From a21ee724034b21d51d74eec8e426702a627eb465 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 3 May 2010 22:43:04 +0200 Subject: rt2x00: Fix HT40+/HT40- setting in rt2800. Inspection of the Ralink vendor driver shows that the TX_BAND_CFG register and BBP register 3 are about HT40- indication, not about HT40+ indication. Inverse the meaning of these fields in the code. Signed-off-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800.h | 4 ++-- drivers/net/wireless/rt2x00/rt2800lib.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 4c0b48173213..2aa03751c341 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -845,7 +845,7 @@ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz */ #define TX_BAND_CFG 0x132c -#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001) +#define TX_BAND_CFG_HT40_MINUS FIELD32(0x00000001) #define TX_BAND_CFG_A FIELD32(0x00000002) #define TX_BAND_CFG_BG FIELD32(0x00000004) @@ -1519,7 +1519,7 @@ struct mac_iveiv_entry { * BBP 3: RX Antenna */ #define BBP3_RX_ANTENNA FIELD8(0x18) -#define BBP3_HT40_PLUS FIELD8(0x20) +#define BBP3_HT40_MINUS FIELD8(0x20) /* * BBP 4: Bandwidth diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 7310f34cc12a..6d2c66d9b290 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -867,7 +867,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, } rt2800_register_read(rt2x00dev, TX_BAND_CFG, ®); - rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2x00_set_field32(®, TX_BAND_CFG_HT40_MINUS, conf_is_ht40_minus(conf)); rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg); @@ -900,7 +900,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, rt2800_bbp_write(rt2x00dev, 4, bbp); rt2800_bbp_read(rt2x00dev, 3, &bbp); - rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2x00_set_field8(&bbp, BBP3_HT40_MINUS, conf_is_ht40_minus(conf)); rt2800_bbp_write(rt2x00dev, 3, bbp); if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) { -- cgit v1.2.2