From b2ba34f370a66d9ed4bbd440e45296ecf3e267d3 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 13 Jun 2007 14:52:59 +1000 Subject: [POWERPC] Derive ebc ranges property from EBC registers In the device tree for Ebony, the 'ranges' property in the node for the EBC bridge shows the mappings from the chip select / address lines actually used for the EBC peripherals into the address space of the OPB. At present, these mappings are hardcoded in ebony.dts for the mappings set up by the OpenBIOS firmware when it configures the EBC bridge. This replaces the hardcoded mappings with code in the zImage to read the EBC configuration registers and create an appropriate ranges property based on them. This should make the zImage and kernel more robust to changes in firmware configuration. In particular, some of the Ebony's DIP switches can change the effective address of the Flash and other peripherals in OPB space. With this patch, the kernel will be able to cope with at least some of the possible variations. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/boot/44x.c | 29 +++++++++++++++++++++++++++++ arch/powerpc/boot/44x.h | 1 + arch/powerpc/boot/dcr.h | 37 +++++++++++++++++++++++++++++++++++++ arch/powerpc/boot/dts/ebony.dts | 8 +++----- arch/powerpc/boot/ebony.c | 1 + 5 files changed, 71 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/boot/44x.c b/arch/powerpc/boot/44x.c index bc3f570ff9ba..9f64e840bef6 100644 --- a/arch/powerpc/boot/44x.c +++ b/arch/powerpc/boot/44x.c @@ -54,3 +54,32 @@ void ibm44x_dbcr_reset(void) ); } + +/* Read 4xx EBC bus bridge registers to get mappings of the peripheral + * banks into the OPB address space */ +void ibm4xx_fixup_ebc_ranges(const char *ebc) +{ + void *devp; + u32 bxcr; + u32 ranges[EBC_NUM_BANKS*4]; + u32 *p = ranges; + int i; + + for (i = 0; i < EBC_NUM_BANKS; i++) { + mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i)); + bxcr = mfdcr(DCRN_EBC0_CFGDATA); + + if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) { + *p++ = i; + *p++ = 0; + *p++ = bxcr & EBC_BXCR_BAS; + *p++ = EBC_BXCR_BANK_SIZE(bxcr); + } + } + + devp = finddevice(ebc); + if (! devp) + fatal("Couldn't locate EBC node %s\n\r", ebc); + + setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); +} diff --git a/arch/powerpc/boot/44x.h b/arch/powerpc/boot/44x.h index 0da4abf390ad..577982c9a3cd 100644 --- a/arch/powerpc/boot/44x.h +++ b/arch/powerpc/boot/44x.h @@ -11,6 +11,7 @@ #define _PPC_BOOT_44X_H_ void ibm44x_fixup_memsize(void); +void ibm4xx_fixup_ebc_ranges(const char *ebc); void ibm44x_dbcr_reset(void); void ebony_init(void *mac0, void *mac1); diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 877bc97b1e97..14b44aa96fea 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -26,6 +26,43 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2C #define SDRAM_CONFIG_BANK_SIZE(reg) \ (0x00400000 << ((reg & SDRAM_CONFIG_SIZE_MASK) >> 17)) +/* 440GP External Bus Controller (EBC) */ +#define DCRN_EBC0_CFGADDR 0x012 +#define DCRN_EBC0_CFGDATA 0x013 +#define EBC_NUM_BANKS 8 +#define EBC_B0CR 0x00 +#define EBC_B1CR 0x01 +#define EBC_B2CR 0x02 +#define EBC_B3CR 0x03 +#define EBC_B4CR 0x04 +#define EBC_B5CR 0x05 +#define EBC_B6CR 0x06 +#define EBC_B7CR 0x07 +#define EBC_BXCR(n) (n) +#define EBC_BXCR_BAS 0xfff00000 +#define EBC_BXCR_BS 0x000e0000 +#define EBC_BXCR_BANK_SIZE(reg) \ + (0x100000 << (((reg) & EBC_BXCR_BS) >> 17)) +#define EBC_BXCR_BU 0x00018000 +#define EBC_BXCR_BU_OFF 0x00000000 +#define EBC_BXCR_BU_RO 0x00008000 +#define EBC_BXCR_BU_WO 0x00010000 +#define EBC_BXCR_BU_RW 0x00018000 +#define EBC_BXCR_BW 0x00006000 +#define EBC_B0AP 0x10 +#define EBC_B1AP 0x11 +#define EBC_B2AP 0x12 +#define EBC_B3AP 0x13 +#define EBC_B4AP 0x14 +#define EBC_B5AP 0x15 +#define EBC_B6AP 0x16 +#define EBC_B7AP 0x17 +#define EBC_BXAP(n) (0x10+(n)) +#define EBC_BEAR 0x20 +#define EBC_BESR 0x21 +#define EBC_CFG 0x23 +#define EBC_CID 0x24 + /* 440GP Clock, PM, chip control */ #define DCRN_CPC0_SR 0x0b0 #define DCRN_CPC0_ER 0x0b1 diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index 0ec02f4726b5..586a2fc13c63 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -135,11 +135,9 @@ #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; // Filled in by zImage - ranges = <0 00000000 fff00000 100000 - 1 00000000 48000000 100000 - 2 00000000 ff800000 400000 - 3 00000000 48200000 100000 - 7 00000000 48300000 100000>; + // ranges property is supplied by zImage + // based on firmware's configuration of the + // EBC bridge interrupts = <5 4>; interrupt-parent = <&UIC1>; diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c index 634985802006..75daedafd0a4 100644 --- a/arch/powerpc/boot/ebony.c +++ b/arch/powerpc/boot/ebony.c @@ -100,6 +100,7 @@ static void ebony_fixups(void) ibm440gp_fixup_clocks(sysclk, 6 * 1843200); ibm44x_fixup_memsize(); dt_fixup_mac_addresses(ebony_mac0, ebony_mac1); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); } void ebony_init(void *mac0, void *mac1) -- cgit v1.2.2