From 0b6dd8a640fbaf73b74949b6dc2be50263532576 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 18 Dec 2006 10:31:32 +0000 Subject: [WATCHDOG] s3c2410_wdt exit driver via labels Cleanup the s3c2410_wdt driver's exit point by using labels instead of multiple returns. Also remove the checks for the resources having been allocate in the exit, as we will now either have fully allocated or not allocated the resources at-all. Signed-off-by: Ben Dooks Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/s3c2410_wdt.c | 58 ++++++++++++++++++++++--------------- 1 file changed, 34 insertions(+), 24 deletions(-) diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index 18cb050c3862..d3c073787f5b 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -366,13 +366,15 @@ static int s3c2410wdt_probe(struct platform_device *pdev) wdt_mem = request_mem_region(res->start, size, pdev->name); if (wdt_mem == NULL) { printk(KERN_INFO PFX "failed to get memory region\n"); - return -ENOENT; + ret = -ENOENT; + goto err_req; } wdt_base = ioremap(res->start, size); if (wdt_base == 0) { printk(KERN_INFO PFX "failed to ioremap() region\n"); - return -EINVAL; + ret = -EINVAL; + goto err_req; } DBG("probe: mapped wdt_base=%p\n", wdt_base); @@ -380,22 +382,21 @@ static int s3c2410wdt_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) { printk(KERN_INFO PFX "failed to get irq resource\n"); - iounmap(wdt_base); - return -ENOENT; + ret = -ENOENT; + goto err_map; } ret = request_irq(res->start, s3c2410wdt_irq, 0, pdev->name, pdev); if (ret != 0) { printk(KERN_INFO PFX "failed to install irq (%d)\n", ret); - iounmap(wdt_base); - return ret; + goto err_map; } wdt_clock = clk_get(&pdev->dev, "watchdog"); if (wdt_clock == NULL) { printk(KERN_INFO PFX "failed to find watchdog clock source\n"); - iounmap(wdt_base); - return -ENOENT; + ret = -ENOENT; + goto err_irq; } clk_enable(wdt_clock); @@ -418,8 +419,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) if (ret) { printk (KERN_ERR PFX "cannot register miscdev on minor=%d (%d)\n", WATCHDOG_MINOR, ret); - iounmap(wdt_base); - return ret; + goto err_clk; } if (tmr_atboot && started == 0) { @@ -434,26 +434,36 @@ static int s3c2410wdt_probe(struct platform_device *pdev) } return 0; + + err_clk: + clk_disable(wdt_clock); + clk_put(wdt_clock); + + err_irq: + free_irq(wdt_irq->start, pdev); + + err_map: + iounmap(wdt_base); + + err_req: + release_resource(wdt_mem); + kfree(wdt_mem); + + return ret; } static int s3c2410wdt_remove(struct platform_device *dev) { - if (wdt_mem != NULL) { - release_resource(wdt_mem); - kfree(wdt_mem); - wdt_mem = NULL; - } + release_resource(wdt_mem); + kfree(wdt_mem); + wdt_mem = NULL; - if (wdt_irq != NULL) { - free_irq(wdt_irq->start, dev); - wdt_irq = NULL; - } + free_irq(wdt_irq->start, dev); + wdt_irq = NULL; - if (wdt_clock != NULL) { - clk_disable(wdt_clock); - clk_put(wdt_clock); - wdt_clock = NULL; - } + clk_disable(wdt_clock); + clk_put(wdt_clock); + wdt_clock = NULL; iounmap(wdt_base); misc_deregister(&s3c2410wdt_miscdev); -- cgit v1.2.2 From 9cd446198e7646431a7f2ce7dbeec8df9f77012b Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 19 Dec 2006 17:51:44 +0900 Subject: [WATCHDOG] fix clk_get() error check The return value of clk_get() should be checked by IS_ERR(). Signed-off-by: Akinobu Mita Signed-off-by: Ben Dooks Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/pnx4008_wdt.c | 3 ++- drivers/char/watchdog/s3c2410_wdt.c | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/char/watchdog/pnx4008_wdt.c b/drivers/char/watchdog/pnx4008_wdt.c index 3a55fc6abcd8..0e3d589d6332 100644 --- a/drivers/char/watchdog/pnx4008_wdt.c +++ b/drivers/char/watchdog/pnx4008_wdt.c @@ -283,7 +283,8 @@ static int pnx4008_wdt_probe(struct platform_device *pdev) wdt_base = (void __iomem *)IO_ADDRESS(res->start); wdt_clk = clk_get(&pdev->dev, "wdt_ck"); - if (!wdt_clk) { + if (IS_ERR(wdt_clk)) { + ret = PTR_ERR(wdt_clk); release_resource(wdt_mem); kfree(wdt_mem); goto out; diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index d3c073787f5b..5a5cc2a2c5af 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -393,9 +393,9 @@ static int s3c2410wdt_probe(struct platform_device *pdev) } wdt_clock = clk_get(&pdev->dev, "watchdog"); - if (wdt_clock == NULL) { + if (IS_ERR(wdt_clock)) { printk(KERN_INFO PFX "failed to find watchdog clock source\n"); - ret = -ENOENT; + ret = PTR_ERR(wdt_clock); goto err_irq; } -- cgit v1.2.2 From 39e3a0556a1e2d33f9491d43bae9fdaa09b0308a Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sun, 7 Jan 2007 21:49:11 +0100 Subject: [WATCHDOG] pcwd_pci.c - get heartbeat from dip switches The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/pcwd_pci.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/char/watchdog/pcwd_pci.c b/drivers/char/watchdog/pcwd_pci.c index f4872c871063..059ac9f12de7 100644 --- a/drivers/char/watchdog/pcwd_pci.c +++ b/drivers/char/watchdog/pcwd_pci.c @@ -1,7 +1,7 @@ /* * Berkshire PCI-PC Watchdog Card Driver * - * (c) Copyright 2003-2005 Wim Van Sebroeck . + * (c) Copyright 2003-2007 Wim Van Sebroeck . * * Based on source code of the following authors: * Ken Hollis , @@ -51,8 +51,8 @@ #include /* For inb/outb/... */ /* Module and version information */ -#define WATCHDOG_VERSION "1.02" -#define WATCHDOG_DATE "03 Sep 2005" +#define WATCHDOG_VERSION "1.03" +#define WATCHDOG_DATE "06 Jan 2007" #define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog" #define WATCHDOG_NAME "pcwd_pci" #define PFX WATCHDOG_NAME ": " @@ -96,6 +96,18 @@ #define CMD_WRITE_WATCHDOG_TIMEOUT 0x19 #define CMD_GET_CLEAR_RESET_COUNT 0x84 +/* Watchdog's Dip Switch heartbeat values */ +static const int heartbeat_tbl [] = { + 5, /* OFF-OFF-OFF = 5 Sec */ + 10, /* OFF-OFF-ON = 10 Sec */ + 30, /* OFF-ON-OFF = 30 Sec */ + 60, /* OFF-ON-ON = 1 Min */ + 300, /* ON-OFF-OFF = 5 Min */ + 600, /* ON-OFF-ON = 10 Min */ + 1800, /* ON-ON-OFF = 30 Min */ + 3600, /* ON-ON-ON = 1 hour */ +}; + /* We can only use 1 card due to the /dev/watchdog restriction */ static int cards_found; @@ -119,10 +131,10 @@ static int debug = QUIET; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); -#define WATCHDOG_HEARTBEAT 2 /* 2 sec default heartbeat */ +#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = delay-time from dip-switches */ static int heartbeat = WATCHDOG_HEARTBEAT; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 Date: Sun, 7 Jan 2007 21:57:03 +0100 Subject: [WATCHDOG] pcwd_pci.c - spinlock fixes the keepalive and get_temperature functions should use spinlocks also. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/pcwd_pci.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/char/watchdog/pcwd_pci.c b/drivers/char/watchdog/pcwd_pci.c index 059ac9f12de7..95ddcd8c1db2 100644 --- a/drivers/char/watchdog/pcwd_pci.c +++ b/drivers/char/watchdog/pcwd_pci.c @@ -298,7 +298,9 @@ static int pcipcwd_stop(void) static int pcipcwd_keepalive(void) { /* Re-trigger watchdog by writing to port 0 */ + spin_lock(&pcipcwd_private.io_lock); outb_p(0x42, pcipcwd_private.io_addr); /* send out any data */ + spin_unlock(&pcipcwd_private.io_lock); if (debug >= DEBUG) printk(KERN_DEBUG PFX "Watchdog keepalive signal send\n"); @@ -385,7 +387,9 @@ static int pcipcwd_get_temperature(int *temperature) if (!pcipcwd_private.supports_temp) return -ENODEV; + spin_lock(&pcipcwd_private.io_lock); *temperature = inb_p(pcipcwd_private.io_addr); + spin_unlock(&pcipcwd_private.io_lock); /* * Convert celsius to fahrenheit, since this was @@ -814,6 +818,8 @@ static int __init pcipcwd_init_module(void) static void __exit pcipcwd_cleanup_module(void) { pci_unregister_driver(&pcipcwd_driver); + + printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); } module_init(pcipcwd_init_module); -- cgit v1.2.2 From d26d90967de9d51c08d5821e362cb2245f83c1a8 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Mon, 8 Jan 2007 22:40:33 +0100 Subject: [WATCHDOG] pcwd_usb.c - document includes document and review the include files. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/pcwd_usb.c | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c index 2da5ac99687c..e5c2206c6a18 100644 --- a/drivers/char/watchdog/pcwd_usb.c +++ b/drivers/char/watchdog/pcwd_usb.c @@ -24,26 +24,25 @@ * http://www.berkprod.com/ or http://www.pcwatchdog.com/ */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include /* For module specific items */ +#include /* For new moduleparam's */ +#include /* For standard types (like size_t) */ +#include /* For the -ENODEV/... values */ +#include /* For printk/panic/... */ +#include /* For mdelay function */ +#include /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */ +#include /* For the watchdog specific items */ +#include /* For notifier support */ +#include /* For reboot_notifier stuff */ +#include /* For __init/__exit/... */ +#include /* For file operations */ +#include /* For USB functions */ +#include /* For kmalloc, ... */ +#include /* For mutex locking */ #include /* For HID_REQ_SET_REPORT & HID_DT_REPORT */ +#include /* For copy_to_user/put_user/... */ + #ifdef CONFIG_USB_DEBUG static int debug = 1; -- cgit v1.2.2 From 2ef473de1ee62eb31b6b98885562cdb4389b01dc Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Mon, 8 Jan 2007 22:45:30 +0100 Subject: [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/pcwd_usb.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c index e5c2206c6a18..1ad1f22e97d7 100644 --- a/drivers/char/watchdog/pcwd_usb.c +++ b/drivers/char/watchdog/pcwd_usb.c @@ -1,7 +1,7 @@ /* * Berkshire USB-PC Watchdog Card Driver * - * (c) Copyright 2004 Wim Van Sebroeck . + * (c) Copyright 2004-2007 Wim Van Sebroeck . * * Based on source code of the following authors: * Ken Hollis , @@ -56,8 +56,8 @@ /* Module and Version Information */ -#define DRIVER_VERSION "1.01" -#define DRIVER_DATE "15 Mar 2005" +#define DRIVER_VERSION "1.02" +#define DRIVER_DATE "06 Jan 2007" #define DRIVER_AUTHOR "Wim Van Sebroeck " #define DRIVER_DESC "Berkshire USB-PC Watchdog driver" #define DRIVER_LICENSE "GPL" @@ -74,10 +74,10 @@ MODULE_ALIAS_MISCDEV(TEMP_MINOR); module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug enabled or not"); -#define WATCHDOG_HEARTBEAT 2 /* 2 sec default heartbeat */ +#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = delay-time from dip-switches */ static int heartbeat = WATCHDOG_HEARTBEAT; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 Date: Tue, 9 Jan 2007 22:38:54 +0100 Subject: [WATCHDOG] pcwd.c - e-mail adres update update Simon Machell's e-mail adres Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/pcwd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/watchdog/pcwd.c b/drivers/char/watchdog/pcwd.c index 8e1e6e48e0a7..8251d8378d2e 100644 --- a/drivers/char/watchdog/pcwd.c +++ b/drivers/char/watchdog/pcwd.c @@ -2,7 +2,7 @@ * PC Watchdog Driver * by Ken Hollis (khollis@bitgate.com) * - * Permission granted from Simon Machell (73244.1270@compuserve.com) + * Permission granted from Simon Machell (smachell@berkprod.com) * Written for the Linux Kernel, and GPLed by Ken Hollis * * 960107 Added request_region routines, modulized the whole thing. -- cgit v1.2.2 From f3dc07330c3e43a8d365eaa74693e320e6ed79d9 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Tue, 9 Jan 2007 22:43:49 +0100 Subject: [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/pcwd.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/char/watchdog/pcwd.c b/drivers/char/watchdog/pcwd.c index 8251d8378d2e..aab6621817a0 100644 --- a/drivers/char/watchdog/pcwd.c +++ b/drivers/char/watchdog/pcwd.c @@ -70,8 +70,8 @@ #include /* For inb/outb/... */ /* Module and version information */ -#define WATCHDOG_VERSION "1.17" -#define WATCHDOG_DATE "12 Feb 2006" +#define WATCHDOG_VERSION "1.18" +#define WATCHDOG_DATE "06 Jan 2007" #define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog" #define WATCHDOG_NAME "pcwd" #define PFX WATCHDOG_NAME ": " @@ -132,6 +132,18 @@ #define CMD_ISA_DELAY_TIME_8SECS 0x0C #define CMD_ISA_RESET_RELAYS 0x0D +/* Watchdog's Dip Switch heartbeat values */ +static const int heartbeat_tbl [] = { + 20, /* OFF-OFF-OFF = 20 Sec */ + 40, /* OFF-OFF-ON = 40 Sec */ + 60, /* OFF-ON-OFF = 1 Min */ + 300, /* OFF-ON-ON = 5 Min */ + 600, /* ON-OFF-OFF = 10 Min */ + 1800, /* ON-OFF-ON = 30 Min */ + 3600, /* ON-ON-OFF = 1 Hour */ + 7200, /* ON-ON-ON = 2 hour */ +}; + /* * We are using an kernel timer to do the pinging of the watchdog * every ~500ms. We try to set the internal heartbeat of the @@ -167,10 +179,10 @@ static int debug = QUIET; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); -#define WATCHDOG_HEARTBEAT 60 /* 60 sec default heartbeat */ +#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = delay-time from dip-switches */ static int heartbeat = WATCHDOG_HEARTBEAT; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<=heartbeat<=7200, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<=heartbeat<=7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); @@ -844,6 +856,10 @@ static int __devinit pcwatchdog_init(int base_addr) /* Show info about the card itself */ pcwd_show_card_info(); + /* If heartbeat = 0 then we use the heartbeat from the dip-switches */ + if (heartbeat == 0) + heartbeat = heartbeat_tbl[(pcwd_get_option_switches() & 0x07)]; + /* Check that the heartbeat value is within it's range ; if not reset to the default */ if (pcwd_set_heartbeat(heartbeat)) { pcwd_set_heartbeat(WATCHDOG_HEARTBEAT); -- cgit v1.2.2 From 76c11f0442257099cbb474301f2ffff38649d3d3 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 10 Jan 2007 23:23:44 +0100 Subject: [WATCHDOG] acquirewdt.c - clean before platform_device patches Clean the current code before we convert the driver to a platform_device. This clean consists of: - document the includes - make sure that the printk's use the module/driver-name - do the exit of the module exactly the opposite of the init of the module Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/acquirewdt.c | 74 +++++++++++++++++++++----------------- 1 file changed, 41 insertions(+), 33 deletions(-) diff --git a/drivers/char/watchdog/acquirewdt.c b/drivers/char/watchdog/acquirewdt.c index 154d67e591e5..a968f84c353e 100644 --- a/drivers/char/watchdog/acquirewdt.c +++ b/drivers/char/watchdog/acquirewdt.c @@ -48,46 +48,52 @@ * It can be 1, 2, 10, 20, 110 or 220 seconds. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include +/* + * Includes, defines, variables, module parameters, ... + */ +/* Includes */ +#include /* For module specific items */ +#include /* For new moduleparam's */ +#include /* For standard types (like size_t) */ +#include /* For the -ENODEV/... values */ +#include /* For printk/panic/... */ +#include /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */ +#include /* For the watchdog specific items */ +#include /* For file operations */ +#include /* For io-port access */ +#include /* For reboot notifier */ +#include /* For reboot notifier */ +#include /* For __init/__exit/... */ + +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ + +/* Module information */ +#define DRV_NAME "acquirewdt" +#define PFX DRV_NAME ": " #define WATCHDOG_NAME "Acquire WDT" -#define PFX WATCHDOG_NAME ": " #define WATCHDOG_HEARTBEAT 0 /* There is no way to see what the correct time-out period is */ +/* internal variables */ static unsigned long acq_is_open; static char expect_close; -/* - * You must set these - there is no sane way to probe for this board. - */ - -static int wdt_stop = 0x43; +/* module parameters */ +static int wdt_stop = 0x43; /* You must set this - there is no sane way to probe for this board. */ module_param(wdt_stop, int, 0); MODULE_PARM_DESC(wdt_stop, "Acquire WDT 'stop' io port (default 0x43)"); -static int wdt_start = 0x443; +static int wdt_start = 0x443; /* You must set this - there is no sane way to probe for this board. */ module_param(wdt_start, int, 0); MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* - * Kernel methods. + * Watchdog Operations */ static void acq_keepalive(void) @@ -103,7 +109,7 @@ static void acq_stop(void) } /* - * /dev/watchdog handling. + * /dev/watchdog handling */ static ssize_t acq_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) @@ -143,7 +149,7 @@ static int acq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, { .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .firmware_version = 1, - .identity = "Acquire WDT", + .identity = WATCHDOG_NAME, }; switch(cmd) @@ -240,11 +246,10 @@ static const struct file_operations acq_fops = { .release = acq_close, }; -static struct miscdevice acq_miscdev= -{ - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &acq_fops, +static struct miscdevice acq_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &acq_fops, }; /* @@ -252,11 +257,14 @@ static struct miscdevice acq_miscdev= * turn the timebomb registers off. */ -static struct notifier_block acq_notifier = -{ +static struct notifier_block acq_notifier = { .notifier_call = acq_notify_sys, }; +/* + * Init & exit routines + */ + static int __init acq_init(void) { int ret; @@ -313,9 +321,9 @@ static void __exit acq_exit(void) { misc_deregister(&acq_miscdev); unregister_reboot_notifier(&acq_notifier); + release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); - release_region(wdt_start,1); } module_init(acq_init); -- cgit v1.2.2 From ad5fe323182fd3adab4225c93eae36f3c555a884 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 10 Jan 2007 23:36:13 +0100 Subject: [WATCHDOG] acquirewdt.c - convert to platform_device Convert the acquirewdt watchdog into a platform_device Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/acquirewdt.c | 49 ++++++++++++++++++++++++++++++++++---- 1 file changed, 45 insertions(+), 4 deletions(-) diff --git a/drivers/char/watchdog/acquirewdt.c b/drivers/char/watchdog/acquirewdt.c index a968f84c353e..687b809d49cb 100644 --- a/drivers/char/watchdog/acquirewdt.c +++ b/drivers/char/watchdog/acquirewdt.c @@ -64,6 +64,7 @@ #include /* For io-port access */ #include /* For reboot notifier */ #include /* For reboot notifier */ +#include /* For platform_driver framework */ #include /* For __init/__exit/... */ #include /* For copy_to_user/put_user/... */ @@ -76,6 +77,7 @@ #define WATCHDOG_HEARTBEAT 0 /* There is no way to see what the correct time-out period is */ /* internal variables */ +static struct platform_device *acq_platform_device; /* the watchdog platform device */ static unsigned long acq_is_open; static char expect_close; @@ -265,12 +267,10 @@ static struct notifier_block acq_notifier = { * Init & exit routines */ -static int __init acq_init(void) +static int __devinit acq_probe(struct platform_device *dev) { int ret; - printk(KERN_INFO "WDT driver for Acquire single board computer initialising.\n"); - if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", @@ -317,13 +317,54 @@ out: return ret; } -static void __exit acq_exit(void) +static int __devexit acq_remove(struct platform_device *dev) { misc_deregister(&acq_miscdev); unregister_reboot_notifier(&acq_notifier); release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); + + return 0; +} + +static struct platform_driver acquirewdt_driver = { + .probe = acq_probe, + .remove = __devexit_p(acq_remove), + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + }, +}; + +static int __init acq_init(void) +{ + int err; + + printk(KERN_INFO "WDT driver for Acquire single board computer initialising.\n"); + + err = platform_driver_register(&acquirewdt_driver); + if (err) + return err; + + acq_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + if (IS_ERR(acq_platform_device)) { + err = PTR_ERR(acq_platform_device); + goto unreg_platform_driver; + } + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&acquirewdt_driver); + return err; +} + +static void __exit acq_exit(void) +{ + platform_device_unregister(acq_platform_device); + platform_driver_unregister(&acquirewdt_driver); + printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); } module_init(acq_init); -- cgit v1.2.2 From 98c08e98f8e5af1caf106e9ee3d46f3eb1ba4858 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 10 Jan 2007 23:38:56 +0100 Subject: [WATCHDOG] acquirewdt.c - convert to platform_device part 2 Convert the reboot_notifier into the platform_device's shutdown method Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/acquirewdt.c | 44 +++++++------------------------------- 1 file changed, 8 insertions(+), 36 deletions(-) diff --git a/drivers/char/watchdog/acquirewdt.c b/drivers/char/watchdog/acquirewdt.c index 687b809d49cb..85269c365a10 100644 --- a/drivers/char/watchdog/acquirewdt.c +++ b/drivers/char/watchdog/acquirewdt.c @@ -62,8 +62,6 @@ #include /* For the watchdog specific items */ #include /* For file operations */ #include /* For io-port access */ -#include /* For reboot notifier */ -#include /* For reboot notifier */ #include /* For platform_driver framework */ #include /* For __init/__exit/... */ @@ -221,20 +219,6 @@ static int acq_close(struct inode *inode, struct file *file) return 0; } -/* - * Notifier for system down - */ - -static int acq_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) -{ - if(code==SYS_DOWN || code==SYS_HALT) { - /* Turn the WDT off */ - acq_stop(); - } - return NOTIFY_DONE; -} - /* * Kernel Interfaces */ @@ -254,15 +238,6 @@ static struct miscdevice acq_miscdev = { .fops = &acq_fops, }; -/* - * The WDT card needs to learn about soft shutdowns in order to - * turn the timebomb registers off. - */ - -static struct notifier_block acq_notifier = { - .notifier_call = acq_notify_sys, -}; - /* * Init & exit routines */ @@ -287,18 +262,11 @@ static int __devinit acq_probe(struct platform_device *dev) goto unreg_stop; } - ret = register_reboot_notifier(&acq_notifier); - if (ret != 0) { - printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); - goto unreg_regions; - } - ret = misc_register(&acq_miscdev); if (ret != 0) { printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret); - goto unreg_reboot; + goto unreg_regions; } printk (KERN_INFO PFX "initialized. (nowayout=%d)\n", @@ -306,8 +274,6 @@ static int __devinit acq_probe(struct platform_device *dev) return 0; -unreg_reboot: - unregister_reboot_notifier(&acq_notifier); unreg_regions: release_region(wdt_start, 1); unreg_stop: @@ -320,7 +286,6 @@ out: static int __devexit acq_remove(struct platform_device *dev) { misc_deregister(&acq_miscdev); - unregister_reboot_notifier(&acq_notifier); release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); @@ -328,9 +293,16 @@ static int __devexit acq_remove(struct platform_device *dev) return 0; } +static void acq_shutdown(struct platform_device *dev) +{ + /* Turn the WDT off if we have a soft shutdown */ + acq_stop(); +} + static struct platform_driver acquirewdt_driver = { .probe = acq_probe, .remove = __devexit_p(acq_remove), + .shutdown = acq_shutdown, .driver = { .owner = THIS_MODULE, .name = DRV_NAME, -- cgit v1.2.2 From 1d747be647c2239e39a9b5faa138c1e36222b37e Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 11 Jan 2007 22:19:28 +0100 Subject: [WATCHDOG] advantechwdt.c - cleanup before platform_device patches This cleanup consists of: - make sure that the printk's use the module/driver-name - do the exit of the module exactly the opposite of the init of the module Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/advantechwdt.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/char/watchdog/advantechwdt.c b/drivers/char/watchdog/advantechwdt.c index 9d732769ba01..6c919797591a 100644 --- a/drivers/char/watchdog/advantechwdt.c +++ b/drivers/char/watchdog/advantechwdt.c @@ -43,8 +43,9 @@ #include #include +#define DRV_NAME "advantechwdt" +#define PFX DRV_NAME ": " #define WATCHDOG_NAME "Advantech WDT" -#define PFX WATCHDOG_NAME ": " #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ static unsigned long advwdt_is_open; @@ -75,10 +76,10 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=63, defaul static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* - * Kernel methods. + * Watchdog Operations */ static void @@ -94,6 +95,10 @@ advwdt_disable(void) inb_p(wdt_stop); } +/* + * /dev/watchdog handling + */ + static ssize_t advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { @@ -126,7 +131,7 @@ advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, static struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, .firmware_version = 1, - .identity = "Advantech WDT", + .identity = WATCHDOG_NAME, }; switch (cmd) { @@ -237,9 +242,9 @@ static const struct file_operations advwdt_fops = { }; static struct miscdevice advwdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &advwdt_fops, + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &advwdt_fops, }; /* @@ -251,6 +256,10 @@ static struct notifier_block advwdt_notifier = { .notifier_call = advwdt_notify_sys, }; +/* + * Init & exit routines + */ + static int __init advwdt_init(void) { @@ -314,9 +323,9 @@ advwdt_exit(void) { misc_deregister(&advwdt_miscdev); unregister_reboot_notifier(&advwdt_notifier); + release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); - release_region(wdt_start,1); } module_init(advwdt_init); -- cgit v1.2.2 From 0349a363e23a0533e081ca320c837bc08247343e Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 11 Jan 2007 22:27:51 +0100 Subject: [WATCHDOG] advantechwdt.c - move set_heartbeat to a seperate function Put the set_heartbeat/timeout code into a seperate function Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/advantechwdt.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/char/watchdog/advantechwdt.c b/drivers/char/watchdog/advantechwdt.c index 6c919797591a..216af0d67fd2 100644 --- a/drivers/char/watchdog/advantechwdt.c +++ b/drivers/char/watchdog/advantechwdt.c @@ -95,6 +95,16 @@ advwdt_disable(void) inb_p(wdt_stop); } +static int +advwdt_set_heartbeat(int t) +{ + if ((t < 1) || (t > 63)) + return -EINVAL; + + timeout = t; + return 0; +} + /* * /dev/watchdog handling */ @@ -151,9 +161,8 @@ advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, case WDIOC_SETTIMEOUT: if (get_user(new_timeout, p)) return -EFAULT; - if ((new_timeout < 1) || (new_timeout > 63)) + if (advwdt_set_heartbeat(new_timeout)) return -EINVAL; - timeout = new_timeout; advwdt_ping(); /* Fall */ @@ -267,12 +276,6 @@ advwdt_init(void) printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n"); - if (timeout < 1 || timeout > 63) { - timeout = WATCHDOG_TIMEOUT; - printk (KERN_INFO PFX "timeout value must be 1<=x<=63, using %d\n", - timeout); - } - if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", @@ -289,6 +292,13 @@ advwdt_init(void) goto unreg_stop; } + /* Check that the heartbeat value is within it's range ; if not reset to the default */ + if (advwdt_set_heartbeat(timeout)) { + advwdt_set_heartbeat(WATCHDOG_TIMEOUT); + printk (KERN_INFO PFX "timeout value must be 1<=x<=63, using %d\n", + timeout); + } + ret = register_reboot_notifier(&advwdt_notifier); if (ret != 0) { printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", -- cgit v1.2.2 From c2bd11c7cbba45c3a1d850a8a29855cb4d61654c Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 11 Jan 2007 22:35:40 +0100 Subject: [WATCHDOG] advantechwdt.c - convert to platform_device Convert the advantechwdt watchdog into a platform_device Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/advantechwdt.c | 55 ++++++++++++++++++++++++++++++++---- 1 file changed, 49 insertions(+), 6 deletions(-) diff --git a/drivers/char/watchdog/advantechwdt.c b/drivers/char/watchdog/advantechwdt.c index 216af0d67fd2..528a417856c4 100644 --- a/drivers/char/watchdog/advantechwdt.c +++ b/drivers/char/watchdog/advantechwdt.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -48,6 +49,7 @@ #define WATCHDOG_NAME "Advantech WDT" #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ +static struct platform_device *advwdt_platform_device; /* the watchdog platform device */ static unsigned long advwdt_is_open; static char adv_expect_close; @@ -269,13 +271,11 @@ static struct notifier_block advwdt_notifier = { * Init & exit routines */ -static int __init -advwdt_init(void) +static int __devinit +advwdt_probe(struct platform_device *dev) { int ret; - printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n"); - if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", @@ -328,14 +328,57 @@ unreg_stop: goto out; } -static void __exit -advwdt_exit(void) +static int __devexit +advwdt_remove(struct platform_device *dev) { misc_deregister(&advwdt_miscdev); unregister_reboot_notifier(&advwdt_notifier); release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); + + return 0; +} + +static struct platform_driver advwdt_driver = { + .probe = advwdt_probe, + .remove = __devexit_p(advwdt_remove), + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + }, +}; + +static int __init +advwdt_init(void) +{ + int err; + + printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n"); + + err = platform_driver_register(&advwdt_driver); + if (err) + return err; + + advwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + if (IS_ERR(advwdt_platform_device)) { + err = PTR_ERR(advwdt_platform_device); + goto unreg_platform_driver; + } + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&advwdt_driver); + return err; +} + +static void __exit +advwdt_exit(void) +{ + platform_device_unregister(advwdt_platform_device); + platform_driver_unregister(&advwdt_driver); + printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); } module_init(advwdt_init); -- cgit v1.2.2 From 2e9c9cf44b17ef5fa1f360bc175ed7761daf3428 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 11 Jan 2007 22:42:41 +0100 Subject: [WATCHDOG] advantechwdt.c - convert to platform_device part 2 Convert the reboot_notifier into the platform_device's shutdown method Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/advantechwdt.c | 46 +++++++----------------------------- 1 file changed, 9 insertions(+), 37 deletions(-) diff --git a/drivers/char/watchdog/advantechwdt.c b/drivers/char/watchdog/advantechwdt.c index 528a417856c4..8121cc247343 100644 --- a/drivers/char/watchdog/advantechwdt.c +++ b/drivers/char/watchdog/advantechwdt.c @@ -35,8 +35,6 @@ #include #include #include -#include -#include #include #include @@ -224,21 +222,6 @@ advwdt_close(struct inode *inode, struct file *file) return 0; } -/* - * Notifier for system down - */ - -static int -advwdt_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) -{ - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ - advwdt_disable(); - } - return NOTIFY_DONE; -} - /* * Kernel Interfaces */ @@ -258,15 +241,6 @@ static struct miscdevice advwdt_miscdev = { .fops = &advwdt_fops, }; -/* - * The WDT needs to learn about soft shutdowns in order to - * turn the timebomb registers off. - */ - -static struct notifier_block advwdt_notifier = { - .notifier_call = advwdt_notify_sys, -}; - /* * Init & exit routines */ @@ -299,18 +273,11 @@ advwdt_probe(struct platform_device *dev) timeout); } - ret = register_reboot_notifier(&advwdt_notifier); - if (ret != 0) { - printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); - goto unreg_regions; - } - ret = misc_register(&advwdt_miscdev); if (ret != 0) { printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret); - goto unreg_reboot; + goto unreg_regions; } printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", @@ -318,8 +285,6 @@ advwdt_probe(struct platform_device *dev) out: return ret; -unreg_reboot: - unregister_reboot_notifier(&advwdt_notifier); unreg_regions: release_region(wdt_start, 1); unreg_stop: @@ -332,7 +297,6 @@ static int __devexit advwdt_remove(struct platform_device *dev) { misc_deregister(&advwdt_miscdev); - unregister_reboot_notifier(&advwdt_notifier); release_region(wdt_start,1); if(wdt_stop != wdt_start) release_region(wdt_stop,1); @@ -340,9 +304,17 @@ advwdt_remove(struct platform_device *dev) return 0; } +static void +advwdt_shutdown(struct platform_device *dev) +{ + /* Turn the WDT off if we have a soft shutdown */ + advwdt_disable(); +} + static struct platform_driver advwdt_driver = { .probe = advwdt_probe, .remove = __devexit_p(advwdt_remove), + .shutdown = advwdt_shutdown, .driver = { .owner = THIS_MODULE, .name = DRV_NAME, -- cgit v1.2.2 From bffda5c87cf60d27a27f2e862c82c474f8e89767 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 20:54:24 +0100 Subject: [WATCHDOG] show default value for nowayout in module parameter change default=CONFIG_WATCHDOG_NOWAYOUT in the module parameter for nowayout by it's real value (0 or 1) by using: __MODULE_STRING(WATCHDOG_NOWAYOUT) Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/alim1535_wdt.c | 2 +- drivers/char/watchdog/alim7101_wdt.c | 2 +- drivers/char/watchdog/eurotechwdt.c | 2 +- drivers/char/watchdog/i6300esb.c | 2 +- drivers/char/watchdog/i8xx_tco.c | 2 +- drivers/char/watchdog/iTCO_wdt.c | 6 +++--- drivers/char/watchdog/ib700wdt.c | 2 +- drivers/char/watchdog/ibmasr.c | 2 +- drivers/char/watchdog/indydog.c | 2 +- drivers/char/watchdog/machzwd.c | 2 +- drivers/char/watchdog/mixcomwd.c | 2 +- drivers/char/watchdog/pc87413_wdt.c | 2 +- drivers/char/watchdog/pcwd.c | 4 ++-- drivers/char/watchdog/pcwd_pci.c | 4 ++-- drivers/char/watchdog/pcwd_usb.c | 4 ++-- drivers/char/watchdog/s3c2410_wdt.c | 2 +- drivers/char/watchdog/sbc60xxwdt.c | 2 +- drivers/char/watchdog/sbc8360.c | 2 +- drivers/char/watchdog/sbc_epx_c3.c | 2 +- drivers/char/watchdog/sc1200wdt.c | 2 +- drivers/char/watchdog/sc520_wdt.c | 2 +- drivers/char/watchdog/smsc37b787_wdt.c | 2 +- drivers/char/watchdog/softdog.c | 2 +- drivers/char/watchdog/w83627hf_wdt.c | 2 +- drivers/char/watchdog/w83697hf_wdt.c | 2 +- drivers/char/watchdog/w83877f_wdt.c | 2 +- drivers/char/watchdog/w83977f_wdt.c | 2 +- drivers/char/watchdog/wafer5823wdt.c | 2 +- drivers/char/watchdog/wdt.c | 2 +- drivers/char/watchdog/wdt977.c | 2 +- drivers/char/watchdog/wdt_pci.c | 2 +- 31 files changed, 36 insertions(+), 36 deletions(-) diff --git a/drivers/char/watchdog/alim1535_wdt.c b/drivers/char/watchdog/alim1535_wdt.c index 01b0d132ee41..e3f6a7d0c83d 100644 --- a/drivers/char/watchdog/alim1535_wdt.c +++ b/drivers/char/watchdog/alim1535_wdt.c @@ -40,7 +40,7 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (0. + * (c) Copyright 2006-2007 Wim Van Sebroeck . * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -49,7 +49,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" #define DRV_VERSION "1.01" -#define DRV_RELDATE "11-Nov-2006" +#define DRV_RELDATE "21-Jan-2007" #define PFX DRV_NAME ": " /* Includes */ @@ -187,7 +187,7 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2" #define DRIVER_DESC "Berkshire USB-PC Watchdog driver" #define DRIVER_LICENSE "GPL" @@ -81,7 +81,7 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 Date: Sat, 27 Jan 2007 21:50:53 +0100 Subject: [WATCHDOG] ib700_wdt.c stop + set_heartbeat operations move the code to stop the watchdog and the code to set the heartbeat of the watchdog to seperate functions. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/ib700wdt.c | 39 ++++++++++++++++++++++++++++++--------- 1 file changed, 30 insertions(+), 9 deletions(-) diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index 0c3c3a3e719d..5510db21090a 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -122,7 +122,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _ /* - * Kernel methods. + * Watchdog Operations */ static void @@ -132,6 +132,31 @@ ibwdt_ping(void) outb_p(wd_margin, WDT_START); } +static void +ibwdt_disable(void) +{ + outb_p(0, WDT_STOP); +} + +static int +ibwdt_set_heartbeat(int t) +{ + int i; + + if ((t < 0) || (t > 30)) + return -EINVAL; + + for (i = 0x0F; i > -1; i--) + if (wd_times[i] > t) + break; + wd_margin = i; + return 0; +} + +/* + * /dev/watchdog handling + */ + static ssize_t ibwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { @@ -159,7 +184,7 @@ static int ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - int i, new_margin; + int new_margin; void __user *argp = (void __user *)arg; int __user *p = argp; @@ -185,12 +210,8 @@ ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, case WDIOC_SETTIMEOUT: if (get_user(new_margin, p)) return -EFAULT; - if ((new_margin < 0) || (new_margin > 30)) + if (ibwdt_set_heartbeat(new_margin)) return -EINVAL; - for (i = 0x0F; i > -1; i--) - if (wd_times[i] > new_margin) - break; - wd_margin = i; ibwdt_ping(); /* Fall */ @@ -226,7 +247,7 @@ ibwdt_close(struct inode *inode, struct file *file) { spin_lock(&ibwdt_lock); if (expect_close == 42) - outb_p(0, WDT_STOP); + ibwdt_disable(); else printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n"); @@ -246,7 +267,7 @@ ibwdt_notify_sys(struct notifier_block *this, unsigned long code, { if (code == SYS_DOWN || code == SYS_HALT) { /* Turn the WDT off */ - outb_p(0, WDT_STOP); + ibwdt_disable(); } return NOTIFY_DONE; } -- cgit v1.2.2 From f6e4803969ee93bef6aeeb6aff0f9214547d1bb1 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 21:58:08 +0100 Subject: [WATCHDOG] ib700wdt.c clean-up init and exit routines clean-up the init and exit routines so that they use the same sequence. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/ib700wdt.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index 5510db21090a..d379bf075264 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -300,6 +300,10 @@ static struct notifier_block ibwdt_notifier = { .notifier_call = ibwdt_notify_sys, }; +/* + * Init & exit routines + */ + static int __init ibwdt_init(void) { int res; @@ -307,11 +311,6 @@ static int __init ibwdt_init(void) printk(KERN_INFO PFX "WDT driver for IB700 single board computer initialising.\n"); spin_lock_init(&ibwdt_lock); - res = misc_register(&ibwdt_miscdev); - if (res) { - printk (KERN_ERR PFX "failed to register misc device\n"); - goto out_nomisc; - } #if WDT_START != WDT_STOP if (!request_region(WDT_STOP, 1, "IB700 WDT")) { @@ -326,13 +325,22 @@ static int __init ibwdt_init(void) res = -EIO; goto out_nostartreg; } + res = register_reboot_notifier(&ibwdt_notifier); if (res) { printk (KERN_ERR PFX "Failed to register reboot notifier.\n"); goto out_noreboot; } + + res = misc_register(&ibwdt_miscdev); + if (res) { + printk (KERN_ERR PFX "failed to register misc device\n"); + goto out_nomisc; + } return 0; +out_nomisc: + unregister_reboot_notifier(&ibwdt_notifier); out_noreboot: release_region(WDT_START, 1); out_nostartreg: @@ -340,8 +348,6 @@ out_nostartreg: release_region(WDT_STOP, 1); #endif out_nostopreg: - misc_deregister(&ibwdt_miscdev); -out_nomisc: return res; } @@ -350,10 +356,10 @@ ibwdt_exit(void) { misc_deregister(&ibwdt_miscdev); unregister_reboot_notifier(&ibwdt_notifier); + release_region(WDT_START,1); #if WDT_START != WDT_STOP release_region(WDT_STOP,1); #endif - release_region(WDT_START,1); } module_init(ibwdt_init); -- cgit v1.2.2 From c9d7710ea2b497784314a916a39d4d390855a557 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 22:07:03 +0100 Subject: [WATCHDOG] ib700wdt.c small clean-up's * Fix identation * Add watchdog "mandatory" WDIOC_GETBOOTSTATUS ioctl * On unexpected close -> since this is considered as a write to the watchdog device, make sure we ping a last time. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/ib700wdt.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index d379bf075264..3cec6790893e 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -3,8 +3,8 @@ * * (c) Copyright 2001 Charles Howes * - * Based on advantechwdt.c which is based on acquirewdt.c which - * is based on wdt.c. + * Based on advantechwdt.c which is based on acquirewdt.c which + * is based on wdt.c. * * (c) Copyright 2000-2001 Marek Michalkiewicz * @@ -25,9 +25,9 @@ * * (c) Copyright 1995 Alan Cox * - * 14-Dec-2001 Matt Domsch - * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT - * Added timeout module option to override default + * 14-Dec-2001 Matt Domsch + * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * Added timeout module option to override default * */ @@ -201,6 +201,7 @@ ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, break; case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: return put_user(0, p); case WDIOC_KEEPALIVE: @@ -246,11 +247,12 @@ static int ibwdt_close(struct inode *inode, struct file *file) { spin_lock(&ibwdt_lock); - if (expect_close == 42) + if (expect_close == 42) { ibwdt_disable(); - else + } else { printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n"); - + ibwdt_ping(); + } clear_bit(0, &ibwdt_is_open); expect_close = 0; spin_unlock(&ibwdt_lock); -- cgit v1.2.2 From e42162a46d948769c8b45d25ee81827bc7dac435 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 22:12:54 +0100 Subject: [WATCHDOG] ib700wdt.c spinlock/WDIOC_SETOPTIONS changes Add the WDIOC_SETOPTIONS ioctl call. Because of this we move the spinlocking to the different watchdog operations. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/ib700wdt.c | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index 3cec6790893e..be61e4755891 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -128,14 +128,20 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _ static void ibwdt_ping(void) { + spin_lock(&ibwdt_lock); + /* Write a watchdog value */ outb_p(wd_margin, WDT_START); + + spin_unlock(&ibwdt_lock); } static void ibwdt_disable(void) { + spin_lock(&ibwdt_lock); outb_p(0, WDT_STOP); + spin_unlock(&ibwdt_lock); } static int @@ -218,7 +224,26 @@ ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: return put_user(wd_times[wd_margin], p); - break; + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + ibwdt_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + ibwdt_ping(); + retval = 0; + } + + return retval; + } default: return -ENOTTY; @@ -229,9 +254,7 @@ ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, static int ibwdt_open(struct inode *inode, struct file *file) { - spin_lock(&ibwdt_lock); if (test_and_set_bit(0, &ibwdt_is_open)) { - spin_unlock(&ibwdt_lock); return -EBUSY; } if (nowayout) @@ -239,14 +262,12 @@ ibwdt_open(struct inode *inode, struct file *file) /* Activate */ ibwdt_ping(); - spin_unlock(&ibwdt_lock); return nonseekable_open(inode, file); } static int ibwdt_close(struct inode *inode, struct file *file) { - spin_lock(&ibwdt_lock); if (expect_close == 42) { ibwdt_disable(); } else { @@ -255,7 +276,6 @@ ibwdt_close(struct inode *inode, struct file *file) } clear_bit(0, &ibwdt_is_open); expect_close = 0; - spin_unlock(&ibwdt_lock); return 0; } -- cgit v1.2.2 From 745ac1ea6e06125cc1326adbec34d756b25678c6 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 22:39:46 +0100 Subject: [WATCHDOG] ib700wdt.c - convert to platform_device Convert the ib700wdt watchdog into a platform_device Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/ib700wdt.c | 53 +++++++++++++++++++++++++++++++++++----- 1 file changed, 47 insertions(+), 6 deletions(-) diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index be61e4755891..b74e15159c02 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -42,16 +42,20 @@ #include #include #include +#include #include #include #include +static struct platform_device *ibwdt_platform_device; static unsigned long ibwdt_is_open; static spinlock_t ibwdt_lock; static char expect_close; -#define PFX "ib700wdt: " +/* Module information */ +#define DRV_NAME "ib700wdt" +#define PFX DRV_NAME ": " /* * @@ -326,12 +330,10 @@ static struct notifier_block ibwdt_notifier = { * Init & exit routines */ -static int __init ibwdt_init(void) +static int __devinit ibwdt_probe(struct platform_device *dev) { int res; - printk(KERN_INFO PFX "WDT driver for IB700 single board computer initialising.\n"); - spin_lock_init(&ibwdt_lock); #if WDT_START != WDT_STOP @@ -373,8 +375,7 @@ out_nostopreg: return res; } -static void __exit -ibwdt_exit(void) +static int __devexit ibwdt_remove(struct platform_device *dev) { misc_deregister(&ibwdt_miscdev); unregister_reboot_notifier(&ibwdt_notifier); @@ -382,6 +383,46 @@ ibwdt_exit(void) #if WDT_START != WDT_STOP release_region(WDT_STOP,1); #endif + return 0; +} + +static struct platform_driver ibwdt_driver = { + .probe = ibwdt_probe, + .remove = __devexit_p(ibwdt_remove), + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + }, +}; + +static int __init ibwdt_init(void) +{ + int err; + + printk(KERN_INFO PFX "WDT driver for IB700 single board computer initialising.\n"); + + err = platform_driver_register(&ibwdt_driver); + if (err) + return err; + + ibwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + if (IS_ERR(ibwdt_platform_device)) { + err = PTR_ERR(ibwdt_platform_device); + goto unreg_platform_driver; + } + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&ibwdt_driver); + return err; +} + +static void __exit ibwdt_exit(void) +{ + platform_device_unregister(ibwdt_platform_device); + platform_driver_unregister(&ibwdt_driver); + printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); } module_init(ibwdt_init); -- cgit v1.2.2 From 35fcf53870eaa6cc966604a6e36df1c2c1577540 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 27 Jan 2007 22:54:18 +0100 Subject: [WATCHDOG] ib700wdt.c - convert to platform_device part 2 Convert the reboot_notifier into the platform_device's shutdown method Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/ib700wdt.c | 42 +++++++--------------------------------- 1 file changed, 7 insertions(+), 35 deletions(-) diff --git a/drivers/char/watchdog/ib700wdt.c b/drivers/char/watchdog/ib700wdt.c index b74e15159c02..c3a60f52ccb9 100644 --- a/drivers/char/watchdog/ib700wdt.c +++ b/drivers/char/watchdog/ib700wdt.c @@ -36,9 +36,7 @@ #include #include #include -#include #include -#include #include #include #include @@ -283,21 +281,6 @@ ibwdt_close(struct inode *inode, struct file *file) return 0; } -/* - * Notifier for system down - */ - -static int -ibwdt_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) -{ - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ - ibwdt_disable(); - } - return NOTIFY_DONE; -} - /* * Kernel Interfaces */ @@ -317,15 +300,6 @@ static struct miscdevice ibwdt_miscdev = { .fops = &ibwdt_fops, }; -/* - * The WDT needs to learn about soft shutdowns in order to - * turn the timebomb registers off. - */ - -static struct notifier_block ibwdt_notifier = { - .notifier_call = ibwdt_notify_sys, -}; - /* * Init & exit routines */ @@ -350,12 +324,6 @@ static int __devinit ibwdt_probe(struct platform_device *dev) goto out_nostartreg; } - res = register_reboot_notifier(&ibwdt_notifier); - if (res) { - printk (KERN_ERR PFX "Failed to register reboot notifier.\n"); - goto out_noreboot; - } - res = misc_register(&ibwdt_miscdev); if (res) { printk (KERN_ERR PFX "failed to register misc device\n"); @@ -364,8 +332,6 @@ static int __devinit ibwdt_probe(struct platform_device *dev) return 0; out_nomisc: - unregister_reboot_notifier(&ibwdt_notifier); -out_noreboot: release_region(WDT_START, 1); out_nostartreg: #if WDT_START != WDT_STOP @@ -378,7 +344,6 @@ out_nostopreg: static int __devexit ibwdt_remove(struct platform_device *dev) { misc_deregister(&ibwdt_miscdev); - unregister_reboot_notifier(&ibwdt_notifier); release_region(WDT_START,1); #if WDT_START != WDT_STOP release_region(WDT_STOP,1); @@ -386,9 +351,16 @@ static int __devexit ibwdt_remove(struct platform_device *dev) return 0; } +static void ibwdt_shutdown(struct platform_device *dev) +{ + /* Turn the WDT off if we have a soft shutdown */ + ibwdt_disable(); +} + static struct platform_driver ibwdt_driver = { .probe = ibwdt_probe, .remove = __devexit_p(ibwdt_remove), + .shutdown = ibwdt_shutdown, .driver = { .owner = THIS_MODULE, .name = DRV_NAME, -- cgit v1.2.2 From 87f440e70e07dace7db130f2f9fcea3f132aad8f Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 7 Feb 2007 00:29:46 +0000 Subject: [CIFS] Additional POSIX CIFS Extensions infolevels also includes cleanup of whitespace/80 columns Signed-off-by: Steve French --- fs/cifs/cifspdu.h | 69 ++++++++++++++++++++++++++++++++++++------------------- 1 file changed, 46 insertions(+), 23 deletions(-) diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 068ef51edbf7..2920ea0527f5 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -1,7 +1,7 @@ /* * fs/cifs/cifspdu.h * - * Copyright (c) International Business Machines Corp., 2002,2005 + * Copyright (c) International Business Machines Corp., 2002,2007 * Author(s): Steve French (sfrench@us.ibm.com) * * This library is free software; you can redistribute it and/or modify @@ -544,7 +544,8 @@ typedef union smb_com_session_setup_andx { /* unsigned char * NativeOS; */ /* unsigned char * NativeLanMan; */ /* unsigned char * PrimaryDomain; */ - } __attribute__((packed)) resp; /* NTLM response with or without extended sec*/ + } __attribute__((packed)) resp; /* NTLM response + (with or without extended sec) */ struct { /* request format */ struct smb_hdr hdr; /* wct = 10 */ @@ -1352,11 +1353,13 @@ struct smb_t2_rsp { #define SMB_QUERY_FILE_UNIX_BASIC 0x200 #define SMB_QUERY_FILE_UNIX_LINK 0x201 #define SMB_QUERY_POSIX_ACL 0x204 -#define SMB_QUERY_XATTR 0x205 +#define SMB_QUERY_XATTR 0x205 /* e.g. system EA name space */ #define SMB_QUERY_ATTR_FLAGS 0x206 /* append,immutable etc. */ #define SMB_QUERY_POSIX_PERMISSION 0x207 #define SMB_QUERY_POSIX_LOCK 0x208 -/* #define SMB_POSIX_OPEN 0x209 */ +/* #define SMB_POSIX_OPEN 0x209 */ +/* #define SMB_POSIX_UNLINK 0x20a */ +#define SMB_QUERY_FILE__UNIX_INFO2 0x20b #define SMB_QUERY_FILE_INTERNAL_INFO 0x3ee #define SMB_QUERY_FILE_ACCESS_INFO 0x3f0 #define SMB_QUERY_FILE_NAME_INFO2 0x3f1 /* 0x30 bytes */ @@ -1377,8 +1380,10 @@ struct smb_t2_rsp { #define SMB_SET_ATTR_FLAGS 0x206 /* append, immutable etc. */ #define SMB_SET_POSIX_LOCK 0x208 #define SMB_POSIX_OPEN 0x209 +#define SMB_POSIX_UNLINK 0x20a +#define SMB_SET_FILE_UNIX_INFO2 #define SMB_SET_FILE_BASIC_INFO2 0x3ec -#define SMB_SET_FILE_RENAME_INFORMATION 0x3f2 /* BB check if qpathinfo level too */ +#define SMB_SET_FILE_RENAME_INFORMATION 0x3f2 /* BB check if qpathinfo too */ #define SMB_FILE_ALL_INFO2 0x3fa #define SMB_SET_FILE_ALLOCATION_INFO2 0x3fb #define SMB_SET_FILE_END_OF_FILE_INFO2 0x3fc @@ -1428,7 +1433,7 @@ typedef struct smb_com_transaction2_qpi_rsp { struct smb_hdr hdr; /* wct = 10 + SetupCount */ struct trans2_resp t2; __u16 ByteCount; - __u16 Reserved2; /* parameter word reserved - present for infolevels > 100 */ + __u16 Reserved2; /* parameter word is present for infolevels > 100 */ } __attribute__((packed)) TRANSACTION2_QPI_RSP; typedef struct smb_com_transaction2_spi_req { @@ -1461,7 +1466,7 @@ typedef struct smb_com_transaction2_spi_rsp { struct smb_hdr hdr; /* wct = 10 + SetupCount */ struct trans2_resp t2; __u16 ByteCount; - __u16 Reserved2; /* parameter word reserved - present for infolevels > 100 */ + __u16 Reserved2; /* parameter word is present for infolevels > 100 */ } __attribute__((packed)) TRANSACTION2_SPI_RSP; struct set_file_rename { @@ -1627,6 +1632,7 @@ typedef struct smb_com_transaction2_fnext_rsp_parms { #define SMB_QUERY_FS_ATTRIBUTE_INFO 0x105 #define SMB_QUERY_CIFS_UNIX_INFO 0x200 #define SMB_QUERY_POSIX_FS_INFO 0x201 +#define SMB_QUERY_POSIX_WHO_AM_I 0x202 #define SMB_QUERY_LABEL_INFO 0x3ea #define SMB_QUERY_FS_QUOTA_INFO 0x3ee #define SMB_QUERY_FS_FULL_SIZE_INFO 0x3ef @@ -1659,9 +1665,21 @@ typedef struct smb_com_transaction_qfsi_rsp { struct smb_hdr hdr; /* wct = 10 + SetupCount */ struct trans2_resp t2; __u16 ByteCount; - __u8 Pad; /* may be three bytes *//* followed by data area */ + __u8 Pad; /* may be three bytes? *//* followed by data area */ } __attribute__((packed)) TRANSACTION2_QFSI_RSP; +typedef struct whoami_rsp_data { /* Query level 0x202 */ + __u32 flags; /* 0 = Authenticated user 1 = GUEST */ + __u32 mask; /* which flags bits server understands ie 0x0001 */ + __u64 unix_user_id; + __u64 unix_user_gid; + __u32 number_of_supplementary_gids; /* may be zero */ + __u32 number_of_sids; /* may be zero */ + __u32 length_of_sid_array; /* in bytes - may be zero */ + __u32 pad; /* reserved - MBZ */ + /* __u64 gid_array[0]; */ /* may be empty */ + /* __u8 * psid_list */ /* may be empty */ +} __attribute__((packed)) WHOAMI_RSP_DATA; /* SETFSInfo Levels */ #define SMB_SET_CIFS_UNIX_INFO 0x200 @@ -1858,8 +1876,11 @@ typedef struct { #define CIFS_UNIX_XATTR_CAP 0x00000004 /* support new namespace */ #define CIFS_UNIX_EXTATTR_CAP 0x00000008 /* support chattr/chflag */ #define CIFS_UNIX_POSIX_PATHNAMES_CAP 0x00000010 /* Allow POSIX path chars */ +#define CIFS_UNIX_POSIX_PATH_OPS_CAP 0x00000020 /* Allow new POSIX path based + calls including posix open + and posix unlink */ #ifdef CONFIG_CIFS_POSIX -#define CIFS_UNIX_CAP_MASK 0x0000001b +#define CIFS_UNIX_CAP_MASK 0x0000003b #else #define CIFS_UNIX_CAP_MASK 0x00000013 #endif /* CONFIG_CIFS_POSIX */ @@ -1946,7 +1967,7 @@ typedef struct { /* data block encoding of response to level 263 QPathInfo */ __le32 AlignmentRequirement; __le32 FileNameLength; char FileName[1]; -} __attribute__((packed)) FILE_ALL_INFO; /* level 0x107 QPathInfo */ +} __attribute__((packed)) FILE_ALL_INFO; /* level 0x107 QPathInfo */ /* defines for enumerating possible values of the Unix type field below */ #define UNIX_FILE 0 @@ -1970,11 +1991,11 @@ typedef struct { __u64 UniqueId; __le64 Permissions; __le64 Nlinks; -} __attribute__((packed)) FILE_UNIX_BASIC_INFO; /* level 0x200 QPathInfo */ +} __attribute__((packed)) FILE_UNIX_BASIC_INFO; /* level 0x200 QPathInfo */ typedef struct { char LinkDest[1]; -} __attribute__((packed)) FILE_UNIX_LINK_INFO; /* level 0x201 QPathInfo */ +} __attribute__((packed)) FILE_UNIX_LINK_INFO; /* level 0x201 QPathInfo */ /* The following three structures are needed only for setting time to NT4 and some older servers via @@ -2011,7 +2032,7 @@ typedef struct { __le64 ChangeTime; __le32 Attributes; __u32 Pad; -} __attribute__((packed)) FILE_BASIC_INFO; /* size info, level 0x101 */ +} __attribute__((packed)) FILE_BASIC_INFO; /* size info, level 0x101 */ struct file_allocation_info { __le64 AllocationSize; /* Note old Samba srvr rounds this up too much */ @@ -2020,7 +2041,7 @@ struct file_allocation_info { struct file_end_of_file_info { __le64 FileSize; /* offset to end of file */ -} __attribute__((packed)); /* size info, level 0x104 for set, 0x106 for query */ +} __attribute__((packed)); /* size info, level 0x104 for set, 0x106 for query */ struct file_alt_name_info { __u8 alt_name[1]; @@ -2238,7 +2259,8 @@ struct data_blob { 1) PosixCreateX - to set and return the mode, inode#, device info and perhaps add a CreateDevice - to create Pipes and other special .inodes Also note POSIX open flags - 2) Close - to return the last write time to do cache across close more safely + 2) Close - to return the last write time to do cache across close + more safely 3) FindFirst return unique inode number - what about resume key, two forms short (matches readdir) and full (enough info to cache inodes) 4) Mkdir - set mode @@ -2273,7 +2295,8 @@ struct data_blob { TRANSACTION2 (18 cases) SMB_SET_FILE_END_OF_FILE_INFO2 SMB_SET_PATH_END_OF_FILE_INFO2 (BB verify that never need to set allocation size) - SMB_SET_FILE_BASIC_INFO2 (setting times - BB can it be done via Unix ext?) + SMB_SET_FILE_BASIC_INFO2 (setting times - BB can it be done via + Unix ext?) COPY (note support for copy across directories) - FUTURE, OPTIONAL setting/getting OS/2 EAs - FUTURE (BB can this handle @@ -2293,13 +2316,13 @@ struct data_blob { T2 QUERY_PATH_INFO (SMB_QUERY_FILE_UNIX_BASIC) - BB check for missing inode fields Actually need QUERY_FILE_UNIX_INFO since has inode num BB what about a) blksize/blkbits/blocks - b) i_version - c) i_rdev - d) notify mask? - e) generation - f) size_seqcount + b) i_version + c) i_rdev + d) notify mask? + e) generation + f) size_seqcount T2 FIND_FIRST/FIND_NEXT FIND_FILE_UNIX - TRANS2_GET_DFS_REFERRAL - OPTIONAL but recommended + TRANS2_GET_DFS_REFERRAL - OPTIONAL but recommended T2_QFS_INFO QueryDevice/AttributeInfo - OPTIONAL @@ -2338,7 +2361,7 @@ typedef struct file_xattr_info { __u32 xattr_value_len; char xattr_name[0]; /* followed by xattr_value[xattr_value_len], no pad */ -} __attribute__((packed)) FILE_XATTR_INFO; /* extended attribute, info level 0x205 */ +} __attribute__((packed)) FILE_XATTR_INFO; /* extended attribute, info level 0x205 */ /* flags for chattr command */ -- cgit v1.2.2 From b359049f270dcaab8a5bbdbb966594c16caba16c Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 7 Feb 2007 22:19:12 -0600 Subject: [POWERPC] 83xx: Add base support for the MPC8313E RDB Add support for the MPC8313E Reference Development Board (RDB). The board is a mini-ITX reference board with 128M DDR2, 8M flash, 32M NAND, USB, PCI, gigabit ethernet, and serial. Signed-off-by: Wilson Lo Signed-off-by: Scott Wood Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8313erdb.dts | 219 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/Kconfig | 12 ++ arch/powerpc/platforms/83xx/Makefile | 1 + arch/powerpc/platforms/83xx/mpc8313_rdb.c | 99 ++++++++++++++ 4 files changed, 331 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8313erdb.dts create mode 100644 arch/powerpc/platforms/83xx/mpc8313_rdb.c diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts new file mode 100644 index 000000000000..3d2f5a06df3f --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -0,0 +1,219 @@ +/* + * MPC8313E RDB Device Tree Source + * + * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8313ERDB"; + compatible = "MPC83xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8313@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 08000000>; // 128MB at 0 + }; + + soc8313@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <13 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@4 { + linux,phandle = <2452004>; + interrupt-parent = <700>; + interrupts = <14 2>; + reg = <4>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <25 8 24 8 23 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + ethernet@25000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <22 8 21 8 20 8>; + interrupt-parent = <700>; + phy-handle = <2452004>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x0E -mini PCI */ + 7000 0 0 1 700 12 8 + 7000 0 0 2 700 12 8 + 7000 0 0 3 700 12 8 + 7000 0 0 4 700 12 8 + + /* IDSEL 0x0F - PCI slot */ + 7800 0 0 1 700 11 8 + 7800 0 0 2 700 12 8 + 7800 0 0 3 700 11 8 + 7800 0 0 4 700 12 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 7000>; + interrupts = ; + interrupt-parent = <700>; + /* Rev. 2.2 */ + num-channels = <1>; + channel-fifo-len = <18>; + exec-units-mask = <0000004c>; + descriptor-types-mask = <0122003f>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index edcd5b875b66..46883c5136ac 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -5,6 +5,12 @@ choice prompt "Machine Type" default MPC834x_SYS +config MPC8313_RDB + bool "Freescale MPC8313 RDB" + select DEFAULT_UIMAGE + help + This option enables support for the MPC8313 RDB board. + config MPC832x_MDS bool "Freescale MPC832x MDS" select DEFAULT_UIMAGE @@ -41,6 +47,12 @@ config MPC8360E_PB endchoice +config PPC_MPC831x + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8313_RDB + config PPC_MPC832x bool select PPC_UDBG_16550 diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index f1aa7e24a938..0b732a79c0a8 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -3,6 +3,7 @@ # obj-y := misc.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c new file mode 100644 index 000000000000..c3b98c34eb6b --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -0,0 +1,99 @@ +/* + * arch/powerpc/platforms/83xx/mpc8313_rdb.c + * + * Description: MPC8313x RDB board specific routines. + * This file is based on mpc834x_sys.c + * Author: Lo Wlison + * + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include + +#include +#include +#include + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8313_rdb_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc8313_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif +} + +void __init mpc8313_rdb_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc8313_rdb_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8313ERDB")) + return 0; + + DBG("MPC8313 RDB found\n"); + + return 1; +} + +define_machine(mpc8313_rdb) { + .name = "MPC8313 RDB", + .probe = mpc8313_rdb_probe, + .setup_arch = mpc8313_rdb_setup_arch, + .init_IRQ = mpc8313_rdb_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.2.2 From fd9aeb85273e9eb4d1a0b83487576a2e22da67fc Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 7 Feb 2007 22:19:45 -0600 Subject: [POWERPC] 83xx: add the mpc8313erdb defconfig Add the mpc8313erdb defconfig Signed-off-by: Wilson Lo Signed-off-by: Scott Wood Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc8313_rdb_defconfig | 1409 ++++++++++++++++++++++++++++ 1 file changed, 1409 insertions(+) create mode 100644 arch/powerpc/configs/mpc8313_rdb_defconfig diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/mpc8313_rdb_defconfig new file mode 100644 index 000000000000..f87523716c44 --- /dev/null +++ b/arch/powerpc/configs/mpc8313_rdb_defconfig @@ -0,0 +1,1409 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Wed Feb 7 22:08:04 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +CONFIG_MPC8313_RDB=y +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC834x_SYS is not set +# CONFIG_MPC834x_ITX is not set +# CONFIG_MPC8360E_PB is not set +CONFIG_PPC_MPC831x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xfe000000 +CONFIG_MTD_PHYSMAP_LEN=0x1000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MPC83xx=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_NET2280=y +CONFIG_USB_NET2280=y +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=y + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v1.2.2 From ea5b7a61b606854bd17272cb0a751b6d0a8bfa6b Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:51:09 +0800 Subject: [POWERPC] 83xx: Added new dr_mode property for usb controller on 83xx Added a new dr_mode property to describe what mode the DR controller is being used in (host, device, OTG). Updated the MPC8349E MDS dts with this new property. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- Documentation/powerpc/booting-without-of.txt | 4 ++++ arch/powerpc/boot/dts/mpc8349emds.dts | 6 ++++++ 2 files changed, 10 insertions(+) diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 33994271cb3b..3b514672b80e 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1334,6 +1334,9 @@ platforms are moved over to use the flattened-device-tree model. fsl-usb2-mph compatible controllers. Either this property or "port0" (or both) must be defined for "fsl-usb2-mph" compatible controllers. + - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible + controllers. Can be "host", "peripheral", or "otg". Default to + "host" if not defined for backward compatibility. Recommended properties : - interrupts : where a is the interrupt number and b is a @@ -1367,6 +1370,7 @@ platforms are moved over to use the flattened-device-tree model. #size-cells = <0>; interrupt-parent = <700>; interrupts = <26 1>; + dr_mode = "otg"; phy = "ulpi"; }; diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts index efceb3432653..dc121b3cb4a9 100644 --- a/arch/powerpc/boot/dts/mpc8349emds.dts +++ b/arch/powerpc/boot/dts/mpc8349emds.dts @@ -39,6 +39,11 @@ reg = <00000000 10000000>; // 256MB at 0 }; + bcsr@e2400000 { + device_type = "board-control"; + reg = ; + }; + soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -103,6 +108,7 @@ #size-cells = <0>; interrupt-parent = <700>; interrupts = <26 2>; + dr_mode = "otg"; phy_type = "ulpi"; }; -- cgit v1.2.2 From c161698287f501e7ea229672383af7aefe8a2056 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:47:56 +0800 Subject: [POWERPC] 83xx: Add USB setup code for MPC8349E MDS-PB Add board specific initialization code for USB to work in both MPH and DR mode for MPC8349E MDS-PB board. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc834x_sys.c | 73 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/mpc83xx.h | 18 ++++++++ 2 files changed, 91 insertions(+) diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index f30393f0b832..873ec543c361 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -43,6 +43,76 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif +#define BCSR5_INT_USB 0x02 +/* Note: This is only for PB, not for PB+PIB + * On PB only port0 is connected using ULPI */ +static int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl; + void __iomem *immap; + void __iomem *bcsr_regs = NULL; + u8 bcsr5; + struct device_node *np = NULL; + int port0_is_dr = 0; + + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) + port0_is_dr = 1; + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ + if (port0_is_dr) { + printk(KERN_WARNING + "There is only one USB port on PB board! \n"); + return -1; + } else if (!port0_is_dr) + /* No usb port enabled */ + return -1; + } + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -1; + + /* Configure clock */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS); + if (port0_is_dr) + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + else + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + + /* Configure Pin */ + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); + /* set port0 only */ + if (port0_is_dr) + sicrl |= MPC83XX_SICRL_USB0; + else + sicrl &= ~(MPC83XX_SICRL_USB0); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + + iounmap(immap); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start + 1); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + /* + * if SYS board is plug into PIB board, + * force to use the PHY on SYS board + */ + bcsr5 = in_8(bcsr_regs + 5); + if (!(bcsr5 & BCSR5_INT_USB)) + out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); + iounmap(bcsr_regs); + return 0; +} + /* ************************************************************************ * * Setup the architecture @@ -65,6 +135,7 @@ static void __init mpc834x_sys_setup_arch(void) loops_per_jiffy = 50000000 / HZ; of_node_put(np); } + #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); @@ -72,6 +143,8 @@ static void __init mpc834x_sys_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif + mpc834x_usb_cfg(); + #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 01cae106912b..9cd03b59c8f4 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -4,6 +4,24 @@ #include #include +/* System Clock Control Register */ +#define MPC83XX_SCCR_OFFS 0xA08 +#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000 +#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000 +#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000 +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000 +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000 +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000 + +/* system i/o configuration register low */ +#define MPC83XX_SICRL_OFFS 0x114 +#define MPC83XX_SICRL_USB0 0x40000000 +#define MPC83XX_SICRL_USB1 0x20000000 + +/* system i/o configuration register high */ +#define MPC83XX_SICRH_OFFS 0x118 +#define MPC83XX_SICRH_USB_UTMI 0x00020000 + /* * Declaration for the various functions exported by the * mpc83xx_* files. Mostly for use by mpc83xx_setup -- cgit v1.2.2 From 97c5a20ae68774b4c9246c4657be0d88317f103f Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:49:24 +0800 Subject: [POWERPC] 83xx: Add platform_device for USB DR peripheral driver Add platform_device setup code for OTG/peripheral mode of 834x DR module. It is needed for USB client driver to work. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_soc.c | 78 ++++++++++++++++++++++++++++++++----------- 1 file changed, 59 insertions(+), 19 deletions(-) diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 9f2a9a444bfb..34161bc5a02f 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -441,7 +441,8 @@ static int __init fsl_usb_of_init(void) { struct device_node *np; unsigned int i; - struct platform_device *usb_dev_mph = NULL, *usb_dev_dr = NULL; + struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL, + *usb_dev_dr_client = NULL; int ret; for (np = NULL, i = 0; @@ -507,33 +508,72 @@ static int __init fsl_usb_of_init(void) of_irq_to_resource(np, 0, &r[1]); - usb_dev_dr = - platform_device_register_simple("fsl-ehci", i, r, 2); - if (IS_ERR(usb_dev_dr)) { - ret = PTR_ERR(usb_dev_dr); + prop = get_property(np, "dr_mode", NULL); + + if (!prop || !strcmp(prop, "host")) { + usb_data.operating_mode = FSL_USB2_DR_HOST; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + } else if (prop && !strcmp(prop, "peripheral")) { + usb_data.operating_mode = FSL_USB2_DR_DEVICE; + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else if (prop && !strcmp(prop, "otg")) { + usb_data.operating_mode = FSL_USB2_DR_OTG; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else { + ret = -EINVAL; goto err; } - usb_dev_dr->dev.coherent_dma_mask = 0xffffffffUL; - usb_dev_dr->dev.dma_mask = &usb_dev_dr->dev.coherent_dma_mask; - - usb_data.operating_mode = FSL_USB2_DR_HOST; - prop = get_property(np, "phy_type", NULL); usb_data.phy_mode = determine_usb_phy(prop); - ret = - platform_device_add_data(usb_dev_dr, &usb_data, - sizeof(struct - fsl_usb2_platform_data)); - if (ret) - goto unreg_dr; + if (usb_dev_dr_host) { + usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_host, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } + if (usb_dev_dr_client) { + usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_client, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } } return 0; unreg_dr: - if (usb_dev_dr) - platform_device_unregister(usb_dev_dr); + if (usb_dev_dr_host) + platform_device_unregister(usb_dev_dr_host); + if (usb_dev_dr_client) + platform_device_unregister(usb_dev_dr_client); unreg_mph: if (usb_dev_mph) platform_device_unregister(usb_dev_mph); @@ -699,7 +739,7 @@ static int __init fs_enet_of_init(void) if (ret) goto unreg; } - + of_node_put(phy); of_node_put(mdio); -- cgit v1.2.2 From 595dcfecf642c8b0772989ed46f15ee03c25a205 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 8 Feb 2007 18:11:42 +0000 Subject: [CIFS] POSIX CIFS Extensions (continued) - POSIX Open Signed-off-by: Steve French --- fs/cifs/CHANGES | 2 ++ fs/cifs/cifspdu.h | 15 +++++++++++++++ 2 files changed, 17 insertions(+) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 85e3850bf2c9..a1fb03f19637 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -1,6 +1,8 @@ Version 1.47 ------------ Fix oops in list_del during mount caused by unaligned string. +Fix file corruption which could occur on some large file +copies caused by writepages page i/o completion bug. Seek to SEEK_END forces check for update of file size for non-cached files. diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 2920ea0527f5..529a000bee46 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -796,6 +796,8 @@ typedef struct smb_com_openx_rsp { __u16 ByteCount; } __attribute__((packed)) OPENX_RSP; +/* For encoding of POSIX Open Request - see trans2 function 0x209 data struct */ + /* Legacy write request for older servers */ typedef struct smb_com_writex_req { struct smb_hdr hdr; /* wct = 12 */ @@ -2096,6 +2098,19 @@ struct cifs_posix_acl { /* access conrol list (ACL) */ /* end of POSIX ACL definitions */ +typedef struct { + __u32 OpenFlags; /* same as NT CreateX */ + __u32 PosixOpenFlags; + __u32 Mode; + __u16 Level; /* reply level requested (see QPathInfo levels) */ + __u16 Pad; /* reserved - MBZ */ +} __attribute__((packed)) OPEN_PSX_REQ; /* level 0x209 SetPathInfo data */ + +typedef struct { + /* reply varies based on requested level */ +} __atribute__((packed)) OPEN_PSX_RSP; /* level 0x209 SetPathInfo data */ + + struct file_internal_info { __u64 UniqueId; /* inode number */ } __attribute__((packed)); /* level 0x3ee */ -- cgit v1.2.2 From 7ba526316ae122e60c0c7a40793491f71b9ec590 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 8 Feb 2007 18:14:13 +0000 Subject: [CIFS] Allow update of EOF on remote extend of file Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 2 +- fs/cifs/file.c | 5 ++++- fs/cifs/inode.c | 6 +++--- fs/cifs/readdir.c | 6 +++--- 4 files changed, 11 insertions(+), 8 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index f1f8225102f0..1108f17bf550 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -57,7 +57,7 @@ extern int SendReceiveBlockingLock(const unsigned int /* xid */ , int * /* bytes returned */); extern int checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length); extern int is_valid_oplock_break(struct smb_hdr *smb, struct TCP_Server_Info *); -extern int is_size_safe_to_change(struct cifsInodeInfo *); +extern int is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof); extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *); extern unsigned int smbCalcSize(struct smb_hdr *ptr); extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr); diff --git a/fs/cifs/file.c b/fs/cifs/file.c index e9dcf5ee29a2..07ff9351e9ee 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1954,7 +1954,7 @@ static int cifs_readpage(struct file *file, struct page *page) refreshing the inode only on increases in the file size but this is tricky to do without racing with writebehind page caching in the current Linux kernel design */ -int is_size_safe_to_change(struct cifsInodeInfo *cifsInode) +int is_size_safe_to_change(struct cifsInodeInfo *cifsInode, __u64 end_of_file) { struct cifsFileInfo *open_file = NULL; @@ -1976,6 +1976,9 @@ int is_size_safe_to_change(struct cifsInodeInfo *cifsInode) return 1; } + if(i_size_read(&cifsInode->vfs_inode) < end_of_file) + return 1; + return 0; } else return 1; diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index c4fa91b8b62f..3f5bc83dc3d1 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -140,7 +140,7 @@ int cifs_get_inode_info_unix(struct inode **pinode, inode->i_gid = le64_to_cpu(findData.Gid); inode->i_nlink = le64_to_cpu(findData.Nlinks); - if (is_size_safe_to_change(cifsInfo)) { + if (is_size_safe_to_change(cifsInfo, end_of_file)) { /* can not safely change the file size here if the client is writing to it due to potential races */ @@ -491,8 +491,8 @@ int cifs_get_inode_info(struct inode **pinode, /* BB add code here - validate if device or weird share or device type? */ } - if (is_size_safe_to_change(cifsInfo)) { - /* can not safely change the file size here if the + if (is_size_safe_to_change(cifsInfo, le64_to_cpu(pfindData->EndOfFile))) { + /* can not safely shrink the file size here if the client is writing to it due to potential races */ i_size_write(inode,le64_to_cpu(pfindData->EndOfFile)); diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 782940be550f..c6220bd27165 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -222,7 +222,7 @@ static void fill_in_inode(struct inode *tmp_inode, int new_buf_type, atomic_set(&cifsInfo->inUse, 1); } - if (is_size_safe_to_change(cifsInfo)) { + if (is_size_safe_to_change(cifsInfo, end_of_file)) { /* can not safely change the file size here if the client is writing to it due to potential races */ i_size_write(tmp_inode, end_of_file); @@ -351,10 +351,10 @@ static void unix_fill_in_inode(struct inode *tmp_inode, tmp_inode->i_gid = le64_to_cpu(pfindData->Gid); tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks); - if (is_size_safe_to_change(cifsInfo)) { + if (is_size_safe_to_change(cifsInfo, end_of_file)) { /* can not safely change the file size here if the client is writing to it due to potential races */ - i_size_write(tmp_inode,end_of_file); + i_size_write(tmp_inode, end_of_file); /* 512 bytes (2**9) is the fake blocksize that must be used */ /* for this calculation, not the real blocksize */ -- cgit v1.2.2 From 8f34f6cfa27ddae8faf10aef986db2fda1ba6791 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 8 Feb 2007 10:47:31 -0600 Subject: [POWERPC] QE: Rename ucc_slow_info.us_regs to ucc_slow_info.regs Rename the 'us_regs' field of the ucc_slow_info structure in ucc_slow.h to just 'regs'. The equivalent field in the ucc_fast_info structure is also called 'regs', so this patch makes them comparable, and makes the code a little easier to read, because there already is a 'us_regs' in another ucc_slow structure. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/qe_lib/ucc_slow.c | 6 +++--- include/asm-powerpc/ucc_slow.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 47b56203f47e..0e97e5c94f8a 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -179,7 +179,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_info = us_info; uccs->saved_uccm = 0; uccs->p_rx_frame = 0; - uccs->us_regs = us_info->us_regs; + uccs->us_regs = us_info->regs; us_regs = uccs->us_regs; uccs->p_ucce = (u16 *) & (us_regs->ucce); uccs->p_uccm = (u16 *) & (us_regs->uccm); @@ -206,7 +206,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); /* Init Guemr register */ - if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) { + if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) { uccs_err("ucc_slow_init: Could not init the guemr register."); ucc_slow_free(uccs); return ret; @@ -214,7 +214,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set UCC to slow type */ if ((ret = ucc_set_type(us_info->ucc_num, - (struct ucc_common *) (us_info->us_regs), + (struct ucc_common *) (us_info->regs), UCC_SPEED_TYPE_SLOW))) { uccs_err("ucc_slow_init: Could not init the guemr register."); ucc_slow_free(uccs); diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h index ca93bc99237e..1babad99c719 100644 --- a/include/asm-powerpc/ucc_slow.h +++ b/include/asm-powerpc/ucc_slow.h @@ -150,7 +150,7 @@ struct ucc_slow_info { int ucc_num; enum qe_clock rx_clock; enum qe_clock tx_clock; - struct ucc_slow *us_regs; + struct ucc_slow *regs; int irq; u16 uccm_mask; int data_mem_part; -- cgit v1.2.2 From 8dabba5d1a8f1893bc3db9bf66007de2020c8b62 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 9 Feb 2007 09:30:05 -0600 Subject: [POWERPC] Fix is_power_of_4(x) compile error When building an 85xx kernel we get: CC arch/powerpc/mm/pgtable_32.o arch/powerpc/mm/pgtable_32.c: In function 'io_block_mapping': arch/powerpc/mm/pgtable_32.c:330: error: expected identifier before '(' token arch/powerpc/mm/pgtable_32.c:330: error: expected statement before ')' token The is_power_of_2(x) fixup patch left an extra ')' on the is_power_of_4 macro. There is a similiar issue on the arch/ppc side. Signed-off-by: Kumar Gala --- arch/powerpc/mm/pgtable_32.c | 2 +- arch/ppc/mm/pgtable.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index bd02272bcb0f..c284bdac9947 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -295,7 +295,7 @@ void __init mapin_ram(void) } /* is x a power of 4? */ -#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1) /* * Set up a mapping for a block of I/O. diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 82b06a1ef95d..c023b7298809 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -314,7 +314,7 @@ void __init mapin_ram(void) } /* is x a power of 4? */ -#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1) /* * Set up a mapping for a block of I/O. -- cgit v1.2.2 From 27630bec9478a2dd387c68b5e435ed3fdd3a513e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 9 Feb 2007 09:30:45 -0600 Subject: [POWERPC] 85xx: Marked functions static Marked a number of functions in 85xx board code as static. Also, some minor whitespace cleanup Signed-off-by: Kumar Gala --- arch/powerpc/platforms/85xx/mpc85xx_ads.c | 7 +++---- arch/powerpc/platforms/85xx/mpc85xx_cds.c | 17 +++++------------ 2 files changed, 8 insertions(+), 16 deletions(-) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index bda2e55e6c4c..c56fce57621c 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -45,8 +45,7 @@ unsigned long isa_mem_base = 0; #endif #ifdef CONFIG_PCI -int -mpc85xx_exclude_device(u_char bus, u_char devfn) +static int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; @@ -69,7 +68,7 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) #endif /* CONFIG_CPM2 */ -void __init mpc85xx_ads_pic_init(void) +static void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic; struct resource r; @@ -254,7 +253,7 @@ static void __init mpc85xx_ads_setup_arch(void) #endif } -void mpc85xx_ads_show_cpuinfo(struct seq_file *m) +static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 953cd5dd3f54..abc0aca6de40 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -56,7 +56,6 @@ unsigned long isa_mem_base = 0; static int cds_pci_slot = 2; static volatile u8 *cadmus; - #ifdef CONFIG_PCI #define ARCADIA_HOST_BRIDGE_IDSEL 17 @@ -64,8 +63,7 @@ static volatile u8 *cadmus; extern int mpc85xx_pci2_busno; -int -mpc85xx_exclude_device(u_char bus, u_char devfn) +static int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; @@ -81,8 +79,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } -void __init -mpc85xx_cds_pcibios_fixup(void) +static void __init mpc85xx_cds_pcibios_fixup(void) { struct pci_dev *dev; u_char c; @@ -144,7 +141,7 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc) #endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ -void __init mpc85xx_cds_pic_init(void) +static void __init mpc85xx_cds_pic_init(void) { struct mpic *mpic; struct resource r; @@ -224,12 +221,10 @@ void __init mpc85xx_cds_pic_init(void) #endif /* CONFIG_PPC_I8259 */ } - /* * Setup the architecture */ -static void __init -mpc85xx_cds_setup_arch(void) +static void __init mpc85xx_cds_setup_arch(void) { struct device_node *cpu; #ifdef CONFIG_PCI @@ -276,9 +271,7 @@ mpc85xx_cds_setup_arch(void) #endif } - -void -mpc85xx_cds_show_cpuinfo(struct seq_file *m) +static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; -- cgit v1.2.2 From 862a7284980d809a583e9a34c774fab84e0a46f8 Mon Sep 17 00:00:00 2001 From: Rojhalat Ibrahim Date: Fri, 9 Feb 2007 15:10:38 +0100 Subject: [PPC] Fix compile error for e500 core based processors We get the following compiler error: CC arch/ppc/kernel/ppc_ksyms.o arch/ppc/kernel/ppc_ksyms.c:275: error: '__mtdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:275: warning: type defaults to 'int' in declaration of '__mtdcr' arch/ppc/kernel/ppc_ksyms.c:276: error: '__mfdcr' undeclared here (not in a function) arch/ppc/kernel/ppc_ksyms.c:276: warning: type defaults to 'int' in declaration of '__mfdcr' make[1]: *** [arch/ppc/kernel/ppc_ksyms.o] Error 1 This is due to the EXPORT_SYMBOL for __mtdcr/__mfdcr not having the proper CONFIG protection Signed-off-by: Rojhalat Ibrahim Signed-off-by: Kumar Gala --- arch/ppc/kernel/ppc_ksyms.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 1f49503317cb..1318b6f4c3df 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -271,7 +271,7 @@ EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */ extern long *intercept_table; EXPORT_SYMBOL(intercept_table); #endif /* CONFIG_PPC_STD_MMU */ -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_DCR_NATIVE EXPORT_SYMBOL(__mtdcr); EXPORT_SYMBOL(__mfdcr); #endif -- cgit v1.2.2 From 49baa91d6863df480fa05eb57524a274f77fa886 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 8 Feb 2007 01:11:00 -0600 Subject: [POWERPC] 83xx: Updated and renamed MPC834x SYS to MPC834x MDS The MPC834x SYS board has always been called the MPC834x MDS since its public release. Removed all references to SYS and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc834x_mds*). Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emds.dts | 334 ----------------------------- arch/powerpc/boot/dts/mpc834x_mds.dts | 334 +++++++++++++++++++++++++++++ arch/powerpc/configs/mpc834x_mds_defconfig | 9 +- arch/powerpc/platforms/83xx/Kconfig | 12 +- arch/powerpc/platforms/83xx/Makefile | 2 +- arch/powerpc/platforms/83xx/mpc834x_itx.c | 2 - arch/powerpc/platforms/83xx/mpc834x_mds.c | 213 ++++++++++++++++++ arch/powerpc/platforms/83xx/mpc834x_sys.c | 213 ------------------ arch/powerpc/platforms/83xx/mpc834x_sys.h | 23 -- 9 files changed, 559 insertions(+), 583 deletions(-) delete mode 100644 arch/powerpc/boot/dts/mpc8349emds.dts create mode 100644 arch/powerpc/boot/dts/mpc834x_mds.dts create mode 100644 arch/powerpc/platforms/83xx/mpc834x_mds.c delete mode 100644 arch/powerpc/platforms/83xx/mpc834x_sys.c delete mode 100644 arch/powerpc/platforms/83xx/mpc834x_sys.h diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts deleted file mode 100644 index dc121b3cb4a9..000000000000 --- a/arch/powerpc/boot/dts/mpc8349emds.dts +++ /dev/null @@ -1,334 +0,0 @@ -/* - * MPC8349E MDS Device Tree Source - * - * Copyright 2005, 2006 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/ { - model = "MPC8349EMDS"; - compatible = "MPC834xMDS"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #cpus = <1>; - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8349@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - 32-bit; - }; - }; - - memory { - device_type = "memory"; - reg = <00000000 10000000>; // 256MB at 0 - }; - - bcsr@e2400000 { - device_type = "board-control"; - reg = ; - }; - - soc8349@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = ; - bus-frequency = <0>; - - wdt@200 { - device_type = "watchdog"; - compatible = "mpc83xx_wdt"; - reg = <200 100>; - }; - - i2c@3000 { - device_type = "i2c"; - compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = ; - interrupt-parent = <700>; - dfsrr; - }; - - i2c@3100 { - device_type = "i2c"; - compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = ; - interrupt-parent = <700>; - dfsrr; - }; - - spi@7000 { - device_type = "spi"; - compatible = "mpc83xx_spi"; - reg = <7000 1000>; - interrupts = <10 8>; - interrupt-parent = <700>; - mode = <0>; - }; - - /* phy type (ULPI or SERIAL) are only types supportted for MPH */ - /* port = 0 or 1 */ - usb@22000 { - device_type = "usb"; - compatible = "fsl-usb2-mph"; - reg = <22000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <27 2>; - phy_type = "ulpi"; - port1; - }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ - usb@23000 { - device_type = "usb"; - compatible = "fsl-usb2-dr"; - reg = <23000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 2>; - dr_mode = "otg"; - phy_type = "ulpi"; - }; - - mdio@24520 { - device_type = "mdio"; - compatible = "gianfar"; - reg = <24520 20>; - #address-cells = <1>; - #size-cells = <0>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <700>; - interrupts = <11 2>; - reg = <0>; - device_type = "ethernet-phy"; - }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <700>; - interrupts = <12 2>; - reg = <1>; - device_type = "ethernet-phy"; - }; - }; - - ethernet@24000 { - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <24000 1000>; - address = [ 00 00 00 00 00 00 ]; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8 21 8 22 8>; - interrupt-parent = <700>; - phy-handle = <2452000>; - }; - - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <25000 1000>; - address = [ 00 00 00 00 00 00 ]; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 8 24 8 25 8>; - interrupt-parent = <700>; - phy-handle = <2452001>; - }; - - serial@4500 { - device_type = "serial"; - compatible = "ns16550"; - reg = <4500 100>; - clock-frequency = <0>; - interrupts = <9 8>; - interrupt-parent = <700>; - }; - - serial@4600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <4600 100>; - clock-frequency = <0>; - interrupts = ; - interrupt-parent = <700>; - }; - - pci@8500 { - interrupt-map-mask = ; - interrupt-map = < - - /* IDSEL 0x11 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 - - /* IDSEL 0x12 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 - - /* IDSEL 0x13 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 - - /* IDSEL 0x15 */ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 - - /* IDSEL 0x16 */ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 - - /* IDSEL 0x17 */ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 - - /* IDSEL 0x18 */ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "83xx"; - device_type = "pci"; - }; - - pci@8600 { - interrupt-map-mask = ; - interrupt-map = < - - /* IDSEL 0x11 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 - - /* IDSEL 0x12 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 - - /* IDSEL 0x13 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 - - /* IDSEL 0x15 */ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 - - /* IDSEL 0x16 */ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 - - /* IDSEL 0x17 */ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 - - /* IDSEL 0x18 */ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 b0000000 b0000000 0 10000000 - 42000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2100000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8600 100>; - compatible = "83xx"; - device_type = "pci"; - }; - - /* May need to remove if on a part without crypto engine */ - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 10000>; - interrupts = ; - interrupt-parent = <700>; - num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; - /* desc mask is for rev2.0, - * we need runtime fixup for >2.0 */ - descriptor-types-mask = <01010ebf>; - }; - - /* IPIC - * interrupts cell = - * sense values match linux IORESOURCE_IRQ_* defines: - * sense == 8: Level, low assertion - * sense == 2: Edge, high-to-low change - */ - pic@700 { - linux,phandle = <700>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <700 100>; - built-in; - device_type = "ipic"; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts new file mode 100644 index 000000000000..dc121b3cb4a9 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -0,0 +1,334 @@ +/* + * MPC8349E MDS Device Tree Source + * + * Copyright 2005, 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8349EMDS"; + compatible = "MPC834xMDS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; // 256MB at 0 + }; + + bcsr@e2400000 { + device_type = "board-control"; + reg = ; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI or SERIAL) are only types supportted for MPH */ + /* port = 0 or 1 */ + usb@22000 { + device_type = "usb"; + compatible = "fsl-usb2-mph"; + reg = <22000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <27 2>; + phy_type = "ulpi"; + port1; + }; + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <700>; + interrupts = <11 2>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8 21 8 22 8>; + interrupt-parent = <700>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 8 24 8 25 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 */ + c000 0 0 1 700 15 8 + c000 0 0 2 700 16 8 + c000 0 0 3 700 17 8 + c000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + pci@8600 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 */ + c000 0 0 1 700 15 8 + c000 0 0 2 700 16 8 + c000 0 0 3 700 17 8 + c000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 b0000000 b0000000 0 10000000 + 42000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 e2100000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8600 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + /* May need to remove if on a part without crypto engine */ + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = ; + interrupt-parent = <700>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; + /* desc mask is for rev2.0, + * we need runtime fixup for >2.0 */ + descriptor-types-mask = <01010ebf>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig index 9eaed3a36983..2e3f8efb6ab1 100644 --- a/arch/powerpc/configs/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:27 2007 +# Linux kernel version: 2.6.20 +# Thu Feb 8 01:00:48 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_83xx=y @@ -128,8 +128,9 @@ CONFIG_PPC_GEN550=y # # Platform support # +# CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set -CONFIG_MPC834x_SYS=y +CONFIG_MPC834x_MDS=y # CONFIG_MPC834x_ITX is not set # CONFIG_MPC8360E_PB is not set CONFIG_MPC834x=y diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 46883c5136ac..1aea1e69ff31 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -3,7 +3,7 @@ menu "Platform support" choice prompt "Machine Type" - default MPC834x_SYS + default MPC834x_MDS config MPC8313_RDB bool "Freescale MPC8313 RDB" @@ -18,13 +18,13 @@ config MPC832x_MDS help This option enables support for the MPC832x MDS evaluation board. -config MPC834x_SYS - bool "Freescale MPC834x SYS" +config MPC834x_MDS + bool "Freescale MPC834x MDS" select DEFAULT_UIMAGE help - This option enables support for the MPC 834x SYS evaluation board. + This option enables support for the MPC 834x MDS evaluation board. - Be aware that PCI buses can only function when SYS board is plugged + Be aware that PCI buses can only function when MDS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's responsibility. @@ -63,7 +63,7 @@ config MPC834x bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC834x_SYS || MPC834x_ITX + default y if MPC834x_MDS || MPC834x_ITX config PPC_MPC836x bool diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 0b732a79c0a8..6c8199c4c382 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -4,7 +4,7 @@ obj-y := misc.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o -obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o +obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 2446dea9407e..443a3172f370 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -38,8 +38,6 @@ #include "mpc83xx.h" -#include - #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c new file mode 100644 index 000000000000..d2736da76c46 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -0,0 +1,213 @@ +/* + * arch/powerpc/platforms/83xx/mpc834x_mds.c + * + * MPC834x MDS board specific routines + * + * Maintainer: Kumar Gala + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc83xx.h" + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +#define BCSR5_INT_USB 0x02 +/* Note: This is only for PB, not for PB+PIB + * On PB only port0 is connected using ULPI */ +static int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl; + void __iomem *immap; + void __iomem *bcsr_regs = NULL; + u8 bcsr5; + struct device_node *np = NULL; + int port0_is_dr = 0; + + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) + port0_is_dr = 1; + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ + if (port0_is_dr) { + printk(KERN_WARNING + "There is only one USB port on PB board! \n"); + return -1; + } else if (!port0_is_dr) + /* No usb port enabled */ + return -1; + } + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -1; + + /* Configure clock */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS); + if (port0_is_dr) + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + else + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + + /* Configure Pin */ + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); + /* set port0 only */ + if (port0_is_dr) + sicrl |= MPC83XX_SICRL_USB0; + else + sicrl &= ~(MPC83XX_SICRL_USB0); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + + iounmap(immap); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start + 1); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + /* + * if MDS board is plug into PIB board, + * force to use the PHY on MDS board + */ + bcsr5 = in_8(bcsr_regs + 5); + if (!(bcsr5 & BCSR5_INT_USB)) + out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); + iounmap(bcsr_regs); + return 0; +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc834x_mds_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc834x_mds_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != 0) { + const unsigned int *fp = + get_property(np, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif + + mpc834x_usb_cfg(); + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +static void __init mpc834x_mds_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) +extern ulong ds1374_get_rtc_time(void); +extern int ds1374_set_rtc_time(ulong); + +static int __init mpc834x_rtc_hookup(void) +{ + struct timespec tv; + + ppc_md.get_rtc_time = ds1374_get_rtc_time; + ppc_md.set_rtc_time = ds1374_set_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time) (); + do_settimeofday(&tv); + + return 0; +} + +late_initcall(mpc834x_rtc_hookup); +#endif + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc834x_mds_probe(void) +{ + /* We always match for now, eventually we should look at the flat + dev tree to ensure this is the board we are suppose to run on + */ + return 1; +} + +define_machine(mpc834x_mds) { + .name = "MPC834x MDS", + .probe = mpc834x_mds_probe, + .setup_arch = mpc834x_mds_setup_arch, + .init_IRQ = mpc834x_mds_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c deleted file mode 100644 index 873ec543c361..000000000000 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/mpc834x_sys.c - * - * MPC834x SYS board specific routines - * - * Maintainer: Kumar Gala - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "mpc83xx.h" - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - -#define BCSR5_INT_USB 0x02 -/* Note: This is only for PB, not for PB+PIB - * On PB only port0 is connected using ULPI */ -static int mpc834x_usb_cfg(void) -{ - unsigned long sccr, sicrl; - void __iomem *immap; - void __iomem *bcsr_regs = NULL; - u8 bcsr5; - struct device_node *np = NULL; - int port0_is_dr = 0; - - if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) - port0_is_dr = 1; - if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ - if (port0_is_dr) { - printk(KERN_WARNING - "There is only one USB port on PB board! \n"); - return -1; - } else if (!port0_is_dr) - /* No usb port enabled */ - return -1; - } - - immap = ioremap(get_immrbase(), 0x1000); - if (!immap) - return -1; - - /* Configure clock */ - sccr = in_be32(immap + MPC83XX_SCCR_OFFS); - if (port0_is_dr) - sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ - else - sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ - out_be32(immap + MPC83XX_SCCR_OFFS, sccr); - - /* Configure Pin */ - sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); - /* set port0 only */ - if (port0_is_dr) - sicrl |= MPC83XX_SICRL_USB0; - else - sicrl &= ~(MPC83XX_SICRL_USB0); - out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); - - iounmap(immap); - - /* Map BCSR area */ - np = of_find_node_by_name(NULL, "bcsr"); - if (np != 0) { - struct resource res; - - of_address_to_resource(np, 0, &res); - bcsr_regs = ioremap(res.start, res.end - res.start + 1); - of_node_put(np); - } - if (!bcsr_regs) - return -1; - - /* - * if SYS board is plug into PIB board, - * force to use the PHY on SYS board - */ - bcsr5 = in_8(bcsr_regs + 5); - if (!(bcsr5 & BCSR5_INT_USB)) - out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); - iounmap(bcsr_regs); - return 0; -} - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init mpc834x_sys_setup_arch(void) -{ - struct device_node *np; - - if (ppc_md.progress) - ppc_md.progress("mpc834x_sys_setup_arch()", 0); - - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - const unsigned int *fp = - get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - -#ifdef CONFIG_PCI - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) - add_bridge(np); - - ppc_md.pci_exclude_device = mpc83xx_exclude_device; -#endif - - mpc834x_usb_cfg(); - -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -static void __init mpc834x_sys_init_IRQ(void) -{ - struct device_node *np; - - np = of_find_node_by_type(NULL, "ipic"); - if (!np) - return; - - ipic_init(np, 0); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} - -#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) -extern ulong ds1374_get_rtc_time(void); -extern int ds1374_set_rtc_time(ulong); - -static int __init mpc834x_rtc_hookup(void) -{ - struct timespec tv; - - ppc_md.get_rtc_time = ds1374_get_rtc_time; - ppc_md.set_rtc_time = ds1374_set_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time) (); - do_settimeofday(&tv); - - return 0; -} - -late_initcall(mpc834x_rtc_hookup); -#endif - -/* - * Called very early, MMU is off, device-tree isn't unflattened - */ -static int __init mpc834x_sys_probe(void) -{ - /* We always match for now, eventually we should look at the flat - dev tree to ensure this is the board we are suppose to run on - */ - return 1; -} - -define_machine(mpc834x_sys) { - .name = "MPC834x SYS", - .probe = mpc834x_sys_probe, - .setup_arch = mpc834x_sys_setup_arch, - .init_IRQ = mpc834x_sys_init_IRQ, - .get_irq = ipic_get_irq, - .restart = mpc83xx_restart, - .time_init = mpc83xx_time_init, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h deleted file mode 100644 index 7d5bbef084e7..000000000000 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/mpc834x_sys.h - * - * MPC834X SYS common board definitions - * - * Maintainer: Kumar Gala - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC83XX_SYS_H__ -#define __MACH_MPC83XX_SYS_H__ - -#define PIRQA MPC83xx_IRQ_EXT4 -#define PIRQB MPC83xx_IRQ_EXT5 -#define PIRQC MPC83xx_IRQ_EXT6 -#define PIRQD MPC83xx_IRQ_EXT7 - -#endif /* __MACH_MPC83XX_SYS_H__ */ -- cgit v1.2.2 From 8500adc79b15fa85b403dbf04aba3497c1f80e50 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 28 Jan 2007 23:31:08 +0100 Subject: [POWERPC] Update to linkstation / kurobox support Linkstation systems capable of running mainline kernels use u-boot as a bootloader, so, specifying a suitable kernel command is not a problem. Don't guess. Also extend linkstation_defconfig to support the linkstation HS model with a IT8212 IDE controller and kuroboxHD/HD-HLAN linkstation models with a tulip ethernet chip. The latter also require a slightly different .dts file, which is also included with this patch. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/kuroboxHD.dts | 148 +++++++++++++++++++++++ arch/powerpc/configs/linkstation_defconfig | 118 ++++++++++++------ arch/powerpc/platforms/embedded6xx/linkstation.c | 12 -- 3 files changed, 226 insertions(+), 52 deletions(-) create mode 100644 arch/powerpc/boot/dts/kuroboxHD.dts diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts new file mode 100644 index 000000000000..096e94ac415f --- /dev/null +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -0,0 +1,148 @@ +/* + * Device Tree Souce for Buffalo KuroboxHD + * + * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use + * the default configuration linkstation_defconfig. + * + * Based on sandpoint.dts + * + * 2006 (c) G. Liakhovetski + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + +XXXX add flash parts, rtc, ?? + +build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" + + + */ + +/ { + linux,phandle = <1000>; + model = "KuroboxHD"; + compatible = "linkstation"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + linux,phandle = <2000>; + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,603e { /* Really 8241 */ + linux,phandle = <2100>; + linux,boot-cpu; + device_type = "cpu"; + reg = <0>; + clock-frequency = ; /* Fixed by bootwrapper */ + timebase-frequency = <1743000>; /* Fixed by bootwrapper */ + bus-frequency = <0>; /* From bootloader */ + /* Following required by dtc but not used */ + i-cache-line-size = <0>; + d-cache-line-size = <0>; + i-cache-size = <4000>; + d-cache-size = <4000>; + }; + }; + + memory { + linux,phandle = <3000>; + device_type = "memory"; + reg = <00000000 04000000>; + }; + + soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ + linux,phandle = <4000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + reg = <80000000 00100000>; + ranges = <80000000 80000000 70000000 /* pci mem space */ + fc000000 fc000000 00100000 /* EUMB */ + fe000000 fe000000 00c00000 /* pci i/o space */ + fec00000 fec00000 00300000 /* pci cfg regs */ + fef00000 fef00000 00100000>; /* pci iack */ + + i2c@80003000 { + linux,phandle = <4300>; + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <80003000 1000>; + interrupts = <5 2>; + interrupt-parent = <4400>; + }; + + serial@80004500 { + linux,phandle = <4511>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004500 8>; + clock-frequency = <5d08d88>; + current-speed = <2580>; + interrupts = <9 2>; + interrupt-parent = <4400>; + }; + + serial@80004600 { + linux,phandle = <4512>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004600 8>; + clock-frequency = <5d08d88>; + current-speed = ; + interrupts = ; + interrupt-parent = <4400>; + }; + + pic@80040000 { + linux,phandle = <4400>; + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <80040000 40000>; + built-in; + }; + + pci@fec00000 { + linux,phandle = <4500>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = ; + ranges = <01000000 0 0 fe000000 0 00c00000 + 02000000 0 80000000 80000000 0 70000000>; + bus-range = <0 ff>; + clock-frequency = <7f28155>; + interrupt-parent = <4400>; + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x11 - IRQ0 ETH */ + 5800 0 0 1 4400 0 1 + 5800 0 0 2 4400 1 1 + 5800 0 0 3 4400 2 1 + 5800 0 0 4 4400 3 1 + /* IDSEL 0x12 - IRQ1 IDE0 */ + 6000 0 0 1 4400 1 1 + 6000 0 0 2 4400 2 1 + 6000 0 0 3 4400 3 1 + 6000 0 0 4 4400 0 1 + /* IDSEL 0x14 - IRQ3 USB2.0 */ + 7000 0 0 1 4400 3 1 + 7000 0 0 2 4400 3 1 + 7000 0 0 3 4400 3 1 + 7000 0 0 4 4400 3 1 + >; + }; + }; +}; diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 405c1c908213..dde66a597a8d 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Mon Jan 22 22:17:58 2007 +# Linux kernel version: 2.6.20-rc6 +# Sun Jan 28 23:13:56 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -58,7 +58,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # -CONFIG_LOCALVERSION="-kuroboxHG" +CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y @@ -206,7 +206,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -# CONFIG_SECCOMP is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # @@ -312,39 +312,40 @@ CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set # CONFIG_NF_CONNTRACK_EVENTS is not set -# CONFIG_NF_CT_PROTO_SCTP is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m -# CONFIG_NF_CONNTRACK_H323 is not set +CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -# CONFIG_NF_CONNTRACK_SIP is not set +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set -CONFIG_NETFILTER_XT_TARGET_MARK=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATE is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set @@ -359,12 +360,12 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m # CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_RECENT is not set +CONFIG_IP_NF_MATCH_RECENT=m # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m # CONFIG_IP_NF_TARGET_LOG is not set @@ -374,16 +375,17 @@ CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set # CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m -# CONFIG_NF_NAT_AMANDA is not set -# CONFIG_NF_NAT_PPTP is not set -# CONFIG_NF_NAT_H323 is not set -# CONFIG_NF_NAT_SIP is not set +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -472,6 +474,7 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -518,6 +521,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0xffc00000 CONFIG_MTD_PHYSMAP_LEN=0x400000 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_PLATRAM is not set # @@ -540,6 +544,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -696,7 +701,7 @@ CONFIG_ATA=y # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set +CONFIG_PATA_IT821X=y # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -763,11 +768,33 @@ CONFIG_TUN=m # # PHY device support # +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # -# CONFIG_NET_ETHERNET is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=y +# CONFIG_TULIP_MWI is not set +CONFIG_TULIP_MMIO=y +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) @@ -829,7 +856,8 @@ CONFIG_NET_RADIO=y # CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set # CONFIG_BCM43XX is not set -# CONFIG_ZD1211RW is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set CONFIG_NET_WIRELESS=y # @@ -1098,7 +1126,7 @@ CONFIG_DUMMY_CONSOLE=y # # HID Devices # -CONFIG_HID=y +CONFIG_HID=m # # USB support @@ -1115,7 +1143,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1136,7 +1163,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # USB Device Class drivers # # CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set +CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1371,7 +1398,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set @@ -1461,7 +1492,12 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1495,7 +1531,7 @@ CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set +CONFIG_NLS_CODEPAGE_932=m # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set @@ -1526,12 +1562,14 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m CONFIG_PLIST=y CONFIG_IOMAP_COPY=y diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 61599d919ea8..3f6c4114f908 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include @@ -91,17 +90,6 @@ static void __init linkstation_setup_arch(void) ARRAY_SIZE(linkstation_physmap_partitions)); #endif -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - /* Lookup PCI host bridges */ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); -- cgit v1.2.2 From 99d4f22e91d26e0f8b113bf7fde65a335d36ad6b Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Sat, 10 Feb 2007 08:00:47 -0800 Subject: IB/mthca: Use correct structure size in call to memset() When clearing the ib_ah_attr parameter in to_ib_ah_attr(), use sizeof *ib_ah_attr instead of sizeof *path. Pointed out by Jack Morgenstein . Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 5f5214c0337d..224c93dd29eb 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -399,7 +399,7 @@ static int to_ib_qp_access_flags(int mthca_flags) static void to_ib_ah_attr(struct mthca_dev *dev, struct ib_ah_attr *ib_ah_attr, struct mthca_qp_path *path) { - memset(ib_ah_attr, 0, sizeof *path); + memset(ib_ah_attr, 0, sizeof *ib_ah_attr); ib_ah_attr->port_num = (be32_to_cpu(path->port_pkey) >> 24) & 0x3; if (ib_ah_attr->port_num == 0 || ib_ah_attr->port_num > dev->limits.num_ports) -- cgit v1.2.2 From 9a6b090c0d1cd5c90f21db772dbe2fbcf14366de Mon Sep 17 00:00:00 2001 From: "Ahmed S. Darwish" Date: Tue, 6 Feb 2007 18:07:25 +0200 Subject: IB/core: Use ARRAY_SIZE macro for mandatory_table Use ARRAY_SIZE() macro already defined in kernel.h instead of open coding equivalent code. Signed-off-by: Ahmed S. Darwish Signed-off-by: Roland Dreier --- drivers/infiniband/core/device.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index 63d2a39fb82c..7fabb425b033 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -93,7 +94,7 @@ static int ib_device_check_mandatory(struct ib_device *device) }; int i; - for (i = 0; i < sizeof mandatory_table / sizeof mandatory_table[0]; ++i) { + for (i = 0; i < ARRAY_SIZE(mandatory_table); ++i) { if (!*(void **) ((void *) device + mandatory_table[i].offset)) { printk(KERN_WARNING "Device %s is missing mandatory function %s\n", device->name, mandatory_table[i].name); -- cgit v1.2.2 From 839fcaba355abaffb7b44f0f4504093acb0b11cf Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 5 Feb 2007 22:12:23 +0200 Subject: IPoIB: Connected mode experimental support The following patch adds experimental support for IPoIB connected mode, as defined by the draft from the IETF ipoib working group. The idea is to increase performance by increasing the MTU from the maximum of 2K (theoretically 4K) supported by IPoIB on top of UD. With this code, I'm able to get 800MByte/sec or more with netperf without options on a Mellanox 4x back-to-back DDR system. Some notes on code: 1. SRQ is used for scalability to large cluster sizes 2. Only RC connections are used (UC does not support SRQ now) 3. Retry count is set to 0 since spec draft warns against retries 4. Each connection is used for data transfers in only 1 direction, so each connection is either active(TX) or passive (RX). 2 sides that want to communicate create 2 connections. 5. Each active (TX) connection has a separate CQ for send completions - this keeps the code simple without CQ resize and other tricks 6. To detect stale passive side connections (where the remote side is down), we keep an LRU list of passive connections (updated once per second per connection) and destroy a connection after it has been unused for several seconds. The LRU rule makes it possible to avoid scanning connections that have recently been active. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/Kconfig | 16 +- drivers/infiniband/ulp/ipoib/Makefile | 1 + drivers/infiniband/ulp/ipoib/ipoib.h | 215 ++++ drivers/infiniband/ulp/ipoib/ipoib_cm.c | 1237 ++++++++++++++++++++++++ drivers/infiniband/ulp/ipoib/ipoib_ib.c | 29 +- drivers/infiniband/ulp/ipoib/ipoib_main.c | 63 +- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 4 +- drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 40 +- drivers/infiniband/ulp/ipoib/ipoib_vlan.c | 2 + 9 files changed, 1575 insertions(+), 32 deletions(-) create mode 100644 drivers/infiniband/ulp/ipoib/ipoib_cm.c diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig index c75322d820d4..af78ccc4ce71 100644 --- a/drivers/infiniband/ulp/ipoib/Kconfig +++ b/drivers/infiniband/ulp/ipoib/Kconfig @@ -1,6 +1,6 @@ config INFINIBAND_IPOIB tristate "IP-over-InfiniBand" - depends on INFINIBAND && NETDEVICES && INET + depends on INFINIBAND && NETDEVICES && INET && (IPV6 || IPV6=n) ---help--- Support for the IP-over-InfiniBand protocol (IPoIB). This transports IP packets over InfiniBand so you can use your IB @@ -8,6 +8,20 @@ config INFINIBAND_IPOIB See Documentation/infiniband/ipoib.txt for more information +config INFINIBAND_IPOIB_CM + bool "IP-over-InfiniBand Connected Mode support" + depends on INFINIBAND_IPOIB && EXPERIMENTAL + default n + ---help--- + This option enables experimental support for IPoIB connected mode. + After enabling this option, you need to switch to connected mode through + /sys/class/net/ibXXX/mode to actually create connections, and then increase + the interface MTU with e.g. ifconfig ib0 mtu 65520. + + WARNING: Enabling connected mode will trigger some + packet drops for multicast and UD mode traffic from this interface, + unless you limit mtu for these destinations to 2044. + config INFINIBAND_IPOIB_DEBUG bool "IP-over-InfiniBand debugging" if EMBEDDED depends on INFINIBAND_IPOIB diff --git a/drivers/infiniband/ulp/ipoib/Makefile b/drivers/infiniband/ulp/ipoib/Makefile index 8935e74ae3f8..98ee38e8c2c4 100644 --- a/drivers/infiniband/ulp/ipoib/Makefile +++ b/drivers/infiniband/ulp/ipoib/Makefile @@ -5,5 +5,6 @@ ib_ipoib-y := ipoib_main.o \ ipoib_multicast.o \ ipoib_verbs.o \ ipoib_vlan.o +ib_ipoib-$(CONFIG_INFINIBAND_IPOIB_CM) += ipoib_cm.o ib_ipoib-$(CONFIG_INFINIBAND_IPOIB_DEBUG) += ipoib_fs.o diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 07deee8f81ce..2594db2030b3 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -62,6 +62,10 @@ enum { IPOIB_ENCAP_LEN = 4, + IPOIB_CM_MTU = 0x10000 - 0x10, /* padding to align header to 16 */ + IPOIB_CM_BUF_SIZE = IPOIB_CM_MTU + IPOIB_ENCAP_LEN, + IPOIB_CM_HEAD_SIZE = IPOIB_CM_BUF_SIZE % PAGE_SIZE, + IPOIB_CM_RX_SG = ALIGN(IPOIB_CM_BUF_SIZE, PAGE_SIZE) / PAGE_SIZE, IPOIB_RX_RING_SIZE = 128, IPOIB_TX_RING_SIZE = 64, IPOIB_MAX_QUEUE_SIZE = 8192, @@ -81,6 +85,8 @@ enum { IPOIB_MCAST_RUN = 6, IPOIB_STOP_REAPER = 7, IPOIB_MCAST_STARTED = 8, + IPOIB_FLAG_NETIF_STOPPED = 9, + IPOIB_FLAG_ADMIN_CM = 10, IPOIB_MAX_BACKOFF_SECONDS = 16, @@ -90,6 +96,13 @@ enum { IPOIB_MCAST_FLAG_ATTACHED = 3, }; +#define IPOIB_OP_RECV (1ul << 31) +#ifdef CONFIG_INFINIBAND_IPOIB_CM +#define IPOIB_CM_OP_SRQ (1ul << 30) +#else +#define IPOIB_CM_OP_SRQ (0) +#endif + /* structs */ struct ipoib_header { @@ -113,6 +126,59 @@ struct ipoib_tx_buf { u64 mapping; }; +struct ib_cm_id; + +struct ipoib_cm_data { + __be32 qpn; /* High byte MUST be ignored on receive */ + __be32 mtu; +}; + +struct ipoib_cm_rx { + struct ib_cm_id *id; + struct ib_qp *qp; + struct list_head list; + struct net_device *dev; + unsigned long jiffies; +}; + +struct ipoib_cm_tx { + struct ib_cm_id *id; + struct ib_cq *cq; + struct ib_qp *qp; + struct list_head list; + struct net_device *dev; + struct ipoib_neigh *neigh; + struct ipoib_path *path; + struct ipoib_tx_buf *tx_ring; + unsigned tx_head; + unsigned tx_tail; + unsigned long flags; + u32 mtu; + struct ib_wc ibwc[IPOIB_NUM_WC]; +}; + +struct ipoib_cm_rx_buf { + struct sk_buff *skb; + u64 mapping[IPOIB_CM_RX_SG]; +}; + +struct ipoib_cm_dev_priv { + struct ib_srq *srq; + struct ipoib_cm_rx_buf *srq_ring; + struct ib_cm_id *id; + struct list_head passive_ids; + struct work_struct start_task; + struct work_struct reap_task; + struct work_struct skb_task; + struct delayed_work stale_task; + struct sk_buff_head skb_queue; + struct list_head start_list; + struct list_head reap_list; + struct ib_wc ibwc[IPOIB_NUM_WC]; + struct ib_sge rx_sge[IPOIB_CM_RX_SG]; + struct ib_recv_wr rx_wr; +}; + /* * Device private locking: tx_lock protects members used in TX fast * path (and we use LLTX so upper layers don't do extra locking). @@ -179,6 +245,10 @@ struct ipoib_dev_priv { struct list_head child_intfs; struct list_head list; +#ifdef CONFIG_INFINIBAND_IPOIB_CM + struct ipoib_cm_dev_priv cm; +#endif + #ifdef CONFIG_INFINIBAND_IPOIB_DEBUG struct list_head fs_list; struct dentry *mcg_dentry; @@ -212,6 +282,9 @@ struct ipoib_path { struct ipoib_neigh { struct ipoib_ah *ah; +#ifdef CONFIG_INFINIBAND_IPOIB_CM + struct ipoib_cm_tx *cm; +#endif union ib_gid dgid; struct sk_buff_head queue; @@ -315,6 +388,146 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey); void ipoib_pkey_poll(struct work_struct *work); int ipoib_pkey_dev_delay_open(struct net_device *dev); +#ifdef CONFIG_INFINIBAND_IPOIB_CM + +#define IPOIB_FLAGS_RC 0x80 +#define IPOIB_FLAGS_UC 0x40 + +/* We don't support UC connections at the moment */ +#define IPOIB_CM_SUPPORTED(ha) (ha[0] & (IPOIB_FLAGS_RC)) + +static inline int ipoib_cm_admin_enabled(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + return IPOIB_CM_SUPPORTED(dev->dev_addr) && + test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); +} + +static inline int ipoib_cm_enabled(struct net_device *dev, struct neighbour *n) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + return IPOIB_CM_SUPPORTED(n->ha) && + test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); +} + +static inline int ipoib_cm_up(struct ipoib_neigh *neigh) + +{ + return test_bit(IPOIB_FLAG_OPER_UP, &neigh->cm->flags); +} + +static inline struct ipoib_cm_tx *ipoib_cm_get(struct ipoib_neigh *neigh) +{ + return neigh->cm; +} + +static inline void ipoib_cm_set(struct ipoib_neigh *neigh, struct ipoib_cm_tx *tx) +{ + neigh->cm = tx; +} + +void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx); +int ipoib_cm_dev_open(struct net_device *dev); +void ipoib_cm_dev_stop(struct net_device *dev); +int ipoib_cm_dev_init(struct net_device *dev); +int ipoib_cm_add_mode_attr(struct net_device *dev); +void ipoib_cm_dev_cleanup(struct net_device *dev); +struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path *path, + struct ipoib_neigh *neigh); +void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx); +void ipoib_cm_skb_too_long(struct net_device* dev, struct sk_buff *skb, + unsigned int mtu); +void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc); +#else + +struct ipoib_cm_tx; + +static inline int ipoib_cm_admin_enabled(struct net_device *dev) +{ + return 0; +} +static inline int ipoib_cm_enabled(struct net_device *dev, struct neighbour *n) + +{ + return 0; +} + +static inline int ipoib_cm_up(struct ipoib_neigh *neigh) + +{ + return 0; +} + +static inline struct ipoib_cm_tx *ipoib_cm_get(struct ipoib_neigh *neigh) +{ + return NULL; +} + +static inline void ipoib_cm_set(struct ipoib_neigh *neigh, struct ipoib_cm_tx *tx) +{ +} + +static inline +void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx) +{ + return; +} + +static inline +int ipoib_cm_dev_open(struct net_device *dev) +{ + return 0; +} + +static inline +void ipoib_cm_dev_stop(struct net_device *dev) +{ + return; +} + +static inline +int ipoib_cm_dev_init(struct net_device *dev) +{ + return -ENOSYS; +} + +static inline +void ipoib_cm_dev_cleanup(struct net_device *dev) +{ + return; +} + +static inline +struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path *path, + struct ipoib_neigh *neigh) +{ + return NULL; +} + +static inline +void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx) +{ + return; +} + +static inline +int ipoib_cm_add_mode_attr(struct net_device *dev) +{ + return 0; +} + +static inline void ipoib_cm_skb_too_long(struct net_device* dev, struct sk_buff *skb, + unsigned int mtu) +{ + dev_kfree_skb_any(skb); +} + +static inline void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) +{ +} + +#endif + #ifdef CONFIG_INFINIBAND_IPOIB_DEBUG void ipoib_create_debug_files(struct net_device *dev); void ipoib_delete_debug_files(struct net_device *dev); @@ -392,4 +605,6 @@ extern int ipoib_debug_level; #define IPOIB_GID_ARG(gid) IPOIB_GID_RAW_ARG((gid).raw) +#define IPOIB_QPN(ha) (be32_to_cpup((__be32 *) ha) & 0xffffff) + #endif /* _IPOIB_H */ diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c new file mode 100644 index 000000000000..2d483874a589 --- /dev/null +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -0,0 +1,1237 @@ +/* + * Copyright (c) 2006 Mellanox Technologies. All rights reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + * $Id$ + */ + +#include +#include +#include +#include +#include + +#ifdef CONFIG_INFINIBAND_IPOIB_DEBUG_DATA +static int data_debug_level; + +module_param_named(cm_data_debug_level, data_debug_level, int, 0644); +MODULE_PARM_DESC(cm_data_debug_level, + "Enable data path debug tracing for connected mode if > 0"); +#endif + +#include "ipoib.h" + +#define IPOIB_CM_IETF_ID 0x1000000000000000ULL + +#define IPOIB_CM_RX_UPDATE_TIME (256 * HZ) +#define IPOIB_CM_RX_TIMEOUT (2 * 256 * HZ) +#define IPOIB_CM_RX_DELAY (3 * 256 * HZ) +#define IPOIB_CM_RX_UPDATE_MASK (0x3) + +struct ipoib_cm_id { + struct ib_cm_id *id; + int flags; + u32 remote_qpn; + u32 remote_mtu; +}; + +static int ipoib_cm_tx_handler(struct ib_cm_id *cm_id, + struct ib_cm_event *event); + +static void ipoib_cm_dma_unmap_rx(struct ipoib_dev_priv *priv, + u64 mapping[IPOIB_CM_RX_SG]) +{ + int i; + + ib_dma_unmap_single(priv->ca, mapping[0], IPOIB_CM_HEAD_SIZE, DMA_FROM_DEVICE); + + for (i = 0; i < IPOIB_CM_RX_SG - 1; ++i) + ib_dma_unmap_single(priv->ca, mapping[i + 1], PAGE_SIZE, DMA_FROM_DEVICE); +} + +static int ipoib_cm_post_receive(struct net_device *dev, int id) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_recv_wr *bad_wr; + int i, ret; + + priv->cm.rx_wr.wr_id = id | IPOIB_CM_OP_SRQ; + + for (i = 0; i < IPOIB_CM_RX_SG; ++i) + priv->cm.rx_sge[i].addr = priv->cm.srq_ring[id].mapping[i]; + + ret = ib_post_srq_recv(priv->cm.srq, &priv->cm.rx_wr, &bad_wr); + if (unlikely(ret)) { + ipoib_warn(priv, "post srq failed for buf %d (%d)\n", id, ret); + ipoib_cm_dma_unmap_rx(priv, priv->cm.srq_ring[id].mapping); + dev_kfree_skb_any(priv->cm.srq_ring[id].skb); + priv->cm.srq_ring[id].skb = NULL; + } + + return ret; +} + +static int ipoib_cm_alloc_rx_skb(struct net_device *dev, int id, + u64 mapping[IPOIB_CM_RX_SG]) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct sk_buff *skb; + int i; + + skb = dev_alloc_skb(IPOIB_CM_HEAD_SIZE + 12); + if (unlikely(!skb)) + return -ENOMEM; + + /* + * IPoIB adds a 4 byte header. So we need 12 more bytes to align the + * IP header to a multiple of 16. + */ + skb_reserve(skb, 12); + + mapping[0] = ib_dma_map_single(priv->ca, skb->data, IPOIB_CM_HEAD_SIZE, + DMA_FROM_DEVICE); + if (unlikely(ib_dma_mapping_error(priv->ca, mapping[0]))) { + dev_kfree_skb_any(skb); + return -EIO; + } + + for (i = 0; i < IPOIB_CM_RX_SG - 1; i++) { + struct page *page = alloc_page(GFP_ATOMIC); + + if (!page) + goto partial_error; + skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE); + + mapping[i + 1] = ib_dma_map_page(priv->ca, skb_shinfo(skb)->frags[i].page, + 0, PAGE_SIZE, DMA_TO_DEVICE); + if (unlikely(ib_dma_mapping_error(priv->ca, mapping[i + 1]))) + goto partial_error; + } + + priv->cm.srq_ring[id].skb = skb; + return 0; + +partial_error: + + ib_dma_unmap_single(priv->ca, mapping[0], IPOIB_CM_HEAD_SIZE, DMA_FROM_DEVICE); + + for (; i >= 0; --i) + ib_dma_unmap_single(priv->ca, mapping[i + 1], PAGE_SIZE, DMA_FROM_DEVICE); + + kfree_skb(skb); + return -ENOMEM; +} + +static struct ib_qp *ipoib_cm_create_rx_qp(struct net_device *dev, + struct ipoib_cm_rx *p) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_qp_init_attr attr = { + .send_cq = priv->cq, /* does not matter, we never send anything */ + .recv_cq = priv->cq, + .srq = priv->cm.srq, + .cap.max_send_wr = 1, /* FIXME: 0 Seems not to work */ + .cap.max_send_sge = 1, /* FIXME: 0 Seems not to work */ + .sq_sig_type = IB_SIGNAL_ALL_WR, + .qp_type = IB_QPT_RC, + .qp_context = p, + }; + return ib_create_qp(priv->pd, &attr); +} + +static int ipoib_cm_modify_rx_qp(struct net_device *dev, + struct ib_cm_id *cm_id, struct ib_qp *qp, + unsigned psn) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_qp_attr qp_attr; + int qp_attr_mask, ret; + + qp_attr.qp_state = IB_QPS_INIT; + ret = ib_cm_init_qp_attr(cm_id, &qp_attr, &qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to init QP attr for INIT: %d\n", ret); + return ret; + } + ret = ib_modify_qp(qp, &qp_attr, qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to modify QP to INIT: %d\n", ret); + return ret; + } + qp_attr.qp_state = IB_QPS_RTR; + ret = ib_cm_init_qp_attr(cm_id, &qp_attr, &qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to init QP attr for RTR: %d\n", ret); + return ret; + } + qp_attr.rq_psn = psn; + ret = ib_modify_qp(qp, &qp_attr, qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to modify QP to RTR: %d\n", ret); + return ret; + } + return 0; +} + +static int ipoib_cm_send_rep(struct net_device *dev, struct ib_cm_id *cm_id, + struct ib_qp *qp, struct ib_cm_req_event_param *req, + unsigned psn) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_data data = {}; + struct ib_cm_rep_param rep = {}; + + data.qpn = cpu_to_be32(priv->qp->qp_num); + data.mtu = cpu_to_be32(IPOIB_CM_BUF_SIZE); + + rep.private_data = &data; + rep.private_data_len = sizeof data; + rep.flow_control = 0; + rep.rnr_retry_count = req->rnr_retry_count; + rep.target_ack_delay = 20; /* FIXME */ + rep.srq = 1; + rep.qp_num = qp->qp_num; + rep.starting_psn = psn; + return ib_send_cm_rep(cm_id, &rep); +} + +static int ipoib_cm_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event) +{ + struct net_device *dev = cm_id->context; + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_rx *p; + unsigned long flags; + unsigned psn; + int ret; + + ipoib_dbg(priv, "REQ arrived\n"); + p = kzalloc(sizeof *p, GFP_KERNEL); + if (!p) + return -ENOMEM; + p->dev = dev; + p->id = cm_id; + p->qp = ipoib_cm_create_rx_qp(dev, p); + if (IS_ERR(p->qp)) { + ret = PTR_ERR(p->qp); + goto err_qp; + } + + psn = random32() & 0xffffff; + ret = ipoib_cm_modify_rx_qp(dev, cm_id, p->qp, psn); + if (ret) + goto err_modify; + + ret = ipoib_cm_send_rep(dev, cm_id, p->qp, &event->param.req_rcvd, psn); + if (ret) { + ipoib_warn(priv, "failed to send REP: %d\n", ret); + goto err_rep; + } + + cm_id->context = p; + p->jiffies = jiffies; + spin_lock_irqsave(&priv->lock, flags); + list_add(&p->list, &priv->cm.passive_ids); + spin_unlock_irqrestore(&priv->lock, flags); + queue_delayed_work(ipoib_workqueue, + &priv->cm.stale_task, IPOIB_CM_RX_DELAY); + return 0; + +err_rep: +err_modify: + ib_destroy_qp(p->qp); +err_qp: + kfree(p); + return ret; +} + +static int ipoib_cm_rx_handler(struct ib_cm_id *cm_id, + struct ib_cm_event *event) +{ + struct ipoib_cm_rx *p; + struct ipoib_dev_priv *priv; + unsigned long flags; + int ret; + + switch (event->event) { + case IB_CM_REQ_RECEIVED: + return ipoib_cm_req_handler(cm_id, event); + case IB_CM_DREQ_RECEIVED: + p = cm_id->context; + ib_send_cm_drep(cm_id, NULL, 0); + /* Fall through */ + case IB_CM_REJ_RECEIVED: + p = cm_id->context; + priv = netdev_priv(p->dev); + spin_lock_irqsave(&priv->lock, flags); + if (list_empty(&p->list)) + ret = 0; /* Connection is going away already. */ + else { + list_del_init(&p->list); + ret = -ECONNRESET; + } + spin_unlock_irqrestore(&priv->lock, flags); + if (ret) { + ib_destroy_qp(p->qp); + kfree(p); + return ret; + } + return 0; + default: + return 0; + } +} +/* Adjust length of skb with fragments to match received data */ +static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space, + unsigned int length) +{ + int i, num_frags; + unsigned int size; + + /* put header into skb */ + size = min(length, hdr_space); + skb->tail += size; + skb->len += size; + length -= size; + + num_frags = skb_shinfo(skb)->nr_frags; + for (i = 0; i < num_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + if (length == 0) { + /* don't need this page */ + __free_page(frag->page); + --skb_shinfo(skb)->nr_frags; + } else { + size = min(length, (unsigned) PAGE_SIZE); + + frag->size = size; + skb->data_len += size; + skb->truesize += size; + skb->len += size; + length -= size; + } + } +} + +void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + unsigned int wr_id = wc->wr_id & ~IPOIB_CM_OP_SRQ; + struct sk_buff *skb; + struct ipoib_cm_rx *p; + unsigned long flags; + u64 mapping[IPOIB_CM_RX_SG]; + + ipoib_dbg_data(priv, "cm recv completion: id %d, op %d, status: %d\n", + wr_id, wc->opcode, wc->status); + + if (unlikely(wr_id >= ipoib_recvq_size)) { + ipoib_warn(priv, "cm recv completion event with wrid %d (> %d)\n", + wr_id, ipoib_recvq_size); + return; + } + + skb = priv->cm.srq_ring[wr_id].skb; + + if (unlikely(wc->status != IB_WC_SUCCESS)) { + ipoib_dbg(priv, "cm recv error " + "(status=%d, wrid=%d vend_err %x)\n", + wc->status, wr_id, wc->vendor_err); + ++priv->stats.rx_dropped; + goto repost; + } + + if (!likely(wr_id & IPOIB_CM_RX_UPDATE_MASK)) { + p = wc->qp->qp_context; + if (time_after_eq(jiffies, p->jiffies + IPOIB_CM_RX_UPDATE_TIME)) { + spin_lock_irqsave(&priv->lock, flags); + p->jiffies = jiffies; + /* Move this entry to list head, but do + * not re-add it if it has been removed. */ + if (!list_empty(&p->list)) + list_move(&p->list, &priv->cm.passive_ids); + spin_unlock_irqrestore(&priv->lock, flags); + queue_delayed_work(ipoib_workqueue, + &priv->cm.stale_task, IPOIB_CM_RX_DELAY); + } + } + + if (unlikely(ipoib_cm_alloc_rx_skb(dev, wr_id, mapping))) { + /* + * If we can't allocate a new RX buffer, dump + * this packet and reuse the old buffer. + */ + ipoib_dbg(priv, "failed to allocate receive buffer %d\n", wr_id); + ++priv->stats.rx_dropped; + goto repost; + } + + ipoib_cm_dma_unmap_rx(priv, priv->cm.srq_ring[wr_id].mapping); + memcpy(priv->cm.srq_ring[wr_id].mapping, mapping, sizeof mapping); + + ipoib_dbg_data(priv, "received %d bytes, SLID 0x%04x\n", + wc->byte_len, wc->slid); + + skb_put_frags(skb, IPOIB_CM_HEAD_SIZE, wc->byte_len); + + skb->protocol = ((struct ipoib_header *) skb->data)->proto; + skb->mac.raw = skb->data; + skb_pull(skb, IPOIB_ENCAP_LEN); + + dev->last_rx = jiffies; + ++priv->stats.rx_packets; + priv->stats.rx_bytes += skb->len; + + skb->dev = dev; + /* XXX get correct PACKET_ type here */ + skb->pkt_type = PACKET_HOST; + netif_rx_ni(skb); + +repost: + if (unlikely(ipoib_cm_post_receive(dev, wr_id))) + ipoib_warn(priv, "ipoib_cm_post_receive failed " + "for buf %d\n", wr_id); +} + +static inline int post_send(struct ipoib_dev_priv *priv, + struct ipoib_cm_tx *tx, + unsigned int wr_id, + u64 addr, int len) +{ + struct ib_send_wr *bad_wr; + + priv->tx_sge.addr = addr; + priv->tx_sge.length = len; + + priv->tx_wr.wr_id = wr_id; + + return ib_post_send(tx->qp, &priv->tx_wr, &bad_wr); +} + +void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_tx_buf *tx_req; + u64 addr; + + if (unlikely(skb->len > tx->mtu)) { + ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n", + skb->len, tx->mtu); + ++priv->stats.tx_dropped; + ++priv->stats.tx_errors; + ipoib_cm_skb_too_long(dev, skb, tx->mtu - INFINIBAND_ALEN); + return; + } + + ipoib_dbg_data(priv, "sending packet: head 0x%x length %d connection 0x%x\n", + tx->tx_head, skb->len, tx->qp->qp_num); + + /* + * We put the skb into the tx_ring _before_ we call post_send() + * because it's entirely possible that the completion handler will + * run before we execute anything after the post_send(). That + * means we have to make sure everything is properly recorded and + * our state is consistent before we call post_send(). + */ + tx_req = &tx->tx_ring[tx->tx_head & (ipoib_sendq_size - 1)]; + tx_req->skb = skb; + addr = ib_dma_map_single(priv->ca, skb->data, skb->len, DMA_TO_DEVICE); + if (unlikely(ib_dma_mapping_error(priv->ca, addr))) { + ++priv->stats.tx_errors; + dev_kfree_skb_any(skb); + return; + } + + tx_req->mapping = addr; + + if (unlikely(post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1), + addr, skb->len))) { + ipoib_warn(priv, "post_send failed\n"); + ++priv->stats.tx_errors; + ib_dma_unmap_single(priv->ca, addr, skb->len, DMA_TO_DEVICE); + dev_kfree_skb_any(skb); + } else { + dev->trans_start = jiffies; + ++tx->tx_head; + + if (tx->tx_head - tx->tx_tail == ipoib_sendq_size) { + ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n", + tx->qp->qp_num); + netif_stop_queue(dev); + set_bit(IPOIB_FLAG_NETIF_STOPPED, &tx->flags); + } + } +} + +static void ipoib_cm_handle_tx_wc(struct net_device *dev, struct ipoib_cm_tx *tx, + struct ib_wc *wc) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + unsigned int wr_id = wc->wr_id; + struct ipoib_tx_buf *tx_req; + unsigned long flags; + + ipoib_dbg_data(priv, "cm send completion: id %d, op %d, status: %d\n", + wr_id, wc->opcode, wc->status); + + if (unlikely(wr_id >= ipoib_sendq_size)) { + ipoib_warn(priv, "cm send completion event with wrid %d (> %d)\n", + wr_id, ipoib_sendq_size); + return; + } + + tx_req = &tx->tx_ring[wr_id]; + + ib_dma_unmap_single(priv->ca, tx_req->mapping, tx_req->skb->len, DMA_TO_DEVICE); + + /* FIXME: is this right? Shouldn't we only increment on success? */ + ++priv->stats.tx_packets; + priv->stats.tx_bytes += tx_req->skb->len; + + dev_kfree_skb_any(tx_req->skb); + + spin_lock_irqsave(&priv->tx_lock, flags); + ++tx->tx_tail; + if (unlikely(test_bit(IPOIB_FLAG_NETIF_STOPPED, &tx->flags)) && + tx->tx_head - tx->tx_tail <= ipoib_sendq_size >> 1) { + clear_bit(IPOIB_FLAG_NETIF_STOPPED, &tx->flags); + netif_wake_queue(dev); + } + + if (wc->status != IB_WC_SUCCESS && + wc->status != IB_WC_WR_FLUSH_ERR) { + struct ipoib_neigh *neigh; + + ipoib_dbg(priv, "failed cm send event " + "(status=%d, wrid=%d vend_err %x)\n", + wc->status, wr_id, wc->vendor_err); + + spin_lock(&priv->lock); + neigh = tx->neigh; + + if (neigh) { + neigh->cm = NULL; + list_del(&neigh->list); + if (neigh->ah) + ipoib_put_ah(neigh->ah); + ipoib_neigh_free(dev, neigh); + + tx->neigh = NULL; + } + + /* queue would be re-started anyway when TX is destroyed, + * but it makes sense to do it ASAP here. */ + if (test_and_clear_bit(IPOIB_FLAG_NETIF_STOPPED, &tx->flags)) + netif_wake_queue(dev); + + if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { + list_move(&tx->list, &priv->cm.reap_list); + queue_work(ipoib_workqueue, &priv->cm.reap_task); + } + + clear_bit(IPOIB_FLAG_OPER_UP, &tx->flags); + + spin_unlock(&priv->lock); + } + + spin_unlock_irqrestore(&priv->tx_lock, flags); +} + +static void ipoib_cm_tx_completion(struct ib_cq *cq, void *tx_ptr) +{ + struct ipoib_cm_tx *tx = tx_ptr; + int n, i; + + ib_req_notify_cq(cq, IB_CQ_NEXT_COMP); + do { + n = ib_poll_cq(cq, IPOIB_NUM_WC, tx->ibwc); + for (i = 0; i < n; ++i) + ipoib_cm_handle_tx_wc(tx->dev, tx, tx->ibwc + i); + } while (n == IPOIB_NUM_WC); +} + +int ipoib_cm_dev_open(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int ret; + + if (!IPOIB_CM_SUPPORTED(dev->dev_addr)) + return 0; + + priv->cm.id = ib_create_cm_id(priv->ca, ipoib_cm_rx_handler, dev); + if (IS_ERR(priv->cm.id)) { + printk(KERN_WARNING "%s: failed to create CM ID\n", priv->ca->name); + return IS_ERR(priv->cm.id); + } + + ret = ib_cm_listen(priv->cm.id, cpu_to_be64(IPOIB_CM_IETF_ID | priv->qp->qp_num), + 0, NULL); + if (ret) { + printk(KERN_WARNING "%s: failed to listen on ID 0x%llx\n", priv->ca->name, + IPOIB_CM_IETF_ID | priv->qp->qp_num); + ib_destroy_cm_id(priv->cm.id); + return ret; + } + return 0; +} + +void ipoib_cm_dev_stop(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_rx *p; + unsigned long flags; + + if (!IPOIB_CM_SUPPORTED(dev->dev_addr)) + return; + + ib_destroy_cm_id(priv->cm.id); + spin_lock_irqsave(&priv->lock, flags); + while (!list_empty(&priv->cm.passive_ids)) { + p = list_entry(priv->cm.passive_ids.next, typeof(*p), list); + list_del_init(&p->list); + spin_unlock_irqrestore(&priv->lock, flags); + ib_destroy_cm_id(p->id); + ib_destroy_qp(p->qp); + kfree(p); + spin_lock_irqsave(&priv->lock, flags); + } + spin_unlock_irqrestore(&priv->lock, flags); + + cancel_delayed_work(&priv->cm.stale_task); +} + +static int ipoib_cm_rep_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event) +{ + struct ipoib_cm_tx *p = cm_id->context; + struct ipoib_dev_priv *priv = netdev_priv(p->dev); + struct ipoib_cm_data *data = event->private_data; + struct sk_buff_head skqueue; + struct ib_qp_attr qp_attr; + int qp_attr_mask, ret; + struct sk_buff *skb; + unsigned long flags; + + p->mtu = be32_to_cpu(data->mtu); + + if (p->mtu < priv->dev->mtu + IPOIB_ENCAP_LEN) { + ipoib_warn(priv, "Rejecting connection: mtu %d < device mtu %d + 4\n", + p->mtu, priv->dev->mtu); + return -EINVAL; + } + + qp_attr.qp_state = IB_QPS_RTR; + ret = ib_cm_init_qp_attr(cm_id, &qp_attr, &qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to init QP attr for RTR: %d\n", ret); + return ret; + } + + qp_attr.rq_psn = 0 /* FIXME */; + ret = ib_modify_qp(p->qp, &qp_attr, qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to modify QP to RTR: %d\n", ret); + return ret; + } + + qp_attr.qp_state = IB_QPS_RTS; + ret = ib_cm_init_qp_attr(cm_id, &qp_attr, &qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to init QP attr for RTS: %d\n", ret); + return ret; + } + ret = ib_modify_qp(p->qp, &qp_attr, qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to modify QP to RTS: %d\n", ret); + return ret; + } + + skb_queue_head_init(&skqueue); + + spin_lock_irqsave(&priv->lock, flags); + set_bit(IPOIB_FLAG_OPER_UP, &p->flags); + if (p->neigh) + while ((skb = __skb_dequeue(&p->neigh->queue))) + __skb_queue_tail(&skqueue, skb); + spin_unlock_irqrestore(&priv->lock, flags); + + while ((skb = __skb_dequeue(&skqueue))) { + skb->dev = p->dev; + if (dev_queue_xmit(skb)) + ipoib_warn(priv, "dev_queue_xmit failed " + "to requeue packet\n"); + } + + ret = ib_send_cm_rtu(cm_id, NULL, 0); + if (ret) { + ipoib_warn(priv, "failed to send RTU: %d\n", ret); + return ret; + } + return 0; +} + +static struct ib_qp *ipoib_cm_create_tx_qp(struct net_device *dev, struct ib_cq *cq) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_qp_init_attr attr = {}; + attr.recv_cq = priv->cq; + attr.srq = priv->cm.srq; + attr.cap.max_send_wr = ipoib_sendq_size; + attr.cap.max_send_sge = 1; + attr.sq_sig_type = IB_SIGNAL_ALL_WR; + attr.qp_type = IB_QPT_RC; + attr.send_cq = cq; + return ib_create_qp(priv->pd, &attr); +} + +static int ipoib_cm_send_req(struct net_device *dev, + struct ib_cm_id *id, struct ib_qp *qp, + u32 qpn, + struct ib_sa_path_rec *pathrec) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_data data = {}; + struct ib_cm_req_param req = {}; + + data.qpn = cpu_to_be32(priv->qp->qp_num); + data.mtu = cpu_to_be32(IPOIB_CM_BUF_SIZE); + + req.primary_path = pathrec; + req.alternate_path = NULL; + req.service_id = cpu_to_be64(IPOIB_CM_IETF_ID | qpn); + req.qp_num = qp->qp_num; + req.qp_type = qp->qp_type; + req.private_data = &data; + req.private_data_len = sizeof data; + req.flow_control = 0; + + req.starting_psn = 0; /* FIXME */ + + /* + * Pick some arbitrary defaults here; we could make these + * module parameters if anyone cared about setting them. + */ + req.responder_resources = 4; + req.remote_cm_response_timeout = 20; + req.local_cm_response_timeout = 20; + req.retry_count = 0; /* RFC draft warns against retries */ + req.rnr_retry_count = 0; /* RFC draft warns against retries */ + req.max_cm_retries = 15; + req.srq = 1; + return ib_send_cm_req(id, &req); +} + +static int ipoib_cm_modify_tx_init(struct net_device *dev, + struct ib_cm_id *cm_id, struct ib_qp *qp) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_qp_attr qp_attr; + int qp_attr_mask, ret; + ret = ib_find_cached_pkey(priv->ca, priv->port, priv->pkey, &qp_attr.pkey_index); + if (ret) { + ipoib_warn(priv, "pkey 0x%x not in cache: %d\n", priv->pkey, ret); + return ret; + } + + qp_attr.qp_state = IB_QPS_INIT; + qp_attr.qp_access_flags = IB_ACCESS_LOCAL_WRITE; + qp_attr.port_num = priv->port; + qp_attr_mask = IB_QP_STATE | IB_QP_ACCESS_FLAGS | IB_QP_PKEY_INDEX | IB_QP_PORT; + + ret = ib_modify_qp(qp, &qp_attr, qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to modify tx QP to INIT: %d\n", ret); + return ret; + } + return 0; +} + +static int ipoib_cm_tx_init(struct ipoib_cm_tx *p, u32 qpn, + struct ib_sa_path_rec *pathrec) +{ + struct ipoib_dev_priv *priv = netdev_priv(p->dev); + int ret; + + p->tx_ring = kzalloc(ipoib_sendq_size * sizeof *p->tx_ring, + GFP_KERNEL); + if (!p->tx_ring) { + ipoib_warn(priv, "failed to allocate tx ring\n"); + ret = -ENOMEM; + goto err_tx; + } + + p->cq = ib_create_cq(priv->ca, ipoib_cm_tx_completion, NULL, p, + ipoib_sendq_size + 1); + if (IS_ERR(p->cq)) { + ret = PTR_ERR(p->cq); + ipoib_warn(priv, "failed to allocate tx cq: %d\n", ret); + goto err_cq; + } + + ret = ib_req_notify_cq(p->cq, IB_CQ_NEXT_COMP); + if (ret) { + ipoib_warn(priv, "failed to request completion notification: %d\n", ret); + goto err_req_notify; + } + + p->qp = ipoib_cm_create_tx_qp(p->dev, p->cq); + if (IS_ERR(p->qp)) { + ret = PTR_ERR(p->qp); + ipoib_warn(priv, "failed to allocate tx qp: %d\n", ret); + goto err_qp; + } + + p->id = ib_create_cm_id(priv->ca, ipoib_cm_tx_handler, p); + if (IS_ERR(p->id)) { + ret = PTR_ERR(p->id); + ipoib_warn(priv, "failed to create tx cm id: %d\n", ret); + goto err_id; + } + + ret = ipoib_cm_modify_tx_init(p->dev, p->id, p->qp); + if (ret) { + ipoib_warn(priv, "failed to modify tx qp to rtr: %d\n", ret); + goto err_modify; + } + + ret = ipoib_cm_send_req(p->dev, p->id, p->qp, qpn, pathrec); + if (ret) { + ipoib_warn(priv, "failed to send cm req: %d\n", ret); + goto err_send_cm; + } + + ipoib_dbg(priv, "Request connection 0x%x for gid " IPOIB_GID_FMT " qpn 0x%x\n", + p->qp->qp_num, IPOIB_GID_ARG(pathrec->dgid), qpn); + + return 0; + +err_send_cm: +err_modify: + ib_destroy_cm_id(p->id); +err_id: + p->id = NULL; + ib_destroy_qp(p->qp); +err_req_notify: +err_qp: + p->qp = NULL; + ib_destroy_cq(p->cq); +err_cq: + p->cq = NULL; +err_tx: + return ret; +} + +static void ipoib_cm_tx_destroy(struct ipoib_cm_tx *p) +{ + struct ipoib_dev_priv *priv = netdev_priv(p->dev); + struct ipoib_tx_buf *tx_req; + + ipoib_dbg(priv, "Destroy active connection 0x%x head 0x%x tail 0x%x\n", + p->qp ? p->qp->qp_num : 0, p->tx_head, p->tx_tail); + + if (p->id) + ib_destroy_cm_id(p->id); + + if (p->qp) + ib_destroy_qp(p->qp); + + if (p->cq) + ib_destroy_cq(p->cq); + + if (test_bit(IPOIB_FLAG_NETIF_STOPPED, &p->flags)) + netif_wake_queue(p->dev); + + if (p->tx_ring) { + while ((int) p->tx_tail - (int) p->tx_head < 0) { + tx_req = &p->tx_ring[p->tx_tail & (ipoib_sendq_size - 1)]; + ib_dma_unmap_single(priv->ca, tx_req->mapping, tx_req->skb->len, + DMA_TO_DEVICE); + dev_kfree_skb_any(tx_req->skb); + ++p->tx_tail; + } + + kfree(p->tx_ring); + } + + kfree(p); +} + +static int ipoib_cm_tx_handler(struct ib_cm_id *cm_id, + struct ib_cm_event *event) +{ + struct ipoib_cm_tx *tx = cm_id->context; + struct ipoib_dev_priv *priv = netdev_priv(tx->dev); + struct net_device *dev = priv->dev; + struct ipoib_neigh *neigh; + unsigned long flags; + int ret; + + switch (event->event) { + case IB_CM_DREQ_RECEIVED: + ipoib_dbg(priv, "DREQ received.\n"); + ib_send_cm_drep(cm_id, NULL, 0); + break; + case IB_CM_REP_RECEIVED: + ipoib_dbg(priv, "REP received.\n"); + ret = ipoib_cm_rep_handler(cm_id, event); + if (ret) + ib_send_cm_rej(cm_id, IB_CM_REJ_CONSUMER_DEFINED, + NULL, 0, NULL, 0); + break; + case IB_CM_REQ_ERROR: + case IB_CM_REJ_RECEIVED: + case IB_CM_TIMEWAIT_EXIT: + ipoib_dbg(priv, "CM error %d.\n", event->event); + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + neigh = tx->neigh; + + if (neigh) { + neigh->cm = NULL; + list_del(&neigh->list); + if (neigh->ah) + ipoib_put_ah(neigh->ah); + ipoib_neigh_free(dev, neigh); + + tx->neigh = NULL; + } + + if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { + list_move(&tx->list, &priv->cm.reap_list); + queue_work(ipoib_workqueue, &priv->cm.reap_task); + } + + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); + break; + default: + break; + } + + return 0; +} + +struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path *path, + struct ipoib_neigh *neigh) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_tx *tx; + + tx = kzalloc(sizeof *tx, GFP_ATOMIC); + if (!tx) + return NULL; + + neigh->cm = tx; + tx->neigh = neigh; + tx->path = path; + tx->dev = dev; + list_add(&tx->list, &priv->cm.start_list); + set_bit(IPOIB_FLAG_INITIALIZED, &tx->flags); + queue_work(ipoib_workqueue, &priv->cm.start_task); + return tx; +} + +void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx) +{ + struct ipoib_dev_priv *priv = netdev_priv(tx->dev); + if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &tx->flags)) { + list_move(&tx->list, &priv->cm.reap_list); + queue_work(ipoib_workqueue, &priv->cm.reap_task); + ipoib_dbg(priv, "Reap connection for gid " IPOIB_GID_FMT "\n", + IPOIB_GID_ARG(tx->neigh->dgid)); + tx->neigh = NULL; + } +} + +static void ipoib_cm_tx_start(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, + cm.start_task); + struct net_device *dev = priv->dev; + struct ipoib_neigh *neigh; + struct ipoib_cm_tx *p; + unsigned long flags; + int ret; + + struct ib_sa_path_rec pathrec; + u32 qpn; + + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + while (!list_empty(&priv->cm.start_list)) { + p = list_entry(priv->cm.start_list.next, typeof(*p), list); + list_del_init(&p->list); + neigh = p->neigh; + qpn = IPOIB_QPN(neigh->neighbour->ha); + memcpy(&pathrec, &p->path->pathrec, sizeof pathrec); + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); + ret = ipoib_cm_tx_init(p, qpn, &pathrec); + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + if (ret) { + neigh = p->neigh; + if (neigh) { + neigh->cm = NULL; + list_del(&neigh->list); + if (neigh->ah) + ipoib_put_ah(neigh->ah); + ipoib_neigh_free(dev, neigh); + } + list_del(&p->list); + kfree(p); + } + } + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); +} + +static void ipoib_cm_tx_reap(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, + cm.reap_task); + struct ipoib_cm_tx *p; + unsigned long flags; + + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + while (!list_empty(&priv->cm.reap_list)) { + p = list_entry(priv->cm.reap_list.next, typeof(*p), list); + list_del(&p->list); + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); + ipoib_cm_tx_destroy(p); + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + } + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); +} + +static void ipoib_cm_skb_reap(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, + cm.skb_task); + struct net_device *dev = priv->dev; + struct sk_buff *skb; + unsigned long flags; + + unsigned mtu = priv->mcast_mtu; + + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + while ((skb = skb_dequeue(&priv->cm.skb_queue))) { + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); + if (skb->protocol == htons(ETH_P_IP)) + icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu)); +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + else if (skb->protocol == htons(ETH_P_IPV6)) + icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, dev); +#endif + dev_kfree_skb_any(skb); + spin_lock_irqsave(&priv->tx_lock, flags); + spin_lock(&priv->lock); + } + spin_unlock(&priv->lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); +} + +void ipoib_cm_skb_too_long(struct net_device* dev, struct sk_buff *skb, + unsigned int mtu) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int e = skb_queue_empty(&priv->cm.skb_queue); + + if (skb->dst) + skb->dst->ops->update_pmtu(skb->dst, mtu); + + skb_queue_tail(&priv->cm.skb_queue, skb); + if (e) + queue_work(ipoib_workqueue, &priv->cm.skb_task); +} + +static void ipoib_cm_stale_task(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, + cm.stale_task.work); + struct ipoib_cm_rx *p; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + while (!list_empty(&priv->cm.passive_ids)) { + /* List if sorted by LRU, start from tail, + * stop when we see a recently used entry */ + p = list_entry(priv->cm.passive_ids.prev, typeof(*p), list); + if (time_after_eq(jiffies, p->jiffies + IPOIB_CM_RX_TIMEOUT)) + break; + list_del_init(&p->list); + spin_unlock_irqrestore(&priv->lock, flags); + ib_destroy_cm_id(p->id); + ib_destroy_qp(p->qp); + kfree(p); + spin_lock_irqsave(&priv->lock, flags); + } + spin_unlock_irqrestore(&priv->lock, flags); +} + + +static ssize_t show_mode(struct device *d, struct device_attribute *attr, + char *buf) +{ + struct ipoib_dev_priv *priv = netdev_priv(to_net_dev(d)); + + if (test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags)) + return sprintf(buf, "connected\n"); + else + return sprintf(buf, "datagram\n"); +} + +static ssize_t set_mode(struct device *d, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(d); + struct ipoib_dev_priv *priv = netdev_priv(dev); + + /* flush paths if we switch modes so that connections are restarted */ + if (IPOIB_CM_SUPPORTED(dev->dev_addr) && !strcmp(buf, "connected\n")) { + set_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); + ipoib_warn(priv, "enabling connected mode " + "will cause multicast packet drops\n"); + ipoib_flush_paths(dev); + return count; + } + + if (!strcmp(buf, "datagram\n")) { + clear_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); + dev->mtu = min(priv->mcast_mtu, dev->mtu); + ipoib_flush_paths(dev); + return count; + } + + return -EINVAL; +} + +static DEVICE_ATTR(mode, S_IWUGO | S_IRUGO, show_mode, set_mode); + +int ipoib_cm_add_mode_attr(struct net_device *dev) +{ + return device_create_file(&dev->dev, &dev_attr_mode); +} + +int ipoib_cm_dev_init(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_srq_init_attr srq_init_attr = { + .attr = { + .max_wr = ipoib_recvq_size, + .max_sge = IPOIB_CM_RX_SG + } + }; + int ret, i; + + INIT_LIST_HEAD(&priv->cm.passive_ids); + INIT_LIST_HEAD(&priv->cm.reap_list); + INIT_LIST_HEAD(&priv->cm.start_list); + INIT_WORK(&priv->cm.start_task, ipoib_cm_tx_start); + INIT_WORK(&priv->cm.reap_task, ipoib_cm_tx_reap); + INIT_WORK(&priv->cm.skb_task, ipoib_cm_skb_reap); + INIT_DELAYED_WORK(&priv->cm.stale_task, ipoib_cm_stale_task); + + skb_queue_head_init(&priv->cm.skb_queue); + + priv->cm.srq = ib_create_srq(priv->pd, &srq_init_attr); + if (IS_ERR(priv->cm.srq)) { + ret = PTR_ERR(priv->cm.srq); + priv->cm.srq = NULL; + return ret; + } + + priv->cm.srq_ring = kzalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring, + GFP_KERNEL); + if (!priv->cm.srq_ring) { + printk(KERN_WARNING "%s: failed to allocate CM ring (%d entries)\n", + priv->ca->name, ipoib_recvq_size); + ipoib_cm_dev_cleanup(dev); + return -ENOMEM; + } + + for (i = 0; i < IPOIB_CM_RX_SG; ++i) + priv->cm.rx_sge[i].lkey = priv->mr->lkey; + + priv->cm.rx_sge[0].length = IPOIB_CM_HEAD_SIZE; + for (i = 1; i < IPOIB_CM_RX_SG; ++i) + priv->cm.rx_sge[i].length = PAGE_SIZE; + priv->cm.rx_wr.next = NULL; + priv->cm.rx_wr.sg_list = priv->cm.rx_sge; + priv->cm.rx_wr.num_sge = IPOIB_CM_RX_SG; + + for (i = 0; i < ipoib_recvq_size; ++i) { + if (ipoib_cm_alloc_rx_skb(dev, i, priv->cm.srq_ring[i].mapping)) { + ipoib_warn(priv, "failed to allocate receive buffer %d\n", i); + ipoib_cm_dev_cleanup(dev); + return -ENOMEM; + } + if (ipoib_cm_post_receive(dev, i)) { + ipoib_warn(priv, "ipoib_ib_post_receive failed for buf %d\n", i); + ipoib_cm_dev_cleanup(dev); + return -EIO; + } + } + + priv->dev->dev_addr[0] = IPOIB_FLAGS_RC; + return 0; +} + +void ipoib_cm_dev_cleanup(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int i, ret; + + if (!priv->cm.srq) + return; + + ipoib_dbg(priv, "Cleanup ipoib connected mode.\n"); + + ret = ib_destroy_srq(priv->cm.srq); + if (ret) + ipoib_warn(priv, "ib_destroy_srq failed: %d\n", ret); + + priv->cm.srq = NULL; + if (!priv->cm.srq_ring) + return; + for (i = 0; i < ipoib_recvq_size; ++i) + if (priv->cm.srq_ring[i].skb) { + ipoib_cm_dma_unmap_rx(priv, priv->cm.srq_ring[i].mapping); + dev_kfree_skb_any(priv->cm.srq_ring[i].skb); + priv->cm.srq_ring[i].skb = NULL; + } + kfree(priv->cm.srq_ring); + priv->cm.srq_ring = NULL; +} diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 59d9594ed6d9..f2aa923ddbea 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -50,8 +50,6 @@ MODULE_PARM_DESC(data_debug_level, "Enable data path debug tracing if > 0"); #endif -#define IPOIB_OP_RECV (1ul << 31) - static DEFINE_MUTEX(pkey_mutex); struct ipoib_ah *ipoib_create_ah(struct net_device *dev, @@ -268,10 +266,11 @@ static void ipoib_ib_handle_tx_wc(struct net_device *dev, struct ib_wc *wc) spin_lock_irqsave(&priv->tx_lock, flags); ++priv->tx_tail; - if (netif_queue_stopped(dev) && - test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags) && - priv->tx_head - priv->tx_tail <= ipoib_sendq_size >> 1) + if (unlikely(test_bit(IPOIB_FLAG_NETIF_STOPPED, &priv->flags)) && + priv->tx_head - priv->tx_tail <= ipoib_sendq_size >> 1) { + clear_bit(IPOIB_FLAG_NETIF_STOPPED, &priv->flags); netif_wake_queue(dev); + } spin_unlock_irqrestore(&priv->tx_lock, flags); if (wc->status != IB_WC_SUCCESS && @@ -283,7 +282,9 @@ static void ipoib_ib_handle_tx_wc(struct net_device *dev, struct ib_wc *wc) static void ipoib_ib_handle_wc(struct net_device *dev, struct ib_wc *wc) { - if (wc->wr_id & IPOIB_OP_RECV) + if (wc->wr_id & IPOIB_CM_OP_SRQ) + ipoib_cm_handle_rx_wc(dev, wc); + else if (wc->wr_id & IPOIB_OP_RECV) ipoib_ib_handle_rx_wc(dev, wc); else ipoib_ib_handle_tx_wc(dev, wc); @@ -327,12 +328,12 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_tx_buf *tx_req; u64 addr; - if (unlikely(skb->len > dev->mtu + INFINIBAND_ALEN)) { + if (unlikely(skb->len > priv->mcast_mtu + INFINIBAND_ALEN)) { ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n", - skb->len, dev->mtu + INFINIBAND_ALEN); + skb->len, priv->mcast_mtu + INFINIBAND_ALEN); ++priv->stats.tx_dropped; ++priv->stats.tx_errors; - dev_kfree_skb_any(skb); + ipoib_cm_skb_too_long(dev, skb, priv->mcast_mtu); return; } @@ -372,6 +373,7 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb, if (priv->tx_head - priv->tx_tail == ipoib_sendq_size) { ipoib_dbg(priv, "TX ring full, stopping kernel net queue\n"); netif_stop_queue(dev); + set_bit(IPOIB_FLAG_NETIF_STOPPED, &priv->flags); } } } @@ -424,6 +426,13 @@ int ipoib_ib_dev_open(struct net_device *dev) return -1; } + ret = ipoib_cm_dev_open(dev); + if (ret) { + ipoib_warn(priv, "ipoib_ib_post_receives returned %d\n", ret); + ipoib_ib_dev_stop(dev); + return -1; + } + clear_bit(IPOIB_STOP_REAPER, &priv->flags); queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task, HZ); @@ -509,6 +518,8 @@ int ipoib_ib_dev_stop(struct net_device *dev) clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags); + ipoib_cm_dev_stop(dev); + /* * Move our QP to the error state and then reinitialize in * when all work requests have completed or have been flushed. diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index af5ee2ec4499..18d27fd352ad 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -49,8 +49,6 @@ #include -#define IPOIB_QPN(ha) (be32_to_cpup((__be32 *) ha) & 0xffffff) - MODULE_AUTHOR("Roland Dreier"); MODULE_DESCRIPTION("IP-over-InfiniBand net driver"); MODULE_LICENSE("Dual BSD/GPL"); @@ -145,6 +143,8 @@ static int ipoib_stop(struct net_device *dev) netif_stop_queue(dev); + clear_bit(IPOIB_FLAG_NETIF_STOPPED, &priv->flags); + /* * Now flush workqueue to make sure a scheduled task doesn't * bring our internal state back up. @@ -178,8 +178,18 @@ static int ipoib_change_mtu(struct net_device *dev, int new_mtu) { struct ipoib_dev_priv *priv = netdev_priv(dev); - if (new_mtu > IPOIB_PACKET_SIZE - IPOIB_ENCAP_LEN) + /* dev->mtu > 2K ==> connected mode */ + if (ipoib_cm_admin_enabled(dev) && new_mtu <= IPOIB_CM_MTU) { + if (new_mtu > priv->mcast_mtu) + ipoib_warn(priv, "mtu > %d will cause multicast packet drops.\n", + priv->mcast_mtu); + dev->mtu = new_mtu; + return 0; + } + + if (new_mtu > IPOIB_PACKET_SIZE - IPOIB_ENCAP_LEN) { return -EINVAL; + } priv->admin_mtu = new_mtu; @@ -414,6 +424,20 @@ static void path_rec_completion(int status, memcpy(&neigh->dgid.raw, &path->pathrec.dgid.raw, sizeof(union ib_gid)); + if (ipoib_cm_enabled(dev, neigh->neighbour)) { + if (!ipoib_cm_get(neigh)) + ipoib_cm_set(neigh, ipoib_cm_create_tx(dev, + path, + neigh)); + if (!ipoib_cm_get(neigh)) { + list_del(&neigh->list); + if (neigh->ah) + ipoib_put_ah(neigh->ah); + ipoib_neigh_free(dev, neigh); + continue; + } + } + while ((skb = __skb_dequeue(&neigh->queue))) __skb_queue_tail(&skqueue, skb); } @@ -520,7 +544,25 @@ static void neigh_add_path(struct sk_buff *skb, struct net_device *dev) memcpy(&neigh->dgid.raw, &path->pathrec.dgid.raw, sizeof(union ib_gid)); - ipoib_send(dev, skb, path->ah, IPOIB_QPN(skb->dst->neighbour->ha)); + if (ipoib_cm_enabled(dev, neigh->neighbour)) { + if (!ipoib_cm_get(neigh)) + ipoib_cm_set(neigh, ipoib_cm_create_tx(dev, path, neigh)); + if (!ipoib_cm_get(neigh)) { + list_del(&neigh->list); + if (neigh->ah) + ipoib_put_ah(neigh->ah); + ipoib_neigh_free(dev, neigh); + goto err_drop; + } + if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) + __skb_queue_tail(&neigh->queue, skb); + else { + ipoib_warn(priv, "queue length limit %d. Packet drop.\n", + skb_queue_len(&neigh->queue)); + goto err_drop; + } + } else + ipoib_send(dev, skb, path->ah, IPOIB_QPN(skb->dst->neighbour->ha)); } else { neigh->ah = NULL; @@ -538,6 +580,7 @@ err_list: err_path: ipoib_neigh_free(dev, neigh); +err_drop: ++priv->stats.tx_dropped; dev_kfree_skb_any(skb); @@ -640,7 +683,12 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) neigh = *to_ipoib_neigh(skb->dst->neighbour); - if (likely(neigh->ah)) { + if (ipoib_cm_get(neigh)) { + if (ipoib_cm_up(neigh)) { + ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); + goto out; + } + } else if (neigh->ah) { if (unlikely(memcmp(&neigh->dgid.raw, skb->dst->neighbour->ha + 4, sizeof(union ib_gid)))) { @@ -805,6 +853,7 @@ struct ipoib_neigh *ipoib_neigh_alloc(struct neighbour *neighbour) neigh->neighbour = neighbour; *to_ipoib_neigh(neighbour) = neigh; skb_queue_head_init(&neigh->queue); + ipoib_cm_set(neigh, NULL); return neigh; } @@ -818,6 +867,8 @@ void ipoib_neigh_free(struct net_device *dev, struct ipoib_neigh *neigh) ++priv->stats.tx_dropped; dev_kfree_skb_any(skb); } + if (ipoib_cm_get(neigh)) + ipoib_cm_destroy_tx(ipoib_cm_get(neigh)); kfree(neigh); } @@ -1080,6 +1131,8 @@ static struct net_device *ipoib_add_port(const char *format, ipoib_create_debug_files(priv->dev); + if (ipoib_cm_add_mode_attr(priv->dev)) + goto sysfs_failed; if (ipoib_add_pkey_attr(priv->dev)) goto sysfs_failed; if (device_create_file(&priv->dev->dev, &dev_attr_create_child)) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index b04b72ca32ed..fea737f520fd 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -597,7 +597,9 @@ void ipoib_mcast_join_task(struct work_struct *work) priv->mcast_mtu = ib_mtu_enum_to_int(priv->broadcast->mcmember.mtu) - IPOIB_ENCAP_LEN; - dev->mtu = min(priv->mcast_mtu, priv->admin_mtu); + + if (!ipoib_cm_admin_enabled(dev)) + dev->mtu = min(priv->mcast_mtu, priv->admin_mtu); ipoib_dbg_mcast(priv, "successfully joined all multicast groups\n"); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 7b717c648f72..3cb551b88756 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -168,35 +168,41 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) .qp_type = IB_QPT_UD }; + int ret, size; + priv->pd = ib_alloc_pd(priv->ca); if (IS_ERR(priv->pd)) { printk(KERN_WARNING "%s: failed to allocate PD\n", ca->name); return -ENODEV; } - priv->cq = ib_create_cq(priv->ca, ipoib_ib_completion, NULL, dev, - ipoib_sendq_size + ipoib_recvq_size + 1); + priv->mr = ib_get_dma_mr(priv->pd, IB_ACCESS_LOCAL_WRITE); + if (IS_ERR(priv->mr)) { + printk(KERN_WARNING "%s: ib_get_dma_mr failed\n", ca->name); + goto out_free_pd; + } + + size = ipoib_sendq_size + ipoib_recvq_size + 1; + ret = ipoib_cm_dev_init(dev); + if (!ret) + size += ipoib_recvq_size; + + priv->cq = ib_create_cq(priv->ca, ipoib_ib_completion, NULL, dev, size); if (IS_ERR(priv->cq)) { printk(KERN_WARNING "%s: failed to create CQ\n", ca->name); - goto out_free_pd; + goto out_free_mr; } if (ib_req_notify_cq(priv->cq, IB_CQ_NEXT_COMP)) goto out_free_cq; - priv->mr = ib_get_dma_mr(priv->pd, IB_ACCESS_LOCAL_WRITE); - if (IS_ERR(priv->mr)) { - printk(KERN_WARNING "%s: ib_get_dma_mr failed\n", ca->name); - goto out_free_cq; - } - init_attr.send_cq = priv->cq; init_attr.recv_cq = priv->cq, priv->qp = ib_create_qp(priv->pd, &init_attr); if (IS_ERR(priv->qp)) { printk(KERN_WARNING "%s: failed to create QP\n", ca->name); - goto out_free_mr; + goto out_free_cq; } priv->dev->dev_addr[1] = (priv->qp->qp_num >> 16) & 0xff; @@ -212,12 +218,12 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) return 0; -out_free_mr: - ib_dereg_mr(priv->mr); - out_free_cq: ib_destroy_cq(priv->cq); +out_free_mr: + ib_dereg_mr(priv->mr); + out_free_pd: ib_dealloc_pd(priv->pd); return -ENODEV; @@ -235,12 +241,14 @@ void ipoib_transport_dev_cleanup(struct net_device *dev) clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); } - if (ib_dereg_mr(priv->mr)) - ipoib_warn(priv, "ib_dereg_mr failed\n"); - if (ib_destroy_cq(priv->cq)) ipoib_warn(priv, "ib_cq_destroy failed\n"); + ipoib_cm_dev_cleanup(dev); + + if (ib_dereg_mr(priv->mr)) + ipoib_warn(priv, "ib_dereg_mr failed\n"); + if (ib_dealloc_pd(priv->pd)) ipoib_warn(priv, "ib_dealloc_pd failed\n"); } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index 085eafe6667c..6762988439d1 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -115,6 +115,8 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) ipoib_create_debug_files(priv->dev); + if (ipoib_cm_add_mode_attr(priv->dev)) + goto sysfs_failed; if (ipoib_add_pkey_attr(priv->dev)) goto sysfs_failed; -- cgit v1.2.2 From 6bdd61d876e6eacea5c59230b6b2d988b22793e6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 5 Feb 2007 16:21:08 -0800 Subject: IB/mthca: Work around gcc bug on sparc64 For some reason gcc-3.4.5 on sparc64 does: WARNING: "____ilog2_NaN" [drivers/infiniband/hw/mthca/ib_mthca.ko] undefined! Points to note: (1) The asm volatile flush/flushw are just markers for viewing what comes out in the assembly; removing them has no effect on the result. (2) Changing almost anything else in dwh__mthca_arbel_init_srq_context() or dwh__mthca_alloc_srq() causes the problem to go away. The compiler command line issued by the kernel build is: /opt/crosstool/gcc-3.4.5-glibc-2.3.6/sparc64-unknown-linux-gnu/bin/sparc64-unknown-linux-gnu-gcc -fno-strict-aliasing -fno-common -Os -m64 -mno-fpu -mcpu=ultrasparc -mcmodel=medlow -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wa,--undeclared-regs -pg -fno-omit-frame-pointer -fno-optimize-sibling-calls -fasynchronous-unwind-tables -g -c -o drivers/infiniband/hw/mthca/.tmp_mthca_srq.o drivers/infiniband/hw/mthca/mthca_srq.c This can be reduced to this whilst still retaining the problem: /opt/crosstool/gcc-3.4.5-glibc-2.3.6/sparc64-unknown-linux-gnu/bin/sparc64-unknown-linux-gnu-gcc -m64 -c -o drivers/infiniband/hw/mthca/mthca_srq.o drivers/infiniband/hw/mthca/mthca_srq.c -Os Removing -Os or changing it to -O or -O0 thru -O6 gets rid of the problem. This patch to the kernel code fixes the problem: Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_srq.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c index 10684da33d58..61974b0296ca 100644 --- a/drivers/infiniband/hw/mthca/mthca_srq.c +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -116,11 +116,16 @@ static void mthca_arbel_init_srq_context(struct mthca_dev *dev, struct mthca_srq *srq, struct mthca_arbel_srq_context *context) { - int logsize; + int logsize, max; memset(context, 0, sizeof *context); - logsize = ilog2(srq->max); + /* + * Put max in a temporary variable to work around gcc bug + * triggered by ilog2() on sparc64. + */ + max = srq->max; + logsize = ilog2(max); context->state_logsize_srqn = cpu_to_be32(logsize << 24 | srq->srqn); context->lkey = cpu_to_be32(srq->mr.ibmr.lkey); context->db_index = cpu_to_be32(srq->db_index); -- cgit v1.2.2 From 65e5c0262169a92bdec71a8bb9edb32dab2d8d1f Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 5 Feb 2007 16:21:09 -0800 Subject: IB/ehca: Fix memleak on module unloading Percpu data is not freed on module unloading. Cc: Heiko Carstens Cc: Christoph Raisch Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Acked-by: Hoang-Nam Nguyen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_irq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index c069be8cbcb2..6c4f9f91b15d 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -756,6 +756,8 @@ void ehca_destroy_comp_pool(void) if (cpu_online(i)) destroy_comp_task(pool, i); } + free_percpu(pool->cpu_comp_tasks); + kfree(pool); #endif return; -- cgit v1.2.2 From aedec08050255db1989a38b59616dd973dfe660b Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 29 Jan 2007 16:41:23 -0800 Subject: RDMA/cma: Increment port number after close to avoid re-use Randomize the starting port number and avoid re-using port values immediately after they are closed. Instead keep track of the last port value used and increment it every time a new port number is assigned, to better replicate other port spaces. Signed-off-by: Roland Dreier --- drivers/infiniband/core/cma.c | 66 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 56 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 9e0ab048c878..bc31b54e9cac 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -71,6 +71,7 @@ static struct workqueue_struct *cma_wq; static DEFINE_IDR(sdp_ps); static DEFINE_IDR(tcp_ps); static DEFINE_IDR(udp_ps); +static int next_port; struct cma_device { struct list_head list; @@ -1722,33 +1723,74 @@ static int cma_alloc_port(struct idr *ps, struct rdma_id_private *id_priv, unsigned short snum) { struct rdma_bind_list *bind_list; - int port, start, ret; + int port, ret; bind_list = kzalloc(sizeof *bind_list, GFP_KERNEL); if (!bind_list) return -ENOMEM; - start = snum ? snum : sysctl_local_port_range[0]; + do { + ret = idr_get_new_above(ps, bind_list, snum, &port); + } while ((ret == -EAGAIN) && idr_pre_get(ps, GFP_KERNEL)); + + if (ret) + goto err1; + + if (port != snum) { + ret = -EADDRNOTAVAIL; + goto err2; + } + + bind_list->ps = ps; + bind_list->port = (unsigned short) port; + cma_bind_port(bind_list, id_priv); + return 0; +err2: + idr_remove(ps, port); +err1: + kfree(bind_list); + return ret; +} +static int cma_alloc_any_port(struct idr *ps, struct rdma_id_private *id_priv) +{ + struct rdma_bind_list *bind_list; + int port, ret; + + bind_list = kzalloc(sizeof *bind_list, GFP_KERNEL); + if (!bind_list) + return -ENOMEM; + +retry: do { - ret = idr_get_new_above(ps, bind_list, start, &port); + ret = idr_get_new_above(ps, bind_list, next_port, &port); } while ((ret == -EAGAIN) && idr_pre_get(ps, GFP_KERNEL)); if (ret) - goto err; + goto err1; - if ((snum && port != snum) || - (!snum && port > sysctl_local_port_range[1])) { - idr_remove(ps, port); + if (port > sysctl_local_port_range[1]) { + if (next_port != sysctl_local_port_range[0]) { + idr_remove(ps, port); + next_port = sysctl_local_port_range[0]; + goto retry; + } ret = -EADDRNOTAVAIL; - goto err; + goto err2; } + if (port == sysctl_local_port_range[1]) + next_port = sysctl_local_port_range[0]; + else + next_port = port + 1; + bind_list->ps = ps; bind_list->port = (unsigned short) port; cma_bind_port(bind_list, id_priv); return 0; -err: +err2: + idr_remove(ps, port); +err1: kfree(bind_list); return ret; } @@ -1811,7 +1853,7 @@ static int cma_get_port(struct rdma_id_private *id_priv) mutex_lock(&lock); if (cma_any_port(&id_priv->id.route.addr.src_addr)) - ret = cma_alloc_port(ps, id_priv, 0); + ret = cma_alloc_any_port(ps, id_priv); else ret = cma_use_port(ps, id_priv); mutex_unlock(&lock); @@ -2448,6 +2490,10 @@ static int cma_init(void) { int ret; + get_random_bytes(&next_port, sizeof next_port); + next_port = (next_port % (sysctl_local_port_range[1] - + sysctl_local_port_range[0])) + + sysctl_local_port_range[0]; cma_wq = create_singlethread_workqueue("rdma_cm_wq"); if (!cma_wq) return -ENOMEM; -- cgit v1.2.2 From c7f743a669c27f9c392e78fda8829db9d6d50f43 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Thu, 1 Feb 2007 12:23:37 -0800 Subject: IB: Remove redundant "_wq" from workqueue names Signed-off-by: Roland Dreier --- drivers/infiniband/core/addr.c | 2 +- drivers/infiniband/core/cma.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index d2bb5a9a303f..a91001c59b69 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -373,7 +373,7 @@ static struct notifier_block nb = { static int addr_init(void) { - addr_wq = create_singlethread_workqueue("ib_addr_wq"); + addr_wq = create_singlethread_workqueue("ib_addr"); if (!addr_wq) return -ENOMEM; diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index bc31b54e9cac..db88e609bf42 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2494,7 +2494,7 @@ static int cma_init(void) next_port = (next_port % (sysctl_local_port_range[1] - sysctl_local_port_range[0])) + sysctl_local_port_range[0]; - cma_wq = create_singlethread_workqueue("rdma_cm_wq"); + cma_wq = create_singlethread_workqueue("rdma_cm"); if (!cma_wq) return -ENOMEM; -- cgit v1.2.2 From 82eb7c5059de64bd43f6b3cf3f128470f2b3fb83 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 8 Feb 2007 18:39:36 +0100 Subject: [WATCHDOG] timers cleanup - Use timer macros to set function and data members and to modify expiration time. - Use DEFINE_TIMER for single (platform dependent) watchdog timers and do not init them at run-time in these cases. - del_timer_sync is common in most cases -- we want to wait for timer function if it's still running. Signed-off-by: Jiri Slaby Cc: Steve Hill Cc: Heiko Ronsdorf Cc: Fernando Fuganti Cc: Gergely Madarasz Cc: Ken Hollis Cc: Paul Mundt Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/char/watchdog/alim7101_wdt.c | 13 +++---------- drivers/char/watchdog/cpu5wdt.c | 13 ++++--------- drivers/char/watchdog/machzwd.c | 16 +++++----------- drivers/char/watchdog/mixcomwd.c | 14 ++++++-------- drivers/char/watchdog/pcwd.c | 4 +--- drivers/char/watchdog/sbc60xxwdt.c | 12 +++--------- drivers/char/watchdog/sc520_wdt.c | 12 +++--------- drivers/char/watchdog/shwdt.c | 8 +++----- drivers/char/watchdog/w83877f_wdt.c | 12 +++--------- 9 files changed, 31 insertions(+), 73 deletions(-) diff --git a/drivers/char/watchdog/alim7101_wdt.c b/drivers/char/watchdog/alim7101_wdt.c index 1dacec5c9637..c195078688de 100644 --- a/drivers/char/watchdog/alim7101_wdt.c +++ b/drivers/char/watchdog/alim7101_wdt.c @@ -69,7 +69,7 @@ module_param(use_gpio, int, 0); MODULE_PARM_DESC(use_gpio, "Use the gpio watchdog. (required by old cobalt boards)"); static void wdt_timer_ping(unsigned long); -static struct timer_list timer; +static DEFINE_TIMER(timer, wdt_timer_ping, 0, 1); static unsigned long next_heartbeat; static unsigned long wdt_is_open; static char wdt_expect_close; @@ -108,8 +108,7 @@ static void wdt_timer_ping(unsigned long data) printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); } /* Re-set the timer interval */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); } /* @@ -147,9 +146,7 @@ static void wdt_startup(void) wdt_change(WDT_ENABLE); /* Start the timer */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); - + mod_timer(&timer, jiffies + WDT_INTERVAL); printk(KERN_INFO PFX "Watchdog timer is now enabled.\n"); } @@ -380,10 +377,6 @@ static int __init alim7101_wdt_init(void) timeout); } - init_timer(&timer); - timer.function = wdt_timer_ping; - timer.data = 1; - rc = misc_register(&wdt_miscdev); if (rc) { printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", diff --git a/drivers/char/watchdog/cpu5wdt.c b/drivers/char/watchdog/cpu5wdt.c index 00bdabb90f27..bcd7e36ca0aa 100644 --- a/drivers/char/watchdog/cpu5wdt.c +++ b/drivers/char/watchdog/cpu5wdt.c @@ -80,10 +80,8 @@ static void cpu5wdt_trigger(unsigned long unused) outb(1, port + CPU5WDT_TRIGGER_REG); /* requeue?? */ - if( cpu5wdt_device.queue && ticks ) { - cpu5wdt_device.timer.expires = jiffies + CPU5WDT_INTERVAL; - add_timer(&cpu5wdt_device.timer); - } + if (cpu5wdt_device.queue && ticks) + mod_timer(&cpu5wdt_device.timer, jiffies + CPU5WDT_INTERVAL); else { /* ticks doesn't matter anyway */ complete(&cpu5wdt_device.stop); @@ -109,8 +107,7 @@ static void cpu5wdt_start(void) outb(1, port + CPU5WDT_MODE_REG); outb(0, port + CPU5WDT_RESET_REG); outb(0, port + CPU5WDT_ENABLE_REG); - cpu5wdt_device.timer.expires = jiffies + CPU5WDT_INTERVAL; - add_timer(&cpu5wdt_device.timer); + mod_timer(&cpu5wdt_device.timer, jiffies + CPU5WDT_INTERVAL); } /* if process dies, counter is not decremented */ cpu5wdt_device.running++; @@ -245,9 +242,7 @@ static int __devinit cpu5wdt_init(void) clear_bit(0, &cpu5wdt_device.inuse); - init_timer(&cpu5wdt_device.timer); - cpu5wdt_device.timer.function = cpu5wdt_trigger; - cpu5wdt_device.timer.data = 0; + setup_timer(&cpu5wdt_device.timer, cpu5wdt_trigger, 0); cpu5wdt_device.default_ticks = ticks; diff --git a/drivers/char/watchdog/machzwd.c b/drivers/char/watchdog/machzwd.c index 391998d260c2..4a328ba0d262 100644 --- a/drivers/char/watchdog/machzwd.c +++ b/drivers/char/watchdog/machzwd.c @@ -118,12 +118,14 @@ static int action = 0; module_param(action, int, 0); MODULE_PARM_DESC(action, "after watchdog resets, generate: 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI"); +static void zf_ping(unsigned long data); + static int zf_action = GEN_RESET; static unsigned long zf_is_open; static char zf_expect_close; static spinlock_t zf_lock; static spinlock_t zf_port_lock; -static struct timer_list zf_timer; +static DEFINE_TIMER(zf_timer, zf_ping, 0, 0); static unsigned long next_heartbeat = 0; @@ -220,9 +222,7 @@ static void zf_timer_on(void) next_heartbeat = jiffies + ZF_USER_TIMEO; /* start the timer for internal ping */ - zf_timer.expires = jiffies + ZF_HW_TIMEO; - - add_timer(&zf_timer); + mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO); /* start watchdog timer */ ctrl_reg = zf_get_control(); @@ -260,8 +260,7 @@ static void zf_ping(unsigned long data) zf_set_control(ctrl_reg); spin_unlock_irqrestore(&zf_port_lock, flags); - zf_timer.expires = jiffies + ZF_HW_TIMEO; - add_timer(&zf_timer); + mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO); }else{ printk(KERN_CRIT PFX ": I will reset your machine\n"); } @@ -465,11 +464,6 @@ static int __init zf_init(void) zf_set_status(0); zf_set_control(0); - /* this is the timer that will do the hard work */ - init_timer(&zf_timer); - zf_timer.function = zf_ping; - zf_timer.data = 0; - return 0; no_reboot: diff --git a/drivers/char/watchdog/mixcomwd.c b/drivers/char/watchdog/mixcomwd.c index 7e3308a60afb..f35e2848aa3e 100644 --- a/drivers/char/watchdog/mixcomwd.c +++ b/drivers/char/watchdog/mixcomwd.c @@ -56,11 +56,13 @@ static int mixcomwd_ioports[] = { 0x180, 0x280, 0x380, 0x000 }; #define FLASHCOM_WATCHDOG_OFFSET 0x4 #define FLASHCOM_ID 0x18 +static void mixcomwd_timerfun(unsigned long d); + static unsigned long mixcomwd_opened; /* long req'd for setbit --RR */ static int watchdog_port; static int mixcomwd_timer_alive; -static DEFINE_TIMER(mixcomwd_timer, NULL, 0, 0); +static DEFINE_TIMER(mixcomwd_timer, mixcomwd_timerfun, 0, 0); static char expect_close; static int nowayout = WATCHDOG_NOWAYOUT; @@ -77,7 +79,7 @@ static void mixcomwd_timerfun(unsigned long d) { mixcomwd_ping(); - mod_timer(&mixcomwd_timer,jiffies+ 5*HZ); + mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); } /* @@ -114,12 +116,8 @@ static int mixcomwd_release(struct inode *inode, struct file *file) printk(KERN_ERR "mixcomwd: release called while internal timer alive"); return -EBUSY; } - init_timer(&mixcomwd_timer); - mixcomwd_timer.expires=jiffies + 5 * HZ; - mixcomwd_timer.function=mixcomwd_timerfun; - mixcomwd_timer.data=0; mixcomwd_timer_alive=1; - add_timer(&mixcomwd_timer); + mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); } else { printk(KERN_CRIT "mixcomwd: WDT device closed unexpectedly. WDT will not stop!\n"); } @@ -285,7 +283,7 @@ static void __exit mixcomwd_exit(void) if(mixcomwd_timer_alive) { printk(KERN_WARNING "mixcomwd: I quit now, hardware will" " probably reboot!\n"); - del_timer(&mixcomwd_timer); + del_timer_sync(&mixcomwd_timer); mixcomwd_timer_alive=0; } } diff --git a/drivers/char/watchdog/pcwd.c b/drivers/char/watchdog/pcwd.c index b056c3c18aa7..6e8b5705b5b7 100644 --- a/drivers/char/watchdog/pcwd.c +++ b/drivers/char/watchdog/pcwd.c @@ -843,9 +843,7 @@ static int __devinit pcwatchdog_init(int base_addr) /* clear the "card caused reboot" flag */ pcwd_clear_status(); - init_timer(&pcwd_private.timer); - pcwd_private.timer.function = pcwd_timer_ping; - pcwd_private.timer.data = 0; + setup_timer(&pcwd_private.timer, pcwd_timer_ping, 0); /* Disable the board */ pcwd_stop(); diff --git a/drivers/char/watchdog/sbc60xxwdt.c b/drivers/char/watchdog/sbc60xxwdt.c index f5fb8cc23d52..b6282039198c 100644 --- a/drivers/char/watchdog/sbc60xxwdt.c +++ b/drivers/char/watchdog/sbc60xxwdt.c @@ -103,7 +103,7 @@ module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void wdt_timer_ping(unsigned long); -static struct timer_list timer; +static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); static unsigned long next_heartbeat; static unsigned long wdt_is_open; static char wdt_expect_close; @@ -122,8 +122,7 @@ static void wdt_timer_ping(unsigned long data) /* Ping the WDT by reading from wdt_start */ inb_p(wdt_start); /* Re-set the timer interval */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); } else { printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); } @@ -138,8 +137,7 @@ static void wdt_startup(void) next_heartbeat = jiffies + (timeout * HZ); /* Start the timer */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); printk(KERN_INFO PFX "Watchdog timer is now enabled.\n"); } @@ -363,10 +361,6 @@ static int __init sbc60xxwdt_init(void) } } - init_timer(&timer); - timer.function = wdt_timer_ping; - timer.data = 0; - rc = misc_register(&wdt_miscdev); if (rc) { diff --git a/drivers/char/watchdog/sc520_wdt.c b/drivers/char/watchdog/sc520_wdt.c index ecc73051a3b0..2676a43895a7 100644 --- a/drivers/char/watchdog/sc520_wdt.c +++ b/drivers/char/watchdog/sc520_wdt.c @@ -121,7 +121,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _ static __u16 __iomem *wdtmrctl; static void wdt_timer_ping(unsigned long); -static struct timer_list timer; +static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); static unsigned long next_heartbeat; static unsigned long wdt_is_open; static char wdt_expect_close; @@ -145,8 +145,7 @@ static void wdt_timer_ping(unsigned long data) spin_unlock(&wdt_spinlock); /* Re-set the timer interval */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); } else { printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); } @@ -179,8 +178,7 @@ static int wdt_startup(void) next_heartbeat = jiffies + (timeout * HZ); /* Start the timer */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); /* Start the watchdog */ wdt_config(WDT_ENB | WDT_WRST_ENB | WDT_EXP_SEL_04); @@ -389,10 +387,6 @@ static int __init sc520_wdt_init(void) spin_lock_init(&wdt_spinlock); - init_timer(&timer); - timer.function = wdt_timer_ping; - timer.data = 0; - /* Check that the timeout value is within it's range ; if not reset to the default */ if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); diff --git a/drivers/char/watchdog/shwdt.c b/drivers/char/watchdog/shwdt.c index dc403629aeb3..cecbedd473a4 100644 --- a/drivers/char/watchdog/shwdt.c +++ b/drivers/char/watchdog/shwdt.c @@ -65,10 +65,12 @@ static int clock_division_ratio = WTCSR_CKS_4096; #define next_ping_period(cks) msecs_to_jiffies(cks - 4) +static void sh_wdt_ping(unsigned long data); + static unsigned long shwdt_is_open; static struct watchdog_info sh_wdt_info; static char shwdt_expect_close; -static struct timer_list timer; +static DEFINE_TIMER(timer, sh_wdt_ping, 0, 0); static unsigned long next_heartbeat; #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ @@ -433,10 +435,6 @@ static int __init sh_wdt_init(void) "be 1<=x<=3600, using %d\n", heartbeat); } - init_timer(&timer); - timer.function = sh_wdt_ping; - timer.data = 0; - rc = register_reboot_notifier(&sh_wdt_notifier); if (unlikely(rc)) { printk(KERN_ERR PFX "Can't register reboot notifier (err=%d)\n", diff --git a/drivers/char/watchdog/w83877f_wdt.c b/drivers/char/watchdog/w83877f_wdt.c index 7dcd80aa7373..3c88fe18f4f4 100644 --- a/drivers/char/watchdog/w83877f_wdt.c +++ b/drivers/char/watchdog/w83877f_wdt.c @@ -90,7 +90,7 @@ module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void wdt_timer_ping(unsigned long); -static struct timer_list timer; +static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); static unsigned long next_heartbeat; static unsigned long wdt_is_open; static char wdt_expect_close; @@ -114,8 +114,7 @@ static void wdt_timer_ping(unsigned long data) inb_p(WDT_PING); /* Re-set the timer interval */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); spin_unlock(&wdt_spinlock); @@ -155,8 +154,7 @@ static void wdt_startup(void) next_heartbeat = jiffies + (timeout * HZ); /* Start the timer */ - timer.expires = jiffies + WDT_INTERVAL; - add_timer(&timer); + mod_timer(&timer, jiffies + WDT_INTERVAL); wdt_change(WDT_ENABLE); @@ -377,10 +375,6 @@ static int __init w83877f_wdt_init(void) goto err_out_region1; } - init_timer(&timer); - timer.function = wdt_timer_ping; - timer.data = 0; - rc = misc_register(&wdt_miscdev); if (rc) { -- cgit v1.2.2 From b038ced7b3705bf0ac9b30e118af0f56ab48b847 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 12 Feb 2007 16:16:18 -0800 Subject: RDMA/cxgb3: Add driver for Chelsio T3 RNIC Add an RDMA/iWARP driver for the Chelsio T3 1GbE and 10GbE adapters. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/Kconfig | 1 + drivers/infiniband/Makefile | 1 + drivers/infiniband/hw/cxgb3/Kconfig | 27 + drivers/infiniband/hw/cxgb3/Makefile | 12 + drivers/infiniband/hw/cxgb3/cxio_dbg.c | 207 +++ drivers/infiniband/hw/cxgb3/cxio_hal.c | 1280 ++++++++++++++++ drivers/infiniband/hw/cxgb3/cxio_hal.h | 201 +++ drivers/infiniband/hw/cxgb3/cxio_resource.c | 331 +++++ drivers/infiniband/hw/cxgb3/cxio_resource.h | 70 + drivers/infiniband/hw/cxgb3/cxio_wr.h | 685 +++++++++ drivers/infiniband/hw/cxgb3/iwch.c | 189 +++ drivers/infiniband/hw/cxgb3/iwch.h | 177 +++ drivers/infiniband/hw/cxgb3/iwch_cm.c | 2081 +++++++++++++++++++++++++++ drivers/infiniband/hw/cxgb3/iwch_cm.h | 223 +++ drivers/infiniband/hw/cxgb3/iwch_cq.c | 225 +++ drivers/infiniband/hw/cxgb3/iwch_ev.c | 231 +++ drivers/infiniband/hw/cxgb3/iwch_mem.c | 172 +++ drivers/infiniband/hw/cxgb3/iwch_provider.c | 1203 ++++++++++++++++ drivers/infiniband/hw/cxgb3/iwch_provider.h | 367 +++++ drivers/infiniband/hw/cxgb3/iwch_qp.c | 1007 +++++++++++++ drivers/infiniband/hw/cxgb3/iwch_user.h | 67 + drivers/infiniband/hw/cxgb3/tcb.h | 632 ++++++++ 22 files changed, 9389 insertions(+) create mode 100644 drivers/infiniband/hw/cxgb3/Kconfig create mode 100644 drivers/infiniband/hw/cxgb3/Makefile create mode 100644 drivers/infiniband/hw/cxgb3/cxio_dbg.c create mode 100644 drivers/infiniband/hw/cxgb3/cxio_hal.c create mode 100644 drivers/infiniband/hw/cxgb3/cxio_hal.h create mode 100644 drivers/infiniband/hw/cxgb3/cxio_resource.c create mode 100644 drivers/infiniband/hw/cxgb3/cxio_resource.h create mode 100644 drivers/infiniband/hw/cxgb3/cxio_wr.h create mode 100644 drivers/infiniband/hw/cxgb3/iwch.c create mode 100644 drivers/infiniband/hw/cxgb3/iwch.h create mode 100644 drivers/infiniband/hw/cxgb3/iwch_cm.c create mode 100644 drivers/infiniband/hw/cxgb3/iwch_cm.h create mode 100644 drivers/infiniband/hw/cxgb3/iwch_cq.c create mode 100644 drivers/infiniband/hw/cxgb3/iwch_ev.c create mode 100644 drivers/infiniband/hw/cxgb3/iwch_mem.c create mode 100644 drivers/infiniband/hw/cxgb3/iwch_provider.c create mode 100644 drivers/infiniband/hw/cxgb3/iwch_provider.h create mode 100644 drivers/infiniband/hw/cxgb3/iwch_qp.c create mode 100644 drivers/infiniband/hw/cxgb3/iwch_user.h create mode 100644 drivers/infiniband/hw/cxgb3/tcb.h diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig index 9edfacee7d84..66b36de9fa6f 100644 --- a/drivers/infiniband/Kconfig +++ b/drivers/infiniband/Kconfig @@ -38,6 +38,7 @@ source "drivers/infiniband/hw/mthca/Kconfig" source "drivers/infiniband/hw/ipath/Kconfig" source "drivers/infiniband/hw/ehca/Kconfig" source "drivers/infiniband/hw/amso1100/Kconfig" +source "drivers/infiniband/hw/cxgb3/Kconfig" source "drivers/infiniband/ulp/ipoib/Kconfig" diff --git a/drivers/infiniband/Makefile b/drivers/infiniband/Makefile index 2b5d1098ef45..da2066c4f22c 100644 --- a/drivers/infiniband/Makefile +++ b/drivers/infiniband/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_INFINIBAND_MTHCA) += hw/mthca/ obj-$(CONFIG_INFINIBAND_IPATH) += hw/ipath/ obj-$(CONFIG_INFINIBAND_EHCA) += hw/ehca/ obj-$(CONFIG_INFINIBAND_AMSO1100) += hw/amso1100/ +obj-$(CONFIG_INFINIBAND_CXGB3) += hw/cxgb3/ obj-$(CONFIG_INFINIBAND_IPOIB) += ulp/ipoib/ obj-$(CONFIG_INFINIBAND_SRP) += ulp/srp/ obj-$(CONFIG_INFINIBAND_ISER) += ulp/iser/ diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig new file mode 100644 index 000000000000..77977f55dca3 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/Kconfig @@ -0,0 +1,27 @@ +config INFINIBAND_CXGB3 + tristate "Chelsio RDMA Driver" + depends on CHELSIO_T3 && INFINIBAND && INET + select GENERIC_ALLOCATOR + ---help--- + This is an iWARP/RDMA driver for the Chelsio T3 1GbE and + 10GbE adapters. + + For general information about Chelsio and our products, visit + our website at . + + For customer support, please visit our customer support page at + . + + Please send feedback to . + + To compile this driver as a module, choose M here: the module + will be called iw_cxgb3. + +config INFINIBAND_CXGB3_DEBUG + bool "Verbose debugging output" + depends on INFINIBAND_CXGB3 + default n + ---help--- + This option causes the Chelsio RDMA driver to produce copious + amounts of debug messages. Select this if you are developing + the driver or trying to diagnose a problem. diff --git a/drivers/infiniband/hw/cxgb3/Makefile b/drivers/infiniband/hw/cxgb3/Makefile new file mode 100644 index 000000000000..0e110f32f128 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/Makefile @@ -0,0 +1,12 @@ +EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/cxgb3 \ + -I$(TOPDIR)/drivers/infiniband/hw/cxgb3/core + +obj-$(CONFIG_INFINIBAND_CXGB3) += iw_cxgb3.o + +iw_cxgb3-y := iwch_cm.o iwch_ev.o iwch_cq.o iwch_qp.o iwch_mem.o \ + iwch_provider.o iwch.o cxio_hal.o cxio_resource.o + +ifdef CONFIG_INFINIBAND_CXGB3_DEBUG +EXTRA_CFLAGS += -DDEBUG +iw_cxgb3-y += cxio_dbg.o +endif diff --git a/drivers/infiniband/hw/cxgb3/cxio_dbg.c b/drivers/infiniband/hw/cxgb3/cxio_dbg.c new file mode 100644 index 000000000000..5a7306f5efae --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_dbg.c @@ -0,0 +1,207 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifdef DEBUG +#include +#include "common.h" +#include "cxgb3_ioctl.h" +#include "cxio_hal.h" +#include "cxio_wr.h" + +void cxio_dump_tpt(struct cxio_rdev *rdev, u32 stag) +{ + struct ch_mem_range *m; + u64 *data; + int rc; + int size = 32; + + m = kmalloc(sizeof(*m) + size, GFP_ATOMIC); + if (!m) { + PDBG("%s couldn't allocate memory.\n", __FUNCTION__); + return; + } + m->mem_id = MEM_PMRX; + m->addr = (stag>>8) * 32 + rdev->rnic_info.tpt_base; + m->len = size; + PDBG("%s TPT addr 0x%x len %d\n", __FUNCTION__, m->addr, m->len); + rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m); + if (rc) { + PDBG("%s toectl returned error %d\n", __FUNCTION__, rc); + kfree(m); + return; + } + + data = (u64 *)m->buf; + while (size > 0) { + PDBG("TPT %08x: %016llx\n", m->addr, (unsigned long long) *data); + size -= 8; + data++; + m->addr += 8; + } + kfree(m); +} + +void cxio_dump_pbl(struct cxio_rdev *rdev, u32 pbl_addr, uint len, u8 shift) +{ + struct ch_mem_range *m; + u64 *data; + int rc; + int size, npages; + + shift += 12; + npages = (len + (1ULL << shift) - 1) >> shift; + size = npages * sizeof(u64); + + m = kmalloc(sizeof(*m) + size, GFP_ATOMIC); + if (!m) { + PDBG("%s couldn't allocate memory.\n", __FUNCTION__); + return; + } + m->mem_id = MEM_PMRX; + m->addr = pbl_addr; + m->len = size; + PDBG("%s PBL addr 0x%x len %d depth %d\n", + __FUNCTION__, m->addr, m->len, npages); + rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m); + if (rc) { + PDBG("%s toectl returned error %d\n", __FUNCTION__, rc); + kfree(m); + return; + } + + data = (u64 *)m->buf; + while (size > 0) { + PDBG("PBL %08x: %016llx\n", m->addr, (unsigned long long) *data); + size -= 8; + data++; + m->addr += 8; + } + kfree(m); +} + +void cxio_dump_wqe(union t3_wr *wqe) +{ + __be64 *data = (__be64 *)wqe; + uint size = (uint)(be64_to_cpu(*data) & 0xff); + + if (size == 0) + size = 8; + while (size > 0) { + PDBG("WQE %p: %016llx\n", data, + (unsigned long long) be64_to_cpu(*data)); + size--; + data++; + } +} + +void cxio_dump_wce(struct t3_cqe *wce) +{ + __be64 *data = (__be64 *)wce; + int size = sizeof(*wce); + + while (size > 0) { + PDBG("WCE %p: %016llx\n", data, + (unsigned long long) be64_to_cpu(*data)); + size -= 8; + data++; + } +} + +void cxio_dump_rqt(struct cxio_rdev *rdev, u32 hwtid, int nents) +{ + struct ch_mem_range *m; + int size = nents * 64; + u64 *data; + int rc; + + m = kmalloc(sizeof(*m) + size, GFP_ATOMIC); + if (!m) { + PDBG("%s couldn't allocate memory.\n", __FUNCTION__); + return; + } + m->mem_id = MEM_PMRX; + m->addr = ((hwtid)<<10) + rdev->rnic_info.rqt_base; + m->len = size; + PDBG("%s RQT addr 0x%x len %d\n", __FUNCTION__, m->addr, m->len); + rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m); + if (rc) { + PDBG("%s toectl returned error %d\n", __FUNCTION__, rc); + kfree(m); + return; + } + + data = (u64 *)m->buf; + while (size > 0) { + PDBG("RQT %08x: %016llx\n", m->addr, (unsigned long long) *data); + size -= 8; + data++; + m->addr += 8; + } + kfree(m); +} + +void cxio_dump_tcb(struct cxio_rdev *rdev, u32 hwtid) +{ + struct ch_mem_range *m; + int size = TCB_SIZE; + u32 *data; + int rc; + + m = kmalloc(sizeof(*m) + size, GFP_ATOMIC); + if (!m) { + PDBG("%s couldn't allocate memory.\n", __FUNCTION__); + return; + } + m->mem_id = MEM_CM; + m->addr = hwtid * size; + m->len = size; + PDBG("%s TCB %d len %d\n", __FUNCTION__, m->addr, m->len); + rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m); + if (rc) { + PDBG("%s toectl returned error %d\n", __FUNCTION__, rc); + kfree(m); + return; + } + + data = (u32 *)m->buf; + while (size > 0) { + printk("%2u: %08x %08x %08x %08x %08x %08x %08x %08x\n", + m->addr, + *(data+2), *(data+3), *(data),*(data+1), + *(data+6), *(data+7), *(data+4), *(data+5)); + size -= 32; + data += 8; + m->addr += 32; + } + kfree(m); +} +#endif diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c new file mode 100644 index 000000000000..82fa72041989 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -0,0 +1,1280 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include + +#include +#include +#include +#include +#include + +#include "cxio_resource.h" +#include "cxio_hal.h" +#include "cxgb3_offload.h" +#include "sge_defs.h" + +static LIST_HEAD(rdev_list); +static cxio_hal_ev_callback_func_t cxio_ev_cb = NULL; + +static inline struct cxio_rdev *cxio_hal_find_rdev_by_name(char *dev_name) +{ + struct cxio_rdev *rdev; + + list_for_each_entry(rdev, &rdev_list, entry) + if (!strcmp(rdev->dev_name, dev_name)) + return rdev; + return NULL; +} + +static inline struct cxio_rdev *cxio_hal_find_rdev_by_t3cdev(struct t3cdev + *tdev) +{ + struct cxio_rdev *rdev; + + list_for_each_entry(rdev, &rdev_list, entry) + if (rdev->t3cdev_p == tdev) + return rdev; + return NULL; +} + +int cxio_hal_cq_op(struct cxio_rdev *rdev_p, struct t3_cq *cq, + enum t3_cq_opcode op, u32 credit) +{ + int ret; + struct t3_cqe *cqe; + u32 rptr; + + struct rdma_cq_op setup; + setup.id = cq->cqid; + setup.credits = (op == CQ_CREDIT_UPDATE) ? credit : 0; + setup.op = op; + ret = rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_CQ_OP, &setup); + + if ((ret < 0) || (op == CQ_CREDIT_UPDATE)) + return ret; + + /* + * If the rearm returned an index other than our current index, + * then there might be CQE's in flight (being DMA'd). We must wait + * here for them to complete or the consumer can miss a notification. + */ + if (Q_PTR2IDX((cq->rptr), cq->size_log2) != ret) { + int i=0; + + rptr = cq->rptr; + + /* + * Keep the generation correct by bumping rptr until it + * matches the index returned by the rearm - 1. + */ + while (Q_PTR2IDX((rptr+1), cq->size_log2) != ret) + rptr++; + + /* + * Now rptr is the index for the (last) cqe that was + * in-flight at the time the HW rearmed the CQ. We + * spin until that CQE is valid. + */ + cqe = cq->queue + Q_PTR2IDX(rptr, cq->size_log2); + while (!CQ_VLD_ENTRY(rptr, cq->size_log2, cqe)) { + udelay(1); + if (i++ > 1000000) { + BUG_ON(1); + printk(KERN_ERR "%s: stalled rnic\n", + rdev_p->dev_name); + return -EIO; + } + } + } + return 0; +} + +static inline int cxio_hal_clear_cq_ctx(struct cxio_rdev *rdev_p, u32 cqid) +{ + struct rdma_cq_setup setup; + setup.id = cqid; + setup.base_addr = 0; /* NULL address */ + setup.size = 0; /* disaable the CQ */ + setup.credits = 0; + setup.credit_thres = 0; + setup.ovfl_mode = 0; + return (rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_CQ_SETUP, &setup)); +} + +int cxio_hal_clear_qp_ctx(struct cxio_rdev *rdev_p, u32 qpid) +{ + u64 sge_cmd; + struct t3_modify_qp_wr *wqe; + struct sk_buff *skb = alloc_skb(sizeof(*wqe), GFP_KERNEL); + if (!skb) { + PDBG("%s alloc_skb failed\n", __FUNCTION__); + return -ENOMEM; + } + wqe = (struct t3_modify_qp_wr *) skb_put(skb, sizeof(*wqe)); + memset(wqe, 0, sizeof(*wqe)); + build_fw_riwrh((struct fw_riwrh *) wqe, T3_WR_QP_MOD, 3, 1, qpid, 7); + wqe->flags = cpu_to_be32(MODQP_WRITE_EC); + sge_cmd = qpid << 8 | 3; + wqe->sge_cmd = cpu_to_be64(sge_cmd); + skb->priority = CPL_PRIORITY_CONTROL; + return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb)); +} + +int cxio_create_cq(struct cxio_rdev *rdev_p, struct t3_cq *cq) +{ + struct rdma_cq_setup setup; + int size = (1UL << (cq->size_log2)) * sizeof(struct t3_cqe); + + cq->cqid = cxio_hal_get_cqid(rdev_p->rscp); + if (!cq->cqid) + return -ENOMEM; + cq->sw_queue = kzalloc(size, GFP_KERNEL); + if (!cq->sw_queue) + return -ENOMEM; + cq->queue = dma_alloc_coherent(&(rdev_p->rnic_info.pdev->dev), + (1UL << (cq->size_log2)) * + sizeof(struct t3_cqe), + &(cq->dma_addr), GFP_KERNEL); + if (!cq->queue) { + kfree(cq->sw_queue); + return -ENOMEM; + } + pci_unmap_addr_set(cq, mapping, cq->dma_addr); + memset(cq->queue, 0, size); + setup.id = cq->cqid; + setup.base_addr = (u64) (cq->dma_addr); + setup.size = 1UL << cq->size_log2; + setup.credits = 65535; + setup.credit_thres = 1; + if (rdev_p->t3cdev_p->type == T3B) + setup.ovfl_mode = 0; + else + setup.ovfl_mode = 1; + return (rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_CQ_SETUP, &setup)); +} + +int cxio_resize_cq(struct cxio_rdev *rdev_p, struct t3_cq *cq) +{ + struct rdma_cq_setup setup; + setup.id = cq->cqid; + setup.base_addr = (u64) (cq->dma_addr); + setup.size = 1UL << cq->size_log2; + setup.credits = setup.size; + setup.credit_thres = setup.size; /* TBD: overflow recovery */ + setup.ovfl_mode = 1; + return (rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_CQ_SETUP, &setup)); +} + +static u32 get_qpid(struct cxio_rdev *rdev_p, struct cxio_ucontext *uctx) +{ + struct cxio_qpid_list *entry; + u32 qpid; + int i; + + mutex_lock(&uctx->lock); + if (!list_empty(&uctx->qpids)) { + entry = list_entry(uctx->qpids.next, struct cxio_qpid_list, + entry); + list_del(&entry->entry); + qpid = entry->qpid; + kfree(entry); + } else { + qpid = cxio_hal_get_qpid(rdev_p->rscp); + if (!qpid) + goto out; + for (i = qpid+1; i & rdev_p->qpmask; i++) { + entry = kmalloc(sizeof *entry, GFP_KERNEL); + if (!entry) + break; + entry->qpid = i; + list_add_tail(&entry->entry, &uctx->qpids); + } + } +out: + mutex_unlock(&uctx->lock); + PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid); + return qpid; +} + +static void put_qpid(struct cxio_rdev *rdev_p, u32 qpid, + struct cxio_ucontext *uctx) +{ + struct cxio_qpid_list *entry; + + entry = kmalloc(sizeof *entry, GFP_KERNEL); + if (!entry) + return; + PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid); + entry->qpid = qpid; + mutex_lock(&uctx->lock); + list_add_tail(&entry->entry, &uctx->qpids); + mutex_unlock(&uctx->lock); +} + +void cxio_release_ucontext(struct cxio_rdev *rdev_p, struct cxio_ucontext *uctx) +{ + struct list_head *pos, *nxt; + struct cxio_qpid_list *entry; + + mutex_lock(&uctx->lock); + list_for_each_safe(pos, nxt, &uctx->qpids) { + entry = list_entry(pos, struct cxio_qpid_list, entry); + list_del_init(&entry->entry); + if (!(entry->qpid & rdev_p->qpmask)) + cxio_hal_put_qpid(rdev_p->rscp, entry->qpid); + kfree(entry); + } + mutex_unlock(&uctx->lock); +} + +void cxio_init_ucontext(struct cxio_rdev *rdev_p, struct cxio_ucontext *uctx) +{ + INIT_LIST_HEAD(&uctx->qpids); + mutex_init(&uctx->lock); +} + +int cxio_create_qp(struct cxio_rdev *rdev_p, u32 kernel_domain, + struct t3_wq *wq, struct cxio_ucontext *uctx) +{ + int depth = 1UL << wq->size_log2; + int rqsize = 1UL << wq->rq_size_log2; + + wq->qpid = get_qpid(rdev_p, uctx); + if (!wq->qpid) + return -ENOMEM; + + wq->rq = kzalloc(depth * sizeof(u64), GFP_KERNEL); + if (!wq->rq) + goto err1; + + wq->rq_addr = cxio_hal_rqtpool_alloc(rdev_p, rqsize); + if (!wq->rq_addr) + goto err2; + + wq->sq = kzalloc(depth * sizeof(struct t3_swsq), GFP_KERNEL); + if (!wq->sq) + goto err3; + + wq->queue = dma_alloc_coherent(&(rdev_p->rnic_info.pdev->dev), + depth * sizeof(union t3_wr), + &(wq->dma_addr), GFP_KERNEL); + if (!wq->queue) + goto err4; + + memset(wq->queue, 0, depth * sizeof(union t3_wr)); + pci_unmap_addr_set(wq, mapping, wq->dma_addr); + wq->doorbell = (void __iomem *)rdev_p->rnic_info.kdb_addr; + if (!kernel_domain) + wq->udb = (u64)rdev_p->rnic_info.udbell_physbase + + (wq->qpid << rdev_p->qpshift); + PDBG("%s qpid 0x%x doorbell 0x%p udb 0x%llx\n", __FUNCTION__, + wq->qpid, wq->doorbell, (unsigned long long) wq->udb); + return 0; +err4: + kfree(wq->sq); +err3: + cxio_hal_rqtpool_free(rdev_p, wq->rq_addr, rqsize); +err2: + kfree(wq->rq); +err1: + put_qpid(rdev_p, wq->qpid, uctx); + return -ENOMEM; +} + +int cxio_destroy_cq(struct cxio_rdev *rdev_p, struct t3_cq *cq) +{ + int err; + err = cxio_hal_clear_cq_ctx(rdev_p, cq->cqid); + kfree(cq->sw_queue); + dma_free_coherent(&(rdev_p->rnic_info.pdev->dev), + (1UL << (cq->size_log2)) + * sizeof(struct t3_cqe), cq->queue, + pci_unmap_addr(cq, mapping)); + cxio_hal_put_cqid(rdev_p->rscp, cq->cqid); + return err; +} + +int cxio_destroy_qp(struct cxio_rdev *rdev_p, struct t3_wq *wq, + struct cxio_ucontext *uctx) +{ + dma_free_coherent(&(rdev_p->rnic_info.pdev->dev), + (1UL << (wq->size_log2)) + * sizeof(union t3_wr), wq->queue, + pci_unmap_addr(wq, mapping)); + kfree(wq->sq); + cxio_hal_rqtpool_free(rdev_p, wq->rq_addr, (1UL << wq->rq_size_log2)); + kfree(wq->rq); + put_qpid(rdev_p, wq->qpid, uctx); + return 0; +} + +static void insert_recv_cqe(struct t3_wq *wq, struct t3_cq *cq) +{ + struct t3_cqe cqe; + + PDBG("%s wq %p cq %p sw_rptr 0x%x sw_wptr 0x%x\n", __FUNCTION__, + wq, cq, cq->sw_rptr, cq->sw_wptr); + memset(&cqe, 0, sizeof(cqe)); + cqe.header = cpu_to_be32(V_CQE_STATUS(TPT_ERR_SWFLUSH) | + V_CQE_OPCODE(T3_SEND) | + V_CQE_TYPE(0) | + V_CQE_SWCQE(1) | + V_CQE_QPID(wq->qpid) | + V_CQE_GENBIT(Q_GENBIT(cq->sw_wptr, + cq->size_log2))); + *(cq->sw_queue + Q_PTR2IDX(cq->sw_wptr, cq->size_log2)) = cqe; + cq->sw_wptr++; +} + +void cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count) +{ + u32 ptr; + + PDBG("%s wq %p cq %p\n", __FUNCTION__, wq, cq); + + /* flush RQ */ + PDBG("%s rq_rptr %u rq_wptr %u skip count %u\n", __FUNCTION__, + wq->rq_rptr, wq->rq_wptr, count); + ptr = wq->rq_rptr + count; + while (ptr++ != wq->rq_wptr) + insert_recv_cqe(wq, cq); +} + +static void insert_sq_cqe(struct t3_wq *wq, struct t3_cq *cq, + struct t3_swsq *sqp) +{ + struct t3_cqe cqe; + + PDBG("%s wq %p cq %p sw_rptr 0x%x sw_wptr 0x%x\n", __FUNCTION__, + wq, cq, cq->sw_rptr, cq->sw_wptr); + memset(&cqe, 0, sizeof(cqe)); + cqe.header = cpu_to_be32(V_CQE_STATUS(TPT_ERR_SWFLUSH) | + V_CQE_OPCODE(sqp->opcode) | + V_CQE_TYPE(1) | + V_CQE_SWCQE(1) | + V_CQE_QPID(wq->qpid) | + V_CQE_GENBIT(Q_GENBIT(cq->sw_wptr, + cq->size_log2))); + cqe.u.scqe.wrid_hi = sqp->sq_wptr; + + *(cq->sw_queue + Q_PTR2IDX(cq->sw_wptr, cq->size_log2)) = cqe; + cq->sw_wptr++; +} + +void cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count) +{ + __u32 ptr; + struct t3_swsq *sqp = wq->sq + Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2); + + ptr = wq->sq_rptr + count; + sqp += count; + while (ptr != wq->sq_wptr) { + insert_sq_cqe(wq, cq, sqp); + sqp++; + ptr++; + } +} + +/* + * Move all CQEs from the HWCQ into the SWCQ. + */ +void cxio_flush_hw_cq(struct t3_cq *cq) +{ + struct t3_cqe *cqe, *swcqe; + + PDBG("%s cq %p cqid 0x%x\n", __FUNCTION__, cq, cq->cqid); + cqe = cxio_next_hw_cqe(cq); + while (cqe) { + PDBG("%s flushing hwcq rptr 0x%x to swcq wptr 0x%x\n", + __FUNCTION__, cq->rptr, cq->sw_wptr); + swcqe = cq->sw_queue + Q_PTR2IDX(cq->sw_wptr, cq->size_log2); + *swcqe = *cqe; + swcqe->header |= cpu_to_be32(V_CQE_SWCQE(1)); + cq->sw_wptr++; + cq->rptr++; + cqe = cxio_next_hw_cqe(cq); + } +} + +static inline int cqe_completes_wr(struct t3_cqe *cqe, struct t3_wq *wq) +{ + if (CQE_OPCODE(*cqe) == T3_TERMINATE) + return 0; + + if ((CQE_OPCODE(*cqe) == T3_RDMA_WRITE) && RQ_TYPE(*cqe)) + return 0; + + if ((CQE_OPCODE(*cqe) == T3_READ_RESP) && SQ_TYPE(*cqe)) + return 0; + + if ((CQE_OPCODE(*cqe) == T3_SEND) && RQ_TYPE(*cqe) && + Q_EMPTY(wq->rq_rptr, wq->rq_wptr)) + return 0; + + return 1; +} + +void cxio_count_scqes(struct t3_cq *cq, struct t3_wq *wq, int *count) +{ + struct t3_cqe *cqe; + u32 ptr; + + *count = 0; + ptr = cq->sw_rptr; + while (!Q_EMPTY(ptr, cq->sw_wptr)) { + cqe = cq->sw_queue + (Q_PTR2IDX(ptr, cq->size_log2)); + if ((SQ_TYPE(*cqe) || (CQE_OPCODE(*cqe) == T3_READ_RESP)) && + (CQE_QPID(*cqe) == wq->qpid)) + (*count)++; + ptr++; + } + PDBG("%s cq %p count %d\n", __FUNCTION__, cq, *count); +} + +void cxio_count_rcqes(struct t3_cq *cq, struct t3_wq *wq, int *count) +{ + struct t3_cqe *cqe; + u32 ptr; + + *count = 0; + PDBG("%s count zero %d\n", __FUNCTION__, *count); + ptr = cq->sw_rptr; + while (!Q_EMPTY(ptr, cq->sw_wptr)) { + cqe = cq->sw_queue + (Q_PTR2IDX(ptr, cq->size_log2)); + if (RQ_TYPE(*cqe) && (CQE_OPCODE(*cqe) != T3_READ_RESP) && + (CQE_QPID(*cqe) == wq->qpid) && cqe_completes_wr(cqe, wq)) + (*count)++; + ptr++; + } + PDBG("%s cq %p count %d\n", __FUNCTION__, cq, *count); +} + +static int cxio_hal_init_ctrl_cq(struct cxio_rdev *rdev_p) +{ + struct rdma_cq_setup setup; + setup.id = 0; + setup.base_addr = 0; /* NULL address */ + setup.size = 1; /* enable the CQ */ + setup.credits = 0; + + /* force SGE to redirect to RspQ and interrupt */ + setup.credit_thres = 0; + setup.ovfl_mode = 1; + return (rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_CQ_SETUP, &setup)); +} + +static int cxio_hal_init_ctrl_qp(struct cxio_rdev *rdev_p) +{ + int err; + u64 sge_cmd, ctx0, ctx1; + u64 base_addr; + struct t3_modify_qp_wr *wqe; + struct sk_buff *skb = alloc_skb(sizeof(*wqe), GFP_KERNEL); + + + if (!skb) { + PDBG("%s alloc_skb failed\n", __FUNCTION__); + return -ENOMEM; + } + err = cxio_hal_init_ctrl_cq(rdev_p); + if (err) { + PDBG("%s err %d initializing ctrl_cq\n", __FUNCTION__, err); + return err; + } + rdev_p->ctrl_qp.workq = dma_alloc_coherent( + &(rdev_p->rnic_info.pdev->dev), + (1 << T3_CTRL_QP_SIZE_LOG2) * + sizeof(union t3_wr), + &(rdev_p->ctrl_qp.dma_addr), + GFP_KERNEL); + if (!rdev_p->ctrl_qp.workq) { + PDBG("%s dma_alloc_coherent failed\n", __FUNCTION__); + return -ENOMEM; + } + pci_unmap_addr_set(&rdev_p->ctrl_qp, mapping, + rdev_p->ctrl_qp.dma_addr); + rdev_p->ctrl_qp.doorbell = (void __iomem *)rdev_p->rnic_info.kdb_addr; + memset(rdev_p->ctrl_qp.workq, 0, + (1 << T3_CTRL_QP_SIZE_LOG2) * sizeof(union t3_wr)); + + mutex_init(&rdev_p->ctrl_qp.lock); + init_waitqueue_head(&rdev_p->ctrl_qp.waitq); + + /* update HW Ctrl QP context */ + base_addr = rdev_p->ctrl_qp.dma_addr; + base_addr >>= 12; + ctx0 = (V_EC_SIZE((1 << T3_CTRL_QP_SIZE_LOG2)) | + V_EC_BASE_LO((u32) base_addr & 0xffff)); + ctx0 <<= 32; + ctx0 |= V_EC_CREDITS(FW_WR_NUM); + base_addr >>= 16; + ctx1 = (u32) base_addr; + base_addr >>= 32; + ctx1 |= ((u64) (V_EC_BASE_HI((u32) base_addr & 0xf) | V_EC_RESPQ(0) | + V_EC_TYPE(0) | V_EC_GEN(1) | + V_EC_UP_TOKEN(T3_CTL_QP_TID) | F_EC_VALID)) << 32; + wqe = (struct t3_modify_qp_wr *) skb_put(skb, sizeof(*wqe)); + memset(wqe, 0, sizeof(*wqe)); + build_fw_riwrh((struct fw_riwrh *) wqe, T3_WR_QP_MOD, 0, 1, + T3_CTL_QP_TID, 7); + wqe->flags = cpu_to_be32(MODQP_WRITE_EC); + sge_cmd = (3ULL << 56) | FW_RI_SGEEC_START << 8 | 3; + wqe->sge_cmd = cpu_to_be64(sge_cmd); + wqe->ctx1 = cpu_to_be64(ctx1); + wqe->ctx0 = cpu_to_be64(ctx0); + PDBG("CtrlQP dma_addr 0x%llx workq %p size %d\n", + (unsigned long long) rdev_p->ctrl_qp.dma_addr, + rdev_p->ctrl_qp.workq, 1 << T3_CTRL_QP_SIZE_LOG2); + skb->priority = CPL_PRIORITY_CONTROL; + return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb)); +} + +static int cxio_hal_destroy_ctrl_qp(struct cxio_rdev *rdev_p) +{ + dma_free_coherent(&(rdev_p->rnic_info.pdev->dev), + (1UL << T3_CTRL_QP_SIZE_LOG2) + * sizeof(union t3_wr), rdev_p->ctrl_qp.workq, + pci_unmap_addr(&rdev_p->ctrl_qp, mapping)); + return cxio_hal_clear_qp_ctx(rdev_p, T3_CTRL_QP_ID); +} + +/* write len bytes of data into addr (32B aligned address) + * If data is NULL, clear len byte of memory to zero. + * caller aquires the ctrl_qp lock before the call + */ +static int cxio_hal_ctrl_qp_write_mem(struct cxio_rdev *rdev_p, u32 addr, + u32 len, void *data, int completion) +{ + u32 i, nr_wqe, copy_len; + u8 *copy_data; + u8 wr_len, utx_len; /* lenght in 8 byte flit */ + enum t3_wr_flags flag; + __be64 *wqe; + u64 utx_cmd; + addr &= 0x7FFFFFF; + nr_wqe = len % 96 ? len / 96 + 1 : len / 96; /* 96B max per WQE */ + PDBG("%s wptr 0x%x rptr 0x%x len %d, nr_wqe %d data %p addr 0x%0x\n", + __FUNCTION__, rdev_p->ctrl_qp.wptr, rdev_p->ctrl_qp.rptr, len, + nr_wqe, data, addr); + utx_len = 3; /* in 32B unit */ + for (i = 0; i < nr_wqe; i++) { + if (Q_FULL(rdev_p->ctrl_qp.rptr, rdev_p->ctrl_qp.wptr, + T3_CTRL_QP_SIZE_LOG2)) { + PDBG("%s ctrl_qp full wtpr 0x%0x rptr 0x%0x, " + "wait for more space i %d\n", __FUNCTION__, + rdev_p->ctrl_qp.wptr, rdev_p->ctrl_qp.rptr, i); + if (wait_event_interruptible(rdev_p->ctrl_qp.waitq, + !Q_FULL(rdev_p->ctrl_qp.rptr, + rdev_p->ctrl_qp.wptr, + T3_CTRL_QP_SIZE_LOG2))) { + PDBG("%s ctrl_qp workq interrupted\n", + __FUNCTION__); + return -ERESTARTSYS; + } + PDBG("%s ctrl_qp wakeup, continue posting work request " + "i %d\n", __FUNCTION__, i); + } + wqe = (__be64 *)(rdev_p->ctrl_qp.workq + (rdev_p->ctrl_qp.wptr % + (1 << T3_CTRL_QP_SIZE_LOG2))); + flag = 0; + if (i == (nr_wqe - 1)) { + /* last WQE */ + flag = completion ? T3_COMPLETION_FLAG : 0; + if (len % 32) + utx_len = len / 32 + 1; + else + utx_len = len / 32; + } + + /* + * Force a CQE to return the credit to the workq in case + * we posted more than half the max QP size of WRs + */ + if ((i != 0) && + (i % (((1 << T3_CTRL_QP_SIZE_LOG2)) >> 1) == 0)) { + flag = T3_COMPLETION_FLAG; + PDBG("%s force completion at i %d\n", __FUNCTION__, i); + } + + /* build the utx mem command */ + wqe += (sizeof(struct t3_bypass_wr) >> 3); + utx_cmd = (T3_UTX_MEM_WRITE << 28) | (addr + i * 3); + utx_cmd <<= 32; + utx_cmd |= (utx_len << 28) | ((utx_len << 2) + 1); + *wqe = cpu_to_be64(utx_cmd); + wqe++; + copy_data = (u8 *) data + i * 96; + copy_len = len > 96 ? 96 : len; + + /* clear memory content if data is NULL */ + if (data) + memcpy(wqe, copy_data, copy_len); + else + memset(wqe, 0, copy_len); + if (copy_len % 32) + memset(((u8 *) wqe) + copy_len, 0, + 32 - (copy_len % 32)); + wr_len = ((sizeof(struct t3_bypass_wr)) >> 3) + 1 + + (utx_len << 2); + wqe = (__be64 *)(rdev_p->ctrl_qp.workq + (rdev_p->ctrl_qp.wptr % + (1 << T3_CTRL_QP_SIZE_LOG2))); + + /* wptr in the WRID[31:0] */ + ((union t3_wrid *)(wqe+1))->id0.low = rdev_p->ctrl_qp.wptr; + + /* + * This must be the last write with a memory barrier + * for the genbit + */ + build_fw_riwrh((struct fw_riwrh *) wqe, T3_WR_BP, flag, + Q_GENBIT(rdev_p->ctrl_qp.wptr, + T3_CTRL_QP_SIZE_LOG2), T3_CTRL_QP_ID, + wr_len); + if (flag == T3_COMPLETION_FLAG) + ring_doorbell(rdev_p->ctrl_qp.doorbell, T3_CTRL_QP_ID); + len -= 96; + rdev_p->ctrl_qp.wptr++; + } + return 0; +} + +/* IN: stag key, pdid, perm, zbva, to, len, page_size, pbl, and pbl_size + * OUT: stag index, actual pbl_size, pbl_addr allocated. + * TBD: shared memory region support + */ +static int __cxio_tpt_op(struct cxio_rdev *rdev_p, u32 reset_tpt_entry, + u32 *stag, u8 stag_state, u32 pdid, + enum tpt_mem_type type, enum tpt_mem_perm perm, + u32 zbva, u64 to, u32 len, u8 page_size, __be64 *pbl, + u32 *pbl_size, u32 *pbl_addr) +{ + int err; + struct tpt_entry tpt; + u32 stag_idx; + u32 wptr; + int rereg = (*stag != T3_STAG_UNSET); + + stag_state = stag_state > 0; + stag_idx = (*stag) >> 8; + + if ((!reset_tpt_entry) && !(*stag != T3_STAG_UNSET)) { + stag_idx = cxio_hal_get_stag(rdev_p->rscp); + if (!stag_idx) + return -ENOMEM; + *stag = (stag_idx << 8) | ((*stag) & 0xFF); + } + PDBG("%s stag_state 0x%0x type 0x%0x pdid 0x%0x, stag_idx 0x%x\n", + __FUNCTION__, stag_state, type, pdid, stag_idx); + + if (reset_tpt_entry) + cxio_hal_pblpool_free(rdev_p, *pbl_addr, *pbl_size << 3); + else if (!rereg) { + *pbl_addr = cxio_hal_pblpool_alloc(rdev_p, *pbl_size << 3); + if (!*pbl_addr) { + return -ENOMEM; + } + } + + mutex_lock(&rdev_p->ctrl_qp.lock); + + /* write PBL first if any - update pbl only if pbl list exist */ + if (pbl) { + + PDBG("%s *pdb_addr 0x%x, pbl_base 0x%x, pbl_size %d\n", + __FUNCTION__, *pbl_addr, rdev_p->rnic_info.pbl_base, + *pbl_size); + err = cxio_hal_ctrl_qp_write_mem(rdev_p, + (*pbl_addr >> 5), + (*pbl_size << 3), pbl, 0); + if (err) + goto ret; + } + + /* write TPT entry */ + if (reset_tpt_entry) + memset(&tpt, 0, sizeof(tpt)); + else { + tpt.valid_stag_pdid = cpu_to_be32(F_TPT_VALID | + V_TPT_STAG_KEY((*stag) & M_TPT_STAG_KEY) | + V_TPT_STAG_STATE(stag_state) | + V_TPT_STAG_TYPE(type) | V_TPT_PDID(pdid)); + BUG_ON(page_size >= 28); + tpt.flags_pagesize_qpid = cpu_to_be32(V_TPT_PERM(perm) | + F_TPT_MW_BIND_ENABLE | + V_TPT_ADDR_TYPE((zbva ? TPT_ZBTO : TPT_VATO)) | + V_TPT_PAGE_SIZE(page_size)); + tpt.rsvd_pbl_addr = reset_tpt_entry ? 0 : + cpu_to_be32(V_TPT_PBL_ADDR(PBL_OFF(rdev_p, *pbl_addr)>>3)); + tpt.len = cpu_to_be32(len); + tpt.va_hi = cpu_to_be32((u32) (to >> 32)); + tpt.va_low_or_fbo = cpu_to_be32((u32) (to & 0xFFFFFFFFULL)); + tpt.rsvd_bind_cnt_or_pstag = 0; + tpt.rsvd_pbl_size = reset_tpt_entry ? 0 : + cpu_to_be32(V_TPT_PBL_SIZE((*pbl_size) >> 2)); + } + err = cxio_hal_ctrl_qp_write_mem(rdev_p, + stag_idx + + (rdev_p->rnic_info.tpt_base >> 5), + sizeof(tpt), &tpt, 1); + + /* release the stag index to free pool */ + if (reset_tpt_entry) + cxio_hal_put_stag(rdev_p->rscp, stag_idx); +ret: + wptr = rdev_p->ctrl_qp.wptr; + mutex_unlock(&rdev_p->ctrl_qp.lock); + if (!err) + if (wait_event_interruptible(rdev_p->ctrl_qp.waitq, + SEQ32_GE(rdev_p->ctrl_qp.rptr, + wptr))) + return -ERESTARTSYS; + return err; +} + +/* IN : stag key, pdid, pbl_size + * Out: stag index, actaul pbl_size, and pbl_addr allocated. + */ +int cxio_allocate_stag(struct cxio_rdev *rdev_p, u32 * stag, u32 pdid, + enum tpt_mem_perm perm, u32 * pbl_size, u32 * pbl_addr) +{ + *stag = T3_STAG_UNSET; + return (__cxio_tpt_op(rdev_p, 0, stag, 0, pdid, TPT_NON_SHARED_MR, + perm, 0, 0ULL, 0, 0, NULL, pbl_size, pbl_addr)); +} + +int cxio_register_phys_mem(struct cxio_rdev *rdev_p, u32 *stag, u32 pdid, + enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len, + u8 page_size, __be64 *pbl, u32 *pbl_size, + u32 *pbl_addr) +{ + *stag = T3_STAG_UNSET; + return __cxio_tpt_op(rdev_p, 0, stag, 1, pdid, TPT_NON_SHARED_MR, perm, + zbva, to, len, page_size, pbl, pbl_size, pbl_addr); +} + +int cxio_reregister_phys_mem(struct cxio_rdev *rdev_p, u32 *stag, u32 pdid, + enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len, + u8 page_size, __be64 *pbl, u32 *pbl_size, + u32 *pbl_addr) +{ + return __cxio_tpt_op(rdev_p, 0, stag, 1, pdid, TPT_NON_SHARED_MR, perm, + zbva, to, len, page_size, pbl, pbl_size, pbl_addr); +} + +int cxio_dereg_mem(struct cxio_rdev *rdev_p, u32 stag, u32 pbl_size, + u32 pbl_addr) +{ + return __cxio_tpt_op(rdev_p, 1, &stag, 0, 0, 0, 0, 0, 0ULL, 0, 0, NULL, + &pbl_size, &pbl_addr); +} + +int cxio_allocate_window(struct cxio_rdev *rdev_p, u32 * stag, u32 pdid) +{ + u32 pbl_size = 0; + *stag = T3_STAG_UNSET; + return __cxio_tpt_op(rdev_p, 0, stag, 0, pdid, TPT_MW, 0, 0, 0ULL, 0, 0, + NULL, &pbl_size, NULL); +} + +int cxio_deallocate_window(struct cxio_rdev *rdev_p, u32 stag) +{ + return __cxio_tpt_op(rdev_p, 1, &stag, 0, 0, 0, 0, 0, 0ULL, 0, 0, NULL, + NULL, NULL); +} + +int cxio_rdma_init(struct cxio_rdev *rdev_p, struct t3_rdma_init_attr *attr) +{ + struct t3_rdma_init_wr *wqe; + struct sk_buff *skb = alloc_skb(sizeof(*wqe), GFP_ATOMIC); + if (!skb) + return -ENOMEM; + PDBG("%s rdev_p %p\n", __FUNCTION__, rdev_p); + wqe = (struct t3_rdma_init_wr *) __skb_put(skb, sizeof(*wqe)); + wqe->wrh.op_seop_flags = cpu_to_be32(V_FW_RIWR_OP(T3_WR_INIT)); + wqe->wrh.gen_tid_len = cpu_to_be32(V_FW_RIWR_TID(attr->tid) | + V_FW_RIWR_LEN(sizeof(*wqe) >> 3)); + wqe->wrid.id1 = 0; + wqe->qpid = cpu_to_be32(attr->qpid); + wqe->pdid = cpu_to_be32(attr->pdid); + wqe->scqid = cpu_to_be32(attr->scqid); + wqe->rcqid = cpu_to_be32(attr->rcqid); + wqe->rq_addr = cpu_to_be32(attr->rq_addr - rdev_p->rnic_info.rqt_base); + wqe->rq_size = cpu_to_be32(attr->rq_size); + wqe->mpaattrs = attr->mpaattrs; + wqe->qpcaps = attr->qpcaps; + wqe->ulpdu_size = cpu_to_be16(attr->tcp_emss); + wqe->flags = cpu_to_be32(attr->flags); + wqe->ord = cpu_to_be32(attr->ord); + wqe->ird = cpu_to_be32(attr->ird); + wqe->qp_dma_addr = cpu_to_be64(attr->qp_dma_addr); + wqe->qp_dma_size = cpu_to_be32(attr->qp_dma_size); + wqe->rsvd = 0; + skb->priority = 0; /* 0=>ToeQ; 1=>CtrlQ */ + return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb)); +} + +void cxio_register_ev_cb(cxio_hal_ev_callback_func_t ev_cb) +{ + cxio_ev_cb = ev_cb; +} + +void cxio_unregister_ev_cb(cxio_hal_ev_callback_func_t ev_cb) +{ + cxio_ev_cb = NULL; +} + +static int cxio_hal_ev_handler(struct t3cdev *t3cdev_p, struct sk_buff *skb) +{ + static int cnt; + struct cxio_rdev *rdev_p = NULL; + struct respQ_msg_t *rsp_msg = (struct respQ_msg_t *) skb->data; + PDBG("%d: %s cq_id 0x%x cq_ptr 0x%x genbit %0x overflow %0x an %0x" + " se %0x notify %0x cqbranch %0x creditth %0x\n", + cnt, __FUNCTION__, RSPQ_CQID(rsp_msg), RSPQ_CQPTR(rsp_msg), + RSPQ_GENBIT(rsp_msg), RSPQ_OVERFLOW(rsp_msg), RSPQ_AN(rsp_msg), + RSPQ_SE(rsp_msg), RSPQ_NOTIFY(rsp_msg), RSPQ_CQBRANCH(rsp_msg), + RSPQ_CREDIT_THRESH(rsp_msg)); + PDBG("CQE: QPID 0x%0x genbit %0x type 0x%0x status 0x%0x opcode %d " + "len 0x%0x wrid_hi_stag 0x%x wrid_low_msn 0x%x\n", + CQE_QPID(rsp_msg->cqe), CQE_GENBIT(rsp_msg->cqe), + CQE_TYPE(rsp_msg->cqe), CQE_STATUS(rsp_msg->cqe), + CQE_OPCODE(rsp_msg->cqe), CQE_LEN(rsp_msg->cqe), + CQE_WRID_HI(rsp_msg->cqe), CQE_WRID_LOW(rsp_msg->cqe)); + rdev_p = (struct cxio_rdev *)t3cdev_p->ulp; + if (!rdev_p) { + PDBG("%s called by t3cdev %p with null ulp\n", __FUNCTION__, + t3cdev_p); + return 0; + } + if (CQE_QPID(rsp_msg->cqe) == T3_CTRL_QP_ID) { + rdev_p->ctrl_qp.rptr = CQE_WRID_LOW(rsp_msg->cqe) + 1; + wake_up_interruptible(&rdev_p->ctrl_qp.waitq); + dev_kfree_skb_irq(skb); + } else if (CQE_QPID(rsp_msg->cqe) == 0xfff8) + dev_kfree_skb_irq(skb); + else if (cxio_ev_cb) + (*cxio_ev_cb) (rdev_p, skb); + else + dev_kfree_skb_irq(skb); + cnt++; + return 0; +} + +/* Caller takes care of locking if needed */ +int cxio_rdev_open(struct cxio_rdev *rdev_p) +{ + struct net_device *netdev_p = NULL; + int err = 0; + if (strlen(rdev_p->dev_name)) { + if (cxio_hal_find_rdev_by_name(rdev_p->dev_name)) { + return -EBUSY; + } + netdev_p = dev_get_by_name(rdev_p->dev_name); + if (!netdev_p) { + return -EINVAL; + } + dev_put(netdev_p); + } else if (rdev_p->t3cdev_p) { + if (cxio_hal_find_rdev_by_t3cdev(rdev_p->t3cdev_p)) { + return -EBUSY; + } + netdev_p = rdev_p->t3cdev_p->lldev; + strncpy(rdev_p->dev_name, rdev_p->t3cdev_p->name, + T3_MAX_DEV_NAME_LEN); + } else { + PDBG("%s t3cdev_p or dev_name must be set\n", __FUNCTION__); + return -EINVAL; + } + + list_add_tail(&rdev_p->entry, &rdev_list); + + PDBG("%s opening rnic dev %s\n", __FUNCTION__, rdev_p->dev_name); + memset(&rdev_p->ctrl_qp, 0, sizeof(rdev_p->ctrl_qp)); + if (!rdev_p->t3cdev_p) + rdev_p->t3cdev_p = T3CDEV(netdev_p); + rdev_p->t3cdev_p->ulp = (void *) rdev_p; + err = rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, RDMA_GET_PARAMS, + &(rdev_p->rnic_info)); + if (err) { + printk(KERN_ERR "%s t3cdev_p(%p)->ctl returned error %d.\n", + __FUNCTION__, rdev_p->t3cdev_p, err); + goto err1; + } + err = rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, GET_PORTS, + &(rdev_p->port_info)); + if (err) { + printk(KERN_ERR "%s t3cdev_p(%p)->ctl returned error %d.\n", + __FUNCTION__, rdev_p->t3cdev_p, err); + goto err1; + } + + /* + * qpshift is the number of bits to shift the qpid left in order + * to get the correct address of the doorbell for that qp. + */ + cxio_init_ucontext(rdev_p, &rdev_p->uctx); + rdev_p->qpshift = PAGE_SHIFT - + ilog2(65536 >> + ilog2(rdev_p->rnic_info.udbell_len >> + PAGE_SHIFT)); + rdev_p->qpnr = rdev_p->rnic_info.udbell_len >> PAGE_SHIFT; + rdev_p->qpmask = (65536 >> ilog2(rdev_p->qpnr)) - 1; + PDBG("%s rnic %s info: tpt_base 0x%0x tpt_top 0x%0x num stags %d " + "pbl_base 0x%0x pbl_top 0x%0x rqt_base 0x%0x, rqt_top 0x%0x\n", + __FUNCTION__, rdev_p->dev_name, rdev_p->rnic_info.tpt_base, + rdev_p->rnic_info.tpt_top, cxio_num_stags(rdev_p), + rdev_p->rnic_info.pbl_base, + rdev_p->rnic_info.pbl_top, rdev_p->rnic_info.rqt_base, + rdev_p->rnic_info.rqt_top); + PDBG("udbell_len 0x%0x udbell_physbase 0x%lx kdb_addr %p qpshift %lu " + "qpnr %d qpmask 0x%x\n", + rdev_p->rnic_info.udbell_len, + rdev_p->rnic_info.udbell_physbase, rdev_p->rnic_info.kdb_addr, + rdev_p->qpshift, rdev_p->qpnr, rdev_p->qpmask); + + err = cxio_hal_init_ctrl_qp(rdev_p); + if (err) { + printk(KERN_ERR "%s error %d initializing ctrl_qp.\n", + __FUNCTION__, err); + goto err1; + } + err = cxio_hal_init_resource(rdev_p, cxio_num_stags(rdev_p), 0, + 0, T3_MAX_NUM_QP, T3_MAX_NUM_CQ, + T3_MAX_NUM_PD); + if (err) { + printk(KERN_ERR "%s error %d initializing hal resources.\n", + __FUNCTION__, err); + goto err2; + } + err = cxio_hal_pblpool_create(rdev_p); + if (err) { + printk(KERN_ERR "%s error %d initializing pbl mem pool.\n", + __FUNCTION__, err); + goto err3; + } + err = cxio_hal_rqtpool_create(rdev_p); + if (err) { + printk(KERN_ERR "%s error %d initializing rqt mem pool.\n", + __FUNCTION__, err); + goto err4; + } + return 0; +err4: + cxio_hal_pblpool_destroy(rdev_p); +err3: + cxio_hal_destroy_resource(rdev_p->rscp); +err2: + cxio_hal_destroy_ctrl_qp(rdev_p); +err1: + list_del(&rdev_p->entry); + return err; +} + +void cxio_rdev_close(struct cxio_rdev *rdev_p) +{ + if (rdev_p) { + cxio_hal_pblpool_destroy(rdev_p); + cxio_hal_rqtpool_destroy(rdev_p); + list_del(&rdev_p->entry); + rdev_p->t3cdev_p->ulp = NULL; + cxio_hal_destroy_ctrl_qp(rdev_p); + cxio_hal_destroy_resource(rdev_p->rscp); + } +} + +int __init cxio_hal_init(void) +{ + if (cxio_hal_init_rhdl_resource(T3_MAX_NUM_RI)) + return -ENOMEM; + t3_register_cpl_handler(CPL_ASYNC_NOTIF, cxio_hal_ev_handler); + return 0; +} + +void __exit cxio_hal_exit(void) +{ + struct cxio_rdev *rdev, *tmp; + + t3_register_cpl_handler(CPL_ASYNC_NOTIF, NULL); + list_for_each_entry_safe(rdev, tmp, &rdev_list, entry) + cxio_rdev_close(rdev); + cxio_hal_destroy_rhdl_resource(); +} + +static inline void flush_completed_wrs(struct t3_wq *wq, struct t3_cq *cq) +{ + struct t3_swsq *sqp; + __u32 ptr = wq->sq_rptr; + int count = Q_COUNT(wq->sq_rptr, wq->sq_wptr); + + sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2); + while (count--) + if (!sqp->signaled) { + ptr++; + sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2); + } else if (sqp->complete) { + + /* + * Insert this completed cqe into the swcq. + */ + PDBG("%s moving cqe into swcq sq idx %ld cq idx %ld\n", + __FUNCTION__, Q_PTR2IDX(ptr, wq->sq_size_log2), + Q_PTR2IDX(cq->sw_wptr, cq->size_log2)); + sqp->cqe.header |= htonl(V_CQE_SWCQE(1)); + *(cq->sw_queue + Q_PTR2IDX(cq->sw_wptr, cq->size_log2)) + = sqp->cqe; + cq->sw_wptr++; + sqp->signaled = 0; + break; + } else + break; +} + +static inline void create_read_req_cqe(struct t3_wq *wq, + struct t3_cqe *hw_cqe, + struct t3_cqe *read_cqe) +{ + read_cqe->u.scqe.wrid_hi = wq->oldest_read->sq_wptr; + read_cqe->len = wq->oldest_read->read_len; + read_cqe->header = htonl(V_CQE_QPID(CQE_QPID(*hw_cqe)) | + V_CQE_SWCQE(SW_CQE(*hw_cqe)) | + V_CQE_OPCODE(T3_READ_REQ) | + V_CQE_TYPE(1)); +} + +/* + * Return a ptr to the next read wr in the SWSQ or NULL. + */ +static inline void advance_oldest_read(struct t3_wq *wq) +{ + + u32 rptr = wq->oldest_read - wq->sq + 1; + u32 wptr = Q_PTR2IDX(wq->sq_wptr, wq->sq_size_log2); + + while (Q_PTR2IDX(rptr, wq->sq_size_log2) != wptr) { + wq->oldest_read = wq->sq + Q_PTR2IDX(rptr, wq->sq_size_log2); + + if (wq->oldest_read->opcode == T3_READ_REQ) + return; + rptr++; + } + wq->oldest_read = NULL; +} + +/* + * cxio_poll_cq + * + * Caller must: + * check the validity of the first CQE, + * supply the wq assicated with the qpid. + * + * credit: cq credit to return to sge. + * cqe_flushed: 1 iff the CQE is flushed. + * cqe: copy of the polled CQE. + * + * return value: + * 0 CQE returned, + * -1 CQE skipped, try again. + */ +int cxio_poll_cq(struct t3_wq *wq, struct t3_cq *cq, struct t3_cqe *cqe, + u8 *cqe_flushed, u64 *cookie, u32 *credit) +{ + int ret = 0; + struct t3_cqe *hw_cqe, read_cqe; + + *cqe_flushed = 0; + *credit = 0; + hw_cqe = cxio_next_cqe(cq); + + PDBG("%s CQE OOO %d qpid 0x%0x genbit %d type %d status 0x%0x" + " opcode 0x%0x len 0x%0x wrid_hi_stag 0x%x wrid_low_msn 0x%x\n", + __FUNCTION__, CQE_OOO(*hw_cqe), CQE_QPID(*hw_cqe), + CQE_GENBIT(*hw_cqe), CQE_TYPE(*hw_cqe), CQE_STATUS(*hw_cqe), + CQE_OPCODE(*hw_cqe), CQE_LEN(*hw_cqe), CQE_WRID_HI(*hw_cqe), + CQE_WRID_LOW(*hw_cqe)); + + /* + * skip cqe's not affiliated with a QP. + */ + if (wq == NULL) { + ret = -1; + goto skip_cqe; + } + + /* + * Gotta tweak READ completions: + * 1) the cqe doesn't contain the sq_wptr from the wr. + * 2) opcode not reflected from the wr. + * 3) read_len not reflected from the wr. + * 4) cq_type is RQ_TYPE not SQ_TYPE. + */ + if (RQ_TYPE(*hw_cqe) && (CQE_OPCODE(*hw_cqe) == T3_READ_RESP)) { + + /* + * Don't write to the HWCQ, so create a new read req CQE + * in local memory. + */ + create_read_req_cqe(wq, hw_cqe, &read_cqe); + hw_cqe = &read_cqe; + advance_oldest_read(wq); + } + + /* + * T3A: Discard TERMINATE CQEs. + */ + if (CQE_OPCODE(*hw_cqe) == T3_TERMINATE) { + ret = -1; + wq->error = 1; + goto skip_cqe; + } + + if (CQE_STATUS(*hw_cqe) || wq->error) { + *cqe_flushed = wq->error; + wq->error = 1; + + /* + * T3A inserts errors into the CQE. We cannot return + * these as work completions. + */ + /* incoming write failures */ + if ((CQE_OPCODE(*hw_cqe) == T3_RDMA_WRITE) + && RQ_TYPE(*hw_cqe)) { + ret = -1; + goto skip_cqe; + } + /* incoming read request failures */ + if ((CQE_OPCODE(*hw_cqe) == T3_READ_RESP) && SQ_TYPE(*hw_cqe)) { + ret = -1; + goto skip_cqe; + } + + /* incoming SEND with no receive posted failures */ + if ((CQE_OPCODE(*hw_cqe) == T3_SEND) && RQ_TYPE(*hw_cqe) && + Q_EMPTY(wq->rq_rptr, wq->rq_wptr)) { + ret = -1; + goto skip_cqe; + } + goto proc_cqe; + } + + /* + * RECV completion. + */ + if (RQ_TYPE(*hw_cqe)) { + + /* + * HW only validates 4 bits of MSN. So we must validate that + * the MSN in the SEND is the next expected MSN. If its not, + * then we complete this with TPT_ERR_MSN and mark the wq in + * error. + */ + if (unlikely((CQE_WRID_MSN(*hw_cqe) != (wq->rq_rptr + 1)))) { + wq->error = 1; + hw_cqe->header |= htonl(V_CQE_STATUS(TPT_ERR_MSN)); + goto proc_cqe; + } + goto proc_cqe; + } + + /* + * If we get here its a send completion. + * + * Handle out of order completion. These get stuffed + * in the SW SQ. Then the SW SQ is walked to move any + * now in-order completions into the SW CQ. This handles + * 2 cases: + * 1) reaping unsignaled WRs when the first subsequent + * signaled WR is completed. + * 2) out of order read completions. + */ + if (!SW_CQE(*hw_cqe) && (CQE_WRID_SQ_WPTR(*hw_cqe) != wq->sq_rptr)) { + struct t3_swsq *sqp; + + PDBG("%s out of order completion going in swsq at idx %ld\n", + __FUNCTION__, + Q_PTR2IDX(CQE_WRID_SQ_WPTR(*hw_cqe), wq->sq_size_log2)); + sqp = wq->sq + + Q_PTR2IDX(CQE_WRID_SQ_WPTR(*hw_cqe), wq->sq_size_log2); + sqp->cqe = *hw_cqe; + sqp->complete = 1; + ret = -1; + goto flush_wq; + } + +proc_cqe: + *cqe = *hw_cqe; + + /* + * Reap the associated WR(s) that are freed up with this + * completion. + */ + if (SQ_TYPE(*hw_cqe)) { + wq->sq_rptr = CQE_WRID_SQ_WPTR(*hw_cqe); + PDBG("%s completing sq idx %ld\n", __FUNCTION__, + Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2)); + *cookie = (wq->sq + + Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2))->wr_id; + wq->sq_rptr++; + } else { + PDBG("%s completing rq idx %ld\n", __FUNCTION__, + Q_PTR2IDX(wq->rq_rptr, wq->rq_size_log2)); + *cookie = *(wq->rq + Q_PTR2IDX(wq->rq_rptr, wq->rq_size_log2)); + wq->rq_rptr++; + } + +flush_wq: + /* + * Flush any completed cqes that are now in-order. + */ + flush_completed_wrs(wq, cq); + +skip_cqe: + if (SW_CQE(*hw_cqe)) { + PDBG("%s cq %p cqid 0x%x skip sw cqe sw_rptr 0x%x\n", + __FUNCTION__, cq, cq->cqid, cq->sw_rptr); + ++cq->sw_rptr; + } else { + PDBG("%s cq %p cqid 0x%x skip hw cqe rptr 0x%x\n", + __FUNCTION__, cq, cq->cqid, cq->rptr); + ++cq->rptr; + + /* + * T3A: compute credits. + */ + if (((cq->rptr - cq->wptr) > (1 << (cq->size_log2 - 1))) + || ((cq->rptr - cq->wptr) >= 128)) { + *credit = cq->rptr - cq->wptr; + cq->wptr = cq->rptr; + } + } + return ret; +} diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h new file mode 100644 index 000000000000..1b97e80b8780 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h @@ -0,0 +1,201 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __CXIO_HAL_H__ +#define __CXIO_HAL_H__ + +#include +#include + +#include "t3_cpl.h" +#include "t3cdev.h" +#include "cxgb3_ctl_defs.h" +#include "cxio_wr.h" + +#define T3_CTRL_QP_ID FW_RI_SGEEC_START +#define T3_CTL_QP_TID FW_RI_TID_START +#define T3_CTRL_QP_SIZE_LOG2 8 +#define T3_CTRL_CQ_ID 0 + +/* TBD */ +#define T3_MAX_NUM_RI (1<<15) +#define T3_MAX_NUM_QP (1<<15) +#define T3_MAX_NUM_CQ (1<<15) +#define T3_MAX_NUM_PD (1<<15) +#define T3_MAX_PBL_SIZE 256 +#define T3_MAX_RQ_SIZE 1024 +#define T3_MAX_NUM_STAG (1<<15) + +#define T3_STAG_UNSET 0xffffffff + +#define T3_MAX_DEV_NAME_LEN 32 + +struct cxio_hal_ctrl_qp { + u32 wptr; + u32 rptr; + struct mutex lock; /* for the wtpr, can sleep */ + wait_queue_head_t waitq;/* wait for RspQ/CQE msg */ + union t3_wr *workq; /* the work request queue */ + dma_addr_t dma_addr; /* pci bus address of the workq */ + DECLARE_PCI_UNMAP_ADDR(mapping) + void __iomem *doorbell; +}; + +struct cxio_hal_resource { + struct kfifo *tpt_fifo; + spinlock_t tpt_fifo_lock; + struct kfifo *qpid_fifo; + spinlock_t qpid_fifo_lock; + struct kfifo *cqid_fifo; + spinlock_t cqid_fifo_lock; + struct kfifo *pdid_fifo; + spinlock_t pdid_fifo_lock; +}; + +struct cxio_qpid_list { + struct list_head entry; + u32 qpid; +}; + +struct cxio_ucontext { + struct list_head qpids; + struct mutex lock; +}; + +struct cxio_rdev { + char dev_name[T3_MAX_DEV_NAME_LEN]; + struct t3cdev *t3cdev_p; + struct rdma_info rnic_info; + struct adap_ports port_info; + struct cxio_hal_resource *rscp; + struct cxio_hal_ctrl_qp ctrl_qp; + void *ulp; + unsigned long qpshift; + u32 qpnr; + u32 qpmask; + struct cxio_ucontext uctx; + struct gen_pool *pbl_pool; + struct gen_pool *rqt_pool; + struct list_head entry; +}; + +static inline int cxio_num_stags(struct cxio_rdev *rdev_p) +{ + return min((int)T3_MAX_NUM_STAG, (int)((rdev_p->rnic_info.tpt_top - rdev_p->rnic_info.tpt_base) >> 5)); +} + +typedef void (*cxio_hal_ev_callback_func_t) (struct cxio_rdev * rdev_p, + struct sk_buff * skb); + +#define RSPQ_CQID(rsp) (be32_to_cpu(rsp->cq_ptrid) & 0xffff) +#define RSPQ_CQPTR(rsp) ((be32_to_cpu(rsp->cq_ptrid) >> 16) & 0xffff) +#define RSPQ_GENBIT(rsp) ((be32_to_cpu(rsp->flags) >> 16) & 1) +#define RSPQ_OVERFLOW(rsp) ((be32_to_cpu(rsp->flags) >> 17) & 1) +#define RSPQ_AN(rsp) ((be32_to_cpu(rsp->flags) >> 18) & 1) +#define RSPQ_SE(rsp) ((be32_to_cpu(rsp->flags) >> 19) & 1) +#define RSPQ_NOTIFY(rsp) ((be32_to_cpu(rsp->flags) >> 20) & 1) +#define RSPQ_CQBRANCH(rsp) ((be32_to_cpu(rsp->flags) >> 21) & 1) +#define RSPQ_CREDIT_THRESH(rsp) ((be32_to_cpu(rsp->flags) >> 22) & 1) + +struct respQ_msg_t { + __be32 flags; /* flit 0 */ + __be32 cq_ptrid; + __be64 rsvd; /* flit 1 */ + struct t3_cqe cqe; /* flits 2-3 */ +}; + +enum t3_cq_opcode { + CQ_ARM_AN = 0x2, + CQ_ARM_SE = 0x6, + CQ_FORCE_AN = 0x3, + CQ_CREDIT_UPDATE = 0x7 +}; + +int cxio_rdev_open(struct cxio_rdev *rdev); +void cxio_rdev_close(struct cxio_rdev *rdev); +int cxio_hal_cq_op(struct cxio_rdev *rdev, struct t3_cq *cq, + enum t3_cq_opcode op, u32 credit); +int cxio_hal_clear_qp_ctx(struct cxio_rdev *rdev, u32 qpid); +int cxio_create_cq(struct cxio_rdev *rdev, struct t3_cq *cq); +int cxio_destroy_cq(struct cxio_rdev *rdev, struct t3_cq *cq); +int cxio_resize_cq(struct cxio_rdev *rdev, struct t3_cq *cq); +void cxio_release_ucontext(struct cxio_rdev *rdev, struct cxio_ucontext *uctx); +void cxio_init_ucontext(struct cxio_rdev *rdev, struct cxio_ucontext *uctx); +int cxio_create_qp(struct cxio_rdev *rdev, u32 kernel_domain, struct t3_wq *wq, + struct cxio_ucontext *uctx); +int cxio_destroy_qp(struct cxio_rdev *rdev, struct t3_wq *wq, + struct cxio_ucontext *uctx); +int cxio_peek_cq(struct t3_wq *wr, struct t3_cq *cq, int opcode); +int cxio_allocate_stag(struct cxio_rdev *rdev, u32 * stag, u32 pdid, + enum tpt_mem_perm perm, u32 * pbl_size, u32 * pbl_addr); +int cxio_register_phys_mem(struct cxio_rdev *rdev, u32 * stag, u32 pdid, + enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len, + u8 page_size, __be64 *pbl, u32 *pbl_size, + u32 *pbl_addr); +int cxio_reregister_phys_mem(struct cxio_rdev *rdev, u32 * stag, u32 pdid, + enum tpt_mem_perm perm, u32 zbva, u64 to, u32 len, + u8 page_size, __be64 *pbl, u32 *pbl_size, + u32 *pbl_addr); +int cxio_dereg_mem(struct cxio_rdev *rdev, u32 stag, u32 pbl_size, + u32 pbl_addr); +int cxio_allocate_window(struct cxio_rdev *rdev, u32 * stag, u32 pdid); +int cxio_deallocate_window(struct cxio_rdev *rdev, u32 stag); +int cxio_rdma_init(struct cxio_rdev *rdev, struct t3_rdma_init_attr *attr); +void cxio_register_ev_cb(cxio_hal_ev_callback_func_t ev_cb); +void cxio_unregister_ev_cb(cxio_hal_ev_callback_func_t ev_cb); +u32 cxio_hal_get_rhdl(void); +void cxio_hal_put_rhdl(u32 rhdl); +u32 cxio_hal_get_pdid(struct cxio_hal_resource *rscp); +void cxio_hal_put_pdid(struct cxio_hal_resource *rscp, u32 pdid); +int __init cxio_hal_init(void); +void __exit cxio_hal_exit(void); +void cxio_flush_rq(struct t3_wq *wq, struct t3_cq *cq, int count); +void cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count); +void cxio_count_rcqes(struct t3_cq *cq, struct t3_wq *wq, int *count); +void cxio_count_scqes(struct t3_cq *cq, struct t3_wq *wq, int *count); +void cxio_flush_hw_cq(struct t3_cq *cq); +int cxio_poll_cq(struct t3_wq *wq, struct t3_cq *cq, struct t3_cqe *cqe, + u8 *cqe_flushed, u64 *cookie, u32 *credit); + +#define MOD "iw_cxgb3: " +#define PDBG(fmt, args...) pr_debug(MOD fmt, ## args) + +#ifdef DEBUG +void cxio_dump_tpt(struct cxio_rdev *rev, u32 stag); +void cxio_dump_pbl(struct cxio_rdev *rev, u32 pbl_addr, uint len, u8 shift); +void cxio_dump_wqe(union t3_wr *wqe); +void cxio_dump_wce(struct t3_cqe *wce); +void cxio_dump_rqt(struct cxio_rdev *rdev, u32 hwtid, int nents); +void cxio_dump_tcb(struct cxio_rdev *rdev, u32 hwtid); +#endif + +#endif diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.c b/drivers/infiniband/hw/cxgb3/cxio_resource.c new file mode 100644 index 000000000000..997aa32cbf07 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_resource.c @@ -0,0 +1,331 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +/* Crude resource management */ +#include +#include +#include +#include +#include +#include +#include "cxio_resource.h" +#include "cxio_hal.h" + +static struct kfifo *rhdl_fifo; +static spinlock_t rhdl_fifo_lock; + +#define RANDOM_SIZE 16 + +static int __cxio_init_resource_fifo(struct kfifo **fifo, + spinlock_t *fifo_lock, + u32 nr, u32 skip_low, + u32 skip_high, + int random) +{ + u32 i, j, entry = 0, idx; + u32 random_bytes; + u32 rarray[16]; + spin_lock_init(fifo_lock); + + *fifo = kfifo_alloc(nr * sizeof(u32), GFP_KERNEL, fifo_lock); + if (IS_ERR(*fifo)) + return -ENOMEM; + + for (i = 0; i < skip_low + skip_high; i++) + __kfifo_put(*fifo, (unsigned char *) &entry, sizeof(u32)); + if (random) { + j = 0; + random_bytes = random32(); + for (i = 0; i < RANDOM_SIZE; i++) + rarray[i] = i + skip_low; + for (i = skip_low + RANDOM_SIZE; i < nr - skip_high; i++) { + if (j >= RANDOM_SIZE) { + j = 0; + random_bytes = random32(); + } + idx = (random_bytes >> (j * 2)) & 0xF; + __kfifo_put(*fifo, + (unsigned char *) &rarray[idx], + sizeof(u32)); + rarray[idx] = i; + j++; + } + for (i = 0; i < RANDOM_SIZE; i++) + __kfifo_put(*fifo, + (unsigned char *) &rarray[i], + sizeof(u32)); + } else + for (i = skip_low; i < nr - skip_high; i++) + __kfifo_put(*fifo, (unsigned char *) &i, sizeof(u32)); + + for (i = 0; i < skip_low + skip_high; i++) + kfifo_get(*fifo, (unsigned char *) &entry, sizeof(u32)); + return 0; +} + +static int cxio_init_resource_fifo(struct kfifo **fifo, spinlock_t * fifo_lock, + u32 nr, u32 skip_low, u32 skip_high) +{ + return (__cxio_init_resource_fifo(fifo, fifo_lock, nr, skip_low, + skip_high, 0)); +} + +static int cxio_init_resource_fifo_random(struct kfifo **fifo, + spinlock_t * fifo_lock, + u32 nr, u32 skip_low, u32 skip_high) +{ + + return (__cxio_init_resource_fifo(fifo, fifo_lock, nr, skip_low, + skip_high, 1)); +} + +static int cxio_init_qpid_fifo(struct cxio_rdev *rdev_p) +{ + u32 i; + + spin_lock_init(&rdev_p->rscp->qpid_fifo_lock); + + rdev_p->rscp->qpid_fifo = kfifo_alloc(T3_MAX_NUM_QP * sizeof(u32), + GFP_KERNEL, + &rdev_p->rscp->qpid_fifo_lock); + if (IS_ERR(rdev_p->rscp->qpid_fifo)) + return -ENOMEM; + + for (i = 16; i < T3_MAX_NUM_QP; i++) + if (!(i & rdev_p->qpmask)) + __kfifo_put(rdev_p->rscp->qpid_fifo, + (unsigned char *) &i, sizeof(u32)); + return 0; +} + +int cxio_hal_init_rhdl_resource(u32 nr_rhdl) +{ + return cxio_init_resource_fifo(&rhdl_fifo, &rhdl_fifo_lock, nr_rhdl, 1, + 0); +} + +void cxio_hal_destroy_rhdl_resource(void) +{ + kfifo_free(rhdl_fifo); +} + +/* nr_* must be power of 2 */ +int cxio_hal_init_resource(struct cxio_rdev *rdev_p, + u32 nr_tpt, u32 nr_pbl, + u32 nr_rqt, u32 nr_qpid, u32 nr_cqid, u32 nr_pdid) +{ + int err = 0; + struct cxio_hal_resource *rscp; + + rscp = kmalloc(sizeof(*rscp), GFP_KERNEL); + if (!rscp) + return -ENOMEM; + rdev_p->rscp = rscp; + err = cxio_init_resource_fifo_random(&rscp->tpt_fifo, + &rscp->tpt_fifo_lock, + nr_tpt, 1, 0); + if (err) + goto tpt_err; + err = cxio_init_qpid_fifo(rdev_p); + if (err) + goto qpid_err; + err = cxio_init_resource_fifo(&rscp->cqid_fifo, &rscp->cqid_fifo_lock, + nr_cqid, 1, 0); + if (err) + goto cqid_err; + err = cxio_init_resource_fifo(&rscp->pdid_fifo, &rscp->pdid_fifo_lock, + nr_pdid, 1, 0); + if (err) + goto pdid_err; + return 0; +pdid_err: + kfifo_free(rscp->cqid_fifo); +cqid_err: + kfifo_free(rscp->qpid_fifo); +qpid_err: + kfifo_free(rscp->tpt_fifo); +tpt_err: + return -ENOMEM; +} + +/* + * returns 0 if no resource available + */ +static inline u32 cxio_hal_get_resource(struct kfifo *fifo) +{ + u32 entry; + if (kfifo_get(fifo, (unsigned char *) &entry, sizeof(u32))) + return entry; + else + return 0; /* fifo emptry */ +} + +static inline void cxio_hal_put_resource(struct kfifo *fifo, u32 entry) +{ + BUG_ON(kfifo_put(fifo, (unsigned char *) &entry, sizeof(u32)) == 0); +} + +u32 cxio_hal_get_rhdl(void) +{ + return cxio_hal_get_resource(rhdl_fifo); +} + +void cxio_hal_put_rhdl(u32 rhdl) +{ + cxio_hal_put_resource(rhdl_fifo, rhdl); +} + +u32 cxio_hal_get_stag(struct cxio_hal_resource *rscp) +{ + return cxio_hal_get_resource(rscp->tpt_fifo); +} + +void cxio_hal_put_stag(struct cxio_hal_resource *rscp, u32 stag) +{ + cxio_hal_put_resource(rscp->tpt_fifo, stag); +} + +u32 cxio_hal_get_qpid(struct cxio_hal_resource *rscp) +{ + u32 qpid = cxio_hal_get_resource(rscp->qpid_fifo); + PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid); + return qpid; +} + +void cxio_hal_put_qpid(struct cxio_hal_resource *rscp, u32 qpid) +{ + PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid); + cxio_hal_put_resource(rscp->qpid_fifo, qpid); +} + +u32 cxio_hal_get_cqid(struct cxio_hal_resource *rscp) +{ + return cxio_hal_get_resource(rscp->cqid_fifo); +} + +void cxio_hal_put_cqid(struct cxio_hal_resource *rscp, u32 cqid) +{ + cxio_hal_put_resource(rscp->cqid_fifo, cqid); +} + +u32 cxio_hal_get_pdid(struct cxio_hal_resource *rscp) +{ + return cxio_hal_get_resource(rscp->pdid_fifo); +} + +void cxio_hal_put_pdid(struct cxio_hal_resource *rscp, u32 pdid) +{ + cxio_hal_put_resource(rscp->pdid_fifo, pdid); +} + +void cxio_hal_destroy_resource(struct cxio_hal_resource *rscp) +{ + kfifo_free(rscp->tpt_fifo); + kfifo_free(rscp->cqid_fifo); + kfifo_free(rscp->qpid_fifo); + kfifo_free(rscp->pdid_fifo); + kfree(rscp); +} + +/* + * PBL Memory Manager. Uses Linux generic allocator. + */ + +#define MIN_PBL_SHIFT 8 /* 256B == min PBL size (32 entries) */ +#define PBL_CHUNK 2*1024*1024 + +u32 cxio_hal_pblpool_alloc(struct cxio_rdev *rdev_p, int size) +{ + unsigned long addr = gen_pool_alloc(rdev_p->pbl_pool, size); + PDBG("%s addr 0x%x size %d\n", __FUNCTION__, (u32)addr, size); + return (u32)addr; +} + +void cxio_hal_pblpool_free(struct cxio_rdev *rdev_p, u32 addr, int size) +{ + PDBG("%s addr 0x%x size %d\n", __FUNCTION__, addr, size); + gen_pool_free(rdev_p->pbl_pool, (unsigned long)addr, size); +} + +int cxio_hal_pblpool_create(struct cxio_rdev *rdev_p) +{ + unsigned long i; + rdev_p->pbl_pool = gen_pool_create(MIN_PBL_SHIFT, -1); + if (rdev_p->pbl_pool) + for (i = rdev_p->rnic_info.pbl_base; + i <= rdev_p->rnic_info.pbl_top - PBL_CHUNK + 1; + i += PBL_CHUNK) + gen_pool_add(rdev_p->pbl_pool, i, PBL_CHUNK, -1); + return rdev_p->pbl_pool ? 0 : -ENOMEM; +} + +void cxio_hal_pblpool_destroy(struct cxio_rdev *rdev_p) +{ + gen_pool_destroy(rdev_p->pbl_pool); +} + +/* + * RQT Memory Manager. Uses Linux generic allocator. + */ + +#define MIN_RQT_SHIFT 10 /* 1KB == mini RQT size (16 entries) */ +#define RQT_CHUNK 2*1024*1024 + +u32 cxio_hal_rqtpool_alloc(struct cxio_rdev *rdev_p, int size) +{ + unsigned long addr = gen_pool_alloc(rdev_p->rqt_pool, size << 6); + PDBG("%s addr 0x%x size %d\n", __FUNCTION__, (u32)addr, size << 6); + return (u32)addr; +} + +void cxio_hal_rqtpool_free(struct cxio_rdev *rdev_p, u32 addr, int size) +{ + PDBG("%s addr 0x%x size %d\n", __FUNCTION__, addr, size << 6); + gen_pool_free(rdev_p->rqt_pool, (unsigned long)addr, size << 6); +} + +int cxio_hal_rqtpool_create(struct cxio_rdev *rdev_p) +{ + unsigned long i; + rdev_p->rqt_pool = gen_pool_create(MIN_RQT_SHIFT, -1); + if (rdev_p->rqt_pool) + for (i = rdev_p->rnic_info.rqt_base; + i <= rdev_p->rnic_info.rqt_top - RQT_CHUNK + 1; + i += RQT_CHUNK) + gen_pool_add(rdev_p->rqt_pool, i, RQT_CHUNK, -1); + return rdev_p->rqt_pool ? 0 : -ENOMEM; +} + +void cxio_hal_rqtpool_destroy(struct cxio_rdev *rdev_p) +{ + gen_pool_destroy(rdev_p->rqt_pool); +} diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.h b/drivers/infiniband/hw/cxgb3/cxio_resource.h new file mode 100644 index 000000000000..a6bbe8370d81 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_resource.h @@ -0,0 +1,70 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __CXIO_RESOURCE_H__ +#define __CXIO_RESOURCE_H__ + +#include +#include +#include +#include +#include +#include +#include +#include "cxio_hal.h" + +extern int cxio_hal_init_rhdl_resource(u32 nr_rhdl); +extern void cxio_hal_destroy_rhdl_resource(void); +extern int cxio_hal_init_resource(struct cxio_rdev *rdev_p, + u32 nr_tpt, u32 nr_pbl, + u32 nr_rqt, u32 nr_qpid, u32 nr_cqid, + u32 nr_pdid); +extern u32 cxio_hal_get_stag(struct cxio_hal_resource *rscp); +extern void cxio_hal_put_stag(struct cxio_hal_resource *rscp, u32 stag); +extern u32 cxio_hal_get_qpid(struct cxio_hal_resource *rscp); +extern void cxio_hal_put_qpid(struct cxio_hal_resource *rscp, u32 qpid); +extern u32 cxio_hal_get_cqid(struct cxio_hal_resource *rscp); +extern void cxio_hal_put_cqid(struct cxio_hal_resource *rscp, u32 cqid); +extern void cxio_hal_destroy_resource(struct cxio_hal_resource *rscp); + +#define PBL_OFF(rdev_p, a) ( (a) - (rdev_p)->rnic_info.pbl_base ) +extern int cxio_hal_pblpool_create(struct cxio_rdev *rdev_p); +extern void cxio_hal_pblpool_destroy(struct cxio_rdev *rdev_p); +extern u32 cxio_hal_pblpool_alloc(struct cxio_rdev *rdev_p, int size); +extern void cxio_hal_pblpool_free(struct cxio_rdev *rdev_p, u32 addr, int size); + +#define RQT_OFF(rdev_p, a) ( (a) - (rdev_p)->rnic_info.rqt_base ) +extern int cxio_hal_rqtpool_create(struct cxio_rdev *rdev_p); +extern void cxio_hal_rqtpool_destroy(struct cxio_rdev *rdev_p); +extern u32 cxio_hal_rqtpool_alloc(struct cxio_rdev *rdev_p, int size); +extern void cxio_hal_rqtpool_free(struct cxio_rdev *rdev_p, u32 addr, int size); +#endif diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h new file mode 100644 index 000000000000..103fc42d6976 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h @@ -0,0 +1,685 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __CXIO_WR_H__ +#define __CXIO_WR_H__ + +#include +#include +#include +#include "firmware_exports.h" + +#define T3_MAX_SGE 4 + +#define Q_EMPTY(rptr,wptr) ((rptr)==(wptr)) +#define Q_FULL(rptr,wptr,size_log2) ( (((wptr)-(rptr))>>(size_log2)) && \ + ((rptr)!=(wptr)) ) +#define Q_GENBIT(ptr,size_log2) (!(((ptr)>>size_log2)&0x1)) +#define Q_FREECNT(rptr,wptr,size_log2) ((1UL<> S_FW_RIWR_OP)) & M_FW_RIWR_OP) + +#define S_FW_RIWR_SOPEOP 22 +#define M_FW_RIWR_SOPEOP 0x3 +#define V_FW_RIWR_SOPEOP(x) ((x) << S_FW_RIWR_SOPEOP) + +#define S_FW_RIWR_FLAGS 8 +#define M_FW_RIWR_FLAGS 0x3fffff +#define V_FW_RIWR_FLAGS(x) ((x) << S_FW_RIWR_FLAGS) +#define G_FW_RIWR_FLAGS(x) ((((x) >> S_FW_RIWR_FLAGS)) & M_FW_RIWR_FLAGS) + +#define S_FW_RIWR_TID 8 +#define V_FW_RIWR_TID(x) ((x) << S_FW_RIWR_TID) + +#define S_FW_RIWR_LEN 0 +#define V_FW_RIWR_LEN(x) ((x) << S_FW_RIWR_LEN) + +#define S_FW_RIWR_GEN 31 +#define V_FW_RIWR_GEN(x) ((x) << S_FW_RIWR_GEN) + +struct t3_sge { + __be32 stag; + __be32 len; + __be64 to; +}; + +/* If num_sgle is zero, flit 5+ contains immediate data.*/ +struct t3_send_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + + u8 rdmaop; /* 2 */ + u8 reserved[3]; + __be32 rem_stag; + __be32 plen; /* 3 */ + __be32 num_sgle; + struct t3_sge sgl[T3_MAX_SGE]; /* 4+ */ +}; + +struct t3_local_inv_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + __be32 stag; /* 2 */ + __be32 reserved3; +}; + +struct t3_rdma_write_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + u8 rdmaop; /* 2 */ + u8 reserved[3]; + __be32 stag_sink; + __be64 to_sink; /* 3 */ + __be32 plen; /* 4 */ + __be32 num_sgle; + struct t3_sge sgl[T3_MAX_SGE]; /* 5+ */ +}; + +struct t3_rdma_read_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + u8 rdmaop; /* 2 */ + u8 reserved[3]; + __be32 rem_stag; + __be64 rem_to; /* 3 */ + __be32 local_stag; /* 4 */ + __be32 local_len; + __be64 local_to; /* 5 */ +}; + +enum t3_addr_type { + T3_VA_BASED_TO = 0x0, + T3_ZERO_BASED_TO = 0x1 +} __attribute__ ((packed)); + +enum t3_mem_perms { + T3_MEM_ACCESS_LOCAL_READ = 0x1, + T3_MEM_ACCESS_LOCAL_WRITE = 0x2, + T3_MEM_ACCESS_REM_READ = 0x4, + T3_MEM_ACCESS_REM_WRITE = 0x8 +} __attribute__ ((packed)); + +struct t3_bind_mw_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + u16 reserved; /* 2 */ + u8 type; + u8 perms; + __be32 mr_stag; + __be32 mw_stag; /* 3 */ + __be32 mw_len; + __be64 mw_va; /* 4 */ + __be32 mr_pbl_addr; /* 5 */ + u8 reserved2[3]; + u8 mr_pagesz; +}; + +struct t3_receive_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + u8 pagesz[T3_MAX_SGE]; + __be32 num_sgle; /* 2 */ + struct t3_sge sgl[T3_MAX_SGE]; /* 3+ */ + __be32 pbl_addr[T3_MAX_SGE]; +}; + +struct t3_bypass_wr { + struct fw_riwrh wrh; + union t3_wrid wrid; /* 1 */ +}; + +struct t3_modify_qp_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + __be32 flags; /* 2 */ + __be32 quiesce; /* 2 */ + __be32 max_ird; /* 3 */ + __be32 max_ord; /* 3 */ + __be64 sge_cmd; /* 4 */ + __be64 ctx1; /* 5 */ + __be64 ctx0; /* 6 */ +}; + +enum t3_modify_qp_flags { + MODQP_QUIESCE = 0x01, + MODQP_MAX_IRD = 0x02, + MODQP_MAX_ORD = 0x04, + MODQP_WRITE_EC = 0x08, + MODQP_READ_EC = 0x10, +}; + + +enum t3_mpa_attrs { + uP_RI_MPA_RX_MARKER_ENABLE = 0x1, + uP_RI_MPA_TX_MARKER_ENABLE = 0x2, + uP_RI_MPA_CRC_ENABLE = 0x4, + uP_RI_MPA_IETF_ENABLE = 0x8 +} __attribute__ ((packed)); + +enum t3_qp_caps { + uP_RI_QP_RDMA_READ_ENABLE = 0x01, + uP_RI_QP_RDMA_WRITE_ENABLE = 0x02, + uP_RI_QP_BIND_ENABLE = 0x04, + uP_RI_QP_FAST_REGISTER_ENABLE = 0x08, + uP_RI_QP_STAG0_ENABLE = 0x10 +} __attribute__ ((packed)); + +struct t3_rdma_init_attr { + u32 tid; + u32 qpid; + u32 pdid; + u32 scqid; + u32 rcqid; + u32 rq_addr; + u32 rq_size; + enum t3_mpa_attrs mpaattrs; + enum t3_qp_caps qpcaps; + u16 tcp_emss; + u32 ord; + u32 ird; + u64 qp_dma_addr; + u32 qp_dma_size; + u32 flags; +}; + +struct t3_rdma_init_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + __be32 qpid; /* 2 */ + __be32 pdid; + __be32 scqid; /* 3 */ + __be32 rcqid; + __be32 rq_addr; /* 4 */ + __be32 rq_size; + u8 mpaattrs; /* 5 */ + u8 qpcaps; + __be16 ulpdu_size; + __be32 flags; /* bits 31-1 - reservered */ + /* bit 0 - set if RECV posted */ + __be32 ord; /* 6 */ + __be32 ird; + __be64 qp_dma_addr; /* 7 */ + __be32 qp_dma_size; /* 8 */ + u32 rsvd; +}; + +struct t3_genbit { + u64 flit[15]; + __be64 genbit; +}; + +enum rdma_init_wr_flags { + RECVS_POSTED = 1, +}; + +union t3_wr { + struct t3_send_wr send; + struct t3_rdma_write_wr write; + struct t3_rdma_read_wr read; + struct t3_receive_wr recv; + struct t3_local_inv_wr local_inv; + struct t3_bind_mw_wr bind; + struct t3_bypass_wr bypass; + struct t3_rdma_init_wr init; + struct t3_modify_qp_wr qp_mod; + struct t3_genbit genbit; + u64 flit[16]; +}; + +#define T3_SQ_CQE_FLIT 13 +#define T3_SQ_COOKIE_FLIT 14 + +#define T3_RQ_COOKIE_FLIT 13 +#define T3_RQ_CQE_FLIT 14 + +static inline enum t3_wr_opcode fw_riwrh_opcode(struct fw_riwrh *wqe) +{ + return G_FW_RIWR_OP(be32_to_cpu(wqe->op_seop_flags)); +} + +static inline void build_fw_riwrh(struct fw_riwrh *wqe, enum t3_wr_opcode op, + enum t3_wr_flags flags, u8 genbit, u32 tid, + u8 len) +{ + wqe->op_seop_flags = cpu_to_be32(V_FW_RIWR_OP(op) | + V_FW_RIWR_SOPEOP(M_FW_RIWR_SOPEOP) | + V_FW_RIWR_FLAGS(flags)); + wmb(); + wqe->gen_tid_len = cpu_to_be32(V_FW_RIWR_GEN(genbit) | + V_FW_RIWR_TID(tid) | + V_FW_RIWR_LEN(len)); + /* 2nd gen bit... */ + ((union t3_wr *)wqe)->genbit.genbit = cpu_to_be64(genbit); +} + +/* + * T3 ULP2_TX commands + */ +enum t3_utx_mem_op { + T3_UTX_MEM_READ = 2, + T3_UTX_MEM_WRITE = 3 +}; + +/* T3 MC7 RDMA TPT entry format */ + +enum tpt_mem_type { + TPT_NON_SHARED_MR = 0x0, + TPT_SHARED_MR = 0x1, + TPT_MW = 0x2, + TPT_MW_RELAXED_PROTECTION = 0x3 +}; + +enum tpt_addr_type { + TPT_ZBTO = 0, + TPT_VATO = 1 +}; + +enum tpt_mem_perm { + TPT_LOCAL_READ = 0x8, + TPT_LOCAL_WRITE = 0x4, + TPT_REMOTE_READ = 0x2, + TPT_REMOTE_WRITE = 0x1 +}; + +struct tpt_entry { + __be32 valid_stag_pdid; + __be32 flags_pagesize_qpid; + + __be32 rsvd_pbl_addr; + __be32 len; + __be32 va_hi; + __be32 va_low_or_fbo; + + __be32 rsvd_bind_cnt_or_pstag; + __be32 rsvd_pbl_size; +}; + +#define S_TPT_VALID 31 +#define V_TPT_VALID(x) ((x) << S_TPT_VALID) +#define F_TPT_VALID V_TPT_VALID(1U) + +#define S_TPT_STAG_KEY 23 +#define M_TPT_STAG_KEY 0xFF +#define V_TPT_STAG_KEY(x) ((x) << S_TPT_STAG_KEY) +#define G_TPT_STAG_KEY(x) (((x) >> S_TPT_STAG_KEY) & M_TPT_STAG_KEY) + +#define S_TPT_STAG_STATE 22 +#define V_TPT_STAG_STATE(x) ((x) << S_TPT_STAG_STATE) +#define F_TPT_STAG_STATE V_TPT_STAG_STATE(1U) + +#define S_TPT_STAG_TYPE 20 +#define M_TPT_STAG_TYPE 0x3 +#define V_TPT_STAG_TYPE(x) ((x) << S_TPT_STAG_TYPE) +#define G_TPT_STAG_TYPE(x) (((x) >> S_TPT_STAG_TYPE) & M_TPT_STAG_TYPE) + +#define S_TPT_PDID 0 +#define M_TPT_PDID 0xFFFFF +#define V_TPT_PDID(x) ((x) << S_TPT_PDID) +#define G_TPT_PDID(x) (((x) >> S_TPT_PDID) & M_TPT_PDID) + +#define S_TPT_PERM 28 +#define M_TPT_PERM 0xF +#define V_TPT_PERM(x) ((x) << S_TPT_PERM) +#define G_TPT_PERM(x) (((x) >> S_TPT_PERM) & M_TPT_PERM) + +#define S_TPT_REM_INV_DIS 27 +#define V_TPT_REM_INV_DIS(x) ((x) << S_TPT_REM_INV_DIS) +#define F_TPT_REM_INV_DIS V_TPT_REM_INV_DIS(1U) + +#define S_TPT_ADDR_TYPE 26 +#define V_TPT_ADDR_TYPE(x) ((x) << S_TPT_ADDR_TYPE) +#define F_TPT_ADDR_TYPE V_TPT_ADDR_TYPE(1U) + +#define S_TPT_MW_BIND_ENABLE 25 +#define V_TPT_MW_BIND_ENABLE(x) ((x) << S_TPT_MW_BIND_ENABLE) +#define F_TPT_MW_BIND_ENABLE V_TPT_MW_BIND_ENABLE(1U) + +#define S_TPT_PAGE_SIZE 20 +#define M_TPT_PAGE_SIZE 0x1F +#define V_TPT_PAGE_SIZE(x) ((x) << S_TPT_PAGE_SIZE) +#define G_TPT_PAGE_SIZE(x) (((x) >> S_TPT_PAGE_SIZE) & M_TPT_PAGE_SIZE) + +#define S_TPT_PBL_ADDR 0 +#define M_TPT_PBL_ADDR 0x1FFFFFFF +#define V_TPT_PBL_ADDR(x) ((x) << S_TPT_PBL_ADDR) +#define G_TPT_PBL_ADDR(x) (((x) >> S_TPT_PBL_ADDR) & M_TPT_PBL_ADDR) + +#define S_TPT_QPID 0 +#define M_TPT_QPID 0xFFFFF +#define V_TPT_QPID(x) ((x) << S_TPT_QPID) +#define G_TPT_QPID(x) (((x) >> S_TPT_QPID) & M_TPT_QPID) + +#define S_TPT_PSTAG 0 +#define M_TPT_PSTAG 0xFFFFFF +#define V_TPT_PSTAG(x) ((x) << S_TPT_PSTAG) +#define G_TPT_PSTAG(x) (((x) >> S_TPT_PSTAG) & M_TPT_PSTAG) + +#define S_TPT_PBL_SIZE 0 +#define M_TPT_PBL_SIZE 0xFFFFF +#define V_TPT_PBL_SIZE(x) ((x) << S_TPT_PBL_SIZE) +#define G_TPT_PBL_SIZE(x) (((x) >> S_TPT_PBL_SIZE) & M_TPT_PBL_SIZE) + +/* + * CQE defs + */ +struct t3_cqe { + __be32 header; + __be32 len; + union { + struct { + __be32 stag; + __be32 msn; + } rcqe; + struct { + u32 wrid_hi; + u32 wrid_low; + } scqe; + } u; +}; + +#define S_CQE_OOO 31 +#define M_CQE_OOO 0x1 +#define G_CQE_OOO(x) ((((x) >> S_CQE_OOO)) & M_CQE_OOO) +#define V_CEQ_OOO(x) ((x)<> S_CQE_QPID)) & M_CQE_QPID) +#define V_CQE_QPID(x) ((x)<> S_CQE_SWCQE)) & M_CQE_SWCQE) +#define V_CQE_SWCQE(x) ((x)<> S_CQE_GENBIT) & M_CQE_GENBIT) +#define V_CQE_GENBIT(x) ((x)<> S_CQE_STATUS)) & M_CQE_STATUS) +#define V_CQE_STATUS(x) ((x)<> S_CQE_TYPE)) & M_CQE_TYPE) +#define V_CQE_TYPE(x) ((x)<> S_CQE_OPCODE)) & M_CQE_OPCODE) +#define V_CQE_OPCODE(x) ((x)<queue->flit[13] = 1; +} + +static inline struct t3_cqe *cxio_next_hw_cqe(struct t3_cq *cq) +{ + struct t3_cqe *cqe; + + cqe = cq->queue + (Q_PTR2IDX(cq->rptr, cq->size_log2)); + if (CQ_VLD_ENTRY(cq->rptr, cq->size_log2, cqe)) + return cqe; + return NULL; +} + +static inline struct t3_cqe *cxio_next_sw_cqe(struct t3_cq *cq) +{ + struct t3_cqe *cqe; + + if (!Q_EMPTY(cq->sw_rptr, cq->sw_wptr)) { + cqe = cq->sw_queue + (Q_PTR2IDX(cq->sw_rptr, cq->size_log2)); + return cqe; + } + return NULL; +} + +static inline struct t3_cqe *cxio_next_cqe(struct t3_cq *cq) +{ + struct t3_cqe *cqe; + + if (!Q_EMPTY(cq->sw_rptr, cq->sw_wptr)) { + cqe = cq->sw_queue + (Q_PTR2IDX(cq->sw_rptr, cq->size_log2)); + return cqe; + } + cqe = cq->queue + (Q_PTR2IDX(cq->rptr, cq->size_log2)); + if (CQ_VLD_ENTRY(cq->rptr, cq->size_log2, cqe)) + return cqe; + return NULL; +} + +#endif diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c new file mode 100644 index 000000000000..4611afa52220 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch.c @@ -0,0 +1,189 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include + +#include + +#include "cxgb3_offload.h" +#include "iwch_provider.h" +#include "iwch_user.h" +#include "iwch.h" +#include "iwch_cm.h" + +#define DRV_VERSION "1.1" + +MODULE_AUTHOR("Boyd Faulkner, Steve Wise"); +MODULE_DESCRIPTION("Chelsio T3 RDMA Driver"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(DRV_VERSION); + +cxgb3_cpl_handler_func t3c_handlers[NUM_CPL_CMDS]; + +static void open_rnic_dev(struct t3cdev *); +static void close_rnic_dev(struct t3cdev *); + +struct cxgb3_client t3c_client = { + .name = "iw_cxgb3", + .add = open_rnic_dev, + .remove = close_rnic_dev, + .handlers = t3c_handlers, + .redirect = iwch_ep_redirect +}; + +static LIST_HEAD(dev_list); +static DEFINE_MUTEX(dev_mutex); + +static void rnic_init(struct iwch_dev *rnicp) +{ + PDBG("%s iwch_dev %p\n", __FUNCTION__, rnicp); + idr_init(&rnicp->cqidr); + idr_init(&rnicp->qpidr); + idr_init(&rnicp->mmidr); + spin_lock_init(&rnicp->lock); + + rnicp->attr.vendor_id = 0x168; + rnicp->attr.vendor_part_id = 7; + rnicp->attr.max_qps = T3_MAX_NUM_QP - 32; + rnicp->attr.max_wrs = (1UL << 24) - 1; + rnicp->attr.max_sge_per_wr = T3_MAX_SGE; + rnicp->attr.max_sge_per_rdma_write_wr = T3_MAX_SGE; + rnicp->attr.max_cqs = T3_MAX_NUM_CQ - 1; + rnicp->attr.max_cqes_per_cq = (1UL << 24) - 1; + rnicp->attr.max_mem_regs = cxio_num_stags(&rnicp->rdev); + rnicp->attr.max_phys_buf_entries = T3_MAX_PBL_SIZE; + rnicp->attr.max_pds = T3_MAX_NUM_PD - 1; + rnicp->attr.mem_pgsizes_bitmask = 0x7FFF; /* 4KB-128MB */ + rnicp->attr.can_resize_wq = 0; + rnicp->attr.max_rdma_reads_per_qp = 8; + rnicp->attr.max_rdma_read_resources = + rnicp->attr.max_rdma_reads_per_qp * rnicp->attr.max_qps; + rnicp->attr.max_rdma_read_qp_depth = 8; /* IRD */ + rnicp->attr.max_rdma_read_depth = + rnicp->attr.max_rdma_read_qp_depth * rnicp->attr.max_qps; + rnicp->attr.rq_overflow_handled = 0; + rnicp->attr.can_modify_ird = 0; + rnicp->attr.can_modify_ord = 0; + rnicp->attr.max_mem_windows = rnicp->attr.max_mem_regs - 1; + rnicp->attr.stag0_value = 1; + rnicp->attr.zbva_support = 1; + rnicp->attr.local_invalidate_fence = 1; + rnicp->attr.cq_overflow_detection = 1; + return; +} + +static void open_rnic_dev(struct t3cdev *tdev) +{ + struct iwch_dev *rnicp; + static int vers_printed; + + PDBG("%s t3cdev %p\n", __FUNCTION__, tdev); + if (!vers_printed++) + printk(KERN_INFO MOD "Chelsio T3 RDMA Driver - version %s\n", + DRV_VERSION); + rnicp = (struct iwch_dev *)ib_alloc_device(sizeof(*rnicp)); + if (!rnicp) { + printk(KERN_ERR MOD "Cannot allocate ib device\n"); + return; + } + rnicp->rdev.ulp = rnicp; + rnicp->rdev.t3cdev_p = tdev; + + mutex_lock(&dev_mutex); + + if (cxio_rdev_open(&rnicp->rdev)) { + mutex_unlock(&dev_mutex); + printk(KERN_ERR MOD "Unable to open CXIO rdev\n"); + ib_dealloc_device(&rnicp->ibdev); + return; + } + + rnic_init(rnicp); + + list_add_tail(&rnicp->entry, &dev_list); + mutex_unlock(&dev_mutex); + + if (iwch_register_device(rnicp)) { + printk(KERN_ERR MOD "Unable to register device\n"); + close_rnic_dev(tdev); + } + printk(KERN_INFO MOD "Initialized device %s\n", + pci_name(rnicp->rdev.rnic_info.pdev)); + return; +} + +static void close_rnic_dev(struct t3cdev *tdev) +{ + struct iwch_dev *dev, *tmp; + PDBG("%s t3cdev %p\n", __FUNCTION__, tdev); + mutex_lock(&dev_mutex); + list_for_each_entry_safe(dev, tmp, &dev_list, entry) { + if (dev->rdev.t3cdev_p == tdev) { + list_del(&dev->entry); + iwch_unregister_device(dev); + cxio_rdev_close(&dev->rdev); + idr_destroy(&dev->cqidr); + idr_destroy(&dev->qpidr); + idr_destroy(&dev->mmidr); + ib_dealloc_device(&dev->ibdev); + break; + } + } + mutex_unlock(&dev_mutex); +} + +static int __init iwch_init_module(void) +{ + int err; + + err = cxio_hal_init(); + if (err) + return err; + err = iwch_cm_init(); + if (err) + return err; + cxio_register_ev_cb(iwch_ev_dispatch); + cxgb3_register_client(&t3c_client); + return 0; +} + +static void __exit iwch_exit_module(void) +{ + cxgb3_unregister_client(&t3c_client); + cxio_unregister_ev_cb(iwch_ev_dispatch); + iwch_cm_term(); + cxio_hal_exit(); +} + +module_init(iwch_init_module); +module_exit(iwch_exit_module); diff --git a/drivers/infiniband/hw/cxgb3/iwch.h b/drivers/infiniband/hw/cxgb3/iwch.h new file mode 100644 index 000000000000..6517ef85026f --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch.h @@ -0,0 +1,177 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __IWCH_H__ +#define __IWCH_H__ + +#include +#include +#include +#include + +#include + +#include "cxio_hal.h" +#include "cxgb3_offload.h" + +struct iwch_pd; +struct iwch_cq; +struct iwch_qp; +struct iwch_mr; + +struct iwch_rnic_attributes { + u32 vendor_id; + u32 vendor_part_id; + u32 max_qps; + u32 max_wrs; /* Max for any SQ/RQ */ + u32 max_sge_per_wr; + u32 max_sge_per_rdma_write_wr; /* for RDMA Write WR */ + u32 max_cqs; + u32 max_cqes_per_cq; + u32 max_mem_regs; + u32 max_phys_buf_entries; /* for phys buf list */ + u32 max_pds; + + /* + * The memory page sizes supported by this RNIC. + * Bit position i in bitmap indicates page of + * size (4k)^i. Phys block list mode unsupported. + */ + u32 mem_pgsizes_bitmask; + u8 can_resize_wq; + + /* + * The maximum number of RDMA Reads that can be outstanding + * per QP with this RNIC as the target. + */ + u32 max_rdma_reads_per_qp; + + /* + * The maximum number of resources used for RDMA Reads + * by this RNIC with this RNIC as the target. + */ + u32 max_rdma_read_resources; + + /* + * The max depth per QP for initiation of RDMA Read + * by this RNIC. + */ + u32 max_rdma_read_qp_depth; + + /* + * The maximum depth for initiation of RDMA Read + * operations by this RNIC on all QPs + */ + u32 max_rdma_read_depth; + u8 rq_overflow_handled; + u32 can_modify_ird; + u32 can_modify_ord; + u32 max_mem_windows; + u32 stag0_value; + u8 zbva_support; + u8 local_invalidate_fence; + u32 cq_overflow_detection; +}; + +struct iwch_dev { + struct ib_device ibdev; + struct cxio_rdev rdev; + u32 device_cap_flags; + struct iwch_rnic_attributes attr; + struct idr cqidr; + struct idr qpidr; + struct idr mmidr; + spinlock_t lock; + struct list_head entry; +}; + +static inline struct iwch_dev *to_iwch_dev(struct ib_device *ibdev) +{ + return container_of(ibdev, struct iwch_dev, ibdev); +} + +static inline int t3b_device(const struct iwch_dev *rhp) +{ + return rhp->rdev.t3cdev_p->type == T3B; +} + +static inline int t3a_device(const struct iwch_dev *rhp) +{ + return rhp->rdev.t3cdev_p->type == T3A; +} + +static inline struct iwch_cq *get_chp(struct iwch_dev *rhp, u32 cqid) +{ + return idr_find(&rhp->cqidr, cqid); +} + +static inline struct iwch_qp *get_qhp(struct iwch_dev *rhp, u32 qpid) +{ + return idr_find(&rhp->qpidr, qpid); +} + +static inline struct iwch_mr *get_mhp(struct iwch_dev *rhp, u32 mmid) +{ + return idr_find(&rhp->mmidr, mmid); +} + +static inline int insert_handle(struct iwch_dev *rhp, struct idr *idr, + void *handle, u32 id) +{ + int ret; + u32 newid; + + do { + if (!idr_pre_get(idr, GFP_KERNEL)) { + return -ENOMEM; + } + spin_lock_irq(&rhp->lock); + ret = idr_get_new_above(idr, handle, id, &newid); + BUG_ON(newid != id); + spin_unlock_irq(&rhp->lock); + } while (ret == -EAGAIN); + + return ret; +} + +static inline void remove_handle(struct iwch_dev *rhp, struct idr *idr, u32 id) +{ + spin_lock_irq(&rhp->lock); + idr_remove(idr, id); + spin_unlock_irq(&rhp->lock); +} + +extern struct cxgb3_client t3c_client; +extern cxgb3_cpl_handler_func t3c_handlers[NUM_CPL_CMDS]; +extern void iwch_ev_dispatch(struct cxio_rdev *rdev_p, struct sk_buff *skb); + +#endif diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c new file mode 100644 index 000000000000..a522b1baa3b4 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -0,0 +1,2081 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "tcb.h" +#include "cxgb3_offload.h" +#include "iwch.h" +#include "iwch_provider.h" +#include "iwch_cm.h" + +static char *states[] = { + "idle", + "listen", + "connecting", + "mpa_wait_req", + "mpa_req_sent", + "mpa_req_rcvd", + "mpa_rep_sent", + "fpdu_mode", + "aborting", + "closing", + "moribund", + "dead", + NULL, +}; + +static int ep_timeout_secs = 10; +module_param(ep_timeout_secs, int, 0444); +MODULE_PARM_DESC(ep_timeout_secs, "CM Endpoint operation timeout " + "in seconds (default=10)"); + +static int mpa_rev = 1; +module_param(mpa_rev, int, 0444); +MODULE_PARM_DESC(mpa_rev, "MPA Revision, 0 supports amso1100, " + "1 is spec compliant. (default=1)"); + +static int markers_enabled = 0; +module_param(markers_enabled, int, 0444); +MODULE_PARM_DESC(markers_enabled, "Enable MPA MARKERS (default(0)=disabled)"); + +static int crc_enabled = 1; +module_param(crc_enabled, int, 0444); +MODULE_PARM_DESC(crc_enabled, "Enable MPA CRC (default(1)=enabled)"); + +static int rcv_win = 256 * 1024; +module_param(rcv_win, int, 0444); +MODULE_PARM_DESC(rcv_win, "TCP receive window in bytes (default=256)"); + +static int snd_win = 32 * 1024; +module_param(snd_win, int, 0444); +MODULE_PARM_DESC(snd_win, "TCP send window in bytes (default=32KB)"); + +static unsigned int nocong = 0; +module_param(nocong, uint, 0444); +MODULE_PARM_DESC(nocong, "Turn off congestion control (default=0)"); + +static unsigned int cong_flavor = 1; +module_param(cong_flavor, uint, 0444); +MODULE_PARM_DESC(cong_flavor, "TCP Congestion control flavor (default=1)"); + +static void process_work(struct work_struct *work); +static struct workqueue_struct *workq; +static DECLARE_WORK(skb_work, process_work); + +static struct sk_buff_head rxq; +static cxgb3_cpl_handler_func work_handlers[NUM_CPL_CMDS]; + +static struct sk_buff *get_skb(struct sk_buff *skb, int len, gfp_t gfp); +static void ep_timeout(unsigned long arg); +static void connect_reply_upcall(struct iwch_ep *ep, int status); + +static void start_ep_timer(struct iwch_ep *ep) +{ + PDBG("%s ep %p\n", __FUNCTION__, ep); + if (timer_pending(&ep->timer)) { + PDBG("%s stopped / restarted timer ep %p\n", __FUNCTION__, ep); + del_timer_sync(&ep->timer); + } else + get_ep(&ep->com); + ep->timer.expires = jiffies + ep_timeout_secs * HZ; + ep->timer.data = (unsigned long)ep; + ep->timer.function = ep_timeout; + add_timer(&ep->timer); +} + +static void stop_ep_timer(struct iwch_ep *ep) +{ + PDBG("%s ep %p\n", __FUNCTION__, ep); + del_timer_sync(&ep->timer); + put_ep(&ep->com); +} + +static void release_tid(struct t3cdev *tdev, u32 hwtid, struct sk_buff *skb) +{ + struct cpl_tid_release *req; + + skb = get_skb(skb, sizeof *req, GFP_KERNEL); + if (!skb) + return; + req = (struct cpl_tid_release *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, hwtid)); + skb->priority = CPL_PRIORITY_SETUP; + tdev->send(tdev, skb); + return; +} + +int iwch_quiesce_tid(struct iwch_ep *ep) +{ + struct cpl_set_tcb_field *req; + struct sk_buff *skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + + if (!skb) + return -ENOMEM; + req = (struct cpl_set_tcb_field *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, ep->hwtid)); + req->reply = 0; + req->cpu_idx = 0; + req->word = htons(W_TCB_RX_QUIESCE); + req->mask = cpu_to_be64(1ULL << S_TCB_RX_QUIESCE); + req->val = cpu_to_be64(1 << S_TCB_RX_QUIESCE); + + skb->priority = CPL_PRIORITY_DATA; + ep->com.tdev->send(ep->com.tdev, skb); + return 0; +} + +int iwch_resume_tid(struct iwch_ep *ep) +{ + struct cpl_set_tcb_field *req; + struct sk_buff *skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + + if (!skb) + return -ENOMEM; + req = (struct cpl_set_tcb_field *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, ep->hwtid)); + req->reply = 0; + req->cpu_idx = 0; + req->word = htons(W_TCB_RX_QUIESCE); + req->mask = cpu_to_be64(1ULL << S_TCB_RX_QUIESCE); + req->val = 0; + + skb->priority = CPL_PRIORITY_DATA; + ep->com.tdev->send(ep->com.tdev, skb); + return 0; +} + +static void set_emss(struct iwch_ep *ep, u16 opt) +{ + PDBG("%s ep %p opt %u\n", __FUNCTION__, ep, opt); + ep->emss = T3C_DATA(ep->com.tdev)->mtus[G_TCPOPT_MSS(opt)] - 40; + if (G_TCPOPT_TSTAMP(opt)) + ep->emss -= 12; + if (ep->emss < 128) + ep->emss = 128; + PDBG("emss=%d\n", ep->emss); +} + +static enum iwch_ep_state state_read(struct iwch_ep_common *epc) +{ + unsigned long flags; + enum iwch_ep_state state; + + spin_lock_irqsave(&epc->lock, flags); + state = epc->state; + spin_unlock_irqrestore(&epc->lock, flags); + return state; +} + +static inline void __state_set(struct iwch_ep_common *epc, + enum iwch_ep_state new) +{ + epc->state = new; +} + +static void state_set(struct iwch_ep_common *epc, enum iwch_ep_state new) +{ + unsigned long flags; + + spin_lock_irqsave(&epc->lock, flags); + PDBG("%s - %s -> %s\n", __FUNCTION__, states[epc->state], states[new]); + __state_set(epc, new); + spin_unlock_irqrestore(&epc->lock, flags); + return; +} + +static void *alloc_ep(int size, gfp_t gfp) +{ + struct iwch_ep_common *epc; + + epc = kmalloc(size, gfp); + if (epc) { + memset(epc, 0, size); + kref_init(&epc->kref); + spin_lock_init(&epc->lock); + init_waitqueue_head(&epc->waitq); + } + PDBG("%s alloc ep %p\n", __FUNCTION__, epc); + return epc; +} + +void __free_ep(struct kref *kref) +{ + struct iwch_ep_common *epc; + epc = container_of(kref, struct iwch_ep_common, kref); + PDBG("%s ep %p state %s\n", __FUNCTION__, epc, states[state_read(epc)]); + kfree(epc); +} + +static void release_ep_resources(struct iwch_ep *ep) +{ + PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, ep->hwtid); + cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid); + dst_release(ep->dst); + l2t_release(L2DATA(ep->com.tdev), ep->l2t); + if (ep->com.tdev->type == T3B) + release_tid(ep->com.tdev, ep->hwtid, NULL); + put_ep(&ep->com); +} + +static void process_work(struct work_struct *work) +{ + struct sk_buff *skb = NULL; + void *ep; + struct t3cdev *tdev; + int ret; + + while ((skb = skb_dequeue(&rxq))) { + ep = *((void **) (skb->cb)); + tdev = *((struct t3cdev **) (skb->cb + sizeof(void *))); + ret = work_handlers[G_OPCODE(ntohl((__force __be32)skb->csum))](tdev, skb, ep); + if (ret & CPL_RET_BUF_DONE) + kfree_skb(skb); + + /* + * ep was referenced in sched(), and is freed here. + */ + put_ep((struct iwch_ep_common *)ep); + } +} + +static int status2errno(int status) +{ + switch (status) { + case CPL_ERR_NONE: + return 0; + case CPL_ERR_CONN_RESET: + return -ECONNRESET; + case CPL_ERR_ARP_MISS: + return -EHOSTUNREACH; + case CPL_ERR_CONN_TIMEDOUT: + return -ETIMEDOUT; + case CPL_ERR_TCAM_FULL: + return -ENOMEM; + case CPL_ERR_CONN_EXIST: + return -EADDRINUSE; + default: + return -EIO; + } +} + +/* + * Try and reuse skbs already allocated... + */ +static struct sk_buff *get_skb(struct sk_buff *skb, int len, gfp_t gfp) +{ + if (skb) { + BUG_ON(skb_cloned(skb)); + skb_trim(skb, 0); + skb_get(skb); + } else { + skb = alloc_skb(len, gfp); + } + return skb; +} + +static struct rtable *find_route(struct t3cdev *dev, __be32 local_ip, + __be32 peer_ip, __be16 local_port, + __be16 peer_port, u8 tos) +{ + struct rtable *rt; + struct flowi fl = { + .oif = 0, + .nl_u = { + .ip4_u = { + .daddr = peer_ip, + .saddr = local_ip, + .tos = tos} + }, + .proto = IPPROTO_TCP, + .uli_u = { + .ports = { + .sport = local_port, + .dport = peer_port} + } + }; + + if (ip_route_output_flow(&rt, &fl, NULL, 0)) + return NULL; + return rt; +} + +static unsigned int find_best_mtu(const struct t3c_data *d, unsigned short mtu) +{ + int i = 0; + + while (i < d->nmtus - 1 && d->mtus[i + 1] <= mtu) + ++i; + return i; +} + +static void arp_failure_discard(struct t3cdev *dev, struct sk_buff *skb) +{ + PDBG("%s t3cdev %p\n", __FUNCTION__, dev); + kfree_skb(skb); +} + +/* + * Handle an ARP failure for an active open. + */ +static void act_open_req_arp_failure(struct t3cdev *dev, struct sk_buff *skb) +{ + printk(KERN_ERR MOD "ARP failure duing connect\n"); + kfree_skb(skb); +} + +/* + * Handle an ARP failure for a CPL_ABORT_REQ. Change it into a no RST variant + * and send it along. + */ +static void abort_arp_failure(struct t3cdev *dev, struct sk_buff *skb) +{ + struct cpl_abort_req *req = cplhdr(skb); + + PDBG("%s t3cdev %p\n", __FUNCTION__, dev); + req->cmd = CPL_ABORT_NO_RST; + cxgb3_ofld_send(dev, skb); +} + +static int send_halfclose(struct iwch_ep *ep, gfp_t gfp) +{ + struct cpl_close_con_req *req; + struct sk_buff *skb; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + skb = get_skb(NULL, sizeof(*req), gfp); + if (!skb) { + printk(KERN_ERR MOD "%s - failed to alloc skb\n", __FUNCTION__); + return -ENOMEM; + } + skb->priority = CPL_PRIORITY_DATA; + set_arp_failure_handler(skb, arp_failure_discard); + req = (struct cpl_close_con_req *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_CLOSE_CON)); + req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_CON_REQ, ep->hwtid)); + l2t_send(ep->com.tdev, skb, ep->l2t); + return 0; +} + +static int send_abort(struct iwch_ep *ep, struct sk_buff *skb, gfp_t gfp) +{ + struct cpl_abort_req *req; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + skb = get_skb(skb, sizeof(*req), gfp); + if (!skb) { + printk(KERN_ERR MOD "%s - failed to alloc skb.\n", + __FUNCTION__); + return -ENOMEM; + } + skb->priority = CPL_PRIORITY_DATA; + set_arp_failure_handler(skb, abort_arp_failure); + req = (struct cpl_abort_req *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ)); + req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ABORT_REQ, ep->hwtid)); + req->cmd = CPL_ABORT_SEND_RST; + l2t_send(ep->com.tdev, skb, ep->l2t); + return 0; +} + +static int send_connect(struct iwch_ep *ep) +{ + struct cpl_act_open_req *req; + struct sk_buff *skb; + u32 opt0h, opt0l, opt2; + unsigned int mtu_idx; + int wscale; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + + skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "%s - failed to alloc skb.\n", + __FUNCTION__); + return -ENOMEM; + } + mtu_idx = find_best_mtu(T3C_DATA(ep->com.tdev), dst_mtu(ep->dst)); + wscale = compute_wscale(rcv_win); + opt0h = V_NAGLE(0) | + V_NO_CONG(nocong) | + V_KEEP_ALIVE(1) | + F_TCAM_BYPASS | + V_WND_SCALE(wscale) | + V_MSS_IDX(mtu_idx) | + V_L2T_IDX(ep->l2t->idx) | V_TX_CHANNEL(ep->l2t->smt_idx); + opt0l = V_TOS((ep->tos >> 2) & M_TOS) | V_RCV_BUFSIZ(rcv_win>>10); + opt2 = V_FLAVORS_VALID(1) | V_CONG_CONTROL_FLAVOR(cong_flavor); + skb->priority = CPL_PRIORITY_SETUP; + set_arp_failure_handler(skb, act_open_req_arp_failure); + + req = (struct cpl_act_open_req *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ACT_OPEN_REQ, ep->atid)); + req->local_port = ep->com.local_addr.sin_port; + req->peer_port = ep->com.remote_addr.sin_port; + req->local_ip = ep->com.local_addr.sin_addr.s_addr; + req->peer_ip = ep->com.remote_addr.sin_addr.s_addr; + req->opt0h = htonl(opt0h); + req->opt0l = htonl(opt0l); + req->params = 0; + req->opt2 = htonl(opt2); + l2t_send(ep->com.tdev, skb, ep->l2t); + return 0; +} + +static void send_mpa_req(struct iwch_ep *ep, struct sk_buff *skb) +{ + int mpalen; + struct tx_data_wr *req; + struct mpa_message *mpa; + int len; + + PDBG("%s ep %p pd_len %d\n", __FUNCTION__, ep, ep->plen); + + BUG_ON(skb_cloned(skb)); + + mpalen = sizeof(*mpa) + ep->plen; + if (skb->data + mpalen + sizeof(*req) > skb->end) { + kfree_skb(skb); + skb=alloc_skb(mpalen + sizeof(*req), GFP_KERNEL); + if (!skb) { + connect_reply_upcall(ep, -ENOMEM); + return; + } + } + skb_trim(skb, 0); + skb_reserve(skb, sizeof(*req)); + skb_put(skb, mpalen); + skb->priority = CPL_PRIORITY_DATA; + mpa = (struct mpa_message *) skb->data; + memset(mpa, 0, sizeof(*mpa)); + memcpy(mpa->key, MPA_KEY_REQ, sizeof(mpa->key)); + mpa->flags = (crc_enabled ? MPA_CRC : 0) | + (markers_enabled ? MPA_MARKERS : 0); + mpa->private_data_size = htons(ep->plen); + mpa->revision = mpa_rev; + + if (ep->plen) + memcpy(mpa->private_data, ep->mpa_pkt + sizeof(*mpa), ep->plen); + + /* + * Reference the mpa skb. This ensures the data area + * will remain in memory until the hw acks the tx. + * Function tx_ack() will deref it. + */ + skb_get(skb); + set_arp_failure_handler(skb, arp_failure_discard); + skb->h.raw = skb->data; + len = skb->len; + req = (struct tx_data_wr *) skb_push(skb, sizeof(*req)); + req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA)); + req->wr_lo = htonl(V_WR_TID(ep->hwtid)); + req->len = htonl(len); + req->param = htonl(V_TX_PORT(ep->l2t->smt_idx) | + V_TX_SNDBUF(snd_win>>15)); + req->flags = htonl(F_TX_IMM_ACK|F_TX_INIT); + req->sndseq = htonl(ep->snd_seq); + BUG_ON(ep->mpa_skb); + ep->mpa_skb = skb; + l2t_send(ep->com.tdev, skb, ep->l2t); + start_ep_timer(ep); + state_set(&ep->com, MPA_REQ_SENT); + return; +} + +static int send_mpa_reject(struct iwch_ep *ep, const void *pdata, u8 plen) +{ + int mpalen; + struct tx_data_wr *req; + struct mpa_message *mpa; + struct sk_buff *skb; + + PDBG("%s ep %p plen %d\n", __FUNCTION__, ep, plen); + + mpalen = sizeof(*mpa) + plen; + + skb = get_skb(NULL, mpalen + sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "%s - cannot alloc skb!\n", __FUNCTION__); + return -ENOMEM; + } + skb_reserve(skb, sizeof(*req)); + mpa = (struct mpa_message *) skb_put(skb, mpalen); + memset(mpa, 0, sizeof(*mpa)); + memcpy(mpa->key, MPA_KEY_REP, sizeof(mpa->key)); + mpa->flags = MPA_REJECT; + mpa->revision = mpa_rev; + mpa->private_data_size = htons(plen); + if (plen) + memcpy(mpa->private_data, pdata, plen); + + /* + * Reference the mpa skb again. This ensures the data area + * will remain in memory until the hw acks the tx. + * Function tx_ack() will deref it. + */ + skb_get(skb); + skb->priority = CPL_PRIORITY_DATA; + set_arp_failure_handler(skb, arp_failure_discard); + skb->h.raw = skb->data; + req = (struct tx_data_wr *) skb_push(skb, sizeof(*req)); + req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA)); + req->wr_lo = htonl(V_WR_TID(ep->hwtid)); + req->len = htonl(mpalen); + req->param = htonl(V_TX_PORT(ep->l2t->smt_idx) | + V_TX_SNDBUF(snd_win>>15)); + req->flags = htonl(F_TX_IMM_ACK|F_TX_INIT); + req->sndseq = htonl(ep->snd_seq); + BUG_ON(ep->mpa_skb); + ep->mpa_skb = skb; + l2t_send(ep->com.tdev, skb, ep->l2t); + return 0; +} + +static int send_mpa_reply(struct iwch_ep *ep, const void *pdata, u8 plen) +{ + int mpalen; + struct tx_data_wr *req; + struct mpa_message *mpa; + int len; + struct sk_buff *skb; + + PDBG("%s ep %p plen %d\n", __FUNCTION__, ep, plen); + + mpalen = sizeof(*mpa) + plen; + + skb = get_skb(NULL, mpalen + sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "%s - cannot alloc skb!\n", __FUNCTION__); + return -ENOMEM; + } + skb->priority = CPL_PRIORITY_DATA; + skb_reserve(skb, sizeof(*req)); + mpa = (struct mpa_message *) skb_put(skb, mpalen); + memset(mpa, 0, sizeof(*mpa)); + memcpy(mpa->key, MPA_KEY_REP, sizeof(mpa->key)); + mpa->flags = (ep->mpa_attr.crc_enabled ? MPA_CRC : 0) | + (markers_enabled ? MPA_MARKERS : 0); + mpa->revision = mpa_rev; + mpa->private_data_size = htons(plen); + if (plen) + memcpy(mpa->private_data, pdata, plen); + + /* + * Reference the mpa skb. This ensures the data area + * will remain in memory until the hw acks the tx. + * Function tx_ack() will deref it. + */ + skb_get(skb); + set_arp_failure_handler(skb, arp_failure_discard); + skb->h.raw = skb->data; + len = skb->len; + req = (struct tx_data_wr *) skb_push(skb, sizeof(*req)); + req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA)); + req->wr_lo = htonl(V_WR_TID(ep->hwtid)); + req->len = htonl(len); + req->param = htonl(V_TX_PORT(ep->l2t->smt_idx) | + V_TX_SNDBUF(snd_win>>15)); + req->flags = htonl(F_TX_MORE | F_TX_IMM_ACK | F_TX_INIT); + req->sndseq = htonl(ep->snd_seq); + ep->mpa_skb = skb; + state_set(&ep->com, MPA_REP_SENT); + l2t_send(ep->com.tdev, skb, ep->l2t); + return 0; +} + +static int act_establish(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct cpl_act_establish *req = cplhdr(skb); + unsigned int tid = GET_TID(req); + + PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, tid); + + dst_confirm(ep->dst); + + /* setup the hwtid for this connection */ + ep->hwtid = tid; + cxgb3_insert_tid(ep->com.tdev, &t3c_client, ep, tid); + + ep->snd_seq = ntohl(req->snd_isn); + + set_emss(ep, ntohs(req->tcp_opt)); + + /* dealloc the atid */ + cxgb3_free_atid(ep->com.tdev, ep->atid); + + /* start MPA negotiation */ + send_mpa_req(ep, skb); + + return 0; +} + +static void abort_connection(struct iwch_ep *ep, struct sk_buff *skb, gfp_t gfp) +{ + PDBG("%s ep %p\n", __FILE__, ep); + state_set(&ep->com, ABORTING); + send_abort(ep, skb, gfp); +} + +static void close_complete_upcall(struct iwch_ep *ep) +{ + struct iw_cm_event event; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_CLOSE; + if (ep->com.cm_id) { + PDBG("close complete delivered ep %p cm_id %p tid %d\n", + ep, ep->com.cm_id, ep->hwtid); + ep->com.cm_id->event_handler(ep->com.cm_id, &event); + ep->com.cm_id->rem_ref(ep->com.cm_id); + ep->com.cm_id = NULL; + ep->com.qp = NULL; + } +} + +static void peer_close_upcall(struct iwch_ep *ep) +{ + struct iw_cm_event event; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_DISCONNECT; + if (ep->com.cm_id) { + PDBG("peer close delivered ep %p cm_id %p tid %d\n", + ep, ep->com.cm_id, ep->hwtid); + ep->com.cm_id->event_handler(ep->com.cm_id, &event); + } +} + +static void peer_abort_upcall(struct iwch_ep *ep) +{ + struct iw_cm_event event; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_CLOSE; + event.status = -ECONNRESET; + if (ep->com.cm_id) { + PDBG("abort delivered ep %p cm_id %p tid %d\n", ep, + ep->com.cm_id, ep->hwtid); + ep->com.cm_id->event_handler(ep->com.cm_id, &event); + ep->com.cm_id->rem_ref(ep->com.cm_id); + ep->com.cm_id = NULL; + ep->com.qp = NULL; + } +} + +static void connect_reply_upcall(struct iwch_ep *ep, int status) +{ + struct iw_cm_event event; + + PDBG("%s ep %p status %d\n", __FUNCTION__, ep, status); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_CONNECT_REPLY; + event.status = status; + event.local_addr = ep->com.local_addr; + event.remote_addr = ep->com.remote_addr; + + if ((status == 0) || (status == -ECONNREFUSED)) { + event.private_data_len = ep->plen; + event.private_data = ep->mpa_pkt + sizeof(struct mpa_message); + } + if (ep->com.cm_id) { + PDBG("%s ep %p tid %d status %d\n", __FUNCTION__, ep, + ep->hwtid, status); + ep->com.cm_id->event_handler(ep->com.cm_id, &event); + } + if (status < 0) { + ep->com.cm_id->rem_ref(ep->com.cm_id); + ep->com.cm_id = NULL; + ep->com.qp = NULL; + } +} + +static void connect_request_upcall(struct iwch_ep *ep) +{ + struct iw_cm_event event; + + PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, ep->hwtid); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_CONNECT_REQUEST; + event.local_addr = ep->com.local_addr; + event.remote_addr = ep->com.remote_addr; + event.private_data_len = ep->plen; + event.private_data = ep->mpa_pkt + sizeof(struct mpa_message); + event.provider_data = ep; + if (state_read(&ep->parent_ep->com) != DEAD) + ep->parent_ep->com.cm_id->event_handler( + ep->parent_ep->com.cm_id, + &event); + put_ep(&ep->parent_ep->com); + ep->parent_ep = NULL; +} + +static void established_upcall(struct iwch_ep *ep) +{ + struct iw_cm_event event; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + memset(&event, 0, sizeof(event)); + event.event = IW_CM_EVENT_ESTABLISHED; + if (ep->com.cm_id) { + PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, ep->hwtid); + ep->com.cm_id->event_handler(ep->com.cm_id, &event); + } +} + +static int update_rx_credits(struct iwch_ep *ep, u32 credits) +{ + struct cpl_rx_data_ack *req; + struct sk_buff *skb; + + PDBG("%s ep %p credits %u\n", __FUNCTION__, ep, credits); + skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "update_rx_credits - cannot alloc skb!\n"); + return 0; + } + + req = (struct cpl_rx_data_ack *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RX_DATA_ACK, ep->hwtid)); + req->credit_dack = htonl(V_RX_CREDITS(credits) | V_RX_FORCE_ACK(1)); + skb->priority = CPL_PRIORITY_ACK; + ep->com.tdev->send(ep->com.tdev, skb); + return credits; +} + +static void process_mpa_reply(struct iwch_ep *ep, struct sk_buff *skb) +{ + struct mpa_message *mpa; + u16 plen; + struct iwch_qp_attributes attrs; + enum iwch_qp_attr_mask mask; + int err; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + + /* + * Stop mpa timer. If it expired, then the state has + * changed and we bail since ep_timeout already aborted + * the connection. + */ + stop_ep_timer(ep); + if (state_read(&ep->com) != MPA_REQ_SENT) + return; + + /* + * If we get more than the supported amount of private data + * then we must fail this connection. + */ + if (ep->mpa_pkt_len + skb->len > sizeof(ep->mpa_pkt)) { + err = -EINVAL; + goto err; + } + + /* + * copy the new data into our accumulation buffer. + */ + memcpy(&(ep->mpa_pkt[ep->mpa_pkt_len]), skb->data, skb->len); + ep->mpa_pkt_len += skb->len; + + /* + * if we don't even have the mpa message, then bail. + */ + if (ep->mpa_pkt_len < sizeof(*mpa)) + return; + mpa = (struct mpa_message *) ep->mpa_pkt; + + /* Validate MPA header. */ + if (mpa->revision != mpa_rev) { + err = -EPROTO; + goto err; + } + if (memcmp(mpa->key, MPA_KEY_REP, sizeof(mpa->key))) { + err = -EPROTO; + goto err; + } + + plen = ntohs(mpa->private_data_size); + + /* + * Fail if there's too much private data. + */ + if (plen > MPA_MAX_PRIVATE_DATA) { + err = -EPROTO; + goto err; + } + + /* + * If plen does not account for pkt size + */ + if (ep->mpa_pkt_len > (sizeof(*mpa) + plen)) { + err = -EPROTO; + goto err; + } + + ep->plen = (u8) plen; + + /* + * If we don't have all the pdata yet, then bail. + * We'll continue process when more data arrives. + */ + if (ep->mpa_pkt_len < (sizeof(*mpa) + plen)) + return; + + if (mpa->flags & MPA_REJECT) { + err = -ECONNREFUSED; + goto err; + } + + /* + * If we get here we have accumulated the entire mpa + * start reply message including private data. And + * the MPA header is valid. + */ + state_set(&ep->com, FPDU_MODE); + ep->mpa_attr.crc_enabled = (mpa->flags & MPA_CRC) | crc_enabled ? 1 : 0; + ep->mpa_attr.recv_marker_enabled = markers_enabled; + ep->mpa_attr.xmit_marker_enabled = mpa->flags & MPA_MARKERS ? 1 : 0; + ep->mpa_attr.version = mpa_rev; + PDBG("%s - crc_enabled=%d, recv_marker_enabled=%d, " + "xmit_marker_enabled=%d, version=%d\n", __FUNCTION__, + ep->mpa_attr.crc_enabled, ep->mpa_attr.recv_marker_enabled, + ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version); + + attrs.mpa_attr = ep->mpa_attr; + attrs.max_ird = ep->ird; + attrs.max_ord = ep->ord; + attrs.llp_stream_handle = ep; + attrs.next_state = IWCH_QP_STATE_RTS; + + mask = IWCH_QP_ATTR_NEXT_STATE | + IWCH_QP_ATTR_LLP_STREAM_HANDLE | IWCH_QP_ATTR_MPA_ATTR | + IWCH_QP_ATTR_MAX_IRD | IWCH_QP_ATTR_MAX_ORD; + + /* bind QP and TID with INIT_WR */ + err = iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, mask, &attrs, 1); + if (!err) + goto out; +err: + abort_connection(ep, skb, GFP_KERNEL); +out: + connect_reply_upcall(ep, err); + return; +} + +static void process_mpa_request(struct iwch_ep *ep, struct sk_buff *skb) +{ + struct mpa_message *mpa; + u16 plen; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + + /* + * Stop mpa timer. If it expired, then the state has + * changed and we bail since ep_timeout already aborted + * the connection. + */ + stop_ep_timer(ep); + if (state_read(&ep->com) != MPA_REQ_WAIT) + return; + + /* + * If we get more than the supported amount of private data + * then we must fail this connection. + */ + if (ep->mpa_pkt_len + skb->len > sizeof(ep->mpa_pkt)) { + abort_connection(ep, skb, GFP_KERNEL); + return; + } + + PDBG("%s enter (%s line %u)\n", __FUNCTION__, __FILE__, __LINE__); + + /* + * Copy the new data into our accumulation buffer. + */ + memcpy(&(ep->mpa_pkt[ep->mpa_pkt_len]), skb->data, skb->len); + ep->mpa_pkt_len += skb->len; + + /* + * If we don't even have the mpa message, then bail. + * We'll continue process when more data arrives. + */ + if (ep->mpa_pkt_len < sizeof(*mpa)) + return; + PDBG("%s enter (%s line %u)\n", __FUNCTION__, __FILE__, __LINE__); + mpa = (struct mpa_message *) ep->mpa_pkt; + + /* + * Validate MPA Header. + */ + if (mpa->revision != mpa_rev) { + abort_connection(ep, skb, GFP_KERNEL); + return; + } + + if (memcmp(mpa->key, MPA_KEY_REQ, sizeof(mpa->key))) { + abort_connection(ep, skb, GFP_KERNEL); + return; + } + + plen = ntohs(mpa->private_data_size); + + /* + * Fail if there's too much private data. + */ + if (plen > MPA_MAX_PRIVATE_DATA) { + abort_connection(ep, skb, GFP_KERNEL); + return; + } + + /* + * If plen does not account for pkt size + */ + if (ep->mpa_pkt_len > (sizeof(*mpa) + plen)) { + abort_connection(ep, skb, GFP_KERNEL); + return; + } + ep->plen = (u8) plen; + + /* + * If we don't have all the pdata yet, then bail. + */ + if (ep->mpa_pkt_len < (sizeof(*mpa) + plen)) + return; + + /* + * If we get here we have accumulated the entire mpa + * start reply message including private data. + */ + ep->mpa_attr.crc_enabled = (mpa->flags & MPA_CRC) | crc_enabled ? 1 : 0; + ep->mpa_attr.recv_marker_enabled = markers_enabled; + ep->mpa_attr.xmit_marker_enabled = mpa->flags & MPA_MARKERS ? 1 : 0; + ep->mpa_attr.version = mpa_rev; + PDBG("%s - crc_enabled=%d, recv_marker_enabled=%d, " + "xmit_marker_enabled=%d, version=%d\n", __FUNCTION__, + ep->mpa_attr.crc_enabled, ep->mpa_attr.recv_marker_enabled, + ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version); + + state_set(&ep->com, MPA_REQ_RCVD); + + /* drive upcall */ + connect_request_upcall(ep); + return; +} + +static int rx_data(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct cpl_rx_data *hdr = cplhdr(skb); + unsigned int dlen = ntohs(hdr->len); + + PDBG("%s ep %p dlen %u\n", __FUNCTION__, ep, dlen); + + skb_pull(skb, sizeof(*hdr)); + skb_trim(skb, dlen); + + switch (state_read(&ep->com)) { + case MPA_REQ_SENT: + process_mpa_reply(ep, skb); + break; + case MPA_REQ_WAIT: + process_mpa_request(ep, skb); + break; + case MPA_REP_SENT: + break; + default: + printk(KERN_ERR MOD "%s Unexpected streaming data." + " ep %p state %d tid %d\n", + __FUNCTION__, ep, state_read(&ep->com), ep->hwtid); + + /* + * The ep will timeout and inform the ULP of the failure. + * See ep_timeout(). + */ + break; + } + + /* update RX credits */ + update_rx_credits(ep, dlen); + + return CPL_RET_BUF_DONE; +} + +/* + * Upcall from the adapter indicating data has been transmitted. + * For us its just the single MPA request or reply. We can now free + * the skb holding the mpa message. + */ +static int tx_ack(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct cpl_wr_ack *hdr = cplhdr(skb); + unsigned int credits = ntohs(hdr->credits); + enum iwch_qp_attr_mask mask; + + PDBG("%s ep %p credits %u\n", __FUNCTION__, ep, credits); + + if (credits == 0) + return CPL_RET_BUF_DONE; + BUG_ON(credits != 1); + BUG_ON(ep->mpa_skb == NULL); + kfree_skb(ep->mpa_skb); + ep->mpa_skb = NULL; + dst_confirm(ep->dst); + if (state_read(&ep->com) == MPA_REP_SENT) { + struct iwch_qp_attributes attrs; + + /* bind QP to EP and move to RTS */ + attrs.mpa_attr = ep->mpa_attr; + attrs.max_ird = ep->ord; + attrs.max_ord = ep->ord; + attrs.llp_stream_handle = ep; + attrs.next_state = IWCH_QP_STATE_RTS; + + /* bind QP and TID with INIT_WR */ + mask = IWCH_QP_ATTR_NEXT_STATE | + IWCH_QP_ATTR_LLP_STREAM_HANDLE | + IWCH_QP_ATTR_MPA_ATTR | + IWCH_QP_ATTR_MAX_IRD | + IWCH_QP_ATTR_MAX_ORD; + + ep->com.rpl_err = iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, mask, &attrs, 1); + + if (!ep->com.rpl_err) { + state_set(&ep->com, FPDU_MODE); + established_upcall(ep); + } + + ep->com.rpl_done = 1; + PDBG("waking up ep %p\n", ep); + wake_up(&ep->com.waitq); + } + return CPL_RET_BUF_DONE; +} + +static int abort_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + + close_complete_upcall(ep); + state_set(&ep->com, DEAD); + release_ep_resources(ep); + return CPL_RET_BUF_DONE; +} + +static int act_open_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct cpl_act_open_rpl *rpl = cplhdr(skb); + + PDBG("%s ep %p status %u errno %d\n", __FUNCTION__, ep, rpl->status, + status2errno(rpl->status)); + connect_reply_upcall(ep, status2errno(rpl->status)); + state_set(&ep->com, DEAD); + if (ep->com.tdev->type == T3B) + release_tid(ep->com.tdev, GET_TID(rpl), NULL); + cxgb3_free_atid(ep->com.tdev, ep->atid); + dst_release(ep->dst); + l2t_release(L2DATA(ep->com.tdev), ep->l2t); + put_ep(&ep->com); + return CPL_RET_BUF_DONE; +} + +static int listen_start(struct iwch_listen_ep *ep) +{ + struct sk_buff *skb; + struct cpl_pass_open_req *req; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "t3c_listen_start failed to alloc skb!\n"); + return -ENOMEM; + } + + req = (struct cpl_pass_open_req *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_PASS_OPEN_REQ, ep->stid)); + req->local_port = ep->com.local_addr.sin_port; + req->local_ip = ep->com.local_addr.sin_addr.s_addr; + req->peer_port = 0; + req->peer_ip = 0; + req->peer_netmask = 0; + req->opt0h = htonl(F_DELACK | F_TCAM_BYPASS); + req->opt0l = htonl(V_RCV_BUFSIZ(rcv_win>>10)); + req->opt1 = htonl(V_CONN_POLICY(CPL_CONN_POLICY_ASK)); + + skb->priority = 1; + ep->com.tdev->send(ep->com.tdev, skb); + return 0; +} + +static int pass_open_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_listen_ep *ep = ctx; + struct cpl_pass_open_rpl *rpl = cplhdr(skb); + + PDBG("%s ep %p status %d error %d\n", __FUNCTION__, ep, + rpl->status, status2errno(rpl->status)); + ep->com.rpl_err = status2errno(rpl->status); + ep->com.rpl_done = 1; + wake_up(&ep->com.waitq); + + return CPL_RET_BUF_DONE; +} + +static int listen_stop(struct iwch_listen_ep *ep) +{ + struct sk_buff *skb; + struct cpl_close_listserv_req *req; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + skb = get_skb(NULL, sizeof(*req), GFP_KERNEL); + if (!skb) { + printk(KERN_ERR MOD "%s - failed to alloc skb\n", __FUNCTION__); + return -ENOMEM; + } + req = (struct cpl_close_listserv_req *) skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_LISTSRV_REQ, ep->stid)); + skb->priority = 1; + ep->com.tdev->send(ep->com.tdev, skb); + return 0; +} + +static int close_listsrv_rpl(struct t3cdev *tdev, struct sk_buff *skb, + void *ctx) +{ + struct iwch_listen_ep *ep = ctx; + struct cpl_close_listserv_rpl *rpl = cplhdr(skb); + + PDBG("%s ep %p\n", __FUNCTION__, ep); + ep->com.rpl_err = status2errno(rpl->status); + ep->com.rpl_done = 1; + wake_up(&ep->com.waitq); + return CPL_RET_BUF_DONE; +} + +static void accept_cr(struct iwch_ep *ep, __be32 peer_ip, struct sk_buff *skb) +{ + struct cpl_pass_accept_rpl *rpl; + unsigned int mtu_idx; + u32 opt0h, opt0l, opt2; + int wscale; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + BUG_ON(skb_cloned(skb)); + skb_trim(skb, sizeof(*rpl)); + skb_get(skb); + mtu_idx = find_best_mtu(T3C_DATA(ep->com.tdev), dst_mtu(ep->dst)); + wscale = compute_wscale(rcv_win); + opt0h = V_NAGLE(0) | + V_NO_CONG(nocong) | + V_KEEP_ALIVE(1) | + F_TCAM_BYPASS | + V_WND_SCALE(wscale) | + V_MSS_IDX(mtu_idx) | + V_L2T_IDX(ep->l2t->idx) | V_TX_CHANNEL(ep->l2t->smt_idx); + opt0l = V_TOS((ep->tos >> 2) & M_TOS) | V_RCV_BUFSIZ(rcv_win>>10); + opt2 = V_FLAVORS_VALID(1) | V_CONG_CONTROL_FLAVOR(cong_flavor); + + rpl = cplhdr(skb); + rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_PASS_ACCEPT_RPL, ep->hwtid)); + rpl->peer_ip = peer_ip; + rpl->opt0h = htonl(opt0h); + rpl->opt0l_status = htonl(opt0l | CPL_PASS_OPEN_ACCEPT); + rpl->opt2 = htonl(opt2); + rpl->rsvd = rpl->opt2; /* workaround for HW bug */ + skb->priority = CPL_PRIORITY_SETUP; + l2t_send(ep->com.tdev, skb, ep->l2t); + + return; +} + +static void reject_cr(struct t3cdev *tdev, u32 hwtid, __be32 peer_ip, + struct sk_buff *skb) +{ + PDBG("%s t3cdev %p tid %u peer_ip %x\n", __FUNCTION__, tdev, hwtid, + peer_ip); + BUG_ON(skb_cloned(skb)); + skb_trim(skb, sizeof(struct cpl_tid_release)); + skb_get(skb); + + if (tdev->type == T3B) + release_tid(tdev, hwtid, skb); + else { + struct cpl_pass_accept_rpl *rpl; + + rpl = cplhdr(skb); + skb->priority = CPL_PRIORITY_SETUP; + rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_PASS_ACCEPT_RPL, + hwtid)); + rpl->peer_ip = peer_ip; + rpl->opt0h = htonl(F_TCAM_BYPASS); + rpl->opt0l_status = htonl(CPL_PASS_OPEN_REJECT); + rpl->opt2 = 0; + rpl->rsvd = rpl->opt2; + tdev->send(tdev, skb); + } +} + +static int pass_accept_req(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *child_ep, *parent_ep = ctx; + struct cpl_pass_accept_req *req = cplhdr(skb); + unsigned int hwtid = GET_TID(req); + struct dst_entry *dst; + struct l2t_entry *l2t; + struct rtable *rt; + struct iff_mac tim; + + PDBG("%s parent ep %p tid %u\n", __FUNCTION__, parent_ep, hwtid); + + if (state_read(&parent_ep->com) != LISTEN) { + printk(KERN_ERR "%s - listening ep not in LISTEN\n", + __FUNCTION__); + goto reject; + } + + /* + * Find the netdev for this connection request. + */ + tim.mac_addr = req->dst_mac; + tim.vlan_tag = ntohs(req->vlan_tag); + if (tdev->ctl(tdev, GET_IFF_FROM_MAC, &tim) < 0 || !tim.dev) { + printk(KERN_ERR + "%s bad dst mac %02x %02x %02x %02x %02x %02x\n", + __FUNCTION__, + req->dst_mac[0], + req->dst_mac[1], + req->dst_mac[2], + req->dst_mac[3], + req->dst_mac[4], + req->dst_mac[5]); + goto reject; + } + + /* Find output route */ + rt = find_route(tdev, + req->local_ip, + req->peer_ip, + req->local_port, + req->peer_port, G_PASS_OPEN_TOS(ntohl(req->tos_tid))); + if (!rt) { + printk(KERN_ERR MOD "%s - failed to find dst entry!\n", + __FUNCTION__); + goto reject; + } + dst = &rt->u.dst; + l2t = t3_l2t_get(tdev, dst->neighbour, dst->neighbour->dev); + if (!l2t) { + printk(KERN_ERR MOD "%s - failed to allocate l2t entry!\n", + __FUNCTION__); + dst_release(dst); + goto reject; + } + child_ep = alloc_ep(sizeof(*child_ep), GFP_KERNEL); + if (!child_ep) { + printk(KERN_ERR MOD "%s - failed to allocate ep entry!\n", + __FUNCTION__); + l2t_release(L2DATA(tdev), l2t); + dst_release(dst); + goto reject; + } + state_set(&child_ep->com, CONNECTING); + child_ep->com.tdev = tdev; + child_ep->com.cm_id = NULL; + child_ep->com.local_addr.sin_family = PF_INET; + child_ep->com.local_addr.sin_port = req->local_port; + child_ep->com.local_addr.sin_addr.s_addr = req->local_ip; + child_ep->com.remote_addr.sin_family = PF_INET; + child_ep->com.remote_addr.sin_port = req->peer_port; + child_ep->com.remote_addr.sin_addr.s_addr = req->peer_ip; + get_ep(&parent_ep->com); + child_ep->parent_ep = parent_ep; + child_ep->tos = G_PASS_OPEN_TOS(ntohl(req->tos_tid)); + child_ep->l2t = l2t; + child_ep->dst = dst; + child_ep->hwtid = hwtid; + init_timer(&child_ep->timer); + cxgb3_insert_tid(tdev, &t3c_client, child_ep, hwtid); + accept_cr(child_ep, req->peer_ip, skb); + goto out; +reject: + reject_cr(tdev, hwtid, req->peer_ip, skb); +out: + return CPL_RET_BUF_DONE; +} + +static int pass_establish(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct cpl_pass_establish *req = cplhdr(skb); + + PDBG("%s ep %p\n", __FUNCTION__, ep); + ep->snd_seq = ntohl(req->snd_isn); + + set_emss(ep, ntohs(req->tcp_opt)); + + dst_confirm(ep->dst); + state_set(&ep->com, MPA_REQ_WAIT); + start_ep_timer(ep); + + return CPL_RET_BUF_DONE; +} + +static int peer_close(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct iwch_qp_attributes attrs; + unsigned long flags; + int disconnect = 1; + int release = 0; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + dst_confirm(ep->dst); + + spin_lock_irqsave(&ep->com.lock, flags); + switch (ep->com.state) { + case MPA_REQ_WAIT: + __state_set(&ep->com, CLOSING); + break; + case MPA_REQ_SENT: + __state_set(&ep->com, CLOSING); + connect_reply_upcall(ep, -ECONNRESET); + break; + case MPA_REQ_RCVD: + + /* + * We're gonna mark this puppy DEAD, but keep + * the reference on it until the ULP accepts or + * rejects the CR. + */ + __state_set(&ep->com, CLOSING); + get_ep(&ep->com); + break; + case MPA_REP_SENT: + __state_set(&ep->com, CLOSING); + ep->com.rpl_done = 1; + ep->com.rpl_err = -ECONNRESET; + PDBG("waking up ep %p\n", ep); + wake_up(&ep->com.waitq); + break; + case FPDU_MODE: + __state_set(&ep->com, CLOSING); + attrs.next_state = IWCH_QP_STATE_CLOSING; + iwch_modify_qp(ep->com.qp->rhp, ep->com.qp, + IWCH_QP_ATTR_NEXT_STATE, &attrs, 1); + peer_close_upcall(ep); + break; + case ABORTING: + disconnect = 0; + break; + case CLOSING: + start_ep_timer(ep); + __state_set(&ep->com, MORIBUND); + disconnect = 0; + break; + case MORIBUND: + stop_ep_timer(ep); + if (ep->com.cm_id && ep->com.qp) { + attrs.next_state = IWCH_QP_STATE_IDLE; + iwch_modify_qp(ep->com.qp->rhp, ep->com.qp, + IWCH_QP_ATTR_NEXT_STATE, &attrs, 1); + } + close_complete_upcall(ep); + __state_set(&ep->com, DEAD); + release = 1; + disconnect = 0; + break; + case DEAD: + disconnect = 0; + break; + default: + BUG_ON(1); + } + spin_unlock_irqrestore(&ep->com.lock, flags); + if (disconnect) + iwch_ep_disconnect(ep, 0, GFP_KERNEL); + if (release) + release_ep_resources(ep); + return CPL_RET_BUF_DONE; +} + +/* + * Returns whether an ABORT_REQ_RSS message is a negative advice. + */ +static inline int is_neg_adv_abort(unsigned int status) +{ + return status == CPL_ERR_RTX_NEG_ADVICE || + status == CPL_ERR_PERSIST_NEG_ADVICE; +} + +static int peer_abort(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct cpl_abort_req_rss *req = cplhdr(skb); + struct iwch_ep *ep = ctx; + struct cpl_abort_rpl *rpl; + struct sk_buff *rpl_skb; + struct iwch_qp_attributes attrs; + int ret; + int state; + + if (is_neg_adv_abort(req->status)) { + PDBG("%s neg_adv_abort ep %p tid %d\n", __FUNCTION__, ep, + ep->hwtid); + t3_l2t_send_event(ep->com.tdev, ep->l2t); + return CPL_RET_BUF_DONE; + } + + state = state_read(&ep->com); + PDBG("%s ep %p state %u\n", __FUNCTION__, ep, state); + switch (state) { + case CONNECTING: + break; + case MPA_REQ_WAIT: + break; + case MPA_REQ_SENT: + connect_reply_upcall(ep, -ECONNRESET); + break; + case MPA_REP_SENT: + ep->com.rpl_done = 1; + ep->com.rpl_err = -ECONNRESET; + PDBG("waking up ep %p\n", ep); + wake_up(&ep->com.waitq); + break; + case MPA_REQ_RCVD: + + /* + * We're gonna mark this puppy DEAD, but keep + * the reference on it until the ULP accepts or + * rejects the CR. + */ + get_ep(&ep->com); + break; + case MORIBUND: + stop_ep_timer(ep); + case FPDU_MODE: + case CLOSING: + if (ep->com.cm_id && ep->com.qp) { + attrs.next_state = IWCH_QP_STATE_ERROR; + ret = iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, IWCH_QP_ATTR_NEXT_STATE, + &attrs, 1); + if (ret) + printk(KERN_ERR MOD + "%s - qp <- error failed!\n", + __FUNCTION__); + } + peer_abort_upcall(ep); + break; + case ABORTING: + break; + case DEAD: + PDBG("%s PEER_ABORT IN DEAD STATE!!!!\n", __FUNCTION__); + return CPL_RET_BUF_DONE; + default: + BUG_ON(1); + break; + } + dst_confirm(ep->dst); + + rpl_skb = get_skb(skb, sizeof(*rpl), GFP_KERNEL); + if (!rpl_skb) { + printk(KERN_ERR MOD "%s - cannot allocate skb!\n", + __FUNCTION__); + dst_release(ep->dst); + l2t_release(L2DATA(ep->com.tdev), ep->l2t); + put_ep(&ep->com); + return CPL_RET_BUF_DONE; + } + rpl_skb->priority = CPL_PRIORITY_DATA; + rpl = (struct cpl_abort_rpl *) skb_put(rpl_skb, sizeof(*rpl)); + rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL)); + rpl->wr.wr_lo = htonl(V_WR_TID(ep->hwtid)); + OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_ABORT_RPL, ep->hwtid)); + rpl->cmd = CPL_ABORT_NO_RST; + ep->com.tdev->send(ep->com.tdev, rpl_skb); + if (state != ABORTING) { + state_set(&ep->com, DEAD); + release_ep_resources(ep); + } + return CPL_RET_BUF_DONE; +} + +static int close_con_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + struct iwch_qp_attributes attrs; + unsigned long flags; + int release = 0; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + BUG_ON(!ep); + + /* The cm_id may be null if we failed to connect */ + spin_lock_irqsave(&ep->com.lock, flags); + switch (ep->com.state) { + case CLOSING: + start_ep_timer(ep); + __state_set(&ep->com, MORIBUND); + break; + case MORIBUND: + stop_ep_timer(ep); + if ((ep->com.cm_id) && (ep->com.qp)) { + attrs.next_state = IWCH_QP_STATE_IDLE; + iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, + IWCH_QP_ATTR_NEXT_STATE, + &attrs, 1); + } + close_complete_upcall(ep); + __state_set(&ep->com, DEAD); + release = 1; + break; + case DEAD: + default: + BUG_ON(1); + break; + } + spin_unlock_irqrestore(&ep->com.lock, flags); + if (release) + release_ep_resources(ep); + return CPL_RET_BUF_DONE; +} + +/* + * T3A does 3 things when a TERM is received: + * 1) send up a CPL_RDMA_TERMINATE message with the TERM packet + * 2) generate an async event on the QP with the TERMINATE opcode + * 3) post a TERMINATE opcde cqe into the associated CQ. + * + * For (1), we save the message in the qp for later consumer consumption. + * For (2), we move the QP into TERMINATE, post a QP event and disconnect. + * For (3), we toss the CQE in cxio_poll_cq(). + * + * terminate() handles case (1)... + */ +static int terminate(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep *ep = ctx; + + PDBG("%s ep %p\n", __FUNCTION__, ep); + skb_pull(skb, sizeof(struct cpl_rdma_terminate)); + PDBG("%s saving %d bytes of term msg\n", __FUNCTION__, skb->len); + memcpy(ep->com.qp->attr.terminate_buffer, skb->data, skb->len); + ep->com.qp->attr.terminate_msg_len = skb->len; + ep->com.qp->attr.is_terminate_local = 0; + return CPL_RET_BUF_DONE; +} + +static int ec_status(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct cpl_rdma_ec_status *rep = cplhdr(skb); + struct iwch_ep *ep = ctx; + + PDBG("%s ep %p tid %u status %d\n", __FUNCTION__, ep, ep->hwtid, + rep->status); + if (rep->status) { + struct iwch_qp_attributes attrs; + + printk(KERN_ERR MOD "%s BAD CLOSE - Aborting tid %u\n", + __FUNCTION__, ep->hwtid); + attrs.next_state = IWCH_QP_STATE_ERROR; + iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, IWCH_QP_ATTR_NEXT_STATE, + &attrs, 1); + abort_connection(ep, NULL, GFP_KERNEL); + } + return CPL_RET_BUF_DONE; +} + +static void ep_timeout(unsigned long arg) +{ + struct iwch_ep *ep = (struct iwch_ep *)arg; + struct iwch_qp_attributes attrs; + unsigned long flags; + + spin_lock_irqsave(&ep->com.lock, flags); + PDBG("%s ep %p tid %u state %d\n", __FUNCTION__, ep, ep->hwtid, + ep->com.state); + switch (ep->com.state) { + case MPA_REQ_SENT: + connect_reply_upcall(ep, -ETIMEDOUT); + break; + case MPA_REQ_WAIT: + break; + case MORIBUND: + if (ep->com.cm_id && ep->com.qp) { + attrs.next_state = IWCH_QP_STATE_ERROR; + iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, IWCH_QP_ATTR_NEXT_STATE, + &attrs, 1); + } + break; + default: + BUG(); + } + __state_set(&ep->com, CLOSING); + spin_unlock_irqrestore(&ep->com.lock, flags); + abort_connection(ep, NULL, GFP_ATOMIC); + put_ep(&ep->com); +} + +int iwch_reject_cr(struct iw_cm_id *cm_id, const void *pdata, u8 pdata_len) +{ + int err; + struct iwch_ep *ep = to_ep(cm_id); + PDBG("%s ep %p tid %u\n", __FUNCTION__, ep, ep->hwtid); + + if (state_read(&ep->com) == DEAD) { + put_ep(&ep->com); + return -ECONNRESET; + } + BUG_ON(state_read(&ep->com) != MPA_REQ_RCVD); + state_set(&ep->com, CLOSING); + if (mpa_rev == 0) + abort_connection(ep, NULL, GFP_KERNEL); + else { + err = send_mpa_reject(ep, pdata, pdata_len); + err = send_halfclose(ep, GFP_KERNEL); + } + return 0; +} + +int iwch_accept_cr(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) +{ + int err; + struct iwch_qp_attributes attrs; + enum iwch_qp_attr_mask mask; + struct iwch_ep *ep = to_ep(cm_id); + struct iwch_dev *h = to_iwch_dev(cm_id->device); + struct iwch_qp *qp = get_qhp(h, conn_param->qpn); + + PDBG("%s ep %p tid %u\n", __FUNCTION__, ep, ep->hwtid); + if (state_read(&ep->com) == DEAD) { + put_ep(&ep->com); + return -ECONNRESET; + } + + BUG_ON(state_read(&ep->com) != MPA_REQ_RCVD); + BUG_ON(!qp); + + if ((conn_param->ord > qp->rhp->attr.max_rdma_read_qp_depth) || + (conn_param->ird > qp->rhp->attr.max_rdma_reads_per_qp)) { + abort_connection(ep, NULL, GFP_KERNEL); + return -EINVAL; + } + + cm_id->add_ref(cm_id); + ep->com.cm_id = cm_id; + ep->com.qp = qp; + + ep->com.rpl_done = 0; + ep->com.rpl_err = 0; + ep->ird = conn_param->ird; + ep->ord = conn_param->ord; + PDBG("%s %d ird %d ord %d\n", __FUNCTION__, __LINE__, ep->ird, ep->ord); + get_ep(&ep->com); + err = send_mpa_reply(ep, conn_param->private_data, + conn_param->private_data_len); + if (err) { + ep->com.cm_id = NULL; + ep->com.qp = NULL; + cm_id->rem_ref(cm_id); + abort_connection(ep, NULL, GFP_KERNEL); + put_ep(&ep->com); + return err; + } + + /* bind QP to EP and move to RTS */ + attrs.mpa_attr = ep->mpa_attr; + attrs.max_ird = ep->ord; + attrs.max_ord = ep->ord; + attrs.llp_stream_handle = ep; + attrs.next_state = IWCH_QP_STATE_RTS; + + /* bind QP and TID with INIT_WR */ + mask = IWCH_QP_ATTR_NEXT_STATE | + IWCH_QP_ATTR_LLP_STREAM_HANDLE | + IWCH_QP_ATTR_MPA_ATTR | + IWCH_QP_ATTR_MAX_IRD | + IWCH_QP_ATTR_MAX_ORD; + + err = iwch_modify_qp(ep->com.qp->rhp, + ep->com.qp, mask, &attrs, 1); + + if (err) { + ep->com.cm_id = NULL; + ep->com.qp = NULL; + cm_id->rem_ref(cm_id); + abort_connection(ep, NULL, GFP_KERNEL); + } else { + state_set(&ep->com, FPDU_MODE); + established_upcall(ep); + } + put_ep(&ep->com); + return err; +} + +int iwch_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) +{ + int err = 0; + struct iwch_dev *h = to_iwch_dev(cm_id->device); + struct iwch_ep *ep; + struct rtable *rt; + + ep = alloc_ep(sizeof(*ep), GFP_KERNEL); + if (!ep) { + printk(KERN_ERR MOD "%s - cannot alloc ep.\n", __FUNCTION__); + err = -ENOMEM; + goto out; + } + init_timer(&ep->timer); + ep->plen = conn_param->private_data_len; + if (ep->plen) + memcpy(ep->mpa_pkt + sizeof(struct mpa_message), + conn_param->private_data, ep->plen); + ep->ird = conn_param->ird; + ep->ord = conn_param->ord; + ep->com.tdev = h->rdev.t3cdev_p; + + cm_id->add_ref(cm_id); + ep->com.cm_id = cm_id; + ep->com.qp = get_qhp(h, conn_param->qpn); + BUG_ON(!ep->com.qp); + PDBG("%s qpn 0x%x qp %p cm_id %p\n", __FUNCTION__, conn_param->qpn, + ep->com.qp, cm_id); + + /* + * Allocate an active TID to initiate a TCP connection. + */ + ep->atid = cxgb3_alloc_atid(h->rdev.t3cdev_p, &t3c_client, ep); + if (ep->atid == -1) { + printk(KERN_ERR MOD "%s - cannot alloc atid.\n", __FUNCTION__); + err = -ENOMEM; + goto fail2; + } + + /* find a route */ + rt = find_route(h->rdev.t3cdev_p, + cm_id->local_addr.sin_addr.s_addr, + cm_id->remote_addr.sin_addr.s_addr, + cm_id->local_addr.sin_port, + cm_id->remote_addr.sin_port, IPTOS_LOWDELAY); + if (!rt) { + printk(KERN_ERR MOD "%s - cannot find route.\n", __FUNCTION__); + err = -EHOSTUNREACH; + goto fail3; + } + ep->dst = &rt->u.dst; + + /* get a l2t entry */ + ep->l2t = t3_l2t_get(ep->com.tdev, ep->dst->neighbour, + ep->dst->neighbour->dev); + if (!ep->l2t) { + printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __FUNCTION__); + err = -ENOMEM; + goto fail4; + } + + state_set(&ep->com, CONNECTING); + ep->tos = IPTOS_LOWDELAY; + ep->com.local_addr = cm_id->local_addr; + ep->com.remote_addr = cm_id->remote_addr; + + /* send connect request to rnic */ + err = send_connect(ep); + if (!err) + goto out; + + l2t_release(L2DATA(h->rdev.t3cdev_p), ep->l2t); +fail4: + dst_release(ep->dst); +fail3: + cxgb3_free_atid(ep->com.tdev, ep->atid); +fail2: + put_ep(&ep->com); +out: + return err; +} + +int iwch_create_listen(struct iw_cm_id *cm_id, int backlog) +{ + int err = 0; + struct iwch_dev *h = to_iwch_dev(cm_id->device); + struct iwch_listen_ep *ep; + + + might_sleep(); + + ep = alloc_ep(sizeof(*ep), GFP_KERNEL); + if (!ep) { + printk(KERN_ERR MOD "%s - cannot alloc ep.\n", __FUNCTION__); + err = -ENOMEM; + goto fail1; + } + PDBG("%s ep %p\n", __FUNCTION__, ep); + ep->com.tdev = h->rdev.t3cdev_p; + cm_id->add_ref(cm_id); + ep->com.cm_id = cm_id; + ep->backlog = backlog; + ep->com.local_addr = cm_id->local_addr; + + /* + * Allocate a server TID. + */ + ep->stid = cxgb3_alloc_stid(h->rdev.t3cdev_p, &t3c_client, ep); + if (ep->stid == -1) { + printk(KERN_ERR MOD "%s - cannot alloc atid.\n", __FUNCTION__); + err = -ENOMEM; + goto fail2; + } + + state_set(&ep->com, LISTEN); + err = listen_start(ep); + if (err) + goto fail3; + + /* wait for pass_open_rpl */ + wait_event(ep->com.waitq, ep->com.rpl_done); + err = ep->com.rpl_err; + if (!err) { + cm_id->provider_data = ep; + goto out; + } +fail3: + cxgb3_free_stid(ep->com.tdev, ep->stid); +fail2: + put_ep(&ep->com); +fail1: +out: + return err; +} + +int iwch_destroy_listen(struct iw_cm_id *cm_id) +{ + int err; + struct iwch_listen_ep *ep = to_listen_ep(cm_id); + + PDBG("%s ep %p\n", __FUNCTION__, ep); + + might_sleep(); + state_set(&ep->com, DEAD); + ep->com.rpl_done = 0; + ep->com.rpl_err = 0; + err = listen_stop(ep); + wait_event(ep->com.waitq, ep->com.rpl_done); + cxgb3_free_stid(ep->com.tdev, ep->stid); + err = ep->com.rpl_err; + cm_id->rem_ref(cm_id); + put_ep(&ep->com); + return err; +} + +int iwch_ep_disconnect(struct iwch_ep *ep, int abrupt, gfp_t gfp) +{ + int ret=0; + unsigned long flags; + int close = 0; + + spin_lock_irqsave(&ep->com.lock, flags); + + PDBG("%s ep %p state %s, abrupt %d\n", __FUNCTION__, ep, + states[ep->com.state], abrupt); + + if (ep->com.state == DEAD) { + PDBG("%s already dead ep %p\n", __FUNCTION__, ep); + goto out; + } + + if (abrupt) { + if (ep->com.state != ABORTING) { + ep->com.state = ABORTING; + close = 1; + } + goto out; + } + + switch (ep->com.state) { + case MPA_REQ_WAIT: + case MPA_REQ_SENT: + case MPA_REQ_RCVD: + case MPA_REP_SENT: + case FPDU_MODE: + ep->com.state = CLOSING; + close = 1; + break; + case CLOSING: + start_ep_timer(ep); + ep->com.state = MORIBUND; + close = 1; + break; + case MORIBUND: + break; + default: + BUG(); + break; + } +out: + spin_unlock_irqrestore(&ep->com.lock, flags); + if (close) { + if (abrupt) + ret = send_abort(ep, NULL, gfp); + else + ret = send_halfclose(ep, gfp); + } + return ret; +} + +int iwch_ep_redirect(void *ctx, struct dst_entry *old, struct dst_entry *new, + struct l2t_entry *l2t) +{ + struct iwch_ep *ep = ctx; + + if (ep->dst != old) + return 0; + + PDBG("%s ep %p redirect to dst %p l2t %p\n", __FUNCTION__, ep, new, + l2t); + dst_hold(new); + l2t_release(L2DATA(ep->com.tdev), ep->l2t); + ep->l2t = l2t; + dst_release(old); + ep->dst = new; + return 1; +} + +/* + * All the CM events are handled on a work queue to have a safe context. + */ +static int sched(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) +{ + struct iwch_ep_common *epc = ctx; + + get_ep(epc); + + /* + * Save ctx and tdev in the skb->cb area. + */ + *((void **) skb->cb) = ctx; + *((struct t3cdev **) (skb->cb + sizeof(void *))) = tdev; + + /* + * Queue the skb and schedule the worker thread. + */ + skb_queue_tail(&rxq, skb); + queue_work(workq, &skb_work); + return 0; +} + +int __init iwch_cm_init(void) +{ + skb_queue_head_init(&rxq); + + workq = create_singlethread_workqueue("iw_cxgb3"); + if (!workq) + return -ENOMEM; + + /* + * All upcalls from the T3 Core go to sched() to + * schedule the processing on a work queue. + */ + t3c_handlers[CPL_ACT_ESTABLISH] = sched; + t3c_handlers[CPL_ACT_OPEN_RPL] = sched; + t3c_handlers[CPL_RX_DATA] = sched; + t3c_handlers[CPL_TX_DMA_ACK] = sched; + t3c_handlers[CPL_ABORT_RPL_RSS] = sched; + t3c_handlers[CPL_ABORT_RPL] = sched; + t3c_handlers[CPL_PASS_OPEN_RPL] = sched; + t3c_handlers[CPL_CLOSE_LISTSRV_RPL] = sched; + t3c_handlers[CPL_PASS_ACCEPT_REQ] = sched; + t3c_handlers[CPL_PASS_ESTABLISH] = sched; + t3c_handlers[CPL_PEER_CLOSE] = sched; + t3c_handlers[CPL_CLOSE_CON_RPL] = sched; + t3c_handlers[CPL_ABORT_REQ_RSS] = sched; + t3c_handlers[CPL_RDMA_TERMINATE] = sched; + t3c_handlers[CPL_RDMA_EC_STATUS] = sched; + + /* + * These are the real handlers that are called from a + * work queue. + */ + work_handlers[CPL_ACT_ESTABLISH] = act_establish; + work_handlers[CPL_ACT_OPEN_RPL] = act_open_rpl; + work_handlers[CPL_RX_DATA] = rx_data; + work_handlers[CPL_TX_DMA_ACK] = tx_ack; + work_handlers[CPL_ABORT_RPL_RSS] = abort_rpl; + work_handlers[CPL_ABORT_RPL] = abort_rpl; + work_handlers[CPL_PASS_OPEN_RPL] = pass_open_rpl; + work_handlers[CPL_CLOSE_LISTSRV_RPL] = close_listsrv_rpl; + work_handlers[CPL_PASS_ACCEPT_REQ] = pass_accept_req; + work_handlers[CPL_PASS_ESTABLISH] = pass_establish; + work_handlers[CPL_PEER_CLOSE] = peer_close; + work_handlers[CPL_ABORT_REQ_RSS] = peer_abort; + work_handlers[CPL_CLOSE_CON_RPL] = close_con_rpl; + work_handlers[CPL_RDMA_TERMINATE] = terminate; + work_handlers[CPL_RDMA_EC_STATUS] = ec_status; + return 0; +} + +void __exit iwch_cm_term(void) +{ + flush_workqueue(workq); + destroy_workqueue(workq); +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.h b/drivers/infiniband/hw/cxgb3/iwch_cm.h new file mode 100644 index 000000000000..7c810d904279 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.h @@ -0,0 +1,223 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _IWCH_CM_H_ +#define _IWCH_CM_H_ + +#include +#include +#include +#include + +#include +#include + +#include "cxgb3_offload.h" +#include "iwch_provider.h" + +#define MPA_KEY_REQ "MPA ID Req Frame" +#define MPA_KEY_REP "MPA ID Rep Frame" + +#define MPA_MAX_PRIVATE_DATA 256 +#define MPA_REV 0 /* XXX - amso1100 uses rev 0 ! */ +#define MPA_REJECT 0x20 +#define MPA_CRC 0x40 +#define MPA_MARKERS 0x80 +#define MPA_FLAGS_MASK 0xE0 + +#define put_ep(ep) { \ + PDBG("put_ep (via %s:%u) ep %p refcnt %d\n", __FUNCTION__, __LINE__, \ + ep, atomic_read(&((ep)->kref.refcount))); \ + kref_put(&((ep)->kref), __free_ep); \ +} + +#define get_ep(ep) { \ + PDBG("get_ep (via %s:%u) ep %p, refcnt %d\n", __FUNCTION__, __LINE__, \ + ep, atomic_read(&((ep)->kref.refcount))); \ + kref_get(&((ep)->kref)); \ +} + +struct mpa_message { + u8 key[16]; + u8 flags; + u8 revision; + __be16 private_data_size; + u8 private_data[0]; +}; + +struct terminate_message { + u8 layer_etype; + u8 ecode; + __be16 hdrct_rsvd; + u8 len_hdrs[0]; +}; + +#define TERM_MAX_LENGTH (sizeof(struct terminate_message) + 2 + 18 + 28) + +enum iwch_layers_types { + LAYER_RDMAP = 0x00, + LAYER_DDP = 0x10, + LAYER_MPA = 0x20, + RDMAP_LOCAL_CATA = 0x00, + RDMAP_REMOTE_PROT = 0x01, + RDMAP_REMOTE_OP = 0x02, + DDP_LOCAL_CATA = 0x00, + DDP_TAGGED_ERR = 0x01, + DDP_UNTAGGED_ERR = 0x02, + DDP_LLP = 0x03 +}; + +enum iwch_rdma_ecodes { + RDMAP_INV_STAG = 0x00, + RDMAP_BASE_BOUNDS = 0x01, + RDMAP_ACC_VIOL = 0x02, + RDMAP_STAG_NOT_ASSOC = 0x03, + RDMAP_TO_WRAP = 0x04, + RDMAP_INV_VERS = 0x05, + RDMAP_INV_OPCODE = 0x06, + RDMAP_STREAM_CATA = 0x07, + RDMAP_GLOBAL_CATA = 0x08, + RDMAP_CANT_INV_STAG = 0x09, + RDMAP_UNSPECIFIED = 0xff +}; + +enum iwch_ddp_ecodes { + DDPT_INV_STAG = 0x00, + DDPT_BASE_BOUNDS = 0x01, + DDPT_STAG_NOT_ASSOC = 0x02, + DDPT_TO_WRAP = 0x03, + DDPT_INV_VERS = 0x04, + DDPU_INV_QN = 0x01, + DDPU_INV_MSN_NOBUF = 0x02, + DDPU_INV_MSN_RANGE = 0x03, + DDPU_INV_MO = 0x04, + DDPU_MSG_TOOBIG = 0x05, + DDPU_INV_VERS = 0x06 +}; + +enum iwch_mpa_ecodes { + MPA_CRC_ERR = 0x02, + MPA_MARKER_ERR = 0x03 +}; + +enum iwch_ep_state { + IDLE = 0, + LISTEN, + CONNECTING, + MPA_REQ_WAIT, + MPA_REQ_SENT, + MPA_REQ_RCVD, + MPA_REP_SENT, + FPDU_MODE, + ABORTING, + CLOSING, + MORIBUND, + DEAD, +}; + +struct iwch_ep_common { + struct iw_cm_id *cm_id; + struct iwch_qp *qp; + struct t3cdev *tdev; + enum iwch_ep_state state; + struct kref kref; + spinlock_t lock; + struct sockaddr_in local_addr; + struct sockaddr_in remote_addr; + wait_queue_head_t waitq; + int rpl_done; + int rpl_err; +}; + +struct iwch_listen_ep { + struct iwch_ep_common com; + unsigned int stid; + int backlog; +}; + +struct iwch_ep { + struct iwch_ep_common com; + struct iwch_ep *parent_ep; + struct timer_list timer; + unsigned int atid; + u32 hwtid; + u32 snd_seq; + struct l2t_entry *l2t; + struct dst_entry *dst; + struct sk_buff *mpa_skb; + struct iwch_mpa_attributes mpa_attr; + unsigned int mpa_pkt_len; + u8 mpa_pkt[sizeof(struct mpa_message) + MPA_MAX_PRIVATE_DATA]; + u8 tos; + u16 emss; + u16 plen; + u32 ird; + u32 ord; +}; + +static inline struct iwch_ep *to_ep(struct iw_cm_id *cm_id) +{ + return cm_id->provider_data; +} + +static inline struct iwch_listen_ep *to_listen_ep(struct iw_cm_id *cm_id) +{ + return cm_id->provider_data; +} + +static inline int compute_wscale(int win) +{ + int wscale = 0; + + while (wscale < 14 && (65535<cq); + + if (!rd_cqe) + return 0; + + qhp = get_qhp(rhp, CQE_QPID(*rd_cqe)); + if (!qhp) + wq = NULL; + else { + spin_lock(&qhp->lock); + wq = &(qhp->wq); + } + ret = cxio_poll_cq(wq, &(chp->cq), &cqe, &cqe_flushed, &cookie, + &credit); + if (t3a_device(chp->rhp) && credit) { + PDBG("%s updating %d cq credits on id %d\n", __FUNCTION__, + credit, chp->cq.cqid); + cxio_hal_cq_op(&rhp->rdev, &chp->cq, CQ_CREDIT_UPDATE, credit); + } + + if (ret) { + ret = -EAGAIN; + goto out; + } + ret = 1; + + wc->wr_id = cookie; + wc->qp = &qhp->ibqp; + wc->vendor_err = CQE_STATUS(cqe); + + PDBG("%s qpid 0x%x type %d opcode %d status 0x%x wrid hi 0x%x " + "lo 0x%x cookie 0x%llx\n", __FUNCTION__, + CQE_QPID(cqe), CQE_TYPE(cqe), + CQE_OPCODE(cqe), CQE_STATUS(cqe), CQE_WRID_HI(cqe), + CQE_WRID_LOW(cqe), (unsigned long long) cookie); + + if (CQE_TYPE(cqe) == 0) { + if (!CQE_STATUS(cqe)) + wc->byte_len = CQE_LEN(cqe); + else + wc->byte_len = 0; + wc->opcode = IB_WC_RECV; + } else { + switch (CQE_OPCODE(cqe)) { + case T3_RDMA_WRITE: + wc->opcode = IB_WC_RDMA_WRITE; + break; + case T3_READ_REQ: + wc->opcode = IB_WC_RDMA_READ; + wc->byte_len = CQE_LEN(cqe); + break; + case T3_SEND: + case T3_SEND_WITH_SE: + wc->opcode = IB_WC_SEND; + break; + case T3_BIND_MW: + wc->opcode = IB_WC_BIND_MW; + break; + + /* these aren't supported yet */ + case T3_SEND_WITH_INV: + case T3_SEND_WITH_SE_INV: + case T3_LOCAL_INV: + case T3_FAST_REGISTER: + default: + printk(KERN_ERR MOD "Unexpected opcode %d " + "in the CQE received for QPID=0x%0x\n", + CQE_OPCODE(cqe), CQE_QPID(cqe)); + ret = -EINVAL; + goto out; + } + } + + if (cqe_flushed) + wc->status = IB_WC_WR_FLUSH_ERR; + else { + + switch (CQE_STATUS(cqe)) { + case TPT_ERR_SUCCESS: + wc->status = IB_WC_SUCCESS; + break; + case TPT_ERR_STAG: + wc->status = IB_WC_LOC_ACCESS_ERR; + break; + case TPT_ERR_PDID: + wc->status = IB_WC_LOC_PROT_ERR; + break; + case TPT_ERR_QPID: + case TPT_ERR_ACCESS: + wc->status = IB_WC_LOC_ACCESS_ERR; + break; + case TPT_ERR_WRAP: + wc->status = IB_WC_GENERAL_ERR; + break; + case TPT_ERR_BOUND: + wc->status = IB_WC_LOC_LEN_ERR; + break; + case TPT_ERR_INVALIDATE_SHARED_MR: + case TPT_ERR_INVALIDATE_MR_WITH_MW_BOUND: + wc->status = IB_WC_MW_BIND_ERR; + break; + case TPT_ERR_CRC: + case TPT_ERR_MARKER: + case TPT_ERR_PDU_LEN_ERR: + case TPT_ERR_OUT_OF_RQE: + case TPT_ERR_DDP_VERSION: + case TPT_ERR_RDMA_VERSION: + case TPT_ERR_DDP_QUEUE_NUM: + case TPT_ERR_MSN: + case TPT_ERR_TBIT: + case TPT_ERR_MO: + case TPT_ERR_MSN_RANGE: + case TPT_ERR_IRD_OVERFLOW: + case TPT_ERR_OPCODE: + wc->status = IB_WC_FATAL_ERR; + break; + case TPT_ERR_SWFLUSH: + wc->status = IB_WC_WR_FLUSH_ERR; + break; + default: + printk(KERN_ERR MOD "Unexpected cqe_status 0x%x for " + "QPID=0x%0x\n", CQE_STATUS(cqe), CQE_QPID(cqe)); + ret = -EINVAL; + } + } +out: + if (wq) + spin_unlock(&qhp->lock); + return ret; +} + +int iwch_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc) +{ + struct iwch_dev *rhp; + struct iwch_cq *chp; + unsigned long flags; + int npolled; + int err = 0; + + chp = to_iwch_cq(ibcq); + rhp = chp->rhp; + + spin_lock_irqsave(&chp->lock, flags); + for (npolled = 0; npolled < num_entries; ++npolled) { +#ifdef DEBUG + int i=0; +#endif + + /* + * Because T3 can post CQEs that are _not_ associated + * with a WR, we might have to poll again after removing + * one of these. + */ + do { + err = iwch_poll_cq_one(rhp, chp, wc + npolled); +#ifdef DEBUG + BUG_ON(++i > 1000); +#endif + } while (err == -EAGAIN); + if (err <= 0) + break; + } + spin_unlock_irqrestore(&chp->lock, flags); + + if (err < 0) + return err; + else { + return npolled; + } +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_ev.c b/drivers/infiniband/hw/cxgb3/iwch_ev.c new file mode 100644 index 000000000000..a6efa8fe15d8 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_ev.c @@ -0,0 +1,231 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include "iwch_provider.h" +#include "iwch.h" +#include "iwch_cm.h" +#include "cxio_hal.h" +#include "cxio_wr.h" + +static void post_qp_event(struct iwch_dev *rnicp, struct iwch_cq *chp, + struct respQ_msg_t *rsp_msg, + enum ib_event_type ib_event, + int send_term) +{ + struct ib_event event; + struct iwch_qp_attributes attrs; + struct iwch_qp *qhp; + + printk(KERN_ERR "%s - AE qpid 0x%x opcode %d status 0x%x " + "type %d wrid.hi 0x%x wrid.lo 0x%x \n", __FUNCTION__, + CQE_QPID(rsp_msg->cqe), CQE_OPCODE(rsp_msg->cqe), + CQE_STATUS(rsp_msg->cqe), CQE_TYPE(rsp_msg->cqe), + CQE_WRID_HI(rsp_msg->cqe), CQE_WRID_LOW(rsp_msg->cqe)); + + spin_lock(&rnicp->lock); + qhp = get_qhp(rnicp, CQE_QPID(rsp_msg->cqe)); + + if (!qhp) { + printk(KERN_ERR "%s unaffiliated error 0x%x qpid 0x%x\n", + __FUNCTION__, CQE_STATUS(rsp_msg->cqe), + CQE_QPID(rsp_msg->cqe)); + spin_unlock(&rnicp->lock); + return; + } + + if ((qhp->attr.state == IWCH_QP_STATE_ERROR) || + (qhp->attr.state == IWCH_QP_STATE_TERMINATE)) { + PDBG("%s AE received after RTS - " + "qp state %d qpid 0x%x status 0x%x\n", __FUNCTION__, + qhp->attr.state, qhp->wq.qpid, CQE_STATUS(rsp_msg->cqe)); + spin_unlock(&rnicp->lock); + return; + } + + atomic_inc(&qhp->refcnt); + spin_unlock(&rnicp->lock); + + event.event = ib_event; + event.device = chp->ibcq.device; + if (ib_event == IB_EVENT_CQ_ERR) + event.element.cq = &chp->ibcq; + else + event.element.qp = &qhp->ibqp; + + if (qhp->ibqp.event_handler) + (*qhp->ibqp.event_handler)(&event, qhp->ibqp.qp_context); + + if (qhp->attr.state == IWCH_QP_STATE_RTS) { + attrs.next_state = IWCH_QP_STATE_TERMINATE; + iwch_modify_qp(qhp->rhp, qhp, IWCH_QP_ATTR_NEXT_STATE, + &attrs, 1); + if (send_term) + iwch_post_terminate(qhp, rsp_msg); + } + + if (atomic_dec_and_test(&qhp->refcnt)) + wake_up(&qhp->wait); +} + +void iwch_ev_dispatch(struct cxio_rdev *rdev_p, struct sk_buff *skb) +{ + struct iwch_dev *rnicp; + struct respQ_msg_t *rsp_msg = (struct respQ_msg_t *) skb->data; + struct iwch_cq *chp; + struct iwch_qp *qhp; + u32 cqid = RSPQ_CQID(rsp_msg); + + rnicp = (struct iwch_dev *) rdev_p->ulp; + spin_lock(&rnicp->lock); + chp = get_chp(rnicp, cqid); + qhp = get_qhp(rnicp, CQE_QPID(rsp_msg->cqe)); + if (!chp || !qhp) { + printk(KERN_ERR MOD "BAD AE cqid 0x%x qpid 0x%x opcode %d " + "status 0x%x type %d wrid.hi 0x%x wrid.lo 0x%x \n", + cqid, CQE_QPID(rsp_msg->cqe), + CQE_OPCODE(rsp_msg->cqe), CQE_STATUS(rsp_msg->cqe), + CQE_TYPE(rsp_msg->cqe), CQE_WRID_HI(rsp_msg->cqe), + CQE_WRID_LOW(rsp_msg->cqe)); + spin_unlock(&rnicp->lock); + goto out; + } + iwch_qp_add_ref(&qhp->ibqp); + atomic_inc(&chp->refcnt); + spin_unlock(&rnicp->lock); + + /* + * 1) completion of our sending a TERMINATE. + * 2) incoming TERMINATE message. + */ + if ((CQE_OPCODE(rsp_msg->cqe) == T3_TERMINATE) && + (CQE_STATUS(rsp_msg->cqe) == 0)) { + if (SQ_TYPE(rsp_msg->cqe)) { + PDBG("%s QPID 0x%x ep %p disconnecting\n", + __FUNCTION__, qhp->wq.qpid, qhp->ep); + iwch_ep_disconnect(qhp->ep, 0, GFP_ATOMIC); + } else { + PDBG("%s post REQ_ERR AE QPID 0x%x\n", __FUNCTION__, + qhp->wq.qpid); + post_qp_event(rnicp, chp, rsp_msg, + IB_EVENT_QP_REQ_ERR, 0); + iwch_ep_disconnect(qhp->ep, 0, GFP_ATOMIC); + } + goto done; + } + + /* Bad incoming Read request */ + if (SQ_TYPE(rsp_msg->cqe) && + (CQE_OPCODE(rsp_msg->cqe) == T3_READ_RESP)) { + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_QP_REQ_ERR, 1); + goto done; + } + + /* Bad incoming write */ + if (RQ_TYPE(rsp_msg->cqe) && + (CQE_OPCODE(rsp_msg->cqe) == T3_RDMA_WRITE)) { + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_QP_REQ_ERR, 1); + goto done; + } + + switch (CQE_STATUS(rsp_msg->cqe)) { + + /* Completion Events */ + case TPT_ERR_SUCCESS: + + /* + * Confirm the destination entry if this is a RECV completion. + */ + if (qhp->ep && SQ_TYPE(rsp_msg->cqe)) + dst_confirm(qhp->ep->dst); + (*chp->ibcq.comp_handler)(&chp->ibcq, chp->ibcq.cq_context); + break; + + case TPT_ERR_STAG: + case TPT_ERR_PDID: + case TPT_ERR_QPID: + case TPT_ERR_ACCESS: + case TPT_ERR_WRAP: + case TPT_ERR_BOUND: + case TPT_ERR_INVALIDATE_SHARED_MR: + case TPT_ERR_INVALIDATE_MR_WITH_MW_BOUND: + printk(KERN_ERR "%s - CQE Err qpid 0x%x opcode %d status 0x%x " + "type %d wrid.hi 0x%x wrid.lo 0x%x \n", __FUNCTION__, + CQE_QPID(rsp_msg->cqe), CQE_OPCODE(rsp_msg->cqe), + CQE_STATUS(rsp_msg->cqe), CQE_TYPE(rsp_msg->cqe), + CQE_WRID_HI(rsp_msg->cqe), CQE_WRID_LOW(rsp_msg->cqe)); + (*chp->ibcq.comp_handler)(&chp->ibcq, chp->ibcq.cq_context); + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_QP_ACCESS_ERR, 1); + break; + + /* Device Fatal Errors */ + case TPT_ERR_ECC: + case TPT_ERR_ECC_PSTAG: + case TPT_ERR_INTERNAL_ERR: + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_DEVICE_FATAL, 1); + break; + + /* QP Fatal Errors */ + case TPT_ERR_OUT_OF_RQE: + case TPT_ERR_PBL_ADDR_BOUND: + case TPT_ERR_CRC: + case TPT_ERR_MARKER: + case TPT_ERR_PDU_LEN_ERR: + case TPT_ERR_DDP_VERSION: + case TPT_ERR_RDMA_VERSION: + case TPT_ERR_OPCODE: + case TPT_ERR_DDP_QUEUE_NUM: + case TPT_ERR_MSN: + case TPT_ERR_TBIT: + case TPT_ERR_MO: + case TPT_ERR_MSN_GAP: + case TPT_ERR_MSN_RANGE: + case TPT_ERR_RQE_ADDR_BOUND: + case TPT_ERR_IRD_OVERFLOW: + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_QP_FATAL, 1); + break; + + default: + printk(KERN_ERR MOD "Unknown T3 status 0x%x QPID 0x%x\n", + CQE_STATUS(rsp_msg->cqe), qhp->wq.qpid); + post_qp_event(rnicp, chp, rsp_msg, IB_EVENT_QP_FATAL, 1); + break; + } +done: + if (atomic_dec_and_test(&chp->refcnt)) + wake_up(&chp->wait); + iwch_qp_rem_ref(&qhp->ibqp); +out: + dev_kfree_skb_irq(skb); +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c new file mode 100644 index 000000000000..2b6cd53bb3fc --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c @@ -0,0 +1,172 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include + +#include +#include + +#include "cxio_hal.h" +#include "iwch.h" +#include "iwch_provider.h" + +int iwch_register_mem(struct iwch_dev *rhp, struct iwch_pd *php, + struct iwch_mr *mhp, + int shift, + __be64 *page_list) +{ + u32 stag; + u32 mmid; + + + if (cxio_register_phys_mem(&rhp->rdev, + &stag, mhp->attr.pdid, + mhp->attr.perms, + mhp->attr.zbva, + mhp->attr.va_fbo, + mhp->attr.len, + shift-12, + page_list, + &mhp->attr.pbl_size, &mhp->attr.pbl_addr)) + return -ENOMEM; + mhp->attr.state = 1; + mhp->attr.stag = stag; + mmid = stag >> 8; + mhp->ibmr.rkey = mhp->ibmr.lkey = stag; + insert_handle(rhp, &rhp->mmidr, mhp, mmid); + PDBG("%s mmid 0x%x mhp %p\n", __FUNCTION__, mmid, mhp); + return 0; +} + +int iwch_reregister_mem(struct iwch_dev *rhp, struct iwch_pd *php, + struct iwch_mr *mhp, + int shift, + __be64 *page_list, + int npages) +{ + u32 stag; + u32 mmid; + + + /* We could support this... */ + if (npages > mhp->attr.pbl_size) + return -ENOMEM; + + stag = mhp->attr.stag; + if (cxio_reregister_phys_mem(&rhp->rdev, + &stag, mhp->attr.pdid, + mhp->attr.perms, + mhp->attr.zbva, + mhp->attr.va_fbo, + mhp->attr.len, + shift-12, + page_list, + &mhp->attr.pbl_size, &mhp->attr.pbl_addr)) + return -ENOMEM; + mhp->attr.state = 1; + mhp->attr.stag = stag; + mmid = stag >> 8; + mhp->ibmr.rkey = mhp->ibmr.lkey = stag; + insert_handle(rhp, &rhp->mmidr, mhp, mmid); + PDBG("%s mmid 0x%x mhp %p\n", __FUNCTION__, mmid, mhp); + return 0; +} + +int build_phys_page_list(struct ib_phys_buf *buffer_list, + int num_phys_buf, + u64 *iova_start, + u64 *total_size, + int *npages, + int *shift, + __be64 **page_list) +{ + u64 mask; + int i, j, n; + + mask = 0; + *total_size = 0; + for (i = 0; i < num_phys_buf; ++i) { + if (i != 0 && buffer_list[i].addr & ~PAGE_MASK) + return -EINVAL; + if (i != 0 && i != num_phys_buf - 1 && + (buffer_list[i].size & ~PAGE_MASK)) + return -EINVAL; + *total_size += buffer_list[i].size; + if (i > 0) + mask |= buffer_list[i].addr; + } + + if (*total_size > 0xFFFFFFFFULL) + return -ENOMEM; + + /* Find largest page shift we can use to cover buffers */ + for (*shift = PAGE_SHIFT; *shift < 27; ++(*shift)) + if (num_phys_buf > 1) { + if ((1ULL << *shift) & mask) + break; + } else + if (1ULL << *shift >= + buffer_list[0].size + + (buffer_list[0].addr & ((1ULL << *shift) - 1))) + break; + + buffer_list[0].size += buffer_list[0].addr & ((1ULL << *shift) - 1); + buffer_list[0].addr &= ~0ull << *shift; + + *npages = 0; + for (i = 0; i < num_phys_buf; ++i) + *npages += (buffer_list[i].size + + (1ULL << *shift) - 1) >> *shift; + + if (!*npages) + return -EINVAL; + + *page_list = kmalloc(sizeof(u64) * *npages, GFP_KERNEL); + if (!*page_list) + return -ENOMEM; + + n = 0; + for (i = 0; i < num_phys_buf; ++i) + for (j = 0; + j < (buffer_list[i].size + (1ULL << *shift) - 1) >> *shift; + ++j) + (*page_list)[n++] = cpu_to_be64(buffer_list[i].addr + + ((u64) j << *shift)); + + PDBG("%s va 0x%llx mask 0x%llx shift %d len %lld pbl_size %d\n", + __FUNCTION__, (unsigned long long) *iova_start, + (unsigned long long) mask, *shift, (unsigned long long) *total_size, + *npages); + + return 0; + +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c new file mode 100644 index 000000000000..6861087d776c --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -0,0 +1,1203 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include "cxio_hal.h" +#include "iwch.h" +#include "iwch_provider.h" +#include "iwch_cm.h" +#include "iwch_user.h" + +static int iwch_modify_port(struct ib_device *ibdev, + u8 port, int port_modify_mask, + struct ib_port_modify *props) +{ + return -ENOSYS; +} + +static struct ib_ah *iwch_ah_create(struct ib_pd *pd, + struct ib_ah_attr *ah_attr) +{ + return ERR_PTR(-ENOSYS); +} + +static int iwch_ah_destroy(struct ib_ah *ah) +{ + return -ENOSYS; +} + +static int iwch_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) +{ + return -ENOSYS; +} + +static int iwch_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) +{ + return -ENOSYS; +} + +static int iwch_process_mad(struct ib_device *ibdev, + int mad_flags, + u8 port_num, + struct ib_wc *in_wc, + struct ib_grh *in_grh, + struct ib_mad *in_mad, struct ib_mad *out_mad) +{ + return -ENOSYS; +} + +static int iwch_dealloc_ucontext(struct ib_ucontext *context) +{ + struct iwch_dev *rhp = to_iwch_dev(context->device); + struct iwch_ucontext *ucontext = to_iwch_ucontext(context); + struct iwch_mm_entry *mm, *tmp; + + PDBG("%s context %p\n", __FUNCTION__, context); + list_for_each_entry_safe(mm, tmp, &ucontext->mmaps, entry) + kfree(mm); + cxio_release_ucontext(&rhp->rdev, &ucontext->uctx); + kfree(ucontext); + return 0; +} + +static struct ib_ucontext *iwch_alloc_ucontext(struct ib_device *ibdev, + struct ib_udata *udata) +{ + struct iwch_ucontext *context; + struct iwch_dev *rhp = to_iwch_dev(ibdev); + + PDBG("%s ibdev %p\n", __FUNCTION__, ibdev); + context = kzalloc(sizeof(*context), GFP_KERNEL); + if (!context) + return ERR_PTR(-ENOMEM); + cxio_init_ucontext(&rhp->rdev, &context->uctx); + INIT_LIST_HEAD(&context->mmaps); + spin_lock_init(&context->mmap_lock); + return &context->ibucontext; +} + +static int iwch_destroy_cq(struct ib_cq *ib_cq) +{ + struct iwch_cq *chp; + + PDBG("%s ib_cq %p\n", __FUNCTION__, ib_cq); + chp = to_iwch_cq(ib_cq); + + remove_handle(chp->rhp, &chp->rhp->cqidr, chp->cq.cqid); + atomic_dec(&chp->refcnt); + wait_event(chp->wait, !atomic_read(&chp->refcnt)); + + cxio_destroy_cq(&chp->rhp->rdev, &chp->cq); + kfree(chp); + return 0; +} + +static struct ib_cq *iwch_create_cq(struct ib_device *ibdev, int entries, + struct ib_ucontext *ib_context, + struct ib_udata *udata) +{ + struct iwch_dev *rhp; + struct iwch_cq *chp; + struct iwch_create_cq_resp uresp; + struct iwch_create_cq_req ureq; + struct iwch_ucontext *ucontext = NULL; + + PDBG("%s ib_dev %p entries %d\n", __FUNCTION__, ibdev, entries); + rhp = to_iwch_dev(ibdev); + chp = kzalloc(sizeof(*chp), GFP_KERNEL); + if (!chp) + return ERR_PTR(-ENOMEM); + + if (ib_context) { + ucontext = to_iwch_ucontext(ib_context); + if (!t3a_device(rhp)) { + if (ib_copy_from_udata(&ureq, udata, sizeof (ureq))) { + kfree(chp); + return ERR_PTR(-EFAULT); + } + chp->user_rptr_addr = (u32 __user *)(unsigned long)ureq.user_rptr_addr; + } + } + + if (t3a_device(rhp)) { + + /* + * T3A: Add some fluff to handle extra CQEs inserted + * for various errors. + * Additional CQE possibilities: + * TERMINATE, + * incoming RDMA WRITE Failures + * incoming RDMA READ REQUEST FAILUREs + * NOTE: We cannot ensure the CQ won't overflow. + */ + entries += 16; + } + entries = roundup_pow_of_two(entries); + chp->cq.size_log2 = ilog2(entries); + + if (cxio_create_cq(&rhp->rdev, &chp->cq)) { + kfree(chp); + return ERR_PTR(-ENOMEM); + } + chp->rhp = rhp; + chp->ibcq.cqe = (1 << chp->cq.size_log2) - 1; + spin_lock_init(&chp->lock); + atomic_set(&chp->refcnt, 1); + init_waitqueue_head(&chp->wait); + insert_handle(rhp, &rhp->cqidr, chp, chp->cq.cqid); + + if (ucontext) { + struct iwch_mm_entry *mm; + + mm = kmalloc(sizeof *mm, GFP_KERNEL); + if (!mm) { + iwch_destroy_cq(&chp->ibcq); + return ERR_PTR(-ENOMEM); + } + uresp.cqid = chp->cq.cqid; + uresp.size_log2 = chp->cq.size_log2; + spin_lock(&ucontext->mmap_lock); + uresp.key = ucontext->key; + ucontext->key += PAGE_SIZE; + spin_unlock(&ucontext->mmap_lock); + if (ib_copy_to_udata(udata, &uresp, sizeof (uresp))) { + kfree(mm); + iwch_destroy_cq(&chp->ibcq); + return ERR_PTR(-EFAULT); + } + mm->key = uresp.key; + mm->addr = virt_to_phys(chp->cq.queue); + mm->len = PAGE_ALIGN((1UL << uresp.size_log2) * + sizeof (struct t3_cqe)); + insert_mmap(ucontext, mm); + } + PDBG("created cqid 0x%0x chp %p size 0x%0x, dma_addr 0x%0llx\n", + chp->cq.cqid, chp, (1 << chp->cq.size_log2), + (unsigned long long) chp->cq.dma_addr); + return &chp->ibcq; +} + +static int iwch_resize_cq(struct ib_cq *cq, int cqe, struct ib_udata *udata) +{ +#ifdef notyet + struct iwch_cq *chp = to_iwch_cq(cq); + struct t3_cq oldcq, newcq; + int ret; + + PDBG("%s ib_cq %p cqe %d\n", __FUNCTION__, cq, cqe); + + /* We don't downsize... */ + if (cqe <= cq->cqe) + return 0; + + /* create new t3_cq with new size */ + cqe = roundup_pow_of_two(cqe+1); + newcq.size_log2 = ilog2(cqe); + + /* Dont allow resize to less than the current wce count */ + if (cqe < Q_COUNT(chp->cq.rptr, chp->cq.wptr)) { + return -ENOMEM; + } + + /* Quiesce all QPs using this CQ */ + ret = iwch_quiesce_qps(chp); + if (ret) { + return ret; + } + + ret = cxio_create_cq(&chp->rhp->rdev, &newcq); + if (ret) { + return ret; + } + + /* copy CQEs */ + memcpy(newcq.queue, chp->cq.queue, (1 << chp->cq.size_log2) * + sizeof(struct t3_cqe)); + + /* old iwch_qp gets new t3_cq but keeps old cqid */ + oldcq = chp->cq; + chp->cq = newcq; + chp->cq.cqid = oldcq.cqid; + + /* resize new t3_cq to update the HW context */ + ret = cxio_resize_cq(&chp->rhp->rdev, &chp->cq); + if (ret) { + chp->cq = oldcq; + return ret; + } + chp->ibcq.cqe = (1<cq.size_log2) - 1; + + /* destroy old t3_cq */ + oldcq.cqid = newcq.cqid; + ret = cxio_destroy_cq(&chp->rhp->rdev, &oldcq); + if (ret) { + printk(KERN_ERR MOD "%s - cxio_destroy_cq failed %d\n", + __FUNCTION__, ret); + } + + /* add user hooks here */ + + /* resume qps */ + ret = iwch_resume_qps(chp); + return ret; +#else + return -ENOSYS; +#endif +} + +static int iwch_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify notify) +{ + struct iwch_dev *rhp; + struct iwch_cq *chp; + enum t3_cq_opcode cq_op; + int err; + unsigned long flag; + u32 rptr; + + chp = to_iwch_cq(ibcq); + rhp = chp->rhp; + if (notify == IB_CQ_SOLICITED) + cq_op = CQ_ARM_SE; + else + cq_op = CQ_ARM_AN; + if (chp->user_rptr_addr) { + if (get_user(rptr, chp->user_rptr_addr)) + return -EFAULT; + spin_lock_irqsave(&chp->lock, flag); + chp->cq.rptr = rptr; + } else + spin_lock_irqsave(&chp->lock, flag); + PDBG("%s rptr 0x%x\n", __FUNCTION__, chp->cq.rptr); + err = cxio_hal_cq_op(&rhp->rdev, &chp->cq, cq_op, 0); + spin_unlock_irqrestore(&chp->lock, flag); + if (err) + printk(KERN_ERR MOD "Error %d rearming CQID 0x%x\n", err, + chp->cq.cqid); + return err; +} + +static int iwch_mmap(struct ib_ucontext *context, struct vm_area_struct *vma) +{ + int len = vma->vm_end - vma->vm_start; + u32 key = vma->vm_pgoff << PAGE_SHIFT; + struct cxio_rdev *rdev_p; + int ret = 0; + struct iwch_mm_entry *mm; + struct iwch_ucontext *ucontext; + + PDBG("%s pgoff 0x%lx key 0x%x len %d\n", __FUNCTION__, vma->vm_pgoff, + key, len); + + if (vma->vm_start & (PAGE_SIZE-1)) { + return -EINVAL; + } + + rdev_p = &(to_iwch_dev(context->device)->rdev); + ucontext = to_iwch_ucontext(context); + + mm = remove_mmap(ucontext, key, len); + if (!mm) + return -EINVAL; + kfree(mm); + + if ((mm->addr >= rdev_p->rnic_info.udbell_physbase) && + (mm->addr < (rdev_p->rnic_info.udbell_physbase + + rdev_p->rnic_info.udbell_len))) { + + /* + * Map T3 DB register. + */ + if (vma->vm_flags & VM_READ) { + return -EPERM; + } + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND; + vma->vm_flags &= ~VM_MAYREAD; + ret = io_remap_pfn_range(vma, vma->vm_start, + mm->addr >> PAGE_SHIFT, + len, vma->vm_page_prot); + } else { + + /* + * Map WQ or CQ contig dma memory... + */ + ret = remap_pfn_range(vma, vma->vm_start, + mm->addr >> PAGE_SHIFT, + len, vma->vm_page_prot); + } + + return ret; +} + +static int iwch_deallocate_pd(struct ib_pd *pd) +{ + struct iwch_dev *rhp; + struct iwch_pd *php; + + php = to_iwch_pd(pd); + rhp = php->rhp; + PDBG("%s ibpd %p pdid 0x%x\n", __FUNCTION__, pd, php->pdid); + cxio_hal_put_pdid(rhp->rdev.rscp, php->pdid); + kfree(php); + return 0; +} + +static struct ib_pd *iwch_allocate_pd(struct ib_device *ibdev, + struct ib_ucontext *context, + struct ib_udata *udata) +{ + struct iwch_pd *php; + u32 pdid; + struct iwch_dev *rhp; + + PDBG("%s ibdev %p\n", __FUNCTION__, ibdev); + rhp = (struct iwch_dev *) ibdev; + pdid = cxio_hal_get_pdid(rhp->rdev.rscp); + if (!pdid) + return ERR_PTR(-EINVAL); + php = kzalloc(sizeof(*php), GFP_KERNEL); + if (!php) { + cxio_hal_put_pdid(rhp->rdev.rscp, pdid); + return ERR_PTR(-ENOMEM); + } + php->pdid = pdid; + php->rhp = rhp; + if (context) { + if (ib_copy_to_udata(udata, &php->pdid, sizeof (__u32))) { + iwch_deallocate_pd(&php->ibpd); + return ERR_PTR(-EFAULT); + } + } + PDBG("%s pdid 0x%0x ptr 0x%p\n", __FUNCTION__, pdid, php); + return &php->ibpd; +} + +static int iwch_dereg_mr(struct ib_mr *ib_mr) +{ + struct iwch_dev *rhp; + struct iwch_mr *mhp; + u32 mmid; + + PDBG("%s ib_mr %p\n", __FUNCTION__, ib_mr); + /* There can be no memory windows */ + if (atomic_read(&ib_mr->usecnt)) + return -EINVAL; + + mhp = to_iwch_mr(ib_mr); + rhp = mhp->rhp; + mmid = mhp->attr.stag >> 8; + cxio_dereg_mem(&rhp->rdev, mhp->attr.stag, mhp->attr.pbl_size, + mhp->attr.pbl_addr); + remove_handle(rhp, &rhp->mmidr, mmid); + if (mhp->kva) + kfree((void *) (unsigned long) mhp->kva); + PDBG("%s mmid 0x%x ptr %p\n", __FUNCTION__, mmid, mhp); + kfree(mhp); + return 0; +} + +static struct ib_mr *iwch_register_phys_mem(struct ib_pd *pd, + struct ib_phys_buf *buffer_list, + int num_phys_buf, + int acc, + u64 *iova_start) +{ + __be64 *page_list; + int shift; + u64 total_size; + int npages; + struct iwch_dev *rhp; + struct iwch_pd *php; + struct iwch_mr *mhp; + int ret; + + PDBG("%s ib_pd %p\n", __FUNCTION__, pd); + php = to_iwch_pd(pd); + rhp = php->rhp; + + acc = iwch_convert_access(acc); + + + mhp = kzalloc(sizeof(*mhp), GFP_KERNEL); + if (!mhp) + return ERR_PTR(-ENOMEM); + + /* First check that we have enough alignment */ + if ((*iova_start & ~PAGE_MASK) != (buffer_list[0].addr & ~PAGE_MASK)) { + ret = -EINVAL; + goto err; + } + + if (num_phys_buf > 1 && + ((buffer_list[0].addr + buffer_list[0].size) & ~PAGE_MASK)) { + ret = -EINVAL; + goto err; + } + + ret = build_phys_page_list(buffer_list, num_phys_buf, iova_start, + &total_size, &npages, &shift, &page_list); + if (ret) + goto err; + + mhp->rhp = rhp; + mhp->attr.pdid = php->pdid; + mhp->attr.zbva = 0; + + /* NOTE: TPT perms are backwards from BIND WR perms! */ + mhp->attr.perms = (acc & 0x1) << 3; + mhp->attr.perms |= (acc & 0x2) << 1; + mhp->attr.perms |= (acc & 0x4) >> 1; + mhp->attr.perms |= (acc & 0x8) >> 3; + + mhp->attr.va_fbo = *iova_start; + mhp->attr.page_size = shift - 12; + + mhp->attr.len = (u32) total_size; + mhp->attr.pbl_size = npages; + ret = iwch_register_mem(rhp, php, mhp, shift, page_list); + kfree(page_list); + if (ret) { + goto err; + } + return &mhp->ibmr; +err: + kfree(mhp); + return ERR_PTR(ret); + +} + +static int iwch_reregister_phys_mem(struct ib_mr *mr, + int mr_rereg_mask, + struct ib_pd *pd, + struct ib_phys_buf *buffer_list, + int num_phys_buf, + int acc, u64 * iova_start) +{ + + struct iwch_mr mh, *mhp; + struct iwch_pd *php; + struct iwch_dev *rhp; + int new_acc; + __be64 *page_list = NULL; + int shift = 0; + u64 total_size; + int npages; + int ret; + + PDBG("%s ib_mr %p ib_pd %p\n", __FUNCTION__, mr, pd); + + /* There can be no memory windows */ + if (atomic_read(&mr->usecnt)) + return -EINVAL; + + mhp = to_iwch_mr(mr); + rhp = mhp->rhp; + php = to_iwch_pd(mr->pd); + + /* make sure we are on the same adapter */ + if (rhp != php->rhp) + return -EINVAL; + + new_acc = mhp->attr.perms; + + memcpy(&mh, mhp, sizeof *mhp); + + if (mr_rereg_mask & IB_MR_REREG_PD) + php = to_iwch_pd(pd); + if (mr_rereg_mask & IB_MR_REREG_ACCESS) + mh.attr.perms = iwch_convert_access(acc); + if (mr_rereg_mask & IB_MR_REREG_TRANS) + ret = build_phys_page_list(buffer_list, num_phys_buf, + iova_start, + &total_size, &npages, + &shift, &page_list); + + ret = iwch_reregister_mem(rhp, php, &mh, shift, page_list, npages); + kfree(page_list); + if (ret) { + return ret; + } + if (mr_rereg_mask & IB_MR_REREG_PD) + mhp->attr.pdid = php->pdid; + if (mr_rereg_mask & IB_MR_REREG_ACCESS) + mhp->attr.perms = acc; + if (mr_rereg_mask & IB_MR_REREG_TRANS) { + mhp->attr.zbva = 0; + mhp->attr.va_fbo = *iova_start; + mhp->attr.page_size = shift - 12; + mhp->attr.len = (u32) total_size; + mhp->attr.pbl_size = npages; + } + + return 0; +} + + +static struct ib_mr *iwch_reg_user_mr(struct ib_pd *pd, struct ib_umem *region, + int acc, struct ib_udata *udata) +{ + __be64 *pages; + int shift, n, len; + int i, j, k; + int err = 0; + struct ib_umem_chunk *chunk; + struct iwch_dev *rhp; + struct iwch_pd *php; + struct iwch_mr *mhp; + struct iwch_reg_user_mr_resp uresp; + + PDBG("%s ib_pd %p\n", __FUNCTION__, pd); + shift = ffs(region->page_size) - 1; + + php = to_iwch_pd(pd); + rhp = php->rhp; + mhp = kzalloc(sizeof(*mhp), GFP_KERNEL); + if (!mhp) + return ERR_PTR(-ENOMEM); + + n = 0; + list_for_each_entry(chunk, ®ion->chunk_list, list) + n += chunk->nents; + + pages = kmalloc(n * sizeof(u64), GFP_KERNEL); + if (!pages) { + err = -ENOMEM; + goto err; + } + + acc = iwch_convert_access(acc); + + i = n = 0; + + list_for_each_entry(chunk, ®ion->chunk_list, list) + for (j = 0; j < chunk->nmap; ++j) { + len = sg_dma_len(&chunk->page_list[j]) >> shift; + for (k = 0; k < len; ++k) { + pages[i++] = cpu_to_be64(sg_dma_address( + &chunk->page_list[j]) + + region->page_size * k); + } + } + + mhp->rhp = rhp; + mhp->attr.pdid = php->pdid; + mhp->attr.zbva = 0; + mhp->attr.perms = (acc & 0x1) << 3; + mhp->attr.perms |= (acc & 0x2) << 1; + mhp->attr.perms |= (acc & 0x4) >> 1; + mhp->attr.perms |= (acc & 0x8) >> 3; + mhp->attr.va_fbo = region->virt_base; + mhp->attr.page_size = shift - 12; + mhp->attr.len = (u32) region->length; + mhp->attr.pbl_size = i; + err = iwch_register_mem(rhp, php, mhp, shift, pages); + kfree(pages); + if (err) + goto err; + + if (udata && t3b_device(rhp)) { + uresp.pbl_addr = (mhp->attr.pbl_addr - + rhp->rdev.rnic_info.pbl_base) >> 3; + PDBG("%s user resp pbl_addr 0x%x\n", __FUNCTION__, + uresp.pbl_addr); + + if (ib_copy_to_udata(udata, &uresp, sizeof (uresp))) { + iwch_dereg_mr(&mhp->ibmr); + err = -EFAULT; + goto err; + } + } + + return &mhp->ibmr; + +err: + kfree(mhp); + return ERR_PTR(err); +} + +static struct ib_mr *iwch_get_dma_mr(struct ib_pd *pd, int acc) +{ + struct ib_phys_buf bl; + u64 kva; + struct ib_mr *ibmr; + + PDBG("%s ib_pd %p\n", __FUNCTION__, pd); + + /* + * T3 only supports 32 bits of size. + */ + bl.size = 0xffffffff; + bl.addr = 0; + kva = 0; + ibmr = iwch_register_phys_mem(pd, &bl, 1, acc, &kva); + return ibmr; +} + +static struct ib_mw *iwch_alloc_mw(struct ib_pd *pd) +{ + struct iwch_dev *rhp; + struct iwch_pd *php; + struct iwch_mw *mhp; + u32 mmid; + u32 stag = 0; + int ret; + + php = to_iwch_pd(pd); + rhp = php->rhp; + mhp = kzalloc(sizeof(*mhp), GFP_KERNEL); + if (!mhp) + return ERR_PTR(-ENOMEM); + ret = cxio_allocate_window(&rhp->rdev, &stag, php->pdid); + if (ret) { + kfree(mhp); + return ERR_PTR(ret); + } + mhp->rhp = rhp; + mhp->attr.pdid = php->pdid; + mhp->attr.type = TPT_MW; + mhp->attr.stag = stag; + mmid = (stag) >> 8; + insert_handle(rhp, &rhp->mmidr, mhp, mmid); + PDBG("%s mmid 0x%x mhp %p stag 0x%x\n", __FUNCTION__, mmid, mhp, stag); + return &(mhp->ibmw); +} + +static int iwch_dealloc_mw(struct ib_mw *mw) +{ + struct iwch_dev *rhp; + struct iwch_mw *mhp; + u32 mmid; + + mhp = to_iwch_mw(mw); + rhp = mhp->rhp; + mmid = (mw->rkey) >> 8; + cxio_deallocate_window(&rhp->rdev, mhp->attr.stag); + remove_handle(rhp, &rhp->mmidr, mmid); + kfree(mhp); + PDBG("%s ib_mw %p mmid 0x%x ptr %p\n", __FUNCTION__, mw, mmid, mhp); + return 0; +} + +static int iwch_destroy_qp(struct ib_qp *ib_qp) +{ + struct iwch_dev *rhp; + struct iwch_qp *qhp; + struct iwch_qp_attributes attrs; + struct iwch_ucontext *ucontext; + + qhp = to_iwch_qp(ib_qp); + rhp = qhp->rhp; + + if (qhp->attr.state == IWCH_QP_STATE_RTS) { + attrs.next_state = IWCH_QP_STATE_ERROR; + iwch_modify_qp(rhp, qhp, IWCH_QP_ATTR_NEXT_STATE, &attrs, 0); + } + wait_event(qhp->wait, !qhp->ep); + + remove_handle(rhp, &rhp->qpidr, qhp->wq.qpid); + + atomic_dec(&qhp->refcnt); + wait_event(qhp->wait, !atomic_read(&qhp->refcnt)); + + ucontext = ib_qp->uobject ? to_iwch_ucontext(ib_qp->uobject->context) + : NULL; + cxio_destroy_qp(&rhp->rdev, &qhp->wq, + ucontext ? &ucontext->uctx : &rhp->rdev.uctx); + + PDBG("%s ib_qp %p qpid 0x%0x qhp %p\n", __FUNCTION__, + ib_qp, qhp->wq.qpid, qhp); + kfree(qhp); + return 0; +} + +static struct ib_qp *iwch_create_qp(struct ib_pd *pd, + struct ib_qp_init_attr *attrs, + struct ib_udata *udata) +{ + struct iwch_dev *rhp; + struct iwch_qp *qhp; + struct iwch_pd *php; + struct iwch_cq *schp; + struct iwch_cq *rchp; + struct iwch_create_qp_resp uresp; + int wqsize, sqsize, rqsize; + struct iwch_ucontext *ucontext; + + PDBG("%s ib_pd %p\n", __FUNCTION__, pd); + if (attrs->qp_type != IB_QPT_RC) + return ERR_PTR(-EINVAL); + php = to_iwch_pd(pd); + rhp = php->rhp; + schp = get_chp(rhp, ((struct iwch_cq *) attrs->send_cq)->cq.cqid); + rchp = get_chp(rhp, ((struct iwch_cq *) attrs->recv_cq)->cq.cqid); + if (!schp || !rchp) + return ERR_PTR(-EINVAL); + + /* The RQT size must be # of entries + 1 rounded up to a power of two */ + rqsize = roundup_pow_of_two(attrs->cap.max_recv_wr); + if (rqsize == attrs->cap.max_recv_wr) + rqsize = roundup_pow_of_two(attrs->cap.max_recv_wr+1); + + /* T3 doesn't support RQT depth < 16 */ + if (rqsize < 16) + rqsize = 16; + + if (rqsize > T3_MAX_RQ_SIZE) + return ERR_PTR(-EINVAL); + + /* + * NOTE: The SQ and total WQ sizes don't need to be + * a power of two. However, all the code assumes + * they are. EG: Q_FREECNT() and friends. + */ + sqsize = roundup_pow_of_two(attrs->cap.max_send_wr); + wqsize = roundup_pow_of_two(rqsize + sqsize); + PDBG("%s wqsize %d sqsize %d rqsize %d\n", __FUNCTION__, + wqsize, sqsize, rqsize); + qhp = kzalloc(sizeof(*qhp), GFP_KERNEL); + if (!qhp) + return ERR_PTR(-ENOMEM); + qhp->wq.size_log2 = ilog2(wqsize); + qhp->wq.rq_size_log2 = ilog2(rqsize); + qhp->wq.sq_size_log2 = ilog2(sqsize); + ucontext = pd->uobject ? to_iwch_ucontext(pd->uobject->context) : NULL; + if (cxio_create_qp(&rhp->rdev, !udata, &qhp->wq, + ucontext ? &ucontext->uctx : &rhp->rdev.uctx)) { + kfree(qhp); + return ERR_PTR(-ENOMEM); + } + attrs->cap.max_recv_wr = rqsize - 1; + attrs->cap.max_send_wr = sqsize; + qhp->rhp = rhp; + qhp->attr.pd = php->pdid; + qhp->attr.scq = ((struct iwch_cq *) attrs->send_cq)->cq.cqid; + qhp->attr.rcq = ((struct iwch_cq *) attrs->recv_cq)->cq.cqid; + qhp->attr.sq_num_entries = attrs->cap.max_send_wr; + qhp->attr.rq_num_entries = attrs->cap.max_recv_wr; + qhp->attr.sq_max_sges = attrs->cap.max_send_sge; + qhp->attr.sq_max_sges_rdma_write = attrs->cap.max_send_sge; + qhp->attr.rq_max_sges = attrs->cap.max_recv_sge; + qhp->attr.state = IWCH_QP_STATE_IDLE; + qhp->attr.next_state = IWCH_QP_STATE_IDLE; + + /* + * XXX - These don't get passed in from the openib user + * at create time. The CM sets them via a QP modify. + * Need to fix... I think the CM should + */ + qhp->attr.enable_rdma_read = 1; + qhp->attr.enable_rdma_write = 1; + qhp->attr.enable_bind = 1; + qhp->attr.max_ord = 1; + qhp->attr.max_ird = 1; + + spin_lock_init(&qhp->lock); + init_waitqueue_head(&qhp->wait); + atomic_set(&qhp->refcnt, 1); + insert_handle(rhp, &rhp->qpidr, qhp, qhp->wq.qpid); + + if (udata) { + + struct iwch_mm_entry *mm1, *mm2; + + mm1 = kmalloc(sizeof *mm1, GFP_KERNEL); + if (!mm1) { + iwch_destroy_qp(&qhp->ibqp); + return ERR_PTR(-ENOMEM); + } + + mm2 = kmalloc(sizeof *mm2, GFP_KERNEL); + if (!mm2) { + kfree(mm1); + iwch_destroy_qp(&qhp->ibqp); + return ERR_PTR(-ENOMEM); + } + + uresp.qpid = qhp->wq.qpid; + uresp.size_log2 = qhp->wq.size_log2; + uresp.sq_size_log2 = qhp->wq.sq_size_log2; + uresp.rq_size_log2 = qhp->wq.rq_size_log2; + spin_lock(&ucontext->mmap_lock); + uresp.key = ucontext->key; + ucontext->key += PAGE_SIZE; + uresp.db_key = ucontext->key; + ucontext->key += PAGE_SIZE; + spin_unlock(&ucontext->mmap_lock); + if (ib_copy_to_udata(udata, &uresp, sizeof (uresp))) { + kfree(mm1); + kfree(mm2); + iwch_destroy_qp(&qhp->ibqp); + return ERR_PTR(-EFAULT); + } + mm1->key = uresp.key; + mm1->addr = virt_to_phys(qhp->wq.queue); + mm1->len = PAGE_ALIGN(wqsize * sizeof (union t3_wr)); + insert_mmap(ucontext, mm1); + mm2->key = uresp.db_key; + mm2->addr = qhp->wq.udb & PAGE_MASK; + mm2->len = PAGE_SIZE; + insert_mmap(ucontext, mm2); + } + qhp->ibqp.qp_num = qhp->wq.qpid; + init_timer(&(qhp->timer)); + PDBG("%s sq_num_entries %d, rq_num_entries %d " + "qpid 0x%0x qhp %p dma_addr 0x%llx size %d\n", + __FUNCTION__, qhp->attr.sq_num_entries, qhp->attr.rq_num_entries, + qhp->wq.qpid, qhp, (unsigned long long) qhp->wq.dma_addr, + 1 << qhp->wq.size_log2); + return &qhp->ibqp; +} + +static int iwch_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, + int attr_mask, struct ib_udata *udata) +{ + struct iwch_dev *rhp; + struct iwch_qp *qhp; + enum iwch_qp_attr_mask mask = 0; + struct iwch_qp_attributes attrs; + + PDBG("%s ib_qp %p\n", __FUNCTION__, ibqp); + + /* iwarp does not support the RTR state */ + if ((attr_mask & IB_QP_STATE) && (attr->qp_state == IB_QPS_RTR)) + attr_mask &= ~IB_QP_STATE; + + /* Make sure we still have something left to do */ + if (!attr_mask) + return 0; + + memset(&attrs, 0, sizeof attrs); + qhp = to_iwch_qp(ibqp); + rhp = qhp->rhp; + + attrs.next_state = iwch_convert_state(attr->qp_state); + attrs.enable_rdma_read = (attr->qp_access_flags & + IB_ACCESS_REMOTE_READ) ? 1 : 0; + attrs.enable_rdma_write = (attr->qp_access_flags & + IB_ACCESS_REMOTE_WRITE) ? 1 : 0; + attrs.enable_bind = (attr->qp_access_flags & IB_ACCESS_MW_BIND) ? 1 : 0; + + + mask |= (attr_mask & IB_QP_STATE) ? IWCH_QP_ATTR_NEXT_STATE : 0; + mask |= (attr_mask & IB_QP_ACCESS_FLAGS) ? + (IWCH_QP_ATTR_ENABLE_RDMA_READ | + IWCH_QP_ATTR_ENABLE_RDMA_WRITE | + IWCH_QP_ATTR_ENABLE_RDMA_BIND) : 0; + + return iwch_modify_qp(rhp, qhp, mask, &attrs, 0); +} + +void iwch_qp_add_ref(struct ib_qp *qp) +{ + PDBG("%s ib_qp %p\n", __FUNCTION__, qp); + atomic_inc(&(to_iwch_qp(qp)->refcnt)); +} + +void iwch_qp_rem_ref(struct ib_qp *qp) +{ + PDBG("%s ib_qp %p\n", __FUNCTION__, qp); + if (atomic_dec_and_test(&(to_iwch_qp(qp)->refcnt))) + wake_up(&(to_iwch_qp(qp)->wait)); +} + +struct ib_qp *iwch_get_qp(struct ib_device *dev, int qpn) +{ + PDBG("%s ib_dev %p qpn 0x%x\n", __FUNCTION__, dev, qpn); + return (struct ib_qp *)get_qhp(to_iwch_dev(dev), qpn); +} + + +static int iwch_query_pkey(struct ib_device *ibdev, + u8 port, u16 index, u16 * pkey) +{ + PDBG("%s ibdev %p\n", __FUNCTION__, ibdev); + *pkey = 0; + return 0; +} + +static int iwch_query_gid(struct ib_device *ibdev, u8 port, + int index, union ib_gid *gid) +{ + struct iwch_dev *dev; + + PDBG("%s ibdev %p, port %d, index %d, gid %p\n", + __FUNCTION__, ibdev, port, index, gid); + dev = to_iwch_dev(ibdev); + BUG_ON(port == 0 || port > 2); + memset(&(gid->raw[0]), 0, sizeof(gid->raw)); + memcpy(&(gid->raw[0]), dev->rdev.port_info.lldevs[port-1]->dev_addr, 6); + return 0; +} + +static int iwch_query_device(struct ib_device *ibdev, + struct ib_device_attr *props) +{ + + struct iwch_dev *dev; + PDBG("%s ibdev %p\n", __FUNCTION__, ibdev); + + dev = to_iwch_dev(ibdev); + memset(props, 0, sizeof *props); + memcpy(&props->sys_image_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6); + props->device_cap_flags = dev->device_cap_flags; + props->vendor_id = (u32)dev->rdev.rnic_info.pdev->vendor; + props->vendor_part_id = (u32)dev->rdev.rnic_info.pdev->device; + props->max_mr_size = ~0ull; + props->max_qp = dev->attr.max_qps; + props->max_qp_wr = dev->attr.max_wrs; + props->max_sge = dev->attr.max_sge_per_wr; + props->max_sge_rd = 1; + props->max_qp_rd_atom = dev->attr.max_rdma_reads_per_qp; + props->max_cq = dev->attr.max_cqs; + props->max_cqe = dev->attr.max_cqes_per_cq; + props->max_mr = dev->attr.max_mem_regs; + props->max_pd = dev->attr.max_pds; + props->local_ca_ack_delay = 0; + + return 0; +} + +static int iwch_query_port(struct ib_device *ibdev, + u8 port, struct ib_port_attr *props) +{ + PDBG("%s ibdev %p\n", __FUNCTION__, ibdev); + props->max_mtu = IB_MTU_4096; + props->lid = 0; + props->lmc = 0; + props->sm_lid = 0; + props->sm_sl = 0; + props->state = IB_PORT_ACTIVE; + props->phys_state = 0; + props->port_cap_flags = + IB_PORT_CM_SUP | + IB_PORT_SNMP_TUNNEL_SUP | + IB_PORT_REINIT_SUP | + IB_PORT_DEVICE_MGMT_SUP | + IB_PORT_VENDOR_CLASS_SUP | IB_PORT_BOOT_MGMT_SUP; + props->gid_tbl_len = 1; + props->pkey_tbl_len = 1; + props->qkey_viol_cntr = 0; + props->active_width = 2; + props->active_speed = 2; + props->max_msg_sz = -1; + + return 0; +} + +static ssize_t show_rev(struct class_device *cdev, char *buf) +{ + struct iwch_dev *dev = container_of(cdev, struct iwch_dev, + ibdev.class_dev); + PDBG("%s class dev 0x%p\n", __FUNCTION__, cdev); + return sprintf(buf, "%d\n", dev->rdev.t3cdev_p->type); +} + +static ssize_t show_fw_ver(struct class_device *cdev, char *buf) +{ + struct iwch_dev *dev = container_of(cdev, struct iwch_dev, + ibdev.class_dev); + struct ethtool_drvinfo info; + struct net_device *lldev = dev->rdev.t3cdev_p->lldev; + + PDBG("%s class dev 0x%p\n", __FUNCTION__, cdev); + lldev->ethtool_ops->get_drvinfo(lldev, &info); + return sprintf(buf, "%s\n", info.fw_version); +} + +static ssize_t show_hca(struct class_device *cdev, char *buf) +{ + struct iwch_dev *dev = container_of(cdev, struct iwch_dev, + ibdev.class_dev); + struct ethtool_drvinfo info; + struct net_device *lldev = dev->rdev.t3cdev_p->lldev; + + PDBG("%s class dev 0x%p\n", __FUNCTION__, cdev); + lldev->ethtool_ops->get_drvinfo(lldev, &info); + return sprintf(buf, "%s\n", info.driver); +} + +static ssize_t show_board(struct class_device *cdev, char *buf) +{ + struct iwch_dev *dev = container_of(cdev, struct iwch_dev, + ibdev.class_dev); + PDBG("%s class dev 0x%p\n", __FUNCTION__, dev); + return sprintf(buf, "%x.%x\n", dev->rdev.rnic_info.pdev->vendor, + dev->rdev.rnic_info.pdev->device); +} + +static CLASS_DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL); +static CLASS_DEVICE_ATTR(fw_ver, S_IRUGO, show_fw_ver, NULL); +static CLASS_DEVICE_ATTR(hca_type, S_IRUGO, show_hca, NULL); +static CLASS_DEVICE_ATTR(board_id, S_IRUGO, show_board, NULL); + +static struct class_device_attribute *iwch_class_attributes[] = { + &class_device_attr_hw_rev, + &class_device_attr_fw_ver, + &class_device_attr_hca_type, + &class_device_attr_board_id +}; + +int iwch_register_device(struct iwch_dev *dev) +{ + int ret; + int i; + + PDBG("%s iwch_dev %p\n", __FUNCTION__, dev); + strlcpy(dev->ibdev.name, "cxgb3_%d", IB_DEVICE_NAME_MAX); + memset(&dev->ibdev.node_guid, 0, sizeof(dev->ibdev.node_guid)); + memcpy(&dev->ibdev.node_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6); + dev->ibdev.owner = THIS_MODULE; + dev->device_cap_flags = + (IB_DEVICE_ZERO_STAG | + IB_DEVICE_SEND_W_INV | IB_DEVICE_MEM_WINDOW); + + dev->ibdev.uverbs_cmd_mask = + (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) | + (1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) | + (1ull << IB_USER_VERBS_CMD_QUERY_PORT) | + (1ull << IB_USER_VERBS_CMD_ALLOC_PD) | + (1ull << IB_USER_VERBS_CMD_DEALLOC_PD) | + (1ull << IB_USER_VERBS_CMD_REG_MR) | + (1ull << IB_USER_VERBS_CMD_DEREG_MR) | + (1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) | + (1ull << IB_USER_VERBS_CMD_CREATE_CQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_CQ) | + (1ull << IB_USER_VERBS_CMD_REQ_NOTIFY_CQ) | + (1ull << IB_USER_VERBS_CMD_CREATE_QP) | + (1ull << IB_USER_VERBS_CMD_MODIFY_QP) | + (1ull << IB_USER_VERBS_CMD_POLL_CQ) | + (1ull << IB_USER_VERBS_CMD_DESTROY_QP) | + (1ull << IB_USER_VERBS_CMD_POST_SEND) | + (1ull << IB_USER_VERBS_CMD_POST_RECV); + dev->ibdev.node_type = RDMA_NODE_RNIC; + memcpy(dev->ibdev.node_desc, IWCH_NODE_DESC, sizeof(IWCH_NODE_DESC)); + dev->ibdev.phys_port_cnt = dev->rdev.port_info.nports; + dev->ibdev.dma_device = &(dev->rdev.rnic_info.pdev->dev); + dev->ibdev.class_dev.dev = &(dev->rdev.rnic_info.pdev->dev); + dev->ibdev.query_device = iwch_query_device; + dev->ibdev.query_port = iwch_query_port; + dev->ibdev.modify_port = iwch_modify_port; + dev->ibdev.query_pkey = iwch_query_pkey; + dev->ibdev.query_gid = iwch_query_gid; + dev->ibdev.alloc_ucontext = iwch_alloc_ucontext; + dev->ibdev.dealloc_ucontext = iwch_dealloc_ucontext; + dev->ibdev.mmap = iwch_mmap; + dev->ibdev.alloc_pd = iwch_allocate_pd; + dev->ibdev.dealloc_pd = iwch_deallocate_pd; + dev->ibdev.create_ah = iwch_ah_create; + dev->ibdev.destroy_ah = iwch_ah_destroy; + dev->ibdev.create_qp = iwch_create_qp; + dev->ibdev.modify_qp = iwch_ib_modify_qp; + dev->ibdev.destroy_qp = iwch_destroy_qp; + dev->ibdev.create_cq = iwch_create_cq; + dev->ibdev.destroy_cq = iwch_destroy_cq; + dev->ibdev.resize_cq = iwch_resize_cq; + dev->ibdev.poll_cq = iwch_poll_cq; + dev->ibdev.get_dma_mr = iwch_get_dma_mr; + dev->ibdev.reg_phys_mr = iwch_register_phys_mem; + dev->ibdev.rereg_phys_mr = iwch_reregister_phys_mem; + dev->ibdev.reg_user_mr = iwch_reg_user_mr; + dev->ibdev.dereg_mr = iwch_dereg_mr; + dev->ibdev.alloc_mw = iwch_alloc_mw; + dev->ibdev.bind_mw = iwch_bind_mw; + dev->ibdev.dealloc_mw = iwch_dealloc_mw; + + dev->ibdev.attach_mcast = iwch_multicast_attach; + dev->ibdev.detach_mcast = iwch_multicast_detach; + dev->ibdev.process_mad = iwch_process_mad; + + dev->ibdev.req_notify_cq = iwch_arm_cq; + dev->ibdev.post_send = iwch_post_send; + dev->ibdev.post_recv = iwch_post_receive; + + + dev->ibdev.iwcm = + (struct iw_cm_verbs *) kmalloc(sizeof(struct iw_cm_verbs), + GFP_KERNEL); + dev->ibdev.iwcm->connect = iwch_connect; + dev->ibdev.iwcm->accept = iwch_accept_cr; + dev->ibdev.iwcm->reject = iwch_reject_cr; + dev->ibdev.iwcm->create_listen = iwch_create_listen; + dev->ibdev.iwcm->destroy_listen = iwch_destroy_listen; + dev->ibdev.iwcm->add_ref = iwch_qp_add_ref; + dev->ibdev.iwcm->rem_ref = iwch_qp_rem_ref; + dev->ibdev.iwcm->get_qp = iwch_get_qp; + + ret = ib_register_device(&dev->ibdev); + if (ret) + goto bail1; + + for (i = 0; i < ARRAY_SIZE(iwch_class_attributes); ++i) { + ret = class_device_create_file(&dev->ibdev.class_dev, + iwch_class_attributes[i]); + if (ret) { + goto bail2; + } + } + return 0; +bail2: + ib_unregister_device(&dev->ibdev); +bail1: + return ret; +} + +void iwch_unregister_device(struct iwch_dev *dev) +{ + int i; + + PDBG("%s iwch_dev %p\n", __FUNCTION__, dev); + for (i = 0; i < ARRAY_SIZE(iwch_class_attributes); ++i) + class_device_remove_file(&dev->ibdev.class_dev, + iwch_class_attributes[i]); + ib_unregister_device(&dev->ibdev); + return; +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.h b/drivers/infiniband/hw/cxgb3/iwch_provider.h new file mode 100644 index 000000000000..61e3278fd7a8 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.h @@ -0,0 +1,367 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __IWCH_PROVIDER_H__ +#define __IWCH_PROVIDER_H__ + +#include +#include +#include +#include +#include "t3cdev.h" +#include "iwch.h" +#include "cxio_wr.h" +#include "cxio_hal.h" + +struct iwch_pd { + struct ib_pd ibpd; + u32 pdid; + struct iwch_dev *rhp; +}; + +static inline struct iwch_pd *to_iwch_pd(struct ib_pd *ibpd) +{ + return container_of(ibpd, struct iwch_pd, ibpd); +} + +struct tpt_attributes { + u32 stag; + u32 state:1; + u32 type:2; + u32 rsvd:1; + enum tpt_mem_perm perms; + u32 remote_invaliate_disable:1; + u32 zbva:1; + u32 mw_bind_enable:1; + u32 page_size:5; + + u32 pdid; + u32 qpid; + u32 pbl_addr; + u32 len; + u64 va_fbo; + u32 pbl_size; +}; + +struct iwch_mr { + struct ib_mr ibmr; + struct iwch_dev *rhp; + u64 kva; + struct tpt_attributes attr; +}; + +typedef struct iwch_mw iwch_mw_handle; + +static inline struct iwch_mr *to_iwch_mr(struct ib_mr *ibmr) +{ + return container_of(ibmr, struct iwch_mr, ibmr); +} + +struct iwch_mw { + struct ib_mw ibmw; + struct iwch_dev *rhp; + u64 kva; + struct tpt_attributes attr; +}; + +static inline struct iwch_mw *to_iwch_mw(struct ib_mw *ibmw) +{ + return container_of(ibmw, struct iwch_mw, ibmw); +} + +struct iwch_cq { + struct ib_cq ibcq; + struct iwch_dev *rhp; + struct t3_cq cq; + spinlock_t lock; + atomic_t refcnt; + wait_queue_head_t wait; + u32 __user *user_rptr_addr; +}; + +static inline struct iwch_cq *to_iwch_cq(struct ib_cq *ibcq) +{ + return container_of(ibcq, struct iwch_cq, ibcq); +} + +enum IWCH_QP_FLAGS { + QP_QUIESCED = 0x01 +}; + +struct iwch_mpa_attributes { + u8 recv_marker_enabled; + u8 xmit_marker_enabled; /* iWARP: enable inbound Read Resp. */ + u8 crc_enabled; + u8 version; /* 0 or 1 */ +}; + +struct iwch_qp_attributes { + u32 scq; + u32 rcq; + u32 sq_num_entries; + u32 rq_num_entries; + u32 sq_max_sges; + u32 sq_max_sges_rdma_write; + u32 rq_max_sges; + u32 state; + u8 enable_rdma_read; + u8 enable_rdma_write; /* enable inbound Read Resp. */ + u8 enable_bind; + u8 enable_mmid0_fastreg; /* Enable STAG0 + Fast-register */ + /* + * Next QP state. If specify the current state, only the + * QP attributes will be modified. + */ + u32 max_ord; + u32 max_ird; + u32 pd; /* IN */ + u32 next_state; + char terminate_buffer[52]; + u32 terminate_msg_len; + u8 is_terminate_local; + struct iwch_mpa_attributes mpa_attr; /* IN-OUT */ + struct iwch_ep *llp_stream_handle; + char *stream_msg_buf; /* Last stream msg. before Idle -> RTS */ + u32 stream_msg_buf_len; /* Only on Idle -> RTS */ +}; + +struct iwch_qp { + struct ib_qp ibqp; + struct iwch_dev *rhp; + struct iwch_ep *ep; + struct iwch_qp_attributes attr; + struct t3_wq wq; + spinlock_t lock; + atomic_t refcnt; + wait_queue_head_t wait; + enum IWCH_QP_FLAGS flags; + struct timer_list timer; +}; + +static inline int qp_quiesced(struct iwch_qp *qhp) +{ + return qhp->flags & QP_QUIESCED; +} + +static inline struct iwch_qp *to_iwch_qp(struct ib_qp *ibqp) +{ + return container_of(ibqp, struct iwch_qp, ibqp); +} + +void iwch_qp_add_ref(struct ib_qp *qp); +void iwch_qp_rem_ref(struct ib_qp *qp); +struct ib_qp *iwch_get_qp(struct ib_device *dev, int qpn); + +struct iwch_ucontext { + struct ib_ucontext ibucontext; + struct cxio_ucontext uctx; + u32 key; + spinlock_t mmap_lock; + struct list_head mmaps; +}; + +static inline struct iwch_ucontext *to_iwch_ucontext(struct ib_ucontext *c) +{ + return container_of(c, struct iwch_ucontext, ibucontext); +} + +struct iwch_mm_entry { + struct list_head entry; + u64 addr; + u32 key; + unsigned len; +}; + +static inline struct iwch_mm_entry *remove_mmap(struct iwch_ucontext *ucontext, + u32 key, unsigned len) +{ + struct list_head *pos, *nxt; + struct iwch_mm_entry *mm; + + spin_lock(&ucontext->mmap_lock); + list_for_each_safe(pos, nxt, &ucontext->mmaps) { + + mm = list_entry(pos, struct iwch_mm_entry, entry); + if (mm->key == key && mm->len == len) { + list_del_init(&mm->entry); + spin_unlock(&ucontext->mmap_lock); + PDBG("%s key 0x%x addr 0x%llx len %d\n", __FUNCTION__, + key, (unsigned long long) mm->addr, mm->len); + return mm; + } + } + spin_unlock(&ucontext->mmap_lock); + return NULL; +} + +static inline void insert_mmap(struct iwch_ucontext *ucontext, + struct iwch_mm_entry *mm) +{ + spin_lock(&ucontext->mmap_lock); + PDBG("%s key 0x%x addr 0x%llx len %d\n", __FUNCTION__, + mm->key, (unsigned long long) mm->addr, mm->len); + list_add_tail(&mm->entry, &ucontext->mmaps); + spin_unlock(&ucontext->mmap_lock); +} + +enum iwch_qp_attr_mask { + IWCH_QP_ATTR_NEXT_STATE = 1 << 0, + IWCH_QP_ATTR_ENABLE_RDMA_READ = 1 << 7, + IWCH_QP_ATTR_ENABLE_RDMA_WRITE = 1 << 8, + IWCH_QP_ATTR_ENABLE_RDMA_BIND = 1 << 9, + IWCH_QP_ATTR_MAX_ORD = 1 << 11, + IWCH_QP_ATTR_MAX_IRD = 1 << 12, + IWCH_QP_ATTR_LLP_STREAM_HANDLE = 1 << 22, + IWCH_QP_ATTR_STREAM_MSG_BUFFER = 1 << 23, + IWCH_QP_ATTR_MPA_ATTR = 1 << 24, + IWCH_QP_ATTR_QP_CONTEXT_ACTIVATE = 1 << 25, + IWCH_QP_ATTR_VALID_MODIFY = (IWCH_QP_ATTR_ENABLE_RDMA_READ | + IWCH_QP_ATTR_ENABLE_RDMA_WRITE | + IWCH_QP_ATTR_MAX_ORD | + IWCH_QP_ATTR_MAX_IRD | + IWCH_QP_ATTR_LLP_STREAM_HANDLE | + IWCH_QP_ATTR_STREAM_MSG_BUFFER | + IWCH_QP_ATTR_MPA_ATTR | + IWCH_QP_ATTR_QP_CONTEXT_ACTIVATE) +}; + +int iwch_modify_qp(struct iwch_dev *rhp, + struct iwch_qp *qhp, + enum iwch_qp_attr_mask mask, + struct iwch_qp_attributes *attrs, + int internal); + +enum iwch_qp_state { + IWCH_QP_STATE_IDLE, + IWCH_QP_STATE_RTS, + IWCH_QP_STATE_ERROR, + IWCH_QP_STATE_TERMINATE, + IWCH_QP_STATE_CLOSING, + IWCH_QP_STATE_TOT +}; + +static inline int iwch_convert_state(enum ib_qp_state ib_state) +{ + switch (ib_state) { + case IB_QPS_RESET: + case IB_QPS_INIT: + return IWCH_QP_STATE_IDLE; + case IB_QPS_RTS: + return IWCH_QP_STATE_RTS; + case IB_QPS_SQD: + return IWCH_QP_STATE_CLOSING; + case IB_QPS_SQE: + return IWCH_QP_STATE_TERMINATE; + case IB_QPS_ERR: + return IWCH_QP_STATE_ERROR; + default: + return -1; + } +} + +enum iwch_mem_perms { + IWCH_MEM_ACCESS_LOCAL_READ = 1 << 0, + IWCH_MEM_ACCESS_LOCAL_WRITE = 1 << 1, + IWCH_MEM_ACCESS_REMOTE_READ = 1 << 2, + IWCH_MEM_ACCESS_REMOTE_WRITE = 1 << 3, + IWCH_MEM_ACCESS_ATOMICS = 1 << 4, + IWCH_MEM_ACCESS_BINDING = 1 << 5, + IWCH_MEM_ACCESS_LOCAL = + (IWCH_MEM_ACCESS_LOCAL_READ | IWCH_MEM_ACCESS_LOCAL_WRITE), + IWCH_MEM_ACCESS_REMOTE = + (IWCH_MEM_ACCESS_REMOTE_WRITE | IWCH_MEM_ACCESS_REMOTE_READ) + /* cannot go beyond 1 << 31 */ +} __attribute__ ((packed)); + +static inline u32 iwch_convert_access(int acc) +{ + return (acc & IB_ACCESS_REMOTE_WRITE ? IWCH_MEM_ACCESS_REMOTE_WRITE : 0) + | (acc & IB_ACCESS_REMOTE_READ ? IWCH_MEM_ACCESS_REMOTE_READ : 0) | + (acc & IB_ACCESS_LOCAL_WRITE ? IWCH_MEM_ACCESS_LOCAL_WRITE : 0) | + (acc & IB_ACCESS_MW_BIND ? IWCH_MEM_ACCESS_BINDING : 0) | + IWCH_MEM_ACCESS_LOCAL_READ; +} + +enum iwch_mmid_state { + IWCH_STAG_STATE_VALID, + IWCH_STAG_STATE_INVALID +}; + +enum iwch_qp_query_flags { + IWCH_QP_QUERY_CONTEXT_NONE = 0x0, /* No ctx; Only attrs */ + IWCH_QP_QUERY_CONTEXT_GET = 0x1, /* Get ctx + attrs */ + IWCH_QP_QUERY_CONTEXT_SUSPEND = 0x2, /* Not Supported */ + + /* + * Quiesce QP context; Consumer + * will NOT replay outstanding WR + */ + IWCH_QP_QUERY_CONTEXT_QUIESCE = 0x4, + IWCH_QP_QUERY_CONTEXT_REMOVE = 0x8, + IWCH_QP_QUERY_TEST_USERWRITE = 0x32 /* Test special */ +}; + +int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, + struct ib_send_wr **bad_wr); +int iwch_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, + struct ib_recv_wr **bad_wr); +int iwch_bind_mw(struct ib_qp *qp, + struct ib_mw *mw, + struct ib_mw_bind *mw_bind); +int iwch_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc); +int iwch_post_terminate(struct iwch_qp *qhp, struct respQ_msg_t *rsp_msg); +int iwch_register_device(struct iwch_dev *dev); +void iwch_unregister_device(struct iwch_dev *dev); +int iwch_quiesce_qps(struct iwch_cq *chp); +int iwch_resume_qps(struct iwch_cq *chp); +void stop_read_rep_timer(struct iwch_qp *qhp); +int iwch_register_mem(struct iwch_dev *rhp, struct iwch_pd *php, + struct iwch_mr *mhp, + int shift, + __be64 *page_list); +int iwch_reregister_mem(struct iwch_dev *rhp, struct iwch_pd *php, + struct iwch_mr *mhp, + int shift, + __be64 *page_list, + int npages); +int build_phys_page_list(struct ib_phys_buf *buffer_list, + int num_phys_buf, + u64 *iova_start, + u64 *total_size, + int *npages, + int *shift, + __be64 **page_list); + + +#define IWCH_NODE_DESC "cxgb3 Chelsio Communications" + +#endif diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c new file mode 100644 index 000000000000..e066727504b6 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -0,0 +1,1007 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include "iwch_provider.h" +#include "iwch.h" +#include "iwch_cm.h" +#include "cxio_hal.h" + +#define NO_SUPPORT -1 + +static inline int iwch_build_rdma_send(union t3_wr *wqe, struct ib_send_wr *wr, + u8 * flit_cnt) +{ + int i; + u32 plen; + + switch (wr->opcode) { + case IB_WR_SEND: + case IB_WR_SEND_WITH_IMM: + if (wr->send_flags & IB_SEND_SOLICITED) + wqe->send.rdmaop = T3_SEND_WITH_SE; + else + wqe->send.rdmaop = T3_SEND; + wqe->send.rem_stag = 0; + break; +#if 0 /* Not currently supported */ + case TYPE_SEND_INVALIDATE: + case TYPE_SEND_INVALIDATE_IMMEDIATE: + wqe->send.rdmaop = T3_SEND_WITH_INV; + wqe->send.rem_stag = cpu_to_be32(wr->wr.rdma.rkey); + break; + case TYPE_SEND_SE_INVALIDATE: + wqe->send.rdmaop = T3_SEND_WITH_SE_INV; + wqe->send.rem_stag = cpu_to_be32(wr->wr.rdma.rkey); + break; +#endif + default: + break; + } + if (wr->num_sge > T3_MAX_SGE) + return -EINVAL; + wqe->send.reserved[0] = 0; + wqe->send.reserved[1] = 0; + wqe->send.reserved[2] = 0; + if (wr->opcode == IB_WR_SEND_WITH_IMM) { + plen = 4; + wqe->send.sgl[0].stag = wr->imm_data; + wqe->send.sgl[0].len = __constant_cpu_to_be32(0); + wqe->send.num_sgle = __constant_cpu_to_be32(0); + *flit_cnt = 5; + } else { + plen = 0; + for (i = 0; i < wr->num_sge; i++) { + if ((plen + wr->sg_list[i].length) < plen) { + return -EMSGSIZE; + } + plen += wr->sg_list[i].length; + wqe->send.sgl[i].stag = + cpu_to_be32(wr->sg_list[i].lkey); + wqe->send.sgl[i].len = + cpu_to_be32(wr->sg_list[i].length); + wqe->send.sgl[i].to = cpu_to_be64(wr->sg_list[i].addr); + } + wqe->send.num_sgle = cpu_to_be32(wr->num_sge); + *flit_cnt = 4 + ((wr->num_sge) << 1); + } + wqe->send.plen = cpu_to_be32(plen); + return 0; +} + +static inline int iwch_build_rdma_write(union t3_wr *wqe, struct ib_send_wr *wr, + u8 *flit_cnt) +{ + int i; + u32 plen; + if (wr->num_sge > T3_MAX_SGE) + return -EINVAL; + wqe->write.rdmaop = T3_RDMA_WRITE; + wqe->write.reserved[0] = 0; + wqe->write.reserved[1] = 0; + wqe->write.reserved[2] = 0; + wqe->write.stag_sink = cpu_to_be32(wr->wr.rdma.rkey); + wqe->write.to_sink = cpu_to_be64(wr->wr.rdma.remote_addr); + + if (wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) { + plen = 4; + wqe->write.sgl[0].stag = wr->imm_data; + wqe->write.sgl[0].len = __constant_cpu_to_be32(0); + wqe->write.num_sgle = __constant_cpu_to_be32(0); + *flit_cnt = 6; + } else { + plen = 0; + for (i = 0; i < wr->num_sge; i++) { + if ((plen + wr->sg_list[i].length) < plen) { + return -EMSGSIZE; + } + plen += wr->sg_list[i].length; + wqe->write.sgl[i].stag = + cpu_to_be32(wr->sg_list[i].lkey); + wqe->write.sgl[i].len = + cpu_to_be32(wr->sg_list[i].length); + wqe->write.sgl[i].to = + cpu_to_be64(wr->sg_list[i].addr); + } + wqe->write.num_sgle = cpu_to_be32(wr->num_sge); + *flit_cnt = 5 + ((wr->num_sge) << 1); + } + wqe->write.plen = cpu_to_be32(plen); + return 0; +} + +static inline int iwch_build_rdma_read(union t3_wr *wqe, struct ib_send_wr *wr, + u8 *flit_cnt) +{ + if (wr->num_sge > 1) + return -EINVAL; + wqe->read.rdmaop = T3_READ_REQ; + wqe->read.reserved[0] = 0; + wqe->read.reserved[1] = 0; + wqe->read.reserved[2] = 0; + wqe->read.rem_stag = cpu_to_be32(wr->wr.rdma.rkey); + wqe->read.rem_to = cpu_to_be64(wr->wr.rdma.remote_addr); + wqe->read.local_stag = cpu_to_be32(wr->sg_list[0].lkey); + wqe->read.local_len = cpu_to_be32(wr->sg_list[0].length); + wqe->read.local_to = cpu_to_be64(wr->sg_list[0].addr); + *flit_cnt = sizeof(struct t3_rdma_read_wr) >> 3; + return 0; +} + +/* + * TBD: this is going to be moved to firmware. Missing pdid/qpid check for now. + */ +static inline int iwch_sgl2pbl_map(struct iwch_dev *rhp, + struct ib_sge *sg_list, u32 num_sgle, + u32 * pbl_addr, u8 * page_size) +{ + int i; + struct iwch_mr *mhp; + u32 offset; + for (i = 0; i < num_sgle; i++) { + + mhp = get_mhp(rhp, (sg_list[i].lkey) >> 8); + if (!mhp) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EIO; + } + if (!mhp->attr.state) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EIO; + } + if (mhp->attr.zbva) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EIO; + } + + if (sg_list[i].addr < mhp->attr.va_fbo) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EINVAL; + } + if (sg_list[i].addr + ((u64) sg_list[i].length) < + sg_list[i].addr) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EINVAL; + } + if (sg_list[i].addr + ((u64) sg_list[i].length) > + mhp->attr.va_fbo + ((u64) mhp->attr.len)) { + PDBG("%s %d\n", __FUNCTION__, __LINE__); + return -EINVAL; + } + offset = sg_list[i].addr - mhp->attr.va_fbo; + offset += ((u32) mhp->attr.va_fbo) % + (1UL << (12 + mhp->attr.page_size)); + pbl_addr[i] = ((mhp->attr.pbl_addr - + rhp->rdev.rnic_info.pbl_base) >> 3) + + (offset >> (12 + mhp->attr.page_size)); + page_size[i] = mhp->attr.page_size; + } + return 0; +} + +static inline int iwch_build_rdma_recv(struct iwch_dev *rhp, + union t3_wr *wqe, + struct ib_recv_wr *wr) +{ + int i, err = 0; + u32 pbl_addr[4]; + u8 page_size[4]; + if (wr->num_sge > T3_MAX_SGE) + return -EINVAL; + err = iwch_sgl2pbl_map(rhp, wr->sg_list, wr->num_sge, pbl_addr, + page_size); + if (err) + return err; + wqe->recv.pagesz[0] = page_size[0]; + wqe->recv.pagesz[1] = page_size[1]; + wqe->recv.pagesz[2] = page_size[2]; + wqe->recv.pagesz[3] = page_size[3]; + wqe->recv.num_sgle = cpu_to_be32(wr->num_sge); + for (i = 0; i < wr->num_sge; i++) { + wqe->recv.sgl[i].stag = cpu_to_be32(wr->sg_list[i].lkey); + wqe->recv.sgl[i].len = cpu_to_be32(wr->sg_list[i].length); + + /* to in the WQE == the offset into the page */ + wqe->recv.sgl[i].to = cpu_to_be64(((u32) wr->sg_list[i].addr) % + (1UL << (12 + page_size[i]))); + + /* pbl_addr is the adapters address in the PBL */ + wqe->recv.pbl_addr[i] = cpu_to_be32(pbl_addr[i]); + } + for (; i < T3_MAX_SGE; i++) { + wqe->recv.sgl[i].stag = 0; + wqe->recv.sgl[i].len = 0; + wqe->recv.sgl[i].to = 0; + wqe->recv.pbl_addr[i] = 0; + } + return 0; +} + +int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, + struct ib_send_wr **bad_wr) +{ + int err = 0; + u8 t3_wr_flit_cnt; + enum t3_wr_opcode t3_wr_opcode = 0; + enum t3_wr_flags t3_wr_flags; + struct iwch_qp *qhp; + u32 idx; + union t3_wr *wqe; + u32 num_wrs; + unsigned long flag; + struct t3_swsq *sqp; + + qhp = to_iwch_qp(ibqp); + spin_lock_irqsave(&qhp->lock, flag); + if (qhp->attr.state > IWCH_QP_STATE_RTS) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -EINVAL; + } + num_wrs = Q_FREECNT(qhp->wq.sq_rptr, qhp->wq.sq_wptr, + qhp->wq.sq_size_log2); + if (num_wrs <= 0) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -ENOMEM; + } + while (wr) { + if (num_wrs == 0) { + err = -ENOMEM; + *bad_wr = wr; + break; + } + idx = Q_PTR2IDX(qhp->wq.wptr, qhp->wq.size_log2); + wqe = (union t3_wr *) (qhp->wq.queue + idx); + t3_wr_flags = 0; + if (wr->send_flags & IB_SEND_SOLICITED) + t3_wr_flags |= T3_SOLICITED_EVENT_FLAG; + if (wr->send_flags & IB_SEND_FENCE) + t3_wr_flags |= T3_READ_FENCE_FLAG; + if (wr->send_flags & IB_SEND_SIGNALED) + t3_wr_flags |= T3_COMPLETION_FLAG; + sqp = qhp->wq.sq + + Q_PTR2IDX(qhp->wq.sq_wptr, qhp->wq.sq_size_log2); + switch (wr->opcode) { + case IB_WR_SEND: + case IB_WR_SEND_WITH_IMM: + t3_wr_opcode = T3_WR_SEND; + err = iwch_build_rdma_send(wqe, wr, &t3_wr_flit_cnt); + break; + case IB_WR_RDMA_WRITE: + case IB_WR_RDMA_WRITE_WITH_IMM: + t3_wr_opcode = T3_WR_WRITE; + err = iwch_build_rdma_write(wqe, wr, &t3_wr_flit_cnt); + break; + case IB_WR_RDMA_READ: + t3_wr_opcode = T3_WR_READ; + t3_wr_flags = 0; /* T3 reads are always signaled */ + err = iwch_build_rdma_read(wqe, wr, &t3_wr_flit_cnt); + if (err) + break; + sqp->read_len = wqe->read.local_len; + if (!qhp->wq.oldest_read) + qhp->wq.oldest_read = sqp; + break; + default: + PDBG("%s post of type=%d TBD!\n", __FUNCTION__, + wr->opcode); + err = -EINVAL; + } + if (err) { + *bad_wr = wr; + break; + } + wqe->send.wrid.id0.hi = qhp->wq.sq_wptr; + sqp->wr_id = wr->wr_id; + sqp->opcode = wr2opcode(t3_wr_opcode); + sqp->sq_wptr = qhp->wq.sq_wptr; + sqp->complete = 0; + sqp->signaled = (wr->send_flags & IB_SEND_SIGNALED); + + build_fw_riwrh((void *) wqe, t3_wr_opcode, t3_wr_flags, + Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2), + 0, t3_wr_flit_cnt); + PDBG("%s cookie 0x%llx wq idx 0x%x swsq idx %ld opcode %d\n", + __FUNCTION__, (unsigned long long) wr->wr_id, idx, + Q_PTR2IDX(qhp->wq.sq_wptr, qhp->wq.sq_size_log2), + sqp->opcode); + wr = wr->next; + num_wrs--; + ++(qhp->wq.wptr); + ++(qhp->wq.sq_wptr); + } + spin_unlock_irqrestore(&qhp->lock, flag); + ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid); + return err; +} + +int iwch_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, + struct ib_recv_wr **bad_wr) +{ + int err = 0; + struct iwch_qp *qhp; + u32 idx; + union t3_wr *wqe; + u32 num_wrs; + unsigned long flag; + + qhp = to_iwch_qp(ibqp); + spin_lock_irqsave(&qhp->lock, flag); + if (qhp->attr.state > IWCH_QP_STATE_RTS) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -EINVAL; + } + num_wrs = Q_FREECNT(qhp->wq.rq_rptr, qhp->wq.rq_wptr, + qhp->wq.rq_size_log2) - 1; + if (!wr) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -EINVAL; + } + while (wr) { + idx = Q_PTR2IDX(qhp->wq.wptr, qhp->wq.size_log2); + wqe = (union t3_wr *) (qhp->wq.queue + idx); + if (num_wrs) + err = iwch_build_rdma_recv(qhp->rhp, wqe, wr); + else + err = -ENOMEM; + if (err) { + *bad_wr = wr; + break; + } + qhp->wq.rq[Q_PTR2IDX(qhp->wq.rq_wptr, qhp->wq.rq_size_log2)] = + wr->wr_id; + build_fw_riwrh((void *) wqe, T3_WR_RCV, T3_COMPLETION_FLAG, + Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2), + 0, sizeof(struct t3_receive_wr) >> 3); + PDBG("%s cookie 0x%llx idx 0x%x rq_wptr 0x%x rw_rptr 0x%x " + "wqe %p \n", __FUNCTION__, (unsigned long long) wr->wr_id, + idx, qhp->wq.rq_wptr, qhp->wq.rq_rptr, wqe); + ++(qhp->wq.rq_wptr); + ++(qhp->wq.wptr); + wr = wr->next; + num_wrs--; + } + spin_unlock_irqrestore(&qhp->lock, flag); + ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid); + return err; +} + +int iwch_bind_mw(struct ib_qp *qp, + struct ib_mw *mw, + struct ib_mw_bind *mw_bind) +{ + struct iwch_dev *rhp; + struct iwch_mw *mhp; + struct iwch_qp *qhp; + union t3_wr *wqe; + u32 pbl_addr; + u8 page_size; + u32 num_wrs; + unsigned long flag; + struct ib_sge sgl; + int err=0; + enum t3_wr_flags t3_wr_flags; + u32 idx; + struct t3_swsq *sqp; + + qhp = to_iwch_qp(qp); + mhp = to_iwch_mw(mw); + rhp = qhp->rhp; + + spin_lock_irqsave(&qhp->lock, flag); + if (qhp->attr.state > IWCH_QP_STATE_RTS) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -EINVAL; + } + num_wrs = Q_FREECNT(qhp->wq.sq_rptr, qhp->wq.sq_wptr, + qhp->wq.sq_size_log2); + if ((num_wrs) <= 0) { + spin_unlock_irqrestore(&qhp->lock, flag); + return -ENOMEM; + } + idx = Q_PTR2IDX(qhp->wq.wptr, qhp->wq.size_log2); + PDBG("%s: idx 0x%0x, mw 0x%p, mw_bind 0x%p\n", __FUNCTION__, idx, + mw, mw_bind); + wqe = (union t3_wr *) (qhp->wq.queue + idx); + + t3_wr_flags = 0; + if (mw_bind->send_flags & IB_SEND_SIGNALED) + t3_wr_flags = T3_COMPLETION_FLAG; + + sgl.addr = mw_bind->addr; + sgl.lkey = mw_bind->mr->lkey; + sgl.length = mw_bind->length; + wqe->bind.reserved = 0; + wqe->bind.type = T3_VA_BASED_TO; + + /* TBD: check perms */ + wqe->bind.perms = iwch_convert_access(mw_bind->mw_access_flags); + wqe->bind.mr_stag = cpu_to_be32(mw_bind->mr->lkey); + wqe->bind.mw_stag = cpu_to_be32(mw->rkey); + wqe->bind.mw_len = cpu_to_be32(mw_bind->length); + wqe->bind.mw_va = cpu_to_be64(mw_bind->addr); + err = iwch_sgl2pbl_map(rhp, &sgl, 1, &pbl_addr, &page_size); + if (err) { + spin_unlock_irqrestore(&qhp->lock, flag); + return err; + } + wqe->send.wrid.id0.hi = qhp->wq.sq_wptr; + sqp = qhp->wq.sq + Q_PTR2IDX(qhp->wq.sq_wptr, qhp->wq.sq_size_log2); + sqp->wr_id = mw_bind->wr_id; + sqp->opcode = T3_BIND_MW; + sqp->sq_wptr = qhp->wq.sq_wptr; + sqp->complete = 0; + sqp->signaled = (mw_bind->send_flags & IB_SEND_SIGNALED); + wqe->bind.mr_pbl_addr = cpu_to_be32(pbl_addr); + wqe->bind.mr_pagesz = page_size; + wqe->flit[T3_SQ_COOKIE_FLIT] = mw_bind->wr_id; + build_fw_riwrh((void *)wqe, T3_WR_BIND, t3_wr_flags, + Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2), 0, + sizeof(struct t3_bind_mw_wr) >> 3); + ++(qhp->wq.wptr); + ++(qhp->wq.sq_wptr); + spin_unlock_irqrestore(&qhp->lock, flag); + + ring_doorbell(qhp->wq.doorbell, qhp->wq.qpid); + + return err; +} + +static inline void build_term_codes(int t3err, u8 *layer_type, u8 *ecode, + int tagged) +{ + switch (t3err) { + case TPT_ERR_STAG: + if (tagged == 1) { + *layer_type = LAYER_DDP|DDP_TAGGED_ERR; + *ecode = DDPT_INV_STAG; + } else if (tagged == 2) { + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT; + *ecode = RDMAP_INV_STAG; + } + break; + case TPT_ERR_PDID: + case TPT_ERR_QPID: + case TPT_ERR_ACCESS: + if (tagged == 1) { + *layer_type = LAYER_DDP|DDP_TAGGED_ERR; + *ecode = DDPT_STAG_NOT_ASSOC; + } else if (tagged == 2) { + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT; + *ecode = RDMAP_STAG_NOT_ASSOC; + } + break; + case TPT_ERR_WRAP: + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT; + *ecode = RDMAP_TO_WRAP; + break; + case TPT_ERR_BOUND: + if (tagged == 1) { + *layer_type = LAYER_DDP|DDP_TAGGED_ERR; + *ecode = DDPT_BASE_BOUNDS; + } else if (tagged == 2) { + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_PROT; + *ecode = RDMAP_BASE_BOUNDS; + } else { + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_MSG_TOOBIG; + } + break; + case TPT_ERR_INVALIDATE_SHARED_MR: + case TPT_ERR_INVALIDATE_MR_WITH_MW_BOUND: + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_OP; + *ecode = RDMAP_CANT_INV_STAG; + break; + case TPT_ERR_ECC: + case TPT_ERR_ECC_PSTAG: + case TPT_ERR_INTERNAL_ERR: + *layer_type = LAYER_RDMAP|RDMAP_LOCAL_CATA; + *ecode = 0; + break; + case TPT_ERR_OUT_OF_RQE: + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_INV_MSN_NOBUF; + break; + case TPT_ERR_PBL_ADDR_BOUND: + *layer_type = LAYER_DDP|DDP_TAGGED_ERR; + *ecode = DDPT_BASE_BOUNDS; + break; + case TPT_ERR_CRC: + *layer_type = LAYER_MPA|DDP_LLP; + *ecode = MPA_CRC_ERR; + break; + case TPT_ERR_MARKER: + *layer_type = LAYER_MPA|DDP_LLP; + *ecode = MPA_MARKER_ERR; + break; + case TPT_ERR_PDU_LEN_ERR: + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_MSG_TOOBIG; + break; + case TPT_ERR_DDP_VERSION: + if (tagged) { + *layer_type = LAYER_DDP|DDP_TAGGED_ERR; + *ecode = DDPT_INV_VERS; + } else { + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_INV_VERS; + } + break; + case TPT_ERR_RDMA_VERSION: + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_OP; + *ecode = RDMAP_INV_VERS; + break; + case TPT_ERR_OPCODE: + *layer_type = LAYER_RDMAP|RDMAP_REMOTE_OP; + *ecode = RDMAP_INV_OPCODE; + break; + case TPT_ERR_DDP_QUEUE_NUM: + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_INV_QN; + break; + case TPT_ERR_MSN: + case TPT_ERR_MSN_GAP: + case TPT_ERR_MSN_RANGE: + case TPT_ERR_IRD_OVERFLOW: + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_INV_MSN_RANGE; + break; + case TPT_ERR_TBIT: + *layer_type = LAYER_DDP|DDP_LOCAL_CATA; + *ecode = 0; + break; + case TPT_ERR_MO: + *layer_type = LAYER_DDP|DDP_UNTAGGED_ERR; + *ecode = DDPU_INV_MO; + break; + default: + *layer_type = LAYER_RDMAP|DDP_LOCAL_CATA; + *ecode = 0; + break; + } +} + +/* + * This posts a TERMINATE with layer=RDMA, type=catastrophic. + */ +int iwch_post_terminate(struct iwch_qp *qhp, struct respQ_msg_t *rsp_msg) +{ + union t3_wr *wqe; + struct terminate_message *term; + int status; + int tagged = 0; + struct sk_buff *skb; + + PDBG("%s %d\n", __FUNCTION__, __LINE__); + skb = alloc_skb(40, GFP_ATOMIC); + if (!skb) { + printk(KERN_ERR "%s cannot send TERMINATE!\n", __FUNCTION__); + return -ENOMEM; + } + wqe = (union t3_wr *)skb_put(skb, 40); + memset(wqe, 0, 40); + wqe->send.rdmaop = T3_TERMINATE; + + /* immediate data length */ + wqe->send.plen = htonl(4); + + /* immediate data starts here. */ + term = (struct terminate_message *)wqe->send.sgl; + if (rsp_msg) { + status = CQE_STATUS(rsp_msg->cqe); + if (CQE_OPCODE(rsp_msg->cqe) == T3_RDMA_WRITE) + tagged = 1; + if ((CQE_OPCODE(rsp_msg->cqe) == T3_READ_REQ) || + (CQE_OPCODE(rsp_msg->cqe) == T3_READ_RESP)) + tagged = 2; + } else { + status = TPT_ERR_INTERNAL_ERR; + } + build_term_codes(status, &term->layer_etype, &term->ecode, tagged); + build_fw_riwrh((void *)wqe, T3_WR_SEND, + T3_COMPLETION_FLAG | T3_NOTIFY_FLAG, 1, + qhp->ep->hwtid, 5); + skb->priority = CPL_PRIORITY_DATA; + return cxgb3_ofld_send(qhp->rhp->rdev.t3cdev_p, skb); +} + +/* + * Assumes qhp lock is held. + */ +static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag) +{ + struct iwch_cq *rchp, *schp; + int count; + + rchp = get_chp(qhp->rhp, qhp->attr.rcq); + schp = get_chp(qhp->rhp, qhp->attr.scq); + + PDBG("%s qhp %p rchp %p schp %p\n", __FUNCTION__, qhp, rchp, schp); + /* take a ref on the qhp since we must release the lock */ + atomic_inc(&qhp->refcnt); + spin_unlock_irqrestore(&qhp->lock, *flag); + + /* locking heirarchy: cq lock first, then qp lock. */ + spin_lock_irqsave(&rchp->lock, *flag); + spin_lock(&qhp->lock); + cxio_flush_hw_cq(&rchp->cq); + cxio_count_rcqes(&rchp->cq, &qhp->wq, &count); + cxio_flush_rq(&qhp->wq, &rchp->cq, count); + spin_unlock(&qhp->lock); + spin_unlock_irqrestore(&rchp->lock, *flag); + + /* locking heirarchy: cq lock first, then qp lock. */ + spin_lock_irqsave(&schp->lock, *flag); + spin_lock(&qhp->lock); + cxio_flush_hw_cq(&schp->cq); + cxio_count_scqes(&schp->cq, &qhp->wq, &count); + cxio_flush_sq(&qhp->wq, &schp->cq, count); + spin_unlock(&qhp->lock); + spin_unlock_irqrestore(&schp->lock, *flag); + + /* deref */ + if (atomic_dec_and_test(&qhp->refcnt)) + wake_up(&qhp->wait); + + spin_lock_irqsave(&qhp->lock, *flag); +} + +static inline void flush_qp(struct iwch_qp *qhp, unsigned long *flag) +{ + if (t3b_device(qhp->rhp)) + cxio_set_wq_in_error(&qhp->wq); + else + __flush_qp(qhp, flag); +} + + +/* + * Return non zero if at least one RECV was pre-posted. + */ +static inline int rqes_posted(struct iwch_qp *qhp) +{ + return fw_riwrh_opcode((struct fw_riwrh *)qhp->wq.queue) == T3_WR_RCV; +} + +static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp, + enum iwch_qp_attr_mask mask, + struct iwch_qp_attributes *attrs) +{ + struct t3_rdma_init_attr init_attr; + int ret; + + init_attr.tid = qhp->ep->hwtid; + init_attr.qpid = qhp->wq.qpid; + init_attr.pdid = qhp->attr.pd; + init_attr.scqid = qhp->attr.scq; + init_attr.rcqid = qhp->attr.rcq; + init_attr.rq_addr = qhp->wq.rq_addr; + init_attr.rq_size = 1 << qhp->wq.rq_size_log2; + init_attr.mpaattrs = uP_RI_MPA_IETF_ENABLE | + qhp->attr.mpa_attr.recv_marker_enabled | + (qhp->attr.mpa_attr.xmit_marker_enabled << 1) | + (qhp->attr.mpa_attr.crc_enabled << 2); + + /* + * XXX - The IWCM doesn't quite handle getting these + * attrs set before going into RTS. For now, just turn + * them on always... + */ +#if 0 + init_attr.qpcaps = qhp->attr.enableRdmaRead | + (qhp->attr.enableRdmaWrite << 1) | + (qhp->attr.enableBind << 2) | + (qhp->attr.enable_stag0_fastreg << 3) | + (qhp->attr.enable_stag0_fastreg << 4); +#else + init_attr.qpcaps = 0x1f; +#endif + init_attr.tcp_emss = qhp->ep->emss; + init_attr.ord = qhp->attr.max_ord; + init_attr.ird = qhp->attr.max_ird; + init_attr.qp_dma_addr = qhp->wq.dma_addr; + init_attr.qp_dma_size = (1UL << qhp->wq.size_log2); + init_attr.flags = rqes_posted(qhp) ? RECVS_POSTED : 0; + PDBG("%s init_attr.rq_addr 0x%x init_attr.rq_size = %d " + "flags 0x%x qpcaps 0x%x\n", __FUNCTION__, + init_attr.rq_addr, init_attr.rq_size, + init_attr.flags, init_attr.qpcaps); + ret = cxio_rdma_init(&rhp->rdev, &init_attr); + PDBG("%s ret %d\n", __FUNCTION__, ret); + return ret; +} + +int iwch_modify_qp(struct iwch_dev *rhp, struct iwch_qp *qhp, + enum iwch_qp_attr_mask mask, + struct iwch_qp_attributes *attrs, + int internal) +{ + int ret = 0; + struct iwch_qp_attributes newattr = qhp->attr; + unsigned long flag; + int disconnect = 0; + int terminate = 0; + int abort = 0; + int free = 0; + struct iwch_ep *ep = NULL; + + PDBG("%s qhp %p qpid 0x%x ep %p state %d -> %d\n", __FUNCTION__, + qhp, qhp->wq.qpid, qhp->ep, qhp->attr.state, + (mask & IWCH_QP_ATTR_NEXT_STATE) ? attrs->next_state : -1); + + spin_lock_irqsave(&qhp->lock, flag); + + /* Process attr changes if in IDLE */ + if (mask & IWCH_QP_ATTR_VALID_MODIFY) { + if (qhp->attr.state != IWCH_QP_STATE_IDLE) { + ret = -EIO; + goto out; + } + if (mask & IWCH_QP_ATTR_ENABLE_RDMA_READ) + newattr.enable_rdma_read = attrs->enable_rdma_read; + if (mask & IWCH_QP_ATTR_ENABLE_RDMA_WRITE) + newattr.enable_rdma_write = attrs->enable_rdma_write; + if (mask & IWCH_QP_ATTR_ENABLE_RDMA_BIND) + newattr.enable_bind = attrs->enable_bind; + if (mask & IWCH_QP_ATTR_MAX_ORD) { + if (attrs->max_ord > + rhp->attr.max_rdma_read_qp_depth) { + ret = -EINVAL; + goto out; + } + newattr.max_ord = attrs->max_ord; + } + if (mask & IWCH_QP_ATTR_MAX_IRD) { + if (attrs->max_ird > + rhp->attr.max_rdma_reads_per_qp) { + ret = -EINVAL; + goto out; + } + newattr.max_ird = attrs->max_ird; + } + qhp->attr = newattr; + } + + if (!(mask & IWCH_QP_ATTR_NEXT_STATE)) + goto out; + if (qhp->attr.state == attrs->next_state) + goto out; + + switch (qhp->attr.state) { + case IWCH_QP_STATE_IDLE: + switch (attrs->next_state) { + case IWCH_QP_STATE_RTS: + if (!(mask & IWCH_QP_ATTR_LLP_STREAM_HANDLE)) { + ret = -EINVAL; + goto out; + } + if (!(mask & IWCH_QP_ATTR_MPA_ATTR)) { + ret = -EINVAL; + goto out; + } + qhp->attr.mpa_attr = attrs->mpa_attr; + qhp->attr.llp_stream_handle = attrs->llp_stream_handle; + qhp->ep = qhp->attr.llp_stream_handle; + qhp->attr.state = IWCH_QP_STATE_RTS; + + /* + * Ref the endpoint here and deref when we + * disassociate the endpoint from the QP. This + * happens in CLOSING->IDLE transition or *->ERROR + * transition. + */ + get_ep(&qhp->ep->com); + spin_unlock_irqrestore(&qhp->lock, flag); + ret = rdma_init(rhp, qhp, mask, attrs); + spin_lock_irqsave(&qhp->lock, flag); + if (ret) + goto err; + break; + case IWCH_QP_STATE_ERROR: + qhp->attr.state = IWCH_QP_STATE_ERROR; + flush_qp(qhp, &flag); + break; + default: + ret = -EINVAL; + goto out; + } + break; + case IWCH_QP_STATE_RTS: + switch (attrs->next_state) { + case IWCH_QP_STATE_CLOSING: + BUG_ON(atomic_read(&qhp->ep->com.kref.refcount) < 2); + qhp->attr.state = IWCH_QP_STATE_CLOSING; + if (!internal) { + abort=0; + disconnect = 1; + ep = qhp->ep; + } + break; + case IWCH_QP_STATE_TERMINATE: + qhp->attr.state = IWCH_QP_STATE_TERMINATE; + if (!internal) + terminate = 1; + break; + case IWCH_QP_STATE_ERROR: + qhp->attr.state = IWCH_QP_STATE_ERROR; + if (!internal) { + abort=1; + disconnect = 1; + ep = qhp->ep; + } + goto err; + break; + default: + ret = -EINVAL; + goto out; + } + break; + case IWCH_QP_STATE_CLOSING: + if (!internal) { + ret = -EINVAL; + goto out; + } + switch (attrs->next_state) { + case IWCH_QP_STATE_IDLE: + qhp->attr.state = IWCH_QP_STATE_IDLE; + qhp->attr.llp_stream_handle = NULL; + put_ep(&qhp->ep->com); + qhp->ep = NULL; + wake_up(&qhp->wait); + break; + case IWCH_QP_STATE_ERROR: + goto err; + default: + ret = -EINVAL; + goto err; + } + break; + case IWCH_QP_STATE_ERROR: + if (attrs->next_state != IWCH_QP_STATE_IDLE) { + ret = -EINVAL; + goto out; + } + + if (!Q_EMPTY(qhp->wq.sq_rptr, qhp->wq.sq_wptr) || + !Q_EMPTY(qhp->wq.rq_rptr, qhp->wq.rq_wptr)) { + ret = -EINVAL; + goto out; + } + qhp->attr.state = IWCH_QP_STATE_IDLE; + memset(&qhp->attr, 0, sizeof(qhp->attr)); + break; + case IWCH_QP_STATE_TERMINATE: + if (!internal) { + ret = -EINVAL; + goto out; + } + goto err; + break; + default: + printk(KERN_ERR "%s in a bad state %d\n", + __FUNCTION__, qhp->attr.state); + ret = -EINVAL; + goto err; + break; + } + goto out; +err: + PDBG("%s disassociating ep %p qpid 0x%x\n", __FUNCTION__, qhp->ep, + qhp->wq.qpid); + + /* disassociate the LLP connection */ + qhp->attr.llp_stream_handle = NULL; + ep = qhp->ep; + qhp->ep = NULL; + qhp->attr.state = IWCH_QP_STATE_ERROR; + free=1; + wake_up(&qhp->wait); + BUG_ON(!ep); + flush_qp(qhp, &flag); +out: + spin_unlock_irqrestore(&qhp->lock, flag); + + if (terminate) + iwch_post_terminate(qhp, NULL); + + /* + * If disconnect is 1, then we need to initiate a disconnect + * on the EP. This can be a normal close (RTS->CLOSING) or + * an abnormal close (RTS/CLOSING->ERROR). + */ + if (disconnect) + iwch_ep_disconnect(ep, abort, GFP_KERNEL); + + /* + * If free is 1, then we've disassociated the EP from the QP + * and we need to dereference the EP. + */ + if (free) + put_ep(&ep->com); + + PDBG("%s exit state %d\n", __FUNCTION__, qhp->attr.state); + return ret; +} + +static int quiesce_qp(struct iwch_qp *qhp) +{ + spin_lock_irq(&qhp->lock); + iwch_quiesce_tid(qhp->ep); + qhp->flags |= QP_QUIESCED; + spin_unlock_irq(&qhp->lock); + return 0; +} + +static int resume_qp(struct iwch_qp *qhp) +{ + spin_lock_irq(&qhp->lock); + iwch_resume_tid(qhp->ep); + qhp->flags &= ~QP_QUIESCED; + spin_unlock_irq(&qhp->lock); + return 0; +} + +int iwch_quiesce_qps(struct iwch_cq *chp) +{ + int i; + struct iwch_qp *qhp; + + for (i=0; i < T3_MAX_NUM_QP; i++) { + qhp = get_qhp(chp->rhp, i); + if (!qhp) + continue; + if ((qhp->attr.rcq == chp->cq.cqid) && !qp_quiesced(qhp)) { + quiesce_qp(qhp); + continue; + } + if ((qhp->attr.scq == chp->cq.cqid) && !qp_quiesced(qhp)) + quiesce_qp(qhp); + } + return 0; +} + +int iwch_resume_qps(struct iwch_cq *chp) +{ + int i; + struct iwch_qp *qhp; + + for (i=0; i < T3_MAX_NUM_QP; i++) { + qhp = get_qhp(chp->rhp, i); + if (!qhp) + continue; + if ((qhp->attr.rcq == chp->cq.cqid) && qp_quiesced(qhp)) { + resume_qp(qhp); + continue; + } + if ((qhp->attr.scq == chp->cq.cqid) && qp_quiesced(qhp)) + resume_qp(qhp); + } + return 0; +} diff --git a/drivers/infiniband/hw/cxgb3/iwch_user.h b/drivers/infiniband/hw/cxgb3/iwch_user.h new file mode 100644 index 000000000000..c4e7fbea8bbd --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/iwch_user.h @@ -0,0 +1,67 @@ +/* + * Copyright (c) 2006 Chelsio, Inc. All rights reserved. + * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef __IWCH_USER_H__ +#define __IWCH_USER_H__ + +#define IWCH_UVERBS_ABI_VERSION 1 + +/* + * Make sure that all structs defined in this file remain laid out so + * that they pack the same way on 32-bit and 64-bit architectures (to + * avoid incompatibility between 32-bit userspace and 64-bit kernels). + * In particular do not use pointer types -- pass pointers in __u64 + * instead. + */ +struct iwch_create_cq_req { + __u64 user_rptr_addr; +}; + +struct iwch_create_cq_resp { + __u64 key; + __u32 cqid; + __u32 size_log2; +}; + +struct iwch_create_qp_resp { + __u64 key; + __u64 db_key; + __u32 qpid; + __u32 size_log2; + __u32 sq_size_log2; + __u32 rq_size_log2; +}; + +struct iwch_reg_user_mr_resp { + __u32 pbl_addr; +}; +#endif diff --git a/drivers/infiniband/hw/cxgb3/tcb.h b/drivers/infiniband/hw/cxgb3/tcb.h new file mode 100644 index 000000000000..c702dc199e18 --- /dev/null +++ b/drivers/infiniband/hw/cxgb3/tcb.h @@ -0,0 +1,632 @@ +/* + * Copyright (c) 2007 Chelsio, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _TCB_DEFS_H +#define _TCB_DEFS_H + +#define W_TCB_T_STATE 0 +#define S_TCB_T_STATE 0 +#define M_TCB_T_STATE 0xfULL +#define V_TCB_T_STATE(x) ((x) << S_TCB_T_STATE) + +#define W_TCB_TIMER 0 +#define S_TCB_TIMER 4 +#define M_TCB_TIMER 0x1ULL +#define V_TCB_TIMER(x) ((x) << S_TCB_TIMER) + +#define W_TCB_DACK_TIMER 0 +#define S_TCB_DACK_TIMER 5 +#define M_TCB_DACK_TIMER 0x1ULL +#define V_TCB_DACK_TIMER(x) ((x) << S_TCB_DACK_TIMER) + +#define W_TCB_DEL_FLAG 0 +#define S_TCB_DEL_FLAG 6 +#define M_TCB_DEL_FLAG 0x1ULL +#define V_TCB_DEL_FLAG(x) ((x) << S_TCB_DEL_FLAG) + +#define W_TCB_L2T_IX 0 +#define S_TCB_L2T_IX 7 +#define M_TCB_L2T_IX 0x7ffULL +#define V_TCB_L2T_IX(x) ((x) << S_TCB_L2T_IX) + +#define W_TCB_SMAC_SEL 0 +#define S_TCB_SMAC_SEL 18 +#define M_TCB_SMAC_SEL 0x3ULL +#define V_TCB_SMAC_SEL(x) ((x) << S_TCB_SMAC_SEL) + +#define W_TCB_TOS 0 +#define S_TCB_TOS 20 +#define M_TCB_TOS 0x3fULL +#define V_TCB_TOS(x) ((x) << S_TCB_TOS) + +#define W_TCB_MAX_RT 0 +#define S_TCB_MAX_RT 26 +#define M_TCB_MAX_RT 0xfULL +#define V_TCB_MAX_RT(x) ((x) << S_TCB_MAX_RT) + +#define W_TCB_T_RXTSHIFT 0 +#define S_TCB_T_RXTSHIFT 30 +#define M_TCB_T_RXTSHIFT 0xfULL +#define V_TCB_T_RXTSHIFT(x) ((x) << S_TCB_T_RXTSHIFT) + +#define W_TCB_T_DUPACKS 1 +#define S_TCB_T_DUPACKS 2 +#define M_TCB_T_DUPACKS 0xfULL +#define V_TCB_T_DUPACKS(x) ((x) << S_TCB_T_DUPACKS) + +#define W_TCB_T_MAXSEG 1 +#define S_TCB_T_MAXSEG 6 +#define M_TCB_T_MAXSEG 0xfULL +#define V_TCB_T_MAXSEG(x) ((x) << S_TCB_T_MAXSEG) + +#define W_TCB_T_FLAGS1 1 +#define S_TCB_T_FLAGS1 10 +#define M_TCB_T_FLAGS1 0xffffffffULL +#define V_TCB_T_FLAGS1(x) ((x) << S_TCB_T_FLAGS1) + +#define W_TCB_T_MIGRATION 1 +#define S_TCB_T_MIGRATION 20 +#define M_TCB_T_MIGRATION 0x1ULL +#define V_TCB_T_MIGRATION(x) ((x) << S_TCB_T_MIGRATION) + +#define W_TCB_T_FLAGS2 2 +#define S_TCB_T_FLAGS2 10 +#define M_TCB_T_FLAGS2 0x7fULL +#define V_TCB_T_FLAGS2(x) ((x) << S_TCB_T_FLAGS2) + +#define W_TCB_SND_SCALE 2 +#define S_TCB_SND_SCALE 17 +#define M_TCB_SND_SCALE 0xfULL +#define V_TCB_SND_SCALE(x) ((x) << S_TCB_SND_SCALE) + +#define W_TCB_RCV_SCALE 2 +#define S_TCB_RCV_SCALE 21 +#define M_TCB_RCV_SCALE 0xfULL +#define V_TCB_RCV_SCALE(x) ((x) << S_TCB_RCV_SCALE) + +#define W_TCB_SND_UNA_RAW 2 +#define S_TCB_SND_UNA_RAW 25 +#define M_TCB_SND_UNA_RAW 0x7ffffffULL +#define V_TCB_SND_UNA_RAW(x) ((x) << S_TCB_SND_UNA_RAW) + +#define W_TCB_SND_NXT_RAW 3 +#define S_TCB_SND_NXT_RAW 20 +#define M_TCB_SND_NXT_RAW 0x7ffffffULL +#define V_TCB_SND_NXT_RAW(x) ((x) << S_TCB_SND_NXT_RAW) + +#define W_TCB_RCV_NXT 4 +#define S_TCB_RCV_NXT 15 +#define M_TCB_RCV_NXT 0xffffffffULL +#define V_TCB_RCV_NXT(x) ((x) << S_TCB_RCV_NXT) + +#define W_TCB_RCV_ADV 5 +#define S_TCB_RCV_ADV 15 +#define M_TCB_RCV_ADV 0xffffULL +#define V_TCB_RCV_ADV(x) ((x) << S_TCB_RCV_ADV) + +#define W_TCB_SND_MAX_RAW 5 +#define S_TCB_SND_MAX_RAW 31 +#define M_TCB_SND_MAX_RAW 0x7ffffffULL +#define V_TCB_SND_MAX_RAW(x) ((x) << S_TCB_SND_MAX_RAW) + +#define W_TCB_SND_CWND 6 +#define S_TCB_SND_CWND 26 +#define M_TCB_SND_CWND 0x7ffffffULL +#define V_TCB_SND_CWND(x) ((x) << S_TCB_SND_CWND) + +#define W_TCB_SND_SSTHRESH 7 +#define S_TCB_SND_SSTHRESH 21 +#define M_TCB_SND_SSTHRESH 0x7ffffffULL +#define V_TCB_SND_SSTHRESH(x) ((x) << S_TCB_SND_SSTHRESH) + +#define W_TCB_T_RTT_TS_RECENT_AGE 8 +#define S_TCB_T_RTT_TS_RECENT_AGE 16 +#define M_TCB_T_RTT_TS_RECENT_AGE 0xffffffffULL +#define V_TCB_T_RTT_TS_RECENT_AGE(x) ((x) << S_TCB_T_RTT_TS_RECENT_AGE) + +#define W_TCB_T_RTSEQ_RECENT 9 +#define S_TCB_T_RTSEQ_RECENT 16 +#define M_TCB_T_RTSEQ_RECENT 0xffffffffULL +#define V_TCB_T_RTSEQ_RECENT(x) ((x) << S_TCB_T_RTSEQ_RECENT) + +#define W_TCB_T_SRTT 10 +#define S_TCB_T_SRTT 16 +#define M_TCB_T_SRTT 0xffffULL +#define V_TCB_T_SRTT(x) ((x) << S_TCB_T_SRTT) + +#define W_TCB_T_RTTVAR 11 +#define S_TCB_T_RTTVAR 0 +#define M_TCB_T_RTTVAR 0xffffULL +#define V_TCB_T_RTTVAR(x) ((x) << S_TCB_T_RTTVAR) + +#define W_TCB_TS_LAST_ACK_SENT_RAW 11 +#define S_TCB_TS_LAST_ACK_SENT_RAW 16 +#define M_TCB_TS_LAST_ACK_SENT_RAW 0x7ffffffULL +#define V_TCB_TS_LAST_ACK_SENT_RAW(x) ((x) << S_TCB_TS_LAST_ACK_SENT_RAW) + +#define W_TCB_DIP 12 +#define S_TCB_DIP 11 +#define M_TCB_DIP 0xffffffffULL +#define V_TCB_DIP(x) ((x) << S_TCB_DIP) + +#define W_TCB_SIP 13 +#define S_TCB_SIP 11 +#define M_TCB_SIP 0xffffffffULL +#define V_TCB_SIP(x) ((x) << S_TCB_SIP) + +#define W_TCB_DP 14 +#define S_TCB_DP 11 +#define M_TCB_DP 0xffffULL +#define V_TCB_DP(x) ((x) << S_TCB_DP) + +#define W_TCB_SP 14 +#define S_TCB_SP 27 +#define M_TCB_SP 0xffffULL +#define V_TCB_SP(x) ((x) << S_TCB_SP) + +#define W_TCB_TIMESTAMP 15 +#define S_TCB_TIMESTAMP 11 +#define M_TCB_TIMESTAMP 0xffffffffULL +#define V_TCB_TIMESTAMP(x) ((x) << S_TCB_TIMESTAMP) + +#define W_TCB_TIMESTAMP_OFFSET 16 +#define S_TCB_TIMESTAMP_OFFSET 11 +#define M_TCB_TIMESTAMP_OFFSET 0xfULL +#define V_TCB_TIMESTAMP_OFFSET(x) ((x) << S_TCB_TIMESTAMP_OFFSET) + +#define W_TCB_TX_MAX 16 +#define S_TCB_TX_MAX 15 +#define M_TCB_TX_MAX 0xffffffffULL +#define V_TCB_TX_MAX(x) ((x) << S_TCB_TX_MAX) + +#define W_TCB_TX_HDR_PTR_RAW 17 +#define S_TCB_TX_HDR_PTR_RAW 15 +#define M_TCB_TX_HDR_PTR_RAW 0x1ffffULL +#define V_TCB_TX_HDR_PTR_RAW(x) ((x) << S_TCB_TX_HDR_PTR_RAW) + +#define W_TCB_TX_LAST_PTR_RAW 18 +#define S_TCB_TX_LAST_PTR_RAW 0 +#define M_TCB_TX_LAST_PTR_RAW 0x1ffffULL +#define V_TCB_TX_LAST_PTR_RAW(x) ((x) << S_TCB_TX_LAST_PTR_RAW) + +#define W_TCB_TX_COMPACT 18 +#define S_TCB_TX_COMPACT 17 +#define M_TCB_TX_COMPACT 0x1ULL +#define V_TCB_TX_COMPACT(x) ((x) << S_TCB_TX_COMPACT) + +#define W_TCB_RX_COMPACT 18 +#define S_TCB_RX_COMPACT 18 +#define M_TCB_RX_COMPACT 0x1ULL +#define V_TCB_RX_COMPACT(x) ((x) << S_TCB_RX_COMPACT) + +#define W_TCB_RCV_WND 18 +#define S_TCB_RCV_WND 19 +#define M_TCB_RCV_WND 0x7ffffffULL +#define V_TCB_RCV_WND(x) ((x) << S_TCB_RCV_WND) + +#define W_TCB_RX_HDR_OFFSET 19 +#define S_TCB_RX_HDR_OFFSET 14 +#define M_TCB_RX_HDR_OFFSET 0x7ffffffULL +#define V_TCB_RX_HDR_OFFSET(x) ((x) << S_TCB_RX_HDR_OFFSET) + +#define W_TCB_RX_FRAG0_START_IDX_RAW 20 +#define S_TCB_RX_FRAG0_START_IDX_RAW 9 +#define M_TCB_RX_FRAG0_START_IDX_RAW 0x7ffffffULL +#define V_TCB_RX_FRAG0_START_IDX_RAW(x) ((x) << S_TCB_RX_FRAG0_START_IDX_RAW) + +#define W_TCB_RX_FRAG1_START_IDX_OFFSET 21 +#define S_TCB_RX_FRAG1_START_IDX_OFFSET 4 +#define M_TCB_RX_FRAG1_START_IDX_OFFSET 0x7ffffffULL +#define V_TCB_RX_FRAG1_START_IDX_OFFSET(x) ((x) << S_TCB_RX_FRAG1_START_IDX_OFFSET) + +#define W_TCB_RX_FRAG0_LEN 21 +#define S_TCB_RX_FRAG0_LEN 31 +#define M_TCB_RX_FRAG0_LEN 0x7ffffffULL +#define V_TCB_RX_FRAG0_LEN(x) ((x) << S_TCB_RX_FRAG0_LEN) + +#define W_TCB_RX_FRAG1_LEN 22 +#define S_TCB_RX_FRAG1_LEN 26 +#define M_TCB_RX_FRAG1_LEN 0x7ffffffULL +#define V_TCB_RX_FRAG1_LEN(x) ((x) << S_TCB_RX_FRAG1_LEN) + +#define W_TCB_NEWRENO_RECOVER 23 +#define S_TCB_NEWRENO_RECOVER 21 +#define M_TCB_NEWRENO_RECOVER 0x7ffffffULL +#define V_TCB_NEWRENO_RECOVER(x) ((x) << S_TCB_NEWRENO_RECOVER) + +#define W_TCB_PDU_HAVE_LEN 24 +#define S_TCB_PDU_HAVE_LEN 16 +#define M_TCB_PDU_HAVE_LEN 0x1ULL +#define V_TCB_PDU_HAVE_LEN(x) ((x) << S_TCB_PDU_HAVE_LEN) + +#define W_TCB_PDU_LEN 24 +#define S_TCB_PDU_LEN 17 +#define M_TCB_PDU_LEN 0xffffULL +#define V_TCB_PDU_LEN(x) ((x) << S_TCB_PDU_LEN) + +#define W_TCB_RX_QUIESCE 25 +#define S_TCB_RX_QUIESCE 1 +#define M_TCB_RX_QUIESCE 0x1ULL +#define V_TCB_RX_QUIESCE(x) ((x) << S_TCB_RX_QUIESCE) + +#define W_TCB_RX_PTR_RAW 25 +#define S_TCB_RX_PTR_RAW 2 +#define M_TCB_RX_PTR_RAW 0x1ffffULL +#define V_TCB_RX_PTR_RAW(x) ((x) << S_TCB_RX_PTR_RAW) + +#define W_TCB_CPU_NO 25 +#define S_TCB_CPU_NO 19 +#define M_TCB_CPU_NO 0x7fULL +#define V_TCB_CPU_NO(x) ((x) << S_TCB_CPU_NO) + +#define W_TCB_ULP_TYPE 25 +#define S_TCB_ULP_TYPE 26 +#define M_TCB_ULP_TYPE 0xfULL +#define V_TCB_ULP_TYPE(x) ((x) << S_TCB_ULP_TYPE) + +#define W_TCB_RX_FRAG1_PTR_RAW 25 +#define S_TCB_RX_FRAG1_PTR_RAW 30 +#define M_TCB_RX_FRAG1_PTR_RAW 0x1ffffULL +#define V_TCB_RX_FRAG1_PTR_RAW(x) ((x) << S_TCB_RX_FRAG1_PTR_RAW) + +#define W_TCB_RX_FRAG2_START_IDX_OFFSET_RAW 26 +#define S_TCB_RX_FRAG2_START_IDX_OFFSET_RAW 15 +#define M_TCB_RX_FRAG2_START_IDX_OFFSET_RAW 0x7ffffffULL +#define V_TCB_RX_FRAG2_START_IDX_OFFSET_RAW(x) ((x) << S_TCB_RX_FRAG2_START_IDX_OFFSET_RAW) + +#define W_TCB_RX_FRAG2_PTR_RAW 27 +#define S_TCB_RX_FRAG2_PTR_RAW 10 +#define M_TCB_RX_FRAG2_PTR_RAW 0x1ffffULL +#define V_TCB_RX_FRAG2_PTR_RAW(x) ((x) << S_TCB_RX_FRAG2_PTR_RAW) + +#define W_TCB_RX_FRAG2_LEN_RAW 27 +#define S_TCB_RX_FRAG2_LEN_RAW 27 +#define M_TCB_RX_FRAG2_LEN_RAW 0x7ffffffULL +#define V_TCB_RX_FRAG2_LEN_RAW(x) ((x) << S_TCB_RX_FRAG2_LEN_RAW) + +#define W_TCB_RX_FRAG3_PTR_RAW 28 +#define S_TCB_RX_FRAG3_PTR_RAW 22 +#define M_TCB_RX_FRAG3_PTR_RAW 0x1ffffULL +#define V_TCB_RX_FRAG3_PTR_RAW(x) ((x) << S_TCB_RX_FRAG3_PTR_RAW) + +#define W_TCB_RX_FRAG3_LEN_RAW 29 +#define S_TCB_RX_FRAG3_LEN_RAW 7 +#define M_TCB_RX_FRAG3_LEN_RAW 0x7ffffffULL +#define V_TCB_RX_FRAG3_LEN_RAW(x) ((x) << S_TCB_RX_FRAG3_LEN_RAW) + +#define W_TCB_RX_FRAG3_START_IDX_OFFSET_RAW 30 +#define S_TCB_RX_FRAG3_START_IDX_OFFSET_RAW 2 +#define M_TCB_RX_FRAG3_START_IDX_OFFSET_RAW 0x7ffffffULL +#define V_TCB_RX_FRAG3_START_IDX_OFFSET_RAW(x) ((x) << S_TCB_RX_FRAG3_START_IDX_OFFSET_RAW) + +#define W_TCB_PDU_HDR_LEN 30 +#define S_TCB_PDU_HDR_LEN 29 +#define M_TCB_PDU_HDR_LEN 0xffULL +#define V_TCB_PDU_HDR_LEN(x) ((x) << S_TCB_PDU_HDR_LEN) + +#define W_TCB_SLUSH1 31 +#define S_TCB_SLUSH1 5 +#define M_TCB_SLUSH1 0x7ffffULL +#define V_TCB_SLUSH1(x) ((x) << S_TCB_SLUSH1) + +#define W_TCB_ULP_RAW 31 +#define S_TCB_ULP_RAW 24 +#define M_TCB_ULP_RAW 0xffULL +#define V_TCB_ULP_RAW(x) ((x) << S_TCB_ULP_RAW) + +#define W_TCB_DDP_RDMAP_VERSION 25 +#define S_TCB_DDP_RDMAP_VERSION 30 +#define M_TCB_DDP_RDMAP_VERSION 0x1ULL +#define V_TCB_DDP_RDMAP_VERSION(x) ((x) << S_TCB_DDP_RDMAP_VERSION) + +#define W_TCB_MARKER_ENABLE_RX 25 +#define S_TCB_MARKER_ENABLE_RX 31 +#define M_TCB_MARKER_ENABLE_RX 0x1ULL +#define V_TCB_MARKER_ENABLE_RX(x) ((x) << S_TCB_MARKER_ENABLE_RX) + +#define W_TCB_MARKER_ENABLE_TX 26 +#define S_TCB_MARKER_ENABLE_TX 0 +#define M_TCB_MARKER_ENABLE_TX 0x1ULL +#define V_TCB_MARKER_ENABLE_TX(x) ((x) << S_TCB_MARKER_ENABLE_TX) + +#define W_TCB_CRC_ENABLE 26 +#define S_TCB_CRC_ENABLE 1 +#define M_TCB_CRC_ENABLE 0x1ULL +#define V_TCB_CRC_ENABLE(x) ((x) << S_TCB_CRC_ENABLE) + +#define W_TCB_IRS_ULP 26 +#define S_TCB_IRS_ULP 2 +#define M_TCB_IRS_ULP 0x1ffULL +#define V_TCB_IRS_ULP(x) ((x) << S_TCB_IRS_ULP) + +#define W_TCB_ISS_ULP 26 +#define S_TCB_ISS_ULP 11 +#define M_TCB_ISS_ULP 0x1ffULL +#define V_TCB_ISS_ULP(x) ((x) << S_TCB_ISS_ULP) + +#define W_TCB_TX_PDU_LEN 26 +#define S_TCB_TX_PDU_LEN 20 +#define M_TCB_TX_PDU_LEN 0x3fffULL +#define V_TCB_TX_PDU_LEN(x) ((x) << S_TCB_TX_PDU_LEN) + +#define W_TCB_TX_PDU_OUT 27 +#define S_TCB_TX_PDU_OUT 2 +#define M_TCB_TX_PDU_OUT 0x1ULL +#define V_TCB_TX_PDU_OUT(x) ((x) << S_TCB_TX_PDU_OUT) + +#define W_TCB_CQ_IDX_SQ 27 +#define S_TCB_CQ_IDX_SQ 3 +#define M_TCB_CQ_IDX_SQ 0xffffULL +#define V_TCB_CQ_IDX_SQ(x) ((x) << S_TCB_CQ_IDX_SQ) + +#define W_TCB_CQ_IDX_RQ 27 +#define S_TCB_CQ_IDX_RQ 19 +#define M_TCB_CQ_IDX_RQ 0xffffULL +#define V_TCB_CQ_IDX_RQ(x) ((x) << S_TCB_CQ_IDX_RQ) + +#define W_TCB_QP_ID 28 +#define S_TCB_QP_ID 3 +#define M_TCB_QP_ID 0xffffULL +#define V_TCB_QP_ID(x) ((x) << S_TCB_QP_ID) + +#define W_TCB_PD_ID 28 +#define S_TCB_PD_ID 19 +#define M_TCB_PD_ID 0xffffULL +#define V_TCB_PD_ID(x) ((x) << S_TCB_PD_ID) + +#define W_TCB_STAG 29 +#define S_TCB_STAG 3 +#define M_TCB_STAG 0xffffffffULL +#define V_TCB_STAG(x) ((x) << S_TCB_STAG) + +#define W_TCB_RQ_START 30 +#define S_TCB_RQ_START 3 +#define M_TCB_RQ_START 0x3ffffffULL +#define V_TCB_RQ_START(x) ((x) << S_TCB_RQ_START) + +#define W_TCB_RQ_MSN 30 +#define S_TCB_RQ_MSN 29 +#define M_TCB_RQ_MSN 0x3ffULL +#define V_TCB_RQ_MSN(x) ((x) << S_TCB_RQ_MSN) + +#define W_TCB_RQ_MAX_OFFSET 31 +#define S_TCB_RQ_MAX_OFFSET 7 +#define M_TCB_RQ_MAX_OFFSET 0xfULL +#define V_TCB_RQ_MAX_OFFSET(x) ((x) << S_TCB_RQ_MAX_OFFSET) + +#define W_TCB_RQ_WRITE_PTR 31 +#define S_TCB_RQ_WRITE_PTR 11 +#define M_TCB_RQ_WRITE_PTR 0x3ffULL +#define V_TCB_RQ_WRITE_PTR(x) ((x) << S_TCB_RQ_WRITE_PTR) + +#define W_TCB_INB_WRITE_PERM 31 +#define S_TCB_INB_WRITE_PERM 21 +#define M_TCB_INB_WRITE_PERM 0x1ULL +#define V_TCB_INB_WRITE_PERM(x) ((x) << S_TCB_INB_WRITE_PERM) + +#define W_TCB_INB_READ_PERM 31 +#define S_TCB_INB_READ_PERM 22 +#define M_TCB_INB_READ_PERM 0x1ULL +#define V_TCB_INB_READ_PERM(x) ((x) << S_TCB_INB_READ_PERM) + +#define W_TCB_ORD_L_BIT_VLD 31 +#define S_TCB_ORD_L_BIT_VLD 23 +#define M_TCB_ORD_L_BIT_VLD 0x1ULL +#define V_TCB_ORD_L_BIT_VLD(x) ((x) << S_TCB_ORD_L_BIT_VLD) + +#define W_TCB_RDMAP_OPCODE 31 +#define S_TCB_RDMAP_OPCODE 24 +#define M_TCB_RDMAP_OPCODE 0xfULL +#define V_TCB_RDMAP_OPCODE(x) ((x) << S_TCB_RDMAP_OPCODE) + +#define W_TCB_TX_FLUSH 31 +#define S_TCB_TX_FLUSH 28 +#define M_TCB_TX_FLUSH 0x1ULL +#define V_TCB_TX_FLUSH(x) ((x) << S_TCB_TX_FLUSH) + +#define W_TCB_TX_OOS_RXMT 31 +#define S_TCB_TX_OOS_RXMT 29 +#define M_TCB_TX_OOS_RXMT 0x1ULL +#define V_TCB_TX_OOS_RXMT(x) ((x) << S_TCB_TX_OOS_RXMT) + +#define W_TCB_TX_OOS_TXMT 31 +#define S_TCB_TX_OOS_TXMT 30 +#define M_TCB_TX_OOS_TXMT 0x1ULL +#define V_TCB_TX_OOS_TXMT(x) ((x) << S_TCB_TX_OOS_TXMT) + +#define W_TCB_SLUSH_AUX2 31 +#define S_TCB_SLUSH_AUX2 31 +#define M_TCB_SLUSH_AUX2 0x1ULL +#define V_TCB_SLUSH_AUX2(x) ((x) << S_TCB_SLUSH_AUX2) + +#define W_TCB_RX_FRAG1_PTR_RAW2 25 +#define S_TCB_RX_FRAG1_PTR_RAW2 30 +#define M_TCB_RX_FRAG1_PTR_RAW2 0x1ffffULL +#define V_TCB_RX_FRAG1_PTR_RAW2(x) ((x) << S_TCB_RX_FRAG1_PTR_RAW2) + +#define W_TCB_RX_DDP_FLAGS 26 +#define S_TCB_RX_DDP_FLAGS 15 +#define M_TCB_RX_DDP_FLAGS 0x3ffULL +#define V_TCB_RX_DDP_FLAGS(x) ((x) << S_TCB_RX_DDP_FLAGS) + +#define W_TCB_SLUSH_AUX3 26 +#define S_TCB_SLUSH_AUX3 31 +#define M_TCB_SLUSH_AUX3 0x1ffULL +#define V_TCB_SLUSH_AUX3(x) ((x) << S_TCB_SLUSH_AUX3) + +#define W_TCB_RX_DDP_BUF0_OFFSET 27 +#define S_TCB_RX_DDP_BUF0_OFFSET 8 +#define M_TCB_RX_DDP_BUF0_OFFSET 0x3fffffULL +#define V_TCB_RX_DDP_BUF0_OFFSET(x) ((x) << S_TCB_RX_DDP_BUF0_OFFSET) + +#define W_TCB_RX_DDP_BUF0_LEN 27 +#define S_TCB_RX_DDP_BUF0_LEN 30 +#define M_TCB_RX_DDP_BUF0_LEN 0x3fffffULL +#define V_TCB_RX_DDP_BUF0_LEN(x) ((x) << S_TCB_RX_DDP_BUF0_LEN) + +#define W_TCB_RX_DDP_BUF1_OFFSET 28 +#define S_TCB_RX_DDP_BUF1_OFFSET 20 +#define M_TCB_RX_DDP_BUF1_OFFSET 0x3fffffULL +#define V_TCB_RX_DDP_BUF1_OFFSET(x) ((x) << S_TCB_RX_DDP_BUF1_OFFSET) + +#define W_TCB_RX_DDP_BUF1_LEN 29 +#define S_TCB_RX_DDP_BUF1_LEN 10 +#define M_TCB_RX_DDP_BUF1_LEN 0x3fffffULL +#define V_TCB_RX_DDP_BUF1_LEN(x) ((x) << S_TCB_RX_DDP_BUF1_LEN) + +#define W_TCB_RX_DDP_BUF0_TAG 30 +#define S_TCB_RX_DDP_BUF0_TAG 0 +#define M_TCB_RX_DDP_BUF0_TAG 0xffffffffULL +#define V_TCB_RX_DDP_BUF0_TAG(x) ((x) << S_TCB_RX_DDP_BUF0_TAG) + +#define W_TCB_RX_DDP_BUF1_TAG 31 +#define S_TCB_RX_DDP_BUF1_TAG 0 +#define M_TCB_RX_DDP_BUF1_TAG 0xffffffffULL +#define V_TCB_RX_DDP_BUF1_TAG(x) ((x) << S_TCB_RX_DDP_BUF1_TAG) + +#define S_TF_DACK 10 +#define V_TF_DACK(x) ((x) << S_TF_DACK) + +#define S_TF_NAGLE 11 +#define V_TF_NAGLE(x) ((x) << S_TF_NAGLE) + +#define S_TF_RECV_SCALE 12 +#define V_TF_RECV_SCALE(x) ((x) << S_TF_RECV_SCALE) + +#define S_TF_RECV_TSTMP 13 +#define V_TF_RECV_TSTMP(x) ((x) << S_TF_RECV_TSTMP) + +#define S_TF_RECV_SACK 14 +#define V_TF_RECV_SACK(x) ((x) << S_TF_RECV_SACK) + +#define S_TF_TURBO 15 +#define V_TF_TURBO(x) ((x) << S_TF_TURBO) + +#define S_TF_KEEPALIVE 16 +#define V_TF_KEEPALIVE(x) ((x) << S_TF_KEEPALIVE) + +#define S_TF_TCAM_BYPASS 17 +#define V_TF_TCAM_BYPASS(x) ((x) << S_TF_TCAM_BYPASS) + +#define S_TF_CORE_FIN 18 +#define V_TF_CORE_FIN(x) ((x) << S_TF_CORE_FIN) + +#define S_TF_CORE_MORE 19 +#define V_TF_CORE_MORE(x) ((x) << S_TF_CORE_MORE) + +#define S_TF_MIGRATING 20 +#define V_TF_MIGRATING(x) ((x) << S_TF_MIGRATING) + +#define S_TF_ACTIVE_OPEN 21 +#define V_TF_ACTIVE_OPEN(x) ((x) << S_TF_ACTIVE_OPEN) + +#define S_TF_ASK_MODE 22 +#define V_TF_ASK_MODE(x) ((x) << S_TF_ASK_MODE) + +#define S_TF_NON_OFFLOAD 23 +#define V_TF_NON_OFFLOAD(x) ((x) << S_TF_NON_OFFLOAD) + +#define S_TF_MOD_SCHD 24 +#define V_TF_MOD_SCHD(x) ((x) << S_TF_MOD_SCHD) + +#define S_TF_MOD_SCHD_REASON0 25 +#define V_TF_MOD_SCHD_REASON0(x) ((x) << S_TF_MOD_SCHD_REASON0) + +#define S_TF_MOD_SCHD_REASON1 26 +#define V_TF_MOD_SCHD_REASON1(x) ((x) << S_TF_MOD_SCHD_REASON1) + +#define S_TF_MOD_SCHD_RX 27 +#define V_TF_MOD_SCHD_RX(x) ((x) << S_TF_MOD_SCHD_RX) + +#define S_TF_CORE_PUSH 28 +#define V_TF_CORE_PUSH(x) ((x) << S_TF_CORE_PUSH) + +#define S_TF_RCV_COALESCE_ENABLE 29 +#define V_TF_RCV_COALESCE_ENABLE(x) ((x) << S_TF_RCV_COALESCE_ENABLE) + +#define S_TF_RCV_COALESCE_PUSH 30 +#define V_TF_RCV_COALESCE_PUSH(x) ((x) << S_TF_RCV_COALESCE_PUSH) + +#define S_TF_RCV_COALESCE_LAST_PSH 31 +#define V_TF_RCV_COALESCE_LAST_PSH(x) ((x) << S_TF_RCV_COALESCE_LAST_PSH) + +#define S_TF_RCV_COALESCE_HEARTBEAT 32 +#define V_TF_RCV_COALESCE_HEARTBEAT(x) ((x) << S_TF_RCV_COALESCE_HEARTBEAT) + +#define S_TF_HALF_CLOSE 33 +#define V_TF_HALF_CLOSE(x) ((x) << S_TF_HALF_CLOSE) + +#define S_TF_DACK_MSS 34 +#define V_TF_DACK_MSS(x) ((x) << S_TF_DACK_MSS) + +#define S_TF_CCTRL_SEL0 35 +#define V_TF_CCTRL_SEL0(x) ((x) << S_TF_CCTRL_SEL0) + +#define S_TF_CCTRL_SEL1 36 +#define V_TF_CCTRL_SEL1(x) ((x) << S_TF_CCTRL_SEL1) + +#define S_TF_TCP_NEWRENO_FAST_RECOVERY 37 +#define V_TF_TCP_NEWRENO_FAST_RECOVERY(x) ((x) << S_TF_TCP_NEWRENO_FAST_RECOVERY) + +#define S_TF_TX_PACE_AUTO 38 +#define V_TF_TX_PACE_AUTO(x) ((x) << S_TF_TX_PACE_AUTO) + +#define S_TF_PEER_FIN_HELD 39 +#define V_TF_PEER_FIN_HELD(x) ((x) << S_TF_PEER_FIN_HELD) + +#define S_TF_CORE_URG 40 +#define V_TF_CORE_URG(x) ((x) << S_TF_CORE_URG) + +#define S_TF_RDMA_ERROR 41 +#define V_TF_RDMA_ERROR(x) ((x) << S_TF_RDMA_ERROR) + +#define S_TF_SSWS_DISABLED 42 +#define V_TF_SSWS_DISABLED(x) ((x) << S_TF_SSWS_DISABLED) + +#define S_TF_DUPACK_COUNT_ODD 43 +#define V_TF_DUPACK_COUNT_ODD(x) ((x) << S_TF_DUPACK_COUNT_ODD) + +#define S_TF_TX_CHANNEL 44 +#define V_TF_TX_CHANNEL(x) ((x) << S_TF_TX_CHANNEL) + +#define S_TF_RX_CHANNEL 45 +#define V_TF_RX_CHANNEL(x) ((x) << S_TF_RX_CHANNEL) + +#define S_TF_TX_PACE_FIXED 46 +#define V_TF_TX_PACE_FIXED(x) ((x) << S_TF_TX_PACE_FIXED) + +#define S_TF_RDMA_FLM_ERROR 47 +#define V_TF_RDMA_FLM_ERROR(x) ((x) << S_TF_RDMA_FLM_ERROR) + +#define S_TF_RX_FLOW_CONTROL_DISABLE 48 +#define V_TF_RX_FLOW_CONTROL_DISABLE(x) ((x) << S_TF_RX_FLOW_CONTROL_DISABLE) + +#endif /* _TCB_DEFS_H */ -- cgit v1.2.2 From c7d204e8fdf02f88d91707213f473805bcfb977b Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 10 Feb 2007 23:17:26 +0200 Subject: IB/mthca: Fix reserved MTTs calculation on mem-free HCAs The reserved_mtts field has different meaning in Tavor and Arbel, so we are wasting mtt entries on memfree. Fix the Arbel case to match Tavor semantics. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_cmd.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index 968d1519761c..71314460b11e 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -1051,7 +1051,11 @@ int mthca_QUERY_DEV_LIM(struct mthca_dev *dev, MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_EQ_OFFSET); dev_lim->max_eqs = 1 << (field & 0x7); MTHCA_GET(field, outbox, QUERY_DEV_LIM_RSVD_MTT_OFFSET); - dev_lim->reserved_mtts = 1 << (field >> 4); + if (mthca_is_memfree(dev)) + dev_lim->reserved_mtts = ALIGN((1 << (field >> 4)) * sizeof(u64), + MTHCA_MTT_SEG_SIZE) / MTHCA_MTT_SEG_SIZE; + else + dev_lim->reserved_mtts = 1 << (field >> 4); MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_MRW_SZ_OFFSET); dev_lim->max_mrw_sz = 1 << field; MTHCA_GET(field, outbox, QUERY_DEV_LIM_RSVD_MRW_OFFSET); -- cgit v1.2.2 From 1d1f19cfce7687b557cebdc41bf8a5eeba8a9882 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 10 Feb 2007 23:17:26 +0200 Subject: IB/mthca: Give reserved MTTs a separate cache line MTTs are allocated in non-cache-coherent memory, so we must give reserved MTTs their own cache line, to prevent both device and CPU from writing into the same cache line at the same time. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 44bc6cc734ab..9a9dd32885a0 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -464,6 +464,10 @@ static int mthca_init_icm(struct mthca_dev *mdev, goto err_unmap_aux; } + /* CPU writes to non-reserved MTTs, while HCA might DMA to reserved mtts */ + mdev->limits.reserved_mtts = ALIGN(mdev->limits.reserved_mtts * MTHCA_MTT_SEG_SIZE, + dma_get_cache_alignment()) / MTHCA_MTT_SEG_SIZE; + mdev->mr_table.mtt_table = mthca_alloc_icm_table(mdev, init_hca->mtt_base, MTHCA_MTT_SEG_SIZE, mdev->limits.num_mtt_segs, -- cgit v1.2.2 From 391e4dea7189eef32b0c2d121e7e047110c1b83c Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 10 Feb 2007 23:15:08 +0200 Subject: IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_main.c | 36 ++++---- drivers/infiniband/hw/mthca/mthca_memfree.c | 127 +++++++++++++++++++++------ drivers/infiniband/hw/mthca/mthca_memfree.h | 9 +- drivers/infiniband/hw/mthca/mthca_mr.c | 8 +- drivers/infiniband/hw/mthca/mthca_provider.h | 1 + 5 files changed, 131 insertions(+), 50 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 9a9dd32885a0..0d9b7d06bbc2 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -379,7 +379,7 @@ static int mthca_load_fw(struct mthca_dev *mdev) mdev->fw.arbel.fw_icm = mthca_alloc_icm(mdev, mdev->fw.arbel.fw_pages, - GFP_HIGHUSER | __GFP_NOWARN); + GFP_HIGHUSER | __GFP_NOWARN, 0); if (!mdev->fw.arbel.fw_icm) { mthca_err(mdev, "Couldn't allocate FW area, aborting.\n"); return -ENOMEM; @@ -412,7 +412,7 @@ err_unmap_fa: mthca_UNMAP_FA(mdev, &status); err_free: - mthca_free_icm(mdev, mdev->fw.arbel.fw_icm); + mthca_free_icm(mdev, mdev->fw.arbel.fw_icm, 0); return err; } @@ -441,7 +441,7 @@ static int mthca_init_icm(struct mthca_dev *mdev, (unsigned long long) aux_pages << 2); mdev->fw.arbel.aux_icm = mthca_alloc_icm(mdev, aux_pages, - GFP_HIGHUSER | __GFP_NOWARN); + GFP_HIGHUSER | __GFP_NOWARN, 0); if (!mdev->fw.arbel.aux_icm) { mthca_err(mdev, "Couldn't allocate aux memory, aborting.\n"); return -ENOMEM; @@ -471,7 +471,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->mr_table.mtt_table = mthca_alloc_icm_table(mdev, init_hca->mtt_base, MTHCA_MTT_SEG_SIZE, mdev->limits.num_mtt_segs, - mdev->limits.reserved_mtts, 1); + mdev->limits.reserved_mtts, + 1, 0); if (!mdev->mr_table.mtt_table) { mthca_err(mdev, "Failed to map MTT context memory, aborting.\n"); err = -ENOMEM; @@ -481,7 +482,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->mr_table.mpt_table = mthca_alloc_icm_table(mdev, init_hca->mpt_base, dev_lim->mpt_entry_sz, mdev->limits.num_mpts, - mdev->limits.reserved_mrws, 1); + mdev->limits.reserved_mrws, + 1, 1); if (!mdev->mr_table.mpt_table) { mthca_err(mdev, "Failed to map MPT context memory, aborting.\n"); err = -ENOMEM; @@ -491,7 +493,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->qp_table.qp_table = mthca_alloc_icm_table(mdev, init_hca->qpc_base, dev_lim->qpc_entry_sz, mdev->limits.num_qps, - mdev->limits.reserved_qps, 0); + mdev->limits.reserved_qps, + 0, 0); if (!mdev->qp_table.qp_table) { mthca_err(mdev, "Failed to map QP context memory, aborting.\n"); err = -ENOMEM; @@ -501,7 +504,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->qp_table.eqp_table = mthca_alloc_icm_table(mdev, init_hca->eqpc_base, dev_lim->eqpc_entry_sz, mdev->limits.num_qps, - mdev->limits.reserved_qps, 0); + mdev->limits.reserved_qps, + 0, 0); if (!mdev->qp_table.eqp_table) { mthca_err(mdev, "Failed to map EQP context memory, aborting.\n"); err = -ENOMEM; @@ -511,7 +515,7 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->qp_table.rdb_table = mthca_alloc_icm_table(mdev, init_hca->rdb_base, MTHCA_RDB_ENTRY_SIZE, mdev->limits.num_qps << - mdev->qp_table.rdb_shift, + mdev->qp_table.rdb_shift, 0, 0, 0); if (!mdev->qp_table.rdb_table) { mthca_err(mdev, "Failed to map RDB context memory, aborting\n"); @@ -522,7 +526,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->cq_table.table = mthca_alloc_icm_table(mdev, init_hca->cqc_base, dev_lim->cqc_entry_sz, mdev->limits.num_cqs, - mdev->limits.reserved_cqs, 0); + mdev->limits.reserved_cqs, + 0, 0); if (!mdev->cq_table.table) { mthca_err(mdev, "Failed to map CQ context memory, aborting.\n"); err = -ENOMEM; @@ -534,7 +539,8 @@ static int mthca_init_icm(struct mthca_dev *mdev, mthca_alloc_icm_table(mdev, init_hca->srqc_base, dev_lim->srq_entry_sz, mdev->limits.num_srqs, - mdev->limits.reserved_srqs, 0); + mdev->limits.reserved_srqs, + 0, 0); if (!mdev->srq_table.table) { mthca_err(mdev, "Failed to map SRQ context memory, " "aborting.\n"); @@ -554,7 +560,7 @@ static int mthca_init_icm(struct mthca_dev *mdev, mdev->limits.num_amgms, mdev->limits.num_mgms + mdev->limits.num_amgms, - 0); + 0, 0); if (!mdev->mcg_table.table) { mthca_err(mdev, "Failed to map MCG context memory, aborting.\n"); err = -ENOMEM; @@ -592,7 +598,7 @@ err_unmap_aux: mthca_UNMAP_ICM_AUX(mdev, &status); err_free_aux: - mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); + mthca_free_icm(mdev, mdev->fw.arbel.aux_icm, 0); return err; } @@ -613,7 +619,7 @@ static void mthca_free_icms(struct mthca_dev *mdev) mthca_unmap_eq_icm(mdev); mthca_UNMAP_ICM_AUX(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); + mthca_free_icm(mdev, mdev->fw.arbel.aux_icm, 0); } static int mthca_init_arbel(struct mthca_dev *mdev) @@ -697,7 +703,7 @@ err_free_icm: err_stop_fw: mthca_UNMAP_FA(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.fw_icm); + mthca_free_icm(mdev, mdev->fw.arbel.fw_icm, 0); err_disable: if (!(mdev->mthca_flags & MTHCA_FLAG_NO_LAM)) @@ -716,7 +722,7 @@ static void mthca_close_hca(struct mthca_dev *mdev) mthca_free_icms(mdev); mthca_UNMAP_FA(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.fw_icm); + mthca_free_icm(mdev, mdev->fw.arbel.fw_icm, 0); if (!(mdev->mthca_flags & MTHCA_FLAG_NO_LAM)) mthca_DISABLE_LAM(mdev, &status); diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index 6b19645d946c..0b9d053a599d 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -35,6 +35,9 @@ */ #include +#include + +#include #include "mthca_memfree.h" #include "mthca_dev.h" @@ -58,22 +61,42 @@ struct mthca_user_db_table { } page[0]; }; -void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm) +static void mthca_free_icm_pages(struct mthca_dev *dev, struct mthca_icm_chunk *chunk) +{ + int i; + + if (chunk->nsg > 0) + pci_unmap_sg(dev->pdev, chunk->mem, chunk->npages, + PCI_DMA_BIDIRECTIONAL); + + for (i = 0; i < chunk->npages; ++i) + __free_pages(chunk->mem[i].page, + get_order(chunk->mem[i].length)); +} + +static void mthca_free_icm_coherent(struct mthca_dev *dev, struct mthca_icm_chunk *chunk) { - struct mthca_icm_chunk *chunk, *tmp; int i; + for (i = 0; i < chunk->npages; ++i) { + dma_free_coherent(&dev->pdev->dev, chunk->mem[i].length, + lowmem_page_address(chunk->mem[i].page), + sg_dma_address(&chunk->mem[i])); + } +} + +void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm, int coherent) +{ + struct mthca_icm_chunk *chunk, *tmp; + if (!icm) return; list_for_each_entry_safe(chunk, tmp, &icm->chunk_list, list) { - if (chunk->nsg > 0) - pci_unmap_sg(dev->pdev, chunk->mem, chunk->npages, - PCI_DMA_BIDIRECTIONAL); - - for (i = 0; i < chunk->npages; ++i) - __free_pages(chunk->mem[i].page, - get_order(chunk->mem[i].length)); + if (coherent) + mthca_free_icm_coherent(dev, chunk); + else + mthca_free_icm_pages(dev, chunk); kfree(chunk); } @@ -81,12 +104,41 @@ void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm) kfree(icm); } +static int mthca_alloc_icm_pages(struct scatterlist *mem, int order, gfp_t gfp_mask) +{ + mem->page = alloc_pages(gfp_mask, order); + if (!mem->page) + return -ENOMEM; + + mem->length = PAGE_SIZE << order; + mem->offset = 0; + return 0; +} + +static int mthca_alloc_icm_coherent(struct device *dev, struct scatterlist *mem, + int order, gfp_t gfp_mask) +{ + void *buf = dma_alloc_coherent(dev, PAGE_SIZE << order, &sg_dma_address(mem), + gfp_mask); + if (!buf) + return -ENOMEM; + + sg_set_buf(mem, buf, PAGE_SIZE << order); + BUG_ON(mem->offset); + sg_dma_len(mem) = PAGE_SIZE << order; + return 0; +} + struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, - gfp_t gfp_mask) + gfp_t gfp_mask, int coherent) { struct mthca_icm *icm; struct mthca_icm_chunk *chunk = NULL; int cur_order; + int ret; + + /* We use sg_set_buf for coherent allocs, which assumes low memory */ + BUG_ON(coherent && (gfp_mask & __GFP_HIGHMEM)); icm = kmalloc(sizeof *icm, gfp_mask & ~(__GFP_HIGHMEM | __GFP_NOWARN)); if (!icm) @@ -112,21 +164,28 @@ struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, while (1 << cur_order > npages) --cur_order; - chunk->mem[chunk->npages].page = alloc_pages(gfp_mask, cur_order); - if (chunk->mem[chunk->npages].page) { - chunk->mem[chunk->npages].length = PAGE_SIZE << cur_order; - chunk->mem[chunk->npages].offset = 0; + if (coherent) + ret = mthca_alloc_icm_coherent(&dev->pdev->dev, + &chunk->mem[chunk->npages], + cur_order, gfp_mask); + else + ret = mthca_alloc_icm_pages(&chunk->mem[chunk->npages], + cur_order, gfp_mask); - if (++chunk->npages == MTHCA_ICM_CHUNK_LEN) { + if (!ret) { + ++chunk->npages; + + if (!coherent && chunk->npages == MTHCA_ICM_CHUNK_LEN) { chunk->nsg = pci_map_sg(dev->pdev, chunk->mem, chunk->npages, PCI_DMA_BIDIRECTIONAL); if (chunk->nsg <= 0) goto fail; + } + if (chunk->npages == MTHCA_ICM_CHUNK_LEN) chunk = NULL; - } npages -= 1 << cur_order; } else { @@ -136,7 +195,7 @@ struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, } } - if (chunk) { + if (!coherent && chunk) { chunk->nsg = pci_map_sg(dev->pdev, chunk->mem, chunk->npages, PCI_DMA_BIDIRECTIONAL); @@ -148,7 +207,7 @@ struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, return icm; fail: - mthca_free_icm(dev, icm); + mthca_free_icm(dev, icm, coherent); return NULL; } @@ -167,7 +226,7 @@ int mthca_table_get(struct mthca_dev *dev, struct mthca_icm_table *table, int ob table->icm[i] = mthca_alloc_icm(dev, MTHCA_TABLE_CHUNK_SIZE >> PAGE_SHIFT, (table->lowmem ? GFP_KERNEL : GFP_HIGHUSER) | - __GFP_NOWARN); + __GFP_NOWARN, table->coherent); if (!table->icm[i]) { ret = -ENOMEM; goto out; @@ -175,7 +234,7 @@ int mthca_table_get(struct mthca_dev *dev, struct mthca_icm_table *table, int ob if (mthca_MAP_ICM(dev, table->icm[i], table->virt + i * MTHCA_TABLE_CHUNK_SIZE, &status) || status) { - mthca_free_icm(dev, table->icm[i]); + mthca_free_icm(dev, table->icm[i], table->coherent); table->icm[i] = NULL; ret = -ENOMEM; goto out; @@ -204,16 +263,16 @@ void mthca_table_put(struct mthca_dev *dev, struct mthca_icm_table *table, int o mthca_UNMAP_ICM(dev, table->virt + i * MTHCA_TABLE_CHUNK_SIZE, MTHCA_TABLE_CHUNK_SIZE / MTHCA_ICM_PAGE_SIZE, &status); - mthca_free_icm(dev, table->icm[i]); + mthca_free_icm(dev, table->icm[i], table->coherent); table->icm[i] = NULL; } mutex_unlock(&table->mutex); } -void *mthca_table_find(struct mthca_icm_table *table, int obj) +void *mthca_table_find(struct mthca_icm_table *table, int obj, dma_addr_t *dma_handle) { - int idx, offset, i; + int idx, offset, dma_offset, i; struct mthca_icm_chunk *chunk; struct mthca_icm *icm; struct page *page = NULL; @@ -225,13 +284,22 @@ void *mthca_table_find(struct mthca_icm_table *table, int obj) idx = (obj & (table->num_obj - 1)) * table->obj_size; icm = table->icm[idx / MTHCA_TABLE_CHUNK_SIZE]; - offset = idx % MTHCA_TABLE_CHUNK_SIZE; + dma_offset = offset = idx % MTHCA_TABLE_CHUNK_SIZE; if (!icm) goto out; list_for_each_entry(chunk, &icm->chunk_list, list) { for (i = 0; i < chunk->npages; ++i) { + if (dma_handle && dma_offset >= 0) { + if (sg_dma_len(&chunk->mem[i]) > dma_offset) + *dma_handle = sg_dma_address(&chunk->mem[i]) + + dma_offset; + dma_offset -= sg_dma_len(&chunk->mem[i]); + } + /* DMA mapping can merge pages but not split them, + * so if we found the page, dma_handle has already + * been assigned to. */ if (chunk->mem[i].length > offset) { page = chunk->mem[i].page; goto out; @@ -283,7 +351,7 @@ void mthca_table_put_range(struct mthca_dev *dev, struct mthca_icm_table *table, struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, u64 virt, int obj_size, int nobj, int reserved, - int use_lowmem) + int use_lowmem, int use_coherent) { struct mthca_icm_table *table; int num_icm; @@ -302,6 +370,7 @@ struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, table->num_obj = nobj; table->obj_size = obj_size; table->lowmem = use_lowmem; + table->coherent = use_coherent; mutex_init(&table->mutex); for (i = 0; i < num_icm; ++i) @@ -314,12 +383,12 @@ struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, table->icm[i] = mthca_alloc_icm(dev, chunk_size >> PAGE_SHIFT, (use_lowmem ? GFP_KERNEL : GFP_HIGHUSER) | - __GFP_NOWARN); + __GFP_NOWARN, use_coherent); if (!table->icm[i]) goto err; if (mthca_MAP_ICM(dev, table->icm[i], virt + i * MTHCA_TABLE_CHUNK_SIZE, &status) || status) { - mthca_free_icm(dev, table->icm[i]); + mthca_free_icm(dev, table->icm[i], table->coherent); table->icm[i] = NULL; goto err; } @@ -339,7 +408,7 @@ err: mthca_UNMAP_ICM(dev, virt + i * MTHCA_TABLE_CHUNK_SIZE, MTHCA_TABLE_CHUNK_SIZE / MTHCA_ICM_PAGE_SIZE, &status); - mthca_free_icm(dev, table->icm[i]); + mthca_free_icm(dev, table->icm[i], table->coherent); } kfree(table); @@ -357,7 +426,7 @@ void mthca_free_icm_table(struct mthca_dev *dev, struct mthca_icm_table *table) mthca_UNMAP_ICM(dev, table->virt + i * MTHCA_TABLE_CHUNK_SIZE, MTHCA_TABLE_CHUNK_SIZE / MTHCA_ICM_PAGE_SIZE, &status); - mthca_free_icm(dev, table->icm[i]); + mthca_free_icm(dev, table->icm[i], table->coherent); } kfree(table); diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h index 6d42947e1dc4..594144145f45 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.h +++ b/drivers/infiniband/hw/mthca/mthca_memfree.h @@ -69,6 +69,7 @@ struct mthca_icm_table { int num_obj; int obj_size; int lowmem; + int coherent; struct mutex mutex; struct mthca_icm *icm[0]; }; @@ -82,17 +83,17 @@ struct mthca_icm_iter { struct mthca_dev; struct mthca_icm *mthca_alloc_icm(struct mthca_dev *dev, int npages, - gfp_t gfp_mask); -void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm); + gfp_t gfp_mask, int coherent); +void mthca_free_icm(struct mthca_dev *dev, struct mthca_icm *icm, int coherent); struct mthca_icm_table *mthca_alloc_icm_table(struct mthca_dev *dev, u64 virt, int obj_size, int nobj, int reserved, - int use_lowmem); + int use_lowmem, int use_coherent); void mthca_free_icm_table(struct mthca_dev *dev, struct mthca_icm_table *table); int mthca_table_get(struct mthca_dev *dev, struct mthca_icm_table *table, int obj); void mthca_table_put(struct mthca_dev *dev, struct mthca_icm_table *table, int obj); -void *mthca_table_find(struct mthca_icm_table *table, int obj); +void *mthca_table_find(struct mthca_icm_table *table, int obj, dma_addr_t *dma_handle); int mthca_table_get_range(struct mthca_dev *dev, struct mthca_icm_table *table, int start, int end); void mthca_table_put_range(struct mthca_dev *dev, struct mthca_icm_table *table, diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index f71ffa88db3a..7d08f2038aff 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -524,7 +524,7 @@ int mthca_fmr_alloc(struct mthca_dev *dev, u32 pd, if (err) goto err_out_mpt_free; - mr->mem.arbel.mpt = mthca_table_find(dev->mr_table.mpt_table, key); + mr->mem.arbel.mpt = mthca_table_find(dev->mr_table.mpt_table, key, NULL); BUG_ON(!mr->mem.arbel.mpt); } else mr->mem.tavor.mpt = dev->mr_table.tavor_fmr.mpt_base + @@ -538,7 +538,8 @@ int mthca_fmr_alloc(struct mthca_dev *dev, u32 pd, if (mthca_is_memfree(dev)) { mr->mem.arbel.mtts = mthca_table_find(dev->mr_table.mtt_table, - mr->mtt->first_seg); + mr->mtt->first_seg, + &mr->mem.arbel.dma_handle); BUG_ON(!mr->mem.arbel.mtts); } else mr->mem.tavor.mtts = dev->mr_table.tavor_fmr.mtt_base + mtt_seg; @@ -712,6 +713,9 @@ int mthca_arbel_map_phys_fmr(struct ib_fmr *ibfmr, u64 *page_list, fmr->mem.arbel.mtts[i] = cpu_to_be64(page_list[i] | MTHCA_MTT_FLAG_PRESENT); + dma_sync_single(&dev->pdev->dev, fmr->mem.arbel.dma_handle, + list_len * sizeof(u64), DMA_TO_DEVICE); + fmr->mem.arbel.mpt->key = cpu_to_be32(key); fmr->mem.arbel.mpt->lkey = cpu_to_be32(key); fmr->mem.arbel.mpt->length = cpu_to_be64(list_len * (1ull << fmr->attr.page_shift)); diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h index 9a5bece3fa5c..1d266ac2e094 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.h +++ b/drivers/infiniband/hw/mthca/mthca_provider.h @@ -89,6 +89,7 @@ struct mthca_fmr { struct { struct mthca_mpt_entry *mpt; __be64 *mtts; + dma_addr_t dma_handle; } arbel; } mem; }; -- cgit v1.2.2 From c20e20ab0f3af9a44842ea11287c9ecd034a5d33 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 10 Feb 2007 23:13:12 +0200 Subject: IB/mthca: Merge MR and FMR space on 64-bit systems For Tavor, we currently reserve separate MPT and MTT space for FMRs to avoid abusing the vmalloc space on 32 bit kernels. No such problem exists on 64 bit kernels so let's not do it there. This way we have a shared pool for MR and FMR resources, used on demand. This will also make it possible to write MTTs for regular regions directly from driver. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_mr.c | 20 +++++++++++++++----- drivers/infiniband/hw/mthca/mthca_profile.c | 2 +- 2 files changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index 7d08f2038aff..958c6d5b6bc0 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -765,7 +765,7 @@ void mthca_arbel_fmr_unmap(struct mthca_dev *dev, struct mthca_fmr *fmr) int mthca_init_mr_table(struct mthca_dev *dev) { unsigned long addr; - int err, i; + int mpts, mtts, err, i; err = mthca_alloc_init(&dev->mr_table.mpt_alloc, dev->limits.num_mpts, @@ -799,13 +799,21 @@ int mthca_init_mr_table(struct mthca_dev *dev) err = -EINVAL; goto err_fmr_mpt; } + mpts = mtts = 1 << i; + } else { + mpts = dev->limits.num_mtt_segs; + mtts = dev->limits.num_mpts; + } + + if (!mthca_is_memfree(dev) && + (dev->mthca_flags & MTHCA_FLAG_FMR)) { addr = pci_resource_start(dev->pdev, 4) + ((pci_resource_len(dev->pdev, 4) - 1) & dev->mr_table.mpt_base); dev->mr_table.tavor_fmr.mpt_base = - ioremap(addr, (1 << i) * sizeof(struct mthca_mpt_entry)); + ioremap(addr, mpts * sizeof(struct mthca_mpt_entry)); if (!dev->mr_table.tavor_fmr.mpt_base) { mthca_warn(dev, "MPT ioremap for FMR failed.\n"); @@ -818,19 +826,21 @@ int mthca_init_mr_table(struct mthca_dev *dev) dev->mr_table.mtt_base); dev->mr_table.tavor_fmr.mtt_base = - ioremap(addr, (1 << i) * MTHCA_MTT_SEG_SIZE); + ioremap(addr, mtts * MTHCA_MTT_SEG_SIZE); if (!dev->mr_table.tavor_fmr.mtt_base) { mthca_warn(dev, "MTT ioremap for FMR failed.\n"); err = -ENOMEM; goto err_fmr_mtt; } + } - err = mthca_buddy_init(&dev->mr_table.tavor_fmr.mtt_buddy, i); + if (dev->limits.fmr_reserved_mtts) { + err = mthca_buddy_init(&dev->mr_table.tavor_fmr.mtt_buddy, fls(mtts - 1)); if (err) goto err_fmr_mtt_buddy; /* Prevent regular MRs from using FMR keys */ - err = mthca_buddy_alloc(&dev->mr_table.mtt_buddy, i); + err = mthca_buddy_alloc(&dev->mr_table.mtt_buddy, fls(mtts - 1)); if (err) goto err_reserve_fmr; diff --git a/drivers/infiniband/hw/mthca/mthca_profile.c b/drivers/infiniband/hw/mthca/mthca_profile.c index 58d44aa3c302..26bf86d1cfcd 100644 --- a/drivers/infiniband/hw/mthca/mthca_profile.c +++ b/drivers/infiniband/hw/mthca/mthca_profile.c @@ -277,7 +277,7 @@ u64 mthca_make_profile(struct mthca_dev *dev, * out of the MR pool. They don't use additional memory, but * we assign them as part of the HCA profile anyway. */ - if (mthca_is_memfree(dev)) + if (mthca_is_memfree(dev) || BITS_PER_LONG == 64) dev->limits.fmr_reserved_mtts = 0; else dev->limits.fmr_reserved_mtts = request->fmr_reserved_mtts; -- cgit v1.2.2 From b2875d4c39759a732203db32f245cc6d8bbdd7cf Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 10 Feb 2007 23:14:25 +0200 Subject: IB/mthca: Always fill MTTs from CPU Speed up memory registration by filling in MTTs directly when the CPU can write directly to the whole table (all mem-free cards, and to Tavor mode on 64-bit systems with the patch I posted earlier). This reduces the number of FW commands needed to register an MR by at least a factor of 2 and speeds up memory registration significantly. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_dev.h | 2 + drivers/infiniband/hw/mthca/mthca_mr.c | 82 +++++++++++++++++++++++++++- drivers/infiniband/hw/mthca/mthca_provider.c | 14 ++--- 3 files changed, 89 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index fe5cecf70fed..b7e42efaf43d 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -464,6 +464,8 @@ void mthca_uar_free(struct mthca_dev *dev, struct mthca_uar *uar); int mthca_pd_alloc(struct mthca_dev *dev, int privileged, struct mthca_pd *pd); void mthca_pd_free(struct mthca_dev *dev, struct mthca_pd *pd); +int mthca_write_mtt_size(struct mthca_dev *dev); + struct mthca_mtt *mthca_alloc_mtt(struct mthca_dev *dev, int size); void mthca_free_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt); int mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt, diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index 958c6d5b6bc0..6037dd3f87df 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -243,8 +243,8 @@ void mthca_free_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt) kfree(mtt); } -int mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt, - int start_index, u64 *buffer_list, int list_len) +static int __mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt, + int start_index, u64 *buffer_list, int list_len) { struct mthca_mailbox *mailbox; __be64 *mtt_entry; @@ -295,6 +295,84 @@ out: return err; } +int mthca_write_mtt_size(struct mthca_dev *dev) +{ + if (dev->mr_table.fmr_mtt_buddy != &dev->mr_table.mtt_buddy) + /* + * Be friendly to WRITE_MTT command + * and leave two empty slots for the + * index and reserved fields of the + * mailbox. + */ + return PAGE_SIZE / sizeof (u64) - 2; + + /* For Arbel, all MTTs must fit in the same page. */ + return mthca_is_memfree(dev) ? (PAGE_SIZE / sizeof (u64)) : 0x7ffffff; +} + +void mthca_tavor_write_mtt_seg(struct mthca_dev *dev, struct mthca_mtt *mtt, + int start_index, u64 *buffer_list, int list_len) +{ + u64 __iomem *mtts; + int i; + + mtts = dev->mr_table.tavor_fmr.mtt_base + mtt->first_seg * MTHCA_MTT_SEG_SIZE + + start_index * sizeof (u64); + for (i = 0; i < list_len; ++i) + mthca_write64_raw(cpu_to_be64(buffer_list[i] | MTHCA_MTT_FLAG_PRESENT), + mtts + i); +} + +void mthca_arbel_write_mtt_seg(struct mthca_dev *dev, struct mthca_mtt *mtt, + int start_index, u64 *buffer_list, int list_len) +{ + __be64 *mtts; + dma_addr_t dma_handle; + int i; + int s = start_index * sizeof (u64); + + /* For Arbel, all MTTs must fit in the same page. */ + BUG_ON(s / PAGE_SIZE != (s + list_len * sizeof(u64) - 1) / PAGE_SIZE); + /* Require full segments */ + BUG_ON(s % MTHCA_MTT_SEG_SIZE); + + mtts = mthca_table_find(dev->mr_table.mtt_table, mtt->first_seg + + s / MTHCA_MTT_SEG_SIZE, &dma_handle); + + BUG_ON(!mtts); + + for (i = 0; i < list_len; ++i) + mtts[i] = cpu_to_be64(buffer_list[i] | MTHCA_MTT_FLAG_PRESENT); + + dma_sync_single(&dev->pdev->dev, dma_handle, list_len * sizeof (u64), DMA_TO_DEVICE); +} + +int mthca_write_mtt(struct mthca_dev *dev, struct mthca_mtt *mtt, + int start_index, u64 *buffer_list, int list_len) +{ + int size = mthca_write_mtt_size(dev); + int chunk; + + if (dev->mr_table.fmr_mtt_buddy != &dev->mr_table.mtt_buddy) + return __mthca_write_mtt(dev, mtt, start_index, buffer_list, list_len); + + while (list_len > 0) { + chunk = min(size, list_len); + if (mthca_is_memfree(dev)) + mthca_arbel_write_mtt_seg(dev, mtt, start_index, + buffer_list, chunk); + else + mthca_tavor_write_mtt_seg(dev, mtt, start_index, + buffer_list, chunk); + + list_len -= chunk; + start_index += chunk; + buffer_list += chunk; + } + + return 0; +} + static inline u32 tavor_hw_index_to_key(u32 ind) { return ind; diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index 7b96751695ea..0725ad7ad9bf 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -1015,6 +1015,7 @@ static struct ib_mr *mthca_reg_user_mr(struct ib_pd *pd, struct ib_umem *region, int shift, n, len; int i, j, k; int err = 0; + int write_mtt_size; shift = ffs(region->page_size) - 1; @@ -1040,6 +1041,8 @@ static struct ib_mr *mthca_reg_user_mr(struct ib_pd *pd, struct ib_umem *region, i = n = 0; + write_mtt_size = min(mthca_write_mtt_size(dev), (int) (PAGE_SIZE / sizeof *pages)); + list_for_each_entry(chunk, ®ion->chunk_list, list) for (j = 0; j < chunk->nmap; ++j) { len = sg_dma_len(&chunk->page_list[j]) >> shift; @@ -1047,14 +1050,11 @@ static struct ib_mr *mthca_reg_user_mr(struct ib_pd *pd, struct ib_umem *region, pages[i++] = sg_dma_address(&chunk->page_list[j]) + region->page_size * k; /* - * Be friendly to WRITE_MTT command - * and leave two empty slots for the - * index and reserved fields of the - * mailbox. + * Be friendly to write_mtt and pass it chunks + * of appropriate size. */ - if (i == PAGE_SIZE / sizeof (u64) - 2) { - err = mthca_write_mtt(dev, mr->mtt, - n, pages, i); + if (i == write_mtt_size) { + err = mthca_write_mtt(dev, mr->mtt, n, pages, i); if (err) goto mtt_done; n += i; -- cgit v1.2.2 From 8ce0a7df6e6117d8814e976d4b7ce6a6b2c9cf93 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 12 Feb 2007 17:43:46 -0600 Subject: [POWERPC] 85xx: Don't write reserved values to MAS1[TSIZE] Some of the current tlbwe instructions early on in head_fsl_booke.S take advantage of unarchitected behavior that allows the writing of reserved values to the TSIZE field. This patch corrects that, as well as an error where an uninitialized (by linux) value was written into a MAS register and used for a tlbwe. Correct this for both arch/ppc and arch/powerpc. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala --- arch/powerpc/kernel/head_fsl_booke.S | 5 ++++- arch/ppc/kernel/head_fsl_booke.S | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 66877bdfe0b7..54f40d95cdb9 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -206,7 +206,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ mtspr SPRN_MAS0,r7 tlbre - li r6,0 + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r6 tlbwe /* Invalidate TLB1 */ @@ -248,6 +249,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 tlbre + mfspr r8,SPRN_MAS1 + rlwinm r8,r8,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r8 tlbwe /* Invalidate TLB1 */ diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 66877bdfe0b7..54f40d95cdb9 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -206,7 +206,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ mtspr SPRN_MAS0,r7 tlbre - li r6,0 + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r6 tlbwe /* Invalidate TLB1 */ @@ -248,6 +249,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 tlbre + mfspr r8,SPRN_MAS1 + rlwinm r8,r8,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r8 tlbwe /* Invalidate TLB1 */ -- cgit v1.2.2 From 1f1fec94589ed0b14c749eb9494bb690dbdf8d5a Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 6 Feb 2007 12:48:31 +1100 Subject: [POWERPC] Remove ibm4{xx,4x}.h from arch/powerpc ARCH=powerpc should not use the ghastly un-multiplatformable tangle of includes that starts with asm-ppc/ibm4xx.h. This patch removes a compile-breaking include of it from head_44x.S. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_44x.S | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index accb39d49911..a15d4b8cce48 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -32,8 +32,6 @@ #include #include #include -#include -#include #include #include #include -- cgit v1.2.2 From 6e1d9d04c4004361fb327abcbde74a20e8dca2ff Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Mon, 12 Feb 2007 20:26:39 -0800 Subject: [IPV6] HASHTABLES: Use appropriate seed for caluculating ehash index. Tetsuo Handa told me that connect(2) with TCPv6 socket almost always took a few minutes to return when we did not have any ports available in the range of net.ipv4.ip_local_port_range. The reason was that we used incorrect seed for calculating index of hash when we check established sockets in __inet6_check_established(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/inet6_hashtables.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c index 30b16da739c2..ae6b0e7eb488 100644 --- a/net/ipv6/inet6_hashtables.c +++ b/net/ipv6/inet6_hashtables.c @@ -172,7 +172,7 @@ static int __inet6_check_established(struct inet_timewait_death_row *death_row, const struct in6_addr *saddr = &np->daddr; const int dif = sk->sk_bound_dev_if; const __portpair ports = INET_COMBINED_PORTS(inet->dport, lport); - const unsigned int hash = inet6_ehashfn(daddr, inet->num, saddr, + const unsigned int hash = inet6_ehashfn(daddr, lport, saddr, inet->dport); struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash); struct sock *sk2; -- cgit v1.2.2 From e2e01bfef8399c8f39c9fdf4a5576039069e760c Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 12 Feb 2007 20:27:10 -0800 Subject: [XFRM]: Fix IPv4 tunnel mode decapsulation with IPV6=n Add missing break when CONFIG_IPV6=n. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv4/xfrm4_mode_tunnel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c index e54c5494c88f..e1cab33fdad1 100644 --- a/net/ipv4/xfrm4_mode_tunnel.c +++ b/net/ipv4/xfrm4_mode_tunnel.c @@ -95,6 +95,7 @@ static int xfrm4_tunnel_input(struct xfrm_state *x, struct sk_buff *skb) switch(iph->protocol){ case IPPROTO_IPIP: + break; #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE) case IPPROTO_IPV6: break; -- cgit v1.2.2 From cbca567ea5b337eaa2685606cbb9183e79b8f97f Mon Sep 17 00:00:00 2001 From: Akira Iguchi Date: Fri, 9 Feb 2007 16:53:59 +0900 Subject: [POWERPC] Celleb: improve MMU hashtable locking Disabling IRQ is required only in invalidation. This changes "spin_lock_irqsave" to "spin_lock" in other ops. Signed-off-by: Kou Ishizaki Signed-off-by: Akira Iguchi Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/celleb/htab.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/platforms/celleb/htab.c b/arch/powerpc/platforms/celleb/htab.c index ffa7c2c2030d..279d7339e170 100644 --- a/arch/powerpc/platforms/celleb/htab.c +++ b/arch/powerpc/platforms/celleb/htab.c @@ -95,7 +95,6 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, unsigned long lpar_rc; unsigned long slot; unsigned long hpte_v, hpte_r; - unsigned long flags; /* same as iseries */ if (vflags & HPTE_V_SECONDARY) @@ -115,17 +114,17 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) hpte_r &= ~_PAGE_COHERENT; - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); if ((lpar_rc = beat_read_mask(hpte_group)) == 0) { if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" full\n"); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); return -1; } lpar_rc = beat_insert_htab_entry(0, hpte_group, lpar_rc << 48, hpte_v, hpte_r, &slot); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); /* * Since we try and ioremap PHBs we don't own, the pte insert @@ -189,7 +188,6 @@ static long beat_lpar_hpte_updatepp(unsigned long slot, { unsigned long lpar_rc; unsigned long dummy0, dummy1, want_v; - unsigned long flags; want_v = hpte_encode_v(va, psize); @@ -197,17 +195,17 @@ static long beat_lpar_hpte_updatepp(unsigned long slot, "avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ", want_v & HPTE_V_AVPN, slot, psize, newpp); - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); dummy0 = beat_lpar_hpte_getword0(slot); if ((dummy0 & ~0x7FUL) != (want_v & ~0x7FUL)) { DBG_LOW("not found !\n"); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); return -1; } lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0, &dummy1); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); if (lpar_rc != 0 || dummy0 == 0) { DBG_LOW("not found !\n"); return -1; @@ -256,18 +254,17 @@ static void beat_lpar_hpte_updateboltedpp(unsigned long newpp, int psize) { unsigned long lpar_rc, slot, vsid, va, dummy0, dummy1; - unsigned long flags; vsid = get_kernel_vsid(ea); va = (vsid << 28) | (ea & 0x0fffffff); - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); slot = beat_lpar_hpte_find(va, psize); BUG_ON(slot == -1); lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0, &dummy1); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); BUG_ON(lpar_rc != 0); } -- cgit v1.2.2 From 9ea8b7c96f64f68548976ba65062cee2f2b7d831 Mon Sep 17 00:00:00 2001 From: Pavel Fedin Date: Mon, 29 Jan 2007 15:13:03 +0300 Subject: [POWERPC] Virtual DMA support for floppy driver for new powerpc architecture During ppc64+ppc merge virtual DMA code for floppy driver was not ported. This patch restores virtual DMA support for floppy in new powerpc target. It is necessary at least on Pegasos and AmigaOne machines for the floppy drive to function. ISA DMA controller works incorrectly there due to its addressing limitations. Virtual DMA mode is activated by floppy=nodma option passed to the kernel (or module). There's no automatic switch like on i386. Signed-off-by: Pavel Fedin Signed-off-by: Paul Mackerras --- include/asm-powerpc/floppy.h | 135 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 122 insertions(+), 13 deletions(-) diff --git a/include/asm-powerpc/floppy.h b/include/asm-powerpc/floppy.h index fd242a22331c..a0f14eea1da5 100644 --- a/include/asm-powerpc/floppy.h +++ b/include/asm-powerpc/floppy.h @@ -17,28 +17,115 @@ #define fd_outb(value,port) outb_p(value,port) #define fd_enable_dma() enable_dma(FLOPPY_DMA) -#define fd_disable_dma() disable_dma(FLOPPY_DMA) -#define fd_request_dma() request_dma(FLOPPY_DMA, "floppy") -#define fd_free_dma() free_dma(FLOPPY_DMA) +#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA) +#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA) #define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA) #define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode) #define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count) +#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA) #define fd_enable_irq() enable_irq(FLOPPY_IRQ) #define fd_disable_irq() disable_irq(FLOPPY_IRQ) #define fd_cacheflush(addr,size) /* nothing */ -#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt, \ - IRQF_DISABLED, "floppy", NULL) #define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); -#ifdef CONFIG_PCI - #include #include /* for ppc64_isabridge_dev */ -#define fd_dma_setup(addr,size,mode,io) powerpc_fd_dma_setup(addr,size,mode,io) +#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io) + +static int fd_request_dma(void); + +struct fd_dma_ops { + void (*_disable_dma)(unsigned int dmanr); + void (*_free_dma)(unsigned int dmanr); + int (*_get_dma_residue)(unsigned int dummy); + int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); +}; + +static int virtual_dma_count; +static int virtual_dma_residue; +static char *virtual_dma_addr; +static int virtual_dma_mode; +static int doing_vdma; +static struct fd_dma_ops *fd_ops; + +static irqreturn_t floppy_hardint(int irq, void *dev_id) +{ + unsigned char st; + int lcount; + char *lptr; + + if (!doing_vdma) + return floppy_interrupt(irq, dev_id); + + + st = 1; + for (lcount=virtual_dma_count, lptr=virtual_dma_addr; + lcount; lcount--, lptr++) { + st=inb(virtual_dma_port+4) & 0xa0 ; + if (st != 0xa0) + break; + if (virtual_dma_mode) + outb_p(*lptr, virtual_dma_port+5); + else + *lptr = inb_p(virtual_dma_port+5); + } + virtual_dma_count = lcount; + virtual_dma_addr = lptr; + st = inb(virtual_dma_port+4); + + if (st == 0x20) + return IRQ_HANDLED; + if (!(st & 0x20)) { + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; + doing_vdma = 0; + floppy_interrupt(irq, dev_id); + return IRQ_HANDLED; + } + return IRQ_HANDLED; +} -static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size, - int mode, int io) +static void vdma_disable_dma(unsigned int dummy) +{ + doing_vdma = 0; + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; +} + +static void vdma_nop(unsigned int dummy) +{ +} + + +static int vdma_get_dma_residue(unsigned int dummy) +{ + return virtual_dma_count + virtual_dma_residue; +} + + +static int fd_request_irq(void) +{ + if (can_use_virtual_dma) + return request_irq(FLOPPY_IRQ, floppy_hardint, + IRQF_DISABLED, "floppy", NULL); + else + return request_irq(FLOPPY_IRQ, floppy_interrupt, + IRQF_DISABLED, "floppy", NULL); +} + +static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) +{ + doing_vdma = 1; + virtual_dma_port = io; + virtual_dma_mode = (mode == DMA_MODE_WRITE); + virtual_dma_addr = addr; + virtual_dma_count = size; + virtual_dma_residue = 0; + return 0; +} + +static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) { static unsigned long prev_size; static dma_addr_t bus_addr = 0; @@ -46,6 +133,7 @@ static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size, static int prev_dir; int dir; + doing_vdma = 0; dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE; if (bus_addr @@ -74,11 +162,32 @@ static __inline__ int powerpc_fd_dma_setup(char *addr, unsigned long size, return 0; } -#endif /* CONFIG_PCI */ +static struct fd_dma_ops real_dma_ops = +{ + ._disable_dma = disable_dma, + ._free_dma = free_dma, + ._get_dma_residue = get_dma_residue, + ._dma_setup = hard_dma_setup +}; + +static struct fd_dma_ops virt_dma_ops = +{ + ._disable_dma = vdma_disable_dma, + ._free_dma = vdma_nop, + ._get_dma_residue = vdma_get_dma_residue, + ._dma_setup = vdma_dma_setup +}; -__inline__ void virtual_dma_init(void) +static int fd_request_dma() { - /* Nothing to do on PowerPC */ + if (can_use_virtual_dma & 1) { + fd_ops = &virt_dma_ops; + return 0; + } + else { + fd_ops = &real_dma_ops; + return request_dma(FLOPPY_DMA, "floppy"); + } } static int FDC1 = 0x3f0; -- cgit v1.2.2 From 872758563d7f132d25fc06857bd19df06c5c70c7 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Sat, 10 Feb 2007 21:35:12 +0100 Subject: [POWERPC] move variables in drivers/macintosh to bss Move all the initialized variables to bss. Mark a version string as const. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- drivers/macintosh/adbhid.c | 4 ++-- drivers/macintosh/apm_emu.c | 2 +- drivers/macintosh/mac_hid.c | 4 ++-- drivers/macintosh/therm_adt746x.c | 6 +++--- drivers/macintosh/via-cuda.c | 2 +- drivers/macintosh/via-macii.c | 10 +++++----- drivers/macintosh/via-maciisi.c | 6 +++--- drivers/macintosh/via-pmu.c | 11 +++++------ drivers/macintosh/via-pmu68k.c | 4 ++-- 9 files changed, 24 insertions(+), 25 deletions(-) diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index 1c7d6f221b55..b77ef5187d6d 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -574,8 +574,8 @@ static struct adb_request led_request; static int leds_pending[16]; static int leds_req_pending; static int pending_devs[16]; -static int pending_led_start=0; -static int pending_led_end=0; +static int pending_led_start; +static int pending_led_end; static DEFINE_SPINLOCK(leds_lock); static void leds_done(struct adb_request *req) diff --git a/drivers/macintosh/apm_emu.c b/drivers/macintosh/apm_emu.c index a6d50f4fabd7..c5e4d43f97fc 100644 --- a/drivers/macintosh/apm_emu.c +++ b/drivers/macintosh/apm_emu.c @@ -102,7 +102,7 @@ static struct pmu_sleep_notifier apm_sleep_notifier = { SLEEP_LEVEL_USERLAND, }; -static char driver_version[] = "0.5"; /* no spaces */ +static const char driver_version[] = "0.5"; /* no spaces */ #ifdef DEBUG static char * apm_event_name[] = { diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c index ee6b4ca69130..f632cec9ce45 100644 --- a/drivers/macintosh/mac_hid.c +++ b/drivers/macintosh/mac_hid.c @@ -17,10 +17,10 @@ static struct input_dev *emumousebtn; static int emumousebtn_input_register(void); -static int mouse_emulate_buttons = 0; +static int mouse_emulate_buttons; static int mouse_button2_keycode = KEY_RIGHTCTRL; /* right control key */ static int mouse_button3_keycode = KEY_RIGHTALT; /* right option key */ -static int mouse_last_keycode = 0; +static int mouse_last_keycode; #if defined(CONFIG_SYSCTL) /* file(s) in /proc/sys/dev/mac_hid */ diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index 3d3bf1643e73..a7ce55926638 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -48,11 +48,11 @@ static u8 FAN_SPD_SET[2] = {0x30, 0x31}; static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */ static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */ -static const char *sensor_location[3] = {NULL, NULL, NULL}; +static const char *sensor_location[3]; -static int limit_adjust = 0; +static int limit_adjust; static int fan_speed = -1; -static int verbose = 0; +static int verbose; MODULE_AUTHOR("Colin Leroy "); MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and " diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c index df66291b1322..3797f503cd6c 100644 --- a/drivers/macintosh/via-cuda.c +++ b/drivers/macintosh/via-cuda.c @@ -86,7 +86,7 @@ static int data_index; #ifdef CONFIG_PPC static struct device_node *vias; #endif -static int cuda_fully_inited = 0; +static int cuda_fully_inited; #ifdef CONFIG_ADB static int cuda_probe(void); diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c index 5d88d5b0ad99..175b3e56e375 100644 --- a/drivers/macintosh/via-macii.c +++ b/drivers/macintosh/via-macii.c @@ -107,10 +107,10 @@ static enum macii_state { awaiting_reply } macii_state; -static int need_poll = 0; -static int command_byte = 0; -static int last_reply = 0; -static int last_active = 0; +static int need_poll; +static int command_byte; +static int last_reply; +static int last_active; static struct adb_request *current_req; static struct adb_request *last_req; @@ -124,7 +124,7 @@ static int first_byte; static int prefix_len; static int status = ST_IDLE|TREQ; static int last_status; -static int driver_running = 0; +static int driver_running; /* debug level 10 required for ADB logging (should be && debug_adb, ideally) */ diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c index 1f0aa5dc9aa5..10051db48d23 100644 --- a/drivers/macintosh/via-maciisi.c +++ b/drivers/macintosh/via-maciisi.c @@ -63,10 +63,10 @@ static volatile unsigned char *via; #undef DEBUG_MACIISI_ADB -static struct adb_request* current_req = NULL; -static struct adb_request* last_req = NULL; +static struct adb_request* current_req; +static struct adb_request* last_req; static unsigned char maciisi_rbuf[16]; -static unsigned char *reply_ptr = NULL; +static unsigned char *reply_ptr; static int data_index; static int reading_reply; static int reply_len; diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 96bea4b62c43..8794cabae895 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -141,13 +141,13 @@ static volatile int adb_int_pending; static volatile int disable_poll; static struct device_node *vias; static int pmu_kind = PMU_UNKNOWN; -static int pmu_fully_inited = 0; +static int pmu_fully_inited; static int pmu_has_adb; static struct device_node *gpio_node; -static unsigned char __iomem *gpio_reg = NULL; +static unsigned char __iomem *gpio_reg; static int gpio_irq = NO_IRQ; static int gpio_irq_enabled = -1; -static volatile int pmu_suspended = 0; +static volatile int pmu_suspended; static spinlock_t pmu_lock; static u8 pmu_intr_mask; static int pmu_version; @@ -180,7 +180,7 @@ int asleep; BLOCKING_NOTIFIER_HEAD(sleep_notifier_list); #ifdef CONFIG_ADB -static int adb_dev_map = 0; +static int adb_dev_map; static int pmu_adb_flags; static int pmu_probe(void); @@ -2776,7 +2776,7 @@ pmu_polled_request(struct adb_request *req) #if defined(CONFIG_PM) && defined(CONFIG_PPC32) -static int pmu_sys_suspended = 0; +static int pmu_sys_suspended; static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state) { @@ -2816,7 +2816,6 @@ static struct sysdev_class pmu_sysclass = { }; static struct sys_device device_pmu = { - .id = 0, .cls = &pmu_sysclass, }; diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c index 4f5b6fa196c5..54baee57d2f8 100644 --- a/drivers/macintosh/via-pmu68k.c +++ b/drivers/macintosh/via-pmu68k.c @@ -96,10 +96,10 @@ static int data_index; static int data_len; static int adb_int_pending; static int pmu_adb_flags; -static int adb_dev_map = 0; +static int adb_dev_map; static struct adb_request bright_req_1, bright_req_2, bright_req_3; static int pmu_kind = PMU_UNKNOWN; -static int pmu_fully_inited = 0; +static int pmu_fully_inited; int asleep; BLOCKING_NOTIFIER_HEAD(sleep_notifier_list); -- cgit v1.2.2 From 2d99c41f05fc2a26737aacf943db03ca89841199 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Sat, 10 Feb 2007 21:38:37 +0100 Subject: [POWERPC] Mark winbond IDE PCI resources with start 0 as unassigned libata calls pci_request_regions to claim PCI BAR 0 - 5 pci_request_regions fails if one of the regions cant be claimed. bar 5 has start == 0, __request_resource will fail. Tested on a p630 in SMP mode with pata_sl82c105 00:03.1 IDE interface: Symphony Labs SL82c105 (rev 05) (prog-if 8f [Master SecP SecO PriP PriO]) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index c69bd15ced9c..fa59124ce3fe 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -98,6 +98,10 @@ static void fixup_winbond_82c105(struct pci_dev* dev) if (dev->resource[i].flags & IORESOURCE_IO && dev->bus->number == 0 && dev->devfn == 0x81) dev->resource[i].flags &= ~IORESOURCE_IO; + if (dev->resource[i].start == 0 && dev->resource[i].end) { + dev->resource[i].flags = 0; + dev->resource[i].end = 0; + } } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, -- cgit v1.2.2 From a334bdbdda9659b8f50a8620a11249fde62ccfde Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Sat, 10 Feb 2007 21:40:00 +0100 Subject: [POWERPC] Correct AC Power: in /proc/pmu/info on ibook1 /proc/pmu/info contains AC Power: 0 when booting without battery. Force AC Power, it will be updated whenever the battery state changes. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- drivers/macintosh/via-pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 8794cabae895..b6073bdb50c3 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -169,7 +169,7 @@ static int option_server_mode; int pmu_battery_count; int pmu_cur_battery; -unsigned int pmu_power_flags; +unsigned int pmu_power_flags = PMU_PWR_AC_PRESENT; struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES]; static int query_batt_timer = BATTERY_POLLING_COUNT; static struct adb_request batt_req; -- cgit v1.2.2 From 7ac9a13717c10c5ee074a6b23096c8d277fa5712 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 12 Feb 2007 13:31:08 +1100 Subject: [POWERPC] Fix vDSO page count calculation The recent vDSO consolidation patches broke powerpc due to a mistake in the definition of MAXPAGES constants. This fixes it by moving to a dynamically allocated array of pages instead as I don't like much hard coded size limits. Also move the vdso initialisation to an initcall since it doesn't really need to be done -that- early. Applogies for not catching the breakage earlier, Roland _did_ CC me on his patches a while ago, I got busy with other things and forgot to test them. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/vdso.c | 34 +++++++++++++++++++++++----------- arch/powerpc/mm/mem.c | 3 --- include/asm-powerpc/vdso.h | 5 ----- 3 files changed, 23 insertions(+), 19 deletions(-) diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index 50149ec6efa4..e46c31b36641 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -49,24 +49,23 @@ /* Max supported size for symbol names */ #define MAX_SYMNAME 64 -#define VDSO32_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2) -#define VDSO64_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2) - extern char vdso32_start, vdso32_end; static void *vdso32_kbase = &vdso32_start; -unsigned int vdso32_pages; -static struct page *vdso32_pagelist[VDSO32_MAXPAGES]; +static unsigned int vdso32_pages; +static struct page **vdso32_pagelist; unsigned long vdso32_sigtramp; unsigned long vdso32_rt_sigtramp; #ifdef CONFIG_PPC64 extern char vdso64_start, vdso64_end; static void *vdso64_kbase = &vdso64_start; -unsigned int vdso64_pages; -static struct page *vdso64_pagelist[VDSO64_MAXPAGES]; +static unsigned int vdso64_pages; +static struct page **vdso64_pagelist; unsigned long vdso64_rt_sigtramp; #endif /* CONFIG_PPC64 */ +static int vdso_ready; + /* * The vdso data page (aka. systemcfg for old ppc64 fans) is here. * Once the early boot kernel code no longer needs to muck around @@ -182,6 +181,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, unsigned long vdso_base; int rc; + if (!vdso_ready) + return 0; + #ifdef CONFIG_PPC64 if (test_thread_flag(TIF_32BIT)) { vdso_pagelist = vdso32_pagelist; @@ -661,7 +663,7 @@ static void __init vdso_setup_syscall_map(void) } -void __init vdso_init(void) +static int __init vdso_init(void) { int i; @@ -716,11 +718,13 @@ void __init vdso_init(void) #ifdef CONFIG_PPC64 vdso64_pages = 0; #endif - return; + return 0; } /* Make sure pages are in the correct state */ - BUG_ON(vdso32_pages + 2 > VDSO32_MAXPAGES); + vdso32_pagelist = kzalloc(sizeof(struct page *) * (vdso32_pages + 2), + GFP_KERNEL); + BUG_ON(vdso32_pagelist == NULL); for (i = 0; i < vdso32_pages; i++) { struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); ClearPageReserved(pg); @@ -731,7 +735,9 @@ void __init vdso_init(void) vdso32_pagelist[i] = NULL; #ifdef CONFIG_PPC64 - BUG_ON(vdso64_pages + 2 > VDSO64_MAXPAGES); + vdso64_pagelist = kzalloc(sizeof(struct page *) * (vdso64_pages + 2), + GFP_KERNEL); + BUG_ON(vdso64_pagelist == NULL); for (i = 0; i < vdso64_pages; i++) { struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); ClearPageReserved(pg); @@ -743,7 +749,13 @@ void __init vdso_init(void) #endif /* CONFIG_PPC64 */ get_page(virt_to_page(vdso_data)); + + smp_wmb(); + vdso_ready = 1; + + return 0; } +arch_initcall(vdso_init); int in_gate_area_no_task(unsigned long addr) { diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 77b4637097e9..52f397c108a7 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -384,9 +384,6 @@ void __init mem_init(void) initsize >> 10); mem_init_done = 1; - - /* Initialize the vDSO */ - vdso_init(); } /* diff --git a/include/asm-powerpc/vdso.h b/include/asm-powerpc/vdso.h index b9f9118b1607..26fc449bd989 100644 --- a/include/asm-powerpc/vdso.h +++ b/include/asm-powerpc/vdso.h @@ -18,16 +18,11 @@ #ifndef __ASSEMBLY__ -extern unsigned int vdso64_pages; -extern unsigned int vdso32_pages; - /* Offsets relative to thread->vdso_base */ extern unsigned long vdso64_rt_sigtramp; extern unsigned long vdso32_sigtramp; extern unsigned long vdso32_rt_sigtramp; -extern void vdso_init(void); - #else /* __ASSEMBLY__ */ #ifdef __VDSO64__ -- cgit v1.2.2 From ab9367e38fa97c2ed7f72fd5fa29d0d70d58df89 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 12 Feb 2007 11:29:04 +0100 Subject: [POWERPC] ppc: Add support for AMCC Taishan 440GX eval board This patch adds support for the AMCC Taishan PPC440GX evaluation board. This is still an arch/ppc port. I'm aware that the move of 4xx to arch/powerpc is making good progress right now. So this patch is mainly intended to make the Taishan support available for the community right now. Signed-off-by: Stefan Roese Signed-off-by: Paul Mackerras --- arch/ppc/configs/taishan_defconfig | 1077 ++++++++++++++++++++++++++++++++++++ arch/ppc/platforms/4xx/Kconfig | 10 +- arch/ppc/platforms/4xx/Makefile | 1 + arch/ppc/platforms/4xx/taishan.c | 395 +++++++++++++ arch/ppc/platforms/4xx/taishan.h | 67 +++ arch/ppc/syslib/Makefile | 1 + include/asm-ppc/ibm4xx.h | 4 + 7 files changed, 1553 insertions(+), 2 deletions(-) create mode 100644 arch/ppc/configs/taishan_defconfig create mode 100644 arch/ppc/platforms/4xx/taishan.c create mode 100644 arch/ppc/platforms/4xx/taishan.h diff --git a/arch/ppc/configs/taishan_defconfig b/arch/ppc/configs/taishan_defconfig new file mode 100644 index 000000000000..1ca0204267b1 --- /dev/null +++ b/arch/ppc/configs/taishan_defconfig @@ -0,0 +1,1077 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Mon Feb 12 11:11:58 2007 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +CONFIG_PPC_DCR_NATIVE=y +CONFIG_PPC_DCR=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_MATH_EMULATION is not set +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +CONFIG_4xx=y +CONFIG_WANT_EARLY_SERIAL=y + +# +# IBM 4xx options +# +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_LUAN is not set +# CONFIG_YUCCA is not set +# CONFIG_OCOTEA is not set +CONFIG_TAISHAN=y +CONFIG_440GX=y +CONFIG_440A=y +CONFIG_IBM_OCP=y +CONFIG_IBM_EMAC4=y +CONFIG_PPC4xx_DMA=y +CONFIG_PPC4xx_EDMA=y +CONFIG_PPC_GEN550=y +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="ip=on console=ttyS0,115200" +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=y +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=128 +CONFIG_IBM_EMAC_TXB=128 +CONFIG_IBM_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0 +CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y +# CONFIG_IBM_EMAC_DEBUG is not set +CONFIG_IBM_EMAC_ZMII=y +CONFIG_IBM_EMAC_RGMII=y +CONFIG_IBM_EMAC_TAH=y +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=y +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_JBD_DEBUG=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +CONFIG_BDI_SWITCH=y +# CONFIG_SERIAL_TEXT_DEBUG is not set +CONFIG_PPC_OCP=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 6980de420e92..705ae56016f0 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -98,6 +98,12 @@ config OCOTEA help This option enables support for the IBM PPC440GX evaluation board. +config TAISHAN + bool "Taishan" + select WANT_EARLY_SERIAL + help + This option enables support for the AMCC PPC440GX evaluation board. + endchoice config EP405PC @@ -126,7 +132,7 @@ config 440GP config 440GX bool - depends on OCOTEA + depends on OCOTEA || TAISHAN default y config 440SP @@ -173,7 +179,7 @@ config BOOKE config IBM_OCP bool - depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT default y config IBM_EMAC4 diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index a04a0d0a0f5c..fa6610bccaf9 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_OCOTEA) += ocotea.o obj-$(CONFIG_REDWOOD_5) += redwood5.o obj-$(CONFIG_REDWOOD_6) += redwood6.o obj-$(CONFIG_SYCAMORE) += sycamore.o +obj-$(CONFIG_TAISHAN) += taishan.o obj-$(CONFIG_WALNUT) += walnut.o obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o obj-$(CONFIG_XILINX_ML403) += xilinx_ml403.o diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c new file mode 100644 index 000000000000..bb0253eef45a --- /dev/null +++ b/arch/ppc/platforms/4xx/taishan.c @@ -0,0 +1,395 @@ +/* + * arch/ppc/platforms/4xx/taishan.c + * + * AMCC Taishan board specific routines + * + * Copyright 2007 DENX Software Engineering, Stefan Roese + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +extern bd_t __res; + +static struct ibm44x_clocks clocks __initdata; + +/* + * NOR FLASH configuration (using mtd physmap driver) + */ + +/* start will be added dynamically, end is always fixed */ +static struct resource taishan_nor_resource = { + .start = TAISHAN_FLASH_ADDR, + .end = 0x1ffffffffULL, + .flags = IORESOURCE_MEM, +}; + +#define RW_PART0_OF 0 +#define RW_PART0_SZ 0x180000 +#define RW_PART1_SZ 0x200000 +/* Partition 2 will be autosized dynamically... */ +#define RW_PART3_SZ 0x80000 +#define RW_PART4_SZ 0x40000 + +static struct mtd_partition taishan_nor_parts[] = { + { + .name = "kernel", + .offset = 0, + .size = RW_PART0_SZ + }, + { + .name = "root", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART1_SZ, + }, + { + .name = "user", + .offset = MTDPART_OFS_APPEND, +/* .size = RW_PART2_SZ */ /* will be adjusted dynamically */ + }, + { + .name = "env", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART3_SZ, + }, + { + .name = "u-boot", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART4_SZ, + } +}; + +static struct physmap_flash_data taishan_nor_data = { + .width = 4, + .parts = taishan_nor_parts, + .nr_parts = ARRAY_SIZE(taishan_nor_parts), +}; + +static struct platform_device taishan_nor_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &taishan_nor_data, + }, + .num_resources = 1, + .resource = &taishan_nor_resource, +}; + +static int taishan_setup_flash(void) +{ + /* + * Adjust partition 2 to flash size + */ + taishan_nor_parts[2].size = __res.bi_flashsize - + RW_PART0_SZ - RW_PART1_SZ - RW_PART3_SZ - RW_PART4_SZ; + + platform_device_register(&taishan_nor_device); + + return 0; +} +arch_initcall(taishan_setup_flash); + +static void __init +taishan_calibrate_decr(void) +{ + unsigned int freq; + + if (mfspr(SPRN_CCR1) & CCR1_TCS) + freq = TAISHAN_TMR_CLK; + else + freq = clocks.cpu; + + ibm44x_calibrate_decr(freq); +} + +static int +taishan_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: AMCC\n"); + seq_printf(m, "machine\t\t: PPC440GX EVB (Taishan)\n"); + ibm440gx_show_cpuinfo(m); + return 0; +} + +static inline int +taishan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 23, 24, 25, 26 }, /* IDSEL 1 - PCI Slot 0 */ + { 24, 25, 26, 23 }, /* IDSEL 2 - PCI Slot 1 */ + }; + + const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void __init taishan_set_emacdata(void) +{ + struct ocp_def *def; + struct ocp_func_emac_data *emacdata; + int i; + + /* Set phy_map, phy_mode, and mac_addr for each EMAC */ + for (i=2; i<4; i++) { + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i); + emacdata = def->additions; + if (i < 2) { + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_SMII; + } else { + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_RGMII; + } + if (i == 0) + memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6); + else if (i == 1) + memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6); + else if (i == 2) + memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); + else if (i == 3) + memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6); + } +} + +#define PCIX_READW(offset) \ + (readw(pcix_reg_base+offset)) + +#define PCIX_WRITEW(value, offset) \ + (writew(value, pcix_reg_base+offset)) + +#define PCIX_WRITEL(value, offset) \ + (writel(value, pcix_reg_base+offset)) + +/* + * FIXME: This is only here to "make it work". This will move + * to a ibm_pcix.c which will contain a generic IBM PCIX bridge + * configuration library. -Matt + */ +static void __init +taishan_setup_pcix(void) +{ + void *pcix_reg_base; + + pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE); + + /* Enable PCIX0 I/O, Mem, and Busmaster cycles */ + PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND); + + /* Disable all windows */ + PCIX_WRITEL(0, PCIX0_POM0SA); + PCIX_WRITEL(0, PCIX0_POM1SA); + PCIX_WRITEL(0, PCIX0_POM2SA); + PCIX_WRITEL(0, PCIX0_PIM0SA); + PCIX_WRITEL(0, PCIX0_PIM0SAH); + PCIX_WRITEL(0, PCIX0_PIM1SA); + PCIX_WRITEL(0, PCIX0_PIM2SA); + PCIX_WRITEL(0, PCIX0_PIM2SAH); + + /* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */ + PCIX_WRITEL(0x00000003, PCIX0_POM0LAH); + PCIX_WRITEL(0x80000000, PCIX0_POM0LAL); + PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH); + PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL); + PCIX_WRITEL(0x80000001, PCIX0_POM0SA); + + /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */ + PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH); + PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL); + PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA); + PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH); + + iounmap(pcix_reg_base); + + eieio(); +} + +static void __init +taishan_setup_hose(void) +{ + struct pci_controller *hose; + + /* Configure windows on the PCI-X host bridge */ + taishan_setup_pcix(); + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + hose->pci_mem_offset = TAISHAN_PCI_MEM_OFFSET; + + pci_init_resource(&hose->io_resource, + TAISHAN_PCI_LOWER_IO, + TAISHAN_PCI_UPPER_IO, + IORESOURCE_IO, + "PCI host bridge"); + + pci_init_resource(&hose->mem_resources[0], + TAISHAN_PCI_LOWER_MEM, + TAISHAN_PCI_UPPER_MEM, + IORESOURCE_MEM, + "PCI host bridge"); + + hose->io_space.start = TAISHAN_PCI_LOWER_IO; + hose->io_space.end = TAISHAN_PCI_UPPER_IO; + hose->mem_space.start = TAISHAN_PCI_LOWER_MEM; + hose->mem_space.end = TAISHAN_PCI_UPPER_MEM; + hose->io_base_virt = ioremap64(TAISHAN_PCI_IO_BASE, TAISHAN_PCI_IO_SIZE); + isa_io_base = (unsigned long) hose->io_base_virt; + + setup_indirect_pci(hose, + TAISHAN_PCI_CFGA_PLB32, + TAISHAN_PCI_CFGD_PLB32); + hose->set_cfg_type = 1; + + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = taishan_map_irq; +} + + +static void __init +taishan_early_serial_map(void) +{ + struct uart_port port; + + /* Setup ioremapped serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = ioremap64(PPC440GX_UART0_ADDR, 8); + port.irq = UART0_INT; + port.uartclk = clocks.uart0; + port.regshift = 0; + port.iotype = UPIO_MEM; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) + printk("Early serial init of port 0 failed\n"); + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); +#endif + + port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); + port.irq = UART1_INT; + port.uartclk = clocks.uart1; + port.line = 1; + + if (early_serial_setup(&port) != 0) + printk("Early serial init of port 1 failed\n"); + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(1, &port); +#endif +} + +static void __init +taishan_setup_arch(void) +{ + taishan_set_emacdata(); + + ibm440gx_tah_enable(); + + /* + * Determine various clocks. + * To be completely correct we should get SysClk + * from FPGA, because it can be changed by on-board switches + * --ebs + */ + ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ocp_sys_info.opb_bus_freq = clocks.opb; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Setup PCI host bridge */ + taishan_setup_hose(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + taishan_early_serial_map(); + + /* Identify the system */ + printk("AMCC PowerPC 440GX Taishan Platform\n"); +} + +static void __init taishan_init(void) +{ + ibm440gx_l2c_setup(&clocks); +} + +void __init platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, unsigned long r7) +{ + ibm44x_platform_init(r3, r4, r5, r6, r7); + + ppc_md.setup_arch = taishan_setup_arch; + ppc_md.show_cpuinfo = taishan_show_cpuinfo; + ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ + + ppc_md.calibrate_decr = taishan_calibrate_decr; + +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = taishan_early_serial_map; +#endif + ppc_md.init = taishan_init; +} + diff --git a/arch/ppc/platforms/4xx/taishan.h b/arch/ppc/platforms/4xx/taishan.h new file mode 100644 index 000000000000..ea7561a80457 --- /dev/null +++ b/arch/ppc/platforms/4xx/taishan.h @@ -0,0 +1,67 @@ +/* + * arch/ppc/platforms/4xx/taishan.h + * + * AMCC Taishan board definitions + * + * Copyright 2007 DENX Software Engineering, Stefan Roese + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __ASM_TAISHAN_H__ +#define __ASM_TAISHAN_H__ + +#include + +/* External timer clock frequency */ +#define TAISHAN_TMR_CLK 25000000 + +/* Flash */ +#define TAISHAN_FPGA_ADDR 0x0000000141000000ULL +#define TAISHAN_LCM_ADDR 0x0000000142000000ULL +#define TAISHAN_FLASH_ADDR 0x00000001fc000000ULL +#define TAISHAN_FLASH_SIZE 0x4000000 + +/* + * Serial port defines + */ +#define RS_TABLE_SIZE 2 + +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 + +#define BASE_BAUD 11059200/16 +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: (void*)UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) + +/* PCI support */ +#define TAISHAN_PCI_LOWER_IO 0x00000000 +#define TAISHAN_PCI_UPPER_IO 0x0000ffff +#define TAISHAN_PCI_LOWER_MEM 0x80000000 +#define TAISHAN_PCI_UPPER_MEM 0xffffefff + +#define TAISHAN_PCI_CFGA_PLB32 0x0ec00000 +#define TAISHAN_PCI_CFGD_PLB32 0x0ec00004 + +#define TAISHAN_PCI_IO_BASE 0x0000000208000000ULL +#define TAISHAN_PCI_IO_SIZE 0x00010000 +#define TAISHAN_PCI_MEM_OFFSET 0x00000000 + +#endif /* __ASM_TAISHAN_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index d84f04666972..09911118c675 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_SANDPOINT) += pci_auto.o todc_time.o obj-$(CONFIG_SBC82xx) += todc_time.o obj-$(CONFIG_SPRUCE) += cpc700_pic.o pci_auto.o \ todc_time.o +obj-$(CONFIG_TAISHAN) += pci_auto.o obj-$(CONFIG_8260) += m8260_setup.o pq2_devices.o pq2_sys.o \ ppc_sys.o obj-$(CONFIG_PCI_8260) += m82xx_pci.o pci_auto.o diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h index 7a64ede53bb6..92fd02d7b177 100644 --- a/include/asm-ppc/ibm4xx.h +++ b/include/asm-ppc/ibm4xx.h @@ -109,6 +109,10 @@ void ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5, #include #endif +#if defined(CONFIG_TAISHAN) +#include +#endif + #ifndef __ASSEMBLY__ #ifdef CONFIG_40x /* -- cgit v1.2.2 From 9b96ea662b404b9ed882c78cb844510d804a83e6 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 12 Feb 2007 22:09:18 +1100 Subject: [POWERPC] Wire up sys_getcpu Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- include/asm-powerpc/systbl.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h index 97b435484177..418e5c7e972c 100644 --- a/include/asm-powerpc/systbl.h +++ b/include/asm-powerpc/systbl.h @@ -305,3 +305,4 @@ SYSCALL_SPU(faccessat) COMPAT_SYS_SPU(get_robust_list) COMPAT_SYS_SPU(set_robust_list) COMPAT_SYS(move_pages) +SYSCALL_SPU(getcpu) -- cgit v1.2.2 From 40d244d69a3871dd05a5fdae29f36823a6ee3e33 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 12 Feb 2007 22:10:48 +1100 Subject: [POWERPC] correct a prototype This rids us of a warning. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index dd17dffbf058..7ec4ac77c0fa 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -44,7 +44,7 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec); -extern void __restore_cpu_pa6t(unsigned long offset, struct cpu_spec* spec); +extern void __restore_cpu_pa6t(void); extern void __restore_cpu_ppc970(void); #endif /* CONFIG_PPC64 */ -- cgit v1.2.2 From e3aba81d154c53a82e2a7e0ff5e7f1162a53cf27 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 12 Feb 2007 13:36:55 -0700 Subject: [POWERPC] Fixup mp5200 drivers to match device tree changes Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/lite5200.c | 29 ++++++++++++++-------------- arch/powerpc/platforms/52xx/mpc52xx_common.c | 4 ++-- arch/powerpc/platforms/52xx/mpc52xx_pic.c | 10 +++++----- drivers/ata/pata_mpc52xx.c | 6 ++---- drivers/serial/mpc52xx_uart.c | 5 ++--- 5 files changed, 26 insertions(+), 28 deletions(-) diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index cdb16bfa6ca6..cc3b40de21dd 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -51,13 +51,13 @@ */ static void __init -lite52xx_setup_cpu(void) +lite5200_setup_cpu(void) { struct mpc52xx_gpio __iomem *gpio; u32 port_config; /* Map zones */ - gpio = mpc52xx_find_and_map("mpc52xx-gpio"); + gpio = mpc52xx_find_and_map("mpc5200-gpio"); if (!gpio) { printk(KERN_ERR __FILE__ ": " "Error while mapping GPIO register for port config. " @@ -85,12 +85,12 @@ error: iounmap(gpio); } -static void __init lite52xx_setup_arch(void) +static void __init lite5200_setup_arch(void) { struct device_node *np; if (ppc_md.progress) - ppc_md.progress("lite52xx_setup_arch()", 0); + ppc_md.progress("lite5200_setup_arch()", 0); np = of_find_node_by_type(NULL, "cpu"); if (np) { @@ -105,7 +105,7 @@ static void __init lite52xx_setup_arch(void) /* CPU & Port mux setup */ mpc52xx_setup_cpu(); /* Generic */ - lite52xx_setup_cpu(); /* Platorm specific */ + lite5200_setup_cpu(); /* Platorm specific */ #ifdef CONFIG_PCI np = of_find_node_by_type(np, "pci"); @@ -126,7 +126,7 @@ static void __init lite52xx_setup_arch(void) } -void lite52xx_show_cpuinfo(struct seq_file *m) +void lite5200_show_cpuinfo(struct seq_file *m) { struct device_node* np = of_find_all_nodes(NULL); const char *model = NULL; @@ -143,25 +143,26 @@ void lite52xx_show_cpuinfo(struct seq_file *m) /* * Called very early, MMU is off, device-tree isn't unflattened */ -static int __init lite52xx_probe(void) +static int __init lite5200_probe(void) { unsigned long node = of_get_flat_dt_root(); const char *model = of_get_flat_dt_prop(node, "model", NULL); - if (!of_flat_dt_is_compatible(node, "lite52xx")) + if (!of_flat_dt_is_compatible(node, "fsl,lite5200") && + !of_flat_dt_is_compatible(node, "fsl,lite5200b")) return 0; - pr_debug("%s board w/ mpc52xx found\n", model ? model : "unknown"); + pr_debug("%s board found\n", model ? model : "unknown"); return 1; } -define_machine(lite52xx) { - .name = "lite52xx", - .probe = lite52xx_probe, - .setup_arch = lite52xx_setup_arch, +define_machine(lite5200) { + .name = "lite5200", + .probe = lite5200_probe, + .setup_arch = lite5200_setup_arch, .init = mpc52xx_declare_of_platform_devices, .init_IRQ = mpc52xx_init_irq, .get_irq = mpc52xx_get_irq, - .show_cpuinfo = lite52xx_show_cpuinfo, + .show_cpuinfo = lite5200_show_cpuinfo, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index cc40889074bd..ed0cb694aea8 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -83,8 +83,8 @@ mpc52xx_setup_cpu(void) struct mpc52xx_xlb __iomem *xlb; /* Map zones */ - cdm = mpc52xx_find_and_map("mpc52xx-cdm"); - xlb = mpc52xx_find_and_map("mpc52xx-xlb"); + cdm = mpc52xx_find_and_map("mpc5200-cdm"); + xlb = mpc52xx_find_and_map("mpc5200-xlb"); if (!cdm || !xlb) { printk(KERN_ERR __FILE__ ": " diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index cd91a6c3aafa..c75192567e55 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -383,16 +383,16 @@ void __init mpc52xx_init_irq(void) struct device_node *picnode; /* Remap the necessary zones */ - picnode = of_find_compatible_node(NULL, NULL, "mpc52xx-pic"); + picnode = of_find_compatible_node(NULL, NULL, "mpc5200-pic"); - intr = mpc52xx_find_and_map("mpc52xx-pic"); + intr = mpc52xx_find_and_map("mpc5200-pic"); if (!intr) - panic(__FILE__ ": find_and_map failed on 'mpc52xx-pic'. " + panic(__FILE__ ": find_and_map failed on 'mpc5200-pic'. " "Check node !"); - sdma = mpc52xx_find_and_map("mpc52xx-bestcomm"); + sdma = mpc52xx_find_and_map("mpc5200-bestcomm"); if (!sdma) - panic(__FILE__ ": find_and_map failed on 'mpc52xx-bestcomm'. " + panic(__FILE__ ": find_and_map failed on 'mpc5200-bestcomm'. " "Check node !"); /* Disable all interrupt sources. */ diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index d7378df44970..29e1809e5ecf 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -484,10 +484,8 @@ mpc52xx_ata_resume(struct of_device *op) static struct of_device_id mpc52xx_ata_of_match[] = { { - .compatible = "mpc5200-ata", - }, - { - .compatible = "mpc52xx-ata", + .type = "ata", + .compatible = "mpc5200-ata", }, {}, }; diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 3c4b6c243712..955bbd653e22 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -127,8 +127,7 @@ static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id); #if defined(CONFIG_PPC_MERGE) static struct of_device_id mpc52xx_uart_of_match[] = { - { .type = "serial", .compatible = "mpc52xx-psc-uart", }, - { .type = "serial", .compatible = "mpc5200-psc", }, /* Efika only! */ + { .type = "serial", .compatible = "mpc5200-psc-uart", }, {}, }; #endif @@ -1068,7 +1067,7 @@ mpc52xx_uart_of_enumerate(void) continue; /* Is a particular device number requested? */ - devno = get_property(np, "device_no", NULL); + devno = get_property(np, "port-number", NULL); mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1); } -- cgit v1.2.2 From 05cbbc692f513c0e62372abeab01b04b07096582 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 12 Feb 2007 13:36:54 -0700 Subject: [POWERPC] mpc5200 device tree bindings refinement Much needed refinement of mpc5200 device tree binding specifications. Short list: - drop mpc52xx designator; only two supported chips exist, 5200 and 5200b. It's premature to refer to them as '52xx'. - Specify optional 'model' and 'revision' properties in the soc5200 node - Specify reqiured 'cell-index' property to identify between multiple SOC devices of the same type. (Useful for arbitrating shared register access) - Specify optional 'port-number' property for adjusting the logical serial port assignments. - Specify optional 'has-wdt' property for gpt0 node. - Add system-frequency property to soc5200 node Signed-off-by: Grant Likely Signed-off-by: Paul Mackerras --- .../powerpc/mpc52xx-device-tree-bindings.txt | 183 ++++++++++++++------- arch/powerpc/boot/dts/lite5200.dts | 135 ++++++++------- arch/powerpc/boot/dts/lite5200b.dts | 135 ++++++++------- 3 files changed, 279 insertions(+), 174 deletions(-) diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt index 69f016f02bb0..e59fcbbe338c 100644 --- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt +++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt @@ -1,7 +1,7 @@ -MPC52xx Device Tree Bindings +MPC5200 Device Tree Bindings ---------------------------- -(c) 2006 Secret Lab Technologies Ltd +(c) 2006-2007 Secret Lab Technologies Ltd Grant Likely ********** DRAFT *********** @@ -20,11 +20,11 @@ described in Documentation/powerpc/booting-without-of.txt), or passed by Open Firmare (IEEE 1275) compatible firmware using an OF compatible client interface API. -This document specifies the requirements on the device-tree for mpc52xx +This document specifies the requirements on the device-tree for mpc5200 based boards. These requirements are above and beyond the details specified in either the OpenFirmware spec or booting-without-of.txt -All new mpc52xx-based boards are expected to match this document. In +All new mpc5200-based boards are expected to match this document. In cases where this document is not sufficient to support a new board port, this document should be updated as part of adding the new board support. @@ -32,26 +32,26 @@ II - Philosophy =============== The core of this document is naming convention. The whole point of defining this convention is to reduce or eliminate the number of -special cases required to support a 52xx board. If all 52xx boards -follow the same convention, then generic 52xx support code will work +special cases required to support a 5200 board. If all 5200 boards +follow the same convention, then generic 5200 support code will work rather than coding special cases for each new board. This section tries to capture the thought process behind why the naming convention is what it is. -1. Node names -------------- +1. names +--------- There is strong convention/requirements already established for children of the root node. 'cpus' describes the processor cores, 'memory' describes memory, and 'chosen' provides boot configuration. Other nodes are added to describe devices attached to the processor local bus. + Following convention already established with other system-on-chip -processors, MPC52xx boards must have an 'soc5200' node as a child of the -root node. +processors, 5200 device trees should use the name 'soc5200' for the +parent node of on chip devices, and the root node should be its parent. -The soc5200 node holds child nodes for all on chip devices. Child nodes -are typically named after the configured function. ie. the FEC node is -named 'ethernet', and a PSC in uart mode is named 'serial'. +Child nodes are typically named after the configured function. ie. +the FEC node is named 'ethernet', and a PSC in uart mode is named 'serial'. 2. device_type property ----------------------- @@ -66,28 +66,47 @@ exactly. Since device_type isn't enough to match devices to drivers, there also needs to be a naming convention for the compatible property. Compatible is an list of device descriptions sorted from specific to generic. For -the mpc52xx, the required format for each compatible value is --[-]. At the minimum, the list shall contain two -items; the first specifying the exact chip, and the second specifying -mpc52xx for the chip. - -ie. ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc52xx-ethernet" - -The idea here is that most drivers will match to the most generic field -in the compatible list (mpc52xx-*), but can also test the more specific -field for enabling bug fixes or extra features. +the mpc5200, the required format for each compatible value is +-[-]. The OS should be able to match a device driver +to the device based solely on the compatible value. If two drivers +match on the compatible list; the 'most compatible' driver should be +selected. + +The split between the MPC5200 and the MPC5200B leaves a bit of a +connundrum. How should the compatible property be set up to provide +maximum compatability information; but still acurately describe the +chip? For the MPC5200; the answer is easy. Most of the SoC devices +originally appeared on the MPC5200. Since they didn't exist anywhere +else; the 5200 compatible properties will contain only one item; +"mpc5200-". + +The 5200B is almost the same as the 5200, but not quite. It fixes +silicon bugs and it adds a small number of enhancements. Most of the +devices either provide exactly the same interface as on the 5200. A few +devices have extra functions but still have a backwards compatible mode. +To express this infomation as completely as possible, 5200B device trees +should have two items in the compatible list; +"mpc5200b-\0mpc5200-". It is *strongly* recommended +that 5200B device trees follow this convention (instead of only listing +the base mpc5200 item). + +If another chip appear on the market with one of the mpc5200 SoC +devices, then the compatible list should include mpc5200-. + +ie. ethernet on mpc5200: compatible = "mpc5200-ethernet" + ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc5200-ethernet" Modal devices, like PSCs, also append the configured function to the end of the compatible field. ie. A PSC in i2s mode would specify -"mpc52xx-psc-i2s", not "mpc52xx-i2s". This convention is chosen to +"mpc5200-psc-i2s", not "mpc5200-i2s". This convention is chosen to avoid naming conflicts with non-psc devices providing the same -function. For example, "mpc52xx-spi" and "mpc52xx-psc-spi" describe +function. For example, "mpc5200-spi" and "mpc5200-psc-spi" describe the mpc5200 simple spi device and a PSC spi mode respectively. If the soc device is more generic and present on other SOCs, the compatible property can specify the more generic device type also. -ie. mscan: compatible = "mpc5200-mscan\0mpc52xx-mscan\0fsl,mscan"; +ie. mscan: compatible = "mpc5200-mscan\0fsl,mscan"; At the time of writing, exact chip may be either 'mpc5200' or 'mpc5200b'. @@ -96,7 +115,7 @@ Device drivers should always try to match as generically as possible. III - Structure =============== -The device tree for an mpc52xx board follows the structure defined in +The device tree for an mpc5200 board follows the structure defined in booting-without-of.txt with the following additional notes: 0) the root node @@ -115,7 +134,7 @@ Typical memory description node; see booting-without-of. 3) The soc5200 node ------------------- -This node describes the on chip SOC peripherals. Every mpc52xx based +This node describes the on chip SOC peripherals. Every mpc5200 based board will have this node, and as such there is a common naming convention for SOC devices. @@ -125,71 +144,111 @@ name type description device_type string must be "soc" ranges int should be <0 baseaddr baseaddr+10000> reg int must be +compatible string mpc5200: "mpc5200-soc" + mpc5200b: "mpc5200b-soc\0mpc5200-soc" +system-frequency int Fsystem frequency; source of all + other clocks. +bus-frequency int IPB bus frequency in HZ. Clock rate + used by most of the soc devices. +#interrupt-cells int must be <3>. Recommended properties: name type description ---- ---- ----------- -compatible string should be "-soc\0mpc52xx-soc" - ie. "mpc5200b-soc\0mpc52xx-soc" -#interrupt-cells int must be <3>. If it is not defined - here then it must be defined in every - soc device node. -bus-frequency int IPB bus frequency in HZ. Clock rate - used by most of the soc devices. - Defining it here avoids needing it - added to every device node. +model string Exact model of the chip; + ie: model="fsl,mpc5200" +revision string Silicon revision of chip + ie: revision="M08A" + +The 'model' and 'revision' properties are *strongly* recommended. Having +them presence acts as a bit of a safety net for working around as yet +undiscovered bugs on one version of silicon. For example, device drivers +can use the model and revision properties to decide if a bug fix should +be turned on. 4) soc5200 child nodes ---------------------- Any on chip SOC devices available to Linux must appear as soc5200 child nodes. -Note: in the tables below, '*' matches all values. ie. -*-pic would translate to "mpc5200-pic\0mpc52xx-pic" +Note: The tables below show the value for the mpc5200. A mpc5200b device +tree should use the "mpc5200b-\0mpc5200- form. Required soc5200 child nodes: name device_type compatible Description ---- ----------- ---------- ----------- -cdm@ cdm *-cmd Clock Distribution -pic@ interrupt-controller *-pic need an interrupt +cdm@ cdm mpc5200-cmd Clock Distribution +pic@ interrupt-controller mpc5200-pic need an interrupt controller to boot -bestcomm@ dma-controller *-bestcomm 52xx pic also requires - the bestcomm device +bestcomm@ dma-controller mpc5200-bestcomm 5200 pic also requires + the bestcomm device Recommended soc5200 child nodes; populate as needed for your board -name device_type compatible Description ----- ----------- ---------- ----------- -gpt@ gpt *-gpt General purpose timers -rtc@ rtc *-rtc Real time clock -mscan@ mscan *-mscan CAN bus controller -pci@ pci *-pci PCI bridge -serial@ serial *-psc-uart PSC in serial mode -i2s@ sound *-psc-i2s PSC in i2s mode -ac97@ sound *-psc-ac97 PSC in ac97 mode -spi@ spi *-psc-spi PSC in spi mode -irda@ irda *-psc-irda PSC in IrDA mode -spi@ spi *-spi MPC52xx spi device -ethernet@ network *-fec MPC52xx ethernet device -ata@ ata *-ata IDE ATA interface -i2c@ i2c *-i2c I2C controller -usb@ usb-ohci-be *-ohci,ohci-be USB controller -xlb@ xlb *-xlb XLB arbritrator +name device_type compatible Description +---- ----------- ---------- ----------- +gpt@ gpt mpc5200-gpt General purpose timers +rtc@ rtc mpc5200-rtc Real time clock +mscan@ mscan mpc5200-mscan CAN bus controller +pci@ pci mpc5200-pci PCI bridge +serial@ serial mpc5200-psc-uart PSC in serial mode +i2s@ sound mpc5200-psc-i2s PSC in i2s mode +ac97@ sound mpc5200-psc-ac97 PSC in ac97 mode +spi@ spi mpc5200-psc-spi PSC in spi mode +irda@ irda mpc5200-psc-irda PSC in IrDA mode +spi@ spi mpc5200-spi MPC5200 spi device +ethernet@ network mpc5200-fec MPC5200 ethernet device +ata@ ata mpc5200-ata IDE ATA interface +i2c@ i2c mpc5200-i2c I2C controller +usb@ usb-ohci-be mpc5200-ohci,ohci-be USB controller +xlb@ xlb mpc5200-xlb XLB arbritrator + +Important child node properties +name type description +---- ---- ----------- +cell-index int When multiple devices are present, is the + index of the device in the hardware (ie. There + are 6 PSC on the 5200 numbered PSC1 to PSC6) + PSC1 has 'cell-index = <0>' + PSC4 has 'cell-index = <3>' + +5) General Purpose Timer nodes (child of soc5200 node) +On the mpc5200 and 5200b, GPT0 has a watchdog timer function. If the board +design supports the internal wdt, then the device node for GPT0 should +include the empty property 'has-wdt'. + +6) PSC nodes (child of soc5200 node) +PSC nodes can define the optional 'port-number' property to force assignment +order of serial ports. For example, PSC5 might be physically connected to +the port labeled 'COM1' and PSC1 wired to 'COM1'. In this case, PSC5 would +have a "port-number = <0>" property, and PSC1 would have "port-number = <1>". + +PSC in i2s mode: The mpc5200 and mpc5200b PSCs are not compatible when in +i2s mode. An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the +compatible field. IV - Extra Notes ================ 1. Interrupt mapping -------------------- -The mpc52xx pic driver splits hardware IRQ numbers into two levels. The +The mpc5200 pic driver splits hardware IRQ numbers into two levels. The split reflects the layout of the PIC hardware itself, which groups interrupts into one of three groups; CRIT, MAIN or PERP. Also, the Bestcomm dma engine has it's own set of interrupt sources which are cascaded off of peripheral interrupt 0, which the driver interprets as a fourth group, SDMA. -The interrupts property for device nodes using the mpc52xx pic consists +The interrupts property for device nodes using the mpc5200 pic consists of three cells; L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3] L2 := interrupt number; directly mapped from the value in the "ICTL PerStat, MainStat, CritStat Encoded Register" level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3] + +2. Shared registers +------------------- +Some SoC devices share registers between them. ie. the i2c devices use +a single clock control register, and almost all device are affected by +the port_config register. Devices which need to manipulate shared regs +should look to the parent SoC node. The soc node is responsible +for arbitrating all shared register access. diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 186870704ad9..c03103c63285 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -1,7 +1,7 @@ /* * Lite5200 board Device Tree Source * - * Copyright 2006 Secret Lab Technologies Ltd. + * Copyright 2006-2007 Secret Lab Technologies Ltd. * Grant Likely * * This program is free software; you can redistribute it and/or modify it @@ -17,8 +17,9 @@ */ / { - model = "Lite5200"; - compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx"; + model = "fsl,lite5200"; + // revision = "1.0"; + compatible = "fsl,lite5200\0generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -47,14 +48,17 @@ }; soc5200@f0000000 { + model = "fsl,mpc5200"; + revision = "" // from bootloader #interrupt-cells = <3>; device_type = "soc"; ranges = <0 f0000000 f0010000>; reg = ; bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200-cdm\0mpc52xx-cdm"; + compatible = "mpc5200-cdm"; reg = <200 38>; }; @@ -64,77 +68,86 @@ interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200-pic\0mpc52xx-pic"; + compatible = "mpc5200-pic"; reg = <500 80>; built-in; }; gpt@600 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <0>; reg = <600 10>; interrupts = <1 9 0>; interrupt-parent = <500>; + has-wdt; }; gpt@610 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <1>; reg = <610 10>; interrupts = <1 a 0>; interrupt-parent = <500>; }; gpt@620 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <2>; reg = <620 10>; interrupts = <1 b 0>; interrupt-parent = <500>; }; gpt@630 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <3>; reg = <630 10>; interrupts = <1 c 0>; interrupt-parent = <500>; }; gpt@640 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <4>; reg = <640 10>; interrupts = <1 d 0>; interrupt-parent = <500>; }; gpt@650 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <5>; reg = <650 10>; interrupts = <1 e 0>; interrupt-parent = <500>; }; gpt@660 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <6>; reg = <660 10>; interrupts = <1 f 0>; interrupt-parent = <500>; }; gpt@670 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <7>; reg = <670 10>; interrupts = <1 10 0>; interrupt-parent = <500>; }; rtc@800 { // Real time clock - compatible = "mpc5200-rtc\0mpc52xx-rtc"; + compatible = "mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; @@ -143,7 +156,8 @@ mscan@900 { device_type = "mscan"; - compatible = "mpc5200-mscan\0mpc52xx-mscan"; + compatible = "mpc5200-mscan"; + cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <500>; reg = <900 80>; @@ -151,21 +165,22 @@ mscan@980 { device_type = "mscan"; - compatible = "mpc5200-mscan\0mpc52xx-mscan"; + compatible = "mpc5200-mscan"; + cell-index = <1>; interrupts = <1 12 0>; interrupt-parent = <500>; reg = <980 80>; }; gpio@b00 { - compatible = "mpc5200-gpio\0mpc52xx-gpio"; + compatible = "mpc5200-gpio"; reg = ; interrupts = <1 7 0>; interrupt-parent = <500>; }; gpio-wkup@b00 { - compatible = "mpc5200-gpio-wkup\0mpc52xx-gpio-wkup"; + compatible = "mpc5200-gpio-wkup"; reg = ; interrupts = <1 8 0 0 3 0>; interrupt-parent = <500>; @@ -176,7 +191,7 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - compatible = "mpc5200-pci\0mpc52xx-pci"; + compatible = "mpc5200-pci"; reg = ; interrupt-map-mask = ; interrupt-map = ; interrupts = <2 d 0 2 e 0>; interrupt-parent = <500>; @@ -202,7 +217,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200-ohci\0mpc52xx-ohci\0ohci-be"; + compatible = "mpc5200-ohci\0ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <500>; @@ -210,7 +225,7 @@ bestcomm@1200 { device_type = "dma-controller"; - compatible = "mpc5200-bestcomm\0mpc52xx-bestcomm"; + compatible = "mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -220,67 +235,73 @@ }; xlb@1f00 { - compatible = "mpc5200-xlb\0mpc52xx-xlb"; + compatible = "mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + compatible = "mpc5200-psc-uart"; port-number = <0>; // Logical port assignment + cell-index = <0>; reg = <2000 100>; interrupts = <2 1 0>; interrupt-parent = <500>; }; - // PSC2 in spi mode example - spi@2200 { // PSC2 - device_type = "spi"; - compatible = "mpc5200-psc-spi\0mpc52xx-psc-spi"; - reg = <2200 100>; - interrupts = <2 2 0>; - interrupt-parent = <500>; - }; + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // device_type = "sound"; + // compatible = "mpc5200-psc-ac97"; + // cell-index = <1>; + // reg = <2200 100>; + // interrupts = <2 2 0>; + // interrupt-parent = <500>; + //}; // PSC3 in CODEC mode example - i2s@2400 { // PSC3 - device_type = "sound"; - compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s"; - reg = <2400 100>; - interrupts = <2 3 0>; - interrupt-parent = <500>; - }; + //i2s@2400 { // PSC3 + // device_type = "sound"; + // compatible = "mpc5200-psc-i2s"; + // cell-index = <2>; + // reg = <2400 100>; + // interrupts = <2 3 0>; + // interrupt-parent = <500>; + //}; - // PSC4 unconfigured + // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200-psc-uart"; + // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; // interrupt-parent = <500>; //}; - // PSC5 unconfigured + // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200-psc-uart"; + // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; // interrupt-parent = <500>; //}; - // PSC6 in AC97 mode example - ac97@2c00 { // PSC6 - device_type = "sound"; - compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97"; - reg = <2c00 100>; - interrupts = <2 4 0>; - interrupt-parent = <500>; - }; + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // device_type = "spi"; + // compatible = "mpc5200-psc-spi"; + // cell-index = <5>; + // reg = <2c00 100>; + // interrupts = <2 4 0>; + // interrupt-parent = <500>; + //}; ethernet@3000 { device_type = "network"; - compatible = "mpc5200-fec\0mpc52xx-fec"; + compatible = "mpc5200-fec"; reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; @@ -289,7 +310,7 @@ ata@3a00 { device_type = "ata"; - compatible = "mpc5200-ata\0mpc52xx-ata"; + compatible = "mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <500>; @@ -297,7 +318,8 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200-i2c\0mpc52xx-i2c"; + compatible = "mpc5200-i2c"; + cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; interrupt-parent = <500>; @@ -305,14 +327,15 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200-i2c\0mpc52xx-i2c"; + compatible = "mpc5200-i2c"; + cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <500>; }; sram@8000 { device_type = "sram"; - compatible = "mpc5200-sram\0mpc52xx-sram\0sram"; + compatible = "mpc5200-sram\0sram"; reg = <8000 4000>; }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 5bb2760d7c30..3875ca9a9a62 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -1,7 +1,7 @@ /* * Lite5200B board Device Tree Source * - * Copyright 2006 Secret Lab Technologies Ltd. + * Copyright 2006-2007 Secret Lab Technologies Ltd. * Grant Likely * * This program is free software; you can redistribute it and/or modify it @@ -17,8 +17,9 @@ */ / { - model = "Lite5200b"; - compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx"; + model = "fsl,lite5200b"; + // revision = "1.0"; + compatible = "fsl,lite5200b\0generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -47,14 +48,17 @@ }; soc5200@f0000000 { + model = "fsl,mpc5200b"; + revision = ""; // from bootloader #interrupt-cells = <3>; device_type = "soc"; ranges = <0 f0000000 f0010000>; reg = ; bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200b-cdm\0mpc52xx-cdm"; + compatible = "mpc5200b-cdm\0mpc5200-cdm"; reg = <200 38>; }; @@ -64,77 +68,86 @@ interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200b-pic\0mpc52xx-pic"; + compatible = "mpc5200b-pic\0mpc5200-pic"; reg = <500 80>; built-in; }; gpt@600 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <0>; reg = <600 10>; interrupts = <1 9 0>; interrupt-parent = <500>; + has-wdt; }; gpt@610 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <1>; reg = <610 10>; interrupts = <1 a 0>; interrupt-parent = <500>; }; gpt@620 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <2>; reg = <620 10>; interrupts = <1 b 0>; interrupt-parent = <500>; }; gpt@630 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <3>; reg = <630 10>; interrupts = <1 c 0>; interrupt-parent = <500>; }; gpt@640 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <4>; reg = <640 10>; interrupts = <1 d 0>; interrupt-parent = <500>; }; gpt@650 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <5>; reg = <650 10>; interrupts = <1 e 0>; interrupt-parent = <500>; }; gpt@660 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <6>; reg = <660 10>; interrupts = <1 f 0>; interrupt-parent = <500>; }; gpt@670 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <7>; reg = <670 10>; interrupts = <1 10 0>; interrupt-parent = <500>; }; rtc@800 { // Real time clock - compatible = "mpc5200b-rtc\0mpc52xx-rtc"; + compatible = "mpc5200b-rtc\0mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; @@ -143,7 +156,8 @@ mscan@900 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + compatible = "mpc5200b-mscan\0mpc5200-mscan"; + cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <500>; reg = <900 80>; @@ -151,21 +165,22 @@ mscan@980 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + compatible = "mpc5200b-mscan\0mpc5200-mscan"; + cell-index = <1>; interrupts = <1 12 0>; interrupt-parent = <500>; reg = <980 80>; }; gpio@b00 { - compatible = "mpc5200b-gpio\0mpc52xx-gpio"; + compatible = "mpc5200b-gpio\0mpc5200-gpio"; reg = ; interrupts = <1 7 0>; interrupt-parent = <500>; }; gpio-wkup@b00 { - compatible = "mpc5200b-gpio-wkup\0mpc52xx-gpio-wkup"; + compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup"; reg = ; interrupts = <1 8 0 0 3 0>; interrupt-parent = <500>; @@ -176,7 +191,7 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - compatible = "mpc5200b-pci\0mpc52xx-pci"; + compatible = "mpc5200b-pci\0mpc5200-pci"; reg = ; interrupt-map-mask = ; interrupt-map = ; interrupts = <2 d 0 2 e 0>; interrupt-parent = <500>; @@ -207,7 +222,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200b-ohci\0mpc52xx-ohci\0ohci-be"; + compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <500>; @@ -215,7 +230,7 @@ bestcomm@1200 { device_type = "dma-controller"; - compatible = "mpc5200b-bestcomm\0mpc52xx-bestcomm"; + compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -225,67 +240,73 @@ }; xlb@1f00 { - compatible = "mpc5200b-xlb\0mpc52xx-xlb"; + compatible = "mpc5200b-xlb\0mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; port-number = <0>; // Logical port assignment + cell-index = <0>; reg = <2000 100>; interrupts = <2 1 0>; interrupt-parent = <500>; }; - // PSC2 in spi mode example - spi@2200 { // PSC2 - device_type = "spi"; - compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi"; - reg = <2200 100>; - interrupts = <2 2 0>; - interrupt-parent = <500>; - }; + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // device_type = "sound"; + // compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97"; + // cell-index = <1>; + // reg = <2200 100>; + // interrupts = <2 2 0>; + // interrupt-parent = <500>; + //}; // PSC3 in CODEC mode example - i2s@2400 { // PSC3 - device_type = "sound"; - compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s"; - reg = <2400 100>; - interrupts = <2 3 0>; - interrupt-parent = <500>; - }; + //i2s@2400 { // PSC3 + // device_type = "sound"; + // compatible = "mpc5200b-psc-i2s"; //not 5200 compatible + // cell-index = <2>; + // reg = <2400 100>; + // interrupts = <2 3 0>; + // interrupt-parent = <500>; + //}; - // PSC4 unconfigured + // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; // interrupt-parent = <500>; //}; - // PSC5 unconfigured + // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; // interrupt-parent = <500>; //}; - // PSC6 in AC97 mode example - ac97@2c00 { // PSC6 - device_type = "sound"; - compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97"; - reg = <2c00 100>; - interrupts = <2 4 0>; - interrupt-parent = <500>; - }; + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // device_type = "spi"; + // compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi"; + // cell-index = <5>; + // reg = <2c00 100>; + // interrupts = <2 4 0>; + // interrupt-parent = <500>; + //}; ethernet@3000 { device_type = "network"; - compatible = "mpc5200b-fec\0mpc52xx-fec"; + compatible = "mpc5200b-fec\0mpc5200-fec"; reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; @@ -294,7 +315,7 @@ ata@3a00 { device_type = "ata"; - compatible = "mpc5200b-ata\0mpc52xx-ata"; + compatible = "mpc5200b-ata\0mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <500>; @@ -302,7 +323,8 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + compatible = "mpc5200b-i2c\0mpc5200-i2c"; + cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; interrupt-parent = <500>; @@ -310,14 +332,15 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + compatible = "mpc5200b-i2c\0mpc5200-i2c"; + cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <500>; }; sram@8000 { device_type = "sram"; - compatible = "mpc5200b-sram\0mpc52xx-sram\0sram"; + compatible = "mpc5200b-sram\0mpc5200-sram\0sram"; reg = <8000 4000>; }; }; -- cgit v1.2.2 From 88fd2a9d681f261ebd55a6843a03ea2a1bb9eb39 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:20 +0100 Subject: [POWERPC] Add device tree fixups for the EFIKA We make the efika device tree compliant with the defined bindings (at least compliant enough). This is mostly done by mangling the device_type and compatible properties, but also adding some missing bits. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_init.c | 81 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 520ef42f642e..4fb5938ce6d3 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2117,11 +2117,92 @@ static void __init fixup_device_tree_pmac(void) #define fixup_device_tree_pmac() #endif +#ifdef CONFIG_PPC_EFIKA +/* The current fw of the Efika has a device tree needs quite a few + * fixups to be compliant with the mpc52xx bindings. It's currently + * unknown if it will ever be compliant (come on bPlan ...) so we do fixups. + * NOTE that we (barely) tolerate it because the EFIKA was out before + * the bindings were finished, for any new boards -> RTFM ! */ + +struct subst_entry { + char *path; + char *property; + void *value; + int value_len; +}; + +static void __init fixup_device_tree_efika(void) +{ + /* Substitution table */ + #define prop_cstr(x) x, sizeof(x) + int prop_sound_irq[3] = { 2, 2, 0 }; + int prop_bcomm_irq[3*16] = { 3,0,0, 3,1,0, 3,2,0, 3,3,0, + 3,4,0, 3,5,0, 3,6,0, 3,7,0, + 3,8,0, 3,9,0, 3,10,0, 3,11,0, + 3,12,0, 3,13,0, 3,14,0, 3,15,0 }; + struct subst_entry efika_subst_table[] = { + { "/", "device_type", prop_cstr("efika") }, + { "/builtin", "compatible", prop_cstr("soc") }, + { "/builtin/ata", "compatible", prop_cstr("mpc5200b-ata\0mpc5200-ata"), }, + { "/builtin/bestcomm", "compatible", prop_cstr("mpc5200b-bestcomm\0mpc5200-bestcomm") }, + { "/builtin/bestcomm", "interrupts", prop_bcomm_irq, sizeof(prop_bcomm_irq) }, + { "/builtin/ethernet", "compatible", prop_cstr("mpc5200b-fec\0mpc5200-fec") }, + { "/builtin/pic", "compatible", prop_cstr("mpc5200b-pic\0mpc5200-pic") }, + { "/builtin/serial", "compatible", prop_cstr("mpc5200b-psc-uart\0mpc5200-psc-uart") }, + { "/builtin/sound", "compatible", prop_cstr("mpc5200b-psc-ac97\0mpc5200-psc-ac97") }, + { "/builtin/sound", "interrupts", prop_sound_irq, sizeof(prop_sound_irq) }, + { "/builtin/sram", "compatible", prop_cstr("mpc5200b-sram\0mpc5200-sram") }, + { "/builtin/sram", "device_type", prop_cstr("sram") }, + {} + }; + #undef prop_cstr + + /* Vars */ + u32 node; + char prop[64]; + int rv, i; + + /* Check if we're really running on a EFIKA */ + node = call_prom("finddevice", 1, 1, ADDR("/")); + if (!PHANDLE_VALID(node)) + return; + + rv = prom_getprop(node, "model", prop, sizeof(prop)); + if (rv == PROM_ERROR) + return; + if (strcmp(prop, "EFIKA5K2")) + return; + + prom_printf("Applying EFIKA device tree fixups\n"); + + /* Process substitution table */ + for (i=0; efika_subst_table[i].path; i++) { + struct subst_entry *se = &efika_subst_table[i]; + + node = call_prom("finddevice", 1, 1, ADDR(se->path)); + if (!PHANDLE_VALID(node)) { + prom_printf("fixup_device_tree_efika: ", + "skipped entry %x - not found\n", i); + continue; + } + + rv = prom_setprop(node, se->path, se->property, + se->value, se->value_len ); + if (rv == PROM_ERROR) + prom_printf("fixup_device_tree_efika: ", + "skipped entry %x - setprop error\n", i); + } +} +#else +#define fixup_device_tree_efika() +#endif + static void __init fixup_device_tree(void) { fixup_device_tree_maple(); fixup_device_tree_chrp(); fixup_device_tree_pmac(); + fixup_device_tree_efika(); } static void __init prom_find_boot_cpu(void) -- cgit v1.2.2 From b6a591b2c59935eef5dd31790323ca6014e28f01 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:21 +0100 Subject: [POWERPC] Restore 'proper' link order in platform The 52xx was put before CHRP to allow EFIKA to be recognized properly. Now the efika tree is fixed up in prom_init so no need for this ugly hack. So we restore the 'normal' order. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 65e612315b9b..452004283f17 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -5,9 +5,9 @@ ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_PPC_PMAC) += powermac/ endif endif -obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ +obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_8xx) += 8xx/ obj-$(CONFIG_PPC_82xx) += 82xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ -- cgit v1.2.2 From 82a03b92279f2ea80e11dc2c419fdaa3800401a2 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:22 +0100 Subject: [POWERPC] Use common 52xx of_platform probe code for EFIKA Now that the device tree has the good properties, we can remove all the efika_init code by a single call to common code. While we're modifying that file, a few whitespaces/alignement/typo fixes are made (nothing significant). Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/efika-setup.c | 64 +++++++++---------------------- 1 file changed, 18 insertions(+), 46 deletions(-) diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c index 110c980ed1e0..d61ce84e201f 100644 --- a/arch/powerpc/platforms/52xx/efika-setup.c +++ b/arch/powerpc/platforms/52xx/efika-setup.c @@ -2,7 +2,7 @@ * * Efika 5K2 platform setup * Some code really inspired from the lite5200b platform. - * + * * Copyright (C) 2006 bplan GmbH * * This file is licensed under the terms of the GNU General Public License @@ -81,35 +81,7 @@ static void __init efika_setup_arch(void) efika_pcisetup(); if (ppc_md.progress) - ppc_md.progress("Linux/PPC " UTS_RELEASE " runnung on Efika ;-)\n", 0x0); -} - -static void __init efika_init(void) -{ - struct device_node *np; - struct device_node *cnp = NULL; - const u32 *base; - - /* Find every child of the SOC node and add it to of_platform */ - np = of_find_node_by_name(NULL, "builtin"); - if (np) { - char name[BUS_ID_SIZE]; - while ((cnp = of_get_next_child(np, cnp))) { - strcpy(name, cnp->name); - - base = get_property(cnp, "reg", NULL); - if (base == NULL) - continue; - - snprintf(name+strlen(name), BUS_ID_SIZE, "@%x", *base); - of_platform_device_create(cnp, name, NULL); - - printk(KERN_INFO EFIKA_PLATFORM_NAME" : Added %s (type '%s' at '%s') to the known devices\n", name, cnp->type, cnp->full_name); - } - } - - if (ppc_md.progress) - ppc_md.progress(" Have fun with your Efika! ", 0x7777); + ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); } static int __init efika_probe(void) @@ -131,20 +103,20 @@ static int __init efika_probe(void) define_machine(efika) { - .name = EFIKA_PLATFORM_NAME, - .probe = efika_probe, - .setup_arch = efika_setup_arch, - .init = efika_init, - .show_cpuinfo = efika_show_cpuinfo, - .init_IRQ = mpc52xx_init_irq, - .get_irq = mpc52xx_get_irq, - .restart = rtas_restart, - .power_off = rtas_power_off, - .halt = rtas_halt, - .set_rtc_time = rtas_set_rtc_time, - .get_rtc_time = rtas_get_rtc_time, - .progress = rtas_progress, - .get_boot_time = rtas_get_boot_time, - .calibrate_decr = generic_calibrate_decr, - .phys_mem_access_prot = pci_phys_mem_access_prot, + .name = EFIKA_PLATFORM_NAME, + .probe = efika_probe, + .setup_arch = efika_setup_arch, + .init = mpc52xx_declare_of_platform_devices, + .show_cpuinfo = efika_show_cpuinfo, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .set_rtc_time = rtas_set_rtc_time, + .get_rtc_time = rtas_get_rtc_time, + .progress = rtas_progress, + .get_boot_time = rtas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, }; -- cgit v1.2.2 From 46e4cf6c14e0a5b8916a1236a7079ccad3f4352a Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:23 +0100 Subject: [POWERPC] Fix unbalanced of_node_{get,put} in efika-setup.c Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/efika-setup.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c index d61ce84e201f..b6945cbbfba6 100644 --- a/arch/powerpc/platforms/52xx/efika-setup.c +++ b/arch/powerpc/platforms/52xx/efika-setup.c @@ -42,14 +42,13 @@ static void efika_show_cpuinfo(struct seq_file *m) const char *codegenvendor = NULL; root = of_find_node_by_path("/"); - if (root) { - revision = get_property(root, "revision", NULL); - codegendescription = - get_property(root, "CODEGEN,description", NULL); - codegenvendor = get_property(root, "CODEGEN,vendor", NULL); + if (!root) + return; - of_node_put(root); - } + revision = get_property(root, "revision", NULL); + codegendescription = + get_property(root, "CODEGEN,description", NULL); + codegenvendor = get_property(root, "CODEGEN,vendor", NULL); if (codegendescription) seq_printf(m, "machine\t\t: %s\n", codegendescription); -- cgit v1.2.2 From 9724b86f0706ca9b552d82e013cb0c208b4f5529 Mon Sep 17 00:00:00 2001 From: Sylvain Munaut Date: Mon, 12 Feb 2007 23:13:24 +0100 Subject: [POWERPC] Small cleanup of EFIKA platform The efika platform used three files efika-pci.c efika-setup.c and a 2 line efika.h to link the two. The total of code in those is really not much and therefore, I think they're better merged in a single file. There is absolutely _no_code_change_ at all, just merged the files. Signed-off-by: Sylvain Munaut Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/52xx/Makefile | 2 +- arch/powerpc/platforms/52xx/efika-pci.c | 119 --------------- arch/powerpc/platforms/52xx/efika-setup.c | 121 --------------- arch/powerpc/platforms/52xx/efika.c | 243 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/52xx/efika.h | 19 --- 5 files changed, 244 insertions(+), 260 deletions(-) delete mode 100644 arch/powerpc/platforms/52xx/efika-pci.c delete mode 100644 arch/powerpc/platforms/52xx/efika-setup.c create mode 100644 arch/powerpc/platforms/52xx/efika.c delete mode 100644 arch/powerpc/platforms/52xx/efika.h diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index 795b713ec9ee..07cdbcacf156 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -6,5 +6,5 @@ obj-y += mpc52xx_pic.o mpc52xx_common.o obj-$(CONFIG_PCI) += mpc52xx_pci.o endif -obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o +obj-$(CONFIG_PPC_EFIKA) += efika.o obj-$(CONFIG_PPC_LITE5200) += lite5200.o diff --git a/arch/powerpc/platforms/52xx/efika-pci.c b/arch/powerpc/platforms/52xx/efika-pci.c deleted file mode 100644 index 62e05b2a9227..000000000000 --- a/arch/powerpc/platforms/52xx/efika-pci.c +++ /dev/null @@ -1,119 +0,0 @@ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "efika.h" - -#ifdef CONFIG_PCI -/* - * Access functions for PCI config space using RTAS calls. - */ -static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 * val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int ret = -1; - int rval; - - rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); - *val = ret; - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int rval; - - rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, - addr, len, val); - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops rtas_pci_ops = { - rtas_read_config, - rtas_write_config -}; - -void __init efika_pcisetup(void) -{ - const int *bus_range; - int len; - struct pci_controller *hose; - struct device_node *root; - struct device_node *pcictrl; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the root node\n"); - return; - } - - for (pcictrl = NULL;;) { - pcictrl = of_get_next_child(root, pcictrl); - if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) - break; - } - - of_node_put(root); - - if (pcictrl == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the PCI bridge node\n"); - return; - } - - bus_range = get_property(pcictrl, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't get bus-range for %s\n", pcictrl->full_name); - return; - } - - if (bus_range[1] == bus_range[0]) - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", - bus_range[0]); - else - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", - bus_range[0], bus_range[1]); - printk(" controlled by %s\n", pcictrl->full_name); - printk("\n"); - - hose = pcibios_alloc_controller(); - if (!hose) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't allocate PCI controller structure for %s\n", - pcictrl->full_name); - return; - } - - hose->arch_data = of_node_get(pcictrl); - hose->first_busno = bus_range[0]; - hose->last_busno = bus_range[1]; - hose->ops = &rtas_pci_ops; - - pci_process_bridge_OF_ranges(hose, pcictrl, 0); -} - -#else -void __init efika_pcisetup(void) -{} -#endif diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c deleted file mode 100644 index b6945cbbfba6..000000000000 --- a/arch/powerpc/platforms/52xx/efika-setup.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * - * Efika 5K2 platform setup - * Some code really inspired from the lite5200b platform. - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "efika.h" - -static void efika_show_cpuinfo(struct seq_file *m) -{ - struct device_node *root; - const char *revision = NULL; - const char *codegendescription = NULL; - const char *codegenvendor = NULL; - - root = of_find_node_by_path("/"); - if (!root) - return; - - revision = get_property(root, "revision", NULL); - codegendescription = - get_property(root, "CODEGEN,description", NULL); - codegenvendor = get_property(root, "CODEGEN,vendor", NULL); - - if (codegendescription) - seq_printf(m, "machine\t\t: %s\n", codegendescription); - else - seq_printf(m, "machine\t\t: Efika\n"); - - if (revision) - seq_printf(m, "revision\t: %s\n", revision); - - if (codegenvendor) - seq_printf(m, "vendor\t\t: %s\n", codegenvendor); - - of_node_put(root); -} - -static void __init efika_setup_arch(void) -{ - rtas_initialize(); - -#ifdef CONFIG_BLK_DEV_INITRD - initrd_below_start_ok = 1; - - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ - - efika_pcisetup(); - - if (ppc_md.progress) - ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); -} - -static int __init efika_probe(void) -{ - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - - if (model == NULL) - return 0; - if (strcmp(model, "EFIKA5K2")) - return 0; - - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - - return 1; -} - -define_machine(efika) -{ - .name = EFIKA_PLATFORM_NAME, - .probe = efika_probe, - .setup_arch = efika_setup_arch, - .init = mpc52xx_declare_of_platform_devices, - .show_cpuinfo = efika_show_cpuinfo, - .init_IRQ = mpc52xx_init_irq, - .get_irq = mpc52xx_get_irq, - .restart = rtas_restart, - .power_off = rtas_power_off, - .halt = rtas_halt, - .set_rtc_time = rtas_set_rtc_time, - .get_rtc_time = rtas_get_rtc_time, - .progress = rtas_progress, - .get_boot_time = rtas_get_boot_time, - .calibrate_decr = generic_calibrate_decr, - .phys_mem_access_prot = pci_phys_mem_access_prot, -}; diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c new file mode 100644 index 000000000000..8de034116681 --- /dev/null +++ b/arch/powerpc/platforms/52xx/efika.c @@ -0,0 +1,243 @@ +/* + * Efika 5K2 platform code + * Some code really inspired from the lite5200b platform. + * + * Copyright (C) 2006 bplan GmbH + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define EFIKA_PLATFORM_NAME "Efika" + + +/* ------------------------------------------------------------------------ */ +/* PCI accesses thru RTAS */ +/* ------------------------------------------------------------------------ */ + +#ifdef CONFIG_PCI + +/* + * Access functions for PCI config space using RTAS calls. + */ +static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int ret = -1; + int rval; + + rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); + *val = ret; + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int rval; + + rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, + addr, len, val); + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rtas_pci_ops = { + rtas_read_config, + rtas_write_config +}; + + +void __init efika_pcisetup(void) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + struct device_node *root; + struct device_node *pcictrl; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the root node\n"); + return; + } + + for (pcictrl = NULL;;) { + pcictrl = of_get_next_child(root, pcictrl); + if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) + break; + } + + of_node_put(root); + + if (pcictrl == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the PCI bridge node\n"); + return; + } + + bus_range = get_property(pcictrl, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't get bus-range for %s\n", pcictrl->full_name); + return; + } + + if (bus_range[1] == bus_range[0]) + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", + bus_range[0]); + else + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", + bus_range[0], bus_range[1]); + printk(" controlled by %s\n", pcictrl->full_name); + printk("\n"); + + hose = pcibios_alloc_controller(); + if (!hose) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't allocate PCI controller structure for %s\n", + pcictrl->full_name); + return; + } + + hose->arch_data = of_node_get(pcictrl); + hose->first_busno = bus_range[0]; + hose->last_busno = bus_range[1]; + hose->ops = &rtas_pci_ops; + + pci_process_bridge_OF_ranges(hose, pcictrl, 0); +} + +#else +void __init efika_pcisetup(void) +{} +#endif + + + +/* ------------------------------------------------------------------------ */ +/* Platform setup */ +/* ------------------------------------------------------------------------ */ + +static void efika_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *revision = NULL; + const char *codegendescription = NULL; + const char *codegenvendor = NULL; + + root = of_find_node_by_path("/"); + if (!root) + return; + + revision = get_property(root, "revision", NULL); + codegendescription = + get_property(root, "CODEGEN,description", NULL); + codegenvendor = get_property(root, "CODEGEN,vendor", NULL); + + if (codegendescription) + seq_printf(m, "machine\t\t: %s\n", codegendescription); + else + seq_printf(m, "machine\t\t: Efika\n"); + + if (revision) + seq_printf(m, "revision\t: %s\n", revision); + + if (codegenvendor) + seq_printf(m, "vendor\t\t: %s\n", codegenvendor); + + of_node_put(root); +} + +static void __init efika_setup_arch(void) +{ + rtas_initialize(); + +#ifdef CONFIG_BLK_DEV_INITRD + initrd_below_start_ok = 1; + + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ + + efika_pcisetup(); + + if (ppc_md.progress) + ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); +} + +static int __init efika_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + + if (model == NULL) + return 0; + if (strcmp(model, "EFIKA5K2")) + return 0; + + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + + return 1; +} + +define_machine(efika) +{ + .name = EFIKA_PLATFORM_NAME, + .probe = efika_probe, + .setup_arch = efika_setup_arch, + .init = mpc52xx_declare_of_platform_devices, + .show_cpuinfo = efika_show_cpuinfo, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .set_rtc_time = rtas_set_rtc_time, + .get_rtc_time = rtas_get_rtc_time, + .progress = rtas_progress, + .get_boot_time = rtas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +}; + diff --git a/arch/powerpc/platforms/52xx/efika.h b/arch/powerpc/platforms/52xx/efika.h deleted file mode 100644 index 2f060fd097d7..000000000000 --- a/arch/powerpc/platforms/52xx/efika.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Efika 5K2 platform setup - Header file - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#ifndef __ARCH_POWERPC_EFIKA__ -#define __ARCH_POWERPC_EFIKA__ - -#define EFIKA_PLATFORM_NAME "Efika" - -extern void __init efika_pcisetup(void); - -#endif -- cgit v1.2.2 From 78bde53e351bc89cff85d1c2c7e6d7c2ffdf120d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 13 Feb 2007 11:46:06 +1100 Subject: [POWERPC] spufs: remove need for struct page for SPEs This patch removes the need for struct page for SPE local store and registers from spufs. It also makes the locking much more obvious and no longer relying on the truncate logic black magic for protecting against races between unmap_mapping_range() and new pages faulted in. It does so by switching to a nopfn() handler and using the new vm_insert_pfn() to setup the PTEs itself while holding a lock on the SPE. The nice thing is that this patch actually removes a lot more code than it adds :-) Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 2 +- arch/powerpc/platforms/cell/spu_manage.c | 102 ++++++-------------------- arch/powerpc/platforms/cell/spufs/file.c | 121 ++++++++++++++----------------- 3 files changed, 80 insertions(+), 145 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0088c5ebca78..340d9beab6d1 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -876,7 +876,7 @@ config ARCH_SPARSEMEM_ENABLE config ARCH_SPARSEMEM_DEFAULT def_bool y - depends on (SMP && PPC_PSERIES) || PPC_CELL + depends on (SMP && PPC_PSERIES) || PPC_PS3 config ARCH_POPULATES_NODE_MAP def_bool y diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index d8b39fe39cdd..e34599f53d28 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -59,63 +59,6 @@ static u64 __init find_spu_unit_number(struct device_node *spe) return 0; } -static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe, - const char *prop) -{ - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *p; - int proplen; - - unsigned long start_pfn, nr_pages; - struct pglist_data *pgdata; - struct zone *zone; - int ret; - - p = get_property(spe, prop, &proplen); - WARN_ON(proplen != sizeof (*p)); - - start_pfn = p->address >> PAGE_SHIFT; - nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(spu->node); - zone = pgdata->node_zones; - - ret = __add_pages(zone, start_pfn, nr_pages); - - return ret; -} - -static void __iomem * __init map_spe_prop(struct spu *spu, - struct device_node *n, const char *name) -{ - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *prop; - - const void *p; - int proplen; - void __iomem *ret = NULL; - int err = 0; - - p = get_property(n, name, &proplen); - if (proplen != sizeof (struct address_prop)) - return NULL; - - prop = p; - - err = cell_spuprop_present(spu, n, name); - if (err && (err != -EEXIST)) - goto out; - - ret = ioremap(prop->address, prop->len); - - out: - return ret; -} - static void spu_unmap(struct spu *spu) { if (!firmware_has_feature(FW_FEATURE_LPAR)) @@ -157,6 +100,23 @@ static int __init spu_map_interrupts_old(struct spu *spu, return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; } +static void __iomem * __init spu_map_prop_old(struct spu *spu, + struct device_node *n, + const char *name) +{ + const struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *prop; + int proplen; + + prop = get_property(n, name, &proplen); + if (prop == NULL || proplen != sizeof (struct address_prop)) + return NULL; + + return ioremap(prop->address, prop->len); +} + static int __init spu_map_device_old(struct spu *spu) { struct device_node *node = spu->devnode; @@ -175,7 +135,7 @@ static int __init spu_map_device_old(struct spu *spu) /* we use local store as ram, not io memory */ spu->local_store = (void __force *) - map_spe_prop(spu, node, "local-store"); + spu_map_prop_old(spu, node, "local-store"); if (!spu->local_store) goto out; @@ -184,16 +144,16 @@ static int __init spu_map_device_old(struct spu *spu) goto out_unmap; spu->problem_phys = *(unsigned long *)prop; - spu->problem = map_spe_prop(spu, node, "problem"); + spu->problem = spu_map_prop_old(spu, node, "problem"); if (!spu->problem) goto out_unmap; - spu->priv2 = map_spe_prop(spu, node, "priv2"); + spu->priv2 = spu_map_prop_old(spu, node, "priv2"); if (!spu->priv2) goto out_unmap; if (!firmware_has_feature(FW_FEATURE_LPAR)) { - spu->priv1 = map_spe_prop(spu, node, "priv1"); + spu->priv1 = spu_map_prop_old(spu, node, "priv1"); if (!spu->priv1) goto out_unmap; } @@ -245,34 +205,20 @@ static int spu_map_resource(struct spu *spu, int nr, void __iomem** virt, unsigned long *phys) { struct device_node *np = spu->devnode; - unsigned long start_pfn, nr_pages; - struct pglist_data *pgdata; - struct zone *zone; struct resource resource = { }; unsigned long len; int ret; ret = of_address_to_resource(np, nr, &resource); if (ret) - goto out; - + return ret; if (phys) *phys = resource.start; len = resource.end - resource.start + 1; *virt = ioremap(resource.start, len); if (!*virt) - ret = -EINVAL; - - start_pfn = resource.start >> PAGE_SHIFT; - nr_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(spu->node); - zone = pgdata->node_zones; - - ret = __add_pages(zone, start_pfn, nr_pages); - -out: - return ret; + return -EINVAL; + return 0; } static int __init spu_map_device(struct spu *spu) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index af9e9455a706..7fb9a6dc4f18 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -95,14 +95,12 @@ spufs_mem_write(struct file *file, const char __user *buffer, return ret; } -static struct page * -spufs_mem_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - struct page *page = NOPAGE_SIGBUS; - struct spu_context *ctx = vma->vm_file->private_data; - unsigned long offset = address - vma->vm_start; + unsigned long pfn, offset = address - vma->vm_start; + offset += vma->vm_pgoff << PAGE_SHIFT; spu_acquire(ctx); @@ -110,24 +108,22 @@ spufs_mem_mmap_nopage(struct vm_area_struct *vma, if (ctx->state == SPU_STATE_SAVED) { vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) & ~_PAGE_NO_CACHE); - page = vmalloc_to_page(ctx->csa.lscsa->ls + offset); + pfn = vmalloc_to_pfn(ctx->csa.lscsa->ls + offset); } else { vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); - page = pfn_to_page((ctx->spu->local_store_phys + offset) - >> PAGE_SHIFT); + | _PAGE_NO_CACHE); + pfn = (ctx->spu->local_store_phys + offset) >> PAGE_SHIFT; } - spu_release(ctx); + vm_insert_pfn(vma, address, pfn); - if (type) - *type = VM_FAULT_MINOR; + spu_release(ctx); - page_cache_get(page); - return page; + return NOPFN_REFAULT; } + static struct vm_operations_struct spufs_mem_mmap_vmops = { - .nopage = spufs_mem_mmap_nopage, + .nopfn = spufs_mem_mmap_nopfn, }; static int @@ -136,7 +132,7 @@ spufs_mem_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE); @@ -152,49 +148,42 @@ static const struct file_operations spufs_mem_fops = { .mmap = spufs_mem_mmap, }; -static struct page *spufs_ps_nopage(struct vm_area_struct *vma, +static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, unsigned long address, - int *type, unsigned long ps_offs, + unsigned long ps_offs, unsigned long ps_size) { - struct page *page = NOPAGE_SIGBUS; - int fault_type = VM_FAULT_SIGBUS; struct spu_context *ctx = vma->vm_file->private_data; - unsigned long offset = address - vma->vm_start; - unsigned long area; + unsigned long area, offset = address - vma->vm_start; int ret; offset += vma->vm_pgoff << PAGE_SHIFT; if (offset >= ps_size) - goto out; + return NOPFN_SIGBUS; + /* error here usually means a signal.. we might want to test + * the error code more precisely though + */ ret = spu_acquire_runnable(ctx); if (ret) - goto out; + return NOPFN_REFAULT; area = ctx->spu->problem_phys + ps_offs; - page = pfn_to_page((area + offset) >> PAGE_SHIFT); - fault_type = VM_FAULT_MINOR; - page_cache_get(page); - + vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT); spu_release(ctx); - out: - if (type) - *type = fault_type; - - return page; + return NOPFN_REFAULT; } #if SPUFS_MMAP_4K -static struct page *spufs_cntl_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_cntl_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x4000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x4000, 0x1000); } static struct vm_operations_struct spufs_cntl_mmap_vmops = { - .nopage = spufs_cntl_mmap_nopage, + .nopfn = spufs_cntl_mmap_nopfn, }; /* @@ -205,7 +194,7 @@ static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -791,23 +780,23 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf, return 4; } -static struct page *spufs_signal1_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_signal1_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { #if PAGE_SIZE == 0x1000 - return spufs_ps_nopage(vma, address, type, 0x14000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x14000, 0x1000); #elif PAGE_SIZE == 0x10000 /* For 64k pages, both signal1 and signal2 can be used to mmap the whole * signal 1 and 2 area */ - return spufs_ps_nopage(vma, address, type, 0x10000, 0x10000); + return spufs_ps_nopfn(vma, address, 0x10000, 0x10000); #else #error unsupported page size #endif } static struct vm_operations_struct spufs_signal1_mmap_vmops = { - .nopage = spufs_signal1_mmap_nopage, + .nopfn = spufs_signal1_mmap_nopfn, }; static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) @@ -815,7 +804,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -899,23 +888,23 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf, } #if SPUFS_MMAP_4K -static struct page *spufs_signal2_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_signal2_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { #if PAGE_SIZE == 0x1000 - return spufs_ps_nopage(vma, address, type, 0x1c000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x1c000, 0x1000); #elif PAGE_SIZE == 0x10000 /* For 64k pages, both signal1 and signal2 can be used to mmap the whole * signal 1 and 2 area */ - return spufs_ps_nopage(vma, address, type, 0x10000, 0x10000); + return spufs_ps_nopfn(vma, address, 0x10000, 0x10000); #else #error unsupported page size #endif } static struct vm_operations_struct spufs_signal2_mmap_vmops = { - .nopage = spufs_signal2_mmap_nopage, + .nopfn = spufs_signal2_mmap_nopfn, }; static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) @@ -923,7 +912,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1000,14 +989,14 @@ DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get, spufs_signal2_type_set, "%llu"); #if SPUFS_MMAP_4K -static struct page *spufs_mss_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x0000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x0000, 0x1000); } static struct vm_operations_struct spufs_mss_mmap_vmops = { - .nopage = spufs_mss_mmap_nopage, + .nopfn = spufs_mss_mmap_nopfn, }; /* @@ -1018,7 +1007,7 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1042,14 +1031,14 @@ static const struct file_operations spufs_mss_fops = { .mmap = spufs_mss_mmap, }; -static struct page *spufs_psmap_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_psmap_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x0000, 0x20000); + return spufs_ps_nopfn(vma, address, 0x0000, 0x20000); } static struct vm_operations_struct spufs_psmap_mmap_vmops = { - .nopage = spufs_psmap_mmap_nopage, + .nopfn = spufs_psmap_mmap_nopfn, }; /* @@ -1060,7 +1049,7 @@ static int spufs_psmap_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1083,14 +1072,14 @@ static const struct file_operations spufs_psmap_fops = { #if SPUFS_MMAP_4K -static struct page *spufs_mfc_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mfc_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x3000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x3000, 0x1000); } static struct vm_operations_struct spufs_mfc_mmap_vmops = { - .nopage = spufs_mfc_mmap_nopage, + .nopfn = spufs_mfc_mmap_nopfn, }; /* @@ -1101,7 +1090,7 @@ static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); -- cgit v1.2.2 From 44430e0d3916ab6aaf0451fdb811f4f1803b741e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 13 Feb 2007 11:46:07 +1100 Subject: [POWERPC] powerpc: Remove SPU struct pages for PS3 Struct page are no longer needed for SPUs, so let's not create them on PS3 anymore. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/spu.c | 42 ++-------------------------------------- 1 file changed, 2 insertions(+), 40 deletions(-) diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index d1929721b0e4..a397e4e17c13 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -170,31 +170,6 @@ static int __init construct_spu(struct spu *spu) return result; } -static int __init add_spu_pages(unsigned long start_addr, unsigned long size) -{ - int result; - unsigned long start_pfn; - unsigned long nr_pages; - struct pglist_data *pgdata; - struct zone *zone; - - BUG_ON(!mem_init_done); - - start_pfn = start_addr >> PAGE_SHIFT; - nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(0); - zone = pgdata->node_zones; - - result = __add_pages(zone, start_pfn, nr_pages); - - if (result) - pr_debug("%s:%d: __add_pages failed: (%d)\n", - __func__, __LINE__, result); - - return result; -} - static void spu_unmap(struct spu *spu) { iounmap(spu->priv2); @@ -206,19 +181,6 @@ static void spu_unmap(struct spu *spu) static int __init setup_areas(struct spu *spu) { struct table {char* name; unsigned long addr; unsigned long size;}; - int result; - - /* setup pages */ - - result = add_spu_pages(spu->local_store_phys, LS_SIZE); - if (result) - goto fail_add; - - result = add_spu_pages(spu->problem_phys, sizeof(struct spu_problem)); - if (result) - goto fail_add; - - /* ioremap */ spu_pdata(spu)->shadow = __ioremap( spu_pdata(spu)->shadow_addr, sizeof(struct spe_shadow), @@ -260,8 +222,8 @@ static int __init setup_areas(struct spu *spu) fail_ioremap: spu_unmap(spu); -fail_add: - return result; + + return -ENOMEM; } static int __init setup_interrupts(struct spu *spu) -- cgit v1.2.2 From 17e0e27020d028a790d97699aff85a43af5be472 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 13 Feb 2007 11:46:08 +1100 Subject: [POWERPC] spufs: Fix bitrot of the SPU mmap facility It looks like we've had some serious bitrot there mostly due to tracking of address_space's of mmap'ed files getting out of sync with the actual mmap code. The mfc, mss and psmap were not tracked properly and thus not invalidated on context switches (oops !) I also removed the various file->f_mapping = inode->i_mapping; assignments that were done in the other open() routines since that is already done for us by __dentry_open. One improvement we might want to do later is to assign the various ctx-> fields at mmap time instead of file open/close time so that we don't call unmap_mapping_range() on thing that have not been mmap'ed Finally, I added some smp_wmb's after assigning the ctx-> fields to make sure they are visible to other CPUs. I don't think this is really necessary as I suspect locking in the fs layer will make that happen anyway but better safe than sorry. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/context.c | 12 ++++++++---- arch/powerpc/platforms/cell/spufs/file.c | 16 ++++++++++++---- arch/powerpc/platforms/cell/spufs/spufs.h | 2 ++ 3 files changed, 22 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 0870009f56db..28c718ca3b51 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -111,13 +111,17 @@ void spu_unmap_mappings(struct spu_context *ctx) if (ctx->local_store) unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1); if (ctx->mfc) - unmap_mapping_range(ctx->mfc, 0, 0x4000, 1); + unmap_mapping_range(ctx->mfc, 0, 0x1000, 1); if (ctx->cntl) - unmap_mapping_range(ctx->cntl, 0, 0x4000, 1); + unmap_mapping_range(ctx->cntl, 0, 0x1000, 1); if (ctx->signal1) - unmap_mapping_range(ctx->signal1, 0, 0x4000, 1); + unmap_mapping_range(ctx->signal1, 0, PAGE_SIZE, 1); if (ctx->signal2) - unmap_mapping_range(ctx->signal2, 0, 0x4000, 1); + unmap_mapping_range(ctx->signal2, 0, PAGE_SIZE, 1); + if (ctx->mss) + unmap_mapping_range(ctx->mss, 0, 0x1000, 1); + if (ctx->psmap) + unmap_mapping_range(ctx->psmap, 0, 0x20000, 1); } int spu_acquire_exclusive(struct spu_context *ctx) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 7fb9a6dc4f18..a528020baa18 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -45,8 +45,8 @@ spufs_mem_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->local_store = inode->i_mapping; + smp_wmb(); return 0; } @@ -232,8 +232,8 @@ static int spufs_cntl_open(struct inode *inode, struct file *file) struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->cntl = inode->i_mapping; + smp_wmb(); return simple_attr_open(inode, file, spufs_cntl_get, spufs_cntl_set, "0x%08lx"); } @@ -717,8 +717,8 @@ static int spufs_signal1_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->signal1 = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -824,8 +824,8 @@ static int spufs_signal2_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->signal2 = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1021,8 +1021,11 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma) static int spufs_mss_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; file->private_data = i->i_ctx; + ctx->mss = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1060,8 +1063,11 @@ static int spufs_psmap_mmap(struct file *file, struct vm_area_struct *vma) static int spufs_psmap_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; file->private_data = i->i_ctx; + ctx->psmap = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1114,6 +1120,8 @@ static int spufs_mfc_open(struct inode *inode, struct file *file) return -EBUSY; file->private_data = ctx; + ctx->mfc = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 56864469215e..0941c56df9b5 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -51,6 +51,8 @@ struct spu_context { struct address_space *cntl; /* 'control' area mappings. */ struct address_space *signal1; /* 'signal1' area mappings. */ struct address_space *signal2; /* 'signal2' area mappings. */ + struct address_space *mss; /* 'mss' area mappings. */ + struct address_space *psmap; /* 'psmap' area mappings. */ u64 object_id; /* user space pointer for oprofile */ enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state; -- cgit v1.2.2 From c2882bb12cbd8a4170e673e6a33c6be047b75bc1 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 9 Feb 2007 17:28:31 -0600 Subject: [POWERPC] 85xx: Add support for the 8568 MDS board Add support for the MPC8568 MDS reference board Signed-off-by: Andrew Fleming Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8568mds.dts | 380 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/85xx/Kconfig | 13 + arch/powerpc/platforms/85xx/Makefile | 1 + arch/powerpc/platforms/85xx/mpc8568_mds.c | 246 +++++++++++++++++++ 4 files changed, 640 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8568mds.dts create mode 100644 arch/powerpc/platforms/85xx/mpc8568_mds.c diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts new file mode 100644 index 000000000000..06d24653e422 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -0,0 +1,380 @@ +/* + * MPC8568E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/* +/memreserve/ 00000000 1000000; +*/ + +/ { + model = "MPC8568EMDS"; + compatible = "MPC85xxMDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8568@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 10000000>; + }; + + bcsr@f8000000 { + device_type = "board-control"; + reg = ; + }; + + soc8568@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + mac-address = [ 00 00 00 00 00 00 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452002>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + mac-address = [ 00 00 00 00 00 00]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452003>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 f000>; + interrupts = <1d 2>; + interrupt-parent = <40000>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <000000fe>; + descriptor-types-mask = <012b0ebf>; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + par_io@e0100 { + reg = ; + device_type = "par_io"; + num-ports = <7>; + + ucc_pin@01 { + linux,phandle = ; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 4 0a 1 0 2 0 /* TxD0 */ + 4 09 1 0 2 0 /* TxD1 */ + 4 08 1 0 2 0 /* TxD2 */ + 4 07 1 0 2 0 /* TxD3 */ + 4 17 1 0 2 0 /* TxD4 */ + 4 16 1 0 2 0 /* TxD5 */ + 4 15 1 0 2 0 /* TxD6 */ + 4 14 1 0 2 0 /* TxD7 */ + 4 0f 2 0 2 0 /* RxD0 */ + 4 0e 2 0 2 0 /* RxD1 */ + 4 0d 2 0 2 0 /* RxD2 */ + 4 0c 2 0 2 0 /* RxD3 */ + 4 1d 2 0 2 0 /* RxD4 */ + 4 1c 2 0 2 0 /* RxD5 */ + 4 1b 2 0 2 0 /* RxD6 */ + 4 1a 2 0 2 0 /* RxD7 */ + 4 0b 1 0 2 0 /* TX_EN */ + 4 18 1 0 2 0 /* TX_ER */ + 4 0f 2 0 2 0 /* RX_DV */ + 4 1e 2 0 2 0 /* RX_ER */ + 4 11 2 0 2 0 /* RX_CLK */ + 4 13 1 0 2 0 /* GTX_CLK */ + 1 1f 2 0 3 0>; /* GTX125 */ + }; + ucc_pin@02 { + linux,phandle = ; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 5 0a 1 0 2 0 /* TxD0 */ + 5 09 1 0 2 0 /* TxD1 */ + 5 08 1 0 2 0 /* TxD2 */ + 5 07 1 0 2 0 /* TxD3 */ + 5 17 1 0 2 0 /* TxD4 */ + 5 16 1 0 2 0 /* TxD5 */ + 5 15 1 0 2 0 /* TxD6 */ + 5 14 1 0 2 0 /* TxD7 */ + 5 0f 2 0 2 0 /* RxD0 */ + 5 0e 2 0 2 0 /* RxD1 */ + 5 0d 2 0 2 0 /* RxD2 */ + 5 0c 2 0 2 0 /* RxD3 */ + 5 1d 2 0 2 0 /* RxD4 */ + 5 1c 2 0 2 0 /* RxD5 */ + 5 1b 2 0 2 0 /* RxD6 */ + 5 1a 2 0 2 0 /* RxD7 */ + 5 0b 1 0 2 0 /* TX_EN */ + 5 18 1 0 2 0 /* TX_ER */ + 5 10 2 0 2 0 /* RX_DV */ + 5 1e 2 0 2 0 /* RX_ER */ + 5 11 2 0 2 0 /* RX_CLK */ + 5 13 1 0 2 0 /* GTX_CLK */ + 1 1f 2 0 3 0 /* GTX125 */ + 4 06 3 0 2 0 /* MDIO */ + 4 05 1 0 2 0>; /* MDC */ + }; + }; + }; + + qe@e0080000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + model = "QE"; + ranges = <0 e0080000 00040000>; + reg = ; + brg-frequency = <0>; + bus-frequency = <179A7B00>; + + muram@10000 { + device_type = "muram"; + ranges = <0 00010000 0000c000>; + + data-only@0{ + reg = <0 c000>; + }; + }; + + spi@4c0 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <4c0 40>; + interrupts = <2>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + spi@500 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <500 40>; + interrupts = <1>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <1>; + reg = <2000 200>; + interrupts = <20>; + interrupt-parent = <80>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = <0>; + tx-clock = <19>; + phy-handle = <212000>; + pio-handle = ; + }; + + ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <2>; + reg = <3000 200>; + interrupts = <21>; + interrupt-parent = <80>; + mac-address = [ 00 11 22 33 44 55 ]; + rx-clock = <0>; + tx-clock = <14>; + phy-handle = <212001>; + pio-handle = ; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2120 18>; + device_type = "mdio"; + compatible = "ucc_geth_phy"; + + /* These are the same PHYs as on + * gianfar's MDIO bus */ + ethernet-phy@00 { + linux,phandle = <212000>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <0>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + ethernet-phy@01 { + linux,phandle = <212001>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <1>; + device_type = "ethernet-phy"; + interface = <6>; + }; + ethernet-phy@02 { + linux,phandle = <212002>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <2>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + ethernet-phy@03 { + linux,phandle = <212003>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <3>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + }; + + qeic@80 { + linux,phandle = <80>; + interrupt-controller; + device_type = "qeic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <80 80>; + built-in; + big-endian; + interrupts = <1e 2 1e 2>; //high:30 low:30 + interrupt-parent = <40000>; + }; + + }; +}; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 0584f3c7e884..0efdd2f1babe 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -23,6 +23,13 @@ config MPC85xx_CDS help This option enables support for the MPC85xx CDS board +config MPC8568_MDS + bool "Freescale MPC8568 MDS" + select DEFAULT_UIMAGE +# select QUICC_ENGINE + help + This option enables support for the MPC8568 MDS board + endchoice config MPC8540 @@ -36,6 +43,12 @@ config MPC8560 select PPC_INDIRECT_PCI default y if MPC8560_ADS +config MPC85xx + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS + config PPC_INDIRECT_PCI_BE bool depends on PPC_85xx diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 282f5d0d0152..e40e521816b8 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o +obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o diff --git a/arch/powerpc/platforms/85xx/mpc8568_mds.c b/arch/powerpc/platforms/85xx/mpc8568_mds.c new file mode 100644 index 000000000000..0861d1107bc8 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc8568_mds.c @@ -0,0 +1,246 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved. + * + * Author: Andy Fleming + * + * Based on 83xx/mpc8360e_pb.c by: + * Li Yang + * Yin Olivia + * + * Description: + * MPC8568E MDS PB board specific routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mpc85xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8568_mds_setup_arch(void) +{ + struct device_node *np; + static u8 *bcsr_regs = NULL; + + + if (ppc_md.progress) + ppc_md.progress("mpc8568_mds_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != NULL) { + const unsigned int *fp = + get_property(np, "clock-frequency", NULL); + if (fp != NULL) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != NULL) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start +1); + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) { + add_bridge(np); + } + of_node_put(np); +#endif + +#ifdef CONFIG_QUICC_ENGINE + if ((np = of_find_node_by_name(NULL, "qe")) != NULL) { + qe_reset(); + of_node_put(np); + } + + if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { + struct device_node *ucc = NULL; + + par_io_init(np); + of_node_put(np); + + for ( ;(ucc = of_find_node_by_name(ucc, "ucc")) != NULL;) + par_io_of_config(ucc); + + of_node_put(ucc); + } + + if (bcsr_regs) { + u8 bcsr_phy; + + /* Reset the Ethernet PHY */ + bcsr_phy = in_be8(&bcsr_regs[9]); + bcsr_phy &= ~0x20; + out_be8(&bcsr_regs[9], bcsr_phy); + + udelay(1000); + + bcsr_phy = in_be8(&bcsr_regs[9]); + bcsr_phy |= 0x20; + out_be8(&bcsr_regs[9], bcsr_phy); + + iounmap(bcsr_regs); + } + +#endif /* CONFIG_QUICC_ENGINE */ +} + +static struct of_device_id mpc8568_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "qe", }, + {}, +}; + +static int __init mpc8568_publish_devices(void) +{ + if (!machine_is(mpc8568_mds)) + return 0; + + /* Publish the QE devices */ + of_platform_bus_probe(NULL,mpc8568_ids,NULL); + + return 0; +} +device_initcall(mpc8568_publish_devices); + +static void __init mpc8568_mds_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) + return; + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + /* Internal Interrupts */ + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); + + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + + qe_ic_init(np, 0); + of_node_put(np); +#endif /* CONFIG_QUICC_ENGINE */ +} + + +static int __init mpc8568_mds_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8568EMDS")) + return 0; + + DBG("MPC8568EMDS found\n"); + + return 1; +} + + +define_machine(mpc8568_mds) { + .name = "MPC8568E MDS", + .probe = mpc8568_mds_probe, + .setup_arch = mpc8568_mds_setup_arch, + .init_IRQ = mpc8568_mds_pic_init, + .get_irq = mpic_get_irq, + .restart = mpc85xx_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; -- cgit v1.2.2 From eb11a720a85833bbd9b92628f196583ee1d50d4e Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 9 Feb 2007 17:30:09 -0600 Subject: [POWERPC] 85xx: Add a defconfig for the 8568 MDS Add defconfig for the MPC8568 MDS reference board Signed-off-by: Andrew Fleming Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc8568mds_defconfig | 992 ++++++++++++++++++++++++++++++ 1 file changed, 992 insertions(+) create mode 100644 arch/powerpc/configs/mpc8568mds_defconfig diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig new file mode 100644 index 000000000000..058e06d88bc1 --- /dev/null +++ b/arch/powerpc/configs/mpc8568mds_defconfig @@ -0,0 +1,992 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20-rc5 +# Wed Feb 7 23:54:25 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_MPC85xx_CDS is not set +CONFIG_MPC8568_MDS=y +CONFIG_MPC85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y +CONFIG_MPIC=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y + +# +# Ethernet (1000 Mbit) +# +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_BOOKE_WDT is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUGGER=y +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set +CONFIG_BOOTX_TEXT=y +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v1.2.2 From 8c4a013da84e69e4d736363921792e1b37525577 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 9 Feb 2007 14:00:36 -0600 Subject: [POWERPC] 83xx: Add support for MPC8349E-mITX-GP This patch adds a defconfig and a DTS for the MPC8349E-mITX-GP, a variant of the MPC8349E-mITX. USB is disabled because the only USB port is not setup properly by firmware/kernel Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitxgp.dts | 187 ++++ arch/powerpc/configs/mpc834x_itxgp_defconfig | 1174 ++++++++++++++++++++++++++ 2 files changed, 1361 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8349emitxgp.dts create mode 100644 arch/powerpc/configs/mpc834x_itxgp_defconfig diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts new file mode 100644 index 000000000000..3190774de1d8 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -0,0 +1,187 @@ +/* + * MPC8349E-mITX-GP Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/ { + model = "MPC8349EMITXGP"; + compatible = "MPC834xMITXGP"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; + i-cache-line-size = <20>; + d-cache-size = <8000>; + i-cache-size = <8000>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; // from bootloader + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + + /* Vitesse 8201 */ + ethernet-phy@1c { + linux,phandle = <245201c>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <1c>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8 21 8 22 8>; + interrupt-parent = <700>; + phy-handle = <245201c>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; // from bootloader + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; // from bootloader + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8600 { + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x0F - PCI Slot */ + 7800 0 0 1 700 14 8 /* PCI_INTA */ + 7800 0 0 2 700 15 8 /* PCI_INTB */ + >; + interrupt-parent = <700>; + interrupts = <43 8>; + bus-range = <1 1>; + ranges = <42000000 0 a0000000 a0000000 0 10000000 + 02000000 0 b0000000 b0000000 0 10000000 + 01000000 0 00000000 e3000000 0 01000000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8600 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = ; + interrupt-parent = <700>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; + descriptor-types-mask = <01010ebf>; + }; + + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/configs/mpc834x_itxgp_defconfig b/arch/powerpc/configs/mpc834x_itxgp_defconfig new file mode 100644 index 000000000000..4aa666c9cb94 --- /dev/null +++ b/arch/powerpc/configs/mpc834x_itxgp_defconfig @@ -0,0 +1,1174 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Fri Feb 9 13:28:19 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC834x_SYS is not set +CONFIG_MPC834x_ITX=y +# CONFIG_MPC8360E_PB is not set +CONFIG_MPC834x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xfe000000 +CONFIG_MTD_PHYSMAP_LEN=0x800000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +CONFIG_SENSORS_PCF8574=y +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MPC83xx=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=y + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# -- cgit v1.2.2 From a20d0ce694e56f94857eacdc8534357d798460fd Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 9 Feb 2007 10:01:50 -0600 Subject: [POWERPC] 83xx: Updated mpc834x_itx_defconfig This patch updates the defconfig for the MPC8349E-mITX. In addition to picking up changes from recent kernels, disables support for e100 (which doesn't ship with the system), turns off input devices, turns on some I2C support, turns off HW monitoring (HW not yet supported), turns off OHCI USB (not used), turns off USB gadget support (HW not yet supported), turns on DOS FS support, and turns off kernel debugging. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc834x_itx_defconfig | 232 ++++++++--------------------- 1 file changed, 60 insertions(+), 172 deletions(-) diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig index 7902806429f8..23d8964846e0 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:02 2007 +# Linux kernel version: 2.6.20 +# Wed Feb 7 13:12:18 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_83xx=y @@ -178,7 +178,6 @@ CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -303,7 +302,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -523,6 +521,7 @@ CONFIG_SCSI_SPI_ATTRS=y # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -647,37 +646,7 @@ CONFIG_CICADA_PHY=y # # Ethernet (10 or 100Mbit) # -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set +# CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) @@ -693,7 +662,6 @@ CONFIG_E100=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y @@ -746,26 +714,7 @@ CONFIG_GFAR_NAPI=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -784,7 +733,7 @@ CONFIG_INPUT=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -887,7 +836,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set +CONFIG_SENSORS_PCF8574=y # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_M41T00 is not set @@ -901,7 +850,6 @@ CONFIG_I2C_MPC=y # SPI support # CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # @@ -922,52 +870,8 @@ CONFIG_SPI_MPC83xx=y # # Hardware Monitoring support # -CONFIG_HWMON=y +# CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices @@ -983,7 +887,7 @@ CONFIG_HWMON=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -993,11 +897,6 @@ CONFIG_FIRMWARE_EDID=y # # CONFIG_SOUND is not set -# -# HID Devices -# -CONFIG_HID=y - # # USB support # @@ -1023,10 +922,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # @@ -1058,25 +955,10 @@ CONFIG_USB_STORAGE=y # # USB Input Devices # -# CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -1133,25 +1015,7 @@ CONFIG_USB_MON=y # # USB Gadget Support # -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -CONFIG_USB_GADGET_NET2280=y -CONFIG_USB_NET2280=y -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -CONFIG_USB_GADGET_DUALSPEED=y -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_GADGET is not set # # MMC/SD Card support @@ -1273,8 +1137,11 @@ CONFIG_DNOTIFY=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1340,7 +1207,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set @@ -1356,7 +1223,46 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # # Distributed Lock Manager @@ -1388,27 +1294,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_DEBUGGER is not set -# CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_SERIAL_TEXT_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set -- cgit v1.2.2 From 552ce544edfbe9bce79952a8c0f8d65b7f2d16bb Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 13 Feb 2007 12:08:18 -0800 Subject: Revert "[PATCH] Fix d_path for lazy unmounts" This reverts commit eb3dfb0cb1f4a44e2d0553f89514ce9f2a9fcaf1. It causes some strange Gnome problem with dbus-daemon getting stuck, so we'll revert it until that problem is understood. Reported by both walt and Greg KH, who both independently git-bisected the problem to this commit. Andreas is looking at it. Reported-by: walt Reported-by: Greg KH Acked-by: Andreas Gruenbacher Signed-off-by: Linus Torvalds --- fs/dcache.c | 150 ++++++++++++++++++++++++++++-------------------------------- 1 file changed, 70 insertions(+), 80 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index b5f613932912..d68631f18df1 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1739,41 +1739,45 @@ shouldnt_be_hashed: * @rootmnt: vfsmnt to which the root dentry belongs * @buffer: buffer to return value in * @buflen: buffer length - * @fail_deleted: what to return for deleted files * - * Convert a dentry into an ASCII path name. If the entry has been deleted, - * then if @fail_deleted is true, ERR_PTR(-ENOENT) is returned. Otherwise, - * the the string " (deleted)" is appended. Note that this is ambiguous. + * Convert a dentry into an ASCII path name. If the entry has been deleted + * the string " (deleted)" is appended. Note that this is ambiguous. * - * Returns the buffer or an error code. + * Returns the buffer or an error code if the path was too long. + * + * "buflen" should be positive. Caller holds the dcache_lock. */ -static char *__d_path(struct dentry *dentry, struct vfsmount *vfsmnt, - struct dentry *root, struct vfsmount *rootmnt, - char *buffer, int buflen, int fail_deleted) +static char * __d_path( struct dentry *dentry, struct vfsmount *vfsmnt, + struct dentry *root, struct vfsmount *rootmnt, + char *buffer, int buflen) { - int namelen, is_slash; - - if (buflen < 2) - return ERR_PTR(-ENAMETOOLONG); - buffer += --buflen; - *buffer = '\0'; + char * end = buffer+buflen; + char * retval; + int namelen; - spin_lock(&dcache_lock); + *--end = '\0'; + buflen--; if (!IS_ROOT(dentry) && d_unhashed(dentry)) { - if (fail_deleted) { - buffer = ERR_PTR(-ENOENT); - goto out; - } - if (buflen < 10) - goto Elong; buflen -= 10; - buffer -= 10; - memcpy(buffer, " (deleted)", 10); + end -= 10; + if (buflen < 0) + goto Elong; + memcpy(end, " (deleted)", 10); } - while (dentry != root || vfsmnt != rootmnt) { + + if (buflen < 1) + goto Elong; + /* Get '/' right */ + retval = end-1; + *retval = '/'; + + for (;;) { struct dentry * parent; + if (dentry == root && vfsmnt == rootmnt) + break; if (dentry == vfsmnt->mnt_root || IS_ROOT(dentry)) { + /* Global root? */ spin_lock(&vfsmount_lock); if (vfsmnt->mnt_parent == vfsmnt) { spin_unlock(&vfsmount_lock); @@ -1787,60 +1791,33 @@ static char *__d_path(struct dentry *dentry, struct vfsmount *vfsmnt, parent = dentry->d_parent; prefetch(parent); namelen = dentry->d_name.len; - if (buflen <= namelen) - goto Elong; buflen -= namelen + 1; - buffer -= namelen; - memcpy(buffer, dentry->d_name.name, namelen); - *--buffer = '/'; + if (buflen < 0) + goto Elong; + end -= namelen; + memcpy(end, dentry->d_name.name, namelen); + *--end = '/'; + retval = end; dentry = parent; } - /* Get '/' right */ - if (*buffer != '/') - *--buffer = '/'; -out: - spin_unlock(&dcache_lock); - return buffer; + return retval; global_root: - /* - * We went past the (vfsmount, dentry) we were looking for and have - * either hit a root dentry, a lazily unmounted dentry, an - * unconnected dentry, or the file is on a pseudo filesystem. - */ namelen = dentry->d_name.len; - is_slash = (namelen == 1 && *dentry->d_name.name == '/'); - if (is_slash || (dentry->d_sb->s_flags & MS_NOUSER)) { - /* - * Make sure we won't return a pathname starting with '/'. - * - * Historically, we also glue together the root dentry and - * remaining name for pseudo filesystems like pipefs, which - * have the MS_NOUSER flag set. This results in pathnames - * like "pipe:[439336]". - */ - if (*buffer == '/') { - buffer++; - buflen++; - } - if (is_slash) - goto out; - } - if (buflen < namelen) + buflen -= namelen; + if (buflen < 0) goto Elong; - buffer -= namelen; - memcpy(buffer, dentry->d_name.name, namelen); - goto out; - + retval -= namelen-1; /* hit the slash */ + memcpy(retval, dentry->d_name.name, namelen); + return retval; Elong: - buffer = ERR_PTR(-ENAMETOOLONG); - goto out; + return ERR_PTR(-ENAMETOOLONG); } /* write full pathname into buffer and return start of pathname */ -char *d_path(struct dentry *dentry, struct vfsmount *vfsmnt, char *buf, - int buflen) +char * d_path(struct dentry *dentry, struct vfsmount *vfsmnt, + char *buf, int buflen) { char *res; struct vfsmount *rootmnt; @@ -1850,7 +1827,9 @@ char *d_path(struct dentry *dentry, struct vfsmount *vfsmnt, char *buf, rootmnt = mntget(current->fs->rootmnt); root = dget(current->fs->root); read_unlock(¤t->fs->lock); - res = __d_path(dentry, vfsmnt, root, rootmnt, buf, buflen, 0); + spin_lock(&dcache_lock); + res = __d_path(dentry, vfsmnt, root, rootmnt, buf, buflen); + spin_unlock(&dcache_lock); dput(root); mntput(rootmnt); return res; @@ -1876,10 +1855,10 @@ char *d_path(struct dentry *dentry, struct vfsmount *vfsmnt, char *buf, */ asmlinkage long sys_getcwd(char __user *buf, unsigned long size) { - int error, len; + int error; struct vfsmount *pwdmnt, *rootmnt; struct dentry *pwd, *root; - char *page = (char *) __get_free_page(GFP_USER), *cwd; + char *page = (char *) __get_free_page(GFP_USER); if (!page) return -ENOMEM; @@ -1891,18 +1870,29 @@ asmlinkage long sys_getcwd(char __user *buf, unsigned long size) root = dget(current->fs->root); read_unlock(¤t->fs->lock); - cwd = __d_path(pwd, pwdmnt, root, rootmnt, page, PAGE_SIZE, 1); - error = PTR_ERR(cwd); - if (IS_ERR(cwd)) - goto out; + error = -ENOENT; + /* Has the current directory has been unlinked? */ + spin_lock(&dcache_lock); + if (pwd->d_parent == pwd || !d_unhashed(pwd)) { + unsigned long len; + char * cwd; - error = -ERANGE; - len = PAGE_SIZE + page - cwd; - if (len <= size) { - error = len; - if (copy_to_user(buf, cwd, len)) - error = -EFAULT; - } + cwd = __d_path(pwd, pwdmnt, root, rootmnt, page, PAGE_SIZE); + spin_unlock(&dcache_lock); + + error = PTR_ERR(cwd); + if (IS_ERR(cwd)) + goto out; + + error = -ERANGE; + len = PAGE_SIZE + page - cwd; + if (len <= size) { + error = len; + if (copy_to_user(buf, cwd, len)) + error = -EFAULT; + } + } else + spin_unlock(&dcache_lock); out: dput(pwd); -- cgit v1.2.2 From 436f137975507b0baab0859a253c3c9332c22f62 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:16:45 -0800 Subject: [TG3]: Save MSI state before suspend. This fixes the following problem: http://bugzilla.kernel.org/show_bug.cgi?id=7969 The MSI state needs to be saved during suspend. PCI state saved during tg3_init_one() does not contain valid MSI state because MSI hasn't been enabled. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index e136bae61970..0b5b8e7f55ac 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -12016,6 +12016,9 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; tg3_full_unlock(tp); + /* Save MSI address and data for resume. */ + pci_save_state(pdev); + err = tg3_set_power_state(tp, pci_choose_state(pdev, state)); if (err) { tg3_full_lock(tp, 0); -- cgit v1.2.2 From 49afdeb65bb917e22cf9116bc31380befe9db890 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:17:03 -0800 Subject: [TG3]: Use lower DMA watermark for 5703. Set DMA read watermark to 4 on 5703 in PCIX mode. This is needed to prevent some tx timeouts. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 0b5b8e7f55ac..2df343f48207 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -11314,6 +11314,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp) if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f); + u32 read_water = 0x7; /* If the 5704 is behind the EPB bridge, we can * do the less restrictive ONE_DMA workaround for @@ -11325,8 +11326,13 @@ static int __devinit tg3_test_dma(struct tg3 *tp) else if (ccval == 0x6 || ccval == 0x7) tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) + read_water = 4; /* Set bit 23 to enable PCIX hw bug fix */ - tp->dma_rwctrl |= 0x009f0000; + tp->dma_rwctrl |= + (read_water << DMA_RWCTRL_READ_WATER_SHIFT) | + (0x3 << DMA_RWCTRL_WRITE_WATER_SHIFT) | + (1 << 23); } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) { /* 5780 always in PCIX mode */ tp->dma_rwctrl |= 0x00144000; -- cgit v1.2.2 From d4011adaf8b5ea555357a40388ee9aa7ed2daf9f Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:17:25 -0800 Subject: [TG3]: 5722/5756 don't need PHY jitter workaround. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 2df343f48207..fc94b19d1e28 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -10779,7 +10779,9 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) { if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) { - tp->tg3_flags2 |= TG3_FLG2_PHY_JITTER_BUG; + if (tp->pdev->device != PCI_DEVICE_ID_TIGON3_5756 && + tp->pdev->device != PCI_DEVICE_ID_TIGON3_5722) + tp->tg3_flags2 |= TG3_FLG2_PHY_JITTER_BUG; if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5755M) tp->tg3_flags2 |= TG3_FLG2_PHY_ADJUST_TRIM; } else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) -- cgit v1.2.2 From d7b0a8573c9ac8923bf6f205f4ce60dd2ac811d5 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:17:38 -0800 Subject: [TG3]: 5906 doesn't need to switch to slower clock. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index fc94b19d1e28..b6615f112eaa 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1340,7 +1340,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) tw32_wait_f(TG3PCI_CLOCK_CTRL, base_val | CLOCK_CTRL_ALTCLK | CLOCK_CTRL_PWRDOWN_PLL133, 40); - } else if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { + } else if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) || + (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)) { /* do nothing */ } else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) && (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) { -- cgit v1.2.2 From 5129724aa5de3a71fc70e71ca49d542ca1a5aa1e Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:17:57 -0800 Subject: [TG3]: Power down 5704 serdes transceiver when shutting down. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index b6615f112eaa..604f3085d12a 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1175,8 +1175,18 @@ static void tg3_nvram_unlock(struct tg3 *); static void tg3_power_down_phy(struct tg3 *tp) { - if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) + if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) { + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { + u32 sg_dig_ctrl = tr32(SG_DIG_CTRL); + u32 serdes_cfg = tr32(MAC_SERDES_CFG); + + sg_dig_ctrl |= + SG_DIG_USING_HW_AUTONEG | SG_DIG_SOFT_RESET; + tw32(SG_DIG_CTRL, sg_dig_ctrl); + tw32(MAC_SERDES_CFG, serdes_cfg | (1 << 15)); + } return; + } if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { u32 val; -- cgit v1.2.2 From 569a5df8597deeaa39867be73c7305fd82522f57 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:18:15 -0800 Subject: [TG3]: Use constant for PHY register 0x1e. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 10 ++++++---- drivers/net/tg3.h | 1 + 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 604f3085d12a..a1aeba2442f5 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -6594,8 +6594,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) u32 tmp; /* Clear CRC stats. */ - if (!tg3_readphy(tp, 0x1e, &tmp)) { - tg3_writephy(tp, 0x1e, tmp | 0x8000); + if (!tg3_readphy(tp, MII_TG3_TEST1, &tmp)) { + tg3_writephy(tp, MII_TG3_TEST1, + tmp | MII_TG3_TEST1_CRC_EN); tg3_readphy(tp, 0x14, &tmp); } } @@ -7419,8 +7420,9 @@ static unsigned long calc_crc_errors(struct tg3 *tp) u32 val; spin_lock_bh(&tp->lock); - if (!tg3_readphy(tp, 0x1e, &val)) { - tg3_writephy(tp, 0x1e, val | 0x8000); + if (!tg3_readphy(tp, MII_TG3_TEST1, &val)) { + tg3_writephy(tp, MII_TG3_TEST1, + val | MII_TG3_TEST1_CRC_EN); tg3_readphy(tp, 0x14, &val); } else val = 0; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 80f59ac7ec58..45d477e8f374 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -1660,6 +1660,7 @@ #define MII_TG3_TEST1 0x1e #define MII_TG3_TEST1_TRIM_EN 0x0010 +#define MII_TG3_TEST1_CRC_EN 0x8000 /* There are two ways to manage the TX descriptors on the tigon3. * Either the descriptors are in host DMA'able memory, or they -- cgit v1.2.2 From b0408751128edc126eb37798d51891d8d0a41dc6 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:18:30 -0800 Subject: [TG3]: Add some tx timeout debug messages. Print the most useful information during tx timeout to help debug. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index a1aeba2442f5..159570b12c38 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3735,13 +3735,23 @@ out: tg3_full_unlock(tp); } +static void tg3_dump_short_state(struct tg3 *tp) +{ + printk(KERN_ERR PFX "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n", + tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS)); + printk(KERN_ERR PFX "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n", + tr32(RDMAC_STATUS), tr32(WDMAC_STATUS)); +} + static void tg3_tx_timeout(struct net_device *dev) { struct tg3 *tp = netdev_priv(dev); - if (netif_msg_tx_err(tp)) + if (netif_msg_tx_err(tp)) { printk(KERN_ERR PFX "%s: transmit timed out, resetting\n", dev->name); + tg3_dump_short_state(tp); + } schedule_work(&tp->reset_task); } -- cgit v1.2.2 From 65610fbab35b0570df4a9d0e77e111f85606b312 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 13 Feb 2007 12:18:46 -0800 Subject: [TG3]: Update copyright, version, and reldate. Update version to 3.73. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 159570b12c38..81a1c2e1a3f5 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -4,7 +4,7 @@ * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com) * Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com) * Copyright (C) 2004 Sun Microsystems Inc. - * Copyright (C) 2005 Broadcom Corporation. + * Copyright (C) 2005-2007 Broadcom Corporation. * * Firmware is: * Derived from proprietary unpublished source code, @@ -64,8 +64,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.72" -#define DRV_MODULE_RELDATE "January 8, 2007" +#define DRV_MODULE_VERSION "3.73" +#define DRV_MODULE_RELDATE "February 12, 2007" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v1.2.2 From bbf4a6bc8c4d59a0a9033fc2cb96ec03430c96e4 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 13 Feb 2007 12:32:58 -0800 Subject: [NETFILTER]: Clear GSO bits for TCP reset packet The TCP reset packet is copied from the original. This includes all the GSO bits which do not apply to the new packet. So we should clear those bits. Spotted by Patrick McHardy. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/netfilter/ipt_REJECT.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv4/netfilter/ipt_REJECT.c b/net/ipv4/netfilter/ipt_REJECT.c index a9eb3635fff2..80f739e21824 100644 --- a/net/ipv4/netfilter/ipt_REJECT.c +++ b/net/ipv4/netfilter/ipt_REJECT.c @@ -80,6 +80,10 @@ static void send_reset(struct sk_buff *oldskb, int hook) nskb->mark = 0; skb_init_secmark(nskb); + skb_shinfo(nskb)->gso_size = 0; + skb_shinfo(nskb)->gso_segs = 0; + skb_shinfo(nskb)->gso_type = 0; + tcph = (struct tcphdr *)((u_int32_t*)nskb->nh.iph + nskb->nh.iph->ihl); /* Swap source and dest */ -- cgit v1.2.2 From a10d567c89dfba90dde2e0515e25760fd74cde06 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Tue, 13 Feb 2007 12:35:26 -0800 Subject: [BRIDGE] br_if: Fix oops in port_carrier_check Signed-off-by: Jarek Poplawski Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_if.c | 8 ++++++-- net/bridge/br_notify.c | 4 +++- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index f35c1a378d0f..aff6a779c9c8 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -108,6 +108,7 @@ static void port_carrier_check(struct work_struct *work) spin_unlock_bh(&br->lock); } done: + dev_put(dev); rtnl_unlock(); } @@ -161,7 +162,8 @@ static void del_nbp(struct net_bridge_port *p) dev_set_promiscuity(dev, -1); - cancel_delayed_work(&p->carrier_check); + if (cancel_delayed_work(&p->carrier_check)) + dev_put(dev); spin_lock_bh(&br->lock); br_stp_disable_port(p); @@ -444,7 +446,9 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) spin_lock_bh(&br->lock); br_stp_recalculate_bridge_id(br); br_features_recompute(br); - schedule_delayed_work(&p->carrier_check, BR_PORT_DEBOUNCE); + if (schedule_delayed_work(&p->carrier_check, BR_PORT_DEBOUNCE)) + dev_hold(dev); + spin_unlock_bh(&br->lock); dev_set_mtu(br->dev, br_min_mtu(br)); diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c index 8cd3e4229070..3311c4e30829 100644 --- a/net/bridge/br_notify.c +++ b/net/bridge/br_notify.c @@ -56,7 +56,9 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v case NETDEV_CHANGE: if (br->dev->flags & IFF_UP) - schedule_delayed_work(&p->carrier_check, BR_PORT_DEBOUNCE); + if (schedule_delayed_work(&p->carrier_check, + BR_PORT_DEBOUNCE)) + dev_hold(dev); break; case NETDEV_FEAT_CHANGE: -- cgit v1.2.2 From 3d50f23108ff01457d1ca6fb2b5f2da8214e83e4 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 13 Feb 2007 12:36:57 -0800 Subject: [NET_SCHED]: sch_hfsc: replace ASSERT macro by WARN_ON Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/sched/sch_hfsc.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 135087d4213a..396deb71480f 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -71,8 +71,6 @@ #include #include -#define HFSC_DEBUG 1 - /* * kernel internal service curve representation: * coordinates are given by 64 bit unsigned integers. @@ -211,17 +209,6 @@ do { \ } while (0) #endif -#if HFSC_DEBUG -#define ASSERT(cond) \ -do { \ - if (unlikely(!(cond))) \ - printk("assertion %s failed at %s:%i (%s)\n", \ - #cond, __FILE__, __LINE__, __FUNCTION__); \ -} while (0) -#else -#define ASSERT(cond) -#endif /* HFSC_DEBUG */ - #define HT_INFINITY 0xffffffffffffffffULL /* infinite time value */ @@ -1492,7 +1479,7 @@ hfsc_schedule_watchdog(struct Qdisc *sch, u64 cur_time) if (next_time == 0 || next_time > q->root.cl_cfmin) next_time = q->root.cl_cfmin; } - ASSERT(next_time != 0); + WARN_ON(next_time == 0); delay = next_time - cur_time; delay = PSCHED_US2JIFFIE(delay); -- cgit v1.2.2 From 600ff0c24bb71482e7f0da948a931d5c5d72838a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Tue, 13 Feb 2007 12:42:11 -0800 Subject: [TCP]: Prevent pseudo garbage in SYN's advertized window MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit TCP may advertize up to 16-bits window in SYN packets (no window scaling allowed). At the same time, TCP may have rcv_wnd (32-bits) that does not fit to 16-bits without window scaling resulting in pseudo garbage into advertized window from the low-order bits of rcv_wnd. This can happen at least when mss <= (1< Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index cebe9aa918a3..dc151139b5af 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -481,7 +481,7 @@ static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it, /* RFC1323: The window in SYN & SYN/ACK segments * is never scaled. */ - th->window = htons(tp->rcv_wnd); + th->window = htons(min(tp->rcv_wnd, 65535U)); } else { th->window = htons(tcp_select_window(sk)); } @@ -2160,7 +2160,7 @@ struct sk_buff * tcp_make_synack(struct sock *sk, struct dst_entry *dst, } /* RFC1323: The window in SYN & SYN/ACK segments is never scaled. */ - th->window = htons(req->rcv_wnd); + th->window = htons(min(req->rcv_wnd, 65535U)); TCP_SKB_CB(skb)->when = tcp_time_stamp; tcp_syn_build_options((__be32 *)(th + 1), dst_metric(dst, RTAX_ADVMSS), ireq->tstamp_ok, -- cgit v1.2.2 From 30a6c337dcefa7583fe9289fedb28783af980c0c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:45 +0100 Subject: [POWERPC] spufs: remove SPU_CONTEXT_PREEMPT Remove the SPU_CONTEXT_PREEMPT define. It's unused and won't be used in this form after the scheduler rework. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/spufs.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 0941c56df9b5..9b44abe921cc 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -37,9 +37,6 @@ enum { }; struct spu_context_ops; - -#define SPU_CONTEXT_PREEMPT 0UL - struct spu_gang; struct spu_context { -- cgit v1.2.2 From 5cb23afc9e64841adb43d46160a5c63a80ebfd54 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:46 +0100 Subject: [POWERPC] spufs: remove empty last line in run.c Remove the empty last line in arch/powerpc/platforms/cell/spufs/run.c. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/run.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 1acc2ffef8c8..51b78da2f0d3 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -361,4 +361,3 @@ out: up(&ctx->run_sema); return ret; } - -- cgit v1.2.2 From aa56c16807ba7b8e801216cab012d2f498755ba5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:47 +0100 Subject: [POWERPC] spufs: remove superfluous SPU_STATE_SAVED assignments unbind_context already sets the context state to SPU_STATE_SAVED, thus the spu_deactivate callers don't need to do it again. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 4 +--- arch/powerpc/platforms/cell/spufs/sched.c | 1 - 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 28c718ca3b51..dd89aa7c1f16 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -197,10 +197,8 @@ void spu_acquire_saved(struct spu_context *ctx) up_read(&ctx->state_sema); down_write(&ctx->state_sema); - if (ctx->state == SPU_STATE_RUNNABLE) { + if (ctx->state == SPU_STATE_RUNNABLE) spu_deactivate(ctx); - ctx->state = SPU_STATE_SAVED; - } downgrade_write(&ctx->state_sema); } diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index bd6fe4b7a84b..6599cba9689b 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -315,7 +315,6 @@ void spu_yield(struct spu_context *ctx) pr_debug("%s: yielding SPU %d NODE %d\n", __FUNCTION__, spu->number, spu->node); spu_deactivate(ctx); - ctx->state = SPU_STATE_SAVED; need_yield = 1; } else { spu->prio = MAX_PRIO; -- cgit v1.2.2 From 81998bafe299b8b675157f0a4dfe8dad43215da9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:48 +0100 Subject: [POWERPC] spufs: bind_context sets SPU_STATE_RUNNABLE Only bind_context/unbind_context change the spu context state. Thus we can move all assignents of SPU_STATE_RUNNABLE into bind_context, which parallels the unbind side aswell. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 2 -- arch/powerpc/platforms/cell/spufs/sched.c | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index dd89aa7c1f16..ccffc449763b 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -139,7 +139,6 @@ int spu_acquire_exclusive(struct spu_context *ctx) ret = spu_activate(ctx, 0); if (ret) goto out; - ctx->state = SPU_STATE_RUNNABLE; } else { /* We need to exclude userspace access to the context. */ spu_unmap_mappings(ctx); @@ -173,7 +172,6 @@ int spu_acquire_runnable(struct spu_context *ctx) ret = spu_activate(ctx, 0); if (ret) goto out; - ctx->state = SPU_STATE_RUNNABLE; } downgrade_write(&ctx->state_sema); diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 6599cba9689b..7e9657eb690c 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -118,6 +118,8 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx) spu->timestamp = jiffies; spu_cpu_affinity_set(spu, raw_smp_processor_id()); spu_switch_notify(spu, ctx); + + ctx->state = SPU_STATE_RUNNABLE; } static inline void unbind_context(struct spu *spu, struct spu_context *ctx) -- cgit v1.2.2 From 202557d29eae528f464652e92085f3b19b05a0a7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:49 +0100 Subject: [POWERPC] spufs: sched.c cleanups Various cleanups to sched.c that don't change the global control flow: - add kerneldoc comments to various functions - add spu_ prefixes to various functions - add/remove context from the runqueue in bind/unbind_context as it's part of the logical operation - add a call to put_active_spu to spu_unbind_contex as it's logically part of the unbind operation Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/sched.c | 98 +++++++++++++++++++------------ 1 file changed, 61 insertions(+), 37 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 7e9657eb690c..1d330f67f5ae 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -68,6 +68,43 @@ static inline int node_allowed(int node) return 1; } +/** + * spu_add_to_active_list - add spu to active list + * @spu: spu to add to the active list + */ +static void spu_add_to_active_list(struct spu *spu) +{ + mutex_lock(&spu_prio->active_mutex[spu->node]); + list_add_tail(&spu->list, &spu_prio->active_list[spu->node]); + mutex_unlock(&spu_prio->active_mutex[spu->node]); +} + +/** + * spu_remove_from_active_list - remove spu from active list + * @spu: spu to remove from the active list + * + * This function removes an spu from the active list. If the spu was + * found on the active list the function returns 1, else it doesn't do + * anything and returns 0. + */ +static int spu_remove_from_active_list(struct spu *spu) +{ + int node = spu->node; + struct spu *tmp; + int rc = 0; + + mutex_lock(&spu_prio->active_mutex[node]); + list_for_each_entry(tmp, &spu_prio->active_list[node], list) { + if (tmp == spu) { + list_del_init(&spu->list); + rc = 1; + break; + } + } + mutex_unlock(&spu_prio->active_mutex[node]); + return rc; +} + static inline void mm_needs_global_tlbie(struct mm_struct *mm) { int nr = (NR_CPUS > 1) ? NR_CPUS : NR_CPUS + 1; @@ -94,8 +131,12 @@ int spu_switch_event_unregister(struct notifier_block * n) return blocking_notifier_chain_unregister(&spu_switch_notifier, n); } - -static inline void bind_context(struct spu *spu, struct spu_context *ctx) +/** + * spu_bind_context - bind spu context to physical spu + * @spu: physical spu to bind to + * @ctx: context to bind + */ +static void spu_bind_context(struct spu *spu, struct spu_context *ctx) { pr_debug("%s: pid=%d SPU=%d NODE=%d\n", __FUNCTION__, current->pid, spu->number, spu->node); @@ -118,14 +159,24 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx) spu->timestamp = jiffies; spu_cpu_affinity_set(spu, raw_smp_processor_id()); spu_switch_notify(spu, ctx); - + spu_add_to_active_list(spu); ctx->state = SPU_STATE_RUNNABLE; } -static inline void unbind_context(struct spu *spu, struct spu_context *ctx) +/** + * spu_unbind_context - unbind spu context from physical spu + * @spu: physical spu to unbind from + * @ctx: context to unbind + * + * If the spu was on the active list the function returns 1, else 0. + */ +static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) { + int was_active = spu_remove_from_active_list(spu); + pr_debug("%s: unbind pid=%d SPU=%d NODE=%d\n", __FUNCTION__, spu->pid, spu->number, spu->node); + spu_switch_notify(spu, NULL); spu_unmap_mappings(ctx); spu_save(&ctx->csa, spu); @@ -143,6 +194,8 @@ static inline void unbind_context(struct spu *spu, struct spu_context *ctx) ctx->spu = NULL; spu->flags = 0; spu->ctx = NULL; + + return was_active; } static inline void spu_add_wq(wait_queue_head_t * wq, wait_queue_t * wait, @@ -199,33 +252,6 @@ static void spu_prio_wakeup(void) } } -static int get_active_spu(struct spu *spu) -{ - int node = spu->node; - struct spu *tmp; - int rc = 0; - - mutex_lock(&spu_prio->active_mutex[node]); - list_for_each_entry(tmp, &spu_prio->active_list[node], list) { - if (tmp == spu) { - list_del_init(&spu->list); - rc = 1; - break; - } - } - mutex_unlock(&spu_prio->active_mutex[node]); - return rc; -} - -static void put_active_spu(struct spu *spu) -{ - int node = spu->node; - - mutex_lock(&spu_prio->active_mutex[node]); - list_add_tail(&spu->list, &spu_prio->active_list[node]); - mutex_unlock(&spu_prio->active_mutex[node]); -} - static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags) { struct spu *spu = NULL; @@ -275,8 +301,7 @@ int spu_activate(struct spu_context *ctx, u64 flags) spu_prio_wakeup(); break; } - bind_context(spu, ctx); - put_active_spu(spu); + spu_bind_context(spu, ctx); break; } spu_prio_wait(ctx, flags); @@ -292,14 +317,13 @@ int spu_activate(struct spu_context *ctx, u64 flags) void spu_deactivate(struct spu_context *ctx) { struct spu *spu; - int needs_idle; + int was_active; spu = ctx->spu; if (!spu) return; - needs_idle = get_active_spu(spu); - unbind_context(spu, ctx); - if (needs_idle) { + was_active = spu_unbind_context(spu, ctx); + if (was_active) { spu_free(spu); spu_prio_wakeup(); } -- cgit v1.2.2 From 650f8b0291ecd0abdeadbd0ff3d70c3538e55405 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:36:50 +0100 Subject: [POWERPC] spufs: simplify state_mutex The r/w semaphore to lock the spus was overkill and can be replaced with a mutex to make it faster, simpler and easier to debug. It also helps to allow making most spufs interruptible in future patches. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 33 +++++++++-------------------- arch/powerpc/platforms/cell/spufs/sched.c | 8 +++---- arch/powerpc/platforms/cell/spufs/spufs.h | 6 +++--- 3 files changed, 17 insertions(+), 30 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index ccffc449763b..c9aab9b1cd8a 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -42,7 +42,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) } spin_lock_init(&ctx->mmio_lock); kref_init(&ctx->kref); - init_rwsem(&ctx->state_sema); + mutex_init(&ctx->state_mutex); init_MUTEX(&ctx->run_sema); init_waitqueue_head(&ctx->ibox_wq); init_waitqueue_head(&ctx->wbox_wq); @@ -65,9 +65,9 @@ void destroy_spu_context(struct kref *kref) { struct spu_context *ctx; ctx = container_of(kref, struct spu_context, kref); - down_write(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); spu_deactivate(ctx); - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); spu_fini_csa(&ctx->csa); if (ctx->gang) spu_gang_remove_ctx(ctx->gang, ctx); @@ -98,12 +98,12 @@ void spu_forget(struct spu_context *ctx) void spu_acquire(struct spu_context *ctx) { - down_read(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); } void spu_release(struct spu_context *ctx) { - up_read(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); } void spu_unmap_mappings(struct spu_context *ctx) @@ -128,7 +128,7 @@ int spu_acquire_exclusive(struct spu_context *ctx) { int ret = 0; - down_write(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); /* ctx is about to be freed, can't acquire any more */ if (!ctx->owner) { ret = -EINVAL; @@ -146,7 +146,7 @@ int spu_acquire_exclusive(struct spu_context *ctx) out: if (ret) - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); return ret; } @@ -154,14 +154,12 @@ int spu_acquire_runnable(struct spu_context *ctx) { int ret = 0; - down_read(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); if (ctx->state == SPU_STATE_RUNNABLE) { ctx->spu->prio = current->prio; return 0; } - up_read(&ctx->state_sema); - down_write(&ctx->state_sema); /* ctx is about to be freed, can't acquire any more */ if (!ctx->owner) { ret = -EINVAL; @@ -174,29 +172,18 @@ int spu_acquire_runnable(struct spu_context *ctx) goto out; } - downgrade_write(&ctx->state_sema); /* On success, we return holding the lock */ - return ret; out: /* Release here, to simplify calling code. */ - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); return ret; } void spu_acquire_saved(struct spu_context *ctx) { - down_read(&ctx->state_sema); - - if (ctx->state == SPU_STATE_SAVED) - return; - - up_read(&ctx->state_sema); - down_write(&ctx->state_sema); - + mutex_lock(&ctx->state_mutex); if (ctx->state == SPU_STATE_RUNNABLE) spu_deactivate(ctx); - - downgrade_write(&ctx->state_sema); } diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 1d330f67f5ae..c61a34b14083 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -233,11 +233,11 @@ static void spu_prio_wait(struct spu_context *ctx, u64 flags) spu_add_wq(wq, &wait, prio); if (!signal_pending(current)) { - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); pr_debug("%s: pid=%d prio=%d\n", __FUNCTION__, current->pid, current->prio); schedule(); - down_write(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); } spu_del_wq(wq, &wait, prio); @@ -334,7 +334,7 @@ void spu_yield(struct spu_context *ctx) struct spu *spu; int need_yield = 0; - if (down_write_trylock(&ctx->state_sema)) { + if (mutex_trylock(&ctx->state_mutex)) { if ((spu = ctx->spu) != NULL) { int best = sched_find_first_bit(spu_prio->bitmap); if (best < MAX_PRIO) { @@ -346,7 +346,7 @@ void spu_yield(struct spu_context *ctx) spu->prio = MAX_PRIO; } } - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); } if (unlikely(need_yield)) yield(); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 9b44abe921cc..de2401afb226 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -23,7 +23,7 @@ #define SPUFS_H #include -#include +#include #include #include @@ -53,7 +53,7 @@ struct spu_context { u64 object_id; /* user space pointer for oprofile */ enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state; - struct rw_semaphore state_sema; + struct mutex state_mutex; struct semaphore run_sema; struct mm_struct *owner; @@ -173,7 +173,7 @@ int spu_acquire_exclusive(struct spu_context *ctx); static inline void spu_release_exclusive(struct spu_context *ctx) { - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); } int spu_activate(struct spu_context *ctx, u64 flags); -- cgit v1.2.2 From c0d56408e3ff52d635441e0f08d12164a63728cf Mon Sep 17 00:00:00 2001 From: Kazunori MIYAZAWA Date: Tue, 13 Feb 2007 12:54:47 -0800 Subject: [IPSEC]: Changing API of xfrm4_tunnel_register. This patch changes xfrm4_tunnel register and deregister interface to prepare for solving the conflict of device tunnels with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA Signed-off-by: David S. Miller --- include/net/xfrm.h | 4 ++-- net/ipv4/ipip.c | 6 +++--- net/ipv4/tunnel4.c | 50 +++++++++++++++++++++++++++++++++++++++++++++---- net/ipv4/xfrm4_input.c | 4 +++- net/ipv4/xfrm4_tunnel.c | 29 ++++++++++++++++++++++++---- 5 files changed, 79 insertions(+), 14 deletions(-) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 16924cb772c9..20be8beb9a11 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -946,8 +946,8 @@ extern int xfrm_state_mtu(struct xfrm_state *x, int mtu); extern int xfrm_init_state(struct xfrm_state *x); extern int xfrm4_rcv(struct sk_buff *skb); extern int xfrm4_output(struct sk_buff *skb); -extern int xfrm4_tunnel_register(struct xfrm_tunnel *handler); -extern int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler); +extern int xfrm4_tunnel_register(struct xfrm_tunnel *handler, unsigned short family); +extern int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler, unsigned short family); extern int xfrm6_rcv_spi(struct sk_buff *skb, __be32 spi); extern int xfrm6_rcv(struct sk_buff **pskb); extern int xfrm6_input_addr(struct sk_buff *skb, xfrm_address_t *daddr, diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index 475bcd1e4181..9b561e633b00 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -871,7 +871,7 @@ static int __init ipip_init(void) printk(banner); - if (xfrm4_tunnel_register(&ipip_handler)) { + if (xfrm4_tunnel_register(&ipip_handler, AF_INET)) { printk(KERN_INFO "ipip init: can't register tunnel\n"); return -EAGAIN; } @@ -893,7 +893,7 @@ static int __init ipip_init(void) err2: free_netdev(ipip_fb_tunnel_dev); err1: - xfrm4_tunnel_deregister(&ipip_handler); + xfrm4_tunnel_deregister(&ipip_handler, AF_INET); goto out; } @@ -913,7 +913,7 @@ static void __exit ipip_destroy_tunnels(void) static void __exit ipip_fini(void) { - if (xfrm4_tunnel_deregister(&ipip_handler)) + if (xfrm4_tunnel_deregister(&ipip_handler, AF_INET)) printk(KERN_INFO "ipip close: can't deregister tunnel\n"); rtnl_lock(); diff --git a/net/ipv4/tunnel4.c b/net/ipv4/tunnel4.c index 8d30c48f090e..a794a8ca8b4f 100644 --- a/net/ipv4/tunnel4.c +++ b/net/ipv4/tunnel4.c @@ -14,9 +14,10 @@ #include static struct xfrm_tunnel *tunnel4_handlers; +static struct xfrm_tunnel *tunnel64_handlers; static DEFINE_MUTEX(tunnel4_mutex); -int xfrm4_tunnel_register(struct xfrm_tunnel *handler) +int xfrm4_tunnel_register(struct xfrm_tunnel *handler, unsigned short family) { struct xfrm_tunnel **pprev; int ret = -EEXIST; @@ -24,7 +25,8 @@ int xfrm4_tunnel_register(struct xfrm_tunnel *handler) mutex_lock(&tunnel4_mutex); - for (pprev = &tunnel4_handlers; *pprev; pprev = &(*pprev)->next) { + for (pprev = (family == AF_INET) ? &tunnel4_handlers : &tunnel64_handlers; + *pprev; pprev = &(*pprev)->next) { if ((*pprev)->priority > priority) break; if ((*pprev)->priority == priority) @@ -44,14 +46,15 @@ err: EXPORT_SYMBOL(xfrm4_tunnel_register); -int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler) +int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler, unsigned short family) { struct xfrm_tunnel **pprev; int ret = -ENOENT; mutex_lock(&tunnel4_mutex); - for (pprev = &tunnel4_handlers; *pprev; pprev = &(*pprev)->next) { + for (pprev = (family == AF_INET) ? &tunnel4_handlers : &tunnel64_handlers; + *pprev; pprev = &(*pprev)->next) { if (*pprev == handler) { *pprev = handler->next; ret = 0; @@ -86,6 +89,26 @@ drop: return 0; } +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +static int tunnel64_rcv(struct sk_buff *skb) +{ + struct xfrm_tunnel *handler; + + if (!pskb_may_pull(skb, sizeof(struct iphdr))) + goto drop; + + for (handler = tunnel64_handlers; handler; handler = handler->next) + if (!handler->handler(skb)) + return 0; + + icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0); + +drop: + kfree_skb(skb); + return 0; +} +#endif + static void tunnel4_err(struct sk_buff *skb, u32 info) { struct xfrm_tunnel *handler; @@ -101,17 +124,36 @@ static struct net_protocol tunnel4_protocol = { .no_policy = 1, }; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +static struct net_protocol tunnel64_protocol = { + .handler = tunnel64_rcv, + .err_handler = tunnel4_err, + .no_policy = 1, +}; +#endif + static int __init tunnel4_init(void) { if (inet_add_protocol(&tunnel4_protocol, IPPROTO_IPIP)) { printk(KERN_ERR "tunnel4 init: can't add protocol\n"); return -EAGAIN; } +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + if (inet_add_protocol(&tunnel64_protocol, IPPROTO_IPV6)) { + printk(KERN_ERR "tunnel64 init: can't add protocol\n"); + inet_del_protocol(&tunnel4_protocol, IPPROTO_IPIP); + return -EAGAIN; + } +#endif return 0; } static void __exit tunnel4_fini(void) { +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + if (inet_del_protocol(&tunnel64_protocol, IPPROTO_IPV6)) + printk(KERN_ERR "tunnel64 close: can't remove protocol\n"); +#endif if (inet_del_protocol(&tunnel4_protocol, IPPROTO_IPIP)) printk(KERN_ERR "tunnel4 close: can't remove protocol\n"); } diff --git a/net/ipv4/xfrm4_input.c b/net/ipv4/xfrm4_input.c index 289146bdb8b0..78e80deb7e89 100644 --- a/net/ipv4/xfrm4_input.c +++ b/net/ipv4/xfrm4_input.c @@ -27,6 +27,7 @@ static int xfrm4_parse_spi(struct sk_buff *skb, u8 nexthdr, __be32 *spi, __be32 { switch (nexthdr) { case IPPROTO_IPIP: + case IPPROTO_IPV6: *spi = skb->nh.iph->saddr; *seq = 0; return 0; @@ -70,7 +71,8 @@ int xfrm4_rcv_encap(struct sk_buff *skb, __u16 encap_type) if (xfrm_nr == XFRM_MAX_DEPTH) goto drop; - x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, iph->protocol, AF_INET); + x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, + iph->protocol != IPPROTO_IPV6 ? iph->protocol : IPPROTO_IPIP, AF_INET); if (x == NULL) goto drop; diff --git a/net/ipv4/xfrm4_tunnel.c b/net/ipv4/xfrm4_tunnel.c index 1be6762b2d47..3eef06454da9 100644 --- a/net/ipv4/xfrm4_tunnel.c +++ b/net/ipv4/xfrm4_tunnel.c @@ -64,24 +64,45 @@ static struct xfrm_tunnel xfrm_tunnel_handler = { .priority = 2, }; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +static struct xfrm_tunnel xfrm64_tunnel_handler = { + .handler = xfrm4_rcv, + .err_handler = xfrm_tunnel_err, + .priority = 2, +}; +#endif + static int __init ipip_init(void) { if (xfrm_register_type(&ipip_type, AF_INET) < 0) { printk(KERN_INFO "ipip init: can't add xfrm type\n"); return -EAGAIN; } - if (xfrm4_tunnel_register(&xfrm_tunnel_handler)) { - printk(KERN_INFO "ipip init: can't add xfrm handler\n"); + + if (xfrm4_tunnel_register(&xfrm_tunnel_handler, AF_INET)) { + printk(KERN_INFO "ipip init: can't add xfrm handler for AF_INET\n"); + xfrm_unregister_type(&ipip_type, AF_INET); + return -EAGAIN; + } +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + if (xfrm4_tunnel_register(&xfrm64_tunnel_handler, AF_INET6)) { + printk(KERN_INFO "ipip init: can't add xfrm handler for AF_INET6\n"); + xfrm4_tunnel_deregister(&xfrm_tunnel_handler, AF_INET); xfrm_unregister_type(&ipip_type, AF_INET); return -EAGAIN; } +#endif return 0; } static void __exit ipip_fini(void) { - if (xfrm4_tunnel_deregister(&xfrm_tunnel_handler)) - printk(KERN_INFO "ipip close: can't remove xfrm handler\n"); +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + if (xfrm4_tunnel_deregister(&xfrm64_tunnel_handler, AF_INET6)) + printk(KERN_INFO "ipip close: can't remove xfrm handler for AF_INET6\n"); +#endif + if (xfrm4_tunnel_deregister(&xfrm_tunnel_handler, AF_INET)) + printk(KERN_INFO "ipip close: can't remove xfrm handler for AF_INET\n"); if (xfrm_unregister_type(&ipip_type, AF_INET) < 0) printk(KERN_INFO "ipip close: can't remove xfrm type\n"); } -- cgit v1.2.2 From c73cb5a2d607b5b95a06a54d8291ddb659b348b6 Mon Sep 17 00:00:00 2001 From: Kazunori MIYAZAWA Date: Tue, 13 Feb 2007 12:55:25 -0800 Subject: [IPSEC]: make sit use the xfrm4_tunnel_register This patch makes sit use xfrm4_tunnel_register instead of inet_add_protocol. It solves conflict of sit device with inter address family IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA Signed-off-by: David S. Miller --- net/ipv6/Kconfig | 1 + net/ipv6/sit.c | 30 ++++++++++++++++++------------ 2 files changed, 19 insertions(+), 12 deletions(-) diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index deb4101a2a81..79682efb14be 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -156,6 +156,7 @@ config INET6_XFRM_MODE_ROUTEOPTIMIZATION config IPV6_SIT tristate "IPv6: IPv6-in-IPv4 tunnel (SIT driver)" depends on IPV6 + select INET_TUNNEL default y ---help--- Tunneling means encapsulating data of one protocol type within diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 4d3cf301e1fc..862ed7c52c38 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -216,7 +216,7 @@ static void ipip6_tunnel_uninit(struct net_device *dev) } -static void ipip6_err(struct sk_buff *skb, u32 info) +static int ipip6_err(struct sk_buff *skb, u32 info) { #ifndef I_WISH_WORLD_WERE_PERFECT @@ -228,21 +228,22 @@ static void ipip6_err(struct sk_buff *skb, u32 info) int type = skb->h.icmph->type; int code = skb->h.icmph->code; struct ip_tunnel *t; + int err; switch (type) { default: case ICMP_PARAMETERPROB: - return; + return 0; case ICMP_DEST_UNREACH: switch (code) { case ICMP_SR_FAILED: case ICMP_PORT_UNREACH: /* Impossible event. */ - return; + return 0; case ICMP_FRAG_NEEDED: /* Soft state for pmtu is maintained by IP core. */ - return; + return 0; default: /* All others are translated to HOST_UNREACH. rfc2003 contains "deep thoughts" about NET_UNREACH, @@ -253,14 +254,18 @@ static void ipip6_err(struct sk_buff *skb, u32 info) break; case ICMP_TIME_EXCEEDED: if (code != ICMP_EXC_TTL) - return; + return 0; break; } + err = -ENOENT; + read_lock(&ipip6_lock); t = ipip6_tunnel_lookup(iph->daddr, iph->saddr); if (t == NULL || t->parms.iph.daddr == 0) goto out; + + err = 0; if (t->parms.iph.ttl == 0 && type == ICMP_TIME_EXCEEDED) goto out; @@ -271,7 +276,7 @@ static void ipip6_err(struct sk_buff *skb, u32 info) t->err_time = jiffies; out: read_unlock(&ipip6_lock); - return; + return err; #else struct iphdr *iph = (struct iphdr*)dp; int hlen = iph->ihl<<2; @@ -332,7 +337,7 @@ out: /* Prepare fake skb to feed it to icmpv6_send */ skb2 = skb_clone(skb, GFP_ATOMIC); if (skb2 == NULL) - return; + return 0; dst_release(skb2->dst); skb2->dst = NULL; skb_pull(skb2, skb->data - (u8*)iph6); @@ -355,7 +360,7 @@ out: } } kfree_skb(skb2); - return; + return 0; #endif } @@ -791,9 +796,10 @@ static int __init ipip6_fb_tunnel_init(struct net_device *dev) return 0; } -static struct net_protocol sit_protocol = { +static struct xfrm_tunnel sit_handler = { .handler = ipip6_rcv, .err_handler = ipip6_err, + .priority = 1, }; static void __exit sit_destroy_tunnels(void) @@ -812,7 +818,7 @@ static void __exit sit_destroy_tunnels(void) static void __exit sit_cleanup(void) { - inet_del_protocol(&sit_protocol, IPPROTO_IPV6); + xfrm4_tunnel_deregister(&sit_handler, AF_INET6); rtnl_lock(); sit_destroy_tunnels(); @@ -826,7 +832,7 @@ static int __init sit_init(void) printk(KERN_INFO "IPv6 over IPv4 tunneling driver\n"); - if (inet_add_protocol(&sit_protocol, IPPROTO_IPV6) < 0) { + if (xfrm4_tunnel_register(&sit_handler, AF_INET6) < 0) { printk(KERN_INFO "sit init: Can't add protocol\n"); return -EAGAIN; } @@ -848,7 +854,7 @@ static int __init sit_init(void) err2: free_netdev(ipip6_fb_tunnel_dev); err1: - inet_del_protocol(&sit_protocol, IPPROTO_IPV6); + xfrm4_tunnel_deregister(&sit_handler, AF_INET6); goto out; } -- cgit v1.2.2 From 6a0641e51011def4e308fd07387047f5ee50647f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:21 +0100 Subject: [POWERPC] spufs: state_mutex cleanup Various cleanups in code surrounding the state semaphore: - inline spu_acquire/spu_release - cleanup spu_acquire_* and add kerneldoc comments to these functions - remove spu_release_exclusive and replace it with spu_release Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 97 ++++++++++++++++------------- arch/powerpc/platforms/cell/spufs/run.c | 2 +- arch/powerpc/platforms/cell/spufs/spufs.h | 18 +++--- 3 files changed, 64 insertions(+), 53 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index c9aab9b1cd8a..f2630dc0db89 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -96,16 +96,6 @@ void spu_forget(struct spu_context *ctx) spu_release(ctx); } -void spu_acquire(struct spu_context *ctx) -{ - mutex_lock(&ctx->state_mutex); -} - -void spu_release(struct spu_context *ctx) -{ - mutex_unlock(&ctx->state_mutex); -} - void spu_unmap_mappings(struct spu_context *ctx) { if (ctx->local_store) @@ -124,66 +114,85 @@ void spu_unmap_mappings(struct spu_context *ctx) unmap_mapping_range(ctx->psmap, 0, 0x20000, 1); } +/** + * spu_acquire_exclusive - lock spu contex and protect against userspace access + * @ctx: spu contex to lock + * + * Note: + * Returns 0 and with the context locked on success + * Returns negative error and with the context _unlocked_ on failure. + */ int spu_acquire_exclusive(struct spu_context *ctx) { - int ret = 0; + int ret = -EINVAL; - mutex_lock(&ctx->state_mutex); - /* ctx is about to be freed, can't acquire any more */ - if (!ctx->owner) { - ret = -EINVAL; - goto out; - } + spu_acquire(ctx); + /* + * Context is about to be freed, so we can't acquire it anymore. + */ + if (!ctx->owner) + goto out_unlock; if (ctx->state == SPU_STATE_SAVED) { ret = spu_activate(ctx, 0); if (ret) - goto out; + goto out_unlock; } else { - /* We need to exclude userspace access to the context. */ + /* + * We need to exclude userspace access to the context. + * + * To protect against memory access we invalidate all ptes + * and make sure the pagefault handlers block on the mutex. + */ spu_unmap_mappings(ctx); } -out: - if (ret) - mutex_unlock(&ctx->state_mutex); + return 0; + + out_unlock: + spu_release(ctx); return ret; } +/** + * spu_acquire_runnable - lock spu contex and make sure it is in runnable state + * @ctx: spu contex to lock + * + * Note: + * Returns 0 and with the context locked on success + * Returns negative error and with the context _unlocked_ on failure. + */ int spu_acquire_runnable(struct spu_context *ctx) { - int ret = 0; - - mutex_lock(&ctx->state_mutex); - if (ctx->state == SPU_STATE_RUNNABLE) { - ctx->spu->prio = current->prio; - return 0; - } - - /* ctx is about to be freed, can't acquire any more */ - if (!ctx->owner) { - ret = -EINVAL; - goto out; - } + int ret = -EINVAL; + spu_acquire(ctx); if (ctx->state == SPU_STATE_SAVED) { + /* + * Context is about to be freed, so we can't acquire it anymore. + */ + if (!ctx->owner) + goto out_unlock; ret = spu_activate(ctx, 0); if (ret) - goto out; - } + goto out_unlock; + } else + ctx->spu->prio = current->prio; - /* On success, we return holding the lock */ - return ret; -out: - /* Release here, to simplify calling code. */ - mutex_unlock(&ctx->state_mutex); + return 0; + out_unlock: + spu_release(ctx); return ret; } +/** + * spu_acquire_saved - lock spu contex and make sure it is in saved state + * @ctx: spu contex to lock + */ void spu_acquire_saved(struct spu_context *ctx) { - mutex_lock(&ctx->state_mutex); - if (ctx->state == SPU_STATE_RUNNABLE) + spu_acquire(ctx); + if (ctx->state != SPU_STATE_SAVED) spu_deactivate(ctx); } diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 51b78da2f0d3..e1647311044b 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -133,7 +133,7 @@ out_drop_priv: spu_mfc_sr1_set(ctx->spu, sr1); out_unlock: - spu_release_exclusive(ctx); + spu_release(ctx); out: return ret; } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index de2401afb226..fa07ec2e2c1a 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -158,6 +158,16 @@ void spu_gang_remove_ctx(struct spu_gang *gang, struct spu_context *ctx); void spu_gang_add_ctx(struct spu_gang *gang, struct spu_context *ctx); /* context management */ +static inline void spu_acquire(struct spu_context *ctx) +{ + mutex_lock(&ctx->state_mutex); +} + +static inline void spu_release(struct spu_context *ctx) +{ + mutex_unlock(&ctx->state_mutex); +} + struct spu_context * alloc_spu_context(struct spu_gang *gang); void destroy_spu_context(struct kref *kref); struct spu_context * get_spu_context(struct spu_context *ctx); @@ -165,17 +175,9 @@ int put_spu_context(struct spu_context *ctx); void spu_unmap_mappings(struct spu_context *ctx); void spu_forget(struct spu_context *ctx); -void spu_acquire(struct spu_context *ctx); -void spu_release(struct spu_context *ctx); int spu_acquire_runnable(struct spu_context *ctx); void spu_acquire_saved(struct spu_context *ctx); int spu_acquire_exclusive(struct spu_context *ctx); - -static inline void spu_release_exclusive(struct spu_context *ctx) -{ - mutex_unlock(&ctx->state_mutex); -} - int spu_activate(struct spu_context *ctx, u64 flags); void spu_deactivate(struct spu_context *ctx); void spu_yield(struct spu_context *ctx); -- cgit v1.2.2 From 8389998ae9ea2888c86c446f7911ddced50052a1 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:22 +0100 Subject: [POWERPC] spufs: move prio to spu_context It doesn't make any sense to have a priority field in the physical spu structure. Move it into the spu context instead. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 4 ++-- arch/powerpc/platforms/cell/spufs/sched.c | 6 +----- arch/powerpc/platforms/cell/spufs/spufs.h | 3 +++ arch/powerpc/xmon/xmon.c | 1 - include/asm-powerpc/spu.h | 1 - 5 files changed, 6 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index f2630dc0db89..88a887186303 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -53,6 +53,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) ctx->owner = get_task_mm(current); if (gang) spu_gang_add_ctx(gang, ctx); + ctx->prio = current->prio; goto out; out_free: kfree(ctx); @@ -176,8 +177,7 @@ int spu_acquire_runnable(struct spu_context *ctx) ret = spu_activate(ctx, 0); if (ret) goto out_unlock; - } else - ctx->spu->prio = current->prio; + } return 0; diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index c61a34b14083..03b357ce3987 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -145,7 +145,6 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) ctx->spu = spu; ctx->ops = &spu_hw_ops; spu->pid = current->pid; - spu->prio = current->prio; spu->mm = ctx->owner; mm_needs_global_tlbie(spu->mm); spu->ibox_callback = spufs_ibox_callback; @@ -189,7 +188,6 @@ static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) spu->dma_callback = NULL; spu->mm = NULL; spu->pid = 0; - spu->prio = MAX_PRIO; ctx->ops = &spu_backing_ops; ctx->spu = NULL; spu->flags = 0; @@ -223,7 +221,7 @@ static inline void spu_del_wq(wait_queue_head_t * wq, wait_queue_t * wait, static void spu_prio_wait(struct spu_context *ctx, u64 flags) { - int prio = current->prio; + int prio = ctx->prio; wait_queue_head_t *wq = &spu_prio->waitq[prio]; DEFINE_WAIT(wait); @@ -342,8 +340,6 @@ void spu_yield(struct spu_context *ctx) __FUNCTION__, spu->number, spu->node); spu_deactivate(ctx); need_yield = 1; - } else { - spu->prio = MAX_PRIO; } } mutex_unlock(&ctx->state_mutex); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index fa07ec2e2c1a..b500e94188b5 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -74,6 +74,9 @@ struct spu_context { struct list_head gang_list; struct spu_gang *gang; + + /* scheduler fields */ + int prio; }; struct spu_gang { diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 77540a2f7704..0183e5fbaf46 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2811,7 +2811,6 @@ static void dump_spu_fields(struct spu *spu) DUMP_FIELD(spu, "0x%lx", irqs[2]); DUMP_FIELD(spu, "0x%x", slb_replace); DUMP_FIELD(spu, "%d", pid); - DUMP_FIELD(spu, "%d", prio); DUMP_FIELD(spu, "0x%p", mm); DUMP_FIELD(spu, "0x%p", ctx); DUMP_FIELD(spu, "0x%p", rq); diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index b634e16575f2..0f9f2dd24a79 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -129,7 +129,6 @@ struct spu { struct spu_runqueue *rq; unsigned long long timestamp; pid_t pid; - int prio; int class_0_pending; spinlock_t register_lock; -- cgit v1.2.2 From 079cdb61614c466c939ebf74c7ef6745667bc61e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:23 +0100 Subject: [POWERPC] spufs: runqueue simplification This is the biggest patch in this series, and it reworks the guts of the spu scheduler runqueue mechanism: - instead of embedding a waitqueue in the runqueue there is now a simple doubly-linked list, the actual wakeups happen by reusing the stop_wq in the spu context (maybe we should rename it one day) - spu_free and spu_prio_wakeup are merged into a single spu_reschedule function - various functionality is split out into small helpers, and kerneldoc comments are added in various places to document what's going on. - spu_activate is rewritten into a tight loop by removing test for various impossible conditions and using the infrastructure in this patch. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/sched.c | 159 +++++++++++++++++------------- arch/powerpc/platforms/cell/spufs/spufs.h | 1 + 2 files changed, 93 insertions(+), 67 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 03b357ce3987..6f8e2257c5a6 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -49,7 +49,8 @@ #define SPU_BITMAP_SIZE (((MAX_PRIO+BITS_PER_LONG)/BITS_PER_LONG)+1) struct spu_prio_array { unsigned long bitmap[SPU_BITMAP_SIZE]; - wait_queue_head_t waitq[MAX_PRIO]; + struct list_head runq[MAX_PRIO]; + spinlock_t runq_lock; struct list_head active_list[MAX_NUMNODES]; struct mutex active_mutex[MAX_NUMNODES]; }; @@ -196,61 +197,91 @@ static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) return was_active; } -static inline void spu_add_wq(wait_queue_head_t * wq, wait_queue_t * wait, - int prio) +/** + * spu_add_to_rq - add a context to the runqueue + * @ctx: context to add + */ +static void spu_add_to_rq(struct spu_context *ctx) { - prepare_to_wait_exclusive(wq, wait, TASK_INTERRUPTIBLE); - set_bit(prio, spu_prio->bitmap); + spin_lock(&spu_prio->runq_lock); + list_add_tail(&ctx->rq, &spu_prio->runq[ctx->prio]); + set_bit(ctx->prio, spu_prio->bitmap); + spin_unlock(&spu_prio->runq_lock); } -static inline void spu_del_wq(wait_queue_head_t * wq, wait_queue_t * wait, - int prio) +/** + * spu_del_from_rq - remove a context from the runqueue + * @ctx: context to remove + */ +static void spu_del_from_rq(struct spu_context *ctx) { - u64 flags; - - __set_current_state(TASK_RUNNING); - - spin_lock_irqsave(&wq->lock, flags); + spin_lock(&spu_prio->runq_lock); + list_del_init(&ctx->rq); + if (list_empty(&spu_prio->runq[ctx->prio])) + clear_bit(ctx->prio, spu_prio->bitmap); + spin_unlock(&spu_prio->runq_lock); +} - remove_wait_queue_locked(wq, wait); - if (list_empty(&wq->task_list)) - clear_bit(prio, spu_prio->bitmap); +/** + * spu_grab_context - remove one context from the runqueue + * @prio: priority of the context to be removed + * + * This function removes one context from the runqueue for priority @prio. + * If there is more than one context with the given priority the first + * task on the runqueue will be taken. + * + * Returns the spu_context it just removed. + * + * Must be called with spu_prio->runq_lock held. + */ +static struct spu_context *spu_grab_context(int prio) +{ + struct list_head *rq = &spu_prio->runq[prio]; - spin_unlock_irqrestore(&wq->lock, flags); + if (list_empty(rq)) + return NULL; + return list_entry(rq->next, struct spu_context, rq); } -static void spu_prio_wait(struct spu_context *ctx, u64 flags) +static void spu_prio_wait(struct spu_context *ctx) { - int prio = ctx->prio; - wait_queue_head_t *wq = &spu_prio->waitq[prio]; DEFINE_WAIT(wait); - if (ctx->spu) - return; - - spu_add_wq(wq, &wait, prio); + prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE); if (!signal_pending(current)) { mutex_unlock(&ctx->state_mutex); - pr_debug("%s: pid=%d prio=%d\n", __FUNCTION__, - current->pid, current->prio); schedule(); mutex_lock(&ctx->state_mutex); } - - spu_del_wq(wq, &wait, prio); + __set_current_state(TASK_RUNNING); + remove_wait_queue(&ctx->stop_wq, &wait); } -static void spu_prio_wakeup(void) +/** + * spu_reschedule - try to find a runnable context for a spu + * @spu: spu available + * + * This function is called whenever a spu becomes idle. It looks for the + * most suitable runnable spu context and schedules it for execution. + */ +static void spu_reschedule(struct spu *spu) { - int best = sched_find_first_bit(spu_prio->bitmap); + int best; + + spu_free(spu); + + spin_lock(&spu_prio->runq_lock); + best = sched_find_first_bit(spu_prio->bitmap); if (best < MAX_PRIO) { - wait_queue_head_t *wq = &spu_prio->waitq[best]; - wake_up_interruptible_nr(wq, 1); + struct spu_context *ctx = spu_grab_context(best); + if (ctx) + wake_up(&ctx->stop_wq); } + spin_unlock(&spu_prio->runq_lock); } -static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags) +static struct spu *spu_get_idle(struct spu_context *ctx) { struct spu *spu = NULL; int node = cpu_to_node(raw_smp_processor_id()); @@ -267,15 +298,6 @@ static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags) return spu; } -static inline struct spu *spu_get(struct spu_context *ctx, u64 flags) -{ - /* Future: spu_get_idle() if possible, - * otherwise try to preempt an active - * context. - */ - return spu_get_idle(ctx, flags); -} - /* The three externally callable interfaces * for the scheduler begin here. * @@ -284,32 +306,36 @@ static inline struct spu *spu_get(struct spu_context *ctx, u64 flags) * spu_yield - yield an SPU if others are waiting. */ +/** + * spu_activate - find a free spu for a context and execute it + * @ctx: spu context to schedule + * @flags: flags (currently ignored) + * + * Tries to find a free spu to run @ctx. If no free spu is availble + * add the context to the runqueue so it gets woken up once an spu + * is available. + */ int spu_activate(struct spu_context *ctx, u64 flags) { - struct spu *spu; - int ret = 0; - for (;;) { - if (ctx->spu) - return 0; - spu = spu_get(ctx, flags); - if (spu != NULL) { - if (ctx->spu != NULL) { - spu_free(spu); - spu_prio_wakeup(); - break; - } + if (ctx->spu) + return 0; + + do { + struct spu *spu; + + spu = spu_get_idle(ctx); + if (spu) { spu_bind_context(spu, ctx); - break; - } - spu_prio_wait(ctx, flags); - if (signal_pending(current)) { - ret = -ERESTARTSYS; - spu_prio_wakeup(); - break; + return 0; } - } - return ret; + + spu_add_to_rq(ctx); + spu_prio_wait(ctx); + spu_del_from_rq(ctx); + } while (!signal_pending(current)); + + return -ERESTARTSYS; } void spu_deactivate(struct spu_context *ctx) @@ -321,10 +347,8 @@ void spu_deactivate(struct spu_context *ctx) if (!spu) return; was_active = spu_unbind_context(spu, ctx); - if (was_active) { - spu_free(spu); - spu_prio_wakeup(); - } + if (was_active) + spu_reschedule(spu); } void spu_yield(struct spu_context *ctx) @@ -359,7 +383,7 @@ int __init spu_sched_init(void) return 1; } for (i = 0; i < MAX_PRIO; i++) { - init_waitqueue_head(&spu_prio->waitq[i]); + INIT_LIST_HEAD(&spu_prio->runq[i]); __clear_bit(i, spu_prio->bitmap); } __set_bit(MAX_PRIO, spu_prio->bitmap); @@ -367,6 +391,7 @@ int __init spu_sched_init(void) mutex_init(&spu_prio->active_mutex[i]); INIT_LIST_HEAD(&spu_prio->active_list[i]); } + spin_lock_init(&spu_prio->runq_lock); return 0; } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index b500e94188b5..7f5a4fc03c00 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -76,6 +76,7 @@ struct spu_context { struct spu_gang *gang; /* scheduler fields */ + struct list_head rq; int prio; }; -- cgit v1.2.2 From 26bec67386dbf6ef887254e815398842e182cdcd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:24 +0100 Subject: [POWERPC] spufs: optimize spu_run There is no need to directly wake up contexts in spu_activate when called from spu_run, so add a flag to surpress this wakeup. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 4 ++-- arch/powerpc/platforms/cell/spufs/file.c | 4 ++-- arch/powerpc/platforms/cell/spufs/run.c | 4 ++-- arch/powerpc/platforms/cell/spufs/sched.c | 10 ++++++---- arch/powerpc/platforms/cell/spufs/spufs.h | 13 +++++++++++-- 5 files changed, 23 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 88a887186303..056a8ad02385 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -163,7 +163,7 @@ int spu_acquire_exclusive(struct spu_context *ctx) * Returns 0 and with the context locked on success * Returns negative error and with the context _unlocked_ on failure. */ -int spu_acquire_runnable(struct spu_context *ctx) +int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags) { int ret = -EINVAL; @@ -174,7 +174,7 @@ int spu_acquire_runnable(struct spu_context *ctx) */ if (!ctx->owner) goto out_unlock; - ret = spu_activate(ctx, 0); + ret = spu_activate(ctx, flags); if (ret) goto out_unlock; } diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index a528020baa18..c729813043a6 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -164,7 +164,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, /* error here usually means a signal.. we might want to test * the error code more precisely though */ - ret = spu_acquire_runnable(ctx); + ret = spu_acquire_runnable(ctx, 0); if (ret) return NOPFN_REFAULT; @@ -1306,7 +1306,7 @@ static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer, if (ret) goto out; - spu_acquire_runnable(ctx); + spu_acquire_runnable(ctx, 0); if (file->f_flags & O_NONBLOCK) { ret = ctx->ops->send_mfc_command(ctx, &cmd); } else { diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index e1647311044b..a973e79e9fdc 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -143,7 +143,7 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) int ret; unsigned long runcntl = SPU_RUNCNTL_RUNNABLE; - ret = spu_acquire_runnable(ctx); + ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE); if (ret) return ret; @@ -155,7 +155,7 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) spu_release(ctx); ret = spu_setup_isolated(ctx); if (!ret) - ret = spu_acquire_runnable(ctx); + ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE); } /* if userspace has set the runcntrl register (eg, to issue an diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 6f8e2257c5a6..07d0d095c62a 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -247,8 +247,8 @@ static void spu_prio_wait(struct spu_context *ctx) { DEFINE_WAIT(wait); + set_bit(SPU_SCHED_WAKE, &ctx->sched_flags); prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE); - if (!signal_pending(current)) { mutex_unlock(&ctx->state_mutex); schedule(); @@ -256,6 +256,7 @@ static void spu_prio_wait(struct spu_context *ctx) } __set_current_state(TASK_RUNNING); remove_wait_queue(&ctx->stop_wq, &wait); + clear_bit(SPU_SCHED_WAKE, &ctx->sched_flags); } /** @@ -275,7 +276,7 @@ static void spu_reschedule(struct spu *spu) best = sched_find_first_bit(spu_prio->bitmap); if (best < MAX_PRIO) { struct spu_context *ctx = spu_grab_context(best); - if (ctx) + if (ctx && test_bit(SPU_SCHED_WAKE, &ctx->sched_flags)) wake_up(&ctx->stop_wq); } spin_unlock(&spu_prio->runq_lock); @@ -315,7 +316,7 @@ static struct spu *spu_get_idle(struct spu_context *ctx) * add the context to the runqueue so it gets woken up once an spu * is available. */ -int spu_activate(struct spu_context *ctx, u64 flags) +int spu_activate(struct spu_context *ctx, unsigned long flags) { if (ctx->spu) @@ -331,7 +332,8 @@ int spu_activate(struct spu_context *ctx, u64 flags) } spu_add_to_rq(ctx); - spu_prio_wait(ctx); + if (!(flags & SPU_ACTIVATE_NOWAKE)) + spu_prio_wait(ctx); spu_del_from_rq(ctx); } while (!signal_pending(current)); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 7f5a4fc03c00..421f59167c55 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -39,6 +39,11 @@ enum { struct spu_context_ops; struct spu_gang; +/* ctx->sched_flags */ +enum { + SPU_SCHED_WAKE = 0, +}; + struct spu_context { struct spu *spu; /* pointer to a physical SPU */ struct spu_state csa; /* SPU context save area. */ @@ -77,6 +82,7 @@ struct spu_context { /* scheduler fields */ struct list_head rq; + unsigned long sched_flags; int prio; }; @@ -179,10 +185,13 @@ int put_spu_context(struct spu_context *ctx); void spu_unmap_mappings(struct spu_context *ctx); void spu_forget(struct spu_context *ctx); -int spu_acquire_runnable(struct spu_context *ctx); +int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags); void spu_acquire_saved(struct spu_context *ctx); int spu_acquire_exclusive(struct spu_context *ctx); -int spu_activate(struct spu_context *ctx, u64 flags); +enum { + SPU_ACTIVATE_NOWAKE = 1, +}; +int spu_activate(struct spu_context *ctx, unsigned long flags); void spu_deactivate(struct spu_context *ctx); void spu_yield(struct spu_context *ctx); int __init spu_sched_init(void); -- cgit v1.2.2 From 678b2ff1e65ecccdb15cbfe97081572fc35944b7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:25 +0100 Subject: [POWERPC] spu sched: simplity spu_remove_from_active_list If we call spu_remove_from_active_list that spu is always guaranteed to be on the active list and in runnable state, so we can simply do a list_del to remove it and unconditionally take the was_active codepath. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/sched.c | 44 +++++++++++-------------------- 1 file changed, 15 insertions(+), 29 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 07d0d095c62a..40202a752a7a 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -83,27 +83,14 @@ static void spu_add_to_active_list(struct spu *spu) /** * spu_remove_from_active_list - remove spu from active list * @spu: spu to remove from the active list - * - * This function removes an spu from the active list. If the spu was - * found on the active list the function returns 1, else it doesn't do - * anything and returns 0. */ -static int spu_remove_from_active_list(struct spu *spu) +static void spu_remove_from_active_list(struct spu *spu) { int node = spu->node; - struct spu *tmp; - int rc = 0; mutex_lock(&spu_prio->active_mutex[node]); - list_for_each_entry(tmp, &spu_prio->active_list[node], list) { - if (tmp == spu) { - list_del_init(&spu->list); - rc = 1; - break; - } - } + list_del_init(&spu->list); mutex_unlock(&spu_prio->active_mutex[node]); - return rc; } static inline void mm_needs_global_tlbie(struct mm_struct *mm) @@ -167,16 +154,13 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) * spu_unbind_context - unbind spu context from physical spu * @spu: physical spu to unbind from * @ctx: context to unbind - * - * If the spu was on the active list the function returns 1, else 0. */ -static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) +static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) { - int was_active = spu_remove_from_active_list(spu); - pr_debug("%s: unbind pid=%d SPU=%d NODE=%d\n", __FUNCTION__, spu->pid, spu->number, spu->node); + spu_remove_from_active_list(spu); spu_switch_notify(spu, NULL); spu_unmap_mappings(ctx); spu_save(&ctx->csa, spu); @@ -193,8 +177,6 @@ static int spu_unbind_context(struct spu *spu, struct spu_context *ctx) ctx->spu = NULL; spu->flags = 0; spu->ctx = NULL; - - return was_active; } /** @@ -340,17 +322,21 @@ int spu_activate(struct spu_context *ctx, unsigned long flags) return -ERESTARTSYS; } +/** + * spu_deactivate - unbind a context from it's physical spu + * @ctx: spu context to unbind + * + * Unbind @ctx from the physical spu it is running on and schedule + * the highest priority context to run on the freed physical spu. + */ void spu_deactivate(struct spu_context *ctx) { - struct spu *spu; - int was_active; + struct spu *spu = ctx->spu; - spu = ctx->spu; - if (!spu) - return; - was_active = spu_unbind_context(spu, ctx); - if (was_active) + if (spu) { + spu_unbind_context(spu, ctx); spu_reschedule(spu); + } } void spu_yield(struct spu_context *ctx) -- cgit v1.2.2 From ae7b4c5284d11d49ed9432c16505fcbeb8d3b8cf Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:26 +0100 Subject: [POWERPC] spu sched: update some comments Give spu_yield a kerneldoc comment and remove the old comment documenting spu_activate, spu_deactive and spu_yield as all of them now have descriptive kerneldoc comments of their own. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/sched.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 40202a752a7a..eb06a030ca09 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -281,14 +281,6 @@ static struct spu *spu_get_idle(struct spu_context *ctx) return spu; } -/* The three externally callable interfaces - * for the scheduler begin here. - * - * spu_activate - bind a context to SPU, waiting as needed. - * spu_deactivate - unbind a context from its SPU. - * spu_yield - yield an SPU if others are waiting. - */ - /** * spu_activate - find a free spu for a context and execute it * @ctx: spu context to schedule @@ -339,6 +331,14 @@ void spu_deactivate(struct spu_context *ctx) } } +/** + * spu_yield - yield a physical spu if others are waiting + * @ctx: spu context to yield + * + * Check if there is a higher priority context waiting and if yes + * unbind @ctx from the physical spu and schedule the highest + * priority context to run on the freed physical spu instead. + */ void spu_yield(struct spu_context *ctx) { struct spu *spu; -- cgit v1.2.2 From 52f04fcf66a5d5d90790d6cfde52e391ecf2b882 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:27 +0100 Subject: [POWERPC] spu sched: forced preemption at execution If we start a spu context with realtime priority we want it to run immediately and not wait until some other lower priority thread has finished. Try to find a suitable victim and use it's spu in this case. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 1 + arch/powerpc/platforms/cell/spufs/sched.c | 74 +++++++++++++++++++++++++++++ arch/powerpc/platforms/cell/spufs/spufs.h | 1 + 3 files changed, 76 insertions(+) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 056a8ad02385..d581f4ec99ba 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -53,6 +53,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) ctx->owner = get_task_mm(current); if (gang) spu_gang_add_ctx(gang, ctx); + ctx->rt_priority = current->rt_priority; ctx->prio = current->prio; goto out; out_free: diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index eb06a030ca09..814f65e025f1 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -281,6 +281,74 @@ static struct spu *spu_get_idle(struct spu_context *ctx) return spu; } +/** + * find_victim - find a lower priority context to preempt + * @ctx: canidate context for running + * + * Returns the freed physical spu to run the new context on. + */ +static struct spu *find_victim(struct spu_context *ctx) +{ + struct spu_context *victim = NULL; + struct spu *spu; + int node, n; + + /* + * Look for a possible preemption candidate on the local node first. + * If there is no candidate look at the other nodes. This isn't + * exactly fair, but so far the whole spu schedule tries to keep + * a strong node affinity. We might want to fine-tune this in + * the future. + */ + restart: + node = cpu_to_node(raw_smp_processor_id()); + for (n = 0; n < MAX_NUMNODES; n++, node++) { + node = (node < MAX_NUMNODES) ? node : 0; + if (!node_allowed(node)) + continue; + + mutex_lock(&spu_prio->active_mutex[node]); + list_for_each_entry(spu, &spu_prio->active_list[node], list) { + struct spu_context *tmp = spu->ctx; + + if (tmp->rt_priority < ctx->rt_priority && + (!victim || tmp->rt_priority < victim->rt_priority)) + victim = spu->ctx; + } + mutex_unlock(&spu_prio->active_mutex[node]); + + if (victim) { + /* + * This nests ctx->state_mutex, but we always lock + * higher priority contexts before lower priority + * ones, so this is safe until we introduce + * priority inheritance schemes. + */ + if (!mutex_trylock(&victim->state_mutex)) { + victim = NULL; + goto restart; + } + + spu = victim->spu; + if (!spu) { + /* + * This race can happen because we've dropped + * the active list mutex. No a problem, just + * restart the search. + */ + mutex_unlock(&victim->state_mutex); + victim = NULL; + goto restart; + } + spu_unbind_context(spu, victim); + mutex_unlock(&victim->state_mutex); + return spu; + } + } + + return NULL; +} + /** * spu_activate - find a free spu for a context and execute it * @ctx: spu context to schedule @@ -300,6 +368,12 @@ int spu_activate(struct spu_context *ctx, unsigned long flags) struct spu *spu; spu = spu_get_idle(ctx); + /* + * If this is a realtime thread we try to get it running by + * preempting a lower priority thread. + */ + if (!spu && ctx->rt_priority) + spu = find_victim(ctx); if (spu) { spu_bind_context(spu, ctx); return 0; diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 421f59167c55..85b182d16464 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -83,6 +83,7 @@ struct spu_context { /* scheduler fields */ struct list_head rq; unsigned long sched_flags; + unsigned long rt_priority; int prio; }; -- cgit v1.2.2 From 72cb360839f88c02ccf38f1df214316e05886ff3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:28 +0100 Subject: [POWERPC] spu sched: use DECLARE_BITMAP use DECLARE_BITMAP in the spu scheduler instead of reimplementing it. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/sched.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 814f65e025f1..ba4b01e01ace 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -46,9 +46,8 @@ #define SPU_MIN_TIMESLICE (100 * HZ / 1000) -#define SPU_BITMAP_SIZE (((MAX_PRIO+BITS_PER_LONG)/BITS_PER_LONG)+1) struct spu_prio_array { - unsigned long bitmap[SPU_BITMAP_SIZE]; + DECLARE_BITMAP(bitmap, MAX_PRIO); struct list_head runq[MAX_PRIO]; spinlock_t runq_lock; struct list_head active_list[MAX_NUMNODES]; -- cgit v1.2.2 From 2eb1b12049844a8ebc670e0e4fc908bc3f8933d3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 13 Feb 2007 21:54:29 +0100 Subject: [POWERPC] spu sched: static timeslicing for SCHED_RR contexts For SCHED_RR tasks we can do some really trivial timeslicing. Basically we fire up a time for every scheduler tick that searches for a higher or same priority thread that is on the runqueue and if there is one context switches to it. Because we can't lock spus from timer context we actually run this from a delayed runqueue instead of a timer. A nice optimization would be to skip the actual priority bitmap search when there are less contexts than physical spus available. To implement this I need a so far unpublished patch from Andre, and it will be added after we have that patch in. Note that right now we only do the time slicing for SCHED_RR tasks. The code would work for SCHED_OTHER tasks aswell, but their prio value is defered from the one the PPU thread has at time of spu_run, and using this for spu scheduling decisions would make the code very unfair. SCHED_OTHER support will be enabled once we the spu scheduler knows how to calculcate cpu_context.prio (very soon) Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/context.c | 2 ++ arch/powerpc/platforms/cell/spufs/run.c | 9 ++++-- arch/powerpc/platforms/cell/spufs/sched.c | 43 ++++++++++++++++++++++++++++- arch/powerpc/platforms/cell/spufs/spufs.h | 5 ++++ 4 files changed, 56 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index d581f4ec99ba..04ad2e364e97 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -54,7 +54,9 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) if (gang) spu_gang_add_ctx(gang, ctx); ctx->rt_priority = current->rt_priority; + ctx->policy = current->policy; ctx->prio = current->prio; + INIT_DELAYED_WORK(&ctx->sched_work, spu_sched_tick); goto out; out_free: kfree(ctx); diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index a973e79e9fdc..353a8fa07ab8 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -164,8 +164,10 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) (SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); if (runcntl == 0) runcntl = SPU_RUNCNTL_RUNNABLE; - } else + } else { + spu_start_tick(ctx); ctx->ops->npc_write(ctx, *npc); + } ctx->ops->runcntl_write(ctx, runcntl); return ret; @@ -176,6 +178,7 @@ static inline int spu_run_fini(struct spu_context *ctx, u32 * npc, { int ret = 0; + spu_stop_tick(ctx); *status = ctx->ops->status_read(ctx); *npc = ctx->ops->npc_read(ctx); spu_release(ctx); @@ -329,8 +332,10 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, } if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) { ret = spu_reacquire_runnable(ctx, npc, &status); - if (ret) + if (ret) { + spu_stop_tick(ctx); goto out2; + } continue; } ret = spu_process_events(ctx); diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index ba4b01e01ace..2f25e68b4bac 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -44,7 +44,7 @@ #include #include "spufs.h" -#define SPU_MIN_TIMESLICE (100 * HZ / 1000) +#define SPU_TIMESLICE (HZ) struct spu_prio_array { DECLARE_BITMAP(bitmap, MAX_PRIO); @@ -55,6 +55,7 @@ struct spu_prio_array { }; static struct spu_prio_array *spu_prio; +static struct workqueue_struct *spu_sched_wq; static inline int node_allowed(int node) { @@ -68,6 +69,40 @@ static inline int node_allowed(int node) return 1; } +void spu_start_tick(struct spu_context *ctx) +{ + if (ctx->policy == SCHED_RR) + queue_delayed_work(spu_sched_wq, &ctx->sched_work, SPU_TIMESLICE); +} + +void spu_stop_tick(struct spu_context *ctx) +{ + if (ctx->policy == SCHED_RR) + cancel_delayed_work(&ctx->sched_work); +} + +void spu_sched_tick(struct work_struct *work) +{ + struct spu_context *ctx = + container_of(work, struct spu_context, sched_work.work); + struct spu *spu; + int rearm = 1; + + mutex_lock(&ctx->state_mutex); + spu = ctx->spu; + if (spu) { + int best = sched_find_first_bit(spu_prio->bitmap); + if (best <= ctx->prio) { + spu_deactivate(ctx); + rearm = 0; + } + } + mutex_unlock(&ctx->state_mutex); + + if (rearm) + spu_start_tick(ctx); +} + /** * spu_add_to_active_list - add spu to active list * @spu: spu to add to the active list @@ -437,10 +472,15 @@ int __init spu_sched_init(void) { int i; + spu_sched_wq = create_singlethread_workqueue("spusched"); + if (!spu_sched_wq) + return 1; + spu_prio = kzalloc(sizeof(struct spu_prio_array), GFP_KERNEL); if (!spu_prio) { printk(KERN_WARNING "%s: Unable to allocate priority queue.\n", __FUNCTION__); + destroy_workqueue(spu_sched_wq); return 1; } for (i = 0; i < MAX_PRIO; i++) { @@ -471,4 +511,5 @@ void __exit spu_sched_exit(void) mutex_unlock(&spu_prio->active_mutex[node]); } kfree(spu_prio); + destroy_workqueue(spu_sched_wq); } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 85b182d16464..0c437891dfd5 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -82,8 +82,10 @@ struct spu_context { /* scheduler fields */ struct list_head rq; + struct delayed_work sched_work; unsigned long sched_flags; unsigned long rt_priority; + int policy; int prio; }; @@ -195,6 +197,9 @@ enum { int spu_activate(struct spu_context *ctx, unsigned long flags); void spu_deactivate(struct spu_context *ctx); void spu_yield(struct spu_context *ctx); +void spu_start_tick(struct spu_context *ctx); +void spu_stop_tick(struct spu_context *ctx); +void spu_sched_tick(struct work_struct *work); int __init spu_sched_init(void); void __exit spu_sched_exit(void); -- cgit v1.2.2 From 128b8546a83a9e37448bc126e1045dc1db291165 Mon Sep 17 00:00:00 2001 From: Masato Noguchi Date: Tue, 13 Feb 2007 21:54:30 +0100 Subject: [POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node I found an exploit in current kernel. Currently, there is no range check about mmapping "/mem" node in spufs. Thus, an application can access privilege memory region. In case this kernel already worked on a public server, I send this information only here. If there are such servers in somewhere, please replace it, ASAP. Signed-off-by: Masato Noguchi Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/spufs/file.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index c729813043a6..b00653d69c01 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -103,6 +103,9 @@ static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma, offset += vma->vm_pgoff << PAGE_SHIFT; + if (offset >= LS_SIZE) + return NOPFN_SIGBUS; + spu_acquire(ctx); if (ctx->state == SPU_STATE_SAVED) { -- cgit v1.2.2 From 73d605d1abbd70ef67b7660cf2ff177259960756 Mon Sep 17 00:00:00 2001 From: Kazunori MIYAZAWA Date: Tue, 13 Feb 2007 12:55:55 -0800 Subject: [IPSEC]: changing API of xfrm6_tunnel_register This patch changes xfrm6_tunnel register and deregister interface to prepare for solving the conflict of device tunnels with inter address family IPsec tunnel. There is no device which conflicts with IPv4 over IPv6 IPsec tunnel. Signed-off-by: Kazunori MIYAZAWA Signed-off-by: David S. Miller --- include/net/xfrm.h | 4 ++-- net/ipv6/ip6_tunnel.c | 6 +++--- net/ipv6/tunnel6.c | 43 +++++++++++++++++++++++++++++++++++++++---- net/ipv6/xfrm6_input.c | 3 ++- net/ipv6/xfrm6_tunnel.c | 19 ++++++++++++++++--- 5 files changed, 62 insertions(+), 13 deletions(-) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 20be8beb9a11..92a1fc46ea59 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -952,8 +952,8 @@ extern int xfrm6_rcv_spi(struct sk_buff *skb, __be32 spi); extern int xfrm6_rcv(struct sk_buff **pskb); extern int xfrm6_input_addr(struct sk_buff *skb, xfrm_address_t *daddr, xfrm_address_t *saddr, u8 proto); -extern int xfrm6_tunnel_register(struct xfrm6_tunnel *handler); -extern int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler); +extern int xfrm6_tunnel_register(struct xfrm6_tunnel *handler, unsigned short family); +extern int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler, unsigned short family); extern __be32 xfrm6_tunnel_alloc_spi(xfrm_address_t *saddr); extern void xfrm6_tunnel_free_spi(xfrm_address_t *saddr); extern __be32 xfrm6_tunnel_spi_lookup(xfrm_address_t *saddr); diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 367b74832986..662edb826899 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1128,7 +1128,7 @@ static int __init ip6_tunnel_init(void) { int err; - if (xfrm6_tunnel_register(&ip6ip6_handler)) { + if (xfrm6_tunnel_register(&ip6ip6_handler, AF_INET6)) { printk(KERN_ERR "ip6ip6 init: can't register tunnel\n"); return -EAGAIN; } @@ -1147,7 +1147,7 @@ static int __init ip6_tunnel_init(void) } return 0; fail: - xfrm6_tunnel_deregister(&ip6ip6_handler); + xfrm6_tunnel_deregister(&ip6ip6_handler, AF_INET6); return err; } @@ -1171,7 +1171,7 @@ static void __exit ip6ip6_destroy_tunnels(void) static void __exit ip6_tunnel_cleanup(void) { - if (xfrm6_tunnel_deregister(&ip6ip6_handler)) + if (xfrm6_tunnel_deregister(&ip6ip6_handler, AF_INET6)) printk(KERN_INFO "ip6ip6 close: can't deregister tunnel\n"); rtnl_lock(); diff --git a/net/ipv6/tunnel6.c b/net/ipv6/tunnel6.c index 918d07dd1219..23e2809878ae 100644 --- a/net/ipv6/tunnel6.c +++ b/net/ipv6/tunnel6.c @@ -30,9 +30,10 @@ #include static struct xfrm6_tunnel *tunnel6_handlers; +static struct xfrm6_tunnel *tunnel46_handlers; static DEFINE_MUTEX(tunnel6_mutex); -int xfrm6_tunnel_register(struct xfrm6_tunnel *handler) +int xfrm6_tunnel_register(struct xfrm6_tunnel *handler, unsigned short family) { struct xfrm6_tunnel **pprev; int ret = -EEXIST; @@ -40,7 +41,8 @@ int xfrm6_tunnel_register(struct xfrm6_tunnel *handler) mutex_lock(&tunnel6_mutex); - for (pprev = &tunnel6_handlers; *pprev; pprev = &(*pprev)->next) { + for (pprev = (family == AF_INET6) ? &tunnel6_handlers : &tunnel46_handlers; + *pprev; pprev = &(*pprev)->next) { if ((*pprev)->priority > priority) break; if ((*pprev)->priority == priority) @@ -60,14 +62,15 @@ err: EXPORT_SYMBOL(xfrm6_tunnel_register); -int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler) +int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler, unsigned short family) { struct xfrm6_tunnel **pprev; int ret = -ENOENT; mutex_lock(&tunnel6_mutex); - for (pprev = &tunnel6_handlers; *pprev; pprev = &(*pprev)->next) { + for (pprev = (family == AF_INET6) ? &tunnel6_handlers : &tunnel46_handlers; + *pprev; pprev = &(*pprev)->next) { if (*pprev == handler) { *pprev = handler->next; ret = 0; @@ -103,6 +106,25 @@ drop: return 0; } +static int tunnel46_rcv(struct sk_buff **pskb) +{ + struct sk_buff *skb = *pskb; + struct xfrm6_tunnel *handler; + + if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) + goto drop; + + for (handler = tunnel46_handlers; handler; handler = handler->next) + if (!handler->handler(skb)) + return 0; + + icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_PORT_UNREACH, 0, skb->dev); + +drop: + kfree_skb(skb); + return 0; +} + static void tunnel6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, int type, int code, int offset, __be32 info) { @@ -119,17 +141,30 @@ static struct inet6_protocol tunnel6_protocol = { .flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL, }; +static struct inet6_protocol tunnel46_protocol = { + .handler = tunnel46_rcv, + .err_handler = tunnel6_err, + .flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL, +}; + static int __init tunnel6_init(void) { if (inet6_add_protocol(&tunnel6_protocol, IPPROTO_IPV6)) { printk(KERN_ERR "tunnel6 init(): can't add protocol\n"); return -EAGAIN; } + if (inet6_add_protocol(&tunnel46_protocol, IPPROTO_IPIP)) { + printk(KERN_ERR "tunnel6 init(): can't add protocol\n"); + inet6_del_protocol(&tunnel6_protocol, IPPROTO_IPV6); + return -EAGAIN; + } return 0; } static void __exit tunnel6_fini(void) { + if (inet6_del_protocol(&tunnel46_protocol, IPPROTO_IPIP)) + printk(KERN_ERR "tunnel6 close: can't remove protocol\n"); if (inet6_del_protocol(&tunnel6_protocol, IPPROTO_IPV6)) printk(KERN_ERR "tunnel6 close: can't remove protocol\n"); } diff --git a/net/ipv6/xfrm6_input.c b/net/ipv6/xfrm6_input.c index 25250147bdc3..31f651f95096 100644 --- a/net/ipv6/xfrm6_input.c +++ b/net/ipv6/xfrm6_input.c @@ -40,7 +40,8 @@ int xfrm6_rcv_spi(struct sk_buff *skb, __be32 spi) if (xfrm_nr == XFRM_MAX_DEPTH) goto drop; - x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, nexthdr, AF_INET6); + x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, + nexthdr != IPPROTO_IPIP ? nexthdr : IPPROTO_IPV6, AF_INET6); if (x == NULL) goto drop; spin_lock(&x->lock); diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c index fb0228772f01..ee4b84a33ff4 100644 --- a/net/ipv6/xfrm6_tunnel.c +++ b/net/ipv6/xfrm6_tunnel.c @@ -339,17 +339,29 @@ static struct xfrm6_tunnel xfrm6_tunnel_handler = { .priority = 2, }; +static struct xfrm6_tunnel xfrm46_tunnel_handler = { + .handler = xfrm6_tunnel_rcv, + .err_handler = xfrm6_tunnel_err, + .priority = 2, +}; + static int __init xfrm6_tunnel_init(void) { if (xfrm_register_type(&xfrm6_tunnel_type, AF_INET6) < 0) return -EAGAIN; - if (xfrm6_tunnel_register(&xfrm6_tunnel_handler)) { + if (xfrm6_tunnel_register(&xfrm6_tunnel_handler, AF_INET6)) { + xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6); + return -EAGAIN; + } + if (xfrm6_tunnel_register(&xfrm46_tunnel_handler, AF_INET)) { + xfrm6_tunnel_deregister(&xfrm6_tunnel_handler, AF_INET6); xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6); return -EAGAIN; } if (xfrm6_tunnel_spi_init() < 0) { - xfrm6_tunnel_deregister(&xfrm6_tunnel_handler); + xfrm6_tunnel_deregister(&xfrm46_tunnel_handler, AF_INET); + xfrm6_tunnel_deregister(&xfrm6_tunnel_handler, AF_INET6); xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6); return -EAGAIN; } @@ -359,7 +371,8 @@ static int __init xfrm6_tunnel_init(void) static void __exit xfrm6_tunnel_fini(void) { xfrm6_tunnel_spi_fini(); - xfrm6_tunnel_deregister(&xfrm6_tunnel_handler); + xfrm6_tunnel_deregister(&xfrm46_tunnel_handler, AF_INET); + xfrm6_tunnel_deregister(&xfrm6_tunnel_handler, AF_INET6); xfrm_unregister_type(&xfrm6_tunnel_type, AF_INET6); } -- cgit v1.2.2 From 928ba4169dc1d82c83105831f5ddb5472379b440 Mon Sep 17 00:00:00 2001 From: Kazunori MIYAZAWA Date: Tue, 13 Feb 2007 12:57:16 -0800 Subject: [IPSEC]: Fix the address family to refer encap_family Fix the address family to refer encap_family when comparing with a kernel generated xfrm_state Signed-off-by: Kazunori MIYAZAWA Signed-off-by: David S. Miller --- net/xfrm/xfrm_policy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index c394b413f651..946b715db5ec 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1550,7 +1550,7 @@ xfrm_state_ok(struct xfrm_tmpl *tmpl, struct xfrm_state *x, unsigned short family) { if (xfrm_state_kern(x)) - return tmpl->optional && !xfrm_state_addr_cmp(tmpl, x, family); + return tmpl->optional && !xfrm_state_addr_cmp(tmpl, x, tmpl->encap_family); return x->id.proto == tmpl->id.proto && (x->id.spi == tmpl->id.spi || !tmpl->id.spi) && (x->props.reqid == tmpl->reqid || !tmpl->reqid) && -- cgit v1.2.2 From bcb63e25ed3c56ee40cca4d18fbaac1d2a40c1d6 Mon Sep 17 00:00:00 2001 From: Carl Love Date: Tue, 13 Feb 2007 22:02:02 +0100 Subject: [POWERPC] cell: PPU Oprofile cleanup patch This is a clean up patch that includes the following changes: -Some comments were added to clarify the code based on feedback from the community. -The write_pm_cntrl() and set_count_mode() were passed a structure element from a global variable. The argument was removed so the functions now just operate on the global directly. -The set_pm_event() function call in the cell_virtual_cntr() routine was moved to a for-loop before the for_each_cpu loop Signed-off-by: Carl Love Signed-off-by: Maynard Johnson Signed-off-by: Arnd Bergmann --- arch/powerpc/oprofile/op_model_cell.c | 104 ++++++++++++++++++++-------------- arch/powerpc/platforms/cell/pmu.c | 14 ++--- include/asm-powerpc/cell-pmu.h | 15 ++--- 3 files changed, 73 insertions(+), 60 deletions(-) diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 2eb15f388103..8d4a9586464d 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -41,8 +41,12 @@ #define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ #define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ -#define NUM_THREADS 2 -#define VIRT_CNTR_SW_TIME_NS 100000000 // 0.5 seconds +#define NUM_THREADS 2 /* number of physical threads in + * physical processor + */ +#define NUM_TRACE_BUS_WORDS 4 +#define NUM_INPUT_BUS_WORDS 2 + struct pmc_cntrl_data { unsigned long vcntr; @@ -93,7 +97,6 @@ static struct { u32 pm07_cntrl[NR_PHYS_CTRS]; } pm_regs; - #define GET_SUB_UNIT(x) ((x & 0x0000f000) >> 12) #define GET_BUS_WORD(x) ((x & 0x000000f0) >> 4) #define GET_BUS_TYPE(x) ((x & 0x00000300) >> 8) @@ -101,7 +104,6 @@ static struct { #define GET_COUNT_CYCLES(x) (x & 0x00000001) #define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2) - static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values); static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS]; @@ -129,8 +131,8 @@ static spinlock_t virt_cntr_lock = SPIN_LOCK_UNLOCKED; static u32 ctr_enabled; -static unsigned char trace_bus[4]; -static unsigned char input_bus[2]; +static unsigned char trace_bus[NUM_TRACE_BUS_WORDS]; +static unsigned char input_bus[NUM_INPUT_BUS_WORDS]; /* * Firmware interface functions @@ -183,7 +185,8 @@ static void pm_rtas_activate_signals(u32 node, u32 count) for (j = 0; j < count; j++) { /* fw expects physical cpu # */ pm_signal_local[j].cpu = node; - pm_signal_local[j].signal_group = pm_signal[j].signal_group; + pm_signal_local[j].signal_group + = pm_signal[j].signal_group; pm_signal_local[j].bus_word = pm_signal[j].bus_word; pm_signal_local[j].sub_unit = pm_signal[j].sub_unit; pm_signal_local[j].bit = pm_signal[j].bit; @@ -232,13 +235,21 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) p->signal_group = event / 100; p->bus_word = bus_word; - p->sub_unit = unit_mask & 0x0000f000; + p->sub_unit = (unit_mask & 0x0000f000) >> 12; pm_regs.pm07_cntrl[ctr] = 0; pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles); pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity); pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control); + /* Some of the islands signal selection is based on 64 bit words. + * The debug bus words are 32 bits, the input words to the performance + * counters are defined as 32 bits. Need to convert the 64 bit island + * specification to the appropriate 32 input bit and bus word for the + * performance counter event selection. See the CELL Performance + * monitoring signals manual and the Perf cntr hardware descriptions + * for the details. + */ if (input_control == 0) { if (signal_bit > 31) { signal_bit -= 32; @@ -259,12 +270,12 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) p->bit = signal_bit; } - for (i = 0; i < 4; i++) { + for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) { if (bus_word & (1 << i)) { pm_regs.debug_bus_control |= (bus_type << (31 - (2 * i) + 1)); - for (j = 0; j < 2; j++) { + for (j = 0; j < NUM_INPUT_BUS_WORDS; j++) { if (input_bus[j] == 0xff) { input_bus[j] = i; pm_regs.group_control |= @@ -278,52 +289,58 @@ out: ; } -static void write_pm_cntrl(int cpu, struct pm_cntrl *pm_cntrl) +static void write_pm_cntrl(int cpu) { - /* Oprofile will use 32 bit counters, set bits 7:10 to 0 */ + /* Oprofile will use 32 bit counters, set bits 7:10 to 0 + * pmregs.pm_cntrl is a global + */ + u32 val = 0; - if (pm_cntrl->enable == 1) + if (pm_regs.pm_cntrl.enable == 1) val |= CBE_PM_ENABLE_PERF_MON; - if (pm_cntrl->stop_at_max == 1) + if (pm_regs.pm_cntrl.stop_at_max == 1) val |= CBE_PM_STOP_AT_MAX; - if (pm_cntrl->trace_mode == 1) - val |= CBE_PM_TRACE_MODE_SET(pm_cntrl->trace_mode); + if (pm_regs.pm_cntrl.trace_mode == 1) + val |= CBE_PM_TRACE_MODE_SET(pm_regs.pm_cntrl.trace_mode); - if (pm_cntrl->freeze == 1) + if (pm_regs.pm_cntrl.freeze == 1) val |= CBE_PM_FREEZE_ALL_CTRS; /* Routine set_count_mode must be called previously to set * the count mode based on the user selection of user and kernel. */ - val |= CBE_PM_COUNT_MODE_SET(pm_cntrl->count_mode); + val |= CBE_PM_COUNT_MODE_SET(pm_regs.pm_cntrl.count_mode); cbe_write_pm(cpu, pm_control, val); } static inline void -set_count_mode(u32 kernel, u32 user, struct pm_cntrl *pm_cntrl) +set_count_mode(u32 kernel, u32 user) { /* The user must specify user and kernel if they want them. If - * neither is specified, OProfile will count in hypervisor mode + * neither is specified, OProfile will count in hypervisor mode. + * pm_regs.pm_cntrl is a global */ if (kernel) { if (user) - pm_cntrl->count_mode = CBE_COUNT_ALL_MODES; + pm_regs.pm_cntrl.count_mode = CBE_COUNT_ALL_MODES; else - pm_cntrl->count_mode = CBE_COUNT_SUPERVISOR_MODE; + pm_regs.pm_cntrl.count_mode = + CBE_COUNT_SUPERVISOR_MODE; } else { if (user) - pm_cntrl->count_mode = CBE_COUNT_PROBLEM_MODE; + pm_regs.pm_cntrl.count_mode = CBE_COUNT_PROBLEM_MODE; else - pm_cntrl->count_mode = CBE_COUNT_HYPERVISOR_MODE; + pm_regs.pm_cntrl.count_mode = + CBE_COUNT_HYPERVISOR_MODE; } } static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl) { - pm07_cntrl[ctr] |= PM07_CTR_ENABLE(1); + pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE; cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]); } @@ -365,6 +382,14 @@ static void cell_virtual_cntr(unsigned long data) hdw_thread = 1 ^ hdw_thread; next_hdw_thread = hdw_thread; + for (i = 0; i < num_counters; i++) + /* There are some per thread events. Must do the + * set event, for the thread that is being started + */ + set_pm_event(i, + pmc_cntrl[next_hdw_thread][i].evnts, + pmc_cntrl[next_hdw_thread][i].masks); + /* The following is done only once per each node, but * we need cpu #, not node #, to pass to the cbe_xxx functions. */ @@ -385,12 +410,13 @@ static void cell_virtual_cntr(unsigned long data) == 0xFFFFFFFF) /* If the cntr value is 0xffffffff, we must * reset that to 0xfffffff0 when the current - * thread is restarted. This will generate a new - * interrupt and make sure that we never restore - * the counters to the max value. If the counters - * were restored to the max value, they do not - * increment and no interrupts are generated. Hence - * no more samples will be collected on that cpu. + * thread is restarted. This will generate a + * new interrupt and make sure that we never + * restore the counters to the max value. If + * the counters were restored to the max value, + * they do not increment and no interrupts are + * generated. Hence no more samples will be + * collected on that cpu. */ cbe_write_ctr(cpu, i, 0xFFFFFFF0); else @@ -410,9 +436,6 @@ static void cell_virtual_cntr(unsigned long data) * Must do the set event, enable_cntr * for each cpu. */ - set_pm_event(i, - pmc_cntrl[next_hdw_thread][i].evnts, - pmc_cntrl[next_hdw_thread][i].masks); enable_ctr(cpu, i, pm_regs.pm07_cntrl); } else { @@ -465,8 +488,7 @@ cell_reg_setup(struct op_counter_config *ctr, pm_regs.pm_cntrl.trace_mode = 0; pm_regs.pm_cntrl.freeze = 1; - set_count_mode(sys->enable_kernel, sys->enable_user, - &pm_regs.pm_cntrl); + set_count_mode(sys->enable_kernel, sys->enable_user); /* Setup the thread 0 events */ for (i = 0; i < num_ctrs; ++i) { @@ -498,10 +520,10 @@ cell_reg_setup(struct op_counter_config *ctr, pmc_cntrl[1][i].vcntr = i; } - for (i = 0; i < 4; i++) + for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) trace_bus[i] = 0xff; - for (i = 0; i < 2; i++) + for (i = 0; i < NUM_INPUT_BUS_WORDS; i++) input_bus[i] = 0xff; /* Our counters count up, and "count" refers to @@ -560,7 +582,7 @@ static void cell_cpu_setup(struct op_counter_config *cntr) cbe_write_pm(cpu, pm_start_stop, 0); cbe_write_pm(cpu, group_control, pm_regs.group_control); cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control); - write_pm_cntrl(cpu, &pm_regs.pm_cntrl); + write_pm_cntrl(cpu); for (i = 0; i < num_counters; ++i) { if (ctr_enabled & (1 << i)) { @@ -602,7 +624,7 @@ static void cell_global_start(struct op_counter_config *ctr) } } - cbe_clear_pm_interrupts(cpu); + cbe_get_and_clear_pm_interrupts(cpu); cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask); cbe_enable_pm(cpu); } @@ -672,7 +694,7 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) cbe_disable_pm(cpu); - interrupt_mask = cbe_clear_pm_interrupts(cpu); + interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu); /* If the interrupt mask has been cleared, then the virt cntr * has cleared the interrupt. When the thread that generated diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index d04ae1671e6c..66ca4b5a1dbc 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -345,18 +345,12 @@ EXPORT_SYMBOL_GPL(cbe_read_trace_buffer); * Enabling/disabling interrupts for the entire performance monitoring unit. */ -u32 cbe_query_pm_interrupts(u32 cpu) -{ - return cbe_read_pm(cpu, pm_status); -} -EXPORT_SYMBOL_GPL(cbe_query_pm_interrupts); - -u32 cbe_clear_pm_interrupts(u32 cpu) +u32 cbe_get_and_clear_pm_interrupts(u32 cpu) { /* Reading pm_status clears the interrupt bits. */ - return cbe_query_pm_interrupts(cpu); + return cbe_read_pm(cpu, pm_status); } -EXPORT_SYMBOL_GPL(cbe_clear_pm_interrupts); +EXPORT_SYMBOL_GPL(cbe_get_and_clear_pm_interrupts); void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask) { @@ -371,7 +365,7 @@ EXPORT_SYMBOL_GPL(cbe_enable_pm_interrupts); void cbe_disable_pm_interrupts(u32 cpu) { - cbe_clear_pm_interrupts(cpu); + cbe_get_and_clear_pm_interrupts(cpu); cbe_write_pm(cpu, pm_status, 0); } EXPORT_SYMBOL_GPL(cbe_disable_pm_interrupts); diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h index e8c2ebd3ddda..35b95773746c 100644 --- a/include/asm-powerpc/cell-pmu.h +++ b/include/asm-powerpc/cell-pmu.h @@ -53,6 +53,11 @@ #define CBE_PM_CTR_POLARITY 0x01000000 #define CBE_PM_CTR_COUNT_CYCLES 0x00800000 #define CBE_PM_CTR_ENABLE 0x00400000 +#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26) +#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25) +#define PM07_CTR_POLARITY(x) (((x) & 1) << 24) +#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23) +#define PM07_CTR_ENABLE(x) (((x) & 1) << 22) /* Macros for the pm_status register. */ #define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7))) @@ -89,8 +94,7 @@ extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); extern void cbe_disable_pm_interrupts(u32 cpu); -extern u32 cbe_query_pm_interrupts(u32 cpu); -extern u32 cbe_clear_pm_interrupts(u32 cpu); +extern u32 cbe_get_and_clear_pm_interrupts(u32 cpu); extern void cbe_sync_irq(int node); /* Utility functions, macros */ @@ -103,11 +107,4 @@ extern u32 cbe_get_hw_thread_id(int cpu); #define CBE_COUNT_PROBLEM_MODE 2 #define CBE_COUNT_ALL_MODES 3 -/* Macros for the pm07_control registers. */ -#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26) -#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25) -#define PM07_CTR_POLARITY(x) (((x) & 1) << 24) -#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23) -#define PM07_CTR_ENABLE(x) (((x) & 1) << 22) - #endif /* __ASM_CELL_PMU_H__ */ -- cgit v1.2.2 From c7eb734766217b9ddac217cbccae3aedcfa67520 Mon Sep 17 00:00:00 2001 From: Maynard Johnson Date: Tue, 13 Feb 2007 22:02:03 +0100 Subject: [POWERPC] cell: pm_rtas_activat_signals routine cleanup The code was setting up the debug bus for group 21 when profiling on the event PPU CYCLES. The debug bus is not actually used by the hardware performance counters when counting PPU CYCLES. Setting up the debug bus for PPU CYCLES causes signal routing conflicts on the debug bus when profiling PPU cycles and another PPU event. This patch fixes the code to only setup the debug bus to route the performance signals for the non PPU CYCLE events. Signed-off-by: Maynard Johnson Signed-off-by: Carl Love Signed-off-by: Arnd Bergmann --- arch/powerpc/oprofile/op_model_cell.c | 49 +++++++++++++++++++++++------------ 1 file changed, 33 insertions(+), 16 deletions(-) diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 8d4a9586464d..e08e1d7b3dc5 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -39,6 +39,9 @@ #include "../platforms/cell/interrupt.h" #define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ +#define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying + * PPU_CYCLES event + */ #define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ #define NUM_THREADS 2 /* number of physical threads in @@ -62,7 +65,7 @@ struct pmc_cntrl_data { struct pm_signal { u16 cpu; /* Processor to modify */ u16 sub_unit; /* hw subunit this applies to (if applicable) */ - u16 signal_group; /* Signal Group to Enable/Disable */ + short int signal_group; /* Signal Group to Enable/Disable */ u8 bus_word; /* Enable/Disable on this Trace/Trigger/Event * Bus Word(s) (bitmask) */ @@ -179,26 +182,40 @@ static void pm_rtas_reset_signals(u32 node) static void pm_rtas_activate_signals(u32 node, u32 count) { int ret; - int j; + int i, j; struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + /* There is no debug setup required for the cycles event. + * Note that only events in the same group can be used. + * Otherwise, there will be conflicts in correctly routing + * the signals on the debug bus. It is the responsiblity + * of the OProfile user tool to check the events are in + * the same group. + */ + i = 0; for (j = 0; j < count; j++) { - /* fw expects physical cpu # */ - pm_signal_local[j].cpu = node; - pm_signal_local[j].signal_group - = pm_signal[j].signal_group; - pm_signal_local[j].bus_word = pm_signal[j].bus_word; - pm_signal_local[j].sub_unit = pm_signal[j].sub_unit; - pm_signal_local[j].bit = pm_signal[j].bit; + if (pm_signal[j].signal_group != PPU_CYCLES_GRP_NUM) { + + /* fw expects physical cpu # */ + pm_signal_local[i].cpu = node; + pm_signal_local[i].signal_group + = pm_signal[j].signal_group; + pm_signal_local[i].bus_word = pm_signal[j].bus_word; + pm_signal_local[i].sub_unit = pm_signal[j].sub_unit; + pm_signal_local[i].bit = pm_signal[j].bit; + i++; + } } - ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, - pm_signal_local, - count * sizeof(struct pm_signal)); + if (i != 0) { + ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, + pm_signal_local, + i * sizeof(struct pm_signal)); - if (ret) - printk(KERN_WARNING "%s: rtas returned: %d\n", - __FUNCTION__, ret); + if (ret) + printk(KERN_WARNING "%s: rtas returned: %d\n", + __FUNCTION__, ret); + } } /* @@ -215,7 +232,7 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) /* Special Event: Count all cpu cycles */ pm_regs.pm07_cntrl[ctr] = CBE_COUNT_ALL_CYCLES; p = &(pm_signal[ctr]); - p->signal_group = 21; + p->signal_group = PPU_CYCLES_GRP_NUM; p->bus_word = 1; p->sub_unit = 0; p->bit = 0; -- cgit v1.2.2 From 69735698312f6f5e47001cf62dc678f591b6a6de Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:08:57 +0100 Subject: i2c-ali1563: Improve the status messages Improve the status messages printed by the i2c-ali1563 driver. Signed-off-by: Jean Delvare Cc: Rudolf Marek --- drivers/i2c/busses/i2c-ali1563.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 8e1e3f8e40a4..3b0e79b1e871 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -328,7 +328,6 @@ static int __devinit ali1563_setup(struct pci_dev * dev) u16 ctrl; pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); - printk("ali1563: SMBus control = %04x\n",ctrl); /* Check if device is even enabled first */ if (!(ctrl & ALI1563_SMB_IOEN)) { @@ -353,9 +352,11 @@ static int __devinit ali1563_setup(struct pci_dev * dev) } if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, ali1563_pci_driver.name)) { - dev_warn(&dev->dev,"Could not allocate I/O space"); + dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n", + ali1563_smba); goto Err; } + dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba); return 0; Err: @@ -384,13 +385,18 @@ static int __devinit ali1563_probe(struct pci_dev * dev, int error; if ((error = ali1563_setup(dev))) - return error; + goto exit; ali1563_adapter.dev.parent = &dev->dev; sprintf(ali1563_adapter.name,"SMBus ALi 1563 Adapter @ %04x", ali1563_smba); if ((error = i2c_add_adapter(&ali1563_adapter))) - ali1563_shutdown(dev); - printk("%s: Returning %d\n",__FUNCTION__,error); + goto exit_shutdown; + return 0; + +exit_shutdown: + ali1563_shutdown(dev); +exit: + dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error); return error; } -- cgit v1.2.2 From 849be516c57501ec4729bde51babc25a7b073b65 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:08:57 +0100 Subject: i2c-ali1563: Fix device initialization The i2c-ali1563 initialization looks quite broken to me: * If the I/O space isn't enabled, we forcibly set 3 bits in the PCI configuration space instead of just the one enabling the I/O space. * After that we pretend to check if the write worked, but we don't actually read the new value from the register. * It's probably not a good idea to enable the I/O space if no base address has been set. So I propose the following changes to that part of the driver: * Merge ali1563_enable() into ali1563_setup(). * Check the base address before the I/O space enabled bit. Signed-off-by: Jean Delvare Acked-by: Rudolf Marek --- drivers/i2c/busses/i2c-ali1563.c | 41 ++++++++++++++++++---------------------- 1 file changed, 18 insertions(+), 23 deletions(-) diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 3b0e79b1e871..55ebbef41e97 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -314,35 +314,12 @@ static u32 ali1563_func(struct i2c_adapter * a) } -static void ali1563_enable(struct pci_dev * dev) -{ - u16 ctrl; - - pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); - ctrl |= 0x7; - pci_write_config_word(dev,ALI1563_SMBBA,ctrl); -} - static int __devinit ali1563_setup(struct pci_dev * dev) { u16 ctrl; pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); - /* Check if device is even enabled first */ - if (!(ctrl & ALI1563_SMB_IOEN)) { - dev_warn(&dev->dev,"I/O space not enabled, trying manually\n"); - ali1563_enable(dev); - } - if (!(ctrl & ALI1563_SMB_IOEN)) { - dev_warn(&dev->dev,"I/O space still not enabled, giving up\n"); - goto Err; - } - if (!(ctrl & ALI1563_SMB_HOSTEN)) { - dev_warn(&dev->dev,"Host Controller not enabled\n"); - goto Err; - } - /* SMB I/O Base in high 12 bits and must be aligned with the * size of the I/O space. */ ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1); @@ -350,6 +327,24 @@ static int __devinit ali1563_setup(struct pci_dev * dev) dev_warn(&dev->dev,"ali1563_smba Uninitialized\n"); goto Err; } + + /* Check if device is enabled */ + if (!(ctrl & ALI1563_SMB_HOSTEN)) { + dev_warn(&dev->dev, "Host Controller not enabled\n"); + goto Err; + } + if (!(ctrl & ALI1563_SMB_IOEN)) { + dev_warn(&dev->dev, "I/O space not enabled, trying manually\n"); + pci_write_config_word(dev, ALI1563_SMBBA, + ctrl | ALI1563_SMB_IOEN); + pci_read_config_word(dev, ALI1563_SMBBA, &ctrl); + if (!(ctrl & ALI1563_SMB_IOEN)) { + dev_err(&dev->dev, "I/O space still not enabled, " + "giving up\n"); + goto Err; + } + } + if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, ali1563_pci_driver.name)) { dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n", -- cgit v1.2.2 From bbeaeef73a0b0a5c43ad2657b61857167d914a55 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Feb 2007 22:08:58 +0100 Subject: i2c/vt8231: Remove superfluous initialization Remove a superfluous initialization from the vt8231 hwmon driver; the i2c core does this, and the source field will be vanishing soon. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- drivers/hwmon/vt8231.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 93f93d4fb8ae..a6a4aa0eee16 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -727,7 +727,6 @@ int vt8231_detect(struct i2c_adapter *adapter) client->addr = isa_address; client->adapter = adapter; client->driver = &vt8231_driver; - client->dev.parent = &adapter->dev; /* Fill in the remaining client fields and put into the global list */ strlcpy(client->name, "vt8231", I2C_NAME_SIZE); -- cgit v1.2.2 From 4ef0ce90df3763e277b5307fb580ff1cdaaad7b2 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:08:58 +0100 Subject: i2c-nforce2: Drop unused reference to pci_dev Signed-off-by: Jean Delvare Cc: Hans-Frieder Vogt --- drivers/i2c/busses/i2c-nforce2.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index ad37c10e7fec..69d073049e14 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -57,7 +57,6 @@ MODULE_DESCRIPTION("nForce2/3/4/5xx SMBus driver"); struct nforce2_smbus { - struct pci_dev *dev; struct i2c_adapter adapter; int base; int size; @@ -230,7 +229,6 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK; smbus->size = 64; } - smbus->dev = dev; if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", -- cgit v1.2.2 From 4e6697fcc194db8b45559a9863947c6cbfeea363 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:08:59 +0100 Subject: i2c-piix4: Add support for the ATI SB600 Add support for the ATI SB600 SMBus controller. Signed-off-by: Jean Delvare --- Documentation/i2c/busses/i2c-piix4 | 2 +- drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-piix4.c | 3 +++ include/linux/pci_ids.h | 1 + 4 files changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index 921476333235..7cbe43fa2701 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -6,7 +6,7 @@ Supported adapters: Datasheet: Publicly available at the Intel website * ServerWorks OSB4, CSB5, CSB6 and HT-1000 southbridges Datasheet: Only available via NDA from ServerWorks - * ATI IXP southbridges IXP200, IXP300, IXP400 + * ATI IXP200, IXP300, IXP400 and SB600 southbridges Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge Datasheet: Publicly available at the SMSC website http://www.smsc.com diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 9367c4cfe936..f2894dec51a5 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -183,6 +183,7 @@ config I2C_PIIX4 ATI IXP200 ATI IXP300 ATI IXP400 + ATI SB600 Serverworks OSB4 Serverworks CSB5 Serverworks CSB6 diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 30c7a1b38cbd..07546c2b2404 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -23,6 +23,7 @@ Supports: Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000 + ATI IXP200, IXP300, IXP400, SB600 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface. @@ -396,6 +397,8 @@ static struct pci_device_id piix4_ids[] = { .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS), .driver_data = 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SMBUS), + .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4), .driver_data = 0 }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5), diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 8fb9c3e06eef..182a96f77c84 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -369,6 +369,7 @@ #define PCI_DEVICE_ID_ATI_IXP400_SATA2 0x437a #define PCI_DEVICE_ID_ATI_IXP600_SATA 0x4380 #define PCI_DEVICE_ID_ATI_IXP600_SRAID 0x4381 +#define PCI_DEVICE_ID_ATI_IXP600_SMBUS 0x4385 #define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c #define PCI_VENDOR_ID_VLSI 0x1004 -- cgit v1.2.2 From 3f9a4790a3818af1228c7fb4286afd66f3201fd0 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 13 Feb 2007 22:08:59 +0100 Subject: i2c: Fix typo in SMBus Write Word Data description Write data, don't read it. Signed-off-by: Mike Frysinger Signed-off-by: Jean Delvare --- Documentation/i2c/smbus-protocol | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol index 09f5e5ca4927..8a653c60d25a 100644 --- a/Documentation/i2c/smbus-protocol +++ b/Documentation/i2c/smbus-protocol @@ -97,7 +97,7 @@ SMBus Write Word Data ===================== This is the opposite operation of the Read Word Data command. 16 bits -of data is read from a device, from a designated register that is +of data is written to a device, to the designated register that is specified through the Comm byte. S Addr Wr [A] Comm [A] DataLow [A] DataHigh [A] P -- cgit v1.2.2 From fcdd96ecaf04fb4f229ac1a64fe77fda890dffd5 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:08:59 +0100 Subject: i2c-i801: Spelling fix Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-i801.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index ae625b854470..de5e23a93b18 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -123,7 +123,7 @@ static int i801_transaction(void) dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp); return -1; } else { - dev_dbg(&I801_dev->dev, "Successfull!\n"); + dev_dbg(&I801_dev->dev, "Successful!\n"); } } -- cgit v1.2.2 From 099ab118b6b194ad43865f62776a0d36d4b1c7d2 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:00 +0100 Subject: i2c-i801: Document the SMBus unhiding quirk This is a frequently asked question so it deserves a paragraph in the driver documentation. Signed-off-by: Jean Delvare --- Documentation/i2c/busses/i2c-i801 | 60 +++++++++++++++++++++++++++++++++++---- 1 file changed, 55 insertions(+), 5 deletions(-) diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 3db69a086c41..c34f0db78a30 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -48,14 +48,9 @@ following: The SMBus controller is function 3 in device 1f. Class 0c05 is SMBus Serial Controller. -If you do NOT see the 24x3 device at function 3, and you can't figure out -any way in the BIOS to enable it, - The ICH chips are quite similar to Intel's PIIX4 chip, at least in the SMBus controller. -See the file i2c-piix4 for some additional information. - Process Call Support -------------------- @@ -74,6 +69,61 @@ SMBus 2.0 Support The 82801DB (ICH4) and later chips support several SMBus 2.0 features. + +Hidden ICH SMBus +---------------- + +If your system has an Intel ICH south bridge, but you do NOT see the +SMBus device at 00:1f.3 in lspci, and you can't figure out any way in the +BIOS to enable it, it means it has been hidden by the BIOS code. Asus is +well known for first doing this on their P4B motherboard, and many other +boards after that. Some vendor machines are affected as well. + +The first thing to try is the "i2c_ec" ACPI driver. It could be that the +SMBus was hidden on purpose because it'll be driven by ACPI. If the +i2c_ec driver works for you, just forget about the i2c-i801 driver and +don't try to unhide the ICH SMBus. Even if i2c_ec doesn't work, you +better make sure that the SMBus isn't used by the ACPI code. Try loading +the "fan" and "thermal" drivers, and check in /proc/acpi/fan and +/proc/acpi/thermal_zone. If you find anything there, it's likely that +the ACPI is accessing the SMBus and it's safer not to unhide it. Only +once you are certain that ACPI isn't using the SMBus, you can attempt +to unhide it. + +In order to unhide the SMBus, we need to change the value of a PCI +register before the kernel enumerates the PCI devices. This is done in +drivers/pci/quirks.c, where all affected boards must be listed (see +function asus_hides_smbus_hostbridge.) If the SMBus device is missing, +and you think there's something interesting on the SMBus (e.g. a +hardware monitoring chip), you need to add your board to the list. + +The motherboard is identified using the subvendor and subdevice IDs of the +host bridge PCI device. Get yours with "lspci -n -v -s 00:00.0": + +00:00.0 Class 0600: 8086:2570 (rev 02) + Subsystem: 1043:80f2 + Flags: bus master, fast devsel, latency 0 + Memory at fc000000 (32-bit, prefetchable) [size=32M] + Capabilities: [e4] #09 [2106] + Capabilities: [a0] AGP version 3.0 + +Here the host bridge ID is 2570 (82865G/PE/P), the subvendor ID is 1043 +(Asus) and the subdevice ID is 80f2 (P4P800-X). You can find the symbolic +names for the bridge ID and the subvendor ID in include/linux/pci_ids.h, +and then add a case for your subdevice ID at the right place in +drivers/pci/quirks.c. Then please give it very good testing, to make sure +that the unhidden SMBus doesn't conflict with e.g. ACPI. + +If it works, proves useful (i.e. there are usable chips on the SMBus) +and seems safe, please submit a patch for inclusion into the kernel. + +Note: There's a useful script in lm_sensors 2.10.2 and later, named +unhide_ICH_SMBus (in prog/hotplug), which uses the fakephp driver to +temporarily unhide the SMBus without having to patch and recompile your +kernel. It's very convenient if you just want to check if there's +anything interesting on your hidden ICH SMBus. + + ********************** The lm_sensors project gratefully acknowledges the support of Texas Instruments in the initial development of this driver. -- cgit v1.2.2 From b8d6f45b32f6fe72bf7304183275e99332544ce1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:00 +0100 Subject: i2c: completion header cleanups i2c-core and i2c-isa use completions without including . Fix it. i2c-powermac includes but doesn't use any completion. Fix it. Signed-off-by: Jean Delvare Acked-by: Benjamin Herrenschmidt Cc: David Brownell --- drivers/i2c/busses/i2c-isa.c | 1 + drivers/i2c/busses/i2c-powermac.c | 1 - drivers/i2c/i2c-core.c | 1 + 3 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c index 8ed59a2dff53..5f33bc9c1e02 100644 --- a/drivers/i2c/busses/i2c-isa.c +++ b/drivers/i2c/busses/i2c-isa.c @@ -39,6 +39,7 @@ #include #include #include +#include static u32 isa_func(struct i2c_adapter *adapter); diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 648d55533d87..1425d2245c82 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index b05378a3d673..60f6eb194046 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -32,6 +32,7 @@ #include #include #include +#include #include -- cgit v1.2.2 From f37dd80ac2a67e4e4e921f99d34a1ceeb2488abb Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 13 Feb 2007 22:09:00 +0100 Subject: i2c: Add driver suspend/resume/shutdown support Driver model updates for the I2C core: - Add new suspend(), resume(), and shutdown() methods. Use them in the standard driver model style; document them. - Minor doc updates to highlight zero-initialized fields in drivers, and the driver model accessors for "clientdata". If any i2c drivers were previously using the old suspend/resume calls in "struct driver", they were getting warning messages ... and will now no longer work. Other than that, this patch changes no behaviors; and it lets I2C drivers use conventional PM and shutdown support. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- Documentation/i2c/porting-clients | 6 ++++ Documentation/i2c/writing-clients | 58 ++++++++++++++++++++++++++++------ drivers/i2c/i2c-core.c | 65 ++++++++++++++++++++++++++------------- include/linux/i2c.h | 7 ++++- 4 files changed, 105 insertions(+), 31 deletions(-) diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients index f03c2a02f806..ca272b263a92 100644 --- a/Documentation/i2c/porting-clients +++ b/Documentation/i2c/porting-clients @@ -129,6 +129,12 @@ Technical changes: structure, those name member should be initialized to a driver name string. i2c_driver itself has no name member anymore. +* [Driver model] Instead of shutdown or reboot notifiers, provide a + shutdown() method in your driver. + +* [Power management] Use the driver model suspend() and resume() + callbacks instead of the obsolete pm_register() calls. + Coding policy: * [Copyright] Use (C), not (c), for copyright. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 3a057c8e5507..fbcff96f4ca1 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -21,20 +21,26 @@ The driver structure Usually, you will implement a single driver structure, and instantiate all clients from it. Remember, a driver structure contains general access -routines, a client structure specific information like the actual I2C -address. +routines, and should be zero-initialized except for fields with data you +provide. A client structure holds device-specific information like the +driver model device node, and its I2C address. static struct i2c_driver foo_driver = { .driver = { .name = "foo", }, - .attach_adapter = &foo_attach_adapter, - .detach_client = &foo_detach_client, - .command = &foo_command /* may be NULL */ + .attach_adapter = foo_attach_adapter, + .detach_client = foo_detach_client, + .shutdown = foo_shutdown, /* optional */ + .suspend = foo_suspend, /* optional */ + .resume = foo_resume, /* optional */ + .command = foo_command, /* optional */ } -The name field must match the driver name, including the case. It must not -contain spaces, and may be up to 31 characters long. +The name field is the driver name, and must not contain spaces. It +should match the module name (if the driver can be compiled as a module), +although you can use MODULE_ALIAS (passing "foo" in this example) to add +another name for the module. All other fields are for call-back functions which will be explained below. @@ -43,11 +49,18 @@ below. Extra client data ================= -The client structure has a special `data' field that can point to any -structure at all. You can use this to keep client-specific data. You +Each client structure has a special `data' field that can point to any +structure at all. You should use this to keep device-specific data, +especially in drivers that handle multiple I2C or SMBUS devices. You do not always need this, but especially for `sensors' drivers, it can be very useful. + /* store the value */ + void i2c_set_clientdata(struct i2c_client *client, void *data); + + /* retrieve the value */ + void *i2c_get_clientdata(struct i2c_client *client); + An example structure is below. struct foo_data { @@ -493,6 +506,33 @@ by `__init_data'. Hose functions and structures can be removed after kernel booting (or module loading) is completed. +Power Management +================ + +If your I2C device needs special handling when entering a system low +power state -- like putting a transceiver into a low power mode, or +activating a system wakeup mechanism -- do that in the suspend() method. +The resume() method should reverse what the suspend() method does. + +These are standard driver model calls, and they work just like they +would for any other driver stack. The calls can sleep, and can use +I2C messaging to the device being suspended or resumed (since their +parent I2C adapter is active when these calls are issued, and IRQs +are still enabled). + + +System Shutdown +=============== + +If your I2C device needs special handling when the system shuts down +or reboots (including kexec) -- like turning something off -- use a +shutdown() method. + +Again, this is a standard driver model call, working just like it +would for any other driver stack: the calls can sleep, and can use +I2C messaging. + + Command function ================ diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 60f6eb194046..9653f7f81561 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -41,49 +41,72 @@ static LIST_HEAD(drivers); static DEFINE_MUTEX(core_lists); static DEFINE_IDR(i2c_adapter_idr); + +/* ------------------------------------------------------------------------- */ + /* match always succeeds, as we want the probe() to tell if we really accept this match */ static int i2c_device_match(struct device *dev, struct device_driver *drv) { return 1; } -static int i2c_bus_suspend(struct device * dev, pm_message_t state) +static int i2c_device_probe(struct device *dev) { - int rc = 0; + return -ENODEV; +} - if (dev->driver && dev->driver->suspend) - rc = dev->driver->suspend(dev, state); - return rc; +static int i2c_device_remove(struct device *dev) +{ + return 0; } -static int i2c_bus_resume(struct device * dev) +static void i2c_device_shutdown(struct device *dev) { - int rc = 0; - - if (dev->driver && dev->driver->resume) - rc = dev->driver->resume(dev); - return rc; + struct i2c_driver *driver; + + if (!dev->driver) + return; + driver = to_i2c_driver(dev->driver); + if (driver->shutdown) + driver->shutdown(to_i2c_client(dev)); } -static int i2c_device_probe(struct device *dev) +static int i2c_device_suspend(struct device * dev, pm_message_t mesg) { - return -ENODEV; + struct i2c_driver *driver; + + if (!dev->driver) + return 0; + driver = to_i2c_driver(dev->driver); + if (!driver->suspend) + return 0; + return driver->suspend(to_i2c_client(dev), mesg); } -static int i2c_device_remove(struct device *dev) +static int i2c_device_resume(struct device * dev) { - return 0; + struct i2c_driver *driver; + + if (!dev->driver) + return 0; + driver = to_i2c_driver(dev->driver); + if (!driver->resume) + return 0; + return driver->resume(to_i2c_client(dev)); } struct bus_type i2c_bus_type = { - .name = "i2c", - .match = i2c_device_match, - .probe = i2c_device_probe, - .remove = i2c_device_remove, - .suspend = i2c_bus_suspend, - .resume = i2c_bus_resume, + .name = "i2c", + .match = i2c_device_match, + .probe = i2c_device_probe, + .remove = i2c_device_remove, + .shutdown = i2c_device_shutdown, + .suspend = i2c_device_suspend, + .resume = i2c_device_resume, }; +/* ------------------------------------------------------------------------- */ + void i2c_adapter_dev_release(struct device *dev) { struct i2c_adapter *adap = dev_to_i2c_adapter(dev); diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 71e50d3e492f..9428092017e3 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -125,7 +125,12 @@ struct i2c_driver { * it must be freed here. */ int (*detach_client)(struct i2c_client *); - + + /* driver model interfaces that don't relate to enumeration */ + void (*shutdown)(struct i2c_client *); + int (*suspend)(struct i2c_client *, pm_message_t mesg); + int (*resume)(struct i2c_client *); + /* a ioctl like command that can be used to perform specific functions * with the device. */ -- cgit v1.2.2 From a394ae15427f215b43fca21f3c9370b0e63ba252 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:01 +0100 Subject: i2c: Update the list of bus IDs * The Voodoo3 has no SMBus, it has two bit-banged busses which already have an ID assigned (I2C_HW_B_VOO). * The i2c-ipmi bus driver was a non-sense, it'll never be ported to Linux 2.6. Signed-off-by: Jean Delvare Acked-by: Yani Ioannou --- include/linux/i2c-id.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 6e7ec4c76178..b65c1c9da894 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -232,7 +232,6 @@ #define I2C_HW_SMBUS_PIIX4 0x040000 #define I2C_HW_SMBUS_ALI15X3 0x040001 #define I2C_HW_SMBUS_VIA2 0x040002 -#define I2C_HW_SMBUS_VOODOO3 0x040003 #define I2C_HW_SMBUS_I801 0x040004 #define I2C_HW_SMBUS_AMD756 0x040005 #define I2C_HW_SMBUS_SIS5595 0x040006 @@ -252,9 +251,6 @@ /* --- ISA pseudo-adapter */ #define I2C_HW_ISA 0x050000 -/* --- IPMI pseudo-adapter */ -#define I2C_HW_IPMI 0x0b0000 - /* --- IPMB adapter */ #define I2C_HW_IPMB 0x0c0000 -- cgit v1.2.2 From 9ace555d7d87c55ceab6999be444c9a17e0e79b4 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 13 Feb 2007 22:09:01 +0100 Subject: i2c: Add IDs to adapters IDs have been defined but not used by most of the I2C adapters. By having a unique ID, clients can check for correct connection during probe. Signed-off-by: Stephen Hemminger Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ali1535.c | 1 + drivers/i2c/busses/i2c-ali1563.c | 1 + drivers/i2c/busses/i2c-ali15x3.c | 1 + drivers/i2c/busses/i2c-amd756.c | 1 + drivers/i2c/busses/i2c-amd8111.c | 1 + drivers/i2c/busses/i2c-i801.c | 1 + drivers/i2c/busses/i2c-i810.c | 2 ++ drivers/i2c/busses/i2c-nforce2.c | 1 + drivers/i2c/busses/i2c-piix4.c | 1 + drivers/i2c/busses/i2c-savage4.c | 1 + drivers/i2c/busses/i2c-sis5595.c | 1 + drivers/i2c/busses/i2c-sis630.c | 1 + drivers/i2c/busses/i2c-sis96x.c | 1 + drivers/i2c/busses/i2c-via.c | 1 + drivers/i2c/busses/i2c-viapro.c | 1 + drivers/i2c/busses/i2c-voodoo3.c | 2 ++ drivers/i2c/busses/scx200_i2c.c | 1 + include/linux/i2c-id.h | 1 + 18 files changed, 20 insertions(+) diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index e75d339a3481..0b0a87b8d107 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -475,6 +475,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali1535_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_ALI1535, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 55ebbef41e97..6b68074e518a 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -370,6 +370,7 @@ static const struct i2c_algorithm ali1563_algorithm = { static struct i2c_adapter ali1563_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_ALI1563, .class = I2C_CLASS_HWMON, .algo = &ali1563_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 3f11b6e1a341..c537441ac038 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -470,6 +470,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_ALI15X3, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 2d21afdc5b1c..91fbc0ee439c 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -301,6 +301,7 @@ static const struct i2c_algorithm smbus_algorithm = { struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_AMD756, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 0fbc7186c91a..21f8a822bb79 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -351,6 +351,7 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ smbus->adapter.owner = THIS_MODULE; snprintf(smbus->adapter.name, I2C_NAME_SIZE, "SMBus2 AMD8111 adapter at %04x", smbus->base); + smbus->adapter.id = I2C_HW_SMBUS_AMD8111; smbus->adapter.class = I2C_CLASS_HWMON; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index de5e23a93b18..8c3569a9775b 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -442,6 +442,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter i801_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_I801, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c index 10c98bc88aa6..42e8d94c276f 100644 --- a/drivers/i2c/busses/i2c-i810.c +++ b/drivers/i2c/busses/i2c-i810.c @@ -171,6 +171,7 @@ static struct i2c_algo_bit_data i810_i2c_bit_data = { static struct i2c_adapter i810_i2c_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_I810, .name = "I810/I815 I2C Adapter", .algo_data = &i810_i2c_bit_data, }; @@ -186,6 +187,7 @@ static struct i2c_algo_bit_data i810_ddc_bit_data = { static struct i2c_adapter i810_ddc_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_I810, .name = "I810/I815 DDC Adapter", .algo_data = &i810_ddc_bit_data, }; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 69d073049e14..653555184a64 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -236,6 +236,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, return -1; } smbus->adapter.owner = THIS_MODULE; + smbus->adapter.id = I2C_HW_SMBUS_NFORCE2; smbus->adapter.class = I2C_CLASS_HWMON; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 07546c2b2404..03d0aeea0189 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -384,6 +384,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_PIIX4, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c index 844b4ff90893..b7fb65c30112 100644 --- a/drivers/i2c/busses/i2c-savage4.c +++ b/drivers/i2c/busses/i2c-savage4.c @@ -145,6 +145,7 @@ static struct i2c_algo_bit_data sav_i2c_bit_data = { static struct i2c_adapter savage4_i2c_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_SAVAGE, .name = "I2C Savage4 adapter", .algo_data = &sav_i2c_bit_data, }; diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 38bbfd840b6b..d333babe4ad3 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -365,6 +365,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_SIS5595, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index dec0bafb52ab..172bacf932a6 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -457,6 +457,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_SIS630, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 7fd07fbac336..869a635d37e9 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -249,6 +249,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_SIS96X, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 15d7e00e47e6..bbcc62151f7c 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -86,6 +86,7 @@ static struct i2c_algo_bit_data bit_data = { static struct i2c_adapter vt586b_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_VIA, .class = I2C_CLASS_HWMON, .name = "VIA i2c", .algo_data = &bit_data, diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index efc6bbf0cc0a..43a081f16553 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -306,6 +306,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter vt596_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_SMBUS_VIA2, .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index b0377b81744b..88a3447e11e1 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -165,6 +165,7 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = { static struct i2c_adapter voodoo3_i2c_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_VOO, .class = I2C_CLASS_TV_ANALOG, .name = "I2C Voodoo3/Banshee adapter", .algo_data = &voo_i2c_bit_data, @@ -181,6 +182,7 @@ static struct i2c_algo_bit_data voo_ddc_bit_data = { static struct i2c_adapter voodoo3_ddc_adapter = { .owner = THIS_MODULE, + .id = I2C_HW_B_VOO, .class = I2C_CLASS_DDC, .name = "DDC Voodoo3/Banshee adapter", .algo_data = &voo_ddc_bit_data, diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index 6cd96e43aa72..c3022a023449 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -81,6 +81,7 @@ static struct i2c_algo_bit_data scx200_i2c_data = { static struct i2c_adapter scx200_i2c_ops = { .owner = THIS_MODULE, + .id = I2C_HW_B_SCX200, .algo_data = &scx200_i2c_data, .name = "NatSemi SCx200 I2C", }; diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index b65c1c9da894..9c21dc793d7b 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -247,6 +247,7 @@ #define I2C_HW_SMBUS_OV519 0x040010 /* OV519 USB 1.1 webcam IC */ #define I2C_HW_SMBUS_OVFX2 0x040011 /* Cypress/OmniVision FX2 webcam */ #define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */ +#define I2C_HW_SMBUS_ALI1563 0x040013 /* --- ISA pseudo-adapter */ #define I2C_HW_ISA 0x050000 -- cgit v1.2.2 From ab6a6ed271c757b429ddc68f5b93a41f9592ab8b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:02 +0100 Subject: i2c-viapro: Add support for the VIA CX700 south bridge We do not have any documentation for the CX700, but it was reported to work fine. Thanks to Claas Langbehn for testing. Signed-off-by: Jean Delvare --- Documentation/i2c/busses/i2c-viapro | 7 +++++++ drivers/i2c/busses/Kconfig | 5 +++-- drivers/i2c/busses/i2c-viapro.c | 6 +++++- 3 files changed, 15 insertions(+), 3 deletions(-) diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 25680346e0ac..775f489e86f6 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -13,6 +13,9 @@ Supported adapters: * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8251 Datasheet: available on request and under NDA from VIA + * VIA Technologies, Inc. CX700 + Datasheet: available on request and under NDA from VIA + Authors: Kyösti Mälkki , Mark D. Studebaker , @@ -44,6 +47,7 @@ Your lspci -n listing must show one of these : device 1106:3227 (VT8237R) device 1106:3337 (VT8237A) device 1106:3287 (VT8251) + device 1106:8324 (CX700) If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. @@ -51,3 +55,6 @@ enable ACPI / SMBus or even USB. Except for the oldest chips (VT82C596A/B, VT82C686A and most probably VT8231), this driver supports I2C block transactions. Such transactions are mainly useful to read from and write to EEPROMs. + +The CX700 additionally appears to support SMBus PEC, although this driver +doesn't implement it yet. diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index f2894dec51a5..25d52e0eec2c 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -500,11 +500,11 @@ config I2C_VIA will be called i2c-via. config I2C_VIAPRO - tristate "VIA 82C596/82C686/82xx" + tristate "VIA VT82C596/82C686/82xx and CX700" depends on I2C && PCI help If you say yes to this option, support will be included for the VIA - 82C596/82C686/82xx I2C interfaces. Specifically, the following + VT82C596 and later SMBus interface. Specifically, the following chipsets are supported: VT82C596A/B VT82C686A/B @@ -513,6 +513,7 @@ config I2C_VIAPRO VT8235 VT8237R/A VT8251 + CX700 This driver can also be built as a module. If so, the module will be called i2c-viapro. diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 43a081f16553..03c5fc868548 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -4,7 +4,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard , Philip Edelbrock , Kyösti Mälkki , Mark D. Studebaker - Copyright (C) 2005 Jean Delvare + Copyright (C) 2005 - 2007 Jean Delvare This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -36,6 +36,7 @@ VT8237R 0x3227 yes VT8237A 0x3337 yes VT8251 0x3287 yes + CX700 0x8324 yes Note: we assume there can only be one device, with one SMBus interface. */ @@ -384,6 +385,7 @@ found: dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); switch (pdev->device) { + case PCI_DEVICE_ID_VIA_CX700: case PCI_DEVICE_ID_VIA_8251: case PCI_DEVICE_ID_VIA_8237: case PCI_DEVICE_ID_VIA_8237A: @@ -443,6 +445,8 @@ static struct pci_device_id vt596_ids[] = { .driver_data = SMBBA1 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251), .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700), + .driver_data = SMBBA3 }, { 0, } }; -- cgit v1.2.2 From 55249cf750e4d9be19c7f8afd502c9ca42de8858 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Tue, 13 Feb 2007 22:09:02 +0100 Subject: i2c-parport: Add support for One For All remote JP1 interface This simple patch adds support to i2c-parport for the One For All remote JP1 parallel port interfaces which can be found detailed at: http://www.hifi-remote.com/jp1/hardware.shtml These allow access to the internal configuration EEPROM on various remote controls and there are a variety of Windows tools that make use of this hardware. I have tested this patch with the "simple" parallel port device and a One For All URC-7562 and confirmed that the data read using the eeprom i2c driver matches that returned by the Windows "IR" JP1 tool. Signed-off-by: Jonathan McDowell Signed-off-by: Jean Delvare --- Documentation/i2c/busses/i2c-parport | 15 +++++++++++++++ drivers/i2c/busses/i2c-parport.h | 8 ++++++++ 2 files changed, 23 insertions(+) diff --git a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport index 77b995dfca22..dceaba1ad930 100644 --- a/Documentation/i2c/busses/i2c-parport +++ b/Documentation/i2c/busses/i2c-parport @@ -19,6 +19,7 @@ It currently supports the following devices: * (type=4) Analog Devices ADM1032 evaluation board * (type=5) Analog Devices evaluation boards: ADM1025, ADM1030, ADM1031 * (type=6) Barco LPT->DVI (K5800236) adapter + * (type=7) One For All JP1 parallel port adapter These devices use different pinout configurations, so you have to tell the driver what you have, using the type module parameter. There is no @@ -157,3 +158,17 @@ many more, using /dev/velleman. http://home.wanadoo.nl/hihihi/libk8005.htm http://struyve.mine.nu:8080/index.php?block=k8000 http://sourceforge.net/projects/libk8005/ + + +One For All JP1 parallel port adapter +------------------------------------- + +The JP1 project revolves around a set of remote controls which expose +the I2C bus their internal configuration EEPROM lives on via a 6 pin +jumper in the battery compartment. More details can be found at: + +http://www.hifi-remote.com/jp1/ + +Details of the simple parallel port hardware can be found at: + +http://www.hifi-remote.com/jp1/hardware.shtml diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h index 9ddd816d5d0f..ed69d846cb95 100644 --- a/drivers/i2c/busses/i2c-parport.h +++ b/drivers/i2c/busses/i2c-parport.h @@ -88,6 +88,13 @@ static struct adapter_parm adapter_parm[] = { .getscl = { 0x40, STAT, 0 }, .init = { 0xfc, DATA, 0 }, }, + /* type 7: One For All JP1 parallel port adapter */ + { + .setsda = { 0x01, DATA, 0 }, + .setscl = { 0x02, DATA, 0 }, + .getsda = { 0x80, STAT, 1 }, + .init = { 0x04, DATA, 1 }, + }, }; static int type = -1; @@ -101,4 +108,5 @@ MODULE_PARM_DESC(type, " 4 = ADM1032 evaluation board\n" " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n" " 6 = Barco LPT->DVI (K5800236) adapter\n" + " 7 = One For All JP1 parallel port adapter\n" ); -- cgit v1.2.2 From 88b9e750e974febd9128fc622109c526a9d22c10 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:02 +0100 Subject: i2c-amd8111: Proposed cleanups Proposed cleanups to the i2c-amd8111 SMBus driver: * Fold long lines. * Add an explicit mask when writing the low byte of a word. * Use I2C_SMBUS_BLOCK_MAX instead of hardcoding 32. * Discard extra blank lines. * Use boolean not instead of bitwise not for bit tests, it's clearer. * Return -EBUSY rather than -1 on I/O resource conflict. * Fix a race on device registration, initialization should be done before the bus is registered. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-amd8111.c | 70 ++++++++++++++++++++++++---------------- 1 file changed, 42 insertions(+), 28 deletions(-) diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 21f8a822bb79..14ad9912f204 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -76,7 +76,8 @@ static unsigned int amd_ec_wait_write(struct amd_smbus *smbus) udelay(1); if (!timeout) { - dev_warn(&smbus->dev->dev, "Timeout while waiting for IBF to clear\n"); + dev_warn(&smbus->dev->dev, + "Timeout while waiting for IBF to clear\n"); return -1; } @@ -91,14 +92,16 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus) udelay(1); if (!timeout) { - dev_warn(&smbus->dev->dev, "Timeout while waiting for OBF to set\n"); + dev_warn(&smbus->dev->dev, + "Timeout while waiting for OBF to set\n"); return -1; } return 0; } -static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data) +static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, + unsigned char *data) { if (amd_ec_wait_write(smbus)) return -1; @@ -115,7 +118,8 @@ static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, return 0; } -static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data) +static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, + unsigned char data) { if (amd_ec_wait_write(smbus)) return -1; @@ -175,18 +179,19 @@ static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, #define AMD_SMB_PRTCL_PEC 0x80 -static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, - char read_write, u8 command, int size, union i2c_smbus_data * data) +static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, u8 command, int size, + union i2c_smbus_data * data) { struct amd_smbus *smbus = adap->algo_data; unsigned char protocol, len, pec, temp[2]; int i; - protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ : AMD_SMB_PRTCL_WRITE; + protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ + : AMD_SMB_PRTCL_WRITE; pec = (flags & I2C_CLIENT_PEC) ? AMD_SMB_PRTCL_PEC : 0; switch (size) { - case I2C_SMBUS_QUICK: protocol |= AMD_SMB_PRTCL_QUICK; read_write = I2C_SMBUS_WRITE; @@ -208,8 +213,10 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl case I2C_SMBUS_WORD_DATA: amd_ec_write(smbus, AMD_SMB_CMD, command); if (read_write == I2C_SMBUS_WRITE) { - amd_ec_write(smbus, AMD_SMB_DATA, data->word); - amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); + amd_ec_write(smbus, AMD_SMB_DATA, + data->word & 0xff); + amd_ec_write(smbus, AMD_SMB_DATA + 1, + data->word >> 8); } protocol |= AMD_SMB_PRTCL_WORD_DATA | pec; break; @@ -217,27 +224,31 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl case I2C_SMBUS_BLOCK_DATA: amd_ec_write(smbus, AMD_SMB_CMD, command); if (read_write == I2C_SMBUS_WRITE) { - len = min_t(u8, data->block[0], 32); + len = min_t(u8, data->block[0], + I2C_SMBUS_BLOCK_MAX); amd_ec_write(smbus, AMD_SMB_BCNT, len); for (i = 0; i < len; i++) - amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + amd_ec_write(smbus, AMD_SMB_DATA + i, + data->block[i + 1]); } protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec; break; case I2C_SMBUS_I2C_BLOCK_DATA: - len = min_t(u8, data->block[0], 32); + len = min_t(u8, data->block[0], + I2C_SMBUS_BLOCK_MAX); amd_ec_write(smbus, AMD_SMB_CMD, command); amd_ec_write(smbus, AMD_SMB_BCNT, len); if (read_write == I2C_SMBUS_WRITE) for (i = 0; i < len; i++) - amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + amd_ec_write(smbus, AMD_SMB_DATA + i, + data->block[i + 1]); protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA; break; case I2C_SMBUS_PROC_CALL: amd_ec_write(smbus, AMD_SMB_CMD, command); - amd_ec_write(smbus, AMD_SMB_DATA, data->word); + amd_ec_write(smbus, AMD_SMB_DATA, data->word & 0xff); amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); protocol = AMD_SMB_PRTCL_PROC_CALL | pec; read_write = I2C_SMBUS_READ; @@ -248,7 +259,8 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl amd_ec_write(smbus, AMD_SMB_CMD, command); amd_ec_write(smbus, AMD_SMB_BCNT, len); for (i = 0; i < len; i++) - amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + amd_ec_write(smbus, AMD_SMB_DATA + i, + data->block[i + 1]); protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec; read_write = I2C_SMBUS_READ; break; @@ -280,7 +292,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl return 0; switch (size) { - case I2C_SMBUS_BYTE: case I2C_SMBUS_BYTE_DATA: amd_ec_read(smbus, AMD_SMB_DATA, &data->byte); @@ -296,10 +307,11 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_BLOCK_PROC_CALL: amd_ec_read(smbus, AMD_SMB_BCNT, &len); - len = min_t(u8, len, 32); + len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX); case I2C_SMBUS_I2C_BLOCK_DATA: for (i = 0; i < len; i++) - amd_ec_read(smbus, AMD_SMB_DATA + i, data->block + i + 1); + amd_ec_read(smbus, AMD_SMB_DATA + i, + data->block + i + 1); data->block[0] = len; break; } @@ -310,7 +322,8 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl static u32 amd8111_func(struct i2c_adapter *adapter) { - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC; @@ -329,12 +342,13 @@ static struct pci_device_id amd8111_ids[] = { MODULE_DEVICE_TABLE (pci, amd8111_ids); -static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_id *id) +static int __devinit amd8111_probe(struct pci_dev *dev, + const struct pci_device_id *id) { struct amd_smbus *smbus; - int error = -ENODEV; + int error; - if (~pci_resource_flags(dev, 0) & IORESOURCE_IO) + if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO)) return -ENODEV; smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL); @@ -345,8 +359,10 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ smbus->base = pci_resource_start(dev, 0); smbus->size = pci_resource_len(dev, 0); - if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) + if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) { + error = -EBUSY; goto out_kfree; + } smbus->adapter.owner = THIS_MODULE; snprintf(smbus->adapter.name, I2C_NAME_SIZE, @@ -359,11 +375,11 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ /* set up the driverfs linkage to our parent device */ smbus->adapter.dev.parent = &dev->dev; + pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0); error = i2c_add_adapter(&smbus->adapter); if (error) goto out_release_region; - pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0); pci_set_drvdata(dev, smbus); return 0; @@ -371,10 +387,9 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_ release_region(smbus->base, smbus->size); out_kfree: kfree(smbus); - return -1; + return error; } - static void __devexit amd8111_remove(struct pci_dev *dev) { struct amd_smbus *smbus = pci_get_drvdata(dev); @@ -396,7 +411,6 @@ static int __init i2c_amd8111_init(void) return pci_register_driver(&amd8111_driver); } - static void __exit i2c_amd8111_exit(void) { pci_unregister_driver(&amd8111_driver); -- cgit v1.2.2 From beb58aa39e6e5a52875defe12c7697b0bfa95d4c Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 13 Feb 2007 22:09:03 +0100 Subject: i2c: PA Semi SMBus driver New driver for the PA Semi SMBus interfaces. Signed-off-by: Olof Johansson Signed-off-by: Jean Delvare --- MAINTAINERS | 6 + drivers/i2c/busses/Kconfig | 7 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-pasemi.c | 426 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 440 insertions(+) create mode 100644 drivers/i2c/busses/i2c-pasemi.c diff --git a/MAINTAINERS b/MAINTAINERS index f85c603b02a3..93a338daedd8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2523,6 +2523,12 @@ M: olof@lixom.net L: netdev@vger.kernel.org S: Maintained +PA SEMI SMBUS DRIVER +P: Olof Johansson +M: olof@lixom.net +L: i2c@lm-sensors.org +S: Maintained + PARALLEL PORT SUPPORT P: Phil Blundell M: philb@gnu.org diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 25d52e0eec2c..4d44a2db29dd 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -342,6 +342,13 @@ config I2C_PARPORT_LIGHT This support is also available as a module. If so, the module will be called i2c-parport-light. +config I2C_PASEMI + tristate "PA Semi SMBus interface" +# depends on PPC_PASEMI && I2C && PCI + depends on I2C && PCI + help + Supports the PA Semi PWRficient on-chip SMBus interfaces. + config I2C_PROSAVAGE tristate "S3/VIA (Pro)Savage" depends on I2C && PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 37196c1d0794..03505aa44bbf 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o +obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c new file mode 100644 index 000000000000..f54fb5d65cc4 --- /dev/null +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -0,0 +1,426 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * SMBus host driver for PA Semi PWRficient + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct pci_driver pasemi_smb_driver; + +struct pasemi_smbus { + struct pci_dev *dev; + struct i2c_adapter adapter; + unsigned long base; + int size; +}; + +/* Register offsets */ +#define REG_MTXFIFO 0x00 +#define REG_MRXFIFO 0x04 +#define REG_SMSTA 0x14 +#define REG_CTL 0x1c + +/* Register defs */ +#define MTXFIFO_READ 0x00000400 +#define MTXFIFO_STOP 0x00000200 +#define MTXFIFO_START 0x00000100 +#define MTXFIFO_DATA_M 0x000000ff + +#define MRXFIFO_EMPTY 0x00000100 +#define MRXFIFO_DATA_M 0x000000ff + +#define SMSTA_XEN 0x08000000 + +#define CTL_MRR 0x00000400 +#define CTL_MTR 0x00000200 +#define CTL_CLK_M 0x000000ff + +#define CLK_100K_DIV 84 +#define CLK_400K_DIV 21 + +static inline void reg_write(struct pasemi_smbus *smbus, int reg, int val) +{ + dev_dbg(&smbus->dev->dev, "smbus write reg %lx val %08x\n", + smbus->base + reg, val); + outl(val, smbus->base + reg); +} + +static inline int reg_read(struct pasemi_smbus *smbus, int reg) +{ + int ret; + ret = inl(smbus->base + reg); + dev_dbg(&smbus->dev->dev, "smbus read reg %lx val %08x\n", + smbus->base + reg, ret); + return ret; +} + +#define TXFIFO_WR(smbus, reg) reg_write((smbus), REG_MTXFIFO, (reg)) +#define RXFIFO_RD(smbus) reg_read((smbus), REG_MRXFIFO) + +static void pasemi_smb_clear(struct pasemi_smbus *smbus) +{ + unsigned int status; + + status = reg_read(smbus, REG_SMSTA); + reg_write(smbus, REG_SMSTA, status); +} + +static unsigned int pasemi_smb_waitready(struct pasemi_smbus *smbus) +{ + int timeout = 10; + unsigned int status; + + status = reg_read(smbus, REG_SMSTA); + + while (!(status & SMSTA_XEN) && timeout--) { + msleep(1); + status = reg_read(smbus, REG_SMSTA); + } + + if (timeout < 0) { + dev_warn(&smbus->dev->dev, "Timeout, status 0x%08x\n", status); + reg_write(smbus, REG_SMSTA, status); + return -ETIME; + } + + /* Clear XEN */ + reg_write(smbus, REG_SMSTA, SMSTA_XEN); + + return 0; +} + +static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter, + struct i2c_msg *msg, int stop) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + int read, i, err; + u32 rd; + + read = msg->flags & I2C_M_RD ? 1 : 0; + + TXFIFO_WR(smbus, MTXFIFO_START | (msg->addr << 1) | read); + + if (read) { + TXFIFO_WR(smbus, msg->len | MTXFIFO_READ | + (stop ? MTXFIFO_STOP : 0)); + + err = pasemi_smb_waitready(smbus); + if (err) + goto reset_out; + + for (i = 0; i < msg->len; i++) { + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + msg->buf[i] = rd & MRXFIFO_DATA_M; + } + } else { + for (i = 0; i < msg->len - 1; i++) + TXFIFO_WR(smbus, msg->buf[i]); + + TXFIFO_WR(smbus, msg->buf[msg->len] | + (stop ? MTXFIFO_STOP : 0)); + } + + return 0; + + reset_out: + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + return err; +} + +static int pasemi_i2c_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, int num) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + int ret, i; + + pasemi_smb_clear(smbus); + + ret = 0; + + for (i = 0; i < num && !ret; i++) + ret = pasemi_i2c_xfer_msg(adapter, &msgs[i], (i == (num - 1))); + + return ret ? ret : num; +} + +static int pasemi_smb_xfer(struct i2c_adapter *adapter, + u16 addr, unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) +{ + struct pasemi_smbus *smbus = adapter->algo_data; + unsigned int rd; + int read_flag, err; + int len = 0, i; + + /* All our ops take 8-bit shifted addresses */ + addr <<= 1; + read_flag = read_write == I2C_SMBUS_READ; + + pasemi_smb_clear(smbus); + + switch (size) { + case I2C_SMBUS_QUICK: + TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START | + MTXFIFO_STOP); + break; + case I2C_SMBUS_BYTE: + TXFIFO_WR(smbus, addr | read_flag | MTXFIFO_START); + if (read_write) + TXFIFO_WR(smbus, 1 | MTXFIFO_STOP | MTXFIFO_READ); + else + TXFIFO_WR(smbus, MTXFIFO_STOP | command); + break; + case I2C_SMBUS_BYTE_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 1 | MTXFIFO_READ | MTXFIFO_STOP); + } else { + TXFIFO_WR(smbus, MTXFIFO_STOP | data->byte); + } + break; + case I2C_SMBUS_WORD_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 2 | MTXFIFO_READ | MTXFIFO_STOP); + } else { + TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, MTXFIFO_STOP | (data->word >> 8)); + } + break; + case I2C_SMBUS_BLOCK_DATA: + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + if (read_write) { + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 1 | MTXFIFO_READ); + rd = RXFIFO_RD(smbus); + len = min_t(u8, (rd & MRXFIFO_DATA_M), + I2C_SMBUS_BLOCK_MAX); + TXFIFO_WR(smbus, (len + 1) | MTXFIFO_READ | + MTXFIFO_STOP); + } else { + len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX); + TXFIFO_WR(smbus, len); + for (i = 1; i < len; i++) + TXFIFO_WR(smbus, data->block[i]); + TXFIFO_WR(smbus, data->block[len] | MTXFIFO_STOP); + } + break; + case I2C_SMBUS_PROC_CALL: + read_write = I2C_SMBUS_READ; + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + TXFIFO_WR(smbus, data->word & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, (data->word >> 8) & MTXFIFO_DATA_M); + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ | MTXFIFO_START); + TXFIFO_WR(smbus, 2 | MTXFIFO_STOP | MTXFIFO_READ); + break; + case I2C_SMBUS_BLOCK_PROC_CALL: + len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX - 1); + read_write = I2C_SMBUS_READ; + TXFIFO_WR(smbus, addr | MTXFIFO_START); + TXFIFO_WR(smbus, command); + TXFIFO_WR(smbus, len); + for (i = 1; i <= len; i++) + TXFIFO_WR(smbus, data->block[i]); + TXFIFO_WR(smbus, addr | I2C_SMBUS_READ); + TXFIFO_WR(smbus, MTXFIFO_READ | 1); + rd = RXFIFO_RD(smbus); + len = min_t(u8, (rd & MRXFIFO_DATA_M), + I2C_SMBUS_BLOCK_MAX - len); + TXFIFO_WR(smbus, (len + 1) | MTXFIFO_READ | MTXFIFO_STOP); + break; + + default: + dev_warn(&adapter->dev, "Unsupported transaction %d\n", size); + return -EINVAL; + } + + err = pasemi_smb_waitready(smbus); + if (err) + goto reset_out; + + if (read_write == I2C_SMBUS_WRITE) + return 0; + + switch (size) { + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->byte = rd & MRXFIFO_DATA_M; + break; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->word = rd & MRXFIFO_DATA_M; + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->word |= (rd & MRXFIFO_DATA_M) << 8; + break; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + data->block[0] = len; + for (i = 1; i <= len; i ++) { + rd = RXFIFO_RD(smbus); + if (rd & MRXFIFO_EMPTY) { + err = -ENODATA; + goto reset_out; + } + data->block[i] = rd & MRXFIFO_DATA_M; + } + break; + } + + return 0; + + reset_out: + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + return err; +} + +static u32 pasemi_smb_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_I2C; +} + +static const struct i2c_algorithm smbus_algorithm = { + .master_xfer = pasemi_i2c_xfer, + .smbus_xfer = pasemi_smb_xfer, + .functionality = pasemi_smb_func, +}; + +static int __devinit pasemi_smb_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct pasemi_smbus *smbus; + int error; + + if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO)) + return -ENODEV; + + smbus = kzalloc(sizeof(struct pasemi_smbus), GFP_KERNEL); + if (!smbus) + return -ENOMEM; + + smbus->dev = dev; + smbus->base = pci_resource_start(dev, 0); + smbus->size = pci_resource_len(dev, 0); + + if (!request_region(smbus->base, smbus->size, + pasemi_smb_driver.name)) { + error = -EBUSY; + goto out_kfree; + } + + smbus->adapter.owner = THIS_MODULE; + snprintf(smbus->adapter.name, I2C_NAME_SIZE, + "PA Semi SMBus adapter at 0x%lx", smbus->base); + smbus->adapter.class = I2C_CLASS_HWMON; + smbus->adapter.algo = &smbus_algorithm; + smbus->adapter.algo_data = smbus; + + /* set up the driverfs linkage to our parent device */ + smbus->adapter.dev.parent = &dev->dev; + + reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR | + (CLK_100K_DIV & CTL_CLK_M))); + + error = i2c_add_adapter(&smbus->adapter); + if (error) + goto out_release_region; + + pci_set_drvdata(dev, smbus); + + return 0; + + out_release_region: + release_region(smbus->base, smbus->size); + out_kfree: + kfree(smbus); + return error; +} + +static void __devexit pasemi_smb_remove(struct pci_dev *dev) +{ + struct pasemi_smbus *smbus = pci_get_drvdata(dev); + + i2c_del_adapter(&smbus->adapter); + release_region(smbus->base, smbus->size); + kfree(smbus); +} + +static struct pci_device_id pasemi_smb_ids[] = { + { PCI_DEVICE(0x1959, 0xa003) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, pasemi_smb_ids); + +static struct pci_driver pasemi_smb_driver = { + .name = "i2c-pasemi", + .id_table = pasemi_smb_ids, + .probe = pasemi_smb_probe, + .remove = __devexit_p(pasemi_smb_remove), +}; + +static int __init pasemi_smb_init(void) +{ + return pci_register_driver(&pasemi_smb_driver); +} + +static void __exit pasemi_smb_exit(void) +{ + pci_unregister_driver(&pasemi_smb_driver); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR ("Olof Johansson "); +MODULE_DESCRIPTION("PA Semi PWRficient SMBus driver"); + +module_init(pasemi_smb_init); +module_exit(pasemi_smb_exit); -- cgit v1.2.2 From 12a917f69d1468c91d646dbad8408dd0d39d6207 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:03 +0100 Subject: i2c: Declare more i2c_adapter parent devices Declare the parent device of i2c_adapter devices each time we can easily do so. It makes the i2c_adapter appear at the right place in the device tree, rather than as a platform device. Signed-off-by: Jean Delvare Cc: David Brownell Cc: Len Brown Cc: Jordan Crouse Cc: Jody McIntyre Cc: Stefan Richter Cc: v4l-dvb-maintainer@linuxtv.org Cc: Petr Vandrovec --- drivers/acpi/i2c_ec.c | 1 + drivers/i2c/busses/i2c-amd756-s4882.c | 2 ++ drivers/i2c/busses/i2c-ibm_iic.c | 1 + drivers/i2c/busses/i2c-mv64xxx.c | 1 + drivers/i2c/busses/scx200_acb.c | 7 ++++--- drivers/ieee1394/pcilynx.c | 1 + drivers/media/dvb/b2c2/flexcop-i2c.c | 1 + drivers/media/dvb/dvb-usb/dvb-usb-i2c.c | 1 + drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c | 1 + drivers/media/video/cafe_ccic.c | 1 + drivers/media/video/pvrusb2/pvrusb2-i2c-core.c | 1 + drivers/media/video/usbvision/usbvision-i2c.c | 1 + drivers/media/video/w9968cf.c | 1 + drivers/media/video/zoran_card.c | 1 + drivers/video/matrox/i2c-matroxfb.c | 1 + 15 files changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/i2c_ec.c b/drivers/acpi/i2c_ec.c index 8338be0990bc..bb54b6cdb30b 100644 --- a/drivers/acpi/i2c_ec.c +++ b/drivers/acpi/i2c_ec.c @@ -340,6 +340,7 @@ static int acpi_ec_hc_add(struct acpi_device *device) smbus->adapter.owner = THIS_MODULE; smbus->adapter.algo = &acpi_ec_smbus_algorithm; smbus->adapter.algo_data = smbus; + smbus->adapter.dev.parent = &device->dev; if (i2c_add_adapter(&smbus->adapter)) { ACPI_DEBUG_PRINT((ACPI_DB_WARN, diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index 08e915730caf..e5e96c817566 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -184,12 +184,14 @@ static int __init amd756_s4882_init(void) s4882_algo[0].smbus_xfer = amd756_access_virt0; s4882_adapter[0] = amd756_smbus; s4882_adapter[0].algo = s4882_algo; + s4882_adapter[0].dev.parent = amd756_smbus.dev.parent; for (i = 1; i < 5; i++) { s4882_algo[i] = *(amd756_smbus.algo); s4882_adapter[i] = amd756_smbus; sprintf(s4882_adapter[i].name, "SMBus 8111 adapter (CPU%d)", i-1); s4882_adapter[i].algo = s4882_algo+i; + s4882_adapter[i].dev.parent = amd756_smbus.dev.parent; } s4882_algo[1].smbus_xfer = amd756_access_virt1; s4882_algo[2].smbus_xfer = amd756_access_virt2; diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 1898e9987021..8b14d14e60ca 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -727,6 +727,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){ /* Register it with i2c layer */ adap = &dev->adap; + adap->dev.parent = &ocp->dev; strcpy(adap->name, "IBM IIC"); i2c_set_adapdata(adap, dev); adap->id = I2C_HW_OCP; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 490173611d6b..a3283b907eb8 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -520,6 +520,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) rc = -ENXIO; goto exit_unmap_regs; } + drv_data->adapter.dev.parent = &pd->dev; drv_data->adapter.id = I2C_HW_MV64XXX; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 714bae780953..0b082c5a0195 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -428,7 +428,7 @@ static __init int scx200_acb_probe(struct scx200_acb_iface *iface) } static __init struct scx200_acb_iface *scx200_create_iface(const char *text, - int index) + struct device *dev, int index) { struct scx200_acb_iface *iface; struct i2c_adapter *adapter; @@ -446,6 +446,7 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text, adapter->id = I2C_HW_SMBUS_SCX200; adapter->algo = &scx200_acb_algorithm; adapter->class = I2C_CLASS_HWMON; + adapter->dev.parent = dev; mutex_init(&iface->mutex); @@ -486,7 +487,7 @@ static __init int scx200_create_pci(const char *text, struct pci_dev *pdev, struct scx200_acb_iface *iface; int rc; - iface = scx200_create_iface(text, 0); + iface = scx200_create_iface(text, &pdev->dev, 0); if (iface == NULL) return -ENOMEM; @@ -524,7 +525,7 @@ static int __init scx200_create_isa(const char *text, unsigned long base, struct scx200_acb_iface *iface; int rc; - iface = scx200_create_iface(text, index); + iface = scx200_create_iface(text, NULL, index); if (iface == NULL) return -ENOMEM; diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index fbb7f14ec509..0742befe9227 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -1434,6 +1434,7 @@ static int __devinit add_card(struct pci_dev *dev, i2c_adapter_data = bit_data; i2c_ad->algo_data = &i2c_adapter_data; i2c_adapter_data.data = lynx; + i2c_ad->dev.parent = &dev->dev; PRINTD(KERN_DEBUG, lynx->id,"original eeprom control: %d", reg_read(lynx, SERIAL_EEPROM_CONTROL)); diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index e0bd2d8f0f0c..5347a406fff7 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -190,6 +190,7 @@ int flexcop_i2c_init(struct flexcop_device *fc) fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL; fc->i2c_adap.algo = &flexcop_algo; fc->i2c_adap.algo_data = NULL; + fc->i2c_adap.dev.parent = fc->dev; if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0) return ret; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c index 55ba020386c9..70df31b0a8a9 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c @@ -27,6 +27,7 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d) #endif d->i2c_adap.algo = d->props.i2c_algo; d->i2c_adap.algo_data = NULL; + d->i2c_adap.dev.parent = &d->udev->dev; i2c_set_adapdata(&d->i2c_adap, d); diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 60820deb900b..b60cdc93d6db 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -1690,6 +1690,7 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i #endif ttusb->i2c_adap.algo = &ttusb_dec_algo; ttusb->i2c_adap.algo_data = NULL; + ttusb->i2c_adap.dev.parent = &udev->dev; result = i2c_add_adapter(&ttusb->i2c_adap); if (result) { diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index fb1410c6f864..4dae8925667f 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -549,6 +549,7 @@ static int cafe_smbus_setup(struct cafe_camera *cam) adap->client_unregister = cafe_smbus_detach; adap->algo = &cafe_smbus_algo; strcpy(adap->name, "cafe_ccic"); + adap->dev.parent = &cam->pdev->dev; i2c_set_adapdata(adap, cam); ret = i2c_add_adapter(adap); if (ret) diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index f9bb41d8f4f3..62a7cfca837d 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -977,6 +977,7 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) memcpy(&hdw->i2c_adap,&pvr2_i2c_adap_template,sizeof(hdw->i2c_adap)); memcpy(&hdw->i2c_algo,&pvr2_i2c_algo_template,sizeof(hdw->i2c_algo)); strlcpy(hdw->i2c_adap.name,hdw->name,sizeof(hdw->i2c_adap.name)); + hdw->i2c_adap.dev.parent = &hdw->usb_dev->dev; hdw->i2c_adap.algo = &hdw->i2c_algo; hdw->i2c_adap.algo_data = hdw; hdw->i2c_pend_mask = 0; diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index 858252c15084..a242b76aea89 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -258,6 +258,7 @@ int usbvision_init_i2c(struct usb_usbvision *usbvision) sprintf(usbvision->i2c_adap.name + strlen(usbvision->i2c_adap.name), " #%d", usbvision->vdev->minor & 0x1f); PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name); + usbvision->i2c_adap.dev.parent = &usbvision->dev->dev; i2c_set_adapdata(&usbvision->i2c_adap, usbvision); i2c_set_clientdata(&usbvision->i2c_client, usbvision); diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c index 6e64af293be5..8f31613b9903 100644 --- a/drivers/media/video/w9968cf.c +++ b/drivers/media/video/w9968cf.c @@ -1573,6 +1573,7 @@ static int w9968cf_i2c_init(struct w9968cf_device* cam) memcpy(&cam->i2c_adapter, &adap, sizeof(struct i2c_adapter)); strcpy(cam->i2c_adapter.name, "w9968cf"); + cam->i2c_adapter.dev.parent = &cam->usbdev->dev; i2c_set_adapdata(&cam->i2c_adapter, cam); DBG(6, "Registering I2C adapter with kernel...") diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c index 4d1eb2fba34a..73162a3a61dd 100644 --- a/drivers/media/video/zoran_card.c +++ b/drivers/media/video/zoran_card.c @@ -843,6 +843,7 @@ zoran_register_i2c (struct zoran *zr) sizeof(I2C_NAME(&zr->i2c_adapter)) - 1); i2c_set_adapdata(&zr->i2c_adapter, zr); zr->i2c_adapter.algo_data = &zr->i2c_algo; + zr->i2c_adapter.dev.parent = &zr->pci_dev->dev; return i2c_bit_add_bus(&zr->i2c_adapter); } diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c index f64c4a0984cd..5ec718a5fe22 100644 --- a/drivers/video/matrox/i2c-matroxfb.c +++ b/drivers/video/matrox/i2c-matroxfb.c @@ -115,6 +115,7 @@ static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo, minfo->fbcon.node); i2c_set_adapdata(&b->adapter, b); b->adapter.algo_data = &b->bac; + b->adapter.dev.parent = &ACCESS_FBINFO(pcidev)->dev; b->bac = matrox_i2c_algo_template; b->bac.data = b; err = i2c_bit_add_bus(&b->adapter); -- cgit v1.2.2 From fe2c8d51af96ef7b8ec0bfd70ec62bbe32c0696e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:04 +0100 Subject: i2c: Remove the warning on missing adapter device Now that the i2c_adapter migration plan changed and we are going to keep i2c_adapter.dev, it's no longer that urgent to add a proper device to all i2c_adapter drivers. Thus is seems resonable to degrade the warning asking authors to migrate their driver to a debug message. Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 9653f7f81561..21fe1406c8b4 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -217,9 +217,8 @@ int i2c_add_adapter(struct i2c_adapter *adap) */ if (adap->dev.parent == NULL) { adap->dev.parent = &platform_bus; - printk(KERN_WARNING "**WARNING** I2C adapter driver [%s] " - "forgot to specify physical device; fix it!\n", - adap->name); + pr_debug("I2C adapter driver [%s] forgot to specify " + "physical device\n", adap->name); } sprintf(adap->dev.bus_id, "i2c-%d", adap->nr); adap->dev.driver = &i2c_adapter_driver; -- cgit v1.2.2 From 5dd3ffae0afe355738eca14da1b47284bdae6240 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 13 Feb 2007 22:09:04 +0100 Subject: i2c: Stop using i2c_adapter.class_dev Stop using i2c_adapter.class_dev, as it is going to be removed soon. Luckily, there are only 4 RTC drivers affected. Signed-off-by: Jean Delvare Cc: Alessandro Zummo --- drivers/rtc/rtc-ds1672.c | 2 +- drivers/rtc/rtc-pcf8563.c | 2 +- drivers/rtc/rtc-rs5c372.c | 2 +- drivers/rtc/rtc-x1205.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c index 205fa28593b7..dfef1637bfb8 100644 --- a/drivers/rtc/rtc-ds1672.c +++ b/drivers/rtc/rtc-ds1672.c @@ -199,7 +199,7 @@ static int ds1672_probe(struct i2c_adapter *adapter, int address, int kind) struct i2c_client *client; struct rtc_device *rtc; - dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__); + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { err = -ENODEV; diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c index 038118bbfaea..0242d803ebe5 100644 --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -279,7 +279,7 @@ static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind) int err = 0; - dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__); + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { err = -ENODEV; diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c index e7851e3739ab..09bbe575647b 100644 --- a/drivers/rtc/rtc-rs5c372.c +++ b/drivers/rtc/rtc-rs5c372.c @@ -499,7 +499,7 @@ static int rs5c372_probe(struct i2c_adapter *adapter, int address, int kind) struct rs5c372 *rs5c372; struct rtc_time tm; - dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__); + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { err = -ENODEV; diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index 019ae255b0c8..513d1a611aab 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -506,7 +506,7 @@ static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) struct i2c_client *client; struct rtc_device *rtc; - dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__); + dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { err = -ENODEV; -- cgit v1.2.2 From 02ed82ccc5171bc3c88666568edcb71f3d4a79f6 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Tue, 13 Feb 2007 16:00:49 -0600 Subject: [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S Eliminate needless invocation of the SYNC macro (which always evaluates to nothing on BookE) from head_fsl_booke.S (for both arch/ppc & arch/powerpc). Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala --- arch/powerpc/kernel/head_fsl_booke.S | 2 -- arch/ppc/kernel/head_fsl_booke.S | 2 -- 2 files changed, 4 deletions(-) diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 54f40d95cdb9..1f155d399d57 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -892,7 +892,6 @@ load_up_spe: REST_GPR(9, r11) REST_GPR(12, r11) lwz r11,GPR11(r11) - SYNC rfi /* @@ -956,7 +955,6 @@ _GLOBAL(giveup_altivec) _GLOBAL(giveup_spe) mfmsr r5 oris r5,r5,MSR_SPE@h - SYNC mtmsr r5 /* enable use of SPE now */ isync cmpi 0,r3,0 diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 54f40d95cdb9..1f155d399d57 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -892,7 +892,6 @@ load_up_spe: REST_GPR(9, r11) REST_GPR(12, r11) lwz r11,GPR11(r11) - SYNC rfi /* @@ -956,7 +955,6 @@ _GLOBAL(giveup_altivec) _GLOBAL(giveup_spe) mfmsr r5 oris r5,r5,MSR_SPE@h - SYNC mtmsr r5 /* enable use of SPE now */ isync cmpi 0,r3,0 -- cgit v1.2.2 From f65e4fa8e0c6022ad58dc88d1b11b12589ed7f9f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 28 Sep 2006 01:45:21 +0100 Subject: [MIPS] Improve branch prediction in ll/sc atomic operations. Now that finally all supported versions of binutils have functioning support for .subsection use .subsection to tweak the branch prediction I did not modify the R10000 errata variants because it seems unclear if this will invalidate the workaround which actually relies on the cheesy prediction of branch likely to cause a misspredict if the sc was successful. Signed-off-by: Ralf Baechle --- include/asm-mips/atomic.h | 50 ++++++++++++++++++++++++++++++++-------- include/asm-mips/bitops.h | 33 +++++++++++++++++++++----- include/asm-mips/spinlock.h | 56 +++++++++++++++++++++++++++++++++++---------- include/asm-mips/system.h | 20 ++++++++++++---- 4 files changed, 127 insertions(+), 32 deletions(-) diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h index c1a2409bb52a..8578869a8bcf 100644 --- a/include/asm-mips/atomic.h +++ b/include/asm-mips/atomic.h @@ -69,7 +69,10 @@ static __inline__ void atomic_add(int i, atomic_t * v) "1: ll %0, %1 # atomic_add \n" " addu %0, %2 \n" " sc %0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); @@ -111,7 +114,10 @@ static __inline__ void atomic_sub(int i, atomic_t * v) "1: ll %0, %1 # atomic_sub \n" " subu %0, %2 \n" " sc %0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); @@ -155,8 +161,11 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) "1: ll %1, %2 # atomic_add_return \n" " addu %0, %1, %3 \n" " sc %0, %2 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " addu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -204,8 +213,11 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) "1: ll %1, %2 # atomic_sub_return \n" " subu %0, %1, %3 \n" " sc %0, %2 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " subu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -267,10 +279,13 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) " bltz %0, 1f \n" " sc %0, %2 \n" " .set noreorder \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " subu %0, %1, %3 \n" " .set reorder \n" "1: \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -429,7 +444,10 @@ static __inline__ void atomic64_add(long i, atomic64_t * v) "1: lld %0, %1 # atomic64_add \n" " addu %0, %2 \n" " scd %0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); @@ -471,7 +489,10 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v) "1: lld %0, %1 # atomic64_sub \n" " subu %0, %2 \n" " scd %0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); @@ -515,8 +536,11 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) "1: lld %1, %2 # atomic64_add_return \n" " addu %0, %1, %3 \n" " scd %0, %2 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " addu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -564,8 +588,11 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) "1: lld %1, %2 # atomic64_sub_return \n" " subu %0, %1, %3 \n" " scd %0, %2 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " subu %0, %1, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -627,10 +654,13 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) " bltz %0, 1f \n" " scd %0, %2 \n" " .set noreorder \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" " dsubu %0, %1, %3 \n" " .set reorder \n" "1: \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h index 06445de1324b..06c08228a525 100644 --- a/include/asm-mips/bitops.h +++ b/include/asm-mips/bitops.h @@ -68,7 +68,10 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) "1: " __LL "%0, %1 # set_bit \n" " or %0, %2 \n" " " __SC "%0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (*m) : "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m)); @@ -116,7 +119,10 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) "1: " __LL "%0, %1 # clear_bit \n" " and %0, %2 \n" " " __SC "%0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (*m) : "ir" (~(1UL << (nr & SZLONG_MASK))), "m" (*m)); @@ -166,7 +172,10 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) "1: " __LL "%0, %1 # change_bit \n" " xor %0, %2 \n" " " __SC "%0, %1 \n" - " beqz %0, 1b \n" + " beqz %0, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (temp), "=m" (*m) : "ir" (1UL << (nr & SZLONG_MASK)), "m" (*m)); @@ -222,8 +231,12 @@ static inline int test_and_set_bit(unsigned long nr, "1: " __LL "%0, %1 # test_and_set_bit \n" " or %2, %0, %3 \n" " " __SC "%2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" " .set pop \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) @@ -290,8 +303,12 @@ static inline int test_and_clear_bit(unsigned long nr, " or %2, %0, %3 \n" " xor %2, %3 \n" " " __SC "%2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" " .set pop \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) @@ -356,8 +373,12 @@ static inline int test_and_change_bit(unsigned long nr, "1: " __LL "%0, %1 # test_and_change_bit \n" " xor %2, %0, %3 \n" " " __SC "\t%2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" " and %2, %0, %3 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" " .set pop \n" : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << (nr & SZLONG_MASK)), "m" (*m) diff --git a/include/asm-mips/spinlock.h b/include/asm-mips/spinlock.h index fc3217fc1118..f1755d28a36a 100644 --- a/include/asm-mips/spinlock.h +++ b/include/asm-mips/spinlock.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1999, 2000, 06 by Ralf Baechle + * Copyright (C) 1999, 2000, 06 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #ifndef _ASM_SPINLOCK_H @@ -49,11 +49,18 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock) __asm__ __volatile__( " .set noreorder # __raw_spin_lock \n" "1: ll %1, %2 \n" - " bnez %1, 1b \n" + " bnez %1, 2f \n" " li %1, 1 \n" " sc %1, %0 \n" - " beqz %1, 1b \n" + " beqz %1, 2f \n" " nop \n" + " .subsection 2 \n" + "2: ll %1, %2 \n" + " bnez %1, 2b \n" + " li %1, 1 \n" + " b 1b \n" + " nop \n" + " .previous \n" " .set reorder \n" : "=m" (lock->lock), "=&r" (tmp) : "m" (lock->lock) @@ -99,8 +106,12 @@ static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock) "1: ll %0, %3 \n" " ori %2, %0, 1 \n" " sc %2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" " andi %2, %0, 1 \n" + " .subsection 2 \n" + "2: b 1b \n" + " nop \n" + " .previous \n" " .set reorder" : "=&r" (temp), "=m" (lock->lock), "=&r" (res) : "m" (lock->lock) @@ -154,11 +165,18 @@ static inline void __raw_read_lock(raw_rwlock_t *rw) __asm__ __volatile__( " .set noreorder # __raw_read_lock \n" "1: ll %1, %2 \n" - " bltz %1, 1b \n" + " bltz %1, 2f \n" " addu %1, 1 \n" " sc %1, %0 \n" " beqz %1, 1b \n" " nop \n" + " .subsection 2 \n" + "2: ll %1, %2 \n" + " bltz %1, 2b \n" + " addu %1, 1 \n" + " b 1b \n" + " nop \n" + " .previous \n" " .set reorder \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) @@ -192,8 +210,12 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw) "1: ll %1, %2 \n" " sub %1, 1 \n" " sc %1, %0 \n" - " beqz %1, 1b \n" + " beqz %1, 2f \n" + " nop \n" + " .subsection 2 \n" + "2: b 1b \n" " nop \n" + " .previous \n" " .set reorder \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) @@ -222,11 +244,18 @@ static inline void __raw_write_lock(raw_rwlock_t *rw) __asm__ __volatile__( " .set noreorder # __raw_write_lock \n" "1: ll %1, %2 \n" - " bnez %1, 1b \n" + " bnez %1, 2f \n" " lui %1, 0x8000 \n" " sc %1, %0 \n" - " beqz %1, 1b \n" + " beqz %1, 2f \n" + " nop \n" + " .subsection 2 \n" + "2: ll %1, %2 \n" + " bnez %1, 2b \n" + " lui %1, 0x8000 \n" + " b 1b \n" " nop \n" + " .previous \n" " .set reorder \n" : "=m" (rw->lock), "=&r" (tmp) : "m" (rw->lock) @@ -322,12 +351,15 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw) " bnez %1, 2f \n" " lui %1, 0x8000 \n" " sc %1, %0 \n" - " beqz %1, 1b \n" - " nop \n" + " beqz %1, 3f \n" + " li %2, 1 \n" + "2: \n" __WEAK_ORDERING_MB - " li %2, 1 \n" + " .subsection 2 \n" + "3: b 1b \n" + " li %2, 0 \n" + " .previous \n" " .set reorder \n" - "2: \n" : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret) : "m" (rw->lock) : "memory"); diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h index 5e1289c85ed9..597a3743f6a1 100644 --- a/include/asm-mips/system.h +++ b/include/asm-mips/system.h @@ -110,7 +110,10 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) " move %2, %z4 \n" " .set mips3 \n" " sc %2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -155,7 +158,10 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) "1: lld %0, %3 # xchg_u64 \n" " move %2, %z4 \n" " scd %2, %1 \n" - " beqz %2, 1b \n" + " beqz %2, 2f \n" + " .subsection 2 \n" + "2: b 1b \n" + " .previous \n" " .set mips0 \n" : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) @@ -232,8 +238,11 @@ static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, " move $1, %z4 \n" " .set mips3 \n" " sc $1, %1 \n" - " beqz $1, 1b \n" + " beqz $1, 3f \n" "2: \n" + " .subsection 2 \n" + "3: b 1b \n" + " .previous \n" " .set pop \n" : "=&r" (retval), "=R" (*m) : "R" (*m), "Jr" (old), "Jr" (new) @@ -283,8 +292,11 @@ static inline unsigned long __cmpxchg_u64(volatile int * m, unsigned long old, " bne %0, %z3, 2f \n" " move $1, %z4 \n" " scd $1, %1 \n" - " beqz $1, 1b \n" + " beqz $1, 3f \n" "2: \n" + " .subsection 2 \n" + "3: b 1b \n" + " .previous \n" " .set pop \n" : "=&r" (retval), "=R" (*m) : "R" (*m), "Jr" (old), "Jr" (new) -- cgit v1.2.2 From 9a88cbb5227970757881b1a65be01dea61fe2584 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 16 Nov 2006 02:56:12 +0000 Subject: [MIPS] Unify dma-{coherent,noncoherent.ip27,ip32} Platforms will now have to supply a function dma_device_is_coherent which returns if a particular device participates in the coherence domain. For most platforms this function will always return 0 or 1. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 5 - arch/mips/mm/Makefile | 14 +- arch/mips/mm/dma-coherent.c | 254 ----------------- arch/mips/mm/dma-default.c | 363 ++++++++++++++++++++++++ arch/mips/mm/dma-ip27.c | 257 ----------------- arch/mips/mm/dma-ip32.c | 383 -------------------------- arch/mips/mm/dma-noncoherent.c | 370 ------------------------- arch/mips/pci/Makefile | 2 +- arch/mips/pci/pci-dac.c | 79 ++++++ include/asm-mips/mach-generic/dma-coherence.h | 43 +++ include/asm-mips/mach-generic/kmalloc.h | 1 + include/asm-mips/mach-ip27/dma-coherence.h | 49 ++++ include/asm-mips/mach-ip32/dma-coherence.h | 71 +++++ include/asm-mips/mach-jazz/dma-coherence.h | 40 +++ 14 files changed, 649 insertions(+), 1282 deletions(-) delete mode 100644 arch/mips/mm/dma-coherent.c create mode 100644 arch/mips/mm/dma-default.c delete mode 100644 arch/mips/mm/dma-ip27.c delete mode 100644 arch/mips/mm/dma-ip32.c delete mode 100644 arch/mips/mm/dma-noncoherent.c create mode 100644 arch/mips/pci/pci-dac.c create mode 100644 include/asm-mips/mach-generic/dma-coherence.h create mode 100644 include/asm-mips/mach-ip27/dma-coherence.h create mode 100644 include/asm-mips/mach-ip32/dma-coherence.h create mode 100644 include/asm-mips/mach-jazz/dma-coherence.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 5fe195a41a80..a92ce6bd7cf1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -598,8 +598,6 @@ config SGI_IP32 select ARC select ARC32 select BOOT_ELF32 - select OWN_DMA - select DMA_IP32 select DMA_NONCOHERENT select HW_HAS_PCI select R5000_CPU_SCACHE @@ -883,9 +881,6 @@ config DMA_NONCOHERENT config DMA_NEED_PCI_MAP_STATE bool -config OWN_DMA - bool - config EARLY_PRINTK bool diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 19e41fd186c4..de5727385bc6 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -2,8 +2,8 @@ # Makefile for the Linux/MIPS-specific parts of the memory manager. # -obj-y += cache.o extable.o fault.o init.o pgtable.o \ - tlbex.o tlbex-fault.o +obj-y += cache.o dma-default.o extable.o fault.o \ + init.o pgtable.o tlbex.o tlbex-fault.o obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o @@ -32,14 +32,4 @@ obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o -# -# Choose one DMA coherency model -# -ifndef CONFIG_OWN_DMA -obj-$(CONFIG_DMA_COHERENT) += dma-coherent.o -obj-$(CONFIG_DMA_NONCOHERENT) += dma-noncoherent.o -endif -obj-$(CONFIG_DMA_IP27) += dma-ip27.o -obj-$(CONFIG_DMA_IP32) += dma-ip32.o - EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/mm/dma-coherent.c b/arch/mips/mm/dma-coherent.c deleted file mode 100644 index 5697c6e250a3..000000000000 --- a/arch/mips/mm/dma-coherent.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ -#include -#include -#include -#include -#include - -#include -#include - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_phys(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) - __attribute__((alias("dma_alloc_noncoherent"))); - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) __attribute__((alias("dma_free_noncoherent"))); - -EXPORT_SYMBOL(dma_free_coherent); - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return __pa(ptr); -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - sg->dma_address = (dma_addr_t)page_to_phys(sg->page) + sg->offset; - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_cache_sync); - -/* The DAC routines are a PCIism.. */ - -#ifdef CONFIG_PCI - -#include - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - return (dma64_addr_t)page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return mem_map + (dma_addr >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); - -#endif /* CONFIG_PCI */ diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c new file mode 100644 index 000000000000..4a32e939698f --- /dev/null +++ b/arch/mips/mm/dma-default.c @@ -0,0 +1,363 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Ani Joshi + * Copyright (C) 2000, 2001, 06 Ralf Baechle + * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +/* + * Warning on the terminology - Linux calls an uncached area coherent; + * MIPS terminology calls memory areas with hardware maintained coherency + * coherent. + */ + +static inline int cpu_is_noncoherent_r10000(struct device *dev) +{ + return !plat_device_is_coherent(dev) && + (current_cpu_data.cputype == CPU_R10000 && + current_cpu_data.cputype == CPU_R12000); +} + +void *dma_alloc_noncoherent(struct device *dev, size_t size, + dma_addr_t * dma_handle, gfp_t gfp) +{ + void *ret; + + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) + gfp |= GFP_DMA; + ret = (void *) __get_free_pages(gfp, get_order(size)); + + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = plat_map_dma_mem(dev, ret, size); + } + + return ret; +} + +EXPORT_SYMBOL(dma_alloc_noncoherent); + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t * dma_handle, gfp_t gfp) +{ + void *ret; + + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) + gfp |= GFP_DMA; + ret = (void *) __get_free_pages(gfp, get_order(size)); + + if (ret) { + memset(ret, 0, size); + *dma_handle = plat_map_dma_mem(dev, ret, size); + + if (!plat_device_is_coherent(dev)) { + dma_cache_wback_inv((unsigned long) ret, size); + ret = UNCAC_ADDR(ret); + } + } + + return ret; +} + +EXPORT_SYMBOL(dma_alloc_coherent); + +void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ + free_pages((unsigned long) vaddr, get_order(size)); +} + +EXPORT_SYMBOL(dma_free_noncoherent); + +void dma_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ + unsigned long addr = (unsigned long) vaddr; + + if (!plat_device_is_coherent(dev)) + addr = CAC_ADDR(addr); + + free_pages(addr, get_order(size)); +} + +EXPORT_SYMBOL(dma_free_coherent); + +static inline void __dma_sync(unsigned long addr, size_t size, + enum dma_data_direction direction) +{ + switch (direction) { + case DMA_TO_DEVICE: + dma_cache_wback(addr, size); + break; + + case DMA_FROM_DEVICE: + dma_cache_inv(addr, size); + break; + + case DMA_BIDIRECTIONAL: + dma_cache_wback_inv(addr, size); + break; + + default: + BUG(); + } +} + +dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + unsigned long addr = (unsigned long) ptr; + + if (!plat_device_is_coherent(dev)) + __dma_sync(addr, size, direction); + + return plat_map_dma_mem(dev, ptr, size); +} + +EXPORT_SYMBOL(dma_map_single); + +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + if (cpu_is_noncoherent_r10000(dev)) + __dma_sync(plat_dma_addr_to_phys(dma_addr) + PAGE_OFFSET, size, + direction); + + plat_unmap_dma_mem(dma_addr); +} + +EXPORT_SYMBOL(dma_unmap_single); + +int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + for (i = 0; i < nents; i++, sg++) { + unsigned long addr; + + addr = (unsigned long) page_address(sg->page); + if (!plat_device_is_coherent(dev) && addr) + __dma_sync(addr + sg->offset, sg->length, direction); + sg->dma_address = plat_map_dma_mem_page(dev, sg->page) + + sg->offset; + } + + return nents; +} + +EXPORT_SYMBOL(dma_map_sg); + +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev)) { + unsigned long addr; + + addr = (unsigned long) page_address(page) + offset; + dma_cache_wback_inv(addr, size); + } + + return plat_map_dma_mem_page(dev, page) + offset; +} + +EXPORT_SYMBOL(dma_map_page); + +void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) { + unsigned long addr; + + addr = plat_dma_addr_to_phys(dma_address); + dma_cache_wback_inv(addr, size); + } + + plat_unmap_dma_mem(dma_address); +} + +EXPORT_SYMBOL(dma_unmap_page); + +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + unsigned long addr; + int i; + + BUG_ON(direction == DMA_NONE); + + for (i = 0; i < nhwentries; i++, sg++) { + if (!plat_device_is_coherent(dev) && + direction != DMA_TO_DEVICE) { + addr = (unsigned long) page_address(sg->page); + if (addr) + __dma_sync(addr + sg->offset, sg->length, + direction); + } + plat_unmap_dma_mem(sg->dma_address); + } +} + +EXPORT_SYMBOL(dma_unmap_sg); + +void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_for_cpu); + +void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_for_device); + +void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr + offset, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_range_for_cpu); + +void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr + offset, size, direction); + } +} + +EXPORT_SYMBOL(dma_sync_single_range_for_device); + +void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + /* Make sure that gcc doesn't leave the empty loop body. */ + for (i = 0; i < nelems; i++, sg++) { + if (!plat_device_is_coherent(dev)) + __dma_sync((unsigned long)page_address(sg->page), + sg->length, direction); + plat_unmap_dma_mem(sg->dma_address); + } +} + +EXPORT_SYMBOL(dma_sync_sg_for_cpu); + +void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + int i; + + BUG_ON(direction == DMA_NONE); + + /* Make sure that gcc doesn't leave the empty loop body. */ + for (i = 0; i < nelems; i++, sg++) { + if (!plat_device_is_coherent(dev)) + __dma_sync((unsigned long)page_address(sg->page), + sg->length, direction); + plat_unmap_dma_mem(sg->dma_address); + } +} + +EXPORT_SYMBOL(dma_sync_sg_for_device); + +int dma_mapping_error(dma_addr_t dma_addr) +{ + return 0; +} + +EXPORT_SYMBOL(dma_mapping_error); + +int dma_supported(struct device *dev, u64 mask) +{ + /* + * we fall back to GFP_DMA when the mask isn't all 1s, + * so we can't guarantee allocations that must be + * within a tighter range than GFP_DMA.. + */ + if (mask < 0x00ffffff) + return 0; + + return 1; +} + +EXPORT_SYMBOL(dma_supported); + +int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) +{ + return plat_device_is_coherent(dev); +} + +EXPORT_SYMBOL(dma_is_consistent); + +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev)) + dma_cache_wback_inv((unsigned long)vaddr, size); +} + +EXPORT_SYMBOL(dma_cache_sync); diff --git a/arch/mips/mm/dma-ip27.c b/arch/mips/mm/dma-ip27.c deleted file mode 100644 index f088344db465..000000000000 --- a/arch/mips/mm/dma-ip27.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ -#include -#include -#include -#include -#include - -#include -#include - -#define pdev_to_baddr(pdev, addr) \ - (BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr)) -#define dev_to_baddr(dev, addr) \ - pdev_to_baddr(to_pci_dev(dev), (addr)) - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = dev_to_baddr(dev, virt_to_phys(ret)); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) - __attribute__((alias("dma_alloc_noncoherent"))); - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) __attribute__((alias("dma_free_noncoherent"))); - -EXPORT_SYMBOL(dma_free_coherent); - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return dev_to_baddr(dev, __pa(ptr)); -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - sg->dma_address = (dma_addr_t) dev_to_baddr(dev, - page_to_phys(sg->page) + sg->offset); - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return dev_to_baddr(dev, page_to_phys(page) + offset); -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_cache_sync); - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - dma64_addr_t addr = page_to_phys(page) + offset; - - return (dma64_addr_t) pdev_to_baddr(pdev, addr); -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus); - - return pfn_to_page((dma_addr - bc->baddr) >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); diff --git a/arch/mips/mm/dma-ip32.c b/arch/mips/mm/dma-ip32.c deleted file mode 100644 index b42b6f7456e6..000000000000 --- a/arch/mips/mm/dma-ip32.c +++ /dev/null @@ -1,383 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * Copyright (C) 2005 Ilya A. Volynets-Evenbakh - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - * IP32 changes by Ilya. - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -/* - * Warning on the terminology - Linux calls an uncached area coherent; - * MIPS terminology calls memory areas with hardware maintained coherency - * coherent. - */ - -/* - * Few notes. - * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M - * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for native-endian) - * 3. All other devices see memory as one big chunk at 0x40000000 - * 4. Non-PCI devices will pass NULL as struct device* - * Thus we translate differently, depending on device. - */ - -#define RAM_OFFSET_MASK 0x3fffffff - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - unsigned long addr = virt_to_phys(ret)&RAM_OFFSET_MASK; - memset(ret, 0, size); - if(dev==NULL) - addr+= CRIME_HI_MEM_BASE; - *dma_handle = addr; - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - - ret = dma_alloc_noncoherent(dev, size, dma_handle, gfp); - if (ret) { - dma_cache_wback_inv((unsigned long) ret, size); - ret = UNCAC_ADDR(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - free_pages((unsigned long) vaddr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - addr = CAC_ADDR(addr); - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_coherent); - -static inline void __dma_sync(unsigned long addr, size_t size, - enum dma_data_direction direction) -{ - switch (direction) { - case DMA_TO_DEVICE: - dma_cache_wback(addr, size); - break; - - case DMA_FROM_DEVICE: - dma_cache_inv(addr, size); - break; - - case DMA_BIDIRECTIONAL: - dma_cache_wback_inv(addr, size); - break; - - default: - BUG(); - } -} - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - unsigned long addr = (unsigned long) ptr; - - switch (direction) { - case DMA_TO_DEVICE: - dma_cache_wback(addr, size); - break; - - case DMA_FROM_DEVICE: - dma_cache_inv(addr, size); - break; - - case DMA_BIDIRECTIONAL: - dma_cache_wback_inv(addr, size); - break; - - default: - BUG(); - } - - addr = virt_to_phys(ptr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr+=CRIME_HI_MEM_BASE; - return (dma_addr_t)addr; -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - switch (direction) { - case DMA_TO_DEVICE: - break; - - case DMA_FROM_DEVICE: - break; - - case DMA_BIDIRECTIONAL: - break; - - default: - BUG(); - } -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - unsigned long addr; - - addr = (unsigned long) page_address(sg->page)+sg->offset; - if (addr) - __dma_sync(addr, sg->length, direction); - addr = __pa(addr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr += CRIME_HI_MEM_BASE; - sg->dma_address = (dma_addr_t)addr; - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, size); - addr = __pa(addr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr += CRIME_HI_MEM_BASE; - - return (dma_addr_t)addr; -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - if (direction != DMA_TO_DEVICE) { - unsigned long addr; - - dma_address&=RAM_OFFSET_MASK; - addr = dma_address + PAGE_OFFSET; - if(dma_address>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - dma_cache_wback_inv(addr, size); - } -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - unsigned long addr; - int i; - - BUG_ON(direction == DMA_NONE); - - if (direction == DMA_TO_DEVICE) - return; - - for (i = 0; i < nhwentries; i++, sg++) { - addr = (unsigned long) page_address(sg->page); - if (!addr) - continue; - dma_cache_wback_inv(addr + sg->offset, sg->length); - } -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + offset + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + offset + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - if (direction == DMA_NONE) - return; - - dma_cache_wback_inv((unsigned long)vaddr, size); -} - -EXPORT_SYMBOL(dma_cache_sync); - diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c deleted file mode 100644 index 8cecef0957c3..000000000000 --- a/arch/mips/mm/dma-noncoherent.c +++ /dev/null @@ -1,370 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi - * Copyright (C) 2000, 2001 Ralf Baechle - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ -#include -#include -#include -#include -#include - -#include -#include - -/* - * Warning on the terminology - Linux calls an uncached area coherent; - * MIPS terminology calls memory areas with hardware maintained coherency - * coherent. - */ - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_phys(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - - ret = dma_alloc_noncoherent(dev, size, dma_handle, gfp); - if (ret) { - dma_cache_wback_inv((unsigned long) ret, size); - ret = UNCAC_ADDR(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - free_pages((unsigned long) vaddr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - addr = CAC_ADDR(addr); - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_coherent); - -static inline void __dma_sync(unsigned long addr, size_t size, - enum dma_data_direction direction) -{ - switch (direction) { - case DMA_TO_DEVICE: - dma_cache_wback(addr, size); - break; - - case DMA_FROM_DEVICE: - dma_cache_inv(addr, size); - break; - - case DMA_BIDIRECTIONAL: - dma_cache_wback_inv(addr, size); - break; - - default: - BUG(); - } -} - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - unsigned long addr = (unsigned long) ptr; - - __dma_sync(addr, size, direction); - - return virt_to_phys(ptr); -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - unsigned long addr; - addr = dma_addr + PAGE_OFFSET; - - //__dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - unsigned long addr; - - addr = (unsigned long) page_address(sg->page); - if (addr) { - __dma_sync(addr + sg->offset, sg->length, direction); - sg->dma_address = (dma_addr_t)page_to_phys(sg->page) - + sg->offset; - } - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, size); - - return page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - if (direction != DMA_TO_DEVICE) { - unsigned long addr; - - addr = dma_address + PAGE_OFFSET; - dma_cache_wback_inv(addr, size); - } -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - unsigned long addr; - int i; - - BUG_ON(direction == DMA_NONE); - - if (direction == DMA_TO_DEVICE) - return; - - for (i = 0; i < nhwentries; i++, sg++) { - addr = (unsigned long) page_address(sg->page); - if (addr) - __dma_sync(addr + sg->offset, sg->length, direction); - } -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + offset + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = dma_handle + offset + PAGE_OFFSET; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - if (direction == DMA_NONE) - return; - - dma_cache_wback_inv((unsigned long)vaddr, size); -} - -EXPORT_SYMBOL(dma_cache_sync); - -/* The DAC routines are a PCIism.. */ - -#ifdef CONFIG_PCI - -#include - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - return (dma64_addr_t)page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return mem_map + (dma_addr >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); - -#endif /* CONFIG_PCI */ diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 82b20c28bef8..bf85995ca042 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -2,7 +2,7 @@ # Makefile for the PCI specific kernel interface routines under Linux. # -obj-y += pci.o +obj-y += pci.o pci-dac.o # # PCI bus host bridge specific code diff --git a/arch/mips/pci/pci-dac.c b/arch/mips/pci/pci-dac.c new file mode 100644 index 000000000000..0f0ea1b7d4dd --- /dev/null +++ b/arch/mips/pci/pci-dac.c @@ -0,0 +1,79 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Ani Joshi + * Copyright (C) 2000, 2001, 06 Ralf Baechle + * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include + +dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, + struct page *page, unsigned long offset, int direction) +{ + struct device *dev = &pdev->dev; + + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev)) { + unsigned long addr; + + addr = (unsigned long) page_address(page) + offset; + dma_cache_wback_inv(addr, PAGE_SIZE); + } + + return plat_map_dma_mem_page(dev, page) + offset; +} + +EXPORT_SYMBOL(pci_dac_page_to_dma); + +struct page *pci_dac_dma_to_page(struct pci_dev *pdev, + dma64_addr_t dma_addr) +{ + return pfn_to_page(plat_dma_addr_to_phys(dma_addr) >> PAGE_SHIFT); +} + +EXPORT_SYMBOL(pci_dac_dma_to_page); + +unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, + dma64_addr_t dma_addr) +{ + return dma_addr & ~PAGE_MASK; +} + +EXPORT_SYMBOL(pci_dac_dma_to_offset); + +void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, + dma64_addr_t dma_addr, size_t len, int direction) +{ + BUG_ON(direction == PCI_DMA_NONE); + + if (!plat_device_is_coherent(&pdev->dev)) + dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); +} + +EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); + +void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, + dma64_addr_t dma_addr, size_t len, int direction) +{ + BUG_ON(direction == PCI_DMA_NONE); + + if (!plat_device_is_coherent(&pdev->dev)) + dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); +} + +EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); diff --git a/include/asm-mips/mach-generic/dma-coherence.h b/include/asm-mips/mach-generic/dma-coherence.h new file mode 100644 index 000000000000..df71822fd27b --- /dev/null +++ b/include/asm-mips/mach-generic/dma-coherence.h @@ -0,0 +1,43 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + * + */ +#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H +#define __ASM_MACH_GENERIC_DMA_COHERENCE_H + +struct device; + +static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + return virt_to_phys(addr); +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + return page_to_phys(page); +} + +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return dma_addr; +} + +static void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ +#ifdef CONFIG_DMA_COHERENT + return 1; +#endif +#ifdef CONFIG_DMA_NONCOHERENT + return 0; +#endif +} + +#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-generic/kmalloc.h b/include/asm-mips/mach-generic/kmalloc.h index 410ab5f6c563..b8e6deba352f 100644 --- a/include/asm-mips/mach-generic/kmalloc.h +++ b/include/asm-mips/mach-generic/kmalloc.h @@ -5,6 +5,7 @@ #ifndef CONFIG_DMA_COHERENT /* * Total overkill for most systems but need as a safe default. + * Set this one if any device in the system might do non-coherent DMA. */ #define ARCH_KMALLOC_MINALIGN 128 #endif diff --git a/include/asm-mips/mach-ip27/dma-coherence.h b/include/asm-mips/mach-ip27/dma-coherence.h new file mode 100644 index 000000000000..659816e200d4 --- /dev/null +++ b/include/asm-mips/mach-ip27/dma-coherence.h @@ -0,0 +1,49 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + * + */ +#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H +#define __ASM_MACH_IP27_DMA_COHERENCE_H + +#include + +#define pdev_to_baddr(pdev, addr) \ + (BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr)) +#define dev_to_baddr(dev, addr) \ + pdev_to_baddr(to_pci_dev(dev), (addr)) + +struct device; + +static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr)); + + return pa; +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page)); + + return pa; +} + +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return dma_addr & (0xffUL << 56); +} + +static void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 1; /* IP27 non-cohernet mode is unsupported */ +} + +#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-ip32/dma-coherence.h b/include/asm-mips/mach-ip32/dma-coherence.h new file mode 100644 index 000000000000..950be17bbb86 --- /dev/null +++ b/include/asm-mips/mach-ip32/dma-coherence.h @@ -0,0 +1,71 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + * + */ +#ifndef __ASM_MACH_IP35_DMA_COHERENCE_H +#define __ASM_MACH_IP35_DMA_COHERENCE_H + +#include + +struct device; + +/* + * Few notes. + * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M + * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for + * native-endian) + * 3. All other devices see memory as one big chunk at 0x40000000 + * 4. Non-PCI devices will pass NULL as struct device* + * + * Thus we translate differently, depending on device. + */ + +#define RAM_OFFSET_MASK 0x3fffffffUL + +static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + dma_addr_t pa = virt_to_phys(addr) & RAM_OFFSET_MASK; + + if (dev == NULL) + pa += CRIME_HI_MEM_BASE; + + return pa; +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + dma_addr_t pa; + + pa = page_to_phys(page) & RAM_OFFSET_MASK; + + if (dev == NULL) + pa += CRIME_HI_MEM_BASE; + + return pa; +} + +/* This is almost certainly wrong but it's what dma-ip32.c used to use */ +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + unsigned long addr = dma_addr & RAM_OFFSET_MASK; + + if (dma_addr >= 256*1024*1024) + addr += CRIME_HI_MEM_BASE; + + return addr; +} + +static void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; /* IP32 is non-cohernet */ +} + +#endif /* __ASM_MACH_IP35_DMA_COHERENCE_H */ diff --git a/include/asm-mips/mach-jazz/dma-coherence.h b/include/asm-mips/mach-jazz/dma-coherence.h new file mode 100644 index 000000000000..d66979a124a8 --- /dev/null +++ b/include/asm-mips/mach-jazz/dma-coherence.h @@ -0,0 +1,40 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Ralf Baechle + */ +#ifndef __ASM_MACH_JAZZ_DMA_COHERENCE_H +#define __ASM_MACH_JAZZ_DMA_COHERENCE_H + +#include + +struct device; + +static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) +{ + return vdma_alloc(virt_to_phys(addr), size); +} + +static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) +{ + return vdma_alloc(page_to_phys(page), PAGE_SIZE); +} + +static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) +{ + return vdma_log2phys(dma_addr); +} + +static void plat_unmap_dma_mem(dma_addr_t dma_addr) +{ + vdma_free(dma_addr); +} + +static inline int plat_device_is_coherent(struct device *dev) +{ + return 0; +} + +#endif /* __ASM_MACH_JAZZ_DMA_COHERENCE_H */ -- cgit v1.2.2 From 84b47a959b55930e86d6178d49769bc9ba34bce1 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Feb 2007 22:22:53 +0000 Subject: [MIPS] Don't claim we support dma_declare_coherent_memory - we don't. Signed-off-by: Ralf Baechle --- include/asm-mips/dma-mapping.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-mips/dma-mapping.h b/include/asm-mips/dma-mapping.h index 236d1a467cc7..230b3f1b69b1 100644 --- a/include/asm-mips/dma-mapping.h +++ b/include/asm-mips/dma-mapping.h @@ -68,6 +68,7 @@ extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr); extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction); +#if 0 #define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, @@ -75,5 +76,6 @@ extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, extern void dma_release_declared_memory(struct device *dev); extern void * dma_mark_declared_memory_occupied(struct device *dev, dma_addr_t device_addr, size_t size); +#endif #endif /* _ASM_DMA_MAPPING_H */ -- cgit v1.2.2 From cd1fb9eabea38489579284e0cae0c7019b77b10f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Feb 2007 23:12:38 +0000 Subject: Revert "[MIPS] Fix warning in get_user when fetching pointer object from userspace." This reverts commit 4ed3a77f38c023658784804cb39a7ce18063dc88. --- include/asm-mips/uaccess.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h index 825fcbd9eabd..c12ebc53ef31 100644 --- a/include/asm-mips/uaccess.h +++ b/include/asm-mips/uaccess.h @@ -265,6 +265,8 @@ do { \ */ #define __get_user_asm_ll32(val, addr) \ { \ + unsigned long long __gu_tmp; \ + \ __asm__ __volatile__( \ "1: lw %1, (%3) \n" \ "2: lw %D1, 4(%3) \n" \ @@ -279,8 +281,9 @@ do { \ " " __UA_ADDR " 1b, 4b \n" \ " " __UA_ADDR " 2b, 4b \n" \ " .previous \n" \ - : "=r" (__gu_err), "=&r" (val) \ + : "=r" (__gu_err), "=&r" (__gu_tmp) \ : "0" (0), "r" (addr), "i" (-EFAULT)); \ + (val) = (__typeof__(*(addr))) __gu_tmp; \ } /* -- cgit v1.2.2 From af3d10d52d38d2c56a8bca9943c07b00031fc718 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Feb 2007 23:26:01 +0000 Subject: [MIPS] IP27: Enable N32 support in defconfig. Signed-off-by: Ralf Baechle --- arch/mips/configs/ip27_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 96090f28373b..f21186c12d81 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -264,7 +264,7 @@ CONFIG_BINFMT_ELF=y CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y -# CONFIG_MIPS32_N32 is not set +CONFIG_MIPS32_N32=y CONFIG_BINFMT_ELF32=y # -- cgit v1.2.2 From dd02f06aa96ab4590da12704366450a2d4753d3c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 00:50:57 +0000 Subject: [MIPS] signal: Fix warnings in o32 compat code. Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal32.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 183fc7e55f34..1b9262d3fd23 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -139,8 +139,20 @@ struct ucontext32 { sigset_t32 uc_sigmask; /* mask last for extensibility */ }; +/* + * Horribly complicated - with the bloody RM9000 workarounds enabled + * the signal trampolines is moving to the end of the structure so we can + * increase the alignment without breaking software compatibility. + */ #if ICACHE_REFILLS_WORKAROUND_WAR == 0 +struct sigframe32 { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_code[2]; /* signal trampoline */ + struct sigcontext32 sf_sc; + sigset_t sf_mask; +}; + struct rt_sigframe32 { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_code[2]; /* signal trampoline */ @@ -150,6 +162,14 @@ struct rt_sigframe32 { #else /* ICACHE_REFILLS_WORKAROUND_WAR */ +struct sigframe32 { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_pad[2]; + struct sigcontext32 sf_sc; /* hw context */ + sigset_t sf_mask; + u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ +}; + struct rt_sigframe32 { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_pad[2]; @@ -493,10 +513,10 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) { - struct sigframe __user *frame; + struct sigframe32 __user *frame; sigset_t blocked; - frame = (struct sigframe __user *) regs.regs[29]; + frame = (struct sigframe32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked))) @@ -581,7 +601,7 @@ badframe: int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set) { - struct sigframe __user *frame; + struct sigframe32 __user *frame; int err = 0; frame = get_sigframe(ka, regs, sizeof(*frame)); -- cgit v1.2.2 From 205d84aaea380bbd1cc1079d44086cd50c2c2dad Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 01:28:09 +0000 Subject: [MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal-common.h | 6 ------ arch/mips/kernel/signal_n32.c | 4 ++++ 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index 9a8abd67ec5c..d9a832f67e8a 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -45,12 +45,6 @@ struct sigframe { #endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ -/* - * handle hardware context - */ -extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); -extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); - /* * Determine which stack to use.. */ diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 57456e6a0c62..b17ef04691e3 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -49,6 +49,10 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); +extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); + + /* IRIX compatible stack_t */ typedef struct sigaltstack32 { s32 ss_sp; -- cgit v1.2.2 From 66680583461d7cae281cef63c050c9b6371e3286 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 01:31:48 +0000 Subject: [MIPS] signal: Move sigframe definition for native O32/N64 into signal.c Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal-common.h | 26 -------------------------- arch/mips/kernel/signal.c | 20 ++++++++++++++++++++ 2 files changed, 20 insertions(+), 26 deletions(-) diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index d9a832f67e8a..b95e542ace27 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -19,32 +19,6 @@ # define DEBUGP(fmt, args...) #endif -/* - * Horribly complicated - with the bloody RM9000 workarounds enabled - * the signal trampolines is moving to the end of the structure so we can - * increase the alignment without breaking software compatibility. - */ -#if ICACHE_REFILLS_WORKAROUND_WAR == 0 - -struct sigframe { - u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_code[2]; /* signal trampoline */ - struct sigcontext sf_sc; - sigset_t sf_mask; -}; - -#else /* ICACHE_REFILLS_WORKAROUND_WAR */ - -struct sigframe { - u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_pad[2]; - struct sigcontext sf_sc; /* hw context */ - sigset_t sf_mask; - u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ -}; - -#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ - /* * Determine which stack to use.. */ diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 54398af2371f..e7b04928caec 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -36,8 +36,20 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +/* + * Horribly complicated - with the bloody RM9000 workarounds enabled + * the signal trampolines is moving to the end of the structure so we can + * increase the alignment without breaking software compatibility. + */ #if ICACHE_REFILLS_WORKAROUND_WAR == 0 +struct sigframe { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_code[2]; /* signal trampoline */ + struct sigcontext sf_sc; + sigset_t sf_mask; +}; + struct rt_sigframe { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_code[2]; /* signal trampoline */ @@ -47,6 +59,14 @@ struct rt_sigframe { #else +struct sigframe { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_pad[2]; + struct sigcontext sf_sc; /* hw context */ + sigset_t sf_mask; + u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ +}; + struct rt_sigframe { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_pad[2]; -- cgit v1.2.2 From 24c556e99ec8a61ce1fbc75bee61dc19edf2c4df Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Fri, 9 Feb 2007 16:07:37 +0100 Subject: [MIPS] signals: make common _BLOCKABLE macro Signed-off-by: Franck Bui-Huu Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal-common.h | 2 ++ arch/mips/kernel/signal.c | 2 -- arch/mips/kernel/signal32.c | 2 -- arch/mips/kernel/signal_n32.c | 2 -- 4 files changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index b95e542ace27..fdbdbdc65b54 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -19,6 +19,8 @@ # define DEBUGP(fmt, args...) #endif +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + /* * Determine which stack to use.. */ diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index e7b04928caec..b2e9ab1bb101 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -34,8 +34,6 @@ #include "signal-common.h" -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - /* * Horribly complicated - with the bloody RM9000 workarounds enabled * the signal trampolines is moving to the end of the structure so we can diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 1b9262d3fd23..db00c333bff3 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -104,8 +104,6 @@ typedef struct compat_siginfo { #define __NR_O32_rt_sigreturn 4193 #define __NR_O32_restart_syscall 4253 -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - /* 32-bit compatibility types */ #define _NSIG_BPW32 32 diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index b17ef04691e3..1a5f248faf3b 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -47,8 +47,6 @@ #define __NR_N32_rt_sigreturn 6211 #define __NR_N32_restart_syscall 6214 -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); -- cgit v1.2.2 From d01f06ef0c783eceb53030fc5407caa94586bd6a Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 12 Feb 2007 23:48:26 +0900 Subject: [MIPS] DECstation: Fix irq handling When I post a patch (commit f431baa55abf8adeed0c718b51deacbc151f58f1), I just tried to not change behavior of existing codes, but it seems dec/int-handler.S had been broken since its previous commit 937a801576f954bd030d7c4a5a94571710d87c0b. The caller of plat_irq_dispatch do setup/restore TI_REGS($28), so dec's plat_irq_dispatch should not do it, and there is no need to adjust RA. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/dec/int-handler.S | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index b251ef864c33..00cecdcc75f2 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -264,9 +264,6 @@ srlv t3,t1,t2 handle_it: - LONG_L s0, TI_REGS($28) - LONG_S sp, TI_REGS($28) - PTR_LA ra, ret_from_irq j dec_irq_dispatch nop @@ -277,7 +274,6 @@ fpu: #endif spurious: - PTR_LA ra, _ret_from_irq j spurious_interrupt nop END(plat_irq_dispatch) -- cgit v1.2.2 From cb66fb3f156b485b22db97db22e96db4786dc68b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 11:45:24 +0000 Subject: [MIPS] 32-bit: Fix warning about cast for fetching pointer from userspace. Signed-off-by: Ralf Baechle --- include/asm-mips/uaccess.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h index c12ebc53ef31..36b3a427f123 100644 --- a/include/asm-mips/uaccess.h +++ b/include/asm-mips/uaccess.h @@ -265,7 +265,10 @@ do { \ */ #define __get_user_asm_ll32(val, addr) \ { \ - unsigned long long __gu_tmp; \ + union { \ + unsigned long long l; \ + __typeof__(*(addr)) t; \ + } __gu_tmp; \ \ __asm__ __volatile__( \ "1: lw %1, (%3) \n" \ @@ -281,9 +284,10 @@ do { \ " " __UA_ADDR " 1b, 4b \n" \ " " __UA_ADDR " 2b, 4b \n" \ " .previous \n" \ - : "=r" (__gu_err), "=&r" (__gu_tmp) \ + : "=r" (__gu_err), "=&r" (__gu_tmp.l) \ : "0" (0), "r" (addr), "i" (-EFAULT)); \ - (val) = (__typeof__(*(addr))) __gu_tmp; \ + \ + (val) = __gu_tmp.t; \ } /* -- cgit v1.2.2 From 6f3aa38e191326a82d5dcae1f6cdc88b1d9a8d32 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 15:01:21 +0000 Subject: [MIPS] Remove stray instruction from __get_user_asm_ll32. This did result in double clearing of the error return value on success only but should make a meassurable overhead for sigreturn. Signed-off-by: Ralf Baechle --- include/asm-mips/uaccess.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/asm-mips/uaccess.h b/include/asm-mips/uaccess.h index 36b3a427f123..3eff8d8fe28a 100644 --- a/include/asm-mips/uaccess.h +++ b/include/asm-mips/uaccess.h @@ -273,7 +273,6 @@ do { \ __asm__ __volatile__( \ "1: lw %1, (%3) \n" \ "2: lw %D1, 4(%3) \n" \ - " move %0, $0 \n" \ "3: .section .fixup,\"ax\" \n" \ "4: li %0, %4 \n" \ " move %1, $0 \n" \ -- cgit v1.2.2 From 7da8a581f5ec0ecac5f0afc9ec26ce13b780d48d Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Tue, 13 Feb 2007 14:50:18 +0100 Subject: [MIPS] Make entry.S a little more readable. When CONFIG_PREEMPT is not set, it also moves one branch instruction from ret_from_irq() to ret_from_exception(). Therefore we favour the return from irq case which should be more common than the other one. Signed-off-by: Franck Bui-Huu Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index f10b6a19f8bf..0b78fcbf044a 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -21,24 +21,21 @@ #endif #ifndef CONFIG_PREEMPT - .macro preempt_stop - local_irq_disable - .endm #define resume_kernel restore_all +#else +#define __ret_from_irq ret_from_exception #endif .text .align 5 -FEXPORT(ret_from_irq) - LONG_S s0, TI_REGS($28) -#ifdef CONFIG_PREEMPT -FEXPORT(ret_from_exception) -#else - b _ret_from_irq +#ifndef CONFIG_PREEMPT FEXPORT(ret_from_exception) - preempt_stop + local_irq_disable # preempt stop + b __ret_from_irq #endif -FEXPORT(_ret_from_irq) +FEXPORT(ret_from_irq) + LONG_S s0, TI_REGS($28) +FEXPORT(__ret_from_irq) LONG_L t0, PT_STATUS(sp) # returning to kernel mode? andi t0, t0, KU_USER beqz t0, resume_kernel -- cgit v1.2.2 From 366d6aef281a670b32a51d289fc07bf0e5e72d9a Mon Sep 17 00:00:00 2001 From: Andrew Sharp Date: Fri, 9 Feb 2007 17:35:28 -0800 Subject: [MIPS] Fix uniprocessor Sibyte builds. Signed-off-by: Andrew Sharp Signed-off-by: Ralf Baechle --- arch/mips/mm/c-sb1.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index 3a8afd47feaa..9ea460b16bda 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -259,6 +259,12 @@ static void sb1_flush_cache_data_page(unsigned long addr) on_each_cpu(sb1_flush_cache_data_page_ipi, (void *) addr, 1, 1); } #else + +static void local_sb1_flush_cache_data_page(unsigned long addr) +{ + __sb1_writeback_inv_dcache_range(addr, addr + PAGE_SIZE); +} + void sb1_flush_cache_data_page(unsigned long) __attribute__((alias("local_sb1_flush_cache_data_page"))); #endif -- cgit v1.2.2 From 431dc8040354db65e4f8d4d4e21ae4fab41f5bc3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Feb 2007 00:05:11 +0000 Subject: [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code. Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 47 ++++++++++++++++++++++++++++++++++ arch/mips/kernel/scall64-64.S | 2 +- arch/mips/kernel/scall64-n32.S | 2 +- arch/mips/kernel/signal32.c | 11 +++++--- arch/mips/kernel/signal_n32.c | 7 ++--- include/asm-mips/compat-signal.h | 55 ++++++++++++++++++++++++++++++++++++++++ 6 files changed, 115 insertions(+), 9 deletions(-) create mode 100644 include/asm-mips/compat-signal.h diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index ca7ad78f4def..fc4dd6c9dd80 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -39,6 +39,7 @@ #include #include +#include #include #include #include @@ -736,3 +737,49 @@ _sys32_clone(nabi_no_regargs struct pt_regs regs) return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr); } + +/* + * Implement the event wait interface for the eventpoll file. It is the kernel + * part of the user space epoll_pwait(2). + */ +asmlinkage long compat_sys_epoll_pwait(int epfd, + struct epoll_event __user *events, int maxevents, int timeout, + const compat_sigset_t __user *sigmask, size_t sigsetsize) +{ + int error; + sigset_t ksigmask, sigsaved; + + /* + * If the caller wants a certain signal mask to be set during the wait, + * we apply it here. + */ + if (sigmask) { + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + if (!access_ok(VERIFY_READ, sigmask, sizeof(ksigmask))) + return -EFAULT; + if (__copy_conv_sigset_from_user(&ksigmask, sigmask)) + return -EFAULT; + sigdelsetmask(&ksigmask, sigmask(SIGKILL) | sigmask(SIGSTOP)); + sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved); + } + + error = sys_epoll_wait(epfd, events, maxevents, timeout); + + /* + * If we changed the signal mask, we need to restore the original one. + * In case we've got a signal while waiting, we do not restore the + * signal mask yet, and we allow do_signal() to deliver the signal on + * the way back to userspace, before the signal mask is restored. + */ + if (sigmask) { + if (error == -EINTR) { + memcpy(¤t->saved_sigmask, &sigsaved, + sizeof(sigsaved)); + set_thread_flag(TIF_RESTORE_SIGMASK); + } else + sigprocmask(SIG_SETMASK, &sigsaved, NULL); + } + + return error; +} diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index e569b846e9a3..10e9a18630aa 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -470,4 +470,4 @@ sys_call_table: PTR sys_get_robust_list PTR sys_kexec_load /* 5270 */ PTR sys_getcpu - PTR sys_epoll_pwait + PTR compat_sys_epoll_pwait diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index ee8802b59758..2ceda4644a4d 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -396,4 +396,4 @@ EXPORT(sysn32_call_table) PTR compat_sys_get_robust_list PTR compat_sys_kexec_load PTR sys_getcpu - PTR sys_epoll_pwait + PTR compat_sys_epoll_pwait diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index db00c333bff3..c28cb21514c8 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -8,6 +8,7 @@ * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #include +#include #include #include #include @@ -24,6 +25,7 @@ #include #include +#include #include #include #include @@ -517,7 +519,7 @@ asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) frame = (struct sigframe32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked))) + if (__copy_conv_sigset_from_user(&blocked, &frame->sf_mask)) goto badframe; sigdelsetmask(&blocked, ~_BLOCKABLE); @@ -554,7 +556,7 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) frame = (struct rt_sigframe32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set))) + if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask)) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); @@ -609,7 +611,8 @@ int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, err |= install_sigtramp(frame->sf_code, __NR_O32_sigreturn); err |= setup_sigcontext32(regs, &frame->sf_sc); - err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->sf_mask, set); + if (err) goto give_sigsegv; @@ -668,7 +671,7 @@ int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, err |= __put_user(current->sas_ss_size, &frame->rs_uc.uc_stack.ss_size); err |= setup_sigcontext32(regs, &frame->rs_uc.uc_mcontext); - err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set); if (err) goto give_sigsegv; diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 1a5f248faf3b..7ca2a078841f 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -31,6 +31,7 @@ #include #include +#include #include #include #include @@ -63,7 +64,7 @@ struct ucontextn32 { s32 uc_link; stack32_t uc_stack; struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ + compat_sigset_t uc_sigmask; /* mask last for extensibility */ }; #if ICACHE_REFILLS_WORKAROUND_WAR == 0 @@ -129,7 +130,7 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) frame = (struct rt_sigframe_n32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set))) + if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask)) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); @@ -195,7 +196,7 @@ int setup_rt_frame_n32(struct k_sigaction * ka, err |= __put_user(current->sas_ss_size, &frame->rs_uc.uc_stack.ss_size); err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext); - err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set); if (err) goto give_sigsegv; diff --git a/include/asm-mips/compat-signal.h b/include/asm-mips/compat-signal.h new file mode 100644 index 000000000000..672077084aa1 --- /dev/null +++ b/include/asm-mips/compat-signal.h @@ -0,0 +1,55 @@ +#ifndef __ASM_COMPAT_SIGNAL_H +#define __ASM_COMPAT_SIGNAL_H + +#include +#include +#include + +static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d, + const sigset_t *s) +{ + int err; + + BUG_ON(sizeof(*d) != sizeof(*s)); + BUG_ON(_NSIG_WORDS != 2); + + err = __put_user(s->sig[0], &d->sig[0]); + err |= __put_user(s->sig[0] >> 32, &d->sig[1]); + err |= __put_user(s->sig[1], &d->sig[2]); + err |= __put_user(s->sig[1] >> 32, &d->sig[3]); + + return err; +} + +static inline int __copy_conv_sigset_from_user(sigset_t *d, + const compat_sigset_t __user *s) +{ + int err; + union sigset_u { + sigset_t s; + compat_sigset_t c; + } *u = (union sigset_u *) d; + + BUG_ON(sizeof(*d) != sizeof(*s)); + BUG_ON(_NSIG_WORDS != 2); + + if (unlikely(!access_ok(VERIFY_READ, d, sizeof(*d)))) + return -EFAULT; + +#ifdef CONFIG_CPU_BIG_ENDIAN + err = __get_user(u->c.sig[1], &s->sig[0]); + err |= __get_user(u->c.sig[0], &s->sig[1]); + err |= __get_user(u->c.sig[3], &s->sig[2]); + err |= __get_user(u->c.sig[2], &s->sig[3]); +#endif +#ifdef CONFIG_CPU_LITTLE_ENDIAN + err = __get_user(u->c.sig[0], &s->sig[0]); + err |= __get_user(u->c.sig[1], &s->sig[1]); + err |= __get_user(u->c.sig[2], &s->sig[2]); + err |= __get_user(u->c.sig[3], &s->sig[3]); +#endif + + return err; +} + +#endif /* __ASM_COMPAT_SIGNAL_H */ -- cgit v1.2.2 From 7f1f86a0d04e79f8165e6f50d329a520b8cd11e5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 13 Feb 2007 14:38:58 -0700 Subject: [PATCH] Fix SAK_work workqueue initialization. Somewhere in the rewrite of the work queues my cleanup of SAK handling got broken. Maybe I didn't retest it properly or possibly the API was changing so fast I missed something. Regardless currently triggering a SAK now generates an ugly BUG_ON and kills the kernel. Thanks to Alexey Dobriyan for spotting this. This modifies the use of SAK_work to initialize it when the data structure it resides in is initialized, and to simply call schedule_work when we need to generate a SAK. I update both data structures that have a SAK_work member for consistency. All of the old PREPARE_WORK calls that are now gone. If we call schedule_work again before it has processed it has generated the first SAK it will simply ignore the duplicate schedule_work request. Signed-off-by: Eric W. Biederman Signed-off-by: Linus Torvalds --- drivers/char/keyboard.c | 1 - drivers/char/sysrq.c | 1 - drivers/char/tty_io.c | 3 +-- drivers/char/vt.c | 1 + 4 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index c654a3e0c697..cb8d691576da 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -596,7 +596,6 @@ static void fn_spawn_con(struct vc_data *vc) static void fn_SAK(struct vc_data *vc) { struct work_struct *SAK_work = &vc_cons[fg_console].SAK_work; - PREPARE_WORK(SAK_work, vc_SAK); schedule_work(SAK_work); } diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index 3757610b7835..be73c80d699d 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -89,7 +89,6 @@ static struct sysrq_key_op sysrq_loglevel_op = { static void sysrq_handle_SAK(int key, struct tty_struct *tty) { struct work_struct *SAK_work = &vc_cons[fg_console].SAK_work; - PREPARE_WORK(SAK_work, vc_SAK); schedule_work(SAK_work); } static struct sysrq_key_op sysrq_SAK_op = { diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 65672c57470b..5289254e7ab3 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -3442,7 +3442,6 @@ void do_SAK(struct tty_struct *tty) { if (!tty) return; - PREPARE_WORK(&tty->SAK_work, do_SAK_work); schedule_work(&tty->SAK_work); } @@ -3568,7 +3567,7 @@ static void initialize_tty_struct(struct tty_struct *tty) mutex_init(&tty->atomic_write_lock); spin_lock_init(&tty->read_lock); INIT_LIST_HEAD(&tty->tty_files); - INIT_WORK(&tty->SAK_work, NULL); + INIT_WORK(&tty->SAK_work, do_SAK_work); } /* diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 94ce3e7fc9e4..c3f8e383933b 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -2635,6 +2635,7 @@ static int __init con_init(void) */ for (currcons = 0; currcons < MIN_NR_CONSOLES; currcons++) { vc_cons[currcons].d = vc = alloc_bootmem(sizeof(struct vc_data)); + INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); visual_init(vc, currcons, 1); vc->vc_screenbuf = (unsigned short *)alloc_bootmem(vc->vc_screenbuf_size); vc->vc_kmalloced = 0; -- cgit v1.2.2 From 577830b034bc11c93d4b9e21e8782900d5485e7f Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:33:51 +1100 Subject: [POWERPC] Consolidate pseries platform header files into pseries.h Following the example of platforms/pasemi, consolidate a couple of tiny header files in platforms/pseries into pseries.h. This gives us a convenient place to put things that need to be available to the platform code, but not public. And hopefully will help people resist the temptation of sticking externs in C files. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/firmware.h | 17 ----------------- arch/powerpc/platforms/pseries/pseries.h | 20 ++++++++++++++++++++ arch/powerpc/platforms/pseries/ras.c | 2 +- arch/powerpc/platforms/pseries/ras.h | 9 --------- arch/powerpc/platforms/pseries/setup.c | 4 ++-- 5 files changed, 23 insertions(+), 29 deletions(-) delete mode 100644 arch/powerpc/platforms/pseries/firmware.h create mode 100644 arch/powerpc/platforms/pseries/pseries.h delete mode 100644 arch/powerpc/platforms/pseries/ras.h diff --git a/arch/powerpc/platforms/pseries/firmware.h b/arch/powerpc/platforms/pseries/firmware.h deleted file mode 100644 index 714f56f55362..000000000000 --- a/arch/powerpc/platforms/pseries/firmware.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2006 IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _PSERIES_FIRMWARE_H -#define _PSERIES_FIRMWARE_H - -#include - -extern void __init fw_feature_init(void); - -#endif /* _PSERIES_FIRMWARE_H */ diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h new file mode 100644 index 000000000000..37618cb896cb --- /dev/null +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -0,0 +1,20 @@ +/* + * Copyright 2006 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PSERIES_PSERIES_H +#define _PSERIES_PSERIES_H + +extern void __init fw_feature_init(void); + +struct pt_regs; + +extern int pSeries_system_reset_exception(struct pt_regs *regs); +extern int pSeries_machine_check_exception(struct pt_regs *regs); + +#endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index b1d3d161249e..edc038873113 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -51,7 +51,7 @@ #include #include -#include "ras.h" +#include "pseries.h" static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(ras_log_buf_lock); diff --git a/arch/powerpc/platforms/pseries/ras.h b/arch/powerpc/platforms/pseries/ras.h deleted file mode 100644 index 0e66b0da55e2..000000000000 --- a/arch/powerpc/platforms/pseries/ras.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _PSERIES_RAS_H -#define _PSERIES_RAS_H - -struct pt_regs; - -extern int pSeries_system_reset_exception(struct pt_regs *regs); -extern int pSeries_machine_check_exception(struct pt_regs *regs); - -#endif /* _PSERIES_RAS_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 042ecae107ac..a28264ce1044 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -65,10 +65,10 @@ #include #include #include +#include #include "plpar_wrappers.h" -#include "ras.h" -#include "firmware.h" +#include "pseries.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) -- cgit v1.2.2 From 8feaeca23ab8f520e7af2a862fd6ea8e7bfd8854 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:33:55 +1100 Subject: [POWERPC] Cleanup pseries smp initialisation code Move some extern declarations from setup.c into the new pseries.h. While we're at it, provide dummy implementations for !SMP, to avoid cluttering the C file with more #ifdefs. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/pseries.h | 8 ++++++++ arch/powerpc/platforms/pseries/setup.c | 6 ------ arch/powerpc/platforms/pseries/smp.c | 1 + 3 files changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 37618cb896cb..36c791572682 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -17,4 +17,12 @@ struct pt_regs; extern int pSeries_system_reset_exception(struct pt_regs *regs); extern int pSeries_machine_check_exception(struct pt_regs *regs); +#ifdef CONFIG_SMP +extern void smp_init_pseries_mpic(void); +extern void smp_init_pseries_xics(void); +#else +static inline smp_init_pseries_mpic(void) { }; +static inline smp_init_pseries_xics(void) { }; +#endif + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index a28264ce1044..769815680be1 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -77,8 +77,6 @@ #endif /* move those away to a .h */ -extern void smp_init_pseries_mpic(void); -extern void smp_init_pseries_xics(void); extern void find_udbg_vterm(void); int fwnmi_active; /* TRUE if an FWNMI handler is present */ @@ -272,18 +270,14 @@ static void __init pseries_discover_pic(void) #ifdef CONFIG_KEXEC ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; #endif -#ifdef CONFIG_SMP smp_init_pseries_mpic(); -#endif return; } else if (strstr(typep, "ppc-xicp")) { ppc_md.init_IRQ = xics_init_IRQ; #ifdef CONFIG_KEXEC ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; #endif -#ifdef CONFIG_SMP smp_init_pseries_xics(); -#endif return; } } diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 4408518eaebe..116305b22a2b 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -48,6 +48,7 @@ #include #include "plpar_wrappers.h" +#include "pseries.h" #ifdef DEBUG #include -- cgit v1.2.2 From dce623e0827e8d0ad60ce7f385c3394bf1b0bae0 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:33:55 +1100 Subject: [POWERPC] Cleanup pseries kexec code Move all the pseries kexec code into one file, platforms/pseries/kexec.c Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't have to have #ifdef CONFIG_KEXEC in setup.c Move the initialisation of the ppc_md kexec callbacks into an init routine. This is well and truly early enough to cause no change in behaviour, we can't kexec until userspace has given us a kernel to kexec into. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/Makefile | 1 + arch/powerpc/platforms/pseries/kexec.c | 72 ++++++++++++++++++++++++++++++++ arch/powerpc/platforms/pseries/pseries.h | 8 ++++ arch/powerpc/platforms/pseries/setup.c | 50 +--------------------- 4 files changed, 83 insertions(+), 48 deletions(-) create mode 100644 arch/powerpc/platforms/pseries/kexec.c diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 69590fbf83da..dc0583bdbc63 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o +obj-$(CONFIG_KEXEC) += kexec.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c new file mode 100644 index 000000000000..af2685607458 --- /dev/null +++ b/arch/powerpc/platforms/pseries/kexec.c @@ -0,0 +1,72 @@ +/* + * Copyright 2006 Michael Ellerman, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#include "pseries.h" +#include "xics.h" +#include "plpar_wrappers.h" + +static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) +{ + /* Don't risk a hypervisor call if we're crashing */ + if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { + unsigned long addr; + + addr = __pa(get_slb_shadow()); + if (unregister_slb_shadow(hard_smp_processor_id(), addr)) + printk("SLB shadow buffer deregistration of " + "cpu %u (hw_cpu_id %d) failed\n", + smp_processor_id(), + hard_smp_processor_id()); + + addr = __pa(get_lppaca()); + if (unregister_vpa(hard_smp_processor_id(), addr)) { + printk("VPA deregistration of cpu %u (hw_cpu_id %d) " + "failed\n", smp_processor_id(), + hard_smp_processor_id()); + } + } +} + +static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary) +{ + pseries_kexec_cpu_down(crash_shutdown, secondary); + mpic_teardown_this_cpu(secondary); +} + +void __init setup_kexec_cpu_down_mpic(void) +{ + ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; +} + +static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary) +{ + pseries_kexec_cpu_down(crash_shutdown, secondary); + xics_teardown_cpu(secondary); +} + +void __init setup_kexec_cpu_down_xics(void) +{ + ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; +} + +static int __init pseries_kexec_setup(void) +{ + ppc_md.machine_kexec = default_machine_kexec; + ppc_md.machine_kexec_prepare = default_machine_kexec_prepare; + ppc_md.machine_crash_shutdown = default_machine_crash_shutdown; + + return 0; +} +__initcall(pseries_kexec_setup); diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 36c791572682..b43f1397a5b6 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -25,4 +25,12 @@ static inline smp_init_pseries_mpic(void) { }; static inline smp_init_pseries_xics(void) { }; #endif +#ifdef CONFIG_KEXEC +extern void setup_kexec_cpu_down_xics(void); +extern void setup_kexec_cpu_down_mpic(void); +#else +static inline setup_kexec_cpu_down_xics(void) { }; +static inline setup_kexec_cpu_down_mpic(void) { }; +#endif + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 769815680be1..435a04596526 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -55,7 +55,6 @@ #include #include #include -#include #include #include #include "xics.h" @@ -219,42 +218,6 @@ static void pseries_lpar_enable_pmcs(void) get_lppaca()->pmcregs_in_use = 1; } -#ifdef CONFIG_KEXEC -static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) -{ - /* Don't risk a hypervisor call if we're crashing */ - if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { - unsigned long addr; - - addr = __pa(get_slb_shadow()); - if (unregister_slb_shadow(hard_smp_processor_id(), addr)) - printk("SLB shadow buffer deregistration of " - "cpu %u (hw_cpu_id %d) failed\n", - smp_processor_id(), - hard_smp_processor_id()); - - addr = __pa(get_lppaca()); - if (unregister_vpa(hard_smp_processor_id(), addr)) { - printk("VPA deregistration of cpu %u (hw_cpu_id %d) " - "failed\n", smp_processor_id(), - hard_smp_processor_id()); - } - } -} - -static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary) -{ - pseries_kexec_cpu_down(crash_shutdown, secondary); - mpic_teardown_this_cpu(secondary); -} - -static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary) -{ - pseries_kexec_cpu_down(crash_shutdown, secondary); - xics_teardown_cpu(secondary); -} -#endif /* CONFIG_KEXEC */ - static void __init pseries_discover_pic(void) { struct device_node *np; @@ -267,16 +230,12 @@ static void __init pseries_discover_pic(void) pSeries_mpic_node = of_node_get(np); ppc_md.init_IRQ = pseries_mpic_init_IRQ; ppc_md.get_irq = mpic_get_irq; -#ifdef CONFIG_KEXEC - ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; -#endif + setup_kexec_cpu_down_mpic(); smp_init_pseries_mpic(); return; } else if (strstr(typep, "ppc-xicp")) { ppc_md.init_IRQ = xics_init_IRQ; -#ifdef CONFIG_KEXEC - ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; -#endif + setup_kexec_cpu_down_xics(); smp_init_pseries_xics(); return; } @@ -548,9 +507,4 @@ define_machine(pseries) { .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, -#ifdef CONFIG_KEXEC - .machine_kexec = default_machine_kexec, - .machine_kexec_prepare = default_machine_kexec_prepare, - .machine_crash_shutdown = default_machine_crash_shutdown, -#endif }; -- cgit v1.2.2 From 775aeff44774c6933d8f9c14e1f325d8acd03136 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 Feb 2007 18:34:04 +1100 Subject: [POWERPC] Move MPIC smp routines into mpic.c Move a couple of MPIC smp routines into mpic.c, they're inside an SMP block in mpic.c - so they're still only built for SMP. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/smp.c | 23 ----------------------- arch/powerpc/sysdev/mpic.c | 21 +++++++++++++++++++++ 2 files changed, 21 insertions(+), 23 deletions(-) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0e8beca460af..924d692bc8f9 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -78,29 +78,6 @@ int smt_enabled_at_boot = 1; static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL; -#ifdef CONFIG_MPIC -int __init smp_mpic_probe(void) -{ - int nr_cpus; - - DBG("smp_mpic_probe()...\n"); - - nr_cpus = cpus_weight(cpu_possible_map); - - DBG("nr_cpus: %d\n", nr_cpus); - - if (nr_cpus > 1) - mpic_request_ipis(); - - return nr_cpus; -} - -void __devinit smp_mpic_setup_cpu(int cpu) -{ - mpic_setup_this_cpu(); -} -#endif /* CONFIG_MPIC */ - #ifdef CONFIG_PPC64 void __devinit smp_generic_kick_cpu(int nr) { diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index aa701cc27ecc..4e54a09dd33b 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1395,4 +1395,25 @@ void smp_mpic_message_pass(int target, int msg) break; } } + +int __init smp_mpic_probe(void) +{ + int nr_cpus; + + DBG("smp_mpic_probe()...\n"); + + nr_cpus = cpus_weight(cpu_possible_map); + + DBG("nr_cpus: %d\n", nr_cpus); + + if (nr_cpus > 1) + mpic_request_ipis(); + + return nr_cpus; +} + +void __devinit smp_mpic_setup_cpu(int cpu) +{ + mpic_setup_this_cpu(); +} #endif /* CONFIG_SMP */ -- cgit v1.2.2 From 8d38a5b2fab1397d35ba1c92828a91b77ce9f865 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 13 Feb 2007 21:35:38 +0100 Subject: [POWERPC] Open Firmware serial port driver This can be used for serial ports that are connected to an OF platform bus but are not autodetected by the lecacy serial support. It will automatically take over devices that come from the legacy serial detection, which usually is only one device. In some cases, rtas may be set up to use the serial port in the firmware, which allows easier debugging before probing the serial ports. In this case, the "used-by-rtas" property must be set by the firmware. This patch also adds code to the legacy serial driver to check for this. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/legacy_serial.c | 15 ++++ drivers/serial/Kconfig | 10 +++ drivers/serial/Makefile | 1 + drivers/serial/of_serial.c | 143 ++++++++++++++++++++++++++++++++++++ 4 files changed, 169 insertions(+) create mode 100644 drivers/serial/of_serial.c diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 89f46f377922..325f490a10cc 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -124,6 +124,10 @@ static int __init add_legacy_soc_port(struct device_node *np, if (get_property(np, "clock-frequency", NULL) == NULL) return -1; + /* if rtas uses this device, don't try to use it as well */ + if (get_property(np, "used-by-rtas", NULL) != NULL) + return -1; + /* Get the address */ addrp = of_get_address(soc_dev, 0, NULL, NULL); if (addrp == NULL) @@ -334,6 +338,17 @@ void __init find_legacy_serial_ports(void) of_node_put(tsi); } + /* First fill our array with opb bus ports */ + for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16750")) != NULL;) { + struct device_node *opb = of_get_parent(np); + if (opb && !strcmp(opb->type, "opb")) { + index = add_legacy_soc_port(np, np); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } + of_node_put(opb); + } + #ifdef CONFIG_PCI /* Next, try to locate PCI ports */ for (np = NULL; (np = of_find_all_nodes(np));) { diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 5cc6b91f8408..d0edbaacb1f7 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -999,4 +999,14 @@ config SERIAL_NETX_CONSOLE If you have enabled the serial port on the Motorola IMX CPU you can make it the console by answering Y to this option. +config SERIAL_OF_PLATFORM + tristate "Serial port on Open Firmware platform bus" + depends on PPC_OF + depends on SERIAL_8250 + help + If you have a PowerPC based system that has serial ports + on a platform specific bus, you should enable this option. + Currently, only 8250 compatible ports are supported, but + others can easily be added. + endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index df3632cd7df9..f3f82587b5fa 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -58,3 +58,4 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o +obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c new file mode 100644 index 000000000000..09b0b736a751 --- /dev/null +++ b/drivers/serial/of_serial.c @@ -0,0 +1,143 @@ +/* + * Serial Port driver for Open Firmware platform devices + * + * Copyright (C) 2006 Arnd Bergmann , IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#include +#include +#include +#include + +#include +#include + +/* + * Fill a struct uart_port for a given device node + */ +static int __devinit of_platform_serial_setup(struct of_device *ofdev, + int type, struct uart_port *port) +{ + struct resource resource; + struct device_node *np = ofdev->node; + const unsigned int *clk, *spd; + int ret; + + memset(port, 0, sizeof *port); + spd = get_property(np, "current-speed", NULL); + clk = get_property(np, "clock-frequency", NULL); + if (!clk) { + dev_warn(&ofdev->dev, "no clock-frequency property set\n"); + return -ENODEV; + } + + ret = of_address_to_resource(np, 0, &resource); + if (ret) { + dev_warn(&ofdev->dev, "invalid address\n"); + return ret; + } + + spin_lock_init(&port->lock); + port->mapbase = resource.start; + port->irq = irq_of_parse_and_map(np, 0); + port->iotype = UPIO_MEM; + port->type = type; + port->uartclk = *clk; + port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP; + port->dev = &ofdev->dev; + port->custom_divisor = *clk / (16 * (*spd)); + + return 0; +} + +/* + * Try to register a serial port + */ +static int __devinit of_platform_serial_probe(struct of_device *ofdev, + const struct of_device_id *id) +{ + struct uart_port port; + int port_type; + int ret; + + if (of_find_property(ofdev->node, "used-by-rtas", NULL)) + return -EBUSY; + + port_type = (unsigned long)id->data; + ret = of_platform_serial_setup(ofdev, port_type, &port); + if (ret) + goto out; + + switch (port_type) { + case PORT_UNKNOWN: + dev_info(&ofdev->dev, "Unknown serial port found, " + "attempting to use 8250 driver\n"); + /* fallthrough */ + case PORT_8250 ... PORT_MAX_8250: + ret = serial8250_register_port(&port); + break; + default: + /* need to add code for these */ + ret = -ENODEV; + break; + } + if (ret < 0) + goto out; + + ofdev->dev.driver_data = (void *)(unsigned long)ret; + return 0; +out: + irq_dispose_mapping(port.irq); + return ret; +} + +/* + * Release a line + */ +static int of_platform_serial_remove(struct of_device *ofdev) +{ + int line = (unsigned long)ofdev->dev.driver_data; + serial8250_unregister_port(line); + return 0; +} + +/* + * A few common types, add more as needed. + */ +static struct of_device_id __devinitdata of_platform_serial_table[] = { + { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, + { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, + { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, + { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, + { .type = "serial", .data = (void *)PORT_UNKNOWN, }, + { /* end of list */ }, +}; + +static struct of_platform_driver __devinitdata of_platform_serial_driver = { + .owner = THIS_MODULE, + .name = "of_serial", + .probe = of_platform_serial_probe, + .remove = of_platform_serial_remove, + .match_table = of_platform_serial_table, +}; + +static int __init of_platform_serial_init(void) +{ + return of_register_platform_driver(&of_platform_serial_driver); +} +module_init(of_platform_serial_init); + +static void __exit of_platform_serial_exit(void) +{ + return of_unregister_platform_driver(&of_platform_serial_driver); +}; +module_exit(of_platform_serial_exit); + +MODULE_AUTHOR("Arnd Bergmann "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices"); -- cgit v1.2.2 From 719c91ccadd3ed26570dbb29d54166914832eee9 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 13 Feb 2007 15:54:22 +1100 Subject: [POWERPC] Use udbg_early_init() on ppc32 udbg_early_init() is a function used on 64 bit systems, which initializes whichever early udbg backend is configured. This function is not called on 32-bit, however if btext early debug is enabled it does have an explicit, inline, #ifdef-ed assignment performing analagous initialization. This patch makes things more uniform by folding the btext initialization as an option into udbg_early_init() and calling that from the 32-bit setup path. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/btext.c | 9 +++++++++ arch/powerpc/kernel/setup_32.c | 8 ++------ arch/powerpc/kernel/udbg.c | 2 ++ include/asm-powerpc/udbg.h | 1 + 4 files changed, 14 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 93f21aaf7c8e..3678997339d6 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -18,6 +18,7 @@ #include #include #include +#include #define NO_SCROLL @@ -912,3 +913,11 @@ static unsigned char vga_font[cmapsz] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; + +void __init udbg_init_btext(void) +{ + /* If btext is enabled, we might have a BAT setup for early display, + * thus we do enable some very basic udbg output + */ + udbg_putc = btext_drawchar; +} diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 6a19fa40dcee..44a6a3c47feb 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -116,12 +116,8 @@ unsigned long __init early_init(unsigned long dt_ptr) */ void __init machine_init(unsigned long dt_ptr, unsigned long phys) { - /* If btext is enabled, we might have a BAT setup for early display, - * thus we do enable some very basic udbg output - */ -#ifdef CONFIG_BOOTX_TEXT - udbg_putc = btext_drawchar; -#endif + /* Enable early debugging if any specified (see udbg.h) */ + udbg_early_init(); /* Do some early initialization based on the flat device tree */ early_init_devtree(__va(dt_ptr)); diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 194a93eeb3e7..7e0971868fc2 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -49,6 +49,8 @@ void __init udbg_early_init(void) udbg_init_debug_beat(); #elif defined(CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE) udbg_init_pas_realmode(); +#elif defined(CONFIG_BOOTX_TEXT) + udbg_init_btext(); #endif } diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h index 4cbc313aa02a..d03d8557f706 100644 --- a/include/asm-powerpc/udbg.h +++ b/include/asm-powerpc/udbg.h @@ -46,6 +46,7 @@ extern void __init udbg_init_iseries(void); extern void __init udbg_init_rtas_panel(void); extern void __init udbg_init_rtas_console(void); extern void __init udbg_init_debug_beat(void); +extern void __init udbg_init_btext(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_UDBG_H */ -- cgit v1.2.2 From 8af18971584d1e05770560206cfdfd1d6ba8a17f Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 14 Feb 2007 04:42:51 +0000 Subject: [CIFS] on reconnect to Samba - reset the unix capabilities After temporary server or network failure and reconneciton, we were not resending the unix capabilities via SetFSInfo - which confused Samba posix byte range locking code. Discovered by jra Signed-off-by: Steve French --- fs/Kconfig | 29 +++++------- fs/cifs/CHANGES | 7 ++- fs/cifs/TODO | 8 ++++ fs/cifs/cifsfs.h | 2 +- fs/cifs/cifspdu.h | 2 +- fs/cifs/cifsproto.h | 3 ++ fs/cifs/cifssmb.c | 16 ++++++- fs/cifs/connect.c | 130 ++++++++++++++++++++++++++++++++++------------------ 8 files changed, 130 insertions(+), 67 deletions(-) diff --git a/fs/Kconfig b/fs/Kconfig index 8cd2417a14db..d57f363ea1ab 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1871,20 +1871,14 @@ config CIFS file servers such as Windows 2000 (including Windows 2003, NT 4 and Windows XP) as well by Samba (which provides excellent CIFS server support for Linux and many other operating systems). Limited - support for Windows ME and similar servers is provided as well. - You must use the smbfs client filesystem to access older SMB servers - such as OS/2 and DOS. + support for OS/2 and Windows ME and similar servers is provided as well. The intent of the cifs module is to provide an advanced - network file system client for mounting to CIFS compliant servers, + network file system client for mounting to CIFS compliant servers, including support for dfs (hierarchical name space), secure per-user session establishment, safe distributed caching (oplock), optional - packet signing, Unicode and other internationalization improvements, - and optional Winbind (nsswitch) integration. You do not need to enable - cifs if running only a (Samba) server. It is possible to enable both - smbfs and cifs (e.g. if you are using CIFS for accessing Windows 2003 - and Samba 3 servers, and smbfs for accessing old servers). If you need - to mount to Samba or Windows from this machine, say Y. + packet signing, Unicode and other internationalization improvements. + If you need to mount to Samba or Windows from this machine, say Y. config CIFS_STATS bool "CIFS statistics" @@ -1977,14 +1971,13 @@ config CIFS_EXPERIMENTAL depends on CIFS && EXPERIMENTAL help Enables cifs features under testing. These features are - experimental and currently include support for writepages - (multipage writebehind performance improvements) and directory - change notification ie fcntl(F_DNOTIFY) as well as some security - improvements. Some also depend on setting at runtime the - pseudo-file /proc/fs/cifs/Experimental (which is disabled by - default). See the file fs/cifs/README for more details. - - If unsure, say N. + experimental and currently include DFS support and directory + change notification ie fcntl(F_DNOTIFY), as well as the upcall + mechanism which will be used for Kerberos session negotiation + and uid remapping. Some of these features also may depend on + setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental + (which is disabled by default). See the file fs/cifs/README + for more details. If unsure, say N. config CIFS_UPCALL bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)" diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index a1fb03f19637..5fe13593b57f 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -4,7 +4,12 @@ Fix oops in list_del during mount caused by unaligned string. Fix file corruption which could occur on some large file copies caused by writepages page i/o completion bug. Seek to SEEK_END forces check for update of file size for non-cached -files. +files. Allow file size to be updated on remote extend of locally open, +non-cached file. Fix reconnect to newer Samba servers (or other servers +which support the CIFS Unix/POSIX extensions) so that we again tell the +server the Unix/POSIX cifs capabilities which we support (SetFSInfo). +Add experimental support for new POSIX Open/Mkdir (which returns +stat information on the open, and allows setting the mode). Version 1.46 ------------ diff --git a/fs/cifs/TODO b/fs/cifs/TODO index fc34c74ec4be..68372946dc92 100644 --- a/fs/cifs/TODO +++ b/fs/cifs/TODO @@ -128,3 +128,11 @@ negotiated size) and send larger write sizes to modern servers. 4) More exhaustively test against less common servers. More testing against Windows 9x, Windows ME servers. + +DOS attrs - returned as pseudo-xattr in Samba format (check VFAT and NTFS for this too) + +mount check for unmatched uids - and uid override + +Add mount option for Linux extension disable per mount, and partial disable per mount (uid off, symlink/fifo/mknod on but what about posix acls?) + +Free threads at umount --force that are stuck on the sesSem diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index 8aa66dcf13bd..e36b0d43e909 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -100,5 +100,5 @@ extern ssize_t cifs_getxattr(struct dentry *, const char *, void *, size_t); extern ssize_t cifs_listxattr(struct dentry *, char *, size_t); extern int cifs_ioctl (struct inode * inode, struct file * filep, unsigned int command, unsigned long arg); -#define CIFS_VERSION "1.47" +#define CIFS_VERSION "1.48" #endif /* _CIFSFS_H */ diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 529a000bee46..7d9505491b16 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -2108,7 +2108,7 @@ typedef struct { typedef struct { /* reply varies based on requested level */ -} __atribute__((packed)) OPEN_PSX_RSP; /* level 0x209 SetPathInfo data */ +} __attribute__((packed)) OPEN_PSX_RSP; /* level 0x209 SetPathInfo data */ struct file_internal_info { diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 1108f17bf550..6148b82170c4 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -23,6 +23,7 @@ #include struct statfs; +struct smb_vol; /* ***************************************************************** @@ -147,6 +148,8 @@ extern int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, unsigned int *pnum_referrals, unsigned char ** preferrals, int remap); +extern void reset_cifs_unix_caps(int xid, struct cifsTconInfo *tcon, + struct super_block * sb, struct smb_vol * vol); extern int CIFSSMBQFSInfo(const int xid, struct cifsTconInfo *tcon, struct kstatfs *FSData); extern int SMBOldQFSInfo(const int xid, struct cifsTconInfo *tcon, diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 472e33e0f3cf..b8e91470c27f 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -158,9 +158,15 @@ small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, nls_codepage); if(!rc && (tcon->tidStatus == CifsNeedReconnect)) { mark_open_files_invalid(tcon); - rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon - , nls_codepage); + rc = CIFSTCon(0, tcon->ses, tcon->treeName, + tcon, nls_codepage); up(&tcon->ses->sesSem); + /* tell server which Unix caps we support */ + if (tcon->ses->capabilities & CAP_UNIX) + reset_cifs_unix_caps(0 /* no xid */, + tcon, + NULL /* we do not know sb */, + NULL /* no vol info */); /* BB FIXME add code to check if wsize needs update due to negotiated smb buffer size shrinking */ @@ -298,6 +304,12 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon, nls_codepage); up(&tcon->ses->sesSem); + /* tell server which Unix caps we support */ + if (tcon->ses->capabilities & CAP_UNIX) + reset_cifs_unix_caps(0 /* no xid */, + tcon, + NULL /* do not know sb */, + NULL /* no vol info */); /* BB FIXME add code to check if wsize needs update due to negotiated smb buffer size shrinking */ diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 2caca06b4bae..20ba7dcc9959 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1613,6 +1613,76 @@ ipv6_connect(struct sockaddr_in6 *psin_server, struct socket **csocket) return rc; } +void reset_cifs_unix_caps(int xid, struct cifsTconInfo * tcon, + struct super_block * sb, struct smb_vol * vol_info) +{ + /* if we are reconnecting then should we check to see if + * any requested capabilities changed locally e.g. via + * remount but we can not do much about it here + * if they have (even if we could detect it by the following) + * Perhaps we could add a backpointer to array of sb from tcon + * or if we change to make all sb to same share the same + * sb as NFS - then we only have one backpointer to sb. + * What if we wanted to mount the server share twice once with + * and once without posixacls or posix paths? */ + __u64 saved_cap = le64_to_cpu(tcon->fsUnixInfo.Capability); + + + if(!CIFSSMBQFSUnixInfo(xid, tcon)) { + __u64 cap = le64_to_cpu(tcon->fsUnixInfo.Capability); + + /* check for reconnect case in which we do not + want to change the mount behavior if we can avoid it */ + if(vol_info == NULL) { + /* turn off POSIX ACL and PATHNAMES if not set + originally at mount time */ + if ((saved_cap & CIFS_UNIX_POSIX_ACL_CAP) == 0) + cap &= ~CIFS_UNIX_POSIX_ACL_CAP; + if ((saved_cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) == 0) + cap &= ~CIFS_UNIX_POSIX_PATHNAMES_CAP; + + + + + } + + cap &= CIFS_UNIX_CAP_MASK; + if(vol_info && vol_info->no_psx_acl) + cap &= ~CIFS_UNIX_POSIX_ACL_CAP; + else if(CIFS_UNIX_POSIX_ACL_CAP & cap) { + cFYI(1,("negotiated posix acl support")); + if(sb) + sb->s_flags |= MS_POSIXACL; + } + + if(vol_info && vol_info->posix_paths == 0) + cap &= ~CIFS_UNIX_POSIX_PATHNAMES_CAP; + else if(cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) { + cFYI(1,("negotiate posix pathnames")); + if(sb) + CIFS_SB(sb)->mnt_cifs_flags |= + CIFS_MOUNT_POSIX_PATHS; + } + + cFYI(1,("Negotiate caps 0x%x",(int)cap)); +#ifdef CONFIG_CIFS_DEBUG2 + if(cap & CIFS_UNIX_FCNTL_CAP) + cFYI(1,("FCNTL cap")); + if(cap & CIFS_UNIX_EXTATTR_CAP) + cFYI(1,("EXTATTR cap")); + if(cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) + cFYI(1,("POSIX path cap")); + if(cap & CIFS_UNIX_XATTR_CAP) + cFYI(1,("XATTR cap")); + if(cap & CIFS_UNIX_POSIX_ACL_CAP) + cFYI(1,("POSIX ACL cap")); +#endif /* CIFS_DEBUG2 */ + if (CIFSSMBSetFSUnixInfo(xid, tcon, cap)) { + cFYI(1,("setting capabilities failed")); + } + } +} + int cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, char *mount_data, const char *devname) @@ -1928,20 +1998,25 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (tcon == NULL) rc = -ENOMEM; else { - /* check for null share name ie connect to dfs root */ + /* check for null share name ie connecting to + * dfs root */ - /* BB check if this works for exactly length three strings */ + /* BB check if this works for exactly length + * three strings */ if ((strchr(volume_info.UNC + 3, '\\') == NULL) && (strchr(volume_info.UNC + 3, '/') == NULL)) { rc = connect_to_dfs_path(xid, pSesInfo, - "", cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + "", cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); kfree(volume_info.UNC); FreeXid(xid); return -ENODEV; } else { + /* BB Do we need to wrap sesSem around + * this TCon call and Unix SetFS as + * we do on SessSetup and reconnect? */ rc = CIFSTCon(xid, pSesInfo, volume_info.UNC, tcon, cifs_sb->local_nls); @@ -1962,6 +2037,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, sb->s_maxbytes = (u64) 1 << 31; /* 2 GB */ } + /* BB FIXME fix time_gran to be larger for LANMAN sessions */ sb->s_time_gran = 100; /* on error free sesinfo and tcon struct if needed */ @@ -2006,45 +2082,11 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* do not care if following two calls succeed - informational */ CIFSSMBQFSDeviceInfo(xid, tcon); CIFSSMBQFSAttributeInfo(xid, tcon); - - if (tcon->ses->capabilities & CAP_UNIX) { - if(!CIFSSMBQFSUnixInfo(xid, tcon)) { - __u64 cap = - le64_to_cpu(tcon->fsUnixInfo.Capability); - cap &= CIFS_UNIX_CAP_MASK; - if(volume_info.no_psx_acl) - cap &= ~CIFS_UNIX_POSIX_ACL_CAP; - else if(CIFS_UNIX_POSIX_ACL_CAP & cap) { - cFYI(1,("negotiated posix acl support")); - sb->s_flags |= MS_POSIXACL; - } - - if(volume_info.posix_paths == 0) - cap &= ~CIFS_UNIX_POSIX_PATHNAMES_CAP; - else if(cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) { - cFYI(1,("negotiate posix pathnames")); - cifs_sb->mnt_cifs_flags |= - CIFS_MOUNT_POSIX_PATHS; - } - - cFYI(1,("Negotiate caps 0x%x",(int)cap)); -#ifdef CONFIG_CIFS_DEBUG2 - if(cap & CIFS_UNIX_FCNTL_CAP) - cFYI(1,("FCNTL cap")); - if(cap & CIFS_UNIX_EXTATTR_CAP) - cFYI(1,("EXTATTR cap")); - if(cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) - cFYI(1,("POSIX path cap")); - if(cap & CIFS_UNIX_XATTR_CAP) - cFYI(1,("XATTR cap")); - if(cap & CIFS_UNIX_POSIX_ACL_CAP) - cFYI(1,("POSIX ACL cap")); -#endif /* CIFS_DEBUG2 */ - if (CIFSSMBSetFSUnixInfo(xid, tcon, cap)) { - cFYI(1,("setting capabilities failed")); - } - } - } + + /* tell server which Unix caps we support */ + if (tcon->ses->capabilities & CAP_UNIX) + reset_cifs_unix_caps(xid, tcon, sb, &volume_info); + if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X)) cifs_sb->wsize = min(cifs_sb->wsize, (tcon->ses->server->maxBuf - -- cgit v1.2.2