From 7685359656774e0348835f72a68e201fe0285fa9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 18 Feb 2005 11:03:48 +0000 Subject: [MTD] Update BAST driver configuration update the BAST driver config (which already supports the vr1000) to be selected only if the vr1000 has been configured Signed-off-by: Ben Dooks Signed-off-by: Thomas Gleixner --- drivers/mtd/maps/Kconfig | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 7d21d432f380..d29dc121c1f7 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -1,5 +1,5 @@ # drivers/mtd/maps/Kconfig -# $Id: Kconfig,v 1.43 2005/01/24 00:35:21 bjd Exp $ +# $Id: Kconfig,v 1.44 2005/02/18 11:03:45 bjd Exp $ menu "Mapping drivers for chip access" depends on MTD!=n @@ -637,13 +637,14 @@ config MTD_DMV182 Map driver for Dy-4 SVME/DMV-182 board. config MTD_BAST - tristate "Map driver for Simtec BAST (EB2410ITX)" - depends on ARCH_BAST + tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000" + depends on ARCH_BAST || MACH_VR1000 select MTD_PARTITIONS select MTD_MAP_BANK_WIDTH_16 select MTD_JEDECPROBE help - Map driver for NOR flash on the Simtec BAST (EB2410ITX). + Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the + Thorcom VR1000 Note, this driver *cannot* over-ride the WP link on the board, or currently detect the state of the link. -- cgit v1.2.2