 0x0000810c, 0x0000810c, 0x0000810c }, + { 0x00009a44, 0x00008304, 0x00008304, 0x00008110, 0x00008110, 0x00008110 }, + { 0x00009a48, 0x00008308, 0x00008308, 0x00008114, 0x00008114, 0x00008114 }, + { 0x00009a4c, 0x0000830c, 0x0000830c, 0x00008180, 0x00008180, 0x00008180 }, + { 0x00009a50, 0x00008310, 0x00008310, 0x00008184, 0x00008184, 0x00008184 }, + { 0x00009a54, 0x00008314, 0x00008314, 0x00008188, 0x00008188, 0x00008188 }, + { 0x00009a58, 0x00008380, 0x00008380, 0x0000818c, 0x0000818c, 0x0000818c }, + { 0x00009a5c, 0x00008384, 0x00008384, 0x00008190, 0x00008190, 0x00008190 }, + { 0x00009a60, 0x00008388, 0x00008388, 0x00008194, 0x00008194, 0x00008194 }, + { 0x00009a64, 0x0000838c, 0x0000838c, 0x000081a0, 0x000081a0, 0x000081a0 }, + { 0x00009a68, 0x00008390, 0x00008390, 0x0000820c, 0x0000820c, 0x0000820c }, + { 0x00009a6c, 0x00008394, 0x00008394, 0x000081a8, 0x000081a8, 0x000081a8 }, + { 0x00009a70, 0x0000a380, 0x0000a380, 0x00008284, 0x00008284, 0x00008284 }, + { 0x00009a74, 0x0000a384, 0x0000a384, 0x00008288, 0x00008288, 0x00008288 }, + { 0x00009a78, 0x0000a388, 0x0000a388, 0x00008224, 0x00008224, 0x00008224 }, + { 0x00009a7c, 0x0000a38c, 0x0000a38c, 0x00008290, 0x00008290, 0x00008290 }, + { 0x00009a80, 0x0000a390, 0x0000a390, 0x00008300, 0x00008300, 0x00008300 }, + { 0x00009a84, 0x0000a394, 0x0000a394, 0x00008304, 0x00008304, 0x00008304 }, + { 0x00009a88, 0x0000a780, 0x0000a780, 0x00008308, 0x00008308, 0x00008308 }, + { 0x00009a8c, 0x0000a784, 0x0000a784, 0x0000830c, 0x0000830c, 0x0000830c }, + { 0x00009a90, 0x0000a788, 0x0000a788, 0x00008380, 0x00008380, 0x00008380 }, + { 0x00009a94, 0x0000a78c, 0x0000a78c, 0x00008384, 0x00008384, 0x00008384 }, + { 0x00009a98, 0x0000a790, 0x0000a790, 0x00008700, 0x00008700, 0x00008700 }, + { 0x00009a9c, 0x0000a794, 0x0000a794, 0x00008704, 0x00008704, 0x00008704 }, + { 0x00009aa0, 0x0000ab84, 0x0000ab84, 0x00008708, 0x00008708, 0x00008708 }, + { 0x00009aa4, 0x0000ab88, 0x0000ab88, 0x0000870c, 0x0000870c, 0x0000870c }, + { 0x00009aa8, 0x0000ab8c, 0x0000ab8c, 0x00008780, 0x00008780, 0x00008780 }, + { 0x00009aac, 0x0000ab90, 0x0000ab90, 0x00008784, 0x00008784, 0x00008784 }, + { 0x00009ab0, 0x0000ab94, 0x0000ab94, 0x00008b00, 0x00008b00, 0x00008b00 }, + { 0x00009ab4, 0x0000af80, 0x0000af80, 0x00008b04, 0x00008b04, 0x00008b04 }, + { 0x00009ab8, 0x0000af84, 0x0000af84, 0x00008b08, 0x00008b08, 0x00008b08 }, + { 0x00009abc, 0x0000af88, 0x0000af88, 0x00008b0c, 0x00008b0c, 0x00008b0c }, + { 0x00009ac0, 0x0000af8c, 0x0000af8c, 0x00008b80, 0x00008b80, 0x00008b80 }, + { 0x00009ac4, 0x0000af90, 0x0000af90, 0x00008b84, 0x00008b84, 0x00008b84 }, + { 0x00009ac8, 0x0000af94, 0x0000af94, 0x00008b88, 0x00008b88, 0x00008b88 }, + { 0x00009acc, 0x0000b380, 0x0000b380, 0x00008b8c, 0x00008b8c, 0x00008b8c }, + { 0x00009ad0, 0x0000b384, 0x0000b384, 0x00008b90, 0x00008b90, 0x00008b90 }, + { 0x00009ad4, 0x0000b388, 0x0000b388, 0x00008f80, 0x00008f80, 0x00008f80 }, + { 0x00009ad8, 0x0000b38c, 0x0000b38c, 0x00008f84, 0x00008f84, 0x00008f84 }, + { 0x00009adc, 0x0000b390, 0x0000b390, 0x00008f88, 0x00008f88, 0x00008f88 }, + { 0x00009ae0, 0x0000b394, 0x0000b394, 0x00008f8c, 0x00008f8c, 0x00008f8c }, + { 0x00009ae4, 0x0000b398, 0x0000b398, 0x00008f90, 0x00008f90, 0x00008f90 }, + { 0x00009ae8, 0x0000b780, 0x0000b780, 0x0000930c, 0x0000930c, 0x0000930c }, + { 0x00009aec, 0x0000b784, 0x0000b784, 0x00009310, 0x00009310, 0x00009310 }, + { 0x00009af0, 0x0000b788, 0x0000b788, 0x00009384, 0x00009384, 0x00009384 }, + { 0x00009af4, 0x0000b78c, 0x0000b78c, 0x00009388, 0x00009388, 0x00009388 }, + { 0x00009af8, 0x0000b790, 0x0000b790, 0x00009324, 0x00009324, 0x00009324 }, + { 0x00009afc, 0x0000b794, 0x0000b794, 0x00009704, 0x00009704, 0x00009704 }, + { 0x00009b00, 0x0000b798, 0x0000b798, 0x000096a4, 0x000096a4, 0x000096a4 }, + { 0x00009b04, 0x0000d784, 0x0000d784, 0x000096a8, 0x000096a8, 0x000096a8 }, + { 0x00009b08, 0x0000d788, 0x0000d788, 0x00009710, 0x00009710, 0x00009710 }, + { 0x00009b0c, 0x0000d78c, 0x0000d78c, 0x00009714, 0x00009714, 0x00009714 }, + { 0x00009b10, 0x0000d790, 0x0000d790, 0x00009720, 0x00009720, 0x00009720 }, + { 0x00009b14, 0x0000f780, 0x0000f780, 0x00009724, 0x00009724, 0x00009724 }, + { 0x00009b18, 0x0000f784, 0x0000f784, 0x00009728, 0x00009728, 0x00009728 }, + { 0x00009b1c, 0x0000f788, 0x0000f788, 0x0000972c, 0x0000972c, 0x0000972c }, + { 0x00009b20, 0x0000f78c, 0x0000f78c, 0x000097a0, 0x000097a0, 0x000097a0 }, + { 0x00009b24, 0x0000f790, 0x0000f790, 0x000097a4, 0x000097a4, 0x000097a4 }, + { 0x00009b28, 0x0000f794, 0x0000f794, 0x000097a8, 0x000097a8, 0x000097a8 }, + { 0x00009b2c, 0x0000f7a4, 0x0000f7a4, 0x000097b0, 0x000097b0, 0x000097b0 }, + { 0x00009b30, 0x0000f7a8, 0x0000f7a8, 0x000097b4, 0x000097b4, 0x000097b4 }, + { 0x00009b34, 0x0000f7ac, 0x0000f7ac, 0x000097b8, 0x000097b8, 0x000097b8 }, + { 0x00009b38, 0x0000f7b0, 0x0000f7b0, 0x000097a5, 0x000097a5, 0x000097a5 }, + { 0x00009b3c, 0x0000f7b4, 0x0000f7b4, 0x000097a9, 0x000097a9, 0x000097a9 }, + { 0x00009b40, 0x0000f7a1, 0x0000f7a1, 0x000097ad, 0x000097ad, 0x000097ad }, + { 0x00009b44, 0x0000f7a5, 0x0000f7a5, 0x000097b1, 0x000097b1, 0x000097b1 }, + { 0x00009b48, 0x0000f7a9, 0x0000f7a9, 0x000097b5, 0x000097b5, 0x000097b5 }, + { 0x00009b4c, 0x0000f7ad, 0x0000f7ad, 0x000097b9, 0x000097b9, 0x000097b9 }, + { 0x00009b50, 0x0000f7b1, 0x0000f7b1, 0x000097c5, 0x000097c5, 0x000097c5 }, + { 0x00009b54, 0x0000f7b5, 0x0000f7b5, 0x000097c9, 0x000097c9, 0x000097c9 }, + { 0x00009b58, 0x0000f7c5, 0x0000f7c5, 0x000097d1, 0x000097d1, 0x000097d1 }, + { 0x00009b5c, 0x0000f7c9, 0x0000f7c9, 0x000097d5, 0x000097d5, 0x000097d5 }, + { 0x00009b60, 0x0000f7cd, 0x0000f7cd, 0x000097d9, 0x000097d9, 0x000097d9 }, + { 0x00009b64, 0x0000f7d1, 0x0000f7d1, 0x000097c6, 0x000097c6, 0x000097c6 }, + { 0x00009b68, 0x0000f7d5, 0x0000f7d5, 0x000097ca, 0x000097ca, 0x000097ca }, + { 0x00009b6c, 0x0000f7c2, 0x0000f7c2, 0x000097ce, 0x000097ce, 0x000097ce }, + { 0x00009b70, 0x0000f7c6, 0x0000f7c6, 0x000097d2, 0x000097d2, 0x000097d2 }, + { 0x00009b74, 0x0000f7ca, 0x0000f7ca, 0x000097d6, 0x000097d6, 0x000097d6 }, + { 0x00009b78, 0x0000f7ce, 0x0000f7ce, 0x000097c3, 0x000097c3, 0x000097c3 }, + { 0x00009b7c, 0x0000f7d2, 0x0000f7d2, 0x000097c7, 0x000097c7, 0x000097c7 }, + { 0x00009b80, 0x0000f7d6, 0x0000f7d6, 0x000097cb, 0x000097cb, 0x000097cb }, + { 0x00009b84, 0x0000f7c3, 0x0000f7c3, 0x000097cf, 0x000097cf, 0x000097cf }, + { 0x00009b88, 0x0000f7c7, 0x0000f7c7, 0x000097d7, 0x000097d7, 0x000097d7 }, + { 0x00009b8c, 0x0000f7cb, 0x0000f7cb, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009b90, 0x0000f7d3, 0x0000f7d3, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009b94, 0x0000f7d7, 0x0000f7d7, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009b98, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009b9c, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009ba0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009ba4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009ba8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bac, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bb0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bb4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bb8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bbc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bc0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bc4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bc8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bcc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bd0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bd4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bd8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bdc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009be0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009be4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009be8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bec, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bf0, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bf4, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bf8, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009bfc, 0x0000f7db, 0x0000f7db, 0x000097db, 0x000097db, 0x000097db }, + { 0x00009848, 0x00001066, 0x00001066, 0x00001063, 0x00001063, 0x00001063 }, + { 0x0000a848, 0x00001066, 0x00001066, 0x00001063, 0x00001063, 0x00001063 }, +}; +static const u32 ar9280Modes_backoff_13db_rxgain_9280_2[][6] = { + { 0x00009a00, 0x00008184, 0x00008184, 0x00000290, 0x00000290, 0x00000290 }, + { 0x00009a04, 0x00008188, 0x00008188, 0x00000300, 0x00000300, 0x00000300 }, + { 0x00009a08, 0x0000818c, 0x0000818c, 0x00000304, 0x00000304, 0x00000304 }, + { 0x00009a0c, 0x00008190, 0x00008190, 0x00000308, 0x00000308, 0x00000308 }, + { 0x00009a10, 0x00008194, 0x00008194, 0x0000030c, 0x0000030c, 0x0000030c }, + { 0x00009a14, 0x00008200, 0x00008200, 0x00008000, 0x00008000, 0x00008000 }, + { 0x00009a18, 0x00008204, 0x00008204, 0x00008004, 0x00008004, 0x00008004 }, + { 0x00009a1c, 0x00008208, 0x00008208, 0x00008008, 0x00008008, 0x00008008 }, + { 0x00009a20, 0x0000820c, 0x0000820c, 0x0000800c, 0x0000800c, 0x0000800c }, + { 0x00009a24, 0x00008210, 0x00008210, 0x00008080, 0x00008080, 0x00008080 }, + { 0x00009a28, 0x00008214, 0x00008214, 0x00008084, 0x00008084, 0x00008084 }, + { 0x00009a2c, 0x00008280, 0x00008280, 0x00008088, 0x00008088, 0x00008088 }, + { 0x00009a30, 0x00008284, 0x00008284, 0x0000808c, 0x0000808c, 0x0000808c }, + { 0x00009a34, 0x00008288, 0x00008288, 0x00008100, 0x00008100, 0x00008100 }, + { 0x00009a38, 0x0000828c, 0x0000828c, 0x00008104, 0x00008104, 0x00008104 }, + { 0x00009a3c, 0x00008290, 0x00008290, 0x00008108, 0x00008108, 0x00008108 }, + { 0x00009a40, 0x00008300, 0x00008300, 0x0000810c, 0x0000810c, 0x0000810c }, + { 0x00009a44, 0x00008304, 0x00008304, 0x00008110, 0x00008110, 0x00008110 }, + { 0x00009a48, 0x00008308, 0x00008308, 0x00008114, 0x00008114, 0x00008114 }, + { 0x00009a4c, 0x0000830c, 0x0000830c, 0x00008180, 0x00008180, 0x00008180 }, + { 0x00009a50, 0x00008310, 0x00008310, 0x00008184, 0x00008184, 0x00008184 }, + { 0x00009a54, 0x00008314, 0x00008314, 0x00008188, 0x00008188, 0x00008188 }, + { 0x00009a58, 0x00008380, 0x00008380, 0x0000818c, 0x0000818c, 0x0000818c }, + { 0x00009a5c, 0x00008384, 0x00008384, 0x00008190, 0x00008190, 0x00008190 }, + { 0x00009a60, 0x00008388, 0x00008388, 0x00008194, 0x00008194, 0x00008194 }, + { 0x00009a64, 0x0000838c, 0x0000838c, 0x000081a0, 0x000081a0, 0x000081a0 }, + { 0x00009a68, 0x00008390, 0x00008390, 0x0000820c, 0x0000820c, 0x0000820c }, + { 0x00009a6c, 0x00008394, 0x00008394, 0x000081a8, 0x000081a8, 0x000081a8 }, + { 0x00009a70, 0x0000a380, 0x0000a380, 0x00008284, 0x00008284, 0x00008284 }, + { 0x00009a74, 0x0000a384, 0x0000a384, 0x00008288, 0x00008288, 0x00008288 }, + { 0x00009a78, 0x0000a388, 0x0000a388, 0x00008224, 0x00008224, 0x00008224 }, + { 0x00009a7c, 0x0000a38c, 0x0000a38c, 0x00008290, 0x00008290, 0x00008290 }, + { 0x00009a80, 0x0000a390, 0x0000a390, 0x00008300, 0x00008300, 0x00008300 }, + { 0x00009a84, 0x0000a394, 0x0000a394, 0x00008304, 0x00008304, 0x00008304 }, + { 0x00009a88, 0x0000a780, 0x0000a780, 0x00008308, 0x00008308, 0x00008308 }, + { 0x00009a8c, 0x0000a784, 0x0000a784, 0x0000830c, 0x0000830c, 0x0000830c }, + { 0x00009a90, 0x0000a788, 0x0000a788, 0x00008380, 0x00008380, 0x00008380 }, + { 0x00009a94, 0x0000a78c, 0x0000a78c, 0x00008384, 0x00008384, 0x00008384 }, + { 0x00009a98, 0x0000a790, 0x0000a790, 0x00008700, 0x00008700, 0x00008700 }, + { 0x00009a9c, 0x0000a794, 0x0000a794, 0x00008704, 0x00008704, 0x00008704 }, + { 0x00009aa0, 0x0000ab84, 0x0000ab84, 0x00008708, 0x00008708, 0x00008708 }, + { 0x00009aa4, 0x0000ab88, 0x0000ab88, 0x0000870c, 0x0000870c, 0x0000870c }, + { 0x00009aa8, 0x0000ab8c, 0x0000ab8c, 0x00008780, 0x00008780, 0x00008780 }, + { 0x00009aac, 0x0000ab90, 0x0000ab90, 0x00008784, 0x00008784, 0x00008784 }, + { 0x00009ab0, 0x0000ab94, 0x0000ab94, 0x00008b00, 0x00008b00, 0x00008b00 }, + { 0x00009ab4, 0x0000af80, 0x0000af80, 0x00008b04, 0x00008b04, 0x00008b04 }, + { 0x00009ab8, 0x0000af84, 0x0000af84, 0x00008b08, 0x00008b08, 0x00008b08 }, + { 0x00009abc, 0x0000af88, 0x0000af88, 0x00008b0c, 0x00008b0c, 0x00008b0c }, + { 0x00009ac0, 0x0000af8c, 0x0000af8c, 0x00008b80, 0x00008b80, 0x00008b80 }, + { 0x00009ac4, 0x0000af90, 0x0000af90, 0x00008b84, 0x00008b84, 0x00008b84 }, + { 0x00009ac8, 0x0000af94, 0x0000af94, 0x00008b88, 0x00008b88, 0x00008b88 }, + { 0x00009acc, 0x0000b380, 0x0000b380, 0x00008b8c, 0x00008b8c, 0x00008b8c }, + { 0x00009ad0, 0x0000b384, 0x0000b384, 0x00008b90, 0x00008b90, 0x00008b90 }, + { 0x00009ad4, 0x0000b388, 0x0000b388, 0x00008f80, 0x00008f80, 0x00008f80 }, + { 0x00009ad8, 0x0000b38c, 0x0000b38c, 0x00008f84, 0x00008f84, 0x00008f84 }, + { 0x00009adc, 0x0000b390, 0x0000b390, 0x00008f88, 0x00008f88, 0x00008f88 }, + { 0x00009ae0, 0x0000b394, 0x0000b394, 0x00008f8c, 0x00008f8c, 0x00008f8c }, + { 0x00009ae4, 0x0000b398, 0x0000b398, 0x00008f90, 0x00008f90, 0x00008f90 }, + { 0x00009ae8, 0x0000b780, 0x0000b780, 0x00009310, 0x00009310, 0x00009310 }, + { 0x00009aec, 0x0000b784, 0x0000b784, 0x00009314, 0x00009314, 0x00009314 }, + { 0x00009af0, 0x0000b788, 0x0000b788, 0x00009320, 0x00009320, 0x00009320 }, + { 0x00009af4, 0x0000b78c, 0x0000b78c, 0x00009324, 0x00009324, 0x00009324 }, + { 0x00009af8, 0x0000b790, 0x0000b790, 0x00009328, 0x00009328, 0x00009328 }, + { 0x00009afc, 0x0000b794, 0x0000b794, 0x0000932c, 0x0000932c, 0x0000932c }, + { 0x00009b00, 0x0000b798, 0x0000b798, 0x00009330, 0x00009330, 0x00009330 }, + { 0x00009b04, 0x0000d784, 0x0000d784, 0x00009334, 0x00009334, 0x00009334 }, + { 0x00009b08, 0x0000d788, 0x0000d788, 0x00009321, 0x00009321, 0x00009321 }, + { 0x00009b0c, 0x0000d78c, 0x0000d78c, 0x00009325, 0x00009325, 0x00009325 }, + { 0x00009b10, 0x0000d790, 0x0000d790, 0x00009329, 0x00009329, 0x00009329 }, + { 0x00009b14, 0x0000f780, 0x0000f780, 0x0000932d, 0x0000932d, 0x0000932d }, + { 0x00009b18, 0x0000f784, 0x0000f784, 0x00009331, 0x00009331, 0x00009331 }, + { 0x00009b1c, 0x0000f788, 0x0000f788, 0x00009335, 0x00009335, 0x00009335 }, + { 0x00009b20, 0x0000f78c, 0x0000f78c, 0x00009322, 0x00009322, 0x00009322 }, + { 0x00009b24, 0x0000f790, 0x0000f790, 0x00009326, 0x00009326, 0x00009326 }, + { 0x00009b28, 0x0000f794, 0x0000f794, 0x0000932a, 0x0000932a, 0x0000932a }, + { 0x00009b2c, 0x0000f7a4, 0x0000f7a4, 0x0000932e, 0x0000932e, 0x0000932e }, + { 0x00009b30, 0x0000f7a8, 0x0000f7a8, 0x00009332, 0x00009332, 0x00009332 }, + { 0x00009b34, 0x0000f7ac, 0x0000f7ac, 0x00009336, 0x00009336, 0x00009336 }, + { 0x00009b38, 0x0000f7b0, 0x0000f7b0, 0x00009323, 0x00009323, 0x00009323 }, + { 0x00009b3c, 0x0000f7b4, 0x0000f7b4, 0x00009327, 0x00009327, 0x00009327 }, + { 0x00009b40, 0x0000f7a1, 0x0000f7a1, 0x0000932b, 0x0000932b, 0x0000932b }, + { 0x00009b44, 0x0000f7a5, 0x0000f7a5, 0x0000932f, 0x0000932f, 0x0000932f }, + { 0x00009b48, 0x0000f7a9, 0x0000f7a9, 0x00009333, 0x00009333, 0x00009333 }, + { 0x00009b4c, 0x0000f7ad, 0x0000f7ad, 0x00009337, 0x00009337, 0x00009337 }, + { 0x00009b50, 0x0000f7b1, 0x0000f7b1, 0x00009343, 0x00009343, 0x00009343 }, + { 0x00009b54, 0x0000f7b5, 0x0000f7b5, 0x00009347, 0x00009347, 0x00009347 }, + { 0x00009b58, 0x0000f7c5, 0x0000f7c5, 0x0000934b, 0x0000934b, 0x0000934b }, + { 0x00009b5c, 0x0000f7c9, 0x0000f7c9, 0x0000934f, 0x0000934f, 0x0000934f }, + { 0x00009b60, 0x0000f7cd, 0x0000f7cd, 0x00009353, 0x00009353, 0x00009353 }, + { 0x00009b64, 0x0000f7d1, 0x0000f7d1, 0x00009357, 0x00009357, 0x00009357 }, + { 0x00009b68, 0x0000f7d5, 0x0000f7d5, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b6c, 0x0000f7c2, 0x0000f7c2, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b70, 0x0000f7c6, 0x0000f7c6, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b74, 0x0000f7ca, 0x0000f7ca, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b78, 0x0000f7ce, 0x0000f7ce, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b7c, 0x0000f7d2, 0x0000f7d2, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b80, 0x0000f7d6, 0x0000f7d6, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b84, 0x0000f7c3, 0x0000f7c3, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b88, 0x0000f7c7, 0x0000f7c7, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b8c, 0x0000f7cb, 0x0000f7cb, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b90, 0x0000f7d3, 0x0000f7d3, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b94, 0x0000f7d7, 0x0000f7d7, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b98, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009b9c, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009ba0, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009ba4, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009ba8, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bac, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bb0, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bb4, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bb8, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bbc, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bc0, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bc4, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bc8, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bcc, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bd0, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bd4, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bd8, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bdc, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009be0, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009be4, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009be8, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bec, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bf0, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bf4, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bf8, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009bfc, 0x0000f7db, 0x0000f7db, 0x0000935b, 0x0000935b, 0x0000935b }, + { 0x00009848, 0x00001066, 0x00001066, 0x0000105a, 0x0000105a, 0x0000105a }, + { 0x0000a848, 0x00001066, 0x00001066, 0x0000105a, 0x0000105a, 0x0000105a }, +}; + +static const u32 ar9280Modes_high_power_tx_gain_9280_2[][6] = { + { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, + { 0x0000a304, 0x00003002, 0x00003002, 0x00004002, 0x00004002, 0x00004002 }, + { 0x0000a308, 0x00006004, 0x00006004, 0x00007008, 0x00007008, 0x00007008 }, + { 0x0000a30c, 0x0000a006, 0x0000a006, 0x0000c010, 0x0000c010, 0x0000c010 }, + { 0x0000a310, 0x0000e012, 0x0000e012, 0x00010012, 0x00010012, 0x00010012 }, + { 0x0000a314, 0x00011014, 0x00011014, 0x00013014, 0x00013014, 0x00013014 }, + { 0x0000a318, 0x0001504a, 0x0001504a, 0x0001820a, 0x0001820a, 0x0001820a }, + { 0x0000a31c, 0x0001904c, 0x0001904c, 0x0001b211, 0x0001b211, 0x0001b211 }, + { 0x0000a320, 0x0001c04e, 0x0001c04e, 0x0001e213, 0x0001e213, 0x0001e213 }, + { 0x0000a324, 0x00020092, 0x00020092, 0x00022411, 0x00022411, 0x00022411 }, + { 0x0000a328, 0x0002410a, 0x0002410a, 0x00025413, 0x00025413, 0x00025413 }, + { 0x0000a32c, 0x0002710c, 0x0002710c, 0x00029811, 0x00029811, 0x00029811 }, + { 0x0000a330, 0x0002b18b, 0x0002b18b, 0x0002c813, 0x0002c813, 0x0002c813 }, + { 0x0000a334, 0x0002e1cc, 0x0002e1cc, 0x00030a14, 0x00030a14, 0x00030a14 }, + { 0x0000a338, 0x000321ec, 0x000321ec, 0x00035a50, 0x00035a50, 0x00035a50 }, + { 0x0000a33c, 0x000321ec, 0x000321ec, 0x00039c4c, 0x00039c4c, 0x00039c4c }, + { 0x0000a340, 0x000321ec, 0x000321ec, 0x0003de8a, 0x0003de8a, 0x0003de8a }, + { 0x0000a344, 0x000321ec, 0x000321ec, 0x00042e92, 0x00042e92, 0x00042e92 }, + { 0x0000a348, 0x000321ec, 0x000321ec, 0x00046ed2, 0x00046ed2, 0x00046ed2 }, + { 0x0000a34c, 0x000321ec, 0x000321ec, 0x0004bed5, 0x0004bed5, 0x0004bed5 }, + { 0x0000a350, 0x000321ec, 0x000321ec, 0x0004ff54, 0x0004ff54, 0x0004ff54 }, + { 0x0000a354, 0x000321ec, 0x000321ec, 0x00053fd5, 0x00053fd5, 0x00053fd5 }, + { 0x00007814, 0x00198eff, 0x00198eff, 0x00198eff, 0x00198eff, 0x00198eff }, + { 0x00007838, 0x00198eff, 0x00198eff, 0x00198eff, 0x00198eff, 0x00198eff }, + { 0x0000a27c, 0x050739ce, 0x050739ce, 0x050739ce, 0x050739ce, 0x050739ce }, +}; + +static const u32 ar9280Modes_original_tx_gain_9280_2[][6] = { + { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, + { 0x0000a304, 0x00003002, 0x00003002, 0x00003002, 0x00003002, 0x00003002 }, + { 0x0000a308, 0x00006004, 0x00006004, 0x00008009, 0x00008009, 0x00008009 }, + { 0x0000a30c, 0x0000a006, 0x0000a006, 0x0000b00b, 0x0000b00b, 0x0000b00b }, + { 0x0000a310, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012, 0x0000e012 }, + { 0x0000a314, 0x00011014, 0x00011014, 0x00012048, 0x00012048, 0x00012048 }, + { 0x0000a318, 0x0001504a, 0x0001504a, 0x0001604a, 0x0001604a, 0x0001604a }, + { 0x0000a31c, 0x0001904c, 0x0001904c, 0x0001a211, 0x0001a211, 0x0001a211 }, + { 0x0000a320, 0x0001c04e, 0x0001c04e, 0x0001e213, 0x0001e213, 0x0001e213 }, + { 0x0000a324, 0x00020092, 0x00020092, 0x0002121b, 0x0002121b, 0x0002121b }, + { 0x0000a328, 0x0002410a, 0x0002410a, 0x00024412, 0x00024412, 0x00024412 }, + { 0x0000a32c, 0x0002710c, 0x0002710c, 0x00028414, 0x00028414, 0x00028414 }, + { 0x0000a330, 0x0002b18b, 0x0002b18b, 0x0002b44a, 0x0002b44a, 0x0002b44a }, + { 0x0000a334, 0x0002e1cc, 0x0002e1cc, 0x00030649, 0x00030649, 0x00030649 }, + { 0x0000a338, 0x000321ec, 0x000321ec, 0x0003364b, 0x0003364b, 0x0003364b }, + { 0x0000a33c, 0x000321ec, 0x000321ec, 0x00038a49, 0x00038a49, 0x00038a49 }, + { 0x0000a340, 0x000321ec, 0x000321ec, 0x0003be48, 0x0003be48, 0x0003be48 }, + { 0x0000a344, 0x000321ec, 0x000321ec, 0x0003ee4a, 0x0003ee4a, 0x0003ee4a }, + { 0x0000a348, 0x000321ec, 0x000321ec, 0x00042e88, 0x00042e88, 0x00042e88 }, + { 0x0000a34c, 0x000321ec, 0x000321ec, 0x00046e8a, 0x00046e8a, 0x00046e8a }, + { 0x0000a350, 0x000321ec, 0x000321ec, 0x00049ec9, 0x00049ec9, 0x00049ec9 }, + { 0x0000a354, 0x000321ec, 0x000321ec, 0x0004bf42, 0x0004bf42, 0x0004bf42 }, + { 0x00007814, 0x0019beff, 0x0019beff, 0x0019beff, 0x0019beff, 0x0019beff }, + { 0x00007838, 0x0019beff, 0x0019beff, 0x0019beff, 0x0019beff, 0x0019beff }, + { 0x0000a27c, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce }, +}; static const u32 ar9280PciePhy_clkreq_off_L1_9280[][2] = { {0x00004040, 0x9248fd00 }, @@ -3123,23 +3418,21 @@ static const u32 ar9280PciePhy_clkreq_off_L1_9280[][2] = { {0x00004040, 0xa8000019 }, {0x00004040, 0x13160820 }, {0x00004040, 0xe5980560 }, - {0x00004040, 0x401dcffc }, - {0x00004040, 0x1aaabe40 }, + {0x00004040, 0xc01dcffc }, + {0x00004040, 0x1aaabe41 }, {0x00004040, 0xbe105554 }, {0x00004040, 0x00043007 }, {0x00004044, 0x00000000 }, }; - - static const u32 ar9280PciePhy_clkreq_always_on_L1_9280[][2] = { {0x00004040, 0x9248fd00 }, {0x00004040, 0x24924924 }, {0x00004040, 0xa8000019 }, {0x00004040, 0x13160820 }, {0x00004040, 0xe5980560 }, - {0x00004040, 0x401dcffd }, - {0x00004040, 0x1aaabe40 }, + {0x00004040, 0xc01dcffd }, + {0x00004040, 0x1aaabe41 }, {0x00004040, 0xbe105554 }, {0x00004040, 0x00043007 }, {0x00004044, 0x00000000 }, -- cgit v1.2.2 From f9bbf431beb7dd98b94fa965dab851432be4b762 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Thu, 13 Nov 2008 17:59:36 +0530 Subject: ath9k: incorrect noise floor threshold values. This patch fixes incorrect noise floor threshold values. Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/calib.c | 4 ++-- drivers/net/wireless/ath9k/eeprom.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath9k/calib.c b/drivers/net/wireless/ath9k/calib.c index 1690759fe7b8..0e214f746a96 100644 --- a/drivers/net/wireless/ath9k/calib.c +++ b/drivers/net/wireless/ath9k/calib.c @@ -176,14 +176,14 @@ static bool getNoiseFloorThresh(struct ath_hal *ah, case CHANNEL_A_HT20: case CHANNEL_A_HT40PLUS: case CHANNEL_A_HT40MINUS: - *nft = (int16_t)ath9k_hw_get_eeprom(ah, EEP_NFTHRESH_5); + *nft = (int8_t)ath9k_hw_get_eeprom(ah, EEP_NFTHRESH_5); break; case CHANNEL_B: case CHANNEL_G: case CHANNEL_G_HT20: case CHANNEL_G_HT40PLUS: case CHANNEL_G_HT40MINUS: - *nft = (int16_t)ath9k_hw_get_eeprom(ah, EEP_NFTHRESH_2); + *nft = (int8_t)ath9k_hw_get_eeprom(ah, EEP_NFTHRESH_2); break; default: DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL, diff --git a/drivers/net/wireless/ath9k/eeprom.c b/drivers/net/wireless/ath9k/eeprom.c index 9b2fdc538a8d..180e54114659 100644 --- a/drivers/net/wireless/ath9k/eeprom.c +++ b/drivers/net/wireless/ath9k/eeprom.c @@ -1551,9 +1551,9 @@ u32 ath9k_hw_get_eeprom(struct ath_hal *ah, switch (param) { case EEP_NFTHRESH_5: - return -pModal[0].noiseFloorThreshCh[0]; + return pModal[0].noiseFloorThreshCh[0]; case EEP_NFTHRESH_2: - return -pModal[1].noiseFloorThreshCh[0]; + return pModal[1].noiseFloorThreshCh[0]; case AR_EEPROM_MAC(0): return pBase->macAddr[0] << 8 | pBase->macAddr[1]; case AR_EEPROM_MAC(1): -- cgit v1.2.2 From e97275cb062cf927cdb086f0107657dd92160801 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Thu, 13 Nov 2008 18:00:02 +0530 Subject: ath9k: Build RFKILL feature even when RFKILL subsystem is a MODULE Currently, ath9k builds RFKILL feature only when the RFKILL subsystem is built part of the kernel. Build RFKILL feature regardless of whether RFKILL subsystem is built as a MODULE or part of the kernel. Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/ath9k.h | 2 +- drivers/net/wireless/ath9k/core.c | 2 +- drivers/net/wireless/ath9k/hw.c | 6 +++--- drivers/net/wireless/ath9k/main.c | 12 ++++++------ 4 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h index 3a180ce1770b..6be2b947307c 100644 --- a/drivers/net/wireless/ath9k/ath9k.h +++ b/drivers/net/wireless/ath9k/ath9k.h @@ -904,7 +904,7 @@ u32 ath9k_hw_gpio_get(struct ath_hal *ah, u32 gpio); void ath9k_hw_cfg_output(struct ath_hal *ah, u32 gpio, u32 ah_signal_type); void ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio, u32 val); -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) void ath9k_enable_rfkill(struct ath_hal *ah); #endif int ath9k_hw_select_antconfig(struct ath_hal *ah, u32 cfg); diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c index 5f5184acb274..3e94dab6c9d9 100644 --- a/drivers/net/wireless/ath9k/core.c +++ b/drivers/net/wireless/ath9k/core.c @@ -705,7 +705,7 @@ void ath_stop(struct ath_softc *sc) } else sc->sc_rxlink = NULL; -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); #endif diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c index efeef2ca5350..82c2a4259ce4 100644 --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c @@ -2340,7 +2340,7 @@ bool ath9k_hw_reset(struct ath_hal *ah, struct ath9k_channel *chan, ath9k_hw_init_interrupt_masks(ah, ah->ah_opmode); ath9k_hw_init_qos(ah); -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) ath9k_enable_rfkill(ah); #endif @@ -3515,7 +3515,7 @@ bool ath9k_hw_fill_cap_info(struct ath_hal *ah) pCap->hw_caps |= ATH9K_HW_CAP_ENHANCEDPM; -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) ah->ah_rfsilent = ath9k_hw_get_eeprom(ah, EEP_RF_SILENT); if (ah->ah_rfsilent & EEP_RFSILENT_ENABLED) { ah->ah_rfkill_gpio = @@ -3772,7 +3772,7 @@ void ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio, u32 val) AR_GPIO_BIT(gpio)); } -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) void ath9k_enable_rfkill(struct ath_hal *ah) { REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index fbb2dd2373c8..ce94edee71d1 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -594,7 +594,7 @@ fail: ath_deinit_leds(sc); } -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) /*******************/ /* Rfkill */ @@ -838,7 +838,7 @@ static void ath_detach(struct ath_softc *sc) ath_deinit_leds(sc); -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) ath_deinit_rfkill(sc); #endif ath_rate_control_unregister(); @@ -921,7 +921,7 @@ static int ath_attach(u16 devid, struct ath_softc *sc) /* Initialize LED control */ ath_init_leds(sc); -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) /* Initialze h/w Rfkill */ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll); @@ -978,7 +978,7 @@ static int ath9k_start(struct ieee80211_hw *hw) goto exit; } -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) error = ath_start_rfkill_poll(sc); #endif @@ -1722,7 +1722,7 @@ static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); #endif @@ -1759,7 +1759,7 @@ static int ath_pci_resume(struct pci_dev *pdev) AR_GPIO_OUTPUT_MUX_AS_OUTPUT); ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); -#ifdef CONFIG_RFKILL +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) /* * check the h/w rfkill state on resume * and start the rfkill poll timer -- cgit v1.2.2 From 306efdd109f086b19d849f1ec0f9104c9fdb3444 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Thu, 13 Nov 2008 18:00:37 +0530 Subject: ath9k: IRQ should be disabled before calling free_irq() ath9k frees irq even before IRQs are disabled and existing IRQs are flushed when rfkill_register() fails. Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index ce94edee71d1..1ebf60627f77 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -810,9 +810,9 @@ static int ath_start_rfkill_poll(struct ath_softc *sc) rfkill_free(sc->rf_kill.rfkill); /* Deinitialize the device */ + ath_detach(sc); if (sc->pdev->irq) free_irq(sc->pdev->irq, sc); - ath_detach(sc); pci_iounmap(sc->pdev, sc->mem); pci_release_region(sc->pdev, 0); pci_disable_device(sc->pdev); -- cgit v1.2.2 From db93e7b5bf9dea9175d5b213f9557758c56abbfc Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Thu, 13 Nov 2008 18:01:08 +0530 Subject: ath9k: Race condition in accessing TX and RX buffers. Race condition causes RX buffers to be accessed even before it is initialized. The RX and TX buffers are initialized immediately after the hardware is registered with mac80211. The mac80211 start callback is ready to be fired once the device is registered for a case when the wpa_supplicant is also running at the same time. The same race condition is also possible for RKFILL registration as RFKILL init happens after the device registration with mac80211 and it is possible that rfkill_register would be called even before it is initialized. Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/main.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 1ebf60627f77..c928db9dc0f0 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -912,14 +912,14 @@ static int ath_attach(u16 devid, struct ath_softc *sc) hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &sc->sbands[IEEE80211_BAND_5GHZ]; - error = ieee80211_register_hw(hw); - if (error != 0) { - ath_rate_control_unregister(); - goto bad; - } + /* initialize tx/rx engine */ + error = ath_tx_init(sc, ATH_TXBUF); + if (error != 0) + goto detach; - /* Initialize LED control */ - ath_init_leds(sc); + error = ath_rx_init(sc, ATH_RXBUF); + if (error != 0) + goto detach; #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) /* Initialze h/w Rfkill */ @@ -931,15 +931,14 @@ static int ath_attach(u16 devid, struct ath_softc *sc) goto detach; #endif - /* initialize tx/rx engine */ - - error = ath_tx_init(sc, ATH_TXBUF); - if (error != 0) - goto detach; + error = ieee80211_register_hw(hw); + if (error != 0) { + ath_rate_control_unregister(); + goto bad; + } - error = ath_rx_init(sc, ATH_RXBUF); - if (error != 0) - goto detach; + /* Initialize LED control */ + ath_init_leds(sc); return 0; detach: -- cgit v1.2.2 From 54ac218ae676931813169e0ca074aca2e4adee38 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Thu, 13 Nov 2008 10:39:14 -0500 Subject: rtl8187: fix 8187B throughput regression Hin-Tak Leung reported that after the change "rtl8187: add short slot handling for 8187B" his RTL8187B started to give low throughput on network transfers. Turns out that the SIFS setting used isn't ok, it doesn't look to be the real aSIFSTime, using the "magical" 0x22 value like on other 818x variants as the vendor does too fixes the issue. Tested-by: Larry Finger Tested-by: Hin-Tak Leung Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 4a9f76f46f77..5fe7473124e8 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -935,7 +935,7 @@ static void rtl8187_conf_erp(struct rtl8187_priv *priv, bool use_short_slot, difs = 0x32; eifs = 0x5b; } - rtl818x_iowrite8(priv, &priv->map->SIFS, 0xa); + rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22); rtl818x_iowrite8(priv, &priv->map->SLOT, slot_time); rtl818x_iowrite8(priv, &priv->map->DIFS, difs); -- cgit v1.2.2 From b4572a9264312fecdb530a3416b8c8336a3bb9a9 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Thu, 13 Nov 2008 10:39:15 -0500 Subject: rtl8187: implement conf_tx callback to configure tx queues Add conf_tx callback and use it to configure tx queues of 8187L/8187B. Tested-by: Larry Finger Tested-by: Hin-Tak Leung Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187.h | 2 + drivers/net/wireless/rtl818x/rtl8187_dev.c | 73 +++++++++++++++++++++++--- drivers/net/wireless/rtl818x/rtl8187_rtl8225.c | 6 --- 3 files changed, 69 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h index 33725d0978b3..f09872eec3d5 100644 --- a/drivers/net/wireless/rtl818x/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187.h @@ -111,6 +111,8 @@ struct rtl8187_priv { u8 signal; u8 quality; u8 noise; + u8 slot_time; + u8 aifsn[4]; }; void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 5fe7473124e8..cb5bcefd1c3e 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -712,6 +712,13 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev) rtl818x_iowrite16_idx(priv, (__le16 *)0xFFEC, 0x0800, 1); + priv->slot_time = 0x9; + priv->aifsn[0] = 2; /* AIFSN[AC_VO] */ + priv->aifsn[1] = 2; /* AIFSN[AC_VI] */ + priv->aifsn[2] = 7; /* AIFSN[AC_BK] */ + priv->aifsn[3] = 3; /* AIFSN[AC_BE] */ + rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0); + return 0; } @@ -919,24 +926,38 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev, return 0; } +/* + * With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for + * example. Thus we have to use raw values for AC_*_PARAM register addresses. + */ +static __le32 *rtl8187b_ac_addr[4] = { + (__le32 *) 0xFFF0, /* AC_VO */ + (__le32 *) 0xFFF4, /* AC_VI */ + (__le32 *) 0xFFFC, /* AC_BK */ + (__le32 *) 0xFFF8, /* AC_BE */ +}; + +#define SIFS_TIME 0xa + static void rtl8187_conf_erp(struct rtl8187_priv *priv, bool use_short_slot, bool use_short_preamble) { if (priv->is_rtl8187b) { - u8 difs, eifs, slot_time; + u8 difs, eifs; u16 ack_timeout; + int queue; if (use_short_slot) { - slot_time = 0x9; + priv->slot_time = 0x9; difs = 0x1c; eifs = 0x53; } else { - slot_time = 0x14; + priv->slot_time = 0x14; difs = 0x32; eifs = 0x5b; } rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22); - rtl818x_iowrite8(priv, &priv->map->SLOT, slot_time); + rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time); rtl818x_iowrite8(priv, &priv->map->DIFS, difs); /* @@ -957,18 +978,21 @@ static void rtl8187_conf_erp(struct rtl8187_priv *priv, bool use_short_slot, ack_timeout += 144; rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, DIV_ROUND_UP(ack_timeout, 4)); + + for (queue = 0; queue < 4; queue++) + rtl818x_iowrite8(priv, (u8 *) rtl8187b_ac_addr[queue], + priv->aifsn[queue] * priv->slot_time + + SIFS_TIME); } else { rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22); if (use_short_slot) { rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9); rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14); rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14); - rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73); } else { rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14); rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24); rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24); - rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5); } } } @@ -1017,6 +1041,42 @@ static void rtl8187_configure_filter(struct ieee80211_hw *dev, rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf); } +static int rtl8187_conf_tx(struct ieee80211_hw *dev, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct rtl8187_priv *priv = dev->priv; + u8 cw_min, cw_max; + + if (queue > 3) + return -EINVAL; + + cw_min = fls(params->cw_min); + cw_max = fls(params->cw_max); + + if (priv->is_rtl8187b) { + priv->aifsn[queue] = params->aifs; + + /* + * This is the structure of AC_*_PARAM registers in 8187B: + * - TXOP limit field, bit offset = 16 + * - ECWmax, bit offset = 12 + * - ECWmin, bit offset = 8 + * - AIFS, bit offset = 0 + */ + rtl818x_iowrite32(priv, rtl8187b_ac_addr[queue], + (params->txop << 16) | (cw_max << 12) | + (cw_min << 8) | (params->aifs * + priv->slot_time + SIFS_TIME)); + } else { + if (queue != 0) + return -EINVAL; + + rtl818x_iowrite8(priv, &priv->map->CW_VAL, + cw_min | (cw_max << 4)); + } + return 0; +} + static const struct ieee80211_ops rtl8187_ops = { .tx = rtl8187_tx, .start = rtl8187_start, @@ -1027,6 +1087,7 @@ static const struct ieee80211_ops rtl8187_ops = { .config_interface = rtl8187_config_interface, .bss_info_changed = rtl8187_bss_info_changed, .configure_filter = rtl8187_configure_filter, + .conf_tx = rtl8187_conf_tx }; static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom) diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c index 69030be62b36..4e75e8e7fa90 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c @@ -878,12 +878,6 @@ static void rtl8225z2_b_rf_init(struct ieee80211_hw *dev) for (i = 0; i < ARRAY_SIZE(rtl8225z2_ofdm); i++) rtl8225_write_phy_ofdm(dev, i, rtl8225z2_ofdm[i]); - rtl818x_iowrite32(priv, (__le32 *)0xFFF0, (7 << 12) | (3 << 8) | 28); - rtl818x_iowrite32(priv, (__le32 *)0xFFF4, (7 << 12) | (3 << 8) | 28); - rtl818x_iowrite32(priv, (__le32 *)0xFFF8, (7 << 12) | (3 << 8) | 28); - rtl818x_iowrite32(priv, (__le32 *)0xFFFC, (7 << 12) | (3 << 8) | 28); - rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0); - rtl8225_write_phy_ofdm(dev, 0x97, 0x46); rtl8225_write_phy_ofdm(dev, 0xa4, 0xb6); rtl8225_write_phy_ofdm(dev, 0x85, 0xfc); -- cgit v1.2.2 From 3517afdefc3ad335b276eb5f8691841f48097abf Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Thu, 13 Nov 2008 10:39:16 -0500 Subject: rtl8187: feedback transmitted packets using tx close descriptor for 8187B Realtek 8187B has a receive command queue to feedback beacon interrupt and transmitted packet status. Use it to feedback mac80211 about status of transmitted packets. Unfortunately in the course of testing I found that the sequence number reported by hardware includes entire sequence control in a 12 bit only field, so a workaround is done to check only lowest bits. Tested-by: Larry Finger Tested-by: Hin-Tak Leung Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187.h | 5 ++ drivers/net/wireless/rtl818x/rtl8187_dev.c | 135 ++++++++++++++++++++++++++++- 2 files changed, 136 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h index f09872eec3d5..c385407a9941 100644 --- a/drivers/net/wireless/rtl818x/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187.h @@ -113,6 +113,11 @@ struct rtl8187_priv { u8 noise; u8 slot_time; u8 aifsn[4]; + struct { + __le64 buf; + struct urb *urb; + struct sk_buff_head queue; + } b_tx_status; }; void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index cb5bcefd1c3e..876d4f93d310 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -176,8 +176,27 @@ static void rtl8187_tx_cb(struct urb *urb) skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) : sizeof(struct rtl8187_tx_hdr)); ieee80211_tx_info_clear_status(info); - info->flags |= IEEE80211_TX_STAT_ACK; - ieee80211_tx_status_irqsafe(hw, skb); + + if (!urb->status && + !(info->flags & IEEE80211_TX_CTL_NO_ACK) && + priv->is_rtl8187b) { + skb_queue_tail(&priv->b_tx_status.queue, skb); + + /* queue is "full", discard last items */ + while (skb_queue_len(&priv->b_tx_status.queue) > 5) { + struct sk_buff *old_skb; + + dev_dbg(&priv->udev->dev, + "transmit status queue full\n"); + + old_skb = skb_dequeue(&priv->b_tx_status.queue); + ieee80211_tx_status_irqsafe(hw, old_skb); + } + } else { + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !urb->status) + info->flags |= IEEE80211_TX_STAT_ACK; + ieee80211_tx_status_irqsafe(hw, skb); + } } static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) @@ -219,7 +238,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) hdr->flags = cpu_to_le32(flags); hdr->len = 0; hdr->rts_duration = rts_dur; - hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); + hdr->retry = cpu_to_le32(info->control.rates[0].count << 8); buf = hdr; ep = 2; @@ -237,7 +256,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) memset(hdr, 0, sizeof(*hdr)); hdr->flags = cpu_to_le32(flags); hdr->rts_duration = rts_dur; - hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); + hdr->retry = cpu_to_le32(info->control.rates[0].count << 8); hdr->tx_duration = ieee80211_generic_frame_duration(dev, priv->vif, skb->len, txrate); @@ -403,6 +422,109 @@ static int rtl8187_init_urbs(struct ieee80211_hw *dev) return 0; } +static void rtl8187b_status_cb(struct urb *urb) +{ + struct ieee80211_hw *hw = (struct ieee80211_hw *)urb->context; + struct rtl8187_priv *priv = hw->priv; + u64 val; + unsigned int cmd_type; + + if (unlikely(urb->status)) { + usb_free_urb(urb); + return; + } + + /* + * Read from status buffer: + * + * bits [30:31] = cmd type: + * - 0 indicates tx beacon interrupt + * - 1 indicates tx close descriptor + * + * In the case of tx beacon interrupt: + * [0:9] = Last Beacon CW + * [10:29] = reserved + * [30:31] = 00b + * [32:63] = Last Beacon TSF + * + * If it's tx close descriptor: + * [0:7] = Packet Retry Count + * [8:14] = RTS Retry Count + * [15] = TOK + * [16:27] = Sequence No + * [28] = LS + * [29] = FS + * [30:31] = 01b + * [32:47] = unused (reserved?) + * [48:63] = MAC Used Time + */ + val = le64_to_cpu(priv->b_tx_status.buf); + + cmd_type = (val >> 30) & 0x3; + if (cmd_type == 1) { + unsigned int pkt_rc, seq_no; + bool tok; + struct sk_buff *skb; + struct ieee80211_hdr *ieee80211hdr; + unsigned long flags; + + pkt_rc = val & 0xFF; + tok = val & (1 << 15); + seq_no = (val >> 16) & 0xFFF; + + spin_lock_irqsave(&priv->b_tx_status.queue.lock, flags); + skb_queue_reverse_walk(&priv->b_tx_status.queue, skb) { + ieee80211hdr = (struct ieee80211_hdr *)skb->data; + + /* + * While testing, it was discovered that the seq_no + * doesn't actually contains the sequence number. + * Instead of returning just the 12 bits of sequence + * number, hardware is returning entire sequence control + * (fragment number plus sequence number) in a 12 bit + * only field overflowing after some time. As a + * workaround, just consider the lower bits, and expect + * it's unlikely we wrongly ack some sent data + */ + if ((le16_to_cpu(ieee80211hdr->seq_ctrl) + & 0xFFF) == seq_no) + break; + } + if (skb != (struct sk_buff *) &priv->b_tx_status.queue) { + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + __skb_unlink(skb, &priv->b_tx_status.queue); + if (tok) + info->flags |= IEEE80211_TX_STAT_ACK; + info->status.rates[0].count = pkt_rc; + + ieee80211_tx_status_irqsafe(hw, skb); + } + spin_unlock_irqrestore(&priv->b_tx_status.queue.lock, flags); + } + + usb_submit_urb(urb, GFP_ATOMIC); +} + +static int rtl8187b_init_status_urb(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + struct urb *entry; + + entry = usb_alloc_urb(0, GFP_KERNEL); + if (!entry) + return -ENOMEM; + priv->b_tx_status.urb = entry; + + usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, 9), + &priv->b_tx_status.buf, sizeof(priv->b_tx_status.buf), + rtl8187b_status_cb, dev); + + usb_submit_urb(entry, GFP_KERNEL); + + return 0; +} + static int rtl8187_cmd_reset(struct ieee80211_hw *dev) { struct rtl8187_priv *priv = dev->priv; @@ -755,6 +877,7 @@ static int rtl8187_start(struct ieee80211_hw *dev) (7 << 0 /* long retry limit */) | (7 << 21 /* MAX TX DMA */)); rtl8187_init_urbs(dev); + rtl8187b_init_status_urb(dev); mutex_unlock(&priv->conf_mutex); return 0; } @@ -831,6 +954,9 @@ static void rtl8187_stop(struct ieee80211_hw *dev) usb_kill_urb(info->urb); kfree_skb(skb); } + while ((skb = skb_dequeue(&priv->b_tx_status.queue))) + dev_kfree_skb_any(skb); + usb_kill_urb(priv->b_tx_status.urb); mutex_unlock(&priv->conf_mutex); } @@ -1317,6 +1443,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, goto err_free_dev; } mutex_init(&priv->conf_mutex); + skb_queue_head_init(&priv->b_tx_status.queue); printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s\n", wiphy_name(dev->wiphy), dev->wiphy->perm_addr, -- cgit v1.2.2 From c8f96974eebbc8f078ad64f2d8041e6dce741d67 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 13 Nov 2008 12:30:41 -0600 Subject: rtl8187: Remove module warning and dependence on CONFIG_EXPERIMENTAL After considerable testing, the initial fears that the driver might damage some flavors of RTL8187B hardware seem to be groundless. Accordingly, the logged warning is removed. In addition, Kconfig is changed to remove the dependence on EXPERIMENTAL. Signed-off-by: Larry Finger Acked-by: Herton Ronaldo Krzesinski Acked-by: Hin-Tak Leung Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 2 +- drivers/net/wireless/rtl818x/rtl8187_dev.c | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 84b49c83ae67..7ea916b257e4 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -508,7 +508,7 @@ config RTL8180 config RTL8187 tristate "Realtek 8187 and 8187B USB support" - depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL + depends on MAC80211 && USB && WLAN_80211 select EEPROM_93CX6 ---help--- This is a driver for RTL8187 and RTL8187B based cards. diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 876d4f93d310..180bc50db329 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -1409,9 +1409,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, } if (priv->is_rtl8187b) { - printk(KERN_WARNING "rtl8187: 8187B chip detected. Support " - "is EXPERIMENTAL, and could damage your\n" - " hardware, use at your own risk\n"); + printk(KERN_WARNING "rtl8187: 8187B chip detected.\n"); dev->flags |= IEEE80211_HW_SIGNAL_DBM; } else { dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC; -- cgit v1.2.2 From f1ca2167d89d991eed519c789d3902f9682c06b8 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Thu, 13 Nov 2008 23:07:33 +0100 Subject: rt2x00: Detect USB BULK in/out endpoints Instead of hardcoding the used in/out endpoints we should detect them by walking through all available endpoints. rt2800usb will gain the most out of this, because the legacy drivers indicate that there are multiple endpoints available. However this code might benefit at least rt73usb as well for the MIMO queues, and if we are really lucky rt2500usb will benefit because for the TX and PRIO queues. Even if rt2500usb and rt73usb do not get better performance after this patch, the endpoint detection still belongs to rt2x00usb, and it shouldn't hurt to always try to detect the available endpoints. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500usb.c | 11 ++-- drivers/net/wireless/rt2x00/rt2x00.h | 8 +-- drivers/net/wireless/rt2x00/rt2x00queue.h | 22 +++++++- drivers/net/wireless/rt2x00/rt2x00usb.c | 91 ++++++++++++++++++++++++++++--- drivers/net/wireless/rt2x00/rt73usb.c | 7 +-- 5 files changed, 111 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 40eb64358821..0447e93306ad 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1108,7 +1108,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - int pipe = usb_sndbulkpipe(usb_dev, 1); + int pipe = usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint); int length; u16 reg; @@ -1134,7 +1134,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) * length of the data to usb_fill_bulk_urb. Pass the skb * to the driver to determine what the length should be. */ - length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb); + length = rt2x00dev->ops->lib->get_tx_data_len(entry); usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe, entry->skb->data, length, rt2500usb_beacondone, @@ -1156,8 +1156,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC); } -static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb) +static int rt2500usb_get_tx_data_len(struct queue_entry *entry) { int length; @@ -1165,8 +1164,8 @@ static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * The length _must_ be a multiple of 2, * but it must _not_ be a multiple of the USB packet size. */ - length = roundup(skb->len, 2); - length += (2 * !(length % rt2x00dev->usb_maxpacket)); + length = roundup(entry->skb->len, 2); + length += (2 * !(length % entry->queue->usb_maxpacket)); return length; } diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index fee61bee1e7e..780ba7365810 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -555,8 +555,7 @@ struct rt2x00lib_ops { struct txentry_desc *txdesc); int (*write_tx_data) (struct queue_entry *entry); void (*write_beacon) (struct queue_entry *entry); - int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb); + int (*get_tx_data_len) (struct queue_entry *entry); void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev, const enum data_queue_qid queue); @@ -798,11 +797,6 @@ struct rt2x00_dev { */ short lna_gain; - /* - * USB Max frame size (for rt2500usb & rt73usb). - */ - u16 usb_maxpacket; - /* * Current TX power value. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 4d3c7246f9ae..2e99ab53ec65 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -380,6 +380,8 @@ enum queue_index { * @cw_max: The cw max value for outgoing frames (field ignored in RX queue). * @data_size: Maximum data size for the frames in this queue. * @desc_size: Hardware descriptor size for the data in this queue. + * @usb_endpoint: Device endpoint used for communication (USB only) + * @usb_maxpacket: Max packet size for given endpoint (USB only) */ struct data_queue { struct rt2x00_dev *rt2x00dev; @@ -401,6 +403,9 @@ struct data_queue { unsigned short data_size; unsigned short desc_size; + + unsigned short usb_endpoint; + unsigned short usb_maxpacket; }; /** @@ -443,6 +448,19 @@ struct data_queue_desc { #define tx_queue_end(__dev) \ &(__dev)->tx[(__dev)->ops->tx_queues] +/** + * queue_next - Return pointer to next queue in list (HELPER MACRO). + * @__queue: Current queue for which we need the next queue + * + * Using the current queue address we take the address directly + * after the queue to take the next queue. Note that this macro + * should be used carefully since it does not protect against + * moving past the end of the list. (See macros &queue_end and + * &tx_queue_end for determining the end of the queue). + */ +#define queue_next(__queue) \ + &(__queue)[1] + /** * queue_loop - Loop through the queues within a specific range (HELPER MACRO). * @__entry: Pointer where the current queue entry will be stored in. @@ -453,8 +471,8 @@ struct data_queue_desc { */ #define queue_loop(__entry, __start, __end) \ for ((__entry) = (__start); \ - prefetch(&(__entry)[1]), (__entry) != (__end); \ - (__entry) = &(__entry)[1]) + prefetch(queue_next(__entry)), (__entry) != (__end);\ + (__entry) = queue_next(__entry)) /** * queue_for_each - Loop through all queues diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 2fbf78ff6b18..83df312ac56f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -234,10 +234,10 @@ int rt2x00usb_write_tx_data(struct queue_entry *entry) * length of the data to usb_fill_bulk_urb. Pass the skb * to the driver to determine what the length should be. */ - length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb); + length = rt2x00dev->ops->lib->get_tx_data_len(entry); usb_fill_bulk_urb(entry_priv->urb, usb_dev, - usb_sndbulkpipe(usb_dev, 1), + usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint), entry->skb->data, length, rt2x00usb_interrupt_txdone, entry); @@ -378,10 +378,11 @@ void rt2x00usb_clear_entry(struct queue_entry *entry) struct usb_device *usb_dev = to_usb_device_intf(entry->queue->rt2x00dev->dev); struct queue_entry_priv_usb *entry_priv = entry->priv_data; + int pipe; if (entry->queue->qid == QID_RX) { - usb_fill_bulk_urb(entry_priv->urb, usb_dev, - usb_rcvbulkpipe(usb_dev, 1), + pipe = usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint); + usb_fill_bulk_urb(entry_priv->urb, usb_dev, pipe, entry->skb->data, entry->skb->len, rt2x00usb_interrupt_rxdone, entry); @@ -393,6 +394,76 @@ void rt2x00usb_clear_entry(struct queue_entry *entry) } EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry); +static void rt2x00usb_assign_endpoint(struct data_queue *queue, + struct usb_endpoint_descriptor *ep_desc) +{ + struct usb_device *usb_dev = to_usb_device_intf(queue->rt2x00dev->dev); + int pipe; + + queue->usb_endpoint = usb_endpoint_num(ep_desc); + + if (queue->qid == QID_RX) { + pipe = usb_rcvbulkpipe(usb_dev, queue->usb_endpoint); + queue->usb_maxpacket = usb_maxpacket(usb_dev, pipe, 0); + } else { + pipe = usb_sndbulkpipe(usb_dev, queue->usb_endpoint); + queue->usb_maxpacket = usb_maxpacket(usb_dev, pipe, 1); + } + + if (!queue->usb_maxpacket) + queue->usb_maxpacket = 1; +} + +static int rt2x00usb_find_endpoints(struct rt2x00_dev *rt2x00dev) +{ + struct usb_interface *intf = to_usb_interface(rt2x00dev->dev); + struct usb_host_interface *intf_desc = intf->cur_altsetting; + struct usb_endpoint_descriptor *ep_desc; + struct data_queue *queue = rt2x00dev->tx; + struct usb_endpoint_descriptor *tx_ep_desc = NULL; + unsigned int i; + + /* + * Walk through all available endpoints to search for "bulk in" + * and "bulk out" endpoints. When we find such endpoints collect + * the information we need from the descriptor and assign it + * to the queue. + */ + for (i = 0; i < intf_desc->desc.bNumEndpoints; i++) { + ep_desc = &intf_desc->endpoint[i].desc; + + if (usb_endpoint_is_bulk_in(ep_desc)) { + rt2x00usb_assign_endpoint(rt2x00dev->rx, ep_desc); + } else if (usb_endpoint_is_bulk_out(ep_desc)) { + rt2x00usb_assign_endpoint(queue, ep_desc); + + if (queue != queue_end(rt2x00dev)) + queue = queue_next(queue); + tx_ep_desc = ep_desc; + } + } + + /* + * At least 1 endpoint for RX and 1 endpoint for TX must be available. + */ + if (!rt2x00dev->rx->usb_endpoint || !rt2x00dev->tx->usb_endpoint) { + ERROR(rt2x00dev, "Bulk-in/Bulk-out endpoints not found\n"); + return -EPIPE; + } + + /* + * It might be possible not all queues have a dedicated endpoint. + * Loop through all TX queues and copy the endpoint information + * which we have gathered from already assigned endpoints. + */ + txall_queue_for_each(rt2x00dev, queue) { + if (!queue->usb_endpoint) + rt2x00usb_assign_endpoint(queue, tx_ep_desc); + } + + return 0; +} + static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, struct data_queue *queue) { @@ -463,6 +534,13 @@ int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) struct data_queue *queue; int status; + /* + * Find endpoints for each queue + */ + status = rt2x00usb_find_endpoints(rt2x00dev); + if (status) + goto exit; + /* * Allocate DMA */ @@ -554,11 +632,6 @@ int rt2x00usb_probe(struct usb_interface *usb_intf, rt2x00dev->ops = ops; rt2x00dev->hw = hw; - rt2x00dev->usb_maxpacket = - usb_maxpacket(usb_dev, usb_sndbulkpipe(usb_dev, 1), 1); - if (!rt2x00dev->usb_maxpacket) - rt2x00dev->usb_maxpacket = 1; - retval = rt2x00usb_alloc_reg(rt2x00dev); if (retval) goto exit_free_device; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index ee59b4e35cdc..37a782dc8080 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1508,8 +1508,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry) entry->skb = NULL; } -static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb) +static int rt73usb_get_tx_data_len(struct queue_entry *entry) { int length; @@ -1517,8 +1516,8 @@ static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, * The length _must_ be a multiple of 4, * but it must _not_ be a multiple of the USB packet size. */ - length = roundup(skb->len, 4); - length += (4 * !(length % rt2x00dev->usb_maxpacket)); + length = roundup(entry->skb->len, 4); + length += (4 * !(length % entry->queue->usb_maxpacket)); return length; } -- cgit v1.2.2 From 1d450cfc97bc223e9f94a2fab888bb168e284448 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 13 Nov 2008 19:11:56 -0800 Subject: ath9k: Clarify we only want 32-bit DMA Use DMA_32BIT_MASK to clarify we only want 32-bit DMA memory. What was there before is also 32-bit but this makes it clearer Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index c928db9dc0f0..9d64ef565c03 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -1591,9 +1591,8 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (pci_enable_device(pdev)) return -EIO; - /* XXX 32-bit addressing only */ - if (pci_set_dma_mask(pdev, 0xffffffff)) { - printk(KERN_ERR "ath_pci: 32-bit DMA not available\n"); + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { + printk(KERN_ERR "ath9k: 32-bit DMA not available\n"); ret = -ENODEV; goto bad; } -- cgit v1.2.2 From 97b777db57f7226e31a4abd5e69d732037743195 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 13 Nov 2008 19:11:57 -0800 Subject: ath9k: make DMA memory consistent Make the DMAable mameory consistent with pci_set_consistent_dma_mask(). The DMA-mapping.txt Documentation recommends this but for PCI-X considerations and on strange architecture like SGI SN2, not sure why it would fix an issue but lets see if it does, just in case. Before this, this driver was tested with x86_64 with about 7 GB of RAM, not sure if this is really needed. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/main.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 9d64ef565c03..3355ba4043e8 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -1591,9 +1591,18 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (pci_enable_device(pdev)) return -EIO; - if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + + if (ret) { printk(KERN_ERR "ath9k: 32-bit DMA not available\n"); - ret = -ENODEV; + goto bad; + } + + ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + + if (ret) { + printk(KERN_ERR "ath9k: 32-bit DMA consistent " + "DMA enable faled\n"); goto bad; } -- cgit v1.2.2 From f16f33df4d27f18bc6512dbe83ebbeaa693f0359 Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 14 Nov 2008 16:27:53 +0530 Subject: mac80211: Use the HT capabilities from the IE instead of the station's caps. Signed-off-by: Sujith Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ht.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 3e231d756776..a1eed7032c9b 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -36,7 +36,7 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband, ht_cap->ht_supported = true; - ht_cap->cap = ht_cap->cap & sband->ht_cap.cap; + ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & sband->ht_cap.cap; ht_cap->cap &= ~IEEE80211_HT_CAP_SM_PS; ht_cap->cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS; -- cgit v1.2.2 From d131bb59c142585c389b5284d93743e4e065e393 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 15 Nov 2008 17:02:31 +0100 Subject: p54: enable Mesh Point support This patch enables Mesh Point operation for any p54 device. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 1796b8c6c5b8..e0066c4c0346 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -1058,6 +1058,7 @@ static int p54_tx_fill(struct ieee80211_hw *dev, struct sk_buff *skb, break; case NL80211_IFTYPE_AP: case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { *aid = 0; *queue = 3; @@ -1570,6 +1571,7 @@ static int p54_add_interface(struct ieee80211_hw *dev, case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: priv->mode = conf->type; break; default: @@ -1589,6 +1591,7 @@ static int p54_add_interface(struct ieee80211_hw *dev, p54_setup_mac(dev, P54_FILTER_TYPE_AP, priv->mac_addr); break; case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: p54_setup_mac(dev, P54_FILTER_TYPE_IBSS, NULL); break; default: @@ -1653,6 +1656,7 @@ static int p54_config_interface(struct ieee80211_hw *dev, break; case NL80211_IFTYPE_AP: case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: memcpy(priv->bssid, conf->bssid, ETH_ALEN); ret = p54_set_freq(dev, dev->conf.channel->center_freq); if (ret) @@ -1826,9 +1830,10 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; - dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION | - NL80211_IFTYPE_ADHOC | - NL80211_IFTYPE_AP); + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_MESH_POINT); dev->channel_change_time = 1000; /* TODO: find actual value */ priv->tx_stats[0].limit = 1; /* Beacon queue */ -- cgit v1.2.2 From ffed785898a6dfd5f80d069bcb607b8cd5613c76 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 14 Nov 2008 19:41:22 +0100 Subject: p54: minor fixes This patch contains only contains a one-liner fixes and enhancements Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 10 +++++++--- drivers/net/wireless/p54/p54common.h | 2 +- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index e0066c4c0346..6bf5123c10b2 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -530,6 +530,8 @@ static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb) rx_status.noise = priv->noise; /* XX correct? */ rx_status.qual = (100 * hdr->rssi) / 127; + if (hdr->rate & 0x10) + rx_status.flag |= RX_FLAG_SHORTPRE; rx_status.rate_idx = (dev->conf.channel->band == IEEE80211_BAND_2GHZ ? hdr->rate : (hdr->rate - 4)) & 0xf; rx_status.freq = freq; @@ -576,7 +578,7 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb) unsigned long flags; u32 freed = 0, last_addr = priv->rx_start; - if (!skb || !dev) + if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue))) return; spin_lock_irqsave(&priv->tx_queue.lock, flags); @@ -1199,7 +1201,10 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb) txhdr->key_type = 0; txhdr->key_len = 0; txhdr->hw_queue = queue; - txhdr->backlog = 32; + if (current_queue) + txhdr->backlog = current_queue->len; + else + txhdr->backlog = 0; memset(txhdr->durations, 0, sizeof(txhdr->durations)); txhdr->tx_antenna = (info->antenna_sel_tx == 0) ? 2 : info->antenna_sel_tx - 1; @@ -1548,7 +1553,6 @@ static void p54_stop(struct ieee80211_hw *dev) while ((skb = skb_dequeue(&priv->tx_queue))) kfree_skb(skb); - kfree(priv->cached_beacon); priv->cached_beacon = NULL; priv->stop(dev); priv->tsf_high32 = priv->tsf_low32 = 0; diff --git a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h index 8c8793cb2d79..3419f16be938 100644 --- a/drivers/net/wireless/p54/p54common.h +++ b/drivers/net/wireless/p54/p54common.h @@ -259,7 +259,7 @@ enum p54_rx_decrypt_status { P54_DECRYPT_NOCKIPMIC, P54_DECRYPT_FAIL_WEP, P54_DECRYPT_FAIL_TKIP, - P54_DECRYPT_FAIL_MICAHEL, + P54_DECRYPT_FAIL_MICHAEL, P54_DECRYPT_FAIL_CKIPKP, P54_DECRYPT_FAIL_CKIPMIC, P54_DECRYPT_FAIL_AESCCMP -- cgit v1.2.2 From 40db0b22591f59811feeb7cad26fdde92a190663 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 16 Nov 2008 12:20:32 +0100 Subject: p54pci: cache firmware for suspend/resume Johannes pointed out that the driver has cache the firmware for suspend/resume cycles. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 16 ++++++++++---- drivers/net/wireless/p54/p54pci.c | 42 +++++++++++++++++++----------------- drivers/net/wireless/p54/p54pci.h | 2 +- 3 files changed, 35 insertions(+), 25 deletions(-) diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 6bf5123c10b2..3373b022d91e 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -1524,16 +1524,24 @@ static int p54_start(struct ieee80211_hw *dev) mutex_lock(&priv->conf_mutex); err = priv->open(dev); - if (!err) - priv->mode = NL80211_IFTYPE_MONITOR; + if (err) + goto out; P54_SET_QUEUE(priv->qos_params[0], 0x0002, 0x0003, 0x0007, 47); P54_SET_QUEUE(priv->qos_params[1], 0x0002, 0x0007, 0x000f, 94); P54_SET_QUEUE(priv->qos_params[2], 0x0003, 0x000f, 0x03ff, 0); P54_SET_QUEUE(priv->qos_params[3], 0x0007, 0x000f, 0x03ff, 0); err = p54_set_edcf(dev); - if (!err) - err = p54_init_stats(dev); + if (err) + goto out; + err = p54_init_stats(dev); + if (err) + goto out; + err = p54_setup_mac(dev, P54_FILTER_TYPE_NONE, NULL); + if (err) + goto out; + priv->mode = NL80211_IFTYPE_MONITOR; +out: mutex_unlock(&priv->conf_mutex); return err; } diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index c4a868ae6d6b..d21c509325fe 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -47,7 +47,6 @@ MODULE_DEVICE_TABLE(pci, p54p_table); static int p54p_upload_firmware(struct ieee80211_hw *dev) { struct p54p_priv *priv = dev->priv; - const struct firmware *fw_entry = NULL; __le32 reg; int err; __le32 *data; @@ -73,23 +72,15 @@ static int p54p_upload_firmware(struct ieee80211_hw *dev) P54P_WRITE(ctrl_stat, reg); wmb(); - err = request_firmware(&fw_entry, "isl3886pci", &priv->pdev->dev); - if (err) { - printk(KERN_ERR "%s (p54pci): cannot find firmware " - "(isl3886pci)\n", pci_name(priv->pdev)); - err = request_firmware(&fw_entry, "isl3886", &priv->pdev->dev); - if (err) - return err; - } + /* wait for the firmware to reset properly */ + mdelay(10); - err = p54_parse_firmware(dev, fw_entry); - if (err) { - release_firmware(fw_entry); + err = p54_parse_firmware(dev, priv->firmware); + if (err) return err; - } - data = (__le32 *) fw_entry->data; - remains = fw_entry->size; + data = (__le32 *) priv->firmware->data; + remains = priv->firmware->size; device_addr = ISL38XX_DEV_FIRMWARE_ADDR; while (remains) { u32 i = 0; @@ -107,8 +98,6 @@ static int p54p_upload_firmware(struct ieee80211_hw *dev) P54P_READ(int_enable); } - release_firmware(fw_entry); - reg = P54P_READ(ctrl_stat); reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); @@ -500,15 +489,14 @@ static int __devinit p54p_probe(struct pci_dev *pdev, if (mem_len < sizeof(struct p54p_csr)) { printk(KERN_ERR "%s (p54pci): Too short PCI resources\n", pci_name(pdev)); - pci_disable_device(pdev); - return err; + goto err_disable_dev; } err = pci_request_regions(pdev, "p54pci"); if (err) { printk(KERN_ERR "%s (p54pci): Cannot obtain PCI resources\n", pci_name(pdev)); - return err; + goto err_disable_dev; } if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) || @@ -561,6 +549,17 @@ static int __devinit p54p_probe(struct pci_dev *pdev, spin_lock_init(&priv->lock); tasklet_init(&priv->rx_tasklet, p54p_rx_tasklet, (unsigned long)dev); + err = request_firmware(&priv->firmware, "isl3886pci", + &priv->pdev->dev); + if (err) { + printk(KERN_ERR "%s (p54pci): cannot find firmware " + "(isl3886pci)\n", pci_name(priv->pdev)); + err = request_firmware(&priv->firmware, "isl3886", + &priv->pdev->dev); + if (err) + goto err_free_common; + } + err = p54p_open(dev); if (err) goto err_free_common; @@ -579,6 +578,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev, return 0; err_free_common: + release_firmware(priv->firmware); p54_free_common(dev); pci_free_consistent(pdev, sizeof(*priv->ring_control), priv->ring_control, priv->ring_control_dma); @@ -592,6 +592,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev, err_free_reg: pci_release_regions(pdev); + err_disable_dev: pci_disable_device(pdev); return err; } @@ -606,6 +607,7 @@ static void __devexit p54p_remove(struct pci_dev *pdev) ieee80211_unregister_hw(dev); priv = dev->priv; + release_firmware(priv->firmware); pci_free_consistent(pdev, sizeof(*priv->ring_control), priv->ring_control, priv->ring_control_dma); p54_free_common(dev); diff --git a/drivers/net/wireless/p54/p54pci.h b/drivers/net/wireless/p54/p54pci.h index 4a6778070afc..fbb683953fb2 100644 --- a/drivers/net/wireless/p54/p54pci.h +++ b/drivers/net/wireless/p54/p54pci.h @@ -93,7 +93,7 @@ struct p54p_priv { struct pci_dev *pdev; struct p54p_csr __iomem *map; struct tasklet_struct rx_tasklet; - + const struct firmware *firmware; spinlock_t lock; struct p54p_ring_control *ring_control; dma_addr_t ring_control_dma; -- cgit v1.2.2 From ced0957442af69c5c41b00db85a933ed7876cc40 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 14 Nov 2008 19:42:39 +0100 Subject: p54: honour bss_info_changed's basic_rates and other settings As was pointed out in "p54: honour bss_info_changed's short slot time settings", bss_info_changed provides more useful settings that can be used by the driver. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54.h | 3 +++ drivers/net/wireless/p54/p54common.c | 29 ++++++++++++++++++++++++----- 2 files changed, 27 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h index b585ff65e0e4..491ab96c7b67 100644 --- a/drivers/net/wireless/p54/p54.h +++ b/drivers/net/wireless/p54/p54.h @@ -102,6 +102,9 @@ struct p54_common { unsigned int output_power; u32 tsf_low32; u32 tsf_high32; + u64 basic_rate_mask; + u16 wakeup_timer; + u16 aid; struct ieee80211_tx_queue_stats tx_stats[8]; struct p54_edcf_queue_param qos_params[8]; struct ieee80211_low_level_stats stats; diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 3373b022d91e..829b3f916db9 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -1249,20 +1249,20 @@ static int p54_setup_mac(struct ieee80211_hw *dev, u16 mode, const u8 *bssid) setup->rx_antenna = priv->rx_antenna; setup->rx_align = 0; if (priv->fw_var < 0x500) { - setup->v1.basic_rate_mask = cpu_to_le32(0x15f); + setup->v1.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask); memset(setup->v1.rts_rates, 0, 8); setup->v1.rx_addr = cpu_to_le32(priv->rx_end); setup->v1.max_rx = cpu_to_le16(priv->rx_mtu); setup->v1.rxhw = cpu_to_le16(priv->rxhw); - setup->v1.wakeup_timer = cpu_to_le16(500); + setup->v1.wakeup_timer = cpu_to_le16(priv->wakeup_timer); setup->v1.unalloc0 = cpu_to_le16(0); } else { setup->v2.rx_addr = cpu_to_le32(priv->rx_end); setup->v2.max_rx = cpu_to_le16(priv->rx_mtu); setup->v2.rxhw = cpu_to_le16(priv->rxhw); - setup->v2.timer = cpu_to_le16(1000); + setup->v2.timer = cpu_to_le16(priv->wakeup_timer); setup->v2.truncate = cpu_to_le16(48896); - setup->v2.basic_rate_mask = cpu_to_le32(0x15f); + setup->v2.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask); setup->v2.sbss_offset = 0; setup->v2.mcast_window = 0; setup->v2.rx_rssi_threshold = 0; @@ -1348,7 +1348,7 @@ static int p54_set_freq(struct ieee80211_hw *dev, u16 frequency) } else { chan->v2.rssical_mul = cpu_to_le16(130); chan->v2.rssical_add = cpu_to_le16(0xfe70); - chan->v2.basic_rate_mask = cpu_to_le32(0x15f); + chan->v2.basic_rate_mask = cpu_to_le32(priv->basic_rate_mask); memset(chan->v2.rts_rates, 0, 8); } priv->tx(dev, skb, 1); @@ -1808,6 +1808,24 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev, priv->use_short_slot = info->use_short_slot; p54_set_edcf(dev); } + if (changed & BSS_CHANGED_BASIC_RATES) { + if (dev->conf.channel->band == IEEE80211_BAND_5GHZ) + priv->basic_rate_mask = (info->basic_rates << 4); + else + priv->basic_rate_mask = info->basic_rates; + p54_setup_mac(dev, priv->mac_mode, priv->bssid); + if (priv->fw_var >= 0x500) + p54_set_freq(dev, dev->conf.channel->center_freq); + } + if (changed & BSS_CHANGED_ASSOC) { + if (info->assoc) { + priv->aid = info->aid; + priv->wakeup_timer = info->beacon_int * + info->dtim_period * 5; + p54_setup_mac(dev, priv->mac_mode, priv->bssid); + } + } + } static const struct ieee80211_ops p54_ops = { @@ -1837,6 +1855,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) priv = dev->priv; priv->mode = NL80211_IFTYPE_UNSPECIFIED; + priv->basic_rate_mask = 0x15f; skb_queue_head_init(&priv->tx_queue); dev->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | -- cgit v1.2.2 From 4d3601b234a51fdd268c8ef8068d239e26dd7ef1 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Sat, 15 Nov 2008 00:49:49 +0530 Subject: ath9k: Configure AR_PHY_SWITCH_COM with apropriate antenna control This fixes the poor wireless connection which happens even if we are very well in the range. Signed-off-by: Don.breslin@atheros.com Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath9k/eeprom.c b/drivers/net/wireless/ath9k/eeprom.c index 180e54114659..466dbce2c5f7 100644 --- a/drivers/net/wireless/ath9k/eeprom.c +++ b/drivers/net/wireless/ath9k/eeprom.c @@ -1244,7 +1244,7 @@ bool ath9k_hw_eeprom_set_board_values(struct ath_hal *ah, txRxAttenLocal = IS_CHAN_2GHZ(chan) ? 23 : 44; - ath9k_hw_get_eeprom_antenna_cfg(ah, chan, 1, &ant_config); + ath9k_hw_get_eeprom_antenna_cfg(ah, chan, 0, &ant_config); REG_WRITE(ah, AR_PHY_SWITCH_COM, ant_config); for (i = 0; i < AR5416_MAX_CHAINS; i++) { -- cgit v1.2.2 From 4ada424db196c78746fec255d493cacb1c9feddf Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 14 Nov 2008 14:44:22 -0800 Subject: mac80211: don't assume driver has been attached on registration mac80211's ieee80211_register_hw() is often called within the probe path so it cannot assume the device's driver structure has been attached yet so to create a workqueue instead of using driver->name use the wiphy's phy%d name. The name doesn't really matter anyway. This should fix sporadic oopses found when we race to beat the driver pointer setting. Not even sure how this was working properly. http://www.kerneloops.org/search.php?search=ieee80211_register_hw Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index d631dc96c323..cec9b6d3e1ce 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -722,7 +722,6 @@ EXPORT_SYMBOL(ieee80211_alloc_hw); int ieee80211_register_hw(struct ieee80211_hw *hw) { struct ieee80211_local *local = hw_to_local(hw); - const char *name; int result; enum ieee80211_band band; struct net_device *mdev; @@ -787,8 +786,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) mdev->header_ops = &ieee80211_header_ops; mdev->set_multicast_list = ieee80211_master_set_multicast_list; - name = wiphy_dev(local->hw.wiphy)->driver->name; - local->hw.workqueue = create_freezeable_workqueue(name); + local->hw.workqueue = + create_freezeable_workqueue(wiphy_name(local->hw.wiphy)); if (!local->hw.workqueue) { result = -ENOMEM; goto fail_workqueue; -- cgit v1.2.2 From 8eb41c93685318d177276d1819915571aca7ebb1 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 14 Nov 2008 17:44:53 -0800 Subject: mac80211: make Minstrel the default rate control algorithm This makes minstrel the default rate control algorithm for mac80211. For more information see: http://wireless.kernel.org/en/developers/Documentation/mac80211/RateControl/minstrel If someone can come up with a better algorithm they get a prize (undisclosed). Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/mac80211/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 7f710a27e91c..60c16162474c 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -16,20 +16,20 @@ menu "Rate control algorithm selection" config MAC80211_RC_PID bool "PID controller based rate control algorithm" if EMBEDDED - default y ---help--- This option enables a TX rate control algorithm for mac80211 that uses a PID controller to select the TX rate. config MAC80211_RC_MINSTREL - bool "Minstrel" + bool "Minstrel" if EMBEDDED + default y ---help--- This option enables the 'minstrel' TX rate control algorithm choice prompt "Default rate control algorithm" - default MAC80211_RC_DEFAULT_PID + default MAC80211_RC_DEFAULT_MINSTREL ---help--- This option selects the default rate control algorithm mac80211 will use. Note that this default can still be @@ -55,8 +55,8 @@ endchoice config MAC80211_RC_DEFAULT string - default "pid" if MAC80211_RC_DEFAULT_PID default "minstrel" if MAC80211_RC_DEFAULT_MINSTREL + default "pid" if MAC80211_RC_DEFAULT_PID default "" endmenu -- cgit v1.2.2 From f941f8590c06c6b1a77c4b5a5df59f39a3c7d1e9 Mon Sep 17 00:00:00 2001 From: Andrey Borzenkov Date: Sat, 15 Nov 2008 17:15:09 +0300 Subject: orinoco: indicate it is using dBm in wireless_stats and spy Since WE7 /proc/net/wireless checks whether level and noise are in dBm and shows them accordingly. Indicate that we return signal and noice levels in dBm. Before: Inter-| sta-| Quality | Discarded packets | Missed | WE face | tus | link level noise | nwid crypt frag retry misc | beacon | 22 eth1: 0000 65. 219. 165. 0 0 148 41 0 0 After: Inter-| sta-| Quality | Discarded packets | Missed | WE face | tus | link level noise | nwid crypt frag retry misc | beacon | 22 eth1: 0000 65. -37. -91. 0 0 0 0 0 0 While at it, replace raw numbers with appropriate macro. Signed-off-by: Andrey Borzenkov Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/orinoco.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c index fd9263980d69..7ec038ac1c36 100644 --- a/drivers/net/wireless/orinoco/orinoco.c +++ b/drivers/net/wireless/orinoco/orinoco.c @@ -809,7 +809,7 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) wstats->qual.qual = (int)le16_to_cpu(cq.qual); wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; - wstats->qual.updated = 7; + wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; } } @@ -1168,7 +1168,7 @@ static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac, wstats.level = level - 0x95; wstats.noise = noise - 0x95; wstats.qual = (level > noise) ? (level - noise) : 0; - wstats.updated = 7; + wstats.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; /* Update spy records */ wireless_spy_update(dev, mac, &wstats); } -- cgit v1.2.2 From d507748ac6de67369e76058a8a921cd22734f40a Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 16 Nov 2008 00:08:50 +0100 Subject: rt2x00: Don't switch off LED on initialization When we switch off the LEDS during initialization we kill rt73usb from proper functioning. The immediate result after the first LED command are MCU failures and a complete breakdown of TX/RX. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00leds.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c index 66c61b1eca5d..68f4e0fc35b9 100644 --- a/drivers/net/wireless/rt2x00/rt2x00leds.c +++ b/drivers/net/wireless/rt2x00/rt2x00leds.c @@ -111,12 +111,6 @@ static int rt2x00leds_register_led(struct rt2x00_dev *rt2x00dev, led->led_dev.name = name; led->led_dev.brightness = LED_OFF; - /* - * Ensure the LED is off, it might have been enabled - * by the hardware when the device was powered on. - */ - led->led_dev.brightness_set(&led->led_dev, LED_OFF); - retval = led_classdev_register(device, &led->led_dev); if (retval) { ERROR(rt2x00dev, "Failed to register led handler.\n"); -- cgit v1.2.2 From 1dc5a84166d83c892cbf192cad58ebdde95d3ac4 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 16 Nov 2008 17:09:25 -0600 Subject: mac80211: Fix pid rate-setting algorithm to allow rate changes In commit 9ea2c74 named "mac80211/drivers: rewrite the rate control API", the meaning of status.rates[i].count was changed from number of retries to total number of tries. As a result, the pid rate-setting algorithm fails because every packet appears to have needed a retransmit. Signed-off-by: Larry Finger Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/rc80211_pid_algo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c index 96ceb7e86c5c..b16801cde06f 100644 --- a/net/mac80211/rc80211_pid_algo.c +++ b/net/mac80211/rc80211_pid_algo.c @@ -256,7 +256,7 @@ static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_ba if (!(info->flags & IEEE80211_TX_STAT_ACK)) { spinfo->tx_num_failed += 2; spinfo->tx_num_xmit++; - } else if (info->status.rates[0].count) { + } else if (info->status.rates[0].count > 1) { spinfo->tx_num_failed++; spinfo->tx_num_xmit++; } -- cgit v1.2.2 From 1548c86ab1552199a3b99b958ccfb590fc9c8f84 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 17 Nov 2008 09:08:21 -0600 Subject: rtl8187: Fix transmission count sent to mac80211 In the commit entitled "mac80211/drivers: rewrite the rate control API", the meaning of the packet transmit count was changed from the number of retries to the total number. In driver rtl8187, this change was missed. Signed-off-by: Larry Finger Acked-by: Herton Ronaldo Krzesinski Tested-by: Hin-Tak Leung Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 180bc50db329..69ea5222f163 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -496,7 +496,7 @@ static void rtl8187b_status_cb(struct urb *urb) __skb_unlink(skb, &priv->b_tx_status.queue); if (tok) info->flags |= IEEE80211_TX_STAT_ACK; - info->status.rates[0].count = pkt_rc; + info->status.rates[0].count = pkt_rc + 1; ieee80211_tx_status_irqsafe(hw, skb); } -- cgit v1.2.2 From 3fcdfb4b940a226184bc01bfc5c58b32b509b965 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Tue, 18 Nov 2008 01:19:56 +0530 Subject: ath9k: Fix panic while unregistering rfkill [ 6133.670329] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 6133.672802] IP: [] ieee80211_stop_queues+0x26/0x40 [mac80211] [ 6133.672802] PGD 759dc067 PUD 74f1d067 PMD 0 [ 6133.672802] Oops: 0002 [#1] PREEMPT SMP [ 6133.672802] last sysfs file: /sys/class/backlight/acpi_video0/brightness [ 6133.672802] CPU 0 [ 6133.672802] Modules linked in: ath9k(-) mac80211 pciehp pci_hotplug arc4 ecb joydev pcmcia ppdev lp ppp_generic psmouse sg pcspkr s] [ 6133.735830] Pid: 4445, comm: rmmod Tainted: G W 2.6.28-rc5-wl #1 [ 6133.735830] RIP: 0010:[] [] ieee80211_stop_queues+0x26/0x40 [mac80211] [ 6133.735830] RSP: 0018:ffff88007d1efd10 EFLAGS: 00010246 [ 6133.735830] RAX: 0000000000000000 RBX: ffff880074f41aa0 RCX: 0000000000000000 [ 6133.735830] RDX: 0000000000000010 RSI: 0000000000000000 RDI: ffff880074f40340 [ 6133.735830] RBP: ffff880074990000 R08: 0000000000000000 R09: 000000000000224d [ 6133.735830] R10: 0000000000000000 R11: ffffffff8031dc70 R12: 0000000000000000 [ 6133.735830] R13: 0000000000000001 R14: ffff880074f46c9c R15: 0000000000000000 [ 6133.735830] FS: 00007f1e2e0bc6f0(0000) GS:ffffffff805e0b80(0000) knlGS:0000000000000000 [ 6133.735830] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6133.735830] CR2: 0000000000000010 CR3: 0000000075593000 CR4: 00000000000006e0 [ 6133.735830] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6133.735830] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 6133.735830] Process rmmod (pid: 4445, threadinfo ffff88007d1ee000, task ffff88007c0c8000) [ 6133.735830] Stack: [ 6133.735830] ffffffffa034d583 ffff88007c7d9410 ffff88007c7d9410 ffff88007c7d9410 [ 6133.735830] ffffffff80481dab ffff880074f41aa0 00000000fffffff0 0000000000000000 [ 6133.735830] 0000000000000001 0000000000000001 ffffffffa034d8a5 ffff88007c7d9400 [ 6133.735830] Call Trace: [ 6133.735830] [] ? ath_radio_disable+0x33/0x150 [ath9k] [ 6133.735830] [] ? __mutex_lock_slowpath+0x20b/0x2a0 [ 6133.735830] [] ? ath_sw_toggle_radio+0x65/0xa0 [ath9k] [ 6133.735830] [] ? rfkill_toggle_radio+0x74/0x140 [rfkill] [ 6133.735830] [] ? rfkill_remove_switch+0x67/0x80 [rfkill] [ 6133.735830] [] ? rfkill_unregister+0x25/0x50 [rfkill] [ 6133.735830] [] ? ath_detach+0xf5/0x140 [ath9k] [ 6133.735830] [] ? ath_pci_remove+0x29/0x80 [ath9k] [ 6133.735830] [] ? pci_device_remove+0x2c/0x60 [ 6133.735830] [] ? __device_release_driver+0x99/0x100 [ 6133.735830] [] ? driver_detach+0xc0/0xd0 [ 6133.735830] [] ? bus_remove_driver+0x8e/0xd0 [ 6133.735830] [] ? pci_unregister_driver+0x36/0xa0 [ 6133.735830] [] ? exit_ath_pci+0x10/0x29 [ath9k] [ 6133.735830] [] ? sys_delete_module+0x1cb/0x2d0 [ 6133.735830] [] ? do_munmap+0x349/0x390 [ 6133.735830] [] ? __up_write+0x21/0x150 [ 6133.735830] [] ? system_call_fastpath+0x16/0x1b [ 6133.735830] Code: c3 0f 1f 40 00 0f b7 57 5e 0f b7 47 5c 01 c2 74 30 31 c9 66 90 48 8b 57 78 0f b7 c1 48 c1 e0 07 48 03 82 00 03 00 [ 6133.735830] RIP [] ieee80211_stop_queues+0x26/0x40 [mac80211] Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 3355ba4043e8..4c2c58e2db47 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -834,13 +834,13 @@ static void ath_detach(struct ath_softc *sc) DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach ATH hw\n", __func__); - ieee80211_unregister_hw(hw); - - ath_deinit_leds(sc); - #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) ath_deinit_rfkill(sc); #endif + ath_deinit_leds(sc); + + ieee80211_unregister_hw(hw); + ath_rate_control_unregister(); ath_rate_detach(sc->sc_rc); -- cgit v1.2.2 From 256b77593f3ec07f58cd1f0d573ffe9ccd941b5b Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:03:12 +0530 Subject: ath9k: Merge struct ath_tx_ratectrl with ath_rate_node Avoid casting of ath_tx_ratctrl and access the elements directly. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/rc.c | 346 +++++++++++++++++++--------------------- drivers/net/wireless/ath9k/rc.h | 71 ++++----- 2 files changed, 192 insertions(+), 225 deletions(-) diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 517992d14808..21116c51758c 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -542,19 +542,19 @@ static inline int8_t median(int8_t a, int8_t b, int8_t c) } static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table, - struct ath_tx_ratectrl *rate_ctrl) + struct ath_rate_node *ath_rc_priv) { u8 i, j, idx, idx_next; - for (i = rate_ctrl->max_valid_rate - 1; i > 0; i--) { + for (i = ath_rc_priv->max_valid_rate - 1; i > 0; i--) { for (j = 0; j <= i-1; j++) { - idx = rate_ctrl->valid_rate_index[j]; - idx_next = rate_ctrl->valid_rate_index[j+1]; + idx = ath_rc_priv->valid_rate_index[j]; + idx_next = ath_rc_priv->valid_rate_index[j+1]; if (rate_table->info[idx].ratekbps > rate_table->info[idx_next].ratekbps) { - rate_ctrl->valid_rate_index[j] = idx_next; - rate_ctrl->valid_rate_index[j+1] = idx; + ath_rc_priv->valid_rate_index[j] = idx_next; + ath_rc_priv->valid_rate_index[j+1] = idx; } } } @@ -562,40 +562,40 @@ static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table, /* Access functions for valid_txrate_mask */ -static void ath_rc_init_valid_txmask(struct ath_tx_ratectrl *rate_ctrl) +static void ath_rc_init_valid_txmask(struct ath_rate_node *ath_rc_priv) { u8 i; - for (i = 0; i < rate_ctrl->rate_table_size; i++) - rate_ctrl->valid_rate_index[i] = FALSE; + for (i = 0; i < ath_rc_priv->rate_table_size; i++) + ath_rc_priv->valid_rate_index[i] = FALSE; } -static inline void ath_rc_set_valid_txmask(struct ath_tx_ratectrl *rate_ctrl, +static inline void ath_rc_set_valid_txmask(struct ath_rate_node *ath_rc_priv, u8 index, int valid_tx_rate) { - ASSERT(index <= rate_ctrl->rate_table_size); - rate_ctrl->valid_rate_index[index] = valid_tx_rate ? TRUE : FALSE; + ASSERT(index <= ath_rc_priv->rate_table_size); + ath_rc_priv->valid_rate_index[index] = valid_tx_rate ? TRUE : FALSE; } -static inline int ath_rc_isvalid_txmask(struct ath_tx_ratectrl *rate_ctrl, +static inline int ath_rc_isvalid_txmask(struct ath_rate_node *ath_rc_priv, u8 index) { - ASSERT(index <= rate_ctrl->rate_table_size); - return rate_ctrl->valid_rate_index[index]; + ASSERT(index <= ath_rc_priv->rate_table_size); + return ath_rc_priv->valid_rate_index[index]; } /* Iterators for valid_txrate_mask */ static inline int ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table, - struct ath_tx_ratectrl *rate_ctrl, + struct ath_rate_node *ath_rc_priv, u8 cur_valid_txrate, u8 *next_idx) { u8 i; - for (i = 0; i < rate_ctrl->max_valid_rate - 1; i++) { - if (rate_ctrl->valid_rate_index[i] == cur_valid_txrate) { - *next_idx = rate_ctrl->valid_rate_index[i+1]; + for (i = 0; i < ath_rc_priv->max_valid_rate - 1; i++) { + if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) { + *next_idx = ath_rc_priv->valid_rate_index[i+1]; return TRUE; } } @@ -625,14 +625,14 @@ static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw) static inline int ath_rc_get_nextlowervalid_txrate(const struct ath_rate_table *rate_table, - struct ath_tx_ratectrl *rate_ctrl, + struct ath_rate_node *ath_rc_priv, u8 cur_valid_txrate, u8 *next_idx) { int8_t i; - for (i = 1; i < rate_ctrl->max_valid_rate ; i++) { - if (rate_ctrl->valid_rate_index[i] == cur_valid_txrate) { - *next_idx = rate_ctrl->valid_rate_index[i-1]; + for (i = 1; i < ath_rc_priv->max_valid_rate ; i++) { + if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) { + *next_idx = ath_rc_priv->valid_rate_index[i-1]; return TRUE; } } @@ -647,11 +647,9 @@ ath_rc_sib_init_validrates(struct ath_rate_node *ath_rc_priv, const struct ath_rate_table *rate_table, u32 capflag) { - struct ath_tx_ratectrl *rate_ctrl; u8 i, hi = 0; u32 valid; - rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv); for (i = 0; i < rate_table->rate_cnt; i++) { valid = (ath_rc_priv->single_stream ? rate_table->info[i].valid_single_stream : @@ -663,11 +661,11 @@ ath_rc_sib_init_validrates(struct ath_rate_node *ath_rc_priv, if (!ath_rc_valid_phyrate(phy, capflag, FALSE)) continue; - valid_rate_count = rate_ctrl->valid_phy_ratecnt[phy]; + valid_rate_count = ath_rc_priv->valid_phy_ratecnt[phy]; - rate_ctrl->valid_phy_rateidx[phy][valid_rate_count] = i; - rate_ctrl->valid_phy_ratecnt[phy] += 1; - ath_rc_set_valid_txmask(rate_ctrl, i, TRUE); + ath_rc_priv->valid_phy_rateidx[phy][valid_rate_count] = i; + ath_rc_priv->valid_phy_ratecnt[phy] += 1; + ath_rc_set_valid_txmask(ath_rc_priv, i, TRUE); hi = A_MAX(hi, i); } } @@ -685,8 +683,6 @@ ath_rc_sib_setvalid_rates(struct ath_rate_node *ath_rc_priv, { /* XXX: Clean me up and make identation friendly */ u8 i, j, hi = 0; - struct ath_tx_ratectrl *rate_ctrl = - (struct ath_tx_ratectrl *)(ath_rc_priv); /* Use intersection of working rates and valid rates */ for (i = 0; i < rateset->rs_nrates; i++) { @@ -714,12 +710,12 @@ ath_rc_sib_setvalid_rates(struct ath_rate_node *ath_rc_priv, continue; valid_rate_count = - rate_ctrl->valid_phy_ratecnt[phy]; + ath_rc_priv->valid_phy_ratecnt[phy]; - rate_ctrl->valid_phy_rateidx[phy] + ath_rc_priv->valid_phy_rateidx[phy] [valid_rate_count] = j; - rate_ctrl->valid_phy_ratecnt[phy] += 1; - ath_rc_set_valid_txmask(rate_ctrl, j, TRUE); + ath_rc_priv->valid_phy_ratecnt[phy] += 1; + ath_rc_set_valid_txmask(ath_rc_priv, j, TRUE); hi = A_MAX(hi, j); } } @@ -733,8 +729,6 @@ ath_rc_sib_setvalid_htrates(struct ath_rate_node *ath_rc_priv, u8 *mcs_set, u32 capflag) { u8 i, j, hi = 0; - struct ath_tx_ratectrl *rate_ctrl = - (struct ath_tx_ratectrl *)(ath_rc_priv); /* Use intersection of working rates and valid rates */ for (i = 0; i < ((struct ath_rateset *)mcs_set)->rs_nrates; i++) { @@ -754,10 +748,10 @@ ath_rc_sib_setvalid_htrates(struct ath_rate_node *ath_rc_priv, if (!ath_rc_valid_phyrate(phy, capflag, FALSE)) continue; - rate_ctrl->valid_phy_rateidx[phy] - [rate_ctrl->valid_phy_ratecnt[phy]] = j; - rate_ctrl->valid_phy_ratecnt[phy] += 1; - ath_rc_set_valid_txmask(rate_ctrl, j, TRUE); + ath_rc_priv->valid_phy_rateidx[phy] + [ath_rc_priv->valid_phy_ratecnt[phy]] = j; + ath_rc_priv->valid_phy_ratecnt[phy] += 1; + ath_rc_set_valid_txmask(ath_rc_priv, j, TRUE); hi = A_MAX(hi, j); } } @@ -875,16 +869,12 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, u32 dt, best_thruput, this_thruput, now_msec; u8 rate, next_rate, best_rate, maxindex, minindex; int8_t rssi_last, rssi_reduce = 0, index = 0; - struct ath_tx_ratectrl *rate_ctrl = NULL; - - rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv ? - (ath_rc_priv) : NULL); *is_probing = FALSE; - rssi_last = median(rate_ctrl->rssi_last, - rate_ctrl->rssi_last_prev, - rate_ctrl->rssi_last_prev2); + rssi_last = median(ath_rc_priv->rssi_last, + ath_rc_priv->rssi_last_prev, + ath_rc_priv->rssi_last_prev2); /* * Age (reduce) last ack rssi based on how old it is. @@ -896,7 +886,7 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, */ now_msec = jiffies_to_msecs(jiffies); - dt = now_msec - rate_ctrl->rssi_time; + dt = now_msec - ath_rc_priv->rssi_time; if (dt >= 185) rssi_reduce = 10; @@ -915,7 +905,7 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, */ best_thruput = 0; - maxindex = rate_ctrl->max_valid_rate-1; + maxindex = ath_rc_priv->max_valid_rate-1; minindex = 0; best_rate = minindex; @@ -927,8 +917,8 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, for (index = maxindex; index >= minindex ; index--) { u8 per_thres; - rate = rate_ctrl->valid_rate_index[index]; - if (rate > rate_ctrl->rate_max_phy) + rate = ath_rc_priv->valid_rate_index[index]; + if (rate > ath_rc_priv->rate_max_phy) continue; /* @@ -942,7 +932,7 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, * 10-15 and we would be worse off then staying * at the current rate. */ - per_thres = rate_ctrl->state[rate].per; + per_thres = ath_rc_priv->state[rate].per; if (per_thres < 12) per_thres = 12; @@ -961,29 +951,29 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, * of max retries, use the min rate for the next retry */ if (is_retry) - rate = rate_ctrl->valid_rate_index[minindex]; + rate = ath_rc_priv->valid_rate_index[minindex]; - rate_ctrl->rssi_last_lookup = rssi_last; + ath_rc_priv->rssi_last_lookup = rssi_last; /* * Must check the actual rate (ratekbps) to account for * non-monoticity of 11g's rate table */ - if (rate >= rate_ctrl->rate_max_phy && probe_allowed) { - rate = rate_ctrl->rate_max_phy; + if (rate >= ath_rc_priv->rate_max_phy && probe_allowed) { + rate = ath_rc_priv->rate_max_phy; /* Probe the next allowed phy state */ /* FIXME:XXXX Check to make sure ratMax is checked properly */ if (ath_rc_get_nextvalid_txrate(rate_table, - rate_ctrl, rate, &next_rate) && - (now_msec - rate_ctrl->probe_time > + ath_rc_priv, rate, &next_rate) && + (now_msec - ath_rc_priv->probe_time > rate_table->probe_interval) && - (rate_ctrl->hw_maxretry_pktcnt >= 1)) { + (ath_rc_priv->hw_maxretry_pktcnt >= 1)) { rate = next_rate; - rate_ctrl->probe_rate = rate; - rate_ctrl->probe_time = now_msec; - rate_ctrl->hw_maxretry_pktcnt = 0; + ath_rc_priv->probe_rate = rate; + ath_rc_priv->probe_time = now_msec; + ath_rc_priv->hw_maxretry_pktcnt = 0; *is_probing = TRUE; } } @@ -994,8 +984,8 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, * normally 1 rather than 0 because of the rate 9 vs 6 issue * in the old code. */ - if (rate > (rate_ctrl->rate_table_size - 1)) - rate = rate_ctrl->rate_table_size - 1; + if (rate > (ath_rc_priv->rate_table_size - 1)) + rate = ath_rc_priv->rate_table_size - 1; ASSERT((rate_table->info[rate].valid && !ath_rc_priv->single_stream) || (rate_table->info[rate].valid_single_stream && @@ -1031,13 +1021,11 @@ static u8 ath_rc_rate_getidx(struct ath_softc *sc, { u32 j; u8 nextindex; - struct ath_tx_ratectrl *rate_ctrl = - (struct ath_tx_ratectrl *)(ath_rc_priv); if (min_rate) { for (j = RATE_TABLE_SIZE; j > 0; j--) { if (ath_rc_get_nextlowervalid_txrate(rate_table, - rate_ctrl, rix, &nextindex)) + ath_rc_priv, rix, &nextindex)) rix = nextindex; else break; @@ -1045,7 +1033,7 @@ static u8 ath_rc_rate_getidx(struct ath_softc *sc, } else { for (j = stepdown; j > 0; j--) { if (ath_rc_get_nextlowervalid_txrate(rate_table, - rate_ctrl, rix, &nextindex)) + ath_rc_priv, rix, &nextindex)) rix = nextindex; else break; @@ -1225,7 +1213,6 @@ static void ath_rc_update_ht(struct ath_softc *sc, struct ath_tx_info_priv *info_priv, int tx_rate, int xretries, int retries) { - struct ath_tx_ratectrl *rate_ctrl; u32 now_msec = jiffies_to_msecs(jiffies); int state_change = FALSE, rate, count; u8 last_per; @@ -1249,8 +1236,6 @@ static void ath_rc_update_ht(struct ath_softc *sc, if (!ath_rc_priv) return; - rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv); - ASSERT(tx_rate >= 0); if (tx_rate < 0) return; @@ -1262,30 +1247,30 @@ static void ath_rc_update_ht(struct ath_softc *sc, info_priv->tx.ts_rssi < 3 ? 0 : info_priv->tx.ts_rssi - 3; - last_per = rate_ctrl->state[tx_rate].per; + last_per = ath_rc_priv->state[tx_rate].per; if (xretries) { /* Update the PER. */ if (xretries == 1) { - rate_ctrl->state[tx_rate].per += 30; - if (rate_ctrl->state[tx_rate].per > 100) - rate_ctrl->state[tx_rate].per = 100; + ath_rc_priv->state[tx_rate].per += 30; + if (ath_rc_priv->state[tx_rate].per > 100) + ath_rc_priv->state[tx_rate].per = 100; } else { /* xretries == 2 */ count = ARRAY_SIZE(nretry_to_per_lookup); if (retries >= count) retries = count - 1; /* new_PER = 7/8*old_PER + 1/8*(currentPER) */ - rate_ctrl->state[tx_rate].per = - (u8)(rate_ctrl->state[tx_rate].per - - (rate_ctrl->state[tx_rate].per >> 3) + + ath_rc_priv->state[tx_rate].per = + (u8)(ath_rc_priv->state[tx_rate].per - + (ath_rc_priv->state[tx_rate].per >> 3) + ((100) >> 3)); } /* xretries == 1 or 2 */ - if (rate_ctrl->probe_rate == tx_rate) - rate_ctrl->probe_rate = 0; + if (ath_rc_priv->probe_rate == tx_rate) + ath_rc_priv->probe_rate = 0; } else { /* xretries == 0 */ /* Update the PER. */ @@ -1307,10 +1292,10 @@ static void ath_rc_update_ht(struct ath_softc *sc, * simplified version of the sum of these two terms. */ if (info_priv->n_frames > 0) - rate_ctrl->state[tx_rate].per + ath_rc_priv->state[tx_rate].per = (u8) - (rate_ctrl->state[tx_rate].per - - (rate_ctrl->state[tx_rate].per >> 3) + + (ath_rc_priv->state[tx_rate].per - + (ath_rc_priv->state[tx_rate].per >> 3) + ((100*(retries*info_priv->n_frames + info_priv->n_bad_frames) / (info_priv->n_frames * @@ -1318,23 +1303,23 @@ static void ath_rc_update_ht(struct ath_softc *sc, } else { /* new_PER = 7/8*old_PER + 1/8*(currentPER) */ - rate_ctrl->state[tx_rate].per = (u8) - (rate_ctrl->state[tx_rate].per - - (rate_ctrl->state[tx_rate].per >> 3) + + ath_rc_priv->state[tx_rate].per = (u8) + (ath_rc_priv->state[tx_rate].per - + (ath_rc_priv->state[tx_rate].per >> 3) + (nretry_to_per_lookup[retries] >> 3)); } - rate_ctrl->rssi_last_prev2 = rate_ctrl->rssi_last_prev; - rate_ctrl->rssi_last_prev = rate_ctrl->rssi_last; - rate_ctrl->rssi_last = info_priv->tx.ts_rssi; - rate_ctrl->rssi_time = now_msec; + ath_rc_priv->rssi_last_prev2 = ath_rc_priv->rssi_last_prev; + ath_rc_priv->rssi_last_prev = ath_rc_priv->rssi_last; + ath_rc_priv->rssi_last = info_priv->tx.ts_rssi; + ath_rc_priv->rssi_time = now_msec; /* * If we got at most one retry then increase the max rate if * this was a probe. Otherwise, ignore the probe. */ - if (rate_ctrl->probe_rate && rate_ctrl->probe_rate == tx_rate) { + if (ath_rc_priv->probe_rate && ath_rc_priv->probe_rate == tx_rate) { if (retries > 0 || 2 * info_priv->n_bad_frames > info_priv->n_frames) { /* @@ -1344,17 +1329,17 @@ static void ath_rc_update_ht(struct ath_softc *sc, * the subframes were bad then also consider * the probe a failure. */ - rate_ctrl->probe_rate = 0; + ath_rc_priv->probe_rate = 0; } else { u8 probe_rate = 0; - rate_ctrl->rate_max_phy = rate_ctrl->probe_rate; - probe_rate = rate_ctrl->probe_rate; + ath_rc_priv->rate_max_phy = ath_rc_priv->probe_rate; + probe_rate = ath_rc_priv->probe_rate; - if (rate_ctrl->state[probe_rate].per > 30) - rate_ctrl->state[probe_rate].per = 20; + if (ath_rc_priv->state[probe_rate].per > 30) + ath_rc_priv->state[probe_rate].per = 20; - rate_ctrl->probe_rate = 0; + ath_rc_priv->probe_rate = 0; /* * Since this probe succeeded, we allow the next @@ -1362,7 +1347,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, * to move up faster if the probes are * succesful. */ - rate_ctrl->probe_time = now_msec - + ath_rc_priv->probe_time = now_msec - rate_table->probe_interval / 2; } } @@ -1373,51 +1358,51 @@ static void ath_rc_update_ht(struct ath_softc *sc, * this was because of collisions or poor signal. * * Later: if rssi_ack is close to - * rate_ctrl->state[txRate].rssi_thres and we see lots + * ath_rc_priv->state[txRate].rssi_thres and we see lots * of retries, then we could increase - * rate_ctrl->state[txRate].rssi_thres. + * ath_rc_priv->state[txRate].rssi_thres. */ - rate_ctrl->hw_maxretry_pktcnt = 0; + ath_rc_priv->hw_maxretry_pktcnt = 0; } else { /* * It worked with no retries. First ignore bogus (small) * rssi_ack values. */ - if (tx_rate == rate_ctrl->rate_max_phy && - rate_ctrl->hw_maxretry_pktcnt < 255) { - rate_ctrl->hw_maxretry_pktcnt++; + if (tx_rate == ath_rc_priv->rate_max_phy && + ath_rc_priv->hw_maxretry_pktcnt < 255) { + ath_rc_priv->hw_maxretry_pktcnt++; } if (info_priv->tx.ts_rssi >= rate_table->info[tx_rate].rssi_ack_validmin) { /* Average the rssi */ - if (tx_rate != rate_ctrl->rssi_sum_rate) { - rate_ctrl->rssi_sum_rate = tx_rate; - rate_ctrl->rssi_sum = - rate_ctrl->rssi_sum_cnt = 0; + if (tx_rate != ath_rc_priv->rssi_sum_rate) { + ath_rc_priv->rssi_sum_rate = tx_rate; + ath_rc_priv->rssi_sum = + ath_rc_priv->rssi_sum_cnt = 0; } - rate_ctrl->rssi_sum += info_priv->tx.ts_rssi; - rate_ctrl->rssi_sum_cnt++; + ath_rc_priv->rssi_sum += info_priv->tx.ts_rssi; + ath_rc_priv->rssi_sum_cnt++; - if (rate_ctrl->rssi_sum_cnt > 4) { + if (ath_rc_priv->rssi_sum_cnt > 4) { int32_t rssi_ackAvg = - (rate_ctrl->rssi_sum + 2) / 4; + (ath_rc_priv->rssi_sum + 2) / 4; int8_t rssi_thres = - rate_ctrl->state[tx_rate]. + ath_rc_priv->state[tx_rate]. rssi_thres; int8_t rssi_ack_vmin = rate_table->info[tx_rate]. rssi_ack_validmin; - rate_ctrl->rssi_sum = - rate_ctrl->rssi_sum_cnt = 0; + ath_rc_priv->rssi_sum = + ath_rc_priv->rssi_sum_cnt = 0; /* Now reduce the current * rssi threshold. */ if ((rssi_ackAvg < rssi_thres + 2) && (rssi_thres > rssi_ack_vmin)) { - rate_ctrl->state[tx_rate]. + ath_rc_priv->state[tx_rate]. rssi_thres--; } @@ -1433,14 +1418,14 @@ static void ath_rc_update_ht(struct ath_softc *sc, * If this rate looks bad (high PER) then stop using it for * a while (except if we are probing). */ - if (rate_ctrl->state[tx_rate].per >= 55 && tx_rate > 0 && + if (ath_rc_priv->state[tx_rate].per >= 55 && tx_rate > 0 && rate_table->info[tx_rate].ratekbps <= - rate_table->info[rate_ctrl->rate_max_phy].ratekbps) { - ath_rc_get_nextlowervalid_txrate(rate_table, rate_ctrl, - (u8) tx_rate, &rate_ctrl->rate_max_phy); + rate_table->info[ath_rc_priv->rate_max_phy].ratekbps) { + ath_rc_get_nextlowervalid_txrate(rate_table, ath_rc_priv, + (u8) tx_rate, &ath_rc_priv->rate_max_phy); /* Don't probe for a little while. */ - rate_ctrl->probe_time = now_msec; + ath_rc_priv->probe_time = now_msec; } if (state_change) { @@ -1452,16 +1437,16 @@ static void ath_rc_update_ht(struct ath_softc *sc, * increasing between the CCK and OFDM rates.) */ for (rate = tx_rate; rate < - rate_ctrl->rate_table_size - 1; rate++) { + ath_rc_priv->rate_table_size - 1; rate++) { if (rate_table->info[rate+1].phy != rate_table->info[tx_rate].phy) break; - if (rate_ctrl->state[rate].rssi_thres + + if (ath_rc_priv->state[rate].rssi_thres + rate_table->info[rate].rssi_ack_deltamin > - rate_ctrl->state[rate+1].rssi_thres) { - rate_ctrl->state[rate+1].rssi_thres = - rate_ctrl->state[rate]. + ath_rc_priv->state[rate+1].rssi_thres) { + ath_rc_priv->state[rate+1].rssi_thres = + ath_rc_priv->state[rate]. rssi_thres + rate_table->info[rate]. rssi_ack_deltamin; @@ -1474,25 +1459,25 @@ static void ath_rc_update_ht(struct ath_softc *sc, rate_table->info[tx_rate].phy) break; - if (rate_ctrl->state[rate].rssi_thres + + if (ath_rc_priv->state[rate].rssi_thres + rate_table->info[rate].rssi_ack_deltamin > - rate_ctrl->state[rate+1].rssi_thres) { - if (rate_ctrl->state[rate+1].rssi_thres < + ath_rc_priv->state[rate+1].rssi_thres) { + if (ath_rc_priv->state[rate+1].rssi_thres < rate_table->info[rate]. rssi_ack_deltamin) - rate_ctrl->state[rate].rssi_thres = 0; + ath_rc_priv->state[rate].rssi_thres = 0; else { - rate_ctrl->state[rate].rssi_thres = - rate_ctrl->state[rate+1]. + ath_rc_priv->state[rate].rssi_thres = + ath_rc_priv->state[rate+1]. rssi_thres - rate_table->info[rate]. rssi_ack_deltamin; } - if (rate_ctrl->state[rate].rssi_thres < + if (ath_rc_priv->state[rate].rssi_thres < rate_table->info[rate]. rssi_ack_validmin) { - rate_ctrl->state[rate].rssi_thres = + ath_rc_priv->state[rate].rssi_thres = rate_table->info[rate]. rssi_ack_validmin; } @@ -1502,50 +1487,50 @@ static void ath_rc_update_ht(struct ath_softc *sc, /* Make sure the rates below this have lower PER */ /* Monotonicity is kept only for rates below the current rate. */ - if (rate_ctrl->state[tx_rate].per < last_per) { + if (ath_rc_priv->state[tx_rate].per < last_per) { for (rate = tx_rate - 1; rate >= 0; rate--) { if (rate_table->info[rate].phy != rate_table->info[tx_rate].phy) break; - if (rate_ctrl->state[rate].per > - rate_ctrl->state[rate+1].per) { - rate_ctrl->state[rate].per = - rate_ctrl->state[rate+1].per; + if (ath_rc_priv->state[rate].per > + ath_rc_priv->state[rate+1].per) { + ath_rc_priv->state[rate].per = + ath_rc_priv->state[rate+1].per; } } } /* Maintain monotonicity for rates above the current rate */ - for (rate = tx_rate; rate < rate_ctrl->rate_table_size - 1; rate++) { - if (rate_ctrl->state[rate+1].per < rate_ctrl->state[rate].per) - rate_ctrl->state[rate+1].per = - rate_ctrl->state[rate].per; + for (rate = tx_rate; rate < ath_rc_priv->rate_table_size - 1; rate++) { + if (ath_rc_priv->state[rate+1].per < ath_rc_priv->state[rate].per) + ath_rc_priv->state[rate+1].per = + ath_rc_priv->state[rate].per; } /* Every so often, we reduce the thresholds and * PER (different for CCK and OFDM). */ - if (now_msec - rate_ctrl->rssi_down_time >= + if (now_msec - ath_rc_priv->rssi_down_time >= rate_table->rssi_reduce_interval) { - for (rate = 0; rate < rate_ctrl->rate_table_size; rate++) { - if (rate_ctrl->state[rate].rssi_thres > + for (rate = 0; rate < ath_rc_priv->rate_table_size; rate++) { + if (ath_rc_priv->state[rate].rssi_thres > rate_table->info[rate].rssi_ack_validmin) - rate_ctrl->state[rate].rssi_thres -= 1; + ath_rc_priv->state[rate].rssi_thres -= 1; } - rate_ctrl->rssi_down_time = now_msec; + ath_rc_priv->rssi_down_time = now_msec; } /* Every so often, we reduce the thresholds * and PER (different for CCK and OFDM). */ - if (now_msec - rate_ctrl->per_down_time >= + if (now_msec - ath_rc_priv->per_down_time >= rate_table->rssi_reduce_interval) { - for (rate = 0; rate < rate_ctrl->rate_table_size; rate++) { - rate_ctrl->state[rate].per = - 7 * rate_ctrl->state[rate].per / 8; + for (rate = 0; rate < ath_rc_priv->rate_table_size; rate++) { + ath_rc_priv->state[rate].per = + 7 * ath_rc_priv->state[rate].per / 8; } - rate_ctrl->per_down_time = now_msec; + ath_rc_priv->per_down_time = now_msec; } } @@ -1560,7 +1545,6 @@ static void ath_rc_update(struct ath_softc *sc, { struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; struct ath_rate_table *rate_table; - struct ath_tx_ratectrl *rate_ctrl; struct ath_rc_series rcs[4]; u8 flags; u32 series = 0, rix; @@ -1568,7 +1552,6 @@ static void ath_rc_update(struct ath_softc *sc, memcpy(rcs, info_priv->rcs, 4 * sizeof(rcs[0])); rate_table = (struct ath_rate_table *) asc->hw_rate_table[sc->sc_curmode]; - rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv); ASSERT(rcs[0].tries != 0); /* @@ -1583,7 +1566,7 @@ static void ath_rc_update(struct ath_softc *sc, /* If HT40 and we have switched mode from * 40 to 20 => don't update */ if ((flags & ATH_RC_CW40_FLAG) && - (rate_ctrl->rc_phy_mode != + (ath_rc_priv->rc_phy_mode != (flags & ATH_RC_CW40_FLAG))) return; if ((flags & ATH_RC_CW40_FLAG) && @@ -1619,7 +1602,7 @@ static void ath_rc_update(struct ath_softc *sc, flags = rcs[series].flags; /* If HT40 and we have switched mode from 40 to 20 => don't update */ if ((flags & ATH_RC_CW40_FLAG) && - (rate_ctrl->rc_phy_mode != (flags & ATH_RC_CW40_FLAG))) + (ath_rc_priv->rc_phy_mode != (flags & ATH_RC_CW40_FLAG))) return; if ((flags & ATH_RC_CW40_FLAG) && (flags & ATH_RC_SGI_FLAG)) @@ -1697,8 +1680,6 @@ static void ath_rc_sib_update(struct ath_softc *sc, struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; struct ath_rateset *rateset = negotiated_rates; u8 *ht_mcs = (u8 *)negotiated_htrates; - struct ath_tx_ratectrl *rate_ctrl = - (struct ath_tx_ratectrl *)ath_rc_priv; u8 i, j, k, hi = 0, hthi = 0; rate_table = (struct ath_rate_table *) @@ -1706,24 +1687,24 @@ static void ath_rc_sib_update(struct ath_softc *sc, /* Initial rate table size. Will change depending * on the working rate set */ - rate_ctrl->rate_table_size = MAX_TX_RATE_TBL; + ath_rc_priv->rate_table_size = MAX_TX_RATE_TBL; /* Initialize thresholds according to the global rate table */ - for (i = 0 ; (i < rate_ctrl->rate_table_size) && (!keep_state); i++) { - rate_ctrl->state[i].rssi_thres = + for (i = 0 ; (i < ath_rc_priv->rate_table_size) && (!keep_state); i++) { + ath_rc_priv->state[i].rssi_thres = rate_table->info[i].rssi_ack_validmin; - rate_ctrl->state[i].per = 0; + ath_rc_priv->state[i].per = 0; } /* Determine the valid rates */ - ath_rc_init_valid_txmask(rate_ctrl); + ath_rc_init_valid_txmask(ath_rc_priv); for (i = 0; i < WLAN_RC_PHY_MAX; i++) { for (j = 0; j < MAX_TX_RATE_PHY; j++) - rate_ctrl->valid_phy_rateidx[i][j] = 0; - rate_ctrl->valid_phy_ratecnt[i] = 0; + ath_rc_priv->valid_phy_rateidx[i][j] = 0; + ath_rc_priv->valid_phy_ratecnt[i] = 0; } - rate_ctrl->rc_phy_mode = (capflag & WLAN_RC_40_FLAG); + ath_rc_priv->rc_phy_mode = (capflag & WLAN_RC_40_FLAG); /* Set stream capability */ ath_rc_priv->single_stream = (capflag & WLAN_RC_DS_FLAG) ? 0 : 1; @@ -1745,33 +1726,33 @@ static void ath_rc_sib_update(struct ath_softc *sc, hi = A_MAX(hi, hthi); } - rate_ctrl->rate_table_size = hi + 1; - rate_ctrl->rate_max_phy = 0; - ASSERT(rate_ctrl->rate_table_size <= MAX_TX_RATE_TBL); + ath_rc_priv->rate_table_size = hi + 1; + ath_rc_priv->rate_max_phy = 0; + ASSERT(ath_rc_priv->rate_table_size <= MAX_TX_RATE_TBL); for (i = 0, k = 0; i < WLAN_RC_PHY_MAX; i++) { - for (j = 0; j < rate_ctrl->valid_phy_ratecnt[i]; j++) { - rate_ctrl->valid_rate_index[k++] = - rate_ctrl->valid_phy_rateidx[i][j]; + for (j = 0; j < ath_rc_priv->valid_phy_ratecnt[i]; j++) { + ath_rc_priv->valid_rate_index[k++] = + ath_rc_priv->valid_phy_rateidx[i][j]; } if (!ath_rc_valid_phyrate(i, rate_table->initial_ratemax, TRUE) - || !rate_ctrl->valid_phy_ratecnt[i]) + || !ath_rc_priv->valid_phy_ratecnt[i]) continue; - rate_ctrl->rate_max_phy = rate_ctrl->valid_phy_rateidx[i][j-1]; + ath_rc_priv->rate_max_phy = ath_rc_priv->valid_phy_rateidx[i][j-1]; } - ASSERT(rate_ctrl->rate_table_size <= MAX_TX_RATE_TBL); + ASSERT(ath_rc_priv->rate_table_size <= MAX_TX_RATE_TBL); ASSERT(k <= MAX_TX_RATE_TBL); - rate_ctrl->max_valid_rate = k; + ath_rc_priv->max_valid_rate = k; /* * Some third party vendors don't send the supported rate series in * order. So sorting to make sure its in order, otherwise our RateFind * Algo will select wrong rates */ - ath_rc_sort_validrates(rate_table, rate_ctrl); - rate_ctrl->rate_max_phy = rate_ctrl->valid_rate_index[k-4]; + ath_rc_sort_validrates(rate_table, ath_rc_priv); + ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4]; } /* @@ -1804,10 +1785,7 @@ static int ath_rate_newassoc(struct ath_softc *sc, */ static void ath_rc_sib_init(struct ath_rate_node *ath_rc_priv) { - struct ath_tx_ratectrl *rate_ctrl; - - rate_ctrl = (struct ath_tx_ratectrl *)(ath_rc_priv); - rate_ctrl->rssi_down_time = jiffies_to_msecs(jiffies); + ath_rc_priv->rssi_down_time = jiffies_to_msecs(jiffies); } diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index 6671097fad72..2166243045de 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -204,8 +204,22 @@ struct ath_tx_ratectrl_state { u8 per; /* recent estimate of packet error rate (%) */ }; +struct ath_rateset { + u8 rs_nrates; + u8 rs_rates[ATH_RATE_MAX]; +}; + +/* per-device state */ +struct ath_rate_softc { + /* phy tables that contain rate control data */ + const void *hw_rate_table[ATH9K_MODE_MAX]; + + /* -1 or index of fixed rate */ + int fixedrix; +}; + /** - * struct ath_tx_ratectrl - TX Rate control Information + * struct ath_rate_node - Rate Control priv data * @state: RC state * @rssi_last: last ACK rssi * @rssi_last_lookup: last ACK rssi used for lookup @@ -224,9 +238,15 @@ struct ath_tx_ratectrl_state { * @valid_phy_ratecnt: valid rate count * @rate_max_phy: phy index for the max rate * @probe_interval: interval for ratectrl to probe for other rates + * @prev_data_rix: rate idx of last data frame + * @ht_cap: HT capabilities + * @single_stream: When TRUE, only single TX stream possible + * @neg_rates: Negotatied rates + * @neg_ht_rates: Negotiated HT rates */ -struct ath_tx_ratectrl { - struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; + +/* per-node state */ +struct ath_rate_node { int8_t rssi_last; int8_t rssi_last_lookup; int8_t rssi_last_prev; @@ -236,55 +256,24 @@ struct ath_tx_ratectrl { int32_t rssi_sum; u8 rate_table_size; u8 probe_rate; - u32 rssi_time; - u32 rssi_down_time; - u32 probe_time; u8 hw_maxretry_pktcnt; u8 max_valid_rate; u8 valid_rate_index[MAX_TX_RATE_TBL]; - u32 per_down_time; - - /* 11n state */ + u8 ht_cap; + u8 single_stream; u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX]; u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL]; u8 rc_phy_mode; u8 rate_max_phy; + u32 rssi_time; + u32 rssi_down_time; + u32 probe_time; + u32 per_down_time; u32 probe_interval; -}; - -struct ath_rateset { - u8 rs_nrates; - u8 rs_rates[ATH_RATE_MAX]; -}; - -/* per-device state */ -struct ath_rate_softc { - /* phy tables that contain rate control data */ - const void *hw_rate_table[ATH9K_MODE_MAX]; - - /* -1 or index of fixed rate */ - int fixedrix; -}; - -/* per-node state */ -struct ath_rate_node { - struct ath_tx_ratectrl tx_ratectrl; - - /* rate idx of last data frame */ u32 prev_data_rix; - - /* ht capabilities */ - u8 ht_cap; - - /* When TRUE, only single stream Tx possible */ - u8 single_stream; - - /* Negotiated rates */ + struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; struct ath_rateset neg_rates; - - /* Negotiated HT rates */ struct ath_rateset neg_ht_rates; - struct ath_rate_softc *asc; struct ath_vap *avp; }; -- cgit v1.2.2 From fe60594a76d04b4fdea597bf93e4186a03d8d60c Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:03:36 +0530 Subject: ath9k: Simplify RC alloc/free functions Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/rc.c | 48 ++++++----------------------------------- 1 file changed, 7 insertions(+), 41 deletions(-) diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 21116c51758c..09d622ab313c 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -780,29 +780,6 @@ struct ath_rate_softc *ath_rate_attach(struct ath_hal *ah) return asc; } -static struct ath_rate_node *ath_rate_node_alloc(struct ath_vap *avp, - struct ath_rate_softc *rsc, - gfp_t gfp) -{ - struct ath_rate_node *anode; - - anode = kzalloc(sizeof(struct ath_rate_node), gfp); - if (anode == NULL) - return NULL; - - anode->avp = avp; - anode->asc = rsc; - avp->rc_node = anode; - - return anode; -} - -static void ath_rate_node_free(struct ath_rate_node *anode) -{ - if (anode != NULL) - kfree(anode); -} - void ath_rate_detach(struct ath_rate_softc *asc) { if (asc != NULL) @@ -1778,17 +1755,6 @@ static int ath_rate_newassoc(struct ath_softc *sc, return 0; } -/* - * This routine is called to initialize the rate control parameters - * in the SIB. It is called initially during system initialization - * or when a station is associated with the AP. - */ -static void ath_rc_sib_init(struct ath_rate_node *ath_rc_priv) -{ - ath_rc_priv->rssi_down_time = jiffies_to_msecs(jiffies); -} - - static void ath_setup_rates(struct ath_softc *sc, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, @@ -1964,21 +1930,23 @@ static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp struct ath_vap *avp; struct ath_rate_node *rate_priv; - DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); - vif = sc->sc_vaps[0]; ASSERT(vif); avp = (void *)vif->drv_priv; - rate_priv = ath_rate_node_alloc(avp, sc->sc_rc, gfp); + rate_priv = kzalloc(sizeof(struct ath_rate_node), gfp); if (!rate_priv) { DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to allocate private rc structure\n", __func__); return NULL; } - ath_rc_sib_init(rate_priv); + + rate_priv->avp = avp; + rate_priv->asc = sc->sc_rc; + avp->rc_node = rate_priv; + rate_priv->rssi_down_time = jiffies_to_msecs(jiffies); return rate_priv; } @@ -1987,10 +1955,8 @@ static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta, void *priv_sta) { struct ath_rate_node *rate_priv = priv_sta; - struct ath_softc *sc = priv; - DPRINTF(sc, ATH_DBG_RATE, "%s", __func__); - ath_rate_node_free(rate_priv); + kfree(rate_priv); } static struct rate_control_ops ath_rate_ops = { -- cgit v1.2.2 From 7b4d27357aebfdaa039f365fd24f2a795af5c0bb Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:04:00 +0530 Subject: ath9k: Remove ath_setup_rates Setup legacy rates in ath_rate_init() itself. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/rc.c | 36 ++++++++++-------------------------- 1 file changed, 10 insertions(+), 26 deletions(-) diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 09d622ab313c..798dff6f6015 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -1755,26 +1755,6 @@ static int ath_rate_newassoc(struct ath_softc *sc, return 0; } -static void ath_setup_rates(struct ath_softc *sc, - struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, - struct ath_rate_node *rc_priv) - -{ - int i, j = 0; - - DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); - - for (i = 0; i < sband->n_bitrates; i++) { - if (sta->supp_rates[sband->band] & BIT(i)) { - rc_priv->neg_rates.rs_rates[j] - = (sband->bitrates[i].bitrate * 2) / 10; - j++; - } - } - rc_priv->neg_rates.rs_nrates = j; -} - void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv) { struct ath_softc *sc = hw->priv; @@ -1895,11 +1875,17 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, struct ath_rate_node *ath_rc_priv = priv_sta; int i, j = 0; - DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); + for (i = 0; i < sband->n_bitrates; i++) { + if (sta->supp_rates[sband->band] & BIT(i)) { + ath_rc_priv->neg_rates.rs_rates[j] + = (sband->bitrates[i].bitrate * 2) / 10; + j++; + } + } + ath_rc_priv->neg_rates.rs_nrates = j; - ath_setup_rates(sc, sband, sta, ath_rc_priv); if (sta->ht_cap.ht_supported) { - for (i = 0; i < 77; i++) { + for (i = 0, j = 0; i < 77; i++) { if (sta->ht_cap.mcs.rx_mask[i/8] & (1<<(i%8))) ath_rc_priv->neg_ht_rates.rs_rates[j++] = i; if (j == ATH_RATE_MAX) @@ -1907,14 +1893,12 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, } ath_rc_priv->neg_ht_rates.rs_nrates = j; } + ath_rc_node_update(sc->hw, priv_sta); } static void *ath_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { - struct ath_softc *sc = hw->priv; - - DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); return hw->priv; } -- cgit v1.2.2 From 4df8ec64fdec5a99ebfe41467d414e235d5d051e Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:04:21 +0530 Subject: ath9k: Remove ath_rate_newassoc() Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/rc.c | 33 ++++++++------------------------- 1 file changed, 8 insertions(+), 25 deletions(-) diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 798dff6f6015..1ec5861d34da 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -1732,29 +1732,6 @@ static void ath_rc_sib_update(struct ath_softc *sc, ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4]; } -/* - * Update rate-control state on station associate/reassociate. - */ -static int ath_rate_newassoc(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - unsigned int capflag, - struct ath_rateset *negotiated_rates, - struct ath_rateset *negotiated_htrates) -{ - - - ath_rc_priv->ht_cap = - ((capflag & ATH_RC_DS_FLAG) ? WLAN_RC_DS_FLAG : 0) | - ((capflag & ATH_RC_SGI_FLAG) ? WLAN_RC_SGI_FLAG : 0) | - ((capflag & ATH_RC_HT_FLAG) ? WLAN_RC_HT_FLAG : 0) | - ((capflag & ATH_RC_CW40_FLAG) ? WLAN_RC_40_FLAG : 0); - - ath_rc_sib_update(sc, ath_rc_priv, ath_rc_priv->ht_cap, 0, - negotiated_rates, negotiated_htrates); - - return 0; -} - void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv) { struct ath_softc *sc = hw->priv; @@ -1766,10 +1743,16 @@ void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv) capflag |= ATH_RC_CW40_FLAG; } - ath_rate_newassoc(sc, rc_priv, capflag, + rc_priv->ht_cap = + ((capflag & ATH_RC_DS_FLAG) ? WLAN_RC_DS_FLAG : 0) | + ((capflag & ATH_RC_SGI_FLAG) ? WLAN_RC_SGI_FLAG : 0) | + ((capflag & ATH_RC_HT_FLAG) ? WLAN_RC_HT_FLAG : 0) | + ((capflag & ATH_RC_CW40_FLAG) ? WLAN_RC_40_FLAG : 0); + + + ath_rc_sib_update(sc, rc_priv, rc_priv->ht_cap, 0, &rc_priv->neg_rates, &rc_priv->neg_ht_rates); - } /* Rate Control callbacks */ -- cgit v1.2.2 From 46494e6df8f6d9739d56c8b980229af4e5d2353f Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:05:13 +0530 Subject: ath9k: Remove half/quarter rate tables Half/Quarter rate tables are needed only for legacy chipsets. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.c | 2 +- drivers/net/wireless/ath9k/rc.c | 143 +++++--------------------------------- drivers/net/wireless/ath9k/rc.h | 2 +- 3 files changed, 20 insertions(+), 127 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c index 3e94dab6c9d9..bab9eaa18da4 100644 --- a/drivers/net/wireless/ath9k/core.c +++ b/drivers/net/wireless/ath9k/core.c @@ -1075,7 +1075,7 @@ int ath_init(u16 devid, struct ath_softc *sc) sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR; setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc); - sc->sc_rc = ath_rate_attach(ah); + sc->sc_rc = ath_rate_attach(sc); if (sc->sc_rc == NULL) { error = -EIO; goto bad2; diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 1ec5861d34da..aafd10df9279 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -348,72 +348,6 @@ static struct ath_rate_table ar5416_11a_ratetable = { 0, /* Phy rates allowed initially */ }; -static struct ath_rate_table ar5416_11a_ratetable_Half = { - 8, - { - { TRUE, TRUE, WLAN_PHY_OFDM, 3000, /* 6 Mb */ - 2700, 0x0b, 0x00, (0x80|6), - 0, 2, 1, 0, 0}, - { TRUE, TRUE, WLAN_PHY_OFDM, 4500, /* 9 Mb */ - 3900, 0x0f, 0x00, 9, - 0, 3, 1, 1, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 12 Mb */ - 5000, 0x0a, 0x00, (0x80|12), - 2, 4, 2, 2, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 9000, /* 18 Mb */ - 6950, 0x0e, 0x00, 18, - 2, 6, 2, 3, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 24 Mb */ - 8650, 0x09, 0x00, (0x80|24), - 4, 10, 3, 4, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 36 Mb */ - 11500, 0x0d, 0x00, 36, - 4, 14, 3, 5, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 48 Mb */ - 13700, 0x08, 0x00, 48, - 4, 19, 3, 6, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 27000, /* 54 Mb */ - 14650, 0x0c, 0x00, 54, - 4, 23, 3, 7, 0 }, - }, - 50, /* probe interval */ - 50, /* rssi reduce interval */ - 0, /* Phy rates allowed initially */ -}; - -static struct ath_rate_table ar5416_11a_ratetable_Quarter = { - 8, - { - { TRUE, TRUE, WLAN_PHY_OFDM, 1500, /* 6 Mb */ - 1350, 0x0b, 0x00, (0x80|3), - 0, 2, 1, 0, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 2250, /* 9 Mb */ - 1950, 0x0f, 0x00, 4, - 0, 3, 1, 1, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 3000, /* 12 Mb */ - 2500, 0x0a, 0x00, (0x80|6), - 2, 4, 2, 2, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 4500, /* 18 Mb */ - 3475, 0x0e, 0x00, 9, - 2, 6, 2, 3, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 25 Mb */ - 4325, 0x09, 0x00, (0x80|12), - 4, 10, 3, 4, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 9000, /* 36 Mb */ - 5750, 0x0d, 0x00, 18, - 4, 14, 3, 5, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 48 Mb */ - 6850, 0x08, 0x00, 24, - 4, 19, 3, 6, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 13500, /* 54 Mb */ - 7325, 0x0c, 0x00, 27, - 4, 23, 3, 7, 0 }, - }, - 50, /* probe interval */ - 50, /* rssi reduce interval */ - 0, /* Phy rates allowed initially */ -}; - static struct ath_rate_table ar5416_11g_ratetable = { 12, { @@ -480,45 +414,6 @@ static struct ath_rate_table ar5416_11b_ratetable = { 0, /* Phy rates allowed initially */ }; -static void ar5416_attach_ratetables(struct ath_rate_softc *sc) -{ - /* - * Attach rate tables. - */ - sc->hw_rate_table[ATH9K_MODE_11B] = &ar5416_11b_ratetable; - sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable; - sc->hw_rate_table[ATH9K_MODE_11G] = &ar5416_11g_ratetable; - - sc->hw_rate_table[ATH9K_MODE_11NA_HT20] = &ar5416_11na_ratetable; - sc->hw_rate_table[ATH9K_MODE_11NG_HT20] = &ar5416_11ng_ratetable; - sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS] = - &ar5416_11na_ratetable; - sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS] = - &ar5416_11na_ratetable; - sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS] = - &ar5416_11ng_ratetable; - sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS] = - &ar5416_11ng_ratetable; -} - -static void ar5416_setquarter_ratetable(struct ath_rate_softc *sc) -{ - sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable_Quarter; - return; -} - -static void ar5416_sethalf_ratetable(struct ath_rate_softc *sc) -{ - sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable_Half; - return; -} - -static void ar5416_setfull_ratetable(struct ath_rate_softc *sc) -{ - sc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable; - return; -} - /* * Return the median of three numbers */ @@ -758,25 +653,33 @@ ath_rc_sib_setvalid_htrates(struct ath_rate_node *ath_rc_priv, return hi; } -/* - * Attach to a device instance. Setup the public definition - * of how much per-node space we need and setup the private - * phy tables that have rate control parameters. - */ -struct ath_rate_softc *ath_rate_attach(struct ath_hal *ah) +struct ath_rate_softc *ath_rate_attach(struct ath_softc *sc) { struct ath_rate_softc *asc; - /* we are only in user context so we can sleep for memory */ asc = kzalloc(sizeof(struct ath_rate_softc), GFP_KERNEL); if (asc == NULL) return NULL; - ar5416_attach_ratetables(asc); + asc->hw_rate_table[ATH9K_MODE_11B] = &ar5416_11b_ratetable; + asc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable; + asc->hw_rate_table[ATH9K_MODE_11G] = &ar5416_11g_ratetable; + + asc->hw_rate_table[ATH9K_MODE_11NA_HT20] = &ar5416_11na_ratetable; + asc->hw_rate_table[ATH9K_MODE_11NG_HT20] = &ar5416_11ng_ratetable; + + asc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS] = + &ar5416_11na_ratetable; + asc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS] = + &ar5416_11na_ratetable; + asc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS] = + &ar5416_11ng_ratetable; + asc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS] = + &ar5416_11ng_ratetable; /* Save Maximum TX Trigger Level (used for 11n) */ - tx_triglevel_max = ah->ah_caps.tx_triglevel_max; - /* return alias for ath_rate_softc * */ + tx_triglevel_max = sc->sc_ah->ah_caps.tx_triglevel_max; + return asc; } @@ -816,16 +719,6 @@ void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp) { struct ath_rate_softc *asc = sc->sc_rc; - /* For half and quarter rate channles use different - * rate tables - */ - if (sc->sc_ah->ah_curchan->channelFlags & CHANNEL_HALF) - ar5416_sethalf_ratetable(asc); - else if (sc->sc_ah->ah_curchan->channelFlags & CHANNEL_QUARTER) - ar5416_setquarter_ratetable(asc); - else /* full rate */ - ar5416_setfull_ratetable(asc); - if (avp->av_config.av_fixed_rateset != IEEE80211_FIXED_RATE_NONE) { asc->fixedrix = sc->sc_rixmap[avp->av_config.av_fixed_rateset & 0xff]; diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index 2166243045de..2d8df836d533 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -290,7 +290,7 @@ struct ath_tx_info_priv { /* * Attach/detach a rate control module. */ -struct ath_rate_softc *ath_rate_attach(struct ath_hal *ah); +struct ath_rate_softc *ath_rate_attach(struct ath_softc *sch); void ath_rate_detach(struct ath_rate_softc *asc); /* -- cgit v1.2.2 From 2b406f1e68dd5348384fd166ac532af46bfc87fc Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:05:35 +0530 Subject: ath9k: Nuke fixed rate handling in driver Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.c | 4 -- drivers/net/wireless/ath9k/core.h | 8 ---- drivers/net/wireless/ath9k/main.c | 8 ---- drivers/net/wireless/ath9k/rc.c | 92 ++------------------------------------- drivers/net/wireless/ath9k/rc.h | 29 +----------- 5 files changed, 4 insertions(+), 137 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c index bab9eaa18da4..ea332a2f18fe 100644 --- a/drivers/net/wireless/ath9k/core.c +++ b/drivers/net/wireless/ath9k/core.c @@ -89,13 +89,9 @@ static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) const struct ath9k_rate_table *rt; int i; - memset(sc->sc_rixmap, 0xff, sizeof(sc->sc_rixmap)); rt = ath9k_hw_getratetable(sc->sc_ah, mode); BUG_ON(!rt); - for (i = 0; i < rt->rateCount; i++) - sc->sc_rixmap[rt->info[i].rateCode] = (u8) i; - memset(sc->sc_hwmap, 0, sizeof(sc->sc_hwmap)); for (i = 0; i < 256; i++) { u8 ix = rt->rateCodeToIndex[i]; diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 69e8d3e41131..fe9dc99cc3e5 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -641,19 +641,12 @@ void ath_get_beaconconfig(struct ath_softc *sc, #define ATH_SET_VAP_BSSID_MASK(bssid_mask) \ ((bssid_mask)[0] &= ~(((ATH_BCBUF-1)<<2)|0x02)) -/* VAP configuration (from protocol layer) */ -struct ath_vap_config { - u32 av_fixed_rateset; - u32 av_fixed_retryset; -}; - /* driver-specific vap state */ struct ath_vap { int av_bslot; /* beacon slot index */ enum ath9k_opmode av_opmode; /* VAP operational mode */ struct ath_buf *av_bcbuf; /* beacon buffer */ struct ath_tx_control av_btxctl; /* txctl information for beacon */ - struct ath_vap_config av_config;/* vap configuration parameters*/ struct ath_rate_node *rc_node; }; @@ -915,7 +908,6 @@ struct ath_softc { /* Rate */ struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX]; const struct ath9k_rate_table *sc_currates; - u8 sc_rixmap[256]; /* IEEE to h/w rate table ix */ u8 sc_protrix; /* protection rate index */ struct { u32 rateKbps; /* transfer rate in kbs */ diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 4c2c58e2db47..60319d7ad24e 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -379,7 +379,6 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, "%s: Unable to set channel\n", __func__); - ath_rate_newstate(sc, avp); /* Update ratectrl about the new state */ ath_rc_node_update(hw, avp->rc_node); @@ -1099,10 +1098,6 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, /* Set the device opmode */ sc->sc_ah->ah_opmode = ic_opmode; - /* default VAP configuration */ - avp->av_config.av_fixed_rateset = IEEE80211_FIXED_RATE_NONE; - avp->av_config.av_fixed_retryset = 0x03030303; - if (conf->type == NL80211_IFTYPE_AP) { /* TODO: is this a suitable place to start ANI for AP mode? */ /* Start ANI */ @@ -1205,9 +1200,6 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, switch (vif->type) { case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_ADHOC: - /* Update ratectrl about the new state */ - ath_rate_newstate(sc, avp); - /* Set BSSID */ memcpy(sc->sc_curbssid, conf->bssid, ETH_ALEN); sc->sc_curaid = 0; diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index aafd10df9279..8a45b2502d23 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -709,27 +709,6 @@ u8 ath_rate_findrateix(struct ath_softc *sc, return 0; } -/* - * Update rate-control state on a device state change. When - * operating as a station this includes associate/reassociate - * with an AP. Otherwise this gets called, for example, when - * the we transition to run state when operating as an AP. - */ -void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp) -{ - struct ath_rate_softc *asc = sc->sc_rc; - - if (avp->av_config.av_fixed_rateset != IEEE80211_FIXED_RATE_NONE) { - asc->fixedrix = - sc->sc_rixmap[avp->av_config.av_fixed_rateset & 0xff]; - /* NB: check the fixed rate exists */ - if (asc->fixedrix == 0xff) - asc->fixedrix = IEEE80211_FIXED_RATE_NONE; - } else { - asc->fixedrix = IEEE80211_FIXED_RATE_NONE; - } -} - static u8 ath_rc_ratefind_ht(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv, const struct ath_rate_table *rate_table, @@ -1009,73 +988,11 @@ static void ath_rate_findrate(struct ath_softc *sc, int *is_probe, int is_retry) { - struct ath_vap *avp = ath_rc_priv->avp; - - DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); - if (!num_rates || !num_tries) return; - if (avp->av_config.av_fixed_rateset == IEEE80211_FIXED_RATE_NONE) { - ath_rc_ratefind(sc, ath_rc_priv, num_tries, num_rates, - rcflag, series, is_probe, is_retry); - } else { - /* Fixed rate */ - int idx; - u8 flags; - u32 rix; - struct ath_rate_softc *asc = ath_rc_priv->asc; - struct ath_rate_table *rate_table; - - rate_table = (struct ath_rate_table *) - asc->hw_rate_table[sc->sc_curmode]; - - for (idx = 0; idx < 4; idx++) { - unsigned int mcs; - u8 series_rix = 0; - - series[idx].tries = IEEE80211_RATE_IDX_ENTRY( - avp->av_config.av_fixed_retryset, idx); - - mcs = IEEE80211_RATE_IDX_ENTRY( - avp->av_config.av_fixed_rateset, idx); - - if (idx == 3 && (mcs & 0xf0) == 0x70) - mcs = (mcs & ~0xf0)|0x80; - - if (!(mcs & 0x80)) - flags = 0; - else - flags = ((ath_rc_priv->ht_cap & - WLAN_RC_DS_FLAG) ? - ATH_RC_DS_FLAG : 0) | - ((ath_rc_priv->ht_cap & - WLAN_RC_40_FLAG) ? - ATH_RC_CW40_FLAG : 0) | - ((ath_rc_priv->ht_cap & - WLAN_RC_SGI_FLAG) ? - ((ath_rc_priv->ht_cap & - WLAN_RC_40_FLAG) ? - ATH_RC_SGI_FLAG : 0) : 0); - - series[idx].rix = sc->sc_rixmap[mcs]; - series_rix = series[idx].rix; - - /* XXX: Give me some cleanup love */ - if ((flags & ATH_RC_CW40_FLAG) && - (flags & ATH_RC_SGI_FLAG)) - rix = rate_table->info[series_rix].ht_index; - else if (flags & ATH_RC_SGI_FLAG) - rix = rate_table->info[series_rix].sgi_index; - else if (flags & ATH_RC_CW40_FLAG) - rix = rate_table->info[series_rix].cw40index; - else - rix = rate_table->info[series_rix].base_index; - series[idx].max_4ms_framelen = - rate_table->info[rix].max_4ms_framelen; - series[idx].flags = flags; - } - } + ath_rc_ratefind(sc, ath_rc_priv, num_tries, num_rates, + rcflag, series, is_probe, is_retry); } static void ath_rc_update_ht(struct ath_softc *sc, @@ -1498,11 +1415,8 @@ static void ath_rate_tx_complete(struct ath_softc *sc, { int final_ts_idx = info_priv->tx.ts_rateindex; int tx_status = 0, is_underrun = 0; - struct ath_vap *avp; - avp = rc_priv->avp; - if ((avp->av_config.av_fixed_rateset != IEEE80211_FIXED_RATE_NONE) || - (info_priv->tx.ts_status & ATH9K_TXERR_FILT)) + if (info_priv->tx.ts_status & ATH9K_TXERR_FILT) return; if (info_priv->tx.ts_rssi > 0) { diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index 2d8df836d533..8d0650a510a2 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -60,16 +60,6 @@ struct ath_softc; #define ATH_RATE_MAX 30 -enum ieee80211_fixed_rate_mode { - IEEE80211_FIXED_RATE_NONE = 0, - IEEE80211_FIXED_RATE_MCS = 1 /* HT rates */ -}; - -/* - * Use the hal os glue code to get ms time - */ -#define IEEE80211_RATE_IDX_ENTRY(val, idx) (((val&(0xff<<(idx*8)))>>(idx*8))) - #define WLAN_PHY_HT_20_SS WLAN_RC_PHY_HT_20_SS #define WLAN_PHY_HT_20_DS WLAN_RC_PHY_HT_20_DS #define WLAN_PHY_HT_20_DS_HGI WLAN_RC_PHY_HT_20_DS_HGI @@ -287,27 +277,10 @@ struct ath_tx_info_priv { u8 min_rate; }; -/* - * Attach/detach a rate control module. - */ struct ath_rate_softc *ath_rate_attach(struct ath_softc *sch); void ath_rate_detach(struct ath_rate_softc *asc); - -/* - * Update/reset rate control state for 802.11 state transitions. - * Important mostly as the analog to ath_rate_newassoc when operating - * in station mode. - */ void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv); -void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp); - -/* - * Return rate index for given Dot11 Rate. - */ -u8 ath_rate_findrateix(struct ath_softc *sc, - u8 dot11_rate); - -/* Routines to register/unregister rate control algorithm */ +u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate); int ath_rate_control_register(void); void ath_rate_control_unregister(void); -- cgit v1.2.2 From be0418ada3fad110977a9d5fa16d4907d4e7d726 Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:05:55 +0530 Subject: ath9k: Revamp RX handling Remove a lot of old, crufty code and make RX status reporting a bit sane and clean. Do not do anything to the RX skb before unmapping. So in ath_rx_tasklet(), move the skb_put() after PCI unmap. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.h | 53 +--- drivers/net/wireless/ath9k/main.c | 100 ------- drivers/net/wireless/ath9k/recv.c | 575 ++++++++++++++------------------------ 3 files changed, 209 insertions(+), 519 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index fe9dc99cc3e5..5500ef49d8bb 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -279,13 +279,6 @@ struct ath_descdma { dma_addr_t dd_dmacontext; }; -/* Abstraction of a received RX MPDU/MMPDU, or a RX fragment */ - -struct ath_rx_context { - struct ath_buf *ctx_rxbuf; /* associated ath_buf for rx */ -}; -#define ATH_RX_CONTEXT(skb) ((struct ath_rx_context *)skb->cb) - int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, struct list_head *head, @@ -298,61 +291,21 @@ void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd, struct list_head *head); -/******/ -/* RX */ -/******/ +/***********/ +/* RX / TX */ +/***********/ #define ATH_MAX_ANTENNA 3 #define ATH_RXBUF 512 #define WME_NUM_TID 16 -/* per frame rx status block */ -struct ath_recv_status { - u64 tsf; /* mac tsf */ - int8_t rssi; /* RSSI (noise floor ajusted) */ - int8_t rssictl[ATH_MAX_ANTENNA]; /* RSSI (noise floor ajusted) */ - int8_t rssiextn[ATH_MAX_ANTENNA]; /* RSSI (noise floor ajusted) */ - int8_t abs_rssi; /* absolute RSSI */ - u8 rateieee; /* data rate received (IEEE rate code) */ - u8 ratecode; /* phy rate code */ - int rateKbps; /* data rate received (Kbps) */ - int antenna; /* rx antenna */ - int flags; /* status of associated skb */ -#define ATH_RX_FCS_ERROR 0x01 -#define ATH_RX_MIC_ERROR 0x02 -#define ATH_RX_DECRYPT_ERROR 0x04 -#define ATH_RX_RSSI_VALID 0x08 -/* if any of ctl,extn chainrssis are valid */ -#define ATH_RX_CHAIN_RSSI_VALID 0x10 -/* if extn chain rssis are valid */ -#define ATH_RX_RSSI_EXTN_VALID 0x20 -/* set if 40Mhz, clear if 20Mhz */ -#define ATH_RX_40MHZ 0x40 -/* set if short GI, clear if full GI */ -#define ATH_RX_SHORT_GI 0x80 -}; - -struct ath_rxbuf { - struct sk_buff *rx_wbuf; - unsigned long rx_time; /* system time when received */ - struct ath_recv_status rx_status; /* cached rx status */ -}; - int ath_startrecv(struct ath_softc *sc); bool ath_stoprecv(struct ath_softc *sc); void ath_flushrecv(struct ath_softc *sc); u32 ath_calcrxfilter(struct ath_softc *sc); -void ath_handle_rx_intr(struct ath_softc *sc); int ath_rx_init(struct ath_softc *sc, int nbufs); void ath_rx_cleanup(struct ath_softc *sc); int ath_rx_tasklet(struct ath_softc *sc, int flush); -int _ath_rx_indicate(struct ath_softc *sc, - struct sk_buff *skb, - struct ath_recv_status *status, - u16 keyix); -/******/ -/* TX */ -/******/ #define ATH_TXBUF 512 /* max number of transmit attempts (tries) */ diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 60319d7ad24e..c9ac5e8acffa 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -236,68 +236,6 @@ static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info) ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; } -static int ath_rate2idx(struct ath_softc *sc, int rate) -{ - int i = 0, cur_band, n_rates; - struct ieee80211_hw *hw = sc->hw; - - cur_band = hw->conf.channel->band; - n_rates = sc->sbands[cur_band].n_bitrates; - - for (i = 0; i < n_rates; i++) { - if (sc->sbands[cur_band].bitrates[i].bitrate == rate) - break; - } - - /* - * NB:mac80211 validates rx rate index against the supported legacy rate - * index only (should be done against ht rates also), return the highest - * legacy rate index for rx rate which does not match any one of the - * supported basic and extended rates to make mac80211 happy. - * The following hack will be cleaned up once the issue with - * the rx rate index validation in mac80211 is fixed. - */ - if (i == n_rates) - return n_rates - 1; - return i; -} - -static void ath9k_rx_prepare(struct ath_softc *sc, - struct sk_buff *skb, - struct ath_recv_status *status, - struct ieee80211_rx_status *rx_status) -{ - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_channel *curchan = hw->conf.channel; - - memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); - - rx_status->mactime = status->tsf; - rx_status->band = curchan->band; - rx_status->freq = curchan->center_freq; - rx_status->noise = sc->sc_ani.sc_noise_floor; - rx_status->signal = rx_status->noise + status->rssi; - rx_status->rate_idx = ath_rate2idx(sc, (status->rateKbps / 100)); - rx_status->antenna = status->antenna; - - /* at 45 you will be able to use MCS 15 reliably. A more elaborate - * scheme can be used here but it requires tables of SNR/throughput for - * each possible mode used. */ - rx_status->qual = status->rssi * 100 / 45; - - /* rssi can be more than 45 though, anything above that - * should be considered at 100% */ - if (rx_status->qual > 100) - rx_status->qual = 100; - - if (status->flags & ATH_RX_MIC_ERROR) - rx_status->flag |= RX_FLAG_MMIC_ERROR; - if (status->flags & ATH_RX_FCS_ERROR) - rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; - - rx_status->flag |= RX_FLAG_TSFT; -} - static void ath9k_ht_conf(struct ath_softc *sc, struct ieee80211_bss_conf *bss_conf) { @@ -440,44 +378,6 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, ieee80211_tx_status(hw, skb); } -int _ath_rx_indicate(struct ath_softc *sc, - struct sk_buff *skb, - struct ath_recv_status *status, - u16 keyix) -{ - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_rx_status rx_status; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - int hdrlen = ieee80211_get_hdrlen_from_skb(skb); - int padsize; - - /* see if any padding is done by the hw and remove it */ - if (hdrlen & 3) { - padsize = hdrlen % 4; - memmove(skb->data + padsize, skb->data, hdrlen); - skb_pull(skb, padsize); - } - - /* Prepare rx status */ - ath9k_rx_prepare(sc, skb, status, &rx_status); - - if (!(keyix == ATH9K_RXKEYIX_INVALID) && - !(status->flags & ATH_RX_DECRYPT_ERROR)) { - rx_status.flag |= RX_FLAG_DECRYPTED; - } else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) - && !(status->flags & ATH_RX_DECRYPT_ERROR) - && skb->len >= hdrlen + 4) { - keyix = skb->data[hdrlen + 3] >> 6; - - if (test_bit(keyix, sc->sc_keymap)) - rx_status.flag |= RX_FLAG_DECRYPTED; - } - - __ieee80211_rx(hw, skb, &rx_status); - - return 0; -} - /********************************/ /* LED functions */ /********************************/ diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 2d72ac19fada..000e189e104a 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -14,10 +14,6 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -/* - * Implementation of receive path. - */ - #include "core.h" /* @@ -27,10 +23,7 @@ * MAC acknowledges BA status as long as it copies frames to host * buffer (or rx fifo). This can incorrectly acknowledge packets * to a sender if last desc is self-linked. - * - * NOTE: Caller should hold the rxbuf lock. */ - static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) { struct ath_hal *ah = sc->sc_ah; @@ -40,19 +33,17 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) ATH_RXBUF_RESET(bf); ds = bf->bf_desc; - ds->ds_link = 0; /* link to null */ + ds->ds_link = 0; /* link to null */ ds->ds_data = bf->bf_buf_addr; - /* XXX For RADAR? - * virtual addr of the beginning of the buffer. */ + /* virtual addr of the beginning of the buffer. */ skb = bf->bf_mpdu; ASSERT(skb != NULL); ds->ds_vdata = skb->data; /* setup rx descriptors */ - ath9k_hw_setuprxdesc(ah, - ds, - skb_tailroom(skb), /* buffer size */ + ath9k_hw_setuprxdesc(ah, ds, + skb_tailroom(skb), /* buffer size */ 0); if (sc->sc_rxlink == NULL) @@ -64,8 +55,7 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) ath9k_hw_rxena(ah); } -static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, - u32 len) +static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, u32 len) { struct sk_buff *skb; u32 off; @@ -91,59 +81,154 @@ static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, return skb; } -static void ath_rx_requeue(struct ath_softc *sc, struct sk_buff *skb) +static void ath_rx_requeue(struct ath_softc *sc, struct ath_buf *bf) { - struct ath_buf *bf = ATH_RX_CONTEXT(skb)->ctx_rxbuf; + struct sk_buff *skb; ASSERT(bf != NULL); - spin_lock_bh(&sc->sc_rxbuflock); - if (bf->bf_status & ATH_BUFSTATUS_STALE) { - /* - * This buffer is still held for hw acess. - * Mark it as free to be re-queued it later. - */ - bf->bf_status |= ATH_BUFSTATUS_FREE; - } else { - /* XXX: we probably never enter here, remove after - * verification */ - list_add_tail(&bf->list, &sc->sc_rxbuf); - ath_rx_buf_link(sc, bf); + if (bf->bf_mpdu == NULL) { + skb = ath_rxbuf_alloc(sc, sc->sc_rxbufsize); + if (skb != NULL) { + bf->bf_mpdu = skb; + bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, + skb_end_pointer(skb) - skb->head, + PCI_DMA_FROMDEVICE); + bf->bf_dmacontext = bf->bf_buf_addr; + + } } - spin_unlock_bh(&sc->sc_rxbuflock); + + list_move_tail(&bf->list, &sc->sc_rxbuf); + ath_rx_buf_link(sc, bf); +} + + +static int ath_rate2idx(struct ath_softc *sc, int rate) +{ + int i = 0, cur_band, n_rates; + struct ieee80211_hw *hw = sc->hw; + + cur_band = hw->conf.channel->band; + n_rates = sc->sbands[cur_band].n_bitrates; + + for (i = 0; i < n_rates; i++) { + if (sc->sbands[cur_band].bitrates[i].bitrate == rate) + break; + } + + /* + * NB:mac80211 validates rx rate index against the supported legacy rate + * index only (should be done against ht rates also), return the highest + * legacy rate index for rx rate which does not match any one of the + * supported basic and extended rates to make mac80211 happy. + * The following hack will be cleaned up once the issue with + * the rx rate index validation in mac80211 is fixed. + */ + if (i == n_rates) + return n_rates - 1; + + return i; } /* - * The skb indicated to upper stack won't be returned to us. - * So we have to allocate a new one and queue it by ourselves. + * For Decrypt or Demic errors, we only mark packet status here and always push + * up the frame up to let mac80211 handle the actual error case, be it no + * decryption key or real decryption error. This let us keep statistics there. */ -static int ath_rx_indicate(struct ath_softc *sc, - struct sk_buff *skb, - struct ath_recv_status *status, - u16 keyix) +static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds, + struct ieee80211_rx_status *rx_status, bool *decrypt_error, + struct ath_softc *sc) { - struct ath_buf *bf = ATH_RX_CONTEXT(skb)->ctx_rxbuf; - struct sk_buff *nskb; - int type; - - /* indicate frame to the stack, which will free the old skb. */ - type = _ath_rx_indicate(sc, skb, status, keyix); - - /* allocate a new skb and queue it to for H/W processing */ - nskb = ath_rxbuf_alloc(sc, sc->sc_rxbufsize); - if (nskb != NULL) { - bf->bf_mpdu = nskb; - bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data, - skb_end_pointer(nskb) - nskb->head, - PCI_DMA_FROMDEVICE); - bf->bf_dmacontext = bf->bf_buf_addr; - ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf; + struct ieee80211_hdr *hdr; + int ratekbps; + u8 ratecode; + __le16 fc; + + hdr = (struct ieee80211_hdr *)skb->data; + fc = hdr->frame_control; + memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); + + if (ds->ds_rxstat.rs_more) { + /* + * Frame spans multiple descriptors; this cannot happen yet + * as we don't support jumbograms. If not in monitor mode, + * discard the frame. Enable this if you want to see + * error frames in Monitor mode. + */ + if (sc->sc_ah->ah_opmode != ATH9K_M_MONITOR) + goto rx_next; + } else if (ds->ds_rxstat.rs_status != 0) { + if (ds->ds_rxstat.rs_status & ATH9K_RXERR_CRC) + rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; + if (ds->ds_rxstat.rs_status & ATH9K_RXERR_PHY) + goto rx_next; - /* queue the new wbuf to H/W */ - ath_rx_requeue(sc, nskb); + if (ds->ds_rxstat.rs_status & ATH9K_RXERR_DECRYPT) { + *decrypt_error = true; + } else if (ds->ds_rxstat.rs_status & ATH9K_RXERR_MIC) { + if (ieee80211_is_ctl(fc)) + /* + * Sometimes, we get invalid + * MIC failures on valid control frames. + * Remove these mic errors. + */ + ds->ds_rxstat.rs_status &= ~ATH9K_RXERR_MIC; + else + rx_status->flag |= RX_FLAG_MMIC_ERROR; + } + /* + * Reject error frames with the exception of + * decryption and MIC failures. For monitor mode, + * we also ignore the CRC error. + */ + if (sc->sc_ah->ah_opmode == ATH9K_M_MONITOR) { + if (ds->ds_rxstat.rs_status & + ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | + ATH9K_RXERR_CRC)) + goto rx_next; + } else { + if (ds->ds_rxstat.rs_status & + ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) { + goto rx_next; + } + } } - return type; + ratecode = ds->ds_rxstat.rs_rate; + ratekbps = sc->sc_hwmap[ratecode].rateKbps; + + /* HT rate */ + if (ratecode & 0x80) { + if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040) + ratekbps = (ratekbps * 27) / 13; + if (ds->ds_rxstat.rs_flags & ATH9K_RX_GI) + ratekbps = (ratekbps * 10) / 9; + } + + rx_status->mactime = ath_extend_tsf(sc, ds->ds_rxstat.rs_tstamp); + rx_status->band = sc->hw->conf.channel->band; + rx_status->freq = sc->hw->conf.channel->center_freq; + rx_status->noise = sc->sc_ani.sc_noise_floor; + rx_status->signal = rx_status->noise + ds->ds_rxstat.rs_rssi; + rx_status->rate_idx = ath_rate2idx(sc, (ratekbps / 100)); + rx_status->antenna = ds->ds_rxstat.rs_antenna; + + /* at 45 you will be able to use MCS 15 reliably. A more elaborate + * scheme can be used here but it requires tables of SNR/throughput for + * each possible mode used. */ + rx_status->qual = ds->ds_rxstat.rs_rssi * 100 / 45; + + /* rssi can be more than 45 though, anything above that + * should be considered at 100% */ + if (rx_status->qual > 100) + rx_status->qual = 100; + + rx_status->flag |= RX_FLAG_TSFT; + + return 1; +rx_next: + return 0; } static void ath_opmode_init(struct ath_softc *sc) @@ -185,12 +270,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) sc->sc_flags &= ~SC_OP_RXFLUSH; spin_lock_init(&sc->sc_rxbuflock); - /* - * Cisco's VPN software requires that drivers be able to - * receive encapsulated frames that are larger than the MTU. - * Since we can't be sure how large a frame we'll get, setup - * to handle the larges on possible. - */ sc->sc_rxbufsize = roundup(IEEE80211_MAX_MPDU_LEN, min(sc->sc_cachelsz, (u16)64)); @@ -209,8 +288,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) break; } - /* Pre-allocate a wbuf for each rx buffer */ - list_for_each_entry(bf, &sc->sc_rxbuf, list) { skb = ath_rxbuf_alloc(sc, sc->sc_rxbufsize); if (skb == NULL) { @@ -223,7 +300,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) skb_end_pointer(skb) - skb->head, PCI_DMA_FROMDEVICE); bf->bf_dmacontext = bf->bf_buf_addr; - ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf; } sc->sc_rxlink = NULL; @@ -235,8 +311,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) return error; } -/* Reclaim all rx queue resources */ - void ath_rx_cleanup(struct ath_softc *sc) { struct sk_buff *skb; @@ -248,8 +322,6 @@ void ath_rx_cleanup(struct ath_softc *sc) dev_kfree_skb(skb); } - /* cleanup rx descriptors */ - if (sc->sc_rxdma.dd_desc_len != 0) ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf); } @@ -297,20 +369,19 @@ u32 ath_calcrxfilter(struct ath_softc *sc) } if (sc->sc_ah->ah_opmode == ATH9K_M_STA || - sc->sc_ah->ah_opmode == ATH9K_M_IBSS) + sc->sc_ah->ah_opmode == ATH9K_M_IBSS) rfilt |= ATH9K_RX_FILTER_BEACON; /* If in HOSTAP mode, want to enable reception of PSPOLL frames & beacon frames */ if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP) rfilt |= (ATH9K_RX_FILTER_BEACON | ATH9K_RX_FILTER_PSPOLL); + return rfilt; #undef RX_FILTER_PRESERVE } -/* Enable the receive h/w following a reset. */ - int ath_startrecv(struct ath_softc *sc) { struct ath_hal *ah = sc->sc_ah; @@ -322,21 +393,6 @@ int ath_startrecv(struct ath_softc *sc) sc->sc_rxlink = NULL; list_for_each_entry_safe(bf, tbf, &sc->sc_rxbuf, list) { - if (bf->bf_status & ATH_BUFSTATUS_STALE) { - /* restarting h/w, no need for holding descriptors */ - bf->bf_status &= ~ATH_BUFSTATUS_STALE; - /* - * Upper layer may not be done with the frame yet so - * we can't just re-queue it to hardware. Remove it - * from h/w queue. It'll be re-queued when upper layer - * returns the frame and ath_rx_requeue_mpdu is called. - */ - if (!(bf->bf_status & ATH_BUFSTATUS_FREE)) { - list_del(&bf->list); - continue; - } - } - /* chain descriptors */ ath_rx_buf_link(sc, bf); } @@ -346,120 +402,69 @@ int ath_startrecv(struct ath_softc *sc) bf = list_first_entry(&sc->sc_rxbuf, struct ath_buf, list); ath9k_hw_putrxbuf(ah, bf->bf_daddr); - ath9k_hw_rxena(ah); /* enable recv descriptors */ + ath9k_hw_rxena(ah); start_recv: spin_unlock_bh(&sc->sc_rxbuflock); - ath_opmode_init(sc); /* set filters, etc. */ - ath9k_hw_startpcureceive(ah); /* re-enable PCU/DMA engine */ + ath_opmode_init(sc); + ath9k_hw_startpcureceive(ah); + return 0; } -/* Disable the receive h/w in preparation for a reset. */ - bool ath_stoprecv(struct ath_softc *sc) { struct ath_hal *ah = sc->sc_ah; - u64 tsf; bool stopped; - ath9k_hw_stoppcurecv(ah); /* disable PCU */ - ath9k_hw_setrxfilter(ah, 0); /* clear recv filter */ - stopped = ath9k_hw_stopdmarecv(ah); /* disable DMA engine */ - mdelay(3); /* 3ms is long enough for 1 frame */ - tsf = ath9k_hw_gettsf64(ah); - sc->sc_rxlink = NULL; /* just in case */ + ath9k_hw_stoppcurecv(ah); + ath9k_hw_setrxfilter(ah, 0); + stopped = ath9k_hw_stopdmarecv(ah); + mdelay(3); /* 3ms is long enough for 1 frame */ + sc->sc_rxlink = NULL; + return stopped; } -/* Flush receive queue */ - void ath_flushrecv(struct ath_softc *sc) { - /* - * ath_rx_tasklet may be used to handle rx interrupt and flush receive - * queue at the same time. Use a lock to serialize the access of rx - * queue. - * ath_rx_tasklet cannot hold the spinlock while indicating packets. - * Instead, do not claim the spinlock but check for a flush in - * progress (see references to sc_rxflush) - */ spin_lock_bh(&sc->sc_rxflushlock); sc->sc_flags |= SC_OP_RXFLUSH; - ath_rx_tasklet(sc, 1); - sc->sc_flags &= ~SC_OP_RXFLUSH; spin_unlock_bh(&sc->sc_rxflushlock); } -/* Process receive queue, as well as LED, etc. */ - int ath_rx_tasklet(struct ath_softc *sc, int flush) { #define PA2DESC(_sc, _pa) \ ((struct ath_desc *)((caddr_t)(_sc)->sc_rxdma.dd_desc + \ ((_pa) - (_sc)->sc_rxdma.dd_desc_paddr))) - struct ath_buf *bf, *bf_held = NULL; + struct ath_buf *bf; struct ath_desc *ds; - struct ieee80211_hdr *hdr; struct sk_buff *skb = NULL; - struct ath_recv_status rx_status; + struct ieee80211_rx_status rx_status; struct ath_hal *ah = sc->sc_ah; - int type, rx_processed = 0; - u32 phyerr; - u8 chainreset = 0; - int retval; - __le16 fc; + struct ieee80211_hdr *hdr; + int hdrlen, padsize, retval; + bool decrypt_error = false; + u8 keyix; + + spin_lock_bh(&sc->sc_rxbuflock); do { /* If handling rx interrupt and flush is in progress => exit */ if ((sc->sc_flags & SC_OP_RXFLUSH) && (flush == 0)) break; - spin_lock_bh(&sc->sc_rxbuflock); if (list_empty(&sc->sc_rxbuf)) { sc->sc_rxlink = NULL; - spin_unlock_bh(&sc->sc_rxbuflock); break; } bf = list_first_entry(&sc->sc_rxbuf, struct ath_buf, list); - - /* - * There is a race condition that BH gets scheduled after sw - * writes RxE and before hw re-load the last descriptor to get - * the newly chained one. Software must keep the last DONE - * descriptor as a holding descriptor - software does so by - * marking it with the STALE flag. - */ - if (bf->bf_status & ATH_BUFSTATUS_STALE) { - bf_held = bf; - if (list_is_last(&bf_held->list, &sc->sc_rxbuf)) { - /* - * The holding descriptor is the last - * descriptor in queue. It's safe to - * remove the last holding descriptor - * in BH context. - */ - list_del(&bf_held->list); - bf_held->bf_status &= ~ATH_BUFSTATUS_STALE; - sc->sc_rxlink = NULL; - - if (bf_held->bf_status & ATH_BUFSTATUS_FREE) { - list_add_tail(&bf_held->list, - &sc->sc_rxbuf); - ath_rx_buf_link(sc, bf_held); - } - spin_unlock_bh(&sc->sc_rxbuflock); - break; - } - bf = list_entry(bf->list.next, struct ath_buf, list); - } - ds = bf->bf_desc; - ++rx_processed; /* * Must provide the virtual address of the current @@ -472,8 +477,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) * on. All this is necessary because of our use of * a self-linked list to avoid rx overruns. */ - retval = ath9k_hw_rxprocdesc(ah, - ds, + retval = ath9k_hw_rxprocdesc(ah, ds, bf->bf_daddr, PA2DESC(sc, ds->ds_link), 0); @@ -482,7 +486,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) struct ath_desc *tds; if (list_is_last(&bf->list, &sc->sc_rxbuf)) { - spin_unlock_bh(&sc->sc_rxbuflock); + sc->sc_rxlink = NULL; break; } @@ -500,215 +504,70 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) */ tds = tbf->bf_desc; - retval = ath9k_hw_rxprocdesc(ah, - tds, tbf->bf_daddr, - PA2DESC(sc, tds->ds_link), 0); + retval = ath9k_hw_rxprocdesc(ah, tds, tbf->bf_daddr, + PA2DESC(sc, tds->ds_link), 0); if (retval == -EINPROGRESS) { - spin_unlock_bh(&sc->sc_rxbuflock); break; } } - /* XXX: we do not support frames spanning - * multiple descriptors */ - bf->bf_status |= ATH_BUFSTATUS_DONE; - skb = bf->bf_mpdu; - if (skb == NULL) { /* XXX ??? can this happen */ - spin_unlock_bh(&sc->sc_rxbuflock); + if (!skb) continue; - } - /* - * Now we know it's a completed frame, we can indicate the - * frame. Remove the previous holding descriptor and leave - * this one in the queue as the new holding descriptor. - */ - if (bf_held) { - list_del(&bf_held->list); - bf_held->bf_status &= ~ATH_BUFSTATUS_STALE; - if (bf_held->bf_status & ATH_BUFSTATUS_FREE) { - list_add_tail(&bf_held->list, &sc->sc_rxbuf); - /* try to requeue this descriptor */ - ath_rx_buf_link(sc, bf_held); - } - } - bf->bf_status |= ATH_BUFSTATUS_STALE; - bf_held = bf; /* - * Release the lock here in case ieee80211_input() return - * the frame immediately by calling ath_rx_mpdu_requeue(). + * If we're asked to flush receive queue, directly + * chain it back at the queue without processing it. */ - spin_unlock_bh(&sc->sc_rxbuflock); - - if (flush) { - /* - * If we're asked to flush receive queue, directly - * chain it back at the queue without processing it. - */ + if (flush) goto rx_next; - } - hdr = (struct ieee80211_hdr *)skb->data; - fc = hdr->frame_control; - memset(&rx_status, 0, sizeof(struct ath_recv_status)); - - if (ds->ds_rxstat.rs_more) { - /* - * Frame spans multiple descriptors; this - * cannot happen yet as we don't support - * jumbograms. If not in monitor mode, - * discard the frame. - */ -#ifndef ERROR_FRAMES - /* - * Enable this if you want to see - * error frames in Monitor mode. - */ - if (sc->sc_ah->ah_opmode != ATH9K_M_MONITOR) - goto rx_next; -#endif - /* fall thru for monitor mode handling... */ - } else if (ds->ds_rxstat.rs_status != 0) { - if (ds->ds_rxstat.rs_status & ATH9K_RXERR_CRC) - rx_status.flags |= ATH_RX_FCS_ERROR; - if (ds->ds_rxstat.rs_status & ATH9K_RXERR_PHY) { - phyerr = ds->ds_rxstat.rs_phyerr & 0x1f; - goto rx_next; - } + if (!ds->ds_rxstat.rs_datalen) + goto rx_next; - if (ds->ds_rxstat.rs_status & ATH9K_RXERR_DECRYPT) { - /* - * Decrypt error. We only mark packet status - * here and always push up the frame up to let - * mac80211 handle the actual error case, be - * it no decryption key or real decryption - * error. This let us keep statistics there. - */ - rx_status.flags |= ATH_RX_DECRYPT_ERROR; - } else if (ds->ds_rxstat.rs_status & ATH9K_RXERR_MIC) { - /* - * Demic error. We only mark frame status here - * and always push up the frame up to let - * mac80211 handle the actual error case. This - * let us keep statistics there. Hardware may - * post a false-positive MIC error. - */ - if (ieee80211_is_ctl(fc)) - /* - * Sometimes, we get invalid - * MIC failures on valid control frames. - * Remove these mic errors. - */ - ds->ds_rxstat.rs_status &= - ~ATH9K_RXERR_MIC; - else - rx_status.flags |= ATH_RX_MIC_ERROR; - } - /* - * Reject error frames with the exception of - * decryption and MIC failures. For monitor mode, - * we also ignore the CRC error. - */ - if (sc->sc_ah->ah_opmode == ATH9K_M_MONITOR) { - if (ds->ds_rxstat.rs_status & - ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | - ATH9K_RXERR_CRC)) - goto rx_next; - } else { - if (ds->ds_rxstat.rs_status & - ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) { - goto rx_next; - } - } - } - /* - * The status portion of the descriptor could get corrupted. - */ + /* The status portion of the descriptor could get corrupted. */ if (sc->sc_rxbufsize < ds->ds_rxstat.rs_datalen) goto rx_next; - /* - * Sync and unmap the frame. At this point we're - * committed to passing the sk_buff somewhere so - * clear buf_skb; this means a new sk_buff must be - * allocated when the rx descriptor is setup again - * to receive another frame. - */ - skb_put(skb, ds->ds_rxstat.rs_datalen); - skb->protocol = cpu_to_be16(ETH_P_CONTROL); - rx_status.tsf = ath_extend_tsf(sc, ds->ds_rxstat.rs_tstamp); - rx_status.rateieee = - sc->sc_hwmap[ds->ds_rxstat.rs_rate].ieeerate; - rx_status.rateKbps = - sc->sc_hwmap[ds->ds_rxstat.rs_rate].rateKbps; - rx_status.ratecode = ds->ds_rxstat.rs_rate; - - /* HT rate */ - if (rx_status.ratecode & 0x80) { - /* TODO - add table to avoid division */ - if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040) { - rx_status.flags |= ATH_RX_40MHZ; - rx_status.rateKbps = - (rx_status.rateKbps * 27) / 13; - } - if (ds->ds_rxstat.rs_flags & ATH9K_RX_GI) - rx_status.rateKbps = - (rx_status.rateKbps * 10) / 9; - else - rx_status.flags |= ATH_RX_SHORT_GI; - } - /* sc_noise_floor is only available when the station - attaches to an AP, so we use a default value - if we are not yet attached. */ - rx_status.abs_rssi = - ds->ds_rxstat.rs_rssi + sc->sc_ani.sc_noise_floor; + if (!ath_rx_prepare(skb, ds, &rx_status, &decrypt_error, sc)) + goto rx_next; - pci_dma_sync_single_for_cpu(sc->pdev, - bf->bf_buf_addr, + /* Sync and unmap the frame */ + pci_dma_sync_single_for_cpu(sc->pdev, bf->bf_buf_addr, skb_tailroom(skb), PCI_DMA_FROMDEVICE); - pci_unmap_single(sc->pdev, - bf->bf_buf_addr, + pci_unmap_single(sc->pdev, bf->bf_buf_addr, sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); - /* XXX: Ah! make me more readable, use a helper */ - if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) { - if (ds->ds_rxstat.rs_moreaggr == 0) { - rx_status.rssictl[0] = - ds->ds_rxstat.rs_rssi_ctl0; - rx_status.rssictl[1] = - ds->ds_rxstat.rs_rssi_ctl1; - rx_status.rssictl[2] = - ds->ds_rxstat.rs_rssi_ctl2; - rx_status.rssi = ds->ds_rxstat.rs_rssi; - if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040) { - rx_status.rssiextn[0] = - ds->ds_rxstat.rs_rssi_ext0; - rx_status.rssiextn[1] = - ds->ds_rxstat.rs_rssi_ext1; - rx_status.rssiextn[2] = - ds->ds_rxstat.rs_rssi_ext2; - rx_status.flags |= - ATH_RX_RSSI_EXTN_VALID; - } - rx_status.flags |= ATH_RX_RSSI_VALID | - ATH_RX_CHAIN_RSSI_VALID; - } - } else { - /* - * Need to insert the "combined" rssi into the - * status structure for upper layer processing - */ - rx_status.rssi = ds->ds_rxstat.rs_rssi; - rx_status.flags |= ATH_RX_RSSI_VALID; + skb_put(skb, ds->ds_rxstat.rs_datalen); + skb->protocol = cpu_to_be16(ETH_P_CONTROL); + + /* see if any padding is done by the hw and remove it */ + hdr = (struct ieee80211_hdr *)skb->data; + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + + if (hdrlen & 3) { + padsize = hdrlen % 4; + memmove(skb->data + padsize, skb->data, hdrlen); + skb_pull(skb, padsize); } - /* Pass frames up to the stack. */ + keyix = ds->ds_rxstat.rs_keyix; - type = ath_rx_indicate(sc, skb, - &rx_status, ds->ds_rxstat.rs_keyix); + if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) { + rx_status.flag |= RX_FLAG_DECRYPTED; + } else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) + && !decrypt_error && skb->len >= hdrlen + 4) { + keyix = skb->data[hdrlen + 3] >> 6; + + if (test_bit(keyix, sc->sc_keymap)) + rx_status.flag |= RX_FLAG_DECRYPTED; + } + + /* Send the frame to mac80211 */ + __ieee80211_rx(sc->hw, skb, &rx_status); + bf->bf_mpdu = NULL; /* * change the default rx antenna if rx diversity chooses the @@ -716,37 +575,15 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) */ if (sc->sc_defant != ds->ds_rxstat.rs_antenna) { if (++sc->sc_rxotherant >= 3) - ath_setdefantenna(sc, - ds->ds_rxstat.rs_antenna); + ath_setdefantenna(sc, ds->ds_rxstat.rs_antenna); } else { sc->sc_rxotherant = 0; } - -#ifdef CONFIG_SLOW_ANT_DIV - if ((rx_status.flags & ATH_RX_RSSI_VALID) && - ieee80211_is_beacon(fc)) { - ath_slow_ant_div(&sc->sc_antdiv, hdr, &ds->ds_rxstat); - } -#endif - /* - * For frames successfully indicated, the buffer will be - * returned to us by upper layers by calling - * ath_rx_mpdu_requeue, either synchronusly or asynchronously. - * So we don't want to do it here in this loop. - */ - continue; - rx_next: - bf->bf_status |= ATH_BUFSTATUS_FREE; - } while (TRUE); - - if (chainreset) { - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: Reset rx chain mask. " - "Do internal reset\n", __func__); - ASSERT(flush == 0); - ath_reset(sc, false); - } + ath_rx_requeue(sc, bf); + } while (1); + + spin_unlock_bh(&sc->sc_rxbuflock); return 0; #undef PA2DESC -- cgit v1.2.2 From ffd651c620a2f27502ee5d4517a122c072f13073 Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:06:18 +0530 Subject: ath9k: We don't support non-HT devices, so remove superfluous code. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/xmit.c | 39 --------------------------------------- 1 file changed, 39 deletions(-) diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 8937728b0301..44735b6d9f04 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -14,10 +14,6 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -/* - * Implementation of transmit path. - */ - #include "core.h" #define BITS_PER_BYTE 8 @@ -698,41 +694,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS; } - /* - * For non-HT devices, calculate RTS/CTS duration in software - * and disable multi-rate retry. - */ - if (flags && !(ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)) { - /* - * Compute the transmit duration based on the frame - * size and the size of an ACK frame. We call into the - * HAL to do the computation since it depends on the - * characteristics of the actual PHY being used. - * - * NB: CTS is assumed the same size as an ACK so we can - * use the precalculated ACK durations. - */ - if (flags & ATH9K_TXDESC_RTSENA) { /* SIFS + CTS */ - ctsduration += bf_isshpreamble(bf) ? - rt->info[cix].spAckDuration : - rt->info[cix].lpAckDuration; - } - - ctsduration += series[0].PktDuration; - - if ((bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { /* SIFS + ACK */ - ctsduration += bf_isshpreamble(bf) ? - rt->info[rix].spAckDuration : - rt->info[rix].lpAckDuration; - } - - /* - * Disable multi-rate retry when using RTS/CTS by clearing - * series 1, 2 and 3. - */ - memset(&series[1], 0, sizeof(struct ath9k_11n_rate_series) * 3); - } - /* * set dur_update_en for l-sig computation except for PS-Poll frames */ -- cgit v1.2.2 From 5ddfac3b550250388f1222ec7d09069784a68af6 Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:06:44 +0530 Subject: ath9k: Remove rate control reference in VAP Rate control init is now confined to itself, using the HT capabilites of the STA from rate_init(). Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.h | 47 +++++++++++----------- drivers/net/wireless/ath9k/main.c | 4 -- drivers/net/wireless/ath9k/rc.c | 82 +++++++++++++-------------------------- drivers/net/wireless/ath9k/rc.h | 2 - 4 files changed, 50 insertions(+), 85 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 5500ef49d8bb..2ff33b80b485 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -540,6 +540,29 @@ void ath_newassoc(struct ath_softc *sc, void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta); void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta); +/********/ +/* VAPs */ +/********/ + +/* + * Define the scheme that we select MAC address for multiple + * BSS on the same radio. The very first VAP will just use the MAC + * address from the EEPROM. For the next 3 VAPs, we set the + * U/L bit (bit 1) in MAC address, and use the next two bits as the + * index of the VAP. + */ + +#define ATH_SET_VAP_BSSID_MASK(bssid_mask) \ + ((bssid_mask)[0] &= ~(((ATH_BCBUF-1)<<2)|0x02)) + +/* driver-specific vap state */ +struct ath_vap { + int av_bslot; /* beacon slot index */ + enum ath9k_opmode av_opmode; /* VAP operational mode */ + struct ath_buf *av_bcbuf; /* beacon buffer */ + struct ath_tx_control av_btxctl; /* txctl information for beacon */ +}; + /*******************/ /* Beacon Handling */ /*******************/ @@ -579,30 +602,6 @@ void ath_beacon_sync(struct ath_softc *sc, int if_id); void ath_get_beaconconfig(struct ath_softc *sc, int if_id, struct ath_beacon_config *conf); -/********/ -/* VAPs */ -/********/ - -/* - * Define the scheme that we select MAC address for multiple - * BSS on the same radio. The very first VAP will just use the MAC - * address from the EEPROM. For the next 3 VAPs, we set the - * U/L bit (bit 1) in MAC address, and use the next two bits as the - * index of the VAP. - */ - -#define ATH_SET_VAP_BSSID_MASK(bssid_mask) \ - ((bssid_mask)[0] &= ~(((ATH_BCBUF-1)<<2)|0x02)) - -/* driver-specific vap state */ -struct ath_vap { - int av_bslot; /* beacon slot index */ - enum ath9k_opmode av_opmode; /* VAP operational mode */ - struct ath_buf *av_bcbuf; /* beacon buffer */ - struct ath_tx_control av_btxctl; /* txctl information for beacon */ - struct ath_rate_node *rc_node; -}; - /*********************/ /* Antenna diversity */ /*********************/ diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index c9ac5e8acffa..7b843820fa66 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -316,10 +316,6 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to set channel\n", __func__); - - /* Update ratectrl about the new state */ - ath_rc_node_update(hw, avp->rc_node); - /* Start ANI */ mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL)); diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 8a45b2502d23..0fa1b30bdcb6 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -1446,35 +1446,39 @@ static void ath_rate_tx_complete(struct ath_softc *sc, info_priv->tx.ts_longretry); } -/* - * Update the SIB's rate control information - * - * This should be called when the supported rates change - * (e.g. SME operation, wireless mode change) - * - * It will determine which rates are valid for use. - */ -static void ath_rc_sib_update(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - u32 capflag, int keep_state, - struct ath_rateset *negotiated_rates, - struct ath_rateset *negotiated_htrates) +static void ath_rc_init(struct ath_softc *sc, + struct ath_rate_node *ath_rc_priv, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta) { struct ath_rate_table *rate_table = NULL; struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; - struct ath_rateset *rateset = negotiated_rates; - u8 *ht_mcs = (u8 *)negotiated_htrates; + struct ath_rateset *rateset = &ath_rc_priv->neg_rates; + u8 *ht_mcs = (u8 *)&ath_rc_priv->neg_ht_rates; u8 i, j, k, hi = 0, hthi = 0; rate_table = (struct ath_rate_table *) asc->hw_rate_table[sc->sc_curmode]; + if (sta->ht_cap.ht_supported) { + if (sband->band == IEEE80211_BAND_2GHZ) + rate_table = (struct ath_rate_table *) + asc->hw_rate_table[ATH9K_MODE_11NG_HT20]; + else + rate_table = (struct ath_rate_table *) + asc->hw_rate_table[ATH9K_MODE_11NA_HT20]; + + ath_rc_priv->ht_cap = (WLAN_RC_HT_FLAG | WLAN_RC_DS_FLAG); + if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) + ath_rc_priv->ht_cap |= WLAN_RC_40_FLAG; + } + /* Initial rate table size. Will change depending * on the working rate set */ ath_rc_priv->rate_table_size = MAX_TX_RATE_TBL; /* Initialize thresholds according to the global rate table */ - for (i = 0 ; (i < ath_rc_priv->rate_table_size) && (!keep_state); i++) { + for (i = 0 ; i < ath_rc_priv->rate_table_size; i++) { ath_rc_priv->state[i].rssi_thres = rate_table->info[i].rssi_ack_validmin; ath_rc_priv->state[i].per = 0; @@ -1488,24 +1492,24 @@ static void ath_rc_sib_update(struct ath_softc *sc, ath_rc_priv->valid_phy_rateidx[i][j] = 0; ath_rc_priv->valid_phy_ratecnt[i] = 0; } - ath_rc_priv->rc_phy_mode = (capflag & WLAN_RC_40_FLAG); + ath_rc_priv->rc_phy_mode = (ath_rc_priv->ht_cap & WLAN_RC_40_FLAG); /* Set stream capability */ - ath_rc_priv->single_stream = (capflag & WLAN_RC_DS_FLAG) ? 0 : 1; + ath_rc_priv->single_stream = (ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ? 0 : 1; if (!rateset->rs_nrates) { /* No working rate, just initialize valid rates */ hi = ath_rc_sib_init_validrates(ath_rc_priv, rate_table, - capflag); + ath_rc_priv->ht_cap); } else { /* Use intersection of working rates and valid rates */ hi = ath_rc_sib_setvalid_rates(ath_rc_priv, rate_table, - rateset, capflag); - if (capflag & WLAN_RC_HT_FLAG) { + rateset, ath_rc_priv->ht_cap); + if (ath_rc_priv->ht_cap & WLAN_RC_HT_FLAG) { hthi = ath_rc_sib_setvalid_htrates(ath_rc_priv, rate_table, ht_mcs, - capflag); + ath_rc_priv->ht_cap); } hi = A_MAX(hi, hthi); } @@ -1539,29 +1543,6 @@ static void ath_rc_sib_update(struct ath_softc *sc, ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4]; } -void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv) -{ - struct ath_softc *sc = hw->priv; - u32 capflag = 0; - - if (hw->conf.ht.enabled) { - capflag |= ATH_RC_HT_FLAG | ATH_RC_DS_FLAG; - if (sc->sc_ht_info.tx_chan_width == ATH9K_HT_MACMODE_2040) - capflag |= ATH_RC_CW40_FLAG; - } - - rc_priv->ht_cap = - ((capflag & ATH_RC_DS_FLAG) ? WLAN_RC_DS_FLAG : 0) | - ((capflag & ATH_RC_SGI_FLAG) ? WLAN_RC_SGI_FLAG : 0) | - ((capflag & ATH_RC_HT_FLAG) ? WLAN_RC_HT_FLAG : 0) | - ((capflag & ATH_RC_CW40_FLAG) ? WLAN_RC_40_FLAG : 0); - - - ath_rc_sib_update(sc, rc_priv, rc_priv->ht_cap, 0, - &rc_priv->neg_rates, - &rc_priv->neg_ht_rates); -} - /* Rate Control callbacks */ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta, @@ -1684,7 +1665,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, ath_rc_priv->neg_ht_rates.rs_nrates = j; } - ath_rc_node_update(sc->hw, priv_sta); + ath_rc_init(sc, priv_sta, sband, sta); } static void *ath_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) @@ -1699,16 +1680,9 @@ static void ath_rate_free(void *priv) static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp) { - struct ieee80211_vif *vif; struct ath_softc *sc = priv; - struct ath_vap *avp; struct ath_rate_node *rate_priv; - vif = sc->sc_vaps[0]; - ASSERT(vif); - - avp = (void *)vif->drv_priv; - rate_priv = kzalloc(sizeof(struct ath_rate_node), gfp); if (!rate_priv) { DPRINTF(sc, ATH_DBG_FATAL, @@ -1717,9 +1691,7 @@ static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp return NULL; } - rate_priv->avp = avp; rate_priv->asc = sc->sc_rc; - avp->rc_node = rate_priv; rate_priv->rssi_down_time = jiffies_to_msecs(jiffies); return rate_priv; diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index 8d0650a510a2..07319c6c2e02 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -265,7 +265,6 @@ struct ath_rate_node { struct ath_rateset neg_rates; struct ath_rateset neg_ht_rates; struct ath_rate_softc *asc; - struct ath_vap *avp; }; /* Driver data of ieee80211_tx_info */ @@ -279,7 +278,6 @@ struct ath_tx_info_priv { struct ath_rate_softc *ath_rate_attach(struct ath_softc *sch); void ath_rate_detach(struct ath_rate_softc *asc); -void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv); u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate); int ath_rate_control_register(void); void ath_rate_control_unregister(void); -- cgit v1.2.2 From fe7f4a77450c1d0e463a9b1456b40c2305433e41 Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:07:06 +0530 Subject: ath9k: Remove ath_rate_softc Move the hw rate tables to ath_softc, and access them directly. tx_triglevel_max is global, move it to ath_rate_node. Now that ath_rate_softc is gone, rate control attach becomes simpler. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.c | 6 +-- drivers/net/wireless/ath9k/core.h | 2 +- drivers/net/wireless/ath9k/main.c | 1 - drivers/net/wireless/ath9k/rc.c | 110 ++++++++++++++------------------------ drivers/net/wireless/ath9k/rc.h | 13 +---- 5 files changed, 45 insertions(+), 87 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c index ea332a2f18fe..6c872e704b93 100644 --- a/drivers/net/wireless/ath9k/core.c +++ b/drivers/net/wireless/ath9k/core.c @@ -1071,11 +1071,7 @@ int ath_init(u16 devid, struct ath_softc *sc) sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR; setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc); - sc->sc_rc = ath_rate_attach(sc); - if (sc->sc_rc == NULL) { - error = -EIO; - goto bad2; - } + ath_rate_attach(sc); if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, ATH9K_CIPHER_TKIP, NULL)) { diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 2ff33b80b485..cf2d9410b3dd 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -784,7 +784,6 @@ struct ath_softc { struct tasklet_struct bcon_tasklet; struct ath_config sc_config; struct ath_hal *sc_ah; - struct ath_rate_softc *sc_rc; void __iomem *mem; u8 sc_curbssid[ETH_ALEN]; @@ -859,6 +858,7 @@ struct ath_softc { /* Rate */ struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX]; + struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX]; const struct ath9k_rate_table *sc_currates; u8 sc_protrix; /* protection rate index */ struct { diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 7b843820fa66..ca7809836c33 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -737,7 +737,6 @@ static void ath_detach(struct ath_softc *sc) ieee80211_unregister_hw(hw); ath_rate_control_unregister(); - ath_rate_detach(sc->sc_rc); ath_rx_cleanup(sc); ath_tx_cleanup(sc); diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 0fa1b30bdcb6..59c146cdd0db 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -23,8 +23,6 @@ /* FIXME: remove this include! */ #include "../net/mac80211/rate.h" -static u32 tx_triglevel_max; - static struct ath_rate_table ar5416_11na_ratetable = { 42, { @@ -436,7 +434,7 @@ static inline int8_t median(int8_t a, int8_t b, int8_t c) } } -static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table, +static void ath_rc_sort_validrates(struct ath_rate_table *rate_table, struct ath_rate_node *ath_rc_priv) { u8 i, j, idx, idx_next; @@ -481,7 +479,7 @@ static inline int ath_rc_isvalid_txmask(struct ath_rate_node *ath_rc_priv, /* Iterators for valid_txrate_mask */ static inline int -ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table, +ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, struct ath_rate_node *ath_rc_priv, u8 cur_valid_txrate, u8 *next_idx) @@ -519,7 +517,7 @@ static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw) } static inline int -ath_rc_get_nextlowervalid_txrate(const struct ath_rate_table *rate_table, +ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table, struct ath_rate_node *ath_rc_priv, u8 cur_valid_txrate, u8 *next_idx) { @@ -539,7 +537,7 @@ ath_rc_get_nextlowervalid_txrate(const struct ath_rate_table *rate_table, */ static u8 ath_rc_sib_init_validrates(struct ath_rate_node *ath_rc_priv, - const struct ath_rate_table *rate_table, + struct ath_rate_table *rate_table, u32 capflag) { u8 i, hi = 0; @@ -572,7 +570,7 @@ ath_rc_sib_init_validrates(struct ath_rate_node *ath_rc_priv, */ static u8 ath_rc_sib_setvalid_rates(struct ath_rate_node *ath_rc_priv, - const struct ath_rate_table *rate_table, + struct ath_rate_table *rate_table, struct ath_rateset *rateset, u32 capflag) { @@ -620,7 +618,7 @@ ath_rc_sib_setvalid_rates(struct ath_rate_node *ath_rc_priv, static u8 ath_rc_sib_setvalid_htrates(struct ath_rate_node *ath_rc_priv, - const struct ath_rate_table *rate_table, + struct ath_rate_table *rate_table, u8 *mcs_set, u32 capflag) { u8 i, j, hi = 0; @@ -653,50 +651,13 @@ ath_rc_sib_setvalid_htrates(struct ath_rate_node *ath_rc_priv, return hi; } -struct ath_rate_softc *ath_rate_attach(struct ath_softc *sc) -{ - struct ath_rate_softc *asc; - - asc = kzalloc(sizeof(struct ath_rate_softc), GFP_KERNEL); - if (asc == NULL) - return NULL; - - asc->hw_rate_table[ATH9K_MODE_11B] = &ar5416_11b_ratetable; - asc->hw_rate_table[ATH9K_MODE_11A] = &ar5416_11a_ratetable; - asc->hw_rate_table[ATH9K_MODE_11G] = &ar5416_11g_ratetable; - - asc->hw_rate_table[ATH9K_MODE_11NA_HT20] = &ar5416_11na_ratetable; - asc->hw_rate_table[ATH9K_MODE_11NG_HT20] = &ar5416_11ng_ratetable; - - asc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS] = - &ar5416_11na_ratetable; - asc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS] = - &ar5416_11na_ratetable; - asc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS] = - &ar5416_11ng_ratetable; - asc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS] = - &ar5416_11ng_ratetable; - - /* Save Maximum TX Trigger Level (used for 11n) */ - tx_triglevel_max = sc->sc_ah->ah_caps.tx_triglevel_max; - - return asc; -} - -void ath_rate_detach(struct ath_rate_softc *asc) -{ - if (asc != NULL) - kfree(asc); -} - u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11rate) { - const struct ath_rate_table *ratetable; - struct ath_rate_softc *rsc = sc->sc_rc; + struct ath_rate_table *ratetable; int i; - ratetable = rsc->hw_rate_table[sc->sc_curmode]; + ratetable = sc->hw_rate_table[sc->sc_curmode]; if (WARN_ON(!ratetable)) return 0; @@ -711,7 +672,7 @@ u8 ath_rate_findrateix(struct ath_softc *sc, static u8 ath_rc_ratefind_ht(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv, - const struct ath_rate_table *rate_table, + struct ath_rate_table *rate_table, int probe_allowed, int *is_probing, int is_retry) { @@ -843,7 +804,7 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, return rate; } -static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table , +static void ath_rc_rate_set_series(struct ath_rate_table *rate_table , struct ath_rc_series *series, u8 tries, u8 rix, @@ -864,7 +825,7 @@ static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table , static u8 ath_rc_rate_getidx(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv, - const struct ath_rate_table *rate_table, + struct ath_rate_table *rate_table, u8 rix, u16 stepdown, u16 min_rate) { @@ -898,11 +859,9 @@ static void ath_rc_ratefind(struct ath_softc *sc, int is_retry) { u8 try_per_rate = 0, i = 0, rix, nrix; - struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; struct ath_rate_table *rate_table; - rate_table = - (struct ath_rate_table *)asc->hw_rate_table[sc->sc_curmode]; + rate_table = sc->hw_rate_table[sc->sc_curmode]; rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, (rcflag & ATH_RC_PROBE_ALLOWED) ? 1 : 0, is_probe, is_retry); @@ -1003,10 +962,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, u32 now_msec = jiffies_to_msecs(jiffies); int state_change = FALSE, rate, count; u8 last_per; - struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; - struct ath_rate_table *rate_table = - (struct ath_rate_table *)asc->hw_rate_table[sc->sc_curmode]; - + struct ath_rate_table *rate_table = sc->hw_rate_table[sc->sc_curmode]; static u32 nretry_to_per_lookup[10] = { 100 * 0 / 1, 100 * 1 / 4, @@ -1330,15 +1286,13 @@ static void ath_rc_update(struct ath_softc *sc, struct ath_tx_info_priv *info_priv, int final_ts_idx, int xretries, int long_retry) { - struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; struct ath_rate_table *rate_table; struct ath_rc_series rcs[4]; u8 flags; u32 series = 0, rix; memcpy(rcs, info_priv->rcs, 4 * sizeof(rcs[0])); - rate_table = (struct ath_rate_table *) - asc->hw_rate_table[sc->sc_curmode]; + rate_table = sc->hw_rate_table[sc->sc_curmode]; ASSERT(rcs[0].tries != 0); /* @@ -1432,7 +1386,7 @@ static void ath_rate_tx_complete(struct ath_softc *sc, */ if (info_priv->tx.ts_flags & (ATH9K_TX_DATA_UNDERRUN | ATH9K_TX_DELIM_UNDERRUN) && - ((sc->sc_ah->ah_txTrigLevel) >= tx_triglevel_max)) { + ((sc->sc_ah->ah_txTrigLevel) >= rc_priv->tx_triglevel_max)) { tx_status = 1; is_underrun = 1; } @@ -1452,21 +1406,17 @@ static void ath_rc_init(struct ath_softc *sc, struct ieee80211_sta *sta) { struct ath_rate_table *rate_table = NULL; - struct ath_rate_softc *asc = (struct ath_rate_softc *)sc->sc_rc; struct ath_rateset *rateset = &ath_rc_priv->neg_rates; u8 *ht_mcs = (u8 *)&ath_rc_priv->neg_ht_rates; u8 i, j, k, hi = 0, hthi = 0; - rate_table = (struct ath_rate_table *) - asc->hw_rate_table[sc->sc_curmode]; + rate_table = sc->hw_rate_table[sc->sc_curmode]; if (sta->ht_cap.ht_supported) { if (sband->band == IEEE80211_BAND_2GHZ) - rate_table = (struct ath_rate_table *) - asc->hw_rate_table[ATH9K_MODE_11NG_HT20]; + rate_table = sc->hw_rate_table[ATH9K_MODE_11NG_HT20]; else - rate_table = (struct ath_rate_table *) - asc->hw_rate_table[ATH9K_MODE_11NA_HT20]; + rate_table = sc->hw_rate_table[ATH9K_MODE_11NA_HT20]; ath_rc_priv->ht_cap = (WLAN_RC_HT_FLAG | WLAN_RC_DS_FLAG); if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) @@ -1691,8 +1641,8 @@ static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp return NULL; } - rate_priv->asc = sc->sc_rc; rate_priv->rssi_down_time = jiffies_to_msecs(jiffies); + rate_priv->tx_triglevel_max = sc->sc_ah->ah_caps.tx_triglevel_max; return rate_priv; } @@ -1717,6 +1667,28 @@ static struct rate_control_ops ath_rate_ops = { .free_sta = ath_rate_free_sta, }; +void ath_rate_attach(struct ath_softc *sc) +{ + sc->hw_rate_table[ATH9K_MODE_11B] = + &ar5416_11b_ratetable; + sc->hw_rate_table[ATH9K_MODE_11A] = + &ar5416_11a_ratetable; + sc->hw_rate_table[ATH9K_MODE_11G] = + &ar5416_11g_ratetable; + sc->hw_rate_table[ATH9K_MODE_11NA_HT20] = + &ar5416_11na_ratetable; + sc->hw_rate_table[ATH9K_MODE_11NG_HT20] = + &ar5416_11ng_ratetable; + sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS] = + &ar5416_11na_ratetable; + sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS] = + &ar5416_11na_ratetable; + sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS] = + &ar5416_11ng_ratetable; + sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS] = + &ar5416_11ng_ratetable; +} + int ath_rate_control_register(void) { return ieee80211_rate_control_register(&ath_rate_ops); diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index 07319c6c2e02..30248de5b2b6 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -199,15 +199,6 @@ struct ath_rateset { u8 rs_rates[ATH_RATE_MAX]; }; -/* per-device state */ -struct ath_rate_softc { - /* phy tables that contain rate control data */ - const void *hw_rate_table[ATH9K_MODE_MAX]; - - /* -1 or index of fixed rate */ - int fixedrix; -}; - /** * struct ath_rate_node - Rate Control priv data * @state: RC state @@ -261,6 +252,7 @@ struct ath_rate_node { u32 per_down_time; u32 probe_interval; u32 prev_data_rix; + u32 tx_triglevel_max; struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; struct ath_rateset neg_rates; struct ath_rateset neg_ht_rates; @@ -276,8 +268,7 @@ struct ath_tx_info_priv { u8 min_rate; }; -struct ath_rate_softc *ath_rate_attach(struct ath_softc *sch); -void ath_rate_detach(struct ath_rate_softc *asc); +void ath_rate_attach(struct ath_softc *sc); u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate); int ath_rate_control_register(void); void ath_rate_control_unregister(void); -- cgit v1.2.2 From a8efee4f4740c61fccaf73608df282c4ee24ae86 Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:07:30 +0530 Subject: ath9k: Use rate_driver_data Remove the hack using vif, and use rate_driver_data within skb->cb to hold driver specific rate information. Setup the rate series in the skb's tx control area and remove all references to ath9k specific rate series ( using struct ath_rc_series ). Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.h | 1 - drivers/net/wireless/ath9k/main.c | 9 +-- drivers/net/wireless/ath9k/rc.c | 145 ++++++++++++++-------------------- drivers/net/wireless/ath9k/rc.h | 17 ---- drivers/net/wireless/ath9k/xmit.c | 162 ++++++++++---------------------------- 5 files changed, 108 insertions(+), 226 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index cf2d9410b3dd..255f860b2719 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -203,7 +203,6 @@ struct ath_buf_state { int bfs_seqno; /* sequence number */ int bfs_tidno; /* tid of this frame */ int bfs_retries; /* current retries */ - struct ath_rc_series bfs_rcs[4]; /* rate series */ u32 bf_type; /* BUF_* (enum buffer_type) */ /* key type use to encrypt this frame */ u32 bfs_keyix; diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index ca7809836c33..11d7bee2fda0 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -350,13 +350,12 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, DPRINTF(sc, ATH_DBG_XMIT, "%s: TX complete: skb: %p\n", __func__, skb); - ieee80211_tx_info_clear_status(tx_info); if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { - /* free driver's private data area of tx_info, XXX: HACK! */ - if (tx_info->control.vif != NULL) - kfree(tx_info->control.vif); - tx_info->control.vif = NULL; + if (tx_info->rate_driver_data[0] != NULL) { + kfree(tx_info->rate_driver_data[0]); + tx_info->rate_driver_data[0] = NULL; + } } if (tx_status->flags & ATH_TX_BAR) { diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 59c146cdd0db..156b245ab9e4 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -805,22 +805,22 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, } static void ath_rc_rate_set_series(struct ath_rate_table *rate_table , - struct ath_rc_series *series, + struct ieee80211_tx_rate *rate, u8 tries, u8 rix, int rtsctsenable) { - series->tries = tries; - series->flags = (rtsctsenable ? ATH_RC_RTSCTS_FLAG : 0) | - (WLAN_RC_PHY_DS(rate_table->info[rix].phy) ? - ATH_RC_DS_FLAG : 0) | - (WLAN_RC_PHY_40(rate_table->info[rix].phy) ? - ATH_RC_CW40_FLAG : 0) | - (WLAN_RC_PHY_SGI(rate_table->info[rix].phy) ? - ATH_RC_SGI_FLAG : 0); - - series->rix = rate_table->info[rix].base_index; - series->max_4ms_framelen = rate_table->info[rix].max_4ms_framelen; + rate->count = tries; + rate->idx = rix; + + if (rtsctsenable) + rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS; + if (WLAN_RC_PHY_40(rate_table->info[rix].phy)) + rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + if (WLAN_RC_PHY_SGI(rate_table->info[rix].phy)) + rate->flags |= IEEE80211_TX_RC_SHORT_GI; + if (WLAN_RC_PHY_HT(rate_table->info[rix].phy)) + rate->flags |= IEEE80211_TX_RC_MCS; } static u8 ath_rc_rate_getidx(struct ath_softc *sc, @@ -855,11 +855,12 @@ static u8 ath_rc_rate_getidx(struct ath_softc *sc, static void ath_rc_ratefind(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv, int num_tries, int num_rates, unsigned int rcflag, - struct ath_rc_series series[], int *is_probe, + struct ieee80211_tx_info *tx_info, int *is_probe, int is_retry) { u8 try_per_rate = 0, i = 0, rix, nrix; struct ath_rate_table *rate_table; + struct ieee80211_tx_rate *rates = tx_info->control.rates; rate_table = sc->hw_rate_table[sc->sc_curmode]; rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, @@ -871,7 +872,7 @@ static void ath_rc_ratefind(struct ath_softc *sc, /* set one try for probe rates. For the * probes don't enable rts */ ath_rc_rate_set_series(rate_table, - &series[i++], 1, nrix, FALSE); + &rates[i++], 1, nrix, FALSE); try_per_rate = (num_tries/num_rates); /* Get the next tried/allowed rate. No RTS for the next series @@ -880,12 +881,12 @@ static void ath_rc_ratefind(struct ath_softc *sc, nrix = ath_rc_rate_getidx(sc, ath_rc_priv, rate_table, nrix, 1, FALSE); ath_rc_rate_set_series(rate_table, - &series[i++], try_per_rate, nrix, 0); + &rates[i++], try_per_rate, nrix, 0); } else { try_per_rate = (num_tries/num_rates); /* Set the choosen rate. No RTS for first series entry. */ ath_rc_rate_set_series(rate_table, - &series[i++], try_per_rate, nrix, FALSE); + &rates[i++], try_per_rate, nrix, FALSE); } /* Fill in the other rates for multirate retry */ @@ -902,7 +903,7 @@ static void ath_rc_ratefind(struct ath_softc *sc, rate_table, nrix, 1, min_rate); /* All other rates in the series have RTS enabled */ ath_rc_rate_set_series(rate_table, - &series[i], try_num, nrix, TRUE); + &rates[i], try_num, nrix, TRUE); } /* @@ -928,9 +929,8 @@ static void ath_rc_ratefind(struct ath_softc *sc, if (i == 4 && ((dot11rate == 2 && phy == WLAN_RC_PHY_HT_40_SS) || (dot11rate == 3 && phy == WLAN_RC_PHY_HT_20_SS))) { - series[3].rix = series[2].rix; - series[3].flags = series[2].flags; - series[3].max_4ms_framelen = series[2].max_4ms_framelen; + rates[3].idx = rates[2].idx; + rates[3].flags = rates[2].flags; } } } @@ -943,7 +943,7 @@ static void ath_rate_findrate(struct ath_softc *sc, int num_tries, int num_rates, unsigned int rcflag, - struct ath_rc_series series[], + struct ieee80211_tx_info *tx_info, int *is_probe, int is_retry) { @@ -951,7 +951,7 @@ static void ath_rate_findrate(struct ath_softc *sc, return; ath_rc_ratefind(sc, ath_rc_priv, num_tries, num_rates, - rcflag, series, is_probe, is_retry); + rcflag, tx_info, is_probe, is_retry); } static void ath_rc_update_ht(struct ath_softc *sc, @@ -1283,17 +1283,17 @@ static void ath_rc_update_ht(struct ath_softc *sc, */ static void ath_rc_update(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv, - struct ath_tx_info_priv *info_priv, int final_ts_idx, + struct ieee80211_tx_info *tx_info, int final_ts_idx, int xretries, int long_retry) { + struct ath_tx_info_priv *info_priv = + (struct ath_tx_info_priv *)tx_info->rate_driver_data[0]; struct ath_rate_table *rate_table; - struct ath_rc_series rcs[4]; + struct ieee80211_tx_rate *rates = tx_info->status.rates; u8 flags; u32 series = 0, rix; - memcpy(rcs, info_priv->rcs, 4 * sizeof(rcs[0])); rate_table = sc->hw_rate_table[sc->sc_curmode]; - ASSERT(rcs[0].tries != 0); /* * If the first rate is not the final index, there @@ -1302,31 +1302,31 @@ static void ath_rc_update(struct ath_softc *sc, if (final_ts_idx != 0) { /* Process intermediate rates that failed.*/ for (series = 0; series < final_ts_idx ; series++) { - if (rcs[series].tries != 0) { - flags = rcs[series].flags; + if (rates[series].count != 0) { + flags = rates[series].flags; /* If HT40 and we have switched mode from * 40 to 20 => don't update */ - if ((flags & ATH_RC_CW40_FLAG) && + if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && (ath_rc_priv->rc_phy_mode != - (flags & ATH_RC_CW40_FLAG))) + (flags & IEEE80211_TX_RC_40_MHZ_WIDTH))) return; - if ((flags & ATH_RC_CW40_FLAG) && - (flags & ATH_RC_SGI_FLAG)) + if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && + (flags & IEEE80211_TX_RC_SHORT_GI)) rix = rate_table->info[ - rcs[series].rix].ht_index; - else if (flags & ATH_RC_SGI_FLAG) + rates[series].idx].ht_index; + else if (flags & IEEE80211_TX_RC_SHORT_GI) rix = rate_table->info[ - rcs[series].rix].sgi_index; - else if (flags & ATH_RC_CW40_FLAG) + rates[series].idx].sgi_index; + else if (flags & IEEE80211_TX_RC_40_MHZ_WIDTH) rix = rate_table->info[ - rcs[series].rix].cw40index; + rates[series].idx].cw40index; else rix = rate_table->info[ - rcs[series].rix].base_index; + rates[series].idx].base_index; ath_rc_update_ht(sc, ath_rc_priv, info_priv, rix, xretries ? 1 : 2, - rcs[series].tries); + rates[series].count); } } } else { @@ -1336,24 +1336,24 @@ static void ath_rc_update(struct ath_softc *sc, * Treating it as an excessive retry penalizes the rate * inordinately. */ - if (rcs[0].tries == 1 && xretries == 1) + if (rates[0].count == 1 && xretries == 1) xretries = 2; } - flags = rcs[series].flags; + flags = rates[series].flags; /* If HT40 and we have switched mode from 40 to 20 => don't update */ - if ((flags & ATH_RC_CW40_FLAG) && - (ath_rc_priv->rc_phy_mode != (flags & ATH_RC_CW40_FLAG))) + if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && + (ath_rc_priv->rc_phy_mode != (flags & IEEE80211_TX_RC_40_MHZ_WIDTH))) return; - if ((flags & ATH_RC_CW40_FLAG) && (flags & ATH_RC_SGI_FLAG)) - rix = rate_table->info[rcs[series].rix].ht_index; - else if (flags & ATH_RC_SGI_FLAG) - rix = rate_table->info[rcs[series].rix].sgi_index; - else if (flags & ATH_RC_CW40_FLAG) - rix = rate_table->info[rcs[series].rix].cw40index; + if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && (flags & IEEE80211_TX_RC_SHORT_GI)) + rix = rate_table->info[rates[series].idx].ht_index; + else if (flags & IEEE80211_TX_RC_SHORT_GI) + rix = rate_table->info[rates[series].idx].sgi_index; + else if (flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + rix = rate_table->info[rates[series].idx].cw40index; else - rix = rate_table->info[rcs[series].rix].base_index; + rix = rate_table->info[rates[series].idx].base_index; ath_rc_update_ht(sc, ath_rc_priv, info_priv, rix, xretries, long_retry); @@ -1365,8 +1365,10 @@ static void ath_rc_update(struct ath_softc *sc, static void ath_rate_tx_complete(struct ath_softc *sc, struct ath_node *an, struct ath_rate_node *rc_priv, - struct ath_tx_info_priv *info_priv) + struct ieee80211_tx_info *tx_info) { + struct ath_tx_info_priv *info_priv = + (struct ath_tx_info_priv *)tx_info->rate_driver_data[0]; int final_ts_idx = info_priv->tx.ts_rateindex; int tx_status = 0, is_underrun = 0; @@ -1395,7 +1397,7 @@ static void ath_rate_tx_complete(struct ath_softc *sc, (info_priv->tx.ts_status & ATH9K_TXERR_FIFO)) tx_status = 1; - ath_rc_update(sc, rc_priv, info_priv, final_ts_idx, tx_status, + ath_rc_update(sc, rc_priv, tx_info, final_ts_idx, tx_status, (is_underrun) ? ATH_11N_TXMAXTRY : info_priv->tx.ts_longretry); } @@ -1507,8 +1509,7 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - /* XXX: UGLY HACK!! */ - tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; + tx_info_priv = (struct ath_tx_info_priv *)tx_info->rate_driver_data[0]; an = (struct ath_node *)sta->drv_priv; @@ -1516,10 +1517,9 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, return; if (an && priv_sta && ieee80211_is_data(fc)) - ath_rate_tx_complete(sc, an, priv_sta, tx_info_priv); + ath_rate_tx_complete(sc, an, priv_sta, tx_info); kfree(tx_info_priv); - tx_info->control.vif = NULL; } static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, @@ -1530,28 +1530,18 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ath_softc *sc = priv; struct ieee80211_hw *hw = sc->hw; - struct ath_tx_info_priv *tx_info_priv; struct ath_rate_node *ath_rc_priv = priv_sta; struct ath_node *an; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); int is_probe = FALSE; - s8 lowest_idx; __le16 fc = hdr->frame_control; u8 *qc, tid; - DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); - - /* allocate driver private area of tx_info, XXX: UGLY HACK! */ - tx_info->control.vif = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC); - tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; - ASSERT(tx_info_priv != NULL); - - lowest_idx = rate_lowest_index(sband, sta); - tx_info_priv->min_rate = (sband->bitrates[lowest_idx].bitrate * 2) / 10; /* lowest rate for management and multicast/broadcast frames */ - if (!ieee80211_is_data(fc) || - is_multicast_ether_addr(hdr->addr1) || !sta) { - tx_info->control.rates[0].idx = lowest_idx; + if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) { + tx_info->control.rates[0].idx = rate_lowest_index(sband, sta); + tx_info->control.rates[0].count = + is_multicast_ether_addr(hdr->addr1) ? 1 : ATH_MGT_TXMAXTRY; return; } @@ -1559,24 +1549,11 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, ath_rate_findrate(sc, ath_rc_priv, ATH_11N_TXMAXTRY, 4, ATH_RC_PROBE_ALLOWED, - tx_info_priv->rcs, + tx_info, &is_probe, false); -#if 0 - if (is_probe) - sel->probe_idx = ath_rc_priv->tx_ratectrl.probe_rate; -#endif - - /* Ratecontrol sometimes returns invalid rate index */ - if (tx_info_priv->rcs[0].rix != 0xff) - ath_rc_priv->prev_data_rix = tx_info_priv->rcs[0].rix; - else - tx_info_priv->rcs[0].rix = ath_rc_priv->prev_data_rix; - - tx_info->control.rates[0].idx = tx_info_priv->rcs[0].rix; /* Check if aggregation has to be enabled for this tid */ - if (hw->conf.ht.enabled) { if (ieee80211_is_data_qos(fc)) { qc = ieee80211_get_qos_ctl(hdr); diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index 30248de5b2b6..3324bed3f0ac 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -169,20 +169,6 @@ struct ath_rate_table { #define ATH_RC_PROBE_ALLOWED 0x00000001 #define ATH_RC_MINRATE_LASTRATE 0x00000002 -struct ath_rc_series { - u8 rix; - u8 tries; - u8 flags; - u32 max_4ms_framelen; -}; - -/* rcs_flags definition */ -#define ATH_RC_DS_FLAG 0x01 -#define ATH_RC_CW40_FLAG 0x02 /* CW 40 */ -#define ATH_RC_SGI_FLAG 0x04 /* Short Guard Interval */ -#define ATH_RC_HT_FLAG 0x08 /* HT */ -#define ATH_RC_RTSCTS_FLAG 0x10 /* RTS-CTS */ - /* * State structures for new rate adaptation code */ @@ -259,13 +245,10 @@ struct ath_rate_node { struct ath_rate_softc *asc; }; -/* Driver data of ieee80211_tx_info */ struct ath_tx_info_priv { - struct ath_rc_series rcs[4]; struct ath_tx_status tx; int n_frames; int n_bad_frames; - u8 min_rate; }; void ath_rate_attach(struct ath_softc *sc); diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 44735b6d9f04..baf5cb9d967e 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -102,23 +102,6 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq, ath9k_hw_txstart(ah, txq->axq_qnum); } -/* Get transmit rate index using rate in Kbps */ - -static int ath_tx_findindex(const struct ath9k_rate_table *rt, int rate) -{ - int i; - int ndx = 0; - - for (i = 0; i < rt->rateCount; i++) { - if (rt->info[i].rateKbps == rate) { - ndx = i; - break; - } - } - - return ndx; -} - /* Check if it's okay to send out aggregates */ static int ath_aggr_query(struct ath_softc *sc, struct ath_node *an, u8 tidno) @@ -158,26 +141,23 @@ static enum ath9k_pkt_type get_hw_packet_type(struct sk_buff *skb) return htype; } -static bool check_min_rate(struct sk_buff *skb) +static bool is_pae(struct sk_buff *skb) { struct ieee80211_hdr *hdr; - bool use_minrate = false; __le16 fc; hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) { - use_minrate = true; - } else if (ieee80211_is_data(fc)) { + if (ieee80211_is_data(fc)) { if (ieee80211_is_nullfunc(fc) || /* Port Access Entity (IEEE 802.1X) */ (skb->protocol == cpu_to_be16(ETH_P_PAE))) { - use_minrate = true; + return true; } } - return use_minrate; + return false; } static int get_hw_crypto_keytype(struct sk_buff *skb) @@ -199,50 +179,19 @@ static int get_hw_crypto_keytype(struct sk_buff *skb) static void setup_rate_retries(struct ath_softc *sc, struct sk_buff *skb) { struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ath_tx_info_priv *tx_info_priv; - struct ath_rc_series *rcs; + struct ieee80211_tx_rate *rates = tx_info->control.rates; struct ieee80211_hdr *hdr; - const struct ath9k_rate_table *rt; - bool use_minrate; __le16 fc; - u8 rix; - - rt = sc->sc_currates; - BUG_ON(!rt); hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; /* HACK */ - rcs = tx_info_priv->rcs; - - /* Check if min rates have to be used */ - use_minrate = check_min_rate(skb); - - if (ieee80211_is_data(fc) && !use_minrate) { - if (is_multicast_ether_addr(hdr->addr1)) { - rcs[0].rix = - ath_tx_findindex(rt, tx_info_priv->min_rate); - /* mcast packets are not re-tried */ - rcs[0].tries = 1; - } - } else { - /* for management and control frames, - or for NULL and EAPOL frames */ - if (use_minrate) - rcs[0].rix = ath_rate_findrateix(sc, tx_info_priv->min_rate); - else - rcs[0].rix = 0; - rcs[0].tries = ATH_MGT_TXMAXTRY; - } - - rix = rcs[0].rix; if (ieee80211_has_morefrags(fc) || (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) { - rcs[1].tries = rcs[2].tries = rcs[3].tries = 0; - rcs[1].rix = rcs[2].rix = rcs[3].rix = 0; + rates[1].count = rates[2].count = rates[3].count = 0; + rates[1].idx = rates[2].idx = rates[3].idx = 0; /* reset tries but keep rate index */ - rcs[0].tries = ATH_TXMAXTRY; + rates[0].count = ATH_TXMAXTRY; } } @@ -274,7 +223,7 @@ static void assign_aggr_tid_seqno(struct sk_buff *skb, /* Get seqno */ - if (ieee80211_is_data(fc) && !check_min_rate(skb)) { + if (ieee80211_is_data(fc) && !is_pae(skb)) { /* For HT capable stations, we save tidno for later use. * We also override seqno set by upper layer with the one * in tx aggregation state. @@ -573,9 +522,11 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) struct ath_node *an = NULL; struct sk_buff *skb; struct ieee80211_tx_info *tx_info; + struct ieee80211_tx_rate *rates; skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); + rates = tx_info->rate_driver_data[0]; if (tx_info->control.sta) an = (struct ath_node *)tx_info->control.sta->drv_priv; @@ -584,9 +535,9 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * get the cix for the lowest valid rix. */ rt = sc->sc_currates; - for (i = 4; i--;) { - if (bf->bf_rcs[i].tries) { - rix = bf->bf_rcs[i].rix; + for (i = 3; i >= 0; i--) { + if (rates[i].count) { + rix = rates[i].idx; break; } } @@ -662,27 +613,27 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4); for (i = 0; i < 4; i++) { - if (!bf->bf_rcs[i].tries) + if (!rates[i].count) continue; - rix = bf->bf_rcs[i].rix; + rix = rates[i].idx; series[i].Rate = rt->info[rix].rateCode | (bf_isshpreamble(bf) ? rt->info[rix].shortPreamble : 0); - series[i].Tries = bf->bf_rcs[i].tries; + series[i].Tries = rates[i].count; series[i].RateFlags = ( - (bf->bf_rcs[i].flags & ATH_RC_RTSCTS_FLAG) ? + (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) ? ATH9K_RATESERIES_RTS_CTS : 0) | - ((bf->bf_rcs[i].flags & ATH_RC_CW40_FLAG) ? + ((rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) ? ATH9K_RATESERIES_2040 : 0) | - ((bf->bf_rcs[i].flags & ATH_RC_SGI_FLAG) ? + ((rates[i].flags & IEEE80211_TX_RC_SHORT_GI) ? ATH9K_RATESERIES_HALFGI : 0); series[i].PktDuration = ath_pkt_duration(sc, rix, bf, - (bf->bf_rcs[i].flags & ATH_RC_CW40_FLAG) != 0, - (bf->bf_rcs[i].flags & ATH_RC_SGI_FLAG), + (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) != 0, + (rates[i].flags & IEEE80211_TX_RC_SHORT_GI), bf_isshpreamble(bf)); if (bf_isht(bf) && an) @@ -718,22 +669,12 @@ static int ath_tx_send_normal(struct ath_softc *sc, struct list_head *bf_head) { struct ath_buf *bf; - struct sk_buff *skb; - struct ieee80211_tx_info *tx_info; - struct ath_tx_info_priv *tx_info_priv; BUG_ON(list_empty(bf_head)); bf = list_first_entry(bf_head, struct ath_buf, list); bf->bf_state.bf_type &= ~BUF_AMPDU; /* regular HT frame */ - skb = (struct sk_buff *)bf->bf_mpdu; - tx_info = IEEE80211_SKB_CB(skb); - - /* XXX: HACK! */ - tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; - memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); - /* update starting sequence number for subsequent ADDBA request */ INCR(tid->seq_start, IEEE80211_SEQ_MAX); @@ -1124,8 +1065,8 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) skb = bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - /* XXX: HACK! */ - tx_info_priv = (struct ath_tx_info_priv *) tx_info->control.vif; + tx_info_priv = + (struct ath_tx_info_priv *)tx_info->rate_driver_data[0]; if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 && @@ -1268,9 +1209,6 @@ static int ath_tx_send_ampdu(struct ath_softc *sc, struct ath_tx_control *txctl) { struct ath_buf *bf; - struct sk_buff *skb; - struct ieee80211_tx_info *tx_info; - struct ath_tx_info_priv *tx_info_priv; BUG_ON(list_empty(bf_head)); @@ -1296,12 +1234,6 @@ static int ath_tx_send_ampdu(struct ath_softc *sc, return 0; } - skb = (struct sk_buff *)bf->bf_mpdu; - tx_info = IEEE80211_SKB_CB(skb); - /* XXX: HACK! */ - tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; - memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); - /* Add sub-frame to BAW */ ath_tx_addto_baw(sc, tid, bf); @@ -1323,9 +1255,11 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf, struct ath_atx_tid *tid) { + struct ath_rate_table *rate_table = sc->hw_rate_table[sc->sc_curmode]; const struct ath9k_rate_table *rt = sc->sc_currates; struct sk_buff *skb; struct ieee80211_tx_info *tx_info; + struct ieee80211_tx_rate *rates; struct ath_tx_info_priv *tx_info_priv; u32 max_4ms_framelen, frame_length; u16 aggr_limit, legacy = 0, maxampdu; @@ -1333,10 +1267,9 @@ static u32 ath_lookup_rate(struct ath_softc *sc, skb = (struct sk_buff *)bf->bf_mpdu; tx_info = IEEE80211_SKB_CB(skb); - tx_info_priv = (struct ath_tx_info_priv *) - tx_info->control.vif; /* XXX: HACK! */ - memcpy(bf->bf_rcs, - tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0])); + rates = tx_info->control.rates; + tx_info_priv = + (struct ath_tx_info_priv *)tx_info->rate_driver_data[0]; /* * Find the lowest frame length among the rate series that will have a @@ -1346,14 +1279,14 @@ static u32 ath_lookup_rate(struct ath_softc *sc, max_4ms_framelen = ATH_AMPDU_LIMIT_MAX; for (i = 0; i < 4; i++) { - if (bf->bf_rcs[i].tries) { - frame_length = bf->bf_rcs[i].max_4ms_framelen; - - if (rt->info[bf->bf_rcs[i].rix].phy != PHY_HT) { + if (rates[i].count) { + if (rt->info[rates[i].idx].phy != PHY_HT) { legacy = 1; break; } + frame_length = + rate_table->info[rates[i].idx].max_4ms_framelen; max_4ms_framelen = min(max_4ms_framelen, frame_length); } } @@ -1393,6 +1326,8 @@ static int ath_compute_num_delims(struct ath_softc *sc, u16 frmlen) { const struct ath9k_rate_table *rt = sc->sc_currates; + struct sk_buff *skb = bf->bf_mpdu; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); u32 nsymbits, nsymbols, mpdudensity; u16 minlen; u8 rc, flags, rix; @@ -1425,11 +1360,11 @@ static int ath_compute_num_delims(struct ath_softc *sc, if (mpdudensity == 0) return ndelim; - rix = bf->bf_rcs[0].rix; - flags = bf->bf_rcs[0].flags; + rix = tx_info->control.rates[0].idx; + flags = tx_info->control.rates[0].flags; rc = rt->info[rix].rateCode; - width = (flags & ATH_RC_CW40_FLAG) ? 1 : 0; - half_gi = (flags & ATH_RC_SGI_FLAG) ? 1 : 0; + width = (flags & IEEE80211_TX_RC_40_MHZ_WIDTH) ? 1 : 0; + half_gi = (flags & IEEE80211_TX_RC_SHORT_GI) ? 1 : 0; if (half_gi) nsymbols = NUM_SYMBOLS_PER_USEC_HALFGI(mpdudensity); @@ -1471,7 +1406,7 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc, u16 aggr_limit = 0, al = 0, bpad = 0, al_delta, h_baw = tid->baw_size / 2; enum ATH_AGGR_STATUS status = ATH_AGGR_DONE; - int prev_al = 0, is_ds_rate = 0; + int prev_al = 0; INIT_LIST_HEAD(&bf_head); BUG_ON(list_empty(&tid->buf_q)); @@ -1492,11 +1427,6 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc, if (!rl) { aggr_limit = ath_lookup_rate(sc, bf, tid); rl = 1; - /* - * Is rate dual stream - */ - is_ds_rate = - (bf->bf_rcs[0].flags & ATH_RC_DS_FLAG) ? 1 : 0; } /* @@ -1739,14 +1669,13 @@ static void ath_tx_setup_buffer(struct ath_softc *sc, struct ath_buf *bf, struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ath_tx_info_priv *tx_info_priv; - struct ath_rc_series *rcs; int hdrlen; __le16 fc; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif; + tx_info_priv = kzalloc(sizeof(*tx_info_priv), GFP_KERNEL); + tx_info->rate_driver_data[0] = tx_info_priv; hdrlen = ieee80211_get_hdrlen_from_skb(skb); fc = hdr->frame_control; - rcs = tx_info_priv->rcs; ATH_TXBUF_RESET(bf); @@ -1766,7 +1695,7 @@ static void ath_tx_setup_buffer(struct ath_softc *sc, struct ath_buf *bf, (sc->sc_flags & SC_OP_PREAMBLE_SHORT) ? (bf->bf_state.bf_type |= BUF_SHORT_PREAMBLE) : (bf->bf_state.bf_type &= ~BUF_SHORT_PREAMBLE); - (sc->hw->conf.ht.enabled && + (sc->hw->conf.ht.enabled && !is_pae(skb) && (tx_info->flags & IEEE80211_TX_CTL_AMPDU)) ? (bf->bf_state.bf_type |= BUF_HT) : (bf->bf_state.bf_type &= ~BUF_HT); @@ -1788,11 +1717,6 @@ static void ath_tx_setup_buffer(struct ath_softc *sc, struct ath_buf *bf, setup_rate_retries(sc, skb); - bf->bf_rcs[0] = rcs[0]; - bf->bf_rcs[1] = rcs[1]; - bf->bf_rcs[2] = rcs[2]; - bf->bf_rcs[3] = rcs[3]; - /* Assign seqno, tidno */ if (bf_isht(bf) && (sc->sc_flags & SC_OP_TXAGGR)) -- cgit v1.2.2 From e63835b0f4d8545942fd41b3ca32bbf71bd73e4b Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:07:53 +0530 Subject: ath9k: Remove ath9k_rate_table Maintaining two sets of rate tables is redundant, remove one and use struct ath_rate_table exclusively. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/ath9k.h | 26 +---- drivers/net/wireless/ath9k/beacon.c | 8 +- drivers/net/wireless/ath9k/core.c | 52 ++-------- drivers/net/wireless/ath9k/core.h | 5 - drivers/net/wireless/ath9k/hw.c | 190 +----------------------------------- drivers/net/wireless/ath9k/main.c | 2 + drivers/net/wireless/ath9k/rc.c | 51 ++++++++-- drivers/net/wireless/ath9k/rc.h | 3 + drivers/net/wireless/ath9k/recv.c | 6 +- drivers/net/wireless/ath9k/xmit.c | 163 +++++++++++-------------------- 10 files changed, 132 insertions(+), 374 deletions(-) diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h index 6be2b947307c..c4012c88d82b 100644 --- a/drivers/net/wireless/ath9k/ath9k.h +++ b/drivers/net/wireless/ath9k/ath9k.h @@ -401,22 +401,6 @@ enum ath9k_int { ATH9K_INT_NOCARD = 0xffffffff }; -struct ath9k_rate_table { - int rateCount; - u8 rateCodeToIndex[256]; - struct { - u8 valid; - u8 phy; - u32 rateKbps; - u8 rateCode; - u8 shortPreamble; - u8 dot11Rate; - u8 controlRate; - u16 lpAckDuration; - u16 spAckDuration; - } info[32]; -}; - #define ATH9K_RATESERIES_RTS_CTS 0x0001 #define ATH9K_RATESERIES_2040 0x0002 #define ATH9K_RATESERIES_HALFGI 0x0004 @@ -828,6 +812,8 @@ struct chan_centers { u16 ext_center; }; +struct ath_rate_table; + /* Helpers */ enum wireless_mode ath9k_hw_chan2wmode(struct ath_hal *ah, @@ -838,7 +824,7 @@ bool ath9k_get_channel_edges(struct ath_hal *ah, u16 flags, u16 *low, u16 *high); u16 ath9k_hw_computetxtime(struct ath_hal *ah, - const struct ath9k_rate_table *rates, + struct ath_rate_table *rates, u32 frameLen, u16 rateix, bool shortPreamble); u32 ath9k_hw_mhz2ieee(struct ath_hal *ah, u32 freq, u32 flags); @@ -883,12 +869,6 @@ void ath9k_hw_configpcipowersave(struct ath_hal *ah, int restore); void ath9k_hw_beaconinit(struct ath_hal *ah, u32 next_beacon, u32 beacon_period); void ath9k_hw_set_sta_beacon_timers(struct ath_hal *ah, const struct ath9k_beacon_state *bs); - -/* Rate table */ - -const struct ath9k_rate_table *ath9k_hw_getratetable(struct ath_hal *ah, - u32 mode); - /* HW Capabilities */ bool ath9k_hw_fill_cap_info(struct ath_hal *ah); diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index d186cd41c235..dcf23834194c 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -68,7 +68,7 @@ static void ath_beacon_setup(struct ath_softc *sc, struct ath_hal *ah = sc->sc_ah; struct ath_desc *ds; struct ath9k_11n_rate_series series[4]; - const struct ath9k_rate_table *rt; + struct ath_rate_table *rt; int flags, antenna; u8 rix, rate; int ctsrate = 0; @@ -106,10 +106,10 @@ static void ath_beacon_setup(struct ath_softc *sc, * XXX everything at min xmit rate */ rix = 0; - rt = sc->sc_currates; - rate = rt->info[rix].rateCode; + rt = sc->hw_rate_table[sc->sc_curmode]; + rate = rt->info[rix].ratecode; if (sc->sc_flags & SC_OP_PREAMBLE_SHORT) - rate |= rt->info[rix].shortPreamble; + rate |= rt->info[rix].short_preamble; ath9k_hw_set11n_txdesc(ah, ds, skb->len + FCS_LEN, /* frame length */ diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c index 6c872e704b93..fb6a013f3f31 100644 --- a/drivers/net/wireless/ath9k/core.c +++ b/drivers/net/wireless/ath9k/core.c @@ -80,38 +80,9 @@ static u8 parse_mpdudensity(u8 mpdudensity) /* * Set current operating mode - * - * This function initializes and fills the rate table in the ATH object based - * on the operating mode. */ static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) { - const struct ath9k_rate_table *rt; - int i; - - rt = ath9k_hw_getratetable(sc->sc_ah, mode); - BUG_ON(!rt); - - memset(sc->sc_hwmap, 0, sizeof(sc->sc_hwmap)); - for (i = 0; i < 256; i++) { - u8 ix = rt->rateCodeToIndex[i]; - - if (ix == 0xff) - continue; - - sc->sc_hwmap[i].ieeerate = - rt->info[ix].dot11Rate & IEEE80211_RATE_VAL; - sc->sc_hwmap[i].rateKbps = rt->info[ix].rateKbps; - - if (rt->info[ix].shortPreamble || - rt->info[ix].phy == PHY_OFDM) { - /* XXX: Handle this */ - } - - /* NB: this uses the last entry if the rate isn't found */ - /* XXX beware of overlow */ - } - sc->sc_currates = rt; sc->sc_curmode = mode; /* * All protection frames are transmited at 2Mb/s for @@ -126,37 +97,36 @@ static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) */ static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band) { - struct ath_hal *ah = sc->sc_ah; - const struct ath9k_rate_table *rt = NULL; + struct ath_rate_table *rate_table = NULL; struct ieee80211_supported_band *sband; struct ieee80211_rate *rate; int i, maxrates; switch (band) { case IEEE80211_BAND_2GHZ: - rt = ath9k_hw_getratetable(ah, ATH9K_MODE_11G); + rate_table = sc->hw_rate_table[ATH9K_MODE_11G]; break; case IEEE80211_BAND_5GHZ: - rt = ath9k_hw_getratetable(ah, ATH9K_MODE_11A); + rate_table = sc->hw_rate_table[ATH9K_MODE_11A]; break; default: break; } - if (rt == NULL) + if (rate_table == NULL) return; sband = &sc->sbands[band]; rate = sc->rates[band]; - if (rt->rateCount > ATH_RATE_MAX) + if (rate_table->rate_cnt > ATH_RATE_MAX) maxrates = ATH_RATE_MAX; else - maxrates = rt->rateCount; + maxrates = rate_table->rate_cnt; for (i = 0; i < maxrates; i++) { - rate[i].bitrate = rt->info[i].rateKbps / 100; - rate[i].hw_value = rt->info[i].rateCode; + rate[i].bitrate = rate_table->info[i].ratekbps / 100; + rate[i].hw_value = rate_table->info[i].ratecode; sband->n_bitrates++; DPRINTF(sc, ATH_DBG_CONFIG, "%s: Rate: %2dMbps, ratecode: %2d\n", @@ -1000,12 +970,10 @@ int ath_init(u16 devid, struct ath_softc *sc) /* Setup rate tables */ + ath_rate_attach(sc); ath_setup_rates(sc, IEEE80211_BAND_2GHZ); ath_setup_rates(sc, IEEE80211_BAND_5GHZ); - /* NB: setup here so ath_rate_update is happy */ - ath_setcurmode(sc, ATH9K_MODE_11A); - /* * Allocate hardware transmit queues: one queue for * beacon frames and one data queue for each QoS @@ -1071,8 +1039,6 @@ int ath_init(u16 devid, struct ath_softc *sc) sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR; setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc); - ath_rate_attach(sc); - if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, ATH9K_CIPHER_TKIP, NULL)) { /* diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 255f860b2719..0c348209f39c 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -858,12 +858,7 @@ struct ath_softc { /* Rate */ struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX]; struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX]; - const struct ath9k_rate_table *sc_currates; u8 sc_protrix; /* protection rate index */ - struct { - u32 rateKbps; /* transfer rate in kbs */ - u8 ieeerate; /* IEEE rate */ - } sc_hwmap[256]; /* h/w rate ix mappings */ /* Channel, Band */ struct ieee80211_channel channels[IEEE80211_NUM_BANDS][ATH_CHAN_MAX]; diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c index 82c2a4259ce4..a26867c56a82 100644 --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c @@ -142,14 +142,14 @@ bool ath9k_get_channel_edges(struct ath_hal *ah, } u16 ath9k_hw_computetxtime(struct ath_hal *ah, - const struct ath9k_rate_table *rates, + struct ath_rate_table *rates, u32 frameLen, u16 rateix, bool shortPreamble) { u32 bitsPerSymbol, numBits, numSymbols, phyTime, txTime; u32 kbps; - kbps = rates->info[rateix].rateKbps; + kbps = rates->info[rateix].ratekbps; if (kbps == 0) return 0; @@ -157,7 +157,7 @@ u16 ath9k_hw_computetxtime(struct ath_hal *ah, switch (rates->info[rateix].phy) { case PHY_CCK: phyTime = CCK_PREAMBLE_BITS + CCK_PLCP_BITS; - if (shortPreamble && rates->info[rateix].shortPreamble) + if (shortPreamble && rates->info[rateix].short_preamble) phyTime >>= 1; numBits = frameLen << 3; txTime = CCK_SIFS_TIME + phyTime + ((numBits * 1000) / kbps); @@ -3190,190 +3190,6 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hal *ah, } -/***************/ -/* Rate tables */ -/***************/ - -static struct ath9k_rate_table ar5416_11a_table = { - 8, - {0}, - { - {true, PHY_OFDM, 6000, 0x0b, 0x00, (0x80 | 12), 0}, - {true, PHY_OFDM, 9000, 0x0f, 0x00, 18, 0}, - {true, PHY_OFDM, 12000, 0x0a, 0x00, (0x80 | 24), 2}, - {true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 2}, - {true, PHY_OFDM, 24000, 0x09, 0x00, (0x80 | 48), 4}, - {true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 4}, - {true, PHY_OFDM, 48000, 0x08, 0x00, 96, 4}, - {true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 4} - }, -}; - -static struct ath9k_rate_table ar5416_11b_table = { - 4, - {0}, - { - {true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0}, - {true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1}, - {true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 1}, - {true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 1} - }, -}; - -static struct ath9k_rate_table ar5416_11g_table = { - 12, - {0}, - { - {true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0}, - {true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1}, - {true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 2}, - {true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 3}, - - {false, PHY_OFDM, 6000, 0x0b, 0x00, 12, 4}, - {false, PHY_OFDM, 9000, 0x0f, 0x00, 18, 4}, - {true, PHY_OFDM, 12000, 0x0a, 0x00, 24, 6}, - {true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 6}, - {true, PHY_OFDM, 24000, 0x09, 0x00, 48, 8}, - {true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 8}, - {true, PHY_OFDM, 48000, 0x08, 0x00, 96, 8}, - {true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 8} - }, -}; - -static struct ath9k_rate_table ar5416_11ng_table = { - 28, - {0}, - { - {true, PHY_CCK, 1000, 0x1b, 0x00, (0x80 | 2), 0}, - {true, PHY_CCK, 2000, 0x1a, 0x04, (0x80 | 4), 1}, - {true, PHY_CCK, 5500, 0x19, 0x04, (0x80 | 11), 2}, - {true, PHY_CCK, 11000, 0x18, 0x04, (0x80 | 22), 3}, - - {false, PHY_OFDM, 6000, 0x0b, 0x00, 12, 4}, - {false, PHY_OFDM, 9000, 0x0f, 0x00, 18, 4}, - {true, PHY_OFDM, 12000, 0x0a, 0x00, 24, 6}, - {true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 6}, - {true, PHY_OFDM, 24000, 0x09, 0x00, 48, 8}, - {true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 8}, - {true, PHY_OFDM, 48000, 0x08, 0x00, 96, 8}, - {true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 8}, - {true, PHY_HT, 6500, 0x80, 0x00, 0, 4}, - {true, PHY_HT, 13000, 0x81, 0x00, 1, 6}, - {true, PHY_HT, 19500, 0x82, 0x00, 2, 6}, - {true, PHY_HT, 26000, 0x83, 0x00, 3, 8}, - {true, PHY_HT, 39000, 0x84, 0x00, 4, 8}, - {true, PHY_HT, 52000, 0x85, 0x00, 5, 8}, - {true, PHY_HT, 58500, 0x86, 0x00, 6, 8}, - {true, PHY_HT, 65000, 0x87, 0x00, 7, 8}, - {true, PHY_HT, 13000, 0x88, 0x00, 8, 4}, - {true, PHY_HT, 26000, 0x89, 0x00, 9, 6}, - {true, PHY_HT, 39000, 0x8a, 0x00, 10, 6}, - {true, PHY_HT, 52000, 0x8b, 0x00, 11, 8}, - {true, PHY_HT, 78000, 0x8c, 0x00, 12, 8}, - {true, PHY_HT, 104000, 0x8d, 0x00, 13, 8}, - {true, PHY_HT, 117000, 0x8e, 0x00, 14, 8}, - {true, PHY_HT, 130000, 0x8f, 0x00, 15, 8}, - }, -}; - -static struct ath9k_rate_table ar5416_11na_table = { - 24, - {0}, - { - {true, PHY_OFDM, 6000, 0x0b, 0x00, (0x80 | 12), 0}, - {true, PHY_OFDM, 9000, 0x0f, 0x00, 18, 0}, - {true, PHY_OFDM, 12000, 0x0a, 0x00, (0x80 | 24), 2}, - {true, PHY_OFDM, 18000, 0x0e, 0x00, 36, 2}, - {true, PHY_OFDM, 24000, 0x09, 0x00, (0x80 | 48), 4}, - {true, PHY_OFDM, 36000, 0x0d, 0x00, 72, 4}, - {true, PHY_OFDM, 48000, 0x08, 0x00, 96, 4}, - {true, PHY_OFDM, 54000, 0x0c, 0x00, 108, 4}, - {true, PHY_HT, 6500, 0x80, 0x00, 0, 0}, - {true, PHY_HT, 13000, 0x81, 0x00, 1, 2}, - {true, PHY_HT, 19500, 0x82, 0x00, 2, 2}, - {true, PHY_HT, 26000, 0x83, 0x00, 3, 4}, - {true, PHY_HT, 39000, 0x84, 0x00, 4, 4}, - {true, PHY_HT, 52000, 0x85, 0x00, 5, 4}, - {true, PHY_HT, 58500, 0x86, 0x00, 6, 4}, - {true, PHY_HT, 65000, 0x87, 0x00, 7, 4}, - {true, PHY_HT, 13000, 0x88, 0x00, 8, 0}, - {true, PHY_HT, 26000, 0x89, 0x00, 9, 2}, - {true, PHY_HT, 39000, 0x8a, 0x00, 10, 2}, - {true, PHY_HT, 52000, 0x8b, 0x00, 11, 4}, - {true, PHY_HT, 78000, 0x8c, 0x00, 12, 4}, - {true, PHY_HT, 104000, 0x8d, 0x00, 13, 4}, - {true, PHY_HT, 117000, 0x8e, 0x00, 14, 4}, - {true, PHY_HT, 130000, 0x8f, 0x00, 15, 4}, - }, -}; - -static void ath9k_hw_setup_rate_table(struct ath_hal *ah, - struct ath9k_rate_table *rt) -{ - int i; - - if (rt->rateCodeToIndex[0] != 0) - return; - - for (i = 0; i < 256; i++) - rt->rateCodeToIndex[i] = (u8) -1; - - for (i = 0; i < rt->rateCount; i++) { - u8 code = rt->info[i].rateCode; - u8 cix = rt->info[i].controlRate; - - rt->rateCodeToIndex[code] = i; - rt->rateCodeToIndex[code | rt->info[i].shortPreamble] = i; - - rt->info[i].lpAckDuration = - ath9k_hw_computetxtime(ah, rt, - WLAN_CTRL_FRAME_SIZE, - cix, - false); - rt->info[i].spAckDuration = - ath9k_hw_computetxtime(ah, rt, - WLAN_CTRL_FRAME_SIZE, - cix, - true); - } -} - -const struct ath9k_rate_table *ath9k_hw_getratetable(struct ath_hal *ah, - u32 mode) -{ - struct ath9k_rate_table *rt; - - switch (mode) { - case ATH9K_MODE_11A: - rt = &ar5416_11a_table; - break; - case ATH9K_MODE_11B: - rt = &ar5416_11b_table; - break; - case ATH9K_MODE_11G: - rt = &ar5416_11g_table; - break; - case ATH9K_MODE_11NG_HT20: - case ATH9K_MODE_11NG_HT40PLUS: - case ATH9K_MODE_11NG_HT40MINUS: - rt = &ar5416_11ng_table; - break; - case ATH9K_MODE_11NA_HT20: - case ATH9K_MODE_11NA_HT40PLUS: - case ATH9K_MODE_11NA_HT40MINUS: - rt = &ar5416_11na_table; - break; - default: - DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL, "%s: invalid mode 0x%x\n", - __func__, mode); - return NULL; - } - - ath9k_hw_setup_rate_table(ah, rt); - - return rt; -} - /*******************/ /* HW Capabilities */ /*******************/ diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 11d7bee2fda0..e86bcd284148 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -780,6 +780,8 @@ static int ath_attach(u16 devid, struct ath_softc *sc) BIT(NL80211_IFTYPE_ADHOC); hw->queues = 4; + hw->max_rates = 4; + hw->max_rate_tries = ATH_11N_TXMAXTRY; hw->sta_data_size = sizeof(struct ath_node); hw->vif_data_size = sizeof(struct ath_vap); diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 156b245ab9e4..bf637aa7ddab 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -25,6 +25,7 @@ static struct ath_rate_table ar5416_11na_ratetable = { 42, + {0}, { { TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 6 Mb */ 5400, 0x0b, 0x00, 12, @@ -168,6 +169,7 @@ static struct ath_rate_table ar5416_11na_ratetable = { static struct ath_rate_table ar5416_11ng_ratetable = { 46, + {0}, { { TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 1000, /* 1 Mb */ 900, 0x1b, 0x00, 2, @@ -315,6 +317,7 @@ static struct ath_rate_table ar5416_11ng_ratetable = { static struct ath_rate_table ar5416_11a_ratetable = { 8, + {0}, { { TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 6 Mb */ 5400, 0x0b, 0x00, (0x80|12), @@ -348,6 +351,7 @@ static struct ath_rate_table ar5416_11a_ratetable = { static struct ath_rate_table ar5416_11g_ratetable = { 12, + {0}, { { TRUE, TRUE, WLAN_PHY_CCK, 1000, /* 1 Mb */ 900, 0x1b, 0x00, 2, @@ -393,6 +397,7 @@ static struct ath_rate_table ar5416_11g_ratetable = { static struct ath_rate_table ar5416_11b_ratetable = { 4, + {0}, { { TRUE, TRUE, WLAN_PHY_CCK, 1000, /* 1 Mb */ 900, 0x1b, 0x00, (0x80|2), @@ -1302,14 +1307,14 @@ static void ath_rc_update(struct ath_softc *sc, if (final_ts_idx != 0) { /* Process intermediate rates that failed.*/ for (series = 0; series < final_ts_idx ; series++) { - if (rates[series].count != 0) { + if (rates[series].count != 0 && (rates[series].idx >= 0)) { flags = rates[series].flags; /* If HT40 and we have switched mode from * 40 to 20 => don't update */ if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && - (ath_rc_priv->rc_phy_mode != - (flags & IEEE80211_TX_RC_40_MHZ_WIDTH))) + (ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG)) return; + if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && (flags & IEEE80211_TX_RC_SHORT_GI)) rix = rate_table->info[ @@ -1343,8 +1348,9 @@ static void ath_rc_update(struct ath_softc *sc, flags = rates[series].flags; /* If HT40 and we have switched mode from 40 to 20 => don't update */ if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && - (ath_rc_priv->rc_phy_mode != (flags & IEEE80211_TX_RC_40_MHZ_WIDTH))) + (ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG)) { return; + } if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && (flags & IEEE80211_TX_RC_SHORT_GI)) rix = rate_table->info[rates[series].idx].ht_index; @@ -1628,7 +1634,6 @@ static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta, void *priv_sta) { struct ath_rate_node *rate_priv = priv_sta; - kfree(rate_priv); } @@ -1644,6 +1649,35 @@ static struct rate_control_ops ath_rate_ops = { .free_sta = ath_rate_free_sta, }; +static void ath_setup_rate_table(struct ath_softc *sc, + struct ath_rate_table *rate_table) +{ + int i; + + for (i = 0; i < 256; i++) + rate_table->rateCodeToIndex[i] = (u8)-1; + + for (i = 0; i < rate_table->rate_cnt; i++) { + u8 code = rate_table->info[i].ratecode; + u8 cix = rate_table->info[i].ctrl_rate; + u8 sh = rate_table->info[i].short_preamble; + + rate_table->rateCodeToIndex[code] = i; + rate_table->rateCodeToIndex[code | sh] = i; + + rate_table->info[i].lpAckDuration = + ath9k_hw_computetxtime(sc->sc_ah, rate_table, + WLAN_CTRL_FRAME_SIZE, + cix, + false); + rate_table->info[i].spAckDuration = + ath9k_hw_computetxtime(sc->sc_ah, rate_table, + WLAN_CTRL_FRAME_SIZE, + cix, + true); + } +} + void ath_rate_attach(struct ath_softc *sc) { sc->hw_rate_table[ATH9K_MODE_11B] = @@ -1664,6 +1698,12 @@ void ath_rate_attach(struct ath_softc *sc) &ar5416_11ng_ratetable; sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS] = &ar5416_11ng_ratetable; + + ath_setup_rate_table(sc, &ar5416_11b_ratetable); + ath_setup_rate_table(sc, &ar5416_11a_ratetable); + ath_setup_rate_table(sc, &ar5416_11g_ratetable); + ath_setup_rate_table(sc, &ar5416_11na_ratetable); + ath_setup_rate_table(sc, &ar5416_11ng_ratetable); } int ath_rate_control_register(void) @@ -1675,4 +1715,3 @@ void ath_rate_control_unregister(void) { ieee80211_rate_control_unregister(&ath_rate_ops); } - diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index 3324bed3f0ac..c1e370c7c681 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -143,6 +143,7 @@ enum { */ struct ath_rate_table { int rate_cnt; + u8 rateCodeToIndex[256]; struct { int valid; int valid_single_stream; @@ -160,6 +161,8 @@ struct ath_rate_table { u8 sgi_index; u8 ht_index; u32 max_4ms_framelen; + u16 lpAckDuration; + u16 spAckDuration; } info[RATE_TABLE_SIZE]; u32 probe_interval; u32 rssi_reduce_interval; diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 000e189e104a..20f83779278a 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -140,8 +140,9 @@ static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds, struct ieee80211_rx_status *rx_status, bool *decrypt_error, struct ath_softc *sc) { + struct ath_rate_table *rate_table = sc->hw_rate_table[sc->sc_curmode]; struct ieee80211_hdr *hdr; - int ratekbps; + int ratekbps, rix; u8 ratecode; __le16 fc; @@ -196,7 +197,8 @@ static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds, } ratecode = ds->ds_rxstat.rs_rate; - ratekbps = sc->sc_hwmap[ratecode].rateKbps; + rix = rate_table->rateCodeToIndex[ratecode]; + ratekbps = rate_table->info[rix].ratekbps; /* HT rate */ if (ratecode & 0x80) { diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index baf5cb9d967e..b2d0cca6f4a6 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -176,25 +176,6 @@ static int get_hw_crypto_keytype(struct sk_buff *skb) return ATH9K_KEY_TYPE_CLEAR; } -static void setup_rate_retries(struct ath_softc *sc, struct sk_buff *skb) -{ - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_tx_rate *rates = tx_info->control.rates; - struct ieee80211_hdr *hdr; - __le16 fc; - - hdr = (struct ieee80211_hdr *)skb->data; - fc = hdr->frame_control; - - if (ieee80211_has_morefrags(fc) || - (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) { - rates[1].count = rates[2].count = rates[3].count = 0; - rates[1].idx = rates[2].idx = rates[3].idx = 0; - /* reset tries but keep rate index */ - rates[0].count = ATH_TXMAXTRY; - } -} - /* Called only when tx aggregation is enabled and HT is supported */ static void assign_aggr_tid_seqno(struct sk_buff *skb, @@ -468,27 +449,23 @@ static void ath_tx_update_baw(struct ath_softc *sc, struct ath_atx_tid *tid, * width - 0 for 20 MHz, 1 for 40 MHz * half_gi - to use 4us v/s 3.6 us for symbol time */ - static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf, int width, int half_gi, bool shortPreamble) { - const struct ath9k_rate_table *rt = sc->sc_currates; + struct ath_rate_table *rate_table = sc->hw_rate_table[sc->sc_curmode]; u32 nbits, nsymbits, duration, nsymbols; u8 rc; int streams, pktlen; pktlen = bf_isaggr(bf) ? bf->bf_al : bf->bf_frmlen; - rc = rt->info[rix].rateCode; + rc = rate_table->info[rix].ratecode; - /* - * for legacy rates, use old function to compute packet duration - */ + /* for legacy rates, use old function to compute packet duration */ if (!IS_HT_RATE(rc)) - return ath9k_hw_computetxtime(sc->sc_ah, rt, pktlen, rix, - shortPreamble); - /* - * find number of symbols: PLCP + data - */ + return ath9k_hw_computetxtime(sc->sc_ah, rate_table, pktlen, + rix, shortPreamble); + + /* find number of symbols: PLCP + data */ nbits = (pktlen << 3) + OFDM_PLCP_BITS; nsymbits = bits_per_symbol[HT_RC_2_MCS(rc)][width]; nsymbols = (nbits + nsymbits - 1) / nsymbits; @@ -498,9 +475,7 @@ static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf, else duration = SYMBOL_TIME_HALFGI(nsymbols); - /* - * addup duration for legacy/ht training and signal fields - */ + /* addup duration for legacy/ht training and signal fields */ streams = HT_RC_2_STREAMS(rc); duration += L_STF + L_LTF + L_SIG + HT_SIG + HT_STF + HT_LTF(streams); @@ -512,114 +487,104 @@ static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf, static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) { struct ath_hal *ah = sc->sc_ah; - const struct ath9k_rate_table *rt; + struct ath_rate_table *rt; struct ath_desc *ds = bf->bf_desc; struct ath_desc *lastds = bf->bf_lastbf->bf_desc; struct ath9k_11n_rate_series series[4]; - int i, flags, rtsctsena = 0; - u32 ctsduration = 0; - u8 rix = 0, cix, ctsrate = 0; struct ath_node *an = NULL; struct sk_buff *skb; struct ieee80211_tx_info *tx_info; struct ieee80211_tx_rate *rates; + struct ieee80211_hdr *hdr; + int i, flags, rtsctsena = 0; + u32 ctsduration = 0; + u8 rix = 0, cix, ctsrate = 0; + __le16 fc; + + memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4); skb = (struct sk_buff *)bf->bf_mpdu; + hdr = (struct ieee80211_hdr *)skb->data; + fc = hdr->frame_control; tx_info = IEEE80211_SKB_CB(skb); - rates = tx_info->rate_driver_data[0]; + rates = tx_info->control.rates; if (tx_info->control.sta) an = (struct ath_node *)tx_info->control.sta->drv_priv; - /* - * get the cix for the lowest valid rix. - */ - rt = sc->sc_currates; + if (ieee80211_has_morefrags(fc) || + (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) { + rates[1].count = rates[2].count = rates[3].count = 0; + rates[1].idx = rates[2].idx = rates[3].idx = 0; + rates[0].count = ATH_TXMAXTRY; + } + + /* get the cix for the lowest valid rix */ + rt = sc->hw_rate_table[sc->sc_curmode]; for (i = 3; i >= 0; i--) { - if (rates[i].count) { + if (rates[i].count && (rates[i].idx >= 0)) { rix = rates[i].idx; break; } } + flags = (bf->bf_flags & (ATH9K_TXDESC_RTSENA | ATH9K_TXDESC_CTSENA)); - cix = rt->info[rix].controlRate; + cix = rt->info[rix].ctrl_rate; /* - * If 802.11g protection is enabled, determine whether - * to use RTS/CTS or just CTS. Note that this is only - * done for OFDM/HT unicast frames. + * If 802.11g protection is enabled, determine whether to use RTS/CTS or + * just CTS. Note that this is only done for OFDM/HT unicast frames. */ - if (sc->sc_protmode != PROT_M_NONE && - (rt->info[rix].phy == PHY_OFDM || - rt->info[rix].phy == PHY_HT) && - (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { + if (sc->sc_protmode != PROT_M_NONE && !(bf->bf_flags & ATH9K_TXDESC_NOACK) + && (rt->info[rix].phy == WLAN_PHY_OFDM || + WLAN_RC_PHY_HT(rt->info[rix].phy))) { if (sc->sc_protmode == PROT_M_RTSCTS) flags = ATH9K_TXDESC_RTSENA; else if (sc->sc_protmode == PROT_M_CTSONLY) flags = ATH9K_TXDESC_CTSENA; - cix = rt->info[sc->sc_protrix].controlRate; + cix = rt->info[sc->sc_protrix].ctrl_rate; rtsctsena = 1; } - /* For 11n, the default behavior is to enable RTS for - * hw retried frames. We enable the global flag here and - * let rate series flags determine which rates will actually - * use RTS. + /* For 11n, the default behavior is to enable RTS for hw retried frames. + * We enable the global flag here and let rate series flags determine + * which rates will actually use RTS. */ if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) && bf_isdata(bf)) { - /* - * 802.11g protection not needed, use our default behavior - */ + /* 802.11g protection not needed, use our default behavior */ if (!rtsctsena) flags = ATH9K_TXDESC_RTSENA; } - /* - * Set protection if aggregate protection on - */ + /* Set protection if aggregate protection on */ if (sc->sc_config.ath_aggr_prot && (!bf_isaggr(bf) || (bf_isaggr(bf) && bf->bf_al < 8192))) { flags = ATH9K_TXDESC_RTSENA; - cix = rt->info[sc->sc_protrix].controlRate; + cix = rt->info[sc->sc_protrix].ctrl_rate; rtsctsena = 1; } - /* - * For AR5416 - RTS cannot be followed by a frame larger than 8K. - */ - if (bf_isaggr(bf) && (bf->bf_al > ah->ah_caps.rts_aggr_limit)) { - /* - * Ensure that in the case of SM Dynamic power save - * while we are bursting the second aggregate the - * RTS is cleared. - */ + /* For AR5416 - RTS cannot be followed by a frame larger than 8K */ + if (bf_isaggr(bf) && (bf->bf_al > ah->ah_caps.rts_aggr_limit)) flags &= ~(ATH9K_TXDESC_RTSENA); - } - - /* - * CTS transmit rate is derived from the transmit rate - * by looking in the h/w rate table. We must also factor - * in whether or not a short preamble is to be used. - * NB: cix is set above where RTS/CTS is enabled - */ - BUG_ON(cix == 0xff); - ctsrate = rt->info[cix].rateCode | - (bf_isshpreamble(bf) ? rt->info[cix].shortPreamble : 0); /* - * Setup HAL rate series + * CTS transmit rate is derived from the transmit rate by looking in the + * h/w rate table. We must also factor in whether or not a short + * preamble is to be used. NB: cix is set above where RTS/CTS is enabled */ - memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4); + ctsrate = rt->info[cix].ratecode | + (bf_isshpreamble(bf) ? rt->info[cix].short_preamble : 0); for (i = 0; i < 4; i++) { - if (!rates[i].count) + if (!rates[i].count || (rates[i].idx < 0)) continue; rix = rates[i].idx; - series[i].Rate = rt->info[rix].rateCode | - (bf_isshpreamble(bf) ? rt->info[rix].shortPreamble : 0); + series[i].Rate = rt->info[rix].ratecode | + (bf_isshpreamble(bf) ? rt->info[rix].short_preamble : 0); series[i].Tries = rates[i].count; @@ -645,13 +610,9 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS; } - /* - * set dur_update_en for l-sig computation except for PS-Poll frames - */ - ath9k_hw_set11n_ratescenario(ah, ds, lastds, - !bf_ispspoll(bf), - ctsrate, - ctsduration, + /* set dur_update_en for l-sig computation except for PS-Poll frames */ + ath9k_hw_set11n_ratescenario(ah, ds, lastds, !bf_ispspoll(bf), + ctsrate, ctsduration, series, 4, flags); if (sc->sc_config.ath_aggr_prot && flags) @@ -662,7 +623,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * Function to send a normal HT (non-AMPDU) frame * NB: must be called with txq lock held */ - static int ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq, struct ath_atx_tid *tid, @@ -1256,7 +1216,6 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_atx_tid *tid) { struct ath_rate_table *rate_table = sc->hw_rate_table[sc->sc_curmode]; - const struct ath9k_rate_table *rt = sc->sc_currates; struct sk_buff *skb; struct ieee80211_tx_info *tx_info; struct ieee80211_tx_rate *rates; @@ -1280,7 +1239,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, for (i = 0; i < 4; i++) { if (rates[i].count) { - if (rt->info[rates[i].idx].phy != PHY_HT) { + if (!WLAN_RC_PHY_HT(rate_table->info[rates[i].idx].phy)) { legacy = 1; break; } @@ -1325,7 +1284,7 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_buf *bf, u16 frmlen) { - const struct ath9k_rate_table *rt = sc->sc_currates; + struct ath_rate_table *rt = sc->hw_rate_table[sc->sc_curmode]; struct sk_buff *skb = bf->bf_mpdu; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); u32 nsymbits, nsymbols, mpdudensity; @@ -1362,7 +1321,7 @@ static int ath_compute_num_delims(struct ath_softc *sc, rix = tx_info->control.rates[0].idx; flags = tx_info->control.rates[0].flags; - rc = rt->info[rix].rateCode; + rc = rt->info[rix].ratecode; width = (flags & IEEE80211_TX_RC_40_MHZ_WIDTH) ? 1 : 0; half_gi = (flags & IEEE80211_TX_RC_SHORT_GI) ? 1 : 0; @@ -1713,10 +1672,6 @@ static void ath_tx_setup_buffer(struct ath_softc *sc, struct ath_buf *bf, bf->bf_keyix = ATH9K_TXKEYIX_INVALID; } - /* Rate series */ - - setup_rate_retries(sc, skb); - /* Assign seqno, tidno */ if (bf_isht(bf) && (sc->sc_flags & SC_OP_TXAGGR)) -- cgit v1.2.2 From 46d14a58ffb42702e4c1b8bb88cfa05414617f4c Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:08:13 +0530 Subject: ath9k: General code scrub Replace TRUE/FALSE macros with VALID/INVALID macros. Follow a consistent variable convention. Remove unnecessary comments. Add all RC phy macros into a single enum. Merge functions into reasonably sized entities. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/ath9k.h | 18 +- drivers/net/wireless/ath9k/hw.c | 4 +- drivers/net/wireless/ath9k/main.c | 9 +- drivers/net/wireless/ath9k/rc.c | 546 ++++++++++++++++--------------------- drivers/net/wireless/ath9k/rc.h | 110 ++------ drivers/net/wireless/ath9k/xmit.c | 2 +- 6 files changed, 277 insertions(+), 412 deletions(-) diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h index c4012c88d82b..6b0e3dd7b2ad 100644 --- a/drivers/net/wireless/ath9k/ath9k.h +++ b/drivers/net/wireless/ath9k/ath9k.h @@ -686,13 +686,19 @@ enum ath9k_ani_cmd { ATH9K_ANI_ALL = 0xff }; -enum phytype { - PHY_DS, - PHY_FH, - PHY_OFDM, - PHY_HT, +enum { + WLAN_RC_PHY_OFDM, + WLAN_RC_PHY_CCK, + WLAN_RC_PHY_HT_20_SS, + WLAN_RC_PHY_HT_20_DS, + WLAN_RC_PHY_HT_40_SS, + WLAN_RC_PHY_HT_40_DS, + WLAN_RC_PHY_HT_20_SS_HGI, + WLAN_RC_PHY_HT_20_DS_HGI, + WLAN_RC_PHY_HT_40_SS_HGI, + WLAN_RC_PHY_HT_40_DS_HGI, + WLAN_RC_PHY_MAX }; -#define PHY_CCK PHY_DS enum ath9k_tp_scale { ATH9K_TP_SCALE_MAX = 0, diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c index a26867c56a82..eb1445143bcf 100644 --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c @@ -155,14 +155,14 @@ u16 ath9k_hw_computetxtime(struct ath_hal *ah, return 0; switch (rates->info[rateix].phy) { - case PHY_CCK: + case WLAN_RC_PHY_CCK: phyTime = CCK_PREAMBLE_BITS + CCK_PLCP_BITS; if (shortPreamble && rates->info[rateix].short_preamble) phyTime >>= 1; numBits = frameLen << 3; txTime = CCK_SIFS_TIME + phyTime + ((numBits * 1000) / kbps); break; - case PHY_OFDM: + case WLAN_RC_PHY_OFDM: if (ah->ah_curchan && IS_CHAN_QUARTER_RATE(ah->ah_curchan)) { bitsPerSymbol = (kbps * OFDM_SYMBOL_TIME_QUARTER) / 1000; numBits = OFDM_PLCP_BITS + (frameLen << 3); diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index e86bcd284148..9a798245b1bc 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -346,16 +346,15 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, { struct ieee80211_hw *hw = sc->hw; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); + struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info); DPRINTF(sc, ATH_DBG_XMIT, "%s: TX complete: skb: %p\n", __func__, skb); if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || - tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { - if (tx_info->rate_driver_data[0] != NULL) { - kfree(tx_info->rate_driver_data[0]); - tx_info->rate_driver_data[0] = NULL; - } + tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { + kfree(tx_info_priv); + tx_info->rate_driver_data[0] = NULL; } if (tx_status->flags & ATH_TX_BAR) { diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index bf637aa7ddab..51f51afa6da9 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -15,142 +15,136 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -/* - * Atheros rate control algorithm - */ - #include "core.h" -/* FIXME: remove this include! */ -#include "../net/mac80211/rate.h" static struct ath_rate_table ar5416_11na_ratetable = { 42, {0}, { - { TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 6 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ 5400, 0x0b, 0x00, 12, 0, 2, 1, 0, 0, 0, 0, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 9000, /* 9 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */ 7800, 0x0f, 0x00, 18, 0, 3, 1, 1, 1, 1, 1, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */ 10000, 0x0a, 0x00, 24, 2, 4, 2, 2, 2, 2, 2, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */ 13900, 0x0e, 0x00, 36, 2, 6, 2, 3, 3, 3, 3, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */ 17300, 0x09, 0x00, 48, 4, 10, 3, 4, 4, 4, 4, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */ 23000, 0x0d, 0x00, 72, 4, 14, 3, 5, 5, 5, 5, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */ 27400, 0x08, 0x00, 96, 4, 20, 3, 6, 6, 6, 6, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */ 29300, 0x0c, 0x00, 108, 4, 23, 3, 7, 7, 7, 7, 0 }, - { TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 6500, /* 6.5 Mb */ + { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 6500, /* 6.5 Mb */ 6400, 0x80, 0x00, 0, 0, 2, 3, 8, 24, 8, 24, 3216 }, - { TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 13000, /* 13 Mb */ + { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 13000, /* 13 Mb */ 12700, 0x81, 0x00, 1, 2, 4, 3, 9, 25, 9, 25, 6434 }, - { TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 19500, /* 19.5 Mb */ + { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 19500, /* 19.5 Mb */ 18800, 0x82, 0x00, 2, 2, 6, 3, 10, 26, 10, 26, 9650 }, - { TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 26000, /* 26 Mb */ + { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 26000, /* 26 Mb */ 25000, 0x83, 0x00, 3, 4, 10, 3, 11, 27, 11, 27, 12868 }, - { TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 39000, /* 39 Mb */ + { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 39000, /* 39 Mb */ 36700, 0x84, 0x00, 4, 4, 14, 3, 12, 28, 12, 28, 19304 }, - { FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 52000, /* 52 Mb */ + { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 52000, /* 52 Mb */ 48100, 0x85, 0x00, 5, 4, 20, 3, 13, 29, 13, 29, 25740 }, - { FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 58500, /* 58.5 Mb */ + { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 58500, /* 58.5 Mb */ 53500, 0x86, 0x00, 6, 4, 23, 3, 14, 30, 14, 30, 28956 }, - { FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 65000, /* 65 Mb */ + { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 65000, /* 65 Mb */ 59000, 0x87, 0x00, 7, 4, 25, 3, 15, 31, 15, 32, 32180 }, - { FALSE, FALSE, WLAN_PHY_HT_20_DS, 13000, /* 13 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 13000, /* 13 Mb */ 12700, 0x88, 0x00, 8, 0, 2, 3, 16, 33, 16, 33, 6430 }, - { FALSE, FALSE, WLAN_PHY_HT_20_DS, 26000, /* 26 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 26000, /* 26 Mb */ 24800, 0x89, 0x00, 9, 2, 4, 3, 17, 34, 17, 34, 12860 }, - { FALSE, FALSE, WLAN_PHY_HT_20_DS, 39000, /* 39 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 39000, /* 39 Mb */ 36600, 0x8a, 0x00, 10, 2, 6, 3, 18, 35, 18, 35, 19300 }, - { TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 52000, /* 52 Mb */ + { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 52000, /* 52 Mb */ 48100, 0x8b, 0x00, 11, 4, 10, 3, 19, 36, 19, 36, 25736 }, - { TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 78000, /* 78 Mb */ + { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 78000, /* 78 Mb */ 69500, 0x8c, 0x00, 12, 4, 14, 3, 20, 37, 20, 37, 38600 }, - { TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 104000, /* 104 Mb */ + { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 104000, /* 104 Mb */ 89500, 0x8d, 0x00, 13, 4, 20, 3, 21, 38, 21, 38, 51472 }, - { TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 117000, /* 117 Mb */ + { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 117000, /* 117 Mb */ 98900, 0x8e, 0x00, 14, 4, 23, 3, 22, 39, 22, 39, 57890 }, - { TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 130000, /* 130 Mb */ + { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 130000, /* 130 Mb */ 108300, 0x8f, 0x00, 15, 4, 25, 3, 23, 40, 23, 41, 64320 }, - { TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 13500, /* 13.5 Mb */ + { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 13500, /* 13.5 Mb */ 13200, 0x80, 0x00, 0, 0, 2, 3, 8, 24, 24, 24, 6684 }, - { TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 27500, /* 27.0 Mb */ + { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 27500, /* 27.0 Mb */ 25900, 0x81, 0x00, 1, 2, 4, 3, 9, 25, 25, 25, 13368 }, - { TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 40500, /* 40.5 Mb */ + { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 40500, /* 40.5 Mb */ 38600, 0x82, 0x00, 2, 2, 6, 3, 10, 26, 26, 26, 20052 }, - { TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 54000, /* 54 Mb */ + { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 54000, /* 54 Mb */ 49800, 0x83, 0x00, 3, 4, 10, 3, 11, 27, 27, 27, 26738 }, - { TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 81500, /* 81 Mb */ + { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 81500, /* 81 Mb */ 72200, 0x84, 0x00, 4, 4, 14, 3, 12, 28, 28, 28, 40104 }, - { FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 108000, /* 108 Mb */ + { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 108000, /* 108 Mb */ 92900, 0x85, 0x00, 5, 4, 20, 3, 13, 29, 29, 29, 53476 }, - { FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 121500, /* 121.5 Mb */ + { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 121500, /* 121.5 Mb */ 102700, 0x86, 0x00, 6, 4, 23, 3, 14, 30, 30, 30, 60156 }, - { FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 135000, /* 135 Mb */ + { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 135000, /* 135 Mb */ 112000, 0x87, 0x00, 7, 4, 25, 3, 15, 31, 32, 32, 66840 }, - { FALSE, TRUE_40, WLAN_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */ + { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */ 122000, 0x87, 0x00, 7, 4, 25, 3, 15, 31, 32, 32, 74200 }, - { FALSE, FALSE, WLAN_PHY_HT_40_DS, 27000, /* 27 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 27000, /* 27 Mb */ 25800, 0x88, 0x00, 8, 0, 2, 3, 16, 33, 33, 33, 13360 }, - { FALSE, FALSE, WLAN_PHY_HT_40_DS, 54000, /* 54 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 54000, /* 54 Mb */ 49800, 0x89, 0x00, 9, 2, 4, 3, 17, 34, 34, 34, 26720 }, - { FALSE, FALSE, WLAN_PHY_HT_40_DS, 81000, /* 81 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 81000, /* 81 Mb */ 71900, 0x8a, 0x00, 10, 2, 6, 3, 18, 35, 35, 35, 40080 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 108000, /* 108 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 108000, /* 108 Mb */ 92500, 0x8b, 0x00, 11, 4, 10, 3, 19, 36, 36, 36, 53440 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 162000, /* 162 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 162000, /* 162 Mb */ 130300, 0x8c, 0x00, 12, 4, 14, 3, 20, 37, 37, 37, 80160 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 216000, /* 216 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 216000, /* 216 Mb */ 162800, 0x8d, 0x00, 13, 4, 20, 3, 21, 38, 38, 38, 106880 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 243000, /* 243 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 243000, /* 243 Mb */ 178200, 0x8e, 0x00, 14, 4, 23, 3, 22, 39, 39, 39, 120240 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 270000, /* 270 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 270000, /* 270 Mb */ 192100, 0x8f, 0x00, 15, 4, 25, 3, 23, 40, 41, 41, 133600 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */ 207000, 0x8f, 0x00, 15, 4, 25, 3, 23, 40, 41, 41, 148400 }, }, @@ -159,10 +153,10 @@ static struct ath_rate_table ar5416_11na_ratetable = { WLAN_RC_HT_FLAG, /* Phy rates allowed initially */ }; -/* TRUE_ALL - valid for 20/40/Legacy, - * TRUE - Legacy only, - * TRUE_20 - HT 20 only, - * TRUE_40 - HT 40 only */ +/* VALID_ALL - valid for 20/40/Legacy, + * VALID - Legacy only, + * VALID_20 - HT 20 only, + * VALID_40 - HT 40 only */ /* 4ms frame limit not used for NG mode. The values filled * for HT are the 64K max aggregate limit */ @@ -171,142 +165,142 @@ static struct ath_rate_table ar5416_11ng_ratetable = { 46, {0}, { - { TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 1000, /* 1 Mb */ + { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */ 900, 0x1b, 0x00, 2, 0, 0, 1, 0, 0, 0, 0, 0 }, - { TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 2000, /* 2 Mb */ + { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */ 1900, 0x1a, 0x04, 4, 1, 1, 1, 1, 1, 1, 1, 0 }, - { TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 5500, /* 5.5 Mb */ + { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */ 4900, 0x19, 0x04, 11, 2, 2, 2, 2, 2, 2, 2, 0 }, - { TRUE_ALL, TRUE_ALL, WLAN_PHY_CCK, 11000, /* 11 Mb */ + { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */ 8100, 0x18, 0x04, 22, 3, 3, 2, 3, 3, 3, 3, 0 }, - { FALSE, FALSE, WLAN_PHY_OFDM, 6000, /* 6 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ 5400, 0x0b, 0x00, 12, 4, 2, 1, 4, 4, 4, 4, 0 }, - { FALSE, FALSE, WLAN_PHY_OFDM, 9000, /* 9 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */ 7800, 0x0f, 0x00, 18, 4, 3, 1, 5, 5, 5, 5, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */ 10100, 0x0a, 0x00, 24, 6, 4, 1, 6, 6, 6, 6, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */ 14100, 0x0e, 0x00, 36, 6, 6, 2, 7, 7, 7, 7, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */ 17700, 0x09, 0x00, 48, 8, 10, 3, 8, 8, 8, 8, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */ 23700, 0x0d, 0x00, 72, 8, 14, 3, 9, 9, 9, 9, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */ 27400, 0x08, 0x00, 96, 8, 20, 3, 10, 10, 10, 10, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */ 30900, 0x0c, 0x00, 108, 8, 23, 3, 11, 11, 11, 11, 0 }, - { FALSE, FALSE, WLAN_PHY_HT_20_SS, 6500, /* 6.5 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_20_SS, 6500, /* 6.5 Mb */ 6400, 0x80, 0x00, 0, 4, 2, 3, 12, 28, 12, 28, 3216 }, - { TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 13000, /* 13 Mb */ + { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 13000, /* 13 Mb */ 12700, 0x81, 0x00, 1, 6, 4, 3, 13, 29, 13, 29, 6434 }, - { TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 19500, /* 19.5 Mb */ + { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 19500, /* 19.5 Mb */ 18800, 0x82, 0x00, 2, 6, 6, 3, 14, 30, 14, 30, 9650 }, - { TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 26000, /* 26 Mb */ + { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 26000, /* 26 Mb */ 25000, 0x83, 0x00, 3, 8, 10, 3, 15, 31, 15, 31, 12868 }, - { TRUE_20, TRUE_20, WLAN_PHY_HT_20_SS, 39000, /* 39 Mb */ + { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 39000, /* 39 Mb */ 36700, 0x84, 0x00, 4, 8, 14, 3, 16, 32, 16, 32, 19304 }, - { FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 52000, /* 52 Mb */ + { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 52000, /* 52 Mb */ 48100, 0x85, 0x00, 5, 8, 20, 3, 17, 33, 17, 33, 25740 }, - { FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 58500, /* 58.5 Mb */ + { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 58500, /* 58.5 Mb */ 53500, 0x86, 0x00, 6, 8, 23, 3, 18, 34, 18, 34, 28956 }, - { FALSE, TRUE_20, WLAN_PHY_HT_20_SS, 65000, /* 65 Mb */ + { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 65000, /* 65 Mb */ 59000, 0x87, 0x00, 7, 8, 25, 3, 19, 35, 19, 36, 32180 }, - { FALSE, FALSE, WLAN_PHY_HT_20_DS, 13000, /* 13 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 13000, /* 13 Mb */ 12700, 0x88, 0x00, 8, 4, 2, 3, 20, 37, 20, 37, 6430 }, - { FALSE, FALSE, WLAN_PHY_HT_20_DS, 26000, /* 26 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 26000, /* 26 Mb */ 24800, 0x89, 0x00, 9, 6, 4, 3, 21, 38, 21, 38, 12860 }, - { FALSE, FALSE, WLAN_PHY_HT_20_DS, 39000, /* 39 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 39000, /* 39 Mb */ 36600, 0x8a, 0x00, 10, 6, 6, 3, 22, 39, 22, 39, 19300 }, - { TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 52000, /* 52 Mb */ + { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 52000, /* 52 Mb */ 48100, 0x8b, 0x00, 11, 8, 10, 3, 23, 40, 23, 40, 25736 }, - { TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 78000, /* 78 Mb */ + { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 78000, /* 78 Mb */ 69500, 0x8c, 0x00, 12, 8, 14, 3, 24, 41, 24, 41, 38600 }, - { TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 104000, /* 104 Mb */ + { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 104000, /* 104 Mb */ 89500, 0x8d, 0x00, 13, 8, 20, 3, 25, 42, 25, 42, 51472 }, - { TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 117000, /* 117 Mb */ + { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 117000, /* 117 Mb */ 98900, 0x8e, 0x00, 14, 8, 23, 3, 26, 43, 26, 44, 57890 }, - { TRUE_20, FALSE, WLAN_PHY_HT_20_DS, 130000, /* 130 Mb */ + { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 130000, /* 130 Mb */ 108300, 0x8f, 0x00, 15, 8, 25, 3, 27, 44, 27, 45, 64320 }, - { TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 13500, /* 13.5 Mb */ + { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 13500, /* 13.5 Mb */ 13200, 0x80, 0x00, 0, 8, 2, 3, 12, 28, 28, 28, 6684 }, - { TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 27500, /* 27.0 Mb */ + { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 27500, /* 27.0 Mb */ 25900, 0x81, 0x00, 1, 8, 4, 3, 13, 29, 29, 29, 13368 }, - { TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 40500, /* 40.5 Mb */ + { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 40500, /* 40.5 Mb */ 38600, 0x82, 0x00, 2, 8, 6, 3, 14, 30, 30, 30, 20052 }, - { TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 54000, /* 54 Mb */ + { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 54000, /* 54 Mb */ 49800, 0x83, 0x00, 3, 8, 10, 3, 15, 31, 31, 31, 26738 }, - { TRUE_40, TRUE_40, WLAN_PHY_HT_40_SS, 81500, /* 81 Mb */ + { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 81500, /* 81 Mb */ 72200, 0x84, 0x00, 4, 8, 14, 3, 16, 32, 32, 32, 40104 }, - { FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 108000, /* 108 Mb */ + { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 108000, /* 108 Mb */ 92900, 0x85, 0x00, 5, 8, 20, 3, 17, 33, 33, 33, 53476 }, - { FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 121500, /* 121.5 Mb */ + { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 121500, /* 121.5 Mb */ 102700, 0x86, 0x00, 6, 8, 23, 3, 18, 34, 34, 34, 60156 }, - { FALSE, TRUE_40, WLAN_PHY_HT_40_SS, 135000, /* 135 Mb */ + { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 135000, /* 135 Mb */ 112000, 0x87, 0x00, 7, 8, 23, 3, 19, 35, 36, 36, 66840 }, - { FALSE, TRUE_40, WLAN_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */ + { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */ 122000, 0x87, 0x00, 7, 8, 25, 3, 19, 35, 36, 36, 74200 }, - { FALSE, FALSE, WLAN_PHY_HT_40_DS, 27000, /* 27 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 27000, /* 27 Mb */ 25800, 0x88, 0x00, 8, 8, 2, 3, 20, 37, 37, 37, 13360 }, - { FALSE, FALSE, WLAN_PHY_HT_40_DS, 54000, /* 54 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 54000, /* 54 Mb */ 49800, 0x89, 0x00, 9, 8, 4, 3, 21, 38, 38, 38, 26720 }, - { FALSE, FALSE, WLAN_PHY_HT_40_DS, 81000, /* 81 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 81000, /* 81 Mb */ 71900, 0x8a, 0x00, 10, 8, 6, 3, 22, 39, 39, 39, 40080 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 108000, /* 108 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 108000, /* 108 Mb */ 92500, 0x8b, 0x00, 11, 8, 10, 3, 23, 40, 40, 40, 53440 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 162000, /* 162 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 162000, /* 162 Mb */ 130300, 0x8c, 0x00, 12, 8, 14, 3, 24, 41, 41, 41, 80160 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 216000, /* 216 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 216000, /* 216 Mb */ 162800, 0x8d, 0x00, 13, 8, 20, 3, 25, 42, 42, 42, 106880 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 243000, /* 243 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 243000, /* 243 Mb */ 178200, 0x8e, 0x00, 14, 8, 23, 3, 26, 43, 43, 43, 120240 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS, 270000, /* 270 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 270000, /* 270 Mb */ 192100, 0x8f, 0x00, 15, 8, 23, 3, 27, 44, 45, 45, 133600 }, - { TRUE_40, FALSE, WLAN_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */ + { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */ 207000, 0x8f, 0x00, 15, 8, 25, 3, 27, 44, 45, 45, 148400 }, }, @@ -319,28 +313,28 @@ static struct ath_rate_table ar5416_11a_ratetable = { 8, {0}, { - { TRUE, TRUE, WLAN_PHY_OFDM, 6000, /* 6 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ 5400, 0x0b, 0x00, (0x80|12), 0, 2, 1, 0, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 9000, /* 9 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */ 7800, 0x0f, 0x00, 18, 0, 3, 1, 1, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */ 10000, 0x0a, 0x00, (0x80|24), 2, 4, 2, 2, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */ 13900, 0x0e, 0x00, 36, 2, 6, 2, 3, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */ 17300, 0x09, 0x00, (0x80|48), 4, 10, 3, 4, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */ 23000, 0x0d, 0x00, 72, 4, 14, 3, 5, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */ 27400, 0x08, 0x00, 96, 4, 19, 3, 6, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */ 29300, 0x0c, 0x00, 108, 4, 23, 3, 7, 0 }, }, @@ -353,40 +347,40 @@ static struct ath_rate_table ar5416_11g_ratetable = { 12, {0}, { - { TRUE, TRUE, WLAN_PHY_CCK, 1000, /* 1 Mb */ + { VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */ 900, 0x1b, 0x00, 2, 0, 0, 1, 0, 0 }, - { TRUE, TRUE, WLAN_PHY_CCK, 2000, /* 2 Mb */ + { VALID, VALID, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */ 1900, 0x1a, 0x04, 4, 1, 1, 1, 1, 0 }, - { TRUE, TRUE, WLAN_PHY_CCK, 5500, /* 5.5 Mb */ + { VALID, VALID, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */ 4900, 0x19, 0x04, 11, 2, 2, 2, 2, 0 }, - { TRUE, TRUE, WLAN_PHY_CCK, 11000, /* 11 Mb */ + { VALID, VALID, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */ 8100, 0x18, 0x04, 22, 3, 3, 2, 3, 0 }, - { FALSE, FALSE, WLAN_PHY_OFDM, 6000, /* 6 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */ 5400, 0x0b, 0x00, 12, 4, 2, 1, 4, 0 }, - { FALSE, FALSE, WLAN_PHY_OFDM, 9000, /* 9 Mb */ + { INVALID, INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */ 7800, 0x0f, 0x00, 18, 4, 3, 1, 5, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 12000, /* 12 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */ 10000, 0x0a, 0x00, 24, 6, 4, 1, 6, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 18000, /* 18 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */ 13900, 0x0e, 0x00, 36, 6, 6, 2, 7, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 24000, /* 24 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */ 17300, 0x09, 0x00, 48, 8, 10, 3, 8, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 36000, /* 36 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */ 23000, 0x0d, 0x00, 72, 8, 14, 3, 9, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 48000, /* 48 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */ 27400, 0x08, 0x00, 96, 8, 19, 3, 10, 0 }, - { TRUE, TRUE, WLAN_PHY_OFDM, 54000, /* 54 Mb */ + { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */ 29300, 0x0c, 0x00, 108, 8, 23, 3, 11, 0 }, }, @@ -399,16 +393,16 @@ static struct ath_rate_table ar5416_11b_ratetable = { 4, {0}, { - { TRUE, TRUE, WLAN_PHY_CCK, 1000, /* 1 Mb */ + { VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */ 900, 0x1b, 0x00, (0x80|2), 0, 0, 1, 0, 0 }, - { TRUE, TRUE, WLAN_PHY_CCK, 2000, /* 2 Mb */ + { VALID, VALID, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */ 1800, 0x1a, 0x04, (0x80|4), 1, 1, 1, 1, 0 }, - { TRUE, TRUE, WLAN_PHY_CCK, 5500, /* 5.5 Mb */ + { VALID, VALID, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */ 4300, 0x19, 0x04, (0x80|11), 1, 2, 2, 2, 0 }, - { TRUE, TRUE, WLAN_PHY_CCK, 11000, /* 11 Mb */ + { VALID, VALID, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */ 7100, 0x18, 0x04, (0x80|22), 1, 4, 100, 3, 0 }, }, @@ -417,9 +411,6 @@ static struct ath_rate_table ar5416_11b_ratetable = { 0, /* Phy rates allowed initially */ }; -/* - * Return the median of three numbers - */ static inline int8_t median(int8_t a, int8_t b, int8_t c) { if (a >= b) { @@ -440,7 +431,7 @@ static inline int8_t median(int8_t a, int8_t b, int8_t c) } static void ath_rc_sort_validrates(struct ath_rate_table *rate_table, - struct ath_rate_node *ath_rc_priv) + struct ath_rate_priv *ath_rc_priv) { u8 i, j, idx, idx_next; @@ -458,34 +449,31 @@ static void ath_rc_sort_validrates(struct ath_rate_table *rate_table, } } -/* Access functions for valid_txrate_mask */ - -static void ath_rc_init_valid_txmask(struct ath_rate_node *ath_rc_priv) +static void ath_rc_init_valid_txmask(struct ath_rate_priv *ath_rc_priv) { u8 i; for (i = 0; i < ath_rc_priv->rate_table_size; i++) - ath_rc_priv->valid_rate_index[i] = FALSE; + ath_rc_priv->valid_rate_index[i] = 0; } -static inline void ath_rc_set_valid_txmask(struct ath_rate_node *ath_rc_priv, +static inline void ath_rc_set_valid_txmask(struct ath_rate_priv *ath_rc_priv, u8 index, int valid_tx_rate) { ASSERT(index <= ath_rc_priv->rate_table_size); - ath_rc_priv->valid_rate_index[index] = valid_tx_rate ? TRUE : FALSE; + ath_rc_priv->valid_rate_index[index] = valid_tx_rate ? 1 : 0; } -static inline int ath_rc_isvalid_txmask(struct ath_rate_node *ath_rc_priv, +static inline int ath_rc_isvalid_txmask(struct ath_rate_priv *ath_rc_priv, u8 index) { ASSERT(index <= ath_rc_priv->rate_table_size); return ath_rc_priv->valid_rate_index[index]; } -/* Iterators for valid_txrate_mask */ static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, - struct ath_rate_node *ath_rc_priv, + struct ath_rate_priv *ath_rc_priv, u8 cur_valid_txrate, u8 *next_idx) { @@ -494,13 +482,13 @@ ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, for (i = 0; i < ath_rc_priv->max_valid_rate - 1; i++) { if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) { *next_idx = ath_rc_priv->valid_rate_index[i+1]; - return TRUE; + return 1; } } /* No more valid rates */ *next_idx = 0; - return FALSE; + return 0; } /* Return true only for single stream */ @@ -508,22 +496,22 @@ ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw) { if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG)) - return FALSE; + return 0; if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG)) - return FALSE; + return 0; if (WLAN_RC_PHY_SGI(phy) && !(capflag & WLAN_RC_SGI_FLAG)) - return FALSE; + return 0; if (!ignore_cw && WLAN_RC_PHY_HT(phy)) if (WLAN_RC_PHY_40(phy) && !(capflag & WLAN_RC_40_FLAG)) - return FALSE; + return 0; if (!WLAN_RC_PHY_40(phy) && (capflag & WLAN_RC_40_FLAG)) - return FALSE; - return TRUE; + return 0; + return 1; } static inline int ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table, - struct ath_rate_node *ath_rc_priv, + struct ath_rate_priv *ath_rc_priv, u8 cur_valid_txrate, u8 *next_idx) { int8_t i; @@ -531,17 +519,14 @@ ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table, for (i = 1; i < ath_rc_priv->max_valid_rate ; i++) { if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) { *next_idx = ath_rc_priv->valid_rate_index[i-1]; - return TRUE; + return 1; } } - return FALSE; + return 0; } -/* - * Initialize the Valid Rate Index from valid entries in Rate Table - */ static u8 -ath_rc_sib_init_validrates(struct ath_rate_node *ath_rc_priv, +ath_rc_sib_init_validrates(struct ath_rate_priv *ath_rc_priv, struct ath_rate_table *rate_table, u32 capflag) { @@ -552,34 +537,30 @@ ath_rc_sib_init_validrates(struct ath_rate_node *ath_rc_priv, valid = (ath_rc_priv->single_stream ? rate_table->info[i].valid_single_stream : rate_table->info[i].valid); - if (valid == TRUE) { + if (valid == 1) { u32 phy = rate_table->info[i].phy; u8 valid_rate_count = 0; - if (!ath_rc_valid_phyrate(phy, capflag, FALSE)) + if (!ath_rc_valid_phyrate(phy, capflag, 0)) continue; valid_rate_count = ath_rc_priv->valid_phy_ratecnt[phy]; ath_rc_priv->valid_phy_rateidx[phy][valid_rate_count] = i; ath_rc_priv->valid_phy_ratecnt[phy] += 1; - ath_rc_set_valid_txmask(ath_rc_priv, i, TRUE); + ath_rc_set_valid_txmask(ath_rc_priv, i, 1); hi = A_MAX(hi, i); } } return hi; } -/* - * Initialize the Valid Rate Index from Rate Set - */ static u8 -ath_rc_sib_setvalid_rates(struct ath_rate_node *ath_rc_priv, +ath_rc_sib_setvalid_rates(struct ath_rate_priv *ath_rc_priv, struct ath_rate_table *rate_table, struct ath_rateset *rateset, u32 capflag) { - /* XXX: Clean me up and make identation friendly */ u8 i, j, hi = 0; /* Use intersection of working rates and valid rates */ @@ -592,10 +573,8 @@ ath_rc_sib_setvalid_rates(struct ath_rate_node *ath_rc_priv, /* We allow a rate only if its valid and the * capflag matches one of the validity - * (TRUE/TRUE_20/TRUE_40) flags */ + * (VALID/VALID_20/VALID_40) flags */ - /* XXX: catch the negative of this branch - * first and then continue */ if (((rateset->rs_rates[i] & 0x7F) == (rate_table->info[j].dot11rate & 0x7F)) && ((valid & WLAN_RC_CAP_MODE(capflag)) == @@ -604,7 +583,7 @@ ath_rc_sib_setvalid_rates(struct ath_rate_node *ath_rc_priv, u8 valid_rate_count = 0; - if (!ath_rc_valid_phyrate(phy, capflag, FALSE)) + if (!ath_rc_valid_phyrate(phy, capflag, 0)) continue; valid_rate_count = @@ -613,7 +592,7 @@ ath_rc_sib_setvalid_rates(struct ath_rate_node *ath_rc_priv, ath_rc_priv->valid_phy_rateidx[phy] [valid_rate_count] = j; ath_rc_priv->valid_phy_ratecnt[phy] += 1; - ath_rc_set_valid_txmask(ath_rc_priv, j, TRUE); + ath_rc_set_valid_txmask(ath_rc_priv, j, 1); hi = A_MAX(hi, j); } } @@ -622,7 +601,7 @@ ath_rc_sib_setvalid_rates(struct ath_rate_node *ath_rc_priv, } static u8 -ath_rc_sib_setvalid_htrates(struct ath_rate_node *ath_rc_priv, +ath_rc_sib_setvalid_htrates(struct ath_rate_priv *ath_rc_priv, struct ath_rate_table *rate_table, u8 *mcs_set, u32 capflag) { @@ -643,13 +622,13 @@ ath_rc_sib_setvalid_htrates(struct ath_rate_node *ath_rc_priv, !WLAN_RC_PHY_HT_VALID(valid, capflag)) continue; - if (!ath_rc_valid_phyrate(phy, capflag, FALSE)) + if (!ath_rc_valid_phyrate(phy, capflag, 0)) continue; ath_rc_priv->valid_phy_rateidx[phy] [ath_rc_priv->valid_phy_ratecnt[phy]] = j; ath_rc_priv->valid_phy_ratecnt[phy] += 1; - ath_rc_set_valid_txmask(ath_rc_priv, j, TRUE); + ath_rc_set_valid_txmask(ath_rc_priv, j, 1); hi = A_MAX(hi, j); } } @@ -676,7 +655,7 @@ u8 ath_rate_findrateix(struct ath_softc *sc, } static u8 ath_rc_ratefind_ht(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, + struct ath_rate_priv *ath_rc_priv, struct ath_rate_table *rate_table, int probe_allowed, int *is_probing, int is_retry) @@ -685,7 +664,7 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, u8 rate, next_rate, best_rate, maxindex, minindex; int8_t rssi_last, rssi_reduce = 0, index = 0; - *is_probing = FALSE; + *is_probing = 0; rssi_last = median(ath_rc_priv->rssi_last, ath_rc_priv->rssi_last_prev, @@ -789,16 +768,10 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, ath_rc_priv->probe_rate = rate; ath_rc_priv->probe_time = now_msec; ath_rc_priv->hw_maxretry_pktcnt = 0; - *is_probing = TRUE; + *is_probing = 1; } } - /* - * Make sure rate is not higher than the allowed maximum. - * We should also enforce the min, but I suspect the min is - * normally 1 rather than 0 because of the rate 9 vs 6 issue - * in the old code. - */ if (rate > (ath_rc_priv->rate_table_size - 1)) rate = ath_rc_priv->rate_table_size - 1; @@ -829,7 +802,7 @@ static void ath_rc_rate_set_series(struct ath_rate_table *rate_table , } static u8 ath_rc_rate_getidx(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, + struct ath_rate_priv *ath_rc_priv, struct ath_rate_table *rate_table, u8 rix, u16 stepdown, u16 min_rate) @@ -858,8 +831,8 @@ static u8 ath_rc_rate_getidx(struct ath_softc *sc, } static void ath_rc_ratefind(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - int num_tries, int num_rates, unsigned int rcflag, + struct ath_rate_priv *ath_rc_priv, + int num_tries, int num_rates, struct ieee80211_tx_info *tx_info, int *is_probe, int is_retry) { @@ -868,30 +841,29 @@ static void ath_rc_ratefind(struct ath_softc *sc, struct ieee80211_tx_rate *rates = tx_info->control.rates; rate_table = sc->hw_rate_table[sc->sc_curmode]; - rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, - (rcflag & ATH_RC_PROBE_ALLOWED) ? 1 : 0, + rix = ath_rc_ratefind_ht(sc, ath_rc_priv, rate_table, 1, is_probe, is_retry); nrix = rix; - if ((rcflag & ATH_RC_PROBE_ALLOWED) && (*is_probe)) { + if (*is_probe) { /* set one try for probe rates. For the * probes don't enable rts */ ath_rc_rate_set_series(rate_table, - &rates[i++], 1, nrix, FALSE); + &rates[i++], 1, nrix, 0); try_per_rate = (num_tries/num_rates); /* Get the next tried/allowed rate. No RTS for the next series * after the probe rate */ nrix = ath_rc_rate_getidx(sc, - ath_rc_priv, rate_table, nrix, 1, FALSE); + ath_rc_priv, rate_table, nrix, 1, 0); ath_rc_rate_set_series(rate_table, &rates[i++], try_per_rate, nrix, 0); } else { try_per_rate = (num_tries/num_rates); /* Set the choosen rate. No RTS for first series entry. */ ath_rc_rate_set_series(rate_table, - &rates[i++], try_per_rate, nrix, FALSE); + &rates[i++], try_per_rate, nrix, 0); } /* Fill in the other rates for multirate retry */ @@ -901,14 +873,13 @@ static void ath_rc_ratefind(struct ath_softc *sc, try_num = ((i + 1) == num_rates) ? num_tries - (try_per_rate * i) : try_per_rate ; - min_rate = (((i + 1) == num_rates) && - (rcflag & ATH_RC_MINRATE_LASTRATE)) ? 1 : 0; + min_rate = (((i + 1) == num_rates) && 0); nrix = ath_rc_rate_getidx(sc, ath_rc_priv, rate_table, nrix, 1, min_rate); /* All other rates in the series have RTS enabled */ ath_rc_rate_set_series(rate_table, - &rates[i], try_num, nrix, TRUE); + &rates[i], try_num, nrix, 1); } /* @@ -940,32 +911,13 @@ static void ath_rc_ratefind(struct ath_softc *sc, } } -/* - * Return the Tx rate series. - */ -static void ath_rate_findrate(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - int num_tries, - int num_rates, - unsigned int rcflag, - struct ieee80211_tx_info *tx_info, - int *is_probe, - int is_retry) -{ - if (!num_rates || !num_tries) - return; - - ath_rc_ratefind(sc, ath_rc_priv, num_tries, num_rates, - rcflag, tx_info, is_probe, is_retry); -} - static void ath_rc_update_ht(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - struct ath_tx_info_priv *info_priv, + struct ath_rate_priv *ath_rc_priv, + struct ath_tx_info_priv *tx_info_priv, int tx_rate, int xretries, int retries) { u32 now_msec = jiffies_to_msecs(jiffies); - int state_change = FALSE, rate, count; + int state_change = 0, rate, count; u8 last_per; struct ath_rate_table *rate_table = sc->hw_rate_table[sc->sc_curmode]; static u32 nretry_to_per_lookup[10] = { @@ -991,9 +943,9 @@ static void ath_rc_update_ht(struct ath_softc *sc, /* To compensate for some imbalance between ctrl and ext. channel */ if (WLAN_RC_PHY_40(rate_table->info[tx_rate].phy)) - info_priv->tx.ts_rssi = - info_priv->tx.ts_rssi < 3 ? 0 : - info_priv->tx.ts_rssi - 3; + tx_info_priv->tx.ts_rssi = + tx_info_priv->tx.ts_rssi < 3 ? 0 : + tx_info_priv->tx.ts_rssi - 3; last_per = ath_rc_priv->state[tx_rate].per; @@ -1026,7 +978,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, count = ARRAY_SIZE(nretry_to_per_lookup); if (retries >= count) retries = count - 1; - if (info_priv->n_bad_frames) { + if (tx_info_priv->n_bad_frames) { /* new_PER = 7/8*old_PER + 1/8*(currentPER) * Assuming that n_frames is not 0. The current PER * from the retries is 100 * retries / (retries+1), @@ -1039,14 +991,14 @@ static void ath_rc_update_ht(struct ath_softc *sc, * the above PER. The expression below is a * simplified version of the sum of these two terms. */ - if (info_priv->n_frames > 0) + if (tx_info_priv->n_frames > 0) ath_rc_priv->state[tx_rate].per = (u8) (ath_rc_priv->state[tx_rate].per - (ath_rc_priv->state[tx_rate].per >> 3) + - ((100*(retries*info_priv->n_frames + - info_priv->n_bad_frames) / - (info_priv->n_frames * + ((100*(retries*tx_info_priv->n_frames + + tx_info_priv->n_bad_frames) / + (tx_info_priv->n_frames * (retries+1))) >> 3)); } else { /* new_PER = 7/8*old_PER + 1/8*(currentPER) */ @@ -1059,7 +1011,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, ath_rc_priv->rssi_last_prev2 = ath_rc_priv->rssi_last_prev; ath_rc_priv->rssi_last_prev = ath_rc_priv->rssi_last; - ath_rc_priv->rssi_last = info_priv->tx.ts_rssi; + ath_rc_priv->rssi_last = tx_info_priv->tx.ts_rssi; ath_rc_priv->rssi_time = now_msec; /* @@ -1068,8 +1020,8 @@ static void ath_rc_update_ht(struct ath_softc *sc, */ if (ath_rc_priv->probe_rate && ath_rc_priv->probe_rate == tx_rate) { - if (retries > 0 || 2 * info_priv->n_bad_frames > - info_priv->n_frames) { + if (retries > 0 || 2 * tx_info_priv->n_bad_frames > + tx_info_priv->n_frames) { /* * Since we probed with just a single attempt, * any retries means the probe failed. Also, @@ -1121,7 +1073,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, ath_rc_priv->hw_maxretry_pktcnt++; } - if (info_priv->tx.ts_rssi >= + if (tx_info_priv->tx.ts_rssi >= rate_table->info[tx_rate].rssi_ack_validmin) { /* Average the rssi */ if (tx_rate != ath_rc_priv->rssi_sum_rate) { @@ -1130,7 +1082,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, ath_rc_priv->rssi_sum_cnt = 0; } - ath_rc_priv->rssi_sum += info_priv->tx.ts_rssi; + ath_rc_priv->rssi_sum += tx_info_priv->tx.ts_rssi; ath_rc_priv->rssi_sum_cnt++; if (ath_rc_priv->rssi_sum_cnt > 4) { @@ -1154,7 +1106,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, rssi_thres--; } - state_change = TRUE; + state_change = 1; } } } @@ -1282,17 +1234,12 @@ static void ath_rc_update_ht(struct ath_softc *sc, } } -/* - * This routine is called in rate control callback tx_status() to give - * the status of previous frames. - */ -static void ath_rc_update(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, - struct ieee80211_tx_info *tx_info, int final_ts_idx, - int xretries, int long_retry) +static void ath_rc_tx_status(struct ath_softc *sc, + struct ath_rate_priv *ath_rc_priv, + struct ieee80211_tx_info *tx_info, + int final_ts_idx, int xretries, int long_retry) { - struct ath_tx_info_priv *info_priv = - (struct ath_tx_info_priv *)tx_info->rate_driver_data[0]; + struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info); struct ath_rate_table *rate_table; struct ieee80211_tx_rate *rates = tx_info->status.rates; u8 flags; @@ -1329,7 +1276,7 @@ static void ath_rc_update(struct ath_softc *sc, rix = rate_table->info[ rates[series].idx].base_index; ath_rc_update_ht(sc, ath_rc_priv, - info_priv, rix, + tx_info_priv, rix, xretries ? 1 : 2, rates[series].count); } @@ -1361,55 +1308,12 @@ static void ath_rc_update(struct ath_softc *sc, else rix = rate_table->info[rates[series].idx].base_index; - ath_rc_update_ht(sc, ath_rc_priv, info_priv, rix, + ath_rc_update_ht(sc, ath_rc_priv, tx_info_priv, rix, xretries, long_retry); } -/* - * Process a tx descriptor for a completed transmit (success or failure). - */ -static void ath_rate_tx_complete(struct ath_softc *sc, - struct ath_node *an, - struct ath_rate_node *rc_priv, - struct ieee80211_tx_info *tx_info) -{ - struct ath_tx_info_priv *info_priv = - (struct ath_tx_info_priv *)tx_info->rate_driver_data[0]; - int final_ts_idx = info_priv->tx.ts_rateindex; - int tx_status = 0, is_underrun = 0; - - if (info_priv->tx.ts_status & ATH9K_TXERR_FILT) - return; - - if (info_priv->tx.ts_rssi > 0) { - ATH_RSSI_LPF(an->an_chainmask_sel.tx_avgrssi, - info_priv->tx.ts_rssi); - } - - /* - * If underrun error is seen assume it as an excessive retry only - * if prefetch trigger level have reached the max (0x3f for 5416) - * Adjust the long retry as if the frame was tried ATH_11N_TXMAXTRY - * times. This affects how ratectrl updates PER for the failed rate. - */ - if (info_priv->tx.ts_flags & - (ATH9K_TX_DATA_UNDERRUN | ATH9K_TX_DELIM_UNDERRUN) && - ((sc->sc_ah->ah_txTrigLevel) >= rc_priv->tx_triglevel_max)) { - tx_status = 1; - is_underrun = 1; - } - - if ((info_priv->tx.ts_status & ATH9K_TXERR_XRETRY) || - (info_priv->tx.ts_status & ATH9K_TXERR_FIFO)) - tx_status = 1; - - ath_rc_update(sc, rc_priv, tx_info, final_ts_idx, tx_status, - (is_underrun) ? ATH_11N_TXMAXTRY : - info_priv->tx.ts_longretry); -} - static void ath_rc_init(struct ath_softc *sc, - struct ath_rate_node *ath_rc_priv, + struct ath_rate_priv *ath_rc_priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta) { @@ -1427,13 +1331,14 @@ static void ath_rc_init(struct ath_softc *sc, rate_table = sc->hw_rate_table[ATH9K_MODE_11NA_HT20]; ath_rc_priv->ht_cap = (WLAN_RC_HT_FLAG | WLAN_RC_DS_FLAG); + if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ath_rc_priv->ht_cap |= WLAN_RC_40_FLAG; } /* Initial rate table size. Will change depending * on the working rate set */ - ath_rc_priv->rate_table_size = MAX_TX_RATE_TBL; + ath_rc_priv->rate_table_size = RATE_TABLE_SIZE; /* Initialize thresholds according to the global rate table */ for (i = 0 ; i < ath_rc_priv->rate_table_size; i++) { @@ -1474,7 +1379,7 @@ static void ath_rc_init(struct ath_softc *sc, ath_rc_priv->rate_table_size = hi + 1; ath_rc_priv->rate_max_phy = 0; - ASSERT(ath_rc_priv->rate_table_size <= MAX_TX_RATE_TBL); + ASSERT(ath_rc_priv->rate_table_size <= RATE_TABLE_SIZE); for (i = 0, k = 0; i < WLAN_RC_PHY_MAX; i++) { for (j = 0; j < ath_rc_priv->valid_phy_ratecnt[i]; j++) { @@ -1482,21 +1387,16 @@ static void ath_rc_init(struct ath_softc *sc, ath_rc_priv->valid_phy_rateidx[i][j]; } - if (!ath_rc_valid_phyrate(i, rate_table->initial_ratemax, TRUE) + if (!ath_rc_valid_phyrate(i, rate_table->initial_ratemax, 1) || !ath_rc_priv->valid_phy_ratecnt[i]) continue; ath_rc_priv->rate_max_phy = ath_rc_priv->valid_phy_rateidx[i][j-1]; } - ASSERT(ath_rc_priv->rate_table_size <= MAX_TX_RATE_TBL); - ASSERT(k <= MAX_TX_RATE_TBL); + ASSERT(ath_rc_priv->rate_table_size <= RATE_TABLE_SIZE); + ASSERT(k <= RATE_TABLE_SIZE); ath_rc_priv->max_valid_rate = k; - /* - * Some third party vendors don't send the supported rate series in - * order. So sorting to make sure its in order, otherwise our RateFind - * Algo will select wrong rates - */ ath_rc_sort_validrates(rate_table, ath_rc_priv); ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4]; } @@ -1507,24 +1407,53 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, struct sk_buff *skb) { struct ath_softc *sc = priv; - struct ath_tx_info_priv *tx_info_priv; + struct ath_rate_priv *ath_rc_priv = priv_sta; + struct ath_tx_info_priv *tx_info_priv = NULL; struct ath_node *an; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *hdr; + int final_ts_idx, tx_status = 0, is_underrun = 0; __le16 fc; hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; - tx_info_priv = (struct ath_tx_info_priv *)tx_info->rate_driver_data[0]; - + tx_info_priv = ATH_TX_INFO_PRIV(tx_info); an = (struct ath_node *)sta->drv_priv; + final_ts_idx = tx_info_priv->tx.ts_rateindex; - if (tx_info_priv == NULL) - return; + if (!an || !priv_sta || !ieee80211_is_data(fc)) + goto exit; - if (an && priv_sta && ieee80211_is_data(fc)) - ath_rate_tx_complete(sc, an, priv_sta, tx_info); + if (tx_info_priv->tx.ts_status & ATH9K_TXERR_FILT) + goto exit; + if (tx_info_priv->tx.ts_rssi > 0) { + ATH_RSSI_LPF(an->an_chainmask_sel.tx_avgrssi, + tx_info_priv->tx.ts_rssi); + } + + /* + * If underrun error is seen assume it as an excessive retry only + * if prefetch trigger level have reached the max (0x3f for 5416) + * Adjust the long retry as if the frame was tried ATH_11N_TXMAXTRY + * times. This affects how ratectrl updates PER for the failed rate. + */ + if (tx_info_priv->tx.ts_flags & + (ATH9K_TX_DATA_UNDERRUN | ATH9K_TX_DELIM_UNDERRUN) && + ((sc->sc_ah->ah_txTrigLevel) >= ath_rc_priv->tx_triglevel_max)) { + tx_status = 1; + is_underrun = 1; + } + + if ((tx_info_priv->tx.ts_status & ATH9K_TXERR_XRETRY) || + (tx_info_priv->tx.ts_status & ATH9K_TXERR_FIFO)) + tx_status = 1; + + ath_rc_tx_status(sc, ath_rc_priv, tx_info, final_ts_idx, tx_status, + (is_underrun) ? ATH_11N_TXMAXTRY : + tx_info_priv->tx.ts_longretry); + +exit: kfree(tx_info_priv); } @@ -1536,12 +1465,10 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ath_softc *sc = priv; struct ieee80211_hw *hw = sc->hw; - struct ath_rate_node *ath_rc_priv = priv_sta; - struct ath_node *an; + struct ath_rate_priv *ath_rc_priv = priv_sta; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - int is_probe = FALSE; + int is_probe = 0; __le16 fc = hdr->frame_control; - u8 *qc, tid; /* lowest rate for management and multicast/broadcast frames */ if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) { @@ -1552,16 +1479,15 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, } /* Find tx rate for unicast frames */ - ath_rate_findrate(sc, ath_rc_priv, - ATH_11N_TXMAXTRY, 4, - ATH_RC_PROBE_ALLOWED, - tx_info, - &is_probe, - false); + ath_rc_ratefind(sc, ath_rc_priv, ATH_11N_TXMAXTRY, 4, + tx_info, &is_probe, false); /* Check if aggregation has to be enabled for this tid */ if (hw->conf.ht.enabled) { if (ieee80211_is_data_qos(fc)) { + u8 *qc, tid; + struct ath_node *an; + qc = ieee80211_get_qos_ctl(hdr); tid = qc[0] & 0xf; an = (struct ath_node *)sta->drv_priv; @@ -1576,7 +1502,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta) { struct ath_softc *sc = priv; - struct ath_rate_node *ath_rc_priv = priv_sta; + struct ath_rate_priv *ath_rc_priv = priv_sta; int i, j = 0; for (i = 0; i < sband->n_bitrates; i++) { @@ -1614,9 +1540,9 @@ static void ath_rate_free(void *priv) static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp) { struct ath_softc *sc = priv; - struct ath_rate_node *rate_priv; + struct ath_rate_priv *rate_priv; - rate_priv = kzalloc(sizeof(struct ath_rate_node), gfp); + rate_priv = kzalloc(sizeof(struct ath_rate_priv), gfp); if (!rate_priv) { DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to allocate private rc structure\n", @@ -1633,7 +1559,7 @@ static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta, void *priv_sta) { - struct ath_rate_node *rate_priv = priv_sta; + struct ath_rate_priv *rate_priv = priv_sta; kfree(rate_priv); } diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index c1e370c7c681..dff4b7ade3df 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -20,73 +20,19 @@ #define RC_H #include "ath9k.h" -/* - * Interface definitions for transmit rate control modules for the - * Atheros driver. - * - * A rate control module is responsible for choosing the transmit rate - * for each data frame. Management+control frames are always sent at - * a fixed rate. - * - * Only one module may be present at a time; the driver references - * rate control interfaces by symbol name. If multiple modules are - * to be supported we'll need to switch to a registration-based scheme - * as is currently done, for example, for authentication modules. - * - * An instance of the rate control module is attached to each device - * at attach time and detached when the device is destroyed. The module - * may associate data with each device and each node (station). Both - * sets of storage are opaque except for the size of the per-node storage - * which must be provided when the module is attached. - * - * The rate control module is notified for each state transition and - * station association/reassociation. Otherwise it is queried for a - * rate for each outgoing frame and provided status from each transmitted - * frame. Any ancillary processing is the responsibility of the module - * (e.g. if periodic processing is required then the module should setup - * it's own timer). - * - * In addition to the transmit rate for each frame the module must also - * indicate the number of attempts to make at the specified rate. If this - * number is != ATH_TXMAXTRY then an additional callback is made to setup - * additional transmit state. The rate control code is assumed to write - * this additional data directly to the transmit descriptor. - */ struct ath_softc; -#define TRUE 1 -#define FALSE 0 - -#define ATH_RATE_MAX 30 - -#define WLAN_PHY_HT_20_SS WLAN_RC_PHY_HT_20_SS -#define WLAN_PHY_HT_20_DS WLAN_RC_PHY_HT_20_DS -#define WLAN_PHY_HT_20_DS_HGI WLAN_RC_PHY_HT_20_DS_HGI -#define WLAN_PHY_HT_40_SS WLAN_RC_PHY_HT_40_SS -#define WLAN_PHY_HT_40_SS_HGI WLAN_RC_PHY_HT_40_SS_HGI -#define WLAN_PHY_HT_40_DS WLAN_RC_PHY_HT_40_DS -#define WLAN_PHY_HT_40_DS_HGI WLAN_RC_PHY_HT_40_DS_HGI - -#define WLAN_PHY_OFDM PHY_OFDM -#define WLAN_PHY_CCK PHY_CCK +#define ATH_RATE_MAX 30 +#define RATE_TABLE_SIZE 64 +#define MAX_TX_RATE_PHY 48 -#define TRUE_20 0x2 -#define TRUE_40 0x4 -#define TRUE_2040 (TRUE_20|TRUE_40) -#define TRUE_ALL (TRUE_2040|TRUE) - -enum { - WLAN_RC_PHY_HT_20_SS = 4, - WLAN_RC_PHY_HT_20_DS, - WLAN_RC_PHY_HT_40_SS, - WLAN_RC_PHY_HT_40_DS, - WLAN_RC_PHY_HT_20_SS_HGI, - WLAN_RC_PHY_HT_20_DS_HGI, - WLAN_RC_PHY_HT_40_SS_HGI, - WLAN_RC_PHY_HT_40_DS_HGI, - WLAN_RC_PHY_MAX -}; +#define INVALID 0x0 +#define VALID 0x1 +#define VALID_20 0x2 +#define VALID_40 0x4 +#define VALID_2040 (VALID_20|VALID_40) +#define VALID_ALL (VALID_2040|VALID) #define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \ || (_phy == WLAN_RC_PHY_HT_40_DS) \ @@ -103,26 +49,22 @@ enum { #define WLAN_RC_PHY_HT(_phy) (_phy >= WLAN_RC_PHY_HT_20_SS) -/* Returns the capflag mode */ #define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ? \ - (capflag & WLAN_RC_40_FLAG) ? TRUE_40 : TRUE_20 : TRUE)) + (capflag & WLAN_RC_40_FLAG) ? VALID_40 : VALID_20 : VALID)) /* Return TRUE if flag supports HT20 && client supports HT20 or * return TRUE if flag supports HT40 && client supports HT40. * This is used becos some rates overlap between HT20/HT40. */ - -#define WLAN_RC_PHY_HT_VALID(flag, capflag) (((flag & TRUE_20) && !(capflag \ - & WLAN_RC_40_FLAG)) || ((flag & TRUE_40) && \ - (capflag & WLAN_RC_40_FLAG))) +#define WLAN_RC_PHY_HT_VALID(flag, capflag) \ + (((flag & VALID_20) && !(capflag & WLAN_RC_40_FLAG)) || \ + ((flag & VALID_40) && (capflag & WLAN_RC_40_FLAG))) #define WLAN_RC_DS_FLAG (0x01) #define WLAN_RC_40_FLAG (0x02) #define WLAN_RC_SGI_FLAG (0x04) #define WLAN_RC_HT_FLAG (0x08) -#define RATE_TABLE_SIZE 64 - /** * struct ath_rate_table - Rate Control table * @valid: valid for use in rate control @@ -139,7 +81,7 @@ enum { * @max_4ms_framelen: maximum frame length(bytes) for tx duration * @probe_interval: interval for rate control to probe for other rates * @rssi_reduce_interval: interval for rate control to reduce rssi - * @initial_ratemax: initial ratemax value used in ath_rc_sib_update() + * @initial_ratemax: initial ratemax value */ struct ath_rate_table { int rate_cnt; @@ -169,15 +111,6 @@ struct ath_rate_table { u8 initial_ratemax; }; -#define ATH_RC_PROBE_ALLOWED 0x00000001 -#define ATH_RC_MINRATE_LASTRATE 0x00000002 - -/* - * State structures for new rate adaptation code - */ -#define MAX_TX_RATE_TBL 64 -#define MAX_TX_RATE_PHY 48 - struct ath_tx_ratectrl_state { int8_t rssi_thres; /* required rssi for this rate (dB) */ u8 per; /* recent estimate of packet error rate (%) */ @@ -189,7 +122,7 @@ struct ath_rateset { }; /** - * struct ath_rate_node - Rate Control priv data + * struct ath_rate_priv - Rate Control priv data * @state: RC state * @rssi_last: last ACK rssi * @rssi_last_lookup: last ACK rssi used for lookup @@ -214,9 +147,7 @@ struct ath_rateset { * @neg_rates: Negotatied rates * @neg_ht_rates: Negotiated HT rates */ - -/* per-node state */ -struct ath_rate_node { +struct ath_rate_priv { int8_t rssi_last; int8_t rssi_last_lookup; int8_t rssi_last_prev; @@ -228,11 +159,11 @@ struct ath_rate_node { u8 probe_rate; u8 hw_maxretry_pktcnt; u8 max_valid_rate; - u8 valid_rate_index[MAX_TX_RATE_TBL]; + u8 valid_rate_index[RATE_TABLE_SIZE]; u8 ht_cap; u8 single_stream; u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX]; - u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL]; + u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE]; u8 rc_phy_mode; u8 rate_max_phy; u32 rssi_time; @@ -242,7 +173,7 @@ struct ath_rate_node { u32 probe_interval; u32 prev_data_rix; u32 tx_triglevel_max; - struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; + struct ath_tx_ratectrl_state state[RATE_TABLE_SIZE]; struct ath_rateset neg_rates; struct ath_rateset neg_ht_rates; struct ath_rate_softc *asc; @@ -254,6 +185,9 @@ struct ath_tx_info_priv { int n_bad_frames; }; +#define ATH_TX_INFO_PRIV(tx_info) \ + ((struct ath_tx_info_priv *)((tx_info)->rate_driver_data[0])) + void ath_rate_attach(struct ath_softc *sc); u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate); int ath_rate_control_register(void); diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index b2d0cca6f4a6..93317ce9ac8a 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -536,7 +536,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) * just CTS. Note that this is only done for OFDM/HT unicast frames. */ if (sc->sc_protmode != PROT_M_NONE && !(bf->bf_flags & ATH9K_TXDESC_NOACK) - && (rt->info[rix].phy == WLAN_PHY_OFDM || + && (rt->info[rix].phy == WLAN_RC_PHY_OFDM || WLAN_RC_PHY_HT(rt->info[rix].phy))) { if (sc->sc_protmode == PROT_M_RTSCTS) flags = ATH9K_TXDESC_RTSENA; -- cgit v1.2.2 From 2c5a744d43a6a08666930906742fbe704739ba6f Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:08:33 +0530 Subject: ath9k: Use helpers Break down huge functions, use helper functions or macros instead. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/rc.c | 386 ++++++++++++++++++++-------------------- drivers/net/wireless/ath9k/rc.h | 5 + 2 files changed, 194 insertions(+), 197 deletions(-) diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 51f51afa6da9..e118824625ba 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -153,11 +153,6 @@ static struct ath_rate_table ar5416_11na_ratetable = { WLAN_RC_HT_FLAG, /* Phy rates allowed initially */ }; -/* VALID_ALL - valid for 20/40/Legacy, - * VALID - Legacy only, - * VALID_20 - HT 20 only, - * VALID_40 - HT 40 only */ - /* 4ms frame limit not used for NG mode. The values filled * for HT are the 64K max aggregate limit */ @@ -471,11 +466,10 @@ static inline int ath_rc_isvalid_txmask(struct ath_rate_priv *ath_rc_priv, return ath_rc_priv->valid_rate_index[index]; } -static inline int -ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, - struct ath_rate_priv *ath_rc_priv, - u8 cur_valid_txrate, - u8 *next_idx) +static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, + struct ath_rate_priv *ath_rc_priv, + u8 cur_valid_txrate, + u8 *next_idx) { u8 i; @@ -488,6 +482,7 @@ ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, /* No more valid rates */ *next_idx = 0; + return 0; } @@ -522,13 +517,13 @@ ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table, return 1; } } + return 0; } -static u8 -ath_rc_sib_init_validrates(struct ath_rate_priv *ath_rc_priv, - struct ath_rate_table *rate_table, - u32 capflag) +static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv, + struct ath_rate_table *rate_table, + u32 capflag) { u8 i, hi = 0; u32 valid; @@ -552,14 +547,14 @@ ath_rc_sib_init_validrates(struct ath_rate_priv *ath_rc_priv, hi = A_MAX(hi, i); } } + return hi; } -static u8 -ath_rc_sib_setvalid_rates(struct ath_rate_priv *ath_rc_priv, - struct ath_rate_table *rate_table, - struct ath_rateset *rateset, - u32 capflag) +static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv, + struct ath_rate_table *rate_table, + struct ath_rateset *rateset, + u32 capflag) { u8 i, j, hi = 0; @@ -570,17 +565,17 @@ ath_rc_sib_setvalid_rates(struct ath_rate_priv *ath_rc_priv, u32 valid = (ath_rc_priv->single_stream ? rate_table->info[j].valid_single_stream : rate_table->info[j].valid); + u8 rate = rateset->rs_rates[i]; + u8 dot11rate = rate_table->info[j].dot11rate; /* We allow a rate only if its valid and the * capflag matches one of the validity * (VALID/VALID_20/VALID_40) flags */ - if (((rateset->rs_rates[i] & 0x7F) == - (rate_table->info[j].dot11rate & 0x7F)) && - ((valid & WLAN_RC_CAP_MODE(capflag)) == - WLAN_RC_CAP_MODE(capflag)) && - !WLAN_RC_PHY_HT(phy)) { - + if (((rate & 0x7F) == (dot11rate & 0x7F)) && + ((valid & WLAN_RC_CAP_MODE(capflag)) == + WLAN_RC_CAP_MODE(capflag)) && + !WLAN_RC_PHY_HT(phy)) { u8 valid_rate_count = 0; if (!ath_rc_valid_phyrate(phy, capflag, 0)) @@ -597,27 +592,29 @@ ath_rc_sib_setvalid_rates(struct ath_rate_priv *ath_rc_priv, } } } + return hi; } -static u8 -ath_rc_sib_setvalid_htrates(struct ath_rate_priv *ath_rc_priv, - struct ath_rate_table *rate_table, - u8 *mcs_set, u32 capflag) +static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv, + struct ath_rate_table *rate_table, + u8 *mcs_set, u32 capflag) { + struct ath_rateset *rateset = (struct ath_rateset *)mcs_set; + u8 i, j, hi = 0; /* Use intersection of working rates and valid rates */ - for (i = 0; i < ((struct ath_rateset *)mcs_set)->rs_nrates; i++) { + for (i = 0; i < rateset->rs_nrates; i++) { for (j = 0; j < rate_table->rate_cnt; j++) { u32 phy = rate_table->info[j].phy; u32 valid = (ath_rc_priv->single_stream ? rate_table->info[j].valid_single_stream : rate_table->info[j].valid); + u8 rate = rateset->rs_rates[i]; + u8 dot11rate = rate_table->info[j].dot11rate; - if (((((struct ath_rateset *) - mcs_set)->rs_rates[i] & 0x7F) != - (rate_table->info[j].dot11rate & 0x7F)) || + if (((rate & 0x7F) != (dot11rate & 0x7F)) || !WLAN_RC_PHY_HT(phy) || !WLAN_RC_PHY_HT_VALID(valid, capflag)) continue; @@ -632,26 +629,8 @@ ath_rc_sib_setvalid_htrates(struct ath_rate_priv *ath_rc_priv, hi = A_MAX(hi, j); } } - return hi; -} - -u8 ath_rate_findrateix(struct ath_softc *sc, - u8 dot11rate) -{ - struct ath_rate_table *ratetable; - int i; - - ratetable = sc->hw_rate_table[sc->sc_curmode]; - - if (WARN_ON(!ratetable)) - return 0; - - for (i = 0; i < ratetable->rate_cnt; i++) { - if ((ratetable->info[i].dot11rate & 0x7f) == (dot11rate & 0x7f)) - return i; - } - return 0; + return hi; } static u8 ath_rc_ratefind_ht(struct ath_softc *sc, @@ -784,9 +763,7 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc, static void ath_rc_rate_set_series(struct ath_rate_table *rate_table , struct ieee80211_tx_rate *rate, - u8 tries, - u8 rix, - int rtsctsenable) + u8 tries, u8 rix, int rtsctsenable) { rate->count = tries; rate->idx = rix; @@ -911,15 +888,16 @@ static void ath_rc_ratefind(struct ath_softc *sc, } } -static void ath_rc_update_ht(struct ath_softc *sc, - struct ath_rate_priv *ath_rc_priv, - struct ath_tx_info_priv *tx_info_priv, - int tx_rate, int xretries, int retries) +static bool ath_rc_update_per(struct ath_softc *sc, + struct ath_rate_table *rate_table, + struct ath_rate_priv *ath_rc_priv, + struct ath_tx_info_priv *tx_info_priv, + int tx_rate, int xretries, int retries, + u32 now_msec) { - u32 now_msec = jiffies_to_msecs(jiffies); - int state_change = 0, rate, count; + bool state_change = false; + int count; u8 last_per; - struct ath_rate_table *rate_table = sc->hw_rate_table[sc->sc_curmode]; static u32 nretry_to_per_lookup[10] = { 100 * 0 / 1, 100 * 1 / 4, @@ -933,24 +911,9 @@ static void ath_rc_update_ht(struct ath_softc *sc, 100 * 9 / 10 }; - if (!ath_rc_priv) - return; - - ASSERT(tx_rate >= 0); - if (tx_rate < 0) - return; - - /* To compensate for some imbalance between ctrl and ext. channel */ - - if (WLAN_RC_PHY_40(rate_table->info[tx_rate].phy)) - tx_info_priv->tx.ts_rssi = - tx_info_priv->tx.ts_rssi < 3 ? 0 : - tx_info_priv->tx.ts_rssi - 3; - last_per = ath_rc_priv->state[tx_rate].per; if (xretries) { - /* Update the PER. */ if (xretries == 1) { ath_rc_priv->state[tx_rate].per += 30; if (ath_rc_priv->state[tx_rate].per > 100) @@ -960,11 +923,10 @@ static void ath_rc_update_ht(struct ath_softc *sc, count = ARRAY_SIZE(nretry_to_per_lookup); if (retries >= count) retries = count - 1; + /* new_PER = 7/8*old_PER + 1/8*(currentPER) */ ath_rc_priv->state[tx_rate].per = - (u8)(ath_rc_priv->state[tx_rate].per - - (ath_rc_priv->state[tx_rate].per >> 3) + - ((100) >> 3)); + (u8)(last_per - (last_per >> 3) + (100 >> 3)); } /* xretries == 1 or 2 */ @@ -972,12 +934,11 @@ static void ath_rc_update_ht(struct ath_softc *sc, if (ath_rc_priv->probe_rate == tx_rate) ath_rc_priv->probe_rate = 0; - } else { /* xretries == 0 */ - /* Update the PER. */ - /* Make sure it doesn't index out of array's bounds. */ + } else { /* xretries == 0 */ count = ARRAY_SIZE(nretry_to_per_lookup); if (retries >= count) retries = count - 1; + if (tx_info_priv->n_bad_frames) { /* new_PER = 7/8*old_PER + 1/8*(currentPER) * Assuming that n_frames is not 0. The current PER @@ -991,22 +952,21 @@ static void ath_rc_update_ht(struct ath_softc *sc, * the above PER. The expression below is a * simplified version of the sum of these two terms. */ - if (tx_info_priv->n_frames > 0) - ath_rc_priv->state[tx_rate].per - = (u8) - (ath_rc_priv->state[tx_rate].per - - (ath_rc_priv->state[tx_rate].per >> 3) + - ((100*(retries*tx_info_priv->n_frames + - tx_info_priv->n_bad_frames) / - (tx_info_priv->n_frames * - (retries+1))) >> 3)); + if (tx_info_priv->n_frames > 0) { + int n_frames, n_bad_frames; + u8 cur_per, new_per; + + n_bad_frames = retries * tx_info_priv->n_frames + + tx_info_priv->n_bad_frames; + n_frames = tx_info_priv->n_frames * (retries + 1); + cur_per = (100 * n_bad_frames / n_frames) >> 3; + new_per = (u8)(last_per - (last_per >> 3) + cur_per); + ath_rc_priv->state[tx_rate].per = new_per; + } } else { - /* new_PER = 7/8*old_PER + 1/8*(currentPER) */ - - ath_rc_priv->state[tx_rate].per = (u8) - (ath_rc_priv->state[tx_rate].per - - (ath_rc_priv->state[tx_rate].per >> 3) + - (nretry_to_per_lookup[retries] >> 3)); + ath_rc_priv->state[tx_rate].per = + (u8)(last_per - (last_per >> 3) + + (nretry_to_per_lookup[retries] >> 3)); } ath_rc_priv->rssi_last_prev2 = ath_rc_priv->rssi_last_prev; @@ -1018,7 +978,6 @@ static void ath_rc_update_ht(struct ath_softc *sc, * If we got at most one retry then increase the max rate if * this was a probe. Otherwise, ignore the probe. */ - if (ath_rc_priv->probe_rate && ath_rc_priv->probe_rate == tx_rate) { if (retries > 0 || 2 * tx_info_priv->n_bad_frames > tx_info_priv->n_frames) { @@ -1033,7 +992,8 @@ static void ath_rc_update_ht(struct ath_softc *sc, } else { u8 probe_rate = 0; - ath_rc_priv->rate_max_phy = ath_rc_priv->probe_rate; + ath_rc_priv->rate_max_phy = + ath_rc_priv->probe_rate; probe_rate = ath_rc_priv->probe_rate; if (ath_rc_priv->state[probe_rate].per > 30) @@ -1047,8 +1007,8 @@ static void ath_rc_update_ht(struct ath_softc *sc, * to move up faster if the probes are * succesful. */ - ath_rc_priv->probe_time = now_msec - - rate_table->probe_interval / 2; + ath_rc_priv->probe_time = + now_msec - rate_table->probe_interval / 2; } } @@ -1064,6 +1024,10 @@ static void ath_rc_update_ht(struct ath_softc *sc, */ ath_rc_priv->hw_maxretry_pktcnt = 0; } else { + int32_t rssi_ackAvg; + int8_t rssi_thres; + int8_t rssi_ack_vmin; + /* * It worked with no retries. First ignore bogus (small) * rssi_ack values. @@ -1073,46 +1037,82 @@ static void ath_rc_update_ht(struct ath_softc *sc, ath_rc_priv->hw_maxretry_pktcnt++; } - if (tx_info_priv->tx.ts_rssi >= - rate_table->info[tx_rate].rssi_ack_validmin) { - /* Average the rssi */ - if (tx_rate != ath_rc_priv->rssi_sum_rate) { - ath_rc_priv->rssi_sum_rate = tx_rate; - ath_rc_priv->rssi_sum = - ath_rc_priv->rssi_sum_cnt = 0; - } + if (tx_info_priv->tx.ts_rssi < + rate_table->info[tx_rate].rssi_ack_validmin) + goto exit; - ath_rc_priv->rssi_sum += tx_info_priv->tx.ts_rssi; - ath_rc_priv->rssi_sum_cnt++; - - if (ath_rc_priv->rssi_sum_cnt > 4) { - int32_t rssi_ackAvg = - (ath_rc_priv->rssi_sum + 2) / 4; - int8_t rssi_thres = - ath_rc_priv->state[tx_rate]. - rssi_thres; - int8_t rssi_ack_vmin = - rate_table->info[tx_rate]. - rssi_ack_validmin; - - ath_rc_priv->rssi_sum = - ath_rc_priv->rssi_sum_cnt = 0; - - /* Now reduce the current - * rssi threshold. */ - if ((rssi_ackAvg < rssi_thres + 2) && - (rssi_thres > rssi_ack_vmin)) { - ath_rc_priv->state[tx_rate]. - rssi_thres--; - } - - state_change = 1; - } + /* Average the rssi */ + if (tx_rate != ath_rc_priv->rssi_sum_rate) { + ath_rc_priv->rssi_sum_rate = tx_rate; + ath_rc_priv->rssi_sum = + ath_rc_priv->rssi_sum_cnt = 0; + } + + ath_rc_priv->rssi_sum += tx_info_priv->tx.ts_rssi; + ath_rc_priv->rssi_sum_cnt++; + + if (ath_rc_priv->rssi_sum_cnt < 4) + goto exit; + + rssi_ackAvg = + (ath_rc_priv->rssi_sum + 2) / 4; + rssi_thres = + ath_rc_priv->state[tx_rate].rssi_thres; + rssi_ack_vmin = + rate_table->info[tx_rate].rssi_ack_validmin; + + ath_rc_priv->rssi_sum = + ath_rc_priv->rssi_sum_cnt = 0; + + /* Now reduce the current rssi threshold */ + if ((rssi_ackAvg < rssi_thres + 2) && + (rssi_thres > rssi_ack_vmin)) { + ath_rc_priv->state[tx_rate].rssi_thres--; } + + state_change = true; } } +exit: + return state_change; +} + +/* Update PER, RSSI and whatever else that the code thinks it is doing. + If you can make sense of all this, you really need to go out more. */ - /* For all cases */ +static void ath_rc_update_ht(struct ath_softc *sc, + struct ath_rate_priv *ath_rc_priv, + struct ath_tx_info_priv *tx_info_priv, + int tx_rate, int xretries, int retries) +{ +#define CHK_RSSI(rate) \ + ((ath_rc_priv->state[(rate)].rssi_thres + \ + rate_table->info[(rate)].rssi_ack_deltamin) > \ + ath_rc_priv->state[(rate)+1].rssi_thres) + + u32 now_msec = jiffies_to_msecs(jiffies); + int rate; + u8 last_per; + bool state_change = false; + struct ath_rate_table *rate_table = sc->hw_rate_table[sc->sc_curmode]; + int size = ath_rc_priv->rate_table_size; + + if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt)) + return; + + /* To compensate for some imbalance between ctrl and ext. channel */ + + if (WLAN_RC_PHY_40(rate_table->info[tx_rate].phy)) + tx_info_priv->tx.ts_rssi = + tx_info_priv->tx.ts_rssi < 3 ? 0 : + tx_info_priv->tx.ts_rssi - 3; + + last_per = ath_rc_priv->state[tx_rate].per; + + /* Update PER first */ + state_change = ath_rc_update_per(sc, rate_table, ath_rc_priv, + tx_info_priv, tx_rate, xretries, + retries, now_msec); /* * If this rate looks bad (high PER) then stop using it for @@ -1122,7 +1122,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, rate_table->info[tx_rate].ratekbps <= rate_table->info[ath_rc_priv->rate_max_phy].ratekbps) { ath_rc_get_nextlowervalid_txrate(rate_table, ath_rc_priv, - (u8) tx_rate, &ath_rc_priv->rate_max_phy); + (u8)tx_rate, &ath_rc_priv->rate_max_phy); /* Don't probe for a little while. */ ath_rc_priv->probe_time = now_msec; @@ -1136,20 +1136,15 @@ static void ath_rc_update_ht(struct ath_softc *sc, * made to keep the rssi thresholds monotonically * increasing between the CCK and OFDM rates.) */ - for (rate = tx_rate; rate < - ath_rc_priv->rate_table_size - 1; rate++) { + for (rate = tx_rate; rate < size - 1; rate++) { if (rate_table->info[rate+1].phy != - rate_table->info[tx_rate].phy) + rate_table->info[tx_rate].phy) break; - if (ath_rc_priv->state[rate].rssi_thres + - rate_table->info[rate].rssi_ack_deltamin > - ath_rc_priv->state[rate+1].rssi_thres) { + if (CHK_RSSI(rate)) { ath_rc_priv->state[rate+1].rssi_thres = - ath_rc_priv->state[rate]. - rssi_thres + - rate_table->info[rate]. - rssi_ack_deltamin; + ath_rc_priv->state[rate].rssi_thres + + rate_table->info[rate].rssi_ack_deltamin; } } @@ -1159,27 +1154,20 @@ static void ath_rc_update_ht(struct ath_softc *sc, rate_table->info[tx_rate].phy) break; - if (ath_rc_priv->state[rate].rssi_thres + - rate_table->info[rate].rssi_ack_deltamin > - ath_rc_priv->state[rate+1].rssi_thres) { + if (CHK_RSSI(rate)) { if (ath_rc_priv->state[rate+1].rssi_thres < - rate_table->info[rate]. - rssi_ack_deltamin) + rate_table->info[rate].rssi_ack_deltamin) ath_rc_priv->state[rate].rssi_thres = 0; else { ath_rc_priv->state[rate].rssi_thres = - ath_rc_priv->state[rate+1]. - rssi_thres - - rate_table->info[rate]. - rssi_ack_deltamin; + ath_rc_priv->state[rate+1].rssi_thres - + rate_table->info[rate].rssi_ack_deltamin; } if (ath_rc_priv->state[rate].rssi_thres < - rate_table->info[rate]. - rssi_ack_validmin) { + rate_table->info[rate].rssi_ack_validmin) { ath_rc_priv->state[rate].rssi_thres = - rate_table->info[rate]. - rssi_ack_validmin; + rate_table->info[rate].rssi_ack_validmin; } } } @@ -1202,8 +1190,9 @@ static void ath_rc_update_ht(struct ath_softc *sc, } /* Maintain monotonicity for rates above the current rate */ - for (rate = tx_rate; rate < ath_rc_priv->rate_table_size - 1; rate++) { - if (ath_rc_priv->state[rate+1].per < ath_rc_priv->state[rate].per) + for (rate = tx_rate; rate < size - 1; rate++) { + if (ath_rc_priv->state[rate+1].per < + ath_rc_priv->state[rate].per) ath_rc_priv->state[rate+1].per = ath_rc_priv->state[rate].per; } @@ -1213,7 +1202,7 @@ static void ath_rc_update_ht(struct ath_softc *sc, if (now_msec - ath_rc_priv->rssi_down_time >= rate_table->rssi_reduce_interval) { - for (rate = 0; rate < ath_rc_priv->rate_table_size; rate++) { + for (rate = 0; rate < size; rate++) { if (ath_rc_priv->state[rate].rssi_thres > rate_table->info[rate].rssi_ack_validmin) ath_rc_priv->state[rate].rssi_thres -= 1; @@ -1225,13 +1214,33 @@ static void ath_rc_update_ht(struct ath_softc *sc, * and PER (different for CCK and OFDM). */ if (now_msec - ath_rc_priv->per_down_time >= rate_table->rssi_reduce_interval) { - for (rate = 0; rate < ath_rc_priv->rate_table_size; rate++) { + for (rate = 0; rate < size; rate++) { ath_rc_priv->state[rate].per = 7 * ath_rc_priv->state[rate].per / 8; } ath_rc_priv->per_down_time = now_msec; } + +#undef CHK_RSSI +} + +static int ath_rc_get_rateindex(struct ath_rate_table *rate_table, + struct ieee80211_tx_rate *rate) +{ + int rix; + + if ((rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && + (rate->flags & IEEE80211_TX_RC_SHORT_GI)) + rix = rate_table->info[rate->idx].ht_index; + else if (rate->flags & IEEE80211_TX_RC_SHORT_GI) + rix = rate_table->info[rate->idx].sgi_index; + else if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + rix = rate_table->info[rate->idx].cw40index; + else + rix = rate_table->info[rate->idx].base_index; + + return rix; } static void ath_rc_tx_status(struct ath_softc *sc, @@ -1243,7 +1252,7 @@ static void ath_rc_tx_status(struct ath_softc *sc, struct ath_rate_table *rate_table; struct ieee80211_tx_rate *rates = tx_info->status.rates; u8 flags; - u32 series = 0, rix; + u32 i = 0, rix; rate_table = sc->hw_rate_table[sc->sc_curmode]; @@ -1253,32 +1262,22 @@ static void ath_rc_tx_status(struct ath_softc *sc, */ if (final_ts_idx != 0) { /* Process intermediate rates that failed.*/ - for (series = 0; series < final_ts_idx ; series++) { - if (rates[series].count != 0 && (rates[series].idx >= 0)) { - flags = rates[series].flags; + for (i = 0; i < final_ts_idx ; i++) { + if (rates[i].count != 0 && (rates[i].idx >= 0)) { + flags = rates[i].flags; + /* If HT40 and we have switched mode from * 40 to 20 => don't update */ + if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && (ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG)) return; - if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && - (flags & IEEE80211_TX_RC_SHORT_GI)) - rix = rate_table->info[ - rates[series].idx].ht_index; - else if (flags & IEEE80211_TX_RC_SHORT_GI) - rix = rate_table->info[ - rates[series].idx].sgi_index; - else if (flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - rix = rate_table->info[ - rates[series].idx].cw40index; - else - rix = rate_table->info[ - rates[series].idx].base_index; + rix = ath_rc_get_rateindex(rate_table, &rates[i]); ath_rc_update_ht(sc, ath_rc_priv, tx_info_priv, rix, xretries ? 1 : 2, - rates[series].count); + rates[i].count); } } } else { @@ -1292,24 +1291,17 @@ static void ath_rc_tx_status(struct ath_softc *sc, xretries = 2; } - flags = rates[series].flags; + flags = rates[i].flags; + /* If HT40 and we have switched mode from 40 to 20 => don't update */ if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && (ath_rc_priv->rc_phy_mode != WLAN_RC_40_FLAG)) { return; } - if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) && (flags & IEEE80211_TX_RC_SHORT_GI)) - rix = rate_table->info[rates[series].idx].ht_index; - else if (flags & IEEE80211_TX_RC_SHORT_GI) - rix = rate_table->info[rates[series].idx].sgi_index; - else if (flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - rix = rate_table->info[rates[series].idx].cw40index; - else - rix = rate_table->info[rates[series].idx].base_index; - + rix = ath_rc_get_rateindex(rate_table, &rates[i]); ath_rc_update_ht(sc, ath_rc_priv, tx_info_priv, rix, - xretries, long_retry); + xretries, long_retry); } static void ath_rc_init(struct ath_softc *sc, @@ -1362,14 +1354,14 @@ static void ath_rc_init(struct ath_softc *sc, if (!rateset->rs_nrates) { /* No working rate, just initialize valid rates */ - hi = ath_rc_sib_init_validrates(ath_rc_priv, rate_table, + hi = ath_rc_init_validrates(ath_rc_priv, rate_table, ath_rc_priv->ht_cap); } else { /* Use intersection of working rates and valid rates */ - hi = ath_rc_sib_setvalid_rates(ath_rc_priv, rate_table, + hi = ath_rc_setvalid_rates(ath_rc_priv, rate_table, rateset, ath_rc_priv->ht_cap); if (ath_rc_priv->ht_cap & WLAN_RC_HT_FLAG) { - hthi = ath_rc_sib_setvalid_htrates(ath_rc_priv, + hthi = ath_rc_setvalid_htrates(ath_rc_priv, rate_table, ht_mcs, ath_rc_priv->ht_cap); diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index dff4b7ade3df..297dff96c3a1 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -27,6 +27,11 @@ struct ath_softc; #define RATE_TABLE_SIZE 64 #define MAX_TX_RATE_PHY 48 +/* VALID_ALL - valid for 20/40/Legacy, + * VALID - Legacy only, + * VALID_20 - HT 20 only, + * VALID_40 - HT 40 only */ + #define INVALID 0x0 #define VALID 0x1 #define VALID_20 0x2 -- cgit v1.2.2 From c428839008f6638317a0db102d4e65d631c288a6 Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:09:30 +0530 Subject: ath9k: Move TX completion routine to xmit.c Also, use a helper function to setup RC status data when processing completed TX descriptors. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.h | 2 - drivers/net/wireless/ath9k/main.c | 31 -------------- drivers/net/wireless/ath9k/xmit.c | 88 +++++++++++++++++++++++++-------------- 3 files changed, 56 insertions(+), 65 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 0c348209f39c..e6725567109d 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -453,8 +453,6 @@ void ath_tx_tasklet(struct ath_softc *sc); u32 ath_txq_depth(struct ath_softc *sc, int qnum); u32 ath_txq_aggr_depth(struct ath_softc *sc, int qnum); void ath_notify_txq_status(struct ath_softc *sc, u16 queue_depth); -void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, - struct ath_xmit_status *tx_status); void ath_tx_cabq(struct ath_softc *sc, struct sk_buff *skb); /**********************/ diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 9a798245b1bc..54d89abce478 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -341,37 +341,6 @@ void ath_get_beaconconfig(struct ath_softc *sc, conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; } -void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, - struct ath_xmit_status *tx_status) -{ - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info); - - DPRINTF(sc, ATH_DBG_XMIT, - "%s: TX complete: skb: %p\n", __func__, skb); - - if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || - tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { - kfree(tx_info_priv); - tx_info->rate_driver_data[0] = NULL; - } - - if (tx_status->flags & ATH_TX_BAR) { - tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - tx_status->flags &= ~ATH_TX_BAR; - } - - if (!(tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) { - /* Frame was ACKed */ - tx_info->flags |= IEEE80211_TX_STAT_ACK; - } - - tx_info->status.rates[0].count = tx_status->retries + 1; - - ieee80211_tx_status(hw, skb); -} - /********************************/ /* LED functions */ /********************************/ diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 93317ce9ac8a..4c9a03ed8382 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -102,6 +102,37 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq, ath9k_hw_txstart(ah, txq->axq_qnum); } +static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, + struct ath_xmit_status *tx_status) +{ + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); + struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info); + + DPRINTF(sc, ATH_DBG_XMIT, + "%s: TX complete: skb: %p\n", __func__, skb); + + if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || + tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { + kfree(tx_info_priv); + tx_info->rate_driver_data[0] = NULL; + } + + if (tx_status->flags & ATH_TX_BAR) { + tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; + tx_status->flags &= ~ATH_TX_BAR; + } + + if (!(tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) { + /* Frame was ACKed */ + tx_info->flags |= IEEE80211_TX_STAT_ACK; + } + + tx_info->status.rates[0].count = tx_status->retries + 1; + + ieee80211_tx_status(hw, skb); +} + /* Check if it's okay to send out aggregates */ static int ath_aggr_query(struct ath_softc *sc, struct ath_node *an, u8 tidno) @@ -913,18 +944,35 @@ static void ath_tx_complete_aggr_rifs(struct ath_softc *sc, return; } +static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds, int nbad) +{ + struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); + struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info); + + if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) + tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; + + if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 && + (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { + if (bf_isdata(bf)) { + memcpy(&tx_info_priv->tx, &ds->ds_txstat, + sizeof(tx_info_priv->tx)); + tx_info_priv->n_frames = bf->bf_nframes; + tx_info_priv->n_bad_frames = nbad; + } + } +} + /* Process completed xmit descriptors from the specified queue */ -static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) +static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) { struct ath_hal *ah = sc->sc_ah; struct ath_buf *bf, *lastbf, *bf_held = NULL; struct list_head bf_head; - struct ath_desc *ds, *tmp_ds; - struct sk_buff *skb; - struct ieee80211_tx_info *tx_info; - struct ath_tx_info_priv *tx_info_priv; - int nacked, txok, nbad = 0, isrifs = 0; + struct ath_desc *ds; + int txok, nbad = 0; int status; DPRINTF(sc, ATH_DBG_QUEUE, @@ -932,7 +980,6 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) txq->axq_qnum, ath9k_hw_gettxbuf(sc->sc_ah, txq->axq_qnum), txq->axq_link); - nacked = 0; for (;;) { spin_lock_bh(&txq->axq_lock); if (list_empty(&txq->axq_q)) { @@ -1022,30 +1069,8 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) } else { nbad = ath_tx_num_badfrms(sc, bf, txok); } - skb = bf->bf_mpdu; - tx_info = IEEE80211_SKB_CB(skb); - - tx_info_priv = - (struct ath_tx_info_priv *)tx_info->rate_driver_data[0]; - if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) - tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; - if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 && - (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { - if (ds->ds_txstat.ts_status == 0) - nacked++; - - if (bf_isdata(bf)) { - if (isrifs) - tmp_ds = bf->bf_rifslast->bf_desc; - else - tmp_ds = ds; - memcpy(&tx_info_priv->tx, - &tmp_ds->ds_txstat, - sizeof(tx_info_priv->tx)); - tx_info_priv->n_frames = bf->bf_nframes; - tx_info_priv->n_bad_frames = nbad; - } - } + + ath_tx_rc_status(bf, ds, nbad); /* * Complete this transmit unit @@ -1076,7 +1101,6 @@ static int ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) ath_txq_schedule(sc, txq); spin_unlock_bh(&txq->axq_lock); } - return nacked; } static void ath_tx_stopdma(struct ath_softc *sc, struct ath_txq *txq) -- cgit v1.2.2 From 788a3d6f3df595a6537ef537433c870d090afe02 Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:09:54 +0530 Subject: ath9k: Fix bug in deciphering channel flags CHANNEL_CCK flag is set for all 2 Ghz channels, so IS_CHAN_CCK() would turn out to be true for all channles in that band. Use IS_CHAN_B() now, which checks the channel mode and not the channel flags. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/ath9k.h | 3 +-- drivers/net/wireless/ath9k/hw.c | 11 ++++++----- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h index 6b0e3dd7b2ad..5b9bc545e964 100644 --- a/drivers/net/wireless/ath9k/ath9k.h +++ b/drivers/net/wireless/ath9k/ath9k.h @@ -476,12 +476,10 @@ struct ath9k_channel { (((_c)->channelFlags & CHANNEL_A_HT20) == CHANNEL_A_HT20) || \ (((_c)->channelFlags & CHANNEL_A_HT40PLUS) == CHANNEL_A_HT40PLUS) || \ (((_c)->channelFlags & CHANNEL_A_HT40MINUS) == CHANNEL_A_HT40MINUS)) -#define IS_CHAN_B(_c) (((_c)->channelFlags & CHANNEL_B) == CHANNEL_B) #define IS_CHAN_G(_c) ((((_c)->channelFlags & (CHANNEL_G)) == CHANNEL_G) || \ (((_c)->channelFlags & CHANNEL_G_HT20) == CHANNEL_G_HT20) || \ (((_c)->channelFlags & CHANNEL_G_HT40PLUS) == CHANNEL_G_HT40PLUS) || \ (((_c)->channelFlags & CHANNEL_G_HT40MINUS) == CHANNEL_G_HT40MINUS)) -#define IS_CHAN_CCK(_c) (((_c)->channelFlags & CHANNEL_CCK) != 0) #define IS_CHAN_OFDM(_c) (((_c)->channelFlags & CHANNEL_OFDM) != 0) #define IS_CHAN_5GHZ(_c) (((_c)->channelFlags & CHANNEL_5GHZ) != 0) #define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0) @@ -490,6 +488,7 @@ struct ath9k_channel { #define IS_CHAN_QUARTER_RATE(_c) (((_c)->channelFlags & CHANNEL_QUARTER) != 0) /* These macros check chanmode and not channelFlags */ +#define IS_CHAN_B(_c) ((_c)->chanmode == CHANNEL_B) #define IS_CHAN_HT20(_c) (((_c)->chanmode == CHANNEL_A_HT20) || \ ((_c)->chanmode == CHANNEL_G_HT20)) #define IS_CHAN_HT40(_c) (((_c)->chanmode == CHANNEL_A_HT40PLUS) || \ diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c index eb1445143bcf..10f6c08f6eb2 100644 --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c @@ -86,10 +86,11 @@ static u32 ath9k_hw_mac_to_clks(struct ath_hal *ah, u32 usecs) enum wireless_mode ath9k_hw_chan2wmode(struct ath_hal *ah, const struct ath9k_channel *chan) { - if (IS_CHAN_CCK(chan)) - return ATH9K_MODE_11A; + if (IS_CHAN_B(chan)) + return ATH9K_MODE_11B; if (IS_CHAN_G(chan)) return ATH9K_MODE_11G; + return ATH9K_MODE_11A; } @@ -909,7 +910,7 @@ static void ath9k_hw_init_bb(struct ath_hal *ah, u32 synthDelay; synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; - if (IS_CHAN_CCK(chan)) + if (IS_CHAN_B(chan)) synthDelay = (4 * synthDelay) / 22; else synthDelay /= 10; @@ -1647,7 +1648,7 @@ static struct ath9k_channel *ath9k_hw_check_chan(struct ath_hal *ah, } if (!IS_CHAN_OFDM(chan) && - !IS_CHAN_CCK(chan) && + !IS_CHAN_B(chan) && !IS_CHAN_HT20(chan) && !IS_CHAN_HT40(chan)) { DPRINTF(ah->ah_sc, ATH_DBG_CHANNEL, @@ -1711,7 +1712,7 @@ static bool ath9k_hw_channel_change(struct ath_hal *ah, } synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY; - if (IS_CHAN_CCK(chan)) + if (IS_CHAN_B(chan)) synthDelay = (4 * synthDelay) / 22; else synthDelay /= 10; -- cgit v1.2.2 From daa9deb359252496796fa2b7420012e252b327b6 Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:10:22 +0530 Subject: ath9k: Update TX trigger level on a FIFO underrun. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/mac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath9k/mac.c b/drivers/net/wireless/ath9k/mac.c index c344a81e738a..36955e0b1849 100644 --- a/drivers/net/wireless/ath9k/mac.c +++ b/drivers/net/wireless/ath9k/mac.c @@ -293,8 +293,10 @@ int ath9k_hw_txprocdesc(struct ath_hal *ah, struct ath_desc *ds) ds->ds_txstat.ts_status |= ATH9K_TXERR_XRETRY; if (ads->ds_txstatus1 & AR_Filtered) ds->ds_txstat.ts_status |= ATH9K_TXERR_FILT; - if (ads->ds_txstatus1 & AR_FIFOUnderrun) + if (ads->ds_txstatus1 & AR_FIFOUnderrun) { ds->ds_txstat.ts_status |= ATH9K_TXERR_FIFO; + ath9k_hw_updatetxtriglevel(ah, true); + } if (ads->ds_txstatus9 & AR_TxOpExceeded) ds->ds_txstat.ts_status |= ATH9K_TXERR_XTXOP; if (ads->ds_txstatus1 & AR_TxTimerExpired) -- cgit v1.2.2 From 8f93b8b337763a58fcdf23333ffe752db6c93bae Mon Sep 17 00:00:00 2001 From: Sujith Date: Tue, 18 Nov 2008 09:10:42 +0530 Subject: ath9k: Use straightforward PCI routines to setup the TX buffer. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/xmit.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 4c9a03ed8382..50d4105ee4b3 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -1646,7 +1646,7 @@ static void ath_txq_drain_pending_buffers(struct ath_softc *sc, } static void ath_tx_setup_buffer(struct ath_softc *sc, struct ath_buf *bf, - struct sk_buff *skb, struct scatterlist *sg, + struct sk_buff *skb, struct ath_tx_control *txctl) { struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); @@ -1711,7 +1711,6 @@ static void ath_tx_setup_buffer(struct ath_softc *sc, struct ath_buf *bf, /* FIXME: tx power */ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf, - struct scatterlist *sg, u32 n_sg, struct ath_tx_control *txctl) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; @@ -1740,10 +1739,10 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf, bf->bf_keyix, bf->bf_keytype, bf->bf_flags); ath9k_hw_filltxdesc(ah, ds, - sg_dma_len(sg), /* segment length */ - true, /* first segment */ - (n_sg == 1) ? true : false, /* last segment */ - ds); /* first descriptor */ + skb->len, /* segment length */ + true, /* first segment */ + true, /* last segment */ + ds); /* first descriptor */ bf->bf_lastfrm = bf; @@ -1783,7 +1782,6 @@ int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb, struct ath_tx_control *txctl) { struct ath_buf *bf; - struct scatterlist sg; /* Check if a tx buffer is available */ @@ -1794,15 +1792,8 @@ int ath_tx_start(struct ath_softc *sc, struct sk_buff *skb, return -1; } - ath_tx_setup_buffer(sc, bf, skb, &sg, txctl); - - /* Setup S/G */ - - memset(&sg, 0, sizeof(struct scatterlist)); - sg_dma_address(&sg) = bf->bf_dmacontext; - sg_dma_len(&sg) = skb->len; - - ath_tx_start_dma(sc, bf, &sg, 1, txctl); + ath_tx_setup_buffer(sc, bf, skb, txctl); + ath_tx_start_dma(sc, bf, txctl); return 0; } -- cgit v1.2.2 From 0e149cf5a1b1900484f4b808d59a5f246cd720be Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 17 Nov 2008 23:40:38 -0500 Subject: ath5k: set mac address in add_interface Configure the mac address in add_interface and clear it in remove_interface so that users can change the mac address to something other than the one in the eeprom. Also avoid setting it at attach time so that we won't ack packets until fully set up. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/attach.c | 12 +++--------- drivers/net/wireless/ath5k/base.c | 13 +++++++++++-- 2 files changed, 14 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c index 51d569883cdd..49d82d79d3fc 100644 --- a/drivers/net/wireless/ath5k/attach.c +++ b/drivers/net/wireless/ath5k/attach.c @@ -106,7 +106,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) { struct ath5k_hw *ah; struct pci_dev *pdev = sc->pdev; - u8 mac[ETH_ALEN]; + u8 mac[ETH_ALEN] = {}; int ret; u32 srev; @@ -317,15 +317,9 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) goto err_free; } - /* Set MAC address */ - ret = ath5k_eeprom_read_mac(ah, mac); - if (ret) { - ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", - sc->pdev->device); - goto err_free; - } - + /* MAC address is cleared until add_interface */ ath5k_hw_set_lladdr(ah, mac); + /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ memset(ah->ah_bssid, 0xff, ETH_ALEN); ath5k_hw_set_associd(ah, ah->ah_bssid, 0); diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 7fdb59c813ca..4bcea5a9d70b 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -707,7 +707,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) { struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; - u8 mac[ETH_ALEN]; + u8 mac[ETH_ALEN] = {}; int ret; ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); @@ -777,7 +777,13 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc); setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc); - ath5k_hw_get_lladdr(ah, mac); + ret = ath5k_eeprom_read_mac(ah, mac); + if (ret) { + ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n", + sc->pdev->device); + goto err_queues; + } + SET_IEEE80211_PERM_ADDR(hw, mac); /* All MAC address bits matter for ACKs */ memset(sc->bssidmask, 0xff, ETH_ALEN); @@ -2765,6 +2771,7 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, /* Set to a reasonable value. Note that this will * be set to mac80211's value at ath5k_config(). */ sc->bintval = 1000; + ath5k_hw_set_lladdr(sc->ah, conf->mac_addr); ret = 0; end: @@ -2777,11 +2784,13 @@ ath5k_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct ath5k_softc *sc = hw->priv; + u8 mac[ETH_ALEN] = {}; mutex_lock(&sc->lock); if (sc->vif != conf->vif) goto end; + ath5k_hw_set_lladdr(sc->ah, mac); sc->vif = NULL; end: mutex_unlock(&sc->lock); -- cgit v1.2.2 From ce546fd2eacdbd8dc15f3d2ffd9a95661d082919 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Wed, 19 Nov 2008 15:32:22 -0800 Subject: iwl3945 : Fix ad-hoc mode for 3945 Patch fixes the ad-hoc mode by 1) Removing redundant clear_stations_table which prevented generation of beacons. 2) Setting assoc_id to 1. It was never set so preventing tx flow in iwl3945_tx_skb. Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 9330dfaff132..69fda64c6503 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6321,10 +6321,7 @@ static void iwl3945_post_associate(struct iwl3945_priv *priv) case NL80211_IFTYPE_ADHOC: - /* clear out the station table */ - iwl3945_clear_stations_table(priv); - - iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0); + priv->assoc_id = 1; iwl3945_add_station(priv, priv->bssid, 0, 0); iwl3945_sync_sta(priv, IWL_STA_ID, (priv->band == IEEE80211_BAND_5GHZ) ? -- cgit v1.2.2 From 83dde8c90522b89366e241bdbd69113f7094c249 Mon Sep 17 00:00:00 2001 From: "Winkler, Tomas" Date: Wed, 19 Nov 2008 15:32:23 -0800 Subject: iwlwifi: move iwl_clear_stations_table to iwl-sta.c This patch moves iwl_clear_stations_table into iwl-sta.c Signed-off-by: Tomas Winkler Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 23 +---------------------- drivers/net/wireless/iwlwifi/iwl-core.h | 1 - drivers/net/wireless/iwlwifi/iwl-sta.c | 23 +++++++++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-sta.h | 1 + 4 files changed, 25 insertions(+), 23 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index fccd150ae5ca..6aa332bebc5f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -37,6 +37,7 @@ #include "iwl-io.h" #include "iwl-rfkill.h" #include "iwl-power.h" +#include "iwl-sta.h" MODULE_DESCRIPTION("iwl core"); @@ -237,28 +238,6 @@ int iwl_hw_nic_init(struct iwl_priv *priv) } EXPORT_SYMBOL(iwl_hw_nic_init); -/** - * iwl_clear_stations_table - Clear the driver's station table - * - * NOTE: This does not clear or otherwise alter the device's station table. - */ -void iwl_clear_stations_table(struct iwl_priv *priv) -{ - unsigned long flags; - - spin_lock_irqsave(&priv->sta_lock, flags); - - if (iwl_is_alive(priv) && - !test_bit(STATUS_EXIT_PENDING, &priv->status) && - iwl_send_cmd_pdu_async(priv, REPLY_REMOVE_ALL_STA, 0, NULL, NULL)) - IWL_ERROR("Couldn't clear the station table\n"); - - priv->num_stations = 0; - memset(priv->stations, 0, sizeof(priv->stations)); - - spin_unlock_irqrestore(&priv->sta_lock, flags); -} -EXPORT_SYMBOL(iwl_clear_stations_table); void iwl_reset_qos(struct iwl_priv *priv) { diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 5d4e2e28bdbe..82bf263b6f5a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -182,7 +182,6 @@ struct iwl_cfg { struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg, struct ieee80211_ops *hw_ops); void iwl_hw_detect(struct iwl_priv *priv); -void iwl_clear_stations_table(struct iwl_priv *priv); void iwl_reset_qos(struct iwl_priv *priv); void iwl_set_rxon_chain(struct iwl_priv *priv); int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 109136a09c54..f86a8ca2aa3b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -463,6 +463,29 @@ out: } EXPORT_SYMBOL(iwl_remove_station); +/** + * iwl_clear_stations_table - Clear the driver's station table + * + * NOTE: This does not clear or otherwise alter the device's station table. + */ +void iwl_clear_stations_table(struct iwl_priv *priv) +{ + unsigned long flags; + + spin_lock_irqsave(&priv->sta_lock, flags); + + if (iwl_is_alive(priv) && + !test_bit(STATUS_EXIT_PENDING, &priv->status) && + iwl_send_cmd_pdu_async(priv, REPLY_REMOVE_ALL_STA, 0, NULL, NULL)) + IWL_ERROR("Couldn't clear the station table\n"); + + priv->num_stations = 0; + memset(priv->stations, 0, sizeof(priv->stations)); + + spin_unlock_irqrestore(&priv->sta_lock, flags); +} +EXPORT_SYMBOL(iwl_clear_stations_table); + static int iwl_get_free_ucode_key_index(struct iwl_priv *priv) { int i; diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h index 61eede5b30cb..7b98ea4dfbc0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.h +++ b/drivers/net/wireless/iwlwifi/iwl-sta.h @@ -53,6 +53,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv, int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap); int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, int is_ap); +void iwl_clear_stations_table(struct iwl_priv *priv); int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr); int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr); u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, -- cgit v1.2.2 From 201706ac0b1ab6df5343119883964ec7272844b0 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 19 Nov 2008 15:32:24 -0800 Subject: iwlwifi: enable base band calibration in 5000 HW This patch adds base band calibration support. Signed-off-by: Tomas Winkler Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 8 ++++++-- drivers/net/wireless/iwlwifi/iwl-dev.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index aeb69ee8706f..478c5c3674e4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -475,6 +475,9 @@ static void iwl5000_rx_calib_result(struct iwl_priv *priv, case IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD: index = IWL_CALIB_TX_IQ_PERD; break; + case IWL_PHY_CALIBRATE_BASE_BAND_CMD: + index = IWL_CALIB_BASE_BAND; + break; default: IWL_ERROR("Unknown calibration notification %d\n", hdr->op_code); @@ -841,8 +844,9 @@ static int iwl5000_hw_set_hw_params(struct iwl_priv *priv) priv->hw_params.calib_init_cfg = BIT(IWL_CALIB_XTAL) | BIT(IWL_CALIB_LO) | - BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_TX_IQ_PERD); + BIT(IWL_CALIB_TX_IQ) | + BIT(IWL_CALIB_TX_IQ_PERD) | + BIT(IWL_CALIB_BASE_BAND); break; case CSR_HW_REV_TYPE_5150: priv->hw_params.calib_init_cfg = 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 1b305d8d0cc5..4da988e0eae0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -695,6 +695,7 @@ enum iwl_calib { IWL_CALIB_LO, IWL_CALIB_TX_IQ, IWL_CALIB_TX_IQ_PERD, + IWL_CALIB_BASE_BAND, IWL_CALIB_MAX }; -- cgit v1.2.2 From 25e35a56d5f4795cf52cdd0830a91e3103396cfe Mon Sep 17 00:00:00 2001 From: "Winkler, Tomas" Date: Wed, 19 Nov 2008 15:32:25 -0800 Subject: iwlwifi: 4965 define firmware file name once Apply same idiom as in 5000 introduced by 'iwlwifi: define firmware file name once' Signed-off-by: Tomas Winkler Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 9007ff2348d3..b96f55341384 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -53,6 +53,7 @@ static int iwl4965_hw_get_temperature(const struct iwl_priv *priv); * is not compatible with earlier drivers. * This number will also appear in << 8 position of 1st dword of uCode file */ #define IWL4965_UCODE_API "-2" +#define IWL4965_MODULE_FIRMWARE "iwlwifi-4965" IWL4965_UCODE_API ".ucode" /* module parameters */ @@ -2322,7 +2323,7 @@ static struct iwl_ops iwl4965_ops = { struct iwl_cfg iwl4965_agn_cfg = { .name = "4965AGN", - .fw_name = "iwlwifi-4965" IWL4965_UCODE_API ".ucode", + .fw_name = IWL4965_MODULE_FIRMWARE, .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, .eeprom_size = IWL4965_EEPROM_IMG_SIZE, .eeprom_ver = EEPROM_4965_EEPROM_VERSION, @@ -2332,7 +2333,7 @@ struct iwl_cfg iwl4965_agn_cfg = { }; /* Module firmware */ -MODULE_FIRMWARE("iwlwifi-4965" IWL4965_UCODE_API ".ucode"); +MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE); module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444); MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); -- cgit v1.2.2 From 31a73fe4f3284d94d52774c285e9e98a5f441d21 Mon Sep 17 00:00:00 2001 From: "Winkler, Tomas" Date: Wed, 19 Nov 2008 15:32:26 -0800 Subject: iwlwifi: TX setup fix confusion between TX queue and TX DMA channel This patch configures correctly TX DMA channel. It is not the same as TX queue. Signed-off-by: Tomas Winkler Acked-by: Zhu Yi Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 10 ++++++++-- drivers/net/wireless/iwlwifi/iwl-5000.c | 9 ++++++++- drivers/net/wireless/iwlwifi/iwl-tx.c | 5 ----- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index b96f55341384..60769b12b685 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -692,9 +692,9 @@ static const u16 default_queue_to_tx_fifo[] = { static int iwl4965_alive_notify(struct iwl_priv *priv) { u32 a; - int i = 0; unsigned long flags; int ret; + int i, chan; spin_lock_irqsave(&priv->lock, flags); @@ -718,6 +718,12 @@ static int iwl4965_alive_notify(struct iwl_priv *priv) iwl_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR, priv->scd_bc_tbls.dma >> 10); + /* Enable DMA channel */ + for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++) + iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(chan), + FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); + /* Disable chain mode for all queues */ iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0); @@ -748,7 +754,7 @@ static int iwl4965_alive_notify(struct iwl_priv *priv) (1 << priv->hw_params.max_txq_num) - 1); /* Activate all Tx DMA/FIFO channels */ - priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 7)); + priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 6)); iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0); diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 478c5c3674e4..d73760c3f769 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -700,9 +700,9 @@ static int iwl5000_send_wimax_coex(struct iwl_priv *priv) static int iwl5000_alive_notify(struct iwl_priv *priv) { u32 a; - int i = 0; unsigned long flags; int ret; + int i, chan; spin_lock_irqsave(&priv->lock, flags); @@ -725,6 +725,13 @@ static int iwl5000_alive_notify(struct iwl_priv *priv) iwl_write_prph(priv, IWL50_SCD_DRAM_BASE_ADDR, priv->scd_bc_tbls.dma >> 10); + + /* Enable DMA channel */ + for (chan = 0; chan < FH50_TCSR_CHNL_NUM ; chan++) + iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(chan), + FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); + iwl_write_prph(priv, IWL50_SCD_QUEUECHAIN_SEL, IWL50_SCD_QUEUECHAIN_SEL_ALL(priv->hw_params.max_txq_num)); iwl_write_prph(priv, IWL50_SCD_AGGR_SEL, 0); diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 9f0705bcd03a..e045dfeaa1fe 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -449,11 +449,6 @@ static int iwl_hw_tx_queue_init(struct iwl_priv *priv, iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id), txq->q.dma_addr >> 8); - /* Enable DMA channel, using same id as for TFD queue */ - iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(txq_id), - FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); - iwl_release_nic_access(priv); spin_unlock_irqrestore(&priv->lock, flags); -- cgit v1.2.2 From 40fc95d57caf258e20282f6526b695426d65a73a Mon Sep 17 00:00:00 2001 From: "Winkler, Tomas" Date: Wed, 19 Nov 2008 15:32:27 -0800 Subject: iwlwifi: TX update chicken bits This instructs FH to increment the retry count of a packet when it is brought from the memory to TX-FIFO to save transactions during aggregation flow. Signed-off-by: Tomas Winkler Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 6 ++++++ drivers/net/wireless/iwlwifi/iwl-5000.c | 6 ++++++ drivers/net/wireless/iwlwifi/iwl-fh.h | 5 +++++ 3 files changed, 17 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 60769b12b685..ab0b40531989 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -695,6 +695,7 @@ static int iwl4965_alive_notify(struct iwl_priv *priv) unsigned long flags; int ret; int i, chan; + u32 reg_val; spin_lock_irqsave(&priv->lock, flags); @@ -724,6 +725,11 @@ static int iwl4965_alive_notify(struct iwl_priv *priv) FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); + /* Update FH chicken bits */ + reg_val = iwl_read_direct32(priv, FH_TX_CHICKEN_BITS_REG); + iwl_write_direct32(priv, FH_TX_CHICKEN_BITS_REG, + reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); + /* Disable chain mode for all queues */ iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0); diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index d73760c3f769..a738886b434f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -703,6 +703,7 @@ static int iwl5000_alive_notify(struct iwl_priv *priv) unsigned long flags; int ret; int i, chan; + u32 reg_val; spin_lock_irqsave(&priv->lock, flags); @@ -732,6 +733,11 @@ static int iwl5000_alive_notify(struct iwl_priv *priv) FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); + /* Update FH chicken bits */ + reg_val = iwl_read_direct32(priv, FH_TX_CHICKEN_BITS_REG); + iwl_write_direct32(priv, FH_TX_CHICKEN_BITS_REG, + reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); + iwl_write_prph(priv, IWL50_SCD_QUEUECHAIN_SEL, IWL50_SCD_QUEUECHAIN_SEL_ALL(priv->hw_params.max_txq_num)); iwl_write_prph(priv, IWL50_SCD_AGGR_SEL, 0); diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index bc20acb36aa6..c3dadb03701c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -396,6 +396,11 @@ #define FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ (FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) +#define FH_TX_CHICKEN_BITS_REG (FH_MEM_LOWER_BOUND + 0xE98) +/* Instruct FH to increment the retry count of a packet when + * it is brought from the memory to TX-FIFO + */ +#define FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002) /** * struct iwl_rb_status - reseve buffer status -- cgit v1.2.2 From 7ac47010a444d9f4285cf1ae06780633a112489b Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Thu, 20 Nov 2008 11:51:18 +0530 Subject: ath9k: Dont update rate control for every AMPDU Update the rate control only with the tx status of first AMPDU of an aggregation. This patch fixes frequent drops in throughput. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/rc.c | 3 ++- drivers/net/wireless/ath9k/rc.h | 1 + drivers/net/wireless/ath9k/xmit.c | 2 ++ 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index e118824625ba..7d1913d48d31 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -1413,7 +1413,8 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, an = (struct ath_node *)sta->drv_priv; final_ts_idx = tx_info_priv->tx.ts_rateindex; - if (!an || !priv_sta || !ieee80211_is_data(fc)) + if (!an || !priv_sta || !ieee80211_is_data(fc) || + !tx_info_priv->update_rc) goto exit; if (tx_info_priv->tx.ts_status & ATH9K_TXERR_FILT) diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index 297dff96c3a1..97c60d12e8aa 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -188,6 +188,7 @@ struct ath_tx_info_priv { struct ath_tx_status tx; int n_frames; int n_bad_frames; + bool update_rc; }; #define ATH_TX_INFO_PRIV(tx_info) \ diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 50d4105ee4b3..dad81a9df152 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -950,6 +950,7 @@ static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds, int nbad) struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info); + tx_info_priv->update_rc = false; if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; @@ -960,6 +961,7 @@ static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds, int nbad) sizeof(tx_info_priv->tx)); tx_info_priv->n_frames = bf->bf_nframes; tx_info_priv->n_bad_frames = nbad; + tx_info_priv->update_rc = true; } } } -- cgit v1.2.2 From 1048643ea94d742bd409f343e284af430656fd6c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 20 Nov 2008 15:16:22 +0100 Subject: ath5k: Clean up eeprom parsing and add missing calibration data This patch brings the ath5k eeprom parsing code in sync with the work done on ath_info by Nick Kossifidis and integrates the missing parts based on the code of the Atheros Legacy HAL release. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/ath5k.h | 7 - drivers/net/wireless/ath5k/eeprom.c | 1194 ++++++++++++++++++++++++++++++----- drivers/net/wireless/ath5k/eeprom.h | 253 ++++++-- drivers/net/wireless/ath5k/reset.c | 2 +- 4 files changed, 1264 insertions(+), 192 deletions(-) diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h index a725bb94a52d..5ee2dd1814c2 100644 --- a/drivers/net/wireless/ath5k/ath5k.h +++ b/drivers/net/wireless/ath5k/ath5k.h @@ -821,13 +821,6 @@ struct ath5k_athchan_2ghz { return (false); \ } while (0) -enum ath5k_ant_setting { - AR5K_ANT_VARIABLE = 0, /* variable by programming */ - AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ - AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */ - AR5K_ANT_MAX = 3, -}; - /* * Hardware interrupt abstraction */ diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath5k/eeprom.c index a883839b6a9f..1cb7edfae625 100644 --- a/drivers/net/wireless/ath5k/eeprom.c +++ b/drivers/net/wireless/ath5k/eeprom.c @@ -1,6 +1,7 @@ /* * Copyright (c) 2004-2008 Reyk Floeter * Copyright (c) 2006-2008 Nick Kossifidis + * Copyright (c) 2008 Felix Fietkau * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -63,8 +64,8 @@ static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) /* * Translate binary channel representation in EEPROM to frequency */ -static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, - unsigned int mode) +static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin, + unsigned int mode) { u16 val; @@ -72,13 +73,13 @@ static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, return bin; if (mode == AR5K_EEPROM_MODE_11A) { - if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) + if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) val = (5 * bin) + 4800; else val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : (bin * 10) + 5100; } else { - if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2) + if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) val = bin + 2300; else val = bin + 2400; @@ -87,6 +88,71 @@ static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, return val; } +/* + * Initialize eeprom & capabilities structs + */ +static int +ath5k_eeprom_init_header(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + int ret; + u16 val; + + /* Initial TX thermal adjustment values */ + ee->ee_tx_clip = 4; + ee->ee_pwd_84 = ee->ee_pwd_90 = 1; + ee->ee_gain_select = 1; + + /* + * Read values from EEPROM and store them in the capability structure + */ + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); + + /* Return if we have an old EEPROM */ + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) + return 0; + +#ifdef notyet + /* + * Validate the checksum of the EEPROM date. There are some + * devices with invalid EEPROMs. + */ + for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { + AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); + cksum ^= val; + } + if (cksum != AR5K_EEPROM_INFO_CKSUM) { + ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); + return -EIO; + } +#endif + + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), + ee_ant_gain); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; + + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; + } + + return 0; +} + + /* * Read antenna infos from eeprom */ @@ -100,7 +166,7 @@ static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, AR5K_EEPROM_READ(o++, val); ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; - ee->ee_ant_tx_rx[mode] = (val >> 2) & 0x3f; + ee->ee_atn_tx_rx[mode] = (val >> 2) & 0x3f; ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; AR5K_EEPROM_READ(o++, val); @@ -157,6 +223,30 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, u16 val; int ret; + ee->ee_n_piers[mode] = 0; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + switch(mode) { + case AR5K_EEPROM_MODE_11A: + ee->ee_ob[mode][3] = (val >> 5) & 0x7; + ee->ee_db[mode][3] = (val >> 2) & 0x7; + ee->ee_ob[mode][2] = (val << 1) & 0x7; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ob[mode][2] |= (val >> 15) & 0x1; + ee->ee_db[mode][2] = (val >> 12) & 0x7; + ee->ee_ob[mode][1] = (val >> 9) & 0x7; + ee->ee_db[mode][1] = (val >> 6) & 0x7; + ee->ee_ob[mode][0] = (val >> 3) & 0x7; + ee->ee_db[mode][0] = val & 0x7; + break; + case AR5K_EEPROM_MODE_11G: + case AR5K_EEPROM_MODE_11B: + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + break; + } + AR5K_EEPROM_READ(o++, val); ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; ee->ee_thr_62[mode] = val & 0xff; @@ -209,8 +299,11 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, AR5K_EEPROM_READ(o++, val); ee->ee_i_gain[mode] |= (val << 3) & 0x38; - if (mode == AR5K_EEPROM_MODE_11G) + if (mode == AR5K_EEPROM_MODE_11G) { ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6) + ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; + } } if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && @@ -219,10 +312,77 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, ee->ee_q_cal[mode] = (val >> 3) & 0x1f; } - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 && - mode == AR5K_EEPROM_MODE_11G) - ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_0) + goto done; + + switch(mode) { + case AR5K_EEPROM_MODE_11A: + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_1) + break; + + AR5K_EEPROM_READ(o++, val); + ee->ee_margin_tx_rx[mode] = val & 0x3f; + break; + case AR5K_EEPROM_MODE_11B: + AR5K_EEPROM_READ(o++, val); + + ee->ee_pwr_cal_b[0].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_b[0].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + ee->ee_pwr_cal_b[1].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + if (ee->ee_pwr_cal_b[1].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pwr_cal_b[2].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_b[2].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + break; + case AR5K_EEPROM_MODE_11G: + AR5K_EEPROM_READ(o++, val); + + ee->ee_pwr_cal_g[0].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_g[0].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + ee->ee_pwr_cal_g[1].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + if (ee->ee_pwr_cal_g[1].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + AR5K_EEPROM_READ(o++, val); + ee->ee_turbo_max_power[mode] = val & 0x7f; + ee->ee_xr_power[mode] = (val >> 7) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pwr_cal_g[2].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_g[2].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { + AR5K_EEPROM_READ(o++, val); + ee->ee_cck_ofdm_gain_delta = val & 0xff; + } + break; + } + +done: /* return new offset */ *offset = o; @@ -230,204 +390,944 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, } /* - * Initialize eeprom & capabilities structs + * Read turbo mode information on newer EEPROM versions */ -int ath5k_eeprom_init(struct ath5k_hw *ah) +static int +ath5k_eeprom_read_turbo_modes(struct ath5k_hw *ah, + u32 *offset, unsigned int mode) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - unsigned int mode, i; - int ret; - u32 offset; + u32 o = *offset; u16 val; + int ret; - /* Initial TX thermal adjustment values */ - ee->ee_tx_clip = 4; - ee->ee_pwd_84 = ee->ee_pwd_90 = 1; - ee->ee_gain_select = 1; + if (ee->ee_version < AR5K_EEPROM_VERSION_5_0) + return 0; - /* - * Read values from EEPROM and store them in the capability structure - */ - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); + switch (mode){ + case AR5K_EEPROM_MODE_11A: + ee->ee_switch_settling_turbo[mode] = (val >> 6) & 0x7f; - /* Return if we have an old EEPROM */ - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) - return 0; + ee->ee_atn_tx_rx_turbo[mode] = (val >> 13) & 0x7; + AR5K_EEPROM_READ(o++, val); + ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x7) << 3; + ee->ee_margin_tx_rx_turbo[mode] = (val >> 3) & 0x3f; + + ee->ee_adc_desired_size_turbo[mode] = (val >> 9) & 0x7f; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size_turbo[mode] |= (val & 0x1) << 7; + ee->ee_pga_desired_size_turbo[mode] = (val >> 1) & 0xff; + + if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >=2) + ee->ee_pd_gain_overlap = (val >> 9) & 0xf; + break; + case AR5K_EEPROM_MODE_11G: + ee->ee_switch_settling_turbo[mode] = (val >> 8) & 0x7f; + + ee->ee_atn_tx_rx_turbo[mode] = (val >> 15) & 0x7; + AR5K_EEPROM_READ(o++, val); + ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x1f) << 1; + ee->ee_margin_tx_rx_turbo[mode] = (val >> 5) & 0x3f; + + ee->ee_adc_desired_size_turbo[mode] = (val >> 11) & 0x7f; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size_turbo[mode] |= (val & 0x7) << 5; + ee->ee_pga_desired_size_turbo[mode] = (val >> 3) & 0xff; + break; + } + + /* return new offset */ + *offset = o; + + return 0; +} + + +static int +ath5k_eeprom_init_modes(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 mode_offset[3]; + unsigned int mode; + u32 offset; + int ret; -#ifdef notyet /* - * Validate the checksum of the EEPROM date. There are some - * devices with invalid EEPROMs. + * Get values for all modes */ - for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { - AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); - cksum ^= val; + mode_offset[AR5K_EEPROM_MODE_11A] = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); + mode_offset[AR5K_EEPROM_MODE_11B] = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); + mode_offset[AR5K_EEPROM_MODE_11G] = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); + + ee->ee_turbo_max_power[AR5K_EEPROM_MODE_11A] = + AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) { + offset = mode_offset[mode]; + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + ret = ath5k_eeprom_read_turbo_modes(ah, &offset, mode); + if (ret) + return ret; } - if (cksum != AR5K_EEPROM_INFO_CKSUM) { - ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); - return -EIO; + + /* override for older eeprom versions for better performance */ + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) { + ee->ee_thr_62[AR5K_EEPROM_MODE_11A] = 15; + ee->ee_thr_62[AR5K_EEPROM_MODE_11B] = 28; + ee->ee_thr_62[AR5K_EEPROM_MODE_11G] = 28; } -#endif - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), - ee_ant_gain); + return 0; +} - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); - AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); - } +static inline void +ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) +{ + const static u16 intercepts3[] = + { 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 }; + const static u16 intercepts3_2[] = + { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; + const u16 *ip; + int i; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2) + ip = intercepts3_2; + else + ip = intercepts3; - if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { - AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); - ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; - ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; + for (i = 0; i < ARRAY_SIZE(intercepts3); i++) + *vp++ = (ip[i] * max + (100 - ip[i]) * min) / 100; +} - AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); - ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; - ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; +static inline int +ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max, + struct ath5k_chan_pcal_info *pc, u8 *count) +{ + int o = *offset; + int i = 0; + u8 f1, f2; + int ret; + u16 val; + + while(i < max) { + AR5K_EEPROM_READ(o++, val); + + f1 = (val >> 8) & 0xff; + f2 = val & 0xff; + + if (f1) + pc[i++].freq = f1; + + if (f2) + pc[i++].freq = f2; + + if (!f1 || !f2) + break; } + *offset = o; + *count = i; - /* - * Get conformance test limit values - */ - offset = AR5K_EEPROM_CTL(ah->ah_ee_version); - ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version); + return 0; +} + +static int +ath5k_eeprom_init_11a_pcal_freq(struct ath5k_hw *ah, int offset) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal = ee->ee_pwr_cal_a; + int i, ret; + u16 val; + u8 mask; + + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) { + ath5k_eeprom_read_freq_list(ah, &offset, + AR5K_EEPROM_N_5GHZ_CHAN, pcal, + &ee->ee_n_piers[AR5K_EEPROM_MODE_11A]); + } else { + mask = AR5K_EEPROM_FREQ_M(ah->ah_ee_version); - for (i = 0; i < ee->ee_ctls; i++) { AR5K_EEPROM_READ(offset++, val); - ee->ee_ctl[i] = (val >> 8) & 0xff; - ee->ee_ctl[i + 1] = val & 0xff; + pcal[0].freq = (val >> 9) & mask; + pcal[1].freq = (val >> 2) & mask; + pcal[2].freq = (val << 5) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[2].freq |= (val >> 11) & 0x1f; + pcal[3].freq = (val >> 4) & mask; + pcal[4].freq = (val << 3) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[4].freq |= (val >> 13) & 0x7; + pcal[5].freq = (val >> 6) & mask; + pcal[6].freq = (val << 1) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[6].freq |= (val >> 15) & 0x1; + pcal[7].freq = (val >> 8) & mask; + pcal[8].freq = (val >> 1) & mask; + pcal[9].freq = (val << 6) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[9].freq |= (val >> 10) & 0x3f; + ee->ee_n_piers[AR5K_EEPROM_MODE_11A] = 10; } - /* - * Get values for 802.11a (5GHz) - */ - mode = AR5K_EEPROM_MODE_11A; + for(i = 0; i < AR5K_EEPROM_N_5GHZ_CHAN; i += 1) { + pcal[i].freq = ath5k_eeprom_bin2freq(ee, + pcal[i].freq, AR5K_EEPROM_MODE_11A); + } - ee->ee_turbo_max_power[mode] = - AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); + return 0; +} - offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); +static inline int +ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal; + int i; + + switch(mode) { + case AR5K_EEPROM_MODE_11B: + pcal = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + pcal = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; + ath5k_eeprom_read_freq_list(ah, &offset, + AR5K_EEPROM_N_2GHZ_CHAN_2413, pcal, + &ee->ee_n_piers[mode]); + for(i = 0; i < AR5K_EEPROM_N_2GHZ_CHAN_2413; i += 1) { + pcal[i].freq = ath5k_eeprom_bin2freq(ee, + pcal[i].freq, mode); + } - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][3] = (val >> 5) & 0x7; - ee->ee_db[mode][3] = (val >> 2) & 0x7; - ee->ee_ob[mode][2] = (val << 1) & 0x7; - - AR5K_EEPROM_READ(offset++, val); - ee->ee_ob[mode][2] |= (val >> 15) & 0x1; - ee->ee_db[mode][2] = (val >> 12) & 0x7; - ee->ee_ob[mode][1] = (val >> 9) & 0x7; - ee->ee_db[mode][1] = (val >> 6) & 0x7; - ee->ee_ob[mode][0] = (val >> 3) & 0x7; - ee->ee_db[mode][0] = val & 0x7; - - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; + return 0; +} - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) { - AR5K_EEPROM_READ(offset++, val); - ee->ee_margin_tx_rx[mode] = val & 0x3f; + +static int +ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal; + int offset, ret; + int i, j; + u16 val; + + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + switch(mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + + ret = ath5k_eeprom_init_11a_pcal_freq(ah, + offset + AR5K_EEPROM_GROUP1_OFFSET); + if (ret < 0) + return ret; + + offset += AR5K_EEPROM_GROUP2_OFFSET; + pcal = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header) && + !AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + pcal = ee->ee_pwr_cal_b; + offset += AR5K_EEPROM_GROUP3_OFFSET; + + /* fixed piers */ + pcal[0].freq = 2412; + pcal[1].freq = 2447; + pcal[2].freq = 2484; + ee->ee_n_piers[mode] = 3; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + pcal = ee->ee_pwr_cal_g; + offset += AR5K_EEPROM_GROUP4_OFFSET; + + /* fixed piers */ + pcal[0].freq = 2312; + pcal[1].freq = 2412; + pcal[2].freq = 2484; + ee->ee_n_piers[mode] = 3; + break; + default: + return -EINVAL; } - /* - * Get values for 802.11b (2.4GHz) - */ - mode = AR5K_EEPROM_MODE_11B; - offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + struct ath5k_chan_pcal_info_rf5111 *cdata = + &pcal[i].rf5111_info; - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; + AR5K_EEPROM_READ(offset++, val); + cdata->pcdac_max = ((val >> 10) & AR5K_EEPROM_PCDAC_M); + cdata->pcdac_min = ((val >> 4) & AR5K_EEPROM_PCDAC_M); + cdata->pwr[0] = ((val << 2) & AR5K_EEPROM_POWER_M); - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][1] = (val >> 4) & 0x7; - ee->ee_db[mode][1] = val & 0x7; + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[0] |= ((val >> 14) & 0x3); + cdata->pwr[1] = ((val >> 8) & AR5K_EEPROM_POWER_M); + cdata->pwr[2] = ((val >> 2) & AR5K_EEPROM_POWER_M); + cdata->pwr[3] = ((val << 4) & AR5K_EEPROM_POWER_M); - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[3] |= ((val >> 12) & 0xf); + cdata->pwr[4] = ((val >> 6) & AR5K_EEPROM_POWER_M); + cdata->pwr[5] = (val & AR5K_EEPROM_POWER_M); - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][0] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - ee->ee_cal_pier[mode][1] = - ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); + cdata->pwr[6] = ((val >> 10) & AR5K_EEPROM_POWER_M); + cdata->pwr[7] = ((val >> 4) & AR5K_EEPROM_POWER_M); + cdata->pwr[8] = ((val << 2) & AR5K_EEPROM_POWER_M); AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][2] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + cdata->pwr[8] |= ((val >> 14) & 0x3); + cdata->pwr[9] = ((val >> 8) & AR5K_EEPROM_POWER_M); + cdata->pwr[10] = ((val >> 2) & AR5K_EEPROM_POWER_M); + + ath5k_get_pcdac_intercepts(ah, cdata->pcdac_min, + cdata->pcdac_max, cdata->pcdac); + + for (j = 0; j < AR5K_EEPROM_N_PCDAC; j++) { + cdata->pwr[j] = (u16) + (AR5K_EEPROM_POWER_STEP * cdata->pwr[j]); + } } - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + return 0; +} - /* - * Get values for 802.11g (2.4GHz) - */ - mode = AR5K_EEPROM_MODE_11G; - offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); +static int +ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5112 *chan_pcal_info; + struct ath5k_chan_pcal_info *gen_chan_info; + u32 offset; + unsigned int i, c; + u16 val; + int ret; - ret = ath5k_eeprom_read_ants(ah, &offset, mode); - if (ret) - return ret; + switch (mode) { + case AR5K_EEPROM_MODE_11A: + /* + * Read 5GHz EEPROM channels + */ + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + ath5k_eeprom_init_11a_pcal_freq(ah, offset); + + offset += AR5K_EEPROM_GROUP2_OFFSET; + gen_chan_info = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += AR5K_EEPROM_GROUP3_OFFSET; + + /* NB: frequency piers parsed during mode init */ + gen_chan_info = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += AR5K_EEPROM_GROUP4_OFFSET; + else if (AR5K_EEPROM_HDR_11B(ee->ee_header)) + offset += AR5K_EEPROM_GROUP2_OFFSET; + + /* NB: frequency piers parsed during mode init */ + gen_chan_info = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } - AR5K_EEPROM_READ(offset++, val); - ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); - ee->ee_ob[mode][1] = (val >> 4) & 0x7; - ee->ee_db[mode][1] = val & 0x7; + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + chan_pcal_info = &gen_chan_info[i].rf5112_info; - ret = ath5k_eeprom_read_modes(ah, &offset, mode); - if (ret) - return ret; + /* Power values in dBm * 4 + * for the lower xpd gain curve + * (0 dBm -> higher output power) */ + for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) { + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr_x0[c] = (val & 0xff); + chan_pcal_info->pwr_x0[++c] = ((val >> 8) & 0xff); + } - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + /* PCDAC steps + * corresponding to the above power + * measurements */ AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][0] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); - ee->ee_cal_pier[mode][1] = - ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode); + chan_pcal_info->pcdac_x0[1] = (val & 0x1f); + chan_pcal_info->pcdac_x0[2] = ((val >> 5) & 0x1f); + chan_pcal_info->pcdac_x0[3] = ((val >> 10) & 0x1f); + /* Power values in dBm * 4 + * for the higher xpd gain curve + * (18 dBm -> lower output power) */ AR5K_EEPROM_READ(offset++, val); - ee->ee_turbo_max_power[mode] = val & 0x7f; - ee->ee_xr_power[mode] = (val >> 7) & 0x3f; + chan_pcal_info->pwr_x3[0] = (val & 0xff); + chan_pcal_info->pwr_x3[1] = ((val >> 8) & 0xff); AR5K_EEPROM_READ(offset++, val); - ee->ee_cal_pier[mode][2] = - ath5k_eeprom_bin2freq(ah, val & 0xff, mode); + chan_pcal_info->pwr_x3[2] = (val & 0xff); + + /* PCDAC steps + * corresponding to the above power + * measurements (static) */ + chan_pcal_info->pcdac_x3[0] = 20; + chan_pcal_info->pcdac_x3[1] = 35; + chan_pcal_info->pcdac_x3[2] = 63; + + if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) { + chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0xff); + + /* Last xpd0 power level is also channel maximum */ + gen_chan_info[i].max_pwr = chan_pcal_info->pwr_x0[3]; + } else { + chan_pcal_info->pcdac_x0[0] = 1; + gen_chan_info[i].max_pwr = ((val >> 8) & 0xff); + } - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) - ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + /* Recreate pcdac_x0 table for this channel using pcdac steps */ + chan_pcal_info->pcdac_x0[1] += chan_pcal_info->pcdac_x0[0]; + chan_pcal_info->pcdac_x0[2] += chan_pcal_info->pcdac_x0[1]; + chan_pcal_info->pcdac_x0[3] += chan_pcal_info->pcdac_x0[2]; + } + + return 0; +} + +static inline unsigned int +ath5k_pdgains_size_2413(struct ath5k_eeprom_info *ee, unsigned int mode) +{ + static const unsigned int pdgains_size[] = { 4, 6, 9, 12 }; + unsigned int sz; + + sz = pdgains_size[ee->ee_pd_gains[mode] - 1]; + sz *= ee->ee_n_piers[mode]; + + return sz; +} + +static unsigned int +ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode) +{ + u32 offset = AR5K_EEPROM_CAL_DATA_START(ee->ee_misc4); + + switch(mode) { + case AR5K_EEPROM_MODE_11G: + if (AR5K_EEPROM_HDR_11B(ee->ee_header)) + offset += ath5k_pdgains_size_2413(ee, AR5K_EEPROM_MODE_11B) + 2; + /* fall through */ + case AR5K_EEPROM_MODE_11B: + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += ath5k_pdgains_size_2413(ee, AR5K_EEPROM_MODE_11A) + 5; + /* fall through */ + case AR5K_EEPROM_MODE_11A: + break; + default: + break; + } + + return offset; +} + +static int +ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf2413 *chan_pcal_info; + struct ath5k_chan_pcal_info *gen_chan_info; + unsigned int i, c; + u32 offset; + int ret; + u16 val; + u8 pd_gains = 0; + + if (ee->ee_x_gain[mode] & 0x1) pd_gains++; + if ((ee->ee_x_gain[mode] >> 1) & 0x1) pd_gains++; + if ((ee->ee_x_gain[mode] >> 2) & 0x1) pd_gains++; + if ((ee->ee_x_gain[mode] >> 3) & 0x1) pd_gains++; + ee->ee_pd_gains[mode] = pd_gains; + + offset = ath5k_cal_data_offset_2413(ee, mode); + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + + ath5k_eeprom_init_11a_pcal_freq(ah, offset); + offset += AR5K_EEPROM_N_5GHZ_CHAN / 2; + gen_chan_info = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) + return 0; + ath5k_eeprom_init_11bg_2413(ah, mode, offset); + offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + gen_chan_info = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + ath5k_eeprom_init_11bg_2413(ah, mode, offset); + offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + gen_chan_info = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + if (pd_gains == 0) + return 0; + + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + chan_pcal_info = &gen_chan_info[i].rf2413_info; + + /* + * Read pwr_i, pddac_i and the first + * 2 pd points (pwr, pddac) + */ AR5K_EEPROM_READ(offset++, val); - ee->ee_i_cal[mode] = (val >> 8) & 0x3f; - ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + chan_pcal_info->pwr_i[0] = val & 0x1f; + chan_pcal_info->pddac_i[0] = (val >> 5) & 0x7f; + chan_pcal_info->pwr[0][0] = + (val >> 12) & 0xf; - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pddac[0][0] = val & 0x3f; + chan_pcal_info->pwr[0][1] = (val >> 6) & 0xf; + chan_pcal_info->pddac[0][1] = + (val >> 10) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr[0][2] = val & 0xf; + chan_pcal_info->pddac[0][2] = + (val >> 4) & 0x3f; + + chan_pcal_info->pwr[0][3] = 0; + chan_pcal_info->pddac[0][3] = 0; + + if (pd_gains > 1) { + /* + * Pd gain 0 is not the last pd gain + * so it only has 2 pd points. + * Continue wih pd gain 1. + */ + chan_pcal_info->pwr_i[1] = (val >> 10) & 0x1f; + + chan_pcal_info->pddac_i[1] = (val >> 15) & 0x1; AR5K_EEPROM_READ(offset++, val); - ee->ee_cck_ofdm_gain_delta = val & 0xff; + chan_pcal_info->pddac_i[1] |= (val & 0x3F) << 1; + + chan_pcal_info->pwr[1][0] = (val >> 6) & 0xf; + chan_pcal_info->pddac[1][0] = + (val >> 10) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr[1][1] = val & 0xf; + chan_pcal_info->pddac[1][1] = + (val >> 4) & 0x3f; + chan_pcal_info->pwr[1][2] = + (val >> 10) & 0xf; + + chan_pcal_info->pddac[1][2] = + (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pddac[1][2] |= + (val & 0xF) << 2; + + chan_pcal_info->pwr[1][3] = 0; + chan_pcal_info->pddac[1][3] = 0; + } else if (pd_gains == 1) { + /* + * Pd gain 0 is the last one so + * read the extra point. + */ + chan_pcal_info->pwr[0][3] = + (val >> 10) & 0xf; + + chan_pcal_info->pddac[0][3] = + (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pddac[0][3] |= + (val & 0xF) << 2; + } + + /* + * Proceed with the other pd_gains + * as above. + */ + if (pd_gains > 2) { + chan_pcal_info->pwr_i[2] = (val >> 4) & 0x1f; + chan_pcal_info->pddac_i[2] = (val >> 9) & 0x7f; + + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr[2][0] = + (val >> 0) & 0xf; + chan_pcal_info->pddac[2][0] = + (val >> 4) & 0x3f; + chan_pcal_info->pwr[2][1] = + (val >> 10) & 0xf; + + chan_pcal_info->pddac[2][1] = + (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pddac[2][1] |= + (val & 0xF) << 2; + + chan_pcal_info->pwr[2][2] = + (val >> 4) & 0xf; + chan_pcal_info->pddac[2][2] = + (val >> 8) & 0x3f; + + chan_pcal_info->pwr[2][3] = 0; + chan_pcal_info->pddac[2][3] = 0; + } else if (pd_gains == 2) { + chan_pcal_info->pwr[1][3] = + (val >> 4) & 0xf; + chan_pcal_info->pddac[1][3] = + (val >> 8) & 0x3f; + } + + if (pd_gains > 3) { + chan_pcal_info->pwr_i[3] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr_i[3] |= ((val >> 0) & 0x7) << 2; + + chan_pcal_info->pddac_i[3] = (val >> 3) & 0x7f; + chan_pcal_info->pwr[3][0] = + (val >> 10) & 0xf; + chan_pcal_info->pddac[3][0] = + (val >> 14) & 0x3; + + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pddac[3][0] |= + (val & 0xF) << 2; + chan_pcal_info->pwr[3][1] = + (val >> 4) & 0xf; + chan_pcal_info->pddac[3][1] = + (val >> 8) & 0x3f; + + chan_pcal_info->pwr[3][2] = + (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr[3][2] |= + ((val >> 0) & 0x3) << 2; + + chan_pcal_info->pddac[3][2] = + (val >> 2) & 0x3f; + chan_pcal_info->pwr[3][3] = + (val >> 8) & 0xf; + + chan_pcal_info->pddac[3][3] = + (val >> 12) & 0xF; + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pddac[3][3] |= + ((val >> 0) & 0x3) << 4; + } else if (pd_gains == 3) { + chan_pcal_info->pwr[2][3] = + (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr[2][3] |= + ((val >> 0) & 0x3) << 2; + + chan_pcal_info->pddac[2][3] = + (val >> 2) & 0x3f; + } + + for (c = 0; c < pd_gains; c++) { + /* Recreate pwr table for this channel using pwr steps */ + chan_pcal_info->pwr[c][0] += chan_pcal_info->pwr_i[c] * 2; + chan_pcal_info->pwr[c][1] += chan_pcal_info->pwr[c][0]; + chan_pcal_info->pwr[c][2] += chan_pcal_info->pwr[c][1]; + chan_pcal_info->pwr[c][3] += chan_pcal_info->pwr[c][2]; + if (chan_pcal_info->pwr[c][3] == chan_pcal_info->pwr[c][2]) + chan_pcal_info->pwr[c][3] = 0; + + /* Recreate pddac table for this channel using pddac steps */ + chan_pcal_info->pddac[c][0] += chan_pcal_info->pddac_i[c]; + chan_pcal_info->pddac[c][1] += chan_pcal_info->pddac[c][0]; + chan_pcal_info->pddac[c][2] += chan_pcal_info->pddac[c][1]; + chan_pcal_info->pddac[c][3] += chan_pcal_info->pddac[c][2]; + if (chan_pcal_info->pddac[c][3] == chan_pcal_info->pddac[c][2]) + chan_pcal_info->pddac[c][3] = 0; } } - /* - * Read 5GHz EEPROM channels - */ + return 0; +} + +/* + * Read per rate target power (this is the maximum tx power + * supported by the card). This info is used when setting + * tx power, no matter the channel. + * + * This also works for v5 EEPROMs. + */ +static int ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_rate_pcal_info *rate_pcal_info; + u16 *rate_target_pwr_num; + u32 offset; + u16 val; + int ret, i; + + offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1); + rate_target_pwr_num = &ee->ee_rate_target_pwr_num[mode]; + switch (mode) { + case AR5K_EEPROM_MODE_11A: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_a; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN; + break; + case AR5K_EEPROM_MODE_11B: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_b; + ee->ee_rate_target_pwr_num[mode] = 2; /* 3rd is g mode's 1st */ + break; + case AR5K_EEPROM_MODE_11G: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11G(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_g; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_2GHZ_CHAN; + break; + default: + return -EINVAL; + } + + /* Different freq mask for older eeproms (<= v3.2) */ + if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2) { + for (i = 0; i < (*rate_target_pwr_num); i++) { + AR5K_EEPROM_READ(offset++, val); + rate_pcal_info[i].freq = + ath5k_eeprom_bin2freq(ee, (val >> 9) & 0x7f, mode); + + rate_pcal_info[i].target_power_6to24 = ((val >> 3) & 0x3f); + rate_pcal_info[i].target_power_36 = (val << 3) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + + if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS || + val == 0) { + (*rate_target_pwr_num) = i; + break; + } + + rate_pcal_info[i].target_power_36 |= ((val >> 13) & 0x7); + rate_pcal_info[i].target_power_48 = ((val >> 7) & 0x3f); + rate_pcal_info[i].target_power_54 = ((val >> 1) & 0x3f); + } + } else { + for (i = 0; i < (*rate_target_pwr_num); i++) { + AR5K_EEPROM_READ(offset++, val); + rate_pcal_info[i].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + + rate_pcal_info[i].target_power_6to24 = ((val >> 2) & 0x3f); + rate_pcal_info[i].target_power_36 = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + + if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS || + val == 0) { + (*rate_target_pwr_num) = i; + break; + } + + rate_pcal_info[i].target_power_36 |= (val >> 12) & 0xf; + rate_pcal_info[i].target_power_48 = ((val >> 6) & 0x3f); + rate_pcal_info[i].target_power_54 = (val & 0x3f); + } + } + + return 0; +} + +static int +ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + int (*read_pcal)(struct ath5k_hw *hw, int mode); + int mode; + int err; + + if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) && + (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 1)) + read_pcal = ath5k_eeprom_read_pcal_info_5112; + else if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0) && + (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 2)) + read_pcal = ath5k_eeprom_read_pcal_info_2413; + else + read_pcal = ath5k_eeprom_read_pcal_info_5111; + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) { + err = read_pcal(ah, mode); + if (err) + return err; + + err = ath5k_eeprom_read_target_rate_pwr_info(ah, mode); + if (err < 0) + return err; + } + + return 0; +} + +/* Read conformance test limits */ +static int +ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_edge_power *rep; + unsigned int fmask, pmask; + unsigned int ctl_mode; + int ret, i, j; + u32 offset; + u16 val; + + pmask = AR5K_EEPROM_POWER_M; + fmask = AR5K_EEPROM_FREQ_M(ee->ee_version); + offset = AR5K_EEPROM_CTL(ee->ee_version); + ee->ee_ctls = AR5K_EEPROM_N_CTLS(ee->ee_version); + for (i = 0; i < ee->ee_ctls; i += 2) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_ctl[i] = (val >> 8) & 0xff; + ee->ee_ctl[i + 1] = val & 0xff; + } + + offset = AR5K_EEPROM_GROUP8_OFFSET; + if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0) + offset += AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) - + AR5K_EEPROM_GROUP5_OFFSET; + else + offset += AR5K_EEPROM_GROUPS_START(ee->ee_version); + + rep = ee->ee_ctl_pwr; + for(i = 0; i < ee->ee_ctls; i++) { + switch(ee->ee_ctl[i] & AR5K_CTL_MODE_M) { + case AR5K_CTL_11A: + case AR5K_CTL_TURBO: + ctl_mode = AR5K_EEPROM_MODE_11A; + break; + default: + ctl_mode = AR5K_EEPROM_MODE_11G; + break; + } + if (ee->ee_ctl[i] == 0) { + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) + offset += 8; + else + offset += 7; + rep += AR5K_EEPROM_N_EDGES; + continue; + } + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) { + for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) { + AR5K_EEPROM_READ(offset++, val); + rep[j].freq = (val >> 8) & fmask; + rep[j + 1].freq = val & fmask; + } + for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) { + AR5K_EEPROM_READ(offset++, val); + rep[j].edge = (val >> 8) & pmask; + rep[j].flag = (val >> 14) & 1; + rep[j + 1].edge = val & pmask; + rep[j + 1].flag = (val >> 6) & 1; + } + } else { + AR5K_EEPROM_READ(offset++, val); + rep[0].freq = (val >> 9) & fmask; + rep[1].freq = (val >> 2) & fmask; + rep[2].freq = (val << 5) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[2].freq |= (val >> 11) & 0x1f; + rep[3].freq = (val >> 4) & fmask; + rep[4].freq = (val << 3) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[4].freq |= (val >> 13) & 0x7; + rep[5].freq = (val >> 6) & fmask; + rep[6].freq = (val << 1) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[6].freq |= (val >> 15) & 0x1; + rep[7].freq = (val >> 8) & fmask; + + rep[0].edge = (val >> 2) & pmask; + rep[1].edge = (val << 4) & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[1].edge |= (val >> 12) & 0xf; + rep[2].edge = (val >> 6) & pmask; + rep[3].edge = val & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[4].edge = (val >> 10) & pmask; + rep[5].edge = (val >> 4) & pmask; + rep[6].edge = (val << 2) & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[6].edge |= (val >> 14) & 0x3; + rep[7].edge = (val >> 8) & pmask; + } + for (j = 0; j < AR5K_EEPROM_N_EDGES; j++) { + rep[j].freq = ath5k_eeprom_bin2freq(ee, + rep[j].freq, ctl_mode); + } + rep += AR5K_EEPROM_N_EDGES; + } return 0; } + +/* + * Initialize eeprom power tables + */ +int +ath5k_eeprom_init(struct ath5k_hw *ah) +{ + int err; + + err = ath5k_eeprom_init_header(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_init_modes(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_read_pcal_info(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_read_ctl_info(ah); + if (err < 0) + return err; + + return 0; +} /* * Read the MAC address from eeprom */ diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath5k/eeprom.h index a468ecfbb18a..09eb7d0176a4 100644 --- a/drivers/net/wireless/ath5k/eeprom.h +++ b/drivers/net/wireless/ath5k/eeprom.h @@ -25,24 +25,8 @@ #define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */ #define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ -#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ -#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ -#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ -#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 -#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ -#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 -#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ -#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 -#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ -#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 -#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ -#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 -#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ -#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 -#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ -#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 #define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ +#define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */ #define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ #define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) #define AR5K_EEPROM_INFO_CKSUM 0xffff @@ -53,15 +37,19 @@ #define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ #define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ #define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */ -#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ +#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ #define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ #define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ -#define AR5K_EEPROM_VERSION_4_3 0x4003 +#define AR5K_EEPROM_VERSION_4_3 0x4003 /* power calibration changes */ #define AR5K_EEPROM_VERSION_4_4 0x4004 #define AR5K_EEPROM_VERSION_4_5 0x4005 #define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ -#define AR5K_EEPROM_VERSION_4_7 0x4007 +#define AR5K_EEPROM_VERSION_4_7 0x3007 /* 4007 ? */ +#define AR5K_EEPROM_VERSION_4_9 0x4009 /* EAR futureproofing */ +#define AR5K_EEPROM_VERSION_5_0 0x5000 /* Has 2413 PDADC calibration etc */ +#define AR5K_EEPROM_VERSION_5_1 0x5001 /* Has capability values */ +#define AR5K_EEPROM_VERSION_5_3 0x5003 /* Has spur mitigation tables */ #define AR5K_EEPROM_MODE_11A 0 #define AR5K_EEPROM_MODE_11B 1 @@ -74,8 +62,8 @@ #define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */ #define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */ #define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) -#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */ #define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz */ #define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c #define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 @@ -87,27 +75,95 @@ (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) #define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) -#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff)) -#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff)) +#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((s8)(((_v) >> 8) & 0xff)) +#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((s8)((_v) & 0xff)) + +/* Misc values available since EEPROM 4.0 */ +#define AR5K_EEPROM_MISC0 AR5K_EEPROM_INFO(4) +#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HDR_XR2_DIS(_v) (((_v) >> 12) & 0x1) +#define AR5K_EEPROM_HDR_XR5_DIS(_v) (((_v) >> 13) & 0x1) +#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) + +#define AR5K_EEPROM_MISC1 AR5K_EEPROM_INFO(5) +#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) +#define AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(_v) (((_v) >> 15) & 0x1) + +#define AR5K_EEPROM_MISC2 AR5K_EEPROM_INFO(6) +#define AR5K_EEPROM_EEP_FILE_VERSION(_v) (((_v) >> 8) & 0xff) +#define AR5K_EEPROM_EAR_FILE_VERSION(_v) ((_v) & 0xff) + +#define AR5K_EEPROM_MISC3 AR5K_EEPROM_INFO(7) +#define AR5K_EEPROM_ART_BUILD_NUM(_v) (((_v) >> 10) & 0x3f) +#define AR5K_EEPROM_EAR_FILE_ID(_v) ((_v) & 0xff) + +#define AR5K_EEPROM_MISC4 AR5K_EEPROM_INFO(8) +#define AR5K_EEPROM_CAL_DATA_START(_v) (((_v) >> 4) & 0xfff) +#define AR5K_EEPROM_MASK_R0(_v) (((_v) >> 2) & 0x3) +#define AR5K_EEPROM_MASK_R1(_v) ((_v) & 0x3) + +#define AR5K_EEPROM_MISC5 AR5K_EEPROM_INFO(9) +#define AR5K_EEPROM_COMP_DIS(_v) ((_v) & 0x1) +#define AR5K_EEPROM_AES_DIS(_v) (((_v) >> 1) & 0x1) +#define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1) +#define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1) +#define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf) +#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) +#define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf) + +#define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10) +#define AR5K_EEPROM_TX_CHAIN_DIS ((_v) & 0x8) +#define AR5K_EEPROM_RX_CHAIN_DIS (((_v) >> 3) & 0x8) +#define AR5K_EEPROM_FCC_MID_EN (((_v) >> 6) & 0x1) +#define AR5K_EEPROM_JAP_U1EVEN_EN (((_v) >> 7) & 0x1) +#define AR5K_EEPROM_JAP_U2_EN (((_v) >> 8) & 0x1) +#define AR5K_EEPROM_JAP_U1ODD_EN (((_v) >> 9) & 0x1) +#define AR5K_EEPROM_JAP_11A_NEW_EN (((_v) >> 10) & 0x1) /* calibration settings */ #define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) #define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) #define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) #define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ +#define AR5K_EEPROM_GROUPS_START(_v) AR5K_EEPROM_OFF(_v, 0x0100, 0x0150) /* Start of Groups */ +#define AR5K_EEPROM_GROUP1_OFFSET 0x0 +#define AR5K_EEPROM_GROUP2_OFFSET 0x5 +#define AR5K_EEPROM_GROUP3_OFFSET 0x37 +#define AR5K_EEPROM_GROUP4_OFFSET 0x46 +#define AR5K_EEPROM_GROUP5_OFFSET 0x55 +#define AR5K_EEPROM_GROUP6_OFFSET 0x65 +#define AR5K_EEPROM_GROUP7_OFFSET 0x69 +#define AR5K_EEPROM_GROUP8_OFFSET 0x6f + +#define AR5K_EEPROM_TARGET_PWR_OFF_11A(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP5_OFFSET, 0x0000) +#define AR5K_EEPROM_TARGET_PWR_OFF_11B(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP6_OFFSET, 0x0010) +#define AR5K_EEPROM_TARGET_PWR_OFF_11G(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP7_OFFSET, 0x0014) /* [3.1 - 3.3] */ #define AR5K_EEPROM_OBDB0_2GHZ 0x00ec #define AR5K_EEPROM_OBDB1_2GHZ 0x00ed -/* Misc values available since EEPROM 4.0 */ -#define AR5K_EEPROM_MISC0 0x00c4 -#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) -#define AR5K_EEPROM_MISC1 0x00c5 -#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) -#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) - +#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ +#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ +#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 +#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ +#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 +#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ +#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 +#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ +#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 +#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ +#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 +#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ +#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 +#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ +#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 /* Some EEPROM defines */ #define AR5K_EEPROM_EEP_SCALE 100 @@ -115,8 +171,11 @@ #define AR5K_EEPROM_N_MODES 3 #define AR5K_EEPROM_N_5GHZ_CHAN 10 #define AR5K_EEPROM_N_2GHZ_CHAN 3 +#define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 #define AR5K_EEPROM_MAX_CHAN 10 +#define AR5K_EEPROM_N_PWR_POINTS_5111 11 #define AR5K_EEPROM_N_PCDAC 11 +#define AR5K_EEPROM_N_PHASE_CAL 5 #define AR5K_EEPROM_N_TEST_FREQ 8 #define AR5K_EEPROM_N_EDGES 8 #define AR5K_EEPROM_N_INTERCEPTS 11 @@ -136,6 +195,8 @@ #define AR5K_EEPROM_N_XPD_PER_CHANNEL 4 #define AR5K_EEPROM_N_XPD0_POINTS 4 #define AR5K_EEPROM_N_XPD3_POINTS 3 +#define AR5K_EEPROM_N_PD_GAINS 4 +#define AR5K_EEPROM_N_PD_POINTS 5 #define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 #define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 #define AR5K_EEPROM_POWER_M 0x3f @@ -158,8 +219,99 @@ #define AR5K_EEPROM_READ_HDR(_o, _v) \ AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ -/* Struct to hold EEPROM calibration data */ +enum ath5k_ant_setting { + AR5K_ANT_VARIABLE = 0, /* variable by programming */ + AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ + AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */ + AR5K_ANT_MAX = 3, +}; + +enum ath5k_ctl_mode { + AR5K_CTL_11A = 0, + AR5K_CTL_11B = 1, + AR5K_CTL_11G = 2, + AR5K_CTL_TURBO = 3, + AR5K_CTL_108G = 4, + AR5K_CTL_2GHT20 = 5, + AR5K_CTL_5GHT20 = 6, + AR5K_CTL_2GHT40 = 7, + AR5K_CTL_5GHT40 = 8, + AR5K_CTL_MODE_M = 15, +}; + +/* Per channel calibration data, used for power table setup */ +struct ath5k_chan_pcal_info_rf5111 { + /* Power levels in half dbm units + * for one power curve. */ + u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; + /* PCDAC table steps + * for the above values */ + u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111]; + /* Starting PCDAC step */ + u8 pcdac_min; + /* Final PCDAC step */ + u8 pcdac_max; +}; + +struct ath5k_chan_pcal_info_rf5112 { + /* Power levels in quarter dBm units + * for lower (0) and higher (3) + * level curves */ + s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS]; + s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS]; + /* PCDAC table steps + * for the above values */ + u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS]; + u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS]; +}; + +struct ath5k_chan_pcal_info_rf2413 { + /* Starting pwr/pddac values */ + s8 pwr_i[AR5K_EEPROM_N_PD_GAINS]; + u8 pddac_i[AR5K_EEPROM_N_PD_GAINS]; + /* (pwr,pddac) points */ + s8 pwr[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; + u8 pddac[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; +}; + +struct ath5k_chan_pcal_info { + /* Frequency */ + u16 freq; + /* Max available power */ + s8 max_pwr; + union { + struct ath5k_chan_pcal_info_rf5111 rf5111_info; + struct ath5k_chan_pcal_info_rf5112 rf5112_info; + struct ath5k_chan_pcal_info_rf2413 rf2413_info; + }; +}; + +/* Per rate calibration data for each mode, used for power table setup */ +struct ath5k_rate_pcal_info { + u16 freq; /* Frequency */ + /* Power level for 6-24Mbit/s rates */ + u16 target_power_6to24; + /* Power level for 36Mbit rate */ + u16 target_power_36; + /* Power level for 48Mbit rate */ + u16 target_power_48; + /* Power level for 54Mbit rate */ + u16 target_power_54; +}; + +/* Power edges for conformance test limits */ +struct ath5k_edge_power { + u16 freq; + u16 edge; /* in half dBm */ + bool flag; +}; + +/* EEPROM calibration data */ struct ath5k_eeprom_info { + + /* Header information */ u16 ee_magic; u16 ee_protect; u16 ee_regdomain; @@ -168,6 +320,11 @@ struct ath5k_eeprom_info { u16 ee_ant_gain; u16 ee_misc0; u16 ee_misc1; + u16 ee_misc2; + u16 ee_misc3; + u16 ee_misc4; + u16 ee_misc5; + u16 ee_misc6; u16 ee_cck_ofdm_gain_delta; u16 ee_cck_ofdm_power_delta; u16 ee_scaled_cck_delta; @@ -185,7 +342,7 @@ struct ath5k_eeprom_info { u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; u16 ee_xr_power[AR5K_EEPROM_N_MODES]; u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; - u16 ee_ant_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_atn_tx_rx[AR5K_EEPROM_N_MODES]; u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; @@ -198,18 +355,40 @@ struct ath5k_eeprom_info { u16 ee_x_gain[AR5K_EEPROM_N_MODES]; u16 ee_i_gain[AR5K_EEPROM_N_MODES]; u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_switch_settling_turbo[AR5K_EEPROM_N_MODES]; + u16 ee_margin_tx_rx_turbo[AR5K_EEPROM_N_MODES]; + u16 ee_atn_tx_rx_turbo[AR5K_EEPROM_N_MODES]; - /* Unused */ + /* Power calibration data */ u16 ee_false_detect[AR5K_EEPROM_N_MODES]; - u16 ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN]; - u16 ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/ + + /* Number of pd gain curves per mode (RF2413) */ + u8 ee_pd_gains[AR5K_EEPROM_N_MODES]; + + u8 ee_n_piers[AR5K_EEPROM_N_MODES]; + struct ath5k_chan_pcal_info ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN]; + struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN]; + struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN]; + + /* Per rate target power levels */ + u16 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES]; + struct ath5k_rate_pcal_info ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN]; + struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN]; + struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN]; /* Conformance test limits (Unused) */ u16 ee_ctls; u16 ee_ctl[AR5K_EEPROM_MAX_CTLS]; + struct ath5k_edge_power ee_ctl_pwr[AR5K_EEPROM_N_EDGES * AR5K_EEPROM_MAX_CTLS]; /* Noise Floor Calibration settings */ s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; + s8 ee_adc_desired_size_turbo[AR5K_EEPROM_N_MODES]; + s8 ee_pga_desired_size_turbo[AR5K_EEPROM_N_MODES]; + s8 ee_pd_gain_overlap; + + u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; }; + diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index 5003263c9ea4..dc2d7d8bdb7a 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -674,7 +674,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, 0xffffc07f); AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN, - (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000, + (ee->ee_atn_tx_rx[ee_mode] << 12) & 0x3f000, 0xfffc0fff); AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE, (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | -- cgit v1.2.2 From e2f367f269fe19375f10e63efe0f2a6d3ddef8e6 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Fri, 21 Nov 2008 19:01:30 +0200 Subject: nl80211: Report max TX power in NL80211_BAND_ATTR_FREQS This is useful information to provide for userspace (e.g., hostapd needs this to generate Country IE). Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 4 ++++ net/wireless/nl80211.c | 3 +++ 2 files changed, 7 insertions(+) diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 79827345351d..54d6ebe38e39 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -508,6 +508,7 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in dBm. */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, @@ -516,12 +517,15 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, NL80211_FREQUENCY_ATTR_NO_IBSS, NL80211_FREQUENCY_ATTR_RADAR, + NL80211_FREQUENCY_ATTR_MAX_TX_POWER, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 }; +#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER + /** * enum nl80211_bitrate_attr - bitrate attributes * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 00121ceddb14..2e8464eaaaa2 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -198,6 +198,9 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, if (chan->flags & IEEE80211_CHAN_RADAR) NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_RADAR); + NLA_PUT_U8(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + chan->max_power); + nla_nest_end(msg, nl_freq); } -- cgit v1.2.2 From 5925d976fbe99859d636e7075e5304625503c5fe Mon Sep 17 00:00:00 2001 From: Vivek Natarajan Date: Fri, 21 Nov 2008 22:19:50 -0800 Subject: mac80211: Look out for some other AP when disassoc is received. When a disassoc packet is received from the AP with a reason code of 'leaving the BSS', mac80211 should go into DISABLED state just as it would do if the AP suddenly went away for some reason, as that is what will happen shortly after the AP leaves anyway. Signed-off-by: Vivek Natarajan Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 30adaddeed27..7600ac9b87fe 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -802,6 +802,10 @@ static void ieee80211_authenticate(struct ieee80211_sub_if_data *sdata, mod_timer(&ifsta->timer, jiffies + IEEE80211_AUTH_TIMEOUT); } +/* + * The disassoc 'reason' argument can be either our own reason + * if self disconnected or a reason code from the AP. + */ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_sta *ifsta, bool deauth, bool self_disconnected, u16 reason) @@ -848,7 +852,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, ieee80211_sta_send_apinfo(sdata, ifsta); - if (self_disconnected) + if (self_disconnected || reason == WLAN_REASON_DISASSOC_STA_HAS_LEFT) ifsta->state = IEEE80211_STA_MLME_DISABLED; sta_info_unlink(&sta); @@ -1163,7 +1167,7 @@ static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, IEEE80211_RETRY_AUTH_INTERVAL); } - ieee80211_set_disassoc(sdata, ifsta, false, false, 0); + ieee80211_set_disassoc(sdata, ifsta, false, false, reason_code); } -- cgit v1.2.2 From f80b5e99c7dac5a9a0d72496cec5075a12cd1476 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Fri, 21 Nov 2008 20:40:09 -0200 Subject: rfkill: preserve state across suspend The rfkill class API requires that the driver connected to a class call rfkill_force_state() on resume to update the real state of the rfkill controller, OR that it provides a get_state() hook. This means there is potentially a hidden call in the resume code flow that changes rfkill->state (i.e. rfkill_force_state()), so the previous state of the transmitter was being lost. The simplest and most future-proof way to fix this is to explicitly store the pre-sleep state on the rfkill structure, and restore from that on resume. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Cc: Matthew Garrett Cc: Alan Jenkins Signed-off-by: John W. Linville --- include/linux/rfkill.h | 1 + net/rfkill/rfkill.c | 7 ++++++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 4cd64b0d9825..f376a93927f7 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -108,6 +108,7 @@ struct rfkill { struct device dev; struct list_head node; + enum rfkill_state state_for_resume; }; #define to_rfkill(d) container_of(d, struct rfkill, dev) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index ec26eae8004d..5ad411d3e8f8 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -565,10 +565,15 @@ static void rfkill_release(struct device *dev) #ifdef CONFIG_PM static int rfkill_suspend(struct device *dev, pm_message_t state) { + struct rfkill *rfkill = to_rfkill(dev); + /* mark class device as suspended */ if (dev->power.power_state.event != state.event) dev->power.power_state = state; + /* store state for the resume handler */ + rfkill->state_for_resume = rfkill->state; + return 0; } @@ -590,7 +595,7 @@ static int rfkill_resume(struct device *dev) rfkill_toggle_radio(rfkill, rfkill_epo_lock_active ? RFKILL_STATE_SOFT_BLOCKED : - rfkill->state, + rfkill->state_for_resume, 1); mutex_unlock(&rfkill->mutex); -- cgit v1.2.2 From 24689c8590be6bc0486af665c5ceda6aeff4d53a Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Fri, 21 Nov 2008 20:40:10 -0200 Subject: rfkill: always call get_state() hook on resume We "optimize" away the get_state() hook call on rfkill_toggle_radio when doing a forced state change. This means the resume path is not calling get_state() as it should. Call it manually on the resume handler, as we don't want to mess with the EPO path by removing the optimization. This has the added benefit of making it explicit that rfkill->state could have been modified before we hit the rfkill_toggle_radio() call in the class resume handler. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Cc: Matthew Garrett Cc: Alan Jenkins Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index 5ad411d3e8f8..051d2c9ea66b 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -580,12 +580,22 @@ static int rfkill_suspend(struct device *dev, pm_message_t state) static int rfkill_resume(struct device *dev) { struct rfkill *rfkill = to_rfkill(dev); + enum rfkill_state newstate; if (dev->power.power_state.event != PM_EVENT_ON) { mutex_lock(&rfkill->mutex); dev->power.power_state.event = PM_EVENT_ON; + /* + * rfkill->state could have been modified before we got + * called, and won't be updated by rfkill_toggle_radio() + * in force mode. Sync it FIRST. + */ + if (rfkill->get_state && + !rfkill->get_state(rfkill->data, &newstate)) + rfkill->state = newstate; + /* * If we are under EPO, kick transmitter offline, * otherwise restore to pre-suspend state. -- cgit v1.2.2 From cb71d9bafb37adab50ddce53bb119a84b4966c06 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 21 Nov 2008 17:41:33 -0800 Subject: ath9k: Handle -ENOMEM on RX gracefully We would get an oops on RX on -ENOMEM by passing NULL to the hardware on ath_rx_buf_link(). The oops would look something like this: ath_rx_tasklet+0x515/0x53b ath9k_tasklet+0x48 tasklet_action __do_softirq irq_exit do_IRQ RIP: ath_rx_buf_link+0x3a We correct this by handling the requeue directly on the ath_rx_tasklet() and trying to allocate an skb *prior* to sending up the last hardware processed skb. If we run out of memory this gauranteees we have skbs to work with while it simply drops new received frames. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/recv.c | 57 ++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 31 deletions(-) diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 20f83779278a..6eae2542392a 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -81,29 +81,6 @@ static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, u32 len) return skb; } -static void ath_rx_requeue(struct ath_softc *sc, struct ath_buf *bf) -{ - struct sk_buff *skb; - - ASSERT(bf != NULL); - - if (bf->bf_mpdu == NULL) { - skb = ath_rxbuf_alloc(sc, sc->sc_rxbufsize); - if (skb != NULL) { - bf->bf_mpdu = skb; - bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, - PCI_DMA_FROMDEVICE); - bf->bf_dmacontext = bf->bf_buf_addr; - - } - } - - list_move_tail(&bf->list, &sc->sc_rxbuf); - ath_rx_buf_link(sc, bf); -} - - static int ath_rate2idx(struct ath_softc *sc, int rate) { int i = 0, cur_band, n_rates; @@ -445,7 +422,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) struct ath_buf *bf; struct ath_desc *ds; - struct sk_buff *skb = NULL; + struct sk_buff *skb = NULL, *requeue_skb; struct ieee80211_rx_status rx_status; struct ath_hal *ah = sc->sc_ah; struct ieee80211_hdr *hdr; @@ -522,17 +499,28 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) * chain it back at the queue without processing it. */ if (flush) - goto rx_next; + goto requeue; if (!ds->ds_rxstat.rs_datalen) - goto rx_next; + goto requeue; /* The status portion of the descriptor could get corrupted. */ if (sc->sc_rxbufsize < ds->ds_rxstat.rs_datalen) - goto rx_next; + goto requeue; if (!ath_rx_prepare(skb, ds, &rx_status, &decrypt_error, sc)) - goto rx_next; + goto requeue; + + /* Ensure we always have an skb to requeue once we are done + * processing the current buffer's skb */ + requeue_skb = ath_rxbuf_alloc(sc, sc->sc_rxbufsize); + + /* If there is no memory we ignore the current RX'd frame, + * tell hardware it can give us a new frame using the old + * skb and put it at the tail of the sc->sc_rxbuf list for + * processing. */ + if (!requeue_skb) + goto requeue; /* Sync and unmap the frame */ pci_dma_sync_single_for_cpu(sc->pdev, bf->bf_buf_addr, @@ -569,7 +557,13 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) /* Send the frame to mac80211 */ __ieee80211_rx(sc->hw, skb, &rx_status); - bf->bf_mpdu = NULL; + + /* We will now give hardware our shiny new allocated skb */ + bf->bf_mpdu = requeue_skb; + bf->bf_buf_addr = pci_map_single(sc->pdev, requeue_skb->data, + sc->sc_rxbufsize, + PCI_DMA_FROMDEVICE); + bf->bf_dmacontext = bf->bf_buf_addr; /* * change the default rx antenna if rx diversity chooses the @@ -581,8 +575,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) } else { sc->sc_rxotherant = 0; } -rx_next: - ath_rx_requeue(sc, bf); +requeue: + list_move_tail(&bf->list, &sc->sc_rxbuf); + ath_rx_buf_link(sc, bf); } while (1); spin_unlock_bh(&sc->sc_rxbuflock); -- cgit v1.2.2 From 7473431297761fa644a128a497b91e299676f501 Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sat, 22 Nov 2008 10:37:25 +0000 Subject: orinoco: Separate fw caching from download This refactorring will make it easier to share logic with Symbol firmware. Signed-off by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/orinoco.c | 53 ++++++++++++++++++++++++---------- 1 file changed, 38 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c index 7ec038ac1c36..492f419d18f4 100644 --- a/drivers/net/wireless/orinoco/orinoco.c +++ b/drivers/net/wireless/orinoco/orinoco.c @@ -431,9 +431,9 @@ struct fw_info { }; const static struct fw_info orinoco_fw[] = { - { "", "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 }, - { "", "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 }, - { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", "", 0x00003100, 512 } + { NULL, "agere_sta_fw.bin", "agere_ap_fw.bin", 0x00390000, 1000 }, + { NULL, "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 }, + { "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", NULL, 0x00003100, 512 } }; /* Structure used to access fields in FW @@ -487,18 +487,17 @@ orinoco_dl_firmware(struct orinoco_private *priv, if (err) goto free; - if (priv->cached_fw) - fw_entry = priv->cached_fw; - else { + if (!priv->cached_fw) { err = request_firmware(&fw_entry, firmware, priv->dev); + if (err) { printk(KERN_ERR "%s: Cannot find firmware %s\n", dev->name, firmware); err = -ENOENT; goto free; } - priv->cached_fw = fw_entry; - } + } else + fw_entry = priv->cached_fw; hdr = (const struct orinoco_fw_header *) fw_entry->data; @@ -540,11 +539,9 @@ orinoco_dl_firmware(struct orinoco_private *priv, dev->name, hermes_present(hw)); abort: - /* In case of error, assume firmware was bogus and release it */ - if (err) { - priv->cached_fw = NULL; + /* If we requested the firmware, release it. */ + if (!priv->cached_fw) release_firmware(fw_entry); - } free: kfree(pda); @@ -708,6 +705,30 @@ static int orinoco_download(struct orinoco_private *priv) return err; } +static void orinoco_cache_fw(struct orinoco_private *priv, int ap) +{ + const struct firmware *fw_entry = NULL; + const char *fw; + + if (ap) + fw = orinoco_fw[priv->firmware_type].ap_fw; + else + fw = orinoco_fw[priv->firmware_type].sta_fw; + + if (fw) { + if (request_firmware(&fw_entry, fw, priv->dev) == 0) + priv->cached_fw = fw_entry; + } +} + +static void orinoco_uncache_fw(struct orinoco_private *priv) +{ + if (priv->cached_fw) + release_firmware(priv->cached_fw); + + priv->cached_fw = NULL; +} + /********************************************************************/ /* Device methods */ /********************************************************************/ @@ -3304,6 +3325,8 @@ static int orinoco_init(struct net_device *dev) } if (priv->do_fw_download) { + orinoco_cache_fw(priv, 0); + err = orinoco_download(priv); if (err) priv->do_fw_download = 0; @@ -3553,9 +3576,9 @@ void free_orinocodev(struct net_device *dev) * when we call tasklet_kill it will run one final time, * emptying the list */ tasklet_kill(&priv->rx_tasklet); - if (priv->cached_fw) - release_firmware(priv->cached_fw); - priv->cached_fw = NULL; + + orinoco_uncache_fw(priv); + priv->wpa_ie_len = 0; kfree(priv->wpa_ie); orinoco_mic_free(priv); -- cgit v1.2.2 From 2cea7b261942009e90befbe41d998e2931547026 Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sat, 22 Nov 2008 10:37:26 +0000 Subject: orinoco: Cache Symbol firmware Signed-off by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/orinoco.c | 46 +++++++++++++++++++++++----------- drivers/net/wireless/orinoco/orinoco.h | 3 ++- 2 files changed, 34 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c index 492f419d18f4..09eec7f620bc 100644 --- a/drivers/net/wireless/orinoco/orinoco.c +++ b/drivers/net/wireless/orinoco/orinoco.c @@ -645,34 +645,41 @@ symbol_dl_firmware(struct orinoco_private *priv, int ret; const struct firmware *fw_entry; - if (request_firmware(&fw_entry, fw->pri_fw, - priv->dev) != 0) { - printk(KERN_ERR "%s: Cannot find firmware: %s\n", - dev->name, fw->pri_fw); - return -ENOENT; - } + if (!priv->cached_pri_fw) { + if (request_firmware(&fw_entry, fw->pri_fw, priv->dev) != 0) { + printk(KERN_ERR "%s: Cannot find firmware: %s\n", + dev->name, fw->pri_fw); + return -ENOENT; + } + } else + fw_entry = priv->cached_pri_fw; /* Load primary firmware */ ret = symbol_dl_image(priv, fw, fw_entry->data, fw_entry->data + fw_entry->size, 0); - release_firmware(fw_entry); + + if (!priv->cached_pri_fw) + release_firmware(fw_entry); if (ret) { printk(KERN_ERR "%s: Primary firmware download failed\n", dev->name); return ret; } - if (request_firmware(&fw_entry, fw->sta_fw, - priv->dev) != 0) { - printk(KERN_ERR "%s: Cannot find firmware: %s\n", - dev->name, fw->sta_fw); - return -ENOENT; - } + if (!priv->cached_fw) { + if (request_firmware(&fw_entry, fw->sta_fw, priv->dev) != 0) { + printk(KERN_ERR "%s: Cannot find firmware: %s\n", + dev->name, fw->sta_fw); + return -ENOENT; + } + } else + fw_entry = priv->cached_fw; /* Load secondary firmware */ ret = symbol_dl_image(priv, fw, fw_entry->data, fw_entry->data + fw_entry->size, 1); - release_firmware(fw_entry); + if (!priv->cached_fw) + release_firmware(fw_entry); if (ret) { printk(KERN_ERR "%s: Secondary firmware download failed\n", dev->name); @@ -708,13 +715,20 @@ static int orinoco_download(struct orinoco_private *priv) static void orinoco_cache_fw(struct orinoco_private *priv, int ap) { const struct firmware *fw_entry = NULL; + const char *pri_fw; const char *fw; + pri_fw = orinoco_fw[priv->firmware_type].pri_fw; if (ap) fw = orinoco_fw[priv->firmware_type].ap_fw; else fw = orinoco_fw[priv->firmware_type].sta_fw; + if (pri_fw) { + if (request_firmware(&fw_entry, pri_fw, priv->dev) == 0) + priv->cached_pri_fw = fw_entry; + } + if (fw) { if (request_firmware(&fw_entry, fw, priv->dev) == 0) priv->cached_fw = fw_entry; @@ -723,9 +737,12 @@ static void orinoco_cache_fw(struct orinoco_private *priv, int ap) static void orinoco_uncache_fw(struct orinoco_private *priv) { + if (priv->cached_pri_fw) + release_firmware(priv->cached_pri_fw); if (priv->cached_fw) release_firmware(priv->cached_fw); + priv->cached_pri_fw = NULL; priv->cached_fw = NULL; } @@ -3563,6 +3580,7 @@ struct net_device netif_carrier_off(dev); priv->last_linkstatus = 0xffff; + priv->cached_pri_fw = NULL; priv->cached_fw = NULL; return dev; diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h index 8c2953834923..f6eaea98db53 100644 --- a/drivers/net/wireless/orinoco/orinoco.h +++ b/drivers/net/wireless/orinoco/orinoco.h @@ -167,7 +167,8 @@ struct orinoco_private { unsigned int tkip_cm_active:1; unsigned int key_mgmt:3; - /* Cached in memory firmware to use in ->resume */ + /* Cached in memory firmware to use during ->resume. */ + const struct firmware *cached_pri_fw; const struct firmware *cached_fw; }; -- cgit v1.2.2 From ac7cafd72261857278dff9f737e600b30088653b Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sat, 22 Nov 2008 10:37:27 +0000 Subject: orinoco: Resume spectrum_cs in the same way as orinoco_cs Retrieval of external firmware has been resolved, and should work with the standard orinoco resume algorithm. This fixes an issue where priv->hw_unavailable indicates the card is ready when firmware has not been loaded. Signed-off by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/spectrum_cs.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 0bae3dcf9d50..a2764764c1c0 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -450,10 +450,29 @@ spectrum_cs_resume(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct orinoco_private *priv = netdev_priv(dev); + unsigned long flags; + int err; + + err = orinoco_reinit_firmware(dev); + if (err) { + printk(KERN_ERR "%s: Error %d re-initializing firmware\n", + dev->name, err); + return -EIO; + } + + spin_lock_irqsave(&priv->lock, flags); netif_device_attach(dev); priv->hw_unavailable--; - schedule_work(&priv->reset_work); + + if (priv->open && !priv->hw_unavailable) { + err = __orinoco_up(dev); + if (err) + printk(KERN_ERR "%s: Error %d restarting card\n", + dev->name, err); + } + + spin_unlock_irqrestore(&priv->lock, flags); return 0; } -- cgit v1.2.2 From 39d1ffee57c7ce02c90ec8e9272df8aa8ddf600f Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sat, 22 Nov 2008 10:37:28 +0000 Subject: orinoco: Provide option to avoid unnecessary fw caching Make firmware caching on startup optional, and make it default. When the option is not selected and PM_SLEEP is configured, then cache firmware in the suspend pm_notifier. This configuration saves about 64k RAM in normal use, but can lead to a situation where the driver is configured to use a different firmware. Signed-off by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 15 +++++++++ drivers/net/wireless/orinoco/orinoco.c | 57 ++++++++++++++++++++++++++++++++++ drivers/net/wireless/orinoco/orinoco.h | 3 ++ 3 files changed, 75 insertions(+) diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 7ea916b257e4..ea543fcf2687 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -214,6 +214,21 @@ config HERMES configure your card and that /etc/pcmcia/wireless.opts works : +config HERMES_CACHE_FW_ON_INIT + bool "Cache Hermes firmware on driver initialisation" + depends on HERMES + default y + ---help--- + Say Y to cache any firmware required by the Hermes drivers + on startup. The firmware will remain cached until the + driver is unloaded. The cache uses 64K of RAM. + + Otherwise load the firmware from userspace as required. In + this case the driver should be unloaded and restarted + whenever the firmware is changed. + + If you are not sure, say Y. + config APPLE_AIRPORT tristate "Apple Airport support (built-in)" depends on PPC_PMAC && HERMES diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c index 09eec7f620bc..171bfa03868e 100644 --- a/drivers/net/wireless/orinoco/orinoco.c +++ b/drivers/net/wireless/orinoco/orinoco.c @@ -84,6 +84,7 @@ #include #include #include +#include #include #include #include @@ -712,6 +713,7 @@ static int orinoco_download(struct orinoco_private *priv) return err; } +#if defined(CONFIG_HERMES_CACHE_FW_ON_INIT) || defined(CONFIG_PM_SLEEP) static void orinoco_cache_fw(struct orinoco_private *priv, int ap) { const struct firmware *fw_entry = NULL; @@ -745,6 +747,10 @@ static void orinoco_uncache_fw(struct orinoco_private *priv) priv->cached_pri_fw = NULL; priv->cached_fw = NULL; } +#else +#define orinoco_cache_fw(priv, ap) +#define orinoco_uncache_fw(priv) +#endif /********************************************************************/ /* Device methods */ @@ -3099,6 +3105,50 @@ irqreturn_t orinoco_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +/********************************************************************/ +/* Power management */ +/********************************************************************/ +#if defined(CONFIG_PM_SLEEP) && !defined(CONFIG_HERMES_CACHE_FW_ON_INIT) +static int orinoco_pm_notifier(struct notifier_block *notifier, + unsigned long pm_event, + void *unused) +{ + struct orinoco_private *priv = container_of(notifier, + struct orinoco_private, + pm_notifier); + + /* All we need to do is cache the firmware before suspend, and + * release it when we come out. + * + * Only need to do this if we're downloading firmware. */ + if (!priv->do_fw_download) + return NOTIFY_DONE; + + switch (pm_event) { + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + orinoco_cache_fw(priv, 0); + break; + + case PM_POST_RESTORE: + /* Restore from hibernation failed. We need to clean + * up in exactly the same way, so fall through. */ + case PM_POST_HIBERNATION: + case PM_POST_SUSPEND: + orinoco_uncache_fw(priv); + break; + + case PM_RESTORE_PREPARE: + default: + break; + } + + return NOTIFY_DONE; +} +#else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */ +#define orinoco_pm_notifier NULL +#endif + /********************************************************************/ /* Initialization */ /********************************************************************/ @@ -3342,7 +3392,9 @@ static int orinoco_init(struct net_device *dev) } if (priv->do_fw_download) { +#ifdef CONFIG_HERMES_CACHE_FW_ON_INIT orinoco_cache_fw(priv, 0); +#endif err = orinoco_download(priv); if (err) @@ -3583,6 +3635,10 @@ struct net_device priv->cached_pri_fw = NULL; priv->cached_fw = NULL; + /* Register PM notifiers */ + priv->pm_notifier.notifier_call = orinoco_pm_notifier; + register_pm_notifier(&priv->pm_notifier); + return dev; } @@ -3595,6 +3651,7 @@ void free_orinocodev(struct net_device *dev) * emptying the list */ tasklet_kill(&priv->rx_tasklet); + unregister_pm_notifier(&priv->pm_notifier); orinoco_uncache_fw(priv); priv->wpa_ie_len = 0; diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h index f6eaea98db53..00750c8ba7db 100644 --- a/drivers/net/wireless/orinoco/orinoco.h +++ b/drivers/net/wireless/orinoco/orinoco.h @@ -10,6 +10,7 @@ #define DRIVER_VERSION "0.15" #include +#include #include #include #include @@ -170,6 +171,8 @@ struct orinoco_private { /* Cached in memory firmware to use during ->resume. */ const struct firmware *cached_pri_fw; const struct firmware *cached_fw; + + struct notifier_block pm_notifier; }; #ifdef ORINOCO_DEBUG -- cgit v1.2.2 From bf8c1ac6d81ba8c0e4dc2215f84f5e2a3c8227e8 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sat, 22 Nov 2008 22:00:31 +0200 Subject: nl80211: Change max TX power to be in mBm instead of dBm In order to be consistent with NL80211_ATTR_POWER_RULE_MAX_EIRP, change NL80211_FREQUENCY_ATTR_MAX_TX_POWER to use mBm and U32 instead of dBm and U8. This is a userspace interface change, but the previous version had not yet been pushed upstream and there are no userspace programs using this yet, so there is justification to get this change in as long as it goes in before the previous version gets out. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 3 ++- net/wireless/nl80211.c | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 54d6ebe38e39..e08c8bcfb78d 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -508,7 +508,8 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory * on this channel in current regulatory domain. - * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in dBm. + * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm + * (100 * dBm). */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 2e8464eaaaa2..c9141e3df9ba 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -198,8 +198,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, if (chan->flags & IEEE80211_CHAN_RADAR) NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_RADAR); - NLA_PUT_U8(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, - chan->max_power); + NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + DBM_TO_MBM(chan->max_power)); nla_nest_end(msg, nl_freq); } -- cgit v1.2.2 From ff37e337beb838d4c2540fa93b2c4c632ee17750 Mon Sep 17 00:00:00 2001 From: Sujith Date: Mon, 24 Nov 2008 12:07:55 +0530 Subject: ath9k: Code scrub Merge core.c and base.c Remove Antenna Diversity (unused now). Remove unused chainmask handling code. Comment, indentation scrub. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/Makefile | 3 +- drivers/net/wireless/ath9k/beacon.c | 80 +- drivers/net/wireless/ath9k/core.c | 1610 ----------------------------------- drivers/net/wireless/ath9k/core.h | 155 +--- drivers/net/wireless/ath9k/main.c | 1195 +++++++++++++++++++++++++- drivers/net/wireless/ath9k/rc.c | 9 +- drivers/net/wireless/ath9k/recv.c | 22 + drivers/net/wireless/ath9k/xmit.c | 22 +- 8 files changed, 1231 insertions(+), 1865 deletions(-) delete mode 100644 drivers/net/wireless/ath9k/core.c diff --git a/drivers/net/wireless/ath9k/Makefile b/drivers/net/wireless/ath9k/Makefile index c58cfdeb49c9..c741e8d34748 100644 --- a/drivers/net/wireless/ath9k/Makefile +++ b/drivers/net/wireless/ath9k/Makefile @@ -9,7 +9,6 @@ ath9k-y += hw.o \ main.o \ recv.o \ xmit.o \ - rc.o \ - core.o + rc.o obj-$(CONFIG_ATH9K) += ath9k.o diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index dcf23834194c..377d2df05316 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -14,13 +14,9 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ - /* Implementation of beacon processing. */ - #include "core.h" /* - * Configure parameters for the beacon queue - * * This function will modify certain transmit queue properties depending on * the operating mode of the station (AP or AdHoc). Parameters are AIFS * settings and channel width min/max @@ -54,9 +50,15 @@ static int ath_beaconq_config(struct ath_softc *sc) } } +static void ath_bstuck_process(struct ath_softc *sc) +{ + DPRINTF(sc, ATH_DBG_BEACON, + "%s: stuck beacon; resetting (bmiss count %u)\n", + __func__, sc->sc_bmisscount); + ath_reset(sc, false); +} + /* - * Setup the beacon frame for transmit. - * * Associates the beacon frame buffer with a transmit descriptor. Will set * up all required antenna switch parameters, rate codes, and channel flags. * Beacons are always sent out at the lowest rate, and are not retried. @@ -138,14 +140,7 @@ static void ath_beacon_setup(struct ath_softc *sc, ctsrate, ctsduration, series, 4, 0); } -/* - * Generate beacon frame and queue cab data for a vap. - * - * Updates the contents of the beacon frame. It is assumed that the buffer for - * the beacon frame has been allocated in the ATH object, and simply needs to - * be filled for this cycle. Also, any CAB (crap after beacon?) traffic will - * be added to the beacon frame at this point. -*/ +/* Generate beacon frame and queue cab data for a vap */ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) { struct ath_buf *bf; @@ -275,14 +270,6 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id) sc->sc_bhalq, ito64(bf->bf_daddr), bf->bf_desc); } -/* - * Setup a h/w transmit queue for beacons. - * - * This function allocates an information structure (struct ath9k_txq_info) - * on the stack, sets some specific parameters (zero out channel width - * min/max, and enable aifs). The info structure does not need to be - * persistant. -*/ int ath_beaconq_setup(struct ath_hal *ah) { struct ath9k_tx_queue_info qi; @@ -295,14 +282,6 @@ int ath_beaconq_setup(struct ath_hal *ah) return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi); } - -/* - * Allocate and setup an initial beacon frame. - * - * Allocate a beacon state variable for a specific VAP instance created on - * the ATH interface. This routine also calculates the beacon "slot" for - * staggared beacons in the mBSSID case. -*/ int ath_beacon_alloc(struct ath_softc *sc, int if_id) { struct ieee80211_vif *vif; @@ -321,7 +300,6 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) if (!avp->av_bcbuf) { /* Allocate beacon state for hostap/ibss. We know * a buffer is available. */ - avp->av_bcbuf = list_first_entry(&sc->sc_bbuf, struct ath_buf, list); list_del(&avp->av_bcbuf->list); @@ -427,12 +405,6 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) return 0; } -/* - * Reclaim beacon resources and return buffer to the pool. - * - * Checks the VAP to put the beacon frame buffer back to the ATH object - * queue, and de-allocates any skbs that were sent as CAB traffic. -*/ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) { if (avp->av_bcbuf != NULL) { @@ -458,13 +430,6 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) } } -/* - * Tasklet for Sending Beacons - * - * Transmit one or more beacon frames at SWBA. Dynamic updates to the frame - * contents are done as needed and the slot time is also adjusted based on - * current state. -*/ void ath9k_beacon_tasklet(unsigned long data) { struct ath_softc *sc = (struct ath_softc *)data; @@ -481,9 +446,7 @@ void ath9k_beacon_tasklet(unsigned long data) if (sc->sc_flags & SC_OP_NO_RESET) { show_cycles = ath9k_hw_GetMibCycleCountsPct(ah, - &rx_clear, - &rx_frame, - &tx_frame); + &rx_clear, &rx_frame, &tx_frame); } /* @@ -605,9 +568,10 @@ void ath9k_beacon_tasklet(unsigned long data) if (sc->sc_updateslot == UPDATE) { sc->sc_updateslot = COMMIT; /* commit next beacon */ sc->sc_slotupdate = slot; - } else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot) - ath_setslottime(sc); /* commit change to hardware */ - + } else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot) { + ath9k_hw_setslottime(sc->sc_ah, sc->sc_slottime); + sc->sc_updateslot = OK; + } if (bfaddr != 0) { /* * Stop any current dma and put the new frame(s) on the queue. @@ -629,20 +593,6 @@ void ath9k_beacon_tasklet(unsigned long data) } } -/* - * Tasklet for Beacon Stuck processing - * - * Processing for Beacon Stuck. - * Basically resets the chip. -*/ -void ath_bstuck_process(struct ath_softc *sc) -{ - DPRINTF(sc, ATH_DBG_BEACON, - "%s: stuck beacon; resetting (bmiss count %u)\n", - __func__, sc->sc_bmisscount); - ath_reset(sc, false); -} - /* * Configure the beacon and sleep timers. * @@ -886,8 +836,6 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) } } -/* Function to collect beacon rssi data and resync beacon if necessary */ - void ath_beacon_sync(struct ath_softc *sc, int if_id) { /* diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c deleted file mode 100644 index fb6a013f3f31..000000000000 --- a/drivers/net/wireless/ath9k/core.c +++ /dev/null @@ -1,1610 +0,0 @@ -/* - * Copyright (c) 2008, Atheros Communications Inc. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include "core.h" -#include "regd.h" - -static u32 ath_chainmask_sel_up_rssi_thres = - ATH_CHAINMASK_SEL_UP_RSSI_THRES; -static u32 ath_chainmask_sel_down_rssi_thres = - ATH_CHAINMASK_SEL_DOWN_RSSI_THRES; -static u32 ath_chainmask_sel_period = - ATH_CHAINMASK_SEL_TIMEOUT; - -/* return bus cachesize in 4B word units */ - -static void bus_read_cachesize(struct ath_softc *sc, int *csz) -{ - u8 u8tmp; - - pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp); - *csz = (int)u8tmp; - - /* - * This check was put in to avoid "unplesant" consequences if - * the bootrom has not fully initialized all PCI devices. - * Sometimes the cache line size register is not set - */ - - if (*csz == 0) - *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */ -} - -static u8 parse_mpdudensity(u8 mpdudensity) -{ - /* - * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": - * 0 for no restriction - * 1 for 1/4 us - * 2 for 1/2 us - * 3 for 1 us - * 4 for 2 us - * 5 for 4 us - * 6 for 8 us - * 7 for 16 us - */ - switch (mpdudensity) { - case 0: - return 0; - case 1: - case 2: - case 3: - /* Our lower layer calculations limit our precision to - 1 microsecond */ - return 1; - case 4: - return 2; - case 5: - return 4; - case 6: - return 8; - case 7: - return 16; - default: - return 0; - } -} - -/* - * Set current operating mode -*/ -static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) -{ - sc->sc_curmode = mode; - /* - * All protection frames are transmited at 2Mb/s for - * 11g, otherwise at 1Mb/s. - * XXX select protection rate index from rate table. - */ - sc->sc_protrix = (mode == ATH9K_MODE_11G ? 1 : 0); -} - -/* - * Set up rate table (legacy rates) - */ -static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band) -{ - struct ath_rate_table *rate_table = NULL; - struct ieee80211_supported_band *sband; - struct ieee80211_rate *rate; - int i, maxrates; - - switch (band) { - case IEEE80211_BAND_2GHZ: - rate_table = sc->hw_rate_table[ATH9K_MODE_11G]; - break; - case IEEE80211_BAND_5GHZ: - rate_table = sc->hw_rate_table[ATH9K_MODE_11A]; - break; - default: - break; - } - - if (rate_table == NULL) - return; - - sband = &sc->sbands[band]; - rate = sc->rates[band]; - - if (rate_table->rate_cnt > ATH_RATE_MAX) - maxrates = ATH_RATE_MAX; - else - maxrates = rate_table->rate_cnt; - - for (i = 0; i < maxrates; i++) { - rate[i].bitrate = rate_table->info[i].ratekbps / 100; - rate[i].hw_value = rate_table->info[i].ratecode; - sband->n_bitrates++; - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: Rate: %2dMbps, ratecode: %2d\n", - __func__, - rate[i].bitrate / 10, - rate[i].hw_value); - } -} - -/* - * Set up channel list - */ -static int ath_setup_channels(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - int nchan, i, a = 0, b = 0; - u8 regclassids[ATH_REGCLASSIDS_MAX]; - u32 nregclass = 0; - struct ieee80211_supported_band *band_2ghz; - struct ieee80211_supported_band *band_5ghz; - struct ieee80211_channel *chan_2ghz; - struct ieee80211_channel *chan_5ghz; - struct ath9k_channel *c; - - /* Fill in ah->ah_channels */ - if (!ath9k_regd_init_channels(ah, ATH_CHAN_MAX, (u32 *)&nchan, - regclassids, ATH_REGCLASSIDS_MAX, - &nregclass, CTRY_DEFAULT, false, 1)) { - u32 rd = ah->ah_currentRD; - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to collect channel list; " - "regdomain likely %u country code %u\n", - __func__, rd, CTRY_DEFAULT); - return -EINVAL; - } - - band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ]; - band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ]; - chan_2ghz = sc->channels[IEEE80211_BAND_2GHZ]; - chan_5ghz = sc->channels[IEEE80211_BAND_5GHZ]; - - for (i = 0; i < nchan; i++) { - c = &ah->ah_channels[i]; - if (IS_CHAN_2GHZ(c)) { - chan_2ghz[a].band = IEEE80211_BAND_2GHZ; - chan_2ghz[a].center_freq = c->channel; - chan_2ghz[a].max_power = c->maxTxPower; - - if (c->privFlags & CHANNEL_DISALLOW_ADHOC) - chan_2ghz[a].flags |= IEEE80211_CHAN_NO_IBSS; - if (c->channelFlags & CHANNEL_PASSIVE) - chan_2ghz[a].flags |= IEEE80211_CHAN_PASSIVE_SCAN; - - band_2ghz->n_channels = ++a; - - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: 2MHz channel: %d, " - "channelFlags: 0x%x\n", - __func__, c->channel, c->channelFlags); - } else if (IS_CHAN_5GHZ(c)) { - chan_5ghz[b].band = IEEE80211_BAND_5GHZ; - chan_5ghz[b].center_freq = c->channel; - chan_5ghz[b].max_power = c->maxTxPower; - - if (c->privFlags & CHANNEL_DISALLOW_ADHOC) - chan_5ghz[b].flags |= IEEE80211_CHAN_NO_IBSS; - if (c->channelFlags & CHANNEL_PASSIVE) - chan_5ghz[b].flags |= IEEE80211_CHAN_PASSIVE_SCAN; - - band_5ghz->n_channels = ++b; - - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: 5MHz channel: %d, " - "channelFlags: 0x%x\n", - __func__, c->channel, c->channelFlags); - } - } - - return 0; -} - -/* - * Determine mode from channel flags - * - * This routine will provide the enumerated WIRELESSS_MODE value based - * on the settings of the channel flags. If no valid set of flags - * exist, the lowest mode (11b) is selected. -*/ - -static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan) -{ - if (chan->chanmode == CHANNEL_A) - return ATH9K_MODE_11A; - else if (chan->chanmode == CHANNEL_G) - return ATH9K_MODE_11G; - else if (chan->chanmode == CHANNEL_B) - return ATH9K_MODE_11B; - else if (chan->chanmode == CHANNEL_A_HT20) - return ATH9K_MODE_11NA_HT20; - else if (chan->chanmode == CHANNEL_G_HT20) - return ATH9K_MODE_11NG_HT20; - else if (chan->chanmode == CHANNEL_A_HT40PLUS) - return ATH9K_MODE_11NA_HT40PLUS; - else if (chan->chanmode == CHANNEL_A_HT40MINUS) - return ATH9K_MODE_11NA_HT40MINUS; - else if (chan->chanmode == CHANNEL_G_HT40PLUS) - return ATH9K_MODE_11NG_HT40PLUS; - else if (chan->chanmode == CHANNEL_G_HT40MINUS) - return ATH9K_MODE_11NG_HT40MINUS; - - WARN_ON(1); /* should not get here */ - - return ATH9K_MODE_11B; -} - -/* - * Set the current channel - * - * Set/change channels. If the channel is really being changed, it's done - * by reseting the chip. To accomplish this we must first cleanup any pending - * DMA, then restart stuff after a la ath_init. -*/ -int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) -{ - struct ath_hal *ah = sc->sc_ah; - bool fastcc = true, stopped; - - if (sc->sc_flags & SC_OP_INVALID) /* the device is invalid or removed */ - return -EIO; - - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n", - __func__, - ath9k_hw_mhz2ieee(ah, sc->sc_ah->ah_curchan->channel, - sc->sc_ah->ah_curchan->channelFlags), - sc->sc_ah->ah_curchan->channel, - ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags), - hchan->channel, hchan->channelFlags); - - if (hchan->channel != sc->sc_ah->ah_curchan->channel || - hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags || - (sc->sc_flags & SC_OP_CHAINMASK_UPDATE) || - (sc->sc_flags & SC_OP_FULL_RESET)) { - int status; - /* - * This is only performed if the channel settings have - * actually changed. - * - * To switch channels clear any pending DMA operations; - * wait long enough for the RX fifo to drain, reset the - * hardware at the new frequency, and then re-enable - * the relevant bits of the h/w. - */ - ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */ - ath_draintxq(sc, false); /* clear pending tx frames */ - stopped = ath_stoprecv(sc); /* turn off frame recv */ - - /* XXX: do not flush receive queue here. We don't want - * to flush data frames already in queue because of - * changing channel. */ - - if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET)) - fastcc = false; - - spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, hchan, - sc->sc_ht_info.tx_chan_width, - sc->sc_tx_chainmask, - sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, - fastcc, &status)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to reset channel %u (%uMhz) " - "flags 0x%x hal status %u\n", __func__, - ath9k_hw_mhz2ieee(ah, hchan->channel, - hchan->channelFlags), - hchan->channel, hchan->channelFlags, status); - spin_unlock_bh(&sc->sc_resetlock); - return -EIO; - } - spin_unlock_bh(&sc->sc_resetlock); - - sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE; - sc->sc_flags &= ~SC_OP_FULL_RESET; - - /* Re-enable rx framework */ - if (ath_startrecv(sc) != 0) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to restart recv logic\n", __func__); - return -EIO; - } - /* - * Change channels and update the h/w rate map - * if we're switching; e.g. 11a to 11b/g. - */ - ath_setcurmode(sc, ath_chan2mode(hchan)); - - ath_update_txpow(sc); /* update tx power state */ - /* - * Re-enable interrupts. - */ - ath9k_hw_set_interrupts(ah, sc->sc_imask); - } - return 0; -} - -/**********************/ -/* Chainmask Handling */ -/**********************/ - -static void ath_chainmask_sel_timertimeout(unsigned long data) -{ - struct ath_chainmask_sel *cm = (struct ath_chainmask_sel *)data; - cm->switch_allowed = 1; -} - -/* Start chainmask select timer */ -static void ath_chainmask_sel_timerstart(struct ath_chainmask_sel *cm) -{ - cm->switch_allowed = 0; - mod_timer(&cm->timer, ath_chainmask_sel_period); -} - -/* Stop chainmask select timer */ -static void ath_chainmask_sel_timerstop(struct ath_chainmask_sel *cm) -{ - cm->switch_allowed = 0; - del_timer_sync(&cm->timer); -} - -static void ath_chainmask_sel_init(struct ath_softc *sc, struct ath_node *an) -{ - struct ath_chainmask_sel *cm = &an->an_chainmask_sel; - - memset(cm, 0, sizeof(struct ath_chainmask_sel)); - - cm->cur_tx_mask = sc->sc_tx_chainmask; - cm->cur_rx_mask = sc->sc_rx_chainmask; - cm->tx_avgrssi = ATH_RSSI_DUMMY_MARKER; - setup_timer(&cm->timer, - ath_chainmask_sel_timertimeout, (unsigned long) cm); -} - -int ath_chainmask_sel_logic(struct ath_softc *sc, struct ath_node *an) -{ - struct ath_chainmask_sel *cm = &an->an_chainmask_sel; - - /* - * Disable auto-swtiching in one of the following if conditions. - * sc_chainmask_auto_sel is used for internal global auto-switching - * enabled/disabled setting - */ - if (sc->sc_ah->ah_caps.tx_chainmask != ATH_CHAINMASK_SEL_3X3) { - cm->cur_tx_mask = sc->sc_tx_chainmask; - return cm->cur_tx_mask; - } - - if (cm->tx_avgrssi == ATH_RSSI_DUMMY_MARKER) - return cm->cur_tx_mask; - - if (cm->switch_allowed) { - /* Switch down from tx 3 to tx 2. */ - if (cm->cur_tx_mask == ATH_CHAINMASK_SEL_3X3 && - ATH_RSSI_OUT(cm->tx_avgrssi) >= - ath_chainmask_sel_down_rssi_thres) { - cm->cur_tx_mask = sc->sc_tx_chainmask; - - /* Don't let another switch happen until - * this timer expires */ - ath_chainmask_sel_timerstart(cm); - } - /* Switch up from tx 2 to 3. */ - else if (cm->cur_tx_mask == sc->sc_tx_chainmask && - ATH_RSSI_OUT(cm->tx_avgrssi) <= - ath_chainmask_sel_up_rssi_thres) { - cm->cur_tx_mask = ATH_CHAINMASK_SEL_3X3; - - /* Don't let another switch happen - * until this timer expires */ - ath_chainmask_sel_timerstart(cm); - } - } - - return cm->cur_tx_mask; -} - -/* - * Update tx/rx chainmask. For legacy association, - * hard code chainmask to 1x1, for 11n association, use - * the chainmask configuration. - */ - -void ath_update_chainmask(struct ath_softc *sc, int is_ht) -{ - sc->sc_flags |= SC_OP_CHAINMASK_UPDATE; - if (is_ht) { - sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask; - sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask; - } else { - sc->sc_tx_chainmask = 1; - sc->sc_rx_chainmask = 1; - } - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: tx chmask: %d, rx chmask: %d\n", - __func__, sc->sc_tx_chainmask, sc->sc_rx_chainmask); -} - -/*******/ -/* ANI */ -/*******/ - -/* - * This routine performs the periodic noise floor calibration function - * that is used to adjust and optimize the chip performance. This - * takes environmental changes (location, temperature) into account. - * When the task is complete, it reschedules itself depending on the - * appropriate interval that was calculated. - */ - -static void ath_ani_calibrate(unsigned long data) -{ - struct ath_softc *sc; - struct ath_hal *ah; - bool longcal = false; - bool shortcal = false; - bool aniflag = false; - unsigned int timestamp = jiffies_to_msecs(jiffies); - u32 cal_interval; - - sc = (struct ath_softc *)data; - ah = sc->sc_ah; - - /* - * don't calibrate when we're scanning. - * we are most likely not on our home channel. - */ - if (sc->rx_filter & FIF_BCN_PRBRESP_PROMISC) - return; - - /* Long calibration runs independently of short calibration. */ - if ((timestamp - sc->sc_ani.sc_longcal_timer) >= ATH_LONG_CALINTERVAL) { - longcal = true; - DPRINTF(sc, ATH_DBG_ANI, "%s: longcal @%lu\n", - __func__, jiffies); - sc->sc_ani.sc_longcal_timer = timestamp; - } - - /* Short calibration applies only while sc_caldone is false */ - if (!sc->sc_ani.sc_caldone) { - if ((timestamp - sc->sc_ani.sc_shortcal_timer) >= - ATH_SHORT_CALINTERVAL) { - shortcal = true; - DPRINTF(sc, ATH_DBG_ANI, "%s: shortcal @%lu\n", - __func__, jiffies); - sc->sc_ani.sc_shortcal_timer = timestamp; - sc->sc_ani.sc_resetcal_timer = timestamp; - } - } else { - if ((timestamp - sc->sc_ani.sc_resetcal_timer) >= - ATH_RESTART_CALINTERVAL) { - ath9k_hw_reset_calvalid(ah, ah->ah_curchan, - &sc->sc_ani.sc_caldone); - if (sc->sc_ani.sc_caldone) - sc->sc_ani.sc_resetcal_timer = timestamp; - } - } - - /* Verify whether we must check ANI */ - if ((timestamp - sc->sc_ani.sc_checkani_timer) >= - ATH_ANI_POLLINTERVAL) { - aniflag = true; - sc->sc_ani.sc_checkani_timer = timestamp; - } - - /* Skip all processing if there's nothing to do. */ - if (longcal || shortcal || aniflag) { - /* Call ANI routine if necessary */ - if (aniflag) - ath9k_hw_ani_monitor(ah, &sc->sc_halstats, - ah->ah_curchan); - - /* Perform calibration if necessary */ - if (longcal || shortcal) { - bool iscaldone = false; - - if (ath9k_hw_calibrate(ah, ah->ah_curchan, - sc->sc_rx_chainmask, longcal, - &iscaldone)) { - if (longcal) - sc->sc_ani.sc_noise_floor = - ath9k_hw_getchan_noise(ah, - ah->ah_curchan); - - DPRINTF(sc, ATH_DBG_ANI, - "%s: calibrate chan %u/%x nf: %d\n", - __func__, - ah->ah_curchan->channel, - ah->ah_curchan->channelFlags, - sc->sc_ani.sc_noise_floor); - } else { - DPRINTF(sc, ATH_DBG_ANY, - "%s: calibrate chan %u/%x failed\n", - __func__, - ah->ah_curchan->channel, - ah->ah_curchan->channelFlags); - } - sc->sc_ani.sc_caldone = iscaldone; - } - } - - /* - * Set timer interval based on previous results. - * The interval must be the shortest necessary to satisfy ANI, - * short calibration and long calibration. - */ - - cal_interval = ATH_ANI_POLLINTERVAL; - if (!sc->sc_ani.sc_caldone) - cal_interval = min(cal_interval, (u32)ATH_SHORT_CALINTERVAL); - - mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(cal_interval)); -} - -/********/ -/* Core */ -/********/ - -int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) -{ - struct ath_hal *ah = sc->sc_ah; - int status; - int error = 0; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: mode %d\n", - __func__, sc->sc_ah->ah_opmode); - - /* Reset SERDES registers */ - ath9k_hw_configpcipowersave(ah, 0); - - /* - * The basic interface to setting the hardware in a good - * state is ``reset''. On return the hardware is known to - * be powered up and with interrupts disabled. This must - * be followed by initialization of the appropriate bits - * and then setup of the interrupt mask. - */ - - spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, initial_chan, - sc->sc_ht_info.tx_chan_width, - sc->sc_tx_chainmask, sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, false, &status)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to reset hardware; hal status %u " - "(freq %u flags 0x%x)\n", __func__, status, - initial_chan->channel, initial_chan->channelFlags); - error = -EIO; - spin_unlock_bh(&sc->sc_resetlock); - goto done; - } - spin_unlock_bh(&sc->sc_resetlock); - - /* - * This is needed only to setup initial state - * but it's best done after a reset. - */ - ath_update_txpow(sc); - - /* - * Setup the hardware after reset: - * The receive engine is set going. - * Frame transmit is handled entirely - * in the frame output path; there's nothing to do - * here except setup the interrupt mask. - */ - if (ath_startrecv(sc) != 0) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to start recv logic\n", __func__); - error = -EIO; - goto done; - } - - /* Setup our intr mask. */ - sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX - | ATH9K_INT_RXEOL | ATH9K_INT_RXORN - | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL; - - if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT) - sc->sc_imask |= ATH9K_INT_GTT; - - if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) - sc->sc_imask |= ATH9K_INT_CST; - - /* - * Enable MIB interrupts when there are hardware phy counters. - * Note we only do this (at the moment) for station mode. - */ - if (ath9k_hw_phycounters(ah) && - ((sc->sc_ah->ah_opmode == ATH9K_M_STA) || - (sc->sc_ah->ah_opmode == ATH9K_M_IBSS))) - sc->sc_imask |= ATH9K_INT_MIB; - /* - * Some hardware processes the TIM IE and fires an - * interrupt when the TIM bit is set. For hardware - * that does, if not overridden by configuration, - * enable the TIM interrupt when operating as station. - */ - if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) && - (sc->sc_ah->ah_opmode == ATH9K_M_STA) && - !sc->sc_config.swBeaconProcess) - sc->sc_imask |= ATH9K_INT_TIM; - - ath_setcurmode(sc, ath_chan2mode(initial_chan)); - - sc->sc_flags &= ~SC_OP_INVALID; - - /* Disable BMISS interrupt when we're not associated */ - sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); - ath9k_hw_set_interrupts(sc->sc_ah,sc->sc_imask); - - ieee80211_wake_queues(sc->hw); -done: - return error; -} - -void ath_stop(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Cleaning up\n", __func__); - - ieee80211_stop_queues(sc->hw); - - /* make sure h/w will not generate any interrupt - * before setting the invalid flag. */ - ath9k_hw_set_interrupts(ah, 0); - - if (!(sc->sc_flags & SC_OP_INVALID)) { - ath_draintxq(sc, false); - ath_stoprecv(sc); - ath9k_hw_phy_disable(ah); - } else - sc->sc_rxlink = NULL; - -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); -#endif - /* disable HAL and put h/w to sleep */ - ath9k_hw_disable(sc->sc_ah); - ath9k_hw_configpcipowersave(sc->sc_ah, 1); - - sc->sc_flags |= SC_OP_INVALID; -} - -int ath_reset(struct ath_softc *sc, bool retry_tx) -{ - struct ath_hal *ah = sc->sc_ah; - int status; - int error = 0; - - ath9k_hw_set_interrupts(ah, 0); - ath_draintxq(sc, retry_tx); - ath_stoprecv(sc); - ath_flushrecv(sc); - - /* Reset chip */ - spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan, - sc->sc_ht_info.tx_chan_width, - sc->sc_tx_chainmask, sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, false, &status)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to reset hardware; hal status %u\n", - __func__, status); - error = -EIO; - } - spin_unlock_bh(&sc->sc_resetlock); - - if (ath_startrecv(sc) != 0) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to start recv logic\n", __func__); - - /* - * We may be doing a reset in response to a request - * that changes the channel so update any state that - * might change as a result. - */ - ath_setcurmode(sc, ath_chan2mode(sc->sc_ah->ah_curchan)); - - ath_update_txpow(sc); - - if (sc->sc_flags & SC_OP_BEACONS) - ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */ - - ath9k_hw_set_interrupts(ah, sc->sc_imask); - - /* Restart the txq */ - if (retry_tx) { - int i; - for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { - if (ATH_TXQ_SETUP(sc, i)) { - spin_lock_bh(&sc->sc_txq[i].axq_lock); - ath_txq_schedule(sc, &sc->sc_txq[i]); - spin_unlock_bh(&sc->sc_txq[i].axq_lock); - } - } - } - - return error; -} - -/* Interrupt handler. Most of the actual processing is deferred. - * It's the caller's responsibility to ensure the chip is awake. */ - -irqreturn_t ath_isr(int irq, void *dev) -{ - struct ath_softc *sc = dev; - struct ath_hal *ah = sc->sc_ah; - enum ath9k_int status; - bool sched = false; - - do { - if (sc->sc_flags & SC_OP_INVALID) { - /* - * The hardware is not ready/present, don't - * touch anything. Note this can happen early - * on if the IRQ is shared. - */ - return IRQ_NONE; - } - if (!ath9k_hw_intrpend(ah)) { /* shared irq, not for us */ - return IRQ_NONE; - } - - /* - * Figure out the reason(s) for the interrupt. Note - * that the hal returns a pseudo-ISR that may include - * bits we haven't explicitly enabled so we mask the - * value to insure we only process bits we requested. - */ - ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */ - - status &= sc->sc_imask; /* discard unasked-for bits */ - - /* - * If there are no status bits set, then this interrupt was not - * for me (should have been caught above). - */ - - if (!status) - return IRQ_NONE; - - sc->sc_intrstatus = status; - - if (status & ATH9K_INT_FATAL) { - /* need a chip reset */ - sched = true; - } else if (status & ATH9K_INT_RXORN) { - /* need a chip reset */ - sched = true; - } else { - if (status & ATH9K_INT_SWBA) { - /* schedule a tasklet for beacon handling */ - tasklet_schedule(&sc->bcon_tasklet); - } - if (status & ATH9K_INT_RXEOL) { - /* - * NB: the hardware should re-read the link when - * RXE bit is written, but it doesn't work - * at least on older hardware revs. - */ - sched = true; - } - - if (status & ATH9K_INT_TXURN) - /* bump tx trigger level */ - ath9k_hw_updatetxtriglevel(ah, true); - /* XXX: optimize this */ - if (status & ATH9K_INT_RX) - sched = true; - if (status & ATH9K_INT_TX) - sched = true; - if (status & ATH9K_INT_BMISS) - sched = true; - /* carrier sense timeout */ - if (status & ATH9K_INT_CST) - sched = true; - if (status & ATH9K_INT_MIB) { - /* - * Disable interrupts until we service the MIB - * interrupt; otherwise it will continue to - * fire. - */ - ath9k_hw_set_interrupts(ah, 0); - /* - * Let the hal handle the event. We assume - * it will clear whatever condition caused - * the interrupt. - */ - ath9k_hw_procmibevent(ah, &sc->sc_halstats); - ath9k_hw_set_interrupts(ah, sc->sc_imask); - } - if (status & ATH9K_INT_TIM_TIMER) { - if (!(ah->ah_caps.hw_caps & - ATH9K_HW_CAP_AUTOSLEEP)) { - /* Clear RxAbort bit so that we can - * receive frames */ - ath9k_hw_setrxabort(ah, 0); - sched = true; - } - } - } - } while (0); - - if (sched) { - /* turn off every interrupt except SWBA */ - ath9k_hw_set_interrupts(ah, (sc->sc_imask & ATH9K_INT_SWBA)); - tasklet_schedule(&sc->intr_tq); - } - - return IRQ_HANDLED; -} - -/* Deferred interrupt processing */ - -static void ath9k_tasklet(unsigned long data) -{ - struct ath_softc *sc = (struct ath_softc *)data; - u32 status = sc->sc_intrstatus; - - if (status & ATH9K_INT_FATAL) { - /* need a chip reset */ - ath_reset(sc, false); - return; - } else { - - if (status & - (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) { - /* XXX: fill me in */ - /* - if (status & ATH9K_INT_RXORN) { - } - if (status & ATH9K_INT_RXEOL) { - } - */ - spin_lock_bh(&sc->sc_rxflushlock); - ath_rx_tasklet(sc, 0); - spin_unlock_bh(&sc->sc_rxflushlock); - } - /* XXX: optimize this */ - if (status & ATH9K_INT_TX) - ath_tx_tasklet(sc); - /* XXX: fill me in */ - /* - if (status & ATH9K_INT_BMISS) { - } - if (status & (ATH9K_INT_TIM | ATH9K_INT_DTIMSYNC)) { - if (status & ATH9K_INT_TIM) { - } - if (status & ATH9K_INT_DTIMSYNC) { - } - } - */ - } - - /* re-enable hardware interrupt */ - ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); -} - -int ath_init(u16 devid, struct ath_softc *sc) -{ - struct ath_hal *ah = NULL; - int status; - int error = 0, i; - int csz = 0; - - /* XXX: hardware will not be ready until ath_open() being called */ - sc->sc_flags |= SC_OP_INVALID; - sc->sc_debug = DBG_DEFAULT; - - spin_lock_init(&sc->sc_resetlock); - tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc); - tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet, - (unsigned long)sc); - - /* - * Cache line size is used to size and align various - * structures used to communicate with the hardware. - */ - bus_read_cachesize(sc, &csz); - /* XXX assert csz is non-zero */ - sc->sc_cachelsz = csz << 2; /* convert to bytes */ - - ah = ath9k_hw_attach(devid, sc, sc->mem, &status); - if (ah == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to attach hardware; HAL status %u\n", - __func__, status); - error = -ENXIO; - goto bad; - } - sc->sc_ah = ah; - - /* Get the hardware key cache size. */ - sc->sc_keymax = ah->ah_caps.keycache_size; - if (sc->sc_keymax > ATH_KEYMAX) { - DPRINTF(sc, ATH_DBG_KEYCACHE, - "%s: Warning, using only %u entries in %u key cache\n", - __func__, ATH_KEYMAX, sc->sc_keymax); - sc->sc_keymax = ATH_KEYMAX; - } - - /* - * Reset the key cache since some parts do not - * reset the contents on initial power up. - */ - for (i = 0; i < sc->sc_keymax; i++) - ath9k_hw_keyreset(ah, (u16) i); - /* - * Mark key cache slots associated with global keys - * as in use. If we knew TKIP was not to be used we - * could leave the +32, +64, and +32+64 slots free. - * XXX only for splitmic. - */ - for (i = 0; i < IEEE80211_WEP_NKID; i++) { - set_bit(i, sc->sc_keymap); - set_bit(i + 32, sc->sc_keymap); - set_bit(i + 64, sc->sc_keymap); - set_bit(i + 32 + 64, sc->sc_keymap); - } - - /* Collect the channel list using the default country code */ - - error = ath_setup_channels(sc); - if (error) - goto bad; - - /* default to MONITOR mode */ - sc->sc_ah->ah_opmode = ATH9K_M_MONITOR; - - /* Setup rate tables */ - - ath_rate_attach(sc); - ath_setup_rates(sc, IEEE80211_BAND_2GHZ); - ath_setup_rates(sc, IEEE80211_BAND_5GHZ); - - /* - * Allocate hardware transmit queues: one queue for - * beacon frames and one data queue for each QoS - * priority. Note that the hal handles reseting - * these queues at the needed time. - */ - sc->sc_bhalq = ath_beaconq_setup(ah); - if (sc->sc_bhalq == -1) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup a beacon xmit queue\n", __func__); - error = -EIO; - goto bad2; - } - sc->sc_cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0); - if (sc->sc_cabq == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup CAB xmit queue\n", __func__); - error = -EIO; - goto bad2; - } - - sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME; - ath_cabq_update(sc); - - for (i = 0; i < ARRAY_SIZE(sc->sc_haltype2q); i++) - sc->sc_haltype2q[i] = -1; - - /* Setup data queues */ - /* NB: ensure BK queue is the lowest priority h/w queue */ - if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup xmit queue for BK traffic\n", - __func__); - error = -EIO; - goto bad2; - } - - if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup xmit queue for BE traffic\n", - __func__); - error = -EIO; - goto bad2; - } - if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup xmit queue for VI traffic\n", - __func__); - error = -EIO; - goto bad2; - } - if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup xmit queue for VO traffic\n", - __func__); - error = -EIO; - goto bad2; - } - - /* Initializes the noise floor to a reasonable default value. - * Later on this will be updated during ANI processing. */ - - sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR; - setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc); - - if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, - ATH9K_CIPHER_TKIP, NULL)) { - /* - * Whether we should enable h/w TKIP MIC. - * XXX: if we don't support WME TKIP MIC, then we wouldn't - * report WMM capable, so it's always safe to turn on - * TKIP MIC in this case. - */ - ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC, - 0, 1, NULL); - } - - /* - * Check whether the separate key cache entries - * are required to handle both tx+rx MIC keys. - * With split mic keys the number of stations is limited - * to 27 otherwise 59. - */ - if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, - ATH9K_CIPHER_TKIP, NULL) - && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, - ATH9K_CIPHER_MIC, NULL) - && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT, - 0, NULL)) - sc->sc_splitmic = 1; - - /* turn on mcast key search if possible */ - if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL)) - (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1, - 1, NULL); - - sc->sc_config.txpowlimit = ATH_TXPOWER_MAX; - sc->sc_config.txpowlimit_override = 0; - - /* 11n Capabilities */ - if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) { - sc->sc_flags |= SC_OP_TXAGGR; - sc->sc_flags |= SC_OP_RXAGGR; - } - - sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask; - sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask; - - ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL); - sc->sc_defant = ath9k_hw_getdefantenna(ah); - - ath9k_hw_getmac(ah, sc->sc_myaddr); - if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) { - ath9k_hw_getbssidmask(ah, sc->sc_bssidmask); - ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask); - ath9k_hw_setbssidmask(ah, sc->sc_bssidmask); - } - - sc->sc_slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */ - - /* initialize beacon slots */ - for (i = 0; i < ARRAY_SIZE(sc->sc_bslot); i++) - sc->sc_bslot[i] = ATH_IF_ID_ANY; - - /* save MISC configurations */ - sc->sc_config.swBeaconProcess = 1; - -#ifdef CONFIG_SLOW_ANT_DIV - /* range is 40 - 255, we use something in the middle */ - ath_slow_ant_div_init(&sc->sc_antdiv, sc, 0x127); -#endif - - /* setup channels and rates */ - - sc->sbands[IEEE80211_BAND_2GHZ].channels = - sc->channels[IEEE80211_BAND_2GHZ]; - sc->sbands[IEEE80211_BAND_2GHZ].bitrates = - sc->rates[IEEE80211_BAND_2GHZ]; - sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; - - if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) { - sc->sbands[IEEE80211_BAND_5GHZ].channels = - sc->channels[IEEE80211_BAND_5GHZ]; - sc->sbands[IEEE80211_BAND_5GHZ].bitrates = - sc->rates[IEEE80211_BAND_5GHZ]; - sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ; - } - - return 0; -bad2: - /* cleanup tx queues */ - for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) - if (ATH_TXQ_SETUP(sc, i)) - ath_tx_cleanupq(sc, &sc->sc_txq[i]); -bad: - if (ah) - ath9k_hw_detach(ah); - - return error; -} - -/*******************/ -/* Node Management */ -/*******************/ - -void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta) -{ - struct ath_node *an; - - an = (struct ath_node *)sta->drv_priv; - - if (sc->sc_flags & SC_OP_TXAGGR) - ath_tx_node_init(sc, an); - - an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + - sta->ht_cap.ampdu_factor); - an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density); - - ath_chainmask_sel_init(sc, an); - ath_chainmask_sel_timerstart(&an->an_chainmask_sel); -} - -void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta) -{ - struct ath_node *an = (struct ath_node *)sta->drv_priv; - - ath_chainmask_sel_timerstop(&an->an_chainmask_sel); - - if (sc->sc_flags & SC_OP_TXAGGR) - ath_tx_node_cleanup(sc, an); -} - -/* - * Set up New Node - * - * Setup driver-specific state for a newly associated node. This routine - * really only applies if compression or XR are enabled, there is no code - * covering any other cases. -*/ - -void ath_newassoc(struct ath_softc *sc, - struct ath_node *an, int isnew, int isuapsd) -{ - int tidno; - - /* if station reassociates, tear down the aggregation state. */ - if (!isnew) { - for (tidno = 0; tidno < WME_NUM_TID; tidno++) { - if (sc->sc_flags & SC_OP_TXAGGR) - ath_tx_aggr_teardown(sc, an, tidno); - } - } -} - -/**************/ -/* Encryption */ -/**************/ - -void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot) -{ - ath9k_hw_keyreset(sc->sc_ah, keyix); - if (freeslot) - clear_bit(keyix, sc->sc_keymap); -} - -int ath_keyset(struct ath_softc *sc, - u16 keyix, - struct ath9k_keyval *hk, - const u8 mac[ETH_ALEN]) -{ - bool status; - - status = ath9k_hw_set_keycache_entry(sc->sc_ah, - keyix, hk, mac, false); - - return status != false; -} - -/***********************/ -/* TX Power/Regulatory */ -/***********************/ - -/* - * Set Transmit power in HAL - * - * This routine makes the actual HAL calls to set the new transmit power - * limit. -*/ - -void ath_update_txpow(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - u32 txpow; - - if (sc->sc_curtxpow != sc->sc_config.txpowlimit) { - ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit); - /* read back in case value is clamped */ - ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow); - sc->sc_curtxpow = txpow; - } -} - -/**************************/ -/* Slow Antenna Diversity */ -/**************************/ - -void ath_slow_ant_div_init(struct ath_antdiv *antdiv, - struct ath_softc *sc, - int32_t rssitrig) -{ - int trig; - - /* antdivf_rssitrig can range from 40 - 0xff */ - trig = (rssitrig > 0xff) ? 0xff : rssitrig; - trig = (rssitrig < 40) ? 40 : rssitrig; - - antdiv->antdiv_sc = sc; - antdiv->antdivf_rssitrig = trig; -} - -void ath_slow_ant_div_start(struct ath_antdiv *antdiv, - u8 num_antcfg, - const u8 *bssid) -{ - antdiv->antdiv_num_antcfg = - num_antcfg < ATH_ANT_DIV_MAX_CFG ? - num_antcfg : ATH_ANT_DIV_MAX_CFG; - antdiv->antdiv_state = ATH_ANT_DIV_IDLE; - antdiv->antdiv_curcfg = 0; - antdiv->antdiv_bestcfg = 0; - antdiv->antdiv_laststatetsf = 0; - - memcpy(antdiv->antdiv_bssid, bssid, sizeof(antdiv->antdiv_bssid)); - - antdiv->antdiv_start = 1; -} - -void ath_slow_ant_div_stop(struct ath_antdiv *antdiv) -{ - antdiv->antdiv_start = 0; -} - -static int32_t ath_find_max_val(int32_t *val, - u8 num_val, u8 *max_index) -{ - u32 MaxVal = *val++; - u32 cur_index = 0; - - *max_index = 0; - while (++cur_index < num_val) { - if (*val > MaxVal) { - MaxVal = *val; - *max_index = cur_index; - } - - val++; - } - - return MaxVal; -} - -void ath_slow_ant_div(struct ath_antdiv *antdiv, - struct ieee80211_hdr *hdr, - struct ath_rx_status *rx_stats) -{ - struct ath_softc *sc = antdiv->antdiv_sc; - struct ath_hal *ah = sc->sc_ah; - u64 curtsf = 0; - u8 bestcfg, curcfg = antdiv->antdiv_curcfg; - __le16 fc = hdr->frame_control; - - if (antdiv->antdiv_start && ieee80211_is_beacon(fc) - && !compare_ether_addr(hdr->addr3, antdiv->antdiv_bssid)) { - antdiv->antdiv_lastbrssi[curcfg] = rx_stats->rs_rssi; - antdiv->antdiv_lastbtsf[curcfg] = ath9k_hw_gettsf64(sc->sc_ah); - curtsf = antdiv->antdiv_lastbtsf[curcfg]; - } else { - return; - } - - switch (antdiv->antdiv_state) { - case ATH_ANT_DIV_IDLE: - if ((antdiv->antdiv_lastbrssi[curcfg] < - antdiv->antdivf_rssitrig) - && ((curtsf - antdiv->antdiv_laststatetsf) > - ATH_ANT_DIV_MIN_IDLE_US)) { - - curcfg++; - if (curcfg == antdiv->antdiv_num_antcfg) - curcfg = 0; - - if (!ath9k_hw_select_antconfig(ah, curcfg)) { - antdiv->antdiv_bestcfg = antdiv->antdiv_curcfg; - antdiv->antdiv_curcfg = curcfg; - antdiv->antdiv_laststatetsf = curtsf; - antdiv->antdiv_state = ATH_ANT_DIV_SCAN; - } - } - break; - - case ATH_ANT_DIV_SCAN: - if ((curtsf - antdiv->antdiv_laststatetsf) < - ATH_ANT_DIV_MIN_SCAN_US) - break; - - curcfg++; - if (curcfg == antdiv->antdiv_num_antcfg) - curcfg = 0; - - if (curcfg == antdiv->antdiv_bestcfg) { - ath_find_max_val(antdiv->antdiv_lastbrssi, - antdiv->antdiv_num_antcfg, &bestcfg); - if (!ath9k_hw_select_antconfig(ah, bestcfg)) { - antdiv->antdiv_bestcfg = bestcfg; - antdiv->antdiv_curcfg = bestcfg; - antdiv->antdiv_laststatetsf = curtsf; - antdiv->antdiv_state = ATH_ANT_DIV_IDLE; - } - } else { - if (!ath9k_hw_select_antconfig(ah, curcfg)) { - antdiv->antdiv_curcfg = curcfg; - antdiv->antdiv_laststatetsf = curtsf; - antdiv->antdiv_state = ATH_ANT_DIV_SCAN; - } - } - - break; - } -} - -/***********************/ -/* Descriptor Handling */ -/***********************/ - -/* - * Set up DMA descriptors - * - * This function will allocate both the DMA descriptor structure, and the - * buffers it contains. These are used to contain the descriptors used - * by the system. -*/ - -int ath_descdma_setup(struct ath_softc *sc, - struct ath_descdma *dd, - struct list_head *head, - const char *name, - int nbuf, - int ndesc) -{ -#define DS2PHYS(_dd, _ds) \ - ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) -#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0) -#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096) - - struct ath_desc *ds; - struct ath_buf *bf; - int i, bsize, error; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA: %u buffers %u desc/buf\n", - __func__, name, nbuf, ndesc); - - /* ath_desc must be a multiple of DWORDs */ - if ((sizeof(struct ath_desc) % 4) != 0) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: ath_desc not DWORD aligned\n", - __func__); - ASSERT((sizeof(struct ath_desc) % 4) == 0); - error = -ENOMEM; - goto fail; - } - - dd->dd_name = name; - dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc; - - /* - * Need additional DMA memory because we can't use - * descriptors that cross the 4K page boundary. Assume - * one skipped descriptor per 4K page. - */ - if (!(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) { - u32 ndesc_skipped = - ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len); - u32 dma_len; - - while (ndesc_skipped) { - dma_len = ndesc_skipped * sizeof(struct ath_desc); - dd->dd_desc_len += dma_len; - - ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len); - }; - } - - /* allocate descriptors */ - dd->dd_desc = pci_alloc_consistent(sc->pdev, - dd->dd_desc_len, - &dd->dd_desc_paddr); - if (dd->dd_desc == NULL) { - error = -ENOMEM; - goto fail; - } - ds = dd->dd_desc; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA map: %p (%u) -> %llx (%u)\n", - __func__, dd->dd_name, ds, (u32) dd->dd_desc_len, - ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len); - - /* allocate buffers */ - bsize = sizeof(struct ath_buf) * nbuf; - bf = kmalloc(bsize, GFP_KERNEL); - if (bf == NULL) { - error = -ENOMEM; - goto fail2; - } - memset(bf, 0, bsize); - dd->dd_bufptr = bf; - - INIT_LIST_HEAD(head); - for (i = 0; i < nbuf; i++, bf++, ds += ndesc) { - bf->bf_desc = ds; - bf->bf_daddr = DS2PHYS(dd, ds); - - if (!(sc->sc_ah->ah_caps.hw_caps & - ATH9K_HW_CAP_4KB_SPLITTRANS)) { - /* - * Skip descriptor addresses which can cause 4KB - * boundary crossing (addr + length) with a 32 dword - * descriptor fetch. - */ - while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { - ASSERT((caddr_t) bf->bf_desc < - ((caddr_t) dd->dd_desc + - dd->dd_desc_len)); - - ds += ndesc; - bf->bf_desc = ds; - bf->bf_daddr = DS2PHYS(dd, ds); - } - } - list_add_tail(&bf->list, head); - } - return 0; -fail2: - pci_free_consistent(sc->pdev, - dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); -fail: - memset(dd, 0, sizeof(*dd)); - return error; -#undef ATH_DESC_4KB_BOUND_CHECK -#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED -#undef DS2PHYS -} - -/* - * Cleanup DMA descriptors - * - * This function will free the DMA block that was allocated for the descriptor - * pool. Since this was allocated as one "chunk", it is freed in the same - * manner. -*/ - -void ath_descdma_cleanup(struct ath_softc *sc, - struct ath_descdma *dd, - struct list_head *head) -{ - /* Free memory associated with descriptors */ - pci_free_consistent(sc->pdev, - dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); - - INIT_LIST_HEAD(head); - kfree(dd->dd_bufptr); - memset(dd, 0, sizeof(*dd)); -} - -/*************/ -/* Utilities */ -/*************/ - -int ath_get_hal_qnum(u16 queue, struct ath_softc *sc) -{ - int qnum; - - switch (queue) { - case 0: - qnum = sc->sc_haltype2q[ATH9K_WME_AC_VO]; - break; - case 1: - qnum = sc->sc_haltype2q[ATH9K_WME_AC_VI]; - break; - case 2: - qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE]; - break; - case 3: - qnum = sc->sc_haltype2q[ATH9K_WME_AC_BK]; - break; - default: - qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE]; - break; - } - - return qnum; -} - -int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc) -{ - int qnum; - - switch (queue) { - case ATH9K_WME_AC_VO: - qnum = 0; - break; - case ATH9K_WME_AC_VI: - qnum = 1; - break; - case ATH9K_WME_AC_BE: - qnum = 2; - break; - case ATH9K_WME_AC_BK: - qnum = 3; - break; - default: - qnum = -1; - break; - } - - return qnum; -} - - -/* - * Expand time stamp to TSF - * - * Extend 15-bit time stamp from rx descriptor to - * a full 64-bit TSF using the current h/w TSF. -*/ - -u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp) -{ - u64 tsf; - - tsf = ath9k_hw_gettsf64(sc->sc_ah); - if ((tsf & 0x7fff) < rstamp) - tsf -= 0x8000; - return (tsf & ~0x7fff) | rstamp; -} - -/* - * Set Default Antenna - * - * Call into the HAL to set the default antenna to use. Not really valid for - * MIMO technology. -*/ - -void ath_setdefantenna(void *context, u32 antenna) -{ - struct ath_softc *sc = (struct ath_softc *)context; - struct ath_hal *ah = sc->sc_ah; - - /* XXX block beacon interrupts */ - ath9k_hw_setantenna(ah, antenna); - sc->sc_defant = antenna; - sc->sc_rxotherant = 0; -} - -/* - * Set Slot Time - * - * This will wake up the chip if required, and set the slot time for the - * frame (maximum transmit time). Slot time is assumed to be already set - * in the ATH object member sc_slottime -*/ - -void ath_setslottime(struct ath_softc *sc) -{ - ath9k_hw_setslottime(sc->sc_ah, sc->sc_slottime); - sc->sc_updateslot = OK; -} diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index e6725567109d..21ee0c240528 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -47,10 +47,6 @@ struct ath_node; -/******************/ -/* Utility macros */ -/******************/ - /* Macro to expand scalars to 64-bit objects */ #define ito64(x) (sizeof(x) == 8) ? \ @@ -86,11 +82,6 @@ struct ath_node; #define ATH_TXQ_SETUP(sc, i) ((sc)->sc_txqsetup & (1<= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul)) -#define ATH_RSSI_OUT(x) \ - (((x) != ATH_RSSI_DUMMY_MARKER) ? \ - (ATH_EP_RND((x), ATH_RSSI_EP_MULTIPLIER)) : ATH_RSSI_DUMMY_MARKER) -#define ATH_RSSI_IN(x) \ - (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER)) -#define ATH_LPF_RSSI(x, y, len) \ - ((x != ATH_RSSI_DUMMY_MARKER) ? \ - (((x) * ((len) - 1) + (y)) / (len)) : (y)) -#define ATH_RSSI_LPF(x, y) do { \ - if ((y) >= RSSI_LPF_THRESHOLD) \ - x = ATH_LPF_RSSI((x), \ - ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN); \ - } while (0) - +#define ATH_RSSI_DUMMY_MARKER 0x127 +#define ATH_RATE_DUMMY_MARKER 0 enum PROT_MODE { PROT_M_NONE = 0, @@ -748,12 +633,6 @@ enum PROT_MODE { PROT_M_CTSONLY }; -enum RATE_TYPE { - NORMAL_RATE = 0, - HALF_RATE, - QUARTER_RATE -}; - struct ath_ht_info { enum ath9k_ht_macmode tx_chan_width; u8 ext_chan_offset; @@ -881,27 +760,9 @@ struct ath_softc { struct ath_ani sc_ani; }; -int ath_init(u16 devid, struct ath_softc *sc); -int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan); -void ath_stop(struct ath_softc *sc); -irqreturn_t ath_isr(int irq, void *dev); int ath_reset(struct ath_softc *sc, bool retry_tx); -int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan); - -/*********************/ -/* Utility Functions */ -/*********************/ - -void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot); -int ath_keyset(struct ath_softc *sc, - u16 keyix, - struct ath9k_keyval *hk, - const u8 mac[ETH_ALEN]); int ath_get_hal_qnum(u16 queue, struct ath_softc *sc); int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc); -void ath_setslottime(struct ath_softc *sc); -void ath_update_txpow(struct ath_softc *sc); int ath_cabq_update(struct ath_softc *); -u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp); #endif /* CORE_H */ diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 54d89abce478..f226a4daef75 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -14,8 +14,6 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -/* mac80211 and PCI callbacks */ - #include #include "core.h" #include "reg.h" @@ -40,6 +38,580 @@ static struct pci_device_id ath_pci_id_table[] __devinitdata = { static void ath_detach(struct ath_softc *sc); +/* return bus cachesize in 4B word units */ + +static void bus_read_cachesize(struct ath_softc *sc, int *csz) +{ + u8 u8tmp; + + pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp); + *csz = (int)u8tmp; + + /* + * This check was put in to avoid "unplesant" consequences if + * the bootrom has not fully initialized all PCI devices. + * Sometimes the cache line size register is not set + */ + + if (*csz == 0) + *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */ +} + +static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) +{ + sc->sc_curmode = mode; + /* + * All protection frames are transmited at 2Mb/s for + * 11g, otherwise at 1Mb/s. + * XXX select protection rate index from rate table. + */ + sc->sc_protrix = (mode == ATH9K_MODE_11G ? 1 : 0); +} + +static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan) +{ + if (chan->chanmode == CHANNEL_A) + return ATH9K_MODE_11A; + else if (chan->chanmode == CHANNEL_G) + return ATH9K_MODE_11G; + else if (chan->chanmode == CHANNEL_B) + return ATH9K_MODE_11B; + else if (chan->chanmode == CHANNEL_A_HT20) + return ATH9K_MODE_11NA_HT20; + else if (chan->chanmode == CHANNEL_G_HT20) + return ATH9K_MODE_11NG_HT20; + else if (chan->chanmode == CHANNEL_A_HT40PLUS) + return ATH9K_MODE_11NA_HT40PLUS; + else if (chan->chanmode == CHANNEL_A_HT40MINUS) + return ATH9K_MODE_11NA_HT40MINUS; + else if (chan->chanmode == CHANNEL_G_HT40PLUS) + return ATH9K_MODE_11NG_HT40PLUS; + else if (chan->chanmode == CHANNEL_G_HT40MINUS) + return ATH9K_MODE_11NG_HT40MINUS; + + WARN_ON(1); /* should not get here */ + + return ATH9K_MODE_11B; +} + +static void ath_update_txpow(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + u32 txpow; + + if (sc->sc_curtxpow != sc->sc_config.txpowlimit) { + ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit); + /* read back in case value is clamped */ + ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow); + sc->sc_curtxpow = txpow; + } +} + +static u8 parse_mpdudensity(u8 mpdudensity) +{ + /* + * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": + * 0 for no restriction + * 1 for 1/4 us + * 2 for 1/2 us + * 3 for 1 us + * 4 for 2 us + * 5 for 4 us + * 6 for 8 us + * 7 for 16 us + */ + switch (mpdudensity) { + case 0: + return 0; + case 1: + case 2: + case 3: + /* Our lower layer calculations limit our precision to + 1 microsecond */ + return 1; + case 4: + return 2; + case 5: + return 4; + case 6: + return 8; + case 7: + return 16; + default: + return 0; + } +} + +static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band) +{ + struct ath_rate_table *rate_table = NULL; + struct ieee80211_supported_band *sband; + struct ieee80211_rate *rate; + int i, maxrates; + + switch (band) { + case IEEE80211_BAND_2GHZ: + rate_table = sc->hw_rate_table[ATH9K_MODE_11G]; + break; + case IEEE80211_BAND_5GHZ: + rate_table = sc->hw_rate_table[ATH9K_MODE_11A]; + break; + default: + break; + } + + if (rate_table == NULL) + return; + + sband = &sc->sbands[band]; + rate = sc->rates[band]; + + if (rate_table->rate_cnt > ATH_RATE_MAX) + maxrates = ATH_RATE_MAX; + else + maxrates = rate_table->rate_cnt; + + for (i = 0; i < maxrates; i++) { + rate[i].bitrate = rate_table->info[i].ratekbps / 100; + rate[i].hw_value = rate_table->info[i].ratecode; + sband->n_bitrates++; + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Rate: %2dMbps, ratecode: %2d\n", + __func__, rate[i].bitrate / 10, rate[i].hw_value); + } +} + +static int ath_setup_channels(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + int nchan, i, a = 0, b = 0; + u8 regclassids[ATH_REGCLASSIDS_MAX]; + u32 nregclass = 0; + struct ieee80211_supported_band *band_2ghz; + struct ieee80211_supported_band *band_5ghz; + struct ieee80211_channel *chan_2ghz; + struct ieee80211_channel *chan_5ghz; + struct ath9k_channel *c; + + /* Fill in ah->ah_channels */ + if (!ath9k_regd_init_channels(ah, ATH_CHAN_MAX, (u32 *)&nchan, + regclassids, ATH_REGCLASSIDS_MAX, + &nregclass, CTRY_DEFAULT, false, 1)) { + u32 rd = ah->ah_currentRD; + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to collect channel list; " + "regdomain likely %u country code %u\n", + __func__, rd, CTRY_DEFAULT); + return -EINVAL; + } + + band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ]; + band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ]; + chan_2ghz = sc->channels[IEEE80211_BAND_2GHZ]; + chan_5ghz = sc->channels[IEEE80211_BAND_5GHZ]; + + for (i = 0; i < nchan; i++) { + c = &ah->ah_channels[i]; + if (IS_CHAN_2GHZ(c)) { + chan_2ghz[a].band = IEEE80211_BAND_2GHZ; + chan_2ghz[a].center_freq = c->channel; + chan_2ghz[a].max_power = c->maxTxPower; + + if (c->privFlags & CHANNEL_DISALLOW_ADHOC) + chan_2ghz[a].flags |= IEEE80211_CHAN_NO_IBSS; + if (c->channelFlags & CHANNEL_PASSIVE) + chan_2ghz[a].flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + band_2ghz->n_channels = ++a; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: 2MHz channel: %d, " + "channelFlags: 0x%x\n", + __func__, c->channel, c->channelFlags); + } else if (IS_CHAN_5GHZ(c)) { + chan_5ghz[b].band = IEEE80211_BAND_5GHZ; + chan_5ghz[b].center_freq = c->channel; + chan_5ghz[b].max_power = c->maxTxPower; + + if (c->privFlags & CHANNEL_DISALLOW_ADHOC) + chan_5ghz[b].flags |= IEEE80211_CHAN_NO_IBSS; + if (c->channelFlags & CHANNEL_PASSIVE) + chan_5ghz[b].flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + band_5ghz->n_channels = ++b; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: 5MHz channel: %d, " + "channelFlags: 0x%x\n", + __func__, c->channel, c->channelFlags); + } + } + + return 0; +} + +/* + * Set/change channels. If the channel is really being changed, it's done + * by reseting the chip. To accomplish this we must first cleanup any pending + * DMA, then restart stuff. +*/ +static int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) +{ + struct ath_hal *ah = sc->sc_ah; + bool fastcc = true, stopped; + + if (sc->sc_flags & SC_OP_INVALID) + return -EIO; + + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n", + __func__, + ath9k_hw_mhz2ieee(ah, sc->sc_ah->ah_curchan->channel, + sc->sc_ah->ah_curchan->channelFlags), + sc->sc_ah->ah_curchan->channel, + ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags), + hchan->channel, hchan->channelFlags); + + if (hchan->channel != sc->sc_ah->ah_curchan->channel || + hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags || + (sc->sc_flags & SC_OP_CHAINMASK_UPDATE) || + (sc->sc_flags & SC_OP_FULL_RESET)) { + int status; + /* + * This is only performed if the channel settings have + * actually changed. + * + * To switch channels clear any pending DMA operations; + * wait long enough for the RX fifo to drain, reset the + * hardware at the new frequency, and then re-enable + * the relevant bits of the h/w. + */ + ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */ + ath_draintxq(sc, false); /* clear pending tx frames */ + stopped = ath_stoprecv(sc); /* turn off frame recv */ + + /* XXX: do not flush receive queue here. We don't want + * to flush data frames already in queue because of + * changing channel. */ + + if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET)) + fastcc = false; + + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, hchan, sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, fastcc, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to reset channel %u (%uMhz) " + "flags 0x%x hal status %u\n", __func__, + ath9k_hw_mhz2ieee(ah, hchan->channel, + hchan->channelFlags), + hchan->channel, hchan->channelFlags, status); + spin_unlock_bh(&sc->sc_resetlock); + return -EIO; + } + spin_unlock_bh(&sc->sc_resetlock); + + sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE; + sc->sc_flags &= ~SC_OP_FULL_RESET; + + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to restart recv logic\n", __func__); + return -EIO; + } + + ath_setcurmode(sc, ath_chan2mode(hchan)); + ath_update_txpow(sc); + ath9k_hw_set_interrupts(ah, sc->sc_imask); + } + return 0; +} + +/* + * This routine performs the periodic noise floor calibration function + * that is used to adjust and optimize the chip performance. This + * takes environmental changes (location, temperature) into account. + * When the task is complete, it reschedules itself depending on the + * appropriate interval that was calculated. + */ +static void ath_ani_calibrate(unsigned long data) +{ + struct ath_softc *sc; + struct ath_hal *ah; + bool longcal = false; + bool shortcal = false; + bool aniflag = false; + unsigned int timestamp = jiffies_to_msecs(jiffies); + u32 cal_interval; + + sc = (struct ath_softc *)data; + ah = sc->sc_ah; + + /* + * don't calibrate when we're scanning. + * we are most likely not on our home channel. + */ + if (sc->rx_filter & FIF_BCN_PRBRESP_PROMISC) + return; + + /* Long calibration runs independently of short calibration. */ + if ((timestamp - sc->sc_ani.sc_longcal_timer) >= ATH_LONG_CALINTERVAL) { + longcal = true; + DPRINTF(sc, ATH_DBG_ANI, "%s: longcal @%lu\n", + __func__, jiffies); + sc->sc_ani.sc_longcal_timer = timestamp; + } + + /* Short calibration applies only while sc_caldone is false */ + if (!sc->sc_ani.sc_caldone) { + if ((timestamp - sc->sc_ani.sc_shortcal_timer) >= + ATH_SHORT_CALINTERVAL) { + shortcal = true; + DPRINTF(sc, ATH_DBG_ANI, "%s: shortcal @%lu\n", + __func__, jiffies); + sc->sc_ani.sc_shortcal_timer = timestamp; + sc->sc_ani.sc_resetcal_timer = timestamp; + } + } else { + if ((timestamp - sc->sc_ani.sc_resetcal_timer) >= + ATH_RESTART_CALINTERVAL) { + ath9k_hw_reset_calvalid(ah, ah->ah_curchan, + &sc->sc_ani.sc_caldone); + if (sc->sc_ani.sc_caldone) + sc->sc_ani.sc_resetcal_timer = timestamp; + } + } + + /* Verify whether we must check ANI */ + if ((timestamp - sc->sc_ani.sc_checkani_timer) >= + ATH_ANI_POLLINTERVAL) { + aniflag = true; + sc->sc_ani.sc_checkani_timer = timestamp; + } + + /* Skip all processing if there's nothing to do. */ + if (longcal || shortcal || aniflag) { + /* Call ANI routine if necessary */ + if (aniflag) + ath9k_hw_ani_monitor(ah, &sc->sc_halstats, + ah->ah_curchan); + + /* Perform calibration if necessary */ + if (longcal || shortcal) { + bool iscaldone = false; + + if (ath9k_hw_calibrate(ah, ah->ah_curchan, + sc->sc_rx_chainmask, longcal, + &iscaldone)) { + if (longcal) + sc->sc_ani.sc_noise_floor = + ath9k_hw_getchan_noise(ah, + ah->ah_curchan); + + DPRINTF(sc, ATH_DBG_ANI, + "%s: calibrate chan %u/%x nf: %d\n", + __func__, + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags, + sc->sc_ani.sc_noise_floor); + } else { + DPRINTF(sc, ATH_DBG_ANY, + "%s: calibrate chan %u/%x failed\n", + __func__, + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags); + } + sc->sc_ani.sc_caldone = iscaldone; + } + } + + /* + * Set timer interval based on previous results. + * The interval must be the shortest necessary to satisfy ANI, + * short calibration and long calibration. + */ + + cal_interval = ATH_ANI_POLLINTERVAL; + if (!sc->sc_ani.sc_caldone) + cal_interval = min(cal_interval, (u32)ATH_SHORT_CALINTERVAL); + + mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(cal_interval)); +} + +/* + * Update tx/rx chainmask. For legacy association, + * hard code chainmask to 1x1, for 11n association, use + * the chainmask configuration. + */ +static void ath_update_chainmask(struct ath_softc *sc, int is_ht) +{ + sc->sc_flags |= SC_OP_CHAINMASK_UPDATE; + if (is_ht) { + sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask; + sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask; + } else { + sc->sc_tx_chainmask = 1; + sc->sc_rx_chainmask = 1; + } + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: tx chmask: %d, rx chmask: %d\n", + __func__, sc->sc_tx_chainmask, sc->sc_rx_chainmask); +} + +static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta) +{ + struct ath_node *an; + + an = (struct ath_node *)sta->drv_priv; + + if (sc->sc_flags & SC_OP_TXAGGR) + ath_tx_node_init(sc, an); + + an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + + sta->ht_cap.ampdu_factor); + an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density); +} + +static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta) +{ + struct ath_node *an = (struct ath_node *)sta->drv_priv; + + if (sc->sc_flags & SC_OP_TXAGGR) + ath_tx_node_cleanup(sc, an); +} + +static void ath9k_tasklet(unsigned long data) +{ + struct ath_softc *sc = (struct ath_softc *)data; + u32 status = sc->sc_intrstatus; + + if (status & ATH9K_INT_FATAL) { + /* need a chip reset */ + ath_reset(sc, false); + return; + } else { + + if (status & + (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) { + spin_lock_bh(&sc->sc_rxflushlock); + ath_rx_tasklet(sc, 0); + spin_unlock_bh(&sc->sc_rxflushlock); + } + /* XXX: optimize this */ + if (status & ATH9K_INT_TX) + ath_tx_tasklet(sc); + } + + /* re-enable hardware interrupt */ + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); +} + +static irqreturn_t ath_isr(int irq, void *dev) +{ + struct ath_softc *sc = dev; + struct ath_hal *ah = sc->sc_ah; + enum ath9k_int status; + bool sched = false; + + do { + if (sc->sc_flags & SC_OP_INVALID) { + /* + * The hardware is not ready/present, don't + * touch anything. Note this can happen early + * on if the IRQ is shared. + */ + return IRQ_NONE; + } + if (!ath9k_hw_intrpend(ah)) { /* shared irq, not for us */ + return IRQ_NONE; + } + + /* + * Figure out the reason(s) for the interrupt. Note + * that the hal returns a pseudo-ISR that may include + * bits we haven't explicitly enabled so we mask the + * value to insure we only process bits we requested. + */ + ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */ + + status &= sc->sc_imask; /* discard unasked-for bits */ + + /* + * If there are no status bits set, then this interrupt was not + * for me (should have been caught above). + */ + if (!status) + return IRQ_NONE; + + sc->sc_intrstatus = status; + + if (status & ATH9K_INT_FATAL) { + /* need a chip reset */ + sched = true; + } else if (status & ATH9K_INT_RXORN) { + /* need a chip reset */ + sched = true; + } else { + if (status & ATH9K_INT_SWBA) { + /* schedule a tasklet for beacon handling */ + tasklet_schedule(&sc->bcon_tasklet); + } + if (status & ATH9K_INT_RXEOL) { + /* + * NB: the hardware should re-read the link when + * RXE bit is written, but it doesn't work + * at least on older hardware revs. + */ + sched = true; + } + + if (status & ATH9K_INT_TXURN) + /* bump tx trigger level */ + ath9k_hw_updatetxtriglevel(ah, true); + /* XXX: optimize this */ + if (status & ATH9K_INT_RX) + sched = true; + if (status & ATH9K_INT_TX) + sched = true; + if (status & ATH9K_INT_BMISS) + sched = true; + /* carrier sense timeout */ + if (status & ATH9K_INT_CST) + sched = true; + if (status & ATH9K_INT_MIB) { + /* + * Disable interrupts until we service the MIB + * interrupt; otherwise it will continue to + * fire. + */ + ath9k_hw_set_interrupts(ah, 0); + /* + * Let the hal handle the event. We assume + * it will clear whatever condition caused + * the interrupt. + */ + ath9k_hw_procmibevent(ah, &sc->sc_halstats); + ath9k_hw_set_interrupts(ah, sc->sc_imask); + } + if (status & ATH9K_INT_TIM_TIMER) { + if (!(ah->ah_caps.hw_caps & + ATH9K_HW_CAP_AUTOSLEEP)) { + /* Clear RxAbort bit so that we can + * receive frames */ + ath9k_hw_setrxabort(ah, 0); + sched = true; + } + } + } + } while (0); + + if (sched) { + /* turn off every interrupt except SWBA */ + ath9k_hw_set_interrupts(ah, (sc->sc_imask & ATH9K_INT_SWBA)); + tasklet_schedule(&sc->intr_tq); + } + + return IRQ_HANDLED; +} + static int ath_get_channel(struct ath_softc *sc, struct ieee80211_channel *chan) { @@ -90,6 +662,23 @@ static u32 ath_get_extchanmode(struct ath_softc *sc, return chanmode; } +static void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot) +{ + ath9k_hw_keyreset(sc->sc_ah, keyix); + if (freeslot) + clear_bit(keyix, sc->sc_keymap); +} + +static int ath_keyset(struct ath_softc *sc, u16 keyix, + struct ath9k_keyval *hk, const u8 mac[ETH_ALEN]) +{ + bool status; + + status = ath9k_hw_set_keycache_entry(sc->sc_ah, + keyix, hk, mac, false); + + return status != false; +} static int ath_setkey_tkip(struct ath_softc *sc, struct ieee80211_key_conf *key, @@ -327,20 +916,6 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, } } -void ath_get_beaconconfig(struct ath_softc *sc, - int if_id, - struct ath_beacon_config *conf) -{ - struct ieee80211_hw *hw = sc->hw; - - /* fill in beacon config data */ - - conf->beacon_interval = hw->conf.beacon_int; - conf->listen_interval = 100; - conf->dtim_count = 1; - conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; -} - /********************************/ /* LED functions */ /********************************/ @@ -722,6 +1297,244 @@ static void ath_detach(struct ath_softc *sc) ath9k_hw_detach(sc->sc_ah); } +static int ath_init(u16 devid, struct ath_softc *sc) +{ + struct ath_hal *ah = NULL; + int status; + int error = 0, i; + int csz = 0; + + /* XXX: hardware will not be ready until ath_open() being called */ + sc->sc_flags |= SC_OP_INVALID; + sc->sc_debug = DBG_DEFAULT; + + spin_lock_init(&sc->sc_resetlock); + tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc); + tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet, + (unsigned long)sc); + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + bus_read_cachesize(sc, &csz); + /* XXX assert csz is non-zero */ + sc->sc_cachelsz = csz << 2; /* convert to bytes */ + + ah = ath9k_hw_attach(devid, sc, sc->mem, &status); + if (ah == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to attach hardware; HAL status %u\n", + __func__, status); + error = -ENXIO; + goto bad; + } + sc->sc_ah = ah; + + /* Get the hardware key cache size. */ + sc->sc_keymax = ah->ah_caps.keycache_size; + if (sc->sc_keymax > ATH_KEYMAX) { + DPRINTF(sc, ATH_DBG_KEYCACHE, + "%s: Warning, using only %u entries in %u key cache\n", + __func__, ATH_KEYMAX, sc->sc_keymax); + sc->sc_keymax = ATH_KEYMAX; + } + + /* + * Reset the key cache since some parts do not + * reset the contents on initial power up. + */ + for (i = 0; i < sc->sc_keymax; i++) + ath9k_hw_keyreset(ah, (u16) i); + /* + * Mark key cache slots associated with global keys + * as in use. If we knew TKIP was not to be used we + * could leave the +32, +64, and +32+64 slots free. + * XXX only for splitmic. + */ + for (i = 0; i < IEEE80211_WEP_NKID; i++) { + set_bit(i, sc->sc_keymap); + set_bit(i + 32, sc->sc_keymap); + set_bit(i + 64, sc->sc_keymap); + set_bit(i + 32 + 64, sc->sc_keymap); + } + + /* Collect the channel list using the default country code */ + + error = ath_setup_channels(sc); + if (error) + goto bad; + + /* default to MONITOR mode */ + sc->sc_ah->ah_opmode = ATH9K_M_MONITOR; + + /* Setup rate tables */ + + ath_rate_attach(sc); + ath_setup_rates(sc, IEEE80211_BAND_2GHZ); + ath_setup_rates(sc, IEEE80211_BAND_5GHZ); + + /* + * Allocate hardware transmit queues: one queue for + * beacon frames and one data queue for each QoS + * priority. Note that the hal handles reseting + * these queues at the needed time. + */ + sc->sc_bhalq = ath_beaconq_setup(ah); + if (sc->sc_bhalq == -1) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup a beacon xmit queue\n", __func__); + error = -EIO; + goto bad2; + } + sc->sc_cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0); + if (sc->sc_cabq == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup CAB xmit queue\n", __func__); + error = -EIO; + goto bad2; + } + + sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME; + ath_cabq_update(sc); + + for (i = 0; i < ARRAY_SIZE(sc->sc_haltype2q); i++) + sc->sc_haltype2q[i] = -1; + + /* Setup data queues */ + /* NB: ensure BK queue is the lowest priority h/w queue */ + if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for BK traffic\n", + __func__); + error = -EIO; + goto bad2; + } + + if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for BE traffic\n", + __func__); + error = -EIO; + goto bad2; + } + if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for VI traffic\n", + __func__); + error = -EIO; + goto bad2; + } + if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for VO traffic\n", + __func__); + error = -EIO; + goto bad2; + } + + /* Initializes the noise floor to a reasonable default value. + * Later on this will be updated during ANI processing. */ + + sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR; + setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc); + + if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_TKIP, NULL)) { + /* + * Whether we should enable h/w TKIP MIC. + * XXX: if we don't support WME TKIP MIC, then we wouldn't + * report WMM capable, so it's always safe to turn on + * TKIP MIC in this case. + */ + ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC, + 0, 1, NULL); + } + + /* + * Check whether the separate key cache entries + * are required to handle both tx+rx MIC keys. + * With split mic keys the number of stations is limited + * to 27 otherwise 59. + */ + if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_TKIP, NULL) + && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_MIC, NULL) + && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT, + 0, NULL)) + sc->sc_splitmic = 1; + + /* turn on mcast key search if possible */ + if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL)) + (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1, + 1, NULL); + + sc->sc_config.txpowlimit = ATH_TXPOWER_MAX; + sc->sc_config.txpowlimit_override = 0; + + /* 11n Capabilities */ + if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) { + sc->sc_flags |= SC_OP_TXAGGR; + sc->sc_flags |= SC_OP_RXAGGR; + } + + sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask; + sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask; + + ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL); + sc->sc_defant = ath9k_hw_getdefantenna(ah); + + ath9k_hw_getmac(ah, sc->sc_myaddr); + if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) { + ath9k_hw_getbssidmask(ah, sc->sc_bssidmask); + ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask); + ath9k_hw_setbssidmask(ah, sc->sc_bssidmask); + } + + sc->sc_slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */ + + /* initialize beacon slots */ + for (i = 0; i < ARRAY_SIZE(sc->sc_bslot); i++) + sc->sc_bslot[i] = ATH_IF_ID_ANY; + + /* save MISC configurations */ + sc->sc_config.swBeaconProcess = 1; + +#ifdef CONFIG_SLOW_ANT_DIV + /* range is 40 - 255, we use something in the middle */ + ath_slow_ant_div_init(&sc->sc_antdiv, sc, 0x127); +#endif + + /* setup channels and rates */ + + sc->sbands[IEEE80211_BAND_2GHZ].channels = + sc->channels[IEEE80211_BAND_2GHZ]; + sc->sbands[IEEE80211_BAND_2GHZ].bitrates = + sc->rates[IEEE80211_BAND_2GHZ]; + sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; + + if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) { + sc->sbands[IEEE80211_BAND_5GHZ].channels = + sc->channels[IEEE80211_BAND_5GHZ]; + sc->sbands[IEEE80211_BAND_5GHZ].bitrates = + sc->rates[IEEE80211_BAND_5GHZ]; + sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ; + } + + return 0; +bad2: + /* cleanup tx queues */ + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) + if (ATH_TXQ_SETUP(sc, i)) + ath_tx_cleanupq(sc, &sc->sc_txq[i]); +bad: + if (ah) + ath9k_hw_detach(ah); + + return error; +} + static int ath_attach(u16 devid, struct ath_softc *sc) { struct ieee80211_hw *hw = sc->hw; @@ -810,11 +1623,243 @@ bad: return error; } +int ath_reset(struct ath_softc *sc, bool retry_tx) +{ + struct ath_hal *ah = sc->sc_ah; + int status; + int error = 0; + + ath9k_hw_set_interrupts(ah, 0); + ath_draintxq(sc, retry_tx); + ath_stoprecv(sc); + ath_flushrecv(sc); + + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to reset hardware; hal status %u\n", + __func__, status); + error = -EIO; + } + spin_unlock_bh(&sc->sc_resetlock); + + if (ath_startrecv(sc) != 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to start recv logic\n", __func__); + + /* + * We may be doing a reset in response to a request + * that changes the channel so update any state that + * might change as a result. + */ + ath_setcurmode(sc, ath_chan2mode(sc->sc_ah->ah_curchan)); + + ath_update_txpow(sc); + + if (sc->sc_flags & SC_OP_BEACONS) + ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */ + + ath9k_hw_set_interrupts(ah, sc->sc_imask); + + if (retry_tx) { + int i; + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { + if (ATH_TXQ_SETUP(sc, i)) { + spin_lock_bh(&sc->sc_txq[i].axq_lock); + ath_txq_schedule(sc, &sc->sc_txq[i]); + spin_unlock_bh(&sc->sc_txq[i].axq_lock); + } + } + } + + return error; +} + +/* + * This function will allocate both the DMA descriptor structure, and the + * buffers it contains. These are used to contain the descriptors used + * by the system. +*/ +int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, + struct list_head *head, const char *name, + int nbuf, int ndesc) +{ +#define DS2PHYS(_dd, _ds) \ + ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) +#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0) +#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096) + + struct ath_desc *ds; + struct ath_buf *bf; + int i, bsize, error; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA: %u buffers %u desc/buf\n", + __func__, name, nbuf, ndesc); + + /* ath_desc must be a multiple of DWORDs */ + if ((sizeof(struct ath_desc) % 4) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: ath_desc not DWORD aligned\n", + __func__); + ASSERT((sizeof(struct ath_desc) % 4) == 0); + error = -ENOMEM; + goto fail; + } + + dd->dd_name = name; + dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc; + + /* + * Need additional DMA memory because we can't use + * descriptors that cross the 4K page boundary. Assume + * one skipped descriptor per 4K page. + */ + if (!(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) { + u32 ndesc_skipped = + ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len); + u32 dma_len; + + while (ndesc_skipped) { + dma_len = ndesc_skipped * sizeof(struct ath_desc); + dd->dd_desc_len += dma_len; + + ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len); + }; + } + + /* allocate descriptors */ + dd->dd_desc = pci_alloc_consistent(sc->pdev, + dd->dd_desc_len, + &dd->dd_desc_paddr); + if (dd->dd_desc == NULL) { + error = -ENOMEM; + goto fail; + } + ds = dd->dd_desc; + DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA map: %p (%u) -> %llx (%u)\n", + __func__, dd->dd_name, ds, (u32) dd->dd_desc_len, + ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len); + + /* allocate buffers */ + bsize = sizeof(struct ath_buf) * nbuf; + bf = kmalloc(bsize, GFP_KERNEL); + if (bf == NULL) { + error = -ENOMEM; + goto fail2; + } + memset(bf, 0, bsize); + dd->dd_bufptr = bf; + + INIT_LIST_HEAD(head); + for (i = 0; i < nbuf; i++, bf++, ds += ndesc) { + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + + if (!(sc->sc_ah->ah_caps.hw_caps & + ATH9K_HW_CAP_4KB_SPLITTRANS)) { + /* + * Skip descriptor addresses which can cause 4KB + * boundary crossing (addr + length) with a 32 dword + * descriptor fetch. + */ + while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { + ASSERT((caddr_t) bf->bf_desc < + ((caddr_t) dd->dd_desc + + dd->dd_desc_len)); + + ds += ndesc; + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + } + } + list_add_tail(&bf->list, head); + } + return 0; +fail2: + pci_free_consistent(sc->pdev, + dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); +fail: + memset(dd, 0, sizeof(*dd)); + return error; +#undef ATH_DESC_4KB_BOUND_CHECK +#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED +#undef DS2PHYS +} + +void ath_descdma_cleanup(struct ath_softc *sc, + struct ath_descdma *dd, + struct list_head *head) +{ + pci_free_consistent(sc->pdev, + dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); + + INIT_LIST_HEAD(head); + kfree(dd->dd_bufptr); + memset(dd, 0, sizeof(*dd)); +} + +int ath_get_hal_qnum(u16 queue, struct ath_softc *sc) +{ + int qnum; + + switch (queue) { + case 0: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_VO]; + break; + case 1: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_VI]; + break; + case 2: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE]; + break; + case 3: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_BK]; + break; + default: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE]; + break; + } + + return qnum; +} + +int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc) +{ + int qnum; + + switch (queue) { + case ATH9K_WME_AC_VO: + qnum = 0; + break; + case ATH9K_WME_AC_VI: + qnum = 1; + break; + case ATH9K_WME_AC_BE: + qnum = 2; + break; + case ATH9K_WME_AC_BK: + qnum = 3; + break; + default: + qnum = -1; + break; + } + + return qnum; +} + +/**********************/ +/* mac80211 callbacks */ +/**********************/ + static int ath9k_start(struct ieee80211_hw *hw) { struct ath_softc *sc = hw->priv; struct ieee80211_channel *curchan = hw->conf.channel; - int error = 0, pos; + struct ath9k_channel *init_channel; + int error = 0, pos, status; DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with " "initial channel: %d MHz\n", __func__, curchan->center_freq); @@ -827,24 +1872,103 @@ static int ath9k_start(struct ieee80211_hw *hw) if (pos == -1) { DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); error = -EINVAL; - goto exit; + goto error; } sc->sc_ah->ah_channels[pos].chanmode = (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A; + init_channel = &sc->sc_ah->ah_channels[pos]; - error = ath_open(sc, &sc->sc_ah->ah_channels[pos]); - if (error) { + /* Reset SERDES registers */ + ath9k_hw_configpcipowersave(sc->sc_ah, 0); + + /* + * The basic interface to setting the hardware in a good + * state is ``reset''. On return the hardware is known to + * be powered up and with interrupts disabled. This must + * be followed by initialization of the appropriate bits + * and then setup of the interrupt mask. + */ + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(sc->sc_ah, init_channel, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to complete ath_open\n", __func__); - goto exit; + "%s: unable to reset hardware; hal status %u " + "(freq %u flags 0x%x)\n", __func__, status, + init_channel->channel, init_channel->channelFlags); + error = -EIO; + spin_unlock_bh(&sc->sc_resetlock); + goto error; } + spin_unlock_bh(&sc->sc_resetlock); + + /* + * This is needed only to setup initial state + * but it's best done after a reset. + */ + ath_update_txpow(sc); + + /* + * Setup the hardware after reset: + * The receive engine is set going. + * Frame transmit is handled entirely + * in the frame output path; there's nothing to do + * here except setup the interrupt mask. + */ + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to start recv logic\n", __func__); + error = -EIO; + goto error; + } + + /* Setup our intr mask. */ + sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX + | ATH9K_INT_RXEOL | ATH9K_INT_RXORN + | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL; + + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT) + sc->sc_imask |= ATH9K_INT_GTT; + + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) + sc->sc_imask |= ATH9K_INT_CST; + + /* + * Enable MIB interrupts when there are hardware phy counters. + * Note we only do this (at the moment) for station mode. + */ + if (ath9k_hw_phycounters(sc->sc_ah) && + ((sc->sc_ah->ah_opmode == ATH9K_M_STA) || + (sc->sc_ah->ah_opmode == ATH9K_M_IBSS))) + sc->sc_imask |= ATH9K_INT_MIB; + /* + * Some hardware processes the TIM IE and fires an + * interrupt when the TIM bit is set. For hardware + * that does, if not overridden by configuration, + * enable the TIM interrupt when operating as station. + */ + if ((sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) && + (sc->sc_ah->ah_opmode == ATH9K_M_STA) && + !sc->sc_config.swBeaconProcess) + sc->sc_imask |= ATH9K_INT_TIM; + + ath_setcurmode(sc, ath_chan2mode(init_channel)); + + sc->sc_flags &= ~SC_OP_INVALID; + + /* Disable BMISS interrupt when we're not associated */ + sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); + + ieee80211_wake_queues(sc->hw); #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) error = ath_start_rfkill_poll(sc); #endif -exit: +error: return error; } @@ -911,7 +2035,30 @@ static void ath9k_stop(struct ieee80211_hw *hw) return; } - ath_stop(sc); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Cleaning up\n", __func__); + + ieee80211_stop_queues(sc->hw); + + /* make sure h/w will not generate any interrupt + * before setting the invalid flag. */ + ath9k_hw_set_interrupts(sc->sc_ah, 0); + + if (!(sc->sc_flags & SC_OP_INVALID)) { + ath_draintxq(sc, false); + ath_stoprecv(sc); + ath9k_hw_phy_disable(sc->sc_ah); + } else + sc->sc_rxlink = NULL; + +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); +#endif + /* disable HAL and put h/w to sleep */ + ath9k_hw_disable(sc->sc_ah); + ath9k_hw_configpcipowersave(sc->sc_ah, 1); + + sc->sc_flags |= SC_OP_INVALID; DPRINTF(sc, ATH_DBG_CONFIG, "%s: Driver halt\n", __func__); } diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 7d1913d48d31..93dfea897ff2 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -1401,7 +1401,6 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, struct ath_softc *sc = priv; struct ath_rate_priv *ath_rc_priv = priv_sta; struct ath_tx_info_priv *tx_info_priv = NULL; - struct ath_node *an; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *hdr; int final_ts_idx, tx_status = 0, is_underrun = 0; @@ -1410,21 +1409,15 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; tx_info_priv = ATH_TX_INFO_PRIV(tx_info); - an = (struct ath_node *)sta->drv_priv; final_ts_idx = tx_info_priv->tx.ts_rateindex; - if (!an || !priv_sta || !ieee80211_is_data(fc) || + if (!priv_sta || !ieee80211_is_data(fc) || !tx_info_priv->update_rc) goto exit; if (tx_info_priv->tx.ts_status & ATH9K_TXERR_FILT) goto exit; - if (tx_info_priv->tx.ts_rssi > 0) { - ATH_RSSI_LPF(an->an_chainmask_sel.tx_avgrssi, - tx_info_priv->tx.ts_rssi); - } - /* * If underrun error is seen assume it as an excessive retry only * if prefetch trigger level have reached the max (0x3f for 5416) diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 6eae2542392a..743ad228b833 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -55,6 +55,28 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) ath9k_hw_rxena(ah); } +static void ath_setdefantenna(struct ath_softc *sc, u32 antenna) +{ + /* XXX block beacon interrupts */ + ath9k_hw_setantenna(sc->sc_ah, antenna); + sc->sc_defant = antenna; + sc->sc_rxotherant = 0; +} + +/* + * Extend 15-bit time stamp from rx descriptor to + * a full 64-bit TSF using the current h/w TSF. +*/ +static u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp) +{ + u64 tsf; + + tsf = ath9k_hw_gettsf64(sc->sc_ah); + if ((tsf & 0x7fff) < rstamp) + tsf -= 0x8000; + return (tsf & ~0x7fff) | rstamp; +} + static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, u32 len) { struct sk_buff *skb; diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index dad81a9df152..3de60c51e5f2 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -147,6 +147,19 @@ static int ath_aggr_query(struct ath_softc *sc, struct ath_node *an, u8 tidno) return 0; } +static void ath_get_beaconconfig(struct ath_softc *sc, int if_id, + struct ath_beacon_config *conf) +{ + struct ieee80211_hw *hw = sc->hw; + + /* fill in beacon config data */ + + conf->beacon_interval = hw->conf.beacon_int; + conf->listen_interval = 100; + conf->dtim_count = 1; + conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; +} + /* Calculate Atheros packet type from IEEE80211 packet header */ static enum ath9k_pkt_type get_hw_packet_type(struct sk_buff *skb) @@ -522,7 +535,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) struct ath_desc *ds = bf->bf_desc; struct ath_desc *lastds = bf->bf_lastbf->bf_desc; struct ath9k_11n_rate_series series[4]; - struct ath_node *an = NULL; struct sk_buff *skb; struct ieee80211_tx_info *tx_info; struct ieee80211_tx_rate *rates; @@ -540,9 +552,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) tx_info = IEEE80211_SKB_CB(skb); rates = tx_info->control.rates; - if (tx_info->control.sta) - an = (struct ath_node *)tx_info->control.sta->drv_priv; - if (ieee80211_has_morefrags(fc) || (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) { rates[1].count = rates[2].count = rates[3].count = 0; @@ -632,10 +641,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) (rates[i].flags & IEEE80211_TX_RC_SHORT_GI), bf_isshpreamble(bf)); - if (bf_isht(bf) && an) - series[i].ChSel = ath_chainmask_sel_logic(sc, an); - else - series[i].ChSel = sc->sc_tx_chainmask; + series[i].ChSel = sc->sc_tx_chainmask; if (rtsctsena) series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS; -- cgit v1.2.2 From 99405f930fda280c9114b15e178902cd204f967f Mon Sep 17 00:00:00 2001 From: Sujith Date: Mon, 24 Nov 2008 12:08:35 +0530 Subject: ath9k: Use proper TX channel width for setting channels The TX channel width of the BSS can be obtained only after association. In all cases, default to HT20 if HT is enabled, and set chan width to HT40 only if the BSS supports it. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.h | 7 +-- drivers/net/wireless/ath9k/hw.c | 3 +- drivers/net/wireless/ath9k/main.c | 117 +++++++++++++++++++------------------- drivers/net/wireless/ath9k/xmit.c | 2 +- 4 files changed, 60 insertions(+), 69 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 21ee0c240528..f0c54377dfe6 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -633,11 +633,6 @@ enum PROT_MODE { PROT_M_CTSONLY }; -struct ath_ht_info { - enum ath9k_ht_macmode tx_chan_width; - u8 ext_chan_offset; -}; - #define SC_OP_INVALID BIT(0) #define SC_OP_BEACONS BIT(1) #define SC_OP_RXAGGR BIT(2) @@ -691,8 +686,8 @@ struct ath_softc { u8 sc_rxotherant; /* rx's on non-default antenna */ struct ath9k_node_stats sc_halstats; /* station-mode rssi stats */ - struct ath_ht_info sc_ht_info; enum ath9k_ht_extprotspacing sc_ht_extprotspacing; + enum ath9k_ht_macmode tx_chan_width; #ifdef CONFIG_SLOW_ANT_DIV struct ath_antdiv sc_antdiv; diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c index 10f6c08f6eb2..6eef10477896 100644 --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c @@ -2232,8 +2232,7 @@ bool ath9k_hw_reset(struct ath_hal *ah, struct ath9k_channel *chan, ((chan->channelFlags & CHANNEL_ALL) == (ah->ah_curchan->channelFlags & CHANNEL_ALL)) && (!AR_SREV_9280(ah) || (!IS_CHAN_A_5MHZ_SPACED(chan) && - !IS_CHAN_A_5MHZ_SPACED(ah-> - ah_curchan)))) { + !IS_CHAN_A_5MHZ_SPACED(ah->ah_curchan)))) { if (ath9k_hw_channel_change(ah, chan, macmode)) { ath9k_hw_loadnf(ah, ah->ah_curchan); diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index f226a4daef75..437e38a3c6d7 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -260,15 +260,6 @@ static int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) if (sc->sc_flags & SC_OP_INVALID) return -EIO; - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n", - __func__, - ath9k_hw_mhz2ieee(ah, sc->sc_ah->ah_curchan->channel, - sc->sc_ah->ah_curchan->channelFlags), - sc->sc_ah->ah_curchan->channel, - ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags), - hchan->channel, hchan->channelFlags); - if (hchan->channel != sc->sc_ah->ah_curchan->channel || hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags || (sc->sc_flags & SC_OP_CHAINMASK_UPDATE) || @@ -294,8 +285,14 @@ static int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET)) fastcc = false; + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: (%u MHz) -> (%u MHz), cflags:%x, chanwidth: %d\n", + __func__, + sc->sc_ah->ah_curchan->channel, + hchan->channel, hchan->channelFlags, sc->tx_chan_width); + spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, hchan, sc->sc_ht_info.tx_chan_width, + if (!ath9k_hw_reset(ah, hchan, sc->tx_chan_width, sc->sc_tx_chainmask, sc->sc_rx_chainmask, sc->sc_ht_extprotspacing, fastcc, &status)) { DPRINTF(sc, ATH_DBG_FATAL, @@ -626,11 +623,13 @@ static int ath_get_channel(struct ath_softc *sc, } static u32 ath_get_extchanmode(struct ath_softc *sc, - struct ieee80211_channel *chan) + struct ieee80211_channel *chan, + struct ieee80211_bss_conf *bss_conf) { u32 chanmode = 0; - u8 ext_chan_offset = sc->sc_ht_info.ext_chan_offset; - enum ath9k_ht_macmode tx_chan_width = sc->sc_ht_info.tx_chan_width; + u8 ext_chan_offset = bss_conf->ht.secondary_channel_offset; + enum ath9k_ht_macmode tx_chan_width = (bss_conf->ht.width_40_ok) ? + ATH9K_HT_MACMODE_2040 : ATH9K_HT_MACMODE_20; switch (chan->band) { case IEEE80211_BAND_2GHZ: @@ -828,17 +827,17 @@ static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info) static void ath9k_ht_conf(struct ath_softc *sc, struct ieee80211_bss_conf *bss_conf) { - struct ath_ht_info *ht_info = &sc->sc_ht_info; - if (sc->hw->conf.ht.enabled) { - ht_info->ext_chan_offset = bss_conf->ht.secondary_channel_offset; - if (bss_conf->ht.width_40_ok) - ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040; + sc->tx_chan_width = ATH9K_HT_MACMODE_2040; else - ht_info->tx_chan_width = ATH9K_HT_MACMODE_20; + sc->tx_chan_width = ATH9K_HT_MACMODE_20; - ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width); + ath9k_hw_set11nmac2040(sc->sc_ah, sc->tx_chan_width); + + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: BSS Changed HT, chanwidth: %d\n", + __func__, sc->tx_chan_width); } } @@ -892,26 +891,30 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, return; } - if (hw->conf.ht.enabled) + if (hw->conf.ht.enabled) { sc->sc_ah->ah_channels[pos].chanmode = - ath_get_extchanmode(sc, curchan); - else + ath_get_extchanmode(sc, curchan, bss_conf); + + if (bss_conf->ht.width_40_ok) + sc->tx_chan_width = ATH9K_HT_MACMODE_2040; + else + sc->tx_chan_width = ATH9K_HT_MACMODE_20; + } else { sc->sc_ah->ah_channels[pos].chanmode = (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A; + } /* set h/w channel */ if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to set channel\n", - __func__); + "%s: Unable to set channel\n", __func__); /* Start ANI */ mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL)); } else { - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: Bss Info DISSOC\n", __func__); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Bss Info DISSOC\n", __func__); sc->sc_curaid = 0; } } @@ -1044,7 +1047,7 @@ static void ath_radio_enable(struct ath_softc *sc) spin_lock_bh(&sc->sc_resetlock); if (!ath9k_hw_reset(ah, ah->ah_curchan, - sc->sc_ht_info.tx_chan_width, + sc->tx_chan_width, sc->sc_tx_chainmask, sc->sc_rx_chainmask, sc->sc_ht_extprotspacing, @@ -1102,7 +1105,7 @@ static void ath_radio_disable(struct ath_softc *sc) spin_lock_bh(&sc->sc_resetlock); if (!ath9k_hw_reset(ah, ah->ah_curchan, - sc->sc_ht_info.tx_chan_width, + sc->tx_chan_width, sc->sc_tx_chainmask, sc->sc_rx_chainmask, sc->sc_ht_extprotspacing, @@ -1636,7 +1639,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) spin_lock_bh(&sc->sc_resetlock); if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan, - sc->sc_ht_info.tx_chan_width, + sc->tx_chan_width, sc->sc_tx_chainmask, sc->sc_rx_chainmask, sc->sc_ht_extprotspacing, false, &status)) { DPRINTF(sc, ATH_DBG_FATAL, @@ -1864,8 +1867,6 @@ static int ath9k_start(struct ieee80211_hw *hw) DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with " "initial channel: %d MHz\n", __func__, curchan->center_freq); - memset(&sc->sc_ht_info, 0, sizeof(struct ath_ht_info)); - /* setup initial channel */ pos = ath_get_channel(sc, curchan); @@ -1875,6 +1876,7 @@ static int ath9k_start(struct ieee80211_hw *hw) goto error; } + sc->tx_chan_width = ATH9K_HT_MACMODE_20; sc->sc_ah->ah_channels[pos].chanmode = (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A; init_channel = &sc->sc_ah->ah_channels[pos]; @@ -1891,7 +1893,7 @@ static int ath9k_start(struct ieee80211_hw *hw) */ spin_lock_bh(&sc->sc_resetlock); if (!ath9k_hw_reset(sc->sc_ah, init_channel, - sc->sc_ht_info.tx_chan_width, + sc->tx_chan_width, sc->sc_tx_chainmask, sc->sc_rx_chainmask, sc->sc_ht_extprotspacing, false, &status)) { DPRINTF(sc, ATH_DBG_FATAL, @@ -2149,39 +2151,37 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, static int ath9k_config(struct ieee80211_hw *hw, u32 changed) { struct ath_softc *sc = hw->priv; - struct ieee80211_channel *curchan = hw->conf.channel; struct ieee80211_conf *conf = &hw->conf; - int pos; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", - __func__, - curchan->center_freq); - /* Update chainmask */ - ath_update_chainmask(sc, conf->ht.enabled); + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + struct ieee80211_channel *curchan = hw->conf.channel; + int pos; - pos = ath_get_channel(sc, curchan); - if (pos == -1) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); - return -EINVAL; - } + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", + __func__, curchan->center_freq); - sc->sc_ah->ah_channels[pos].chanmode = - (curchan->band == IEEE80211_BAND_2GHZ) ? - CHANNEL_G : CHANNEL_A; + pos = ath_get_channel(sc, curchan); + if (pos == -1) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); + return -EINVAL; + } - if (sc->sc_curaid && hw->conf.ht.enabled) + sc->tx_chan_width = ATH9K_HT_MACMODE_20; sc->sc_ah->ah_channels[pos].chanmode = - ath_get_extchanmode(sc, curchan); + (curchan->band == IEEE80211_BAND_2GHZ) ? + CHANNEL_G : CHANNEL_A; + + if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to set channel\n", __func__); + } + + if (changed & IEEE80211_CONF_CHANGE_HT) + ath_update_chainmask(sc, conf->ht.enabled); if (changed & IEEE80211_CONF_CHANGE_POWER) sc->sc_config.txpowlimit = 2 * conf->power_level; - /* set h/w channel */ - if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) - DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to set channel\n", - __func__); - return 0; } @@ -2421,11 +2421,8 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, sc->sc_flags &= ~SC_OP_PROTECT_ENABLE; } - if (changed & BSS_CHANGED_HT) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT\n", - __func__); + if (changed & BSS_CHANGED_HT) ath9k_ht_conf(sc, bss_conf); - } if (changed & BSS_CHANGED_ASSOC) { DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed ASSOC %d\n", diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 3de60c51e5f2..413fbdd38ab6 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -1148,7 +1148,7 @@ static void ath_drain_txdataq(struct ath_softc *sc, bool retry_tx) spin_lock_bh(&sc->sc_resetlock); if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan, - sc->sc_ht_info.tx_chan_width, + sc->tx_chan_width, sc->sc_tx_chainmask, sc->sc_rx_chainmask, sc->sc_ht_extprotspacing, true, &status)) { -- cgit v1.2.2 From b50563a68520dea3a19b5a8013c4ae0f8e3b49dd Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 24 Nov 2008 14:52:51 +0100 Subject: p54: fix wmm queue settings This patch fixes a regression (introduced by "p54: more definitions form lmac_longbow.h and pda.h") It turned out that the "ret" variable wasn't initialized and this caused the following warnings/errors to appear: wmaster1: failed to set TX queue parameters for queue 2 wmaster1: failed to set TX queue parameters for queue 3 wmaster1: failed to set TX queue parameters for queue 1 wmaster1: failed to set TX queue parameters for queue 0 Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 829b3f916db9..602392628e4e 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -1728,10 +1728,9 @@ static int p54_conf_tx(struct ieee80211_hw *dev, u16 queue, if ((params) && !(queue > 4)) { P54_SET_QUEUE(priv->qos_params[queue], params->aifs, params->cw_min, params->cw_max, params->txop); + ret = p54_set_edcf(dev); } else ret = -EINVAL; - if (!ret) - ret = p54_set_edcf(dev); mutex_unlock(&priv->conf_mutex); return ret; } -- cgit v1.2.2 From 860c6e6a15c5082e1a1ff1faeb56cdf439380e87 Mon Sep 17 00:00:00 2001 From: Ivan Kuten Date: Mon, 24 Nov 2008 15:17:54 -0500 Subject: mac80211: fix unaligned access in ieee80211_wep_encrypt_data Signed-off-by: Ivan Kuten Signed-off-by: John W. Linville --- net/mac80211/wep.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c index 7bbb98e846a3..7043ddc75498 100644 --- a/net/mac80211/wep.c +++ b/net/mac80211/wep.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include "ieee80211_i.h" @@ -125,10 +126,10 @@ void ieee80211_wep_encrypt_data(struct crypto_blkcipher *tfm, u8 *rc4key, { struct blkcipher_desc desc = { .tfm = tfm }; struct scatterlist sg; - __le32 *icv; + __le32 icv; - icv = (__le32 *)(data + data_len); - *icv = cpu_to_le32(~crc32_le(~0, data, data_len)); + icv = cpu_to_le32(~crc32_le(~0, data, data_len)); + put_unaligned(icv, (__le32 *)(data + data_len)); crypto_blkcipher_setkey(tfm, rc4key, klen); sg_init_one(&sg, data, data_len + WEP_ICV_LEN); -- cgit v1.2.2 From b235507cc5e552b9e75678d596727249e8fba01b Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 25 Nov 2008 16:47:36 -0500 Subject: mac80211_hwsim: fix-up some print_mac merge damage Some print_mac -> %pM conversions got lost in some merge or another... Signed-off-by: John W. Linville --- drivers/net/wireless/mac80211_hwsim.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index d8b5cf389405..530648b39935 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -452,9 +452,9 @@ static int mac80211_hwsim_config_interface(struct ieee80211_hw *hw, hwsim_check_magic(vif); if (conf->changed & IEEE80211_IFCC_BSSID) { DECLARE_MAC_BUF(mac); - printk(KERN_DEBUG "%s:%s: BSSID changed: %s\n", + printk(KERN_DEBUG "%s:%s: BSSID changed: %pM\n", wiphy_name(hw->wiphy), __func__, - print_mac(mac, conf->bssid)); + conf->bssid); memcpy(vp->bssid, conf->bssid, ETH_ALEN); } return 0; @@ -612,9 +612,8 @@ static void hwsim_send_ps_poll(void *dat, u8 *mac, struct ieee80211_vif *vif) if (!vp->assoc) return; - printk(KERN_DEBUG "%s:%s: send PS-Poll to %s for aid %d\n", - wiphy_name(data->hw->wiphy), __func__, - print_mac(buf, vp->bssid), vp->aid); + printk(KERN_DEBUG "%s:%s: send PS-Poll to %pM for aid %d\n", + wiphy_name(data->hw->wiphy), __func__, vp->bssid, vp->aid); skb = dev_alloc_skb(sizeof(*pspoll)); if (!skb) @@ -644,9 +643,8 @@ static void hwsim_send_nullfunc(struct mac80211_hwsim_data *data, u8 *mac, if (!vp->assoc) return; - printk(KERN_DEBUG "%s:%s: send data::nullfunc to %s ps=%d\n", - wiphy_name(data->hw->wiphy), __func__, - print_mac(buf, vp->bssid), ps); + printk(KERN_DEBUG "%s:%s: send data::nullfunc to %pM ps=%d\n", + wiphy_name(data->hw->wiphy), __func__, vp->bssid, ps); skb = dev_alloc_skb(sizeof(*hdr)); if (!skb) -- cgit v1.2.2