From d21d52d4a155e36d4dc93d642cd52cb63f7ef91b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 5 Feb 2009 16:13:32 +0800 Subject: kbuild,setlocalversion: shorten the make time when using svn Don't bother doing `svn st` as it takes a retarded amount of time when the source is cold Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Sam Ravnborg --- scripts/setlocalversion | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/scripts/setlocalversion b/scripts/setlocalversion index f6946cf99ce1..f1c4b35bc324 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -58,14 +58,7 @@ fi # Check for svn and a svn repo. if rev=`svn info 2>/dev/null | grep '^Last Changed Rev'`; then rev=`echo $rev | awk '{print $NF}'` - changes=`svn status 2>/dev/null | grep '^[AMD]' | wc -l` - - # Are there uncommitted changes? - if [ $changes != 0 ]; then - printf -- '-svn%s%s' "$rev" -dirty - else - printf -- '-svn%s' "$rev" - fi + printf -- '-svn%s' "$rev" # All done with svn exit -- cgit v1.2.2 From fc370ecfdb37b853bd8e2118c7ad9f99fa9ac5cd Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Wed, 11 Feb 2009 21:10:57 -0800 Subject: kbuild: add vmlinux to kernel rpm We are building an automated system to test kernels weekly and need to provide an rpm to our QA dept. We would like to use the ability to create kernel rpms already in the kernel's Makefile, but need the vmlinux file included in the rpm for later debugging. This patch adds a compressed vmlinux to the kernel rpm when doing a make rpm-pkg or binrpm-pkg and upon install places the vmlinux file in /boot. Signed-off-by: Josh Hunt Signed-off-by: Sam Ravnborg --- scripts/package/mkspec | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/scripts/package/mkspec b/scripts/package/mkspec index 2500886fb90a..ee448cdc6a2b 100755 --- a/scripts/package/mkspec +++ b/scripts/package/mkspec @@ -86,6 +86,14 @@ echo "%endif" echo 'cp System.map $RPM_BUILD_ROOT'"/boot/System.map-$KERNELRELEASE" echo 'cp .config $RPM_BUILD_ROOT'"/boot/config-$KERNELRELEASE" + +echo "%ifnarch ppc64" +echo 'cp vmlinux vmlinux.orig' +echo 'bzip2 -9 vmlinux' +echo 'mv vmlinux.bz2 $RPM_BUILD_ROOT'"/boot/vmlinux-$KERNELRELEASE.bz2" +echo 'mv vmlinux.orig vmlinux' +echo "%endif" + echo "" echo "%clean" echo '#echo -rf $RPM_BUILD_ROOT' -- cgit v1.2.2 From 0bb98e231803860e978c302b9faccaf776881137 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 15 Feb 2009 10:20:30 +0100 Subject: bootgraph: fix for use with dot symbols powerpc has dot symbols, so the dmesg output looks like: <4>[ 0.327310] calling .migration_init+0x0/0x9c @ 1 <4>[ 0.327595] initcall .migration_init+0x0/0x9c returned 1 after 0 usecs The below fixes bootgraph.pl so it handles this correctly. Signed-off-by: Michael Neuling Signed-off-by: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/bootgraph.pl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/bootgraph.pl b/scripts/bootgraph.pl index b0246307aac4..12caa822a232 100644 --- a/scripts/bootgraph.pl +++ b/scripts/bootgraph.pl @@ -51,7 +51,7 @@ my %pidctr; while (<>) { my $line = $_; - if ($line =~ /([0-9\.]+)\] calling ([a-zA-Z0-9\_]+)\+/) { + if ($line =~ /([0-9\.]+)\] calling ([a-zA-Z0-9\_\.]+)\+/) { my $func = $2; if ($done == 0) { $start{$func} = $1; @@ -87,7 +87,7 @@ while (<>) { $count = $count + 1; } - if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_]+)\+.*returned/) { + if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_\.]+)\+.*returned/) { if ($done == 0) { $end{$2} = $1; $maxtime = $1; -- cgit v1.2.2 From 953fae66d124486c9e284806429c52c5402f59ac Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 11 Feb 2009 13:24:09 -0800 Subject: kbuild: fix tags generation of config symbols commit 4f628248a578585472e19e4cba2c604643af8c6c aka "kbuild: reintroduce ALLSOURCE_ARCHS support for tags/cscope" breaks tags generation for Kconfig symbols. Steps to reproduce: make tags vi -t PROC_FS It should jump to 'config PROC_FS' line. Signed-off-by: Alexey Dobriyan Tested-by: Pete Wyckoff Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/tags.sh | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/scripts/tags.sh b/scripts/tags.sh index fdbe78bb5e2b..7e21e9146118 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -76,7 +76,10 @@ all_sources() all_kconfigs() { - find_sources $ALLSOURCE_ARCHS 'Kconfig*' + for arch in $ALLSOURCE_ARCHS; do + find_sources $arch 'Kconfig*' + done + find_other_sources 'Kconfig*' } all_defconfigs() -- cgit v1.2.2 From 5123b327c107db9e560fd62d50c27a3816e5a078 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sun, 25 Jan 2009 18:39:12 +0530 Subject: kbuild: add sys_* entries for syscalls in tags Currently, it is no longer possible to use the tags file to jump to system call function definitions with sys_foo, because the definitions are obscured by use of the SYSCALL_DEFINE* macros. This patch adds the appropriate option to ctags to make it see through the macro. Also, it adds the ENTRY() work already done for Exuberant to Emacs too. Signed-off-by: Rabin Vincent Signed-off-by: Sam Ravnborg --- scripts/tags.sh | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/scripts/tags.sh b/scripts/tags.sh index 7e21e9146118..5bd8b1003d44 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -102,7 +102,8 @@ exuberant() -I ____cacheline_internodealigned_in_smp \ -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \ --extra=+f --c-kinds=+px \ - --regex-asm='/^ENTRY\(([^)]*)\).*/\1/' + --regex-asm='/^ENTRY\(([^)]*)\).*/\1/' \ + --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/' all_kconfigs | xargs $1 -a \ --langdef=kconfig --language-force=kconfig \ @@ -120,7 +121,9 @@ exuberant() emacs() { - all_sources | xargs $1 -a + all_sources | xargs $1 -a \ + --regex='/^ENTRY(\([^)]*\)).*/\1/' \ + --regex='/^SYSCALL_DEFINE[0-9]?(\([^,)]*\).*/sys_\1/' all_kconfigs | xargs $1 -a \ --regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/' -- cgit v1.2.2 From c19ef7fd8e534c870166213e9e30de9c44b34a76 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 15 Feb 2009 11:30:52 +0100 Subject: scripts: add x86 register parser to markup_oops.pl An oops dump also contains the register values. This patch parses these for (32 bit) x86, and then annotates the disassembly with these values; this helps in analysis of the oops by the developer, for example, NULL pointer or other pointer bugs show up clearly this way. Signed-off-by: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/markup_oops.pl | 106 ++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 100 insertions(+), 6 deletions(-) diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl index d40449cafa84..bb2046891c90 100644 --- a/scripts/markup_oops.pl +++ b/scripts/markup_oops.pl @@ -32,6 +32,78 @@ my $module = ""; my $func_offset; my $vmaoffset = 0; +my %regs; + + +sub parse_x86_regs +{ + my ($line) = @_; + if ($line =~ /EAX: ([0-9a-f]+) EBX: ([0-9a-f]+) ECX: ([0-9a-f]+) EDX: ([0-9a-f]+)/) { + $regs{"%eax"} = $1; + $regs{"%ebx"} = $2; + $regs{"%ecx"} = $3; + $regs{"%edx"} = $4; + } + if ($line =~ /ESI: ([0-9a-f]+) EDI: ([0-9a-f]+) EBP: ([0-9a-f]+) ESP: ([0-9a-f]+)/) { + $regs{"%esi"} = $1; + $regs{"%edi"} = $2; + $regs{"%esp"} = $4; + } +} + +sub process_x86_regs +{ + my ($line, $cntr) = @_; + my $str = ""; + if (length($line) < 40) { + return ""; # not an asm istruction + } + + # find the arguments to the instruction + if ($line =~ /([0-9a-zA-Z\,\%\(\)\-\+]+)$/) { + $lastword = $1; + } else { + return ""; + } + + # we need to find the registers that get clobbered, + # since their value is no longer relevant for previous + # instructions in the stream. + + $clobber = $lastword; + # first, remove all memory operands, they're read only + $clobber =~ s/\([a-z0-9\%\,]+\)//g; + # then, remove everything before the comma, thats the read part + $clobber =~ s/.*\,//g; + + # if this is the instruction that faulted, we haven't actually done + # the write yet... nothing is clobbered. + if ($cntr == 0) { + $clobber = ""; + } + + foreach $reg (keys(%regs)) { + my $val = $regs{$reg}; + # first check if we're clobbering this register; if we do + # we print it with a =>, and then delete its value + if ($clobber =~ /$reg/) { + if (length($val) > 0) { + $str = $str . " $reg => $val "; + } + $regs{$reg} = ""; + $val = ""; + } + # now check if we're reading this register + if ($lastword =~ /$reg/) { + if (length($val) > 0) { + $str = $str . " $reg = $val "; + } + } + } + return $str; +} + +# parse the oops while () { my $line = $_; if ($line =~ /EIP: 0060:\[\<([a-z0-9]+)\>\]/) { @@ -46,10 +118,11 @@ while () { if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) { $module = $3; } + parse_x86_regs($line); } my $decodestart = hex($target) - hex($func_offset); -my $decodestop = $decodestart + 8192; +my $decodestop = hex($target) + 8192; if ($target eq "0") { print "No oops found!\n"; print "Usage: \n"; @@ -84,6 +157,7 @@ my $counter = 0; my $state = 0; my $center = 0; my @lines; +my @reglines; sub InRange { my ($address, $target) = @_; @@ -188,16 +262,36 @@ while ($finish < $counter) { my $i; -my $fulltext = ""; + +# start annotating the registers in the asm. +# this goes from the oopsing point back, so that the annotator +# can track (opportunistically) which registers got written and +# whos value no longer is relevant. + +$i = $center; +while ($i >= $start) { + $reglines[$i] = process_x86_regs($lines[$i], $center - $i); + $i = $i - 1; +} + $i = $start; while ($i < $finish) { + my $line; if ($i == $center) { - $fulltext = $fulltext . "*$lines[$i] <----- faulting instruction\n"; + $line = "*$lines[$i] "; } else { - $fulltext = $fulltext . " $lines[$i]\n"; + $line = " $lines[$i] "; + } + print $line; + if (defined($reglines[$i]) && length($reglines[$i]) > 0) { + my $c = 60 - length($line); + while ($c > 0) { print " "; $c = $c - 1; }; + print "| $reglines[$i]"; } + if ($i == $center) { + print "<--- faulting instruction"; + } + print "\n"; $i = $i +1; } -print $fulltext; - -- cgit v1.2.2 From 11df65c3c6f7fdc837a5be8787d31011e8bb93c1 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 15 Feb 2009 11:30:55 +0100 Subject: scripts: add x86 64 bit support to the markup_oops.pl script Signed-off-by: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/markup_oops.pl | 59 ++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 55 insertions(+), 4 deletions(-) diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl index bb2046891c90..528492bcba5b 100644 --- a/scripts/markup_oops.pl +++ b/scripts/markup_oops.pl @@ -1,4 +1,4 @@ -#!/usr/bin/perl -w +#!/usr/bin/perl use File::Basename; @@ -29,7 +29,7 @@ my $filename = $vmlinux_name; my $target = "0"; my $function; my $module = ""; -my $func_offset; +my $func_offset = 0; my $vmaoffset = 0; my %regs; @@ -49,6 +49,39 @@ sub parse_x86_regs $regs{"%edi"} = $2; $regs{"%esp"} = $4; } + if ($line =~ /RAX: ([0-9a-f]+) RBX: ([0-9a-f]+) RCX: ([0-9a-f]+)/) { + $regs{"%eax"} = $1; + $regs{"%ebx"} = $2; + $regs{"%ecx"} = $3; + } + if ($line =~ /RDX: ([0-9a-f]+) RSI: ([0-9a-f]+) RDI: ([0-9a-f]+)/) { + $regs{"%edx"} = $1; + $regs{"%esi"} = $2; + $regs{"%edi"} = $3; + } + if ($line =~ /RBP: ([0-9a-f]+) R08: ([0-9a-f]+) R09: ([0-9a-f]+)/) { + $regs{"%r08"} = $2; + $regs{"%r09"} = $3; + } + if ($line =~ /R10: ([0-9a-f]+) R11: ([0-9a-f]+) R12: ([0-9a-f]+)/) { + $regs{"%r10"} = $1; + $regs{"%r11"} = $2; + $regs{"%r12"} = $3; + } + if ($line =~ /R13: ([0-9a-f]+) R14: ([0-9a-f]+) R15: ([0-9a-f]+)/) { + $regs{"%r13"} = $1; + $regs{"%r14"} = $2; + $regs{"%r15"} = $3; + } +} + +sub reg_name +{ + my ($reg) = @_; + $reg =~ s/r(.)x/e\1x/; + $reg =~ s/r(.)i/e\1i/; + $reg =~ s/r(.)p/e\1p/; + return $reg; } sub process_x86_regs @@ -83,10 +116,18 @@ sub process_x86_regs } foreach $reg (keys(%regs)) { + my $clobberprime = reg_name($clobber); + my $lastwordprime = reg_name($lastword); my $val = $regs{$reg}; + if ($val =~ /^[0]+$/) { + $val = "0"; + } else { + $val =~ s/^0*//; + } + # first check if we're clobbering this register; if we do # we print it with a =>, and then delete its value - if ($clobber =~ /$reg/) { + if ($clobber =~ /$reg/ || $clobberprime =~ /$reg/) { if (length($val) > 0) { $str = $str . " $reg => $val "; } @@ -94,7 +135,7 @@ sub process_x86_regs $val = ""; } # now check if we're reading this register - if ($lastword =~ /$reg/) { + if ($lastword =~ /$reg/ || $lastwordprime =~ /$reg/) { if (length($val) > 0) { $str = $str . " $reg = $val "; } @@ -109,15 +150,25 @@ while () { if ($line =~ /EIP: 0060:\[\<([a-z0-9]+)\>\]/) { $target = $1; } + if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) { + $target = $1; + } if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) { $function = $1; $func_offset = $2; } + if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) { + $function = $1; + $func_offset = $2; + } # check if it's a module if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) { $module = $3; } + if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) { + $module = $3; + } parse_x86_regs($line); } -- cgit v1.2.2 From 929799973ba4a40f7b8001e9cc461c13d04c4124 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 10 Jan 2009 04:56:13 +0100 Subject: kbuild: create the source symlink earlier in the objdir It's useful to already have the source symlink in a objdir when one just runs make *config. Then one can do mkdir obj-allyes cd obj-allyes make -C ../sourcedir O=$(pwd) allyesconfig ./source/scripts/config --disable debug_info make CC=icecc -j18 without having to interrupt the make first just to get the source symlink. Signed-off-by: Andi Kleen [sam: deleted the other source symlink statement] Signed-off-by: Sam Ravnborg --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 22d758495ad2..59cf6dacec07 100644 --- a/Makefile +++ b/Makefile @@ -389,6 +389,7 @@ PHONY += outputmakefile # output directory. outputmakefile: ifneq ($(KBUILD_SRC),) + $(Q)ln -fsn $(srctree) source $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) endif @@ -946,7 +947,6 @@ ifneq ($(KBUILD_SRC),) mkdir -p include2; \ ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ fi - ln -fsn $(srctree) source endif # prepare2 creates a makefile if using a separate output directory -- cgit v1.2.2