From 4a8dece21eea0ad6aca442272673d48693cd93b4 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 5 Nov 2012 13:51:51 +0200 Subject: drm/i915/crt: fix DPMS standby and suspend mode handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PCH platforms and VLV should map DPMS standby and suspend modes to off, but due to a buggy reversed comparison this is done on pre-PCH platforms instead. Reported-by: Loïc Yhuel Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56754 Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index b726b478a4f5..6345878ae1e7 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -143,7 +143,7 @@ static void intel_crt_dpms(struct drm_connector *connector, int mode) int old_dpms; /* PCH platforms and VLV only support on/off. */ - if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON) + if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON) mode = DRM_MODE_DPMS_OFF; if (mode == connector->dpms) -- cgit v1.2.2 From d0ddfbd3d1346c1f481ec2289eef350cdba64b42 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 12 Nov 2012 18:31:35 +0200 Subject: drm/i915/sdvo: clean up connectors on intel_sdvo_init() failures Any failures in intel_sdvo_init() after the intel_sdvo_setup_output() call left behind ghost connectors, attached (with a dangling pointer) to the sdvo that has been cleaned up and freed. Properly destroy any connectors attached to the encoder. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46381 CC: Chris Wilson Signed-off-by: Jani Nikula Cc: stable@vger.kernel.org Tested-by: bjo@nord-west.org [danvet: added a comment to explain why we need to clean up connectors even when sdvo_output_setup fails.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 79d308da29ff..c600fb06e25e 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2382,6 +2382,18 @@ intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags) return true; } +static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo) +{ + struct drm_device *dev = intel_sdvo->base.base.dev; + struct drm_connector *connector, *tmp; + + list_for_each_entry_safe(connector, tmp, + &dev->mode_config.connector_list, head) { + if (intel_attached_encoder(connector) == &intel_sdvo->base) + intel_sdvo_destroy(connector); + } +} + static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo, struct intel_sdvo_connector *intel_sdvo_connector, int type) @@ -2705,7 +2717,8 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) intel_sdvo->caps.output_flags) != true) { DRM_DEBUG_KMS("SDVO output failed to setup on %s\n", SDVO_NAME(intel_sdvo)); - goto err; + /* Output_setup can leave behind connectors! */ + goto err_output; } /* Only enable the hotplug irq if we need it, to work around noisy @@ -2718,12 +2731,12 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) /* Set the input timing to the screen. Assume always input 0. */ if (!intel_sdvo_set_target_input(intel_sdvo)) - goto err; + goto err_output; if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo, &intel_sdvo->pixel_clock_min, &intel_sdvo->pixel_clock_max)) - goto err; + goto err_output; DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, " "clock range %dMHz - %dMHz, " @@ -2743,6 +2756,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); return true; +err_output: + intel_sdvo_output_cleanup(intel_sdvo); + err: drm_encoder_cleanup(&intel_encoder->base); i2c_del_adapter(&intel_sdvo->ddc); -- cgit v1.2.2 From 2f4f649a69a9eb51f6e98130e19dd90a260a4145 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 12 Nov 2012 14:33:44 +0200 Subject: drm/i915: do not ignore eDP bpc settings from vbt There are laptops out there that need the eDP bpc from VBT. This is effectively a revert of commit 4344b813f105a19f793f1fd93ad775b784648b95 Author: Daniel Vetter Date: Fri Aug 10 11:10:20 2012 +0200 drm/i915: ignore eDP bpc settings from vbt but putting the VBT check after the EDID check to see them both in dmesg if this clamps more than the EDID. We have enough history with bpc clamping to warrant the extra debug info. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47641 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56401 Signed-off-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 461a637f1ef7..4154bcd7a070 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3841,6 +3841,17 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, } } + if (intel_encoder->type == INTEL_OUTPUT_EDP) { + /* Use VBT settings if we have an eDP panel */ + unsigned int edp_bpc = dev_priv->edp.bpp / 3; + + if (edp_bpc < display_bpc) { + DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + display_bpc = edp_bpc; + } + continue; + } + /* * HDMI is either 12 or 8, so if the display lets 10bpc sneak * through, clamp it down. (Note: >12bpc will be caught below.) -- cgit v1.2.2 From b9196395c905edec512dfd6690428084228c16ec Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 14 Nov 2012 09:10:39 -0500 Subject: drm/radeon: fix logic error in atombios_encoders.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=50431 Reported-by: David Binderman Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer --- drivers/gpu/drm/radeon/atombios_encoders.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index ba498f8e47a2..010bae19554a 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -1625,7 +1625,7 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); /* some early dce3.2 boards have a bug in their transmitter control table */ - if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730)) + if ((rdev->family != CHIP_RV710) && (rdev->family != CHIP_RV730)) atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); } if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) { -- cgit v1.2.2 From 888155bbf63a5f955d7a45932ff05e848f715bf0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 12 Nov 2012 11:07:24 +0000 Subject: vmwgfx: return an -EFAULT if copy_to_user() fails copy_to_user() returns the number of bytes remaining to be copied, but we want to return a negative error code here. I fixed a couple of these last year, but I missed this one. Signed-off-by: Dan Carpenter Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index b07ca2e4d04b..7290811f89be 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -110,6 +110,8 @@ int vmw_get_cap_3d_ioctl(struct drm_device *dev, void *data, memcpy_fromio(bounce, &fifo_mem[SVGA_FIFO_3D_CAPS], size); ret = copy_to_user(buffer, bounce, size); + if (ret) + ret = -EFAULT; vfree(bounce); if (unlikely(ret != 0)) -- cgit v1.2.2 From ac207ed2471150e06af0afc76e4becc701fa2733 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 13 Nov 2012 18:31:55 +0000 Subject: ttm: Clear the ttm page allocated from high memory zone correctly The TTM page can be allocated from high memory. In such case it is wrong to use the page_address(page) as the virtual address for the high memory page. bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50241 Signed-off-by: Zhao Yakui Cc: stable@vger.kernel.org Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_page_alloc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c index 860dc4813e99..bd2a3b40cd12 100644 --- a/drivers/gpu/drm/ttm/ttm_page_alloc.c +++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c @@ -749,7 +749,10 @@ static int ttm_get_pages(struct page **pages, unsigned npages, int flags, /* clear the pages coming from the pool if requested */ if (flags & TTM_PAGE_FLAG_ZERO_ALLOC) { list_for_each_entry(p, &plist, lru) { - clear_page(page_address(p)); + if (PageHighMem(p)) + clear_highpage(p); + else + clear_page(page_address(p)); } } -- cgit v1.2.2 From 55aa914e9274cf1d55397cc04eb926eb055c79f7 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 9 Nov 2012 12:10:43 +0000 Subject: drm/ttm: remove unneeded preempt_disable/enable It is unnecessary to disable preemption explicitly while calling copy_highpage(). Because copy_highpage() will do it again through kmap_atomic/kunmap_atomic. Signed-off-by: Akinobu Mita Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_tt.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index bf8260133ea9..7d759a430294 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -308,9 +308,7 @@ int ttm_tt_swapin(struct ttm_tt *ttm) if (unlikely(to_page == NULL)) goto out_err; - preempt_disable(); copy_highpage(to_page, from_page); - preempt_enable(); page_cache_release(from_page); } @@ -358,9 +356,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage) ret = PTR_ERR(to_page); goto out_err; } - preempt_disable(); copy_highpage(to_page, from_page); - preempt_enable(); set_page_dirty(to_page); mark_page_accessed(to_page); page_cache_release(to_page); -- cgit v1.2.2