From 16d3ea26f82271fef9b1c4523b5e1ea31fa39eec Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 10 Sep 2010 01:20:27 -0400 Subject: [SCSI] Fix VPD inquiry page wrapper Fix two bugs in the VPD page wrapper: - Don't return failure if the user asked for page 0 - The end of buffer check failed to account for the page header size and consequently didn't work Signed-off-by: Martin K. Petersen Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/scsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index ad0ed212db4a..348fba0a8976 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -1046,13 +1046,13 @@ int scsi_get_vpd_page(struct scsi_device *sdev, u8 page, unsigned char *buf, /* If the user actually wanted this page, we can skip the rest */ if (page == 0) - return -EINVAL; + return 0; for (i = 0; i < min((int)buf[3], buf_len - 4); i++) if (buf[i + 4] == page) goto found; - if (i < buf[3] && i > buf_len) + if (i < buf[3] && i >= buf_len - 4) /* ran off the end of the buffer, give us benefit of doubt */ goto found; /* The device claims it doesn't support the requested page */ -- cgit v1.2.2 From d20d5ffab92f00188f360c44c791a5ffb988247c Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Tue, 5 Oct 2010 17:20:16 +0200 Subject: HID: hidraw, fix a NULL pointer dereference in hidraw_ioctl BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [] hidraw_ioctl+0xfc/0x32c [hid] [...] This is reproducible by disconnecting the device while userspace does ioctl in a loop and doesn't check return values in order to exit the loop. Signed-off-by: Antonio Ospite Cc: stable@kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 47d70c523d93..9eaf6ae5f97f 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -244,6 +244,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, mutex_lock(&minors_lock); dev = hidraw_table[minor]; + if (!dev) { + ret = -ENODEV; + goto out; + } switch (cmd) { case HIDIOCGRDESCSIZE: @@ -317,6 +321,7 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, ret = -ENOTTY; } +out: mutex_unlock(&minors_lock); return ret; } -- cgit v1.2.2 From e42dee9a99a3ecd32b5c027e8f7411fb5bc11eb6 Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Tue, 5 Oct 2010 17:20:17 +0200 Subject: HID: hidraw, fix a NULL pointer dereference in hidraw_write BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [] hidraw_write+0x3b/0x116 [hid] [...] This is reproducible by disconnecting the device while userspace writes to dev node in a loop and doesn't check return values in order to exit the loop. Signed-off-by: Antonio Ospite Cc: stable@kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 9eaf6ae5f97f..a3866b5c0c43 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -109,6 +109,12 @@ static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t int ret = 0; mutex_lock(&minors_lock); + + if (!hidraw_table[minor]) { + ret = -ENODEV; + goto out; + } + dev = hidraw_table[minor]->hid; if (!dev->hid_output_raw_report) { -- cgit v1.2.2 From e1f092102f65e424be40c318a0fab7bb6e34194f Mon Sep 17 00:00:00 2001 From: Pierre BAILLY Date: Tue, 12 Oct 2010 11:39:26 +0200 Subject: HID: Add MULTI_INPUT quirk for turbox/mosart touchscreen This device generates ABS_Z and ABS_RX events, while it should be generating ABS_X and ABS_Y instead. Using the MULTI_INPUT quirk solves this issue. Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/ Signed-off-by: Pierre BAILLY Signed-off-by: Anisse Astier Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 765a4f53eb5c..a577121e42b5 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -503,6 +503,7 @@ #define USB_VENDOR_ID_TURBOX 0x062a #define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201 +#define USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART 0x7100 #define USB_VENDOR_ID_TWINHAN 0x6253 #define USB_DEVICE_ID_TWINHAN_IR_REMOTE 0x0100 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 70da3181c8a0..f0260c699adb 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -36,6 +36,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_DWAV, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER, HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET }, { USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_MOJO, USB_DEVICE_ID_RETRO_ADAPTER, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT }, -- cgit v1.2.2 From 93055c31045a2d5599ec613a0c6cdcefc481a460 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 11 Oct 2010 21:41:35 +0200 Subject: ps3disk: passing wrong variable to bvec_kunmap_irq() This should pass "buf" to bvec_kunmap_irq() instead of "bv". The api is like kmap_atomic() instead of kmap(). Signed-off-by: Dan Carpenter Acked-by: Geoff Levand Signed-off-by: Jens Axboe --- drivers/block/ps3disk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index e9da874d0419..03688c2da319 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -113,7 +113,7 @@ static void ps3disk_scatter_gather(struct ps3_storage_device *dev, memcpy(buf, dev->bounce_buf+offset, size); offset += size; flush_kernel_dcache_page(bvec->bv_page); - bvec_kunmap_irq(bvec, &flags); + bvec_kunmap_irq(buf, &flags); i++; } } -- cgit v1.2.2 From 272036edb77e5967c175ac48b8c88e9b3358285f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fran=C3=A7ois=20Jaouen?= Date: Wed, 13 Oct 2010 10:47:32 +0200 Subject: HID: Add Cando touch screen 15.6-inch product id This add the product id of the touch screen found on ACER Aspire 5738PZ. Works with hid-cando driver. Signed-off-by: Francois Jaouen Signed-off-by: Jiri Kosina --- drivers/hid/hid-cando.c | 2 ++ drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 1 + 3 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-cando.c b/drivers/hid/hid-cando.c index 4267a6fdc277..5925bdcd417d 100644 --- a/drivers/hid/hid-cando.c +++ b/drivers/hid/hid-cando.c @@ -237,6 +237,8 @@ static const struct hid_device_id cando_devices[] = { USB_DEVICE_ID_CANDO_MULTI_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, + USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) }, { } }; MODULE_DEVICE_TABLE(hid, cando_devices); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 3f7292486024..a0dea3d1296e 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1292,6 +1292,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index a577121e42b5..c5ae5f1545bd 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -134,6 +134,7 @@ #define USB_VENDOR_ID_CANDO 0x2087 #define USB_DEVICE_ID_CANDO_MULTI_TOUCH 0x0a01 #define USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6 0x0b03 +#define USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6 0x0f01 #define USB_VENDOR_ID_CH 0x068e #define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2 -- cgit v1.2.2 From f13d4f979c518119bba5439dd2364d76d31dcd3f Mon Sep 17 00:00:00 2001 From: Salman Qazi Date: Tue, 12 Oct 2010 07:25:19 -0700 Subject: hrtimer: Preserve timer state in remove_hrtimer() The race is described as follows: CPU X CPU Y remove_hrtimer // state & QUEUED == 0 timer->state = CALLBACK unlock timer base timer->f(n) //very long hrtimer_start lock timer base remove_hrtimer // no effect hrtimer_enqueue timer->state = CALLBACK | QUEUED unlock timer base hrtimer_start lock timer base remove_hrtimer mode = INACTIVE // CALLBACK bit lost! switch_hrtimer_base CALLBACK bit not set: timer->base changes to a different CPU. lock this CPU's timer base The bug was introduced with commit ca109491f (hrtimer: removing all ur callback modes) in 2.6.29 [ tglx: Feed new state via local variable and add a comment. ] Signed-off-by: Salman Qazi Cc: akpm@linux-foundation.org Cc: Peter Zijlstra LKML-Reference: <20101012142351.8485.21823.stgit@dungbeetle.mtv.corp.google.com> Signed-off-by: Thomas Gleixner Cc: stable@kernel.org --- kernel/hrtimer.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 1decafbb6b1a..72206cf5c6cf 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -931,6 +931,7 @@ static inline int remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base) { if (hrtimer_is_queued(timer)) { + unsigned long state; int reprogram; /* @@ -944,8 +945,13 @@ remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base) debug_deactivate(timer); timer_stats_hrtimer_clear_start_info(timer); reprogram = base->cpu_base == &__get_cpu_var(hrtimer_bases); - __remove_hrtimer(timer, base, HRTIMER_STATE_INACTIVE, - reprogram); + /* + * We must preserve the CALLBACK state flag here, + * otherwise we could move the timer base in + * switch_hrtimer_base. + */ + state = timer->state & HRTIMER_STATE_CALLBACK; + __remove_hrtimer(timer, base, state, reprogram); return 1; } return 0; @@ -1231,6 +1237,9 @@ static void __run_hrtimer(struct hrtimer *timer, ktime_t *now) BUG_ON(timer->state != HRTIMER_STATE_CALLBACK); enqueue_hrtimer(timer, base); } + + WARN_ON_ONCE(!(timer->state & HRTIMER_STATE_CALLBACK)); + timer->state &= ~HRTIMER_STATE_CALLBACK; } -- cgit v1.2.2 From 8fd01d6cfbf75465d84a4e533ed70c5f57b3ff51 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 14 Oct 2010 19:15:28 -0700 Subject: Export dump_{write,seek} to binary loader modules If you build aout support as a module, you'll want these exported. Reported-by: Tetsuo Handa Signed-off-by: Linus Torvalds --- fs/exec.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/exec.c b/fs/exec.c index 03278c984ba0..6d2b6f936858 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -2024,6 +2024,7 @@ int dump_write(struct file *file, const void *addr, int nr) { return access_ok(VERIFY_READ, addr, nr) && file->f_op->write(file, addr, nr, &file->f_pos) == nr; } +EXPORT_SYMBOL(dump_write); int dump_seek(struct file *file, loff_t off) { @@ -2052,3 +2053,4 @@ int dump_seek(struct file *file, loff_t off) } return ret; } +EXPORT_SYMBOL(dump_seek); -- cgit v1.2.2 From 47526903feb52f4c26a6350370bdf74e337fcdb1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 15 Oct 2010 12:56:21 +0200 Subject: ubd: fix incorrect sector handling during request restart Commit f81f2f7c (ubd: drop unnecessary rq->sector manipulation) dropped request->sector manipulation in preparation for global request handling cleanup; unfortunately, it incorrectly assumed that the updated sector wasn't being used. ubd tries to issue as many requests as possible to io_thread. When issuing fails due to memory pressure or other reasons, the device is put on the restart list and issuing stops. On IO completion, devices on the restart list are scanned and IO issuing is restarted. ubd issues IOs sg-by-sg and issuing can be stopped in the middle of a request, so each device on the restart queue needs to remember where to restart in its current request. ubd needs to keep track of the issue position itself because, * blk_rq_pos(req) is now updated by the block layer to keep track of _completion_ position. * Multiple io_req's for the current request may be in flight, so it's difficult to tell where blk_rq_pos(req) currently is. Add ubd->rq_pos to keep track of the issue position and use it to correctly restart io_req issue. Signed-off-by: Tejun Heo Reported-by: Richard Weinberger Tested-by: Richard Weinberger Tested-by: Chris Frey Cc: stable@kernel.org Signed-off-by: Jens Axboe --- arch/um/drivers/ubd_kern.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 1bcd208c459f..9734994cba1e 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -163,6 +163,7 @@ struct ubd { struct scatterlist sg[MAX_SG]; struct request *request; int start_sg, end_sg; + sector_t rq_pos; }; #define DEFAULT_COW { \ @@ -187,6 +188,7 @@ struct ubd { .request = NULL, \ .start_sg = 0, \ .end_sg = 0, \ + .rq_pos = 0, \ } /* Protected by ubd_lock */ @@ -1228,7 +1230,6 @@ static void do_ubd_request(struct request_queue *q) { struct io_thread_req *io_req; struct request *req; - sector_t sector; int n; while(1){ @@ -1239,12 +1240,12 @@ static void do_ubd_request(struct request_queue *q) return; dev->request = req; + dev->rq_pos = blk_rq_pos(req); dev->start_sg = 0; dev->end_sg = blk_rq_map_sg(q, req, dev->sg); } req = dev->request; - sector = blk_rq_pos(req); while(dev->start_sg < dev->end_sg){ struct scatterlist *sg = &dev->sg[dev->start_sg]; @@ -1256,10 +1257,9 @@ static void do_ubd_request(struct request_queue *q) return; } prepare_request(req, io_req, - (unsigned long long)sector << 9, + (unsigned long long)dev->rq_pos << 9, sg->offset, sg->length, sg_page(sg)); - sector += sg->length >> 9; n = os_write_file(thread_fd, &io_req, sizeof(struct io_thread_req *)); if(n != sizeof(struct io_thread_req *)){ @@ -1272,6 +1272,7 @@ static void do_ubd_request(struct request_queue *q) return; } + dev->rq_pos += sg->length >> 9; dev->start_sg++; } dev->end_sg = 0; -- cgit v1.2.2 From 478971600e47cb83ff2d3c63c5c24f2b04b0d6a1 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 17 Sep 2010 00:46:42 +0900 Subject: [SCSI] bsg: fix incorrect device_status value bsg incorrectly returns sg's masked_status value for device_status. [jejb: fix up expression logic] Reported-by: Douglas Gilbert Signed-off-by: FUJITA Tomonori Cc: Stable Tree Signed-off-by: James Bottomley --- block/bsg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/bsg.c b/block/bsg.c index 82d58829ba59..0c00870553a3 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -426,7 +426,7 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr, /* * fill in all the output members */ - hdr->device_status = status_byte(rq->errors); + hdr->device_status = rq->errors & 0xff; hdr->transport_status = host_byte(rq->errors); hdr->driver_status = driver_byte(rq->errors); hdr->info = 0; -- cgit v1.2.2 From 1c8cf9c997a4a6b36e907c7ede5f048aeaab1644 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Wed, 13 Oct 2010 09:31:56 +0200 Subject: mmc: sdio: fix SDIO suspend/resume regression Fix SDIO suspend/resume regression introduced by 4c2ef25fe0b "mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resume": PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) pm_op(): platform_pm_suspend+0x0/0x5c returns -38 PM: Device pxa2xx-mci.0 failed to suspend: error -38 PM: Some devices failed to suspend 4c2ef25fe0b moved the card removal/insertion mechanism out of MMC's suspend/resume path and into pm notifiers (mmc_pm_notify), and that broke SDIO's expectation that mmc_suspend_host() will remove the card, and squash the error, in case -ENOSYS is returned from the bus suspend handler (mmc_sdio_suspend() in this case). mmc_sdio_suspend() is using this whenever at least one of the card's SDIO function drivers does not have suspend/resume handlers - in that case it is agreed to force removal of the entire card. This patch fixes this regression by trivially bringing back that part of mmc_suspend_host(), which was removed by 4c2ef25fe0b. Reported-and-tested-by: Sven Neumann Signed-off-by: Ohad Ben-Cohen Cc: Maxim Levitsky Cc: Acked-by: Nicolas Pitre Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 5db49b124ffa..09eee6df0653 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1631,6 +1631,19 @@ int mmc_suspend_host(struct mmc_host *host) if (host->bus_ops && !host->bus_dead) { if (host->bus_ops->suspend) err = host->bus_ops->suspend(host); + if (err == -ENOSYS || !host->bus_ops->resume) { + /* + * We simply "remove" the card in this case. + * It will be redetected on resume. + */ + if (host->bus_ops->remove) + host->bus_ops->remove(host); + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_release_host(host); + host->pm_flags = 0; + err = 0; + } } mmc_bus_put(host); -- cgit v1.2.2 From 799c10559d60f159ab2232203f222f18fa3c4a5f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 15 Oct 2010 11:09:28 -0700 Subject: De-pessimize rds_page_copy_user Don't try to "optimize" rds_page_copy_user() by using kmap_atomic() and the unsafe atomic user mode accessor functions. It's actually slower than the straightforward code on any reasonable modern CPU. Back when the code was written (although probably not by the time it was actually merged, though), 32-bit x86 may have been the dominant architecture. And there kmap_atomic() can be a lot faster than kmap() (unless you have very good locality, in which case the virtual address caching by kmap() can overcome all the downsides). But these days, x86-64 may not be more populous, but it's getting there (and if you care about performance, it's definitely already there - you'd have upgraded your CPU's already in the last few years). And on x86-64, the non-kmap_atomic() version is faster, simply because the code is simpler and doesn't have the "re-try page fault" case. People with old hardware are not likely to care about RDS anyway, and the optimization for the 32-bit case is simply buggy, since it doesn't verify the user addresses properly. Reported-by: Dan Rosenberg Acked-by: Andrew Morton Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- net/rds/page.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) diff --git a/net/rds/page.c b/net/rds/page.c index 595a952d4b17..1dfbfea12e9b 100644 --- a/net/rds/page.c +++ b/net/rds/page.c @@ -57,30 +57,17 @@ int rds_page_copy_user(struct page *page, unsigned long offset, unsigned long ret; void *addr; - if (to_user) + addr = kmap(page); + if (to_user) { rds_stats_add(s_copy_to_user, bytes); - else + ret = copy_to_user(ptr, addr + offset, bytes); + } else { rds_stats_add(s_copy_from_user, bytes); - - addr = kmap_atomic(page, KM_USER0); - if (to_user) - ret = __copy_to_user_inatomic(ptr, addr + offset, bytes); - else - ret = __copy_from_user_inatomic(addr + offset, ptr, bytes); - kunmap_atomic(addr, KM_USER0); - - if (ret) { - addr = kmap(page); - if (to_user) - ret = copy_to_user(ptr, addr + offset, bytes); - else - ret = copy_from_user(addr + offset, ptr, bytes); - kunmap(page); - if (ret) - return -EFAULT; + ret = copy_from_user(addr + offset, ptr, bytes); } + kunmap(page); - return 0; + return ret ? -EFAULT : 0; } EXPORT_SYMBOL_GPL(rds_page_copy_user); -- cgit v1.2.2 From 3e645d6b485446c54c6745c5e2cf5c528fe4deec Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 15 Oct 2010 11:12:38 -0700 Subject: v4l1: fix 32-bit compat microcode loading translation The compat code for the VIDIOCSMICROCODE ioctl is totally buggered. It's only used by the VIDEO_STRADIS driver, and that one is scheduled to staging and eventually removed unless somebody steps up to maintain it (at which point it should use request_firmware() rather than some magic ioctl). So we'll get rid of it eventually. But in the meantime, the compatibility ioctl code is broken, and this tries to get it to at least limp along (even if Mauro suggested just deleting it entirely, which may be the right thing to do - I don't think the compatibility translation code has ever worked unless you were very lucky). Reported-by: Kees Cook Cc: Mauro Carvalho Chehab Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/media/video/v4l2-compat-ioctl32.c | 32 ++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c index 073f01390cdd..86294ed35c9b 100644 --- a/drivers/media/video/v4l2-compat-ioctl32.c +++ b/drivers/media/video/v4l2-compat-ioctl32.c @@ -193,17 +193,24 @@ static int put_video_window32(struct video_window *kp, struct video_window32 __u struct video_code32 { char loadwhat[16]; /* name or tag of file being passed */ compat_int_t datasize; - unsigned char *data; + compat_uptr_t data; }; -static int get_microcode32(struct video_code *kp, struct video_code32 __user *up) +static struct video_code __user *get_microcode32(struct video_code32 *kp) { - if (!access_ok(VERIFY_READ, up, sizeof(struct video_code32)) || - copy_from_user(kp->loadwhat, up->loadwhat, sizeof(up->loadwhat)) || - get_user(kp->datasize, &up->datasize) || - copy_from_user(kp->data, up->data, up->datasize)) - return -EFAULT; - return 0; + struct video_code __user *up; + + up = compat_alloc_user_space(sizeof(*up)); + + /* + * NOTE! We don't actually care if these fail. If the + * user address is invalid, the native ioctl will do + * the error handling for us + */ + (void) copy_to_user(up->loadwhat, kp->loadwhat, sizeof(up->loadwhat)); + (void) put_user(kp->datasize, &up->datasize); + (void) put_user(compat_ptr(kp->data), &up->data); + return up; } #define VIDIOCGTUNER32 _IOWR('v', 4, struct video_tuner32) @@ -739,7 +746,7 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar struct video_tuner vt; struct video_buffer vb; struct video_window vw; - struct video_code vc; + struct video_code32 vc; struct video_audio va; #endif struct v4l2_format v2f; @@ -818,8 +825,11 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar break; case VIDIOCSMICROCODE: - err = get_microcode32(&karg.vc, up); - compatible_arg = 0; + /* Copy the 32-bit "video_code32" to kernel space */ + if (copy_from_user(&karg.vc, up, sizeof(karg.vc))) + return -EFAULT; + /* Convert the 32-bit version to a 64-bit version in user space */ + up = get_microcode32(&karg.vc); break; case VIDIOCSFREQ: -- cgit v1.2.2 From a9febbb4bd1302b6f01aa1203b0a804e4e5c9e25 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 15 Oct 2010 14:34:12 -0700 Subject: sysctl: min/max bounds are optional sysctl check complains with a WARN() when proc_doulongvec_minmax() or proc_doulongvec_ms_jiffies_minmax() are used by a vector of longs (with more than one element), with no min or max value specified. This is unexpected, given we had a bug on this min/max handling :) Reported-by: Jiri Slaby Signed-off-by: Eric Dumazet Cc: "Eric W. Biederman" Cc: David Miller Acked-by: WANG Cong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sysctl_check.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c index 04cdcf72c827..10b90d8a03c4 100644 --- a/kernel/sysctl_check.c +++ b/kernel/sysctl_check.c @@ -143,15 +143,6 @@ int sysctl_check_table(struct nsproxy *namespaces, struct ctl_table *table) if (!table->maxlen) set_fail(&fail, table, "No maxlen"); } - if ((table->proc_handler == proc_doulongvec_minmax) || - (table->proc_handler == proc_doulongvec_ms_jiffies_minmax)) { - if (table->maxlen > sizeof (unsigned long)) { - if (!table->extra1) - set_fail(&fail, table, "No min"); - if (!table->extra2) - set_fail(&fail, table, "No max"); - } - } #ifdef CONFIG_PROC_SYSCTL if (table->procname && !table->proc_handler) set_fail(&fail, table, "No proc_handler"); -- cgit v1.2.2 From e3c6cf61815b0af0c697aeed4c6f11762f913002 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 15 Oct 2010 14:34:13 -0700 Subject: uml: fix build MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a build error introduced by d6d1b650ae6acce73d55dd024 ("param: simple locking for sysfs-writable charp parameters"). CC arch/um/kernel/trap.o arch/um/drivers/hostaudio_kern.c: In function 'hostaudio_open': arch/um/drivers/hostaudio_kern.c:204: error: '__param_dsp' undeclared (first use in this function) arch/um/drivers/hostaudio_kern.c:204: error: (Each undeclared identifier is reported only once arch/um/drivers/hostaudio_kern.c:204: error: for each function it appears in.) arch/um/drivers/hostaudio_kern.c: In function 'hostmixer_open_mixdev': arch/um/drivers/hostaudio_kern.c:265: error: '__param_mixer' undeclared (first use in this function) arch/um/drivers/hostaudio_kern.c:272: error: '__param_dsp' undeclared (first use in this function) Reported-by: Toralf Förster Tested-by: Toralf Förster Cc: Rusty Russell Cc: Takashi Iwai Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/hostaudio_kern.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c index 0c46e398cd8f..63c740a85b4c 100644 --- a/arch/um/drivers/hostaudio_kern.c +++ b/arch/um/drivers/hostaudio_kern.c @@ -40,6 +40,11 @@ static char *mixer = HOSTAUDIO_DEV_MIXER; " This is used to specify the host mixer device to the hostaudio driver.\n"\ " The default is \"" HOSTAUDIO_DEV_MIXER "\".\n\n" +module_param(dsp, charp, 0644); +MODULE_PARM_DESC(dsp, DSP_HELP); +module_param(mixer, charp, 0644); +MODULE_PARM_DESC(mixer, MIXER_HELP); + #ifndef MODULE static int set_dsp(char *name, int *add) { @@ -56,15 +61,6 @@ static int set_mixer(char *name, int *add) } __uml_setup("mixer=", set_mixer, "mixer=\n" MIXER_HELP); - -#else /*MODULE*/ - -module_param(dsp, charp, 0644); -MODULE_PARM_DESC(dsp, DSP_HELP); - -module_param(mixer, charp, 0644); -MODULE_PARM_DESC(mixer, MIXER_HELP); - #endif /* /dev/dsp file operations */ -- cgit v1.2.2 From 79b5dc0c64d88cda3da23b2e22a5cec0964372ac Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Fri, 15 Oct 2010 14:34:14 -0700 Subject: types.h: define __aligned_u64 and expose to userspace We currently have a kernel internal type called aligned_u64 which aligns __u64's on 8 bytes boundaries even on systems which would normally align them on 4 byte boundaries. This patch creates a new type __aligned_u64 which does the same thing but which is exposed to userspace rather than being kernel internal. [akpm: merge early as both the net and audit trees want this] [akpm@linux-foundation.org: enhance the comment describing the reasons for using aligned_u64. Via Andreas and Andi.] Based-on-patch-by: Andreas Gruenbacher Signed-off-by: Eric Paris Cc: Jan Engelhardt Cc: David Miller Cc: Andi Kleen Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/types.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/include/linux/types.h b/include/linux/types.h index 01a082f56ef4..357dbc19606f 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -121,7 +121,15 @@ typedef __u64 u_int64_t; typedef __s64 int64_t; #endif -/* this is a special 64bit data type that is 8-byte aligned */ +/* + * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid + * common 32/64-bit compat problems. + * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other + * architectures) and to 8-byte boundaries on 64-bit architetures. The new + * aligned_64 type enforces 8-byte alignment so that structs containing + * aligned_64 values have the same alignment on 32-bit and 64-bit architectures. + * No conversions are necessary between 32-bit user-space and a 64-bit kernel. + */ #define aligned_u64 __u64 __attribute__((aligned(8))) #define aligned_be64 __be64 __attribute__((aligned(8))) #define aligned_le64 __le64 __attribute__((aligned(8))) @@ -178,6 +186,11 @@ typedef __u64 __bitwise __be64; typedef __u16 __bitwise __sum16; typedef __u32 __bitwise __wsum; +/* this is a special 64bit data type that is 8-byte aligned */ +#define __aligned_u64 __u64 __attribute__((aligned(8))) +#define __aligned_be64 __be64 __attribute__((aligned(8))) +#define __aligned_le64 __le64 __attribute__((aligned(8))) + #ifdef __KERNEL__ typedef unsigned __bitwise__ gfp_t; typedef unsigned __bitwise__ fmode_t; -- cgit v1.2.2 From 99d6734f3ca66c17b81df85724953a9b29eff7cf Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 15 Oct 2010 21:16:45 -0400 Subject: m32r: restore _BLOCKABLE Commit a7f8388e accidentally removed it... Al explains: "Sorry, reordering breakage. In the signals tree here I have static inline void sig_set_blocked(struct sigset_t *set) ... and it's used all over the place (including quite a few places where we currently have sigprocmask(SIG_SETMASK, set, NULL), which is what it's equivalent to). With that done, m32r doesn't use _BLOCKABLE anywhere, so it got removed. And that chunk got picked when I'd been reordering the queue to pull the arch-specific fixes in front. Sorry." Signed-off-by: Kyle McMartin Cc: Al Viro Signed-off-by: Linus Torvalds --- arch/m32r/kernel/signal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index 7bbe38645ed5..cc36fe149255 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -28,6 +28,8 @@ #define DEBUG_SIG 0 +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, unsigned long r2, unsigned long r3, unsigned long r4, -- cgit v1.2.2 From 388d148fe89cbdd99ec6bcab6cf34480e74c50ee Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 15 Oct 2010 21:17:09 -0400 Subject: m32r: get_user takes an lvalue, not a pointer Signed-off-by: Kyle McMartin Acked-by: Al "my fuckup" Viro Signed-off-by: Linus Torvalds --- arch/m32r/kernel/signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index cc36fe149255..a08697f0886d 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -256,7 +256,7 @@ give_sigsegv: static int prev_insn(struct pt_regs *regs) { u16 inst; - if (get_user(&inst, (u16 __user *)(regs->bpc - 2))) + if (get_user(inst, (u16 __user *)(regs->bpc - 2))) return -EFAULT; if ((inst & 0xfff0) == 0x10f0) /* trap ? */ regs->bpc -= 2; -- cgit v1.2.2 From 4f515cc93248face6ba45dd296dc3e7381848ab7 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 15 Oct 2010 21:17:13 -0400 Subject: m32r: add kernel/.gitignore and ignore vmlinux.lds Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds --- arch/m32r/kernel/.gitignore | 1 + 1 file changed, 1 insertion(+) create mode 100644 arch/m32r/kernel/.gitignore diff --git a/arch/m32r/kernel/.gitignore b/arch/m32r/kernel/.gitignore new file mode 100644 index 000000000000..c5f676c3c224 --- /dev/null +++ b/arch/m32r/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds -- cgit v1.2.2 From 2d019713b7acbc01d769a1e512ca1f9a04c30bd0 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 15 Oct 2010 21:17:16 -0400 Subject: m32r: test __LITTLE_ENDIAN__ instead of __LITTLE_ENDIAN Fixes build for me... these are what's tested in byteorder.h... Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds --- arch/m32r/include/asm/elf.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/m32r/include/asm/elf.h b/arch/m32r/include/asm/elf.h index 2f85412ef730..b8da7d0574d2 100644 --- a/arch/m32r/include/asm/elf.h +++ b/arch/m32r/include/asm/elf.h @@ -82,9 +82,9 @@ typedef elf_fpreg_t elf_fpregset_t; * These are used to set parameters in the core dumps. */ #define ELF_CLASS ELFCLASS32 -#if defined(__LITTLE_ENDIAN) +#if defined(__LITTLE_ENDIAN__) #define ELF_DATA ELFDATA2LSB -#elif defined(__BIG_ENDIAN) +#elif defined(__BIG_ENDIAN__) #define ELF_DATA ELFDATA2MSB #else #error no endian defined -- cgit v1.2.2 From aa73aec6c385e2c797ac25cc7ccf0318031de7c8 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 15 Oct 2010 12:06:18 +0200 Subject: ALSA: rawmidi: fix oops (use after free) when unloading a driver module When a driver module is unloaded and the last still open file is a raw MIDI device, the card and its devices will be actually freed in the snd_card_file_remove() call when that file is closed. Afterwards, rmidi and rmidi->card point into freed memory, so the module pointer is likely to be garbage. (This was introduced by commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a.) Signed-off-by: Clemens Ladisch Reported-by: Krzysztof Foltman Cc: 2.6.30-2.6.35 Signed-off-by: Takashi Iwai --- sound/core/rawmidi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index a7868ad4d530..cbbed0db9e56 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -535,13 +535,15 @@ static int snd_rawmidi_release(struct inode *inode, struct file *file) { struct snd_rawmidi_file *rfile; struct snd_rawmidi *rmidi; + struct module *module; rfile = file->private_data; rmidi = rfile->rmidi; rawmidi_release_priv(rfile); kfree(rfile); + module = rmidi->card->module; snd_card_file_remove(rmidi->card, file); - module_put(rmidi->card->module); + module_put(module); return 0; } -- cgit v1.2.2 From aa0170fff3c26bf2b42159af2dd9cf86444c292a Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 17 Oct 2010 14:09:12 +0200 Subject: firewire: ohci: fix TI TSB82AA2 regression since 2.6.35 Revert commit 54672386ccf36ffa21d1de8e75624af83f9b0eeb "firewire: ohci: fix up configuration of TI chips". It caused massive slow-down and data corruption with a TSB82AA2 based StarTech EC1394B2 ExpressCard and FireWire 800 harddisks. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/657081 http://thread.gmane.org/gmane.linux.kernel.firewire.user/4013 The fact that some card EEPROMs do not program these enhancements may be related to TSB81BA3 phy chip errata, if not to bugs of TSB82AA2 itself. We could re-add these configuration steps, but only conditional on a whitelist of cards on which these enhancements bring a proven positive effect. Reported-and-tested-by: Eric Shattow Cc: Clemens Ladisch Cc: 2.6.35 Signed-off-by: Stefan Richter --- drivers/firewire/ohci.c | 19 +------------------ drivers/firewire/ohci.h | 8 -------- 2 files changed, 1 insertion(+), 26 deletions(-) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 1b05896648bc..9dcb17d51aee 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -2840,7 +2840,7 @@ static int __devinit pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) { struct fw_ohci *ohci; - u32 bus_options, max_receive, link_speed, version, link_enh; + u32 bus_options, max_receive, link_speed, version; u64 guid; int i, err, n_ir, n_it; size_t size; @@ -2894,23 +2894,6 @@ static int __devinit pci_probe(struct pci_dev *dev, if (param_quirks) ohci->quirks = param_quirks; - /* TI OHCI-Lynx and compatible: set recommended configuration bits. */ - if (dev->vendor == PCI_VENDOR_ID_TI) { - pci_read_config_dword(dev, PCI_CFG_TI_LinkEnh, &link_enh); - - /* adjust latency of ATx FIFO: use 1.7 KB threshold */ - link_enh &= ~TI_LinkEnh_atx_thresh_mask; - link_enh |= TI_LinkEnh_atx_thresh_1_7K; - - /* use priority arbitration for asynchronous responses */ - link_enh |= TI_LinkEnh_enab_unfair; - - /* required for aPhyEnhanceEnable to work */ - link_enh |= TI_LinkEnh_enab_accel; - - pci_write_config_dword(dev, PCI_CFG_TI_LinkEnh, link_enh); - } - ar_context_init(&ohci->ar_request_ctx, ohci, OHCI1394_AsReqRcvContextControlSet); diff --git a/drivers/firewire/ohci.h b/drivers/firewire/ohci.h index 0e6c5a466908..ef5e7336da68 100644 --- a/drivers/firewire/ohci.h +++ b/drivers/firewire/ohci.h @@ -155,12 +155,4 @@ #define OHCI1394_phy_tcode 0xe -/* TI extensions */ - -#define PCI_CFG_TI_LinkEnh 0xf4 -#define TI_LinkEnh_enab_accel 0x00000002 -#define TI_LinkEnh_enab_unfair 0x00000080 -#define TI_LinkEnh_atx_thresh_mask 0x00003000 -#define TI_LinkEnh_atx_thresh_1_7K 0x00001000 - #endif /* _FIREWIRE_OHCI_H */ -- cgit v1.2.2 From 6a2a11dbea5db417d200d38dda53c30a2e5603e0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 14 Oct 2010 17:14:57 -0400 Subject: drm/radeon/kms: avivo cursor workaround applies to evergreen as well Fixes cursor corruption in certain cases. Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cursor.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index 5731fc9b1ae3..3eef567b0421 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -203,6 +203,7 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc, struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct radeon_device *rdev = crtc->dev->dev_private; int xorigin = 0, yorigin = 0; + int w = radeon_crtc->cursor_width; if (x < 0) xorigin = -x + 1; @@ -213,22 +214,7 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc, if (yorigin >= CURSOR_HEIGHT) yorigin = CURSOR_HEIGHT - 1; - radeon_lock_cursor(crtc, true); - if (ASIC_IS_DCE4(rdev)) { - /* cursors are offset into the total surface */ - x += crtc->x; - y += crtc->y; - DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y); - - /* XXX: check if evergreen has the same issues as avivo chips */ - WREG32(EVERGREEN_CUR_POSITION + radeon_crtc->crtc_offset, - ((xorigin ? 0 : x) << 16) | - (yorigin ? 0 : y)); - WREG32(EVERGREEN_CUR_HOT_SPOT + radeon_crtc->crtc_offset, (xorigin << 16) | yorigin); - WREG32(EVERGREEN_CUR_SIZE + radeon_crtc->crtc_offset, - ((radeon_crtc->cursor_width - 1) << 16) | (radeon_crtc->cursor_height - 1)); - } else if (ASIC_IS_AVIVO(rdev)) { - int w = radeon_crtc->cursor_width; + if (ASIC_IS_AVIVO(rdev)) { int i = 0; struct drm_crtc *crtc_p; @@ -260,7 +246,17 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc, if (w <= 0) w = 1; } + } + radeon_lock_cursor(crtc, true); + if (ASIC_IS_DCE4(rdev)) { + WREG32(EVERGREEN_CUR_POSITION + radeon_crtc->crtc_offset, + ((xorigin ? 0 : x) << 16) | + (yorigin ? 0 : y)); + WREG32(EVERGREEN_CUR_HOT_SPOT + radeon_crtc->crtc_offset, (xorigin << 16) | yorigin); + WREG32(EVERGREEN_CUR_SIZE + radeon_crtc->crtc_offset, + ((w - 1) << 16) | (radeon_crtc->cursor_height - 1)); + } else if (ASIC_IS_AVIVO(rdev)) { WREG32(AVIVO_D1CUR_POSITION + radeon_crtc->crtc_offset, ((xorigin ? 0 : x) << 16) | (yorigin ? 0 : y)); -- cgit v1.2.2 From c5b4afec8e669bbe265daea24037fccfc42c4fe3 Mon Sep 17 00:00:00 2001 From: Jon Povey Date: Tue, 12 Oct 2010 13:47:05 +0900 Subject: i2c-davinci: Fix TX setup for more SoCs This patch is an improvement to 4bba0fd8d1c6d405df666e2573e1a1f917098be0 which got to mainline a little early. Sudhakar Rajashekhara explains that at least OMAP-L138 requires MDR mode settings before DXR for correct behaviour, so load MDR first with STT cleared and later load again with STT set. Tested on DM355 connected to Techwell TW2836 and Wolfson WM8985 Signed-off-by: Jon Povey Acked-by: Troy Kisky Tested-by: Sudhakar Rajashekhara Acked-by: Kevin Hilman Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-davinci.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index b8feac5f2ef4..5795c8398c7c 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -331,21 +331,16 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) INIT_COMPLETION(dev->cmd_complete); dev->cmd_err = 0; - /* Take I2C out of reset, configure it as master and set the - * start bit */ - flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST | DAVINCI_I2C_MDR_STT; + /* Take I2C out of reset and configure it as master */ + flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST; /* if the slave address is ten bit address, enable XA bit */ if (msg->flags & I2C_M_TEN) flag |= DAVINCI_I2C_MDR_XA; if (!(msg->flags & I2C_M_RD)) flag |= DAVINCI_I2C_MDR_TRX; - if (stop) - flag |= DAVINCI_I2C_MDR_STP; - if (msg->len == 0) { + if (msg->len == 0) flag |= DAVINCI_I2C_MDR_RM; - flag &= ~DAVINCI_I2C_MDR_STP; - } /* Enable receive or transmit interrupts */ w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG); @@ -357,18 +352,29 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) dev->terminate = 0; + /* + * Write mode register first as needed for correct behaviour + * on OMAP-L138, but don't set STT yet to avoid a race with XRDY + * occuring before we have loaded DXR + */ + davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); + /* * First byte should be set here, not after interrupt, * because transmit-data-ready interrupt can come before * NACK-interrupt during sending of previous message and * ICDXR may have wrong data + * It also saves us one interrupt, slightly faster */ if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) { davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++); dev->buf_len--; } - /* write the data into mode register; start transmitting */ + /* Set STT to begin transmit now DXR is loaded */ + flag |= DAVINCI_I2C_MDR_STT; + if (stop && msg->len != 0) + flag |= DAVINCI_I2C_MDR_STP; davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); r = wait_for_completion_interruptible_timeout(&dev->cmd_complete, -- cgit v1.2.2 From e39428d53d080ad2615b772d7f99d2a70c2aaab2 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 21 Jun 2010 09:27:05 +0200 Subject: i2c-imx: do not allow interruptions when waiting for I2C to complete The i2c_imx_trx_complete() function is using wait_event_interruptible_timeout() to wait for the I2C controller to signal that it has completed an I2C bus operation. If the process that causes the I2C operation receives a signal, the wait will be interrupted, returning an error. It is better to let the I2C operation finished before handling the signal (i.e. returning into userspace). It is safe to use wait_event_timeout() instead, because the timeout will allow the process to exit if the I2C bus hangs. It's also better to allow the I2C operation to finish, because unacknowledged I2C operations can cause the I2C bus to hang. Signed-off-by: Marc Kleine-Budde Reviewed-by: Wolfram Sang Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-imx.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index d1ff9408dc1f..4c2a62b75b5c 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -159,15 +159,9 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx) { - int result; - - result = wait_event_interruptible_timeout(i2c_imx->queue, - i2c_imx->i2csr & I2SR_IIF, HZ / 10); + wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10); - if (unlikely(result < 0)) { - dev_dbg(&i2c_imx->adapter.dev, "<%s> result < 0\n", __func__); - return result; - } else if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) { + if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) { dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__); return -ETIMEDOUT; } @@ -295,7 +289,7 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id) i2c_imx->i2csr = temp; temp &= ~I2SR_IIF; writeb(temp, i2c_imx->base + IMX_I2C_I2SR); - wake_up_interruptible(&i2c_imx->queue); + wake_up(&i2c_imx->queue); return IRQ_HANDLED; } -- cgit v1.2.2 From 0a74a1df3c13655b66b1908d76f2159654216326 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 18 Oct 2010 08:43:30 -0700 Subject: Input: evdev - fix Ooops in EVIOCGABS/EVIOCSABS This fixes a regression introduced by the dynamic allocation of absinfo for input devices. We need to bail out early for input devices which don't have absolute axis. [ 929.664303] Pid: 2989, comm: input Not tainted 2.6.36-rc8+ #14 MS-7260/MS-7260 [ 929.664318] EIP: 0060:[] EFLAGS: 00010246 CPU: 0 [ 929.664331] EIP is at evdev_ioctl+0x4f8/0x59f [ 929.664341] EAX: 00000040 EBX: 00000000 ECX: 00000006 EDX: f45a1efc [ 929.664355] ESI: 00000000 EDI: f45a1efc EBP: f45a1f24 ESP: f45a1eb8 [ 929.664369] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 929.664402] f470da74 f6a30e78 f462c240 00000018 bfe4a260 00000000 f45b06fc 00000000 [ 929.664429] <0> 000000c4 b769d000 c3544620 f470da74 f45b06fc f45b06fc f45a1f38 c107dd1f [ 929.664458] <0> f4710b74 000000c4 00000000 00000000 00000000 0000029d 00000a74 f4710b74 [ 929.664500] [] ? handle_mm_fault+0x2be/0x59a [ 929.664513] [] ? evdev_ioctl+0x0/0x59f [ 929.664524] [] ? do_vfs_ioctl+0x494/0x4d9 [ 929.664538] [] ? up_read+0x16/0x29 [ 929.664550] [] ? do_page_fault+0x2ff/0x32d [ 929.664564] [] ? do_sys_open+0xc5/0xcf [ 929.664575] [] ? sys_ioctl+0x41/0x61 [ 929.664587] [] ? sysenter_do_call+0x12/0x36 [ 929.684570] ---[ end trace 11b83e923bd8f2bb ]--- Signed-off-by: Daniel Mack Signed-off-by: Dmitry Torokhov --- drivers/input/evdev.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index c908c5f83645..afb64cf3748d 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -669,6 +669,9 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) { + if (!dev->absinfo) + return -EINVAL; + t = _IOC_NR(cmd) & ABS_MAX; abs = dev->absinfo[t]; @@ -684,6 +687,9 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) { + if (!dev->absinfo) + return -EINVAL; + t = _IOC_NR(cmd) & ABS_MAX; if (copy_from_user(&abs, p, min_t(size_t, -- cgit v1.2.2 From f9ce6eb5b6fa8cbcf0a0fb7c5f4203f94730fc52 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 18 Oct 2010 08:43:50 -0700 Subject: Input: evdev - fix EVIOCSABS regression 448cd16 ("Input: evdev - rearrange ioctl handling") broke EVIOCSABS by checking for the wrong direction bit. Signed-off-by: Daniel Mack Reported-by: Sven Neumann Tested-by: Sven Neumann Signed-off-by: Dmitry Torokhov --- drivers/input/evdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index afb64cf3748d..9ddafc30f432 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -683,7 +683,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, } } - if (_IOC_DIR(cmd) == _IOC_READ) { + if (_IOC_DIR(cmd) == _IOC_WRITE) { if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) { -- cgit v1.2.2 From 062ab57b2f8439ab506645cf6f29432e7c61497c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 28 Sep 2010 18:50:17 +0100 Subject: MIPS: Don't block signals if we'd failed to setup a sigframe Signed-off-by: Al Viro Cc: linux-kernel@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1696/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 2099d5a4c4b7..b3273aeaeedc 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -575,6 +575,9 @@ static int handle_signal(unsigned long sig, siginfo_t *info, ret = abi->setup_frame(vdso + abi->signal_return_offset, ka, regs, sig, oldset); + if (ret) + return ret; + spin_lock_irq(¤t->sighand->siglock); sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); if (!(ka->sa.sa_flags & SA_NODEFER)) -- cgit v1.2.2 From e5b377a8fb7b05f27647698ac739a0504cb2bf80 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 28 Sep 2010 18:50:27 +0100 Subject: MIPS: secure_computing, syscall audit: syscall number should in r2, not r0. As it is, audit_syscall_entry() and secure_computing() get the bogus value (0, in fact) Signed-off-by: Al Viro Cc: linux-kernel@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1697/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/ptrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index c51b95ff8644..c8777333e198 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -536,7 +536,7 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) { /* do the secure computing check first */ if (!entryexit) - secure_computing(regs->regs[0]); + secure_computing(regs->regs[2]); if (unlikely(current->audit_context) && entryexit) audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]), @@ -565,7 +565,7 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) out: if (unlikely(current->audit_context) && !entryexit) - audit_syscall_entry(audit_arch(), regs->regs[0], + audit_syscall_entry(audit_arch(), regs->regs[2], regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); } -- cgit v1.2.2 From 8f5a00eb422ed86e77bb8f67e08b9fe6d30f679a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 28 Sep 2010 18:50:37 +0100 Subject: MIPS: Sanitize restart logics Put the original syscall number into ->regs[0] when we leave syscall with error. Use it in restart logics. Everything else will have it 0 since we pass through SAVE_SOME on all the ways in. Note that in places like bad_stack and inllegal_syscall we leave it 0 - it's not restartable. Signed-off-by: Al Viro Cc: linux-kernel@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1698/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/branch.c | 1 - arch/mips/kernel/scall32-o32.S | 9 ++++----- arch/mips/kernel/scall64-64.S | 7 ++++--- arch/mips/kernel/scall64-n32.S | 6 ++++-- arch/mips/kernel/scall64-o32.S | 7 ++++--- arch/mips/kernel/signal.c | 37 ++++++++++++++++++------------------- arch/mips/kernel/unaligned.c | 2 -- 7 files changed, 34 insertions(+), 35 deletions(-) diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index 0176ed015c89..32103cc2a257 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -40,7 +40,6 @@ int __compute_return_epc(struct pt_regs *regs) return -EFAULT; } - regs->regs[0] = 0; switch (insn.i_format.opcode) { /* * jr and jalr are in r_format format. diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 17202bbe843f..73a061e85531 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -63,9 +63,9 @@ stack_done: sw t0, PT_R7(sp) # set error flag beqz t0, 1f + lw t1, PT_R2(sp) # syscall number negu v0 # error - sw v0, PT_R0(sp) # set flag for syscall - # restarting + sw t1, PT_R0(sp) # save it for syscall restarting 1: sw v0, PT_R2(sp) # result o32_syscall_exit: @@ -104,9 +104,9 @@ syscall_trace_entry: sw t0, PT_R7(sp) # set error flag beqz t0, 1f + lw t1, PT_R2(sp) # syscall number negu v0 # error - sw v0, PT_R0(sp) # set flag for syscall - # restarting + sw t1, PT_R0(sp) # save it for syscall restarting 1: sw v0, PT_R2(sp) # result j syscall_exit @@ -170,7 +170,6 @@ stackargs: */ bad_stack: negu v0 # error - sw v0, PT_R0(sp) sw v0, PT_R2(sp) li t0, 1 # set error flag sw t0, PT_R7(sp) diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index a8a6c596eb04..eb0bb73172c3 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -66,9 +66,9 @@ NESTED(handle_sys64, PT_SIZE, sp) sd t0, PT_R7(sp) # set error flag beqz t0, 1f + ld t1, PT_R2(sp) # syscall number dnegu v0 # error - sd v0, PT_R0(sp) # set flag for syscall - # restarting + sd t1, PT_R0(sp) # save it for syscall restarting 1: sd v0, PT_R2(sp) # result n64_syscall_exit: @@ -109,8 +109,9 @@ syscall_trace_entry: sd t0, PT_R7(sp) # set error flag beqz t0, 1f + ld t1, PT_R2(sp) # syscall number dnegu v0 # error - sd v0, PT_R0(sp) # set flag for syscall restarting + sd t1, PT_R0(sp) # save it for syscall restarting 1: sd v0, PT_R2(sp) # result j syscall_exit diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index a3d66137731a..4da3fafaa313 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -65,8 +65,9 @@ NESTED(handle_sysn32, PT_SIZE, sp) sd t0, PT_R7(sp) # set error flag beqz t0, 1f + ld t1, PT_R2(sp) # syscall number dnegu v0 # error - sd v0, PT_R0(sp) # set flag for syscall restarting + sd t1, PT_R0(sp) # save it for syscall restarting 1: sd v0, PT_R2(sp) # result local_irq_disable # make sure need_resched and @@ -106,8 +107,9 @@ n32_syscall_trace_entry: sd t0, PT_R7(sp) # set error flag beqz t0, 1f + ld t1, PT_R2(sp) # syscall number dnegu v0 # error - sd v0, PT_R0(sp) # set flag for syscall restarting + sd t1, PT_R0(sp) # save it for syscall restarting 1: sd v0, PT_R2(sp) # result j syscall_exit diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 813689ef2384..7ce0a3685627 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -93,8 +93,9 @@ NESTED(handle_sys, PT_SIZE, sp) sd t0, PT_R7(sp) # set error flag beqz t0, 1f + ld t1, PT_R2(sp) # syscall number dnegu v0 # error - sd v0, PT_R0(sp) # flag for syscall restarting + sd t1, PT_R0(sp) # save it for syscall restarting 1: sd v0, PT_R2(sp) # result o32_syscall_exit: @@ -142,8 +143,9 @@ trace_a_syscall: sd t0, PT_R7(sp) # set error flag beqz t0, 1f + ld t1, PT_R2(sp) # syscall number dnegu v0 # error - sd v0, PT_R0(sp) # set flag for syscall restarting + sd t1, PT_R0(sp) # save it for syscall restarting 1: sd v0, PT_R2(sp) # result j syscall_exit @@ -155,7 +157,6 @@ trace_a_syscall: */ bad_stack: dnegu v0 # error - sd v0, PT_R0(sp) sd v0, PT_R2(sp) li t0, 1 # set error flag sd t0, PT_R7(sp) diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index b3273aeaeedc..604f077bb5bf 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -550,23 +550,26 @@ static int handle_signal(unsigned long sig, siginfo_t *info, struct mips_abi *abi = current->thread.abi; void *vdso = current->mm->context.vdso; - switch(regs->regs[0]) { - case ERESTART_RESTARTBLOCK: - case ERESTARTNOHAND: - regs->regs[2] = EINTR; - break; - case ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { + if (regs->regs[0]) { + switch(regs->regs[2]) { + case ERESTART_RESTARTBLOCK: + case ERESTARTNOHAND: regs->regs[2] = EINTR; break; + case ERESTARTSYS: + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->regs[2] = EINTR; + break; + } + /* fallthrough */ + case ERESTARTNOINTR: + regs->regs[7] = regs->regs[26]; + regs->regs[2] = regs->regs[0]; + regs->cp0_epc -= 4; } - /* fallthrough */ - case ERESTARTNOINTR: /* Userland will reload $v0. */ - regs->regs[7] = regs->regs[26]; - regs->cp0_epc -= 8; - } - regs->regs[0] = 0; /* Don't deal with this again. */ + regs->regs[0] = 0; /* Don't deal with this again. */ + } if (sig_uses_siginfo(ka)) ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset, @@ -625,17 +628,13 @@ static void do_signal(struct pt_regs *regs) return; } - /* - * Who's code doesn't conform to the restartable syscall convention - * dies here!!! The li instruction, a single machine instruction, - * must directly be followed by the syscall instruction. - */ if (regs->regs[0]) { if (regs->regs[2] == ERESTARTNOHAND || regs->regs[2] == ERESTARTSYS || regs->regs[2] == ERESTARTNOINTR) { + regs->regs[2] = regs->regs[0]; regs->regs[7] = regs->regs[26]; - regs->cp0_epc -= 8; + regs->cp0_epc -= 4; } if (regs->regs[2] == ERESTART_RESTARTBLOCK) { regs->regs[2] = current->thread.abi->restart; diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index 69b039ca8d83..33d5a5ce4a29 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -109,8 +109,6 @@ static void emulate_load_store_insn(struct pt_regs *regs, unsigned long value; unsigned int res; - regs->regs[0] = 0; - /* * This load never faults. */ -- cgit v1.2.2 From 5b89c0044e048842245193b200b61e5f998abd9a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 28 Sep 2010 18:50:47 +0100 Subject: MIPS: Fix error values in case of bad_stack We want EFAULT, not - Signed-off-by: Al Viro Cc: linux-kernel@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1699/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall32-o32.S | 2 +- arch/mips/kernel/scall64-o32.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 73a061e85531..84b41797fae1 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -169,7 +169,7 @@ stackargs: * We probably should handle this case a bit more drastic. */ bad_stack: - negu v0 # error + li v0, EFAULT sw v0, PT_R2(sp) li t0, 1 # set error flag sw t0, PT_R7(sp) diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 7ce0a3685627..d2bc285413dc 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -156,7 +156,7 @@ trace_a_syscall: * The stackpointer for a call with more than 4 arguments is bad. */ bad_stack: - dnegu v0 # error + li v0, EFAULT sd v0, PT_R2(sp) li t0, 1 # set error flag sd t0, PT_R7(sp) -- cgit v1.2.2 From 4bfb8c5c87bd167640ef5789b22e058e339df804 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 28 Sep 2010 18:50:57 +0100 Subject: MIPS: do_sigaltstack() expects userland pointers o32 compat does the right thing, native and n32 compat do not... Signed-off-by: Al Viro Cc: linux-kernel@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1700/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal.c | 5 +---- arch/mips/kernel/signal_n32.c | 5 +++++ 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 604f077bb5bf..5922342bca39 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -390,7 +390,6 @@ asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs) { struct rt_sigframe __user *frame; sigset_t set; - stack_t st; int sig; frame = (struct rt_sigframe __user *) regs.regs[29]; @@ -411,11 +410,9 @@ asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs) else if (sig) force_sig(sig, current); - if (__copy_from_user(&st, &frame->rs_uc.uc_stack, sizeof(st))) - goto badframe; /* It is more difficult to avoid calling this function than to call it and ignore errors. */ - do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]); + do_sigaltstack(&frame->rs_uc.uc_stack, NULL, regs.regs[29]); /* * Don't let your children do this ... diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 2c5df818c65a..ee24d814d5b9 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -109,6 +109,7 @@ asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) { struct rt_sigframe_n32 __user *frame; + mm_segment_t old_fs; sigset_t set; stack_t st; s32 sp; @@ -143,7 +144,11 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) /* It is more difficult to avoid calling this function than to call it and ignore errors. */ + old_fs = get_fs(); + set_fs(KERNEL_DS); do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]); + set_fs(old_fs); + /* * Don't let your children do this ... -- cgit v1.2.2 From ec3352925b74df8043131b535794f39e2516f614 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Wed, 22 Sep 2010 14:03:57 +0800 Subject: MIPS: Remove all generated vmlinuz* files on "make clean" [Ralf: I changed the patch to explicitly list all files to be deleted out of paranoia.] Signed-off-by: Wu Zhangjin Patchwork: http://patchwork.linux-mips.org/patch/1590/ Signed-off-by: Ralf Baechle --- arch/mips/boot/compressed/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index ed9bb709c9a3..4df4c77d2722 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -105,4 +105,4 @@ OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec vmlinuz.srec: vmlinuz $(call cmd,objcopy) -clean-files := $(objtree)/vmlinuz.* +clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec} -- cgit v1.2.2 From 063c13a5adbd0ab3110cbefcf9ba5aeb103a84ac Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 18 Oct 2010 01:41:39 +0900 Subject: MIPS: 32-bit: Fix build failure in asm/fcntl.h CC security/integrity/ima/ima_fs.o In file included from linux/include/linux/fcntl.h:4:0, from linux/security/integrity/ima/ima_fs.c:18: linux/arch/mips/include/asm/fcntl.h:63:2: error: expected specifier-qualifier-list before 'off_t' make[3]: *** [security/integrity/ima/ima_fs.o] Error 1 make[2]: *** [security/integrity/ima/ima_fs.o] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by: Namhyung Kim Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1715/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/fcntl.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/include/asm/fcntl.h b/arch/mips/include/asm/fcntl.h index e482fe90fe88..75eddedcfc3e 100644 --- a/arch/mips/include/asm/fcntl.h +++ b/arch/mips/include/asm/fcntl.h @@ -56,6 +56,7 @@ */ #ifdef CONFIG_32BIT +#include struct flock { short l_type; -- cgit v1.2.2 From a35bee8a2748abe9a40865f477aba0a9b85965fd Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 18 Oct 2010 12:55:21 +0900 Subject: MIPS: Enable ISA_DMA_API config to fix build failure Add ISA_DMA_API config item and select it when GENERIC_ISA_DMA enabled. This fixes build failure on allmodconfig like following: CC sound/isa/es18xx.o sound/isa/es18xx.c: In function 'snd_es18xx_playback1_prepare': sound/isa/es18xx.c:501:9: error: implicit declaration of function 'snd_dma_program' sound/isa/es18xx.c: In function 'snd_es18xx_playback_pointer': sound/isa/es18xx.c:818:3: error: implicit declaration of function 'snd_dma_pointer' make[3]: *** [sound/isa/es18xx.o] Error 1 make[2]: *** [sound/isa/es18xx.o] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by: Namhyung Kim Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1717/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3ad59dde4852..2d3cf3890904 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -880,11 +880,15 @@ config NO_IOPORT config GENERIC_ISA_DMA bool select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n + select ISA_DMA_API config GENERIC_ISA_DMA_SUPPORT_BROKEN bool select GENERIC_ISA_DMA +config ISA_DMA_API + bool + config GENERIC_GPIO bool -- cgit v1.2.2 From 63f1474c69c061f923068a25f136dca0c49cd478 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 18 Oct 2010 10:16:26 +0200 Subject: mxc_nand: do not depend on disabling the irq in the interrupt handler This patch reverts the driver to enabling/disabling the NFC interrupt mask rather than enabling/disabling the system interrupt. This cleans up the driver so that it doesn't rely on interrupts being disabled within the interrupt handler. For i.MX21 we keep the current behaviour, that is calling enable_irq/disable_irq_nosync to enable/disable interrupts. This patch is based on earlier work by John Ogness. Signed-off-by: Sascha Hauer Acked-by: John Ogness Tested-by: John Ogness Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/mtd/nand/mxc_nand.c | 92 ++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 83 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index b2828e84d243..214b03afdd48 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -30,6 +30,8 @@ #include #include #include +#include +#include #include #include @@ -151,7 +153,7 @@ struct mxc_nand_host { int irq; int eccsize; - wait_queue_head_t irq_waitq; + struct completion op_completion; uint8_t *data_buf; unsigned int buf_start; @@ -164,6 +166,7 @@ struct mxc_nand_host { void (*send_read_id)(struct mxc_nand_host *); uint16_t (*get_dev_status)(struct mxc_nand_host *); int (*check_int)(struct mxc_nand_host *); + void (*irq_control)(struct mxc_nand_host *, int); }; /* OOB placement block for use with hardware ecc generation */ @@ -216,9 +219,12 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id) { struct mxc_nand_host *host = dev_id; - disable_irq_nosync(irq); + if (!host->check_int(host)) + return IRQ_NONE; - wake_up(&host->irq_waitq); + host->irq_control(host, 0); + + complete(&host->op_completion); return IRQ_HANDLED; } @@ -245,11 +251,54 @@ static int check_int_v1_v2(struct mxc_nand_host *host) if (!(tmp & NFC_V1_V2_CONFIG2_INT)) return 0; - writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2); + if (!cpu_is_mx21()) + writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2); return 1; } +/* + * It has been observed that the i.MX21 cannot read the CONFIG2:INT bit + * if interrupts are masked (CONFIG1:INT_MSK is set). To handle this, the + * driver can enable/disable the irq line rather than simply masking the + * interrupts. + */ +static void irq_control_mx21(struct mxc_nand_host *host, int activate) +{ + if (activate) + enable_irq(host->irq); + else + disable_irq_nosync(host->irq); +} + +static void irq_control_v1_v2(struct mxc_nand_host *host, int activate) +{ + uint16_t tmp; + + tmp = readw(NFC_V1_V2_CONFIG1); + + if (activate) + tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK; + else + tmp |= NFC_V1_V2_CONFIG1_INT_MSK; + + writew(tmp, NFC_V1_V2_CONFIG1); +} + +static void irq_control_v3(struct mxc_nand_host *host, int activate) +{ + uint32_t tmp; + + tmp = readl(NFC_V3_CONFIG2); + + if (activate) + tmp &= ~NFC_V3_CONFIG2_INT_MSK; + else + tmp |= NFC_V3_CONFIG2_INT_MSK; + + writel(tmp, NFC_V3_CONFIG2); +} + /* This function polls the NANDFC to wait for the basic operation to * complete by checking the INT bit of config2 register. */ @@ -259,10 +308,9 @@ static void wait_op_done(struct mxc_nand_host *host, int useirq) if (useirq) { if (!host->check_int(host)) { - - enable_irq(host->irq); - - wait_event(host->irq_waitq, host->check_int(host)); + INIT_COMPLETION(host->op_completion); + host->irq_control(host, 1); + wait_for_completion(&host->op_completion); } } else { while (max_retries-- > 0) { @@ -799,6 +847,7 @@ static void preset_v3(struct mtd_info *mtd) NFC_V3_CONFIG2_2CMD_PHASES | NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) | NFC_V3_CONFIG2_ST_CMD(0x70) | + NFC_V3_CONFIG2_INT_MSK | NFC_V3_CONFIG2_NUM_ADDR_PHASE0; if (chip->ecc.mode == NAND_ECC_HW) @@ -1024,6 +1073,10 @@ static int __init mxcnd_probe(struct platform_device *pdev) host->send_read_id = send_read_id_v1_v2; host->get_dev_status = get_dev_status_v1_v2; host->check_int = check_int_v1_v2; + if (cpu_is_mx21()) + host->irq_control = irq_control_mx21; + else + host->irq_control = irq_control_v1_v2; } if (nfc_is_v21()) { @@ -1062,6 +1115,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) host->send_read_id = send_read_id_v3; host->check_int = check_int_v3; host->get_dev_status = get_dev_status_v3; + host->irq_control = irq_control_v3; oob_smallpage = &nandv2_hw_eccoob_smallpage; oob_largepage = &nandv2_hw_eccoob_largepage; } else @@ -1093,14 +1147,34 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->options |= NAND_USE_FLASH_BBT; } - init_waitqueue_head(&host->irq_waitq); + init_completion(&host->op_completion); host->irq = platform_get_irq(pdev, 0); + /* + * mask the interrupt. For i.MX21 explicitely call + * irq_control_v1_v2 to use the mask bit. We can't call + * disable_irq_nosync() for an interrupt we do not own yet. + */ + if (cpu_is_mx21()) + irq_control_v1_v2(host, 0); + else + host->irq_control(host, 0); + err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host); if (err) goto eirq; + host->irq_control(host, 0); + + /* + * Now that the interrupt is disabled make sure the interrupt + * mask bit is cleared on i.MX21. Otherwise we can't read + * the interrupt status bit on this machine. + */ + if (cpu_is_mx21()) + irq_control_v1_v2(host, 1); + /* first scan to find the device and get the page size */ if (nand_scan_ident(mtd, 1, NULL)) { err = -ENXIO; -- cgit v1.2.2 From 9581d442b9058d3699b4be568b6e5eae38a41493 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 19 Oct 2010 16:46:55 +0200 Subject: KVM: Fix fs/gs reload oops with invalid ldt kvm reloads the host's fs and gs blindly, however the underlying segment descriptors may be invalid due to the user modifying the ldt after loading them. Fix by using the safe accessors (loadsegment() and load_gs_index()) instead of home grown unsafe versions. This is CVE-2010-3698. KVM-Stable-Tag. Signed-off-by: Avi Kivity Signed-off-by: Marcelo Tosatti --- arch/x86/include/asm/kvm_host.h | 24 ------------------------ arch/x86/kvm/svm.c | 15 ++++++++++----- arch/x86/kvm/vmx.c | 24 +++++++++--------------- 3 files changed, 19 insertions(+), 44 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 502e53f999cf..c52e2eb40a1e 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -652,20 +652,6 @@ static inline struct kvm_mmu_page *page_header(hpa_t shadow_page) return (struct kvm_mmu_page *)page_private(page); } -static inline u16 kvm_read_fs(void) -{ - u16 seg; - asm("mov %%fs, %0" : "=g"(seg)); - return seg; -} - -static inline u16 kvm_read_gs(void) -{ - u16 seg; - asm("mov %%gs, %0" : "=g"(seg)); - return seg; -} - static inline u16 kvm_read_ldt(void) { u16 ldt; @@ -673,16 +659,6 @@ static inline u16 kvm_read_ldt(void) return ldt; } -static inline void kvm_load_fs(u16 sel) -{ - asm("mov %0, %%fs" : : "rm"(sel)); -} - -static inline void kvm_load_gs(u16 sel) -{ - asm("mov %0, %%gs" : : "rm"(sel)); -} - static inline void kvm_load_ldt(u16 sel) { asm("lldt %0" : : "rm"(sel)); diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 81ed28cb36e6..8a3f9f64f86f 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -3163,8 +3163,8 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu) sync_lapic_to_cr8(vcpu); save_host_msrs(vcpu); - fs_selector = kvm_read_fs(); - gs_selector = kvm_read_gs(); + savesegment(fs, fs_selector); + savesegment(gs, gs_selector); ldt_selector = kvm_read_ldt(); svm->vmcb->save.cr2 = vcpu->arch.cr2; /* required for live migration with NPT */ @@ -3251,10 +3251,15 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu) vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp; vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip; - kvm_load_fs(fs_selector); - kvm_load_gs(gs_selector); - kvm_load_ldt(ldt_selector); load_host_msrs(vcpu); + loadsegment(fs, fs_selector); +#ifdef CONFIG_X86_64 + load_gs_index(gs_selector); + wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs); +#else + loadsegment(gs, gs_selector); +#endif + kvm_load_ldt(ldt_selector); reload_tss(vcpu); diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 49b25eee25ac..7bddfab12013 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -803,7 +803,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu) */ vmx->host_state.ldt_sel = kvm_read_ldt(); vmx->host_state.gs_ldt_reload_needed = vmx->host_state.ldt_sel; - vmx->host_state.fs_sel = kvm_read_fs(); + savesegment(fs, vmx->host_state.fs_sel); if (!(vmx->host_state.fs_sel & 7)) { vmcs_write16(HOST_FS_SELECTOR, vmx->host_state.fs_sel); vmx->host_state.fs_reload_needed = 0; @@ -811,7 +811,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu) vmcs_write16(HOST_FS_SELECTOR, 0); vmx->host_state.fs_reload_needed = 1; } - vmx->host_state.gs_sel = kvm_read_gs(); + savesegment(gs, vmx->host_state.gs_sel); if (!(vmx->host_state.gs_sel & 7)) vmcs_write16(HOST_GS_SELECTOR, vmx->host_state.gs_sel); else { @@ -841,27 +841,21 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu) static void __vmx_load_host_state(struct vcpu_vmx *vmx) { - unsigned long flags; - if (!vmx->host_state.loaded) return; ++vmx->vcpu.stat.host_state_reload; vmx->host_state.loaded = 0; if (vmx->host_state.fs_reload_needed) - kvm_load_fs(vmx->host_state.fs_sel); + loadsegment(fs, vmx->host_state.fs_sel); if (vmx->host_state.gs_ldt_reload_needed) { kvm_load_ldt(vmx->host_state.ldt_sel); - /* - * If we have to reload gs, we must take care to - * preserve our gs base. - */ - local_irq_save(flags); - kvm_load_gs(vmx->host_state.gs_sel); #ifdef CONFIG_X86_64 - wrmsrl(MSR_GS_BASE, vmcs_readl(HOST_GS_BASE)); + load_gs_index(vmx->host_state.gs_sel); + wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs); +#else + loadsegment(gs, vmx->host_state.gs_sel); #endif - local_irq_restore(flags); } reload_tss(); #ifdef CONFIG_X86_64 @@ -2589,8 +2583,8 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx) vmcs_write16(HOST_CS_SELECTOR, __KERNEL_CS); /* 22.2.4 */ vmcs_write16(HOST_DS_SELECTOR, __KERNEL_DS); /* 22.2.4 */ vmcs_write16(HOST_ES_SELECTOR, __KERNEL_DS); /* 22.2.4 */ - vmcs_write16(HOST_FS_SELECTOR, kvm_read_fs()); /* 22.2.4 */ - vmcs_write16(HOST_GS_SELECTOR, kvm_read_gs()); /* 22.2.4 */ + vmcs_write16(HOST_FS_SELECTOR, 0); /* 22.2.4 */ + vmcs_write16(HOST_GS_SELECTOR, 0); /* 22.2.4 */ vmcs_write16(HOST_SS_SELECTOR, __KERNEL_DS); /* 22.2.4 */ #ifdef CONFIG_X86_64 rdmsrl(MSR_FS_BASE, a); -- cgit v1.2.2 From ad4b2b627c8ac479e842bf586108c7a7fd63264b Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 18 Oct 2010 17:51:26 -0700 Subject: MIPS: Repair Kbuild make clean breakage. When running make clean, Kbuild doesn't process the .config file, so nothing generates a platform-y variable. We can get it to descend into the platform directories by setting $(obj-). The dec Platform file was unconditionally setting platform-, obliterating its previous contents and preventing some directories from being cleaned. This is change to an append operation '+=' to allow cavium-octeon to be cleaned. Signed-off-by: David Daney Cc: Sam Ravnborg Patchwork: https://patchwork.linux-mips.org/patch/1718/ Signed-off-by: Ralf Baechle --- arch/mips/Kbuild | 4 ++++ arch/mips/dec/Platform | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/mips/Kbuild b/arch/mips/Kbuild index e322d65f33a4..7dd65cfae837 100644 --- a/arch/mips/Kbuild +++ b/arch/mips/Kbuild @@ -7,6 +7,10 @@ subdir-ccflags-y := -Werror include arch/mips/Kbuild.platforms obj-y := $(platform-y) +# make clean traverses $(obj-) without having included .config, so +# everything ends up here +obj- := $(platform-) + # mips object files # The object files are linked as core-y files would be linked diff --git a/arch/mips/dec/Platform b/arch/mips/dec/Platform index 3adbcbd95db1..cf55a6f4e720 100644 --- a/arch/mips/dec/Platform +++ b/arch/mips/dec/Platform @@ -1,7 +1,7 @@ # # DECstation family # -platform-$(CONFIG_MACH_DECSTATION) = dec/ +platform-$(CONFIG_MACH_DECSTATION) += dec/ cflags-$(CONFIG_MACH_DECSTATION) += \ -I$(srctree)/arch/mips/include/asm/mach-dec libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/ -- cgit v1.2.2 From 08be7b2bc7393d5cf4beb00aecb5eb9e5cde5f85 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 18 Oct 2010 18:05:49 -0700 Subject: MIPS: jz4740: Fix Kbuild Platform file. The platform specific files should be included via the platform-y variable. Signed-off-by: David Daney Cc: Lars-Peter Clausen Patchwork: https://patchwork.linux-mips.org/patch/1719/ Signed-off-by: Ralf Baechle --- arch/mips/jz4740/Platform | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/jz4740/Platform b/arch/mips/jz4740/Platform index 6a97230e3d05..ba91be9c21ef 100644 --- a/arch/mips/jz4740/Platform +++ b/arch/mips/jz4740/Platform @@ -1,3 +1,3 @@ -core-$(CONFIG_MACH_JZ4740) += arch/mips/jz4740/ +platform-$(CONFIG_MACH_JZ4740) += jz4740/ cflags-$(CONFIG_MACH_JZ4740) += -I$(srctree)/arch/mips/include/asm/mach-jz4740 load-$(CONFIG_MACH_JZ4740) += 0xffffffff80010000 -- cgit v1.2.2 From 6cc0cc4a35337b48e09c82c5f3fb83534884fca8 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 15 Oct 2010 15:00:09 +0200 Subject: SERIAL: ioc3_serial: Return -ENOMEM on memory allocation failure In this code, 0 is returned on memory allocation failure, even though other failures return -ENOMEM or other similar values. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression ret; expression x,e1,e2,e3; @@ ret = 0 ... when != ret = e1 *x = \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != ret = e2 if (x == NULL) { ... when != ret = e3 return ret; } // Signed-off-by: Julia Lawall To: Pat Gefre Cc: kernel-janitors@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1704/ Signed-off-by: Ralf Baechle --- drivers/serial/ioc3_serial.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 93de907b1208..800c54602339 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -2044,6 +2044,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) if (!port) { printk(KERN_WARNING "IOC3 serial memory not available for port\n"); + ret = -ENOMEM; goto out4; } spin_lock_init(&port->ip_lock); -- cgit v1.2.2 From d39e072166493cbae3840ecfcf2b34bea0d2bebe Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 19 Oct 2010 18:32:41 +0100 Subject: MAINTAINERS: Change list for ioc_serial to linux-serial. IOC3 is also being used on SGI MIPS systems but this particular driver is only being used on IA64 systems so linux-mips made no sense as a list. Pat also thinks linux-serial@vger.kernel.org is the better list. Signed-off-by: Ralf Baechle --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index f46d8e66333f..1117403dba16 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3140,7 +3140,7 @@ F: drivers/net/ioc3-eth.c IOC3 SERIAL DRIVER M: Pat Gefre -L: linux-mips@linux-mips.org +L: linux-serial@vger.kernel.org S: Maintained F: drivers/serial/ioc3_serial.c -- cgit v1.2.2 From e2cc502c3f71d8de812893527dc435e61b7fe604 Mon Sep 17 00:00:00 2001 From: Michel Thebeau Date: Tue, 28 Sep 2010 14:15:37 -0400 Subject: MIPS: O32 compat/N32: Fix to use compat syscall wrappers for AIO syscalls. [Ralf: Michel's original patch only fixed N32; I replicated the same fix for O32.] Signed-off-by: Michel Thebeau Cc: paul.gortmaker@windriver.com Cc: bruce.ashfield@windriver.com Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall64-n32.S | 6 +++--- arch/mips/kernel/scall64-o32.S | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index a3d66137731a..79c27d1f5f9e 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -320,10 +320,10 @@ EXPORT(sysn32_call_table) PTR sys_cacheflush PTR sys_cachectl PTR sys_sysmips - PTR sys_io_setup /* 6200 */ + PTR compat_sys_io_setup /* 6200 */ PTR sys_io_destroy - PTR sys_io_getevents - PTR sys_io_submit + PTR compat_sys_io_getevents + PTR compat_sys_io_submit PTR sys_io_cancel PTR sys_exit_group /* 6205 */ PTR sys_lookup_dcookie diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 813689ef2384..c2aa30ad9702 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -444,10 +444,10 @@ sys_call_table: PTR compat_sys_futex PTR compat_sys_sched_setaffinity PTR compat_sys_sched_getaffinity /* 4240 */ - PTR sys_io_setup + PTR compat_sys_io_setup PTR sys_io_destroy - PTR sys_io_getevents - PTR sys_io_submit + PTR compat_sys_io_getevents + PTR compat_sys_io_submit PTR sys_io_cancel /* 4245 */ PTR sys_exit_group PTR sys32_lookup_dcookie -- cgit v1.2.2 From 531295e63be8c2b8b909d7400739e8b8df60d61f Mon Sep 17 00:00:00 2001 From: Amit Shah Date: Wed, 20 Oct 2010 13:45:43 +1030 Subject: virtio: console: Don't block entire guest if host doesn't read data If the host is slow in reading data or doesn't read data at all, blocking write calls not only blocked the program that called write() but the entire guest itself. To overcome this, let's not block till the host signals it has given back the virtio ring element we passed it. Instead, send the buffer to the host and return to userspace. This operation then becomes similar to how non-blocking writes work, so let's use the existing code for this path as well. This code change also ensures blocking write calls do get blocked if there's not enough room in the virtio ring as well as they don't return -EAGAIN to userspace. Signed-off-by: Amit Shah Acked-by: Hans de Goede CC: stable@kernel.org Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- drivers/char/virtio_console.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index c810481a5bc2..0f69c5ec0ecd 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -459,9 +459,12 @@ static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count, /* * Wait till the host acknowledges it pushed out the data we - * sent. This is done for ports in blocking mode or for data - * from the hvc_console; the tty operations are performed with - * spinlocks held so we can't sleep here. + * sent. This is done for data from the hvc_console; the tty + * operations are performed with spinlocks held so we can't + * sleep here. An alternative would be to copy the data to a + * buffer and relax the spinning requirement. The downside is + * we need to kmalloc a GFP_ATOMIC buffer each time the + * console driver writes something out. */ while (!virtqueue_get_buf(out_vq, &len)) cpu_relax(); @@ -626,6 +629,14 @@ static ssize_t port_fops_write(struct file *filp, const char __user *ubuf, goto free_buf; } + /* + * We now ask send_buf() to not spin for generic ports -- we + * can re-use the same code path that non-blocking file + * descriptors take for blocking file descriptors since the + * wait is already done and we're certain the write will go + * through to the host. + */ + nonblock = true; ret = send_buf(port, buf, count, nonblock); if (nonblock && ret > 0) -- cgit v1.2.2 From f6f94e2ab1b33f0082ac22d71f66385a60d8157f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 20 Oct 2010 13:30:22 -0700 Subject: Linux 2.6.36 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 7583116e5d9a..860c26af52c3 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 36 -EXTRAVERSION = -rc8 +EXTRAVERSION = NAME = Flesh-Eating Bats with Fangs # *DOCUMENTATION* -- cgit v1.2.2