From aee4467b5ce5047401efb4175b1360ec1734affc Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 1 Feb 2010 11:33:22 +0900 Subject: sh: Fix up large system memory handling for SH7780 PCI. For systems that have more than 512MB we need to set up an additional mapping, this fixes up the rounding to the next power of two and splits out the mapping accordingly between the two local bus mapping windows. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-sh7780.c | 34 ++++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 40531cd367b7..8405c8fded6f 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "pci-sh4.h" #include #include @@ -59,7 +60,11 @@ static int __init sh7780_pci_init(void) __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST, chan->reg_base + SH4_PCICR); - /* Wait for it to come back up.. */ + /* + * Wait for it to come back up. The spec says to allow for up to + * 1 second after toggling the reset pin, but in practice 100ms + * is more than enough. + */ mdelay(100); id = __raw_readw(chan->reg_base + PCI_VENDOR_ID); @@ -90,17 +95,34 @@ static int __init sh7780_pci_init(void) */ __raw_writel(SH4_PCICR_PREFIX, chan->reg_base + SH4_PCICR); + __raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0); + memphys = __pa(memory_start); - memsize = memory_end - memory_start; + memsize = roundup_pow_of_two(memory_end - memory_start); /* - * Set IO and Mem windows to local address - * Make PCI and local address the same for easy 1 to 1 mapping + * If there's more than 512MB of memory, we need to roll over to + * LAR1/LSR1. */ - __raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0); + if (memsize > SZ_512M) { + __raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1); + __raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1, + chan->reg_base + SH4_PCILSR1); + memsize = SZ_512M; + } else { + /* + * Otherwise just zero it out and disable it. + */ + __raw_writel(0, chan->reg_base + SH4_PCILAR1); + __raw_writel(0, chan->reg_base + SH4_PCILSR1); + } + /* + * LAR0/LSR0 covers up to the first 512MB, which is enough to + * cover all of lowmem on most platforms. + */ __raw_writel(memphys, chan->reg_base + SH4_PCILAR0); - __raw_writel((memsize - 1) << 9 | 1, + __raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1, chan->reg_base + SH4_PCILSR0); /* Clear out PCI arbiter IRQs */ -- cgit v1.2.2