From 6e16edfe62eb49274c8a74dc04d1c6f315f8f82b Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Mon, 8 Nov 2010 00:20:30 -0600 Subject: usb: musb: fail unaligned DMA transfers on v1.8 and above The Inventra DMA engine in version 1.8 and later of the MUSB controller cannot handle DMA addresses that are not aligned to a 4 byte boundary. It ends up ignoring the last two bits programmed in the DMA_ADDR register. This is a deliberate design change in the controller and is documented in the programming guide. Earlier versions of the controller could handle these accesses just fine. Fail dma_channel_program if we see an unaligned address when using the newer controllers, so that the caller can carry out the transfer using PIO mode. (Current callers already have this backup path in place). Signed-off-by: Anand Gadiyar Tested-by: Ming Lei Cc: Ajay Kumar Gupta Cc: Mike Frysinger Signed-off-by: Felipe Balbi --- drivers/usb/musb/musbhsdma.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 6f771af5cbdb..563114d613d6 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -158,6 +158,8 @@ static int dma_channel_program(struct dma_channel *channel, dma_addr_t dma_addr, u32 len) { struct musb_dma_channel *musb_channel = channel->private_data; + struct musb_dma_controller *controller = musb_channel->controller; + struct musb *musb = controller->private_data; DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n", musb_channel->epnum, @@ -167,6 +169,18 @@ static int dma_channel_program(struct dma_channel *channel, BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || channel->status == MUSB_DMA_STATUS_BUSY); + /* + * The DMA engine in RTL1.8 and above cannot handle + * DMA addresses that are not aligned to a 4 byte boundary. + * It ends up masking the last two bits of the address + * programmed in DMA_ADDR. + * + * Fail such DMA transfers, so that the backup PIO mode + * can carry out the transfer + */ + if ((musb->hwvers >= MUSB_HWVERS_1800) && (dma_addr % 4)) + return false; + channel->actual_len = 0; musb_channel->start_addr = dma_addr; musb_channel->len = len; -- cgit v1.2.2