From 9fbab5163aa8cb3a5aef845fbf67b0c1c85030b6 Mon Sep 17 00:00:00 2001 From: Ben Cahill Date: Thu, 29 Nov 2007 11:09:47 +0800 Subject: iwlwifi: clean up and clarify some comments after 3945/4965 split Clean up and clarify some comments after 3945/4965 split. Signed-off-by: Ben Cahill Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945-rs.h | 11 +- drivers/net/wireless/iwlwifi/iwl-4965-rs.h | 5 +- drivers/net/wireless/iwlwifi/iwl3945-base.c | 126 ++++++++------------- drivers/net/wireless/iwlwifi/iwl4965-base.c | 163 +++++++++++++--------------- 4 files changed, 132 insertions(+), 173 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.h b/drivers/net/wireless/iwlwifi/iwl-3945-rs.h index 075f7de0976e..e21a5bae687f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.h @@ -28,8 +28,8 @@ #define __iwl_3945_rs_h__ struct iwl3945_rate_info { - u8 plcp; - u8 ieee; + u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ + u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ u8 prev_ieee; /* previous rate in IEEE speeds */ u8 next_ieee; /* next rate in IEEE speeds */ u8 prev_rs; /* previous rate used in rs algo */ @@ -38,9 +38,12 @@ struct iwl3945_rate_info { u8 next_rs_tgg; /* next rate used in TGG rs algo */ u8 table_rs_index; /* index in rate scale table cmd */ u8 prev_table_rs; /* prev in rate table cmd */ - }; +/* + * These serve as indexes into + * struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT]; + */ enum { IWL_RATE_1M_INDEX = 0, IWL_RATE_2M_INDEX, @@ -96,6 +99,7 @@ enum { #define IWL_RATE_5M_MASK (1< #include #include @@ -75,9 +65,9 @@ static int iwl3945_tx_queue_update_write_ptr(struct iwl3945_priv *priv, /* module parameters */ static int iwl3945_param_disable_hw_scan; static int iwl3945_param_debug; -static int iwl3945_param_disable; /* def: enable radio */ -static int iwl3945_param_antenna; /* def: 0 = both antennas (use diversity) */ -int iwl3945_param_hwcrypto; /* def: using software encryption */ +static int iwl3945_param_disable; /* def: enable radio */ +static int iwl3945_param_antenna; /* def: 0 = both antennas (use diversity) */ +int iwl3945_param_hwcrypto; /* def: using software encryption */ static int iwl3945_param_qos_enable = 1; int iwl3945_param_queues_num = IWL_MAX_NUM_QUEUES; @@ -396,11 +386,7 @@ void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *t const u8 iwl3945_broadcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; /*************** STATION TABLE MANAGEMENT **** - * - * NOTE: This needs to be overhauled to better synchronize between - * how the iwl-4965.c is using iwl3945_hw_find_station vs. iwl-3945.c - * - * mac80211 should also be examined to determine if sta_info is duplicating + * mac80211 should be examined to determine if sta_info is duplicating * the functionality provided here */ @@ -956,12 +942,12 @@ static int iwl3945_check_rxon_cmd(struct iwl3945_rxon_cmd *rxon) } /** - * iwl3945_full_rxon_required - determine if RXON_ASSOC can be used in RXON commit + * iwl3945_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed * @priv: staging_rxon is compared to active_rxon * - * If the RXON structure is changing sufficient to require a new - * tune or to clear and reset the RXON_FILTER_ASSOC_MSK then return 1 - * to indicate a new tune is required. + * If the RXON structure is changing enough to require a new tune, + * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that + * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. */ static int iwl3945_full_rxon_required(struct iwl3945_priv *priv) { @@ -1235,7 +1221,7 @@ static int iwl3945_card_state_sync_callback(struct iwl3945_priv *priv, /* * CARD_STATE_CMD * - * Use: Sets the internal card state to enable, disable, or halt + * Use: Sets the device's internal card state to enable, disable, or halt * * When in the 'enable' state the card operates as normal. * When in the 'disable' state, the card enters into a low power mode. @@ -1589,14 +1575,9 @@ int iwl3945_eeprom_init(struct iwl3945_priv *priv) /** * iwl3945_report_frame - dump frame to syslog during debug sessions * - * hack this function to show different aspects of received frames, + * You may hack this function to show different aspects of received frames, * including selective frame dumps. * group100 parameter selects whether to show 1 out of 100 good frames. - * - * TODO: ieee80211_hdr stuff is common to 3945 and 4965, so frame type - * info output is okay, but some of this stuff (e.g. iwl3945_rx_frame_stats) - * is 3945-specific and gives bad output for 4965. Need to split the - * functionality, keep common stuff here. */ void iwl3945_report_frame(struct iwl3945_priv *priv, struct iwl3945_rx_packet *pkt, @@ -3775,13 +3756,10 @@ static void iwl3945_setup_rx_handlers(struct iwl3945_priv *priv) iwl3945_rx_pm_debug_statistics_notif; priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif; - /* NOTE: iwl3945_rx_statistics is different based on whether - * the build is for the 3945 or the 4965. See the - * corresponding implementation in iwl-XXXX.c - * - * The same handler is used for both the REPLY to a - * discrete statistics request from the host as well as - * for the periodic statistics notification from the uCode + /* + * The same handler is used for both the REPLY to a discrete + * statistics request from the host as well as for the periodic + * statistics notifications (after received beacons) from the uCode. */ priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_hw_rx_statistics; priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics; @@ -3795,7 +3773,7 @@ static void iwl3945_setup_rx_handlers(struct iwl3945_priv *priv) priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif; priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx; - /* Setup hardware specific Rx handlers */ + /* Set up hardware specific Rx handlers */ iwl3945_hw_rx_handler_setup(priv); } @@ -3867,10 +3845,10 @@ static void iwl3945_tx_cmd_complete(struct iwl3945_priv *priv, * The queue is empty (no good data) if WRITE = READ - 1, and is full if * WRITE = READ. * - * During initialization the host sets up the READ queue position to the first + * During initialization, the host sets up the READ queue position to the first * INDEX position, and WRITE to the last (READ - 1 wrapped) * - * When the firmware places a packet in a buffer it will advance the READ index + * When the firmware places a packet in a buffer, it will advance the READ index * and fire the RX interrupt. The driver can then query the READ index and * process as many packets as possible, moving the WRITE index forward as it * resets the Rx queue buffers with new memory. @@ -3892,16 +3870,16 @@ static void iwl3945_tx_cmd_complete(struct iwl3945_priv *priv, * * Driver sequence: * - * iwl3945_rx_queue_alloc() Allocates rx_free - * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls + * iwl3945_rx_queue_alloc() Allocates rx_free + * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls * iwl3945_rx_queue_restock - * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx + * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx * queue, updates firmware pointers, and updates * the WRITE index. If insufficient rx_free buffers * are available, schedules iwl3945_rx_replenish * * -- enable interrupts -- - * ISR - iwl3945_rx() Detach iwl3945_rx_mem_buffers from pool up to the + * ISR - iwl3945_rx() Detach iwl3945_rx_mem_buffers from pool up to the * READ INDEX, detaching the SKB from the pool. * Moves the packet buffer from queue to rx_used. * Calls iwl3945_rx_queue_restock to refill any empty @@ -3927,12 +3905,6 @@ static int iwl3945_rx_queue_space(const struct iwl3945_rx_queue *q) /** * iwl3945_rx_queue_update_write_ptr - Update the write pointer for the RX queue - * - * NOTE: This function has 3945 and 4965 specific code sections - * but is declared in base due to the majority of the - * implementation being the same (only a numeric constant is - * different) - * */ int iwl3945_rx_queue_update_write_ptr(struct iwl3945_priv *priv, struct iwl3945_rx_queue *q) { @@ -3973,9 +3945,7 @@ int iwl3945_rx_queue_update_write_ptr(struct iwl3945_priv *priv, struct iwl3945_ } /** - * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer pointer. - * - * NOTE: This function has 3945 and 4965 specific code paths in it. + * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr */ static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl3945_priv *priv, dma_addr_t dma_addr) @@ -3986,9 +3956,9 @@ static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl3945_priv *priv, /** * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool * - * If there are slots in the RX queue that need to be restocked, + * If there are slots in the RX queue that need to be restocked, * and we have free pre-allocated buffers, fill the ranks as much - * as we can pulling from rx_free. + * as we can, pulling from rx_free. * * This moves the 'write' index forward to catch up with 'processed', and * also updates the memory address in the firmware to reference the new @@ -4080,7 +4050,7 @@ void iwl3945_rx_replenish(void *data) } /* Assumes that the skb field of the buffers in 'pool' is kept accurate. - * If an SKB has been detached, the POOL needs to have it's SKB set to NULL + * If an SKB has been detached, the POOL needs to have its SKB set to NULL * This free routine walks the list of POOL entries and if SKB is set to * non NULL it is unmapped and freed */ @@ -4232,7 +4202,7 @@ int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm) } /** - * iwl3945_rx_handle - Main entry function for receiving responses from the uCode + * iwl3945_rx_handle - Main entry function for receiving responses from uCode * * Uses the priv->rx_handlers callback function array to invoke * the appropriate handlers, including command responses, @@ -4257,7 +4227,7 @@ static void iwl3945_rx_handle(struct iwl3945_priv *priv) while (i != r) { rxb = rxq->queue[i]; - /* If an RXB doesn't have a queue slot associated with it + /* If an RXB doesn't have a Rx queue slot associated with it, * then a bug has been introduced in the queue refilling * routines -- catch it here */ BUG_ON(rxb == NULL); @@ -4296,8 +4266,8 @@ static void iwl3945_rx_handle(struct iwl3945_priv *priv) } if (reclaim) { - /* Invoke any callbacks, transfer the skb to caller, - * and fire off the (possibly) blocking iwl3945_send_cmd() + /* Invoke any callbacks, transfer the skb to caller, and + * fire off the (possibly) blocking iwl3945_send_cmd() * as we reclaim the driver command queue */ if (rxb && rxb->skb) iwl3945_tx_cmd_complete(priv, rxb); @@ -4671,7 +4641,8 @@ static void iwl3945_irq_tasklet(struct iwl3945_priv *priv) #ifdef CONFIG_IWL3945_DEBUG if (iwl3945_debug_level & IWL_DL_ISR) { - inta_mask = iwl3945_read32(priv, CSR_INT_MASK); /* just for debug */ + /* just for debug */ + inta_mask = iwl3945_read32(priv, CSR_INT_MASK); IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, inta_mask, inta_fh); } @@ -4901,11 +4872,11 @@ static const u8 iwl3945_eeprom_band_1[14] = { }; /* 5.2 GHz bands */ -static const u8 iwl3945_eeprom_band_2[] = { +static const u8 iwl3945_eeprom_band_2[] = { /* 4915-5080MHz */ 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16 }; -static const u8 iwl3945_eeprom_band_3[] = { /* 5205-5320MHz */ +static const u8 iwl3945_eeprom_band_3[] = { /* 5170-5320MHz */ 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 }; @@ -4929,7 +4900,7 @@ static void iwl3945_init_band_reference(const struct iwl3945_priv *priv, int ban *eeprom_ch_info = priv->eeprom.band_1_channels; *eeprom_ch_index = iwl3945_eeprom_band_1; break; - case 2: /* 5.2GHz band */ + case 2: /* 4.9GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_2); *eeprom_ch_info = priv->eeprom.band_2_channels; *eeprom_ch_index = iwl3945_eeprom_band_2; @@ -4939,12 +4910,12 @@ static void iwl3945_init_band_reference(const struct iwl3945_priv *priv, int ban *eeprom_ch_info = priv->eeprom.band_3_channels; *eeprom_ch_index = iwl3945_eeprom_band_3; break; - case 4: /* 5.2GHz band */ + case 4: /* 5.5GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_4); *eeprom_ch_info = priv->eeprom.band_4_channels; *eeprom_ch_index = iwl3945_eeprom_band_4; break; - case 5: /* 5.2GHz band */ + case 5: /* 5.7GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_5); *eeprom_ch_info = priv->eeprom.band_5_channels; *eeprom_ch_index = iwl3945_eeprom_band_5; @@ -5207,7 +5178,7 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, int phymode, scan_ch->active_dwell = cpu_to_le16(active_dwell); scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - /* Set power levels to defaults */ + /* Set txpower levels to defaults */ scan_ch->tpc.dsp_atten = 110; /* scan_pwr_info->tpc.dsp_atten; */ @@ -5217,8 +5188,8 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, int phymode, else { scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level - scan_ch->tpc.tx_gain = ((1<<5) | (2 << 3)) | 3; + * power level: + * scan_ch->tpc.tx_gain = ((1<<5) | (2 << 3)) | 3; */ } @@ -5602,8 +5573,9 @@ static int iwl3945_verify_ucode(struct iwl3945_priv *priv) IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); - /* Show first several data entries in instruction SRAM. - * Selection of bootstrap image is arbitrary. */ + /* Since nothing seems to match, show first several data entries in + * instruction SRAM, so maybe visual inspection will give a clue. + * Selection of bootstrap image (vs. other images) is arbitrary. */ image = (__le32 *)priv->ucode_boot.v_addr; len = priv->ucode_boot.len; rc = iwl3945_verify_inst_full(priv, image, len); @@ -5695,7 +5667,7 @@ static int iwl3945_load_bsm(struct iwl3945_priv *priv) return -EINVAL; /* Tell bootstrap uCode where to find the "Initialize" uCode - * in host DRAM ... bits 31:0 for 3945, bits 35:4 for 4965. + * in host DRAM ... host DRAM physical address bits 31:0 for 3945. * NOTE: iwl3945_initialize_alive_start() will replace these values, * after the "initialize" uCode has run, to point to * runtime/protocol instructions and backup data cache. */ @@ -6020,12 +5992,8 @@ static int iwl3945_set_ucode_ptrs(struct iwl3945_priv *priv) * * Called after REPLY_ALIVE notification received from "initialize" uCode. * - * The 4965 "initialize" ALIVE reply contains calibration data for: - * Voltage, temperature, and MIMO tx gain correction, now stored in priv - * (3945 does not contain this data). - * * Tell "initialize" uCode to go ahead and load the runtime uCode. -*/ + */ static void iwl3945_init_alive_start(struct iwl3945_priv *priv) { /* Check alive response for "valid" sign from uCode */ @@ -6120,7 +6088,7 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv) } else set_bit(STATUS_RF_KILL_HW, &priv->status); - /* After the ALIVE response, we can process host commands */ + /* After the ALIVE response, we can send commands to 3945 uCode */ set_bit(STATUS_ALIVE, &priv->status); /* Clear out the uCode error bit if it is set */ @@ -6177,7 +6145,7 @@ static void iwl3945_alive_start(struct iwl3945_priv *priv) memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); } - /* Configure BT coexistence */ + /* Configure Bluetooth device coexistence support */ iwl3945_send_bt_config(priv); /* Configure the adapter for unassociated operation */ @@ -6365,7 +6333,7 @@ static int __iwl3945_up(struct iwl3945_priv *priv) /* start card; "initialize" will load runtime ucode */ iwl3945_nic_start(priv); - /* MAC Address location in EEPROM same for 3945/4965 */ + /* MAC Address location in EEPROM is same for 3945/4965 */ get_eeprom_mac(priv, priv->mac_addr); IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr)); diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 33eace757435..74c3d3917fe1 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -27,16 +27,6 @@ * *****************************************************************************/ -/* - * NOTE: This file (iwl-base.c) is used to build to multiple hardware targets - * by defining IWL to either 3945 or 4965. The Makefile used when building - * the base targets will create base-3945.o and base-4965.o - * - * The eventual goal is to move as many of the #if IWL / #endif blocks out of - * this file and into the hardware specific implementation files (iwl-XXXX.c) - * and leave only the common (non #ifdef sprinkled) code in this file - */ - #include #include #include @@ -75,9 +65,9 @@ static int iwl4965_tx_queue_update_write_ptr(struct iwl4965_priv *priv, /* module parameters */ static int iwl4965_param_disable_hw_scan; static int iwl4965_param_debug; -static int iwl4965_param_disable; /* def: enable radio */ -static int iwl4965_param_antenna; /* def: 0 = both antennas (use diversity) */ -int iwl4965_param_hwcrypto; /* def: using software encryption */ +static int iwl4965_param_disable; /* def: enable radio */ +static int iwl4965_param_antenna; /* def: 0 = both antennas (use diversity) */ +int iwl4965_param_hwcrypto; /* def: using software encryption */ static int iwl4965_param_qos_enable = 1; int iwl4965_param_queues_num = IWL_MAX_NUM_QUEUES; @@ -395,11 +385,7 @@ void iwl4965_tx_queue_free(struct iwl4965_priv *priv, struct iwl4965_tx_queue *t const u8 iwl4965_broadcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; /*************** STATION TABLE MANAGEMENT **** - * - * NOTE: This needs to be overhauled to better synchronize between - * how the iwl-4965.c is using iwl4965_hw_find_station vs. iwl-3945.c - * - * mac80211 should also be examined to determine if sta_info is duplicating + * mac80211 should be examined to determine if sta_info is duplicating * the functionality provided here */ @@ -482,8 +468,8 @@ u8 iwl4965_add_station_flags(struct iwl4965_priv *priv, const u8 *addr, int is_a } - /* These two conditions has the same outcome but keep them separate - since they have different meaning */ + /* These two conditions have the same outcome, but keep them separate + since they have different meanings */ if (unlikely(index == IWL_INVALID_STATION)) { spin_unlock_irqrestore(&priv->sta_lock, flags_spin); return index; @@ -843,8 +829,8 @@ int iwl4965_send_statistics_request(struct iwl4965_priv *priv) * iwl4965_rxon_add_station - add station into station table. * * there is only one AP station with id= IWL_AP_ID - * NOTE: mutex must be held before calling the this fnction -*/ + * NOTE: mutex must be held before calling this fnction + */ static int iwl4965_rxon_add_station(struct iwl4965_priv *priv, const u8 *addr, int is_ap) { @@ -866,7 +852,8 @@ static int iwl4965_rxon_add_station(struct iwl4965_priv *priv, * NOTE: Does not commit to the hardware; it sets appropriate bit fields * in the staging RXON flag structure based on the phymode */ -static int iwl4965_set_rxon_channel(struct iwl4965_priv *priv, u8 phymode, u16 channel) +static int iwl4965_set_rxon_channel(struct iwl4965_priv *priv, u8 phymode, + u16 channel) { if (!iwl4965_get_channel_info(priv, phymode, channel)) { IWL_DEBUG_INFO("Could not set channel to %d [%d]\n", @@ -965,12 +952,12 @@ static int iwl4965_check_rxon_cmd(struct iwl4965_rxon_cmd *rxon) } /** - * iwl4965_full_rxon_required - determine if RXON_ASSOC can be used in RXON commit + * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed * @priv: staging_rxon is compared to active_rxon * - * If the RXON structure is changing sufficient to require a new - * tune or to clear and reset the RXON_FILTER_ASSOC_MSK then return 1 - * to indicate a new tune is required. + * If the RXON structure is changing enough to require a new tune, + * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that + * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. */ static int iwl4965_full_rxon_required(struct iwl4965_priv *priv) { @@ -1267,7 +1254,7 @@ static int iwl4965_card_state_sync_callback(struct iwl4965_priv *priv, /* * CARD_STATE_CMD * - * Use: Sets the internal card state to enable, disable, or halt + * Use: Sets the device's internal card state to enable, disable, or halt * * When in the 'enable' state the card operates as normal. * When in the 'disable' state, the card enters into a low power mode. @@ -1643,14 +1630,12 @@ done: /** * iwl4965_report_frame - dump frame to syslog during debug sessions * - * hack this function to show different aspects of received frames, + * You may hack this function to show different aspects of received frames, * including selective frame dumps. * group100 parameter selects whether to show 1 out of 100 good frames. * - * TODO: ieee80211_hdr stuff is common to 3945 and 4965, so frame type - * info output is okay, but some of this stuff (e.g. iwl4965_rx_frame_stats) - * is 3945-specific and gives bad output for 4965. Need to split the - * functionality, keep common stuff here. + * TODO: This was originally written for 3945, need to audit for + * proper operation with 4965. */ void iwl4965_report_frame(struct iwl4965_priv *priv, struct iwl4965_rx_packet *pkt, @@ -2742,7 +2727,8 @@ static void iwl4965_build_tx_cmd_basic(struct iwl4965_priv *priv, cmd->cmd.tx.next_frame_len = 0; } -static int iwl4965_get_sta_id(struct iwl4965_priv *priv, struct ieee80211_hdr *hdr) +static int iwl4965_get_sta_id(struct iwl4965_priv *priv, + struct ieee80211_hdr *hdr) { int sta_id; u16 fc = le16_to_cpu(hdr->frame_control); @@ -4104,13 +4090,10 @@ static void iwl4965_setup_rx_handlers(struct iwl4965_priv *priv) iwl4965_rx_pm_debug_statistics_notif; priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif; - /* NOTE: iwl4965_rx_statistics is different based on whether - * the build is for the 3945 or the 4965. See the - * corresponding implementation in iwl-XXXX.c - * - * The same handler is used for both the REPLY to a - * discrete statistics request from the host as well as - * for the periodic statistics notification from the uCode + /* + * The same handler is used for both the REPLY to a discrete + * statistics request from the host as well as for the periodic + * statistics notifications (after received beacons) from the uCode. */ priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl4965_hw_rx_statistics; priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl4965_hw_rx_statistics; @@ -4124,7 +4107,7 @@ static void iwl4965_setup_rx_handlers(struct iwl4965_priv *priv) priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl4965_rx_card_state_notif; priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx; - /* Setup hardware specific Rx handlers */ + /* Set up hardware specific Rx handlers */ iwl4965_hw_rx_handler_setup(priv); } @@ -4178,9 +4161,11 @@ static void iwl4965_tx_cmd_complete(struct iwl4965_priv *priv, /* * Rx theory of operation * - * The host allocates 32 DMA target addresses and passes the host address - * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is - * 0 to 31 + * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs), + * each of which point to Receive Buffers to be filled by 4965. These get + * used not only for Rx frames, but for any command response or notification + * from the 4965. The driver and 4965 manage the Rx buffers by means + * of indexes into the circular buffer. * * Rx Queue Indexes * The host/firmware share two index registers for managing the Rx buffers. @@ -4196,10 +4181,10 @@ static void iwl4965_tx_cmd_complete(struct iwl4965_priv *priv, * The queue is empty (no good data) if WRITE = READ - 1, and is full if * WRITE = READ. * - * During initialization the host sets up the READ queue position to the first + * During initialization, the host sets up the READ queue position to the first * INDEX position, and WRITE to the last (READ - 1 wrapped) * - * When the firmware places a packet in a buffer it will advance the READ index + * When the firmware places a packet in a buffer, it will advance the READ index * and fire the RX interrupt. The driver can then query the READ index and * process as many packets as possible, moving the WRITE index forward as it * resets the Rx queue buffers with new memory. @@ -4221,16 +4206,16 @@ static void iwl4965_tx_cmd_complete(struct iwl4965_priv *priv, * * Driver sequence: * - * iwl4965_rx_queue_alloc() Allocates rx_free - * iwl4965_rx_replenish() Replenishes rx_free list from rx_used, and calls + * iwl4965_rx_queue_alloc() Allocates rx_free + * iwl4965_rx_replenish() Replenishes rx_free list from rx_used, and calls * iwl4965_rx_queue_restock - * iwl4965_rx_queue_restock() Moves available buffers from rx_free into Rx + * iwl4965_rx_queue_restock() Moves available buffers from rx_free into Rx * queue, updates firmware pointers, and updates * the WRITE index. If insufficient rx_free buffers * are available, schedules iwl4965_rx_replenish * * -- enable interrupts -- - * ISR - iwl4965_rx() Detach iwl4965_rx_mem_buffers from pool up to the + * ISR - iwl4965_rx() Detach iwl4965_rx_mem_buffers from pool up to the * READ INDEX, detaching the SKB from the pool. * Moves the packet buffer from queue to rx_used. * Calls iwl4965_rx_queue_restock to refill any empty @@ -4256,12 +4241,6 @@ static int iwl4965_rx_queue_space(const struct iwl4965_rx_queue *q) /** * iwl4965_rx_queue_update_write_ptr - Update the write pointer for the RX queue - * - * NOTE: This function has 3945 and 4965 specific code sections - * but is declared in base due to the majority of the - * implementation being the same (only a numeric constant is - * different) - * */ int iwl4965_rx_queue_update_write_ptr(struct iwl4965_priv *priv, struct iwl4965_rx_queue *q) { @@ -4302,9 +4281,7 @@ int iwl4965_rx_queue_update_write_ptr(struct iwl4965_priv *priv, struct iwl4965_ } /** - * iwl4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer pointer. - * - * NOTE: This function has 3945 and 4965 specific code paths in it. + * iwl4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr */ static inline __le32 iwl4965_dma_addr2rbd_ptr(struct iwl4965_priv *priv, dma_addr_t dma_addr) @@ -4316,9 +4293,9 @@ static inline __le32 iwl4965_dma_addr2rbd_ptr(struct iwl4965_priv *priv, /** * iwl4965_rx_queue_restock - refill RX queue from pre-allocated pool * - * If there are slots in the RX queue that need to be restocked, + * If there are slots in the RX queue that need to be restocked, * and we have free pre-allocated buffers, fill the ranks as much - * as we can pulling from rx_free. + * as we can, pulling from rx_free. * * This moves the 'write' index forward to catch up with 'processed', and * also updates the memory address in the firmware to reference the new @@ -4410,7 +4387,7 @@ void iwl4965_rx_replenish(void *data) } /* Assumes that the skb field of the buffers in 'pool' is kept accurate. - * If an SKB has been detached, the POOL needs to have it's SKB set to NULL + * If an SKB has been detached, the POOL needs to have its SKB set to NULL * This free routine walks the list of POOL entries and if SKB is set to * non NULL it is unmapped and freed */ @@ -4562,7 +4539,7 @@ int iwl4965_calc_sig_qual(int rssi_dbm, int noise_dbm) } /** - * iwl4965_rx_handle - Main entry function for receiving responses from the uCode + * iwl4965_rx_handle - Main entry function for receiving responses from uCode * * Uses the priv->rx_handlers callback function array to invoke * the appropriate handlers, including command responses, @@ -4587,7 +4564,7 @@ static void iwl4965_rx_handle(struct iwl4965_priv *priv) while (i != r) { rxb = rxq->queue[i]; - /* If an RXB doesn't have a queue slot associated with it + /* If an RXB doesn't have a Rx queue slot associated with it, * then a bug has been introduced in the queue refilling * routines -- catch it here */ BUG_ON(rxb == NULL); @@ -4629,8 +4606,8 @@ static void iwl4965_rx_handle(struct iwl4965_priv *priv) } if (reclaim) { - /* Invoke any callbacks, transfer the skb to caller, - * and fire off the (possibly) blocking iwl4965_send_cmd() + /* Invoke any callbacks, transfer the skb to caller, and + * fire off the (possibly) blocking iwl4965_send_cmd() * as we reclaim the driver command queue */ if (rxb && rxb->skb) iwl4965_tx_cmd_complete(priv, rxb); @@ -4996,7 +4973,8 @@ static void iwl4965_irq_tasklet(struct iwl4965_priv *priv) #ifdef CONFIG_IWL4965_DEBUG if (iwl4965_debug_level & IWL_DL_ISR) { - inta_mask = iwl4965_read32(priv, CSR_INT_MASK); /* just for debug */ + /* just for debug */ + inta_mask = iwl4965_read32(priv, CSR_INT_MASK); IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, inta_mask, inta_fh); } @@ -5041,7 +5019,7 @@ static void iwl4965_irq_tasklet(struct iwl4965_priv *priv) /* Safely ignore these bits for debug checks below */ inta &= ~(CSR_INT_BIT_MAC_CLK_ACTV | CSR_INT_BIT_ALIVE); - /* HW RF KILL switch toggled (4965 only) */ + /* HW RF KILL switch toggled */ if (inta & CSR_INT_BIT_RF_KILL) { int hw_rf_kill = 0; if (!(iwl4965_read32(priv, CSR_GP_CNTRL) & @@ -5064,7 +5042,7 @@ static void iwl4965_irq_tasklet(struct iwl4965_priv *priv) handled |= CSR_INT_BIT_RF_KILL; } - /* Chip got too hot and stopped itself (4965 only) */ + /* Chip got too hot and stopped itself */ if (inta & CSR_INT_BIT_CT_KILL) { IWL_ERROR("Microcode CT kill error detected.\n"); handled |= CSR_INT_BIT_CT_KILL; @@ -5219,11 +5197,11 @@ static const u8 iwl4965_eeprom_band_1[14] = { }; /* 5.2 GHz bands */ -static const u8 iwl4965_eeprom_band_2[] = { +static const u8 iwl4965_eeprom_band_2[] = { /* 4915-5080MHz */ 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16 }; -static const u8 iwl4965_eeprom_band_3[] = { /* 5205-5320MHz */ +static const u8 iwl4965_eeprom_band_3[] = { /* 5170-5320MHz */ 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 }; @@ -5243,7 +5221,8 @@ static u8 iwl4965_eeprom_band_7[] = { /* 5.2 FAT channel */ 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157 }; -static void iwl4965_init_band_reference(const struct iwl4965_priv *priv, int band, +static void iwl4965_init_band_reference(const struct iwl4965_priv *priv, + int band, int *eeprom_ch_count, const struct iwl4965_eeprom_channel **eeprom_ch_info, @@ -5255,7 +5234,7 @@ static void iwl4965_init_band_reference(const struct iwl4965_priv *priv, int ban *eeprom_ch_info = priv->eeprom.band_1_channels; *eeprom_ch_index = iwl4965_eeprom_band_1; break; - case 2: /* 5.2GHz band */ + case 2: /* 4.9GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_2); *eeprom_ch_info = priv->eeprom.band_2_channels; *eeprom_ch_index = iwl4965_eeprom_band_2; @@ -5265,22 +5244,22 @@ static void iwl4965_init_band_reference(const struct iwl4965_priv *priv, int ban *eeprom_ch_info = priv->eeprom.band_3_channels; *eeprom_ch_index = iwl4965_eeprom_band_3; break; - case 4: /* 5.2GHz band */ + case 4: /* 5.5GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_4); *eeprom_ch_info = priv->eeprom.band_4_channels; *eeprom_ch_index = iwl4965_eeprom_band_4; break; - case 5: /* 5.2GHz band */ + case 5: /* 5.7GHz band */ *eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_5); *eeprom_ch_info = priv->eeprom.band_5_channels; *eeprom_ch_index = iwl4965_eeprom_band_5; break; - case 6: + case 6: /* 2.4GHz FAT channels */ *eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_6); *eeprom_ch_info = priv->eeprom.band_24_channels; *eeprom_ch_index = iwl4965_eeprom_band_6; break; - case 7: + case 7: /* 5 GHz FAT channels */ *eeprom_ch_count = ARRAY_SIZE(iwl4965_eeprom_band_7); *eeprom_ch_info = priv->eeprom.band_52_channels; *eeprom_ch_index = iwl4965_eeprom_band_7; @@ -5549,7 +5528,8 @@ static int iwl4965_get_channels_for_scan(struct iwl4965_priv *priv, int phymode, scan_ch->channel = channels[i].chan; - ch_info = iwl4965_get_channel_info(priv, phymode, scan_ch->channel); + ch_info = iwl4965_get_channel_info(priv, phymode, + scan_ch->channel); if (!is_channel_valid(ch_info)) { IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n", scan_ch->channel); @@ -5571,7 +5551,7 @@ static int iwl4965_get_channels_for_scan(struct iwl4965_priv *priv, int phymode, scan_ch->active_dwell = cpu_to_le16(active_dwell); scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - /* Set power levels to defaults */ + /* Set txpower levels to defaults */ scan_ch->tpc.dsp_atten = 110; /* scan_pwr_info->tpc.dsp_atten; */ @@ -5581,8 +5561,8 @@ static int iwl4965_get_channels_for_scan(struct iwl4965_priv *priv, int phymode, else { scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level - scan_ch->tpc.tx_gain = ((1<<5) | (2 << 3)) | 3; + * power level: + * scan_ch->tpc.tx_gain = ((1<<5) | (2 << 3)) | 3; */ } @@ -5859,7 +5839,8 @@ static void iwl4965_dealloc_ucode_pci(struct iwl4965_priv *priv) * iwl4965_verify_inst_full - verify runtime uCode image in card vs. host, * looking at all data. */ -static int iwl4965_verify_inst_full(struct iwl4965_priv *priv, __le32 * image, u32 len) +static int iwl4965_verify_inst_full(struct iwl4965_priv *priv, __le32 * image, + u32 len) { u32 val; u32 save_len = len; @@ -5984,8 +5965,9 @@ static int iwl4965_verify_ucode(struct iwl4965_priv *priv) IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); - /* Show first several data entries in instruction SRAM. - * Selection of bootstrap image is arbitrary. */ + /* Since nothing seems to match, show first several data entries in + * instruction SRAM, so maybe visual inspection will give a clue. + * Selection of bootstrap image (vs. other images) is arbitrary. */ image = (__le32 *)priv->ucode_boot.v_addr; len = priv->ucode_boot.len; rc = iwl4965_verify_inst_full(priv, image, len); @@ -6077,7 +6059,7 @@ static int iwl4965_load_bsm(struct iwl4965_priv *priv) return -EINVAL; /* Tell bootstrap uCode where to find the "Initialize" uCode - * in host DRAM ... bits 31:0 for 3945, bits 35:4 for 4965. + * in host DRAM ... host DRAM physical address bits 35:4 for 4965. * NOTE: iwl4965_initialize_alive_start() will replace these values, * after the "initialize" uCode has run, to point to * runtime/protocol instructions and backup data cache. */ @@ -6487,7 +6469,7 @@ static void iwl4965_alive_start(struct iwl4965_priv *priv) goto restart; } - /* After the ALIVE response, we can process host commands */ + /* After the ALIVE response, we can send host commands to 4965 uCode */ set_bit(STATUS_ALIVE, &priv->status); /* Clear out the uCode error bit if it is set */ @@ -6544,7 +6526,7 @@ static void iwl4965_alive_start(struct iwl4965_priv *priv) memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); } - /* Configure BT coexistence */ + /* Configure Bluetooth device coexistence support */ iwl4965_send_bt_config(priv); /* Configure the adapter for unassociated operation */ @@ -6624,7 +6606,8 @@ static void __iwl4965_down(struct iwl4965_priv *priv) STATUS_FW_ERROR; spin_lock_irqsave(&priv->lock, flags); - iwl4965_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + iwl4965_clear_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); spin_unlock_irqrestore(&priv->lock, flags); iwl4965_hw_txq_ctx_stop(priv); @@ -6744,7 +6727,7 @@ static int __iwl4965_up(struct iwl4965_priv *priv) /* start card; "initialize" will load runtime ucode */ iwl4965_nic_start(priv); - /* MAC Address location in EEPROM same for 3945/4965 */ + /* MAC Address location in EEPROM is same for 3945/4965 */ get_eeprom_mac(priv, priv->mac_addr); IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr)); -- cgit v1.2.2