From 5742b0c95026c817d9c266174ca39a909e8d38ca Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 2 May 2005 11:25:17 -0400 Subject: [PATCH] USB dummy_hcd: Partial OTG emulation Partial OTG support for dummy_hcd, mostly as a framework for further work. It emulates the new OTG flags in the host and peripheral frameworks, if that option is configured. But it's incomplete: - Resetting the peripheral needs to clear the OTG state bits; a second enumeration won't work correctly. - This stops modeling HNP right when roles should switch the first time. It should probably disconnect, then set the usb_bus.is_b_host and usb_gadget.is_a_peripheral flags; then it'd enumerate almost normally, except for the role reversal. Roles could then switch a second time, back to "normal" (with those flags cleared). - SRP should be modeled as "resume from port-unpowered", which is a state that usbcore doesn't yet use. HNP can be triggered by enabling the OTG whitelist and configuring a gadget driver that's not in that list; or by configuring Gadget Zero to identify itself as the HNP test device. Sent-by: David Brownell Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 1918d10f7569..e9b95df5b23d 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -601,8 +601,10 @@ static int dummy_wakeup (struct usb_gadget *_gadget) struct dummy *dum; dum = gadget_to_dummy (_gadget); - if ((dum->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) == 0 - || !(dum->port_status & (1 << USB_PORT_FEAT_SUSPEND))) + if (!(dum->port_status & (1 << USB_PORT_FEAT_SUSPEND)) + || !(dum->devstatus & + ( (1 << USB_DEVICE_B_HNP_ENABLE) + | (1 << USB_DEVICE_REMOTE_WAKEUP)))) return -EINVAL; /* hub notices our request, issues downstream resume, etc */ @@ -713,6 +715,9 @@ usb_gadget_register_driver (struct usb_gadget_driver *driver) dum->gadget.ops = &dummy_ops; dum->gadget.is_dualspeed = 1; + /* maybe claim OTG support, though we won't complete HNP */ + dum->gadget.is_otg = (dummy_to_hcd(dum)->self.otg_port != 0); + dum->devstatus = 0; dum->resuming = 0; @@ -1215,6 +1220,16 @@ restart: switch (setup.wValue) { case USB_DEVICE_REMOTE_WAKEUP: break; + case USB_DEVICE_B_HNP_ENABLE: + dum->gadget.b_hnp_enable = 1; + break; + case USB_DEVICE_A_HNP_SUPPORT: + dum->gadget.a_hnp_support = 1; + break; + case USB_DEVICE_A_ALT_HNP_SUPPORT: + dum->gadget.a_alt_hnp_support + = 1; + break; default: value = -EOPNOTSUPP; } @@ -1533,6 +1548,13 @@ static int dummy_hub_control ( spin_unlock (&dum->lock); dum->driver->suspend (&dum->gadget); spin_lock (&dum->lock); + /* HNP would happen here; for now we + * assume b_bus_req is always true. + */ + if (((1 << USB_DEVICE_B_HNP_ENABLE) + & dum->devstatus) != 0) + dev_dbg (dummy_dev(dum), + "no HNP yet!\n"); } } break; @@ -1648,6 +1670,10 @@ static int dummy_start (struct usb_hcd *hcd) hcd->power_budget = 8; hcd->state = HC_STATE_RUNNING; +#ifdef CONFIG_USB_OTG + hcd->self.otg_port = 1; +#endif + /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ device_create_file (dummy_dev(dum), &dev_attr_urbs); return 0; -- cgit v1.2.2