From 97a3b027b37bb7602529e21e37c629d45dd9dd93 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 9 Apr 2013 14:11:30 +0200 Subject: Documentation: dt: update TI GPMC ethernet binding properties The GPMC timing properties for device-tree have been updated by adding a "-ns" or "-ps" suffix to indicate the units of time the property represents. Therefore, update the timing property names for TI GPMC ethernet binding. Signed-off-by: Javier Martinez Canillas Signed-off-by: Jon Hunter --- Documentation/devicetree/bindings/net/gpmc-eth.txt | 56 +++++++++++----------- 1 file changed, 28 insertions(+), 28 deletions(-) diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt index 24cb4e46f675..ace4a64b3695 100644 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt @@ -26,16 +26,16 @@ Required properties: - bank-width: Address width of the device in bytes. GPMC supports 8-bit and 16-bit devices and so must be either 1 or 2 bytes. - compatible: Compatible string property for the ethernet child device. -- gpmc,cs-on: Chip-select assertion time -- gpmc,cs-rd-off: Chip-select de-assertion time for reads -- gpmc,cs-wr-off: Chip-select de-assertion time for writes -- gpmc,oe-on: Output-enable assertion time -- gpmc,oe-off Output-enable de-assertion time -- gpmc,we-on: Write-enable assertion time -- gpmc,we-off: Write-enable de-assertion time -- gpmc,access: Start cycle to first data capture (read access) -- gpmc,rd-cycle: Total read cycle time -- gpmc,wr-cycle: Total write cycle time +- gpmc,cs-on-ns: Chip-select assertion time +- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads +- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes +- gpmc,oe-on-ns: Output-enable assertion time +- gpmc,oe-off-ns: Output-enable de-assertion time +- gpmc,we-on-ns: Write-enable assertion time +- gpmc,we-off-ns: Write-enable de-assertion time +- gpmc,access-ns: Start cycle to first data capture (read access) +- gpmc,rd-cycle-ns: Total read cycle time +- gpmc,wr-cycle-ns: Total write cycle time - reg: Chip-select, base address (relative to chip-select) and size of the memory mapped for the device. Note that base address will be typically 0 as this @@ -65,24 +65,24 @@ gpmc: gpmc@6e000000 { bank-width = <2>; gpmc,mux-add-data; - gpmc,cs-on = <0>; - gpmc,cs-rd-off = <186>; - gpmc,cs-wr-off = <186>; - gpmc,adv-on = <12>; - gpmc,adv-rd-off = <48>; - gpmc,adv-wr-off = <48>; - gpmc,oe-on = <54>; - gpmc,oe-off = <168>; - gpmc,we-on = <54>; - gpmc,we-off = <168>; - gpmc,rd-cycle = <186>; - gpmc,wr-cycle = <186>; - gpmc,access = <114>; - gpmc,page-burst-access = <6>; - gpmc,bus-turnaround = <12>; - gpmc,cycle2cycle-delay = <18>; - gpmc,wr-data-mux-bus = <90>; - gpmc,wr-access = <186>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <186>; + gpmc,cs-wr-off-ns = <186>; + gpmc,adv-on-ns = <12>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <114>; + gpmc,page-burst-access-ns = <6>; + gpmc,bus-turnaround-ns = <12>; + gpmc,cycle2cycle-delay-ns = <18>; + gpmc,wr-data-mux-bus-ns = <90>; + gpmc,wr-access-ns = <186>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; -- cgit v1.2.2 From c059e0288c3875e0e9356e47b8477c2c74d72007 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 9 Apr 2013 11:37:40 -0500 Subject: Documentation: dt: update properties in TI GPMC NAND example The GPMC timing properties for device-tree have been updated by adding a "-ns" or "-ps" suffix to indicate the units of time the property represents. Therefore, update the timing property names for TI GPMC NAND example. Signed-off-by: Jon Hunter Acked-by: Grant Likely --- .../devicetree/bindings/mtd/gpmc-nand.txt | 28 +++++++++++----------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index e7f8d7ed47eb..6a983c1d87cd 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -56,20 +56,20 @@ Example for an AM33xx board: nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; - gpmc,sync-clk = <0>; - gpmc,cs-on = <0>; - gpmc,cs-rd-off = <44>; - gpmc,cs-wr-off = <44>; - gpmc,adv-on = <6>; - gpmc,adv-rd-off = <34>; - gpmc,adv-wr-off = <44>; - gpmc,we-off = <40>; - gpmc,oe-off = <54>; - gpmc,access = <64>; - gpmc,rd-cycle = <82>; - gpmc,wr-cycle = <82>; - gpmc,wr-access = <40>; - gpmc,wr-data-mux-bus = <0>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.2 From f2b09f67047aa5da60718f1a92e9b7f26b9266b4 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 17 Apr 2013 22:34:11 +0200 Subject: ARM: OMAP2+: only search for GPMC DT child nodes on probe The GPMC DT probe function use for_each_node_by_name() to search child device nodes of the GPMC controller. But this function does not use the GPMC device node as the root of the search and instead search across the complete Device Tree. This means that any device node on the DT that is using any of the GPMC child nodes names searched for will be returned even if they are not connected to the GPMC, making the gpmc_probe_xxx_child() function to fail. Fix this by using the GPMC device node as the search root so the search will be restricted to its children. Reported-by: Lars Poeschel Signed-off-by: Javier Martinez Canillas Signed-off-by: Jon Hunter --- arch/arm/mach-omap2/gpmc.c | 33 ++++++++++----------------------- 1 file changed, 10 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index ed946df5ad8a..6166847a3244 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1520,32 +1520,19 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } - for_each_node_by_name(child, "nand") { - ret = gpmc_probe_nand_child(pdev, child); - if (ret < 0) { - of_node_put(child); - return ret; - } - } + for_each_child_of_node(pdev->dev.of_node, child) { - for_each_node_by_name(child, "onenand") { - ret = gpmc_probe_onenand_child(pdev, child); - if (ret < 0) { - of_node_put(child); - return ret; - } - } + if (!child->name) + continue; - for_each_node_by_name(child, "nor") { - ret = gpmc_probe_generic_child(pdev, child); - if (ret < 0) { - of_node_put(child); - return ret; - } - } + if (of_node_cmp(child->name, "nand") == 0) + ret = gpmc_probe_nand_child(pdev, child); + else if (of_node_cmp(child->name, "onenand") == 0) + ret = gpmc_probe_onenand_child(pdev, child); + else if (of_node_cmp(child->name, "ethernet") == 0 || + of_node_cmp(child->name, "nor") == 0) + ret = gpmc_probe_generic_child(pdev, child); - for_each_node_by_name(child, "ethernet") { - ret = gpmc_probe_generic_child(pdev, child); if (ret < 0) { of_node_put(child); return ret; -- cgit v1.2.2 From b327b3627bb428eb7d98f25224532425a673d89e Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 17 Apr 2013 22:34:12 +0200 Subject: ARM: OMAP2+: only WARN if a GPMC child probe function fail If any of the GPMC child nodes fails, this shouldn't make the whole gpmc_probe_dt() function to fail. It is better to just WARN and allow other devices probe function to succeed. Signed-off-by: Javier Martinez Canillas Signed-off-by: Jon Hunter --- arch/arm/mach-omap2/gpmc.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 6166847a3244..6c4da1254f53 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1533,10 +1533,9 @@ static int gpmc_probe_dt(struct platform_device *pdev) of_node_cmp(child->name, "nor") == 0) ret = gpmc_probe_generic_child(pdev, child); - if (ret < 0) { + if (WARN(ret < 0, "%s: probing gpmc child %s failed\n", + __func__, child->full_name)) of_node_put(child); - return ret; - } } return 0; -- cgit v1.2.2 From cf7dd65811401e3d13fe662f2713860bd8cdb499 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 8 May 2013 16:48:00 -0700 Subject: ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx On Beagle xM Rev. Ax/Bx, the USB power enable GPIO logic is reversed when compared to other revisions i.e. it is active high instead of active low. Use the beagle_config.usb_pwr_level flag correctly so that the power regulator can be configured at runtime. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3beagle.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6de78605c0af..04c116555412 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -112,13 +112,13 @@ static u8 omap3_beagle_version; */ static struct { int mmc1_gpio_wp; - int usb_pwr_level; + bool usb_pwr_level; /* 0 - Active Low, 1 - Active High */ int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, - .usb_pwr_level = GPIOF_OUT_INIT_LOW, + .usb_pwr_level = 0, .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, @@ -178,7 +178,7 @@ static void __init omap3_beagle_init_rev(void) case 0: printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; - beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_config.usb_pwr_level = 1; beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; case 2: -- cgit v1.2.2 From e65f131a14726e5f1b880a528271a52428e5b3a5 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 8 May 2013 16:48:00 -0700 Subject: ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver) broke the SPI display/panel driver probe on RX-51/N900. The exact cause is not fully understood, but it seems to be related to the probe order. SPI communication to the panel driver (spi1.2) fails unless the touchscreen (spi1.0) has been probed/initialized before. When the omap2-mcspi driver was converted to a platform driver, it resulted in that the devices are probed immediately after the board registers them in the order they are listed in the board file. Fix the issue by moving the touchscreen before the panel in the SPI device list. The patch fixes the following failure: [ 1.260955] acx565akm spi1.2: invalid display ID [ 1.265899] panel-acx565akm display0: acx_panel_probe panel detect error [ 1.273071] omapdss CORE error: driver probe failed: -19 Tested-by: Sebastian Reichel Signed-off-by: Aaro Koskinen Cc: Pali Rohár Cc: Joni Lapilainen Cc: Tomi Valkeinen Cc: Felipe Balbi Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 1a884670a6c4..18ca61e300b3 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -73,11 +73,11 @@ #define LIS302_IRQ1_GPIO 181 #define LIS302_IRQ2_GPIO 180 /* Not yet in use */ -/* list all spi devices here */ +/* List all SPI devices here. Note that the list/probe order seems to matter! */ enum { RX51_SPI_WL1251, - RX51_SPI_MIPID, /* LCD panel */ RX51_SPI_TSC2005, /* Touch Controller */ + RX51_SPI_MIPID, /* LCD panel */ }; static struct wl12xx_platform_data wl1251_pdata; -- cgit v1.2.2 From e7e17c538604928b98107a08c2c5dc54745d85fe Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 8 May 2013 16:48:01 -0700 Subject: ARM: OMAP2+: omap_device: use late_initcall_sync If DEBUG_LL and earlyprintk are enabled, and omap-serial.c is compiled as a module, the kernel boot hangs early as the clocks for serial port are cut while earlyprintk still uses the port. The problem is a race between the late_initcall for omap_device (which idles devices that have no drivers) and the late_initcall in kernel/printk.c which turns off the earlyconsole. Any printks that happen between this omap_device late initcall and the earlyconsole late initcall will crash when accessing the UART. The fix is to ensure the omap_device initcall happens after the earlyconsole initcall. Reported-by: Tony Lindgren Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_device.c | 2 +- arch/arm/mach-omap2/soc.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index eeea4fa28fbc..e6d230700b2b 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -876,4 +876,4 @@ static int __init omap_device_late_init(void) bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle); return 0; } -omap_late_initcall(omap_device_late_init); +omap_late_initcall_sync(omap_device_late_init); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 18fdeeb3a44a..ea89594b7afa 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -496,6 +496,7 @@ level(__##fn); #define omap_subsys_initcall(fn) omap_initcall(subsys_initcall, fn) #define omap_device_initcall(fn) omap_initcall(device_initcall, fn) #define omap_late_initcall(fn) omap_initcall(late_initcall, fn) +#define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn) #endif /* __ASSEMBLY__ */ -- cgit v1.2.2 From 348c34225d4395b769ec6d283b0c7ace0b430a38 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 8 May 2013 16:48:02 -0700 Subject: ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init() Add the missing iounmap() before return from omap1_system_dma_init() in the error handling case. Also removed platform_device_del() on add resources error case which cause dup device delete. Signed-off-by: Wei Yongjun Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/dma.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 1a4e887f028d..68ab858e27b7 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -301,7 +301,7 @@ static int __init omap1_system_dma_init(void) if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", __func__, pdev->name, pdev->id); - goto exit_device_put; + goto exit_iounmap; } p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL); @@ -309,7 +309,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n", __func__, pdev->name); ret = -ENOMEM; - goto exit_device_del; + goto exit_iounmap; } d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL); @@ -402,8 +402,8 @@ exit_release_d: kfree(d); exit_release_p: kfree(p); -exit_device_del: - platform_device_del(pdev); +exit_iounmap: + iounmap(dma_base); exit_device_put: platform_device_put(pdev); -- cgit v1.2.2 From 27b105bb9906292720dd75f54136554a3b70ce19 Mon Sep 17 00:00:00 2001 From: Christoph Fritz Date: Wed, 8 May 2013 16:48:02 -0700 Subject: omap: mux: add AM/DM37x gpios This patch adds GPIO pins found on AM/DM37x. Signed-off-by: Christoph Fritz Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux34xx.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h index 6543ebf8ecfc..3f26d297c082 100644 --- a/arch/arm/mach-omap2/mux34xx.h +++ b/arch/arm/mach-omap2/mux34xx.h @@ -393,6 +393,10 @@ #define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c #define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e #define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20 +#define OMAP3_CONTROL_PADCONF_GPIO_127 0xa24 +#define OMAP3_CONTROL_PADCONF_GPIO_126 0xa26 +#define OMAP3_CONTROL_PADCONF_GPIO_128 0xa28 +#define OMAP3_CONTROL_PADCONF_GPIO_129 0xa2a #define OMAP3_CONTROL_PADCONF_MUX_SIZE \ - (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2) + (OMAP3_CONTROL_PADCONF_GPIO_129 + 0x2) -- cgit v1.2.2 From d240ef3056528785a28ad9b3e5013205b06e7d03 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Wed, 8 May 2013 16:48:02 -0700 Subject: ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si Add support for chip id detection of AM335x PG2.1 Silicon. Currently omap3xxx_check_revision() detects PG1.0 and PG2.0 only, this patch extends it by adding PG2.1 Si support. Signed-off-by: Vaibhav Hiremath Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 8 ++++++-- arch/arm/mach-omap2/soc.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 0f4c18e6e60c..9bc5a18794f9 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -419,11 +419,15 @@ void __init omap3xxx_check_revision(void) cpu_rev = "1.0"; break; case 1: - /* FALLTHROUGH */ - default: omap_revision = AM335X_REV_ES2_0; cpu_rev = "2.0"; break; + case 2: + /* FALLTHROUGH */ + default: + omap_revision = AM335X_REV_ES2_1; + cpu_rev = "2.1"; + break; } break; case 0xb8f2: diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index ea89594b7afa..197cc16870d9 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -396,6 +396,7 @@ IS_OMAP_TYPE(3430, 0x3430) #define AM335X_CLASS 0x33500033 #define AM335X_REV_ES1_0 AM335X_CLASS #define AM335X_REV_ES2_0 (AM335X_CLASS | (0x1 << 8)) +#define AM335X_REV_ES2_1 (AM335X_CLASS | (0x2 << 8)) #define OMAP443X_CLASS 0x44300044 #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8)) -- cgit v1.2.2 From 827897c05c3da95dcd0ae44549563525a3554e00 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 8 May 2013 16:48:02 -0700 Subject: ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module Boards supported upstream all use TWL6040 as audio codec, enable the common ASoC machine driver by default for them. Signed-off-by: Peter Ujfalusi Tested-by: Jyri Sarha Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 33903ca0d879..3838ce0f13f7 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -153,6 +153,7 @@ CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y +CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y @@ -195,6 +196,7 @@ CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_OMAP_SOC=m CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y CONFIG_USB_DEBUG=y -- cgit v1.2.2 From b1dd11d60e5357c13d3f3decfb69bd07dde159bd Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 9 May 2013 08:27:25 -0700 Subject: ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c Commit 6770b211 (ARM: OMAP2+: Export SoC information to userspace) had some broken return value handling as noted by Russell King: + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + if (!IS_ERR_OR_NULL(parent)) + device_create_file(parent, &omap_soc_attr); This is nonsense. For the first, IS_ERR() is sufficient. For the second, tell me what error checking is required in the return value of this function: struct device *soc_device_to_device(struct soc_device *soc_dev) { return &soc_dev->dev; } when you've already determined that the passed soc_dev is a valid pointer. If you read the comments against the prototype: /** * soc_device_to_device - helper function to fetch struct device * @soc: Previously registered SoC device container */ struct device *soc_device_to_device(struct soc_device *soc); if "soc" is valid, it means the "previously registered SoC device container" must have succeeded and that can only happen if the struct device has been registered. Ergo, there will always be a valid struct device pointer for any registered SoC device container. Therefore, if soc_device_register() succeeds, then the return value from soc_device_to_device() will always be valid and no error checking of it is required. Simples. The rule as ever applies here: get to know the APIs your using and don't fumble around in the dark hoping that you'll get this stuff right. Fix it as noted by Russell. Reported-by: Russell King Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 9bc5a18794f9..1272c41d4749 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -648,13 +648,12 @@ void __init omap_soc_device_init(void) soc_dev_attr->revision = soc_rev; soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR_OR_NULL(soc_dev)) { + if (IS_ERR(soc_dev)) { kfree(soc_dev_attr); return; } parent = soc_device_to_device(soc_dev); - if (!IS_ERR_OR_NULL(parent)) - device_create_file(parent, &omap_soc_attr); + device_create_file(parent, &omap_soc_attr); } #endif /* CONFIG_SOC_BUS */ -- cgit v1.2.2