From 73f83182862a2c9113421720997c75ee939902f8 Mon Sep 17 00:00:00 2001 From: Alex Landau Date: Wed, 19 Sep 2007 23:14:18 +0800 Subject: Blackfin EMAC driver: add function to change the MAC address Alex Landau writes in the forums: Previously, changing the MAC address (e.g. via ifconfig) resulted in a generic function to be called that only changed a variable in memory. This patch also updated the Blackfin MAC address registers to filter the correct new MAC. Signed-off-by: Alex Landau Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Acked-by: Jeff Garzik Signed-off-by: Jeff Garzik --- drivers/net/bfin_mac.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index cebe55440e13..ead7be969975 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -463,7 +463,7 @@ void setup_system_regs(struct net_device *dev) bfin_write_DMA1_Y_MODIFY(0); } -void setup_mac_addr(u8 * mac_addr) +static void setup_mac_addr(u8 *mac_addr) { u32 addr_low = le32_to_cpu(*(__le32 *) & mac_addr[0]); u16 addr_hi = le16_to_cpu(*(__le16 *) & mac_addr[4]); @@ -473,6 +473,16 @@ void setup_mac_addr(u8 * mac_addr) bfin_write_EMAC_ADDRHI(addr_hi); } +static int bf537mac_set_mac_address(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + if (netif_running(dev)) + return -EBUSY; + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + setup_mac_addr(dev->dev_addr); + return 0; +} + static void adjust_tx_list(void) { int timeout_cnt = MAX_TIMEOUT_CNT; @@ -876,6 +886,7 @@ static int __init bf537mac_probe(struct net_device *dev) dev->open = bf537mac_open; dev->stop = bf537mac_close; dev->hard_start_xmit = bf537mac_hard_start_xmit; + dev->set_mac_address = bf537mac_set_mac_address; dev->tx_timeout = bf537mac_timeout; dev->set_multicast_list = bf537mac_set_multicast_list; #ifdef CONFIG_NET_POLL_CONTROLLER -- cgit v1.2.2