From 95ea8eec341c1fc881407c96114de7e4173c1b7c Mon Sep 17 00:00:00 2001 From: Samu Onkalo Date: Wed, 24 Nov 2010 12:57:05 -0800 Subject: drivers/leds/leds-lp5521.c: perform SW reset before detection Chip detection may fail if the chip is in some odd state for example after system restart. Chip doesn't have HW reset line. Signed-off-by: Samu Onkalo Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-lp5521.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index 963c014be0bf..33facd0c45d1 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -245,13 +245,6 @@ static int lp5521_configure(struct i2c_client *client, lp5521_init_engine(chip, attr_group); - lp5521_write(client, LP5521_REG_RESET, 0xff); - - usleep_range(10000, 20000); /* - * Exact value is not available. 10 - 20ms - * appears to be enough for reset. - */ - /* Set all PWMs to direct control mode */ ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F); @@ -716,6 +709,11 @@ static int lp5521_probe(struct i2c_client *client, usleep_range(1000, 2000); /* 500us abs min. */ } + lp5521_write(client, LP5521_REG_RESET, 0xff); + usleep_range(10000, 20000); /* + * Exact value is not available. 10 - 20ms + * appears to be enough for reset. + */ ret = lp5521_detect(client); if (ret) { -- cgit v1.2.2