From ace08c3c4403140e5ce82116c8f2acb38f58f61d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:20:38 +0100 Subject: tty:cyclades, load firmware even on Ze Ze needs firmware to be loaded as well as Zo. Move cyz_load_fw one level upper to achieve that. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 1fdb9f657d8f..bde24583bcfc 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -5043,6 +5043,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, nchan = ZE_V1_NPORTS; } else { card_name = "Cyclades-8Zo"; + nchan = 8; #ifdef CY_PCI_DEBUG if (mailbox == ZO_V1) { @@ -5065,15 +5066,11 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, */ if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) cy_writel(addr2 + ID_ADDRESS, 0L); - - retval = cyz_load_fw(pdev, addr2, addr0, irq); - if (retval) - goto err_unmap; - /* This must be a Cyclades-8Zo/PCI. The extendable - version will have a different device_id and will - be allocated its maximum number of ports. */ - nchan = 8; } + + retval = cyz_load_fw(pdev, addr2, addr0, irq); + if (retval) + goto err_unmap; } if ((cy_next_channel + nchan) > NR_PORTS) { -- cgit v1.2.2 From eca1b592d600bb2b7d24b66e4106de1e751ae510 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:21:30 +0100 Subject: tty: cyclades, don't kill FW Don't reset the PLX chip after FW load, which effectively kills the FW, so that user had to boot manually. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index bde24583bcfc..6d524391e994 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -4932,8 +4932,6 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | 0x00030800UL); - plx_init(pdev, irq, ctl_addr); - return 0; err_rel: release_firmware(fw); -- cgit v1.2.2 From 65a29f60e121ae5116ac1736b50a237bf2db3225 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:22:27 +0100 Subject: tty: cyclades, remove spurious check in ISR No need to check if dev_id is NULL, it never is. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 6d524391e994..ccf68a9e24b7 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -1737,14 +1737,6 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id) { struct cyclades_card *cinfo = dev_id; - if (unlikely(cinfo == NULL)) { -#ifdef CY_DEBUG_INTERRUPTS - printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n", - irq); -#endif - return IRQ_NONE; /* spurious interrupt */ - } - if (unlikely(!ISZLOADED(*cinfo))) { #ifdef CY_DEBUG_INTERRUPTS printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " -- cgit v1.2.2 From fcc8ac1825d3d0fb81f73bc1a80ebc863168bb56 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:24:17 +0100 Subject: tty: Add carrier processing on close to the tty_port core Some drivers implement this internally, others miss it out. Push the behaviour into the core code as that way everyone will do it consistently. Update the dtr rts method to raise or lower depending upon flags. Having a single method in this style fits most of the implementations more cleanly than two funtions. We need this in place before we tackle the USB side Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/epca.c | 4 ++-- drivers/char/isicom.c | 19 +++++++++++++------ drivers/char/istallion.c | 8 ++++---- drivers/char/mxser.c | 12 ++++++++---- drivers/char/pcmcia/synclink_cs.c | 11 +++++++---- drivers/char/rocket.c | 13 +++++++++---- drivers/char/stallion.c | 6 +++--- drivers/char/synclink.c | 9 ++++++--- drivers/char/synclink_gt.c | 9 ++++++--- drivers/char/synclinkmp.c | 9 ++++++--- drivers/char/tty_port.c | 27 +++++++++++++++++++++++---- include/linux/tty.h | 3 ++- 12 files changed, 89 insertions(+), 41 deletions(-) diff --git a/drivers/char/epca.c b/drivers/char/epca.c index af7c13ca9493..8797b7742350 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -745,7 +745,7 @@ static int epca_carrier_raised(struct tty_port *port) return 0; } -static void epca_raise_dtr_rts(struct tty_port *port) +static void epca_dtr_rts(struct tty_port *port, int onoff) { } @@ -925,7 +925,7 @@ static const struct tty_operations pc_ops = { static const struct tty_port_operations epca_port_ops = { .carrier_raised = epca_carrier_raised, - .raise_dtr_rts = epca_raise_dtr_rts, + .dtr_rts = epca_dtr_rts, }; static int info_open(struct tty_struct *tty, struct file *filp) diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index a59eac584d16..4d745a89504f 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -329,7 +329,7 @@ static inline void drop_rts(struct isi_port *port) /* card->lock MUST NOT be held */ -static void isicom_raise_dtr_rts(struct tty_port *port) +static void isicom_dtr_rts(struct tty_port *port, int on) { struct isi_port *ip = container_of(port, struct isi_port, port); struct isi_board *card = ip->card; @@ -339,10 +339,17 @@ static void isicom_raise_dtr_rts(struct tty_port *port) if (!lock_card(card)) return; - outw(0x8000 | (channel << card->shift_count) | 0x02, base); - outw(0x0f04, base); - InterruptTheCard(base); - ip->status |= (ISI_DTR | ISI_RTS); + if (on) { + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0f04, base); + InterruptTheCard(base); + ip->status |= (ISI_DTR | ISI_RTS); + } else { + outw(0x8000 | (channel << card->shift_count) | 0x02, base); + outw(0x0C04, base); + InterruptTheCard(base); + ip->status &= ~(ISI_DTR | ISI_RTS); + } unlock_card(card); } @@ -1339,7 +1346,7 @@ static const struct tty_operations isicom_ops = { static const struct tty_port_operations isicom_port_ops = { .carrier_raised = isicom_carrier_raised, - .raise_dtr_rts = isicom_raise_dtr_rts, + .dtr_rts = isicom_dtr_rts, }; static int __devinit reset_card(struct pci_dev *pdev, diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index fff19f7e29d2..e18800c400b1 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -1140,14 +1140,14 @@ static int stli_carrier_raised(struct tty_port *port) return (portp->sigs & TIOCM_CD) ? 1 : 0; } -static void stli_raise_dtr_rts(struct tty_port *port) +static void stli_dtr_rts(struct tty_port *port, int on) { struct stliport *portp = container_of(port, struct stliport, port); struct stlibrd *brdp = stli_brds[portp->brdnr]; - stli_mkasysigs(&portp->asig, 1, 1); + stli_mkasysigs(&portp->asig, on, on); if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig, sizeof(asysigs_t), 0) < 0) - printk(KERN_WARNING "istallion: dtr raise failed.\n"); + printk(KERN_WARNING "istallion: dtr set failed.\n"); } @@ -4417,7 +4417,7 @@ static const struct tty_operations stli_ops = { static const struct tty_port_operations stli_port_ops = { .carrier_raised = stli_carrier_raised, - .raise_dtr_rts = stli_raise_dtr_rts, + .dtr_rts = stli_dtr_rts, }; /*****************************************************************************/ diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 13f8871e5b21..9533f43a30bb 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -547,14 +547,18 @@ static int mxser_carrier_raised(struct tty_port *port) return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; } -static void mxser_raise_dtr_rts(struct tty_port *port) +static void mxser_dtr_rts(struct tty_port *port, int on) { struct mxser_port *mp = container_of(port, struct mxser_port, port); unsigned long flags; spin_lock_irqsave(&mp->slock, flags); - outb(inb(mp->ioaddr + UART_MCR) | - UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + if (on) + outb(inb(mp->ioaddr + UART_MCR) | + UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + else + outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS), + mp->ioaddr + UART_MCR); spin_unlock_irqrestore(&mp->slock, flags); } @@ -2356,7 +2360,7 @@ static const struct tty_operations mxser_ops = { struct tty_port_operations mxser_port_ops = { .carrier_raised = mxser_carrier_raised, - .raise_dtr_rts = mxser_raise_dtr_rts, + .dtr_rts = mxser_dtr_rts, }; /* diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 19d79fc54461..77b364889224 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -383,7 +383,7 @@ static void async_mode(MGSLPC_INFO *info); static void tx_timeout(unsigned long context); static int carrier_raised(struct tty_port *port); -static void raise_dtr_rts(struct tty_port *port); +static void dtr_rts(struct tty_port *port, int onoff); #if SYNCLINK_GENERIC_HDLC #define dev_to_port(D) (dev_to_hdlc(D)->priv) @@ -513,7 +513,7 @@ static void ldisc_receive_buf(struct tty_struct *tty, static const struct tty_port_operations mgslpc_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts + .dtr_rts = dtr_rts }; static int mgslpc_probe(struct pcmcia_device *link) @@ -2528,13 +2528,16 @@ static int carrier_raised(struct tty_port *port) return 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int onoff) { MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); unsigned long flags; spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + if (onoff) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~SerialSignal_RTS + SerialSignal_DTR; set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index f59fc5cea067..7399188049d8 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -872,11 +872,16 @@ static int carrier_raised(struct tty_port *port) return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { struct r_port *info = container_of(port, struct r_port, port); - sSetDTR(&info->channel); - sSetRTS(&info->channel); + if (on) { + sSetDTR(&info->channel); + sSetRTS(&info->channel); + } else { + sClrDTR(&info->channel); + sClrRTS(&info->channel); + } } /* @@ -2250,7 +2255,7 @@ static const struct tty_operations rocket_ops = { static const struct tty_port_operations rocket_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; /* diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 2ad813a801dc..53e504f41b20 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -772,11 +772,11 @@ static int stl_carrier_raised(struct tty_port *port) return (portp->sigs & TIOCM_CD) ? 1 : 0; } -static void stl_raise_dtr_rts(struct tty_port *port) +static void stl_dtr_rts(struct tty_port *port, int on) { struct stlport *portp = container_of(port, struct stlport, port); /* Takes brd_lock internally */ - stl_setsignals(portp, 1, 1); + stl_setsignals(portp, on, on); } /*****************************************************************************/ @@ -2547,7 +2547,7 @@ static const struct tty_operations stl_ops = { static const struct tty_port_operations stl_port_ops = { .carrier_raised = stl_carrier_raised, - .raise_dtr_rts = stl_raise_dtr_rts, + .dtr_rts = stl_dtr_rts, }; /*****************************************************************************/ diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index afd0b26ca056..afded3a2379c 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -3247,13 +3247,16 @@ static int carrier_raised(struct tty_port *port) return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { struct mgsl_struct *info = container_of(port, struct mgsl_struct, port); unsigned long flags; spin_lock_irqsave(&info->irq_spinlock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + if (on) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); usc_set_serial_signals(info); spin_unlock_irqrestore(&info->irq_spinlock,flags); } @@ -4258,7 +4261,7 @@ static void mgsl_add_device( struct mgsl_struct *info ) static const struct tty_port_operations mgsl_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 5e256494686a..67986ea0d479 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -3099,13 +3099,16 @@ static int carrier_raised(struct tty_port *port) return (info->signals & SerialSignal_DCD) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { unsigned long flags; struct slgt_info *info = container_of(port, struct slgt_info, port); spin_lock_irqsave(&info->lock,flags); - info->signals |= SerialSignal_RTS + SerialSignal_DTR; + if (on) + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -3419,7 +3422,7 @@ static void add_device(struct slgt_info *info) static const struct tty_port_operations slgt_port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; /* diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 26de60efe4b2..6f727e3c53ad 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -3277,13 +3277,16 @@ static int carrier_raised(struct tty_port *port) return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; } -static void raise_dtr_rts(struct tty_port *port) +static void dtr_rts(struct tty_port *port, int on) { SLMP_INFO *info = container_of(port, SLMP_INFO, port); unsigned long flags; spin_lock_irqsave(&info->lock,flags); - info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + if (on) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } @@ -3746,7 +3749,7 @@ static void add_device(SLMP_INFO *info) static const struct tty_port_operations port_ops = { .carrier_raised = carrier_raised, - .raise_dtr_rts = raise_dtr_rts, + .dtr_rts = dtr_rts, }; /* Allocate and initialize a device instance structure diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 9b8004c72686..926d4a5593fa 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -137,7 +137,7 @@ int tty_port_carrier_raised(struct tty_port *port) EXPORT_SYMBOL(tty_port_carrier_raised); /** - * tty_port_raise_dtr_rts - Riase DTR/RTS + * tty_port_raise_dtr_rts - Raise DTR/RTS * @port: tty port * * Wrapper for the DTR/RTS raise logic. For the moment this is used @@ -147,11 +147,27 @@ EXPORT_SYMBOL(tty_port_carrier_raised); void tty_port_raise_dtr_rts(struct tty_port *port) { - if (port->ops->raise_dtr_rts) - port->ops->raise_dtr_rts(port); + if (port->ops->dtr_rts) + port->ops->dtr_rts(port, 1); } EXPORT_SYMBOL(tty_port_raise_dtr_rts); +/** + * tty_port_lower_dtr_rts - Lower DTR/RTS + * @port: tty port + * + * Wrapper for the DTR/RTS raise logic. For the moment this is used + * to hide some internal details. This will eventually become entirely + * internal to the tty port. + */ + +void tty_port_lower_dtr_rts(struct tty_port *port) +{ + if (port->ops->dtr_rts) + port->ops->dtr_rts(port, 0); +} +EXPORT_SYMBOL(tty_port_lower_dtr_rts); + /** * tty_port_block_til_ready - Waiting logic for tty open * @port: the tty port being opened @@ -167,7 +183,7 @@ EXPORT_SYMBOL(tty_port_raise_dtr_rts); * - port flags and counts * * The passed tty_port must implement the carrier_raised method if it can - * do carrier detect and the raise_dtr_rts method if it supports software + * do carrier detect and the dtr_rts method if it supports software * management of these lines. Note that the dtr/rts raise is done each * iteration as a hangup may have previously dropped them while we wait. */ @@ -302,6 +318,9 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) tty_ldisc_flush(tty); + if (tty->termios->c_cflag & HUPCL) + tty_port_lower_dtr_rts(port); + spin_lock_irqsave(&port->lock, flags); tty->closing = 0; diff --git a/include/linux/tty.h b/include/linux/tty.h index fc39db95499f..98694364c96f 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -185,7 +185,7 @@ struct tty_port; struct tty_port_operations { /* Return 1 if the carrier is raised */ int (*carrier_raised)(struct tty_port *port); - void (*raise_dtr_rts)(struct tty_port *port); + void (*dtr_rts)(struct tty_port *port, int raise); }; struct tty_port { @@ -438,6 +438,7 @@ extern struct tty_struct *tty_port_tty_get(struct tty_port *port); extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty); extern int tty_port_carrier_raised(struct tty_port *port); extern void tty_port_raise_dtr_rts(struct tty_port *port); +extern void tty_port_lower_dtr_rts(struct tty_port *port); extern void tty_port_hangup(struct tty_port *port); extern int tty_port_block_til_ready(struct tty_port *port, struct tty_struct *tty, struct file *filp); -- cgit v1.2.2 From 1ec739be75a6cb961a46ba0b1982d0edb7f27558 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:25:25 +0100 Subject: tty: Implement a drain delay in the tty port We need this for devices that cannot flush and wait, but which do not order data and modem events. Without it we will hang up before all the data clears the hardware. Needed for the USB changes. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_port.c | 11 +++++++++++ include/linux/tty.h | 3 +++ 2 files changed, 14 insertions(+) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 926d4a5593fa..4d08b6d27c28 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -308,6 +308,17 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f if (port->flags & ASYNC_INITIALIZED && port->closing_wait != ASYNC_CLOSING_WAIT_NONE) tty_wait_until_sent(tty, port->closing_wait); + if (port->drain_delay) { + unsigned int bps = tty_get_baud_rate(tty); + long timeout; + + if (bps > 1200) + timeout = max_t(long, (HZ * 10 * port->drain_delay) / bps, + HZ / 10); + else + timeout = 2 * HZ; + schedule_timeout_interruptible(timeout); + } return 1; } EXPORT_SYMBOL(tty_port_close_start); diff --git a/include/linux/tty.h b/include/linux/tty.h index 98694364c96f..bed5a3d40307 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -201,6 +201,9 @@ struct tty_port { unsigned char *xmit_buf; /* Optional buffer */ int close_delay; /* Close port delay */ int closing_wait; /* Delay for output */ + int drain_delay; /* Set to zero if no pure time + based drain is needed else + set to size of fifo */ }; /* -- cgit v1.2.2 From 335f8514f200e63d689113d29cb7253a5c282967 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:26:29 +0100 Subject: tty: Bring the usb tty port structure into more use This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/belkin_sa.c | 6 +- drivers/usb/serial/ch341.c | 46 ++++++----- drivers/usb/serial/console.c | 6 +- drivers/usb/serial/cp210x.c | 6 +- drivers/usb/serial/cyberjack.c | 6 +- drivers/usb/serial/cypress_m8.c | 81 ++++++------------- drivers/usb/serial/digi_acceleport.c | 75 +++++------------- drivers/usb/serial/empeg.c | 6 +- drivers/usb/serial/ftdi_sio.c | 50 ++++++------ drivers/usb/serial/garmin_gps.c | 3 +- drivers/usb/serial/generic.c | 3 +- drivers/usb/serial/io_edgeport.c | 10 +-- drivers/usb/serial/io_ti.c | 3 +- drivers/usb/serial/ipaq.c | 6 +- drivers/usb/serial/ipw.c | 18 ++--- drivers/usb/serial/ir-usb.c | 6 +- drivers/usb/serial/iuu_phoenix.c | 25 +----- drivers/usb/serial/keyspan.c | 13 ++- drivers/usb/serial/keyspan.h | 8 +- drivers/usb/serial/keyspan_pda.c | 48 ++++++++---- drivers/usb/serial/kl5kusb105.c | 6 +- drivers/usb/serial/kobil_sct.c | 9 +-- drivers/usb/serial/mct_u232.c | 37 ++++----- drivers/usb/serial/mos7720.c | 3 +- drivers/usb/serial/mos7840.c | 48 +----------- drivers/usb/serial/navman.c | 3 +- drivers/usb/serial/omninet.c | 6 +- drivers/usb/serial/opticon.c | 3 +- drivers/usb/serial/option.c | 68 ++++++++-------- drivers/usb/serial/oti6858.c | 57 ++------------ drivers/usb/serial/pl2303.c | 79 ++++++++----------- drivers/usb/serial/sierra.c | 97 ++++++++++------------- drivers/usb/serial/spcp8x5.c | 85 ++++++++------------ drivers/usb/serial/symbolserial.c | 3 +- drivers/usb/serial/ti_usb_3410_5052.c | 6 +- drivers/usb/serial/usb-serial.c | 144 +++++++++++++++++++++++----------- drivers/usb/serial/visor.c | 6 +- drivers/usb/serial/whiteheat.c | 33 +------- include/linux/usb/serial.h | 10 ++- 39 files changed, 467 insertions(+), 661 deletions(-) diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index b7eacad4d48c..2bfd6dd85b5a 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -93,8 +93,7 @@ static int belkin_sa_startup(struct usb_serial *serial); static void belkin_sa_shutdown(struct usb_serial *serial); static int belkin_sa_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void belkin_sa_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void belkin_sa_close(struct usb_serial_port *port); static void belkin_sa_read_int_callback(struct urb *urb); static void belkin_sa_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old); @@ -244,8 +243,7 @@ exit: } /* belkin_sa_open */ -static void belkin_sa_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void belkin_sa_close(struct usb_serial_port *port) { dbg("%s port %d", __func__, port->number); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index ab4cc277aa65..2830766f5b39 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -262,13 +262,33 @@ error: kfree(priv); return r; } -static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static int ch341_carrier_raised(struct usb_serial_port *port) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & CH341_BIT_DCD) + return 1; + return 0; +} + +static void ch341_dtr_rts(struct usb_serial_port *port, int on) { struct ch341_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int c_cflag; + dbg("%s - port %d", __func__, port->number); + /* drop DTR and RTS */ + spin_lock_irqsave(&priv->lock, flags); + if (on) + priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR; + else + priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR); + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_handshake(port->serial->dev, priv->line_control); + wake_up_interruptible(&priv->delta_msr_wait); +} + +static void ch341_close(struct usb_serial_port *port) +{ dbg("%s - port %d", __func__, port->number); /* shutdown our urbs */ @@ -276,18 +296,6 @@ static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port, usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - ch341_set_handshake(port->serial->dev, 0); - } - } - wake_up_interruptible(&priv->delta_msr_wait); } @@ -302,7 +310,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("ch341_open()"); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(serial->dev, priv); if (r) @@ -322,7 +329,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, if (r) { dev_err(&port->dev, "%s - failed submitting interrupt urb," " error %d\n", __func__, r); - ch341_close(tty, port, NULL); + ch341_close(port); return -EPROTO; } @@ -343,9 +350,6 @@ static void ch341_set_termios(struct tty_struct *tty, dbg("ch341_set_termios()"); - if (!tty || !tty->termios) - return; - baud_rate = tty_get_baud_rate(tty); priv->baud_rate = baud_rate; @@ -568,6 +572,8 @@ static struct usb_serial_driver ch341_device = { .usb_driver = &ch341_driver, .num_ports = 1, .open = ch341_open, + .dtr_rts = ch341_dtr_rts, + .carrier_raised = ch341_carrier_raised, .close = ch341_close, .ioctl = ch341_ioctl, .set_termios = ch341_set_termios, diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 19e24045b137..247b61bfb7f4 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -169,7 +169,9 @@ static int usb_console_setup(struct console *co, char *options) kfree(tty); } } - + /* So we know not to kill the hardware on a hangup on this + port. We have also bumped the use count by one so it won't go + idle */ port->console = 1; retval = 0; @@ -182,7 +184,7 @@ free_tty: kfree(tty); reset_open_count: port->port.count = 0; -goto out; + goto out; } static void usb_console_write(struct console *co, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index e8d5133ce9c8..d9f586dc6ecc 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -36,8 +36,7 @@ static int cp2101_open(struct tty_struct *, struct usb_serial_port *, struct file *); static void cp2101_cleanup(struct usb_serial_port *); -static void cp2101_close(struct tty_struct *, struct usb_serial_port *, - struct file*); +static void cp2101_close(struct usb_serial_port *); static void cp2101_get_termios(struct tty_struct *, struct usb_serial_port *port); static void cp2101_get_termios_port(struct usb_serial_port *port, @@ -398,8 +397,7 @@ static void cp2101_cleanup(struct usb_serial_port *port) } } -static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void cp2101_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index dd501bb63ed6..933ba913e66c 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -61,8 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial); static void cyberjack_shutdown(struct usb_serial *serial); static int cyberjack_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void cyberjack_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void cyberjack_close(struct usb_serial_port *port); static int cyberjack_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int cyberjack_write_room(struct tty_struct *tty); @@ -185,8 +184,7 @@ static int cyberjack_open(struct tty_struct *tty, return result; } -static void cyberjack_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void cyberjack_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index e568710b263f..669f93848539 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -174,8 +174,8 @@ static int cypress_ca42v2_startup(struct usb_serial *serial); static void cypress_shutdown(struct usb_serial *serial); static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void cypress_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void cypress_close(struct usb_serial_port *port); +static void cypress_dtr_rts(struct usb_serial_port *port, int on); static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void cypress_send(struct usb_serial_port *port); @@ -218,6 +218,7 @@ static struct usb_serial_driver cypress_earthmate_device = { .shutdown = cypress_shutdown, .open = cypress_open, .close = cypress_close, + .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .ioctl = cypress_ioctl, @@ -244,6 +245,7 @@ static struct usb_serial_driver cypress_hidcom_device = { .shutdown = cypress_shutdown, .open = cypress_open, .close = cypress_close, + .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .ioctl = cypress_ioctl, @@ -270,6 +272,7 @@ static struct usb_serial_driver cypress_ca42v2_device = { .shutdown = cypress_shutdown, .open = cypress_open, .close = cypress_close, + .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .ioctl = cypress_ioctl, @@ -656,11 +659,7 @@ static int cypress_open(struct tty_struct *tty, priv->rx_flags = 0; spin_unlock_irqrestore(&priv->lock, flags); - /* raise both lines and set termios */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = CONTROL_DTR | CONTROL_RTS; - priv->cmd_ctrl = 1; - spin_unlock_irqrestore(&priv->lock, flags); + /* Set termios */ result = cypress_write(tty, port, NULL, 0); if (result) { @@ -694,76 +693,42 @@ static int cypress_open(struct tty_struct *tty, __func__, result); cypress_set_dead(port); } - + port->port.drain_delay = 256; return result; } /* cypress_open */ +static void cypress_dtr_rts(struct usb_serial_port *port, int on) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + /* drop dtr and rts */ + priv = usb_get_serial_port_data(port); + spin_lock_irq(&priv->lock); + if (on == 0) + priv->line_control = 0; + else + priv->line_control = CONTROL_DTR | CONTROL_RTS; + priv->cmd_ctrl = 1; + spin_unlock_irq(&priv->lock); + cypress_write(NULL, port, NULL, 0); +} -static void cypress_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void cypress_close(struct usb_serial_port *port) { struct cypress_private *priv = usb_get_serial_port_data(port); - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; dbg("%s - port %d", __func__, port->number); - /* wait for data to drain from buffer */ - spin_lock_irq(&priv->lock); - timeout = CYPRESS_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (cypress_buf_data_avail(priv->buf) == 0 - || timeout == 0 || signal_pending(current) - /* without mutex, allowed due to harmless failure mode */ - || port->serial->disconnected) - break; - spin_unlock_irq(&priv->lock); - timeout = schedule_timeout(timeout); - spin_lock_irq(&priv->lock); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); - /* clear out any remaining data in the buffer */ - cypress_buf_clear(priv->buf); - spin_unlock_irq(&priv->lock); - /* writing is potentially harmful, lock must be taken */ mutex_lock(&port->serial->disc_mutex); if (port->serial->disconnected) { mutex_unlock(&port->serial->disc_mutex); return; } - /* wait for characters to drain from device */ - if (tty) { - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ * 2560) / bps, HZ / 10); - else - timeout = 2 * HZ; - schedule_timeout_interruptible(timeout); - } - + cypress_buf_clear(priv->buf); dbg("%s - stopping urbs", __func__); usb_kill_urb(port->interrupt_in_urb); usb_kill_urb(port->interrupt_out_urb); - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop dtr and rts */ - priv = usb_get_serial_port_data(port); - spin_lock_irq(&priv->lock); - priv->line_control = 0; - priv->cmd_ctrl = 1; - spin_unlock_irq(&priv->lock); - cypress_write(tty, port, NULL, 0); - } - } if (stats) dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n", diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 38ba4ea8b6bf..30f5140eff03 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -422,7 +422,6 @@ struct digi_port { int dp_throttled; int dp_throttle_restart; wait_queue_head_t dp_flush_wait; - int dp_in_close; /* close in progress */ wait_queue_head_t dp_close_wait; /* wait queue for close */ struct work_struct dp_wakeup_work; struct usb_serial_port *dp_port; @@ -456,8 +455,9 @@ static int digi_write_room(struct tty_struct *tty); static int digi_chars_in_buffer(struct tty_struct *tty); static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void digi_close(struct usb_serial_port *port); +static int digi_carrier_raised(struct usb_serial_port *port); +static void digi_dtr_rts(struct usb_serial_port *port, int on); static int digi_startup_device(struct usb_serial *serial); static int digi_startup(struct usb_serial *serial); static void digi_shutdown(struct usb_serial *serial); @@ -510,6 +510,8 @@ static struct usb_serial_driver digi_acceleport_2_device = { .num_ports = 3, .open = digi_open, .close = digi_close, + .dtr_rts = digi_dtr_rts, + .carrier_raised = digi_carrier_raised, .write = digi_write, .write_room = digi_write_room, .write_bulk_callback = digi_write_bulk_callback, @@ -1328,6 +1330,19 @@ static int digi_chars_in_buffer(struct tty_struct *tty) } +static void digi_dtr_rts(struct usb_serial_port *port, int on) +{ + /* Adjust DTR and RTS */ + digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1); +} + +static int digi_carrier_raised(struct usb_serial_port *port) +{ + struct digi_port *priv = usb_get_serial_port_data(port); + if (priv->dp_modem_signals & TIOCM_CD) + return 1; + return 0; +} static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) @@ -1336,7 +1351,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, unsigned char buf[32]; struct digi_port *priv = usb_get_serial_port_data(port); struct ktermios not_termios; - unsigned long flags = 0; dbg("digi_open: TOP: port=%d, open_count=%d", priv->dp_port_num, port->port.count); @@ -1345,26 +1359,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, if (digi_startup_device(port->serial) != 0) return -ENXIO; - spin_lock_irqsave(&priv->dp_port_lock, flags); - - /* don't wait on a close in progress for non-blocking opens */ - if (priv->dp_in_close && (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) { - spin_unlock_irqrestore(&priv->dp_port_lock, flags); - return -EAGAIN; - } - - /* wait for a close in progress to finish */ - while (priv->dp_in_close) { - cond_wait_interruptible_timeout_irqrestore( - &priv->dp_close_wait, DIGI_RETRY_TIMEOUT, - &priv->dp_port_lock, flags); - if (signal_pending(current)) - return -EINTR; - spin_lock_irqsave(&priv->dp_port_lock, flags); - } - - spin_unlock_irqrestore(&priv->dp_port_lock, flags); - /* read modem signals automatically whenever they change */ buf[0] = DIGI_CMD_READ_INPUT_SIGNALS; buf[1] = priv->dp_port_num; @@ -1387,16 +1381,11 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port, not_termios.c_iflag = ~tty->termios->c_iflag; digi_set_termios(tty, port, ¬_termios); } - - /* set DTR and RTS */ - digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1); - return 0; } -static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void digi_close(struct usb_serial_port *port) { DEFINE_WAIT(wait); int ret; @@ -1411,28 +1400,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, if (port->serial->disconnected) goto exit; - /* do cleanup only after final close on this port */ - spin_lock_irq(&priv->dp_port_lock); - priv->dp_in_close = 1; - spin_unlock_irq(&priv->dp_port_lock); - - /* tell line discipline to process only XON/XOFF */ - tty->closing = 1; - - /* wait for output to drain */ - if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) - tty_wait_until_sent(tty, DIGI_CLOSE_TIMEOUT); - - /* flush driver and line discipline buffers */ - tty_driver_flush_buffer(tty); - tty_ldisc_flush(tty); - if (port->serial->dev) { - /* wait for transmit idle */ - if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) - digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); - /* drop DTR and RTS */ - digi_set_modem_signals(port, 0, 0); + /* FIXME: Transmit idle belongs in the wait_unti_sent path */ + digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); /* disable input flow control */ buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; @@ -1477,11 +1447,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port, /* shutdown any outstanding bulk writes */ usb_kill_urb(port->write_urb); } - tty->closing = 0; exit: spin_lock_irq(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; - priv->dp_in_close = 0; wake_up_interruptible(&priv->dp_close_wait); spin_unlock_irq(&priv->dp_port_lock); mutex_unlock(&port->serial->disc_mutex); @@ -1560,7 +1528,6 @@ static int digi_startup(struct usb_serial *serial) priv->dp_throttled = 0; priv->dp_throttle_restart = 0; init_waitqueue_head(&priv->dp_flush_wait); - priv->dp_in_close = 0; init_waitqueue_head(&priv->dp_close_wait); INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock); priv->dp_port = serial->port[i]; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index c709ec474a80..2b141ccb0cd9 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -81,8 +81,7 @@ static int debug; /* function prototypes for an empeg-car player */ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void empeg_close(struct usb_serial_port *port); static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -181,8 +180,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port, } -static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void empeg_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d9fcdaedf389..d9d87111f9a9 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -719,8 +719,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port); static int ftdi_sio_port_remove(struct usb_serial_port *port); static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void ftdi_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void ftdi_close(struct usb_serial_port *port); +static void ftdi_dtr_rts(struct usb_serial_port *port, int on); static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int ftdi_write_room(struct tty_struct *tty); @@ -758,6 +758,7 @@ static struct usb_serial_driver ftdi_sio_device = { .port_remove = ftdi_sio_port_remove, .open = ftdi_open, .close = ftdi_close, + .dtr_rts = ftdi_dtr_rts, .throttle = ftdi_throttle, .unthrottle = ftdi_unthrottle, .write = ftdi_write, @@ -1558,6 +1559,30 @@ static int ftdi_open(struct tty_struct *tty, } /* ftdi_open */ +static void ftdi_dtr_rts(struct usb_serial_port *port, int on) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + char buf[1]; + + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) { + /* Disable flow control */ + if (!on && usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0, priv->interface, buf, 0, + WDR_TIMEOUT) < 0) { + dev_err(&port->dev, "error from flowcontrol urb\n"); + } + /* drop RTS and DTR */ + if (on) + set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + else + clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + } + mutex_unlock(&port->serial->disc_mutex); +} /* * usbserial:__serial_close only calls ftdi_close if the point is open @@ -1567,31 +1592,12 @@ static int ftdi_open(struct tty_struct *tty, * */ -static void ftdi_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void ftdi_close(struct usb_serial_port *port) { /* ftdi_close */ - unsigned int c_cflag = tty->termios->c_cflag; struct ftdi_private *priv = usb_get_serial_port_data(port); - char buf[1]; dbg("%s", __func__); - mutex_lock(&port->serial->disc_mutex); - if (c_cflag & HUPCL && !port->serial->disconnected) { - /* Disable flow control */ - if (usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, - FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, buf, 0, - WDR_TIMEOUT) < 0) { - dev_err(&port->dev, "error from flowcontrol urb\n"); - } - - /* drop RTS and DTR */ - clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); - } /* Note change no line if hupcl is off */ - mutex_unlock(&port->serial->disc_mutex); /* cancel any scheduled reading */ cancel_delayed_work_sync(&priv->rx_work); diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 586d30ff450b..ee25a3fe3b09 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -993,8 +993,7 @@ static int garmin_open(struct tty_struct *tty, } -static void garmin_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void garmin_close(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 4cec9906ccf3..be82ea956720 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -184,8 +184,7 @@ int usb_serial_generic_resume(struct usb_serial *serial) } EXPORT_SYMBOL_GPL(usb_serial_generic_resume); -void usb_serial_generic_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +void usb_serial_generic_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); generic_cleanup(port); diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index fb4a73d090f6..53ef5996e33d 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -207,8 +207,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb); /* function prototypes for the usbserial callbacks */ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void edge_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void edge_close(struct usb_serial_port *port); static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int edge_write_room(struct tty_struct *tty); @@ -965,7 +964,7 @@ static int edge_open(struct tty_struct *tty, if (!edge_port->txfifo.fifo) { dbg("%s - no memory", __func__); - edge_close(tty, port, filp); + edge_close(port); return -ENOMEM; } @@ -975,7 +974,7 @@ static int edge_open(struct tty_struct *tty, if (!edge_port->write_urb) { dbg("%s - no memory", __func__); - edge_close(tty, port, filp); + edge_close(port); return -ENOMEM; } @@ -1099,8 +1098,7 @@ static void block_until_tx_empty(struct edgeport_port *edge_port) * edge_close * this function is called by the tty driver when a port is closed *****************************************************************************/ -static void edge_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void edge_close(struct usb_serial_port *port) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 513b25e044c1..eabf20eeb370 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2009,8 +2009,7 @@ release_es_lock: return status; } -static void edge_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void edge_close(struct usb_serial_port *port) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index cd62825a9ac3..c610a99fa477 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -76,8 +76,7 @@ static int initial_wait; /* Function prototypes for an ipaq */ static int ipaq_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void ipaq_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void ipaq_close(struct usb_serial_port *port); static int ipaq_calc_num_ports(struct usb_serial *serial); static int ipaq_startup(struct usb_serial *serial); static void ipaq_shutdown(struct usb_serial *serial); @@ -714,8 +713,7 @@ error: } -static void ipaq_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void ipaq_close(struct usb_serial_port *port) { struct ipaq_private *priv = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index da2a2b46644a..29ad038b9c8d 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -302,23 +302,17 @@ static int ipw_open(struct tty_struct *tty, return 0; } -static void ipw_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void ipw_dtr_rts(struct usb_serial_port *port, int on) { struct usb_device *dev = port->serial->dev; int result; - if (tty_hung_up_p(filp)) { - dbg("%s: tty_hung_up_p ...", __func__); - return; - } - /*--1: drop the dtr */ dbg("%s:dropping dtr", __func__); result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_CLRDTR, + on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR, 0, NULL, 0, @@ -332,7 +326,7 @@ static void ipw_close(struct tty_struct *tty, result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, - IPW_PIN_CLRRTS, + on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS, 0, NULL, 0, @@ -340,7 +334,12 @@ static void ipw_close(struct tty_struct *tty, if (result < 0) dev_err(&port->dev, "dropping rts failed (error = %d)\n", result); +} +static void ipw_close(struct usb_serial_port *port) +{ + struct usb_device *dev = port->serial->dev; + int result; /*--3: purge */ dbg("%s:sending purge", __func__); @@ -461,6 +460,7 @@ static struct usb_serial_driver ipw_device = { .num_ports = 1, .open = ipw_open, .close = ipw_close, + .dtr_rts = ipw_dtr_rts, .port_probe = ipw_probe, .port_remove = ipw_disconnect, .write = ipw_write, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 4e2cda93da59..66009b6b763a 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -88,8 +88,7 @@ static int xbof = -1; static int ir_startup (struct usb_serial *serial); static int ir_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filep); -static void ir_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filep); +static void ir_close(struct usb_serial_port *port); static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void ir_write_bulk_callback (struct urb *urb); @@ -346,8 +345,7 @@ static int ir_open(struct tty_struct *tty, return result; } -static void ir_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file * filp) +static void ir_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 4473d442b2aa..bb572cee6ecd 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -70,7 +70,6 @@ static void read_rxcmd_callback(struct urb *urb); struct iuu_private { spinlock_t lock; /* store irq state */ wait_queue_head_t delta_msr_wait; - u8 line_control; u8 line_status; u8 termios_initialized; int tiostatus; /* store IUART SIGNAL for tiocmget call */ @@ -946,19 +945,10 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud, return status; } -static int set_control_lines(struct usb_device *dev, u8 value) -{ - return 0; -} - -static void iuu_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void iuu_close(struct usb_serial_port *port) { /* iuu_led (port,255,0,0,0); */ struct usb_serial *serial; - struct iuu_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - unsigned int c_cflag; serial = port->serial; if (!serial) @@ -968,17 +958,6 @@ static void iuu_close(struct tty_struct *tty, iuu_uart_off(port); if (serial->dev) { - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - priv = usb_get_serial_port_data(port); - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, 0); - } - } /* free writebuf */ /* shutdown our urbs */ dbg("%s - shutting down urbs", __func__); @@ -1154,7 +1133,7 @@ static int iuu_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting read urb," " error %d\n", __func__, result); - iuu_close(tty, port, NULL); + iuu_close(port); return -EPROTO; } else { dbg("%s - rxcmd OK", __func__); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 00daa8f7759a..f1195a98f316 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1298,8 +1298,16 @@ static inline void stop_urb(struct urb *urb) usb_kill_urb(urb); } -static void keyspan_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void keyspan_dtr_rts(struct usb_serial_port *port, int on) +{ + struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); + + p_priv->rts_state = on; + p_priv->dtr_state = on; + keyspan_send_setup(port, 0); +} + +static void keyspan_close(struct usb_serial_port *port) { int i; struct usb_serial *serial = port->serial; @@ -1336,7 +1344,6 @@ static void keyspan_close(struct tty_struct *tty, stop_urb(p_priv->out_urbs[i]); } } - tty_port_tty_set(&port->port, NULL); } /* download the firmware to a pre-renumeration device */ diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 38b4582e0734..0d4569b60768 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -38,9 +38,8 @@ static int keyspan_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void keyspan_close (struct tty_struct *tty, - struct usb_serial_port *port, - struct file *filp); +static void keyspan_close (struct usb_serial_port *port); +static void keyspan_dtr_rts (struct usb_serial_port *port, int on); static int keyspan_startup (struct usb_serial *serial); static void keyspan_shutdown (struct usb_serial *serial); static int keyspan_write_room (struct tty_struct *tty); @@ -562,6 +561,7 @@ static struct usb_serial_driver keyspan_1port_device = { .num_ports = 1, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, .set_termios = keyspan_set_termios, @@ -582,6 +582,7 @@ static struct usb_serial_driver keyspan_2port_device = { .num_ports = 2, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, .set_termios = keyspan_set_termios, @@ -602,6 +603,7 @@ static struct usb_serial_driver keyspan_4port_device = { .num_ports = 4, .open = keyspan_open, .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, .write = keyspan_write, .write_room = keyspan_write_room, .set_termios = keyspan_set_termios, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index bf1ae247da66..ab769dbea1b3 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -651,6 +651,35 @@ static int keyspan_pda_chars_in_buffer(struct tty_struct *tty) } +static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_serial *serial = port->serial; + + if (serial->dev) { + if (on) + keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2)); + else + keyspan_pda_set_modem_info(serial, 0); + } +} + +static int keyspan_pda_carrier_raised(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + unsigned char modembits; + + /* If we can read the modem status and the DCD is low then + carrier is not raised yet */ + if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) { + if (!(modembits & (1>>6))) + return 0; + } + /* Carrier raised, or we failed (eg disconnected) so + progress accordingly */ + return 1; +} + + static int keyspan_pda_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { @@ -682,13 +711,6 @@ static int keyspan_pda_open(struct tty_struct *tty, priv->tx_room = room; priv->tx_throttled = room ? 0 : 1; - /* the normal serial device seems to always turn on DTR and RTS here, - so do the same */ - if (tty && (tty->termios->c_cflag & CBAUD)) - keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2)); - else - keyspan_pda_set_modem_info(serial, 0); - /*Start reading from the device*/ port->interrupt_in_urb->dev = serial->dev; rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); @@ -700,19 +722,11 @@ static int keyspan_pda_open(struct tty_struct *tty, error: return rc; } - - -static void keyspan_pda_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void keyspan_pda_close(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; if (serial->dev) { - /* the normal serial device seems to always shut - off DTR and RTS now */ - if (tty->termios->c_cflag & HUPCL) - keyspan_pda_set_modem_info(serial, 0); - /* shutdown our bulk reads and writes */ usb_kill_urb(port->write_urb); usb_kill_urb(port->interrupt_in_urb); @@ -839,6 +853,8 @@ static struct usb_serial_driver keyspan_pda_device = { .usb_driver = &keyspan_pda_driver, .id_table = id_table_std, .num_ports = 1, + .dtr_rts = keyspan_pda_dtr_rts, + .carrier_raised = keyspan_pda_carrier_raised, .open = keyspan_pda_open, .close = keyspan_pda_close, .write = keyspan_pda_write, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index fcd9082f3e7f..fa817c66b3e8 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -76,8 +76,7 @@ static int klsi_105_startup(struct usb_serial *serial); static void klsi_105_shutdown(struct usb_serial *serial); static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void klsi_105_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void klsi_105_close(struct usb_serial_port *port); static int klsi_105_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void klsi_105_write_bulk_callback(struct urb *urb); @@ -447,8 +446,7 @@ exit: } /* klsi_105_open */ -static void klsi_105_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void klsi_105_close(struct usb_serial_port *port) { struct klsi_105_private *priv = usb_get_serial_port_data(port); int rc; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index c148544953b3..6b570498287f 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -72,8 +72,7 @@ static int kobil_startup(struct usb_serial *serial); static void kobil_shutdown(struct usb_serial *serial); static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void kobil_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void kobil_close(struct usb_serial_port *port); static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int kobil_write_room(struct tty_struct *tty); @@ -209,7 +208,7 @@ static void kobil_shutdown(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { while (serial->port[i]->port.count > 0) - kobil_close(NULL, serial->port[i], NULL); + kobil_close(serial->port[i]); kfree(usb_get_serial_port_data(serial->port[i])); usb_set_serial_port_data(serial->port[i], NULL); } @@ -346,11 +345,11 @@ static int kobil_open(struct tty_struct *tty, } -static void kobil_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void kobil_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); + /* FIXME: Add rts/dtr methods */ if (port->write_urb) { usb_kill_urb(port->write_urb); usb_free_urb(port->write_urb); diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 82930a7d5093..873795548fc0 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -95,8 +95,8 @@ static int mct_u232_startup(struct usb_serial *serial); static void mct_u232_shutdown(struct usb_serial *serial); static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void mct_u232_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void mct_u232_close(struct usb_serial_port *port); +static void mct_u232_dtr_rts(struct usb_serial_port *port, int on); static void mct_u232_read_int_callback(struct urb *urb); static void mct_u232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); @@ -140,6 +140,7 @@ static struct usb_serial_driver mct_u232_device = { .num_ports = 1, .open = mct_u232_open, .close = mct_u232_close, + .dtr_rts = mct_u232_dtr_rts, .throttle = mct_u232_throttle, .unthrottle = mct_u232_unthrottle, .read_int_callback = mct_u232_read_int_callback, @@ -496,29 +497,29 @@ error: return retval; } /* mct_u232_open */ - -static void mct_u232_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) { - unsigned int c_cflag; unsigned int control_state; struct mct_u232_private *priv = usb_get_serial_port_data(port); - dbg("%s port %d", __func__, port->number); - if (tty) { - c_cflag = tty->termios->c_cflag; - mutex_lock(&port->serial->disc_mutex); - if (c_cflag & HUPCL && !port->serial->disconnected) { - /* drop DTR and RTS */ - spin_lock_irq(&priv->lock); + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) { + /* drop DTR and RTS */ + spin_lock_irq(&priv->lock); + if (on) + priv->control_state |= TIOCM_DTR | TIOCM_RTS; + else priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); - control_state = priv->control_state; - spin_unlock_irq(&priv->lock); - mct_u232_set_modem_ctrl(port->serial, control_state); - } - mutex_unlock(&port->serial->disc_mutex); + control_state = priv->control_state; + spin_unlock_irq(&priv->lock); + mct_u232_set_modem_ctrl(port->serial, control_state); } + mutex_unlock(&port->serial->disc_mutex); +} +static void mct_u232_close(struct usb_serial_port *port) +{ + dbg("%s port %d", __func__, port->number); if (port->serial->dev) { /* shutdown our urbs */ diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 24e3b5d4b4d4..9e1a013ee7f6 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -533,8 +533,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty) return chars; } -static void mos7720_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void mos7720_close(struct usb_serial_port *port) { struct usb_serial *serial; struct moschip_port *mos7720_port; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 84fb1dcd30dc..10b78a37214f 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1135,54 +1135,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty) } -/************************************************************************ - * - * mos7840_block_until_tx_empty - * - * This function will block the close until one of the following: - * 1. TX count are 0 - * 2. The mos7840 has stopped - * 3. A timeout of 3 seconds without activity has expired - * - ************************************************************************/ -static void mos7840_block_until_tx_empty(struct tty_struct *tty, - struct moschip_port *mos7840_port) -{ - int timeout = HZ / 10; - int wait = 30; - int count; - - while (1) { - - count = mos7840_chars_in_buffer(tty); - - /* Check for Buffer status */ - if (count <= 0) - return; - - /* Block the thread for a while */ - interruptible_sleep_on_timeout(&mos7840_port->wait_chase, - timeout); - - /* No activity.. count down section */ - wait--; - if (wait == 0) { - dbg("%s - TIMEOUT", __func__); - return; - } else { - /* Reset timeout value back to seconds */ - wait = 30; - } - } -} - /***************************************************************************** * mos7840_close * this function is called by the tty driver when a port is closed *****************************************************************************/ -static void mos7840_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void mos7840_close(struct usb_serial_port *port) { struct usb_serial *serial; struct moschip_port *mos7840_port; @@ -1223,10 +1181,6 @@ static void mos7840_close(struct tty_struct *tty, } } - if (serial->dev) - /* flush and block until tx is empty */ - mos7840_block_until_tx_empty(tty, mos7840_port); - /* While closing port, shutdown all bulk read, write * * and interrupt read if they exists */ if (serial->dev) { diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index bcdcbb822705..f5f3751a888c 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -98,8 +98,7 @@ static int navman_open(struct tty_struct *tty, return result; } -static void navman_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void navman_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index df6539712726..1104617334f5 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -66,8 +66,7 @@ static int debug; /* function prototypes */ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void omninet_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void omninet_close(struct usb_serial_port *port); static void omninet_read_bulk_callback(struct urb *urb); static void omninet_write_bulk_callback(struct urb *urb); static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -189,8 +188,7 @@ static int omninet_open(struct tty_struct *tty, return result; } -static void omninet_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void omninet_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); usb_kill_urb(port->read_urb); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index b500ad10b758..c20480aa9755 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -173,8 +173,7 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port, return result; } -static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void opticon_close(struct usb_serial_port *port) { struct opticon_private *priv = usb_get_serial_data(port->serial); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7817b82889ca..a16d69fadba1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -45,8 +45,9 @@ /* Function prototypes */ static int option_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void option_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void option_close(struct usb_serial_port *port); +static void option_dtr_rts(struct usb_serial_port *port, int on); + static int option_startup(struct usb_serial *serial); static void option_shutdown(struct usb_serial *serial); static int option_write_room(struct tty_struct *tty); @@ -61,7 +62,7 @@ static void option_set_termios(struct tty_struct *tty, static int option_tiocmget(struct tty_struct *tty, struct file *file); static int option_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); -static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *port); +static int option_send_setup(struct usb_serial_port *port); static int option_suspend(struct usb_serial *serial, pm_message_t message); static int option_resume(struct usb_serial *serial); @@ -551,6 +552,7 @@ static struct usb_serial_driver option_1port_device = { .num_ports = 1, .open = option_open, .close = option_close, + .dtr_rts = option_dtr_rts, .write = option_write, .write_room = option_write_room, .chars_in_buffer = option_chars_in_buffer, @@ -630,7 +632,7 @@ static void option_set_termios(struct tty_struct *tty, dbg("%s", __func__); /* Doesn't support option setting */ tty_termios_copy_hw(tty->termios, old_termios); - option_send_setup(tty, port); + option_send_setup(port); } static int option_tiocmget(struct tty_struct *tty, struct file *file) @@ -669,7 +671,7 @@ static int option_tiocmset(struct tty_struct *tty, struct file *file, portdata->rts_state = 0; if (clear & TIOCM_DTR) portdata->dtr_state = 0; - return option_send_setup(tty, port); + return option_send_setup(port); } /* Write */ @@ -897,10 +899,6 @@ static int option_open(struct tty_struct *tty, dbg("%s", __func__); - /* Set some sane defaults */ - portdata->rts_state = 1; - portdata->dtr_state = 1; - /* Reset low level data toggle and start reading from endpoints */ for (i = 0; i < N_IN_URB; i++) { urb = portdata->in_urbs[i]; @@ -936,37 +934,43 @@ static int option_open(struct tty_struct *tty, usb_pipeout(urb->pipe), 0); */ } - option_send_setup(tty, port); + option_send_setup(port); return 0; } -static void option_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void option_dtr_rts(struct usb_serial_port *port, int on) { - int i; struct usb_serial *serial = port->serial; struct option_port_private *portdata; dbg("%s", __func__); portdata = usb_get_serial_port_data(port); + mutex_lock(&serial->disc_mutex); + portdata->rts_state = on; + portdata->dtr_state = on; + if (serial->dev) + option_send_setup(port); + mutex_unlock(&serial->disc_mutex); +} - portdata->rts_state = 0; - portdata->dtr_state = 0; - if (serial->dev) { - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - option_send_setup(tty, port); - mutex_unlock(&serial->disc_mutex); +static void option_close(struct usb_serial_port *port) +{ + int i; + struct usb_serial *serial = port->serial; + struct option_port_private *portdata; + + dbg("%s", __func__); + portdata = usb_get_serial_port_data(port); + if (serial->dev) { /* Stop reading/writing urbs */ for (i = 0; i < N_IN_URB; i++) usb_kill_urb(portdata->in_urbs[i]); for (i = 0; i < N_OUT_URB; i++) usb_kill_urb(portdata->out_urbs[i]); } - tty_port_tty_set(&port->port, NULL); } /* Helper functions used by option_setup_urbs */ @@ -1032,28 +1036,24 @@ static void option_setup_urbs(struct usb_serial *serial) * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN * CDC. */ -static int option_send_setup(struct tty_struct *tty, - struct usb_serial_port *port) +static int option_send_setup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct option_port_private *portdata; int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber; + int val = 0; dbg("%s", __func__); portdata = usb_get_serial_port_data(port); - if (tty) { - int val = 0; - if (portdata->dtr_state) - val |= 0x01; - if (portdata->rts_state) - val |= 0x02; + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT); - } - return 0; + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT); } static int option_startup(struct usb_serial *serial) diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index ba551f00f16f..7de54781fe61 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -143,8 +143,7 @@ struct oti6858_control_pkt { /* function prototypes */ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void oti6858_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void oti6858_close(struct usb_serial_port *port); static void oti6858_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static int oti6858_ioctl(struct tty_struct *tty, struct file *file, @@ -622,67 +621,30 @@ static int oti6858_open(struct tty_struct *tty, if (result != 0) { dev_err(&port->dev, "%s(): usb_submit_urb() failed" " with error %d\n", __func__, result); - oti6858_close(tty, port, NULL); + oti6858_close(port); return -EPROTO; } /* setup termios */ if (tty) oti6858_set_termios(tty, port, &tmp_termios); - + port->port.drain_delay = 256; /* FIXME: check the FIFO length */ return 0; } -static void oti6858_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void oti6858_close(struct usb_serial_port *port) { struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; - long timeout; - wait_queue_t wait; dbg("%s(port = %d)", __func__, port->number); - /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); - timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */ - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - dbg("%s(): entering wait loop", __func__); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (oti6858_buf_data_avail(priv->buf) == 0 - || timeout == 0 || signal_pending(current) - || port->serial->disconnected) - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); - dbg("%s(): after wait loop", __func__); - /* clear out any remaining data in the buffer */ oti6858_buf_clear(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - /* wait for characters to drain from the device */ - /* (this is long enough for the entire 256 byte */ - /* pl2303 hardware buffer to drain with no flow */ - /* control for data rates of 1200 bps or more, */ - /* for lower rates we should really know how much */ - /* data is in the buffer to compute a delay */ - /* that is not unnecessarily long) */ - /* FIXME - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ*2560)/bps,HZ/10); - else - */ - timeout = 2*HZ; - schedule_timeout_interruptible(timeout); - dbg("%s(): after schedule_timeout_interruptible()", __func__); + dbg("%s(): after buf_clear()", __func__); /* cancel scheduled setup */ cancel_delayed_work(&priv->delayed_setup_work); @@ -694,15 +656,6 @@ static void oti6858_close(struct tty_struct *tty, usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - - /* - if (tty && (tty->termios->c_cflag) & HUPCL) { - // drop DTR and RTS - spin_lock_irqsave(&priv->lock, flags); - priv->pending_setup.control &= ~CONTROL_MASK; - spin_unlock_irqrestore(&priv->lock, flags); - } - */ } static int oti6858_tiocmset(struct tty_struct *tty, struct file *file, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 751a533a4347..e02dc3d643c7 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -652,69 +652,41 @@ static void pl2303_set_termios(struct tty_struct *tty, kfree(buf); } -static void pl2303_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void pl2303_dtr_rts(struct usb_serial_port *port, int on) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + /* Change DTR and RTS */ + if (on) + priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + else + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + set_control_lines(port->serial->dev, control); +} + +static void pl2303_close(struct usb_serial_port *port) { struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; dbg("%s - port %d", __func__, port->number); - /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); - timeout = PL2303_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (pl2303_buf_data_avail(priv->buf) == 0 || - timeout == 0 || signal_pending(current) || - port->serial->disconnected) - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); /* clear out any remaining data in the buffer */ pl2303_buf_clear(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - /* wait for characters to drain from the device */ - /* (this is long enough for the entire 256 byte */ - /* pl2303 hardware buffer to drain with no flow */ - /* control for data rates of 1200 bps or more, */ - /* for lower rates we should really know how much */ - /* data is in the buffer to compute a delay */ - /* that is not unnecessarily long) */ - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ*2560)/bps, HZ/10); - else - timeout = 2*HZ; - schedule_timeout_interruptible(timeout); - /* shutdown our urbs */ dbg("%s - shutting down urbs", __func__); usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); usb_kill_urb(port->interrupt_in_urb); - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - /* drop DTR and RTS */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, 0); - } - } } static int pl2303_open(struct tty_struct *tty, @@ -748,7 +720,7 @@ static int pl2303_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting read urb," " error %d\n", __func__, result); - pl2303_close(tty, port, NULL); + pl2303_close(port); return -EPROTO; } @@ -758,9 +730,10 @@ static int pl2303_open(struct tty_struct *tty, if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," " error %d\n", __func__, result); - pl2303_close(tty, port, NULL); + pl2303_close(port); return -EPROTO; } + port->port.drain_delay = 256; return 0; } @@ -821,6 +794,14 @@ static int pl2303_tiocmget(struct tty_struct *tty, struct file *file) return result; } +static int pl2303_carrier_raised(struct usb_serial_port *port) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & UART_DCD) + return 1; + return 0; +} + static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) { struct pl2303_private *priv = usb_get_serial_port_data(port); @@ -1125,6 +1106,8 @@ static struct usb_serial_driver pl2303_device = { .num_ports = 1, .open = pl2303_open, .close = pl2303_close, + .dtr_rts = pl2303_dtr_rts, + .carrier_raised = pl2303_carrier_raised, .write = pl2303_write, .ioctl = pl2303_ioctl, .break_ctl = pl2303_break_ctl, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 913225c61610..1319b8968d82 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -240,57 +240,39 @@ struct sierra_port_private { int ri_state; }; -static int sierra_send_setup(struct tty_struct *tty, - struct usb_serial_port *port) +static int sierra_send_setup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; __u16 interface = 0; + int val = 0; dev_dbg(&port->dev, "%s", __func__); portdata = usb_get_serial_port_data(port); - if (tty) { - int val = 0; - if (portdata->dtr_state) - val |= 0x01; - if (portdata->rts_state) - val |= 0x02; - - /* If composite device then properly report interface */ - if (serial->num_ports == 1) { - interface = sierra_calc_interface(serial); - - /* Control message is sent only to interfaces with - * interrupt_in endpoints - */ - if (port->interrupt_in_urb) { - /* send control message */ - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); - } - } - - /* Otherwise the need to do non-composite mapping */ - else { - if (port->bulk_out_endpointAddress == 2) - interface = 0; - else if (port->bulk_out_endpointAddress == 4) - interface = 1; - else if (port->bulk_out_endpointAddress == 5) - interface = 2; - - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); - - } + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; + + /* If composite device then properly report interface */ + if (serial->num_ports == 1) + interface = sierra_calc_interface(serial); + + /* Otherwise the need to do non-composite mapping */ + else { + if (port->bulk_out_endpointAddress == 2) + interface = 0; + else if (port->bulk_out_endpointAddress == 4) + interface = 1; + else if (port->bulk_out_endpointAddress == 5) + interface = 2; } - + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, + NULL, 0, USB_CTRL_SET_TIMEOUT); return 0; } @@ -299,7 +281,7 @@ static void sierra_set_termios(struct tty_struct *tty, { dev_dbg(&port->dev, "%s", __func__); tty_termios_copy_hw(tty->termios, old_termios); - sierra_send_setup(tty, port); + sierra_send_setup(port); } static int sierra_tiocmget(struct tty_struct *tty, struct file *file) @@ -338,7 +320,7 @@ static int sierra_tiocmset(struct tty_struct *tty, struct file *file, portdata->rts_state = 0; if (clear & TIOCM_DTR) portdata->dtr_state = 0; - return sierra_send_setup(tty, port); + return sierra_send_setup(port); } static void sierra_outdat_callback(struct urb *urb) @@ -598,7 +580,7 @@ static int sierra_open(struct tty_struct *tty, } } - sierra_send_setup(tty, port); + sierra_send_setup(port); /* start up the interrupt endpoint if we have one */ if (port->interrupt_in_urb) { @@ -610,32 +592,38 @@ static int sierra_open(struct tty_struct *tty, return 0; } -static void sierra_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void sierra_dtr_rts(struct usb_serial_port *port, int on) { - int i; struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; - dev_dbg(&port->dev, "%s", __func__); portdata = usb_get_serial_port_data(port); - - portdata->rts_state = 0; - portdata->dtr_state = 0; + portdata->rts_state = on; + portdata->dtr_state = on; if (serial->dev) { mutex_lock(&serial->disc_mutex); if (!serial->disconnected) - sierra_send_setup(tty, port); + sierra_send_setup(port); mutex_unlock(&serial->disc_mutex); + } +} + +static void sierra_close(struct usb_serial_port *port) +{ + int i; + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + dev_dbg(&port->dev, "%s", __func__); + portdata = usb_get_serial_port_data(port); + + if (serial->dev) { /* Stop reading/writing urbs */ for (i = 0; i < N_IN_URB; i++) usb_kill_urb(portdata->in_urbs[i]); } - usb_kill_urb(port->interrupt_in_urb); - tty_port_tty_set(&port->port, NULL); } static int sierra_startup(struct usb_serial *serial) @@ -737,6 +725,7 @@ static struct usb_serial_driver sierra_device = { .probe = sierra_probe, .open = sierra_open, .close = sierra_close, + .dtr_rts = sierra_dtr_rts, .write = sierra_write, .write_room = sierra_write_room, .set_termios = sierra_set_termios, diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 5e7528cc81a8..8f7ed8f13996 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -446,66 +446,47 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value, "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret); } +static int spcp8x5_carrier_raised(struct usb_serial_port *port) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & MSR_STATUS_LINE_DCD) + return 1; + return 0; +} + +static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + if (on) + priv->line_control = MCR_CONTROL_LINE_DTR + | MCR_CONTROL_LINE_RTS; + else + priv->line_control &= ~ (MCR_CONTROL_LINE_DTR + | MCR_CONTROL_LINE_RTS); + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); +} + /* close the serial port. We should wait for data sending to device 1st and * then kill all urb. */ -static void spcp8x5_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void spcp8x5_close(struct usb_serial_port *port) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int c_cflag; - int bps; - long timeout; - wait_queue_t wait; int result; dbg("%s - port %d", __func__, port->number); - /* wait for data to drain from the buffer */ spin_lock_irqsave(&priv->lock, flags); - timeout = SPCP8x5_CLOSING_WAIT; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tty->write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (ringbuf_avail_data(priv->buf) == 0 || - timeout == 0 || signal_pending(current)) - break; - spin_unlock_irqrestore(&priv->lock, flags); - timeout = schedule_timeout(timeout); - spin_lock_irqsave(&priv->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tty->write_wait, &wait); - /* clear out any remaining data in the buffer */ clear_ringbuf(priv->buf); spin_unlock_irqrestore(&priv->lock, flags); - /* wait for characters to drain from the device (this is long enough - * for the entire all byte spcp8x5 hardware buffer to drain with no - * flow control for data rates of 1200 bps or more, for lower rates we - * should really know how much data is in the buffer to compute a delay - * that is not unnecessarily long) */ - bps = tty_get_baud_rate(tty); - if (bps > 1200) - timeout = max((HZ*2560) / bps, HZ/10); - else - timeout = 2*HZ; - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(timeout); - - /* clear control lines */ - if (tty) { - c_cflag = tty->termios->c_cflag; - if (c_cflag & HUPCL) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type); - } - } - /* kill urb */ if (port->write_urb != NULL) { result = usb_unlink_urb(port->write_urb); @@ -665,13 +646,6 @@ static int spcp8x5_open(struct tty_struct *tty, if (ret) return ret; - spin_lock_irqsave(&priv->lock, flags); - if (tty && (tty->termios->c_cflag & CBAUD)) - priv->line_control = MCR_DTR | MCR_RTS; - else - priv->line_control = 0; - spin_unlock_irqrestore(&priv->lock, flags); - spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type); /* Setup termios */ @@ -691,9 +665,10 @@ static int spcp8x5_open(struct tty_struct *tty, port->read_urb->dev = serial->dev; ret = usb_submit_urb(port->read_urb, GFP_KERNEL); if (ret) { - spcp8x5_close(tty, port, NULL); + spcp8x5_close(port); return -EPROTO; } + port->port.drain_delay = 256; return 0; } @@ -1033,6 +1008,8 @@ static struct usb_serial_driver spcp8x5_device = { .num_ports = 1, .open = spcp8x5_open, .close = spcp8x5_close, + .dtr_rts = spcp8x5_dtr_rts, + .carrier_raised = spcp8x5_carrier_raised, .write = spcp8x5_write, .set_termios = spcp8x5_set_termios, .ioctl = spcp8x5_ioctl, diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 69879e437940..8b07ebc6baeb 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -152,8 +152,7 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port, return result; } -static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) +static void symbol_close(struct usb_serial_port *port) { struct symbol_private *priv = usb_get_serial_data(port->serial); diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 0a64bac306ee..42cb04c403be 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -100,8 +100,7 @@ static int ti_startup(struct usb_serial *serial); static void ti_shutdown(struct usb_serial *serial); static int ti_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *file); -static void ti_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *file); +static void ti_close(struct usb_serial_port *port); static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *data, int count); static int ti_write_room(struct tty_struct *tty); @@ -647,8 +646,7 @@ release_lock: } -static void ti_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *file) +static void ti_close(struct usb_serial_port *port) { struct ti_device *tdev; struct ti_port *tport; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index f331e2bde88a..1967a7edc10c 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -238,9 +238,11 @@ static int serial_open (struct tty_struct *tty, struct file *filp) goto bailout_interface_put; mutex_unlock(&serial->disc_mutex); } - mutex_unlock(&port->mutex); - return 0; + /* Now do the correct tty layer semantics */ + retval = tty_port_block_til_ready(&port->port, tty, filp); + if (retval == 0) + return 0; bailout_interface_put: usb_autopm_put_interface(serial->interface); @@ -259,64 +261,89 @@ bailout_serial_put: return retval; } -static void serial_close(struct tty_struct *tty, struct file *filp) +/** + * serial_do_down - shut down hardware + * @port: port to shut down + * + * Shut down a USB port unless it is the console. We never shut down the + * console hardware as it will always be in use. + * + * Don't free any resources at this point + */ +static void serial_do_down(struct usb_serial_port *port) { - struct usb_serial_port *port = tty->driver_data; + struct usb_serial_driver *drv = port->serial->type; struct usb_serial *serial; struct module *owner; - int count; - if (!port) + /* The console is magical, do not hang up the console hardware + or there will be tears */ + if (port->console) return; - dbg("%s - port %d", __func__, port->number); - mutex_lock(&port->mutex); serial = port->serial; owner = serial->type->driver.owner; - if (port->port.count == 0) { - mutex_unlock(&port->mutex); - return; - } - - if (port->port.count == 1) - /* only call the device specific close if this - * port is being closed by the last owner. Ensure we do - * this before we drop the port count. The call is protected - * by the port mutex - */ - serial->type->close(tty, port, filp); - - if (port->port.count == (port->console ? 2 : 1)) { - struct tty_struct *tty = tty_port_tty_get(&port->port); - if (tty) { - /* We must do this before we drop the port count to - zero. */ - if (tty->driver_data) - tty->driver_data = NULL; - tty_port_tty_set(&port->port, NULL); - tty_kref_put(tty); - } - } + if (drv->close) + drv->close(port); - --port->port.count; - count = port->port.count; mutex_unlock(&port->mutex); - put_device(&port->dev); +} + +/** + * serial_do_free - free resources post close/hangup + * @port: port to free up + * + * Do the resource freeing and refcount dropping for the port. We must + * be careful about ordering and we must avoid freeing up the console. + */ +static void serial_do_free(struct usb_serial_port *port) +{ + struct usb_serial *serial; + struct module *owner; + + /* The console is magical, do not hang up the console hardware + or there will be tears */ + if (port->console) + return; + + serial = port->serial; + owner = serial->type->driver.owner; + put_device(&port->dev); /* Mustn't dereference port any more */ - if (count == 0) { - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - usb_autopm_put_interface(serial->interface); - mutex_unlock(&serial->disc_mutex); - } + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + usb_autopm_put_interface(serial->interface); + mutex_unlock(&serial->disc_mutex); usb_serial_put(serial); - /* Mustn't dereference serial any more */ - if (count == 0) - module_put(owner); + module_put(owner); +} + +static void serial_close(struct tty_struct *tty, struct file *filp) +{ + struct usb_serial_port *port = tty->driver_data; + + dbg("%s - port %d", __func__, port->number); + + + if (tty_port_close_start(&port->port, tty, filp) == 0) + return; + + serial_do_down(port); + tty_port_close_end(&port->port, tty); + tty_port_tty_set(&port->port, NULL); + serial_do_free(port); +} + +static void serial_hangup(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + serial_do_down(port); + tty_port_hangup(&port->port); + serial_do_free(port); } static int serial_write(struct tty_struct *tty, const unsigned char *buf, @@ -648,6 +675,29 @@ static struct usb_serial_driver *search_serial_device( return NULL; } +static int serial_carrier_raised(struct tty_port *port) +{ + struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); + struct usb_serial_driver *drv = p->serial->type; + if (drv->carrier_raised) + return drv->carrier_raised(p); + /* No carrier control - don't block */ + return 1; +} + +static void serial_dtr_rts(struct tty_port *port, int on) +{ + struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); + struct usb_serial_driver *drv = p->serial->type; + if (drv->dtr_rts) + drv->dtr_rts(p, on); +} + +static const struct tty_port_operations serial_port_ops = { + .carrier_raised = serial_carrier_raised, + .dtr_rts = serial_dtr_rts, +}; + int usb_serial_probe(struct usb_interface *interface, const struct usb_device_id *id) { @@ -841,6 +891,7 @@ int usb_serial_probe(struct usb_interface *interface, if (!port) goto probe_error; tty_port_init(&port->port); + port->port.ops = &serial_port_ops; port->serial = serial; spin_lock_init(&port->lock); mutex_init(&port->mutex); @@ -1071,6 +1122,9 @@ void usb_serial_disconnect(struct usb_interface *interface) if (port) { struct tty_struct *tty = tty_port_tty_get(&port->port); if (tty) { + /* The hangup will occur asynchronously but + the object refcounts will sort out all the + cleanup */ tty_hangup(tty); tty_kref_put(tty); } @@ -1135,6 +1189,7 @@ static const struct tty_operations serial_ops = { .open = serial_open, .close = serial_close, .write = serial_write, + .hangup = serial_hangup, .write_room = serial_write_room, .ioctl = serial_ioctl, .set_termios = serial_set_termios, @@ -1147,6 +1202,7 @@ static const struct tty_operations serial_ops = { .proc_fops = &serial_proc_fops, }; + struct tty_driver *usb_serial_tty_driver; static int __init usb_serial_init(void) diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 5ac414bda718..b15f1c0e1d4a 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -38,8 +38,7 @@ /* function prototypes for a handspring visor */ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void visor_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp); +static void visor_close(struct usb_serial_port *port); static int visor_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int visor_write_room(struct tty_struct *tty); @@ -324,8 +323,7 @@ exit: } -static void visor_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void visor_close(struct usb_serial_port *port) { struct visor_private *priv = usb_get_serial_port_data(port); unsigned char *transfer_buffer; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 5335d3211c07..7c7295d09f34 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -147,8 +147,7 @@ static int whiteheat_attach(struct usb_serial *serial); static void whiteheat_shutdown(struct usb_serial *serial); static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); -static void whiteheat_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +static void whiteheat_close(struct usb_serial_port *port); static int whiteheat_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -712,8 +711,7 @@ exit: } -static void whiteheat_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void whiteheat_close(struct usb_serial_port *port) { struct whiteheat_private *info = usb_get_serial_port_data(port); struct whiteheat_urb_wrap *wrap; @@ -723,31 +721,7 @@ static void whiteheat_close(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); - mutex_lock(&port->serial->disc_mutex); - /* filp is NULL when called from usb_serial_disconnect */ - if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) { - mutex_unlock(&port->serial->disc_mutex); - return; - } - mutex_unlock(&port->serial->disc_mutex); - - tty->closing = 1; - -/* - * Not currently in use; tty_wait_until_sent() calls - * serial_chars_in_buffer() which deadlocks on the second semaphore - * acquisition. This should be fixed at some point. Greg's been - * notified. - if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) { - tty_wait_until_sent(tty, CLOSING_DELAY); - } -*/ - - tty_driver_flush_buffer(tty); - tty_ldisc_flush(tty); - firm_report_tx_done(port); - firm_close(port); /* shutdown our bulk reads and writes */ @@ -775,10 +749,7 @@ static void whiteheat_close(struct tty_struct *tty, } spin_unlock_irq(&info->lock); mutex_unlock(&info->deathwarrant); - stop_command_port(port->serial); - - tty->closing = 0; } diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 625e9e4639c6..8cdfed738fe4 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -224,8 +224,7 @@ struct usb_serial_driver { /* Called by console with tty = NULL and by tty */ int (*open)(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); - void (*close)(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); + void (*close)(struct usb_serial_port *port); int (*write)(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); /* Called only by the tty layer */ @@ -241,6 +240,10 @@ struct usb_serial_driver { int (*tiocmget)(struct tty_struct *tty, struct file *file); int (*tiocmset)(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); + /* Called by the tty layer for port level work. There may or may not + be an attached tty at this point */ + void (*dtr_rts)(struct usb_serial_port *port, int on); + int (*carrier_raised)(struct usb_serial_port *port); /* USB events */ void (*read_int_callback)(struct urb *urb); void (*write_int_callback)(struct urb *urb); @@ -283,8 +286,7 @@ extern int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); extern int usb_serial_generic_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); -extern void usb_serial_generic_close(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); +extern void usb_serial_generic_close(struct usb_serial_port *port); extern int usb_serial_generic_resume(struct usb_serial *serial); extern int usb_serial_generic_write_room(struct tty_struct *tty); extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); -- cgit v1.2.2 From 739e0285cbb162c8ddd0061fda581ee54a34c19a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:27:50 +0100 Subject: tty: Update cdc_acm The CDC ACM driver uses the tty layer correctly so needs conversion. Start by adding and initializing the port structures. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/class/cdc-acm.c | 5 +++++ drivers/usb/class/cdc-acm.h | 3 ++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 7a1164dd1d37..41d4ca527f82 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -89,6 +89,9 @@ static DEFINE_MUTEX(open_mutex); #define ACM_READY(acm) (acm && acm->dev && acm->used) +static const struct tty_port_operations acm_port_ops = { +}; + #ifdef VERBOSE_DEBUG #define verbose 1 #else @@ -1082,6 +1085,8 @@ skip_normal_probe: spin_lock_init(&acm->read_lock); mutex_init(&acm->mutex); acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress); + tty_port_init(&acm->port); + acm->port.ops = &acm_port_ops; buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) { diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 1f95e7aa1b66..19967cdb2691 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -90,7 +90,8 @@ struct acm { struct usb_interface *control; /* control interface */ struct usb_interface *data; /* data interface */ struct tty_struct *tty; /* the corresponding tty */ - struct urb *ctrlurb; /* urbs */ + struct tty_port port; /* our tty port data */ + struct urb *ctrlurb; /* urbs */ u8 *ctrl_buffer; /* buffers of urbs */ dma_addr_t ctrl_dma; /* dma handles of buffers */ u8 *country_codes; /* country codes from device */ -- cgit v1.2.2 From 5ba5a5d21204f61ff655b322a90ed91c75194e4b Mon Sep 17 00:00:00 2001 From: Paul Fulghum Date: Thu, 11 Jun 2009 12:28:37 +0100 Subject: tty: synclink_gt add receive pio mode Add receive programmed IO mode to reduce receive latency when using low data rates. The receive FIFO trigger level of 128 bytes used in DMA mode creates excessive latency when operating at low data rates. PIO mode is selected when user application requests data in blocks of less than 128 bytes. Signed-off-by: Paul Fulghum Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/synclink_gt.c | 77 ++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 68 insertions(+), 9 deletions(-) diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 67986ea0d479..1386625fc4ca 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -214,6 +214,7 @@ struct slgt_desc #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b)) #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b)) #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0)) +#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b)) #define desc_count(a) (le16_to_cpu((a).count)) #define desc_status(a) (le16_to_cpu((a).status)) #define desc_complete(a) (le16_to_cpu((a).status) & BIT15) @@ -297,6 +298,7 @@ struct slgt_info { u32 max_frame_size; /* as set by device config */ unsigned int rbuf_fill_level; + unsigned int rx_pio; unsigned int if_mode; unsigned int base_clock; @@ -331,6 +333,8 @@ struct slgt_info { struct slgt_desc *rbufs; unsigned int rbuf_current; unsigned int rbuf_index; + unsigned int rbuf_fill_index; + unsigned short rbuf_fill_count; unsigned int tbuf_count; struct slgt_desc *tbufs; @@ -2110,6 +2114,40 @@ static void ri_change(struct slgt_info *info, unsigned short status) info->pending_bh |= BH_STATUS; } +static void isr_rxdata(struct slgt_info *info) +{ + unsigned int count = info->rbuf_fill_count; + unsigned int i = info->rbuf_fill_index; + unsigned short reg; + + while (rd_reg16(info, SSR) & IRQ_RXDATA) { + reg = rd_reg16(info, RDR); + DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg)); + if (desc_complete(info->rbufs[i])) { + /* all buffers full */ + rx_stop(info); + info->rx_restart = 1; + continue; + } + info->rbufs[i].buf[count++] = (unsigned char)reg; + /* async mode saves status byte to buffer for each data byte */ + if (info->params.mode == MGSL_MODE_ASYNC) + info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8); + if (count == info->rbuf_fill_level || (reg & BIT10)) { + /* buffer full or end of frame */ + set_desc_count(info->rbufs[i], count); + set_desc_status(info->rbufs[i], BIT15 | (reg >> 8)); + info->rbuf_fill_count = count = 0; + if (++i == info->rbuf_count) + i = 0; + info->pending_bh |= BH_RECEIVE; + } + } + + info->rbuf_fill_index = i; + info->rbuf_fill_count = count; +} + static void isr_serial(struct slgt_info *info) { unsigned short status = rd_reg16(info, SSR); @@ -2125,6 +2163,8 @@ static void isr_serial(struct slgt_info *info) if (info->tx_count) isr_txeom(info, status); } + if (info->rx_pio && (status & IRQ_RXDATA)) + isr_rxdata(info); if ((status & IRQ_RXBREAK) && (status & RXBREAK)) { info->icount.brk++; /* process break detection if tty control allows */ @@ -2141,7 +2181,8 @@ static void isr_serial(struct slgt_info *info) } else { if (status & (IRQ_TXIDLE + IRQ_TXUNDER)) isr_txeom(info, status); - + if (info->rx_pio && (status & IRQ_RXDATA)) + isr_rxdata(info); if (status & IRQ_RXIDLE) { if (status & RXIDLE) info->icount.rxidle++; @@ -2642,6 +2683,10 @@ static int rx_enable(struct slgt_info *info, int enable) return -EINVAL; } info->rbuf_fill_level = rbuf_fill_level; + if (rbuf_fill_level < 128) + info->rx_pio = 1; /* PIO mode */ + else + info->rx_pio = 0; /* DMA mode */ rx_stop(info); /* restart receiver to use new fill level */ } @@ -3844,15 +3889,27 @@ static void rx_start(struct slgt_info *info) rdma_reset(info); reset_rbufs(info); - /* set 1st descriptor address */ - wr_reg32(info, RDDAR, info->rbufs[0].pdesc); - - if (info->params.mode != MGSL_MODE_ASYNC) { - /* enable rx DMA and DMA interrupt */ - wr_reg32(info, RDCSR, (BIT2 + BIT0)); + if (info->rx_pio) { + /* rx request when rx FIFO not empty */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14)); + slgt_irq_on(info, IRQ_RXDATA); + if (info->params.mode == MGSL_MODE_ASYNC) { + /* enable saving of rx status */ + wr_reg32(info, RDCSR, BIT6); + } } else { - /* enable saving of rx status, rx DMA and DMA interrupt */ - wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); + /* rx request when rx FIFO half full */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14)); + /* set 1st descriptor address */ + wr_reg32(info, RDDAR, info->rbufs[0].pdesc); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* enable rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT2 + BIT0)); + } else { + /* enable saving of rx status, rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); + } } slgt_irq_on(info, IRQ_RXOVER); @@ -4470,6 +4527,8 @@ static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last static void reset_rbufs(struct slgt_info *info) { free_rbufs(info, 0, info->rbuf_count - 1); + info->rbuf_fill_index = 0; + info->rbuf_fill_count = 0; } /* -- cgit v1.2.2 From 97e87f8ebe978e881c7325ba490574bd5500b133 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:29:27 +0100 Subject: tty: cyclades, plx9060 casts cleanup Remove ugly all-over-the-code casts of ctl_addr to 9060 space. Add an union to the cyclades_card structure, which contains a pointer to both 9050 and 9060 spaces. The 9050 space layout is unknown, so let it still as a void __iomem pointer. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 65 ++++++++++++++++++++++++------------------------ include/linux/cyclades.h | 23 +++++++++-------- 2 files changed, 46 insertions(+), 42 deletions(-) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index ccf68a9e24b7..2cbf74134f1b 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -666,12 +666,10 @@ static void cy_send_xchar(struct tty_struct *tty, char ch); #define IS_CYC_Z(card) ((card).num_chips == (unsigned int)-1) #define Z_FPGA_CHECK(card) \ - ((readl(&((struct RUNTIME_9060 __iomem *) \ - ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0) + ((readl(&(card).ctl_addr.p9060->init_ctrl) & (1<<17)) != 0) -#define ISZLOADED(card) (((ZO_V1 == readl(&((struct RUNTIME_9060 __iomem *) \ - ((card).ctl_addr))->mail_box_0)) || \ - Z_FPGA_CHECK(card)) && \ +#define ISZLOADED(card) (((ZO_V1 == readl(&(card).ctl_addr.p9060->mail_box_0)) \ + || Z_FPGA_CHECK(card)) && \ (ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \ ((card).base_addr+ID_ADDRESS))->signature))) @@ -1400,14 +1398,12 @@ cyz_fetch_msg(struct cyclades_card *cinfo, zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; - loc_doorbell = readl(&((struct RUNTIME_9060 __iomem *) - (cinfo->ctl_addr))->loc_doorbell); + loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell); if (loc_doorbell) { *cmd = (char)(0xff & loc_doorbell); *channel = readl(&board_ctrl->fwcmd_channel); *param = (__u32) readl(&board_ctrl->fwcmd_param); - cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> - loc_doorbell, 0xffffffff); + cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff); return 1; } return 0; @@ -1431,8 +1427,7 @@ cyz_issue_cmd(struct cyclades_card *cinfo, board_ctrl = &zfw_ctrl->board_ctrl; index = 0; - pci_doorbell = - &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell; + pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell; while ((readl(pci_doorbell) & 0xff) != 0) { if (index++ == 1000) return (int)(readl(pci_doorbell) & 0xff); @@ -1635,8 +1630,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; fw_ver = readl(&board_ctrl->fw_version); - hw_ver = readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> - mail_box_0); + hw_ver = readl(&cinfo->ctl_addr.p9060->mail_box_0); while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { special_count = 0; @@ -2394,8 +2388,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp) struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; if (!ISZLOADED(*cinfo)) { - if (((ZE_V1 == readl(&((struct RUNTIME_9060 __iomem *) - (cinfo->ctl_addr))->mail_box_0)) && + if (((ZE_V1 == readl(&cinfo->ctl_addr.p9060-> + mail_box_0)) && Z_FPGA_CHECK(*cinfo)) && (ZFIRM_HLT == readl( &firm_id->signature))) { @@ -2417,6 +2411,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp) if (!cinfo->intr_enabled) { struct ZFW_CTRL __iomem *zfw_ctrl; struct BOARD_CTRL __iomem *board_ctrl; + u16 intr; zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & @@ -2425,8 +2420,10 @@ static int cy_open(struct tty_struct *tty, struct file *filp) board_ctrl = &zfw_ctrl->board_ctrl; /* Enable interrupts on the PLX chip */ - cy_writew(cinfo->ctl_addr + 0x68, - readw(cinfo->ctl_addr + 0x68) | 0x0900); + intr = readw(&cinfo->ctl_addr.p9060-> + intr_ctrl_stat) | 0x0900; + cy_writew(&cinfo->ctl_addr.p9060-> + intr_ctrl_stat, intr); /* Enable interrupts on the FW */ retval = cyz_issue_cmd(cinfo, 0, C_CM_IRQ_ENBL, 0L); @@ -4347,8 +4344,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) spin_lock_init(&cinfo->card_lock); if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */ - mailbox = readl(&((struct RUNTIME_9060 __iomem *) - cinfo->ctl_addr)->mail_box_0); + mailbox = readl(&cinfo->ctl_addr.p9060->mail_box_0); nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; cinfo->intr_enabled = 0; cinfo->nports = 0; /* Will be correctly set later, after @@ -4613,7 +4609,7 @@ static int __init cy_detect_isa(void) /* set cy_card */ cy_card[j].base_addr = cy_isa_address; - cy_card[j].ctl_addr = NULL; + cy_card[j].ctl_addr.p9050 = NULL; cy_card[j].irq = (int)cy_isa_irq; cy_card[j].bus_index = 0; cy_card[j].first_line = cy_next_channel; @@ -5013,7 +5009,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } /* Disable interrupts on the PLX before resetting it */ - cy_writew(addr0 + 0x68, readw(addr0 + 0x68) & ~0x0900); + cy_writew(&ctl_addr->intr_ctrl_stat, + readw(&ctl_addr->intr_ctrl_stat) & ~0x0900); plx_init(pdev, irq, addr0); @@ -5109,7 +5106,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, /* set cy_card */ cy_card[card_no].base_addr = addr2; - cy_card[card_no].ctl_addr = addr0; + cy_card[card_no].ctl_addr.p9050 = addr0; cy_card[card_no].irq = irq; cy_card[card_no].bus_index = 1; cy_card[card_no].first_line = cy_next_channel; @@ -5125,17 +5122,20 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, plx_ver = readb(addr2 + CyPLX_VER) & 0x0f; switch (plx_ver) { case PLX_9050: - cy_writeb(addr0 + 0x4c, 0x43); break; case PLX_9060: case PLX_9080: default: /* Old boards, use PLX_9060 */ - plx_init(pdev, irq, addr0); - cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900); + { + struct RUNTIME_9060 __iomem *ctl_addr = addr0; + plx_init(pdev, irq, ctl_addr); + cy_writew(&ctl_addr->intr_ctrl_stat, + readw(&ctl_addr->intr_ctrl_stat) | 0x0900); break; } + } } dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " @@ -5168,17 +5168,18 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev) /* non-Z with old PLX */ if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == PLX_9050) - cy_writeb(cinfo->ctl_addr + 0x4c, 0); + cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0); else #ifndef CONFIG_CYZ_INTR if (!IS_CYC_Z(*cinfo)) #endif - cy_writew(cinfo->ctl_addr + 0x68, - readw(cinfo->ctl_addr + 0x68) & ~0x0900); + cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat, + readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) & + ~0x0900); iounmap(cinfo->base_addr); - if (cinfo->ctl_addr) - iounmap(cinfo->ctl_addr); + if (cinfo->ctl_addr.p9050) + iounmap(cinfo->ctl_addr.p9050); if (cinfo->irq #ifndef CONFIG_CYZ_INTR && !IS_CYC_Z(*cinfo) @@ -5373,8 +5374,8 @@ static void __exit cy_cleanup_module(void) /* clear interrupt */ cy_writeb(card->base_addr + Cy_ClrIntr, 0); iounmap(card->base_addr); - if (card->ctl_addr) - iounmap(card->ctl_addr); + if (card->ctl_addr.p9050) + iounmap(card->ctl_addr.p9050); if (card->irq #ifndef CONFIG_CYZ_INTR && !IS_CYC_Z(*card) diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index 788850ba4e75..9ae03d5b3590 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -507,16 +507,19 @@ struct ZFW_CTRL { /* Per card data structure */ struct cyclades_card { - void __iomem *base_addr; - void __iomem *ctl_addr; - int irq; - unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */ - unsigned int first_line; /* minor number of first channel on card */ - unsigned int nports; /* Number of ports in the card */ - int bus_index; /* address shift - 0 for ISA, 1 for PCI */ - int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */ - spinlock_t card_lock; - struct cyclades_port *ports; + void __iomem *base_addr; + union { + void __iomem *p9050; + struct RUNTIME_9060 __iomem *p9060; + } ctl_addr; + int irq; + unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */ + unsigned int first_line; /* minor number of first channel on card */ + unsigned int nports; /* Number of ports in the card */ + int bus_index; /* address shift - 0 for ISA, 1 for PCI */ + int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */ + spinlock_t card_lock; + struct cyclades_port *ports; }; /*************************************** -- cgit v1.2.2 From 101b81590d8df0a74c33cf739886247c0a13f4af Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:30:10 +0100 Subject: tty: cyclades, cache HW version Store HW version locally to not read it all the time in interrupts and alike. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 32 +++++++++++--------------------- include/linux/cyclades.h | 1 + 2 files changed, 12 insertions(+), 21 deletions(-) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 2cbf74134f1b..cf191cc1c921 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -668,8 +668,7 @@ static void cy_send_xchar(struct tty_struct *tty, char ch); #define Z_FPGA_CHECK(card) \ ((readl(&(card).ctl_addr.p9060->init_ctrl) & (1<<17)) != 0) -#define ISZLOADED(card) (((ZO_V1 == readl(&(card).ctl_addr.p9060->mail_box_0)) \ - || Z_FPGA_CHECK(card)) && \ +#define ISZLOADED(card) ((ZO_V1 == (card).hw_ver || Z_FPGA_CHECK(card)) && \ (ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \ ((card).base_addr+ID_ADDRESS))->signature))) @@ -1393,8 +1392,6 @@ cyz_fetch_msg(struct cyclades_card *cinfo, unsigned long loc_doorbell; firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) - return -1; zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; @@ -1619,10 +1616,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) static struct BOARD_CTRL __iomem *board_ctrl; static struct CH_CTRL __iomem *ch_ctrl; static struct BUF_CTRL __iomem *buf_ctrl; - __u32 channel; + __u32 channel, param, fw_ver; __u8 cmd; - __u32 param; - __u32 hw_ver, fw_ver; int special_count; int delta_count; @@ -1630,7 +1625,6 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; fw_ver = readl(&board_ctrl->fw_version); - hw_ver = readl(&cinfo->ctl_addr.p9060->mail_box_0); while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { special_count = 0; @@ -2388,11 +2382,9 @@ static int cy_open(struct tty_struct *tty, struct file *filp) struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; if (!ISZLOADED(*cinfo)) { - if (((ZE_V1 == readl(&cinfo->ctl_addr.p9060-> - mail_box_0)) && - Z_FPGA_CHECK(*cinfo)) && - (ZFIRM_HLT == readl( - &firm_id->signature))) { + if (cinfo->hw_ver == ZE_V1 && Z_FPGA_CHECK(*cinfo) && + readl(&firm_id->signature) == + ZFIRM_HLT) { printk(KERN_ERR "cyc:Cyclades-Z Error: you " "need an external power supply for " "this number of ports.\nFirmware " @@ -4336,7 +4328,6 @@ static void cy_hangup(struct tty_struct *tty) static int __devinit cy_init_card(struct cyclades_card *cinfo) { struct cyclades_port *info; - u32 uninitialized_var(mailbox); unsigned int nports, port; unsigned short chip_number; int uninitialized_var(index); @@ -4344,8 +4335,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) spin_lock_init(&cinfo->card_lock); if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */ - mailbox = readl(&cinfo->ctl_addr.p9060->mail_box_0); - nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; + nports = (cinfo->hw_ver == ZE_V1) ? ZE_V1_NPORTS : 8; cinfo->intr_enabled = 0; cinfo->nports = 0; /* Will be correctly set later, after Z FW is loaded */ @@ -4377,7 +4367,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) if (IS_CYC_Z(*cinfo)) { info->type = PORT_STARTECH; - if (mailbox == ZO_V1) + if (cinfo->hw_ver == ZO_V1) info->xmit_fifo_size = CYZ_FIFO_SIZE; else info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE; @@ -4932,7 +4922,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, { void __iomem *addr0 = NULL, *addr2 = NULL; char *card_name = NULL; - u32 mailbox; + u32 uninitialized_var(mailbox); unsigned int device_id, nchan = 0, card_no, i; unsigned char plx_ver; int retval, irq; @@ -5014,7 +5004,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, plx_init(pdev, irq, addr0); - mailbox = (u32)readl(&ctl_addr->mail_box_0); + mailbox = readl(&ctl_addr->mail_box_0); addr2 = ioremap_nocache(pci_resource_start(pdev, 2), mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin); @@ -5026,7 +5016,6 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, if (mailbox == ZE_V1) { card_name = "Cyclades-Ze"; - readl(&ctl_addr->mail_box_0); nchan = ZE_V1_NPORTS; } else { card_name = "Cyclades-8Zo"; @@ -5089,6 +5078,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } cy_card[card_no].num_chips = nchan / 4; } else { + cy_card[card_no].hw_ver = mailbox; + cy_card[card_no].num_chips = (unsigned int)-1; #ifdef CONFIG_CYZ_INTR /* allocate IRQ only if board has an IRQ */ if (irq != 0 && irq != 255) { @@ -5101,7 +5092,6 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } } #endif /* CONFIG_CYZ_INTR */ - cy_card[card_no].num_chips = (unsigned int)-1; } /* set cy_card */ diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index 9ae03d5b3590..a14fe3079761 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -518,6 +518,7 @@ struct cyclades_card { unsigned int nports; /* Number of ports in the card */ int bus_index; /* address shift - 0 for ISA, 1 for PCI */ int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */ + u32 hw_ver; spinlock_t card_lock; struct cyclades_port *ports; }; -- cgit v1.2.2 From 2693f485c22d18474c077f12fd0f797ee8679b33 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:31:06 +0100 Subject: tty: cyclades, convert macros to inlines Remove ugly macros and add inlines instead of them. This improves readability and type checking a much. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 130 ++++++++++++++++++++++++++---------------------- 1 file changed, 71 insertions(+), 59 deletions(-) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index cf191cc1c921..c9a503f4724a 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -663,15 +663,6 @@ static void cy_throttle(struct tty_struct *tty); static void cy_send_xchar(struct tty_struct *tty, char ch); -#define IS_CYC_Z(card) ((card).num_chips == (unsigned int)-1) - -#define Z_FPGA_CHECK(card) \ - ((readl(&(card).ctl_addr.p9060->init_ctrl) & (1<<17)) != 0) - -#define ISZLOADED(card) ((ZO_V1 == (card).hw_ver || Z_FPGA_CHECK(card)) && \ - (ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \ - ((card).base_addr+ID_ADDRESS))->signature))) - #ifndef SERIAL_XMIT_SIZE #define SERIAL_XMIT_SIZE (min(PAGE_SIZE, 4096)) #endif @@ -684,8 +675,6 @@ static void cy_send_xchar(struct tty_struct *tty, char ch); #define DRIVER_VERSION 0x02010203 #define RAM_SIZE 0x80000 -#define Z_FPGA_LOADED(X) ((readl(&(X)->init_ctrl) & (1<<17)) != 0) - enum zblock_type { ZBLOCK_PRG = 0, ZBLOCK_FPGA = 1 @@ -880,6 +869,29 @@ static void cyz_rx_restart(unsigned long); static struct timer_list cyz_rx_full_timer[NR_PORTS]; #endif /* CONFIG_CYZ_INTR */ +static inline bool cy_is_Z(struct cyclades_card *card) +{ + return card->num_chips == (unsigned int)-1; +} + +static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr) +{ + return readl(&ctl_addr->init_ctrl) & (1 << 17); +} + +static inline bool cyz_fpga_loaded(struct cyclades_card *card) +{ + return __cyz_fpga_loaded(card->ctl_addr.p9060); +} + +static inline bool cyz_is_loaded(struct cyclades_card *card) +{ + struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS; + + return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) && + readl(&fw_id->signature) == ZFIRM_ID; +} + static inline int serial_paranoia_check(struct cyclades_port *info, char *name, const char *routine) { @@ -1417,7 +1429,7 @@ cyz_issue_cmd(struct cyclades_card *cinfo, unsigned int index; firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) + if (!cyz_is_loaded(cinfo)) return -1; zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); @@ -1725,7 +1737,7 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id) { struct cyclades_card *cinfo = dev_id; - if (unlikely(!ISZLOADED(*cinfo))) { + if (unlikely(!cyz_is_loaded(cinfo))) { #ifdef CY_DEBUG_INTERRUPTS printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " "(IRQ%d).\n", irq); @@ -1773,9 +1785,9 @@ static void cyz_poll(unsigned long arg) for (card = 0; card < NR_CARDS; card++) { cinfo = &cy_card[card]; - if (!IS_CYC_Z(*cinfo)) + if (!cy_is_Z(cinfo)) continue; - if (!ISZLOADED(*cinfo)) + if (!cyz_is_loaded(cinfo)) continue; firm_id = cinfo->base_addr + ID_ADDRESS; @@ -1854,7 +1866,7 @@ static int startup(struct cyclades_port *info) set_line_char(info); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -1911,7 +1923,7 @@ static int startup(struct cyclades_port *info) base_addr = card->base_addr; firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) + if (!cyz_is_loaded(card)) return -ENODEV; zfw_ctrl = card->base_addr + @@ -2006,7 +2018,7 @@ static void start_xmit(struct cyclades_port *info) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -2050,7 +2062,7 @@ static void shutdown(struct cyclades_port *info) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -2106,7 +2118,7 @@ static void shutdown(struct cyclades_port *info) #endif firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) + if (!cyz_is_loaded(card)) return; zfw_ctrl = card->base_addr + @@ -2213,7 +2225,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, #endif info->port.blocked_open++; - if (!IS_CYC_Z(*cinfo)) { + if (!cy_is_Z(cinfo)) { chip = channel >> 2; channel &= 0x03; index = cinfo->bus_index; @@ -2276,7 +2288,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, base_addr = cinfo->base_addr; firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) { + if (!cyz_is_loaded(cinfo)) { __set_current_state(TASK_RUNNING); remove_wait_queue(&info->port.open_wait, &wait); return -EINVAL; @@ -2377,12 +2389,12 @@ static int cy_open(struct tty_struct *tty, struct file *filp) treat it as absent from the system. This will make the user pay attention. */ - if (IS_CYC_Z(*info->card)) { + if (cy_is_Z(info->card)) { struct cyclades_card *cinfo = info->card; struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; - if (!ISZLOADED(*cinfo)) { - if (cinfo->hw_ver == ZE_V1 && Z_FPGA_CHECK(*cinfo) && + if (!cyz_is_loaded(cinfo)) { + if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) && readl(&firm_id->signature) == ZFIRM_HLT) { printk(KERN_ERR "cyc:Cyclades-Z Error: you " @@ -2537,7 +2549,7 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout) #endif card = info->card; channel = (info->line) - (card->first_line); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -2582,7 +2594,7 @@ static void cy_flush_buffer(struct tty_struct *tty) info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; spin_unlock_irqrestore(&card->card_lock, flags); - if (IS_CYC_Z(*card)) { /* If it is a Z card, flush the on-board + if (cy_is_Z(card)) { /* If it is a Z card, flush the on-board buffers as well */ spin_lock_irqsave(&card->card_lock, flags); retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L); @@ -2663,7 +2675,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp) spin_lock_irqsave(&card->card_lock, flags); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { int channel = info->line - card->first_line; int index = card->bus_index; void __iomem *base_addr = card->base_addr + @@ -2883,7 +2895,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty) channel = (info->line) - (card->first_line); #ifdef Z_EXT_CHARS_IN_BUFFER - if (!IS_CYC_Z(cy_card[card])) { + if (!cy_is_Z(card)) { #endif /* Z_EXT_CHARS_IN_BUFFER */ #ifdef CY_DEBUG_IO printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", @@ -2996,7 +3008,7 @@ static void set_line_char(struct cyclades_port *info) channel = info->line - card->first_line; chip_number = channel / 4; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { index = card->bus_index; @@ -3221,7 +3233,7 @@ static void set_line_char(struct cyclades_port *info) int retval; firm_id = card->base_addr + ID_ADDRESS; - if (!ISZLOADED(*card)) + if (!cyz_is_loaded(card)) return; zfw_ctrl = card->base_addr + @@ -3438,7 +3450,7 @@ static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value) card = info->card; channel = (info->line) - (card->first_line); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3478,7 +3490,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3504,7 +3516,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) } else { base_addr = card->base_addr; firm_id = card->base_addr + ID_ADDRESS; - if (ISZLOADED(*card)) { + if (cyz_is_loaded(card)) { zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; @@ -3547,7 +3559,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, card = info->card; channel = (info->line) - (card->first_line); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3622,7 +3634,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, base_addr = card->base_addr; firm_id = card->base_addr + ID_ADDRESS; - if (ISZLOADED(*card)) { + if (cyz_is_loaded(card)) { zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; @@ -3694,7 +3706,7 @@ static int cy_break(struct tty_struct *tty, int break_state) card = info->card; spin_lock_irqsave(&card->card_lock, flags); - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { /* Let the transmit ISR take care of this (since it requires stuffing characters into the output stream). */ @@ -3763,7 +3775,7 @@ static int set_threshold(struct cyclades_port *info, unsigned long value) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3791,7 +3803,7 @@ static int get_threshold(struct cyclades_port *info, card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3825,7 +3837,7 @@ static int set_timeout(struct cyclades_port *info, unsigned long value) card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -3848,7 +3860,7 @@ static int get_timeout(struct cyclades_port *info, card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -4102,7 +4114,7 @@ static void cy_send_xchar(struct tty_struct *tty, char ch) card = info->card; channel = info->line - card->first_line; - if (IS_CYC_Z(*card)) { + if (cy_is_Z(card)) { if (ch == STOP_CHAR(tty)) cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L); else if (ch == START_CHAR(tty)) @@ -4135,7 +4147,7 @@ static void cy_throttle(struct tty_struct *tty) card = info->card; if (I_IXOFF(tty)) { - if (!IS_CYC_Z(*card)) + if (!cy_is_Z(card)) cy_send_xchar(tty, STOP_CHAR(tty)); else info->throttle = 1; @@ -4143,7 +4155,7 @@ static void cy_throttle(struct tty_struct *tty) if (tty->termios->c_cflag & CRTSCTS) { channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -4200,7 +4212,7 @@ static void cy_unthrottle(struct tty_struct *tty) if (tty->termios->c_cflag & CRTSCTS) { card = info->card; channel = info->line - card->first_line; - if (!IS_CYC_Z(*card)) { + if (!cy_is_Z(card)) { chip = channel >> 2; channel &= 0x03; index = card->bus_index; @@ -4244,7 +4256,7 @@ static void cy_stop(struct tty_struct *tty) cinfo = info->card; channel = info->line - cinfo->first_line; - if (!IS_CYC_Z(*cinfo)) { + if (!cy_is_Z(cinfo)) { index = cinfo->bus_index; chip = channel >> 2; channel &= 0x03; @@ -4277,7 +4289,7 @@ static void cy_start(struct tty_struct *tty) cinfo = info->card; channel = info->line - cinfo->first_line; index = cinfo->bus_index; - if (!IS_CYC_Z(*cinfo)) { + if (!cy_is_Z(cinfo)) { chip = channel >> 2; channel &= 0x03; base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); @@ -4334,7 +4346,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) spin_lock_init(&cinfo->card_lock); - if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */ + if (cy_is_Z(cinfo)) { /* Cyclades-Z */ nports = (cinfo->hw_ver == ZE_V1) ? ZE_V1_NPORTS : 8; cinfo->intr_enabled = 0; cinfo->nports = 0; /* Will be correctly set later, after @@ -4365,7 +4377,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) init_completion(&info->shutdown_wait); init_waitqueue_head(&info->delta_msr_wait); - if (IS_CYC_Z(*cinfo)) { + if (cy_is_Z(cinfo)) { info->type = PORT_STARTECH; if (cinfo->hw_ver == ZO_V1) info->xmit_fifo_size = CYZ_FIFO_SIZE; @@ -4408,7 +4420,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) } #ifndef CONFIG_CYZ_INTR - if (IS_CYC_Z(*cinfo) && !timer_pending(&cyz_timerlist)) { + if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) { mod_timer(&cyz_timerlist, jiffies + 1); #ifdef CY_PCI_DEBUG printk(KERN_DEBUG "Cyclades-Z polling initialized\n"); @@ -4771,7 +4783,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, /* Check whether the firmware is already loaded and running. If positive, skip this board */ - if (Z_FPGA_LOADED(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) { + if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) { u32 cntval = readl(base_addr + 0x190); udelay(100); @@ -4790,7 +4802,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, mailbox = readl(&ctl_addr->mail_box_0); - if (mailbox == 0 || Z_FPGA_LOADED(ctl_addr)) { + if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) { /* stops CPU and set window to beginning of RAM */ cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); cy_writel(&cust->cpu_stop, 0); @@ -4806,7 +4818,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, base_addr); if (retval) goto err_rel; - if (!Z_FPGA_LOADED(ctl_addr)) { + if (!__cyz_fpga_loaded(ctl_addr)) { dev_err(&pdev->dev, "fw upload successful, but fw is " "not loaded\n"); goto err_rel; @@ -4865,7 +4877,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, "system before loading the new FW to the " "Cyclades-Z.\n"); - if (Z_FPGA_LOADED(ctl_addr)) + if (__cyz_fpga_loaded(ctl_addr)) plx_init(pdev, irq, ctl_addr); retval = -EIO; @@ -4889,7 +4901,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, "check the connection between the Z host card and the " "serial expanders.\n"); - if (Z_FPGA_LOADED(ctl_addr)) + if (__cyz_fpga_loaded(ctl_addr)) plx_init(pdev, irq, ctl_addr); dev_info(&pdev->dev, "Null number of ports detected. Board " @@ -5156,12 +5168,12 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev) unsigned int i; /* non-Z with old PLX */ - if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == + if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == PLX_9050) cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0); else #ifndef CONFIG_CYZ_INTR - if (!IS_CYC_Z(*cinfo)) + if (!cy_is_Z(cinfo)) #endif cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat, readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) & @@ -5172,7 +5184,7 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev) iounmap(cinfo->ctl_addr.p9050); if (cinfo->irq #ifndef CONFIG_CYZ_INTR - && !IS_CYC_Z(*cinfo) + && !cy_is_Z(cinfo) #endif /* CONFIG_CYZ_INTR */ ) free_irq(cinfo->irq, cinfo); @@ -5368,7 +5380,7 @@ static void __exit cy_cleanup_module(void) iounmap(card->ctl_addr.p9050); if (card->irq #ifndef CONFIG_CYZ_INTR - && !IS_CYC_Z(*card) + && !cy_is_Z(card) #endif /* CONFIG_CYZ_INTR */ ) free_irq(card->irq, card); -- cgit v1.2.2 From 08a951e1693e324bd035b194002a82b9057fd9c5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:33:40 +0100 Subject: tty: cyclades, remove typedefs They are unused anyway. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/cyclades.h | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index a14fe3079761..1fbdea4f08eb 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -142,19 +142,6 @@ struct CYZ_BOOT_CTRL { #ifndef DP_WINDOW_SIZE -/* #include "cyclomz.h" */ -/****************** ****************** *******************/ -/* - * The data types defined below are used in all ZFIRM interface - * data structures. They accomodate differences between HW - * architectures and compilers. - */ - -typedef __u64 ucdouble; /* 64 bits, unsigned */ -typedef __u32 uclong; /* 32 bits, unsigned */ -typedef __u16 ucshort; /* 16 bits, unsigned */ -typedef __u8 ucchar; /* 8 bits, unsigned */ - /* * Memory Window Sizes */ -- cgit v1.2.2 From 963118eef9e6706e2b5356309fb0cdd9c9eba81d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:34:27 +0100 Subject: tty: cyclades, fix nports handling Set up ports right after FW load so that we won't allocate maximal (64) ports when we use few. Also remove reading of nports in irq context, since we know it from initialisation now. This also fixes a tty ports unregistration on some fail paths and for Ze which registered 64 and unregistered real port count. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 58 +++++++++++++++---------------------------------- 1 file changed, 17 insertions(+), 41 deletions(-) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index c9a503f4724a..6adbc9759661 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -604,7 +604,6 @@ #define NR_PORTS 256 -#define ZE_V1_NPORTS 64 #define ZO_V1 0 #define ZO_V2 1 #define ZE_V1 2 @@ -1777,7 +1776,6 @@ static void cyz_poll(unsigned long arg) struct tty_struct *tty; struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; struct BUF_CTRL __iomem *buf_ctrl; unsigned long expires = jiffies + HZ; unsigned int port, card; @@ -1793,11 +1791,9 @@ static void cyz_poll(unsigned long arg) firm_id = cinfo->base_addr + ID_ADDRESS; zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &(zfw_ctrl->board_ctrl); /* Skip first polling cycle to avoid racing conditions with the FW */ if (!cinfo->intr_enabled) { - cinfo->nports = (int)readl(&board_ctrl->n_channel); cinfo->intr_enabled = 1; continue; } @@ -2413,16 +2409,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp) interrupts should be enabled as soon as the first open happens to one of its ports. */ if (!cinfo->intr_enabled) { - struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; u16 intr; - zfw_ctrl = cinfo->base_addr + - (readl(&firm_id->zfwctrl_addr) & - 0xfffff); - - board_ctrl = &zfw_ctrl->board_ctrl; - /* Enable interrupts on the PLX chip */ intr = readw(&cinfo->ctl_addr.p9060-> intr_ctrl_stat) | 0x0900; @@ -2435,8 +2423,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp) printk(KERN_ERR "cyc:IRQ enable retval " "was %x\n", retval); } - cinfo->nports = - (int)readl(&board_ctrl->n_channel); cinfo->intr_enabled = 1; } } @@ -4340,30 +4326,20 @@ static void cy_hangup(struct tty_struct *tty) static int __devinit cy_init_card(struct cyclades_card *cinfo) { struct cyclades_port *info; - unsigned int nports, port; + unsigned int port; unsigned short chip_number; - int uninitialized_var(index); spin_lock_init(&cinfo->card_lock); + cinfo->intr_enabled = 0; - if (cy_is_Z(cinfo)) { /* Cyclades-Z */ - nports = (cinfo->hw_ver == ZE_V1) ? ZE_V1_NPORTS : 8; - cinfo->intr_enabled = 0; - cinfo->nports = 0; /* Will be correctly set later, after - Z FW is loaded */ - } else { - index = cinfo->bus_index; - nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips; - } - - cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL); + cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports), + GFP_KERNEL); if (cinfo->ports == NULL) { printk(KERN_ERR "Cyclades: cannot allocate ports\n"); - cinfo->nports = 0; return -ENOMEM; } - for (port = cinfo->first_line; port < cinfo->first_line + nports; + for (port = cinfo->first_line; port < cinfo->first_line + cinfo->nports; port++) { info = &cinfo->ports[port - cinfo->first_line]; tty_port_init(&info->port); @@ -4388,6 +4364,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo) cyz_rx_restart, (unsigned long)info); #endif } else { + int index = cinfo->bus_index; info->type = PORT_CIRRUS; info->xmit_fifo_size = CyMAX_CHAR_FIFO; info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; @@ -4615,7 +4592,8 @@ static int __init cy_detect_isa(void) cy_card[j].irq = (int)cy_isa_irq; cy_card[j].bus_index = 0; cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = cy_isa_nchan / 4; + cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP; + cy_card[j].nports = cy_isa_nchan; if (cy_init_card(&cy_card[j])) { cy_card[j].base_addr = NULL; free_irq(cy_isa_irq, &cy_card[j]); @@ -4771,7 +4749,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, struct CUSTOM_REG __iomem *cust = base_addr; struct ZFW_CTRL __iomem *pt_zfwctrl; void __iomem *tmp; - u32 mailbox, status; + u32 mailbox, status, nchan; unsigned int i; int retval; @@ -4892,11 +4870,11 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr), base_addr + readl(&fid->zfwctrl_addr)); + nchan = readl(&pt_zfwctrl->board_ctrl.n_channel); dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n", - readl(&pt_zfwctrl->board_ctrl.fw_version), - readl(&pt_zfwctrl->board_ctrl.n_channel)); + readl(&pt_zfwctrl->board_ctrl.fw_version), nchan); - if (readl(&pt_zfwctrl->board_ctrl.n_channel) == 0) { + if (nchan == 0) { dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please " "check the connection between the Z host card and the " "serial expanders.\n"); @@ -4922,7 +4900,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr, cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) | 0x00030800UL); - return 0; + return nchan; err_rel: release_firmware(fw); err: @@ -5027,12 +5005,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, if (mailbox == ZE_V1) { card_name = "Cyclades-Ze"; - - nchan = ZE_V1_NPORTS; } else { card_name = "Cyclades-8Zo"; - nchan = 8; - #ifdef CY_PCI_DEBUG if (mailbox == ZO_V1) { cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); @@ -5057,8 +5031,9 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, } retval = cyz_load_fw(pdev, addr2, addr0, irq); - if (retval) + if (retval <= 0) goto err_unmap; + nchan = retval; } if ((cy_next_channel + nchan) > NR_PORTS) { @@ -5088,7 +5063,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, dev_err(&pdev->dev, "could not allocate IRQ\n"); goto err_unmap; } - cy_card[card_no].num_chips = nchan / 4; + cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP; } else { cy_card[card_no].hw_ver = mailbox; cy_card[card_no].num_chips = (unsigned int)-1; @@ -5112,6 +5087,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev, cy_card[card_no].irq = irq; cy_card[card_no].bus_index = 1; cy_card[card_no].first_line = cy_next_channel; + cy_card[card_no].nports = nchan; retval = cy_init_card(&cy_card[card_no]); if (retval) goto err_null; -- cgit v1.2.2 From b39933fbd304021580800796683b8ddaa3dd0a6a Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:35:21 +0100 Subject: tty: cyclades, remove unused variables Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/cyclades.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 6adbc9759661..456019051742 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -2963,7 +2963,6 @@ static void set_line_char(struct cyclades_port *info) void __iomem *base_addr; int chip, channel, index; unsigned cflag, iflag; - unsigned short chip_number; int baud, baud_rate = 0; int i; @@ -2992,7 +2991,6 @@ static void set_line_char(struct cyclades_port *info) card = info->card; channel = info->line - card->first_line; - chip_number = channel / 4; if (!cy_is_Z(card)) { @@ -3212,9 +3210,7 @@ static void set_line_char(struct cyclades_port *info) } else { struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; - struct BOARD_CTRL __iomem *board_ctrl; struct CH_CTRL __iomem *ch_ctrl; - struct BUF_CTRL __iomem *buf_ctrl; __u32 sw_flow; int retval; @@ -3224,9 +3220,7 @@ static void set_line_char(struct cyclades_port *info) zfw_ctrl = card->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); - board_ctrl = &zfw_ctrl->board_ctrl; ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); - buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; /* baud rate */ baud = tty_get_baud_rate(info->port.tty); -- cgit v1.2.2 From 10077d4a6674f535abdbe25cdecb1202af7948f1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:36:09 +0100 Subject: tty: cdc_acm add krefs Now we have a port structure begin using the fields and kref counts Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/class/cdc-acm.c | 164 ++++++++++++++++++++++++++------------------ drivers/usb/class/cdc-acm.h | 2 - 2 files changed, 98 insertions(+), 68 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 41d4ca527f82..b4e73aa759d6 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -62,7 +62,7 @@ #include #include #include -#include +#include #include #include #include @@ -87,7 +87,7 @@ static struct acm *acm_table[ACM_TTY_MINORS]; static DEFINE_MUTEX(open_mutex); -#define ACM_READY(acm) (acm && acm->dev && acm->used) +#define ACM_READY(acm) (acm && acm->dev && acm->port.count) static const struct tty_port_operations acm_port_ops = { }; @@ -265,6 +265,7 @@ static void acm_ctrl_irq(struct urb *urb) { struct acm *acm = urb->context; struct usb_cdc_notification *dr = urb->transfer_buffer; + struct tty_struct *tty; unsigned char *data; int newctrl; int retval; @@ -297,12 +298,16 @@ static void acm_ctrl_irq(struct urb *urb) break; case USB_CDC_NOTIFY_SERIAL_STATE: - + tty = tty_port_tty_get(&acm->port); newctrl = get_unaligned_le16(data); - if (acm->tty && !acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { - dbg("calling hangup"); - tty_hangup(acm->tty); + if (tty) { + if (!acm->clocal && + (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { + dbg("calling hangup"); + tty_hangup(tty); + } + tty_kref_put(tty); } acm->ctrlin = newctrl; @@ -374,15 +379,14 @@ static void acm_rx_tasklet(unsigned long _acm) { struct acm *acm = (void *)_acm; struct acm_rb *buf; - struct tty_struct *tty = acm->tty; + struct tty_struct *tty; struct acm_ru *rcv; unsigned long flags; unsigned char throttled; dbg("Entering acm_rx_tasklet"); - if (!ACM_READY(acm)) - { + if (!ACM_READY(acm)) { dbg("acm_rx_tasklet: ACM not ready"); return; } @@ -390,12 +394,13 @@ static void acm_rx_tasklet(unsigned long _acm) spin_lock_irqsave(&acm->throttle_lock, flags); throttled = acm->throttle; spin_unlock_irqrestore(&acm->throttle_lock, flags); - if (throttled) - { + if (throttled) { dbg("acm_rx_tasklet: throttled"); return; } + tty = tty_port_tty_get(&acm->port); + next_buffer: spin_lock_irqsave(&acm->read_lock, flags); if (list_empty(&acm->filled_read_bufs)) { @@ -409,20 +414,22 @@ next_buffer: dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size); - tty_buffer_request_room(tty, buf->size); - spin_lock_irqsave(&acm->throttle_lock, flags); - throttled = acm->throttle; - spin_unlock_irqrestore(&acm->throttle_lock, flags); - if (!throttled) - tty_insert_flip_string(tty, buf->base, buf->size); - tty_flip_buffer_push(tty); - - if (throttled) { - dbg("Throttling noticed"); - spin_lock_irqsave(&acm->read_lock, flags); - list_add(&buf->list, &acm->filled_read_bufs); - spin_unlock_irqrestore(&acm->read_lock, flags); - return; + if (tty) { + spin_lock_irqsave(&acm->throttle_lock, flags); + throttled = acm->throttle; + spin_unlock_irqrestore(&acm->throttle_lock, flags); + if (!throttled) { + tty_buffer_request_room(tty, buf->size); + tty_insert_flip_string(tty, buf->base, buf->size); + tty_flip_buffer_push(tty); + } else { + tty_kref_put(tty); + dbg("Throttling noticed"); + spin_lock_irqsave(&acm->read_lock, flags); + list_add(&buf->list, &acm->filled_read_bufs); + spin_unlock_irqrestore(&acm->read_lock, flags); + return; + } } spin_lock_irqsave(&acm->read_lock, flags); @@ -431,6 +438,8 @@ next_buffer: goto next_buffer; urbs: + tty_kref_put(tty); + while (!list_empty(&acm->spare_read_bufs)) { spin_lock_irqsave(&acm->read_lock, flags); if (list_empty(&acm->spare_read_urbs)) { @@ -502,11 +511,14 @@ static void acm_write_bulk(struct urb *urb) static void acm_softint(struct work_struct *work) { struct acm *acm = container_of(work, struct acm, work); + struct tty_struct *tty; dev_vdbg(&acm->data->dev, "tx work\n"); if (!ACM_READY(acm)) return; - tty_wakeup(acm->tty); + tty = tty_port_tty_get(&acm->port); + tty_wakeup(tty); + tty_kref_put(tty); } static void acm_waker(struct work_struct *waker) @@ -546,8 +558,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) rv = 0; set_bit(TTY_NO_WRITE_SPLIT, &tty->flags); + tty->driver_data = acm; - acm->tty = tty; + tty_port_tty_set(&acm->port, tty); if (usb_autopm_get_interface(acm->control) < 0) goto early_bail; @@ -555,11 +568,10 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) acm->control->needs_remote_wakeup = 1; mutex_lock(&acm->mutex); - if (acm->used++) { + if (acm->port.count++) { usb_autopm_put_interface(acm->control); goto done; - } - + } acm->ctrlurb->dev = acm->dev; if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) { @@ -570,6 +582,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) && (acm->ctrl_caps & USB_CDC_CAP_LINE)) goto full_bailout; + usb_autopm_put_interface(acm->control); INIT_LIST_HEAD(&acm->spare_read_urbs); @@ -585,7 +598,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) acm->throttle = 0; tasklet_schedule(&acm->urb_task); - + rv = tty_port_block_til_ready(&acm->port, tty, filp); done: mutex_unlock(&acm->mutex); err_out: @@ -596,16 +609,17 @@ full_bailout: usb_kill_urb(acm->ctrlurb); bail_out: usb_autopm_put_interface(acm->control); - acm->used--; + acm->port.count--; mutex_unlock(&acm->mutex); early_bail: mutex_unlock(&open_mutex); + tty_port_tty_set(&acm->port, NULL); return -EIO; } static void acm_tty_unregister(struct acm *acm) { - int i,nr; + int i, nr; nr = acm->rx_buflimit; tty_unregister_device(acm_tty_driver, acm->minor); @@ -622,37 +636,51 @@ static void acm_tty_unregister(struct acm *acm) static int acm_tty_chars_in_buffer(struct tty_struct *tty); +static void acm_port_down(struct acm *acm, int drain) +{ + int i, nr = acm->rx_buflimit; + mutex_lock(&open_mutex); + if (acm->dev) { + usb_autopm_get_interface(acm->control); + acm_set_control(acm, acm->ctrlout = 0); + /* try letting the last writes drain naturally */ + if (drain) { + wait_event_interruptible_timeout(acm->drain_wait, + (ACM_NW == acm_wb_is_avail(acm)) || !acm->dev, + ACM_CLOSE_TIMEOUT * HZ); + } + usb_kill_urb(acm->ctrlurb); + for (i = 0; i < ACM_NW; i++) + usb_kill_urb(acm->wb[i].urb); + for (i = 0; i < nr; i++) + usb_kill_urb(acm->ru[i].urb); + acm->control->needs_remote_wakeup = 0; + usb_autopm_put_interface(acm->control); + } + mutex_unlock(&open_mutex); +} + +static void acm_tty_hangup(struct tty_struct *tty) +{ + struct acm *acm = tty->driver_data; + tty_port_hangup(&acm->port); + acm_port_down(acm, 0); +} + static void acm_tty_close(struct tty_struct *tty, struct file *filp) { struct acm *acm = tty->driver_data; - int i,nr; - if (!acm || !acm->used) + /* Perform the closing process and see if we need to do the hardware + shutdown */ + if (tty_port_close_start(&acm->port, tty, filp) == 0) return; - - nr = acm->rx_buflimit; + acm_port_down(acm, 0); + tty_port_close_end(&acm->port, tty); mutex_lock(&open_mutex); - if (!--acm->used) { - if (acm->dev) { - usb_autopm_get_interface(acm->control); - acm_set_control(acm, acm->ctrlout = 0); - - /* try letting the last writes drain naturally */ - wait_event_interruptible_timeout(acm->drain_wait, - (ACM_NW == acm_wb_is_avail(acm)) - || !acm->dev, - ACM_CLOSE_TIMEOUT * HZ); - - usb_kill_urb(acm->ctrlurb); - for (i = 0; i < ACM_NW; i++) - usb_kill_urb(acm->wb[i].urb); - for (i = 0; i < nr; i++) - usb_kill_urb(acm->ru[i].urb); - acm->control->needs_remote_wakeup = 0; - usb_autopm_put_interface(acm->control); - } else - acm_tty_unregister(acm); - } + tty_port_tty_set(&acm->port, NULL); + if (!acm->dev) + acm_tty_unregister(acm); mutex_unlock(&open_mutex); } @@ -885,8 +913,8 @@ static int acm_write_buffers_alloc(struct acm *acm) return 0; } -static int acm_probe (struct usb_interface *intf, - const struct usb_device_id *id) +static int acm_probe(struct usb_interface *intf, + const struct usb_device_id *id) { struct usb_cdc_union_desc *union_header = NULL; struct usb_cdc_country_functional_desc *cfd = NULL; @@ -1232,6 +1260,7 @@ static void acm_disconnect(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata(intf); struct usb_device *usb_dev = interface_to_usbdev(intf); + struct tty_struct *tty; /* sibling interface is already cleaning up */ if (!acm) @@ -1258,16 +1287,18 @@ static void acm_disconnect(struct usb_interface *intf) usb_driver_release_interface(&acm_driver, intf == acm->control ? acm->data : acm->control); - if (!acm->used) { + if (acm->port.count == 0) { acm_tty_unregister(acm); mutex_unlock(&open_mutex); return; } mutex_unlock(&open_mutex); - - if (acm->tty) - tty_hangup(acm->tty); + tty = tty_port_tty_get(&acm->port); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } } #ifdef CONFIG_PM @@ -1302,7 +1333,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message) */ mutex_lock(&acm->mutex); - if (acm->used) + if (acm->port.count) stop_data_traffic(acm); mutex_unlock(&acm->mutex); @@ -1324,7 +1355,7 @@ static int acm_resume(struct usb_interface *intf) return 0; mutex_lock(&acm->mutex); - if (acm->used) { + if (acm->port.count) { rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO); if (rv < 0) goto err_out; @@ -1434,6 +1465,7 @@ static struct usb_driver acm_driver = { static const struct tty_operations acm_ops = { .open = acm_tty_open, .close = acm_tty_close, + .hangup = acm_tty_hangup, .write = acm_tty_write, .write_room = acm_tty_write_room, .ioctl = acm_tty_ioctl, diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 19967cdb2691..4c3856420add 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -89,7 +89,6 @@ struct acm { struct usb_device *dev; /* the corresponding usb device */ struct usb_interface *control; /* control interface */ struct usb_interface *data; /* data interface */ - struct tty_struct *tty; /* the corresponding tty */ struct tty_port port; /* our tty port data */ struct urb *ctrlurb; /* urbs */ u8 *ctrl_buffer; /* buffers of urbs */ @@ -121,7 +120,6 @@ struct acm { unsigned int ctrlout; /* output control lines (DTR, RTS) */ unsigned int writesize; /* max packet size for the output bulk endpoint */ unsigned int readsize,ctrlsize; /* buffer sizes for freeing */ - unsigned int used; /* someone has this acm's device open */ unsigned int minor; /* acm minor number */ unsigned char throttle; /* throttled by tty layer */ unsigned char clocal; /* termios CLOCAL */ -- cgit v1.2.2 From 6e47e069eb4dffa88ad91ddfc3fd85f32c35654b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:37:06 +0100 Subject: tty: Clean up the ACM driver to CodingStyle Or at least most of it. There are further clean ups possible and there are are also thing checkpatch moans about that would be silly to "fix". Also note some FIXME points found as the cleanup was done. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/class/cdc-acm.c | 291 ++++++++++++++++++++++++-------------------- 1 file changed, 160 insertions(+), 131 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index b4e73aa759d6..ddeb69192537 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -16,7 +16,8 @@ * v0.9 - thorough cleaning, URBification, almost a rewrite * v0.10 - some more cleanups * v0.11 - fixed flow control, read error doesn't stop reads - * v0.12 - added TIOCM ioctls, added break handling, made struct acm kmalloced + * v0.12 - added TIOCM ioctls, added break handling, made struct acm + * kmalloced * v0.13 - added termios, added hangup * v0.14 - sized down struct acm * v0.15 - fixed flow control again - characters could be lost @@ -102,13 +103,15 @@ static const struct tty_port_operations acm_port_ops = { * Functions for ACM control messages. */ -static int acm_ctrl_msg(struct acm *acm, int request, int value, void *buf, int len) +static int acm_ctrl_msg(struct acm *acm, int request, int value, + void *buf, int len) { int retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0), request, USB_RT_ACM, value, acm->control->altsetting[0].desc.bInterfaceNumber, buf, len, 5000); - dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d", request, value, len, retval); + dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d", + request, value, len, retval); return retval < 0 ? retval : 0; } @@ -153,9 +156,8 @@ static int acm_wb_is_avail(struct acm *acm) n = ACM_NW; spin_lock_irqsave(&acm->write_lock, flags); - for (i = 0; i < ACM_NW; i++) { + for (i = 0; i < ACM_NW; i++) n -= acm->wb[i].use; - } spin_unlock_irqrestore(&acm->write_lock, flags); return n; } @@ -186,7 +188,8 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb) wb->urb->transfer_buffer_length = wb->len; wb->urb->dev = acm->dev; - if ((rc = usb_submit_urb(wb->urb, GFP_ATOMIC)) < 0) { + rc = usb_submit_urb(wb->urb, GFP_ATOMIC); + if (rc < 0) { dbg("usb_submit_urb(write bulk) failed: %d", rc); acm_write_done(acm, wb); } @@ -291,44 +294,45 @@ static void acm_ctrl_irq(struct urb *urb) data = (unsigned char *)(dr + 1); switch (dr->bNotificationType) { + case USB_CDC_NOTIFY_NETWORK_CONNECTION: + dbg("%s network", dr->wValue ? + "connected to" : "disconnected from"); + break; - case USB_CDC_NOTIFY_NETWORK_CONNECTION: + case USB_CDC_NOTIFY_SERIAL_STATE: + tty = tty_port_tty_get(&acm->port); + newctrl = get_unaligned_le16(data); - dbg("%s network", dr->wValue ? "connected to" : "disconnected from"); - break; - - case USB_CDC_NOTIFY_SERIAL_STATE: - tty = tty_port_tty_get(&acm->port); - newctrl = get_unaligned_le16(data); - - if (tty) { - if (!acm->clocal && - (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { - dbg("calling hangup"); - tty_hangup(tty); - } - tty_kref_put(tty); + if (tty) { + if (!acm->clocal && + (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { + dbg("calling hangup"); + tty_hangup(tty); } + tty_kref_put(tty); + } - acm->ctrlin = newctrl; - - dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c", - acm->ctrlin & ACM_CTRL_DCD ? '+' : '-', acm->ctrlin & ACM_CTRL_DSR ? '+' : '-', - acm->ctrlin & ACM_CTRL_BRK ? '+' : '-', acm->ctrlin & ACM_CTRL_RI ? '+' : '-', - acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-', acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-', - acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-'); + acm->ctrlin = newctrl; + dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c", + acm->ctrlin & ACM_CTRL_DCD ? '+' : '-', + acm->ctrlin & ACM_CTRL_DSR ? '+' : '-', + acm->ctrlin & ACM_CTRL_BRK ? '+' : '-', + acm->ctrlin & ACM_CTRL_RI ? '+' : '-', + acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-', + acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-', + acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-'); break; - default: - dbg("unknown notification %d received: index %d len %d data0 %d data1 %d", - dr->bNotificationType, dr->wIndex, - dr->wLength, data[0], data[1]); - break; + default: + dbg("unknown notification %d received: index %d len %d data0 %d data1 %d", + dr->bNotificationType, dr->wIndex, + dr->wLength, data[0], data[1]); + break; } exit: usb_mark_last_busy(acm->dev); - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with " "result %d", __func__, retval); @@ -466,10 +470,11 @@ urbs: rcv->urb->transfer_dma = buf->dma; rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - /* This shouldn't kill the driver as unsuccessful URBs are returned to the - free-urbs-pool and resubmited ASAP */ + /* This shouldn't kill the driver as unsuccessful URBs are + returned to the free-urbs-pool and resubmited ASAP */ spin_lock_irqsave(&acm->read_lock, flags); - if (acm->susp_count || usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) { + if (acm->susp_count || + usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) { list_add(&buf->list, &acm->spare_read_bufs); list_add(&rcv->list, &acm->spare_read_urbs); acm->processing = 0; @@ -588,12 +593,11 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) INIT_LIST_HEAD(&acm->spare_read_urbs); INIT_LIST_HEAD(&acm->spare_read_bufs); INIT_LIST_HEAD(&acm->filled_read_bufs); - for (i = 0; i < acm->rx_buflimit; i++) { + + for (i = 0; i < acm->rx_buflimit; i++) list_add(&(acm->ru[i].list), &acm->spare_read_urbs); - } - for (i = 0; i < acm->rx_buflimit; i++) { + for (i = 0; i < acm->rx_buflimit; i++) list_add(&(acm->rb[i].list), &acm->spare_read_bufs); - } acm->throttle = 0; @@ -684,7 +688,8 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&open_mutex); } -static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count) +static int acm_tty_write(struct tty_struct *tty, + const unsigned char *buf, int count) { struct acm *acm = tty->driver_data; int stat; @@ -700,7 +705,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c return 0; spin_lock_irqsave(&acm->write_lock, flags); - if ((wbn = acm_wb_alloc(acm)) < 0) { + wbn = acm_wb_alloc(acm); + if (wbn < 0) { spin_unlock_irqrestore(&acm->write_lock, flags); return 0; } @@ -712,7 +718,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c wb->len = count; spin_unlock_irqrestore(&acm->write_lock, flags); - if ((stat = acm_write_start(acm, wbn)) < 0) + stat = acm_write_start(acm, wbn); + if (stat < 0) return stat; return count; } @@ -798,8 +805,10 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file, return -EINVAL; newctrl = acm->ctrlout; - set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (set & TIOCM_RTS ? ACM_CTRL_RTS : 0); - clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0); + set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | + (set & TIOCM_RTS ? ACM_CTRL_RTS : 0); + clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | + (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0); newctrl = (newctrl & ~clear) | set; @@ -808,7 +817,8 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file, return acm_set_control(acm, acm->ctrlout = newctrl); } -static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) +static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) { struct acm *acm = tty->driver_data; @@ -830,7 +840,8 @@ static const __u8 acm_tty_size[] = { 5, 6, 7, 8 }; -static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old) +static void acm_tty_set_termios(struct tty_struct *tty, + struct ktermios *termios_old) { struct acm *acm = tty->driver_data; struct ktermios *termios = tty->termios; @@ -840,19 +851,23 @@ static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios if (!ACM_READY(acm)) return; + /* FIXME: Needs to support the tty_baud interface */ + /* FIXME: Broken on sparc */ newline.dwDTERate = cpu_to_le32p(acm_tty_speed + (termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0)); newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0; newline.bParityType = termios->c_cflag & PARENB ? - (termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; + (termios->c_cflag & PARODD ? 1 : 2) + + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4]; - + /* FIXME: Needs to clear unsupported bits in the termios */ acm->clocal = ((termios->c_cflag & CLOCAL) != 0); if (!newline.dwDTERate) { newline.dwDTERate = acm->line.dwDTERate; newctrl &= ~ACM_CTRL_DTR; - } else newctrl |= ACM_CTRL_DTR; + } else + newctrl |= ACM_CTRL_DTR; if (newctrl != acm->ctrlout) acm_set_control(acm, acm->ctrlout = newctrl); @@ -877,9 +892,8 @@ static void acm_write_buffers_free(struct acm *acm) struct acm_wb *wb; struct usb_device *usb_dev = interface_to_usbdev(acm->control); - for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) { + for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah); - } } static void acm_read_buffers_free(struct acm *acm) @@ -888,7 +902,8 @@ static void acm_read_buffers_free(struct acm *acm) int i, n = acm->rx_buflimit; for (i = 0; i < n; i++) - usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma); + usb_buffer_free(usb_dev, acm->readsize, + acm->rb[i].base, acm->rb[i].dma); } /* Little helper: write buffers allocate */ @@ -928,7 +943,7 @@ static int acm_probe(struct usb_interface *intf, struct usb_device *usb_dev = interface_to_usbdev(intf); struct acm *acm; int minor; - int ctrlsize,readsize; + int ctrlsize, readsize; u8 *buf; u8 ac_management_function = 0; u8 call_management_function = 0; @@ -948,7 +963,7 @@ static int acm_probe(struct usb_interface *intf, control_interface = usb_ifnum_to_if(usb_dev, 0); goto skip_normal_probe; } - + /* normal probing*/ if (!buffer) { dev_err(&intf->dev, "Weird descriptor references\n"); @@ -956,8 +971,10 @@ static int acm_probe(struct usb_interface *intf, } if (!buflen) { - if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) { - dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n"); + if (intf->cur_altsetting->endpoint->extralen && + intf->cur_altsetting->endpoint->extra) { + dev_dbg(&intf->dev, + "Seeking extra descriptors on endpoint\n"); buflen = intf->cur_altsetting->endpoint->extralen; buffer = intf->cur_altsetting->endpoint->extra; } else { @@ -968,47 +985,43 @@ static int acm_probe(struct usb_interface *intf, } while (buflen > 0) { - if (buffer [1] != USB_DT_CS_INTERFACE) { + if (buffer[1] != USB_DT_CS_INTERFACE) { dev_err(&intf->dev, "skipping garbage\n"); goto next_desc; } - switch (buffer [2]) { - case USB_CDC_UNION_TYPE: /* we've found it */ - if (union_header) { - dev_err(&intf->dev, "More than one " - "union descriptor, " - "skipping ...\n"); - goto next_desc; - } - union_header = (struct usb_cdc_union_desc *) - buffer; - break; - case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/ - cfd = (struct usb_cdc_country_functional_desc *)buffer; - break; - case USB_CDC_HEADER_TYPE: /* maybe check version */ - break; /* for now we ignore it */ - case USB_CDC_ACM_TYPE: - ac_management_function = buffer[3]; - break; - case USB_CDC_CALL_MANAGEMENT_TYPE: - call_management_function = buffer[3]; - call_interface_num = buffer[4]; - if ((call_management_function & 3) != 3) - dev_err(&intf->dev, "This device " - "cannot do calls on its own. " - "It is no modem.\n"); - break; - default: - /* there are LOTS more CDC descriptors that - * could legitimately be found here. - */ - dev_dbg(&intf->dev, "Ignoring descriptor: " - "type %02x, length %d\n", - buffer[2], buffer[0]); - break; + switch (buffer[2]) { + case USB_CDC_UNION_TYPE: /* we've found it */ + if (union_header) { + dev_err(&intf->dev, "More than one " + "union descriptor, skipping ...\n"); + goto next_desc; } + union_header = (struct usb_cdc_union_desc *)buffer; + break; + case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/ + cfd = (struct usb_cdc_country_functional_desc *)buffer; + break; + case USB_CDC_HEADER_TYPE: /* maybe check version */ + break; /* for now we ignore it */ + case USB_CDC_ACM_TYPE: + ac_management_function = buffer[3]; + break; + case USB_CDC_CALL_MANAGEMENT_TYPE: + call_management_function = buffer[3]; + call_interface_num = buffer[4]; + if ((call_management_function & 3) != 3) + dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n"); + break; + default: + /* there are LOTS more CDC descriptors that + * could legitimately be found here. + */ + dev_dbg(&intf->dev, "Ignoring descriptor: " + "type %02x, length %d\n", + buffer[2], buffer[0]); + break; + } next_desc: buflen -= buffer[0]; buffer += buffer[0]; @@ -1016,33 +1029,36 @@ next_desc: if (!union_header) { if (call_interface_num > 0) { - dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n"); + dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n"); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num)); control_interface = intf; } else { - dev_dbg(&intf->dev,"No union descriptor, giving up\n"); + dev_dbg(&intf->dev, + "No union descriptor, giving up\n"); return -ENODEV; } } else { control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0)); if (!control_interface || !data_interface) { - dev_dbg(&intf->dev,"no interfaces\n"); + dev_dbg(&intf->dev, "no interfaces\n"); return -ENODEV; } } - + if (data_interface_num != call_interface_num) - dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n"); + dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n"); skip_normal_probe: /*workaround for switched interfaces */ - if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) { - if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) { + if (data_interface->cur_altsetting->desc.bInterfaceClass + != CDC_DATA_INTERFACE_TYPE) { + if (control_interface->cur_altsetting->desc.bInterfaceClass + == CDC_DATA_INTERFACE_TYPE) { struct usb_interface *t; - dev_dbg(&intf->dev,"Your device has switched interfaces.\n"); - + dev_dbg(&intf->dev, + "Your device has switched interfaces.\n"); t = control_interface; control_interface = data_interface; data_interface = t; @@ -1054,9 +1070,9 @@ skip_normal_probe: /* Accept probe requests only for the control interface */ if (intf != control_interface) return -ENODEV; - + if (usb_interface_claimed(data_interface)) { /* valid in this context */ - dev_dbg(&intf->dev,"The data interface isn't available\n"); + dev_dbg(&intf->dev, "The data interface isn't available\n"); return -EBUSY; } @@ -1073,8 +1089,8 @@ skip_normal_probe: if (!usb_endpoint_dir_in(epread)) { /* descriptors are swapped */ struct usb_endpoint_descriptor *t; - dev_dbg(&intf->dev,"The data interface has switched endpoints\n"); - + dev_dbg(&intf->dev, + "The data interface has switched endpoints\n"); t = epread; epread = epwrite; epwrite = t; @@ -1087,13 +1103,15 @@ skip_normal_probe: return -ENODEV; } - if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) { + acm = kzalloc(sizeof(struct acm), GFP_KERNEL); + if (acm == NULL) { dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n"); goto alloc_fail; } ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize); - readsize = le16_to_cpu(epread->wMaxPacketSize)* ( quirks == SINGLE_RX_URB ? 1 : 2); + readsize = le16_to_cpu(epread->wMaxPacketSize) * + (quirks == SINGLE_RX_URB ? 1 : 2); acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20; acm->control = control_interface; acm->data = data_interface; @@ -1136,8 +1154,10 @@ skip_normal_probe: for (i = 0; i < num_rx_buf; i++) { struct acm_ru *rcv = &(acm->ru[i]); - if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n"); + rcv->urb = usb_alloc_urb(0, GFP_KERNEL); + if (rcv->urb == NULL) { + dev_dbg(&intf->dev, + "out of memory (read urbs usb_alloc_urb)\n"); goto alloc_fail7; } @@ -1150,26 +1170,29 @@ skip_normal_probe: rb->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &rb->dma); if (!rb->base) { - dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n"); + dev_dbg(&intf->dev, + "out of memory (read bufs usb_buffer_alloc)\n"); goto alloc_fail7; } } - for(i = 0; i < ACM_NW; i++) - { + for (i = 0; i < ACM_NW; i++) { struct acm_wb *snd = &(acm->wb[i]); - if (!(snd->urb = usb_alloc_urb(0, GFP_KERNEL))) { - dev_dbg(&intf->dev, "out of memory (write urbs usb_alloc_urb)"); + snd->urb = usb_alloc_urb(0, GFP_KERNEL); + if (snd->urb == NULL) { + dev_dbg(&intf->dev, + "out of memory (write urbs usb_alloc_urb)"); goto alloc_fail7; } - usb_fill_bulk_urb(snd->urb, usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), - NULL, acm->writesize, acm_write_bulk, snd); + usb_fill_bulk_urb(snd->urb, usb_dev, + usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), + NULL, acm->writesize, acm_write_bulk, snd); snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; snd->instance = acm; } - usb_set_intfdata (intf, acm); + usb_set_intfdata(intf, acm); i = device_create_file(&intf->dev, &dev_attr_bmCapabilities); if (i < 0) @@ -1180,7 +1203,8 @@ skip_normal_probe: if (!acm->country_codes) goto skip_countries; acm->country_code_size = cfd->bLength - 4; - memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, cfd->bLength - 4); + memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, + cfd->bLength - 4); acm->country_rel_date = cfd->iCountryCodeRelDate; i = device_create_file(&intf->dev, &dev_attr_wCountryCodes); @@ -1189,7 +1213,8 @@ skip_normal_probe: goto skip_countries; } - i = device_create_file(&intf->dev, &dev_attr_iCountryCodeRelDate); + i = device_create_file(&intf->dev, + &dev_attr_iCountryCodeRelDate); if (i < 0) { kfree(acm->country_codes); goto skip_countries; @@ -1197,8 +1222,10 @@ skip_normal_probe: } skip_countries: - usb_fill_int_urb(acm->ctrlurb, usb_dev, usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress), - acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval); + usb_fill_int_urb(acm->ctrlurb, usb_dev, + usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress), + acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, + epctrl->bInterval); acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; acm->ctrlurb->transfer_dma = acm->ctrl_dma; @@ -1245,7 +1272,7 @@ static void stop_data_traffic(struct acm *acm) tasklet_disable(&acm->urb_task); usb_kill_urb(acm->ctrlurb); - for(i = 0; i < ACM_NW; i++) + for (i = 0; i < ACM_NW; i++) usb_kill_urb(acm->wb[i].urb); for (i = 0; i < acm->rx_buflimit; i++) usb_kill_urb(acm->ru[i].urb); @@ -1267,7 +1294,7 @@ static void acm_disconnect(struct usb_interface *intf) return; mutex_lock(&open_mutex); - if (acm->country_codes){ + if (acm->country_codes) { device_remove_file(&acm->control->dev, &dev_attr_wCountryCodes); device_remove_file(&acm->control->dev, @@ -1281,7 +1308,8 @@ static void acm_disconnect(struct usb_interface *intf) stop_data_traffic(acm); acm_write_buffers_free(acm); - usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); + usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, + acm->ctrl_dma); acm_read_buffers_free(acm); usb_driver_release_interface(&acm_driver, intf == acm->control ? @@ -1434,7 +1462,7 @@ static struct usb_device_id acm_ids[] = { { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_GSM) }, { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, - USB_CDC_ACM_PROTO_AT_3G ) }, + USB_CDC_ACM_PROTO_AT_3G) }, { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_CDMA) }, @@ -1442,7 +1470,7 @@ static struct usb_device_id acm_ids[] = { { } }; -MODULE_DEVICE_TABLE (usb, acm_ids); +MODULE_DEVICE_TABLE(usb, acm_ids); static struct usb_driver acm_driver = { .name = "cdc_acm", @@ -1497,7 +1525,8 @@ static int __init acm_init(void) acm_tty_driver->subtype = SERIAL_TYPE_NORMAL, acm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; acm_tty_driver->init_termios = tty_std_termios; - acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | + HUPCL | CLOCAL; tty_set_operations(acm_tty_driver, &acm_ops); retval = tty_register_driver(acm_tty_driver); @@ -1529,7 +1558,7 @@ static void __exit acm_exit(void) module_init(acm_init); module_exit(acm_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR); -- cgit v1.2.2 From 70beaed22cbe12979e55d99b370e147e2e168562 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:39:12 +0100 Subject: serial: refactor ASYNC_ flags Define ASYNCB_* flags which are bit numbers of the ASYNC_* flags. This is useful for {test,set,clear}_bit. Also convert each ASYNC_% to be (1 << ASYNCB_%) and define masks with the macros, not constants. Tested with: #include "PATH_TO_KERNEL/include/linux/serial.h" static struct { unsigned int new, old; } as[] = { { ASYNC_HUP_NOTIFY, 0x0001 }, { ASYNC_FOURPORT, 0x0002 }, ... { ASYNC_BOOT_ONLYMCA, 0x00400000 }, { ASYNC_INTERNAL_FLAGS, 0xFFC00000 } }; ... for (a = 0; a < ARRAY_SIZE(as); a++) if (as[a].old != as[a].new) printf("%.8x != %.8x\n", as[a].old, as[a].new); Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/serial.h | 116 +++++++++++++++++++++++++++++-------------------- 1 file changed, 69 insertions(+), 47 deletions(-) diff --git a/include/linux/serial.h b/include/linux/serial.h index 9136cc5608c3..e5bb75a63802 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -96,54 +96,76 @@ struct serial_uart_config { /* * Definitions for async_struct (and serial_struct) flags field + * + * Define ASYNCB_* for convenient use with {test,set,clear}_bit. */ -#define ASYNC_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes - on the callout port */ -#define ASYNC_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */ -#define ASYNC_SAK 0x0004 /* Secure Attention Key (Orange book) */ -#define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */ - -#define ASYNC_SPD_MASK 0x1030 -#define ASYNC_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */ - -#define ASYNC_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */ -#define ASYNC_SPD_CUST 0x0030 /* Use user-specified divisor */ - -#define ASYNC_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */ -#define ASYNC_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */ -#define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */ -#define ASYNC_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */ -#define ASYNC_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */ - -#define ASYNC_HARDPPS_CD 0x0800 /* Call hardpps when CD goes high */ - -#define ASYNC_SPD_SHI 0x1000 /* Use 230400 instead of 38400 bps */ -#define ASYNC_SPD_WARP 0x1010 /* Use 460800 instead of 38400 bps */ - -#define ASYNC_LOW_LATENCY 0x2000 /* Request low latency behaviour */ - -#define ASYNC_BUGGY_UART 0x4000 /* This is a buggy UART, skip some safety - * checks. Note: can be dangerous! */ - -#define ASYNC_AUTOPROBE 0x8000 /* Port was autoprobed by PCI or PNP code */ - -#define ASYNC_FLAGS 0x7FFF /* Possible legal async flags */ -#define ASYNC_USR_MASK 0x3430 /* Legal flags that non-privileged - * users can set or reset */ - -/* Internal flags used only by kernel/chr_drv/serial.c */ -#define ASYNC_INITIALIZED 0x80000000 /* Serial port was initialized */ -#define ASYNC_NORMAL_ACTIVE 0x20000000 /* Normal device is active */ -#define ASYNC_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */ -#define ASYNC_CLOSING 0x08000000 /* Serial port is closing */ -#define ASYNC_CTS_FLOW 0x04000000 /* Do CTS flow control */ -#define ASYNC_CHECK_CD 0x02000000 /* i.e., CLOCAL */ -#define ASYNC_SHARE_IRQ 0x01000000 /* for multifunction cards - --- no longer used */ -#define ASYNC_CONS_FLOW 0x00800000 /* flow control for console */ - -#define ASYNC_BOOT_ONLYMCA 0x00400000 /* Probe only if MCA bus */ -#define ASYNC_INTERNAL_FLAGS 0xFFC00000 /* Internal flags */ +#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes + * on the callout port */ +#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */ +#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */ +#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */ +#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */ +#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */ +#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */ +#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during + * autoconfiguration */ +#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */ +#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */ +#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */ +#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */ +#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */ +#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */ +#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety + * checks. Note: can be dangerous! */ +#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */ +#define ASYNCB_LAST_USER 15 + +/* Internal flags used only by kernel */ +#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */ +#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */ +#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */ +#define ASYNCB_CLOSING 27 /* Serial port is closing */ +#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */ +#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */ +#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */ +#define ASYNCB_CONS_FLOW 23 /* flow control for console */ +#define ASYNCB_BOOT_ONLYMCA 22 /* Probe only if MCA bus */ +#define ASYNCB_FIRST_KERNEL 22 + +#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY) +#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT) +#define ASYNC_SAK (1U << ASYNCB_SAK) +#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS) +#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI) +#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI) +#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST) +#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ) +#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT) +#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT) +#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP) +#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD) +#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI) +#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY) +#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART) +#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE) + +#define ASYNC_FLAGS ((1U << ASYNCB_LAST_USER) - 1) +#define ASYNC_USR_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI| \ + ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY) +#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) +#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI) +#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI) + +#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED) +#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE) +#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF) +#define ASYNC_CLOSING (1U << ASYNCB_CLOSING) +#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW) +#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD) +#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ) +#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW) +#define ASYNC_BOOT_ONLYMCA (1U << ASYNCB_BOOT_ONLYMCA) +#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1)) /* * Multiport serial configuration structure --- external structure -- cgit v1.2.2 From a391ad0f09014856bbc4eeea309593eba977b3b0 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:40:17 +0100 Subject: rocket: fix test_bit parameters Switch from ASYNC_* to ASYNCB_*, because {test,set}_bit expect bit number, not mask. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/rocket.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 7399188049d8..63d5b628477a 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -939,7 +939,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) /* * Info->count is now 1; so it's safe to sleep now. */ - if (!test_bit(ASYNC_INITIALIZED, &port->flags)) { + if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) { cp = &info->channel; sSetRxTrigger(cp, TRIG_1); if (sGetChanStatus(cp) & CD_ACT) @@ -963,7 +963,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp) sEnRxFIFO(cp); sEnTransmit(cp); - set_bit(ASYNC_INITIALIZED, &info->port.flags); + set_bit(ASYNCB_INITIALIZED, &info->port.flags); /* * Set up the tty->alt_speed kludge @@ -1646,7 +1646,7 @@ static int rp_write(struct tty_struct *tty, /* Write remaining data into the port's xmit_buf */ while (1) { /* Hung up ? */ - if (!test_bit(ASYNC_NORMAL_ACTIVE, &info->port.flags)) + if (!test_bit(ASYNCB_NORMAL_ACTIVE, &info->port.flags)) goto end; c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1); c = min(c, XMIT_BUF_SIZE - info->xmit_head); -- cgit v1.2.2 From c3301a5c04800bcf8afc8a815bf9e570a4e25a08 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 12:41:05 +0100 Subject: epca: fix test_bit parameters Switch from ASYNC_* to ASYNCB_*, because test_bit expects bit number, not mask. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/epca.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/char/epca.c b/drivers/char/epca.c index 8797b7742350..710ee9333057 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -1518,7 +1518,7 @@ static void doevent(int crd) if (event & MODEMCHG_IND) { /* A modem signal change has been indicated */ ch->imodem = mstat; - if (test_bit(ASYNC_CHECK_CD, &ch->port.flags)) { + if (test_bit(ASYNCB_CHECK_CD, &ch->port.flags)) { /* We are now receiving dcd */ if (mstat & ch->dcd) wake_up_interruptible(&ch->port.open_wait); @@ -1765,9 +1765,9 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch) * that the driver will wait on carrier detect. */ if (ts->c_cflag & CLOCAL) - clear_bit(ASYNC_CHECK_CD, &ch->port.flags); + clear_bit(ASYNCB_CHECK_CD, &ch->port.flags); else - set_bit(ASYNC_CHECK_CD, &ch->port.flags); + set_bit(ASYNCB_CHECK_CD, &ch->port.flags); mval = ch->m_dtr | ch->m_rts; } /* End CBAUD not detected */ iflag = termios2digi_i(ch, ts->c_iflag); @@ -2244,7 +2244,8 @@ static void do_softint(struct work_struct *work) if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) { tty_hangup(tty); wake_up_interruptible(&ch->port.open_wait); - clear_bit(ASYNC_NORMAL_ACTIVE, &ch->port.flags); + clear_bit(ASYNCB_NORMAL_ACTIVE, + &ch->port.flags); } } tty_kref_put(tty); -- cgit v1.2.2 From 70fd8fdecc4430ffcede7704dd812d4054d1faf9 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Thu, 11 Jun 2009 12:41:57 +0100 Subject: 8250_pci: add the OXCB950 chip to the 8250 PCI driver. This adds support for the following serial controller chip: Oxford Semiconductor OXCB950 for PCI Cardbus interface http://www.transdimension.com/products/serial/OXCB950.html on this card: ExSys EX-1370 1 port high-speed serial card for ExpressCard/34 slot Signed-off-by: Andre Przywara Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/8250_pci.c | 3 +++ include/linux/pci_ids.h | 2 ++ 2 files changed, 5 insertions(+) diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 938bc1b6c3fa..e371a9c15341 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -2776,6 +2776,9 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_OXSEMI, 0x950a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_2_1130000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, + PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, + pbn_b0_1_921600 }, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_4_115200 }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 0f71812d67d3..d7d1c41a0b17 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1996,10 +1996,12 @@ #define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U 0xC118 #define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU 0xC11C #define PCI_DEVICE_ID_OXSEMI_16PCI954 0x9501 +#define PCI_DEVICE_ID_OXSEMI_C950 0x950B #define PCI_DEVICE_ID_OXSEMI_16PCI95N 0x9511 #define PCI_DEVICE_ID_OXSEMI_16PCI954PP 0x9513 #define PCI_DEVICE_ID_OXSEMI_16PCI952 0x9521 #define PCI_DEVICE_ID_OXSEMI_16PCI952PP 0x9523 +#define PCI_SUBDEVICE_ID_OXSEMI_C950 0x0001 #define PCI_VENDOR_ID_CHELSIO 0x1425 -- cgit v1.2.2 From 5b0ed5263cb089500052f8c1ab6e0706bebf0d83 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 11 Jun 2009 12:42:49 +0100 Subject: x86: fix ktermios-termio conversion The legacy TCSETA{,W,F} ioctls failed to set the termio->c_line field on x86. This adds a missing get_user. The same ioctls also fail to report faulting user pointers, which we keep ignoring. Signed-off-by: Arnd Bergmann Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- arch/x86/include/asm/termios.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/include/asm/termios.h b/arch/x86/include/asm/termios.h index f72956331c49..c4ee8056baca 100644 --- a/arch/x86/include/asm/termios.h +++ b/arch/x86/include/asm/termios.h @@ -67,6 +67,7 @@ static inline int user_termio_to_kernel_termios(struct ktermios *termios, SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); + get_user(termios->c_line, &termio->c_line); return copy_from_user(termios->c_cc, termio->c_cc, NCC); } -- cgit v1.2.2 From 38db89799bdf11625a831c5af33938dcb11908b6 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:44:17 +0100 Subject: tty: throttling race fix The tty throttling code can race due to the lock drops. It takes very high loads but this has been observed and verified by Rob Duncan. The basic problem is that on an SMP box we can go CPU #1 CPU #2 need to throttle ? suppose we should buffer space cleared are we throttled yes ? - unthrottle call throttle method This changeet take the termios lock to protect against this. The termios lock isn't the initial obvious candidate but many implementations of throttle methods already need to poke around their own termios structures (and nobody really locks them against a racing change of flow control). This does mean that anyone who is setting tty->low_latency = 1 and then calling tty_flip_buffer_push from their unthrottle method is going to end up collapsing in a pile of locks. However we've removed all the known bogus users of low_latency = 1 and such use isn't safe anyway for other reasons so catching it would be an improvement. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ioctl.c | 13 +++++++++++++ include/linux/tty_driver.h | 6 ++++-- 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 6f4c7d0a53bf..2401dbcbee9c 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -97,14 +97,19 @@ EXPORT_SYMBOL(tty_driver_flush_buffer); * @tty: terminal * * Indicate that a tty should stop transmitting data down the stack. + * Takes the termios mutex to protect against parallel throttle/unthrottle + * and also to ensure the driver can consistently reference its own + * termios data at this point when implementing software flow control. */ void tty_throttle(struct tty_struct *tty) { + mutex_lock(&tty->termios_mutex); /* check TTY_THROTTLED first so it indicates our state */ if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) && tty->ops->throttle) tty->ops->throttle(tty); + mutex_unlock(&tty->termios_mutex); } EXPORT_SYMBOL(tty_throttle); @@ -113,13 +118,21 @@ EXPORT_SYMBOL(tty_throttle); * @tty: terminal * * Indicate that a tty may continue transmitting data down the stack. + * Takes the termios mutex to protect against parallel throttle/unthrottle + * and also to ensure the driver can consistently reference its own + * termios data at this point when implementing software flow control. + * + * Drivers should however remember that the stack can issue a throttle, + * then change flow control method, then unthrottle. */ void tty_unthrottle(struct tty_struct *tty) { + mutex_lock(&tty->termios_mutex); if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) && tty->ops->unthrottle) tty->ops->unthrottle(tty); + mutex_unlock(&tty->termios_mutex); } EXPORT_SYMBOL(tty_unthrottle); diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index bcba84ea2d86..3566129384a4 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -127,7 +127,8 @@ * the line discipline are close to full, and it should somehow * signal that no more characters should be sent to the tty. * - * Optional: Always invoke via tty_throttle(); + * Optional: Always invoke via tty_throttle(), called under the + * termios lock. * * void (*unthrottle)(struct tty_struct * tty); * @@ -135,7 +136,8 @@ * that characters can now be sent to the tty without fear of * overrunning the input buffers of the line disciplines. * - * Optional: Always invoke via tty_unthrottle(); + * Optional: Always invoke via tty_unthrottle(), called under the + * termios lock. * * void (*stop)(struct tty_struct *tty); * -- cgit v1.2.2 From 4b6ae89ef40d0d5d4c85098c1d0a012333a68729 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:45:08 +0100 Subject: serial: update maintainers file Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index cf4abddfc8a4..1979167c16dc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -159,7 +159,8 @@ F: drivers/net/r8169.c 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER L: linux-serial@vger.kernel.org W: http://serial.sourceforge.net -S: Orphan +M: alan@lxorguk.ukuu.org.uk +S: Odd Fixes F: drivers/serial/8250* F: include/linux/serial_8250.h -- cgit v1.2.2 From 620df3c0a5b70656c4de6049825de214f108218e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:45:53 +0100 Subject: pty: Fix a comment We fixed the globals, so now fix the comment Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/pty.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 31038a0052a2..da2cb8c70c11 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -30,7 +30,6 @@ #include -/* These are global because they are accessed in tty_io.c */ #ifdef CONFIG_UNIX98_PTYS static struct tty_driver *ptm_driver; static struct tty_driver *pts_driver; -- cgit v1.2.2 From 5f0878acba7db24323f5ba4055ec9a96895bb150 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:46:41 +0100 Subject: tty: Fix oops when scanning the polling list for kgdb Costantino Leandro found a bug in tty_find_polling_driver and provided a patch that fixed the crash but not the underlying bug. This fixes the underlying bug where the list walk corrupts the values it is using on a match but then reuses them if the open fails. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 66b99a2049e3..6c817398232e 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -295,7 +295,7 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line) struct tty_driver *p, *res = NULL; int tty_line = 0; int len; - char *str; + char *str, *stp; for (str = name; *str; str++) if ((*str >= '0' && *str <= '9') || *str == ',') @@ -311,13 +311,14 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line) list_for_each_entry(p, &tty_drivers, tty_drivers) { if (strncmp(name, p->name, len) != 0) continue; - if (*str == ',') - str++; - if (*str == '\0') - str = NULL; + stp = str; + if (*stp == ',') + stp++; + if (*stp == '\0') + stp = NULL; if (tty_line >= 0 && tty_line <= p->num && p->ops && - p->ops->poll_init && !p->ops->poll_init(p, tty_line, str)) { + p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) { res = tty_driver_kref_get(p); *line = tty_line; break; -- cgit v1.2.2 From e8b70e7d3e86319a8b2aaabde3866833d92cd80f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:48:02 +0100 Subject: tty: Extract various bits of ldisc code Before trying to tackle the ldisc bugs the code needs to be a good deal more readable, so do the simple extractions of routines first. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 24 +++++++++--- drivers/char/tty_ldisc.c | 97 ++++++++++++++++++++++++++++++++---------------- include/linux/tty.h | 3 ++ 3 files changed, 88 insertions(+), 36 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 6c817398232e..be49d0730bb9 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -2481,6 +2481,24 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int return tty->ops->tiocmset(tty, file, set, clear); } +struct tty_struct *tty_pair_get_tty(struct tty_struct *tty) +{ + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER) + tty = tty->link; + return tty; +} +EXPORT_SYMBOL(tty_pair_get_tty); + +struct tty_struct *tty_pair_get_pty(struct tty_struct *tty) +{ + if (tty->driver->type == TTY_DRIVER_TYPE_PTY && + tty->driver->subtype == PTY_TYPE_MASTER) + return tty; + return tty->link; +} +EXPORT_SYMBOL(tty_pair_get_pty); + /* * Split this up, as gcc can choke on it otherwise.. */ @@ -2496,11 +2514,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (tty_paranoia_check(tty, inode, "tty_ioctl")) return -EINVAL; - real_tty = tty; - if (tty->driver->type == TTY_DRIVER_TYPE_PTY && - tty->driver->subtype == PTY_TYPE_MASTER) - real_tty = tty->link; - + real_tty = tty_pair_get_tty(tty); /* * Factor out some common prep work diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index f78f5b0127a8..e3c6416aa86d 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -443,6 +443,50 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) } } +/** + * tty_ldisc_halt - shutdown the line discipline + * @tty: tty device + * + * Shut down the line discipline and work queue for this tty device. + * The TTY_LDISC flag being cleared ensures no further references can + * be obtained while the delayed work queue halt ensures that no more + * data is fed to the ldisc. + * + * In order to wait for any existing references to complete see + * tty_ldisc_wait_idle. + */ + +static void tty_ldisc_halt(struct tty_struct *tty) +{ + clear_bit(TTY_LDISC, &tty->flags); + cancel_delayed_work(&tty->buf.work); + /* + * Wait for ->hangup_work and ->buf.work handlers to terminate + */ + flush_scheduled_work(); +} + +/** + * tty_ldisc_wait_idle - wait for the ldisc to become idle + * @tty: tty to wait for + * + * Wait for the line discipline to become idle. The discipline must + * have been halted for this to guarantee it remains idle. + * + */ + +static void tty_ldisc_wait_idle(struct tty_struct *tty) +{ + unsigned long flags; + spin_lock_irqsave(&tty_ldisc_lock, flags); + while (tty->ldisc.refcount) { + spin_unlock_irqrestore(&tty_ldisc_lock, flags); + wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0); + spin_lock_irqsave(&tty_ldisc_lock, flags); + } + spin_unlock_irqrestore(&tty_ldisc_lock, flags); +} + /** * tty_set_ldisc - set line discipline * @tty: the terminal to set @@ -636,6 +680,21 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) return 0; } +static void tty_ldisc_reinit(struct tty_struct *tty) +{ + struct tty_ldisc ld; + + if (tty->ldisc.ops->close) + (tty->ldisc.ops->close)(tty); + tty_ldisc_put(tty->ldisc.ops); + /* + * Switch the line discipline back + */ + WARN_ON(tty_ldisc_get(N_TTY, &ld)); + tty_ldisc_assign(tty, &ld); + tty_set_termios_ldisc(tty, N_TTY); +} + /** * tty_ldisc_release - release line discipline * @tty: tty being shut down @@ -647,58 +706,34 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) { - unsigned long flags; - struct tty_ldisc ld; + /* * Prevent flush_to_ldisc() from rescheduling the work for later. Then * kill any delayed work. As this is the final close it does not * race with the set_ldisc code path. */ - clear_bit(TTY_LDISC, &tty->flags); - cancel_delayed_work(&tty->buf.work); - /* - * Wait for ->hangup_work and ->buf.work handlers to terminate - */ - - flush_scheduled_work(); + tty_ldisc_halt(tty); /* * Wait for any short term users (we know they are just driver * side waiters as the file is closing so user count on the file * side is zero. */ - spin_lock_irqsave(&tty_ldisc_lock, flags); - while (tty->ldisc.refcount) { - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0); - spin_lock_irqsave(&tty_ldisc_lock, flags); - } - spin_unlock_irqrestore(&tty_ldisc_lock, flags); + + tty_ldisc_wait_idle(tty); + /* * Shutdown the current line discipline, and reset it to N_TTY. * * FIXME: this MUST get fixed for the new reflocking */ - if (tty->ldisc.ops->close) - (tty->ldisc.ops->close)(tty); - tty_ldisc_put(tty->ldisc.ops); - /* - * Switch the line discipline back - */ - WARN_ON(tty_ldisc_get(N_TTY, &ld)); - tty_ldisc_assign(tty, &ld); - tty_set_termios_ldisc(tty, N_TTY); + tty_ldisc_reinit(tty); if (o_tty) { /* FIXME: could o_tty be in setldisc here ? */ clear_bit(TTY_LDISC, &o_tty->flags); - if (o_tty->ldisc.ops->close) - (o_tty->ldisc.ops->close)(o_tty); - tty_ldisc_put(o_tty->ldisc.ops); - WARN_ON(tty_ldisc_get(N_TTY, &ld)); - tty_ldisc_assign(o_tty, &ld); - tty_set_termios_ldisc(o_tty, N_TTY); + tty_ldisc_reinit(o_tty); } } diff --git a/include/linux/tty.h b/include/linux/tty.h index bed5a3d40307..f9c13c83790c 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -428,6 +428,9 @@ extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, extern void tty_release_dev(struct file *filp); extern int tty_init_termios(struct tty_struct *tty); +extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty); +extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty); + extern struct mutex tty_mutex; extern void tty_write_unlock(struct tty_struct *tty); -- cgit v1.2.2 From c65c9bc3efa5589f691276bb9db689119a711222 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:50:12 +0100 Subject: tty: rewrite the ldisc locking There are several pretty much unfixable races in the old ldisc code, especially with respect to pty behaviour and also to hangup. It's easier to rewrite the code than simply try and patch it up. This patch - splits the ldisc from the tty (so we will be able to refcount it more cleanly later) - introduces a mutex lock for ldisc changing on an active device - fixes the complete mess that hangup caused - implements hopefully correct setldisc/close/hangup locking There are still some problems around pty pairs that have always been there but at least it is now possible to understand the code and fix further problems. This fixes the following known bugs - hang up can leak ldisc references - hang up may not call open/close on ldisc in a matched way - pty/tty pairs can deadlock during an ldisc change - reading the ldisc proc files can cause every ldisc to be loaded and probably a few other of the mysterious ldisc race reports. I'm sure it also adds the odd new one. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/bluetooth/hci_ldisc.c | 4 +- drivers/char/cyclades.c | 2 +- drivers/char/epca.c | 4 +- drivers/char/ip2/i2lib.c | 4 +- drivers/char/ip2/ip2main.c | 4 +- drivers/char/n_hdlc.c | 4 +- drivers/char/pty.c | 10 +- drivers/char/selection.c | 2 +- drivers/char/tty_io.c | 64 +----- drivers/char/tty_ldisc.c | 477 ++++++++++++++++++++++++++---------------- include/linux/tty.h | 9 +- 11 files changed, 330 insertions(+), 254 deletions(-) diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index af761dc434f6..688015128594 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -277,8 +277,8 @@ static int hci_uart_tty_open(struct tty_struct *tty) /* FIXME: why is this needed. Note don't use ldisc_ref here as the open path is before the ldisc is referencable */ - if (tty->ldisc.ops->flush_buffer) - tty->ldisc.ops->flush_buffer(tty); + if (tty->ldisc->ops->flush_buffer) + tty->ldisc->ops->flush_buffer(tty); tty_driver_flush_buffer(tty); return 0; diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 456019051742..f3366d3f06cf 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -5200,7 +5200,7 @@ static int cyclades_proc_show(struct seq_file *m, void *v) (cur_jifs - info->idle_stats.recv_idle)/ HZ, info->idle_stats.overruns, /* FIXME: double check locking */ - (long)info->port.tty->ldisc.ops->num); + (long)info->port.tty->ldisc->ops->num); else seq_printf(m, "%3d %8lu %10lu %8lu " "%10lu %8lu %9lu %6ld\n", diff --git a/drivers/char/epca.c b/drivers/char/epca.c index 710ee9333057..abef1f7d84fe 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -2114,8 +2114,8 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file, tty_wait_until_sent(tty, 0); } else { /* ldisc lock already held in ioctl */ - if (tty->ldisc.ops->flush_buffer) - tty->ldisc.ops->flush_buffer(tty); + if (tty->ldisc->ops->flush_buffer) + tty->ldisc->ops->flush_buffer(tty); } unlock_kernel(); /* Fall Thru */ diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c index 0061e18aff60..0d10b89218ed 100644 --- a/drivers/char/ip2/i2lib.c +++ b/drivers/char/ip2/i2lib.c @@ -868,11 +868,11 @@ i2Input(i2ChanStrPtr pCh) amountToMove = count; } // Move the first block - pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY, + pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, &(pCh->Ibuf[stripIndex]), NULL, amountToMove ); // If we needed to wrap, do the second data move if (count > amountToMove) { - pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY, + pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY, pCh->Ibuf, NULL, count - amountToMove ); } // Bump and wrap the stripIndex all at once by the amount of data read. This diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index afd9247cf082..517271c762e6 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -1315,8 +1315,8 @@ static inline void isig(int sig, struct tty_struct *tty, int flush) if (tty->pgrp) kill_pgrp(tty->pgrp, sig, 1); if (flush || !L_NOFLSH(tty)) { - if ( tty->ldisc.ops->flush_buffer ) - tty->ldisc.ops->flush_buffer(tty); + if ( tty->ldisc->ops->flush_buffer ) + tty->ldisc->ops->flush_buffer(tty); i2InputFlush( tty->driver_data ); } } diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c index bacb3e2872ae..461ece591a5b 100644 --- a/drivers/char/n_hdlc.c +++ b/drivers/char/n_hdlc.c @@ -342,8 +342,8 @@ static int n_hdlc_tty_open (struct tty_struct *tty) #endif /* Flush any pending characters in the driver and discipline. */ - if (tty->ldisc.ops->flush_buffer) - tty->ldisc.ops->flush_buffer(tty); + if (tty->ldisc->ops->flush_buffer) + tty->ldisc->ops->flush_buffer(tty); tty_driver_flush_buffer(tty); diff --git a/drivers/char/pty.c b/drivers/char/pty.c index da2cb8c70c11..5acd29e6e043 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -110,7 +110,7 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, c = to->receive_room; if (c > count) c = count; - to->ldisc.ops->receive_buf(to, buf, NULL, c); + to->ldisc->ops->receive_buf(to, buf, NULL, c); return c; } @@ -148,11 +148,11 @@ static int pty_chars_in_buffer(struct tty_struct *tty) int count; /* We should get the line discipline lock for "tty->link" */ - if (!to || !to->ldisc.ops->chars_in_buffer) + if (!to || !to->ldisc->ops->chars_in_buffer) return 0; /* The ldisc must report 0 if no characters available to be read */ - count = to->ldisc.ops->chars_in_buffer(to); + count = to->ldisc->ops->chars_in_buffer(to); if (tty->driver->subtype == PTY_TYPE_SLAVE) return count; @@ -186,8 +186,8 @@ static void pty_flush_buffer(struct tty_struct *tty) if (!to) return; - if (to->ldisc.ops->flush_buffer) - to->ldisc.ops->flush_buffer(to); + if (to->ldisc->ops->flush_buffer) + to->ldisc->ops->flush_buffer(to); if (to->packet) { spin_lock_irqsave(&tty->ctrl_lock, flags); diff --git a/drivers/char/selection.c b/drivers/char/selection.c index cb8ca5698963..f97b9e848064 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -327,7 +327,7 @@ int paste_selection(struct tty_struct *tty) } count = sel_buffer_lth - pasted; count = min(count, tty->receive_room); - tty->ldisc.ops->receive_buf(tty, sel_buffer + pasted, + tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted, NULL, count); pasted += count; } diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index be49d0730bb9..2f44b0b241c3 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -491,22 +491,6 @@ void tty_ldisc_flush(struct tty_struct *tty) EXPORT_SYMBOL_GPL(tty_ldisc_flush); -/** - * tty_reset_termios - reset terminal state - * @tty: tty to reset - * - * Restore a terminal to the driver default state - */ - -static void tty_reset_termios(struct tty_struct *tty) -{ - mutex_lock(&tty->termios_mutex); - *tty->termios = tty->driver->init_termios; - tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios); - tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios); - mutex_unlock(&tty->termios_mutex); -} - /** * do_tty_hangup - actual handler for hangup events * @work: tty device @@ -536,7 +520,6 @@ static void do_tty_hangup(struct work_struct *work) struct file *cons_filp = NULL; struct file *filp, *f = NULL; struct task_struct *p; - struct tty_ldisc *ld; int closecount = 0, n; unsigned long flags; int refs = 0; @@ -567,40 +550,8 @@ static void do_tty_hangup(struct work_struct *work) filp->f_op = &hung_up_tty_fops; } file_list_unlock(); - /* - * FIXME! What are the locking issues here? This may me overdoing - * things... This question is especially important now that we've - * removed the irqlock. - */ - ld = tty_ldisc_ref(tty); - if (ld != NULL) { - /* We may have no line discipline at this point */ - if (ld->ops->flush_buffer) - ld->ops->flush_buffer(tty); - tty_driver_flush_buffer(tty); - if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) && - ld->ops->write_wakeup) - ld->ops->write_wakeup(tty); - if (ld->ops->hangup) - ld->ops->hangup(tty); - } - /* - * FIXME: Once we trust the LDISC code better we can wait here for - * ldisc completion and fix the driver call race - */ - wake_up_interruptible_poll(&tty->write_wait, POLLOUT); - wake_up_interruptible_poll(&tty->read_wait, POLLIN); - /* - * Shutdown the current line discipline, and reset it to - * N_TTY. - */ - if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) - tty_reset_termios(tty); - /* Defer ldisc switch */ - /* tty_deferred_ldisc_switch(N_TTY); - This should get done automatically when the port closes and - tty_release is called */ + tty_ldisc_hangup(tty); read_lock(&tasklist_lock); if (tty->session) { @@ -629,12 +580,15 @@ static void do_tty_hangup(struct work_struct *work) read_unlock(&tasklist_lock); spin_lock_irqsave(&tty->ctrl_lock, flags); - tty->flags = 0; + clear_bit(TTY_THROTTLED, &tty->flags); + clear_bit(TTY_PUSH, &tty->flags); + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); put_pid(tty->session); put_pid(tty->pgrp); tty->session = NULL; tty->pgrp = NULL; tty->ctrl_status = 0; + set_bit(TTY_HUPPED, &tty->flags); spin_unlock_irqrestore(&tty->ctrl_lock, flags); /* Account for the p->signal references we killed */ @@ -660,10 +614,7 @@ static void do_tty_hangup(struct work_struct *work) * can't yet guarantee all that. */ set_bit(TTY_HUPPED, &tty->flags); - if (ld) { - tty_ldisc_enable(tty); - tty_ldisc_deref(ld); - } + tty_ldisc_enable(tty); unlock_kernel(); if (f) fput(f); @@ -2570,7 +2521,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case TIOCGSID: return tiocgsid(tty, real_tty, p); case TIOCGETD: - return put_user(tty->ldisc.ops->num, (int __user *)p); + return put_user(tty->ldisc->ops->num, (int __user *)p); case TIOCSETD: return tiocsetd(tty, p); /* @@ -2785,6 +2736,7 @@ void initialize_tty_struct(struct tty_struct *tty, tty->buf.head = tty->buf.tail = NULL; tty_buffer_init(tty); mutex_init(&tty->termios_mutex); + mutex_init(&tty->ldisc_mutex); init_waitqueue_head(&tty->write_wait); init_waitqueue_head(&tty->read_wait); INIT_WORK(&tty->hangup_work, do_tty_hangup); diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index e3c6416aa86d..a58a19a6a5e1 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -115,19 +115,22 @@ EXPORT_SYMBOL(tty_unregister_ldisc); /** * tty_ldisc_try_get - try and reference an ldisc * @disc: ldisc number - * @ld: tty ldisc structure to complete * * Attempt to open and lock a line discipline into place. Return - * the line discipline refcounted and assigned in ld. On an error - * report the error code back + * the line discipline refcounted or an error. */ -static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld) +static struct tty_ldisc *tty_ldisc_try_get(int disc) { unsigned long flags; + struct tty_ldisc *ld; struct tty_ldisc_ops *ldops; int err = -EINVAL; + ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL); + if (ld == NULL) + return ERR_PTR(-ENOMEM); + spin_lock_irqsave(&tty_ldisc_lock, flags); ld->ops = NULL; ldops = tty_ldiscs[disc]; @@ -140,17 +143,19 @@ static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld) /* lock it */ ldops->refcount++; ld->ops = ldops; + ld->refcount = 0; err = 0; } } spin_unlock_irqrestore(&tty_ldisc_lock, flags); - return err; + if (err) + return ERR_PTR(err); + return ld; } /** * tty_ldisc_get - take a reference to an ldisc * @disc: ldisc number - * @ld: tty line discipline structure to use * * Takes a reference to a line discipline. Deals with refcounts and * module locking counts. Returns NULL if the discipline is not available. @@ -161,44 +166,46 @@ static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld) * takes tty_ldisc_lock to guard against ldisc races */ -static int tty_ldisc_get(int disc, struct tty_ldisc *ld) +static struct tty_ldisc *tty_ldisc_get(int disc) { - int err; + struct tty_ldisc *ld; if (disc < N_TTY || disc >= NR_LDISCS) - return -EINVAL; - err = tty_ldisc_try_get(disc, ld); - if (err < 0) { + return ERR_PTR(-EINVAL); + ld = tty_ldisc_try_get(disc); + if (IS_ERR(ld)) { request_module("tty-ldisc-%d", disc); - err = tty_ldisc_try_get(disc, ld); + ld = tty_ldisc_try_get(disc); } - return err; + return ld; } /** * tty_ldisc_put - drop ldisc reference - * @disc: ldisc number + * @ld: ldisc * * Drop a reference to a line discipline. Manage refcounts and - * module usage counts + * module usage counts. Free the ldisc once the recount hits zero. * * Locking: * takes tty_ldisc_lock to guard against ldisc races */ -static void tty_ldisc_put(struct tty_ldisc_ops *ld) +static void tty_ldisc_put(struct tty_ldisc *ld) { unsigned long flags; - int disc = ld->num; + int disc = ld->ops->num; + struct tty_ldisc_ops *ldo; BUG_ON(disc < N_TTY || disc >= NR_LDISCS); spin_lock_irqsave(&tty_ldisc_lock, flags); - ld = tty_ldiscs[disc]; - BUG_ON(ld->refcount == 0); - ld->refcount--; - module_put(ld->owner); + ldo = tty_ldiscs[disc]; + BUG_ON(ldo->refcount == 0); + ldo->refcount--; + module_put(ldo->owner); spin_unlock_irqrestore(&tty_ldisc_lock, flags); + kfree(ld); } static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos) @@ -219,12 +226,13 @@ static void tty_ldiscs_seq_stop(struct seq_file *m, void *v) static int tty_ldiscs_seq_show(struct seq_file *m, void *v) { int i = *(loff_t *)v; - struct tty_ldisc ld; + struct tty_ldisc *ld; - if (tty_ldisc_get(i, &ld) < 0) + ld = tty_ldisc_try_get(i); + if (IS_ERR(ld)) return 0; - seq_printf(m, "%-10s %2d\n", ld.ops->name ? ld.ops->name : "???", i); - tty_ldisc_put(ld.ops); + seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i); + tty_ldisc_put(ld); return 0; } @@ -263,8 +271,7 @@ const struct file_operations tty_ldiscs_proc_fops = { static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld) { - ld->refcount = 0; - tty->ldisc = *ld; + tty->ldisc = ld; } /** @@ -286,7 +293,7 @@ static int tty_ldisc_try(struct tty_struct *tty) int ret = 0; spin_lock_irqsave(&tty_ldisc_lock, flags); - ld = &tty->ldisc; + ld = tty->ldisc; if (test_bit(TTY_LDISC, &tty->flags)) { ld->refcount++; ret = 1; @@ -315,8 +322,8 @@ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) { /* wait_event is a macro */ wait_event(tty_ldisc_wait, tty_ldisc_try(tty)); - WARN_ON(tty->ldisc.refcount == 0); - return &tty->ldisc; + WARN_ON(tty->ldisc->refcount == 0); + return tty->ldisc; } EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); @@ -335,7 +342,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty) { if (tty_ldisc_try(tty)) - return &tty->ldisc; + return tty->ldisc; return NULL; } @@ -407,6 +414,39 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) mutex_unlock(&tty->termios_mutex); } +/** + * tty_ldisc_open - open a line discipline + * @tty: tty we are opening the ldisc on + * @ld: discipline to open + * + * A helper opening method. Also a convenient debugging and check + * point. + */ + +static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) +{ + WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags)); + if (ld->ops->open) + return ld->ops->open(tty); + return 0; +} + +/** + * tty_ldisc_close - close a line discipline + * @tty: tty we are opening the ldisc on + * @ld: discipline to close + * + * A helper close method. Also a convenient debugging and check + * point. + */ + +static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld) +{ + WARN_ON(!test_bit(TTY_LDISC_OPEN, &tty->flags)); + clear_bit(TTY_LDISC_OPEN, &tty->flags); + if (ld->ops->close) + ld->ops->close(tty); +} /** * tty_ldisc_restore - helper for tty ldisc change @@ -420,31 +460,32 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) { char buf[64]; - struct tty_ldisc new_ldisc; + struct tty_ldisc *new_ldisc; + int r; /* There is an outstanding reference here so this is safe */ - tty_ldisc_get(old->ops->num, old); + old = tty_ldisc_get(old->ops->num); + WARN_ON(IS_ERR(old)); tty_ldisc_assign(tty, old); tty_set_termios_ldisc(tty, old->ops->num); - if (old->ops->open && (old->ops->open(tty) < 0)) { - tty_ldisc_put(old->ops); + if (tty_ldisc_open(tty, old) < 0) { + tty_ldisc_put(old); /* This driver is always present */ - if (tty_ldisc_get(N_TTY, &new_ldisc) < 0) + new_ldisc =tty_ldisc_get(N_TTY); + if (IS_ERR(new_ldisc)) panic("n_tty: get"); - tty_ldisc_assign(tty, &new_ldisc); + tty_ldisc_assign(tty, new_ldisc); tty_set_termios_ldisc(tty, N_TTY); - if (new_ldisc.ops->open) { - int r = new_ldisc.ops->open(tty); - if (r < 0) - panic("Couldn't open N_TTY ldisc for " - "%s --- error %d.", - tty_name(tty, buf), r); - } + r = tty_ldisc_open(tty, new_ldisc); + if (r < 0) + panic("Couldn't open N_TTY ldisc for " + "%s --- error %d.", + tty_name(tty, buf), r); } } /** - * tty_ldisc_halt - shutdown the line discipline + * tty_ldisc_halt - shut down the line discipline * @tty: tty device * * Shut down the line discipline and work queue for this tty device. @@ -456,14 +497,10 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) * tty_ldisc_wait_idle. */ -static void tty_ldisc_halt(struct tty_struct *tty) +static int tty_ldisc_halt(struct tty_struct *tty) { clear_bit(TTY_LDISC, &tty->flags); - cancel_delayed_work(&tty->buf.work); - /* - * Wait for ->hangup_work and ->buf.work handlers to terminate - */ - flush_scheduled_work(); + return cancel_delayed_work(&tty->buf.work); } /** @@ -473,18 +510,22 @@ static void tty_ldisc_halt(struct tty_struct *tty) * Wait for the line discipline to become idle. The discipline must * have been halted for this to guarantee it remains idle. * + * tty_ldisc_lock protects the ref counts currently. */ -static void tty_ldisc_wait_idle(struct tty_struct *tty) +static int tty_ldisc_wait_idle(struct tty_struct *tty) { unsigned long flags; spin_lock_irqsave(&tty_ldisc_lock, flags); - while (tty->ldisc.refcount) { + while (tty->ldisc->refcount) { spin_unlock_irqrestore(&tty_ldisc_lock, flags); - wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0); + if (wait_event_timeout(tty_ldisc_wait, + tty->ldisc->refcount == 0, 5 * HZ) == 0) + return -EBUSY; spin_lock_irqsave(&tty_ldisc_lock, flags); } spin_unlock_irqrestore(&tty_ldisc_lock, flags); + return 0; } /** @@ -493,38 +534,63 @@ static void tty_ldisc_wait_idle(struct tty_struct *tty) * @ldisc: the line discipline * * Set the discipline of a tty line. Must be called from a process - * context. + * context. The ldisc change logic has to protect itself against any + * overlapping ldisc change (including on the other end of pty pairs), + * the close of one side of a tty/pty pair, and eventually hangup. * - * Locking: takes tty_ldisc_lock. - * called functions take termios_mutex + * Locking: takes tty_ldisc_lock, termios_mutex */ int tty_set_ldisc(struct tty_struct *tty, int ldisc) { int retval; - struct tty_ldisc o_ldisc, new_ldisc; - int work; - unsigned long flags; + struct tty_ldisc *o_ldisc, *new_ldisc; + int work, o_work = 0; struct tty_struct *o_tty; -restart: - /* This is a bit ugly for now but means we can break the 'ldisc - is part of the tty struct' assumption later */ - retval = tty_ldisc_get(ldisc, &new_ldisc); - if (retval) - return retval; + new_ldisc = tty_ldisc_get(ldisc); + if (IS_ERR(new_ldisc)) + return PTR_ERR(new_ldisc); /* - * Problem: What do we do if this blocks ? + * We need to look at the tty locking here for pty/tty pairs + * when both sides try to change in parallel. */ - tty_wait_until_sent(tty, 0); + o_tty = tty->link; /* o_tty is the pty side or NULL */ + - if (tty->ldisc.ops->num == ldisc) { - tty_ldisc_put(new_ldisc.ops); + /* + * Check the no-op case + */ + + if (tty->ldisc->ops->num == ldisc) { + tty_ldisc_put(new_ldisc); return 0; } + /* + * Problem: What do we do if this blocks ? + * We could deadlock here + */ + + tty_wait_until_sent(tty, 0); + + mutex_lock(&tty->ldisc_mutex); + + /* + * We could be midstream of another ldisc change which has + * dropped the lock during processing. If so we need to wait. + */ + + while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { + mutex_unlock(&tty->ldisc_mutex); + wait_event(tty_ldisc_wait, + test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0); + mutex_lock(&tty->ldisc_mutex); + } + set_bit(TTY_LDISC_CHANGING, &tty->flags); + /* * No more input please, we are switching. The new ldisc * will update this value in the ldisc open function @@ -533,8 +599,6 @@ restart: tty->receive_room = 0; o_ldisc = tty->ldisc; - o_tty = tty->link; - /* * Make sure we don't change while someone holds a * reference to the line discipline. The TTY_LDISC bit @@ -545,108 +609,181 @@ restart: * with a userspace app continually trying to use the tty in * parallel to the change and re-referencing the tty. */ - clear_bit(TTY_LDISC, &tty->flags); - if (o_tty) - clear_bit(TTY_LDISC, &o_tty->flags); - spin_lock_irqsave(&tty_ldisc_lock, flags); - if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) { - if (tty->ldisc.refcount) { - /* Free the new ldisc we grabbed. Must drop the lock - first. */ - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - tty_ldisc_put(o_ldisc.ops); - /* - * There are several reasons we may be busy, including - * random momentary I/O traffic. We must therefore - * retry. We could distinguish between blocking ops - * and retries if we made tty_ldisc_wait() smarter. - * That is up for discussion. - */ - if (wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0) - return -ERESTARTSYS; - goto restart; - } - if (o_tty && o_tty->ldisc.refcount) { - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - tty_ldisc_put(o_tty->ldisc.ops); - if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0) - return -ERESTARTSYS; - goto restart; - } - } - /* - * If the TTY_LDISC bit is set, then we are racing against - * another ldisc change - */ - if (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { - struct tty_ldisc *ld; - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - tty_ldisc_put(new_ldisc.ops); - ld = tty_ldisc_ref_wait(tty); - tty_ldisc_deref(ld); - goto restart; - } - /* - * This flag is used to avoid two parallel ldisc changes. Once - * open and close are fine grained locked this may work better - * as a mutex shared with the open/close/hup paths - */ - set_bit(TTY_LDISC_CHANGING, &tty->flags); + work = tty_ldisc_halt(tty); if (o_tty) - set_bit(TTY_LDISC_CHANGING, &o_tty->flags); - spin_unlock_irqrestore(&tty_ldisc_lock, flags); - - /* - * From this point on we know nobody has an ldisc - * usage reference, nor can they obtain one until - * we say so later on. - */ + o_work = tty_ldisc_halt(o_tty); - work = cancel_delayed_work(&tty->buf.work); /* - * Wait for ->hangup_work and ->buf.work handlers to terminate - * MUST NOT hold locks here. + * Wait for ->hangup_work and ->buf.work handlers to terminate. + * We must drop the mutex here in case a hangup is also in process. */ + + mutex_unlock(&tty->ldisc_mutex); + flush_scheduled_work(); + + /* Let any existing reference holders finish */ + retval = tty_ldisc_wait_idle(tty); + if (retval < 0) { + clear_bit(TTY_LDISC_CHANGING, &tty->flags); + tty_ldisc_put(new_ldisc); + return retval; + } + + mutex_lock(&tty->ldisc_mutex); + if (test_bit(TTY_HUPPED, &tty->flags)) { + /* We were raced by the hangup method. It will have stomped + the ldisc data and closed the ldisc down */ + clear_bit(TTY_LDISC_CHANGING, &tty->flags); + mutex_unlock(&tty->ldisc_mutex); + tty_ldisc_put(new_ldisc); + return -EIO; + } + /* Shutdown the current discipline. */ - if (o_ldisc.ops->close) - (o_ldisc.ops->close)(tty); + tty_ldisc_close(tty, o_ldisc); /* Now set up the new line discipline. */ - tty_ldisc_assign(tty, &new_ldisc); + tty_ldisc_assign(tty, new_ldisc); tty_set_termios_ldisc(tty, ldisc); - if (new_ldisc.ops->open) - retval = (new_ldisc.ops->open)(tty); + + retval = tty_ldisc_open(tty, new_ldisc); if (retval < 0) { - tty_ldisc_put(new_ldisc.ops); - tty_ldisc_restore(tty, &o_ldisc); + /* Back to the old one or N_TTY if we can't */ + tty_ldisc_put(new_ldisc); + tty_ldisc_restore(tty, o_ldisc); } + /* At this point we hold a reference to the new ldisc and a a reference to the old ldisc. If we ended up flipping back to the existing ldisc we have two references to it */ - if (tty->ldisc.ops->num != o_ldisc.ops->num && tty->ops->set_ldisc) + if (tty->ldisc->ops->num != o_ldisc->ops->num && tty->ops->set_ldisc) tty->ops->set_ldisc(tty); - tty_ldisc_put(o_ldisc.ops); + tty_ldisc_put(o_ldisc); /* - * Allow ldisc referencing to occur as soon as the driver - * ldisc callback completes. + * Allow ldisc referencing to occur again */ tty_ldisc_enable(tty); if (o_tty) tty_ldisc_enable(o_tty); - /* Restart it in case no characters kick it off. Safe if + /* Restart the work queue in case no characters kick it off. Safe if already running */ if (work) schedule_delayed_work(&tty->buf.work, 1); + if (o_work) + schedule_delayed_work(&o_tty->buf.work, 1); + mutex_unlock(&tty->ldisc_mutex); return retval; } +/** + * tty_reset_termios - reset terminal state + * @tty: tty to reset + * + * Restore a terminal to the driver default state. + */ + +static void tty_reset_termios(struct tty_struct *tty) +{ + mutex_lock(&tty->termios_mutex); + *tty->termios = tty->driver->init_termios; + tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios); + tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios); + mutex_unlock(&tty->termios_mutex); +} + + +/** + * tty_ldisc_reinit - reinitialise the tty ldisc + * @tty: tty to reinit + * + * Switch the tty back to N_TTY line discipline and leave the + * ldisc state closed + */ + +static void tty_ldisc_reinit(struct tty_struct *tty) +{ + struct tty_ldisc *ld; + + tty_ldisc_close(tty, tty->ldisc); + tty_ldisc_put(tty->ldisc); + tty->ldisc = NULL; + /* + * Switch the line discipline back + */ + ld = tty_ldisc_get(N_TTY); + BUG_ON(IS_ERR(ld)); + tty_ldisc_assign(tty, ld); + tty_set_termios_ldisc(tty, N_TTY); +} + +/** + * tty_ldisc_hangup - hangup ldisc reset + * @tty: tty being hung up + * + * Some tty devices reset their termios when they receive a hangup + * event. In that situation we must also switch back to N_TTY properly + * before we reset the termios data. + * + * Locking: We can take the ldisc mutex as the rest of the code is + * careful to allow for this. + * + * In the pty pair case this occurs in the close() path of the + * tty itself so we must be careful about locking rules. + */ + +void tty_ldisc_hangup(struct tty_struct *tty) +{ + struct tty_ldisc *ld; + + /* + * FIXME! What are the locking issues here? This may me overdoing + * things... This question is especially important now that we've + * removed the irqlock. + */ + ld = tty_ldisc_ref(tty); + if (ld != NULL) { + /* We may have no line discipline at this point */ + if (ld->ops->flush_buffer) + ld->ops->flush_buffer(tty); + tty_driver_flush_buffer(tty); + if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) && + ld->ops->write_wakeup) + ld->ops->write_wakeup(tty); + if (ld->ops->hangup) + ld->ops->hangup(tty); + tty_ldisc_deref(ld); + } + /* + * FIXME: Once we trust the LDISC code better we can wait here for + * ldisc completion and fix the driver call race + */ + wake_up_interruptible_poll(&tty->write_wait, POLLOUT); + wake_up_interruptible_poll(&tty->read_wait, POLLIN); + /* + * Shutdown the current line discipline, and reset it to + * N_TTY. + */ + if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) { + /* Avoid racing set_ldisc */ + mutex_lock(&tty->ldisc_mutex); + /* Switch back to N_TTY */ + tty_ldisc_reinit(tty); + /* At this point we have a closed ldisc and we want to + reopen it. We could defer this to the next open but + it means auditing a lot of other paths so this is a FIXME */ + WARN_ON(tty_ldisc_open(tty, tty->ldisc)); + tty_ldisc_enable(tty); + mutex_unlock(&tty->ldisc_mutex); + tty_reset_termios(tty); + } +} /** * tty_ldisc_setup - open line discipline @@ -654,24 +791,23 @@ restart: * @o_tty: pair tty for pty/tty pairs * * Called during the initial open of a tty/pty pair in order to set up the - * line discplines and bind them to the tty. + * line disciplines and bind them to the tty. This has no locking issues + * as the device isn't yet active. */ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) { - struct tty_ldisc *ld = &tty->ldisc; + struct tty_ldisc *ld = tty->ldisc; int retval; - if (ld->ops->open) { - retval = (ld->ops->open)(tty); - if (retval) - return retval; - } - if (o_tty && o_tty->ldisc.ops->open) { - retval = (o_tty->ldisc.ops->open)(o_tty); + retval = tty_ldisc_open(tty, ld); + if (retval) + return retval; + + if (o_tty) { + retval = tty_ldisc_open(o_tty, o_tty->ldisc); if (retval) { - if (ld->ops->close) - (ld->ops->close)(tty); + tty_ldisc_close(tty, ld); return retval; } tty_ldisc_enable(o_tty); @@ -679,34 +815,18 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_enable(tty); return 0; } - -static void tty_ldisc_reinit(struct tty_struct *tty) -{ - struct tty_ldisc ld; - - if (tty->ldisc.ops->close) - (tty->ldisc.ops->close)(tty); - tty_ldisc_put(tty->ldisc.ops); - /* - * Switch the line discipline back - */ - WARN_ON(tty_ldisc_get(N_TTY, &ld)); - tty_ldisc_assign(tty, &ld); - tty_set_termios_ldisc(tty, N_TTY); -} - /** * tty_ldisc_release - release line discipline * @tty: tty being shut down * @o_tty: pair tty for pty/tty pairs * * Called during the final close of a tty/pty pair in order to shut down the - * line discpline layer. + * line discpline layer. On exit the ldisc assigned is N_TTY and the + * ldisc has not been opened. */ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) { - /* * Prevent flush_to_ldisc() from rescheduling the work for later. Then * kill any delayed work. As this is the final close it does not @@ -714,6 +834,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) */ tty_ldisc_halt(tty); + flush_scheduled_work(); /* * Wait for any short term users (we know they are just driver @@ -730,11 +851,9 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) */ tty_ldisc_reinit(tty); - if (o_tty) { - /* FIXME: could o_tty be in setldisc here ? */ - clear_bit(TTY_LDISC, &o_tty->flags); - tty_ldisc_reinit(o_tty); - } + /* This will need doing differently if we need to lock */ + if (o_tty) + tty_ldisc_release(o_tty, NULL); } /** @@ -747,10 +866,10 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) void tty_ldisc_init(struct tty_struct *tty) { - struct tty_ldisc ld; - if (tty_ldisc_get(N_TTY, &ld) < 0) + struct tty_ldisc *ld = tty_ldisc_get(N_TTY); + if (IS_ERR(ld)) panic("n_tty: init_tty"); - tty_ldisc_assign(tty, &ld); + tty_ldisc_assign(tty, ld); } void tty_ldisc_begin(void) diff --git a/include/linux/tty.h b/include/linux/tty.h index f9c13c83790c..1488d8c81aac 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -226,8 +226,11 @@ struct tty_struct { struct tty_driver *driver; const struct tty_operations *ops; int index; - /* The ldisc objects are protected by tty_ldisc_lock at the moment */ - struct tty_ldisc ldisc; + + /* Protects ldisc changes: Lock tty not pty */ + struct mutex ldisc_mutex; + struct tty_ldisc *ldisc; + struct mutex termios_mutex; spinlock_t ctrl_lock; /* Termios values are protected by the termios mutex */ @@ -314,6 +317,7 @@ struct tty_struct { #define TTY_CLOSING 7 /* ->close() in progress */ #define TTY_LDISC 9 /* Line discipline attached */ #define TTY_LDISC_CHANGING 10 /* Line discipline changing */ +#define TTY_LDISC_OPEN 11 /* Line discipline is open */ #define TTY_HW_COOK_OUT 14 /* Hardware can do output cooking */ #define TTY_HW_COOK_IN 15 /* Hardware can do input cooking */ #define TTY_PTY_LOCK 16 /* pty private */ @@ -406,6 +410,7 @@ extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b); extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *); extern void tty_ldisc_deref(struct tty_ldisc *); extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *); +extern void tty_ldisc_hangup(struct tty_struct *tty); extern const struct file_operations tty_ldiscs_proc_fops; extern void tty_wakeup(struct tty_struct *tty); -- cgit v1.2.2 From f2c4c65c8350d885d74dcdea7061dcecc1223c36 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:50:58 +0100 Subject: tty: Move ldisc_flush We have a tty_ldisc file now so put tty_ldisc_flush in the right place Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 21 --------------------- drivers/char/tty_ldisc.c | 21 +++++++++++++++++++++ 2 files changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 2f44b0b241c3..939e198d7670 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -470,27 +470,6 @@ void tty_wakeup(struct tty_struct *tty) EXPORT_SYMBOL_GPL(tty_wakeup); -/** - * tty_ldisc_flush - flush line discipline queue - * @tty: tty - * - * Flush the line discipline queue (if any) for this tty. If there - * is no line discipline active this is a no-op. - */ - -void tty_ldisc_flush(struct tty_struct *tty) -{ - struct tty_ldisc *ld = tty_ldisc_ref(tty); - if (ld) { - if (ld->ops->flush_buffer) - ld->ops->flush_buffer(tty); - tty_ldisc_deref(ld); - } - tty_buffer_flush(tty); -} - -EXPORT_SYMBOL_GPL(tty_ldisc_flush); - /** * do_tty_hangup - actual handler for hangup events * @work: tty device diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index a58a19a6a5e1..01c70c01f64a 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -395,6 +395,27 @@ void tty_ldisc_enable(struct tty_struct *tty) wake_up(&tty_ldisc_wait); } +/** + * tty_ldisc_flush - flush line discipline queue + * @tty: tty + * + * Flush the line discipline queue (if any) for this tty. If there + * is no line discipline active this is a no-op. + */ + +void tty_ldisc_flush(struct tty_struct *tty) +{ + struct tty_ldisc *ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->flush_buffer) + ld->ops->flush_buffer(tty); + tty_ldisc_deref(ld); + } + tty_buffer_flush(tty); +} + +EXPORT_SYMBOL_GPL(tty_ldisc_flush); + /** * tty_set_termios_ldisc - set ldisc field * @tty: tty structure -- cgit v1.2.2 From 852e99d22f2231d232c45216b027565e3bae7add Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 12:51:41 +0100 Subject: tty: bring ldisc into CodingStyle Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ldisc.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 01c70c01f64a..39c8f86dedd4 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -126,7 +126,7 @@ static struct tty_ldisc *tty_ldisc_try_get(int disc) struct tty_ldisc *ld; struct tty_ldisc_ops *ldops; int err = -EINVAL; - + ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL); if (ld == NULL) return ERR_PTR(-ENOMEM); @@ -208,12 +208,12 @@ static void tty_ldisc_put(struct tty_ldisc *ld) kfree(ld); } -static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos) +static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos) { return (*pos < NR_LDISCS) ? pos : NULL; } -static void * tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos) +static void *tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos) { (*pos)++; return (*pos < NR_LDISCS) ? pos : NULL; @@ -227,7 +227,7 @@ static int tty_ldiscs_seq_show(struct seq_file *m, void *v) { int i = *(loff_t *)v; struct tty_ldisc *ld; - + ld = tty_ldisc_try_get(i); if (IS_ERR(ld)) return 0; @@ -325,7 +325,6 @@ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty) WARN_ON(tty->ldisc->refcount == 0); return tty->ldisc; } - EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait); /** @@ -345,7 +344,6 @@ struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty) return tty->ldisc; return NULL; } - EXPORT_SYMBOL_GPL(tty_ldisc_ref); /** @@ -373,7 +371,6 @@ void tty_ldisc_deref(struct tty_ldisc *ld) wake_up(&tty_ldisc_wait); spin_unlock_irqrestore(&tty_ldisc_lock, flags); } - EXPORT_SYMBOL_GPL(tty_ldisc_deref); /** @@ -413,7 +410,6 @@ void tty_ldisc_flush(struct tty_struct *tty) } tty_buffer_flush(tty); } - EXPORT_SYMBOL_GPL(tty_ldisc_flush); /** @@ -492,7 +488,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) if (tty_ldisc_open(tty, old) < 0) { tty_ldisc_put(old); /* This driver is always present */ - new_ldisc =tty_ldisc_get(N_TTY); + new_ldisc = tty_ldisc_get(N_TTY); if (IS_ERR(new_ldisc)) panic("n_tty: get"); tty_ldisc_assign(tty, new_ldisc); @@ -514,7 +510,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) * be obtained while the delayed work queue halt ensures that no more * data is fed to the ldisc. * - * In order to wait for any existing references to complete see + * In order to wait for any existing references to complete see * tty_ldisc_wait_idle. */ @@ -611,7 +607,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) mutex_lock(&tty->ldisc_mutex); } set_bit(TTY_LDISC_CHANGING, &tty->flags); - + /* * No more input please, we are switching. The new ldisc * will update this value in the ldisc open function @@ -841,8 +837,8 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) * @tty: tty being shut down * @o_tty: pair tty for pty/tty pairs * - * Called during the final close of a tty/pty pair in order to shut down the - * line discpline layer. On exit the ldisc assigned is N_TTY and the + * Called during the final close of a tty/pty pair in order to shut down + * the line discpline layer. On exit the ldisc assigned is N_TTY and the * ldisc has not been opened. */ -- cgit v1.2.2 From 5fcf62b0f1f24ee25931636216f28bc87448a60f Mon Sep 17 00:00:00 2001 From: Olivier Bornet Date: Thu, 11 Jun 2009 12:52:26 +0100 Subject: tty: iuu_phoenix: fix locking. Bring in the relevant bits of the 0.9 vendor driver. Signed-off-by: Olivier Bornet Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/iuu_phoenix.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index bb572cee6ecd..637d0ddbfb42 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -650,32 +650,33 @@ static int iuu_bulk_write(struct usb_serial_port *port) unsigned long flags; int result; int i; + int buf_len; char *buf_ptr = port->write_urb->transfer_buffer; dbg("%s - enter", __func__); + spin_lock_irqsave(&priv->lock, flags); *buf_ptr++ = IUU_UART_ESC; *buf_ptr++ = IUU_UART_TX; *buf_ptr++ = priv->writelen; - memcpy(buf_ptr, priv->writebuf, - priv->writelen); + memcpy(buf_ptr, priv->writebuf, priv->writelen); + buf_len = priv->writelen; + priv->writelen = 0; + spin_unlock_irqrestore(&priv->lock, flags); if (debug == 1) { - for (i = 0; i < priv->writelen; i++) + for (i = 0; i < buf_len; i++) sprintf(priv->dbgbuf + i*2 , "%02X", priv->writebuf[i]); - priv->dbgbuf[priv->writelen+i*2] = 0; + priv->dbgbuf[buf_len+i*2] = 0; dbg("%s - writing %i chars : %s", __func__, - priv->writelen, priv->dbgbuf); + buf_len, priv->dbgbuf); } usb_fill_bulk_urb(port->write_urb, port->serial->dev, usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress), - port->write_urb->transfer_buffer, priv->writelen + 3, + port->write_urb->transfer_buffer, buf_len + 3, iuu_rxcmd, port); result = usb_submit_urb(port->write_urb, GFP_ATOMIC); - spin_lock_irqsave(&priv->lock, flags); - priv->writelen = 0; - spin_unlock_irqrestore(&priv->lock, flags); usb_serial_port_softint(port); return result; } @@ -769,14 +770,10 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port, return -ENOMEM; spin_lock_irqsave(&priv->lock, flags); - if (priv->writelen > 0) { - /* buffer already filled but not commited */ - spin_unlock_irqrestore(&priv->lock, flags); - return 0; - } + /* fill the buffer */ - memcpy(priv->writebuf, buf, count); - priv->writelen = count; + memcpy(priv->writebuf + priv->writelen, buf, count); + priv->writelen += count; spin_unlock_irqrestore(&priv->lock, flags); return count; -- cgit v1.2.2 From cc3447d179d8a5e16807e52b77d7f4c095ffedb7 Mon Sep 17 00:00:00 2001 From: Olivier Bornet Date: Thu, 11 Jun 2009 12:53:24 +0100 Subject: tty: iuu_phoenix: Fix stopbit when uart goes on. Signed-off-by: Olivier Bornet Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/iuu_phoenix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 637d0ddbfb42..ef6d12fd579c 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -815,7 +815,7 @@ static int iuu_uart_on(struct usb_serial_port *port) buf[0] = IUU_UART_ENABLE; buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF); buf[2] = (u8) (0x00FF & IUU_BAUD_9600); - buf[3] = (u8) (0x0F0 & IUU_TWO_STOP_BITS) | (0x07 & IUU_PARITY_EVEN); + buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN); status = bulk_immediate(port, buf, 4); if (status != IUU_OPERATION_OK) { -- cgit v1.2.2 From 96dab77ebf3868cc8723ac95e048e8a9c1dccf22 Mon Sep 17 00:00:00 2001 From: Olivier Bornet Date: Thu, 11 Jun 2009 12:54:20 +0100 Subject: tty: iuu_phoenix: set termios. set_termios can now be used for setting the parity and the stopbits. This is needed to use with cards which use a different parity then the parity used at start (even). If the iuu_uart_baud function return an error, we will return the old_termios instead of the new one. Signed-off-by: Olivier Bornet This was then revamped to use the various helpers, not copy non-hardware bits any to add mark/space parity and csize reporting Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/iuu_phoenix.c | 50 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index ef6d12fd579c..fa86f6e7415f 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -942,6 +942,55 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud, return status; } +static void iuu_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + const u32 supported_mask = CMSPAR|PARENB|PARODD; + + unsigned int cflag = tty->termios->c_cflag; + int status; + u32 actual; + u32 parity; + int csize = CS7; + int baud = 9600; /* Fixed for the moment */ + u32 newval = cflag & supported_mask; + + /* compute the parity parameter */ + parity = 0; + if (cflag & CMSPAR) { /* Using mark space */ + if (cflag & PARODD) + parity |= IUU_PARITY_SPACE; + else + parity |= IUU_PARITY_MARK; + } else if (!(cflag & PARENB)) { + parity |= IUU_PARITY_NONE; + csize = CS8; + } else if (cflag & PARODD) + parity |= IUU_PARITY_ODD; + else + parity |= IUU_PARITY_EVEN; + + parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT); + + /* set it */ + status = iuu_uart_baud(port, + (clockmode == 2) ? 16457 : 9600 * boost / 100, + &actual, parity); + + /* set the termios value to the real one, so the user now what has + * changed. We support few fields so its easies to copy the old hw + * settings back over and then adjust them + */ + if (old_termios) + tty_termios_copy_hw(tty->termios, old_termios); + if (status != 0) /* Set failed - return old bits */ + return; + /* Re-encode speed, parity and csize */ + tty_encode_baud_rate(tty, baud, baud); + tty->termios->c_cflag &= ~(supported_mask|CSIZE); + tty->termios->c_cflag |= newval | csize; +} + static void iuu_close(struct usb_serial_port *port) { /* iuu_led (port,255,0,0,0); */ @@ -1151,6 +1200,7 @@ static struct usb_serial_driver iuu_device = { .read_bulk_callback = iuu_uart_read_callback, .tiocmget = iuu_tiocmget, .tiocmset = iuu_tiocmset, + .set_termios = iuu_set_termios, .attach = iuu_startup, .shutdown = iuu_shutdown, }; -- cgit v1.2.2 From 9bb41699ad5c74519dc054bfe469a8074799c863 Mon Sep 17 00:00:00 2001 From: Olivier Bornet Date: Thu, 11 Jun 2009 12:55:01 +0100 Subject: tty: iuu_phoenix: update version number. Signed-off-by: Olivier Bornet Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/iuu_phoenix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index fa86f6e7415f..76a3cc327bb9 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -40,7 +40,7 @@ static int debug; /* * Version Information */ -#define DRIVER_VERSION "v0.5" +#define DRIVER_VERSION "v0.10" #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" static struct usb_device_id id_table[] = { -- cgit v1.2.2 From 13858d36903990441a89eb342247b71436808eeb Mon Sep 17 00:00:00 2001 From: "Alexander Y. Fomichev" Date: Thu, 11 Jun 2009 12:56:00 +0100 Subject: jsm: correctly support multiple 4/8-port boards If there are more then one 4/8-port board jsm_uart_port_init allocate a line numbers of the second and further boards from range of previous one. This patch fixed the problem. Signed-off-by: Alexander Y. Fomichev [printks fixed to add jsm: ] Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/jsm/jsm.h | 1 + drivers/serial/jsm/jsm_tty.c | 14 ++++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index c0a3e2734e24..4e5f3bde0461 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -61,6 +61,7 @@ enum { if ((DBG_##nlevel & jsm_debug)) \ dev_printk(KERN_##klevel, pdev->dev, fmt, ## args) +#define MAXLINES 256 #define MAXPORTS 8 #define MAX_STOPS_SENT 5 diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 31496dc0a0d1..107ce2e187b8 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -33,6 +33,8 @@ #include "jsm.h" +static DECLARE_BITMAP(linemap, MAXLINES); + static void jsm_carrier(struct jsm_channel *ch); static inline int jsm_get_mstat(struct jsm_channel *ch) @@ -433,6 +435,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd) int __devinit jsm_uart_port_init(struct jsm_board *brd) { int i; + unsigned int line; struct jsm_channel *ch; if (!brd) @@ -459,9 +462,15 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd) brd->channels[i]->uart_port.membase = brd->re_map_membase; brd->channels[i]->uart_port.fifosize = 16; brd->channels[i]->uart_port.ops = &jsm_ops; - brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2; + line = find_first_zero_bit(linemap, MAXLINES); + if (line >= MAXLINES) { + printk(KERN_INFO "jsm: linemap is full, added device failed\n"); + continue; + } else + set_bit((int)line, linemap); + brd->channels[i]->uart_port.line = line; if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port)) - printk(KERN_INFO "Added device failed\n"); + printk(KERN_INFO "jsm: add device failed\n"); else printk(KERN_INFO "Added device \n"); } @@ -494,6 +503,7 @@ int jsm_remove_uart_port(struct jsm_board *brd) ch = brd->channels[i]; + clear_bit((int)(ch->uart_port.line), linemap); uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port); } -- cgit v1.2.2 From aba6593bf77371e71331ba76dacc98b47760cba3 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Thu, 11 Jun 2009 13:02:59 +0100 Subject: icom: fixing a if clause spaghetti adapter->version can only be ADAPTER_V2 or ADAPTER_V1. So, that OR operand in the "if" clause is non-sense and can be removed. Signed-off-by: Breno Leitao Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/icom.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index a461b3b2c72d..fd5fd23804bc 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -408,7 +408,7 @@ static void load_code(struct icom_port *icom_port) release_firmware(fw); /* Set Hardware level */ - if ((icom_port->adapter->version | ADAPTER_V2) == ADAPTER_V2) + if (icom_port->adapter->version == ADAPTER_V2) writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); /* Start the processor in Adapter */ @@ -861,7 +861,7 @@ static irqreturn_t icom_interrupt(int irq, void *dev_id) /* find icom_port for this interrupt */ icom_adapter = (struct icom_adapter *) dev_id; - if ((icom_adapter->version | ADAPTER_V2) == ADAPTER_V2) { + if (icom_adapter->version == ADAPTER_V2) { int_reg = icom_adapter->base_addr + 0x8024; adapter_interrupts = readl(int_reg); -- cgit v1.2.2 From c481c707fe4b07783d9a2499a9bbbb94497e9b18 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:04:27 +0100 Subject: tty: remove buffer special casing Long long ago a 4K kmalloc allocated two pages so the tty layer used the page allocator, except on some machines where the page size was huge. This was removed from the core tty layer with the tty buffer re-implementation but not from tty_audit or the n_tty ldisc. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/n_tty.c | 11 ++--------- drivers/char/tty_audit.c | 10 ++-------- 2 files changed, 4 insertions(+), 17 deletions(-) diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index f6f0e4ec2b51..b4b12b4f0ac4 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -76,19 +76,12 @@ static inline unsigned char *alloc_buf(void) { gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; - - if (PAGE_SIZE != N_TTY_BUF_SIZE) - return kmalloc(N_TTY_BUF_SIZE, prio); - else - return (unsigned char *)__get_free_page(prio); + return kmalloc(N_TTY_BUF_SIZE, prio); } static inline void free_buf(unsigned char *buf) { - if (PAGE_SIZE != N_TTY_BUF_SIZE) - kfree(buf); - else - free_page((unsigned long) buf); + kfree(buf); } static inline int tty_put_user(struct tty_struct *tty, unsigned char x, diff --git a/drivers/char/tty_audit.c b/drivers/char/tty_audit.c index 55ba6f142883..ac16fbec72d0 100644 --- a/drivers/char/tty_audit.c +++ b/drivers/char/tty_audit.c @@ -29,10 +29,7 @@ static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor, buf = kmalloc(sizeof(*buf), GFP_KERNEL); if (!buf) goto err; - if (PAGE_SIZE != N_TTY_BUF_SIZE) - buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL); - else - buf->data = (unsigned char *)__get_free_page(GFP_KERNEL); + buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL); if (!buf->data) goto err_buf; atomic_set(&buf->count, 1); @@ -52,10 +49,7 @@ err: static void tty_audit_buf_free(struct tty_audit_buf *buf) { WARN_ON(buf->valid != 0); - if (PAGE_SIZE != N_TTY_BUF_SIZE) - kfree(buf->data); - else - free_page((unsigned long)buf->data); + kfree(buf->data); kfree(buf); } -- cgit v1.2.2 From 0b4068a1287b02018d1b3159e7be6f27f3e3e68c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:05:49 +0100 Subject: tty: simplify buffer allocator cleanups Having cleaned up the allocators we might as well remove the inline helpers for some of it Signed-off-by: Alan Cox --- drivers/char/n_tty.c | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-) diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c index b4b12b4f0ac4..94a5d5020abc 100644 --- a/drivers/char/n_tty.c +++ b/drivers/char/n_tty.c @@ -73,17 +73,6 @@ #define ECHO_OP_SET_CANON_COL 0x81 #define ECHO_OP_ERASE_TAB 0x82 -static inline unsigned char *alloc_buf(void) -{ - gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; - return kmalloc(N_TTY_BUF_SIZE, prio); -} - -static inline void free_buf(unsigned char *buf) -{ - kfree(buf); -} - static inline int tty_put_user(struct tty_struct *tty, unsigned char x, unsigned char __user *ptr) { @@ -1551,11 +1540,11 @@ static void n_tty_close(struct tty_struct *tty) { n_tty_flush_buffer(tty); if (tty->read_buf) { - free_buf(tty->read_buf); + kfree(tty->read_buf); tty->read_buf = NULL; } if (tty->echo_buf) { - free_buf(tty->echo_buf); + kfree(tty->echo_buf); tty->echo_buf = NULL; } } @@ -1577,17 +1566,16 @@ static int n_tty_open(struct tty_struct *tty) /* These are ugly. Currently a malloc failure here can panic */ if (!tty->read_buf) { - tty->read_buf = alloc_buf(); + tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); if (!tty->read_buf) return -ENOMEM; } if (!tty->echo_buf) { - tty->echo_buf = alloc_buf(); + tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); + if (!tty->echo_buf) return -ENOMEM; } - memset(tty->read_buf, 0, N_TTY_BUF_SIZE); - memset(tty->echo_buf, 0, N_TTY_BUF_SIZE); reset_buffer_flags(tty); tty->column = 0; n_tty_set_termios(tty, NULL); -- cgit v1.2.2 From 73e0d48b8c28fb39a0bb6713c875e9919a9af546 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 11 Jun 2009 13:06:31 +0100 Subject: parport_pc: Fix subscription bugs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes array subscription bugs in the parport_pc driver. drivers/parport/parport_pc.c: In function ‘parport_irq_probe’: drivers/parport/parport_pc.c:1589: warning: array subscript is above array bounds drivers/parport/parport_pc.c: In function ‘parport_pc_probe_port’: drivers/parport/parport_pc.c:1579: warning: array subscript is above array bounds The patch also fixes a few other array bugs, which the compiler was unable to find. Coding style violations are also fixed. Signed-off-by: Michael Buesch Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/parport/parport_pc.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 4e63cc9e2778..24984c4a1ba4 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -1246,17 +1246,17 @@ static void __devinit show_parconfig_smsc37c669(int io, int key) (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03], (cr4 & 0x40) ? "1.7" : "1.9"); } - + /* Heuristics ! BIOS setup for this mainboard device limits the choices to standard settings, i.e. io-address and IRQ are related, however DMA can be 1 or 3, assume DMA_A=DMA1, DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */ - if(cr23*4 >=0x100) { /* if active */ - while((superios[i].io!= 0) && (i= 0x100) { /* if active */ + while ((i < NR_SUPERIOS) && (superios[i].io != 0)) i++; - if(i==NR_SUPERIOS) + if (i == NR_SUPERIOS) { printk(KERN_INFO "Super-IO: too many chips!\n"); - else { + } else { int d; switch (cr23*4) { case 0x3bc: @@ -1332,12 +1332,12 @@ static void __devinit show_parconfig_winbond(int io, int key) printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]); } - if(cr30 & 0x01) { /* the settings can be interrogated later ... */ - while((superios[i].io!= 0) && (i 3) ? @@ -1575,24 +1575,26 @@ static void __devinit detect_and_report_it87(void) static int get_superio_dma (struct parport *p) { - int i=0; - while( (superios[i].io != p->base) && (ibase)) i++; - if (i!=NR_SUPERIOS) + if (i != NR_SUPERIOS) return superios[i].dma; return PARPORT_DMA_NONE; } static int get_superio_irq (struct parport *p) { - int i=0; - while( (superios[i].io != p->base) && (ibase)) i++; - if (i!=NR_SUPERIOS) + if (i != NR_SUPERIOS) return superios[i].irq; return PARPORT_IRQ_NONE; } - + /* --- Mode detection ------------------------------------- */ -- cgit v1.2.2 From 3aeda9bc95d064308a70664e6f4a158c96cc1918 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:07:29 +0100 Subject: parport_pc: Coding style Michael's patch fixed some of the coding style so the style is now inconsistent. Sort the rest out Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/parport/parport_pc.c | 1746 ++++++++++++++++++++++-------------------- 1 file changed, 916 insertions(+), 830 deletions(-) diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 24984c4a1ba4..edf83e945853 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -1,5 +1,5 @@ /* Low-level parallel-port routines for 8255-based PC-style hardware. - * + * * Authors: Phil Blundell * Tim Waugh * Jose Renau @@ -11,7 +11,7 @@ * Cleaned up include files - Russell King * DMA support - Bert De Jonghe * Many ECP bugs fixed. Fred Barnes & Jamie Lokier, 1999 - * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G. + * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G. * Various hacks, Fred Barnes, 04/2001 * Updated probing logic - Adam Belay */ @@ -56,10 +56,10 @@ #include #include #include +#include +#include -#include #include -#include #include #include @@ -82,7 +82,7 @@ #define ECR_TST 06 #define ECR_CNF 07 #define ECR_MODE_MASK 0xe0 -#define ECR_WRITE(p,v) frob_econtrol((p),0xff,(v)) +#define ECR_WRITE(p, v) frob_econtrol((p), 0xff, (v)) #undef DEBUG @@ -109,27 +109,27 @@ static int pci_registered_parport; static int pnp_registered_parport; /* frob_control, but for ECR */ -static void frob_econtrol (struct parport *pb, unsigned char m, +static void frob_econtrol(struct parport *pb, unsigned char m, unsigned char v) { unsigned char ectr = 0; if (m != 0xff) - ectr = inb (ECONTROL (pb)); + ectr = inb(ECONTROL(pb)); - DPRINTK (KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n", + DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n", m, v, ectr, (ectr & ~m) ^ v); - outb ((ectr & ~m) ^ v, ECONTROL (pb)); + outb((ectr & ~m) ^ v, ECONTROL(pb)); } -static __inline__ void frob_set_mode (struct parport *p, int mode) +static inline void frob_set_mode(struct parport *p, int mode) { - frob_econtrol (p, ECR_MODE_MASK, mode << 5); + frob_econtrol(p, ECR_MODE_MASK, mode << 5); } #ifdef CONFIG_PARPORT_PC_FIFO -/* Safely change the mode bits in the ECR +/* Safely change the mode bits in the ECR Returns: 0 : Success -EBUSY: Could not drain FIFO in some finite amount of time, @@ -141,17 +141,18 @@ static int change_mode(struct parport *p, int m) unsigned char oecr; int mode; - DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n",m); + DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n", m); if (!priv->ecr) { - printk (KERN_DEBUG "change_mode: but there's no ECR!\n"); + printk(KERN_DEBUG "change_mode: but there's no ECR!\n"); return 0; } /* Bits <7:5> contain the mode. */ - oecr = inb (ECONTROL (p)); + oecr = inb(ECONTROL(p)); mode = (oecr >> 5) & 0x7; - if (mode == m) return 0; + if (mode == m) + return 0; if (mode >= 2 && !(priv->ctr & 0x20)) { /* This mode resets the FIFO, so we may @@ -163,19 +164,21 @@ static int change_mode(struct parport *p, int m) case ECR_ECP: /* ECP Parallel Port mode */ /* Busy wait for 200us */ for (counter = 0; counter < 40; counter++) { - if (inb (ECONTROL (p)) & 0x01) + if (inb(ECONTROL(p)) & 0x01) break; - if (signal_pending (current)) break; - udelay (5); + if (signal_pending(current)) + break; + udelay(5); } /* Poll slowly. */ - while (!(inb (ECONTROL (p)) & 0x01)) { - if (time_after_eq (jiffies, expire)) + while (!(inb(ECONTROL(p)) & 0x01)) { + if (time_after_eq(jiffies, expire)) /* The FIFO is stuck. */ return -EBUSY; - schedule_timeout_interruptible(msecs_to_jiffies(10)); - if (signal_pending (current)) + schedule_timeout_interruptible( + msecs_to_jiffies(10)); + if (signal_pending(current)) break; } } @@ -185,20 +188,20 @@ static int change_mode(struct parport *p, int m) /* We have to go through mode 001 */ oecr &= ~(7 << 5); oecr |= ECR_PS2 << 5; - ECR_WRITE (p, oecr); + ECR_WRITE(p, oecr); } /* Set the mode. */ oecr &= ~(7 << 5); oecr |= m << 5; - ECR_WRITE (p, oecr); + ECR_WRITE(p, oecr); return 0; } #ifdef CONFIG_PARPORT_1284 /* Find FIFO lossage; FIFO is reset */ #if 0 -static int get_fifo_residue (struct parport *p) +static int get_fifo_residue(struct parport *p) { int residue; int cnfga; @@ -206,26 +209,26 @@ static int get_fifo_residue (struct parport *p) /* Adjust for the contents of the FIFO. */ for (residue = priv->fifo_depth; ; residue--) { - if (inb (ECONTROL (p)) & 0x2) + if (inb(ECONTROL(p)) & 0x2) /* Full up. */ break; - outb (0, FIFO (p)); + outb(0, FIFO(p)); } - printk (KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name, + printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name, residue); /* Reset the FIFO. */ - frob_set_mode (p, ECR_PS2); + frob_set_mode(p, ECR_PS2); /* Now change to config mode and clean up. FIXME */ - frob_set_mode (p, ECR_CNF); - cnfga = inb (CONFIGA (p)); - printk (KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga); + frob_set_mode(p, ECR_CNF); + cnfga = inb(CONFIGA(p)); + printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga); if (!(cnfga & (1<<2))) { - printk (KERN_DEBUG "%s: Accounting for extra byte\n", p->name); + printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name); residue++; } @@ -233,9 +236,11 @@ static int get_fifo_residue (struct parport *p) * PWord != 1 byte. */ /* Back to PS2 mode. */ - frob_set_mode (p, ECR_PS2); + frob_set_mode(p, ECR_PS2); - DPRINTK (KERN_DEBUG "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", inb (ECONTROL (p))); + DPRINTK(KERN_DEBUG + "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n", + inb(ECONTROL(p))); return residue; } #endif /* 0 */ @@ -257,8 +262,8 @@ static int clear_epp_timeout(struct parport *pb) /* To clear timeout some chips require double read */ parport_pc_read_status(pb); r = parport_pc_read_status(pb); - outb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */ - outb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */ + outb(r | 0x01, STATUS(pb)); /* Some reset by writing 1 */ + outb(r & 0xfe, STATUS(pb)); /* Others by writing 0 */ r = parport_pc_read_status(pb); return !(r & 0x01); @@ -272,7 +277,8 @@ static int clear_epp_timeout(struct parport *pb) * of these are in parport_pc.h. */ -static void parport_pc_init_state(struct pardevice *dev, struct parport_state *s) +static void parport_pc_init_state(struct pardevice *dev, + struct parport_state *s) { s->u.pc.ctr = 0xc; if (dev->irq_func && @@ -289,22 +295,23 @@ static void parport_pc_save_state(struct parport *p, struct parport_state *s) const struct parport_pc_private *priv = p->physport->private_data; s->u.pc.ctr = priv->ctr; if (priv->ecr) - s->u.pc.ecr = inb (ECONTROL (p)); + s->u.pc.ecr = inb(ECONTROL(p)); } -static void parport_pc_restore_state(struct parport *p, struct parport_state *s) +static void parport_pc_restore_state(struct parport *p, + struct parport_state *s) { struct parport_pc_private *priv = p->physport->private_data; register unsigned char c = s->u.pc.ctr & priv->ctr_writable; - outb (c, CONTROL (p)); + outb(c, CONTROL(p)); priv->ctr = c; if (priv->ecr) - ECR_WRITE (p, s->u.pc.ecr); + ECR_WRITE(p, s->u.pc.ecr); } #ifdef CONFIG_PARPORT_1284 -static size_t parport_pc_epp_read_data (struct parport *port, void *buf, - size_t length, int flags) +static size_t parport_pc_epp_read_data(struct parport *port, void *buf, + size_t length, int flags) { size_t got = 0; @@ -316,54 +323,52 @@ static size_t parport_pc_epp_read_data (struct parport *port, void *buf, * nFault is 0 if there is at least 1 byte in the Warp's FIFO * pError is 1 if there are 16 bytes in the Warp's FIFO */ - status = inb (STATUS (port)); + status = inb(STATUS(port)); - while (!(status & 0x08) && (got < length)) { - if ((left >= 16) && (status & 0x20) && !(status & 0x08)) { + while (!(status & 0x08) && got < length) { + if (left >= 16 && (status & 0x20) && !(status & 0x08)) { /* can grab 16 bytes from warp fifo */ - if (!((long)buf & 0x03)) { - insl (EPPDATA (port), buf, 4); - } else { - insb (EPPDATA (port), buf, 16); - } + if (!((long)buf & 0x03)) + insl(EPPDATA(port), buf, 4); + else + insb(EPPDATA(port), buf, 16); buf += 16; got += 16; left -= 16; } else { /* grab single byte from the warp fifo */ - *((char *)buf) = inb (EPPDATA (port)); + *((char *)buf) = inb(EPPDATA(port)); buf++; got++; left--; } - status = inb (STATUS (port)); + status = inb(STATUS(port)); if (status & 0x01) { /* EPP timeout should never occur... */ - printk (KERN_DEBUG "%s: EPP timeout occurred while talking to " - "w91284pic (should not have done)\n", port->name); - clear_epp_timeout (port); + printk(KERN_DEBUG +"%s: EPP timeout occurred while talking to w91284pic (should not have done)\n", port->name); + clear_epp_timeout(port); } } return got; } if ((flags & PARPORT_EPP_FAST) && (length > 1)) { - if (!(((long)buf | length) & 0x03)) { - insl (EPPDATA (port), buf, (length >> 2)); - } else { - insb (EPPDATA (port), buf, length); - } - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + if (!(((long)buf | length) & 0x03)) + insl(EPPDATA(port), buf, (length >> 2)); + else + insb(EPPDATA(port), buf, length); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); return -EIO; } return length; } for (; got < length; got++) { - *((char*)buf) = inb (EPPDATA(port)); + *((char *)buf) = inb(EPPDATA(port)); buf++; - if (inb (STATUS (port)) & 0x01) { + if (inb(STATUS(port)) & 0x01) { /* EPP timeout */ - clear_epp_timeout (port); + clear_epp_timeout(port); break; } } @@ -371,28 +376,27 @@ static size_t parport_pc_epp_read_data (struct parport *port, void *buf, return got; } -static size_t parport_pc_epp_write_data (struct parport *port, const void *buf, - size_t length, int flags) +static size_t parport_pc_epp_write_data(struct parport *port, const void *buf, + size_t length, int flags) { size_t written = 0; if ((flags & PARPORT_EPP_FAST) && (length > 1)) { - if (!(((long)buf | length) & 0x03)) { - outsl (EPPDATA (port), buf, (length >> 2)); - } else { - outsb (EPPDATA (port), buf, length); - } - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + if (!(((long)buf | length) & 0x03)) + outsl(EPPDATA(port), buf, (length >> 2)); + else + outsb(EPPDATA(port), buf, length); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); return -EIO; } return length; } for (; written < length; written++) { - outb (*((char*)buf), EPPDATA(port)); + outb(*((char *)buf), EPPDATA(port)); buf++; - if (inb (STATUS(port)) & 0x01) { - clear_epp_timeout (port); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); break; } } @@ -400,24 +404,24 @@ static size_t parport_pc_epp_write_data (struct parport *port, const void *buf, return written; } -static size_t parport_pc_epp_read_addr (struct parport *port, void *buf, +static size_t parport_pc_epp_read_addr(struct parport *port, void *buf, size_t length, int flags) { size_t got = 0; if ((flags & PARPORT_EPP_FAST) && (length > 1)) { - insb (EPPADDR (port), buf, length); - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + insb(EPPADDR(port), buf, length); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); return -EIO; } return length; } for (; got < length; got++) { - *((char*)buf) = inb (EPPADDR (port)); + *((char *)buf) = inb(EPPADDR(port)); buf++; - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); break; } } @@ -425,25 +429,25 @@ static size_t parport_pc_epp_read_addr (struct parport *port, void *buf, return got; } -static size_t parport_pc_epp_write_addr (struct parport *port, +static size_t parport_pc_epp_write_addr(struct parport *port, const void *buf, size_t length, int flags) { size_t written = 0; if ((flags & PARPORT_EPP_FAST) && (length > 1)) { - outsb (EPPADDR (port), buf, length); - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + outsb(EPPADDR(port), buf, length); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); return -EIO; } return length; } for (; written < length; written++) { - outb (*((char*)buf), EPPADDR (port)); + outb(*((char *)buf), EPPADDR(port)); buf++; - if (inb (STATUS (port)) & 0x01) { - clear_epp_timeout (port); + if (inb(STATUS(port)) & 0x01) { + clear_epp_timeout(port); break; } } @@ -451,74 +455,74 @@ static size_t parport_pc_epp_write_addr (struct parport *port, return written; } -static size_t parport_pc_ecpepp_read_data (struct parport *port, void *buf, - size_t length, int flags) +static size_t parport_pc_ecpepp_read_data(struct parport *port, void *buf, + size_t length, int flags) { size_t got; - frob_set_mode (port, ECR_EPP); - parport_pc_data_reverse (port); - parport_pc_write_control (port, 0x4); - got = parport_pc_epp_read_data (port, buf, length, flags); - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_EPP); + parport_pc_data_reverse(port); + parport_pc_write_control(port, 0x4); + got = parport_pc_epp_read_data(port, buf, length, flags); + frob_set_mode(port, ECR_PS2); return got; } -static size_t parport_pc_ecpepp_write_data (struct parport *port, - const void *buf, size_t length, - int flags) +static size_t parport_pc_ecpepp_write_data(struct parport *port, + const void *buf, size_t length, + int flags) { size_t written; - frob_set_mode (port, ECR_EPP); - parport_pc_write_control (port, 0x4); - parport_pc_data_forward (port); - written = parport_pc_epp_write_data (port, buf, length, flags); - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_EPP); + parport_pc_write_control(port, 0x4); + parport_pc_data_forward(port); + written = parport_pc_epp_write_data(port, buf, length, flags); + frob_set_mode(port, ECR_PS2); return written; } -static size_t parport_pc_ecpepp_read_addr (struct parport *port, void *buf, - size_t length, int flags) +static size_t parport_pc_ecpepp_read_addr(struct parport *port, void *buf, + size_t length, int flags) { size_t got; - frob_set_mode (port, ECR_EPP); - parport_pc_data_reverse (port); - parport_pc_write_control (port, 0x4); - got = parport_pc_epp_read_addr (port, buf, length, flags); - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_EPP); + parport_pc_data_reverse(port); + parport_pc_write_control(port, 0x4); + got = parport_pc_epp_read_addr(port, buf, length, flags); + frob_set_mode(port, ECR_PS2); return got; } -static size_t parport_pc_ecpepp_write_addr (struct parport *port, +static size_t parport_pc_ecpepp_write_addr(struct parport *port, const void *buf, size_t length, int flags) { size_t written; - frob_set_mode (port, ECR_EPP); - parport_pc_write_control (port, 0x4); - parport_pc_data_forward (port); - written = parport_pc_epp_write_addr (port, buf, length, flags); - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_EPP); + parport_pc_write_control(port, 0x4); + parport_pc_data_forward(port); + written = parport_pc_epp_write_addr(port, buf, length, flags); + frob_set_mode(port, ECR_PS2); return written; } #endif /* IEEE 1284 support */ #ifdef CONFIG_PARPORT_PC_FIFO -static size_t parport_pc_fifo_write_block_pio (struct parport *port, +static size_t parport_pc_fifo_write_block_pio(struct parport *port, const void *buf, size_t length) { int ret = 0; const unsigned char *bufp = buf; size_t left = length; unsigned long expire = jiffies + port->physport->cad->timeout; - const int fifo = FIFO (port); + const int fifo = FIFO(port); int poll_for = 8; /* 80 usecs */ const struct parport_pc_private *priv = port->physport->private_data; const int fifo_depth = priv->fifo_depth; @@ -526,25 +530,25 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port, port = port->physport; /* We don't want to be interrupted every character. */ - parport_pc_disable_irq (port); + parport_pc_disable_irq(port); /* set nErrIntrEn and serviceIntr */ - frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2)); + frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2)); /* Forward mode. */ - parport_pc_data_forward (port); /* Must be in PS2 mode */ + parport_pc_data_forward(port); /* Must be in PS2 mode */ while (left) { unsigned char byte; - unsigned char ecrval = inb (ECONTROL (port)); + unsigned char ecrval = inb(ECONTROL(port)); int i = 0; - if (need_resched() && time_before (jiffies, expire)) + if (need_resched() && time_before(jiffies, expire)) /* Can't yield the port. */ - schedule (); + schedule(); /* Anyone else waiting for the port? */ if (port->waithead) { - printk (KERN_DEBUG "Somebody wants the port\n"); + printk(KERN_DEBUG "Somebody wants the port\n"); break; } @@ -552,21 +556,22 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port, /* FIFO is full. Wait for interrupt. */ /* Clear serviceIntr */ - ECR_WRITE (port, ecrval & ~(1<<2)); - false_alarm: - ret = parport_wait_event (port, HZ); - if (ret < 0) break; + ECR_WRITE(port, ecrval & ~(1<<2)); +false_alarm: + ret = parport_wait_event(port, HZ); + if (ret < 0) + break; ret = 0; - if (!time_before (jiffies, expire)) { + if (!time_before(jiffies, expire)) { /* Timed out. */ - printk (KERN_DEBUG "FIFO write timed out\n"); + printk(KERN_DEBUG "FIFO write timed out\n"); break; } - ecrval = inb (ECONTROL (port)); + ecrval = inb(ECONTROL(port)); if (!(ecrval & (1<<2))) { if (need_resched() && - time_before (jiffies, expire)) - schedule (); + time_before(jiffies, expire)) + schedule(); goto false_alarm; } @@ -577,38 +582,38 @@ static size_t parport_pc_fifo_write_block_pio (struct parport *port, /* Can't fail now. */ expire = jiffies + port->cad->timeout; - poll: - if (signal_pending (current)) +poll: + if (signal_pending(current)) break; if (ecrval & 0x01) { /* FIFO is empty. Blast it full. */ const int n = left < fifo_depth ? left : fifo_depth; - outsb (fifo, bufp, n); + outsb(fifo, bufp, n); bufp += n; left -= n; /* Adjust the poll time. */ - if (i < (poll_for - 2)) poll_for--; + if (i < (poll_for - 2)) + poll_for--; continue; } else if (i++ < poll_for) { - udelay (10); - ecrval = inb (ECONTROL (port)); + udelay(10); + ecrval = inb(ECONTROL(port)); goto poll; } - /* Half-full (call me an optimist) */ + /* Half-full(call me an optimist) */ byte = *bufp++; - outb (byte, fifo); + outb(byte, fifo); left--; - } - -dump_parport_state ("leave fifo_write_block_pio", port); + } + dump_parport_state("leave fifo_write_block_pio", port); return length - left; } #ifdef HAS_DMA -static size_t parport_pc_fifo_write_block_dma (struct parport *port, +static size_t parport_pc_fifo_write_block_dma(struct parport *port, const void *buf, size_t length) { int ret = 0; @@ -621,7 +626,7 @@ static size_t parport_pc_fifo_write_block_dma (struct parport *port, unsigned long start = (unsigned long) buf; unsigned long end = (unsigned long) buf + length - 1; -dump_parport_state ("enter fifo_write_block_dma", port); +dump_parport_state("enter fifo_write_block_dma", port); if (end < MAX_DMA_ADDRESS) { /* If it would cross a 64k boundary, cap it at the end. */ if ((start ^ end) & ~0xffffUL) @@ -629,8 +634,9 @@ dump_parport_state ("enter fifo_write_block_dma", port); dma_addr = dma_handle = dma_map_single(dev, (void *)buf, length, DMA_TO_DEVICE); - } else { - /* above 16 MB we use a bounce buffer as ISA-DMA is not possible */ + } else { + /* above 16 MB we use a bounce buffer as ISA-DMA + is not possible */ maxlen = PAGE_SIZE; /* sizeof(priv->dma_buf) */ dma_addr = priv->dma_handle; dma_handle = 0; @@ -639,12 +645,12 @@ dump_parport_state ("enter fifo_write_block_dma", port); port = port->physport; /* We don't want to be interrupted every character. */ - parport_pc_disable_irq (port); + parport_pc_disable_irq(port); /* set nErrIntrEn and serviceIntr */ - frob_econtrol (port, (1<<4) | (1<<2), (1<<4) | (1<<2)); + frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2)); /* Forward mode. */ - parport_pc_data_forward (port); /* Must be in PS2 mode */ + parport_pc_data_forward(port); /* Must be in PS2 mode */ while (left) { unsigned long expire = jiffies + port->physport->cad->timeout; @@ -665,10 +671,10 @@ dump_parport_state ("enter fifo_write_block_dma", port); set_dma_count(port->dma, count); /* Set DMA mode */ - frob_econtrol (port, 1<<3, 1<<3); + frob_econtrol(port, 1<<3, 1<<3); /* Clear serviceIntr */ - frob_econtrol (port, 1<<2, 0); + frob_econtrol(port, 1<<2, 0); enable_dma(port->dma); release_dma_lock(dmaflag); @@ -676,20 +682,22 @@ dump_parport_state ("enter fifo_write_block_dma", port); /* assume DMA will be successful */ left -= count; buf += count; - if (dma_handle) dma_addr += count; + if (dma_handle) + dma_addr += count; /* Wait for interrupt. */ - false_alarm: - ret = parport_wait_event (port, HZ); - if (ret < 0) break; +false_alarm: + ret = parport_wait_event(port, HZ); + if (ret < 0) + break; ret = 0; - if (!time_before (jiffies, expire)) { + if (!time_before(jiffies, expire)) { /* Timed out. */ - printk (KERN_DEBUG "DMA write timed out\n"); + printk(KERN_DEBUG "DMA write timed out\n"); break; } /* Is serviceIntr set? */ - if (!(inb (ECONTROL (port)) & (1<<2))) { + if (!(inb(ECONTROL(port)) & (1<<2))) { cond_resched(); goto false_alarm; @@ -705,14 +713,15 @@ dump_parport_state ("enter fifo_write_block_dma", port); /* Anyone else waiting for the port? */ if (port->waithead) { - printk (KERN_DEBUG "Somebody wants the port\n"); + printk(KERN_DEBUG "Somebody wants the port\n"); break; } /* update for possible DMA residue ! */ buf -= count; left += count; - if (dma_handle) dma_addr -= count; + if (dma_handle) + dma_addr -= count; } /* Maybe got here through break, so adjust for DMA residue! */ @@ -723,12 +732,12 @@ dump_parport_state ("enter fifo_write_block_dma", port); release_dma_lock(dmaflag); /* Turn off DMA mode */ - frob_econtrol (port, 1<<3, 0); + frob_econtrol(port, 1<<3, 0); if (dma_handle) dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE); -dump_parport_state ("leave fifo_write_block_dma", port); +dump_parport_state("leave fifo_write_block_dma", port); return length - left; } #endif @@ -738,13 +747,13 @@ static inline size_t parport_pc_fifo_write_block(struct parport *port, { #ifdef HAS_DMA if (port->dma != PARPORT_DMA_NONE) - return parport_pc_fifo_write_block_dma (port, buf, length); + return parport_pc_fifo_write_block_dma(port, buf, length); #endif - return parport_pc_fifo_write_block_pio (port, buf, length); + return parport_pc_fifo_write_block_pio(port, buf, length); } /* Parallel Port FIFO mode (ECP chipsets) */ -static size_t parport_pc_compat_write_block_pio (struct parport *port, +static size_t parport_pc_compat_write_block_pio(struct parport *port, const void *buf, size_t length, int flags) { @@ -756,14 +765,16 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port, /* Special case: a timeout of zero means we cannot call schedule(). * Also if O_NONBLOCK is set then use the default implementation. */ if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK) - return parport_ieee1284_write_compat (port, buf, + return parport_ieee1284_write_compat(port, buf, length, flags); /* Set up parallel port FIFO mode.*/ - parport_pc_data_forward (port); /* Must be in PS2 mode */ - parport_pc_frob_control (port, PARPORT_CONTROL_STROBE, 0); - r = change_mode (port, ECR_PPF); /* Parallel port FIFO */ - if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", port->name); + parport_pc_data_forward(port); /* Must be in PS2 mode */ + parport_pc_frob_control(port, PARPORT_CONTROL_STROBE, 0); + r = change_mode(port, ECR_PPF); /* Parallel port FIFO */ + if (r) + printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n", + port->name); port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA; @@ -775,40 +786,39 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port, * the FIFO is empty, so allow 4 seconds for each position * in the fifo. */ - expire = jiffies + (priv->fifo_depth * HZ * 4); + expire = jiffies + (priv->fifo_depth * HZ * 4); do { /* Wait for the FIFO to empty */ - r = change_mode (port, ECR_PS2); - if (r != -EBUSY) { + r = change_mode(port, ECR_PS2); + if (r != -EBUSY) break; - } - } while (time_before (jiffies, expire)); + } while (time_before(jiffies, expire)); if (r == -EBUSY) { - printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name); + printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name); /* Prevent further data transfer. */ - frob_set_mode (port, ECR_TST); + frob_set_mode(port, ECR_TST); /* Adjust for the contents of the FIFO. */ for (written -= priv->fifo_depth; ; written++) { - if (inb (ECONTROL (port)) & 0x2) { + if (inb(ECONTROL(port)) & 0x2) { /* Full up. */ break; } - outb (0, FIFO (port)); + outb(0, FIFO(port)); } /* Reset the FIFO and return to PS2 mode. */ - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_PS2); } - r = parport_wait_peripheral (port, + r = parport_wait_peripheral(port, PARPORT_STATUS_BUSY, PARPORT_STATUS_BUSY); if (r) - printk (KERN_DEBUG - "%s: BUSY timeout (%d) in compat_write_block_pio\n", + printk(KERN_DEBUG + "%s: BUSY timeout (%d) in compat_write_block_pio\n", port->name, r); port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE; @@ -818,7 +828,7 @@ static size_t parport_pc_compat_write_block_pio (struct parport *port, /* ECP */ #ifdef CONFIG_PARPORT_1284 -static size_t parport_pc_ecp_write_block_pio (struct parport *port, +static size_t parport_pc_ecp_write_block_pio(struct parport *port, const void *buf, size_t length, int flags) { @@ -830,36 +840,38 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port, /* Special case: a timeout of zero means we cannot call schedule(). * Also if O_NONBLOCK is set then use the default implementation. */ if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK) - return parport_ieee1284_ecp_write_data (port, buf, + return parport_ieee1284_ecp_write_data(port, buf, length, flags); /* Switch to forward mode if necessary. */ if (port->physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) { /* Event 47: Set nInit high. */ - parport_frob_control (port, + parport_frob_control(port, PARPORT_CONTROL_INIT | PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_INIT | PARPORT_CONTROL_AUTOFD); /* Event 49: PError goes high. */ - r = parport_wait_peripheral (port, + r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT); if (r) { - printk (KERN_DEBUG "%s: PError timeout (%d) " + printk(KERN_DEBUG "%s: PError timeout (%d) " "in ecp_write_block_pio\n", port->name, r); } } /* Set up ECP parallel port mode.*/ - parport_pc_data_forward (port); /* Must be in PS2 mode */ - parport_pc_frob_control (port, + parport_pc_data_forward(port); /* Must be in PS2 mode */ + parport_pc_frob_control(port, PARPORT_CONTROL_STROBE | PARPORT_CONTROL_AUTOFD, 0); - r = change_mode (port, ECR_ECP); /* ECP FIFO */ - if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name); + r = change_mode(port, ECR_ECP); /* ECP FIFO */ + if (r) + printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", + port->name); port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA; /* Write the data to the FIFO. */ @@ -873,55 +885,54 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port, expire = jiffies + (priv->fifo_depth * (HZ * 4)); do { /* Wait for the FIFO to empty */ - r = change_mode (port, ECR_PS2); - if (r != -EBUSY) { + r = change_mode(port, ECR_PS2); + if (r != -EBUSY) break; - } - } while (time_before (jiffies, expire)); + } while (time_before(jiffies, expire)); if (r == -EBUSY) { - printk (KERN_DEBUG "%s: FIFO is stuck\n", port->name); + printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name); /* Prevent further data transfer. */ - frob_set_mode (port, ECR_TST); + frob_set_mode(port, ECR_TST); /* Adjust for the contents of the FIFO. */ for (written -= priv->fifo_depth; ; written++) { - if (inb (ECONTROL (port)) & 0x2) { + if (inb(ECONTROL(port)) & 0x2) { /* Full up. */ break; } - outb (0, FIFO (port)); + outb(0, FIFO(port)); } /* Reset the FIFO and return to PS2 mode. */ - frob_set_mode (port, ECR_PS2); + frob_set_mode(port, ECR_PS2); /* Host transfer recovery. */ - parport_pc_data_reverse (port); /* Must be in PS2 mode */ - udelay (5); - parport_frob_control (port, PARPORT_CONTROL_INIT, 0); - r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0); + parport_pc_data_reverse(port); /* Must be in PS2 mode */ + udelay(5); + parport_frob_control(port, PARPORT_CONTROL_INIT, 0); + r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0); if (r) - printk (KERN_DEBUG "%s: PE,1 timeout (%d) " + printk(KERN_DEBUG "%s: PE,1 timeout (%d) " "in ecp_write_block_pio\n", port->name, r); - parport_frob_control (port, + parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT); - r = parport_wait_peripheral (port, + r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT); - if (r) - printk (KERN_DEBUG "%s: PE,2 timeout (%d) " + if (r) + printk(KERN_DEBUG "%s: PE,2 timeout (%d) " "in ecp_write_block_pio\n", port->name, r); } - r = parport_wait_peripheral (port, - PARPORT_STATUS_BUSY, + r = parport_wait_peripheral(port, + PARPORT_STATUS_BUSY, PARPORT_STATUS_BUSY); - if(r) - printk (KERN_DEBUG + if (r) + printk(KERN_DEBUG "%s: BUSY timeout (%d) in ecp_write_block_pio\n", port->name, r); @@ -931,7 +942,7 @@ static size_t parport_pc_ecp_write_block_pio (struct parport *port, } #if 0 -static size_t parport_pc_ecp_read_block_pio (struct parport *port, +static size_t parport_pc_ecp_read_block_pio(struct parport *port, void *buf, size_t length, int flags) { @@ -944,13 +955,13 @@ static size_t parport_pc_ecp_read_block_pio (struct parport *port, char *bufp = buf; port = port->physport; -DPRINTK (KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n"); -dump_parport_state ("enter fcn", port); +DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n"); +dump_parport_state("enter fcn", port); /* Special case: a timeout of zero means we cannot call schedule(). * Also if O_NONBLOCK is set then use the default implementation. */ if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK) - return parport_ieee1284_ecp_read_data (port, buf, + return parport_ieee1284_ecp_read_data(port, buf, length, flags); if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) { @@ -966,173 +977,177 @@ dump_parport_state ("enter fcn", port); * go through software emulation. Otherwise we may have to throw * away data. */ if (length < fifofull) - return parport_ieee1284_ecp_read_data (port, buf, + return parport_ieee1284_ecp_read_data(port, buf, length, flags); if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) { /* change to reverse-idle phase (must be in forward-idle) */ /* Event 38: Set nAutoFd low (also make sure nStrobe is high) */ - parport_frob_control (port, + parport_frob_control(port, PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE, PARPORT_CONTROL_AUTOFD); - parport_pc_data_reverse (port); /* Must be in PS2 mode */ - udelay (5); + parport_pc_data_reverse(port); /* Must be in PS2 mode */ + udelay(5); /* Event 39: Set nInit low to initiate bus reversal */ - parport_frob_control (port, + parport_frob_control(port, PARPORT_CONTROL_INIT, 0); /* Event 40: Wait for nAckReverse (PError) to go low */ - r = parport_wait_peripheral (port, PARPORT_STATUS_PAPEROUT, 0); - if (r) { - printk (KERN_DEBUG "%s: PE timeout Event 40 (%d) " + r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0); + if (r) { + printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) " "in ecp_read_block_pio\n", port->name, r); return 0; } } /* Set up ECP FIFO mode.*/ -/* parport_pc_frob_control (port, +/* parport_pc_frob_control(port, PARPORT_CONTROL_STROBE | PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_AUTOFD); */ - r = change_mode (port, ECR_ECP); /* ECP FIFO */ - if (r) printk (KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", port->name); + r = change_mode(port, ECR_ECP); /* ECP FIFO */ + if (r) + printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n", + port->name); port->ieee1284.phase = IEEE1284_PH_REV_DATA; /* the first byte must be collected manually */ -dump_parport_state ("pre 43", port); + dump_parport_state("pre 43", port); /* Event 43: Wait for nAck to go low */ - r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0); + r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0); if (r) { /* timed out while reading -- no data */ - printk (KERN_DEBUG "PIO read timed out (initial byte)\n"); + printk(KERN_DEBUG "PIO read timed out (initial byte)\n"); goto out_no_data; } /* read byte */ - *bufp++ = inb (DATA (port)); + *bufp++ = inb(DATA(port)); left--; -dump_parport_state ("43-44", port); + dump_parport_state("43-44", port); /* Event 44: nAutoFd (HostAck) goes high to acknowledge */ - parport_pc_frob_control (port, + parport_pc_frob_control(port, PARPORT_CONTROL_AUTOFD, 0); -dump_parport_state ("pre 45", port); + dump_parport_state("pre 45", port); /* Event 45: Wait for nAck to go high */ -/* r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK); */ -dump_parport_state ("post 45", port); -r = 0; + /* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, + PARPORT_STATUS_ACK); */ + dump_parport_state("post 45", port); + r = 0; if (r) { /* timed out while waiting for peripheral to respond to ack */ - printk (KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n"); + printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n"); /* keep hold of the byte we've got already */ goto out_no_data; } /* Event 46: nAutoFd (HostAck) goes low to accept more data */ - parport_pc_frob_control (port, + parport_pc_frob_control(port, PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_AUTOFD); -dump_parport_state ("rev idle", port); + dump_parport_state("rev idle", port); /* Do the transfer. */ while (left > fifofull) { int ret; unsigned long expire = jiffies + port->cad->timeout; - unsigned char ecrval = inb (ECONTROL (port)); + unsigned char ecrval = inb(ECONTROL(port)); - if (need_resched() && time_before (jiffies, expire)) + if (need_resched() && time_before(jiffies, expire)) /* Can't yield the port. */ - schedule (); + schedule(); /* At this point, the FIFO may already be full. In - * that case ECP is already holding back the - * peripheral (assuming proper design) with a delayed - * handshake. Work fast to avoid a peripheral - * timeout. */ + * that case ECP is already holding back the + * peripheral (assuming proper design) with a delayed + * handshake. Work fast to avoid a peripheral + * timeout. */ if (ecrval & 0x01) { /* FIFO is empty. Wait for interrupt. */ -dump_parport_state ("FIFO empty", port); + dump_parport_state("FIFO empty", port); /* Anyone else waiting for the port? */ if (port->waithead) { - printk (KERN_DEBUG "Somebody wants the port\n"); + printk(KERN_DEBUG "Somebody wants the port\n"); break; } /* Clear serviceIntr */ - ECR_WRITE (port, ecrval & ~(1<<2)); - false_alarm: -dump_parport_state ("waiting", port); - ret = parport_wait_event (port, HZ); -DPRINTK (KERN_DEBUG "parport_wait_event returned %d\n", ret); + ECR_WRITE(port, ecrval & ~(1<<2)); +false_alarm: + dump_parport_state("waiting", port); + ret = parport_wait_event(port, HZ); + DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n", + ret); if (ret < 0) break; ret = 0; - if (!time_before (jiffies, expire)) { + if (!time_before(jiffies, expire)) { /* Timed out. */ -dump_parport_state ("timeout", port); - printk (KERN_DEBUG "PIO read timed out\n"); + dump_parport_state("timeout", port); + printk(KERN_DEBUG "PIO read timed out\n"); break; } - ecrval = inb (ECONTROL (port)); + ecrval = inb(ECONTROL(port)); if (!(ecrval & (1<<2))) { if (need_resched() && - time_before (jiffies, expire)) { - schedule (); + time_before(jiffies, expire)) { + schedule(); } goto false_alarm; } /* Depending on how the FIFO threshold was - * set, how long interrupt service took, and - * how fast the peripheral is, we might be - * lucky and have a just filled FIFO. */ + * set, how long interrupt service took, and + * how fast the peripheral is, we might be + * lucky and have a just filled FIFO. */ continue; } if (ecrval & 0x02) { /* FIFO is full. */ -dump_parport_state ("FIFO full", port); - insb (fifo, bufp, fifo_depth); +dump_parport_state("FIFO full", port); + insb(fifo, bufp, fifo_depth); bufp += fifo_depth; left -= fifo_depth; continue; } -DPRINTK (KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n"); +DPRINTK(KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n"); /* FIFO not filled. We will cycle this loop for a while - * and either the peripheral will fill it faster, - * tripping a fast empty with insb, or we empty it. */ - *bufp++ = inb (fifo); + * and either the peripheral will fill it faster, + * tripping a fast empty with insb, or we empty it. */ + *bufp++ = inb(fifo); left--; } /* scoop up anything left in the FIFO */ - while (left && !(inb (ECONTROL (port) & 0x01))) { - *bufp++ = inb (fifo); + while (left && !(inb(ECONTROL(port) & 0x01))) { + *bufp++ = inb(fifo); left--; } port->ieee1284.phase = IEEE1284_PH_REV_IDLE; -dump_parport_state ("rev idle2", port); +dump_parport_state("rev idle2", port); out_no_data: /* Go to forward idle mode to shut the peripheral up (event 47). */ - parport_frob_control (port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT); + parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT); /* event 49: PError goes high */ - r = parport_wait_peripheral (port, + r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT); if (r) { - printk (KERN_DEBUG + printk(KERN_DEBUG "%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n", port->name, r); } @@ -1141,14 +1156,14 @@ out_no_data: /* Finish up. */ { - int lost = get_fifo_residue (port); + int lost = get_fifo_residue(port); if (lost) /* Shouldn't happen with compliant peripherals. */ - printk (KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n", + printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n", port->name, lost); } -dump_parport_state ("fwd idle", port); +dump_parport_state("fwd idle", port); return length - left; } #endif /* 0 */ @@ -1164,8 +1179,7 @@ dump_parport_state ("fwd idle", port); /* GCC is not inlining extern inline function later overwriten to non-inline, so we use outlined_ variants here. */ -static const struct parport_operations parport_pc_ops = -{ +static const struct parport_operations parport_pc_ops = { .write_data = parport_pc_write_data, .read_data = parport_pc_read_data, @@ -1205,46 +1219,52 @@ static const struct parport_operations parport_pc_ops = /* Super-IO chipset detection, Winbond, SMSC */ static void __devinit show_parconfig_smsc37c669(int io, int key) { - int cr1,cr4,cra,cr23,cr26,cr27,i=0; - static const char *const modes[]={ + int cr1, cr4, cra, cr23, cr26, cr27, i = 0; + static const char *const modes[] = { "SPP and Bidirectional (PS/2)", "EPP and SPP", "ECP", "ECP and EPP" }; - outb(key,io); - outb(key,io); - outb(1,io); - cr1=inb(io+1); - outb(4,io); - cr4=inb(io+1); - outb(0x0a,io); - cra=inb(io+1); - outb(0x23,io); - cr23=inb(io+1); - outb(0x26,io); - cr26=inb(io+1); - outb(0x27,io); - cr27=inb(io+1); - outb(0xaa,io); + outb(key, io); + outb(key, io); + outb(1, io); + cr1 = inb(io + 1); + outb(4, io); + cr4 = inb(io + 1); + outb(0x0a, io); + cra = inb(io + 1); + outb(0x23, io); + cr23 = inb(io + 1); + outb(0x26, io); + cr26 = inb(io + 1); + outb(0x27, io); + cr27 = inb(io + 1); + outb(0xaa, io); if (verbose_probing) { - printk (KERN_INFO "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, " + printk(KERN_INFO + "SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, " "A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n", - cr1,cr4,cra,cr23,cr26,cr27); - + cr1, cr4, cra, cr23, cr26, cr27); + /* The documentation calls DMA and IRQ-Lines by letters, so the board maker can/will wire them appropriately/randomly... G=reserved H=IDE-irq, */ - printk (KERN_INFO "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, " - "fifo threshold=%d\n", cr23*4, - (cr27 &0x0f) ? 'A'-1+(cr27 &0x0f): '-', - (cr26 &0x0f) ? 'A'-1+(cr26 &0x0f): '-', cra & 0x0f); + printk(KERN_INFO + "SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n", + cr23 * 4, + (cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-', + (cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-', + cra & 0x0f); printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n", - (cr23*4 >=0x100) ?"yes":"no", (cr1 & 4) ? "yes" : "no"); - printk(KERN_INFO "SMSC LPT Config: Port mode=%s, EPP version =%s\n", - (cr1 & 0x08 ) ? "Standard mode only (SPP)" : modes[cr4 & 0x03], - (cr4 & 0x40) ? "1.7" : "1.9"); + (cr23 * 4 >= 0x100) ? "yes" : "no", + (cr1 & 4) ? "yes" : "no"); + printk(KERN_INFO + "SMSC LPT Config: Port mode=%s, EPP version =%s\n", + (cr1 & 0x08) ? "Standard mode only (SPP)" + : modes[cr4 & 0x03], + (cr4 & 0x40) ? "1.7" : "1.9"); } /* Heuristics ! BIOS setup for this mainboard device limits @@ -1258,32 +1278,32 @@ static void __devinit show_parconfig_smsc37c669(int io, int key) printk(KERN_INFO "Super-IO: too many chips!\n"); } else { int d; - switch (cr23*4) { - case 0x3bc: - superios[i].io = 0x3bc; - superios[i].irq = 7; - break; - case 0x378: - superios[i].io = 0x378; - superios[i].irq = 7; - break; - case 0x278: - superios[i].io = 0x278; - superios[i].irq = 5; + switch (cr23 * 4) { + case 0x3bc: + superios[i].io = 0x3bc; + superios[i].irq = 7; + break; + case 0x378: + superios[i].io = 0x378; + superios[i].irq = 7; + break; + case 0x278: + superios[i].io = 0x278; + superios[i].irq = 5; } - d=(cr26 &0x0f); - if((d==1) || (d==3)) - superios[i].dma= d; + d = (cr26 & 0x0f); + if (d == 1 || d == 3) + superios[i].dma = d; else - superios[i].dma= PARPORT_DMA_NONE; + superios[i].dma = PARPORT_DMA_NONE; } - } + } } static void __devinit show_parconfig_winbond(int io, int key) { - int cr30,cr60,cr61,cr70,cr74,crf0,i=0; + int cr30, cr60, cr61, cr70, cr74, crf0, i = 0; static const char *const modes[] = { "Standard (SPP) and Bidirectional(PS/2)", /* 0 */ "EPP-1.9 and SPP", @@ -1296,40 +1316,43 @@ static void __devinit show_parconfig_winbond(int io, int key) static char *const irqtypes[] = { "pulsed low, high-Z", "follows nACK" }; - + /* The registers are called compatible-PnP because the - register layout is modelled after ISA-PnP, the access - method is just another ... */ - outb(key,io); - outb(key,io); - outb(0x07,io); /* Register 7: Select Logical Device */ - outb(0x01,io+1); /* LD1 is Parallel Port */ - outb(0x30,io); - cr30=inb(io+1); - outb(0x60,io); - cr60=inb(io+1); - outb(0x61,io); - cr61=inb(io+1); - outb(0x70,io); - cr70=inb(io+1); - outb(0x74,io); - cr74=inb(io+1); - outb(0xf0,io); - crf0=inb(io+1); - outb(0xaa,io); + register layout is modelled after ISA-PnP, the access + method is just another ... */ + outb(key, io); + outb(key, io); + outb(0x07, io); /* Register 7: Select Logical Device */ + outb(0x01, io + 1); /* LD1 is Parallel Port */ + outb(0x30, io); + cr30 = inb(io + 1); + outb(0x60, io); + cr60 = inb(io + 1); + outb(0x61, io); + cr61 = inb(io + 1); + outb(0x70, io); + cr70 = inb(io + 1); + outb(0x74, io); + cr74 = inb(io + 1); + outb(0xf0, io); + crf0 = inb(io + 1); + outb(0xaa, io); if (verbose_probing) { - printk(KERN_INFO "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x " - "70=%02x 74=%02x, f0=%02x\n", cr30,cr60,cr61,cr70,cr74,crf0); - printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", - (cr30 & 0x01) ? "yes":"no", cr60,cr61,cr70&0x0f ); + printk(KERN_INFO + "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n", + cr30, cr60, cr61, cr70, cr74, crf0); + printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ", + (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f); if ((cr74 & 0x07) > 3) printk("dma=none\n"); else - printk("dma=%d\n",cr74 & 0x07); - printk(KERN_INFO "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n", - irqtypes[crf0>>7], (crf0>>3)&0x0f); - printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", modes[crf0 & 0x07]); + printk("dma=%d\n", cr74 & 0x07); + printk(KERN_INFO + "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n", + irqtypes[crf0>>7], (crf0>>3)&0x0f); + printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n", + modes[crf0 & 0x07]); } if (cr30 & 0x01) { /* the settings can be interrogated later ... */ @@ -1346,60 +1369,82 @@ static void __devinit show_parconfig_winbond(int io, int key) } } -static void __devinit decode_winbond(int efer, int key, int devid, int devrev, int oldid) +static void __devinit decode_winbond(int efer, int key, int devid, + int devrev, int oldid) { const char *type = "unknown"; - int id,progif=2; + int id, progif = 2; if (devid == devrev) /* simple heuristics, we happened to read some - non-winbond register */ + non-winbond register */ return; - id=(devid<<8) | devrev; + id = (devid << 8) | devrev; /* Values are from public data sheets pdf files, I can just - confirm 83977TF is correct :-) */ - if (id == 0x9771) type="83977F/AF"; - else if (id == 0x9773) type="83977TF / SMSC 97w33x/97w34x"; - else if (id == 0x9774) type="83977ATF"; - else if ((id & ~0x0f) == 0x5270) type="83977CTF / SMSC 97w36x"; - else if ((id & ~0x0f) == 0x52f0) type="83977EF / SMSC 97w35x"; - else if ((id & ~0x0f) == 0x5210) type="83627"; - else if ((id & ~0x0f) == 0x6010) type="83697HF"; - else if ((oldid &0x0f ) == 0x0a) { type="83877F"; progif=1;} - else if ((oldid &0x0f ) == 0x0b) { type="83877AF"; progif=1;} - else if ((oldid &0x0f ) == 0x0c) { type="83877TF"; progif=1;} - else if ((oldid &0x0f ) == 0x0d) { type="83877ATF"; progif=1;} - else progif=0; + confirm 83977TF is correct :-) */ + if (id == 0x9771) + type = "83977F/AF"; + else if (id == 0x9773) + type = "83977TF / SMSC 97w33x/97w34x"; + else if (id == 0x9774) + type = "83977ATF"; + else if ((id & ~0x0f) == 0x5270) + type = "83977CTF / SMSC 97w36x"; + else if ((id & ~0x0f) == 0x52f0) + type = "83977EF / SMSC 97w35x"; + else if ((id & ~0x0f) == 0x5210) + type = "83627"; + else if ((id & ~0x0f) == 0x6010) + type = "83697HF"; + else if ((oldid & 0x0f) == 0x0a) { + type = "83877F"; + progif = 1; + } else if ((oldid & 0x0f) == 0x0b) { + type = "83877AF"; + progif = 1; + } else if ((oldid & 0x0f) == 0x0c) { + type = "83877TF"; + progif = 1; + } else if ((oldid & 0x0f) == 0x0d) { + type = "83877ATF"; + progif = 1; + } else + progif = 0; if (verbose_probing) printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x " - "devid=%02x devrev=%02x oldid=%02x type=%s\n", + "devid=%02x devrev=%02x oldid=%02x type=%s\n", efer, key, devid, devrev, oldid, type); if (progif == 2) - show_parconfig_winbond(efer,key); + show_parconfig_winbond(efer, key); } static void __devinit decode_smsc(int efer, int key, int devid, int devrev) { - const char *type = "unknown"; + const char *type = "unknown"; void (*func)(int io, int key); - int id; + int id; - if (devid == devrev) + if (devid == devrev) /* simple heuristics, we happened to read some - non-smsc register */ + non-smsc register */ return; - func=NULL; - id=(devid<<8) | devrev; + func = NULL; + id = (devid << 8) | devrev; - if (id==0x0302) {type="37c669"; func=show_parconfig_smsc37c669;} - else if (id==0x6582) type="37c665IR"; - else if (devid==0x65) type="37c665GT"; - else if (devid==0x66) type="37c666GT"; + if (id == 0x0302) { + type = "37c669"; + func = show_parconfig_smsc37c669; + } else if (id == 0x6582) + type = "37c665IR"; + else if (devid == 0x65) + type = "37c665GT"; + else if (devid == 0x66) + type = "37c666GT"; if (verbose_probing) printk(KERN_INFO "SMSC chip at EFER=0x%x " @@ -1407,138 +1452,138 @@ static void __devinit decode_smsc(int efer, int key, int devid, int devrev) efer, key, devid, devrev, type); if (func) - func(efer,key); + func(efer, key); } static void __devinit winbond_check(int io, int key) { - int devid,devrev,oldid,x_devid,x_devrev,x_oldid; + int devid, devrev, oldid, x_devid, x_devrev, x_oldid; if (!request_region(io, 3, __func__)) return; /* First probe without key */ - outb(0x20,io); - x_devid=inb(io+1); - outb(0x21,io); - x_devrev=inb(io+1); - outb(0x09,io); - x_oldid=inb(io+1); - - outb(key,io); - outb(key,io); /* Write Magic Sequence to EFER, extended - funtion enable register */ - outb(0x20,io); /* Write EFIR, extended function index register */ - devid=inb(io+1); /* Read EFDR, extended function data register */ - outb(0x21,io); - devrev=inb(io+1); - outb(0x09,io); - oldid=inb(io+1); - outb(0xaa,io); /* Magic Seal */ + outb(0x20, io); + x_devid = inb(io + 1); + outb(0x21, io); + x_devrev = inb(io + 1); + outb(0x09, io); + x_oldid = inb(io + 1); + + outb(key, io); + outb(key, io); /* Write Magic Sequence to EFER, extended + funtion enable register */ + outb(0x20, io); /* Write EFIR, extended function index register */ + devid = inb(io + 1); /* Read EFDR, extended function data register */ + outb(0x21, io); + devrev = inb(io + 1); + outb(0x09, io); + oldid = inb(io + 1); + outb(0xaa, io); /* Magic Seal */ if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid)) goto out; /* protection against false positives */ - decode_winbond(io,key,devid,devrev,oldid); + decode_winbond(io, key, devid, devrev, oldid); out: release_region(io, 3); } -static void __devinit winbond_check2(int io,int key) +static void __devinit winbond_check2(int io, int key) { - int devid,devrev,oldid,x_devid,x_devrev,x_oldid; + int devid, devrev, oldid, x_devid, x_devrev, x_oldid; if (!request_region(io, 3, __func__)) return; /* First probe without the key */ - outb(0x20,io+2); - x_devid=inb(io+2); - outb(0x21,io+1); - x_devrev=inb(io+2); - outb(0x09,io+1); - x_oldid=inb(io+2); - - outb(key,io); /* Write Magic Byte to EFER, extended - funtion enable register */ - outb(0x20,io+2); /* Write EFIR, extended function index register */ - devid=inb(io+2); /* Read EFDR, extended function data register */ - outb(0x21,io+1); - devrev=inb(io+2); - outb(0x09,io+1); - oldid=inb(io+2); - outb(0xaa,io); /* Magic Seal */ - - if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid)) + outb(0x20, io + 2); + x_devid = inb(io + 2); + outb(0x21, io + 1); + x_devrev = inb(io + 2); + outb(0x09, io + 1); + x_oldid = inb(io + 2); + + outb(key, io); /* Write Magic Byte to EFER, extended + funtion enable register */ + outb(0x20, io + 2); /* Write EFIR, extended function index register */ + devid = inb(io + 2); /* Read EFDR, extended function data register */ + outb(0x21, io + 1); + devrev = inb(io + 2); + outb(0x09, io + 1); + oldid = inb(io + 2); + outb(0xaa, io); /* Magic Seal */ + + if (x_devid == devid && x_devrev == devrev && x_oldid == oldid) goto out; /* protection against false positives */ - decode_winbond(io,key,devid,devrev,oldid); + decode_winbond(io, key, devid, devrev, oldid); out: release_region(io, 3); } static void __devinit smsc_check(int io, int key) { - int id,rev,oldid,oldrev,x_id,x_rev,x_oldid,x_oldrev; + int id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev; if (!request_region(io, 3, __func__)) return; /* First probe without the key */ - outb(0x0d,io); - x_oldid=inb(io+1); - outb(0x0e,io); - x_oldrev=inb(io+1); - outb(0x20,io); - x_id=inb(io+1); - outb(0x21,io); - x_rev=inb(io+1); - - outb(key,io); - outb(key,io); /* Write Magic Sequence to EFER, extended - funtion enable register */ - outb(0x0d,io); /* Write EFIR, extended function index register */ - oldid=inb(io+1); /* Read EFDR, extended function data register */ - outb(0x0e,io); - oldrev=inb(io+1); - outb(0x20,io); - id=inb(io+1); - outb(0x21,io); - rev=inb(io+1); - outb(0xaa,io); /* Magic Seal */ - - if ((x_id == id) && (x_oldrev == oldrev) && - (x_oldid == oldid) && (x_rev == rev)) + outb(0x0d, io); + x_oldid = inb(io + 1); + outb(0x0e, io); + x_oldrev = inb(io + 1); + outb(0x20, io); + x_id = inb(io + 1); + outb(0x21, io); + x_rev = inb(io + 1); + + outb(key, io); + outb(key, io); /* Write Magic Sequence to EFER, extended + funtion enable register */ + outb(0x0d, io); /* Write EFIR, extended function index register */ + oldid = inb(io + 1); /* Read EFDR, extended function data register */ + outb(0x0e, io); + oldrev = inb(io + 1); + outb(0x20, io); + id = inb(io + 1); + outb(0x21, io); + rev = inb(io + 1); + outb(0xaa, io); /* Magic Seal */ + + if (x_id == id && x_oldrev == oldrev && + x_oldid == oldid && x_rev == rev) goto out; /* protection against false positives */ - decode_smsc(io,key,oldid,oldrev); + decode_smsc(io, key, oldid, oldrev); out: release_region(io, 3); } -static void __devinit detect_and_report_winbond (void) -{ +static void __devinit detect_and_report_winbond(void) +{ if (verbose_probing) printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n"); - winbond_check(0x3f0,0x87); - winbond_check(0x370,0x87); - winbond_check(0x2e ,0x87); - winbond_check(0x4e ,0x87); - winbond_check(0x3f0,0x86); - winbond_check2(0x250,0x88); - winbond_check2(0x250,0x89); + winbond_check(0x3f0, 0x87); + winbond_check(0x370, 0x87); + winbond_check(0x2e , 0x87); + winbond_check(0x4e , 0x87); + winbond_check(0x3f0, 0x86); + winbond_check2(0x250, 0x88); + winbond_check2(0x250, 0x89); } -static void __devinit detect_and_report_smsc (void) +static void __devinit detect_and_report_smsc(void) { if (verbose_probing) printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n"); - smsc_check(0x3f0,0x55); - smsc_check(0x370,0x55); - smsc_check(0x3f0,0x44); - smsc_check(0x370,0x44); + smsc_check(0x3f0, 0x55); + smsc_check(0x370, 0x55); + smsc_check(0x3f0, 0x44); + smsc_check(0x370, 0x44); } static void __devinit detect_and_report_it87(void) @@ -1573,7 +1618,7 @@ static void __devinit detect_and_report_it87(void) } #endif /* CONFIG_PARPORT_PC_SUPERIO */ -static int get_superio_dma (struct parport *p) +static int get_superio_dma(struct parport *p) { int i = 0; @@ -1584,15 +1629,15 @@ static int get_superio_dma (struct parport *p) return PARPORT_DMA_NONE; } -static int get_superio_irq (struct parport *p) +static int get_superio_irq(struct parport *p) { int i = 0; - while ((i < NR_SUPERIOS) && (superios[i].io != p->base)) - i++; - if (i != NR_SUPERIOS) - return superios[i].irq; - return PARPORT_IRQ_NONE; + while ((i < NR_SUPERIOS) && (superios[i].io != p->base)) + i++; + if (i != NR_SUPERIOS) + return superios[i].irq; + return PARPORT_IRQ_NONE; } @@ -1600,9 +1645,9 @@ static int get_superio_irq (struct parport *p) /* * Checks for port existence, all ports support SPP MODE - * Returns: + * Returns: * 0 : No parallel port at this address - * PARPORT_MODE_PCSPP : SPP port detected + * PARPORT_MODE_PCSPP : SPP port detected * (if the user specified an ioport himself, * this shall always be the case!) * @@ -1612,7 +1657,7 @@ static int parport_SPP_supported(struct parport *pb) unsigned char r, w; /* - * first clear an eventually pending EPP timeout + * first clear an eventually pending EPP timeout * I (sailer@ife.ee.ethz.ch) have an SMSC chipset * that does not even respond to SPP cycles if an EPP * timeout is pending @@ -1621,19 +1666,19 @@ static int parport_SPP_supported(struct parport *pb) /* Do a simple read-write test to make sure the port exists. */ w = 0xc; - outb (w, CONTROL (pb)); + outb(w, CONTROL(pb)); /* Is there a control register that we can read from? Some * ports don't allow reads, so read_control just returns a * software copy. Some ports _do_ allow reads, so bypass the * software copy here. In addition, some bits aren't * writable. */ - r = inb (CONTROL (pb)); + r = inb(CONTROL(pb)); if ((r & 0xf) == w) { w = 0xe; - outb (w, CONTROL (pb)); - r = inb (CONTROL (pb)); - outb (0xc, CONTROL (pb)); + outb(w, CONTROL(pb)); + r = inb(CONTROL(pb)); + outb(0xc, CONTROL(pb)); if ((r & 0xf) == w) return PARPORT_MODE_PCSPP; } @@ -1641,18 +1686,18 @@ static int parport_SPP_supported(struct parport *pb) if (user_specified) /* That didn't work, but the user thinks there's a * port here. */ - printk (KERN_INFO "parport 0x%lx (WARNING): CTR: " + printk(KERN_INFO "parport 0x%lx (WARNING): CTR: " "wrote 0x%02x, read 0x%02x\n", pb->base, w, r); /* Try the data register. The data lines aren't tri-stated at * this stage, so we expect back what we wrote. */ w = 0xaa; - parport_pc_write_data (pb, w); - r = parport_pc_read_data (pb); + parport_pc_write_data(pb, w); + r = parport_pc_read_data(pb); if (r == w) { w = 0x55; - parport_pc_write_data (pb, w); - r = parport_pc_read_data (pb); + parport_pc_write_data(pb, w); + r = parport_pc_read_data(pb); if (r == w) return PARPORT_MODE_PCSPP; } @@ -1660,9 +1705,9 @@ static int parport_SPP_supported(struct parport *pb) if (user_specified) { /* Didn't work, but the user is convinced this is the * place. */ - printk (KERN_INFO "parport 0x%lx (WARNING): DATA: " + printk(KERN_INFO "parport 0x%lx (WARNING): DATA: " "wrote 0x%02x, read 0x%02x\n", pb->base, w, r); - printk (KERN_INFO "parport 0x%lx: You gave this address, " + printk(KERN_INFO "parport 0x%lx: You gave this address, " "but there is probably no parallel port there!\n", pb->base); } @@ -1693,33 +1738,33 @@ static int parport_ECR_present(struct parport *pb) struct parport_pc_private *priv = pb->private_data; unsigned char r = 0xc; - outb (r, CONTROL (pb)); - if ((inb (ECONTROL (pb)) & 0x3) == (r & 0x3)) { - outb (r ^ 0x2, CONTROL (pb)); /* Toggle bit 1 */ + outb(r, CONTROL(pb)); + if ((inb(ECONTROL(pb)) & 0x3) == (r & 0x3)) { + outb(r ^ 0x2, CONTROL(pb)); /* Toggle bit 1 */ - r = inb (CONTROL (pb)); - if ((inb (ECONTROL (pb)) & 0x2) == (r & 0x2)) + r = inb(CONTROL(pb)); + if ((inb(ECONTROL(pb)) & 0x2) == (r & 0x2)) goto no_reg; /* Sure that no ECR register exists */ } - - if ((inb (ECONTROL (pb)) & 0x3 ) != 0x1) + + if ((inb(ECONTROL(pb)) & 0x3) != 0x1) goto no_reg; - ECR_WRITE (pb, 0x34); - if (inb (ECONTROL (pb)) != 0x35) + ECR_WRITE(pb, 0x34); + if (inb(ECONTROL(pb)) != 0x35) goto no_reg; priv->ecr = 1; - outb (0xc, CONTROL (pb)); - + outb(0xc, CONTROL(pb)); + /* Go to mode 000 */ - frob_set_mode (pb, ECR_SPP); + frob_set_mode(pb, ECR_SPP); return 1; no_reg: - outb (0xc, CONTROL (pb)); - return 0; + outb(0xc, CONTROL(pb)); + return 0; } #ifdef CONFIG_PARPORT_1284 @@ -1729,7 +1774,7 @@ static int parport_ECR_present(struct parport *pb) * allows us to read data from the data lines. In theory we would get back * 0xff but any peripheral attached to the port may drag some or all of the * lines down to zero. So if we get back anything that isn't the contents - * of the data register we deem PS/2 support to be present. + * of the data register we deem PS/2 support to be present. * * Some SPP ports have "half PS/2" ability - you can't turn off the line * drivers, but an external peripheral with sufficiently beefy drivers of @@ -1737,26 +1782,28 @@ static int parport_ECR_present(struct parport *pb) * where they can then be read back as normal. Ports with this property * and the right type of device attached are likely to fail the SPP test, * (as they will appear to have stuck bits) and so the fact that they might - * be misdetected here is rather academic. + * be misdetected here is rather academic. */ static int parport_PS2_supported(struct parport *pb) { int ok = 0; - + clear_epp_timeout(pb); /* try to tri-state the buffer */ - parport_pc_data_reverse (pb); - + parport_pc_data_reverse(pb); + parport_pc_write_data(pb, 0x55); - if (parport_pc_read_data(pb) != 0x55) ok++; + if (parport_pc_read_data(pb) != 0x55) + ok++; parport_pc_write_data(pb, 0xaa); - if (parport_pc_read_data(pb) != 0xaa) ok++; + if (parport_pc_read_data(pb) != 0xaa) + ok++; /* cancel input mode */ - parport_pc_data_forward (pb); + parport_pc_data_forward(pb); if (ok) { pb->modes |= PARPORT_MODE_TRISTATE; @@ -1775,68 +1822,68 @@ static int parport_ECP_supported(struct parport *pb) int config, configb; int pword; struct parport_pc_private *priv = pb->private_data; - /* Translate ECP intrLine to ISA irq value */ - static const int intrline[]= { 0, 7, 9, 10, 11, 14, 15, 5 }; + /* Translate ECP intrLine to ISA irq value */ + static const int intrline[] = { 0, 7, 9, 10, 11, 14, 15, 5 }; /* If there is no ECR, we have no hope of supporting ECP. */ if (!priv->ecr) return 0; /* Find out FIFO depth */ - ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */ - ECR_WRITE (pb, ECR_TST << 5); /* TEST FIFO */ - for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02); i++) - outb (0xaa, FIFO (pb)); + ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */ + ECR_WRITE(pb, ECR_TST << 5); /* TEST FIFO */ + for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02); i++) + outb(0xaa, FIFO(pb)); /* * Using LGS chipset it uses ECR register, but * it doesn't support ECP or FIFO MODE */ if (i == 1024) { - ECR_WRITE (pb, ECR_SPP << 5); + ECR_WRITE(pb, ECR_SPP << 5); return 0; } priv->fifo_depth = i; if (verbose_probing) - printk (KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i); + printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i); /* Find out writeIntrThreshold */ - frob_econtrol (pb, 1<<2, 1<<2); - frob_econtrol (pb, 1<<2, 0); + frob_econtrol(pb, 1<<2, 1<<2); + frob_econtrol(pb, 1<<2, 0); for (i = 1; i <= priv->fifo_depth; i++) { - inb (FIFO (pb)); - udelay (50); - if (inb (ECONTROL (pb)) & (1<<2)) + inb(FIFO(pb)); + udelay(50); + if (inb(ECONTROL(pb)) & (1<<2)) break; } if (i <= priv->fifo_depth) { if (verbose_probing) - printk (KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n", + printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n", pb->base, i); } else /* Number of bytes we know we can write if we get an - interrupt. */ + interrupt. */ i = 0; priv->writeIntrThreshold = i; /* Find out readIntrThreshold */ - frob_set_mode (pb, ECR_PS2); /* Reset FIFO and enable PS2 */ - parport_pc_data_reverse (pb); /* Must be in PS2 mode */ - frob_set_mode (pb, ECR_TST); /* Test FIFO */ - frob_econtrol (pb, 1<<2, 1<<2); - frob_econtrol (pb, 1<<2, 0); + frob_set_mode(pb, ECR_PS2); /* Reset FIFO and enable PS2 */ + parport_pc_data_reverse(pb); /* Must be in PS2 mode */ + frob_set_mode(pb, ECR_TST); /* Test FIFO */ + frob_econtrol(pb, 1<<2, 1<<2); + frob_econtrol(pb, 1<<2, 0); for (i = 1; i <= priv->fifo_depth; i++) { - outb (0xaa, FIFO (pb)); - if (inb (ECONTROL (pb)) & (1<<2)) + outb(0xaa, FIFO(pb)); + if (inb(ECONTROL(pb)) & (1<<2)) break; } if (i <= priv->fifo_depth) { if (verbose_probing) - printk (KERN_INFO "0x%lx: readIntrThreshold is %d\n", + printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n", pb->base, i); } else /* Number of bytes we can read if we get an interrupt. */ @@ -1844,23 +1891,23 @@ static int parport_ECP_supported(struct parport *pb) priv->readIntrThreshold = i; - ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */ - ECR_WRITE (pb, 0xf4); /* Configuration mode */ - config = inb (CONFIGA (pb)); + ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */ + ECR_WRITE(pb, 0xf4); /* Configuration mode */ + config = inb(CONFIGA(pb)); pword = (config >> 4) & 0x7; switch (pword) { case 0: pword = 2; - printk (KERN_WARNING "0x%lx: Unsupported pword size!\n", + printk(KERN_WARNING "0x%lx: Unsupported pword size!\n", pb->base); break; case 2: pword = 4; - printk (KERN_WARNING "0x%lx: Unsupported pword size!\n", + printk(KERN_WARNING "0x%lx: Unsupported pword size!\n", pb->base); break; default: - printk (KERN_WARNING "0x%lx: Unknown implementation ID\n", + printk(KERN_WARNING "0x%lx: Unknown implementation ID\n", pb->base); /* Assume 1 */ case 1: @@ -1869,28 +1916,29 @@ static int parport_ECP_supported(struct parport *pb) priv->pword = pword; if (verbose_probing) { - printk (KERN_DEBUG "0x%lx: PWord is %d bits\n", pb->base, 8 * pword); - - printk (KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base, + printk(KERN_DEBUG "0x%lx: PWord is %d bits\n", + pb->base, 8 * pword); + + printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base, config & 0x80 ? "Level" : "Pulses"); - configb = inb (CONFIGB (pb)); - printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n", + configb = inb(CONFIGB(pb)); + printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n", pb->base, config, configb); - printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base); - if ((configb >>3) & 0x07) - printk("%d",intrline[(configb >>3) & 0x07]); + printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base); + if ((configb >> 3) & 0x07) + printk("%d", intrline[(configb >> 3) & 0x07]); else printk(""); - printk (" dma="); - if( (configb & 0x03 ) == 0x00) + printk(" dma="); + if ((configb & 0x03) == 0x00) printk("\n"); else - printk("%d\n",configb & 0x07); + printk("%d\n", configb & 0x07); } /* Go back to mode 000 */ - frob_set_mode (pb, ECR_SPP); + frob_set_mode(pb, ECR_SPP); return 1; } @@ -1905,10 +1953,10 @@ static int parport_ECPPS2_supported(struct parport *pb) if (!priv->ecr) return 0; - oecr = inb (ECONTROL (pb)); - ECR_WRITE (pb, ECR_PS2 << 5); + oecr = inb(ECONTROL(pb)); + ECR_WRITE(pb, ECR_PS2 << 5); result = parport_PS2_supported(pb); - ECR_WRITE (pb, oecr); + ECR_WRITE(pb, oecr); return result; } @@ -1932,16 +1980,15 @@ static int parport_EPP_supported(struct parport *pb) */ /* If EPP timeout bit clear then EPP available */ - if (!clear_epp_timeout(pb)) { + if (!clear_epp_timeout(pb)) return 0; /* No way to clear timeout */ - } /* Check for Intel bug. */ if (priv->ecr) { unsigned char i; for (i = 0x00; i < 0x80; i += 0x20) { - ECR_WRITE (pb, i); - if (clear_epp_timeout (pb)) { + ECR_WRITE(pb, i); + if (clear_epp_timeout(pb)) { /* Phony EPP in ECP. */ return 0; } @@ -1965,17 +2012,16 @@ static int parport_ECPEPP_supported(struct parport *pb) int result; unsigned char oecr; - if (!priv->ecr) { + if (!priv->ecr) return 0; - } - oecr = inb (ECONTROL (pb)); + oecr = inb(ECONTROL(pb)); /* Search for SMC style EPP+ECP mode */ - ECR_WRITE (pb, 0x80); - outb (0x04, CONTROL (pb)); + ECR_WRITE(pb, 0x80); + outb(0x04, CONTROL(pb)); result = parport_EPP_supported(pb); - ECR_WRITE (pb, oecr); + ECR_WRITE(pb, oecr); if (result) { /* Set up access functions to use ECP+EPP hardware. */ @@ -1993,11 +2039,25 @@ static int parport_ECPEPP_supported(struct parport *pb) /* Don't bother probing for modes we know we won't use. */ static int __devinit parport_PS2_supported(struct parport *pb) { return 0; } #ifdef CONFIG_PARPORT_PC_FIFO -static int parport_ECP_supported(struct parport *pb) { return 0; } +static int parport_ECP_supported(struct parport *pb) +{ + return 0; +} #endif -static int __devinit parport_EPP_supported(struct parport *pb) { return 0; } -static int __devinit parport_ECPEPP_supported(struct parport *pb){return 0;} -static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;} +static int __devinit parport_EPP_supported(struct parport *pb) +{ + return 0; +} + +static int __devinit parport_ECPEPP_supported(struct parport *pb) +{ + return 0; +} + +static int __devinit parport_ECPPS2_supported(struct parport *pb) +{ + return 0; +} #endif /* No IEEE 1284 support */ @@ -2007,17 +2067,17 @@ static int __devinit parport_ECPPS2_supported(struct parport *pb){return 0;} static int programmable_irq_support(struct parport *pb) { int irq, intrLine; - unsigned char oecr = inb (ECONTROL (pb)); + unsigned char oecr = inb(ECONTROL(pb)); static const int lookup[8] = { PARPORT_IRQ_NONE, 7, 9, 10, 11, 14, 15, 5 }; - ECR_WRITE (pb, ECR_CNF << 5); /* Configuration MODE */ + ECR_WRITE(pb, ECR_CNF << 5); /* Configuration MODE */ - intrLine = (inb (CONFIGB (pb)) >> 3) & 0x07; + intrLine = (inb(CONFIGB(pb)) >> 3) & 0x07; irq = lookup[intrLine]; - ECR_WRITE (pb, oecr); + ECR_WRITE(pb, oecr); return irq; } @@ -2027,17 +2087,17 @@ static int irq_probe_ECP(struct parport *pb) unsigned long irqs; irqs = probe_irq_on(); - - ECR_WRITE (pb, ECR_SPP << 5); /* Reset FIFO */ - ECR_WRITE (pb, (ECR_TST << 5) | 0x04); - ECR_WRITE (pb, ECR_TST << 5); + + ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */ + ECR_WRITE(pb, (ECR_TST << 5) | 0x04); + ECR_WRITE(pb, ECR_TST << 5); /* If Full FIFO sure that writeIntrThreshold is generated */ - for (i=0; i < 1024 && !(inb (ECONTROL (pb)) & 0x02) ; i++) - outb (0xaa, FIFO (pb)); - + for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02) ; i++) + outb(0xaa, FIFO(pb)); + pb->irq = probe_irq_off(irqs); - ECR_WRITE (pb, ECR_SPP << 5); + ECR_WRITE(pb, ECR_SPP << 5); if (pb->irq <= 0) pb->irq = PARPORT_IRQ_NONE; @@ -2047,7 +2107,7 @@ static int irq_probe_ECP(struct parport *pb) /* * This detection seems that only works in National Semiconductors - * This doesn't work in SMC, LGS, and Winbond + * This doesn't work in SMC, LGS, and Winbond */ static int irq_probe_EPP(struct parport *pb) { @@ -2058,16 +2118,16 @@ static int irq_probe_EPP(struct parport *pb) unsigned char oecr; if (pb->modes & PARPORT_MODE_PCECR) - oecr = inb (ECONTROL (pb)); + oecr = inb(ECONTROL(pb)); irqs = probe_irq_on(); if (pb->modes & PARPORT_MODE_PCECR) - frob_econtrol (pb, 0x10, 0x10); - + frob_econtrol(pb, 0x10, 0x10); + clear_epp_timeout(pb); - parport_pc_frob_control (pb, 0x20, 0x20); - parport_pc_frob_control (pb, 0x10, 0x10); + parport_pc_frob_control(pb, 0x20, 0x20); + parport_pc_frob_control(pb, 0x10, 0x10); clear_epp_timeout(pb); /* Device isn't expecting an EPP read @@ -2076,9 +2136,9 @@ static int irq_probe_EPP(struct parport *pb) parport_pc_read_epp(pb); udelay(20); - pb->irq = probe_irq_off (irqs); + pb->irq = probe_irq_off(irqs); if (pb->modes & PARPORT_MODE_PCECR) - ECR_WRITE (pb, oecr); + ECR_WRITE(pb, oecr); parport_pc_write_control(pb, 0xc); if (pb->irq <= 0) @@ -2135,28 +2195,28 @@ static int parport_irq_probe(struct parport *pb) /* --- DMA detection -------------------------------------- */ /* Only if chipset conforms to ECP ISA Interface Standard */ -static int programmable_dma_support (struct parport *p) +static int programmable_dma_support(struct parport *p) { - unsigned char oecr = inb (ECONTROL (p)); + unsigned char oecr = inb(ECONTROL(p)); int dma; - frob_set_mode (p, ECR_CNF); - - dma = inb (CONFIGB(p)) & 0x07; + frob_set_mode(p, ECR_CNF); + + dma = inb(CONFIGB(p)) & 0x07; /* 000: Indicates jumpered 8-bit DMA if read-only. 100: Indicates jumpered 16-bit DMA if read-only. */ if ((dma & 0x03) == 0) dma = PARPORT_DMA_NONE; - ECR_WRITE (p, oecr); + ECR_WRITE(p, oecr); return dma; } -static int parport_dma_probe (struct parport *p) +static int parport_dma_probe(struct parport *p) { const struct parport_pc_private *priv = p->private_data; - if (priv->ecr) - p->dma = programmable_dma_support(p); /* ask ECP chipset first */ + if (priv->ecr) /* ask ECP chipset first */ + p->dma = programmable_dma_support(p); if (p->dma == PARPORT_DMA_NONE) { /* ask known Super-IO chips proper, although these claim ECP compatible, some don't report their DMA @@ -2214,7 +2274,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, if (!base_res) goto out4; - memcpy(ops, &parport_pc_ops, sizeof (struct parport_operations)); + memcpy(ops, &parport_pc_ops, sizeof(struct parport_operations)); priv->ctr = 0xc; priv->ctr_writable = ~0x10; priv->ecr = 0; @@ -2241,7 +2301,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, if (!parport_EPP_supported(p)) parport_ECPEPP_supported(p); } - if (!parport_SPP_supported (p)) + if (!parport_SPP_supported(p)) /* No port. */ goto out5; if (priv->ecr) @@ -2249,7 +2309,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, else parport_PS2_supported(p); - p->size = (p->modes & PARPORT_MODE_EPP)?8:3; + p->size = (p->modes & PARPORT_MODE_EPP) ? 8 : 3; printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base); if (p->base_hi && priv->ecr) @@ -2273,7 +2333,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, } } if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq - is mandatory (see above) */ + is mandatory (see above) */ p->dma = PARPORT_DMA_NONE; #ifdef CONFIG_PARPORT_PC_FIFO @@ -2290,16 +2350,23 @@ struct parport *parport_pc_probe_port(unsigned long int base, if (p->dma != PARPORT_DMA_NONE) { printk(", dma %d", p->dma); p->modes |= PARPORT_MODE_DMA; - } - else printk(", using FIFO"); - } - else + } else + printk(", using FIFO"); + } else /* We can't use the DMA channel after all. */ p->dma = PARPORT_DMA_NONE; #endif /* Allowed to use FIFO/DMA */ printk(" ["); -#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}} + +#define printmode(x) \ + {\ + if (p->modes & PARPORT_MODE_##x) {\ + printk("%s%s", f ? "," : "", #x);\ + f++;\ + } \ + } + { int f = 0; printmode(PCSPP); @@ -2311,10 +2378,10 @@ struct parport *parport_pc_probe_port(unsigned long int base, } #undef printmode #ifndef CONFIG_PARPORT_1284 - printk ("(,...)"); + printk("(,...)"); #endif /* CONFIG_PARPORT_1284 */ printk("]\n"); - if (probedirq != PARPORT_IRQ_NONE) + if (probedirq != PARPORT_IRQ_NONE) printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq); /* If No ECP release the ports grabbed above. */ @@ -2330,7 +2397,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, if (p->irq != PARPORT_IRQ_NONE) { if (request_irq(p->irq, parport_irq_handler, irqflags, p->name, p)) { - printk (KERN_WARNING "%s: irq %d in use, " + printk(KERN_WARNING "%s: irq %d in use, " "resorting to polled operation\n", p->name, p->irq); p->irq = PARPORT_IRQ_NONE; @@ -2340,8 +2407,8 @@ struct parport *parport_pc_probe_port(unsigned long int base, #ifdef CONFIG_PARPORT_PC_FIFO #ifdef HAS_DMA if (p->dma != PARPORT_DMA_NONE) { - if (request_dma (p->dma, p->name)) { - printk (KERN_WARNING "%s: dma %d in use, " + if (request_dma(p->dma, p->name)) { + printk(KERN_WARNING "%s: dma %d in use, " "resorting to PIO operation\n", p->name, p->dma); p->dma = PARPORT_DMA_NONE; @@ -2351,8 +2418,8 @@ struct parport *parport_pc_probe_port(unsigned long int base, PAGE_SIZE, &priv->dma_handle, GFP_KERNEL); - if (! priv->dma_buf) { - printk (KERN_WARNING "%s: " + if (!priv->dma_buf) { + printk(KERN_WARNING "%s: " "cannot get buffer for DMA, " "resorting to PIO operation\n", p->name); @@ -2371,10 +2438,10 @@ struct parport *parport_pc_probe_port(unsigned long int base, * Put the ECP detected port in PS2 mode. * Do this also for ports that have ECR but don't do ECP. */ - ECR_WRITE (p, 0x34); + ECR_WRITE(p, 0x34); parport_pc_write_data(p, 0); - parport_pc_data_forward (p); + parport_pc_data_forward(p); /* Now that we've told the sharing engine about the port, and found out its characteristics, let the high-level drivers @@ -2382,7 +2449,7 @@ struct parport *parport_pc_probe_port(unsigned long int base, spin_lock(&ports_lock); list_add(&priv->list, &ports_list); spin_unlock(&ports_lock); - parport_announce_port (p); + parport_announce_port(p); return p; @@ -2395,18 +2462,17 @@ out5: out4: parport_put_port(p); out3: - kfree (priv); + kfree(priv); out2: - kfree (ops); + kfree(ops); out1: if (pdev) platform_device_unregister(pdev); return NULL; } +EXPORT_SYMBOL(parport_pc_probe_port); -EXPORT_SYMBOL (parport_pc_probe_port); - -void parport_pc_unregister_port (struct parport *p) +void parport_pc_unregister_port(struct parport *p) { struct parport_pc_private *priv = p->private_data; struct parport_operations *ops = p->ops; @@ -2432,17 +2498,16 @@ void parport_pc_unregister_port (struct parport *p) priv->dma_buf, priv->dma_handle); #endif - kfree (p->private_data); + kfree(p->private_data); parport_put_port(p); - kfree (ops); /* hope no-one cached it */ + kfree(ops); /* hope no-one cached it */ } - -EXPORT_SYMBOL (parport_pc_unregister_port); +EXPORT_SYMBOL(parport_pc_unregister_port); #ifdef CONFIG_PCI /* ITE support maintained by Rich Liu */ -static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq, +static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma, const struct parport_pc_via_data *via) { @@ -2454,73 +2519,74 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq, int irq; int i; - DPRINTK (KERN_DEBUG "sio_ite_8872_probe()\n"); - - // make sure which one chip - for(i = 0; i < 5; i++) { + DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n"); + + /* make sure which one chip */ + for (i = 0; i < 5; i++) { base_res = request_region(inta_addr[i], 32, "it887x"); if (base_res) { int test; - pci_write_config_dword (pdev, 0x60, + pci_write_config_dword(pdev, 0x60, 0xe5000000 | inta_addr[i]); - pci_write_config_dword (pdev, 0x78, + pci_write_config_dword(pdev, 0x78, 0x00000000 | inta_addr[i]); - test = inb (inta_addr[i]); - if (test != 0xff) break; + test = inb(inta_addr[i]); + if (test != 0xff) + break; release_region(inta_addr[i], 0x8); } } - if(i >= 5) { - printk (KERN_INFO "parport_pc: cannot find ITE8872 INTA\n"); + if (i >= 5) { + printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n"); return 0; } - type = inb (inta_addr[i] + 0x18); + type = inb(inta_addr[i] + 0x18); type &= 0x0f; switch (type) { case 0x2: - printk (KERN_INFO "parport_pc: ITE8871 found (1P)\n"); + printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n"); ite8872set = 0x64200000; break; case 0xa: - printk (KERN_INFO "parport_pc: ITE8875 found (1P)\n"); + printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n"); ite8872set = 0x64200000; break; case 0xe: - printk (KERN_INFO "parport_pc: ITE8872 found (2S1P)\n"); + printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n"); ite8872set = 0x64e00000; break; case 0x6: - printk (KERN_INFO "parport_pc: ITE8873 found (1S)\n"); + printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n"); return 0; case 0x8: - DPRINTK (KERN_DEBUG "parport_pc: ITE8874 found (2S)\n"); + DPRINTK(KERN_DEBUG "parport_pc: ITE8874 found (2S)\n"); return 0; default: - printk (KERN_INFO "parport_pc: unknown ITE887x\n"); - printk (KERN_INFO "parport_pc: please mail 'lspci -nvv' " + printk(KERN_INFO "parport_pc: unknown ITE887x\n"); + printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' " "output to Rich.Liu@ite.com.tw\n"); return 0; } - pci_read_config_byte (pdev, 0x3c, &ite8872_irq); - pci_read_config_dword (pdev, 0x1c, &ite8872_lpt); + pci_read_config_byte(pdev, 0x3c, &ite8872_irq); + pci_read_config_dword(pdev, 0x1c, &ite8872_lpt); ite8872_lpt &= 0x0000ff00; - pci_read_config_dword (pdev, 0x20, &ite8872_lpthi); + pci_read_config_dword(pdev, 0x20, &ite8872_lpthi); ite8872_lpthi &= 0x0000ff00; - pci_write_config_dword (pdev, 0x6c, 0xe3000000 | ite8872_lpt); - pci_write_config_dword (pdev, 0x70, 0xe3000000 | ite8872_lpthi); - pci_write_config_dword (pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt); - // SET SPP&EPP , Parallel Port NO DMA , Enable All Function - // SET Parallel IRQ - pci_write_config_dword (pdev, 0x9c, + pci_write_config_dword(pdev, 0x6c, 0xe3000000 | ite8872_lpt); + pci_write_config_dword(pdev, 0x70, 0xe3000000 | ite8872_lpthi); + pci_write_config_dword(pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt); + /* SET SPP&EPP , Parallel Port NO DMA , Enable All Function */ + /* SET Parallel IRQ */ + pci_write_config_dword(pdev, 0x9c, ite8872set | (ite8872_irq * 0x11111)); - DPRINTK (KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq); - DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n", + DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq); + DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n", ite8872_lpt); - DPRINTK (KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n", + DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n", ite8872_lpthi); /* Let the user (or defaults) steer us away from interrupts */ @@ -2532,14 +2598,14 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq, * Release the resource so that parport_pc_probe_port can get it. */ release_resource(base_res); - if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi, + if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi, irq, PARPORT_DMA_NONE, &pdev->dev, 0)) { - printk (KERN_INFO + printk(KERN_INFO "parport_pc: ITE 8872 parallel port: io=0x%X", - ite8872_lpt); + ite8872_lpt); if (irq != PARPORT_IRQ_NONE) - printk (", irq=%d", irq); - printk ("\n"); + printk(", irq=%d", irq); + printk("\n"); return 1; } @@ -2548,7 +2614,7 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq, /* VIA 8231 support by Pavel Fedin based on VIA 686a support code by Jeff Garzik */ -static int __devinitdata parport_init_mode = 0; +static int __devinitdata parport_init_mode; /* Data for two known VIA chips */ static struct parport_pc_via_data via_686a_data __devinitdata = { @@ -2570,7 +2636,7 @@ static struct parport_pc_via_data via_8231_data __devinitdata = { 0xF6 }; -static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, +static int __devinit sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma, const struct parport_pc_via_data *via) { @@ -2582,38 +2648,38 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n"); - switch(parport_init_mode) - { + switch (parport_init_mode) { case 1: - printk(KERN_DEBUG "parport_pc: setting SPP mode\n"); - siofunc = VIA_FUNCTION_PARPORT_SPP; - break; + printk(KERN_DEBUG "parport_pc: setting SPP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_SPP; + break; case 2: - printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n"); - siofunc = VIA_FUNCTION_PARPORT_SPP; - ppcontrol = VIA_PARPORT_BIDIR; - break; + printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n"); + siofunc = VIA_FUNCTION_PARPORT_SPP; + ppcontrol = VIA_PARPORT_BIDIR; + break; case 3: - printk(KERN_DEBUG "parport_pc: setting EPP mode\n"); - siofunc = VIA_FUNCTION_PARPORT_EPP; - ppcontrol = VIA_PARPORT_BIDIR; - have_epp = 1; - break; + printk(KERN_DEBUG "parport_pc: setting EPP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_EPP; + ppcontrol = VIA_PARPORT_BIDIR; + have_epp = 1; + break; case 4: - printk(KERN_DEBUG "parport_pc: setting ECP mode\n"); - siofunc = VIA_FUNCTION_PARPORT_ECP; - ppcontrol = VIA_PARPORT_BIDIR; - break; + printk(KERN_DEBUG "parport_pc: setting ECP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_ECP; + ppcontrol = VIA_PARPORT_BIDIR; + break; case 5: - printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n"); - siofunc = VIA_FUNCTION_PARPORT_ECP; - ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP; - have_epp = 1; - break; - default: - printk(KERN_DEBUG "parport_pc: probing current configuration\n"); - siofunc = VIA_FUNCTION_PROBE; - break; + printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n"); + siofunc = VIA_FUNCTION_PARPORT_ECP; + ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP; + have_epp = 1; + break; + default: + printk(KERN_DEBUG + "parport_pc: probing current configuration\n"); + siofunc = VIA_FUNCTION_PROBE; + break; } /* * unlock super i/o configuration @@ -2624,38 +2690,36 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, /* Bits 1-0: Parallel Port Mode / Enable */ outb(via->viacfg_function, VIA_CONFIG_INDEX); - tmp = inb (VIA_CONFIG_DATA); + tmp = inb(VIA_CONFIG_DATA); /* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */ outb(via->viacfg_parport_control, VIA_CONFIG_INDEX); - tmp2 = inb (VIA_CONFIG_DATA); - if (siofunc == VIA_FUNCTION_PROBE) - { - siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE; - ppcontrol = tmp2; + tmp2 = inb(VIA_CONFIG_DATA); + if (siofunc == VIA_FUNCTION_PROBE) { + siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE; + ppcontrol = tmp2; + } else { + tmp &= ~VIA_FUNCTION_PARPORT_DISABLE; + tmp |= siofunc; + outb(via->viacfg_function, VIA_CONFIG_INDEX); + outb(tmp, VIA_CONFIG_DATA); + tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP); + tmp2 |= ppcontrol; + outb(via->viacfg_parport_control, VIA_CONFIG_INDEX); + outb(tmp2, VIA_CONFIG_DATA); } - else - { - tmp &= ~VIA_FUNCTION_PARPORT_DISABLE; - tmp |= siofunc; - outb(via->viacfg_function, VIA_CONFIG_INDEX); - outb(tmp, VIA_CONFIG_DATA); - tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP); - tmp2 |= ppcontrol; - outb(via->viacfg_parport_control, VIA_CONFIG_INDEX); - outb(tmp2, VIA_CONFIG_DATA); - } - + /* Parallel Port I/O Base Address, bits 9-2 */ outb(via->viacfg_parport_base, VIA_CONFIG_INDEX); port1 = inb(VIA_CONFIG_DATA) << 2; - - printk (KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",port1); - if ((port1 == 0x3BC) && have_epp) - { - outb(via->viacfg_parport_base, VIA_CONFIG_INDEX); - outb((0x378 >> 2), VIA_CONFIG_DATA); - printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n"); - port1 = 0x378; + + printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n", + port1); + if (port1 == 0x3BC && have_epp) { + outb(via->viacfg_parport_base, VIA_CONFIG_INDEX); + outb((0x378 >> 2), VIA_CONFIG_DATA); + printk(KERN_DEBUG + "parport_pc: Parallel port base changed to 0x378\n"); + port1 = 0x378; } /* @@ -2669,36 +2733,39 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n"); return 0; } - + /* Bits 7-4: PnP Routing for Parallel Port IRQ */ pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp); irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4); - if (siofunc == VIA_FUNCTION_PARPORT_ECP) - { - /* Bits 3-2: PnP Routing for Parallel Port DMA */ - pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp); - dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2); - } - else - /* if ECP not enabled, DMA is not enabled, assumed bogus 'dma' value */ - dma = PARPORT_DMA_NONE; + if (siofunc == VIA_FUNCTION_PARPORT_ECP) { + /* Bits 3-2: PnP Routing for Parallel Port DMA */ + pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp); + dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2); + } else + /* if ECP not enabled, DMA is not enabled, assumed + bogus 'dma' value */ + dma = PARPORT_DMA_NONE; /* Let the user (or defaults) steer us away from interrupts and DMA */ if (autoirq == PARPORT_IRQ_NONE) { - irq = PARPORT_IRQ_NONE; - dma = PARPORT_DMA_NONE; + irq = PARPORT_IRQ_NONE; + dma = PARPORT_DMA_NONE; } if (autodma == PARPORT_DMA_NONE) - dma = PARPORT_DMA_NONE; + dma = PARPORT_DMA_NONE; switch (port1) { - case 0x3bc: port2 = 0x7bc; break; - case 0x378: port2 = 0x778; break; - case 0x278: port2 = 0x678; break; + case 0x3bc: + port2 = 0x7bc; break; + case 0x378: + port2 = 0x778; break; + case 0x278: + port2 = 0x678; break; default: - printk(KERN_INFO "parport_pc: Weird VIA parport base 0x%X, ignoring\n", - port1); + printk(KERN_INFO + "parport_pc: Weird VIA parport base 0x%X, ignoring\n", + port1); return 0; } @@ -2716,17 +2783,17 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, } /* finally, do the probe with values obtained */ - if (parport_pc_probe_port (port1, port2, irq, dma, &pdev->dev, 0)) { - printk (KERN_INFO + if (parport_pc_probe_port(port1, port2, irq, dma, &pdev->dev, 0)) { + printk(KERN_INFO "parport_pc: VIA parallel port: io=0x%X", port1); if (irq != PARPORT_IRQ_NONE) - printk (", irq=%d", irq); + printk(", irq=%d", irq); if (dma != PARPORT_DMA_NONE) - printk (", dma=%d", dma); - printk ("\n"); + printk(", dma=%d", dma); + printk("\n"); return 1; } - + printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n", port1, irq, dma); return 0; @@ -2734,8 +2801,8 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, enum parport_pc_sio_types { - sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */ - sio_via_8231, /* Via VT8231 south bridge integrated Super IO */ + sio_via_686a = 0, /* Via VT82C686A motherboard Super I/O */ + sio_via_8231, /* Via VT8231 south bridge integrated Super IO */ sio_ite_8872, last_sio }; @@ -2806,15 +2873,15 @@ enum parport_pc_pci_cards { }; -/* each element directly indexed from enum list, above +/* each element directly indexed from enum list, above * (but offset by last_sio) */ static struct parport_pc_pci { int numports; struct { /* BAR (base address registers) numbers in the config - space header */ + space header */ int lo; - int hi; /* -1 if not there, >6 for offset-method (max - BAR is 6) */ + int hi; + /* -1 if not there, >6 for offset-method (max BAR is 6) */ } addr[4]; /* If set, this is called immediately after pci_enable_device. @@ -2859,7 +2926,7 @@ static struct parport_pc_pci { /* timedia_4018 */ { 2, { { 0, 1 }, { 2, 3 }, } }, /* timedia_9018a */ { 2, { { 0, 1 }, { 2, 3 }, } }, /* SYBA uses fixed offsets in - a 1K io window */ + a 1K io window */ /* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } }, /* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } }, /* titan_010l */ { 1, { { 3, -1 }, } }, @@ -2875,11 +2942,14 @@ static struct parport_pc_pci { /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } }, /* aks_0100 */ { 1, { { 0, -1 }, } }, /* mobility_pp */ { 1, { { 0, 1 }, } }, - /* netmos_9705 */ { 1, { { 0, -1 }, } }, /* untested */ - /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */ - /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, /* untested */ - /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* untested */ - /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */ + + /* The netmos entries below are untested */ + /* netmos_9705 */ { 1, { { 0, -1 }, } }, + /* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} }, + /* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} }, + /* netmos_9805 */ { 1, { { 0, -1 }, } }, + /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, + /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, }; @@ -2908,7 +2978,7 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_BOCA_IOPPAR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, boca_ioppar }, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0,0, plx_9050 }, + PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0, 0, plx_9050 }, /* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/ { 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a }, { 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h }, @@ -2942,7 +3012,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { { 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 }, { 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 }, /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/ - { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, /* AFAVLAB_TK9902 */ + /* AFAVLAB_TK9902 */ + { 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p}, { 0x14db, 0x2121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2p}, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952PP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_952 }, @@ -2985,14 +3056,14 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, { 0, } /* terminate list */ }; -MODULE_DEVICE_TABLE(pci,parport_pc_pci_tbl); +MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl); struct pci_parport_data { int num; struct parport *ports[2]; }; -static int parport_pc_pci_probe (struct pci_dev *dev, +static int parport_pc_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { int err, count, n, i = id->driver_data; @@ -3005,7 +3076,8 @@ static int parport_pc_pci_probe (struct pci_dev *dev, /* This is a PCI card */ i -= last_sio; count = 0; - if ((err = pci_enable_device (dev)) != 0) + err = pci_enable_device(dev); + if (err) return err; data = kmalloc(sizeof(struct pci_parport_data), GFP_KERNEL); @@ -3013,7 +3085,7 @@ static int parport_pc_pci_probe (struct pci_dev *dev, return -ENOMEM; if (cards[i].preinit_hook && - cards[i].preinit_hook (dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) { + cards[i].preinit_hook(dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) { kfree(data); return -ENODEV; } @@ -3023,25 +3095,25 @@ static int parport_pc_pci_probe (struct pci_dev *dev, int hi = cards[i].addr[n].hi; int irq; unsigned long io_lo, io_hi; - io_lo = pci_resource_start (dev, lo); + io_lo = pci_resource_start(dev, lo); io_hi = 0; if ((hi >= 0) && (hi <= 6)) - io_hi = pci_resource_start (dev, hi); + io_hi = pci_resource_start(dev, hi); else if (hi > 6) io_lo += hi; /* Reinterpret the meaning of - "hi" as an offset (see SYBA - def.) */ + "hi" as an offset (see SYBA + def.) */ /* TODO: test if sharing interrupts works */ irq = dev->irq; if (irq == IRQ_NONE) { - printk (KERN_DEBUG + printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n", parport_pc_pci_tbl[i + last_sio].vendor, parport_pc_pci_tbl[i + last_sio].device, io_lo, io_hi); irq = PARPORT_IRQ_NONE; } else { - printk (KERN_DEBUG + printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n", parport_pc_pci_tbl[i + last_sio].vendor, parport_pc_pci_tbl[i + last_sio].device, @@ -3058,7 +3130,7 @@ static int parport_pc_pci_probe (struct pci_dev *dev, data->num = count; if (cards[i].postinit_hook) - cards[i].postinit_hook (dev, count == 0); + cards[i].postinit_hook(dev, count == 0); if (count) { pci_set_drvdata(dev, data); @@ -3092,7 +3164,7 @@ static struct pci_driver parport_pc_pci_driver = { .remove = __devexit_p(parport_pc_pci_remove), }; -static int __init parport_pc_init_superio (int autoirq, int autodma) +static int __init parport_pc_init_superio(int autoirq, int autodma) { const struct pci_device_id *id; struct pci_dev *pdev = NULL; @@ -3103,8 +3175,9 @@ static int __init parport_pc_init_superio (int autoirq, int autodma) if (id == NULL || id->driver_data >= last_sio) continue; - if (parport_pc_superio_info[id->driver_data].probe - (pdev, autoirq, autodma,parport_pc_superio_info[id->driver_data].via)) { + if (parport_pc_superio_info[id->driver_data].probe( + pdev, autoirq, autodma, + parport_pc_superio_info[id->driver_data].via)) { ret++; } } @@ -3113,7 +3186,10 @@ static int __init parport_pc_init_superio (int autoirq, int autodma) } #else static struct pci_driver parport_pc_pci_driver; -static int __init parport_pc_init_superio(int autoirq, int autodma) {return 0;} +static int __init parport_pc_init_superio(int autoirq, int autodma) +{ + return 0; +} #endif /* CONFIG_PCI */ #ifdef CONFIG_PNP @@ -3126,44 +3202,45 @@ static const struct pnp_device_id parport_pc_pnp_tbl[] = { { } }; -MODULE_DEVICE_TABLE(pnp,parport_pc_pnp_tbl); +MODULE_DEVICE_TABLE(pnp, parport_pc_pnp_tbl); -static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *id) +static int parport_pc_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *id) { struct parport *pdata; unsigned long io_lo, io_hi; int dma, irq; - if (pnp_port_valid(dev,0) && - !(pnp_port_flags(dev,0) & IORESOURCE_DISABLED)) { - io_lo = pnp_port_start(dev,0); + if (pnp_port_valid(dev, 0) && + !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) { + io_lo = pnp_port_start(dev, 0); } else return -EINVAL; - if (pnp_port_valid(dev,1) && - !(pnp_port_flags(dev,1) & IORESOURCE_DISABLED)) { - io_hi = pnp_port_start(dev,1); + if (pnp_port_valid(dev, 1) && + !(pnp_port_flags(dev, 1) & IORESOURCE_DISABLED)) { + io_hi = pnp_port_start(dev, 1); } else io_hi = 0; - if (pnp_irq_valid(dev,0) && - !(pnp_irq_flags(dev,0) & IORESOURCE_DISABLED)) { - irq = pnp_irq(dev,0); + if (pnp_irq_valid(dev, 0) && + !(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED)) { + irq = pnp_irq(dev, 0); } else irq = PARPORT_IRQ_NONE; - if (pnp_dma_valid(dev,0) && - !(pnp_dma_flags(dev,0) & IORESOURCE_DISABLED)) { - dma = pnp_dma(dev,0); + if (pnp_dma_valid(dev, 0) && + !(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED)) { + dma = pnp_dma(dev, 0); } else dma = PARPORT_DMA_NONE; dev_info(&dev->dev, "reported by %s\n", dev->protocol->name); - if (!(pdata = parport_pc_probe_port(io_lo, io_hi, - irq, dma, &dev->dev, 0))) + pdata = parport_pc_probe_port(io_lo, io_hi, irq, dma, &dev->dev, 0); + if (pdata == NULL) return -ENODEV; - pnp_set_drvdata(dev,pdata); + pnp_set_drvdata(dev, pdata); return 0; } @@ -3205,7 +3282,7 @@ static struct platform_driver parport_pc_platform_driver = { /* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */ static int __devinit __attribute__((unused)) -parport_pc_find_isa_ports (int autoirq, int autodma) +parport_pc_find_isa_ports(int autoirq, int autodma) { int count = 0; @@ -3229,7 +3306,7 @@ parport_pc_find_isa_ports (int autoirq, int autodma) * autoirq is PARPORT_IRQ_NONE, PARPORT_IRQ_AUTO, or PARPORT_IRQ_PROBEONLY * autodma is PARPORT_DMA_NONE or PARPORT_DMA_AUTO */ -static void __init parport_pc_find_ports (int autoirq, int autodma) +static void __init parport_pc_find_ports(int autoirq, int autodma) { int count = 0, err; @@ -3263,11 +3340,18 @@ static void __init parport_pc_find_ports (int autoirq, int autodma) * syntax and keep in mind that code below is a cleaned up version. */ -static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { [0 ... PARPORT_PC_MAX_PORTS] = 0 }; -static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] = - { [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO }; -static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE }; -static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY }; +static int __initdata io[PARPORT_PC_MAX_PORTS+1] = { + [0 ... PARPORT_PC_MAX_PORTS] = 0 +}; +static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] = { + [0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO +}; +static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = { + [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE +}; +static int __initdata irqval[PARPORT_PC_MAX_PORTS] = { + [0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY +}; static int __init parport_parse_param(const char *s, int *val, int automatic, int none, int nofifo) @@ -3308,18 +3392,19 @@ static int __init parport_parse_dma(const char *dmastr, int *val) #ifdef CONFIG_PCI static int __init parport_init_mode_setup(char *str) { - printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n", str); - - if (!strcmp (str, "spp")) - parport_init_mode=1; - if (!strcmp (str, "ps2")) - parport_init_mode=2; - if (!strcmp (str, "epp")) - parport_init_mode=3; - if (!strcmp (str, "ecp")) - parport_init_mode=4; - if (!strcmp (str, "ecpepp")) - parport_init_mode=5; + printk(KERN_DEBUG + "parport_pc.c: Specified parameter parport_init_mode=%s\n", str); + + if (!strcmp(str, "spp")) + parport_init_mode = 1; + if (!strcmp(str, "ps2")) + parport_init_mode = 2; + if (!strcmp(str, "epp")) + parport_init_mode = 3; + if (!strcmp(str, "ecp")) + parport_init_mode = 4; + if (!strcmp(str, "ecpepp")) + parport_init_mode = 5; return 1; } #endif @@ -3343,7 +3428,8 @@ module_param(verbose_probing, int, 0644); #endif #ifdef CONFIG_PCI static char *init_mode; -MODULE_PARM_DESC(init_mode, "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)"); +MODULE_PARM_DESC(init_mode, + "Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)"); module_param(init_mode, charp, 0); #endif @@ -3374,7 +3460,7 @@ static int __init parse_parport_params(void) irqval[0] = val; break; default: - printk (KERN_WARNING + printk(KERN_WARNING "parport_pc: irq specified " "without base address. Use 'io=' " "to specify one\n"); @@ -3387,7 +3473,7 @@ static int __init parse_parport_params(void) dmaval[0] = val; break; default: - printk (KERN_WARNING + printk(KERN_WARNING "parport_pc: dma specified " "without base address. Use 'io=' " "to specify one\n"); @@ -3398,7 +3484,7 @@ static int __init parse_parport_params(void) #else -static int parport_setup_ptr __initdata = 0; +static int parport_setup_ptr __initdata; /* * Acceptable parameters: @@ -3409,7 +3495,7 @@ static int parport_setup_ptr __initdata = 0; * * IRQ/DMA may be numeric or 'auto' or 'none' */ -static int __init parport_setup (char *str) +static int __init parport_setup(char *str) { char *endptr; char *sep; @@ -3421,15 +3507,15 @@ static int __init parport_setup (char *str) return 1; } - if (!strncmp (str, "auto", 4)) { + if (!strncmp(str, "auto", 4)) { irqval[0] = PARPORT_IRQ_AUTO; dmaval[0] = PARPORT_DMA_AUTO; return 1; } - val = simple_strtoul (str, &endptr, 0); + val = simple_strtoul(str, &endptr, 0); if (endptr == str) { - printk (KERN_WARNING "parport=%s not understood\n", str); + printk(KERN_WARNING "parport=%s not understood\n", str); return 1; } @@ -3463,7 +3549,7 @@ static int __init parse_parport_params(void) return io[0] == PARPORT_DISABLE; } -__setup ("parport=", parport_setup); +__setup("parport=", parport_setup); /* * Acceptable parameters: @@ -3471,7 +3557,7 @@ __setup ("parport=", parport_setup); * parport_init_mode=[spp|ps2|epp|ecp|ecpepp] */ #ifdef CONFIG_PCI -__setup("parport_init_mode=",parport_init_mode_setup); +__setup("parport_init_mode=", parport_init_mode_setup); #endif #endif @@ -3495,13 +3581,13 @@ static int __init parport_pc_init(void) for (i = 0; i < PARPORT_PC_MAX_PORTS; i++) { if (!io[i]) break; - if ((io_hi[i]) == PARPORT_IOHI_AUTO) - io_hi[i] = 0x400 + io[i]; + if (io_hi[i] == PARPORT_IOHI_AUTO) + io_hi[i] = 0x400 + io[i]; parport_pc_probe_port(io[i], io_hi[i], - irqval[i], dmaval[i], NULL, 0); + irqval[i], dmaval[i], NULL, 0); } } else - parport_pc_find_ports (irqval[0], dmaval[0]); + parport_pc_find_ports(irqval[0], dmaval[0]); return 0; } @@ -3509,9 +3595,9 @@ static int __init parport_pc_init(void) static void __exit parport_pc_exit(void) { if (pci_registered_parport) - pci_unregister_driver (&parport_pc_pci_driver); + pci_unregister_driver(&parport_pc_pci_driver); if (pnp_registered_parport) - pnp_unregister_driver (&parport_pc_pnp_driver); + pnp_unregister_driver(&parport_pc_pnp_driver); platform_driver_unregister(&parport_pc_platform_driver); while (!list_empty(&ports_list)) { -- cgit v1.2.2 From 181bf1e815a2ad2a9a8b30ef6e92583d1530b255 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:08:10 +0100 Subject: parport_pc: clean up the modified while loops using for And tidy up a few bits coding style detectors missed Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/parport/parport_pc.c | 98 ++++++++++++++++++++++++++------------------ 1 file changed, 57 insertions(+), 41 deletions(-) diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index edf83e945853..151bf5bc8afe 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -626,7 +626,7 @@ static size_t parport_pc_fifo_write_block_dma(struct parport *port, unsigned long start = (unsigned long) buf; unsigned long end = (unsigned long) buf + length - 1; -dump_parport_state("enter fifo_write_block_dma", port); + dump_parport_state("enter fifo_write_block_dma", port); if (end < MAX_DMA_ADDRESS) { /* If it would cross a 64k boundary, cap it at the end. */ if ((start ^ end) & ~0xffffUL) @@ -737,7 +737,7 @@ false_alarm: if (dma_handle) dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE); -dump_parport_state("leave fifo_write_block_dma", port); + dump_parport_state("leave fifo_write_block_dma", port); return length - left; } #endif @@ -955,8 +955,8 @@ static size_t parport_pc_ecp_read_block_pio(struct parport *port, char *bufp = buf; port = port->physport; -DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n"); -dump_parport_state("enter fcn", port); + DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n"); + dump_parport_state("enter fcn", port); /* Special case: a timeout of zero means we cannot call schedule(). * Also if O_NONBLOCK is set then use the default implementation. */ @@ -1112,14 +1112,15 @@ false_alarm: if (ecrval & 0x02) { /* FIFO is full. */ -dump_parport_state("FIFO full", port); + dump_parport_state("FIFO full", port); insb(fifo, bufp, fifo_depth); bufp += fifo_depth; left -= fifo_depth; continue; } -DPRINTK(KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n"); + DPRINTK(KERN_DEBUG + "*** ecp_read_block_pio: reading one byte from the FIFO\n"); /* FIFO not filled. We will cycle this loop for a while * and either the peripheral will fill it faster, @@ -1135,7 +1136,7 @@ DPRINTK(KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n"); } port->ieee1284.phase = IEEE1284_PH_REV_IDLE; -dump_parport_state("rev idle2", port); + dump_parport_state("rev idle2", port); out_no_data: @@ -1163,7 +1164,7 @@ out_no_data: port->name, lost); } -dump_parport_state("fwd idle", port); + dump_parport_state("fwd idle", port); return length - left; } #endif /* 0 */ @@ -1216,10 +1217,23 @@ static const struct parport_operations parport_pc_ops = { }; #ifdef CONFIG_PARPORT_PC_SUPERIO + +static struct superio_struct *find_free_superio(void) +{ + int i; + for (i = 0; i < NR_SUPERIOS; i++) + if (superios[i].io == 0) + return &superios[i]; + return NULL; +} + + /* Super-IO chipset detection, Winbond, SMSC */ static void __devinit show_parconfig_smsc37c669(int io, int key) { - int cr1, cr4, cra, cr23, cr26, cr27, i = 0; + int cr1, cr4, cra, cr23, cr26, cr27; + struct superio_struct *s; + static const char *const modes[] = { "SPP and Bidirectional (PS/2)", "EPP and SPP", @@ -1272,30 +1286,29 @@ static void __devinit show_parconfig_smsc37c669(int io, int key) are related, however DMA can be 1 or 3, assume DMA_A=DMA1, DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */ if (cr23 * 4 >= 0x100) { /* if active */ - while ((i < NR_SUPERIOS) && (superios[i].io != 0)) - i++; - if (i == NR_SUPERIOS) { + s = find_free_superio(); + if (s == NULL) printk(KERN_INFO "Super-IO: too many chips!\n"); - } else { + else { int d; switch (cr23 * 4) { case 0x3bc: - superios[i].io = 0x3bc; - superios[i].irq = 7; + s->io = 0x3bc; + s->irq = 7; break; case 0x378: - superios[i].io = 0x378; - superios[i].irq = 7; + s->io = 0x378; + s->irq = 7; break; case 0x278: - superios[i].io = 0x278; - superios[i].irq = 5; + s->io = 0x278; + s->irq = 5; } d = (cr26 & 0x0f); if (d == 1 || d == 3) - superios[i].dma = d; + s->dma = d; else - superios[i].dma = PARPORT_DMA_NONE; + s->dma = PARPORT_DMA_NONE; } } } @@ -1303,7 +1316,8 @@ static void __devinit show_parconfig_smsc37c669(int io, int key) static void __devinit show_parconfig_winbond(int io, int key) { - int cr30, cr60, cr61, cr70, cr74, crf0, i = 0; + int cr30, cr60, cr61, cr70, cr74, crf0; + struct superio_struct *s; static const char *const modes[] = { "Standard (SPP) and Bidirectional(PS/2)", /* 0 */ "EPP-1.9 and SPP", @@ -1356,14 +1370,13 @@ static void __devinit show_parconfig_winbond(int io, int key) } if (cr30 & 0x01) { /* the settings can be interrogated later ... */ - while ((i < NR_SUPERIOS) && (superios[i].io != 0)) - i++; - if (i == NR_SUPERIOS) { + s = find_free_superio(); + if (s == NULL) printk(KERN_INFO "Super-IO: too many chips!\n"); - } else { - superios[i].io = (cr60<<8)|cr61; - superios[i].irq = cr70&0x0f; - superios[i].dma = (((cr74 & 0x07) > 3) ? + else { + s->io = (cr60 << 8) | cr61; + s->irq = cr70 & 0x0f; + s->dma = (((cr74 & 0x07) > 3) ? PARPORT_DMA_NONE : (cr74 & 0x07)); } } @@ -1618,25 +1631,28 @@ static void __devinit detect_and_report_it87(void) } #endif /* CONFIG_PARPORT_PC_SUPERIO */ -static int get_superio_dma(struct parport *p) +static struct superio_struct *find_superio(struct parport *p) { - int i = 0; + int i; + for (i = 0; i < NR_SUPERIOS; i++) + if (superios[i].io != p->base) + return &superios[i]; + return NULL; +} - while ((i < NR_SUPERIOS) && (superios[i].io != p->base)) - i++; - if (i != NR_SUPERIOS) - return superios[i].dma; +static int get_superio_dma(struct parport *p) +{ + struct superio_struct *s = find_superio(p); + if (s) + return s->dma; return PARPORT_DMA_NONE; } static int get_superio_irq(struct parport *p) { - int i = 0; - - while ((i < NR_SUPERIOS) && (superios[i].io != p->base)) - i++; - if (i != NR_SUPERIOS) - return superios[i].irq; + struct superio_struct *s = find_superio(p); + if (s) + return s->irq; return PARPORT_IRQ_NONE; } -- cgit v1.2.2 From 257a6e8cc7f9274f0af090494a3f1ee06548b5bd Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Thu, 11 Jun 2009 13:20:09 +0100 Subject: icom: fix compile errors when defining ICOM_TRACE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As it is, defining ICOM_TRACE produces some compile errors, as "parameter name omitted" and "redefinition of ‘trace’" This patch removes the wrong trace definition. Signed-off-by: Breno Leitao Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/icom.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index fd5fd23804bc..9f2891c2c4a2 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -137,7 +137,12 @@ static LIST_HEAD(icom_adapter_head); static spinlock_t icom_lock; #ifdef ICOM_TRACE -static inline void trace(struct icom_port *, char *, unsigned long) {}; +static inline void trace(struct icom_port *icom_port, char *trace_pt, + unsigned long trace_data) +{ + dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", + icom_port->port, trace_pt, trace_data); +} #else static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; #endif @@ -1647,15 +1652,6 @@ static void __exit icom_exit(void) module_init(icom_init); module_exit(icom_exit); -#ifdef ICOM_TRACE -static inline void trace(struct icom_port *icom_port, char *trace_pt, - unsigned long trace_data) -{ - dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", - icom_port->port, trace_pt, trace_data); -} -#endif - MODULE_AUTHOR("Michael Anderson "); MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); MODULE_SUPPORTED_DEVICE -- cgit v1.2.2 From 08e0992f60ad44025a8a8b8a821838ca4a562686 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 11 Jun 2009 13:21:24 +0100 Subject: serial: add support for the TI AR7 internal UART This patch adds support for the TI AR7 internal UART. Signed-off-by: Florian Fainelli Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 7 +++++++ include/linux/serial_core.h | 3 ++- 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index a0127e93ade0..fb867a9f55e9 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -287,6 +287,13 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO, }, + [PORT_AR7] = { + .name = "AR7", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, }; #if defined (CONFIG_SERIAL_8250_AU1X00) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 57a97e52e58d..48766ea845cf 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -41,7 +41,8 @@ #define PORT_XSCALE 15 #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ #define PORT_OCTEON 17 /* Cavium OCTEON internal UART */ -#define PORT_MAX_8250 17 /* max port ID */ +#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */ +#define PORT_MAX_8250 18 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed -- cgit v1.2.2 From b5c6794fe4256fd63664aa185c468647c28bfd4a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 11 Jun 2009 13:23:02 +0100 Subject: Blackfin SPORT UART: fix typo in sport_set_termios prototype Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_sport_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 529c0ff7952c..fd5cb9576a06 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -419,7 +419,7 @@ static void sport_shutdown(struct uart_port *port) } static void sport_set_termios(struct uart_port *port, - struct termios *termios, struct termios *old) + struct ktermios *termios, struct ktermios *old) { pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); uart_update_timeout(port, CS8 ,port->uartclk); -- cgit v1.2.2 From a19e8b205915b2925aca75b2d2bf0c3104c8be14 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 11 Jun 2009 13:23:42 +0100 Subject: Blackfin SPORT UART: fix data misses while using transmit frame sync SPORT transmit frame sync (TFS) isn't used as an electrical signal during normal SPORT UART emulation. However, it is useful in EIA RS-485 emulation as RS-485 Transceiver Driver Enable DE strobe. This patch configures: TFS to be active high in order to drive an DE strobe of an eventually connected RS-485 Transceiver. Late frame sync mode (LATFS) gating the entire TX shift cycle. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_sport_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index fd5cb9576a06..6687ccd422b7 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -149,7 +149,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate) int tclkdiv, tfsdiv, rclkdiv; /* Set TCR1 and TCR2 */ - SPORT_PUT_TCR1(up, (LTFS | ITFS | TFSR | TLSBIT | ITCLK)); + SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK)); SPORT_PUT_TCR2(up, 10); pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); -- cgit v1.2.2 From 4328e3e5ef1ae3427a4f6863aa65916a68ec2dd9 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 11 Jun 2009 13:37:11 +0100 Subject: Blackfin SPORT UART: rewrite inline assembly Hopefuly the new version is easier to read, but in the process it declares proper clobber lists and better constraints so that GCC can do a better job at allocating free registers. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_sport_uart.c | 54 +++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 25 deletions(-) diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 6687ccd422b7..34b4ae0fe760 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -101,15 +101,16 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) { pr_debug("%s value:%x\n", __func__, value); /* Place a Start and Stop bit */ - __asm__ volatile ( - "R2 = b#01111111100;\n\t" - "R3 = b#10000000001;\n\t" - "%0 <<= 2;\n\t" - "%0 = %0 & R2;\n\t" - "%0 = %0 | R3;\n\t" - :"=r"(value) - :"0"(value) - :"R2", "R3"); + __asm__ __volatile__ ( + "R2 = b#01111111100;" + "R3 = b#10000000001;" + "%0 <<= 2;" + "%0 = %0 & R2;" + "%0 = %0 | R3;" + : "=d"(value) + : "d"(value) + : "ASTAT", "R2", "R3" + ); pr_debug("%s value:%x\n", __func__, value); SPORT_PUT_TX(up, value); @@ -118,27 +119,30 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) static inline unsigned int rx_one_byte(struct sport_uart_port *up) { unsigned int value, extract; + u32 tmp_mask1, tmp_mask2, tmp_shift, tmp; value = SPORT_GET_RX32(up); pr_debug("%s value:%x\n", __func__, value); /* Extract 8 bits data */ - __asm__ volatile ( - "R5 = 0;\n\t" - "P0 = 8;\n\t" - "R1 = 0x1801(Z);\n\t" - "R3 = 0x0300(Z);\n\t" - "R4 = 0;\n\t" - "LSETUP(loop_s, loop_e) LC0 = P0;\nloop_s:\t" - "R2 = extract(%1, R1.L)(Z);\n\t" - "R2 <<= R4;\n\t" - "R5 = R5 | R2;\n\t" - "R1 = R1 - R3;\nloop_e:\t" - "R4 += 1;\n\t" - "%0 = R5;\n\t" - :"=r"(extract) - :"r"(value) - :"P0", "R1", "R2","R3","R4", "R5"); + __asm__ __volatile__ ( + "%[extr] = 0;" + "%[mask1] = 0x1801(Z);" + "%[mask2] = 0x0300(Z);" + "%[shift] = 0;" + "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];" + ".Lloop_s:" + "%[tmp] = extract(%[val], %[mask1].L)(Z);" + "%[tmp] <<= %[shift];" + "%[extr] = %[extr] | %[tmp];" + "%[mask1] = %[mask1] - %[mask2];" + ".Lloop_e:" + "%[shift] += 1;" + : [val]"=d"(value), [extr]"=d"(extract), [shift]"=d"(tmp_shift), [tmp]"=d"(tmp), + [mask1]"=d"(tmp_mask1), [mask2]"=d"(tmp_mask2) + : "d"(value), [lc]"a"(8) + : "ASTAT", "LB0", "LC0", "LT0" + ); pr_debug(" extract:%x\n", extract); return extract; -- cgit v1.2.2 From 8516c568f25666a012ec4c859e640a76fc9b6ec0 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 11 Jun 2009 13:38:16 +0100 Subject: Blackfin Serial Driver: fix error while transferring large files Ignore receiving data if new position is in the same line of current buffer tail and is small. This should decrease overruns. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index d86123e03391..65a4c07f6199 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -477,6 +477,15 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) spin_lock_irqsave(&uart->port.lock, flags); + /* 2D DMA RX buffer ring is used. Because curr_y_count and + * curr_x_count can't be read as an atomic operation, + * curr_y_count should be read before curr_x_count. When + * curr_x_count is read, curr_y_count may already indicate + * next buffer line. But, the position calculated here is + * still indicate the old line. The wrong position data may + * be smaller than current buffer tail, which cause garbages + * are received if it is not prohibit. + */ uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); x_pos = get_dma_curr_xcount(uart->rx_dma_channel); uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; @@ -487,7 +496,11 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) x_pos = 0; pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; - if (pos != uart->rx_dma_buf.tail) { + /* Ignore receiving data if new position is in the same line of + * current buffer tail and small. + */ + if (pos > uart->rx_dma_buf.tail || + uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { uart->rx_dma_buf.head = pos; bfin_serial_dma_rx_chars(uart); uart->rx_dma_buf.tail = uart->rx_dma_buf.head; @@ -532,11 +545,25 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; unsigned short irqstat; + int pos; spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); - bfin_serial_dma_rx_chars(uart); + + uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; + if (uart->rx_dma_nrows == DMA_RX_YCOUNT) + uart->rx_dma_nrows = 0; + + pos = uart->rx_dma_nrows * DMA_RX_XCOUNT; + if (pos > uart->rx_dma_buf.tail || + uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { + uart->rx_dma_buf.head = pos; + bfin_serial_dma_rx_chars(uart); + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; + } + spin_unlock(&uart->port.lock); return IRQ_HANDLED; -- cgit v1.2.2 From 7de7c55bf54dede2bd2262349fc7b558bcc8e413 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Thu, 11 Jun 2009 13:38:57 +0100 Subject: Blackfin Serial Driver: fix baudrate for early_printk Since we already setup the early console UART in arch/blackfin/kernel/early_printk.c, and common functions which are enabled from the .setup will override the proper settings later, don't fill in these structures. Otherwise we get mangled baudrate settings when using early_printk. Signed-off-by: Robin Getz Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 65a4c07f6199..dfae22d47bf7 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -1272,12 +1272,17 @@ static __init void early_serial_write(struct console *con, const char *s, } } +/* + * This should have a .setup or .early_setup in it, but then things get called + * without the command line options, and the baud rate gets messed up - so + * don't let the common infrastructure play with things. (see calls to setup + * & earlysetup in ./kernel/printk.c:register_console() + */ static struct __initdata console bfin_early_serial_console = { .name = "early_BFuart", .write = early_serial_write, .device = uart_console_device, .flags = CON_PRINTBUFFER, - .setup = bfin_serial_console_setup, .index = -1, .data = &bfin_serial_reg, }; -- cgit v1.2.2 From f9d36da9cdc2504cd9bb6034cfaba0673ce2d6df Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Thu, 11 Jun 2009 13:42:17 +0100 Subject: Blackfin Serial Driver: fix missing new lines when under load Add a SSYNC() into bfin_serial_dma_tx_chars() to ensure DMA registers are written with new data otherwise we might miss a byte or two when the system is under load. PIO mode is OK though. Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index dfae22d47bf7..676efdad3712 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -415,6 +415,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); set_dma_x_count(uart->tx_dma_channel, uart->tx_count); set_dma_x_modify(uart->tx_dma_channel, 1); + SSYNC(); enable_dma(uart->tx_dma_channel); UART_SET_IER(uart, ETBEI); -- cgit v1.2.2 From 35ff69357949cfff5c3d8e3038b77146872e3bd3 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 11 Jun 2009 13:42:57 +0100 Subject: Blackfin Serial Driver: handle irregular DMA register status in auto start mode This bug is caused by irregular behavior of DMA register CURR_X_COUNT and CURR_Y_COUNT when an auto restart uart rx DMA run to last byte in DMA buffer, trigger the interrupt and stay at this possiton. The status of current x and y is 0:7 instead of 512:8 or 0:8. The driver doesn't take care of this case when calculating the position. URL: http://blackfin.uclinux.org/gf/tracker/5063 Reported-by: Tomasz Motylewski Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 676efdad3712..854e96dfb070 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -490,7 +490,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); x_pos = get_dma_curr_xcount(uart->rx_dma_channel); uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT) + if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) uart->rx_dma_nrows = 0; x_pos = DMA_RX_XCOUNT - x_pos; if (x_pos == DMA_RX_XCOUNT) @@ -546,15 +546,16 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; unsigned short irqstat; - int pos; + int x_pos, pos; spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + x_pos = get_dma_curr_xcount(uart->rx_dma_channel); uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT) + if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) uart->rx_dma_nrows = 0; pos = uart->rx_dma_nrows * DMA_RX_XCOUNT; -- cgit v1.2.2 From 0efa4f2c944fabffc81918cc86d4d17dba39a021 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 11 Jun 2009 13:45:07 +0100 Subject: Blackfin Serial Driver: annotate anomalies 05000215 and 05000099 Add some comments for how these anomalies are addressed: 05000215 - UART TX Interrupt Masked Erroneously We always clear ETBEI within last UART TX interrupt to end a string. It is always set when starting a new tx transfer. 05000099 - UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time This anomaly affects driver only in POLL code where multi bits of UART_LSR are checked. It doesn't affect current bfin_5xx.c driver. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 854e96dfb070..ab583ef3a305 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -330,6 +330,11 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) /* Clear TFI bit */ UART_PUT_LSR(uart, TFI); #endif + /* Anomaly notes: + * 05000215 - we always clear ETBEI within last UART TX + * interrupt to end a string. It is always set + * when start a new tx. + */ UART_CLEAR_IER(uart, ETBEI); return; } @@ -528,6 +533,11 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { disable_dma(uart->tx_dma_channel); clear_dma_irqstat(uart->tx_dma_channel); + /* Anomaly notes: + * 05000215 - we always clear ETBEI within last UART TX + * interrupt to end a string. It is always set + * when start a new tx. + */ UART_CLEAR_IER(uart, ETBEI); xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); uart->port.icount.tx += uart->tx_count; @@ -969,6 +979,10 @@ static void bfin_serial_reset_irda(struct uart_port *port) } #ifdef CONFIG_CONSOLE_POLL +/* Anomaly notes: + * 05000099 - Because we only use THRE in poll_put and DR in poll_get, + * losing other bits of UART_LSR is not a problem here. + */ static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -- cgit v1.2.2 From 84507794a9d5d4decd6bc9c111480076dba0d301 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 11 Jun 2009 13:50:20 +0100 Subject: Blackfin Serial Driver: handle anomaly 05000231 05000231 - UART STB Bit Incorrectly Affects Receiver Setting For processors affected by this, we cannot safely allow CSTOPB to be set as the UART will then be unable to properly clock in bytes. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index ab583ef3a305..64603f5bb703 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -828,8 +828,16 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, __func__); } - if (termios->c_cflag & CSTOPB) - lcr |= STB; + /* Anomaly notes: + * 05000231 - STOP bit is always set to 1 whatever the user is set. + */ + if (termios->c_cflag & CSTOPB) { + if (ANOMALY_05000231) + printk(KERN_WARNING "STOP bits other than 1 is not " + "supported in case of anomaly 05000231.\n"); + else + lcr |= STB; + } if (termios->c_cflag & PARENB) lcr |= PEN; if (!(termios->c_cflag & PARODD)) -- cgit v1.2.2 From 2860b7911137eabb01c159abefb506e538ff3cb7 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 11 Jun 2009 13:51:33 +0100 Subject: Blackfin Serial Driver: disable dma rx interrupt only rather than all irqs The UART RX handling code isn't exactly speeding, so don't go disabling all interrupts when processing the buffer. Just disable the relevant DMA interrupt. This greatly improves latency of the system when utilizing the UART. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 64603f5bb703..e2f6b1bfac98 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -479,9 +479,9 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { int x_pos, pos; - unsigned long flags; - spin_lock_irqsave(&uart->port.lock, flags); + dma_disable_irq(uart->rx_dma_channel); + spin_lock_bh(&uart->port.lock); /* 2D DMA RX buffer ring is used. Because curr_y_count and * curr_x_count can't be read as an atomic operation, @@ -512,7 +512,8 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - spin_unlock_irqrestore(&uart->port.lock, flags); + spin_unlock_bh(&uart->port.lock); + dma_enable_irq(uart->rx_dma_channel); mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); } -- cgit v1.2.2 From b7c7cbc898e8a97829f33ad3bcd1b5e91690d8f4 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Thu, 11 Jun 2009 13:52:31 +0100 Subject: USB: CP210X Add device IDs Signed-off-by: Craig Shelley Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/cp210x.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index d9f586dc6ecc..ac4944a81521 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -57,13 +57,16 @@ static int debug; static struct usb_device_id id_table [] = { { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ + { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ + { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */ { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ + { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */ { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ @@ -84,10 +87,12 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ + { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ @@ -98,7 +103,9 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */ { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */ { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */ + { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ + { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ -- cgit v1.2.2 From 93ef1f1fbce37f14666e4856ff933d4a1b735d02 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Thu, 11 Jun 2009 13:53:30 +0100 Subject: USB: CP210X Use official request code definitions The CP210X driver was developed without official device specifications. This has lead to an incorrect assumption that all GET request codes are equal to the corresponding SET request code +1. This patch removes this incorrect assumption, and uses request code definitions based on the updated GPL driver from SiLabs. This modification is needed before extended functionality such as GPIO on CP2103 can be supported. Signed-off-by: Craig Shelley Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/cp210x.c | 98 ++++++++++++++++++++++++++------------------- 1 file changed, 56 insertions(+), 42 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index ac4944a81521..b50f27fa11d0 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -27,7 +27,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.08" +#define DRIVER_VERSION "v0.09" #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" /* @@ -144,23 +144,40 @@ static struct usb_serial_driver cp2101_device = { #define REQTYPE_HOST_TO_DEVICE 0x41 #define REQTYPE_DEVICE_TO_HOST 0xc1 -/* Config SET requests. To GET, add 1 to the request number */ -#define CP2101_UART 0x00 /* Enable / Disable */ -#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */ -#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */ -#define CP2101_BREAK 0x05 /* On / Off */ -#define CP2101_CONTROL 0x07 /* Flow control line states */ -#define CP2101_MODEMCTL 0x13 /* Modem controls */ -#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */ - -/* CP2101_UART */ +/* Config request codes */ +#define CP210X_IFC_ENABLE 0x00 +#define CP210X_SET_BAUDDIV 0x01 +#define CP210X_GET_BAUDDIV 0x02 +#define CP210X_SET_LINE_CTL 0x03 +#define CP210X_GET_LINE_CTL 0x04 +#define CP210X_SET_BREAK 0x05 +#define CP210X_IMM_CHAR 0x06 +#define CP210X_SET_MHS 0x07 +#define CP210X_GET_MDMSTS 0x08 +#define CP210X_SET_XON 0x09 +#define CP210X_SET_XOFF 0x0A +#define CP210X_SET_EVENTMASK 0x0B +#define CP210X_GET_EVENTMASK 0x0C +#define CP210X_SET_CHAR 0x0D +#define CP210X_GET_CHARS 0x0E +#define CP210X_GET_PROPS 0x0F +#define CP210X_GET_COMM_STATUS 0x10 +#define CP210X_RESET 0x11 +#define CP210X_PURGE 0x12 +#define CP210X_SET_FLOW 0x13 +#define CP210X_GET_FLOW 0x14 +#define CP210X_EMBED_EVENTS 0x15 +#define CP210X_GET_EVENTSTATE 0x16 +#define CP210X_SET_CHARS 0x19 + +/* CP210X_IFC_ENABLE */ #define UART_ENABLE 0x0001 #define UART_DISABLE 0x0000 -/* CP2101_BAUDRATE */ +/* CP210X_(SET|GET)_BAUDDIV */ #define BAUD_RATE_GEN_FREQ 0x384000 -/* CP2101_BITS */ +/* CP210X_(SET|GET)_LINE_CTL */ #define BITS_DATA_MASK 0X0f00 #define BITS_DATA_5 0X0500 #define BITS_DATA_6 0X0600 @@ -180,11 +197,11 @@ static struct usb_serial_driver cp2101_device = { #define BITS_STOP_1_5 0x0001 #define BITS_STOP_2 0x0002 -/* CP2101_BREAK */ +/* CP210X_SET_BREAK */ #define BREAK_ON 0x0000 #define BREAK_OFF 0x0001 -/* CP2101_CONTROL */ +/* CP210X_(SET_MHS|GET_MDMSTS) */ #define CONTROL_DTR 0x0001 #define CONTROL_RTS 0x0002 #define CONTROL_CTS 0x0010 @@ -217,9 +234,6 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request, return -ENOMEM; } - /* For get requests, the request number must be incremented */ - request++; - /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), request, REQTYPE_DEVICE_TO_HOST, 0x0000, @@ -357,7 +371,7 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { + if (cp2101_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", __func__); return -EPROTO; @@ -415,7 +429,7 @@ static void cp2101_close(struct usb_serial_port *port) mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) - cp2101_set_config_single(port, CP2101_UART, UART_DISABLE); + cp2101_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); mutex_unlock(&port->serial->disc_mutex); } @@ -456,7 +470,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); + cp2101_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); /* Convert to baudrate */ if (baud) baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); @@ -466,7 +480,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, cflag = *cflagp; - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); cflag &= ~CSIZE; switch (bits & BITS_DATA_MASK) { case BITS_DATA_5: @@ -491,14 +505,14 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown number of data bits, using 8", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -521,20 +535,20 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, disabling parity)", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown parity mode, disabling parity", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -547,7 +561,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_STOP_2: dbg("%s - stop bits = 2", __func__); @@ -557,11 +571,11 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - Unknown number of stop bits, using 1 stop bit", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } - cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp2101_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); if (modem_ctl[0] & 0x0008) { dbg("%s - flow control = CRTSCTS", __func__); cflag |= CRTSCTS; @@ -594,7 +608,7 @@ static void cp2101_set_termios(struct tty_struct *tty, if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { dbg("%s - Setting baud rate to %d baud", __func__, baud); - if (cp2101_set_config_single(port, CP2101_BAUDRATE, + if (cp2101_set_config_single(port, CP210X_SET_BAUDDIV, ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { dbg("Baud rate requested not supported by device\n"); baud = tty_termios_baud_rate(old_termios); @@ -605,7 +619,7 @@ static void cp2101_set_termios(struct tty_struct *tty, /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { case CS5: @@ -635,13 +649,13 @@ static void cp2101_set_termios(struct tty_struct *tty, bits |= BITS_DATA_8; break; } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of data bits requested " "not supported by device\n"); } if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & PARODD) { @@ -652,13 +666,13 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - parity = EVEN", __func__); } } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Parity mode not supported " "by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; @@ -667,13 +681,13 @@ static void cp2101_set_termios(struct tty_struct *tty, bits |= BITS_STOP_1; dbg("%s - stop bits = 1", __func__); } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of stop bits requested " "not supported by device\n"); } if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { - cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp2101_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); @@ -693,7 +707,7 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); - cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp2101_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); } } @@ -731,7 +745,7 @@ static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file, dbg("%s - control = 0x%.4x", __func__, control); - return cp2101_set_config(port, CP2101_CONTROL, &control, 2); + return cp2101_set_config(port, CP210X_SET_MHS, &control, 2); } static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) @@ -742,7 +756,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP2101_CONTROL, &control, 1); + cp2101_get_config(port, CP210X_GET_MDMSTS, &control, 1); result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) |((control & CONTROL_RTS) ? TIOCM_RTS : 0) @@ -768,7 +782,7 @@ static void cp2101_break_ctl (struct tty_struct *tty, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __func__, state == BREAK_OFF ? "off" : "on"); - cp2101_set_config(port, CP2101_BREAK, &state, 2); + cp2101_set_config(port, CP210X_SET_BREAK, &state, 2); } static int cp2101_startup(struct usb_serial *serial) -- cgit v1.2.2 From 4cc27bd6d7d6750dba33b4ccb4585c00b8fca7d2 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Thu, 11 Jun 2009 13:54:40 +0100 Subject: USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley (Fixed some collisions merging) Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/cp210x.c | 194 ++++++++++++++++++++++---------------------- 1 file changed, 97 insertions(+), 97 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index b50f27fa11d0..16a154d3b2fe 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -1,5 +1,5 @@ /* - * Silicon Laboratories CP2101/CP2102 USB to RS232 serial adaptor driver + * Silicon Laboratories CP210x USB to RS232 serial adaptor driver * * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk) * @@ -28,29 +28,29 @@ * Version Information */ #define DRIVER_VERSION "v0.09" -#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" +#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver" /* * Function Prototypes */ -static int cp2101_open(struct tty_struct *, struct usb_serial_port *, +static int cp210x_open(struct tty_struct *, struct usb_serial_port *, struct file *); -static void cp2101_cleanup(struct usb_serial_port *); -static void cp2101_close(struct usb_serial_port *); -static void cp2101_get_termios(struct tty_struct *, +static void cp210x_cleanup(struct usb_serial_port *); +static void cp210x_close(struct usb_serial_port *); +static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *port); -static void cp2101_get_termios_port(struct usb_serial_port *port, +static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp); -static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *, +static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); -static int cp2101_tiocmget(struct tty_struct *, struct file *); -static int cp2101_tiocmset(struct tty_struct *, struct file *, +static int cp210x_tiocmget(struct tty_struct *, struct file *); +static int cp210x_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int); -static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *, +static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, unsigned int, unsigned int); -static void cp2101_break_ctl(struct tty_struct *, int); -static int cp2101_startup(struct usb_serial *); -static void cp2101_shutdown(struct usb_serial *); +static void cp210x_break_ctl(struct tty_struct *, int); +static int cp210x_startup(struct usb_serial *); +static void cp210x_shutdown(struct usb_serial *); static int debug; @@ -114,30 +114,30 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE(usb, id_table); -static struct usb_driver cp2101_driver = { - .name = "cp2101", +static struct usb_driver cp210x_driver = { + .name = "cp210x", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, .no_dynamic_id = 1, }; -static struct usb_serial_driver cp2101_device = { +static struct usb_serial_driver cp210x_device = { .driver = { .owner = THIS_MODULE, - .name = "cp2101", + .name = "cp210x", }, - .usb_driver = &cp2101_driver, + .usb_driver = &cp210x_driver, .id_table = id_table, .num_ports = 1, - .open = cp2101_open, - .close = cp2101_close, - .break_ctl = cp2101_break_ctl, - .set_termios = cp2101_set_termios, - .tiocmget = cp2101_tiocmget, - .tiocmset = cp2101_tiocmset, - .attach = cp2101_startup, - .shutdown = cp2101_shutdown, + .open = cp210x_open, + .close = cp210x_close, + .break_ctl = cp210x_break_ctl, + .set_termios = cp210x_set_termios, + .tiocmget = cp210x_tiocmget, + .tiocmset = cp210x_tiocmset, + .attach = cp210x_startup, + .shutdown = cp210x_shutdown, }; /* Config request types */ @@ -212,13 +212,13 @@ static struct usb_serial_driver cp2101_device = { #define CONTROL_WRITE_RTS 0x0200 /* - * cp2101_get_config - * Reads from the CP2101 configuration registers + * cp210x_get_config + * Reads from the CP210x configuration registers * 'size' is specified in bytes. * 'data' is a pointer to a pre-allocated array of integers large * enough to hold 'size' bytes (with 4 bytes to each integer) */ -static int cp2101_get_config(struct usb_serial_port *port, u8 request, +static int cp210x_get_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; @@ -256,12 +256,12 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request, } /* - * cp2101_set_config - * Writes to the CP2101 configuration registers + * cp210x_set_config + * Writes to the CP210x configuration registers * Values less than 16 bits wide are sent directly * 'size' is specified in bytes. */ -static int cp2101_set_config(struct usb_serial_port *port, u8 request, +static int cp210x_set_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; @@ -312,21 +312,21 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request, } /* - * cp2101_set_config_single - * Convenience function for calling cp2101_set_config on single data values + * cp210x_set_config_single + * Convenience function for calling cp210x_set_config on single data values * without requiring an integer pointer */ -static inline int cp2101_set_config_single(struct usb_serial_port *port, +static inline int cp210x_set_config_single(struct usb_serial_port *port, u8 request, unsigned int data) { - return cp2101_set_config(port, request, &data, 2); + return cp210x_set_config(port, request, &data, 2); } /* - * cp2101_quantise_baudrate + * cp210x_quantise_baudrate * Quantises the baud rate as per AN205 Table 1 */ -static unsigned int cp2101_quantise_baudrate(unsigned int baud) { +static unsigned int cp210x_quantise_baudrate(unsigned int baud) { if (baud <= 56) baud = 0; else if (baud <= 300) baud = 300; else if (baud <= 600) baud = 600; @@ -363,7 +363,7 @@ static unsigned int cp2101_quantise_baudrate(unsigned int baud) { return baud; } -static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, +static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; @@ -371,7 +371,7 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - if (cp2101_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) { + if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", __func__); return -EPROTO; @@ -393,17 +393,17 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, } /* Configure the termios structure */ - cp2101_get_termios(tty, port); + cp210x_get_termios(tty, port); /* Set the DTR and RTS pins low */ - cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data + cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data : port, NULL, TIOCM_DTR | TIOCM_RTS, 0); return 0; } -static void cp2101_cleanup(struct usb_serial_port *port) +static void cp210x_cleanup(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; @@ -418,7 +418,7 @@ static void cp2101_cleanup(struct usb_serial_port *port) } } -static void cp2101_close(struct usb_serial_port *port) +static void cp210x_close(struct usb_serial_port *port) { dbg("%s - port %d", __func__, port->number); @@ -429,23 +429,23 @@ static void cp2101_close(struct usb_serial_port *port) mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) - cp2101_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); + cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); mutex_unlock(&port->serial->disc_mutex); } /* - * cp2101_get_termios + * cp210x_get_termios * Reads the baud rate, data bits, parity, stop bits and flow control mode * from the device, corrects any unsupported values, and configures the * termios structure to reflect the state of the device */ -static void cp2101_get_termios(struct tty_struct *tty, +static void cp210x_get_termios(struct tty_struct *tty, struct usb_serial_port *port) { unsigned int baud; if (tty) { - cp2101_get_termios_port(tty->driver_data, + cp210x_get_termios_port(tty->driver_data, &tty->termios->c_cflag, &baud); tty_encode_baud_rate(tty, baud, baud); } @@ -453,15 +453,15 @@ static void cp2101_get_termios(struct tty_struct *tty, else { unsigned int cflag; cflag = 0; - cp2101_get_termios_port(port, &cflag, &baud); + cp210x_get_termios_port(port, &cflag, &baud); } } /* - * cp2101_get_termios_port - * This is the heart of cp2101_get_termios which always uses a &usb_serial_port. + * cp210x_get_termios_port + * This is the heart of cp210x_get_termios which always uses a &usb_serial_port. */ -static void cp2101_get_termios_port(struct usb_serial_port *port, +static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp) { unsigned int cflag, modem_ctl[4]; @@ -470,17 +470,17 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); + cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); /* Convert to baudrate */ if (baud) - baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); + baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); dbg("%s - baud rate = %d", __func__, baud); *baudp = baud; cflag = *cflagp; - cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); cflag &= ~CSIZE; switch (bits & BITS_DATA_MASK) { case BITS_DATA_5: @@ -505,14 +505,14 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown number of data bits, using 8", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -535,20 +535,20 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, disabling parity)", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown parity mode, disabling parity", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -561,7 +561,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_STOP_2: dbg("%s - stop bits = 2", __func__); @@ -571,11 +571,11 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - Unknown number of stop bits, using 1 stop bit", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } - cp2101_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); + cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); if (modem_ctl[0] & 0x0008) { dbg("%s - flow control = CRTSCTS", __func__); cflag |= CRTSCTS; @@ -587,7 +587,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, *cflagp = cflag; } -static void cp2101_set_termios(struct tty_struct *tty, +static void cp210x_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { unsigned int cflag, old_cflag; @@ -602,13 +602,13 @@ static void cp2101_set_termios(struct tty_struct *tty, tty->termios->c_cflag &= ~CMSPAR; cflag = tty->termios->c_cflag; old_cflag = old_termios->c_cflag; - baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty)); + baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty)); /* If the baud rate is to be updated*/ if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { dbg("%s - Setting baud rate to %d baud", __func__, baud); - if (cp2101_set_config_single(port, CP210X_SET_BAUDDIV, + if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV, ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { dbg("Baud rate requested not supported by device\n"); baud = tty_termios_baud_rate(old_termios); @@ -619,7 +619,7 @@ static void cp2101_set_termios(struct tty_struct *tty, /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { case CS5: @@ -643,19 +643,19 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - data bits = 9", __func__); break;*/ default: - dbg("cp2101 driver does not " + dbg("cp210x driver does not " "support the number of bits requested," " using 8 bit mode\n"); bits |= BITS_DATA_8; break; } - if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of data bits requested " "not supported by device\n"); } if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { - cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & PARODD) { @@ -666,13 +666,13 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - parity = EVEN", __func__); } } - if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Parity mode not supported " "by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; @@ -681,13 +681,13 @@ static void cp2101_set_termios(struct tty_struct *tty, bits |= BITS_STOP_1; dbg("%s - stop bits = 1", __func__); } - if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of stop bits requested " "not supported by device\n"); } if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { - cp2101_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); + cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); @@ -707,19 +707,19 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); - cp2101_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); + cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); } } -static int cp2101_tiocmset (struct tty_struct *tty, struct file *file, +static int cp210x_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - return cp2101_tiocmset_port(port, file, set, clear); + return cp210x_tiocmset_port(port, file, set, clear); } -static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file, +static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear) { unsigned int control = 0; @@ -745,10 +745,10 @@ static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file, dbg("%s - control = 0x%.4x", __func__, control); - return cp2101_set_config(port, CP210X_SET_MHS, &control, 2); + return cp210x_set_config(port, CP210X_SET_MHS, &control, 2); } -static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) +static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; unsigned int control; @@ -756,7 +756,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP210X_GET_MDMSTS, &control, 1); + cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1); result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) |((control & CONTROL_RTS) ? TIOCM_RTS : 0) @@ -770,7 +770,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) return result; } -static void cp2101_break_ctl (struct tty_struct *tty, int break_state) +static void cp210x_break_ctl (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; unsigned int state; @@ -782,17 +782,17 @@ static void cp2101_break_ctl (struct tty_struct *tty, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __func__, state == BREAK_OFF ? "off" : "on"); - cp2101_set_config(port, CP210X_SET_BREAK, &state, 2); + cp210x_set_config(port, CP210X_SET_BREAK, &state, 2); } -static int cp2101_startup(struct usb_serial *serial) +static int cp210x_startup(struct usb_serial *serial) { - /* CP2101 buffers behave strangely unless device is reset */ + /* cp210x buffers behave strangely unless device is reset */ usb_reset_device(serial->dev); return 0; } -static void cp2101_shutdown(struct usb_serial *serial) +static void cp210x_shutdown(struct usb_serial *serial) { int i; @@ -800,21 +800,21 @@ static void cp2101_shutdown(struct usb_serial *serial) /* Stop reads and writes on all ports */ for (i = 0; i < serial->num_ports; ++i) - cp2101_cleanup(serial->port[i]); + cp210x_cleanup(serial->port[i]); } -static int __init cp2101_init(void) +static int __init cp210x_init(void) { int retval; - retval = usb_serial_register(&cp2101_device); + retval = usb_serial_register(&cp210x_device); if (retval) return retval; /* Failed to register */ - retval = usb_register(&cp2101_driver); + retval = usb_register(&cp210x_driver); if (retval) { /* Failed to register */ - usb_serial_deregister(&cp2101_device); + usb_serial_deregister(&cp210x_device); return retval; } @@ -824,14 +824,14 @@ static int __init cp2101_init(void) return 0; } -static void __exit cp2101_exit(void) +static void __exit cp210x_exit(void) { - usb_deregister(&cp2101_driver); - usb_serial_deregister(&cp2101_device); + usb_deregister(&cp210x_driver); + usb_serial_deregister(&cp210x_device); } -module_init(cp2101_init); -module_exit(cp2101_exit); +module_init(cp210x_init); +module_exit(cp210x_exit); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); -- cgit v1.2.2 From 557aaa7ffab639d0190b935a041b16ae44606342 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:55:34 +0100 Subject: ft232: support the ASYNC_LOW_LATENCY flag This allows users to use the standard setserial command with this FT232 feature as well as obscure chip specific interfaces we have now. We keep track of and respect the sysfs value for non-low-latency cases. In theory we could do smart stuff with VTIME and the like but this seems of questionable worth. Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120 Signed-off-by: Alan Cox --- drivers/usb/serial/ftdi_sio.c | 94 +++++++++++++++++++++++++++---------------- 1 file changed, 60 insertions(+), 34 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d9d87111f9a9..21c053c31b9e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -89,6 +89,7 @@ struct ftdi_private { int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ + unsigned int latency; /* latency setting in use */ spinlock_t tx_lock; /* spinlock for transmit state */ unsigned long tx_bytes; unsigned long tx_outstanding_bytes; @@ -1038,7 +1039,54 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) return rv; } +static int write_latency_timer(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + char buf[1]; + int rv = 0; + int l = priv->latency; + + if (priv->flags & ASYNC_LOW_LATENCY) + l = 1; + + dbg("%s: setting latency timer = %i", __func__, l); + + rv = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_LATENCY_TIMER_REQUEST, + FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, + l, priv->interface, + buf, 0, WDR_TIMEOUT); + if (rv < 0) + dev_err(&port->dev, "Unable to write latency timer: %i\n", rv); + return rv; +} + +static int read_latency_timer(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + unsigned short latency = 0; + int rv = 0; + + + dbg("%s", __func__); + + rv = usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + FTDI_SIO_GET_LATENCY_TIMER_REQUEST, + FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, + 0, priv->interface, + (char *) &latency, 1, WDR_TIMEOUT); + + if (rv < 0) { + dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); + return -EIO; + } + return latency; +} static int get_serial_info(struct usb_serial_port *port, struct serial_struct __user *retinfo) @@ -1098,6 +1146,7 @@ static int set_serial_info(struct tty_struct *tty, priv->custom_divisor = new_serial.custom_divisor; tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + write_latency_timer(port); check_and_exit: if ((old_priv.flags & ASYNC_SPD_MASK) != @@ -1193,27 +1242,13 @@ static ssize_t show_latency_timer(struct device *dev, { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); - struct usb_device *udev = port->serial->dev; - unsigned short latency = 0; - int rv = 0; - - - dbg("%s", __func__); - - rv = usb_control_msg(udev, - usb_rcvctrlpipe(udev, 0), - FTDI_SIO_GET_LATENCY_TIMER_REQUEST, - FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, - 0, priv->interface, - (char *) &latency, 1, WDR_TIMEOUT); - - if (rv < 0) { - dev_err(dev, "Unable to read latency timer: %i\n", rv); - return -EIO; - } - return sprintf(buf, "%i\n", latency); + if (priv->flags & ASYNC_LOW_LATENCY) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "%i\n", priv->latency); } + /* Write a new value of the latency timer, in units of milliseconds. */ static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf, @@ -1221,25 +1256,13 @@ static ssize_t store_latency_timer(struct device *dev, { struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); - struct usb_device *udev = port->serial->dev; - char buf[1]; int v = simple_strtoul(valbuf, NULL, 10); int rv = 0; - dbg("%s: setting latency timer = %i", __func__, v); - - rv = usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - FTDI_SIO_SET_LATENCY_TIMER_REQUEST, - FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, - v, priv->interface, - buf, 0, WDR_TIMEOUT); - - if (rv < 0) { - dev_err(dev, "Unable to write latency timer: %i\n", rv); + priv->latency = v; + rv = write_latency_timer(port); + if (rv < 0) return -EIO; - } - return count; } @@ -1393,6 +1416,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, priv); ftdi_determine_type(port); + read_latency_timer(port); create_sysfs_attrs(port); return 0; } @@ -1515,6 +1539,8 @@ static int ftdi_open(struct tty_struct *tty, if (tty) tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + write_latency_timer(port); + /* No error checking for this (will get errors later anyway) */ /* See ftdi_sio.h for description of what is reset */ usb_control_msg(dev, usb_sndctrlpipe(dev, 0), -- cgit v1.2.2 From 7f8d09eae26a8108406583192996561665b36371 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:56:16 +0100 Subject: tty: fix bluetooth scribbling on low latency flags Bluetooth shouldn't be doing this as most drivers don't support the flag, furthermore it shouldn't be needed with newer buffering. This becomes rather more visible as the locking fixes make the abuse of low_latency visible as spew on the users console/dmesg. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/bluetooth/hci_ldisc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 688015128594..4895f0e05322 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -463,7 +463,6 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file, clear_bit(HCI_UART_PROTO_SET, &hu->flags); return err; } - tty->low_latency = 1; } else return -EBUSY; break; -- cgit v1.2.2 From 7e9cd3a617414cfe74342659ceeb4e92975c1efa Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 13:57:01 +0100 Subject: ftdi_sio: don't override modem bits The new open/close logic handles DTR and friends, so don't do it in our own open routine as well. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/ftdi_sio.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 21c053c31b9e..683304d60615 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1556,11 +1556,6 @@ static int ftdi_open(struct tty_struct *tty, if (tty) ftdi_set_termios(tty, port, tty->termios); - /* FIXME: Flow control might be enabled, so it should be checked - - we have no control of defaults! */ - /* Turn on RTS and DTR since we are not flow controlling by default */ - set_mctrl(port, TIOCM_DTR | TIOCM_RTS); - /* Not throttled */ spin_lock_irqsave(&priv->rx_lock, flags); priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED); -- cgit v1.2.2 From 0b91421857414f525690ee452c0b0acb6ab1dba3 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 11 Jun 2009 14:01:45 +0100 Subject: tty: bfin_jtag_comm: emulate a TTY over the Blackfin EMUDAT/JTAG interface The Blackfin JTAG interface has a 4 byte generic data field (EMUDAT). With a little creative thinking, we can turn this into a TTY device. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/Kconfig | 13 ++ drivers/char/Makefile | 1 + drivers/char/bfin_jtag_comm.c | 365 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 379 insertions(+) create mode 100644 drivers/char/bfin_jtag_comm.c diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 735bbe2be51a..02ecfd5fa61c 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -97,6 +97,19 @@ config DEVKMEM kind of kernel debugging operations. When in doubt, say "N". +config BFIN_JTAG_COMM + tristate "Blackfin JTAG Communication" + depends on BLACKFIN + help + Add support for emulating a TTY device over the Blackfin JTAG. + + To compile this driver as a module, choose M here: the + module will be called bfin_jtag_comm. + +config BFIN_JTAG_COMM_CONSOLE + bool "Console on Blackfin JTAG" + depends on BFIN_JTAG_COMM=y + config SERIAL_NONSTANDARD bool "Non-standard serial port support" depends on HAS_IOMEM diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 9caf5b5ad1c0..189efcff08ce 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o obj-y += misc.o obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o selection.o keyboard.o +obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o obj-$(CONFIG_AUDIT) += tty_audit.o diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c new file mode 100644 index 000000000000..44c113d56045 --- /dev/null +++ b/drivers/char/bfin_jtag_comm.c @@ -0,0 +1,365 @@ +/* + * TTY over Blackfin JTAG Communication + * + * Copyright 2008-2009 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* See the Debug/Emulation chapter in the HRM */ +#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */ +#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */ +#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */ +#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */ + +#define DRV_NAME "bfin-jtag-comm" +#define DEV_NAME "ttyBFJC" + +#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); }) +#define debug(fmt, args...) pr_debug(DRV_NAME ": " fmt, ## args) + +static inline uint32_t bfin_write_emudat(uint32_t emudat) +{ + __asm__ __volatile__("emudat = %0;" : : "d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_read_emudat(void) +{ + uint32_t emudat; + __asm__ __volatile__("%0 = emudat;" : "=d"(emudat)); + return emudat; +} + +static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d) +{ + return bfin_write_emudat((a << 0) | (b << 8) | (c << 16) | (d << 24)); +} + +#define CIRC_SIZE 2048 /* see comment in tty_io.c:do_tty_write() */ +#define CIRC_MASK (CIRC_SIZE - 1) +#define circ_empty(circ) ((circ)->head == (circ)->tail) +#define circ_free(circ) CIRC_SPACE((circ)->head, (circ)->tail, CIRC_SIZE) +#define circ_cnt(circ) CIRC_CNT((circ)->head, (circ)->tail, CIRC_SIZE) +#define circ_byte(circ, idx) ((circ)->buf[(idx) & CIRC_MASK]) + +static struct tty_driver *bfin_jc_driver; +static struct task_struct *bfin_jc_kthread; +static struct tty_struct * volatile bfin_jc_tty; +static unsigned long bfin_jc_count; +static DEFINE_MUTEX(bfin_jc_tty_mutex); +static volatile struct circ_buf bfin_jc_write_buf; + +static int +bfin_jc_emudat_manager(void *arg) +{ + uint32_t inbound_len = 0, outbound_len = 0; + + while (!kthread_should_stop()) { + /* no one left to give data to, so sleep */ + if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) { + debug("waiting for readers\n"); + __set_current_state(TASK_UNINTERRUPTIBLE); + schedule(); + __set_current_state(TASK_RUNNING); + } + + /* no data available, so just chill */ + if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) { + debug("waiting for data (in_len = %i) (circ: %i %i)\n", + inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head); + if (inbound_len) + schedule(); + else + schedule_timeout_interruptible(HZ); + continue; + } + + /* if incoming data is ready, eat it */ + if (bfin_read_DBGSTAT() & EMUDIF) { + struct tty_struct *tty; + mutex_lock(&bfin_jc_tty_mutex); + tty = (struct tty_struct *)bfin_jc_tty; + if (tty != NULL) { + uint32_t emudat = bfin_read_emudat(); + if (inbound_len == 0) { + debug("incoming length: 0x%08x\n", emudat); + inbound_len = emudat; + } else { + size_t num_chars = (4 <= inbound_len ? 4 : inbound_len); + debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars); + inbound_len -= num_chars; + tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars); + tty_flip_buffer_push(tty); + } + } + mutex_unlock(&bfin_jc_tty_mutex); + } + + /* if outgoing data is ready, post it */ + if (!(bfin_read_DBGSTAT() & EMUDOF) && !circ_empty(&bfin_jc_write_buf)) { + if (outbound_len == 0) { + outbound_len = circ_cnt(&bfin_jc_write_buf); + bfin_write_emudat(outbound_len); + debug("outgoing length: 0x%08x\n", outbound_len); + } else { + struct tty_struct *tty; + int tail = bfin_jc_write_buf.tail; + size_t ate = (4 <= outbound_len ? 4 : outbound_len); + uint32_t emudat = + bfin_write_emudat_chars( + circ_byte(&bfin_jc_write_buf, tail + 0), + circ_byte(&bfin_jc_write_buf, tail + 1), + circ_byte(&bfin_jc_write_buf, tail + 2), + circ_byte(&bfin_jc_write_buf, tail + 3) + ); + bfin_jc_write_buf.tail += ate; + outbound_len -= ate; + mutex_lock(&bfin_jc_tty_mutex); + tty = (struct tty_struct *)bfin_jc_tty; + if (tty) + tty_wakeup(tty); + mutex_unlock(&bfin_jc_tty_mutex); + debug(" outgoing data: 0x%08x (pushing %zu)\n", emudat, ate); + } + } + } + + __set_current_state(TASK_RUNNING); + return 0; +} + +static int +bfin_jc_open(struct tty_struct *tty, struct file *filp) +{ + mutex_lock(&bfin_jc_tty_mutex); + debug("open %lu\n", bfin_jc_count); + ++bfin_jc_count; + bfin_jc_tty = tty; + wake_up_process(bfin_jc_kthread); + mutex_unlock(&bfin_jc_tty_mutex); + return 0; +} + +static void +bfin_jc_close(struct tty_struct *tty, struct file *filp) +{ + mutex_lock(&bfin_jc_tty_mutex); + debug("close %lu\n", bfin_jc_count); + if (--bfin_jc_count == 0) + bfin_jc_tty = NULL; + wake_up_process(bfin_jc_kthread); + mutex_unlock(&bfin_jc_tty_mutex); +} + +/* XXX: we dont handle the put_char() case where we must handle count = 1 */ +static int +bfin_jc_circ_write(const unsigned char *buf, int count) +{ + int i; + count = min(count, circ_free(&bfin_jc_write_buf)); + debug("going to write chunk of %i bytes\n", count); + for (i = 0; i < count; ++i) + circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i]; + bfin_jc_write_buf.head += i; + return i; +} + +#ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE +# define acquire_console_sem() +# define release_console_sem() +#endif +static int +bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + int i; + acquire_console_sem(); + i = bfin_jc_circ_write(buf, count); + release_console_sem(); + wake_up_process(bfin_jc_kthread); + return i; +} + +static void +bfin_jc_flush_chars(struct tty_struct *tty) +{ + wake_up_process(bfin_jc_kthread); +} + +static int +bfin_jc_write_room(struct tty_struct *tty) +{ + return circ_free(&bfin_jc_write_buf); +} + +static int +bfin_jc_chars_in_buffer(struct tty_struct *tty) +{ + return circ_cnt(&bfin_jc_write_buf); +} + +static void +bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout) +{ + unsigned long expire = jiffies + timeout; + while (!circ_empty(&bfin_jc_write_buf)) { + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } +} + +static struct tty_operations bfin_jc_ops = { + .open = bfin_jc_open, + .close = bfin_jc_close, + .write = bfin_jc_write, + /*.put_char = bfin_jc_put_char,*/ + .flush_chars = bfin_jc_flush_chars, + .write_room = bfin_jc_write_room, + .chars_in_buffer = bfin_jc_chars_in_buffer, + .wait_until_sent = bfin_jc_wait_until_sent, +}; + +static int __init bfin_jc_init(void) +{ + int ret; + + bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME); + if (IS_ERR(bfin_jc_kthread)) + return PTR_ERR(bfin_jc_kthread); + + ret = -ENOMEM; + + bfin_jc_write_buf.head = bfin_jc_write_buf.tail = 0; + bfin_jc_write_buf.buf = kmalloc(CIRC_SIZE, GFP_KERNEL); + if (!bfin_jc_write_buf.buf) + goto err; + + bfin_jc_driver = alloc_tty_driver(1); + if (!bfin_jc_driver) + goto err; + + bfin_jc_driver->owner = THIS_MODULE; + bfin_jc_driver->driver_name = DRV_NAME; + bfin_jc_driver->name = DEV_NAME; + bfin_jc_driver->type = TTY_DRIVER_TYPE_SERIAL; + bfin_jc_driver->subtype = SERIAL_TYPE_NORMAL; + bfin_jc_driver->init_termios = tty_std_termios; + tty_set_operations(bfin_jc_driver, &bfin_jc_ops); + + ret = tty_register_driver(bfin_jc_driver); + if (ret) + goto err; + + pr_init(KERN_INFO DRV_NAME ": initialized\n"); + + return 0; + + err: + put_tty_driver(bfin_jc_driver); + kfree(bfin_jc_write_buf.buf); + kthread_stop(bfin_jc_kthread); + return ret; +} +module_init(bfin_jc_init); + +static void __exit bfin_jc_exit(void) +{ + kthread_stop(bfin_jc_kthread); + kfree(bfin_jc_write_buf.buf); + tty_unregister_driver(bfin_jc_driver); + put_tty_driver(bfin_jc_driver); +} +module_exit(bfin_jc_exit); + +#if defined(CONFIG_BFIN_JTAG_COMM_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +static void +bfin_jc_straight_buffer_write(const char *buf, unsigned count) +{ + unsigned ate = 0; + while (bfin_read_DBGSTAT() & EMUDOF) + continue; + bfin_write_emudat(count); + while (ate < count) { + while (bfin_read_DBGSTAT() & EMUDOF) + continue; + bfin_write_emudat_chars(buf[ate], buf[ate+1], buf[ate+2], buf[ate+3]); + ate += 4; + } +} +#endif + +#ifdef CONFIG_BFIN_JTAG_COMM_CONSOLE +static void +bfin_jc_console_write(struct console *co, const char *buf, unsigned count) +{ + if (bfin_jc_kthread == NULL) + bfin_jc_straight_buffer_write(buf, count); + else + bfin_jc_circ_write(buf, count); +} + +static struct tty_driver * +bfin_jc_console_device(struct console *co, int *index) +{ + *index = co->index; + return bfin_jc_driver; +} + +static struct console bfin_jc_console = { + .name = DEV_NAME, + .write = bfin_jc_console_write, + .device = bfin_jc_console_device, + .flags = CON_ANYTIME | CON_PRINTBUFFER, + .index = -1, +}; + +static int __init bfin_jc_console_init(void) +{ + register_console(&bfin_jc_console); + return 0; +} +console_initcall(bfin_jc_console_init); +#endif + +#ifdef CONFIG_EARLY_PRINTK +static void __init +bfin_jc_early_write(struct console *co, const char *buf, unsigned int count) +{ + bfin_jc_straight_buffer_write(buf, count); +} + +static struct __initdata console bfin_jc_early_console = { + .name = "early_BFJC", + .write = bfin_jc_early_write, + .flags = CON_ANYTIME | CON_PRINTBUFFER, + .index = -1, +}; + +struct console * __init +bfin_jc_early_init(unsigned int port, unsigned int cflag) +{ + return &bfin_jc_early_console; +} +#endif + +MODULE_AUTHOR("Mike Frysinger "); +MODULE_DESCRIPTION("TTY over Blackfin JTAG Communication"); +MODULE_LICENSE("GPL"); -- cgit v1.2.2 From 26a2e20f4a966bebc312836aeb4423fbfd4e33e2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 14:03:13 +0100 Subject: tty: Untangle termios and mm mutex dependencies Although this doesn't cause any problems it could potentially do so for future mmap using devices. No real work is needed to sort it out so untangle it before it causes problems Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ioctl.c | 75 +++++++++++++++++++++++++++++------------------- 1 file changed, 46 insertions(+), 29 deletions(-) diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 2401dbcbee9c..8116bb1c8f80 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -626,9 +626,25 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) return 0; } +static void copy_termios(struct tty_struct *tty, struct ktermios *kterm) +{ + mutex_lock(&tty->termios_mutex); + memcpy(kterm, tty->termios, sizeof(struct ktermios)); + mutex_unlock(&tty->termios_mutex); +} + +static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm) +{ + mutex_lock(&tty->termios_mutex); + memcpy(kterm, tty->termios_locked, sizeof(struct ktermios)); + mutex_unlock(&tty->termios_mutex); +} + static int get_termio(struct tty_struct *tty, struct termio __user *termio) { - if (kernel_termios_to_user_termio(termio, tty->termios)) + struct ktermios kterm; + copy_termios(tty, &kterm); + if (kernel_termios_to_user_termio(termio, &kterm)) return -EFAULT; return 0; } @@ -930,6 +946,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, struct tty_struct *real_tty; void __user *p = (void __user *)arg; int ret = 0; + struct ktermios kterm; + struct termiox ktermx; if (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER) @@ -965,23 +983,20 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, return set_termios(real_tty, p, TERMIOS_OLD); #ifndef TCGETS2 case TCGETS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios)) + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; #else case TCGETS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios)) + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TCGETS2: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios)) + copy_termios(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios2 __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TCSETSF2: return set_termios(real_tty, p, TERMIOS_FLUSH | TERMIOS_WAIT); @@ -1000,34 +1015,36 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, return set_termios(real_tty, p, TERMIOS_TERMIO); #ifndef TCGETS2 case TIOCGLCKTRMIOS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked)) + copy_termios_locked(real_tty, &kterm); + if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TIOCSLCKTRMIOS: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - mutex_lock(&real_tty->termios_mutex); - if (user_termios_to_kernel_termios(real_tty->termios_locked, + copy_termios_locked(real_tty, &kterm); + if (user_termios_to_kernel_termios(&kterm, (struct termios __user *) arg)) - ret = -EFAULT; + return -EFAULT; + mutex_lock(&real_tty->termios_mutex); + memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios)); mutex_unlock(&real_tty->termios_mutex); - return ret; + return 0; #else case TIOCGLCKTRMIOS: - mutex_lock(&real_tty->termios_mutex); - if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked)) + copy_termios_locked(real_tty, &kterm); + if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm)) ret = -EFAULT; - mutex_unlock(&real_tty->termios_mutex); return ret; case TIOCSLCKTRMIOS: if (!capable(CAP_SYS_ADMIN)) - ret = -EPERM; - mutex_lock(&real_tty->termios_mutex); - if (user_termios_to_kernel_termios_1(real_tty->termios_locked, + return -EPERM; + copy_termios_locked(real_tty, &kterm); + if (user_termios_to_kernel_termios_1(&kterm, (struct termios __user *) arg)) - ret = -EFAULT; + return -EFAULT; + mutex_lock(&real_tty->termios_mutex); + memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios)); mutex_unlock(&real_tty->termios_mutex); return ret; #endif @@ -1036,9 +1053,10 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, if (real_tty->termiox == NULL) return -EINVAL; mutex_lock(&real_tty->termios_mutex); - if (copy_to_user(p, real_tty->termiox, sizeof(struct termiox))) - ret = -EFAULT; + memcpy(&ktermx, real_tty->termiox, sizeof(struct termiox)); mutex_unlock(&real_tty->termios_mutex); + if (copy_to_user(p, &ktermx, sizeof(struct termiox))) + ret = -EFAULT; return ret; case TCSETX: return set_termiox(real_tty, p, 0); @@ -1048,10 +1066,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, return set_termiox(real_tty, p, TERMIOS_FLUSH); #endif case TIOCGSOFTCAR: - mutex_lock(&real_tty->termios_mutex); - ret = put_user(C_CLOCAL(real_tty) ? 1 : 0, + copy_termios(real_tty, &kterm); + ret = put_user((kterm.c_cflag & CLOCAL) ? 1 : 0, (int __user *)arg); - mutex_unlock(&real_tty->termios_mutex); return ret; case TIOCSSOFTCAR: if (get_user(arg, (unsigned int __user *) arg)) -- cgit v1.2.2 From 93d5581e20600593ec3236921b6620225fb76034 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 14:03:55 +0100 Subject: devpts: unregister the file system on error Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13429 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- fs/devpts/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c index c68edb969441..9b1d285f9fe6 100644 --- a/fs/devpts/inode.c +++ b/fs/devpts/inode.c @@ -557,8 +557,10 @@ static int __init init_devpts_fs(void) int err = register_filesystem(&devpts_fs_type); if (!err) { devpts_mnt = kern_mount(&devpts_fs_type); - if (IS_ERR(devpts_mnt)) + if (IS_ERR(devpts_mnt)) { err = PTR_ERR(devpts_mnt); + unregister_filesystem(&devpts_fs_type); + } } return err; } -- cgit v1.2.2 From e960bf73ddd73714bcfbadb1717e53ecda9924cb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 14:04:57 +0100 Subject: tty: Add URL for ttydev queue Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1979167c16dc..84285b5ba359 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -71,7 +71,7 @@ P: Person M: Mail patches to L: Mailing list that is relevant to this area W: Web-page with status/info -T: SCM tree type and location. Type is one of: git, hg, quilt. +T: SCM tree type and location. Type is one of: git, hg, quilt, stgit. S: Status, one of the following: Supported: Someone is actually paid to look after this. @@ -5630,6 +5630,7 @@ P: Alan Cox M: alan@lxorguk.ukuu.org.uk L: linux-kernel@vger.kernel.org S: Maintained +T: stgit http://zeniv.linux.org.uk/~alan/ttydev/ TULIP NETWORK DRIVERS P: Grant Grundler -- cgit v1.2.2 From 34aec591847c696339189b070cce2a11f901cfea Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Thu, 11 Jun 2009 14:05:39 +0100 Subject: serial: Added Timberdale UART driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Driver for the UART found in the Timberdale FPGA Signed-off-by: Richard Röjfors Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/Kconfig | 7 + drivers/serial/Makefile | 1 + drivers/serial/timbuart.c | 520 ++++++++++++++++++++++++++++++++++++++++++++ drivers/serial/timbuart.h | 58 +++++ include/linux/serial_core.h | 3 + 5 files changed, 589 insertions(+) create mode 100644 drivers/serial/timbuart.c create mode 100644 drivers/serial/timbuart.h diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 343e3a35b6a3..3391ef0d761d 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1433,4 +1433,11 @@ config SPORT_BAUD_RATE default 19200 if (SERIAL_SPORT_BAUD_RATE_19200) default 9600 if (SERIAL_SPORT_BAUD_RATE_9600) +config SERIAL_TIMBERDALE + tristate "Support for timberdale UART" + depends on MFD_TIMBERDALE + select SERIAL_CORE + ---help--- + Add support for UART controller on timberdale. + endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index d438eb2a73de..45a8658f54d5 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -77,3 +77,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o obj-$(CONFIG_SERIAL_QE) += ucc_uart.o +obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c new file mode 100644 index 000000000000..30ba3c4cc180 --- /dev/null +++ b/drivers/serial/timbuart.c @@ -0,0 +1,520 @@ +/* + * timbuart.c timberdale FPGA UART driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Timberdale FPGA UART + */ + +#include +#include +#include +#include +#include +#include + +#include "timbuart.h" + +struct timbuart_port { + struct uart_port port; + struct tasklet_struct tasklet; + int usedma; + u8 last_ier; + struct platform_device *dev; +}; + +static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800, + 921600, 1843200, 3250000}; + +static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier); + +static irqreturn_t timbuart_handleinterrupt(int irq, void *devid); + +static void timbuart_stop_rx(struct uart_port *port) +{ + /* spin lock held by upper layer, disable all RX interrupts */ + u8 ier = ioread8(port->membase + TIMBUART_IER) & ~RXFLAGS; + iowrite8(ier, port->membase + TIMBUART_IER); +} + +static void timbuart_stop_tx(struct uart_port *port) +{ + /* spinlock held by upper layer, disable TX interrupt */ + u8 ier = ioread8(port->membase + TIMBUART_IER) & ~TXBAE; + iowrite8(ier, port->membase + TIMBUART_IER); +} + +static void timbuart_start_tx(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + + /* do not transfer anything here -> fire off the tasklet */ + tasklet_schedule(&uart->tasklet); +} + +static void timbuart_flush_buffer(struct uart_port *port) +{ + u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX; + + iowrite8(ctl, port->membase + TIMBUART_CTRL); + iowrite8(TXBF, port->membase + TIMBUART_ISR); +} + +static void timbuart_rx_chars(struct uart_port *port) +{ + struct tty_struct *tty = port->info->port.tty; + + while (ioread8(port->membase + TIMBUART_ISR) & RXDP) { + u8 ch = ioread8(port->membase + TIMBUART_RXFIFO); + port->icount.rx++; + tty_insert_flip_char(tty, ch, TTY_NORMAL); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(port->info->port.tty); + spin_lock(&port->lock); + + dev_dbg(port->dev, "%s - total read %d bytes\n", + __func__, port->icount.rx); +} + +static void timbuart_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + + while (!(ioread8(port->membase + TIMBUART_ISR) & TXBF) && + !uart_circ_empty(xmit)) { + iowrite8(xmit->buf[xmit->tail], + port->membase + TIMBUART_TXFIFO); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + dev_dbg(port->dev, + "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n", + __func__, + port->icount.tx, + ioread8(port->membase + TIMBUART_CTRL), + port->mctrl & TIOCM_RTS, + ioread8(port->membase + TIMBUART_BAUDRATE)); +} + +static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + struct circ_buf *xmit = &port->info->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + if (port->x_char) + return; + + if (isr & TXFLAGS) { + timbuart_tx_chars(port); + /* clear all TX interrupts */ + iowrite8(TXFLAGS, port->membase + TIMBUART_ISR); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + } else + /* Re-enable any tx interrupt */ + *ier |= uart->last_ier & TXFLAGS; + + /* enable interrupts if there are chars in the transmit buffer, + * Or if we delivered some bytes and want the almost empty interrupt + * we wake up the upper layer later when we got the interrupt + * to give it some time to go out... + */ + if (!uart_circ_empty(xmit)) + *ier |= TXBAE; + + dev_dbg(port->dev, "%s - leaving\n", __func__); +} + +void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier) +{ + if (isr & RXFLAGS) { + /* Some RX status is set */ + if (isr & RXBF) { + u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | + TIMBUART_CTRL_FLSHRX; + iowrite8(ctl, port->membase + TIMBUART_CTRL); + port->icount.overrun++; + } else if (isr & (RXDP)) + timbuart_rx_chars(port); + + /* ack all RX interrupts */ + iowrite8(RXFLAGS, port->membase + TIMBUART_ISR); + } + + /* always have the RX interrupts enabled */ + *ier |= RXBAF | RXBF | RXTT; + + dev_dbg(port->dev, "%s - leaving\n", __func__); +} + +void timbuart_tasklet(unsigned long arg) +{ + struct timbuart_port *uart = (struct timbuart_port *)arg; + u8 isr, ier = 0; + + spin_lock(&uart->port.lock); + + isr = ioread8(uart->port.membase + TIMBUART_ISR); + dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr); + + if (!uart->usedma) + timbuart_handle_tx_port(&uart->port, isr, &ier); + + timbuart_mctrl_check(&uart->port, isr, &ier); + + if (!uart->usedma) + timbuart_handle_rx_port(&uart->port, isr, &ier); + + iowrite8(ier, uart->port.membase + TIMBUART_IER); + + spin_unlock(&uart->port.lock); + dev_dbg(uart->port.dev, "%s leaving\n", __func__); +} + +static unsigned int timbuart_tx_empty(struct uart_port *port) +{ + u8 isr = ioread8(port->membase + TIMBUART_ISR); + + return (isr & TXBAE) ? TIOCSER_TEMT : 0; +} + +static unsigned int timbuart_get_mctrl(struct uart_port *port) +{ + u8 cts = ioread8(port->membase + TIMBUART_CTRL); + dev_dbg(port->dev, "%s - cts %x\n", __func__, cts); + + if (cts & TIMBUART_CTRL_CTS) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + else + return TIOCM_DSR | TIOCM_CAR; +} + +static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + dev_dbg(port->dev, "%s - %x\n", __func__, mctrl); + + if (mctrl & TIOCM_RTS) + iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL); + else + iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL); +} + +static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier) +{ + unsigned int cts; + + if (isr & CTS_DELTA) { + /* ack */ + iowrite8(CTS_DELTA, port->membase + TIMBUART_ISR); + cts = timbuart_get_mctrl(port); + uart_handle_cts_change(port, cts & TIOCM_CTS); + wake_up_interruptible(&port->info->delta_msr_wait); + } + + *ier |= CTS_DELTA; +} + +static void timbuart_enable_ms(struct uart_port *port) +{ + /* N/A */ +} + +static void timbuart_break_ctl(struct uart_port *port, int ctl) +{ + /* N/A */ +} + +static int timbuart_startup(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + + dev_dbg(port->dev, "%s\n", __func__); + + iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL); + iowrite8(0xff, port->membase + TIMBUART_ISR); + /* Enable all but TX interrupts */ + iowrite8(RXBAF | RXBF | RXTT | CTS_DELTA, + port->membase + TIMBUART_IER); + + return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED, + "timb-uart", uart); +} + +static void timbuart_shutdown(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + dev_dbg(port->dev, "%s\n", __func__); + free_irq(port->irq, uart); + iowrite8(0, port->membase + TIMBUART_IER); +} + +static int get_bindex(int baud) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(baudrates); i++) + if (baud == baudrates[i]) + return i; + + return -1; +} + +static void timbuart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud; + short bindex; + unsigned long flags; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + bindex = get_bindex(baud); + dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex); + + if (bindex < 0) { + printk(KERN_ALERT "timbuart: Unsupported baud rate\n"); + } else { + spin_lock_irqsave(&port->lock, flags); + iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock_irqrestore(&port->lock, flags); + } +} + +static const char *timbuart_type(struct uart_port *port) +{ + return port->type == PORT_UNKNOWN ? "timbuart" : NULL; +} + +/* We do not request/release mappings of the registers here, + * currently it's done in the proble function. + */ +static void timbuart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = + resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, size); +} + +static int timbuart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = + resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); + + if (!request_mem_region(port->mapbase, size, "timb-uart")) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_mem_region(port->mapbase, size); + return -ENOMEM; + } + } + + return 0; +} + +static irqreturn_t timbuart_handleinterrupt(int irq, void *devid) +{ + struct timbuart_port *uart = (struct timbuart_port *)devid; + + if (ioread8(uart->port.membase + TIMBUART_IPR)) { + uart->last_ier = ioread8(uart->port.membase + TIMBUART_IER); + + /* disable interrupts, the tasklet enables them again */ + iowrite8(0, uart->port.membase + TIMBUART_IER); + + /* fire off bottom half */ + tasklet_schedule(&uart->tasklet); + + return IRQ_HANDLED; + } else + return IRQ_NONE; +} + +/* + * Configure/autoconfigure the port. + */ +static void timbuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_TIMBUART; + timbuart_request_port(port); + } +} + +static int timbuart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +static struct uart_ops timbuart_ops = { + .tx_empty = timbuart_tx_empty, + .set_mctrl = timbuart_set_mctrl, + .get_mctrl = timbuart_get_mctrl, + .stop_tx = timbuart_stop_tx, + .start_tx = timbuart_start_tx, + .flush_buffer = timbuart_flush_buffer, + .stop_rx = timbuart_stop_rx, + .enable_ms = timbuart_enable_ms, + .break_ctl = timbuart_break_ctl, + .startup = timbuart_startup, + .shutdown = timbuart_shutdown, + .set_termios = timbuart_set_termios, + .type = timbuart_type, + .release_port = timbuart_release_port, + .request_port = timbuart_request_port, + .config_port = timbuart_config_port, + .verify_port = timbuart_verify_port +}; + +static struct uart_driver timbuart_driver = { + .owner = THIS_MODULE, + .driver_name = "timberdale_uart", + .dev_name = "ttyTU", + .major = TIMBUART_MAJOR, + .minor = TIMBUART_MINOR, + .nr = 1 +}; + +static int timbuart_probe(struct platform_device *dev) +{ + int err; + struct timbuart_port *uart; + struct resource *iomem; + + dev_dbg(&dev->dev, "%s\n", __func__); + + uart = kzalloc(sizeof(*uart), GFP_KERNEL); + if (!uart) { + err = -EINVAL; + goto err_mem; + } + + uart->usedma = 0; + + uart->port.uartclk = 3250000 * 16; + uart->port.fifosize = TIMBUART_FIFO_SIZE; + uart->port.regshift = 2; + uart->port.iotype = UPIO_MEM; + uart->port.ops = &timbuart_ops; + uart->port.irq = 0; + uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + uart->port.line = 0; + uart->port.dev = &dev->dev; + + iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!iomem) { + err = -ENOMEM; + goto err_register; + } + uart->port.mapbase = iomem->start; + uart->port.membase = NULL; + + uart->port.irq = platform_get_irq(dev, 0); + if (uart->port.irq < 0) { + err = -EINVAL; + goto err_register; + } + + tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart); + + err = uart_register_driver(&timbuart_driver); + if (err) + goto err_register; + + err = uart_add_one_port(&timbuart_driver, &uart->port); + if (err) + goto err_add_port; + + platform_set_drvdata(dev, uart); + + return 0; + +err_add_port: + uart_unregister_driver(&timbuart_driver); +err_register: + kfree(uart); +err_mem: + printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n", + err); + + return err; +} + +static int timbuart_remove(struct platform_device *dev) +{ + struct timbuart_port *uart = platform_get_drvdata(dev); + + tasklet_kill(&uart->tasklet); + uart_remove_one_port(&timbuart_driver, &uart->port); + uart_unregister_driver(&timbuart_driver); + kfree(uart); + + return 0; +} + +static struct platform_driver timbuart_platform_driver = { + .driver = { + .name = "timb-uart", + .owner = THIS_MODULE, + }, + .probe = timbuart_probe, + .remove = timbuart_remove, +}; + +/*--------------------------------------------------------------------------*/ + +static int __init timbuart_init(void) +{ + return platform_driver_register(&timbuart_platform_driver); +} + +static void __exit timbuart_exit(void) +{ + platform_driver_unregister(&timbuart_platform_driver); +} + +module_init(timbuart_init); +module_exit(timbuart_exit); + +MODULE_DESCRIPTION("Timberdale UART driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:timb-uart"); + diff --git a/drivers/serial/timbuart.h b/drivers/serial/timbuart.h new file mode 100644 index 000000000000..7e566766bc43 --- /dev/null +++ b/drivers/serial/timbuart.h @@ -0,0 +1,58 @@ +/* + * timbuart.c timberdale FPGA GPIO driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Timberdale FPGA UART + */ + +#ifndef _TIMBUART_H +#define _TIMBUART_H + +#define TIMBUART_FIFO_SIZE 2048 + +#define TIMBUART_RXFIFO 0x08 +#define TIMBUART_TXFIFO 0x0c +#define TIMBUART_IER 0x10 +#define TIMBUART_IPR 0x14 +#define TIMBUART_ISR 0x18 +#define TIMBUART_CTRL 0x1c +#define TIMBUART_BAUDRATE 0x20 + +#define TIMBUART_CTRL_RTS 0x01 +#define TIMBUART_CTRL_CTS 0x02 +#define TIMBUART_CTRL_FLSHTX 0x40 +#define TIMBUART_CTRL_FLSHRX 0x80 + +#define TXBF 0x01 +#define TXBAE 0x02 +#define CTS_DELTA 0x04 +#define RXDP 0x08 +#define RXBAF 0x10 +#define RXBF 0x20 +#define RXTT 0x40 +#define RXBNAE 0x80 +#define TXBE 0x100 + +#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE) +#define TXFLAGS (TXBF | TXBAE) + +#define TIMBUART_MAJOR 204 +#define TIMBUART_MINOR 192 + +#endif /* _TIMBUART_H */ + diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 48766ea845cf..6fd80c4243f1 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -168,6 +168,9 @@ /* MAX3100 */ #define PORT_MAX3100 86 +/* Timberdale UART */ +#define PORT_TIMBUART 87 + #ifdef __KERNEL__ #include -- cgit v1.2.2 From 7d55deaf50182c47c1e805dc8cc85f2769f0673e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 14:27:13 +0100 Subject: timbuart: Fix the termios logic The driver only handles speeds but it fails to return the current values for the hardware features it does not support. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/timbuart.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c index 30ba3c4cc180..ac9e5d5f742e 100644 --- a/drivers/serial/timbuart.c +++ b/drivers/serial/timbuart.c @@ -278,7 +278,7 @@ static int get_bindex(int baud) int i; for (i = 0; i < ARRAY_SIZE(baudrates); i++) - if (baud == baudrates[i]) + if (baud <= baudrates[i]) return i; return -1; @@ -296,14 +296,20 @@ static void timbuart_set_termios(struct uart_port *port, bindex = get_bindex(baud); dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex); - if (bindex < 0) { - printk(KERN_ALERT "timbuart: Unsupported baud rate\n"); - } else { - spin_lock_irqsave(&port->lock, flags); - iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); - uart_update_timeout(port, termios->c_cflag, baud); - spin_unlock_irqrestore(&port->lock, flags); - } + if (bindex < 0) + bindex = 0; + baud = baudrates[bindex]; + + /* The serial layer calls into this once with old = NULL when setting + up initially */ + if (old) + tty_termios_copy_hw(termios, old); + tty_termios_encode_baud_rate(termios, baud, baud); + + spin_lock_irqsave(&port->lock, flags); + iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock_irqrestore(&port->lock, flags); } static const char *timbuart_type(struct uart_port *port) -- cgit v1.2.2 From 00b040deca907a113f5bef67a6cc7a4f65a5ace9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Jun 2009 14:29:29 +0100 Subject: tty: resolve some sierra breakage The various merges into the sierra driver inadvertently undid commit 212b8f0c3f5a2280bfa1d6ab13a6fe98552becaa by Elina Pasheva . Put it back so the OBEX port works again. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/sierra.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 1319b8968d82..222a6230276b 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -257,8 +257,19 @@ static int sierra_send_setup(struct usb_serial_port *port) val |= 0x02; /* If composite device then properly report interface */ - if (serial->num_ports == 1) + if (serial->num_ports == 1) { interface = sierra_calc_interface(serial); + /* Control message is sent only to interfaces with + * interrupt_in endpoints + */ + if (port->interrupt_in_urb) { + /* send control message */ + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, + NULL, 0, USB_CTRL_SET_TIMEOUT); + } + } /* Otherwise the need to do non-composite mapping */ else { @@ -268,11 +279,11 @@ static int sierra_send_setup(struct usb_serial_port *port) interface = 1; else if (port->bulk_out_endpointAddress == 5) interface = 2; - } - return usb_control_msg(serial->dev, + return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); + } return 0; } -- cgit v1.2.2 From b9a44bc19f48fd82b8f411500a9bb0ea4153d23c Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Thu, 11 Jun 2009 14:30:21 +0100 Subject: sierra: driver urb handling improvements [Folded from eight patches into one as the original set according to the author "All of the patches need to be applied to obtain a working product" so keeping them split seems unhelpful Merge fixes done versus other conflicting changes and moved the spin_lock_init from open to setup time -- Alan] Summary of the changes and code re-organization in this patch: - The memory for urbs is allocated and urbs are submitted only for the active interfaces (instead of pre-allocating these for all interfaces). This will save memory especially in the case of using composite devices. - The code has been re-organized and functionality has been extracted from sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added in helper functions sierra_release_urb(), sierra_stop_rx_urbs(), sierra_submit_rx_urbs() and sierra_setup_urb() - Added function sierra_release_urb() to free an urb and its transfer buffer. - Removed unecessary include file reference and comment. - Added function sierra_stop_rx_urbs() that takes care of the release of receive and interrupt urbs. This function is to be called by sierra_close() whenever an interface is de-activated. - Added new function sierra_submit_rx_urbs() that handles the submission of receive urbs and interrupt urbs (if any) during the interface activation. This function is to be called by sierra_open(). Added a second parameter to pass the memory allocation (as suggested by Oliver Neukum) so that this function can be used in post_reset() and resume(). - Added new function sierra_setup_urb() that contains the functionality to allocate an urb, fill bulk urb using the supplied memory allocation flag and release urb upon error. Added parameter so that the caller pass the memory allocation flag for flexibility. - Moved sierra_close() before sierra_open() to resolve dependencies introduced by the code reorganization. - Modified sierra_close() to call sierra_stop_rx_urbs() and sierra_release_urb() functions added in previous patch. - Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs() functions; note urbs are allocated and submitted for each activated interface. - Modified sierra_startup() so that allocation of urbs happens whenever an interface is activated (urb allocation is moved to sierra_open()). - Modified sierra_shutdown() so that urbs are freed whenever an interface is de-activated (urb freeing moved to sierra_close() as shown in previous patch from the series) - Removed unecessary data structure from sierra_port_private_data - Suppress an entry in logs by not re-submitting an urb when usb_submit_urb() returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by Oliver Neukum) Signed-off-by: Elina Pasheva Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/sierra.c | 228 ++++++++++++++++++++++++++++---------------- 1 file changed, 144 insertions(+), 84 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 222a6230276b..88ec7bfd9d35 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -26,12 +26,10 @@ #include #include #include -#include #define SWIMS_USB_REQUEST_SetPower 0x00 #define SWIMS_USB_REQUEST_SetNmea 0x07 -/* per port private data */ #define N_IN_URB 4 #define N_OUT_URB 4 #define IN_BUFLEN 4096 @@ -229,7 +227,6 @@ struct sierra_port_private { /* Input endpoints and buffers for this port */ struct urb *in_urbs[N_IN_URB]; - char *in_buffer[N_IN_URB]; /* Settings for the port */ int rts_state; /* Handshaking pins (outputs) */ @@ -334,6 +331,17 @@ static int sierra_tiocmset(struct tty_struct *tty, struct file *file, return sierra_send_setup(port); } +static void sierra_release_urb(struct urb *urb) +{ + struct usb_serial_port *port; + if (urb) { + port = urb->context; + dev_dbg(&port->dev, "%s: %p\n", __func__, urb); + kfree(urb->transfer_buffer); + usb_free_urb(urb); + } +} + static void sierra_outdat_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; @@ -458,7 +466,7 @@ static void sierra_indat_callback(struct urb *urb) " received", __func__); /* Resubmit urb so we continue receiving */ - if (port->port.count && status != -ESHUTDOWN) { + if (port->port.count && status != -ESHUTDOWN && status != -EPERM) { err = usb_submit_urb(urb, GFP_ATOMIC); if (err) dev_err(&port->dev, "resubmit read urb failed." @@ -550,100 +558,184 @@ static int sierra_write_room(struct tty_struct *tty) return 2048; } -static int sierra_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp) +static void sierra_stop_rx_urbs(struct usb_serial_port *port) { - struct sierra_port_private *portdata; - struct usb_serial *serial = port->serial; int i; - struct urb *urb; - int result; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); - portdata = usb_get_serial_port_data(port); + for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) + usb_kill_urb(portdata->in_urbs[i]); - dev_dbg(&port->dev, "%s", __func__); + usb_kill_urb(port->interrupt_in_urb); +} - /* Set some sane defaults */ - portdata->rts_state = 1; - portdata->dtr_state = 1; +static int sierra_submit_rx_urbs(struct usb_serial_port *port, gfp_t mem_flags) +{ + int ok_cnt; + int err = -EINVAL; + int i; + struct urb *urb; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); - /* Reset low level data toggle and start reading from endpoints */ - for (i = 0; i < N_IN_URB; i++) { + ok_cnt = 0; + for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { urb = portdata->in_urbs[i]; if (!urb) continue; - if (urb->dev != serial->dev) { - dev_dbg(&port->dev, "%s: dev %p != %p", - __func__, urb->dev, serial->dev); - continue; + err = usb_submit_urb(urb, mem_flags); + if (err) { + dev_err(&port->dev, "%s: submit urb failed: %d\n", + __func__, err); + } else { + ok_cnt++; } + } - /* - * make sure endpoint data toggle is synchronized with the - * device - */ - usb_clear_halt(urb->dev, urb->pipe); - - result = usb_submit_urb(urb, GFP_KERNEL); - if (result) { - dev_err(&port->dev, "submit urb %d failed (%d) %d\n", - i, result, urb->transfer_buffer_length); + if (ok_cnt && port->interrupt_in_urb) { + err = usb_submit_urb(port->interrupt_in_urb, mem_flags); + if (err) { + dev_err(&port->dev, "%s: submit intr urb failed: %d\n", + __func__, err); } } - sierra_send_setup(port); + if (ok_cnt > 0) /* at least one rx urb submitted */ + return 0; + else + return err; +} + +static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint, + int dir, void *ctx, int len, + gfp_t mem_flags, + usb_complete_t callback) +{ + struct urb *urb; + u8 *buf; + + if (endpoint == -1) + return NULL; - /* start up the interrupt endpoint if we have one */ - if (port->interrupt_in_urb) { - result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, "submit irq_in urb failed %d\n", - result); + urb = usb_alloc_urb(0, mem_flags); + if (urb == NULL) { + dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n", + __func__, endpoint); + return NULL; } - return 0; + + buf = kmalloc(len, mem_flags); + if (buf) { + /* Fill URB using supplied data */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + + /* debug */ + dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__, + dir == USB_DIR_IN ? 'i' : 'o', urb, buf); + } else { + dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__, + dir == USB_DIR_IN ? 'i' : 'o', urb, buf); + + sierra_release_urb(urb); + urb = NULL; + } + + return urb; } -static void sierra_dtr_rts(struct usb_serial_port *port, int on) +static void sierra_close(struct usb_serial_port *port) { + int i; struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; + dev_dbg(&port->dev, "%s\n", __func__); portdata = usb_get_serial_port_data(port); - portdata->rts_state = on; - portdata->dtr_state = on; + + portdata->rts_state = 0; + portdata->dtr_state = 0; if (serial->dev) { mutex_lock(&serial->disc_mutex); if (!serial->disconnected) sierra_send_setup(port); mutex_unlock(&serial->disc_mutex); + + /* Stop reading urbs */ + sierra_stop_rx_urbs(port); + /* .. and release them */ + for (i = 0; i < N_IN_URB; i++) { + sierra_release_urb(portdata->in_urbs[i]); + portdata->in_urbs[i] = NULL; + } } } -static void sierra_close(struct usb_serial_port *port) +static int sierra_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { + struct sierra_port_private *portdata; + struct usb_serial *serial = port->serial; int i; + int err; + int endpoint; + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + + dev_dbg(&port->dev, "%s", __func__); + + /* Set some sane defaults */ + portdata->rts_state = 1; + portdata->dtr_state = 1; + + + endpoint = port->bulk_in_endpointAddress; + for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { + urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port, + IN_BUFLEN, GFP_KERNEL, + sierra_indat_callback); + portdata->in_urbs[i] = urb; + } + /* clear halt condition */ + usb_clear_halt(serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN); + + err = sierra_submit_rx_urbs(port, GFP_KERNEL); + if (err) { + /* get rid of everything as in close */ + sierra_close(port); + return err; + } + sierra_send_setup(port); + + return 0; +} + + +static void sierra_dtr_rts(struct usb_serial_port *port, int on) +{ struct usb_serial *serial = port->serial; struct sierra_port_private *portdata; - dev_dbg(&port->dev, "%s", __func__); portdata = usb_get_serial_port_data(port); + portdata->rts_state = on; + portdata->dtr_state = on; if (serial->dev) { - /* Stop reading/writing urbs */ - for (i = 0; i < N_IN_URB; i++) - usb_kill_urb(portdata->in_urbs[i]); + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + sierra_send_setup(port); + mutex_unlock(&serial->disc_mutex); } - usb_kill_urb(port->interrupt_in_urb); } static int sierra_startup(struct usb_serial *serial) { struct usb_serial_port *port; struct sierra_port_private *portdata; - struct urb *urb; int i; - int j; dev_dbg(&serial->dev->dev, "%s", __func__); @@ -665,34 +757,8 @@ static int sierra_startup(struct usb_serial *serial) return -ENOMEM; } spin_lock_init(&portdata->lock); - for (j = 0; j < N_IN_URB; j++) { - portdata->in_buffer[j] = kmalloc(IN_BUFLEN, GFP_KERNEL); - if (!portdata->in_buffer[j]) { - for (--j; j >= 0; j--) - kfree(portdata->in_buffer[j]); - kfree(portdata); - return -ENOMEM; - } - } - + /* Set the port private data pointer */ usb_set_serial_port_data(port, portdata); - - /* initialize the in urbs */ - for (j = 0; j < N_IN_URB; ++j) { - urb = usb_alloc_urb(0, GFP_KERNEL); - if (urb == NULL) { - dev_dbg(&port->dev, "%s: alloc for in " - "port failed.", __func__); - continue; - } - /* Fill URB using supplied data. */ - usb_fill_bulk_urb(urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - port->bulk_in_endpointAddress), - portdata->in_buffer[j], IN_BUFLEN, - sierra_indat_callback, port); - portdata->in_urbs[j] = urb; - } } return 0; @@ -700,7 +766,7 @@ static int sierra_startup(struct usb_serial *serial) static void sierra_shutdown(struct usb_serial *serial) { - int i, j; + int i; struct usb_serial_port *port; struct sierra_port_private *portdata; @@ -713,12 +779,6 @@ static void sierra_shutdown(struct usb_serial *serial) portdata = usb_get_serial_port_data(port); if (!portdata) continue; - - for (j = 0; j < N_IN_URB; j++) { - usb_kill_urb(portdata->in_urbs[j]); - usb_free_urb(portdata->in_urbs[j]); - kfree(portdata->in_buffer[j]); - } kfree(portdata); usb_set_serial_port_data(port, NULL); } -- cgit v1.2.2 From 4db2299da213d1ba8cf7f4c0a197ae7ba49db5cb Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Thu, 11 Jun 2009 14:32:01 +0100 Subject: sierra: driver interface blacklisting Interface blacklisting is necessary for non-serial interfaces that are handled by a different driver. The interface blacklisting is implemented in sierra driver per device. Each device in need of a blacklist has a static information array kept in the driver. This array contains the interface numbers that are blacklisted. The pointer for each blacklist array and the length of that blacklist are 'bundled' in data structure sierra_iface_info. A pointer to this information is set in id_table when the device is added to the id_table. The following is summary of changes we have made to sierra.c driver in this patch dealing with interface blacklisting support: - Added data structure sierra_iface_info and function is_blacklisted() to support blacklisting - Modified sierra_probe() to handle blacklisted interfaces accordingly - Improved comments in id_table - Added new device in id_table with blacklist interface support Signed-off-by: Elina Pasheva Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/sierra.c | 51 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 48 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 88ec7bfd9d35..17ac34f4d668 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -37,6 +37,12 @@ static int debug; static int nmea; +/* Used in interface blacklisting */ +struct sierra_iface_info { + const u32 infolen; /* number of interface numbers on blacklist */ + const u8 *ifaceinfo; /* pointer to the array holding the numbers */ +}; + static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) { int result; @@ -83,6 +89,23 @@ static int sierra_calc_num_ports(struct usb_serial *serial) return result; } +static int is_blacklisted(const u8 ifnum, + const struct sierra_iface_info *blacklist) +{ + const u8 *info; + int i; + + if (blacklist) { + info = blacklist->ifaceinfo; + + for (i = 0; i < blacklist->infolen; i++) { + if (info[i] == ifnum) + return 1; + } + } + return 0; +} + static int sierra_calc_interface(struct usb_serial *serial) { int interface; @@ -151,9 +174,25 @@ static int sierra_probe(struct usb_serial *serial, */ usb_set_serial_data(serial, (void *)num_ports); + /* ifnum could have changed - by calling usb_set_interface */ + ifnum = sierra_calc_interface(serial); + + if (is_blacklisted(ifnum, + (struct sierra_iface_info *)id->driver_info)) { + dev_dbg(&serial->dev->dev, + "Ignoring blacklisted interface #%d\n", ifnum); + return -ENODEV; + } + return result; } +static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 }; +static const struct sierra_iface_info direct_ip_interface_blacklist = { + .infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces), + .ifaceinfo = direct_ip_non_serial_ifaces, +}; + static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ @@ -186,9 +225,11 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */ { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ - { USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */ - { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */ - { USB_DEVICE(0x1199, 0x683E) }, /* Sierra Wireless MC8790 */ + /* Sierra Wireless MC8790, MC8791, MC8792 Composite */ + { USB_DEVICE(0x1199, 0x683C) }, + { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8791 Composite */ + /* Sierra Wireless MC8790, MC8791, MC8792 */ + { USB_DEVICE(0x1199, 0x683E) }, { USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */ { USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */ { USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */ @@ -209,6 +250,10 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */ + { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, + { } }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit v1.2.2 From 5fc5b42a3bb564f0b6e03f0f1b522ed9100250ad Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 14:32:42 +0100 Subject: tty: remove sleep_on Use wait_event instead of sleep_on in tty_block_til_ready. Wait for ASYNC_CLOSING flag being 0. Signed-off-by: Jiri Slaby Signed-off-by: Linus Torvalds --- drivers/char/tty_port.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 4d08b6d27c28..931af1030740 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -198,7 +198,8 @@ int tty_port_block_til_ready(struct tty_port *port, /* block if port is in the process of being closed */ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->close_wait); + wait_event_interruptible(port->close_wait, + !(port->flags & ASYNC_CLOSING)); if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; else -- cgit v1.2.2 From 3e3b5c087799e536871c8261b05bc28e4783c8da Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 11 Jun 2009 14:33:37 +0100 Subject: tty: use prepare/finish_wait Use prepare_to_wait and finish_wait instead of add_wait_queue and remove_wait_queue. This avoids us setting a task state. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_port.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 931af1030740..62dadfc95e34 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -222,7 +222,6 @@ int tty_port_block_til_ready(struct tty_port *port, before the next open may complete */ retval = 0; - add_wait_queue(&port->open_wait, &wait); /* The port lock protects the port counts */ spin_lock_irqsave(&port->lock, flags); @@ -236,7 +235,7 @@ int tty_port_block_til_ready(struct tty_port *port, if (tty->termios->c_cflag & CBAUD) tty_port_raise_dtr_rts(port); - set_current_state(TASK_INTERRUPTIBLE); + prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); /* Check for a hangup or uninitialised port. Return accordingly */ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { if (port->flags & ASYNC_HUP_NOTIFY) @@ -257,8 +256,7 @@ int tty_port_block_til_ready(struct tty_port *port, } schedule(); } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); + finish_wait(&port->open_wait, &wait); /* Update counts. A parallel hangup will have set count to zero and we must not mess that up further */ -- cgit v1.2.2 From d3810cd4d7064b109574374f73c41b11b481dbf2 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 11 Jun 2009 14:35:01 +0100 Subject: imx: serial: fix whitespaces (no changes in functionality) Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 48 +++++++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 25 deletions(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 5f0be40dfdab..76c8fa1884ec 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -302,8 +302,7 @@ static inline void imx_transmit_buffer(struct imx_port *sport) /* send xmit->buf[xmit->tail] * out the port here */ writel(xmit->buf[xmit->tail], sport->port.membase + URTX0); - xmit->tail = (xmit->tail + 1) & - (UART_XMIT_SIZE - 1); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); sport->port.icount.tx++; if (uart_circ_empty(xmit)) break; @@ -395,8 +394,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id) continue; } - if (uart_handle_sysrq_char - (&sport->port, (unsigned char)rx)) + if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) continue; if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) { @@ -471,26 +469,26 @@ static unsigned int imx_tx_empty(struct uart_port *port) */ static unsigned int imx_get_mctrl(struct uart_port *port) { - struct imx_port *sport = (struct imx_port *)port; - unsigned int tmp = TIOCM_DSR | TIOCM_CAR; + struct imx_port *sport = (struct imx_port *)port; + unsigned int tmp = TIOCM_DSR | TIOCM_CAR; - if (readl(sport->port.membase + USR1) & USR1_RTSS) - tmp |= TIOCM_CTS; + if (readl(sport->port.membase + USR1) & USR1_RTSS) + tmp |= TIOCM_CTS; - if (readl(sport->port.membase + UCR2) & UCR2_CTS) - tmp |= TIOCM_RTS; + if (readl(sport->port.membase + UCR2) & UCR2_CTS) + tmp |= TIOCM_RTS; - return tmp; + return tmp; } static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) { - struct imx_port *sport = (struct imx_port *)port; + struct imx_port *sport = (struct imx_port *)port; unsigned long temp; temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS; - if (mctrl & TIOCM_RTS) + if (mctrl & TIOCM_RTS) temp |= UCR2_CTS; writel(temp, sport->port.membase + UCR2); @@ -1072,22 +1070,22 @@ static struct uart_driver imx_reg = { static int serial_imx_suspend(struct platform_device *dev, pm_message_t state) { - struct imx_port *sport = platform_get_drvdata(dev); + struct imx_port *sport = platform_get_drvdata(dev); - if (sport) - uart_suspend_port(&imx_reg, &sport->port); + if (sport) + uart_suspend_port(&imx_reg, &sport->port); - return 0; + return 0; } static int serial_imx_resume(struct platform_device *dev) { - struct imx_port *sport = platform_get_drvdata(dev); + struct imx_port *sport = platform_get_drvdata(dev); - if (sport) - uart_resume_port(&imx_reg, &sport->port); + if (sport) + uart_resume_port(&imx_reg, &sport->port); - return 0; + return 0; } static int serial_imx_probe(struct platform_device *pdev) @@ -1143,7 +1141,7 @@ static int serial_imx_probe(struct platform_device *pdev) imx_ports[pdev->id] = sport; pdata = pdev->dev.platform_data; - if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) + if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) sport->have_rtscts = 1; if (pdata->init) { @@ -1193,13 +1191,13 @@ static int serial_imx_remove(struct platform_device *pdev) } static struct platform_driver serial_imx_driver = { - .probe = serial_imx_probe, - .remove = serial_imx_remove, + .probe = serial_imx_probe, + .remove = serial_imx_remove, .suspend = serial_imx_suspend, .resume = serial_imx_resume, .driver = { - .name = "imx-uart", + .name = "imx-uart", .owner = THIS_MODULE, }, }; -- cgit v1.2.2 From 26bbb3ff1ff6163d6a233055766e26af8054a212 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= Date: Thu, 11 Jun 2009 14:36:29 +0100 Subject: imx: serial: fix one bit field type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit "have_rtscts" is assigned 1, while it is declared int:1, two's complement, which can hold 0 and -1 only. The code works, as the upper bits are cut off, and tests are done against 0 only. Nonetheless, correctly declaring the bit field as unsigned int:1 renders the code more robust. Signed-off-by: Daniel Glöckner Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 76c8fa1884ec..6b8f12f4a705 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -211,7 +211,7 @@ struct imx_port { struct timer_list timer; unsigned int old_status; int txirq,rxirq,rtsirq; - int have_rtscts:1; + unsigned int have_rtscts:1; struct clk *clk; }; -- cgit v1.2.2 From 977757311e50dc5d832c9fef34e7555411f7ccd8 Mon Sep 17 00:00:00 2001 From: Fabian Godehardt Date: Thu, 11 Jun 2009 14:37:19 +0100 Subject: imx: serial: notify higher layers in case xmit IRQ was not called upper layers, namely line discipline, need to be notified when transmission of more data is possible. For spurious cases, where IRQ handling does not supply notification for sure, it is given additionally here, when data has just been transmitted and space in the buffer will most probably be available. Signed-off-by: Fabian Godehardt Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 6b8f12f4a705..49f2e12ba58d 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -308,6 +308,9 @@ static inline void imx_transmit_buffer(struct imx_port *sport) break; } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + if (uart_circ_empty(xmit)) imx_stop_tx(&sport->port); } -- cgit v1.2.2 From 2e1463922a35584c863f71d4021e1e71f76eaed0 Mon Sep 17 00:00:00 2001 From: Fabian Godehardt Date: Thu, 11 Jun 2009 14:38:38 +0100 Subject: imx: serial: be sure to stop xmit upon shutdown needed to avoid continued transmission by hardware while software already shuts down, which might cause dangling characters to show up in hardware queues when restarting the device. Signed-off-by: Fabian Godehardt Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 49f2e12ba58d..e6c2ba26dcbb 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -634,6 +634,10 @@ static void imx_shutdown(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + temp = readl(sport->port.membase + UCR2); + temp &= ~(UCR2_TXEN); + writel(temp, sport->port.membase + UCR2); + /* * Stop our timer. */ -- cgit v1.2.2 From 9f322ad064f9210e7d472dfe77e702274d5c9dba Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= Date: Thu, 11 Jun 2009 14:39:21 +0100 Subject: imx: serial: handle initialisation failure correctly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit correctly de-initialise device when setting up failed, call to pdata->exit() was missing. Signed-off-by: Daniel Glöckner Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index e6c2ba26dcbb..cbd4f3224643 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1157,10 +1157,15 @@ static int serial_imx_probe(struct platform_device *pdev) goto clkput; } - uart_add_one_port(&imx_reg, &sport->port); + ret = uart_add_one_port(&imx_reg, &sport->port); + if (ret) + goto deinit; platform_set_drvdata(pdev, &sport->port); return 0; +deinit: + if (pdata->exit) + pdata->exit(pdev); clkput: clk_put(sport->clk); clk_disable(sport->clk); -- cgit v1.2.2 From 8759ef32d992fc6c0bcbe40fca7aa302190918a5 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 11 Jun 2009 14:51:15 +0100 Subject: lib: isolate rational fractions helper function Provide a helper function to determine optimum numerator denominator value pairs taking into account restricted register size. Useful especially with PLL and other clock configurations. Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/rational.h | 19 +++++++++++++++ lib/Kconfig | 3 +++ lib/Makefile | 1 + lib/rational.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 85 insertions(+) create mode 100644 include/linux/rational.h create mode 100644 lib/rational.c diff --git a/include/linux/rational.h b/include/linux/rational.h new file mode 100644 index 000000000000..4f532fcd9eea --- /dev/null +++ b/include/linux/rational.h @@ -0,0 +1,19 @@ +/* + * rational fractions + * + * Copyright (C) 2009 emlix GmbH, Oskar Schirmer + * + * helper functions when coping with rational numbers, + * e.g. when calculating optimum numerator/denominator pairs for + * pll configuration taking into account restricted register size + */ + +#ifndef _LINUX_RATIONAL_H +#define _LINUX_RATIONAL_H + +void rational_best_approximation( + unsigned long given_numerator, unsigned long given_denominator, + unsigned long max_numerator, unsigned long max_denominator, + unsigned long *best_numerator, unsigned long *best_denominator); + +#endif /* _LINUX_RATIONAL_H */ diff --git a/lib/Kconfig b/lib/Kconfig index 8ade0a7a91e0..9960be04cbbe 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -10,6 +10,9 @@ menu "Library routines" config BITREVERSE tristate +config RATIONAL + boolean + config GENERIC_FIND_FIRST_BIT bool diff --git a/lib/Makefile b/lib/Makefile index 33a40e40e3ee..1f6edefebffe 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -50,6 +50,7 @@ ifneq ($(CONFIG_HAVE_DEC_LOCK),y) endif obj-$(CONFIG_BITREVERSE) += bitrev.o +obj-$(CONFIG_RATIONAL) += rational.o obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o obj-$(CONFIG_CRC16) += crc16.o obj-$(CONFIG_CRC_T10DIF)+= crc-t10dif.o diff --git a/lib/rational.c b/lib/rational.c new file mode 100644 index 000000000000..b3c099b5478e --- /dev/null +++ b/lib/rational.c @@ -0,0 +1,62 @@ +/* + * rational fractions + * + * Copyright (C) 2009 emlix GmbH, Oskar Schirmer + * + * helper functions when coping with rational numbers + */ + +#include + +/* + * calculate best rational approximation for a given fraction + * taking into account restricted register size, e.g. to find + * appropriate values for a pll with 5 bit denominator and + * 8 bit numerator register fields, trying to set up with a + * frequency ratio of 3.1415, one would say: + * + * rational_best_approximation(31415, 10000, + * (1 << 8) - 1, (1 << 5) - 1, &n, &d); + * + * you may look at given_numerator as a fixed point number, + * with the fractional part size described in given_denominator. + * + * for theoretical background, see: + * http://en.wikipedia.org/wiki/Continued_fraction + */ + +void rational_best_approximation( + unsigned long given_numerator, unsigned long given_denominator, + unsigned long max_numerator, unsigned long max_denominator, + unsigned long *best_numerator, unsigned long *best_denominator) +{ + unsigned long n, d, n0, d0, n1, d1; + n = given_numerator; + d = given_denominator; + n0 = d1 = 0; + n1 = d0 = 1; + for (;;) { + unsigned long t, a; + if ((n1 > max_numerator) || (d1 > max_denominator)) { + n1 = n0; + d1 = d0; + break; + } + if (d == 0) + break; + t = d; + a = n / d; + d = n % d; + n = t; + t = n0 + a * n1; + n0 = n1; + n1 = t; + t = d0 + a * d1; + d0 = d1; + d1 = t; + } + *best_numerator = n1; + *best_denominator = d1; +} + +EXPORT_SYMBOL(rational_best_approximation); -- cgit v1.2.2 From 534fca068ec8063ec8b67626b3eb34ba6ec86967 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 11 Jun 2009 14:52:23 +0100 Subject: imx: serial: use rational library function for calculation of numerator and denominator used in baud rate setting, use generic library function for optimum settings. Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/Kconfig | 1 + drivers/serial/imx.c | 30 ++++++++++-------------------- 2 files changed, 11 insertions(+), 20 deletions(-) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 3391ef0d761d..641e800ed693 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -833,6 +833,7 @@ config SERIAL_IMX bool "IMX serial port support" depends on ARM && (ARCH_IMX || ARCH_MXC) select SERIAL_CORE + select RATIONAL help If you have a machine based on a Motorola IMX CPU you can enable its onboard serial port by enabling this option. diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index cbd4f3224643..0de81f71f884 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include @@ -670,7 +671,8 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long flags; unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - unsigned int div, num, denom, ufcr; + unsigned int div, ufcr; + unsigned long num, denom; /* * If we don't support modem control lines, don't allow @@ -772,32 +774,20 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, if (!div) div = 1; - num = baud; - denom = port->uartclk / div / 16; + rational_best_approximation(16 * div * baud, sport->port.uartclk, + 1 << 16, 1 << 16, &num, &denom); - /* shift num and denom right until they fit into 16 bits */ - while (num > 0x10000 || denom > 0x10000) { - num >>= 1; - denom >>= 1; - } - if (num > 0) - num -= 1; - if (denom > 0) - denom -= 1; - - writel(num, sport->port.membase + UBIR); - writel(denom, sport->port.membase + UBMR); - - if (div == 7) - div = 6; /* 6 in RFDIV means divide by 7 */ - else - div = 6 - div; + num -= 1; + denom -= 1; ufcr = readl(sport->port.membase + UFCR); ufcr = (ufcr & (~UFCR_RFDIV)) | (div << 7); writel(ufcr, sport->port.membase + UFCR); + writel(num, sport->port.membase + UBIR); + writel(denom, sport->port.membase + UBMR); + #ifdef ONEMS writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS); #endif -- cgit v1.2.2 From b6e4913834cd032082e5c76dfade61050212dc98 Mon Sep 17 00:00:00 2001 From: Fabian Godehardt Date: Thu, 11 Jun 2009 14:53:18 +0100 Subject: imx: serial: add IrDA support to serial driver Using the iMX serial driver with an IrDA device needs extra peripheral settings and specific timing depending on the transmitter circuitry used. Signed-off-by: Fabian Godehardt Signed-off-by: Oskar Schirmer Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- arch/arm/plat-mxc/include/mach/imx-uart.h | 5 + drivers/serial/imx.c | 195 +++++++++++++++++++++++++++--- 2 files changed, 181 insertions(+), 19 deletions(-) diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h index 599217b2e13f..f9bd17dd8dd7 100644 --- a/arch/arm/plat-mxc/include/mach/imx-uart.h +++ b/arch/arm/plat-mxc/include/mach/imx-uart.h @@ -20,11 +20,16 @@ #define ASMARM_ARCH_UART_H #define IMXUART_HAVE_RTSCTS (1<<0) +#define IMXUART_IRDA (1<<1) struct imxuart_platform_data { int (*init)(struct platform_device *pdev); int (*exit)(struct platform_device *pdev); unsigned int flags; + void (*irda_enable)(int enable); + unsigned int irda_inv_rx:1; + unsigned int irda_inv_tx:1; + unsigned short transceiver_delay; }; #endif diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 0de81f71f884..8c79e8c2fd4e 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -8,6 +8,9 @@ * Author: Sascha Hauer * Copyright (C) 2004 Pengutronix * + * Copyright (C) 2009 emlix GmbH + * Author: Fabian Godehardt (added IrDA support for iMX) + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -41,6 +44,7 @@ #include #include #include +#include #include #include @@ -149,6 +153,7 @@ #define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ +#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ #define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ #define USR1_RTSS (1<<14) /* RTS pin status */ @@ -213,9 +218,19 @@ struct imx_port { unsigned int old_status; int txirq,rxirq,rtsirq; unsigned int have_rtscts:1; + unsigned int use_irda:1; + unsigned int irda_inv_rx:1; + unsigned int irda_inv_tx:1; + unsigned short trcv_delay; /* transceiver delay */ struct clk *clk; }; +#ifdef CONFIG_IRDA +#define USE_IRDA(sport) ((sport)->use_irda) +#else +#define USE_IRDA(sport) (0) +#endif + /* * Handle any change of modem status signal since we were last called. */ @@ -269,6 +284,48 @@ static void imx_stop_tx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + if (USE_IRDA(sport)) { + /* half duplex - wait for end of transmission */ + int n = 256; + while ((--n > 0) && + !(readl(sport->port.membase + USR2) & USR2_TXDC)) { + udelay(5); + barrier(); + } + /* + * irda transceiver - wait a bit more to avoid + * cutoff, hardware dependent + */ + udelay(sport->trcv_delay); + + /* + * half duplex - reactivate receive mode, + * flush receive pipe echo crap + */ + if (readl(sport->port.membase + USR2) & USR2_TXDC) { + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN); + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp &= ~(UCR4_TCEN); + writel(temp, sport->port.membase + UCR4); + + while (readl(sport->port.membase + URXD0) & + URXD_CHARRDY) + barrier(); + + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_RRDYEN; + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp |= UCR4_DREN; + writel(temp, sport->port.membase + UCR4); + } + return; + } + temp = readl(sport->port.membase + UCR1); writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1); } @@ -324,9 +381,30 @@ static void imx_start_tx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + if (USE_IRDA(sport)) { + /* half duplex in IrDA mode; have to disable receive mode */ + temp = readl(sport->port.membase + UCR4); + temp &= ~(UCR4_DREN); + writel(temp, sport->port.membase + UCR4); + + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_RRDYEN); + writel(temp, sport->port.membase + UCR1); + } + temp = readl(sport->port.membase + UCR1); writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1); + if (USE_IRDA(sport)) { + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_TRDYEN; + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp |= UCR4_TCEN; + writel(temp, sport->port.membase + UCR4); + } + if (readl(sport->port.membase + UTS) & UTS_TXEMPTY) imx_transmit_buffer(sport); } @@ -536,12 +614,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) if(!ufcr_rfdiv) ufcr_rfdiv = 1; - if(ufcr_rfdiv >= 7) - ufcr_rfdiv = 6; - else - ufcr_rfdiv = 6 - ufcr_rfdiv; - - val |= UFCR_RFDIV & (ufcr_rfdiv << 7); + val |= UFCR_RFDIV_REG(ufcr_rfdiv); writel(val, sport->port.membase + UFCR); @@ -560,8 +633,24 @@ static int imx_startup(struct uart_port *port) * requesting IRQs */ temp = readl(sport->port.membase + UCR4); + + if (USE_IRDA(sport)) + temp |= UCR4_IRSC; + writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); + if (USE_IRDA(sport)) { + /* reset fifo's and state machines */ + int i = 100; + temp = readl(sport->port.membase + UCR2); + temp &= ~UCR2_SRST; + writel(temp, sport->port.membase + UCR2); + while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && + (--i > 0)) { + udelay(1); + } + } + /* * Allocate the IRQ(s) i.MX1 has three interrupts whereas later * chips only have one interrupt. @@ -577,12 +666,16 @@ static int imx_startup(struct uart_port *port) if (retval) goto error_out2; - retval = request_irq(sport->rtsirq, imx_rtsint, - (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - DRIVER_NAME, sport); - if (retval) - goto error_out3; + /* do not use RTS IRQ on IrDA */ + if (!USE_IRDA(sport)) { + retval = request_irq(sport->rtsirq, imx_rtsint, + (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : + IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING, + DRIVER_NAME, sport); + if (retval) + goto error_out3; + } } else { retval = request_irq(sport->port.irq, imx_int, 0, DRIVER_NAME, sport); @@ -599,18 +692,49 @@ static int imx_startup(struct uart_port *port) temp = readl(sport->port.membase + UCR1); temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; + + if (USE_IRDA(sport)) { + temp |= UCR1_IREN; + temp &= ~(UCR1_RTSDEN); + } + writel(temp, sport->port.membase + UCR1); temp = readl(sport->port.membase + UCR2); temp |= (UCR2_RXEN | UCR2_TXEN); writel(temp, sport->port.membase + UCR2); + if (USE_IRDA(sport)) { + /* clear RX-FIFO */ + int i = 64; + while ((--i > 0) && + (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) { + barrier(); + } + } + #if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 temp = readl(sport->port.membase + UCR3); temp |= UCR3_RXDMUXSEL; writel(temp, sport->port.membase + UCR3); #endif + if (USE_IRDA(sport)) { + temp = readl(sport->port.membase + UCR4); + if (sport->irda_inv_rx) + temp |= UCR4_INVR; + else + temp &= ~(UCR4_INVR); + writel(temp | UCR4_DREN, sport->port.membase + UCR4); + + temp = readl(sport->port.membase + UCR3); + if (sport->irda_inv_tx) + temp |= UCR3_INVT; + else + temp &= ~(UCR3_INVT); + writel(temp, sport->port.membase + UCR3); + } + /* * Enable modem status interrupts */ @@ -618,6 +742,16 @@ static int imx_startup(struct uart_port *port) imx_enable_ms(&sport->port); spin_unlock_irqrestore(&sport->port.lock,flags); + if (USE_IRDA(sport)) { + struct imxuart_platform_data *pdata; + pdata = sport->port.dev->platform_data; + sport->irda_inv_rx = pdata->irda_inv_rx; + sport->irda_inv_tx = pdata->irda_inv_tx; + sport->trcv_delay = pdata->transceiver_delay; + if (pdata->irda_enable) + pdata->irda_enable(1); + } + return 0; error_out3: @@ -639,6 +773,13 @@ static void imx_shutdown(struct uart_port *port) temp &= ~(UCR2_TXEN); writel(temp, sport->port.membase + UCR2); + if (USE_IRDA(sport)) { + struct imxuart_platform_data *pdata; + pdata = sport->port.dev->platform_data; + if (pdata->irda_enable) + pdata->irda_enable(0); + } + /* * Stop our timer. */ @@ -648,7 +789,8 @@ static void imx_shutdown(struct uart_port *port) * Free the interrupts */ if (sport->txirq > 0) { - free_irq(sport->rtsirq, sport); + if (!USE_IRDA(sport)) + free_irq(sport->rtsirq, sport); free_irq(sport->txirq, sport); free_irq(sport->rxirq, sport); } else @@ -660,6 +802,9 @@ static void imx_shutdown(struct uart_port *port) temp = readl(sport->port.membase + UCR1); temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); + if (USE_IRDA(sport)) + temp &= ~(UCR1_IREN); + writel(temp, sport->port.membase + UCR1); } @@ -768,11 +913,19 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, sport->port.membase + UCR2); old_txrxen &= (UCR2_TXEN | UCR2_RXEN); - div = sport->port.uartclk / (baud * 16); - if (div > 7) - div = 7; - if (!div) + if (USE_IRDA(sport)) { + /* + * use maximum available submodule frequency to + * avoid missing short pulses due to low sampling rate + */ div = 1; + } else { + div = sport->port.uartclk / (baud * 16); + if (div > 7) + div = 7; + if (!div) + div = 1; + } rational_best_approximation(16 * div * baud, sport->port.uartclk, 1 << 16, 1 << 16, &num, &denom); @@ -781,8 +934,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, denom -= 1; ufcr = readl(sport->port.membase + UFCR); - ufcr = (ufcr & (~UFCR_RFDIV)) | - (div << 7); + ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div); writel(ufcr, sport->port.membase + UFCR); writel(num, sport->port.membase + UBIR); @@ -1141,6 +1293,11 @@ static int serial_imx_probe(struct platform_device *pdev) if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) sport->have_rtscts = 1; +#ifdef CONFIG_IRDA + if (pdata && (pdata->flags & IMXUART_IRDA)) + sport->use_irda = 1; +#endif + if (pdata->init) { ret = pdata->init(pdev); if (ret) -- cgit v1.2.2 From d7f8d437bda0ec409e26cffb846bc28a40603ee3 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 11 Jun 2009 14:55:22 +0100 Subject: imx: serial: use tty_encode_baud_rate to set true rate real baud rate may be different from the one requested. for upper layers, set the nearest value to the real rate in favour of the rate previously requested. Signed-off-by: Oskar Schirmer Signed-off-by: Linus Torvalds --- drivers/serial/imx.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 8c79e8c2fd4e..7b5d1de9cfe3 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -818,6 +818,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; unsigned int div, ufcr; unsigned long num, denom; + uint64_t tdiv64; /* * If we don't support modem control lines, don't allow @@ -930,6 +931,12 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, rational_best_approximation(16 * div * baud, sport->port.uartclk, 1 << 16, 1 << 16, &num, &denom); + tdiv64 = sport->port.uartclk; + tdiv64 *= num; + do_div(tdiv64, denom * 16 * div); + tty_encode_baud_rate(sport->port.info->port.tty, + (speed_t)tdiv64, (speed_t)tdiv64); + num -= 1; denom -= 1; -- cgit v1.2.2 From f0e8527726b9e56649b9eafde3bc0fbc4dd2dd47 Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Thu, 11 Jun 2009 14:56:44 +0100 Subject: moxa: prevent opening unavailable ports In moxa.c there are 32 minor numbers reserved for each device. The number of ports actually available per device is stored in moxa_board_conf->numPorts. This number is not considered in moxa_open(). Opening a port that is not available results in a kernel oops. This patch adds a test to moxa_open() that prevents opening unavailable ports. Signed-off-by: Dirk Eibach Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/moxa.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 4a4cab73d0be..65b6ff2442c6 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -1184,6 +1184,11 @@ static int moxa_open(struct tty_struct *tty, struct file *filp) return -ENODEV; } + if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) { + mutex_unlock(&moxa_openlock); + return -ENODEV; + } + ch = &brd->ports[port % MAX_PORTS_PER_BOARD]; ch->port.count++; tty->driver_data = ch; -- cgit v1.2.2