From 79b9cd586f534f3f40ee66b6c27732149a5915ad Mon Sep 17 00:00:00 2001 From: Takashi YOSHII Date: Tue, 15 Aug 2006 07:26:32 -0500 Subject: [PATCH] [MTD] Maps: Add dependency on alternate probe methods to physmap map/physmap.c tries to probe "cfi_probe", "jedec_probe" and "map_rom", but map/Kconfig says it depends on MTD_CFI only. This patch adds MTD_JEDECPROBE and MTD_ROM to the dependency condition. Signed-off-by: Takashi YOSHII Signed-off-by: Josh Boyer --- drivers/mtd/maps/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 83d0b2a52527..64d1b6a6c920 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -13,13 +13,13 @@ config MTD_COMPLEX_MAPPINGS config MTD_PHYSMAP tristate "CFI Flash device in physical memory map" - depends on MTD_CFI + depends on MTD_CFI || MTD_JEDECPROBE || MTD_ROM help - This provides a 'mapping' driver which allows the CFI probe and - command set driver code to communicate with flash chips which - are mapped physically into the CPU's memory. You will need to - configure the physical address and size of the flash chips on - your particular board as well as the bus width, either statically + This provides a 'mapping' driver which allows the NOR Flash and + ROM driver code to communicate with chips which are mapped + physically into the CPU's memory. You will need to configure + the physical address and size of the flash chips on your + particular board as well as the bus width, either statically with config options or at run-time. config MTD_PHYSMAP_START -- cgit v1.2.2