From 4deedd845a322b3d356d80c87e2d9fcf50aa04be Mon Sep 17 00:00:00 2001 From: adam radford Date: Mon, 8 Mar 2010 12:37:46 -0800 Subject: [SCSI] 3w-xxxx, 3w-9xxx: force 60 second timeout This small patch forces 60 second timeouts for the older 3w-xxxx & 3w-9xxx drivers for systems that don't contain the udev rule for setting scsi timeouts to 60 seconds. Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/3w-9xxx.c | 24 ++++++++++++++++++------ drivers/scsi/3w-9xxx.h | 9 +++++---- drivers/scsi/3w-xxxx.c | 23 +++++++++++++++++------ drivers/scsi/3w-xxxx.h | 8 ++++---- 4 files changed, 44 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index e9788f55ab13..1bb774becf25 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -1,10 +1,11 @@ /* 3w-9xxx.c -- 3ware 9000 Storage Controller device driver for Linux. - Written By: Adam Radford - Modifications By: Tom Couch + Written By: Adam Radford + Modifications By: Tom Couch Copyright (C) 2004-2009 Applied Micro Circuits Corporation. + Copyright (C) 2010 LSI Corporation. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -40,10 +41,10 @@ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Bugs/Comments/Suggestions should be mailed to: - linuxraid@amcc.com + linuxraid@lsi.com For more information, goto: - http://www.amcc.com + http://www.lsi.com Note: This version of the driver does not contain a bundled firmware image. @@ -77,6 +78,7 @@ Use pci_resource_len() for ioremap(). 2.26.02.012 - Add power management support. 2.26.02.013 - Fix bug in twa_load_sgl(). + 2.26.02.014 - Force 60 second timeout default. */ #include @@ -102,14 +104,14 @@ #include "3w-9xxx.h" /* Globals */ -#define TW_DRIVER_VERSION "2.26.02.013" +#define TW_DRIVER_VERSION "2.26.02.014" static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT]; static unsigned int twa_device_extension_count; static int twa_major = -1; extern struct timezone sys_tz; /* Module parameters */ -MODULE_AUTHOR ("AMCC"); +MODULE_AUTHOR ("LSI"); MODULE_DESCRIPTION ("3ware 9000 Storage Controller Linux Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(TW_DRIVER_VERSION); @@ -1990,6 +1992,15 @@ static void twa_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id) scsi_dma_unmap(cmd); } /* End twa_unmap_scsi_data() */ +/* This function gets called when a disk is coming on-line */ +static int twa_slave_configure(struct scsi_device *sdev) +{ + /* Force 60 second timeout */ + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); + + return 0; +} /* End twa_slave_configure() */ + /* scsi_host_template initializer */ static struct scsi_host_template driver_template = { .module = THIS_MODULE, @@ -1999,6 +2010,7 @@ static struct scsi_host_template driver_template = { .bios_param = twa_scsi_biosparam, .change_queue_depth = twa_change_queue_depth, .can_queue = TW_Q_LENGTH-2, + .slave_configure = twa_slave_configure, .this_id = -1, .sg_tablesize = TW_APACHE_MAX_SGL_LENGTH, .max_sectors = TW_MAX_SECTORS, diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h index 2893eec78ed2..3343824855d0 100644 --- a/drivers/scsi/3w-9xxx.h +++ b/drivers/scsi/3w-9xxx.h @@ -1,10 +1,11 @@ /* 3w-9xxx.h -- 3ware 9000 Storage Controller device driver for Linux. - Written By: Adam Radford - Modifications By: Tom Couch + Written By: Adam Radford + Modifications By: Tom Couch Copyright (C) 2004-2009 Applied Micro Circuits Corporation. + Copyright (C) 2010 LSI Corporation. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -40,10 +41,10 @@ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Bugs/Comments/Suggestions should be mailed to: - linuxraid@amcc.com + linuxraid@lsi.com For more information, goto: - http://www.amcc.com + http://www.lsi.com */ #ifndef _3W_9XXX_H diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index 5faf903ca8c8..d119a614bf7d 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -1,12 +1,12 @@ /* 3w-xxxx.c -- 3ware Storage Controller device driver for Linux. - Written By: Adam Radford + Written By: Adam Radford Modifications By: Joel Jacobson Arnaldo Carvalho de Melo Brad Strand - Copyright (C) 1999-2009 3ware Inc. + Copyright (C) 1999-2010 3ware Inc. Kernel compatibility By: Andre Hedrick Non-Copyright (C) 2000 Andre Hedrick @@ -47,10 +47,10 @@ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Bugs/Comments/Suggestions should be mailed to: - linuxraid@amcc.com + linuxraid@lsi.com For more information, goto: - http://www.amcc.com + http://www.lsi.com History ------- @@ -194,6 +194,7 @@ 1.26.02.002 - Free irq handler in __tw_shutdown(). Turn on RCD bit for caching mode page. Serialize reset code. + 1.26.02.003 - Force 60 second timeout default. */ #include @@ -219,13 +220,13 @@ #include "3w-xxxx.h" /* Globals */ -#define TW_DRIVER_VERSION "1.26.02.002" +#define TW_DRIVER_VERSION "1.26.02.003" static TW_Device_Extension *tw_device_extension_list[TW_MAX_SLOT]; static int tw_device_extension_count = 0; static int twe_major = -1; /* Module parameters */ -MODULE_AUTHOR("AMCC"); +MODULE_AUTHOR("LSI"); MODULE_DESCRIPTION("3ware Storage Controller Linux Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(TW_DRIVER_VERSION); @@ -2245,6 +2246,15 @@ static void tw_shutdown(struct pci_dev *pdev) __tw_shutdown(tw_dev); } /* End tw_shutdown() */ +/* This function gets called when a disk is coming online */ +static int tw_slave_configure(struct scsi_device *sdev) +{ + /* Force 60 second timeout */ + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); + + return 0; +} /* End tw_slave_configure() */ + static struct scsi_host_template driver_template = { .module = THIS_MODULE, .name = "3ware Storage Controller", @@ -2253,6 +2263,7 @@ static struct scsi_host_template driver_template = { .bios_param = tw_scsi_biosparam, .change_queue_depth = tw_change_queue_depth, .can_queue = TW_Q_LENGTH-2, + .slave_configure = tw_slave_configure, .this_id = -1, .sg_tablesize = TW_MAX_SGL_LENGTH, .max_sectors = TW_MAX_SECTORS, diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h index a5a2ba2561d9..8b9f9d17e7fe 100644 --- a/drivers/scsi/3w-xxxx.h +++ b/drivers/scsi/3w-xxxx.h @@ -1,12 +1,12 @@ /* 3w-xxxx.h -- 3ware Storage Controller device driver for Linux. - Written By: Adam Radford + Written By: Adam Radford Modifications By: Joel Jacobson Arnaldo Carvalho de Melo Brad Strand - Copyright (C) 1999-2009 3ware Inc. + Copyright (C) 1999-2010 3ware Inc. Kernel compatiblity By: Andre Hedrick Non-Copyright (C) 2000 Andre Hedrick @@ -45,10 +45,10 @@ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Bugs/Comments/Suggestions should be mailed to: - linuxraid@amcc.com + linuxraid@lsi.com For more information, goto: - http://www.amcc.com + http://www.lsi.com */ #ifndef _3W_XXXX_H -- cgit v1.2.2 From c4de0cebc512148bee764bfdac7bf49555e41173 Mon Sep 17 00:00:00 2001 From: adam radford Date: Mon, 8 Mar 2010 12:40:36 -0800 Subject: [SCSI] 3ware maintainers update This patch updates the 3ware maintainers in the MAINTAINERS file. Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- MAINTAINERS | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 7a9ccda2a307..9ca2fbbe5255 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -131,19 +131,12 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/typhoon* -3W-9XXX SATA-RAID CONTROLLER DRIVER -M: Adam Radford +3WARE SAS/SATA-RAID SCSI DRIVERS (3W-XXXX, 3W-9XXX, 3W-SAS) +M: Adam Radford L: linux-scsi@vger.kernel.org -W: http://www.amcc.com +W: http://www.lsi.com S: Supported -F: drivers/scsi/3w-9xxx* - -3W-XXXX ATA-RAID CONTROLLER DRIVER -M: Adam Radford -L: linux-scsi@vger.kernel.org -W: http://www.amcc.com -S: Supported -F: drivers/scsi/3w-xxxx* +F: drivers/scsi/3w-* 53C700 AND 53C700-66 SCSI DRIVER M: "James E.J. Bottomley" -- cgit v1.2.2 From bb789d01620e5d36081b22edb6fb71cf55ff043c Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 9 Mar 2010 11:09:50 +0900 Subject: [SCSI] mpt2sas: fix the incorrect scsi_dma_map error checking scsi_dma_map() returns -1 if an error occurred (zero means that the command has no data). So the following current code can't catch an error: sges_left = scsi_dma_map(scmd); if (!sges_left) { sdev_printk(KERN_ERR, scmd->device, "pci_map_sg" " failed: request for %d bytes!\n", scsi_bufflen(scmd)); return -ENOMEM; } Signed-off-by: FUJITA Tomonori Acked-by: "Desai, Kashyap" Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index be171ed682e0..aa67b757bf23 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -988,7 +988,7 @@ _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc, u32 chain_offset; u32 chain_length; u32 chain_flags; - u32 sges_left; + int sges_left; u32 sges_in_segment; u32 sgl_flags; u32 sgl_flags_last_element; @@ -1009,7 +1009,7 @@ _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc, sg_scmd = scsi_sglist(scmd); sges_left = scsi_dma_map(scmd); - if (!sges_left) { + if (sges_left < 0) { sdev_printk(KERN_ERR, scmd->device, "pci_map_sg" " failed: request for %d bytes!\n", scsi_bufflen(scmd)); return -ENOMEM; -- cgit v1.2.2 From 36dd288f0f930c154ec6a4d73a6a35f3079418c6 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Tue, 9 Mar 2010 10:18:48 +0100 Subject: [SCSI] scsi_transport_fc: Protect against overflow in dev_loss_tmo The rport structure defines dev_loss_tmo as u32, which is later multiplied with HZ to get the actual timeout value. This might overflow for large dev_loss_tmo values. So we should be better using u64 as intermediate variables here to protect against overflow. Signed-off-by: Hannes Reinecke Acked-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_fc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 6cfffc88022a..55fe730a8606 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -834,7 +834,7 @@ static ssize_t store_fc_rport_dev_loss_tmo(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - int val; + unsigned long val; struct fc_rport *rport = transport_class_to_rport(dev); struct Scsi_Host *shost = rport_to_shost(rport); struct fc_internal *i = to_fc_internal(shost->transportt); @@ -847,6 +847,12 @@ store_fc_rport_dev_loss_tmo(struct device *dev, struct device_attribute *attr, if ((*cp && (*cp != '\n')) || (val < 0)) return -EINVAL; + /* + * Check for overflow; dev_loss_tmo is u32 + */ + if (val > UINT_MAX) + return -EINVAL; + /* * If fast_io_fail is off we have to cap * dev_loss_tmo at SCSI_DEVICE_BLOCK_MAX_TIMEOUT @@ -2865,7 +2871,7 @@ void fc_remote_port_delete(struct fc_rport *rport) { struct Scsi_Host *shost = rport_to_shost(rport); - int timeout = rport->dev_loss_tmo; + unsigned long timeout = rport->dev_loss_tmo; unsigned long flags; /* -- cgit v1.2.2 From f1c35e6aea579d5bdb6dc02dfa99c67c7c3b3f67 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 9 Mar 2010 16:31:43 +0530 Subject: [SCSI] mpt2sas: RESCAN Barrier work is added in case of HBA reset. Add the cancel_pending_work flag from the fw_event_work structure, and then to set the flag during host reset, check the flag later from work threads context and if cancel_pending_work_flag is set ingore those events. Now Rescan after host reset is changed. Added special task MPT2SAS_RESCAN_AFTER_HOST_RESET. This task will be queued at the time of HBA reset. this task is treated as barrier. All work after MPT2SAS_RESCAN_AFTER_HOST_RESET will be treated as new work and will be server by callback handle. If host_recovery is going on while running RESCAN task, it will wait for shos_recovery_done completion which will be called from HBA reset DONE context. Signed-off-by: Kashyap Desai Reviewed-by: Eric Moore Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 5 +- drivers/scsi/mpt2sas/mpt2sas_base.h | 3 +- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 140 +++++++++++++++++++---------------- 3 files changed, 79 insertions(+), 69 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 88e6eebc3159..da4bfbf95a7a 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -3607,6 +3607,8 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; mutex_init(&ioc->ctl_cmds.mutex); + init_completion(&ioc->shost_recovery_done); + for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) ioc->event_masks[i] = -1; @@ -3811,9 +3813,8 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); ioc->shost_recovery = 0; + complete(&ioc->shost_recovery_done); spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); - if (!r) - _base_reset_handler(ioc, MPT2_IOC_RUNNING); return r; } diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index e18b0544c38f..a5ec09f7c90a 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -119,7 +119,6 @@ #define MPT2_IOC_PRE_RESET 1 /* prior to host reset */ #define MPT2_IOC_AFTER_RESET 2 /* just after host reset */ #define MPT2_IOC_DONE_RESET 3 /* links re-initialized */ -#define MPT2_IOC_RUNNING 4 /* shost running */ /* * logging format @@ -603,7 +602,6 @@ struct MPT2SAS_ADAPTER { /* fw event handler */ char firmware_event_name[20]; struct workqueue_struct *firmware_event_thread; - u8 fw_events_off; spinlock_t fw_event_lock; struct list_head fw_event_list; @@ -611,6 +609,7 @@ struct MPT2SAS_ADAPTER { int aen_event_read_flag; u8 broadcast_aen_busy; u8 shost_recovery; + struct completion shost_recovery_done; spinlock_t ioc_reset_in_progress_lock; u8 ioc_link_reset_in_progress; u8 ignore_loginfos; diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index aa67b757bf23..6f121a904d05 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -109,14 +109,16 @@ struct sense_info { }; +#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF) + /** * struct fw_event_work - firmware event struct * @list: link list framework * @work: work object (ioc->fault_reset_work_q) + * @cancel_pending_work: flag set during reset handling * @ioc: per adapter object * @VF_ID: virtual function id * @VP_ID: virtual port id - * @host_reset_handling: handling events during host reset * @ignore: flag meaning this event has been marked to ignore * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h * @event_data: reply event data payload follows @@ -125,11 +127,11 @@ struct sense_info { */ struct fw_event_work { struct list_head list; - struct work_struct work; + u8 cancel_pending_work; + struct delayed_work delayed_work; struct MPT2SAS_ADAPTER *ioc; u8 VF_ID; u8 VP_ID; - u8 host_reset_handling; u8 ignore; u16 event; void *event_data; @@ -2325,8 +2327,9 @@ _scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) spin_lock_irqsave(&ioc->fw_event_lock, flags); list_add_tail(&fw_event->list, &ioc->fw_event_list); - INIT_WORK(&fw_event->work, _firmware_event_work); - queue_work(ioc->firmware_event_thread, &fw_event->work); + INIT_DELAYED_WORK(&fw_event->delayed_work, _firmware_event_work); + queue_delayed_work(ioc->firmware_event_thread, + &fw_event->delayed_work, 0); spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } @@ -2353,62 +2356,55 @@ _scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work spin_unlock_irqrestore(&ioc->fw_event_lock, flags); } + /** - * _scsih_fw_event_add - requeue an event + * _scsih_queue_rescan - queue a topology rescan from user context * @ioc: per adapter object - * @fw_event: object describing the event - * Context: This function will acquire ioc->fw_event_lock. * * Return nothing. */ static void -_scsih_fw_event_requeue(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work - *fw_event, unsigned long delay) +_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc) { - unsigned long flags; - if (ioc->firmware_event_thread == NULL) - return; + struct fw_event_work *fw_event; - spin_lock_irqsave(&ioc->fw_event_lock, flags); - queue_work(ioc->firmware_event_thread, &fw_event->work); - spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + if (ioc->wait_for_port_enable_to_complete) + return; + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) + return; + fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET; + fw_event->ioc = ioc; + _scsih_fw_event_add(ioc, fw_event); } /** - * _scsih_fw_event_off - turn flag off preventing event handling + * _scsih_fw_event_cleanup_queue - cleanup event queue * @ioc: per adapter object * - * Used to prevent handling of firmware events during adapter reset - * driver unload. + * Walk the firmware event queue, either killing timers, or waiting + * for outstanding events to complete * * Return nothing. */ static void -_scsih_fw_event_off(struct MPT2SAS_ADAPTER *ioc) +_scsih_fw_event_cleanup_queue(struct MPT2SAS_ADAPTER *ioc) { - unsigned long flags; + struct fw_event_work *fw_event, *next; - spin_lock_irqsave(&ioc->fw_event_lock, flags); - ioc->fw_events_off = 1; - spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + if (list_empty(&ioc->fw_event_list) || + !ioc->firmware_event_thread || in_interrupt()) + return; + list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) { + if (cancel_delayed_work(&fw_event->delayed_work)) { + _scsih_fw_event_free(ioc, fw_event); + continue; + } + fw_event->cancel_pending_work = 1; + } } -/** - * _scsih_fw_event_on - turn flag on allowing firmware event handling - * @ioc: per adapter object - * - * Returns nothing. - */ -static void -_scsih_fw_event_on(struct MPT2SAS_ADAPTER *ioc) -{ - unsigned long flags; - - spin_lock_irqsave(&ioc->fw_event_lock, flags); - ioc->fw_events_off = 0; - spin_unlock_irqrestore(&ioc->fw_event_lock, flags); -} /** * _scsih_ublock_io_device - set the device state to SDEV_RUNNING @@ -5694,13 +5690,13 @@ _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc) } /** - * _scsih_remove_unresponding_devices - removing unresponding devices + * _scsih_remove_unresponding_sas_devices - removing unresponding devices * @ioc: per adapter object * * Return nothing. */ static void -_scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc) +_scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc) { struct _sas_device *sas_device, *sas_device_next; struct _sas_node *sas_expander; @@ -5774,31 +5770,28 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) case MPT2_IOC_PRE_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); - _scsih_fw_event_off(ioc); break; case MPT2_IOC_AFTER_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); + if (ioc->scsih_cmds.status & MPT2_CMD_PENDING) { + ioc->scsih_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->scsih_cmds.smid); + complete(&ioc->scsih_cmds.done); + } if (ioc->tm_cmds.status & MPT2_CMD_PENDING) { ioc->tm_cmds.status |= MPT2_CMD_RESET; mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid); complete(&ioc->tm_cmds.done); } - _scsih_fw_event_on(ioc); + _scsih_fw_event_cleanup_queue(ioc); _scsih_flush_running_cmds(ioc); + _scsih_queue_rescan(ioc); break; case MPT2_IOC_DONE_RESET: dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); _scsih_sas_host_refresh(ioc); - _scsih_search_responding_sas_devices(ioc); - _scsih_search_responding_raid_devices(ioc); - _scsih_search_responding_expanders(ioc); - break; - case MPT2_IOC_RUNNING: - dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " - "MPT2_IOC_RUNNING\n", ioc->name, __func__)); - _scsih_remove_unresponding_devices(ioc); break; } } @@ -5815,21 +5808,31 @@ static void _firmware_event_work(struct work_struct *work) { struct fw_event_work *fw_event = container_of(work, - struct fw_event_work, work); + struct fw_event_work, delayed_work.work); unsigned long flags; struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; /* the queue is being flushed so ignore this event */ - spin_lock_irqsave(&ioc->fw_event_lock, flags); - if (ioc->fw_events_off || ioc->remove_host) { - spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + if (ioc->remove_host || fw_event->cancel_pending_work) { _scsih_fw_event_free(ioc, fw_event); return; } - spin_unlock_irqrestore(&ioc->fw_event_lock, flags); - if (ioc->shost_recovery) { - _scsih_fw_event_requeue(ioc, fw_event, 1000); + if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) { + _scsih_fw_event_free(ioc, fw_event); + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->shost_recovery) { + init_completion(&ioc->shost_recovery_done); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, + flags); + wait_for_completion(&ioc->shost_recovery_done); + } else + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, + flags); + _scsih_search_responding_sas_devices(ioc); + _scsih_search_responding_raid_devices(ioc); + _scsih_search_responding_expanders(ioc); + _scsih_remove_unresponding_sas_devices(ioc); return; } @@ -5891,16 +5894,11 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, { struct fw_event_work *fw_event; Mpi2EventNotificationReply_t *mpi_reply; - unsigned long flags; u16 event; /* events turned off due to host reset or driver unloading */ - spin_lock_irqsave(&ioc->fw_event_lock, flags); - if (ioc->fw_events_off || ioc->remove_host) { - spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + if (ioc->remove_host) return 1; - } - spin_unlock_irqrestore(&ioc->fw_event_lock, flags); mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); event = le16_to_cpu(mpi_reply->Event); @@ -6158,6 +6156,18 @@ _scsih_shutdown(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + struct workqueue_struct *wq; + unsigned long flags; + + ioc->remove_host = 1; + _scsih_fw_event_cleanup_queue(ioc); + + spin_lock_irqsave(&ioc->fw_event_lock, flags); + wq = ioc->firmware_event_thread; + ioc->firmware_event_thread = NULL; + spin_unlock_irqrestore(&ioc->fw_event_lock, flags); + if (wq) + destroy_workqueue(wq); _scsih_ir_shutdown(ioc); mpt2sas_base_detach(ioc); @@ -6184,7 +6194,7 @@ _scsih_remove(struct pci_dev *pdev) unsigned long flags; ioc->remove_host = 1; - _scsih_fw_event_off(ioc); + _scsih_fw_event_cleanup_queue(ioc); spin_lock_irqsave(&ioc->fw_event_lock, flags); wq = ioc->firmware_event_thread; -- cgit v1.2.2 From cd9843f8afb9dbdee101d1d7d9717e361c7c9b3a Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 9 Mar 2010 16:32:17 +0530 Subject: [SCSI] mpt2sas: modified _scsih_sas_device_find_by_handle/sas_address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit modified _scsih_sas_device_find_by_handle so to handle the search on both list(device list and device_init_list) Also, we moved the priority of the search so the ioc->sas_device_list is done first. The "sas_device_init_list" is only used during the 1st port enable, so its unlikely there’s devices on it. Signed-off-by: Kashyap Desai Reviewed-by: Eric Moore Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 57 ++++++++++++------------------------ 1 file changed, 18 insertions(+), 39 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 6f121a904d05..72a945373964 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -484,27 +484,17 @@ struct _sas_device * mpt2sas_scsih_sas_device_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) { - struct _sas_device *sas_device, *r; + struct _sas_device *sas_device; - r = NULL; - /* check the sas_device_init_list */ - list_for_each_entry(sas_device, &ioc->sas_device_init_list, - list) { - if (sas_device->sas_address != sas_address) - continue; - r = sas_device; - goto out; - } + list_for_each_entry(sas_device, &ioc->sas_device_list, list) + if (sas_device->sas_address == sas_address) + return sas_device; - /* then check the sas_device_list */ - list_for_each_entry(sas_device, &ioc->sas_device_list, list) { - if (sas_device->sas_address != sas_address) - continue; - r = sas_device; - goto out; - } - out: - return r; + list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) + if (sas_device->sas_address == sas_address) + return sas_device; + + return NULL; } /** @@ -519,28 +509,17 @@ mpt2sas_scsih_sas_device_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, static struct _sas_device * _scsih_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) { - struct _sas_device *sas_device, *r; + struct _sas_device *sas_device; - r = NULL; - if (ioc->wait_for_port_enable_to_complete) { - list_for_each_entry(sas_device, &ioc->sas_device_init_list, - list) { - if (sas_device->handle != handle) - continue; - r = sas_device; - goto out; - } - } else { - list_for_each_entry(sas_device, &ioc->sas_device_list, list) { - if (sas_device->handle != handle) - continue; - r = sas_device; - goto out; - } - } + list_for_each_entry(sas_device, &ioc->sas_device_list, list) + if (sas_device->handle == handle) + return sas_device; - out: - return r; + list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) + if (sas_device->handle == handle) + return sas_device; + + return NULL; } /** -- cgit v1.2.2 From 40956059fb2ef717f1e864a6685e7cd31758fc2b Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 9 Mar 2010 16:32:47 +0530 Subject: [SCSI] mpt2sas: Upgrading version to 04.100.01.02 Upgraded version string. Signed-off-by: Kashyap Desai Reviewed-by: Eric Moore Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index a5ec09f7c90a..199424d22346 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -69,11 +69,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "04.100.01.00" +#define MPT2SAS_DRIVER_VERSION "04.100.01.02" #define MPT2SAS_MAJOR_VERSION 04 #define MPT2SAS_MINOR_VERSION 100 #define MPT2SAS_BUILD_VERSION 01 -#define MPT2SAS_RELEASE_VERSION 00 +#define MPT2SAS_RELEASE_VERSION 02 /* * Set MPT2SAS_SG_DEPTH value based on user input. -- cgit v1.2.2 From 1278b11f46d9f34097f44ecc417148f27e8997fe Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 9 Mar 2010 17:34:13 +0530 Subject: [SCSI] mpt2sas : Device removal algorithm in interrupt context only external host not connecting after controller reboot: The problem is : devices are not coming back after having the cable disconnected then reconnected. The problem is because the driver/firmware device removal handshake is failing. Due to this failure, the controller firmware is not sending out device add events when the target is reconnected. This is root caused to a race in the driver/firmware device removal algorithm. There is duplicate code in both interrupt and user context; where target reset is being issue from user context path while sas_iounit_control(OP_REMOVE) is being sent from interrupt context. An active target_reset will fail the OP_REMOVE. To fix this problem, the duplicate code has been removed from user context path. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 11 -- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 307 ++++++++++++++--------------------- 2 files changed, 123 insertions(+), 195 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 199424d22346..142b694c9de5 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -259,16 +259,6 @@ struct _internal_cmd { u16 smid; }; -/* - * SAS Topology Structures - */ - -#define MPTSAS_STATE_TR_SEND 0x0001 -#define MPTSAS_STATE_TR_COMPLETE 0x0002 -#define MPTSAS_STATE_CNTRL_SEND 0x0004 -#define MPTSAS_STATE_CNTRL_COMPLETE 0x0008 - -#define MPT2SAS_REQ_SAS_CNTRL 0x0010 /** * struct _sas_device - attached device information @@ -306,7 +296,6 @@ struct _sas_device { u16 slot; u8 hidden_raid_component; u8 responding; - u16 state; }; /** diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 72a945373964..6d9f99720b48 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2546,25 +2546,24 @@ static void _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle) { Mpi2SCSITaskManagementRequest_t *mpi_request; - struct MPT2SAS_TARGET *sas_target_priv_data; u16 smid; struct _sas_device *sas_device; unsigned long flags; struct _tr_list *delayed_tr; - if (ioc->shost_recovery) { - printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", - __func__, ioc->name); + if (ioc->shost_recovery || ioc->remove_host) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " + "progress!\n", __func__, ioc->name)); return; } spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); - spin_unlock_irqrestore(&ioc->sas_device_lock, flags); - - /* skip is hidden raid component */ - if (sas_device && sas_device->hidden_raid_component) + if (sas_device && sas_device->hidden_raid_component) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); return; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx); if (!smid) { @@ -2573,36 +2572,16 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle) return; INIT_LIST_HEAD(&delayed_tr->list); delayed_tr->handle = handle; - delayed_tr->state = MPT2SAS_REQ_SAS_CNTRL; - list_add_tail(&delayed_tr->list, - &ioc->delayed_tr_list); - if (sas_device && sas_device->starget) { - dewtprintk(ioc, starget_printk(KERN_INFO, - sas_device->starget, "DELAYED:tr:handle(0x%04x), " - "(open)\n", handle)); - } else { - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT - "DELAYED:tr:handle(0x%04x), (open)\n", - ioc->name, handle)); - } - return; - } - - if (sas_device) { - sas_device->state |= MPTSAS_STATE_TR_SEND; - sas_device->state |= MPT2SAS_REQ_SAS_CNTRL; - if (sas_device->starget && sas_device->starget->hostdata) { - sas_target_priv_data = sas_device->starget->hostdata; - sas_target_priv_data->tm_busy = 1; - dewtprintk(ioc, starget_printk(KERN_INFO, - sas_device->starget, "tr:handle(0x%04x), (open)\n", - handle)); - } - } else { + list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list); dewtprintk(ioc, printk(MPT2SAS_INFO_FMT - "tr:handle(0x%04x), (open)\n", ioc->name, handle)); + "DELAYED:tr:handle(0x%04x), (open)\n", + ioc->name, handle)); + return; } + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), " + "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid, + ioc->tm_tr_cb_idx)); mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; @@ -2632,35 +2611,15 @@ static u8 _scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { - unsigned long flags; - u16 handle; - struct _sas_device *sas_device; Mpi2SasIoUnitControlReply_t *mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); - handle = le16_to_cpu(mpi_reply->DevHandle); - - spin_lock_irqsave(&ioc->sas_device_lock, flags); - sas_device = _scsih_sas_device_find_by_handle(ioc, handle); - spin_unlock_irqrestore(&ioc->sas_device_lock, flags); - - if (sas_device) { - sas_device->state |= MPTSAS_STATE_CNTRL_COMPLETE; - if (sas_device->starget) - dewtprintk(ioc, starget_printk(KERN_INFO, - sas_device->starget, - "sc_complete:handle(0x%04x), " - "ioc_status(0x%04x), loginfo(0x%08x)\n", - handle, le16_to_cpu(mpi_reply->IOCStatus), - le32_to_cpu(mpi_reply->IOCLogInfo))); - } else { - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT - "sc_complete:handle(0x%04x), " - "ioc_status(0x%04x), loginfo(0x%08x)\n", - ioc->name, handle, le16_to_cpu(mpi_reply->IOCStatus), - le32_to_cpu(mpi_reply->IOCLogInfo))); - } - + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT + "sc_complete:handle(0x%04x), (open) " + "smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n", + ioc->name, le16_to_cpu(mpi_reply->DevHandle), smid, + le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo))); return 1; } @@ -2684,87 +2643,63 @@ static u8 _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) { - unsigned long flags; u16 handle; - struct _sas_device *sas_device; + Mpi2SCSITaskManagementRequest_t *mpi_request_tm; Mpi2SCSITaskManagementReply_t *mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); Mpi2SasIoUnitControlRequest_t *mpi_request; u16 smid_sas_ctrl; - struct MPT2SAS_TARGET *sas_target_priv_data; struct _tr_list *delayed_tr; - u8 rc; - - handle = le16_to_cpu(mpi_reply->DevHandle); - spin_lock_irqsave(&ioc->sas_device_lock, flags); - sas_device = _scsih_sas_device_find_by_handle(ioc, handle); - spin_unlock_irqrestore(&ioc->sas_device_lock, flags); - if (sas_device) { - sas_device->state |= MPTSAS_STATE_TR_COMPLETE; - if (sas_device->starget) { - dewtprintk(ioc, starget_printk(KERN_INFO, - sas_device->starget, "tr_complete:handle(0x%04x), " - "(%s) ioc_status(0x%04x), loginfo(0x%08x), " - "completed(%d)\n", sas_device->handle, - (sas_device->state & MPT2SAS_REQ_SAS_CNTRL) ? - "open" : "active", - le16_to_cpu(mpi_reply->IOCStatus), - le32_to_cpu(mpi_reply->IOCLogInfo), - le32_to_cpu(mpi_reply->TerminationCount))); - if (sas_device->starget->hostdata) { - sas_target_priv_data = - sas_device->starget->hostdata; - sas_target_priv_data->tm_busy = 0; - } - } - } else { - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT - "tr_complete:handle(0x%04x), (open) ioc_status(0x%04x), " - "loginfo(0x%08x), completed(%d)\n", ioc->name, - handle, le16_to_cpu(mpi_reply->IOCStatus), - le32_to_cpu(mpi_reply->IOCLogInfo), - le32_to_cpu(mpi_reply->TerminationCount))); + if (ioc->shost_recovery || ioc->remove_host) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " + "progress!\n", __func__, ioc->name)); + return 1; } - if (!list_empty(&ioc->delayed_tr_list)) { - delayed_tr = list_entry(ioc->delayed_tr_list.next, - struct _tr_list, list); - mpt2sas_base_free_smid(ioc, smid); - if (delayed_tr->state & MPT2SAS_REQ_SAS_CNTRL) - _scsih_tm_tr_send(ioc, delayed_tr->handle); - list_del(&delayed_tr->list); - kfree(delayed_tr); - rc = 0; /* tells base_interrupt not to free mf */ - } else - rc = 1; - - if (sas_device && !(sas_device->state & MPT2SAS_REQ_SAS_CNTRL)) - return rc; - - if (ioc->shost_recovery) { - printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", - __func__, ioc->name); - return rc; + mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid); + handle = le16_to_cpu(mpi_request_tm->DevHandle); + if (handle != le16_to_cpu(mpi_reply->DevHandle)) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "spurious interrupt: " + "handle(0x%04x:0x%04x), smid(%d)!!!\n", ioc->name, handle, + le16_to_cpu(mpi_reply->DevHandle), smid)); + return 0; } + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT + "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), " + "loginfo(0x%08x), completed(%d)\n", ioc->name, + handle, smid, le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo), + le32_to_cpu(mpi_reply->TerminationCount))); + smid_sas_ctrl = mpt2sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx); if (!smid_sas_ctrl) { printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); - return rc; + return 1; } - if (sas_device) - sas_device->state |= MPTSAS_STATE_CNTRL_SEND; - + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sc_send:handle(0x%04x), " + "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid_sas_ctrl, + ioc->tm_sas_control_cb_idx)); mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl); memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t)); mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE; - mpi_request->DevHandle = mpi_reply->DevHandle; + mpi_request->DevHandle = mpi_request_tm->DevHandle; mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl); - return rc; + + if (!list_empty(&ioc->delayed_tr_list)) { + delayed_tr = list_entry(ioc->delayed_tr_list.next, + struct _tr_list, list); + mpt2sas_base_free_smid(ioc, smid); + _scsih_tm_tr_send(ioc, delayed_tr->handle); + list_del(&delayed_tr->list); + kfree(delayed_tr); + return 0; /* tells base_interrupt not to free mf */ + } + return 1; } /** @@ -4101,67 +4036,38 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd) } /** - * _scsih_remove_device - removing sas device object + * _scsih_remove_pd_device - removing sas device pd object * @ioc: per adapter object - * @sas_device: the sas_device object + * @sas_device_delete: the sas_device object * + * For hidden raid components, we do driver-fw handshake from + * hotplug work threads. * Return nothing. */ static void -_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, struct _sas_device - *sas_device) +_scsih_remove_pd_device(struct MPT2SAS_ADAPTER *ioc, struct _sas_device + sas_device) { - struct MPT2SAS_TARGET *sas_target_priv_data; Mpi2SasIoUnitControlReply_t mpi_reply; Mpi2SasIoUnitControlRequest_t mpi_request; - u16 device_handle, handle; + u16 vol_handle, handle; - if (!sas_device) - return; - - handle = sas_device->handle; + handle = sas_device.handle; dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: handle(0x%04x)," " sas_addr(0x%016llx)\n", ioc->name, __func__, handle, - (unsigned long long) sas_device->sas_address)); - - if (sas_device->starget && sas_device->starget->hostdata) { - sas_target_priv_data = sas_device->starget->hostdata; - sas_target_priv_data->deleted = 1; - } - - if (ioc->remove_host || ioc->shost_recovery || !handle) - goto out; + (unsigned long long) sas_device.sas_address)); - if ((sas_device->state & MPTSAS_STATE_TR_COMPLETE)) { - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "\tskip " - "target_reset handle(0x%04x)\n", ioc->name, - handle)); - goto skip_tr; - } - - /* Target Reset to flush out all the outstanding IO */ - device_handle = (sas_device->hidden_raid_component) ? - sas_device->volume_handle : handle; - if (device_handle) { - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset: " - "handle(0x%04x)\n", ioc->name, device_handle)); - mutex_lock(&ioc->tm_cmds.mutex); - mpt2sas_scsih_issue_tm(ioc, device_handle, 0, - MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10); - ioc->tm_cmds.status = MPT2_CMD_NOT_USED; - mutex_unlock(&ioc->tm_cmds.mutex); - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset " - "done: handle(0x%04x)\n", ioc->name, device_handle)); - if (ioc->shost_recovery) - goto out; - } - skip_tr: - - if ((sas_device->state & MPTSAS_STATE_CNTRL_COMPLETE)) { - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "\tskip " - "sas_cntrl handle(0x%04x)\n", ioc->name, handle)); - goto out; - } + vol_handle = sas_device.volume_handle; + if (!vol_handle) + return; + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset: " + "handle(0x%04x)\n", ioc->name, vol_handle)); + mpt2sas_scsih_issue_tm(ioc, vol_handle, 0, + MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30); + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset " + "done: handle(0x%04x)\n", ioc->name, vol_handle)); + if (ioc->shost_recovery) + return; /* SAS_IO_UNIT_CNTR - send REMOVE_DEVICE */ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: handle" @@ -4169,34 +4075,68 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, struct _sas_device memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t)); mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; mpi_request.Operation = MPI2_SAS_OP_REMOVE_DEVICE; - mpi_request.DevHandle = handle; - mpi_request.VF_ID = 0; /* TODO */ - mpi_request.VP_ID = 0; + mpi_request.DevHandle = cpu_to_le16(handle); if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply, - &mpi_request)) != 0) { + &mpi_request)) != 0) printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); - } dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: ioc_status" "(0x%04x), loginfo(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply.IOCStatus), le32_to_cpu(mpi_reply.IOCLogInfo))); - out: + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: handle(0x%04x)," + " sas_addr(0x%016llx)\n", ioc->name, __func__, handle, + (unsigned long long) sas_device.sas_address)); +} + +/** + * _scsih_remove_device - removing sas device object + * @ioc: per adapter object + * @sas_device_delete: the sas_device object + * + * Return nothing. + */ +static void +_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, + struct _sas_device *sas_device) +{ + struct _sas_device sas_device_backup; + struct MPT2SAS_TARGET *sas_target_priv_data; - _scsih_ublock_io_device(ioc, handle); + if (!sas_device) + return; + + memcpy(&sas_device_backup, sas_device, sizeof(struct _sas_device)); + _scsih_sas_device_remove(ioc, sas_device); - mpt2sas_transport_port_remove(ioc, sas_device->sas_address, - sas_device->sas_address_parent); + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: " + "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, + sas_device_backup.handle, (unsigned long long) + sas_device_backup.sas_address)); + + if (sas_device_backup.starget && sas_device_backup.starget->hostdata) { + sas_target_priv_data = sas_device_backup.starget->hostdata; + sas_target_priv_data->deleted = 1; + } + + if (sas_device_backup.hidden_raid_component) + _scsih_remove_pd_device(ioc, sas_device_backup); + + _scsih_ublock_io_device(ioc, sas_device_backup.handle); + + mpt2sas_transport_port_remove(ioc, sas_device_backup.sas_address, + sas_device_backup.sas_address_parent); printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr" - "(0x%016llx)\n", ioc->name, handle, - (unsigned long long) sas_device->sas_address); - _scsih_sas_device_remove(ioc, sas_device); + "(0x%016llx)\n", ioc->name, sas_device_backup.handle, + (unsigned long long) sas_device_backup.sas_address); - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: handle" - "(0x%04x)\n", ioc->name, __func__, handle)); + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: " + "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, + sas_device_backup.handle, (unsigned long long) + sas_device_backup.sas_address)); } #ifdef CONFIG_SCSI_MPT2SAS_LOGGING @@ -5442,7 +5382,6 @@ _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, if (sas_device->sas_address == sas_address && sas_device->slot == slot && sas_device->starget) { sas_device->responding = 1; - sas_device->state = 0; starget = sas_device->starget; sas_target_priv_data = starget->hostdata; sas_target_priv_data->tm_busy = 0; -- cgit v1.2.2 From e05a9e7b18dfcce6911d0b901d7f04387cc1d93c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 9 Mar 2010 22:14:34 +0100 Subject: [SCSI] pm8001: drop redundant memset The region set by the call to memset is immediately overwritten by the subsequent call to memcpy. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); // Signed-off-by: Julia Lawall Acked-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 909c00ec044f..5ff8261c5d67 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -4390,7 +4390,6 @@ pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha, return -ENOMEM; } } - memset(buffer, 0, fw_control->len); memcpy(buffer, fw_control->buffer, fw_control->len); flash_update_info.sgl.addr = cpu_to_le64(phys_addr); flash_update_info.sgl.im_len.len = cpu_to_le32(fw_control->len); -- cgit v1.2.2 From 6ce00cae684e7c6310e14634320184ca3c011750 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 11 Mar 2010 14:09:35 -0800 Subject: [SCSI] gdth: fix buffer overflow This allows i == MAXHA, which is out of range Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/gdth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 35a4b3073ec3..a765fe7a55c3 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -3842,7 +3842,7 @@ int __init option_setup(char *str) TRACE2(("option_setup() str %s\n", str ? str:"NULL")); - while (cur && isdigit(*cur) && i <= MAXHA) { + while (cur && isdigit(*cur) && i < MAXHA) { ints[i++] = simple_strtoul(cur, NULL, 0); if ((cur = strchr(cur, ',')) != NULL) cur++; } -- cgit v1.2.2 From f3d6e1dcd291fd0da3accb0d60fbd0d26d2189ed Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 11 Mar 2010 14:09:44 -0800 Subject: [SCSI] pmcraid: redundant check in pmcraid_check_ioctl_buffer() struct pmcraid_ioctl_header member buffer_length is unsigned, so this check appears redundant. Signed-off-by: Roel Kluin Acked-by: Anil Ravindranath Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/pmcraid.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index 53aefffbaead..c44e4ab4e938 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -3751,12 +3751,6 @@ static int pmcraid_check_ioctl_buffer( return -EINVAL; } - /* buffer length can't be negetive */ - if (hdr->buffer_length < 0) { - pmcraid_err("ioctl: invalid buffer length specified\n"); - return -EINVAL; - } - /* check for appropriate buffer access */ if ((_IOC_DIR(cmd) & _IOC_READ) == _IOC_READ) access = VERIFY_WRITE; -- cgit v1.2.2 From 4644efabde172808c0a8b6e3f17e4c204a4e52e7 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 11 Mar 2010 14:09:55 -0800 Subject: [SCSI] bfa: eliminate useless code The variable bfa_itnim is initialized twice to the same (side effect-free) expression. Drop one initialization. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // Signed-off-by: Julia Lawall Acked-by: Jing Huang Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfad_im.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c index 78f42aa57369..e2c70de2dba5 100644 --- a/drivers/scsi/bfa/bfad_im.c +++ b/drivers/scsi/bfa/bfad_im.c @@ -252,7 +252,6 @@ bfad_im_target_reset_send(struct bfad_s *bfad, struct scsi_cmnd *cmnd, struct bfa_itnim_s *bfa_itnim; bfa_status_t rc = BFA_STATUS_OK; - bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim->fcs_itnim); tskim = bfa_tskim_alloc(&bfad->bfa, (struct bfad_tskim_s *) cmnd); if (!tskim) { BFA_DEV_PRINTF(bfad, BFA_ERR, -- cgit v1.2.2 From fc193172e63af2c749e198816a1ee694dd6395e6 Mon Sep 17 00:00:00 2001 From: Richard A Lary Date: Fri, 12 Mar 2010 15:27:06 -0800 Subject: [SCSI] mpt2sas: use correct pci_resource_flag for comparison This patch replaces incorrect base address space flag with correct IO resource flag. Also, performs check of memory resource to validate resource before using. Signed-off-by: Richard A Lary Acked-by: "Desai, Kashyap" Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index da4bfbf95a7a..fb886d099baf 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -1253,7 +1253,7 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc) } for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) { - if (pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO) { + if (pci_resource_flags(pdev, i) & IORESOURCE_IO) { if (pio_sz) continue; pio_chip = (u64)pci_resource_start(pdev, i); @@ -1261,15 +1261,18 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc) } else { if (memap_sz) continue; - ioc->chip_phys = pci_resource_start(pdev, i); - chip_phys = (u64)ioc->chip_phys; - memap_sz = pci_resource_len(pdev, i); - ioc->chip = ioremap(ioc->chip_phys, memap_sz); - if (ioc->chip == NULL) { - printk(MPT2SAS_ERR_FMT "unable to map adapter " - "memory!\n", ioc->name); - r = -EINVAL; - goto out_fail; + /* verify memory resource is valid before using */ + if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { + ioc->chip_phys = pci_resource_start(pdev, i); + chip_phys = (u64)ioc->chip_phys; + memap_sz = pci_resource_len(pdev, i); + ioc->chip = ioremap(ioc->chip_phys, memap_sz); + if (ioc->chip == NULL) { + printk(MPT2SAS_ERR_FMT "unable to map " + "adapter memory!\n", ioc->name); + r = -EINVAL; + goto out_fail; + } } } } -- cgit v1.2.2 From a2f6a024e1a7ce37f424a567733501d98b8555d7 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:07:36 -0800 Subject: [SCSI] libfc: recode incoming PRLI handling Reduce indentation in fc_rport_recv_prli_req() using gotos. Also add payload length checks. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_rport.c | 195 +++++++++++++++++++----------------------- 1 file changed, 87 insertions(+), 108 deletions(-) diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index b37d0ff28b35..39e440f0f54a 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -1442,136 +1442,115 @@ static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata, struct fc_els_spp *spp; /* response spp */ unsigned int len; unsigned int plen; - enum fc_els_rjt_reason reason = ELS_RJT_UNAB; - enum fc_els_rjt_explan explan = ELS_EXPL_NONE; enum fc_els_spp_resp resp; struct fc_seq_els_data rjt_data; u32 f_ctl; u32 fcp_parm; u32 roles = FC_RPORT_ROLE_UNKNOWN; - rjt_data.fp = NULL; + rjt_data.fp = NULL; fh = fc_frame_header_get(rx_fp); FC_RPORT_DBG(rdata, "Received PRLI request while in state %s\n", fc_rport_state(rdata)); - switch (rdata->rp_state) { - case RPORT_ST_PRLI: - case RPORT_ST_RTV: - case RPORT_ST_READY: - case RPORT_ST_ADISC: - reason = ELS_RJT_NONE; - break; - default: - fc_frame_free(rx_fp); - return; - break; - } len = fr_len(rx_fp) - sizeof(*fh); pp = fc_frame_payload_get(rx_fp, sizeof(*pp)); - if (pp == NULL) { - reason = ELS_RJT_PROT; - explan = ELS_EXPL_INV_LEN; - } else { - plen = ntohs(pp->prli.prli_len); - if ((plen % 4) != 0 || plen > len) { - reason = ELS_RJT_PROT; - explan = ELS_EXPL_INV_LEN; - } else if (plen < len) { - len = plen; - } - plen = pp->prli.prli_spp_len; - if ((plen % 4) != 0 || plen < sizeof(*spp) || - plen > len || len < sizeof(*pp)) { - reason = ELS_RJT_PROT; - explan = ELS_EXPL_INV_LEN; - } - rspp = &pp->spp; + if (!pp) + goto reject_len; + plen = ntohs(pp->prli.prli_len); + if ((plen % 4) != 0 || plen > len || plen < 16) + goto reject_len; + if (plen < len) + len = plen; + plen = pp->prli.prli_spp_len; + if ((plen % 4) != 0 || plen < sizeof(*spp) || + plen > len || len < sizeof(*pp) || plen < 12) + goto reject_len; + rspp = &pp->spp; + + fp = fc_frame_alloc(lport, len); + if (!fp) { + rjt_data.reason = ELS_RJT_UNAB; + rjt_data.explan = ELS_EXPL_INSUF_RES; + goto reject; } - if (reason != ELS_RJT_NONE || - (fp = fc_frame_alloc(lport, len)) == NULL) { - rjt_data.reason = reason; - rjt_data.explan = explan; - lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); - } else { - sp = lport->tt.seq_start_next(sp); - WARN_ON(!sp); - pp = fc_frame_payload_get(fp, len); - WARN_ON(!pp); - memset(pp, 0, len); - pp->prli.prli_cmd = ELS_LS_ACC; - pp->prli.prli_spp_len = plen; - pp->prli.prli_len = htons(len); - len -= sizeof(struct fc_els_prli); - - /* reinitialize remote port roles */ - rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN; - - /* - * Go through all the service parameter pages and build - * response. If plen indicates longer SPP than standard, - * use that. The entire response has been pre-cleared above. - */ - spp = &pp->spp; - while (len >= plen) { - spp->spp_type = rspp->spp_type; - spp->spp_type_ext = rspp->spp_type_ext; - spp->spp_flags = rspp->spp_flags & FC_SPP_EST_IMG_PAIR; - resp = FC_SPP_RESP_ACK; - if (rspp->spp_flags & FC_SPP_RPA_VAL) - resp = FC_SPP_RESP_NO_PA; - switch (rspp->spp_type) { - case 0: /* common to all FC-4 types */ - break; - case FC_TYPE_FCP: - fcp_parm = ntohl(rspp->spp_params); - if (fcp_parm & FCP_SPPF_RETRY) - rdata->flags |= FC_RP_FLAGS_RETRY; - rdata->supported_classes = FC_COS_CLASS3; - if (fcp_parm & FCP_SPPF_INIT_FCN) - roles |= FC_RPORT_ROLE_FCP_INITIATOR; - if (fcp_parm & FCP_SPPF_TARG_FCN) - roles |= FC_RPORT_ROLE_FCP_TARGET; - rdata->ids.roles = roles; - - spp->spp_params = - htonl(lport->service_params); - break; - default: - resp = FC_SPP_RESP_INVL; - break; - } - spp->spp_flags |= resp; - len -= plen; - rspp = (struct fc_els_spp *)((char *)rspp + plen); - spp = (struct fc_els_spp *)((char *)spp + plen); - } + sp = lport->tt.seq_start_next(sp); + WARN_ON(!sp); + pp = fc_frame_payload_get(fp, len); + WARN_ON(!pp); + memset(pp, 0, len); + pp->prli.prli_cmd = ELS_LS_ACC; + pp->prli.prli_spp_len = plen; + pp->prli.prli_len = htons(len); + len -= sizeof(struct fc_els_prli); - /* - * Send LS_ACC. If this fails, the originator should retry. - */ - f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ; - f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT; - ep = fc_seq_exch(sp); - fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, - FC_TYPE_ELS, f_ctl, 0); - lport->tt.seq_send(lport, sp, fp); + /* reinitialize remote port roles */ + rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN; - /* - * Get lock and re-check state. - */ - switch (rdata->rp_state) { - case RPORT_ST_PRLI: - fc_rport_enter_ready(rdata); + /* + * Go through all the service parameter pages and build + * response. If plen indicates longer SPP than standard, + * use that. The entire response has been pre-cleared above. + */ + spp = &pp->spp; + while (len >= plen) { + spp->spp_type = rspp->spp_type; + spp->spp_type_ext = rspp->spp_type_ext; + spp->spp_flags = rspp->spp_flags & FC_SPP_EST_IMG_PAIR; + resp = FC_SPP_RESP_ACK; + + switch (rspp->spp_type) { + case 0: /* common to all FC-4 types */ break; - case RPORT_ST_READY: - case RPORT_ST_ADISC: + case FC_TYPE_FCP: + fcp_parm = ntohl(rspp->spp_params); + if (fcp_parm & FCP_SPPF_RETRY) + rdata->flags |= FC_RP_FLAGS_RETRY; + rdata->supported_classes = FC_COS_CLASS3; + if (fcp_parm & FCP_SPPF_INIT_FCN) + roles |= FC_RPORT_ROLE_FCP_INITIATOR; + if (fcp_parm & FCP_SPPF_TARG_FCN) + roles |= FC_RPORT_ROLE_FCP_TARGET; + rdata->ids.roles = roles; + + spp->spp_params = htonl(lport->service_params); break; default: + resp = FC_SPP_RESP_INVL; break; } + spp->spp_flags |= resp; + len -= plen; + rspp = (struct fc_els_spp *)((char *)rspp + plen); + spp = (struct fc_els_spp *)((char *)spp + plen); + } + + /* + * Send LS_ACC. If this fails, the originator should retry. + */ + f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ; + f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT; + ep = fc_seq_exch(sp); + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, + FC_TYPE_ELS, f_ctl, 0); + lport->tt.seq_send(lport, sp, fp); + + switch (rdata->rp_state) { + case RPORT_ST_PRLI: + fc_rport_enter_ready(rdata); + break; + default: + break; } + goto drop; + +reject_len: + rjt_data.reason = ELS_RJT_PROT; + rjt_data.explan = ELS_EXPL_INV_LEN; +reject: + lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); +drop: fc_frame_free(rx_fp); } -- cgit v1.2.2 From 4dc7ccf7e9d9bca1989b840be9e8e84911387cf2 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:07:41 -0800 Subject: [SCSI] libfc: add definition for task attribute mask The FCP command header definition should define a mask for the task attribute field. This adds that #define. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- include/scsi/fc/fc_fcp.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h index 747e2c7d88d6..8e9b222251c2 100644 --- a/include/scsi/fc/fc_fcp.h +++ b/include/scsi/fc/fc_fcp.h @@ -76,6 +76,7 @@ struct fcp_cmnd32 { #define FCP_PTA_HEADQ 1 /* head of queue task attribute */ #define FCP_PTA_ORDERED 2 /* ordered task attribute */ #define FCP_PTA_ACA 4 /* auto. contigent allegiance */ +#define FCP_PTA_MASK 7 /* mask for task attribute field */ #define FCP_PRI_SHIFT 3 /* priority field starts in bit 3 */ #define FCP_PRI_RESVD_MASK 0x80 /* reserved bits in priority field */ -- cgit v1.2.2 From 2f2ac4a0df8c4beee6e4057a69fa973b6040a573 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:07:46 -0800 Subject: [SCSI] libfc: fix oops in point-to-point mode In point-to-point mode, if the PLOGI to the remote port times out, it can get deleted by the remote port module. Since there's no reference by the local port, lport->ptp_data points to a freed rport, and when the local port is reset and tries to logout again, an oops occurs in mutex_lock_nested(). Hold a reference count on the point-to-point rdata. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index d126ecfff704..fe8700f4326a 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -228,9 +228,12 @@ static void fc_lport_ptp_setup(struct fc_lport *lport, u64 remote_wwnn) { mutex_lock(&lport->disc.disc_mutex); - if (lport->ptp_rdata) + if (lport->ptp_rdata) { lport->tt.rport_logoff(lport->ptp_rdata); + kref_put(&lport->ptp_rdata->kref, lport->tt.rport_destroy); + } lport->ptp_rdata = lport->tt.rport_create(lport, remote_fid); + kref_get(&lport->ptp_rdata->kref); lport->ptp_rdata->ids.port_name = remote_wwpn; lport->ptp_rdata->ids.node_name = remote_wwnn; mutex_unlock(&lport->disc.disc_mutex); @@ -947,7 +950,11 @@ static void fc_lport_reset_locked(struct fc_lport *lport) if (lport->dns_rdata) lport->tt.rport_logoff(lport->dns_rdata); - lport->ptp_rdata = NULL; + if (lport->ptp_rdata) { + lport->tt.rport_logoff(lport->ptp_rdata); + kref_put(&lport->ptp_rdata->kref, lport->tt.rport_destroy); + lport->ptp_rdata = NULL; + } lport->tt.disc_stop(lport); -- cgit v1.2.2 From 9860eeb49748df86e784fea09bb47ed6ae594383 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:07:52 -0800 Subject: [SCSI] fcoe: call fcoe_ctlr_els_send even for ELS responses In point-to-point mode, the destination MAC address for the FLOGI response was zero because the LS_ACC for the FLOGI wasn't getting intercepted by FIP. Change to call fcoe_ctlr_els_send when sending any ELS, not just requests. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index f01b9b44e8aa..7b0bb6e39a9f 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -1444,7 +1444,7 @@ int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp) return 0; } - if (unlikely(fh->fh_r_ctl == FC_RCTL_ELS_REQ) && + if (unlikely(fh->fh_type == FC_TYPE_ELS) && fcoe_ctlr_els_send(&fcoe->ctlr, lport, skb)) return 0; -- cgit v1.2.2 From e49bf6145f50da2d95f9fab605ce74f8fb44cb16 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:07:57 -0800 Subject: [SCSI] libfcoe: fix debug message entering non-FIP mode The debug message that indicated we are using non-FIP mode was being printed only if we were already in non-FIP mode. Also changed the message text to make it more clear the mode is being set, not that the message is indicating how FLOGI was received. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 3440da48d169..22f6e44fa737 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -1334,9 +1334,9 @@ int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *fip, struct fc_lport *lport, if (fip->state == FIP_ST_AUTO || fip->state == FIP_ST_NON_FIP) { memcpy(fip->dest_addr, sa, ETH_ALEN); fip->map_dest = 0; - if (fip->state == FIP_ST_NON_FIP) - LIBFCOE_FIP_DBG(fip, "received FLOGI REQ, " - "using non-FIP mode\n"); + if (fip->state == FIP_ST_AUTO) + LIBFCOE_FIP_DBG(fip, "received non-FIP FLOGI. " + "Setting non-FIP mode\n"); fip->state = FIP_ST_NON_FIP; } spin_unlock_bh(&fip->lock); -- cgit v1.2.2 From 7d65b0df6c5951271cd368170bca8601aa2e65c7 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:08:02 -0800 Subject: [SCSI] fcoe: save gateway address when receiving FLOGI request In point-to-point mode, we need to save the source MAC from received FLOGI requests to use as the destination MAC for all outgoing frames. We stopped doing that at some point. Use the lport_set_port_id method to catch incoming FLOGI frames and pass them to fcoe_ctlr_recv_flogi() so it can save the source MAC. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 7b0bb6e39a9f..17bf3ca82aff 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -146,6 +146,7 @@ static int fcoe_vport_destroy(struct fc_vport *); static int fcoe_vport_create(struct fc_vport *, bool disabled); static int fcoe_vport_disable(struct fc_vport *, bool disable); static void fcoe_set_vport_symbolic_name(struct fc_vport *); +static void fcoe_set_port_id(struct fc_lport *, u32, struct fc_frame *); static struct libfc_function_template fcoe_libfc_fcn_templ = { .frame_send = fcoe_xmit, @@ -153,6 +154,7 @@ static struct libfc_function_template fcoe_libfc_fcn_templ = { .ddp_done = fcoe_ddp_done, .elsct_send = fcoe_elsct_send, .get_lesb = fcoe_get_lesb, + .lport_set_port_id = fcoe_set_port_id, }; struct fc_function_template fcoe_transport_function = { @@ -2631,3 +2633,25 @@ static void fcoe_get_lesb(struct fc_lport *lport, lesb->lesb_miss_fka = htonl(mdac); lesb->lesb_fcs_error = htonl(dev_get_stats(netdev)->rx_crc_errors); } + +/** + * fcoe_set_port_id() - Callback from libfc when Port_ID is set. + * @lport: the local port + * @port_id: the port ID + * @fp: the received frame, if any, that caused the port_id to be set. + * + * This routine handles the case where we received a FLOGI and are + * entering point-to-point mode. We need to call fcoe_ctlr_recv_flogi() + * so it can set the non-mapped mode and gateway address. + * + * The FLOGI LS_ACC is handled by fcoe_flogi_resp(). + */ +static void fcoe_set_port_id(struct fc_lport *lport, + u32 port_id, struct fc_frame *fp) +{ + struct fcoe_port *port = lport_priv(lport); + struct fcoe_interface *fcoe = port->fcoe; + + if (fp && fc_frame_payload_op(fp) == ELS_FLOGI) + fcoe_ctlr_recv_flogi(&fcoe->ctlr, lport, fp); +} -- cgit v1.2.2 From f4568b8b9766d083c0e61346173bb22274128208 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:08:07 -0800 Subject: [SCSI] libfc: recognize incoming FLOGI for point-to-point mode When receiving a FLOGI request from a point-to-point peer, the D_ID of 0xfffffe was not recognized as belonging to one of the lports, so it was dropped. Change fc_vport_id_lookup() to treat d_id 0xfffffe as a match. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_npiv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/libfc/fc_npiv.c b/drivers/scsi/libfc/fc_npiv.c index c68f6c7341c2..45b6f1e2df92 100644 --- a/drivers/scsi/libfc/fc_npiv.c +++ b/drivers/scsi/libfc/fc_npiv.c @@ -72,6 +72,9 @@ struct fc_lport *fc_vport_id_lookup(struct fc_lport *n_port, u32 port_id) if (fc_host_port_id(n_port->host) == port_id) return n_port; + if (port_id == FC_FID_FLOGI) + return n_port; /* for point-to-point */ + mutex_lock(&n_port->lp_mutex); list_for_each_entry(vn_port, &n_port->vports, list) { if (fc_host_port_id(vn_port->host) == port_id) { -- cgit v1.2.2 From ccfc3098029229d5298d4fc07f1b2c967526e56b Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:08:12 -0800 Subject: [SCSI] libfc: send point-to-poin FLOGI LS_ACC to assigned D_DID The method we've been using for point-to-point mode requires that the LS_ACC for the FLOGI uses the D_ID and S_ID assigned to the remote port and local port, not those in the exchange. This is not the correct method, but for now, it's what works with the old target, as well as with new targets based on libfc. This patch changes the addresses used accordingly. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index fe8700f4326a..a6cf94d44ef8 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -835,7 +835,7 @@ static void fc_lport_recv_flogi_req(struct fc_seq *sp_in, */ f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ; ep = fc_seq_exch(sp); - fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, + fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, remote_fid, local_fid, FC_TYPE_ELS, f_ctl, 0); lport->tt.seq_send(lport, sp, fp); -- cgit v1.2.2 From 50036bbae0ed4d4e610bd59e0ce285ed20c1bee6 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:08:18 -0800 Subject: [SCSI] fcoe: remove an unused variable in fcoe_recv_frame() Remove an unused variable, mac, in fcoe_recv_frame(). Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 17bf3ca82aff..fd0b2b3b27b8 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -1565,7 +1565,6 @@ static void fcoe_recv_frame(struct sk_buff *skb) struct fc_frame_header *fh; struct fcoe_crc_eof crc_eof; struct fc_frame *fp; - u8 *mac = NULL; struct fcoe_port *port; struct fcoe_hdr *hp; @@ -1585,13 +1584,9 @@ static void fcoe_recv_frame(struct sk_buff *skb) skb_end_pointer(skb), skb->csum, skb->dev ? skb->dev->name : ""); - /* - * Save source MAC address before discarding header. - */ port = lport_priv(lport); if (skb_is_nonlinear(skb)) skb_linearize(skb); /* not ideal */ - mac = eth_hdr(skb)->h_source; /* * Frame length checks and setting up the header pointers -- cgit v1.2.2 From 4291365784c9622c9d643cf23421f9c7b9662d71 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:08:23 -0800 Subject: [SCSI] libfcoe: eliminate unused link and last_link fields The link and last_link fields in the fcoe_ctlr struct are no longer useful, since they are always set to the same value, and FIP always calls libfc to pass link information to the lport. Eliminate those fields and rename link_work to timer_work, since it no longer has any link change work to do. Thanks to Brian Uchino for discovering this issue. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 40 +++++++++++----------------------------- include/scsi/libfcoe.h | 8 ++------ 2 files changed, 13 insertions(+), 35 deletions(-) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 22f6e44fa737..b7718be3c096 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -51,7 +51,7 @@ MODULE_LICENSE("GPL v2"); #define FCOE_CTLR_DEF_FKA FIP_DEF_FKA /* default keep alive (mS) */ static void fcoe_ctlr_timeout(unsigned long); -static void fcoe_ctlr_link_work(struct work_struct *); +static void fcoe_ctlr_timer_work(struct work_struct *); static void fcoe_ctlr_recv_work(struct work_struct *); static u8 fcoe_all_fcfs[ETH_ALEN] = FIP_ALL_FCF_MACS; @@ -116,7 +116,7 @@ void fcoe_ctlr_init(struct fcoe_ctlr *fip) spin_lock_init(&fip->lock); fip->flogi_oxid = FC_XID_UNKNOWN; setup_timer(&fip->timer, fcoe_ctlr_timeout, (unsigned long)fip); - INIT_WORK(&fip->link_work, fcoe_ctlr_link_work); + INIT_WORK(&fip->timer_work, fcoe_ctlr_timer_work); INIT_WORK(&fip->recv_work, fcoe_ctlr_recv_work); skb_queue_head_init(&fip->fip_recv_list); } @@ -164,7 +164,7 @@ void fcoe_ctlr_destroy(struct fcoe_ctlr *fip) fcoe_ctlr_reset_fcfs(fip); spin_unlock_bh(&fip->lock); del_timer_sync(&fip->timer); - cancel_work_sync(&fip->link_work); + cancel_work_sync(&fip->timer_work); } EXPORT_SYMBOL(fcoe_ctlr_destroy); @@ -257,14 +257,10 @@ void fcoe_ctlr_link_up(struct fcoe_ctlr *fip) { spin_lock_bh(&fip->lock); if (fip->state == FIP_ST_NON_FIP || fip->state == FIP_ST_AUTO) { - fip->last_link = 1; - fip->link = 1; spin_unlock_bh(&fip->lock); fc_linkup(fip->lp); } else if (fip->state == FIP_ST_LINK_WAIT) { fip->state = fip->mode; - fip->last_link = 1; - fip->link = 1; spin_unlock_bh(&fip->lock); if (fip->state == FIP_ST_AUTO) LIBFCOE_FIP_DBG(fip, "%s", "setting AUTO mode.\n"); @@ -306,9 +302,7 @@ int fcoe_ctlr_link_down(struct fcoe_ctlr *fip) LIBFCOE_FIP_DBG(fip, "link down.\n"); spin_lock_bh(&fip->lock); fcoe_ctlr_reset(fip); - link_dropped = fip->link; - fip->link = 0; - fip->last_link = 0; + link_dropped = fip->state != FIP_ST_LINK_WAIT; fip->state = FIP_ST_LINK_WAIT; spin_unlock_bh(&fip->lock); @@ -1175,7 +1169,7 @@ static void fcoe_ctlr_timeout(unsigned long arg) "Starting FCF discovery.\n", fip->lp->host->host_no); fip->reset_req = 1; - schedule_work(&fip->link_work); + schedule_work(&fip->timer_work); } } @@ -1201,43 +1195,31 @@ static void fcoe_ctlr_timeout(unsigned long arg) mod_timer(&fip->timer, next_timer); } if (fip->send_ctlr_ka || fip->send_port_ka) - schedule_work(&fip->link_work); + schedule_work(&fip->timer_work); spin_unlock_bh(&fip->lock); } /** - * fcoe_ctlr_link_work() - Worker thread function for link changes + * fcoe_ctlr_timer_work() - Worker thread function for timer work * @work: Handle to a FCoE controller * - * See if the link status has changed and if so, report it. - * - * This is here because fc_linkup() and fc_linkdown() must not + * Sends keep-alives and resets which must not * be called from the timer directly, since they use a mutex. */ -static void fcoe_ctlr_link_work(struct work_struct *work) +static void fcoe_ctlr_timer_work(struct work_struct *work) { struct fcoe_ctlr *fip; struct fc_lport *vport; u8 *mac; - int link; - int last_link; int reset; - fip = container_of(work, struct fcoe_ctlr, link_work); + fip = container_of(work, struct fcoe_ctlr, timer_work); spin_lock_bh(&fip->lock); - last_link = fip->last_link; - link = fip->link; - fip->last_link = link; reset = fip->reset_req; fip->reset_req = 0; spin_unlock_bh(&fip->lock); - if (last_link != link) { - if (link) - fc_linkup(fip->lp); - else - fc_linkdown(fip->lp); - } else if (reset && link) + if (reset) fc_lport_reset(fip->lp); if (fip->send_ctlr_ka) { diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index c603f4a7e7fc..868ed26a9767 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -65,14 +65,12 @@ enum fip_state { * @port_ka_time: time of next port keep-alive. * @ctlr_ka_time: time of next controller keep-alive. * @timer: timer struct used for all delayed events. - * @link_work: &work_struct for doing FCF selection. + * @timer_work: &work_struct for doing keep-alives and resets. * @recv_work: &work_struct for receiving FIP frames. * @fip_recv_list: list of received FIP frames. * @user_mfs: configured maximum FC frame size, including FC header. * @flogi_oxid: exchange ID of most recent fabric login. * @flogi_count: number of FLOGI attempts in AUTO mode. - * @link: current link status for libfc. - * @last_link: last link state reported to libfc. * @map_dest: use the FC_MAP mode for destination MAC addresses. * @spma: supports SPMA server-provided MACs mode * @send_ctlr_ka: need to send controller keep alive @@ -100,14 +98,12 @@ struct fcoe_ctlr { unsigned long port_ka_time; unsigned long ctlr_ka_time; struct timer_list timer; - struct work_struct link_work; + struct work_struct timer_work; struct work_struct recv_work; struct sk_buff_head fip_recv_list; u16 user_mfs; u16 flogi_oxid; u8 flogi_count; - u8 link; - u8 last_link; u8 reset_req; u8 map_dest; u8 spma; -- cgit v1.2.2 From cc3593d3882ffa7dfaa739a8302b256955be7d99 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:08:29 -0800 Subject: [SCSI] libfc: fix sequence-initiative WARN in fc_seq_start_next When starting a new response sequence in a multi-sequence exchange, a warning was issued that sequence initiative wasn't held. The bug was that sequence initiative was cleared by the previous sequence due to the END_SEQ flag being on. The intent may have been to check LAST_SEQ. Change just to check SEQ_INIT. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index e5df0d4db67e..7cc084cf9950 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -488,7 +488,7 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp, */ spin_lock_bh(&ep->ex_lock); ep->f_ctl = f_ctl & ~FC_FC_FIRST_SEQ; /* not first seq */ - if (f_ctl & (FC_FC_END_SEQ | FC_FC_SEQ_INIT)) + if (f_ctl & FC_FC_SEQ_INIT) ep->esb_stat &= ~ESB_ST_SEQ_INIT; spin_unlock_bh(&ep->ex_lock); return error; -- cgit v1.2.2 From a104c844576c6bdc44c6f1336e30a5fcd90fef1c Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 12 Mar 2010 16:08:34 -0800 Subject: [SCSI] libfc: fixes unnecessary seq id jump In some cases seq is incremented twice causing unnecessary seq jump, for instance fc_exch_recv_seq_resp increments seq id when fc_sof_is_init is true and that is true for each incoming xfer ready but then fc_fcp_send_data does another seq increment to send data for xfer ready. This patch removes all such seq id jumps, at least it eliminates few calls to fc_seq_start_next using ex_lock. Also removes seq id update with incoming frame's seq id as this is not needed since each end (I or T) just need to send incremented their own seq id on each TSI from other end & before sending new sequence within a exchange. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 7cc084cf9950..981021edfba9 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -920,12 +920,7 @@ static enum fc_pf_rjt_reason fc_seq_lookup_recip(struct fc_lport *lport, * Find or create the sequence. */ if (fc_sof_is_init(fr_sof(fp))) { - sp = fc_seq_start_next(&ep->seq); - if (!sp) { - reject = FC_RJT_SEQ_XS; /* exchange shortage */ - goto rel; - } - sp->id = fh->fh_seq_id; + sp = &ep->seq; sp->ssb_stat |= SSB_ST_RESP; } else { sp = &ep->seq; @@ -1336,17 +1331,14 @@ static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) goto rel; } sof = fr_sof(fp); - if (fc_sof_is_init(sof)) { - sp = fc_seq_start_next(&ep->seq); - sp->id = fh->fh_seq_id; + sp = &ep->seq; + if (fc_sof_is_init(sof)) sp->ssb_stat |= SSB_ST_RESP; - } else { - sp = &ep->seq; - if (sp->id != fh->fh_seq_id) { + else if (sp->id != fh->fh_seq_id) { atomic_inc(&mp->stats.seq_not_found); goto rel; - } } + f_ctl = ntoh24(fh->fh_f_ctl); fr_seq(fp) = sp; if (f_ctl & FC_FC_SEQ_INIT) @@ -1763,7 +1755,6 @@ static void fc_exch_els_rec(struct fc_seq *sp, struct fc_frame *rfp) fc_exch_done(sp); goto out; } - sp = fc_seq_start_next(sp); acc = fc_frame_payload_get(fp, sizeof(*acc)); memset(acc, 0, sizeof(*acc)); acc->reca_cmd = ELS_LS_ACC; -- cgit v1.2.2 From 3e22760d4db6fd89e0be46c3d132390a251da9c6 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 12 Mar 2010 16:08:39 -0800 Subject: [SCSI] libfc: use offload EM instance again instead jumping to next EM Since use of offloads is more efficient than switching to non-offload EM. However kept logic same to call em_match if it is provided in the list of EMs. Converted fc_exch_alloc to inline being now tiny a function and already not an exported libfc API any more. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 981021edfba9..dc12a2bf0c9b 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -734,19 +734,14 @@ err: * EM is selected when a NULL match function pointer is encountered * or when a call to a match function returns true. */ -static struct fc_exch *fc_exch_alloc(struct fc_lport *lport, - struct fc_frame *fp) +static inline struct fc_exch *fc_exch_alloc(struct fc_lport *lport, + struct fc_frame *fp) { struct fc_exch_mgr_anchor *ema; - struct fc_exch *ep; - list_for_each_entry(ema, &lport->ema_list, ema_list) { - if (!ema->match || ema->match(fp)) { - ep = fc_exch_em_alloc(lport, ema->mp); - if (ep) - return ep; - } - } + list_for_each_entry(ema, &lport->ema_list, ema_list) + if (!ema->match || ema->match(fp)) + return fc_exch_em_alloc(lport, ema->mp); return NULL; } -- cgit v1.2.2 From 5c12c418e905aac2826bb70f947648944c079ed9 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 12 Mar 2010 16:08:44 -0800 Subject: [SCSI] libfc: fix fcp pkt recovery in fc_fcp_recv_data Currently fc_fcp_recv_data calls fc_fcp_retry_cmd to retry failed IO but in this case tgt is still sending data frames, therefore exchange needs to be aborted first before initiating retry. So this patch fixes this by aborting exchange first then have retry. Renames fc_timeout_error to fc_fcp_recovery since fc_timeout_error is already called from several other places beside from fcp timeout handler and then used fc_fcp_recovery for abort & retry from fc_fcp_recv_data, this rename also required renaming FC_CMD_TIME_OUT status to FC_CMD_RECOVERY to be consistent with new fc_fcp_recovery. Data frames are not expected for an DDPed exchange and potentially it could be tampered data frame, so does recovery in this case by calling fc_fcp_recovery. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_fcp.c | 47 +++++++++++++++++++++++++++------------------ 1 file changed, 28 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 17396c708b08..39f18e39125c 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -97,7 +97,7 @@ static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *); static void fc_fcp_complete_locked(struct fc_fcp_pkt *); static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *); static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *); -static void fc_timeout_error(struct fc_fcp_pkt *); +static void fc_fcp_recovery(struct fc_fcp_pkt *); static void fc_fcp_timeout(unsigned long); static void fc_fcp_rec(struct fc_fcp_pkt *); static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *); @@ -121,7 +121,7 @@ static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *); #define FC_DATA_UNDRUN 7 #define FC_ERROR 8 #define FC_HRD_ERROR 9 -#define FC_CMD_TIME_OUT 10 +#define FC_CMD_RECOVERY 10 /* * Error recovery timeout values. @@ -446,9 +446,16 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp) len = fr_len(fp) - sizeof(*fh); buf = fc_frame_payload_get(fp, 0); - /* if this I/O is ddped, update xfer len */ - fc_fcp_ddp_done(fsp); - + /* + * if this I/O is ddped then clear it + * and initiate recovery since data + * frames are expected to be placed + * directly in that case. + */ + if (fsp->xfer_ddp != FC_XID_UNKNOWN) { + fc_fcp_ddp_done(fsp); + goto err; + } if (offset + len > fsp->data_len) { /* this should never happen */ if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) && @@ -456,8 +463,7 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp) goto crc_err; FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx " "data_len %x\n", len, offset, fsp->data_len); - fc_fcp_retry_cmd(fsp); - return; + goto err; } if (offset != fsp->xfer_len) fsp->state |= FC_SRB_DISCONTIG; @@ -493,7 +499,7 @@ crc_err: * Otherwise, ignore it. */ if (fsp->state & FC_SRB_DISCONTIG) - fc_fcp_retry_cmd(fsp); + goto err; return; } } @@ -509,6 +515,9 @@ crc_err: if (unlikely(fsp->state & FC_SRB_RCV_STATUS) && fsp->xfer_len == fsp->data_len - fsp->scsi_resid) fc_fcp_complete_locked(fsp); + return; +err: + fc_fcp_recovery(fsp); } /** @@ -1341,7 +1350,7 @@ static void fc_fcp_timeout(unsigned long data) else if (fsp->state & FC_SRB_RCV_STATUS) fc_fcp_complete_locked(fsp); else - fc_timeout_error(fsp); + fc_fcp_recovery(fsp); fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO; unlock: fc_fcp_unlock_pkt(fsp); @@ -1385,7 +1394,7 @@ retry: if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV); else - fc_timeout_error(fsp); + fc_fcp_recovery(fsp); } /** @@ -1454,7 +1463,7 @@ static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) fc_fcp_retry_cmd(fsp); break; } - fc_timeout_error(fsp); + fc_fcp_recovery(fsp); break; } } else if (opcode == ELS_LS_ACC) { @@ -1569,7 +1578,7 @@ static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) fc_fcp_rec(fsp); else - fc_timeout_error(fsp); + fc_fcp_recovery(fsp); break; } fc_fcp_unlock_pkt(fsp); @@ -1578,12 +1587,12 @@ out: } /** - * fc_timeout_error() - Handler for fcp_pkt timeouts - * @fsp: The FCP packt that has timed out + * fc_fcp_recovery() - Handler for fcp_pkt recovery + * @fsp: The FCP pkt that needs to be aborted */ -static void fc_timeout_error(struct fc_fcp_pkt *fsp) +static void fc_fcp_recovery(struct fc_fcp_pkt *fsp) { - fsp->status_code = FC_CMD_TIME_OUT; + fsp->status_code = FC_CMD_RECOVERY; fsp->cdb_status = 0; fsp->io_status = 0; /* @@ -1689,7 +1698,7 @@ static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) break; case ELS_LS_RJT: default: - fc_timeout_error(fsp); + fc_fcp_recovery(fsp); break; } fc_fcp_unlock_pkt(fsp); @@ -1715,7 +1724,7 @@ static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) fc_fcp_rec(fsp); else - fc_timeout_error(fsp); + fc_fcp_recovery(fsp); break; case -FC_EX_CLOSED: /* e.g., link failure */ /* fall through */ @@ -1934,7 +1943,7 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) case FC_CMD_ABORTED: sc_cmd->result = (DID_ERROR << 16) | fsp->io_status; break; - case FC_CMD_TIME_OUT: + case FC_CMD_RECOVERY: sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status; break; case FC_CMD_RESET: -- cgit v1.2.2 From b3ef990c1514859bffae221b9e82e46a38f1e7bf Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 12 Mar 2010 16:08:50 -0800 Subject: [SCSI] libfc: Add debug statements when fc_fcp returns DID_ERROR to scsi-ml DID_ERROR cases can be ambigouos. Debugging FCP error cases will be much easier if we have debug statements when we hit these error conditions. This patch simply adds debug messages using the FC_FCP_DBG macro when we return DID_ERROR to SCSI. This way if a DID_ERROR is reproducible turning on debug_logging will give a clue to developers as to what the problem might be. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_fcp.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 39f18e39125c..044c420a1371 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1916,6 +1916,8 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) } break; case FC_ERROR: + FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " + "due to FC_ERROR\n"); sc_cmd->result = DID_ERROR << 16; break; case FC_DATA_UNDRUN: @@ -1924,12 +1926,19 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) * scsi status is good but transport level * underrun. */ - sc_cmd->result = (fsp->state & FC_SRB_RCV_STATUS ? - DID_OK : DID_ERROR) << 16; + if (fsp->state & FC_SRB_RCV_STATUS) { + sc_cmd->result = DID_OK << 16; + } else { + FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml" + " due to FC_DATA_UNDRUN (trans)\n"); + sc_cmd->result = DID_ERROR << 16; + } } else { /* * scsi got underrun, this is an error */ + FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " + "due to FC_DATA_UNDRUN (scsi)\n"); CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid; sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status; } @@ -1938,9 +1947,13 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) /* * overrun is an error */ + FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " + "due to FC_DATA_OVRRUN\n"); sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status; break; case FC_CMD_ABORTED: + FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " + "due to FC_CMD_ABORTED\n"); sc_cmd->result = (DID_ERROR << 16) | fsp->io_status; break; case FC_CMD_RECOVERY: @@ -1953,6 +1966,8 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp) sc_cmd->result = (DID_NO_CONNECT << 16); break; default: + FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml " + "due to unknown error\n"); sc_cmd->result = (DID_ERROR << 16); break; } -- cgit v1.2.2 From f018b73af6db4f330ad5da9ac53997a699c30c42 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 12 Mar 2010 16:08:55 -0800 Subject: [SCSI] libfc, libfcoe, fcoe: use smp_processor_id() only when preempt disabled When the kernel is configured for preemption, using smp_processor_id() when preemption is enabled causes a warning backtrace and is wrong since we could move off of that CPU as soon as we get the ID, and we would be referencing the wrong CPU, and possibly an invalid one if it could be hotswapped out. Remove the fc_lport_get_stats() function and explicitly use per_cpu_ptr() to get the statistics. Where preemption has been disabled by holding a _bh lock continue to use smp_processor_id(), but otherwise use get_cpu()/put_cpu(). In fcoe_recv_frame() also changed the cases where we return in the middle to do a goto to the code which bumps ErrorFrames and does a put_cpu(). Two of these cases didn't bump ErrorFrames before, but doing so is harmless because they "can't happen", due to prior length checks. Also rearranged code in fcoe_recv_frame() to have only one call to fc_exch_recv(). It's just as efficient and saves a call to put_cpu(). In fc_fcp.c, adjusted a FIXME comment for code which doesn't need fixing. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 51 ++++++++++++++++++++++---------------------- drivers/scsi/fcoe/libfcoe.c | 19 +++++++++++------ drivers/scsi/libfc/fc_exch.c | 3 ++- drivers/scsi/libfc/fc_fcp.c | 8 ++++--- include/scsi/libfc.h | 9 -------- 5 files changed, 45 insertions(+), 45 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index fd0b2b3b27b8..927b3e63d871 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -1075,7 +1075,7 @@ static void fcoe_percpu_thread_destroy(unsigned int cpu) struct sk_buff *skb; #ifdef CONFIG_SMP struct fcoe_percpu_s *p0; - unsigned targ_cpu = smp_processor_id(); + unsigned targ_cpu = get_cpu(); #endif /* CONFIG_SMP */ FCOE_DBG("Destroying receive thread for CPU %d\n", cpu); @@ -1131,6 +1131,7 @@ static void fcoe_percpu_thread_destroy(unsigned int cpu) kfree_skb(skb); spin_unlock_bh(&p->fcoe_rx_list.lock); } + put_cpu(); #else /* * This a non-SMP scenario where the singular Rx thread is @@ -1299,8 +1300,8 @@ int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev, return 0; err: - fc_lport_get_stats(lport)->ErrorFrames++; - + per_cpu_ptr(lport->dev_stats, get_cpu())->ErrorFrames++; + put_cpu(); err2: kfree_skb(skb); return -1; @@ -1529,9 +1530,10 @@ int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp) skb_shinfo(skb)->gso_size = 0; } /* update tx stats: regardless if LLD fails */ - stats = fc_lport_get_stats(lport); + stats = per_cpu_ptr(lport->dev_stats, get_cpu()); stats->TxFrames++; stats->TxWords += wlen; + put_cpu(); /* send down to lld */ fr_dev(fp) = lport; @@ -1595,7 +1597,7 @@ static void fcoe_recv_frame(struct sk_buff *skb) hp = (struct fcoe_hdr *) skb_network_header(skb); fh = (struct fc_frame_header *) skb_transport_header(skb); - stats = fc_lport_get_stats(lport); + stats = per_cpu_ptr(lport->dev_stats, get_cpu()); if (unlikely(FC_FCOE_DECAPS_VER(hp) != FC_FCOE_VER)) { if (stats->ErrorFrames < 5) printk(KERN_WARNING "fcoe: FCoE version " @@ -1604,9 +1606,7 @@ static void fcoe_recv_frame(struct sk_buff *skb) "initiator supports version " "%x\n", FC_FCOE_DECAPS_VER(hp), FC_FCOE_VER); - stats->ErrorFrames++; - kfree_skb(skb); - return; + goto drop; } skb_pull(skb, sizeof(struct fcoe_hdr)); @@ -1621,16 +1621,12 @@ static void fcoe_recv_frame(struct sk_buff *skb) fr_sof(fp) = hp->fcoe_sof; /* Copy out the CRC and EOF trailer for access */ - if (skb_copy_bits(skb, fr_len, &crc_eof, sizeof(crc_eof))) { - kfree_skb(skb); - return; - } + if (skb_copy_bits(skb, fr_len, &crc_eof, sizeof(crc_eof))) + goto drop; fr_eof(fp) = crc_eof.fcoe_eof; fr_crc(fp) = crc_eof.fcoe_crc32; - if (pskb_trim(skb, fr_len)) { - kfree_skb(skb); - return; - } + if (pskb_trim(skb, fr_len)) + goto drop; /* * We only check CRC if no offload is available and if it is @@ -1644,25 +1640,27 @@ static void fcoe_recv_frame(struct sk_buff *skb) fr_flags(fp) |= FCPHF_CRC_UNCHECKED; fh = fc_frame_header_get(fp); - if (fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA && - fh->fh_type == FC_TYPE_FCP) { - fc_exch_recv(lport, fp); - return; - } - if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) { + if ((fh->fh_r_ctl != FC_RCTL_DD_SOL_DATA || + fh->fh_type != FC_TYPE_FCP) && + (fr_flags(fp) & FCPHF_CRC_UNCHECKED)) { if (le32_to_cpu(fr_crc(fp)) != ~crc32(~0, skb->data, fr_len)) { if (stats->InvalidCRCCount < 5) printk(KERN_WARNING "fcoe: dropping " "frame with CRC error\n"); stats->InvalidCRCCount++; - stats->ErrorFrames++; - fc_frame_free(fp); - return; + goto drop; } fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED; } + put_cpu(); fc_exch_recv(lport, fp); + return; + +drop: + stats->ErrorFrames++; + put_cpu(); + kfree_skb(skb); } /** @@ -1835,8 +1833,9 @@ static int fcoe_device_notification(struct notifier_block *notifier, if (link_possible && !fcoe_link_ok(lport)) fcoe_ctlr_link_up(&fcoe->ctlr); else if (fcoe_ctlr_link_down(&fcoe->ctlr)) { - stats = fc_lport_get_stats(lport); + stats = per_cpu_ptr(lport->dev_stats, get_cpu()); stats->LinkFailureCount++; + put_cpu(); fcoe_clean_pending_queue(lport); } out: diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index b7718be3c096..ff5ccba3d741 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -550,7 +550,7 @@ EXPORT_SYMBOL(fcoe_ctlr_els_send); * fcoe_ctlr_age_fcfs() - Reset and free all old FCFs for a controller * @fip: The FCoE controller to free FCFs on * - * Called with lock held. + * Called with lock held and preemption disabled. * * An FCF is considered old if we have missed three advertisements. * That is, there have been no valid advertisement from it for three @@ -567,17 +567,20 @@ static void fcoe_ctlr_age_fcfs(struct fcoe_ctlr *fip) struct fcoe_fcf *next; unsigned long sel_time = 0; unsigned long mda_time = 0; + struct fcoe_dev_stats *stats; list_for_each_entry_safe(fcf, next, &fip->fcfs, list) { mda_time = fcf->fka_period + (fcf->fka_period >> 1); if ((fip->sel_fcf == fcf) && (time_after(jiffies, fcf->time + mda_time))) { mod_timer(&fip->timer, jiffies + mda_time); - fc_lport_get_stats(fip->lp)->MissDiscAdvCount++; + stats = per_cpu_ptr(fip->lp->dev_stats, + smp_processor_id()); + stats->MissDiscAdvCount++; printk(KERN_INFO "libfcoe: host%d: Missing Discovery " "Advertisement for fab %llx count %lld\n", fip->lp->host->host_no, fcf->fabric_name, - fc_lport_get_stats(fip->lp)->MissDiscAdvCount); + stats->MissDiscAdvCount); } if (time_after(jiffies, fcf->time + fcf->fka_period * 3 + msecs_to_jiffies(FIP_FCF_FUZZ * 3))) { @@ -587,7 +590,9 @@ static void fcoe_ctlr_age_fcfs(struct fcoe_ctlr *fip) WARN_ON(!fip->fcf_count); fip->fcf_count--; kfree(fcf); - fc_lport_get_stats(fip->lp)->VLinkFailureCount++; + stats = per_cpu_ptr(fip->lp->dev_stats, + smp_processor_id()); + stats->VLinkFailureCount++; } else if (fcoe_ctlr_mtu_valid(fcf) && (!sel_time || time_before(sel_time, fcf->time))) { sel_time = fcf->time; @@ -900,9 +905,10 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb) fr_eof(fp) = FC_EOF_T; fr_dev(fp) = lport; - stats = fc_lport_get_stats(lport); + stats = per_cpu_ptr(lport->dev_stats, get_cpu()); stats->RxFrames++; stats->RxWords += skb->len / FIP_BPW; + put_cpu(); fc_exch_recv(lport, fp); return; @@ -1000,7 +1006,8 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, LIBFCOE_FIP_DBG(fip, "performing Clear Virtual Link\n"); spin_lock_bh(&fip->lock); - fc_lport_get_stats(lport)->VLinkFailureCount++; + per_cpu_ptr(lport->dev_stats, + smp_processor_id())->VLinkFailureCount++; fcoe_ctlr_reset(fip); spin_unlock_bh(&fip->lock); diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index dc12a2bf0c9b..d0496dafd84a 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -676,9 +676,10 @@ static struct fc_exch *fc_exch_em_alloc(struct fc_lport *lport, } memset(ep, 0, sizeof(*ep)); - cpu = smp_processor_id(); + cpu = get_cpu(); pool = per_cpu_ptr(mp->pool, cpu); spin_lock_bh(&pool->lock); + put_cpu(); index = pool->next_index; /* allocate new exch from pool */ while (fc_exch_ptr_get(pool, index)) { diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 044c420a1371..220c4bc536ca 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -484,13 +484,14 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp) if (~crc != le32_to_cpu(fr_crc(fp))) { crc_err: - stats = fc_lport_get_stats(lport); + stats = per_cpu_ptr(lport->dev_stats, get_cpu()); stats->ErrorFrames++; - /* FIXME - per cpu count, not total count! */ + /* per cpu count, not total count, but OK for limit */ if (stats->InvalidCRCCount++ < 5) printk(KERN_WARNING "libfc: CRC error on data " "frame for port (%6x)\n", fc_host_port_id(lport->host)); + put_cpu(); /* * Assume the frame is total garbage. * We may have copied it over the good part @@ -1819,7 +1820,7 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *)) /* * setup the data direction */ - stats = fc_lport_get_stats(lport); + stats = per_cpu_ptr(lport->dev_stats, get_cpu()); if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) { fsp->req_flags = FC_SRB_READ; stats->InputRequests++; @@ -1832,6 +1833,7 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *)) fsp->req_flags = 0; stats->ControlRequests++; } + put_cpu(); fsp->tgt_flags = rpriv->flags; diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 4b912eee33e5..8d0d1b2d8258 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -917,15 +917,6 @@ static inline void fc_lport_free_stats(struct fc_lport *lport) free_percpu(lport->dev_stats); } -/** - * fc_lport_get_stats() - Get a local port's statistics - * @lport: The local port whose statistics are to be retreived - */ -static inline struct fcoe_dev_stats *fc_lport_get_stats(struct fc_lport *lport) -{ - return per_cpu_ptr(lport->dev_stats, smp_processor_id()); -} - /** * lport_priv() - Return the private data from a local port * @lport: The local port whose private data is to be retreived -- cgit v1.2.2 From 65c054f235fda2d545ecd2a7948906a3cf0c1f39 Mon Sep 17 00:00:00 2001 From: Kei Tokunaga Date: Mon, 15 Mar 2010 14:48:43 +0900 Subject: [SCSI] mpt: modify mptctl_exit() to call proper deregister functions This patch fixes some issues of mptctl_exit(). 1) It doesn't call mpt_deregister() for mptctl_taskmgmt_id => Insmoding/rmmoding mptctl.ko repeadtedly (up to MPT_MAX_PROTOCOL_DRIVERS-1 at most) can eat up all cb_idx, and that would cause a lack of MptCallbacks[], MptDriverClass[], and MptEvHandlers[]. 2) It doesn't call mpt_event_deregister() for mptctl_id => Need to call it. 3) It calls mpt_reset_deregister() for mptctl_taskmgmt_id => This could accidentally deregister an innocent reset handler that you don't want to. This patch also adds a check for mptctl_taskmgmt_id. Signed-off-by: Kei Tokunaga Acked-by: "Desai, Kashyap" Signed-off-by: James Bottomley --- drivers/message/fusion/mptctl.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index caa8f568a41c..80421d2cf049 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -2991,6 +2991,14 @@ static int __init mptctl_init(void) } mptctl_taskmgmt_id = mpt_register(mptctl_taskmgmt_reply, MPTCTL_DRIVER); + if (!mptctl_taskmgmt_id || mptctl_taskmgmt_id >= MPT_MAX_PROTOCOL_DRIVERS) { + printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n"); + mpt_deregister(mptctl_id); + misc_deregister(&mptctl_miscdev); + err = -EBUSY; + goto out_fail; + } + mpt_reset_register(mptctl_id, mptctl_ioc_reset); mpt_event_register(mptctl_id, mptctl_event_process); @@ -3010,12 +3018,15 @@ static void mptctl_exit(void) printk(KERN_INFO MYNAM ": Deregistered /dev/%s @ (major,minor=%d,%d)\n", mptctl_miscdev.name, MISC_MAJOR, mptctl_miscdev.minor); + /* De-register event handler from base module */ + mpt_event_deregister(mptctl_id); + /* De-register reset handler from base module */ mpt_reset_deregister(mptctl_id); /* De-register callback handler from base module */ + mpt_deregister(mptctl_taskmgmt_id); mpt_deregister(mptctl_id); - mpt_reset_deregister(mptctl_taskmgmt_id); mpt_device_driver_deregister(MPTCTL_DRIVER); -- cgit v1.2.2 From 999d813f227435c35b44362ee82211a1458844fc Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 15 Mar 2010 11:24:56 -0400 Subject: [SCSI] lpfc 8.3.11: FCF failover improvements FCF failover improvements - Add random FCF failover when there are multiple FCFs available. - Prevent FCF log messages from being displayed for FC adapters. - Separate the New FCF and Modified FCF log messages. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_els.c | 13 ++++++---- drivers/scsi/lpfc/lpfc_hbadisc.c | 53 ++++++++++++++++++++++++++++++++++++++-- drivers/scsi/lpfc/lpfc_init.c | 19 ++++++++++---- drivers/scsi/lpfc/lpfc_sli.c | 4 ++- drivers/scsi/lpfc/lpfc_sli4.h | 1 + 5 files changed, 77 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 5fbdb22c1899..0a337dab211c 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -893,11 +893,14 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, if (!rc) { /* Mark the FCF discovery process done */ - lpfc_printf_vlog(vport, KERN_INFO, LOG_FIP | LOG_ELS, - "2769 FLOGI successful on FCF record: " - "current_fcf_index:x%x, terminate FCF " - "round robin failover process\n", - phba->fcf.current_rec.fcf_indx); + if (phba->hba_flag & HBA_FIP_SUPPORT) + lpfc_printf_vlog(vport, KERN_INFO, LOG_FIP | + LOG_ELS, + "2769 FLOGI successful on FCF " + "record: current_fcf_index:" + "x%x, terminate FCF round " + "robin failover process\n", + phba->fcf.current_rec.fcf_indx); spin_lock_irq(&phba->hbalock); phba->fcf.fcf_flag &= ~FCF_DISCOVERY; spin_unlock_irq(&phba->hbalock); diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index e1466eec56b7..362730b6dd85 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1531,7 +1531,37 @@ lpfc_check_pending_fcoe_event(struct lpfc_hba *phba, uint8_t unreg_fcf) } /** - * lpfc_sli4_fcf_rec_mbox_parse - parse non-embedded fcf record mailbox command + * lpfc_sli4_new_fcf_random_select - Randomly select an eligible new fcf record + * @phba: pointer to lpfc hba data structure. + * @fcf_cnt: number of eligible fcf record seen so far. + * + * This function makes an running random selection decision on FCF record to + * use through a sequence of @fcf_cnt eligible FCF records with equal + * probability. To perform integer manunipulation of random numbers with + * size unit32_t, the lower 16 bits of the 32-bit random number returned + * from random32() are taken as the random random number generated. + * + * Returns true when outcome is for the newly read FCF record should be + * chosen; otherwise, return false when outcome is for keeping the previously + * chosen FCF record. + **/ +static bool +lpfc_sli4_new_fcf_random_select(struct lpfc_hba *phba, uint32_t fcf_cnt) +{ + uint32_t rand_num; + + /* Get 16-bit uniform random number */ + rand_num = (0xFFFF & random32()); + + /* Decision with probability 1/fcf_cnt */ + if ((fcf_cnt * rand_num) < 0xFFFF) + return true; + else + return false; +} + +/** + * lpfc_mbx_cmpl_read_fcf_record - Completion handler for read_fcf mbox. * @phba: pointer to lpfc hba data structure. * @mboxq: pointer to mailbox object. * @next_fcf_index: pointer to holder of next fcf index. @@ -1679,6 +1709,8 @@ lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) uint16_t fcf_index, next_fcf_index; struct lpfc_fcf_rec *fcf_rec = NULL; uint16_t vlan_id; + uint32_t seed; + bool select_new_fcf; int rc; /* If there is pending FCoE event restart FCF table scan */ @@ -1809,9 +1841,21 @@ lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) * than the driver FCF record, use the new record. */ if (new_fcf_record->fip_priority < fcf_rec->priority) { - /* Choose this FCF record */ + /* Choose the new FCF record with lower priority */ __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, addr_mode, vlan_id, 0); + /* Reset running random FCF selection count */ + phba->fcf.eligible_fcf_cnt = 1; + } else if (new_fcf_record->fip_priority == fcf_rec->priority) { + /* Update running random FCF selection count */ + phba->fcf.eligible_fcf_cnt++; + select_new_fcf = lpfc_sli4_new_fcf_random_select(phba, + phba->fcf.eligible_fcf_cnt); + if (select_new_fcf) + /* Choose the new FCF by random selection */ + __lpfc_update_fcf_record(phba, fcf_rec, + new_fcf_record, + addr_mode, vlan_id, 0); } spin_unlock_irq(&phba->hbalock); goto read_next_fcf; @@ -1825,6 +1869,11 @@ lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) addr_mode, vlan_id, (boot_flag ? BOOT_ENABLE : 0)); phba->fcf.fcf_flag |= FCF_AVAILABLE; + /* Setup initial running random FCF selection count */ + phba->fcf.eligible_fcf_cnt = 1; + /* Seeding the random number generator for random selection */ + seed = (uint32_t)(0xFFFFFFFF & jiffies); + srandom32(seed); } spin_unlock_irq(&phba->hbalock); goto read_next_fcf; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 774663e8e1fe..25ee8cc6ab7a 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -3304,11 +3304,20 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba, switch (event_type) { case LPFC_FCOE_EVENT_TYPE_NEW_FCF: case LPFC_FCOE_EVENT_TYPE_FCF_PARAM_MOD: - lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY, - "2546 New FCF found/FCF parameter modified event: " - "evt_tag:x%x, fcf_index:x%x\n", - acqe_fcoe->event_tag, acqe_fcoe->index); - + if (event_type == LPFC_FCOE_EVENT_TYPE_NEW_FCF) + lpfc_printf_log(phba, KERN_ERR, LOG_FIP | + LOG_DISCOVERY, + "2546 New FCF found event: " + "evt_tag:x%x, fcf_index:x%x\n", + acqe_fcoe->event_tag, + acqe_fcoe->index); + else + lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | + LOG_DISCOVERY, + "2788 FCF parameter modified event: " + "evt_tag:x%x, fcf_index:x%x\n", + acqe_fcoe->event_tag, + acqe_fcoe->index); spin_lock_irq(&phba->hbalock); if ((phba->fcf.fcf_flag & FCF_SCAN_DONE) || (phba->hba_flag & FCF_DISC_INPROGRESS)) { diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 049fb9a17b3f..2eff81d366f9 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -12040,9 +12040,11 @@ lpfc_sli4_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index) phba->hba_flag |= FCF_DISC_INPROGRESS; spin_unlock_irq(&phba->hbalock); /* Reset FCF round robin index bmask for new scan */ - if (fcf_index == LPFC_FCOE_FCF_GET_FIRST) + if (fcf_index == LPFC_FCOE_FCF_GET_FIRST) { memset(phba->fcf.fcf_rr_bmask, 0, sizeof(*phba->fcf.fcf_rr_bmask)); + phba->fcf.eligible_fcf_cnt = 0; + } error = 0; } fail_fcf_scan: diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 4a35e7b9bc5b..5b6cb9742c58 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -162,6 +162,7 @@ struct lpfc_fcf { #define FCF_REDISC_FOV 0x200 /* Post FCF rediscovery fast failover */ uint32_t addr_mode; uint16_t fcf_rr_init_indx; + uint32_t eligible_fcf_cnt; struct lpfc_fcf_rec current_rec; struct lpfc_fcf_rec failover_rec; struct timer_list redisc_wait; -- cgit v1.2.2 From cb5172eafd9ffdab6bb7b1eec628ea706d5817c8 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 15 Mar 2010 11:25:07 -0400 Subject: [SCSI] lpfc 8.3.11: SLI4 Improvements - Correct all SLI4 code to work on big endian systems. - Move read of sli4 params earlier so returned values are used correctly. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++- drivers/scsi/lpfc/lpfc_hw4.h | 7 ++++ drivers/scsi/lpfc/lpfc_init.c | 76 ++++++++++++++++++++-------------------- drivers/scsi/lpfc/lpfc_sli.c | 37 ++++++++++--------- 4 files changed, 69 insertions(+), 55 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 362730b6dd85..7c4f389a2f67 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1622,7 +1622,9 @@ lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, new_fcf_record = (struct fcf_record *)(virt_addr + sizeof(struct lpfc_mbx_read_fcf_tbl)); lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record, - sizeof(struct fcf_record)); + offsetof(struct fcf_record, vlan_bitmap)); + new_fcf_record->word137 = le32_to_cpu(new_fcf_record->word137); + new_fcf_record->word138 = le32_to_cpu(new_fcf_record->word138); return new_fcf_record; } diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 820015fbc4d6..bff98add80cd 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -41,8 +41,14 @@ * Or clear that bit field: * bf_set(example_bit_field, &t1, 0); */ +#define bf_get_le32(name, ptr) \ + ((le32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK) #define bf_get(name, ptr) \ (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK) +#define bf_set_le32(name, ptr, value) \ + ((ptr)->name##_WORD = cpu_to_le32(((((value) & \ + name##_MASK) << name##_SHIFT) | (le32_to_cpu((ptr)->name##_WORD) & \ + ~(name##_MASK << name##_SHIFT))))) #define bf_set(name, ptr, value) \ ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \ ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT)))) @@ -1940,6 +1946,7 @@ struct lpfc_mbx_sli4_params { #define rdma_MASK 0x00000001 #define rdma_WORD word3 uint32_t sge_supp_len; +#define SLI4_PAGE_SIZE 4096 uint32_t word5; #define if_page_sz_SHIFT 0 #define if_page_sz_MASK 0x0000ffff diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 25ee8cc6ab7a..f8e88bb423cb 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -2566,7 +2566,7 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) shost->max_cmd_len = 16; if (phba->sli_rev == LPFC_SLI_REV4) { shost->dma_boundary = - phba->sli4_hba.pc_sli4_params.sge_supp_len; + phba->sli4_hba.pc_sli4_params.sge_supp_len-1; shost->sg_tablesize = phba->cfg_sg_seg_cnt; } @@ -4039,6 +4039,43 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) if (unlikely(rc)) goto out_free_bsmbx; + mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, + GFP_KERNEL); + if (!mboxq) { + rc = -ENOMEM; + goto out_free_bsmbx; + } + + /* Get the Supported Pages. It is always available. */ + lpfc_supported_pages(mboxq); + rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); + if (unlikely(rc)) { + rc = -EIO; + mempool_free(mboxq, phba->mbox_mem_pool); + goto out_free_bsmbx; + } + + mqe = &mboxq->u.mqe; + memcpy(&pn_page[0], ((uint8_t *)&mqe->un.supp_pages.word3), + LPFC_MAX_SUPPORTED_PAGES); + for (i = 0; i < LPFC_MAX_SUPPORTED_PAGES; i++) { + switch (pn_page[i]) { + case LPFC_SLI4_PARAMETERS: + phba->sli4_hba.pc_sli4_params.supported = 1; + break; + default: + break; + } + } + + /* Read the port's SLI4 Parameters capabilities if supported. */ + if (phba->sli4_hba.pc_sli4_params.supported) + rc = lpfc_pc_sli4_params_get(phba, mboxq); + mempool_free(mboxq, phba->mbox_mem_pool); + if (rc) { + rc = -EIO; + goto out_free_bsmbx; + } /* Create all the SLI4 queues */ rc = lpfc_sli4_queue_create(phba); if (rc) @@ -4099,43 +4136,6 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) goto out_free_fcp_eq_hdl; } - mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, - GFP_KERNEL); - if (!mboxq) { - rc = -ENOMEM; - goto out_free_fcp_eq_hdl; - } - - /* Get the Supported Pages. It is always available. */ - lpfc_supported_pages(mboxq); - rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); - if (unlikely(rc)) { - rc = -EIO; - mempool_free(mboxq, phba->mbox_mem_pool); - goto out_free_fcp_eq_hdl; - } - - mqe = &mboxq->u.mqe; - memcpy(&pn_page[0], ((uint8_t *)&mqe->un.supp_pages.word3), - LPFC_MAX_SUPPORTED_PAGES); - for (i = 0; i < LPFC_MAX_SUPPORTED_PAGES; i++) { - switch (pn_page[i]) { - case LPFC_SLI4_PARAMETERS: - phba->sli4_hba.pc_sli4_params.supported = 1; - break; - default: - break; - } - } - - /* Read the port's SLI4 Parameters capabilities if supported. */ - if (phba->sli4_hba.pc_sli4_params.supported) - rc = lpfc_pc_sli4_params_get(phba, mboxq); - mempool_free(mboxq, phba->mbox_mem_pool); - if (rc) { - rc = -EIO; - goto out_free_fcp_eq_hdl; - } return rc; out_free_fcp_eq_hdl: diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 2eff81d366f9..dd879a7d04a3 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -212,7 +212,7 @@ lpfc_sli4_eq_get(struct lpfc_queue *q) struct lpfc_eqe *eqe = q->qe[q->hba_index].eqe; /* If the next EQE is not valid then we are done */ - if (!bf_get(lpfc_eqe_valid, eqe)) + if (!bf_get_le32(lpfc_eqe_valid, eqe)) return NULL; /* If the host has not yet processed the next entry then we are done */ if (((q->hba_index + 1) % q->entry_count) == q->host_index) @@ -247,7 +247,7 @@ lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm) /* while there are valid entries */ while (q->hba_index != q->host_index) { temp_eqe = q->qe[q->host_index].eqe; - bf_set(lpfc_eqe_valid, temp_eqe, 0); + bf_set_le32(lpfc_eqe_valid, temp_eqe, 0); released++; q->host_index = ((q->host_index + 1) % q->entry_count); } @@ -285,7 +285,7 @@ lpfc_sli4_cq_get(struct lpfc_queue *q) struct lpfc_cqe *cqe; /* If the next CQE is not valid then we are done */ - if (!bf_get(lpfc_cqe_valid, q->qe[q->hba_index].cqe)) + if (!bf_get_le32(lpfc_cqe_valid, q->qe[q->hba_index].cqe)) return NULL; /* If the host has not yet processed the next entry then we are done */ if (((q->hba_index + 1) % q->entry_count) == q->host_index) @@ -321,7 +321,7 @@ lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm) /* while there are valid entries */ while (q->hba_index != q->host_index) { temp_qe = q->qe[q->host_index].cqe; - bf_set(lpfc_cqe_valid, temp_qe, 0); + bf_set_le32(lpfc_cqe_valid, temp_qe, 0); released++; q->host_index = ((q->host_index + 1) % q->entry_count); } @@ -8983,17 +8983,17 @@ lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe) int ecount = 0; uint16_t cqid; - if (bf_get(lpfc_eqe_major_code, eqe) != 0) { + if (bf_get_le32(lpfc_eqe_major_code, eqe) != 0) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0359 Not a valid slow-path completion " "event: majorcode=x%x, minorcode=x%x\n", - bf_get(lpfc_eqe_major_code, eqe), - bf_get(lpfc_eqe_minor_code, eqe)); + bf_get_le32(lpfc_eqe_major_code, eqe), + bf_get_le32(lpfc_eqe_minor_code, eqe)); return; } /* Get the reference to the corresponding CQ */ - cqid = bf_get(lpfc_eqe_resource_id, eqe); + cqid = bf_get_le32(lpfc_eqe_resource_id, eqe); /* Search for completion queue pointer matching this cqid */ speq = phba->sli4_hba.sp_eq; @@ -9221,12 +9221,12 @@ lpfc_sli4_fp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe, uint16_t cqid; int ecount = 0; - if (unlikely(bf_get(lpfc_eqe_major_code, eqe) != 0)) { + if (unlikely(bf_get_le32(lpfc_eqe_major_code, eqe) != 0)) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0366 Not a valid fast-path completion " "event: majorcode=x%x, minorcode=x%x\n", - bf_get(lpfc_eqe_major_code, eqe), - bf_get(lpfc_eqe_minor_code, eqe)); + bf_get_le32(lpfc_eqe_major_code, eqe), + bf_get_le32(lpfc_eqe_minor_code, eqe)); return; } @@ -9239,7 +9239,7 @@ lpfc_sli4_fp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe, } /* Get the reference to the corresponding CQ */ - cqid = bf_get(lpfc_eqe_resource_id, eqe); + cqid = bf_get_le32(lpfc_eqe_resource_id, eqe); if (unlikely(cqid != cq->queue_id)) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "0368 Miss-matched fast-path completion " @@ -9532,13 +9532,18 @@ lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t entry_size, struct lpfc_dmabuf *dmabuf; int x, total_qe_count; void *dma_pointer; + uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz; + if (!phba->sli4_hba.pc_sli4_params.supported) + hw_page_size = SLI4_PAGE_SIZE; + queue = kzalloc(sizeof(struct lpfc_queue) + (sizeof(union sli4_qe) * entry_count), GFP_KERNEL); if (!queue) return NULL; - queue->page_count = (PAGE_ALIGN(entry_size * entry_count))/PAGE_SIZE; + queue->page_count = (ALIGN(entry_size * entry_count, + hw_page_size))/hw_page_size; INIT_LIST_HEAD(&queue->list); INIT_LIST_HEAD(&queue->page_list); INIT_LIST_HEAD(&queue->child_list); @@ -9547,19 +9552,19 @@ lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t entry_size, if (!dmabuf) goto out_fail; dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, - PAGE_SIZE, &dmabuf->phys, + hw_page_size, &dmabuf->phys, GFP_KERNEL); if (!dmabuf->virt) { kfree(dmabuf); goto out_fail; } - memset(dmabuf->virt, 0, PAGE_SIZE); + memset(dmabuf->virt, 0, hw_page_size); dmabuf->buffer_tag = x; list_add_tail(&dmabuf->list, &queue->page_list); /* initialize queue's entry array */ dma_pointer = dmabuf->virt; for (; total_qe_count < entry_count && - dma_pointer < (PAGE_SIZE + dmabuf->virt); + dma_pointer < (hw_page_size + dmabuf->virt); total_qe_count++, dma_pointer += entry_size) { queue->qe[total_qe_count].address = dma_pointer; } -- cgit v1.2.2 From 7a4702774381103e936cae09ec12301090c6c212 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 15 Mar 2010 11:25:20 -0400 Subject: [SCSI] lpfc 8.3.11: Driver management improvements via BSG - Add BSG support for PCI loopback testing. - Add BSG support for extended mailbox commands. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 2 + drivers/scsi/lpfc/lpfc_bsg.c | 257 +++++++++++++++++++++++++++++++++--------- drivers/scsi/lpfc/lpfc_bsg.h | 4 +- drivers/scsi/lpfc/lpfc_hw.h | 10 +- drivers/scsi/lpfc/lpfc_init.c | 2 + drivers/scsi/lpfc/lpfc_mbox.c | 51 +++++---- drivers/scsi/lpfc/lpfc_sli.c | 50 +++++++- drivers/scsi/lpfc/lpfc_sli.h | 3 + 8 files changed, 296 insertions(+), 83 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 565e16dd74fc..23b9320539e1 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -554,6 +554,7 @@ struct lpfc_hba { struct lpfc_dmabuf slim2p; MAILBOX_t *mbox; + uint32_t *mbox_ext; uint32_t *inb_ha_copy; uint32_t *inb_counter; uint32_t inb_last_counter; @@ -622,6 +623,7 @@ struct lpfc_hba { uint32_t cfg_enable_hba_reset; uint32_t cfg_enable_hba_heartbeat; uint32_t cfg_enable_bg; + uint32_t cfg_hostmem_hgp; uint32_t cfg_log_verbose; uint32_t cfg_aer_support; uint32_t cfg_suppress_link_up; diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index d62b3e467926..92ad202a9380 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -79,6 +79,12 @@ struct lpfc_bsg_iocb { struct lpfc_bsg_mbox { LPFC_MBOXQ_t *pmboxq; MAILBOX_t *mb; + struct lpfc_dmabuf *rxbmp; /* for BIU diags */ + struct lpfc_dmabufext *dmp; /* for BIU diags */ + uint8_t *ext; /* extended mailbox data */ + uint32_t mbOffset; /* from app */ + uint32_t inExtWLen; /* from app */ + uint32_t outWxtWLen; /* from app */ /* job waiting for this mbox command to finish */ struct fc_bsg_job *set_job; @@ -2377,35 +2383,68 @@ void lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) { struct bsg_job_data *dd_data; - MAILBOX_t *pmb; - MAILBOX_t *mb; struct fc_bsg_job *job; uint32_t size; unsigned long flags; + uint8_t *to; + uint8_t *from; spin_lock_irqsave(&phba->ct_ev_lock, flags); dd_data = pmboxq->context1; + /* job already timed out? */ if (!dd_data) { spin_unlock_irqrestore(&phba->ct_ev_lock, flags); return; } - pmb = &dd_data->context_un.mbox.pmboxq->u.mb; - mb = dd_data->context_un.mbox.mb; + /* build the outgoing buffer to do an sg copy + * the format is the response mailbox followed by any extended + * mailbox data + */ + from = (uint8_t *)&pmboxq->u.mb; + to = (uint8_t *)dd_data->context_un.mbox.mb; + memcpy(to, from, sizeof(MAILBOX_t)); + /* copy the extended data if any, count is in words */ + if (dd_data->context_un.mbox.outWxtWLen) { + from = (uint8_t *)dd_data->context_un.mbox.ext; + to += sizeof(MAILBOX_t); + memcpy(to, from, + dd_data->context_un.mbox.outWxtWLen * sizeof(uint32_t)); + } + + from = (uint8_t *)dd_data->context_un.mbox.mb; job = dd_data->context_un.mbox.set_job; - memcpy(mb, pmb, sizeof(*pmb)); - size = job->request_payload.payload_len; + size = job->reply_payload.payload_len; job->reply->reply_payload_rcv_len = sg_copy_from_buffer(job->reply_payload.sg_list, job->reply_payload.sg_cnt, - mb, size); + from, size); job->reply->result = 0; + dd_data->context_un.mbox.set_job = NULL; job->dd_data = NULL; job->job_done(job); + /* need to hold the lock until we call job done to hold off + * the timeout handler returning to the midlayer while + * we are stillprocessing the job + */ spin_unlock_irqrestore(&phba->ct_ev_lock, flags); + + kfree(dd_data->context_un.mbox.mb); mempool_free(dd_data->context_un.mbox.pmboxq, phba->mbox_mem_pool); - kfree(mb); + kfree(dd_data->context_un.mbox.ext); + if (dd_data->context_un.mbox.dmp) { + dma_free_coherent(&phba->pcidev->dev, + dd_data->context_un.mbox.dmp->size, + dd_data->context_un.mbox.dmp->dma.virt, + dd_data->context_un.mbox.dmp->dma.phys); + kfree(dd_data->context_un.mbox.dmp); + } + if (dd_data->context_un.mbox.rxbmp) { + lpfc_mbuf_free(phba, dd_data->context_un.mbox.rxbmp->virt, + dd_data->context_un.mbox.rxbmp->phys); + kfree(dd_data->context_un.mbox.rxbmp); + } kfree(dd_data); return; } @@ -2468,6 +2507,7 @@ static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba, case MBX_WRITE_EVENT_LOG: case MBX_PORT_CAPABILITIES: case MBX_PORT_IOV_CONTROL: + case MBX_RUN_BIU_DIAG64: break; case MBX_SET_VARIABLE: lpfc_printf_log(phba, KERN_INFO, LOG_INIT, @@ -2482,7 +2522,6 @@ static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba, phba->fc_topology = TOPOLOGY_PT_PT; } break; - case MBX_RUN_BIU_DIAG64: case MBX_READ_EVENT_LOG: case MBX_READ_SPARM64: case MBX_READ_LA: @@ -2518,97 +2557,199 @@ static uint32_t lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, struct lpfc_vport *vport) { - LPFC_MBOXQ_t *pmboxq; - MAILBOX_t *pmb; - MAILBOX_t *mb; - struct bsg_job_data *dd_data; + LPFC_MBOXQ_t *pmboxq = NULL; /* internal mailbox queue */ + MAILBOX_t *pmb; /* shortcut to the pmboxq mailbox */ + /* a 4k buffer to hold the mb and extended data from/to the bsg */ + MAILBOX_t *mb = NULL; + struct bsg_job_data *dd_data = NULL; /* bsg data tracking structure */ uint32_t size; + struct lpfc_dmabuf *rxbmp = NULL; /* for biu diag */ + struct lpfc_dmabufext *dmp = NULL; /* for biu diag */ + struct ulp_bde64 *rxbpl = NULL; + struct dfc_mbox_req *mbox_req = (struct dfc_mbox_req *) + job->request->rqst_data.h_vendor.vendor_cmd; + uint8_t *ext = NULL; int rc = 0; + uint8_t *from; + + /* in case no data is transferred */ + job->reply->reply_payload_rcv_len = 0; + + /* check if requested extended data lengths are valid */ + if ((mbox_req->inExtWLen > MAILBOX_EXT_SIZE) || + (mbox_req->outWxtWLen > MAILBOX_EXT_SIZE)) { + rc = -ERANGE; + goto job_done; + } /* allocate our bsg tracking structure */ dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); if (!dd_data) { lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, "2727 Failed allocation of dd_data\n"); - return -ENOMEM; + rc = -ENOMEM; + goto job_done; } mb = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!mb) { - kfree(dd_data); - return -ENOMEM; + rc = -ENOMEM; + goto job_done; } pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmboxq) { - kfree(dd_data); - kfree(mb); - return -ENOMEM; + rc = -ENOMEM; + goto job_done; } + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); size = job->request_payload.payload_len; - job->reply->reply_payload_rcv_len = - sg_copy_to_buffer(job->request_payload.sg_list, - job->request_payload.sg_cnt, - mb, size); + sg_copy_to_buffer(job->request_payload.sg_list, + job->request_payload.sg_cnt, + mb, size); rc = lpfc_bsg_check_cmd_access(phba, mb, vport); - if (rc != 0) { - kfree(dd_data); - kfree(mb); - mempool_free(pmboxq, phba->mbox_mem_pool); - return rc; /* must be negative */ - } + if (rc != 0) + goto job_done; /* must be negative */ - memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); pmb = &pmboxq->u.mb; memcpy(pmb, mb, sizeof(*pmb)); pmb->mbxOwner = OWN_HOST; - pmboxq->context1 = NULL; pmboxq->vport = vport; + /* extended mailbox commands will need an extended buffer */ + if (mbox_req->inExtWLen || mbox_req->outWxtWLen) { + ext = kzalloc(MAILBOX_EXT_SIZE, GFP_KERNEL); + if (!ext) { + rc = -ENOMEM; + goto job_done; + } + + /* any data for the device? */ + if (mbox_req->inExtWLen) { + from = (uint8_t *)mb; + from += sizeof(MAILBOX_t); + memcpy((uint8_t *)ext, from, + mbox_req->inExtWLen * sizeof(uint32_t)); + } + + pmboxq->context2 = ext; + pmboxq->in_ext_byte_len = + mbox_req->inExtWLen * + sizeof(uint32_t); + pmboxq->out_ext_byte_len = + mbox_req->outWxtWLen * + sizeof(uint32_t); + pmboxq->mbox_offset_word = + mbox_req->mbOffset; + pmboxq->context2 = ext; + pmboxq->in_ext_byte_len = + mbox_req->inExtWLen * sizeof(uint32_t); + pmboxq->out_ext_byte_len = + mbox_req->outWxtWLen * sizeof(uint32_t); + pmboxq->mbox_offset_word = mbox_req->mbOffset; + } + + /* biu diag will need a kernel buffer to transfer the data + * allocate our own buffer and setup the mailbox command to + * use ours + */ + if (pmb->mbxCommand == MBX_RUN_BIU_DIAG64) { + rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); + if (!rxbmp) { + rc = -ENOMEM; + goto job_done; + } + + rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); + INIT_LIST_HEAD(&rxbmp->list); + rxbpl = (struct ulp_bde64 *) rxbmp->virt; + dmp = diag_cmd_data_alloc(phba, rxbpl, PAGE_SIZE, 0); + if (!dmp) { + rc = -ENOMEM; + goto job_done; + } + + dmp->size = PAGE_SIZE; + INIT_LIST_HEAD(&dmp->dma.list); + pmb->un.varBIUdiag.un.s2.xmit_bde64.addrHigh = + putPaddrHigh(dmp->dma.phys); + pmb->un.varBIUdiag.un.s2.xmit_bde64.addrLow = + putPaddrLow(dmp->dma.phys); + + pmb->un.varBIUdiag.un.s2.rcv_bde64.addrHigh = + putPaddrHigh(dmp->dma.phys + + pmb->un.varBIUdiag.un.s2. + xmit_bde64.tus.f.bdeSize); + pmb->un.varBIUdiag.un.s2.rcv_bde64.addrLow = + putPaddrLow(dmp->dma.phys + + pmb->un.varBIUdiag.un.s2. + xmit_bde64.tus.f.bdeSize); + dd_data->context_un.mbox.rxbmp = rxbmp; + dd_data->context_un.mbox.dmp = dmp; + } else { + dd_data->context_un.mbox.rxbmp = NULL; + dd_data->context_un.mbox.dmp = NULL; + } + + /* setup wake call as IOCB callback */ + pmboxq->mbox_cmpl = lpfc_bsg_wake_mbox_wait; + + /* setup context field to pass wait_queue pointer to wake function */ + pmboxq->context1 = dd_data; + dd_data->type = TYPE_MBOX; + dd_data->context_un.mbox.pmboxq = pmboxq; + dd_data->context_un.mbox.mb = mb; + dd_data->context_un.mbox.set_job = job; + dd_data->context_un.mbox.ext = ext; + dd_data->context_un.mbox.mbOffset = mbox_req->mbOffset; + dd_data->context_un.mbox.inExtWLen = mbox_req->inExtWLen; + dd_data->context_un.mbox.outWxtWLen = mbox_req->outWxtWLen; + job->dd_data = dd_data; + if ((vport->fc_flag & FC_OFFLINE_MODE) || (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))) { rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); if (rc != MBX_SUCCESS) { - if (rc != MBX_TIMEOUT) { - kfree(dd_data); - kfree(mb); - mempool_free(pmboxq, phba->mbox_mem_pool); - } - return (rc == MBX_TIMEOUT) ? -ETIME : -ENODEV; + rc = (rc == MBX_TIMEOUT) ? -ETIME : -ENODEV; + goto job_done; } + /* job finished, copy the data */ memcpy(mb, pmb, sizeof(*pmb)); job->reply->reply_payload_rcv_len = sg_copy_from_buffer(job->reply_payload.sg_list, job->reply_payload.sg_cnt, mb, size); - kfree(dd_data); - kfree(mb); - mempool_free(pmboxq, phba->mbox_mem_pool); /* not waiting mbox already done */ - return 0; + rc = 0; + goto job_done; } - /* setup wake call as IOCB callback */ - pmboxq->mbox_cmpl = lpfc_bsg_wake_mbox_wait; - /* setup context field to pass wait_queue pointer to wake function */ - pmboxq->context1 = dd_data; - dd_data->type = TYPE_MBOX; - dd_data->context_un.mbox.pmboxq = pmboxq; - dd_data->context_un.mbox.mb = mb; - dd_data->context_un.mbox.set_job = job; - job->dd_data = dd_data; rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); - if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) { - kfree(dd_data); - kfree(mb); + if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) + return 1; /* job started */ + +job_done: + /* common exit for error or job completed inline */ + kfree(mb); + if (pmboxq) mempool_free(pmboxq, phba->mbox_mem_pool); - return -EIO; + kfree(ext); + if (dmp) { + dma_free_coherent(&phba->pcidev->dev, + dmp->size, dmp->dma.virt, + dmp->dma.phys); + kfree(dmp); + } + if (rxbmp) { + lpfc_mbuf_free(phba, rxbmp->virt, rxbmp->phys); + kfree(rxbmp); } + kfree(dd_data); - return 1; + return rc; } /** @@ -2638,6 +2779,11 @@ lpfc_bsg_mbox_cmd(struct fc_bsg_job *job) goto job_error; } + if (job->reply_payload.payload_len != PAGE_SIZE) { + rc = -EINVAL; + goto job_error; + } + if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) { rc = -EAGAIN; goto job_error; @@ -3094,6 +3240,7 @@ lpfc_bsg_timeout(struct fc_bsg_job *job) job->dd_data = NULL; job->reply->reply_payload_rcv_len = 0; job->reply->result = -EAGAIN; + /* the mbox completion handler can now be run */ spin_unlock_irqrestore(&phba->ct_ev_lock, flags); job->job_done(job); break; diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h index 5bc630819b9e..e89ed22bbb01 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.h +++ b/drivers/scsi/lpfc/lpfc_bsg.h @@ -93,9 +93,9 @@ struct get_mgmt_rev_reply { struct dfc_mbox_req { uint32_t command; + uint32_t mbOffset; uint32_t inExtWLen; - uint32_t outExtWLen; - uint8_t mbOffset; + uint32_t outWxtWLen; }; /* Used for menlo command or menlo data. The xri is only used for menlo data */ diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 89ff7c09e298..6c71ea416634 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -2934,6 +2934,12 @@ typedef struct { /* Union of all Mailbox Command types */ #define MAILBOX_CMD_WSIZE 32 #define MAILBOX_CMD_SIZE (MAILBOX_CMD_WSIZE * sizeof(uint32_t)) +/* ext_wsize times 4 bytes should not be greater than max xmit size */ +#define MAILBOX_EXT_WSIZE 512 +#define MAILBOX_EXT_SIZE (MAILBOX_EXT_WSIZE * sizeof(uint32_t)) +#define MAILBOX_HBA_EXT_OFFSET 0x100 +/* max mbox xmit size is a page size for sysfs IO operations */ +#define MAILBOX_MAX_XMIT_SIZE PAGE_SIZE typedef union { uint32_t varWords[MAILBOX_CMD_WSIZE - 1]; /* first word is type/ @@ -3652,7 +3658,8 @@ typedef struct _IOCB { /* IOCB structure */ /* Maximum IOCBs that will fit in SLI2 slim */ #define MAX_SLI2_IOCB 498 #define MAX_SLIM_IOCB_SIZE (SLI2_SLIM_SIZE - \ - (sizeof(MAILBOX_t) + sizeof(PCB_t))) + (sizeof(MAILBOX_t) + sizeof(PCB_t) + \ + sizeof(uint32_t) * MAILBOX_EXT_WSIZE)) /* HBQ entries are 4 words each = 4k */ #define LPFC_TOTAL_HBQ_SIZE (sizeof(struct lpfc_hbq_entry) * \ @@ -3660,6 +3667,7 @@ typedef struct _IOCB { /* IOCB structure */ struct lpfc_sli2_slim { MAILBOX_t mbx; + uint32_t mbx_ext_words[MAILBOX_EXT_WSIZE]; PCB_t pcb; IOCB_t IOCBs[MAX_SLIM_IOCB_SIZE]; }; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index f8e88bb423cb..feba3be90cb2 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -5059,6 +5059,8 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *phba) memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE); phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx); + phba->mbox_ext = (phba->slim2p.virt + + offsetof(struct lpfc_sli2_slim, mbx_ext_words)); phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb)); phba->IOCBs = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, IOCBs)); diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 72e6adb0643e..a6b7f5a0210b 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -1216,7 +1216,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) phba->pcb->feature = FEATURE_INITIAL_SLI2; /* Setup Mailbox pointers */ - phba->pcb->mailBoxSize = sizeof(MAILBOX_t); + phba->pcb->mailBoxSize = sizeof(MAILBOX_t) + MAILBOX_EXT_SIZE; offset = (uint8_t *)phba->mbox - (uint8_t *)phba->slim2p.virt; pdma_addr = phba->slim2p.phys + offset; phba->pcb->mbAddrHigh = putPaddrHigh(pdma_addr); @@ -1272,28 +1272,41 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) * */ - if (phba->sli_rev == 3) { - phba->host_gp = &mb_slim->us.s3.host[0]; - phba->hbq_put = &mb_slim->us.s3.hbq_put[0]; - } else { - phba->host_gp = &mb_slim->us.s2.host[0]; + if (phba->cfg_hostmem_hgp && phba->sli_rev != 3) { + phba->host_gp = &phba->mbox->us.s2.host[0]; phba->hbq_put = NULL; - } + offset = (uint8_t *)&phba->mbox->us.s2.host - + (uint8_t *)phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; + phba->pcb->hgpAddrHigh = putPaddrHigh(pdma_addr); + phba->pcb->hgpAddrLow = putPaddrLow(pdma_addr); + } else { + /* Always Host Group Pointer is in SLIM */ + mb->un.varCfgPort.hps = 1; - /* mask off BAR0's flag bits 0 - 3 */ - phba->pcb->hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) + - (void __iomem *)phba->host_gp - - (void __iomem *)phba->MBslimaddr; - if (bar_low & PCI_BASE_ADDRESS_MEM_TYPE_64) - phba->pcb->hgpAddrHigh = bar_high; - else - phba->pcb->hgpAddrHigh = 0; - /* write HGP data to SLIM at the required longword offset */ - memset(&hgp, 0, sizeof(struct lpfc_hgp)); + if (phba->sli_rev == 3) { + phba->host_gp = &mb_slim->us.s3.host[0]; + phba->hbq_put = &mb_slim->us.s3.hbq_put[0]; + } else { + phba->host_gp = &mb_slim->us.s2.host[0]; + phba->hbq_put = NULL; + } - for (i=0; i < phba->sli.num_rings; i++) { - lpfc_memcpy_to_slim(phba->host_gp + i, &hgp, + /* mask off BAR0's flag bits 0 - 3 */ + phba->pcb->hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) + + (void __iomem *)phba->host_gp - + (void __iomem *)phba->MBslimaddr; + if (bar_low & PCI_BASE_ADDRESS_MEM_TYPE_64) + phba->pcb->hgpAddrHigh = bar_high; + else + phba->pcb->hgpAddrHigh = 0; + /* write HGP data to SLIM at the required longword offset */ + memset(&hgp, 0, sizeof(struct lpfc_hgp)); + + for (i = 0; i < phba->sli.num_rings; i++) { + lpfc_memcpy_to_slim(phba->host_gp + i, &hgp, sizeof(*phba->host_gp)); + } } /* Setup Port Group offset */ diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index dd879a7d04a3..2f7018821531 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -4891,9 +4891,34 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, mb->mbxOwner = OWN_CHIP; if (psli->sli_flag & LPFC_SLI_ACTIVE) { - /* First copy command data to host SLIM area */ + /* Populate mbox extension offset word. */ + if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len) { + *(((uint32_t *)mb) + pmbox->mbox_offset_word) + = (uint8_t *)phba->mbox_ext + - (uint8_t *)phba->mbox; + } + + /* Copy the mailbox extension data */ + if (pmbox->in_ext_byte_len && pmbox->context2) { + lpfc_sli_pcimem_bcopy(pmbox->context2, + (uint8_t *)phba->mbox_ext, + pmbox->in_ext_byte_len); + } + /* Copy command data to host SLIM area */ lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE); } else { + /* Populate mbox extension offset word. */ + if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len) + *(((uint32_t *)mb) + pmbox->mbox_offset_word) + = MAILBOX_HBA_EXT_OFFSET; + + /* Copy the mailbox extension data */ + if (pmbox->in_ext_byte_len && pmbox->context2) { + lpfc_memcpy_to_slim(phba->MBslimaddr + + MAILBOX_HBA_EXT_OFFSET, + pmbox->context2, pmbox->in_ext_byte_len); + + } if (mb->mbxCommand == MBX_CONFIG_PORT) { /* copy command data into host mbox for cmpl */ lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE); @@ -5003,15 +5028,22 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, if (psli->sli_flag & LPFC_SLI_ACTIVE) { /* copy results back to user */ lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE); + /* Copy the mailbox extension data */ + if (pmbox->out_ext_byte_len && pmbox->context2) { + lpfc_sli_pcimem_bcopy(phba->mbox_ext, + pmbox->context2, + pmbox->out_ext_byte_len); + } } else { /* First copy command data */ lpfc_memcpy_from_slim(mb, phba->MBslimaddr, MAILBOX_CMD_SIZE); - if ((mb->mbxCommand == MBX_DUMP_MEMORY) && - pmbox->context2) { - lpfc_memcpy_from_slim((void *)pmbox->context2, - phba->MBslimaddr + DMP_RSP_OFFSET, - mb->un.varDmp.word_cnt); + /* Copy the mailbox extension data */ + if (pmbox->out_ext_byte_len && pmbox->context2) { + lpfc_memcpy_from_slim(pmbox->context2, + phba->MBslimaddr + + MAILBOX_HBA_EXT_OFFSET, + pmbox->out_ext_byte_len); } } @@ -8133,6 +8165,12 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id) if (pmb->mbox_cmpl) { lpfc_sli_pcimem_bcopy(mbox, pmbox, MAILBOX_CMD_SIZE); + if (pmb->out_ext_byte_len && + pmb->context2) + lpfc_sli_pcimem_bcopy( + phba->mbox_ext, + pmb->context2, + pmb->out_ext_byte_len); } if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) { pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG; diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index b4a639c47616..54a5e0bc827f 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -110,6 +110,9 @@ typedef struct lpfcMboxq { void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *); uint8_t mbox_flag; + uint16_t in_ext_byte_len; + uint16_t out_ext_byte_len; + uint8_t mbox_offset_word; struct lpfc_mcqe mcqe; struct lpfc_mbx_nembed_sge_virt *sge_array; } LPFC_MBOXQ_t; -- cgit v1.2.2 From e2af0d2ed86a2415b0562526601cf2d5cae5a96d Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 15 Mar 2010 11:25:32 -0400 Subject: [SCSI] lpfc 8.3.11: Fix AER uncorrectable non-fatal error handling Only abort outstanding I/O to force the OS to retry failed I/Os for AER uncorrectable non-fatal errors instead of reseting the adapter. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_init.c | 50 +++++++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 23 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index feba3be90cb2..56421c714bf8 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -7764,21 +7764,23 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev) * @phba: pointer to lpfc hba data structure. * * This routine is called to prepare the SLI3 device for PCI slot recover. It - * aborts and stops all the on-going I/Os on the pci device. + * aborts all the outstanding SCSI I/Os to the pci device. **/ static void lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba) { + struct lpfc_sli *psli = &phba->sli; + struct lpfc_sli_ring *pring; + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2723 PCI channel I/O abort preparing for recovery\n"); - /* Prepare for bringing HBA offline */ - lpfc_offline_prep(phba); - /* Clear sli active flag to prevent sysfs access to HBA */ - spin_lock_irq(&phba->hbalock); - phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE; - spin_unlock_irq(&phba->hbalock); - /* Stop and flush all I/Os and bring HBA offline */ - lpfc_offline(phba); + + /* + * There may be errored I/Os through HBA, abort all I/Os on txcmplq + * and let the SCSI mid-layer to retry them to recover. + */ + pring = &psli->ring[psli->fcp_ring]; + lpfc_sli_abort_iocb_ring(phba, pring); } /** @@ -7792,21 +7794,20 @@ lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba) static void lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba) { - struct lpfc_sli *psli = &phba->sli; - struct lpfc_sli_ring *pring; - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2710 PCI channel disable preparing for reset\n"); + + /* Block all SCSI devices' I/Os on the host */ + lpfc_scsi_dev_block(phba); + + /* stop all timers */ + lpfc_stop_hba_timers(phba); + /* Disable interrupt and pci device */ lpfc_sli_disable_intr(phba); pci_disable_device(phba->pcidev); - /* - * There may be I/Os dropped by the firmware. - * Error iocb (I/O) on txcmplq and let the SCSI layer - * retry it after re-establishing link. - */ - pring = &psli->ring[psli->fcp_ring]; - lpfc_sli_abort_iocb_ring(phba, pring); + /* Flush all driver's outstanding SCSI I/Os as we are to reset */ + lpfc_sli_flush_fcp_rings(phba); } /** @@ -7822,6 +7823,12 @@ lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2711 PCI channel permanent disable for failure\n"); + /* Block all SCSI devices' I/Os on the host */ + lpfc_scsi_dev_block(phba); + + /* stop all timers */ + lpfc_stop_hba_timers(phba); + /* Clean up all driver's outstanding SCSI I/Os */ lpfc_sli_flush_fcp_rings(phba); } @@ -7850,9 +7857,6 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state) struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; - /* Block all SCSI devices' I/Os on the host */ - lpfc_scsi_dev_block(phba); - switch (state) { case pci_channel_io_normal: /* Non-fatal error, prepare for recovery */ @@ -7959,7 +7963,7 @@ lpfc_io_resume_s3(struct pci_dev *pdev) struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; - /* Bring the device online */ + /* Bring device online, it will be no-op for non-fatal error resume */ lpfc_online(phba); /* Clean up Advanced Error Reporting (AER) if needed */ -- cgit v1.2.2 From 4b40c59eced94eea7f4583ffb0dbc33a5fa92499 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 15 Mar 2010 11:25:44 -0400 Subject: [SCSI] lpfc 8.3.11: NPIV changes - Enable NPIV by default. - Added code to handle unsolicited LOGO on physical port. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 2 ++ drivers/scsi/lpfc/lpfc_attr.c | 2 +- drivers/scsi/lpfc/lpfc_els.c | 7 ++++++- drivers/scsi/lpfc/lpfc_hbadisc.c | 7 ++++++- drivers/scsi/lpfc/lpfc_nportdisc.c | 43 +++++++++++++++++++++++++++++++++----- 5 files changed, 53 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 23b9320539e1..e35a4c71eb9a 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -310,7 +310,9 @@ struct lpfc_vport { #define FC_NLP_MORE 0x40 /* More node to process in node tbl */ #define FC_OFFLINE_MODE 0x80 /* Interface is offline for diag */ #define FC_FABRIC 0x100 /* We are fabric attached */ +#define FC_VPORT_LOGO_RCVD 0x200 /* LOGO received on vport */ #define FC_RSCN_DISCOVERY 0x400 /* Auth all devices after RSCN */ +#define FC_LOGO_RCVD_DID_CHNG 0x800 /* FDISC on phys port detect DID chng*/ #define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */ #define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */ #define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 1849e33e68f9..5df15c65b35b 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1929,7 +1929,7 @@ int lpfc_enable_npiv = 0; module_param(lpfc_enable_npiv, int, 0); MODULE_PARM_DESC(lpfc_enable_npiv, "Enable NPIV functionality"); lpfc_param_show(enable_npiv); -lpfc_param_init(enable_npiv, 0, 0, 1); +lpfc_param_init(enable_npiv, 1, 0, 1); static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, lpfc_enable_npiv_show, NULL); diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 0a337dab211c..9508661fe825 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -864,6 +864,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } spin_lock_irq(shost->host_lock); vport->fc_flag &= ~FC_VPORT_CVL_RCVD; + vport->fc_flag &= ~FC_VPORT_LOGO_RCVD; spin_unlock_irq(shost->host_lock); /* @@ -6053,7 +6054,8 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) spin_lock_irq(shost->host_lock); vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; spin_unlock_irq(shost->host_lock); - if (vport->port_type == LPFC_PHYSICAL_PORT) + if (vport->port_type == LPFC_PHYSICAL_PORT + && !(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG)) lpfc_initial_flogi(vport); else lpfc_initial_fdisc(vport); @@ -6289,6 +6291,7 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } spin_lock_irq(shost->host_lock); vport->fc_flag &= ~FC_VPORT_CVL_RCVD; + vport->fc_flag &= ~FC_VPORT_LOGO_RCVD; vport->fc_flag |= FC_FABRIC; if (vport->phba->fc_topology == TOPOLOGY_LOOP) vport->fc_flag |= FC_PUBLIC_LOOP; @@ -6318,6 +6321,8 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; if (phba->sli_rev == LPFC_SLI_REV4) vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; + else + vport->fc_flag |= FC_LOGO_RCVD_DID_CHNG; spin_unlock_irq(shost->host_lock); } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 7c4f389a2f67..d2b55f05aa02 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -3016,7 +3016,12 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); if (vport->port_state == LPFC_FABRIC_CFG_LINK) { - lpfc_start_fdiscs(phba); + /* when physical port receive logo donot start + * vport discovery */ + if (!(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG)) + lpfc_start_fdiscs(phba); + else + vport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG ; lpfc_do_scr_ns_plogi(phba, vport); } diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index e331204a4d56..e1086da69061 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -493,6 +493,9 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, struct lpfc_iocbq *cmdiocb, uint32_t els_cmd) { struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_hba *phba = vport->phba; + struct lpfc_vport **vports; + int i, active_vlink_present = 0 ; /* Put ndlp in NPR state with 1 sec timeout for plogi, ACC logo */ /* Only call LOGO ACC for first LOGO, this avoids sending unnecessary @@ -505,15 +508,44 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, lpfc_els_rsp_acc(vport, ELS_CMD_PRLO, cmdiocb, ndlp, NULL); else lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL); - if ((ndlp->nlp_DID == Fabric_DID) && - vport->port_type == LPFC_NPIV_PORT) { + if (ndlp->nlp_DID == Fabric_DID) { + if (vport->port_state <= LPFC_FDISC) + goto out; lpfc_linkdown_port(vport); - mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1); spin_lock_irq(shost->host_lock); - ndlp->nlp_flag |= NLP_DELAY_TMO; + vport->fc_flag |= FC_VPORT_LOGO_RCVD; spin_unlock_irq(shost->host_lock); + vports = lpfc_create_vport_work_array(phba); + if (vports) { + for (i = 0; i <= phba->max_vports && vports[i] != NULL; + i++) { + if ((!(vports[i]->fc_flag & + FC_VPORT_LOGO_RCVD)) && + (vports[i]->port_state > LPFC_FDISC)) { + active_vlink_present = 1; + break; + } + } + lpfc_destroy_vport_work_array(phba, vports); + } - ndlp->nlp_last_elscmd = ELS_CMD_FDISC; + if (active_vlink_present) { + /* + * If there are other active VLinks present, + * re-instantiate the Vlink using FDISC. + */ + mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ); + spin_lock_irq(shost->host_lock); + ndlp->nlp_flag |= NLP_DELAY_TMO; + spin_unlock_irq(shost->host_lock); + ndlp->nlp_last_elscmd = ELS_CMD_FDISC; + vport->port_state = LPFC_FDISC; + } else { + spin_lock_irq(shost->host_lock); + phba->pport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG; + spin_unlock_irq(shost->host_lock); + lpfc_retry_pport_discovery(phba); + } } else if ((!(ndlp->nlp_type & NLP_FABRIC) && ((ndlp->nlp_type & NLP_FCP_TARGET) || !(ndlp->nlp_type & NLP_FCP_INITIATOR))) || @@ -526,6 +558,7 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_last_elscmd = ELS_CMD_PLOGI; } +out: ndlp->nlp_prev_state = ndlp->nlp_state; lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); -- cgit v1.2.2 From b620debb06da7dff773460674695d524161d90af Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 15 Mar 2010 11:25:58 -0400 Subject: [SCSI] lpfc 8.3.11: Update Driver version to 8.3.11 Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 013deec5dae8..a3a11d37de79 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.10" +#define LPFC_DRIVER_VERSION "8.3.11" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" #define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp" -- cgit v1.2.2 From 31cef6bcb89dbbc325e65f7570644554de7db441 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 15:20:37 +0530 Subject: [SCSI] mpt2sas : Do not reset handle before calling _scsih_remove_device in RESCAN task after HBA RESET Setting handle to zero is not required before _scsih_remove_device. Driver uses sas_device->handle reference in _scsih_remove_device. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 6d9f99720b48..fa94f0ff7762 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -5636,8 +5636,6 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc) (unsigned long long) sas_device->enclosure_logical_id, sas_device->slot); - /* invalidate the device handle */ - sas_device->handle = 0; _scsih_remove_device(ioc, sas_device); } -- cgit v1.2.2 From 7921b35c5fcf300ebd860e3e7894c692c9547838 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 16:21:33 +0530 Subject: [SCSI] mpt2sas: Corrected time stamp incorrect timestamp on 32 bit platforms: The upper 32 bit of the timestamp was getting truncated when converting seconds to milliseconds, which was due to the variable being long. To fix the problem, the variable needs to be u64. Also the microseconds conversion to milliseconds was incorrect; it should be divide by 1000 instead of divide by 8. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index fb886d099baf..2e6e45a2803f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -3009,8 +3009,8 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) * since epoch ~ midnight January 1, 1970. */ do_gettimeofday(¤t_time); - mpi_request.TimeStamp = (current_time.tv_sec * 1000) + - (current_time.tv_usec >> 3); + mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 + + (current_time.tv_usec / 1000)); if (ioc->logging_level & MPT_DEBUG_INIT) { u32 *mfp; -- cgit v1.2.2 From f891dcfdc11d2004253861f51d627bfda6773c76 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 16:22:21 +0530 Subject: [SCSI] mpt2sas: Corrected conditional checks for Internal device Reset bug fix in the handling of the internal device reset event The reason code check in scsih_sas_device_status_change_event never evaluates as true for internal device reset, hence driver never quiesce s IO when firmware is sending a device reset. The fix is to change the evaluate to: if (event_data->ReasonCode != MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && event_data->ReasonCode != MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET) return; Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index fa94f0ff7762..f3ce9b1825b1 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -4435,10 +4435,10 @@ _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, event_data); #endif - if (!(event_data->ReasonCode == + if (event_data->ReasonCode != MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && - event_data->ReasonCode == - MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET)) + event_data->ReasonCode != + MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET) return; spin_lock_irqsave(&ioc->sas_device_lock, flags); -- cgit v1.2.2 From 89009fbb7d2df37536c8dc932fdead4189783f92 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 16:22:52 +0530 Subject: [SCSI] mpt2sas: Use of get_free_pages for huge memorary allocation. use the get_free_pages API for larger contigious physical memory chunk. Also, the ioc->chain_depth need to be changed from a 16bit to 32bit variable because the number of chains will exceed 64k when the queue depth is large. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 12 +++++++----- drivers/scsi/mpt2sas/mpt2sas_base.h | 5 +++-- 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 2e6e45a2803f..9ad4b48a9b62 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -1901,7 +1901,7 @@ _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc) ioc->config_page, ioc->config_page_dma); } - kfree(ioc->scsi_lookup); + free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages); kfree(ioc->hpr_lookup); kfree(ioc->internal_lookup); } @@ -2113,11 +2113,13 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) ioc->name, (unsigned long long) ioc->request_dma)); total_sz += sz; - ioc->scsi_lookup = kcalloc(ioc->scsiio_depth, - sizeof(struct request_tracker), GFP_KERNEL); + sz = ioc->scsiio_depth * sizeof(struct request_tracker); + ioc->scsi_lookup_pages = get_order(sz); + ioc->scsi_lookup = (struct request_tracker *)__get_free_pages( + GFP_KERNEL, ioc->scsi_lookup_pages); if (!ioc->scsi_lookup) { - printk(MPT2SAS_ERR_FMT "scsi_lookup: kcalloc failed\n", - ioc->name); + printk(MPT2SAS_ERR_FMT "scsi_lookup: get_free_pages failed, " + "sz(%d)\n", ioc->name, (int)sz); goto out; } diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 142b694c9de5..cdedfcbb8ca7 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -676,7 +676,8 @@ struct MPT2SAS_ADAPTER { dma_addr_t request_dma; u32 request_dma_sz; struct request_tracker *scsi_lookup; - spinlock_t scsi_lookup_lock; + ulong scsi_lookup_pages; + spinlock_t scsi_lookup_lock; struct list_head free_list; int pending_io_count; wait_queue_head_t reset_wq; @@ -688,7 +689,7 @@ struct MPT2SAS_ADAPTER { u16 max_sges_in_chain_message; u16 chains_needed_per_io; u16 chain_offset_value_for_main_message; - u16 chain_depth; + u32 chain_depth; /* hi-priority queue */ u16 hi_priority_smid; -- cgit v1.2.2 From 6558bbb1457d2f33e233f9ed7bcf17fe96b93878 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 16:23:36 +0530 Subject: [SCSI] mpt2sas: Early return from function if shost is in recovery. Aded checks for shost_recovery flag for early return from function. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 2 ++ drivers/scsi/mpt2sas/mpt2sas_scsih.c | 6 +++--- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 9ad4b48a9b62..b7b6285a3061 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -3521,7 +3521,9 @@ mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc) __func__)); _base_mask_interrupts(ioc); + ioc->shost_recovery = 1; _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); + ioc->shost_recovery = 0; if (ioc->pci_irq) { synchronize_irq(pdev->irq); free_irq(ioc->pci_irq, ioc); diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index f3ce9b1825b1..61199759f8d1 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -1979,7 +1979,7 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, return; } - if (ioc->shost_recovery) { + if (ioc->shost_recovery || ioc->remove_host) { printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", __func__, ioc->name); return; @@ -4246,7 +4246,7 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, _scsih_sas_topology_change_event_debug(ioc, event_data); #endif - if (ioc->shost_recovery) + if (ioc->shost_recovery || ioc->remove_host) return; if (!ioc->sas_hba.num_phys) @@ -4285,7 +4285,7 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, "expander event\n", ioc->name)); return; } - if (ioc->shost_recovery) + if (ioc->shost_recovery || ioc->remove_host) return; phy_number = event_data->StartPhyNum + i; reason_code = event_data->PHY[i].PhyStatus & -- cgit v1.2.2 From b4344276f75827f609ebef886b292653bec38f92 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 16:24:14 +0530 Subject: [SCSI] mpt2sas: Driver will not treat NEEDS_INIT as failure. Now Driver will not treat NEEDS_INIT as failure. In addition to this, the driver will now display message to describe the the access flags when bits are set, so the end user can better understand failures. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 153 +++++++++++++++++++++++++++++++---- 1 file changed, 138 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 61199759f8d1..afd3b82f7cd6 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2384,7 +2384,6 @@ _scsih_fw_event_cleanup_queue(struct MPT2SAS_ADAPTER *ioc) } } - /** * _scsih_ublock_io_device - set the device state to SDEV_RUNNING * @ioc: per adapter object @@ -3917,6 +3916,134 @@ _scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) _scsih_expander_node_remove(ioc, sas_expander); } +/** + * _scsih_check_access_status - check access flags + * @ioc: per adapter object + * @sas_address: sas address + * @handle: sas device handle + * @access_flags: errors returned during discovery of the device + * + * Return 0 for success, else failure + */ +static u8 +_scsih_check_access_status(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, + u16 handle, u8 access_status) +{ + u8 rc = 1; + char *desc = NULL; + + switch (access_status) { + case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS: + case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION: + rc = 0; + break; + case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED: + desc = "sata capability failed"; + break; + case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT: + desc = "sata affiliation conflict"; + break; + case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE: + desc = "route not addressable"; + break; + case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE: + desc = "smp error not addressable"; + break; + case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED: + desc = "device blocked"; + break; + case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE: + case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX: + desc = "sata initialization failed"; + break; + default: + desc = "unknown"; + break; + } + + if (!rc) + return 0; + + printk(MPT2SAS_ERR_FMT "discovery errors(%s): sas_address(0x%016llx), " + "handle(0x%04x)\n", ioc->name, desc, + (unsigned long long)sas_address, handle); + return rc; +} + +static void +_scsih_check_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + struct _sas_device *sas_device; + u32 ioc_status; + unsigned long flags; + u64 sas_address; + struct scsi_target *starget; + struct MPT2SAS_TARGET *sas_target_priv_data; + u32 device_info; + + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) + return; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + return; + + /* check if this is end device */ + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); + if (!(_scsih_is_end_device(device_info))) + return; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_address); + + if (!sas_device) { + printk(MPT2SAS_ERR_FMT "device is not present " + "handle(0x%04x), no sas_device!!!\n", ioc->name, handle); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + + if (unlikely(sas_device->handle != handle)) { + starget = sas_device->starget; + sas_target_priv_data = starget->hostdata; + starget_printk(KERN_INFO, starget, "handle changed from(0x%04x)" + " to (0x%04x)!!!\n", sas_device->handle, handle); + sas_target_priv_data->handle = handle; + sas_device->handle = handle; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + + /* check if device is present */ + if (!(le16_to_cpu(sas_device_pg0.Flags) & + MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) { + printk(MPT2SAS_ERR_FMT "device is not present " + "handle(0x%04x), flags!!!\n", ioc->name, handle); + return; + } + + /* check if there were any issues with discovery */ + if (_scsih_check_access_status(ioc, sas_address, handle, + sas_device_pg0.AccessStatus)) + return; + _scsih_ublock_io_device(ioc, handle); + +} + /** * _scsih_add_device - creating sas device object * @ioc: per adapter object @@ -3955,6 +4082,8 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd) return -1; } + sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + /* check if device is present */ if (!(le16_to_cpu(sas_device_pg0.Flags) & MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) { @@ -3965,15 +4094,10 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd) return -1; } - /* check if there were any issus with discovery */ - if (sas_device_pg0.AccessStatus == - MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); - printk(MPT2SAS_ERR_FMT "AccessStatus = 0x%02x\n", - ioc->name, sas_device_pg0.AccessStatus); + /* check if there were any issues with discovery */ + if (_scsih_check_access_status(ioc, sas_address, handle, + sas_device_pg0.AccessStatus)) return -1; - } /* check if this is end device */ device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); @@ -3983,17 +4107,14 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd) return -1; } - sas_address = le64_to_cpu(sas_device_pg0.SASAddress); spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, sas_address); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); - if (sas_device) { - _scsih_ublock_io_device(ioc, handle); + if (sas_device) return 0; - } sas_device = kzalloc(sizeof(struct _sas_device), GFP_KERNEL); @@ -4308,8 +4429,10 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, mpt2sas_transport_update_links(ioc, sas_address, handle, phy_number, link_rate); - if (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5) - _scsih_ublock_io_device(ioc, handle); + if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5) + break; + + _scsih_check_device(ioc, handle); break; case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: -- cgit v1.2.2 From e94f67472106e5a0e97c79090211c551e69e889b Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 16:24:52 +0530 Subject: [SCSI] mpt2sas: Fix for little endian 1. Fixes for little endian issues. 2. Now Debug info for Discovery event is more readable. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 22 +++++++++++++++++++--- drivers/scsi/mpt2sas/mpt2sas_config.c | 6 +++--- drivers/scsi/mpt2sas/mpt2sas_ctl.c | 26 ++++++++++++++------------ drivers/scsi/mpt2sas/mpt2sas_scsih.c | 15 ++++++++------- drivers/scsi/mpt2sas/mpt2sas_transport.c | 3 ++- 5 files changed, 46 insertions(+), 26 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index b7b6285a3061..6f786349679f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -285,6 +285,9 @@ _base_sas_ioc_info(struct MPT2SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply, request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION) return; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + return; + switch (ioc_status) { /**************************************************************************** @@ -517,8 +520,18 @@ _base_display_event_data(struct MPT2SAS_ADAPTER *ioc, desc = "IR Operation Status"; break; case MPI2_EVENT_SAS_DISCOVERY: - desc = "Discovery"; - break; + { + Mpi2EventDataSasDiscovery_t *event_data = + (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData; + printk(MPT2SAS_INFO_FMT "Discovery: (%s)", ioc->name, + (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? + "start" : "stop"); + if (event_data->DiscoveryStatus) + printk("discovery_status(0x%08x)", + le32_to_cpu(event_data->DiscoveryStatus)); + printk("\n"); + return; + } case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: desc = "SAS Broadcast Primitive"; break; @@ -3184,7 +3197,7 @@ _base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) mpi_request->VP_ID = 0; for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) mpi_request->EventMasks[i] = - le32_to_cpu(ioc->event_masks[i]); + cpu_to_le32(ioc->event_masks[i]); mpt2sas_base_put_smid_default(ioc, smid); init_completion(&ioc->base_cmds.done); timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ); @@ -3648,6 +3661,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) pci_set_drvdata(ioc->pdev, NULL); kfree(ioc->tm_cmds.reply); kfree(ioc->transport_cmds.reply); + kfree(ioc->scsih_cmds.reply); kfree(ioc->config_cmds.reply); kfree(ioc->base_cmds.reply); kfree(ioc->ctl_cmds.reply); @@ -3655,6 +3669,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) ioc->ctl_cmds.reply = NULL; ioc->base_cmds.reply = NULL; ioc->tm_cmds.reply = NULL; + ioc->scsih_cmds.reply = NULL; ioc->transport_cmds.reply = NULL; ioc->config_cmds.reply = NULL; ioc->pfacts = NULL; @@ -3684,6 +3699,7 @@ mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc) kfree(ioc->base_cmds.reply); kfree(ioc->tm_cmds.reply); kfree(ioc->transport_cmds.reply); + kfree(ioc->scsih_cmds.reply); kfree(ioc->config_cmds.reply); } diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c index cf44b355bc97..6f713fd57089 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_config.c +++ b/drivers/scsi/mpt2sas/mpt2sas_config.c @@ -1390,12 +1390,12 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, if (ioc_status != MPI2_IOCSTATUS_SUCCESS) goto out; for (i = 0; i < config_page->NumElements; i++) { - if ((config_page->ConfigElement[i].ElementFlags & + if ((le16_to_cpu(config_page->ConfigElement[i].ElementFlags) & MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE) != MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT) continue; - if (config_page->ConfigElement[i].PhysDiskDevHandle == - pd_handle) { + if (le16_to_cpu(config_page->ConfigElement[i]. + PhysDiskDevHandle) == pd_handle) { *volume_handle = le16_to_cpu(config_page-> ConfigElement[i].VolDevHandle); r = 0; diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index fa9bf83819d5..ae55a912baf4 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -533,7 +533,7 @@ _ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg, if (!found) { dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "handle(0x%04x), lun(%d), no active mid!!\n", ioc->name, - desc, tm_request->DevHandle, lun)); + desc, le16_to_cpu(tm_request->DevHandle), lun)); tm_reply = ioc->ctl_cmds.reply; tm_reply->DevHandle = tm_request->DevHandle; tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; @@ -551,7 +551,8 @@ _ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg, dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name, - desc, tm_request->DevHandle, lun, tm_request->TaskMID)); + desc, le16_to_cpu(tm_request->DevHandle), lun, + le16_to_cpu(tm_request->TaskMID))); return 0; } @@ -647,9 +648,9 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) { - if (!mpi_request->FunctionDependent1 || - mpi_request->FunctionDependent1 > - cpu_to_le16(ioc->facts.MaxDevHandle)) { + if (!le16_to_cpu(mpi_request->FunctionDependent1) || + le16_to_cpu(mpi_request->FunctionDependent1) > + ioc->facts.MaxDevHandle) { ret = -EINVAL; mpt2sas_base_free_smid(ioc, smid); goto out; @@ -897,11 +898,11 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { printk(MPT2SAS_INFO_FMT "issue target reset: handle " "= (0x%04x)\n", ioc->name, - mpi_request->FunctionDependent1); + le16_to_cpu(mpi_request->FunctionDependent1)); mpt2sas_halt_firmware(ioc); mutex_lock(&ioc->tm_cmds.mutex); mpt2sas_scsih_issue_tm(ioc, - mpi_request->FunctionDependent1, 0, + le16_to_cpu(mpi_request->FunctionDependent1), 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10); ioc->tm_cmds.status = MPT2_CMD_NOT_USED; mutex_unlock(&ioc->tm_cmds.mutex); @@ -1373,7 +1374,8 @@ _ctl_diag_register_2(struct MPT2SAS_ADAPTER *ioc, dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(0x%p), " "dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data, - (unsigned long long)request_data_dma, mpi_request->BufferLength)); + (unsigned long long)request_data_dma, + le32_to_cpu(mpi_request->BufferLength))); for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++) mpi_request->ProductSpecific[i] = @@ -2334,8 +2336,8 @@ _ctl_version_nvdata_persistent_show(struct device *cdev, struct Scsi_Host *shost = class_to_shost(cdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); - return snprintf(buf, PAGE_SIZE, "%02xh\n", - le16_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word)); + return snprintf(buf, PAGE_SIZE, "%08xh\n", + le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word)); } static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO, _ctl_version_nvdata_persistent_show, NULL); @@ -2354,8 +2356,8 @@ _ctl_version_nvdata_default_show(struct device *cdev, struct Scsi_Host *shost = class_to_shost(cdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); - return snprintf(buf, PAGE_SIZE, "%02xh\n", - le16_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word)); + return snprintf(buf, PAGE_SIZE, "%08xh\n", + le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word)); } static DEVICE_ATTR(version_nvdata_default, S_IRUGO, _ctl_version_nvdata_default_show, NULL); diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index afd3b82f7cd6..3d1be440ed7b 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -1376,7 +1376,7 @@ _scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc, } flags = le16_to_cpu(sas_device_pg0.Flags); - device_info = le16_to_cpu(sas_device_pg0.DeviceInfo); + device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); sdev_printk(KERN_INFO, sdev, "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), " @@ -3210,8 +3210,8 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, struct sense_info data; _scsih_normalize_sense(scmd->sense_buffer, &data); printk(MPT2SAS_WARN_FMT "\t[sense_key,asc,ascq]: " - "[0x%02x,0x%02x,0x%02x]\n", ioc->name, data.skey, - data.asc, data.ascq); + "[0x%02x,0x%02x,0x%02x], count(%d)\n", ioc->name, data.skey, + data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount)); } if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) { @@ -3265,7 +3265,7 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS; mpi_request.SlotStatus = - MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT; + cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT); mpi_request.DevHandle = cpu_to_le16(handle); mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS; if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply, @@ -5934,6 +5934,7 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, struct fw_event_work *fw_event; Mpi2EventNotificationReply_t *mpi_reply; u16 event; + u16 sz; /* events turned off due to host reset or driver unloading */ if (ioc->remove_host) @@ -5984,8 +5985,8 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, ioc->name, __FILE__, __LINE__, __func__); return 1; } - fw_event->event_data = - kzalloc(mpi_reply->EventDataLength*4, GFP_ATOMIC); + sz = le16_to_cpu(mpi_reply->EventDataLength) * 4; + fw_event->event_data = kzalloc(sz, GFP_ATOMIC); if (!fw_event->event_data) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); @@ -5994,7 +5995,7 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, } memcpy(fw_event->event_data, mpi_reply->EventData, - mpi_reply->EventDataLength*4); + sz); fw_event->ioc = ioc; fw_event->VF_ID = mpi_reply->VF_ID; fw_event->VP_ID = mpi_reply->VP_ID; diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index bd7ca2b49f81..9b585f02e804 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -1341,7 +1341,8 @@ _transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); req->sense_len = sizeof(*mpi_reply); req->resid_len = 0; - rsp->resid_len -= mpi_reply->ResponseDataLength; + rsp->resid_len -= + le16_to_cpu(mpi_reply->ResponseDataLength); } else { dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - no reply\n", ioc->name, __func__)); -- cgit v1.2.2 From 8ed9a03ad4c1b6c5ae163e5e9f140852be0273a1 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 16:25:59 +0530 Subject: [SCSI] mpt2sas: removed use of tm_cmds.mutex in IOCTL branch. Removed all the mutex's for ioc->tm_cmds.mutex, then created one single mutex inside the function mpt2sas_scsih_issue_tm. This is the single function used when sending task management. Also the sanity checks required for scsi mid layer escalation were moved to inside the same function because these checks need to be done while the mutex is held. The ioc->tm_cmds.mutex inside the IOCTL branch is really not required since there is another mutex in this code called for ctl_cmds handling this sync. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 5 +- drivers/scsi/mpt2sas/mpt2sas_ctl.c | 13 +-- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 173 ++++++++++++++++++++--------------- 3 files changed, 108 insertions(+), 83 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index cdedfcbb8ca7..9973efd200a5 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -803,8 +803,9 @@ void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc); /* scsih shared API */ u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply); -void mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, - u8 type, u16 smid_task, ulong timeout); +int mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, + uint channel, uint id, uint lun, u8 type, u16 smid_task, + ulong timeout, struct scsi_cmnd *scmd); void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); struct _sas_node *mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index ae55a912baf4..9860e7edd442 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -753,6 +753,10 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, Mpi2SCSITaskManagementRequest_t *tm_request = (Mpi2SCSITaskManagementRequest_t *)mpi_request; + dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "TASK_MGMT: " + "handle(0x%04x), task_type(0x%02x)\n", ioc->name, + le16_to_cpu(tm_request->DevHandle), tm_request->TaskType)); + if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK || tm_request->TaskType == @@ -763,7 +767,6 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, } } - mutex_lock(&ioc->tm_cmds.mutex); mpt2sas_scsih_set_tm_flag(ioc, le16_to_cpu( tm_request->DevHandle)); mpt2sas_base_put_smid_hi_priority(ioc, smid); @@ -819,7 +822,6 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) { Mpi2SCSITaskManagementRequest_t *tm_request = (Mpi2SCSITaskManagementRequest_t *)mpi_request; - mutex_unlock(&ioc->tm_cmds.mutex); mpt2sas_scsih_clear_tm_flag(ioc, le16_to_cpu( tm_request->DevHandle)); } else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH || @@ -900,12 +902,11 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, "= (0x%04x)\n", ioc->name, le16_to_cpu(mpi_request->FunctionDependent1)); mpt2sas_halt_firmware(ioc); - mutex_lock(&ioc->tm_cmds.mutex); mpt2sas_scsih_issue_tm(ioc, - le16_to_cpu(mpi_request->FunctionDependent1), 0, - MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10); + le16_to_cpu(mpi_request->FunctionDependent1), 0, 0, + 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10, + NULL); ioc->tm_cmds.status = MPT2_CMD_NOT_USED; - mutex_unlock(&ioc->tm_cmds.mutex); } else mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 3d1be440ed7b..cfaefd10515d 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -1944,65 +1944,78 @@ mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) } } + /** * mpt2sas_scsih_issue_tm - main routine for sending tm requests * @ioc: per adapter struct * @device_handle: device handle + * @channel: the channel assigned by the OS + * @id: the id assigned by the OS * @lun: lun number * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h) * @smid_task: smid assigned to the task * @timeout: timeout in seconds - * Context: The calling function needs to acquire the tm_cmds.mutex + * Context: user * * A generic API for sending task management requests to firmware. * - * The ioc->tm_cmds.status flag should be MPT2_CMD_NOT_USED before calling - * this API. - * * The callback index is set inside `ioc->tm_cb_idx`. * - * Return nothing. + * Return SUCCESS or FAILED. */ -void -mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, - u8 type, u16 smid_task, ulong timeout) +int +mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint channel, + uint id, uint lun, u8 type, u16 smid_task, ulong timeout, + struct scsi_cmnd *scmd) { Mpi2SCSITaskManagementRequest_t *mpi_request; Mpi2SCSITaskManagementReply_t *mpi_reply; u16 smid = 0; u32 ioc_state; unsigned long timeleft; + struct scsi_cmnd *scmd_lookup; + int rc; + mutex_lock(&ioc->tm_cmds.mutex); if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED) { printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n", __func__, ioc->name); - return; + rc = FAILED; + goto err_out; } if (ioc->shost_recovery || ioc->remove_host) { printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", __func__, ioc->name); - return; + rc = FAILED; + goto err_out; } ioc_state = mpt2sas_base_get_iocstate(ioc, 0); if (ioc_state & MPI2_DOORBELL_USED) { dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "unexpected doorbell " "active!\n", ioc->name)); - goto issue_host_reset; + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + rc = SUCCESS; + goto err_out; } if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { mpt2sas_base_fault_info(ioc, ioc_state & MPI2_DOORBELL_DATA_MASK); - goto issue_host_reset; + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + rc = SUCCESS; + goto err_out; } smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx); if (!smid) { printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); - return; + rc = FAILED; + goto err_out; } dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x)," @@ -2016,21 +2029,24 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, mpi_request->DevHandle = cpu_to_le16(handle); mpi_request->TaskType = type; mpi_request->TaskMID = cpu_to_le16(smid_task); - mpi_request->VP_ID = 0; /* TODO */ - mpi_request->VF_ID = 0; int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN); mpt2sas_scsih_set_tm_flag(ioc, handle); init_completion(&ioc->tm_cmds.done); mpt2sas_base_put_smid_hi_priority(ioc, smid); timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ); - mpt2sas_scsih_clear_tm_flag(ioc, handle); if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) { printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, __func__); _debug_dump_mf(mpi_request, sizeof(Mpi2SCSITaskManagementRequest_t)/4); - if (!(ioc->tm_cmds.status & MPT2_CMD_RESET)) - goto issue_host_reset; + if (!(ioc->tm_cmds.status & MPT2_CMD_RESET)) { + mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + rc = SUCCESS; + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mpt2sas_scsih_clear_tm_flag(ioc, handle); + goto err_out; + } } if (ioc->tm_cmds.status & MPT2_CMD_REPLY_VALID) { @@ -2040,12 +2056,57 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun, ioc->name, le16_to_cpu(mpi_reply->IOCStatus), le32_to_cpu(mpi_reply->IOCLogInfo), le32_to_cpu(mpi_reply->TerminationCount))); - if (ioc->logging_level & MPT_DEBUG_TM) + if (ioc->logging_level & MPT_DEBUG_TM) { _scsih_response_code(ioc, mpi_reply->ResponseCode); + if (mpi_reply->IOCStatus) + _debug_dump_mf(mpi_request, + sizeof(Mpi2SCSITaskManagementRequest_t)/4); + } } - return; - issue_host_reset: - mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); + + /* sanity check: + * Check to see the commands were terminated. + * This is only needed for eh callbacks, hence the scmd check. + */ + rc = FAILED; + if (scmd == NULL) + goto bypass_sanity_checks; + switch (type) { + case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK: + scmd_lookup = _scsih_scsi_lookup_get(ioc, smid_task); + if (scmd_lookup && (scmd_lookup->serial_number == + scmd->serial_number)) + rc = FAILED; + else + rc = SUCCESS; + break; + + case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET: + if (_scsih_scsi_lookup_find_by_target(ioc, id, channel)) + rc = FAILED; + else + rc = SUCCESS; + break; + + case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET: + if (_scsih_scsi_lookup_find_by_lun(ioc, id, lun, channel)) + rc = FAILED; + else + rc = SUCCESS; + break; + } + + bypass_sanity_checks: + + mpt2sas_scsih_clear_tm_flag(ioc, handle); + ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mutex_unlock(&ioc->tm_cmds.mutex); + + return rc; + + err_out: + mutex_unlock(&ioc->tm_cmds.mutex); + return rc; } /** @@ -2062,7 +2123,6 @@ _scsih_abort(struct scsi_cmnd *scmd) u16 smid; u16 handle; int r; - struct scsi_cmnd *scmd_lookup; printk(MPT2SAS_INFO_FMT "attempting task abort! scmd(%p)\n", ioc->name, scmd); @@ -2097,19 +2157,10 @@ _scsih_abort(struct scsi_cmnd *scmd) mpt2sas_halt_firmware(ioc); - mutex_lock(&ioc->tm_cmds.mutex); handle = sas_device_priv_data->sas_target->handle; - mpt2sas_scsih_issue_tm(ioc, handle, sas_device_priv_data->lun, - MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30); - - /* sanity check - see whether command actually completed */ - scmd_lookup = _scsih_scsi_lookup_get(ioc, smid); - if (scmd_lookup && (scmd_lookup->serial_number == scmd->serial_number)) - r = FAILED; - else - r = SUCCESS; - ioc->tm_cmds.status = MPT2_CMD_NOT_USED; - mutex_unlock(&ioc->tm_cmds.mutex); + r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel, + scmd->device->id, scmd->device->lun, + MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, scmd); out: printk(MPT2SAS_INFO_FMT "task abort: %s scmd(%p)\n", @@ -2166,22 +2217,9 @@ _scsih_dev_reset(struct scsi_cmnd *scmd) goto out; } - mutex_lock(&ioc->tm_cmds.mutex); - mpt2sas_scsih_issue_tm(ioc, handle, 0, - MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, scmd->device->lun, - 30); - - /* - * sanity check see whether all commands to this device been - * completed - */ - if (_scsih_scsi_lookup_find_by_lun(ioc, scmd->device->id, - scmd->device->lun, scmd->device->channel)) - r = FAILED; - else - r = SUCCESS; - ioc->tm_cmds.status = MPT2_CMD_NOT_USED; - mutex_unlock(&ioc->tm_cmds.mutex); + r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel, + scmd->device->id, scmd->device->lun, + MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30, scmd); out: printk(MPT2SAS_INFO_FMT "device reset: %s scmd(%p)\n", @@ -2238,21 +2276,9 @@ _scsih_target_reset(struct scsi_cmnd *scmd) goto out; } - mutex_lock(&ioc->tm_cmds.mutex); - mpt2sas_scsih_issue_tm(ioc, handle, 0, - MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30); - - /* - * sanity check see whether all commands to this target been - * completed - */ - if (_scsih_scsi_lookup_find_by_target(ioc, scmd->device->id, - scmd->device->channel)) - r = FAILED; - else - r = SUCCESS; - ioc->tm_cmds.status = MPT2_CMD_NOT_USED; - mutex_unlock(&ioc->tm_cmds.mutex); + r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel, + scmd->device->id, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, + 30, scmd); out: printk(MPT2SAS_INFO_FMT "target reset: %s scmd(%p)\n", @@ -4183,8 +4209,8 @@ _scsih_remove_pd_device(struct MPT2SAS_ADAPTER *ioc, struct _sas_device return; dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset: " "handle(0x%04x)\n", ioc->name, vol_handle)); - mpt2sas_scsih_issue_tm(ioc, vol_handle, 0, - MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30); + mpt2sas_scsih_issue_tm(ioc, vol_handle, 0, 0, 0, + MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30, NULL); dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset " "done: handle(0x%04x)\n", ioc->name, vol_handle)); if (ioc->shost_recovery) @@ -4668,7 +4694,6 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name, __func__)); - mutex_lock(&ioc->tm_cmds.mutex); termination_count = 0; query_count = 0; mpi_reply = ioc->tm_cmds.reply; @@ -4692,8 +4717,8 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, lun = sas_device_priv_data->lun; query_count++; - mpt2sas_scsih_issue_tm(ioc, handle, lun, - MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30); + mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun, + MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30, NULL); ioc->tm_cmds.status = MPT2_CMD_NOT_USED; ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; @@ -4704,13 +4729,11 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) continue; - mpt2sas_scsih_issue_tm(ioc, handle, lun, - MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30); - ioc->tm_cmds.status = MPT2_CMD_NOT_USED; + mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun, + MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30, NULL); termination_count += le32_to_cpu(mpi_reply->TerminationCount); } ioc->broadcast_aen_busy = 0; - mutex_unlock(&ioc->tm_cmds.mutex); dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - exit, query_count = %d termination_count = %d\n", -- cgit v1.2.2 From f6aee7b9aee96ef18354f0f86e65ec635ee5039f Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 16:26:48 +0530 Subject: [SCSI] mpt2sas: return -ENOMEM if memory allocation failed. Added proper return type values in case memory allocation failed. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 6f786349679f..6c384dac5ec5 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -3580,8 +3580,10 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts, sizeof(Mpi2PortFactsReply_t), GFP_KERNEL); - if (!ioc->pfacts) + if (!ioc->pfacts) { + r = -ENOMEM; goto out_free_resources; + } for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) { r = _base_get_port_facts(ioc, i, CAN_SLEEP); @@ -3627,6 +3629,13 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) ioc->ctl_cmds.status = MPT2_CMD_NOT_USED; mutex_init(&ioc->ctl_cmds.mutex); + if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply || + !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply || + !ioc->config_cmds.reply || !ioc->ctl_cmds.reply) { + r = -ENOMEM; + goto out_free_resources; + } + init_completion(&ioc->shost_recovery_done); for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) -- cgit v1.2.2 From 58287fd59c3c7b1f69715aefda888b0e1ccd68a3 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 16:27:25 +0530 Subject: [SCSI] mpt2sas: Default descriptor for RAID Passthru command. RAID_SCSI_IO_PASSTHROUGH: Driver needs to be send the default descriptor for RAID Passthru, currently its sending SCSI_IO descriptor. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index cfaefd10515d..4fdbb0bbfa0b 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -3045,8 +3045,11 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) } } - mpt2sas_base_put_smid_scsi_io(ioc, smid, - sas_device_priv_data->sas_target->handle); + if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) + mpt2sas_base_put_smid_scsi_io(ioc, smid, + sas_device_priv_data->sas_target->handle); + else + mpt2sas_base_put_smid_default(ioc, smid); return 0; out: -- cgit v1.2.2 From 31b7f2e25d4b30d9b8701a6820c8e521cf409c29 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 16:28:04 +0530 Subject: [SCSI] mpt2sas: Copyright 2010. Copyright changes for year 2010. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/Kconfig | 2 +- drivers/scsi/mpt2sas/mpi/mpi2.h | 2 +- drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 2 +- drivers/scsi/mpt2sas/mpi/mpi2_history.txt | 2 +- drivers/scsi/mpt2sas/mpi/mpi2_init.h | 2 +- drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 2 +- drivers/scsi/mpt2sas/mpi/mpi2_tool.h | 2 +- drivers/scsi/mpt2sas/mpt2sas_base.c | 2 +- drivers/scsi/mpt2sas/mpt2sas_base.h | 2 +- drivers/scsi/mpt2sas/mpt2sas_config.c | 2 +- drivers/scsi/mpt2sas/mpt2sas_ctl.c | 2 +- drivers/scsi/mpt2sas/mpt2sas_ctl.h | 2 +- drivers/scsi/mpt2sas/mpt2sas_debug.h | 2 +- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 2 +- drivers/scsi/mpt2sas/mpt2sas_transport.c | 2 +- 15 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/mpt2sas/Kconfig b/drivers/scsi/mpt2sas/Kconfig index ba8e128de238..bbb7e4bf30a3 100644 --- a/drivers/scsi/mpt2sas/Kconfig +++ b/drivers/scsi/mpt2sas/Kconfig @@ -2,7 +2,7 @@ # Kernel configuration file for the MPT2SAS # # This code is based on drivers/scsi/mpt2sas/Kconfig -# Copyright (C) 2007-2009 LSI Corporation +# Copyright (C) 2007-2010 LSI Corporation # (mailto:DL-MPTFusionLinux@lsi.com) # This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h index 9958d847a88d..dada0a13223f 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2009 LSI Corporation. + * Copyright (c) 2000-2010 LSI Corporation. * * * Name: mpi2.h diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h index cf0ac9f40c97..d4e9d6f8452e 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2009 LSI Corporation. + * Copyright (c) 2000-2010 LSI Corporation. * * * Name: mpi2_cnfg.h diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt index c4adf76b49d9..bd6c92b5fae5 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt +++ b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt @@ -2,7 +2,7 @@ Fusion-MPT MPI 2.0 Header File Change History ============================== - Copyright (c) 2000-2009 LSI Corporation. + Copyright (c) 2000-2010 LSI Corporation. --------------------------------------- Header Set Release Version: 02.00.14 diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h index 6541945e97c3..220bf65a9216 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2009 LSI Corporation. + * Copyright (c) 2000-2010 LSI Corporation. * * * Name: mpi2_init.h diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h index 754938422f6a..f18f114922ba 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2009 LSI Corporation. + * Copyright (c) 2000-2010 LSI Corporation. * * * Name: mpi2_ioc.h diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h index 73fcdbf92632..686b09b81219 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2009 LSI Corporation. + * Copyright (c) 2000-2010 LSI Corporation. * * * Name: mpi2_tool.h diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 6c384dac5ec5..f980b8822f92 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -3,7 +3,7 @@ * for access to MPT (Message Passing Technology) firmware. * * This code is based on drivers/scsi/mpt2sas/mpt2_base.c - * Copyright (C) 2007-2009 LSI Corporation + * Copyright (C) 2007-2010 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 9973efd200a5..752078d6a5d9 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -3,7 +3,7 @@ * for access to MPT (Message Passing Technology) firmware. * * This code is based on drivers/scsi/mpt2sas/mpt2_base.h - * Copyright (C) 2007-2009 LSI Corporation + * Copyright (C) 2007-2010 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c index 6f713fd57089..e762dd3e2fcb 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_config.c +++ b/drivers/scsi/mpt2sas/mpt2sas_config.c @@ -2,7 +2,7 @@ * This module provides common API for accessing firmware configuration pages * * This code is based on drivers/scsi/mpt2sas/mpt2_base.c - * Copyright (C) 2007-2009 LSI Corporation + * Copyright (C) 2007-2010 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 9860e7edd442..ddaa99cdce81 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -3,7 +3,7 @@ * controllers * * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c - * Copyright (C) 2007-2009 LSI Corporation + * Copyright (C) 2007-2010 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h index 8a5eeb1a5c84..69916e46e04f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h @@ -3,7 +3,7 @@ * controllers * * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h - * Copyright (C) 2007-2009 LSI Corporation + * Copyright (C) 2007-2010 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt2sas/mpt2sas_debug.h b/drivers/scsi/mpt2sas/mpt2sas_debug.h index 5308a25cb307..3dcddfeb6f4c 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_debug.h +++ b/drivers/scsi/mpt2sas/mpt2sas_debug.h @@ -2,7 +2,7 @@ * Logging Support for MPT (Message Passing Technology) based controllers * * This code is based on drivers/scsi/mpt2sas/mpt2_debug.c - * Copyright (C) 2007-2009 LSI Corporation + * Copyright (C) 2007-2010 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 4fdbb0bbfa0b..b0d598ec71c0 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2,7 +2,7 @@ * Scsi Host Layer for MPT (Message Passing Technology) based controllers * * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c - * Copyright (C) 2007-2009 LSI Corporation + * Copyright (C) 2007-2010 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index 9b585f02e804..bb2d2c93718b 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -2,7 +2,7 @@ * SAS Transport Layer for MPT (Message Passing Technology) based controllers * * This code is based on drivers/scsi/mpt2sas/mpt2_transport.c - * Copyright (C) 2007-2009 LSI Corporation + * Copyright (C) 2007-2010 LSI Corporation * (mailto:DL-MPTFusionLinux@lsi.com) * * This program is free software; you can redistribute it and/or -- cgit v1.2.2 From 1a7d7eac6f651c00e954023dd2542f0c65ef66b7 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 17 Mar 2010 16:28:34 +0530 Subject: [SCSI] mpt2sas: Bump version 05.100.00.00 Upgraded version string. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 752078d6a5d9..2616bb1597b0 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -69,11 +69,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "04.100.01.02" -#define MPT2SAS_MAJOR_VERSION 04 +#define MPT2SAS_DRIVER_VERSION "05.100.00.00" +#define MPT2SAS_MAJOR_VERSION 05 #define MPT2SAS_MINOR_VERSION 100 -#define MPT2SAS_BUILD_VERSION 01 -#define MPT2SAS_RELEASE_VERSION 02 +#define MPT2SAS_BUILD_VERSION 00 +#define MPT2SAS_RELEASE_VERSION 00 /* * Set MPT2SAS_SG_DEPTH value based on user input. -- cgit v1.2.2 From d0f698c46141e1d179fb3a86a0ae668d2fd12916 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:12:17 +0530 Subject: [SCSI] mptfusion: Added new less expensive RESET (Message Unit Reset) Message Unit Reset - instructs the IOC to reset the Reply Post and Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. All posted buffers are freed, and event notification is turned off. IOC doesnt reply to any outstanding request. This will transfer IOC to READY state. Message unit ready is less expensive operations than Hard Reset. soft reset will not force Firmware to reload again, it only do clean up of Message units. mpt_Soft_Hard_ResetHandler will first try for Soft Reset,if it fails then go for big hammer reset which is Hard Reset. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 170 +++++++++++++++++++++++++++++++++++++- drivers/message/fusion/mptbase.h | 1 + drivers/message/fusion/mptctl.c | 2 +- drivers/message/fusion/mptsas.c | 8 +- drivers/message/fusion/mptscsih.c | 6 +- 5 files changed, 177 insertions(+), 10 deletions(-) diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 5382b5a44aff..a4f023bd5d2b 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -5064,7 +5064,7 @@ mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode) if (!timeleft) { printk(KERN_DEBUG "%s: Issuing Reset from %s!!\n", ioc->name, __func__); - mpt_HardResetHandler(ioc, CAN_SLEEP); + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); mpt_free_msg_frame(ioc, mf); } goto out; @@ -6456,7 +6456,7 @@ out: issue_hard_reset = 0; printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n", ioc->name, __func__); - mpt_HardResetHandler(ioc, CAN_SLEEP); + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); mpt_free_msg_frame(ioc, mf); /* attempt one retry for a timed out command */ if (!retry_count) { @@ -6904,6 +6904,172 @@ mpt_halt_firmware(MPT_ADAPTER *ioc) } EXPORT_SYMBOL(mpt_halt_firmware); +/** + * mpt_SoftResetHandler - Issues a less expensive reset + * @ioc: Pointer to MPT_ADAPTER structure + * @sleepFlag: Indicates if sleep or schedule must be called. + + * + * Returns 0 for SUCCESS or -1 if FAILED. + * + * Message Unit Reset - instructs the IOC to reset the Reply Post and + * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. + * All posted buffers are freed, and event notification is turned off. + * IOC doesnt reply to any outstanding request. This will transfer IOC + * to READY state. + **/ +int +mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag) +{ + int rc; + int ii; + u8 cb_idx; + unsigned long flags; + u32 ioc_state; + unsigned long time_count; + + dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n", + ioc->name)); + + ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; + + if (mpt_fwfault_debug) + mpt_halt_firmware(ioc); + + if (ioc_state == MPI_IOC_STATE_FAULT || + ioc_state == MPI_IOC_STATE_RESET) { + dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT + "skipping, either in FAULT or RESET state!\n", ioc->name)); + return -1; + } + + if (ioc->bus_type == FC) { + dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT + "skipping, because the bus type is FC!\n", ioc->name)); + return -1; + } + + spin_lock_irqsave(&ioc->taskmgmt_lock, flags); + if (ioc->ioc_reset_in_progress) { + spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); + return -1; + } + ioc->ioc_reset_in_progress = 1; + spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); + + rc = -1; + + for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { + if (MptResetHandlers[cb_idx]) + mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET); + } + + spin_lock_irqsave(&ioc->taskmgmt_lock, flags); + if (ioc->taskmgmt_in_progress) { + spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); + return -1; + } + spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); + /* Disable reply interrupts (also blocks FreeQ) */ + CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF); + ioc->active = 0; + time_count = jiffies; + + rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag); + + for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { + if (MptResetHandlers[cb_idx]) + mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET); + } + + if (rc) + goto out; + + ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK; + if (ioc_state != MPI_IOC_STATE_READY) + goto out; + + for (ii = 0; ii < 5; ii++) { + /* Get IOC facts! Allow 5 retries */ + rc = GetIocFacts(ioc, sleepFlag, + MPT_HOSTEVENT_IOC_RECOVER); + if (rc == 0) + break; + if (sleepFlag == CAN_SLEEP) + msleep(100); + else + mdelay(100); + } + if (ii == 5) + goto out; + + rc = PrimeIocFifos(ioc); + if (rc != 0) + goto out; + + rc = SendIocInit(ioc, sleepFlag); + if (rc != 0) + goto out; + + rc = SendEventNotification(ioc, 1, sleepFlag); + if (rc != 0) + goto out; + + if (ioc->hard_resets < -1) + ioc->hard_resets++; + + /* + * At this point, we know soft reset succeeded. + */ + + ioc->active = 1; + CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM); + + out: + spin_lock_irqsave(&ioc->taskmgmt_lock, flags); + ioc->ioc_reset_in_progress = 0; + ioc->taskmgmt_quiesce_io = 0; + ioc->taskmgmt_in_progress = 0; + spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); + + if (ioc->active) { /* otherwise, hard reset coming */ + for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) { + if (MptResetHandlers[cb_idx]) + mpt_signal_reset(cb_idx, ioc, + MPT_IOC_POST_RESET); + } + } + + dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT + "SoftResetHandler: completed (%d seconds): %s\n", + ioc->name, jiffies_to_msecs(jiffies - time_count)/1000, + ((rc == 0) ? "SUCCESS" : "FAILED"))); + + return rc; +} + +/** + * mpt_Soft_Hard_ResetHandler - Try less expensive reset + * @ioc: Pointer to MPT_ADAPTER structure + * @sleepFlag: Indicates if sleep or schedule must be called. + + * + * Returns 0 for SUCCESS or -1 if FAILED. + * Try for softreset first, only if it fails go for expensive + * HardReset. + **/ +int +mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) { + int ret = -1; + + ret = mpt_SoftResetHandler(ioc, sleepFlag); + if (ret == 0) + return ret; + ret = mpt_HardResetHandler(ioc, sleepFlag); + return ret; +} +EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler); + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * Reset Handling diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index 9718c8f2e959..e25dbfbb8fdf 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -940,6 +940,7 @@ extern int mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp); extern u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked); extern void mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan); extern int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag); +extern int mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag); extern int mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg); extern int mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size); extern void mpt_free_fw_memory(MPT_ADAPTER *ioc); diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index 80421d2cf049..e6d71e20fa09 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -311,7 +311,7 @@ mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n", ioc->name)); CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status) - mpt_HardResetHandler(ioc, CAN_SLEEP); + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); mpt_free_msg_frame(ioc, mf); } diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 76687126b573..e5e9bf3487db 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -2041,7 +2041,7 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset) if (!timeleft) { /* On timeout reset the board */ mpt_free_msg_frame(ioc, mf); - mpt_HardResetHandler(ioc, CAN_SLEEP); + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); error = -ETIMEDOUT; goto out_unlock; } @@ -2226,7 +2226,7 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, if (!timeleft) { printk(MYIOC_s_ERR_FMT "%s: smp timeout!\n", ioc->name, __func__); /* On timeout reset the board */ - mpt_HardResetHandler(ioc, CAN_SLEEP); + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); ret = -ETIMEDOUT; goto unmap; } @@ -2833,7 +2833,7 @@ mptsas_exp_repmanufacture_info(MPT_ADAPTER *ioc, if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET) goto out_free; if (!timeleft) - mpt_HardResetHandler(ioc, CAN_SLEEP); + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); goto out_free; } @@ -4717,7 +4717,7 @@ mptsas_broadcast_primative_work(struct fw_event_work *fw_event) if (issue_reset) { printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n", ioc->name, __func__); - mpt_HardResetHandler(ioc, CAN_SLEEP); + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); } mptsas_free_fw_event(ioc, fw_event); } diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 6796597dcee0..929d584855d2 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1711,7 +1711,7 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, if (issue_hard_reset) { printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n", ioc->name, __func__); - retval = mpt_HardResetHandler(ioc, CAN_SLEEP); + retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); mpt_free_msg_frame(ioc, mf); } @@ -1991,7 +1991,7 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt) /* If our attempts to reset the host failed, then return a failed * status. The host will be taken off line by the SCSI mid-layer. */ - retval = mpt_HardResetHandler(ioc, CAN_SLEEP); + retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); if (retval < 0) status = FAILED; else @@ -3040,7 +3040,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io) if (!timeleft) { printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n", ioc->name, __func__); - mpt_HardResetHandler(ioc, CAN_SLEEP); + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); mpt_free_msg_frame(ioc, mf); } goto out; -- cgit v1.2.2 From 7d757f18554070e917f61e7caedf395f940cf853 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:13:10 +0530 Subject: [SCSI] mptfusion: Updated SCSI IO IOCTL error handling. Behavior changes only for IOCTLs that time out. Current behavior of Bus Reset remains the same for RAID Passthru Timeouts Current behavior of Diagnostic reset for any other type of IOCTL remains the same CHANGE: For IOCTL SCSI IOs that timeout, a Target Reset TM is sent, instead of Bus Reset. All error handing from that point is the same as what the driver currently does, which is to say that if the Device Reset TM fails it escalates do diagnostic reset. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptctl.c | 161 +++++++++++++++++++++------------------- 1 file changed, 86 insertions(+), 75 deletions(-) diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index e6d71e20fa09..e7fab5de16e7 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -128,7 +128,6 @@ static MptSge_t *kbuf_alloc_2_sgl(int bytes, u32 dir, int sge_offset, int *frags struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc); static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma, struct buflist *buflist, MPT_ADAPTER *ioc); -static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function); /* * Reset Handler cleanup function @@ -275,45 +274,6 @@ mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply) return 1; } -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* mptctl_timeout_expired - * - * Expecting an interrupt, however timed out. - * - */ -static void -mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) -{ - unsigned long flags; - - dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n", - ioc->name, __func__)); - - if (mpt_fwfault_debug) - mpt_halt_firmware(ioc); - - spin_lock_irqsave(&ioc->taskmgmt_lock, flags); - if (ioc->ioc_reset_in_progress) { - spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); - CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status) - mpt_free_msg_frame(ioc, mf); - return; - } - spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); - - - if (!mptctl_bus_reset(ioc, mf->u.hdr.Function)) - return; - - /* Issue a reset for this device. - * The IOC is not responding. - */ - dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n", - ioc->name)); - CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status) - mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); - mpt_free_msg_frame(ioc, mf); -} static int mptctl_taskmgmt_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) @@ -343,12 +303,8 @@ mptctl_taskmgmt_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) return 0; } -/* mptctl_bus_reset - * - * Bus reset code. - * - */ -static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function) +static int +mptctl_do_taskmgmt(MPT_ADAPTER *ioc, u8 tm_type, u8 bus_id, u8 target_id) { MPT_FRAME_HDR *mf; SCSITaskMgmt_t *pScsiTm; @@ -359,13 +315,6 @@ static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function) unsigned long time_count; u16 iocstatus; - /* bus reset is only good for SCSI IO, RAID PASSTHRU */ - if (!(function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || - function == MPI_FUNCTION_SCSI_IO_REQUEST)) { - dtmprintk(ioc, printk(MYIOC_s_WARN_FMT - "TaskMgmt, not SCSI_IO!!\n", ioc->name)); - return -EPERM; - } mutex_lock(&ioc->taskmgmt_cmds.mutex); if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) { @@ -375,15 +324,14 @@ static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function) retval = 0; - /* Send request - */ mf = mpt_get_msg_frame(mptctl_taskmgmt_id, ioc); if (mf == NULL) { - dtmprintk(ioc, printk(MYIOC_s_WARN_FMT - "TaskMgmt, no msg frames!!\n", ioc->name)); + dtmprintk(ioc, + printk(MYIOC_s_WARN_FMT "TaskMgmt, no msg frames!!\n", + ioc->name)); mpt_clear_taskmgmt_in_progress_flag(ioc); retval = -ENOMEM; - goto mptctl_bus_reset_done; + goto tm_done; } dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n", @@ -392,10 +340,13 @@ static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function) pScsiTm = (SCSITaskMgmt_t *) mf; memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t)); pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; - pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS; - pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION; - pScsiTm->TargetID = 0; - pScsiTm->Bus = 0; + pScsiTm->TaskType = tm_type; + if ((tm_type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) && + (ioc->bus_type == FC)) + pScsiTm->MsgFlags = + MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION; + pScsiTm->TargetID = target_id; + pScsiTm->Bus = bus_id; pScsiTm->ChainOffset = 0; pScsiTm->Reserved = 0; pScsiTm->Reserved1 = 0; @@ -413,17 +364,16 @@ static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function) timeout = 30; break; case SPI: - default: - timeout = 2; + default: + timeout = 10; break; } - dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT - "TaskMgmt type=%d timeout=%ld\n", - ioc->name, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, timeout)); + dtmprintk(ioc, + printk(MYIOC_s_DEBUG_FMT "TaskMgmt type=%d timeout=%ld\n", + ioc->name, tm_type, timeout)); INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status) - CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status) time_count = jiffies; if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) && (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) @@ -432,17 +382,20 @@ static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function) retval = mpt_send_handshake_request(mptctl_taskmgmt_id, ioc, sizeof(SCSITaskMgmt_t), (u32 *)pScsiTm, CAN_SLEEP); if (retval != 0) { - dfailprintk(ioc, printk(MYIOC_s_ERR_FMT + dfailprintk(ioc, + printk(MYIOC_s_ERR_FMT "TaskMgmt send_handshake FAILED!" " (ioc %p, mf %p, rc=%d) \n", ioc->name, ioc, mf, retval)); + mpt_free_msg_frame(ioc, mf); mpt_clear_taskmgmt_in_progress_flag(ioc); - goto mptctl_bus_reset_done; + goto tm_done; } } /* Now wait for the command to complete */ ii = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, timeout*HZ); + if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt failed\n", ioc->name)); @@ -452,14 +405,14 @@ static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function) retval = 0; else retval = -1; /* return failure */ - goto mptctl_bus_reset_done; + goto tm_done; } if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) { dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt failed\n", ioc->name)); retval = -1; /* return failure */ - goto mptctl_bus_reset_done; + goto tm_done; } pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply; @@ -467,7 +420,7 @@ static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function) "TaskMgmt fw_channel = %d, fw_id = %d, task_type=0x%02X, " "iocstatus=0x%04X\n\tloginfo=0x%08X, response_code=0x%02X, " "term_cmnds=%d\n", ioc->name, pScsiTmReply->Bus, - pScsiTmReply->TargetID, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, + pScsiTmReply->TargetID, tm_type, le16_to_cpu(pScsiTmReply->IOCStatus), le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode, @@ -485,13 +438,71 @@ static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function) retval = -1; /* return failure */ } - - mptctl_bus_reset_done: + tm_done: mutex_unlock(&ioc->taskmgmt_cmds.mutex); CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status) return retval; } +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* mptctl_timeout_expired + * + * Expecting an interrupt, however timed out. + * + */ +static void +mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) +{ + unsigned long flags; + int ret_val = -1; + SCSIIORequest_t *scsi_req = (SCSIIORequest_t *) mf; + u8 function = mf->u.hdr.Function; + + dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n", + ioc->name, __func__)); + + if (mpt_fwfault_debug) + mpt_halt_firmware(ioc); + + spin_lock_irqsave(&ioc->taskmgmt_lock, flags); + if (ioc->ioc_reset_in_progress) { + spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); + CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status) + mpt_free_msg_frame(ioc, mf); + return; + } + spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags); + + + CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status) + + if (ioc->bus_type == SAS) { + if (function == MPI_FUNCTION_SCSI_IO_REQUEST) + ret_val = mptctl_do_taskmgmt(ioc, + MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, + scsi_req->Bus, scsi_req->TargetID); + else if (function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) + ret_val = mptctl_do_taskmgmt(ioc, + MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, + scsi_req->Bus, 0); + if (!ret_val) + return; + } else { + if ((function == MPI_FUNCTION_SCSI_IO_REQUEST) || + (function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) + ret_val = mptctl_do_taskmgmt(ioc, + MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, + scsi_req->Bus, 0); + if (!ret_val) + return; + } + + dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling Reset! \n", + ioc->name)); + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); + mpt_free_msg_frame(ioc, mf); +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* mptctl_ioc_reset -- cgit v1.2.2 From b3b97316d5861b1708cd7ef2df9989d12d97acb9 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:14:51 +0530 Subject: [SCSI] mptfusion: mpt config will do Hard Reset based upon retry counts mpt_config would only attempt a MUR before retrying the command. The driver will now retry a second time with a hard reset before leaving the function. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index a4f023bd5d2b..a6a57011ba6c 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -6456,10 +6456,15 @@ out: issue_hard_reset = 0; printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n", ioc->name, __func__); - mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); + if (retry_count == 0) { + if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0) + retry_count++; + } else + mpt_HardResetHandler(ioc, CAN_SLEEP); + mpt_free_msg_frame(ioc, mf); /* attempt one retry for a timed out command */ - if (!retry_count) { + if (retry_count < 2) { printk(MYIOC_s_INFO_FMT "Attempting Retry Config request" " type 0x%x, page 0x%x," -- cgit v1.2.2 From 48959f1eae3068fefb3de05cdc0c2bd8f0f96c37 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:18:30 +0530 Subject: [SCSI] mptfusion: mpt_detach is called properly at the time of rmmod Current design of mptsas is as follow. MPTSAS will do probe() if pci id matches for available card in system, irrespective of mode of controller. If controller is I/T mode or I mode, things are fine. If controller is only in T mode, mptsas is not doing complete process of mptsas_probe(). It will only make sure IOC structure is created and IOC reference is available for mptstm driver. Now While removing module we should take care case of Target mode only mptsas. If we are removing IOC which is only in Target mode, We should only detach IOC instead of following rest of the cleanup process which is only required for T mode controller. Now For T mode controller, only part clean up is done instead of complete cleanup. mpt_detach will call early in case of Target mode only controller. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptsas.c | 6 ++++++ drivers/message/fusion/mptscsih.c | 5 ----- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index e5e9bf3487db..674461fb6a3e 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -5073,6 +5073,12 @@ static void __devexit mptsas_remove(struct pci_dev *pdev) struct mptsas_portinfo *p, *n; int i; + if (!ioc->sh) { + printk(MYIOC_s_INFO_FMT "IOC is in Target mode\n", ioc->name); + mpt_detach(pdev); + return; + } + mptsas_shutdown(pdev); mptsas_del_device_components(ioc); diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 929d584855d2..b966678e4419 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1149,11 +1149,6 @@ mptscsih_remove(struct pci_dev *pdev) MPT_SCSI_HOST *hd; int sz1; - if(!host) { - mpt_detach(pdev); - return; - } - scsi_remove_host(host); if((hd = shost_priv(host)) == NULL) -- cgit v1.2.2 From ffb7fef32b98fff773a5a6882ae4f8aee65a7708 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:20:38 +0530 Subject: [SCSI] mptfusion: Proper bus_type check is added Added proper bus_type check before processing event/ reset handler. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptfc.c | 5 ++++- drivers/message/fusion/mptsas.c | 3 +++ drivers/message/fusion/mptspi.c | 5 +++++ 3 files changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 33f7256055b1..8b3ff2d43fb3 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -1358,6 +1358,9 @@ mptfc_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) unsigned long flags; int rc=1; + if (ioc->bus_type != FC) + return 0; + devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n", ioc->name, event)); @@ -1396,7 +1399,7 @@ mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) unsigned long flags; rc = mptscsih_ioc_reset(ioc,reset_phase); - if (rc == 0) + if ((ioc->bus_type != FC) || (!rc)) return rc; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 674461fb6a3e..7f217445cd93 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -4779,6 +4779,9 @@ mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply) struct fw_event_work *fw_event; unsigned long delay; + if (ioc->bus_type != SAS) + return 0; + /* events turned off due to host reset or driver unloading */ if (ioc->fw_events_off) return 0; diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index e44365193fdf..8820591a693b 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -1152,6 +1152,9 @@ mptspi_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); + if (ioc->bus_type != SPI) + return 0; + if (hd && event == MPI_EVENT_INTEGRATED_RAID) { int reason = (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16; @@ -1283,6 +1286,8 @@ mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) int rc; rc = mptscsih_ioc_reset(ioc, reset_phase); + if ((ioc->bus_type != SPI) || (!rc)) + return rc; /* only try to do a renegotiation if we're properly set up * if we get an ioc fault on bringup, ioc->sh will be NULL */ -- cgit v1.2.2 From f8c23bde85091b696e72d00bc6aa16216a9862f7 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:21:34 +0530 Subject: [SCSI] mptfusion: Setting period,offset and width for SPI driver Set factor, offset and width while target negotiation. Added config timeout 60 seconds. It was missing for only mptspi_read_spi_device_pg0 Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptspi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index 8820591a693b..1abaa5d01ae3 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -210,6 +210,10 @@ mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, target->maxOffset = offset; target->maxWidth = width; + spi_min_period(scsi_target(sdev)) = factor; + spi_max_offset(scsi_target(sdev)) = offset; + spi_max_width(scsi_target(sdev)) = width; + target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO; /* Disable unused features. @@ -558,6 +562,7 @@ static int mptspi_read_spi_device_pg0(struct scsi_target *starget, cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; cfg.dir = 0; cfg.pageAddr = starget->id; + cfg.timeout = 60; if (mpt_config(ioc, &cfg)) { starget_printk(KERN_ERR, starget, MYIOC_s_FMT "mpt_config failed\n", ioc->name); -- cgit v1.2.2 From 08f5c5c23d52aa385ff304becffb0e0c37cedfe5 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:22:45 +0530 Subject: [SCSI] mptfusion: sanity check for vdevice pointer is added Added sanity checks before accessing vdevice and added vdevice->deleted setting for mptfc. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptctl.c | 7 +++++++ drivers/message/fusion/mptfc.c | 17 +++++++++++++++++ drivers/message/fusion/mptscsih.c | 2 ++ 3 files changed, 26 insertions(+) diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index e7fab5de16e7..f06b29193b4e 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -1329,6 +1329,8 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size) if (ioc->sh) { shost_for_each_device(sdev, ioc->sh) { vdevice = sdev->hostdata; + if (vdevice == NULL || vdevice->vtarget == NULL) + continue; if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) continue; @@ -1450,6 +1452,8 @@ mptctl_gettargetinfo (unsigned long arg) if (!maxWordsLeft) continue; vdevice = sdev->hostdata; + if (vdevice == NULL || vdevice->vtarget == NULL) + continue; if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) continue; @@ -1978,6 +1982,9 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr) struct scsi_target *starget = scsi_target(sdev); VirtTarget *vtarget = starget->hostdata; + if (vtarget == NULL) + continue; + if ((pScsiReq->TargetID == vtarget->id) && (pScsiReq->Bus == vtarget->channel) && (vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)) diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 8b3ff2d43fb3..b5f03ad81568 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -482,6 +482,7 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0) if (vtarget) { vtarget->id = pg0->CurrentTargetID; vtarget->channel = pg0->CurrentBus; + vtarget->deleted = 0; } } *((struct mptfc_rport_info **)rport->dd_data) = ri; @@ -1092,6 +1093,8 @@ mptfc_setup_reset(struct work_struct *work) container_of(work, MPT_ADAPTER, fc_setup_reset_work); u64 pn; struct mptfc_rport_info *ri; + struct scsi_target *starget; + VirtTarget *vtarget; /* reset about to happen, delete (block) all rports */ list_for_each_entry(ri, &ioc->fc_rports, list) { @@ -1099,6 +1102,12 @@ mptfc_setup_reset(struct work_struct *work) ri->flags &= ~MPT_RPORT_INFO_FLAGS_REGISTERED; fc_remote_port_delete(ri->rport); /* won't sleep */ ri->rport = NULL; + starget = ri->starget; + if (starget) { + vtarget = starget->hostdata; + if (vtarget) + vtarget->deleted = 1; + } pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low; @@ -1119,6 +1128,8 @@ mptfc_rescan_devices(struct work_struct *work) int ii; u64 pn; struct mptfc_rport_info *ri; + struct scsi_target *starget; + VirtTarget *vtarget; /* start by tagging all ports as missing */ list_for_each_entry(ri, &ioc->fc_rports, list) { @@ -1146,6 +1157,12 @@ mptfc_rescan_devices(struct work_struct *work) MPT_RPORT_INFO_FLAGS_MISSING); fc_remote_port_delete(ri->rport); /* won't sleep */ ri->rport = NULL; + starget = ri->starget; + if (starget) { + vtarget = starget->hostdata; + if (vtarget) + vtarget->deleted = 1; + } pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low; diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index b966678e4419..90a1dff7eb84 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -2339,6 +2339,8 @@ mptscsih_slave_destroy(struct scsi_device *sdev) starget = scsi_target(sdev); vtarget = starget->hostdata; vdevice = sdev->hostdata; + if (!vdevice) + return; mptscsih_search_running_cmds(hd, vdevice); vtarget->num_luns--; -- cgit v1.2.2 From 69b2e9b4431798645e3d8fb51413db97c9845db1 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:23:19 +0530 Subject: [SCSI] mptfusion: Task abort is not supported for Volumes 1) corrected return value as SUCCESS instead of 0. 2) Added check in mptscsih_abort. mptfusion do not support task abort for Volumes. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptscsih.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 90a1dff7eb84..7bd4c0fc23cc 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1723,6 +1723,7 @@ mptscsih_get_tm_timeout(MPT_ADAPTER *ioc) case FC: return 40; case SAS: + return 30; case SPI: default: return 10; @@ -1772,7 +1773,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) ioc->name, SCpnt)); SCpnt->result = DID_NO_CONNECT << 16; SCpnt->scsi_done(SCpnt); - retval = 0; + retval = SUCCESS; goto out; } @@ -1787,6 +1788,17 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) goto out; } + /* Task aborts are not supported for volumes. + */ + if (vdevice->vtarget->raidVolume) { + dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT + "task abort: raid volume (sc=%p)\n", + ioc->name, SCpnt)); + SCpnt->result = DID_RESET << 16; + retval = FAILED; + goto out; + } + /* Find this command */ if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(ioc, SCpnt)) < 0) { -- cgit v1.2.2 From 568da76929392c9feb60a25383250dd6cfa68e05 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:23:50 +0530 Subject: [SCSI] mptfusion: Check for command status is added after completion. 1) Corrected name string as "MPT SAS HOST" 2) Added proper check conditions for MPT_MGMT_STATUS_COMMAND_GOOD. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptsas.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 7f217445cd93..77f21e068da0 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -1894,7 +1894,7 @@ static struct scsi_host_template mptsas_driver_template = { .module = THIS_MODULE, .proc_name = "mptsas", .proc_info = mptscsih_proc_info, - .name = "MPT SPI Host", + .name = "MPT SAS Host", .info = mptscsih_info, .queuecommand = mptsas_qcmd, .target_alloc = mptsas_target_alloc, @@ -2038,11 +2038,13 @@ static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset) timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ); - if (!timeleft) { - /* On timeout reset the board */ + if (!(ioc->sas_mgmt.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { + error = -ETIME; mpt_free_msg_frame(ioc, mf); - mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); - error = -ETIMEDOUT; + if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET) + goto out_unlock; + if (!timeleft) + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); goto out_unlock; } @@ -2223,11 +2225,14 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf); timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ); - if (!timeleft) { - printk(MYIOC_s_ERR_FMT "%s: smp timeout!\n", ioc->name, __func__); - /* On timeout reset the board */ - mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); - ret = -ETIMEDOUT; + if (!(ioc->sas_mgmt.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { + ret = -ETIME; + mpt_free_msg_frame(ioc, mf); + mf = NULL; + if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_DID_IOCRESET) + goto unmap; + if (!timeleft) + mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP); goto unmap; } mf = NULL; @@ -4098,6 +4103,7 @@ mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id) cfg.pageAddr = (channel << 8) + id; cfg.cfghdr.hdr = &hdr; cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; + cfg.timeout = SAS_CONFIG_PAGE_TIMEOUT; if (mpt_config(ioc, &cfg) != 0) goto out; -- cgit v1.2.2 From f18a8927f6779f5dc9dc4327522c8a12f2cf31b9 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:24:20 +0530 Subject: [SCSI] mptfusion: Event data alignment with 4 byte. event_data needs to be 4 byte aligned to makes sure there is no unaligned memory access take place. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptsas.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/message/fusion/mptsas.h b/drivers/message/fusion/mptsas.h index 953c2bfcf6aa..7b249edbda78 100644 --- a/drivers/message/fusion/mptsas.h +++ b/drivers/message/fusion/mptsas.h @@ -110,7 +110,7 @@ struct fw_event_work { MPT_ADAPTER *ioc; u32 event; u8 retries; - u8 event_data[1]; + u8 __attribute__((aligned(4))) event_data[1]; }; struct mptsas_discovery_event { -- cgit v1.2.2 From 0cf0f23c286459625eb5cbf9934135ff3156ce95 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:24:57 +0530 Subject: [SCSI] mptfusion: Proper error handling is added after mpt_config timeout Added proper error handling after mpt_config. Now check of MPI_IOCSTATUS_CONFIG_INVALID_PAGE is added. If error is MPI_IOCSTATUS_CONFIG_INVALID_PAGE, driver will return -ENODEV. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptsas.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 77f21e068da0..ac000e83db0e 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -2523,6 +2523,12 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info, cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; error = mpt_config(ioc, &cfg); + + if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { + error = -ENODEV; + goto out_free_consistent; + } + if (error) goto out_free_consistent; @@ -2599,14 +2605,14 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info, cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; error = mpt_config(ioc, &cfg); - if (error) - goto out_free_consistent; - - if (!buffer->NumPhys) { + if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { error = -ENODEV; goto out_free_consistent; } + if (error) + goto out_free_consistent; + /* save config data */ port_info->num_phys = (buffer->NumPhys) ? buffer->NumPhys : 1; port_info->phy_info = kcalloc(port_info->num_phys, @@ -2682,7 +2688,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) { error = -ENODEV; - goto out; + goto out_free_consistent; } if (error) -- cgit v1.2.2 From 4f581b97314a2da96fa4d611ebfb586b2828b027 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 18 Mar 2010 19:26:02 +0530 Subject: [SCSI] mptfusion: Bump version 03.04.15 Upgrade version from 3.04.14 to 3.04.15 Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index e25dbfbb8fdf..b613eb3d4706 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -76,8 +76,8 @@ #define COPYRIGHT "Copyright (c) 1999-2008 " MODULEAUTHOR #endif -#define MPT_LINUX_VERSION_COMMON "3.04.14" -#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.14" +#define MPT_LINUX_VERSION_COMMON "3.04.15" +#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.15" #define WHAT_MAGIC_STRING "@" "(" "#" ")" #define show_mptmod_ver(s,ver) \ -- cgit v1.2.2 From 1821438a9b6a8454281ec2e151014709f641d2d5 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 18 Mar 2010 15:41:11 -0400 Subject: [SCSI] don't reap targets upon device_add failure This patch (as1358) fixes a bug in the error pathway of scsi_target_add(). If registration fails, the target should not be reaped. The reaping occurs later, when scanning is finished and all the child devices are removed. The current code leaves an unbalanced value in starget->reap_ref. Signed-off-by: Alan Stern Signed-off-by: James Bottomley --- drivers/scsi/scsi_sysfs.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 429c9b73e3e4..838a0db8ea1f 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -853,9 +853,6 @@ static int scsi_target_add(struct scsi_target *starget) error = device_add(&starget->dev); if (error) { dev_err(&starget->dev, "target device_add failed, error %d\n", error); - get_device(&starget->dev); - scsi_target_reap(starget); - put_device(&starget->dev); return error; } transport_add_device(&starget->dev); -- cgit v1.2.2 From 12fb8c1574d7d0c262d2f4c667047889c4f27ebe Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 18 Mar 2010 15:41:22 -0400 Subject: [SCSI] don't kfree an initialized struct device This patch (as1359) fixes a bug in scsi_alloc_target(). After a device structure has been initialized (and especially after its name has been set), it must not be freed directly. One has to call put_device() instead. Signed-off-by: Alan Stern Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 38518b088073..c992ecf4e372 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -459,8 +459,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, found_target->reap_ref++; spin_unlock_irqrestore(shost->host_lock, flags); if (found_target->state != STARGET_DEL) { - put_device(parent); - kfree(starget); + put_device(dev); return found_target; } /* Unfortunately, we found a dying target; need to -- cgit v1.2.2 From b504293fe9dc42917a919044f2b672fb361329d0 Mon Sep 17 00:00:00 2001 From: Jing Huang Date: Fri, 19 Mar 2010 11:05:39 -0700 Subject: [SCSI] bfa: add fc transport class based vport create/delete Use duplicate fc transport template for physical and vitual port. Add vport create/delete/disalbe functions in the transport template of physical port. Changes to make the vport create/delete function to work under this framework. Signed-off-by: Jing Huang Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfad.c | 10 +-- drivers/scsi/bfa/bfad_attr.c | 201 +++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/bfa/bfad_drv.h | 2 +- drivers/scsi/bfa/bfad_im.c | 53 ++++++------ drivers/scsi/bfa/bfad_im.h | 6 +- 5 files changed, 239 insertions(+), 33 deletions(-) diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c index 13f5feb308c2..3a5163d3675d 100644 --- a/drivers/scsi/bfa/bfad.c +++ b/drivers/scsi/bfa/bfad.c @@ -299,8 +299,6 @@ bfa_fcb_vport_delete(struct bfad_vport_s *vport_drv) complete(vport_drv->comp_del); return; } - - kfree(vport_drv); } /** @@ -483,7 +481,7 @@ ext: */ bfa_status_t bfad_vport_create(struct bfad_s *bfad, u16 vf_id, - struct bfa_port_cfg_s *port_cfg) + struct bfa_port_cfg_s *port_cfg, struct device *dev) { struct bfad_vport_s *vport; int rc = BFA_STATUS_OK; @@ -506,7 +504,8 @@ bfad_vport_create(struct bfad_s *bfad, u16 vf_id, goto ext_free_vport; if (port_cfg->roles & BFA_PORT_ROLE_FCP_IM) { - rc = bfad_im_scsi_host_alloc(bfad, vport->drv_port.im_port); + rc = bfad_im_scsi_host_alloc(bfad, vport->drv_port.im_port, + dev); if (rc != BFA_STATUS_OK) goto ext_free_fcs_vport; } @@ -848,7 +847,8 @@ bfad_cfg_pport(struct bfad_s *bfad, enum bfa_port_role role) goto out; } - rc = bfad_im_scsi_host_alloc(bfad, bfad->pport.im_port); + rc = bfad_im_scsi_host_alloc(bfad, bfad->pport.im_port, + &bfad->pcidev->dev); if (rc != BFA_STATUS_OK) goto out; diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c index 6a2efdd5ef24..e477bfbfa7d8 100644 --- a/drivers/scsi/bfa/bfad_attr.c +++ b/drivers/scsi/bfa/bfad_attr.c @@ -364,6 +364,152 @@ bfad_im_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout) } +static int +bfad_im_vport_create(struct fc_vport *fc_vport, bool disable) +{ + char *vname = fc_vport->symbolic_name; + struct Scsi_Host *shost = fc_vport->shost; + struct bfad_im_port_s *im_port = + (struct bfad_im_port_s *) shost->hostdata[0]; + struct bfad_s *bfad = im_port->bfad; + struct bfa_port_cfg_s port_cfg; + int status = 0, rc; + unsigned long flags; + + memset(&port_cfg, 0, sizeof(port_cfg)); + + port_cfg.pwwn = wwn_to_u64((u8 *) &fc_vport->port_name); + port_cfg.nwwn = wwn_to_u64((u8 *) &fc_vport->node_name); + + if (strlen(vname) > 0) + strcpy((char *)&port_cfg.sym_name, vname); + + port_cfg.roles = BFA_PORT_ROLE_FCP_IM; + rc = bfad_vport_create(bfad, 0, &port_cfg, &fc_vport->dev); + + if (rc == BFA_STATUS_OK) { + struct bfad_vport_s *vport; + struct bfa_fcs_vport_s *fcs_vport; + struct Scsi_Host *vshost; + + spin_lock_irqsave(&bfad->bfad_lock, flags); + fcs_vport = bfa_fcs_vport_lookup(&bfad->bfa_fcs, 0, + port_cfg.pwwn); + if (fcs_vport == NULL) { + spin_unlock_irqrestore(&bfad->bfad_lock, flags); + return VPCERR_BAD_WWN; + } + + fc_vport_set_state(fc_vport, FC_VPORT_ACTIVE); + if (disable) { + bfa_fcs_vport_stop(fcs_vport); + fc_vport_set_state(fc_vport, FC_VPORT_DISABLED); + } + spin_unlock_irqrestore(&bfad->bfad_lock, flags); + + vport = fcs_vport->vport_drv; + vshost = vport->drv_port.im_port->shost; + fc_host_node_name(vshost) = wwn_to_u64((u8 *) &port_cfg.nwwn); + fc_host_port_name(vshost) = wwn_to_u64((u8 *) &port_cfg.pwwn); + fc_vport->dd_data = vport; + vport->drv_port.im_port->fc_vport = fc_vport; + + } else if (rc == BFA_STATUS_INVALID_WWN) + return VPCERR_BAD_WWN; + else if (rc == BFA_STATUS_VPORT_EXISTS) + return VPCERR_BAD_WWN; + else if (rc == BFA_STATUS_VPORT_MAX) + return VPCERR_NO_FABRIC_SUPP; + else if (rc == BFA_STATUS_VPORT_WWN_BP) + return VPCERR_BAD_WWN; + else + return FC_VPORT_FAILED; + + return status; +} + +static int +bfad_im_vport_delete(struct fc_vport *fc_vport) +{ + struct bfad_vport_s *vport = (struct bfad_vport_s *)fc_vport->dd_data; + struct bfad_im_port_s *im_port = + (struct bfad_im_port_s *) vport->drv_port.im_port; + struct bfad_s *bfad = im_port->bfad; + struct bfad_port_s *port; + struct bfa_fcs_vport_s *fcs_vport; + struct Scsi_Host *vshost; + wwn_t pwwn; + int rc; + unsigned long flags; + struct completion fcomp; + + if (im_port->flags & BFAD_PORT_DELETE) + goto free_scsi_host; + + port = im_port->port; + + vshost = vport->drv_port.im_port->shost; + pwwn = wwn_to_u64((u8 *) &fc_host_port_name(vshost)); + + spin_lock_irqsave(&bfad->bfad_lock, flags); + fcs_vport = bfa_fcs_vport_lookup(&bfad->bfa_fcs, 0, pwwn); + spin_unlock_irqrestore(&bfad->bfad_lock, flags); + + if (fcs_vport == NULL) + return VPCERR_BAD_WWN; + + vport->drv_port.flags |= BFAD_PORT_DELETE; + + vport->comp_del = &fcomp; + init_completion(vport->comp_del); + + spin_lock_irqsave(&bfad->bfad_lock, flags); + rc = bfa_fcs_vport_delete(&vport->fcs_vport); + spin_unlock_irqrestore(&bfad->bfad_lock, flags); + + wait_for_completion(vport->comp_del); + +free_scsi_host: + bfad_os_scsi_host_free(bfad, im_port); + + kfree(vport); + + return 0; +} + +static int +bfad_im_vport_disable(struct fc_vport *fc_vport, bool disable) +{ + struct bfad_vport_s *vport; + struct bfad_s *bfad; + struct bfa_fcs_vport_s *fcs_vport; + struct Scsi_Host *vshost; + wwn_t pwwn; + unsigned long flags; + + vport = (struct bfad_vport_s *)fc_vport->dd_data; + bfad = vport->drv_port.bfad; + vshost = vport->drv_port.im_port->shost; + pwwn = wwn_to_u64((u8 *) &fc_vport->port_name); + + spin_lock_irqsave(&bfad->bfad_lock, flags); + fcs_vport = bfa_fcs_vport_lookup(&bfad->bfa_fcs, 0, pwwn); + spin_unlock_irqrestore(&bfad->bfad_lock, flags); + + if (fcs_vport == NULL) + return VPCERR_BAD_WWN; + + if (disable) { + bfa_fcs_vport_stop(fcs_vport); + fc_vport_set_state(fc_vport, FC_VPORT_DISABLED); + } else { + bfa_fcs_vport_start(fcs_vport); + fc_vport_set_state(fc_vport, FC_VPORT_ACTIVE); + } + + return 0; +} + struct fc_function_template bfad_im_fc_function_template = { /* Target dynamic attributes */ @@ -413,6 +559,61 @@ struct fc_function_template bfad_im_fc_function_template = { .show_rport_dev_loss_tmo = 1, .get_rport_dev_loss_tmo = bfad_im_get_rport_loss_tmo, .set_rport_dev_loss_tmo = bfad_im_set_rport_loss_tmo, + + .vport_create = bfad_im_vport_create, + .vport_delete = bfad_im_vport_delete, + .vport_disable = bfad_im_vport_disable, +}; + +struct fc_function_template bfad_im_vport_fc_function_template = { + + /* Target dynamic attributes */ + .get_starget_port_id = bfad_im_get_starget_port_id, + .show_starget_port_id = 1, + .get_starget_node_name = bfad_im_get_starget_node_name, + .show_starget_node_name = 1, + .get_starget_port_name = bfad_im_get_starget_port_name, + .show_starget_port_name = 1, + + /* Host dynamic attribute */ + .get_host_port_id = bfad_im_get_host_port_id, + .show_host_port_id = 1, + + /* Host fixed attributes */ + .show_host_node_name = 1, + .show_host_port_name = 1, + .show_host_supported_classes = 1, + .show_host_supported_fc4s = 1, + .show_host_supported_speeds = 1, + .show_host_maxframe_size = 1, + + /* More host dynamic attributes */ + .show_host_port_type = 1, + .get_host_port_type = bfad_im_get_host_port_type, + .show_host_port_state = 1, + .get_host_port_state = bfad_im_get_host_port_state, + .show_host_active_fc4s = 1, + .get_host_active_fc4s = bfad_im_get_host_active_fc4s, + .show_host_speed = 1, + .get_host_speed = bfad_im_get_host_speed, + .show_host_fabric_name = 1, + .get_host_fabric_name = bfad_im_get_host_fabric_name, + + .show_host_symbolic_name = 1, + + /* Statistics */ + .get_fc_host_stats = bfad_im_get_stats, + .reset_fc_host_stats = bfad_im_reset_stats, + + /* Allocation length for host specific data */ + .dd_fcrport_size = sizeof(struct bfad_itnim_data_s *), + + /* Remote port fixed attributes */ + .show_rport_maxframe_size = 1, + .show_rport_supported_classes = 1, + .show_rport_dev_loss_tmo = 1, + .get_rport_dev_loss_tmo = bfad_im_get_rport_loss_tmo, + .set_rport_dev_loss_tmo = bfad_im_set_rport_loss_tmo, }; /** diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h index 107848cd3b6d..f4b14396c4ac 100644 --- a/drivers/scsi/bfa/bfad_drv.h +++ b/drivers/scsi/bfa/bfad_drv.h @@ -254,7 +254,7 @@ do { \ bfa_status_t bfad_vport_create(struct bfad_s *bfad, u16 vf_id, - struct bfa_port_cfg_s *port_cfg); + struct bfa_port_cfg_s *port_cfg, struct device *dev); bfa_status_t bfad_vf_create(struct bfad_s *bfad, u16 vf_id, struct bfa_port_cfg_s *port_cfg); bfa_status_t bfad_cfg_pport(struct bfad_s *bfad, enum bfa_port_role role); diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c index e2c70de2dba5..f263891b8cc6 100644 --- a/drivers/scsi/bfa/bfad_im.c +++ b/drivers/scsi/bfa/bfad_im.c @@ -30,6 +30,7 @@ BFA_TRC_FILE(LDRV, IM); DEFINE_IDR(bfad_im_port_index); struct scsi_transport_template *bfad_im_scsi_transport_template; +struct scsi_transport_template *bfad_im_scsi_vport_transport_template; static void bfad_im_itnim_work_handler(struct work_struct *work); static int bfad_im_queuecommand(struct scsi_cmnd *cmnd, void (*done)(struct scsi_cmnd *)); @@ -512,7 +513,8 @@ void bfa_fcb_itnim_tov(struct bfad_itnim_s *itnim) * Allocate a Scsi_Host for a port. */ int -bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port) +bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port, + struct device *dev) { int error = 1; @@ -541,12 +543,15 @@ bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port) im_port->shost->max_lun = MAX_FCP_LUN; im_port->shost->max_cmd_len = 16; im_port->shost->can_queue = bfad->cfg_data.ioc_queue_depth; - im_port->shost->transportt = bfad_im_scsi_transport_template; + if (im_port->port->pvb_type == BFAD_PORT_PHYS_BASE) + im_port->shost->transportt = bfad_im_scsi_transport_template; + else + im_port->shost->transportt = + bfad_im_scsi_vport_transport_template; - error = bfad_os_scsi_add_host(im_port->shost, im_port, bfad); + error = scsi_add_host(im_port->shost, dev); if (error) { - printk(KERN_WARNING "bfad_os_scsi_add_host failure %d\n", - error); + printk(KERN_WARNING "scsi_add_host failure %d\n", error); goto out_fc_rel; } @@ -588,9 +593,11 @@ bfad_im_port_delete_handler(struct work_struct *work) struct bfad_im_port_s *im_port = container_of(work, struct bfad_im_port_s, port_delete_work); - bfad_im_scsi_host_free(im_port->bfad, im_port); - bfad_im_port_clean(im_port); - kfree(im_port); + if (im_port->port->pvb_type != BFAD_PORT_PHYS_BASE) { + im_port->flags |= BFAD_PORT_DELETE; + fc_vport_terminate(im_port->fc_vport); + } + } bfa_status_t @@ -689,23 +696,6 @@ bfad_im_probe_undo(struct bfad_s *bfad) } } - - - -int -bfad_os_scsi_add_host(struct Scsi_Host *shost, struct bfad_im_port_s *im_port, - struct bfad_s *bfad) -{ - struct device *dev; - - if (im_port->port->pvb_type == BFAD_PORT_PHYS_BASE) - dev = &bfad->pcidev->dev; - else - dev = &bfad->pport.im_port->shost->shost_gendev; - - return scsi_add_host(shost, dev); -} - struct Scsi_Host * bfad_os_scsi_host_alloc(struct bfad_im_port_s *im_port, struct bfad_s *bfad) { @@ -724,7 +714,8 @@ bfad_os_scsi_host_alloc(struct bfad_im_port_s *im_port, struct bfad_s *bfad) void bfad_os_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port) { - flush_workqueue(bfad->im->drv_workq); + if (!(im_port->flags & BFAD_PORT_DELETE)) + flush_workqueue(bfad->im->drv_workq); bfad_im_scsi_host_free(im_port->bfad, im_port); bfad_im_port_clean(im_port); kfree(im_port); @@ -829,6 +820,13 @@ bfad_im_module_init(void) if (!bfad_im_scsi_transport_template) return BFA_STATUS_ENOMEM; + bfad_im_scsi_vport_transport_template = + fc_attach_transport(&bfad_im_vport_fc_function_template); + if (!bfad_im_scsi_vport_transport_template) { + fc_release_transport(bfad_im_scsi_transport_template); + return BFA_STATUS_ENOMEM; + } + return BFA_STATUS_OK; } @@ -837,6 +835,8 @@ bfad_im_module_exit(void) { if (bfad_im_scsi_transport_template) fc_release_transport(bfad_im_scsi_transport_template); + if (bfad_im_scsi_vport_transport_template) + fc_release_transport(bfad_im_scsi_vport_transport_template); } void @@ -937,6 +937,7 @@ bfad_os_fc_host_init(struct bfad_im_port_s *im_port) bfa_os_htonll((bfa_fcs_port_get_nwwn(port->fcs_port))); fc_host_port_name(host) = bfa_os_htonll((bfa_fcs_port_get_pwwn(port->fcs_port))); + fc_host_max_npiv_vports(host) = bfa_lps_get_max_vport(&bfad->bfa); fc_host_supported_classes(host) = FC_COS_CLASS3; diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h index 85ab2da21321..973cab4d09c7 100644 --- a/drivers/scsi/bfa/bfad_im.h +++ b/drivers/scsi/bfa/bfad_im.h @@ -34,7 +34,7 @@ void bfad_im_port_online(struct bfad_s *bfad, struct bfad_port_s *port); void bfad_im_port_offline(struct bfad_s *bfad, struct bfad_port_s *port); void bfad_im_port_clean(struct bfad_im_port_s *im_port); int bfad_im_scsi_host_alloc(struct bfad_s *bfad, - struct bfad_im_port_s *im_port); + struct bfad_im_port_s *im_port, struct device *dev); void bfad_im_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port); @@ -64,9 +64,11 @@ struct bfad_im_port_s { struct work_struct port_delete_work; int idr_id; u16 cur_scsi_id; + u16 flags; struct list_head binding_list; struct Scsi_Host *shost; struct list_head itnim_mapped_list; + struct fc_vport *fc_vport; }; enum bfad_itnim_state { @@ -140,6 +142,8 @@ void bfad_im_itnim_unmap(struct bfad_im_port_s *im_port, extern struct scsi_host_template bfad_im_scsi_host_template; extern struct scsi_host_template bfad_im_vport_template; extern struct fc_function_template bfad_im_fc_function_template; +extern struct fc_function_template bfad_im_vport_fc_function_template; extern struct scsi_transport_template *bfad_im_scsi_transport_template; +extern struct scsi_transport_template *bfad_im_scsi_vport_transport_template; #endif -- cgit v1.2.2 From 2eba0d4c000777ce43012d7fda806b075f6cf877 Mon Sep 17 00:00:00 2001 From: Jing Huang Date: Fri, 19 Mar 2010 11:06:05 -0700 Subject: [SCSI] bfa: fix the issue of not handling scsi_cmnd sg chaining case Currently the driver doesn't take into consideraion of possible sg chaining when it walks through the sg list. This is fixed by using the sg_next() which automatically handles the chaining case. Obosolete code is removed as a result of this change. Signed-off-by: Jing Huang Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfa_cb_ioim_macros.h | 29 ----------------------------- drivers/scsi/bfa/bfa_ioim.c | 22 +++++++++++++++++----- 2 files changed, 17 insertions(+), 34 deletions(-) diff --git a/drivers/scsi/bfa/bfa_cb_ioim_macros.h b/drivers/scsi/bfa/bfa_cb_ioim_macros.h index 961fe439daad..53a616f5f50d 100644 --- a/drivers/scsi/bfa/bfa_cb_ioim_macros.h +++ b/drivers/scsi/bfa/bfa_cb_ioim_macros.h @@ -116,35 +116,6 @@ bfa_cb_ioim_get_timeout(struct bfad_ioim_s *dio) return 0; } -/** - * Get SG element for the I/O request given the SG element index - */ -static inline union bfi_addr_u -bfa_cb_ioim_get_sgaddr(struct bfad_ioim_s *dio, int sgeid) -{ - struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio; - struct scatterlist *sge; - u64 addr; - - sge = (struct scatterlist *)scsi_sglist(cmnd) + sgeid; - addr = (u64) sg_dma_address(sge); - - return *((union bfi_addr_u *) &addr); -} - -static inline u32 -bfa_cb_ioim_get_sglen(struct bfad_ioim_s *dio, int sgeid) -{ - struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio; - struct scatterlist *sge; - u32 len; - - sge = (struct scatterlist *)scsi_sglist(cmnd) + sgeid; - len = sg_dma_len(sge); - - return len; -} - /** * Get Command Reference Number for the I/O request. 0 if none. */ diff --git a/drivers/scsi/bfa/bfa_ioim.c b/drivers/scsi/bfa/bfa_ioim.c index 5b107abe46e5..8a1be201d29b 100644 --- a/drivers/scsi/bfa/bfa_ioim.c +++ b/drivers/scsi/bfa/bfa_ioim.c @@ -731,6 +731,9 @@ bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim) static struct fcp_cmnd_s cmnd_z0 = { 0 }; struct bfi_sge_s *sge; u32 pgdlen = 0; + u64 addr; + struct scatterlist *sg; + struct scsi_cmnd *cmnd = (struct scsi_cmnd *) ioim->dio; /** * check for room in queue to send request now @@ -754,8 +757,10 @@ bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim) */ sge = &m->sges[0]; if (ioim->nsges) { - sge->sga = bfa_cb_ioim_get_sgaddr(ioim->dio, 0); - pgdlen = bfa_cb_ioim_get_sglen(ioim->dio, 0); + sg = (struct scatterlist *)scsi_sglist(cmnd); + addr = (u64) sg_dma_address(sg); + sge->sga = *(union bfi_addr_u *) &addr; + pgdlen = sg_dma_len(sg); sge->sg_len = pgdlen; sge->flags = (ioim->nsges > BFI_SGE_INLINE) ? BFI_SGE_DATA_CPL : BFI_SGE_DATA_LAST; @@ -868,10 +873,16 @@ bfa_ioim_sgpg_setup(struct bfa_ioim_s *ioim) struct bfi_sge_s *sge; struct bfa_sgpg_s *sgpg; u32 pgcumsz; + u64 addr; + struct scatterlist *sg; + struct scsi_cmnd *cmnd = (struct scsi_cmnd *) ioim->dio; sgeid = BFI_SGE_INLINE; ioim->sgpg = sgpg = bfa_q_first(&ioim->sgpg_q); + sg = scsi_sglist(cmnd); + sg = sg_next(sg); + do { sge = sgpg->sgpg->sges; nsges = ioim->nsges - sgeid; @@ -879,9 +890,10 @@ bfa_ioim_sgpg_setup(struct bfa_ioim_s *ioim) nsges = BFI_SGPG_DATA_SGES; pgcumsz = 0; - for (i = 0; i < nsges; i++, sge++, sgeid++) { - sge->sga = bfa_cb_ioim_get_sgaddr(ioim->dio, sgeid); - sge->sg_len = bfa_cb_ioim_get_sglen(ioim->dio, sgeid); + for (i = 0; i < nsges; i++, sge++, sgeid++, sg = sg_next(sg)) { + addr = (u64) sg_dma_address(sg); + sge->sga = *(union bfi_addr_u *) &addr; + sge->sg_len = sg_dma_len(sg); pgcumsz += sge->sg_len; /** -- cgit v1.2.2 From b3522f08ec7011aed0abc477bfedd00d189e9cd6 Mon Sep 17 00:00:00 2001 From: Jing Huang Date: Fri, 19 Mar 2010 11:06:44 -0700 Subject: [SCSI] bfa: use pci_iomap() and pci_iounmap() Use pci_iomap() and pci_iounmap() to simplify the code. Remove uncessary #ifdef check for ia64 (it was added as a workaound for some RHEL 5.x release which doesn't export iounmap function) Signed-off-by: Jing Huang Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfad.c | 9 +-------- drivers/scsi/bfa/bfad_drv.h | 1 - 2 files changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c index 3a5163d3675d..0baeabadb5b2 100644 --- a/drivers/scsi/bfa/bfad.c +++ b/drivers/scsi/bfa/bfad.c @@ -590,7 +590,6 @@ bfad_init_timer(struct bfad_s *bfad) int bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad) { - unsigned long bar0_len; int rc = -ENODEV; if (pci_enable_device(pdev)) { @@ -610,9 +609,7 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad) goto out_release_region; } - bfad->pci_bar0_map = pci_resource_start(pdev, 0); - bar0_len = pci_resource_len(pdev, 0); - bfad->pci_bar0_kva = ioremap(bfad->pci_bar0_map, bar0_len); + bfad->pci_bar0_kva = pci_iomap(pdev, 0, pci_resource_len(pdev, 0)); if (bfad->pci_bar0_kva == NULL) { BFA_PRINTF(BFA_ERR, "Fail to map bar0\n"); @@ -645,11 +642,7 @@ out: void bfad_pci_uninit(struct pci_dev *pdev, struct bfad_s *bfad) { -#if defined(__ia64__) pci_iounmap(pdev, bfad->pci_bar0_kva); -#else - iounmap(bfad->pci_bar0_kva); -#endif pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h index f4b14396c4ac..0639aedcb610 100644 --- a/drivers/scsi/bfa/bfad_drv.h +++ b/drivers/scsi/bfa/bfad_drv.h @@ -162,7 +162,6 @@ struct bfad_s { const char *pci_name; struct bfa_pcidev_s hal_pcidev; struct bfa_ioc_pci_attr_s pci_attr; - unsigned long pci_bar0_map; void __iomem *pci_bar0_kva; struct completion comp; struct completion suspend; -- cgit v1.2.2 From 42b426ecb453cf49c3d16cf1d7a5e5d8cab9869d Mon Sep 17 00:00:00 2001 From: Jing Huang Date: Fri, 19 Mar 2010 11:07:09 -0700 Subject: [SCSI] bfa: protect idr using bfad_mutex idr is a global resource, protect it with global bfad_mutex. Signed-off-by: Jing Huang Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfad.c | 2 +- drivers/scsi/bfa/bfad_drv.h | 1 + drivers/scsi/bfa/bfad_im.c | 13 +++++++++---- 3 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c index 0baeabadb5b2..d4fc4287ebd3 100644 --- a/drivers/scsi/bfa/bfad.c +++ b/drivers/scsi/bfa/bfad.c @@ -33,7 +33,7 @@ #include BFA_TRC_FILE(LDRV, BFAD); -static DEFINE_MUTEX(bfad_mutex); +DEFINE_MUTEX(bfad_mutex); LIST_HEAD(bfad_list); static int bfad_inst; int bfad_supported_fc4s; diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h index 0639aedcb610..6c920c1b53a4 100644 --- a/drivers/scsi/bfa/bfad_drv.h +++ b/drivers/scsi/bfa/bfad_drv.h @@ -293,5 +293,6 @@ extern struct list_head bfad_list; extern int bfa_lun_queue_depth; extern int bfad_supported_fc4s; extern int bfa_linkup_delay; +extern struct mutex bfad_mutex; #endif /* __BFAD_DRV_H__ */ diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c index f263891b8cc6..5b7cf539e50b 100644 --- a/drivers/scsi/bfa/bfad_im.c +++ b/drivers/scsi/bfa/bfad_im.c @@ -518,7 +518,9 @@ bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port, { int error = 1; + mutex_lock(&bfad_mutex); if (!idr_pre_get(&bfad_im_port_index, GFP_KERNEL)) { + mutex_unlock(&bfad_mutex); printk(KERN_WARNING "idr_pre_get failure\n"); goto out; } @@ -526,10 +528,13 @@ bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port, error = idr_get_new(&bfad_im_port_index, im_port, &im_port->idr_id); if (error) { + mutex_unlock(&bfad_mutex); printk(KERN_WARNING "idr_get_new failure\n"); goto out; } + mutex_unlock(&bfad_mutex); + im_port->shost = bfad_os_scsi_host_alloc(im_port, bfad); if (!im_port->shost) { error = 1; @@ -563,7 +568,9 @@ bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port, out_fc_rel: scsi_host_put(im_port->shost); out_free_idr: + mutex_lock(&bfad_mutex); idr_remove(&bfad_im_port_index, im_port->idr_id); + mutex_unlock(&bfad_mutex); out: return error; } @@ -571,8 +578,6 @@ out: void bfad_im_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port) { - unsigned long flags; - bfa_trc(bfad, bfad->inst_no); bfa_log(bfad->logmod, BFA_LOG_LINUX_SCSI_HOST_FREE, im_port->shost->host_no); @@ -582,9 +587,9 @@ bfad_im_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port) scsi_remove_host(im_port->shost); scsi_host_put(im_port->shost); - spin_lock_irqsave(&bfad->bfad_lock, flags); + mutex_lock(&bfad_mutex); idr_remove(&bfad_im_port_index, im_port->idr_id); - spin_unlock_irqrestore(&bfad->bfad_lock, flags); + mutex_unlock(&bfad_mutex); } static void -- cgit v1.2.2 From 077424e2e2c97c830d903891dfcd1532068b85b7 Mon Sep 17 00:00:00 2001 From: Jing Huang Date: Fri, 19 Mar 2010 11:07:36 -0700 Subject: [SCSI] bfa: sg addr big endian fix sg address in IO request is not set up correctly for big endian platform. add new macros to properly swap the address. Signed-off-by: Jing Huang Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfa_ioim.c | 4 ++-- drivers/scsi/bfa/bfa_os_inc.h | 15 +++++++++++++++ 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/bfa/bfa_ioim.c b/drivers/scsi/bfa/bfa_ioim.c index 8a1be201d29b..687f3d6e252b 100644 --- a/drivers/scsi/bfa/bfa_ioim.c +++ b/drivers/scsi/bfa/bfa_ioim.c @@ -758,7 +758,7 @@ bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim) sge = &m->sges[0]; if (ioim->nsges) { sg = (struct scatterlist *)scsi_sglist(cmnd); - addr = (u64) sg_dma_address(sg); + addr = bfa_os_sgaddr(sg_dma_address(sg)); sge->sga = *(union bfi_addr_u *) &addr; pgdlen = sg_dma_len(sg); sge->sg_len = pgdlen; @@ -891,7 +891,7 @@ bfa_ioim_sgpg_setup(struct bfa_ioim_s *ioim) pgcumsz = 0; for (i = 0; i < nsges; i++, sge++, sgeid++, sg = sg_next(sg)) { - addr = (u64) sg_dma_address(sg); + addr = bfa_os_sgaddr(sg_dma_address(sg)); sge->sga = *(union bfi_addr_u *) &addr; sge->sg_len = sg_dma_len(sg); pgcumsz += sge->sg_len; diff --git a/drivers/scsi/bfa/bfa_os_inc.h b/drivers/scsi/bfa/bfa_os_inc.h index 10a89f75fa94..4eb1330d5b30 100644 --- a/drivers/scsi/bfa/bfa_os_inc.h +++ b/drivers/scsi/bfa/bfa_os_inc.h @@ -50,6 +50,10 @@ #include #include +#ifdef __BIG_ENDIAN +#define __BIGENDIAN +#endif + #define BFA_ERR KERN_ERR #define BFA_WARNING KERN_WARNING #define BFA_NOTICE KERN_NOTICE @@ -123,6 +127,15 @@ int bfa_os_MWB(void *); (((_x) & 0x00ff0000) >> 8) | \ (((_x) & 0xff000000) >> 24)) +#define bfa_os_swap_sgaddr(_x) ((u64)( \ + (((u64)(_x) & (u64)0x00000000000000ffull) << 32) | \ + (((u64)(_x) & (u64)0x000000000000ff00ull) << 32) | \ + (((u64)(_x) & (u64)0x0000000000ff0000ull) << 32) | \ + (((u64)(_x) & (u64)0x00000000ff000000ull) << 32) | \ + (((u64)(_x) & (u64)0x000000ff00000000ull) >> 32) | \ + (((u64)(_x) & (u64)0x0000ff0000000000ull) >> 32) | \ + (((u64)(_x) & (u64)0x00ff000000000000ull) >> 32) | \ + (((u64)(_x) & (u64)0xff00000000000000ull) >> 32))) #ifndef __BIGENDIAN #define bfa_os_htons(_x) ((u16)((((_x) & 0xff00) >> 8) | \ @@ -133,6 +146,7 @@ int bfa_os_MWB(void *); #define bfa_os_hton3b(_x) bfa_swap_3b(_x) #define bfa_os_wtole(_x) (_x) +#define bfa_os_sgaddr(_x) (_x) #else @@ -141,6 +155,7 @@ int bfa_os_MWB(void *); #define bfa_os_hton3b(_x) (_x) #define bfa_os_htonll(_x) (_x) #define bfa_os_wtole(_x) bfa_os_swap32(_x) +#define bfa_os_sgaddr(_x) bfa_os_swap_sgaddr(_x) #endif -- cgit v1.2.2 From 6e98016ca077c5c751167bfdb1a3a2a3bee581cf Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Fri, 19 Mar 2010 17:03:58 -0700 Subject: [SCSI] qla2xxx: Re-organized BSG interface specific code. 1. Segregate BSG interface specific code to new files. 2. Handle multiple vendor specific commands indepedently. 3. Reorganised support for reset, management and update FCoE firmware commands. 4. Fixed memory leak issue in Loopback. 5. Added new vendor command to support iiDMA using BSG interface. 6. Proper cleanup of dma mapped and dma allocated buffers for BSG request. [jejb: fix up conflict and merge in Jiri Slaby lock imbalance patch] Signed-off-by: Stephen Rothwell Signed-off-by: Harish Zunjarrao Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/Makefile | 2 +- drivers/scsi/qla2xxx/qla_attr.c | 702 +------------------------- drivers/scsi/qla2xxx/qla_bsg.c | 1040 +++++++++++++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_bsg.h | 135 +++++ drivers/scsi/qla2xxx/qla_def.h | 125 +---- drivers/scsi/qla2xxx/qla_gbl.h | 8 + drivers/scsi/qla2xxx/qla_mbx.c | 49 +- 7 files changed, 1230 insertions(+), 831 deletions(-) create mode 100644 drivers/scsi/qla2xxx/qla_bsg.c create mode 100644 drivers/scsi/qla2xxx/qla_bsg.h diff --git a/drivers/scsi/qla2xxx/Makefile b/drivers/scsi/qla2xxx/Makefile index c51fd1f86639..1014db6f9928 100644 --- a/drivers/scsi/qla2xxx/Makefile +++ b/drivers/scsi/qla2xxx/Makefile @@ -1,4 +1,4 @@ qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \ - qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_dfs.o + qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_dfs.o qla_bsg.o obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx.o diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 1c7ef55966fb..90bf7ad42f67 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -12,9 +12,7 @@ #include static int qla24xx_vport_disable(struct fc_vport *, bool); -static int qla84xx_reset(scsi_qla_host_t *, struct msg_echo_lb *, struct fc_bsg_job *); -int qla84xx_reset_chip(scsi_qla_host_t *, uint16_t, uint16_t *); -static int qla84xx_mgmt_cmd(scsi_qla_host_t *, struct msg_echo_lb *, struct fc_bsg_job *); + /* SYSFS attributes --------------------------------------------------------- */ static ssize_t @@ -1825,582 +1823,6 @@ qla24xx_vport_disable(struct fc_vport *fc_vport, bool disable) return 0; } -/* BSG support for ELS/CT pass through */ -inline srb_t * -qla2x00_get_ctx_bsg_sp(scsi_qla_host_t *vha, fc_port_t *fcport, size_t size) -{ - srb_t *sp; - struct qla_hw_data *ha = vha->hw; - struct srb_bsg_ctx *ctx; - - sp = mempool_alloc(ha->srb_mempool, GFP_KERNEL); - if (!sp) - goto done; - ctx = kzalloc(size, GFP_KERNEL); - if (!ctx) { - mempool_free(sp, ha->srb_mempool); - goto done; - } - - memset(sp, 0, sizeof(*sp)); - sp->fcport = fcport; - sp->ctx = ctx; -done: - return sp; -} - -static int -qla2x00_process_els(struct fc_bsg_job *bsg_job) -{ - struct fc_rport *rport; - fc_port_t *fcport; - struct Scsi_Host *host; - scsi_qla_host_t *vha; - struct qla_hw_data *ha; - srb_t *sp; - const char *type; - int req_sg_cnt, rsp_sg_cnt; - int rval = (DRIVER_ERROR << 16); - uint16_t nextlid = 0; - struct srb_bsg *els; - - /* Multiple SG's are not supported for ELS requests */ - if (bsg_job->request_payload.sg_cnt > 1 || - bsg_job->reply_payload.sg_cnt > 1) { - DEBUG2(printk(KERN_INFO - "multiple SG's are not supported for ELS requests" - " [request_sg_cnt: %x reply_sg_cnt: %x]\n", - bsg_job->request_payload.sg_cnt, - bsg_job->reply_payload.sg_cnt)); - rval = -EPERM; - goto done; - } - - /* ELS request for rport */ - if (bsg_job->request->msgcode == FC_BSG_RPT_ELS) { - rport = bsg_job->rport; - fcport = *(fc_port_t **) rport->dd_data; - host = rport_to_shost(rport); - vha = shost_priv(host); - ha = vha->hw; - type = "FC_BSG_RPT_ELS"; - - /* make sure the rport is logged in, - * if not perform fabric login - */ - if (qla2x00_fabric_login(vha, fcport, &nextlid)) { - DEBUG2(qla_printk(KERN_WARNING, ha, - "failed to login port %06X for ELS passthru\n", - fcport->d_id.b24)); - rval = -EIO; - goto done; - } - } else { - host = bsg_job->shost; - vha = shost_priv(host); - ha = vha->hw; - type = "FC_BSG_HST_ELS_NOLOGIN"; - - /* Allocate a dummy fcport structure, since functions - * preparing the IOCB and mailbox command retrieves port - * specific information from fcport structure. For Host based - * ELS commands there will be no fcport structure allocated - */ - fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); - if (!fcport) { - rval = -ENOMEM; - goto done; - } - - /* Initialize all required fields of fcport */ - fcport->vha = vha; - fcport->vp_idx = vha->vp_idx; - fcport->d_id.b.al_pa = - bsg_job->request->rqst_data.h_els.port_id[0]; - fcport->d_id.b.area = - bsg_job->request->rqst_data.h_els.port_id[1]; - fcport->d_id.b.domain = - bsg_job->request->rqst_data.h_els.port_id[2]; - fcport->loop_id = - (fcport->d_id.b.al_pa == 0xFD) ? - NPH_FABRIC_CONTROLLER : NPH_F_PORT; - } - - if (!vha->flags.online) { - DEBUG2(qla_printk(KERN_WARNING, ha, - "host not online\n")); - rval = -EIO; - goto done; - } - - req_sg_cnt = - dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, - bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); - if (!req_sg_cnt) { - rval = -ENOMEM; - goto done_free_fcport; - } - rsp_sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, - bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); - if (!rsp_sg_cnt) { - rval = -ENOMEM; - goto done_free_fcport; - } - - if ((req_sg_cnt != bsg_job->request_payload.sg_cnt) || - (rsp_sg_cnt != bsg_job->reply_payload.sg_cnt)) - { - DEBUG2(printk(KERN_INFO - "dma mapping resulted in different sg counts \ - [request_sg_cnt: %x dma_request_sg_cnt: %x\ - reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n", - bsg_job->request_payload.sg_cnt, req_sg_cnt, - bsg_job->reply_payload.sg_cnt, rsp_sg_cnt)); - rval = -EAGAIN; - goto done_unmap_sg; - } - - /* Alloc SRB structure */ - sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_bsg)); - if (!sp) { - rval = -ENOMEM; - goto done_unmap_sg; - } - - els = sp->ctx; - els->ctx.type = - (bsg_job->request->msgcode == FC_BSG_RPT_ELS ? - SRB_ELS_CMD_RPT : SRB_ELS_CMD_HST); - els->bsg_job = bsg_job; - - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld:%x): bsg rqst type: %s els type: %x - loop-id=%x " - "portid=%02x%02x%02x.\n", vha->host_no, sp->handle, type, - bsg_job->request->rqst_data.h_els.command_code, - fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, - fcport->d_id.b.al_pa)); - - rval = qla2x00_start_sp(sp); - if (rval != QLA_SUCCESS) { - kfree(sp->ctx); - mempool_free(sp, ha->srb_mempool); - rval = -EIO; - goto done_unmap_sg; - } - return rval; - -done_unmap_sg: - dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, - bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); - dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, - bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); - goto done_free_fcport; - -done_free_fcport: - if (bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN) - kfree(fcport); -done: - return rval; -} - -static int -qla2x00_process_ct(struct fc_bsg_job *bsg_job) -{ - srb_t *sp; - struct Scsi_Host *host = bsg_job->shost; - scsi_qla_host_t *vha = shost_priv(host); - struct qla_hw_data *ha = vha->hw; - int rval = (DRIVER_ERROR << 16); - int req_sg_cnt, rsp_sg_cnt; - uint16_t loop_id; - struct fc_port *fcport; - char *type = "FC_BSG_HST_CT"; - struct srb_bsg *ct; - - /* pass through is supported only for ISP 4Gb or higher */ - if (!IS_FWI2_CAPABLE(ha)) { - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld):Firmware is not capable to support FC " - "CT pass thru\n", vha->host_no)); - rval = -EPERM; - goto done; - } - - req_sg_cnt = - dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, - bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); - if (!req_sg_cnt) { - rval = -ENOMEM; - goto done; - } - - rsp_sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, - bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); - if (!rsp_sg_cnt) { - rval = -ENOMEM; - goto done; - } - - if ((req_sg_cnt != bsg_job->request_payload.sg_cnt) || - (rsp_sg_cnt != bsg_job->reply_payload.sg_cnt)) - { - DEBUG2(qla_printk(KERN_WARNING, ha, - "dma mapping resulted in different sg counts \ - [request_sg_cnt: %x dma_request_sg_cnt: %x\ - reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n", - bsg_job->request_payload.sg_cnt, req_sg_cnt, - bsg_job->reply_payload.sg_cnt, rsp_sg_cnt)); - rval = -EAGAIN; - goto done_unmap_sg; - } - - if (!vha->flags.online) { - DEBUG2(qla_printk(KERN_WARNING, ha, - "host not online\n")); - rval = -EIO; - goto done_unmap_sg; - } - - loop_id = - (bsg_job->request->rqst_data.h_ct.preamble_word1 & 0xFF000000) - >> 24; - switch (loop_id) { - case 0xFC: - loop_id = cpu_to_le16(NPH_SNS); - break; - case 0xFA: - loop_id = vha->mgmt_svr_loop_id; - break; - default: - DEBUG2(qla_printk(KERN_INFO, ha, - "Unknown loop id: %x\n", loop_id)); - rval = -EINVAL; - goto done_unmap_sg; - } - - /* Allocate a dummy fcport structure, since functions preparing the - * IOCB and mailbox command retrieves port specific information - * from fcport structure. For Host based ELS commands there will be - * no fcport structure allocated - */ - fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); - if (!fcport) - { - rval = -ENOMEM; - goto done_unmap_sg; - } - - /* Initialize all required fields of fcport */ - fcport->vha = vha; - fcport->vp_idx = vha->vp_idx; - fcport->d_id.b.al_pa = bsg_job->request->rqst_data.h_ct.port_id[0]; - fcport->d_id.b.area = bsg_job->request->rqst_data.h_ct.port_id[1]; - fcport->d_id.b.domain = bsg_job->request->rqst_data.h_ct.port_id[2]; - fcport->loop_id = loop_id; - - /* Alloc SRB structure */ - sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_bsg)); - if (!sp) { - rval = -ENOMEM; - goto done_free_fcport; - } - - ct = sp->ctx; - ct->ctx.type = SRB_CT_CMD; - ct->bsg_job = bsg_job; - - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld:%x): bsg rqst type: %s els type: %x - loop-id=%x " - "portid=%02x%02x%02x.\n", vha->host_no, sp->handle, type, - (bsg_job->request->rqst_data.h_ct.preamble_word2 >> 16), - fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, - fcport->d_id.b.al_pa)); - - rval = qla2x00_start_sp(sp); - if (rval != QLA_SUCCESS) { - kfree(sp->ctx); - mempool_free(sp, ha->srb_mempool); - rval = -EIO; - goto done_free_fcport; - } - return rval; - -done_free_fcport: - kfree(fcport); -done_unmap_sg: - dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, - bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); - dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, - bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); -done: - return rval; -} - -static int -qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job) -{ - struct Scsi_Host *host = bsg_job->shost; - scsi_qla_host_t *vha = shost_priv(host); - struct qla_hw_data *ha = vha->hw; - int rval; - uint8_t command_sent; - uint32_t vendor_cmd; - char *type; - struct msg_echo_lb elreq; - uint16_t response[MAILBOX_REGISTER_COUNT]; - uint8_t* fw_sts_ptr; - uint8_t *req_data; - dma_addr_t req_data_dma; - uint32_t req_data_len; - uint8_t *rsp_data; - dma_addr_t rsp_data_dma; - uint32_t rsp_data_len; - - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - rval = -EBUSY; - goto done; - } - - if (!vha->flags.online) { - DEBUG2(qla_printk(KERN_WARNING, ha, - "host not online\n")); - rval = -EIO; - goto done; - } - - elreq.req_sg_cnt = - dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, - bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); - if (!elreq.req_sg_cnt) { - rval = -ENOMEM; - goto done; - } - elreq.rsp_sg_cnt = - dma_map_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, - bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); - if (!elreq.rsp_sg_cnt) { - rval = -ENOMEM; - goto done; - } - - if ((elreq.req_sg_cnt != bsg_job->request_payload.sg_cnt) || - (elreq.rsp_sg_cnt != bsg_job->reply_payload.sg_cnt)) - { - DEBUG2(printk(KERN_INFO - "dma mapping resulted in different sg counts \ - [request_sg_cnt: %x dma_request_sg_cnt: %x\ - reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n", - bsg_job->request_payload.sg_cnt, elreq.req_sg_cnt, - bsg_job->reply_payload.sg_cnt, elreq.rsp_sg_cnt)); - rval = -EAGAIN; - goto done_unmap_sg; - } - req_data_len = rsp_data_len = bsg_job->request_payload.payload_len; - req_data = dma_alloc_coherent(&ha->pdev->dev, req_data_len, - &req_data_dma, GFP_KERNEL); - - rsp_data = dma_alloc_coherent(&ha->pdev->dev, rsp_data_len, - &rsp_data_dma, GFP_KERNEL); - - /* Copy the request buffer in req_data now */ - sg_copy_to_buffer(bsg_job->request_payload.sg_list, - bsg_job->request_payload.sg_cnt, req_data, - req_data_len); - - elreq.send_dma = req_data_dma; - elreq.rcv_dma = rsp_data_dma; - elreq.transfer_size = req_data_len; - - /* Vendor cmd : loopback or ECHO diagnostic - * Options: - * Loopback : Either internal or external loopback - * ECHO: ECHO ELS or Vendor specific FC4 link data - */ - vendor_cmd = bsg_job->request->rqst_data.h_vendor.vendor_cmd[0]; - elreq.options = - *(((uint32_t *)bsg_job->request->rqst_data.h_vendor.vendor_cmd) - + 1); - - switch (bsg_job->request->rqst_data.h_vendor.vendor_cmd[0]) { - case QL_VND_LOOPBACK: - if (ha->current_topology != ISP_CFG_F) { - type = "FC_BSG_HST_VENDOR_LOOPBACK"; - - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld) bsg rqst type: %s vendor rqst type: %x options: %x.\n", - vha->host_no, type, vendor_cmd, elreq.options)); - - command_sent = INT_DEF_LB_LOOPBACK_CMD; - rval = qla2x00_loopback_test(vha, &elreq, response); - if (IS_QLA81XX(ha)) { - if (response[0] == MBS_COMMAND_ERROR && response[1] == MBS_LB_RESET) { - DEBUG2(printk(KERN_ERR "%s(%ld): ABORTing " - "ISP\n", __func__, vha->host_no)); - set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); - qla2xxx_wake_dpc(vha); - } - } - } else { - type = "FC_BSG_HST_VENDOR_ECHO_DIAG"; - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld) bsg rqst type: %s vendor rqst type: %x options: %x.\n", - vha->host_no, type, vendor_cmd, elreq.options)); - - command_sent = INT_DEF_LB_ECHO_CMD; - rval = qla2x00_echo_test(vha, &elreq, response); - } - break; - case QLA84_RESET: - if (!IS_QLA84XX(vha->hw)) { - rval = -EINVAL; - DEBUG16(printk( - "%s(%ld): 8xxx exiting.\n", - __func__, vha->host_no)); - return rval; - } - rval = qla84xx_reset(vha, &elreq, bsg_job); - break; - case QLA84_MGMT_CMD: - if (!IS_QLA84XX(vha->hw)) { - rval = -EINVAL; - DEBUG16(printk( - "%s(%ld): 8xxx exiting.\n", - __func__, vha->host_no)); - return rval; - } - rval = qla84xx_mgmt_cmd(vha, &elreq, bsg_job); - break; - default: - rval = -ENOSYS; - } - - if (rval != QLA_SUCCESS) { - DEBUG2(qla_printk(KERN_WARNING, ha, - "scsi(%ld) Vendor request %s failed\n", vha->host_no, type)); - rval = 0; - bsg_job->reply->result = (DID_ERROR << 16); - bsg_job->reply->reply_payload_rcv_len = 0; - fw_sts_ptr = ((uint8_t*)bsg_job->req->sense) + sizeof(struct fc_bsg_reply); - memcpy( fw_sts_ptr, response, sizeof(response)); - fw_sts_ptr += sizeof(response); - *fw_sts_ptr = command_sent; - } else { - DEBUG2(qla_printk(KERN_WARNING, ha, - "scsi(%ld) Vendor request %s completed\n", vha->host_no, type)); - rval = bsg_job->reply->result = 0; - bsg_job->reply_len = sizeof(struct fc_bsg_reply) + sizeof(response) + sizeof(uint8_t); - bsg_job->reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len; - fw_sts_ptr = ((uint8_t*)bsg_job->req->sense) + sizeof(struct fc_bsg_reply); - memcpy(fw_sts_ptr, response, sizeof(response)); - fw_sts_ptr += sizeof(response); - *fw_sts_ptr = command_sent; - sg_copy_from_buffer(bsg_job->reply_payload.sg_list, - bsg_job->reply_payload.sg_cnt, rsp_data, - rsp_data_len); - } - bsg_job->job_done(bsg_job); - -done_unmap_sg: - - if(req_data) - dma_free_coherent(&ha->pdev->dev, req_data_len, - req_data, req_data_dma); - dma_unmap_sg(&ha->pdev->dev, - bsg_job->request_payload.sg_list, - bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); - dma_unmap_sg(&ha->pdev->dev, - bsg_job->reply_payload.sg_list, - bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); - -done: - return rval; -} - -static int -qla24xx_bsg_request(struct fc_bsg_job *bsg_job) -{ - int ret = -EINVAL; - - switch (bsg_job->request->msgcode) { - case FC_BSG_RPT_ELS: - case FC_BSG_HST_ELS_NOLOGIN: - ret = qla2x00_process_els(bsg_job); - break; - case FC_BSG_HST_CT: - ret = qla2x00_process_ct(bsg_job); - break; - case FC_BSG_HST_VENDOR: - ret = qla2x00_process_vendor_specific(bsg_job); - break; - case FC_BSG_HST_ADD_RPORT: - case FC_BSG_HST_DEL_RPORT: - case FC_BSG_RPT_CT: - default: - DEBUG2(printk("qla2xxx: unsupported BSG request\n")); - break; - } - return ret; -} - -static int -qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job) -{ - scsi_qla_host_t *vha = shost_priv(bsg_job->shost); - struct qla_hw_data *ha = vha->hw; - srb_t *sp; - int cnt, que; - unsigned long flags; - struct req_que *req; - struct srb_bsg *sp_bsg; - - /* find the bsg job from the active list of commands */ - spin_lock_irqsave(&ha->hardware_lock, flags); - for (que = 0; que < ha->max_req_queues; que++) { - req = ha->req_q_map[que]; - if (!req) - continue; - - for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++ ) { - sp = req->outstanding_cmds[cnt]; - - if (sp) { - sp_bsg = (struct srb_bsg*)sp->ctx; - - if (((sp_bsg->ctx.type == SRB_CT_CMD) || - (sp_bsg->ctx.type == SRB_ELS_CMD_RPT) - || ( sp_bsg->ctx.type == SRB_ELS_CMD_HST)) && - (sp_bsg->bsg_job == bsg_job)) { - if (ha->isp_ops->abort_command(sp)) { - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld): mbx abort_command failed\n", vha->host_no)); - bsg_job->req->errors = bsg_job->reply->result = -EIO; - } else { - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld): mbx abort_command success\n", vha->host_no)); - bsg_job->req->errors = bsg_job->reply->result = 0; - } - goto done; - } - } - } - } - spin_unlock_irqrestore(&ha->hardware_lock, flags); - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld) SRB not found to abort\n", vha->host_no)); - bsg_job->req->errors = bsg_job->reply->result = -ENXIO; - return 0; - -done: - spin_unlock_irqrestore(&ha->hardware_lock, flags); - if (bsg_job->request->msgcode == FC_BSG_HST_CT) - kfree(sp->fcport); - kfree(sp->ctx); - mempool_free(sp, ha->srb_mempool); - return 0; -} - struct fc_function_template qla2xxx_transport_functions = { .show_host_node_name = 1, @@ -2516,125 +1938,3 @@ qla2x00_init_host_attr(scsi_qla_host_t *vha) speed = FC_PORTSPEED_1GBIT; fc_host_supported_speeds(vha->host) = speed; } -static int -qla84xx_reset(scsi_qla_host_t *ha, struct msg_echo_lb *mreq, struct fc_bsg_job *bsg_job) -{ - int ret = 0; - int cmd; - uint16_t cmd_status; - - DEBUG16(printk("%s(%ld): entered.\n", __func__, ha->host_no)); - - cmd = (*((bsg_job->request->rqst_data.h_vendor.vendor_cmd) + 2)) - == A84_RESET_FLAG_ENABLE_DIAG_FW ? - A84_ISSUE_RESET_DIAG_FW : A84_ISSUE_RESET_OP_FW; - ret = qla84xx_reset_chip(ha, cmd == A84_ISSUE_RESET_DIAG_FW, - &cmd_status); - return ret; -} - -static int -qla84xx_mgmt_cmd(scsi_qla_host_t *ha, struct msg_echo_lb *mreq, struct fc_bsg_job *bsg_job) -{ - struct access_chip_84xx *mn; - dma_addr_t mn_dma, mgmt_dma; - void *mgmt_b = NULL; - int ret = 0; - int rsp_hdr_len, len = 0; - struct qla84_msg_mgmt *ql84_mgmt; - - ql84_mgmt = (struct qla84_msg_mgmt *) vmalloc(sizeof(struct qla84_msg_mgmt)); - ql84_mgmt->cmd = - *((uint16_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 2)); - ql84_mgmt->mgmtp.u.mem.start_addr = - *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 3)); - ql84_mgmt->len = - *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 4)); - ql84_mgmt->mgmtp.u.config.id = - *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 5)); - ql84_mgmt->mgmtp.u.config.param0 = - *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 6)); - ql84_mgmt->mgmtp.u.config.param1 = - *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 7)); - ql84_mgmt->mgmtp.u.info.type = - *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 8)); - ql84_mgmt->mgmtp.u.info.context = - *((uint32_t *)(bsg_job->request->rqst_data.h_vendor.vendor_cmd + 9)); - - rsp_hdr_len = bsg_job->request_payload.payload_len; - - mn = dma_pool_alloc(ha->hw->s_dma_pool, GFP_KERNEL, &mn_dma); - if (mn == NULL) { - DEBUG2(printk(KERN_ERR "%s: dma alloc for fw buffer " - "failed%lu\n", __func__, ha->host_no)); - return -ENOMEM; - } - - memset(mn, 0, sizeof (struct access_chip_84xx)); - - mn->entry_type = ACCESS_CHIP_IOCB_TYPE; - mn->entry_count = 1; - - switch (ql84_mgmt->cmd) { - case QLA84_MGMT_READ_MEM: - mn->options = cpu_to_le16(ACO_DUMP_MEMORY); - mn->parameter1 = cpu_to_le32(ql84_mgmt->mgmtp.u.mem.start_addr); - break; - case QLA84_MGMT_WRITE_MEM: - mn->options = cpu_to_le16(ACO_LOAD_MEMORY); - mn->parameter1 = cpu_to_le32(ql84_mgmt->mgmtp.u.mem.start_addr); - break; - case QLA84_MGMT_CHNG_CONFIG: - mn->options = cpu_to_le16(ACO_CHANGE_CONFIG_PARAM); - mn->parameter1 = cpu_to_le32(ql84_mgmt->mgmtp.u.config.id); - mn->parameter2 = cpu_to_le32(ql84_mgmt->mgmtp.u.config.param0); - mn->parameter3 = cpu_to_le32(ql84_mgmt->mgmtp.u.config.param1); - break; - case QLA84_MGMT_GET_INFO: - mn->options = cpu_to_le16(ACO_REQUEST_INFO); - mn->parameter1 = cpu_to_le32(ql84_mgmt->mgmtp.u.info.type); - mn->parameter2 = cpu_to_le32(ql84_mgmt->mgmtp.u.info.context); - break; - default: - ret = -EIO; - goto exit_mgmt0; - } - - if ((len == ql84_mgmt->len) && - ql84_mgmt->cmd != QLA84_MGMT_CHNG_CONFIG) { - mgmt_b = dma_alloc_coherent(&ha->hw->pdev->dev, len, - &mgmt_dma, GFP_KERNEL); - if (mgmt_b == NULL) { - DEBUG2(printk(KERN_ERR "%s: dma alloc mgmt_b " - "failed%lu\n", __func__, ha->host_no)); - ret = -ENOMEM; - goto exit_mgmt0; - } - mn->total_byte_cnt = cpu_to_le32(ql84_mgmt->len); - mn->dseg_count = cpu_to_le16(1); - mn->dseg_address[0] = cpu_to_le32(LSD(mgmt_dma)); - mn->dseg_address[1] = cpu_to_le32(MSD(mgmt_dma)); - mn->dseg_length = cpu_to_le32(len); - - if (ql84_mgmt->cmd == QLA84_MGMT_WRITE_MEM) { - memcpy(mgmt_b, ql84_mgmt->payload, len); - } - } - - ret = qla2x00_issue_iocb(ha, mn, mn_dma, 0); - if ((ret != QLA_SUCCESS) || (ql84_mgmt->cmd == QLA84_MGMT_WRITE_MEM) - || (ql84_mgmt->cmd == QLA84_MGMT_CHNG_CONFIG)) { - if (ret != QLA_SUCCESS) - DEBUG2(printk(KERN_ERR "%s(%lu): failed\n", - __func__, ha->host_no)); - } else if ((ql84_mgmt->cmd == QLA84_MGMT_READ_MEM) || - (ql84_mgmt->cmd == QLA84_MGMT_GET_INFO)) { - } - - if (mgmt_b) - dma_free_coherent(&ha->hw->pdev->dev, len, mgmt_b, mgmt_dma); - -exit_mgmt0: - dma_pool_free(ha->hw->s_dma_pool, mn, mn_dma); - return ret; -} diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c new file mode 100644 index 000000000000..c20292fde720 --- /dev/null +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -0,0 +1,1040 @@ +/* + * QLogic Fibre Channel HBA Driver + * Copyright (c) 2003-2008 QLogic Corporation + * + * See LICENSE.qla2xxx for copyright and licensing details. + */ +#include "qla_def.h" + +#include +#include +#include + +/* BSG support for ELS/CT pass through */ +inline srb_t * +qla2x00_get_ctx_bsg_sp(scsi_qla_host_t *vha, fc_port_t *fcport, size_t size) +{ + srb_t *sp; + struct qla_hw_data *ha = vha->hw; + struct srb_bsg_ctx *ctx; + + sp = mempool_alloc(ha->srb_mempool, GFP_KERNEL); + if (!sp) + goto done; + ctx = kzalloc(size, GFP_KERNEL); + if (!ctx) { + mempool_free(sp, ha->srb_mempool); + sp = NULL; + goto done; + } + + memset(sp, 0, sizeof(*sp)); + sp->fcport = fcport; + sp->ctx = ctx; +done: + return sp; +} + +static int +qla2x00_process_els(struct fc_bsg_job *bsg_job) +{ + struct fc_rport *rport; + fc_port_t *fcport; + struct Scsi_Host *host; + scsi_qla_host_t *vha; + struct qla_hw_data *ha; + srb_t *sp; + const char *type; + int req_sg_cnt, rsp_sg_cnt; + int rval = (DRIVER_ERROR << 16); + uint16_t nextlid = 0; + struct srb_bsg *els; + + /* Multiple SG's are not supported for ELS requests */ + if (bsg_job->request_payload.sg_cnt > 1 || + bsg_job->reply_payload.sg_cnt > 1) { + DEBUG2(printk(KERN_INFO + "multiple SG's are not supported for ELS requests" + " [request_sg_cnt: %x reply_sg_cnt: %x]\n", + bsg_job->request_payload.sg_cnt, + bsg_job->reply_payload.sg_cnt)); + rval = -EPERM; + goto done; + } + + /* ELS request for rport */ + if (bsg_job->request->msgcode == FC_BSG_RPT_ELS) { + rport = bsg_job->rport; + fcport = *(fc_port_t **) rport->dd_data; + host = rport_to_shost(rport); + vha = shost_priv(host); + ha = vha->hw; + type = "FC_BSG_RPT_ELS"; + + /* make sure the rport is logged in, + * if not perform fabric login + */ + if (qla2x00_fabric_login(vha, fcport, &nextlid)) { + DEBUG2(qla_printk(KERN_WARNING, ha, + "failed to login port %06X for ELS passthru\n", + fcport->d_id.b24)); + rval = -EIO; + goto done; + } + } else { + host = bsg_job->shost; + vha = shost_priv(host); + ha = vha->hw; + type = "FC_BSG_HST_ELS_NOLOGIN"; + + /* Allocate a dummy fcport structure, since functions + * preparing the IOCB and mailbox command retrieves port + * specific information from fcport structure. For Host based + * ELS commands there will be no fcport structure allocated + */ + fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); + if (!fcport) { + rval = -ENOMEM; + goto done; + } + + /* Initialize all required fields of fcport */ + fcport->vha = vha; + fcport->vp_idx = vha->vp_idx; + fcport->d_id.b.al_pa = + bsg_job->request->rqst_data.h_els.port_id[0]; + fcport->d_id.b.area = + bsg_job->request->rqst_data.h_els.port_id[1]; + fcport->d_id.b.domain = + bsg_job->request->rqst_data.h_els.port_id[2]; + fcport->loop_id = + (fcport->d_id.b.al_pa == 0xFD) ? + NPH_FABRIC_CONTROLLER : NPH_F_PORT; + } + + if (!vha->flags.online) { + DEBUG2(qla_printk(KERN_WARNING, ha, + "host not online\n")); + rval = -EIO; + goto done; + } + + req_sg_cnt = + dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); + if (!req_sg_cnt) { + rval = -ENOMEM; + goto done_free_fcport; + } + rsp_sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); + if (!rsp_sg_cnt) { + rval = -ENOMEM; + goto done_free_fcport; + } + + if ((req_sg_cnt != bsg_job->request_payload.sg_cnt) || + (rsp_sg_cnt != bsg_job->reply_payload.sg_cnt)) + { + DEBUG2(printk(KERN_INFO + "dma mapping resulted in different sg counts \ + [request_sg_cnt: %x dma_request_sg_cnt: %x\ + reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n", + bsg_job->request_payload.sg_cnt, req_sg_cnt, + bsg_job->reply_payload.sg_cnt, rsp_sg_cnt)); + rval = -EAGAIN; + goto done_unmap_sg; + } + + /* Alloc SRB structure */ + sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_bsg)); + if (!sp) { + rval = -ENOMEM; + goto done_unmap_sg; + } + + els = sp->ctx; + els->ctx.type = + (bsg_job->request->msgcode == FC_BSG_RPT_ELS ? + SRB_ELS_CMD_RPT : SRB_ELS_CMD_HST); + els->bsg_job = bsg_job; + + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%x): bsg rqst type: %s els type: %x - loop-id=%x " + "portid=%02x%02x%02x.\n", vha->host_no, sp->handle, type, + bsg_job->request->rqst_data.h_els.command_code, + fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, + fcport->d_id.b.al_pa)); + + rval = qla2x00_start_sp(sp); + if (rval != QLA_SUCCESS) { + kfree(sp->ctx); + mempool_free(sp, ha->srb_mempool); + rval = -EIO; + goto done_unmap_sg; + } + return rval; + +done_unmap_sg: + dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); + dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); + goto done_free_fcport; + +done_free_fcport: + if (bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN) + kfree(fcport); +done: + return rval; +} + +static int +qla2x00_process_ct(struct fc_bsg_job *bsg_job) +{ + srb_t *sp; + struct Scsi_Host *host = bsg_job->shost; + scsi_qla_host_t *vha = shost_priv(host); + struct qla_hw_data *ha = vha->hw; + int rval = (DRIVER_ERROR << 16); + int req_sg_cnt, rsp_sg_cnt; + uint16_t loop_id; + struct fc_port *fcport; + char *type = "FC_BSG_HST_CT"; + struct srb_bsg *ct; + + /* pass through is supported only for ISP 4Gb or higher */ + if (!IS_FWI2_CAPABLE(ha)) { + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld):Firmware is not capable to support FC " + "CT pass thru\n", vha->host_no)); + rval = -EPERM; + goto done; + } + + req_sg_cnt = + dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); + if (!req_sg_cnt) { + rval = -ENOMEM; + goto done; + } + + rsp_sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); + if (!rsp_sg_cnt) { + rval = -ENOMEM; + goto done; + } + + if ((req_sg_cnt != bsg_job->request_payload.sg_cnt) || + (rsp_sg_cnt != bsg_job->reply_payload.sg_cnt)) + { + DEBUG2(qla_printk(KERN_WARNING, ha, + "[request_sg_cnt: %x dma_request_sg_cnt: %x\ + reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n", + bsg_job->request_payload.sg_cnt, req_sg_cnt, + bsg_job->reply_payload.sg_cnt, rsp_sg_cnt)); + rval = -EAGAIN; + goto done_unmap_sg; + } + + if (!vha->flags.online) { + DEBUG2(qla_printk(KERN_WARNING, ha, + "host not online\n")); + rval = -EIO; + goto done_unmap_sg; + } + + loop_id = + (bsg_job->request->rqst_data.h_ct.preamble_word1 & 0xFF000000) + >> 24; + switch (loop_id) { + case 0xFC: + loop_id = cpu_to_le16(NPH_SNS); + break; + case 0xFA: + loop_id = vha->mgmt_svr_loop_id; + break; + default: + DEBUG2(qla_printk(KERN_INFO, ha, + "Unknown loop id: %x\n", loop_id)); + rval = -EINVAL; + goto done_unmap_sg; + } + + /* Allocate a dummy fcport structure, since functions preparing the + * IOCB and mailbox command retrieves port specific information + * from fcport structure. For Host based ELS commands there will be + * no fcport structure allocated + */ + fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); + if (!fcport) + { + rval = -ENOMEM; + goto done_unmap_sg; + } + + /* Initialize all required fields of fcport */ + fcport->vha = vha; + fcport->vp_idx = vha->vp_idx; + fcport->d_id.b.al_pa = bsg_job->request->rqst_data.h_ct.port_id[0]; + fcport->d_id.b.area = bsg_job->request->rqst_data.h_ct.port_id[1]; + fcport->d_id.b.domain = bsg_job->request->rqst_data.h_ct.port_id[2]; + fcport->loop_id = loop_id; + + /* Alloc SRB structure */ + sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_bsg)); + if (!sp) { + rval = -ENOMEM; + goto done_free_fcport; + } + + ct = sp->ctx; + ct->ctx.type = SRB_CT_CMD; + ct->bsg_job = bsg_job; + + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%x): bsg rqst type: %s els type: %x - loop-id=%x " + "portid=%02x%02x%02x.\n", vha->host_no, sp->handle, type, + (bsg_job->request->rqst_data.h_ct.preamble_word2 >> 16), + fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, + fcport->d_id.b.al_pa)); + + rval = qla2x00_start_sp(sp); + if (rval != QLA_SUCCESS) { + kfree(sp->ctx); + mempool_free(sp, ha->srb_mempool); + rval = -EIO; + goto done_free_fcport; + } + return rval; + +done_free_fcport: + kfree(fcport); +done_unmap_sg: + dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); + dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); +done: + return rval; +} + +static int +qla2x00_process_loopback(struct fc_bsg_job *bsg_job) +{ + struct Scsi_Host *host = bsg_job->shost; + scsi_qla_host_t *vha = shost_priv(host); + struct qla_hw_data *ha = vha->hw; + int rval; + uint8_t command_sent; + char *type; + struct msg_echo_lb elreq; + uint16_t response[MAILBOX_REGISTER_COUNT]; + uint8_t* fw_sts_ptr; + uint8_t *req_data = NULL; + dma_addr_t req_data_dma; + uint32_t req_data_len; + uint8_t *rsp_data = NULL; + dma_addr_t rsp_data_dma; + uint32_t rsp_data_len; + + if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || + test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) + return -EBUSY; + + if (!vha->flags.online) { + DEBUG2(qla_printk(KERN_WARNING, ha, "host not online\n")); + return -EIO; + } + + elreq.req_sg_cnt = dma_map_sg(&ha->pdev->dev, + bsg_job->request_payload.sg_list, bsg_job->request_payload.sg_cnt, + DMA_TO_DEVICE); + + if (!elreq.req_sg_cnt) + return -ENOMEM; + + elreq.rsp_sg_cnt = dma_map_sg(&ha->pdev->dev, + bsg_job->reply_payload.sg_list, bsg_job->reply_payload.sg_cnt, + DMA_FROM_DEVICE); + + if (!elreq.rsp_sg_cnt) { + rval = -ENOMEM; + goto done_unmap_req_sg; +} + + if ((elreq.req_sg_cnt != bsg_job->request_payload.sg_cnt) || + (elreq.rsp_sg_cnt != bsg_job->reply_payload.sg_cnt)) { + DEBUG2(printk(KERN_INFO + "dma mapping resulted in different sg counts " + "[request_sg_cnt: %x dma_request_sg_cnt: %x " + "reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n", + bsg_job->request_payload.sg_cnt, elreq.req_sg_cnt, + bsg_job->reply_payload.sg_cnt, elreq.rsp_sg_cnt)); + rval = -EAGAIN; + goto done_unmap_sg; + } + req_data_len = rsp_data_len = bsg_job->request_payload.payload_len; + req_data = dma_alloc_coherent(&ha->pdev->dev, req_data_len, + &req_data_dma, GFP_KERNEL); + if (!req_data) { + DEBUG2(printk(KERN_ERR "%s: dma alloc for req_data " + "failed for host=%lu\n", __func__, vha->host_no)); + rval = -ENOMEM; + goto done_unmap_sg; + } + + rsp_data = dma_alloc_coherent(&ha->pdev->dev, rsp_data_len, + &rsp_data_dma, GFP_KERNEL); + if (!rsp_data) { + DEBUG2(printk(KERN_ERR "%s: dma alloc for rsp_data " + "failed for host=%lu\n", __func__, vha->host_no)); + rval = -ENOMEM; + goto done_free_dma_req; + } + + /* Copy the request buffer in req_data now */ + sg_copy_to_buffer(bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, req_data, req_data_len); + + elreq.send_dma = req_data_dma; + elreq.rcv_dma = rsp_data_dma; + elreq.transfer_size = req_data_len; + + elreq.options = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1]; + + if (ha->current_topology != ISP_CFG_F) { + type = "FC_BSG_HST_VENDOR_LOOPBACK"; + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld) bsg rqst type: %s\n", + vha->host_no, type)); + + command_sent = INT_DEF_LB_LOOPBACK_CMD; + rval = qla2x00_loopback_test(vha, &elreq, response); + if (IS_QLA81XX(ha)) { + if (response[0] == MBS_COMMAND_ERROR && + response[1] == MBS_LB_RESET) { + DEBUG2(printk(KERN_ERR "%s(%ld): ABORTing " + "ISP\n", __func__, vha->host_no)); + set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); + qla2xxx_wake_dpc(vha); + } + } + } else { + type = "FC_BSG_HST_VENDOR_ECHO_DIAG"; + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld) bsg rqst type: %s\n" ,vha->host_no, type)); + command_sent = INT_DEF_LB_ECHO_CMD; + rval = qla2x00_echo_test(vha, &elreq, response); + } + + if (rval) { + DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld) Vendor " + "request %s failed\n", vha->host_no, type)); + + fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) + + sizeof(struct fc_bsg_reply); + + memcpy(fw_sts_ptr, response, sizeof(response)); + fw_sts_ptr += sizeof(response); + *fw_sts_ptr = command_sent; + rval = 0; + bsg_job->reply->reply_payload_rcv_len = 0; + bsg_job->reply->result = (DID_ERROR << 16); + } else { + DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld) Vendor " + "request %s completed\n", vha->host_no, type)); + + bsg_job->reply_len = sizeof(struct fc_bsg_reply) + + sizeof(response) + sizeof(uint8_t); + bsg_job->reply->reply_payload_rcv_len = + bsg_job->reply_payload.payload_len; + fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) + + sizeof(struct fc_bsg_reply); + memcpy(fw_sts_ptr, response, sizeof(response)); + fw_sts_ptr += sizeof(response); + *fw_sts_ptr = command_sent; + bsg_job->reply->result = DID_OK; + sg_copy_from_buffer(bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, rsp_data, + rsp_data_len); + } + bsg_job->job_done(bsg_job); + + dma_free_coherent(&ha->pdev->dev, rsp_data_len, + rsp_data, rsp_data_dma); +done_free_dma_req: + dma_free_coherent(&ha->pdev->dev, req_data_len, + req_data, req_data_dma); +done_unmap_sg: + dma_unmap_sg(&ha->pdev->dev, + bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); +done_unmap_req_sg: + dma_unmap_sg(&ha->pdev->dev, + bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); + return rval; +} + +static int +qla84xx_reset(struct fc_bsg_job *bsg_job) +{ + struct Scsi_Host *host = bsg_job->shost; + scsi_qla_host_t *vha = shost_priv(host); + struct qla_hw_data *ha = vha->hw; + int rval = 0; + uint32_t flag; + + if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || + test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) + return -EBUSY; + + if (!IS_QLA84XX(ha)) { + DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld): Not 84xx, " + "exiting.\n", vha->host_no)); + return -EINVAL; + } + + flag = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1]; + + rval = qla84xx_reset_chip(vha, flag == A84_ISSUE_RESET_DIAG_FW); + + if (rval) { + DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld) Vendor " + "request 84xx reset failed\n", vha->host_no)); + rval = bsg_job->reply->reply_payload_rcv_len = 0; + bsg_job->reply->result = (DID_ERROR << 16); + + } else { + DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld) Vendor " + "request 84xx reset completed\n", vha->host_no)); + bsg_job->reply->result = DID_OK; + } + + bsg_job->job_done(bsg_job); + return rval; +} + +static int +qla84xx_updatefw(struct fc_bsg_job *bsg_job) +{ + struct Scsi_Host *host = bsg_job->shost; + scsi_qla_host_t *vha = shost_priv(host); + struct qla_hw_data *ha = vha->hw; + struct verify_chip_entry_84xx *mn = NULL; + dma_addr_t mn_dma, fw_dma; + void *fw_buf = NULL; + int rval = 0; + uint32_t sg_cnt; + uint32_t data_len; + uint16_t options; + uint32_t flag; + uint32_t fw_ver; + + if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || + test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) + return -EBUSY; + + if (!IS_QLA84XX(ha)) { + DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld): Not 84xx, " + "exiting.\n", vha->host_no)); + return -EINVAL; + } + + sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); + if (!sg_cnt) + return -ENOMEM; + + if (sg_cnt != bsg_job->request_payload.sg_cnt) { + DEBUG2(printk(KERN_INFO + "dma mapping resulted in different sg counts " + "request_sg_cnt: %x dma_request_sg_cnt: %x ", + bsg_job->request_payload.sg_cnt, sg_cnt)); + rval = -EAGAIN; + goto done_unmap_sg; + } + + data_len = bsg_job->request_payload.payload_len; + fw_buf = dma_alloc_coherent(&ha->pdev->dev, data_len, + &fw_dma, GFP_KERNEL); + if (!fw_buf) { + DEBUG2(printk(KERN_ERR "%s: dma alloc for fw_buf " + "failed for host=%lu\n", __func__, vha->host_no)); + rval = -ENOMEM; + goto done_unmap_sg; + } + + sg_copy_to_buffer(bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, fw_buf, data_len); + + mn = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &mn_dma); + if (!mn) { + DEBUG2(printk(KERN_ERR "%s: dma alloc for fw buffer " + "failed for host=%lu\n", __func__, vha->host_no)); + rval = -ENOMEM; + goto done_free_fw_buf; + } + + flag = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1]; + fw_ver = le32_to_cpu(*((uint32_t *)((uint32_t *)fw_buf + 2))); + + memset(mn, 0, sizeof(struct access_chip_84xx)); + mn->entry_type = VERIFY_CHIP_IOCB_TYPE; + mn->entry_count = 1; + + options = VCO_FORCE_UPDATE | VCO_END_OF_DATA; + if (flag == A84_ISSUE_UPDATE_DIAGFW_CMD) + options |= VCO_DIAG_FW; + + mn->options = cpu_to_le16(options); + mn->fw_ver = cpu_to_le32(fw_ver); + mn->fw_size = cpu_to_le32(data_len); + mn->fw_seq_size = cpu_to_le32(data_len); + mn->dseg_address[0] = cpu_to_le32(LSD(fw_dma)); + mn->dseg_address[1] = cpu_to_le32(MSD(fw_dma)); + mn->dseg_length = cpu_to_le32(data_len); + mn->data_seg_cnt = cpu_to_le16(1); + + rval = qla2x00_issue_iocb_timeout(vha, mn, mn_dma, 0, 120); + + if (rval) { + DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld) Vendor " + "request 84xx updatefw failed\n", vha->host_no)); + + rval = bsg_job->reply->reply_payload_rcv_len = 0; + bsg_job->reply->result = (DID_ERROR << 16); + + } else { + DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld) Vendor " + "request 84xx updatefw completed\n", vha->host_no)); + + bsg_job->reply_len = sizeof(struct fc_bsg_reply); + bsg_job->reply->result = DID_OK; + } + + bsg_job->job_done(bsg_job); + dma_pool_free(ha->s_dma_pool, mn, mn_dma); + +done_free_fw_buf: + dma_free_coherent(&ha->pdev->dev, data_len, fw_buf, fw_dma); + +done_unmap_sg: + dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); + + return rval; +} + +static int +qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job) +{ + struct Scsi_Host *host = bsg_job->shost; + scsi_qla_host_t *vha = shost_priv(host); + struct qla_hw_data *ha = vha->hw; + struct access_chip_84xx *mn = NULL; + dma_addr_t mn_dma, mgmt_dma; + void *mgmt_b = NULL; + int rval = 0; + struct qla_bsg_a84_mgmt *ql84_mgmt; + uint32_t sg_cnt; + uint32_t data_len; + uint32_t dma_direction = DMA_NONE; + + if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || + test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) + return -EBUSY; + + if (!IS_QLA84XX(ha)) { + DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld): Not 84xx, " + "exiting.\n", vha->host_no)); + return -EINVAL; + } + + ql84_mgmt = (struct qla_bsg_a84_mgmt *)((char *)bsg_job->request + + sizeof(struct fc_bsg_request)); + if (!ql84_mgmt) { + DEBUG2(printk("%s(%ld): mgmt header not provided, exiting.\n", + __func__, vha->host_no)); + return -EINVAL; + } + + mn = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &mn_dma); + if (!mn) { + DEBUG2(printk(KERN_ERR "%s: dma alloc for fw buffer " + "failed for host=%lu\n", __func__, vha->host_no)); + return -ENOMEM; + } + + memset(mn, 0, sizeof(struct access_chip_84xx)); + mn->entry_type = ACCESS_CHIP_IOCB_TYPE; + mn->entry_count = 1; + + switch (ql84_mgmt->mgmt.cmd) { + case QLA84_MGMT_READ_MEM: + case QLA84_MGMT_GET_INFO: + sg_cnt = dma_map_sg(&ha->pdev->dev, + bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); + if (!sg_cnt) { + rval = -ENOMEM; + goto exit_mgmt; + } + + dma_direction = DMA_FROM_DEVICE; + + if (sg_cnt != bsg_job->reply_payload.sg_cnt) { + DEBUG2(printk(KERN_INFO + "dma mapping resulted in different sg counts " + "reply_sg_cnt: %x dma_reply_sg_cnt: %x\n", + bsg_job->reply_payload.sg_cnt, sg_cnt)); + rval = -EAGAIN; + goto done_unmap_sg; + } + + data_len = bsg_job->reply_payload.payload_len; + + mgmt_b = dma_alloc_coherent(&ha->pdev->dev, data_len, + &mgmt_dma, GFP_KERNEL); + if (!mgmt_b) { + DEBUG2(printk(KERN_ERR "%s: dma alloc for mgmt_b " + "failed for host=%lu\n", + __func__, vha->host_no)); + rval = -ENOMEM; + goto done_unmap_sg; + } + + if (ql84_mgmt->mgmt.cmd == QLA84_MGMT_READ_MEM) { + mn->options = cpu_to_le16(ACO_DUMP_MEMORY); + mn->parameter1 = + cpu_to_le32( + ql84_mgmt->mgmt.mgmtp.u.mem.start_addr); + + } else if (ql84_mgmt->mgmt.cmd == QLA84_MGMT_GET_INFO) { + mn->options = cpu_to_le16(ACO_REQUEST_INFO); + mn->parameter1 = + cpu_to_le32(ql84_mgmt->mgmt.mgmtp.u.info.type); + + mn->parameter2 = + cpu_to_le32( + ql84_mgmt->mgmt.mgmtp.u.info.context); + } + break; + + case QLA84_MGMT_WRITE_MEM: + sg_cnt = dma_map_sg(&ha->pdev->dev, + bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); + + if (!sg_cnt) { + rval = -ENOMEM; + goto exit_mgmt; + } + + dma_direction = DMA_TO_DEVICE; + + if (sg_cnt != bsg_job->request_payload.sg_cnt) { + DEBUG2(printk(KERN_INFO + "dma mapping resulted in different sg counts " + "request_sg_cnt: %x dma_request_sg_cnt: %x ", + bsg_job->request_payload.sg_cnt, sg_cnt)); + rval = -EAGAIN; + goto done_unmap_sg; + } + + data_len = bsg_job->request_payload.payload_len; + mgmt_b = dma_alloc_coherent(&ha->pdev->dev, data_len, + &mgmt_dma, GFP_KERNEL); + if (!mgmt_b) { + DEBUG2(printk(KERN_ERR "%s: dma alloc for mgmt_b " + "failed for host=%lu\n", + __func__, vha->host_no)); + rval = -ENOMEM; + goto done_unmap_sg; + } + + sg_copy_to_buffer(bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, mgmt_b, data_len); + + mn->options = cpu_to_le16(ACO_LOAD_MEMORY); + mn->parameter1 = + cpu_to_le32(ql84_mgmt->mgmt.mgmtp.u.mem.start_addr); + break; + + case QLA84_MGMT_CHNG_CONFIG: + mn->options = cpu_to_le16(ACO_CHANGE_CONFIG_PARAM); + mn->parameter1 = + cpu_to_le32(ql84_mgmt->mgmt.mgmtp.u.config.id); + + mn->parameter2 = + cpu_to_le32(ql84_mgmt->mgmt.mgmtp.u.config.param0); + + mn->parameter3 = + cpu_to_le32(ql84_mgmt->mgmt.mgmtp.u.config.param1); + break; + + default: + rval = -EIO; + goto exit_mgmt; + } + + if (ql84_mgmt->mgmt.cmd != QLA84_MGMT_CHNG_CONFIG) { + mn->total_byte_cnt = cpu_to_le32(ql84_mgmt->mgmt.len); + mn->dseg_count = cpu_to_le16(1); + mn->dseg_address[0] = cpu_to_le32(LSD(mgmt_dma)); + mn->dseg_address[1] = cpu_to_le32(MSD(mgmt_dma)); + mn->dseg_length = cpu_to_le32(ql84_mgmt->mgmt.len); + } + + rval = qla2x00_issue_iocb(vha, mn, mn_dma, 0); + + if (rval) { + DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld) Vendor " + "request 84xx mgmt failed\n", vha->host_no)); + + rval = bsg_job->reply->reply_payload_rcv_len = 0; + bsg_job->reply->result = (DID_ERROR << 16); + + } else { + DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld) Vendor " + "request 84xx mgmt completed\n", vha->host_no)); + + bsg_job->reply_len = sizeof(struct fc_bsg_reply); + bsg_job->reply->result = DID_OK; + + if ((ql84_mgmt->mgmt.cmd == QLA84_MGMT_READ_MEM) || + (ql84_mgmt->mgmt.cmd == QLA84_MGMT_GET_INFO)) { + bsg_job->reply->reply_payload_rcv_len = + bsg_job->reply_payload.payload_len; + + sg_copy_from_buffer(bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, mgmt_b, data_len); + } + } + + bsg_job->job_done(bsg_job); + dma_free_coherent(&ha->pdev->dev, data_len, mgmt_b, mgmt_dma); + +done_unmap_sg: + if (dma_direction == DMA_TO_DEVICE) + dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); + else if (dma_direction == DMA_FROM_DEVICE) + dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); + +exit_mgmt: + dma_pool_free(ha->s_dma_pool, mn, mn_dma); + + return rval; +} + +static int +qla24xx_iidma(struct fc_bsg_job *bsg_job) +{ + struct Scsi_Host *host = bsg_job->shost; + scsi_qla_host_t *vha = shost_priv(host); + struct qla_hw_data *ha = vha->hw; + int rval = 0; + struct qla_port_param *port_param = NULL; + fc_port_t *fcport = NULL; + uint16_t mb[MAILBOX_REGISTER_COUNT]; + uint8_t *rsp_ptr = NULL; + + bsg_job->reply->reply_payload_rcv_len = 0; + + if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || + test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) + return -EBUSY; + + if (!IS_IIDMA_CAPABLE(vha->hw)) { + DEBUG2(qla_printk(KERN_WARNING, ha, "%s(%lu): iiDMA not " + "supported\n", __func__, vha->host_no)); + return -EINVAL; + } + + port_param = (struct qla_port_param *)((char *)bsg_job->request + + sizeof(struct fc_bsg_request)); + if (!port_param) { + DEBUG2(printk("%s(%ld): port_param header not provided, " + "exiting.\n", __func__, vha->host_no)); + return -EINVAL; + } + + if (port_param->fc_scsi_addr.dest_type != EXT_DEF_TYPE_WWPN) { + DEBUG2(printk(KERN_ERR "%s(%ld): Invalid destination type\n", + __func__, vha->host_no)); + return -EINVAL; + } + + list_for_each_entry(fcport, &vha->vp_fcports, list) { + if (fcport->port_type != FCT_TARGET) + continue; + + if (memcmp(port_param->fc_scsi_addr.dest_addr.wwpn, + fcport->port_name, sizeof(fcport->port_name))) + continue; + break; + } + + if (!fcport) { + DEBUG2(printk(KERN_ERR "%s(%ld): Failed to find port\n", + __func__, vha->host_no)); + return -EINVAL; + } + + if (port_param->mode) + rval = qla2x00_set_idma_speed(vha, fcport->loop_id, + port_param->speed, mb); + else + rval = qla2x00_get_idma_speed(vha, fcport->loop_id, + &port_param->speed, mb); + + if (rval) { + DEBUG16(printk(KERN_ERR "scsi(%ld): iIDMA cmd failed for " + "%02x%02x%02x%02x%02x%02x%02x%02x -- %04x %x %04x %04x.\n", + vha->host_no, fcport->port_name[0], + fcport->port_name[1], + fcport->port_name[2], fcport->port_name[3], + fcport->port_name[4], fcport->port_name[5], + fcport->port_name[6], fcport->port_name[7], rval, + fcport->fp_speed, mb[0], mb[1])); + rval = 0; + bsg_job->reply->result = (DID_ERROR << 16); + + } else { + if (!port_param->mode) { + bsg_job->reply_len = sizeof(struct fc_bsg_reply) + + sizeof(struct qla_port_param); + + rsp_ptr = ((uint8_t *)bsg_job->reply) + + sizeof(struct fc_bsg_reply); + + memcpy(rsp_ptr, port_param, + sizeof(struct qla_port_param)); + } + + bsg_job->reply->result = DID_OK; + } + + bsg_job->job_done(bsg_job); + return rval; +} + +static int +qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job) +{ + switch (bsg_job->request->rqst_data.h_vendor.vendor_cmd[0]) { + case QL_VND_LOOPBACK: + return qla2x00_process_loopback(bsg_job); + + case QL_VND_A84_RESET: + return qla84xx_reset(bsg_job); + + case QL_VND_A84_UPDATE_FW: + return qla84xx_updatefw(bsg_job); + + case QL_VND_A84_MGMT_CMD: + return qla84xx_mgmt_cmd(bsg_job); + + case QL_VND_IIDMA: + return qla24xx_iidma(bsg_job); + + default: + bsg_job->reply->result = (DID_ERROR << 16); + bsg_job->job_done(bsg_job); + return -ENOSYS; + } +} + +int +qla24xx_bsg_request(struct fc_bsg_job *bsg_job) +{ + int ret = -EINVAL; + + switch (bsg_job->request->msgcode) { + case FC_BSG_RPT_ELS: + case FC_BSG_HST_ELS_NOLOGIN: + ret = qla2x00_process_els(bsg_job); + break; + case FC_BSG_HST_CT: + ret = qla2x00_process_ct(bsg_job); + break; + case FC_BSG_HST_VENDOR: + ret = qla2x00_process_vendor_specific(bsg_job); + break; + case FC_BSG_HST_ADD_RPORT: + case FC_BSG_HST_DEL_RPORT: + case FC_BSG_RPT_CT: + default: + DEBUG2(printk("qla2xxx: unsupported BSG request\n")); + break; + } + return ret; +} + +int +qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job) +{ + scsi_qla_host_t *vha = shost_priv(bsg_job->shost); + struct qla_hw_data *ha = vha->hw; + srb_t *sp; + int cnt, que; + unsigned long flags; + struct req_que *req; + struct srb_bsg *sp_bsg; + + /* find the bsg job from the active list of commands */ + spin_lock_irqsave(&ha->hardware_lock, flags); + for (que = 0; que < ha->max_req_queues; que++) { + req = ha->req_q_map[que]; + if (!req) + continue; + + for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++ ) { + sp = req->outstanding_cmds[cnt]; + + if (sp) { + sp_bsg = (struct srb_bsg*)sp->ctx; + + if (((sp_bsg->ctx.type == SRB_CT_CMD) || + (sp_bsg->ctx.type == SRB_ELS_CMD_HST)) + && (sp_bsg->bsg_job == bsg_job)) { + if (ha->isp_ops->abort_command(sp)) { + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld): mbx abort_command failed\n", vha->host_no)); + bsg_job->req->errors = + bsg_job->reply->result = -EIO; + } else { + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld): mbx abort_command success\n", vha->host_no)); + bsg_job->req->errors = + bsg_job->reply->result = 0; + } + goto done; + } + } + } + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld) SRB not found to abort\n", vha->host_no)); + bsg_job->req->errors = bsg_job->reply->result = -ENXIO; + return 0; + +done: + spin_unlock_irqrestore(&ha->hardware_lock, flags); + if (bsg_job->request->msgcode == FC_BSG_HST_CT) + kfree(sp->fcport); + kfree(sp->ctx); + mempool_free(sp, ha->srb_mempool); + return 0; +} diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h new file mode 100644 index 000000000000..76ed92dd2ef2 --- /dev/null +++ b/drivers/scsi/qla2xxx/qla_bsg.h @@ -0,0 +1,135 @@ +/* + * QLogic Fibre Channel HBA Driver + * Copyright (c) 2003-2008 QLogic Corporation + * + * See LICENSE.qla2xxx for copyright and licensing details. + */ +#ifndef __QLA_BSG_H +#define __QLA_BSG_H + +/* BSG Vendor specific commands */ +#define QL_VND_LOOPBACK 0x01 +#define QL_VND_A84_RESET 0x02 +#define QL_VND_A84_UPDATE_FW 0x03 +#define QL_VND_A84_MGMT_CMD 0x04 +#define QL_VND_IIDMA 0x05 +#define QL_VND_FCP_PRIO_CFG_CMD 0x06 + +/* BSG definations for interpreting CommandSent field */ +#define INT_DEF_LB_LOOPBACK_CMD 0 +#define INT_DEF_LB_ECHO_CMD 1 + +/* BSG Vendor specific definations */ +#define A84_ISSUE_WRITE_TYPE_CMD 0 +#define A84_ISSUE_READ_TYPE_CMD 1 +#define A84_CLEANUP_CMD 2 +#define A84_ISSUE_RESET_OP_FW 3 +#define A84_ISSUE_RESET_DIAG_FW 4 +#define A84_ISSUE_UPDATE_OPFW_CMD 5 +#define A84_ISSUE_UPDATE_DIAGFW_CMD 6 + +struct qla84_mgmt_param { + union { + struct { + uint32_t start_addr; + } mem; /* for QLA84_MGMT_READ/WRITE_MEM */ + struct { + uint32_t id; +#define QLA84_MGMT_CONFIG_ID_UIF 1 +#define QLA84_MGMT_CONFIG_ID_FCOE_COS 2 +#define QLA84_MGMT_CONFIG_ID_PAUSE 3 +#define QLA84_MGMT_CONFIG_ID_TIMEOUTS 4 + + uint32_t param0; + uint32_t param1; + } config; /* for QLA84_MGMT_CHNG_CONFIG */ + + struct { + uint32_t type; +#define QLA84_MGMT_INFO_CONFIG_LOG_DATA 1 /* Get Config Log Data */ +#define QLA84_MGMT_INFO_LOG_DATA 2 /* Get Log Data */ +#define QLA84_MGMT_INFO_PORT_STAT 3 /* Get Port Statistics */ +#define QLA84_MGMT_INFO_LIF_STAT 4 /* Get LIF Statistics */ +#define QLA84_MGMT_INFO_ASIC_STAT 5 /* Get ASIC Statistics */ +#define QLA84_MGMT_INFO_CONFIG_PARAMS 6 /* Get Config Parameters */ +#define QLA84_MGMT_INFO_PANIC_LOG 7 /* Get Panic Log */ + + uint32_t context; +/* +* context definitions for QLA84_MGMT_INFO_CONFIG_LOG_DATA +*/ +#define IC_LOG_DATA_LOG_ID_DEBUG_LOG 0 +#define IC_LOG_DATA_LOG_ID_LEARN_LOG 1 +#define IC_LOG_DATA_LOG_ID_FC_ACL_INGRESS_LOG 2 +#define IC_LOG_DATA_LOG_ID_FC_ACL_EGRESS_LOG 3 +#define IC_LOG_DATA_LOG_ID_ETHERNET_ACL_INGRESS_LOG 4 +#define IC_LOG_DATA_LOG_ID_ETHERNET_ACL_EGRESS_LOG 5 +#define IC_LOG_DATA_LOG_ID_MESSAGE_TRANSMIT_LOG 6 +#define IC_LOG_DATA_LOG_ID_MESSAGE_RECEIVE_LOG 7 +#define IC_LOG_DATA_LOG_ID_LINK_EVENT_LOG 8 +#define IC_LOG_DATA_LOG_ID_DCX_LOG 9 + +/* +* context definitions for QLA84_MGMT_INFO_PORT_STAT +*/ +#define IC_PORT_STATISTICS_PORT_NUMBER_ETHERNET_PORT0 0 +#define IC_PORT_STATISTICS_PORT_NUMBER_ETHERNET_PORT1 1 +#define IC_PORT_STATISTICS_PORT_NUMBER_NSL_PORT0 2 +#define IC_PORT_STATISTICS_PORT_NUMBER_NSL_PORT1 3 +#define IC_PORT_STATISTICS_PORT_NUMBER_FC_PORT0 4 +#define IC_PORT_STATISTICS_PORT_NUMBER_FC_PORT1 5 + + +/* +* context definitions for QLA84_MGMT_INFO_LIF_STAT +*/ +#define IC_LIF_STATISTICS_LIF_NUMBER_ETHERNET_PORT0 0 +#define IC_LIF_STATISTICS_LIF_NUMBER_ETHERNET_PORT1 1 +#define IC_LIF_STATISTICS_LIF_NUMBER_FC_PORT0 2 +#define IC_LIF_STATISTICS_LIF_NUMBER_FC_PORT1 3 +#define IC_LIF_STATISTICS_LIF_NUMBER_CPU 6 + + } info; /* for QLA84_MGMT_GET_INFO */ + } u; +}; + +struct qla84_msg_mgmt { + uint16_t cmd; +#define QLA84_MGMT_READ_MEM 0x00 +#define QLA84_MGMT_WRITE_MEM 0x01 +#define QLA84_MGMT_CHNG_CONFIG 0x02 +#define QLA84_MGMT_GET_INFO 0x03 + uint16_t rsrvd; + struct qla84_mgmt_param mgmtp;/* parameters for cmd */ + uint32_t len; /* bytes in payload following this struct */ + uint8_t payload[0]; /* payload for cmd */ +}; + +struct qla_bsg_a84_mgmt { + struct qla84_msg_mgmt mgmt; +} __attribute__ ((packed)); + +struct qla_scsi_addr { + uint16_t bus; + uint16_t target; +} __attribute__ ((packed)); + +struct qla_ext_dest_addr { + union { + uint8_t wwnn[8]; + uint8_t wwpn[8]; + uint8_t id[4]; + struct qla_scsi_addr scsi_addr; + } dest_addr; + uint16_t dest_type; +#define EXT_DEF_TYPE_WWPN 2 + uint16_t lun; + uint16_t padding[2]; +} __attribute__ ((packed)); + +struct qla_port_param { + struct qla_ext_dest_addr fc_scsi_addr; + uint16_t mode; + uint16_t speed; +} __attribute__ ((packed)); +#endif diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index afa95614aaf8..608397bf7e0a 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -33,6 +33,7 @@ #include #include +#include "qla_bsg.h" #define QLA2XXX_DRIVER_NAME "qla2xxx" /* @@ -2797,128 +2798,4 @@ typedef struct scsi_qla_host { #include "qla_inline.h" #define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr) - -/* - * BSG Vendor specific commands - */ - -#define QL_VND_LOOPBACK 0x01 -#define QLA84_RESET 0x02 -#define QLA84_UPDATE_FW 0x03 -#define QLA84_MGMT_CMD 0x04 - -/* BSG definations for interpreting CommandSent field */ -#define INT_DEF_LB_LOOPBACK_CMD 0 -#define INT_DEF_LB_ECHO_CMD 1 - -/* BSG Vendor specific definations */ -typedef struct _A84_RESET { - uint16_t Flags; - uint16_t Reserved; -#define A84_RESET_FLAG_ENABLE_DIAG_FW 1 -} __attribute__((packed)) A84_RESET, *PA84_RESET; - -#define A84_ISSUE_WRITE_TYPE_CMD 0 -#define A84_ISSUE_READ_TYPE_CMD 1 -#define A84_CLEANUP_CMD 2 -#define A84_ISSUE_RESET_OP_FW 3 -#define A84_ISSUE_RESET_DIAG_FW 4 -#define A84_ISSUE_UPDATE_OPFW_CMD 5 -#define A84_ISSUE_UPDATE_DIAGFW_CMD 6 - -struct qla84_mgmt_param { - union { - struct { - uint32_t start_addr; - } mem; /* for QLA84_MGMT_READ/WRITE_MEM */ - struct { - uint32_t id; -#define QLA84_MGMT_CONFIG_ID_UIF 1 -#define QLA84_MGMT_CONFIG_ID_FCOE_COS 2 -#define QLA84_MGMT_CONFIG_ID_PAUSE 3 -#define QLA84_MGMT_CONFIG_ID_TIMEOUTS 4 - - uint32_t param0; - uint32_t param1; - } config; /* for QLA84_MGMT_CHNG_CONFIG */ - - struct { - uint32_t type; -#define QLA84_MGMT_INFO_CONFIG_LOG_DATA 1 /* Get Config Log Data */ -#define QLA84_MGMT_INFO_LOG_DATA 2 /* Get Log Data */ -#define QLA84_MGMT_INFO_PORT_STAT 3 /* Get Port Statistics */ -#define QLA84_MGMT_INFO_LIF_STAT 4 /* Get LIF Statistics */ -#define QLA84_MGMT_INFO_ASIC_STAT 5 /* Get ASIC Statistics */ -#define QLA84_MGMT_INFO_CONFIG_PARAMS 6 /* Get Config Parameters */ -#define QLA84_MGMT_INFO_PANIC_LOG 7 /* Get Panic Log */ - - uint32_t context; -/* -* context definitions for QLA84_MGMT_INFO_CONFIG_LOG_DATA -*/ -#define IC_LOG_DATA_LOG_ID_DEBUG_LOG 0 -#define IC_LOG_DATA_LOG_ID_LEARN_LOG 1 -#define IC_LOG_DATA_LOG_ID_FC_ACL_INGRESS_LOG 2 -#define IC_LOG_DATA_LOG_ID_FC_ACL_EGRESS_LOG 3 -#define IC_LOG_DATA_LOG_ID_ETHERNET_ACL_INGRESS_LOG 4 -#define IC_LOG_DATA_LOG_ID_ETHERNET_ACL_EGRESS_LOG 5 -#define IC_LOG_DATA_LOG_ID_MESSAGE_TRANSMIT_LOG 6 -#define IC_LOG_DATA_LOG_ID_MESSAGE_RECEIVE_LOG 7 -#define IC_LOG_DATA_LOG_ID_LINK_EVENT_LOG 8 -#define IC_LOG_DATA_LOG_ID_DCX_LOG 9 - -/* -* context definitions for QLA84_MGMT_INFO_PORT_STAT -*/ -#define IC_PORT_STATISTICS_PORT_NUMBER_ETHERNET_PORT0 0 -#define IC_PORT_STATISTICS_PORT_NUMBER_ETHERNET_PORT1 1 -#define IC_PORT_STATISTICS_PORT_NUMBER_NSL_PORT0 2 -#define IC_PORT_STATISTICS_PORT_NUMBER_NSL_PORT1 3 -#define IC_PORT_STATISTICS_PORT_NUMBER_FC_PORT0 4 -#define IC_PORT_STATISTICS_PORT_NUMBER_FC_PORT1 5 - - -/* -* context definitions for QLA84_MGMT_INFO_LIF_STAT -*/ -#define IC_LIF_STATISTICS_LIF_NUMBER_ETHERNET_PORT0 0 -#define IC_LIF_STATISTICS_LIF_NUMBER_ETHERNET_PORT1 1 -#define IC_LIF_STATISTICS_LIF_NUMBER_FC_PORT0 2 -#define IC_LIF_STATISTICS_LIF_NUMBER_FC_PORT1 3 -#define IC_LIF_STATISTICS_LIF_NUMBER_CPU 6 - - } info; /* for QLA84_MGMT_GET_INFO */ - } u; -}; - -struct qla84_msg_mgmt { - uint16_t cmd; -#define QLA84_MGMT_READ_MEM 0x00 -#define QLA84_MGMT_WRITE_MEM 0x01 -#define QLA84_MGMT_CHNG_CONFIG 0x02 -#define QLA84_MGMT_GET_INFO 0x03 - uint16_t rsrvd; - struct qla84_mgmt_param mgmtp;/* parameters for cmd */ - uint32_t len; /* bytes in payload following this struct */ - uint8_t payload[0]; /* payload for cmd */ -}; - -struct msg_update_fw { - /* - * diag_fw = 0 operational fw - * otherwise diagnostic fw - * offset, len, fw_len are present to overcome the current limitation - * of 128Kb xfer size. The fw is sent in smaller chunks. Each chunk - * specifies the byte "offset" where it fits in the fw buffer. The - * number of bytes in each chunk is specified in "len". "fw_len" - * is the total size of fw. The first chunk should start at offset = 0. - * When offset+len == fw_len, the fw is written to the HBA. - */ - uint32_t diag_fw; - uint32_t offset;/* start offset */ - uint32_t len; /* num bytes in cur xfer */ - uint32_t fw_len; /* size of fw in bytes */ - uint8_t fw_bytes[0]; -}; - #endif diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 3a89bc514e2b..c1f1736dcdad 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -459,4 +459,12 @@ extern void qla25xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t); extern void qla25xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t); extern void qla24xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t); +/* BSG related functions */ +extern int qla24xx_bsg_request(struct fc_bsg_job *); +extern int qla24xx_bsg_timeout(struct fc_bsg_job *); +extern int qla84xx_reset_chip(scsi_qla_host_t *, uint16_t); +extern int qla2x00_issue_iocb_timeout(scsi_qla_host_t *, void *, + dma_addr_t, size_t, uint32_t); +extern int qla2x00_get_idma_speed(scsi_qla_host_t *, uint16_t, + uint16_t *, uint16_t *); #endif /* _QLA_GBL_H */ diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 42eb7ffd5942..7f3bc45d2e20 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -711,7 +711,7 @@ qla2x00_verify_checksum(scsi_qla_host_t *vha, uint32_t risc_addr) * Context: * Kernel context. */ -static int +int qla2x00_issue_iocb_timeout(scsi_qla_host_t *vha, void *buffer, dma_addr_t phys_addr, size_t size, uint32_t tov) { @@ -2739,6 +2739,48 @@ qla2x00_read_sfp(scsi_qla_host_t *vha, dma_addr_t sfp_dma, uint16_t addr, return rval; } +int +qla2x00_get_idma_speed(scsi_qla_host_t *vha, uint16_t loop_id, + uint16_t *port_speed, uint16_t *mb) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_IIDMA_CAPABLE(vha->hw)) + return QLA_FUNCTION_FAILED; + + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); + + mcp->mb[0] = MBC_PORT_PARAMS; + mcp->mb[1] = loop_id; + mcp->mb[2] = mcp->mb[3] = 0; + mcp->mb[9] = vha->vp_idx; + mcp->out_mb = MBX_9|MBX_3|MBX_2|MBX_1|MBX_0; + mcp->in_mb = MBX_3|MBX_1|MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + + /* Return mailbox statuses. */ + if (mb != NULL) { + mb[0] = mcp->mb[0]; + mb[1] = mcp->mb[1]; + mb[3] = mcp->mb[3]; + } + + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, + vha->host_no, rval)); + } else { + DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); + if (port_speed) + *port_speed = mcp->mb[3]; + } + + return rval; +} + int qla2x00_set_idma_speed(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t port_speed, uint16_t *mb) @@ -3764,8 +3806,7 @@ qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, uint16_t *mres return rval; } int -qla84xx_reset_chip(scsi_qla_host_t *ha, uint16_t enable_diagnostic, - uint16_t *cmd_status) +qla84xx_reset_chip(scsi_qla_host_t *ha, uint16_t enable_diagnostic) { int rval; mbx_cmd_t mc; @@ -3782,8 +3823,6 @@ qla84xx_reset_chip(scsi_qla_host_t *ha, uint16_t enable_diagnostic, mcp->flags = MBX_DMA_OUT|MBX_DMA_IN|IOCTL_CMD; rval = qla2x00_mailbox_command(ha, mcp); - /* Return mailbox statuses. */ - *cmd_status = mcp->mb[0]; if (rval != QLA_SUCCESS) DEBUG16(printk("%s(%ld): failed=%x.\n", __func__, ha->host_no, rval)); -- cgit v1.2.2 From 09ff701a177b116c6c15b6e501e58fbfb306b424 Mon Sep 17 00:00:00 2001 From: Sarang Radke Date: Fri, 19 Mar 2010 17:03:59 -0700 Subject: [SCSI] qla2xxx: Add APEX support. Allows priority setting for FCP_CMNDs. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_bsg.c | 163 ++++++++++++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_def.h | 7 ++ drivers/scsi/qla2xxx/qla_fw.h | 59 ++++++++++++++ drivers/scsi/qla2xxx/qla_gbl.h | 9 ++- drivers/scsi/qla2xxx/qla_init.c | 168 ++++++++++++++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_mbx.c | 47 +++++++++++ drivers/scsi/qla2xxx/qla_sup.c | 69 ++++++++++++++++- 7 files changed, 518 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index c20292fde720..3c3a86ca6cbd 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -35,6 +35,166 @@ done: return sp; } +int +qla24xx_fcp_prio_cfg_valid(struct qla_fcp_prio_cfg *pri_cfg, uint8_t flag) +{ + int i, ret, num_valid; + uint8_t *bcode; + struct qla_fcp_prio_entry *pri_entry; + + ret = 1; + num_valid = 0; + bcode = (uint8_t *)pri_cfg; + + if (bcode[0x0] != 'H' || bcode[0x1] != 'Q' || bcode[0x2] != 'O' || + bcode[0x3] != 'S') { + return 0; + } + if (flag != 1) + return ret; + + pri_entry = &pri_cfg->entry[0]; + for (i = 0; i < pri_cfg->num_entries; i++) { + if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID) + num_valid++; + pri_entry++; + } + + if (num_valid == 0) + ret = 0; + + return ret; +} + +static int +qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job) +{ + struct Scsi_Host *host = bsg_job->shost; + scsi_qla_host_t *vha = shost_priv(host); + struct qla_hw_data *ha = vha->hw; + int ret = 0; + uint32_t len; + uint32_t oper; + + bsg_job->reply->reply_payload_rcv_len = 0; + + if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || + test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { + ret = -EBUSY; + goto exit_fcp_prio_cfg; + } + + /* Get the sub command */ + oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1]; + + /* Only set config is allowed if config memory is not allocated */ + if (!ha->fcp_prio_cfg && (oper != QLFC_FCP_PRIO_SET_CONFIG)) { + ret = -EINVAL; + goto exit_fcp_prio_cfg; + } + switch (oper) { + case QLFC_FCP_PRIO_DISABLE: + if (ha->flags.fcp_prio_enabled) { + ha->flags.fcp_prio_enabled = 0; + ha->fcp_prio_cfg->attributes &= + ~FCP_PRIO_ATTR_ENABLE; + qla24xx_update_all_fcp_prio(vha); + bsg_job->reply->result = DID_OK; + } else { + ret = -EINVAL; + bsg_job->reply->result = (DID_ERROR << 16); + goto exit_fcp_prio_cfg; + } + break; + + case QLFC_FCP_PRIO_ENABLE: + if (!ha->flags.fcp_prio_enabled) { + if (ha->fcp_prio_cfg) { + ha->flags.fcp_prio_enabled = 1; + ha->fcp_prio_cfg->attributes |= + FCP_PRIO_ATTR_ENABLE; + qla24xx_update_all_fcp_prio(vha); + bsg_job->reply->result = DID_OK; + } else { + ret = -EINVAL; + bsg_job->reply->result = (DID_ERROR << 16); + goto exit_fcp_prio_cfg; + } + } + break; + + case QLFC_FCP_PRIO_GET_CONFIG: + len = bsg_job->reply_payload.payload_len; + if (!len || len > FCP_PRIO_CFG_SIZE) { + ret = -EINVAL; + bsg_job->reply->result = (DID_ERROR << 16); + goto exit_fcp_prio_cfg; + } + + bsg_job->reply->result = DID_OK; + bsg_job->reply->reply_payload_rcv_len = + sg_copy_from_buffer( + bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, ha->fcp_prio_cfg, + len); + + break; + + case QLFC_FCP_PRIO_SET_CONFIG: + len = bsg_job->request_payload.payload_len; + if (!len || len > FCP_PRIO_CFG_SIZE) { + bsg_job->reply->result = (DID_ERROR << 16); + ret = -EINVAL; + goto exit_fcp_prio_cfg; + } + + if (!ha->fcp_prio_cfg) { + ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE); + if (!ha->fcp_prio_cfg) { + qla_printk(KERN_WARNING, ha, + "Unable to allocate memory " + "for fcp prio config data (%x).\n", + FCP_PRIO_CFG_SIZE); + bsg_job->reply->result = (DID_ERROR << 16); + ret = -ENOMEM; + goto exit_fcp_prio_cfg; + } + } + + memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE); + sg_copy_to_buffer(bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, ha->fcp_prio_cfg, + FCP_PRIO_CFG_SIZE); + + /* validate fcp priority data */ + if (!qla24xx_fcp_prio_cfg_valid( + (struct qla_fcp_prio_cfg *) + ha->fcp_prio_cfg, 1)) { + bsg_job->reply->result = (DID_ERROR << 16); + ret = -EINVAL; + /* If buffer was invalidatic int + * fcp_prio_cfg is of no use + */ + vfree(ha->fcp_prio_cfg); + ha->fcp_prio_cfg = NULL; + goto exit_fcp_prio_cfg; + } + + ha->flags.fcp_prio_enabled = 0; + if (ha->fcp_prio_cfg->attributes & FCP_PRIO_ATTR_ENABLE) + ha->flags.fcp_prio_enabled = 1; + qla24xx_update_all_fcp_prio(vha); + bsg_job->reply->result = DID_OK; + break; + default: + ret = -EINVAL; + break; + } +exit_fcp_prio_cfg: + bsg_job->job_done(bsg_job); + return ret; +} static int qla2x00_process_els(struct fc_bsg_job *bsg_job) { @@ -948,6 +1108,9 @@ qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job) case QL_VND_IIDMA: return qla24xx_iidma(bsg_job); + case QL_VND_FCP_PRIO_CFG_CMD: + return qla24xx_proc_fcp_prio_cfg_cmd(bsg_job); + default: bsg_job->reply->result = (DID_ERROR << 16); bsg_job->job_done(bsg_job); diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 608397bf7e0a..c51bd4e5fb44 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -1580,6 +1580,8 @@ typedef struct fc_port { uint16_t loop_id; uint16_t old_loop_id; + uint8_t fcp_prio; + uint8_t fabric_port_name[WWN_SIZE]; uint16_t fp_speed; @@ -2296,6 +2298,7 @@ struct qla_hw_data { uint32_t eeh_busy :1; uint32_t cpu_affinity_enabled :1; uint32_t disable_msix_handshake :1; + uint32_t fcp_prio_enabled :1; } flags; /* This spinlock is used to protect "io transactions", you must @@ -2599,6 +2602,7 @@ struct qla_hw_data { uint32_t flt_region_nvram; uint32_t flt_region_npiv_conf; uint32_t flt_region_gold_fw; + uint32_t flt_region_fcp_prio; /* Needed for BEACON */ uint16_t beacon_blink_led; @@ -2627,6 +2631,9 @@ struct qla_hw_data { struct isp_operations *isp_ops; struct workqueue_struct *wq; struct qlfc_fw fw_buf; + + /* FCP_CMND priority support */ + struct qla_fcp_prio_cfg *fcp_prio_cfg; }; /* diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 42c5587cc50c..a77a2471eaff 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -841,6 +841,8 @@ struct device_reg_24xx { #define FA_HW_EVENT_ENTRY_SIZE 4 #define FA_NPIV_CONF0_ADDR 0x5C000 #define FA_NPIV_CONF1_ADDR 0x5D000 +#define FA_FCP_PRIO0_ADDR 0x10000 +#define FA_FCP_PRIO1_ADDR 0x12000 /* * Flash Error Log Event Codes. @@ -1274,6 +1276,8 @@ struct qla_flt_header { #define FLT_REG_NPIV_CONF_0 0x29 #define FLT_REG_NPIV_CONF_1 0x2a #define FLT_REG_GOLD_FW 0x2f +#define FLT_REG_FCP_PRIO_0 0x87 +#define FLT_REG_FCP_PRIO_1 0x88 struct qla_flt_region { uint32_t code; @@ -1750,6 +1754,61 @@ struct ex_init_cb_81xx { #define FARX_ACCESS_FLASH_CONF_81XX 0x7FFD0000 #define FARX_ACCESS_FLASH_DATA_81XX 0x7F800000 +/* FCP priority config defines *************************************/ +/* operations */ +#define QLFC_FCP_PRIO_DISABLE 0x0 +#define QLFC_FCP_PRIO_ENABLE 0x1 +#define QLFC_FCP_PRIO_GET_CONFIG 0x2 +#define QLFC_FCP_PRIO_SET_CONFIG 0x3 + +struct qla_fcp_prio_entry { + uint16_t flags; /* Describes parameter(s) in FCP */ + /* priority entry that are valid */ +#define FCP_PRIO_ENTRY_VALID 0x1 +#define FCP_PRIO_ENTRY_TAG_VALID 0x2 +#define FCP_PRIO_ENTRY_SPID_VALID 0x4 +#define FCP_PRIO_ENTRY_DPID_VALID 0x8 +#define FCP_PRIO_ENTRY_LUNB_VALID 0x10 +#define FCP_PRIO_ENTRY_LUNE_VALID 0x20 +#define FCP_PRIO_ENTRY_SWWN_VALID 0x40 +#define FCP_PRIO_ENTRY_DWWN_VALID 0x80 + uint8_t tag; /* Priority value */ + uint8_t reserved; /* Reserved for future use */ + uint32_t src_pid; /* Src port id. high order byte */ + /* unused; -1 (wild card) */ + uint32_t dst_pid; /* Src port id. high order byte */ + /* unused; -1 (wild card) */ + uint16_t lun_beg; /* 1st lun num of lun range. */ + /* -1 (wild card) */ + uint16_t lun_end; /* 2nd lun num of lun range. */ + /* -1 (wild card) */ + uint8_t src_wwpn[8]; /* Source WWPN: -1 (wild card) */ + uint8_t dst_wwpn[8]; /* Destination WWPN: -1 (wild card) */ +}; + +struct qla_fcp_prio_cfg { + uint8_t signature[4]; /* "HQOS" signature of config data */ + uint16_t version; /* 1: Initial version */ + uint16_t length; /* config data size in num bytes */ + uint16_t checksum; /* config data bytes checksum */ + uint16_t num_entries; /* Number of entries */ + uint16_t size_of_entry; /* Size of each entry in num bytes */ + uint8_t attributes; /* enable/disable, persistence */ +#define FCP_PRIO_ATTR_DISABLE 0x0 +#define FCP_PRIO_ATTR_ENABLE 0x1 +#define FCP_PRIO_ATTR_PERSIST 0x2 + uint8_t reserved; /* Reserved for future use */ +#define FCP_PRIO_CFG_HDR_SIZE 0x10 + struct qla_fcp_prio_entry entry[1]; /* fcp priority entries */ +#define FCP_PRIO_CFG_ENTRY_SIZE 0x20 +}; + +#define FCP_PRIO_CFG_SIZE (32*1024) /* fcp prio data per port*/ + +/* 25XX Support ****************************************************/ +#define FA_FCP_PRIO0_ADDR_25 0x3C000 +#define FA_FCP_PRIO1_ADDR_25 0x3E000 + /* 81XX Flash locations -- occupies second 2MB region. */ #define FA_BOOT_CODE_ADDR_81 0x80000 #define FA_RISC_CODE_ADDR_81 0xA0000 diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index c1f1736dcdad..5efd4c05c79b 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -328,6 +328,9 @@ extern int qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t); extern int qla2x00_get_data_rate(scsi_qla_host_t *); +extern int qla24xx_set_fcp_prio(scsi_qla_host_t *, uint16_t, uint16_t, + uint16_t *); + /* * Global Function Prototypes in qla_isr.c source file. */ @@ -384,6 +387,7 @@ extern int qla2xxx_get_flash_info(scsi_qla_host_t *); extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t); extern void qla2xxx_flash_npiv_conf(scsi_qla_host_t *); +extern int qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *); /* * Global Function Prototypes in qla_dbg.c source file. @@ -430,7 +434,10 @@ extern void qla2x00_init_host_attr(scsi_qla_host_t *); extern void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *); extern void qla2x00_free_sysfs_attr(scsi_qla_host_t *); extern int qla2x00_loopback_test(scsi_qla_host_t *, struct msg_echo_lb *, uint16_t *); -extern int qla2x00_echo_test(scsi_qla_host_t *, struct msg_echo_lb *, uint16_t *); +extern int qla2x00_echo_test(scsi_qla_host_t *, + struct msg_echo_lb *, uint16_t *); +extern int qla24xx_update_all_fcp_prio(scsi_qla_host_t *); +extern int qla24xx_fcp_prio_cfg_valid(struct qla_fcp_prio_cfg *, uint8_t); /* * Global Function Prototypes in qla_dfs.c source file. diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 4229bb483c5e..e7fe11486bb8 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -349,6 +349,12 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) } } + if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha)) { + if (qla24xx_read_fcp_prio_cfg(vha)) + qla_printk(KERN_ERR, ha, + "Unable to read FCP priority data.\n"); + } + return (rval); } @@ -4905,3 +4911,165 @@ qla81xx_update_fw_options(scsi_qla_host_t *vha) ha->fw_options[2] |= BIT_9; qla2x00_set_fw_options(vha, ha->fw_options); } + +/* + * qla24xx_get_fcp_prio + * Gets the fcp cmd priority value for the logged in port. + * Looks for a match of the port descriptors within + * each of the fcp prio config entries. If a match is found, + * the tag (priority) value is returned. + * + * Input: + * ha = adapter block po + * fcport = port structure pointer. + * + * Return: + * non-zero (if found) + * 0 (if not found) + * + * Context: + * Kernel context + */ +uint8_t +qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport) +{ + int i, entries; + uint8_t pid_match, wwn_match; + uint8_t priority; + uint32_t pid1, pid2; + uint64_t wwn1, wwn2; + struct qla_fcp_prio_entry *pri_entry; + struct qla_hw_data *ha = vha->hw; + + if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled) + return 0; + + priority = 0; + entries = ha->fcp_prio_cfg->num_entries; + pri_entry = &ha->fcp_prio_cfg->entry[0]; + + for (i = 0; i < entries; i++) { + pid_match = wwn_match = 0; + + if (!(pri_entry->flags & FCP_PRIO_ENTRY_VALID)) { + pri_entry++; + continue; + } + + /* check source pid for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_SPID_VALID) { + pid1 = pri_entry->src_pid & INVALID_PORT_ID; + pid2 = vha->d_id.b24 & INVALID_PORT_ID; + if (pid1 == INVALID_PORT_ID) + pid_match++; + else if (pid1 == pid2) + pid_match++; + } + + /* check destination pid for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_DPID_VALID) { + pid1 = pri_entry->dst_pid & INVALID_PORT_ID; + pid2 = fcport->d_id.b24 & INVALID_PORT_ID; + if (pid1 == INVALID_PORT_ID) + pid_match++; + else if (pid1 == pid2) + pid_match++; + } + + /* check source WWN for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_SWWN_VALID) { + wwn1 = wwn_to_u64(vha->port_name); + wwn2 = wwn_to_u64(pri_entry->src_wwpn); + if (wwn2 == (uint64_t)-1) + wwn_match++; + else if (wwn1 == wwn2) + wwn_match++; + } + + /* check destination WWN for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_DWWN_VALID) { + wwn1 = wwn_to_u64(fcport->port_name); + wwn2 = wwn_to_u64(pri_entry->dst_wwpn); + if (wwn2 == (uint64_t)-1) + wwn_match++; + else if (wwn1 == wwn2) + wwn_match++; + } + + if (pid_match == 2 || wwn_match == 2) { + /* Found a matching entry */ + if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID) + priority = pri_entry->tag; + break; + } + + pri_entry++; + } + + return priority; +} + +/* + * qla24xx_update_fcport_fcp_prio + * Activates fcp priority for the logged in fc port + * + * Input: + * ha = adapter block pointer. + * fcp = port structure pointer. + * + * Return: + * QLA_SUCCESS or QLA_FUNCTION_FAILED + * + * Context: + * Kernel context. + */ +int +qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *ha, fc_port_t *fcport) +{ + int ret; + uint8_t priority; + uint16_t mb[5]; + + if (atomic_read(&fcport->state) == FCS_UNCONFIGURED || + fcport->port_type != FCT_TARGET || + fcport->loop_id == FC_NO_LOOP_ID) + return QLA_FUNCTION_FAILED; + + priority = qla24xx_get_fcp_prio(ha, fcport); + ret = qla24xx_set_fcp_prio(ha, fcport->loop_id, priority, mb); + if (ret == QLA_SUCCESS) + fcport->fcp_prio = priority; + else + DEBUG2(printk(KERN_WARNING + "scsi(%ld): Unable to activate fcp priority, " + " ret=0x%x\n", ha->host_no, ret)); + + return ret; +} + +/* + * qla24xx_update_all_fcp_prio + * Activates fcp priority for all the logged in ports + * + * Input: + * ha = adapter block pointer. + * + * Return: + * QLA_SUCCESS or QLA_FUNCTION_FAILED + * + * Context: + * Kernel context. + */ +int +qla24xx_update_all_fcp_prio(scsi_qla_host_t *vha) +{ + int ret; + fc_port_t *fcport; + + ret = QLA_FUNCTION_FAILED; + /* We need to set priority for all logged in ports */ + list_for_each_entry(fcport, &vha->vp_fcports, list) + ret = qla24xx_update_fcport_fcp_prio(vha, fcport); + + return ret; +} diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 7f3bc45d2e20..e9c9f82c1d87 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3896,3 +3896,50 @@ qla2x00_get_data_rate(scsi_qla_host_t *vha) return rval; } + +int +qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority, + uint16_t *mb) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + struct qla_hw_data *ha = vha->hw; + + if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha)) + return QLA_FUNCTION_FAILED; + + DEBUG11(printk(KERN_INFO + "%s(%ld): entered.\n", __func__, ha->host_no)); + + mcp->mb[0] = MBC_PORT_PARAMS; + mcp->mb[1] = loop_id; + if (ha->flags.fcp_prio_enabled) + mcp->mb[2] = BIT_1; + else + mcp->mb[2] = BIT_2; + mcp->mb[4] = priority & 0xf; + mcp->mb[9] = vha->vp_idx; + mcp->out_mb = MBX_9|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; + mcp->in_mb = MBX_4|MBX_3|MBX_1|MBX_0; + mcp->tov = 30; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + if (mb != NULL) { + mb[0] = mcp->mb[0]; + mb[1] = mcp->mb[1]; + mb[3] = mcp->mb[3]; + mb[4] = mcp->mb[4]; + } + + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk(KERN_WARNING + "%s(%ld): failed=%x.\n", __func__, + vha->host_no, rval)); + } else { + DEBUG11(printk(KERN_INFO + "%s(%ld): done.\n", __func__, vha->host_no)); + } + + return rval; +} diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 8b3de4e54c28..f32a4b032967 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -648,6 +648,12 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) const uint32_t def_npiv_conf1[] = { FA_NPIV_CONF1_ADDR_24, FA_NPIV_CONF1_ADDR, FA_NPIV_CONF1_ADDR_81 }; + const uint32_t fcp_prio_cfg0[] = + { FA_FCP_PRIO0_ADDR, FA_FCP_PRIO0_ADDR_25, + 0 }; + const uint32_t fcp_prio_cfg1[] = + { FA_FCP_PRIO1_ADDR, FA_FCP_PRIO1_ADDR_25, + 0 }; uint32_t def; uint16_t *wptr; uint16_t cnt, chksum; @@ -732,6 +738,14 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) case FLT_REG_GOLD_FW: ha->flt_region_gold_fw = start; break; + case FLT_REG_FCP_PRIO_0: + if (!(PCI_FUNC(ha->pdev->devfn) & 1)) + ha->flt_region_fcp_prio = start; + break; + case FLT_REG_FCP_PRIO_1: + if (PCI_FUNC(ha->pdev->devfn) & 1) + ha->flt_region_fcp_prio = start; + break; } } goto done; @@ -750,12 +764,14 @@ no_flash_data: ha->flt_region_boot = def_boot[def]; ha->flt_region_vpd_nvram = def_vpd_nvram[def]; ha->flt_region_vpd = ha->flags.port0 ? - def_vpd0[def]: def_vpd1[def]; + def_vpd0[def] : def_vpd1[def]; ha->flt_region_nvram = ha->flags.port0 ? - def_nvram0[def]: def_nvram1[def]; + def_nvram0[def] : def_nvram1[def]; ha->flt_region_fdt = def_fdt[def]; ha->flt_region_npiv_conf = ha->flags.port0 ? - def_npiv_conf0[def]: def_npiv_conf1[def]; + def_npiv_conf0[def] : def_npiv_conf1[def]; + ha->flt_region_fcp_prio = ha->flags.port0 ? + fcp_prio_cfg0[def] : fcp_prio_cfg1[def]; done: DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x " "vpd_nvram=0x%x vpd=0x%x nvram=0x%x fdt=0x%x flt=0x%x " @@ -2722,3 +2738,50 @@ qla2xxx_get_vpd_field(scsi_qla_host_t *vha, char *key, char *str, size_t size) return 0; } + +int +qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *vha) +{ + int len, max_len; + uint32_t fcp_prio_addr; + struct qla_hw_data *ha = vha->hw; + + if (!ha->fcp_prio_cfg) { + ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE); + if (!ha->fcp_prio_cfg) { + qla_printk(KERN_WARNING, ha, + "Unable to allocate memory for fcp priority data " + "(%x).\n", FCP_PRIO_CFG_SIZE); + return QLA_FUNCTION_FAILED; + } + } + memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE); + + fcp_prio_addr = ha->flt_region_fcp_prio; + + /* first read the fcp priority data header from flash */ + ha->isp_ops->read_optrom(vha, (uint8_t *)ha->fcp_prio_cfg, + fcp_prio_addr << 2, FCP_PRIO_CFG_HDR_SIZE); + + if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 0)) + goto fail; + + /* read remaining FCP CMD config data from flash */ + fcp_prio_addr += (FCP_PRIO_CFG_HDR_SIZE >> 2); + len = ha->fcp_prio_cfg->num_entries * FCP_PRIO_CFG_ENTRY_SIZE; + max_len = FCP_PRIO_CFG_SIZE - FCP_PRIO_CFG_HDR_SIZE; + + ha->isp_ops->read_optrom(vha, (uint8_t *)&ha->fcp_prio_cfg->entry[0], + fcp_prio_addr << 2, (len < max_len ? len : max_len)); + + /* revalidate the entire FCP priority config data, including entries */ + if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 1)) + goto fail; + + ha->flags.fcp_prio_enabled = 1; + return QLA_SUCCESS; +fail: + vfree(ha->fcp_prio_cfg); + ha->fcp_prio_cfg = NULL; + return QLA_FUNCTION_FAILED; +} -- cgit v1.2.2 From d5459083af5b6e01796797edd12555ab586c6092 Mon Sep 17 00:00:00 2001 From: Harish Zunjarrao Date: Fri, 19 Mar 2010 17:04:00 -0700 Subject: [SCSI] qla2xxx: Free DMA memory only if it is allocated in vendor specific BSG command The qla84xx_mgmt_cmd function supports multiple subcommands. Some subcommands require DMA memory and some do not. Therefore check before freeing DMA memory whether it is allocated or not. Signed-off-by: Harish Zunjarrao Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_bsg.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 3c3a86ca6cbd..584c52d134fa 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -804,7 +804,7 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job) int rval = 0; struct qla_bsg_a84_mgmt *ql84_mgmt; uint32_t sg_cnt; - uint32_t data_len; + uint32_t data_len = 0; uint32_t dma_direction = DMA_NONE; if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || @@ -980,9 +980,11 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job) } bsg_job->job_done(bsg_job); - dma_free_coherent(&ha->pdev->dev, data_len, mgmt_b, mgmt_dma); done_unmap_sg: + if (mgmt_b) + dma_free_coherent(&ha->pdev->dev, data_len, mgmt_b, mgmt_dma); + if (dma_direction == DMA_TO_DEVICE) dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); -- cgit v1.2.2 From bfdaa761d3f9663a4721f572e093dd2894cedaf9 Mon Sep 17 00:00:00 2001 From: Sarang Radke Date: Fri, 19 Mar 2010 17:04:01 -0700 Subject: [SCSI] qla2xxx: Fix to make conditional decision based on port number. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_sup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index f32a4b032967..e74552c8c5e1 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -739,11 +739,11 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) ha->flt_region_gold_fw = start; break; case FLT_REG_FCP_PRIO_0: - if (!(PCI_FUNC(ha->pdev->devfn) & 1)) + if (ha->flags.port0) ha->flt_region_fcp_prio = start; break; case FLT_REG_FCP_PRIO_1: - if (PCI_FUNC(ha->pdev->devfn) & 1) + if (!ha->flags.port0) ha->flt_region_fcp_prio = start; break; } -- cgit v1.2.2 From 6c452a45e5d8a93812360a5581e93ac5a8776025 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 19 Mar 2010 17:04:02 -0700 Subject: [SCSI] qla2xxx: General checkpatch corrections. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 6 +-- drivers/scsi/qla2xxx/qla_bsg.c | 95 +++++++++++++++++++++-------------------- drivers/scsi/qla2xxx/qla_init.c | 4 +- drivers/scsi/qla2xxx/qla_mbx.c | 2 +- drivers/scsi/qla2xxx/qla_os.c | 22 +++++++--- 5 files changed, 69 insertions(+), 60 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 90bf7ad42f67..0710e3c8760f 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1177,15 +1177,13 @@ qla24xx_84xx_fw_version_show(struct device *dev, scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); struct qla_hw_data *ha = vha->hw; - if (IS_QLA84XX(ha) && ha->cs84xx) { - if (ha->cs84xx->op_fw_version == 0) { + if (IS_QLA84XX(ha) && ha->cs84xx) + if (ha->cs84xx->op_fw_version == 0) rval = qla84xx_verify_chip(vha, status); - } if ((rval == QLA_SUCCESS) && (status[0] == 0)) return snprintf(buf, PAGE_SIZE, "%u\n", (uint32_t)ha->cs84xx->op_fw_version); - } return snprintf(buf, PAGE_SIZE, "\n"); } diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 584c52d134fa..21e5bcd4bb51 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -274,7 +274,7 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job) if (!vha->flags.online) { DEBUG2(qla_printk(KERN_WARNING, ha, - "host not online\n")); + "host not online\n")); rval = -EIO; goto done; } @@ -286,16 +286,16 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job) rval = -ENOMEM; goto done_free_fcport; } - rsp_sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, - bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); + + rsp_sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); if (!rsp_sg_cnt) { rval = -ENOMEM; goto done_free_fcport; } if ((req_sg_cnt != bsg_job->request_payload.sg_cnt) || - (rsp_sg_cnt != bsg_job->reply_payload.sg_cnt)) - { + (rsp_sg_cnt != bsg_job->reply_payload.sg_cnt)) { DEBUG2(printk(KERN_INFO "dma mapping resulted in different sg counts \ [request_sg_cnt: %x dma_request_sg_cnt: %x\ @@ -310,7 +310,7 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job) sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_bsg)); if (!sp) { rval = -ENOMEM; - goto done_unmap_sg; + goto done_unmap_sg; } els = sp->ctx; @@ -364,10 +364,10 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) struct srb_bsg *ct; /* pass through is supported only for ISP 4Gb or higher */ - if (!IS_FWI2_CAPABLE(ha)) { + if (!IS_FWI2_CAPABLE(ha)) { DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld):Firmware is not capable to support FC " - "CT pass thru\n", vha->host_no)); + "scsi(%ld):Firmware is not capable to support FC " + "CT pass thru\n", vha->host_no)); rval = -EPERM; goto done; } @@ -375,7 +375,7 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) req_sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); - if (!req_sg_cnt) { + if (!req_sg_cnt) { rval = -ENOMEM; goto done; } @@ -388,15 +388,14 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) } if ((req_sg_cnt != bsg_job->request_payload.sg_cnt) || - (rsp_sg_cnt != bsg_job->reply_payload.sg_cnt)) - { + (rsp_sg_cnt != bsg_job->reply_payload.sg_cnt)) { DEBUG2(qla_printk(KERN_WARNING, ha, - "[request_sg_cnt: %x dma_request_sg_cnt: %x\ - reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n", - bsg_job->request_payload.sg_cnt, req_sg_cnt, - bsg_job->reply_payload.sg_cnt, rsp_sg_cnt)); + "[request_sg_cnt: %x dma_request_sg_cnt: %x\ + reply_sg_cnt: %x dma_reply_sg_cnt: %x]\n", + bsg_job->request_payload.sg_cnt, req_sg_cnt, + bsg_job->reply_payload.sg_cnt, rsp_sg_cnt)); rval = -EAGAIN; - goto done_unmap_sg; + goto done_unmap_sg; } if (!vha->flags.online) { @@ -410,17 +409,17 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) (bsg_job->request->rqst_data.h_ct.preamble_word1 & 0xFF000000) >> 24; switch (loop_id) { - case 0xFC: - loop_id = cpu_to_le16(NPH_SNS); - break; - case 0xFA: - loop_id = vha->mgmt_svr_loop_id; - break; - default: - DEBUG2(qla_printk(KERN_INFO, ha, - "Unknown loop id: %x\n", loop_id)); - rval = -EINVAL; - goto done_unmap_sg; + case 0xFC: + loop_id = cpu_to_le16(NPH_SNS); + break; + case 0xFA: + loop_id = vha->mgmt_svr_loop_id; + break; + default: + DEBUG2(qla_printk(KERN_INFO, ha, + "Unknown loop id: %x\n", loop_id)); + rval = -EINVAL; + goto done_unmap_sg; } /* Allocate a dummy fcport structure, since functions preparing the @@ -429,10 +428,9 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) * no fcport structure allocated */ fcport = qla2x00_alloc_fcport(vha, GFP_KERNEL); - if (!fcport) - { + if (!fcport) { rval = -ENOMEM; - goto done_unmap_sg; + goto done_unmap_sg; } /* Initialize all required fields of fcport */ @@ -492,7 +490,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) char *type; struct msg_echo_lb elreq; uint16_t response[MAILBOX_REGISTER_COUNT]; - uint8_t* fw_sts_ptr; + uint8_t *fw_sts_ptr; uint8_t *req_data = NULL; dma_addr_t req_data_dma; uint32_t req_data_len; @@ -524,7 +522,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) if (!elreq.rsp_sg_cnt) { rval = -ENOMEM; goto done_unmap_req_sg; -} + } if ((elreq.req_sg_cnt != bsg_job->request_payload.sg_cnt) || (elreq.rsp_sg_cnt != bsg_job->reply_payload.sg_cnt)) { @@ -586,21 +584,21 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) } else { type = "FC_BSG_HST_VENDOR_ECHO_DIAG"; DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld) bsg rqst type: %s\n" ,vha->host_no, type)); + "scsi(%ld) bsg rqst type: %s\n", vha->host_no, type)); command_sent = INT_DEF_LB_ECHO_CMD; rval = qla2x00_echo_test(vha, &elreq, response); } if (rval) { DEBUG2(qla_printk(KERN_WARNING, ha, "scsi(%ld) Vendor " - "request %s failed\n", vha->host_no, type)); + "request %s failed\n", vha->host_no, type)); fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) + - sizeof(struct fc_bsg_reply); + sizeof(struct fc_bsg_reply); memcpy(fw_sts_ptr, response, sizeof(response)); fw_sts_ptr += sizeof(response); - *fw_sts_ptr = command_sent; + *fw_sts_ptr = command_sent; rval = 0; bsg_job->reply->reply_payload_rcv_len = 0; bsg_job->reply->result = (DID_ERROR << 16); @@ -637,7 +635,7 @@ done_unmap_req_sg: dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); - return rval; + return rval; } static int @@ -975,7 +973,8 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job) bsg_job->reply_payload.payload_len; sg_copy_from_buffer(bsg_job->reply_payload.sg_list, - bsg_job->reply_payload.sg_cnt, mgmt_b, data_len); + bsg_job->reply_payload.sg_cnt, mgmt_b, + data_len); } } @@ -1062,7 +1061,8 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job) if (rval) { DEBUG16(printk(KERN_ERR "scsi(%ld): iIDMA cmd failed for " - "%02x%02x%02x%02x%02x%02x%02x%02x -- %04x %x %04x %04x.\n", + "%02x%02x%02x%02x%02x%02x%02x%02x -- " + "%04x %x %04x %04x.\n", vha->host_no, fcport->port_name[0], fcport->port_name[1], fcport->port_name[2], fcport->port_name[3], @@ -1142,7 +1142,7 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job) default: DEBUG2(printk("qla2xxx: unsupported BSG request\n")); break; - } + } return ret; } @@ -1164,23 +1164,26 @@ qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job) if (!req) continue; - for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++ ) { + for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { sp = req->outstanding_cmds[cnt]; - if (sp) { - sp_bsg = (struct srb_bsg*)sp->ctx; + sp_bsg = (struct srb_bsg *)sp->ctx; if (((sp_bsg->ctx.type == SRB_CT_CMD) || (sp_bsg->ctx.type == SRB_ELS_CMD_HST)) && (sp_bsg->bsg_job == bsg_job)) { if (ha->isp_ops->abort_command(sp)) { DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld): mbx abort_command failed\n", vha->host_no)); + "scsi(%ld): mbx " + "abort_command failed\n", + vha->host_no)); bsg_job->req->errors = bsg_job->reply->result = -EIO; } else { DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld): mbx abort_command success\n", vha->host_no)); + "scsi(%ld): mbx " + "abort_command success\n", + vha->host_no)); bsg_job->req->errors = bsg_job->reply->result = 0; } diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index e7fe11486bb8..8517aa49744a 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -340,7 +340,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) ha->flags.chip_reset_done = 1; if (rval == QLA_SUCCESS && IS_QLA84XX(ha)) { - /* Issue verify 84xx FW IOCB to complete 84xx initialization */ + /* Issue verify 84xx FW IOCB to complete 84xx initialization */ rval = qla84xx_init_chip(vha); if (rval != QLA_SUCCESS) { qla_printk(KERN_ERR, ha, @@ -4924,7 +4924,7 @@ qla81xx_update_fw_options(scsi_qla_host_t *vha) * fcport = port structure pointer. * * Return: - * non-zero (if found) + * non-zero (if found) * 0 (if not found) * * Context: diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index e9c9f82c1d87..bce6cd47e3c3 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3840,7 +3840,7 @@ qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data) mbx_cmd_t *mcp = &mc; if (!IS_FWI2_CAPABLE(vha->hw)) - return QLA_FUNCTION_FAILED; + return QLA_FUNCTION_FAILED; DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 48c37e38ed01..6bdc7de82c5b 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1130,18 +1130,26 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) qla2x00_sp_compl(ha, sp); } else { ctx = sp->ctx; - if (ctx->type == SRB_LOGIN_CMD || ctx->type == SRB_LOGOUT_CMD) { + if (ctx->type == SRB_LOGIN_CMD || + ctx->type == SRB_LOGOUT_CMD) { del_timer_sync(&ctx->timer); ctx->free(sp); } else { - struct srb_bsg* sp_bsg = (struct srb_bsg*)sp->ctx; - if (sp_bsg->bsg_job->request->msgcode == FC_BSG_HST_CT) + struct srb_bsg *sp_bsg = + (struct srb_bsg *)sp->ctx; + struct fc_bsg_job *bsg_job = + sp_bsg->bsg_job; + + if (bsg_job->request->msgcode + == FC_BSG_HST_CT) kfree(sp->fcport); - sp_bsg->bsg_job->req->errors = 0; - sp_bsg->bsg_job->reply->result = res; - sp_bsg->bsg_job->job_done(sp_bsg->bsg_job); + bsg_job->req->errors = 0; + bsg_job->reply->result = res; + bsg_job->job_done( + sp_bsg->bsg_job); kfree(sp->ctx); - mempool_free(sp, ha->srb_mempool); + mempool_free(sp, + ha->srb_mempool); } } } -- cgit v1.2.2 From 7794a5af67c672d44cfdbc7172a608b7542a66e3 Mon Sep 17 00:00:00 2001 From: Ferenc Wagner Date: Tue, 23 Mar 2010 18:14:59 +0100 Subject: [SCSI] qla2xxx: Fix documentation of ql2xfdmienable module parameter The default is enabled since 7e47e5ca184548341a82eeb2238ee3622c43cae1. Signed-off-by: Ferenc Wagner Acked-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 6bdc7de82c5b..f31820691dc2 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -70,8 +70,8 @@ static void qla2x00_free_device(scsi_qla_host_t *); int ql2xfdmienable=1; module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xfdmienable, - "Enables FDMI registratons " - "Default is 0 - no FDMI. 1 - perfom FDMI."); + "Enables FDMI registrations. " + "0 - no FDMI. Default is 1 - perform FDMI."); #define MAX_Q_DEPTH 32 static int ql2xmaxqdepth = MAX_Q_DEPTH; -- cgit v1.2.2 From 2f2eb58762b4dcddfe25c90800323765c1257eca Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Wed, 24 Mar 2010 16:50:30 +0100 Subject: [SCSI] Allow FC LLD to fast-fail scsi eh by introducing new eh return If the scsi eh is running and then a FC LLD calls fc_remote_port_delete, the SCSI commands sent from the eh will fail. To prevent this, a FC LLD can call fc_block_scsi_eh from the eh callback, blocking the eh thread until the dev_loss_tmo fires or the remote port is available again. If (e.g. for a multipathing setup) the dev_loss_tmo is set to a very large value, thus preventing the scsi device removal , the scsi eh can block for a long time. For multipathing, the fast_io_fail_tmo is then set to a low value to detect path problems sooner. This patch introduces a new return code FAST_IO_FAIL. The function fc_block_scsi_eh now returns FAST_IO_FAIL when the fast_io_fail_tmo fires. This indicates that the LLD terminated all pending I/O requests and there are no more pending SCSI commands for the scsi eh to wait for. This return code can be passed back to the scsi eh to stop the escalation and finish the recovery process for this device. Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 15 ++++++++++----- drivers/scsi/scsi_transport_fc.c | 20 +++++++++++++++----- include/scsi/scsi.h | 1 + include/scsi/scsi_transport_fc.h | 2 +- 4 files changed, 27 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index d45c69ca5737..33175974b55a 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -957,9 +957,10 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, "0x%p\n", current->comm, scmd)); rtn = scsi_try_to_abort_cmd(scmd); - if (rtn == SUCCESS) { + if (rtn == SUCCESS || rtn == FAST_IO_FAIL) { scmd->eh_eflags &= ~SCSI_EH_CANCEL_CMD; if (!scsi_device_online(scmd->device) || + rtn == FAST_IO_FAIL || !scsi_eh_tur(scmd)) { scsi_eh_finish_cmd(scmd, done_q); } @@ -1086,8 +1087,9 @@ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, " 0x%p\n", current->comm, sdev)); rtn = scsi_try_bus_device_reset(bdr_scmd); - if (rtn == SUCCESS) { + if (rtn == SUCCESS || rtn == FAST_IO_FAIL) { if (!scsi_device_online(sdev) || + rtn == FAST_IO_FAIL || !scsi_eh_tur(bdr_scmd)) { list_for_each_entry_safe(scmd, next, work_q, eh_entry) { @@ -1150,10 +1152,11 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, "to target %d\n", current->comm, id)); rtn = scsi_try_target_reset(tgtr_scmd); - if (rtn == SUCCESS) { + if (rtn == SUCCESS || rtn == FAST_IO_FAIL) { list_for_each_entry_safe(scmd, next, work_q, eh_entry) { if (id == scmd_id(scmd)) if (!scsi_device_online(scmd->device) || + rtn == FAST_IO_FAIL || !scsi_eh_tur(tgtr_scmd)) scsi_eh_finish_cmd(scmd, done_q); @@ -1209,10 +1212,11 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost, " %d\n", current->comm, channel)); rtn = scsi_try_bus_reset(chan_scmd); - if (rtn == SUCCESS) { + if (rtn == SUCCESS || rtn == FAST_IO_FAIL) { list_for_each_entry_safe(scmd, next, work_q, eh_entry) { if (channel == scmd_channel(scmd)) if (!scsi_device_online(scmd->device) || + rtn == FAST_IO_FAIL || !scsi_eh_tur(scmd)) scsi_eh_finish_cmd(scmd, done_q); @@ -1246,9 +1250,10 @@ static int scsi_eh_host_reset(struct list_head *work_q, , current->comm)); rtn = scsi_try_host_reset(scmd); - if (rtn == SUCCESS) { + if (rtn == SUCCESS || rtn == FAST_IO_FAIL) { list_for_each_entry_safe(scmd, next, work_q, eh_entry) { if (!scsi_device_online(scmd->device) || + rtn == FAST_IO_FAIL || (!scsi_eh_try_stu(scmd) && !scsi_eh_tur(scmd)) || !scsi_eh_tur(scmd)) scsi_eh_finish_cmd(scmd, done_q); diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 55fe730a8606..06813789145c 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3197,23 +3197,33 @@ fc_scsi_scan_rport(struct work_struct *work) * * This routine can be called from a FC LLD scsi_eh callback. It * blocks the scsi_eh thread until the fc_rport leaves the - * FC_PORTSTATE_BLOCKED. This is necessary to avoid the scsi_eh - * failing recovery actions for blocked rports which would lead to - * offlined SCSI devices. + * FC_PORTSTATE_BLOCKED, or the fast_io_fail_tmo fires. This is + * necessary to avoid the scsi_eh failing recovery actions for blocked + * rports which would lead to offlined SCSI devices. + * + * Returns: 0 if the fc_rport left the state FC_PORTSTATE_BLOCKED. + * FAST_IO_FAIL if the fast_io_fail_tmo fired, this should be + * passed back to scsi_eh. */ -void fc_block_scsi_eh(struct scsi_cmnd *cmnd) +int fc_block_scsi_eh(struct scsi_cmnd *cmnd) { struct Scsi_Host *shost = cmnd->device->host; struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device)); unsigned long flags; spin_lock_irqsave(shost->host_lock, flags); - while (rport->port_state == FC_PORTSTATE_BLOCKED) { + while (rport->port_state == FC_PORTSTATE_BLOCKED && + !(rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT)) { spin_unlock_irqrestore(shost->host_lock, flags); msleep(1000); spin_lock_irqsave(shost->host_lock, flags); } spin_unlock_irqrestore(shost->host_lock, flags); + + if (rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT) + return FAST_IO_FAIL; + + return 0; } EXPORT_SYMBOL(fc_block_scsi_eh); diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 8b4deca996ad..832f41f37385 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -423,6 +423,7 @@ static inline int scsi_is_wlun(unsigned int lun) #define ADD_TO_MLQUEUE 0x2006 #define TIMEOUT_ERROR 0x2007 #define SCSI_RETURN_NOT_HANDLED 0x2008 +#define FAST_IO_FAIL 0x2009 /* * Midlevel queue return values. diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 8e86a94faf06..87d81b3ce564 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -807,6 +807,6 @@ void fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number, struct fc_vport *fc_vport_create(struct Scsi_Host *shost, int channel, struct fc_vport_identifiers *); int fc_vport_terminate(struct fc_vport *vport); -void fc_block_scsi_eh(struct scsi_cmnd *cmnd); +int fc_block_scsi_eh(struct scsi_cmnd *cmnd); #endif /* SCSI_TRANSPORT_FC_H */ -- cgit v1.2.2 From a1dbfddd02d2b3e75f8750c68563e1d6eec16260 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Wed, 24 Mar 2010 16:50:31 +0100 Subject: [SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh The return code FAST_IO_FAIL from fc_block_scsi_eh indicates that the pending I/O requests have been terminated as a result of the fast_io_fail_tmo. Pass this return code back to the scsi eh to stop the scsi eh in this case. Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_scsi.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 174b6d57d576..d13eb9a6408a 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -175,7 +175,7 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt) struct zfcp_fsf_req *old_req, *abrt_req; unsigned long flags; unsigned long old_reqid = (unsigned long) scpnt->host_scribble; - int retval = SUCCESS; + int retval = SUCCESS, ret; int retry = 3; char *dbf_tag; @@ -200,7 +200,9 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt) break; zfcp_erp_wait(adapter); - fc_block_scsi_eh(scpnt); + ret = fc_block_scsi_eh(scpnt); + if (ret) + return ret; if (!(atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_RUNNING)) { zfcp_dbf_scsi_abort("nres", adapter->dbf, scpnt, NULL, @@ -231,7 +233,7 @@ static int zfcp_task_mgmt_function(struct scsi_cmnd *scpnt, u8 tm_flags) struct zfcp_unit *unit = scpnt->device->hostdata; struct zfcp_adapter *adapter = unit->port->adapter; struct zfcp_fsf_req *fsf_req = NULL; - int retval = SUCCESS; + int retval = SUCCESS, ret; int retry = 3; while (retry--) { @@ -240,7 +242,10 @@ static int zfcp_task_mgmt_function(struct scsi_cmnd *scpnt, u8 tm_flags) break; zfcp_erp_wait(adapter); - fc_block_scsi_eh(scpnt); + ret = fc_block_scsi_eh(scpnt); + if (ret) + return ret; + if (!(atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_RUNNING)) { zfcp_dbf_scsi_devreset("nres", tm_flags, unit, scpnt); @@ -276,10 +281,13 @@ static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) { struct zfcp_unit *unit = scpnt->device->hostdata; struct zfcp_adapter *adapter = unit->port->adapter; + int ret; zfcp_erp_adapter_reopen(adapter, 0, "schrh_1", scpnt); zfcp_erp_wait(adapter); - fc_block_scsi_eh(scpnt); + ret = fc_block_scsi_eh(scpnt); + if (ret) + return ret; return SUCCESS; } -- cgit v1.2.2 From 2e15efc7e1f99f56896b89fad9d13baac3c635f9 Mon Sep 17 00:00:00 2001 From: Anil Veerabhadrappa Date: Thu, 25 Mar 2010 10:54:40 -0700 Subject: [SCSI] bnx2i: make firmware use statsn field when constructing header instruct firmware to use driver/iscsid provided expected statsn field while constructing login pdu header. Initialize 'flags' to instruct chip to use driver/iscsid provided ExpStatSN value while constructing iSCSI login PDU header Signed-off-by: Eddie Wai Signed-off-by: Anil Veerabhadrappa Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_hwi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 18352ff82101..3a66ca24c7bd 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -347,6 +347,7 @@ int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn, login_wqe->cmd_sn = be32_to_cpu(login_hdr->cmdsn); login_wqe->exp_stat_sn = be32_to_cpu(login_hdr->exp_statsn); + login_wqe->flags = ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN; login_wqe->resp_bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_bd_dma; login_wqe->resp_bd_list_addr_hi = @@ -356,7 +357,6 @@ int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn, (bnx2i_conn->gen_pdu.resp_buf_size << ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT)); login_wqe->resp_buffer = dword; - login_wqe->flags = 0; login_wqe->bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.req_bd_dma; login_wqe->bd_list_addr_hi = (u32) ((u64) bnx2i_conn->gen_pdu.req_bd_dma >> 32); -- cgit v1.2.2 From ce2d763a2cd09513cb0c0e9ea52c30373c00b2f1 Mon Sep 17 00:00:00 2001 From: Anil Veerabhadrappa Date: Thu, 25 Mar 2010 10:54:42 -0700 Subject: [SCSI] bnx2i: link bnx2i hba and cnic device before registering the device When bnx2/cnic/bnx2i drivers are loaded in certain order, bnx2i will will not initialize the device correctly because 'hba->cnic' will be NULL when bnx2i_start() is called from register_device() context. Under this condition 'ifdown' and 'ifup' of associated network interface is required to bring iscsi adapter state to ready state so that it will accept iscsi connection setup within the chip Initializing 'hba->cnic' before calling register_device() will fix this issue Signed-off-by: Michael Chan Signed-off-by: Anil Veerabhadrappa Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 6d8172e781cf..737dce084276 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -278,6 +278,7 @@ static int bnx2i_init_one(struct bnx2i_hba *hba, struct cnic_dev *cnic) int rc; mutex_lock(&bnx2i_dev_lock); + hba->cnic = cnic; rc = cnic->register_device(cnic, CNIC_ULP_ISCSI, hba); if (!rc) { hba->age++; @@ -324,8 +325,7 @@ void bnx2i_ulp_init(struct cnic_dev *dev) if (bnx2i_init_one(hba, dev)) { printk(KERN_ERR "bnx2i - hba %p init failed\n", hba); bnx2i_free_hba(hba); - } else - hba->cnic = dev; + } } -- cgit v1.2.2 From 457549da730ec43bdc594ec7b475464b9d52a15f Mon Sep 17 00:00:00 2001 From: Anil Veerabhadrappa Date: Thu, 25 Mar 2010 10:54:44 -0700 Subject: [SCSI] bnx2i: Update version and module description missing 10G drivers added to description Signed-off-by: Anil Veerabhadrappa Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_init.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 737dce084276..ce0ee80dbea3 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -17,8 +17,8 @@ static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list); static u32 adapter_count; #define DRV_MODULE_NAME "bnx2i" -#define DRV_MODULE_VERSION "2.1.0" -#define DRV_MODULE_RELDATE "Dec 06, 2009" +#define DRV_MODULE_VERSION "2.1.1" +#define DRV_MODULE_RELDATE "Mar 24, 2010" static char version[] __devinitdata = "Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \ @@ -26,7 +26,8 @@ static char version[] __devinitdata = MODULE_AUTHOR("Anil Veerabhadrappa "); -MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709 iSCSI Driver"); +MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709/57710/57711" + " iSCSI Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); -- cgit v1.2.2 From f87146bba523cad0196aa8e80ca9e8243d7a6c0c Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 29 Mar 2010 09:29:24 +0200 Subject: [SCSI] sd: quiet spurious error messages in READ_CAPACITY(16) sd always tries to submit a READ_CAPACITY(16) CDB, regardless whether the host actually supports it. queuecommand() will then return DID_ABORT, which is not qualified enough to detect the true cause here. So better check in sd_try_rc16 first if the cdblen is supported. Signed-off-by: Hannes Reinecke Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 58c62ff42ab3..7955bc226125 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1573,6 +1573,8 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, static int sd_try_rc16_first(struct scsi_device *sdp) { + if (sdp->host->max_cmd_len < 16) + return 0; if (sdp->scsi_level > SCSI_SPC_2) return 1; if (scsi_device_protection(sdp)) -- cgit v1.2.2 From 1469585309bb52869cbaa449c6d2cd1ce9869cca Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 30 Mar 2010 10:52:44 +0530 Subject: [SCSI] mpt2sas : IOs needs to be pause until handles are refreshed for all device after recovery After Host Reset firmware will have new list of device handles for the target. Device handle refresh in driver is part of Rescan topology logic. (See functions like *_search_responding_*). This needs to be done from Host Reset context before making shost_recovery to 0. Currently it is done in Firwmare event context, which may leads IO to a wrong device. Now handler refresh is moved to HBA reset context. Apart from this, Now driver will stop IOs for all device setting deleted flag to 1 at the time of HBA Reset through _scsih_prep_device_scan. It will only unblock devices, if devices has been found as part of RESCAN. This way it will make more safe IO blocking at the time of HBA reset at mpt2sas driver layer. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 49 +++++++++++++++++++++++++++++------- 1 file changed, 40 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index b0d598ec71c0..1f0466aa6c18 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -5505,6 +5505,26 @@ _scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work } } +/** + * _scsih_prep_device_scan - initialize parameters prior to device scan + * @ioc: per adapter object + * + * Set the deleted flag prior to device scan. If the device is found during + * the scan, then we clear the deleted flag. + */ +static void +_scsih_prep_device_scan(struct MPT2SAS_ADAPTER *ioc) +{ + struct MPT2SAS_DEVICE *sas_device_priv_data; + struct scsi_device *sdev; + + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (sas_device_priv_data && sas_device_priv_data->sas_target) + sas_device_priv_data->sas_target->deleted = 1; + } +} + /** * _scsih_mark_responding_sas_device - mark a sas_devices as responding * @ioc: per adapter object @@ -5532,8 +5552,12 @@ _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, sas_device->slot == slot && sas_device->starget) { sas_device->responding = 1; starget = sas_device->starget; - sas_target_priv_data = starget->hostdata; - sas_target_priv_data->tm_busy = 0; + if (starget && starget->hostdata) { + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->tm_busy = 0; + sas_target_priv_data->deleted = 0; + } else + sas_target_priv_data = NULL; starget_printk(KERN_INFO, sas_device->starget, "handle(0x%04x), sas_addr(0x%016llx), enclosure " "logical id(0x%016llx), slot(%d)\n", handle, @@ -5546,7 +5570,8 @@ _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", sas_device->handle); sas_device->handle = handle; - sas_target_priv_data->handle = handle; + if (sas_target_priv_data) + sas_target_priv_data->handle = handle; goto out; } } @@ -5621,6 +5646,12 @@ _scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid, spin_lock_irqsave(&ioc->raid_device_lock, flags); list_for_each_entry(raid_device, &ioc->raid_device_list, list) { if (raid_device->wwid == wwid && raid_device->starget) { + starget = raid_device->starget; + if (starget && starget->hostdata) { + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->deleted = 0; + } else + sas_target_priv_data = NULL; raid_device->responding = 1; starget_printk(KERN_INFO, raid_device->starget, "handle(0x%04x), wwid(0x%016llx)\n", handle, @@ -5630,9 +5661,8 @@ _scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid, printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", raid_device->handle); raid_device->handle = handle; - starget = raid_device->starget; - sas_target_priv_data = starget->hostdata; - sas_target_priv_data->handle = handle; + if (sas_target_priv_data) + sas_target_priv_data->handle = handle; goto out; } } @@ -5857,6 +5887,10 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: " "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); _scsih_sas_host_refresh(ioc); + _scsih_prep_device_scan(ioc); + _scsih_search_responding_sas_devices(ioc); + _scsih_search_responding_raid_devices(ioc); + _scsih_search_responding_expanders(ioc); break; } } @@ -5894,9 +5928,6 @@ _firmware_event_work(struct work_struct *work) } else spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); - _scsih_search_responding_sas_devices(ioc); - _scsih_search_responding_raid_devices(ioc); - _scsih_search_responding_expanders(ioc); _scsih_remove_unresponding_sas_devices(ioc); return; } -- cgit v1.2.2 From 3233ac19811fe17033b537832ca7b59df8bf4aa9 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 1 Apr 2010 10:30:01 -0400 Subject: [SCSI] sd: retry read_capacity on UNIT_ATTENTION Hazard testing uncovered yet another bug in sd. Under heavy reset activity the retry counter might be exhausted and the command will be returned with sense UNIT_ATTENTION/0x29/00 (POWER ON, RESET, OR BUS DEVICE RESET OCCURRED). In those cases we should just increase the retry counter again, retrying one more to clear up this Unit Attention state. [jejb: update to work with RC16 devices and not to loop endlessly] Signed-off-by: Hannes Reinecke Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 7955bc226125..015a597a852e 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1433,6 +1433,8 @@ static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp, #error RC16_LEN must not be more than SD_BUF_SIZE #endif +#define READ_CAPACITY_RETRIES_ON_RESET 10 + static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, unsigned char *buffer) { @@ -1440,7 +1442,7 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, struct scsi_sense_hdr sshdr; int sense_valid = 0; int the_result; - int retries = 3; + int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET; unsigned int alignment; unsigned long long lba; unsigned sector_size; @@ -1469,6 +1471,13 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, * Invalid Field in CDB, just retry * silently with RC10 */ return -EINVAL; + if (sense_valid && + sshdr.sense_key == UNIT_ATTENTION && + sshdr.asc == 0x29 && sshdr.ascq == 0x00) + /* Device reset might occur several times, + * give it one more chance */ + if (--reset_retries > 0) + continue; } retries--; @@ -1527,7 +1536,7 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, struct scsi_sense_hdr sshdr; int sense_valid = 0; int the_result; - int retries = 3; + int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET; sector_t lba; unsigned sector_size; @@ -1543,8 +1552,16 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, if (media_not_present(sdkp, &sshdr)) return -ENODEV; - if (the_result) + if (the_result) { sense_valid = scsi_sense_valid(&sshdr); + if (sense_valid && + sshdr.sense_key == UNIT_ATTENTION && + sshdr.asc == 0x29 && sshdr.ascq == 0x00) + /* Device reset might occur several times, + * give it one more chance */ + if (--reset_retries > 0) + continue; + } retries--; } while (the_result && retries); -- cgit v1.2.2 From 78d4e5a07dca7374dd9db40b3346d727b65eb794 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Thu, 25 Mar 2010 17:29:05 -0400 Subject: [SCSI] scsi_debug: add max_queue + no_uld parameters While testing the midlevel q_at_head and q_at_tail patch for sg and the block SG_IO ioctl I found it useful to reduce the queuing within the scsi_debug driver. The reason is that the midlevel queue only comes into play when the corresponding LLD queue is full. It is also useful when testing to be confident that your program is the only thing issuing commands to the (virtual) scsi_debug device. The no_uld=1 parameter will stop a scsi_debug virtual disk appearing as /dev/sd* . Changelog: - add max_queue parameter to reduce the number of queued commands the driver will accept. This parameter can be changed after the driver is loaded. - add no_uld parameter that restricts scsi_debug's virtual devices to the sg and bsg drivers - correct stale url Signed-off-by: Douglas Gilbert Signed-off-by: James Bottomley --- drivers/scsi/scsi_debug.c | 73 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 3e10c306de94..a783cd33a3e4 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -12,7 +12,7 @@ * SAS disks. * * - * For documentation see http://www.torque.net/sg/sdebug26.html + * For documentation see http://sg.danny.cz/sg/sdebug26.html * * D. Gilbert (dpg) work for Magneto-Optical device test [20010421] * dpg: work for devfs large number of disks [20010809] @@ -58,8 +58,8 @@ #include "sd.h" #include "scsi_logging.h" -#define SCSI_DEBUG_VERSION "1.81" -static const char * scsi_debug_version_date = "20070104"; +#define SCSI_DEBUG_VERSION "1.82" +static const char * scsi_debug_version_date = "20100324"; /* Additional Sense Code (ASC) */ #define NO_ADDITIONAL_SENSE 0x0 @@ -147,12 +147,18 @@ static const char * scsi_debug_version_date = "20070104"; #define SAM2_LUN_ADDRESS_METHOD 0 #define SAM2_WLUN_REPORT_LUNS 0xc101 +/* Can queue up to this number of commands. Typically commands that + * that have a non-zero delay are queued. */ +#define SCSI_DEBUG_CANQUEUE 255 + static int scsi_debug_add_host = DEF_NUM_HOST; static int scsi_debug_delay = DEF_DELAY; static int scsi_debug_dev_size_mb = DEF_DEV_SIZE_MB; static int scsi_debug_every_nth = DEF_EVERY_NTH; static int scsi_debug_max_luns = DEF_MAX_LUNS; +static int scsi_debug_max_queue = SCSI_DEBUG_CANQUEUE; static int scsi_debug_num_parts = DEF_NUM_PARTS; +static int scsi_debug_no_uld = 0; static int scsi_debug_num_tgts = DEF_NUM_TGTS; /* targets per host */ static int scsi_debug_opts = DEF_OPTS; static int scsi_debug_scsi_level = DEF_SCSI_LEVEL; @@ -192,7 +198,6 @@ static int sdebug_sectors_per; /* sectors per cylinder */ #define SDEBUG_SENSE_LEN 32 -#define SCSI_DEBUG_CANQUEUE 255 #define SCSI_DEBUG_MAX_CMD_LEN 32 struct sdebug_dev_info { @@ -2265,7 +2270,7 @@ static void timer_intr_handler(unsigned long indx) struct sdebug_queued_cmd * sqcp; unsigned long iflags; - if (indx >= SCSI_DEBUG_CANQUEUE) { + if (indx >= scsi_debug_max_queue) { printk(KERN_ERR "scsi_debug:timer_intr_handler: indx too " "large\n"); return; @@ -2379,6 +2384,8 @@ static int scsi_debug_slave_configure(struct scsi_device *sdp) scsi_adjust_queue_depth(sdp, SDEBUG_TAGGED_QUEUING, sdp->host->cmd_per_lun); blk_queue_max_segment_size(sdp->request_queue, 256 * 1024); + if (scsi_debug_no_uld) + sdp->no_uld_attach = 1; return 0; } @@ -2405,7 +2412,7 @@ static int stop_queued_cmnd(struct scsi_cmnd *cmnd) struct sdebug_queued_cmd *sqcp; spin_lock_irqsave(&queued_arr_lock, iflags); - for (k = 0; k < SCSI_DEBUG_CANQUEUE; ++k) { + for (k = 0; k < scsi_debug_max_queue; ++k) { sqcp = &queued_arr[k]; if (sqcp->in_use && (cmnd == sqcp->a_cmnd)) { del_timer_sync(&sqcp->cmnd_timer); @@ -2415,7 +2422,7 @@ static int stop_queued_cmnd(struct scsi_cmnd *cmnd) } } spin_unlock_irqrestore(&queued_arr_lock, iflags); - return (k < SCSI_DEBUG_CANQUEUE) ? 1 : 0; + return (k < scsi_debug_max_queue) ? 1 : 0; } /* Deletes (stops) timers of all queued commands */ @@ -2426,7 +2433,7 @@ static void stop_all_queued(void) struct sdebug_queued_cmd *sqcp; spin_lock_irqsave(&queued_arr_lock, iflags); - for (k = 0; k < SCSI_DEBUG_CANQUEUE; ++k) { + for (k = 0; k < scsi_debug_max_queue; ++k) { sqcp = &queued_arr[k]; if (sqcp->in_use && sqcp->a_cmnd) { del_timer_sync(&sqcp->cmnd_timer); @@ -2532,7 +2539,7 @@ static void __init init_all_queued(void) struct sdebug_queued_cmd * sqcp; spin_lock_irqsave(&queued_arr_lock, iflags); - for (k = 0; k < SCSI_DEBUG_CANQUEUE; ++k) { + for (k = 0; k < scsi_debug_max_queue; ++k) { sqcp = &queued_arr[k]; init_timer(&sqcp->cmnd_timer); sqcp->in_use = 0; @@ -2624,12 +2631,12 @@ static int schedule_resp(struct scsi_cmnd * cmnd, struct sdebug_queued_cmd * sqcp = NULL; spin_lock_irqsave(&queued_arr_lock, iflags); - for (k = 0; k < SCSI_DEBUG_CANQUEUE; ++k) { + for (k = 0; k < scsi_debug_max_queue; ++k) { sqcp = &queued_arr[k]; if (! sqcp->in_use) break; } - if (k >= SCSI_DEBUG_CANQUEUE) { + if (k >= scsi_debug_max_queue) { spin_unlock_irqrestore(&queued_arr_lock, iflags); printk(KERN_WARNING "scsi_debug: can_queue exceeded\n"); return 1; /* report busy to mid level */ @@ -2661,7 +2668,9 @@ module_param_named(dsense, scsi_debug_dsense, int, S_IRUGO | S_IWUSR); module_param_named(every_nth, scsi_debug_every_nth, int, S_IRUGO | S_IWUSR); module_param_named(fake_rw, scsi_debug_fake_rw, int, S_IRUGO | S_IWUSR); module_param_named(max_luns, scsi_debug_max_luns, int, S_IRUGO | S_IWUSR); +module_param_named(max_queue, scsi_debug_max_queue, int, S_IRUGO | S_IWUSR); module_param_named(no_lun_0, scsi_debug_no_lun_0, int, S_IRUGO | S_IWUSR); +module_param_named(no_uld, scsi_debug_no_uld, int, S_IRUGO); module_param_named(num_parts, scsi_debug_num_parts, int, S_IRUGO); module_param_named(num_tgts, scsi_debug_num_tgts, int, S_IRUGO | S_IWUSR); module_param_named(opts, scsi_debug_opts, int, S_IRUGO | S_IWUSR); @@ -2694,7 +2703,9 @@ MODULE_PARM_DESC(dsense, "use descriptor sense format(def=0 -> fixed)"); MODULE_PARM_DESC(every_nth, "timeout every nth command(def=0)"); MODULE_PARM_DESC(fake_rw, "fake reads/writes instead of copying (def=0)"); MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)"); +MODULE_PARM_DESC(max_queue, "max number of queued commands (1 to 255(def))"); MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)"); +MODULE_PARM_DESC(no_uld, "stop ULD (e.g. sd driver) attaching (def=0))"); MODULE_PARM_DESC(num_parts, "number of partitions(def=0)"); MODULE_PARM_DESC(num_tgts, "number of targets per host to simulate(def=1)"); MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err... (def=0)"); @@ -2969,6 +2980,31 @@ static ssize_t sdebug_max_luns_store(struct device_driver * ddp, DRIVER_ATTR(max_luns, S_IRUGO | S_IWUSR, sdebug_max_luns_show, sdebug_max_luns_store); +static ssize_t sdebug_max_queue_show(struct device_driver * ddp, char * buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_max_queue); +} +static ssize_t sdebug_max_queue_store(struct device_driver * ddp, + const char * buf, size_t count) +{ + int n; + + if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n > 0) && + (n <= SCSI_DEBUG_CANQUEUE)) { + scsi_debug_max_queue = n; + return count; + } + return -EINVAL; +} +DRIVER_ATTR(max_queue, S_IRUGO | S_IWUSR, sdebug_max_queue_show, + sdebug_max_queue_store); + +static ssize_t sdebug_no_uld_show(struct device_driver * ddp, char * buf) +{ + return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_no_uld); +} +DRIVER_ATTR(no_uld, S_IRUGO, sdebug_no_uld_show, NULL); + static ssize_t sdebug_scsi_level_show(struct device_driver * ddp, char * buf) { return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_scsi_level); @@ -3106,7 +3142,9 @@ static int do_create_driverfs_files(void) ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth); ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_fake_rw); ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_queue); ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_no_lun_0); + ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_no_uld); ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_parts); ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts); ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype); @@ -3138,7 +3176,9 @@ static void do_remove_driverfs_files(void) driver_remove_file(&sdebug_driverfs_driver, &driver_attr_ptype); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_tgts); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_parts); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_no_uld); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_no_lun_0); + driver_remove_file(&sdebug_driverfs_driver, &driver_attr_max_queue); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_max_luns); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_fake_rw); driver_remove_file(&sdebug_driverfs_driver, &driver_attr_every_nth); @@ -3829,12 +3869,13 @@ static int sdebug_driver_probe(struct device * dev) sdbg_host = to_sdebug_host(dev); - hpnt = scsi_host_alloc(&sdebug_driver_template, sizeof(sdbg_host)); - if (NULL == hpnt) { - printk(KERN_ERR "%s: scsi_register failed\n", __func__); - error = -ENODEV; + sdebug_driver_template.can_queue = scsi_debug_max_queue; + hpnt = scsi_host_alloc(&sdebug_driver_template, sizeof(sdbg_host)); + if (NULL == hpnt) { + printk(KERN_ERR "%s: scsi_register failed\n", __func__); + error = -ENODEV; return error; - } + } sdbg_host->shost = hpnt; *((struct sdebug_host_info **)hpnt->hostdata) = sdbg_host; -- cgit v1.2.2 From 38c2911449b19664e0dc46132a7b4cb249ff5e06 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Mon, 5 Apr 2010 14:18:34 +0530 Subject: [SCSI] mpt2sas: sanity added to remove duplicate port from topology There are few special cases which needs to be handled deleting old port. CASE1: In topology you need cascaded expanders. Through sysfs just make sure topology is up. Erase the manufacturing image of the cascaded expander and reset the board. In some cases Adapter will receive Exapnder Add event before expander delete. In such a case, driver needs to delete duplicate port before adding new port. CASE2: Enable Device Missing delay of HBA through lsiutils. If expander or end device is hotswapped with different device before DMD timer expires, driver will get device add for new device first and then device deletion event for the original devices will arrive later at DMD timer expires. In this case also driver need to delete duplicate port before adding port for new device. Added new function which will make sure when new port is added, that its not claiming the same phy resources already in use by another port. If it does, then it will delete the other port before adding the new port. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 2 + drivers/scsi/mpt2sas/mpt2sas_transport.c | 84 ++++++++++++++++++++++++++++++++ 2 files changed, 86 insertions(+) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 2616bb1597b0..454a74a3ec50 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -366,6 +366,7 @@ struct _sas_port { * @phy_id: unique phy id * @handle: device handle for this phy * @attached_handle: device handle for attached device + * @phy_belongs_to_port: port has been created for this phy */ struct _sas_phy { struct list_head port_siblings; @@ -375,6 +376,7 @@ struct _sas_phy { u8 phy_id; u16 handle; u16 attached_handle; + u8 phy_belongs_to_port; }; /** diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index bb2d2c93718b..2727c3b65104 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -465,6 +465,85 @@ _transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc, return rc; } + +/** + * _transport_delete_duplicate_port - (see below description) + * @ioc: per adapter object + * @sas_node: sas node object (either expander or sas host) + * @sas_address: sas address of device being added + * @phy_num: phy number + * + * This function is called when attempting to add a new port that is claiming + * the same phy resources already in use by another port. If we don't release + * the claimed phy resources, the sas transport layer will hang from the BUG + * in sas_port_add_phy. + * + * The reason we would hit this issue is becuase someone is changing the + * sas address of a device on the fly, meanwhile controller firmware sends + * EVENTs out of order when removing the previous instance of the device. + */ +static void +_transport_delete_duplicate_port(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_node, u64 sas_address, int phy_num) +{ + struct _sas_port *mpt2sas_port, *mpt2sas_port_duplicate; + struct _sas_phy *mpt2sas_phy; + + printk(MPT2SAS_ERR_FMT "new device located at sas_addr(0x%016llx), " + "phy_id(%d)\n", ioc->name, (unsigned long long)sas_address, + phy_num); + + mpt2sas_port_duplicate = NULL; + list_for_each_entry(mpt2sas_port, &sas_node->sas_port_list, port_list) { + dev_printk(KERN_ERR, &mpt2sas_port->port->dev, + "existing device at sas_addr(0x%016llx), num_phys(%d)\n", + (unsigned long long) + mpt2sas_port->remote_identify.sas_address, + mpt2sas_port->num_phys); + list_for_each_entry(mpt2sas_phy, &mpt2sas_port->phy_list, + port_siblings) { + dev_printk(KERN_ERR, &mpt2sas_phy->phy->dev, + "phy_number(%d)\n", mpt2sas_phy->phy_id); + if (mpt2sas_phy->phy_id == phy_num) + mpt2sas_port_duplicate = mpt2sas_port; + } + } + + if (!mpt2sas_port_duplicate) + return; + + dev_printk(KERN_ERR, &mpt2sas_port_duplicate->port->dev, + "deleting duplicate device at sas_addr(0x%016llx), phy(%d)!!!!\n", + (unsigned long long) + mpt2sas_port_duplicate->remote_identify.sas_address, phy_num); + ioc->logging_level |= MPT_DEBUG_TRANSPORT; + mpt2sas_transport_port_remove(ioc, + mpt2sas_port_duplicate->remote_identify.sas_address, + sas_node->sas_address); + ioc->logging_level &= ~MPT_DEBUG_TRANSPORT; +} + +/** + * _transport_sanity_check - sanity check when adding a new port + * @ioc: per adapter object + * @sas_node: sas node object (either expander or sas host) + * @sas_address: sas address of device being added + * + * See the explanation above from _transport_delete_duplicate_port + */ +static void +_transport_sanity_check(struct MPT2SAS_ADAPTER *ioc, struct _sas_node *sas_node, + u64 sas_address) +{ + int i; + + for (i = 0; i < sas_node->num_phys; i++) + if (sas_node->phy[i].remote_identify.sas_address == sas_address) + if (sas_node->phy[i].phy_belongs_to_port) + _transport_delete_duplicate_port(ioc, sas_node, + sas_address, i); +} + /** * mpt2sas_transport_port_add - insert port to the list * @ioc: per adapter object @@ -522,6 +601,9 @@ mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle, goto out_fail; } + _transport_sanity_check(ioc, sas_node, + mpt2sas_port->remote_identify.sas_address); + for (i = 0; i < sas_node->num_phys; i++) { if (sas_node->phy[i].remote_identify.sas_address != mpt2sas_port->remote_identify.sas_address) @@ -553,6 +635,7 @@ mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle, mpt2sas_port->remote_identify.sas_address, mpt2sas_phy->phy_id); sas_port_add_phy(port, mpt2sas_phy->phy); + mpt2sas_phy->phy_belongs_to_port = 1; } mpt2sas_port->port = port; @@ -651,6 +734,7 @@ mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, (unsigned long long) mpt2sas_port->remote_identify.sas_address, mpt2sas_phy->phy_id); + mpt2sas_phy->phy_belongs_to_port = 0; sas_port_delete_phy(mpt2sas_port->port, mpt2sas_phy->phy); list_del(&mpt2sas_phy->port_siblings); } -- cgit v1.2.2 From ebda4d38df542e1ff4747c4daadfc7da250b4fa6 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Mon, 5 Apr 2010 14:19:21 +0530 Subject: [SCSI] mpt2sas: Send default descriptor for RAID pass through in mpt2ctl RAID_SCSI_IO_PASSTHROUGH: Driver needs to be sending the default descriptor for RAID Passthru, currently its sending SCSI_IO descriptor. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_ctl.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index ddaa99cdce81..d88e9756d8f5 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -744,8 +744,11 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, mpt2sas_base_get_sense_buffer_dma(ioc, smid); priv_sense = mpt2sas_base_get_sense_buffer(ioc, smid); memset(priv_sense, 0, SCSI_SENSE_BUFFERSIZE); - mpt2sas_base_put_smid_scsi_io(ioc, smid, - le16_to_cpu(mpi_request->FunctionDependent1)); + if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST) + mpt2sas_base_put_smid_scsi_io(ioc, smid, + le16_to_cpu(mpi_request->FunctionDependent1)); + else + mpt2sas_base_put_smid_default(ioc, smid); break; } case MPI2_FUNCTION_SCSI_TASK_MGMT: -- cgit v1.2.2 From ef7c80c1f18f2c5eea2dabd214f12e0c93ac29cf Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Mon, 5 Apr 2010 14:20:07 +0530 Subject: [SCSI] mpt2sas: Added support for PCIe Advanced Error Recovery. Added support in the driver to support EEH and PCIe Advanced Error Recovery. This involves adding new pci_error_handler interface for recovering the controller from PCI Bus errors, such as SERR and PERR. Some tools are available for simulating PCI errors in order to validate this interface: http://www.kernel.org/pub/linux/utils/pci/aer-inject Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 6 ++ drivers/scsi/mpt2sas/mpt2sas_scsih.c | 118 +++++++++++++++++++++++++++++++++++ 2 files changed, 124 insertions(+) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index f980b8822f92..b04ccad7d972 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -58,6 +58,7 @@ #include #include #include +#include #include "mpt2sas_base.h" @@ -1256,6 +1257,9 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc) goto out_fail; } + /* AER (Advanced Error Reporting) hooks */ + pci_enable_pcie_error_reporting(pdev); + pci_set_master(pdev); if (_base_config_dma_addressing(ioc, pdev) != 0) { @@ -1311,6 +1315,7 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc) ioc->chip_phys = 0; ioc->pci_irq = -1; pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); return r; } @@ -3547,6 +3552,7 @@ mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc) ioc->pci_irq = -1; ioc->chip_phys = 0; pci_release_selected_regions(ioc->pdev, ioc->bars); + pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); return; } diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 1f0466aa6c18..bb5659ca128d 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -52,6 +52,7 @@ #include #include #include +#include #include #include @@ -6664,6 +6665,122 @@ _scsih_resume(struct pci_dev *pdev) } #endif /* CONFIG_PM */ +/** + * _scsih_pci_error_detected - Called when a PCI error is detected. + * @pdev: PCI device struct + * @state: PCI channel state + * + * Description: Called when a PCI error is detected. + * + * Return value: + * PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT + */ +static pci_ers_result_t +_scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + printk(MPT2SAS_INFO_FMT "PCI error: detected callback, state(%d)!!\n", + ioc->name, state); + + switch (state) { + case pci_channel_io_normal: + return PCI_ERS_RESULT_CAN_RECOVER; + case pci_channel_io_frozen: + scsi_block_requests(ioc->shost); + mpt2sas_base_stop_watchdog(ioc); + mpt2sas_base_free_resources(ioc); + return PCI_ERS_RESULT_NEED_RESET; + case pci_channel_io_perm_failure: + _scsih_remove(pdev); + return PCI_ERS_RESULT_DISCONNECT; + } + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * _scsih_pci_slot_reset - Called when PCI slot has been reset. + * @pdev: PCI device struct + * + * Description: This routine is called by the pci error recovery + * code after the PCI slot has been reset, just before we + * should resume normal operations. + */ +static pci_ers_result_t +_scsih_pci_slot_reset(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + int rc; + + printk(MPT2SAS_INFO_FMT "PCI error: slot reset callback!!\n", + ioc->name); + + ioc->pdev = pdev; + rc = mpt2sas_base_map_resources(ioc); + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + + rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, + FORCE_BIG_HAMMER); + + printk(MPT2SAS_WARN_FMT "hard reset: %s\n", ioc->name, + (rc == 0) ? "success" : "failed"); + + if (!rc) + return PCI_ERS_RESULT_RECOVERED; + else + return PCI_ERS_RESULT_DISCONNECT; +} + +/** + * _scsih_pci_resume() - resume normal ops after PCI reset + * @pdev: pointer to PCI device + * + * Called when the error recovery driver tells us that its + * OK to resume normal operation. Use completion to allow + * halted scsi ops to resume. + */ +static void +_scsih_pci_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + printk(MPT2SAS_INFO_FMT "PCI error: resume callback!!\n", ioc->name); + + pci_cleanup_aer_uncorrect_error_status(pdev); + mpt2sas_base_start_watchdog(ioc); + scsi_unblock_requests(ioc->shost); +} + +/** + * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers + * @pdev: pointer to PCI device + */ +static pci_ers_result_t +_scsih_pci_mmio_enabled(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + printk(MPT2SAS_INFO_FMT "PCI error: mmio enabled callback!!\n", + ioc->name); + + /* TODO - dump whatever for debugging purposes */ + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +static struct pci_error_handlers _scsih_err_handler = { + .error_detected = _scsih_pci_error_detected, + .mmio_enabled = _scsih_pci_mmio_enabled, + .slot_reset = _scsih_pci_slot_reset, + .resume = _scsih_pci_resume, +}; static struct pci_driver scsih_driver = { .name = MPT2SAS_DRIVER_NAME, @@ -6671,6 +6788,7 @@ static struct pci_driver scsih_driver = { .probe = _scsih_probe, .remove = __devexit_p(_scsih_remove), .shutdown = _scsih_shutdown, + .err_handler = &_scsih_err_handler, #ifdef CONFIG_PM .suspend = _scsih_suspend, .resume = _scsih_resume, -- cgit v1.2.2 From 66a679365780a8d775b1ed03e2576007f7100121 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Mon, 5 Apr 2010 14:21:07 +0530 Subject: [SCSI] mpt2sas: Check for NULL pointer before free_pages is added. Added check before free_pages just to make sure ioc->scsi_lookup is not NULL. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index b04ccad7d972..b830d61684dd 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -1919,7 +1919,10 @@ _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc) ioc->config_page, ioc->config_page_dma); } - free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages); + if (ioc->scsi_lookup) { + free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages); + ioc->scsi_lookup = NULL; + } kfree(ioc->hpr_lookup); kfree(ioc->internal_lookup); } -- cgit v1.2.2 From 40364a40b68a26cc882df05f7cc7f0ad87aac935 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Mon, 5 Apr 2010 14:21:48 +0530 Subject: [SCSI] mpt2sas: Upgrade version 05.100.00.01 Upgraded version string. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 454a74a3ec50..21aa397bf8d8 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -69,11 +69,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "05.100.00.00" +#define MPT2SAS_DRIVER_VERSION "05.100.00.01" #define MPT2SAS_MAJOR_VERSION 05 #define MPT2SAS_MINOR_VERSION 100 #define MPT2SAS_BUILD_VERSION 00 -#define MPT2SAS_RELEASE_VERSION 00 +#define MPT2SAS_RELEASE_VERSION 01 /* * Set MPT2SAS_SG_DEPTH value based on user input. -- cgit v1.2.2 From b19a061a785db22401b62cc4ee2baf95d5c7e2e7 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 6 Apr 2010 14:48:51 -0400 Subject: [SCSI] lpfc 8.3.12: Emulex SLI enhancements - Add the new Logical Link speed event support. - Add RATOV and EDTOV to the REG_VFI mailbox command. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hw.h | 1 + drivers/scsi/lpfc/lpfc_hw4.h | 53 ++++++++++++++++++- drivers/scsi/lpfc/lpfc_init.c | 30 +++++++++++ drivers/scsi/lpfc/lpfc_mbox.c | 2 + drivers/scsi/lpfc/lpfc_sli.c | 116 ++++++++++++++++++++++++++++++++++++------ drivers/scsi/lpfc/lpfc_sli.h | 1 + drivers/scsi/lpfc/lpfc_sli4.h | 4 +- 7 files changed, 187 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 6c71ea416634..6ba1f307ccce 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1500,6 +1500,7 @@ typedef struct { /* FireFly BIU registers */ #define MBXERR_BAD_RCV_LENGTH 14 #define MBXERR_DMA_ERROR 15 #define MBXERR_ERROR 16 +#define MBXERR_UNKNOWN_CMD 18 #define MBXERR_LINK_DOWN 0x33 #define MBX_NOT_FINISHED 255 diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index bff98add80cd..bbdcf96800f6 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -787,6 +787,7 @@ struct mbox_header { #define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37 #define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A #define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D +#define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A /* FCoE Opcodes */ #define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE 0x01 @@ -1108,6 +1109,39 @@ struct lpfc_mbx_mq_create { } u; }; +struct lpfc_mbx_mq_create_ext { + struct mbox_header header; + union { + struct { + uint32_t word0; +#define lpfc_mbx_mq_create_ext_num_pages_SHIFT 0 +#define lpfc_mbx_mq_create_ext_num_pages_MASK 0x0000FFFF +#define lpfc_mbx_mq_create_ext_num_pages_WORD word0 + uint32_t async_evt_bmap; +#define lpfc_mbx_mq_create_ext_async_evt_link_SHIFT LPFC_TRAILER_CODE_LINK +#define lpfc_mbx_mq_create_ext_async_evt_link_MASK 0x00000001 +#define lpfc_mbx_mq_create_ext_async_evt_link_WORD async_evt_bmap +#define lpfc_mbx_mq_create_ext_async_evt_fcfste_SHIFT LPFC_TRAILER_CODE_FCOE +#define lpfc_mbx_mq_create_ext_async_evt_fcfste_MASK 0x00000001 +#define lpfc_mbx_mq_create_ext_async_evt_fcfste_WORD async_evt_bmap +#define lpfc_mbx_mq_create_ext_async_evt_group5_SHIFT LPFC_TRAILER_CODE_GRP5 +#define lpfc_mbx_mq_create_ext_async_evt_group5_MASK 0x00000001 +#define lpfc_mbx_mq_create_ext_async_evt_group5_WORD async_evt_bmap + struct mq_context context; + struct dma_address page[LPFC_MAX_MQ_PAGE]; + } request; + struct { + uint32_t word0; +#define lpfc_mbx_mq_create_q_id_SHIFT 0 +#define lpfc_mbx_mq_create_q_id_MASK 0x0000FFFF +#define lpfc_mbx_mq_create_q_id_WORD word0 + } response; + } u; +#define LPFC_ASYNC_EVENT_LINK_STATE 0x2 +#define LPFC_ASYNC_EVENT_FCF_STATE 0x4 +#define LPFC_ASYNC_EVENT_GROUP5 0x20 +}; + struct lpfc_mbx_mq_destroy { struct mbox_header header; union { @@ -1434,8 +1468,8 @@ struct lpfc_mbx_reg_vfi { #define lpfc_reg_vfi_fcfi_WORD word2 uint32_t wwn[2]; struct ulp_bde64 bde; - uint32_t word8_rsvd; - uint32_t word9_rsvd; + uint32_t e_d_tov; + uint32_t r_a_tov; uint32_t word10; #define lpfc_reg_vfi_nport_id_SHIFT 0 #define lpfc_reg_vfi_nport_id_MASK 0x00FFFFFF @@ -2048,6 +2082,7 @@ struct lpfc_mqe { struct lpfc_mbx_reg_fcfi reg_fcfi; struct lpfc_mbx_unreg_fcfi unreg_fcfi; struct lpfc_mbx_mq_create mq_create; + struct lpfc_mbx_mq_create_ext mq_create_ext; struct lpfc_mbx_eq_create eq_create; struct lpfc_mbx_cq_create cq_create; struct lpfc_mbx_wq_create wq_create; @@ -2106,6 +2141,7 @@ struct lpfc_mcqe { #define LPFC_TRAILER_CODE_LINK 0x1 #define LPFC_TRAILER_CODE_FCOE 0x2 #define LPFC_TRAILER_CODE_DCBX 0x3 +#define LPFC_TRAILER_CODE_GRP5 0x5 }; struct lpfc_acqe_link { @@ -2175,6 +2211,19 @@ struct lpfc_acqe_dcbx { uint32_t trailer; }; +struct lpfc_acqe_grp5 { + uint32_t word0; +#define lpfc_acqe_grp5_pport_SHIFT 0 +#define lpfc_acqe_grp5_pport_MASK 0x000000FF +#define lpfc_acqe_grp5_pport_WORD word0 + uint32_t word1; +#define lpfc_acqe_grp5_llink_spd_SHIFT 16 +#define lpfc_acqe_grp5_llink_spd_MASK 0x0000FFFF +#define lpfc_acqe_grp5_llink_spd_WORD word1 + uint32_t event_tag; + uint32_t trailer; +}; + /* * Define the bootstrap mailbox (bmbx) region used to communicate * mailbox command between the host and port. The mailbox consists diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 56421c714bf8..8341d44fe87b 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -3525,6 +3525,32 @@ lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba, "handled yet\n"); } +/** + * lpfc_sli4_async_grp5_evt - Process the asynchronous group5 event + * @phba: pointer to lpfc hba data structure. + * @acqe_link: pointer to the async grp5 completion queue entry. + * + * This routine is to handle the SLI4 asynchronous grp5 event. A grp5 event + * is an asynchronous notified of a logical link speed change. The Port + * reports the logical link speed in units of 10Mbps. + **/ +static void +lpfc_sli4_async_grp5_evt(struct lpfc_hba *phba, + struct lpfc_acqe_grp5 *acqe_grp5) +{ + uint16_t prev_ll_spd; + + phba->fc_eventTag = acqe_grp5->event_tag; + phba->fcoe_eventtag = acqe_grp5->event_tag; + prev_ll_spd = phba->sli4_hba.link_state.logical_speed; + phba->sli4_hba.link_state.logical_speed = + (bf_get(lpfc_acqe_grp5_llink_spd, acqe_grp5)); + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "2789 GRP5 Async Event: Updating logical link speed " + "from %dMbps to %dMbps\n", (prev_ll_spd * 10), + (phba->sli4_hba.link_state.logical_speed*10)); +} + /** * lpfc_sli4_async_event_proc - Process all the pending asynchronous event * @phba: pointer to lpfc hba data structure. @@ -3561,6 +3587,10 @@ void lpfc_sli4_async_event_proc(struct lpfc_hba *phba) lpfc_sli4_async_dcbx_evt(phba, &cq_event->cqe.acqe_dcbx); break; + case LPFC_TRAILER_CODE_GRP5: + lpfc_sli4_async_grp5_evt(phba, + &cq_event->cqe.acqe_grp5); + break; default: lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "1804 Invalid asynchrous event code: " diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index a6b7f5a0210b..f9b056ec6186 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -1899,6 +1899,8 @@ lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys) memcpy(reg_vfi->wwn, &vport->fc_portname, sizeof(struct lpfc_name)); reg_vfi->wwn[0] = cpu_to_le32(reg_vfi->wwn[0]); reg_vfi->wwn[1] = cpu_to_le32(reg_vfi->wwn[1]); + reg_vfi->e_d_tov = vport->phba->fc_edtov; + reg_vfi->r_a_tov = vport->phba->fc_ratov; reg_vfi->bde.addrHigh = putPaddrHigh(phys); reg_vfi->bde.addrLow = putPaddrLow(phys); reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 2f7018821531..2c88999b7095 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -9833,10 +9833,71 @@ out: return status; } +/** + * lpfc_mq_create_fb_init - Send MCC_CREATE without async events registration + * @phba: HBA structure that indicates port to create a queue on. + * @mq: The queue structure to use to create the mailbox queue. + * @mbox: An allocated pointer to type LPFC_MBOXQ_t + * @cq: The completion queue to associate with this cq. + * + * This function provides failback (fb) functionality when the + * mq_create_ext fails on older FW generations. It's purpose is identical + * to mq_create_ext otherwise. + * + * This routine cannot fail as all attributes were previously accessed and + * initialized in mq_create_ext. + **/ +static void +lpfc_mq_create_fb_init(struct lpfc_hba *phba, struct lpfc_queue *mq, + LPFC_MBOXQ_t *mbox, struct lpfc_queue *cq) +{ + struct lpfc_mbx_mq_create *mq_create; + struct lpfc_dmabuf *dmabuf; + int length; + + length = (sizeof(struct lpfc_mbx_mq_create) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_MQ_CREATE, + length, LPFC_SLI4_MBX_EMBED); + mq_create = &mbox->u.mqe.un.mq_create; + bf_set(lpfc_mbx_mq_create_num_pages, &mq_create->u.request, + mq->page_count); + bf_set(lpfc_mq_context_cq_id, &mq_create->u.request.context, + cq->queue_id); + bf_set(lpfc_mq_context_valid, &mq_create->u.request.context, 1); + switch (mq->entry_count) { + case 16: + bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + LPFC_MQ_CNT_16); + break; + case 32: + bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + LPFC_MQ_CNT_32); + break; + case 64: + bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + LPFC_MQ_CNT_64); + break; + case 128: + bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + LPFC_MQ_CNT_128); + break; + } + list_for_each_entry(dmabuf, &mq->page_list, list) { + mq_create->u.request.page[dmabuf->buffer_tag].addr_lo = + putPaddrLow(dmabuf->phys); + mq_create->u.request.page[dmabuf->buffer_tag].addr_hi = + putPaddrHigh(dmabuf->phys); + } +} + /** * lpfc_mq_create - Create a mailbox Queue on the HBA * @phba: HBA structure that indicates port to create a queue on. * @mq: The queue structure to use to create the mailbox queue. + * @cq: The completion queue to associate with this cq. + * @subtype: The queue's subtype. * * This function creates a mailbox queue, as detailed in @mq, on a port, * described by @phba by sending a MQ_CREATE mailbox command to the HBA. @@ -9852,31 +9913,40 @@ out: * memory this function will return ENOMEM. If the queue create mailbox command * fails this function will return ENXIO. **/ -uint32_t +int32_t lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq, struct lpfc_queue *cq, uint32_t subtype) { struct lpfc_mbx_mq_create *mq_create; + struct lpfc_mbx_mq_create_ext *mq_create_ext; struct lpfc_dmabuf *dmabuf; LPFC_MBOXQ_t *mbox; int rc, length, status = 0; uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mbox) return -ENOMEM; - length = (sizeof(struct lpfc_mbx_mq_create) - + length = (sizeof(struct lpfc_mbx_mq_create_ext) - sizeof(struct lpfc_sli4_cfg_mhdr)); lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, - LPFC_MBOX_OPCODE_MQ_CREATE, + LPFC_MBOX_OPCODE_MQ_CREATE_EXT, length, LPFC_SLI4_MBX_EMBED); - mq_create = &mbox->u.mqe.un.mq_create; - bf_set(lpfc_mbx_mq_create_num_pages, &mq_create->u.request, + + mq_create_ext = &mbox->u.mqe.un.mq_create_ext; + bf_set(lpfc_mbx_mq_create_ext_num_pages, &mq_create_ext->u.request, mq->page_count); - bf_set(lpfc_mq_context_cq_id, &mq_create->u.request.context, - cq->queue_id); - bf_set(lpfc_mq_context_valid, &mq_create->u.request.context, 1); + bf_set(lpfc_mbx_mq_create_ext_async_evt_link, &mq_create_ext->u.request, + 1); + bf_set(lpfc_mbx_mq_create_ext_async_evt_fcfste, + &mq_create_ext->u.request, 1); + bf_set(lpfc_mbx_mq_create_ext_async_evt_group5, + &mq_create_ext->u.request, 1); + bf_set(lpfc_mq_context_cq_id, &mq_create_ext->u.request.context, + cq->queue_id); + bf_set(lpfc_mq_context_valid, &mq_create_ext->u.request.context, 1); switch (mq->entry_count) { default: lpfc_printf_log(phba, KERN_ERR, LOG_SLI, @@ -9886,31 +9956,46 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq, return -EINVAL; /* otherwise default to smallest count (drop through) */ case 16: - bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + bf_set(lpfc_mq_context_count, &mq_create_ext->u.request.context, LPFC_MQ_CNT_16); break; case 32: - bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + bf_set(lpfc_mq_context_count, &mq_create_ext->u.request.context, LPFC_MQ_CNT_32); break; case 64: - bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + bf_set(lpfc_mq_context_count, &mq_create_ext->u.request.context, LPFC_MQ_CNT_64); break; case 128: - bf_set(lpfc_mq_context_count, &mq_create->u.request.context, + bf_set(lpfc_mq_context_count, &mq_create_ext->u.request.context, LPFC_MQ_CNT_128); break; } list_for_each_entry(dmabuf, &mq->page_list, list) { - mq_create->u.request.page[dmabuf->buffer_tag].addr_lo = + mq_create_ext->u.request.page[dmabuf->buffer_tag].addr_lo = putPaddrLow(dmabuf->phys); - mq_create->u.request.page[dmabuf->buffer_tag].addr_hi = + mq_create_ext->u.request.page[dmabuf->buffer_tag].addr_hi = putPaddrHigh(dmabuf->phys); } rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + shdr = (union lpfc_sli4_cfg_shdr *) &mq_create_ext->header.cfg_shdr; + mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id, + &mq_create_ext->u.response); + if (rc != MBX_SUCCESS) { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "2795 MQ_CREATE_EXT failed with " + "status x%x. Failback to MQ_CREATE.\n", + rc); + lpfc_mq_create_fb_init(phba, mq, mbox, cq); + mq_create = &mbox->u.mqe.un.mq_create; + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + shdr = (union lpfc_sli4_cfg_shdr *) &mq_create->header.cfg_shdr; + mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id, + &mq_create->u.response); + } + /* The IOCTL status is embedded in the mailbox subheader. */ - shdr = (union lpfc_sli4_cfg_shdr *) &mq_create->header.cfg_shdr; shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); if (shdr_status || shdr_add_status || rc) { @@ -9921,7 +10006,6 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq, status = -ENXIO; goto out; } - mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id, &mq_create->u.response); if (mq->queue_id == 0xFFFF) { status = -ENXIO; goto out; diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 54a5e0bc827f..e3792151ca06 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -36,6 +36,7 @@ struct lpfc_cq_event { struct lpfc_acqe_link acqe_link; struct lpfc_acqe_fcoe acqe_fcoe; struct lpfc_acqe_dcbx acqe_dcbx; + struct lpfc_acqe_grp5 acqe_grp5; struct lpfc_rcqe rcqe_cmpl; struct sli4_wcqe_xri_aborted wcqe_axri; struct lpfc_wcqe_complete wcqe_cmpl; diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 5b6cb9742c58..58bb4c81b54e 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -493,8 +493,8 @@ void lpfc_sli4_queue_free(struct lpfc_queue *); uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint16_t); uint32_t lpfc_cq_create(struct lpfc_hba *, struct lpfc_queue *, struct lpfc_queue *, uint32_t, uint32_t); -uint32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *, - struct lpfc_queue *, uint32_t); +int32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *, + struct lpfc_queue *, uint32_t); uint32_t lpfc_wq_create(struct lpfc_hba *, struct lpfc_queue *, struct lpfc_queue *, uint32_t); uint32_t lpfc_rq_create(struct lpfc_hba *, struct lpfc_queue *, -- cgit v1.2.2 From 15672319e3da68bb3f710e724185f4524722a6fa Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 6 Apr 2010 14:49:03 -0400 Subject: [SCSI] lpfc 8.3.12: Miscellaneous Changes - Prevent log message 1801 during vport delete. - Enable NPIV by default. - Display correct value for max Vports on SLI4 HBAs. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 18 ++++++++++++------ drivers/scsi/lpfc/lpfc_vport.c | 4 +++- 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 5df15c65b35b..2e5f376d9ccc 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -869,6 +869,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq; MAILBOX_t *pmb; int rc = 0; + uint32_t max_vpi; /* * prevent udev from issuing mailbox commands until the port is @@ -916,11 +917,17 @@ lpfc_get_hba_info(struct lpfc_hba *phba, if (axri) *axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) - phba->sli4_hba.max_cfg_param.xri_used; + + /* Account for differences with SLI-3. Get vpi count from + * mailbox data and subtract one for max vpi value. + */ + max_vpi = (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) > 0) ? + (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) - 1) : 0; + if (mvpi) - *mvpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config); + *mvpi = max_vpi; if (avpi) - *avpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) - - phba->sli4_hba.max_cfg_param.vpi_used; + *avpi = max_vpi - phba->sli4_hba.max_cfg_param.vpi_used; } else { if (mrpi) *mrpi = pmb->un.varRdConfig.max_rpi; @@ -1925,13 +1932,12 @@ MODULE_PARM_DESC(lpfc_sli_mode, "SLI mode selector:" " 2 - select SLI-2 even on SLI-3 capable HBAs," " 3 - select SLI-3"); -int lpfc_enable_npiv = 0; +int lpfc_enable_npiv = 1; module_param(lpfc_enable_npiv, int, 0); MODULE_PARM_DESC(lpfc_enable_npiv, "Enable NPIV functionality"); lpfc_param_show(enable_npiv); lpfc_param_init(enable_npiv, 1, 0, 1); -static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, - lpfc_enable_npiv_show, NULL); +static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, lpfc_enable_npiv_show, NULL); /* # lpfc_suppress_link_up: Bring link up at initialization diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index ffd575c379f3..ab91359bde20 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -763,7 +763,9 @@ lpfc_create_vport_work_array(struct lpfc_hba *phba) spin_lock_irq(&phba->hbalock); list_for_each_entry(port_iterator, &phba->port_list, listentry) { if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) { - lpfc_printf_vlog(port_iterator, KERN_WARNING, LOG_VPORT, + if (!(port_iterator->load_flag & FC_UNLOADING)) + lpfc_printf_vlog(port_iterator, KERN_ERR, + LOG_VPORT, "1801 Create vport work array FAILED: " "cannot do scsi_host_get\n"); continue; -- cgit v1.2.2 From 6c8eea54ec62c1a3fdb21de583639c49dcdc8811 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 6 Apr 2010 14:49:53 -0400 Subject: [SCSI] lpfc 8.3.12: T10-PI/DIF changes Update driver for change in T10-PI interface on adapter - Remove Profiles. - Add new SLI Opcodes. - Add new PDE structures used for BlockGuard. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hw.h | 167 +++++++++++++++++++----------------------- drivers/scsi/lpfc/lpfc_scsi.c | 149 ++++++++++++++++++++++++------------- 2 files changed, 177 insertions(+), 139 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 6ba1f307ccce..0cf9a2bd3469 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1500,7 +1500,6 @@ typedef struct { /* FireFly BIU registers */ #define MBXERR_BAD_RCV_LENGTH 14 #define MBXERR_DMA_ERROR 15 #define MBXERR_ERROR 16 -#define MBXERR_UNKNOWN_CMD 18 #define MBXERR_LINK_DOWN 0x33 #define MBX_NOT_FINISHED 255 @@ -1566,95 +1565,83 @@ enum lpfc_protgrp_type { }; /* PDE Descriptors */ -#define LPFC_PDE1_DESCRIPTOR 0x81 -#define LPFC_PDE2_DESCRIPTOR 0x82 -#define LPFC_PDE3_DESCRIPTOR 0x83 - -/* BlockGuard Profiles */ -enum lpfc_bg_prof_codes { - LPFC_PROF_INVALID, - LPFC_PROF_A1 = 128, /* Full Protection */ - LPFC_PROF_A2, /* Disabled Protection Checks:A2~A4 */ - LPFC_PROF_A3, - LPFC_PROF_A4, - LPFC_PROF_B1, /* Embedded DIFs: B1~B3 */ - LPFC_PROF_B2, - LPFC_PROF_B3, - LPFC_PROF_C1, /* Separate DIFs: C1~C3 */ - LPFC_PROF_C2, - LPFC_PROF_C3, - LPFC_PROF_D1, /* Full Protection */ - LPFC_PROF_D2, /* Partial Protection & Check Disabling */ - LPFC_PROF_D3, - LPFC_PROF_E1, /* E1~E4:out - check-only, in - update apptag */ - LPFC_PROF_E2, - LPFC_PROF_E3, - LPFC_PROF_E4, - LPFC_PROF_F1, /* Full Translation - F1 Prot Descriptor */ - /* F1 Translation BDE */ - LPFC_PROF_ANT1, /* TCP checksum, DIF inline with data buffers */ - LPFC_PROF_AST1, /* TCP checksum, DIF split from data buffer */ - LPFC_PROF_ANT2, - LPFC_PROF_AST2 +#define LPFC_PDE5_DESCRIPTOR 0x85 +#define LPFC_PDE6_DESCRIPTOR 0x86 +#define LPFC_PDE7_DESCRIPTOR 0x87 + +/* BlockGuard Opcodes */ +#define BG_OP_IN_NODIF_OUT_CRC 0x0 +#define BG_OP_IN_CRC_OUT_NODIF 0x1 +#define BG_OP_IN_NODIF_OUT_CSUM 0x2 +#define BG_OP_IN_CSUM_OUT_NODIF 0x3 +#define BG_OP_IN_CRC_OUT_CRC 0x4 +#define BG_OP_IN_CSUM_OUT_CSUM 0x5 +#define BG_OP_IN_CRC_OUT_CSUM 0x6 +#define BG_OP_IN_CSUM_OUT_CRC 0x7 + +struct lpfc_pde5 { + uint32_t word0; +#define pde5_type_SHIFT 24 +#define pde5_type_MASK 0x000000ff +#define pde5_type_WORD word0 +#define pde5_rsvd0_SHIFT 0 +#define pde5_rsvd0_MASK 0x00ffffff +#define pde5_rsvd0_WORD word0 + uint32_t reftag; /* Reference Tag Value */ + uint32_t reftagtr; /* Reference Tag Translation Value */ }; -/* BlockGuard error-control defines */ -#define BG_EC_STOP_ERR 0x00 -#define BG_EC_CONT_ERR 0x01 -#define BG_EC_IGN_UNINIT_STOP_ERR 0x10 -#define BG_EC_IGN_UNINIT_CONT_ERR 0x11 - -/* PDE (Protection Descriptor Entry) word 0 bit masks and shifts */ -#define PDE_DESC_TYPE_MASK 0xff000000 -#define PDE_DESC_TYPE_SHIFT 24 -#define PDE_BG_PROFILE_MASK 0x00ff0000 -#define PDE_BG_PROFILE_SHIFT 16 -#define PDE_BLOCK_LEN_MASK 0x0000fffc -#define PDE_BLOCK_LEN_SHIFT 2 -#define PDE_ERR_CTRL_MASK 0x00000003 -#define PDE_ERR_CTRL_SHIFT 0 -/* PDE word 1 bit masks and shifts */ -#define PDE_APPTAG_MASK_MASK 0xffff0000 -#define PDE_APPTAG_MASK_SHIFT 16 -#define PDE_APPTAG_VAL_MASK 0x0000ffff -#define PDE_APPTAG_VAL_SHIFT 0 -struct lpfc_pde { - uint32_t parms; /* bitfields of descriptor, prof, len, and ec */ - uint32_t apptag; /* bitfields of app tag maskand app tag value */ - uint32_t reftag; /* reference tag occupying all 32 bits */ +struct lpfc_pde6 { + uint32_t word0; +#define pde6_type_SHIFT 24 +#define pde6_type_MASK 0x000000ff +#define pde6_type_WORD word0 +#define pde6_rsvd0_SHIFT 0 +#define pde6_rsvd0_MASK 0x00ffffff +#define pde6_rsvd0_WORD word0 + uint32_t word1; +#define pde6_rsvd1_SHIFT 26 +#define pde6_rsvd1_MASK 0x0000003f +#define pde6_rsvd1_WORD word1 +#define pde6_na_SHIFT 25 +#define pde6_na_MASK 0x00000001 +#define pde6_na_WORD word1 +#define pde6_rsvd2_SHIFT 16 +#define pde6_rsvd2_MASK 0x000001FF +#define pde6_rsvd2_WORD word1 +#define pde6_apptagtr_SHIFT 0 +#define pde6_apptagtr_MASK 0x0000ffff +#define pde6_apptagtr_WORD word1 + uint32_t word2; +#define pde6_optx_SHIFT 28 +#define pde6_optx_MASK 0x0000000f +#define pde6_optx_WORD word2 +#define pde6_oprx_SHIFT 24 +#define pde6_oprx_MASK 0x0000000f +#define pde6_oprx_WORD word2 +#define pde6_nr_SHIFT 23 +#define pde6_nr_MASK 0x00000001 +#define pde6_nr_WORD word2 +#define pde6_ce_SHIFT 22 +#define pde6_ce_MASK 0x00000001 +#define pde6_ce_WORD word2 +#define pde6_re_SHIFT 21 +#define pde6_re_MASK 0x00000001 +#define pde6_re_WORD word2 +#define pde6_ae_SHIFT 20 +#define pde6_ae_MASK 0x00000001 +#define pde6_ae_WORD word2 +#define pde6_ai_SHIFT 19 +#define pde6_ai_MASK 0x00000001 +#define pde6_ai_WORD word2 +#define pde6_bs_SHIFT 16 +#define pde6_bs_MASK 0x00000007 +#define pde6_bs_WORD word2 +#define pde6_apptagval_SHIFT 0 +#define pde6_apptagval_MASK 0x0000ffff +#define pde6_apptagval_WORD word2 }; -/* inline function to set fields in parms of PDE */ -static inline void -lpfc_pde_set_bg_parms(struct lpfc_pde *p, u8 desc, u8 prof, u16 len, u8 ec) -{ - uint32_t *wp = &p->parms; - - /* spec indicates that adapter appends two 0's to length field */ - len = len >> 2; - - *wp &= 0; - *wp |= ((desc << PDE_DESC_TYPE_SHIFT) & PDE_DESC_TYPE_MASK); - *wp |= ((prof << PDE_BG_PROFILE_SHIFT) & PDE_BG_PROFILE_MASK); - *wp |= ((len << PDE_BLOCK_LEN_SHIFT) & PDE_BLOCK_LEN_MASK); - *wp |= ((ec << PDE_ERR_CTRL_SHIFT) & PDE_ERR_CTRL_MASK); - *wp = le32_to_cpu(*wp); -} - -/* inline function to set apptag and reftag fields of PDE */ -static inline void -lpfc_pde_set_dif_parms(struct lpfc_pde *p, u16 apptagmask, u16 apptagval, - u32 reftag) -{ - uint32_t *wp = &p->apptag; - *wp &= 0; - *wp |= ((apptagmask << PDE_APPTAG_MASK_SHIFT) & PDE_APPTAG_MASK_MASK); - *wp |= ((apptagval << PDE_APPTAG_VAL_SHIFT) & PDE_APPTAG_VAL_MASK); - *wp = le32_to_cpu(*wp); - wp = &p->reftag; - *wp = le32_to_cpu(reftag); -} - /* Structure for MB Command LOAD_SM and DOWN_LOAD */ @@ -2488,8 +2475,8 @@ typedef struct { #define DMP_VPORT_REGION_SIZE 0x200 #define DMP_MBOX_OFFSET_WORD 0x5 -#define DMP_REGION_23 0x17 /* fcoe param and port state region */ -#define DMP_RGN23_SIZE 0x400 +#define DMP_REGION_23 0x17 /* fcoe param and port state region */ +#define DMP_RGN23_SIZE 0x400 #define WAKE_UP_PARMS_REGION_ID 4 #define WAKE_UP_PARMS_WORD_SIZE 15 @@ -2504,9 +2491,9 @@ struct vport_rec { #define VPORT_INFO_REV 0x1 #define MAX_STATIC_VPORT_COUNT 16 struct static_vport_info { - uint32_t signature; + uint32_t signature; uint32_t rev; - struct vport_rec vport_list[MAX_STATIC_VPORT_COUNT]; + struct vport_rec vport_list[MAX_STATIC_VPORT_COUNT]; uint32_t resvd[66]; }; diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index dccdb822328c..f4a3b2e79eea 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1141,37 +1141,47 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) } /* - * Given a scsi cmnd, determine the BlockGuard profile to be used - * with the cmd + * Given a scsi cmnd, determine the BlockGuard opcodes to be used with it + * @sc: The SCSI command to examine + * @txopt: (out) BlockGuard operation for transmitted data + * @rxopt: (out) BlockGuard operation for received data + * + * Returns: zero on success; non-zero if tx and/or rx op cannot be determined + * */ static int -lpfc_sc_to_sli_prof(struct lpfc_hba *phba, struct scsi_cmnd *sc) +lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, + uint8_t *txop, uint8_t *rxop) { uint8_t guard_type = scsi_host_get_guard(sc->device->host); - uint8_t ret_prof = LPFC_PROF_INVALID; + uint8_t ret = 0; if (guard_type == SHOST_DIX_GUARD_IP) { switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: - ret_prof = LPFC_PROF_AST2; + *txop = BG_OP_IN_CSUM_OUT_NODIF; + *rxop = BG_OP_IN_NODIF_OUT_CSUM; break; case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - ret_prof = LPFC_PROF_A1; + *txop = BG_OP_IN_NODIF_OUT_CRC; + *rxop = BG_OP_IN_CRC_OUT_NODIF; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - ret_prof = LPFC_PROF_AST1; + *txop = BG_OP_IN_CSUM_OUT_CRC; + *rxop = BG_OP_IN_CRC_OUT_CSUM; break; case SCSI_PROT_NORMAL: default: lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9063 BLKGRD:Bad op/guard:%d/%d combination\n", + "9063 BLKGRD: Bad op/guard:%d/%d combination\n", scsi_get_prot_op(sc), guard_type); + ret = 1; break; } @@ -1179,12 +1189,14 @@ lpfc_sc_to_sli_prof(struct lpfc_hba *phba, struct scsi_cmnd *sc) switch (scsi_get_prot_op(sc)) { case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: - ret_prof = LPFC_PROF_A1; + *txop = BG_OP_IN_NODIF_OUT_CRC; + *rxop = BG_OP_IN_CRC_OUT_NODIF; break; case SCSI_PROT_READ_PASS: case SCSI_PROT_WRITE_PASS: - ret_prof = LPFC_PROF_C1; + *txop = BG_OP_IN_CRC_OUT_CRC; + *rxop = BG_OP_IN_CRC_OUT_CRC; break; case SCSI_PROT_READ_INSERT: @@ -1194,6 +1206,7 @@ lpfc_sc_to_sli_prof(struct lpfc_hba *phba, struct scsi_cmnd *sc) lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9075 BLKGRD: Bad op/guard:%d/%d combination\n", scsi_get_prot_op(sc), guard_type); + ret = 1; break; } } else { @@ -1201,7 +1214,7 @@ lpfc_sc_to_sli_prof(struct lpfc_hba *phba, struct scsi_cmnd *sc) BUG(); } - return ret_prof; + return ret; } struct scsi_dif_tuple { @@ -1266,7 +1279,9 @@ lpfc_get_cmd_dif_parms(struct scsi_cmnd *sc, uint16_t *apptagmask, * The buffer list consists of just one protection group described * below: * +-------------------------+ - * start of prot group --> | PDE_1 | + * start of prot group --> | PDE_5 | + * +-------------------------+ + * | PDE_6 | * +-------------------------+ * | Data BDE | * +-------------------------+ @@ -1284,30 +1299,49 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc, struct ulp_bde64 *bpl, int datasegcnt) { struct scatterlist *sgde = NULL; /* s/g data entry */ - struct lpfc_pde *pde1 = NULL; + struct lpfc_pde5 *pde5 = NULL; + struct lpfc_pde6 *pde6 = NULL; dma_addr_t physaddr; - int i = 0, num_bde = 0; + int i = 0, num_bde = 0, status; int datadir = sc->sc_data_direction; - int prof = LPFC_PROF_INVALID; unsigned blksize; uint32_t reftag; uint16_t apptagmask, apptagval; + uint8_t txop, rxop; - pde1 = (struct lpfc_pde *) bpl; - prof = lpfc_sc_to_sli_prof(phba, sc); - - if (prof == LPFC_PROF_INVALID) + status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop); + if (status) goto out; - /* extract some info from the scsi command for PDE1*/ + /* extract some info from the scsi command for pde*/ blksize = lpfc_cmd_blksize(sc); lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag); - /* setup PDE1 with what we have */ - lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize, - BG_EC_STOP_ERR); - lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag); + /* setup PDE5 with what we have */ + pde5 = (struct lpfc_pde5 *) bpl; + memset(pde5, 0, sizeof(struct lpfc_pde5)); + bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR); + pde5->reftag = reftag; + /* advance bpl and increment bde count */ + num_bde++; + bpl++; + pde6 = (struct lpfc_pde6 *) bpl; + + /* setup PDE6 with the rest of the info */ + memset(pde6, 0, sizeof(struct lpfc_pde6)); + bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR); + bf_set(pde6_optx, pde6, txop); + bf_set(pde6_oprx, pde6, rxop); + if (datadir == DMA_FROM_DEVICE) { + bf_set(pde6_ce, pde6, 1); + bf_set(pde6_re, pde6, 1); + bf_set(pde6_ae, pde6, 1); + } + bf_set(pde6_ai, pde6, 1); + bf_set(pde6_apptagval, pde6, apptagval); + + /* advance bpl and increment bde count */ num_bde++; bpl++; @@ -1342,15 +1376,17 @@ out: * The buffer list for this type consists of one or more of the * protection groups described below: * +-------------------------+ - * start of first prot group --> | PDE_1 | + * start of first prot group --> | PDE_5 | + * +-------------------------+ + * | PDE_6 | * +-------------------------+ - * | PDE_3 (Prot BDE) | + * | PDE_7 (Prot BDE) | * +-------------------------+ * | Data BDE | * +-------------------------+ * |more Data BDE's ... (opt)| * +-------------------------+ - * start of new prot group --> | PDE_1 | + * start of new prot group --> | PDE_5 | * +-------------------------+ * | ... | * +-------------------------+ @@ -1369,19 +1405,21 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, { struct scatterlist *sgde = NULL; /* s/g data entry */ struct scatterlist *sgpe = NULL; /* s/g prot entry */ - struct lpfc_pde *pde1 = NULL; + struct lpfc_pde5 *pde5 = NULL; + struct lpfc_pde6 *pde6 = NULL; struct ulp_bde64 *prot_bde = NULL; dma_addr_t dataphysaddr, protphysaddr; unsigned short curr_data = 0, curr_prot = 0; unsigned int split_offset, protgroup_len; unsigned int protgrp_blks, protgrp_bytes; unsigned int remainder, subtotal; - int prof = LPFC_PROF_INVALID; + int status; int datadir = sc->sc_data_direction; unsigned char pgdone = 0, alldone = 0; unsigned blksize; uint32_t reftag; uint16_t apptagmask, apptagval; + uint8_t txop, rxop; int num_bde = 0; sgpe = scsi_prot_sglist(sc); @@ -1394,31 +1432,47 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, return 0; } - prof = lpfc_sc_to_sli_prof(phba, sc); - if (prof == LPFC_PROF_INVALID) + status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop); + if (status) goto out; - /* extract some info from the scsi command for PDE1*/ + /* extract some info from the scsi command */ blksize = lpfc_cmd_blksize(sc); lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag); split_offset = 0; do { - /* setup the first PDE_1 */ - pde1 = (struct lpfc_pde *) bpl; - - lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize, - BG_EC_STOP_ERR); - lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag); + /* setup PDE5 with what we have */ + pde5 = (struct lpfc_pde5 *) bpl; + memset(pde5, 0, sizeof(struct lpfc_pde5)); + bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR); + pde5->reftag = reftag; + /* advance bpl and increment bde count */ + num_bde++; + bpl++; + pde6 = (struct lpfc_pde6 *) bpl; + + /* setup PDE6 with the rest of the info */ + memset(pde6, 0, sizeof(struct lpfc_pde6)); + bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR); + bf_set(pde6_optx, pde6, txop); + bf_set(pde6_oprx, pde6, rxop); + bf_set(pde6_ce, pde6, 1); + bf_set(pde6_re, pde6, 1); + bf_set(pde6_ae, pde6, 1); + bf_set(pde6_ai, pde6, 1); + bf_set(pde6_apptagval, pde6, apptagval); + + /* advance bpl and increment bde count */ num_bde++; bpl++; /* setup the first BDE that points to protection buffer */ prot_bde = (struct ulp_bde64 *) bpl; protphysaddr = sg_dma_address(sgpe); - prot_bde->addrLow = le32_to_cpu(putPaddrLow(protphysaddr)); - prot_bde->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr)); + prot_bde->addrHigh = le32_to_cpu(putPaddrLow(protphysaddr)); + prot_bde->addrLow = le32_to_cpu(putPaddrHigh(protphysaddr)); protgroup_len = sg_dma_len(sgpe); @@ -1429,10 +1483,7 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, protgrp_bytes = protgrp_blks * blksize; prot_bde->tus.f.bdeSize = protgroup_len; - if (datadir == DMA_TO_DEVICE) - prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64; - else - prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; + prot_bde->tus.f.bdeFlags = LPFC_PDE7_DESCRIPTOR; prot_bde->tus.w = le32_to_cpu(bpl->tus.w); curr_prot++; @@ -1484,6 +1535,7 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, /* Move to the next s/g segment if possible */ sgde = sg_next(sgde); + } /* are we done ? */ @@ -1506,7 +1558,6 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, out: - return num_bde; } /* @@ -1828,8 +1879,8 @@ out: * field of @lpfc_cmd for device with SLI-4 interface spec. * * Return codes: - * 1 - Error - * 0 - Success + * 1 - Error + * 0 - Success **/ static int lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) @@ -1937,8 +1988,8 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) * lpfc_hba struct. * * Return codes: - * 1 - Error - * 0 - Success + * 1 - Error + * 0 - Success **/ static inline int lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) -- cgit v1.2.2 From 49198b371e2da20548d1408a7d3a8dea2f91263c Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 6 Apr 2010 15:04:33 -0400 Subject: [SCSI] lpfc 8.3.12: Critical fixes - Move the code to increase the sg seg count for LP21000 adapters. - Check pcmd on command completion before dereferencing it. - Clear queue memory when creating firmware queues to prevent stale entries. - Replace the use of PAGE_SIZE in many areas that assumed it was always 4k. - Add an else clause to a conditional that needed to unlock the hba_lock. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_bsg.c | 9 ++++----- drivers/scsi/lpfc/lpfc_bsg.h | 1 + drivers/scsi/lpfc/lpfc_els.c | 2 +- drivers/scsi/lpfc/lpfc_init.c | 16 +++++++-------- drivers/scsi/lpfc/lpfc_mbox.c | 16 +++++++-------- drivers/scsi/lpfc/lpfc_sli.c | 47 ++++++++++++++++++++++++++++++++----------- 6 files changed, 56 insertions(+), 35 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 92ad202a9380..141a1ce9b742 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -2591,7 +2591,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, goto job_done; } - mb = kzalloc(PAGE_SIZE, GFP_KERNEL); + mb = kzalloc(BSG_MBOX_SIZE, GFP_KERNEL); if (!mb) { rc = -ENOMEM; goto job_done; @@ -2665,13 +2665,12 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); INIT_LIST_HEAD(&rxbmp->list); rxbpl = (struct ulp_bde64 *) rxbmp->virt; - dmp = diag_cmd_data_alloc(phba, rxbpl, PAGE_SIZE, 0); + dmp = diag_cmd_data_alloc(phba, rxbpl, BSG_MBOX_SIZE, 0); if (!dmp) { rc = -ENOMEM; goto job_done; } - dmp->size = PAGE_SIZE; INIT_LIST_HEAD(&dmp->dma.list); pmb->un.varBIUdiag.un.s2.xmit_bde64.addrHigh = putPaddrHigh(dmp->dma.phys); @@ -2774,12 +2773,12 @@ lpfc_bsg_mbox_cmd(struct fc_bsg_job *job) goto job_error; } - if (job->request_payload.payload_len != PAGE_SIZE) { + if (job->request_payload.payload_len != BSG_MBOX_SIZE) { rc = -EINVAL; goto job_error; } - if (job->reply_payload.payload_len != PAGE_SIZE) { + if (job->reply_payload.payload_len != BSG_MBOX_SIZE) { rc = -EINVAL; goto job_error; } diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h index e89ed22bbb01..2d98689dd693 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.h +++ b/drivers/scsi/lpfc/lpfc_bsg.h @@ -91,6 +91,7 @@ struct get_mgmt_rev_reply { struct MgmtRevInfo info; }; +#define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */ struct dfc_mbox_req { uint32_t command; uint32_t mbOffset; diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 9508661fe825..1de60ce6f296 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -5370,7 +5370,7 @@ lpfc_send_els_failure_event(struct lpfc_hba *phba, sizeof(struct lpfc_name)); pcmd = (uint32_t *) (((struct lpfc_dmabuf *) cmdiocbp->context2)->virt); - lsrjt_event.command = *pcmd; + lsrjt_event.command = (pcmd != NULL) ? *pcmd : 0; stat.un.lsRjtError = be32_to_cpu(rspiocbp->iocb.un.ulpWord[4]); lsrjt_event.reason_code = stat.un.b.lsRjtRsnCode; lsrjt_event.explanation = stat.un.b.lsRjtRsnCodeExp; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 8341d44fe87b..03681013d804 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -2600,15 +2600,6 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) init_timer(&vport->els_tmofunc); vport->els_tmofunc.function = lpfc_els_timeout; vport->els_tmofunc.data = (unsigned long)vport; - if (phba->pcidev->device == PCI_DEVICE_ID_HORNET) { - phba->menlo_flag |= HBA_MENLO_SUPPORT; - /* check for menlo minimum sg count */ - if (phba->cfg_sg_seg_cnt < LPFC_DEFAULT_MENLO_SG_SEG_CNT) { - phba->cfg_sg_seg_cnt = LPFC_DEFAULT_MENLO_SG_SEG_CNT; - shost->sg_tablesize = phba->cfg_sg_seg_cnt; - } - } - error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev); if (error) goto out_put_shost; @@ -3852,6 +3843,13 @@ lpfc_sli_driver_resource_setup(struct lpfc_hba *phba) /* Get all the module params for configuring this host */ lpfc_get_cfgparam(phba); + if (phba->pcidev->device == PCI_DEVICE_ID_HORNET) { + phba->menlo_flag |= HBA_MENLO_SUPPORT; + /* check for menlo minimum sg count */ + if (phba->cfg_sg_seg_cnt < LPFC_DEFAULT_MENLO_SG_SEG_CNT) + phba->cfg_sg_seg_cnt = LPFC_DEFAULT_MENLO_SG_SEG_CNT; + } + /* * Since the sg_tablesize is module parameter, the sg_dma_buf_size * used to create the sg_dma_buf_pool must be dynamically calculated. diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index f9b056ec6186..e84dc33ca201 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -1611,7 +1611,7 @@ lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox) for (sgentry = 0; sgentry < sgecount; sgentry++) { lpfc_sli4_mbx_sge_get(mbox, sgentry, &sge); phyaddr = getPaddr(sge.pa_hi, sge.pa_lo); - dma_free_coherent(&phba->pcidev->dev, PAGE_SIZE, + dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE, mbox->sge_array->addr[sgentry], phyaddr); } /* Free the sge address array memory */ @@ -1669,7 +1669,7 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox, } /* Setup for the none-embedded mbox command */ - pcount = (PAGE_ALIGN(length))/PAGE_SIZE; + pcount = (PAGE_ALIGN(length))/SLI4_PAGE_SIZE; pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ? LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount; /* Allocate record for keeping SGE virtual addresses */ @@ -1684,24 +1684,24 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox, for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) { /* The DMA memory is always allocated in the length of a * page even though the last SGE might not fill up to a - * page, this is used as a priori size of PAGE_SIZE for + * page, this is used as a priori size of SLI4_PAGE_SIZE for * the later DMA memory free. */ - viraddr = dma_alloc_coherent(&phba->pcidev->dev, PAGE_SIZE, + viraddr = dma_alloc_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE, &phyaddr, GFP_KERNEL); /* In case of malloc fails, proceed with whatever we have */ if (!viraddr) break; - memset(viraddr, 0, PAGE_SIZE); + memset(viraddr, 0, SLI4_PAGE_SIZE); mbox->sge_array->addr[pagen] = viraddr; /* Keep the first page for later sub-header construction */ if (pagen == 0) cfg_shdr = (union lpfc_sli4_cfg_shdr *)viraddr; resid_len = length - alloc_len; - if (resid_len > PAGE_SIZE) { + if (resid_len > SLI4_PAGE_SIZE) { lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr, - PAGE_SIZE); - alloc_len += PAGE_SIZE; + SLI4_PAGE_SIZE); + alloc_len += SLI4_PAGE_SIZE; } else { lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr, resid_len); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 2c88999b7095..73259bca1d14 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -4296,7 +4296,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) "2570 Failed to read FCoE parameters\n"); /* Issue READ_REV to collect vpd and FW information. */ - vpd_size = PAGE_SIZE; + vpd_size = SLI4_PAGE_SIZE; vpd = kzalloc(vpd_size, GFP_KERNEL); if (!vpd) { rc = -ENOMEM; @@ -7136,13 +7136,11 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, */ list_del_init(&abort_iocb->list); pring->txcmplq_cnt--; - spin_unlock_irq(&phba->hbalock); /* Firmware could still be in progress of DMAing * payload, so don't free data buffer till after * a hbeat. */ - spin_lock_irq(&phba->hbalock); abort_iocb->iocb_flag |= LPFC_DELAY_MEM_FREE; abort_iocb->iocb_flag &= ~LPFC_DRIVER_ABORTED; spin_unlock_irq(&phba->hbalock); @@ -7150,7 +7148,8 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, abort_iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT; abort_iocb->iocb.un.ulpWord[4] = IOERR_ABORT_REQUESTED; (abort_iocb->iocb_cmpl)(phba, abort_iocb, abort_iocb); - } + } else + spin_unlock_irq(&phba->hbalock); } lpfc_sli_release_iocbq(phba, cmdiocb); @@ -9544,7 +9543,7 @@ lpfc_sli4_queue_free(struct lpfc_queue *queue) while (!list_empty(&queue->page_list)) { list_remove_head(&queue->page_list, dmabuf, struct lpfc_dmabuf, list); - dma_free_coherent(&queue->phba->pcidev->dev, PAGE_SIZE, + dma_free_coherent(&queue->phba->pcidev->dev, SLI4_PAGE_SIZE, dmabuf->virt, dmabuf->phys); kfree(dmabuf); } @@ -9572,7 +9571,6 @@ lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t entry_size, void *dma_pointer; uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz; - if (!phba->sli4_hba.pc_sli4_params.supported) hw_page_size = SLI4_PAGE_SIZE; @@ -9647,6 +9645,10 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax) uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; uint16_t dmult; + uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz; + + if (!phba->sli4_hba.pc_sli4_params.supported) + hw_page_size = SLI4_PAGE_SIZE; mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mbox) @@ -9696,6 +9698,7 @@ lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax) break; } list_for_each_entry(dmabuf, &eq->page_list, list) { + memset(dmabuf->virt, 0, hw_page_size); eq_create->u.request.page[dmabuf->buffer_tag].addr_lo = putPaddrLow(dmabuf->phys); eq_create->u.request.page[dmabuf->buffer_tag].addr_hi = @@ -9758,6 +9761,11 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq, int rc, length, status = 0; uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; + uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz; + + if (!phba->sli4_hba.pc_sli4_params.supported) + hw_page_size = SLI4_PAGE_SIZE; + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mbox) @@ -9795,6 +9803,7 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq, break; } list_for_each_entry(dmabuf, &cq->page_list, list) { + memset(dmabuf->virt, 0, hw_page_size); cq_create->u.request.page[dmabuf->buffer_tag].addr_lo = putPaddrLow(dmabuf->phys); cq_create->u.request.page[dmabuf->buffer_tag].addr_hi = @@ -9924,7 +9933,10 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq, int rc, length, status = 0; uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; + uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz; + if (!phba->sli4_hba.pc_sli4_params.supported) + hw_page_size = SLI4_PAGE_SIZE; mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mbox) @@ -9973,6 +9985,7 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq, break; } list_for_each_entry(dmabuf, &mq->page_list, list) { + memset(dmabuf->virt, 0, hw_page_size); mq_create_ext->u.request.page[dmabuf->buffer_tag].addr_lo = putPaddrLow(dmabuf->phys); mq_create_ext->u.request.page[dmabuf->buffer_tag].addr_hi = @@ -10054,6 +10067,10 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq, int rc, length, status = 0; uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; + uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz; + + if (!phba->sli4_hba.pc_sli4_params.supported) + hw_page_size = SLI4_PAGE_SIZE; mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mbox) @@ -10069,6 +10086,7 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq, bf_set(lpfc_mbx_wq_create_cq_id, &wq_create->u.request, cq->queue_id); list_for_each_entry(dmabuf, &wq->page_list, list) { + memset(dmabuf->virt, 0, hw_page_size); wq_create->u.request.page[dmabuf->buffer_tag].addr_lo = putPaddrLow(dmabuf->phys); wq_create->u.request.page[dmabuf->buffer_tag].addr_hi = @@ -10137,6 +10155,10 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq, int rc, length, status = 0; uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; + uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz; + + if (!phba->sli4_hba.pc_sli4_params.supported) + hw_page_size = SLI4_PAGE_SIZE; if (hrq->entry_count != drq->entry_count) return -EINVAL; @@ -10181,6 +10203,7 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq, bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context, LPFC_HDR_BUF_SIZE); list_for_each_entry(dmabuf, &hrq->page_list, list) { + memset(dmabuf->virt, 0, hw_page_size); rq_create->u.request.page[dmabuf->buffer_tag].addr_lo = putPaddrLow(dmabuf->phys); rq_create->u.request.page[dmabuf->buffer_tag].addr_hi = @@ -10753,7 +10776,7 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) + sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t); - if (reqlen > PAGE_SIZE) { + if (reqlen > SLI4_PAGE_SIZE) { lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "2559 Block sgl registration required DMA " "size (%d) great than a page\n", reqlen); @@ -10859,7 +10882,7 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist, /* Calculate the requested length of the dma memory */ reqlen = cnt * sizeof(struct sgl_page_pairs) + sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t); - if (reqlen > PAGE_SIZE) { + if (reqlen > SLI4_PAGE_SIZE) { lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0217 Block sgl registration required DMA " "size (%d) great than a page\n", reqlen); @@ -11695,8 +11718,8 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba, * * This routine is invoked to post rpi header templates to the * HBA consistent with the SLI-4 interface spec. This routine - * posts a PAGE_SIZE memory region to the port to hold up to - * PAGE_SIZE modulo 64 rpi context headers. + * posts a SLI4_PAGE_SIZE memory region to the port to hold up to + * SLI4_PAGE_SIZE modulo 64 rpi context headers. * * This routine does not require any locks. It's usage is expected * to be driver load or reset recovery when the driver is @@ -11799,8 +11822,8 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) * * This routine is invoked to post rpi header templates to the * HBA consistent with the SLI-4 interface spec. This routine - * posts a PAGE_SIZE memory region to the port to hold up to - * PAGE_SIZE modulo 64 rpi context headers. + * posts a SLI4_PAGE_SIZE memory region to the port to hold up to + * SLI4_PAGE_SIZE modulo 64 rpi context headers. * * Returns * A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful -- cgit v1.2.2 From c74959370369cd870560777b7db7ec940565bb85 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 6 Apr 2010 15:05:28 -0400 Subject: [SCSI] lpfc 8.3.12: BSG Fixes and enhancements - Add memcpy to mailbox completion to transfer reply correctly. - Add support for BSG mailbox commands (dump, update_cfg, and event_log_status). - Add warning message and refuse mailbox command while mgmt is blocked. - Add checks for memory allocation failure. - Add check for sli4 dump zero BDE size. - Only copy data if mailbox commands succeed. - Add support for Read Event Log mailbox command. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_bsg.c | 274 +++++++++++++++++++++++++++++++++++++------ drivers/scsi/lpfc/lpfc_bsg.h | 2 +- drivers/scsi/lpfc/lpfc_hw.h | 14 +++ drivers/scsi/lpfc/lpfc_sli.c | 2 + 4 files changed, 253 insertions(+), 39 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 141a1ce9b742..dcf088262b20 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -84,7 +84,7 @@ struct lpfc_bsg_mbox { uint8_t *ext; /* extended mailbox data */ uint32_t mbOffset; /* from app */ uint32_t inExtWLen; /* from app */ - uint32_t outWxtWLen; /* from app */ + uint32_t outExtWLen; /* from app */ /* job waiting for this mbox command to finish */ struct fc_bsg_job *set_job; @@ -1714,21 +1714,26 @@ static int lpfcdiag_loop_get_xri(struct lpfc_hba *phba, uint16_t rpi, dmabuf = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); if (dmabuf) { dmabuf->virt = lpfc_mbuf_alloc(phba, 0, &dmabuf->phys); - INIT_LIST_HEAD(&dmabuf->list); - bpl = (struct ulp_bde64 *) dmabuf->virt; - memset(bpl, 0, sizeof(*bpl)); - ctreq = (struct lpfc_sli_ct_request *)(bpl + 1); - bpl->addrHigh = - le32_to_cpu(putPaddrHigh(dmabuf->phys + sizeof(*bpl))); - bpl->addrLow = - le32_to_cpu(putPaddrLow(dmabuf->phys + sizeof(*bpl))); - bpl->tus.f.bdeFlags = 0; - bpl->tus.f.bdeSize = ELX_LOOPBACK_HEADER_SZ; - bpl->tus.w = le32_to_cpu(bpl->tus.w); + if (dmabuf->virt) { + INIT_LIST_HEAD(&dmabuf->list); + bpl = (struct ulp_bde64 *) dmabuf->virt; + memset(bpl, 0, sizeof(*bpl)); + ctreq = (struct lpfc_sli_ct_request *)(bpl + 1); + bpl->addrHigh = + le32_to_cpu(putPaddrHigh(dmabuf->phys + + sizeof(*bpl))); + bpl->addrLow = + le32_to_cpu(putPaddrLow(dmabuf->phys + + sizeof(*bpl))); + bpl->tus.f.bdeFlags = 0; + bpl->tus.f.bdeSize = ELX_LOOPBACK_HEADER_SZ; + bpl->tus.w = le32_to_cpu(bpl->tus.w); + } } if (cmdiocbq == NULL || rspiocbq == NULL || - dmabuf == NULL || bpl == NULL || ctreq == NULL) { + dmabuf == NULL || bpl == NULL || ctreq == NULL || + dmabuf->virt == NULL) { ret_val = ENOMEM; goto err_get_xri_exit; } @@ -1924,9 +1929,11 @@ static int lpfcdiag_loop_post_rxbufs(struct lpfc_hba *phba, uint16_t rxxri, rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); if (rxbmp != NULL) { rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); - INIT_LIST_HEAD(&rxbmp->list); - rxbpl = (struct ulp_bde64 *) rxbmp->virt; - rxbuffer = diag_cmd_data_alloc(phba, rxbpl, len, 0); + if (rxbmp->virt) { + INIT_LIST_HEAD(&rxbmp->list); + rxbpl = (struct ulp_bde64 *) rxbmp->virt; + rxbuffer = diag_cmd_data_alloc(phba, rxbpl, len, 0); + } } if (!cmdiocbq || !rxbmp || !rxbpl || !rxbuffer) { @@ -2180,14 +2187,16 @@ lpfc_bsg_diag_test(struct fc_bsg_job *job) if (txbmp) { txbmp->virt = lpfc_mbuf_alloc(phba, 0, &txbmp->phys); - INIT_LIST_HEAD(&txbmp->list); - txbpl = (struct ulp_bde64 *) txbmp->virt; - if (txbpl) + if (txbmp->virt) { + INIT_LIST_HEAD(&txbmp->list); + txbpl = (struct ulp_bde64 *) txbmp->virt; txbuffer = diag_cmd_data_alloc(phba, txbpl, full_size, 0); + } } - if (!cmdiocbq || !rspiocbq || !txbmp || !txbpl || !txbuffer) { + if (!cmdiocbq || !rspiocbq || !txbmp || !txbpl || !txbuffer || + !txbmp->virt) { rc = -ENOMEM; goto err_loopback_test_exit; } @@ -2404,12 +2413,34 @@ lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) from = (uint8_t *)&pmboxq->u.mb; to = (uint8_t *)dd_data->context_un.mbox.mb; memcpy(to, from, sizeof(MAILBOX_t)); - /* copy the extended data if any, count is in words */ - if (dd_data->context_un.mbox.outWxtWLen) { - from = (uint8_t *)dd_data->context_un.mbox.ext; - to += sizeof(MAILBOX_t); - memcpy(to, from, - dd_data->context_un.mbox.outWxtWLen * sizeof(uint32_t)); + if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS) { + /* copy the extended data if any, count is in words */ + if (dd_data->context_un.mbox.outExtWLen) { + from = (uint8_t *)dd_data->context_un.mbox.ext; + to += sizeof(MAILBOX_t); + size = dd_data->context_un.mbox.outExtWLen * + sizeof(uint32_t); + memcpy(to, from, size); + } else if (pmboxq->u.mb.mbxCommand == MBX_RUN_BIU_DIAG64) { + from = (uint8_t *)dd_data->context_un.mbox. + dmp->dma.virt; + to += sizeof(MAILBOX_t); + size = dd_data->context_un.mbox.dmp->size; + memcpy(to, from, size); + } else if ((phba->sli_rev == LPFC_SLI_REV4) && + (pmboxq->u.mb.mbxCommand == MBX_DUMP_MEMORY)) { + from = (uint8_t *)dd_data->context_un.mbox.dmp->dma. + virt; + to += sizeof(MAILBOX_t); + size = pmboxq->u.mb.un.varWords[5]; + memcpy(to, from, size); + } else if (pmboxq->u.mb.mbxCommand == MBX_READ_EVENT_LOG) { + from = (uint8_t *)dd_data->context_un. + mbox.dmp->dma.virt; + to += sizeof(MAILBOX_t); + size = dd_data->context_un.mbox.dmp->size; + memcpy(to, from, size); + } } from = (uint8_t *)dd_data->context_un.mbox.mb; @@ -2503,6 +2534,7 @@ static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba, case MBX_SET_DEBUG: case MBX_WRITE_WWN: case MBX_SLI4_CONFIG: + case MBX_READ_EVENT_LOG: case MBX_READ_EVENT_LOG_STATUS: case MBX_WRITE_EVENT_LOG: case MBX_PORT_CAPABILITIES: @@ -2522,7 +2554,6 @@ static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba, phba->fc_topology = TOPOLOGY_PT_PT; } break; - case MBX_READ_EVENT_LOG: case MBX_READ_SPARM64: case MBX_READ_LA: case MBX_READ_LA64: @@ -2577,7 +2608,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, /* check if requested extended data lengths are valid */ if ((mbox_req->inExtWLen > MAILBOX_EXT_SIZE) || - (mbox_req->outWxtWLen > MAILBOX_EXT_SIZE)) { + (mbox_req->outExtWLen > MAILBOX_EXT_SIZE)) { rc = -ERANGE; goto job_done; } @@ -2618,8 +2649,29 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, pmb->mbxOwner = OWN_HOST; pmboxq->vport = vport; + /* If HBA encountered an error attention, allow only DUMP + * or RESTART mailbox commands until the HBA is restarted. + */ + if (phba->pport->stopped && + pmb->mbxCommand != MBX_DUMP_MEMORY && + pmb->mbxCommand != MBX_RESTART && + pmb->mbxCommand != MBX_WRITE_VPARMS && + pmb->mbxCommand != MBX_WRITE_WWN) + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, + "2797 mbox: Issued mailbox cmd " + "0x%x while in stopped state.\n", + pmb->mbxCommand); + + /* Don't allow mailbox commands to be sent when blocked + * or when in the middle of discovery + */ + if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) { + rc = -EAGAIN; + goto job_done; + } + /* extended mailbox commands will need an extended buffer */ - if (mbox_req->inExtWLen || mbox_req->outWxtWLen) { + if (mbox_req->inExtWLen || mbox_req->outExtWLen) { ext = kzalloc(MAILBOX_EXT_SIZE, GFP_KERNEL); if (!ext) { rc = -ENOMEM; @@ -2639,7 +2691,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, mbox_req->inExtWLen * sizeof(uint32_t); pmboxq->out_ext_byte_len = - mbox_req->outWxtWLen * + mbox_req->outExtWLen * sizeof(uint32_t); pmboxq->mbox_offset_word = mbox_req->mbOffset; @@ -2647,7 +2699,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, pmboxq->in_ext_byte_len = mbox_req->inExtWLen * sizeof(uint32_t); pmboxq->out_ext_byte_len = - mbox_req->outWxtWLen * sizeof(uint32_t); + mbox_req->outExtWLen * sizeof(uint32_t); pmboxq->mbox_offset_word = mbox_req->mbOffset; } @@ -2656,6 +2708,17 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, * use ours */ if (pmb->mbxCommand == MBX_RUN_BIU_DIAG64) { + uint32_t transmit_length = pmb->un.varWords[1]; + uint32_t receive_length = pmb->un.varWords[4]; + /* transmit length cannot be greater than receive length or + * mailbox extension size + */ + if ((transmit_length > receive_length) || + (transmit_length > MAILBOX_EXT_SIZE)) { + rc = -ERANGE; + goto job_done; + } + rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); if (!rxbmp) { rc = -ENOMEM; @@ -2663,9 +2726,14 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, } rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); + if (!rxbmp->virt) { + rc = -ENOMEM; + goto job_done; + } + INIT_LIST_HEAD(&rxbmp->list); rxbpl = (struct ulp_bde64 *) rxbmp->virt; - dmp = diag_cmd_data_alloc(phba, rxbpl, BSG_MBOX_SIZE, 0); + dmp = diag_cmd_data_alloc(phba, rxbpl, transmit_length, 0); if (!dmp) { rc = -ENOMEM; goto job_done; @@ -2685,13 +2753,143 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, putPaddrLow(dmp->dma.phys + pmb->un.varBIUdiag.un.s2. xmit_bde64.tus.f.bdeSize); - dd_data->context_un.mbox.rxbmp = rxbmp; - dd_data->context_un.mbox.dmp = dmp; - } else { - dd_data->context_un.mbox.rxbmp = NULL; - dd_data->context_un.mbox.dmp = NULL; + + /* copy the transmit data found in the mailbox extension area */ + from = (uint8_t *)mb; + from += sizeof(MAILBOX_t); + memcpy((uint8_t *)dmp->dma.virt, from, transmit_length); + } else if (pmb->mbxCommand == MBX_READ_EVENT_LOG) { + struct READ_EVENT_LOG_VAR *rdEventLog = + &pmb->un.varRdEventLog ; + uint32_t receive_length = rdEventLog->rcv_bde64.tus.f.bdeSize; + uint32_t mode = bf_get(lpfc_event_log, rdEventLog); + + /* receive length cannot be greater than mailbox + * extension size + */ + if (receive_length > MAILBOX_EXT_SIZE) { + rc = -ERANGE; + goto job_done; + } + + /* mode zero uses a bde like biu diags command */ + if (mode == 0) { + + /* rebuild the command for sli4 using our own buffers + * like we do for biu diags + */ + + rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); + if (!rxbmp) { + rc = -ENOMEM; + goto job_done; + } + + rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); + rxbpl = (struct ulp_bde64 *) rxbmp->virt; + if (rxbpl) { + INIT_LIST_HEAD(&rxbmp->list); + dmp = diag_cmd_data_alloc(phba, rxbpl, + receive_length, 0); + } + + if (!dmp) { + rc = -ENOMEM; + goto job_done; + } + + INIT_LIST_HEAD(&dmp->dma.list); + pmb->un.varWords[3] = putPaddrLow(dmp->dma.phys); + pmb->un.varWords[4] = putPaddrHigh(dmp->dma.phys); + } + } else if (phba->sli_rev == LPFC_SLI_REV4) { + if (pmb->mbxCommand == MBX_DUMP_MEMORY) { + /* rebuild the command for sli4 using our own buffers + * like we do for biu diags + */ + uint32_t receive_length = pmb->un.varWords[2]; + /* receive length cannot be greater than mailbox + * extension size + */ + if ((receive_length == 0) || + (receive_length > MAILBOX_EXT_SIZE)) { + rc = -ERANGE; + goto job_done; + } + + rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); + if (!rxbmp) { + rc = -ENOMEM; + goto job_done; + } + + rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); + if (!rxbmp->virt) { + rc = -ENOMEM; + goto job_done; + } + + INIT_LIST_HEAD(&rxbmp->list); + rxbpl = (struct ulp_bde64 *) rxbmp->virt; + dmp = diag_cmd_data_alloc(phba, rxbpl, receive_length, + 0); + if (!dmp) { + rc = -ENOMEM; + goto job_done; + } + + INIT_LIST_HEAD(&dmp->dma.list); + pmb->un.varWords[3] = putPaddrLow(dmp->dma.phys); + pmb->un.varWords[4] = putPaddrHigh(dmp->dma.phys); + } else if ((pmb->mbxCommand == MBX_UPDATE_CFG) && + pmb->un.varUpdateCfg.co) { + struct ulp_bde64 *bde = + (struct ulp_bde64 *)&pmb->un.varWords[4]; + + /* bde size cannot be greater than mailbox ext size */ + if (bde->tus.f.bdeSize > MAILBOX_EXT_SIZE) { + rc = -ERANGE; + goto job_done; + } + + rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); + if (!rxbmp) { + rc = -ENOMEM; + goto job_done; + } + + rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); + if (!rxbmp->virt) { + rc = -ENOMEM; + goto job_done; + } + + INIT_LIST_HEAD(&rxbmp->list); + rxbpl = (struct ulp_bde64 *) rxbmp->virt; + dmp = diag_cmd_data_alloc(phba, rxbpl, + bde->tus.f.bdeSize, 0); + if (!dmp) { + rc = -ENOMEM; + goto job_done; + } + + INIT_LIST_HEAD(&dmp->dma.list); + bde->addrHigh = putPaddrHigh(dmp->dma.phys); + bde->addrLow = putPaddrLow(dmp->dma.phys); + + /* copy the transmit data found in the mailbox + * extension area + */ + from = (uint8_t *)mb; + from += sizeof(MAILBOX_t); + memcpy((uint8_t *)dmp->dma.virt, from, + bde->tus.f.bdeSize); + } } + dd_data->context_un.mbox.rxbmp = rxbmp; + dd_data->context_un.mbox.dmp = dmp; + /* setup wake call as IOCB callback */ pmboxq->mbox_cmpl = lpfc_bsg_wake_mbox_wait; @@ -2704,7 +2902,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, dd_data->context_un.mbox.ext = ext; dd_data->context_un.mbox.mbOffset = mbox_req->mbOffset; dd_data->context_un.mbox.inExtWLen = mbox_req->inExtWLen; - dd_data->context_un.mbox.outWxtWLen = mbox_req->outWxtWLen; + dd_data->context_un.mbox.outExtWLen = mbox_req->outExtWLen; job->dd_data = dd_data; if ((vport->fc_flag & FC_OFFLINE_MODE) || diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h index 2d98689dd693..a2c33e7c9152 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.h +++ b/drivers/scsi/lpfc/lpfc_bsg.h @@ -96,7 +96,7 @@ struct dfc_mbox_req { uint32_t command; uint32_t mbOffset; uint32_t inExtWLen; - uint32_t outWxtWLen; + uint32_t outExtWLen; }; /* Used for menlo command or menlo data. The xri is only used for menlo data */ diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 0cf9a2bd3469..e654d01dad24 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1732,6 +1732,17 @@ typedef struct { } un; } BIU_DIAG_VAR; +/* Structure for MB command READ_EVENT_LOG (0x38) */ +struct READ_EVENT_LOG_VAR { + uint32_t word1; +#define lpfc_event_log_SHIFT 29 +#define lpfc_event_log_MASK 0x00000001 +#define lpfc_event_log_WORD word1 +#define USE_MAILBOX_RESPONSE 1 + uint32_t offset; + struct ulp_bde64 rcv_bde64; +}; + /* Structure for MB Command INIT_LINK (05) */ typedef struct { @@ -2966,6 +2977,9 @@ typedef union { REG_VPI_VAR varRegVpi; /* cmd = 0x96 (REG_VPI) */ UNREG_VPI_VAR varUnregVpi; /* cmd = 0x97 (UNREG_VPI) */ ASYNCEVT_ENABLE_VAR varCfgAsyncEvent; /*cmd = x33 (CONFIG_ASYNC) */ + struct READ_EVENT_LOG_VAR varRdEventLog; /* cmd = 0x38 + * (READ_EVENT_LOG) + */ struct config_msi_var varCfgMSI;/* cmd = x30 (CONFIG_MSI) */ } MAILVARIANTS; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 73259bca1d14..1ab7937097a4 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1659,6 +1659,8 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_INIT_VPI: case MBX_INIT_VFI: case MBX_RESUME_RPI: + case MBX_READ_EVENT_LOG_STATUS: + case MBX_READ_EVENT_LOG: ret = mbxCommand; break; default: -- cgit v1.2.2 From 78730cfe0649bce86e64eafda9bdffa38f05d396 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 6 Apr 2010 15:06:30 -0400 Subject: [SCSI] lpfc 8.3.12: Fix discovery issues - Add code to prevent unreg_vpi mailbox command from failing. - Add code to reset the HBA if unreg_vpi mailbox fails with busy status. - Remove code that was clearing the nlp_type stored during rport discovery. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_crtn.h | 1 + drivers/scsi/lpfc/lpfc_disc.h | 1 + drivers/scsi/lpfc/lpfc_els.c | 2 ++ drivers/scsi/lpfc/lpfc_hbadisc.c | 15 ++++++++-- drivers/scsi/lpfc/lpfc_init.c | 20 ++++++++++++-- drivers/scsi/lpfc/lpfc_nportdisc.c | 56 ++++++++++++++++++++++++++++++++++++++ drivers/scsi/lpfc/lpfc_sli.c | 15 ++++++++++ 7 files changed, 105 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 5087c4211b43..fbc9baeb6048 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -65,6 +65,7 @@ void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_init_vpi_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_cancel_all_vport_retry_delay_timer(struct lpfc_hba *); void lpfc_retry_pport_discovery(struct lpfc_hba *); +void lpfc_release_rpi(struct lpfc_hba *, struct lpfc_vport *, uint16_t); void lpfc_mbx_cmpl_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *, LPFC_MBOXQ_t *); diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index 2851d75ffc6f..36257a685509 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -38,6 +38,7 @@ enum lpfc_work_type { LPFC_EVT_ELS_RETRY, LPFC_EVT_DEV_LOSS, LPFC_EVT_FASTPATH_MGMT_EVT, + LPFC_EVT_RESET_HBA, }; /* structure used to queue event to the discovery tasklet */ diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 1de60ce6f296..c4c7f0ad7468 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -584,6 +584,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, spin_unlock_irq(shost->host_lock); lpfc_unreg_rpi(vport, np); } + lpfc_cleanup_pending_mbox(vport); if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) { lpfc_mbx_unreg_vpi(vport); spin_lock_irq(shost->host_lock); @@ -6316,6 +6317,7 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, spin_unlock_irq(shost->host_lock); lpfc_unreg_rpi(vport, np); } + lpfc_cleanup_pending_mbox(vport); lpfc_mbx_unreg_vpi(vport); spin_lock_irq(shost->host_lock); vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index d2b55f05aa02..1f87b4fb8b50 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -475,6 +475,10 @@ lpfc_work_list_done(struct lpfc_hba *phba) lpfc_send_fastpath_evt(phba, evtp); free_evt = 0; break; + case LPFC_EVT_RESET_HBA: + if (!(phba->pport->load_flag & FC_UNLOADING)) + lpfc_reset_hba(phba); + break; } if (free_evt) kfree(evtp); @@ -2737,11 +2741,18 @@ lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) switch (mb->mbxStatus) { case 0x0011: case 0x0020: - case 0x9700: lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, "0911 cmpl_unreg_vpi, mb status = 0x%x\n", mb->mbxStatus); break; + /* If VPI is busy, reset the HBA */ + case 0x9700: + lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE, + "2798 Unreg_vpi failed vpi 0x%x, mb status = 0x%x\n", + vport->vpi, mb->mbxStatus); + if (!(phba->pport->load_flag & FC_UNLOADING)) + lpfc_workq_post_event(phba, NULL, NULL, + LPFC_EVT_RESET_HBA); } spin_lock_irq(shost->host_lock); vport->vpi_state &= ~LPFC_VPI_REGISTERED; @@ -3233,7 +3244,6 @@ lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, struct Scsi_Host *shost = lpfc_shost_from_vport(vport); if (new_state == NLP_STE_UNMAPPED_NODE) { - ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR); ndlp->nlp_flag &= ~NLP_NODEV_REMOVE; ndlp->nlp_type |= NLP_FC_NODE; } @@ -4991,6 +5001,7 @@ lpfc_unregister_fcf_prep(struct lpfc_hba *phba) ndlp = lpfc_findnode_did(vports[i], Fabric_DID); if (ndlp) lpfc_cancel_retry_delay_tmo(vports[i], ndlp); + lpfc_cleanup_pending_mbox(vports[i]); lpfc_mbx_unreg_vpi(vports[i]); shost = lpfc_shost_from_vport(vports[i]); spin_lock_irq(shost->host_lock); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 03681013d804..cd9697edf860 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -3227,12 +3227,26 @@ lpfc_sli4_perform_vport_cvl(struct lpfc_vport *vport) if (!vport) return NULL; - ndlp = lpfc_findnode_did(vport, Fabric_DID); - if (!ndlp) - return NULL; phba = vport->phba; if (!phba) return NULL; + ndlp = lpfc_findnode_did(vport, Fabric_DID); + if (!ndlp) { + /* Cannot find existing Fabric ndlp, so allocate a new one */ + ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL); + if (!ndlp) + return 0; + lpfc_nlp_init(vport, ndlp, Fabric_DID); + /* Set the node type */ + ndlp->nlp_type |= NLP_FABRIC; + /* Put ndlp onto node list */ + lpfc_enqueue_node(vport, ndlp); + } else if (!NLP_CHK_NODE_ACT(ndlp)) { + /* re-setup ndlp without removing from node list */ + ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_UNUSED_NODE); + if (!ndlp) + return 0; + } if (phba->pport->port_state <= LPFC_FLOGI) return NULL; /* If virtual link is not yet instantiated ignore CVL */ diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index e1086da69061..b90820a699fd 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -637,11 +637,55 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) lpfc_unreg_rpi(vport, ndlp); return 0; } +/** + * lpfc_release_rpi - Release a RPI by issueing unreg_login mailbox cmd. + * @phba : Pointer to lpfc_hba structure. + * @vport: Pointer to lpfc_vport structure. + * @rpi : rpi to be release. + * + * This function will send a unreg_login mailbox command to the firmware + * to release a rpi. + **/ +void +lpfc_release_rpi(struct lpfc_hba *phba, + struct lpfc_vport *vport, + uint16_t rpi) +{ + LPFC_MBOXQ_t *pmb; + int rc; + + pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, + GFP_KERNEL); + if (!pmb) + lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, + "2796 mailbox memory allocation failed \n"); + else { + lpfc_unreg_login(phba, vport->vpi, rpi, pmb); + pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) + mempool_free(pmb, phba->mbox_mem_pool); + } +} static uint32_t lpfc_disc_illegal(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, void *arg, uint32_t evt) { + struct lpfc_hba *phba; + LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg; + MAILBOX_t *mb; + uint16_t rpi; + + phba = vport->phba; + /* Release the RPI if reglogin completing */ + if (!(phba->pport->load_flag & FC_UNLOADING) && + (evt == NLP_EVT_CMPL_REG_LOGIN) && + (!pmb->u.mb.mbxStatus)) { + mb = &pmb->u.mb; + rpi = pmb->u.mb.un.varWords[0]; + lpfc_release_rpi(phba, vport, rpi); + } lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, "0271 Illegal State Transition: node x%x " "event x%x, state x%x Data: x%x x%x\n", @@ -977,6 +1021,18 @@ static uint32_t lpfc_cmpl_reglogin_plogi_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, void *arg, uint32_t evt) { + struct lpfc_hba *phba; + LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg; + MAILBOX_t *mb = &pmb->u.mb; + uint16_t rpi; + + phba = vport->phba; + /* Release the RPI */ + if (!(phba->pport->load_flag & FC_UNLOADING) && + !mb->mbxStatus) { + rpi = pmb->u.mb.un.varWords[0]; + lpfc_release_rpi(phba, vport, rpi); + } return ndlp->nlp_state; } diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 1ab7937097a4..7a61455140b6 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -12661,6 +12661,7 @@ lpfc_cleanup_pending_mbox(struct lpfc_vport *vport) struct lpfc_hba *phba = vport->phba; LPFC_MBOXQ_t *mb, *nextmb; struct lpfc_dmabuf *mp; + struct lpfc_nodelist *ndlp; spin_lock_irq(&phba->hbalock); list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) { @@ -12677,6 +12678,11 @@ lpfc_cleanup_pending_mbox(struct lpfc_vport *vport) __lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); } + ndlp = (struct lpfc_nodelist *) mb->context2; + if (ndlp) { + lpfc_nlp_put(ndlp); + mb->context2 = NULL; + } } list_del(&mb->list); mempool_free(mb, phba->mbox_mem_pool); @@ -12686,6 +12692,15 @@ lpfc_cleanup_pending_mbox(struct lpfc_vport *vport) if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) || (mb->u.mb.mbxCommand == MBX_REG_VPI)) mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) { + ndlp = (struct lpfc_nodelist *) mb->context2; + if (ndlp) { + lpfc_nlp_put(ndlp); + mb->context2 = NULL; + } + /* Unregister the RPI when mailbox complete */ + mb->mbox_flag |= LPFC_MBX_IMED_UNREG; + } } spin_unlock_irq(&phba->hbalock); } -- cgit v1.2.2 From a1172ca2f20074626d7aa77e747824757673cf22 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 6 Apr 2010 15:07:03 -0400 Subject: [SCSI] lpfc 8.3.12: Update Driver version to 8.3.12 Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index a3a11d37de79..5294c3a515a1 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.11" +#define LPFC_DRIVER_VERSION "8.3.12" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" #define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp" -- cgit v1.2.2 From 130b958a5dbf0fca361beef5713715a2eba6529f Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 8 Apr 2010 17:54:32 +0530 Subject: [SCSI] mpt2sas: Reworked scmd->result priority for _scsih_qcmd. we added support to set the deleted flag prior to device scan, then clear the flag for responding devices, leaving the deleted flag only set for missing devices. The problem is for internal generated host resets, IO queues are not blocked at scsi mid layer level. IO will be continued sent to driver, and driver will return SCSI_MLQUEUE_HOST_BUSY. The problem is the driver checks for the deleted flag before it checks for the controller being in reset, so there is a window where the driver would be returning DID_NO_CONNECT for responding devices. This occurs during the time between calling _scsih_prep_device_scan, and _scsih_mark_responding_sas_device & _scsih_mark_responding_raid_device. Fix the queuecommand entry point so ioc->shost_recovery flag sanity check is given higher presidence then the device "deleted flag" check. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index bb5659ca128d..77163bad75f9 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2957,25 +2957,32 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) scmd->scsi_done = done; sas_device_priv_data = scmd->device->hostdata; - if (!sas_device_priv_data) { + if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; scmd->scsi_done(scmd); return 0; } sas_target_priv_data = sas_device_priv_data->sas_target; - if (!sas_target_priv_data || sas_target_priv_data->handle == - MPT2SAS_INVALID_DEVICE_HANDLE || sas_target_priv_data->deleted) { + /* invalid device handle */ + if (sas_target_priv_data->handle == MPT2SAS_INVALID_DEVICE_HANDLE) { scmd->result = DID_NO_CONNECT << 16; scmd->scsi_done(scmd); return 0; } - /* see if we are busy with task managment stuff */ - if (sas_device_priv_data->block || sas_target_priv_data->tm_busy) - return SCSI_MLQUEUE_DEVICE_BUSY; - else if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress) + /* host recovery or link resets sent via IOCTLs */ + if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress) return SCSI_MLQUEUE_HOST_BUSY; + /* device busy with task managment */ + else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy) + return SCSI_MLQUEUE_DEVICE_BUSY; + /* device has been deleted */ + else if (sas_target_priv_data->deleted) { + scmd->result = DID_NO_CONNECT << 16; + scmd->scsi_done(scmd); + return 0; + } if (scmd->sc_data_direction == DMA_FROM_DEVICE) mpi_control = MPI2_SCSIIO_CONTROL_READ; -- cgit v1.2.2 From 980ead3180233d09ad37aacd803059b3142c7863 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 8 Apr 2010 17:55:22 +0530 Subject: [SCSI] mpt2sas: Before removing sas_device search device in list for _scsih_sas_device_remove Fix a oops in _scsih_sas_device_remove. The driver was attempting to delete a object from the sas_device link list when the object was not present. Added sanity check for sas_device NULL dereference. before deleting sas_device now driver will search device in list then only it will follow device removal. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 77163bad75f9..c5ff26a2a51d 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -537,10 +537,15 @@ _scsih_sas_device_remove(struct MPT2SAS_ADAPTER *ioc, { unsigned long flags; + if (!sas_device) + return; + spin_lock_irqsave(&ioc->sas_device_lock, flags); - list_del(&sas_device->list); - memset(sas_device, 0, sizeof(struct _sas_device)); - kfree(sas_device); + if (mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_device->sas_address)) { + list_del(&sas_device->list); + kfree(sas_device); + } spin_unlock_irqrestore(&ioc->sas_device_lock, flags); } -- cgit v1.2.2 From aea20f9540e615f158536b777f7f9ac646427f98 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Thu, 8 Apr 2010 17:55:52 +0530 Subject: [SCSI] mpt2sas: Bump version 05.100.00.02 Upgrade version to 05.100.00.02 Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 21aa397bf8d8..b4afe431ac1e 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -69,11 +69,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "05.100.00.01" +#define MPT2SAS_DRIVER_VERSION "05.100.00.02" #define MPT2SAS_MAJOR_VERSION 05 #define MPT2SAS_MINOR_VERSION 100 #define MPT2SAS_BUILD_VERSION 00 -#define MPT2SAS_RELEASE_VERSION 01 +#define MPT2SAS_RELEASE_VERSION 02 /* * Set MPT2SAS_SG_DEPTH value based on user input. -- cgit v1.2.2 From 593abc0720d5639ba21834b082adf83762af39be Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 9 Apr 2010 14:22:17 -0700 Subject: [SCSI] libfcoe: Don't fill MAC desc in FLOGI if FIP negotiated FPMA FPMA indicates that the Fabric will provide the host's N_Port's MAC address. When sending a FLOGI/FDISC frame and FPMA was negotiated through FIP discovery we still need to provide the MAC descriptor, as per the specification, but the MAC should be zero'd out since the FCF will be providing it in the FLOGI/FDISC ACC. In FC-BB-5 section 7.8.7.4.2 (Fabric login) it states: The MAC address field in the MAC address descriptor of a FIP FLOGI Request operation or a FIP NPIV FDISC Request operation shall contain: a) the proposed MAC address to use as VN_Port MAC address if the ENode is requesting to use SPMA (see table 27); b) all zeroes to indicate no MAC address is proposed if the ENode is requesting to use FPMA (see table 27); or c) the proposed MAC address to use as VN_Port MAC address if the ENode supports both SPMA and FPMA and leaves the decision of which addressing scheme to use to the FCF (i.e., if both the FP and SP bits are set to one, see table 27). This patch fixes case B. This patch also adds debug statements to illustrate whether a FPMA or SPMA MAC is added to a FLOGI/FDISC frame. Signed-off-by: Robert Love Signed-off-by: Chris Leech Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index ff5ccba3d741..de5c329cb3b4 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -442,10 +442,15 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport, memset(mac, 0, sizeof(mac)); mac->fd_desc.fip_dtype = FIP_DT_MAC; mac->fd_desc.fip_dlen = sizeof(*mac) / FIP_BPW; - if (dtype != FIP_DT_FLOGI && dtype != FIP_DT_FDISC) + if (dtype != FIP_DT_FLOGI && dtype != FIP_DT_FDISC) { memcpy(mac->fd_mac, fip->get_src_addr(lport), ETH_ALEN); - else if (fip->spma) + } else if (fip_flags & FIP_FL_SPMA) { + LIBFCOE_FIP_DBG(fip, "FLOGI/FDISC sent with SPMA\n"); memcpy(mac->fd_mac, fip->ctl_src_addr, ETH_ALEN); + } else { + LIBFCOE_FIP_DBG(fip, "FLOGI/FDISC sent with FPMA\n"); + /* FPMA only FLOGI must leave the MAC desc set to all 0s */ + } skb->protocol = htons(ETH_P_FIP); skb_reset_mac_header(skb); -- cgit v1.2.2 From 9ee50e48d8370dbcb42fa5b62b5bb3a9877e1f47 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 9 Apr 2010 14:22:23 -0700 Subject: [SCSI] fcoe: reset FIP ctlr link state on disable/enable The FIP controler state wasn't being reset on a disable. A disable/enable sequence should be treated as a link event. Otherwise, when using disable to mask a time when the link is up but unusable, FCF discovery would attempt to continue and login would jump directly to the non-FIP fallback on enable. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 927b3e63d871..0d8127e58feb 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -1901,9 +1901,10 @@ static int fcoe_disable(const char *buffer, struct kernel_param *kp) fcoe = fcoe_hostlist_lookup_port(netdev); rtnl_unlock(); - if (fcoe) + if (fcoe) { fc_fabric_logoff(fcoe->ctlr.lp); - else + fcoe_ctlr_link_down(&fcoe->ctlr); + } else rc = -ENODEV; dev_put(netdev); @@ -1950,9 +1951,11 @@ static int fcoe_enable(const char *buffer, struct kernel_param *kp) fcoe = fcoe_hostlist_lookup_port(netdev); rtnl_unlock(); - if (fcoe) + if (fcoe) { + if (!fcoe_link_ok(fcoe->ctlr.lp)) + fcoe_ctlr_link_up(&fcoe->ctlr); rc = fc_fabric_login(fcoe->ctlr.lp); - else + } else rc = -ENODEV; dev_put(netdev); -- cgit v1.2.2 From 03d29bc1d58dcfc2fa30aed7af199f24444c2052 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 9 Apr 2010 14:22:28 -0700 Subject: [SCSI] fcoe: check netif operstate instead of IFF_UP & link state Allow for dormant states while link configuration completes. In the default link mode, this is equivalent to the old check. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 0d8127e58feb..d16dd1232572 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -2148,8 +2148,7 @@ int fcoe_link_ok(struct fc_lport *lport) struct net_device *netdev = port->fcoe->netdev; struct ethtool_cmd ecmd = { ETHTOOL_GSET }; - if ((netdev->flags & IFF_UP) && netif_carrier_ok(netdev) && - (!dev_ethtool_get_settings(netdev, &ecmd))) { + if (netif_oper_up(netdev) && !dev_ethtool_get_settings(netdev, &ecmd)) { lport->link_supported_speeds &= ~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT); if (ecmd.supported & (SUPPORTED_1000baseT_Half | -- cgit v1.2.2 From 3b719d01617288f4c11307fcb933997d7ca895c3 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 9 Apr 2010 14:22:33 -0700 Subject: [SCSI] libfc: remove unneeded variables in fc_exch_recv_req() fc_exch_recv_req has variables eof, sof, and f_ctl, which are set but never used. Delete them. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index d0496dafd84a..daff880e426e 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1241,9 +1241,6 @@ static void fc_exch_recv_req(struct fc_lport *lport, struct fc_exch_mgr *mp, struct fc_frame_header *fh = fc_frame_header_get(fp); struct fc_seq *sp = NULL; struct fc_exch *ep = NULL; - enum fc_sof sof; - enum fc_eof eof; - u32 f_ctl; enum fc_pf_rjt_reason reject; /* We can have the wrong fc_lport at this point with NPIV, which is a @@ -1260,9 +1257,6 @@ static void fc_exch_recv_req(struct fc_lport *lport, struct fc_exch_mgr *mp, if (reject == FC_RJT_NONE) { sp = fr_seq(fp); /* sequence will be held */ ep = fc_seq_exch(sp); - sof = fr_sof(fp); - eof = fr_eof(fp); - f_ctl = ntoh24(fh->fh_f_ctl); fc_seq_send_ack(sp, fp); /* -- cgit v1.2.2 From 0b2f74a47f2b10bd4c70324820a93c070b3960a5 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 9 Apr 2010 14:22:39 -0700 Subject: [SCSI] libfc: fix hton24 macro to take expressions as args hton24(p + 3, value) would fail to compile because p + 3[0] is not a valid expression. Went ahead and converted hton24 and ntoh24 to inline functions, which is better because the parameters are evalutated only once. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- include/scsi/libfc.h | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 8d0d1b2d8258..a26bb50c0c8b 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -47,13 +47,18 @@ #define ntohll(x) be64_to_cpu(x) #define htonll(x) cpu_to_be64(x) -#define ntoh24(p) (((p)[0] << 16) | ((p)[1] << 8) | ((p)[2])) -#define hton24(p, v) do { \ - p[0] = (((v) >> 16) & 0xFF); \ - p[1] = (((v) >> 8) & 0xFF); \ - p[2] = ((v) & 0xFF); \ - } while (0) +static inline u32 ntoh24(const u8 *p) +{ + return (p[0] << 16) | (p[1] << 8) | p[2]; +} + +static inline void hton24(u8 *p, u32 v) +{ + p[0] = (v >> 16) & 0xff; + p[1] = (v >> 8) & 0xff; + p[2] = v & 0xff; +} /** * enum fc_lport_state - Local port states -- cgit v1.2.2 From 666d07646a29040e3dc4caeb679166559e152ff2 Mon Sep 17 00:00:00 2001 From: Brian Uchino Date: Fri, 9 Apr 2010 14:22:44 -0700 Subject: [SCSI] fnic: Update version to 1.4.0.145 New fnic version to mark inclusion of tx_flush bugfix. Signed-off-by: Brian Uchino Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fnic/fnic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h index 3966c71d0095..585cc9cb942c 100644 --- a/drivers/scsi/fnic/fnic.h +++ b/drivers/scsi/fnic/fnic.h @@ -36,7 +36,7 @@ #define DRV_NAME "fnic" #define DRV_DESCRIPTION "Cisco FCoE HBA Driver" -#define DRV_VERSION "1.4.0.98" +#define DRV_VERSION "1.4.0.145" #define PFX DRV_NAME ": " #define DFX DRV_NAME "%d: " -- cgit v1.2.2 From d9e9ab56b687da0b3ecb29f7a77f25aa7ae078fb Mon Sep 17 00:00:00 2001 From: Brian Uchino Date: Fri, 9 Apr 2010 14:22:49 -0700 Subject: [SCSI] fnic: Change fnic_flush_tx() to flush tx instead of rx queue fnic_flush_tx() is used to send frames held while fabric login is in progress. The frames are held in tx_queue, but fnic_flush_tx() was incorrectly flushing from recv_queue which is used for received frames. Signed-off-by: Brian Uchino Signed-off-by: Abhijeet Joglekar Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fnic/fnic_fcs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c index 5259888fbfb1..2b48d79bad94 100644 --- a/drivers/scsi/fnic/fnic_fcs.c +++ b/drivers/scsi/fnic/fnic_fcs.c @@ -617,7 +617,7 @@ void fnic_flush_tx(struct fnic *fnic) struct sk_buff *skb; struct fc_frame *fp; - while ((skb = skb_dequeue(&fnic->frame_queue))) { + while ((skb = skb_dequeue(&fnic->tx_queue))) { fp = (struct fc_frame *)skb; fnic_send_frame(fnic, fp); } -- cgit v1.2.2 From 8ba00a4bbbbcb39d077e837555dfa9ff0de4202e Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 9 Apr 2010 14:22:54 -0700 Subject: [SCSI] fcoe: removes unused shost in fcoe_shost_config Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index d16dd1232572..4d46b71849ab 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -655,15 +655,13 @@ static int fcoe_netdev_config(struct fc_lport *lport, struct net_device *netdev) /** * fcoe_shost_config() - Set up the SCSI host associated with a local port * @lport: The local port - * @shost: The SCSI host to associate with the local port * @dev: The device associated with the SCSI host * * Must be called after fcoe_lport_config() and fcoe_netdev_config() * * Returns: 0 for success */ -static int fcoe_shost_config(struct fc_lport *lport, struct Scsi_Host *shost, - struct device *dev) +static int fcoe_shost_config(struct fc_lport *lport, struct device *dev) { int rc = 0; @@ -899,7 +897,6 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe, struct net_device *netdev = fcoe->netdev; struct fc_lport *lport = NULL; struct fcoe_port *port; - struct Scsi_Host *shost; int rc; /* * parent is only a vport if npiv is 1, @@ -921,7 +918,6 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe, rc = -ENOMEM; goto out; } - shost = lport->host; port = lport_priv(lport); port->lport = lport; port->fcoe = fcoe; @@ -951,7 +947,7 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe, } /* configure lport scsi host properties */ - rc = fcoe_shost_config(lport, shost, parent); + rc = fcoe_shost_config(lport, parent); if (rc) { FCOE_NETDEV_DBG(netdev, "Could not configure shost for the " "interface\n"); -- cgit v1.2.2 From da87bfab8a7e6cfd0e1e5c5874d7fd4f7d11e64e Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 9 Apr 2010 14:22:59 -0700 Subject: [SCSI] fcoe, fnic, libfc: increased CDB size to 16 bytes for fcoe. No reason to restrict CDB size to 12 bytes in fcoe, so increased to 16 so that 16 bytes SCSI CDB doesn't fail. Uses common define to set max_cmd_len for fcoe and fnic, fnic is already setting max_cmd_len to 16. sg_readcap -l fails without this fix. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 2 ++ drivers/scsi/fnic/fnic.h | 2 +- drivers/scsi/fnic/fnic_main.c | 2 +- include/scsi/libfcoe.h | 2 ++ 4 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 4d46b71849ab..25a7ce5c2d24 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -669,6 +669,8 @@ static int fcoe_shost_config(struct fc_lport *lport, struct device *dev) lport->host->max_lun = FCOE_MAX_LUN; lport->host->max_id = FCOE_MAX_FCP_TARGET; lport->host->max_channel = 0; + lport->host->max_cmd_len = FCOE_MAX_CMD_LEN; + if (lport->vport) lport->host->transportt = fcoe_vport_transport_template; else diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h index 585cc9cb942c..19338e0ba2c5 100644 --- a/drivers/scsi/fnic/fnic.h +++ b/drivers/scsi/fnic/fnic.h @@ -45,7 +45,7 @@ #define FNIC_IO_LOCKS 64 /* IO locks: power of 2 */ #define FNIC_DFLT_QUEUE_DEPTH 32 #define FNIC_STATS_RATE_LIMIT 4 /* limit rate at which stats are pulled up */ -#define FNIC_MAX_CMD_LEN 16 /* Supported CDB length */ + /* * Tag bits used for special requests. */ diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c index 97b212570bcc..265e73d9cd6f 100644 --- a/drivers/scsi/fnic/fnic_main.c +++ b/drivers/scsi/fnic/fnic_main.c @@ -556,7 +556,7 @@ static int __devinit fnic_probe(struct pci_dev *pdev, } host->max_lun = fnic->config.luns_per_tgt; host->max_id = FNIC_MAX_FCP_TARGET; - host->max_cmd_len = FNIC_MAX_CMD_LEN; + host->max_cmd_len = FCOE_MAX_CMD_LEN; fnic_get_res_counts(fnic); diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index 868ed26a9767..ec13f51531f8 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -29,6 +29,8 @@ #include #include +#define FCOE_MAX_CMD_LEN 16 /* Supported CDB length */ + /* * FIP tunable parameters. */ -- cgit v1.2.2 From 63ac4bbffb40f2cb3bc7e8b11bac47598813ea13 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 9 Apr 2010 14:23:05 -0700 Subject: [SCSI] libfc: bug in erroring out upon FCP_RSP_LEN_VAL in fc_fcp_resp fc_fcp_resp is assuming when FCP_SNS_LEN_VAL is set, the FCP_RSP_LEN_VAL is not, which is not true. This leads to not copying the sense data and error out a valid FCP_RSP. Signed-off-by: Yi Zou Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_fcp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 220c4bc536ca..f99d66fa2ef5 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -844,8 +844,7 @@ static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) * exit here */ return; - } else - goto err; + } } if (flags & FCP_SNS_LEN_VAL) { snsl = ntohl(rp_ex->fr_sns_len); -- cgit v1.2.2 From ce8b5df04292e93a117d9f863af206245bf61271 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 9 Apr 2010 14:23:10 -0700 Subject: [SCSI] libfc: set both precision and field with when printing FC IDs Most of the prints of fabric IDs were specified as %6x, which will not print any leading 0s. It's nice to see leading 0s for identifiers like this, which are a fixed length. This patch sets the precision modifier as well, making the specifier %6.6x, which forces the printing of leading 0s. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 6 +++--- drivers/scsi/libfc/fc_fcp.c | 16 ++++++++-------- drivers/scsi/libfc/fc_libfc.h | 6 +++--- drivers/scsi/libfc/fc_lport.c | 14 +++++++------- 4 files changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 1087a7f18e84..83314a18db2b 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -132,7 +132,7 @@ static void fc_disc_recv_rscn_req(struct fc_seq *sp, struct fc_frame *fp, switch (fmt) { case ELS_ADDR_FMT_PORT: FC_DISC_DBG(disc, "Port address format for port " - "(%6x)\n", ntoh24(pp->rscn_fid)); + "(%6.6x)\n", ntoh24(pp->rscn_fid)); dp = kzalloc(sizeof(*dp), GFP_KERNEL); if (!dp) { redisc = 1; @@ -449,7 +449,7 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len) } else { printk(KERN_WARNING "libfc: Failed to allocate " "memory for the newly discovered port " - "(%6x)\n", ids.port_id); + "(%6.6x)\n", ids.port_id); error = -ENOMEM; } } @@ -607,7 +607,7 @@ static void fc_disc_gpn_id_resp(struct fc_seq *sp, struct fc_frame *fp, rdata->ids.port_name = port_name; else if (rdata->ids.port_name != port_name) { FC_DISC_DBG(disc, "GPN_ID accepted. WWPN changed. " - "Port-id %x wwpn %llx\n", + "Port-id %6.6x wwpn %llx\n", rdata->ids.port_id, port_name); lport->tt.rport_logoff(rdata); diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index f99d66fa2ef5..81a7c976b373 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -489,7 +489,7 @@ crc_err: /* per cpu count, not total count, but OK for limit */ if (stats->InvalidCRCCount++ < 5) printk(KERN_WARNING "libfc: CRC error on data " - "frame for port (%6x)\n", + "frame for port (%6.6x)\n", fc_host_port_id(lport->host)); put_cpu(); /* @@ -894,7 +894,7 @@ static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp) return; } fsp->status_code = FC_DATA_OVRRUN; - FC_FCP_DBG(fsp, "tgt %6x xfer len %zx greater than expected, " + FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, " "len %x, data len %x\n", fsp->rport->port_id, fsp->xfer_len, expected_len, fsp->data_len); @@ -1562,7 +1562,7 @@ static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) break; default: - FC_FCP_DBG(fsp, "REC %p fid %x error unexpected error %d\n", + FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n", fsp, fsp->rport->port_id, error); fsp->status_code = FC_CMD_PLOGO; /* fall through */ @@ -1572,7 +1572,7 @@ static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) * Assume REC or LS_ACC was lost. * The exchange manager will have aborted REC, so retry. */ - FC_FCP_DBG(fsp, "REC fid %x error error %d retry %d/%d\n", + FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n", fsp->rport->port_id, error, fsp->recov_retry, FC_MAX_RECOV_RETRY); if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) @@ -2053,7 +2053,7 @@ int fc_eh_device_reset(struct scsi_cmnd *sc_cmd) if (lport->state != LPORT_ST_READY) return rc; - FC_SCSI_DBG(lport, "Resetting rport (%6x)\n", rport->port_id); + FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id); fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO); if (fsp == NULL) { @@ -2101,11 +2101,11 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) if (fc_fcp_lport_queue_ready(lport)) { shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded " - "on port (%6x)\n", fc_host_port_id(lport->host)); + "on port (%6.6x)\n", fc_host_port_id(lport->host)); return SUCCESS; } else { shost_printk(KERN_INFO, shost, "libfc: Host reset failed, " - "port (%6x) is not ready.\n", + "port (%6.6x) is not ready.\n", fc_host_port_id(lport->host)); return FAILED; } @@ -2191,7 +2191,7 @@ void fc_fcp_destroy(struct fc_lport *lport) if (!list_empty(&si->scsi_pkt_queue)) printk(KERN_ERR "libfc: Leaked SCSI packets when destroying " - "port (%6x)\n", fc_host_port_id(lport->host)); + "port (%6.6x)\n", fc_host_port_id(lport->host)); mempool_destroy(si->scsi_pkt_pool); kfree(si); diff --git a/drivers/scsi/libfc/fc_libfc.h b/drivers/scsi/libfc/fc_libfc.h index 741fd5c72e13..efc6b3fe6f35 100644 --- a/drivers/scsi/libfc/fc_libfc.h +++ b/drivers/scsi/libfc/fc_libfc.h @@ -45,7 +45,7 @@ extern unsigned int fc_debug_logging; #define FC_LPORT_DBG(lport, fmt, args...) \ FC_CHECK_LOGGING(FC_LPORT_LOGGING, \ - printk(KERN_INFO "host%u: lport %6x: " fmt, \ + printk(KERN_INFO "host%u: lport %6.6x: " fmt, \ (lport)->host->host_no, \ fc_host_port_id((lport)->host), ##args)) @@ -57,7 +57,7 @@ extern unsigned int fc_debug_logging; #define FC_RPORT_ID_DBG(lport, port_id, fmt, args...) \ FC_CHECK_LOGGING(FC_RPORT_LOGGING, \ - printk(KERN_INFO "host%u: rport %6x: " fmt, \ + printk(KERN_INFO "host%u: rport %6.6x: " fmt, \ (lport)->host->host_no, \ (port_id), ##args)) @@ -66,7 +66,7 @@ extern unsigned int fc_debug_logging; #define FC_FCP_DBG(pkt, fmt, args...) \ FC_CHECK_LOGGING(FC_FCP_LOGGING, \ - printk(KERN_INFO "host%u: fcp: %6x: " fmt, \ + printk(KERN_INFO "host%u: fcp: %6.6x: " fmt, \ (pkt)->lp->host->host_no, \ pkt->rport->port_id, ##args)) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index a6cf94d44ef8..e89bdd53acf0 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -172,7 +172,7 @@ static void fc_lport_rport_callback(struct fc_lport *lport, struct fc_rport_priv *rdata, enum fc_rport_event event) { - FC_LPORT_DBG(lport, "Received a %d event for port (%6x)\n", event, + FC_LPORT_DBG(lport, "Received a %d event for port (%6.6x)\n", event, rdata->ids.port_id); mutex_lock(&lport->lp_mutex); @@ -183,7 +183,7 @@ static void fc_lport_rport_callback(struct fc_lport *lport, fc_lport_enter_ns(lport, LPORT_ST_RNN_ID); } else { FC_LPORT_DBG(lport, "Received an READY event " - "on port (%6x) for the directory " + "on port (%6.6x) for the directory " "server, but the lport is not " "in the DNS state, it's in the " "%d state", rdata->ids.port_id, @@ -575,7 +575,7 @@ void __fc_linkup(struct fc_lport *lport) */ void fc_linkup(struct fc_lport *lport) { - printk(KERN_INFO "host%d: libfc: Link up on port (%6x)\n", + printk(KERN_INFO "host%d: libfc: Link up on port (%6.6x)\n", lport->host->host_no, fc_host_port_id(lport->host)); mutex_lock(&lport->lp_mutex); @@ -605,7 +605,7 @@ void __fc_linkdown(struct fc_lport *lport) */ void fc_linkdown(struct fc_lport *lport) { - printk(KERN_INFO "host%d: libfc: Link down on port (%6x)\n", + printk(KERN_INFO "host%d: libfc: Link down on port (%6.6x)\n", lport->host->host_no, fc_host_port_id(lport->host)); mutex_lock(&lport->lp_mutex); @@ -707,7 +707,7 @@ void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event) break; case DISC_EV_FAILED: printk(KERN_ERR "host%d: libfc: " - "Discovery failed for port (%6x)\n", + "Discovery failed for port (%6.6x)\n", lport->host->host_no, fc_host_port_id(lport->host)); mutex_lock(&lport->lp_mutex); fc_lport_enter_reset(lport); @@ -753,7 +753,7 @@ static void fc_lport_set_port_id(struct fc_lport *lport, u32 port_id, struct fc_frame *fp) { if (port_id) - printk(KERN_INFO "host%d: Assigned Port ID %6x\n", + printk(KERN_INFO "host%d: Assigned Port ID %6.6x\n", lport->host->host_no, port_id); fc_host_port_id(lport->host) = port_id; @@ -1499,7 +1499,7 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, lport->r_a_tov = 2 * e_d_tov; fc_lport_set_port_id(lport, did, fp); printk(KERN_INFO "host%d: libfc: " - "Port (%6x) entered " + "Port (%6.6x) entered " "point-to-point mode\n", lport->host->host_no, did); fc_lport_ptp_setup(lport, ntoh24(fh->fh_s_id), -- cgit v1.2.2 From 9f8f3aa640ae5da220eea95215317f19ace91481 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Fri, 9 Apr 2010 14:23:16 -0700 Subject: [SCSI] libfc, fcoe: normalize format specifies for world wide names Print all world wide node names (node, port and fabric) with the same format specifier of "%16.16llx". That makes sure they all print as a 16 character hex string, with lower case letters, no 0x prefix, and without stripping off any leading 0s. Signed-off-by: Chris Leech Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 3 ++- drivers/scsi/fcoe/libfcoe.c | 21 ++++++++++++--------- drivers/scsi/libfc/fc_disc.c | 2 +- drivers/scsi/libfc/fc_lport.c | 4 ++-- 4 files changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 25a7ce5c2d24..aba839e68014 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -934,7 +934,8 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe, } if (npiv) { - FCOE_NETDEV_DBG(netdev, "Setting vport names, 0x%llX 0x%llX\n", + FCOE_NETDEV_DBG(netdev, "Setting vport names, " + "%16.16llx %16.16llx\n", vport->node_name, vport->port_name); fc_set_wwnn(lport, vport->node_name); fc_set_wwpn(lport, vport->port_name); diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index de5c329cb3b4..aadd24962e92 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -583,7 +583,7 @@ static void fcoe_ctlr_age_fcfs(struct fcoe_ctlr *fip) smp_processor_id()); stats->MissDiscAdvCount++; printk(KERN_INFO "libfcoe: host%d: Missing Discovery " - "Advertisement for fab %llx count %lld\n", + "Advertisement for fab %16.16llx count %lld\n", fip->lp->host->host_no, fcf->fabric_name, stats->MissDiscAdvCount); } @@ -780,7 +780,8 @@ static void fcoe_ctlr_recv_adv(struct fcoe_ctlr *fip, struct sk_buff *skb) mtu_valid = fcoe_ctlr_mtu_valid(fcf); fcf->time = jiffies; if (!found) { - LIBFCOE_FIP_DBG(fip, "New FCF for fab %llx map %x val %d\n", + LIBFCOE_FIP_DBG(fip, "New FCF for fab %16.16llx " + "map %x val %d\n", fcf->fabric_name, fcf->fc_map, mtu_valid); } @@ -1108,15 +1109,17 @@ static void fcoe_ctlr_select(struct fcoe_ctlr *fip) struct fcoe_fcf *best = NULL; list_for_each_entry(fcf, &fip->fcfs, list) { - LIBFCOE_FIP_DBG(fip, "consider FCF for fab %llx VFID %d map %x " - "val %d\n", fcf->fabric_name, fcf->vfid, + LIBFCOE_FIP_DBG(fip, "consider FCF for fab %16.16llx " + "VFID %d map %x val %d\n", + fcf->fabric_name, fcf->vfid, fcf->fc_map, fcoe_ctlr_mtu_valid(fcf)); if (!fcoe_ctlr_fcf_usable(fcf)) { - LIBFCOE_FIP_DBG(fip, "FCF for fab %llx map %x %svalid " - "%savailable\n", fcf->fabric_name, - fcf->fc_map, (fcf->flags & FIP_FL_SOL) - ? "" : "in", (fcf->flags & FIP_FL_AVAIL) - ? "" : "un"); + LIBFCOE_FIP_DBG(fip, "FCF for fab %16.16llx " + "map %x %svalid %savailable\n", + fcf->fabric_name, fcf->fc_map, + (fcf->flags & FIP_FL_SOL) ? "" : "in", + (fcf->flags & FIP_FL_AVAIL) ? + "" : "un"); continue; } if (!best) { diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 83314a18db2b..b292272d296f 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -607,7 +607,7 @@ static void fc_disc_gpn_id_resp(struct fc_seq *sp, struct fc_frame *fp, rdata->ids.port_name = port_name; else if (rdata->ids.port_name != port_name) { FC_DISC_DBG(disc, "GPN_ID accepted. WWPN changed. " - "Port-id %6.6x wwpn %llx\n", + "Port-id %6.6x wwpn %16.16llx\n", rdata->ids.port_id, port_name); lport->tt.rport_logoff(rdata); diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index e89bdd53acf0..ef25e11abd33 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -800,11 +800,11 @@ static void fc_lport_recv_flogi_req(struct fc_seq *sp_in, remote_wwpn = get_unaligned_be64(&flp->fl_wwpn); if (remote_wwpn == lport->wwpn) { printk(KERN_WARNING "host%d: libfc: Received FLOGI from port " - "with same WWPN %llx\n", + "with same WWPN %16.16llx\n", lport->host->host_no, remote_wwpn); goto out; } - FC_LPORT_DBG(lport, "FLOGI from port WWPN %llx\n", remote_wwpn); + FC_LPORT_DBG(lport, "FLOGI from port WWPN %16.16llx\n", remote_wwpn); /* * XXX what is the right thing to do for FIDs? -- cgit v1.2.2 From ef7d17a907d89d590831a3995ed8638a9ad394bc Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 9 Apr 2010 22:07:36 -0500 Subject: [SCSI] iscsi_tcp: change & to && This change is basically a clean up. datadgst_en is an int which comes from the user. I didn't see anything limiting it to 1 and 0 although obviously that's what it's supposed to be. If the user passed in 2 this test would fail. This same if condition is repeated in another function and it uses && there. Signed-off-by: Dan Carpenter Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi_tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 5c92620292fb..8eeb39ffa37f 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -421,7 +421,7 @@ iscsi_tcp_data_recv_prep(struct iscsi_tcp_conn *tcp_conn) struct iscsi_conn *conn = tcp_conn->iscsi_conn; struct hash_desc *rx_hash = NULL; - if (conn->datadgst_en & + if (conn->datadgst_en && !(conn->session->tt->caps & CAP_DIGEST_OFFLOAD)) rx_hash = tcp_conn->rx_hash; -- cgit v1.2.2 From 5738d4449c1baf05e8345684d12371f76296473d Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 9 Apr 2010 22:07:37 -0500 Subject: [SCSI] scsi_dh_emc: request flag cleanup blk_get_request sets the cmd_flags, so we should not and do not need to set them. If we did set them to a different value then it can cause a oops in the elevator code. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/device_handler/scsi_dh_emc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c index e8a0bc3efd49..6faf472f7537 100644 --- a/drivers/scsi/device_handler/scsi_dh_emc.c +++ b/drivers/scsi/device_handler/scsi_dh_emc.c @@ -285,13 +285,11 @@ static struct request *get_req(struct scsi_device *sdev, int cmd, switch (cmd) { case MODE_SELECT: len = sizeof(short_trespass); - rq->cmd_flags |= REQ_RW; rq->cmd[1] = 0x10; rq->cmd[4] = len; break; case MODE_SELECT_10: len = sizeof(long_trespass); - rq->cmd_flags |= REQ_RW; rq->cmd[1] = 0x10; rq->cmd[8] = len; break; -- cgit v1.2.2 From c484a50a4db33c3d69a7750fd4fbf7b60d39940d Mon Sep 17 00:00:00 2001 From: Avi Kaplan Date: Fri, 9 Apr 2010 22:07:38 -0500 Subject: [SCSI] iscsi_tcp: Change iscsi_sw_tcp_conn_restore_callbacks arguments This patch changes the arguments to iscsi_sw_tcp_conn_restore_callbacks, so that it works like the function to set the callbacks and because in upcoming patches we need a iscsi_conn. Signed-off-by: Avi Kaplan Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 0ee725ced511..d0bb1f9c5741 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -206,8 +206,10 @@ static void iscsi_sw_tcp_conn_set_callbacks(struct iscsi_conn *conn) } static void -iscsi_sw_tcp_conn_restore_callbacks(struct iscsi_sw_tcp_conn *tcp_sw_conn) +iscsi_sw_tcp_conn_restore_callbacks(struct iscsi_conn *conn) { + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data; struct sock *sk = tcp_sw_conn->sock->sk; /* restore socket callbacks, see also: iscsi_conn_set_callbacks() */ @@ -555,7 +557,7 @@ static void iscsi_sw_tcp_release_conn(struct iscsi_conn *conn) return; sock_hold(sock->sk); - iscsi_sw_tcp_conn_restore_callbacks(tcp_sw_conn); + iscsi_sw_tcp_conn_restore_callbacks(conn); sock_put(sock->sk); spin_lock_bh(&session->lock); -- cgit v1.2.2 From c8032216c9607ee8c62a39484711750c1445c6a4 Mon Sep 17 00:00:00 2001 From: Avi Kaplan Date: Fri, 9 Apr 2010 22:07:39 -0500 Subject: [SCSI] iscsi_tcp: Remove unused field iscsi_conn from struct iscsi_sw_tcp_conn iscsi_conn is not used so remove it from iscsi_sw_tcp_conn. Signed-off-by: Avi Kaplan Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h index ca6b7bc64de0..94644bad0ed7 100644 --- a/drivers/scsi/iscsi_tcp.h +++ b/drivers/scsi/iscsi_tcp.h @@ -36,7 +36,6 @@ struct iscsi_sw_tcp_send { }; struct iscsi_sw_tcp_conn { - struct iscsi_conn *iscsi_conn; struct socket *sock; struct iscsi_sw_tcp_send out; -- cgit v1.2.2 From 9dc9fd9484c5168d23fe855e6c56543d96b6695b Mon Sep 17 00:00:00 2001 From: Srinivas Date: Mon, 15 Feb 2010 00:00:00 -0600 Subject: [SCSI] mvsas: fix hot plug handling and IO issues This patch adds a bunch of fixes 1. Reduce sg table size to 64 (SG_MX) instead of default SG_ALL 2. clear task lists on phy down events 3. release all tasks on port deformation 4. release current task for device gone notification 5. Add sata abort handing 6. Add 10ms delay to each port reset (currently done serially and with interrupts disabled) [jejb: whitespace fixes and clean ups plus added description added dummy 94xx_clear_srs_irq function just to prevent the mismatch in the mvs_dispatch structure killing 94xx cards] Signed-off-by: Srinivas Cc: Andy Yan Cc: qswang@marvell.com Cc: jfeng@marvell.com Signed-off-by: James Bottomley --- drivers/scsi/mvsas/mv_64xx.c | 25 +++++- drivers/scsi/mvsas/mv_94xx.c | 10 +++ drivers/scsi/mvsas/mv_init.c | 19 ++-- drivers/scsi/mvsas/mv_sas.c | 201 ++++++++++++++++++++++++++++--------------- drivers/scsi/mvsas/mv_sas.h | 11 ++- 5 files changed, 186 insertions(+), 80 deletions(-) diff --git a/drivers/scsi/mvsas/mv_64xx.c b/drivers/scsi/mvsas/mv_64xx.c index 10a5077b6aed..afc7f6f3a13e 100644 --- a/drivers/scsi/mvsas/mv_64xx.c +++ b/drivers/scsi/mvsas/mv_64xx.c @@ -132,9 +132,9 @@ static void mvs_64xx_phy_reset(struct mvs_info *mvi, u32 phy_id, int hard) tmp &= ~PHYEV_RDY_CH; mvs_write_port_irq_stat(mvi, phy_id, tmp); tmp = mvs_read_phy_ctl(mvi, phy_id); - if (hard) + if (hard == 1) tmp |= PHY_RST_HARD; - else + else if (hard == 0) tmp |= PHY_RST; mvs_write_phy_ctl(mvi, phy_id, tmp); if (hard) { @@ -144,6 +144,26 @@ static void mvs_64xx_phy_reset(struct mvs_info *mvi, u32 phy_id, int hard) } } +void mvs_64xx_clear_srs_irq(struct mvs_info *mvi, u8 reg_set, u8 clear_all) +{ + void __iomem *regs = mvi->regs; + u32 tmp; + if (clear_all) { + tmp = mr32(MVS_INT_STAT_SRS_0); + if (tmp) { + printk(KERN_DEBUG "check SRS 0 %08X.\n", tmp); + mw32(MVS_INT_STAT_SRS_0, tmp); + } + } else { + tmp = mr32(MVS_INT_STAT_SRS_0); + if (tmp & (1 << (reg_set % 32))) { + printk(KERN_DEBUG "register set 0x%x was stopped.\n", + reg_set); + mw32(MVS_INT_STAT_SRS_0, 1 << (reg_set % 32)); + } + } +} + static int __devinit mvs_64xx_chip_reset(struct mvs_info *mvi) { void __iomem *regs = mvi->regs; @@ -761,6 +781,7 @@ const struct mvs_dispatch mvs_64xx_dispatch = { mvs_write_port_irq_mask, mvs_get_sas_addr, mvs_64xx_command_active, + mvs_64xx_clear_srs_irq, mvs_64xx_issue_stop, mvs_start_delivery, mvs_rx_update, diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c index 0940fae19d20..eed4c5c72013 100644 --- a/drivers/scsi/mvsas/mv_94xx.c +++ b/drivers/scsi/mvsas/mv_94xx.c @@ -616,6 +616,15 @@ void mvs_94xx_fix_dma(dma_addr_t buf_dma, int buf_len, int from, void *prd) } #endif +/* + * FIXME JEJB: temporary nop clear_srs_irq to make 94xx still work + * with 64xx fixes + */ +static void mvs_94xx_clear_srs_irq(struct mvs_info *mvi, u8 reg_set, + u8 clear_all) +{ +} + const struct mvs_dispatch mvs_94xx_dispatch = { "mv94xx", mvs_94xx_init, @@ -640,6 +649,7 @@ const struct mvs_dispatch mvs_94xx_dispatch = { mvs_write_port_irq_mask, mvs_get_sas_addr, mvs_94xx_command_active, + mvs_94xx_clear_srs_irq, mvs_94xx_issue_stop, mvs_start_delivery, mvs_rx_update, diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index cae6b2cf492f..19ad34f381a5 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -37,6 +37,7 @@ static const struct mvs_chip_info mvs_chips[] = { }; #define SOC_SAS_NUM 2 +#define SG_MX 64 static struct scsi_host_template mvs_sht = { .module = THIS_MODULE, @@ -53,10 +54,10 @@ static struct scsi_host_template mvs_sht = { .can_queue = 1, .cmd_per_lun = 1, .this_id = -1, - .sg_tablesize = SG_ALL, + .sg_tablesize = SG_MX, .max_sectors = SCSI_DEFAULT_MAX_SECTORS, .use_clustering = ENABLE_CLUSTERING, - .eh_device_reset_handler = sas_eh_device_reset_handler, + .eh_device_reset_handler = sas_eh_device_reset_handler, .eh_bus_reset_handler = sas_eh_bus_reset_handler, .slave_alloc = mvs_slave_alloc, .target_destroy = sas_target_destroy, @@ -65,19 +66,17 @@ static struct scsi_host_template mvs_sht = { static struct sas_domain_function_template mvs_transport_ops = { .lldd_dev_found = mvs_dev_found, - .lldd_dev_gone = mvs_dev_gone, - + .lldd_dev_gone = mvs_dev_gone, .lldd_execute_task = mvs_queue_command, .lldd_control_phy = mvs_phy_control, .lldd_abort_task = mvs_abort_task, .lldd_abort_task_set = mvs_abort_task_set, .lldd_clear_aca = mvs_clear_aca, - .lldd_clear_task_set = mvs_clear_task_set, + .lldd_clear_task_set = mvs_clear_task_set, .lldd_I_T_nexus_reset = mvs_I_T_nexus_reset, .lldd_lu_reset = mvs_lu_reset, .lldd_query_task = mvs_query_task, - .lldd_port_formed = mvs_port_formed, .lldd_port_deformed = mvs_port_deformed, @@ -213,7 +212,7 @@ static irqreturn_t mvs_interrupt(int irq, void *opaque) static int __devinit mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost) { - int i, slot_nr; + int i = 0, slot_nr; if (mvi->flags & MVF_FLAG_SOC) slot_nr = MVS_SOC_SLOTS; @@ -232,6 +231,7 @@ static int __devinit mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost) mvi->devices[i].dev_type = NO_DEVICE; mvi->devices[i].device_id = i; mvi->devices[i].dev_status = MVS_DEV_NORMAL; + init_timer(&mvi->devices[i].timer); } /* @@ -437,6 +437,7 @@ static int __devinit mvs_prep_sas_ha_init(struct Scsi_Host *shost, sha->sas_phy = arr_phy; sha->sas_port = arr_port; + sha->core.shost = shost; sha->lldd_ha = kzalloc(sizeof(struct mvs_prv_info), GFP_KERNEL); if (!sha->lldd_ha) @@ -574,6 +575,10 @@ static int __devinit mvs_pci_init(struct pci_dev *pdev, } nhost++; } while (nhost < chip->n_host); +#ifdef MVS_USE_TASKLET + tasklet_init(&mv_tasklet, mvs_tasklet, + (unsigned long)SHOST_TO_SAS_HA(shost)); +#endif mvs_post_sas_ha_init(shost, chip); diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c index 0d2138641214..f5e321791903 100644 --- a/drivers/scsi/mvsas/mv_sas.c +++ b/drivers/scsi/mvsas/mv_sas.c @@ -259,8 +259,6 @@ static inline void mvs_free_reg_set(struct mvs_info *mvi, mv_printk("device has been free.\n"); return; } - if (dev->runing_req != 0) - return; if (dev->taskfileset == MVS_ID_NOT_MAPPED) return; MVS_CHIP_DISP->free_reg_set(mvi, &dev->taskfileset); @@ -762,8 +760,6 @@ static int mvs_task_prep_ssp(struct mvs_info *mvi, } if (is_tmf) flags |= (MCH_SSP_FR_TASK << MCH_SSP_FR_TYPE_SHIFT); - else - flags |= (MCH_SSP_FR_CMD << MCH_SSP_FR_TYPE_SHIFT); hdr->flags = cpu_to_le32(flags | (tei->n_elem << MCH_PRD_LEN_SHIFT)); hdr->tags = cpu_to_le32(tag); hdr->data_len = cpu_to_le32(task->total_xfer_len); @@ -878,14 +874,15 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags, struct mvs_slot_info *slot; u32 tag = 0xdeadbeef, rc, n_elem = 0; u32 n = num, pass = 0; - unsigned long flags = 0; + unsigned long flags = 0, flags_libsas = 0; if (!dev->port) { struct task_status_struct *tsm = &t->task_status; tsm->resp = SAS_TASK_UNDELIVERED; tsm->stat = SAS_PHY_DOWN; - t->task_done(t); + if (dev->dev_type != SATA_DEV) + t->task_done(t); return 0; } @@ -910,12 +907,25 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags, else tei.port = &mvi->port[dev->port->id]; - if (!tei.port->port_attached) { + if (tei.port && !tei.port->port_attached) { if (sas_protocol_ata(t->task_proto)) { + struct task_status_struct *ts = &t->task_status; + mv_dprintk("port %d does not" "attached device.\n", dev->port->id); - rc = SAS_PHY_DOWN; - goto out_done; + ts->stat = SAS_PROTO_RESPONSE; + ts->stat = SAS_PHY_DOWN; + spin_unlock_irqrestore(dev->sata_dev.ap->lock, + flags_libsas); + spin_unlock_irqrestore(&mvi->lock, flags); + t->task_done(t); + spin_lock_irqsave(&mvi->lock, flags); + spin_lock_irqsave(dev->sata_dev.ap->lock, + flags_libsas); + if (n > 1) + t = list_entry(t->list.next, + struct sas_task, list); + continue; } else { struct task_status_struct *ts = &t->task_status; ts->resp = SAS_TASK_UNDELIVERED; @@ -973,8 +983,8 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags, break; default: dev_printk(KERN_ERR, mvi->dev, - "unknown sas_task proto: 0x%x\n", - t->task_proto); + "unknown sas_task proto: 0x%x\n", + t->task_proto); rc = -EINVAL; break; } @@ -993,11 +1003,15 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags, spin_unlock(&t->task_state_lock); mvs_hba_memory_dump(mvi, tag, t->task_proto); - mvi_dev->runing_req++; + mvi_dev->running_req++; ++pass; mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1); if (n > 1) t = list_entry(t->list.next, struct sas_task, list); + if (likely(pass)) + MVS_CHIP_DISP->start_delivery(mvi, (mvi->tx_prod - 1) & + (MVS_CHIP_SLOT_SZ - 1)); + } while (--n); rc = 0; goto out_done; @@ -1012,10 +1026,6 @@ err_out: dma_unmap_sg(mvi->dev, t->scatter, n_elem, t->data_dir); out_done: - if (likely(pass)) { - MVS_CHIP_DISP->start_delivery(mvi, - (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1)); - } spin_unlock_irqrestore(&mvi->lock, flags); return rc; } @@ -1187,7 +1197,7 @@ void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st) MVS_CHIP_DISP->phy_reset(mvi, i, 0); goto out_done; } - } else if (phy->phy_type & PORT_TYPE_SAS + } else if (phy->phy_type & PORT_TYPE_SAS || phy->att_dev_info & PORT_SSP_INIT_MASK) { phy->phy_attached = 1; phy->identify.device_type = @@ -1256,7 +1266,20 @@ static void mvs_port_notify_formed(struct asd_sas_phy *sas_phy, int lock) static void mvs_port_notify_deformed(struct asd_sas_phy *sas_phy, int lock) { - /*Nothing*/ + struct domain_device *dev; + struct mvs_phy *phy = sas_phy->lldd_phy; + struct mvs_info *mvi = phy->mvi; + struct asd_sas_port *port = sas_phy->port; + int phy_no = 0; + + while (phy != &mvi->phy[phy_no]) { + phy_no++; + if (phy_no >= MVS_MAX_PHYS) + return; + } + list_for_each_entry(dev, &port->dev_list, dev_list_node) + mvs_do_release_task(phy->mvi, phy_no, NULL); + } @@ -1316,6 +1339,7 @@ int mvs_dev_found_notify(struct domain_device *dev, int lock) goto found_out; } dev->lldd_dev = mvi_device; + mvi_device->dev_status = MVS_DEV_NORMAL; mvi_device->dev_type = dev->dev_type; mvi_device->mvi_info = mvi; if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) { @@ -1351,18 +1375,18 @@ int mvs_dev_found(struct domain_device *dev) return mvs_dev_found_notify(dev, 1); } -void mvs_dev_gone_notify(struct domain_device *dev, int lock) +void mvs_dev_gone_notify(struct domain_device *dev) { unsigned long flags = 0; struct mvs_device *mvi_dev = dev->lldd_dev; struct mvs_info *mvi = mvi_dev->mvi_info; - if (lock) - spin_lock_irqsave(&mvi->lock, flags); + spin_lock_irqsave(&mvi->lock, flags); if (mvi_dev) { mv_dprintk("found dev[%d:%x] is gone.\n", mvi_dev->device_id, mvi_dev->dev_type); + mvs_release_task(mvi, dev); mvs_free_reg_set(mvi, mvi_dev); mvs_free_dev(mvi_dev); } else { @@ -1370,14 +1394,13 @@ void mvs_dev_gone_notify(struct domain_device *dev, int lock) } dev->lldd_dev = NULL; - if (lock) - spin_unlock_irqrestore(&mvi->lock, flags); + spin_unlock_irqrestore(&mvi->lock, flags); } void mvs_dev_gone(struct domain_device *dev) { - mvs_dev_gone_notify(dev, 1); + mvs_dev_gone_notify(dev); } static struct sas_task *mvs_alloc_task(void) @@ -1540,7 +1563,7 @@ int mvs_lu_reset(struct domain_device *dev, u8 *lun) num = mvs_find_dev_phyno(dev, phyno); spin_lock_irqsave(&mvi->lock, flags); for (i = 0; i < num; i++) - mvs_release_task(mvi, phyno[i], dev); + mvs_release_task(mvi, dev); spin_unlock_irqrestore(&mvi->lock, flags); } /* If failed, fall-through I_T_Nexus reset */ @@ -1552,8 +1575,8 @@ int mvs_lu_reset(struct domain_device *dev, u8 *lun) int mvs_I_T_nexus_reset(struct domain_device *dev) { unsigned long flags; - int i, phyno[WIDE_PORT_MAX_PHY], num , rc = TMF_RESP_FUNC_FAILED; - struct mvs_device * mvi_dev = (struct mvs_device *)dev->lldd_dev; + int rc = TMF_RESP_FUNC_FAILED; + struct mvs_device * mvi_dev = (struct mvs_device *)dev->lldd_dev; struct mvs_info *mvi = mvi_dev->mvi_info; if (mvi_dev->dev_status != MVS_DEV_EH) @@ -1563,10 +1586,8 @@ int mvs_I_T_nexus_reset(struct domain_device *dev) __func__, mvi_dev->device_id, rc); /* housekeeper */ - num = mvs_find_dev_phyno(dev, phyno); spin_lock_irqsave(&mvi->lock, flags); - for (i = 0; i < num; i++) - mvs_release_task(mvi, phyno[i], dev); + mvs_release_task(mvi, dev); spin_unlock_irqrestore(&mvi->lock, flags); return rc; @@ -1603,6 +1624,9 @@ int mvs_query_task(struct sas_task *task) case TMF_RESP_FUNC_FAILED: case TMF_RESP_FUNC_COMPLETE: break; + default: + rc = TMF_RESP_FUNC_COMPLETE; + break; } } mv_printk("%s:rc= %d\n", __func__, rc); @@ -1621,8 +1645,11 @@ int mvs_abort_task(struct sas_task *task) unsigned long flags; u32 tag; - if (mvi->exp_req) - mvi->exp_req--; + if (!mvi_dev) { + mv_printk("%s:%d TMF_RESP_FUNC_FAILED\n", __func__, __LINE__); + rc = TMF_RESP_FUNC_FAILED; + } + spin_lock_irqsave(&task->task_state_lock, flags); if (task->task_state_flags & SAS_TASK_STATE_DONE) { spin_unlock_irqrestore(&task->task_state_lock, flags); @@ -1630,6 +1657,7 @@ int mvs_abort_task(struct sas_task *task) goto out; } spin_unlock_irqrestore(&task->task_state_lock, flags); + mvi_dev->dev_status = MVS_DEV_EH; if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) { struct scsi_cmnd * cmnd = (struct scsi_cmnd *)task->uldd_task; @@ -1654,12 +1682,31 @@ int mvs_abort_task(struct sas_task *task) if (task->lldd_task) { slot = task->lldd_task; slot_no = (u32) (slot - mvi->slot_info); + spin_lock_irqsave(&mvi->lock, flags); mvs_slot_complete(mvi, slot_no, 1); + spin_unlock_irqrestore(&mvi->lock, flags); } } + } else if (task->task_proto & SAS_PROTOCOL_SATA || task->task_proto & SAS_PROTOCOL_STP) { /* to do free register_set */ + if (SATA_DEV == dev->dev_type) { + struct mvs_slot_info *slot = task->lldd_task; + struct task_status_struct *tstat; + u32 slot_idx = (u32)(slot - mvi->slot_info); + tstat = &task->task_status; + mv_dprintk(KERN_DEBUG "mv_abort_task() mvi=%p task=%p " + "slot=%p slot_idx=x%x\n", + mvi, task, slot, slot_idx); + tstat->stat = SAS_ABORTED_TASK; + if (mvi_dev && mvi_dev->running_req) + mvi_dev->running_req--; + if (sas_protocol_ata(task->task_proto)) + mvs_free_reg_set(mvi, mvi_dev); + mvs_slot_task_free(mvi, task, slot, slot_idx); + return -1; + } } else { /* SMP */ @@ -1717,8 +1764,13 @@ static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task, SATA_RECEIVED_D2H_FIS(mvi_dev->taskfileset), sizeof(struct dev_to_host_fis)); tstat->buf_valid_size = sizeof(*resp); - if (unlikely(err)) - stat = SAS_PROTO_RESPONSE; + if (unlikely(err)) { + if (unlikely(err & CMD_ISS_STPD)) + stat = SAS_OPEN_REJECT; + else + stat = SAS_PROTO_RESPONSE; + } + return stat; } @@ -1753,9 +1805,7 @@ static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task, mv_printk("find reserved error, why?\n"); task->ata_task.use_ncq = 0; - stat = SAS_PROTO_RESPONSE; - mvs_sata_done(mvi, task, slot_idx, 1); - + mvs_sata_done(mvi, task, slot_idx, err_dw0); } break; default: @@ -1772,18 +1822,20 @@ int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags) struct sas_task *task = slot->task; struct mvs_device *mvi_dev = NULL; struct task_status_struct *tstat; + struct domain_device *dev; + u32 aborted; - bool aborted; void *to; enum exec_status sts; if (mvi->exp_req) mvi->exp_req--; - if (unlikely(!task || !task->lldd_task)) + if (unlikely(!task || !task->lldd_task || !task->dev)) return -1; tstat = &task->task_status; - mvi_dev = task->dev->lldd_dev; + dev = task->dev; + mvi_dev = dev->lldd_dev; mvs_hba_cq_dump(mvi); @@ -1800,8 +1852,8 @@ int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags) if (unlikely(aborted)) { tstat->stat = SAS_ABORTED_TASK; - if (mvi_dev) - mvi_dev->runing_req--; + if (mvi_dev && mvi_dev->running_req) + mvi_dev->running_req--; if (sas_protocol_ata(task->task_proto)) mvs_free_reg_set(mvi, mvi_dev); @@ -1809,24 +1861,17 @@ int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags) return -1; } - if (unlikely(!mvi_dev || !slot->port->port_attached || flags)) { - mv_dprintk("port has not device.\n"); + if (unlikely(!mvi_dev || flags)) { + if (!mvi_dev) + mv_dprintk("port has not device.\n"); tstat->stat = SAS_PHY_DOWN; goto out; } - /* - if (unlikely((rx_desc & RXQ_ERR) || (*(u64 *) slot->response))) { - mv_dprintk("Find device[%016llx] RXQ_ERR %X, - err info:%016llx\n", - SAS_ADDR(task->dev->sas_addr), - rx_desc, (u64)(*(u64 *) slot->response)); - } - */ - /* error info record present */ if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) { tstat->stat = mvs_slot_err(mvi, task, slot_idx); + tstat->resp = SAS_TASK_COMPLETE; goto out; } @@ -1868,11 +1913,16 @@ int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags) tstat->stat = SAM_CHECK_COND; break; } + if (!slot->port->port_attached) { + mv_dprintk("port %d has removed.\n", slot->port->sas_port.id); + tstat->stat = SAS_PHY_DOWN; + } + out: - if (mvi_dev) { - mvi_dev->runing_req--; - if (sas_protocol_ata(task->task_proto)) + if (mvi_dev && mvi_dev->running_req) { + mvi_dev->running_req--; + if (sas_protocol_ata(task->task_proto) && !mvi_dev->running_req) mvs_free_reg_set(mvi, mvi_dev); } mvs_slot_task_free(mvi, task, slot, slot_idx); @@ -1888,10 +1938,10 @@ out: return sts; } -void mvs_release_task(struct mvs_info *mvi, +void mvs_do_release_task(struct mvs_info *mvi, int phy_no, struct domain_device *dev) { - int i = 0; u32 slot_idx; + u32 slot_idx; struct mvs_phy *phy; struct mvs_port *port; struct mvs_slot_info *slot, *slot2; @@ -1900,6 +1950,10 @@ void mvs_release_task(struct mvs_info *mvi, port = phy->port; if (!port) return; + /* clean cmpl queue in case request is already finished */ + mvs_int_rx(mvi, false); + + list_for_each_entry_safe(slot, slot2, &port->list, entry) { struct sas_task *task; @@ -1911,18 +1965,22 @@ void mvs_release_task(struct mvs_info *mvi, mv_printk("Release slot [%x] tag[%x], task [%p]:\n", slot_idx, slot->slot_tag, task); - - if (task->task_proto & SAS_PROTOCOL_SSP) { - mv_printk("attached with SSP task CDB["); - for (i = 0; i < 16; i++) - mv_printk(" %02x", task->ssp_task.cdb[i]); - mv_printk(" ]\n"); - } + MVS_CHIP_DISP->command_active(mvi, slot_idx); mvs_slot_complete(mvi, slot_idx, 1); } } +void mvs_release_task(struct mvs_info *mvi, + struct domain_device *dev) +{ + int i, phyno[WIDE_PORT_MAX_PHY], num; + /* housekeeper */ + num = mvs_find_dev_phyno(dev, phyno); + for (i = 0; i < num; i++) + mvs_do_release_task(mvi, phyno[i], dev); +} + static void mvs_phy_disconnected(struct mvs_phy *phy) { phy->phy_attached = 0; @@ -2029,16 +2087,18 @@ void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events) * we need check the interrupt status which belongs to per port. */ - if (phy->irq_status & PHYEV_DCDR_ERR) + if (phy->irq_status & PHYEV_DCDR_ERR) { mv_dprintk("port %d STP decoding error.\n", - phy_no+mvi->id*mvi->chip->n_phy); + phy_no + mvi->id*mvi->chip->n_phy); + } if (phy->irq_status & PHYEV_POOF) { if (!(phy->phy_event & PHY_PLUG_OUT)) { int dev_sata = phy->phy_type & PORT_TYPE_SATA; int ready; - mvs_release_task(mvi, phy_no, NULL); + mvs_do_release_task(mvi, phy_no, NULL); phy->phy_event |= PHY_PLUG_OUT; + MVS_CHIP_DISP->clear_srs_irq(mvi, 0, 1); mvs_handle_event(mvi, (void *)(unsigned long)phy_no, PHY_PLUG_EVENT); @@ -2085,6 +2145,11 @@ void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events) phy_no, tmp); } mvs_update_phyinfo(mvi, phy_no, 0); + if (phy->phy_type & PORT_TYPE_SAS) { + MVS_CHIP_DISP->phy_reset(mvi, phy_no, 2); + mdelay(10); + } + mvs_bytes_dmaed(mvi, phy_no); /* whether driver is going to handle hot plug */ if (phy->phy_event & PHY_PLUG_OUT) { diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h index 885858bcc403..77ddc7c1e5f2 100644 --- a/drivers/scsi/mvsas/mv_sas.h +++ b/drivers/scsi/mvsas/mv_sas.h @@ -39,6 +39,7 @@ #include #include #include +#include #include #include #include @@ -49,7 +50,7 @@ #define _MV_DUMP 0 #define MVS_ID_NOT_MAPPED 0x7f /* #define DISABLE_HOTPLUG_DMA_FIX */ -#define MAX_EXP_RUNNING_REQ 2 +// #define MAX_EXP_RUNNING_REQ 2 #define WIDE_PORT_MAX_PHY 4 #define MV_DISABLE_NCQ 0 #define mv_printk(fmt, arg ...) \ @@ -129,6 +130,7 @@ struct mvs_dispatch { void (*get_sas_addr)(void *buf, u32 buflen); void (*command_active)(struct mvs_info *mvi, u32 slot_idx); + void (*clear_srs_irq)(struct mvs_info *mvi, u8 reg_set, u8 clear_all); void (*issue_stop)(struct mvs_info *mvi, enum mvs_port_type type, u32 tfs); void (*start_delivery)(struct mvs_info *mvi, u32 tx); @@ -236,9 +238,10 @@ struct mvs_device { enum sas_dev_type dev_type; struct mvs_info *mvi_info; struct domain_device *sas_device; + struct timer_list timer; u32 attached_phy; u32 device_id; - u32 runing_req; + u32 running_req; u8 taskfileset; u8 dev_status; u16 reserved; @@ -397,7 +400,9 @@ int mvs_lu_reset(struct domain_device *dev, u8 *lun); int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags); int mvs_I_T_nexus_reset(struct domain_device *dev); int mvs_query_task(struct sas_task *task); -void mvs_release_task(struct mvs_info *mvi, int phy_no, +void mvs_release_task(struct mvs_info *mvi, + struct domain_device *dev); +void mvs_do_release_task(struct mvs_info *mvi, int phy_no, struct domain_device *dev); void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events); void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st); -- cgit v1.2.2 From e308b3d19d1cf6af39024121269bb384b95d3da3 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 23 Mar 2010 01:12:27 -0400 Subject: [SCSI] scsi_debug: Block Limits VPD page fixes Add a few clarifying comments in the B0 page function and allow the optimal transfer length field to be specified on the command line using opt_blks=N. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/scsi_debug.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index a783cd33a3e4..e7b39f133482 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -108,6 +108,7 @@ static const char * scsi_debug_version_date = "20100324"; #define DEF_ATO 1 #define DEF_PHYSBLK_EXP 0 #define DEF_LOWEST_ALIGNED 0 +#define DEF_OPT_BLKS 64 #define DEF_UNMAP_MAX_BLOCKS 0 #define DEF_UNMAP_MAX_DESC 0 #define DEF_UNMAP_GRANULARITY 0 @@ -175,6 +176,7 @@ static int scsi_debug_guard = DEF_GUARD; static int scsi_debug_ato = DEF_ATO; static int scsi_debug_physblk_exp = DEF_PHYSBLK_EXP; static int scsi_debug_lowest_aligned = DEF_LOWEST_ALIGNED; +static int scsi_debug_opt_blks = DEF_OPT_BLKS; static int scsi_debug_unmap_max_desc = DEF_UNMAP_MAX_DESC; static int scsi_debug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS; static int scsi_debug_unmap_granularity = DEF_UNMAP_GRANULARITY; @@ -704,9 +706,13 @@ static int inquiry_evpd_b0(unsigned char * arr) unsigned int gran; memcpy(arr, vpdb0_data, sizeof(vpdb0_data)); + + /* Optimal transfer length granularity */ gran = 1 << scsi_debug_physblk_exp; arr[2] = (gran >> 8) & 0xff; arr[3] = gran & 0xff; + + /* Maximum Transfer Length */ if (sdebug_store_sectors > 0x400) { arr[4] = (sdebug_store_sectors >> 24) & 0xff; arr[5] = (sdebug_store_sectors >> 16) & 0xff; @@ -714,6 +720,9 @@ static int inquiry_evpd_b0(unsigned char * arr) arr[7] = sdebug_store_sectors & 0xff; } + /* Optimal Transfer Length */ + put_unaligned_be32(scsi_debug_opt_blks, &arr[8]); + if (scsi_debug_unmap_max_desc) { unsigned int blocks; @@ -722,15 +731,20 @@ static int inquiry_evpd_b0(unsigned char * arr) else blocks = 0xffffffff; + /* Maximum Unmap LBA Count */ put_unaligned_be32(blocks, &arr[16]); + + /* Maximum Unmap Block Descriptor Count */ put_unaligned_be32(scsi_debug_unmap_max_desc, &arr[20]); } + /* Unmap Granularity Alignment */ if (scsi_debug_unmap_alignment) { put_unaligned_be32(scsi_debug_unmap_alignment, &arr[28]); arr[28] |= 0x80; /* UGAVALID */ } + /* Optimal Unmap Granularity */ if (scsi_debug_unmap_granularity) { put_unaligned_be32(scsi_debug_unmap_granularity, &arr[24]); return 0x3c; /* Mandatory page length for thin provisioning */ @@ -2685,6 +2699,7 @@ module_param_named(dif, scsi_debug_dif, int, S_IRUGO); module_param_named(guard, scsi_debug_guard, int, S_IRUGO); module_param_named(ato, scsi_debug_ato, int, S_IRUGO); module_param_named(physblk_exp, scsi_debug_physblk_exp, int, S_IRUGO); +module_param_named(opt_blks, scsi_debug_opt_blks, int, S_IRUGO); module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO); module_param_named(unmap_max_blocks, scsi_debug_unmap_max_blocks, int, S_IRUGO); module_param_named(unmap_max_desc, scsi_debug_unmap_max_desc, int, S_IRUGO); @@ -2715,6 +2730,7 @@ MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)") MODULE_PARM_DESC(vpd_use_hostno, "0 -> dev ids ignore hostno (def=1 -> unique dev ids)"); MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)"); MODULE_PARM_DESC(physblk_exp, "physical block exponent (def=0)"); +MODULE_PARM_DESC(opt_blks, "optimal transfer length in block (def=64)"); MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)"); MODULE_PARM_DESC(dix, "data integrity extensions mask (def=0)"); MODULE_PARM_DESC(dif, "data integrity field type: 0-3 (def=0)"); -- cgit v1.2.2 From 59c31b69d278b760fb84266f99c1dcb0f73ec51d Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 23 Mar 2010 01:13:28 -0400 Subject: [SCSI] Add missing scsi command definitions Add definitions for VERIFY(12) and VERIFY(32). Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- include/scsi/scsi.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 832f41f37385..9ae5c613131b 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -114,6 +114,7 @@ struct scsi_cmnd; #define READ_12 0xa8 #define WRITE_12 0xaa #define WRITE_VERIFY_12 0xae +#define VERIFY_12 0xaf #define SEARCH_HIGH_12 0xb0 #define SEARCH_EQUAL_12 0xb1 #define SEARCH_LOW_12 0xb2 @@ -134,6 +135,7 @@ struct scsi_cmnd; #define MO_SET_TARGET_PGS 0x0a /* values for variable length command */ #define READ_32 0x09 +#define VERIFY_32 0x0a #define WRITE_32 0x0b #define WRITE_SAME_32 0x0d -- cgit v1.2.2 From 5a2e3995951176e1aaa63d17ae2e1d26ac99003d Mon Sep 17 00:00:00 2001 From: Kei Tokunaga Date: Thu, 1 Apr 2010 20:40:58 +0900 Subject: [SCSI] ftrace: add __print_hex() __print_hex() prints values in an array in hex (w/o '0x') (space separated) EX) 92 33 32 f3 ee 4d Signed-off-by: Li Zefan Signed-off-by: Tomohiro Kusumi Signed-off-by: Kei Tokunaga Acked-by: Steven Rostedt Signed-off-by: James Bottomley --- include/linux/ftrace_event.h | 3 +++ include/trace/ftrace.h | 3 +++ kernel/trace/trace_output.c | 15 +++++++++++++++ 3 files changed, 21 insertions(+) diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index c0f4b364c711..c3c5aaaae53a 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -25,6 +25,9 @@ const char *ftrace_print_flags_seq(struct trace_seq *p, const char *delim, const char *ftrace_print_symbols_seq(struct trace_seq *p, unsigned long val, const struct trace_print_flags *symbol_array); +const char *ftrace_print_hex_seq(struct trace_seq *p, + const unsigned char *buf, int len); + /* * The trace entry - the most basic unit of tracing. This is what * is printed in the end as a single line in the trace output, such as: diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index ea6f9d4a20e9..c48320b3dabd 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -198,6 +198,9 @@ ftrace_print_symbols_seq(p, value, symbols); \ }) +#undef __print_hex +#define __print_hex(buf, buf_len) ftrace_print_hex_seq(p, buf, buf_len) + #undef DECLARE_EVENT_CLASS #define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \ static notrace enum print_line_t \ diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index 8e46b3323cdc..7c4a0ca650b5 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -355,6 +355,21 @@ ftrace_print_symbols_seq(struct trace_seq *p, unsigned long val, } EXPORT_SYMBOL(ftrace_print_symbols_seq); +const char * +ftrace_print_hex_seq(struct trace_seq *p, const unsigned char *buf, int buf_len) +{ + int i; + const char *ret = p->buffer + p->len; + + for (i = 0; i < buf_len; i++) + trace_seq_printf(p, "%s%2.2x", i == 0 ? "" : " ", buf[i]); + + trace_seq_putc(p, 0); + + return ret; +} +EXPORT_SYMBOL(ftrace_print_hex_seq); + #ifdef CONFIG_KRETPROBES static inline const char *kretprobed(const char *name) { -- cgit v1.2.2 From bf81623542332bc2cedf3db49cbb2edb724780d2 Mon Sep 17 00:00:00 2001 From: Kei Tokunaga Date: Thu, 1 Apr 2010 20:41:40 +0900 Subject: [SCSI] add scsi trace core functions and put trace points Signed-off-by: Xiao Guangrong Signed-off-by: Tomohiro Kusumi Signed-off-by: Kei Tokunaga Signed-off-by: James Bottomley --- drivers/scsi/Makefile | 1 + drivers/scsi/scsi.c | 6 + drivers/scsi/scsi_error.c | 4 + drivers/scsi/scsi_trace.c | 185 +++++++++++++++++++++++++ include/trace/events/scsi.h | 328 ++++++++++++++++++++++++++++++++++++++++++++ kernel/trace/trace_output.c | 1 + 6 files changed, 525 insertions(+) create mode 100644 drivers/scsi/scsi_trace.c create mode 100644 include/trace/events/scsi.h diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 92a8c500b23d..1c7ac49be649 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -162,6 +162,7 @@ scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o scsi_mod-$(CONFIG_SCSI_NETLINK) += scsi_netlink.o scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o +scsi_mod-y += scsi_trace.o scsi_tgt-y += scsi_tgt_lib.o scsi_tgt_if.o diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 1c08f6164658..ad0ed212db4a 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -67,6 +67,9 @@ #include "scsi_priv.h" #include "scsi_logging.h" +#define CREATE_TRACE_POINTS +#include + static void scsi_done(struct scsi_cmnd *cmd); /* @@ -747,10 +750,12 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) cmd->result = (DID_NO_CONNECT << 16); scsi_done(cmd); } else { + trace_scsi_dispatch_cmd_start(cmd); rtn = host->hostt->queuecommand(cmd, scsi_done); } spin_unlock_irqrestore(host->host_lock, flags); if (rtn) { + trace_scsi_dispatch_cmd_error(cmd, rtn); if (rtn != SCSI_MLQUEUE_DEVICE_BUSY && rtn != SCSI_MLQUEUE_TARGET_BUSY) rtn = SCSI_MLQUEUE_HOST_BUSY; @@ -781,6 +786,7 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) */ static void scsi_done(struct scsi_cmnd *cmd) { + trace_scsi_dispatch_cmd_done(cmd); blk_complete_request(cmd->request); } diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 33175974b55a..f31d868f9362 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -39,6 +39,8 @@ #include "scsi_logging.h" #include "scsi_transport_api.h" +#include + #define SENSE_TIMEOUT (10*HZ) /* @@ -52,6 +54,7 @@ void scsi_eh_wakeup(struct Scsi_Host *shost) { if (shost->host_busy == shost->host_failed) { + trace_scsi_eh_wakeup(shost); wake_up_process(shost->ehandler); SCSI_LOG_ERROR_RECOVERY(5, printk("Waking error handler thread\n")); @@ -127,6 +130,7 @@ enum blk_eh_timer_return scsi_times_out(struct request *req) struct scsi_cmnd *scmd = req->special; enum blk_eh_timer_return rtn = BLK_EH_NOT_HANDLED; + trace_scsi_dispatch_cmd_timeout(scmd); scsi_log_completion(scmd, TIMEOUT_ERROR); if (scmd->device->host->transportt->eh_timed_out) diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c new file mode 100644 index 000000000000..9a3342a2fa36 --- /dev/null +++ b/drivers/scsi/scsi_trace.c @@ -0,0 +1,185 @@ +/* + * Copyright (C) 2010 FUJITSU LIMITED + * Copyright (C) 2010 Tomohiro Kusumi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include + +#define SERVICE_ACTION(cdb) ((cdb[8] << 8) | cdb[9]) + +static const char * +scsi_trace_misc(struct trace_seq *, unsigned char *, int); + +static const char * +scsi_trace_rw6(struct trace_seq *p, unsigned char *cdb, int len) +{ + const char *ret = p->buffer + p->len; + sector_t lba = 0, txlen = 0; + + lba |= ((cdb[1] & 0x1F) << 16); + lba |= (cdb[2] << 8); + lba |= cdb[3]; + txlen = cdb[4]; + + trace_seq_printf(p, "lba=%llu txlen=%llu", + (unsigned long long)lba, (unsigned long long)txlen); + trace_seq_putc(p, 0); + + return ret; +} + +static const char * +scsi_trace_rw10(struct trace_seq *p, unsigned char *cdb, int len) +{ + const char *ret = p->buffer + p->len; + sector_t lba = 0, txlen = 0; + + lba |= (cdb[2] << 24); + lba |= (cdb[3] << 16); + lba |= (cdb[4] << 8); + lba |= cdb[5]; + txlen |= (cdb[7] << 8); + txlen |= cdb[8]; + + trace_seq_printf(p, "lba=%llu txlen=%llu", + (unsigned long long)lba, (unsigned long long)txlen); + trace_seq_putc(p, 0); + + return ret; +} + +static const char * +scsi_trace_rw12(struct trace_seq *p, unsigned char *cdb, int len) +{ + const char *ret = p->buffer + p->len; + sector_t lba = 0, txlen = 0; + + lba |= (cdb[2] << 24); + lba |= (cdb[3] << 16); + lba |= (cdb[4] << 8); + lba |= cdb[5]; + txlen |= (cdb[6] << 24); + txlen |= (cdb[7] << 16); + txlen |= (cdb[8] << 8); + txlen |= cdb[9]; + + trace_seq_printf(p, "lba=%llu txlen=%llu", + (unsigned long long)lba, (unsigned long long)txlen); + trace_seq_putc(p, 0); + + return ret; +} + +static const char * +scsi_trace_rw16(struct trace_seq *p, unsigned char *cdb, int len) +{ + const char *ret = p->buffer + p->len; + sector_t lba = 0, txlen = 0; + + lba |= ((u64)cdb[2] << 56); + lba |= ((u64)cdb[3] << 48); + lba |= ((u64)cdb[4] << 40); + lba |= ((u64)cdb[5] << 32); + lba |= (cdb[6] << 24); + lba |= (cdb[7] << 16); + lba |= (cdb[8] << 8); + lba |= cdb[9]; + txlen |= (cdb[10] << 24); + txlen |= (cdb[11] << 16); + txlen |= (cdb[12] << 8); + txlen |= cdb[13]; + + trace_seq_printf(p, "lba=%llu txlen=%llu", + (unsigned long long)lba, (unsigned long long)txlen); + trace_seq_putc(p, 0); + + return ret; +} + +static const char * +scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len) +{ + const char *ret = p->buffer + p->len; + sector_t lba = 0, txlen = 0; + + lba |= ((u64)cdb[12] << 56); + lba |= ((u64)cdb[13] << 48); + lba |= ((u64)cdb[14] << 40); + lba |= ((u64)cdb[15] << 32); + lba |= (cdb[16] << 24); + lba |= (cdb[17] << 16); + lba |= (cdb[18] << 8); + lba |= cdb[19]; + txlen |= (cdb[28] << 24); + txlen |= (cdb[29] << 16); + txlen |= (cdb[30] << 8); + txlen |= cdb[31]; + + trace_seq_printf(p, "%s_32 lba=%llu txlen=%llu", + (SERVICE_ACTION(cdb) == READ_32 ? "READ" : "WRITE"), + (unsigned long long)lba, (unsigned long long)txlen); + + trace_seq_putc(p, 0); + + return ret; +} + +static const char * +scsi_trace_varlen(struct trace_seq *p, unsigned char *cdb, int len) +{ + switch (SERVICE_ACTION(cdb)) { + case READ_32: + case WRITE_32: + return scsi_trace_rw32(p, cdb, len); + default: + return scsi_trace_misc(p, cdb, len); + } +} + +static const char * +scsi_trace_misc(struct trace_seq *p, unsigned char *cdb, int len) +{ + const char *ret = p->buffer + p->len; + + trace_seq_printf(p, "-"); + trace_seq_putc(p, 0); + + return ret; +} + +const char * +scsi_trace_parse_cdb(struct trace_seq *p, unsigned char *cdb, int len) +{ + switch (cdb[0]) { + case READ_6: + case WRITE_6: + return scsi_trace_rw6(p, cdb, len); + case READ_10: + case WRITE_10: + return scsi_trace_rw10(p, cdb, len); + case READ_12: + case WRITE_12: + return scsi_trace_rw12(p, cdb, len); + case READ_16: + case WRITE_16: + return scsi_trace_rw16(p, cdb, len); + case VARIABLE_LENGTH_CMD: + return scsi_trace_varlen(p, cdb, len); + default: + return scsi_trace_misc(p, cdb, len); + } +} diff --git a/include/trace/events/scsi.h b/include/trace/events/scsi.h new file mode 100644 index 000000000000..76cbf828eb86 --- /dev/null +++ b/include/trace/events/scsi.h @@ -0,0 +1,328 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM scsi + +#if !defined(_TRACE_SCSI_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_SCSI_H + +#include +#include +#include +#include + +#define scsi_opcode_name(opcode) { opcode, #opcode } +#define show_opcode_name(val) \ + __print_symbolic(val, \ + scsi_opcode_name(TEST_UNIT_READY), \ + scsi_opcode_name(REZERO_UNIT), \ + scsi_opcode_name(REQUEST_SENSE), \ + scsi_opcode_name(FORMAT_UNIT), \ + scsi_opcode_name(READ_BLOCK_LIMITS), \ + scsi_opcode_name(REASSIGN_BLOCKS), \ + scsi_opcode_name(INITIALIZE_ELEMENT_STATUS), \ + scsi_opcode_name(READ_6), \ + scsi_opcode_name(WRITE_6), \ + scsi_opcode_name(SEEK_6), \ + scsi_opcode_name(READ_REVERSE), \ + scsi_opcode_name(WRITE_FILEMARKS), \ + scsi_opcode_name(SPACE), \ + scsi_opcode_name(INQUIRY), \ + scsi_opcode_name(RECOVER_BUFFERED_DATA), \ + scsi_opcode_name(MODE_SELECT), \ + scsi_opcode_name(RESERVE), \ + scsi_opcode_name(RELEASE), \ + scsi_opcode_name(COPY), \ + scsi_opcode_name(ERASE), \ + scsi_opcode_name(MODE_SENSE), \ + scsi_opcode_name(START_STOP), \ + scsi_opcode_name(RECEIVE_DIAGNOSTIC), \ + scsi_opcode_name(SEND_DIAGNOSTIC), \ + scsi_opcode_name(ALLOW_MEDIUM_REMOVAL), \ + scsi_opcode_name(SET_WINDOW), \ + scsi_opcode_name(READ_CAPACITY), \ + scsi_opcode_name(READ_10), \ + scsi_opcode_name(WRITE_10), \ + scsi_opcode_name(SEEK_10), \ + scsi_opcode_name(POSITION_TO_ELEMENT), \ + scsi_opcode_name(WRITE_VERIFY), \ + scsi_opcode_name(VERIFY), \ + scsi_opcode_name(SEARCH_HIGH), \ + scsi_opcode_name(SEARCH_EQUAL), \ + scsi_opcode_name(SEARCH_LOW), \ + scsi_opcode_name(SET_LIMITS), \ + scsi_opcode_name(PRE_FETCH), \ + scsi_opcode_name(READ_POSITION), \ + scsi_opcode_name(SYNCHRONIZE_CACHE), \ + scsi_opcode_name(LOCK_UNLOCK_CACHE), \ + scsi_opcode_name(READ_DEFECT_DATA), \ + scsi_opcode_name(MEDIUM_SCAN), \ + scsi_opcode_name(COMPARE), \ + scsi_opcode_name(COPY_VERIFY), \ + scsi_opcode_name(WRITE_BUFFER), \ + scsi_opcode_name(READ_BUFFER), \ + scsi_opcode_name(UPDATE_BLOCK), \ + scsi_opcode_name(READ_LONG), \ + scsi_opcode_name(WRITE_LONG), \ + scsi_opcode_name(CHANGE_DEFINITION), \ + scsi_opcode_name(WRITE_SAME), \ + scsi_opcode_name(UNMAP), \ + scsi_opcode_name(READ_TOC), \ + scsi_opcode_name(LOG_SELECT), \ + scsi_opcode_name(LOG_SENSE), \ + scsi_opcode_name(XDWRITEREAD_10), \ + scsi_opcode_name(MODE_SELECT_10), \ + scsi_opcode_name(RESERVE_10), \ + scsi_opcode_name(RELEASE_10), \ + scsi_opcode_name(MODE_SENSE_10), \ + scsi_opcode_name(PERSISTENT_RESERVE_IN), \ + scsi_opcode_name(PERSISTENT_RESERVE_OUT), \ + scsi_opcode_name(VARIABLE_LENGTH_CMD), \ + scsi_opcode_name(REPORT_LUNS), \ + scsi_opcode_name(MAINTENANCE_IN), \ + scsi_opcode_name(MAINTENANCE_OUT), \ + scsi_opcode_name(MOVE_MEDIUM), \ + scsi_opcode_name(EXCHANGE_MEDIUM), \ + scsi_opcode_name(READ_12), \ + scsi_opcode_name(WRITE_12), \ + scsi_opcode_name(WRITE_VERIFY_12), \ + scsi_opcode_name(SEARCH_HIGH_12), \ + scsi_opcode_name(SEARCH_EQUAL_12), \ + scsi_opcode_name(SEARCH_LOW_12), \ + scsi_opcode_name(READ_ELEMENT_STATUS), \ + scsi_opcode_name(SEND_VOLUME_TAG), \ + scsi_opcode_name(WRITE_LONG_2), \ + scsi_opcode_name(READ_16), \ + scsi_opcode_name(WRITE_16), \ + scsi_opcode_name(VERIFY_16), \ + scsi_opcode_name(WRITE_SAME_16), \ + scsi_opcode_name(SERVICE_ACTION_IN), \ + scsi_opcode_name(SAI_READ_CAPACITY_16), \ + scsi_opcode_name(SAI_GET_LBA_STATUS), \ + scsi_opcode_name(MI_REPORT_TARGET_PGS), \ + scsi_opcode_name(MO_SET_TARGET_PGS), \ + scsi_opcode_name(READ_32), \ + scsi_opcode_name(WRITE_32), \ + scsi_opcode_name(WRITE_SAME_32), \ + scsi_opcode_name(ATA_16), \ + scsi_opcode_name(ATA_12)) + +#define scsi_hostbyte_name(result) { result, #result } +#define show_hostbyte_name(val) \ + __print_symbolic(val, \ + scsi_hostbyte_name(DID_OK), \ + scsi_hostbyte_name(DID_NO_CONNECT), \ + scsi_hostbyte_name(DID_BUS_BUSY), \ + scsi_hostbyte_name(DID_TIME_OUT), \ + scsi_hostbyte_name(DID_BAD_TARGET), \ + scsi_hostbyte_name(DID_ABORT), \ + scsi_hostbyte_name(DID_PARITY), \ + scsi_hostbyte_name(DID_ERROR), \ + scsi_hostbyte_name(DID_RESET), \ + scsi_hostbyte_name(DID_BAD_INTR), \ + scsi_hostbyte_name(DID_PASSTHROUGH), \ + scsi_hostbyte_name(DID_SOFT_ERROR), \ + scsi_hostbyte_name(DID_IMM_RETRY), \ + scsi_hostbyte_name(DID_REQUEUE), \ + scsi_hostbyte_name(DID_TRANSPORT_DISRUPTED), \ + scsi_hostbyte_name(DID_TRANSPORT_FAILFAST)) + +#define scsi_driverbyte_name(result) { result, #result } +#define show_driverbyte_name(val) \ + __print_symbolic(val, \ + scsi_driverbyte_name(DRIVER_OK), \ + scsi_driverbyte_name(DRIVER_BUSY), \ + scsi_driverbyte_name(DRIVER_SOFT), \ + scsi_driverbyte_name(DRIVER_MEDIA), \ + scsi_driverbyte_name(DRIVER_ERROR), \ + scsi_driverbyte_name(DRIVER_INVALID), \ + scsi_driverbyte_name(DRIVER_TIMEOUT), \ + scsi_driverbyte_name(DRIVER_HARD), \ + scsi_driverbyte_name(DRIVER_SENSE)) + +#define scsi_msgbyte_name(result) { result, #result } +#define show_msgbyte_name(val) \ + __print_symbolic(val, \ + scsi_msgbyte_name(COMMAND_COMPLETE), \ + scsi_msgbyte_name(EXTENDED_MESSAGE), \ + scsi_msgbyte_name(SAVE_POINTERS), \ + scsi_msgbyte_name(RESTORE_POINTERS), \ + scsi_msgbyte_name(DISCONNECT), \ + scsi_msgbyte_name(INITIATOR_ERROR), \ + scsi_msgbyte_name(ABORT_TASK_SET), \ + scsi_msgbyte_name(MESSAGE_REJECT), \ + scsi_msgbyte_name(NOP), \ + scsi_msgbyte_name(MSG_PARITY_ERROR), \ + scsi_msgbyte_name(LINKED_CMD_COMPLETE), \ + scsi_msgbyte_name(LINKED_FLG_CMD_COMPLETE), \ + scsi_msgbyte_name(TARGET_RESET), \ + scsi_msgbyte_name(ABORT_TASK), \ + scsi_msgbyte_name(CLEAR_TASK_SET), \ + scsi_msgbyte_name(INITIATE_RECOVERY), \ + scsi_msgbyte_name(RELEASE_RECOVERY), \ + scsi_msgbyte_name(CLEAR_ACA), \ + scsi_msgbyte_name(LOGICAL_UNIT_RESET), \ + scsi_msgbyte_name(SIMPLE_QUEUE_TAG), \ + scsi_msgbyte_name(HEAD_OF_QUEUE_TAG), \ + scsi_msgbyte_name(ORDERED_QUEUE_TAG), \ + scsi_msgbyte_name(IGNORE_WIDE_RESIDUE), \ + scsi_msgbyte_name(ACA), \ + scsi_msgbyte_name(QAS_REQUEST), \ + scsi_msgbyte_name(BUS_DEVICE_RESET), \ + scsi_msgbyte_name(ABORT)) + +#define scsi_statusbyte_name(result) { result, #result } +#define show_statusbyte_name(val) \ + __print_symbolic(val, \ + scsi_statusbyte_name(SAM_STAT_GOOD), \ + scsi_statusbyte_name(SAM_STAT_CHECK_CONDITION), \ + scsi_statusbyte_name(SAM_STAT_CONDITION_MET), \ + scsi_statusbyte_name(SAM_STAT_BUSY), \ + scsi_statusbyte_name(SAM_STAT_INTERMEDIATE), \ + scsi_statusbyte_name(SAM_STAT_INTERMEDIATE_CONDITION_MET), \ + scsi_statusbyte_name(SAM_STAT_RESERVATION_CONFLICT), \ + scsi_statusbyte_name(SAM_STAT_COMMAND_TERMINATED), \ + scsi_statusbyte_name(SAM_STAT_TASK_SET_FULL), \ + scsi_statusbyte_name(SAM_STAT_ACA_ACTIVE), \ + scsi_statusbyte_name(SAM_STAT_TASK_ABORTED)) + +const char *scsi_trace_parse_cdb(struct trace_seq*, unsigned char*, int); +#define __parse_cdb(cdb, len) scsi_trace_parse_cdb(p, cdb, len) + +TRACE_EVENT(scsi_dispatch_cmd_start, + + TP_PROTO(struct scsi_cmnd *cmd), + + TP_ARGS(cmd), + + TP_STRUCT__entry( + __field( unsigned int, host_no ) + __field( unsigned int, channel ) + __field( unsigned int, id ) + __field( unsigned int, lun ) + __field( unsigned int, opcode ) + __field( unsigned int, cmd_len ) + __dynamic_array(unsigned char, cmnd, cmd->cmd_len) + ), + + TP_fast_assign( + __entry->host_no = cmd->device->host->host_no; + __entry->channel = cmd->device->channel; + __entry->id = cmd->device->id; + __entry->lun = cmd->device->lun; + __entry->opcode = cmd->cmnd[0]; + __entry->cmd_len = cmd->cmd_len; + memcpy(__get_dynamic_array(cmnd), cmd->cmnd, cmd->cmd_len); + ), + + TP_printk("host_no=%u channel=%u id=%u lun=%u cmnd=(%s %s raw=%s)", + __entry->host_no, __entry->channel, __entry->id, + __entry->lun, show_opcode_name(__entry->opcode), + __parse_cdb(__get_dynamic_array(cmnd), __entry->cmd_len), + __print_hex(__get_dynamic_array(cmnd), __entry->cmd_len)) +); + +TRACE_EVENT(scsi_dispatch_cmd_error, + + TP_PROTO(struct scsi_cmnd *cmd, int rtn), + + TP_ARGS(cmd, rtn), + + TP_STRUCT__entry( + __field( unsigned int, host_no ) + __field( unsigned int, channel ) + __field( unsigned int, id ) + __field( unsigned int, lun ) + __field( int, rtn ) + __field( unsigned int, opcode ) + __field( unsigned int, cmd_len ) + __dynamic_array(unsigned char, cmnd, cmd->cmd_len) + ), + + TP_fast_assign( + __entry->host_no = cmd->device->host->host_no; + __entry->channel = cmd->device->channel; + __entry->id = cmd->device->id; + __entry->lun = cmd->device->lun; + __entry->rtn = rtn; + __entry->opcode = cmd->cmnd[0]; + __entry->cmd_len = cmd->cmd_len; + memcpy(__get_dynamic_array(cmnd), cmd->cmnd, cmd->cmd_len); + ), + + TP_printk("host_no=%u channel=%u id=%u lun=%u cmnd=(%s %s raw=%s)" + " rtn=%d", + __entry->host_no, __entry->channel, __entry->id, + __entry->lun, show_opcode_name(__entry->opcode), + __parse_cdb(__get_dynamic_array(cmnd), __entry->cmd_len), + __print_hex(__get_dynamic_array(cmnd), __entry->cmd_len), + __entry->rtn) +); + +DECLARE_EVENT_CLASS(scsi_cmd_done_timeout_template, + + TP_PROTO(struct scsi_cmnd *cmd), + + TP_ARGS(cmd), + + TP_STRUCT__entry( + __field( unsigned int, host_no ) + __field( unsigned int, channel ) + __field( unsigned int, id ) + __field( unsigned int, lun ) + __field( int, result ) + __field( unsigned int, opcode ) + __field( unsigned int, cmd_len ) + __dynamic_array(unsigned char, cmnd, cmd->cmd_len) + ), + + TP_fast_assign( + __entry->host_no = cmd->device->host->host_no; + __entry->channel = cmd->device->channel; + __entry->id = cmd->device->id; + __entry->lun = cmd->device->lun; + __entry->result = cmd->result; + __entry->opcode = cmd->cmnd[0]; + __entry->cmd_len = cmd->cmd_len; + memcpy(__get_dynamic_array(cmnd), cmd->cmnd, cmd->cmd_len); + ), + + TP_printk("host_no=%u channel=%u id=%u lun=%u cmnd=(%s %s raw=%s) " + "result=(driver=%s host=%s message=%s status=%s)", + __entry->host_no, __entry->channel, __entry->id, + __entry->lun, show_opcode_name(__entry->opcode), + __parse_cdb(__get_dynamic_array(cmnd), __entry->cmd_len), + __print_hex(__get_dynamic_array(cmnd), __entry->cmd_len), + show_driverbyte_name(((__entry->result) >> 24) & 0xff), + show_hostbyte_name(((__entry->result) >> 16) & 0xff), + show_msgbyte_name(((__entry->result) >> 8) & 0xff), + show_statusbyte_name(__entry->result & 0xff)) +); + +DEFINE_EVENT(scsi_cmd_done_timeout_template, scsi_dispatch_cmd_done, + TP_PROTO(struct scsi_cmnd *cmd), + TP_ARGS(cmd)); + +DEFINE_EVENT(scsi_cmd_done_timeout_template, scsi_dispatch_cmd_timeout, + TP_PROTO(struct scsi_cmnd *cmd), + TP_ARGS(cmd)); + +TRACE_EVENT(scsi_eh_wakeup, + + TP_PROTO(struct Scsi_Host *shost), + + TP_ARGS(shost), + + TP_STRUCT__entry( + __field( unsigned int, host_no ) + ), + + TP_fast_assign( + __entry->host_no = shost->host_no; + ), + + TP_printk("host_no=%u", __entry->host_no) +); + +#endif /* _TRACE_SCSI_H */ + +/* This part must be outside protection */ +#include diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index 7c4a0ca650b5..9cb5df5dc656 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -209,6 +209,7 @@ int trace_seq_putc(struct trace_seq *s, unsigned char c) return 1; } +EXPORT_SYMBOL(trace_seq_putc); int trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len) { -- cgit v1.2.2 From c446c1f9907e84d014edb0bf3501f30cb512e06a Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 23 Mar 2010 01:16:57 -0400 Subject: [SCSI] scsi_trace: Enhance SCSI command tracing Various SCSI trace enhancements: - Display data and protection information scatterlist lengths in the trace output - Add support for VERIFY and WRITE SAME commands and decode the UNMAP bit if applicable - Add decoding of the PROTECT field for READ/VERIFY/WRITE/WRITE SAME commands as well as the EXPECTED INITIAL REFERENCE TAG field for their 32-byte variants - Decode READ CAPACITY(16), GET LBA STATUS, and UNMAP Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/scsi_trace.c | 123 +++++++++++++++++++++++++++++++++++++++----- include/trace/events/scsi.h | 33 +++++++++--- 2 files changed, 136 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c index 9a3342a2fa36..b587289cfacb 100644 --- a/drivers/scsi/scsi_trace.c +++ b/drivers/scsi/scsi_trace.c @@ -19,7 +19,8 @@ #include #include -#define SERVICE_ACTION(cdb) ((cdb[8] << 8) | cdb[9]) +#define SERVICE_ACTION16(cdb) (cdb[1] & 0x1f) +#define SERVICE_ACTION32(cdb) ((cdb[8] << 8) | cdb[9]) static const char * scsi_trace_misc(struct trace_seq *, unsigned char *, int); @@ -55,8 +56,9 @@ scsi_trace_rw10(struct trace_seq *p, unsigned char *cdb, int len) txlen |= (cdb[7] << 8); txlen |= cdb[8]; - trace_seq_printf(p, "lba=%llu txlen=%llu", - (unsigned long long)lba, (unsigned long long)txlen); + trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u", + (unsigned long long)lba, (unsigned long long)txlen, + cdb[1] >> 5); trace_seq_putc(p, 0); return ret; @@ -77,8 +79,9 @@ scsi_trace_rw12(struct trace_seq *p, unsigned char *cdb, int len) txlen |= (cdb[8] << 8); txlen |= cdb[9]; - trace_seq_printf(p, "lba=%llu txlen=%llu", - (unsigned long long)lba, (unsigned long long)txlen); + trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u", + (unsigned long long)lba, (unsigned long long)txlen, + cdb[1] >> 5); trace_seq_putc(p, 0); return ret; @@ -103,8 +106,13 @@ scsi_trace_rw16(struct trace_seq *p, unsigned char *cdb, int len) txlen |= (cdb[12] << 8); txlen |= cdb[13]; - trace_seq_printf(p, "lba=%llu txlen=%llu", - (unsigned long long)lba, (unsigned long long)txlen); + trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u", + (unsigned long long)lba, (unsigned long long)txlen, + cdb[1] >> 5); + + if (cdb[0] == WRITE_SAME_16) + trace_seq_printf(p, " unmap=%u", cdb[1] >> 3 & 1); + trace_seq_putc(p, 0); return ret; @@ -113,8 +121,27 @@ scsi_trace_rw16(struct trace_seq *p, unsigned char *cdb, int len) static const char * scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len) { - const char *ret = p->buffer + p->len; + const char *ret = p->buffer + p->len, *cmd; sector_t lba = 0, txlen = 0; + u32 ei_lbrt = 0; + + switch (SERVICE_ACTION32(cdb)) { + case READ_32: + cmd = "READ"; + break; + case VERIFY_32: + cmd = "VERIFY"; + break; + case WRITE_32: + cmd = "WRITE"; + break; + case WRITE_SAME_32: + cmd = "WRITE_SAME"; + break; + default: + trace_seq_printf(p, "UNKNOWN"); + goto out; + } lba |= ((u64)cdb[12] << 56); lba |= ((u64)cdb[13] << 48); @@ -124,15 +151,76 @@ scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len) lba |= (cdb[17] << 16); lba |= (cdb[18] << 8); lba |= cdb[19]; + ei_lbrt |= (cdb[20] << 24); + ei_lbrt |= (cdb[21] << 16); + ei_lbrt |= (cdb[22] << 8); + ei_lbrt |= cdb[23]; txlen |= (cdb[28] << 24); txlen |= (cdb[29] << 16); txlen |= (cdb[30] << 8); txlen |= cdb[31]; - trace_seq_printf(p, "%s_32 lba=%llu txlen=%llu", - (SERVICE_ACTION(cdb) == READ_32 ? "READ" : "WRITE"), - (unsigned long long)lba, (unsigned long long)txlen); + trace_seq_printf(p, "%s_32 lba=%llu txlen=%llu protect=%u ei_lbrt=%u", + cmd, (unsigned long long)lba, + (unsigned long long)txlen, cdb[10] >> 5, ei_lbrt); + + if (SERVICE_ACTION32(cdb) == WRITE_SAME_32) + trace_seq_printf(p, " unmap=%u", cdb[10] >> 3 & 1); + +out: + trace_seq_putc(p, 0); + + return ret; +} + +static const char * +scsi_trace_unmap(struct trace_seq *p, unsigned char *cdb, int len) +{ + const char *ret = p->buffer + p->len; + unsigned int regions = cdb[7] << 8 | cdb[8]; + + trace_seq_printf(p, "regions=%u", (regions - 8) / 16); + trace_seq_putc(p, 0); + + return ret; +} + +static const char * +scsi_trace_service_action_in(struct trace_seq *p, unsigned char *cdb, int len) +{ + const char *ret = p->buffer + p->len, *cmd; + sector_t lba = 0; + u32 alloc_len = 0; + + switch (SERVICE_ACTION16(cdb)) { + case SAI_READ_CAPACITY_16: + cmd = "READ_CAPACITY_16"; + break; + case SAI_GET_LBA_STATUS: + cmd = "GET_LBA_STATUS"; + break; + default: + trace_seq_printf(p, "UNKNOWN"); + goto out; + } + + lba |= ((u64)cdb[2] << 56); + lba |= ((u64)cdb[3] << 48); + lba |= ((u64)cdb[4] << 40); + lba |= ((u64)cdb[5] << 32); + lba |= (cdb[6] << 24); + lba |= (cdb[7] << 16); + lba |= (cdb[8] << 8); + lba |= cdb[9]; + alloc_len |= (cdb[10] << 24); + alloc_len |= (cdb[11] << 16); + alloc_len |= (cdb[12] << 8); + alloc_len |= cdb[13]; + + trace_seq_printf(p, "%s lba=%llu alloc_len=%u", cmd, + (unsigned long long)lba, alloc_len); +out: trace_seq_putc(p, 0); return ret; @@ -141,9 +229,11 @@ scsi_trace_rw32(struct trace_seq *p, unsigned char *cdb, int len) static const char * scsi_trace_varlen(struct trace_seq *p, unsigned char *cdb, int len) { - switch (SERVICE_ACTION(cdb)) { + switch (SERVICE_ACTION32(cdb)) { case READ_32: + case VERIFY_32: case WRITE_32: + case WRITE_SAME_32: return scsi_trace_rw32(p, cdb, len); default: return scsi_trace_misc(p, cdb, len); @@ -169,14 +259,23 @@ scsi_trace_parse_cdb(struct trace_seq *p, unsigned char *cdb, int len) case WRITE_6: return scsi_trace_rw6(p, cdb, len); case READ_10: + case VERIFY: case WRITE_10: + case WRITE_SAME: return scsi_trace_rw10(p, cdb, len); case READ_12: + case VERIFY_12: case WRITE_12: return scsi_trace_rw12(p, cdb, len); case READ_16: + case VERIFY_16: case WRITE_16: + case WRITE_SAME_16: return scsi_trace_rw16(p, cdb, len); + case UNMAP: + return scsi_trace_unmap(p, cdb, len); + case SERVICE_ACTION_IN: + return scsi_trace_service_action_in(p, cdb, len); case VARIABLE_LENGTH_CMD: return scsi_trace_varlen(p, cdb, len); default: diff --git a/include/trace/events/scsi.h b/include/trace/events/scsi.h index 76cbf828eb86..25fbefdf2f2e 100644 --- a/include/trace/events/scsi.h +++ b/include/trace/events/scsi.h @@ -200,6 +200,8 @@ TRACE_EVENT(scsi_dispatch_cmd_start, __field( unsigned int, lun ) __field( unsigned int, opcode ) __field( unsigned int, cmd_len ) + __field( unsigned int, data_sglen ) + __field( unsigned int, prot_sglen ) __dynamic_array(unsigned char, cmnd, cmd->cmd_len) ), @@ -210,12 +212,16 @@ TRACE_EVENT(scsi_dispatch_cmd_start, __entry->lun = cmd->device->lun; __entry->opcode = cmd->cmnd[0]; __entry->cmd_len = cmd->cmd_len; + __entry->data_sglen = scsi_sg_count(cmd); + __entry->prot_sglen = scsi_prot_sg_count(cmd); memcpy(__get_dynamic_array(cmnd), cmd->cmnd, cmd->cmd_len); ), - TP_printk("host_no=%u channel=%u id=%u lun=%u cmnd=(%s %s raw=%s)", + TP_printk("host_no=%u channel=%u id=%u lun=%u data_sgl=%u prot_sgl=%u" \ + " cmnd=(%s %s raw=%s)", __entry->host_no, __entry->channel, __entry->id, - __entry->lun, show_opcode_name(__entry->opcode), + __entry->lun, __entry->data_sglen, __entry->prot_sglen, + show_opcode_name(__entry->opcode), __parse_cdb(__get_dynamic_array(cmnd), __entry->cmd_len), __print_hex(__get_dynamic_array(cmnd), __entry->cmd_len)) ); @@ -234,6 +240,8 @@ TRACE_EVENT(scsi_dispatch_cmd_error, __field( int, rtn ) __field( unsigned int, opcode ) __field( unsigned int, cmd_len ) + __field( unsigned int, data_sglen ) + __field( unsigned int, prot_sglen ) __dynamic_array(unsigned char, cmnd, cmd->cmd_len) ), @@ -245,13 +253,16 @@ TRACE_EVENT(scsi_dispatch_cmd_error, __entry->rtn = rtn; __entry->opcode = cmd->cmnd[0]; __entry->cmd_len = cmd->cmd_len; + __entry->data_sglen = scsi_sg_count(cmd); + __entry->prot_sglen = scsi_prot_sg_count(cmd); memcpy(__get_dynamic_array(cmnd), cmd->cmnd, cmd->cmd_len); ), - TP_printk("host_no=%u channel=%u id=%u lun=%u cmnd=(%s %s raw=%s)" - " rtn=%d", + TP_printk("host_no=%u channel=%u id=%u lun=%u data_sgl=%u prot_sgl=%u" \ + " cmnd=(%s %s raw=%s) rtn=%d", __entry->host_no, __entry->channel, __entry->id, - __entry->lun, show_opcode_name(__entry->opcode), + __entry->lun, __entry->data_sglen, __entry->prot_sglen, + show_opcode_name(__entry->opcode), __parse_cdb(__get_dynamic_array(cmnd), __entry->cmd_len), __print_hex(__get_dynamic_array(cmnd), __entry->cmd_len), __entry->rtn) @@ -271,6 +282,8 @@ DECLARE_EVENT_CLASS(scsi_cmd_done_timeout_template, __field( int, result ) __field( unsigned int, opcode ) __field( unsigned int, cmd_len ) + __field( unsigned int, data_sglen ) + __field( unsigned int, prot_sglen ) __dynamic_array(unsigned char, cmnd, cmd->cmd_len) ), @@ -282,13 +295,17 @@ DECLARE_EVENT_CLASS(scsi_cmd_done_timeout_template, __entry->result = cmd->result; __entry->opcode = cmd->cmnd[0]; __entry->cmd_len = cmd->cmd_len; + __entry->data_sglen = scsi_sg_count(cmd); + __entry->prot_sglen = scsi_prot_sg_count(cmd); memcpy(__get_dynamic_array(cmnd), cmd->cmnd, cmd->cmd_len); ), - TP_printk("host_no=%u channel=%u id=%u lun=%u cmnd=(%s %s raw=%s) " - "result=(driver=%s host=%s message=%s status=%s)", + TP_printk("host_no=%u channel=%u id=%u lun=%u data_sgl=%u " \ + "prot_sgl=%u cmnd=(%s %s raw=%s) result=(driver=%s host=%s " \ + "message=%s status=%s)", __entry->host_no, __entry->channel, __entry->id, - __entry->lun, show_opcode_name(__entry->opcode), + __entry->lun, __entry->data_sglen, __entry->prot_sglen, + show_opcode_name(__entry->opcode), __parse_cdb(__get_dynamic_array(cmnd), __entry->cmd_len), __print_hex(__get_dynamic_array(cmnd), __entry->cmd_len), show_driverbyte_name(((__entry->result) >> 24) & 0xff), -- cgit v1.2.2 From a9083016a5314b3aeba6e0d2e814872e72168c08 Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Mon, 12 Apr 2010 17:59:55 -0700 Subject: [SCSI] qla2xxx: Add ISP82XX support. Enhanced the driver to support new FCoE host bus adapter. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/Makefile | 3 +- drivers/scsi/qla2xxx/qla_attr.c | 35 +- drivers/scsi/qla2xxx/qla_dbg.c | 3 + drivers/scsi/qla2xxx/qla_def.h | 54 +- drivers/scsi/qla2xxx/qla_gbl.h | 85 + drivers/scsi/qla2xxx/qla_gs.c | 2 +- drivers/scsi/qla2xxx/qla_init.c | 233 ++- drivers/scsi/qla2xxx/qla_inline.h | 5 +- drivers/scsi/qla2xxx/qla_iocb.c | 74 +- drivers/scsi/qla2xxx/qla_isr.c | 42 +- drivers/scsi/qla2xxx/qla_mbx.c | 158 +- drivers/scsi/qla2xxx/qla_nx.c | 3635 +++++++++++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_nx.h | 888 +++++++++ drivers/scsi/qla2xxx/qla_os.c | 346 +++- drivers/scsi/qla2xxx/qla_sup.c | 80 +- 15 files changed, 5518 insertions(+), 125 deletions(-) create mode 100644 drivers/scsi/qla2xxx/qla_nx.c create mode 100644 drivers/scsi/qla2xxx/qla_nx.h diff --git a/drivers/scsi/qla2xxx/Makefile b/drivers/scsi/qla2xxx/Makefile index 1014db6f9928..5df782f4a097 100644 --- a/drivers/scsi/qla2xxx/Makefile +++ b/drivers/scsi/qla2xxx/Makefile @@ -1,4 +1,5 @@ qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \ - qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_dfs.o qla_bsg.o + qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_dfs.o qla_bsg.o \ + qla_nx.o obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx.o diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 0710e3c8760f..c272af4a76e4 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -41,6 +41,12 @@ qla2x00_sysfs_write_fw_dump(struct kobject *kobj, struct qla_hw_data *ha = vha->hw; int reading; + if (IS_QLA82XX(ha)) { + DEBUG2(qla_printk(KERN_INFO, ha, + "Firmware dump not supported for ISP82xx\n")); + return count; + } + if (off != 0) return (0); @@ -313,8 +319,8 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, else if (start == (ha->flt_region_boot * 4) || start == (ha->flt_region_fw * 4)) valid = 1; - else if (IS_QLA25XX(ha) || IS_QLA81XX(ha)) - valid = 1; + else if (IS_QLA25XX(ha) || IS_QLA8XXX_TYPE(ha)) + valid = 1; if (!valid) { qla_printk(KERN_WARNING, ha, "Invalid start region 0x%x/0x%x.\n", start, size); @@ -517,6 +523,7 @@ qla2x00_sysfs_write_reset(struct kobject *kobj, struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj, struct device, kobj))); struct qla_hw_data *ha = vha->hw; + struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); int type; if (off != 0) @@ -551,6 +558,20 @@ qla2x00_sysfs_write_reset(struct kobject *kobj, "MPI reset failed on (%ld).\n", vha->host_no); scsi_unblock_requests(vha->host); break; + case 0x2025e: + if (!IS_QLA82XX(ha) || vha != base_vha) { + qla_printk(KERN_INFO, ha, + "FCoE ctx reset not supported for host%ld.\n", + vha->host_no); + return count; + } + + qla_printk(KERN_INFO, ha, + "Issuing FCoE CTX reset on host%ld.\n", vha->host_no); + set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags); + qla2xxx_wake_dpc(vha); + qla2x00_wait_for_fcoe_ctx_reset(vha); + break; } return count; } @@ -836,7 +857,7 @@ qla2x00_alloc_sysfs_attr(scsi_qla_host_t *vha) continue; if (iter->is4GBp_only == 2 && !IS_QLA25XX(vha->hw)) continue; - if (iter->is4GBp_only == 3 && !IS_QLA81XX(vha->hw)) + if (iter->is4GBp_only == 3 && !(IS_QLA8XXX_TYPE(vha->hw))) continue; ret = sysfs_create_bin_file(&host->shost_gendev.kobj, @@ -860,7 +881,7 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t *vha) continue; if (iter->is4GBp_only == 2 && !IS_QLA25XX(ha)) continue; - if (iter->is4GBp_only == 3 && !IS_QLA81XX(ha)) + if (iter->is4GBp_only == 3 && !!(IS_QLA8XXX_TYPE(vha->hw))) continue; sysfs_remove_bin_file(&host->shost_gendev.kobj, @@ -1233,7 +1254,7 @@ qla2x00_vlan_id_show(struct device *dev, struct device_attribute *attr, { scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); - if (!IS_QLA81XX(vha->hw)) + if (!IS_QLA8XXX_TYPE(vha->hw)) return snprintf(buf, PAGE_SIZE, "\n"); return snprintf(buf, PAGE_SIZE, "%d\n", vha->fcoe_vlan_id); @@ -1245,7 +1266,7 @@ qla2x00_vn_port_mac_address_show(struct device *dev, { scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); - if (!IS_QLA81XX(vha->hw)) + if (!IS_QLA8XXX_TYPE(vha->hw)) return snprintf(buf, PAGE_SIZE, "\n"); return snprintf(buf, PAGE_SIZE, "%02x:%02x:%02x:%02x:%02x:%02x\n", @@ -1922,7 +1943,7 @@ qla2x00_init_host_attr(scsi_qla_host_t *vha) fc_host_max_npiv_vports(vha->host) = ha->max_npiv_vports; fc_host_npiv_vports_inuse(vha->host) = ha->cur_vport_count; - if (IS_QLA81XX(ha)) + if (IS_QLA8XXX_TYPE(ha)) speed = FC_PORTSPEED_10GBIT; else if (IS_QLA25XX(ha)) speed = FC_PORTSPEED_8GBIT | FC_PORTSPEED_4GBIT | diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index cb2eca4c26d8..89bfc119010b 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -769,6 +769,9 @@ qla24xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked) void *nxt; struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); + if (IS_QLA82XX(ha)) + return; + risc_address = ext_mem_cnt = 0; flags = 0; diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index c51bd4e5fb44..edb7a704ed77 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -34,6 +34,7 @@ #include #include "qla_bsg.h" +#include "qla_nx.h" #define QLA2XXX_DRIVER_NAME "qla2xxx" /* @@ -207,6 +208,7 @@ typedef struct srb { * SRB flag definitions */ #define SRB_DMA_VALID BIT_0 /* Command sent to ISP */ +#define SRB_FCP_CMND_DMA_VALID BIT_12 /* FCP command in IOCB */ /* * SRB extensions. @@ -417,6 +419,7 @@ typedef union { struct device_reg_2xxx isp; struct device_reg_24xx isp24; struct device_reg_25xxmq isp25mq; + struct device_reg_82xx isp82; } device_reg_t; #define ISP_REQ_Q_IN(ha, reg) \ @@ -2112,6 +2115,7 @@ struct isp_operations { int (*get_flash_version) (struct scsi_qla_host *, void *); int (*start_scsi) (srb_t *); + int (*abort_isp) (struct scsi_qla_host *); }; /* MSI-X Support *************************************************************/ @@ -2386,7 +2390,8 @@ struct qla_hw_data { #define DT_ISP2532 BIT_11 #define DT_ISP8432 BIT_12 #define DT_ISP8001 BIT_13 -#define DT_ISP_LAST (DT_ISP8001 << 1) +#define DT_ISP8021 BIT_14 +#define DT_ISP_LAST (DT_ISP8021 << 1) #define DT_IIDMA BIT_26 #define DT_FWI2 BIT_27 @@ -2409,6 +2414,7 @@ struct qla_hw_data { #define IS_QLA2532(ha) (DT_MASK(ha) & DT_ISP2532) #define IS_QLA8432(ha) (DT_MASK(ha) & DT_ISP8432) #define IS_QLA8001(ha) (DT_MASK(ha) & DT_ISP8001) +#define IS_QLA82XX(ha) (DT_MASK(ha) & DT_ISP8021) #define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \ IS_QLA6312(ha) || IS_QLA6322(ha)) @@ -2419,8 +2425,10 @@ struct qla_hw_data { #define IS_QLA24XX_TYPE(ha) (IS_QLA24XX(ha) || IS_QLA54XX(ha) || \ IS_QLA84XX(ha)) #define IS_QLA81XX(ha) (IS_QLA8001(ha)) +#define IS_QLA8XXX_TYPE(ha) (IS_QLA81XX(ha) || IS_QLA82XX(ha)) #define IS_QLA2XXX_MIDTYPE(ha) (IS_QLA24XX(ha) || IS_QLA84XX(ha) || \ - IS_QLA25XX(ha) || IS_QLA81XX(ha)) + IS_QLA25XX(ha) || IS_QLA81XX(ha) || \ + IS_QLA82XX(ha)) #define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha)) #define IS_NOPOLLING_TYPE(ha) ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && \ (ha)->flags.msix_enabled) @@ -2603,6 +2611,7 @@ struct qla_hw_data { uint32_t flt_region_npiv_conf; uint32_t flt_region_gold_fw; uint32_t flt_region_fcp_prio; + uint32_t flt_region_bootload; /* Needed for BEACON */ uint16_t beacon_blink_led; @@ -2634,6 +2643,38 @@ struct qla_hw_data { /* FCP_CMND priority support */ struct qla_fcp_prio_cfg *fcp_prio_cfg; + + struct dma_pool *dl_dma_pool; +#define DSD_LIST_DMA_POOL_SIZE 512 + + struct dma_pool *fcp_cmnd_dma_pool; + mempool_t *ctx_mempool; +#define FCP_CMND_DMA_POOL_SIZE 512 + + unsigned long nx_pcibase; /* Base I/O address */ + uint8_t *nxdb_rd_ptr; /* Doorbell read pointer */ + unsigned long nxdb_wr_ptr; /* Door bell write pointer */ + unsigned long first_page_group_start; + unsigned long first_page_group_end; + + uint32_t crb_win; + uint32_t curr_window; + uint32_t ddr_mn_window; + unsigned long mn_win_crb; + unsigned long ms_win_crb; + int qdr_sn_window; + uint32_t nx_dev_init_timeout; + uint32_t nx_reset_timeout; + rwlock_t hw_lock; + uint16_t portnum; /* port number */ + int link_width; + struct fw_blob *hablob; + struct qla82xx_legacy_intr_set nx_legacy_intr; + + uint16_t gbl_dsd_inuse; + uint16_t gbl_dsd_avail; + struct list_head gbl_dsd_list; +#define NUM_DSD_CHAIN 4096 }; /* @@ -2686,10 +2727,13 @@ typedef struct scsi_qla_host { #define VP_DPC_NEEDED 14 /* wake up for VP dpc handling */ #define UNLOADING 15 #define NPIV_CONFIG_NEEDED 16 +#define ISP_UNRECOVERABLE 17 +#define FCOE_CTX_RESET_NEEDED 18 /* Initiate FCoE context reset */ uint32_t device_flags; #define SWITCH_FOUND BIT_0 #define DFLG_NO_CABLE BIT_1 +#define DFLG_DEV_FAILED BIT_5 /* ISP configuration data. */ uint16_t loop_id; /* Host adapter loop id */ @@ -2747,6 +2791,8 @@ typedef struct scsi_qla_host { #define VP_ERR_ADAP_NORESOURCES 5 struct qla_hw_data *hw; struct req_que *req; + int fw_heartbeat_counter; + int seconds_since_last_heartbeat; } scsi_qla_host_t; /* @@ -2799,6 +2845,10 @@ typedef struct scsi_qla_host { #define OPTROM_SIZE_24XX 0x100000 #define OPTROM_SIZE_25XX 0x200000 #define OPTROM_SIZE_81XX 0x400000 +#define OPTROM_SIZE_82XX 0x800000 + +#define OPTROM_BURST_SIZE 0x1000 +#define OPTROM_BURST_DWORDS (OPTROM_BURST_SIZE / 4) #include "qla_gbl.h" #include "qla_dbg.h" diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 5efd4c05c79b..cff5a4ae7626 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -44,6 +44,7 @@ extern int qla2x00_local_device_login(scsi_qla_host_t *, fc_port_t *); extern void qla2x00_update_fcports(scsi_qla_host_t *); extern int qla2x00_abort_isp(scsi_qla_host_t *); +extern void qla2x00_abort_isp_cleanup(scsi_qla_host_t *); extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *); @@ -79,6 +80,9 @@ extern int ql2xmaxqueues; extern int ql2xmultique_tag; extern int ql2xfwloadbin; extern int ql2xetsenable; +extern int ql2xshiftctondsd; +extern int ql2xdbwr; +extern int ql2xdontresethba; extern int qla2x00_loop_reset(scsi_qla_host_t *); extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int); @@ -135,6 +139,7 @@ extern struct fw_blob *qla2x00_request_firmware(scsi_qla_host_t *); extern int qla2x00_wait_for_hba_online(scsi_qla_host_t *); extern int qla2x00_wait_for_chip_reset(scsi_qla_host_t *); +extern int qla2x00_wait_for_fcoe_ctx_reset(scsi_qla_host_t *); extern void qla2xxx_wake_dpc(struct scsi_qla_host *); extern void qla2x00_alert_all_vps(struct rsp_que *, uint16_t *); @@ -157,6 +162,9 @@ int __qla2x00_marker(struct scsi_qla_host *, struct req_que *, struct rsp_que *, uint16_t, uint16_t, uint8_t); extern int qla2x00_start_sp(srb_t *); extern void qla2x00_ctx_sp_free(srb_t *); +extern uint16_t qla24xx_calc_iocbs(uint16_t); +extern void qla24xx_build_scsi_iocbs(srb_t *, struct cmd_type_7 *, uint16_t); + /* * Global Function Prototypes in qla_mbx.c source file. @@ -343,6 +351,7 @@ qla24xx_process_response_queue(struct scsi_qla_host *, struct rsp_que *); extern int qla2x00_request_irqs(struct qla_hw_data *, struct rsp_que *); extern void qla2x00_free_irqs(scsi_qla_host_t *); +extern int qla2x00_get_data_rate(scsi_qla_host_t *); /* * Global Function Prototypes in qla_sup.c source file. */ @@ -466,6 +475,82 @@ extern void qla25xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t); extern void qla25xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t); extern void qla24xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t); +/* qla82xx related functions */ + +/* PCI related functions */ +extern int qla82xx_pci_config(struct scsi_qla_host *); +extern int qla82xx_pci_mem_read_2M(struct qla_hw_data *, u64, void *, int); +extern int qla82xx_pci_mem_write_2M(struct qla_hw_data *, u64, void *, int); +extern char *qla82xx_pci_info_str(struct scsi_qla_host *, char *); +extern int qla82xx_pci_region_offset(struct pci_dev *, int); +extern int qla82xx_pci_region_len(struct pci_dev *, int); +extern int qla82xx_iospace_config(struct qla_hw_data *); + +/* Initialization related functions */ +extern void qla82xx_reset_chip(struct scsi_qla_host *); +extern void qla82xx_config_rings(struct scsi_qla_host *); +extern int qla82xx_nvram_config(struct scsi_qla_host *); +extern int qla82xx_pinit_from_rom(scsi_qla_host_t *); +extern int qla82xx_load_firmware(scsi_qla_host_t *); +extern int qla82xx_reset_hw(scsi_qla_host_t *); +extern int qla82xx_load_risc_blob(scsi_qla_host_t *, uint32_t *); +extern void qla82xx_watchdog(scsi_qla_host_t *); + +/* Firmware and flash related functions */ +extern int qla82xx_load_risc(scsi_qla_host_t *, uint32_t *); +extern uint8_t *qla82xx_read_optrom_data(struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); +extern int qla82xx_write_optrom_data(struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); + +/* Mailbox related functions */ +extern int qla82xx_abort_isp(scsi_qla_host_t *); +extern int qla82xx_restart_isp(scsi_qla_host_t *); + +/* IOCB related functions */ +extern int qla82xx_start_scsi(srb_t *); + +/* Interrupt related */ +extern irqreturn_t qla82xx_intr_handler(int, void *); +extern irqreturn_t qla82xx_msi_handler(int, void *); +extern irqreturn_t qla82xx_msix_default(int, void *); +extern irqreturn_t qla82xx_msix_rsp_q(int, void *); +extern void qla82xx_enable_intrs(struct qla_hw_data *); +extern void qla82xx_disable_intrs(struct qla_hw_data *); +extern void qla82xx_mbx_completion(scsi_qla_host_t *, uint16_t); +extern void qla82xx_poll(int, void *); +extern void qla82xx_init_flags(struct qla_hw_data *); + +/* ISP 8021 hardware related */ +extern int qla82xx_crb_win_lock(struct qla_hw_data *); +extern void qla82xx_crb_win_unlock(struct qla_hw_data *); +extern int qla82xx_pci_get_crb_addr_2M(struct qla_hw_data *, ulong *); +extern int qla82xx_wr_32(struct qla_hw_data *, ulong, u32); +extern int qla82xx_rd_32(struct qla_hw_data *, ulong); +extern int qla82xx_rdmem(struct qla_hw_data *, u64, void *, int); +extern int qla82xx_wrmem(struct qla_hw_data *, u64, void *, int); +extern int qla82xx_check_for_bad_spd(struct qla_hw_data *); +extern int qla82xx_load_fw(scsi_qla_host_t *); +extern int qla82xx_rom_lock(struct qla_hw_data *); +extern void qla82xx_rom_unlock(struct qla_hw_data *); +extern int qla82xx_rom_fast_read(struct qla_hw_data *, int , int *); +extern int qla82xx_do_rom_fast_read(struct qla_hw_data *, int, int *); +extern unsigned long qla82xx_decode_crb_addr(unsigned long); + +/* ISP 8021 IDC */ +extern void qla82xx_clear_drv_active(struct qla_hw_data *); +extern int qla82xx_idc_lock(struct qla_hw_data *); +extern void qla82xx_idc_unlock(struct qla_hw_data *); +extern int qla82xx_device_state_handler(scsi_qla_host_t *); + +extern void qla2x00_set_model_info(scsi_qla_host_t *, uint8_t *, + size_t, char *); +extern int qla82xx_mbx_intr_enable(scsi_qla_host_t *); +extern int qla82xx_mbx_intr_disable(scsi_qla_host_t *); +extern void qla82xx_start_iocbs(srb_t *); +extern int qla82xx_fcoe_ctx_reset(scsi_qla_host_t *); +extern void qla82xx_wait_for_pending_commands(scsi_qla_host_t *); + /* BSG related functions */ extern int qla24xx_bsg_request(struct fc_bsg_job *); extern int qla24xx_bsg_timeout(struct fc_bsg_job *); diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 4647015eba63..872c55f049a5 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -1535,7 +1535,7 @@ qla2x00_fdmi_rpa(scsi_qla_host_t *vha) eiter = (struct ct_fdmi_port_attr *) (entries + size); eiter->type = __constant_cpu_to_be16(FDMI_PORT_SUPPORT_SPEED); eiter->len = __constant_cpu_to_be16(4 + 4); - if (IS_QLA81XX(ha)) + if (IS_QLA8XXX_TYPE(ha)) eiter->a.sup_speed = __constant_cpu_to_be32( FDMI_PORT_SPEED_10GB); else if (IS_QLA25XX(ha)) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 8517aa49744a..55540d2d4e38 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -328,6 +328,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) if (rval) return (rval); } + if (IS_QLA84XX(ha)) { ha->cs84xx = qla84xx_get_chip(vha); if (!ha->cs84xx) { @@ -961,6 +962,9 @@ qla24xx_chip_diag(scsi_qla_host_t *vha) struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; + if (IS_QLA82XX(ha)) + return QLA_SUCCESS; + ha->fw_transfer_size = REQUEST_ENTRY_SIZE * req->length; rval = qla2x00_mbx_reg_test(vha); @@ -1183,6 +1187,12 @@ qla2x00_setup_chip(scsi_qla_host_t *vha) unsigned long flags; uint16_t fw_major_version; + if (IS_QLA82XX(ha)) { + rval = ha->isp_ops->load_risc(vha, &srisc_address); + if (rval == QLA_SUCCESS) + goto enable_82xx_npiv; + } + if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) { /* Disable SRAM, Instruction RAM and GP RAM parity. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -1208,6 +1218,7 @@ qla2x00_setup_chip(scsi_qla_host_t *vha) rval = qla2x00_execute_fw(vha, srisc_address); /* Retrieve firmware information. */ if (rval == QLA_SUCCESS) { +enable_82xx_npiv: fw_major_version = ha->fw_major_version; rval = qla2x00_get_fw_version(vha, &ha->fw_major_version, @@ -1232,8 +1243,10 @@ qla2x00_setup_chip(scsi_qla_host_t *vha) &ha->fw_xcb_count, NULL, NULL, &ha->max_npiv_vports, NULL); - if (!fw_major_version && ql2xallocfwdump) - qla2x00_alloc_fw_dump(vha); + if (!fw_major_version && ql2xallocfwdump) { + if (!IS_QLA82XX(ha)) + qla2x00_alloc_fw_dump(vha); + } } } else { DEBUG2(printk(KERN_INFO @@ -1390,6 +1403,9 @@ qla24xx_update_fw_options(scsi_qla_host_t *vha) int rval; struct qla_hw_data *ha = vha->hw; + if (IS_QLA82XX(ha)) + return; + /* Update Serial Link options. */ if ((le16_to_cpu(ha->fw_seriallink_options24[0]) & BIT_0) == 0) return; @@ -1824,7 +1840,7 @@ qla2x00_configure_hba(scsi_qla_host_t *vha) return(rval); } -static inline void +inline void qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len, char *def) { @@ -1832,7 +1848,7 @@ qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len, uint16_t index; struct qla_hw_data *ha = vha->hw; int use_tbl = !IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && - !IS_QLA81XX(ha); + !IS_QLA8XXX_TYPE(ha); if (memcmp(model, BINZERO, len) != 0) { strncpy(ha->model_number, model, len); @@ -3552,6 +3568,45 @@ qla2x00_update_fcports(scsi_qla_host_t *base_vha) qla2x00_rport_del(fcport); } +void +qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha) +{ + struct qla_hw_data *ha = vha->hw; + struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev); + struct scsi_qla_host *tvp; + + vha->flags.online = 0; + ha->flags.chip_reset_done = 0; + clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); + ha->qla_stats.total_isp_aborts++; + + qla_printk(KERN_INFO, ha, + "Performing ISP error recovery - ha= %p.\n", ha); + + /* Chip reset does not apply to 82XX */ + if (!IS_QLA82XX(ha)) + ha->isp_ops->reset_chip(vha); + + atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); + if (atomic_read(&vha->loop_state) != LOOP_DOWN) { + atomic_set(&vha->loop_state, LOOP_DOWN); + qla2x00_mark_all_devices_lost(vha, 0); + list_for_each_entry_safe(vp, tvp, &base_vha->hw->vp_list, list) + qla2x00_mark_all_devices_lost(vp, 0); + } else { + if (!atomic_read(&vha->loop_down_timer)) + atomic_set(&vha->loop_down_timer, + LOOP_DOWN_TIME); + } + + /* Make sure for ISP 82XX IO DMA is complete */ + if (IS_QLA82XX(ha)) + qla82xx_wait_for_pending_commands(vha); + + /* Requeue all commands in outstanding command list. */ + qla2x00_abort_all_cmds(vha, DID_RESET << 16); +} + /* * qla2x00_abort_isp * Resets ISP and aborts all outstanding commands. @@ -3573,27 +3628,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) struct req_que *req = ha->req_q_map[0]; if (vha->flags.online) { - vha->flags.online = 0; - ha->flags.chip_reset_done = 0; - clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); - ha->qla_stats.total_isp_aborts++; - - qla_printk(KERN_INFO, ha, - "Performing ISP error recovery - ha= %p.\n", ha); - ha->isp_ops->reset_chip(vha); - - atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); - if (atomic_read(&vha->loop_state) != LOOP_DOWN) { - atomic_set(&vha->loop_state, LOOP_DOWN); - qla2x00_mark_all_devices_lost(vha, 0); - } else { - if (!atomic_read(&vha->loop_down_timer)) - atomic_set(&vha->loop_down_timer, - LOOP_DOWN_TIME); - } - - /* Requeue all commands in outstanding command list. */ - qla2x00_abort_all_cmds(vha, DID_RESET << 16); + qla2x00_abort_isp_cleanup(vha); if (unlikely(pci_channel_offline(ha->pdev) && ha->flags.pci_channel_io_perm_failure)) { @@ -3849,6 +3884,9 @@ qla24xx_reset_adapter(scsi_qla_host_t *vha) struct qla_hw_data *ha = vha->hw; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + if (IS_QLA82XX(ha)) + return; + vha->flags.online = 0; ha->isp_ops->disable_intrs(ha); @@ -3912,6 +3950,8 @@ qla24xx_nvram_config(scsi_qla_host_t *vha) } ha->nvram_size = sizeof(struct nvram_24xx); ha->vpd_size = FA_NVRAM_VPD_SIZE; + if (IS_QLA82XX(ha)) + ha->vpd_size = FA_VPD_SIZE_82XX; /* Get VPD data into cache */ ha->vpd = ha->nvram + VPD_OFFSET; @@ -4775,7 +4815,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha) * Setup driver NVRAM options. */ qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name), - "QLE81XX"); + "QLE8XXX"); /* Use alternate WWN? */ if (nv->host_p & __constant_cpu_to_le32(BIT_15)) { @@ -4898,6 +4938,147 @@ qla81xx_nvram_config(scsi_qla_host_t *vha) return (rval); } +int +qla82xx_restart_isp(scsi_qla_host_t *vha) +{ + int status, rval; + uint32_t wait_time; + struct qla_hw_data *ha = vha->hw; + struct req_que *req = ha->req_q_map[0]; + struct rsp_que *rsp = ha->rsp_q_map[0]; + struct scsi_qla_host *vp; + struct scsi_qla_host *tvp; + + status = qla2x00_init_rings(vha); + if (!status) { + clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); + ha->flags.chip_reset_done = 1; + + status = qla2x00_fw_ready(vha); + if (!status) { + qla_printk(KERN_INFO, ha, + "%s(): Start configure loop, " + "status = %d\n", __func__, status); + + /* Issue a marker after FW becomes ready. */ + qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL); + + vha->flags.online = 1; + /* Wait at most MAX_TARGET RSCNs for a stable link. */ + wait_time = 256; + do { + clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); + qla2x00_configure_loop(vha); + wait_time--; + } while (!atomic_read(&vha->loop_down_timer) && + !(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) && + wait_time && + (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))); + } + + /* if no cable then assume it's good */ + if ((vha->device_flags & DFLG_NO_CABLE)) + status = 0; + + qla_printk(KERN_INFO, ha, + "%s(): Configure loop done, status = 0x%x\n", + __func__, status); + } + + if (!status) { + clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); + + if (!atomic_read(&vha->loop_down_timer)) { + /* + * Issue marker command only when we are going + * to start the I/O . + */ + vha->marker_needed = 1; + } + + vha->flags.online = 1; + + ha->isp_ops->enable_intrs(ha); + + ha->isp_abort_cnt = 0; + clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); + + if (ha->fce) { + ha->flags.fce_enabled = 1; + memset(ha->fce, 0, + fce_calc_size(ha->fce_bufs)); + rval = qla2x00_enable_fce_trace(vha, + ha->fce_dma, ha->fce_bufs, ha->fce_mb, + &ha->fce_bufs); + if (rval) { + qla_printk(KERN_WARNING, ha, + "Unable to reinitialize FCE " + "(%d).\n", rval); + ha->flags.fce_enabled = 0; + } + } + + if (ha->eft) { + memset(ha->eft, 0, EFT_SIZE); + rval = qla2x00_enable_eft_trace(vha, + ha->eft_dma, EFT_NUM_BUFFERS); + if (rval) { + qla_printk(KERN_WARNING, ha, + "Unable to reinitialize EFT " + "(%d).\n", rval); + } + } + } else { /* failed the ISP abort */ + vha->flags.online = 1; + if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { + if (ha->isp_abort_cnt == 0) { + qla_printk(KERN_WARNING, ha, + "ISP error recovery failed - " + "board disabled\n"); + /* + * The next call disables the board + * completely. + */ + ha->isp_ops->reset_adapter(vha); + vha->flags.online = 0; + clear_bit(ISP_ABORT_RETRY, + &vha->dpc_flags); + status = 0; + } else { /* schedule another ISP abort */ + ha->isp_abort_cnt--; + qla_printk(KERN_INFO, ha, + "qla%ld: ISP abort - " + "retry remaining %d\n", + vha->host_no, ha->isp_abort_cnt); + status = 1; + } + } else { + ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT; + qla_printk(KERN_INFO, ha, + "(%ld): ISP error recovery " + "- retrying (%d) more times\n", + vha->host_no, ha->isp_abort_cnt); + set_bit(ISP_ABORT_RETRY, &vha->dpc_flags); + status = 1; + } + } + + if (!status) { + DEBUG(printk(KERN_INFO + "qla82xx_restart_isp(%ld): succeeded.\n", + vha->host_no)); + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { + if (vp->vp_idx) + qla2x00_vp_abort_isp(vp); + } + } else { + qla_printk(KERN_INFO, ha, + "qla82xx_restart_isp: **** FAILED ****\n"); + } + + return status; +} + void qla81xx_update_fw_options(scsi_qla_host_t *vha) { diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index 5e0a7095c9f2..ad53c6455556 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -37,7 +37,10 @@ qla2x00_poll(struct rsp_que *rsp) unsigned long flags; struct qla_hw_data *ha = rsp->hw; local_irq_save(flags); - ha->isp_ops->intr_handler(0, rsp); + if (IS_QLA82XX(ha)) + qla82xx_poll(0, rsp); + else + ha->isp_ops->intr_handler(0, rsp); local_irq_restore(flags); } diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 8299a9891bfe..d792ae32ed69 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -506,7 +506,10 @@ qla2x00_req_pkt(struct scsi_qla_host *vha, struct req_que *req, cnt = (uint16_t) RD_REG_DWORD(®->isp25mq.req_q_out); else { - if (IS_FWI2_CAPABLE(ha)) + if (IS_QLA82XX(ha)) + cnt = (uint16_t)RD_REG_DWORD( + ®->isp82.req_q_out); + else if (IS_FWI2_CAPABLE(ha)) cnt = (uint16_t)RD_REG_DWORD( ®->isp24.req_q_out); else @@ -579,11 +582,29 @@ qla2x00_isp_cmd(struct scsi_qla_host *vha, struct req_que *req) req->ring_ptr++; /* Set chip new ring index. */ - if (ha->mqenable) { + if (IS_QLA82XX(ha)) { + uint32_t dbval = 0x04 | (ha->portnum << 5); + + /* write, read and verify logic */ + dbval = dbval | (req->id << 8) | (req->ring_index << 16); + if (ql2xdbwr) + qla82xx_wr_32(ha, ha->nxdb_wr_ptr, dbval); + else { + WRT_REG_DWORD( + (unsigned long __iomem *)ha->nxdb_wr_ptr, + dbval); + wmb(); + while (RD_REG_DWORD(ha->nxdb_rd_ptr) != dbval) { + WRT_REG_DWORD((unsigned long __iomem *) + ha->nxdb_wr_ptr, dbval); + wmb(); + } + } + } else if (ha->mqenable) { + /* Set chip new ring index. */ WRT_REG_DWORD(®->isp25mq.req_q_in, req->ring_index); RD_REG_DWORD(&ioreg->hccr); - } - else { + } else { if (IS_FWI2_CAPABLE(ha)) { WRT_REG_DWORD(®->isp24.req_q_in, req->ring_index); RD_REG_DWORD_RELAXED(®->isp24.req_q_in); @@ -604,7 +625,7 @@ qla2x00_isp_cmd(struct scsi_qla_host *vha, struct req_que *req) * * Returns the number of IOCB entries needed to store @dsds. */ -static inline uint16_t +inline uint16_t qla24xx_calc_iocbs(uint16_t dsds) { uint16_t iocbs; @@ -626,7 +647,7 @@ qla24xx_calc_iocbs(uint16_t dsds) * @cmd_pkt: Command type 3 IOCB * @tot_dsds: Total number of segments to transfer */ -static inline void +inline void qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt, uint16_t tot_dsds) { @@ -931,24 +952,31 @@ qla2x00_start_iocbs(srb_t *sp) device_reg_t __iomem *reg = ISP_QUE_REG(ha, req->id); struct device_reg_2xxx __iomem *ioreg = &ha->iobase->isp; - /* Adjust ring index. */ - req->ring_index++; - if (req->ring_index == req->length) { - req->ring_index = 0; - req->ring_ptr = req->ring; - } else - req->ring_ptr++; - - /* Set chip new ring index. */ - if (ha->mqenable) { - WRT_REG_DWORD(®->isp25mq.req_q_in, req->ring_index); - RD_REG_DWORD(&ioreg->hccr); - } else if (IS_FWI2_CAPABLE(ha)) { - WRT_REG_DWORD(®->isp24.req_q_in, req->ring_index); - RD_REG_DWORD_RELAXED(®->isp24.req_q_in); + if (IS_QLA82XX(ha)) { + qla82xx_start_iocbs(sp); } else { - WRT_REG_WORD(ISP_REQ_Q_IN(ha, ®->isp), req->ring_index); - RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, ®->isp)); + /* Adjust ring index. */ + req->ring_index++; + if (req->ring_index == req->length) { + req->ring_index = 0; + req->ring_ptr = req->ring; + } else + req->ring_ptr++; + + /* Set chip new ring index. */ + if (ha->mqenable) { + WRT_REG_DWORD(®->isp25mq.req_q_in, req->ring_index); + RD_REG_DWORD(&ioreg->hccr); + } else if (IS_QLA82XX(ha)) { + qla82xx_start_iocbs(sp); + } else if (IS_FWI2_CAPABLE(ha)) { + WRT_REG_DWORD(®->isp24.req_q_in, req->ring_index); + RD_REG_DWORD_RELAXED(®->isp24.req_q_in); + } else { + WRT_REG_WORD(ISP_REQ_Q_IN(ha, ®->isp), + req->ring_index); + RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, ®->isp)); + } } } diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index db539b0c3dae..f1ac62d505d1 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -326,7 +326,7 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb) /* Setup to process RIO completion. */ handle_cnt = 0; - if (IS_QLA81XX(ha)) + if (IS_QLA8XXX_TYPE(ha)) goto skip_rio; switch (mb[0]) { case MBA_SCSI_COMPLETION: @@ -544,7 +544,7 @@ skip_rio: if (IS_QLA2100(ha)) break; - if (IS_QLA81XX(ha)) + if (IS_QLA8XXX_TYPE(ha)) DEBUG2(printk("scsi(%ld): DCBX Completed -- %04x %04x " "%04x\n", vha->host_no, mb[1], mb[2], mb[3])); else @@ -845,7 +845,7 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha, qla2x00_sp_compl(ha, sp); } else { DEBUG2(printk("scsi(%ld) Req:%d: Invalid ISP SCSI completion" - " handle(%d)\n", vha->host_no, req->id, index)); + " handle(0x%x)\n", vha->host_no, req->id, index)); qla_printk(KERN_WARNING, ha, "Invalid ISP SCSI completion handle\n"); @@ -1337,6 +1337,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) handle = (uint32_t) LSW(sts->handle); que = MSW(sts->handle); req = ha->req_q_map[que]; + /* Fast path completion. */ if (comp_status == CS_COMPLETE && scsi_status == 0) { qla2x00_process_completed_request(vha, req, handle); @@ -1806,6 +1807,7 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha, struct rsp_que *rsp) { struct sts_entry_24xx *pkt; + struct qla_hw_data *ha = vha->hw; if (!vha->flags.online) return; @@ -1866,7 +1868,11 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha, } /* Adjust ring index */ - WRT_REG_DWORD(rsp->rsp_q_out, rsp->ring_index); + if (IS_QLA82XX(ha)) { + struct device_reg_82xx __iomem *reg = &ha->iobase->isp82; + WRT_REG_DWORD(®->rsp_q_out[0], rsp->ring_index); + } else + WRT_REG_DWORD(rsp->rsp_q_out, rsp->ring_index); } static void @@ -2169,6 +2175,11 @@ static struct qla_init_msix_entry msix_entries[3] = { { "qla2xxx (multiq)", qla25xx_msix_rsp_q }, }; +static struct qla_init_msix_entry qla82xx_msix_entries[2] = { + { "qla2xxx (default)", qla82xx_msix_default }, + { "qla2xxx (rsp_q)", qla82xx_msix_rsp_q }, +}; + static void qla24xx_disable_msix(struct qla_hw_data *ha) { @@ -2195,7 +2206,7 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) struct qla_msix_entry *qentry; entries = kzalloc(sizeof(struct msix_entry) * ha->msix_count, - GFP_KERNEL); + GFP_KERNEL); if (!entries) return -ENOMEM; @@ -2240,8 +2251,15 @@ msix_failed: /* Enable MSI-X vectors for the base queue */ for (i = 0; i < 2; i++) { qentry = &ha->msix_entries[i]; - ret = request_irq(qentry->vector, msix_entries[i].handler, - 0, msix_entries[i].name, rsp); + if (IS_QLA82XX(ha)) { + ret = request_irq(qentry->vector, + qla82xx_msix_entries[i].handler, + 0, qla82xx_msix_entries[i].name, rsp); + } else { + ret = request_irq(qentry->vector, + msix_entries[i].handler, + 0, msix_entries[i].name, rsp); + } if (ret) { qla_printk(KERN_WARNING, ha, "MSI-X: Unable to register handler -- %x/%d.\n", @@ -2272,7 +2290,7 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp) /* If possible, enable MSI-X. */ if (!IS_QLA2432(ha) && !IS_QLA2532(ha) && - !IS_QLA8432(ha) && !IS_QLA8001(ha)) + !IS_QLA8432(ha) && !IS_QLA8XXX_TYPE(ha)) goto skip_msi; if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP && @@ -2302,7 +2320,7 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp) goto clear_risc_ints; } qla_printk(KERN_WARNING, ha, - "MSI-X: Falling back-to INTa mode -- %d.\n", ret); + "MSI-X: Falling back-to MSI mode -- %d.\n", ret); skip_msix: if (!IS_QLA24XX(ha) && !IS_QLA2532(ha) && !IS_QLA8432(ha) && @@ -2313,7 +2331,9 @@ skip_msix: if (!ret) { DEBUG2(qla_printk(KERN_INFO, ha, "MSI: Enabled.\n")); ha->flags.msi_enabled = 1; - } + } else + qla_printk(KERN_WARNING, ha, + "MSI-X: Falling back-to INTa mode -- %d.\n", ret); skip_msi: ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler, @@ -2331,7 +2351,7 @@ clear_risc_ints: * FIXME: Noted that 8014s were being dropped during NK testing. * Timing deltas during MSI-X/INTa transitions? */ - if (IS_QLA81XX(ha)) + if (IS_QLA81XX(ha) || IS_QLA82XX(ha)) goto fail; spin_lock_irq(&ha->hardware_lock); if (IS_FWI2_CAPABLE(ha)) { diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index bce6cd47e3c3..2f3033228061 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -49,6 +49,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (ha->pdev->error_state > pci_channel_io_frozen) return QLA_FUNCTION_TIMEOUT; + if (vha->device_flags & DFLG_DEV_FAILED) { + DEBUG2_3_11(qla_printk(KERN_WARNING, ha, + "%s(%ld): Device in failed state, " + "timeout MBX Exiting.\n", + __func__, base_vha->host_no)); + return QLA_FUNCTION_TIMEOUT; + } + reg = ha->iobase; io_lock_on = base_vha->flags.init_done; @@ -85,7 +93,9 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) spin_lock_irqsave(&ha->hardware_lock, flags); /* Load mailbox registers. */ - if (IS_FWI2_CAPABLE(ha)) + if (IS_QLA82XX(ha)) + optr = (uint16_t __iomem *)®->isp82.mailbox_in[0]; + else if (IS_FWI2_CAPABLE(ha) && !IS_QLA82XX(ha)) optr = (uint16_t __iomem *)®->isp24.mailbox0; else optr = (uint16_t __iomem *)MAILBOX_REG(ha, ®->isp, 0); @@ -133,7 +143,18 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if ((!abort_active && io_lock_on) || IS_NOPOLLING_TYPE(ha)) { set_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); - if (IS_FWI2_CAPABLE(ha)) + if (IS_QLA82XX(ha)) { + if (RD_REG_DWORD(®->isp82.hint) & + HINT_MBX_INT_PENDING) { + spin_unlock_irqrestore(&ha->hardware_lock, + flags); + DEBUG2_3_11(printk(KERN_INFO + "%s(%ld): Pending Mailbox timeout. " + "Exiting.\n", __func__, base_vha->host_no)); + return QLA_FUNCTION_TIMEOUT; + } + WRT_REG_DWORD(®->isp82.hint, HINT_MBX_INT_PENDING); + } else if (IS_FWI2_CAPABLE(ha)) WRT_REG_DWORD(®->isp24.hccr, HCCRX_SET_HOST_INT); else WRT_REG_WORD(®->isp.hccr, HCCR_SET_HOST_INT); @@ -147,7 +168,18 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__, base_vha->host_no, command)); - if (IS_FWI2_CAPABLE(ha)) + if (IS_QLA82XX(ha)) { + if (RD_REG_DWORD(®->isp82.hint) & + HINT_MBX_INT_PENDING) { + spin_unlock_irqrestore(&ha->hardware_lock, + flags); + DEBUG2_3_11(printk(KERN_INFO + "%s(%ld): Pending Mailbox timeout. " + "Exiting.\n", __func__, base_vha->host_no)); + return QLA_FUNCTION_TIMEOUT; + } + WRT_REG_DWORD(®->isp82.hint, HINT_MBX_INT_PENDING); + } else if (IS_FWI2_CAPABLE(ha)) WRT_REG_DWORD(®->isp24.hccr, HCCRX_SET_HOST_INT); else WRT_REG_WORD(®->isp.hccr, HCCR_SET_HOST_INT); @@ -264,7 +296,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); clear_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); - if (qla2x00_abort_isp(base_vha)) { + if (ha->isp_ops->abort_isp(base_vha)) { /* Failed. retry later. */ set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); } @@ -952,7 +984,7 @@ qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t *id, uint8_t *al_pa, mcp->mb[9] = vha->vp_idx; mcp->out_mb = MBX_9|MBX_0; mcp->in_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; - if (IS_QLA81XX(vha->hw)) + if (IS_QLA8XXX_TYPE(vha->hw)) mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10; mcp->tov = MBX_TOV_SECONDS; mcp->flags = 0; @@ -978,7 +1010,7 @@ qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t *id, uint8_t *al_pa, DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n", vha->host_no)); - if (IS_QLA81XX(vha->hw)) { + if (IS_QLA8XXX_TYPE(vha->hw)) { vha->fcoe_vlan_id = mcp->mb[9] & 0xfff; vha->fcoe_fcf_idx = mcp->mb[10]; vha->fcoe_vn_port_mac[5] = mcp->mb[11] >> 8; @@ -1076,6 +1108,10 @@ qla2x00_init_firmware(scsi_qla_host_t *vha, uint16_t size) DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n", vha->host_no)); + if (IS_QLA82XX(ha) && ql2xdbwr) + qla82xx_wr_32(ha, ha->nxdb_wr_ptr, + (0x04 | (ha->portnum << 5) | (0 << 8) | (0 << 16))); + if (ha->flags.npiv_supported) mcp->mb[0] = MBC_MID_INITIALIZE_FIRMWARE; else @@ -1408,7 +1444,7 @@ qla2x00_lip_reset(scsi_qla_host_t *vha) DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); - if (IS_QLA81XX(vha->hw)) { + if (IS_QLA8XXX_TYPE(vha->hw)) { /* Logout across all FCFs. */ mcp->mb[0] = MBC_LIP_FULL_LOGIN; mcp->mb[1] = BIT_1; @@ -2797,7 +2833,7 @@ qla2x00_set_idma_speed(scsi_qla_host_t *vha, uint16_t loop_id, mcp->mb[0] = MBC_PORT_PARAMS; mcp->mb[1] = loop_id; mcp->mb[2] = BIT_0; - if (IS_QLA81XX(vha->hw)) + if (IS_QLA8XXX_TYPE(vha->hw)) mcp->mb[3] = port_speed & (BIT_5|BIT_4|BIT_3|BIT_2|BIT_1|BIT_0); else mcp->mb[3] = port_speed & (BIT_2|BIT_1|BIT_0); @@ -3586,7 +3622,7 @@ qla2x00_get_xgmac_stats(scsi_qla_host_t *vha, dma_addr_t stats_dma, mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - if (!IS_QLA81XX(vha->hw)) + if (!IS_QLA8XXX_TYPE(vha->hw)) return QLA_FUNCTION_FAILED; DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); @@ -3624,7 +3660,7 @@ qla2x00_get_dcbx_params(scsi_qla_host_t *vha, dma_addr_t tlv_dma, mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - if (!IS_QLA81XX(vha->hw)) + if (!IS_QLA8XXX_TYPE(vha->hw)) return QLA_FUNCTION_FAILED; DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); @@ -3685,7 +3721,8 @@ qla2x00_read_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t *data) } int -qla2x00_loopback_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, uint16_t *mresp) +qla2x00_loopback_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, + uint16_t *mresp) { int rval; mbx_cmd_t mc; @@ -3720,7 +3757,7 @@ qla2x00_loopback_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, uint16_t * mcp->out_mb = MBX_21|MBX_20|MBX_19|MBX_18|MBX_17|MBX_16|MBX_15| MBX_14|MBX_13|MBX_12|MBX_11|MBX_10|MBX_7|MBX_6|MBX_1|MBX_0; - if (IS_QLA81XX(vha->hw)) + if (IS_QLA8XXX_TYPE(vha->hw)) mcp->out_mb |= MBX_2; mcp->in_mb = MBX_19|MBX_18|MBX_3|MBX_2|MBX_1|MBX_0; @@ -3732,9 +3769,11 @@ qla2x00_loopback_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, uint16_t * if (rval != QLA_SUCCESS) { DEBUG2(printk(KERN_WARNING - "(%ld): failed=%x mb[0]=0x%x " - "mb[1]=0x%x mb[2]=0x%x mb[3]=0x%x mb[18]=0x%x mb[19]=0x%x. \n", vha->host_no, rval, - mcp->mb[0], mcp->mb[1], mcp->mb[2], mcp->mb[3], mcp->mb[18], mcp->mb[19])); + "(%ld): failed=%x mb[0]=0x%x " + "mb[1]=0x%x mb[2]=0x%x mb[3]=0x%x mb[18]=0x%x " + "mb[19]=0x%x.\n", + vha->host_no, rval, mcp->mb[0], mcp->mb[1], mcp->mb[2], + mcp->mb[3], mcp->mb[18], mcp->mb[19])); } else { DEBUG2(printk(KERN_WARNING "scsi(%ld): done.\n", vha->host_no)); @@ -3748,7 +3787,8 @@ qla2x00_loopback_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, uint16_t * } int -qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, uint16_t *mresp) +qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, + uint16_t *mresp) { int rval; mbx_cmd_t mc; @@ -3760,9 +3800,10 @@ qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, uint16_t *mres memset(mcp->mb, 0 , sizeof(mcp->mb)); mcp->mb[0] = MBC_DIAGNOSTIC_ECHO; mcp->mb[1] = mreq->options | BIT_6; /* BIT_6 specifies 64bit address */ - if (IS_QLA81XX(ha)) + if (IS_QLA8XXX_TYPE(ha)) { mcp->mb[1] |= BIT_15; - mcp->mb[2] = IS_QLA81XX(ha) ? vha->fcoe_fcf_idx : 0; + mcp->mb[2] = vha->fcoe_fcf_idx; + } mcp->mb[16] = LSW(mreq->rcv_dma); mcp->mb[17] = MSW(mreq->rcv_dma); mcp->mb[6] = LSW(MSD(mreq->rcv_dma)); @@ -3777,13 +3818,13 @@ qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, uint16_t *mres mcp->out_mb = MBX_21|MBX_20|MBX_17|MBX_16|MBX_15| MBX_14|MBX_10|MBX_7|MBX_6|MBX_1|MBX_0; - if (IS_QLA81XX(ha)) + if (IS_QLA8XXX_TYPE(ha)) mcp->out_mb |= MBX_2; mcp->in_mb = MBX_0; - if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) + if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) || IS_QLA8XXX_TYPE(ha)) mcp->in_mb |= MBX_1; - if (IS_QLA81XX(ha)) + if (IS_QLA8XXX_TYPE(ha)) mcp->in_mb |= MBX_3; mcp->tov = MBX_TOV_SECONDS; @@ -3875,7 +3916,8 @@ qla2x00_get_data_rate(scsi_qla_host_t *vha) if (!IS_FWI2_CAPABLE(ha)) return QLA_FUNCTION_FAILED; - DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, vha->host_no)); + DEBUG11(qla_printk(KERN_INFO, ha, + "%s(%ld): entered.\n", __func__, vha->host_no)); mcp->mb[0] = MBC_DATA_RATE; mcp->mb[1] = 0; @@ -3943,3 +3985,75 @@ qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority, return rval; } + +int +qla82xx_mbx_intr_enable(scsi_qla_host_t *vha) +{ + int rval; + struct qla_hw_data *ha = vha->hw; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_FWI2_CAPABLE(ha)) + return QLA_FUNCTION_FAILED; + + DEBUG11(qla_printk(KERN_INFO, ha, + "%s(%ld): entered.\n", __func__, vha->host_no)); + + memset(mcp, 0, sizeof(mbx_cmd_t)); + mcp->mb[0] = MBC_TOGGLE_INTR; + mcp->mb[1] = 1; + + mcp->out_mb = MBX_1|MBX_0; + mcp->in_mb = MBX_0; + mcp->tov = 30; + mcp->flags = 0; + + rval = qla2x00_mailbox_command(vha, mcp); + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(qla_printk(KERN_WARNING, ha, + "%s(%ld): failed=%x mb[0]=%x.\n", __func__, + vha->host_no, rval, mcp->mb[0])); + } else { + DEBUG11(qla_printk(KERN_INFO, ha, + "%s(%ld): done.\n", __func__, vha->host_no)); + } + + return rval; +} + +int +qla82xx_mbx_intr_disable(scsi_qla_host_t *vha) +{ + int rval; + struct qla_hw_data *ha = vha->hw; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_QLA82XX(ha)) + return QLA_FUNCTION_FAILED; + + DEBUG11(qla_printk(KERN_INFO, ha, + "%s(%ld): entered.\n", __func__, vha->host_no)); + + memset(mcp, 0, sizeof(mbx_cmd_t)); + mcp->mb[0] = MBC_TOGGLE_INTR; + mcp->mb[1] = 0; + + mcp->out_mb = MBX_1|MBX_0; + mcp->in_mb = MBX_0; + mcp->tov = 30; + mcp->flags = 0; + + rval = qla2x00_mailbox_command(vha, mcp); + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(qla_printk(KERN_WARNING, ha, + "%s(%ld): failed=%x mb[0]=%x.\n", __func__, + vha->host_no, rval, mcp->mb[0])); + } else { + DEBUG11(qla_printk(KERN_INFO, ha, + "%s(%ld): done.\n", __func__, vha->host_no)); + } + + return rval; +} diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c new file mode 100644 index 000000000000..495ff1ade36e --- /dev/null +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -0,0 +1,3635 @@ +/* + * QLogic Fibre Channel HBA Driver + * Copyright (c) 2003-2008 QLogic Corporation + * + * See LICENSE.qla2xxx for copyright and licensing details. + */ +#include "qla_def.h" +#include +#include + +#define MASK(n) ((1ULL<<(n))-1) +#define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | \ + ((addr >> 25) & 0x3ff)) +#define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | \ + ((addr >> 25) & 0x3ff)) +#define MS_WIN(addr) (addr & 0x0ffc0000) +#define QLA82XX_PCI_MN_2M (0) +#define QLA82XX_PCI_MS_2M (0x80000) +#define QLA82XX_PCI_OCM0_2M (0xc0000) +#define VALID_OCM_ADDR(addr) (((addr) & 0x3f800) != 0x3f800) +#define GET_MEM_OFFS_2M(addr) (addr & MASK(18)) + +/* CRB window related */ +#define CRB_BLK(off) ((off >> 20) & 0x3f) +#define CRB_SUBBLK(off) ((off >> 16) & 0xf) +#define CRB_WINDOW_2M (0x130060) +#define QLA82XX_PCI_CAMQM_2M_END (0x04800800UL) +#define CRB_HI(off) ((qla82xx_crb_hub_agt[CRB_BLK(off)] << 20) | \ + ((off) & 0xf0000)) +#define QLA82XX_PCI_CAMQM_2M_BASE (0x000ff800UL) +#define CRB_INDIRECT_2M (0x1e0000UL) + +static inline void *qla82xx_pci_base_offsetfset(struct qla_hw_data *ha, + unsigned long off) +{ + if ((off < ha->first_page_group_end) && + (off >= ha->first_page_group_start)) + return (void *)(ha->nx_pcibase + off); + + return NULL; +} + +#define MAX_CRB_XFORM 60 +static unsigned long crb_addr_xform[MAX_CRB_XFORM]; +int qla82xx_crb_table_initialized; + +#define qla82xx_crb_addr_transform(name) \ + (crb_addr_xform[QLA82XX_HW_PX_MAP_CRB_##name] = \ + QLA82XX_HW_CRB_HUB_AGT_ADR_##name << 20) + +static void qla82xx_crb_addr_transform_setup(void) +{ + qla82xx_crb_addr_transform(XDMA); + qla82xx_crb_addr_transform(TIMR); + qla82xx_crb_addr_transform(SRE); + qla82xx_crb_addr_transform(SQN3); + qla82xx_crb_addr_transform(SQN2); + qla82xx_crb_addr_transform(SQN1); + qla82xx_crb_addr_transform(SQN0); + qla82xx_crb_addr_transform(SQS3); + qla82xx_crb_addr_transform(SQS2); + qla82xx_crb_addr_transform(SQS1); + qla82xx_crb_addr_transform(SQS0); + qla82xx_crb_addr_transform(RPMX7); + qla82xx_crb_addr_transform(RPMX6); + qla82xx_crb_addr_transform(RPMX5); + qla82xx_crb_addr_transform(RPMX4); + qla82xx_crb_addr_transform(RPMX3); + qla82xx_crb_addr_transform(RPMX2); + qla82xx_crb_addr_transform(RPMX1); + qla82xx_crb_addr_transform(RPMX0); + qla82xx_crb_addr_transform(ROMUSB); + qla82xx_crb_addr_transform(SN); + qla82xx_crb_addr_transform(QMN); + qla82xx_crb_addr_transform(QMS); + qla82xx_crb_addr_transform(PGNI); + qla82xx_crb_addr_transform(PGND); + qla82xx_crb_addr_transform(PGN3); + qla82xx_crb_addr_transform(PGN2); + qla82xx_crb_addr_transform(PGN1); + qla82xx_crb_addr_transform(PGN0); + qla82xx_crb_addr_transform(PGSI); + qla82xx_crb_addr_transform(PGSD); + qla82xx_crb_addr_transform(PGS3); + qla82xx_crb_addr_transform(PGS2); + qla82xx_crb_addr_transform(PGS1); + qla82xx_crb_addr_transform(PGS0); + qla82xx_crb_addr_transform(PS); + qla82xx_crb_addr_transform(PH); + qla82xx_crb_addr_transform(NIU); + qla82xx_crb_addr_transform(I2Q); + qla82xx_crb_addr_transform(EG); + qla82xx_crb_addr_transform(MN); + qla82xx_crb_addr_transform(MS); + qla82xx_crb_addr_transform(CAS2); + qla82xx_crb_addr_transform(CAS1); + qla82xx_crb_addr_transform(CAS0); + qla82xx_crb_addr_transform(CAM); + qla82xx_crb_addr_transform(C2C1); + qla82xx_crb_addr_transform(C2C0); + qla82xx_crb_addr_transform(SMB); + qla82xx_crb_addr_transform(OCM0); + /* + * Used only in P3 just define it for P2 also. + */ + qla82xx_crb_addr_transform(I2C0); + + qla82xx_crb_table_initialized = 1; +} + +struct crb_128M_2M_block_map crb_128M_2M_map[64] = { + {{{0, 0, 0, 0} } }, + {{{1, 0x0100000, 0x0102000, 0x120000}, + {1, 0x0110000, 0x0120000, 0x130000}, + {1, 0x0120000, 0x0122000, 0x124000}, + {1, 0x0130000, 0x0132000, 0x126000}, + {1, 0x0140000, 0x0142000, 0x128000}, + {1, 0x0150000, 0x0152000, 0x12a000}, + {1, 0x0160000, 0x0170000, 0x110000}, + {1, 0x0170000, 0x0172000, 0x12e000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {1, 0x01e0000, 0x01e0800, 0x122000}, + {0, 0x0000000, 0x0000000, 0x000000} } } , + {{{1, 0x0200000, 0x0210000, 0x180000} } }, + {{{0, 0, 0, 0} } }, + {{{1, 0x0400000, 0x0401000, 0x169000} } }, + {{{1, 0x0500000, 0x0510000, 0x140000} } }, + {{{1, 0x0600000, 0x0610000, 0x1c0000} } }, + {{{1, 0x0700000, 0x0704000, 0x1b8000} } }, + {{{1, 0x0800000, 0x0802000, 0x170000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {1, 0x08f0000, 0x08f2000, 0x172000} } }, + {{{1, 0x0900000, 0x0902000, 0x174000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {1, 0x09f0000, 0x09f2000, 0x176000} } }, + {{{0, 0x0a00000, 0x0a02000, 0x178000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {1, 0x0af0000, 0x0af2000, 0x17a000} } }, + {{{0, 0x0b00000, 0x0b02000, 0x17c000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {1, 0x0bf0000, 0x0bf2000, 0x17e000} } }, + {{{1, 0x0c00000, 0x0c04000, 0x1d4000} } }, + {{{1, 0x0d00000, 0x0d04000, 0x1a4000} } }, + {{{1, 0x0e00000, 0x0e04000, 0x1a0000} } }, + {{{1, 0x0f00000, 0x0f01000, 0x164000} } }, + {{{0, 0x1000000, 0x1004000, 0x1a8000} } }, + {{{1, 0x1100000, 0x1101000, 0x160000} } }, + {{{1, 0x1200000, 0x1201000, 0x161000} } }, + {{{1, 0x1300000, 0x1301000, 0x162000} } }, + {{{1, 0x1400000, 0x1401000, 0x163000} } }, + {{{1, 0x1500000, 0x1501000, 0x165000} } }, + {{{1, 0x1600000, 0x1601000, 0x166000} } }, + {{{0, 0, 0, 0} } }, + {{{0, 0, 0, 0} } }, + {{{0, 0, 0, 0} } }, + {{{0, 0, 0, 0} } }, + {{{0, 0, 0, 0} } }, + {{{0, 0, 0, 0} } }, + {{{1, 0x1d00000, 0x1d10000, 0x190000} } }, + {{{1, 0x1e00000, 0x1e01000, 0x16a000} } }, + {{{1, 0x1f00000, 0x1f10000, 0x150000} } }, + {{{0} } }, + {{{1, 0x2100000, 0x2102000, 0x120000}, + {1, 0x2110000, 0x2120000, 0x130000}, + {1, 0x2120000, 0x2122000, 0x124000}, + {1, 0x2130000, 0x2132000, 0x126000}, + {1, 0x2140000, 0x2142000, 0x128000}, + {1, 0x2150000, 0x2152000, 0x12a000}, + {1, 0x2160000, 0x2170000, 0x110000}, + {1, 0x2170000, 0x2172000, 0x12e000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000}, + {0, 0x0000000, 0x0000000, 0x000000} } }, + {{{1, 0x2200000, 0x2204000, 0x1b0000} } }, + {{{0} } }, + {{{0} } }, + {{{0} } }, + {{{0} } }, + {{{0} } }, + {{{1, 0x2800000, 0x2804000, 0x1a4000} } }, + {{{1, 0x2900000, 0x2901000, 0x16b000} } }, + {{{1, 0x2a00000, 0x2a00400, 0x1ac400} } }, + {{{1, 0x2b00000, 0x2b00400, 0x1ac800} } }, + {{{1, 0x2c00000, 0x2c00400, 0x1acc00} } }, + {{{1, 0x2d00000, 0x2d00400, 0x1ad000} } }, + {{{1, 0x2e00000, 0x2e00400, 0x1ad400} } }, + {{{1, 0x2f00000, 0x2f00400, 0x1ad800} } }, + {{{1, 0x3000000, 0x3000400, 0x1adc00} } }, + {{{0, 0x3100000, 0x3104000, 0x1a8000} } }, + {{{1, 0x3200000, 0x3204000, 0x1d4000} } }, + {{{1, 0x3300000, 0x3304000, 0x1a0000} } }, + {{{0} } }, + {{{1, 0x3500000, 0x3500400, 0x1ac000} } }, + {{{1, 0x3600000, 0x3600400, 0x1ae000} } }, + {{{1, 0x3700000, 0x3700400, 0x1ae400} } }, + {{{1, 0x3800000, 0x3804000, 0x1d0000} } }, + {{{1, 0x3900000, 0x3904000, 0x1b4000} } }, + {{{1, 0x3a00000, 0x3a04000, 0x1d8000} } }, + {{{0} } }, + {{{0} } }, + {{{1, 0x3d00000, 0x3d04000, 0x1dc000} } }, + {{{1, 0x3e00000, 0x3e01000, 0x167000} } }, + {{{1, 0x3f00000, 0x3f01000, 0x168000} } } +}; + +/* + * top 12 bits of crb internal address (hub, agent) + */ +unsigned qla82xx_crb_hub_agt[64] = { + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PS, + QLA82XX_HW_CRB_HUB_AGT_ADR_MN, + QLA82XX_HW_CRB_HUB_AGT_ADR_MS, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_SRE, + QLA82XX_HW_CRB_HUB_AGT_ADR_NIU, + QLA82XX_HW_CRB_HUB_AGT_ADR_QMN, + QLA82XX_HW_CRB_HUB_AGT_ADR_SQN0, + QLA82XX_HW_CRB_HUB_AGT_ADR_SQN1, + QLA82XX_HW_CRB_HUB_AGT_ADR_SQN2, + QLA82XX_HW_CRB_HUB_AGT_ADR_SQN3, + QLA82XX_HW_CRB_HUB_AGT_ADR_I2Q, + QLA82XX_HW_CRB_HUB_AGT_ADR_TIMR, + QLA82XX_HW_CRB_HUB_AGT_ADR_ROMUSB, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGN4, + QLA82XX_HW_CRB_HUB_AGT_ADR_XDMA, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGN0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGN1, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGN2, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGN3, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGND, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGNI, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGS0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGS1, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGS2, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGS3, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGSI, + QLA82XX_HW_CRB_HUB_AGT_ADR_SN, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_EG, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PS, + QLA82XX_HW_CRB_HUB_AGT_ADR_CAM, + 0, + 0, + 0, + 0, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_TIMR, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX1, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX2, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX3, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX4, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX5, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX6, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX7, + QLA82XX_HW_CRB_HUB_AGT_ADR_XDMA, + QLA82XX_HW_CRB_HUB_AGT_ADR_I2Q, + QLA82XX_HW_CRB_HUB_AGT_ADR_ROMUSB, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX0, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX8, + QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX9, + QLA82XX_HW_CRB_HUB_AGT_ADR_OCM0, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_SMB, + QLA82XX_HW_CRB_HUB_AGT_ADR_I2C0, + QLA82XX_HW_CRB_HUB_AGT_ADR_I2C1, + 0, + QLA82XX_HW_CRB_HUB_AGT_ADR_PGNC, + 0, +}; + +/* + * In: 'off' is offset from CRB space in 128M pci map + * Out: 'off' is 2M pci map addr + * side effect: lock crb window + */ +static void +qla82xx_pci_set_crbwindow_2M(struct qla_hw_data *ha, ulong *off) +{ + u32 win_read; + + ha->crb_win = CRB_HI(*off); + writel(ha->crb_win, + (void *)(CRB_WINDOW_2M + ha->nx_pcibase)); + + /* Read back value to make sure write has gone through before trying + * to use it. + */ + win_read = RD_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase)); + if (win_read != ha->crb_win) { + DEBUG2(qla_printk(KERN_INFO, ha, + "%s: Written crbwin (0x%x) != Read crbwin (0x%x), " + "off=0x%lx\n", __func__, ha->crb_win, win_read, *off)); + } + *off = (*off & MASK(16)) + CRB_INDIRECT_2M + ha->nx_pcibase; +} + +static inline unsigned long +qla82xx_pci_set_crbwindow(struct qla_hw_data *ha, u64 off) +{ + /* See if we are currently pointing to the region we want to use next */ + if ((off >= QLA82XX_CRB_PCIX_HOST) && (off < QLA82XX_CRB_DDR_NET)) { + /* No need to change window. PCIX and PCIEregs are in both + * regs are in both windows. + */ + return off; + } + + if ((off >= QLA82XX_CRB_PCIX_HOST) && (off < QLA82XX_CRB_PCIX_HOST2)) { + /* We are in first CRB window */ + if (ha->curr_window != 0) + WARN_ON(1); + return off; + } + + if ((off > QLA82XX_CRB_PCIX_HOST2) && (off < QLA82XX_CRB_MAX)) { + /* We are in second CRB window */ + off = off - QLA82XX_CRB_PCIX_HOST2 + QLA82XX_CRB_PCIX_HOST; + + if (ha->curr_window != 1) + return off; + + /* We are in the QM or direct access + * register region - do nothing + */ + if ((off >= QLA82XX_PCI_DIRECT_CRB) && + (off < QLA82XX_PCI_CAMQM_MAX)) + return off; + } + /* strange address given */ + qla_printk(KERN_WARNING, ha, + "%s: Warning: unm_nic_pci_set_crbwindow called with" + " an unknown address(%llx)\n", QLA2XXX_DRIVER_NAME, off); + return off; +} + +int +qla82xx_wr_32(struct qla_hw_data *ha, ulong off, u32 data) +{ + unsigned long flags = 0; + int rv; + + rv = qla82xx_pci_get_crb_addr_2M(ha, &off); + + BUG_ON(rv == -1); + + if (rv == 1) { + write_lock_irqsave(&ha->hw_lock, flags); + qla82xx_crb_win_lock(ha); + qla82xx_pci_set_crbwindow_2M(ha, &off); + } + + writel(data, (void __iomem *)off); + + if (rv == 1) { + qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM7_UNLOCK)); + write_unlock_irqrestore(&ha->hw_lock, flags); + } + return 0; +} + +int +qla82xx_rd_32(struct qla_hw_data *ha, ulong off) +{ + unsigned long flags = 0; + int rv; + u32 data; + + rv = qla82xx_pci_get_crb_addr_2M(ha, &off); + + BUG_ON(rv == -1); + + if (rv == 1) { + write_lock_irqsave(&ha->hw_lock, flags); + qla82xx_crb_win_lock(ha); + qla82xx_pci_set_crbwindow_2M(ha, &off); + } + data = RD_REG_DWORD((void __iomem *)off); + + if (rv == 1) { + qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM7_UNLOCK)); + write_unlock_irqrestore(&ha->hw_lock, flags); + } + return data; +} + +#define CRB_WIN_LOCK_TIMEOUT 100000000 +int qla82xx_crb_win_lock(struct qla_hw_data *ha) +{ + int done = 0, timeout = 0; + + while (!done) { + /* acquire semaphore3 from PCI HW block */ + done = qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM7_LOCK)); + if (done == 1) + break; + if (timeout >= CRB_WIN_LOCK_TIMEOUT) + return -1; + timeout++; + } + qla82xx_wr_32(ha, QLA82XX_CRB_WIN_LOCK_ID, ha->portnum); + return 0; +} + +#define IDC_LOCK_TIMEOUT 100000000 +int qla82xx_idc_lock(struct qla_hw_data *ha) +{ + int i; + int done = 0, timeout = 0; + + while (!done) { + /* acquire semaphore5 from PCI HW block */ + done = qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM5_LOCK)); + if (done == 1) + break; + if (timeout >= IDC_LOCK_TIMEOUT) + return -1; + + timeout++; + + /* Yield CPU */ + if (!in_interrupt()) + schedule(); + else { + for (i = 0; i < 20; i++) + cpu_relax(); + } + } + + return 0; +} + +void qla82xx_idc_unlock(struct qla_hw_data *ha) +{ + qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM5_UNLOCK)); +} + +int +qla82xx_pci_get_crb_addr_2M(struct qla_hw_data *ha, ulong *off) +{ + struct crb_128M_2M_sub_block_map *m; + + if (*off >= QLA82XX_CRB_MAX) + return -1; + + if (*off >= QLA82XX_PCI_CAMQM && (*off < QLA82XX_PCI_CAMQM_2M_END)) { + *off = (*off - QLA82XX_PCI_CAMQM) + + QLA82XX_PCI_CAMQM_2M_BASE + ha->nx_pcibase; + return 0; + } + + if (*off < QLA82XX_PCI_CRBSPACE) + return -1; + + *off -= QLA82XX_PCI_CRBSPACE; + + /* Try direct map */ + m = &crb_128M_2M_map[CRB_BLK(*off)].sub_block[CRB_SUBBLK(*off)]; + + if (m->valid && (m->start_128M <= *off) && (m->end_128M > *off)) { + *off = *off + m->start_2M - m->start_128M + ha->nx_pcibase; + return 0; + } + /* Not in direct map, use crb window */ + return 1; +} + +/* PCI Windowing for DDR regions. */ +#define QLA82XX_ADDR_IN_RANGE(addr, low, high) \ + (((addr) <= (high)) && ((addr) >= (low))) +/* + * check memory access boundary. + * used by test agent. support ddr access only for now + */ +static unsigned long +qla82xx_pci_mem_bound_check(struct qla_hw_data *ha, + unsigned long long addr, int size) +{ + if (!QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, + QLA82XX_ADDR_DDR_NET_MAX) || + !QLA82XX_ADDR_IN_RANGE(addr + size - 1, QLA82XX_ADDR_DDR_NET, + QLA82XX_ADDR_DDR_NET_MAX) || + ((size != 1) && (size != 2) && (size != 4) && (size != 8))) + return 0; + else + return 1; +} + +int qla82xx_pci_set_window_warning_count; + +unsigned long +qla82xx_pci_set_window(struct qla_hw_data *ha, unsigned long long addr) +{ + int window; + u32 win_read; + + if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, + QLA82XX_ADDR_DDR_NET_MAX)) { + /* DDR network side */ + window = MN_WIN(addr); + ha->ddr_mn_window = window; + qla82xx_wr_32(ha, + ha->mn_win_crb | QLA82XX_PCI_CRBSPACE, window); + win_read = qla82xx_rd_32(ha, + ha->mn_win_crb | QLA82XX_PCI_CRBSPACE); + if ((win_read << 17) != window) { + qla_printk(KERN_WARNING, ha, + "%s: Written MNwin (0x%x) != Read MNwin (0x%x)\n", + __func__, window, win_read); + } + addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_DDR_NET; + } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM0, + QLA82XX_ADDR_OCM0_MAX)) { + unsigned int temp1; + if ((addr & 0x00ff800) == 0xff800) { + qla_printk(KERN_WARNING, ha, + "%s: QM access not handled.\n", __func__); + addr = -1UL; + } + window = OCM_WIN(addr); + ha->ddr_mn_window = window; + qla82xx_wr_32(ha, + ha->mn_win_crb | QLA82XX_PCI_CRBSPACE, window); + win_read = qla82xx_rd_32(ha, + ha->mn_win_crb | QLA82XX_PCI_CRBSPACE); + temp1 = ((window & 0x1FF) << 7) | + ((window & 0x0FFFE0000) >> 17); + if (win_read != temp1) { + qla_printk(KERN_WARNING, ha, + "%s: Written OCMwin (0x%x) != Read OCMwin (0x%x)\n", + __func__, temp1, win_read); + } + addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_OCM0_2M; + + } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_QDR_NET, + QLA82XX_P3_ADDR_QDR_NET_MAX)) { + /* QDR network side */ + window = MS_WIN(addr); + ha->qdr_sn_window = window; + qla82xx_wr_32(ha, + ha->ms_win_crb | QLA82XX_PCI_CRBSPACE, window); + win_read = qla82xx_rd_32(ha, + ha->ms_win_crb | QLA82XX_PCI_CRBSPACE); + if (win_read != window) { + qla_printk(KERN_WARNING, ha, + "%s: Written MSwin (0x%x) != Read MSwin (0x%x)\n", + __func__, window, win_read); + } + addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_QDR_NET; + } else { + /* + * peg gdb frequently accesses memory that doesn't exist, + * this limits the chit chat so debugging isn't slowed down. + */ + if ((qla82xx_pci_set_window_warning_count++ < 8) || + (qla82xx_pci_set_window_warning_count%64 == 0)) { + qla_printk(KERN_WARNING, ha, + "%s: Warning:%s Unknown address range!\n", __func__, + QLA2XXX_DRIVER_NAME); + } + addr = -1UL; + } + return addr; +} + +/* check if address is in the same windows as the previous access */ +static int qla82xx_pci_is_same_window(struct qla_hw_data *ha, + unsigned long long addr) +{ + int window; + unsigned long long qdr_max; + + qdr_max = QLA82XX_P3_ADDR_QDR_NET_MAX; + + /* DDR network side */ + if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, + QLA82XX_ADDR_DDR_NET_MAX)) + BUG(); + else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM0, + QLA82XX_ADDR_OCM0_MAX)) + return 1; + else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM1, + QLA82XX_ADDR_OCM1_MAX)) + return 1; + else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_QDR_NET, qdr_max)) { + /* QDR network side */ + window = ((addr - QLA82XX_ADDR_QDR_NET) >> 22) & 0x3f; + if (ha->qdr_sn_window == window) + return 1; + } + return 0; +} + +static int qla82xx_pci_mem_read_direct(struct qla_hw_data *ha, + u64 off, void *data, int size) +{ + unsigned long flags; + void *addr; + int ret = 0; + u64 start; + uint8_t *mem_ptr = NULL; + unsigned long mem_base; + unsigned long mem_page; + + write_lock_irqsave(&ha->hw_lock, flags); + + /* + * If attempting to access unknown address or straddle hw windows, + * do not access. + */ + start = qla82xx_pci_set_window(ha, off); + if ((start == -1UL) || + (qla82xx_pci_is_same_window(ha, off + size - 1) == 0)) { + write_unlock_irqrestore(&ha->hw_lock, flags); + qla_printk(KERN_ERR, ha, + "%s out of bound pci memory access. " + "offset is 0x%llx\n", QLA2XXX_DRIVER_NAME, off); + return -1; + } + + addr = qla82xx_pci_base_offsetfset(ha, start); + if (!addr) { + write_unlock_irqrestore(&ha->hw_lock, flags); + mem_base = pci_resource_start(ha->pdev, 0); + mem_page = start & PAGE_MASK; + /* Map two pages whenever user tries to access addresses in two + * consecutive pages. + */ + if (mem_page != ((start + size - 1) & PAGE_MASK)) + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2); + else + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); + if (mem_ptr == 0UL) { + *(u8 *)data = 0; + return -1; + } + addr = mem_ptr; + addr += start & (PAGE_SIZE - 1); + write_lock_irqsave(&ha->hw_lock, flags); + } + + switch (size) { + case 1: + *(u8 *)data = readb(addr); + break; + case 2: + *(u16 *)data = readw(addr); + break; + case 4: + *(u32 *)data = readl(addr); + break; + case 8: + *(u64 *)data = readq(addr); + break; + default: + ret = -1; + break; + } + write_unlock_irqrestore(&ha->hw_lock, flags); + + if (mem_ptr) + iounmap(mem_ptr); + return ret; +} + +static int +qla82xx_pci_mem_write_direct(struct qla_hw_data *ha, + u64 off, void *data, int size) +{ + unsigned long flags; + void *addr; + int ret = 0; + u64 start; + uint8_t *mem_ptr = NULL; + unsigned long mem_base; + unsigned long mem_page; + + write_lock_irqsave(&ha->hw_lock, flags); + + /* + * If attempting to access unknown address or straddle hw windows, + * do not access. + */ + start = qla82xx_pci_set_window(ha, off); + if ((start == -1UL) || + (qla82xx_pci_is_same_window(ha, off + size - 1) == 0)) { + write_unlock_irqrestore(&ha->hw_lock, flags); + qla_printk(KERN_ERR, ha, + "%s out of bound pci memory access. " + "offset is 0x%llx\n", QLA2XXX_DRIVER_NAME, off); + return -1; + } + + addr = qla82xx_pci_base_offsetfset(ha, start); + if (!addr) { + write_unlock_irqrestore(&ha->hw_lock, flags); + mem_base = pci_resource_start(ha->pdev, 0); + mem_page = start & PAGE_MASK; + /* Map two pages whenever user tries to access addresses in two + * consecutive pages. + */ + if (mem_page != ((start + size - 1) & PAGE_MASK)) + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2); + else + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); + if (mem_ptr == 0UL) + return -1; + + addr = mem_ptr; + addr += start & (PAGE_SIZE - 1); + write_lock_irqsave(&ha->hw_lock, flags); + } + + switch (size) { + case 1: + writeb(*(u8 *)data, addr); + break; + case 2: + writew(*(u16 *)data, addr); + break; + case 4: + writel(*(u32 *)data, addr); + break; + case 8: + writeq(*(u64 *)data, addr); + break; + default: + ret = -1; + break; + } + write_unlock_irqrestore(&ha->hw_lock, flags); + if (mem_ptr) + iounmap(mem_ptr); + return ret; +} + +int +qla82xx_wrmem(struct qla_hw_data *ha, u64 off, void *data, int size) +{ + int i, j, ret = 0, loop, sz[2], off0; + u32 temp; + u64 off8, mem_crb, tmpw, word[2] = {0, 0}; +#define MAX_CTL_CHECK 1000 + /* + * If not MN, go check for MS or invalid. + */ + if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) { + mem_crb = QLA82XX_CRB_QDR_NET; + } else { + mem_crb = QLA82XX_CRB_DDR_NET; + if (qla82xx_pci_mem_bound_check(ha, off, size) == 0) + return qla82xx_pci_mem_write_direct(ha, off, + data, size); + } + + off8 = off & 0xfffffff8; + off0 = off & 0x7; + sz[0] = (size < (8 - off0)) ? size : (8 - off0); + sz[1] = size - sz[0]; + loop = ((off0 + size - 1) >> 3) + 1; + + if ((size != 8) || (off0 != 0)) { + for (i = 0; i < loop; i++) { + if (qla82xx_rdmem(ha, off8 + (i << 3), &word[i], 8)) + return -1; + } + } + + switch (size) { + case 1: + tmpw = *((u8 *)data); + break; + case 2: + tmpw = *((u16 *)data); + break; + case 4: + tmpw = *((u32 *)data); + break; + case 8: + default: + tmpw = *((u64 *)data); + break; + } + + word[0] &= ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8)); + word[0] |= tmpw << (off0 * 8); + + if (loop == 2) { + word[1] &= ~(~0ULL << (sz[1] * 8)); + word[1] |= tmpw >> (sz[0] * 8); + } + + for (i = 0; i < loop; i++) { + temp = off8 + (i << 3); + qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_LO, temp); + temp = 0; + qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_HI, temp); + temp = word[i] & 0xffffffff; + qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_LO, temp); + temp = (word[i] >> 32) & 0xffffffff; + qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_HI, temp); + temp = MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; + qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_CTRL, temp); + temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; + qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_CTRL, temp); + + for (j = 0; j < MAX_CTL_CHECK; j++) { + temp = qla82xx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); + if ((temp & MIU_TA_CTL_BUSY) == 0) + break; + } + + if (j >= MAX_CTL_CHECK) { + qla_printk(KERN_WARNING, ha, + "%s: Fail to write through agent\n", + QLA2XXX_DRIVER_NAME); + ret = -1; + break; + } + } + return ret; +} + +int +qla82xx_rdmem(struct qla_hw_data *ha, u64 off, void *data, int size) +{ + int i, j = 0, k, start, end, loop, sz[2], off0[2]; + u32 temp; + u64 off8, val, mem_crb, word[2] = {0, 0}; +#define MAX_CTL_CHECK 1000 + + /* + * If not MN, go check for MS or invalid. + */ + if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) + mem_crb = QLA82XX_CRB_QDR_NET; + else { + mem_crb = QLA82XX_CRB_DDR_NET; + if (qla82xx_pci_mem_bound_check(ha, off, size) == 0) + return qla82xx_pci_mem_read_direct(ha, off, + data, size); + } + + off8 = off & 0xfffffff8; + off0[0] = off & 0x7; + off0[1] = 0; + sz[0] = (size < (8 - off0[0])) ? size : (8 - off0[0]); + sz[1] = size - sz[0]; + loop = ((off0[0] + size - 1) >> 3) + 1; + + for (i = 0; i < loop; i++) { + temp = off8 + (i << 3); + qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_LO, temp); + temp = 0; + qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_HI, temp); + temp = MIU_TA_CTL_ENABLE; + qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); + temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE; + qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); + + for (j = 0; j < MAX_CTL_CHECK; j++) { + temp = qla82xx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); + if ((temp & MIU_TA_CTL_BUSY) == 0) + break; + } + + if (j >= MAX_CTL_CHECK) { + qla_printk(KERN_INFO, ha, + "%s: Fail to read through agent\n", + QLA2XXX_DRIVER_NAME); + break; + } + + start = off0[i] >> 2; + end = (off0[i] + sz[i] - 1) >> 2; + for (k = start; k <= end; k++) { + temp = qla82xx_rd_32(ha, + mem_crb + MIU_TEST_AGT_RDDATA(k)); + word[i] |= ((u64)temp << (32 * k)); + } + } + + if (j >= MAX_CTL_CHECK) + return -1; + + if (sz[0] == 8) { + val = word[0]; + } else { + val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) | + ((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8)); + } + + switch (size) { + case 1: + *(u8 *)data = val; + break; + case 2: + *(u16 *)data = val; + break; + case 4: + *(u32 *)data = val; + break; + case 8: + *(u64 *)data = val; + break; + } + return 0; +} + +#define MTU_FUDGE_FACTOR 100 +unsigned long qla82xx_decode_crb_addr(unsigned long addr) +{ + int i; + unsigned long base_addr, offset, pci_base; + + if (!qla82xx_crb_table_initialized) + qla82xx_crb_addr_transform_setup(); + + pci_base = ADDR_ERROR; + base_addr = addr & 0xfff00000; + offset = addr & 0x000fffff; + + for (i = 0; i < MAX_CRB_XFORM; i++) { + if (crb_addr_xform[i] == base_addr) { + pci_base = i << 20; + break; + } + } + if (pci_base == ADDR_ERROR) + return pci_base; + return pci_base + offset; +} + +static long rom_max_timeout = 100; +static long qla82xx_rom_lock_timeout = 100; + +int +qla82xx_rom_lock(struct qla_hw_data *ha) +{ + int done = 0, timeout = 0; + + while (!done) { + /* acquire semaphore2 from PCI HW block */ + done = qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_LOCK)); + if (done == 1) + break; + if (timeout >= qla82xx_rom_lock_timeout) + return -1; + timeout++; + } + qla82xx_wr_32(ha, QLA82XX_ROM_LOCK_ID, ROM_LOCK_DRIVER); + return 0; +} + +int +qla82xx_wait_rom_busy(struct qla_hw_data *ha) +{ + long timeout = 0; + long done = 0 ; + + while (done == 0) { + done = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_STATUS); + done &= 4; + timeout++; + if (timeout >= rom_max_timeout) { + DEBUG(qla_printk(KERN_INFO, ha, + "%s: Timeout reached waiting for rom busy", + QLA2XXX_DRIVER_NAME)); + return -1; + } + } + return 0; +} + +int +qla82xx_wait_rom_done(struct qla_hw_data *ha) +{ + long timeout = 0; + long done = 0 ; + + while (done == 0) { + done = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_STATUS); + done &= 2; + timeout++; + if (timeout >= rom_max_timeout) { + DEBUG(qla_printk(KERN_INFO, ha, + "%s: Timeout reached waiting for rom done", + QLA2XXX_DRIVER_NAME)); + return -1; + } + } + return 0; +} + +int +qla82xx_do_rom_fast_read(struct qla_hw_data *ha, int addr, int *valp) +{ + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ADDRESS, addr); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 3); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, 0xb); + qla82xx_wait_rom_busy(ha); + if (qla82xx_wait_rom_done(ha)) { + qla_printk(KERN_WARNING, ha, + "%s: Error waiting for rom done\n", + QLA2XXX_DRIVER_NAME); + return -1; + } + /* Reset abyte_cnt and dummy_byte_cnt */ + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); + udelay(10); + cond_resched(); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 0); + *valp = qla82xx_rd_32(ha, QLA82XX_ROMUSB_ROM_RDATA); + return 0; +} + +int +qla82xx_rom_fast_read(struct qla_hw_data *ha, int addr, int *valp) +{ + int ret, loops = 0; + + while ((qla82xx_rom_lock(ha) != 0) && (loops < 50000)) { + udelay(100); + schedule(); + loops++; + } + if (loops >= 50000) { + qla_printk(KERN_INFO, ha, + "%s: qla82xx_rom_lock failed\n", + QLA2XXX_DRIVER_NAME); + return -1; + } + ret = qla82xx_do_rom_fast_read(ha, addr, valp); + qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); + return ret; +} + +int +qla82xx_read_status_reg(struct qla_hw_data *ha, uint32_t *val) +{ + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_RDSR); + qla82xx_wait_rom_busy(ha); + if (qla82xx_wait_rom_done(ha)) { + qla_printk(KERN_WARNING, ha, + "Error waiting for rom done\n"); + return -1; + } + *val = qla82xx_rd_32(ha, QLA82XX_ROMUSB_ROM_RDATA); + return 0; +} + +int +qla82xx_flash_wait_write_finish(struct qla_hw_data *ha) +{ + long timeout = 0; + uint32_t done = 1 ; + uint32_t val; + int ret = 0; + + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 0); + while ((done != 0) && (ret == 0)) { + ret = qla82xx_read_status_reg(ha, &val); + done = val & 1; + timeout++; + udelay(10); + cond_resched(); + if (timeout >= 50000) { + qla_printk(KERN_WARNING, ha, + "Timeout reached waiting for write finish"); + return -1; + } + } + return ret; +} + +int +qla82xx_flash_set_write_enable(struct qla_hw_data *ha) +{ + uint32_t val; + qla82xx_wait_rom_busy(ha); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 0); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_WREN); + qla82xx_wait_rom_busy(ha); + if (qla82xx_wait_rom_done(ha)) + return -1; + if (qla82xx_read_status_reg(ha, &val) != 0) + return -1; + if ((val & 2) != 2) + return -1; + return 0; +} + +int +qla82xx_write_status_reg(struct qla_hw_data *ha, uint32_t val) +{ + if (qla82xx_flash_set_write_enable(ha)) + return -1; + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_WDATA, val); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, 0x1); + if (qla82xx_wait_rom_done(ha)) { + qla_printk(KERN_WARNING, ha, + "Error waiting for rom done\n"); + return -1; + } + return qla82xx_flash_wait_write_finish(ha); +} + +int +qla82xx_write_disable_flash(struct qla_hw_data *ha) +{ + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_WRDI); + if (qla82xx_wait_rom_done(ha)) { + qla_printk(KERN_WARNING, ha, + "Error waiting for rom done\n"); + return -1; + } + return 0; +} + +int +ql82xx_rom_lock_d(struct qla_hw_data *ha) +{ + int loops = 0; + while ((qla82xx_rom_lock(ha) != 0) && (loops < 50000)) { + udelay(100); + cond_resched(); + loops++; + } + if (loops >= 50000) { + qla_printk(KERN_WARNING, ha, "ROM lock failed\n"); + return -1; + } + return 0;; +} + +int +qla82xx_write_flash_dword(struct qla_hw_data *ha, uint32_t flashaddr, + uint32_t data) +{ + int ret = 0; + + ret = ql82xx_rom_lock_d(ha); + if (ret < 0) { + qla_printk(KERN_WARNING, ha, "ROM Lock failed\n"); + return ret; + } + + if (qla82xx_flash_set_write_enable(ha)) + goto done_write; + + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_WDATA, data); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ADDRESS, flashaddr); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 3); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_PP); + qla82xx_wait_rom_busy(ha); + if (qla82xx_wait_rom_done(ha)) { + qla_printk(KERN_WARNING, ha, + "Error waiting for rom done\n"); + ret = -1; + goto done_write; + } + + ret = qla82xx_flash_wait_write_finish(ha); + +done_write: + qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); + return ret; +} + +/* This routine does CRB initialize sequence + * to put the ISP into operational state + */ +int qla82xx_pinit_from_rom(scsi_qla_host_t *vha) +{ + int addr, val; + int i ; + struct crb_addr_pair *buf; + unsigned long off; + unsigned offset, n; + struct qla_hw_data *ha = vha->hw; + + struct crb_addr_pair { + long addr; + long data; + }; + + /* Halt all the indiviual PEGs and other blocks of the ISP */ + qla82xx_rom_lock(ha); + if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) + /* don't reset CAM block on reset */ + qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff); + else + qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff); + qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); + + /* Read the signature value from the flash. + * Offset 0: Contain signature (0xcafecafe) + * Offset 4: Offset and number of addr/value pairs + * that present in CRB initialize sequence + */ + if (qla82xx_rom_fast_read(ha, 0, &n) != 0 || n != 0xcafecafeUL || + qla82xx_rom_fast_read(ha, 4, &n) != 0) { + qla_printk(KERN_WARNING, ha, + "[ERROR] Reading crb_init area: n: %08x\n", n); + return -1; + } + + /* Offset in flash = lower 16 bits + * Number of enteries = upper 16 bits + */ + offset = n & 0xffffU; + n = (n >> 16) & 0xffffU; + + /* number of addr/value pair should not exceed 1024 enteries */ + if (n >= 1024) { + qla_printk(KERN_WARNING, ha, + "%s: %s:n=0x%x [ERROR] Card flash not initialized.\n", + QLA2XXX_DRIVER_NAME, __func__, n); + return -1; + } + + qla_printk(KERN_INFO, ha, + "%s: %d CRB init values found in ROM.\n", QLA2XXX_DRIVER_NAME, n); + + buf = kmalloc(n * sizeof(struct crb_addr_pair), GFP_KERNEL); + if (buf == NULL) { + qla_printk(KERN_WARNING, ha, + "%s: [ERROR] Unable to malloc memory.\n", + QLA2XXX_DRIVER_NAME); + return -1; + } + + for (i = 0; i < n; i++) { + if (qla82xx_rom_fast_read(ha, 8*i + 4*offset, &val) != 0 || + qla82xx_rom_fast_read(ha, 8*i + 4*offset + 4, &addr) != 0) { + kfree(buf); + return -1; + } + + buf[i].addr = addr; + buf[i].data = val; + } + + for (i = 0; i < n; i++) { + /* Translate internal CRB initialization + * address to PCI bus address + */ + off = qla82xx_decode_crb_addr((unsigned long)buf[i].addr) + + QLA82XX_PCI_CRBSPACE; + /* Not all CRB addr/value pair to be written, + * some of them are skipped + */ + + /* skipping cold reboot MAGIC */ + if (off == QLA82XX_CAM_RAM(0x1fc)) + continue; + + /* do not reset PCI */ + if (off == (ROMUSB_GLB + 0xbc)) + continue; + + /* skip core clock, so that firmware can increase the clock */ + if (off == (ROMUSB_GLB + 0xc8)) + continue; + + /* skip the function enable register */ + if (off == QLA82XX_PCIE_REG(PCIE_SETUP_FUNCTION)) + continue; + + if (off == QLA82XX_PCIE_REG(PCIE_SETUP_FUNCTION2)) + continue; + + if ((off & 0x0ff00000) == QLA82XX_CRB_SMB) + continue; + + if ((off & 0x0ff00000) == QLA82XX_CRB_DDR_NET) + continue; + + if (off == ADDR_ERROR) { + qla_printk(KERN_WARNING, ha, + "%s: [ERROR] Unknown addr: 0x%08lx\n", + QLA2XXX_DRIVER_NAME, buf[i].addr); + continue; + } + + if (off == (QLA82XX_CRB_PEG_NET_1 + 0x18)) { + if (!QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) + buf[i].data = 0x1020; + } + + qla82xx_wr_32(ha, off, buf[i].data); + + /* ISP requires much bigger delay to settle down, + * else crb_window returns 0xffffffff + */ + if (off == QLA82XX_ROMUSB_GLB_SW_RESET) + msleep(1000); + + /* ISP requires millisec delay between + * successive CRB register updation + */ + msleep(1); + } + + kfree(buf); + + /* Resetting the data and instruction cache */ + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_D+0xec, 0x1e); + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_D+0x4c, 8); + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_I+0x4c, 8); + + /* Clear all protocol processing engines */ + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0+0x8, 0); + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0+0xc, 0); + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_1+0x8, 0); + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_1+0xc, 0); + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_2+0x8, 0); + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_2+0xc, 0); + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_3+0x8, 0); + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_3+0xc, 0); + return 0; +} + +int qla82xx_check_for_bad_spd(struct qla_hw_data *ha) +{ + u32 val = 0; + val = qla82xx_rd_32(ha, BOOT_LOADER_DIMM_STATUS); + val &= QLA82XX_BOOT_LOADER_MN_ISSUE; + if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) { + qla_printk(KERN_INFO, ha, + "Memory DIMM SPD not programmed. " + " Assumed valid.\n"); + return 1; + } else if (val) { + qla_printk(KERN_INFO, ha, + "Memory DIMM type incorrect.Info:%08X.\n", val); + return 2; + } + return 0; +} + +int +qla82xx_fw_load_from_flash(struct qla_hw_data *ha) +{ + int i; + long size = 0; + long flashaddr = BOOTLD_START, memaddr = BOOTLD_START; + u64 data; + u32 high, low; + size = (IMAGE_START - BOOTLD_START) / 8; + + for (i = 0; i < size; i++) { + if ((qla82xx_rom_fast_read(ha, flashaddr, (int *)&low)) || + (qla82xx_rom_fast_read(ha, flashaddr + 4, (int *)&high))) { + return -1; + } + data = ((u64)high << 32) | low ; + qla82xx_pci_mem_write_2M(ha, memaddr, &data, 8); + flashaddr += 8; + memaddr += 8; + + if (i % 0x1000 == 0) + msleep(1); + } + udelay(100); + read_lock(&ha->hw_lock); + if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x18, 0x1020); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0x80001e); + } else { + qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0x80001d); + } + read_unlock(&ha->hw_lock); + return 0; +} + +int +qla82xx_pci_mem_read_2M(struct qla_hw_data *ha, + u64 off, void *data, int size) +{ + int i, j = 0, k, start, end, loop, sz[2], off0[2]; + int shift_amount; + uint32_t temp; + uint64_t off8, val, mem_crb, word[2] = {0, 0}; + + /* + * If not MN, go check for MS or invalid. + */ + + if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) + mem_crb = QLA82XX_CRB_QDR_NET; + else { + mem_crb = QLA82XX_CRB_DDR_NET; + if (qla82xx_pci_mem_bound_check(ha, off, size) == 0) + return qla82xx_pci_mem_read_direct(ha, + off, data, size); + } + + if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { + off8 = off & 0xfffffff0; + off0[0] = off & 0xf; + sz[0] = (size < (16 - off0[0])) ? size : (16 - off0[0]); + shift_amount = 4; + } else { + off8 = off & 0xfffffff8; + off0[0] = off & 0x7; + sz[0] = (size < (8 - off0[0])) ? size : (8 - off0[0]); + shift_amount = 4; + } + loop = ((off0[0] + size - 1) >> shift_amount) + 1; + off0[1] = 0; + sz[1] = size - sz[0]; + + /* + * don't lock here - write_wx gets the lock if each time + * write_lock_irqsave(&adapter->adapter_lock, flags); + * netxen_nic_pci_change_crbwindow_128M(adapter, 0); + */ + + for (i = 0; i < loop; i++) { + temp = off8 + (i << shift_amount); + qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_LO, temp); + temp = 0; + qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_HI, temp); + temp = MIU_TA_CTL_ENABLE; + qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); + temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE; + qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); + + for (j = 0; j < MAX_CTL_CHECK; j++) { + temp = qla82xx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); + if ((temp & MIU_TA_CTL_BUSY) == 0) + break; + } + + if (j >= MAX_CTL_CHECK) { + if (printk_ratelimit()) + dev_err(&ha->pdev->dev, + "failed to read through agent\n"); + break; + } + + start = off0[i] >> 2; + end = (off0[i] + sz[i] - 1) >> 2; + for (k = start; k <= end; k++) { + temp = qla82xx_rd_32(ha, + mem_crb + MIU_TEST_AGT_RDDATA(k)); + word[i] |= ((uint64_t)temp << (32 * (k & 1))); + } + } + + /* + * netxen_nic_pci_change_crbwindow_128M(adapter, 1); + * write_unlock_irqrestore(&adapter->adapter_lock, flags); + */ + + if (j >= MAX_CTL_CHECK) + return -1; + + if ((off0[0] & 7) == 0) { + val = word[0]; + } else { + val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) | + ((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8)); + } + + switch (size) { + case 1: + *(uint8_t *)data = val; + break; + case 2: + *(uint16_t *)data = val; + break; + case 4: + *(uint32_t *)data = val; + break; + case 8: + *(uint64_t *)data = val; + break; + } + return 0; +} + +int +qla82xx_pci_mem_write_2M(struct qla_hw_data *ha, + u64 off, void *data, int size) +{ + int i, j, ret = 0, loop, sz[2], off0; + int scale, shift_amount, p3p, startword; + uint32_t temp; + uint64_t off8, mem_crb, tmpw, word[2] = {0, 0}; + + /* + * If not MN, go check for MS or invalid. + */ + if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) + mem_crb = QLA82XX_CRB_QDR_NET; + else { + mem_crb = QLA82XX_CRB_DDR_NET; + if (qla82xx_pci_mem_bound_check(ha, off, size) == 0) + return qla82xx_pci_mem_write_direct(ha, + off, data, size); + } + + off0 = off & 0x7; + sz[0] = (size < (8 - off0)) ? size : (8 - off0); + sz[1] = size - sz[0]; + + if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { + off8 = off & 0xfffffff0; + loop = (((off & 0xf) + size - 1) >> 4) + 1; + shift_amount = 4; + scale = 2; + p3p = 1; + startword = (off & 0xf)/8; + } else { + off8 = off & 0xfffffff8; + loop = ((off0 + size - 1) >> 3) + 1; + shift_amount = 3; + scale = 1; + p3p = 0; + startword = 0; + } + + if (p3p || (size != 8) || (off0 != 0)) { + for (i = 0; i < loop; i++) { + if (qla82xx_pci_mem_read_2M(ha, off8 + + (i << shift_amount), &word[i * scale], 8)) + return -1; + } + } + + switch (size) { + case 1: + tmpw = *((uint8_t *)data); + break; + case 2: + tmpw = *((uint16_t *)data); + break; + case 4: + tmpw = *((uint32_t *)data); + break; + case 8: + default: + tmpw = *((uint64_t *)data); + break; + } + + if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { + if (sz[0] == 8) { + word[startword] = tmpw; + } else { + word[startword] &= + ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8)); + word[startword] |= tmpw << (off0 * 8); + } + if (sz[1] != 0) { + word[startword+1] &= ~(~0ULL << (sz[1] * 8)); + word[startword+1] |= tmpw >> (sz[0] * 8); + } + } else { + word[startword] &= ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8)); + word[startword] |= tmpw << (off0 * 8); + + if (loop == 2) { + word[1] &= ~(~0ULL << (sz[1] * 8)); + word[1] |= tmpw >> (sz[0] * 8); + } + } + + /* + * don't lock here - write_wx gets the lock if each time + * write_lock_irqsave(&adapter->adapter_lock, flags); + * netxen_nic_pci_change_crbwindow_128M(adapter, 0); + */ + for (i = 0; i < loop; i++) { + temp = off8 + (i << shift_amount); + qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_LO, temp); + temp = 0; + qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_HI, temp); + temp = word[i * scale] & 0xffffffff; + qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_LO, temp); + temp = (word[i * scale] >> 32) & 0xffffffff; + qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_HI, temp); + if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { + temp = word[i*scale + 1] & 0xffffffff; + qla82xx_wr_32(ha, mem_crb + + MIU_TEST_AGT_WRDATA_UPPER_LO, temp); + temp = (word[i*scale + 1] >> 32) & 0xffffffff; + qla82xx_wr_32(ha, mem_crb + + MIU_TEST_AGT_WRDATA_UPPER_HI, temp); + } + + temp = MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; + qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); + temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; + qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); + + for (j = 0; j < MAX_CTL_CHECK; j++) { + temp = qla82xx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); + if ((temp & MIU_TA_CTL_BUSY) == 0) + break; + } + + if (j >= MAX_CTL_CHECK) { + if (printk_ratelimit()) + dev_err(&ha->pdev->dev, + "failed to write through agent\n"); + ret = -1; + break; + } + } + + return ret; +} + +/* PCI related functions */ +char * +qla82xx_pci_info_str(struct scsi_qla_host *vha, char *str) +{ + int pcie_reg; + struct qla_hw_data *ha = vha->hw; + char lwstr[6]; + uint16_t lnk; + + pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP); + pci_read_config_word(ha->pdev, pcie_reg + PCI_EXP_LNKSTA, &lnk); + ha->link_width = (lnk >> 4) & 0x3f; + + strcpy(str, "PCIe ("); + strcat(str, "2.5Gb/s "); + snprintf(lwstr, sizeof(lwstr), "x%d)", ha->link_width); + strcat(str, lwstr); + return str; +} + +int qla82xx_pci_region_offset(struct pci_dev *pdev, int region) +{ + unsigned long val = 0; + u32 control; + + switch (region) { + case 0: + val = 0; + break; + case 1: + pci_read_config_dword(pdev, QLA82XX_PCI_REG_MSIX_TBL, &control); + val = control + QLA82XX_MSIX_TBL_SPACE; + break; + } + return val; +} + +int qla82xx_pci_region_len(struct pci_dev *pdev, int region) +{ + unsigned long val = 0; + u32 control; + switch (region) { + case 0: + pci_read_config_dword(pdev, QLA82XX_PCI_REG_MSIX_TBL, &control); + val = control; + break; + case 1: + val = pci_resource_len(pdev, 0) - + qla82xx_pci_region_offset(pdev, 1); + break; + } + return val; +} + +int +qla82xx_iospace_config(struct qla_hw_data *ha) +{ + uint32_t len = 0; + + if (pci_request_regions(ha->pdev, QLA2XXX_DRIVER_NAME)) { + qla_printk(KERN_WARNING, ha, + "Failed to reserve selected regions (%s)\n", + pci_name(ha->pdev)); + goto iospace_error_exit; + } + + /* Use MMIO operations for all accesses. */ + if (!(pci_resource_flags(ha->pdev, 0) & IORESOURCE_MEM)) { + qla_printk(KERN_ERR, ha, + "region #0 not an MMIO resource (%s), aborting\n", + pci_name(ha->pdev)); + goto iospace_error_exit; + } + + len = pci_resource_len(ha->pdev, 0); + ha->nx_pcibase = + (unsigned long)ioremap(pci_resource_start(ha->pdev, 0), len); + if (!ha->nx_pcibase) { + qla_printk(KERN_ERR, ha, + "cannot remap pcibase MMIO (%s), aborting\n", + pci_name(ha->pdev)); + pci_release_regions(ha->pdev); + goto iospace_error_exit; + } + + /* Mapping of IO base pointer */ + ha->iobase = (device_reg_t __iomem *)((uint8_t *)ha->nx_pcibase + + 0xbc000 + (ha->pdev->devfn << 11)); + + if (!ql2xdbwr) { + ha->nxdb_wr_ptr = + (unsigned long)ioremap((pci_resource_start(ha->pdev, 4) + + (ha->pdev->devfn << 12)), 4); + if (!ha->nxdb_wr_ptr) { + qla_printk(KERN_ERR, ha, + "cannot remap MMIO (%s), aborting\n", + pci_name(ha->pdev)); + pci_release_regions(ha->pdev); + goto iospace_error_exit; + } + + /* Mapping of IO base pointer, + * door bell read and write pointer + */ + ha->nxdb_rd_ptr = (uint8_t *) ha->nx_pcibase + (512 * 1024) + + (ha->pdev->devfn * 8); + } else { + ha->nxdb_wr_ptr = (ha->pdev->devfn == 6 ? + QLA82XX_CAMRAM_DB1 : + QLA82XX_CAMRAM_DB2); + } + + ha->max_req_queues = ha->max_rsp_queues = 1; + ha->msix_count = ha->max_rsp_queues + 1; + return 0; + +iospace_error_exit: + return -ENOMEM; +} + +/* GS related functions */ + +/* Initialization related functions */ + +/** + * qla82xx_pci_config() - Setup ISP82xx PCI configuration registers. + * @ha: HA context + * + * Returns 0 on success. +*/ +int +qla82xx_pci_config(scsi_qla_host_t *vha) +{ + struct qla_hw_data *ha = vha->hw; + int ret; + + pci_set_master(ha->pdev); + ret = pci_set_mwi(ha->pdev); + ha->chip_revision = ha->pdev->revision; + return 0; +} + +/** + * qla82xx_reset_chip() - Setup ISP82xx PCI configuration registers. + * @ha: HA context + * + * Returns 0 on success. + */ +void +qla82xx_reset_chip(scsi_qla_host_t *vha) +{ + struct qla_hw_data *ha = vha->hw; + ha->isp_ops->disable_intrs(ha); +} + +void qla82xx_config_rings(struct scsi_qla_host *vha) +{ + struct qla_hw_data *ha = vha->hw; + struct device_reg_82xx __iomem *reg = &ha->iobase->isp82; + struct init_cb_81xx *icb; + struct req_que *req = ha->req_q_map[0]; + struct rsp_que *rsp = ha->rsp_q_map[0]; + + /* Setup ring parameters in initialization control block. */ + icb = (struct init_cb_81xx *)ha->init_cb; + icb->request_q_outpointer = __constant_cpu_to_le16(0); + icb->response_q_inpointer = __constant_cpu_to_le16(0); + icb->request_q_length = cpu_to_le16(req->length); + icb->response_q_length = cpu_to_le16(rsp->length); + icb->request_q_address[0] = cpu_to_le32(LSD(req->dma)); + icb->request_q_address[1] = cpu_to_le32(MSD(req->dma)); + icb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma)); + icb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma)); + + icb->version = 1; + icb->frame_payload_size = 2112; + icb->execution_throttle = 8; + icb->exchange_count = 128; + icb->login_retry_count = 8; + + WRT_REG_DWORD((unsigned long __iomem *)®->req_q_out[0], 0); + WRT_REG_DWORD((unsigned long __iomem *)®->rsp_q_in[0], 0); + WRT_REG_DWORD((unsigned long __iomem *)®->rsp_q_out[0], 0); +} + +int qla82xx_fw_load_from_blob(struct qla_hw_data *ha) +{ + u64 *ptr64; + u32 i, flashaddr, size; + __le64 data; + + size = (IMAGE_START - BOOTLD_START) / 8; + + ptr64 = (u64 *)&ha->hablob->fw->data[BOOTLD_START]; + flashaddr = BOOTLD_START; + + for (i = 0; i < size; i++) { + data = cpu_to_le64(ptr64[i]); + qla82xx_pci_mem_write_2M(ha, flashaddr, &data, 8); + flashaddr += 8; + } + + size = *(u32 *)&ha->hablob->fw->data[FW_SIZE_OFFSET]; + size = (__force u32)cpu_to_le32(size) / 8; + ptr64 = (u64 *)&ha->hablob->fw->data[IMAGE_START]; + flashaddr = FLASH_ADDR_START; + + for (i = 0; i < size; i++) { + data = cpu_to_le64(ptr64[i]); + + if (qla82xx_pci_mem_write_2M(ha, flashaddr, &data, 8)) + return -EIO; + flashaddr += 8; + } + + /* Write a magic value to CAMRAM register + * at a specified offset to indicate + * that all data is written and + * ready for firmware to initialize. + */ + qla82xx_wr_32(ha, QLA82XX_CAM_RAM(0x1fc), 0x12345678); + + if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { + qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x18, 0x1020); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0x80001e); + } else + qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0x80001d); + return 0; +} + +int qla82xx_check_cmdpeg_state(struct qla_hw_data *ha) +{ + u32 val = 0; + int retries = 60; + + do { + read_lock(&ha->hw_lock); + val = qla82xx_rd_32(ha, CRB_CMDPEG_STATE); + read_unlock(&ha->hw_lock); + + switch (val) { + case PHAN_INITIALIZE_COMPLETE: + case PHAN_INITIALIZE_ACK: + return QLA_SUCCESS; + case PHAN_INITIALIZE_FAILED: + break; + default: + break; + } + qla_printk(KERN_WARNING, ha, + "CRB_CMDPEG_STATE: 0x%x and retries: 0x%x\n", + val, retries); + + msleep(500); + + } while (--retries); + + qla_printk(KERN_INFO, ha, + "Cmd Peg initialization failed: 0x%x.\n", val); + + qla82xx_check_for_bad_spd(ha); + val = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_PEGTUNE_DONE); + read_lock(&ha->hw_lock); + qla82xx_wr_32(ha, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED); + read_unlock(&ha->hw_lock); + return QLA_FUNCTION_FAILED; +} + +int qla82xx_check_rcvpeg_state(struct qla_hw_data *ha) +{ + u32 val = 0; + int retries = 60; + + do { + read_lock(&ha->hw_lock); + val = qla82xx_rd_32(ha, CRB_RCVPEG_STATE); + read_unlock(&ha->hw_lock); + + switch (val) { + case PHAN_INITIALIZE_COMPLETE: + case PHAN_INITIALIZE_ACK: + return QLA_SUCCESS; + case PHAN_INITIALIZE_FAILED: + break; + default: + break; + } + + qla_printk(KERN_WARNING, ha, + "CRB_RCVPEG_STATE: 0x%x and retries: 0x%x\n", + val, retries); + + msleep(500); + + } while (--retries); + + qla_printk(KERN_INFO, ha, + "Rcv Peg initialization failed: 0x%x.\n", val); + read_lock(&ha->hw_lock); + qla82xx_wr_32(ha, CRB_RCVPEG_STATE, PHAN_INITIALIZE_FAILED); + read_unlock(&ha->hw_lock); + return QLA_FUNCTION_FAILED; +} + +/* ISR related functions */ +uint32_t qla82xx_isr_int_target_mask_enable[8] = { + ISR_INT_TARGET_MASK, ISR_INT_TARGET_MASK_F1, + ISR_INT_TARGET_MASK_F2, ISR_INT_TARGET_MASK_F3, + ISR_INT_TARGET_MASK_F4, ISR_INT_TARGET_MASK_F5, + ISR_INT_TARGET_MASK_F7, ISR_INT_TARGET_MASK_F7 +}; + +uint32_t qla82xx_isr_int_target_status[8] = { + ISR_INT_TARGET_STATUS, ISR_INT_TARGET_STATUS_F1, + ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3, + ISR_INT_TARGET_STATUS_F4, ISR_INT_TARGET_STATUS_F5, + ISR_INT_TARGET_STATUS_F7, ISR_INT_TARGET_STATUS_F7 +}; + +static struct qla82xx_legacy_intr_set legacy_intr[] = \ + QLA82XX_LEGACY_INTR_CONFIG; + +/* + * qla82xx_mbx_completion() - Process mailbox command completions. + * @ha: SCSI driver HA context + * @mb0: Mailbox0 register + */ +void +qla82xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0) +{ + uint16_t cnt; + uint16_t __iomem *wptr; + struct qla_hw_data *ha = vha->hw; + struct device_reg_82xx __iomem *reg = &ha->iobase->isp82; + wptr = (uint16_t __iomem *)®->mailbox_out[1]; + + /* Load return mailbox registers. */ + ha->flags.mbox_int = 1; + ha->mailbox_out[0] = mb0; + + for (cnt = 1; cnt < ha->mbx_count; cnt++) { + ha->mailbox_out[cnt] = RD_REG_WORD(wptr); + wptr++; + } + + if (ha->mcp) { + DEBUG3_11(printk(KERN_INFO "%s(%ld): " + "Got mailbox completion. cmd=%x.\n", + __func__, vha->host_no, ha->mcp->mb[0])); + } else { + qla_printk(KERN_INFO, ha, + "%s(%ld): MBX pointer ERROR!\n", + __func__, vha->host_no); + } +} + +/* + * qla82xx_intr_handler() - Process interrupts for the ISP23xx and ISP63xx. + * @irq: + * @dev_id: SCSI driver HA context + * @regs: + * + * Called by system whenever the host adapter generates an interrupt. + * + * Returns handled flag. + */ +irqreturn_t +qla82xx_intr_handler(int irq, void *dev_id) +{ + scsi_qla_host_t *vha; + struct qla_hw_data *ha; + struct rsp_que *rsp; + struct device_reg_82xx __iomem *reg; + int status = 0, status1 = 0; + unsigned long flags; + unsigned long iter; + uint32_t stat; + uint16_t mb[4]; + + rsp = (struct rsp_que *) dev_id; + if (!rsp) { + printk(KERN_INFO + "%s(): NULL response queue pointer\n", __func__); + return IRQ_NONE; + } + ha = rsp->hw; + + if (!ha->flags.msi_enabled) { + status = qla82xx_rd_32(ha, ISR_INT_VECTOR); + if (!(status & ha->nx_legacy_intr.int_vec_bit)) + return IRQ_NONE; + + status1 = qla82xx_rd_32(ha, ISR_INT_STATE_REG); + if (!ISR_IS_LEGACY_INTR_TRIGGERED(status1)) + return IRQ_NONE; + } + + /* clear the interrupt */ + qla82xx_wr_32(ha, ha->nx_legacy_intr.tgt_status_reg, 0xffffffff); + + /* read twice to ensure write is flushed */ + qla82xx_rd_32(ha, ISR_INT_VECTOR); + qla82xx_rd_32(ha, ISR_INT_VECTOR); + + reg = &ha->iobase->isp82; + + spin_lock_irqsave(&ha->hardware_lock, flags); + vha = pci_get_drvdata(ha->pdev); + for (iter = 1; iter--; ) { + + if (RD_REG_DWORD(®->host_int)) { + stat = RD_REG_DWORD(®->host_status); + if (stat & HSRX_RISC_PAUSED) { + if (pci_channel_offline(ha->pdev)) + break; + + qla_printk(KERN_INFO, ha, "RISC paused\n"); + set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); + qla2xxx_wake_dpc(vha); + break; + } else if ((stat & HSRX_RISC_INT) == 0) + break; + + switch (stat & 0xff) { + case 0x1: + case 0x2: + case 0x10: + case 0x11: + qla82xx_mbx_completion(vha, MSW(stat)); + status |= MBX_INTERRUPT; + break; + case 0x12: + mb[0] = MSW(stat); + mb[1] = RD_REG_WORD(®->mailbox_out[1]); + mb[2] = RD_REG_WORD(®->mailbox_out[2]); + mb[3] = RD_REG_WORD(®->mailbox_out[3]); + qla2x00_async_event(vha, rsp, mb); + break; + case 0x13: + qla24xx_process_response_queue(vha, rsp); + break; + default: + DEBUG2(printk("scsi(%ld): " + " Unrecognized interrupt type (%d).\n", + vha->host_no, stat & 0xff)); + break; + } + } + WRT_REG_DWORD(®->host_int, 0); + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); + if (!ha->flags.msi_enabled) + qla82xx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0xfbff); + +#ifdef QL_DEBUG_LEVEL_17 + if (!irq && ha->flags.eeh_busy) + qla_printk(KERN_WARNING, ha, + "isr: status %x, cmd_flags %lx, mbox_int %x, stat %x\n", + status, ha->mbx_cmd_flags, ha->flags.mbox_int, stat); +#endif + + if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && + (status & MBX_INTERRUPT) && ha->flags.mbox_int) { + set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); + complete(&ha->mbx_intr_comp); + } + return IRQ_HANDLED; +} + +irqreturn_t +qla82xx_msix_default(int irq, void *dev_id) +{ + scsi_qla_host_t *vha; + struct qla_hw_data *ha; + struct rsp_que *rsp; + struct device_reg_82xx __iomem *reg; + int status = 0; + unsigned long flags; + uint32_t stat; + uint16_t mb[4]; + + rsp = (struct rsp_que *) dev_id; + if (!rsp) { + printk(KERN_INFO + "%s(): NULL response queue pointer\n", __func__); + return IRQ_NONE; + } + ha = rsp->hw; + + reg = &ha->iobase->isp82; + + spin_lock_irqsave(&ha->hardware_lock, flags); + vha = pci_get_drvdata(ha->pdev); + do { + if (RD_REG_DWORD(®->host_int)) { + stat = RD_REG_DWORD(®->host_status); + if (stat & HSRX_RISC_PAUSED) { + if (pci_channel_offline(ha->pdev)) + break; + + qla_printk(KERN_INFO, ha, "RISC paused\n"); + set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); + qla2xxx_wake_dpc(vha); + break; + } else if ((stat & HSRX_RISC_INT) == 0) + break; + + switch (stat & 0xff) { + case 0x1: + case 0x2: + case 0x10: + case 0x11: + qla82xx_mbx_completion(vha, MSW(stat)); + status |= MBX_INTERRUPT; + break; + case 0x12: + mb[0] = MSW(stat); + mb[1] = RD_REG_WORD(®->mailbox_out[1]); + mb[2] = RD_REG_WORD(®->mailbox_out[2]); + mb[3] = RD_REG_WORD(®->mailbox_out[3]); + qla2x00_async_event(vha, rsp, mb); + break; + case 0x13: + qla24xx_process_response_queue(vha, rsp); + break; + default: + DEBUG2(printk("scsi(%ld): " + " Unrecognized interrupt type (%d).\n", + vha->host_no, stat & 0xff)); + break; + } + } + WRT_REG_DWORD(®->host_int, 0); + } while (0); + + spin_unlock_irqrestore(&ha->hardware_lock, flags); + +#ifdef QL_DEBUG_LEVEL_17 + if (!irq && ha->flags.eeh_busy) + qla_printk(KERN_WARNING, ha, + "isr: status %x, cmd_flags %lx, mbox_int %x, stat %x\n", + status, ha->mbx_cmd_flags, ha->flags.mbox_int, stat); +#endif + + if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && + (status & MBX_INTERRUPT) && ha->flags.mbox_int) { + set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); + complete(&ha->mbx_intr_comp); + } + return IRQ_HANDLED; +} + +irqreturn_t +qla82xx_msix_rsp_q(int irq, void *dev_id) +{ + scsi_qla_host_t *vha; + struct qla_hw_data *ha; + struct rsp_que *rsp; + struct device_reg_82xx __iomem *reg; + + rsp = (struct rsp_que *) dev_id; + if (!rsp) { + printk(KERN_INFO + "%s(): NULL response queue pointer\n", __func__); + return IRQ_NONE; + } + + ha = rsp->hw; + reg = &ha->iobase->isp82; + spin_lock_irq(&ha->hardware_lock); + vha = pci_get_drvdata(ha->pdev); + qla24xx_process_response_queue(vha, rsp); + WRT_REG_DWORD(®->host_int, 0); + spin_unlock_irq(&ha->hardware_lock); + return IRQ_HANDLED; +} + +void +qla82xx_poll(int irq, void *dev_id) +{ + scsi_qla_host_t *vha; + struct qla_hw_data *ha; + struct rsp_que *rsp; + struct device_reg_82xx __iomem *reg; + int status = 0; + uint32_t stat; + uint16_t mb[4]; + unsigned long flags; + + rsp = (struct rsp_que *) dev_id; + if (!rsp) { + printk(KERN_INFO + "%s(): NULL response queue pointer\n", __func__); + return; + } + ha = rsp->hw; + + reg = &ha->iobase->isp82; + spin_lock_irqsave(&ha->hardware_lock, flags); + vha = pci_get_drvdata(ha->pdev); + + if (RD_REG_DWORD(®->host_int)) { + stat = RD_REG_DWORD(®->host_status); + switch (stat & 0xff) { + case 0x1: + case 0x2: + case 0x10: + case 0x11: + qla82xx_mbx_completion(vha, MSW(stat)); + status |= MBX_INTERRUPT; + break; + case 0x12: + mb[0] = MSW(stat); + mb[1] = RD_REG_WORD(®->mailbox_out[1]); + mb[2] = RD_REG_WORD(®->mailbox_out[2]); + mb[3] = RD_REG_WORD(®->mailbox_out[3]); + qla2x00_async_event(vha, rsp, mb); + break; + case 0x13: + qla24xx_process_response_queue(vha, rsp); + break; + default: + DEBUG2(printk("scsi(%ld): Unrecognized interrupt type " + "(%d).\n", + vha->host_no, stat & 0xff)); + break; + } + } + WRT_REG_DWORD(®->host_int, 0); + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + +void +qla82xx_enable_intrs(struct qla_hw_data *ha) +{ + scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); + qla82xx_mbx_intr_enable(vha); + spin_lock_irq(&ha->hardware_lock); + qla82xx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0xfbff); + spin_unlock_irq(&ha->hardware_lock); + ha->interrupts_on = 1; +} + +void +qla82xx_disable_intrs(struct qla_hw_data *ha) +{ + scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); + qla82xx_mbx_intr_disable(vha); + spin_lock_irq(&ha->hardware_lock); + qla82xx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0x0400); + spin_unlock_irq(&ha->hardware_lock); + ha->interrupts_on = 0; +} + +void qla82xx_init_flags(struct qla_hw_data *ha) +{ + struct qla82xx_legacy_intr_set *nx_legacy_intr; + + /* ISP 8021 initializations */ + rwlock_init(&ha->hw_lock); + ha->qdr_sn_window = -1; + ha->ddr_mn_window = -1; + ha->curr_window = 255; + ha->portnum = PCI_FUNC(ha->pdev->devfn); + nx_legacy_intr = &legacy_intr[ha->portnum]; + ha->nx_legacy_intr.int_vec_bit = nx_legacy_intr->int_vec_bit; + ha->nx_legacy_intr.tgt_status_reg = nx_legacy_intr->tgt_status_reg; + ha->nx_legacy_intr.tgt_mask_reg = nx_legacy_intr->tgt_mask_reg; + ha->nx_legacy_intr.pci_int_reg = nx_legacy_intr->pci_int_reg; +} + +static inline void +qla82xx_set_drv_active(scsi_qla_host_t *vha) +{ + uint32_t drv_active; + struct qla_hw_data *ha = vha->hw; + + drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); + + /* If reset value is all FF's, initialize DRV_ACTIVE */ + if (drv_active == 0xffffffff) { + qla82xx_wr_32(ha, QLA82XX_CRB_DRV_ACTIVE, 0); + drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); + } + drv_active |= (1 << (ha->portnum * 4)); + qla82xx_wr_32(ha, QLA82XX_CRB_DRV_ACTIVE, drv_active); +} + +inline void +qla82xx_clear_drv_active(struct qla_hw_data *ha) +{ + uint32_t drv_active; + + drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); + drv_active &= ~(1 << (ha->portnum * 4)); + qla82xx_wr_32(ha, QLA82XX_CRB_DRV_ACTIVE, drv_active); +} + +static inline int +qla82xx_need_reset(struct qla_hw_data *ha) +{ + uint32_t drv_state; + int rval; + + drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + rval = drv_state & (1 << (ha->portnum * 4)); + return rval; +} + +static inline void +qla82xx_set_rst_ready(struct qla_hw_data *ha) +{ + uint32_t drv_state; + scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); + + drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + + /* If reset value is all FF's, initialize DRV_STATE */ + if (drv_state == 0xffffffff) { + qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0); + drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + } + drv_state |= (QLA82XX_DRVST_RST_RDY << (ha->portnum * 4)); + qla_printk(KERN_INFO, ha, + "%s(%ld):drv_state = 0x%x\n", + __func__, vha->host_no, drv_state); + qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, drv_state); +} + +static inline void +qla82xx_clear_rst_ready(struct qla_hw_data *ha) +{ + uint32_t drv_state; + + drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + drv_state &= ~(QLA82XX_DRVST_RST_RDY << (ha->portnum * 4)); + qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, drv_state); +} + +static inline void +qla82xx_set_qsnt_ready(struct qla_hw_data *ha) +{ + uint32_t qsnt_state; + + qsnt_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + qsnt_state |= (QLA82XX_DRVST_QSNT_RDY << (ha->portnum * 4)); + qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, qsnt_state); +} + +int qla82xx_load_fw(scsi_qla_host_t *vha) +{ + int rst; + struct fw_blob *blob; + struct qla_hw_data *ha = vha->hw; + + /* Put both the PEG CMD and RCV PEG to default state + * of 0 before resetting the hardware + */ + qla82xx_wr_32(ha, CRB_CMDPEG_STATE, 0); + qla82xx_wr_32(ha, CRB_RCVPEG_STATE, 0); + + if (qla82xx_pinit_from_rom(vha) != QLA_SUCCESS) { + qla_printk(KERN_ERR, ha, + "%s: Error during CRB Initialization\n", __func__); + return QLA_FUNCTION_FAILED; + } + udelay(500); + + /* Bring QM and CAMRAM out of reset */ + rst = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET); + rst &= ~((1 << 28) | (1 << 24)); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, rst); + + /* + * FW Load priority: + * 1) Operational firmware residing in flash. + * 2) Firmware via request-firmware interface (.bin file). + */ + if (ql2xfwloadbin == 2) + goto try_blob_fw; + + qla_printk(KERN_INFO, ha, + "Attempting to load firmware from flash\n"); + + if (qla82xx_fw_load_from_flash(ha) == QLA_SUCCESS) { + qla_printk(KERN_ERR, ha, + "Firmware loaded successfully from flash\n"); + return QLA_SUCCESS; + } +try_blob_fw: + qla_printk(KERN_INFO, ha, + "Attempting to load firmware from blob\n"); + + /* Load firmware blob. */ + blob = ha->hablob = qla2x00_request_firmware(vha); + if (!blob) { + qla_printk(KERN_ERR, ha, + "Firmware image not present.\n"); + goto fw_load_failed; + } + + if (qla82xx_fw_load_from_blob(ha) == QLA_SUCCESS) { + qla_printk(KERN_ERR, ha, + "%s: Firmware loaded successfully " + " from binary blob\n", __func__); + return QLA_SUCCESS; + } else { + qla_printk(KERN_ERR, ha, + "Firmware load failed from binary blob\n"); + blob->fw = NULL; + blob = NULL; + goto fw_load_failed; + } + return QLA_SUCCESS; + +fw_load_failed: + return QLA_FUNCTION_FAILED; +} + +static int +qla82xx_start_firmware(scsi_qla_host_t *vha) +{ + int pcie_cap; + uint16_t lnk; + struct qla_hw_data *ha = vha->hw; + + /* scrub dma mask expansion register */ + qla82xx_wr_32(ha, CRB_DMA_SHIFT, 0x55555555); + + /* Overwrite stale initialization register values */ + qla82xx_wr_32(ha, QLA82XX_PEG_HALT_STATUS1, 0); + qla82xx_wr_32(ha, QLA82XX_PEG_HALT_STATUS2, 0); + + if (qla82xx_load_fw(vha) != QLA_SUCCESS) { + qla_printk(KERN_INFO, ha, + "%s: Error trying to start fw!\n", __func__); + return QLA_FUNCTION_FAILED; + } + + /* Handshake with the card before we register the devices. */ + if (qla82xx_check_cmdpeg_state(ha) != QLA_SUCCESS) { + qla_printk(KERN_INFO, ha, + "%s: Error during card handshake!\n", __func__); + return QLA_FUNCTION_FAILED; + } + + /* Negotiated Link width */ + pcie_cap = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP); + pci_read_config_word(ha->pdev, pcie_cap + PCI_EXP_LNKSTA, &lnk); + ha->link_width = (lnk >> 4) & 0x3f; + + /* Synchronize with Receive peg */ + return qla82xx_check_rcvpeg_state(ha); +} + +static inline int +qla2xx_build_scsi_type_6_iocbs(srb_t *sp, struct cmd_type_6 *cmd_pkt, + uint16_t tot_dsds) +{ + uint32_t *cur_dsd = NULL; + scsi_qla_host_t *vha; + struct qla_hw_data *ha; + struct scsi_cmnd *cmd; + struct scatterlist *cur_seg; + uint32_t *dsd_seg; + void *next_dsd; + uint8_t avail_dsds; + uint8_t first_iocb = 1; + uint32_t dsd_list_len; + struct dsd_dma *dsd_ptr; + struct ct6_dsd *ctx; + + cmd = sp->cmd; + + /* Update entry type to indicate Command Type 3 IOCB */ + *((uint32_t *)(&cmd_pkt->entry_type)) = + __constant_cpu_to_le32(COMMAND_TYPE_6); + + /* No data transfer */ + if (!scsi_bufflen(cmd) || cmd->sc_data_direction == DMA_NONE) { + cmd_pkt->byte_count = __constant_cpu_to_le32(0); + return 0; + } + + vha = sp->fcport->vha; + ha = vha->hw; + + /* Set transfer direction */ + if (cmd->sc_data_direction == DMA_TO_DEVICE) { + cmd_pkt->control_flags = + __constant_cpu_to_le16(CF_WRITE_DATA); + ha->qla_stats.output_bytes += scsi_bufflen(cmd); + } else if (cmd->sc_data_direction == DMA_FROM_DEVICE) { + cmd_pkt->control_flags = + __constant_cpu_to_le16(CF_READ_DATA); + ha->qla_stats.input_bytes += scsi_bufflen(cmd); + } + + cur_seg = scsi_sglist(cmd); + ctx = sp->ctx; + + while (tot_dsds) { + avail_dsds = (tot_dsds > QLA_DSDS_PER_IOCB) ? + QLA_DSDS_PER_IOCB : tot_dsds; + tot_dsds -= avail_dsds; + dsd_list_len = (avail_dsds + 1) * QLA_DSD_SIZE; + + dsd_ptr = list_first_entry(&ha->gbl_dsd_list, + struct dsd_dma, list); + next_dsd = dsd_ptr->dsd_addr; + list_del(&dsd_ptr->list); + ha->gbl_dsd_avail--; + list_add_tail(&dsd_ptr->list, &ctx->dsd_list); + ctx->dsd_use_cnt++; + ha->gbl_dsd_inuse++; + + if (first_iocb) { + first_iocb = 0; + dsd_seg = (uint32_t *)&cmd_pkt->fcp_data_dseg_address; + *dsd_seg++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma)); + *dsd_seg++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma)); + *dsd_seg++ = dsd_list_len; + } else { + *cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = dsd_list_len; + } + cur_dsd = (uint32_t *)next_dsd; + while (avail_dsds) { + dma_addr_t sle_dma; + + sle_dma = sg_dma_address(cur_seg); + *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(sg_dma_len(cur_seg)); + cur_seg++; + avail_dsds--; + } + } + + /* Null termination */ + *cur_dsd++ = 0; + *cur_dsd++ = 0; + *cur_dsd++ = 0; + cmd_pkt->control_flags |= CF_DATA_SEG_DESCR_ENABLE; + return 0; +} + +/* + * qla82xx_calc_dsd_lists() - Determine number of DSD list required + * for Command Type 6. + * + * @dsds: number of data segment decriptors needed + * + * Returns the number of dsd list needed to store @dsds. + */ +inline uint16_t +qla82xx_calc_dsd_lists(uint16_t dsds) +{ + uint16_t dsd_lists = 0; + + dsd_lists = (dsds/QLA_DSDS_PER_IOCB); + if (dsds % QLA_DSDS_PER_IOCB) + dsd_lists++; + return dsd_lists; +} + +/* + * qla82xx_start_scsi() - Send a SCSI command to the ISP + * @sp: command to send to the ISP + * + * Returns non-zero if a failure occured, else zero. + */ +int +qla82xx_start_scsi(srb_t *sp) +{ + int ret, nseg; + unsigned long flags; + struct scsi_cmnd *cmd; + uint32_t *clr_ptr; + uint32_t index; + uint32_t handle; + uint16_t cnt; + uint16_t req_cnt; + uint16_t tot_dsds; + struct device_reg_82xx __iomem *reg; + uint32_t dbval; + uint32_t *fcp_dl; + uint8_t additional_cdb_len; + struct ct6_dsd *ctx; + struct scsi_qla_host *vha = sp->fcport->vha; + struct qla_hw_data *ha = vha->hw; + struct req_que *req = NULL; + struct rsp_que *rsp = NULL; + + /* Setup device pointers. */ + ret = 0; + reg = &ha->iobase->isp82; + cmd = sp->cmd; + req = vha->req; + rsp = ha->rsp_q_map[0]; + + /* So we know we haven't pci_map'ed anything yet */ + tot_dsds = 0; + + dbval = 0x04 | (ha->portnum << 5); + + /* Send marker if required */ + if (vha->marker_needed != 0) { + if (qla2x00_marker(vha, req, + rsp, 0, 0, MK_SYNC_ALL) != QLA_SUCCESS) + return QLA_FUNCTION_FAILED; + vha->marker_needed = 0; + } + + /* Acquire ring specific lock */ + spin_lock_irqsave(&ha->hardware_lock, flags); + + /* Check for room in outstanding command list. */ + handle = req->current_outstanding_cmd; + for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { + handle++; + if (handle == MAX_OUTSTANDING_COMMANDS) + handle = 1; + if (!req->outstanding_cmds[handle]) + break; + } + if (index == MAX_OUTSTANDING_COMMANDS) + goto queuing_error; + + /* Map the sg table so we have an accurate count of sg entries needed */ + if (scsi_sg_count(cmd)) { + nseg = dma_map_sg(&ha->pdev->dev, scsi_sglist(cmd), + scsi_sg_count(cmd), cmd->sc_data_direction); + if (unlikely(!nseg)) + goto queuing_error; + } else + nseg = 0; + + tot_dsds = nseg; + + if (tot_dsds > ql2xshiftctondsd) { + struct cmd_type_6 *cmd_pkt; + uint16_t more_dsd_lists = 0; + struct dsd_dma *dsd_ptr; + uint16_t i; + + more_dsd_lists = qla82xx_calc_dsd_lists(tot_dsds); + if ((more_dsd_lists + ha->gbl_dsd_inuse) >= NUM_DSD_CHAIN) + goto queuing_error; + + if (more_dsd_lists <= ha->gbl_dsd_avail) + goto sufficient_dsds; + else + more_dsd_lists -= ha->gbl_dsd_avail; + + for (i = 0; i < more_dsd_lists; i++) { + dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC); + if (!dsd_ptr) + goto queuing_error; + + dsd_ptr->dsd_addr = dma_pool_alloc(ha->dl_dma_pool, + GFP_ATOMIC, &dsd_ptr->dsd_list_dma); + if (!dsd_ptr->dsd_addr) { + kfree(dsd_ptr); + goto queuing_error; + } + list_add_tail(&dsd_ptr->list, &ha->gbl_dsd_list); + ha->gbl_dsd_avail++; + } + +sufficient_dsds: + req_cnt = 1; + + ctx = sp->ctx = mempool_alloc(ha->ctx_mempool, GFP_ATOMIC); + if (!sp->ctx) { + DEBUG(printk(KERN_INFO + "%s(%ld): failed to allocate" + " ctx.\n", __func__, vha->host_no)); + goto queuing_error; + } + memset(ctx, 0, sizeof(struct ct6_dsd)); + ctx->fcp_cmnd = dma_pool_alloc(ha->fcp_cmnd_dma_pool, + GFP_ATOMIC, &ctx->fcp_cmnd_dma); + if (!ctx->fcp_cmnd) { + DEBUG2_3(printk("%s(%ld): failed to allocate" + " fcp_cmnd.\n", __func__, vha->host_no)); + goto queuing_error_fcp_cmnd; + } + + /* Initialize the DSD list and dma handle */ + INIT_LIST_HEAD(&ctx->dsd_list); + ctx->dsd_use_cnt = 0; + + if (cmd->cmd_len > 16) { + additional_cdb_len = cmd->cmd_len - 16; + if ((cmd->cmd_len % 4) != 0) { + /* SCSI command bigger than 16 bytes must be + * multiple of 4 + */ + goto queuing_error_fcp_cmnd; + } + ctx->fcp_cmnd_len = 12 + cmd->cmd_len + 4; + } else { + additional_cdb_len = 0; + ctx->fcp_cmnd_len = 12 + 16 + 4; + } + + cmd_pkt = (struct cmd_type_6 *)req->ring_ptr; + cmd_pkt->handle = MAKE_HANDLE(req->id, handle); + + /* Zero out remaining portion of packet. */ + /* tagged queuing modifier -- default is TSK_SIMPLE (0). */ + clr_ptr = (uint32_t *)cmd_pkt + 2; + memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8); + cmd_pkt->dseg_count = cpu_to_le16(tot_dsds); + + /* Set NPORT-ID and LUN number*/ + cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id); + cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa; + cmd_pkt->port_id[1] = sp->fcport->d_id.b.area; + cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain; + cmd_pkt->vp_index = sp->fcport->vp_idx; + + /* Build IOCB segments */ + if (qla2xx_build_scsi_type_6_iocbs(sp, cmd_pkt, tot_dsds)) + goto queuing_error_fcp_cmnd; + + int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); + + /* build FCP_CMND IU */ + memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd)); + int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun); + ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len; + + if (cmd->sc_data_direction == DMA_TO_DEVICE) + ctx->fcp_cmnd->additional_cdb_len |= 1; + else if (cmd->sc_data_direction == DMA_FROM_DEVICE) + ctx->fcp_cmnd->additional_cdb_len |= 2; + + memcpy(ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); + + fcp_dl = (uint32_t *)(ctx->fcp_cmnd->cdb + 16 + + additional_cdb_len); + *fcp_dl = htonl((uint32_t)scsi_bufflen(cmd)); + + cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(ctx->fcp_cmnd_len); + cmd_pkt->fcp_cmnd_dseg_address[0] = + cpu_to_le32(LSD(ctx->fcp_cmnd_dma)); + cmd_pkt->fcp_cmnd_dseg_address[1] = + cpu_to_le32(MSD(ctx->fcp_cmnd_dma)); + + sp->flags |= SRB_FCP_CMND_DMA_VALID; + cmd_pkt->byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd)); + /* Set total data segment count. */ + cmd_pkt->entry_count = (uint8_t)req_cnt; + /* Specify response queue number where + * completion should happen + */ + cmd_pkt->entry_status = (uint8_t) rsp->id; + } else { + struct cmd_type_7 *cmd_pkt; + req_cnt = qla24xx_calc_iocbs(tot_dsds); + if (req->cnt < (req_cnt + 2)) { + cnt = (uint16_t)RD_REG_DWORD_RELAXED( + ®->req_q_out[0]); + if (req->ring_index < cnt) + req->cnt = cnt - req->ring_index; + else + req->cnt = req->length - + (req->ring_index - cnt); + } + if (req->cnt < (req_cnt + 2)) + goto queuing_error; + + cmd_pkt = (struct cmd_type_7 *)req->ring_ptr; + cmd_pkt->handle = MAKE_HANDLE(req->id, handle); + + /* Zero out remaining portion of packet. */ + /* tagged queuing modifier -- default is TSK_SIMPLE (0).*/ + clr_ptr = (uint32_t *)cmd_pkt + 2; + memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8); + cmd_pkt->dseg_count = cpu_to_le16(tot_dsds); + + /* Set NPORT-ID and LUN number*/ + cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id); + cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa; + cmd_pkt->port_id[1] = sp->fcport->d_id.b.area; + cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain; + cmd_pkt->vp_index = sp->fcport->vp_idx; + + int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); + host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, + sizeof(cmd_pkt->lun)); + + /* Load SCSI command packet. */ + memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len); + host_to_fcp_swap(cmd_pkt->fcp_cdb, sizeof(cmd_pkt->fcp_cdb)); + + cmd_pkt->byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd)); + + /* Build IOCB segments */ + qla24xx_build_scsi_iocbs(sp, cmd_pkt, tot_dsds); + + /* Set total data segment count. */ + cmd_pkt->entry_count = (uint8_t)req_cnt; + /* Specify response queue number where + * completion should happen. + */ + cmd_pkt->entry_status = (uint8_t) rsp->id; + + } + /* Build command packet. */ + req->current_outstanding_cmd = handle; + req->outstanding_cmds[handle] = sp; + sp->handle = handle; + sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; + req->cnt -= req_cnt; + wmb(); + + /* Adjust ring index. */ + req->ring_index++; + if (req->ring_index == req->length) { + req->ring_index = 0; + req->ring_ptr = req->ring; + } else + req->ring_ptr++; + + sp->flags |= SRB_DMA_VALID; + + /* Set chip new ring index. */ + /* write, read and verify logic */ + dbval = dbval | (req->id << 8) | (req->ring_index << 16); + if (ql2xdbwr) + qla82xx_wr_32(ha, ha->nxdb_wr_ptr, dbval); + else { + WRT_REG_DWORD( + (unsigned long __iomem *)ha->nxdb_wr_ptr, + dbval); + wmb(); + while (RD_REG_DWORD(ha->nxdb_rd_ptr) != dbval) { + WRT_REG_DWORD( + (unsigned long __iomem *)ha->nxdb_wr_ptr, + dbval); + wmb(); + } + } + + /* Manage unprocessed RIO/ZIO commands in response queue. */ + if (vha->flags.process_response_queue && + rsp->ring_ptr->signature != RESPONSE_PROCESSED) + qla24xx_process_response_queue(vha, rsp); + + spin_unlock_irqrestore(&ha->hardware_lock, flags); + return QLA_SUCCESS; + +queuing_error_fcp_cmnd: + dma_pool_free(ha->fcp_cmnd_dma_pool, ctx->fcp_cmnd, ctx->fcp_cmnd_dma); +queuing_error: + if (tot_dsds) + scsi_dma_unmap(cmd); + + if (sp->ctx) { + mempool_free(sp->ctx, ha->ctx_mempool); + sp->ctx = NULL; + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + return QLA_FUNCTION_FAILED; +} + +uint32_t * +qla82xx_read_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, + uint32_t length) +{ + uint32_t i; + uint32_t val; + struct qla_hw_data *ha = vha->hw; + + /* Dword reads to flash. */ + for (i = 0; i < length/4; i++, faddr += 4) { + if (qla82xx_rom_fast_read(ha, faddr, &val)) { + qla_printk(KERN_WARNING, ha, + "Do ROM fast read failed\n"); + goto done_read; + } + dwptr[i] = __constant_cpu_to_le32(val); + } +done_read: + return dwptr; +} + +int +qla82xx_unprotect_flash(struct qla_hw_data *ha) +{ + int ret; + uint32_t val; + + ret = ql82xx_rom_lock_d(ha); + if (ret < 0) { + qla_printk(KERN_WARNING, ha, "ROM Lock failed\n"); + return ret; + } + + ret = qla82xx_read_status_reg(ha, &val); + if (ret < 0) + goto done_unprotect; + + val &= ~(0x7 << 2); + ret = qla82xx_write_status_reg(ha, val); + if (ret < 0) { + val |= (0x7 << 2); + qla82xx_write_status_reg(ha, val); + } + + if (qla82xx_write_disable_flash(ha) != 0) + qla_printk(KERN_WARNING, ha, "Write disable failed\n"); + +done_unprotect: + qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); + return ret; +} + +int +qla82xx_protect_flash(struct qla_hw_data *ha) +{ + int ret; + uint32_t val; + + ret = ql82xx_rom_lock_d(ha); + if (ret < 0) { + qla_printk(KERN_WARNING, ha, "ROM Lock failed\n"); + return ret; + } + + ret = qla82xx_read_status_reg(ha, &val); + if (ret < 0) + goto done_protect; + + val |= (0x7 << 2); + /* LOCK all sectors */ + ret = qla82xx_write_status_reg(ha, val); + if (ret < 0) + qla_printk(KERN_WARNING, ha, "Write status register failed\n"); + + if (qla82xx_write_disable_flash(ha) != 0) + qla_printk(KERN_WARNING, ha, "Write disable failed\n"); +done_protect: + qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); + return ret; +} + +int +qla82xx_erase_sector(struct qla_hw_data *ha, int addr) +{ + int ret = 0; + + ret = ql82xx_rom_lock_d(ha); + if (ret < 0) { + qla_printk(KERN_WARNING, ha, "ROM Lock failed\n"); + return ret; + } + + qla82xx_flash_set_write_enable(ha); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ADDRESS, addr); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 3); + qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_SE); + + if (qla82xx_wait_rom_done(ha)) { + qla_printk(KERN_WARNING, ha, + "Error waiting for rom done\n"); + ret = -1; + goto done; + } + ret = qla82xx_flash_wait_write_finish(ha); +done: + qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); + return ret; +} + +/* + * Address and length are byte address + */ +uint8_t * +qla82xx_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + scsi_block_requests(vha->host); + qla82xx_read_flash_data(vha, (uint32_t *)buf, offset, length); + scsi_unblock_requests(vha->host); + return buf; +} + +static int +qla82xx_write_flash_data(struct scsi_qla_host *vha, uint32_t *dwptr, + uint32_t faddr, uint32_t dwords) +{ + int ret; + uint32_t liter; + uint32_t sec_mask, rest_addr; + dma_addr_t optrom_dma; + void *optrom = NULL; + int page_mode = 0; + struct qla_hw_data *ha = vha->hw; + + ret = -1; + + /* Prepare burst-capable write on supported ISPs. */ + if (page_mode && !(faddr & 0xfff) && + dwords > OPTROM_BURST_DWORDS) { + optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, + &optrom_dma, GFP_KERNEL); + if (!optrom) { + qla_printk(KERN_DEBUG, ha, + "Unable to allocate memory for optrom " + "burst write (%x KB).\n", + OPTROM_BURST_SIZE / 1024); + } + } + + rest_addr = ha->fdt_block_size - 1; + sec_mask = ~rest_addr; + + ret = qla82xx_unprotect_flash(ha); + if (ret) { + qla_printk(KERN_WARNING, ha, + "Unable to unprotect flash for update.\n"); + goto write_done; + } + + for (liter = 0; liter < dwords; liter++, faddr += 4, dwptr++) { + /* Are we at the beginning of a sector? */ + if ((faddr & rest_addr) == 0) { + + ret = qla82xx_erase_sector(ha, faddr); + if (ret) { + DEBUG9(qla_printk(KERN_ERR, ha, + "Unable to erase sector: " + "address=%x.\n", faddr)); + break; + } + } + + /* Go with burst-write. */ + if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) { + /* Copy data to DMA'ble buffer. */ + memcpy(optrom, dwptr, OPTROM_BURST_SIZE); + + ret = qla2x00_load_ram(vha, optrom_dma, + (ha->flash_data_off | faddr), + OPTROM_BURST_DWORDS); + if (ret != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "Unable to burst-write optrom segment " + "(%x/%x/%llx).\n", ret, + (ha->flash_data_off | faddr), + (unsigned long long)optrom_dma); + qla_printk(KERN_WARNING, ha, + "Reverting to slow-write.\n"); + + dma_free_coherent(&ha->pdev->dev, + OPTROM_BURST_SIZE, optrom, optrom_dma); + optrom = NULL; + } else { + liter += OPTROM_BURST_DWORDS - 1; + faddr += OPTROM_BURST_DWORDS - 1; + dwptr += OPTROM_BURST_DWORDS - 1; + continue; + } + } + + ret = qla82xx_write_flash_dword(ha, faddr, + cpu_to_le32(*dwptr)); + if (ret) { + DEBUG9(printk(KERN_DEBUG "%s(%ld) Unable to program" + "flash address=%x data=%x.\n", __func__, + ha->host_no, faddr, *dwptr)); + break; + } + } + + ret = qla82xx_protect_flash(ha); + if (ret) + qla_printk(KERN_WARNING, ha, + "Unable to protect flash after update.\n"); +write_done: + if (optrom) + dma_free_coherent(&ha->pdev->dev, + OPTROM_BURST_SIZE, optrom, optrom_dma); + return ret; +} + +int +qla82xx_write_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, + uint32_t offset, uint32_t length) +{ + int rval; + + /* Suspend HBA. */ + scsi_block_requests(vha->host); + rval = qla82xx_write_flash_data(vha, (uint32_t *)buf, offset, + length >> 2); + scsi_unblock_requests(vha->host); + + /* Convert return ISP82xx to generic */ + if (rval) + rval = QLA_FUNCTION_FAILED; + else + rval = QLA_SUCCESS; + return rval; +} + +void +qla82xx_start_iocbs(srb_t *sp) +{ + struct qla_hw_data *ha = sp->fcport->vha->hw; + struct req_que *req = ha->req_q_map[0]; + struct device_reg_82xx __iomem *reg; + uint32_t dbval; + + /* Adjust ring index. */ + req->ring_index++; + if (req->ring_index == req->length) { + req->ring_index = 0; + req->ring_ptr = req->ring; + } else + req->ring_ptr++; + + reg = &ha->iobase->isp82; + dbval = 0x04 | (ha->portnum << 5); + + dbval = dbval | (req->id << 8) | (req->ring_index << 16); + WRT_REG_DWORD((unsigned long __iomem *)ha->nxdb_wr_ptr, dbval); + wmb(); + while (RD_REG_DWORD(ha->nxdb_rd_ptr) != dbval) { + WRT_REG_DWORD((unsigned long __iomem *)ha->nxdb_wr_ptr, dbval); + wmb(); + } +} + +/* + * qla82xx_device_bootstrap + * Initialize device, set DEV_READY, start fw + * + * Note: + * IDC lock must be held upon entry + * + * Return: + * Success : 0 + * Failed : 1 + */ +static int +qla82xx_device_bootstrap(scsi_qla_host_t *vha) +{ + int rval, i, timeout; + uint32_t old_count, count; + struct qla_hw_data *ha = vha->hw; + + if (qla82xx_need_reset(ha)) + goto dev_initialize; + + old_count = qla82xx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); + + for (i = 0; i < 10; i++) { + timeout = msleep_interruptible(200); + if (timeout) { + qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_FAILED); + return QLA_FUNCTION_FAILED; + } + + count = qla82xx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); + if (count != old_count) + goto dev_ready; + } + +dev_initialize: + /* set to DEV_INITIALIZING */ + qla_printk(KERN_INFO, ha, "HW State: INITIALIZING\n"); + qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_INITIALIZING); + + /* Driver that sets device state to initializating sets IDC version */ + qla82xx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION, QLA82XX_IDC_VERSION); + + qla82xx_idc_unlock(ha); + rval = qla82xx_start_firmware(vha); + qla82xx_idc_lock(ha); + + if (rval != QLA_SUCCESS) { + qla_printk(KERN_INFO, ha, "HW State: FAILED\n"); + qla82xx_clear_drv_active(ha); + qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_FAILED); + return rval; + } + +dev_ready: + qla_printk(KERN_INFO, ha, "HW State: READY\n"); + qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_READY); + + return QLA_SUCCESS; +} + +static void +qla82xx_dev_failed_handler(scsi_qla_host_t *vha) +{ + struct qla_hw_data *ha = vha->hw; + + /* Disable the board */ + qla_printk(KERN_INFO, ha, "Disabling the board\n"); + + /* Set DEV_FAILED flag to disable timer */ + vha->device_flags |= DFLG_DEV_FAILED; + qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16); + qla2x00_mark_all_devices_lost(vha, 0); + vha->flags.online = 0; + vha->flags.init_done = 0; +} + +/* + * qla82xx_need_reset_handler + * Code to start reset sequence + * + * Note: + * IDC lock must be held upon entry + * + * Return: + * Success : 0 + * Failed : 1 + */ +static void +qla82xx_need_reset_handler(scsi_qla_host_t *vha) +{ + uint32_t dev_state, drv_state, drv_active; + unsigned long reset_timeout; + struct qla_hw_data *ha = vha->hw; + struct req_que *req = ha->req_q_map[0]; + + if (vha->flags.online) { + qla82xx_idc_unlock(ha); + qla2x00_abort_isp_cleanup(vha); + ha->isp_ops->get_flash_version(vha, req->ring); + ha->isp_ops->nvram_config(vha); + qla82xx_idc_lock(ha); + } + + qla82xx_set_rst_ready(ha); + + /* wait for 10 seconds for reset ack from all functions */ + reset_timeout = jiffies + (ha->nx_reset_timeout * HZ); + + drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); + + while (drv_state != drv_active) { + if (time_after_eq(jiffies, reset_timeout)) { + qla_printk(KERN_INFO, ha, + "%s: RESET TIMEOUT!\n", QLA2XXX_DRIVER_NAME); + break; + } + qla82xx_idc_unlock(ha); + msleep(1000); + qla82xx_idc_lock(ha); + drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); + drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); + } + + dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + /* Force to DEV_COLD unless someone else is starting a reset */ + if (dev_state != QLA82XX_DEV_INITIALIZING) { + qla_printk(KERN_INFO, ha, "HW State: COLD/RE-INIT\n"); + qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_COLD); + } +} + +static void +qla82xx_check_fw_alive(scsi_qla_host_t *vha) +{ + uint32_t fw_heartbeat_counter, halt_status; + struct qla_hw_data *ha = vha->hw; + + fw_heartbeat_counter = qla82xx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); + if (vha->fw_heartbeat_counter == fw_heartbeat_counter) { + vha->seconds_since_last_heartbeat++; + /* FW not alive after 2 seconds */ + if (vha->seconds_since_last_heartbeat == 2) { + vha->seconds_since_last_heartbeat = 0; + halt_status = qla82xx_rd_32(ha, + QLA82XX_PEG_HALT_STATUS1); + if (halt_status & HALT_STATUS_UNRECOVERABLE) { + set_bit(ISP_UNRECOVERABLE, &vha->dpc_flags); + } else { + qla_printk(KERN_INFO, ha, + "scsi(%ld): %s - detect abort needed\n", + vha->host_no, __func__); + set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); + } + qla2xxx_wake_dpc(vha); + } + } + vha->fw_heartbeat_counter = fw_heartbeat_counter; +} + +/* + * qla82xx_device_state_handler + * Main state handler + * + * Note: + * IDC lock must be held upon entry + * + * Return: + * Success : 0 + * Failed : 1 + */ +int +qla82xx_device_state_handler(scsi_qla_host_t *vha) +{ + uint32_t dev_state; + uint32_t drv_active; + int rval = QLA_SUCCESS; + unsigned long dev_init_timeout; + struct qla_hw_data *ha = vha->hw; + + qla82xx_idc_lock(ha); + if (!vha->flags.init_done) + qla82xx_set_drv_active(vha); + + /* Set cold state*/ + if (!PCI_FUNC(ha->pdev->devfn & 1)) { + + /* Check if other functions alive, else set dev state + * to cold + */ + drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); + drv_active &= ~(1 << (ha->portnum * 4)); + drv_active &= ~(1 << ((ha->portnum + 1) * 4)); + + dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + if (!drv_active) { + + switch (dev_state) { + case QLA82XX_DEV_COLD: + case QLA82XX_DEV_READY: + case QLA82XX_DEV_INITIALIZING: + case QLA82XX_DEV_NEED_RESET: + case QLA82XX_DEV_NEED_QUIESCENT: + case QLA82XX_DEV_QUIESCENT: + case QLA82XX_DEV_FAILED: + break; + default: + qla_printk(KERN_INFO, ha, + "No other function exist," + " resetting dev state to COLD\n"); + qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_COLD); + break; + } + } + } + + /* wait for 30 seconds for device to go ready */ + dev_init_timeout = jiffies + (ha->nx_dev_init_timeout * HZ); + + while (1) { + + if (time_after_eq(jiffies, dev_init_timeout)) { + DEBUG(qla_printk(KERN_INFO, ha, + "%s: device init failed!\n", + QLA2XXX_DRIVER_NAME)); + rval = QLA_FUNCTION_FAILED; + break; + } + dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + switch (dev_state) { + case QLA82XX_DEV_READY: + goto exit; + case QLA82XX_DEV_COLD: + rval = qla82xx_device_bootstrap(vha); + goto exit; + case QLA82XX_DEV_INITIALIZING: + qla82xx_idc_unlock(ha); + msleep(1000); + qla82xx_idc_lock(ha); + break; + case QLA82XX_DEV_NEED_RESET: + if (!ql2xdontresethba) + qla82xx_need_reset_handler(vha); + break; + case QLA82XX_DEV_NEED_QUIESCENT: + qla82xx_set_qsnt_ready(ha); + case QLA82XX_DEV_QUIESCENT: + qla82xx_idc_unlock(ha); + msleep(1000); + qla82xx_idc_lock(ha); + break; + case QLA82XX_DEV_FAILED: + qla82xx_dev_failed_handler(vha); + rval = QLA_FUNCTION_FAILED; + goto exit; + default: + qla82xx_idc_unlock(ha); + msleep(1000); + qla82xx_idc_lock(ha); + } + } +exit: + qla82xx_idc_unlock(ha); + return rval; +} + +void qla82xx_watchdog(scsi_qla_host_t *vha) +{ + uint32_t dev_state; + struct qla_hw_data *ha = vha->hw; + + dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + + /* don't poll if reset is going on */ + if (!(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || + test_bit(ISP_ABORT_RETRY, &vha->dpc_flags))) { + if (dev_state == QLA82XX_DEV_NEED_RESET) { + qla_printk(KERN_WARNING, ha, + "%s(): Adapter reset needed!\n", __func__); + set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); + qla2xxx_wake_dpc(vha); + } else { + qla82xx_check_fw_alive(vha); + } + } +} + +int qla82xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + rval = qla82xx_device_state_handler(vha); + return rval; +} + +/* + * qla82xx_abort_isp + * Resets ISP and aborts all outstanding commands. + * + * Input: + * ha = adapter block pointer. + * + * Returns: + * 0 = success + */ +int +qla82xx_abort_isp(scsi_qla_host_t *vha) +{ + int rval; + struct qla_hw_data *ha = vha->hw; + uint32_t dev_state; + + if (vha->device_flags & DFLG_DEV_FAILED) { + qla_printk(KERN_WARNING, ha, + "%s(%ld): Device in failed state, " + "Exiting.\n", __func__, vha->host_no); + return QLA_SUCCESS; + } + + qla82xx_idc_lock(ha); + dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + if (dev_state != QLA82XX_DEV_INITIALIZING) { + qla_printk(KERN_INFO, ha, "HW State: NEED RESET\n"); + qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_NEED_RESET); + } else + qla_printk(KERN_INFO, ha, "HW State: DEVICE INITIALIZING\n"); + qla82xx_idc_unlock(ha); + + rval = qla82xx_device_state_handler(vha); + + qla82xx_idc_lock(ha); + qla82xx_clear_rst_ready(ha); + qla82xx_idc_unlock(ha); + + if (rval == QLA_SUCCESS) + qla82xx_restart_isp(vha); + return rval; +} + +/* + * qla82xx_fcoe_ctx_reset + * Perform a quick reset and aborts all outstanding commands. + * This will only perform an FCoE context reset and avoids a full blown + * chip reset. + * + * Input: + * ha = adapter block pointer. + * is_reset_path = flag for identifying the reset path. + * + * Returns: + * 0 = success + */ +int qla82xx_fcoe_ctx_reset(scsi_qla_host_t *vha) +{ + int rval = QLA_FUNCTION_FAILED; + + if (vha->flags.online) { + /* Abort all outstanding commands, so as to be requeued later */ + qla2x00_abort_isp_cleanup(vha); + } + + /* Stop currently executing firmware. + * This will destroy existing FCoE context at the F/W end. + */ + qla2x00_try_to_stop_firmware(vha); + + /* Restart. Creates a new FCoE context on INIT_FIRMWARE. */ + rval = qla82xx_restart_isp(vha); + + return rval; +} + +/* + * qla2x00_wait_for_fcoe_ctx_reset + * Wait till the FCoE context is reset. + * + * Note: + * Does context switching here. + * Release SPIN_LOCK (if any) before calling this routine. + * + * Return: + * Success (fcoe_ctx reset is done) : 0 + * Failed (fcoe_ctx reset not completed within max loop timout ) : 1 + */ +int qla2x00_wait_for_fcoe_ctx_reset(scsi_qla_host_t *vha) +{ + int status = QLA_FUNCTION_FAILED; + unsigned long wait_reset; + + wait_reset = jiffies + (MAX_LOOP_TIMEOUT * HZ); + while ((test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) + && time_before(jiffies, wait_reset)) { + + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(HZ); + + if (!test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) && + !test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) { + status = QLA_SUCCESS; + break; + } + } + DEBUG2(printk(KERN_INFO + "%s status=%d\n", __func__, status)); + + return status; +} diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h new file mode 100644 index 000000000000..7804bbbb3db3 --- /dev/null +++ b/drivers/scsi/qla2xxx/qla_nx.h @@ -0,0 +1,888 @@ +/* + * QLogic Fibre Channel HBA Driver + * Copyright (c) 2003-2008 QLogic Corporation + * + * See LICENSE.qla2xxx for copyright and licensing details. + */ +#ifndef __QLA_NX_H +#define __QLA_NX_H + +/* + * Following are the states of the Phantom. Phantom will set them and + * Host will read to check if the fields are correct. +*/ +#define PHAN_INITIALIZE_FAILED 0xffff +#define PHAN_INITIALIZE_COMPLETE 0xff01 + +/* Host writes the following to notify that it has done the init-handshake */ +#define PHAN_INITIALIZE_ACK 0xf00f +#define PHAN_PEG_RCV_INITIALIZED 0xff01 + +/*CRB_RELATED*/ +#define QLA82XX_CRB_BASE QLA82XX_CAM_RAM(0x200) +#define QLA82XX_REG(X) (QLA82XX_CRB_BASE+(X)) + +#define CRB_CMDPEG_STATE QLA82XX_REG(0x50) +#define CRB_RCVPEG_STATE QLA82XX_REG(0x13c) +#define BOOT_LOADER_DIMM_STATUS QLA82XX_REG(0x54) +#define CRB_DMA_SHIFT QLA82XX_REG(0xcc) + +#define QLA82XX_HW_H0_CH_HUB_ADR 0x05 +#define QLA82XX_HW_H1_CH_HUB_ADR 0x0E +#define QLA82XX_HW_H2_CH_HUB_ADR 0x03 +#define QLA82XX_HW_H3_CH_HUB_ADR 0x01 +#define QLA82XX_HW_H4_CH_HUB_ADR 0x06 +#define QLA82XX_HW_H5_CH_HUB_ADR 0x07 +#define QLA82XX_HW_H6_CH_HUB_ADR 0x08 + +/* Hub 0 */ +#define QLA82XX_HW_MN_CRB_AGT_ADR 0x15 +#define QLA82XX_HW_MS_CRB_AGT_ADR 0x25 + +/* Hub 1 */ +#define QLA82XX_HW_PS_CRB_AGT_ADR 0x73 +#define QLA82XX_HW_QMS_CRB_AGT_ADR 0x00 +#define QLA82XX_HW_RPMX3_CRB_AGT_ADR 0x0b +#define QLA82XX_HW_SQGS0_CRB_AGT_ADR 0x01 +#define QLA82XX_HW_SQGS1_CRB_AGT_ADR 0x02 +#define QLA82XX_HW_SQGS2_CRB_AGT_ADR 0x03 +#define QLA82XX_HW_SQGS3_CRB_AGT_ADR 0x04 +#define QLA82XX_HW_C2C0_CRB_AGT_ADR 0x58 +#define QLA82XX_HW_C2C1_CRB_AGT_ADR 0x59 +#define QLA82XX_HW_C2C2_CRB_AGT_ADR 0x5a +#define QLA82XX_HW_RPMX2_CRB_AGT_ADR 0x0a +#define QLA82XX_HW_RPMX4_CRB_AGT_ADR 0x0c +#define QLA82XX_HW_RPMX7_CRB_AGT_ADR 0x0f +#define QLA82XX_HW_RPMX9_CRB_AGT_ADR 0x12 +#define QLA82XX_HW_SMB_CRB_AGT_ADR 0x18 + +/* Hub 2 */ +#define QLA82XX_HW_NIU_CRB_AGT_ADR 0x31 +#define QLA82XX_HW_I2C0_CRB_AGT_ADR 0x19 +#define QLA82XX_HW_I2C1_CRB_AGT_ADR 0x29 + +#define QLA82XX_HW_SN_CRB_AGT_ADR 0x10 +#define QLA82XX_HW_I2Q_CRB_AGT_ADR 0x20 +#define QLA82XX_HW_LPC_CRB_AGT_ADR 0x22 +#define QLA82XX_HW_ROMUSB_CRB_AGT_ADR 0x21 +#define QLA82XX_HW_QM_CRB_AGT_ADR 0x66 +#define QLA82XX_HW_SQG0_CRB_AGT_ADR 0x60 +#define QLA82XX_HW_SQG1_CRB_AGT_ADR 0x61 +#define QLA82XX_HW_SQG2_CRB_AGT_ADR 0x62 +#define QLA82XX_HW_SQG3_CRB_AGT_ADR 0x63 +#define QLA82XX_HW_RPMX1_CRB_AGT_ADR 0x09 +#define QLA82XX_HW_RPMX5_CRB_AGT_ADR 0x0d +#define QLA82XX_HW_RPMX6_CRB_AGT_ADR 0x0e +#define QLA82XX_HW_RPMX8_CRB_AGT_ADR 0x11 + +/* Hub 3 */ +#define QLA82XX_HW_PH_CRB_AGT_ADR 0x1A +#define QLA82XX_HW_SRE_CRB_AGT_ADR 0x50 +#define QLA82XX_HW_EG_CRB_AGT_ADR 0x51 +#define QLA82XX_HW_RPMX0_CRB_AGT_ADR 0x08 + +/* Hub 4 */ +#define QLA82XX_HW_PEGN0_CRB_AGT_ADR 0x40 +#define QLA82XX_HW_PEGN1_CRB_AGT_ADR 0x41 +#define QLA82XX_HW_PEGN2_CRB_AGT_ADR 0x42 +#define QLA82XX_HW_PEGN3_CRB_AGT_ADR 0x43 +#define QLA82XX_HW_PEGNI_CRB_AGT_ADR 0x44 +#define QLA82XX_HW_PEGND_CRB_AGT_ADR 0x45 +#define QLA82XX_HW_PEGNC_CRB_AGT_ADR 0x46 +#define QLA82XX_HW_PEGR0_CRB_AGT_ADR 0x47 +#define QLA82XX_HW_PEGR1_CRB_AGT_ADR 0x48 +#define QLA82XX_HW_PEGR2_CRB_AGT_ADR 0x49 +#define QLA82XX_HW_PEGR3_CRB_AGT_ADR 0x4a +#define QLA82XX_HW_PEGN4_CRB_AGT_ADR 0x4b + +/* Hub 5 */ +#define QLA82XX_HW_PEGS0_CRB_AGT_ADR 0x40 +#define QLA82XX_HW_PEGS1_CRB_AGT_ADR 0x41 +#define QLA82XX_HW_PEGS2_CRB_AGT_ADR 0x42 +#define QLA82XX_HW_PEGS3_CRB_AGT_ADR 0x43 +#define QLA82XX_HW_PEGSI_CRB_AGT_ADR 0x44 +#define QLA82XX_HW_PEGSD_CRB_AGT_ADR 0x45 +#define QLA82XX_HW_PEGSC_CRB_AGT_ADR 0x46 + +/* Hub 6 */ +#define QLA82XX_HW_CAS0_CRB_AGT_ADR 0x46 +#define QLA82XX_HW_CAS1_CRB_AGT_ADR 0x47 +#define QLA82XX_HW_CAS2_CRB_AGT_ADR 0x48 +#define QLA82XX_HW_CAS3_CRB_AGT_ADR 0x49 +#define QLA82XX_HW_NCM_CRB_AGT_ADR 0x16 +#define QLA82XX_HW_TMR_CRB_AGT_ADR 0x17 +#define QLA82XX_HW_XDMA_CRB_AGT_ADR 0x05 +#define QLA82XX_HW_OCM0_CRB_AGT_ADR 0x06 +#define QLA82XX_HW_OCM1_CRB_AGT_ADR 0x07 + +/* This field defines PCI/X adr [25:20] of agents on the CRB */ +/* */ +#define QLA82XX_HW_PX_MAP_CRB_PH 0 +#define QLA82XX_HW_PX_MAP_CRB_PS 1 +#define QLA82XX_HW_PX_MAP_CRB_MN 2 +#define QLA82XX_HW_PX_MAP_CRB_MS 3 +#define QLA82XX_HW_PX_MAP_CRB_SRE 5 +#define QLA82XX_HW_PX_MAP_CRB_NIU 6 +#define QLA82XX_HW_PX_MAP_CRB_QMN 7 +#define QLA82XX_HW_PX_MAP_CRB_SQN0 8 +#define QLA82XX_HW_PX_MAP_CRB_SQN1 9 +#define QLA82XX_HW_PX_MAP_CRB_SQN2 10 +#define QLA82XX_HW_PX_MAP_CRB_SQN3 11 +#define QLA82XX_HW_PX_MAP_CRB_QMS 12 +#define QLA82XX_HW_PX_MAP_CRB_SQS0 13 +#define QLA82XX_HW_PX_MAP_CRB_SQS1 14 +#define QLA82XX_HW_PX_MAP_CRB_SQS2 15 +#define QLA82XX_HW_PX_MAP_CRB_SQS3 16 +#define QLA82XX_HW_PX_MAP_CRB_PGN0 17 +#define QLA82XX_HW_PX_MAP_CRB_PGN1 18 +#define QLA82XX_HW_PX_MAP_CRB_PGN2 19 +#define QLA82XX_HW_PX_MAP_CRB_PGN3 20 +#define QLA82XX_HW_PX_MAP_CRB_PGN4 QLA82XX_HW_PX_MAP_CRB_SQS2 +#define QLA82XX_HW_PX_MAP_CRB_PGND 21 +#define QLA82XX_HW_PX_MAP_CRB_PGNI 22 +#define QLA82XX_HW_PX_MAP_CRB_PGS0 23 +#define QLA82XX_HW_PX_MAP_CRB_PGS1 24 +#define QLA82XX_HW_PX_MAP_CRB_PGS2 25 +#define QLA82XX_HW_PX_MAP_CRB_PGS3 26 +#define QLA82XX_HW_PX_MAP_CRB_PGSD 27 +#define QLA82XX_HW_PX_MAP_CRB_PGSI 28 +#define QLA82XX_HW_PX_MAP_CRB_SN 29 +#define QLA82XX_HW_PX_MAP_CRB_EG 31 +#define QLA82XX_HW_PX_MAP_CRB_PH2 32 +#define QLA82XX_HW_PX_MAP_CRB_PS2 33 +#define QLA82XX_HW_PX_MAP_CRB_CAM 34 +#define QLA82XX_HW_PX_MAP_CRB_CAS0 35 +#define QLA82XX_HW_PX_MAP_CRB_CAS1 36 +#define QLA82XX_HW_PX_MAP_CRB_CAS2 37 +#define QLA82XX_HW_PX_MAP_CRB_C2C0 38 +#define QLA82XX_HW_PX_MAP_CRB_C2C1 39 +#define QLA82XX_HW_PX_MAP_CRB_TIMR 40 +#define QLA82XX_HW_PX_MAP_CRB_RPMX1 42 +#define QLA82XX_HW_PX_MAP_CRB_RPMX2 43 +#define QLA82XX_HW_PX_MAP_CRB_RPMX3 44 +#define QLA82XX_HW_PX_MAP_CRB_RPMX4 45 +#define QLA82XX_HW_PX_MAP_CRB_RPMX5 46 +#define QLA82XX_HW_PX_MAP_CRB_RPMX6 47 +#define QLA82XX_HW_PX_MAP_CRB_RPMX7 48 +#define QLA82XX_HW_PX_MAP_CRB_XDMA 49 +#define QLA82XX_HW_PX_MAP_CRB_I2Q 50 +#define QLA82XX_HW_PX_MAP_CRB_ROMUSB 51 +#define QLA82XX_HW_PX_MAP_CRB_CAS3 52 +#define QLA82XX_HW_PX_MAP_CRB_RPMX0 53 +#define QLA82XX_HW_PX_MAP_CRB_RPMX8 54 +#define QLA82XX_HW_PX_MAP_CRB_RPMX9 55 +#define QLA82XX_HW_PX_MAP_CRB_OCM0 56 +#define QLA82XX_HW_PX_MAP_CRB_OCM1 57 +#define QLA82XX_HW_PX_MAP_CRB_SMB 58 +#define QLA82XX_HW_PX_MAP_CRB_I2C0 59 +#define QLA82XX_HW_PX_MAP_CRB_I2C1 60 +#define QLA82XX_HW_PX_MAP_CRB_LPC 61 +#define QLA82XX_HW_PX_MAP_CRB_PGNC 62 +#define QLA82XX_HW_PX_MAP_CRB_PGR0 63 +#define QLA82XX_HW_PX_MAP_CRB_PGR1 4 +#define QLA82XX_HW_PX_MAP_CRB_PGR2 30 +#define QLA82XX_HW_PX_MAP_CRB_PGR3 41 + +/* This field defines CRB adr [31:20] of the agents */ +/* */ + +#define QLA82XX_HW_CRB_HUB_AGT_ADR_MN ((QLA82XX_HW_H0_CH_HUB_ADR << 7) | \ + QLA82XX_HW_MN_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PH ((QLA82XX_HW_H0_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PH_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_MS ((QLA82XX_HW_H0_CH_HUB_ADR << 7) | \ + QLA82XX_HW_MS_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PS ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PS_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SS ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SS_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX3 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_QMS ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_QMS_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQS0 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQGS0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQS1 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQGS1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQS2 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQGS2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQS3 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQGS3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_C2C0 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_C2C0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_C2C1 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_C2C1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX2 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX4 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX4_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX7 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX7_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX9 ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX9_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SMB ((QLA82XX_HW_H1_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SMB_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_NIU ((QLA82XX_HW_H2_CH_HUB_ADR << 7) | \ + QLA82XX_HW_NIU_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_I2C0 ((QLA82XX_HW_H2_CH_HUB_ADR << 7) | \ + QLA82XX_HW_I2C0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_I2C1 ((QLA82XX_HW_H2_CH_HUB_ADR << 7) | \ + QLA82XX_HW_I2C1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SRE ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SRE_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_EG ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_EG_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX0 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_QMN ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_QM_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQN0 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQG0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQN1 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQG1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQN2 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQG2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SQN3 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SQG3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX1 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX5 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX5_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX6 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX6_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX8 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_RPMX8_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_CAS0 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_CAS0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_CAS1 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_CAS1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_CAS2 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_CAS2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_CAS3 ((QLA82XX_HW_H3_CH_HUB_ADR << 7) | \ + QLA82XX_HW_CAS3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGNI ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGNI_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGND ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGND_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGN0 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGN0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGN1 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGN1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGN2 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGN2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGN3 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGN3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGN4 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGN4_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGNC ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGNC_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGR0 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGR0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGR1 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGR1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGR2 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGR2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGR3 ((QLA82XX_HW_H4_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGR3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGSI ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGSI_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGSD ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGSD_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGS0 ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGS0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGS1 ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGS1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGS2 ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGS2_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGS3 ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGS3_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_PGSC ((QLA82XX_HW_H5_CH_HUB_ADR << 7) | \ + QLA82XX_HW_PEGSC_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_CAM ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_NCM_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_TIMR ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_TMR_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_XDMA ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_XDMA_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_SN ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_SN_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_I2Q ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_I2Q_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_ROMUSB ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_ROMUSB_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_OCM0 ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_OCM0_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_OCM1 ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_OCM1_CRB_AGT_ADR) +#define QLA82XX_HW_CRB_HUB_AGT_ADR_LPC ((QLA82XX_HW_H6_CH_HUB_ADR << 7) | \ + QLA82XX_HW_LPC_CRB_AGT_ADR) + +#define ROMUSB_GLB (QLA82XX_CRB_ROMUSB + 0x00000) +#define QLA82XX_ROMUSB_GLB_PEGTUNE_DONE (ROMUSB_GLB + 0x005c) +#define QLA82XX_ROMUSB_GLB_STATUS (ROMUSB_GLB + 0x0004) +#define QLA82XX_ROMUSB_GLB_SW_RESET (ROMUSB_GLB + 0x0008) +#define QLA82XX_ROMUSB_ROM_ADDRESS (ROMUSB_ROM + 0x0008) +#define QLA82XX_ROMUSB_ROM_WDATA (ROMUSB_ROM + 0x000c) +#define QLA82XX_ROMUSB_ROM_ABYTE_CNT (ROMUSB_ROM + 0x0010) +#define QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT (ROMUSB_ROM + 0x0014) +#define QLA82XX_ROMUSB_ROM_RDATA (ROMUSB_ROM + 0x0018) + +#define ROMUSB_ROM (QLA82XX_CRB_ROMUSB + 0x10000) +#define QLA82XX_ROMUSB_ROM_INSTR_OPCODE (ROMUSB_ROM + 0x0004) +#define QLA82XX_ROMUSB_GLB_CAS_RST (ROMUSB_GLB + 0x0038) + +/* Lock IDs for ROM lock */ +#define ROM_LOCK_DRIVER 0x0d417340 + +#define QLA82XX_PCI_CRB_WINDOWSIZE 0x00100000 /* all are 1MB windows */ +#define QLA82XX_PCI_CRB_WINDOW(A) \ + (QLA82XX_PCI_CRBSPACE + (A)*QLA82XX_PCI_CRB_WINDOWSIZE) +#define QLA82XX_CRB_C2C_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_C2C0) +#define QLA82XX_CRB_C2C_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_C2C1) +#define QLA82XX_CRB_C2C_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_C2C2) +#define QLA82XX_CRB_CAM \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_CAM) +#define QLA82XX_CRB_CASPER \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_CAS) +#define QLA82XX_CRB_CASPER_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_CAS0) +#define QLA82XX_CRB_CASPER_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_CAS1) +#define QLA82XX_CRB_CASPER_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_CAS2) +#define QLA82XX_CRB_DDR_MD \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_MS) +#define QLA82XX_CRB_DDR_NET \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_MN) +#define QLA82XX_CRB_EPG \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_EG) +#define QLA82XX_CRB_I2Q \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_I2Q) +#define QLA82XX_CRB_NIU \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_NIU) + +#define QLA82XX_CRB_PCIX_HOST \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PH) +#define QLA82XX_CRB_PCIX_HOST2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PH2) +#define QLA82XX_CRB_PCIX_MD \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PS) +#define QLA82XX_CRB_PCIE \ + QLA82XX_CRB_PCIX_MD + +/* window 1 pcie slot */ +#define QLA82XX_CRB_PCIE2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PS2) +#define QLA82XX_CRB_PEG_MD_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGS0) +#define QLA82XX_CRB_PEG_MD_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGS1) +#define QLA82XX_CRB_PEG_MD_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGS2) +#define QLA82XX_CRB_PEG_MD_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGS3) +#define QLA82XX_CRB_PEG_MD_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGS3) +#define QLA82XX_CRB_PEG_MD_D \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGSD) +#define QLA82XX_CRB_PEG_MD_I \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGSI) +#define QLA82XX_CRB_PEG_NET_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGN0) +#define QLA82XX_CRB_PEG_NET_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGN1) +#define QLA82XX_CRB_PEG_NET_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGN2) +#define QLA82XX_CRB_PEG_NET_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGN3) +#define QLA82XX_CRB_PEG_NET_4 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGN4) +#define QLA82XX_CRB_PEG_NET_D \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGND) +#define QLA82XX_CRB_PEG_NET_I \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_PGNI) +#define QLA82XX_CRB_PQM_MD \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_QMS) +#define QLA82XX_CRB_PQM_NET \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_QMN) +#define QLA82XX_CRB_QDR_MD \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SS) +#define QLA82XX_CRB_QDR_NET \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SN) +#define QLA82XX_CRB_ROMUSB \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_ROMUSB) +#define QLA82XX_CRB_RPMX_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX0) +#define QLA82XX_CRB_RPMX_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX1) +#define QLA82XX_CRB_RPMX_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX2) +#define QLA82XX_CRB_RPMX_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX3) +#define QLA82XX_CRB_RPMX_4 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX4) +#define QLA82XX_CRB_RPMX_5 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX5) +#define QLA82XX_CRB_RPMX_6 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX6) +#define QLA82XX_CRB_RPMX_7 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_RPMX7) +#define QLA82XX_CRB_SQM_MD_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQS0) +#define QLA82XX_CRB_SQM_MD_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQS1) +#define QLA82XX_CRB_SQM_MD_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQS2) +#define QLA82XX_CRB_SQM_MD_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQS3) +#define QLA82XX_CRB_SQM_NET_0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQN0) +#define QLA82XX_CRB_SQM_NET_1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQN1) +#define QLA82XX_CRB_SQM_NET_2 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQN2) +#define QLA82XX_CRB_SQM_NET_3 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SQN3) +#define QLA82XX_CRB_SRE \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SRE) +#define QLA82XX_CRB_TIMER \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_TIMR) +#define QLA82XX_CRB_XDMA \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_XDMA) +#define QLA82XX_CRB_I2C0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_I2C0) +#define QLA82XX_CRB_I2C1 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_I2C1) +#define QLA82XX_CRB_OCM0 \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_OCM0) +#define QLA82XX_CRB_SMB \ + QLA82XX_PCI_CRB_WINDOW(QLA82XX_HW_PX_MAP_CRB_SMB) +#define QLA82XX_CRB_MAX \ + QLA82XX_PCI_CRB_WINDOW(64) + +/* + * ====================== BASE ADDRESSES ON-CHIP ====================== + * Base addresses of major components on-chip. + * ====================== BASE ADDRESSES ON-CHIP ====================== + */ +#define QLA82XX_ADDR_DDR_NET (0x0000000000000000ULL) +#define QLA82XX_ADDR_DDR_NET_MAX (0x000000000fffffffULL) + +/* Imbus address bit used to indicate a host address. This bit is + * eliminated by the pcie bar and bar select before presentation + * over pcie. */ +/* host memory via IMBUS */ +#define QLA82XX_P2_ADDR_PCIE (0x0000000800000000ULL) +#define QLA82XX_P3_ADDR_PCIE (0x0000008000000000ULL) +#define QLA82XX_ADDR_PCIE_MAX (0x0000000FFFFFFFFFULL) +#define QLA82XX_ADDR_OCM0 (0x0000000200000000ULL) +#define QLA82XX_ADDR_OCM0_MAX (0x00000002000fffffULL) +#define QLA82XX_ADDR_OCM1 (0x0000000200400000ULL) +#define QLA82XX_ADDR_OCM1_MAX (0x00000002004fffffULL) +#define QLA82XX_ADDR_QDR_NET (0x0000000300000000ULL) + +#define QLA82XX_P2_ADDR_QDR_NET_MAX (0x00000003001fffffULL) +#define QLA82XX_P3_ADDR_QDR_NET_MAX (0x0000000303ffffffULL) + +#define QLA82XX_PCI_CRBSPACE (unsigned long)0x06000000 +#define QLA82XX_PCI_DIRECT_CRB (unsigned long)0x04400000 +#define QLA82XX_PCI_CAMQM (unsigned long)0x04800000 +#define QLA82XX_PCI_CAMQM_MAX (unsigned long)0x04ffffff +#define QLA82XX_PCI_DDR_NET (unsigned long)0x00000000 +#define QLA82XX_PCI_QDR_NET (unsigned long)0x04000000 +#define QLA82XX_PCI_QDR_NET_MAX (unsigned long)0x043fffff + +/* + * Register offsets for MN + */ +#define MIU_CONTROL (0x000) +#define MIU_TAG (0x004) +#define MIU_TEST_AGT_CTRL (0x090) +#define MIU_TEST_AGT_ADDR_LO (0x094) +#define MIU_TEST_AGT_ADDR_HI (0x098) +#define MIU_TEST_AGT_WRDATA_LO (0x0a0) +#define MIU_TEST_AGT_WRDATA_HI (0x0a4) +#define MIU_TEST_AGT_WRDATA(i) (0x0a0+(4*(i))) +#define MIU_TEST_AGT_RDDATA_LO (0x0a8) +#define MIU_TEST_AGT_RDDATA_HI (0x0ac) +#define MIU_TEST_AGT_RDDATA(i) (0x0a8+(4*(i))) +#define MIU_TEST_AGT_ADDR_MASK 0xfffffff8 +#define MIU_TEST_AGT_UPPER_ADDR(off) (0) + +/* MIU_TEST_AGT_CTRL flags. work for SIU as well */ +#define MIU_TA_CTL_START 1 +#define MIU_TA_CTL_ENABLE 2 +#define MIU_TA_CTL_WRITE 4 +#define MIU_TA_CTL_BUSY 8 + +/*CAM RAM */ +# define QLA82XX_CAM_RAM_BASE (QLA82XX_CRB_CAM + 0x02000) +# define QLA82XX_CAM_RAM(reg) (QLA82XX_CAM_RAM_BASE + (reg)) + +#define QLA82XX_PEG_TUNE_MN_SPD_ZEROED 0x80000000 +#define QLA82XX_BOOT_LOADER_MN_ISSUE 0xff00ffff +#define QLA82XX_PORT_MODE_ADDR (QLA82XX_CAM_RAM(0x24)) +#define QLA82XX_PEG_HALT_STATUS1 (QLA82XX_CAM_RAM(0xa8)) +#define QLA82XX_PEG_HALT_STATUS2 (QLA82XX_CAM_RAM(0xac)) +#define QLA82XX_PEG_ALIVE_COUNTER (QLA82XX_CAM_RAM(0xb0)) + +#define QLA82XX_CAMRAM_DB1 (QLA82XX_CAM_RAM(0x1b8)) +#define QLA82XX_CAMRAM_DB2 (QLA82XX_CAM_RAM(0x1bc)) + +#define HALT_STATUS_UNRECOVERABLE 0x80000000 +#define HALT_STATUS_RECOVERABLE 0x40000000 + +/* Driver Coexistence Defines */ +#define QLA82XX_CRB_DRV_ACTIVE (QLA82XX_CAM_RAM(0x138)) +#define QLA82XX_CRB_DEV_STATE (QLA82XX_CAM_RAM(0x140)) +#define QLA82XX_CRB_DEV_PART_INFO (QLA82XX_CAM_RAM(0x14c)) +#define QLA82XX_CRB_DRV_IDC_VERSION (QLA82XX_CAM_RAM(0x174)) +#define QLA82XX_CRB_DRV_STATE (QLA82XX_CAM_RAM(0x144)) +#define QLA82XX_CRB_DRV_SCRATCH (QLA82XX_CAM_RAM(0x148)) +#define QLA82XX_CRB_DEV_PART_INFO (QLA82XX_CAM_RAM(0x14c)) + +/* Every driver should use these Device State */ +#define QLA82XX_DEV_COLD 1 +#define QLA82XX_DEV_INITIALIZING 2 +#define QLA82XX_DEV_READY 3 +#define QLA82XX_DEV_NEED_RESET 4 +#define QLA82XX_DEV_NEED_QUIESCENT 5 +#define QLA82XX_DEV_FAILED 6 +#define QLA82XX_DEV_QUIESCENT 7 + +#define QLA82XX_IDC_VERSION 1 +#define QLA82XX_ROM_DEV_INIT_TIMEOUT 30 +#define QLA82XX_ROM_DRV_RESET_ACK_TIMEOUT 10 + +#define QLA82XX_ROM_LOCK_ID (QLA82XX_CAM_RAM(0x100)) +#define QLA82XX_CRB_WIN_LOCK_ID (QLA82XX_CAM_RAM(0x124)) +#define QLA82XX_FW_VERSION_MAJOR (QLA82XX_CAM_RAM(0x150)) +#define QLA82XX_FW_VERSION_MINOR (QLA82XX_CAM_RAM(0x154)) +#define QLA82XX_FW_VERSION_SUB (QLA82XX_CAM_RAM(0x158)) +#define QLA82XX_PCIE_REG(reg) (QLA82XX_CRB_PCIE + (reg)) + +#define PCIE_CHICKEN3 (0x120c8) +#define PCIE_SETUP_FUNCTION (0x12040) +#define PCIE_SETUP_FUNCTION2 (0x12048) + +#define QLA82XX_PCIX_PS_REG(reg) (QLA82XX_CRB_PCIX_MD + (reg)) +#define QLA82XX_PCIX_PS2_REG(reg) (QLA82XX_CRB_PCIE2 + (reg)) + +#define PCIE_SEM2_LOCK (0x1c010) /* Flash lock */ +#define PCIE_SEM2_UNLOCK (0x1c014) /* Flash unlock */ +#define PCIE_SEM5_LOCK (0x1c028) /* Coexistence lock */ +#define PCIE_SEM5_UNLOCK (0x1c02c) /* Coexistence unlock */ +#define PCIE_SEM7_LOCK (0x1c038) /* crb win lock */ +#define PCIE_SEM7_UNLOCK (0x1c03c) /* crbwin unlock*/ + +/* Different drive state */ +#define QLA82XX_DRVST_NOT_RDY 0 +#define QLA82XX_DRVST_RST_RDY 1 +#define QLA82XX_DRVST_QSNT_RDY 2 + +/* + * The PCI VendorID and DeviceID for our board. + */ +#define PCI_DEVICE_ID_QLOGIC_ISP8021 0x8021 + +#define QLA82XX_MSIX_TBL_SPACE 8192 +#define QLA82XX_PCI_REG_MSIX_TBL 0x44 +#define QLA82XX_PCI_MSIX_CONTROL 0x40 + +struct crb_128M_2M_sub_block_map { + unsigned valid; + unsigned start_128M; + unsigned end_128M; + unsigned start_2M; +}; + +struct crb_128M_2M_block_map { + struct crb_128M_2M_sub_block_map sub_block[16]; +}; + +struct crb_addr_pair { + long addr; + long data; +}; + +#define ADDR_ERROR ((unsigned long) 0xffffffff) +#define MAX_CTL_CHECK 1000 + +/*************************************************************************** + * PCI related defines. + **************************************************************************/ + +/* + * Interrupt related defines. + */ +#define PCIX_TARGET_STATUS (0x10118) +#define PCIX_TARGET_STATUS_F1 (0x10160) +#define PCIX_TARGET_STATUS_F2 (0x10164) +#define PCIX_TARGET_STATUS_F3 (0x10168) +#define PCIX_TARGET_STATUS_F4 (0x10360) +#define PCIX_TARGET_STATUS_F5 (0x10364) +#define PCIX_TARGET_STATUS_F6 (0x10368) +#define PCIX_TARGET_STATUS_F7 (0x1036c) + +#define PCIX_TARGET_MASK (0x10128) +#define PCIX_TARGET_MASK_F1 (0x10170) +#define PCIX_TARGET_MASK_F2 (0x10174) +#define PCIX_TARGET_MASK_F3 (0x10178) +#define PCIX_TARGET_MASK_F4 (0x10370) +#define PCIX_TARGET_MASK_F5 (0x10374) +#define PCIX_TARGET_MASK_F6 (0x10378) +#define PCIX_TARGET_MASK_F7 (0x1037c) + +/* + * Message Signaled Interrupts + */ +#define PCIX_MSI_F0 (0x13000) +#define PCIX_MSI_F1 (0x13004) +#define PCIX_MSI_F2 (0x13008) +#define PCIX_MSI_F3 (0x1300c) +#define PCIX_MSI_F4 (0x13010) +#define PCIX_MSI_F5 (0x13014) +#define PCIX_MSI_F6 (0x13018) +#define PCIX_MSI_F7 (0x1301c) +#define PCIX_MSI_F(FUNC) (0x13000 + ((FUNC) * 4)) +#define PCIX_INT_VECTOR (0x10100) +#define PCIX_INT_MASK (0x10104) + +/* + * Interrupt state machine and other bits. + */ +#define PCIE_MISCCFG_RC (0x1206c) + +#define ISR_INT_TARGET_STATUS \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS)) +#define ISR_INT_TARGET_STATUS_F1 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F1)) +#define ISR_INT_TARGET_STATUS_F2 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F2)) +#define ISR_INT_TARGET_STATUS_F3 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F3)) +#define ISR_INT_TARGET_STATUS_F4 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F4)) +#define ISR_INT_TARGET_STATUS_F5 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F5)) +#define ISR_INT_TARGET_STATUS_F6 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F6)) +#define ISR_INT_TARGET_STATUS_F7 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_STATUS_F7)) + +#define ISR_INT_TARGET_MASK \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK)) +#define ISR_INT_TARGET_MASK_F1 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F1)) +#define ISR_INT_TARGET_MASK_F2 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F2)) +#define ISR_INT_TARGET_MASK_F3 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F3)) +#define ISR_INT_TARGET_MASK_F4 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F4)) +#define ISR_INT_TARGET_MASK_F5 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F5)) +#define ISR_INT_TARGET_MASK_F6 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F6)) +#define ISR_INT_TARGET_MASK_F7 \ + (QLA82XX_PCIX_PS_REG(PCIX_TARGET_MASK_F7)) + +#define ISR_INT_VECTOR \ + (QLA82XX_PCIX_PS_REG(PCIX_INT_VECTOR)) +#define ISR_INT_MASK \ + (QLA82XX_PCIX_PS_REG(PCIX_INT_MASK)) +#define ISR_INT_STATE_REG \ + (QLA82XX_PCIX_PS_REG(PCIE_MISCCFG_RC)) + +#define ISR_MSI_INT_TRIGGER(FUNC) \ + (QLA82XX_PCIX_PS_REG(PCIX_MSI_F(FUNC))) + +#define ISR_IS_LEGACY_INTR_IDLE(VAL) (((VAL) & 0x300) == 0) +#define ISR_IS_LEGACY_INTR_TRIGGERED(VAL) (((VAL) & 0x300) == 0x200) + +/* + * PCI Interrupt Vector Values. + */ +#define PCIX_INT_VECTOR_BIT_F0 0x0080 +#define PCIX_INT_VECTOR_BIT_F1 0x0100 +#define PCIX_INT_VECTOR_BIT_F2 0x0200 +#define PCIX_INT_VECTOR_BIT_F3 0x0400 +#define PCIX_INT_VECTOR_BIT_F4 0x0800 +#define PCIX_INT_VECTOR_BIT_F5 0x1000 +#define PCIX_INT_VECTOR_BIT_F6 0x2000 +#define PCIX_INT_VECTOR_BIT_F7 0x4000 + +struct qla82xx_legacy_intr_set { + uint32_t int_vec_bit; + uint32_t tgt_status_reg; + uint32_t tgt_mask_reg; + uint32_t pci_int_reg; +}; + +#define QLA82XX_LEGACY_INTR_CONFIG \ +{ \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F0, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(0) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F1, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F1, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F1, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(1) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F2, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F2, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F2, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(2) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F3, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F3, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F3, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(3) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F4, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F4, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F4, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(4) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F5, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F5, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F5, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(5) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F6, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F6, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F6, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(6) }, \ + \ + { \ + .int_vec_bit = PCIX_INT_VECTOR_BIT_F7, \ + .tgt_status_reg = ISR_INT_TARGET_STATUS_F7, \ + .tgt_mask_reg = ISR_INT_TARGET_MASK_F7, \ + .pci_int_reg = ISR_MSI_INT_TRIGGER(7) }, \ +} + +#define BOOTLD_START 0x10000 +#define IMAGE_START 0x100000 +#define FLASH_ADDR_START 0x43000 + +/* Magic number to let user know flash is programmed */ +#define QLA82XX_BDINFO_MAGIC 0x12345678 +#define FW_SIZE_OFFSET (0x3e840c) + +#define QLA82XX_IS_REVISION_P3PLUS(_rev_) ((_rev_) >= 0x50) +#define MIU_TEST_AGT_WRDATA_UPPER_LO (0x0b0) +#define MIU_TEST_AGT_WRDATA_UPPER_HI (0x0b4) + +#ifndef readq +static inline u64 readq(void __iomem *addr) +{ + return readl(addr) | (((u64) readl(addr + 4)) << 32LL); +} +#endif + +#ifndef writeq +static inline void writeq(u64 val, void __iomem *addr) +{ + writel(((u32) (val)), (addr)); + writel(((u32) (val >> 32)), (addr + 4)); +} +#endif + +/* Request and response queue size */ +#define REQUEST_ENTRY_CNT_82XX 128 /* Number of request entries. */ +#define RESPONSE_ENTRY_CNT_82XX 128 /* Number of response entries.*/ + +/* + * ISP 8021 I/O Register Set structure definitions. + */ +struct device_reg_82xx { + uint32_t req_q_out[64]; /* Request Queue out-Pointer (64 * 4) */ + uint32_t rsp_q_in[64]; /* Response Queue In-Pointer. */ + uint32_t rsp_q_out[64]; /* Response Queue Out-Pointer. */ + + uint16_t mailbox_in[32]; /* Mail box In registers */ + uint16_t unused_1[32]; + uint32_t hint; /* Host interrupt register */ +#define HINT_MBX_INT_PENDING BIT_0 + uint16_t unused_2[62]; + uint16_t mailbox_out[32]; /* Mail box Out registers */ + uint32_t unused_3[48]; + + uint32_t host_status; /* host status */ +#define HSRX_RISC_INT BIT_15 /* RISC to Host interrupt. */ +#define HSRX_RISC_PAUSED BIT_8 /* RISC Paused. */ + uint32_t host_int; /* Interrupt status. */ +#define ISRX_NX_RISC_INT BIT_0 /* RISC interrupt. */ +}; + +struct fcp_cmnd { + struct scsi_lun lun; + uint8_t crn; + uint8_t task_attribute; + uint8_t task_managment; + uint8_t additional_cdb_len; + uint8_t cdb[260]; /* 256 for CDB len and 4 for FCP_DL */ +}; + +struct dsd_dma { + struct list_head list; + dma_addr_t dsd_list_dma; + void *dsd_addr; +}; + +#define QLA_DSDS_PER_IOCB 37 +#define QLA_DSD_SIZE 12 +struct ct6_dsd { + uint16_t fcp_cmnd_len; + dma_addr_t fcp_cmnd_dma; + struct fcp_cmnd *fcp_cmnd; + int dsd_use_cnt; + struct list_head dsd_list; +}; + +#define MBC_TOGGLE_INTR 0x10 + +/* Flash offset */ +#define FLT_REG_BOOTLOAD_82XX 0x72 +#define FLT_REG_BOOT_CODE_82XX 0x78 +#define FLT_REG_FW_82XX 0x74 +#define FLT_REG_GOLD_FW_82XX 0x75 +#define FLT_REG_VPD_82XX 0x81 + +#define FA_VPD_SIZE_82XX 0x400 + +#define FA_FLASH_LAYOUT_ADDR_82 0xFC400 + +/****************************************************************************** +* +* Definitions specific to M25P flash +* +******************************************************************************* +* Instructions +*/ +#define M25P_INSTR_WREN 0x06 +#define M25P_INSTR_WRDI 0x04 +#define M25P_INSTR_RDID 0x9f +#define M25P_INSTR_RDSR 0x05 +#define M25P_INSTR_WRSR 0x01 +#define M25P_INSTR_READ 0x03 +#define M25P_INSTR_FAST_READ 0x0b +#define M25P_INSTR_PP 0x02 +#define M25P_INSTR_SE 0xd8 +#define M25P_INSTR_BE 0xc7 +#define M25P_INSTR_DP 0xb9 +#define M25P_INSTR_RES 0xab + +#endif diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index f31820691dc2..b1adeb71a8b0 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -29,6 +29,11 @@ char qla2x00_version_str[40]; */ static struct kmem_cache *srb_cachep; +/* + * CT6 CTX allocation cache + */ +static struct kmem_cache *ctx_cachep; + int ql2xlogintimeout = 20; module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xlogintimeout, @@ -65,6 +70,12 @@ MODULE_PARM_DESC(ql2xextended_error_logging, "Option to enable extended error logging, " "Default is 0 - no logging. 1 - log errors."); +int ql2xshiftctondsd = 6; +module_param(ql2xshiftctondsd, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xshiftctondsd, + "Set to control shifting of command type processing " + "based on total number of SG elements."); + static void qla2x00_free_device(scsi_qla_host_t *); int ql2xfdmienable=1; @@ -114,6 +125,21 @@ MODULE_PARM_DESC(ql2xetsenable, "Enables firmware ETS burst." "Default is 0 - skip ETS enablement."); +int ql2xdbwr; +module_param(ql2xdbwr, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xdbwr, + "Option to specify scheme for request queue posting\n" + " 0 -- Regular doorbell.\n" + " 1 -- CAMRAM doorbell (faster).\n"); + +int ql2xdontresethba; +module_param(ql2xdontresethba, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xdontresethba, + "Option to specify reset behaviour\n" + " 0 (Default) -- Reset on failure.\n" + " 1 -- Do not reset on failure.\n"); + + /* * SCSI host template entry points */ @@ -183,6 +209,10 @@ qla2x00_start_timer(scsi_qla_host_t *vha, void *func, unsigned long interval) static inline void qla2x00_restart_timer(scsi_qla_host_t *vha, unsigned long interval) { + /* Currently used for 82XX only. */ + if (vha->device_flags & DFLG_DEV_FAILED) + return; + mod_timer(&vha->timer, jiffies + interval * HZ); } @@ -739,7 +769,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (sp == NULL) continue; - if (sp->ctx) + if ((sp->ctx) && !(sp->flags & SRB_FCP_CMND_DMA_VALID)) continue; if (sp->cmd != cmd) continue; @@ -834,6 +864,24 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t, return status; } +void qla82xx_wait_for_pending_commands(scsi_qla_host_t *vha) +{ + int cnt; + srb_t *sp; + struct req_que *req = vha->req; + + DEBUG2(qla_printk(KERN_INFO, vha->hw, + "Waiting for pending commands\n")); + for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { + sp = req->outstanding_cmds[cnt]; + if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0, + sp, WAIT_HOST) == QLA_SUCCESS) { + DEBUG2(qla_printk(KERN_INFO, vha->hw, + "Done wait for pending commands\n")); + } + } +} + static char *reset_errors[] = { "HBA not online", "HBA not ready", @@ -1020,11 +1068,19 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) if (qla2x00_vp_abort_isp(vha)) goto eh_host_reset_lock; } else { + if (IS_QLA82XX(vha->hw)) { + if (!qla82xx_fcoe_ctx_reset(vha)) { + /* Ctx reset success */ + ret = SUCCESS; + goto eh_host_reset_lock; + } + /* fall thru if ctx reset failed */ + } if (ha->wq) flush_workqueue(ha->wq); set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); - if (qla2x00_abort_isp(base_vha)) { + if (ha->isp_ops->abort_isp(base_vha)) { clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); /* failed. schedule dpc to try */ set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); @@ -1078,7 +1134,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha) } } - if (ha->flags.enable_lip_full_login && !IS_QLA81XX(ha)) { + if (ha->flags.enable_lip_full_login && !IS_QLA8XXX_TYPE(ha)) { ret = qla2x00_full_login_lip(vha); if (ret != QLA_SUCCESS) { DEBUG2_3(printk("%s(%ld): failed: " @@ -1125,7 +1181,8 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) sp = req->outstanding_cmds[cnt]; if (sp) { req->outstanding_cmds[cnt] = NULL; - if (!sp->ctx) { + if (!sp->ctx || + (sp->flags & SRB_FCP_CMND_DMA_VALID)) { sp->cmd->result = res; qla2x00_sp_compl(ha, sp); } else { @@ -1387,6 +1444,7 @@ static struct isp_operations qla2100_isp_ops = { .write_optrom = qla2x00_write_optrom_data, .get_flash_version = qla2x00_get_flash_version, .start_scsi = qla2x00_start_scsi, + .abort_isp = qla2x00_abort_isp, }; static struct isp_operations qla2300_isp_ops = { @@ -1422,6 +1480,7 @@ static struct isp_operations qla2300_isp_ops = { .write_optrom = qla2x00_write_optrom_data, .get_flash_version = qla2x00_get_flash_version, .start_scsi = qla2x00_start_scsi, + .abort_isp = qla2x00_abort_isp, }; static struct isp_operations qla24xx_isp_ops = { @@ -1457,6 +1516,7 @@ static struct isp_operations qla24xx_isp_ops = { .write_optrom = qla24xx_write_optrom_data, .get_flash_version = qla24xx_get_flash_version, .start_scsi = qla24xx_start_scsi, + .abort_isp = qla2x00_abort_isp, }; static struct isp_operations qla25xx_isp_ops = { @@ -1492,6 +1552,7 @@ static struct isp_operations qla25xx_isp_ops = { .write_optrom = qla24xx_write_optrom_data, .get_flash_version = qla24xx_get_flash_version, .start_scsi = qla24xx_start_scsi, + .abort_isp = qla2x00_abort_isp, }; static struct isp_operations qla81xx_isp_ops = { @@ -1527,6 +1588,43 @@ static struct isp_operations qla81xx_isp_ops = { .write_optrom = qla24xx_write_optrom_data, .get_flash_version = qla24xx_get_flash_version, .start_scsi = qla24xx_start_scsi, + .abort_isp = qla2x00_abort_isp, +}; + +static struct isp_operations qla82xx_isp_ops = { + .pci_config = qla82xx_pci_config, + .reset_chip = qla82xx_reset_chip, + .chip_diag = qla24xx_chip_diag, + .config_rings = qla82xx_config_rings, + .reset_adapter = qla24xx_reset_adapter, + .nvram_config = qla81xx_nvram_config, + .update_fw_options = qla24xx_update_fw_options, + .load_risc = qla82xx_load_risc, + .pci_info_str = qla82xx_pci_info_str, + .fw_version_str = qla24xx_fw_version_str, + .intr_handler = qla82xx_intr_handler, + .enable_intrs = qla82xx_enable_intrs, + .disable_intrs = qla82xx_disable_intrs, + .abort_command = qla24xx_abort_command, + .target_reset = qla24xx_abort_target, + .lun_reset = qla24xx_lun_reset, + .fabric_login = qla24xx_login_fabric, + .fabric_logout = qla24xx_fabric_logout, + .calc_req_entries = NULL, + .build_iocbs = NULL, + .prep_ms_iocb = qla24xx_prep_ms_iocb, + .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb, + .read_nvram = qla24xx_read_nvram_data, + .write_nvram = qla24xx_write_nvram_data, + .fw_dump = qla24xx_fw_dump, + .beacon_on = qla24xx_beacon_on, + .beacon_off = qla24xx_beacon_off, + .beacon_blink = qla24xx_beacon_blink, + .read_optrom = qla82xx_read_optrom_data, + .write_optrom = qla82xx_write_optrom_data, + .get_flash_version = qla24xx_get_flash_version, + .start_scsi = qla82xx_start_scsi, + .abort_isp = qla82xx_abort_isp, }; static inline void @@ -1615,10 +1713,22 @@ qla2x00_set_isp_flags(struct qla_hw_data *ha) ha->device_type |= DT_IIDMA; ha->fw_srisc_address = RISC_START_ADDRESS_2400; break; + case PCI_DEVICE_ID_QLOGIC_ISP8021: + ha->device_type |= DT_ISP8021; + ha->device_type |= DT_ZIO_SUPPORTED; + ha->device_type |= DT_FWI2; + ha->fw_srisc_address = RISC_START_ADDRESS_2400; + /* Initialize 82XX ISP flags */ + qla82xx_init_flags(ha); + break; } - /* Get adapter physical port no from interrupt pin register. */ - pci_read_config_byte(ha->pdev, PCI_INTERRUPT_PIN, &ha->port_no); + if (IS_QLA82XX(ha)) + ha->port_no = !(ha->portnum & 1); + else + /* Get adapter physical port no from interrupt pin register. */ + pci_read_config_byte(ha->pdev, PCI_INTERRUPT_PIN, &ha->port_no); + if (ha->port_no & 1) ha->flags.port0 = 1; else @@ -1632,6 +1742,9 @@ qla2x00_iospace_config(struct qla_hw_data *ha) uint16_t msix; int cpus; + if (IS_QLA82XX(ha)) + return qla82xx_iospace_config(ha); + if (pci_request_selected_regions(ha->pdev, ha->bars, QLA2XXX_DRIVER_NAME)) { qla_printk(KERN_WARNING, ha, @@ -1775,7 +1888,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 || pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 || pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532 || - pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8001) { + pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8001 || + pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8021) { bars = pci_select_bars(pdev, IORESOURCE_MEM); mem_only = 1; } @@ -1905,6 +2019,19 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX; ha->nvram_conf_off = ~0; ha->nvram_data_off = ~0; + } else if (IS_QLA82XX(ha)) { + ha->mbx_count = MAILBOX_REGISTER_COUNT; + req_length = REQUEST_ENTRY_CNT_82XX; + rsp_length = RESPONSE_ENTRY_CNT_82XX; + ha->max_loop_id = SNS_LAST_LOOP_ID_2300; + ha->init_cb_size = sizeof(struct mid_init_cb_81xx); + ha->gid_list_info_size = 8; + ha->optrom_size = OPTROM_SIZE_82XX; + ha->isp_ops = &qla82xx_isp_ops; + ha->flash_conf_off = FARX_ACCESS_FLASH_CONF; + ha->flash_data_off = FARX_ACCESS_FLASH_DATA; + ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF; + ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA; } mutex_init(&ha->vport_lock); @@ -1977,6 +2104,7 @@ que_init: " pointers\n"); goto probe_init_failed; } + ha->rsp_q_map[0] = rsp; ha->req_q_map[0] = req; rsp->req = req; @@ -1995,6 +2123,12 @@ que_init: rsp->rsp_q_out = &ha->mqiobase->isp25mq.rsp_q_out; } + if (IS_QLA82XX(ha)) { + req->req_q_out = &ha->iobase->isp82.req_q_out[0]; + rsp->rsp_q_in = &ha->iobase->isp82.rsp_q_in[0]; + rsp->rsp_q_out = &ha->iobase->isp82.rsp_q_out[0]; + } + if (qla2x00_initialize_adapter(base_vha)) { qla_printk(KERN_WARNING, ha, "Failed to initialize adapter\n"); @@ -2003,6 +2137,14 @@ que_init: "Adapter flags %x.\n", base_vha->host_no, base_vha->device_flags)); + if (IS_QLA82XX(ha)) { + qla82xx_idc_lock(ha); + qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_FAILED); + qla82xx_idc_unlock(ha); + qla_printk(KERN_INFO, ha, "HW State: FAILED\n"); + } + ret = -ENODEV; goto probe_failed; } @@ -2041,6 +2183,8 @@ skip_dpc: DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n", base_vha->host_no, ha)); + ha->isp_ops->enable_intrs(ha); + ret = scsi_add_host(host, &pdev->dev); if (ret) goto probe_failed; @@ -2048,8 +2192,6 @@ skip_dpc: base_vha->flags.init_done = 1; base_vha->flags.online = 1; - ha->isp_ops->enable_intrs(ha); - scsi_scan_host(host); qla2x00_alloc_sysfs_attr(base_vha); @@ -2091,9 +2233,17 @@ probe_failed: scsi_host_put(base_vha->host); probe_hw_failed: - if (ha->iobase) - iounmap(ha->iobase); - + if (IS_QLA82XX(ha)) { + qla82xx_idc_lock(ha); + qla82xx_clear_drv_active(ha); + qla82xx_idc_unlock(ha); + iounmap((device_reg_t __iomem *)ha->nx_pcibase); + if (!ql2xdbwr) + iounmap((device_reg_t __iomem *)ha->nxdb_wr_ptr); + } else { + if (ha->iobase) + iounmap(ha->iobase); + } pci_release_selected_regions(ha->pdev, ha->bars); kfree(ha); ha = NULL; @@ -2160,11 +2310,17 @@ qla2x00_remove_one(struct pci_dev *pdev) scsi_host_put(base_vha->host); - if (ha->iobase) - iounmap(ha->iobase); + if (IS_QLA82XX(ha)) { + iounmap((device_reg_t __iomem *)ha->nx_pcibase); + if (!ql2xdbwr) + iounmap((device_reg_t __iomem *)ha->nxdb_wr_ptr); + } else { + if (ha->iobase) + iounmap(ha->iobase); - if (ha->mqiobase) - iounmap(ha->mqiobase); + if (ha->mqiobase) + iounmap(ha->mqiobase); + } pci_release_selected_regions(ha->pdev, ha->bars); kfree(ha); @@ -2213,8 +2369,10 @@ qla2x00_free_device(scsi_qla_host_t *vha) vha->flags.online = 0; /* turn-off interrupts on the card */ - if (ha->interrupts_on) + if (ha->interrupts_on) { + vha->flags.init_done = 0; ha->isp_ops->disable_intrs(ha); + } qla2x00_free_irqs(vha); @@ -2359,10 +2517,25 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, if (!ha->srb_mempool) goto fail_free_gid_list; + if (IS_QLA82XX(ha)) { + /* Allocate cache for CT6 Ctx. */ + if (!ctx_cachep) { + ctx_cachep = kmem_cache_create("qla2xxx_ctx", + sizeof(struct ct6_dsd), 0, + SLAB_HWCACHE_ALIGN, NULL); + if (!ctx_cachep) + goto fail_free_gid_list; + } + ha->ctx_mempool = mempool_create_slab_pool(SRB_MIN_REQ, + ctx_cachep); + if (!ha->ctx_mempool) + goto fail_free_srb_mempool; + } + /* Get memory for cached NVRAM */ ha->nvram = kzalloc(MAX_NVRAM_SIZE, GFP_KERNEL); if (!ha->nvram) - goto fail_free_srb_mempool; + goto fail_free_ctx_mempool; snprintf(name, sizeof(name), "%s_%d", QLA2XXX_DRIVER_NAME, ha->pdev->device); @@ -2371,6 +2544,24 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, if (!ha->s_dma_pool) goto fail_free_nvram; + if (IS_QLA82XX(ha)) { + ha->dl_dma_pool = dma_pool_create(name, &ha->pdev->dev, + DSD_LIST_DMA_POOL_SIZE, 8, 0); + if (!ha->dl_dma_pool) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - dl_dma_pool\n"); + goto fail_s_dma_pool; + } + + ha->fcp_cmnd_dma_pool = dma_pool_create(name, &ha->pdev->dev, + FCP_CMND_DMA_POOL_SIZE, 8, 0); + if (!ha->fcp_cmnd_dma_pool) { + qla_printk(KERN_WARNING, ha, + "Memory Allocation failed - fcp_cmnd_dma_pool\n"); + goto fail_dl_dma_pool; + } + } + /* Allocate memory for SNS commands */ if (IS_QLA2100(ha) || IS_QLA2200(ha)) { /* Get consistent memory allocated for SNS commands */ @@ -2437,13 +2628,15 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, ha->npiv_info = NULL; /* Get consistent memory allocated for EX-INIT-CB. */ - if (IS_QLA81XX(ha)) { + if (IS_QLA8XXX_TYPE(ha)) { ha->ex_init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &ha->ex_init_cb_dma); if (!ha->ex_init_cb) goto fail_ex_init_cb; } + INIT_LIST_HEAD(&ha->gbl_dsd_list); + INIT_LIST_HEAD(&ha->vp_list); return 1; @@ -2473,11 +2666,24 @@ fail_free_ms_iocb: ha->ms_iocb = NULL; ha->ms_iocb_dma = 0; fail_dma_pool: + if (IS_QLA82XX(ha)) { + dma_pool_destroy(ha->fcp_cmnd_dma_pool); + ha->fcp_cmnd_dma_pool = NULL; + } +fail_dl_dma_pool: + if (IS_QLA82XX(ha)) { + dma_pool_destroy(ha->dl_dma_pool); + ha->dl_dma_pool = NULL; + } +fail_s_dma_pool: dma_pool_destroy(ha->s_dma_pool); ha->s_dma_pool = NULL; fail_free_nvram: kfree(ha->nvram); ha->nvram = NULL; +fail_free_ctx_mempool: + mempool_destroy(ha->ctx_mempool); + ha->ctx_mempool = NULL; fail_free_srb_mempool: mempool_destroy(ha->srb_mempool); ha->srb_mempool = NULL; @@ -2546,7 +2752,8 @@ qla2x00_mem_free(struct qla_hw_data *ha) dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma); if (ha->ex_init_cb) - dma_pool_free(ha->s_dma_pool, ha->ex_init_cb, ha->ex_init_cb_dma); + dma_pool_free(ha->s_dma_pool, + ha->ex_init_cb, ha->ex_init_cb_dma); if (ha->s_dma_pool) dma_pool_destroy(ha->s_dma_pool); @@ -2555,14 +2762,39 @@ qla2x00_mem_free(struct qla_hw_data *ha) dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list, ha->gid_list_dma); + if (IS_QLA82XX(ha)) { + if (!list_empty(&ha->gbl_dsd_list)) { + struct dsd_dma *dsd_ptr, *tdsd_ptr; + + /* clean up allocated prev pool */ + list_for_each_entry_safe(dsd_ptr, + tdsd_ptr, &ha->gbl_dsd_list, list) { + dma_pool_free(ha->dl_dma_pool, + dsd_ptr->dsd_addr, dsd_ptr->dsd_list_dma); + list_del(&dsd_ptr->list); + kfree(dsd_ptr); + } + } + } + + if (ha->dl_dma_pool) + dma_pool_destroy(ha->dl_dma_pool); + + if (ha->fcp_cmnd_dma_pool) + dma_pool_destroy(ha->fcp_cmnd_dma_pool); + + if (ha->ctx_mempool) + mempool_destroy(ha->ctx_mempool); + if (ha->init_cb) dma_free_coherent(&ha->pdev->dev, ha->init_cb_size, - ha->init_cb, ha->init_cb_dma); + ha->init_cb, ha->init_cb_dma); vfree(ha->optrom_buffer); kfree(ha->nvram); kfree(ha->npiv_info); ha->srb_mempool = NULL; + ha->ctx_mempool = NULL; ha->eft = NULL; ha->eft_dma = 0; ha->sns_cmd = NULL; @@ -2577,6 +2809,8 @@ qla2x00_mem_free(struct qla_hw_data *ha) ha->ex_init_cb_dma = 0; ha->s_dma_pool = NULL; + ha->dl_dma_pool = NULL; + ha->fcp_cmnd_dma_pool = NULL; ha->gid_list = NULL; ha->gid_list_dma = 0; @@ -2904,6 +3138,45 @@ qla2x00_do_dpc(void *data) qla2x00_do_work(base_vha); + if (IS_QLA82XX(ha)) { + if (test_and_clear_bit(ISP_UNRECOVERABLE, + &base_vha->dpc_flags)) { + qla82xx_idc_lock(ha); + qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_FAILED); + qla82xx_idc_unlock(ha); + qla_printk(KERN_INFO, ha, + "HW State: FAILED\n"); + qla82xx_device_state_handler(base_vha); + continue; + } + + if (test_and_clear_bit(FCOE_CTX_RESET_NEEDED, + &base_vha->dpc_flags)) { + + DEBUG(printk(KERN_INFO + "scsi(%ld): dpc: sched " + "qla82xx_fcoe_ctx_reset ha = %p\n", + base_vha->host_no, ha)); + if (!(test_and_set_bit(ABORT_ISP_ACTIVE, + &base_vha->dpc_flags))) { + if (qla82xx_fcoe_ctx_reset(base_vha)) { + /* FCoE-ctx reset failed. + * Escalate to chip-reset + */ + set_bit(ISP_ABORT_NEEDED, + &base_vha->dpc_flags); + } + clear_bit(ABORT_ISP_ACTIVE, + &base_vha->dpc_flags); + } + + DEBUG(printk("scsi(%ld): dpc:" + " qla82xx_fcoe_ctx_reset end\n", + base_vha->host_no)); + } + } + if (test_and_clear_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) { @@ -2913,7 +3186,7 @@ qla2x00_do_dpc(void *data) if (!(test_and_set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags))) { - if (qla2x00_abort_isp(base_vha)) { + if (ha->isp_ops->abort_isp(base_vha)) { /* failed. retry later */ set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); @@ -3061,8 +3334,18 @@ qla2x00_sp_compl(struct qla_hw_data *ha, srb_t *sp) qla2x00_sp_free_dma(sp); - mempool_free(sp, ha->srb_mempool); + if (sp->flags & SRB_FCP_CMND_DMA_VALID) { + struct ct6_dsd *ctx = sp->ctx; + dma_pool_free(ha->fcp_cmnd_dma_pool, ctx->fcp_cmnd, + ctx->fcp_cmnd_dma); + list_splice(&ctx->dsd_list, &ha->gbl_dsd_list); + ha->gbl_dsd_inuse -= ctx->dsd_use_cnt; + ha->gbl_dsd_avail += ctx->dsd_use_cnt; + mempool_free(sp->ctx, ha->ctx_mempool); + sp->ctx = NULL; + } + mempool_free(sp, ha->srb_mempool); cmd->scsi_done(cmd); } @@ -3087,6 +3370,9 @@ qla2x00_timer(scsi_qla_host_t *vha) struct qla_hw_data *ha = vha->hw; struct req_que *req; + if (IS_QLA82XX(ha)) + qla82xx_watchdog(vha); + /* Hardware read to raise pending EEH errors during mailbox waits. */ if (!pci_channel_offline(ha->pdev)) pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w); @@ -3201,6 +3487,8 @@ qla2x00_timer(scsi_qla_host_t *vha) start_dpc || test_bit(RESET_MARKER_NEEDED, &vha->dpc_flags) || test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags) || + test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags) || + test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) || test_bit(VP_DPC_NEEDED, &vha->dpc_flags) || test_bit(RELOGIN_NEEDED, &vha->dpc_flags))) qla2xxx_wake_dpc(vha); @@ -3210,7 +3498,7 @@ qla2x00_timer(scsi_qla_host_t *vha) /* Firmware interface routines. */ -#define FW_BLOBS 7 +#define FW_BLOBS 8 #define FW_ISP21XX 0 #define FW_ISP22XX 1 #define FW_ISP2300 2 @@ -3218,6 +3506,7 @@ qla2x00_timer(scsi_qla_host_t *vha) #define FW_ISP24XX 4 #define FW_ISP25XX 5 #define FW_ISP81XX 6 +#define FW_ISP82XX 7 #define FW_FILE_ISP21XX "ql2100_fw.bin" #define FW_FILE_ISP22XX "ql2200_fw.bin" @@ -3226,6 +3515,7 @@ qla2x00_timer(scsi_qla_host_t *vha) #define FW_FILE_ISP24XX "ql2400_fw.bin" #define FW_FILE_ISP25XX "ql2500_fw.bin" #define FW_FILE_ISP81XX "ql8100_fw.bin" +#define FW_FILE_ISP82XX "ql8200_fw.bin" static DEFINE_MUTEX(qla_fw_lock); @@ -3237,6 +3527,7 @@ static struct fw_blob qla_fw_blobs[FW_BLOBS] = { { .name = FW_FILE_ISP24XX, }, { .name = FW_FILE_ISP25XX, }, { .name = FW_FILE_ISP81XX, }, + { .name = FW_FILE_ISP82XX, }, }; struct fw_blob * @@ -3260,6 +3551,8 @@ qla2x00_request_firmware(scsi_qla_host_t *vha) blob = &qla_fw_blobs[FW_ISP25XX]; } else if (IS_QLA81XX(ha)) { blob = &qla_fw_blobs[FW_ISP81XX]; + } else if (IS_QLA82XX(ha)) { + blob = &qla_fw_blobs[FW_ISP82XX]; } mutex_lock(&qla_fw_lock); @@ -3400,7 +3693,7 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev) msleep(1000); set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); - if (qla2x00_abort_isp(base_vha) == QLA_SUCCESS) + if (ha->isp_ops->abort_isp(base_vha) == QLA_SUCCESS) ret = PCI_ERS_RESULT_RECOVERED; clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); @@ -3453,6 +3746,7 @@ static struct pci_device_id qla2xxx_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) }, { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) }, { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8001) }, + { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8021) }, { 0 }, }; MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl); @@ -3524,6 +3818,8 @@ qla2x00_module_exit(void) pci_unregister_driver(&qla2xxx_pci_driver); qla2x00_release_firmware(); kmem_cache_destroy(srb_cachep); + if (ctx_cachep) + kmem_cache_destroy(ctx_cachep); fc_release_transport(qla2xxx_transport_template); fc_release_transport(qla2xxx_transport_vport_template); } diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index e74552c8c5e1..de92504d7585 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -423,9 +423,6 @@ qla2x00_set_nvram_protection(struct qla_hw_data *ha, int stat) /* Flash Manipulation Routines */ /*****************************************************************************/ -#define OPTROM_BURST_SIZE 0x1000 -#define OPTROM_BURST_DWORDS (OPTROM_BURST_SIZE / 4) - static inline uint32_t flash_conf_addr(struct qla_hw_data *ha, uint32_t faddr) { @@ -565,6 +562,10 @@ qla2xxx_find_flt_start(scsi_qla_host_t *vha, uint32_t *start) *start = FA_FLASH_LAYOUT_ADDR; else if (IS_QLA81XX(ha)) *start = FA_FLASH_LAYOUT_ADDR_81; + else if (IS_QLA82XX(ha)) { + *start = FA_FLASH_LAYOUT_ADDR_82; + goto end; + } /* Begin with first PCI expansion ROM header. */ buf = (uint8_t *)req->ring; dcode = (uint32_t *)req->ring; @@ -709,10 +710,14 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) break; case FLT_REG_VPD_0: ha->flt_region_vpd_nvram = start; + if (IS_QLA82XX(ha)) + break; if (ha->flags.port0) ha->flt_region_vpd = start; break; case FLT_REG_VPD_1: + if (IS_QLA82XX(ha)) + break; if (!ha->flags.port0) ha->flt_region_vpd = start; break; @@ -746,6 +751,21 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) if (!ha->flags.port0) ha->flt_region_fcp_prio = start; break; + case FLT_REG_BOOT_CODE_82XX: + ha->flt_region_boot = start; + break; + case FLT_REG_FW_82XX: + ha->flt_region_fw = start; + break; + case FLT_REG_GOLD_FW_82XX: + ha->flt_region_gold_fw = start; + break; + case FLT_REG_BOOTLOAD_82XX: + ha->flt_region_bootload = start; + break; + case FLT_REG_VPD_82XX: + ha->flt_region_vpd = start; + break; } } goto done; @@ -791,7 +811,7 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *vha) uint16_t *wptr; struct qla_fdt_layout *fdt; uint8_t man_id, flash_id; - uint16_t mid, fid; + uint16_t mid = 0, fid = 0; struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; @@ -832,6 +852,10 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *vha) goto done; no_flash_data: loc = locations[0]; + if (IS_QLA82XX(ha)) { + ha->fdt_block_size = FLASH_BLK_SIZE_64K; + goto done; + } qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id); mid = man_id; fid = flash_id; @@ -869,6 +893,31 @@ done: ha->fdt_block_size)); } +static void +qla2xxx_get_idc_param(scsi_qla_host_t *vha) +{ +#define QLA82XX_IDC_PARAM_ADDR 0x003e885c + uint32_t *wptr; + struct qla_hw_data *ha = vha->hw; + struct req_que *req = ha->req_q_map[0]; + + if (!IS_QLA82XX(ha)) + return; + + wptr = (uint32_t *)req->ring; + ha->isp_ops->read_optrom(vha, (uint8_t *)req->ring, + QLA82XX_IDC_PARAM_ADDR , 8); + + if (*wptr == __constant_cpu_to_le32(0xffffffff)) { + ha->nx_dev_init_timeout = QLA82XX_ROM_DEV_INIT_TIMEOUT; + ha->nx_reset_timeout = QLA82XX_ROM_DRV_RESET_ACK_TIMEOUT; + } else { + ha->nx_dev_init_timeout = le32_to_cpu(*wptr++); + ha->nx_reset_timeout = le32_to_cpu(*wptr); + } + return; +} + int qla2xxx_get_flash_info(scsi_qla_host_t *vha) { @@ -876,7 +925,7 @@ qla2xxx_get_flash_info(scsi_qla_host_t *vha) uint32_t flt_addr; struct qla_hw_data *ha = vha->hw; - if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA81XX(ha)) + if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA8XXX_TYPE(ha)) return QLA_SUCCESS; ret = qla2xxx_find_flt_start(vha, &flt_addr); @@ -885,6 +934,7 @@ qla2xxx_get_flash_info(scsi_qla_host_t *vha) qla2xxx_get_flt_info(vha, flt_addr); qla2xxx_get_fdt_info(vha); + qla2xxx_get_idc_param(vha); return QLA_SUCCESS; } @@ -901,7 +951,7 @@ qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha) struct qla_npiv_entry *entry; struct qla_hw_data *ha = vha->hw; - if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA81XX(ha)) + if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA8XXX_TYPE(ha)) return; ha->isp_ops->read_optrom(vha, (uint8_t *)&hdr, @@ -1194,6 +1244,9 @@ qla24xx_read_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr, uint32_t *dwptr; struct qla_hw_data *ha = vha->hw; + if (IS_QLA82XX(ha)) + return buf; + /* Dword reads to flash. */ dwptr = (uint32_t *)buf; for (i = 0; i < bytes >> 2; i++, naddr++) @@ -1249,6 +1302,9 @@ qla24xx_write_nvram_data(scsi_qla_host_t *vha, uint8_t *buf, uint32_t naddr, ret = QLA_SUCCESS; + if (IS_QLA82XX(ha)) + return ret; + /* Enable flash write. */ WRT_REG_DWORD(®->ctrl_status, RD_REG_DWORD(®->ctrl_status) | CSRX_FLASH_ENABLE); @@ -1360,6 +1416,9 @@ qla2x00_beacon_blink(struct scsi_qla_host *vha) struct qla_hw_data *ha = vha->hw; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + if (IS_QLA82XX(ha)) + return; + spin_lock_irqsave(&ha->hardware_lock, flags); /* Save the Original GPIOE. */ @@ -1541,6 +1600,9 @@ qla24xx_beacon_on(struct scsi_qla_host *vha) struct qla_hw_data *ha = vha->hw; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + if (IS_QLA82XX(ha)) + return QLA_SUCCESS; + if (ha->beacon_blink_led == 0) { /* Enable firmware for update */ ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL; @@ -1583,6 +1645,9 @@ qla24xx_beacon_off(struct scsi_qla_host *vha) struct qla_hw_data *ha = vha->hw; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + if (IS_QLA82XX(ha)) + return QLA_SUCCESS; + ha->beacon_blink_led = 0; ha->beacon_color_state = QLA_LED_ALL_ON; @@ -2592,6 +2657,9 @@ qla24xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf) int i; struct qla_hw_data *ha = vha->hw; + if (IS_QLA82XX(ha)) + return ret; + if (!mbuf) return QLA_FUNCTION_FAILED; -- cgit v1.2.2 From 8637ac3340eca9d01f056f81c10fd61d15d2f5ee Mon Sep 17 00:00:00 2001 From: Jing Huang Date: Tue, 13 Apr 2010 12:22:29 -0700 Subject: [SCSI] bfa: fix compilation warning in powerpc Fix the compilation warning in powerpc. The same change also fixes endian issue we found in powerpc test. This patch has been tested in x86 and powerpc platform. it is created using scsi-misc-2.6. Signed-off-by: Jing Huang Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfa_os_inc.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/bfa/bfa_os_inc.h b/drivers/scsi/bfa/bfa_os_inc.h index 4eb1330d5b30..bd1cd3ee3022 100644 --- a/drivers/scsi/bfa/bfa_os_inc.h +++ b/drivers/scsi/bfa/bfa_os_inc.h @@ -176,12 +176,12 @@ int bfa_os_MWB(void *); #define bfa_os_addr_t char __iomem * #define bfa_os_panic() -#define bfa_os_reg_read(_raddr) bfa_os_wtole(readl(_raddr)) -#define bfa_os_reg_write(_raddr, _val) writel(bfa_os_wtole((_val)), (_raddr)) +#define bfa_os_reg_read(_raddr) readl(_raddr) +#define bfa_os_reg_write(_raddr, _val) writel((_val), (_raddr)) #define bfa_os_mem_read(_raddr, _off) \ - bfa_os_ntohl(readl(((_raddr) + (_off)))) + bfa_os_swap32(readl(((_raddr) + (_off)))) #define bfa_os_mem_write(_raddr, _off, _val) \ - writel(bfa_os_htonl((_val)), ((_raddr) + (_off))) + writel(bfa_os_swap32((_val)), ((_raddr) + (_off))) #define BFA_TRC_TS(_trcm) \ ({ \ -- cgit v1.2.2 From 160e7f671344e40b86663a8913e175a3bb5d7f84 Mon Sep 17 00:00:00 2001 From: Tomohiro Kusumi Date: Wed, 14 Apr 2010 15:15:14 +0900 Subject: [SCSI] fix sdev_rw_attr macro for scsi device sysfs entries This patch fixes sdev_rw_attr() macro for scsi device sysfs entries. It seems there is no such function snscanf in the current linux kernel, so it fails to compile scsi driver when someone try to add a new rw entry. This has been unfixed for a long time probably because current scsi device has no rw entries. # grep snscanf . -rn ./drivers/scsi/scsi_sysfs.c:489: snscanf (buf, 20, format_string, &sdev->field); \ Signed-off-by: Tomohiro Kusumi Signed-off-by: James Bottomley --- drivers/scsi/scsi_sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 838a0db8ea1f..c23ab978c3ba 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -474,7 +474,7 @@ static DEVICE_ATTR(field, S_IRUGO, sdev_show_##field, NULL); /* - * sdev_rd_attr: create a function and attribute variable for a + * sdev_rw_attr: create a function and attribute variable for a * read/write field. */ #define sdev_rw_attr(field, format_string) \ @@ -486,7 +486,7 @@ sdev_store_##field (struct device *dev, struct device_attribute *attr, \ { \ struct scsi_device *sdev; \ sdev = to_scsi_device(dev); \ - snscanf (buf, 20, format_string, &sdev->field); \ + sscanf (buf, format_string, &sdev->field); \ return count; \ } \ static DEVICE_ATTR(field, S_IRUGO | S_IWUSR, sdev_show_##field, sdev_store_##field); -- cgit v1.2.2 From 859e816704b4139d15b1ec6a3505f12faef5333a Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Fri, 16 Apr 2010 13:28:41 -0500 Subject: [SCSI] hpsa: remove unneeded defines This patch removes unnecessary #define's from hpsa. The SCSI midlayer handles all this for us. Signed-off-by: Mike Miller Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 8 -------- drivers/scsi/hpsa_cmd.h | 15 --------------- 2 files changed, 23 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 183d3a43c280..c016426b31b2 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -2708,14 +2708,6 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, c->Request.CDB[8] = (size >> 8) & 0xFF; c->Request.CDB[9] = size & 0xFF; break; - - case HPSA_READ_CAPACITY: - c->Request.CDBLen = 10; - c->Request.Type.Attribute = ATTR_SIMPLE; - c->Request.Type.Direction = XFER_READ; - c->Request.Timeout = 0; - c->Request.CDB[0] = cmd; - break; case HPSA_CACHE_FLUSH: c->Request.CDBLen = 12; c->Request.Type.Attribute = ATTR_SIMPLE; diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index 56fb9827681e..78de9b6d1e0b 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -152,21 +152,6 @@ struct SenseSubsystem_info { u8 reserved1[1108]; }; -#define HPSA_READ_CAPACITY 0x25 /* Read Capacity */ -struct ReadCapdata { - u8 total_size[4]; /* Total size in blocks */ - u8 block_size[4]; /* Size of blocks in bytes */ -}; - -#if 0 -/* 12 byte commands not implemented in firmware yet. */ -#define HPSA_READ 0xa8 -#define HPSA_WRITE 0xaa -#endif - -#define HPSA_READ 0x28 /* Read(10) */ -#define HPSA_WRITE 0x2a /* Write(10) */ - /* BMIC commands */ #define BMIC_READ 0x26 #define BMIC_WRITE 0x27 -- cgit v1.2.2 From f5832fa2f8dc39adcf3ae348d2d6383163235e79 Mon Sep 17 00:00:00 2001 From: Brian King Date: Tue, 20 Apr 2010 14:21:33 -0500 Subject: [SCSI] ibmvfc: Fix command completion handling Commands which are completed by the VIOS are placed on a CRQ in kernel memory for the ibmvfc driver to process. Each CRQ entry is 16 bytes. The ibmvfc driver reads the first 8 bytes to check if the entry is valid, then reads the next 8 bytes to get the handle, which is a pointer the completed command. This fixes an issue seen on Power 7 where the processor reordered the loads from memory, resulting in processing command completion with a stale handle. This could result in command timeouts, and also early completion of commands. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvfc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index c2eea711a5ce..9372169374e2 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -3013,6 +3013,7 @@ static struct ibmvfc_async_crq *ibmvfc_next_async_crq(struct ibmvfc_host *vhost) if (crq->valid & 0x80) { if (++async_crq->cur == async_crq->size) async_crq->cur = 0; + rmb(); } else crq = NULL; @@ -3035,6 +3036,7 @@ static struct ibmvfc_crq *ibmvfc_next_crq(struct ibmvfc_host *vhost) if (crq->valid & 0x80) { if (++queue->cur == queue->size) queue->cur = 0; + rmb(); } else crq = NULL; @@ -3083,12 +3085,14 @@ static void ibmvfc_tasklet(void *data) while ((async = ibmvfc_next_async_crq(vhost)) != NULL) { ibmvfc_handle_async(async, vhost); async->valid = 0; + wmb(); } /* Pull all the valid messages off the CRQ */ while ((crq = ibmvfc_next_crq(vhost)) != NULL) { ibmvfc_handle_crq(crq, vhost); crq->valid = 0; + wmb(); } vio_enable_interrupts(vdev); @@ -3096,10 +3100,12 @@ static void ibmvfc_tasklet(void *data) vio_disable_interrupts(vdev); ibmvfc_handle_async(async, vhost); async->valid = 0; + wmb(); } else if ((crq = ibmvfc_next_crq(vhost)) != NULL) { vio_disable_interrupts(vdev); ibmvfc_handle_crq(crq, vhost); crq->valid = 0; + wmb(); } else done = 1; } -- cgit v1.2.2 From daa142d1773dd3a986f02a8a4da929608d24daaa Mon Sep 17 00:00:00 2001 From: Brian King Date: Tue, 20 Apr 2010 14:21:35 -0500 Subject: [SCSI] ibmvfc: Reduce error recovery timeout If a command times out resulting in EH getting invoked, we wait for the aborted commands to come back after sending the abort. Shorten the amount of time we wait for these responses, to ensure we don't get stuck in EH for several minutes. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvfc.c | 2 +- drivers/scsi/ibmvscsi/ibmvfc.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index 9372169374e2..d18f45c95639 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -2245,7 +2245,7 @@ static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device, DECLARE_COMPLETION_ONSTACK(comp); int wait; unsigned long flags; - signed long timeout = init_timeout * HZ; + signed long timeout = IBMVFC_ABORT_WAIT_TIMEOUT * HZ; ENTER; do { diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h index d25106a958d7..7e9742764e4b 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.h +++ b/drivers/scsi/ibmvscsi/ibmvfc.h @@ -38,6 +38,7 @@ #define IBMVFC_ADISC_PLUS_CANCEL_TIMEOUT \ (IBMVFC_ADISC_TIMEOUT + IBMVFC_ADISC_CANCEL_TIMEOUT) #define IBMVFC_INIT_TIMEOUT 120 +#define IBMVFC_ABORT_WAIT_TIMEOUT 40 #define IBMVFC_MAX_REQUESTS_DEFAULT 100 #define IBMVFC_DEBUG 0 -- cgit v1.2.2 From 2471b894068ec59ab3012e788401b345ef459e49 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 23 Apr 2010 14:01:04 +0200 Subject: [SCSI] pm8001: potential null dereference in pm8001_dev_gone_notify() In the original code we dereferenced "pm8001_dev" before checking if it was null. This patch moves the dereference inside the condition. This was found by a static checker (smatch). I looked, but I couldn't tell if "pm8001_dev" dev was ever actually null. The approach in this patch seemed like the safest response. Signed-off-by: Dan Carpenter Acked-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_sas.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index bff4f5139b9c..cd02ceaf67ff 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -885,11 +885,13 @@ static void pm8001_dev_gone_notify(struct domain_device *dev) u32 tag; struct pm8001_hba_info *pm8001_ha; struct pm8001_device *pm8001_dev = dev->lldd_dev; - u32 device_id = pm8001_dev->device_id; + pm8001_ha = pm8001_find_ha_by_dev(dev); spin_lock_irqsave(&pm8001_ha->lock, flags); pm8001_tag_alloc(pm8001_ha, &tag); if (pm8001_dev) { + u32 device_id = pm8001_dev->device_id; + PM8001_DISC_DBG(pm8001_ha, pm8001_printk("found dev[%d:%x] is gone.\n", pm8001_dev->device_id, pm8001_dev->dev_type)); -- cgit v1.2.2 From 7407e5bba2cc821950344fd1391d9ad1b7e0b397 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 27 Apr 2010 14:11:47 -0700 Subject: [SCSI] Unexport scsi/scsi.h from headers_install The scsi/scsi.h header is normally provided by the libc (and was not exported by the kernel since 2.6.24) and has been until it was re-exported with 2.6.31. The kernel version is not userspace clean and does not appear to provide anything useable in userland over the (e)glibc version. Signed-off-by: Tom Rini Signed-off-by: James Bottomley --- include/scsi/Kbuild | 1 - 1 file changed, 1 deletion(-) diff --git a/include/scsi/Kbuild b/include/scsi/Kbuild index b3a0ee6b2f1c..f2b94918994d 100644 --- a/include/scsi/Kbuild +++ b/include/scsi/Kbuild @@ -1,4 +1,3 @@ -header-y += scsi.h header-y += scsi_netlink.h header-y += scsi_netlink_fc.h header-y += scsi_bsg_fc.h -- cgit v1.2.2 From 3487d9e7c4727b3e587f61d2120e35e34f200faa Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 27 Apr 2010 22:39:22 -0700 Subject: [SCSI] cxgb3i: Fix error path for module init If cxgb3i_pdu_init() fails, then it appears that cxgb3i_iscsi_init() will not be cleaned up, leading to the iscsi transport being left registered. Fix this by adding a call to cxgb3i_iscsi_cleanup() on the error path. Signed-off-by: Roland Dreier Reviewed-by: Mike Christie Cc: Karen Xie Signed-off-by: James Bottomley --- drivers/scsi/cxgb3i/cxgb3i_init.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/cxgb3i/cxgb3i_init.c b/drivers/scsi/cxgb3i/cxgb3i_init.c index d0ab23a58355..685af3698518 100644 --- a/drivers/scsi/cxgb3i/cxgb3i_init.c +++ b/drivers/scsi/cxgb3i/cxgb3i_init.c @@ -104,8 +104,10 @@ static int __init cxgb3i_init_module(void) return err; err = cxgb3i_pdu_init(); - if (err < 0) + if (err < 0) { + cxgb3i_iscsi_cleanup(); return err; + } cxgb3_register_client(&t3c_client); -- cgit v1.2.2 From 2a49a78ed3c8d7c8319595270110c69f99c61a74 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Wed, 28 Apr 2010 11:37:07 +0530 Subject: [SCSI] qla4xxx: added IPv6 support. Signed-off-by: Karen Higgins Signed-off-by: Vikas Chaudhary Signed-off-by: Ravi Anand Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 40 +++++- drivers/scsi/qla4xxx/ql4_fw.h | 45 ++++++- drivers/scsi/qla4xxx/ql4_init.c | 218 ++++++++++++++++++++++++------ drivers/scsi/qla4xxx/ql4_mbx.c | 284 +++++++++++++++++++++++++++------------- 4 files changed, 445 insertions(+), 142 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 81b5f29254e2..3175709d4861 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -114,6 +114,7 @@ */ #define MAC_ADDR_LEN 6 /* in bytes */ #define IP_ADDR_LEN 4 /* in bytes */ +#define IPv6_ADDR_LEN 16 /* IPv6 address size */ #define DRIVER_NAME "qla4xxx" #define MAX_LINKED_CMDS_PER_LUN 3 @@ -220,7 +221,7 @@ struct ddb_entry { uint16_t os_target_id; /* Target ID */ uint16_t fw_ddb_index; /* DDB firmware index */ - uint8_t reserved[2]; + uint16_t options; uint32_t fw_ddb_device_state; /* F/W Device State -- see ql4_fw.h */ uint32_t CmdSn; @@ -245,10 +246,18 @@ struct ddb_entry { uint16_t port; uint32_t tpgt; - uint8_t ip_addr[ISCSI_IPADDR_SIZE]; + uint8_t ip_addr[IP_ADDR_LEN]; uint8_t iscsi_name[ISCSI_NAME_SIZE]; /* 72 x48 */ uint8_t iscsi_alias[0x20]; uint8_t isid[6]; + uint16_t iscsi_max_burst_len; + uint16_t iscsi_max_outsnd_r2t; + uint16_t iscsi_first_burst_len; + uint16_t iscsi_max_rcv_data_seg_len; + uint16_t iscsi_max_snd_data_seg_len; + + struct in6_addr remote_ipv6_addr; + struct in6_addr link_local_ipv6_addr; }; /* @@ -441,8 +450,35 @@ struct scsi_qla_host { /* Saved srb for status continuation entry processing */ struct srb *status_srb; + + /* IPv6 support info from InitFW */ + uint8_t acb_version; + uint8_t ipv4_addr_state; + uint16_t ipv4_options; + + uint32_t resvd2; + uint32_t ipv6_options; + uint32_t ipv6_addl_options; + uint8_t ipv6_link_local_state; + uint8_t ipv6_addr0_state; + uint8_t ipv6_addr1_state; + uint8_t ipv6_default_router_state; + struct in6_addr ipv6_link_local_addr; + struct in6_addr ipv6_addr0; + struct in6_addr ipv6_addr1; + struct in6_addr ipv6_default_router_addr; }; +static inline int is_ipv4_enabled(struct scsi_qla_host *ha) +{ + return ((ha->ipv4_options & IPOPT_IPv4_PROTOCOL_ENABLE) != 0); +} + +static inline int is_ipv6_enabled(struct scsi_qla_host *ha) +{ + return ((ha->ipv6_options & IPV6_OPT_IPV6_PROTOCOL_ENABLE) != 0); +} + static inline int is_qla4010(struct scsi_qla_host *ha) { return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP4010; diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index 9cd7a608df38..dfe7b4dd3912 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -258,13 +258,15 @@ union external_hw_config_reg { /* Mailbox 1 */ #define FW_STATE_READY 0x0000 #define FW_STATE_CONFIG_WAIT 0x0001 -#define FW_STATE_WAIT_LOGIN 0x0002 +#define FW_STATE_WAIT_AUTOCONNECT 0x0002 #define FW_STATE_ERROR 0x0004 -#define FW_STATE_DHCP_IN_PROGRESS 0x0008 +#define FW_STATE_CONFIGURING_IP 0x0008 /* Mailbox 3 */ #define FW_ADDSTATE_OPTICAL_MEDIA 0x0001 -#define FW_ADDSTATE_DHCP_ENABLED 0x0002 +#define FW_ADDSTATE_DHCPv4_ENABLED 0x0002 +#define FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED 0x0004 +#define FW_ADDSTATE_DHCPv4_LEASE_EXPIRED 0x0008 #define FW_ADDSTATE_LINK_UP 0x0010 #define FW_ADDSTATE_ISNS_SVC_ENABLED 0x0020 #define MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS 0x006B @@ -320,6 +322,8 @@ union external_hw_config_reg { /* Host Adapter Initialization Control Block (from host) */ struct addr_ctrl_blk { uint8_t version; /* 00 */ +#define IFCB_VER_MIN 0x01 +#define IFCB_VER_MAX 0x02 uint8_t control; /* 01 */ uint16_t fw_options; /* 02-03 */ @@ -351,11 +355,16 @@ struct addr_ctrl_blk { uint16_t iscsi_opts; /* 30-31 */ uint16_t ipv4_tcp_opts; /* 32-33 */ uint16_t ipv4_ip_opts; /* 34-35 */ +#define IPOPT_IPv4_PROTOCOL_ENABLE 0x8000 uint16_t iscsi_max_pdu_size; /* 36-37 */ uint8_t ipv4_tos; /* 38 */ uint8_t ipv4_ttl; /* 39 */ uint8_t acb_version; /* 3A */ +#define ACB_NOT_SUPPORTED 0x00 +#define ACB_SUPPORTED 0x02 /* Capable of ACB Version 2 + Features */ + uint8_t res2; /* 3B */ uint16_t def_timeout; /* 3C-3D */ uint16_t iscsi_fburst_len; /* 3E-3F */ @@ -397,16 +406,35 @@ struct addr_ctrl_blk { uint32_t cookie; /* 200-203 */ uint16_t ipv6_port; /* 204-205 */ uint16_t ipv6_opts; /* 206-207 */ +#define IPV6_OPT_IPV6_PROTOCOL_ENABLE 0x8000 + uint16_t ipv6_addtl_opts; /* 208-209 */ +#define IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE 0x0002 /* Pri ACB + Only */ +#define IPV6_ADDOPT_AUTOCONFIG_LINK_LOCAL_ADDR 0x0001 + uint16_t ipv6_tcp_opts; /* 20A-20B */ uint8_t ipv6_tcp_wsf; /* 20C */ uint16_t ipv6_flow_lbl; /* 20D-20F */ - uint8_t ipv6_gw_addr[16]; /* 210-21F */ + uint8_t ipv6_dflt_rtr_addr[16]; /* 210-21F */ uint16_t ipv6_vlan_tag; /* 220-221 */ uint8_t ipv6_lnk_lcl_addr_state;/* 222 */ uint8_t ipv6_addr0_state; /* 223 */ uint8_t ipv6_addr1_state; /* 224 */ - uint8_t ipv6_gw_state; /* 225 */ +#define IP_ADDRSTATE_UNCONFIGURED 0 +#define IP_ADDRSTATE_INVALID 1 +#define IP_ADDRSTATE_ACQUIRING 2 +#define IP_ADDRSTATE_TENTATIVE 3 +#define IP_ADDRSTATE_DEPRICATED 4 +#define IP_ADDRSTATE_PREFERRED 5 +#define IP_ADDRSTATE_DISABLING 6 + + uint8_t ipv6_dflt_rtr_state; /* 225 */ +#define IPV6_RTRSTATE_UNKNOWN 0 +#define IPV6_RTRSTATE_MANUAL 1 +#define IPV6_RTRSTATE_ADVERTISED 3 +#define IPV6_RTRSTATE_STALE 4 + uint8_t ipv6_traffic_class; /* 226 */ uint8_t ipv6_hop_limit; /* 227 */ uint8_t ipv6_if_id[8]; /* 228-22F */ @@ -424,7 +452,7 @@ struct addr_ctrl_blk { struct init_fw_ctrl_blk { struct addr_ctrl_blk pri; - struct addr_ctrl_blk sec; +/* struct addr_ctrl_blk sec;*/ }; /*************************************************************************/ @@ -433,6 +461,9 @@ struct dev_db_entry { uint16_t options; /* 00-01 */ #define DDB_OPT_DISC_SESSION 0x10 #define DDB_OPT_TARGET 0x02 /* device is a target */ +#define DDB_OPT_IPV6_DEVICE 0x100 +#define DDB_OPT_IPV6_NULL_LINK_LOCAL 0x800 /* post connection */ +#define DDB_OPT_IPV6_FW_DEFINED_LINK_LOCAL 0x800 /* pre connection */ uint16_t exec_throttle; /* 02-03 */ uint16_t exec_count; /* 04-05 */ @@ -468,7 +499,7 @@ struct dev_db_entry { * pointer to a string so we * don't have to reserve soooo * much RAM */ - uint8_t ipv6_addr[0x10];/* 1A0-1AF */ + uint8_t link_local_ipv6_addr[0x10]; /* 1A0-1AF */ uint8_t res5[0x10]; /* 1B0-1BF */ uint16_t ddb_link; /* 1C0-1C1 */ uint16_t chap_tbl_idx; /* 1C2-1C3 */ diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 92329a461c68..36ec02c49a1b 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -189,6 +189,78 @@ static int qla4xxx_init_local_data(struct scsi_qla_host *ha) return qla4xxx_get_firmware_status(ha); } +static uint8_t +qla4xxx_wait_for_ip_config(struct scsi_qla_host *ha) +{ + uint8_t ipv4_wait = 0; + uint8_t ipv6_wait = 0; + int8_t ip_address[IPv6_ADDR_LEN] = {0} ; + + /* If both IPv4 & IPv6 are enabled, possibly only one + * IP address may be acquired, so check to see if we + * need to wait for another */ + if (is_ipv4_enabled(ha) && is_ipv6_enabled(ha)) { + if (((ha->addl_fw_state & FW_ADDSTATE_DHCPv4_ENABLED) != 0) && + ((ha->addl_fw_state & + FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED) == 0)) { + ipv4_wait = 1; + } + if (((ha->ipv6_addl_options & + IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) != 0) && + ((ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING) || + (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING) || + (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING))) { + + ipv6_wait = 1; + + if ((ha->ipv6_link_local_state == + IP_ADDRSTATE_PREFERRED) || + (ha->ipv6_addr0_state == IP_ADDRSTATE_PREFERRED) || + (ha->ipv6_addr1_state == IP_ADDRSTATE_PREFERRED)) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s: " + "Preferred IP configured." + " Don't wait!\n", ha->host_no, + __func__)); + ipv6_wait = 0; + } + if (memcmp(&ha->ipv6_default_router_addr, ip_address, + IPv6_ADDR_LEN) == 0) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s: " + "No Router configured. " + "Don't wait!\n", ha->host_no, + __func__)); + ipv6_wait = 0; + } + if ((ha->ipv6_default_router_state == + IPV6_RTRSTATE_MANUAL) && + (ha->ipv6_link_local_state == + IP_ADDRSTATE_TENTATIVE) && + (memcmp(&ha->ipv6_link_local_addr, + &ha->ipv6_default_router_addr, 4) == 0)) { + DEBUG2(printk("scsi%ld: %s: LinkLocal Router & " + "IP configured. Don't wait!\n", + ha->host_no, __func__)); + ipv6_wait = 0; + } + } + if (ipv4_wait || ipv6_wait) { + DEBUG2(printk("scsi%ld: %s: Wait for additional " + "IP(s) \"", ha->host_no, __func__)); + if (ipv4_wait) + DEBUG2(printk("IPv4 ")); + if (ha->ipv6_link_local_state == IP_ADDRSTATE_ACQUIRING) + DEBUG2(printk("IPv6LinkLocal ")); + if (ha->ipv6_addr0_state == IP_ADDRSTATE_ACQUIRING) + DEBUG2(printk("IPv6Addr0 ")); + if (ha->ipv6_addr1_state == IP_ADDRSTATE_ACQUIRING) + DEBUG2(printk("IPv6Addr1 ")); + DEBUG2(printk("\"\n")); + } + } + + return ipv4_wait|ipv6_wait; +} + static int qla4xxx_fw_ready(struct scsi_qla_host *ha) { uint32_t timeout_count; @@ -226,38 +298,80 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha) continue; } + if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:" + "AUTOCONNECT in progress\n", + ha->host_no, __func__)); + } + + if (ha->firmware_state & FW_STATE_CONFIGURING_IP) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:" + " CONFIGURING IP\n", + ha->host_no, __func__)); + /* + * Check for link state after 15 secs and if link is + * still DOWN then, cable is unplugged. Ignore "DHCP + * in Progress/CONFIGURING IP" bit to check if firmware + * is in ready state or not after 15 secs. + * This is applicable for both 2.x & 3.x firmware + */ + if (timeout_count <= (ADAPTER_INIT_TOV - 15)) { + if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s:" + " LINK UP (Cable plugged)\n", + ha->host_no, __func__)); + } else if (ha->firmware_state & + (FW_STATE_CONFIGURING_IP | + FW_STATE_READY)) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s: " + "LINK DOWN (Cable unplugged)\n", + ha->host_no, __func__)); + ha->firmware_state = FW_STATE_READY; + } + } + } + if (ha->firmware_state == FW_STATE_READY) { - DEBUG2(dev_info(&ha->pdev->dev, "Firmware Ready..\n")); - /* The firmware is ready to process SCSI commands. */ - DEBUG2(dev_info(&ha->pdev->dev, - "scsi%ld: %s: MEDIA TYPE - %s\n", - ha->host_no, - __func__, (ha->addl_fw_state & - FW_ADDSTATE_OPTICAL_MEDIA) - != 0 ? "OPTICAL" : "COPPER")); - DEBUG2(dev_info(&ha->pdev->dev, - "scsi%ld: %s: DHCP STATE Enabled " - "%s\n", - ha->host_no, __func__, - (ha->addl_fw_state & - FW_ADDSTATE_DHCP_ENABLED) != 0 ? - "YES" : "NO")); - DEBUG2(dev_info(&ha->pdev->dev, - "scsi%ld: %s: LINK %s\n", - ha->host_no, __func__, - (ha->addl_fw_state & - FW_ADDSTATE_LINK_UP) != 0 ? - "UP" : "DOWN")); - DEBUG2(dev_info(&ha->pdev->dev, - "scsi%ld: %s: iSNS Service " - "Started %s\n", - ha->host_no, __func__, - (ha->addl_fw_state & - FW_ADDSTATE_ISNS_SVC_ENABLED) != 0 ? - "YES" : "NO")); - - ready = 1; - break; + /* If DHCP IP Addr is available, retrieve it now. */ + if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, + &ha->dpc_flags)) + qla4xxx_get_dhcp_ip_address(ha); + + if (!qla4xxx_wait_for_ip_config(ha) || + timeout_count == 1) { + DEBUG2(dev_info(&ha->pdev->dev, + "Firmware Ready..\n")); + /* The firmware is ready to process SCSI + commands. */ + DEBUG2(dev_info(&ha->pdev->dev, + "scsi%ld: %s: MEDIA TYPE" + " - %s\n", ha->host_no, + __func__, (ha->addl_fw_state & + FW_ADDSTATE_OPTICAL_MEDIA) + != 0 ? "OPTICAL" : "COPPER")); + DEBUG2(dev_info(&ha->pdev->dev, + "scsi%ld: %s: DHCPv4 STATE" + " Enabled %s\n", ha->host_no, + __func__, (ha->addl_fw_state & + FW_ADDSTATE_DHCPv4_ENABLED) != 0 ? + "YES" : "NO")); + DEBUG2(dev_info(&ha->pdev->dev, + "scsi%ld: %s: LINK %s\n", + ha->host_no, __func__, + (ha->addl_fw_state & + FW_ADDSTATE_LINK_UP) != 0 ? + "UP" : "DOWN")); + DEBUG2(dev_info(&ha->pdev->dev, + "scsi%ld: %s: iSNS Service " + "Started %s\n", + ha->host_no, __func__, + (ha->addl_fw_state & + FW_ADDSTATE_ISNS_SVC_ENABLED) != 0 ? + "YES" : "NO")); + + ready = 1; + break; + } } DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - " "seconds expired= %d\n", ha->host_no, __func__, @@ -272,15 +386,19 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha) msleep(1000); } /* end of for */ - if (timeout_count == 0) + if (timeout_count <= 0) DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n", ha->host_no, __func__)); - if (ha->firmware_state & FW_STATE_DHCP_IN_PROGRESS) { - DEBUG2(printk("scsi%ld: %s: FW is reporting its waiting to" - " grab an IP address from DHCP server\n", - ha->host_no, __func__)); + if (ha->firmware_state & FW_STATE_CONFIGURING_IP) { + DEBUG2(printk("scsi%ld: %s: FW initialized, but is reporting " + "it's waiting to configure an IP address\n", + ha->host_no, __func__)); ready = 1; + } else if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) { + DEBUG2(printk("scsi%ld: %s: FW initialized, but " + "auto-discovery still in process\n", + ha->host_no, __func__)); } return ready; @@ -419,6 +537,7 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, } status = QLA_SUCCESS; + ddb_entry->options = le16_to_cpu(fw_ddb_entry->options); ddb_entry->target_session_id = le16_to_cpu(fw_ddb_entry->tsid); ddb_entry->task_mgmt_timeout = le16_to_cpu(fw_ddb_entry->def_timeout); @@ -442,11 +561,30 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, memcpy(&ddb_entry->ip_addr[0], &fw_ddb_entry->ip_addr[0], min(sizeof(ddb_entry->ip_addr), sizeof(fw_ddb_entry->ip_addr))); + ddb_entry->iscsi_max_burst_len = fw_ddb_entry->iscsi_max_burst_len; + ddb_entry->iscsi_max_outsnd_r2t = fw_ddb_entry->iscsi_max_outsnd_r2t; + ddb_entry->iscsi_first_burst_len = fw_ddb_entry->iscsi_first_burst_len; + ddb_entry->iscsi_max_rcv_data_seg_len = + fw_ddb_entry->iscsi_max_rcv_data_seg_len; + ddb_entry->iscsi_max_snd_data_seg_len = + fw_ddb_entry->iscsi_max_snd_data_seg_len; + + if (ddb_entry->options & DDB_OPT_IPV6_DEVICE) { + memcpy(&ddb_entry->remote_ipv6_addr, + fw_ddb_entry->ip_addr, + min(sizeof(ddb_entry->remote_ipv6_addr), + sizeof(fw_ddb_entry->ip_addr))); + memcpy(&ddb_entry->link_local_ipv6_addr, + fw_ddb_entry->link_local_ipv6_addr, + min(sizeof(ddb_entry->link_local_ipv6_addr), + sizeof(fw_ddb_entry->link_local_ipv6_addr))); + } + DEBUG2(printk("scsi%ld: %s: ddb[%d] - State= %x status= %d.\n", - ha->host_no, __func__, fw_ddb_index, - ddb_entry->fw_ddb_device_state, status)); + ha->host_no, __func__, fw_ddb_index, + ddb_entry->fw_ddb_device_state, status)); - exit_update_ddb: +exit_update_ddb: if (fw_ddb_entry) dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), fw_ddb_entry, fw_ddb_entry_dma); @@ -1166,7 +1304,7 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, * the ddb_list and wait for DHCP lease acquired aen to come in * followed by 0x8014 aen" to trigger the tgt discovery process. */ - if (ha->firmware_state & FW_STATE_DHCP_IN_PROGRESS) + if (ha->firmware_state & FW_STATE_CONFIGURING_IP) goto exit_init_online; /* Skip device discovery if ip and subnet is zero */ diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index 09d6d4b76f39..43581ce3a1b6 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -172,108 +172,207 @@ mbox_exit: return status; } +uint8_t +qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd, + uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma) +{ + memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT); + memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT); + mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE; + mbox_cmd[1] = 0; + mbox_cmd[2] = LSDW(init_fw_cb_dma); + mbox_cmd[3] = MSDW(init_fw_cb_dma); + mbox_cmd[4] = sizeof(struct addr_ctrl_blk); + mbox_cmd[5] = (IFCB_VER_MAX << 8) | IFCB_VER_MIN; + + if (qla4xxx_mailbox_command(ha, 6, 6, mbox_cmd, mbox_sts) != + QLA_SUCCESS) { + DEBUG2(printk(KERN_WARNING "scsi%ld: %s: " + "MBOX_CMD_INITIALIZE_FIRMWARE" + " failed w/ status %04X\n", + ha->host_no, __func__, mbox_sts[0])); + return QLA_ERROR; + } + return QLA_SUCCESS; +} + +uint8_t +qla4xxx_get_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd, + uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma) +{ + memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT); + memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT); + mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK; + mbox_cmd[2] = LSDW(init_fw_cb_dma); + mbox_cmd[3] = MSDW(init_fw_cb_dma); + mbox_cmd[4] = sizeof(struct addr_ctrl_blk); + + if (qla4xxx_mailbox_command(ha, 5, 5, mbox_cmd, mbox_sts) != + QLA_SUCCESS) { + DEBUG2(printk(KERN_WARNING "scsi%ld: %s: " + "MBOX_CMD_GET_INIT_FW_CTRL_BLOCK" + " failed w/ status %04X\n", + ha->host_no, __func__, mbox_sts[0])); + return QLA_ERROR; + } + return QLA_SUCCESS; +} + +void +qla4xxx_update_local_ip(struct scsi_qla_host *ha, + struct addr_ctrl_blk *init_fw_cb) +{ + /* Save IPv4 Address Info */ + memcpy(ha->ip_address, init_fw_cb->ipv4_addr, + min(sizeof(ha->ip_address), sizeof(init_fw_cb->ipv4_addr))); + memcpy(ha->subnet_mask, init_fw_cb->ipv4_subnet, + min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->ipv4_subnet))); + memcpy(ha->gateway, init_fw_cb->ipv4_gw_addr, + min(sizeof(ha->gateway), sizeof(init_fw_cb->ipv4_gw_addr))); + + if (is_ipv6_enabled(ha)) { + /* Save IPv6 Address */ + ha->ipv6_link_local_state = init_fw_cb->ipv6_lnk_lcl_addr_state; + ha->ipv6_addr0_state = init_fw_cb->ipv6_addr0_state; + ha->ipv6_addr1_state = init_fw_cb->ipv6_addr1_state; + ha->ipv6_default_router_state = init_fw_cb->ipv6_dflt_rtr_state; + ha->ipv6_link_local_addr.in6_u.u6_addr8[0] = 0xFE; + ha->ipv6_link_local_addr.in6_u.u6_addr8[1] = 0x80; + + memcpy(&ha->ipv6_link_local_addr.in6_u.u6_addr8[8], + init_fw_cb->ipv6_if_id, + min(sizeof(ha->ipv6_link_local_addr)/2, + sizeof(init_fw_cb->ipv6_if_id))); + memcpy(&ha->ipv6_addr0, init_fw_cb->ipv6_addr0, + min(sizeof(ha->ipv6_addr0), + sizeof(init_fw_cb->ipv6_addr0))); + memcpy(&ha->ipv6_addr1, init_fw_cb->ipv6_addr1, + min(sizeof(ha->ipv6_addr1), + sizeof(init_fw_cb->ipv6_addr1))); + memcpy(&ha->ipv6_default_router_addr, + init_fw_cb->ipv6_dflt_rtr_addr, + min(sizeof(ha->ipv6_default_router_addr), + sizeof(init_fw_cb->ipv6_dflt_rtr_addr))); + } +} + +uint8_t +qla4xxx_update_local_ifcb(struct scsi_qla_host *ha, + uint32_t *mbox_cmd, + uint32_t *mbox_sts, + struct addr_ctrl_blk *init_fw_cb, + dma_addr_t init_fw_cb_dma) +{ + if (qla4xxx_get_ifcb(ha, mbox_cmd, mbox_sts, init_fw_cb_dma) + != QLA_SUCCESS) { + DEBUG2(printk(KERN_WARNING + "scsi%ld: %s: Failed to get init_fw_ctrl_blk\n", + ha->host_no, __func__)); + return QLA_ERROR; + } + + DEBUG2(qla4xxx_dump_buffer(init_fw_cb, sizeof(struct addr_ctrl_blk))); + + /* Save some info in adapter structure. */ + ha->acb_version = init_fw_cb->acb_version; + ha->firmware_options = le16_to_cpu(init_fw_cb->fw_options); + ha->tcp_options = le16_to_cpu(init_fw_cb->ipv4_tcp_opts); + ha->ipv4_options = le16_to_cpu(init_fw_cb->ipv4_ip_opts); + ha->ipv4_addr_state = le16_to_cpu(init_fw_cb->ipv4_addr_state); + ha->heartbeat_interval = init_fw_cb->hb_interval; + memcpy(ha->name_string, init_fw_cb->iscsi_name, + min(sizeof(ha->name_string), + sizeof(init_fw_cb->iscsi_name))); + /*memcpy(ha->alias, init_fw_cb->Alias, + min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/ + + /* Save Command Line Paramater info */ + ha->port_down_retry_count = le16_to_cpu(init_fw_cb->conn_ka_timeout); + ha->discovery_wait = ql4xdiscoverywait; + + if (ha->acb_version == ACB_SUPPORTED) { + ha->ipv6_options = init_fw_cb->ipv6_opts; + ha->ipv6_addl_options = init_fw_cb->ipv6_addtl_opts; + } + qla4xxx_update_local_ip(ha, init_fw_cb); + + return QLA_SUCCESS; +} + /** * qla4xxx_initialize_fw_cb - initializes firmware control block. * @ha: Pointer to host adapter structure. **/ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha) { - struct init_fw_ctrl_blk *init_fw_cb; + struct addr_ctrl_blk *init_fw_cb; dma_addr_t init_fw_cb_dma; uint32_t mbox_cmd[MBOX_REG_COUNT]; uint32_t mbox_sts[MBOX_REG_COUNT]; int status = QLA_ERROR; init_fw_cb = dma_alloc_coherent(&ha->pdev->dev, - sizeof(struct init_fw_ctrl_blk), + sizeof(struct addr_ctrl_blk), &init_fw_cb_dma, GFP_KERNEL); if (init_fw_cb == NULL) { DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no, __func__)); return 10; } - memset(init_fw_cb, 0, sizeof(struct init_fw_ctrl_blk)); + memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk)); /* Get Initialize Firmware Control Block. */ memset(&mbox_cmd, 0, sizeof(mbox_cmd)); memset(&mbox_sts, 0, sizeof(mbox_sts)); - mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK; - mbox_cmd[2] = LSDW(init_fw_cb_dma); - mbox_cmd[3] = MSDW(init_fw_cb_dma); - mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk); - - if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) != + if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) != QLA_SUCCESS) { dma_free_coherent(&ha->pdev->dev, - sizeof(struct init_fw_ctrl_blk), + sizeof(struct addr_ctrl_blk), init_fw_cb, init_fw_cb_dma); - return status; + goto exit_init_fw_cb; } /* Initialize request and response queues. */ qla4xxx_init_rings(ha); /* Fill in the request and response queue information. */ - init_fw_cb->pri.rqq_consumer_idx = cpu_to_le16(ha->request_out); - init_fw_cb->pri.compq_producer_idx = cpu_to_le16(ha->response_in); - init_fw_cb->pri.rqq_len = __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH); - init_fw_cb->pri.compq_len = __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH); - init_fw_cb->pri.rqq_addr_lo = cpu_to_le32(LSDW(ha->request_dma)); - init_fw_cb->pri.rqq_addr_hi = cpu_to_le32(MSDW(ha->request_dma)); - init_fw_cb->pri.compq_addr_lo = cpu_to_le32(LSDW(ha->response_dma)); - init_fw_cb->pri.compq_addr_hi = cpu_to_le32(MSDW(ha->response_dma)); - init_fw_cb->pri.shdwreg_addr_lo = - cpu_to_le32(LSDW(ha->shadow_regs_dma)); - init_fw_cb->pri.shdwreg_addr_hi = - cpu_to_le32(MSDW(ha->shadow_regs_dma)); + init_fw_cb->rqq_consumer_idx = cpu_to_le16(ha->request_out); + init_fw_cb->compq_producer_idx = cpu_to_le16(ha->response_in); + init_fw_cb->rqq_len = __constant_cpu_to_le16(REQUEST_QUEUE_DEPTH); + init_fw_cb->compq_len = __constant_cpu_to_le16(RESPONSE_QUEUE_DEPTH); + init_fw_cb->rqq_addr_lo = cpu_to_le32(LSDW(ha->request_dma)); + init_fw_cb->rqq_addr_hi = cpu_to_le32(MSDW(ha->request_dma)); + init_fw_cb->compq_addr_lo = cpu_to_le32(LSDW(ha->response_dma)); + init_fw_cb->compq_addr_hi = cpu_to_le32(MSDW(ha->response_dma)); + init_fw_cb->shdwreg_addr_lo = cpu_to_le32(LSDW(ha->shadow_regs_dma)); + init_fw_cb->shdwreg_addr_hi = cpu_to_le32(MSDW(ha->shadow_regs_dma)); /* Set up required options. */ - init_fw_cb->pri.fw_options |= + init_fw_cb->fw_options |= __constant_cpu_to_le16(FWOPT_SESSION_MODE | FWOPT_INITIATOR_MODE); - init_fw_cb->pri.fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE); + init_fw_cb->fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE); - /* Save some info in adapter structure. */ - ha->firmware_options = le16_to_cpu(init_fw_cb->pri.fw_options); - ha->tcp_options = le16_to_cpu(init_fw_cb->pri.ipv4_tcp_opts); - ha->heartbeat_interval = init_fw_cb->pri.hb_interval; - memcpy(ha->ip_address, init_fw_cb->pri.ipv4_addr, - min(sizeof(ha->ip_address), sizeof(init_fw_cb->pri.ipv4_addr))); - memcpy(ha->subnet_mask, init_fw_cb->pri.ipv4_subnet, - min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->pri.ipv4_subnet))); - memcpy(ha->gateway, init_fw_cb->pri.ipv4_gw_addr, - min(sizeof(ha->gateway), sizeof(init_fw_cb->pri.ipv4_gw_addr))); - memcpy(ha->name_string, init_fw_cb->pri.iscsi_name, - min(sizeof(ha->name_string), - sizeof(init_fw_cb->pri.iscsi_name))); - /*memcpy(ha->alias, init_fw_cb->Alias, - min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/ - - /* Save Command Line Paramater info */ - ha->port_down_retry_count = le16_to_cpu(init_fw_cb->pri.conn_ka_timeout); - ha->discovery_wait = ql4xdiscoverywait; - - /* Send Initialize Firmware Control Block. */ - memset(&mbox_cmd, 0, sizeof(mbox_cmd)); - memset(&mbox_sts, 0, sizeof(mbox_sts)); - - mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE; - mbox_cmd[1] = 0; - mbox_cmd[2] = LSDW(init_fw_cb_dma); - mbox_cmd[3] = MSDW(init_fw_cb_dma); - mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk); + if (qla4xxx_set_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) + != QLA_SUCCESS) { + DEBUG2(printk(KERN_WARNING + "scsi%ld: %s: Failed to set init_fw_ctrl_blk\n", + ha->host_no, __func__)); + goto exit_init_fw_cb; + } - if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) == - QLA_SUCCESS) - status = QLA_SUCCESS; - else { - DEBUG2(printk("scsi%ld: %s: MBOX_CMD_INITIALIZE_FIRMWARE " - "failed w/ status %04X\n", ha->host_no, __func__, - mbox_sts[0])); + if (qla4xxx_update_local_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], + init_fw_cb, init_fw_cb_dma) != QLA_SUCCESS) { + DEBUG2(printk("scsi%ld: %s: Failed to update local ifcb\n", + ha->host_no, __func__)); + goto exit_init_fw_cb; } - dma_free_coherent(&ha->pdev->dev, sizeof(struct init_fw_ctrl_blk), - init_fw_cb, init_fw_cb_dma); + status = QLA_SUCCESS; + +exit_init_fw_cb: + dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk), + init_fw_cb, init_fw_cb_dma); return status; } @@ -284,13 +383,13 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha) **/ int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha) { - struct init_fw_ctrl_blk *init_fw_cb; + struct addr_ctrl_blk *init_fw_cb; dma_addr_t init_fw_cb_dma; uint32_t mbox_cmd[MBOX_REG_COUNT]; uint32_t mbox_sts[MBOX_REG_COUNT]; init_fw_cb = dma_alloc_coherent(&ha->pdev->dev, - sizeof(struct init_fw_ctrl_blk), + sizeof(struct addr_ctrl_blk), &init_fw_cb_dma, GFP_KERNEL); if (init_fw_cb == NULL) { printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no, @@ -299,35 +398,21 @@ int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha) } /* Get Initialize Firmware Control Block. */ - memset(&mbox_cmd, 0, sizeof(mbox_cmd)); - memset(&mbox_sts, 0, sizeof(mbox_sts)); - - memset(init_fw_cb, 0, sizeof(struct init_fw_ctrl_blk)); - mbox_cmd[0] = MBOX_CMD_GET_INIT_FW_CTRL_BLOCK; - mbox_cmd[2] = LSDW(init_fw_cb_dma); - mbox_cmd[3] = MSDW(init_fw_cb_dma); - mbox_cmd[4] = sizeof(struct init_fw_ctrl_blk); - - if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0], &mbox_sts[0]) != + memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk)); + if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) != QLA_SUCCESS) { DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n", ha->host_no, __func__)); dma_free_coherent(&ha->pdev->dev, - sizeof(struct init_fw_ctrl_blk), + sizeof(struct addr_ctrl_blk), init_fw_cb, init_fw_cb_dma); return QLA_ERROR; } /* Save IP Address. */ - memcpy(ha->ip_address, init_fw_cb->pri.ipv4_addr, - min(sizeof(ha->ip_address), sizeof(init_fw_cb->pri.ipv4_addr))); - memcpy(ha->subnet_mask, init_fw_cb->pri.ipv4_subnet, - min(sizeof(ha->subnet_mask), sizeof(init_fw_cb->pri.ipv4_subnet))); - memcpy(ha->gateway, init_fw_cb->pri.ipv4_gw_addr, - min(sizeof(ha->gateway), sizeof(init_fw_cb->pri.ipv4_gw_addr))); - - dma_free_coherent(&ha->pdev->dev, sizeof(struct init_fw_ctrl_blk), - init_fw_cb, init_fw_cb_dma); + qla4xxx_update_local_ip(ha, init_fw_cb); + dma_free_coherent(&ha->pdev->dev, sizeof(struct addr_ctrl_blk), + init_fw_cb, init_fw_cb_dma); return QLA_SUCCESS; } @@ -409,6 +494,7 @@ int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha, uint16_t *connection_id) { int status = QLA_ERROR; + uint16_t options; uint32_t mbox_cmd[MBOX_REG_COUNT]; uint32_t mbox_sts[MBOX_REG_COUNT]; @@ -441,14 +527,26 @@ int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha, goto exit_get_fwddb; } if (fw_ddb_entry) { - dev_info(&ha->pdev->dev, "DDB[%d] MB0 %04x Tot %d Next %d " - "State %04x ConnErr %08x %d.%d.%d.%d:%04d \"%s\"\n", - fw_ddb_index, mbox_sts[0], mbox_sts[2], mbox_sts[3], - mbox_sts[4], mbox_sts[5], fw_ddb_entry->ip_addr[0], - fw_ddb_entry->ip_addr[1], fw_ddb_entry->ip_addr[2], - fw_ddb_entry->ip_addr[3], - le16_to_cpu(fw_ddb_entry->port), - fw_ddb_entry->iscsi_name); + options = le16_to_cpu(fw_ddb_entry->options); + if (options & DDB_OPT_IPV6_DEVICE) { + dev_info(&ha->pdev->dev, "%s: DDB[%d] MB0 %04x Tot %d " + "Next %d State %04x ConnErr %08x %pI6 " + ":%04d \"%s\"\n", __func__, fw_ddb_index, + mbox_sts[0], mbox_sts[2], mbox_sts[3], + mbox_sts[4], mbox_sts[5], + fw_ddb_entry->ip_addr, + le16_to_cpu(fw_ddb_entry->port), + fw_ddb_entry->iscsi_name); + } else { + dev_info(&ha->pdev->dev, "%s: DDB[%d] MB0 %04x Tot %d " + "Next %d State %04x ConnErr %08x %pI4 " + ":%04d \"%s\"\n", __func__, fw_ddb_index, + mbox_sts[0], mbox_sts[2], mbox_sts[3], + mbox_sts[4], mbox_sts[5], + fw_ddb_entry->ip_addr, + le16_to_cpu(fw_ddb_entry->port), + fw_ddb_entry->iscsi_name); + } } if (num_valid_ddb_entries) *num_valid_ddb_entries = mbox_sts[2]; -- cgit v1.2.2 From 065aa1b4db63c7fa68a3e889510c4e63404a1ac7 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Wed, 28 Apr 2010 11:38:11 +0530 Subject: [SCSI] qla4xxx: set device state as per Link UP and LINK DOWN Link Down -> Mark all devices missing Previously, the driver took no action on a Link Down, and waited for the I/O on a dead connection to timeout in the firmware before marking the DDB missing. Link Up -> Mark all devices online F/W will do auto login to all the devices only once. After that its the responsibility of the driver to relogin to devices whenever there is : * Any sort of connection failure or * KATO expires indicating target has logged out or * I/O times out etc. Signed-off-by: Vikas Chaudhary Signed-off-by: Karen Higgins Signed-off-by: Ravi Anand Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 1 + drivers/scsi/qla4xxx/ql4_init.c | 12 +++++++--- drivers/scsi/qla4xxx/ql4_isr.c | 15 +++++++++---- drivers/scsi/qla4xxx/ql4_os.c | 49 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 70 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 3175709d4861..347a7c8b53e7 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -310,6 +310,7 @@ struct scsi_qla_host { #define DPC_ISNS_RESTART 7 /* 0x00000080 */ #define DPC_AEN 9 /* 0x00000200 */ #define DPC_GET_DHCP_IP_ADDR 15 /* 0x00008000 */ +#define DPC_LINK_CHANGED 18 /* 0x00040000 */ struct Scsi_Host *host; /* pointer to host data */ uint32_t tot_ddbs; diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 36ec02c49a1b..7f6cc2ebf46c 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -1279,6 +1279,7 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int status = QLA_ERROR; int8_t ip_address[IP_ADDR_LEN] = {0} ; + clear_bit(AF_ONLINE, &ha->flags); ha->eeprom_cmd_data = 0; qla4x00_pci_config(ha); @@ -1456,10 +1457,15 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, * the device came back. */ } else { - /* Device went away, try to relogin. */ - /* Mark device missing */ - if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) + /* Device went away, mark device missing */ + if (atomic_read(&ddb_entry->state) == DDB_STATE_ONLINE) { + DEBUG2(dev_info(&ha->pdev->dev, "%s mark missing " + "ddb_entry 0x%p sess 0x%p conn 0x%p\n", + __func__, ddb_entry, + ddb_entry->sess, ddb_entry->conn)); qla4xxx_mark_device_missing(ha, ddb_entry); + } + /* * Relogin if device state changed to a not active state. * However, do not relogin if this aen is a result of an IOCTL diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index c196d55eae39..9db286df7ca0 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -498,15 +498,22 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, break; case MBOX_ASTS_LINK_UP: - DEBUG2(printk("scsi%ld: AEN %04x Adapter LINK UP\n", - ha->host_no, mbox_status)); set_bit(AF_LINK_UP, &ha->flags); + if (test_bit(AF_INIT_DONE, &ha->flags)) + set_bit(DPC_LINK_CHANGED, &ha->dpc_flags); + + DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x Adapter" + " LINK UP\n", ha->host_no, + mbox_status)); break; case MBOX_ASTS_LINK_DOWN: - DEBUG2(printk("scsi%ld: AEN %04x Adapter LINK DOWN\n", - ha->host_no, mbox_status)); clear_bit(AF_LINK_UP, &ha->flags); + set_bit(DPC_LINK_CHANGED, &ha->dpc_flags); + + DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x Adapter" + " LINK DOWN\n", ha->host_no, + mbox_status)); break; case MBOX_ASTS_HEARTBEAT: diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 2ccad36bee9f..d6c8b429a675 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -685,6 +685,7 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) test_bit(DPC_RESET_HA_DESTROY_DDB_LIST, &ha->dpc_flags) || test_bit(DPC_RESET_HA_INTR, &ha->dpc_flags) || test_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags) || + test_bit(DPC_LINK_CHANGED, &ha->dpc_flags) || test_bit(DPC_AEN, &ha->dpc_flags)) && ha->dpc_thread) { DEBUG2(printk("scsi%ld: %s: scheduling dpc routine" @@ -1069,6 +1070,54 @@ static void qla4xxx_do_dpc(struct work_struct *work) if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags)) qla4xxx_get_dhcp_ip_address(ha); + /* ---- link change? --- */ + if (test_and_clear_bit(DPC_LINK_CHANGED, &ha->dpc_flags)) { + if (!test_bit(AF_LINK_UP, &ha->flags)) { + /* ---- link down? --- */ + list_for_each_entry_safe(ddb_entry, dtemp, + &ha->ddb_list, list) { + if (atomic_read(&ddb_entry->state) == + DDB_STATE_ONLINE) + qla4xxx_mark_device_missing(ha, + ddb_entry); + } + } else { + /* ---- link up? --- * + * F/W will auto login to all devices ONLY ONCE after + * link up during driver initialization and runtime + * fatal error recovery. Therefore, the driver must + * manually relogin to devices when recovering from + * connection failures, logouts, expired KATO, etc. */ + + list_for_each_entry_safe(ddb_entry, dtemp, + &ha->ddb_list, list) { + if ((atomic_read(&ddb_entry->state) == + DDB_STATE_MISSING) || + (atomic_read(&ddb_entry->state) == + DDB_STATE_DEAD)) { + if (ddb_entry->fw_ddb_device_state == + DDB_DS_SESSION_ACTIVE) { + atomic_set(&ddb_entry->state, + DDB_STATE_ONLINE); + dev_info(&ha->pdev->dev, + "scsi%ld: %s: ddb[%d]" + " os[%d] marked" + " ONLINE\n", + ha->host_no, __func__, + ddb_entry->fw_ddb_index, + ddb_entry->os_target_id); + + iscsi_unblock_session( + ddb_entry->sess); + } else + qla4xxx_relogin_device( + ha, ddb_entry); + } + + } + } + } + /* ---- relogin device? --- */ if (adapter_up(ha) && test_and_clear_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags)) { -- cgit v1.2.2 From c2393cd2dfdd435416cc097a70cc5f5e4f91a87e Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Wed, 28 Apr 2010 11:39:31 +0530 Subject: [SCSI] qla4xxx: Code Clean up - remove "marker_needed" Signed-off-by: Karen Higgins Signed-off-by: Vikas Chaudhary Signed-off-by: Ravi Anand Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 347a7c8b53e7..1e56b8ee19bb 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -330,8 +330,7 @@ struct scsi_qla_host { #define MIN_IOBASE_LEN 0x100 uint16_t req_q_count; - uint8_t marker_needed; - uint8_t rsvd1; + uint8_t rsvd1[2]; unsigned long host_no; -- cgit v1.2.2 From c301b0266c65c8781361ca152981cff4fac05498 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Wed, 28 Apr 2010 11:40:37 +0530 Subject: [SCSI] qla4xxx: Updated firmware ready timeout algorithm Updated firmware ready timeout algorithm to prevent long delays and use jiffies to time out instead of counter. Also use msleep_interruptible instead of msleep. Signed-off-by: Karen Higgins Signed-off-by: Vikas Chaudhary Signed-off-by: Ravi Anand Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_init.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 7f6cc2ebf46c..beaeb18a66ab 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -1046,7 +1046,7 @@ static void qla4x00_pci_config(struct scsi_qla_host *ha) static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha) { int status = QLA_ERROR; - uint32_t max_wait_time; + unsigned long max_wait_time; unsigned long flags; uint32_t mbox_status; @@ -1078,7 +1078,10 @@ static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha) spin_unlock_irqrestore(&ha->hardware_lock, flags); /* Wait for firmware to come UP. */ - max_wait_time = FIRMWARE_UP_TOV * 4; + DEBUG2(printk(KERN_INFO "scsi%ld: %s: Wait up to %d seconds for " + "boot firmware to complete...\n", + ha->host_no, __func__, FIRMWARE_UP_TOV)); + max_wait_time = jiffies + (FIRMWARE_UP_TOV * HZ); do { uint32_t ctrl_status; @@ -1092,16 +1095,15 @@ static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha) if (mbox_status == MBOX_STS_COMMAND_COMPLETE) break; - DEBUG2(printk("scsi%ld: %s: Waiting for boot firmware to " - "complete... ctrl_sts=0x%x, remaining=%d\n", - ha->host_no, __func__, ctrl_status, - max_wait_time)); + DEBUG2(printk(KERN_INFO "scsi%ld: %s: Waiting for boot " + "firmware to complete... ctrl_sts=0x%x\n", + ha->host_no, __func__, ctrl_status)); - msleep(250); - } while ((max_wait_time--)); + msleep_interruptible(250); + } while (!time_after_eq(jiffies, max_wait_time)); if (mbox_status == MBOX_STS_COMMAND_COMPLETE) { - DEBUG(printk("scsi%ld: %s: Firmware has started\n", + DEBUG(printk(KERN_INFO "scsi%ld: %s: Firmware has started\n", ha->host_no, __func__)); spin_lock_irqsave(&ha->hardware_lock, flags); -- cgit v1.2.2 From 821d6e5413481a57bbe1c2722dbe1fee4ff675c4 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Wed, 28 Apr 2010 11:41:21 +0530 Subject: [SCSI] qla4xxx: do not retry login to CHAP auth failed targets Per RFC 3720, Login Response Status Code 0x02 should not be retried. Condensed connection error checking code to a single routine, and added check for status class 0x02. Signed-off-by: Karen Higgins Signed-off-by: Vikas Chaudhary Signed-off-by: Ravi Anand Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_glbl.h | 5 +- drivers/scsi/qla4xxx/ql4_init.c | 130 +++++++++++++++++++++++++++------------- drivers/scsi/qla4xxx/ql4_isr.c | 2 +- 3 files changed, 94 insertions(+), 43 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index 96ebfb021f6c..987658f5bc13 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -67,11 +67,12 @@ struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t index); void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb); int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host * ha); -int qla4xxx_process_ddb_changed(struct scsi_qla_host * ha, - uint32_t fw_ddb_index, uint32_t state); +int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + uint32_t state, uint32_t conn_error); void qla4xxx_dump_buffer(void *b, uint32_t size); int qla4xxx_send_marker_iocb(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry, int lun, uint16_t mrkr_mod); +int qla4_is_relogin_allowed(struct scsi_qla_host *ha, uint32_t conn_err); extern int ql4xextended_error_logging; extern int ql4xdiscoverywait; diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index beaeb18a66ab..5510df8a7fa6 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -505,6 +505,7 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, struct dev_db_entry *fw_ddb_entry = NULL; dma_addr_t fw_ddb_entry_dma; int status = QLA_ERROR; + uint32_t conn_err; if (ddb_entry == NULL) { DEBUG2(printk("scsi%ld: %s: ddb_entry is NULL\n", ha->host_no, @@ -525,7 +526,7 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry, fw_ddb_entry_dma, NULL, NULL, - &ddb_entry->fw_ddb_device_state, NULL, + &ddb_entry->fw_ddb_device_state, &conn_err, &ddb_entry->tcp_source_port_num, &ddb_entry->connection_id) == QLA_ERROR) { @@ -578,12 +579,26 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, fw_ddb_entry->link_local_ipv6_addr, min(sizeof(ddb_entry->link_local_ipv6_addr), sizeof(fw_ddb_entry->link_local_ipv6_addr))); - } - - DEBUG2(printk("scsi%ld: %s: ddb[%d] - State= %x status= %d.\n", - ha->host_no, __func__, fw_ddb_index, - ddb_entry->fw_ddb_device_state, status)); + DEBUG2(dev_info(&ha->pdev->dev, "%s: DDB[%d] osIdx = %d " + "State %04x ConnErr %08x IP %pI6 " + ":%04d \"%s\"\n", + __func__, fw_ddb_index, + ddb_entry->os_target_id, + ddb_entry->fw_ddb_device_state, + conn_err, fw_ddb_entry->ip_addr, + le16_to_cpu(fw_ddb_entry->port), + fw_ddb_entry->iscsi_name)); + } else + DEBUG2(dev_info(&ha->pdev->dev, "%s: DDB[%d] osIdx = %d " + "State %04x ConnErr %08x IP %pI4 " + ":%04d \"%s\"\n", + __func__, fw_ddb_index, + ddb_entry->os_target_id, + ddb_entry->fw_ddb_device_state, + conn_err, fw_ddb_entry->ip_addr, + le16_to_cpu(fw_ddb_entry->port), + fw_ddb_entry->iscsi_name)); exit_update_ddb: if (fw_ddb_entry) dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), @@ -629,6 +644,40 @@ static struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host *ha, return ddb_entry; } +/** + * qla4_is_relogin_allowed - Are we allowed to login? + * @ha: Pointer to host adapter structure. + * @conn_err: Last connection error associated with the ddb + * + * This routine tests the given connection error to determine if + * we are allowed to login. + **/ +int qla4_is_relogin_allowed(struct scsi_qla_host *ha, uint32_t conn_err) +{ + uint32_t err_code, login_rsp_sts_class; + int relogin = 1; + + err_code = ((conn_err & 0x00ff0000) >> 16); + login_rsp_sts_class = ((conn_err & 0x0000ff00) >> 8); + if (err_code == 0x1c || err_code == 0x06) { + DEBUG2(dev_info(&ha->pdev->dev, + ": conn_err=0x%08x, send target completed" + " or access denied failure\n", conn_err)); + relogin = 0; + } + if ((err_code == 0x08) && (login_rsp_sts_class == 0x02)) { + /* Login Response PDU returned an error. + Login Response Status in Error Code Detail + indicates login should not be retried.*/ + DEBUG2(dev_info(&ha->pdev->dev, + ": conn_err=0x%08x, do not retry relogin\n", + conn_err)); + relogin = 0; + } + + return relogin; +} + /** * qla4xxx_configure_ddbs - builds driver ddb list * @ha: Pointer to host adapter structure. @@ -643,18 +692,30 @@ static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha) uint32_t fw_ddb_index = 0; uint32_t next_fw_ddb_index = 0; uint32_t ddb_state; - uint32_t conn_err, err_code; + uint32_t conn_err; struct ddb_entry *ddb_entry; + struct dev_db_entry *fw_ddb_entry = NULL; + dma_addr_t fw_ddb_entry_dma; + uint32_t ipv6_device; uint32_t new_tgt; + fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), + &fw_ddb_entry_dma, GFP_KERNEL); + if (fw_ddb_entry == NULL) { + DEBUG2(dev_info(&ha->pdev->dev, "%s: DMA alloc failed\n", + __func__)); + return QLA_ERROR; + } + dev_info(&ha->pdev->dev, "Initializing DDBs ...\n"); for (fw_ddb_index = 0; fw_ddb_index < MAX_DDB_ENTRIES; fw_ddb_index = next_fw_ddb_index) { /* First, let's see if a device exists here */ - if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, NULL, 0, NULL, - &next_fw_ddb_index, &ddb_state, - &conn_err, NULL, NULL) == - QLA_ERROR) { + if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, fw_ddb_entry, + 0, NULL, &next_fw_ddb_index, + &ddb_state, &conn_err, + NULL, NULL) == + QLA_ERROR) { DEBUG2(printk("scsi%ld: %s: get_ddb_entry, " "fw_ddb_index %d failed", ha->host_no, __func__, fw_ddb_index)); @@ -671,18 +732,19 @@ static int qla4xxx_build_ddb_list(struct scsi_qla_host *ha) /* Try and login to device */ DEBUG2(printk("scsi%ld: %s: Login to DDB[%d]\n", ha->host_no, __func__, fw_ddb_index)); - err_code = ((conn_err & 0x00ff0000) >> 16); - if (err_code == 0x1c || err_code == 0x06) { - DEBUG2(printk("scsi%ld: %s send target " - "completed " - "or access denied failure\n", - ha->host_no, __func__)); - } else { + ipv6_device = le16_to_cpu(fw_ddb_entry->options) & + DDB_OPT_IPV6_DEVICE; + if (qla4_is_relogin_allowed(ha, conn_err) && + ((!ipv6_device && + *((uint32_t *)fw_ddb_entry->ip_addr)) + || ipv6_device)) { qla4xxx_set_ddb_entry(ha, fw_ddb_index, 0); if (qla4xxx_get_fwddb_entry(ha, fw_ddb_index, - NULL, 0, NULL, &next_fw_ddb_index, - &ddb_state, &conn_err, NULL, NULL) - == QLA_ERROR) { + NULL, 0, NULL, + &next_fw_ddb_index, + &ddb_state, &conn_err, + NULL, NULL) + == QLA_ERROR) { DEBUG2(printk("scsi%ld: %s:" "get_ddb_entry %d failed\n", ha->host_no, @@ -737,7 +799,6 @@ next_one: struct qla4_relog_scan { int halt_wait; uint32_t conn_err; - uint32_t err_code; uint32_t fw_ddb_index; uint32_t next_fw_ddb_index; uint32_t fw_ddb_device_state; @@ -747,18 +808,7 @@ static int qla4_test_rdy(struct scsi_qla_host *ha, struct qla4_relog_scan *rs) { struct ddb_entry *ddb_entry; - /* - * Don't want to do a relogin if connection - * error is 0x1c. - */ - rs->err_code = ((rs->conn_err & 0x00ff0000) >> 16); - if (rs->err_code == 0x1c || rs->err_code == 0x06) { - DEBUG2(printk( - "scsi%ld: %s send target" - " completed or " - "access denied failure\n", - ha->host_no, __func__)); - } else { + if (qla4_is_relogin_allowed(ha, rs->conn_err)) { /* We either have a device that is in * the process of relogging in or a * device that is waiting to be @@ -1411,8 +1461,8 @@ static void qla4xxx_add_device_dynamically(struct scsi_qla_host *ha, * * This routine processes a Decive Database Changed AEN Event. **/ -int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, - uint32_t fw_ddb_index, uint32_t state) +int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + uint32_t state, uint32_t conn_err) { struct ddb_entry * ddb_entry; uint32_t old_fw_ddb_device_state; @@ -1470,13 +1520,13 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, /* * Relogin if device state changed to a not active state. - * However, do not relogin if this aen is a result of an IOCTL - * logout (DF_NO_RELOGIN) or if this is a discovered device. + * However, do not relogin if a RELOGIN is in process, or + * we are not allowed to relogin to this DDB. */ if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_FAILED && !test_bit(DF_RELOGIN, &ddb_entry->flags) && !test_bit(DF_NO_RELOGIN, &ddb_entry->flags) && - !test_bit(DF_ISNS_DISCOVERED, &ddb_entry->flags)) { + qla4_is_relogin_allowed(ha, conn_err)) { /* * This triggers a relogin. After the relogin_timer * expires, the relogin gets scheduled. We must wait a @@ -1484,7 +1534,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, * with failed device_state or a logout response before * we can issue another relogin. */ - /* Firmware padds this timeout: (time2wait +1). + /* Firmware pads this timeout: (time2wait +1). * Driver retry to login should be longer than F/W. * Otherwise F/W will fail * set_ddb() mbx cmd with 0x4005 since it still diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index 9db286df7ca0..ce5838eb685e 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -838,7 +838,7 @@ void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen) qla4xxx_reinitialize_ddb_list(ha); } else if (mbox_sts[1] == 1) { /* Specific device. */ qla4xxx_process_ddb_changed(ha, mbox_sts[2], - mbox_sts[3]); + mbox_sts[3], mbox_sts[4]); } break; } -- cgit v1.2.2 From 5369887a95da9509163931b21f61a94da09dac15 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Wed, 28 Apr 2010 11:41:59 +0530 Subject: [SCSI] qla4xxx: correct use of cmd->host_scribble used cmd->host_scribble to store iocb command handle. Signed-off-by: Vikas Chaudhary Signed-off-by: Ravi Anand Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 2 ++ drivers/scsi/qla4xxx/ql4_iocb.c | 2 +- drivers/scsi/qla4xxx/ql4_os.c | 18 ++++++++++-------- 3 files changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 1e56b8ee19bb..b6f2d0152454 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -148,6 +148,8 @@ #define MAX_RESET_HA_RETRIES 2 +#define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr) + /* * SCSI Request Block structure (srb) that is placed * on cmd->SCp location of every I/O [We have 22 bytes available] diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c index e0c32159749c..e66f3f263f49 100644 --- a/drivers/scsi/qla4xxx/ql4_iocb.c +++ b/drivers/scsi/qla4xxx/ql4_iocb.c @@ -299,7 +299,7 @@ int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb * srb) qla4xxx_build_scsi_iocbs(srb, cmd_entry, tot_dsds); wmb(); - srb->cmd->host_scribble = (unsigned char *)srb; + srb->cmd->host_scribble = (unsigned char *)(unsigned long)index; /* update counters */ srb->state = SRB_ACTIVE_STATE; diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index d6c8b429a675..2ca43f0ebcd6 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -389,7 +389,7 @@ static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha, srb->ddb = ddb_entry; srb->cmd = cmd; srb->flags = 0; - cmd->SCp.ptr = (void *)srb; + CMD_SP(cmd) = (void *)srb; cmd->scsi_done = done; return srb; @@ -403,7 +403,7 @@ static void qla4xxx_srb_free_dma(struct scsi_qla_host *ha, struct srb *srb) scsi_dma_unmap(cmd); srb->flags &= ~SRB_DMA_VALID; } - cmd->SCp.ptr = NULL; + CMD_SP(cmd) = NULL; } void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb) @@ -891,7 +891,6 @@ static void qla4xxx_flush_active_srbs(struct scsi_qla_host *ha) } } spin_unlock_irqrestore(&ha->hardware_lock, flags); - } /** @@ -1479,12 +1478,14 @@ static void qla4xxx_slave_destroy(struct scsi_device *sdev) struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t index) { struct srb *srb = NULL; - struct scsi_cmnd *cmd; + struct scsi_cmnd *cmd = NULL; - if (!(cmd = scsi_host_find_tag(ha->host, index))) + cmd = scsi_host_find_tag(ha->host, index); + if (!cmd) return srb; - if (!(srb = (struct srb *)cmd->host_scribble)) + srb = (struct srb *)CMD_SP(cmd); + if (!srb) return srb; /* update counters */ @@ -1492,7 +1493,8 @@ struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t in ha->req_q_count += srb->iocb_cnt; ha->iocb_cnt -= srb->iocb_cnt; if (srb->cmd) - srb->cmd->host_scribble = NULL; + srb->cmd->host_scribble = + (unsigned char *)(unsigned long) MAX_SRBS; } return srb; } @@ -1514,7 +1516,7 @@ static int qla4xxx_eh_wait_on_command(struct scsi_qla_host *ha, do { /* Checking to see if its returned to OS */ - rp = (struct srb *) cmd->SCp.ptr; + rp = (struct srb *) CMD_SP(cmd); if (rp == NULL) { done++; break; -- cgit v1.2.2 From 09a0f719896659a6c32df11426e55795012c06ff Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Wed, 28 Apr 2010 11:42:24 +0530 Subject: [SCSI] qla4xxx: added support for abort task management command * Handles SCSI command aborts. * Serialization srb between error handler and command completion path. Signed-off-by: Vikas Chaudhary Signed-off-by: Ravi Anand Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 2 +- drivers/scsi/qla4xxx/ql4_fw.h | 1 + drivers/scsi/qla4xxx/ql4_glbl.h | 3 +- drivers/scsi/qla4xxx/ql4_isr.c | 6 ++-- drivers/scsi/qla4xxx/ql4_mbx.c | 53 ++++++++++++++++++++++++++++++++ drivers/scsi/qla4xxx/ql4_os.c | 68 ++++++++++++++++++++++++++++++++++++++--- 6 files changed, 124 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index b6f2d0152454..428802616e33 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -172,7 +172,7 @@ struct srb { struct scsi_cmnd *cmd; /* (4) SCSI command block */ dma_addr_t dma_handle; /* (4) for unmap of single transfers */ - atomic_t ref_count; /* reference count for this srb */ + struct kref srb_ref; /* reference count for this srb */ uint32_t fw_ddb_index; uint8_t err_id; /* error id */ #define SRB_ERR_PORT 1 /* Request failed because "port down" */ diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index dfe7b4dd3912..855226e08665 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -215,6 +215,7 @@ union external_hw_config_reg { /* Mailbox command definitions */ #define MBOX_CMD_ABOUT_FW 0x0009 #define MBOX_CMD_PING 0x000B +#define MBOX_CMD_ABORT_TASK 0x0015 #define MBOX_CMD_LUN_RESET 0x0016 #define MBOX_CMD_TARGET_WARM_RESET 0x0017 #define MBOX_CMD_GET_MANAGEMENT_DATA 0x001E diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index 987658f5bc13..c4636f6cb3cb 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -25,6 +25,7 @@ void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen); int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha); int qla4xxx_relogin_device(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry); +int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb); int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry, int lun); int qla4xxx_reset_target(struct scsi_qla_host * ha, @@ -65,7 +66,7 @@ void qla4xxx_interrupt_service_routine(struct scsi_qla_host * ha, int qla4xxx_init_rings(struct scsi_qla_host * ha); struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t index); -void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb); +void qla4xxx_srb_compl(struct kref *ref); int qla4xxx_reinitialize_ddb_list(struct scsi_qla_host * ha); int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, uint32_t state, uint32_t conn_error); diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index ce5838eb685e..596c3031483c 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -97,7 +97,7 @@ qla4xxx_status_cont_entry(struct scsi_qla_host *ha, /* Place command on done queue. */ if (srb->req_sense_len == 0) { - qla4xxx_srb_compl(ha, srb); + kref_put(&srb->srb_ref, qla4xxx_srb_compl); ha->status_srb = NULL; } } @@ -329,7 +329,7 @@ status_entry_exit: /* complete the request, if not waiting for status_continuation pkt */ srb->cc_stat = sts_entry->completionStatus; if (ha->status_srb == NULL) - qla4xxx_srb_compl(ha, srb); + kref_put(&srb->srb_ref, qla4xxx_srb_compl); } /** @@ -393,7 +393,7 @@ static void qla4xxx_process_response_queue(struct scsi_qla_host * ha) /* ETRY normally by sending it back with * DID_BUS_BUSY */ srb->cmd->result = DID_BUS_BUSY << 16; - qla4xxx_srb_compl(ha, srb); + kref_put(&srb->srb_ref, qla4xxx_srb_compl); break; case ET_CONTINUE: diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index 43581ce3a1b6..e1315cd8c261 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -761,6 +761,59 @@ exit_get_event_log: event_log_dma); } +/** + * qla4xxx_abort_task - issues Abort Task + * @ha: Pointer to host adapter structure. + * @srb: Pointer to srb entry + * + * This routine performs a LUN RESET on the specified target/lun. + * The caller must ensure that the ddb_entry and lun_entry pointers + * are valid before calling this routine. + **/ +int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb) +{ + uint32_t mbox_cmd[MBOX_REG_COUNT]; + uint32_t mbox_sts[MBOX_REG_COUNT]; + struct scsi_cmnd *cmd = srb->cmd; + int status = QLA_SUCCESS; + unsigned long flags = 0; + uint32_t index; + + /* + * Send abort task command to ISP, so that the ISP will return + * request with ABORT status + */ + memset(&mbox_cmd, 0, sizeof(mbox_cmd)); + memset(&mbox_sts, 0, sizeof(mbox_sts)); + + spin_lock_irqsave(&ha->hardware_lock, flags); + index = (unsigned long)(unsigned char *)cmd->host_scribble; + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Firmware already posted completion on response queue */ + if (index == MAX_SRBS) + return status; + + mbox_cmd[0] = MBOX_CMD_ABORT_TASK; + mbox_cmd[1] = srb->fw_ddb_index; + mbox_cmd[2] = index; + /* Immediate Command Enable */ + mbox_cmd[5] = 0x01; + + qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], + &mbox_sts[0]); + if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE) { + status = QLA_ERROR; + + DEBUG2(printk(KERN_WARNING "scsi%ld:%d:%d: abort task FAILED: " + "mbx0=%04X, mb1=%04X, mb2=%04X, mb3=%04X, mb4=%04X\n", + ha->host_no, cmd->device->id, cmd->device->lun, mbox_sts[0], + mbox_sts[1], mbox_sts[2], mbox_sts[3], mbox_sts[4])); + } + + return status; +} + /** * qla4xxx_reset_lun - issues LUN Reset * @ha: Pointer to host adapter structure. diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 2ca43f0ebcd6..38b1d38afca5 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -74,6 +74,7 @@ static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc); */ static int qla4xxx_queuecommand(struct scsi_cmnd *cmd, void (*done) (struct scsi_cmnd *)); +static int qla4xxx_eh_abort(struct scsi_cmnd *cmd); static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd); static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd); static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd); @@ -88,6 +89,7 @@ static struct scsi_host_template qla4xxx_driver_template = { .proc_name = DRIVER_NAME, .queuecommand = qla4xxx_queuecommand, + .eh_abort_handler = qla4xxx_eh_abort, .eh_device_reset_handler = qla4xxx_eh_device_reset, .eh_target_reset_handler = qla4xxx_eh_target_reset, .eh_host_reset_handler = qla4xxx_eh_host_reset, @@ -384,7 +386,7 @@ static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha, if (!srb) return srb; - atomic_set(&srb->ref_count, 1); + kref_init(&srb->srb_ref); srb->ha = ha; srb->ddb = ddb_entry; srb->cmd = cmd; @@ -406,9 +408,11 @@ static void qla4xxx_srb_free_dma(struct scsi_qla_host *ha, struct srb *srb) CMD_SP(cmd) = NULL; } -void qla4xxx_srb_compl(struct scsi_qla_host *ha, struct srb *srb) +void qla4xxx_srb_compl(struct kref *ref) { + struct srb *srb = container_of(ref, struct srb, srb_ref); struct scsi_cmnd *cmd = srb->cmd; + struct scsi_qla_host *ha = srb->ha; qla4xxx_srb_free_dma(ha, srb); @@ -887,7 +891,7 @@ static void qla4xxx_flush_active_srbs(struct scsi_qla_host *ha) srb = qla4xxx_del_from_active_array(ha, i); if (srb != NULL) { srb->cmd->result = DID_RESET << 16; - qla4xxx_srb_compl(ha, srb); + kref_put(&srb->srb_ref, qla4xxx_srb_compl); } } spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -1501,7 +1505,7 @@ struct srb * qla4xxx_del_from_active_array(struct scsi_qla_host *ha, uint32_t in /** * qla4xxx_eh_wait_on_command - waits for command to be returned by firmware - * @ha: actual ha whose done queue will contain the comd returned by firmware. + * @ha: Pointer to host adapter structure. * @cmd: Scsi Command to wait on. * * This routine waits for the command to be returned by the Firmware @@ -1584,6 +1588,62 @@ static int qla4xxx_eh_wait_for_commands(struct scsi_qla_host *ha, return status; } +/** + * qla4xxx_eh_abort - callback for abort task. + * @cmd: Pointer to Linux's SCSI command structure + * + * This routine is called by the Linux OS to abort the specified + * command. + **/ +static int qla4xxx_eh_abort(struct scsi_cmnd *cmd) +{ + struct scsi_qla_host *ha = to_qla_host(cmd->device->host); + unsigned int id = cmd->device->id; + unsigned int lun = cmd->device->lun; + unsigned long serial = cmd->serial_number; + struct srb *srb = NULL; + int ret = SUCCESS; + int wait = 0; + + dev_info(&ha->pdev->dev, + "scsi%ld:%d:%d: Abort command issued cmd=%p, pid=%ld\n", + ha->host_no, id, lun, cmd, serial); + + srb = (struct srb *) CMD_SP(cmd); + + if (!srb) + return SUCCESS; + + kref_get(&srb->srb_ref); + + if (qla4xxx_abort_task(ha, srb) != QLA_SUCCESS) { + DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx failed.\n", + ha->host_no, id, lun)); + ret = FAILED; + } else { + DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx success.\n", + ha->host_no, id, lun)); + wait = 1; + } + + kref_put(&srb->srb_ref, qla4xxx_srb_compl); + + /* Wait for command to complete */ + if (wait) { + if (!qla4xxx_eh_wait_on_command(ha, cmd)) { + DEBUG2(printk("scsi%ld:%d:%d: Abort handler timed out\n", + ha->host_no, id, lun)); + ret = FAILED; + } + } + + dev_info(&ha->pdev->dev, + "scsi%ld:%d:%d: Abort command - %s\n", + ha->host_no, id, lun, (ret == SUCCESS) ? "succeded" : "failed"); + + return ret; +} + /** * qla4xxx_eh_device_reset - callback for target reset. * @cmd: Pointer to Linux's SCSI command structure -- cgit v1.2.2 From 1a6633da200909e9c71ba7a0c40eebe56746c3f5 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Wed, 28 Apr 2010 11:45:06 +0530 Subject: [SCSI] qla4xxx: Update driver version to 5.02.00-k1 Signed-off-by: Vikas Chaudhary Signed-off-by: Ravi Anand Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_version.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index 6980cb279c81..28a6c494a2e8 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,5 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.01.00-k9" - +#define QLA4XXX_DRIVER_VERSION "5.02.00-k1" -- cgit v1.2.2 From 883c98feaab708d0fc976225b146aa9307023c85 Mon Sep 17 00:00:00 2001 From: Ravi Anand Date: Wed, 28 Apr 2010 11:45:49 +0530 Subject: [SCSI] Adding MAINTAINERS for qla4xxx iSCSI driver. Signed-off-by: Ravi Anand Signed-off-by: James Bottomley --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 9ca2fbbe5255..fd7e80b62741 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4560,6 +4560,14 @@ S: Supported F: Documentation/scsi/LICENSE.qla2xxx F: drivers/scsi/qla2xxx/ +QLOGIC QLA4XXX iSCSI DRIVER +M: Ravi Anand +M: Vikas Chaudhary +M: iscsi-driver@qlogic.com +L: linux-scsi@vger.kernel.org +S: Supported +F: drivers/scsi/qla4xxx/ + QLOGIC QLA3XXX NETWORK DRIVER M: Ron Mercer M: linux-driver@qlogic.com -- cgit v1.2.2 From 683229845f1780b10041ee7a1043fc8f10061455 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 30 Apr 2010 18:09:33 +0200 Subject: [SCSI] zfcp: Report scatter-gather limits to SCSI and block layer Instead of dealing with large segments in the scatter-gather lists in zfcp_qdio.c, report the limits to the upper layers. With these limits in place, the code for mapping large data blocks to multiple sbales can be removed. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_aux.c | 4 ++++ drivers/s390/scsi/zfcp_def.h | 1 + drivers/s390/scsi/zfcp_qdio.c | 45 +++++++++++-------------------------------- drivers/s390/scsi/zfcp_qdio.h | 2 ++ drivers/s390/scsi/zfcp_scsi.c | 1 + 5 files changed, 19 insertions(+), 34 deletions(-) diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 1e6183a86ce5..abf33db647ff 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -545,6 +545,10 @@ struct zfcp_adapter *zfcp_adapter_enqueue(struct ccw_device *ccw_device) &zfcp_sysfs_adapter_attrs)) goto failed; + /* report size limit per scatter-gather segment */ + adapter->dma_parms.max_segment_size = ZFCP_QDIO_SBALE_LEN; + adapter->ccw_device->dev.dma_parms = &adapter->dma_parms; + if (!zfcp_adapter_scsi_register(adapter)) return adapter; diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 7131c7db1f04..72132c13f45b 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -205,6 +205,7 @@ struct zfcp_adapter { struct work_struct scan_work; struct service_level service_level; struct workqueue_struct *work_queue; + struct device_dma_parameters dma_parms; }; struct zfcp_port { diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index dbfa312a7f50..aa68515abe21 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -206,35 +206,6 @@ static void zfcp_qdio_undo_sbals(struct zfcp_qdio *qdio, zfcp_qdio_zero_sbals(sbal, first, count); } -static int zfcp_qdio_fill_sbals(struct zfcp_qdio *qdio, - struct zfcp_qdio_req *q_req, - unsigned int sbtype, void *start_addr, - unsigned int total_length) -{ - struct qdio_buffer_element *sbale; - unsigned long remaining, length; - void *addr; - - /* split segment up */ - for (addr = start_addr, remaining = total_length; remaining > 0; - addr += length, remaining -= length) { - sbale = zfcp_qdio_sbale_next(qdio, q_req, sbtype); - if (!sbale) { - atomic_inc(&qdio->req_q_full); - zfcp_qdio_undo_sbals(qdio, q_req); - return -EINVAL; - } - - /* new piece must not exceed next page boundary */ - length = min(remaining, - (PAGE_SIZE - ((unsigned long)addr & - (PAGE_SIZE - 1)))); - sbale->addr = addr; - sbale->length = length; - } - return 0; -} - /** * zfcp_qdio_sbals_from_sg - fill SBALs from scatter-gather list * @fsf_req: request to be processed @@ -248,7 +219,7 @@ int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, int max_sbals) { struct qdio_buffer_element *sbale; - int retval, bytes = 0; + int bytes = 0; /* figure out last allowed SBAL */ zfcp_qdio_sbal_limit(qdio, q_req, max_sbals); @@ -258,10 +229,16 @@ int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, sbale->flags |= sbtype; for (; sg; sg = sg_next(sg)) { - retval = zfcp_qdio_fill_sbals(qdio, q_req, sbtype, - sg_virt(sg), sg->length); - if (retval < 0) - return retval; + sbale = zfcp_qdio_sbale_next(qdio, q_req, sbtype); + if (!sbale) { + atomic_inc(&qdio->req_q_full); + zfcp_qdio_undo_sbals(qdio, q_req); + return -EINVAL; + } + + sbale->addr = sg_virt(sg); + sbale->length = sg->length; + bytes += sg->length; } diff --git a/drivers/s390/scsi/zfcp_qdio.h b/drivers/s390/scsi/zfcp_qdio.h index 8cca54631e1e..f2b5a363bb84 100644 --- a/drivers/s390/scsi/zfcp_qdio.h +++ b/drivers/s390/scsi/zfcp_qdio.h @@ -11,6 +11,8 @@ #include +#define ZFCP_QDIO_SBALE_LEN PAGE_SIZE + /** * struct zfcp_qdio_queue - qdio queue buffer, zfcp index and free count * @sbal: qdio buffers diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index d13eb9a6408a..066b0507a639 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -682,6 +682,7 @@ struct zfcp_data zfcp_data = { .use_clustering = 1, .sdev_attrs = zfcp_sysfs_sdev_attrs, .max_sectors = (ZFCP_MAX_SBALES_PER_REQ * 8), + .dma_boundary = ZFCP_QDIO_SBALE_LEN - 1, .shost_attrs = zfcp_sysfs_shost_attrs, }, }; -- cgit v1.2.2 From 1674b4054744c2cfd6573e43eca45d86ff581d0e Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 30 Apr 2010 18:09:34 +0200 Subject: [SCSI] zfcp: Move sbale handling to zfcp_qdio files Move the code accessing the qdio sbales and zfcp_qdio_req struct to the zfcp_qdio files and provide helper functions for accessing the qdio related parts. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_def.h | 17 ---- drivers/s390/scsi/zfcp_ext.h | 5 +- drivers/s390/scsi/zfcp_fsf.c | 180 ++++++++++++++++-------------------------- drivers/s390/scsi/zfcp_fsf.h | 9 ++- drivers/s390/scsi/zfcp_qdio.c | 25 +++--- drivers/s390/scsi/zfcp_qdio.h | 102 ++++++++++++++++++++++++ drivers/s390/scsi/zfcp_scsi.c | 4 +- 7 files changed, 191 insertions(+), 151 deletions(-) diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 72132c13f45b..0b2ae60a6f9f 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -44,23 +44,6 @@ struct zfcp_reqlist; /********************* SCSI SPECIFIC DEFINES *********************************/ #define ZFCP_SCSI_ER_TIMEOUT (10*HZ) -/********************* CIO/QDIO SPECIFIC DEFINES *****************************/ - -/* DMQ bug workaround: don't use last SBALE */ -#define ZFCP_MAX_SBALES_PER_SBAL (QDIO_MAX_ELEMENTS_PER_BUFFER - 1) - -/* index of last SBALE (with respect to DMQ bug workaround) */ -#define ZFCP_LAST_SBALE_PER_SBAL (ZFCP_MAX_SBALES_PER_SBAL - 1) - -/* max. number of (data buffer) SBALEs in largest SBAL chain */ -#define ZFCP_MAX_SBALES_PER_REQ \ - (FSF_MAX_SBALS_PER_REQ * ZFCP_MAX_SBALES_PER_SBAL - 2) - /* request ID + QTCB in SBALE 0 + 1 of first SBAL in chain */ - -#define ZFCP_MAX_SECTORS (ZFCP_MAX_SBALES_PER_REQ * 8) - /* max. number of (data buffer) SBALEs in largest SBAL chain - multiplied with number of sectors per 4k block */ - /********************* FSF SPECIFIC DEFINES *********************************/ /* ATTENTION: value must not be used by hardware */ diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 8786a79c7f8f..172da12a2d02 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -3,7 +3,7 @@ * * External function declarations. * - * Copyright IBM Corporation 2002, 2009 + * Copyright IBM Corporation 2002, 2010 */ #ifndef ZFCP_EXT_H @@ -144,8 +144,7 @@ extern void zfcp_fsf_reqid_check(struct zfcp_qdio *, int); extern int zfcp_qdio_setup(struct zfcp_adapter *); extern void zfcp_qdio_destroy(struct zfcp_qdio *); extern int zfcp_qdio_send(struct zfcp_qdio *, struct zfcp_qdio_req *); -extern int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *, - struct zfcp_qdio_req *, unsigned long, +extern int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *, struct zfcp_qdio_req *, struct scatterlist *, int); extern int zfcp_qdio_open(struct zfcp_qdio *); extern void zfcp_qdio_close(struct zfcp_qdio *); diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 18564891ea61..ec1b49a75532 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -705,10 +705,9 @@ static struct fsf_qtcb *zfcp_qtcb_alloc(mempool_t *pool) } static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_qdio *qdio, - u32 fsf_cmd, mempool_t *pool) + u32 fsf_cmd, u32 sbtype, + mempool_t *pool) { - struct qdio_buffer_element *sbale; - struct zfcp_qdio_queue *req_q = &qdio->req_q; struct zfcp_adapter *adapter = qdio->adapter; struct zfcp_fsf_req *req = zfcp_fsf_alloc(pool); @@ -725,14 +724,6 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_qdio *qdio, req->adapter = adapter; req->fsf_command = fsf_cmd; req->req_id = adapter->req_no; - req->qdio_req.sbal_number = 1; - req->qdio_req.sbal_first = req_q->first; - req->qdio_req.sbal_last = req_q->first; - req->qdio_req.sbale_curr = 1; - - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].addr = (void *) req->req_id; - sbale[0].flags |= SBAL_FLAGS0_COMMAND; if (likely(fsf_cmd != FSF_QTCB_UNSOLICITED_STATUS)) { if (likely(pool)) @@ -753,10 +744,11 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_qdio *qdio, req->qtcb->prefix.qtcb_version = FSF_QTCB_CURRENT_VERSION; req->qtcb->header.req_handle = req->req_id; req->qtcb->header.fsf_command = req->fsf_command; - sbale[1].addr = (void *) req->qtcb; - sbale[1].length = sizeof(struct fsf_qtcb); } + zfcp_qdio_req_init(adapter->qdio, &req->qdio_req, req->req_id, sbtype, + req->qtcb, sizeof(struct fsf_qtcb)); + if (!(atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP)) { zfcp_fsf_req_free(req); return ERR_PTR(-EIO); @@ -803,24 +795,19 @@ int zfcp_fsf_status_read(struct zfcp_qdio *qdio) struct zfcp_adapter *adapter = qdio->adapter; struct zfcp_fsf_req *req; struct fsf_status_read_buffer *sr_buf; - struct qdio_buffer_element *sbale; int retval = -EIO; spin_lock_bh(&qdio->req_q_lock); if (zfcp_fsf_req_sbal_get(qdio)) goto out; - req = zfcp_fsf_req_create(qdio, FSF_QTCB_UNSOLICITED_STATUS, + req = zfcp_fsf_req_create(qdio, FSF_QTCB_UNSOLICITED_STATUS, 0, adapter->pool.status_read_req); if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[2].flags |= SBAL_FLAGS_LAST_ENTRY; - req->qdio_req.sbale_curr = 2; - sr_buf = mempool_alloc(adapter->pool.status_read_data, GFP_ATOMIC); if (!sr_buf) { retval = -ENOMEM; @@ -828,9 +815,9 @@ int zfcp_fsf_status_read(struct zfcp_qdio *qdio) } memset(sr_buf, 0, sizeof(*sr_buf)); req->data = sr_buf; - sbale = zfcp_qdio_sbale_curr(qdio, &req->qdio_req); - sbale->addr = (void *) sr_buf; - sbale->length = sizeof(*sr_buf); + + zfcp_qdio_fill_next(qdio, &req->qdio_req, sr_buf, sizeof(*sr_buf)); + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); retval = zfcp_fsf_req_send(req); if (retval) @@ -907,7 +894,6 @@ static void zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *req) struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, struct zfcp_unit *unit) { - struct qdio_buffer_element *sbale; struct zfcp_fsf_req *req = NULL; struct zfcp_qdio *qdio = unit->port->adapter->qdio; @@ -915,6 +901,7 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, if (zfcp_fsf_req_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_ABORT_FCP_CMND, + SBAL_FLAGS0_TYPE_READ, qdio->adapter->pool.scsi_abort); if (IS_ERR(req)) { req = NULL; @@ -925,9 +912,7 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, ZFCP_STATUS_COMMON_UNBLOCKED))) goto out_error_free; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->data = unit; req->handler = zfcp_fsf_abort_fcp_command_handler; @@ -996,21 +981,14 @@ skip_fsfstatus: ct->handler(ct->handler_data); } -static void zfcp_fsf_setup_ct_els_unchained(struct qdio_buffer_element *sbale, +static void zfcp_fsf_setup_ct_els_unchained(struct zfcp_qdio *qdio, + struct zfcp_qdio_req *q_req, struct scatterlist *sg_req, struct scatterlist *sg_resp) { - sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE_READ; - sbale[2].addr = sg_virt(sg_req); - sbale[2].length = sg_req->length; - sbale[3].addr = sg_virt(sg_resp); - sbale[3].length = sg_resp->length; - sbale[3].flags |= SBAL_FLAGS_LAST_ENTRY; -} - -static int zfcp_fsf_one_sbal(struct scatterlist *sg) -{ - return sg_is_last(sg) && sg->length <= PAGE_SIZE; + zfcp_qdio_fill_next(qdio, q_req, sg_virt(sg_req), sg_req->length); + zfcp_qdio_fill_next(qdio, q_req, sg_virt(sg_resp), sg_resp->length); + zfcp_qdio_set_sbale_last(qdio, q_req); } static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req, @@ -1019,35 +997,34 @@ static int zfcp_fsf_setup_ct_els_sbals(struct zfcp_fsf_req *req, int max_sbals) { struct zfcp_adapter *adapter = req->adapter; - struct qdio_buffer_element *sbale = zfcp_qdio_sbale_req(adapter->qdio, - &req->qdio_req); u32 feat = adapter->adapter_features; int bytes; if (!(feat & FSF_FEATURE_ELS_CT_CHAINED_SBALS)) { - if (!zfcp_fsf_one_sbal(sg_req) || !zfcp_fsf_one_sbal(sg_resp)) + if (!zfcp_qdio_sg_one_sbale(sg_req) || + !zfcp_qdio_sg_one_sbale(sg_resp)) return -EOPNOTSUPP; - zfcp_fsf_setup_ct_els_unchained(sbale, sg_req, sg_resp); + zfcp_fsf_setup_ct_els_unchained(adapter->qdio, &req->qdio_req, + sg_req, sg_resp); return 0; } /* use single, unchained SBAL if it can hold the request */ - if (zfcp_fsf_one_sbal(sg_req) && zfcp_fsf_one_sbal(sg_resp)) { - zfcp_fsf_setup_ct_els_unchained(sbale, sg_req, sg_resp); + if (zfcp_qdio_sg_one_sbale(sg_req) || zfcp_qdio_sg_one_sbale(sg_resp)) { + zfcp_fsf_setup_ct_els_unchained(adapter->qdio, &req->qdio_req, + sg_req, sg_resp); return 0; } bytes = zfcp_qdio_sbals_from_sg(adapter->qdio, &req->qdio_req, - SBAL_FLAGS0_TYPE_WRITE_READ, sg_req, max_sbals); if (bytes <= 0) return -EIO; req->qtcb->bottom.support.req_buf_length = bytes; - req->qdio_req.sbale_curr = ZFCP_LAST_SBALE_PER_SBAL; + zfcp_qdio_skip_to_last_sbale(&req->qdio_req); bytes = zfcp_qdio_sbals_from_sg(adapter->qdio, &req->qdio_req, - SBAL_FLAGS0_TYPE_WRITE_READ, sg_resp, max_sbals); req->qtcb->bottom.support.resp_buf_length = bytes; if (bytes <= 0) @@ -1094,7 +1071,8 @@ int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port, if (zfcp_fsf_req_sbal_get(qdio)) goto out; - req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_GENERIC, pool); + req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_GENERIC, + SBAL_FLAGS0_TYPE_WRITE_READ, pool); if (IS_ERR(req)) { ret = PTR_ERR(req); @@ -1103,7 +1081,7 @@ int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port, req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; ret = zfcp_fsf_setup_ct_els(req, ct->req, ct->resp, - FSF_MAX_SBALS_PER_REQ, timeout); + ZFCP_FSF_MAX_SBALS_PER_REQ, timeout); if (ret) goto failed_send; @@ -1190,7 +1168,8 @@ int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id, if (zfcp_fsf_req_sbal_get(qdio)) goto out; - req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_ELS, NULL); + req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_ELS, + SBAL_FLAGS0_TYPE_WRITE_READ, NULL); if (IS_ERR(req)) { ret = PTR_ERR(req); @@ -1224,7 +1203,6 @@ out: int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) { - struct qdio_buffer_element *sbale; struct zfcp_fsf_req *req; struct zfcp_qdio *qdio = erp_action->adapter->qdio; int retval = -EIO; @@ -1234,6 +1212,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA, + SBAL_FLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1242,9 +1221,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->qtcb->bottom.config.feature_selection = FSF_FEATURE_CFDC | @@ -1269,7 +1246,6 @@ out: int zfcp_fsf_exchange_config_data_sync(struct zfcp_qdio *qdio, struct fsf_qtcb_bottom_config *data) { - struct qdio_buffer_element *sbale; struct zfcp_fsf_req *req = NULL; int retval = -EIO; @@ -1277,16 +1253,15 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_qdio *qdio, if (zfcp_fsf_req_sbal_get(qdio)) goto out_unlock; - req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA, NULL); + req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA, + SBAL_FLAGS0_TYPE_READ, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); goto out_unlock; } - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->handler = zfcp_fsf_exchange_config_data_handler; req->qtcb->bottom.config.feature_selection = @@ -1320,7 +1295,6 @@ out_unlock: int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) { struct zfcp_qdio *qdio = erp_action->adapter->qdio; - struct qdio_buffer_element *sbale; struct zfcp_fsf_req *req; int retval = -EIO; @@ -1332,6 +1306,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA, + SBAL_FLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1340,9 +1315,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->handler = zfcp_fsf_exchange_port_data_handler; req->erp_action = erp_action; @@ -1368,7 +1341,6 @@ out: int zfcp_fsf_exchange_port_data_sync(struct zfcp_qdio *qdio, struct fsf_qtcb_bottom_port *data) { - struct qdio_buffer_element *sbale; struct zfcp_fsf_req *req = NULL; int retval = -EIO; @@ -1379,7 +1351,8 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_qdio *qdio, if (zfcp_fsf_req_sbal_get(qdio)) goto out_unlock; - req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA, NULL); + req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA, + SBAL_FLAGS0_TYPE_READ, NULL); if (IS_ERR(req)) { retval = PTR_ERR(req); @@ -1389,9 +1362,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_qdio *qdio, if (data) req->data = data; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->handler = zfcp_fsf_exchange_port_data_handler; zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); @@ -1485,7 +1456,6 @@ out: */ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) { - struct qdio_buffer_element *sbale; struct zfcp_qdio *qdio = erp_action->adapter->qdio; struct zfcp_port *port = erp_action->port; struct zfcp_fsf_req *req; @@ -1496,6 +1466,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID, + SBAL_FLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1504,9 +1475,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->handler = zfcp_fsf_open_port_handler; hton24(req->qtcb->bottom.support.d_id, port->d_id); @@ -1556,7 +1525,6 @@ static void zfcp_fsf_close_port_handler(struct zfcp_fsf_req *req) */ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) { - struct qdio_buffer_element *sbale; struct zfcp_qdio *qdio = erp_action->adapter->qdio; struct zfcp_fsf_req *req; int retval = -EIO; @@ -1566,6 +1534,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT, + SBAL_FLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1574,9 +1543,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->handler = zfcp_fsf_close_port_handler; req->data = erp_action->port; @@ -1633,7 +1600,6 @@ out: */ int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port) { - struct qdio_buffer_element *sbale; struct zfcp_qdio *qdio = wka_port->adapter->qdio; struct zfcp_fsf_req *req; int retval = -EIO; @@ -1643,6 +1609,7 @@ int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID, + SBAL_FLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (unlikely(IS_ERR(req))) { @@ -1651,9 +1618,7 @@ int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port) } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->handler = zfcp_fsf_open_wka_port_handler; hton24(req->qtcb->bottom.support.d_id, wka_port->d_id); @@ -1688,7 +1653,6 @@ static void zfcp_fsf_close_wka_port_handler(struct zfcp_fsf_req *req) */ int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port) { - struct qdio_buffer_element *sbale; struct zfcp_qdio *qdio = wka_port->adapter->qdio; struct zfcp_fsf_req *req; int retval = -EIO; @@ -1698,6 +1662,7 @@ int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT, + SBAL_FLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (unlikely(IS_ERR(req))) { @@ -1706,9 +1671,7 @@ int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port) } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->handler = zfcp_fsf_close_wka_port_handler; req->data = wka_port; @@ -1782,7 +1745,6 @@ static void zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *req) */ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) { - struct qdio_buffer_element *sbale; struct zfcp_qdio *qdio = erp_action->adapter->qdio; struct zfcp_fsf_req *req; int retval = -EIO; @@ -1792,6 +1754,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PHYSICAL_PORT, + SBAL_FLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1800,9 +1763,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->data = erp_action->port; req->qtcb->header.port_handle = erp_action->port->handle; @@ -1954,7 +1915,6 @@ static void zfcp_fsf_open_unit_handler(struct zfcp_fsf_req *req) */ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) { - struct qdio_buffer_element *sbale; struct zfcp_adapter *adapter = erp_action->adapter; struct zfcp_qdio *qdio = adapter->qdio; struct zfcp_fsf_req *req; @@ -1965,6 +1925,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_LUN, + SBAL_FLAGS0_TYPE_READ, adapter->pool.erp_req); if (IS_ERR(req)) { @@ -1973,9 +1934,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->qtcb->header.port_handle = erp_action->port->handle; req->qtcb->bottom.support.fcp_lun = erp_action->unit->fcp_lun; @@ -2041,7 +2000,6 @@ static void zfcp_fsf_close_unit_handler(struct zfcp_fsf_req *req) */ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) { - struct qdio_buffer_element *sbale; struct zfcp_qdio *qdio = erp_action->adapter->qdio; struct zfcp_fsf_req *req; int retval = -EIO; @@ -2051,6 +2009,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_LUN, + SBAL_FLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); if (IS_ERR(req)) { @@ -2059,9 +2018,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); req->qtcb->header.port_handle = erp_action->port->handle; req->qtcb->header.lun_handle = erp_action->unit->handle; @@ -2289,8 +2246,11 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit, goto out; } + if (scsi_cmnd->sc_data_direction == DMA_TO_DEVICE) + sbtype = SBAL_FLAGS0_TYPE_WRITE; + req = zfcp_fsf_req_create(qdio, FSF_QTCB_FCP_CMND, - adapter->pool.scsi_req); + sbtype, adapter->pool.scsi_req); if (IS_ERR(req)) { retval = PTR_ERR(req); @@ -2298,7 +2258,6 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit, } req->status |= ZFCP_STATUS_FSFREQ_CLEANUP; - get_device(&unit->dev); req->unit = unit; req->data = scsi_cmnd; req->handler = zfcp_fsf_send_fcp_command_handler; @@ -2323,20 +2282,21 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *unit, break; case DMA_TO_DEVICE: req->qtcb->bottom.io.data_direction = FSF_DATADIR_WRITE; - sbtype = SBAL_FLAGS0_TYPE_WRITE; break; case DMA_BIDIRECTIONAL: goto failed_scsi_cmnd; } + get_device(&unit->dev); + fcp_cmnd = (struct fcp_cmnd *) &req->qtcb->bottom.io.fcp_cmnd; zfcp_fc_scsi_to_fcp(fcp_cmnd, scsi_cmnd); - real_bytes = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, sbtype, + real_bytes = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, scsi_sglist(scsi_cmnd), - FSF_MAX_SBALS_PER_REQ); + ZFCP_FSF_MAX_SBALS_PER_REQ); if (unlikely(real_bytes < 0)) { - if (req->qdio_req.sbal_number >= FSF_MAX_SBALS_PER_REQ) { + if (req->qdio_req.sbal_number >= ZFCP_FSF_MAX_SBALS_PER_REQ) { dev_err(&adapter->ccw_device->dev, "Oversize data package, unit 0x%016Lx " "on port 0x%016Lx closed\n", @@ -2371,7 +2331,6 @@ out: */ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_unit *unit, u8 tm_flags) { - struct qdio_buffer_element *sbale; struct zfcp_fsf_req *req = NULL; struct fcp_cmnd *fcp_cmnd; struct zfcp_qdio *qdio = unit->port->adapter->qdio; @@ -2385,6 +2344,7 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_unit *unit, u8 tm_flags) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_FCP_CMND, + SBAL_FLAGS0_TYPE_WRITE, qdio->adapter->pool.scsi_req); if (IS_ERR(req)) { @@ -2401,9 +2361,7 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_unit *unit, u8 tm_flags) req->qtcb->bottom.io.service_class = FSF_CLASS_3; req->qtcb->bottom.io.fcp_cmnd_length = FCP_CMND_LEN; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE; - sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; + zfcp_qdio_set_sbale_last(qdio, &req->qdio_req); fcp_cmnd = (struct fcp_cmnd *) &req->qtcb->bottom.io.fcp_cmnd; zfcp_fc_fcp_tm(fcp_cmnd, unit->device, tm_flags); @@ -2432,7 +2390,6 @@ static void zfcp_fsf_control_file_handler(struct zfcp_fsf_req *req) struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter, struct zfcp_fsf_cfdc *fsf_cfdc) { - struct qdio_buffer_element *sbale; struct zfcp_qdio *qdio = adapter->qdio; struct zfcp_fsf_req *req = NULL; struct fsf_qtcb_bottom_support *bottom; @@ -2456,7 +2413,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter, if (zfcp_fsf_req_sbal_get(qdio)) goto out; - req = zfcp_fsf_req_create(qdio, fsf_cfdc->command, NULL); + req = zfcp_fsf_req_create(qdio, fsf_cfdc->command, direction, NULL); if (IS_ERR(req)) { retval = -EPERM; goto out; @@ -2464,16 +2421,13 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter, req->handler = zfcp_fsf_control_file_handler; - sbale = zfcp_qdio_sbale_req(qdio, &req->qdio_req); - sbale[0].flags |= direction; - bottom = &req->qtcb->bottom.support; bottom->operation_subtype = FSF_CFDC_OPERATION_SUBTYPE; bottom->option = fsf_cfdc->option; bytes = zfcp_qdio_sbals_from_sg(qdio, &req->qdio_req, - direction, fsf_cfdc->sg, - FSF_MAX_SBALS_PER_REQ); + fsf_cfdc->sg, + ZFCP_FSF_MAX_SBALS_PER_REQ); if (bytes != ZFCP_CFDC_MAX_SIZE) { zfcp_fsf_req_free(req); goto out; diff --git a/drivers/s390/scsi/zfcp_fsf.h b/drivers/s390/scsi/zfcp_fsf.h index b3de682b64cf..4008bd786793 100644 --- a/drivers/s390/scsi/zfcp_fsf.h +++ b/drivers/s390/scsi/zfcp_fsf.h @@ -3,7 +3,7 @@ * * Interface to the FSF support functions. * - * Copyright IBM Corporation 2002, 2009 + * Copyright IBM Corporation 2002, 2010 */ #ifndef FSF_H @@ -152,7 +152,12 @@ #define FSF_CLASS_3 0x00000003 /* SBAL chaining */ -#define FSF_MAX_SBALS_PER_REQ 36 +#define ZFCP_FSF_MAX_SBALS_PER_REQ 36 + +/* max. number of (data buffer) SBALEs in largest SBAL chain + * request ID + QTCB in SBALE 0 + 1 of first SBAL in chain */ +#define ZFCP_FSF_MAX_SBALES_PER_REQ \ + (ZFCP_FSF_MAX_SBALS_PER_REQ * ZFCP_QDIO_MAX_SBALES_PER_SBAL - 2) /* logging space behind QTCB */ #define FSF_QTCB_LOG_SIZE 1024 diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index aa68515abe21..98d54a9cd563 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -3,7 +3,7 @@ * * Setup and helper functions to access QDIO. * - * Copyright IBM Corporation 2002, 2009 + * Copyright IBM Corporation 2002, 2010 */ #define KMSG_COMPONENT "zfcp" @@ -151,8 +151,7 @@ static void zfcp_qdio_sbal_limit(struct zfcp_qdio *qdio, } static struct qdio_buffer_element * -zfcp_qdio_sbal_chain(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, - unsigned long sbtype) +zfcp_qdio_sbal_chain(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req) { struct qdio_buffer_element *sbale; @@ -180,17 +179,16 @@ zfcp_qdio_sbal_chain(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, /* set storage-block type for new SBAL */ sbale = zfcp_qdio_sbale_curr(qdio, q_req); - sbale->flags |= sbtype; + sbale->flags |= q_req->sbtype; return sbale; } static struct qdio_buffer_element * -zfcp_qdio_sbale_next(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, - unsigned int sbtype) +zfcp_qdio_sbale_next(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req) { - if (q_req->sbale_curr == ZFCP_LAST_SBALE_PER_SBAL) - return zfcp_qdio_sbal_chain(qdio, q_req, sbtype); + if (q_req->sbale_curr == ZFCP_QDIO_LAST_SBALE_PER_SBAL) + return zfcp_qdio_sbal_chain(qdio, q_req); q_req->sbale_curr++; return zfcp_qdio_sbale_curr(qdio, q_req); } @@ -208,15 +206,14 @@ static void zfcp_qdio_undo_sbals(struct zfcp_qdio *qdio, /** * zfcp_qdio_sbals_from_sg - fill SBALs from scatter-gather list - * @fsf_req: request to be processed - * @sbtype: SBALE flags + * @qdio: pointer to struct zfcp_qdio + * @q_req: pointer to struct zfcp_qdio_req * @sg: scatter-gather list * @max_sbals: upper bound for number of SBALs to be used * Returns: number of bytes, or error (negativ) */ int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, - unsigned long sbtype, struct scatterlist *sg, - int max_sbals) + struct scatterlist *sg, int max_sbals) { struct qdio_buffer_element *sbale; int bytes = 0; @@ -226,10 +223,10 @@ int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, /* set storage-block type for this request */ sbale = zfcp_qdio_sbale_req(qdio, q_req); - sbale->flags |= sbtype; + sbale->flags |= q_req->sbtype; for (; sg; sg = sg_next(sg)) { - sbale = zfcp_qdio_sbale_next(qdio, q_req, sbtype); + sbale = zfcp_qdio_sbale_next(qdio, q_req); if (!sbale) { atomic_inc(&qdio->req_q_full); zfcp_qdio_undo_sbals(qdio, q_req); diff --git a/drivers/s390/scsi/zfcp_qdio.h b/drivers/s390/scsi/zfcp_qdio.h index f2b5a363bb84..138fba577b48 100644 --- a/drivers/s390/scsi/zfcp_qdio.h +++ b/drivers/s390/scsi/zfcp_qdio.h @@ -13,6 +13,12 @@ #define ZFCP_QDIO_SBALE_LEN PAGE_SIZE +/* DMQ bug workaround: don't use last SBALE */ +#define ZFCP_QDIO_MAX_SBALES_PER_SBAL (QDIO_MAX_ELEMENTS_PER_BUFFER - 1) + +/* index of last SBALE (with respect to DMQ bug workaround) */ +#define ZFCP_QDIO_LAST_SBALE_PER_SBAL (ZFCP_QDIO_MAX_SBALES_PER_SBAL - 1) + /** * struct zfcp_qdio_queue - qdio queue buffer, zfcp index and free count * @sbal: qdio buffers @@ -51,6 +57,7 @@ struct zfcp_qdio { /** * struct zfcp_qdio_req - qdio queue related values for a request + * @sbtype: sbal type flags for sbale 0 * @sbal_number: number of free sbals * @sbal_first: first sbal for this request * @sbal_last: last sbal for this request @@ -61,6 +68,7 @@ struct zfcp_qdio { * @qdio_inb_usage: usage of inbound queue */ struct zfcp_qdio_req { + u32 sbtype; u8 sbal_number; u8 sbal_first; u8 sbal_last; @@ -108,4 +116,98 @@ zfcp_qdio_sbale_curr(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req) q_req->sbale_curr); } +/** + * zfcp_qdio_req_init - initialize qdio request + * @qdio: request queue where to start putting the request + * @q_req: the qdio request to start + * @req_id: The request id + * @sbtype: type flags to set for all sbals + * @data: First data block + * @len: Length of first data block + * + * This is the start of putting the request into the queue, the last + * step is passing the request to zfcp_qdio_send. The request queue + * lock must be held during the whole process from init to send. + */ +static inline +void zfcp_qdio_req_init(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, + unsigned long req_id, u32 sbtype, void *data, u32 len) +{ + struct qdio_buffer_element *sbale; + + q_req->sbal_first = q_req->sbal_last = qdio->req_q.first; + q_req->sbal_number = 1; + q_req->sbtype = sbtype; + + sbale = zfcp_qdio_sbale_req(qdio, q_req); + sbale->addr = (void *) req_id; + sbale->flags |= SBAL_FLAGS0_COMMAND; + sbale->flags |= sbtype; + + q_req->sbale_curr = 1; + sbale++; + sbale->addr = data; + if (likely(data)) + sbale->length = len; +} + +/** + * zfcp_qdio_fill_next - Fill next sbale, only for single sbal requests + * @qdio: pointer to struct zfcp_qdio + * @q_req: pointer to struct zfcp_queue_req + * + * This is only required for single sbal requests, calling it when + * wrapping around to the next sbal is a bug. + */ +static inline +void zfcp_qdio_fill_next(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, + void *data, u32 len) +{ + struct qdio_buffer_element *sbale; + + BUG_ON(q_req->sbale_curr == ZFCP_QDIO_LAST_SBALE_PER_SBAL); + q_req->sbale_curr++; + sbale = zfcp_qdio_sbale_curr(qdio, q_req); + sbale->addr = data; + sbale->length = len; +} + +/** + * zfcp_qdio_set_sbale_last - set last entry flag in current sbale + * @qdio: pointer to struct zfcp_qdio + * @q_req: pointer to struct zfcp_queue_req + */ +static inline +void zfcp_qdio_set_sbale_last(struct zfcp_qdio *qdio, + struct zfcp_qdio_req *q_req) +{ + struct qdio_buffer_element *sbale; + + sbale = zfcp_qdio_sbale_curr(qdio, q_req); + sbale->flags |= SBAL_FLAGS_LAST_ENTRY; +} + +/** + * zfcp_qdio_sg_one_sbal - check if one sbale is enough for sg data + * @sg: The scatterlist where to check the data size + * + * Returns: 1 when one sbale is enough for the data in the scatterlist, + * 0 if not. + */ +static inline +int zfcp_qdio_sg_one_sbale(struct scatterlist *sg) +{ + return sg_is_last(sg) && sg->length <= ZFCP_QDIO_SBALE_LEN; +} + +/** + * zfcp_qdio_skip_to_last_sbale - skip to last sbale in sbal + * @q_req: The current zfcp_qdio_req + */ +static inline +void zfcp_qdio_skip_to_last_sbale(struct zfcp_qdio_req *q_req) +{ + q_req->sbale_curr = ZFCP_QDIO_LAST_SBALE_PER_SBAL; +} + #endif /* ZFCP_QDIO_H */ diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 066b0507a639..be5d2c60453d 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -677,11 +677,11 @@ struct zfcp_data zfcp_data = { .eh_host_reset_handler = zfcp_scsi_eh_host_reset_handler, .can_queue = 4096, .this_id = -1, - .sg_tablesize = ZFCP_MAX_SBALES_PER_REQ, + .sg_tablesize = ZFCP_FSF_MAX_SBALES_PER_REQ, .cmd_per_lun = 1, .use_clustering = 1, .sdev_attrs = zfcp_sysfs_sdev_attrs, - .max_sectors = (ZFCP_MAX_SBALES_PER_REQ * 8), + .max_sectors = (ZFCP_FSF_MAX_SBALES_PER_REQ * 8), .dma_boundary = ZFCP_QDIO_SBALE_LEN - 1, .shost_attrs = zfcp_sysfs_shost_attrs, }, -- cgit v1.2.2 From 6b9e1520094a8aa68009c265eb694e0be9f5be3f Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 30 Apr 2010 18:09:35 +0200 Subject: [SCSI] zfcp: Move sbal_get function to zfcp_qdio.c Waiting for a free sbal is a operation on the qdio queue. Move the code implementing the wait to zfcp_qdio.c and rename the functions accordingly. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_ext.h | 1 + drivers/s390/scsi/zfcp_fsf.c | 65 +++++++++++-------------------------------- drivers/s390/scsi/zfcp_qdio.c | 40 ++++++++++++++++++++++++++ 3 files changed, 58 insertions(+), 48 deletions(-) diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 172da12a2d02..48a8f93b72f5 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -143,6 +143,7 @@ extern void zfcp_fsf_reqid_check(struct zfcp_qdio *, int); /* zfcp_qdio.c */ extern int zfcp_qdio_setup(struct zfcp_adapter *); extern void zfcp_qdio_destroy(struct zfcp_qdio *); +extern int zfcp_qdio_sbal_get(struct zfcp_qdio *); extern int zfcp_qdio_send(struct zfcp_qdio *, struct zfcp_qdio_req *); extern int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *, struct zfcp_qdio_req *, struct scatterlist *, int); diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index ec1b49a75532..3822f22b8150 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -640,37 +640,6 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req) } } -static int zfcp_fsf_sbal_check(struct zfcp_qdio *qdio) -{ - struct zfcp_qdio_queue *req_q = &qdio->req_q; - - spin_lock_bh(&qdio->req_q_lock); - if (atomic_read(&req_q->count)) - return 1; - spin_unlock_bh(&qdio->req_q_lock); - return 0; -} - -static int zfcp_fsf_req_sbal_get(struct zfcp_qdio *qdio) -{ - struct zfcp_adapter *adapter = qdio->adapter; - long ret; - - spin_unlock_bh(&qdio->req_q_lock); - ret = wait_event_interruptible_timeout(qdio->req_q_wq, - zfcp_fsf_sbal_check(qdio), 5 * HZ); - if (ret > 0) - return 0; - if (!ret) { - atomic_inc(&qdio->req_q_full); - /* assume hanging outbound queue, try queue recovery */ - zfcp_erp_adapter_reopen(adapter, 0, "fsrsg_1", NULL); - } - - spin_lock_bh(&qdio->req_q_lock); - return -EIO; -} - static struct zfcp_fsf_req *zfcp_fsf_alloc(mempool_t *pool) { struct zfcp_fsf_req *req; @@ -798,7 +767,7 @@ int zfcp_fsf_status_read(struct zfcp_qdio *qdio) int retval = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_UNSOLICITED_STATUS, 0, @@ -898,7 +867,7 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, struct zfcp_qdio *qdio = unit->port->adapter->qdio; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_ABORT_FCP_CMND, SBAL_FLAGS0_TYPE_READ, @@ -1068,7 +1037,7 @@ int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port, int ret = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_GENERIC, @@ -1165,7 +1134,7 @@ int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id, int ret = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_ELS, @@ -1208,7 +1177,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) int retval = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA, @@ -1250,7 +1219,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_qdio *qdio, int retval = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out_unlock; req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA, @@ -1302,7 +1271,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) return -EOPNOTSUPP; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA, @@ -1348,7 +1317,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_qdio *qdio, return -EOPNOTSUPP; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out_unlock; req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA, @@ -1462,7 +1431,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) int retval = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID, @@ -1530,7 +1499,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) int retval = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT, @@ -1605,7 +1574,7 @@ int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port) int retval = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID, @@ -1658,7 +1627,7 @@ int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port) int retval = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT, @@ -1750,7 +1719,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) int retval = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PHYSICAL_PORT, @@ -1921,7 +1890,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) int retval = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_LUN, @@ -2005,7 +1974,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) int retval = -EIO; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_LUN, @@ -2340,7 +2309,7 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_unit *unit, u8 tm_flags) return NULL; spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, FSF_QTCB_FCP_CMND, @@ -2410,7 +2379,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter, } spin_lock_bh(&qdio->req_q_lock); - if (zfcp_fsf_req_sbal_get(qdio)) + if (zfcp_qdio_sbal_get(qdio)) goto out; req = zfcp_fsf_req_create(qdio, fsf_cfdc->command, direction, NULL); diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index 98d54a9cd563..28117e130e2c 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -246,6 +246,46 @@ int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req, return bytes; } +static int zfcp_qdio_sbal_check(struct zfcp_qdio *qdio) +{ + struct zfcp_qdio_queue *req_q = &qdio->req_q; + + spin_lock_bh(&qdio->req_q_lock); + if (atomic_read(&req_q->count)) + return 1; + spin_unlock_bh(&qdio->req_q_lock); + return 0; +} + +/** + * zfcp_qdio_sbal_get - get free sbal in request queue, wait if necessary + * @qdio: pointer to struct zfcp_qdio + * + * The req_q_lock must be held by the caller of this function, and + * this function may only be called from process context; it will + * sleep when waiting for a free sbal. + * + * Returns: 0 on success, -EIO if there is no free sbal after waiting. + */ +int zfcp_qdio_sbal_get(struct zfcp_qdio *qdio) +{ + long ret; + + spin_unlock_bh(&qdio->req_q_lock); + ret = wait_event_interruptible_timeout(qdio->req_q_wq, + zfcp_qdio_sbal_check(qdio), 5 * HZ); + if (ret > 0) + return 0; + if (!ret) { + atomic_inc(&qdio->req_q_full); + /* assume hanging outbound queue, try queue recovery */ + zfcp_erp_adapter_reopen(qdio->adapter, 0, "qdsbg_1", NULL); + } + + spin_lock_bh(&qdio->req_q_lock); + return -EIO; +} + /** * zfcp_qdio_send - set PCI flag in first SBALE and send req to QDIO * @qdio: pointer to struct zfcp_qdio -- cgit v1.2.2 From 64deb6efdc5504ce97b5c1c6f281fffbc150bd93 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 30 Apr 2010 18:09:36 +0200 Subject: [SCSI] zfcp: Use status_read_buf_num provided by FCP channel The FCP channel provides the number of status read buffers to issue. Use the provided number instead of the hardcoded number in zfcp. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_aux.c | 3 ++- drivers/s390/scsi/zfcp_def.h | 1 + drivers/s390/scsi/zfcp_erp.c | 2 +- drivers/s390/scsi/zfcp_fsf.c | 1 + drivers/s390/scsi/zfcp_fsf.h | 2 +- 5 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index abf33db647ff..e331df2122f7 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -425,7 +425,8 @@ int zfcp_status_read_refill(struct zfcp_adapter *adapter) { while (atomic_read(&adapter->stat_miss) > 0) if (zfcp_fsf_status_read(adapter->qdio)) { - if (atomic_read(&adapter->stat_miss) >= 16) { + if (atomic_read(&adapter->stat_miss) >= + adapter->stat_read_buf_num) { zfcp_erp_adapter_reopen(adapter, 0, "axsref1", NULL); return 1; diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 0b2ae60a6f9f..9fa1b064893e 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -164,6 +164,7 @@ struct zfcp_adapter { stack abort/command completion races */ atomic_t stat_miss; /* # missing status reads*/ + unsigned int stat_read_buf_num; struct work_struct stat_work; atomic_t status; /* status of this adapter */ struct list_head erp_ready_head; /* error recovery for this diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 0be5e7ea2828..e3dbeda97179 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -714,7 +714,7 @@ static int zfcp_erp_adapter_strategy_open_fsf(struct zfcp_erp_action *act) if (zfcp_erp_adapter_strategy_open_fsf_xport(act) == ZFCP_ERP_FAILED) return ZFCP_ERP_FAILED; - atomic_set(&act->adapter->stat_miss, 16); + atomic_set(&act->adapter->stat_miss, act->adapter->stat_read_buf_num); if (zfcp_status_read_refill(act->adapter)) return ZFCP_ERP_FAILED; diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 3822f22b8150..9f90b03ac97d 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -496,6 +496,7 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req) adapter->hydra_version = bottom->adapter_type; adapter->timer_ticks = bottom->timer_interval; + adapter->stat_read_buf_num = max(bottom->status_read_buf_num, (u16)16); if (fc_host_permanent_port_name(shost) == -1) fc_host_permanent_port_name(shost) = fc_host_port_name(shost); diff --git a/drivers/s390/scsi/zfcp_fsf.h b/drivers/s390/scsi/zfcp_fsf.h index 4008bd786793..519083fd6e89 100644 --- a/drivers/s390/scsi/zfcp_fsf.h +++ b/drivers/s390/scsi/zfcp_fsf.h @@ -366,7 +366,7 @@ struct fsf_qtcb_bottom_config { u32 adapter_type; u8 res0; u8 peer_d_id[3]; - u8 res1[2]; + u16 status_read_buf_num; u16 timer_interval; u8 res2[9]; u8 s_id[3]; -- cgit v1.2.2 From 6e51f085f64a79c7647e88a8a019b7bd84f42255 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 30 Apr 2010 18:09:37 +0200 Subject: [SCSI] zfcp: Zero memory for gpn_ft and adisc requests With debug kernels, the memory allocated with kmem_cache_alloc might be initialized with the poison values 6b and a5. Use kmem_cache_zalloc instead of kmem_cache_alloc to get zeroed memory and not send invalid requests. Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 2a1cbb74b99b..6f8ab43a4856 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -400,7 +400,7 @@ static int zfcp_fc_adisc(struct zfcp_port *port) struct zfcp_adapter *adapter = port->adapter; int ret; - adisc = kmem_cache_alloc(zfcp_data.adisc_cache, GFP_ATOMIC); + adisc = kmem_cache_zalloc(zfcp_data.adisc_cache, GFP_ATOMIC); if (!adisc) return -ENOMEM; @@ -493,7 +493,7 @@ static struct zfcp_fc_gpn_ft *zfcp_alloc_sg_env(int buf_num) if (!gpn_ft) return NULL; - req = kmem_cache_alloc(zfcp_data.gpn_ft_cache, GFP_KERNEL); + req = kmem_cache_zalloc(zfcp_data.gpn_ft_cache, GFP_KERNEL); if (!req) { kfree(gpn_ft); gpn_ft = NULL; -- cgit v1.2.2 From 900e8d6b871a986f5adfa0e71112b8b9face177e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 4 Apr 2010 11:00:31 +0200 Subject: [SCSI] wd33c93: Kill empty wd33c93_release() wd33c93_release() has been empty since ages, and sgiwd93.c no longer calls it since its conversion to a proper platform driver 2 years ago. Also remove the callers in the m68k wd33c93 shims. Signed-off-by: Geert Uytterhoeven Cc: Ralf Baechle Signed-off-by: James Bottomley --- drivers/scsi/a2091.c | 2 -- drivers/scsi/a3000.c | 2 -- drivers/scsi/gvp11.c | 2 -- drivers/scsi/mvme147.c | 2 -- drivers/scsi/wd33c93.c | 6 ------ drivers/scsi/wd33c93.h | 1 - 6 files changed, 15 deletions(-) diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c index d8fe5b76fee0..e89064dc8cb0 100644 --- a/drivers/scsi/a2091.c +++ b/drivers/scsi/a2091.c @@ -193,7 +193,6 @@ static int __init a2091_detect(struct scsi_host_template *tpnt) unregister: scsi_unregister(instance); - wd33c93_release(); release: release_mem_region(address, 256); } @@ -242,7 +241,6 @@ static int a2091_release(struct Scsi_Host *instance) DMA(instance)->CNTR = 0; release_mem_region(ZTWO_PADDR(instance->base), 256); free_irq(IRQ_AMIGA_PORTS, instance); - wd33c93_release(); #endif return 1; } diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c index c35fc55f1c96..291568442aa9 100644 --- a/drivers/scsi/a3000.c +++ b/drivers/scsi/a3000.c @@ -193,7 +193,6 @@ static int __init a3000_detect(struct scsi_host_template *tpnt) return 1; fail_irq: - wd33c93_release(); scsi_unregister(a3000_host); fail_register: release_mem_region(0xDD0000, 256); @@ -237,7 +236,6 @@ static struct scsi_host_template driver_template = { static int a3000_release(struct Scsi_Host *instance) { - wd33c93_release(); DMA(instance)->CNTR = 0; release_mem_region(0xDD0000, 256); free_irq(IRQ_AMIGA_PORTS, a3000_intr); diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c index 48f406850c65..322afcc99e25 100644 --- a/drivers/scsi/gvp11.c +++ b/drivers/scsi/gvp11.c @@ -339,7 +339,6 @@ int __init gvp11_detect(struct scsi_host_template *tpnt) unregister: scsi_unregister(instance); - wd33c93_release(); release: release_mem_region(address, 256); } @@ -392,7 +391,6 @@ int gvp11_release(struct Scsi_Host *instance) DMA(instance)->CNTR = 0; release_mem_region(ZTWO_PADDR(instance->base), 256); free_irq(IRQ_AMIGA_PORTS, instance); - wd33c93_release(); #endif return 1; } diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c index d722235111a8..a423fcc7c11a 100644 --- a/drivers/scsi/mvme147.c +++ b/drivers/scsi/mvme147.c @@ -108,7 +108,6 @@ int mvme147_detect(struct scsi_host_template *tpnt) err_free_irq: free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr); err_unregister: - wd33c93_release(); scsi_unregister(mvme147_host); err_out: return 0; @@ -155,7 +154,6 @@ int mvme147_release(struct Scsi_Host *instance) { #ifdef MODULE /* XXX Make sure DMA is stopped! */ - wd33c93_release(); free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr); free_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr); #endif diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c index 5fda881c2470..b701bf2cc187 100644 --- a/drivers/scsi/wd33c93.c +++ b/drivers/scsi/wd33c93.c @@ -2224,14 +2224,8 @@ wd33c93_proc_info(struct Scsi_Host *instance, char *buf, char **start, off_t off } -void -wd33c93_release(void) -{ -} - EXPORT_SYMBOL(wd33c93_host_reset); EXPORT_SYMBOL(wd33c93_init); -EXPORT_SYMBOL(wd33c93_release); EXPORT_SYMBOL(wd33c93_abort); EXPORT_SYMBOL(wd33c93_queuecommand); EXPORT_SYMBOL(wd33c93_intr); diff --git a/drivers/scsi/wd33c93.h b/drivers/scsi/wd33c93.h index 00123f2383d7..1ed5f3bf388e 100644 --- a/drivers/scsi/wd33c93.h +++ b/drivers/scsi/wd33c93.h @@ -348,6 +348,5 @@ int wd33c93_queuecommand (struct scsi_cmnd *cmd, void wd33c93_intr (struct Scsi_Host *instance); int wd33c93_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int); int wd33c93_host_reset (struct scsi_cmnd *); -void wd33c93_release(void); #endif /* WD33C93_H */ -- cgit v1.2.2 From 09bc85b08cc1c146e9b298015601b01a572a543e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 4 Apr 2010 11:00:32 +0200 Subject: [SCSI] a2091: Reindentation Signed-off-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- drivers/scsi/a2091.c | 299 ++++++++++++++++++++++++++------------------------- drivers/scsi/a2091.h | 42 ++++---- 2 files changed, 171 insertions(+), 170 deletions(-) diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c index e89064dc8cb0..8469c239f9fb 100644 --- a/drivers/scsi/a2091.c +++ b/drivers/scsi/a2091.c @@ -19,185 +19,186 @@ #include "wd33c93.h" #include "a2091.h" -#include +#include -#define DMA(ptr) ((a2091_scsiregs *)((ptr)->base)) -#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) + +#define DMA(ptr) ((a2091_scsiregs *)((ptr)->base)) +#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) static int a2091_release(struct Scsi_Host *instance); -static irqreturn_t a2091_intr (int irq, void *_instance) +static irqreturn_t a2091_intr(int irq, void *_instance) { - unsigned long flags; - unsigned int status; - struct Scsi_Host *instance = (struct Scsi_Host *)_instance; - - status = DMA(instance)->ISTR; - if (!(status & (ISTR_INT_F|ISTR_INT_P)) || !(status & ISTR_INTS)) - return IRQ_NONE; - - spin_lock_irqsave(instance->host_lock, flags); - wd33c93_intr(instance); - spin_unlock_irqrestore(instance->host_lock, flags); - return IRQ_HANDLED; + unsigned long flags; + unsigned int status; + struct Scsi_Host *instance = (struct Scsi_Host *)_instance; + + status = DMA(instance)->ISTR; + if (!(status & (ISTR_INT_F | ISTR_INT_P)) || !(status & ISTR_INTS)) + return IRQ_NONE; + + spin_lock_irqsave(instance->host_lock, flags); + wd33c93_intr(instance); + spin_unlock_irqrestore(instance->host_lock, flags); + return IRQ_HANDLED; } static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { - unsigned short cntr = CNTR_PDMD | CNTR_INTEN; - unsigned long addr = virt_to_bus(cmd->SCp.ptr); - struct Scsi_Host *instance = cmd->device->host; - - /* don't allow DMA if the physical address is bad */ - if (addr & A2091_XFER_MASK) - { - HDATA(instance)->dma_bounce_len = (cmd->SCp.this_residual + 511) - & ~0x1ff; - HDATA(instance)->dma_bounce_buffer = - kmalloc (HDATA(instance)->dma_bounce_len, GFP_KERNEL); - - /* can't allocate memory; use PIO */ - if (!HDATA(instance)->dma_bounce_buffer) { - HDATA(instance)->dma_bounce_len = 0; - return 1; - } - - /* get the physical address of the bounce buffer */ - addr = virt_to_bus(HDATA(instance)->dma_bounce_buffer); + unsigned short cntr = CNTR_PDMD | CNTR_INTEN; + unsigned long addr = virt_to_bus(cmd->SCp.ptr); + struct Scsi_Host *instance = cmd->device->host; - /* the bounce buffer may not be in the first 16M of physmem */ + /* don't allow DMA if the physical address is bad */ if (addr & A2091_XFER_MASK) { - /* we could use chipmem... maybe later */ - kfree (HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; - return 1; - } - - if (!dir_in) { - /* copy to bounce buffer for a write */ - memcpy (HDATA(instance)->dma_bounce_buffer, - cmd->SCp.ptr, cmd->SCp.this_residual); + HDATA(instance)->dma_bounce_len = + (cmd->SCp.this_residual + 511) & ~0x1ff; + HDATA(instance)->dma_bounce_buffer = + kmalloc(HDATA(instance)->dma_bounce_len, GFP_KERNEL); + + /* can't allocate memory; use PIO */ + if (!HDATA(instance)->dma_bounce_buffer) { + HDATA(instance)->dma_bounce_len = 0; + return 1; + } + + /* get the physical address of the bounce buffer */ + addr = virt_to_bus(HDATA(instance)->dma_bounce_buffer); + + /* the bounce buffer may not be in the first 16M of physmem */ + if (addr & A2091_XFER_MASK) { + /* we could use chipmem... maybe later */ + kfree(HDATA(instance)->dma_bounce_buffer); + HDATA(instance)->dma_bounce_buffer = NULL; + HDATA(instance)->dma_bounce_len = 0; + return 1; + } + + if (!dir_in) { + /* copy to bounce buffer for a write */ + memcpy(HDATA(instance)->dma_bounce_buffer, + cmd->SCp.ptr, cmd->SCp.this_residual); + } } - } - /* setup dma direction */ - if (!dir_in) - cntr |= CNTR_DDIR; + /* setup dma direction */ + if (!dir_in) + cntr |= CNTR_DDIR; - /* remember direction */ - HDATA(cmd->device->host)->dma_dir = dir_in; + /* remember direction */ + HDATA(cmd->device->host)->dma_dir = dir_in; - DMA(cmd->device->host)->CNTR = cntr; + DMA(cmd->device->host)->CNTR = cntr; - /* setup DMA *physical* address */ - DMA(cmd->device->host)->ACR = addr; + /* setup DMA *physical* address */ + DMA(cmd->device->host)->ACR = addr; - if (dir_in){ - /* invalidate any cache */ - cache_clear (addr, cmd->SCp.this_residual); - }else{ - /* push any dirty cache */ - cache_push (addr, cmd->SCp.this_residual); - } - /* start DMA */ - DMA(cmd->device->host)->ST_DMA = 1; + if (dir_in) { + /* invalidate any cache */ + cache_clear(addr, cmd->SCp.this_residual); + } else { + /* push any dirty cache */ + cache_push(addr, cmd->SCp.this_residual); + } + /* start DMA */ + DMA(cmd->device->host)->ST_DMA = 1; - /* return success */ - return 0; + /* return success */ + return 0; } static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, - int status) + int status) { - /* disable SCSI interrupts */ - unsigned short cntr = CNTR_PDMD; - - if (!HDATA(instance)->dma_dir) - cntr |= CNTR_DDIR; - - /* disable SCSI interrupts */ - DMA(instance)->CNTR = cntr; - - /* flush if we were reading */ - if (HDATA(instance)->dma_dir) { - DMA(instance)->FLUSH = 1; - while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) - ; - } - - /* clear a possible interrupt */ - DMA(instance)->CINT = 1; - - /* stop DMA */ - DMA(instance)->SP_DMA = 1; - - /* restore the CONTROL bits (minus the direction flag) */ - DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; - - /* copy from a bounce buffer, if necessary */ - if (status && HDATA(instance)->dma_bounce_buffer) { - if( HDATA(instance)->dma_dir ) - memcpy (SCpnt->SCp.ptr, - HDATA(instance)->dma_bounce_buffer, - SCpnt->SCp.this_residual); - kfree (HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; - } + /* disable SCSI interrupts */ + unsigned short cntr = CNTR_PDMD; + + if (!HDATA(instance)->dma_dir) + cntr |= CNTR_DDIR; + + /* disable SCSI interrupts */ + DMA(instance)->CNTR = cntr; + + /* flush if we were reading */ + if (HDATA(instance)->dma_dir) { + DMA(instance)->FLUSH = 1; + while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) + ; + } + + /* clear a possible interrupt */ + DMA(instance)->CINT = 1; + + /* stop DMA */ + DMA(instance)->SP_DMA = 1; + + /* restore the CONTROL bits (minus the direction flag) */ + DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; + + /* copy from a bounce buffer, if necessary */ + if (status && HDATA(instance)->dma_bounce_buffer) { + if (HDATA(instance)->dma_dir) + memcpy(SCpnt->SCp.ptr, + HDATA(instance)->dma_bounce_buffer, + SCpnt->SCp.this_residual); + kfree(HDATA(instance)->dma_bounce_buffer); + HDATA(instance)->dma_bounce_buffer = NULL; + HDATA(instance)->dma_bounce_len = 0; + } } static int __init a2091_detect(struct scsi_host_template *tpnt) { - static unsigned char called = 0; - struct Scsi_Host *instance; - unsigned long address; - struct zorro_dev *z = NULL; - wd33c93_regs regs; - int num_a2091 = 0; - - if (!MACH_IS_AMIGA || called) - return 0; - called = 1; - - tpnt->proc_name = "A2091"; - tpnt->proc_info = &wd33c93_proc_info; - - while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { - if (z->id != ZORRO_PROD_CBM_A590_A2091_1 && - z->id != ZORRO_PROD_CBM_A590_A2091_2) - continue; - address = z->resource.start; - if (!request_mem_region(address, 256, "wd33c93")) - continue; - - instance = scsi_register (tpnt, sizeof (struct WD33C93_hostdata)); - if (instance == NULL) - goto release; - instance->base = ZTWO_VADDR(address); - instance->irq = IRQ_AMIGA_PORTS; - instance->unique_id = z->slotaddr; - DMA(instance)->DAWR = DAWR_A2091; - regs.SASR = &(DMA(instance)->SASR); - regs.SCMD = &(DMA(instance)->SCMD); - HDATA(instance)->no_sync = 0xff; - HDATA(instance)->fast = 0; - HDATA(instance)->dma_mode = CTRL_DMA; - wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10); - if (request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, "A2091 SCSI", - instance)) - goto unregister; - DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; - num_a2091++; - continue; + static unsigned char called = 0; + struct Scsi_Host *instance; + unsigned long address; + struct zorro_dev *z = NULL; + wd33c93_regs regs; + int num_a2091 = 0; + + if (!MACH_IS_AMIGA || called) + return 0; + called = 1; + + tpnt->proc_name = "A2091"; + tpnt->proc_info = &wd33c93_proc_info; + + while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { + if (z->id != ZORRO_PROD_CBM_A590_A2091_1 && + z->id != ZORRO_PROD_CBM_A590_A2091_2) + continue; + address = z->resource.start; + if (!request_mem_region(address, 256, "wd33c93")) + continue; + + instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata)); + if (instance == NULL) + goto release; + instance->base = ZTWO_VADDR(address); + instance->irq = IRQ_AMIGA_PORTS; + instance->unique_id = z->slotaddr; + DMA(instance)->DAWR = DAWR_A2091; + regs.SASR = &(DMA(instance)->SASR); + regs.SCMD = &(DMA(instance)->SCMD); + HDATA(instance)->no_sync = 0xff; + HDATA(instance)->fast = 0; + HDATA(instance)->dma_mode = CTRL_DMA; + wd33c93_init(instance, regs, dma_setup, dma_stop, + WD33C93_FS_8_10); + if (request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, + "A2091 SCSI", instance)) + goto unregister; + DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; + num_a2091++; + continue; unregister: - scsi_unregister(instance); + scsi_unregister(instance); release: - release_mem_region(address, 256); - } + release_mem_region(address, 256); + } - return num_a2091; + return num_a2091; } static int a2091_bus_reset(struct scsi_cmnd *cmd) diff --git a/drivers/scsi/a2091.h b/drivers/scsi/a2091.h index 252528f2672e..1c3daa1fd754 100644 --- a/drivers/scsi/a2091.h +++ b/drivers/scsi/a2091.h @@ -12,38 +12,38 @@ #include #ifndef CMD_PER_LUN -#define CMD_PER_LUN 2 +#define CMD_PER_LUN 2 #endif #ifndef CAN_QUEUE -#define CAN_QUEUE 16 +#define CAN_QUEUE 16 #endif /* * if the transfer address ANDed with this results in a non-zero * result, then we can't use DMA. */ -#define A2091_XFER_MASK (0xff000001) +#define A2091_XFER_MASK (0xff000001) typedef struct { - unsigned char pad1[64]; - volatile unsigned short ISTR; - volatile unsigned short CNTR; - unsigned char pad2[60]; - volatile unsigned int WTC; - volatile unsigned long ACR; - unsigned char pad3[6]; - volatile unsigned short DAWR; - unsigned char pad4; - volatile unsigned char SASR; - unsigned char pad5; - volatile unsigned char SCMD; - unsigned char pad6[76]; - volatile unsigned short ST_DMA; - volatile unsigned short SP_DMA; - volatile unsigned short CINT; - unsigned char pad7[2]; - volatile unsigned short FLUSH; + unsigned char pad1[64]; + volatile unsigned short ISTR; + volatile unsigned short CNTR; + unsigned char pad2[60]; + volatile unsigned int WTC; + volatile unsigned long ACR; + unsigned char pad3[6]; + volatile unsigned short DAWR; + unsigned char pad4; + volatile unsigned char SASR; + unsigned char pad5; + volatile unsigned char SCMD; + unsigned char pad6[76]; + volatile unsigned short ST_DMA; + volatile unsigned short SP_DMA; + volatile unsigned short CINT; + unsigned char pad7[2]; + volatile unsigned short FLUSH; } a2091_scsiregs; #define DAWR_A2091 (3) -- cgit v1.2.2 From bb17b7871bb10e0ecf39e3afbc182cab218d0539 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 4 Apr 2010 11:00:33 +0200 Subject: [SCSI] gvp11: Reindentation Signed-off-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- drivers/scsi/gvp11.c | 562 ++++++++++++++++++++++++++------------------------- drivers/scsi/gvp11.h | 36 ++-- 2 files changed, 301 insertions(+), 297 deletions(-) diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c index 322afcc99e25..bd5d90328ee0 100644 --- a/drivers/scsi/gvp11.c +++ b/drivers/scsi/gvp11.c @@ -19,331 +19,335 @@ #include "wd33c93.h" #include "gvp11.h" -#include +#include -#define DMA(ptr) ((gvp11_scsiregs *)((ptr)->base)) -#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) -static irqreturn_t gvp11_intr (int irq, void *_instance) +#define DMA(ptr) ((gvp11_scsiregs *)((ptr)->base)) +#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) + +static irqreturn_t gvp11_intr(int irq, void *_instance) { - unsigned long flags; - unsigned int status; - struct Scsi_Host *instance = (struct Scsi_Host *)_instance; - - status = DMA(instance)->CNTR; - if (!(status & GVP11_DMAC_INT_PENDING)) - return IRQ_NONE; - - spin_lock_irqsave(instance->host_lock, flags); - wd33c93_intr(instance); - spin_unlock_irqrestore(instance->host_lock, flags); - return IRQ_HANDLED; + unsigned long flags; + unsigned int status; + struct Scsi_Host *instance = (struct Scsi_Host *)_instance; + + status = DMA(instance)->CNTR; + if (!(status & GVP11_DMAC_INT_PENDING)) + return IRQ_NONE; + + spin_lock_irqsave(instance->host_lock, flags); + wd33c93_intr(instance); + spin_unlock_irqrestore(instance->host_lock, flags); + return IRQ_HANDLED; } static int gvp11_xfer_mask = 0; -void gvp11_setup (char *str, int *ints) +void gvp11_setup(char *str, int *ints) { - gvp11_xfer_mask = ints[1]; + gvp11_xfer_mask = ints[1]; } static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { - unsigned short cntr = GVP11_DMAC_INT_ENABLE; - unsigned long addr = virt_to_bus(cmd->SCp.ptr); - int bank_mask; - static int scsi_alloc_out_of_range = 0; - - /* use bounce buffer if the physical address is bad */ - if (addr & HDATA(cmd->device->host)->dma_xfer_mask) - { - HDATA(cmd->device->host)->dma_bounce_len = (cmd->SCp.this_residual + 511) - & ~0x1ff; - - if( !scsi_alloc_out_of_range ) { - HDATA(cmd->device->host)->dma_bounce_buffer = - kmalloc (HDATA(cmd->device->host)->dma_bounce_len, GFP_KERNEL); - HDATA(cmd->device->host)->dma_buffer_pool = BUF_SCSI_ALLOCED; - } + unsigned short cntr = GVP11_DMAC_INT_ENABLE; + unsigned long addr = virt_to_bus(cmd->SCp.ptr); + int bank_mask; + static int scsi_alloc_out_of_range = 0; - if (scsi_alloc_out_of_range || - !HDATA(cmd->device->host)->dma_bounce_buffer) { - HDATA(cmd->device->host)->dma_bounce_buffer = - amiga_chip_alloc(HDATA(cmd->device->host)->dma_bounce_len, - "GVP II SCSI Bounce Buffer"); + /* use bounce buffer if the physical address is bad */ + if (addr & HDATA(cmd->device->host)->dma_xfer_mask) { + HDATA(cmd->device->host)->dma_bounce_len = + (cmd->SCp.this_residual + 511) & ~0x1ff; + + if (!scsi_alloc_out_of_range) { + HDATA(cmd->device->host)->dma_bounce_buffer = + kmalloc(HDATA(cmd->device->host)->dma_bounce_len, + GFP_KERNEL); + HDATA(cmd->device->host)->dma_buffer_pool = + BUF_SCSI_ALLOCED; + } - if(!HDATA(cmd->device->host)->dma_bounce_buffer) - { - HDATA(cmd->device->host)->dma_bounce_len = 0; - return 1; - } + if (scsi_alloc_out_of_range || + !HDATA(cmd->device->host)->dma_bounce_buffer) { + HDATA(cmd->device->host)->dma_bounce_buffer = + amiga_chip_alloc(HDATA(cmd->device->host)->dma_bounce_len, + "GVP II SCSI Bounce Buffer"); - HDATA(cmd->device->host)->dma_buffer_pool = BUF_CHIP_ALLOCED; - } + if (!HDATA(cmd->device->host)->dma_bounce_buffer) { + HDATA(cmd->device->host)->dma_bounce_len = 0; + return 1; + } - /* check if the address of the bounce buffer is OK */ - addr = virt_to_bus(HDATA(cmd->device->host)->dma_bounce_buffer); + HDATA(cmd->device->host)->dma_buffer_pool = + BUF_CHIP_ALLOCED; + } - if (addr & HDATA(cmd->device->host)->dma_xfer_mask) { - /* fall back to Chip RAM if address out of range */ - if( HDATA(cmd->device->host)->dma_buffer_pool == BUF_SCSI_ALLOCED) { - kfree (HDATA(cmd->device->host)->dma_bounce_buffer); - scsi_alloc_out_of_range = 1; - } else { - amiga_chip_free (HDATA(cmd->device->host)->dma_bounce_buffer); - } - - HDATA(cmd->device->host)->dma_bounce_buffer = - amiga_chip_alloc(HDATA(cmd->device->host)->dma_bounce_len, - "GVP II SCSI Bounce Buffer"); - - if(!HDATA(cmd->device->host)->dma_bounce_buffer) - { - HDATA(cmd->device->host)->dma_bounce_len = 0; - return 1; - } - - addr = virt_to_bus(HDATA(cmd->device->host)->dma_bounce_buffer); - HDATA(cmd->device->host)->dma_buffer_pool = BUF_CHIP_ALLOCED; - } - - if (!dir_in) { - /* copy to bounce buffer for a write */ - memcpy (HDATA(cmd->device->host)->dma_bounce_buffer, - cmd->SCp.ptr, cmd->SCp.this_residual); + /* check if the address of the bounce buffer is OK */ + addr = virt_to_bus(HDATA(cmd->device->host)->dma_bounce_buffer); + + if (addr & HDATA(cmd->device->host)->dma_xfer_mask) { + /* fall back to Chip RAM if address out of range */ + if (HDATA(cmd->device->host)->dma_buffer_pool == + BUF_SCSI_ALLOCED) { + kfree(HDATA(cmd->device->host)->dma_bounce_buffer); + scsi_alloc_out_of_range = 1; + } else { + amiga_chip_free(HDATA(cmd->device->host)->dma_bounce_buffer); + } + + HDATA(cmd->device->host)->dma_bounce_buffer = + amiga_chip_alloc(HDATA(cmd->device->host)->dma_bounce_len, + "GVP II SCSI Bounce Buffer"); + + if (!HDATA(cmd->device->host)->dma_bounce_buffer) { + HDATA(cmd->device->host)->dma_bounce_len = 0; + return 1; + } + + addr = virt_to_bus(HDATA(cmd->device->host)->dma_bounce_buffer); + HDATA(cmd->device->host)->dma_buffer_pool = + BUF_CHIP_ALLOCED; + } + + if (!dir_in) { + /* copy to bounce buffer for a write */ + memcpy(HDATA(cmd->device->host)->dma_bounce_buffer, + cmd->SCp.ptr, cmd->SCp.this_residual); + } } - } - /* setup dma direction */ - if (!dir_in) - cntr |= GVP11_DMAC_DIR_WRITE; + /* setup dma direction */ + if (!dir_in) + cntr |= GVP11_DMAC_DIR_WRITE; - HDATA(cmd->device->host)->dma_dir = dir_in; - DMA(cmd->device->host)->CNTR = cntr; + HDATA(cmd->device->host)->dma_dir = dir_in; + DMA(cmd->device->host)->CNTR = cntr; - /* setup DMA *physical* address */ - DMA(cmd->device->host)->ACR = addr; + /* setup DMA *physical* address */ + DMA(cmd->device->host)->ACR = addr; - if (dir_in) - /* invalidate any cache */ - cache_clear (addr, cmd->SCp.this_residual); - else - /* push any dirty cache */ - cache_push (addr, cmd->SCp.this_residual); + if (dir_in) { + /* invalidate any cache */ + cache_clear(addr, cmd->SCp.this_residual); + } else { + /* push any dirty cache */ + cache_push(addr, cmd->SCp.this_residual); + } - if ((bank_mask = (~HDATA(cmd->device->host)->dma_xfer_mask >> 18) & 0x01c0)) - DMA(cmd->device->host)->BANK = bank_mask & (addr >> 18); + if ((bank_mask = (~HDATA(cmd->device->host)->dma_xfer_mask >> 18) & 0x01c0)) + DMA(cmd->device->host)->BANK = bank_mask & (addr >> 18); - /* start DMA */ - DMA(cmd->device->host)->ST_DMA = 1; + /* start DMA */ + DMA(cmd->device->host)->ST_DMA = 1; - /* return success */ - return 0; + /* return success */ + return 0; } static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, int status) { - /* stop DMA */ - DMA(instance)->SP_DMA = 1; - /* remove write bit from CONTROL bits */ - DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE; - - /* copy from a bounce buffer, if necessary */ - if (status && HDATA(instance)->dma_bounce_buffer) { - if (HDATA(instance)->dma_dir && SCpnt) - memcpy (SCpnt->SCp.ptr, - HDATA(instance)->dma_bounce_buffer, - SCpnt->SCp.this_residual); - - if (HDATA(instance)->dma_buffer_pool == BUF_SCSI_ALLOCED) - kfree (HDATA(instance)->dma_bounce_buffer); - else - amiga_chip_free(HDATA(instance)->dma_bounce_buffer); - - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; - } + /* stop DMA */ + DMA(instance)->SP_DMA = 1; + /* remove write bit from CONTROL bits */ + DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE; + + /* copy from a bounce buffer, if necessary */ + if (status && HDATA(instance)->dma_bounce_buffer) { + if (HDATA(instance)->dma_dir && SCpnt) + memcpy(SCpnt->SCp.ptr, + HDATA(instance)->dma_bounce_buffer, + SCpnt->SCp.this_residual); + + if (HDATA(instance)->dma_buffer_pool == BUF_SCSI_ALLOCED) + kfree(HDATA(instance)->dma_bounce_buffer); + else + amiga_chip_free(HDATA(instance)->dma_bounce_buffer); + + HDATA(instance)->dma_bounce_buffer = NULL; + HDATA(instance)->dma_bounce_len = 0; + } } #define CHECK_WD33C93 int __init gvp11_detect(struct scsi_host_template *tpnt) { - static unsigned char called = 0; - struct Scsi_Host *instance; - unsigned long address; - unsigned int epc; - struct zorro_dev *z = NULL; - unsigned int default_dma_xfer_mask; - wd33c93_regs regs; - int num_gvp11 = 0; + static unsigned char called = 0; + struct Scsi_Host *instance; + unsigned long address; + unsigned int epc; + struct zorro_dev *z = NULL; + unsigned int default_dma_xfer_mask; + wd33c93_regs regs; + int num_gvp11 = 0; #ifdef CHECK_WD33C93 - volatile unsigned char *sasr_3393, *scmd_3393; - unsigned char save_sasr; - unsigned char q, qq; + volatile unsigned char *sasr_3393, *scmd_3393; + unsigned char save_sasr; + unsigned char q, qq; #endif - if (!MACH_IS_AMIGA || called) - return 0; - called = 1; - - tpnt->proc_name = "GVP11"; - tpnt->proc_info = &wd33c93_proc_info; - - while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { - /* - * This should (hopefully) be the correct way to identify - * all the different GVP SCSI controllers (except for the - * SERIES I though). - */ - - if (z->id == ZORRO_PROD_GVP_COMBO_030_R3_SCSI || - z->id == ZORRO_PROD_GVP_SERIES_II) - default_dma_xfer_mask = ~0x00ffffff; - else if (z->id == ZORRO_PROD_GVP_GFORCE_030_SCSI || - z->id == ZORRO_PROD_GVP_A530_SCSI || - z->id == ZORRO_PROD_GVP_COMBO_030_R4_SCSI) - default_dma_xfer_mask = ~0x01ffffff; - else if (z->id == ZORRO_PROD_GVP_A1291 || - z->id == ZORRO_PROD_GVP_GFORCE_040_SCSI_1) - default_dma_xfer_mask = ~0x07ffffff; - else - continue; - - /* - * Rumors state that some GVP ram boards use the same product - * code as the SCSI controllers. Therefore if the board-size - * is not 64KB we asume it is a ram board and bail out. - */ - if (z->resource.end-z->resource.start != 0xffff) - continue; - - address = z->resource.start; - if (!request_mem_region(address, 256, "wd33c93")) - continue; + if (!MACH_IS_AMIGA || called) + return 0; + called = 1; + + tpnt->proc_name = "GVP11"; + tpnt->proc_info = &wd33c93_proc_info; + + while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { + /* + * This should (hopefully) be the correct way to identify + * all the different GVP SCSI controllers (except for the + * SERIES I though). + */ + + if (z->id == ZORRO_PROD_GVP_COMBO_030_R3_SCSI || + z->id == ZORRO_PROD_GVP_SERIES_II) + default_dma_xfer_mask = ~0x00ffffff; + else if (z->id == ZORRO_PROD_GVP_GFORCE_030_SCSI || + z->id == ZORRO_PROD_GVP_A530_SCSI || + z->id == ZORRO_PROD_GVP_COMBO_030_R4_SCSI) + default_dma_xfer_mask = ~0x01ffffff; + else if (z->id == ZORRO_PROD_GVP_A1291 || + z->id == ZORRO_PROD_GVP_GFORCE_040_SCSI_1) + default_dma_xfer_mask = ~0x07ffffff; + else + continue; + + /* + * Rumors state that some GVP ram boards use the same product + * code as the SCSI controllers. Therefore if the board-size + * is not 64KB we asume it is a ram board and bail out. + */ + if (z->resource.end - z->resource.start != 0xffff) + continue; + + address = z->resource.start; + if (!request_mem_region(address, 256, "wd33c93")) + continue; #ifdef CHECK_WD33C93 - /* - * These darn GVP boards are a problem - it can be tough to tell - * whether or not they include a SCSI controller. This is the - * ultimate Yet-Another-GVP-Detection-Hack in that it actually - * probes for a WD33c93 chip: If we find one, it's extremely - * likely that this card supports SCSI, regardless of Product_ - * Code, Board_Size, etc. - */ - - /* Get pointers to the presumed register locations and save contents */ - - sasr_3393 = &(((gvp11_scsiregs *)(ZTWO_VADDR(address)))->SASR); - scmd_3393 = &(((gvp11_scsiregs *)(ZTWO_VADDR(address)))->SCMD); - save_sasr = *sasr_3393; - - /* First test the AuxStatus Reg */ - - q = *sasr_3393; /* read it */ - if (q & 0x08) /* bit 3 should always be clear */ - goto release; - *sasr_3393 = WD_AUXILIARY_STATUS; /* setup indirect address */ - if (*sasr_3393 == WD_AUXILIARY_STATUS) { /* shouldn't retain the write */ - *sasr_3393 = save_sasr; /* Oops - restore this byte */ - goto release; + /* + * These darn GVP boards are a problem - it can be tough to tell + * whether or not they include a SCSI controller. This is the + * ultimate Yet-Another-GVP-Detection-Hack in that it actually + * probes for a WD33c93 chip: If we find one, it's extremely + * likely that this card supports SCSI, regardless of Product_ + * Code, Board_Size, etc. + */ + + /* Get pointers to the presumed register locations and save contents */ + + sasr_3393 = &(((gvp11_scsiregs *)(ZTWO_VADDR(address)))->SASR); + scmd_3393 = &(((gvp11_scsiregs *)(ZTWO_VADDR(address)))->SCMD); + save_sasr = *sasr_3393; + + /* First test the AuxStatus Reg */ + + q = *sasr_3393; /* read it */ + if (q & 0x08) /* bit 3 should always be clear */ + goto release; + *sasr_3393 = WD_AUXILIARY_STATUS; /* setup indirect address */ + if (*sasr_3393 == WD_AUXILIARY_STATUS) { /* shouldn't retain the write */ + *sasr_3393 = save_sasr; /* Oops - restore this byte */ + goto release; } - if (*sasr_3393 != q) { /* should still read the same */ - *sasr_3393 = save_sasr; /* Oops - restore this byte */ - goto release; + if (*sasr_3393 != q) { /* should still read the same */ + *sasr_3393 = save_sasr; /* Oops - restore this byte */ + goto release; } - if (*scmd_3393 != q) /* and so should the image at 0x1f */ - goto release; - - - /* Ok, we probably have a wd33c93, but let's check a few other places - * for good measure. Make sure that this works for both 'A and 'B - * chip versions. - */ - - *sasr_3393 = WD_SCSI_STATUS; - q = *scmd_3393; - *sasr_3393 = WD_SCSI_STATUS; - *scmd_3393 = ~q; - *sasr_3393 = WD_SCSI_STATUS; - qq = *scmd_3393; - *sasr_3393 = WD_SCSI_STATUS; - *scmd_3393 = q; - if (qq != q) /* should be read only */ - goto release; - *sasr_3393 = 0x1e; /* this register is unimplemented */ - q = *scmd_3393; - *sasr_3393 = 0x1e; - *scmd_3393 = ~q; - *sasr_3393 = 0x1e; - qq = *scmd_3393; - *sasr_3393 = 0x1e; - *scmd_3393 = q; - if (qq != q || qq != 0xff) /* should be read only, all 1's */ - goto release; - *sasr_3393 = WD_TIMEOUT_PERIOD; - q = *scmd_3393; - *sasr_3393 = WD_TIMEOUT_PERIOD; - *scmd_3393 = ~q; - *sasr_3393 = WD_TIMEOUT_PERIOD; - qq = *scmd_3393; - *sasr_3393 = WD_TIMEOUT_PERIOD; - *scmd_3393 = q; - if (qq != (~q & 0xff)) /* should be read/write */ - goto release; + if (*scmd_3393 != q) /* and so should the image at 0x1f */ + goto release; + + /* + * Ok, we probably have a wd33c93, but let's check a few other places + * for good measure. Make sure that this works for both 'A and 'B + * chip versions. + */ + + *sasr_3393 = WD_SCSI_STATUS; + q = *scmd_3393; + *sasr_3393 = WD_SCSI_STATUS; + *scmd_3393 = ~q; + *sasr_3393 = WD_SCSI_STATUS; + qq = *scmd_3393; + *sasr_3393 = WD_SCSI_STATUS; + *scmd_3393 = q; + if (qq != q) /* should be read only */ + goto release; + *sasr_3393 = 0x1e; /* this register is unimplemented */ + q = *scmd_3393; + *sasr_3393 = 0x1e; + *scmd_3393 = ~q; + *sasr_3393 = 0x1e; + qq = *scmd_3393; + *sasr_3393 = 0x1e; + *scmd_3393 = q; + if (qq != q || qq != 0xff) /* should be read only, all 1's */ + goto release; + *sasr_3393 = WD_TIMEOUT_PERIOD; + q = *scmd_3393; + *sasr_3393 = WD_TIMEOUT_PERIOD; + *scmd_3393 = ~q; + *sasr_3393 = WD_TIMEOUT_PERIOD; + qq = *scmd_3393; + *sasr_3393 = WD_TIMEOUT_PERIOD; + *scmd_3393 = q; + if (qq != (~q & 0xff)) /* should be read/write */ + goto release; #endif - instance = scsi_register (tpnt, sizeof (struct WD33C93_hostdata)); - if(instance == NULL) - goto release; - instance->base = ZTWO_VADDR(address); - instance->irq = IRQ_AMIGA_PORTS; - instance->unique_id = z->slotaddr; - - if (gvp11_xfer_mask) - HDATA(instance)->dma_xfer_mask = gvp11_xfer_mask; - else - HDATA(instance)->dma_xfer_mask = default_dma_xfer_mask; - - - DMA(instance)->secret2 = 1; - DMA(instance)->secret1 = 0; - DMA(instance)->secret3 = 15; - while (DMA(instance)->CNTR & GVP11_DMAC_BUSY) ; - DMA(instance)->CNTR = 0; - - DMA(instance)->BANK = 0; - - epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000); - - /* - * Check for 14MHz SCSI clock - */ - regs.SASR = &(DMA(instance)->SASR); - regs.SCMD = &(DMA(instance)->SCMD); - HDATA(instance)->no_sync = 0xff; - HDATA(instance)->fast = 0; - HDATA(instance)->dma_mode = CTRL_DMA; - wd33c93_init(instance, regs, dma_setup, dma_stop, - (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10 - : WD33C93_FS_12_15); - - if (request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED, "GVP11 SCSI", - instance)) - goto unregister; - DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE; - num_gvp11++; - continue; + instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata)); + if (instance == NULL) + goto release; + instance->base = ZTWO_VADDR(address); + instance->irq = IRQ_AMIGA_PORTS; + instance->unique_id = z->slotaddr; + + if (gvp11_xfer_mask) + HDATA(instance)->dma_xfer_mask = gvp11_xfer_mask; + else + HDATA(instance)->dma_xfer_mask = default_dma_xfer_mask; + + DMA(instance)->secret2 = 1; + DMA(instance)->secret1 = 0; + DMA(instance)->secret3 = 15; + while (DMA(instance)->CNTR & GVP11_DMAC_BUSY) + ; + DMA(instance)->CNTR = 0; + + DMA(instance)->BANK = 0; + + epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000); + + /* + * Check for 14MHz SCSI clock + */ + regs.SASR = &(DMA(instance)->SASR); + regs.SCMD = &(DMA(instance)->SCMD); + HDATA(instance)->no_sync = 0xff; + HDATA(instance)->fast = 0; + HDATA(instance)->dma_mode = CTRL_DMA; + wd33c93_init(instance, regs, dma_setup, dma_stop, + (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10 + : WD33C93_FS_12_15); + + if (request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED, + "GVP11 SCSI", instance)) + goto unregister; + DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE; + num_gvp11++; + continue; unregister: - scsi_unregister(instance); + scsi_unregister(instance); release: - release_mem_region(address, 256); - } + release_mem_region(address, 256); + } - return num_gvp11; + return num_gvp11; } static int gvp11_bus_reset(struct scsi_cmnd *cmd) @@ -388,11 +392,11 @@ static struct scsi_host_template driver_template = { int gvp11_release(struct Scsi_Host *instance) { #ifdef MODULE - DMA(instance)->CNTR = 0; - release_mem_region(ZTWO_PADDR(instance->base), 256); - free_irq(IRQ_AMIGA_PORTS, instance); + DMA(instance)->CNTR = 0; + release_mem_region(ZTWO_PADDR(instance->base), 256); + free_irq(IRQ_AMIGA_PORTS, instance); #endif - return 1; + return 1; } MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/gvp11.h b/drivers/scsi/gvp11.h index bf22859a5035..e2efdf9601ef 100644 --- a/drivers/scsi/gvp11.h +++ b/drivers/scsi/gvp11.h @@ -15,11 +15,11 @@ int gvp11_detect(struct scsi_host_template *); int gvp11_release(struct Scsi_Host *); #ifndef CMD_PER_LUN -#define CMD_PER_LUN 2 +#define CMD_PER_LUN 2 #endif #ifndef CAN_QUEUE -#define CAN_QUEUE 16 +#define CAN_QUEUE 16 #endif #ifndef HOSTS_C @@ -28,24 +28,24 @@ int gvp11_release(struct Scsi_Host *); * if the transfer address ANDed with this results in a non-zero * result, then we can't use DMA. */ -#define GVP11_XFER_MASK (0xff000001) +#define GVP11_XFER_MASK (0xff000001) typedef struct { - unsigned char pad1[64]; - volatile unsigned short CNTR; - unsigned char pad2[31]; - volatile unsigned char SASR; - unsigned char pad3; - volatile unsigned char SCMD; - unsigned char pad4[4]; - volatile unsigned short BANK; - unsigned char pad5[6]; - volatile unsigned long ACR; - volatile unsigned short secret1; /* store 0 here */ - volatile unsigned short ST_DMA; - volatile unsigned short SP_DMA; - volatile unsigned short secret2; /* store 1 here */ - volatile unsigned short secret3; /* store 15 here */ + unsigned char pad1[64]; + volatile unsigned short CNTR; + unsigned char pad2[31]; + volatile unsigned char SASR; + unsigned char pad3; + volatile unsigned char SCMD; + unsigned char pad4[4]; + volatile unsigned short BANK; + unsigned char pad5[6]; + volatile unsigned long ACR; + volatile unsigned short secret1; /* store 0 here */ + volatile unsigned short ST_DMA; + volatile unsigned short SP_DMA; + volatile unsigned short secret2; /* store 1 here */ + volatile unsigned short secret3; /* store 15 here */ } gvp11_scsiregs; /* bits in CNTR */ -- cgit v1.2.2 From be4540db062975ce557daf0119153fb17ecd6693 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 4 Apr 2010 11:00:34 +0200 Subject: [SCSI] mvme147: Reindentation Signed-off-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- drivers/scsi/mvme147.c | 166 +++++++++++++++++++++++++------------------------ drivers/scsi/mvme147.h | 4 +- 2 files changed, 87 insertions(+), 83 deletions(-) diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c index a423fcc7c11a..b236d72850d1 100644 --- a/drivers/scsi/mvme147.c +++ b/drivers/scsi/mvme147.c @@ -13,111 +13,115 @@ #include "wd33c93.h" #include "mvme147.h" -#include +#include -#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) + +#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) static struct Scsi_Host *mvme147_host = NULL; -static irqreturn_t mvme147_intr (int irq, void *dummy) +static irqreturn_t mvme147_intr(int irq, void *dummy) { - if (irq == MVME147_IRQ_SCSI_PORT) - wd33c93_intr (mvme147_host); - else - m147_pcc->dma_intr = 0x89; /* Ack and enable ints */ - return IRQ_HANDLED; + if (irq == MVME147_IRQ_SCSI_PORT) + wd33c93_intr(mvme147_host); + else + m147_pcc->dma_intr = 0x89; /* Ack and enable ints */ + return IRQ_HANDLED; } static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { - unsigned char flags = 0x01; - unsigned long addr = virt_to_bus(cmd->SCp.ptr); - - /* setup dma direction */ - if (!dir_in) - flags |= 0x04; - - /* remember direction */ - HDATA(mvme147_host)->dma_dir = dir_in; - - if (dir_in) - /* invalidate any cache */ - cache_clear (addr, cmd->SCp.this_residual); - else - /* push any dirty cache */ - cache_push (addr, cmd->SCp.this_residual); - - /* start DMA */ - m147_pcc->dma_bcr = cmd->SCp.this_residual | (1<<24); - m147_pcc->dma_dadr = addr; - m147_pcc->dma_cntrl = flags; - - /* return success */ - return 0; + unsigned char flags = 0x01; + unsigned long addr = virt_to_bus(cmd->SCp.ptr); + + /* setup dma direction */ + if (!dir_in) + flags |= 0x04; + + /* remember direction */ + HDATA(mvme147_host)->dma_dir = dir_in; + + if (dir_in) { + /* invalidate any cache */ + cache_clear(addr, cmd->SCp.this_residual); + } else { + /* push any dirty cache */ + cache_push(addr, cmd->SCp.this_residual); + } + + /* start DMA */ + m147_pcc->dma_bcr = cmd->SCp.this_residual | (1 << 24); + m147_pcc->dma_dadr = addr; + m147_pcc->dma_cntrl = flags; + + /* return success */ + return 0; } static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, - int status) + int status) { - m147_pcc->dma_cntrl = 0; + m147_pcc->dma_cntrl = 0; } int mvme147_detect(struct scsi_host_template *tpnt) { - static unsigned char called = 0; - wd33c93_regs regs; - - if (!MACH_IS_MVME147 || called) - return 0; - called++; - - tpnt->proc_name = "MVME147"; - tpnt->proc_info = &wd33c93_proc_info; - - mvme147_host = scsi_register (tpnt, sizeof(struct WD33C93_hostdata)); - if (!mvme147_host) - goto err_out; - - mvme147_host->base = 0xfffe4000; - mvme147_host->irq = MVME147_IRQ_SCSI_PORT; - regs.SASR = (volatile unsigned char *)0xfffe4000; - regs.SCMD = (volatile unsigned char *)0xfffe4001; - HDATA(mvme147_host)->no_sync = 0xff; - HDATA(mvme147_host)->fast = 0; - HDATA(mvme147_host)->dma_mode = CTRL_DMA; - wd33c93_init(mvme147_host, regs, dma_setup, dma_stop, WD33C93_FS_8_10); - - if (request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0, "MVME147 SCSI PORT", mvme147_intr)) - goto err_unregister; - if (request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0, "MVME147 SCSI DMA", mvme147_intr)) - goto err_free_irq; + static unsigned char called = 0; + wd33c93_regs regs; + + if (!MACH_IS_MVME147 || called) + return 0; + called++; + + tpnt->proc_name = "MVME147"; + tpnt->proc_info = &wd33c93_proc_info; + + mvme147_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata)); + if (!mvme147_host) + goto err_out; + + mvme147_host->base = 0xfffe4000; + mvme147_host->irq = MVME147_IRQ_SCSI_PORT; + regs.SASR = (volatile unsigned char *)0xfffe4000; + regs.SCMD = (volatile unsigned char *)0xfffe4001; + HDATA(mvme147_host)->no_sync = 0xff; + HDATA(mvme147_host)->fast = 0; + HDATA(mvme147_host)->dma_mode = CTRL_DMA; + wd33c93_init(mvme147_host, regs, dma_setup, dma_stop, WD33C93_FS_8_10); + + if (request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0, + "MVME147 SCSI PORT", mvme147_intr)) + goto err_unregister; + if (request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0, + "MVME147 SCSI DMA", mvme147_intr)) + goto err_free_irq; #if 0 /* Disabled; causes problems booting */ - m147_pcc->scsi_interrupt = 0x10; /* Assert SCSI bus reset */ - udelay(100); - m147_pcc->scsi_interrupt = 0x00; /* Negate SCSI bus reset */ - udelay(2000); - m147_pcc->scsi_interrupt = 0x40; /* Clear bus reset interrupt */ + m147_pcc->scsi_interrupt = 0x10; /* Assert SCSI bus reset */ + udelay(100); + m147_pcc->scsi_interrupt = 0x00; /* Negate SCSI bus reset */ + udelay(2000); + m147_pcc->scsi_interrupt = 0x40; /* Clear bus reset interrupt */ #endif - m147_pcc->scsi_interrupt = 0x09; /* Enable interrupt */ + m147_pcc->scsi_interrupt = 0x09; /* Enable interrupt */ - m147_pcc->dma_cntrl = 0x00; /* ensure DMA is stopped */ - m147_pcc->dma_intr = 0x89; /* Ack and enable ints */ + m147_pcc->dma_cntrl = 0x00; /* ensure DMA is stopped */ + m147_pcc->dma_intr = 0x89; /* Ack and enable ints */ - return 1; + return 1; - err_free_irq: - free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr); - err_unregister: - scsi_unregister(mvme147_host); - err_out: - return 0; +err_free_irq: + free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr); +err_unregister: + scsi_unregister(mvme147_host); +err_out: + return 0; } static int mvme147_bus_reset(struct scsi_cmnd *cmd) { /* FIXME perform bus-specific reset */ - /* FIXME 2: kill this function, and let midlayer fallback to + /* FIXME 2: kill this function, and let midlayer fallback to the same result, calling wd33c93_host_reset() */ spin_lock_irq(cmd->device->host->host_lock); @@ -153,9 +157,9 @@ static struct scsi_host_template driver_template = { int mvme147_release(struct Scsi_Host *instance) { #ifdef MODULE - /* XXX Make sure DMA is stopped! */ - free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr); - free_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr); + /* XXX Make sure DMA is stopped! */ + free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr); + free_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr); #endif - return 1; + return 1; } diff --git a/drivers/scsi/mvme147.h b/drivers/scsi/mvme147.h index 32aee85434d8..bfd4566ef050 100644 --- a/drivers/scsi/mvme147.h +++ b/drivers/scsi/mvme147.h @@ -14,11 +14,11 @@ int mvme147_detect(struct scsi_host_template *); int mvme147_release(struct Scsi_Host *); #ifndef CMD_PER_LUN -#define CMD_PER_LUN 2 +#define CMD_PER_LUN 2 #endif #ifndef CAN_QUEUE -#define CAN_QUEUE 16 +#define CAN_QUEUE 16 #endif #endif /* MVME147_H */ -- cgit v1.2.2 From 21351013402ab4556d1ef62aed6cbe8dfb809f77 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 4 Apr 2010 11:00:35 +0200 Subject: [SCSI] a3000: Reindentation Signed-off-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- drivers/scsi/a3000.c | 280 +++++++++++++++++++++++++-------------------------- drivers/scsi/a3000.h | 46 ++++----- 2 files changed, 163 insertions(+), 163 deletions(-) diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c index 291568442aa9..31434f7c3685 100644 --- a/drivers/scsi/a3000.c +++ b/drivers/scsi/a3000.c @@ -19,26 +19,26 @@ #include "wd33c93.h" #include "a3000.h" -#include +#include -#define DMA(ptr) ((a3000_scsiregs *)((ptr)->base)) -#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) + +#define DMA(ptr) ((a3000_scsiregs *)((ptr)->base)) +#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) static struct Scsi_Host *a3000_host = NULL; static int a3000_release(struct Scsi_Host *instance); -static irqreturn_t a3000_intr (int irq, void *dummy) +static irqreturn_t a3000_intr(int irq, void *dummy) { unsigned long flags; unsigned int status = DMA(a3000_host)->ISTR; if (!(status & ISTR_INT_P)) return IRQ_NONE; - if (status & ISTR_INTS) - { + if (status & ISTR_INTS) { spin_lock_irqsave(a3000_host->host_lock, flags); - wd33c93_intr (a3000_host); + wd33c93_intr(a3000_host); spin_unlock_irqrestore(a3000_host->host_lock, flags); return IRQ_HANDLED; } @@ -48,161 +48,161 @@ static irqreturn_t a3000_intr (int irq, void *dummy) static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { - unsigned short cntr = CNTR_PDMD | CNTR_INTEN; - unsigned long addr = virt_to_bus(cmd->SCp.ptr); - - /* - * if the physical address has the wrong alignment, or if - * physical address is bad, or if it is a write and at the - * end of a physical memory chunk, then allocate a bounce - * buffer - */ - if (addr & A3000_XFER_MASK) - { - HDATA(a3000_host)->dma_bounce_len = (cmd->SCp.this_residual + 511) - & ~0x1ff; - HDATA(a3000_host)->dma_bounce_buffer = - kmalloc (HDATA(a3000_host)->dma_bounce_len, GFP_KERNEL); - - /* can't allocate memory; use PIO */ - if (!HDATA(a3000_host)->dma_bounce_buffer) { - HDATA(a3000_host)->dma_bounce_len = 0; - return 1; - } - - if (!dir_in) { - /* copy to bounce buffer for a write */ - memcpy (HDATA(a3000_host)->dma_bounce_buffer, - cmd->SCp.ptr, cmd->SCp.this_residual); + unsigned short cntr = CNTR_PDMD | CNTR_INTEN; + unsigned long addr = virt_to_bus(cmd->SCp.ptr); + + /* + * if the physical address has the wrong alignment, or if + * physical address is bad, or if it is a write and at the + * end of a physical memory chunk, then allocate a bounce + * buffer + */ + if (addr & A3000_XFER_MASK) { + HDATA(a3000_host)->dma_bounce_len = + (cmd->SCp.this_residual + 511) & ~0x1ff; + HDATA(a3000_host)->dma_bounce_buffer = + kmalloc(HDATA(a3000_host)->dma_bounce_len, GFP_KERNEL); + + /* can't allocate memory; use PIO */ + if (!HDATA(a3000_host)->dma_bounce_buffer) { + HDATA(a3000_host)->dma_bounce_len = 0; + return 1; + } + + if (!dir_in) { + /* copy to bounce buffer for a write */ + memcpy(HDATA(a3000_host)->dma_bounce_buffer, + cmd->SCp.ptr, cmd->SCp.this_residual); + } + + addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer); } - addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer); - } - - /* setup dma direction */ - if (!dir_in) - cntr |= CNTR_DDIR; + /* setup dma direction */ + if (!dir_in) + cntr |= CNTR_DDIR; - /* remember direction */ - HDATA(a3000_host)->dma_dir = dir_in; + /* remember direction */ + HDATA(a3000_host)->dma_dir = dir_in; - DMA(a3000_host)->CNTR = cntr; + DMA(a3000_host)->CNTR = cntr; - /* setup DMA *physical* address */ - DMA(a3000_host)->ACR = addr; + /* setup DMA *physical* address */ + DMA(a3000_host)->ACR = addr; - if (dir_in) - /* invalidate any cache */ - cache_clear (addr, cmd->SCp.this_residual); - else - /* push any dirty cache */ - cache_push (addr, cmd->SCp.this_residual); + if (dir_in) { + /* invalidate any cache */ + cache_clear(addr, cmd->SCp.this_residual); + } else { + /* push any dirty cache */ + cache_push(addr, cmd->SCp.this_residual); + } - /* start DMA */ - mb(); /* make sure setup is completed */ - DMA(a3000_host)->ST_DMA = 1; - mb(); /* make sure DMA has started before next IO */ + /* start DMA */ + mb(); /* make sure setup is completed */ + DMA(a3000_host)->ST_DMA = 1; + mb(); /* make sure DMA has started before next IO */ - /* return success */ - return 0; + /* return success */ + return 0; } static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, int status) { - /* disable SCSI interrupts */ - unsigned short cntr = CNTR_PDMD; - - if (!HDATA(instance)->dma_dir) - cntr |= CNTR_DDIR; - - DMA(instance)->CNTR = cntr; - mb(); /* make sure CNTR is updated before next IO */ - - /* flush if we were reading */ - if (HDATA(instance)->dma_dir) { - DMA(instance)->FLUSH = 1; - mb(); /* don't allow prefetch */ - while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) - barrier(); - mb(); /* no IO until FLUSH is done */ - } - - /* clear a possible interrupt */ - /* I think that this CINT is only necessary if you are - * using the terminal count features. HM 7 Mar 1994 - */ - DMA(instance)->CINT = 1; - - /* stop DMA */ - DMA(instance)->SP_DMA = 1; - mb(); /* make sure DMA is stopped before next IO */ - - /* restore the CONTROL bits (minus the direction flag) */ - DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; - mb(); /* make sure CNTR is updated before next IO */ - - /* copy from a bounce buffer, if necessary */ - if (status && HDATA(instance)->dma_bounce_buffer) { - if (SCpnt) { - if (HDATA(instance)->dma_dir && SCpnt) - memcpy (SCpnt->SCp.ptr, - HDATA(instance)->dma_bounce_buffer, - SCpnt->SCp.this_residual); - kfree (HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; - } else { - kfree (HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; + /* disable SCSI interrupts */ + unsigned short cntr = CNTR_PDMD; + + if (!HDATA(instance)->dma_dir) + cntr |= CNTR_DDIR; + + DMA(instance)->CNTR = cntr; + mb(); /* make sure CNTR is updated before next IO */ + + /* flush if we were reading */ + if (HDATA(instance)->dma_dir) { + DMA(instance)->FLUSH = 1; + mb(); /* don't allow prefetch */ + while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) + barrier(); + mb(); /* no IO until FLUSH is done */ + } + + /* clear a possible interrupt */ + /* I think that this CINT is only necessary if you are + * using the terminal count features. HM 7 Mar 1994 + */ + DMA(instance)->CINT = 1; + + /* stop DMA */ + DMA(instance)->SP_DMA = 1; + mb(); /* make sure DMA is stopped before next IO */ + + /* restore the CONTROL bits (minus the direction flag) */ + DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; + mb(); /* make sure CNTR is updated before next IO */ + + /* copy from a bounce buffer, if necessary */ + if (status && HDATA(instance)->dma_bounce_buffer) { + if (SCpnt) { + if (HDATA(instance)->dma_dir && SCpnt) + memcpy(SCpnt->SCp.ptr, + HDATA(instance)->dma_bounce_buffer, + SCpnt->SCp.this_residual); + kfree(HDATA(instance)->dma_bounce_buffer); + HDATA(instance)->dma_bounce_buffer = NULL; + HDATA(instance)->dma_bounce_len = 0; + } else { + kfree(HDATA(instance)->dma_bounce_buffer); + HDATA(instance)->dma_bounce_buffer = NULL; + HDATA(instance)->dma_bounce_len = 0; + } } - } } static int __init a3000_detect(struct scsi_host_template *tpnt) { - wd33c93_regs regs; - - if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI)) - return 0; - if (!request_mem_region(0xDD0000, 256, "wd33c93")) - return 0; - - tpnt->proc_name = "A3000"; - tpnt->proc_info = &wd33c93_proc_info; - - a3000_host = scsi_register (tpnt, sizeof(struct WD33C93_hostdata)); - if (a3000_host == NULL) - goto fail_register; - - a3000_host->base = ZTWO_VADDR(0xDD0000); - a3000_host->irq = IRQ_AMIGA_PORTS; - DMA(a3000_host)->DAWR = DAWR_A3000; - regs.SASR = &(DMA(a3000_host)->SASR); - regs.SCMD = &(DMA(a3000_host)->SCMD); - HDATA(a3000_host)->no_sync = 0xff; - HDATA(a3000_host)->fast = 0; - HDATA(a3000_host)->dma_mode = CTRL_DMA; - wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15); - if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI", - a3000_intr)) - goto fail_irq; - DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN; - - return 1; + wd33c93_regs regs; + + if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI)) + return 0; + if (!request_mem_region(0xDD0000, 256, "wd33c93")) + return 0; + + tpnt->proc_name = "A3000"; + tpnt->proc_info = &wd33c93_proc_info; + + a3000_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata)); + if (a3000_host == NULL) + goto fail_register; + + a3000_host->base = ZTWO_VADDR(0xDD0000); + a3000_host->irq = IRQ_AMIGA_PORTS; + DMA(a3000_host)->DAWR = DAWR_A3000; + regs.SASR = &(DMA(a3000_host)->SASR); + regs.SCMD = &(DMA(a3000_host)->SCMD); + HDATA(a3000_host)->no_sync = 0xff; + HDATA(a3000_host)->fast = 0; + HDATA(a3000_host)->dma_mode = CTRL_DMA; + wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15); + if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI", + a3000_intr)) + goto fail_irq; + DMA(a3000_host)->CNTR = CNTR_PDMD | CNTR_INTEN; + + return 1; fail_irq: - scsi_unregister(a3000_host); + scsi_unregister(a3000_host); fail_register: - release_mem_region(0xDD0000, 256); - return 0; + release_mem_region(0xDD0000, 256); + return 0; } static int a3000_bus_reset(struct scsi_cmnd *cmd) { /* FIXME perform bus-specific reset */ - + /* FIXME 2: kill this entire function, which should cause mid-layer to call wd33c93_host_reset anyway? */ @@ -236,10 +236,10 @@ static struct scsi_host_template driver_template = { static int a3000_release(struct Scsi_Host *instance) { - DMA(instance)->CNTR = 0; - release_mem_region(0xDD0000, 256); - free_irq(IRQ_AMIGA_PORTS, a3000_intr); - return 1; + DMA(instance)->CNTR = 0; + release_mem_region(0xDD0000, 256); + free_irq(IRQ_AMIGA_PORTS, a3000_intr); + return 1; } MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/a3000.h b/drivers/scsi/a3000.h index c7afe16fd6e4..684813ee378c 100644 --- a/drivers/scsi/a3000.h +++ b/drivers/scsi/a3000.h @@ -12,40 +12,40 @@ #include #ifndef CMD_PER_LUN -#define CMD_PER_LUN 2 +#define CMD_PER_LUN 2 #endif #ifndef CAN_QUEUE -#define CAN_QUEUE 16 +#define CAN_QUEUE 16 #endif /* * if the transfer address ANDed with this results in a non-zero * result, then we can't use DMA. */ -#define A3000_XFER_MASK (0x00000003) +#define A3000_XFER_MASK (0x00000003) typedef struct { - unsigned char pad1[2]; - volatile unsigned short DAWR; - volatile unsigned int WTC; - unsigned char pad2[2]; - volatile unsigned short CNTR; - volatile unsigned long ACR; - unsigned char pad3[2]; - volatile unsigned short ST_DMA; - unsigned char pad4[2]; - volatile unsigned short FLUSH; - unsigned char pad5[2]; - volatile unsigned short CINT; - unsigned char pad6[2]; - volatile unsigned short ISTR; - unsigned char pad7[30]; - volatile unsigned short SP_DMA; - unsigned char pad8; - volatile unsigned char SASR; - unsigned char pad9; - volatile unsigned char SCMD; + unsigned char pad1[2]; + volatile unsigned short DAWR; + volatile unsigned int WTC; + unsigned char pad2[2]; + volatile unsigned short CNTR; + volatile unsigned long ACR; + unsigned char pad3[2]; + volatile unsigned short ST_DMA; + unsigned char pad4[2]; + volatile unsigned short FLUSH; + unsigned char pad5[2]; + volatile unsigned short CINT; + unsigned char pad6[2]; + volatile unsigned short ISTR; + unsigned char pad7[30]; + volatile unsigned short SP_DMA; + unsigned char pad8; + volatile unsigned char SASR; + unsigned char pad9; + volatile unsigned char SCMD; } a3000_scsiregs; #define DAWR_A3000 (3) -- cgit v1.2.2 From 6d1d5d43e5911bfdb7ec47cc3d1438dbbf2a9de2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 4 Apr 2010 11:00:36 +0200 Subject: [SCSI] a2091: Use shost_priv() and kill ugly HDATA() macro Signed-off-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- drivers/scsi/a2091.c | 56 +++++++++++++++++++++++++++------------------------- 1 file changed, 29 insertions(+), 27 deletions(-) diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c index 8469c239f9fb..95584059863b 100644 --- a/drivers/scsi/a2091.c +++ b/drivers/scsi/a2091.c @@ -23,7 +23,6 @@ #define DMA(ptr) ((a2091_scsiregs *)((ptr)->base)) -#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) static int a2091_release(struct Scsi_Host *instance); @@ -45,39 +44,39 @@ static irqreturn_t a2091_intr(int irq, void *_instance) static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { + struct Scsi_Host *instance = cmd->device->host; + struct WD33C93_hostdata *hdata = shost_priv(instance); unsigned short cntr = CNTR_PDMD | CNTR_INTEN; unsigned long addr = virt_to_bus(cmd->SCp.ptr); - struct Scsi_Host *instance = cmd->device->host; /* don't allow DMA if the physical address is bad */ if (addr & A2091_XFER_MASK) { - HDATA(instance)->dma_bounce_len = - (cmd->SCp.this_residual + 511) & ~0x1ff; - HDATA(instance)->dma_bounce_buffer = - kmalloc(HDATA(instance)->dma_bounce_len, GFP_KERNEL); + hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff; + hdata->dma_bounce_buffer = kmalloc(hdata->dma_bounce_len, + GFP_KERNEL); /* can't allocate memory; use PIO */ - if (!HDATA(instance)->dma_bounce_buffer) { - HDATA(instance)->dma_bounce_len = 0; + if (!hdata->dma_bounce_buffer) { + hdata->dma_bounce_len = 0; return 1; } /* get the physical address of the bounce buffer */ - addr = virt_to_bus(HDATA(instance)->dma_bounce_buffer); + addr = virt_to_bus(hdata->dma_bounce_buffer); /* the bounce buffer may not be in the first 16M of physmem */ if (addr & A2091_XFER_MASK) { /* we could use chipmem... maybe later */ - kfree(HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; + kfree(hdata->dma_bounce_buffer); + hdata->dma_bounce_buffer = NULL; + hdata->dma_bounce_len = 0; return 1; } if (!dir_in) { /* copy to bounce buffer for a write */ - memcpy(HDATA(instance)->dma_bounce_buffer, - cmd->SCp.ptr, cmd->SCp.this_residual); + memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr, + cmd->SCp.this_residual); } } @@ -86,7 +85,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) cntr |= CNTR_DDIR; /* remember direction */ - HDATA(cmd->device->host)->dma_dir = dir_in; + hdata->dma_dir = dir_in; DMA(cmd->device->host)->CNTR = cntr; @@ -110,17 +109,19 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, int status) { + struct WD33C93_hostdata *hdata = shost_priv(instance); + /* disable SCSI interrupts */ unsigned short cntr = CNTR_PDMD; - if (!HDATA(instance)->dma_dir) + if (!hdata->dma_dir) cntr |= CNTR_DDIR; /* disable SCSI interrupts */ DMA(instance)->CNTR = cntr; /* flush if we were reading */ - if (HDATA(instance)->dma_dir) { + if (hdata->dma_dir) { DMA(instance)->FLUSH = 1; while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) ; @@ -136,14 +137,13 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; /* copy from a bounce buffer, if necessary */ - if (status && HDATA(instance)->dma_bounce_buffer) { - if (HDATA(instance)->dma_dir) - memcpy(SCpnt->SCp.ptr, - HDATA(instance)->dma_bounce_buffer, + if (status && hdata->dma_bounce_buffer) { + if (hdata->dma_dir) + memcpy(SCpnt->SCp.ptr, hdata->dma_bounce_buffer, SCpnt->SCp.this_residual); - kfree(HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; + kfree(hdata->dma_bounce_buffer); + hdata->dma_bounce_buffer = NULL; + hdata->dma_bounce_len = 0; } } @@ -154,6 +154,7 @@ static int __init a2091_detect(struct scsi_host_template *tpnt) unsigned long address; struct zorro_dev *z = NULL; wd33c93_regs regs; + struct WD33C93_hostdata *hdata; int num_a2091 = 0; if (!MACH_IS_AMIGA || called) @@ -180,9 +181,10 @@ static int __init a2091_detect(struct scsi_host_template *tpnt) DMA(instance)->DAWR = DAWR_A2091; regs.SASR = &(DMA(instance)->SASR); regs.SCMD = &(DMA(instance)->SCMD); - HDATA(instance)->no_sync = 0xff; - HDATA(instance)->fast = 0; - HDATA(instance)->dma_mode = CTRL_DMA; + hdata = shost_priv(instance); + hdata->no_sync = 0xff; + hdata->fast = 0; + hdata->dma_mode = CTRL_DMA; wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10); if (request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, -- cgit v1.2.2 From 52c3d8a65f779430bfae1305f7d50eb44df9875e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 4 Apr 2010 11:00:37 +0200 Subject: [SCSI] gvp11: Use shost_priv() and kill ugly HDATA() macro Signed-off-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- drivers/scsi/gvp11.c | 93 ++++++++++++++++++++++++++-------------------------- 1 file changed, 46 insertions(+), 47 deletions(-) diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c index bd5d90328ee0..18b7102bb80e 100644 --- a/drivers/scsi/gvp11.c +++ b/drivers/scsi/gvp11.c @@ -23,7 +23,6 @@ #define DMA(ptr) ((gvp11_scsiregs *)((ptr)->base)) -#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) static irqreturn_t gvp11_intr(int irq, void *_instance) { @@ -50,70 +49,66 @@ void gvp11_setup(char *str, int *ints) static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { + struct Scsi_Host *instance = cmd->device->host; + struct WD33C93_hostdata *hdata = shost_priv(instance); unsigned short cntr = GVP11_DMAC_INT_ENABLE; unsigned long addr = virt_to_bus(cmd->SCp.ptr); int bank_mask; static int scsi_alloc_out_of_range = 0; /* use bounce buffer if the physical address is bad */ - if (addr & HDATA(cmd->device->host)->dma_xfer_mask) { - HDATA(cmd->device->host)->dma_bounce_len = - (cmd->SCp.this_residual + 511) & ~0x1ff; + if (addr & hdata->dma_xfer_mask) { + hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff; if (!scsi_alloc_out_of_range) { - HDATA(cmd->device->host)->dma_bounce_buffer = - kmalloc(HDATA(cmd->device->host)->dma_bounce_len, - GFP_KERNEL); - HDATA(cmd->device->host)->dma_buffer_pool = - BUF_SCSI_ALLOCED; + hdata->dma_bounce_buffer = + kmalloc(hdata->dma_bounce_len, GFP_KERNEL); + hdata->dma_buffer_pool = BUF_SCSI_ALLOCED; } if (scsi_alloc_out_of_range || - !HDATA(cmd->device->host)->dma_bounce_buffer) { - HDATA(cmd->device->host)->dma_bounce_buffer = - amiga_chip_alloc(HDATA(cmd->device->host)->dma_bounce_len, + !hdata->dma_bounce_buffer) { + hdata->dma_bounce_buffer = + amiga_chip_alloc(hdata->dma_bounce_len, "GVP II SCSI Bounce Buffer"); - if (!HDATA(cmd->device->host)->dma_bounce_buffer) { - HDATA(cmd->device->host)->dma_bounce_len = 0; + if (!hdata->dma_bounce_buffer) { + hdata->dma_bounce_len = 0; return 1; } - HDATA(cmd->device->host)->dma_buffer_pool = - BUF_CHIP_ALLOCED; + hdata->dma_buffer_pool = BUF_CHIP_ALLOCED; } /* check if the address of the bounce buffer is OK */ - addr = virt_to_bus(HDATA(cmd->device->host)->dma_bounce_buffer); + addr = virt_to_bus(hdata->dma_bounce_buffer); - if (addr & HDATA(cmd->device->host)->dma_xfer_mask) { + if (addr & hdata->dma_xfer_mask) { /* fall back to Chip RAM if address out of range */ - if (HDATA(cmd->device->host)->dma_buffer_pool == - BUF_SCSI_ALLOCED) { - kfree(HDATA(cmd->device->host)->dma_bounce_buffer); + if (hdata->dma_buffer_pool == BUF_SCSI_ALLOCED) { + kfree(hdata->dma_bounce_buffer); scsi_alloc_out_of_range = 1; } else { - amiga_chip_free(HDATA(cmd->device->host)->dma_bounce_buffer); + amiga_chip_free(hdata->dma_bounce_buffer); } - HDATA(cmd->device->host)->dma_bounce_buffer = - amiga_chip_alloc(HDATA(cmd->device->host)->dma_bounce_len, + hdata->dma_bounce_buffer = + amiga_chip_alloc(hdata->dma_bounce_len, "GVP II SCSI Bounce Buffer"); - if (!HDATA(cmd->device->host)->dma_bounce_buffer) { - HDATA(cmd->device->host)->dma_bounce_len = 0; + if (!hdata->dma_bounce_buffer) { + hdata->dma_bounce_len = 0; return 1; } - addr = virt_to_bus(HDATA(cmd->device->host)->dma_bounce_buffer); - HDATA(cmd->device->host)->dma_buffer_pool = - BUF_CHIP_ALLOCED; + addr = virt_to_bus(hdata->dma_bounce_buffer); + hdata->dma_buffer_pool = BUF_CHIP_ALLOCED; } if (!dir_in) { /* copy to bounce buffer for a write */ - memcpy(HDATA(cmd->device->host)->dma_bounce_buffer, - cmd->SCp.ptr, cmd->SCp.this_residual); + memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr, + cmd->SCp.this_residual); } } @@ -121,7 +116,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) if (!dir_in) cntr |= GVP11_DMAC_DIR_WRITE; - HDATA(cmd->device->host)->dma_dir = dir_in; + hdata->dma_dir = dir_in; DMA(cmd->device->host)->CNTR = cntr; /* setup DMA *physical* address */ @@ -135,7 +130,8 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) cache_push(addr, cmd->SCp.this_residual); } - if ((bank_mask = (~HDATA(cmd->device->host)->dma_xfer_mask >> 18) & 0x01c0)) + bank_mask = (~hdata->dma_xfer_mask >> 18) & 0x01c0; + if (bank_mask) DMA(cmd->device->host)->BANK = bank_mask & (addr >> 18); /* start DMA */ @@ -148,25 +144,26 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, int status) { + struct WD33C93_hostdata *hdata = shost_priv(instance); + /* stop DMA */ DMA(instance)->SP_DMA = 1; /* remove write bit from CONTROL bits */ DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE; /* copy from a bounce buffer, if necessary */ - if (status && HDATA(instance)->dma_bounce_buffer) { - if (HDATA(instance)->dma_dir && SCpnt) - memcpy(SCpnt->SCp.ptr, - HDATA(instance)->dma_bounce_buffer, + if (status && hdata->dma_bounce_buffer) { + if (hdata->dma_dir && SCpnt) + memcpy(SCpnt->SCp.ptr, hdata->dma_bounce_buffer, SCpnt->SCp.this_residual); - if (HDATA(instance)->dma_buffer_pool == BUF_SCSI_ALLOCED) - kfree(HDATA(instance)->dma_bounce_buffer); + if (hdata->dma_buffer_pool == BUF_SCSI_ALLOCED) + kfree(hdata->dma_bounce_buffer); else - amiga_chip_free(HDATA(instance)->dma_bounce_buffer); + amiga_chip_free(hdata->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; + hdata->dma_bounce_buffer = NULL; + hdata->dma_bounce_len = 0; } } @@ -180,6 +177,7 @@ int __init gvp11_detect(struct scsi_host_template *tpnt) unsigned int epc; struct zorro_dev *z = NULL; unsigned int default_dma_xfer_mask; + struct WD33C93_hostdata *hdata; wd33c93_regs regs; int num_gvp11 = 0; #ifdef CHECK_WD33C93 @@ -306,10 +304,11 @@ int __init gvp11_detect(struct scsi_host_template *tpnt) instance->irq = IRQ_AMIGA_PORTS; instance->unique_id = z->slotaddr; + hdata = shost_priv(instance); if (gvp11_xfer_mask) - HDATA(instance)->dma_xfer_mask = gvp11_xfer_mask; + hdata->dma_xfer_mask = gvp11_xfer_mask; else - HDATA(instance)->dma_xfer_mask = default_dma_xfer_mask; + hdata->dma_xfer_mask = default_dma_xfer_mask; DMA(instance)->secret2 = 1; DMA(instance)->secret1 = 0; @@ -327,9 +326,9 @@ int __init gvp11_detect(struct scsi_host_template *tpnt) */ regs.SASR = &(DMA(instance)->SASR); regs.SCMD = &(DMA(instance)->SCMD); - HDATA(instance)->no_sync = 0xff; - HDATA(instance)->fast = 0; - HDATA(instance)->dma_mode = CTRL_DMA; + hdata->no_sync = 0xff; + hdata->fast = 0; + hdata->dma_mode = CTRL_DMA; wd33c93_init(instance, regs, dma_setup, dma_stop, (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10 : WD33C93_FS_12_15); -- cgit v1.2.2 From ce195662bbc063c29294c11a57aa2db182a837ea Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 4 Apr 2010 11:00:38 +0200 Subject: [SCSI] mvme147: Use shost_priv() and kill ugly HDATA() macro Signed-off-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- drivers/scsi/mvme147.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c index b236d72850d1..716d1785cda7 100644 --- a/drivers/scsi/mvme147.c +++ b/drivers/scsi/mvme147.c @@ -16,8 +16,6 @@ #include -#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) - static struct Scsi_Host *mvme147_host = NULL; static irqreturn_t mvme147_intr(int irq, void *dummy) @@ -31,6 +29,7 @@ static irqreturn_t mvme147_intr(int irq, void *dummy) static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { + struct WD33C93_hostdata *hdata = shost_priv(mvme147_host); unsigned char flags = 0x01; unsigned long addr = virt_to_bus(cmd->SCp.ptr); @@ -39,7 +38,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) flags |= 0x04; /* remember direction */ - HDATA(mvme147_host)->dma_dir = dir_in; + hdata->dma_dir = dir_in; if (dir_in) { /* invalidate any cache */ @@ -68,6 +67,7 @@ int mvme147_detect(struct scsi_host_template *tpnt) { static unsigned char called = 0; wd33c93_regs regs; + struct WD33C93_hostdata *hdata; if (!MACH_IS_MVME147 || called) return 0; @@ -84,9 +84,10 @@ int mvme147_detect(struct scsi_host_template *tpnt) mvme147_host->irq = MVME147_IRQ_SCSI_PORT; regs.SASR = (volatile unsigned char *)0xfffe4000; regs.SCMD = (volatile unsigned char *)0xfffe4001; - HDATA(mvme147_host)->no_sync = 0xff; - HDATA(mvme147_host)->fast = 0; - HDATA(mvme147_host)->dma_mode = CTRL_DMA; + hdata = shost_priv(mvme147_host); + hdata->no_sync = 0xff; + hdata->fast = 0; + hdata->dma_mode = CTRL_DMA; wd33c93_init(mvme147_host, regs, dma_setup, dma_stop, WD33C93_FS_8_10); if (request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0, -- cgit v1.2.2 From afdbbc16134ae2eea612b51cab7545938d266dce Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 4 Apr 2010 11:00:39 +0200 Subject: [SCSI] a3000: Use shost_priv() and kill ugly HDATA() macro Signed-off-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- drivers/scsi/a3000.c | 53 +++++++++++++++++++++++++++------------------------- 1 file changed, 28 insertions(+), 25 deletions(-) diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c index 31434f7c3685..bc6eb69f5fd0 100644 --- a/drivers/scsi/a3000.c +++ b/drivers/scsi/a3000.c @@ -23,7 +23,6 @@ #define DMA(ptr) ((a3000_scsiregs *)((ptr)->base)) -#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) static struct Scsi_Host *a3000_host = NULL; @@ -48,6 +47,7 @@ static irqreturn_t a3000_intr(int irq, void *dummy) static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { + struct WD33C93_hostdata *hdata = shost_priv(a3000_host); unsigned short cntr = CNTR_PDMD | CNTR_INTEN; unsigned long addr = virt_to_bus(cmd->SCp.ptr); @@ -58,24 +58,23 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) * buffer */ if (addr & A3000_XFER_MASK) { - HDATA(a3000_host)->dma_bounce_len = - (cmd->SCp.this_residual + 511) & ~0x1ff; - HDATA(a3000_host)->dma_bounce_buffer = - kmalloc(HDATA(a3000_host)->dma_bounce_len, GFP_KERNEL); + hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff; + hdata->dma_bounce_buffer = kmalloc(hdata->dma_bounce_len, + GFP_KERNEL); /* can't allocate memory; use PIO */ - if (!HDATA(a3000_host)->dma_bounce_buffer) { - HDATA(a3000_host)->dma_bounce_len = 0; + if (!hdata->dma_bounce_buffer) { + hdata->dma_bounce_len = 0; return 1; } if (!dir_in) { /* copy to bounce buffer for a write */ - memcpy(HDATA(a3000_host)->dma_bounce_buffer, - cmd->SCp.ptr, cmd->SCp.this_residual); + memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr, + cmd->SCp.this_residual); } - addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer); + addr = virt_to_bus(hdata->dma_bounce_buffer); } /* setup dma direction */ @@ -83,7 +82,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) cntr |= CNTR_DDIR; /* remember direction */ - HDATA(a3000_host)->dma_dir = dir_in; + hdata->dma_dir = dir_in; DMA(a3000_host)->CNTR = cntr; @@ -110,17 +109,19 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, int status) { + struct WD33C93_hostdata *hdata = shost_priv(instance); + /* disable SCSI interrupts */ unsigned short cntr = CNTR_PDMD; - if (!HDATA(instance)->dma_dir) + if (!hdata->dma_dir) cntr |= CNTR_DDIR; DMA(instance)->CNTR = cntr; mb(); /* make sure CNTR is updated before next IO */ /* flush if we were reading */ - if (HDATA(instance)->dma_dir) { + if (hdata->dma_dir) { DMA(instance)->FLUSH = 1; mb(); /* don't allow prefetch */ while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) @@ -143,19 +144,19 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, mb(); /* make sure CNTR is updated before next IO */ /* copy from a bounce buffer, if necessary */ - if (status && HDATA(instance)->dma_bounce_buffer) { + if (status && hdata->dma_bounce_buffer) { if (SCpnt) { - if (HDATA(instance)->dma_dir && SCpnt) + if (hdata->dma_dir && SCpnt) memcpy(SCpnt->SCp.ptr, - HDATA(instance)->dma_bounce_buffer, + hdata->dma_bounce_buffer, SCpnt->SCp.this_residual); - kfree(HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; + kfree(hdata->dma_bounce_buffer); + hdata->dma_bounce_buffer = NULL; + hdata->dma_bounce_len = 0; } else { - kfree(HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; + kfree(hdata->dma_bounce_buffer); + hdata->dma_bounce_buffer = NULL; + hdata->dma_bounce_len = 0; } } } @@ -163,6 +164,7 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, static int __init a3000_detect(struct scsi_host_template *tpnt) { wd33c93_regs regs; + struct WD33C93_hostdata *hdata; if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(A3000_SCSI)) return 0; @@ -181,9 +183,10 @@ static int __init a3000_detect(struct scsi_host_template *tpnt) DMA(a3000_host)->DAWR = DAWR_A3000; regs.SASR = &(DMA(a3000_host)->SASR); regs.SCMD = &(DMA(a3000_host)->SCMD); - HDATA(a3000_host)->no_sync = 0xff; - HDATA(a3000_host)->fast = 0; - HDATA(a3000_host)->dma_mode = CTRL_DMA; + hdata = shost_priv(a3000_host); + hdata->no_sync = 0xff; + hdata->fast = 0; + hdata->dma_mode = CTRL_DMA; wd33c93_init(a3000_host, regs, dma_setup, dma_stop, WD33C93_FS_12_15); if (request_irq(IRQ_AMIGA_PORTS, a3000_intr, IRQF_SHARED, "A3000 SCSI", a3000_intr)) -- cgit v1.2.2 From b1de6ab79456724d316d5dfa4bbb28f166cda99e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 4 Apr 2010 11:00:40 +0200 Subject: [SCSI] a2091: Kill ugly DMA() macro Signed-off-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- drivers/scsi/a2091.c | 48 ++++++++++++++++++++++++++---------------------- 1 file changed, 26 insertions(+), 22 deletions(-) diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c index 95584059863b..308541ff85cf 100644 --- a/drivers/scsi/a2091.c +++ b/drivers/scsi/a2091.c @@ -22,17 +22,15 @@ #include -#define DMA(ptr) ((a2091_scsiregs *)((ptr)->base)) - static int a2091_release(struct Scsi_Host *instance); -static irqreturn_t a2091_intr(int irq, void *_instance) +static irqreturn_t a2091_intr(int irq, void *data) { + struct Scsi_Host *instance = data; + a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); + unsigned int status = regs->ISTR; unsigned long flags; - unsigned int status; - struct Scsi_Host *instance = (struct Scsi_Host *)_instance; - status = DMA(instance)->ISTR; if (!(status & (ISTR_INT_F | ISTR_INT_P)) || !(status & ISTR_INTS)) return IRQ_NONE; @@ -46,6 +44,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) { struct Scsi_Host *instance = cmd->device->host; struct WD33C93_hostdata *hdata = shost_priv(instance); + a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); unsigned short cntr = CNTR_PDMD | CNTR_INTEN; unsigned long addr = virt_to_bus(cmd->SCp.ptr); @@ -87,10 +86,10 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) /* remember direction */ hdata->dma_dir = dir_in; - DMA(cmd->device->host)->CNTR = cntr; + regs->CNTR = cntr; /* setup DMA *physical* address */ - DMA(cmd->device->host)->ACR = addr; + regs->ACR = addr; if (dir_in) { /* invalidate any cache */ @@ -100,7 +99,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) cache_push(addr, cmd->SCp.this_residual); } /* start DMA */ - DMA(cmd->device->host)->ST_DMA = 1; + regs->ST_DMA = 1; /* return success */ return 0; @@ -110,6 +109,7 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, int status) { struct WD33C93_hostdata *hdata = shost_priv(instance); + a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); /* disable SCSI interrupts */ unsigned short cntr = CNTR_PDMD; @@ -118,23 +118,23 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, cntr |= CNTR_DDIR; /* disable SCSI interrupts */ - DMA(instance)->CNTR = cntr; + regs->CNTR = cntr; /* flush if we were reading */ if (hdata->dma_dir) { - DMA(instance)->FLUSH = 1; - while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) + regs->FLUSH = 1; + while (!(regs->ISTR & ISTR_FE_FLG)) ; } /* clear a possible interrupt */ - DMA(instance)->CINT = 1; + regs->CINT = 1; /* stop DMA */ - DMA(instance)->SP_DMA = 1; + regs->SP_DMA = 1; /* restore the CONTROL bits (minus the direction flag) */ - DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; + regs->CNTR = CNTR_PDMD | CNTR_INTEN; /* copy from a bounce buffer, if necessary */ if (status && hdata->dma_bounce_buffer) { @@ -153,7 +153,8 @@ static int __init a2091_detect(struct scsi_host_template *tpnt) struct Scsi_Host *instance; unsigned long address; struct zorro_dev *z = NULL; - wd33c93_regs regs; + wd33c93_regs wdregs; + a2091_scsiregs *regs; struct WD33C93_hostdata *hdata; int num_a2091 = 0; @@ -178,19 +179,20 @@ static int __init a2091_detect(struct scsi_host_template *tpnt) instance->base = ZTWO_VADDR(address); instance->irq = IRQ_AMIGA_PORTS; instance->unique_id = z->slotaddr; - DMA(instance)->DAWR = DAWR_A2091; - regs.SASR = &(DMA(instance)->SASR); - regs.SCMD = &(DMA(instance)->SCMD); + regs = (a2091_scsiregs *)(instance->base); + regs->DAWR = DAWR_A2091; + wdregs.SASR = ®s->SASR; + wdregs.SCMD = ®s->SCMD; hdata = shost_priv(instance); hdata->no_sync = 0xff; hdata->fast = 0; hdata->dma_mode = CTRL_DMA; - wd33c93_init(instance, regs, dma_setup, dma_stop, + wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10); if (request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, "A2091 SCSI", instance)) goto unregister; - DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; + regs->CNTR = CNTR_PDMD | CNTR_INTEN; num_a2091++; continue; @@ -241,7 +243,9 @@ static struct scsi_host_template driver_template = { static int a2091_release(struct Scsi_Host *instance) { #ifdef MODULE - DMA(instance)->CNTR = 0; + a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); + + regs->CNTR = 0; release_mem_region(ZTWO_PADDR(instance->base), 256); free_irq(IRQ_AMIGA_PORTS, instance); #endif -- cgit v1.2.2 From 0b9dae6aeb0e5397b426e135509046b323740fd5 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 4 May 2010 15:01:21 -0700 Subject: [SCSI] qla2xxx: Check for ISP84xx before processing to get 84xx firmware version. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index c272af4a76e4..d416c3599e38 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1198,9 +1198,11 @@ qla24xx_84xx_fw_version_show(struct device *dev, scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); struct qla_hw_data *ha = vha->hw; - if (IS_QLA84XX(ha) && ha->cs84xx) - if (ha->cs84xx->op_fw_version == 0) - rval = qla84xx_verify_chip(vha, status); + if (!IS_QLA84XX(ha)) + return snprintf(buf, PAGE_SIZE, "\n"); + + if (ha->cs84xx && ha->cs84xx->op_fw_version == 0) + rval = qla84xx_verify_chip(vha, status); if ((rval == QLA_SUCCESS) && (status[0] == 0)) return snprintf(buf, PAGE_SIZE, "%u\n", -- cgit v1.2.2 From 62542f4b05a4515ff75320600ffeb2e7447d25fe Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 4 May 2010 15:01:22 -0700 Subject: [SCSI] qla2xxx: Display proper link state for disconnected ports. With qla2xxx using mid-layer async-scsi-scanning, the link state for disconnected port is displayed wrong. Additional check for cable presence is considered to display proper link state. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index d416c3599e38..5c98b097cfda 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -987,7 +987,8 @@ qla2x00_link_state_show(struct device *dev, struct device_attribute *attr, int len = 0; if (atomic_read(&vha->loop_state) == LOOP_DOWN || - atomic_read(&vha->loop_state) == LOOP_DEAD) + atomic_read(&vha->loop_state) == LOOP_DEAD || + vha->device_flags & DFLG_NO_CABLE) len = snprintf(buf, PAGE_SIZE, "Link Down\n"); else if (atomic_read(&vha->loop_state) != LOOP_READY || test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || -- cgit v1.2.2 From 3e46f031322bdd8d1f11e17fb7cf00c38b08dd55 Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Tue, 4 May 2010 15:01:23 -0700 Subject: [SCSI] qla2xxx: Clear error status after uncorrectable non-fatal errors. Currently error status is cleared only after the uncorrectable fatal errors in the qla2xxx_pci_slot_reset. This fix is added to clear the error status in qla2xxx_pci_resume. This way for both fatal and non-fatal errors the error status gets cleared properly. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=572258 Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index b1adeb71a8b0..f2102db03160 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -3697,7 +3697,6 @@ qla2xxx_pci_slot_reset(struct pci_dev *pdev) ret = PCI_ERS_RESULT_RECOVERED; clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags); - pci_cleanup_aer_uncorrect_error_status(pdev); DEBUG17(qla_printk(KERN_WARNING, ha, "slot_reset-return:ret=%x\n", ret)); @@ -3721,6 +3720,8 @@ qla2xxx_pci_resume(struct pci_dev *pdev) "from slot/link_reset"); } + pci_cleanup_aer_uncorrect_error_status(pdev); + ha->flags.eeh_busy = 0; } -- cgit v1.2.2 From 6a03b4cd78f3f2695a2d0e6343d555b3de0e67c1 Mon Sep 17 00:00:00 2001 From: Harish Zunjarrao Date: Tue, 4 May 2010 15:01:24 -0700 Subject: [SCSI] qla2xxx: Add char device to increase driver use count The driver should not be unloaded if any application is using it. To disallow driver unload, driver use count must be incremented. Application uses this char device as handle and increases driver use count to avoid possible driver unload. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 3 ++- drivers/scsi/qla2xxx/qla_os.c | 14 ++++++++++++++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index edb7a704ed77..d4a53e5549b9 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -35,7 +35,8 @@ #include "qla_bsg.h" #include "qla_nx.h" -#define QLA2XXX_DRIVER_NAME "qla2xxx" +#define QLA2XXX_DRIVER_NAME "qla2xxx" +#define QLA2XXX_APIDEV "ql2xapidev" /* * We have MAILBOX_REGISTER_COUNT sized arrays in a few places, diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index f2102db03160..10c14af2235b 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -24,6 +24,8 @@ */ char qla2x00_version_str[40]; +static int apidev_major; + /* * SRB allocation cache */ @@ -3763,6 +3765,10 @@ static struct pci_driver qla2xxx_pci_driver = { .err_handler = &qla2xxx_err_handler, }; +static struct file_operations apidev_fops = { + .owner = THIS_MODULE, +}; + /** * qla2x00_module_init - Module initialization. **/ @@ -3791,6 +3797,13 @@ qla2x00_module_init(void) kmem_cache_destroy(srb_cachep); return -ENODEV; } + + apidev_major = register_chrdev(0, QLA2XXX_APIDEV, &apidev_fops); + if (apidev_major < 0) { + printk(KERN_WARNING "qla2xxx: Unable to register char device " + "%s\n", QLA2XXX_APIDEV); + } + qla2xxx_transport_vport_template = fc_attach_transport(&qla2xxx_transport_vport_functions); if (!qla2xxx_transport_vport_template) { @@ -3816,6 +3829,7 @@ qla2x00_module_init(void) static void __exit qla2x00_module_exit(void) { + unregister_chrdev(apidev_major, QLA2XXX_APIDEV); pci_unregister_driver(&qla2xxx_pci_driver); qla2x00_release_firmware(); kmem_cache_destroy(srb_cachep); -- cgit v1.2.2 From 99b0bec7bbf3350d1a920a7138fa62c456a8ecf1 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 4 May 2010 15:01:25 -0700 Subject: [SCSI] qla2xxx: Further generalization of SRB CTX infrastructure. Prepare CTX infrastructure for additional asynchronous executions, add generic done() operator, pull CMD definitions. Signed-off-by: Andrew Vasquez Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 17 ++++++---- drivers/scsi/qla2xxx/qla_init.c | 43 ++++++++++++++++++------ drivers/scsi/qla2xxx/qla_isr.c | 74 ++++++++++++----------------------------- 3 files changed, 65 insertions(+), 69 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index d4a53e5549b9..b3cf6099600b 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -214,14 +214,21 @@ typedef struct srb { /* * SRB extensions. */ -struct srb_ctx { #define SRB_LOGIN_CMD 1 #define SRB_LOGOUT_CMD 2 +#define SRB_ELS_CMD_RPT 3 +#define SRB_ELS_CMD_HST 4 +#define SRB_CT_CMD 5 + +struct srb_ctx { uint16_t type; + char *name; + struct timer_list timer; - void (*free)(srb_t *sp); - void (*timeout)(srb_t *sp); + void (*done)(srb_t *); + void (*free)(srb_t *); + void (*timeout)(srb_t *); }; struct srb_logio { @@ -231,12 +238,10 @@ struct srb_logio { #define SRB_LOGIN_COND_PLOGI BIT_1 #define SRB_LOGIN_SKIP_PRLI BIT_2 uint16_t flags; + uint16_t data[2]; }; struct srb_bsg_ctx { -#define SRB_ELS_CMD_RPT 3 -#define SRB_ELS_CMD_HST 4 -#define SRB_CT_CMD 5 uint16_t type; }; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 55540d2d4e38..c3c2c3627a70 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -117,13 +117,22 @@ qla2x00_async_logio_timeout(srb_t *sp) DEBUG2(printk(KERN_WARNING "scsi(%ld:%x): Async-%s timeout.\n", - fcport->vha->host_no, sp->handle, - lio->ctx.type == SRB_LOGIN_CMD ? "login": "logout")); + fcport->vha->host_no, sp->handle, lio->ctx.name)); if (lio->ctx.type == SRB_LOGIN_CMD) qla2x00_post_async_logout_work(fcport->vha, fcport, NULL); } +static void +qla2x00_async_login_ctx_done(srb_t *sp) +{ + struct srb_logio *lio = sp->ctx; + + qla2x00_post_async_login_done_work(sp->fcport->vha, sp->fcport, + lio->data); + lio->ctx.free(sp); +} + int qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport, uint16_t *data) @@ -141,7 +150,9 @@ qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport, lio = sp->ctx; lio->ctx.type = SRB_LOGIN_CMD; + lio->ctx.name = "login"; lio->ctx.timeout = qla2x00_async_logio_timeout; + lio->ctx.done = qla2x00_async_login_ctx_done; lio->flags |= SRB_LOGIN_COND_PLOGI; if (data[1] & QLA_LOGIO_LOGIN_RETRIED) lio->flags |= SRB_LOGIN_RETRIED; @@ -163,6 +174,16 @@ done: return rval; } +static void +qla2x00_async_logout_ctx_done(srb_t *sp) +{ + struct srb_logio *lio = sp->ctx; + + qla2x00_post_async_logout_done_work(sp->fcport->vha, sp->fcport, + lio->data); + lio->ctx.free(sp); +} + int qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport) { @@ -179,7 +200,9 @@ qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport) lio = sp->ctx; lio->ctx.type = SRB_LOGOUT_CMD; + lio->ctx.name = "logout"; lio->ctx.timeout = qla2x00_async_logio_timeout; + lio->ctx.done = qla2x00_async_logout_ctx_done; rval = qla2x00_start_sp(sp); if (rval != QLA_SUCCESS) goto done_free_sp; @@ -202,17 +225,17 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport, uint16_t *data) { int rval; - uint8_t opts = 0; switch (data[0]) { case MBS_COMMAND_COMPLETE: - if (fcport->flags & FCF_FCP2_DEVICE) - opts |= BIT_1; - rval = qla2x00_get_port_database(vha, fcport, opts); - if (rval != QLA_SUCCESS) - qla2x00_mark_device_lost(vha, fcport, 1, 0); - else - qla2x00_update_fcport(vha, fcport); + if (fcport->flags & FCF_FCP2_DEVICE) { + rval = qla2x00_get_port_database(vha, fcport, BIT_1); + if (rval != QLA_SUCCESS) { + qla2x00_mark_device_lost(vha, fcport, 1, 0); + break; + } + } + qla2x00_update_fcport(vha, fcport); break; case MBS_COMMAND_ERROR: if (data[1] & QLA_LOGIO_LOGIN_RETRIED) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index f1ac62d505d1..037bc41eef57 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -895,34 +895,20 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, { const char func[] = "MBX-IOCB"; const char *type; - struct qla_hw_data *ha = vha->hw; fc_port_t *fcport; srb_t *sp; struct srb_logio *lio; - uint16_t data[2]; + uint16_t *data; sp = qla2x00_get_sp_from_handle(vha, func, req, mbx); if (!sp) return; - type = NULL; lio = sp->ctx; - switch (lio->ctx.type) { - case SRB_LOGIN_CMD: - type = "login"; - break; - case SRB_LOGOUT_CMD: - type = "logout"; - break; - default: - qla_printk(KERN_WARNING, ha, - "%s: Unrecognized SRB: (%p) type=%d.\n", func, sp, - lio->ctx.type); - return; - } - del_timer(&lio->ctx.timer); + type = lio->ctx.name; fcport = sp->fcport; + data = lio->data; data[0] = data[1] = 0; if (mbx->entry_status) { @@ -938,7 +924,7 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, data[0] = MBS_COMMAND_ERROR; data[1] = lio->flags & SRB_LOGIN_RETRIED ? QLA_LOGIO_LOGIN_RETRIED: 0; - goto done_post_logio_done_work; + goto logio_done; } if (!mbx->status && le16_to_cpu(mbx->mb0) == MBS_COMMAND_COMPLETE) { @@ -948,10 +934,14 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, le16_to_cpu(mbx->mb1))); data[0] = MBS_COMMAND_COMPLETE; - if (lio->ctx.type == SRB_LOGIN_CMD && le16_to_cpu(mbx->mb1) & BIT_1) - fcport->flags |= FCF_FCP2_DEVICE; + if (lio->ctx.type == SRB_LOGIN_CMD) + fcport->port_type = FCT_TARGET; + if (le16_to_cpu(mbx->mb1) & BIT_0) + fcport->port_type = FCT_INITIATOR; + if (le16_to_cpu(mbx->mb1) & BIT_1) + fcport->flags |= FCF_FCP2_DEVICE; - goto done_post_logio_done_work; + goto logio_done; } data[0] = le16_to_cpu(mbx->mb0); @@ -976,12 +966,8 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, le16_to_cpu(mbx->mb2), le16_to_cpu(mbx->mb6), le16_to_cpu(mbx->mb7))); -done_post_logio_done_work: - lio->ctx.type == SRB_LOGIN_CMD ? - qla2x00_post_async_login_done_work(fcport->vha, fcport, data): - qla2x00_post_async_logout_done_work(fcport->vha, fcport, data); - - lio->ctx.free(sp); +logio_done: + lio->ctx.done(sp); } static void @@ -1084,35 +1070,21 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, { const char func[] = "LOGIO-IOCB"; const char *type; - struct qla_hw_data *ha = vha->hw; fc_port_t *fcport; srb_t *sp; struct srb_logio *lio; - uint16_t data[2]; + uint16_t *data; uint32_t iop[2]; sp = qla2x00_get_sp_from_handle(vha, func, req, logio); if (!sp) return; - type = NULL; lio = sp->ctx; - switch (lio->ctx.type) { - case SRB_LOGIN_CMD: - type = "login"; - break; - case SRB_LOGOUT_CMD: - type = "logout"; - break; - default: - qla_printk(KERN_WARNING, ha, - "%s: Unrecognized SRB: (%p) type=%d.\n", func, sp, - lio->ctx.type); - return; - } - del_timer(&lio->ctx.timer); + type = lio->ctx.name; fcport = sp->fcport; + data = lio->data; data[0] = data[1] = 0; if (logio->entry_status) { @@ -1125,7 +1097,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, data[0] = MBS_COMMAND_ERROR; data[1] = lio->flags & SRB_LOGIN_RETRIED ? QLA_LOGIO_LOGIN_RETRIED: 0; - goto done_post_logio_done_work; + goto logio_done; } if (le16_to_cpu(logio->comp_status) == CS_COMPLETE) { @@ -1136,7 +1108,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, data[0] = MBS_COMMAND_COMPLETE; if (lio->ctx.type == SRB_LOGOUT_CMD) - goto done_post_logio_done_work; + goto logio_done; iop[0] = le32_to_cpu(logio->io_parameter[0]); if (iop[0] & BIT_4) { @@ -1151,7 +1123,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, if (logio->io_parameter[9] || logio->io_parameter[10]) fcport->supported_classes |= FC_COS_CLASS3; - goto done_post_logio_done_work; + goto logio_done; } iop[0] = le32_to_cpu(logio->io_parameter[0]); @@ -1184,12 +1156,8 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, le32_to_cpu(logio->io_parameter[0]), le32_to_cpu(logio->io_parameter[1]))); -done_post_logio_done_work: - lio->ctx.type == SRB_LOGIN_CMD ? - qla2x00_post_async_login_done_work(fcport->vha, fcport, data): - qla2x00_post_async_logout_done_work(fcport->vha, fcport, data); - - lio->ctx.free(sp); +logio_done: + lio->ctx.done(sp); } /** -- cgit v1.2.2 From 5ff1d58410ffb160b388d622ef0c6a0411a05559 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 4 May 2010 15:01:26 -0700 Subject: [SCSI] qla2xxx: Limit mailbox command contention for ADISC requests. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 7 ++++ drivers/scsi/qla2xxx/qla_gbl.h | 8 ++++ drivers/scsi/qla2xxx/qla_init.c | 88 ++++++++++++++++++++++++++++++++++++++--- drivers/scsi/qla2xxx/qla_iocb.c | 39 +++++++++++++++++- drivers/scsi/qla2xxx/qla_isr.c | 33 ++++++++-------- drivers/scsi/qla2xxx/qla_os.c | 31 +++++++++++++-- 6 files changed, 178 insertions(+), 28 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index b3cf6099600b..a491338e1bfe 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -219,6 +219,7 @@ typedef struct srb { #define SRB_ELS_CMD_RPT 3 #define SRB_ELS_CMD_HST 4 #define SRB_CT_CMD 5 +#define SRB_ADISC_CMD 6 struct srb_ctx { uint16_t type; @@ -1623,6 +1624,7 @@ typedef struct fc_port { #define FCF_FABRIC_DEVICE BIT_0 #define FCF_LOGIN_NEEDED BIT_1 #define FCF_FCP2_DEVICE BIT_2 +#define FCF_ASYNC_SENT BIT_3 /* No loop ID flag. */ #define FC_NO_LOOP_ID 0x1000 @@ -2156,6 +2158,8 @@ enum qla_work_type { QLA_EVT_ASYNC_LOGIN_DONE, QLA_EVT_ASYNC_LOGOUT, QLA_EVT_ASYNC_LOGOUT_DONE, + QLA_EVT_ASYNC_ADISC, + QLA_EVT_ASYNC_ADISC_DONE, QLA_EVT_UEVENT, }; @@ -2514,6 +2518,9 @@ struct qla_hw_data { dma_addr_t ex_init_cb_dma; struct ex_init_cb_81xx *ex_init_cb; + void *async_pd; + dma_addr_t async_pd_dma; + /* These are used by mailbox operations. */ volatile uint16_t mailbox_out[MAILBOX_REGISTER_COUNT]; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index cff5a4ae7626..03be29841902 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -56,10 +56,14 @@ extern void qla84xx_put_chip(struct scsi_qla_host *); extern int qla2x00_async_login(struct scsi_qla_host *, fc_port_t *, uint16_t *); extern int qla2x00_async_logout(struct scsi_qla_host *, fc_port_t *); +extern int qla2x00_async_adisc(struct scsi_qla_host *, fc_port_t *, + uint16_t *); extern int qla2x00_async_login_done(struct scsi_qla_host *, fc_port_t *, uint16_t *); extern int qla2x00_async_logout_done(struct scsi_qla_host *, fc_port_t *, uint16_t *); +extern int qla2x00_async_adisc_done(struct scsi_qla_host *, fc_port_t *, + uint16_t *); extern fc_port_t * qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t ); @@ -97,6 +101,10 @@ extern int qla2x00_post_async_logout_work(struct scsi_qla_host *, fc_port_t *, uint16_t *); extern int qla2x00_post_async_logout_done_work(struct scsi_qla_host *, fc_port_t *, uint16_t *); +extern int qla2x00_post_async_adisc_work(struct scsi_qla_host *, fc_port_t *, + uint16_t *); +extern int qla2x00_post_async_adisc_done_work(struct scsi_qla_host *, + fc_port_t *, uint16_t *); extern int qla2x00_post_uevent_work(struct scsi_qla_host *, u32); extern int qla81xx_restart_mpi_firmware(scsi_qla_host_t *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index c3c2c3627a70..4e7a3d5493e6 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -119,6 +119,7 @@ qla2x00_async_logio_timeout(srb_t *sp) "scsi(%ld:%x): Async-%s timeout.\n", fcport->vha->host_no, sp->handle, lio->ctx.name)); + fcport->flags &= ~FCF_ASYNC_SENT; if (lio->ctx.type == SRB_LOGIN_CMD) qla2x00_post_async_logout_work(fcport->vha, fcport, NULL); } @@ -220,6 +221,56 @@ done: return rval; } +static void +qla2x00_async_adisc_ctx_done(srb_t *sp) +{ + struct srb_logio *lio = sp->ctx; + + qla2x00_post_async_adisc_done_work(sp->fcport->vha, sp->fcport, + lio->data); + lio->ctx.free(sp); +} + +int +qla2x00_async_adisc(struct scsi_qla_host *vha, fc_port_t *fcport, + uint16_t *data) +{ + struct qla_hw_data *ha = vha->hw; + srb_t *sp; + struct srb_logio *lio; + int rval; + + rval = QLA_FUNCTION_FAILED; + sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_logio), + ELS_TMO_2_RATOV(ha) + 2); + if (!sp) + goto done; + + lio = sp->ctx; + lio->ctx.type = SRB_ADISC_CMD; + lio->ctx.name = "adisc"; + lio->ctx.timeout = qla2x00_async_logio_timeout; + lio->ctx.done = qla2x00_async_adisc_ctx_done; + if (data[1] & QLA_LOGIO_LOGIN_RETRIED) + lio->flags |= SRB_LOGIN_RETRIED; + rval = qla2x00_start_sp(sp); + if (rval != QLA_SUCCESS) + goto done_free_sp; + + DEBUG2(printk(KERN_DEBUG + "scsi(%ld:%x): Async-adisc - loop-id=%x portid=%02x%02x%02x.\n", + fcport->vha->host_no, sp->handle, fcport->loop_id, + fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa)); + + return rval; + +done_free_sp: + del_timer_sync(&lio->ctx.timer); + lio->ctx.free(sp); +done: + return rval; +} + int qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport, uint16_t *data) @@ -229,15 +280,14 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport, switch (data[0]) { case MBS_COMMAND_COMPLETE: if (fcport->flags & FCF_FCP2_DEVICE) { - rval = qla2x00_get_port_database(vha, fcport, BIT_1); - if (rval != QLA_SUCCESS) { - qla2x00_mark_device_lost(vha, fcport, 1, 0); - break; - } + fcport->flags |= FCF_ASYNC_SENT; + qla2x00_post_async_adisc_work(vha, fcport, data); + break; } qla2x00_update_fcport(vha, fcport); break; case MBS_COMMAND_ERROR: + fcport->flags &= ~FCF_ASYNC_SENT; if (data[1] & QLA_LOGIO_LOGIN_RETRIED) set_bit(RELOGIN_NEEDED, &vha->dpc_flags); else @@ -251,6 +301,7 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport, fcport->loop_id++; rval = qla2x00_find_new_loop_id(vha, fcport); if (rval != QLA_SUCCESS) { + fcport->flags &= ~FCF_ASYNC_SENT; qla2x00_mark_device_lost(vha, fcport, 1, 0); break; } @@ -268,6 +319,26 @@ qla2x00_async_logout_done(struct scsi_qla_host *vha, fc_port_t *fcport, return QLA_SUCCESS; } +int +qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport, + uint16_t *data) +{ + if (data[0] == MBS_COMMAND_COMPLETE) { + qla2x00_update_fcport(vha, fcport); + + return QLA_SUCCESS; + } + + /* Retry login. */ + fcport->flags &= ~FCF_ASYNC_SENT; + if (data[1] & QLA_LOGIO_LOGIN_RETRIED) + set_bit(RELOGIN_NEEDED, &vha->dpc_flags); + else + qla2x00_mark_device_lost(vha, fcport, 1, 0); + + return QLA_SUCCESS; +} + /****************************************************************************/ /* QLogic ISP2x00 Hardware Support Functions. */ /****************************************************************************/ @@ -2062,6 +2133,7 @@ qla2x00_nvram_config(scsi_qla_host_t *vha) if (IS_QLA23XX(ha)) { nv->firmware_options[0] |= BIT_2; nv->firmware_options[0] &= ~BIT_3; + nv->firmware_options[0] &= ~BIT_6; nv->add_firmware_options[1] |= BIT_5 | BIT_4; if (IS_QLA2300(ha)) { @@ -2680,7 +2752,7 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) PORT_RETRY_TIME; atomic_set(&fcport->port_down_timer, ha->port_down_retry_count * PORT_RETRY_TIME); - fcport->flags &= ~FCF_LOGIN_NEEDED; + fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT); qla2x00_iidma_fcport(vha, fcport); @@ -3326,11 +3398,15 @@ qla2x00_fabric_dev_login(scsi_qla_host_t *vha, fc_port_t *fcport, retry = 0; if (IS_ALOGIO_CAPABLE(ha)) { + if (fcport->flags & FCF_ASYNC_SENT) + return rval; + fcport->flags |= FCF_ASYNC_SENT; rval = qla2x00_post_async_login_work(vha, fcport, NULL); if (!rval) return rval; } + fcport->flags &= ~FCF_ASYNC_SENT; rval = qla2x00_fabric_login(vha, fcport, next_loopid); if (rval == QLA_SUCCESS) { /* Send an ADISC to FCP2 devices.*/ diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index d792ae32ed69..8112e41065f2 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -1053,6 +1053,36 @@ qla2x00_logout_iocb(srb_t *sp, struct mbx_entry *mbx) /* Implicit: mbx->mbx10 = 0. */ } +static void +qla24xx_adisc_iocb(srb_t *sp, struct logio_entry_24xx *logio) +{ + logio->entry_type = LOGINOUT_PORT_IOCB_TYPE; + logio->control_flags = cpu_to_le16(LCF_COMMAND_ADISC); + logio->nport_handle = cpu_to_le16(sp->fcport->loop_id); + logio->vp_index = sp->fcport->vp_idx; +} + +static void +qla2x00_adisc_iocb(srb_t *sp, struct mbx_entry *mbx) +{ + struct qla_hw_data *ha = sp->fcport->vha->hw; + + mbx->entry_type = MBX_IOCB_TYPE; + SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id); + mbx->mb0 = cpu_to_le16(MBC_GET_PORT_DATABASE); + if (HAS_EXTENDED_IDS(ha)) { + mbx->mb1 = cpu_to_le16(sp->fcport->loop_id); + mbx->mb10 = cpu_to_le16(BIT_0); + } else { + mbx->mb1 = cpu_to_le16((sp->fcport->loop_id << 8) | BIT_0); + } + mbx->mb2 = cpu_to_le16(MSW(ha->async_pd_dma)); + mbx->mb3 = cpu_to_le16(LSW(ha->async_pd_dma)); + mbx->mb6 = cpu_to_le16(MSW(MSD(ha->async_pd_dma))); + mbx->mb7 = cpu_to_le16(LSW(MSD(ha->async_pd_dma))); + mbx->mb9 = cpu_to_le16(sp->fcport->vp_idx); +} + static void qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb) { @@ -1185,12 +1215,12 @@ qla2x00_start_sp(srb_t *sp) switch (ctx->type) { case SRB_LOGIN_CMD: IS_FWI2_CAPABLE(ha) ? - qla24xx_login_iocb(sp, pkt): + qla24xx_login_iocb(sp, pkt) : qla2x00_login_iocb(sp, pkt); break; case SRB_LOGOUT_CMD: IS_FWI2_CAPABLE(ha) ? - qla24xx_logout_iocb(sp, pkt): + qla24xx_logout_iocb(sp, pkt) : qla2x00_logout_iocb(sp, pkt); break; case SRB_ELS_CMD_RPT: @@ -1200,6 +1230,11 @@ qla2x00_start_sp(srb_t *sp) case SRB_CT_CMD: qla24xx_ct_iocb(sp, pkt); break; + case SRB_ADISC_CMD: + IS_FWI2_CAPABLE(ha) ? + qla24xx_adisc_iocb(sp, pkt) : + qla2x00_adisc_iocb(sp, pkt); + break; default: break; } diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 037bc41eef57..a1968eb5e9ce 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -899,6 +899,7 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, srb_t *sp; struct srb_logio *lio; uint16_t *data; + uint16_t status; sp = qla2x00_get_sp_from_handle(vha, func, req, mbx); if (!sp) @@ -910,7 +911,9 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, fcport = sp->fcport; data = lio->data; - data[0] = data[1] = 0; + data[0] = MBS_COMMAND_ERROR; + data[1] = lio->flags & SRB_LOGIN_RETRIED ? + QLA_LOGIO_LOGIN_RETRIED : 0; if (mbx->entry_status) { DEBUG2(printk(KERN_WARNING "scsi(%ld:%x): Async-%s error entry - entry-status=%x " @@ -921,26 +924,27 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, le16_to_cpu(mbx->status_flags))); DEBUG2(qla2x00_dump_buffer((uint8_t *)mbx, sizeof(*mbx))); - data[0] = MBS_COMMAND_ERROR; - data[1] = lio->flags & SRB_LOGIN_RETRIED ? - QLA_LOGIO_LOGIN_RETRIED: 0; goto logio_done; } - if (!mbx->status && le16_to_cpu(mbx->mb0) == MBS_COMMAND_COMPLETE) { + status = le16_to_cpu(mbx->status); + if (status == 0x30 && lio->ctx.type == SRB_LOGIN_CMD && + le16_to_cpu(mbx->mb0) == MBS_COMMAND_COMPLETE) + status = 0; + if (!status && le16_to_cpu(mbx->mb0) == MBS_COMMAND_COMPLETE) { DEBUG2(printk(KERN_DEBUG "scsi(%ld:%x): Async-%s complete - mbx1=%x.\n", fcport->vha->host_no, sp->handle, type, le16_to_cpu(mbx->mb1))); data[0] = MBS_COMMAND_COMPLETE; - if (lio->ctx.type == SRB_LOGIN_CMD) + if (lio->ctx.type == SRB_LOGIN_CMD) { fcport->port_type = FCT_TARGET; if (le16_to_cpu(mbx->mb1) & BIT_0) fcport->port_type = FCT_INITIATOR; if (le16_to_cpu(mbx->mb1) & BIT_1) fcport->flags |= FCF_FCP2_DEVICE; - + } goto logio_done; } @@ -953,15 +957,13 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, break; default: data[0] = MBS_COMMAND_ERROR; - data[1] = lio->flags & SRB_LOGIN_RETRIED ? - QLA_LOGIO_LOGIN_RETRIED: 0; break; } DEBUG2(printk(KERN_WARNING "scsi(%ld:%x): Async-%s failed - status=%x mb0=%x mb1=%x mb2=%x " "mb6=%x mb7=%x.\n", - fcport->vha->host_no, sp->handle, type, le16_to_cpu(mbx->status), + fcport->vha->host_no, sp->handle, type, status, le16_to_cpu(mbx->mb0), le16_to_cpu(mbx->mb1), le16_to_cpu(mbx->mb2), le16_to_cpu(mbx->mb6), le16_to_cpu(mbx->mb7))); @@ -1086,7 +1088,9 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, fcport = sp->fcport; data = lio->data; - data[0] = data[1] = 0; + data[0] = MBS_COMMAND_ERROR; + data[1] = lio->flags & SRB_LOGIN_RETRIED ? + QLA_LOGIO_LOGIN_RETRIED : 0; if (logio->entry_status) { DEBUG2(printk(KERN_WARNING "scsi(%ld:%x): Async-%s error entry - entry-status=%x.\n", @@ -1094,9 +1098,6 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, logio->entry_status)); DEBUG2(qla2x00_dump_buffer((uint8_t *)logio, sizeof(*logio))); - data[0] = MBS_COMMAND_ERROR; - data[1] = lio->flags & SRB_LOGIN_RETRIED ? - QLA_LOGIO_LOGIN_RETRIED: 0; goto logio_done; } @@ -1107,7 +1108,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, le32_to_cpu(logio->io_parameter[0]))); data[0] = MBS_COMMAND_COMPLETE; - if (lio->ctx.type == SRB_LOGOUT_CMD) + if (lio->ctx.type != SRB_LOGIN_CMD) goto logio_done; iop[0] = le32_to_cpu(logio->io_parameter[0]); @@ -1144,8 +1145,6 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, /* Fall through. */ default: data[0] = MBS_COMMAND_ERROR; - data[1] = lio->flags & SRB_LOGIN_RETRIED ? - QLA_LOGIO_LOGIN_RETRIED: 0; break; } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 10c14af2235b..2e083c0d9215 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2639,9 +2639,19 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, INIT_LIST_HEAD(&ha->gbl_dsd_list); + /* Get consistent memory allocated for Async Port-Database. */ + if (!IS_FWI2_CAPABLE(ha)) { + ha->async_pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, + &ha->async_pd_dma); + if (!ha->async_pd) + goto fail_async_pd; + } + INIT_LIST_HEAD(&ha->vp_list); return 1; +fail_async_pd: + dma_pool_free(ha->s_dma_pool, ha->ex_init_cb, ha->ex_init_cb_dma); fail_ex_init_cb: kfree(ha->npiv_info); fail_npiv_info: @@ -2757,6 +2767,9 @@ qla2x00_mem_free(struct qla_hw_data *ha) dma_pool_free(ha->s_dma_pool, ha->ex_init_cb, ha->ex_init_cb_dma); + if (ha->async_pd) + dma_pool_free(ha->s_dma_pool, ha->async_pd, ha->async_pd_dma); + if (ha->s_dma_pool) dma_pool_destroy(ha->s_dma_pool); @@ -2809,6 +2822,8 @@ qla2x00_mem_free(struct qla_hw_data *ha) ha->init_cb_dma = 0; ha->ex_init_cb = NULL; ha->ex_init_cb_dma = 0; + ha->async_pd = NULL; + ha->async_pd_dma = 0; ha->s_dma_pool = NULL; ha->dl_dma_pool = NULL; @@ -2935,6 +2950,8 @@ qla2x00_post_async_work(login, QLA_EVT_ASYNC_LOGIN); qla2x00_post_async_work(login_done, QLA_EVT_ASYNC_LOGIN_DONE); qla2x00_post_async_work(logout, QLA_EVT_ASYNC_LOGOUT); qla2x00_post_async_work(logout_done, QLA_EVT_ASYNC_LOGOUT_DONE); +qla2x00_post_async_work(adisc, QLA_EVT_ASYNC_ADISC); +qla2x00_post_async_work(adisc_done, QLA_EVT_ASYNC_ADISC_DONE); int qla2x00_post_uevent_work(struct scsi_qla_host *vha, u32 code) @@ -3004,6 +3021,14 @@ qla2x00_do_work(struct scsi_qla_host *vha) qla2x00_async_logout_done(vha, e->u.logio.fcport, e->u.logio.data); break; + case QLA_EVT_ASYNC_ADISC: + qla2x00_async_adisc(vha, e->u.logio.fcport, + e->u.logio.data); + break; + case QLA_EVT_ASYNC_ADISC_DONE: + qla2x00_async_adisc_done(vha, e->u.logio.fcport, + e->u.logio.data); + break; case QLA_EVT_UEVENT: qla2x00_uevent_emit(vha, e->u.uevent.code); break; @@ -3029,9 +3054,8 @@ void qla2x00_relogin(struct scsi_qla_host *vha) * If the port is not ONLINE then try to login * to it if we haven't run out of retries. */ - if (atomic_read(&fcport->state) != - FCS_ONLINE && fcport->login_retry) { - + if (atomic_read(&fcport->state) != FCS_ONLINE && + fcport->login_retry && !(fcport->flags & FCF_ASYNC_SENT)) { fcport->login_retry--; if (fcport->flags & FCF_FABRIC_DEVICE) { if (fcport->flags & FCF_FCP2_DEVICE) @@ -3042,6 +3066,7 @@ void qla2x00_relogin(struct scsi_qla_host *vha) fcport->d_id.b.al_pa); if (IS_ALOGIO_CAPABLE(ha)) { + fcport->flags |= FCF_ASYNC_SENT; data[0] = 0; data[1] = QLA_LOGIO_LOGIN_RETRIED; status = qla2x00_post_async_login_work( -- cgit v1.2.2 From b7d2280c153b33fc60f1a89406d2329137a8b61c Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 4 May 2010 15:01:27 -0700 Subject: [SCSI] qla2xxx: Cleanup FCP-command-status processing debug statements. Migrate to a consistent set of debug entries during status-IOCB handling: * group CS_TIMEOUT handling with CS_PORT_UNAVAILABLE and the like (more regrouping of common behaviour). * drop CS_DATA_OVERRUN handling as it now falls into the 'default' case (still returns DID_ERROR). * consolidate CS_RESET and CS_ABORTED handling, as we the only functional difference was a printk() (still returns DID_RESET). * dropped all the earlier inconsistent [qla_]printk()s sprinkled throught the needlessly large case-statement. Failure case I/Os are now logged with a 'standard' format: so, for example a dropped-frame is logged as: qla2xxx 0000:13:00.0: scsi(16:0:0) Dropped frame(s) detected (4000 of 4000 bytes). qla2xxx 0000:13:00.0: scsi(16:0:0) FCP command status: 0x15-0x18 (70018) \ oxid=78 ser=76 cdb=280000 len=4000 rsp_info=0 resid=0 fw_resid=4000 which should now convey all relevant information. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 192 ++++++++++++++--------------------------- 1 file changed, 63 insertions(+), 129 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index a1968eb5e9ce..b92f9a6ee4fb 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1283,6 +1283,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) struct sts_entry_24xx *sts24; uint16_t comp_status; uint16_t scsi_status; + uint16_t ox_id; uint8_t lscsi_status; int32_t resid; uint32_t sense_len, rsp_info_len, resid_len, fw_resid_len; @@ -1291,6 +1292,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) uint32_t handle; uint16_t que; struct req_que *req; + int logit = 1; sts = (sts_entry_t *) pkt; sts24 = (struct sts_entry_24xx *) pkt; @@ -1320,9 +1322,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) sp = NULL; if (sp == NULL) { - DEBUG2(printk("scsi(%ld): Status Entry invalid handle.\n", - vha->host_no)); - qla_printk(KERN_WARNING, ha, "Status Entry invalid handle.\n"); + qla_printk(KERN_WARNING, ha, + "scsi(%ld): Invalid status handle (0x%x).\n", vha->host_no, + sts->handle); set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); qla2xxx_wake_dpc(vha); @@ -1330,10 +1332,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) } cp = sp->cmd; if (cp == NULL) { - DEBUG2(printk("scsi(%ld): Command already returned back to OS " - "pkt->handle=%d sp=%p.\n", vha->host_no, handle, sp)); qla_printk(KERN_WARNING, ha, - "Command is NULL: already returned to OS (sp=%p)\n", sp); + "scsi(%ld): Command already returned (0x%x/%p).\n", + vha->host_no, sts->handle, sp); return; } @@ -1342,6 +1343,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) fcport = sp->fcport; + ox_id = 0; sense_len = rsp_info_len = resid_len = fw_resid_len = 0; if (IS_FWI2_CAPABLE(ha)) { if (scsi_status & SS_SENSE_LEN_VALID) @@ -1355,6 +1357,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) rsp_info = sts24->data; sense_data = sts24->data; host_to_fcp_swap(sts24->data, sizeof(sts24->data)); + ox_id = le16_to_cpu(sts24->ox_id); } else { if (scsi_status & SS_SENSE_LEN_VALID) sense_len = le16_to_cpu(sts->req_sense_length); @@ -1371,17 +1374,13 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) if (IS_FWI2_CAPABLE(ha)) sense_data += rsp_info_len; if (rsp_info_len > 3 && rsp_info[3]) { - DEBUG2(printk("scsi(%ld:%d:%d:%d) FCP I/O protocol " - "failure (%x/%02x%02x%02x%02x%02x%02x%02x%02x)..." - "retrying command\n", vha->host_no, - cp->device->channel, cp->device->id, - cp->device->lun, rsp_info_len, rsp_info[0], - rsp_info[1], rsp_info[2], rsp_info[3], rsp_info[4], - rsp_info[5], rsp_info[6], rsp_info[7])); + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d): FCP I/O protocol failure " + "(0x%x/0x%x).\n", vha->host_no, cp->device->id, + cp->device->lun, rsp_info_len, rsp_info[3])); cp->result = DID_BUS_BUSY << 16; - qla2x00_sp_compl(ha, sp); - return; + goto out; } } @@ -1408,12 +1407,10 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) ((unsigned)(scsi_bufflen(cp) - resid) < cp->underflow)) { qla_printk(KERN_INFO, ha, - "scsi(%ld:%d:%d:%d): Mid-layer underflow " - "detected (%x of %x bytes)...returning " - "error status.\n", vha->host_no, - cp->device->channel, cp->device->id, - cp->device->lun, resid, - scsi_bufflen(cp)); + "scsi(%ld:%d:%d): Mid-layer underflow " + "detected (0x%x of 0x%x bytes).\n", + vha->host_no, cp->device->id, + cp->device->lun, resid, scsi_bufflen(cp)); cp->result = DID_ERROR << 16; break; @@ -1422,12 +1419,12 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) cp->result = DID_OK << 16 | lscsi_status; if (lscsi_status == SAM_STAT_TASK_SET_FULL) { - DEBUG2(printk(KERN_INFO - "scsi(%ld): QUEUE FULL status detected " - "0x%x-0x%x.\n", vha->host_no, comp_status, - scsi_status)); + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) QUEUE FULL detected.\n", + vha->host_no, cp->device->id, cp->device->lun)); break; } + logit = 0; if (lscsi_status != SS_CHECK_CONDITION) break; @@ -1439,23 +1436,14 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) break; case CS_DATA_UNDERRUN: - DEBUG2(printk(KERN_INFO - "scsi(%ld:%d:%d) UNDERRUN status detected 0x%x-0x%x. " - "resid=0x%x fw_resid=0x%x cdb=0x%x os_underflow=0x%x\n", - vha->host_no, cp->device->id, cp->device->lun, comp_status, - scsi_status, resid_len, fw_resid_len, cp->cmnd[0], - cp->underflow)); - /* Use F/W calculated residual length. */ resid = IS_FWI2_CAPABLE(ha) ? fw_resid_len : resid_len; scsi_set_resid(cp, resid); if (scsi_status & SS_RESIDUAL_UNDER) { if (IS_FWI2_CAPABLE(ha) && fw_resid_len != resid_len) { - DEBUG2(printk( - "scsi(%ld:%d:%d:%d) Dropped frame(s) " - "detected (%x of %x bytes)...residual " - "length mismatch...retrying command.\n", - vha->host_no, cp->device->channel, + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) Dropped frame(s) detected " + "(0x%x of 0x%x bytes).\n", vha->host_no, cp->device->id, cp->device->lun, resid, scsi_bufflen(cp))); @@ -1467,21 +1455,18 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) ((unsigned)(scsi_bufflen(cp) - resid) < cp->underflow)) { qla_printk(KERN_INFO, ha, - "scsi(%ld:%d:%d:%d): Mid-layer underflow " - "detected (%x of %x bytes)...returning " - "error status.\n", vha->host_no, - cp->device->channel, cp->device->id, + "scsi(%ld:%d:%d): Mid-layer underflow " + "detected (0x%x of 0x%x bytes).\n", + vha->host_no, cp->device->id, cp->device->lun, resid, scsi_bufflen(cp)); cp->result = DID_ERROR << 16; break; } } else if (!lscsi_status) { - DEBUG2(printk( - "scsi(%ld:%d:%d:%d) Dropped frame(s) detected " - "(%x of %x bytes)...firmware reported underrun..." - "retrying command.\n", vha->host_no, - cp->device->channel, cp->device->id, + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) Dropped frame(s) detected (0x%x " + "of 0x%x bytes).\n", vha->host_no, cp->device->id, cp->device->lun, resid, scsi_bufflen(cp))); cp->result = DID_ERROR << 16; @@ -1489,6 +1474,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) } cp->result = DID_OK << 16 | lscsi_status; + logit = 0; /* * Check to see if SCSI Status is non zero. If so report SCSI @@ -1496,10 +1482,11 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) */ if (lscsi_status != 0) { if (lscsi_status == SAM_STAT_TASK_SET_FULL) { - DEBUG2(printk(KERN_INFO - "scsi(%ld): QUEUE FULL status detected " - "0x%x-0x%x.\n", vha->host_no, comp_status, - scsi_status)); + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) QUEUE FULL detected.\n", + vha->host_no, cp->device->id, + cp->device->lun)); + logit = 1; break; } if (lscsi_status != SS_CHECK_CONDITION) @@ -1513,109 +1500,56 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) } break; - case CS_DATA_OVERRUN: - DEBUG2(printk(KERN_INFO - "scsi(%ld:%d:%d): OVERRUN status detected 0x%x-0x%x\n", - vha->host_no, cp->device->id, cp->device->lun, comp_status, - scsi_status)); - DEBUG2(printk(KERN_INFO - "CDB: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", - cp->cmnd[0], cp->cmnd[1], cp->cmnd[2], cp->cmnd[3], - cp->cmnd[4], cp->cmnd[5])); - DEBUG2(printk(KERN_INFO - "PID=0x%lx req=0x%x xtra=0x%x -- returning DID_ERROR " - "status!\n", - cp->serial_number, scsi_bufflen(cp), resid_len)); - - cp->result = DID_ERROR << 16; - break; - case CS_PORT_LOGGED_OUT: case CS_PORT_CONFIG_CHG: case CS_PORT_BUSY: case CS_INCOMPLETE: case CS_PORT_UNAVAILABLE: - /* - * If the port is in Target Down state, return all IOs for this - * Target with DID_NO_CONNECT ELSE Queue the IOs in the - * retry_queue. - */ - DEBUG2(printk("scsi(%ld:%d:%d): status_entry: Port Down " - "pid=%ld, compl status=0x%x, port state=0x%x\n", - vha->host_no, cp->device->id, cp->device->lun, - cp->serial_number, comp_status, - atomic_read(&fcport->state))); - + case CS_TIMEOUT: /* * We are going to have the fc class block the rport * while we try to recover so instruct the mid layer * to requeue until the class decides how to handle this. */ cp->result = DID_TRANSPORT_DISRUPTED << 16; + + if (comp_status == CS_TIMEOUT) { + if (IS_FWI2_CAPABLE(ha)) + break; + else if ((le16_to_cpu(sts->status_flags) & + SF_LOGOUT_SENT) == 0) + break; + } + + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) Port down status: port-state=0x%x\n", + vha->host_no, cp->device->id, cp->device->lun, + atomic_read(&fcport->state))); + if (atomic_read(&fcport->state) == FCS_ONLINE) qla2x00_mark_device_lost(fcport->vha, fcport, 1, 1); break; case CS_RESET: - DEBUG2(printk(KERN_INFO - "scsi(%ld): RESET status detected 0x%x-0x%x.\n", - vha->host_no, comp_status, scsi_status)); - - cp->result = DID_RESET << 16; - break; - case CS_ABORTED: - /* - * hv2.19.12 - DID_ABORT does not retry the request if we - * aborted this request then abort otherwise it must be a - * reset. - */ - DEBUG2(printk(KERN_INFO - "scsi(%ld): ABORT status detected 0x%x-0x%x.\n", - vha->host_no, comp_status, scsi_status)); - cp->result = DID_RESET << 16; break; - - case CS_TIMEOUT: - /* - * We are going to have the fc class block the rport - * while we try to recover so instruct the mid layer - * to requeue until the class decides how to handle this. - */ - cp->result = DID_TRANSPORT_DISRUPTED << 16; - - if (IS_FWI2_CAPABLE(ha)) { - DEBUG2(printk(KERN_INFO - "scsi(%ld:%d:%d:%d): TIMEOUT status detected " - "0x%x-0x%x\n", vha->host_no, cp->device->channel, - cp->device->id, cp->device->lun, comp_status, - scsi_status)); - break; - } - DEBUG2(printk(KERN_INFO - "scsi(%ld:%d:%d:%d): TIMEOUT status detected 0x%x-0x%x " - "sflags=%x.\n", vha->host_no, cp->device->channel, - cp->device->id, cp->device->lun, comp_status, scsi_status, - le16_to_cpu(sts->status_flags))); - - /* Check to see if logout occurred. */ - if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT)) - qla2x00_mark_device_lost(fcport->vha, fcport, 1, 1); - break; - default: - DEBUG3(printk("scsi(%ld): Error detected (unknown status) " - "0x%x-0x%x.\n", vha->host_no, comp_status, scsi_status)); - qla_printk(KERN_INFO, ha, - "Unknown status detected 0x%x-0x%x.\n", - comp_status, scsi_status); - cp->result = DID_ERROR << 16; break; } - /* Place command on done queue. */ +out: + if (logit) + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld:%d:%d) FCP command status: 0x%x-0x%x (0x%x) " + "oxid=0x%x ser=0x%lx cdb=%02x%02x%02x len=0x%x " + "rsp_info=0x%x resid=0x%x fw_resid=0x%x\n", vha->host_no, + cp->device->id, cp->device->lun, comp_status, scsi_status, + cp->result, ox_id, cp->serial_number, cp->cmnd[0], + cp->cmnd[1], cp->cmnd[2], scsi_bufflen(cp), rsp_info_len, + resid_len, fw_resid_len)); + if (rsp->status_srb == NULL) qla2x00_sp_compl(ha, sp); } -- cgit v1.2.2 From 4916392b56921b4aaaeaca3ef492135f42fbb5f2 Mon Sep 17 00:00:00 2001 From: Madhuranath Iyengar Date: Tue, 4 May 2010 15:01:28 -0700 Subject: [SCSI] qla2xxx: Provide common framework for BSG and IOCB commands. Currently, BSG and IOCB/Logio commands have a different framework (srb structs). The purpose of this effort is to consolidate them into a generalized framework for these as well as other asynchronous operations in the future. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_bsg.c | 28 ++++----- drivers/scsi/qla2xxx/qla_def.h | 48 +++++++------- drivers/scsi/qla2xxx/qla_gbl.h | 6 +- drivers/scsi/qla2xxx/qla_init.c | 135 +++++++++++++++++++++++----------------- drivers/scsi/qla2xxx/qla_iocb.c | 24 ++++--- drivers/scsi/qla2xxx/qla_isr.c | 50 ++++++++------- drivers/scsi/qla2xxx/qla_os.c | 13 ++-- 7 files changed, 162 insertions(+), 142 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 21e5bcd4bb51..951db816ee45 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -16,7 +16,7 @@ qla2x00_get_ctx_bsg_sp(scsi_qla_host_t *vha, fc_port_t *fcport, size_t size) { srb_t *sp; struct qla_hw_data *ha = vha->hw; - struct srb_bsg_ctx *ctx; + struct srb_ctx *ctx; sp = mempool_alloc(ha->srb_mempool, GFP_KERNEL); if (!sp) @@ -208,7 +208,7 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job) int req_sg_cnt, rsp_sg_cnt; int rval = (DRIVER_ERROR << 16); uint16_t nextlid = 0; - struct srb_bsg *els; + struct srb_ctx *els; /* Multiple SG's are not supported for ELS requests */ if (bsg_job->request_payload.sg_cnt > 1 || @@ -307,17 +307,17 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job) } /* Alloc SRB structure */ - sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_bsg)); + sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_ctx)); if (!sp) { rval = -ENOMEM; goto done_unmap_sg; } els = sp->ctx; - els->ctx.type = + els->type = (bsg_job->request->msgcode == FC_BSG_RPT_ELS ? SRB_ELS_CMD_RPT : SRB_ELS_CMD_HST); - els->bsg_job = bsg_job; + els->u.bsg_job = bsg_job; DEBUG2(qla_printk(KERN_INFO, ha, "scsi(%ld:%x): bsg rqst type: %s els type: %x - loop-id=%x " @@ -361,7 +361,7 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) uint16_t loop_id; struct fc_port *fcport; char *type = "FC_BSG_HST_CT"; - struct srb_bsg *ct; + struct srb_ctx *ct; /* pass through is supported only for ISP 4Gb or higher */ if (!IS_FWI2_CAPABLE(ha)) { @@ -442,15 +442,15 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) fcport->loop_id = loop_id; /* Alloc SRB structure */ - sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_bsg)); + sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_ctx)); if (!sp) { rval = -ENOMEM; goto done_free_fcport; } ct = sp->ctx; - ct->ctx.type = SRB_CT_CMD; - ct->bsg_job = bsg_job; + ct->type = SRB_CT_CMD; + ct->u.bsg_job = bsg_job; DEBUG2(qla_printk(KERN_INFO, ha, "scsi(%ld:%x): bsg rqst type: %s els type: %x - loop-id=%x " @@ -1155,7 +1155,7 @@ qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job) int cnt, que; unsigned long flags; struct req_que *req; - struct srb_bsg *sp_bsg; + struct srb_ctx *sp_bsg; /* find the bsg job from the active list of commands */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -1167,11 +1167,11 @@ qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job) for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { sp = req->outstanding_cmds[cnt]; if (sp) { - sp_bsg = (struct srb_bsg *)sp->ctx; + sp_bsg = sp->ctx; - if (((sp_bsg->ctx.type == SRB_CT_CMD) || - (sp_bsg->ctx.type == SRB_ELS_CMD_HST)) - && (sp_bsg->bsg_job == bsg_job)) { + if (((sp_bsg->type == SRB_CT_CMD) || + (sp_bsg->type == SRB_ELS_CMD_HST)) + && (sp_bsg->u.bsg_job == bsg_job)) { if (ha->isp_ops->abort_command(sp)) { DEBUG2(qla_printk(KERN_INFO, ha, "scsi(%ld): mbx " diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index a491338e1bfe..08f5fd5359dd 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -214,16 +214,16 @@ typedef struct srb { /* * SRB extensions. */ -#define SRB_LOGIN_CMD 1 -#define SRB_LOGOUT_CMD 2 -#define SRB_ELS_CMD_RPT 3 -#define SRB_ELS_CMD_HST 4 -#define SRB_CT_CMD 5 -#define SRB_ADISC_CMD 6 - -struct srb_ctx { - uint16_t type; - char *name; +struct srb_iocb { + union { + struct { + uint16_t flags; +#define SRB_LOGIN_RETRIED BIT_0 +#define SRB_LOGIN_COND_PLOGI BIT_1 +#define SRB_LOGIN_SKIP_PRLI BIT_2 + uint16_t data[2]; + } logio; + } u; struct timer_list timer; @@ -232,23 +232,21 @@ struct srb_ctx { void (*timeout)(srb_t *); }; -struct srb_logio { - struct srb_ctx ctx; - -#define SRB_LOGIN_RETRIED BIT_0 -#define SRB_LOGIN_COND_PLOGI BIT_1 -#define SRB_LOGIN_SKIP_PRLI BIT_2 - uint16_t flags; - uint16_t data[2]; -}; +/* Values for srb_ctx type */ +#define SRB_LOGIN_CMD 1 +#define SRB_LOGOUT_CMD 2 +#define SRB_ELS_CMD_RPT 3 +#define SRB_ELS_CMD_HST 4 +#define SRB_CT_CMD 5 +#define SRB_ADISC_CMD 6 -struct srb_bsg_ctx { +struct srb_ctx { uint16_t type; -}; - -struct srb_bsg { - struct srb_bsg_ctx ctx; - struct fc_bsg_job *bsg_job; + char *name; + union { + struct srb_iocb *iocb_cmd; + struct fc_bsg_job *bsg_job; + } u; }; struct msg_echo_lb { diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 03be29841902..408e5f0a53c1 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -58,11 +58,11 @@ extern int qla2x00_async_login(struct scsi_qla_host *, fc_port_t *, extern int qla2x00_async_logout(struct scsi_qla_host *, fc_port_t *); extern int qla2x00_async_adisc(struct scsi_qla_host *, fc_port_t *, uint16_t *); -extern int qla2x00_async_login_done(struct scsi_qla_host *, fc_port_t *, +extern void qla2x00_async_login_done(struct scsi_qla_host *, fc_port_t *, uint16_t *); -extern int qla2x00_async_logout_done(struct scsi_qla_host *, fc_port_t *, +extern void qla2x00_async_logout_done(struct scsi_qla_host *, fc_port_t *, uint16_t *); -extern int qla2x00_async_adisc_done(struct scsi_qla_host *, fc_port_t *, +extern void qla2x00_async_adisc_done(struct scsi_qla_host *, fc_port_t *, uint16_t *); extern fc_port_t * diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 4e7a3d5493e6..72b4ef270158 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -48,6 +48,7 @@ qla2x00_ctx_sp_timeout(unsigned long __data) { srb_t *sp = (srb_t *)__data; struct srb_ctx *ctx; + struct srb_iocb *iocb; fc_port_t *fcport = sp->fcport; struct qla_hw_data *ha = fcport->vha->hw; struct req_que *req; @@ -57,17 +58,21 @@ qla2x00_ctx_sp_timeout(unsigned long __data) req = ha->req_q_map[0]; req->outstanding_cmds[sp->handle] = NULL; ctx = sp->ctx; - ctx->timeout(sp); + iocb = ctx->u.iocb_cmd; + iocb->timeout(sp); spin_unlock_irqrestore(&ha->hardware_lock, flags); - ctx->free(sp); + iocb->free(sp); } void qla2x00_ctx_sp_free(srb_t *sp) { struct srb_ctx *ctx = sp->ctx; + struct srb_iocb *iocb = ctx->u.iocb_cmd; + del_timer_sync(&iocb->timer); + kfree(iocb); kfree(ctx); mempool_free(sp, sp->fcport->vha->hw->srb_mempool); } @@ -79,6 +84,7 @@ qla2x00_get_ctx_sp(scsi_qla_host_t *vha, fc_port_t *fcport, size_t size, srb_t *sp; struct qla_hw_data *ha = vha->hw; struct srb_ctx *ctx; + struct srb_iocb *iocb; sp = mempool_alloc(ha->srb_mempool, GFP_KERNEL); if (!sp) @@ -86,21 +92,30 @@ qla2x00_get_ctx_sp(scsi_qla_host_t *vha, fc_port_t *fcport, size_t size, ctx = kzalloc(size, GFP_KERNEL); if (!ctx) { mempool_free(sp, ha->srb_mempool); + sp = NULL; + goto done; + } + iocb = kzalloc(sizeof(struct srb_iocb), GFP_KERNEL); + if (!iocb) { + mempool_free(sp, ha->srb_mempool); + sp = NULL; + kfree(ctx); goto done; } memset(sp, 0, sizeof(*sp)); sp->fcport = fcport; sp->ctx = ctx; - ctx->free = qla2x00_ctx_sp_free; + ctx->u.iocb_cmd = iocb; + iocb->free = qla2x00_ctx_sp_free; - init_timer(&ctx->timer); + init_timer(&iocb->timer); if (!tmo) goto done; - ctx->timer.expires = jiffies + tmo * HZ; - ctx->timer.data = (unsigned long)sp; - ctx->timer.function = qla2x00_ctx_sp_timeout; - add_timer(&ctx->timer); + iocb->timer.expires = jiffies + tmo * HZ; + iocb->timer.data = (unsigned long)sp; + iocb->timer.function = qla2x00_ctx_sp_timeout; + add_timer(&iocb->timer); done: return sp; } @@ -113,25 +128,26 @@ static void qla2x00_async_logio_timeout(srb_t *sp) { fc_port_t *fcport = sp->fcport; - struct srb_logio *lio = sp->ctx; + struct srb_ctx *ctx = sp->ctx; DEBUG2(printk(KERN_WARNING "scsi(%ld:%x): Async-%s timeout.\n", - fcport->vha->host_no, sp->handle, lio->ctx.name)); + fcport->vha->host_no, sp->handle, ctx->name)); fcport->flags &= ~FCF_ASYNC_SENT; - if (lio->ctx.type == SRB_LOGIN_CMD) + if (ctx->type == SRB_LOGIN_CMD) qla2x00_post_async_logout_work(fcport->vha, fcport, NULL); } static void qla2x00_async_login_ctx_done(srb_t *sp) { - struct srb_logio *lio = sp->ctx; + struct srb_ctx *ctx = sp->ctx; + struct srb_iocb *lio = ctx->u.iocb_cmd; qla2x00_post_async_login_done_work(sp->fcport->vha, sp->fcport, - lio->data); - lio->ctx.free(sp); + lio->u.logio.data); + lio->free(sp); } int @@ -140,23 +156,25 @@ qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport, { struct qla_hw_data *ha = vha->hw; srb_t *sp; - struct srb_logio *lio; + struct srb_ctx *ctx; + struct srb_iocb *lio; int rval; rval = QLA_FUNCTION_FAILED; - sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_logio), + sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), ELS_TMO_2_RATOV(ha) + 2); if (!sp) goto done; - lio = sp->ctx; - lio->ctx.type = SRB_LOGIN_CMD; - lio->ctx.name = "login"; - lio->ctx.timeout = qla2x00_async_logio_timeout; - lio->ctx.done = qla2x00_async_login_ctx_done; - lio->flags |= SRB_LOGIN_COND_PLOGI; + ctx = sp->ctx; + ctx->type = SRB_LOGIN_CMD; + ctx->name = "login"; + lio = ctx->u.iocb_cmd; + lio->timeout = qla2x00_async_logio_timeout; + lio->done = qla2x00_async_login_ctx_done; + lio->u.logio.flags |= SRB_LOGIN_COND_PLOGI; if (data[1] & QLA_LOGIO_LOGIN_RETRIED) - lio->flags |= SRB_LOGIN_RETRIED; + lio->u.logio.flags |= SRB_LOGIN_RETRIED; rval = qla2x00_start_sp(sp); if (rval != QLA_SUCCESS) goto done_free_sp; @@ -169,8 +187,7 @@ qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport, return rval; done_free_sp: - del_timer_sync(&lio->ctx.timer); - lio->ctx.free(sp); + lio->free(sp); done: return rval; } @@ -178,11 +195,12 @@ done: static void qla2x00_async_logout_ctx_done(srb_t *sp) { - struct srb_logio *lio = sp->ctx; + struct srb_ctx *ctx = sp->ctx; + struct srb_iocb *lio = ctx->u.iocb_cmd; qla2x00_post_async_logout_done_work(sp->fcport->vha, sp->fcport, - lio->data); - lio->ctx.free(sp); + lio->u.logio.data); + lio->free(sp); } int @@ -190,20 +208,22 @@ qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport) { struct qla_hw_data *ha = vha->hw; srb_t *sp; - struct srb_logio *lio; + struct srb_ctx *ctx; + struct srb_iocb *lio; int rval; rval = QLA_FUNCTION_FAILED; - sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_logio), + sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), ELS_TMO_2_RATOV(ha) + 2); if (!sp) goto done; - lio = sp->ctx; - lio->ctx.type = SRB_LOGOUT_CMD; - lio->ctx.name = "logout"; - lio->ctx.timeout = qla2x00_async_logio_timeout; - lio->ctx.done = qla2x00_async_logout_ctx_done; + ctx = sp->ctx; + ctx->type = SRB_LOGOUT_CMD; + ctx->name = "logout"; + lio = ctx->u.iocb_cmd; + lio->timeout = qla2x00_async_logio_timeout; + lio->done = qla2x00_async_logout_ctx_done; rval = qla2x00_start_sp(sp); if (rval != QLA_SUCCESS) goto done_free_sp; @@ -215,8 +235,7 @@ qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport) return rval; done_free_sp: - del_timer_sync(&lio->ctx.timer); - lio->ctx.free(sp); + lio->free(sp); done: return rval; } @@ -224,11 +243,12 @@ done: static void qla2x00_async_adisc_ctx_done(srb_t *sp) { - struct srb_logio *lio = sp->ctx; + struct srb_ctx *ctx = sp->ctx; + struct srb_iocb *lio = ctx->u.iocb_cmd; qla2x00_post_async_adisc_done_work(sp->fcport->vha, sp->fcport, - lio->data); - lio->ctx.free(sp); + lio->u.logio.data); + lio->free(sp); } int @@ -237,22 +257,24 @@ qla2x00_async_adisc(struct scsi_qla_host *vha, fc_port_t *fcport, { struct qla_hw_data *ha = vha->hw; srb_t *sp; - struct srb_logio *lio; + struct srb_ctx *ctx; + struct srb_iocb *lio; int rval; rval = QLA_FUNCTION_FAILED; - sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_logio), + sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), ELS_TMO_2_RATOV(ha) + 2); if (!sp) goto done; - lio = sp->ctx; - lio->ctx.type = SRB_ADISC_CMD; - lio->ctx.name = "adisc"; - lio->ctx.timeout = qla2x00_async_logio_timeout; - lio->ctx.done = qla2x00_async_adisc_ctx_done; + ctx = sp->ctx; + ctx->type = SRB_ADISC_CMD; + ctx->name = "adisc"; + lio = ctx->u.iocb_cmd; + lio->timeout = qla2x00_async_logio_timeout; + lio->done = qla2x00_async_adisc_ctx_done; if (data[1] & QLA_LOGIO_LOGIN_RETRIED) - lio->flags |= SRB_LOGIN_RETRIED; + lio->u.logio.flags |= SRB_LOGIN_RETRIED; rval = qla2x00_start_sp(sp); if (rval != QLA_SUCCESS) goto done_free_sp; @@ -265,13 +287,12 @@ qla2x00_async_adisc(struct scsi_qla_host *vha, fc_port_t *fcport, return rval; done_free_sp: - del_timer_sync(&lio->ctx.timer); - lio->ctx.free(sp); + lio->free(sp); done: return rval; } -int +void qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport, uint16_t *data) { @@ -308,25 +329,25 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport, qla2x00_post_async_login_work(vha, fcport, NULL); break; } - return QLA_SUCCESS; + return; } -int +void qla2x00_async_logout_done(struct scsi_qla_host *vha, fc_port_t *fcport, uint16_t *data) { qla2x00_mark_device_lost(vha, fcport, 1, 0); - return QLA_SUCCESS; + return; } -int +void qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport, uint16_t *data) { if (data[0] == MBS_COMMAND_COMPLETE) { qla2x00_update_fcport(vha, fcport); - return QLA_SUCCESS; + return; } /* Retry login. */ @@ -336,7 +357,7 @@ qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport, else qla2x00_mark_device_lost(vha, fcport, 1, 0); - return QLA_SUCCESS; + return; } /****************************************************************************/ diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 8112e41065f2..8861b88319fb 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -983,13 +983,14 @@ qla2x00_start_iocbs(srb_t *sp) static void qla24xx_login_iocb(srb_t *sp, struct logio_entry_24xx *logio) { - struct srb_logio *lio = sp->ctx; + struct srb_ctx *ctx = sp->ctx; + struct srb_iocb *lio = ctx->u.iocb_cmd; logio->entry_type = LOGINOUT_PORT_IOCB_TYPE; logio->control_flags = cpu_to_le16(LCF_COMMAND_PLOGI); - if (lio->flags & SRB_LOGIN_COND_PLOGI) + if (lio->u.logio.flags & SRB_LOGIN_COND_PLOGI) logio->control_flags |= cpu_to_le16(LCF_COND_PLOGI); - if (lio->flags & SRB_LOGIN_SKIP_PRLI) + if (lio->u.logio.flags & SRB_LOGIN_SKIP_PRLI) logio->control_flags |= cpu_to_le16(LCF_SKIP_PRLI); logio->nport_handle = cpu_to_le16(sp->fcport->loop_id); logio->port_id[0] = sp->fcport->d_id.b.al_pa; @@ -1002,14 +1003,15 @@ static void qla2x00_login_iocb(srb_t *sp, struct mbx_entry *mbx) { struct qla_hw_data *ha = sp->fcport->vha->hw; - struct srb_logio *lio = sp->ctx; + struct srb_ctx *ctx = sp->ctx; + struct srb_iocb *lio = ctx->u.iocb_cmd; uint16_t opts; mbx->entry_type = MBX_IOCB_TYPE;; SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id); mbx->mb0 = cpu_to_le16(MBC_LOGIN_FABRIC_PORT); - opts = lio->flags & SRB_LOGIN_COND_PLOGI ? BIT_0: 0; - opts |= lio->flags & SRB_LOGIN_SKIP_PRLI ? BIT_1: 0; + opts = lio->u.logio.flags & SRB_LOGIN_COND_PLOGI ? BIT_0 : 0; + opts |= lio->u.logio.flags & SRB_LOGIN_SKIP_PRLI ? BIT_1 : 0; if (HAS_EXTENDED_IDS(ha)) { mbx->mb1 = cpu_to_le16(sp->fcport->loop_id); mbx->mb10 = cpu_to_le16(opts); @@ -1086,7 +1088,7 @@ qla2x00_adisc_iocb(srb_t *sp, struct mbx_entry *mbx) static void qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb) { - struct fc_bsg_job *bsg_job = ((struct srb_bsg*)sp->ctx)->bsg_job; + struct fc_bsg_job *bsg_job = ((struct srb_ctx *)sp->ctx)->u.bsg_job; els_iocb->entry_type = ELS_IOCB_TYPE; els_iocb->entry_count = 1; @@ -1099,8 +1101,10 @@ qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb) els_iocb->sof_type = EST_SOFI3; els_iocb->rx_dsd_count = __constant_cpu_to_le16(bsg_job->reply_payload.sg_cnt); - els_iocb->opcode =(((struct srb_bsg*)sp->ctx)->ctx.type == SRB_ELS_CMD_RPT) ? - bsg_job->request->rqst_data.r_els.els_code : bsg_job->request->rqst_data.h_els.command_code; + els_iocb->opcode = + (((struct srb_ctx *)sp->ctx)->type == SRB_ELS_CMD_RPT) ? + bsg_job->request->rqst_data.r_els.els_code : + bsg_job->request->rqst_data.h_els.command_code; els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa; els_iocb->port_id[1] = sp->fcport->d_id.b.area; els_iocb->port_id[2] = sp->fcport->d_id.b.domain; @@ -1134,7 +1138,7 @@ qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb) int index; uint16_t tot_dsds; scsi_qla_host_t *vha = sp->fcport->vha; - struct fc_bsg_job *bsg_job = ((struct srb_bsg*)sp->ctx)->bsg_job; + struct fc_bsg_job *bsg_job = ((struct srb_ctx *)sp->ctx)->u.bsg_job; int loop_iterartion = 0; int cont_iocb_prsnt = 0; int entry_count = 1; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index b92f9a6ee4fb..166bb2045fd4 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -897,7 +897,8 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, const char *type; fc_port_t *fcport; srb_t *sp; - struct srb_logio *lio; + struct srb_iocb *lio; + struct srb_ctx *ctx; uint16_t *data; uint16_t status; @@ -905,14 +906,14 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, if (!sp) return; - lio = sp->ctx; - del_timer(&lio->ctx.timer); - type = lio->ctx.name; + ctx = sp->ctx; + lio = ctx->u.iocb_cmd; + type = ctx->name; fcport = sp->fcport; - data = lio->data; + data = lio->u.logio.data; data[0] = MBS_COMMAND_ERROR; - data[1] = lio->flags & SRB_LOGIN_RETRIED ? + data[1] = lio->u.logio.flags & SRB_LOGIN_RETRIED ? QLA_LOGIO_LOGIN_RETRIED : 0; if (mbx->entry_status) { DEBUG2(printk(KERN_WARNING @@ -928,7 +929,7 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, } status = le16_to_cpu(mbx->status); - if (status == 0x30 && lio->ctx.type == SRB_LOGIN_CMD && + if (status == 0x30 && ctx->type == SRB_LOGIN_CMD && le16_to_cpu(mbx->mb0) == MBS_COMMAND_COMPLETE) status = 0; if (!status && le16_to_cpu(mbx->mb0) == MBS_COMMAND_COMPLETE) { @@ -938,7 +939,7 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, le16_to_cpu(mbx->mb1))); data[0] = MBS_COMMAND_COMPLETE; - if (lio->ctx.type == SRB_LOGIN_CMD) { + if (ctx->type == SRB_LOGIN_CMD) { fcport->port_type = FCT_TARGET; if (le16_to_cpu(mbx->mb1) & BIT_0) fcport->port_type = FCT_INITIATOR; @@ -969,7 +970,7 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, le16_to_cpu(mbx->mb7))); logio_done: - lio->ctx.done(sp); + lio->done(sp); } static void @@ -980,7 +981,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, const char *type; struct qla_hw_data *ha = vha->hw; srb_t *sp; - struct srb_bsg *sp_bsg; + struct srb_ctx *sp_bsg; struct fc_bsg_job *bsg_job; uint16_t comp_status; uint32_t fw_status[3]; @@ -989,11 +990,11 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, sp = qla2x00_get_sp_from_handle(vha, func, req, pkt); if (!sp) return; - sp_bsg = (struct srb_bsg*)sp->ctx; - bsg_job = sp_bsg->bsg_job; + sp_bsg = sp->ctx; + bsg_job = sp_bsg->u.bsg_job; type = NULL; - switch (sp_bsg->ctx.type) { + switch (sp_bsg->type) { case SRB_ELS_CMD_RPT: case SRB_ELS_CMD_HST: type = "els"; @@ -1004,7 +1005,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, default: qla_printk(KERN_WARNING, ha, "%s: Unrecognized SRB: (%p) type=%d.\n", func, sp, - sp_bsg->ctx.type); + sp_bsg->type); return; } @@ -1058,8 +1059,8 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); - if ((sp_bsg->ctx.type == SRB_ELS_CMD_HST) || - (sp_bsg->ctx.type == SRB_CT_CMD)) + if ((sp_bsg->type == SRB_ELS_CMD_HST) || + (sp_bsg->type == SRB_CT_CMD)) kfree(sp->fcport); kfree(sp->ctx); mempool_free(sp, ha->srb_mempool); @@ -1074,7 +1075,8 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, const char *type; fc_port_t *fcport; srb_t *sp; - struct srb_logio *lio; + struct srb_iocb *lio; + struct srb_ctx *ctx; uint16_t *data; uint32_t iop[2]; @@ -1082,14 +1084,14 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, if (!sp) return; - lio = sp->ctx; - del_timer(&lio->ctx.timer); - type = lio->ctx.name; + ctx = sp->ctx; + lio = ctx->u.iocb_cmd; + type = ctx->name; fcport = sp->fcport; - data = lio->data; + data = lio->u.logio.data; data[0] = MBS_COMMAND_ERROR; - data[1] = lio->flags & SRB_LOGIN_RETRIED ? + data[1] = lio->u.logio.flags & SRB_LOGIN_RETRIED ? QLA_LOGIO_LOGIN_RETRIED : 0; if (logio->entry_status) { DEBUG2(printk(KERN_WARNING @@ -1108,7 +1110,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, le32_to_cpu(logio->io_parameter[0]))); data[0] = MBS_COMMAND_COMPLETE; - if (lio->ctx.type != SRB_LOGIN_CMD) + if (ctx->type != SRB_LOGIN_CMD) goto logio_done; iop[0] = le32_to_cpu(logio->io_parameter[0]); @@ -1156,7 +1158,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, le32_to_cpu(logio->io_parameter[1]))); logio_done: - lio->ctx.done(sp); + lio->done(sp); } /** diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 2e083c0d9215..70651f9fa653 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1191,24 +1191,19 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) ctx = sp->ctx; if (ctx->type == SRB_LOGIN_CMD || ctx->type == SRB_LOGOUT_CMD) { - del_timer_sync(&ctx->timer); - ctx->free(sp); + ctx->u.iocb_cmd->free(sp); } else { - struct srb_bsg *sp_bsg = - (struct srb_bsg *)sp->ctx; struct fc_bsg_job *bsg_job = - sp_bsg->bsg_job; - + ctx->u.bsg_job; if (bsg_job->request->msgcode == FC_BSG_HST_CT) kfree(sp->fcport); bsg_job->req->errors = 0; bsg_job->reply->result = res; - bsg_job->job_done( - sp_bsg->bsg_job); + bsg_job->job_done(bsg_job); kfree(sp->ctx); mempool_free(sp, - ha->srb_mempool); + ha->srb_mempool); } } } -- cgit v1.2.2 From 3822263eb1e74821ad1ae886ddd2184ae9395ff7 Mon Sep 17 00:00:00 2001 From: Madhuranath Iyengar Date: Tue, 4 May 2010 15:01:29 -0700 Subject: [SCSI] qla2xxx: Support for asynchronous TM and Marker IOCBs. Currently we can only issue the task management (TM) commands via the mailbox mechanism. This is a limitation, since only one mailbox command can be issued at a time. The purpose of this effort is to provide support for issuing and processing the respose to TM and Marker IOCBs asynchronously. Towards achieving this, the consolidated srb architecture that is currently used for BSG and IOCB/Logio commands has been enhanced and used. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_bsg.c | 4 ++ drivers/scsi/qla2xxx/qla_def.h | 22 ++++++ drivers/scsi/qla2xxx/qla_gbl.h | 7 ++ drivers/scsi/qla2xxx/qla_init.c | 156 ++++++++++++++++++++++++++++++++++++++-- drivers/scsi/qla2xxx/qla_iocb.c | 64 +++++++++++++++++ drivers/scsi/qla2xxx/qla_isr.c | 102 ++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_mbx.c | 10 +++ drivers/scsi/qla2xxx/qla_os.c | 5 ++ 8 files changed, 366 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 951db816ee45..b905dfe5ea61 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -317,6 +317,9 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job) els->type = (bsg_job->request->msgcode == FC_BSG_RPT_ELS ? SRB_ELS_CMD_RPT : SRB_ELS_CMD_HST); + els->name = + (bsg_job->request->msgcode == FC_BSG_RPT_ELS ? + "bsg_els_rpt" : "bsg_els_hst"); els->u.bsg_job = bsg_job; DEBUG2(qla_printk(KERN_INFO, ha, @@ -450,6 +453,7 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) ct = sp->ctx; ct->type = SRB_CT_CMD; + ct->name = "bsg_ct"; ct->u.bsg_job = bsg_job; DEBUG2(qla_printk(KERN_INFO, ha, diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 08f5fd5359dd..0d2cecbb8f47 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -223,6 +223,26 @@ struct srb_iocb { #define SRB_LOGIN_SKIP_PRLI BIT_2 uint16_t data[2]; } logio; + struct { + /* + * Values for flags field below are as + * defined in tsk_mgmt_entry struct + * for control_flags field in qla_fw.h. + */ + uint32_t flags; + uint32_t lun; + uint32_t data; + } tmf; + struct { + /* + * values for modif field below are as + * defined in mrk_entry_24xx struct + * for the modifier field in qla_fw.h. + */ + uint8_t modif; + uint16_t lun; + uint32_t data; + } marker; } u; struct timer_list timer; @@ -239,6 +259,8 @@ struct srb_iocb { #define SRB_ELS_CMD_HST 4 #define SRB_CT_CMD 5 #define SRB_ADISC_CMD 6 +#define SRB_TM_CMD 7 +#define SRB_MARKER_CMD 8 struct srb_ctx { uint16_t type; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 408e5f0a53c1..3dbefe1a6b5f 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -58,12 +58,18 @@ extern int qla2x00_async_login(struct scsi_qla_host *, fc_port_t *, extern int qla2x00_async_logout(struct scsi_qla_host *, fc_port_t *); extern int qla2x00_async_adisc(struct scsi_qla_host *, fc_port_t *, uint16_t *); +extern int qla2x00_async_tm_cmd(fc_port_t *, uint32_t, uint32_t, uint32_t); +extern int qla2x00_async_marker(fc_port_t *, uint16_t, uint8_t); extern void qla2x00_async_login_done(struct scsi_qla_host *, fc_port_t *, uint16_t *); extern void qla2x00_async_logout_done(struct scsi_qla_host *, fc_port_t *, uint16_t *); extern void qla2x00_async_adisc_done(struct scsi_qla_host *, fc_port_t *, uint16_t *); +extern void qla2x00_async_tm_cmd_done(struct scsi_qla_host *, fc_port_t *, + struct srb_iocb *); +extern void qla2x00_async_marker_done(struct scsi_qla_host *, fc_port_t *, + struct srb_iocb *); extern fc_port_t * qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t ); @@ -87,6 +93,7 @@ extern int ql2xetsenable; extern int ql2xshiftctondsd; extern int ql2xdbwr; extern int ql2xdontresethba; +extern int ql2xasynctmfenable; extern int qla2x00_loop_reset(scsi_qla_host_t *); extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 72b4ef270158..e78089ded517 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -125,7 +125,7 @@ done: #define ELS_TMO_2_RATOV(ha) ((ha)->r_a_tov / 10 * 2) static void -qla2x00_async_logio_timeout(srb_t *sp) +qla2x00_async_iocb_timeout(srb_t *sp) { fc_port_t *fcport = sp->fcport; struct srb_ctx *ctx = sp->ctx; @@ -170,7 +170,7 @@ qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport, ctx->type = SRB_LOGIN_CMD; ctx->name = "login"; lio = ctx->u.iocb_cmd; - lio->timeout = qla2x00_async_logio_timeout; + lio->timeout = qla2x00_async_iocb_timeout; lio->done = qla2x00_async_login_ctx_done; lio->u.logio.flags |= SRB_LOGIN_COND_PLOGI; if (data[1] & QLA_LOGIO_LOGIN_RETRIED) @@ -222,7 +222,7 @@ qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport) ctx->type = SRB_LOGOUT_CMD; ctx->name = "logout"; lio = ctx->u.iocb_cmd; - lio->timeout = qla2x00_async_logio_timeout; + lio->timeout = qla2x00_async_iocb_timeout; lio->done = qla2x00_async_logout_ctx_done; rval = qla2x00_start_sp(sp); if (rval != QLA_SUCCESS) @@ -271,7 +271,7 @@ qla2x00_async_adisc(struct scsi_qla_host *vha, fc_port_t *fcport, ctx->type = SRB_ADISC_CMD; ctx->name = "adisc"; lio = ctx->u.iocb_cmd; - lio->timeout = qla2x00_async_logio_timeout; + lio->timeout = qla2x00_async_iocb_timeout; lio->done = qla2x00_async_adisc_ctx_done; if (data[1] & QLA_LOGIO_LOGIN_RETRIED) lio->u.logio.flags |= SRB_LOGIN_RETRIED; @@ -292,6 +292,112 @@ done: return rval; } +static void +qla2x00_async_tm_cmd_ctx_done(srb_t *sp) +{ + struct srb_ctx *ctx = sp->ctx; + struct srb_iocb *iocb = (struct srb_iocb *)ctx->u.iocb_cmd; + + qla2x00_async_tm_cmd_done(sp->fcport->vha, sp->fcport, iocb); + iocb->free(sp); +} + +int +qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t flags, uint32_t lun, + uint32_t tag) +{ + struct scsi_qla_host *vha = fcport->vha; + struct qla_hw_data *ha = vha->hw; + srb_t *sp; + struct srb_ctx *ctx; + struct srb_iocb *tcf; + int rval; + + rval = QLA_FUNCTION_FAILED; + sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), + ELS_TMO_2_RATOV(ha) + 2); + if (!sp) + goto done; + + ctx = sp->ctx; + ctx->type = SRB_TM_CMD; + ctx->name = "tmf"; + tcf = ctx->u.iocb_cmd; + tcf->u.tmf.flags = flags; + tcf->u.tmf.lun = lun; + tcf->u.tmf.data = tag; + tcf->timeout = qla2x00_async_iocb_timeout; + tcf->done = qla2x00_async_tm_cmd_ctx_done; + + rval = qla2x00_start_sp(sp); + if (rval != QLA_SUCCESS) + goto done_free_sp; + + DEBUG2(printk(KERN_DEBUG + "scsi(%ld:%x): Async-tmf - loop-id=%x portid=%02x%02x%02x.\n", + fcport->vha->host_no, sp->handle, fcport->loop_id, + fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa)); + + return rval; + +done_free_sp: + tcf->free(sp); +done: + return rval; +} + +static void +qla2x00_async_marker_ctx_done(srb_t *sp) +{ + struct srb_ctx *ctx = sp->ctx; + struct srb_iocb *iocb = (struct srb_iocb *)ctx->u.iocb_cmd; + + qla2x00_async_marker_done(sp->fcport->vha, sp->fcport, iocb); + iocb->free(sp); +} + +int +qla2x00_async_marker(fc_port_t *fcport, uint16_t lun, uint8_t modif) +{ + struct scsi_qla_host *vha = fcport->vha; + srb_t *sp; + struct srb_ctx *ctx; + struct srb_iocb *mrk; + int rval; + + rval = QLA_FUNCTION_FAILED; + sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), 0); + if (!sp) + goto done; + + ctx = sp->ctx; + ctx->type = SRB_MARKER_CMD; + ctx->name = "marker"; + mrk = ctx->u.iocb_cmd; + mrk->u.marker.lun = lun; + mrk->u.marker.modif = modif; + mrk->timeout = qla2x00_async_iocb_timeout; + mrk->done = qla2x00_async_marker_ctx_done; + + rval = qla2x00_start_sp(sp); + if (rval != QLA_SUCCESS) + goto done_free_sp; + + DEBUG2(printk(KERN_DEBUG + "scsi(%ld:%x): Async-marker - loop-id=%x " + "portid=%02x%02x%02x.\n", + fcport->vha->host_no, sp->handle, fcport->loop_id, + fcport->d_id.b.domain, fcport->d_id.b.area, + fcport->d_id.b.al_pa)); + + return rval; + +done_free_sp: + mrk->free(sp); +done: + return rval; +} + void qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport, uint16_t *data) @@ -360,6 +466,48 @@ qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport, return; } +void +qla2x00_async_tm_cmd_done(struct scsi_qla_host *vha, fc_port_t *fcport, + struct srb_iocb *iocb) +{ + int rval; + uint32_t flags; + uint16_t lun; + + flags = iocb->u.tmf.flags; + lun = (uint16_t)iocb->u.tmf.lun; + + /* Issue Marker IOCB */ + rval = qla2x00_async_marker(fcport, lun, + flags == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID); + + if ((rval != QLA_SUCCESS) || iocb->u.tmf.data) { + DEBUG2_3_11(printk(KERN_WARNING + "%s(%ld): TM IOCB failed (%x).\n", + __func__, vha->host_no, rval)); + } + + return; +} + +void +qla2x00_async_marker_done(struct scsi_qla_host *vha, fc_port_t *fcport, + struct srb_iocb *iocb) +{ + /* + * Currently we dont have any specific post response processing + * for this IOCB. We'll just return success or failed + * depending on whether the IOCB command succeeded or failed. + */ + if (iocb->u.tmf.data) { + DEBUG2_3_11(printk(KERN_WARNING + "%s(%ld): Marker IOCB failed (%x).\n", + __func__, vha->host_no, iocb->u.tmf.data)); + } + + return; +} + /****************************************************************************/ /* QLogic ISP2x00 Hardware Support Functions. */ /****************************************************************************/ diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 8861b88319fb..d7a9fff15ad5 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -1085,6 +1085,64 @@ qla2x00_adisc_iocb(srb_t *sp, struct mbx_entry *mbx) mbx->mb9 = cpu_to_le16(sp->fcport->vp_idx); } +static void +qla24xx_tm_iocb(srb_t *sp, struct tsk_mgmt_entry *tsk) +{ + uint32_t flags; + unsigned int lun; + struct fc_port *fcport = sp->fcport; + scsi_qla_host_t *vha = fcport->vha; + struct qla_hw_data *ha = vha->hw; + struct srb_ctx *ctx = sp->ctx; + struct srb_iocb *iocb = ctx->u.iocb_cmd; + struct req_que *req = vha->req; + + flags = iocb->u.tmf.flags; + lun = iocb->u.tmf.lun; + + tsk->entry_type = TSK_MGMT_IOCB_TYPE; + tsk->entry_count = 1; + tsk->handle = MAKE_HANDLE(req->id, tsk->handle); + tsk->nport_handle = cpu_to_le16(fcport->loop_id); + tsk->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2); + tsk->control_flags = cpu_to_le32(flags); + tsk->port_id[0] = fcport->d_id.b.al_pa; + tsk->port_id[1] = fcport->d_id.b.area; + tsk->port_id[2] = fcport->d_id.b.domain; + tsk->vp_index = fcport->vp_idx; + + if (flags == TCF_LUN_RESET) { + int_to_scsilun(lun, &tsk->lun); + host_to_fcp_swap((uint8_t *)&tsk->lun, + sizeof(tsk->lun)); + } +} + +static void +qla24xx_marker_iocb(srb_t *sp, struct mrk_entry_24xx *mrk) +{ + uint16_t lun; + uint8_t modif; + struct fc_port *fcport = sp->fcport; + scsi_qla_host_t *vha = fcport->vha; + struct srb_ctx *ctx = sp->ctx; + struct srb_iocb *iocb = ctx->u.iocb_cmd; + struct req_que *req = vha->req; + + lun = iocb->u.marker.lun; + modif = iocb->u.marker.modif; + mrk->entry_type = MARKER_TYPE; + mrk->modifier = modif; + if (modif != MK_SYNC_ALL) { + mrk->nport_handle = cpu_to_le16(fcport->loop_id); + mrk->lun[1] = LSB(lun); + mrk->lun[2] = MSB(lun); + host_to_fcp_swap(mrk->lun, sizeof(mrk->lun)); + mrk->vp_index = vha->vp_idx; + mrk->handle = MAKE_HANDLE(req->id, mrk->handle); + } +} + static void qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb) { @@ -1239,6 +1297,12 @@ qla2x00_start_sp(srb_t *sp) qla24xx_adisc_iocb(sp, pkt) : qla2x00_adisc_iocb(sp, pkt); break; + case SRB_TM_CMD: + qla24xx_tm_iocb(sp, pkt); + break; + case SRB_MARKER_CMD: + qla24xx_marker_iocb(sp, pkt); + break; default: break; } diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 166bb2045fd4..eed71ea1d947 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1161,6 +1161,99 @@ logio_done: lio->done(sp); } +static void +qla24xx_tm_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, + struct tsk_mgmt_entry *tsk) +{ + const char func[] = "TMF-IOCB"; + const char *type; + fc_port_t *fcport; + srb_t *sp; + struct srb_iocb *iocb; + struct srb_ctx *ctx; + struct sts_entry_24xx *sts = (struct sts_entry_24xx *)tsk; + int error = 1; + + sp = qla2x00_get_sp_from_handle(vha, func, req, tsk); + if (!sp) + return; + + ctx = sp->ctx; + iocb = ctx->u.iocb_cmd; + type = ctx->name; + fcport = sp->fcport; + + if (sts->entry_status) { + DEBUG2(printk(KERN_WARNING + "scsi(%ld:%x): Async-%s error - entry-status(%x).\n", + fcport->vha->host_no, sp->handle, type, + sts->entry_status)); + } else if (sts->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) { + DEBUG2(printk(KERN_WARNING + "scsi(%ld:%x): Async-%s error - completion status(%x).\n", + fcport->vha->host_no, sp->handle, type, + sts->comp_status)); + } else if (!(le16_to_cpu(sts->scsi_status) & + SS_RESPONSE_INFO_LEN_VALID)) { + DEBUG2(printk(KERN_WARNING + "scsi(%ld:%x): Async-%s error - no response info(%x).\n", + fcport->vha->host_no, sp->handle, type, + sts->scsi_status)); + } else if (le32_to_cpu(sts->rsp_data_len) < 4) { + DEBUG2(printk(KERN_WARNING + "scsi(%ld:%x): Async-%s error - not enough response(%d).\n", + fcport->vha->host_no, sp->handle, type, + sts->rsp_data_len)); + } else if (sts->data[3]) { + DEBUG2(printk(KERN_WARNING + "scsi(%ld:%x): Async-%s error - response(%x).\n", + fcport->vha->host_no, sp->handle, type, + sts->data[3])); + } else { + error = 0; + } + + if (error) { + iocb->u.tmf.data = error; + DEBUG2(qla2x00_dump_buffer((uint8_t *)sts, sizeof(*sts))); + } + + iocb->done(sp); +} + +static void +qla24xx_marker_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, + struct mrk_entry_24xx *mrk) +{ + const char func[] = "MRK-IOCB"; + const char *type; + fc_port_t *fcport; + srb_t *sp; + struct srb_iocb *iocb; + struct srb_ctx *ctx; + struct sts_entry_24xx *sts = (struct sts_entry_24xx *)mrk; + + sp = qla2x00_get_sp_from_handle(vha, func, req, mrk); + if (!sp) + return; + + ctx = sp->ctx; + iocb = ctx->u.iocb_cmd; + type = ctx->name; + fcport = sp->fcport; + + if (sts->entry_status) { + iocb->u.marker.data = 1; + DEBUG2(printk(KERN_WARNING + "scsi(%ld:%x): Async-%s error entry - entry-status=%x.\n", + fcport->vha->host_no, sp->handle, type, + sts->entry_status)); + DEBUG2(qla2x00_dump_buffer((uint8_t *)mrk, sizeof(*sts))); + } + + iocb->done(sp); +} + /** * qla2x00_process_response_queue() - Process response queue entries. * @ha: SCSI driver HA context @@ -1225,6 +1318,7 @@ qla2x00_process_response_queue(struct rsp_que *rsp) case MBX_IOCB_TYPE: qla2x00_mbx_iocb_entry(vha, rsp->req, (struct mbx_entry *)pkt); + break; default: /* Type Not Supported. */ DEBUG4(printk(KERN_WARNING @@ -1751,6 +1845,14 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha, qla24xx_logio_entry(vha, rsp->req, (struct logio_entry_24xx *)pkt); break; + case TSK_MGMT_IOCB_TYPE: + qla24xx_tm_iocb_entry(vha, rsp->req, + (struct tsk_mgmt_entry *)pkt); + break; + case MARKER_TYPE: + qla24xx_marker_iocb_entry(vha, rsp->req, + (struct mrk_entry_24xx *)pkt); + break; case CT_IOCB_TYPE: qla24xx_els_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE); clear_bit(MBX_INTERRUPT, &vha->hw->mbx_cmd_flags); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 2f3033228061..f3650d0434ca 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2464,12 +2464,22 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport, int qla24xx_abort_target(struct fc_port *fcport, unsigned int l, int tag) { + struct qla_hw_data *ha = fcport->vha->hw; + + if ((ql2xasynctmfenable) && IS_FWI2_CAPABLE(ha)) + return qla2x00_async_tm_cmd(fcport, TCF_TARGET_RESET, l, tag); + return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET, fcport, l, tag); } int qla24xx_lun_reset(struct fc_port *fcport, unsigned int l, int tag) { + struct qla_hw_data *ha = fcport->vha->hw; + + if ((ql2xasynctmfenable) && IS_FWI2_CAPABLE(ha)) + return qla2x00_async_tm_cmd(fcport, TCF_LUN_RESET, l, tag); + return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l, tag); } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 70651f9fa653..523d414b59af 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -142,6 +142,11 @@ MODULE_PARM_DESC(ql2xdontresethba, " 1 -- Do not reset on failure.\n"); +int ql2xasynctmfenable; +module_param(ql2xasynctmfenable, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xasynctmfenable, + "Enables issue of TM IOCBs asynchronously via IOCB mechanism" + "Default is 0 - Issue TM IOCBs via mailbox mechanism."); /* * SCSI host template entry points */ -- cgit v1.2.2 From bad750028917a7b804623701d0674e46c6012c18 Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Tue, 4 May 2010 15:01:30 -0700 Subject: [SCSI] qla2xxx: T10 DIF support added. Signed-off-by: Duane Grigsby Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 16 + drivers/scsi/qla2xxx/qla_dbg.c | 58 ++++ drivers/scsi/qla2xxx/qla_dbg.h | 10 + drivers/scsi/qla2xxx/qla_def.h | 84 ++++- drivers/scsi/qla2xxx/qla_fw.h | 47 ++- drivers/scsi/qla2xxx/qla_gbl.h | 4 + drivers/scsi/qla2xxx/qla_inline.h | 16 + drivers/scsi/qla2xxx/qla_iocb.c | 678 +++++++++++++++++++++++++++++++++++++- drivers/scsi/qla2xxx/qla_isr.c | 77 +++++ drivers/scsi/qla2xxx/qla_os.c | 75 ++++- 10 files changed, 1053 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 5c98b097cfda..62a22cfae20e 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1726,6 +1726,22 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable) fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN); } + if (IS_QLA25XX(ha) && ql2xenabledif) { + if (ha->fw_attributes & BIT_4) { + vha->flags.difdix_supported = 1; + DEBUG18(qla_printk(KERN_INFO, ha, + "Registering for DIF/DIX type 1 and 3" + " protection.\n")); + scsi_host_set_prot(vha->host, + SHOST_DIF_TYPE1_PROTECTION + | SHOST_DIF_TYPE3_PROTECTION + | SHOST_DIX_TYPE1_PROTECTION + | SHOST_DIX_TYPE3_PROTECTION); + scsi_host_set_guard(vha->host, SHOST_DIX_GUARD_CRC); + } else + vha->flags.difdix_supported = 0; + } + if (scsi_add_host_with_dma(vha->host, &fc_vport->dev, &ha->pdev->dev)) { DEBUG15(printk("scsi(%ld): scsi_add_host failure for VP[%d].\n", diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 89bfc119010b..2afc8a362f2c 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -1663,4 +1663,62 @@ qla2x00_dump_buffer(uint8_t * b, uint32_t size) printk("\n"); } +void +qla2x00_dump_buffer_zipped(uint8_t *b, uint32_t size) +{ + uint32_t cnt; + uint8_t c; + uint8_t last16[16], cur16[16]; + uint32_t lc = 0, num_same16 = 0, j; + + printk(KERN_DEBUG " 0 1 2 3 4 5 6 7 8 9 " + "Ah Bh Ch Dh Eh Fh\n"); + printk(KERN_DEBUG "----------------------------------------" + "----------------------\n"); + + for (cnt = 0; cnt < size;) { + c = *b++; + cur16[lc++] = c; + + cnt++; + if (cnt % 16) + continue; + + /* We have 16 now */ + lc = 0; + if (num_same16 == 0) { + memcpy(last16, cur16, 16); + num_same16++; + continue; + } + if (memcmp(cur16, last16, 16) == 0) { + num_same16++; + continue; + } + for (j = 0; j < 16; j++) + printk(KERN_DEBUG "%02x ", (uint32_t)last16[j]); + printk(KERN_DEBUG "\n"); + + if (num_same16 > 1) + printk(KERN_DEBUG "> prev pattern repeats (%u)" + "more times\n", num_same16-1); + memcpy(last16, cur16, 16); + num_same16 = 1; + } + + if (num_same16) { + for (j = 0; j < 16; j++) + printk(KERN_DEBUG "%02x ", (uint32_t)last16[j]); + printk(KERN_DEBUG "\n"); + + if (num_same16 > 1) + printk(KERN_DEBUG "> prev pattern repeats (%u)" + "more times\n", num_same16-1); + } + if (lc) { + for (j = 0; j < lc; j++) + printk(KERN_DEBUG "%02x ", (uint32_t)cur16[j]); + printk(KERN_DEBUG "\n"); + } +} diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h index d6d9c86cb058..916c81f3f55d 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.h +++ b/drivers/scsi/qla2xxx/qla_dbg.h @@ -27,6 +27,9 @@ /* #define QL_DEBUG_LEVEL_15 */ /* Output NPIV trace msgs */ /* #define QL_DEBUG_LEVEL_16 */ /* Output ISP84XX trace msgs */ /* #define QL_DEBUG_LEVEL_17 */ /* Output EEH trace messages */ +/* #define QL_DEBUG_LEVEL_18 */ /* Output T10 CRC trace messages */ + +/* #define QL_PRINTK_BUF */ /* Captures printk to buffer */ /* * Macros use for debugging the driver. @@ -139,6 +142,13 @@ #define DEBUG17(x) do {} while (0) #endif +#if defined(QL_DEBUG_LEVEL_18) +#define DEBUG18(x) do {if (ql2xextended_error_logging) x; } while (0) +#else +#define DEBUG18(x) do {} while (0) +#endif + + /* * Firmware Dump structure definition */ diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 0d2cecbb8f47..4559f5c6c1ae 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -188,6 +188,16 @@ struct req_que; +/* + * (sd.h is not exported, hence local inclusion) + * Data Integrity Field tuple. + */ +struct sd_dif_tuple { + __be16 guard_tag; /* Checksum */ + __be16 app_tag; /* Opaque storage */ + __be32 ref_tag; /* Target LBA or indirect LBA */ +}; + /* * SCSI Request Block */ @@ -208,8 +218,14 @@ typedef struct srb { /* * SRB flag definitions */ -#define SRB_DMA_VALID BIT_0 /* Command sent to ISP */ -#define SRB_FCP_CMND_DMA_VALID BIT_12 /* FCP command in IOCB */ +#define SRB_DMA_VALID BIT_0 /* Command sent to ISP */ +#define SRB_FCP_CMND_DMA_VALID BIT_12 /* DIF: DSD List valid */ +#define SRB_CRC_CTX_DMA_VALID BIT_2 /* DIF: context DMA valid */ +#define SRB_CRC_PROT_DMA_VALID BIT_4 /* DIF: prot DMA valid */ +#define SRB_CRC_CTX_DSD_VALID BIT_5 /* DIF: dsd_list valid */ + +/* To identify if a srb is of T10-CRC type. @sp => srb_t pointer */ +#define IS_PROT_IO(sp) (sp->flags & SRB_CRC_CTX_DSD_VALID) /* * SRB extensions. @@ -1330,6 +1346,66 @@ typedef struct { uint32_t dseg_4_length; /* Data segment 4 length. */ } cont_a64_entry_t; +#define PO_MODE_DIF_INSERT 0 +#define PO_MODE_DIF_REMOVE BIT_0 +#define PO_MODE_DIF_PASS BIT_1 +#define PO_MODE_DIF_REPLACE (BIT_0 + BIT_1) +#define PO_ENABLE_DIF_BUNDLING BIT_8 +#define PO_ENABLE_INCR_GUARD_SEED BIT_3 +#define PO_DISABLE_INCR_REF_TAG BIT_5 +#define PO_DISABLE_GUARD_CHECK BIT_4 +/* + * ISP queue - 64-Bit addressing, continuation crc entry structure definition. + */ +struct crc_context { + uint32_t handle; /* System handle. */ + uint32_t ref_tag; + uint16_t app_tag; + uint8_t ref_tag_mask[4]; /* Validation/Replacement Mask*/ + uint8_t app_tag_mask[2]; /* Validation/Replacement Mask*/ + uint16_t guard_seed; /* Initial Guard Seed */ + uint16_t prot_opts; /* Requested Data Protection Mode */ + uint16_t blk_size; /* Data size in bytes */ + uint16_t runt_blk_guard; /* Guard value for runt block (tape + * only) */ + uint32_t byte_count; /* Total byte count/ total data + * transfer count */ + union { + struct { + uint32_t reserved_1; + uint16_t reserved_2; + uint16_t reserved_3; + uint32_t reserved_4; + uint32_t data_address[2]; + uint32_t data_length; + uint32_t reserved_5[2]; + uint32_t reserved_6; + } nobundling; + struct { + uint32_t dif_byte_count; /* Total DIF byte + * count */ + uint16_t reserved_1; + uint16_t dseg_count; /* Data segment count */ + uint32_t reserved_2; + uint32_t data_address[2]; + uint32_t data_length; + uint32_t dif_address[2]; + uint32_t dif_length; /* Data segment 0 + * length */ + } bundling; + } u; + + struct fcp_cmnd fcp_cmnd; + dma_addr_t crc_ctx_dma; + /* List of DMA context transfers */ + struct list_head dsd_list; + + /* This structure should not exceed 512 bytes */ +}; + +#define CRC_CONTEXT_LEN_FW (offsetof(struct crc_context, fcp_cmnd.lun)) +#define CRC_CONTEXT_FCPCMND_OFF (offsetof(struct crc_context, fcp_cmnd.lun)) + /* * ISP queue - status entry structure definition. */ @@ -1390,6 +1466,7 @@ typedef struct { #define CS_ABORTED 0x5 /* System aborted command. */ #define CS_TIMEOUT 0x6 /* Timeout error. */ #define CS_DATA_OVERRUN 0x7 /* Data overrun. */ +#define CS_DIF_ERROR 0xC /* DIF error detected */ #define CS_DATA_UNDERRUN 0x15 /* Data Underrun. */ #define CS_QUEUE_FULL 0x1C /* Queue Full. */ @@ -2732,6 +2809,7 @@ typedef struct scsi_qla_host { uint32_t management_server_logged_in :1; uint32_t process_response_queue :1; + uint32_t difdix_supported:1; } flags; atomic_t loop_state; @@ -2883,6 +2961,8 @@ typedef struct scsi_qla_host { #define OPTROM_BURST_SIZE 0x1000 #define OPTROM_BURST_DWORDS (OPTROM_BURST_SIZE / 4) +#define QLA_DSDS_PER_IOCB 37 + #include "qla_gbl.h" #include "qla_dbg.h" #include "qla_inline.h" diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index a77a2471eaff..93f833960147 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -400,6 +400,7 @@ struct cmd_type_6 { struct scsi_lun lun; /* FCP LUN (BE). */ uint16_t control_flags; /* Control flags. */ +#define CF_DIF_SEG_DESCR_ENABLE BIT_3 #define CF_DATA_SEG_DESCR_ENABLE BIT_2 #define CF_READ_DATA BIT_1 #define CF_WRITE_DATA BIT_0 @@ -466,6 +467,43 @@ struct cmd_type_7 { uint32_t dseg_0_len; /* Data segment 0 length. */ }; +#define COMMAND_TYPE_CRC_2 0x6A /* Command Type CRC_2 (Type 6) + * (T10-DIF) */ +struct cmd_type_crc_2 { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t nport_handle; /* N_PORT handle. */ + uint16_t timeout; /* Command timeout. */ + + uint16_t dseg_count; /* Data segment count. */ + + uint16_t fcp_rsp_dseg_len; /* FCP_RSP DSD length. */ + + struct scsi_lun lun; /* FCP LUN (BE). */ + + uint16_t control_flags; /* Control flags. */ + + uint16_t fcp_cmnd_dseg_len; /* Data segment length. */ + uint32_t fcp_cmnd_dseg_address[2]; /* Data segment address. */ + + uint32_t fcp_rsp_dseg_address[2]; /* Data segment address. */ + + uint32_t byte_count; /* Total byte count. */ + + uint8_t port_id[3]; /* PortID of destination port. */ + uint8_t vp_index; + + uint32_t crc_context_address[2]; /* Data segment address. */ + uint16_t crc_context_len; /* Data segment length. */ + uint16_t reserved_1; /* MUST be set to 0. */ +}; + + /* * ISP queue - status entry structure definition. */ @@ -496,10 +534,17 @@ struct sts_entry_24xx { uint32_t sense_len; /* FCP SENSE length. */ uint32_t rsp_data_len; /* FCP response data length. */ - uint8_t data[28]; /* FCP response/sense information. */ + /* + * If DIF Error is set in comp_status, these additional fields are + * defined: + * &data[10] : uint8_t report_runt_bg[2]; - computed guard + * &data[12] : uint8_t actual_dif[8]; - DIF Data recieved + * &data[20] : uint8_t expected_dif[8]; - DIF Data computed + */ }; + /* * Status entry completion status */ diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 3dbefe1a6b5f..3e946da74b96 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -94,6 +94,8 @@ extern int ql2xshiftctondsd; extern int ql2xdbwr; extern int ql2xdontresethba; extern int ql2xasynctmfenable; +extern int ql2xenabledif; +extern int ql2xenablehba_err_chk; extern int qla2x00_loop_reset(scsi_qla_host_t *); extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int); @@ -179,6 +181,7 @@ extern int qla2x00_start_sp(srb_t *); extern void qla2x00_ctx_sp_free(srb_t *); extern uint16_t qla24xx_calc_iocbs(uint16_t); extern void qla24xx_build_scsi_iocbs(srb_t *, struct cmd_type_7 *, uint16_t); +extern int qla24xx_dif_start_scsi(srb_t *); /* @@ -423,6 +426,7 @@ extern void qla25xx_fw_dump(scsi_qla_host_t *, int); extern void qla81xx_fw_dump(scsi_qla_host_t *, int); extern void qla2x00_dump_regs(scsi_qla_host_t *); extern void qla2x00_dump_buffer(uint8_t *, uint32_t); +extern void qla2x00_dump_buffer_zipped(uint8_t *, uint32_t); /* * Global Function Prototypes in qla_gs.c source file. diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index ad53c6455556..84c2fea154d2 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -67,3 +67,19 @@ qla2x00_is_reserved_id(scsi_qla_host_t *vha, uint16_t loop_id) return ((loop_id > ha->max_loop_id && loop_id < SNS_FIRST_LOOP_ID) || loop_id == MANAGEMENT_SERVER || loop_id == BROADCAST); } + +static inline void +qla2x00_clean_dsd_pool(struct qla_hw_data *ha, srb_t *sp) +{ + struct dsd_dma *dsd_ptr, *tdsd_ptr; + + /* clean up allocated prev pool */ + list_for_each_entry_safe(dsd_ptr, tdsd_ptr, + &((struct crc_context *)sp->ctx)->dsd_list, list) { + dma_pool_free(ha->dl_dma_pool, dsd_ptr->dsd_addr, + dsd_ptr->dsd_list_dma); + list_del(&dsd_ptr->list); + kfree(dsd_ptr); + } + INIT_LIST_HEAD(&((struct crc_context *)sp->ctx)->dsd_list); +} diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index d7a9fff15ad5..8ef945365412 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -145,7 +145,49 @@ qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha) return (cont_pkt); } -/** +static inline int +qla24xx_configure_prot_mode(srb_t *sp, uint16_t *fw_prot_opts) +{ + uint8_t guard = scsi_host_get_guard(sp->cmd->device->host); + + /* We only support T10 DIF right now */ + if (guard != SHOST_DIX_GUARD_CRC) { + DEBUG2(printk(KERN_ERR "Unsupported guard: %d\n", guard)); + return 0; + } + + /* We always use DIFF Bundling for best performance */ + *fw_prot_opts = 0; + + /* Translate SCSI opcode to a protection opcode */ + switch (scsi_get_prot_op(sp->cmd)) { + case SCSI_PROT_READ_STRIP: + *fw_prot_opts |= PO_MODE_DIF_REMOVE; + break; + case SCSI_PROT_WRITE_INSERT: + *fw_prot_opts |= PO_MODE_DIF_INSERT; + break; + case SCSI_PROT_READ_INSERT: + *fw_prot_opts |= PO_MODE_DIF_INSERT; + break; + case SCSI_PROT_WRITE_STRIP: + *fw_prot_opts |= PO_MODE_DIF_REMOVE; + break; + case SCSI_PROT_READ_PASS: + *fw_prot_opts |= PO_MODE_DIF_PASS; + break; + case SCSI_PROT_WRITE_PASS: + *fw_prot_opts |= PO_MODE_DIF_PASS; + break; + default: /* Normal Request */ + *fw_prot_opts |= PO_MODE_DIF_PASS; + break; + } + + return scsi_prot_sg_count(sp->cmd); +} + +/* * qla2x00_build_scsi_iocbs_32() - Build IOCB command utilizing 32bit * capable IOCB types. * @@ -636,6 +678,8 @@ qla24xx_calc_iocbs(uint16_t dsds) if ((dsds - 1) % 5) iocbs++; } + DEBUG3(printk(KERN_DEBUG "%s(): Required PKT(s) = %d\n", + __func__, iocbs)); return iocbs; } @@ -716,6 +760,453 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt, } } +struct fw_dif_context { + uint32_t ref_tag; + uint16_t app_tag; + uint8_t ref_tag_mask[4]; /* Validation/Replacement Mask*/ + uint8_t app_tag_mask[2]; /* Validation/Replacement Mask*/ +}; + +/* + * qla24xx_set_t10dif_tags_from_cmd - Extract Ref and App tags from SCSI command + * + */ +static inline void +qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, + unsigned int protcnt) +{ + struct sd_dif_tuple *spt; + unsigned char op = scsi_get_prot_op(cmd); + + switch (scsi_get_prot_type(cmd)) { + /* For TYPE 0 protection: no checking */ + case SCSI_PROT_DIF_TYPE0: + pkt->ref_tag_mask[0] = 0x00; + pkt->ref_tag_mask[1] = 0x00; + pkt->ref_tag_mask[2] = 0x00; + pkt->ref_tag_mask[3] = 0x00; + break; + + /* + * For TYPE 2 protection: 16 bit GUARD + 32 bit REF tag has to + * match LBA in CDB + N + */ + case SCSI_PROT_DIF_TYPE2: + break; + + /* For Type 3 protection: 16 bit GUARD only */ + case SCSI_PROT_DIF_TYPE3: + pkt->ref_tag_mask[0] = pkt->ref_tag_mask[1] = + pkt->ref_tag_mask[2] = pkt->ref_tag_mask[3] = + 0x00; + break; + + /* + * For TYpe 1 protection: 16 bit GUARD tag, 32 bit REF tag, and + * 16 bit app tag. + */ + case SCSI_PROT_DIF_TYPE1: + if (!ql2xenablehba_err_chk) + break; + + if (protcnt && (op == SCSI_PROT_WRITE_STRIP || + op == SCSI_PROT_WRITE_PASS)) { + spt = page_address(sg_page(scsi_prot_sglist(cmd))) + + scsi_prot_sglist(cmd)[0].offset; + DEBUG18(printk(KERN_DEBUG + "%s(): LBA from user %p, lba = 0x%x\n", + __func__, spt, (int)spt->ref_tag)); + pkt->ref_tag = swab32(spt->ref_tag); + pkt->app_tag_mask[0] = 0x0; + pkt->app_tag_mask[1] = 0x0; + } else { + pkt->ref_tag = cpu_to_le32((uint32_t) + (0xffffffff & scsi_get_lba(cmd))); + pkt->app_tag = __constant_cpu_to_le16(0); + pkt->app_tag_mask[0] = 0x0; + pkt->app_tag_mask[1] = 0x0; + } + /* enable ALL bytes of the ref tag */ + pkt->ref_tag_mask[0] = 0xff; + pkt->ref_tag_mask[1] = 0xff; + pkt->ref_tag_mask[2] = 0xff; + pkt->ref_tag_mask[3] = 0xff; + break; + } + + DEBUG18(printk(KERN_DEBUG + "%s(): Setting protection Tags: (BIG) ref tag = 0x%x," + " app tag = 0x%x, prot SG count %d , cmd lba 0x%x," + " prot_type=%u\n", __func__, pkt->ref_tag, pkt->app_tag, protcnt, + (int)scsi_get_lba(cmd), scsi_get_prot_type(cmd))); +} + + +static int +qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd, + uint16_t tot_dsds) +{ + void *next_dsd; + uint8_t avail_dsds = 0; + uint32_t dsd_list_len; + struct dsd_dma *dsd_ptr; + struct scatterlist *sg; + uint32_t *cur_dsd = dsd; + int i; + uint16_t used_dsds = tot_dsds; + + uint8_t *cp; + + scsi_for_each_sg(sp->cmd, sg, tot_dsds, i) { + dma_addr_t sle_dma; + + /* Allocate additional continuation packets? */ + if (avail_dsds == 0) { + avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ? + QLA_DSDS_PER_IOCB : used_dsds; + dsd_list_len = (avail_dsds + 1) * 12; + used_dsds -= avail_dsds; + + /* allocate tracking DS */ + dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC); + if (!dsd_ptr) + return 1; + + /* allocate new list */ + dsd_ptr->dsd_addr = next_dsd = + dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC, + &dsd_ptr->dsd_list_dma); + + if (!next_dsd) { + /* + * Need to cleanup only this dsd_ptr, rest + * will be done by sp_free_dma() + */ + kfree(dsd_ptr); + return 1; + } + + list_add_tail(&dsd_ptr->list, + &((struct crc_context *)sp->ctx)->dsd_list); + + sp->flags |= SRB_CRC_CTX_DSD_VALID; + + /* add new list to cmd iocb or last list */ + *cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = dsd_list_len; + cur_dsd = (uint32_t *)next_dsd; + } + sle_dma = sg_dma_address(sg); + DEBUG18(printk("%s(): %p, sg entry %d - addr =0x%x 0x%x," + " len =%d\n", __func__ , cur_dsd, i, LSD(sle_dma), + MSD(sle_dma), sg_dma_len(sg))); + *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(sg_dma_len(sg)); + avail_dsds--; + + if (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_PASS) { + cp = page_address(sg_page(sg)) + sg->offset; + DEBUG18(printk("%s(): User Data buffer= %p:\n", + __func__ , cp)); + } + } + /* Null termination */ + *cur_dsd++ = 0; + *cur_dsd++ = 0; + *cur_dsd++ = 0; + return 0; +} + +static int +qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *ha, srb_t *sp, + uint32_t *dsd, + uint16_t tot_dsds) +{ + void *next_dsd; + uint8_t avail_dsds = 0; + uint32_t dsd_list_len; + struct dsd_dma *dsd_ptr; + struct scatterlist *sg; + int i; + struct scsi_cmnd *cmd; + uint32_t *cur_dsd = dsd; + uint16_t used_dsds = tot_dsds; + + uint8_t *cp; + + + cmd = sp->cmd; + scsi_for_each_prot_sg(cmd, sg, tot_dsds, i) { + dma_addr_t sle_dma; + + /* Allocate additional continuation packets? */ + if (avail_dsds == 0) { + avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ? + QLA_DSDS_PER_IOCB : used_dsds; + dsd_list_len = (avail_dsds + 1) * 12; + used_dsds -= avail_dsds; + + /* allocate tracking DS */ + dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC); + if (!dsd_ptr) + return 1; + + /* allocate new list */ + dsd_ptr->dsd_addr = next_dsd = + dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC, + &dsd_ptr->dsd_list_dma); + + if (!next_dsd) { + /* + * Need to cleanup only this dsd_ptr, rest + * will be done by sp_free_dma() + */ + kfree(dsd_ptr); + return 1; + } + + list_add_tail(&dsd_ptr->list, + &((struct crc_context *)sp->ctx)->dsd_list); + + sp->flags |= SRB_CRC_CTX_DSD_VALID; + + /* add new list to cmd iocb or last list */ + *cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = dsd_list_len; + cur_dsd = (uint32_t *)next_dsd; + } + sle_dma = sg_dma_address(sg); + if (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_PASS) { + DEBUG18(printk(KERN_DEBUG + "%s(): %p, sg entry %d - addr =0x%x" + "0x%x, len =%d\n", __func__ , cur_dsd, i, + LSD(sle_dma), MSD(sle_dma), sg_dma_len(sg))); + } + *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(sg_dma_len(sg)); + + if (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_PASS) { + cp = page_address(sg_page(sg)) + sg->offset; + DEBUG18(printk("%s(): Protection Data buffer = %p:\n", + __func__ , cp)); + } + avail_dsds--; + } + /* Null termination */ + *cur_dsd++ = 0; + *cur_dsd++ = 0; + *cur_dsd++ = 0; + return 0; +} + +/** + * qla24xx_build_scsi_crc_2_iocbs() - Build IOCB command utilizing Command + * Type 6 IOCB types. + * + * @sp: SRB command to process + * @cmd_pkt: Command type 3 IOCB + * @tot_dsds: Total number of segments to transfer + */ +static inline int +qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, + uint16_t tot_dsds, uint16_t tot_prot_dsds, uint16_t fw_prot_opts) +{ + uint32_t *cur_dsd, *fcp_dl; + scsi_qla_host_t *vha; + struct scsi_cmnd *cmd; + struct scatterlist *cur_seg; + int sgc; + uint32_t total_bytes; + uint32_t data_bytes; + uint32_t dif_bytes; + uint8_t bundling = 1; + uint16_t blk_size; + uint8_t *clr_ptr; + struct crc_context *crc_ctx_pkt = NULL; + struct qla_hw_data *ha; + uint8_t additional_fcpcdb_len; + uint16_t fcp_cmnd_len; + struct fcp_cmnd *fcp_cmnd; + dma_addr_t crc_ctx_dma; + + cmd = sp->cmd; + + sgc = 0; + /* Update entry type to indicate Command Type CRC_2 IOCB */ + *((uint32_t *)(&cmd_pkt->entry_type)) = + __constant_cpu_to_le32(COMMAND_TYPE_CRC_2); + + /* No data transfer */ + data_bytes = scsi_bufflen(cmd); + if (!data_bytes || cmd->sc_data_direction == DMA_NONE) { + DEBUG18(printk(KERN_INFO "%s: Zero data bytes or DMA-NONE %d\n", + __func__, data_bytes)); + cmd_pkt->byte_count = __constant_cpu_to_le32(0); + return QLA_SUCCESS; + } + + vha = sp->fcport->vha; + ha = vha->hw; + + DEBUG18(printk(KERN_DEBUG + "%s(%ld): Executing cmd sp %p, pid=%ld, prot_op=%u.\n", __func__, + vha->host_no, sp, cmd->serial_number, scsi_get_prot_op(sp->cmd))); + + cmd_pkt->vp_index = sp->fcport->vp_idx; + + /* Set transfer direction */ + if (cmd->sc_data_direction == DMA_TO_DEVICE) { + cmd_pkt->control_flags = + __constant_cpu_to_le16(CF_WRITE_DATA); + } else if (cmd->sc_data_direction == DMA_FROM_DEVICE) { + cmd_pkt->control_flags = + __constant_cpu_to_le16(CF_READ_DATA); + } + + tot_prot_dsds = scsi_prot_sg_count(cmd); + if (!tot_prot_dsds) + bundling = 0; + + /* Allocate CRC context from global pool */ + crc_ctx_pkt = sp->ctx = dma_pool_alloc(ha->dl_dma_pool, + GFP_ATOMIC, &crc_ctx_dma); + + if (!crc_ctx_pkt) + goto crc_queuing_error; + + /* Zero out CTX area. */ + clr_ptr = (uint8_t *)crc_ctx_pkt; + memset(clr_ptr, 0, sizeof(*crc_ctx_pkt)); + + crc_ctx_pkt->crc_ctx_dma = crc_ctx_dma; + + sp->flags |= SRB_CRC_CTX_DMA_VALID; + + /* Set handle */ + crc_ctx_pkt->handle = cmd_pkt->handle; + + INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list); + + qla24xx_set_t10dif_tags(cmd, (struct fw_dif_context *) + &crc_ctx_pkt->ref_tag, tot_prot_dsds); + + cmd_pkt->crc_context_address[0] = cpu_to_le32(LSD(crc_ctx_dma)); + cmd_pkt->crc_context_address[1] = cpu_to_le32(MSD(crc_ctx_dma)); + cmd_pkt->crc_context_len = CRC_CONTEXT_LEN_FW; + + /* Determine SCSI command length -- align to 4 byte boundary */ + if (cmd->cmd_len > 16) { + DEBUG18(printk(KERN_INFO "%s(): **** SCSI CMD > 16\n", + __func__)); + additional_fcpcdb_len = cmd->cmd_len - 16; + if ((cmd->cmd_len % 4) != 0) { + /* SCSI cmd > 16 bytes must be multiple of 4 */ + goto crc_queuing_error; + } + fcp_cmnd_len = 12 + cmd->cmd_len + 4; + } else { + additional_fcpcdb_len = 0; + fcp_cmnd_len = 12 + 16 + 4; + } + + fcp_cmnd = &crc_ctx_pkt->fcp_cmnd; + + fcp_cmnd->additional_cdb_len = additional_fcpcdb_len; + if (cmd->sc_data_direction == DMA_TO_DEVICE) + fcp_cmnd->additional_cdb_len |= 1; + else if (cmd->sc_data_direction == DMA_FROM_DEVICE) + fcp_cmnd->additional_cdb_len |= 2; + + int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun); + memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); + cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len); + cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32( + LSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF)); + cmd_pkt->fcp_cmnd_dseg_address[1] = cpu_to_le32( + MSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF)); + fcp_cmnd->task_attribute = 0; + fcp_cmnd->task_managment = 0; + + cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */ + + DEBUG18(printk(KERN_INFO "%s(%ld): Total SG(s) Entries %d, Data" + "entries %d, data bytes %d, Protection entries %d\n", + __func__, vha->host_no, tot_dsds, (tot_dsds-tot_prot_dsds), + data_bytes, tot_prot_dsds)); + + /* Compute dif len and adjust data len to incude protection */ + total_bytes = data_bytes; + dif_bytes = 0; + blk_size = cmd->device->sector_size; + if (scsi_get_prot_type(cmd) == SCSI_PROT_DIF_TYPE1) { + dif_bytes = (data_bytes / blk_size) * 8; + total_bytes += dif_bytes; + } + + if (!ql2xenablehba_err_chk) + fw_prot_opts |= 0x10; /* Disable Guard tag checking */ + + if (!bundling) { + cur_dsd = (uint32_t *) &crc_ctx_pkt->u.nobundling.data_address; + } else { + /* + * Configure Bundling if we need to fetch interlaving + * protection PCI accesses + */ + fw_prot_opts |= PO_ENABLE_DIF_BUNDLING; + crc_ctx_pkt->u.bundling.dif_byte_count = cpu_to_le32(dif_bytes); + crc_ctx_pkt->u.bundling.dseg_count = cpu_to_le16(tot_dsds - + tot_prot_dsds); + cur_dsd = (uint32_t *) &crc_ctx_pkt->u.bundling.data_address; + } + + /* Finish the common fields of CRC pkt */ + crc_ctx_pkt->blk_size = cpu_to_le16(blk_size); + crc_ctx_pkt->prot_opts = cpu_to_le16(fw_prot_opts); + crc_ctx_pkt->byte_count = cpu_to_le32(data_bytes); + crc_ctx_pkt->guard_seed = __constant_cpu_to_le16(0); + /* Fibre channel byte count */ + cmd_pkt->byte_count = cpu_to_le32(total_bytes); + fcp_dl = (uint32_t *)(crc_ctx_pkt->fcp_cmnd.cdb + 16 + + additional_fcpcdb_len); + *fcp_dl = htonl(total_bytes); + + DEBUG18(printk(KERN_INFO "%s(%ld): dif bytes = 0x%x (%d), total bytes" + " = 0x%x (%d), dat block size =0x%x (%d)\n", __func__, + vha->host_no, dif_bytes, dif_bytes, total_bytes, total_bytes, + crc_ctx_pkt->blk_size, crc_ctx_pkt->blk_size)); + + /* Walks data segments */ + + cmd_pkt->control_flags |= + __constant_cpu_to_le16(CF_DATA_SEG_DESCR_ENABLE); + if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd, + (tot_dsds - tot_prot_dsds))) + goto crc_queuing_error; + + if (bundling && tot_prot_dsds) { + /* Walks dif segments */ + cur_seg = scsi_prot_sglist(cmd); + cmd_pkt->control_flags |= + __constant_cpu_to_le16(CF_DIF_SEG_DESCR_ENABLE); + cur_dsd = (uint32_t *) &crc_ctx_pkt->u.bundling.dif_address; + if (qla24xx_walk_and_build_prot_sglist(ha, sp, cur_dsd, + tot_prot_dsds)) + goto crc_queuing_error; + } + return QLA_SUCCESS; + +crc_queuing_error: + DEBUG18(qla_printk(KERN_INFO, ha, + "CMD sent FAILED crc_q error:sp = %p\n", sp)); + /* Cleanup will be performed by the caller */ + + return QLA_FUNCTION_FAILED; +} /** * qla24xx_start_scsi() - Send a SCSI command to the ISP @@ -869,6 +1360,191 @@ queuing_error: return QLA_FUNCTION_FAILED; } + +/** + * qla24xx_dif_start_scsi() - Send a SCSI command to the ISP + * @sp: command to send to the ISP + * + * Returns non-zero if a failure occurred, else zero. + */ +int +qla24xx_dif_start_scsi(srb_t *sp) +{ + int nseg; + unsigned long flags; + uint32_t *clr_ptr; + uint32_t index; + uint32_t handle; + uint16_t cnt; + uint16_t req_cnt = 0; + uint16_t tot_dsds; + uint16_t tot_prot_dsds; + uint16_t fw_prot_opts = 0; + struct req_que *req = NULL; + struct rsp_que *rsp = NULL; + struct scsi_cmnd *cmd = sp->cmd; + struct scsi_qla_host *vha = sp->fcport->vha; + struct qla_hw_data *ha = vha->hw; + struct cmd_type_crc_2 *cmd_pkt; + uint32_t status = 0; + +#define QDSS_GOT_Q_SPACE BIT_0 + + /* Only process protection in this routine */ + if (scsi_get_prot_op(cmd) == SCSI_PROT_NORMAL) + return qla24xx_start_scsi(sp); + + /* Setup device pointers. */ + + qla25xx_set_que(sp, &rsp); + req = vha->req; + + /* So we know we haven't pci_map'ed anything yet */ + tot_dsds = 0; + + /* Send marker if required */ + if (vha->marker_needed != 0) { + if (qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL) != + QLA_SUCCESS) + return QLA_FUNCTION_FAILED; + vha->marker_needed = 0; + } + + /* Acquire ring specific lock */ + spin_lock_irqsave(&ha->hardware_lock, flags); + + /* Check for room in outstanding command list. */ + handle = req->current_outstanding_cmd; + for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { + handle++; + if (handle == MAX_OUTSTANDING_COMMANDS) + handle = 1; + if (!req->outstanding_cmds[handle]) + break; + } + + if (index == MAX_OUTSTANDING_COMMANDS) + goto queuing_error; + + /* Compute number of required data segments */ + /* Map the sg table so we have an accurate count of sg entries needed */ + if (scsi_sg_count(cmd)) { + nseg = dma_map_sg(&ha->pdev->dev, scsi_sglist(cmd), + scsi_sg_count(cmd), cmd->sc_data_direction); + if (unlikely(!nseg)) + goto queuing_error; + else + sp->flags |= SRB_DMA_VALID; + } else + nseg = 0; + + /* number of required data segments */ + tot_dsds = nseg; + + /* Compute number of required protection segments */ + if (qla24xx_configure_prot_mode(sp, &fw_prot_opts)) { + nseg = dma_map_sg(&ha->pdev->dev, scsi_prot_sglist(cmd), + scsi_prot_sg_count(cmd), cmd->sc_data_direction); + if (unlikely(!nseg)) + goto queuing_error; + else + sp->flags |= SRB_CRC_PROT_DMA_VALID; + } else { + nseg = 0; + } + + req_cnt = 1; + /* Total Data and protection sg segment(s) */ + tot_prot_dsds = nseg; + tot_dsds += nseg; + if (req->cnt < (req_cnt + 2)) { + cnt = RD_REG_DWORD_RELAXED(req->req_q_out); + + if (req->ring_index < cnt) + req->cnt = cnt - req->ring_index; + else + req->cnt = req->length - + (req->ring_index - cnt); + } + + if (req->cnt < (req_cnt + 2)) + goto queuing_error; + + status |= QDSS_GOT_Q_SPACE; + + /* Build header part of command packet (excluding the OPCODE). */ + req->current_outstanding_cmd = handle; + req->outstanding_cmds[handle] = sp; + sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; + req->cnt -= req_cnt; + + /* Fill-in common area */ + cmd_pkt = (struct cmd_type_crc_2 *)req->ring_ptr; + cmd_pkt->handle = MAKE_HANDLE(req->id, handle); + + clr_ptr = (uint32_t *)cmd_pkt + 2; + memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8); + + /* Set NPORT-ID and LUN number*/ + cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id); + cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa; + cmd_pkt->port_id[1] = sp->fcport->d_id.b.area; + cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain; + + int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); + host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun)); + + /* Total Data and protection segment(s) */ + cmd_pkt->dseg_count = cpu_to_le16(tot_dsds); + + /* Build IOCB segments and adjust for data protection segments */ + if (qla24xx_build_scsi_crc_2_iocbs(sp, (struct cmd_type_crc_2 *) + req->ring_ptr, tot_dsds, tot_prot_dsds, fw_prot_opts) != + QLA_SUCCESS) + goto queuing_error; + + cmd_pkt->entry_count = (uint8_t)req_cnt; + /* Specify response queue number where completion should happen */ + cmd_pkt->entry_status = (uint8_t) rsp->id; + cmd_pkt->timeout = __constant_cpu_to_le16(0); + wmb(); + + /* Adjust ring index. */ + req->ring_index++; + if (req->ring_index == req->length) { + req->ring_index = 0; + req->ring_ptr = req->ring; + } else + req->ring_ptr++; + + /* Set chip new ring index. */ + WRT_REG_DWORD(req->req_q_in, req->ring_index); + RD_REG_DWORD_RELAXED(&ha->iobase->isp24.hccr); + + /* Manage unprocessed RIO/ZIO commands in response queue. */ + if (vha->flags.process_response_queue && + rsp->ring_ptr->signature != RESPONSE_PROCESSED) + qla24xx_process_response_queue(vha, rsp); + + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + return QLA_SUCCESS; + +queuing_error: + if (status & QDSS_GOT_Q_SPACE) { + req->outstanding_cmds[handle] = NULL; + req->cnt += req_cnt; + } + /* Cleanup will be performed by the caller (queuecommand) */ + + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + DEBUG18(qla_printk(KERN_INFO, ha, + "CMD sent FAILED SCSI prot_op:%02x\n", scsi_get_prot_op(cmd))); + return QLA_FUNCTION_FAILED; +} + + static void qla25xx_set_que(srb_t *sp, struct rsp_que **rsp) { struct scsi_cmnd *cmd = sp->cmd; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index eed71ea1d947..be3d8bed2ecf 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -10,6 +10,7 @@ #include #include #include +#include static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t); static void qla2x00_process_completed_request(struct scsi_qla_host *, @@ -1364,6 +1365,78 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len, DEBUG5(qla2x00_dump_buffer(cp->sense_buffer, sense_len)); } +struct scsi_dif_tuple { + __be16 guard; /* Checksum */ + __be16 app_tag; /* APPL identifer */ + __be32 ref_tag; /* Target LBA or indirect LBA */ +}; + +/* + * Checks the guard or meta-data for the type of error + * detected by the HBA. In case of errors, we set the + * ASC/ASCQ fields in the sense buffer with ILLEGAL_REQUEST + * to indicate to the kernel that the HBA detected error. + */ +static inline void +qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24) +{ + struct scsi_cmnd *cmd = sp->cmd; + struct scsi_dif_tuple *ep = + (struct scsi_dif_tuple *)&sts24->data[20]; + struct scsi_dif_tuple *ap = + (struct scsi_dif_tuple *)&sts24->data[12]; + uint32_t e_ref_tag, a_ref_tag; + uint16_t e_app_tag, a_app_tag; + uint16_t e_guard, a_guard; + + e_ref_tag = be32_to_cpu(ep->ref_tag); + a_ref_tag = be32_to_cpu(ap->ref_tag); + e_app_tag = be16_to_cpu(ep->app_tag); + a_app_tag = be16_to_cpu(ap->app_tag); + e_guard = be16_to_cpu(ep->guard); + a_guard = be16_to_cpu(ap->guard); + + DEBUG18(printk(KERN_DEBUG + "%s(): iocb(s) %p Returned STATUS\n", __func__, sts24)); + + DEBUG18(printk(KERN_ERR "DIF ERROR in cmd 0x%x lba 0x%llx act ref" + " tag=0x%x, exp ref_tag=0x%x, act app tag=0x%x, exp app" + " tag=0x%x, act guard=0x%x, exp guard=0x%x\n", + cmd->cmnd[0], (u64)scsi_get_lba(cmd), a_ref_tag, e_ref_tag, + a_app_tag, e_app_tag, a_guard, e_guard)); + + + /* check guard */ + if (e_guard != a_guard) { + scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, + 0x10, 0x1); + set_driver_byte(cmd, DRIVER_SENSE); + set_host_byte(cmd, DID_ABORT); + cmd->result |= SAM_STAT_CHECK_CONDITION << 1; + return; + } + + /* check appl tag */ + if (e_app_tag != a_app_tag) { + scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, + 0x10, 0x2); + set_driver_byte(cmd, DRIVER_SENSE); + set_host_byte(cmd, DID_ABORT); + cmd->result |= SAM_STAT_CHECK_CONDITION << 1; + return; + } + + /* check ref tag */ + if (e_ref_tag != a_ref_tag) { + scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, + 0x10, 0x3); + set_driver_byte(cmd, DRIVER_SENSE); + set_host_byte(cmd, DID_ABORT); + cmd->result |= SAM_STAT_CHECK_CONDITION << 1; + return; + } +} + /** * qla2x00_status_entry() - Process a Status IOCB entry. * @ha: SCSI driver HA context @@ -1630,6 +1703,10 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) case CS_ABORTED: cp->result = DID_RESET << 16; break; + + case CS_DIF_ERROR: + qla2x00_handle_dif_error(sp, sts24); + break; default: cp->result = DID_ERROR << 16; break; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 523d414b59af..5104aefdc7e6 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -92,6 +92,19 @@ module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xmaxqdepth, "Maximum queue depth to report for target devices."); +/* Do not change the value of this after module load */ +int ql2xenabledif = 1; +module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql2xenabledif, + " Enable T10-CRC-DIF " + " Default is 0 - No DIF Support. 1 - Enable it"); + +int ql2xenablehba_err_chk; +module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(ql2xenablehba_err_chk, + " Enable T10-CRC-DIF Error isolation by HBA" + " Default is 0 - Error isolation disabled, 1 - Enable it"); + int ql2xiidmaenable=1; module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xiidmaenable, @@ -537,6 +550,14 @@ qla2xxx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) if (fcport->drport) goto qc24_target_busy; + if (!vha->flags.difdix_supported && + scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) { + DEBUG2(qla_printk(KERN_ERR, ha, + "DIF Cap Not Reg, fail DIF capable cmd's:%x\n", + cmd->cmnd[0])); + cmd->result = DID_NO_CONNECT << 16; + goto qc24_fail_command; + } if (atomic_read(&fcport->state) != FCS_ONLINE) { if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || atomic_read(&base_vha->loop_state) == LOOP_DEAD) { @@ -776,7 +797,8 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (sp == NULL) continue; - if ((sp->ctx) && !(sp->flags & SRB_FCP_CMND_DMA_VALID)) + if ((sp->ctx) && !(sp->flags & SRB_FCP_CMND_DMA_VALID) && + !IS_PROT_IO(sp)) continue; if (sp->cmd != cmd) continue; @@ -842,7 +864,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t, sp = req->outstanding_cmds[cnt]; if (!sp) continue; - if (sp->ctx) + if ((sp->ctx) && !IS_PROT_IO(sp)) continue; if (vha->vp_idx != sp->fcport->vha->vp_idx) continue; @@ -1189,7 +1211,8 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) if (sp) { req->outstanding_cmds[cnt] = NULL; if (!sp->ctx || - (sp->flags & SRB_FCP_CMND_DMA_VALID)) { + (sp->flags & SRB_FCP_CMND_DMA_VALID) || + IS_PROT_IO(sp)) { sp->cmd->result = res; qla2x00_sp_compl(ha, sp); } else { @@ -1553,7 +1576,7 @@ static struct isp_operations qla25xx_isp_ops = { .read_optrom = qla25xx_read_optrom_data, .write_optrom = qla24xx_write_optrom_data, .get_flash_version = qla24xx_get_flash_version, - .start_scsi = qla24xx_start_scsi, + .start_scsi = qla24xx_dif_start_scsi, .abort_isp = qla2x00_abort_isp, }; @@ -2185,6 +2208,22 @@ skip_dpc: DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n", base_vha->host_no, ha)); + if (IS_QLA25XX(ha) && ql2xenabledif) { + if (ha->fw_attributes & BIT_4) { + base_vha->flags.difdix_supported = 1; + DEBUG18(qla_printk(KERN_INFO, ha, + "Registering for DIF/DIX type 1 and 3" + " protection.\n")); + scsi_host_set_prot(host, + SHOST_DIF_TYPE1_PROTECTION + | SHOST_DIF_TYPE3_PROTECTION + | SHOST_DIX_TYPE1_PROTECTION + | SHOST_DIX_TYPE3_PROTECTION); + scsi_host_set_guard(host, SHOST_DIX_GUARD_CRC); + } else + base_vha->flags.difdix_supported = 0; + } + ha->isp_ops->enable_intrs(ha); ret = scsi_add_host(host, &pdev->dev); @@ -2546,7 +2585,7 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, if (!ha->s_dma_pool) goto fail_free_nvram; - if (IS_QLA82XX(ha)) { + if (IS_QLA82XX(ha) || ql2xenabledif) { ha->dl_dma_pool = dma_pool_create(name, &ha->pdev->dev, DSD_LIST_DMA_POOL_SIZE, 8, 0); if (!ha->dl_dma_pool) { @@ -2678,12 +2717,12 @@ fail_free_ms_iocb: ha->ms_iocb = NULL; ha->ms_iocb_dma = 0; fail_dma_pool: - if (IS_QLA82XX(ha)) { + if (IS_QLA82XX(ha) || ql2xenabledif) { dma_pool_destroy(ha->fcp_cmnd_dma_pool); ha->fcp_cmnd_dma_pool = NULL; } fail_dl_dma_pool: - if (IS_QLA82XX(ha)) { + if (IS_QLA82XX(ha) || ql2xenabledif) { dma_pool_destroy(ha->dl_dma_pool); ha->dl_dma_pool = NULL; } @@ -3346,11 +3385,31 @@ static void qla2x00_sp_free_dma(srb_t *sp) { struct scsi_cmnd *cmd = sp->cmd; + struct qla_hw_data *ha = sp->fcport->vha->hw; if (sp->flags & SRB_DMA_VALID) { scsi_dma_unmap(cmd); sp->flags &= ~SRB_DMA_VALID; } + + if (sp->flags & SRB_CRC_PROT_DMA_VALID) { + dma_unmap_sg(&ha->pdev->dev, scsi_prot_sglist(cmd), + scsi_prot_sg_count(cmd), cmd->sc_data_direction); + sp->flags &= ~SRB_CRC_PROT_DMA_VALID; + } + + if (sp->flags & SRB_CRC_CTX_DSD_VALID) { + /* List assured to be having elements */ + qla2x00_clean_dsd_pool(ha, sp); + sp->flags &= ~SRB_CRC_CTX_DSD_VALID; + } + + if (sp->flags & SRB_CRC_CTX_DMA_VALID) { + dma_pool_free(ha->dl_dma_pool, sp->ctx, + ((struct crc_context *)sp->ctx)->crc_ctx_dma); + sp->flags &= ~SRB_CRC_CTX_DMA_VALID; + } + CMD_SP(cmd) = NULL; } @@ -3464,7 +3523,7 @@ qla2x00_timer(scsi_qla_host_t *vha) sp = req->outstanding_cmds[index]; if (!sp) continue; - if (sp->ctx) + if (sp->ctx && !IS_PROT_IO(sp)) continue; sfcp = sp->fcport; if (!(sfcp->flags & FCF_FCP2_DEVICE)) -- cgit v1.2.2 From 1516ef44835417f55645cdd9ccf203551ca6e8c0 Mon Sep 17 00:00:00 2001 From: Mike Waychison Date: Tue, 4 May 2010 15:01:31 -0700 Subject: [SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did. The qla2xxx driver uses a port_id_t to mark the start of its enumerations. gcc is complaining that wrap.b24 may be used uninitialized, but this doesn't look to be possible. Silence it. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index e78089ded517..7fd1344ff1f9 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3150,7 +3150,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, sw_info_t *swl; int swl_idx; int first_dev, last_dev; - port_id_t wrap, nxt_d_id; + port_id_t wrap = {}, nxt_d_id; struct qla_hw_data *ha = vha->hw; struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev); struct scsi_qla_host *tvp; @@ -3453,7 +3453,7 @@ qla2x00_device_resync(scsi_qla_host_t *vha) uint32_t rscn_entry; uint8_t rscn_out_iter; uint8_t format; - port_id_t d_id; + port_id_t d_id = {}; rval = QLA_RSCNS_HANDLED; -- cgit v1.2.2 From 86fbee86e94c7e80c9bb01db0cf68b7977462109 Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Tue, 4 May 2010 15:01:32 -0700 Subject: [SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive The problem occurring is a hw-race where there's an outstanding read-flash operation occurring while the chip is being reset (done via an sg_reset script). After the chip is paused, the read-flash operation never completes and the DPC thread, while trying to complete the reset, is never able to recover, as the HW appears to be hung... The fix is to wait for outstanding flash operation prior to doing a sg_reset -h. And to wait for reset to complete before any flash operations. Note, during the wait, if any of the operation (reset/flash) does not complete, failure is returned to the upper layer. The upper layer either need to fail or retry. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 6 ++++++ drivers/scsi/qla2xxx/qla_os.c | 46 ++++++++++++++++++++++++++++++++++++++++- 2 files changed, 51 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 62a22cfae20e..3b708606b932 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -281,6 +281,12 @@ qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, return count; } + if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) { + qla_printk(KERN_WARNING, ha, + "HBA not online, failing NVRAM update.\n"); + return -EAGAIN; + } + DEBUG2(qla_printk(KERN_INFO, ha, "Reading flash region -- 0x%x/0x%x.\n", ha->optrom_region_start, ha->optrom_region_size)); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 5104aefdc7e6..0de92d376677 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -676,6 +676,50 @@ qla2x00_wait_for_hba_online(scsi_qla_host_t *vha) return (return_status); } +/* + * qla2x00_wait_for_reset_ready + * Wait till the HBA is online after going through + * <= MAX_RETRIES_OF_ISP_ABORT or + * finally HBA is disabled ie marked offline or flash + * operations are in progress. + * + * Input: + * ha - pointer to host adapter structure + * + * Note: + * Does context switching-Release SPIN_LOCK + * (if any) before calling this routine. + * + * Return: + * Success (Adapter is online/no flash ops) : 0 + * Failed (Adapter is offline/disabled/flash ops in progress) : 1 + */ +int +qla2x00_wait_for_reset_ready(scsi_qla_host_t *vha) +{ + int return_status; + unsigned long wait_online; + struct qla_hw_data *ha = vha->hw; + scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); + + wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ); + while (((test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags)) || + test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) || + test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) || + ha->optrom_state != QLA_SWAITING || + ha->dpc_active) && time_before(jiffies, wait_online)) + msleep(1000); + + if (base_vha->flags.online && ha->optrom_state == QLA_SWAITING) + return_status = QLA_SUCCESS; + else + return_status = QLA_FUNCTION_FAILED; + + DEBUG2(printk("%s return_status=%d\n", __func__, return_status)); + + return return_status; +} + int qla2x00_wait_for_chip_reset(scsi_qla_host_t *vha) { @@ -1081,7 +1125,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", vha->host_no, id, lun); - if (qla2x00_wait_for_hba_online(vha) != QLA_SUCCESS) + if (qla2x00_wait_for_reset_ready(vha) != QLA_SUCCESS) goto eh_host_reset_lock; /* -- cgit v1.2.2 From f4c496c1fbaa59dbb3820c18453df661079b1d4a Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Tue, 4 May 2010 15:01:33 -0700 Subject: [SCSI] qla2xxx: Optionally disable target reset. Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_gbl.h | 1 + drivers/scsi/qla2xxx/qla_os.c | 8 +++++++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 3e946da74b96..8217c3bcbc2e 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -96,6 +96,7 @@ extern int ql2xdontresethba; extern int ql2xasynctmfenable; extern int ql2xenabledif; extern int ql2xenablehba_err_chk; +extern int ql2xtargetreset; extern int qla2x00_loop_reset(scsi_qla_host_t *); extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 0de92d376677..be1a8fcbb1fb 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -154,6 +154,12 @@ MODULE_PARM_DESC(ql2xdontresethba, " 0 (Default) -- Reset on failure.\n" " 1 -- Do not reset on failure.\n"); +int ql2xtargetreset = 1; +module_param(ql2xtargetreset, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xtargetreset, + "Enable target reset." + "Default is 1 - use hw defaults."); + int ql2xasynctmfenable; module_param(ql2xasynctmfenable, int, S_IRUGO|S_IRUSR); @@ -1193,7 +1199,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha) struct fc_port *fcport; struct qla_hw_data *ha = vha->hw; - if (ha->flags.enable_target_reset) { + if (ql2xtargetreset == 1 && ha->flags.enable_target_reset) { list_for_each_entry(fcport, &vha->vp_fcports, list) { if (fcport->port_type != FCT_TARGET) continue; -- cgit v1.2.2 From f1af6208c8cef81e313ec2e64b44e783c3a11c13 Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Tue, 4 May 2010 15:01:34 -0700 Subject: [SCSI] qla2xxx: Updates to ISP82xx support. 1) Allow transition to NEED RESET state only from READY state for ISP82xx. 2) Avoid infinite ISP aborts when chip reset fails. 3) Code cleanup to remove some of the unused debug code. Signed-off-by: Lalit Chandivade Signed-off-by: Santosh Vernekar Signed-off-by: Giridhar Malavali Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 2 - drivers/scsi/qla2xxx/qla_init.c | 33 ------- drivers/scsi/qla2xxx/qla_nx.c | 205 ++++++++++++++++++++-------------------- drivers/scsi/qla2xxx/qla_nx.h | 15 +-- 4 files changed, 111 insertions(+), 144 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 4559f5c6c1ae..839610909018 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2764,8 +2764,6 @@ struct qla_hw_data { unsigned long nx_pcibase; /* Base I/O address */ uint8_t *nxdb_rd_ptr; /* Doorbell read pointer */ unsigned long nxdb_wr_ptr; /* Door bell write pointer */ - unsigned long first_page_group_start; - unsigned long first_page_group_end; uint32_t crb_win; uint32_t curr_window; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 7fd1344ff1f9..ab2cc71994c2 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -5296,39 +5296,6 @@ qla82xx_restart_isp(scsi_qla_host_t *vha) "(%d).\n", rval); } } - } else { /* failed the ISP abort */ - vha->flags.online = 1; - if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - if (ha->isp_abort_cnt == 0) { - qla_printk(KERN_WARNING, ha, - "ISP error recovery failed - " - "board disabled\n"); - /* - * The next call disables the board - * completely. - */ - ha->isp_ops->reset_adapter(vha); - vha->flags.online = 0; - clear_bit(ISP_ABORT_RETRY, - &vha->dpc_flags); - status = 0; - } else { /* schedule another ISP abort */ - ha->isp_abort_cnt--; - qla_printk(KERN_INFO, ha, - "qla%ld: ISP abort - " - "retry remaining %d\n", - vha->host_no, ha->isp_abort_cnt); - status = 1; - } - } else { - ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT; - qla_printk(KERN_INFO, ha, - "(%ld): ISP error recovery " - "- retrying (%d) more times\n", - vha->host_no, ha->isp_abort_cnt); - set_bit(ISP_ABORT_RETRY, &vha->dpc_flags); - status = 1; - } } if (!status) { diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 495ff1ade36e..ff562de0e8e7 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -30,16 +30,6 @@ #define QLA82XX_PCI_CAMQM_2M_BASE (0x000ff800UL) #define CRB_INDIRECT_2M (0x1e0000UL) -static inline void *qla82xx_pci_base_offsetfset(struct qla_hw_data *ha, - unsigned long off) -{ - if ((off < ha->first_page_group_end) && - (off >= ha->first_page_group_start)) - return (void *)(ha->nx_pcibase + off); - - return NULL; -} - #define MAX_CRB_XFORM 60 static unsigned long crb_addr_xform[MAX_CRB_XFORM]; int qla82xx_crb_table_initialized; @@ -335,6 +325,18 @@ unsigned qla82xx_crb_hub_agt[64] = { 0, }; +/* Device states */ +char *qdev_state[] = { + "Unknown", + "Cold", + "Initializing", + "Ready", + "Need Reset", + "Need Quiescent", + "Failed", + "Quiescent", +}; + /* * In: 'off' is offset from CRB space in 128M pci map * Out: 'off' is 2M pci map addr @@ -661,7 +663,7 @@ static int qla82xx_pci_mem_read_direct(struct qla_hw_data *ha, u64 off, void *data, int size) { unsigned long flags; - void *addr; + void *addr = NULL; int ret = 0; u64 start; uint8_t *mem_ptr = NULL; @@ -684,26 +686,23 @@ static int qla82xx_pci_mem_read_direct(struct qla_hw_data *ha, return -1; } - addr = qla82xx_pci_base_offsetfset(ha, start); - if (!addr) { - write_unlock_irqrestore(&ha->hw_lock, flags); - mem_base = pci_resource_start(ha->pdev, 0); - mem_page = start & PAGE_MASK; - /* Map two pages whenever user tries to access addresses in two - * consecutive pages. - */ - if (mem_page != ((start + size - 1) & PAGE_MASK)) - mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2); - else - mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); - if (mem_ptr == 0UL) { - *(u8 *)data = 0; - return -1; - } - addr = mem_ptr; - addr += start & (PAGE_SIZE - 1); - write_lock_irqsave(&ha->hw_lock, flags); + write_unlock_irqrestore(&ha->hw_lock, flags); + mem_base = pci_resource_start(ha->pdev, 0); + mem_page = start & PAGE_MASK; + /* Map two pages whenever user tries to access addresses in two + * consecutive pages. + */ + if (mem_page != ((start + size - 1) & PAGE_MASK)) + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2); + else + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); + if (mem_ptr == 0UL) { + *(u8 *)data = 0; + return -1; } + addr = mem_ptr; + addr += start & (PAGE_SIZE - 1); + write_lock_irqsave(&ha->hw_lock, flags); switch (size) { case 1: @@ -734,7 +733,7 @@ qla82xx_pci_mem_write_direct(struct qla_hw_data *ha, u64 off, void *data, int size) { unsigned long flags; - void *addr; + void *addr = NULL; int ret = 0; u64 start; uint8_t *mem_ptr = NULL; @@ -757,25 +756,22 @@ qla82xx_pci_mem_write_direct(struct qla_hw_data *ha, return -1; } - addr = qla82xx_pci_base_offsetfset(ha, start); - if (!addr) { - write_unlock_irqrestore(&ha->hw_lock, flags); - mem_base = pci_resource_start(ha->pdev, 0); - mem_page = start & PAGE_MASK; - /* Map two pages whenever user tries to access addresses in two - * consecutive pages. - */ - if (mem_page != ((start + size - 1) & PAGE_MASK)) - mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2); - else - mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); - if (mem_ptr == 0UL) - return -1; + write_unlock_irqrestore(&ha->hw_lock, flags); + mem_base = pci_resource_start(ha->pdev, 0); + mem_page = start & PAGE_MASK; + /* Map two pages whenever user tries to access addresses in two + * consecutive pages. + */ + if (mem_page != ((start + size - 1) & PAGE_MASK)) + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2); + else + mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); + if (mem_ptr == 0UL) + return -1; - addr = mem_ptr; - addr += start & (PAGE_SIZE - 1); - write_lock_irqsave(&ha->hw_lock, flags); - } + addr = mem_ptr; + addr += start & (PAGE_SIZE - 1); + write_lock_irqsave(&ha->hw_lock, flags); switch (size) { case 1: @@ -1866,6 +1862,14 @@ void qla82xx_config_rings(struct scsi_qla_host *vha) WRT_REG_DWORD((unsigned long __iomem *)®->rsp_q_out[0], 0); } +void qla82xx_reset_adapter(struct scsi_qla_host *vha) +{ + struct qla_hw_data *ha = vha->hw; + vha->flags.online = 0; + qla2x00_try_to_stop_firmware(vha); + ha->isp_ops->disable_intrs(ha); +} + int qla82xx_fw_load_from_blob(struct qla_hw_data *ha) { u64 *ptr64; @@ -2093,15 +2097,7 @@ qla82xx_intr_handler(int irq, void *dev_id) if (RD_REG_DWORD(®->host_int)) { stat = RD_REG_DWORD(®->host_status); - if (stat & HSRX_RISC_PAUSED) { - if (pci_channel_offline(ha->pdev)) - break; - - qla_printk(KERN_INFO, ha, "RISC paused\n"); - set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); - qla2xxx_wake_dpc(vha); - break; - } else if ((stat & HSRX_RISC_INT) == 0) + if ((stat & HSRX_RISC_INT) == 0) break; switch (stat & 0xff) { @@ -2177,15 +2173,7 @@ qla82xx_msix_default(int irq, void *dev_id) do { if (RD_REG_DWORD(®->host_int)) { stat = RD_REG_DWORD(®->host_status); - if (stat & HSRX_RISC_PAUSED) { - if (pci_channel_offline(ha->pdev)) - break; - - qla_printk(KERN_INFO, ha, "RISC paused\n"); - set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); - qla2xxx_wake_dpc(vha); - break; - } else if ((stat & HSRX_RISC_INT) == 0) + if ((stat & HSRX_RISC_INT) == 0) break; switch (stat & 0xff) { @@ -3348,6 +3336,9 @@ qla82xx_need_reset_handler(scsi_qla_host_t *vha) } dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + qla_printk(KERN_INFO, ha, "3:Device state is 0x%x = %s\n", dev_state, + dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown"); + /* Force to DEV_COLD unless someone else is starting a reset */ if (dev_state != QLA82XX_DEV_INITIALIZING) { qla_printk(KERN_INFO, ha, "HW State: COLD/RE-INIT\n"); @@ -3398,7 +3389,6 @@ int qla82xx_device_state_handler(scsi_qla_host_t *vha) { uint32_t dev_state; - uint32_t drv_active; int rval = QLA_SUCCESS; unsigned long dev_init_timeout; struct qla_hw_data *ha = vha->hw; @@ -3407,38 +3397,9 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha) if (!vha->flags.init_done) qla82xx_set_drv_active(vha); - /* Set cold state*/ - if (!PCI_FUNC(ha->pdev->devfn & 1)) { - - /* Check if other functions alive, else set dev state - * to cold - */ - drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); - drv_active &= ~(1 << (ha->portnum * 4)); - drv_active &= ~(1 << ((ha->portnum + 1) * 4)); - - dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); - if (!drv_active) { - - switch (dev_state) { - case QLA82XX_DEV_COLD: - case QLA82XX_DEV_READY: - case QLA82XX_DEV_INITIALIZING: - case QLA82XX_DEV_NEED_RESET: - case QLA82XX_DEV_NEED_QUIESCENT: - case QLA82XX_DEV_QUIESCENT: - case QLA82XX_DEV_FAILED: - break; - default: - qla_printk(KERN_INFO, ha, - "No other function exist," - " resetting dev state to COLD\n"); - qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, - QLA82XX_DEV_COLD); - break; - } - } - } + dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + qla_printk(KERN_INFO, ha, "1:Device state is 0x%x = %s\n", dev_state, + dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown"); /* wait for 30 seconds for device to go ready */ dev_init_timeout = jiffies + (ha->nx_dev_init_timeout * HZ); @@ -3453,6 +3414,11 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha) break; } dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); + qla_printk(KERN_INFO, ha, + "2:Device state is 0x%x = %s\n", dev_state, + dev_state < MAX_STATES ? + qdev_state[dev_state] : "Unknown"); + switch (dev_state) { case QLA82XX_DEV_READY: goto exit; @@ -3545,12 +3511,14 @@ qla82xx_abort_isp(scsi_qla_host_t *vha) qla82xx_idc_lock(ha); dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); - if (dev_state != QLA82XX_DEV_INITIALIZING) { + if (dev_state == QLA82XX_DEV_READY) { qla_printk(KERN_INFO, ha, "HW State: NEED RESET\n"); qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_NEED_RESET); } else - qla_printk(KERN_INFO, ha, "HW State: DEVICE INITIALIZING\n"); + qla_printk(KERN_INFO, ha, "HW State: %s\n", + dev_state < MAX_STATES ? + qdev_state[dev_state] : "Unknown"); qla82xx_idc_unlock(ha); rval = qla82xx_device_state_handler(vha); @@ -3561,6 +3529,39 @@ qla82xx_abort_isp(scsi_qla_host_t *vha) if (rval == QLA_SUCCESS) qla82xx_restart_isp(vha); + + if (rval) { + vha->flags.online = 1; + if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { + if (ha->isp_abort_cnt == 0) { + qla_printk(KERN_WARNING, ha, + "ISP error recovery failed - " + "board disabled\n"); + /* + * The next call disables the board + * completely. + */ + ha->isp_ops->reset_adapter(vha); + vha->flags.online = 0; + clear_bit(ISP_ABORT_RETRY, + &vha->dpc_flags); + rval = QLA_SUCCESS; + } else { /* schedule another ISP abort */ + ha->isp_abort_cnt--; + DEBUG(qla_printk(KERN_INFO, ha, + "qla%ld: ISP abort - retry remaining %d\n", + vha->host_no, ha->isp_abort_cnt)); + rval = QLA_FUNCTION_FAILED; + } + } else { + ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT; + DEBUG(qla_printk(KERN_INFO, ha, + "(%ld): ISP error recovery - retrying (%d) " + "more times\n", vha->host_no, ha->isp_abort_cnt)); + set_bit(ISP_ABORT_RETRY, &vha->dpc_flags); + rval = QLA_FUNCTION_FAILED; + } + } return rval; } diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h index 7804bbbb3db3..f8f99a5ea532 100644 --- a/drivers/scsi/qla2xxx/qla_nx.h +++ b/drivers/scsi/qla2xxx/qla_nx.h @@ -545,13 +545,14 @@ #define QLA82XX_CRB_DEV_PART_INFO (QLA82XX_CAM_RAM(0x14c)) /* Every driver should use these Device State */ -#define QLA82XX_DEV_COLD 1 -#define QLA82XX_DEV_INITIALIZING 2 -#define QLA82XX_DEV_READY 3 -#define QLA82XX_DEV_NEED_RESET 4 -#define QLA82XX_DEV_NEED_QUIESCENT 5 -#define QLA82XX_DEV_FAILED 6 -#define QLA82XX_DEV_QUIESCENT 7 +#define QLA82XX_DEV_COLD 1 +#define QLA82XX_DEV_INITIALIZING 2 +#define QLA82XX_DEV_READY 3 +#define QLA82XX_DEV_NEED_RESET 4 +#define QLA82XX_DEV_NEED_QUIESCENT 5 +#define QLA82XX_DEV_FAILED 6 +#define QLA82XX_DEV_QUIESCENT 7 +#define MAX_STATES 8 /* Increment if new state added */ #define QLA82XX_IDC_VERSION 1 #define QLA82XX_ROM_DEV_INIT_TIMEOUT 30 -- cgit v1.2.2 From b3667f9177359b0594e4f2cd5cc01115f8c7e2af Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Fri, 7 May 2010 15:18:13 -0700 Subject: [SCSI] libfc: set seq_id for incoming sequence After the recent patch "fixes unnecessary seq id jump" the SCST module fcst stopped working because multi-sequence write data wasn't finding the sequence after the first frame. Add back the setting of the seq_id when the first frame arrives. Also fix indentation on two lines. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index daff880e426e..6addbd6e41e2 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -918,6 +918,7 @@ static enum fc_pf_rjt_reason fc_seq_lookup_recip(struct fc_lport *lport, if (fc_sof_is_init(fr_sof(fp))) { sp = &ep->seq; sp->ssb_stat |= SSB_ST_RESP; + sp->id = fh->fh_seq_id; } else { sp = &ep->seq; if (sp->id != fh->fh_seq_id) { @@ -1322,11 +1323,12 @@ static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) } sof = fr_sof(fp); sp = &ep->seq; - if (fc_sof_is_init(sof)) + if (fc_sof_is_init(sof)) { sp->ssb_stat |= SSB_ST_RESP; - else if (sp->id != fh->fh_seq_id) { - atomic_inc(&mp->stats.seq_not_found); - goto rel; + sp->id = fh->fh_seq_id; + } else if (sp->id != fh->fh_seq_id) { + atomic_inc(&mp->stats.seq_not_found); + goto rel; } f_ctl = ntoh24(fh->fh_f_ctl); -- cgit v1.2.2 From 721cafafb66f57b461226aa197997f3e5b296f91 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 7 May 2010 15:18:19 -0700 Subject: [SCSI] fcoe: fixes wrong error exit in fcoe_create fcoe_create exits using out_nodev label when module is not yet LIVE but this exit path unlocks the rtnl_lock though rtnl lock was not held in this case. So this patch replaces out_nodev with out_nomod to exit w/o unlocking rtnl_lock. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index aba839e68014..7022a16b14f6 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -2056,7 +2056,7 @@ static int fcoe_create(const char *buffer, struct kernel_param *kp) */ if (THIS_MODULE->state != MODULE_STATE_LIVE) { rc = -ENODEV; - goto out_nodev; + goto out_nomod; } #endif -- cgit v1.2.2 From 1b80e0f91c41db4633c0a61f727de169a9e9b275 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 7 May 2010 15:18:24 -0700 Subject: [SCSI] libfc: Remove unused fc_get_host_port_type Remove this unused routine. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 11 ----------- include/scsi/libfc.h | 1 - 2 files changed, 12 deletions(-) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index ef25e11abd33..7159bcfa8ec3 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -243,17 +243,6 @@ static void fc_lport_ptp_setup(struct fc_lport *lport, fc_lport_enter_ready(lport); } -/** - * fc_get_host_port_type() - Return the port type of the given Scsi_Host - * @shost: The SCSI host whose port type is to be determined - */ -void fc_get_host_port_type(struct Scsi_Host *shost) -{ - /* TODO - currently just NPORT */ - fc_host_port_type(shost) = FC_PORTTYPE_NPORT; -} -EXPORT_SYMBOL(fc_get_host_port_type); - /** * fc_get_host_port_state() - Return the port state of the given Scsi_Host * @shost: The SCSI host whose port state is to be determined diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index a26bb50c0c8b..1755fa7e9271 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -1049,7 +1049,6 @@ void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id); * Functions for fc_functions_template */ void fc_get_host_speed(struct Scsi_Host *); -void fc_get_host_port_type(struct Scsi_Host *); void fc_get_host_port_state(struct Scsi_Host *); void fc_set_rport_loss_tmo(struct fc_rport *, u32 timeout); struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *); -- cgit v1.2.2 From d29510a2968f87eaf455c606cd8802b6f8a0774b Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 7 May 2010 15:18:30 -0700 Subject: [SCSI] libfc: Remove extra pointer check The fcf pointer is checked again after this verification making the first check redundant. Remote the first check. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index aadd24962e92..ec4c88c2d131 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -948,8 +948,7 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, u32 desc_mask; LIBFCOE_FIP_DBG(fip, "Clear Virtual Link received\n"); - if (!fcf) - return; + if (!fcf || !fc_host_port_id(lport->host)) return; -- cgit v1.2.2 From 5e4f8fe7b58f4da5043b7f219fe9193cddd9262e Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 7 May 2010 15:18:35 -0700 Subject: [SCSI] fcoe: move link speed checking into its own routine It doesn't make sense to update the link speed in the is_link_ok() routine. Move it to it's own routine and acquire the device speed when we're configuring the device initially as well as if there are any netdev events received. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 42 +++++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 7022a16b14f6..4834d3c130d6 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -74,6 +74,7 @@ static int fcoe_rcv(struct sk_buff *, struct net_device *, static int fcoe_percpu_receive_thread(void *); static void fcoe_clean_pending_queue(struct fc_lport *); static void fcoe_percpu_clean(struct fc_lport *); +static int fcoe_link_speed_update(struct fc_lport *); static int fcoe_link_ok(struct fc_lport *); static struct fc_lport *fcoe_hostlist_lookup(const struct net_device *); @@ -631,6 +632,8 @@ static int fcoe_netdev_config(struct fc_lport *lport, struct net_device *netdev) port->fcoe_pending_queue_active = 0; setup_timer(&port->timer, fcoe_queue_timer, (unsigned long)lport); + fcoe_link_speed_update(lport); + if (!lport->vport) { /* * Use NAA 1&2 (FC-FS Rev. 2.0, Sec. 15) to generate WWNN/WWPN: @@ -1829,6 +1832,9 @@ static int fcoe_device_notification(struct notifier_block *notifier, FCOE_NETDEV_DBG(netdev, "Unknown event %ld " "from netdev netlink\n", event); } + + fcoe_link_speed_update(lport); + if (link_possible && !fcoe_link_ok(lport)) fcoe_ctlr_link_up(&fcoe->ctlr); else if (fcoe_ctlr_link_down(&fcoe->ctlr)) { @@ -2128,26 +2134,19 @@ out_nomod: } /** - * fcoe_link_ok() - Check if the link is OK for a local port - * @lport: The local port to check link on - * - * Any permanently-disqualifying conditions have been previously checked. - * This also updates the speed setting, which may change with link for 100/1000. - * - * This function should probably be checking for PAUSE support at some point - * in the future. Currently Per-priority-pause is not determinable using - * ethtool, so we shouldn't be restrictive until that problem is resolved. - * - * Returns: 0 if link is OK for use by FCoE. + * fcoe_link_speed_update() - Update the supported and actual link speeds + * @lport: The local port to update speeds for * + * Returns: 0 if the ethtool query was successful + * -1 if the ethtool query failed */ -int fcoe_link_ok(struct fc_lport *lport) +int fcoe_link_speed_update(struct fc_lport *lport) { struct fcoe_port *port = lport_priv(lport); struct net_device *netdev = port->fcoe->netdev; struct ethtool_cmd ecmd = { ETHTOOL_GSET }; - if (netif_oper_up(netdev) && !dev_ethtool_get_settings(netdev, &ecmd)) { + if (!dev_ethtool_get_settings(netdev, &ecmd)) { lport->link_supported_speeds &= ~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT); if (ecmd.supported & (SUPPORTED_1000baseT_Half | @@ -2166,6 +2165,23 @@ int fcoe_link_ok(struct fc_lport *lport) return -1; } +/** + * fcoe_link_ok() - Check if the link is OK for a local port + * @lport: The local port to check link on + * + * Returns: 0 if link is UP and OK, -1 if not + * + */ +int fcoe_link_ok(struct fc_lport *lport) +{ + struct fcoe_port *port = lport_priv(lport); + struct net_device *netdev = port->fcoe->netdev; + + if (netif_oper_up(netdev)) + return 0; + return -1; +} + /** * fcoe_percpu_clean() - Clear all pending skbs for an local port * @lport: The local port whose skbs are to be cleared -- cgit v1.2.2 From 7b2787ec15b9d1c2f716da61b0eec21a3f5e6520 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 7 May 2010 15:18:41 -0700 Subject: [SCSI] libfc: Move the port_id into lport This patch creates a port_id member in struct fc_lport. This allows libfc to just deal with fc_lport instances instead of calling into the fc_host to get the port_id. This change helps in only using symbols necessary for operation from the libfc structures. libfc still needs to change the fc_host_port_id() if the port_id changes so the presentation layer (scsi_transport_fc) can provide the user with the correct value, but libfc shouldn't rely on the presentation layer for operational values. Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 9 ++++----- drivers/scsi/libfc/fc_disc.c | 2 +- drivers/scsi/libfc/fc_elsct.c | 2 +- drivers/scsi/libfc/fc_exch.c | 2 +- drivers/scsi/libfc/fc_fcp.c | 14 +++++++------- drivers/scsi/libfc/fc_libfc.h | 2 +- drivers/scsi/libfc/fc_lport.c | 16 ++++++++++------ drivers/scsi/libfc/fc_npiv.c | 4 ++-- include/scsi/fc_encode.h | 18 +++++++----------- include/scsi/libfc.h | 2 ++ 10 files changed, 36 insertions(+), 35 deletions(-) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index ec4c88c2d131..948364a3342f 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -343,7 +343,7 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip, fcf = fip->sel_fcf; lp = fip->lp; - if (!fcf || !fc_host_port_id(lp->host)) + if (!fcf || !lp->port_id) return; len = sizeof(*kal) + ports * sizeof(*vn); @@ -374,7 +374,7 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip, vn->fd_desc.fip_dtype = FIP_DT_VN_ID; vn->fd_desc.fip_dlen = sizeof(*vn) / FIP_BPW; memcpy(vn->fd_mac, fip->get_src_addr(lport), ETH_ALEN); - hton24(vn->fd_fc_id, fc_host_port_id(lp->host)); + hton24(vn->fd_fc_id, lp->port_id); put_unaligned_be64(lp->wwpn, &vn->fd_wwpn); } skb_put(skb, len); @@ -949,7 +949,7 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, LIBFCOE_FIP_DBG(fip, "Clear Virtual Link received\n"); - if (!fcf || !fc_host_port_id(lport->host)) + if (!fcf || !lport->port_id) return; /* @@ -987,8 +987,7 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, if (compare_ether_addr(vp->fd_mac, fip->get_src_addr(lport)) == 0 && get_unaligned_be64(&vp->fd_wwpn) == lport->wwpn && - ntoh24(vp->fd_fc_id) == - fc_host_port_id(lport->host)) + ntoh24(vp->fd_fc_id) == lport->port_id) desc_mask &= ~BIT(FIP_DT_VN_ID); break; default: diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index b292272d296f..c7985da88099 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -440,7 +440,7 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len) ids.port_id = ntoh24(np->fp_fid); ids.port_name = ntohll(np->fp_wwpn); - if (ids.port_id != fc_host_port_id(lport->host) && + if (ids.port_id != lport->port_id && ids.port_name != lport->wwpn) { rdata = lport->tt.rport_create(lport, ids.port_id); if (rdata) { diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c index 53748724f2c5..e9412b710fab 100644 --- a/drivers/scsi/libfc/fc_elsct.c +++ b/drivers/scsi/libfc/fc_elsct.c @@ -63,7 +63,7 @@ struct fc_seq *fc_elsct_send(struct fc_lport *lport, u32 did, return NULL; } - fc_fill_fc_hdr(fp, r_ctl, did, fc_host_port_id(lport->host), fh_type, + fc_fill_fc_hdr(fp, r_ctl, did, lport->port_id, fh_type, FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); return lport->tt.exch_seq_send(lport, fp, resp, NULL, arg, timer_msec); diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 6addbd6e41e2..104e0fba7c43 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1927,7 +1927,7 @@ static void fc_exch_rrq(struct fc_exch *ep) did = ep->sid; fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, did, - fc_host_port_id(lport->host), FC_TYPE_ELS, + lport->port_id, FC_TYPE_ELS, FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); if (fc_exch_seq_send(lport, fp, fc_exch_rrq_resp, NULL, ep, diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 81a7c976b373..ec1f66c4a9d4 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -490,7 +490,7 @@ crc_err: if (stats->InvalidCRCCount++ < 5) printk(KERN_WARNING "libfc: CRC error on data " "frame for port (%6.6x)\n", - fc_host_port_id(lport->host)); + lport->port_id); put_cpu(); /* * Assume the frame is total garbage. @@ -1109,7 +1109,7 @@ static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp, rpriv = rport->dd_data; fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id, - fc_host_port_id(rpriv->local_port->host), FC_TYPE_FCP, + rpriv->local_port->port_id, FC_TYPE_FCP, FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy, @@ -1382,7 +1382,7 @@ static void fc_fcp_rec(struct fc_fcp_pkt *fsp) fr_seq(fp) = fsp->seq_ptr; fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id, - fc_host_port_id(rpriv->local_port->host), FC_TYPE_ELS, + rpriv->local_port->port_id, FC_TYPE_ELS, FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC, fc_fcp_rec_resp, fsp, @@ -1640,7 +1640,7 @@ static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset) srr->srr_rel_off = htonl(offset); fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id, - fc_host_port_id(rpriv->local_port->host), FC_TYPE_FCP, + rpriv->local_port->port_id, FC_TYPE_FCP, FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL, @@ -2101,12 +2101,12 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) if (fc_fcp_lport_queue_ready(lport)) { shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded " - "on port (%6.6x)\n", fc_host_port_id(lport->host)); + "on port (%6.6x)\n", lport->port_id); return SUCCESS; } else { shost_printk(KERN_INFO, shost, "libfc: Host reset failed, " "port (%6.6x) is not ready.\n", - fc_host_port_id(lport->host)); + lport->port_id); return FAILED; } } @@ -2191,7 +2191,7 @@ void fc_fcp_destroy(struct fc_lport *lport) if (!list_empty(&si->scsi_pkt_queue)) printk(KERN_ERR "libfc: Leaked SCSI packets when destroying " - "port (%6.6x)\n", fc_host_port_id(lport->host)); + "port (%6.6x)\n", lport->port_id); mempool_destroy(si->scsi_pkt_pool); kfree(si); diff --git a/drivers/scsi/libfc/fc_libfc.h b/drivers/scsi/libfc/fc_libfc.h index efc6b3fe6f35..f5c0ca4b6ef8 100644 --- a/drivers/scsi/libfc/fc_libfc.h +++ b/drivers/scsi/libfc/fc_libfc.h @@ -47,7 +47,7 @@ extern unsigned int fc_debug_logging; FC_CHECK_LOGGING(FC_LPORT_LOGGING, \ printk(KERN_INFO "host%u: lport %6.6x: " fmt, \ (lport)->host->host_no, \ - fc_host_port_id((lport)->host), ##args)) + (lport)->port_id, ##args)) #define FC_DISC_DBG(disc, fmt, args...) \ FC_CHECK_LOGGING(FC_DISC_LOGGING, \ diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 7159bcfa8ec3..79c9e3ccd341 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -565,7 +565,7 @@ void __fc_linkup(struct fc_lport *lport) void fc_linkup(struct fc_lport *lport) { printk(KERN_INFO "host%d: libfc: Link up on port (%6.6x)\n", - lport->host->host_no, fc_host_port_id(lport->host)); + lport->host->host_no, lport->port_id); mutex_lock(&lport->lp_mutex); __fc_linkup(lport); @@ -595,7 +595,7 @@ void __fc_linkdown(struct fc_lport *lport) void fc_linkdown(struct fc_lport *lport) { printk(KERN_INFO "host%d: libfc: Link down on port (%6.6x)\n", - lport->host->host_no, fc_host_port_id(lport->host)); + lport->host->host_no, lport->port_id); mutex_lock(&lport->lp_mutex); __fc_linkdown(lport); @@ -697,7 +697,7 @@ void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event) case DISC_EV_FAILED: printk(KERN_ERR "host%d: libfc: " "Discovery failed for port (%6.6x)\n", - lport->host->host_no, fc_host_port_id(lport->host)); + lport->host->host_no, lport->port_id); mutex_lock(&lport->lp_mutex); fc_lport_enter_reset(lport); mutex_unlock(&lport->lp_mutex); @@ -745,7 +745,11 @@ static void fc_lport_set_port_id(struct fc_lport *lport, u32 port_id, printk(KERN_INFO "host%d: Assigned Port ID %6.6x\n", lport->host->host_no, port_id); + lport->port_id = port_id; + + /* Update the fc_host */ fc_host_port_id(lport->host) = port_id; + if (lport->tt.lport_set_port_id) lport->tt.lport_set_port_id(lport, port_id, fp); } @@ -950,7 +954,7 @@ static void fc_lport_reset_locked(struct fc_lport *lport) lport->tt.exch_mgr_reset(lport, 0, 0); fc_host_fabric_name(lport->host) = 0; - if (fc_host_port_id(lport->host)) + if (lport->port_id) fc_lport_set_port_id(lport, 0, NULL); } @@ -1695,7 +1699,7 @@ static int fc_lport_els_request(struct fc_bsg_job *job, fh = fc_frame_header_get(fp); fh->fh_r_ctl = FC_RCTL_ELS_REQ; hton24(fh->fh_d_id, did); - hton24(fh->fh_s_id, fc_host_port_id(lport->host)); + hton24(fh->fh_s_id, lport->port_id); fh->fh_type = FC_TYPE_ELS; hton24(fh->fh_f_ctl, FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT); @@ -1755,7 +1759,7 @@ static int fc_lport_ct_request(struct fc_bsg_job *job, fh = fc_frame_header_get(fp); fh->fh_r_ctl = FC_RCTL_DD_UNSOL_CTL; hton24(fh->fh_d_id, did); - hton24(fh->fh_s_id, fc_host_port_id(lport->host)); + hton24(fh->fh_s_id, lport->port_id); fh->fh_type = FC_TYPE_CT; hton24(fh->fh_f_ctl, FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT); diff --git a/drivers/scsi/libfc/fc_npiv.c b/drivers/scsi/libfc/fc_npiv.c index 45b6f1e2df92..dd2b43bb1c70 100644 --- a/drivers/scsi/libfc/fc_npiv.c +++ b/drivers/scsi/libfc/fc_npiv.c @@ -69,7 +69,7 @@ struct fc_lport *fc_vport_id_lookup(struct fc_lport *n_port, u32 port_id) struct fc_lport *lport = NULL; struct fc_lport *vn_port; - if (fc_host_port_id(n_port->host) == port_id) + if (n_port->port_id == port_id) return n_port; if (port_id == FC_FID_FLOGI) @@ -77,7 +77,7 @@ struct fc_lport *fc_vport_id_lookup(struct fc_lport *n_port, u32 port_id) mutex_lock(&n_port->lp_mutex); list_for_each_entry(vn_port, &n_port->vports, list) { - if (fc_host_port_id(vn_port->host) == port_id) { + if (vn_port->port_id == port_id) { lport = vn_port; break; } diff --git a/include/scsi/fc_encode.h b/include/scsi/fc_encode.h index 8eb0a0fc0a71..9b4867c9c2d2 100644 --- a/include/scsi/fc_encode.h +++ b/include/scsi/fc_encode.h @@ -74,7 +74,7 @@ static inline void fc_adisc_fill(struct fc_lport *lport, struct fc_frame *fp) adisc->adisc_cmd = ELS_ADISC; put_unaligned_be64(lport->wwpn, &adisc->adisc_wwpn); put_unaligned_be64(lport->wwnn, &adisc->adisc_wwnn); - hton24(adisc->adisc_port_id, fc_host_port_id(lport->host)); + hton24(adisc->adisc_port_id, lport->port_id); } /** @@ -127,15 +127,13 @@ static inline int fc_ct_fill(struct fc_lport *lport, case FC_NS_RFT_ID: ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rft)); - hton24(ct->payload.rft.fid.fp_fid, - fc_host_port_id(lport->host)); + hton24(ct->payload.rft.fid.fp_fid, lport->port_id); ct->payload.rft.fts = lport->fcts; break; case FC_NS_RFF_ID: ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rff_id)); - hton24(ct->payload.rff.fr_fid.fp_fid, - fc_host_port_id(lport->host)); + hton24(ct->payload.rff.fr_fid.fp_fid, lport->port_id); ct->payload.rff.fr_type = FC_TYPE_FCP; if (lport->service_params & FCP_SPPF_INIT_FCN) ct->payload.rff.fr_feat = FCP_FEAT_INIT; @@ -145,16 +143,14 @@ static inline int fc_ct_fill(struct fc_lport *lport, case FC_NS_RNN_ID: ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rn_id)); - hton24(ct->payload.rn.fr_fid.fp_fid, - fc_host_port_id(lport->host)); + hton24(ct->payload.rn.fr_fid.fp_fid, lport->port_id); put_unaligned_be64(lport->wwnn, &ct->payload.rn.fr_wwn); break; case FC_NS_RSPN_ID: len = strnlen(fc_host_symbolic_name(lport->host), 255); ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rspn) + len); - hton24(ct->payload.spn.fr_fid.fp_fid, - fc_host_port_id(lport->host)); + hton24(ct->payload.spn.fr_fid.fp_fid, lport->port_id); strncpy(ct->payload.spn.fr_name, fc_host_symbolic_name(lport->host), len); ct->payload.spn.fr_name_len = len; @@ -268,7 +264,7 @@ static inline void fc_logo_fill(struct fc_lport *lport, struct fc_frame *fp) logo = fc_frame_payload_get(fp, sizeof(*logo)); memset(logo, 0, sizeof(*logo)); logo->fl_cmd = ELS_LOGO; - hton24(logo->fl_n_port_id, fc_host_port_id(lport->host)); + hton24(logo->fl_n_port_id, lport->port_id); logo->fl_n_port_wwn = htonll(lport->wwpn); } @@ -295,7 +291,7 @@ static inline void fc_rec_fill(struct fc_lport *lport, struct fc_frame *fp) rec = fc_frame_payload_get(fp, sizeof(*rec)); memset(rec, 0, sizeof(*rec)); rec->rec_cmd = ELS_REC; - hton24(rec->rec_s_id, fc_host_port_id(lport->host)); + hton24(rec->rec_s_id, lport->port_id); rec->rec_ox_id = htons(ep->oxid); rec->rec_rx_id = htons(ep->rxid); } diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 1755fa7e9271..7495c0ba67ee 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -780,6 +780,7 @@ struct fc_disc { * @dev_stats: FCoE device stats (TODO: libfc should not be * FCoE aware) * @retry_count: Number of retries in the current state + * @port_id: FC Port ID * @wwpn: World Wide Port Name * @wwnn: World Wide Node Name * @service_params: Common service parameters @@ -826,6 +827,7 @@ struct fc_lport { u8 retry_count; /* Fabric information */ + u32 port_id; u64 wwpn; u64 wwnn; unsigned int service_params; -- cgit v1.2.2 From 34ce27bcf96f5f366e1fa8c4729ffc8a55de4cc3 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 7 May 2010 15:18:46 -0700 Subject: [SCSI] fcoe: fix a circular locking issue with rtnl and sysfs mutex Currently rtnl mutex is grabbed during fcoe create, destroy, enable and disable operations while sysfs s_active read mutex is already held, but simultaneously other networking events could try grabbing write s_active mutex while rtnl is already held and that is causing circular lock warning, its detailed log pasted at end. In this log, the rtnl was held before write s_active during device renaming but there are more such cases as Joe reported another instance with tg3 open at:- http://www.open-fcoe.org/pipermail/devel/2010-February/008263.html This patch fixes this issue by not waiting for rtnl mutex during fcoe ops, that means if rtnl mutex is not immediately available then restart_syscall() to allow others waiting in line to grab s_active along with rtnl mutex to finish their work first under these mutex. Currently rtnl mutex was grabbed twice during fcoe_destroy call flow, second grab was from fcoe_if_destroy called from fcoe_destroy after dropping rtnl mutex before calling fcoe_if_destroy, so instead made fcoe_if_destroy always called with rtnl mutex held to have this mutex grabbed only once in this code path. However left matching rtnl_unlock as-is in its original place as it was dropped there for good reason since very next call causes synchronous fip worker flush and if rtnl mutex is still held before flush then that would cause new circular warning between fip->recv_work and rtnl mutex, I've added detailed comment for this on fcoe_if_destroy calling and rtnl muxtes unlocking. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.33.1linux-stable-2.6.33 #1 ------------------------------------------------------- fcoemon/18823 is trying to acquire lock: (fcoe_config_mutex){+.+.+.}, at: [] fcoe_create+0x27/0x4f7 [fcoe] but task is already holding lock: (s_active){++++.+}, at: [] sysfs_get_active_two+0x31/0x48 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (s_active){++++.+}: [] __lock_acquire+0xb73/0xd2b [] lock_acquire+0xcd/0xf1 [] sysfs_deactivate+0x8b/0xe0 [] sysfs_addrm_finish+0x36/0x55 [] sysfs_hash_and_remove+0x53/0x6a [] sysfs_remove_link+0x21/0x23 [] device_rename+0x99/0xcb [] dev_change_name+0xd5/0x1d2 [] dev_ifsioc+0x201/0x2ac [] dev_ioctl+0x521/0x632 [] sock_do_ioctl+0x3d/0x47 [] sock_ioctl+0x213/0x222 [] vfs_ioctl+0x32/0xa6 [] do_vfs_ioctl+0x490/0x4d6 [] sys_ioctl+0x56/0x79 [] system_call_fastpath+0x16/0x1b -> #1 (rtnl_mutex){+.+.+.}: [] __lock_acquire+0xb73/0xd2b [] lock_acquire+0xcd/0xf1 [] __mutex_lock_common+0x4b/0x383 [] mutex_lock_nested+0x3e/0x43 [] rtnl_lock+0x17/0x19 [] register_netdevice_notifier+0x1e/0x19b [] 0xffffffffa02580c1 [] do_one_initcall+0x5e/0x15e [] sys_init_module+0xd8/0x23a [] system_call_fastpath+0x16/0x1b -> #0 (fcoe_config_mutex){+.+.+.}: [] __lock_acquire+0xa1d/0xd2b [] lock_acquire+0xcd/0xf1 [] __mutex_lock_common+0x4b/0x383 [] mutex_lock_nested+0x3e/0x43 [] fcoe_create+0x27/0x4f7 [fcoe] [] param_attr_store+0x27/0x35 [] module_attr_store+0x26/0x2a [] sysfs_write_file+0x108/0x144 [] vfs_write+0xae/0x10b [] sys_write+0x4a/0x6e [] system_call_fastpath+0x16/0x1b other info that might help us debug this: 3 locks held by fcoemon/18823: #0: (&buffer->mutex){+.+.+.}, at: [] sysfs_write_file+0x3c/0x144 #1: (s_active){++++.+}, at: [] sysfs_get_active_two+0x24/0x48 #2: (s_active){++++.+}, at: [] sysfs_get_active_two+0x31/0x48 stack backtrace: Pid: 18823, comm: fcoemon Tainted: G W 2.6.33.1linux-stable-2.6.33 #1 Call Trace: [] print_circular_bug+0xa8/0xb6 [] __lock_acquire+0xa1d/0xd2b [] ? fcoe_create+0x27/0x4f7 [fcoe] [] lock_acquire+0xcd/0xf1 [] ? fcoe_create+0x27/0x4f7 [fcoe] [] ? fcoe_create+0x27/0x4f7 [fcoe] [] __mutex_lock_common+0x4b/0x383 [] ? fcoe_create+0x27/0x4f7 [fcoe] [] ? cpu_clock+0x43/0x5e [] ? lockstat_clock+0x11/0x13 [] ? lock_release_holdtime+0x2c/0x127 [] ? sysfs_get_active_two+0x31/0x48 [] mutex_lock_nested+0x3e/0x43 [] fcoe_create+0x27/0x4f7 [fcoe] [] param_attr_store+0x27/0x35 [] module_attr_store+0x26/0x2a [] sysfs_write_file+0x108/0x144 [] vfs_write+0xae/0x10b [] ? trace_hardirqs_on_caller+0x125/0x150 [] sys_write+0x4a/0x6e [] system_call_fastpath+0x16/0x1b Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 41 ++++++++++++++++++++++++++++++++++------- 1 file changed, 34 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 4834d3c130d6..0c825c0944f7 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -801,6 +801,12 @@ skip_oem: /** * fcoe_if_destroy() - Tear down a SW FCoE instance * @lport: The local port to be destroyed + * + * Locking: must be called with the RTNL mutex held and RTNL mutex + * needed to be dropped by this function since not dropping RTNL + * would cause circular locking warning on synchronous fip worker + * cancelling thru fcoe_interface_put invoked by this function. + * */ static void fcoe_if_destroy(struct fc_lport *lport) { @@ -823,7 +829,6 @@ static void fcoe_if_destroy(struct fc_lport *lport) /* Free existing transmit skbs */ fcoe_clean_pending_queue(lport); - rtnl_lock(); if (!is_zero_ether_addr(port->data_src_addr)) dev_unicast_delete(netdev, port->data_src_addr); rtnl_unlock(); @@ -1902,7 +1907,12 @@ static int fcoe_disable(const char *buffer, struct kernel_param *kp) goto out_nodev; } - rtnl_lock(); + if (!rtnl_trylock()) { + dev_put(netdev); + mutex_unlock(&fcoe_config_mutex); + return restart_syscall(); + } + fcoe = fcoe_hostlist_lookup_port(netdev); rtnl_unlock(); @@ -1952,7 +1962,12 @@ static int fcoe_enable(const char *buffer, struct kernel_param *kp) goto out_nodev; } - rtnl_lock(); + if (!rtnl_trylock()) { + dev_put(netdev); + mutex_unlock(&fcoe_config_mutex); + return restart_syscall(); + } + fcoe = fcoe_hostlist_lookup_port(netdev); rtnl_unlock(); @@ -2003,7 +2018,12 @@ static int fcoe_destroy(const char *buffer, struct kernel_param *kp) goto out_nodev; } - rtnl_lock(); + if (!rtnl_trylock()) { + dev_put(netdev); + mutex_unlock(&fcoe_config_mutex); + return restart_syscall(); + } + fcoe = fcoe_hostlist_lookup_port(netdev); if (!fcoe) { rtnl_unlock(); @@ -2012,7 +2032,7 @@ static int fcoe_destroy(const char *buffer, struct kernel_param *kp) } list_del(&fcoe->list); fcoe_interface_cleanup(fcoe); - rtnl_unlock(); + /* RTNL mutex is dropped by fcoe_if_destroy */ fcoe_if_destroy(fcoe->ctlr.lp); module_put(THIS_MODULE); @@ -2033,6 +2053,8 @@ static void fcoe_destroy_work(struct work_struct *work) port = container_of(work, struct fcoe_port, destroy_work); mutex_lock(&fcoe_config_mutex); + rtnl_lock(); + /* RTNL mutex is dropped by fcoe_if_destroy */ fcoe_if_destroy(port->lport); mutex_unlock(&fcoe_config_mutex); } @@ -2054,6 +2076,12 @@ static int fcoe_create(const char *buffer, struct kernel_param *kp) struct net_device *netdev; mutex_lock(&fcoe_config_mutex); + + if (!rtnl_trylock()) { + mutex_unlock(&fcoe_config_mutex); + return restart_syscall(); + } + #ifdef CONFIG_FCOE_MODULE /* * Make sure the module has been initialized, and is not about to be @@ -2071,7 +2099,6 @@ static int fcoe_create(const char *buffer, struct kernel_param *kp) goto out_nomod; } - rtnl_lock(); netdev = fcoe_if_to_netdev(buffer); if (!netdev) { rc = -ENODEV; @@ -2126,9 +2153,9 @@ out_free: out_putdev: dev_put(netdev); out_nodev: - rtnl_unlock(); module_put(THIS_MODULE); out_nomod: + rtnl_unlock(); mutex_unlock(&fcoe_config_mutex); return rc; } -- cgit v1.2.2 From 8b889e4f95545241fe90aa426ce9b7395d13ae06 Mon Sep 17 00:00:00 2001 From: Kaladhar Musunuru Date: Fri, 7 May 2010 15:18:52 -0700 Subject: [SCSI] libfcoe: Fix incorrect MAC address clearing Fix typo in memset. Incorrect length parameter to memset resulting non-zero MAC address in FPMA messages. Signed-off-by: Kaladhar Musunuru Acked-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 948364a3342f..080e4eca65be 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -439,7 +439,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport, cap->encaps.fd_desc.fip_dlen = dlen / FIP_BPW; mac = (struct fip_mac_desc *)skb_put(skb, sizeof(*mac)); - memset(mac, 0, sizeof(mac)); + memset(mac, 0, sizeof(*mac)); mac->fd_desc.fip_dtype = FIP_DT_MAC; mac->fd_desc.fip_dlen = sizeof(*mac) / FIP_BPW; if (dtype != FIP_DT_FLOGI && dtype != FIP_DT_FDISC) { -- cgit v1.2.2 From fb83153d7308e1344f1d4a2e287b6aaab2f6d14c Mon Sep 17 00:00:00 2001 From: Kaladhar Musunuru Date: Fri, 7 May 2010 15:18:57 -0700 Subject: [SCSI] libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn All VNports are sending FIP Keep-Alive messages with port_id and wwpn of the parent host instead of it's own port_id and wwpn. Standard FIP descriptor type 11 indicates to send own port_id and port_name. Signed-off-by: Kaladhar Musunuru Acked-by: Joe Eykholt Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/libfcoe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c index 080e4eca65be..50aaa4bcfc50 100644 --- a/drivers/scsi/fcoe/libfcoe.c +++ b/drivers/scsi/fcoe/libfcoe.c @@ -374,8 +374,8 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip, vn->fd_desc.fip_dtype = FIP_DT_VN_ID; vn->fd_desc.fip_dlen = sizeof(*vn) / FIP_BPW; memcpy(vn->fd_mac, fip->get_src_addr(lport), ETH_ALEN); - hton24(vn->fd_fc_id, lp->port_id); - put_unaligned_be64(lp->wwpn, &vn->fd_wwpn); + hton24(vn->fd_fc_id, lport->port_id); + put_unaligned_be64(lport->wwpn, &vn->fd_wwpn); } skb_put(skb, len); skb->protocol = htons(ETH_P_FIP); -- cgit v1.2.2 From 15af974dcb22914f29aeb9a9cac5879b0dc3860e Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 7 May 2010 15:19:03 -0700 Subject: [SCSI] fcoe: fix fcoe module ref counting Currently fcoe module ref count is used for tracking active fcoe instances, it means each fcoe instance create increments the count while destroy dec the count. The dec is done only if fcoe instance is destroyed from /sysfs but not if destroyed due to NETDEV_UNREGISTER event. So this patch moves only module_put doing dec to common fcoe_if_destroy function, so that dec would occur on ever fcoe instance destroy. Signed-off-by: Vasu Dev Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 0c825c0944f7..ba75a98c960c 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -851,6 +851,7 @@ static void fcoe_if_destroy(struct fc_lport *lport) /* Release the Scsi_Host */ scsi_host_put(lport->host); + module_put(THIS_MODULE); } /** @@ -2034,7 +2035,6 @@ static int fcoe_destroy(const char *buffer, struct kernel_param *kp) fcoe_interface_cleanup(fcoe); /* RTNL mutex is dropped by fcoe_if_destroy */ fcoe_if_destroy(fcoe->ctlr.lp); - module_put(THIS_MODULE); out_putdev: dev_put(netdev); -- cgit v1.2.2 From 5ca05594097438f81337e53ad50c2d17ffc28238 Mon Sep 17 00:00:00 2001 From: "Rajashekhara, Mahesh" Date: Mon, 10 May 2010 04:05:50 -0700 Subject: [SCSI] aacraid: respond automatically to volumes added by config tool Problem description: -------------------- When the JBOD is created from the OS using Adaptec Storage Manager utility device is not available under FDISK until a system restart is done. Solution: --------- AIF handling: If there is a JBOD drive added to the system, identify the old one with scsi_device_lookup() and remove it to enable a fresh scsi_add_device(); else the new JBOD is not available until reboot. Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aacraid.h | 2 +- drivers/scsi/aacraid/commsup.c | 10 ++++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 619c02d9c862..9f985267c30f 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 24702 +# define AAC_DRIVER_BUILD 26000 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 94d2954d79ae..69692b050e3c 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -966,6 +966,16 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) device_config_needed = (((__le32 *)aifcmd->data)[0] == cpu_to_le32(AifEnAddJBOD)) ? ADD : DELETE; + if (device_config_needed == ADD) { + device = scsi_device_lookup(dev->scsi_host_ptr, + channel, + id, + lun); + if (device) { + scsi_remove_device(device); + scsi_device_put(device); + } + } break; case AifEnEnclosureManagement: -- cgit v1.2.2 From e3cc268fe4a0ad1cbefbc53cee35c80281e609b8 Mon Sep 17 00:00:00 2001 From: "Rajashekhara, Mahesh" Date: Mon, 10 May 2010 04:12:28 -0700 Subject: [SCSI] aacraid: expose physical devices for models with newer firmware The default driver setting is "expose_physicals=0", which means raw physical drives are not exposed to OS. If the user wants to expose connected physical drives, enable "expose_physicals" module parameter. With the new JBOD firmware, physical drives are not available for "expose_physicals>0". In function "aac_expose_phy_device", modified to reset the appropriate bit in the first byte of inquiry data. This fix exposes the connected physical drives. Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 7e26ebc26661..24b1ba06ece4 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -328,6 +328,16 @@ int aac_get_config_status(struct aac_dev *dev, int commit_flag) return status; } +static void aac_expose_phy_device(struct scsi_cmnd *scsicmd) +{ + char inq_data; + scsi_sg_copy_to_buffer(scsicmd, &inq_data, sizeof(inq_data)); + if ((inq_data & 0x20) && (inq_data & 0x1f) == TYPE_DISK) { + inq_data &= 0xdf; + scsi_sg_copy_from_buffer(scsicmd, &inq_data, sizeof(inq_data)); + } +} + /** * aac_get_containers - list containers * @common: adapter to probe @@ -2573,6 +2583,11 @@ static void aac_srb_callback(void *context, struct fib * fibptr) scsi_dma_unmap(scsicmd); + /* expose physical device if expose_physicald flag is on */ + if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01) + && expose_physicals > 0) + aac_expose_phy_device(scsicmd); + /* * First check the fib status */ -- cgit v1.2.2 From 1fc8010a5d9a27391db2be103b13f4ac80990cfc Mon Sep 17 00:00:00 2001 From: "Rajashekhara, Mahesh" Date: Mon, 10 May 2010 04:17:57 -0700 Subject: [SCSI] aacraid: add support for handling ATA pass-through commands. There are two conditions for ATA pass thru command that falls into 'SRB_STATUS_ERROR' condition. 1. When the "CC" bit is set by the host in ATA pass-through CDB - Even for the successful completion, SCSI target shall generate check condition. - Driver returns a result code of SAM_STAT_CHECK_CONDITION, with a driver byte of DID_OK to the mid layer. Below is the snippet of existing code which fills a result code of SAM_STAT_CHECK_CONDITION: *********************************** if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) { int len; scsicmd->result |= SAM_STAT_CHECK_CONDITION; .......... ************************************ 2. When the "CC" bit is reset by the host and if SCSI target generates a check condition when an error occurs. - Driver returns a result code of SAM_STAT_CHECK_CONDITION, with a driver byte of DID_ERROR to the mid layer. Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 24b1ba06ece4..fdc7d9935aeb 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -2693,8 +2693,22 @@ static void aac_srb_callback(void *context, struct fib * fibptr) scsicmd->cmnd[0], le32_to_cpu(srbreply->scsi_status)); #endif - scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8; - break; + if ((scsicmd->cmnd[0] == ATA_12) + || (scsicmd->cmnd[0] == ATA_16)) { + if (scsicmd->cmnd[2] & (0x01 << 5)) { + scsicmd->result = DID_OK << 16 + | COMMAND_COMPLETE << 8; + break; + } else { + scsicmd->result = DID_ERROR << 16 + | COMMAND_COMPLETE << 8; + break; + } + } else { + scsicmd->result = DID_ERROR << 16 + | COMMAND_COMPLETE << 8; + break; + } } if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) { int len; -- cgit v1.2.2 From da3cc679b247a22efe0746d129074015b278e64d Mon Sep 17 00:00:00 2001 From: "Rajashekhara, Mahesh" Date: Mon, 10 May 2010 04:24:01 -0700 Subject: [SCSI] aacraid: prohibit access to array container space Problem description: -------------------- The issue reported by one of the customer was able to read LBA beyond the array reported size with "sg_read" utility. If N is the last block address reported, then should not be able to read past N, i.e. N+1. But in their case, reported last LBA=143134719. So should not have been able to read with LBA=143134720, but it is read without failure, which means reported size to the OS is not correct and is less than the actual last block address. Solution: --------- Firmware layer exposes lesser container capacity than the actual one. It exposes [Actual size - Spitfire space(10MB)] to the OS, IO's to the 10MB should be prohibited from the Linux driver. Driver checks LBA boundary, if its greater than the array reported size then sets sensekey to HARDWARE_ERROR and sends the notification to the MID layer. Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index fdc7d9935aeb..7df2dd1d2c6f 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1608,6 +1608,7 @@ static int aac_read(struct scsi_cmnd * scsicmd) int status; struct aac_dev *dev; struct fib * cmd_fibcontext; + int cid; dev = (struct aac_dev *)scsicmd->device->host->hostdata; /* @@ -1657,6 +1658,22 @@ static int aac_read(struct scsi_cmnd * scsicmd) count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; break; } + + if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) { + cid = scmd_id(scsicmd); + dprintk((KERN_DEBUG "aacraid: Illegal lba\n")); + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | + SAM_STAT_CHECK_CONDITION; + set_sense(&dev->fsa_dev[cid].sense_data, + HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE, + ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0); + memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, + min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); + scsicmd->scsi_done(scsicmd); + return 1; + } + dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n", smp_processor_id(), (unsigned long long)lba, jiffies)); if (aac_adapter_bounds(dev,scsicmd,lba)) @@ -1698,6 +1715,7 @@ static int aac_write(struct scsi_cmnd * scsicmd) int status; struct aac_dev *dev; struct fib * cmd_fibcontext; + int cid; dev = (struct aac_dev *)scsicmd->device->host->hostdata; /* @@ -1737,6 +1755,22 @@ static int aac_write(struct scsi_cmnd * scsicmd) count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; fua = scsicmd->cmnd[1] & 0x8; } + + if ((lba + count) > (dev->fsa_dev[scmd_id(scsicmd)].size)) { + cid = scmd_id(scsicmd); + dprintk((KERN_DEBUG "aacraid: Illegal lba\n")); + scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | + SAM_STAT_CHECK_CONDITION; + set_sense(&dev->fsa_dev[cid].sense_data, + HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE, + ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0); + memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, + min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); + scsicmd->scsi_done(scsicmd); + return 1; + } + dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n", smp_processor_id(), (unsigned long long)lba, jiffies)); if (aac_adapter_bounds(dev,scsicmd,lba)) -- cgit v1.2.2 From 9cccde93fed1ca988eb2fb17ab9194bf7b5ed1b0 Mon Sep 17 00:00:00 2001 From: "Rajashekhara, Mahesh" Date: Mon, 10 May 2010 04:29:25 -0700 Subject: [SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline Problem description: -------------------- The problem reported by one of the customer was when a logical array is deleted(from the SDK, from the GUI, from arcconf) then the corresponding physical device (/dev/sdb, for example) is not removed from the Linux namespace. So you end up with a "dead" device entry. And some of the linux tools go slightly wonky. Solution: --------- Based on the notification from FW, the driver calls "scsi_remove_device" for the DELETED drive. This call not only informs the scsi device status to the SCSI mid layer and also it will remove corresponding scsi device entries from the Linux sysfs. Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aacraid.h | 4 +++- drivers/scsi/aacraid/commsup.c | 8 ++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 9f985267c30f..4dbcc055ac78 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 26000 +# define AAC_DRIVER_BUILD 26400 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 @@ -26,6 +26,8 @@ #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff) #define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)256) +#define AAC_DEBUG_INSTRUMENT_AIF_DELETE + /* * These macros convert from physical channels to virtual channels */ diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 69692b050e3c..70079146e203 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -1133,6 +1133,9 @@ retry_next: if (device) { switch (device_config_needed) { case DELETE: +#if (defined(AAC_DEBUG_INSTRUMENT_AIF_DELETE)) + scsi_remove_device(device); +#else if (scsi_device_online(device)) { scsi_device_set_state(device, SDEV_OFFLINE); sdev_printk(KERN_INFO, device, @@ -1141,6 +1144,7 @@ retry_next: "array deleted" : "enclosure services event"); } +#endif break; case ADD: if (!scsi_device_online(device)) { @@ -1155,12 +1159,16 @@ retry_next: case CHANGE: if ((channel == CONTAINER_CHANNEL) && (!dev->fsa_dev[container].valid)) { +#if (defined(AAC_DEBUG_INSTRUMENT_AIF_DELETE)) + scsi_remove_device(device); +#else if (!scsi_device_online(device)) break; scsi_device_set_state(device, SDEV_OFFLINE); sdev_printk(KERN_INFO, device, "Device offlined - %s\n", "array failed"); +#endif break; } scsi_rescan_device(&device->sdev_gendev); -- cgit v1.2.2