From ab6ad5a4875e99dffe957a411fe890402a91f67f Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 12 Aug 2009 08:24:29 +0000 Subject: bnx2x: Whitespaces and comments Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x.h | 38 ++++++++-------- drivers/net/bnx2x_link.c | 115 ++++++++++++++++++++++++----------------------- drivers/net/bnx2x_main.c | 80 +++++++++++++++++---------------- drivers/net/bnx2x_reg.h | 3 +- 4 files changed, 121 insertions(+), 115 deletions(-) diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 97bc5e046f47..bbf842284ebb 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -314,9 +314,11 @@ struct bnx2x_fastpath { __le16 *rx_cons_sb; __le16 *rx_bd_cons_sb; + unsigned long tx_pkt, rx_pkt, rx_calls; + /* TPA related */ struct sw_rx_bd tpa_pool[ETH_MAX_AGGREGATION_QUEUES_E1H]; u8 tpa_state[ETH_MAX_AGGREGATION_QUEUES_E1H]; @@ -998,20 +1000,20 @@ struct bnx2x { #define GUNZIP_PHYS(bp) (bp->gunzip_mapping) #define GUNZIP_OUTLEN(bp) (bp->gunzip_outlen) - struct raw_op *init_ops; + struct raw_op *init_ops; /* Init blocks offsets inside init_ops */ - u16 *init_ops_offsets; + u16 *init_ops_offsets; /* Data blob - has 32 bit granularity */ - u32 *init_data; + u32 *init_data; /* Zipped PRAM blobs - raw data */ - const u8 *tsem_int_table_data; - const u8 *tsem_pram_data; - const u8 *usem_int_table_data; - const u8 *usem_pram_data; - const u8 *xsem_int_table_data; - const u8 *xsem_pram_data; - const u8 *csem_int_table_data; - const u8 *csem_pram_data; + const u8 *tsem_int_table_data; + const u8 *tsem_pram_data; + const u8 *usem_int_table_data; + const u8 *usem_pram_data; + const u8 *xsem_int_table_data; + const u8 *xsem_pram_data; + const u8 *csem_int_table_data; + const u8 *csem_pram_data; #define INIT_OPS(bp) (bp->init_ops) #define INIT_OPS_OFFSETS(bp) (bp->init_ops_offsets) #define INIT_DATA(bp) (bp->init_data) @@ -1024,7 +1026,7 @@ struct bnx2x { #define INIT_CSEM_INT_TABLE_DATA(bp) (bp->csem_int_table_data) #define INIT_CSEM_PRAM_DATA(bp) (bp->csem_pram_data) - const struct firmware *firmware; + const struct firmware *firmware; }; @@ -1111,9 +1113,9 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, #define DMAE_COMP_VAL 0xe0d0d0ae #define MAX_DMAE_C_PER_PORT 8 -#define INIT_DMAE_C(bp) (BP_PORT(bp)*MAX_DMAE_C_PER_PORT + \ +#define INIT_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ BP_E1HVN(bp)) -#define PMF_DMAE_C(bp) (BP_PORT(bp)*MAX_DMAE_C_PER_PORT + \ +#define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ E1HVN_MAX) @@ -1138,7 +1140,8 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, /* must be used on a CID before placing it on a HW ring */ -#define HW_CID(bp, x) ((BP_PORT(bp) << 23) | (BP_E1HVN(bp) << 17) | x) +#define HW_CID(bp, x) ((BP_PORT(bp) << 23) | \ + (BP_E1HVN(bp) << 17) | (x)) #define SP_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_spe)) #define MAX_SP_DESC_CNT (SP_DESC_CNT - 1) @@ -1226,8 +1229,8 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR | \ AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR | \ AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR | \ - AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR |\ - AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR |\ + AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR |\ AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR | \ AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR | \ AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR | \ @@ -1255,7 +1258,6 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY | \ (bp->multi_mode << \ TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_MODE_SHIFT)) - #define MULTI_MASK 0x7f diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index c2b001031e7b..e32d3370862e 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -182,6 +182,7 @@ static void bnx2x_set_serdes_access(struct link_params *params) { struct bnx2x *bp = params->bp; u32 emac_base = (params->port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + /* Set Clause 22 */ REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 1); REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000); @@ -194,6 +195,7 @@ static void bnx2x_set_serdes_access(struct link_params *params) static void bnx2x_set_phy_mdio(struct link_params *params, u8 phy_flags) { struct bnx2x *bp = params->bp; + if (phy_flags & PHY_XGXS_FLAG) { REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + params->port*0x18, 0); @@ -465,7 +467,6 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars, REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, wb_data, 2); - /* set rx mtu */ wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; wb_data[1] = 0; @@ -684,6 +685,7 @@ void bnx2x_link_status_update(struct link_params *params, static void bnx2x_update_mng(struct link_params *params, u32 link_status) { struct bnx2x *bp = params->bp; + REG_WR(bp, params->shmem_base + offsetof(struct shmem_region, port_mb[params->port].link_status), @@ -780,7 +782,6 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", line_speed); return -EINVAL; - break; } } REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd); @@ -800,6 +801,7 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, static u32 bnx2x_get_emac_base(struct bnx2x *bp, u32 ext_phy_type, u8 port) { u32 emac_base; + switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: @@ -905,7 +907,7 @@ u8 bnx2x_cl45_read(struct bnx2x *bp, u8 port, u32 ext_phy_type, val = saved_mode & ((EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT)); val |= (EMAC_MDIO_MODE_CLAUSE_45 | - (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); + (49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); udelay(40); @@ -1535,14 +1537,14 @@ static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result) } } -static u8 bnx2x_ext_phy_resove_fc(struct link_params *params, +static u8 bnx2x_ext_phy_resolve_fc(struct link_params *params, struct link_vars *vars) { struct bnx2x *bp = params->bp; u8 ext_phy_addr; - u16 ld_pause; /* local */ - u16 lp_pause; /* link partner */ - u16 an_complete; /* AN complete */ + u16 ld_pause; /* local */ + u16 lp_pause; /* link partner */ + u16 an_complete; /* AN complete */ u16 pause_result; u8 ret = 0; u32 ext_phy_type; @@ -1642,7 +1644,7 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params, DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result); bnx2x_pause_resolve(vars, pause_result); } else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) && - (bnx2x_ext_phy_resove_fc(params, vars))) { + (bnx2x_ext_phy_resolve_fc(params, vars))) { return; } else { if (params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) @@ -1784,7 +1786,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, "link speed unsupported gp_status 0x%x\n", gp_status); return -EINVAL; - break; + case GP_STATUS_10G_KX4: case GP_STATUS_10G_HIG: case GP_STATUS_10G_CX4: @@ -1821,8 +1823,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, DP(NETIF_MSG_LINK, "link speed unsupported gp_status 0x%x\n", gp_status); - return -EINVAL; - break; + return -EINVAL; } /* Upon link speed change set the NIG into drain mode. @@ -2061,16 +2062,17 @@ static void bnx2x_ext_phy_reset(struct link_params *params, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); - break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + DP(NETIF_MSG_LINK, "XGXS 8072\n"); + /* Unset Low Power Mode and SW reset */ /* Restore normal power mode*/ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - DP(NETIF_MSG_LINK, "XGXS 8072\n"); bnx2x_cl45_write(bp, params->port, ext_phy_type, ext_phy_addr, @@ -2078,8 +2080,9 @@ static void bnx2x_ext_phy_reset(struct link_params *params, MDIO_PMA_REG_CTRL, 1<<15); break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073: - { + DP(NETIF_MSG_LINK, "XGXS 8073\n"); /* Restore normal power mode*/ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, @@ -2089,9 +2092,6 @@ static void bnx2x_ext_phy_reset(struct link_params *params, bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - - DP(NETIF_MSG_LINK, "XGXS 8073\n"); - } break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: @@ -2107,7 +2107,6 @@ static void bnx2x_ext_phy_reset(struct link_params *params, break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: - /* Restore normal power mode*/ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, MISC_REGISTERS_GPIO_OUTPUT_HIGH, @@ -2146,20 +2145,18 @@ static void bnx2x_ext_phy_reset(struct link_params *params, break; default: - DP(NETIF_MSG_LINK, - "BAD SerDes ext_phy_config 0x%x\n", + DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n", params->ext_phy_config); break; } } } - static void bnx2x_save_spirom_version(struct bnx2x *bp, u8 port, u32 shmem_base, u32 spirom_ver) { - DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x\n", - (u16)(spirom_ver>>16), (u16)spirom_ver); + DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x for port %d\n", + (u16)(spirom_ver>>16), (u16)spirom_ver, port); REG_WR(bp, shmem_base + offsetof(struct shmem_region, port_mb[port].ext_phy_fw_version), @@ -2171,6 +2168,7 @@ static void bnx2x_save_bcm_spirom_ver(struct bnx2x *bp, u8 port, u32 shmem_base) { u16 fw_ver1, fw_ver2; + bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER1, &fw_ver1); bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD, @@ -2423,7 +2421,6 @@ static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params) } DP(NETIF_MSG_LINK, "Warning: XAUI work-around timeout !!!\n"); return -EINVAL; - } static void bnx2x_bcm8073_bcm8727_external_rom_boot(struct bnx2x *bp, u8 port, @@ -2565,6 +2562,7 @@ static void bnx2x_sfp_set_transmitter(struct bnx2x *bp, u8 port, u8 tx_en) { u16 val; + DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x\n", tx_en, port); /* Disable/Enable transmitter ( TX laser of the SFP+ module.)*/ @@ -2597,6 +2595,7 @@ static u8 bnx2x_8726_read_sfp_module_eeprom(struct link_params *params, u8 port = params->port; u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); + if (byte_cnt > 16) { DP(NETIF_MSG_LINK, "Reading from eeprom is" " is limited to 0xf\n"); @@ -2808,6 +2807,7 @@ static u8 bnx2x_get_edc_mode(struct link_params *params, case SFP_EEPROM_CON_TYPE_VAL_COPPER: { u8 copper_module_type; + /* Check if its active cable( includes SFP+ module) of passive cable*/ if (bnx2x_read_sfp_module_eeprom(params, @@ -2842,7 +2842,6 @@ static u8 bnx2x_get_edc_mode(struct link_params *params, DP(NETIF_MSG_LINK, "Optic module detected\n"); check_limiting_mode = 1; break; - default: DP(NETIF_MSG_LINK, "Unable to determine module type 0x%x !!!\n", val); @@ -3169,6 +3168,7 @@ void bnx2x_handle_module_detect_int(struct link_params *params) struct bnx2x *bp = params->bp; u32 gpio_val; u8 port = params->port; + /* Set valid module led off */ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, MISC_REGISTERS_GPIO_HIGH, @@ -3236,6 +3236,7 @@ static void bnx2x_bcm807x_force_10G(struct link_params *params) MDIO_AN_REG_CTRL, 0x0000); } + static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params) { struct bnx2x *bp = params->bp; @@ -3303,7 +3304,6 @@ static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params) static void bnx2x_8073_set_pause_cl37(struct link_params *params, struct link_vars *vars) { - struct bnx2x *bp = params->bp; u16 cl37_val; u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); @@ -3535,6 +3535,7 @@ static void bnx2x_init_internal_phy(struct link_params *params, u8 enable_cl73) { struct bnx2x *bp = params->bp; + if (!(vars->phy_flags & PHY_SGMII_FLAG)) { if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && @@ -3585,6 +3586,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) u16 ctrl = 0; u16 val = 0; u8 rc = 0; + if (vars->phy_flags & PHY_XGXS_FLAG) { ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); @@ -3881,14 +3883,12 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_8073_set_pause_cl37(params, vars); if (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072){ + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) bnx2x_bcm8072_external_rom_boot(params); - } else { - + else /* In case of 8073 with long xaui lines, don't set the 8073 xaui low power*/ bnx2x_bcm8073_set_xaui_low_power_mode(params); - } bnx2x_cl45_read(bp, params->port, ext_phy_type, @@ -3953,10 +3953,8 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) ext_phy_addr, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, val); - if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) { - bnx2x_cl45_read(bp, params->port, ext_phy_type, ext_phy_addr, @@ -4290,7 +4288,6 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_save_spirom_version(params->bp, params->port, params->shmem_base, (u32)(fw_ver1<<16 | fw_ver2)); - break; } case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481: @@ -4621,6 +4618,7 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, u16 rx_sd, pcs_status; u8 ext_phy_link_up = 0; u8 port = params->port; + if (vars->phy_flags & PHY_XGXS_FLAG) { ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config); ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); @@ -4729,7 +4727,6 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, break; } } - if (val2 & (1<<1)) vars->line_speed = SPEED_1000; else @@ -4786,8 +4783,9 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, if ((val1 & (1<<8)) == 0) { DP(NETIF_MSG_LINK, "8727 Power fault" - " has been detected on port" - " %d\n", params->port); + " has been detected on " + "port %d\n", + params->port); printk(KERN_ERR PFX "Error: Power" " fault on %s Port %d has" " been detected and the" @@ -4894,6 +4892,7 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, { u16 link_status = 0; u16 an1000_status = 0; + if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) { bnx2x_cl45_read(bp, params->port, @@ -4909,7 +4908,6 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, DP(NETIF_MSG_LINK, "870x LASI status 0x%x->0x%x\n", val1, val2); - } else { /* In 8073, port1 is directed through emac0 and * port0 is directed through emac1 @@ -5039,8 +5037,6 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, MDIO_PMA_DEVAD, MDIO_PMA_REG_CDR_BANDWIDTH, 0x0333); - - } bnx2x_cl45_read(bp, params->port, ext_phy_type, @@ -5225,7 +5221,6 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params, ext_phy_addr); } } - break; default: DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", @@ -5272,6 +5267,7 @@ static void bnx2x_link_int_enable(struct link_params *params) u32 ext_phy_type; u32 mask; struct bnx2x *bp = params->bp; + /* setting the status to report on link up for either XGXS or SerDes */ @@ -5303,10 +5299,10 @@ static void bnx2x_link_int_enable(struct link_params *params) bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, mask); - DP(NETIF_MSG_LINK, "port %x, is_xgxs=%x, int_status 0x%x\n", port, + + DP(NETIF_MSG_LINK, "port %x, is_xgxs %x, int_status 0x%x\n", port, (params->switch_cfg == SWITCH_CFG_10G), REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4)); - DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n", REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), @@ -5738,6 +5734,7 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed, u8 rc = 0; u32 tmp; u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode); DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n", speed, hw_led_mode); @@ -5816,6 +5813,7 @@ static u8 bnx2x_link_initialize(struct link_params *params, u8 rc = 0; u8 non_ext_phy; u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); + /* Activate the external PHY */ bnx2x_ext_phy_reset(params, vars); @@ -5889,11 +5887,11 @@ static u8 bnx2x_link_initialize(struct link_params *params, u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) { struct bnx2x *bp = params->bp; - u32 val; - DP(NETIF_MSG_LINK, "Phy Initialization started \n"); - DP(NETIF_MSG_LINK, "req_speed = %d, req_flowctrl=%d\n", - params->req_line_speed, params->req_flow_ctrl); + + DP(NETIF_MSG_LINK, "Phy Initialization started\n"); + DP(NETIF_MSG_LINK, "req_speed %d, req_flowctrl %d\n", + params->req_line_speed, params->req_flow_ctrl); vars->link_status = 0; vars->phy_link_up = 0; vars->link_up = 0; @@ -5907,7 +5905,6 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) else vars->phy_flags = PHY_XGXS_FLAG; - /* disable attentions */ bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4, (NIG_MASK_XGXS0_LINK_STATUS | @@ -5918,6 +5915,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_emac_init(params, vars); if (CHIP_REV_IS_FPGA(bp)) { + vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; @@ -5926,7 +5924,8 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) /* enable on E1.5 FPGA */ if (CHIP_IS_E1H(bp)) { vars->flow_ctrl |= - (BNX2X_FLOW_CTRL_TX | BNX2X_FLOW_CTRL_RX); + (BNX2X_FLOW_CTRL_TX | + BNX2X_FLOW_CTRL_RX); vars->link_status |= (LINK_STATUS_TX_FLOW_CONTROL_ENABLED | LINK_STATUS_RX_FLOW_CONTROL_ENABLED); @@ -5935,8 +5934,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) bnx2x_emac_enable(params, vars, 0); bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed); /* disable drain */ - REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE - + params->port*4, 0); + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); /* update shared memory */ bnx2x_update_mng(params, vars->link_status); @@ -5966,6 +5964,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) } else if (params->loopback_mode == LOOPBACK_BMAC) { + vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; @@ -5980,7 +5979,9 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); + } else if (params->loopback_mode == LOOPBACK_EMAC) { + vars->link_up = 1; vars->line_speed = SPEED_1000; vars->duplex = DUPLEX_FULL; @@ -5996,8 +5997,10 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->duplex); REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); + } else if ((params->loopback_mode == LOOPBACK_XGXS_10) || - (params->loopback_mode == LOOPBACK_EXT_PHY)) { + (params->loopback_mode == LOOPBACK_EXT_PHY)) { + vars->link_up = 1; vars->line_speed = SPEED_10000; vars->duplex = DUPLEX_FULL; @@ -6034,7 +6037,6 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) } else /* No loopback */ { - bnx2x_phy_deassert(params, vars->phy_flags); switch (params->switch_cfg) { case SWITCH_CFG_1G: @@ -6042,8 +6044,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) if ((params->ext_phy_config & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) == PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482) { - vars->phy_flags |= - PHY_SGMII_FLAG; + vars->phy_flags |= PHY_SGMII_FLAG; } val = REG_RD(bp, @@ -6064,7 +6065,6 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars) default: DP(NETIF_MSG_LINK, "Invalid switch_cfg\n"); return -EINVAL; - break; } DP(NETIF_MSG_LINK, "Phy address = 0x%x\n", params->phy_addr); @@ -6089,7 +6089,6 @@ static void bnx2x_8726_reset_phy(struct bnx2x *bp, u8 port, u8 ext_phy_addr) u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, u8 reset_ext_phy) { - struct bnx2x *bp = params->bp; u32 ext_phy_config = params->ext_phy_config; u16 hw_led_mode = params->hw_led_mode; @@ -6102,7 +6101,6 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars, config)); /* disable attentions */ - vars->link_status = 0; bnx2x_update_mng(params, vars->link_status); bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, @@ -6198,6 +6196,7 @@ static u8 bnx2x_update_link_down(struct link_params *params, { struct bnx2x *bp = params->bp; u8 port = params->port; + DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port); bnx2x_set_led(bp, port, LED_MODE_OFF, 0, params->hw_led_mode, @@ -6234,6 +6233,7 @@ static u8 bnx2x_update_link_up(struct link_params *params, struct bnx2x *bp = params->bp; u8 port = params->port; u8 rc = 0; + vars->link_status |= LINK_STATUS_LINK_UP; if (link_10g) { bnx2x_bmac_enable(params, vars, 0); @@ -6547,6 +6547,7 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base) u8 ext_phy_addr; u32 val; s8 port; + /* Use port1 because of the static port-swap */ /* Enable the module detection interrupt */ val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN); diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 8b6bb999d8e0..466c447c5fe9 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -63,8 +63,8 @@ #include #include "bnx2x_fw_file_hdr.h" /* FW files */ -#define FW_FILE_PREFIX_E1 "bnx2x-e1-" -#define FW_FILE_PREFIX_E1H "bnx2x-e1h-" +#define FW_FILE_PREFIX_E1 "bnx2x-e1-" +#define FW_FILE_PREFIX_E1H "bnx2x-e1h-" /* Time in jiffies before concluding the transmitter is hung */ #define TX_TIMEOUT (5*HZ) @@ -723,7 +723,6 @@ static void bnx2x_int_disable(struct bnx2x *bp) REG_WR(bp, addr, val); if (REG_RD(bp, addr) != val) BNX2X_ERR("BUG! proper val not read from IGU!\n"); - } static void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw) @@ -1660,6 +1659,7 @@ reuse_rx: } skb_record_rx_queue(skb, fp->index); + #ifdef BCM_VLAN if ((bp->vlgrp != NULL) && (bp->flags & HW_VLAN_RX_FLAG) && (le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) & @@ -2418,14 +2418,12 @@ static void bnx2x_link_attn(struct bnx2x *bp) int func; int vn; + /* Set the attention towards other drivers on the same port */ for (vn = VN_0; vn < E1HVN_MAX; vn++) { if (vn == BP_E1HVN(bp)) continue; func = ((vn << 1) | port); - - /* Set the attention towards other drivers - on the same port */ REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 + (LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1); } @@ -2880,6 +2878,7 @@ static inline void bnx2x_fan_failure(struct bnx2x *bp) " damage. Please contact Dell Support for assistance\n", bp->dev->name); } + static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) { int port = BP_PORT(bp); @@ -7660,9 +7659,11 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; + /* Set "drop all" */ bp->rx_mode = BNX2X_RX_MODE_NONE; bnx2x_set_storm_rx_mode(bp); + /* Disable HW interrupts, NAPI and Tx */ bnx2x_netif_stop(bp, 1); del_timer_sync(&bp->timer); @@ -9158,8 +9159,7 @@ static int bnx2x_nway_reset(struct net_device *dev) return 0; } -static u32 -bnx2x_get_link(struct net_device *dev) +static u32 bnx2x_get_link(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); @@ -10169,7 +10169,7 @@ static int bnx2x_test_nvram(struct bnx2x *bp) __be32 buf[0x350 / 4]; u8 *data = (u8 *)buf; int i, rc; - u32 magic, csum; + u32 magic, crc; rc = bnx2x_nvram_read(bp, 0, data, 4); if (rc) { @@ -10194,10 +10194,10 @@ static int bnx2x_test_nvram(struct bnx2x *bp) goto test_nvram_exit; } - csum = ether_crc_le(nvram_tbl[i].size, data); - if (csum != CRC32_RESIDUAL) { + crc = ether_crc_le(nvram_tbl[i].size, data); + if (crc != CRC32_RESIDUAL) { DP(NETIF_MSG_PROBE, - "nvram_tbl[%d] csum value (0x%08x)\n", i, csum); + "nvram_tbl[%d] crc value (0x%08x)\n", i, crc); rc = -ENODEV; goto test_nvram_exit; } @@ -11771,17 +11771,17 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp) BCM_5710_FW_MINOR_VERSION, BCM_5710_FW_REVISION_VERSION, BCM_5710_FW_ENGINEERING_VERSION); - return -EINVAL; + return -EINVAL; } return 0; } -static void inline be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n) +static inline void be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n) { + const __be32 *source = (const __be32 *)_source; + u32 *target = (u32 *)_target; u32 i; - const __be32 *source = (const __be32*)_source; - u32 *target = (u32*)_target; for (i = 0; i < n/4; i++) target[i] = be32_to_cpu(source[i]); @@ -11791,66 +11791,67 @@ static void inline be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n) Ops array is stored in the following format: {op(8bit), offset(24bit, big endian), data(32bit, big endian)} */ -static void inline bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n) +static inline void bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n) { + const __be32 *source = (const __be32 *)_source; + struct raw_op *target = (struct raw_op *)_target; u32 i, j, tmp; - const __be32 *source = (const __be32*)_source; - struct raw_op *target = (struct raw_op*)_target; - for (i = 0, j = 0; i < n/8; i++, j+=2) { + for (i = 0, j = 0; i < n/8; i++, j += 2) { tmp = be32_to_cpu(source[j]); target[i].op = (tmp >> 24) & 0xff; target[i].offset = tmp & 0xffffff; target[i].raw_data = be32_to_cpu(source[j+1]); } } -static void inline be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n) + +static inline void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n) { + const __be16 *source = (const __be16 *)_source; + u16 *target = (u16 *)_target; u32 i; - u16 *target = (u16*)_target; - const __be16 *source = (const __be16*)_source; for (i = 0; i < n/2; i++) target[i] = be16_to_cpu(source[i]); } #define BNX2X_ALLOC_AND_SET(arr, lbl, func) \ - do { \ - u32 len = be32_to_cpu(fw_hdr->arr.len); \ - bp->arr = kmalloc(len, GFP_KERNEL); \ + do { \ + u32 len = be32_to_cpu(fw_hdr->arr.len); \ + bp->arr = kmalloc(len, GFP_KERNEL); \ if (!bp->arr) { \ - printk(KERN_ERR PFX "Failed to allocate %d bytes for "#arr"\n", len); \ + printk(KERN_ERR PFX "Failed to allocate %d bytes " \ + "for "#arr"\n", len); \ goto lbl; \ } \ - func(bp->firmware->data + \ - be32_to_cpu(fw_hdr->arr.offset), \ - (u8*)bp->arr, len); \ + func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \ + (u8 *)bp->arr, len); \ } while (0) - static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev) { char fw_file_name[40] = {0}; - int rc, offset; struct bnx2x_fw_file_hdr *fw_hdr; + int rc, offset; /* Create a FW file name */ if (CHIP_IS_E1(bp)) - offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1); + offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1); else offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1H); sprintf(fw_file_name + offset, "%d.%d.%d.%d.fw", BCM_5710_FW_MAJOR_VERSION, - BCM_5710_FW_MINOR_VERSION, - BCM_5710_FW_REVISION_VERSION, - BCM_5710_FW_ENGINEERING_VERSION); + BCM_5710_FW_MINOR_VERSION, + BCM_5710_FW_REVISION_VERSION, + BCM_5710_FW_ENGINEERING_VERSION); printk(KERN_INFO PFX "Loading %s\n", fw_file_name); rc = request_firmware(&bp->firmware, fw_file_name, dev); if (rc) { - printk(KERN_ERR PFX "Can't load firmware file %s\n", fw_file_name); + printk(KERN_ERR PFX "Can't load firmware file %s\n", + fw_file_name); goto request_firmware_exit; } @@ -11870,7 +11871,8 @@ static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev) BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops); /* Offsets */ - BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, be16_to_cpu_n); + BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, + be16_to_cpu_n); /* STORMs firmware */ INIT_TSEM_INT_TABLE_DATA(bp) = bp->firmware->data + @@ -11891,6 +11893,7 @@ static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev) be32_to_cpu(fw_hdr->csem_pram_data.offset); return 0; + init_offsets_alloc_err: kfree(bp->init_ops); init_ops_alloc_err: @@ -11902,7 +11905,6 @@ request_firmware_exit: } - static int __devinit bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index 95ebf3fb3e89..0695be14cf91 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -4561,7 +4561,8 @@ #define LATCHED_ATTN_SCPAD_PARITY_MCP 33 #define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32) -#define GENERAL_ATTEN_OFFSET(atten_name) (1 << ((94 + atten_name) % 32)) +#define GENERAL_ATTEN_OFFSET(atten_name)\ + (1UL << ((94 + atten_name) % 32)) /* * This file defines GRC base address for every block. * This file is included by chipsim, asm microcode and cpp microcode. -- cgit v1.2.2