From afe48049ab1d0ca83afe45f9d5116bf4507741eb Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Jun 2011 08:21:10 +0000 Subject: ARM: mach-shmobile: sh7372: Add USB-DMAC support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh7372.c | 5 +- arch/arm/mach-shmobile/include/mach/sh7372.h | 4 + arch/arm/mach-shmobile/setup-sh7372.c | 146 +++++++++++++++++++++++++++ 3 files changed, 154 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index c0800d83971e..c239ab10c95b 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -509,7 +509,7 @@ enum { MSTP001, MSTP118, MSTP117, MSTP116, MSTP113, MSTP106, MSTP101, MSTP100, MSTP223, - MSTP218, MSTP217, MSTP216, + MSTP214, MSTP218, MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403, @@ -538,6 +538,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */ [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */ [MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */ + [MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ @@ -633,6 +634,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */ CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */ CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */ + CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */ + CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP214]), /* USB-DMAC1 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index df20d7670172..51db9d3a2cac 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -458,6 +458,10 @@ enum { SHDMA_SLAVE_SDHI2_TX, SHDMA_SLAVE_MMCIF_RX, SHDMA_SLAVE_MMCIF_TX, + SHDMA_SLAVE_USB0_TX, + SHDMA_SLAVE_USB0_RX, + SHDMA_SLAVE_USB1_TX, + SHDMA_SLAVE_USB1_RX, }; extern struct clk sh7372_extal1_clk; diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index cd807eea69e2..f2a58d48bfb4 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -602,6 +602,150 @@ static struct platform_device dma2_device = { }, }; +/* + * USB-DMAC + */ + +unsigned int usbts_shift[] = {3, 4, 5}; + +enum { + XMIT_SZ_8BYTE = 0, + XMIT_SZ_16BYTE = 1, + XMIT_SZ_32BYTE = 2, +}; + +#define USBTS_INDEX2VAL(i) (((i) & 3) << 6) + +static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { + { + .offset = 0, + }, { + .offset = 0x20, + }, +}; + +/* USB DMAC0 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB0_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB0_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma0_platform_data = { + .slave = sh7372_usb_dmae0_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae0_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68a0020, + .end = 0xe68a0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68a0000, + .end = 0xe68a0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x0a00), + .end = evt2irq(0x0a00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma0_device = { + .name = "sh-dma-engine", + .id = 3, + .resource = sh7372_usb_dmae0_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae0_resources), + .dev = { + .platform_data = &usb_dma0_platform_data, + }, +}; + +/* USB DMAC1 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB1_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB1_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma1_platform_data = { + .slave = sh7372_usb_dmae1_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae1_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68c0020, + .end = 0xe68c0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68c0000, + .end = 0xe68c0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x1d00), + .end = evt2irq(0x1d00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma1_device = { + .name = "sh-dma-engine", + .id = 4, + .resource = sh7372_usb_dmae1_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae1_resources), + .dev = { + .platform_data = &usb_dma1_platform_data, + }, +}; + /* VPU */ static struct uio_info vpu_platform_data = { .name = "VPU5HG", @@ -829,6 +973,8 @@ static struct platform_device *sh7372_late_devices[] __initdata = { &dma0_device, &dma1_device, &dma2_device, + &usb_dma0_device, + &usb_dma1_device, &vpu_device, &veu0_device, &veu1_device, -- cgit v1.2.2 From 0ed61fc9da59ea45d56a6928653691cef14bab9b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 30 Jun 2011 09:22:50 +0000 Subject: ARM: mach-shmobile: Use CMT2 for timer on sh7372 Switch the sh7372 CPU support to use CMT2 instead of CMT1 for system timer. CMT1 is located in the A3SP power domain while CMT2 is located in the always-on power domain C5. This improves our PM situation - with CMT2 as timer we can power down A3SP and still access the timer. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh7372.c | 8 ++++---- arch/arm/mach-shmobile/setup-sh7372.c | 30 +++++++++++++++--------------- 2 files changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index c0800d83971e..7fb1d2e52540 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -511,8 +511,8 @@ enum { MSTP001, MSTP223, MSTP218, MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, - MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403, + MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, + MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403, MSTP400, MSTP_NR }; #define MSTP(_parent, _reg, _bit, _flags) \ @@ -545,7 +545,6 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ - [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ @@ -559,6 +558,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */ [MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ + [MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */ }; #define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } @@ -640,7 +640,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ @@ -658,6 +657,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ + CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */ CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index cd807eea69e2..cb8ac7845245 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -169,35 +169,35 @@ static struct platform_device scif6_device = { }; /* CMT */ -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, +static struct sh_timer_config cmt2_platform_data = { + .name = "CMT2", + .channel_offset = 0x40, + .timer_bit = 5, .clockevent_rating = 125, .clocksource_rating = 125, }; -static struct resource cmt10_resources[] = { +static struct resource cmt2_resources[] = { [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, + .name = "CMT2", + .start = 0xe6130040, + .end = 0xe613004b, .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0b00), /* CMT1_CMT10 */ + .start = evt2irq(0x0b80), /* CMT2 */ .flags = IORESOURCE_IRQ, }, }; -static struct platform_device cmt10_device = { +static struct platform_device cmt2_device = { .name = "sh_cmt", - .id = 10, + .id = 2, .dev = { - .platform_data = &cmt10_platform_data, + .platform_data = &cmt2_platform_data, }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), + .resource = cmt2_resources, + .num_resources = ARRAY_SIZE(cmt2_resources), }; /* TMU */ @@ -818,7 +818,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif4_device, &scif5_device, &scif6_device, - &cmt10_device, + &cmt2_device, &tmu00_device, &tmu01_device, }; -- cgit v1.2.2 From b8e513a2ecafb5bb068c00be98d584871afcd4c3 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 9 Jul 2011 21:11:14 +0000 Subject: ARM: static should be at beginning of declaration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make sure that the 'static' keywork is at the beginning of declaration for arch/arm/mach-shmobile/board-ap4evb.c This gets rid of warnings like warning: ‘static’ is not at beginning of declaration when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by: Jesper Juhl Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 803bc6edfca4..bb4e084920b8 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -443,7 +443,7 @@ static struct platform_device usb1_host_device = { .resource = usb1_host_resources, }; -const static struct fb_videomode ap4evb_lcdc_modes[] = { +static const struct fb_videomode ap4evb_lcdc_modes[] = { { #ifdef CONFIG_AP4EVB_QHD .name = "R63302(QHD)", -- cgit v1.2.2 From 3f7e5e2423f6233f7665d54061ba7761ca90cf52 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 13 Jul 2011 07:59:48 +0000 Subject: clocksource: sh_cmt: wait for CMCNT on init V2 Add code to the CMT driver to wait for CMCNT V2. This to let the register value settle before starting the timer channel. Makes the driver more robust. Needed for CMT2 on sh7372 and certain CMT channels on sh73a0. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index dc7c033ef587..32a77becc098 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -150,13 +151,13 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) { - int ret; + int k, ret; /* enable clock */ ret = clk_enable(p->clk); if (ret) { dev_err(&p->pdev->dev, "cannot enable clock\n"); - return ret; + goto err0; } /* make sure channel is disabled */ @@ -174,9 +175,38 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) sh_cmt_write(p, CMCOR, 0xffffffff); sh_cmt_write(p, CMCNT, 0); + /* + * According to the sh73a0 user's manual, as CMCNT can be operated + * only by the RCLK (Pseudo 32 KHz), there's one restriction on + * modifying CMCNT register; two RCLK cycles are necessary before + * this register is either read or any modification of the value + * it holds is reflected in the LSI's actual operation. + * + * While at it, we're supposed to clear out the CMCNT as of this + * moment, so make sure it's processed properly here. This will + * take RCLKx2 at maximum. + */ + for (k = 0; k < 100; k++) { + if (!sh_cmt_read(p, CMCNT)) + break; + udelay(1); + } + + if (sh_cmt_read(p, CMCNT)) { + dev_err(&p->pdev->dev, "cannot clear CMCNT\n"); + ret = -ETIMEDOUT; + goto err1; + } + /* enable channel */ sh_cmt_start_stop_ch(p, 1); return 0; + err1: + /* stop clock */ + clk_disable(p->clk); + + err0: + return ret; } static void sh_cmt_disable(struct sh_cmt_priv *p) -- cgit v1.2.2 From b4300b72cfc01ea75b8aaede574bdfb04545d691 Mon Sep 17 00:00:00 2001 From: David Engraf Date: Wed, 20 Jul 2011 13:03:39 +0000 Subject: shwdt: fix usage of mod_timer This patch fixes the usage of mod_timer and makes the driver usable. mod_timer must be called with an absolute timeout in jiffies, the old implementation used a relative timeout thus the hardware watchdog was never triggered. Signed-off-by: David Engraf Signed-off-by: Paul Mundt --- drivers/watchdog/shwdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c index db84f2322d1a..a267dc078daf 100644 --- a/drivers/watchdog/shwdt.c +++ b/drivers/watchdog/shwdt.c @@ -64,7 +64,7 @@ * misses its deadline, the kernel timer will allow the WDT to overflow. */ static int clock_division_ratio = WTCSR_CKS_4096; -#define next_ping_period(cks) msecs_to_jiffies(cks - 4) +#define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4)) static const struct watchdog_info sh_wdt_info; static struct platform_device *sh_wdt_dev; -- cgit v1.2.2 From 9a14a92c939aea1aaf27f5ad37b26b235acc2a65 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 15 Jul 2011 10:58:55 +0000 Subject: sh: intc: enable both edges GPIO interrupts on sh7372 IRQ-capable GPIOs on sh7372 can be configured to produce interrupts on both edges. Signed-off-by: Guennadi Liakhovetski Acked-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/sh/intc/chip.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c index f33e2dd97934..33b2ed451e09 100644 --- a/drivers/sh/intc/chip.c +++ b/drivers/sh/intc/chip.c @@ -186,6 +186,9 @@ static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = { !defined(CONFIG_CPU_SUBTYPE_SH7709) [IRQ_TYPE_LEVEL_HIGH] = VALID(3), #endif +#if defined(CONFIG_ARCH_SH7372) + [IRQ_TYPE_EDGE_BOTH] = VALID(4), +#endif }; static int intc_set_type(struct irq_data *data, unsigned int type) -- cgit v1.2.2 From c5ad48f3117c4aae379b536f3270fc1efae945c0 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 20 Jun 2011 23:00:12 +0000 Subject: ARM: mach-shmobile: ag5evm: SDHI requires waiting for idle The SDHI block on the ag5evm requires waiting for idle before writing to some registers. Cc: Guennadi Liakhovetski Cc: Magnus Damm Signed-off-by: Simon Horman Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index ce5c2513c6ce..cdfdd624d21d 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -341,6 +341,7 @@ static struct platform_device mipidsi0_device = { static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, }; @@ -382,7 +383,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) } static struct sh_mobile_sdhi_info sh_sdhi1_info = { - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .set_pwr = ag5evm_sdhi1_set_pwr, -- cgit v1.2.2 From 00fe1ae91e0d69e52e8212d23cd3ecc74a7259a0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 29 Jul 2011 16:24:46 +0200 Subject: netfilter: xt_rateest: fix xt_rateest_mt_checkentry() commit 4a5a5c73b7cfee (slightly better error reporting) added some useless code in xt_rateest_mt_checkentry(). Fix this so that different error codes can really be returned. Signed-off-by: Eric Dumazet CC: Jan Engelhardt Signed-off-by: Patrick McHardy --- net/netfilter/xt_rateest.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/netfilter/xt_rateest.c b/net/netfilter/xt_rateest.c index 76a083184d8e..ed0db15ab00e 100644 --- a/net/netfilter/xt_rateest.c +++ b/net/netfilter/xt_rateest.c @@ -78,7 +78,7 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par) { struct xt_rateest_match_info *info = par->matchinfo; struct xt_rateest *est1, *est2; - int ret = false; + int ret = -EINVAL; if (hweight32(info->flags & (XT_RATEEST_MATCH_ABS | XT_RATEEST_MATCH_REL)) != 1) @@ -101,13 +101,12 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par) if (!est1) goto err1; + est2 = NULL; if (info->flags & XT_RATEEST_MATCH_REL) { est2 = xt_rateest_lookup(info->name2); if (!est2) goto err2; - } else - est2 = NULL; - + } info->est1 = est1; info->est2 = est2; @@ -116,7 +115,7 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par) err2: xt_rateest_put(est1); err1: - return -EINVAL; + return ret; } static void xt_rateest_mt_destroy(const struct xt_mtdtor_param *par) -- cgit v1.2.2 From 91c66c6893a3e2bb8a88a30cb76007d5d49d32c9 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Fri, 29 Jul 2011 16:38:49 +0200 Subject: netfilter: ip_queue: Fix small leak in ipq_build_packet_message() ipq_build_packet_message() in net/ipv4/netfilter/ip_queue.c and net/ipv6/netfilter/ip6_queue.c contain a small potential mem leak as far as I can tell. We allocate memory for 'skb' with alloc_skb() annd then call nlh = NLMSG_PUT(skb, 0, 0, IPQM_PACKET, size - sizeof(*nlh)); NLMSG_PUT is a macro NLMSG_PUT(skb, pid, seq, type, len) \ NLMSG_NEW(skb, pid, seq, type, len, 0) that expands to NLMSG_NEW, which is also a macro which expands to: NLMSG_NEW(skb, pid, seq, type, len, flags) \ ({ if (unlikely(skb_tailroom(skb) < (int)NLMSG_SPACE(len))) \ goto nlmsg_failure; \ __nlmsg_put(skb, pid, seq, type, len, flags); }) If we take the true branch of the 'if' statement and 'goto nlmsg_failure', then we'll, at that point, return from ipq_build_packet_message() without having assigned 'skb' to anything and we'll leak the memory we allocated for it when it goes out of scope. Fix this by placing a 'kfree(skb)' at 'nlmsg_failure'. I admit that I do not know how likely this to actually happen or even if there's something that guarantees that it will never happen - I'm not that familiar with this code, but if that is so, I've not been able to spot it. Signed-off-by: Jesper Juhl Signed-off-by: Patrick McHardy --- net/ipv4/netfilter/ip_queue.c | 1 + net/ipv6/netfilter/ip6_queue.c | 1 + 2 files changed, 2 insertions(+) diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c index 5c9b9d963918..48f7d5b4ff37 100644 --- a/net/ipv4/netfilter/ip_queue.c +++ b/net/ipv4/netfilter/ip_queue.c @@ -218,6 +218,7 @@ ipq_build_packet_message(struct nf_queue_entry *entry, int *errp) return skb; nlmsg_failure: + kfree_skb(skb); *errp = -EINVAL; printk(KERN_ERR "ip_queue: error creating packet message\n"); return NULL; diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c index 249394863284..87b243a25afa 100644 --- a/net/ipv6/netfilter/ip6_queue.c +++ b/net/ipv6/netfilter/ip6_queue.c @@ -218,6 +218,7 @@ ipq_build_packet_message(struct nf_queue_entry *entry, int *errp) return skb; nlmsg_failure: + kfree_skb(skb); *errp = -EINVAL; printk(KERN_ERR "ip6_queue: error creating packet message\n"); return NULL; -- cgit v1.2.2 From 9823d9ff483af4ce8804a9eb69600ca739cd1f58 Mon Sep 17 00:00:00 2001 From: Bart De Schuymer Date: Fri, 29 Jul 2011 16:40:30 +0200 Subject: netfilter: ebtables: fix ebtables build dependency MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The configuration of ebtables shouldn't depend on CONFIG_BRIDGE_NETFILTER, only on CONFIG_NETFILTER. Reported-by: Sébastien Laveze Signed-off-by: Bart De Schuymer Signed-off-by: Patrick McHardy --- net/bridge/netfilter/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/netfilter/Kconfig b/net/bridge/netfilter/Kconfig index ba6f73eb06c6..a9aff9c7d027 100644 --- a/net/bridge/netfilter/Kconfig +++ b/net/bridge/netfilter/Kconfig @@ -4,7 +4,7 @@ menuconfig BRIDGE_NF_EBTABLES tristate "Ethernet Bridge tables (ebtables) support" - depends on BRIDGE && BRIDGE_NETFILTER + depends on BRIDGE && NETFILTER select NETFILTER_XTABLES help ebtables is a general, extensible frame/packet identification -- cgit v1.2.2 From ad75b88ac3792ae6a541d9b9fa84e379bd0b29dd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 3 Aug 2011 12:33:20 +0900 Subject: serial: sh-sci: Fix up default regtype probing. Presently the default regtype probing inadvertently bails out due to an inverted error check. This fixes it up, and gets platforms without explicit regtype specifications working again. Reported-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/tty/serial/sh-sci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index d0a56235c50e..522f69d3c8ae 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1889,7 +1889,7 @@ static int __devinit sci_init_single(struct platform_device *dev, if (p->regtype == SCIx_PROBE_REGTYPE) { ret = sci_probe_regmap(p); - if (unlikely(!ret)) + if (unlikely(ret != 0)) return ret; } -- cgit v1.2.2 From 5beabc7fcd99856084e232b37d3280ce353eaf41 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 2 Aug 2011 09:42:54 +0000 Subject: serial: sh-sci: fix DMA build by including dma-mapping.h Include dma-mapping.h to fix build of the sh-sci driver on SH-Mobile ARM (sh73a0) when CONFIG_SERIAL_SH_SCI_DMA=y: drivers/tty/serial/sh-sci.c: In function 'sci_rx_dma_release': drivers/tty/serial/sh-sci.c:1182:3: error: implicit declaration of function 'dma_free_coherent' drivers/tty/serial/sh-sci.c: In function 'work_fn_tx': drivers/tty/serial/sh-sci.c:1333:2: error: implicit declaration of function 'dma_sync_sg_for_device' drivers/tty/serial/sh-sci.c: In function 'sci_request_dma': drivers/tty/serial/sh-sci.c:1498:3: error: implicit declaration of function 'dma_map_sg' drivers/tty/serial/sh-sci.c:1527:3: error: implicit declaration of function 'dma_alloc_coherent' drivers/tty/serial/sh-sci.c:1527:10: warning: assignment makes pointer from integer without a cast make[3]: *** [drivers/tty/serial/sh-sci.o] Error 1 make[2]: *** [drivers/tty/serial] Error 2 make[1]: *** [drivers/tty] Error 2 make: *** [drivers] Error 2 Signed-off-by: Magnus Damm Tested-by: Simon Horman Signed-off-by: Paul Mundt --- drivers/tty/serial/sh-sci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 522f69d3c8ae..38a81ae9b7df 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include -- cgit v1.2.2 From c84b51e65ea2f256353c339bd87e991b7e64630f Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 31 Jul 2011 21:36:35 +0000 Subject: sh: Fix conflicting definitions of ptrace_triggered The extra nmi argument is causing this compile fail: CC arch/sh/kernel/ptrace_32.o arch/sh/kernel/ptrace_32.c:66:6: error: conflicting types for 'ptrace_triggered' arch/sh/include/asm/ptrace.h:126:13: note: previous declaration of 'ptrace_triggered' was here make[3]: *** [arch/sh/kernel/ptrace_32.o] Error 1 Signed-off-by: Paul Gortmaker Signed-off-by: Paul Mundt --- arch/sh/include/asm/ptrace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index b97baf81a87b..2d3679b2447f 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -123,7 +123,7 @@ static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, struct perf_event; struct perf_sample_data; -extern void ptrace_triggered(struct perf_event *bp, int nmi, +extern void ptrace_triggered(struct perf_event *bp, struct perf_sample_data *data, struct pt_regs *regs); #define task_pt_regs(task) \ -- cgit v1.2.2 From 1ba762209491e2496e58baffa3fd65d661f54404 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 3 Aug 2011 03:47:36 +0000 Subject: serial: sh-sci: console Runtime PM support Add Runtime PM context save/restore support to the SCIF driver. Tested on the AP4EVB console. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/tty/serial/sh-sci.c | 68 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 58 insertions(+), 10 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 38a81ae9b7df..ffcaceee0215 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -96,6 +96,12 @@ struct sci_port { #endif struct notifier_block freq_transition; + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE + unsigned short saved_smr; + unsigned short saved_fcr; + unsigned char saved_brr; +#endif }; /* Function prototypes */ @@ -1634,11 +1640,25 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, return ((freq + 16 * bps) / (32 * bps) - 1); } +static void sci_reset(struct uart_port *port) +{ + unsigned int status; + + do { + status = sci_in(port, SCxSR); + } while (!(status & SCxSR_TEND(port))); + + sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ + + if (port->type != PORT_SCI) + sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); +} + static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { struct sci_port *s = to_sci_port(port); - unsigned int status, baud, smr_val, max_baud; + unsigned int baud, smr_val, max_baud; int t = -1; u16 scfcr = 0; @@ -1658,14 +1678,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_port_enable(s); - do { - status = sci_in(port, SCxSR); - } while (!(status & SCxSR_TEND(port))); - - sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ - - if (port->type != PORT_SCI) - sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST); + sci_reset(port); smr_val = sci_in(port, SCSMR) & 3; @@ -2037,7 +2050,8 @@ static int __devinit serial_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - /* TODO: disable clock */ + sci_port_disable(sci_port); + return uart_set_options(port, co, baud, parity, bits, flow); } @@ -2080,6 +2094,36 @@ static int __devinit sci_probe_earlyprintk(struct platform_device *pdev) return 0; } +#define uart_console(port) ((port)->cons->index == (port)->line) + +static int sci_runtime_suspend(struct device *dev) +{ + struct sci_port *sci_port = dev_get_drvdata(dev); + struct uart_port *port = &sci_port->port; + + if (uart_console(port)) { + sci_port->saved_smr = sci_in(port, SCSMR); + sci_port->saved_brr = sci_in(port, SCBRR); + sci_port->saved_fcr = sci_in(port, SCFCR); + } + return 0; +} + +static int sci_runtime_resume(struct device *dev) +{ + struct sci_port *sci_port = dev_get_drvdata(dev); + struct uart_port *port = &sci_port->port; + + if (uart_console(port)) { + sci_reset(port); + sci_out(port, SCSMR, sci_port->saved_smr); + sci_out(port, SCBRR, sci_port->saved_brr); + sci_out(port, SCFCR, sci_port->saved_fcr); + sci_out(port, SCSCR, sci_port->cfg->scscr); + } + return 0; +} + #define SCI_CONSOLE (&serial_console) #else @@ -2089,6 +2133,8 @@ static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev) } #define SCI_CONSOLE NULL +#define sci_runtime_suspend NULL +#define sci_runtime_resume NULL #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ @@ -2204,6 +2250,8 @@ static int sci_resume(struct device *dev) } static const struct dev_pm_ops sci_dev_pm_ops = { + .runtime_suspend = sci_runtime_suspend, + .runtime_resume = sci_runtime_resume, .suspend = sci_suspend, .resume = sci_resume, }; -- cgit v1.2.2 From c66d3fcbf306af3c0c4b6f4e0d81467f89c67702 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 8 Aug 2011 16:30:11 +0900 Subject: sh: Fix up fallout from cpuidle changes. Fixes up the pm_idle redefinition that was introduced with the earlier cpuidle changes. Signed-off-by: Paul Mundt --- arch/sh/kernel/idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c index 32114e0941ae..db4ecd731a00 100644 --- a/arch/sh/kernel/idle.c +++ b/arch/sh/kernel/idle.c @@ -22,7 +22,7 @@ #include #include -static void (*pm_idle)(void); +void (*pm_idle)(void); static int hlt_counter; -- cgit v1.2.2 From b3623080ff6974e696710b6c6eb4cdbf2bbab347 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 3 Aug 2011 06:08:54 +0000 Subject: mmc: sdhi, mmcif: zboot: Correct clock disable logic This corrects a logic-error that I made in the original implementation. An alternate patch would be to just remove these lines and leave the clock running as it is reconfigured later on during boot anyway. Signed-off-by: Simon Horman Signed-off-by: Paul Mundt --- arch/arm/boot/compressed/mmcif-sh7372.c | 2 +- arch/arm/boot/compressed/sdhi-sh7372.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c index b6f61d9a5a1b..672ae95db5c3 100644 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ b/arch/arm/boot/compressed/mmcif-sh7372.c @@ -82,7 +82,7 @@ asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) /* Disable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); } diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c index d403a8b24d7f..d279294f2381 100644 --- a/arch/arm/boot/compressed/sdhi-sh7372.c +++ b/arch/arm/boot/compressed/sdhi-sh7372.c @@ -85,7 +85,7 @@ asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) goto err; /* Disable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); -- cgit v1.2.2 From fe43756143c4efa6f8fdef07aa3ca4dc0be24ada Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Jun 2011 08:21:21 +0000 Subject: ARM: mach-shmobile: mackerel: Add USB-DMA ID This patch use channel0 as Tx, and channel1 as Rx Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index d41c01f83f15..e1d9b6af3f94 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -641,6 +641,8 @@ static struct usbhs_private usbhs0_private = { }, .driver_param = { .buswait_bwait = 4, + .d0_tx_id = SHDMA_SLAVE_USB0_TX, + .d1_rx_id = SHDMA_SLAVE_USB0_RX, }, }, }; @@ -810,6 +812,8 @@ static struct usbhs_private usbhs1_private = { .buswait_bwait = 4, .pipe_type = usbhs1_pipe_cfg, .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), + .d0_tx_id = SHDMA_SLAVE_USB1_TX, + .d1_rx_id = SHDMA_SLAVE_USB1_RX, }, }, }; -- cgit v1.2.2 From a88769cde24fcef11219cf99193ee558d1028217 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 27 Jul 2011 10:11:28 -0700 Subject: firmware: fix google/gsmi.c build warning Modify function parameter type to match expected type. Fixes a build warning: drivers/firmware/google/gsmi.c:473: warning: initialization from incompatible pointer type Signed-off-by: Randy Dunlap Cc: Mike Waychison Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/google/gsmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c index 68810fd1a59d..aa83de9db1b9 100644 --- a/drivers/firmware/google/gsmi.c +++ b/drivers/firmware/google/gsmi.c @@ -420,7 +420,7 @@ static efi_status_t gsmi_get_next_variable(unsigned long *name_size, static efi_status_t gsmi_set_variable(efi_char16_t *name, efi_guid_t *vendor, - unsigned long attr, + u32 attr, unsigned long data_size, void *data) { -- cgit v1.2.2 From 7de636fa25c19fc4187f85f8325c50b1b21a6d8b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 27 Jul 2011 12:11:25 -0700 Subject: driver core: fix kernel-doc warning in platform.c Warning(drivers/base/platform.c:50): No description found for parameter 'pdev' Warning(drivers/base/platform.c:50): Excess function parameter 'dev' description in 'arch_setup_pdev_archdata' Signed-off-by: Randy Dunlap Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 0cad9c7f6bb5..99a5272d7c2f 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -33,7 +33,7 @@ EXPORT_SYMBOL_GPL(platform_bus); /** * arch_setup_pdev_archdata - Allow manipulation of archdata before its used - * @dev: platform device + * @pdev: platform device * * This is called before platform_device_add() such that any pdev_archdata may * be setup before the platform_notifier is called. So if a user needs to -- cgit v1.2.2 From f9e0b159dbff693bacb64a929e04f442df985b50 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Thu, 21 Jul 2011 13:16:19 -0400 Subject: drivers/base/devtmpfs.c: correct annotation of `setup_done' This fixes the following section mismatch issue: WARNING: vmlinux.o(.text+0x1192bf): Section mismatch in reference from the function devtmpfsd() to the variable .init.data:setup_done The function devtmpfsd() references the variable __initdata setup_done. This is often because devtmpfsd lacks a __initdata annotation or the annotation of setup_done is wrong. WARNING: vmlinux.o(.text+0x119342): Section mismatch in reference from the function devtmpfsd() to the variable .init.data:setup_done The function devtmpfsd() references the variable __initdata setup_done. This is often because devtmpfsd lacks a __initdata annotation or the annotation of setup_done is wrong. Signed-off-by: Arnaud Lacombe Signed-off-by: Greg Kroah-Hartman --- drivers/base/devtmpfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c index 33e1bed68fdd..a4760e095ff5 100644 --- a/drivers/base/devtmpfs.c +++ b/drivers/base/devtmpfs.c @@ -376,7 +376,7 @@ int devtmpfs_mount(const char *mntdir) return err; } -static __initdata DECLARE_COMPLETION(setup_done); +static DECLARE_COMPLETION(setup_done); static int handle(const char *name, mode_t mode, struct device *dev) { -- cgit v1.2.2 From b882fc1b03d46e67ffe06133f4f4532db6e8dd0d Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 28 Jul 2011 08:50:38 +0900 Subject: serial: samsung: Fix build error drivers/tty/serial/samsung.c: In function 's3c24xx_serial_init': drivers/tty/serial/samsung.c:1237: error: lvalue required as unary '&' operand Cc: Greg Kroah-Hartman Signed-off-by: Kukjin Kim Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index afc629423152..6edafb5ace18 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1225,15 +1225,19 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = { .suspend = s3c24xx_serial_suspend, .resume = s3c24xx_serial_resume, }; +#define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops) + #else /* !CONFIG_PM_SLEEP */ -#define s3c24xx_serial_pm_ops NULL + +#define SERIAL_SAMSUNG_PM_OPS NULL #endif /* CONFIG_PM_SLEEP */ int s3c24xx_serial_init(struct platform_driver *drv, struct s3c24xx_uart_info *info) { dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); - drv->driver.pm = &s3c24xx_serial_pm_ops; + + drv->driver.pm = SERIAL_SAMSUNG_PM_OPS; return platform_driver_register(drv); } -- cgit v1.2.2 From 5ac04bf190e6f8b17238aef179ebd7f2bdfec919 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Wed, 3 Aug 2011 16:46:48 +0800 Subject: xHCI: fix port U3 status check condition Fix the port U3 status check when Clear PORT_SUSPEND Feature. The port status should be masked with PORT_PLS_MASK to check if it's in U3 state. This should be backported to kernels as old as 2.6.37. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0be788cc2fdb..cddcdccadbf7 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -664,7 +664,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_dbg(xhci, "PORTSC %04x\n", temp); if (temp & PORT_RESET) goto error; - if (temp & XDEV_U3) { + if ((temp & PORT_PLS_MASK) == XDEV_U3) { if ((temp & PORT_PE) == 0) goto error; -- cgit v1.2.2 From 8a8ff2f9399b23b968901f585ccb5a70a537c5ae Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Wed, 3 Aug 2011 16:46:49 +0800 Subject: xHCI: report USB2 port in resuming as suspend When a USB2 port initiate a remote wakeup, software shall ensure that resume is signaled for at least 20ms, and then write '0' to the PLS field. According to this, xhci driver do the following things: 1. When receive a remote wakeup event in irq_handler, set the resume_done value as jiffies + 20ms, and modify rh_timer to poll root hub status at that time; 2. When receive a GetPortStatus request, if the jiffies is after the resume_done value, clear the resume signal and resume_done. However, if usb_port_resume() is called before the rh_timer triggered, it will indicate the port as Suspend Cleared and skip the clear resume signal part. The device will fail the usb_get_status request in finish_port_resume(), and usbcore will try a reset-resume instead. Device will work OK after reset-resume, but resume_done value is not cleared in this case, and xhci_bus_suspend() will fail because when it finds a non-zero resume_done value, it will regard the port as resuming and return -EBUSY. This causes issue on some platforms that the system fail to suspend after remote wakeup from suspend by USB2 devices connected to xHCI port. To fix this issue, report the port status as suspend if the resume is signaling less that 20ms, and usb_port_resume() will wait 25ms and check port status again, so xHCI driver can clear the resume signaling and resume_done value. This should be backported to kernels as old as 2.6.37. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-hub.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index cddcdccadbf7..1e96d1f1fe6b 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -463,11 +463,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, && (temp & PORT_POWER)) status |= USB_PORT_STAT_SUSPEND; } - if ((temp & PORT_PLS_MASK) == XDEV_RESUME) { + if ((temp & PORT_PLS_MASK) == XDEV_RESUME && + !DEV_SUPERSPEED(temp)) { if ((temp & PORT_RESET) || !(temp & PORT_PE)) goto error; - if (!DEV_SUPERSPEED(temp) && time_after_eq(jiffies, - bus_state->resume_done[wIndex])) { + if (time_after_eq(jiffies, + bus_state->resume_done[wIndex])) { xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); bus_state->resume_done[wIndex] = 0; @@ -487,6 +488,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_ring_device(xhci, slot_id); bus_state->port_c_suspend |= 1 << wIndex; bus_state->suspended_ports &= ~(1 << wIndex); + } else { + /* + * The resume has been signaling for less than + * 20ms. Report the port status as SUSPEND, + * let the usbcore check port status again + * and clear resume signaling later. + */ + status |= USB_PORT_STAT_SUSPEND; } } if ((temp & PORT_PLS_MASK) == XDEV_U0 -- cgit v1.2.2 From d13565c12828ce0cd2a3862bf6260164a0653352 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 22 Jul 2011 14:34:34 -0700 Subject: xhci: Fix memory leak during failed enqueue. When the isochronous transfer support was introduced, and the xHCI driver switched to using urb->hcpriv to store an "urb_priv" pointer, a couple of memory leaks were introduced into the URB enqueue function in its error handling paths. xhci_urb_enqueue allocates urb_priv, but it doesn't free it if changing the control endpoint's max packet size fails or the bulk endpoint is in the middle of allocating or deallocating streams. xhci_urb_enqueue also doesn't free urb_priv if any of the four endpoint types' enqueue functions fail. Instead, it expects those functions to free urb_priv if an error occurs. However, the bulk, control, and interrupt enqueue functions do not free urb_priv if the endpoint ring is NULL. It will, however, get freed if prepare_transfer() fails in those enqueue functions. Several of the error paths in the isochronous endpoint enqueue function also fail to free it. xhci_queue_isoc_tx_prepare() doesn't free urb_priv if prepare_ring() indicates there is not enough room for all the isochronous TDs in this URB. If individual isochronous TDs fail to be queued (perhaps due to an endpoint state change), urb_priv is also leaked. This argues that the freeing of urb_priv should be done in the function that allocated it, xhci_urb_enqueue. This patch looks rather ugly, but refactoring the code will have to wait because this patch needs to be backported to stable kernels. This patch should be backported to kernels as old as 2.6.36. Signed-off-by: Sarah Sharp Cc: Andiry Xu Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 5 +---- drivers/usb/host/xhci.c | 21 +++++++++++++++++---- 2 files changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 7113d16e2d3a..9d3f9dd1ad28 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2500,11 +2500,8 @@ static int prepare_transfer(struct xhci_hcd *xhci, if (td_index == 0) { ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb); - if (unlikely(ret)) { - xhci_urb_free_priv(xhci, urb_priv); - urb->hcpriv = NULL; + if (unlikely(ret)) return ret; - } } td->urb = urb; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1c4432d8fc10..8e84acff1134 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1085,8 +1085,11 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) if (urb->dev->speed == USB_SPEED_FULL) { ret = xhci_check_maxpacket(xhci, slot_id, ep_index, urb); - if (ret < 0) + if (ret < 0) { + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; return ret; + } } /* We have a spinlock and interrupts disabled, so we must pass @@ -1097,6 +1100,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) { spin_lock_irqsave(&xhci->lock, flags); @@ -1117,6 +1122,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); } + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else if (usb_endpoint_xfer_int(&urb->ep->desc)) { spin_lock_irqsave(&xhci->lock, flags); @@ -1124,6 +1131,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else { spin_lock_irqsave(&xhci->lock, flags); @@ -1131,18 +1140,22 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } exit: return ret; dying: - xhci_urb_free_priv(xhci, urb_priv); - urb->hcpriv = NULL; xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for " "non-responsive xHCI host.\n", urb->ep->desc.bEndpointAddress, urb); + ret = -ESHUTDOWN; +free_priv: + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; spin_unlock_irqrestore(&xhci->lock, flags); - return -ESHUTDOWN; + return ret; } /* Get the right ring for the given URB. -- cgit v1.2.2 From 522989a27c7badb608155b1f1dea3487ed431f74 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 29 Jul 2011 12:44:32 -0700 Subject: xhci: Fix failed enqueue in the middle of isoch TD. When an isochronous transfer is enqueued, xhci_queue_isoc_tx_prepare() will ensure that there is enough room on the transfer rings for all of the isochronous TDs for that URB. However, when xhci_queue_isoc_tx() is enqueueing individual isoc TDs, the prepare_transfer() function can fail if the endpoint state has changed to disabled, error, or some other unknown state. With the current code, if Nth TD (not the first TD) fails, the ring is left in a sorry state. The partially enqueued TDs are left on the ring, and the first TRB of the TD is not given back to the hardware. The enqueue pointer is left on the TRB after the last successfully enqueued TD. This means the ring is basically useless. Any new transfers will be enqueued after the failed TDs, which the hardware will never read because the cycle bit indicates it does not own them. The ring will fill up with untransferred TDs, and the endpoint will be basically unusable. The untransferred TDs will also remain on the TD list. Since the td_list is a FIFO, this basically means the ring handler will be waiting on TDs that will never be completed (or worse, dereference memory that doesn't exist any more). Change the code to clean up the isochronous ring after a failed transfer. If the first TD failed, simply return and allow the xhci_urb_enqueue function to free the urb_priv. If the Nth TD failed, first remove the TDs from the td_list. Then convert the TRBs that were enqueued into No-op TRBs. Make sure to flip the cycle bit on all enqueued TRBs (including any link TRBs in the middle or between TDs), but leave the cycle bit of the first TRB (which will show software-owned) intact. Then move the ring enqueue pointer back to the first TRB and make sure to change the xhci_ring's cycle state to what is appropriate for that ring segment. This ensures that the No-op TRBs will be overwritten by subsequent TDs, and the hardware will not start executing random TRBs because the cycle bit was left as hardware-owned. This bug is unlikely to be hit, but it was something I noticed while tracking down the watchdog timer issue. I verified that the fix works by injecting some errors on the 250th isochronous URB queued, although I could not verify that the ring is in the correct state because uvcvideo refused to talk to the device after the first usb_submit_urb() failed. Ring debugging shows that the ring looks correct, however. This patch should be backported to kernels as old as 2.6.36. Signed-off-by: Sarah Sharp Cc: Andiry Xu Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 50 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 44 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9d3f9dd1ad28..f72149b666b1 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -514,8 +514,12 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, (unsigned long long) addr); } +/* flip_cycle means flip the cycle bit of all but the first and last TRB. + * (The last TRB actually points to the ring enqueue pointer, which is not part + * of this TD.) This is used to remove partially enqueued isoc TDs from a ring. + */ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, - struct xhci_td *cur_td) + struct xhci_td *cur_td, bool flip_cycle) { struct xhci_segment *cur_seg; union xhci_trb *cur_trb; @@ -528,6 +532,12 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, * leave the pointers intact. */ cur_trb->generic.field[3] &= cpu_to_le32(~TRB_CHAIN); + /* Flip the cycle bit (link TRBs can't be the first + * or last TRB). + */ + if (flip_cycle) + cur_trb->generic.field[3] ^= + cpu_to_le32(TRB_CYCLE); xhci_dbg(xhci, "Cancel (unchain) link TRB\n"); xhci_dbg(xhci, "Address = %p (0x%llx dma); " "in seg %p (0x%llx dma)\n", @@ -541,6 +551,11 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, cur_trb->generic.field[2] = 0; /* Preserve only the cycle bit of this TRB */ cur_trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE); + /* Flip the cycle bit except on the first or last TRB */ + if (flip_cycle && cur_trb != cur_td->first_trb && + cur_trb != cur_td->last_trb) + cur_trb->generic.field[3] ^= + cpu_to_le32(TRB_CYCLE); cur_trb->generic.field[3] |= cpu_to_le32( TRB_TYPE(TRB_TR_NOOP)); xhci_dbg(xhci, "Cancel TRB %p (0x%llx dma) " @@ -719,7 +734,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, cur_td->urb->stream_id, cur_td, &deq_state); else - td_to_noop(xhci, ep_ring, cur_td); + td_to_noop(xhci, ep_ring, cur_td, false); remove_finished_td: /* * The event handler won't see a completion for this TD anymore, @@ -3223,6 +3238,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, start_trb = &ep_ring->enqueue->generic; start_cycle = ep_ring->cycle_state; + urb_priv = urb->hcpriv; /* Queue the first TRB, even if it's zero-length */ for (i = 0; i < num_tds; i++) { unsigned int total_packet_count; @@ -3246,12 +3262,13 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, trbs_per_td, urb, i, mem_flags); - if (ret < 0) - return ret; + if (ret < 0) { + if (i == 0) + return ret; + goto cleanup; + } - urb_priv = urb->hcpriv; td = urb_priv->td[i]; - for (j = 0; j < trbs_per_td; j++) { u32 remainder = 0; field = TRB_TBC(burst_count) | TRB_TLBPC(residue); @@ -3341,6 +3358,27 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, start_cycle, start_trb); return 0; +cleanup: + /* Clean up a partially enqueued isoc transfer. */ + + for (i--; i >= 0; i--) + list_del(&urb_priv->td[i]->td_list); + + /* Use the first TD as a temporary variable to turn the TDs we've queued + * into No-ops with a software-owned cycle bit. That way the hardware + * won't accidentally start executing bogus TDs when we partially + * overwrite them. td->first_trb and td->start_seg are already set. + */ + urb_priv->td[0]->last_trb = ep_ring->enqueue; + /* Every TRB except the first & last will have its cycle bit flipped. */ + td_to_noop(xhci, ep_ring, urb_priv->td[0], true); + + /* Reset the ring enqueue back to the first TRB and its cycle bit. */ + ep_ring->enqueue = urb_priv->td[0]->first_trb; + ep_ring->enq_seg = urb_priv->td[0]->start_seg; + ep_ring->cycle_state = start_cycle; + usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); + return ret; } /* -- cgit v1.2.2 From 585df1d90cb07a02ca6c7a7d339e56e46d50dafb Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 2 Aug 2011 15:43:40 -0700 Subject: xhci: Remove TDs from TD lists when URBs are canceled. When a driver tries to cancel an URB, and the host controller is dying, xhci_urb_dequeue will giveback the URB without removing the xhci_tds that comprise that URB from the td_list or the cancelled_td_list. This can cause a race condition between the driver calling URB dequeue and the stop endpoint command watchdog timer. If the timer fires on a dying host, and a driver attempts to resubmit while the watchdog timer has dropped the xhci->lock to giveback a cancelled URB, URBs may be given back by the xhci_urb_dequeue() function. At that point, the URB's priv pointer will be freed and set to NULL, but the TDs will remain on the td_list. This will cause an oops in xhci_giveback_urb_in_irq() when the watchdog timer attempts to loop through the endpoints' td_lists, giving back killed URBs. Make sure that xhci_urb_dequeue() removes TDs from the TD lists and canceled TD lists before it gives back the URB. This patch should be backported to kernels as old as 2.6.36. Signed-off-by: Sarah Sharp Cc: Andiry Xu Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 16 ++++++++-------- drivers/usb/host/xhci.c | 7 +++++++ 2 files changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f72149b666b1..b2d654b7477e 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -741,7 +741,7 @@ remove_finished_td: * so remove it from the endpoint ring's TD list. Keep it in * the cancelled TD list for URB completion later. */ - list_del(&cur_td->td_list); + list_del_init(&cur_td->td_list); } last_unlinked_td = cur_td; xhci_stop_watchdog_timer_in_irq(xhci, ep); @@ -769,7 +769,7 @@ remove_finished_td: do { cur_td = list_entry(ep->cancelled_td_list.next, struct xhci_td, cancelled_td_list); - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); /* Clean up the cancelled URB */ /* Doesn't matter what we pass for status, since the core will @@ -877,9 +877,9 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) cur_td = list_first_entry(&ring->td_list, struct xhci_td, td_list); - list_del(&cur_td->td_list); + list_del_init(&cur_td->td_list); if (!list_empty(&cur_td->cancelled_td_list)) - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN, "killed"); } @@ -888,7 +888,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) &temp_ep->cancelled_td_list, struct xhci_td, cancelled_td_list); - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN, "killed"); } @@ -1580,10 +1580,10 @@ td_cleanup: else *status = 0; } - list_del(&td->td_list); + list_del_init(&td->td_list); /* Was this TD slated to be cancelled but completed anyway? */ if (!list_empty(&td->cancelled_td_list)) - list_del(&td->cancelled_td_list); + list_del_init(&td->cancelled_td_list); urb_priv->td_cnt++; /* Giveback the urb when all the tds are completed */ @@ -3362,7 +3362,7 @@ cleanup: /* Clean up a partially enqueued isoc transfer. */ for (i--; i >= 0; i--) - list_del(&urb_priv->td[i]->td_list); + list_del_init(&urb_priv->td[i]->td_list); /* Use the first TD as a temporary variable to turn the TDs we've queued * into No-ops with a software-owned cycle bit. That way the hardware diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8e84acff1134..3a0f695138f4 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1252,6 +1252,13 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_dbg(xhci, "HW died, freeing TD.\n"); urb_priv = urb->hcpriv; + for (i = urb_priv->td_cnt; i < urb_priv->length; i++) { + td = urb_priv->td[i]; + if (!list_empty(&td->td_list)) + list_del_init(&td->td_list); + if (!list_empty(&td->cancelled_td_list)) + list_del_init(&td->cancelled_td_list); + } usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&xhci->lock, flags); -- cgit v1.2.2 From 567b20e02bc1b2bcd69e8bfc022dec3da3fefb89 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 12 Jul 2011 19:05:29 +0800 Subject: usb: gadget: s3c2410_udc: fix unterminated platform_device_id table platform_device_id structures need a NULL terminating entry, add it. Signed-off-by: Axel Lin Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c2410_udc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 85c1b0d66293..8d31848aab09 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -2060,6 +2060,7 @@ static int s3c2410_udc_resume(struct platform_device *pdev) static const struct platform_device_id s3c_udc_ids[] = { { "s3c2410-usbgadget", }, { "s3c2440-usbgadget", }, + { } }; MODULE_DEVICE_TABLE(platform, s3c_udc_ids); -- cgit v1.2.2 From aba1350fdac7cb52f86e6818addb26d03b3ef9bc Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 19 Jul 2011 21:47:01 +0200 Subject: usb: gadget: fusb300: remove #if 0 block The code in this block is unused and the Author is fine with removing: | These functions were used to debug unstable hw fifo while developing | fusb300. It's much more stable now. | So these functions can be removed. Cc: "Wendy Yuan-Hsin Chen" Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fusb300_udc.c | 101 --------------------------------------- 1 file changed, 101 deletions(-) diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 24a924330c81..4ec888f90002 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -609,107 +609,6 @@ void fusb300_rdcxf(struct fusb300 *fusb300, } } -#if 0 -static void fusb300_dbg_fifo(struct fusb300_ep *ep, - u8 entry, u16 length) -{ - u32 reg; - u32 i = 0; - u32 j = 0; - - reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM); - reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) | - FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG); - reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) | - FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG); - iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM); - - for (i = 0; i < (length >> 2); i++) { - if (i * 4 == 1024) - break; - reg = ioread32(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i * 4); - printk(KERN_DEBUG" 0x%-8x", reg); - j++; - if ((j % 4) == 0) - printk(KERN_DEBUG "\n"); - } - - if (length % 4) { - reg = ioread32(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i * 4); - printk(KERN_DEBUG " 0x%x\n", reg); - } - - if ((j % 4) != 0) - printk(KERN_DEBUG "\n"); - - fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM, - FUSB300_GTM_TST_FIFO_DEG); -} - -static void fusb300_cmp_dbg_fifo(struct fusb300_ep *ep, - u8 entr