From 58741e8b3603e56c3699550e8bc89cb136329343 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 2 May 2006 20:02:39 +0100 Subject: [MMC] PXA and i.MX: don't avoid sending stop command on error Always send a stop command at the end of a data transfer. If we avoid sending the stop command, some cards remain in data transfer mode, and refuse to accept further read/write commands. Signed-off-by: Russell King --- drivers/mmc/imxmmc.c | 2 +- drivers/mmc/pxamci.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c index 07f36c454bd6..bc271925099a 100644 --- a/drivers/mmc/imxmmc.c +++ b/drivers/mmc/imxmmc.c @@ -529,7 +529,7 @@ static int imxmci_data_done(struct imxmci_host *host, unsigned int stat) data_error = imxmci_finish_data(host, stat); - if (host->req->stop && (data_error == MMC_ERR_NONE)) { + if (host->req->stop) { imxmci_stop_clock(host); imxmci_start_cmd(host, host->req->stop, 0); } else { diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index eb42cb349420..15a5caa0bdeb 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -291,7 +291,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat) pxamci_disable_irq(host, DATA_TRAN_DONE); host->data = NULL; - if (host->mrq->stop && data->error == MMC_ERR_NONE) { + if (host->mrq->stop) { pxamci_stop_clock(host); pxamci_start_cmd(host, host->mrq->stop, 0); } else { -- cgit v1.2.2