From 57e386ce9d136261bc60a5223f39b179a3c11046 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 1 May 2007 00:27:58 +0900 Subject: ne: MIPS: Use platform_driver for ne on RBTX49XX This patch lets RBTX49XX boards use generic platform_driver interface for the ne driver. * Use platform_device to pass ioaddr and irq to the ne driver. * Remove unnecessary ifdefs for RBTX49XX from the ne driver. * Make the ne driver selectable on these boards regardless of CONFIG_ISA Signed-off-by: Atsushi Nemoto Signed-off-by: Jeff Garzik --- .../tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c | 19 +++++++++++++++++++ arch/mips/tx4938/toshiba_rbtx4938/setup.c | 20 ++++++++++++++++++++ drivers/net/Kconfig | 2 +- drivers/net/ne.c | 8 -------- 4 files changed, 40 insertions(+), 9 deletions(-) diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c index 0f7576dfd141..a0c11efeaeeb 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c @@ -1049,3 +1049,22 @@ static int __init toshiba_rbtx4927_rtc_init(void) return IS_ERR(dev) ? PTR_ERR(dev) : 0; } device_initcall(toshiba_rbtx4927_rtc_init); + +static int __init rbtx4927_ne_init(void) +{ + static struct resource __initdata res[] = { + { + .start = RBTX4927_RTL_8019_BASE, + .end = RBTX4927_RTL_8019_BASE + 0x20 - 1, + .flags = IORESOURCE_IO, + }, { + .start = RBTX4927_RTL_8019_IRQ, + .flags = IORESOURCE_IRQ, + } + }; + struct platform_device *dev = + platform_device_register_simple("ne", -1, + res, ARRAY_SIZE(res)); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} +device_initcall(rbtx4927_ne_init); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c index 66163ba452c8..f5d1ce739fcc 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -1037,3 +1038,22 @@ static int __init tx4938_spi_proc_setup(void) __initcall(tx4938_spi_proc_setup); #endif + +static int __init rbtx4938_ne_init(void) +{ + struct resource res[] = { + { + .start = RBTX4938_RTL_8019_BASE, + .end = RBTX4938_RTL_8019_BASE + 0x20 - 1, + .flags = IORESOURCE_IO, + }, { + .start = RBTX4938_RTL_8019_IRQ, + .flags = IORESOURCE_IRQ, + } + }; + struct platform_device *dev = + platform_device_register_simple("ne", -1, + res, ARRAY_SIZE(res)); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} +device_initcall(rbtx4938_ne_init); diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 279ec625cec4..372f25716b5b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1104,7 +1104,7 @@ config ETH16I config NE2000 tristate "NE2000/NE1000 support" - depends on NET_ISA || (Q40 && m) || M32R + depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938 select CRC32 ---help--- If you have a network (Ethernet) card of this type, say Y and read diff --git a/drivers/net/ne.c b/drivers/net/ne.c index 22d6fe45375e..c9f74bf5f491 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -56,10 +56,6 @@ static const char version2[] = #include #include -#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) -#include -#endif - #include "8390.h" #define DRV_NAME "ne" @@ -232,10 +228,6 @@ struct net_device * __init ne_probe(int unit) sprintf(dev->name, "eth%d", unit); netdev_boot_setup_check(dev); -#ifdef CONFIG_TOSHIBA_RBTX4938 - dev->base_addr = RBTX4938_RTL_8019_BASE; - dev->irq = RBTX4938_RTL_8019_IRQ; -#endif err = do_ne_probe(dev); if (err) goto out; -- cgit v1.2.2