From b95e9e8d94484c2823be67416f25e9756db149dc Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 17 Feb 2008 13:22:48 +0100 Subject: ACPI: fix section mismatch in processor_core.c:acpi_processor_hotplug_notify Fix following warning: WARNING: vmlinux.o(.text+0x55586c): Section mismatch in reference from the function acpi_processor_hotplug_notify() to the function .cpuinit.text:acpi_processor_start() acpi_processor_hotplug_notify() may safely reference __cpuinit stuff as it ids defined inside an ACPI_HOTPLUG_CPU block. So annotate it __ref to silence the warning. Signed-off-by: Sam Ravnborg Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 75ccf5d18bf4..d3cc07fa4480 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -881,8 +881,8 @@ int acpi_processor_device_add(acpi_handle handle, struct acpi_device **device) return 0; } -static void -acpi_processor_hotplug_notify(acpi_handle handle, u32 event, void *data) +static void __ref acpi_processor_hotplug_notify(acpi_handle handle, + u32 event, void *data) { struct acpi_processor *pr; struct acpi_device *device = NULL; -- cgit v1.2.2 From 7560e385651c60e5ffdf07cb94fa7d1658ab0b7a Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 17 Feb 2008 13:22:54 +0100 Subject: acer-wmi: fix section mismatch warnings Fix following warnings: WARNING: vmlinux.o(.text+0x672615): Section mismatch in reference from the function acer_platform_remove() to the function .exit.text:acer_backlight_exit() WARNING: vmlinux.o(.devinit.text+0x1e859): Section mismatch in reference from the function acer_platform_probe() to the function .init.text:acer_led_init() WARNING: vmlinux.o(.devinit.text+0x1e878): Section mismatch in reference from the function acer_platform_probe() to the function .init.text:acer_backlight_init() Remove __exit annotation from acer_backlight_exit(). We cannot reference a __exit annotated function from non __exit functions. acer_led_init() and acer_backlight_init() where both annotated __init but used from a __devinit function. This would result in an oops should gcc drop their inlining and the module are hot plugged. Fix by annotating acer_led_init() and acer_backlight_init() __devinit. Signed-off-by: Sam Ravnborg Cc: Carlos Corbacho Signed-off-by: Len Brown --- drivers/misc/acer-wmi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index d7aea93081f2..cdc733b77fe3 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -756,7 +756,7 @@ static struct led_classdev mail_led = { .brightness_set = mail_led_set, }; -static int __init acer_led_init(struct device *dev) +static int __devinit acer_led_init(struct device *dev) { return led_classdev_register(dev, &mail_led); } @@ -789,7 +789,7 @@ static struct backlight_ops acer_bl_ops = { .update_status = update_bl_status, }; -static int __init acer_backlight_init(struct device *dev) +static int __devinit acer_backlight_init(struct device *dev) { struct backlight_device *bd; @@ -808,7 +808,7 @@ static int __init acer_backlight_init(struct device *dev) return 0; } -static void __exit acer_backlight_exit(void) +static void acer_backlight_exit(void) { backlight_device_unregister(acer_backlight_device); } -- cgit v1.2.2 From b5678a34762edf2c8de1c60c125fea42a8c17e63 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 17 Feb 2008 13:23:03 +0100 Subject: ACPI: fix section mismatch in acpi_pci_root_add Fix following warning: WARNING: vmlinux.o(.text+0x550e85): Section mismatch in reference from the function acpi_pci_root_add() to the function .devinit.text:pci_acpi_scan_root() acpi_pci_root_add uses a __devinit annotated function and it looks like annotating it __devinit too is the correct fix. Signed-off-by: Sam Ravnborg Signed-off-by: Len Brown --- drivers/acpi/pci_root.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index f14ff1ffab29..c3fed31166b5 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -184,7 +184,7 @@ static void acpi_pci_bridge_scan(struct acpi_device *device) } } -static int acpi_pci_root_add(struct acpi_device *device) +static int __devinit acpi_pci_root_add(struct acpi_device *device) { int result = 0; struct acpi_pci_root *root = NULL; -- cgit v1.2.2 From d399d130c82a1e1751b7770944f487fbd8b6272a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 20 Feb 2008 00:59:03 +0200 Subject: sony-laptop.c: fix off-by-one This patch fixes an off-by-one spotted by the Coverity checker. Signed-off-by: Adrian Bunk Acked-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 899e3f75f288..02ff3d19b1cc 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -315,7 +315,7 @@ static void sony_laptop_report_input_event(u8 event) break; default: - if (event > ARRAY_SIZE(sony_laptop_input_index)) { + if (event >= ARRAY_SIZE(sony_laptop_input_index)) { dprintk("sony_laptop_report_input_event, event not known: %d\n", event); break; } -- cgit v1.2.2 From 3b5fee5952ff7eb6ff7a64247a01040b8b331b74 Mon Sep 17 00:00:00 2001 From: Holger Macht Date: Thu, 14 Feb 2008 13:40:34 +0100 Subject: ACPI: Do not pass NULL to acpi_get_handle() when looking for _EJD When trying to get the acpi_handle from an acpi_buffer, pass ACPI_ROOT_OBJECT instead of NULL to acpi_get_handle(). This fixes the detection of dock dependent bays. Signed-off-by: Holger Macht Tested-by: Thomas Renninger Signed-off-by: Len Brown --- drivers/acpi/scan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 3fac011f9cf9..d9b914303b9c 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -609,7 +609,8 @@ acpi_bus_get_ejd(acpi_handle handle, acpi_handle *ejd) status = acpi_evaluate_object(handle, "_EJD", NULL, &buffer); if (ACPI_SUCCESS(status)) { obj = buffer.pointer; - status = acpi_get_handle(NULL, obj->string.pointer, ejd); + status = acpi_get_handle(ACPI_ROOT_OBJECT, obj->string.pointer, + ejd); kfree(buffer.pointer); } return status; -- cgit v1.2.2 From 7ce9573e093891f5807e6e50f3bd2012f1e5d0fe Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 22 Feb 2008 11:25:04 -0800 Subject: ACPI: prevent randconfig build failure on empty ACPI_CUSTOM_DSDT_FILE Make ACPI_CUSTOM_DSDT boolean config symbol a hidden and derived value, based on the value of ACPI_CUSTOM_DSDT_FILE (string). Only the latter is presented to the user as a config option. This fixes problems with "make randconfig" setting ACPI_CUSTOM_DSDT but leaving ACPI_CUSTOM_DSDT_FILE empty/blank. Signed-off-by: Randy Dunlap Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index f688c214be0c..fbcaa069be86 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -283,24 +283,23 @@ config ACPI_TOSHIBA If you have a legacy free Toshiba laptop (such as the Libretto L1 series), say Y. -config ACPI_CUSTOM_DSDT - bool "Include Custom DSDT" +config ACPI_CUSTOM_DSDT_FILE + string "Custom DSDT Table file to include" + default "" depends on !STANDALONE - default n help This option supports a custom DSDT by linking it into the kernel. See Documentation/acpi/dsdt-override.txt - If unsure, say N. - -config ACPI_CUSTOM_DSDT_FILE - string "Custom DSDT Table file to include" - depends on ACPI_CUSTOM_DSDT - default "" - help Enter the full path name to the file which includes the AmlCode declaration. + If unsure, don't enter a file name. + +config ACPI_CUSTOM_DSDT + bool + default ACPI_CUSTOM_DSDT_FILE != "" + config ACPI_CUSTOM_DSDT_INITRD bool "Read Custom DSDT from initramfs" depends on BLK_DEV_INITRD -- cgit v1.2.2 From 583c377f1d58e705f75d8d5648ab41722be1ebca Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 22 Feb 2008 21:41:51 -0800 Subject: ACPI: acpi_pci_set_power_state() cleanups Minor cleanups to acpi_pci_set_power_state(): use the ACPI and PCI state symbols to make clear that a mapping is being done between PCI and ACPI states, instead of using magic numbers. For paranoia's sake, report any errors. Save five bytes (x86_64) too. Signed-off-by: David Brownell Signed-off-by: Len Brown --- drivers/pci/pci-acpi.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 4a23654184fc..72f7476930c8 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -272,21 +272,29 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) { acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev); acpi_handle tmp; - static int state_conv[] = { - [0] = 0, - [1] = 1, - [2] = 2, - [3] = 3, - [4] = 3 + static const u8 state_conv[] = { + [PCI_D0] = ACPI_STATE_D0, + [PCI_D1] = ACPI_STATE_D1, + [PCI_D2] = ACPI_STATE_D2, + [PCI_D3hot] = ACPI_STATE_D3, + [PCI_D3cold] = ACPI_STATE_D3 }; - int acpi_state = state_conv[(int __force) state]; if (!handle) return -ENODEV; /* If the ACPI device has _EJ0, ignore the device */ if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp))) return 0; - return acpi_bus_set_power(handle, acpi_state); + + switch (state) { + case PCI_D0: + case PCI_D1: + case PCI_D2: + case PCI_D3hot: + case PCI_D3cold: + return acpi_bus_set_power(handle, state_conv[state]); + } + return -EINVAL; } -- cgit v1.2.2 From d0ce46f550ebbd765881e8c48f43b66285d798b0 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 23 Feb 2008 01:53:09 -0500 Subject: ACPI Exception (): AE_NOT_FOUND, Processor Device is not present (update) update cfaf3747ff3d431fba33f75083b7f50f58ae22ff ACPI: ACPI Exception (): AE_NOT_FOUND, Processor Device is not present is_processor_present is only called in the processor hotplug case, and _STA method is mandatory at this time. We should ignore those processors that are disabled in the MADT and don't have _STA methods. Because they will never exist in this system. For the processors that don't physically exist but can be hot plugged later, we still need this debug info. http://bugzilla.kernel.org/show_bug.cgi?id=8570 Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index a3cc8a98255c..d9316ab66347 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -840,17 +840,19 @@ static int is_processor_present(acpi_handle handle) status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - /* - * if a processor object does not have an _STA object, - * OSPM assumes that the processor is present. - */ - if (status == AE_NOT_FOUND) - return 1; if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_PRESENT)) return 1; - ACPI_EXCEPTION((AE_INFO, status, "Processor Device is not present")); + /* + * _STA is mandatory for a processor that supports hot plug + */ + if (status == AE_NOT_FOUND) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Processor does not support hot plug\n")); + else + ACPI_EXCEPTION((AE_INFO, status, + "Processor Device is not present")); return 0; } -- cgit v1.2.2 From 538528de0cb256f65716ab2e9613d9e920f97fe2 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 13 Feb 2008 11:47:29 +0200 Subject: ARM: OMAP: Pass logical DMA channel number always to callback handlers This makes parameter passing to DMA handlers uniform between non-chained and chained transfers and makes debugging easier. Additional data like chain_id can be always passed to handlers via callback data if needed. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index a46676db8113..3e94683c9662 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1705,14 +1705,8 @@ static int omap2_dma_handle_ch(int ch) status = OMAP_DMA_CSR_REG(ch); } - if (likely(dma_chan[ch].callback != NULL)) { - if (dma_chan[ch].chain_id != -1) - dma_chan[ch].callback(dma_chan[ch].chain_id, status, - dma_chan[ch].data); - else - dma_chan[ch].callback(ch, status, dma_chan[ch].data); - - } + if (likely(dma_chan[ch].callback != NULL)) + dma_chan[ch].callback(ch, status, dma_chan[ch].data); OMAP_DMA_CSR_REG(ch) = status; -- cgit v1.2.2 From b8488fbe6d2f32ff4ad2f8f348a50e42389fc727 Mon Sep 17 00:00:00 2001 From: Hiroshi DOYU Date: Thu, 30 Aug 2007 12:46:39 +0300 Subject: ARM: OMAP: Fix sleep under spinlock for cpufreq [ 10.523437] BUG: sleeping function called from invalid context at kernel/mut6 [ 10.523437] in_atomic():0, irqs_disabled():128 [ 10.523437] [] (dump_stack+0x0/0x14) from [] (__might_sl) [ 10.523437] [] (__might_sleep+0x0/0xd4) from [] (mutex_l) [ 10.523437] r5 = C02F0DE8 r4 = C02F0DF0 [ 10.523437] [] (mutex_lock+0x0/0x44) from [] (clk_get+0x) [ 10.523437] r4 = 00000000 [ 10.523437] [] (clk_get+0x0/0x128) from [] (omap_getspee) [ 10.523437] r8 = 00000002 r7 = 00000000 r6 = C031DAF8 r5 = C0473980 [ 10.523437] r4 = 00000000 [ 10.523437] [] (omap_getspeed+0x0/0x5c) from [] (cpufreq) [ 10.523437] r5 = C0473980 r4 = 00000002 Signed-off-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/cpu-omap.c | 32 ++++++++++---------------------- 1 file changed, 10 insertions(+), 22 deletions(-) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index c0d63b0c61c9..d719c15daa55 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -33,43 +33,33 @@ #define MPU_CLK "virt_prcm_set" #endif +static struct clk *mpu_clk; + /* TODO: Add support for SDRAM timing changes */ int omap_verify_speed(struct cpufreq_policy *policy) { - struct clk * mpu_clk; - if (policy->cpu) return -EINVAL; cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - mpu_clk = clk_get(NULL, MPU_CLK); - if (IS_ERR(mpu_clk)) - return PTR_ERR(mpu_clk); + policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000; policy->max = clk_round_rate(mpu_clk, policy->max * 1000) / 1000; cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - clk_put(mpu_clk); - return 0; } unsigned int omap_getspeed(unsigned int cpu) { - struct clk * mpu_clk; unsigned long rate; if (cpu) return 0; - mpu_clk = clk_get(NULL, MPU_CLK); - if (IS_ERR(mpu_clk)) - return 0; rate = clk_get_rate(mpu_clk) / 1000; - clk_put(mpu_clk); - return rate; } @@ -77,14 +67,9 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - struct clk * mpu_clk; struct cpufreq_freqs freqs; int ret = 0; - mpu_clk = clk_get(NULL, MPU_CLK); - if (IS_ERR(mpu_clk)) - return PTR_ERR(mpu_clk); - freqs.old = omap_getspeed(0); freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; freqs.cpu = 0; @@ -92,15 +77,12 @@ static int omap_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); ret = clk_set_rate(mpu_clk, target_freq * 1000); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - clk_put(mpu_clk); return ret; } static int __init omap_cpu_init(struct cpufreq_policy *policy) { - struct clk * mpu_clk; - mpu_clk = clk_get(NULL, MPU_CLK); if (IS_ERR(mpu_clk)) return PTR_ERR(mpu_clk); @@ -111,17 +93,23 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000; policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000; policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - clk_put(mpu_clk); return 0; } +static int omap_cpu_exit(struct cpufreq_policy *policy) +{ + clk_put(mpu_clk); + return 0; +} + static struct cpufreq_driver omap_driver = { .flags = CPUFREQ_STICKY, .verify = omap_verify_speed, .target = omap_target, .get = omap_getspeed, .init = omap_cpu_init, + .exit = omap_cpu_exit, .name = "omap", }; -- cgit v1.2.2 From 8ba55c5c139f9be26b87d3aab9998f54d8d3057a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 26 Feb 2008 11:10:50 -0800 Subject: ARM: OMAP: fix false lockdep warnings Remove false lockdep warnings about lock recursion when declaring IRQs as being wake-capable, by marking putting GPIO irq_desc locks into their own class. (Thanks to Peter Zijlstra for helping track down such a small fix to this problem.) Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 56f4d1394d56..9030495509f8 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1277,6 +1277,11 @@ static struct clk *gpio_fclks[OMAP34XX_NR_GPIOS]; static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; #endif +/* This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + static int __init _omap_gpio_init(void) { int i; @@ -1450,6 +1455,7 @@ static int __init _omap_gpio_init(void) #endif for (j = bank->virtual_irq_start; j < bank->virtual_irq_start + gpio_count; j++) { + lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class); set_irq_chip_data(j, bank); if (bank_is_mpuio(bank)) set_irq_chip(j, &mpuio_irq_chip); -- cgit v1.2.2 From cfa9a63a9ad25fd3d3218a4e95f5a93090669f3c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 26 Feb 2008 11:02:30 -0800 Subject: ARM: OMAP: fix omap i2c init (regression) In mainline, the "old style" I2C registration was only removed for OMAP2, leading to init-time bugs (regressions) like: sysfs: duplicate filename 'i2c_omap.1' can not be created ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:424 sysfs_add_one+0x40/0xd4() Modules linked in: ... deletia ... [] (omap_init_i2c+0x0/0x50) from [] (omap_init_devices+0x10/0x24) r4:c001e000 [] (omap_init_devices+0x0/0x24) from [] (do_initcalls+0x78/0x200) ... deletia ... ---[ end trace ca143223eefdc828 ]--- kobject_add_internal failed for i2c_omap.1 with -EEXIST, don't try to register things with the same name in the same directory. The fix is obvious: remove the old init code, it's no longer needed. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/devices.c | 63 -------------------------------------------- 1 file changed, 63 deletions(-) diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index c5dab1d6417e..4a53f9ba6c43 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -88,68 +88,6 @@ EXPORT_SYMBOL(dsp_kfunc_device_register); static inline void omap_init_dsp(void) { } #endif /* CONFIG_OMAP_DSP */ -/*-------------------------------------------------------------------------*/ -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) - -#define OMAP1_I2C_BASE 0xfffb3800 -#define OMAP2_I2C_BASE1 0x48070000 -#define OMAP_I2C_SIZE 0x3f -#define OMAP1_I2C_INT INT_I2C -#define OMAP2_I2C_INT1 56 - -static struct resource i2c_resources1[] = { - { - .start = 0, - .end = 0, - .flags = IORESOURCE_MEM, - }, - { - .start = 0, - .flags = IORESOURCE_IRQ, - }, -}; - -/* DMA not used; works around erratum writing to non-empty i2c fifo */ - -static struct platform_device omap_i2c_device1 = { - .name = "i2c_omap", - .id = 1, - .num_resources = ARRAY_SIZE(i2c_resources1), - .resource = i2c_resources1, -}; - -/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */ -static void omap_init_i2c(void) -{ - if (cpu_is_omap24xx()) { - i2c_resources1[0].start = OMAP2_I2C_BASE1; - i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE; - i2c_resources1[1].start = OMAP2_I2C_INT1; - } else { - i2c_resources1[0].start = OMAP1_I2C_BASE; - i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE; - i2c_resources1[1].start = OMAP1_I2C_INT; - } - - /* FIXME define and use a boot tag, in case of boards that - * either don't wire up I2C, or chips that mux it differently... - * it can include clocking and address info, maybe more. - */ - if (cpu_is_omap24xx()) { - omap_cfg_reg(M19_24XX_I2C1_SCL); - omap_cfg_reg(L15_24XX_I2C1_SDA); - } else { - omap_cfg_reg(I2C_SCL); - omap_cfg_reg(I2C_SDA); - } - - (void) platform_device_register(&omap_i2c_device1); -} - -#else -static inline void omap_init_i2c(void) {} -#endif - /*-------------------------------------------------------------------------*/ #if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE) @@ -501,7 +439,6 @@ static int __init omap_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_dsp(); - omap_init_i2c(); omap_init_kp(); omap_init_mmc(); omap_init_uwire(); -- cgit v1.2.2 From 9be401a2aee69a63c88a0b91d73d3a8db091abda Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Mon, 3 Mar 2008 16:36:23 +0900 Subject: ARM: OMAP: Remove compiler warning when i2c is not set Remove compiler warning when i2c is not set Signed-off-by: Kyungmin Park Acked-by: Jarkko Nikula --- include/asm-arm/arch-omap/common.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h index 442aecbb8f44..224e009e5296 100644 --- a/include/asm-arm/arch-omap/common.h +++ b/include/asm-arm/arch-omap/common.h @@ -27,9 +27,7 @@ #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H #define __ARCH_ARM_MACH_OMAP_COMMON_H -#ifdef CONFIG_I2C_OMAP #include -#endif struct sys_timer; @@ -41,7 +39,12 @@ extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len); #else -#define omap_register_i2c_bus(a, b, c, d) 0 +static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + return 0; +} #endif #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ -- cgit v1.2.2 From 0cc0a441163b92fbda5fe1886cb6e9876cf08f40 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 28 Feb 2008 14:44:08 -0800 Subject: ARM: OMAP1: omap h3 regression and build fix Get rid of build warnings and errors in mainline for H3 boards; not all the H3 updates were correct, it seems like the OMAP1 boards are not getting proper build testing. Also, commit e27a93a944a5ba6a0112750c8243abba86d56e94 introduced a regression related to the tps65013 chip. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h3.c | 22 ++++++++++++++++++++++ include/asm-arm/arch-omap/board-h3.h | 2 +- 2 files changed, 23 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 6fc516855a8c..c3ef1ee5f77b 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -51,6 +52,8 @@ #include #include +#define H3_TS_GPIO 48 + static int h3_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -373,6 +376,17 @@ static struct platform_device h3_lcd_device = { .id = -1, }; +static struct spi_board_info h3_spi_board_info[] __initdata = { + [0] = { + .modalias = "tsc2101", + .bus_num = 2, + .chip_select = 0, + .irq = OMAP_GPIO_IRQ(H3_TS_GPIO), + .max_speed_hz = 16000000, + /* .platform_data = &tsc_platform_data, */ + }, +}; + static struct omap_mcbsp_reg_cfg mcbsp_regs = { .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), .spcr1 = RINTM(3) | RRST, @@ -457,6 +471,14 @@ static struct omap_board_config_kernel h3_config[] __initdata = { { OMAP_TAG_LCD, &h3_lcd_config }, }; +static struct i2c_board_info __initdata h3_i2c_board_info[] = { + { + I2C_BOARD_INFO("tps65010", 0x48), + .type = "tps65013", + /* .irq = OMAP_GPIO_IRQ(??), */ + }, +}; + static struct omap_gpio_switch h3_gpio_switches[] __initdata = { { .name = "mmc_slot", diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h index 1c2b55c61ca0..0f6404435ea8 100644 --- a/include/asm-arm/arch-omap/board-h3.h +++ b/include/asm-arm/arch-omap/board-h3.h @@ -36,7 +36,7 @@ #define NR_IRQS (MAXIRQNUM + 1) -extern void __init h3_mmc_init(void); +extern void h3_mmc_init(void); extern void h3_mmc_slot_cover_handler(void *arg, int state); #endif /* __ASM_ARCH_OMAP_H3_H */ -- cgit v1.2.2 From 09be7553959c9947f7cbccbe1c3094bb2e3ffd28 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 3 Mar 2008 01:31:32 -0800 Subject: ARM: OMAP1: Fix compile for boards depending on old gpio expander The long term fix is to switch boards to use drivers/gpio/pcf857x.c. Signed-off-by: Tony Lindgren --- include/asm-arm/arch-omap/gpioexpander.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/include/asm-arm/arch-omap/gpioexpander.h b/include/asm-arm/arch-omap/gpioexpander.h index 7a43b0a912e4..4eed1f80e2fb 100644 --- a/include/asm-arm/arch-omap/gpioexpander.h +++ b/include/asm-arm/arch-omap/gpioexpander.h @@ -18,7 +18,18 @@ /* Function Prototypes for GPIO Expander functions */ +#ifdef CONFIG_GPIOEXPANDER_OMAP int read_gpio_expa(u8 *, int); int write_gpio_expa(u8 , int); +#else +static inline int read_gpio_expa(u8 *val, int addr) +{ + return 0; +} +static inline int write_gpio_expa(u8 val, int addr) +{ + return 0; +} +#endif #endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ -- cgit v1.2.2 From 9221bb1c3a0d5e14df2cca43e22f983676795652 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 28 Feb 2008 14:40:53 -0800 Subject: ARM: OMAP1: omap h2 regression fix H2 and H3 were broken on by e27a93a944a5ba6a0112750c8243abba86d56e94, which removed declarations for their tps6501x chips. This resolves that issue for the H2. (Note that this patch *also* broke the isp1301 support on H2; it presumed a not-yet-merged new-style I2c driver.) Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h2.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 070345ee39a5..507987720015 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -350,6 +350,10 @@ static void __init h2_init_smc91x(void) static struct i2c_board_info __initdata h2_i2c_board_info[] = { { + I2C_BOARD_INFO("tps65010", 0x48), + .type = "tps65010", + .irq = OMAP_GPIO_IRQ(58), + }, { I2C_BOARD_INFO("isp1301_omap", 0x2d), .type = "isp1301_omap", .irq = OMAP_GPIO_IRQ(2), -- cgit v1.2.2 From 02bad5f9bc9f1f42d4bb87bb8bf741d4cefe87d6 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 24 Feb 2008 19:08:26 -0800 Subject: ARM: OMAP1: omap1/pm.c build fix Build fix: arch/arm/mach-omap1/pm.c: In function 'omap_pm_init': arch/arm/mach-omap1/pm.c:720: warning: passing argument 2 of 'sysfs_create_file' from incompatible pointer type Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 8eb5dcdaead2..e6c64e10b7ec 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -717,7 +717,7 @@ static int __init omap_pm_init(void) #endif #ifdef CONFIG_OMAP_32K_TIMER - error = sysfs_create_file(power_kobj, &sleep_while_idle_attr); + error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr); if (error) printk(KERN_ERR "sysfs_create_file failed: %d\n", error); #endif -- cgit v1.2.2 From a6472533e4553985af775982744b0ba088b5ff8c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 3 Mar 2008 04:33:30 -0800 Subject: ARM: OMAP: gpio lockdep updates Fix some spinlock issues reported by lockdep: since the gpio bank locks can be aquired in both irq and non-irq contexts, they need to be consistent about always using the irq-safe variants. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 59 ++++++++++++++++++++++++++++------------------- 1 file changed, 35 insertions(+), 24 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 9030495509f8..66a1455595f4 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -333,13 +333,14 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) void omap_set_gpio_direction(int gpio, int is_input) { struct gpio_bank *bank; + unsigned long flags; if (check_gpio(gpio) < 0) return; bank = get_gpio_bank(gpio); - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); _set_gpio_direction(bank, get_gpio_index(gpio), is_input); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); } static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) @@ -406,13 +407,14 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) void omap_set_gpio_dataout(int gpio, int enable) { struct gpio_bank *bank; + unsigned long flags; if (check_gpio(gpio) < 0) return; bank = get_gpio_bank(gpio); - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); _set_gpio_dataout(bank, get_gpio_index(gpio), enable); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); } int omap_get_gpio_datain(int gpio) @@ -624,6 +626,7 @@ static int gpio_irq_type(unsigned irq, unsigned type) struct gpio_bank *bank; unsigned gpio; int retval; + unsigned long flags; if (!cpu_class_is_omap2() && irq > IH_MPUIO_BASE) gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); @@ -642,13 +645,13 @@ static int gpio_irq_type(unsigned irq, unsigned type) return -EINVAL; bank = get_irq_chip_data(irq); - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); if (retval == 0) { irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; irq_desc[irq].status |= type; } - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return retval; } @@ -830,11 +833,13 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena */ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) { + unsigned long flags; + switch (bank->method) { #ifdef CONFIG_ARCH_OMAP16XX case METHOD_MPUIO: case METHOD_GPIO_1610: - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); if (enable) { bank->suspend_wakeup |= (1 << gpio); enable_irq_wake(bank->irq); @@ -842,7 +847,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) disable_irq_wake(bank->irq); bank->suspend_wakeup &= ~(1 << gpio); } - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -853,7 +858,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) (bank - gpio_bank) * 32 + gpio); return -EINVAL; } - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); if (enable) { bank->suspend_wakeup |= (1 << gpio); enable_irq_wake(bank->irq); @@ -861,7 +866,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) disable_irq_wake(bank->irq); bank->suspend_wakeup &= ~(1 << gpio); } - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif default: @@ -897,16 +902,17 @@ static int gpio_wake_enable(unsigned int irq, unsigned int enable) int omap_request_gpio(int gpio) { struct gpio_bank *bank; + unsigned long flags; if (check_gpio(gpio) < 0) return -EINVAL; bank = get_gpio_bank(gpio); - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); if (unlikely(bank->reserved_map & (1 << get_gpio_index(gpio)))) { printk(KERN_ERR "omap-gpio: GPIO %d is already reserved!\n", gpio); dump_stack(); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return -1; } bank->reserved_map |= (1 << get_gpio_index(gpio)); @@ -925,7 +931,7 @@ int omap_request_gpio(int gpio) __raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg); } #endif - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return 0; } @@ -933,15 +939,16 @@ int omap_request_gpio(int gpio) void omap_free_gpio(int gpio) { struct gpio_bank *bank; + unsigned long flags; if (check_gpio(gpio) < 0) return; bank = get_gpio_bank(gpio); - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); if (unlikely(!(bank->reserved_map & (1 << get_gpio_index(gpio))))) { printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio); dump_stack(); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return; } #ifdef CONFIG_ARCH_OMAP16XX @@ -960,7 +967,7 @@ void omap_free_gpio(int gpio) #endif bank->reserved_map &= ~(1 << get_gpio_index(gpio)); _reset_gpio(bank, gpio); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); } /* @@ -1194,11 +1201,12 @@ static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t me { struct gpio_bank *bank = platform_get_drvdata(pdev); void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; + unsigned long flags; - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); bank->saved_wakeup = __raw_readl(mask_reg); __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return 0; } @@ -1207,10 +1215,11 @@ static int omap_mpuio_resume_early(struct platform_device *pdev) { struct gpio_bank *bank = platform_get_drvdata(pdev); void __iomem *mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT; + unsigned long flags; - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); __raw_writel(bank->saved_wakeup, mask_reg); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); return 0; } @@ -1495,6 +1504,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) void __iomem *wake_status; void __iomem *wake_clear; void __iomem *wake_set; + unsigned long flags; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP16XX @@ -1515,11 +1525,11 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) continue; } - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); bank->saved_wakeup = __raw_readl(wake_status); __raw_writel(0xffffffff, wake_clear); __raw_writel(bank->suspend_wakeup, wake_set); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); } return 0; @@ -1536,6 +1546,7 @@ static int omap_gpio_resume(struct sys_device *dev) struct gpio_bank *bank = &gpio_bank[i]; void __iomem *wake_clear; void __iomem *wake_set; + unsigned long flags; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP16XX @@ -1554,10 +1565,10 @@ static int omap_gpio_resume(struct sys_device *dev) continue; } - spin_lock(&bank->lock); + spin_lock_irqsave(&bank->lock, flags); __raw_writel(0xffffffff, wake_clear); __raw_writel(bank->saved_wakeup, wake_set); - spin_unlock(&bank->lock); + spin_unlock_irqrestore(&bank->lock, flags); } return 0; -- cgit v1.2.2 From 8b7c1664405a1262bb78e80011ec10aa6b79df81 Mon Sep 17 00:00:00 2001 From: frederic Rodo Date: Wed, 27 Feb 2008 12:58:37 +0100 Subject: dm9161: add configuration for MII/RMII Signed-off-by: Frederic Rodo Signed-off-by: Jeff Garzik --- drivers/net/phy/davicom.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c index 7ed632db00d7..d926168bc780 100644 --- a/drivers/net/phy/davicom.c +++ b/drivers/net/phy/davicom.c @@ -37,6 +37,7 @@ #define MII_DM9161_SCR 0x10 #define MII_DM9161_SCR_INIT 0x0610 +#define MII_DM9161_SCR_RMII 0x0100 /* DM9161 Interrupt Register */ #define MII_DM9161_INTR 0x15 @@ -103,7 +104,7 @@ static int dm9161_config_aneg(struct phy_device *phydev) static int dm9161_config_init(struct phy_device *phydev) { - int err; + int err, temp; /* Isolate the PHY */ err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE); @@ -111,9 +112,19 @@ static int dm9161_config_init(struct phy_device *phydev) if (err < 0) return err; - /* Do not bypass the scrambler/descrambler */ - err = phy_write(phydev, MII_DM9161_SCR, MII_DM9161_SCR_INIT); + switch (phydev->interface) { + case PHY_INTERFACE_MODE_MII: + temp = MII_DM9161_SCR_INIT; + break; + case PHY_INTERFACE_MODE_RMII: + temp = MII_DM9161_SCR_INIT | MII_DM9161_SCR_RMII; + break; + default: + return -EINVAL; + } + /* Do not bypass the scrambler/descrambler */ + err = phy_write(phydev, MII_DM9161_SCR, temp); if (err < 0) return err; -- cgit v1.2.2 From f25f0f8dcd99e954dc0acf2fcb556cbcd7394549 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 25 Feb 2008 18:45:46 +0100 Subject: de2104x: remove BUG_ON() when changing media type When the chip dies (probably because of a bug somewhere in the driver), de_stop_rxtx() fails and changing the media type crashes the whole machine. Replace BUG_ON() in de_set_media() with a warning. Signed-off-by: Ondrej Zary Signed-off-by: Jeff Garzik --- drivers/net/tulip/de2104x.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 77d9dd7ea34f..567c62757e9d 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -910,7 +910,8 @@ static void de_set_media (struct de_private *de) unsigned media = de->media_type; u32 macmode = dr32(MacMode); - BUG_ON(de_is_running(de)); + if (de_is_running(de)) + printk(KERN_WARNING "%s: chip is running while changing media!\n", de->dev->name); if (de->de21040) dw32(CSR11, FULL_DUPLEX_MAGIC); -- cgit v1.2.2 From 27c8bc2cc1a520a6c77b225bb7dc53f7dea32f6f Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Thu, 28 Feb 2008 21:11:48 +0100 Subject: mv643xx_eth: Define module alias for platform device The mv643xx_eth driver can be loaded as a platform device, as is done by various Orion (ARM) based devices. The driver needs to define a module alias for the platform driver so udev will load it automatically. Tested with Debian on a QNAP TS-209. Signed-off-by: Martin Michlmayr Signed-off-by: Jeff Garzik --- drivers/net/mv643xx_eth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index b528ce77c406..771139e283af 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2104,6 +2104,7 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR( "Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, Manish Lachwani" " and Dale Farnsworth"); MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX"); +MODULE_ALIAS("platform:mv643xx_eth"); /* * The second part is the low level driver of the gigE ethernet ports. -- cgit v1.2.2 From 36c86bd27185939b7bb22252e47e133a08dcead6 Mon Sep 17 00:00:00 2001 From: Komuro Date: Sat, 1 Mar 2008 10:52:03 +0900 Subject: axnet_cs: change debugging level for "Too much work at interrupt" message. This message is frequently displayed even if normal file-transfer. Signed-off-by: Komuro Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/axnet_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index e8a63e483a2b..ce95c5d168fe 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -1268,7 +1268,7 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) } } - if (interrupts && ei_debug) + if (interrupts && ei_debug > 3) { handled = 1; if (nr_serviced >= MAX_SERVICE) -- cgit v1.2.2 From af856bbfc498c3c8c79cb07be84e958962c711c3 Mon Sep 17 00:00:00 2001 From: Thomas Klein Date: Mon, 3 Mar 2008 13:52:06 +0100 Subject: ehea: Fix missing Kconfig dependency Fixed Kconfig: ehea driver requires sparse mem Signed-off-by: Thomas Klein Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a0f0e605d630..a64bb415f10c 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2519,7 +2519,7 @@ config CHELSIO_T3 config EHEA tristate "eHEA Ethernet support" - depends on IBMEBUS && INET + depends on IBMEBUS && INET && SPARSEMEM select INET_LRO ---help--- This driver supports the IBM pSeries eHEA ethernet adapter. -- cgit v1.2.2 From f902283bbe68639142a00dd23d80ee31e1b00759 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Mon, 3 Mar 2008 14:37:31 -0800 Subject: e100: Do suspend/shutdown like e1000 This fixes a "trying to free already free IRQ" message and simplifies the shutdown/suspend code by re-using already existing code when going to suspend. The code is now symmetric with e100_resume. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 29 +++-------------------------- 1 file changed, 3 insertions(+), 26 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 36ba6dc96acc..cdf3090a1885 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2782,16 +2782,13 @@ static void __devexit e100_remove(struct pci_dev *pdev) } } -#ifdef CONFIG_PM static int e100_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *netdev = pci_get_drvdata(pdev); struct nic *nic = netdev_priv(netdev); if (netif_running(netdev)) - napi_disable(&nic->napi); - del_timer_sync(&nic->watchdog); - netif_carrier_off(nic->netdev); + e100_down(nic); netif_device_detach(netdev); pci_save_state(pdev); @@ -2804,14 +2801,13 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state) pci_enable_wake(pdev, PCI_D3cold, 0); } - free_irq(pdev->irq, netdev); - pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); return 0; } +#ifdef CONFIG_PM static int e100_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -2832,26 +2828,7 @@ static int e100_resume(struct pci_dev *pdev) static void e100_shutdown(struct pci_dev *pdev) { - struct net_device *netdev = pci_get_drvdata(pdev); - struct nic *nic = netdev_priv(netdev); - - if (netif_running(netdev)) - napi_disable(&nic->napi); - del_timer_sync(&nic->watchdog); - netif_carrier_off(nic->netdev); - - if ((nic->flags & wol_magic) | e100_asf(nic)) { - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); - } else { - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - } - - free_irq(pdev->irq, netdev); - - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); + e100_suspend(pdev, PMSG_SUSPEND); } /* ------------------ PCI Error Recovery infrastructure -------------- */ -- cgit v1.2.2 From 5a059e9d49936fd2069d1777210b06b31ce50ee4 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Mon, 3 Mar 2008 14:37:42 -0800 Subject: ixgbe: fix typo in speed mesage Signed-off-by: Emil Tantilov Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 23d0a4afe0e1..c2095ce531c9 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2133,7 +2133,7 @@ static void ixgbe_watchdog(unsigned long data) (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? "10 Gbps" : (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? - "1 Gpbs" : "unknown speed")), + "1 Gbps" : "unknown speed")), ((FLOW_RX && FLOW_TX) ? "RX/TX" : (FLOW_RX ? "RX" : (FLOW_TX ? "TX" : "None")))); -- cgit v1.2.2 From d94e6fed6edb365debf44d884a7e626f06a0eb28 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Mon, 3 Mar 2008 14:37:47 -0800 Subject: Intel ethernet adapter: Update MAINTAINERS Another team member unfortunately left: update MAINTAINERS. Condense the 3 lists down to a single list for all our drivers. Point to our new sourceforge index page which is slightly better navigateable than the sf.net project page. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- MAINTAINERS | 32 ++++---------------------------- 1 file changed, 4 insertions(+), 28 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 33d99dcac691..93e0de955b4b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2039,43 +2039,19 @@ M: kernel@wantstofly.org L: netdev@vger.kernel.org S: Maintained -INTEL PRO/100 ETHERNET SUPPORT +INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe) P: Auke Kok M: auke-jan.h.kok@intel.com P: Jesse Brandeburg M: jesse.brandeburg@intel.com P: Jeff Kirsher M: jeffrey.t.kirsher@intel.com +P: Bruce Allan +M: bruce.w.allan@intel.com P: John Ronciak M: john.ronciak@intel.com L: e1000-devel@lists.sourceforge.net -W: http://sourceforge.net/projects/e1000/ -S: Supported - -INTEL PRO/1000 GIGABIT ETHERNET SUPPORT -P: Auke Kok -M: auke-jan.h.kok@intel.com -P: Jesse Brandeburg -M: jesse.brandeburg@intel.com -P: Jeff Kirsher -M: jeffrey.t.kirsher@intel.com -P: John Ronciak -M: john.ronciak@intel.com -L: e1000-devel@lists.sourceforge.net -W: http://sourceforge.net/projects/e1000/ -S: Supported - -INTEL PRO/10GbE SUPPORT -P: Ayyappan Veeraiyan -M: ayyappan.veeraiyan@intel.com -P: Auke Kok -M: auke-jan.h.kok@intel.com -P: Jesse Brandeburg -M: jesse.brandeburg@intel.com -P: John Ronciak -M: john.ronciak@intel.com -L: e1000-devel@lists.sourceforge.net -W: http://sourceforge.net/projects/e1000/ +W: http://e1000.sourceforge.net/ S: Supported INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT -- cgit v1.2.2 From f37c768c39e3aeb8a508e1a45e461a506771445e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 3 Mar 2008 23:34:13 +0200 Subject: fix drivers/net/atarilance.c compilation This patch fixes the following build error: <-- snip --> ... CC [M] drivers/net/atarilance.o {standard input}: Assembler messages: {standard input}:406: Error: symbol `Lberr' is already defined {standard input}:460: Error: symbol `Lberr' is already defined make[3]: *** [drivers/net/atarilance.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/atarilance.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c index b74dbeef8050..13c293b286de 100644 --- a/drivers/net/atarilance.c +++ b/drivers/net/atarilance.c @@ -336,8 +336,6 @@ struct lance_addr { /***************************** Prototypes *****************************/ -static int addr_accessible( volatile void *regp, int wordflag, int - writeflag ); static unsigned long lance_probe1( struct net_device *dev, struct lance_addr *init_rec ); static int lance_open( struct net_device *dev ); @@ -406,7 +404,8 @@ struct net_device * __init atarilance_probe(int unit) /* Derived from hwreg_present() in atari/config.c: */ -static int __init addr_accessible( volatile void *regp, int wordflag, int writeflag ) +static noinline int __init addr_accessible(volatile void *regp, int wordflag, + int writeflag) { int ret; long flags; -- cgit v1.2.2 From f9e7d100ddea5cdcea7a02230566f36b0a648c2e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 27 Feb 2008 17:07:54 +0200 Subject: FIXED_PHY must depend on PHYLIB=y This patch fixes the following build error introduced by commit a79d8e93d300adb84cccc38ac396cfb118c238ad and reported by Olaf Hering: <-- snip --> ... LD .tmp_vmlinux1 arch/powerpc/sysdev/built-in.o: In function `of_add_fixed_phys': fsl_soc.c:(.init.text+0xd34): undefined reference to `fixed_phy_add' make: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index f4ca0591231d..3ac8529bb92c 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -67,6 +67,7 @@ config REALTEK_PHY config FIXED_PHY bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" + depends on PHYLIB=y ---help--- Adds the platform "fixed" MDIO Bus to cover the boards that use PHYs that are not connected to the real MDIO bus. -- cgit v1.2.2 From 0d66afe7805b169b6bf3c7a88cf8163298b8ef05 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 4 Mar 2008 15:19:22 -0800 Subject: make s2io.c:init_tti() static Make the needlessly global init_tti() static. Signed-off-by: Adrian Bunk Acked-by: "Ramkrishna Vepa" Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 6179a0a2032c..c72787adeba3 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1088,7 +1088,7 @@ static int s2io_print_pci_mode(struct s2io_nic *nic) * '-1' on failure */ -int init_tti(struct s2io_nic *nic, int link) +static int init_tti(struct s2io_nic *nic, int link) { struct XENA_dev_config __iomem *bar0 = nic->bar0; register u64 val64 = 0; -- cgit v1.2.2 From 140ee9603c753ce11fc3088c1988a77e92183f9b Mon Sep 17 00:00:00 2001 From: Gui Jianfeng Date: Wed, 5 Mar 2008 13:43:32 -0800 Subject: SCTP: Fix chunk parameter processing bug If an address family is not listed in "Supported Address Types" parameter(INIT Chunk), but the packet is sent by that family, this address family should be considered as supported by peer. Otherwise, an error condition will occur. For instance, if kernel receives an IPV6 SCTP INIT chunk with "Support Address Types" parameter which indicates just supporting IPV4 Address family. Kernel will reply an IPV6 SCTP INIT ACK packet, but the source ipv6 address in ipv6 header will be vacant. This is not correct. refer to RFC4460 as following: IMPLEMENTATION NOTE: If an SCTP endpoint lists in the 'Supported Address Types' parameter either IPv4 or IPv6, but uses the other family for sending the packet containing the INIT chunk, or if it also lists addresses of the other family in the INIT chunk, then the address family that is not listed in the 'Supported Address Types' parameter SHOULD also be considered as supported by the receiver of the INIT chunk. The receiver of the INIT chunk SHOULD NOT respond with any kind of error indication. Here is a fix to comply to RFC. Signed-off-by: Gui Jianfeng Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/sm_make_chunk.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index e45be4e3f80d..578630e8e00d 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -2375,6 +2375,14 @@ static int sctp_process_param(struct sctp_association *asoc, asoc->peer.ipv4_address = 0; asoc->peer.ipv6_address = 0; + /* Assume that peer supports the address family + * by which it sends a packet. + */ + if (peer_addr->sa.sa_family == AF_INET6) + asoc->peer.ipv6_address = 1; + else if (peer_addr->sa.sa_family == AF_INET) + asoc->peer.ipv4_address = 1; + /* Cycle through address types; avoid divide by 0. */ sat = ntohs(param.p->length) - sizeof(sctp_paramhdr_t); if (sat) -- cgit v1.2.2 From 219b99a9edab4fdc478c819acb38f4a592dffd7d Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 5 Mar 2008 13:44:46 -0800 Subject: [SCTP]: Bring MAX_BURST socket option into ietf API extension compliance Brings max_burst socket option set/get into line with the latest ietf socket extensions api draft, while maintaining backwards compatibility. Signed-off-by: Neil Horman Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/socket.c | 73 +++++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 60 insertions(+), 13 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 939892691a26..d994d822900d 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -2933,17 +2933,39 @@ static int sctp_setsockopt_maxburst(struct sock *sk, char __user *optval, int optlen) { + struct sctp_assoc_value params; + struct sctp_sock *sp; + struct sctp_association *asoc; int val; + int assoc_id = 0; - if (optlen != sizeof(int)) + if (optlen < sizeof(int)) return -EINVAL; - if (get_user(val, (int __user *)optval)) - return -EFAULT; - if (val < 0) + if (optlen == sizeof(int)) { + printk(KERN_WARNING + "SCTP: Use of int in max_burst socket option deprecated\n"); + printk(KERN_WARNING + "SCTP: Use struct sctp_assoc_value instead\n"); + if (copy_from_user(&val, optval, optlen)) + return -EFAULT; + } else if (optlen == sizeof(struct sctp_assoc_value)) { + if (copy_from_user(¶ms, optval, optlen)) + return -EFAULT; + val = params.assoc_value; + assoc_id = params.assoc_id; + } else return -EINVAL; - sctp_sk(sk)->max_burst = val; + sp = sctp_sk(sk); + + if (assoc_id != 0) { + asoc = sctp_id2assoc(sk, assoc_id); + if (!asoc) + return -EINVAL; + asoc->max_burst = val; + } else + sp->max_burst = val; return 0; } @@ -5005,20 +5027,45 @@ static int sctp_getsockopt_maxburst(struct sock *sk, int len, char __user *optval, int __user *optlen) { - int val; + struct sctp_assoc_value params; + struct sctp_sock *sp; + struct sctp_association *asoc; if (len < sizeof(int)) return -EINVAL; - len = sizeof(int); + if (len == sizeof(int)) { + printk(KERN_WARNING + "SCTP: Use of int in max_burst socket option deprecated\n"); + printk(KERN_WARNING + "SCTP: Use struct sctp_assoc_value instead\n"); + params.assoc_id = 0; + } else if (len == sizeof (struct sctp_assoc_value)) { + if (copy_from_user(¶ms, optval, len)) + return -EFAULT; + } else + return -EINVAL; - val = sctp_sk(sk)->max_burst; - if (put_user(len, optlen)) - return -EFAULT; - if (copy_to_user(optval, &val, len)) - return -EFAULT; + sp = sctp_sk(sk); + + if (params.assoc_id != 0) { + asoc = sctp_id2assoc(sk, params.assoc_id); + if (!asoc) + return -EINVAL; + params.assoc_value = asoc->max_burst; + } else + params.assoc_value = sp->max_burst; + + if (len == sizeof(int)) { + if (copy_to_user(optval, ¶ms.assoc_value, len)) + return -EFAULT; + } else { + if (copy_to_user(optval, ¶ms, len)) + return -EFAULT; + } + + return 0; - return -ENOTSUPP; } static int sctp_getsockopt_hmac_ident(struct sock *sk, int len, -- cgit v1.2.2 From dfec72285ef50f1a5ff342ed122652ccd3d0fb96 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 5 Mar 2008 18:36:28 -0800 Subject: net: replace __inline with inline Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/wan/sbni.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index 15d5c58e57bc..e59255a155a9 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -751,7 +751,7 @@ upload_data( struct net_device *dev, unsigned framelen, unsigned frameno, } -static __inline void +static inline void send_complete( struct net_local *nl ) { #ifdef CONFIG_SBNI_MULTILINE -- cgit v1.2.2 From 4eb329a5aa113048ec9dbe2bd81ca27adab04e2d Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 5 Mar 2008 18:37:16 -0800 Subject: irda: replace __inline with inline Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- include/net/irda/irttp.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/net/irda/irttp.h b/include/net/irda/irttp.h index 32c385dd9e06..0788c23d2828 100644 --- a/include/net/irda/irttp.h +++ b/include/net/irda/irttp.h @@ -169,17 +169,17 @@ int irttp_disconnect_request(struct tsap_cb *self, struct sk_buff *skb, void irttp_flow_request(struct tsap_cb *self, LOCAL_FLOW flow); struct tsap_cb *irttp_dup(struct tsap_cb *self, void *instance); -static __inline __u32 irttp_get_saddr(struct tsap_cb *self) +static inline __u32 irttp_get_saddr(struct tsap_cb *self) { return irlmp_get_saddr(self->lsap); } -static __inline __u32 irttp_get_daddr(struct tsap_cb *self) +static inline __u32 irttp_get_daddr(struct tsap_cb *self) { return irlmp_get_daddr(self->lsap); } -static __inline __u32 irttp_get_max_seg_size(struct tsap_cb *self) +static inline __u32 irttp_get_max_seg_size(struct tsap_cb *self) { return self->max_seg_size; } -- cgit v1.2.2 From d4f7751495747b0e857b2c302e37fe515cd03ef5 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 5 Mar 2008 18:37:39 -0800 Subject: isdn: replace __inline with inline Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_common.c | 4 ++-- drivers/isdn/i4l/isdn_v110.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c index 9cef6fcf587b..d4ad6992f776 100644 --- a/drivers/isdn/i4l/isdn_common.c +++ b/drivers/isdn/i4l/isdn_common.c @@ -981,13 +981,13 @@ isdn_readbchan_tty(int di, int channel, struct tty_struct *tty, int cisco_hack) } -static __inline int +static inline int isdn_minor2drv(int minor) { return (dev->drvmap[minor]); } -static __inline int +static inline int isdn_minor2chan(int minor) { return (dev->chanmap[minor]); diff --git a/drivers/isdn/i4l/isdn_v110.c b/drivers/isdn/i4l/isdn_v110.c index 5484d3c38a57..c5d02b6aafab 100644 --- a/drivers/isdn/i4l/isdn_v110.c +++ b/drivers/isdn/i4l/isdn_v110.c @@ -62,7 +62,7 @@ static unsigned char V110_OffMatrix_38400[] = * and to 67452301 when keylen = 2. This is necessary because ordering on * the isdn line is the other way. */ -static __inline unsigned char +static inline unsigned char FlipBits(unsigned char c, int keylen) { unsigned char b = c; -- cgit v1.2.2 From 5a346a10c0b1192e7eae52f0f3a332f1d3f11226 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 5 Mar 2008 18:38:07 -0800 Subject: atm: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- drivers/atm/firestream.c | 4 ++-- drivers/atm/fore200e.c | 4 ++-- drivers/atm/idt77252.c | 12 ++++++------ 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index c662d686154a..47c57a4294b7 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -331,8 +331,8 @@ module_param(fs_keystream, int, 0); #define FS_DEBUG_QSIZE 0x00001000 -#define func_enter() fs_dprintk (FS_DEBUG_FLOW, "fs: enter %s\n", __FUNCTION__) -#define func_exit() fs_dprintk (FS_DEBUG_FLOW, "fs: exit %s\n", __FUNCTION__) +#define func_enter() fs_dprintk(FS_DEBUG_FLOW, "fs: enter %s\n", __func__) +#define func_exit() fs_dprintk(FS_DEBUG_FLOW, "fs: exit %s\n", __func__) static struct fs_dev *fs_boards = NULL; diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index f97e050338f0..9427a61f62b0 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -95,8 +95,8 @@ #if 1 #define ASSERT(expr) if (!(expr)) { \ printk(FORE200E "assertion failed! %s[%d]: %s\n", \ - __FUNCTION__, __LINE__, #expr); \ - panic(FORE200E "%s", __FUNCTION__); \ + __func__, __LINE__, #expr); \ + panic(FORE200E "%s", __func__); \ } #else #define ASSERT(expr) do {} while (0) diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index eee54c0cde68..b967919fb7e2 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -555,7 +555,7 @@ idt77252_tx_dump(struct idt77252_dev *card) struct vc_map *vc; int i; - printk("%s\n", __FUNCTION__); + printk("%s\n", __func__); for (i = 0; i < card->tct_size; i++) { vc = card->vcs[i]; if (!vc) @@ -1035,7 +1035,7 @@ dequeue_rx(struct idt77252_dev *card, struct rsq_entry *rsqe) skb = sb_pool_skb(card, le32_to_cpu(rsqe->word_2)); if (skb == NULL) { printk("%s: NULL skb in %s, rsqe: %08x %08x %08x %08x\n", - card->name, __FUNCTION__, + card->name, __func__, le32_to_cpu(rsqe->word_1), le32_to_cpu(rsqe->word_2), le32_to_cpu(rsqe->word_3), le32_to_cpu(rsqe->word_4)); return; @@ -1873,7 +1873,7 @@ add_rx_skb(struct idt77252_dev *card, int queue, return; if (sb_pool_add(card, skb, queue)) { - printk("%s: SB POOL full\n", __FUNCTION__); + printk("%s: SB POOL full\n", __func__); goto outfree; } @@ -1883,7 +1883,7 @@ add_rx_skb(struct idt77252_dev *card, int queue, IDT77252_PRV_PADDR(skb) = paddr; if (push_rx_skb(card, skb, queue)) { - printk("%s: FB QUEUE full\n", __FUNCTION__); + printk("%s: FB QUEUE full\n", __func__); goto outunmap; } } @@ -3821,12 +3821,12 @@ static int __init idt77252_init(void) { struct sk_buff *skb; - printk("%s: at %p\n", __FUNCTION__, idt77252_init); + printk("%s: at %p\n", __func__, idt77252_init); if (sizeof(skb->cb) < sizeof(struct atm_skb_data) + sizeof(struct idt77252_skb_prv)) { printk(KERN_ERR "%s: skb->cb is too small (%lu < %lu)\n", - __FUNCTION__, (unsigned long) sizeof(skb->cb), + __func__, (unsigned long) sizeof(skb->cb), (unsigned long) sizeof(struct atm_skb_data) + sizeof(struct idt77252_skb_prv)); return -EIO; -- cgit v1.2.2 From cf3752e2d203bbbfc88d29e362e6938cef4339b3 Mon Sep 17 00:00:00 2001 From: James Chapman Date: Wed, 5 Mar 2008 18:39:08 -0800 Subject: [PPPOL2TP]: Make locking calls softirq-safe Fix locking issues in the pppol2tp driver which can cause a kernel crash on SMP boxes. There were two problems:- 1. The driver was violating read_lock() and write_lock() scheduling rules because it wasn't using softirq-safe locks in softirq contexts. So we now consistently use the _bh variants of the lock functions. 2. The driver was calling sk_dst_get() in pppol2tp_xmit() which was taking sk_dst_lock in softirq context. We now call __sk_dst_get(). Signed-off-by: James Chapman Signed-off-by: David S. Miller --- drivers/net/pppol2tp.c | 58 +++++++++++++++++++++++++------------------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 86e5dba079fe..9a90cede0ecc 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -302,14 +302,14 @@ pppol2tp_session_find(struct pppol2tp_tunnel *tunnel, u16 session_id) struct pppol2tp_session *session; struct hlist_node *walk; - read_lock(&tunnel->hlist_lock); + read_lock_bh(&tunnel->hlist_lock); hlist_for_each_entry(session, walk, session_list, hlist) { if (session->tunnel_addr.s_session == session_id) { - read_unlock(&tunnel->hlist_lock); + read_unlock_bh(&tunnel->hlist_lock); return session; } } - read_unlock(&tunnel->hlist_lock); + read_unlock_bh(&tunnel->hlist_lock); return NULL; } @@ -320,14 +320,14 @@ static struct pppol2tp_tunnel *pppol2tp_tunnel_find(u16 tunnel_id) { struct pppol2tp_tunnel *tunnel = NULL; - read_lock(&pppol2tp_tunnel_list_lock); + read_lock_bh(&pppol2tp_tunnel_list_lock); list_for_each_entry(tunnel, &pppol2tp_tunnel_list, list) { if (tunnel->stats.tunnel_id == tunnel_id) { - read_unlock(&pppol2tp_tunnel_list_lock); + read_unlock_bh(&pppol2tp_tunnel_list_lock); return tunnel; } } - read_unlock(&pppol2tp_tunnel_list_lock); + read_unlock_bh(&pppol2tp_tunnel_list_lock); return NULL; } @@ -344,7 +344,7 @@ static void pppol2tp_recv_queue_skb(struct pppol2tp_session *session, struct sk_ struct sk_buff *skbp; u16 ns = PPPOL2TP_SKB_CB(skb)->ns; - spin_lock(&session->reorder_q.lock); + spin_lock_bh(&session->reorder_q.lock); skb_queue_walk(&session->reorder_q, skbp) { if (PPPOL2TP_SKB_CB(skbp)->ns > ns) { __skb_insert(skb, skbp->prev, skbp, &session->reorder_q); @@ -360,7 +360,7 @@ static void pppol2tp_recv_queue_skb(struct pppol2tp_session *session, struct sk_ __skb_queue_tail(&session->reorder_q, skb); out: - spin_unlock(&session->reorder_q.lock); + spin_unlock_bh(&session->reorder_q.lock); } /* Dequeue a single skb. @@ -442,7 +442,7 @@ static void pppol2tp_recv_dequeue(struct pppol2tp_session *session) * expect to send up next, dequeue it and any other * in-sequence packets behind it. */ - spin_lock(&session->reorder_q.lock); + spin_lock_bh(&session->reorder_q.lock); skb_queue_walk_safe(&session->reorder_q, skb, tmp) { if (time_after(jiffies, PPPOL2TP_SKB_CB(skb)->expires)) { session->stats.rx_seq_discards++; @@ -470,13 +470,13 @@ static void pppol2tp_recv_dequeue(struct pppol2tp_session *session) goto out; } } - spin_unlock(&session->reorder_q.lock); + spin_unlock_bh(&session->reorder_q.lock); pppol2tp_recv_dequeue_skb(session, skb); - spin_lock(&session->reorder_q.lock); + spin_lock_bh(&session->reorder_q.lock); } out: - spin_unlock(&session->reorder_q.lock); + spin_unlock_bh(&session->reorder_q.lock); } /* Internal receive frame. Do the real work of receiving an L2TP data frame @@ -1059,7 +1059,7 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) /* Get routing info from the tunnel socket */ dst_release(skb->dst); - skb->dst = sk_dst_get(sk_tun); + skb->dst = dst_clone(__sk_dst_get(sk_tun)); skb_orphan(skb); skb->sk = sk_tun; @@ -1107,7 +1107,7 @@ static void pppol2tp_tunnel_closeall(struct pppol2tp_tunnel *tunnel) PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO, "%s: closing all sessions...\n", tunnel->name); - write_lock(&tunnel->hlist_lock); + write_lock_bh(&tunnel->hlist_lock); for (hash = 0; hash < PPPOL2TP_HASH_SIZE; hash++) { again: hlist_for_each_safe(walk, tmp, &tunnel->session_hlist[hash]) { @@ -1129,7 +1129,7 @@ again: * disappear as we're jumping between locks. */ sock_hold(sk); - write_unlock(&tunnel->hlist_lock); + write_unlock_bh(&tunnel->hlist_lock); lock_sock(sk); if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { @@ -1154,11 +1154,11 @@ again: * list so we are guaranteed to make forward * progress. */ - write_lock(&tunnel->hlist_lock); + write_lock_bh(&tunnel->hlist_lock); goto again; } } - write_unlock(&tunnel->hlist_lock); + write_unlock_bh(&tunnel->hlist_lock); } /* Really kill the tunnel. @@ -1167,9 +1167,9 @@ again: static void pppol2tp_tunnel_free(struct pppol2tp_tunnel *tunnel) { /* Remove from socket list */ - write_lock(&pppol2tp_tunnel_list_lock); + write_lock_bh(&pppol2tp_tunnel_list_lock); list_del_init(&tunnel->list); - write_unlock(&pppol2tp_tunnel_list_lock); + write_unlock_bh(&pppol2tp_tunnel_list_lock); atomic_dec(&pppol2tp_tunnel_count); kfree(tunnel); @@ -1245,9 +1245,9 @@ static void pppol2tp_session_destruct(struct sock *sk) /* Delete the session socket from the * hash */ - write_lock(&tunnel->hlist_lock); + write_lock_bh(&tunnel->hlist_lock); hlist_del_init(&session->hlist); - write_unlock(&tunnel->hlist_lock); + write_unlock_bh(&tunnel->hlist_lock); atomic_dec(&pppol2tp_session_count); } @@ -1392,9 +1392,9 @@ static struct sock *pppol2tp_prepare_tunnel_socket(int fd, u16 tunnel_id, /* Add tunnel to our list */ INIT_LIST_HEAD(&tunnel->list); - write_lock(&pppol2tp_tunnel_list_lock); + write_lock_bh(&pppol2tp_tunnel_list_lock); list_add(&tunnel->list, &pppol2tp_tunnel_list); - write_unlock(&pppol2tp_tunnel_list_lock); + write_unlock_bh(&pppol2tp_tunnel_list_lock); atomic_inc(&pppol2tp_tunnel_count); /* Bump the reference count. The tunnel context is deleted @@ -1599,11 +1599,11 @@ static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr, sk->sk_user_data = session; /* Add session to the tunnel's hash list */ - write_lock(&tunnel->hlist_lock); + write_lock_bh(&tunnel->hlist_lock); hlist_add_head(&session->hlist, pppol2tp_session_id_hash(tunnel, session->tunnel_addr.s_session)); - write_unlock(&tunnel->hlist_lock); + write_unlock_bh(&tunnel->hlist_lock); atomic_inc(&pppol2tp_session_count); @@ -2205,7 +2205,7 @@ static struct pppol2tp_session *next_session(struct pppol2tp_tunnel *tunnel, str int next = 0; int i; - read_lock(&tunnel->hlist_lock); + read_lock_bh(&tunnel->hlist_lock); for (i = 0; i < PPPOL2TP_HASH_SIZE; i++) { hlist_for_each_entry(session, walk, &tunnel->session_hlist[i], hlist) { if (curr == NULL) { @@ -2223,7 +2223,7 @@ static struct pppol2tp_session *next_session(struct pppol2tp_tunnel *tunnel, str } } out: - read_unlock(&tunnel->hlist_lock); + read_unlock_bh(&tunnel->hlist_lock); if (!found) session = NULL; @@ -2234,13 +2234,13 @@ static struct pppol2tp_tunnel *next_tunnel(struct pppol2tp_tunnel *curr) { struct pppol2tp_tunnel *tunnel = NULL; - read_lock(&pppol2tp_tunnel_list_lock); + read_lock_bh(&pppol2tp_tunnel_list_lock); if (list_is_last(&curr->list, &pppol2tp_tunnel_list)) { goto out; } tunnel = list_entry(curr->list.next, struct pppol2tp_tunnel, list); out: - read_unlock(&pppol2tp_tunnel_list_lock); + read_unlock_bh(&pppol2tp_tunnel_list_lock); return tunnel; } -- cgit v1.2.2 From e653181dd6b3ad38ce14904351b03a5388f4b0f7 Mon Sep 17 00:00:00 2001 From: James Chapman Date: Wed, 5 Mar 2008 18:40:01 -0800 Subject: [PPPOL2TP]: Fix SMP issues in skb reorder queue handling When walking a session's packet reorder queue, use skb_queue_walk_safe() since the list could be modified inside the loop. Rearrange the unlinking skbs from the reorder queue such that it is done while the queue lock is held in pppol2tp_recv_dequeue() when walking the skb list. A version of this patch was suggested by Jarek Poplawski. Signed-off-by: James Chapman Signed-off-by: David S. Miller --- drivers/net/pppol2tp.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 9a90cede0ecc..3d10ca050b79 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -342,10 +342,11 @@ static struct pppol2tp_tunnel *pppol2tp_tunnel_find(u16 tunnel_id) static void pppol2tp_recv_queue_skb(struct pppol2tp_session *session, struct sk_buff *skb) { struct sk_buff *skbp; + struct sk_buff *tmp; u16 ns = PPPOL2TP_SKB_CB(skb)->ns; spin_lock_bh(&session->reorder_q.lock); - skb_queue_walk(&session->reorder_q, skbp) { + skb_queue_walk_safe(&session->reorder_q, skbp, tmp) { if (PPPOL2TP_SKB_CB(skbp)->ns > ns) { __skb_insert(skb, skbp->prev, skbp, &session->reorder_q); PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG, @@ -371,10 +372,9 @@ static void pppol2tp_recv_dequeue_skb(struct pppol2tp_session *session, struct s int length = PPPOL2TP_SKB_CB(skb)->length; struct sock *session_sock = NULL; - /* We're about to requeue the skb, so unlink it and return resources + /* We're about to requeue the skb, so return resources * to its current owner (a socket receive buffer). */ - skb_unlink(skb, &session->reorder_q); skb_orphan(skb); tunnel->stats.rx_packets++; @@ -470,6 +470,11 @@ static void pppol2tp_recv_dequeue(struct pppol2tp_session *session) goto out; } } + __skb_unlink(skb, &session->reorder_q); + + /* Process the skb. We release the queue lock while we + * do so to let other contexts process the queue. + */ spin_unlock_bh(&session->reorder_q.lock); pppol2tp_recv_dequeue_skb(session, skb); spin_lock_bh(&session->reorder_q.lock); -- cgit v1.2.2 From 09a76031f19bc77beb081e8ff7bfde731af93f50 Mon Sep 17 00:00:00 2001 From: SDiZ Date: Wed, 5 Mar 2008 18:43:50 -0800 Subject: bluetooth: CONWISE Technology based adapters with buggy SCO support (bugzilla #9027) From: SDiZ Fix the CONWISE Technology based adapters with buggy SCO support issue (bugzilla #9027) Signed-off-by: Andrew Morton Acked-by: Marcel Holtmann Signed-off-by: David S. Miller --- drivers/bluetooth/hci_usb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c index 372c7ef633da..4f8a744c90b7 100644 --- a/drivers/bluetooth/hci_usb.c +++ b/drivers/bluetooth/hci_usb.c @@ -148,6 +148,9 @@ static struct usb_device_id blacklist_ids[] = { { USB_DEVICE(0x0400, 0x0807), .driver_info = HCI_BROKEN_ISOC }, { USB_DEVICE(0x0400, 0x080a), .driver_info = HCI_BROKEN_ISOC }, + /* CONWISE Technology based adapters with buggy SCO support */ + { USB_DEVICE(0x0e5e, 0x6622), .driver_info = HCI_BROKEN_ISOC }, + /* Belkin F8T012 and F8T013 devices */ { USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, { USB_DEVICE(0x050d, 0x0013), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, -- cgit v1.2.2 From 147e2d59833e994cc99341806a88b9e59be41391 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Wed, 5 Mar 2008 18:45:59 -0800 Subject: bluetooth: hci_core: defer hci_unregister_sysfs() Alon Bar-Lev reports: Feb 16 23:41:33 alon1 usb 3-1: configuration #1 chosen from 1 choice Feb 16 23:41:33 alon1 BUG: unable to handle kernel NULL pointer dereference at virtual address 00000008 Feb 16 23:41:33 alon1 printing eip: c01b2db6 *pde = 00000000 Feb 16 23:41:33 alon1 Oops: 0000 [#1] PREEMPT Feb 16 23:41:33 alon1 Modules linked in: ppp_deflate zlib_deflate zlib_inflate bsd_comp ppp_async rfcomm l2cap hci_usb vmnet(P) vmmon(P) tun radeon drm autofs4 ipv6 aes_generic crypto_algapi ieee80211_crypt_ccmp nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat ipt_REJECT xt_tcpudp ipt_LOG xt_limit xt_state nf_conntrack_ipv4 nf_conntrack iptable_filter ip_tables x_tables snd_pcm_oss snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device bluetooth ppp_generic slhc ioatdma dca cfq_iosched cpufreq_powersave cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table uinput fan af_packet nls_cp1255 nls_iso8859_1 nls_utf8 nls_base pcmcia snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm nsc_ircc snd_timer ipw2200 thinkpad_acpi irda snd ehci_hcd yenta_socket uhci_hcd psmouse ieee80211 soundcore intel_agp hwmon rsrc_nonstatic pcspkr e1000 crc_ccitt snd_page_alloc i2c_i801 ieee80211_crypt pcmcia_core agpgart thermal bat! tery nvram rtc sr_mod ac sg firmware_class button processor cdrom unix usbcore evdev ext3 jbd ext2 mbcache loop ata_piix libata sd_mod scsi_mod Feb 16 23:41:33 alon1 Feb 16 23:41:33 alon1 Pid: 4, comm: events/0 Tainted: P (2.6.24-gentoo-r2 #1) Feb 16 23:41:33 alon1 EIP: 0060:[] EFLAGS: 00010282 CPU: 0 Feb 16 23:41:33 alon1 EIP is at sysfs_get_dentry+0x26/0x80 Feb 16 23:41:33 alon1 EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: f48a2210 Feb 16 23:41:33 alon1 ESI: f72eb900 EDI: f4803ae0 EBP: f4803ae0 ESP: f7c49efc Feb 16 23:41:33 alon1 hcid[7004]: HCI dev 0 registered Feb 16 23:41:33 alon1 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Feb 16 23:41:33 alon1 Process events/0 (pid: 4, ti=f7c48000 task=f7c3efc0 task.ti=f7c48000) Feb 16 23:41:33 alon1 Stack: f7cb6140 f4822668 f7e71e10 c01b304d ffffffff ffffffff fffffffe c030ba9c Feb 16 23:41:33 alon1 f7cb6140 f4822668 f6da6720 f7cb6140 f4822668 f6da6720 c030ba8e c01ce20b Feb 16 23:41:33 alon1 f6e9dd00 c030ba8e f6da6720 f6e9dd00 f6e9dd00 00000000 f4822600 00000000 Feb 16 23:41:33 alon1 Call Trace: Feb 16 23:41:33 alon1 [] sysfs_move_dir+0x3d/0x1f0 Feb 16 23:41:33 alon1 [] kobject_move+0x9b/0x120 Feb 16 23:41:33 alon1 [] device_move+0x51/0x110 Feb 16 23:41:33 alon1 [] del_conn+0x0/0x70 [bluetooth] Feb 16 23:41:33 alon1 [] del_conn+0x19/0x70 [bluetooth] Feb 16 23:41:33 alon1 [] run_workqueue+0x81/0x140 Feb 16 23:41:33 alon1 [] schedule+0x168/0x2e0 Feb 16 23:41:33 alon1 [] autoremove_wake_function+0x0/0x50 Feb 16 23:41:33 alon1 [] worker_thread+0x9b/0xf0 Feb 16 23:41:33 alon1 [] autoremove_wake_function+0x0/0x50 Feb 16 23:41:33 alon1 [] worker_thread+0x0/0xf0 Feb 16 23:41:33 alon1 [] kthread+0x42/0x70 Feb 16 23:41:33 alon1 [] kthread+0x0/0x70 Feb 16 23:41:33 alon1 [] kernel_thread_helper+0x7/0x18 Feb 16 23:41:33 alon1 ======================= Feb 16 23:41:33 alon1 Code: 26 00 00 00 00 57 89 c7 a1 50 1b 3a c0 56 53 8b 70 38 85 f6 74 08 8b 0e 85 c9 74 58 ff 06 8b 56 50 39 fa 74 47 89 fb eb 02 89 c3 <8b> 43 08 39 c2 75 f7 8b 46 08 83 c0 68 e8 98 e7 10 00 8b 43 10 Feb 16 23:41:33 alon1 EIP: [] sysfs_get_dentry+0x26/0x80 SS:ESP 0068:f7c49efc Feb 16 23:41:33 alon1 ---[ end trace aae864e9592acc1d ]--- Defer hci_unregister_sysfs because hci device could be destructed while hci conn devices still there. Signed-off-by: Dave Young Tested-by: Stefan Seyfried Acked-by: Alon Bar-Lev Signed-off-by: Andrew Morton Acked-by: Marcel Holtmann --- net/bluetooth/hci_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 930b58e7149a..aec6929f5c16 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -902,8 +902,6 @@ int hci_unregister_dev(struct hci_dev *hdev) BT_DBG("%p name %s type %d", hdev, hdev->name, hdev->type); - hci_unregister_sysfs(hdev); - write_lock_bh(&hci_dev_list_lock); list_del(&hdev->list); write_unlock_bh(&hci_dev_list_lock); @@ -915,6 +913,8 @@ int hci_unregister_dev(struct hci_dev *hdev) hci_notify(hdev, HCI_DEV_UNREG); + hci_unregister_sysfs(hdev); + __hci_dev_put(hdev); return 0; -- cgit v1.2.2 From 04005dd9ae7bf1031408869c33df96149ebb1086 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 5 Mar 2008 18:47:03 -0800 Subject: bluetooth: Make hci_sock_cleanup() return void hci_sock_cleanup() always returns 0 and its return value isn't used anywhere in the code. Compile-tested with 'make allyesconfig && make net/bluetooth/bluetooth.ko' Signed-off-by: Tobias Klauser Signed-off-by: Andrew Morton Acked-by: Marcel Holtmann --- include/net/bluetooth/bluetooth.h | 2 +- net/bluetooth/hci_sock.c | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 771d17783c18..750648df13f4 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -170,7 +170,7 @@ static inline int skb_frags_no(struct sk_buff *skb) int bt_err(__u16 code); extern int hci_sock_init(void); -extern int hci_sock_cleanup(void); +extern void hci_sock_cleanup(void); extern int bt_sysfs_init(void); extern void bt_sysfs_cleanup(void); diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 14991323c273..b5d4019d3572 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -734,7 +734,7 @@ error: return err; } -int __exit hci_sock_cleanup(void) +void __exit hci_sock_cleanup(void) { if (bt_sock_unregister(BTPROTO_HCI) < 0) BT_ERR("HCI socket unregistration failed"); @@ -742,6 +742,4 @@ int __exit hci_sock_cleanup(void) hci_unregister_notifier(&hci_sock_nblock); proto_unregister(&hci_sk_proto); - - return 0; } -- cgit v1.2.2 From a4e2acf01a7e5fcd960fc332335ca10313641f4b Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 5 Mar 2008 18:47:40 -0800 Subject: bluetooth: make bnep_sock_cleanup() return void bnep_sock_cleanup() always returns 0 and its return value isn't used anywhere in the code. Signed-off-by: Tobias Klauser Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- net/bluetooth/bnep/bnep.h | 2 +- net/bluetooth/bnep/sock.c | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/net/bluetooth/bnep/bnep.h b/net/bluetooth/bnep/bnep.h index a2992280c3d1..e69244dd8de8 100644 --- a/net/bluetooth/bnep/bnep.h +++ b/net/bluetooth/bnep/bnep.h @@ -174,7 +174,7 @@ struct bnep_session { void bnep_net_setup(struct net_device *dev); int bnep_sock_init(void); -int bnep_sock_cleanup(void); +void bnep_sock_cleanup(void); static inline int bnep_mc_hash(__u8 *addr) { diff --git a/net/bluetooth/bnep/sock.c b/net/bluetooth/bnep/sock.c index 81065e548a1f..201e5b1ce473 100644 --- a/net/bluetooth/bnep/sock.c +++ b/net/bluetooth/bnep/sock.c @@ -257,12 +257,10 @@ error: return err; } -int __exit bnep_sock_cleanup(void) +void __exit bnep_sock_cleanup(void) { if (bt_sock_unregister(BTPROTO_BNEP) < 0) BT_ERR("Can't unregister BNEP socket"); proto_unregister(&bnep_proto); - - return 0; } -- cgit v1.2.2 From 32c9874759651b69e496f89ec9e5e6702f67ffca Mon Sep 17 00:00:00 2001 From: Jon Schindler Date: Wed, 5 Mar 2008 18:49:21 -0800 Subject: drivers/net/appletalk/ltpc.c: replace init_module&cleanup_module with module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/appletalk/ltpc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index 6ab2c2d4d673..fef5560bc7a2 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -1252,7 +1252,7 @@ module_param(irq, int, 0); module_param(dma, int, 0); -int __init init_module(void) +static int __init ltpc_module_init(void) { if(io == 0) printk(KERN_NOTICE @@ -1263,6 +1263,7 @@ int __init init_module(void) return PTR_ERR(dev_ltpc); return 0; } +module_init(ltpc_module_init); #endif static void __exit ltpc_cleanup(void) -- cgit v1.2.2 From 7249d4c3985454ee5cd150198bb21cb15dee242e Mon Sep 17 00:00:00 2001 From: Jon Schindler Date: Wed, 5 Mar 2008 18:49:51 -0800 Subject: drivers/net/arcnet/capmode.c: replace init_module&cleanup_module with module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/arcnet/capmode.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/arcnet/capmode.c b/drivers/net/arcnet/capmode.c index cc4610db6395..02cb8f1c1148 100644 --- a/drivers/net/arcnet/capmode.c +++ b/drivers/net/arcnet/capmode.c @@ -80,17 +80,19 @@ void arcnet_cap_init(void) #ifdef MODULE -int __init init_module(void) +static int __init capmode_module_init(void) { printk(VERSION); arcnet_cap_init(); return 0; } -void cleanup_module(void) +static void __exit capmode_module_exit(void) { arcnet_unregister_proto(&capmode_proto); } +module_init(capmode_module_init); +module_exit(capmode_module_exit); MODULE_LICENSE("GPL"); #endif /* MODULE */ -- cgit v1.2.2 From 3cfbb6771b11c161aaee0cc839f923fc208868b8 Mon Sep 17 00:00:00 2001 From: Jon Schindler Date: Wed, 5 Mar 2008 18:50:16 -0800 Subject: drivers/net/apne.c: replace init_module&cleanup_module with module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/apne.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/apne.c b/drivers/net/apne.c index c12cbdf368b1..47a8275d3962 100644 --- a/drivers/net/apne.c +++ b/drivers/net/apne.c @@ -569,7 +569,7 @@ static irqreturn_t apne_interrupt(int irq, void *dev_id) #ifdef MODULE static struct net_device *apne_dev; -int __init init_module(void) +static int __init apne_module_init(void) { apne_dev = apne_probe(-1); if (IS_ERR(apne_dev)) @@ -577,7 +577,7 @@ int __init init_module(void) return 0; } -void __exit cleanup_module(void) +static void __exit apne_module_exit(void) { unregister_netdev(apne_dev); @@ -591,7 +591,8 @@ void __exit cleanup_module(void) free_netdev(apne_dev); } - +module_init(apne_module_init); +module_exit(apne_module_exit); #endif static int init_pcmcia(void) -- cgit v1.2.2 From e8a1d919d16abaccc4564bd913cac9a0c1aaf078 Mon Sep 17 00:00:00 2001 From: Jon Schindler Date: Wed, 5 Mar 2008 18:50:41 -0800 Subject: drivers/net/ac3200.c: replace init_module&cleanup_module with module_init&module_exit Replace init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/ac3200.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ac3200.c b/drivers/net/ac3200.c index 5136d94923aa..b1448637107f 100644 --- a/drivers/net/ac3200.c +++ b/drivers/net/ac3200.c @@ -369,7 +369,7 @@ MODULE_PARM_DESC(mem, "Memory base address(es)"); MODULE_DESCRIPTION("Ansel AC3200 EISA ethernet driver"); MODULE_LICENSE("GPL"); -int __init init_module(void) +static int __init ac3200_module_init(void) { struct net_device *dev; int this_dev, found = 0; @@ -404,8 +404,7 @@ static void cleanup_card(struct net_device *dev) iounmap(ei_status.mem); } -void __exit -cleanup_module(void) +static void __exit ac3200_module_exit(void) { int this_dev; @@ -418,4 +417,6 @@ cleanup_module(void) } } } +module_init(ac3200_module_init); +module_exit(ac3200_module_exit); #endif /* MODULE */ -- cgit v1.2.2 From 02ff05c49d7804f2574f358a937b43a41d15e36e Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 5 Mar 2008 18:51:19 -0800 Subject: net/enc28j60: oops fix Prevent oops on enc28j60 packet RX: make sure buffers are aligned. Not all architectures support unaligned accesses in kernel space. Signed-off-by: David Brownell Acked-by: Claudio Lanconelli Signed-off-by: David S. Miller --- drivers/net/enc28j60.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 0809a6a5a286..46a90e9ec563 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -900,7 +900,7 @@ static void enc28j60_hw_rx(struct net_device *ndev) if (RSV_GETBIT(rxstat, RSV_LENCHECKERR)) ndev->stats.rx_frame_errors++; } else { - skb = dev_alloc_skb(len); + skb = dev_alloc_skb(len + NET_IP_ALIGN); if (!skb) { if (netif_msg_rx_err(priv)) dev_err(&ndev->dev, @@ -908,6 +908,7 @@ static void enc28j60_hw_rx(struct net_device *ndev) ndev->stats.rx_dropped++; } else { skb->dev = ndev; + skb_reserve(skb, NET_IP_ALIGN); /* copy the packet from the receive buffer */ enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv), len, skb_put(skb, len)); -- cgit v1.2.2 From 1ff82fe0024e8070c38346b8abc1ff09612dea4c Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 5 Mar 2008 18:53:55 -0800 Subject: RxRPC: fix rxrpc_recvmsg()'s returning of msg_name Fix rxrpc_recvmsg() to return msg_name correctly. We shouldn't overwrite the *msg struct, but should rather write into msg->msg_name (there's a '&' unary operator that shouldn't be there). Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- net/rxrpc/ar-recvmsg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/rxrpc/ar-recvmsg.c b/net/rxrpc/ar-recvmsg.c index f19121d4795b..a39bf97f8830 100644 --- a/net/rxrpc/ar-recvmsg.c +++ b/net/rxrpc/ar-recvmsg.c @@ -143,7 +143,8 @@ int rxrpc_recvmsg(struct kiocb *iocb, struct socket *sock, /* copy the peer address and timestamp */ if (!continue_call) { if (msg->msg_name && msg->msg_namelen > 0) - memcpy(&msg->msg_name, &call->conn->trans->peer->srx, + memcpy(msg->msg_name, + &call->conn->trans->peer->srx, sizeof(call->conn->trans->peer->srx)); sock_recv_timestamp(msg, &rx->sk, skb); } -- cgit v1.2.2 From d4423fd07919756342dffffac45ee068d0a7f5a5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 6 Mar 2008 13:27:16 +0200 Subject: ARM: OMAP1: Refresh OSK defconfig Refresh OSK defconfig Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_osk_5912_defconfig | 113 ++++++++++++++++++++++++------- 1 file changed, 89 insertions(+), 24 deletions(-) diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig index d592a6487114..600be0f0e956 100644 --- a/arch/arm/configs/omap_osk_5912_defconfig +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc5 -# Mon Dec 17 21:12:45 2007 +# Linux kernel version: 2.6.25-rc3 +# Mon Mar 3 03:35:17 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -39,17 +40,22 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -63,17 +69,26 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -101,6 +116,8 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # # System Type @@ -129,6 +146,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -138,6 +156,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set # # TI OMAP Implementations @@ -154,6 +173,7 @@ CONFIG_OMAP_MUX=y # CONFIG_OMAP_MUX_DEBUG is not set CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 @@ -275,6 +295,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# CONFIG_ATAGS_PROC is not set # # CPU Frequency scaling @@ -307,9 +328,10 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -326,6 +348,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -381,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -493,11 +517,13 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m @@ -519,7 +545,6 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -553,6 +578,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # @@ -574,7 +600,6 @@ CONFIG_PPP_MULTILINK=y # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=y -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -671,6 +696,7 @@ CONFIG_HW_RANDOM_OMAP=m # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y @@ -698,12 +724,10 @@ CONFIG_I2C_OMAP=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TPS65010=y @@ -731,6 +755,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -758,6 +783,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -765,6 +791,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -780,6 +807,7 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set # # Multimedia devices @@ -865,10 +893,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set @@ -889,12 +913,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -948,8 +970,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1019,9 +1043,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1045,7 +1066,51 @@ CONFIG_FRAME_POINTER=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines -- cgit v1.2.2 From d68a8ce8343365f8560fa9f89300fb4cd2415459 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 6 Mar 2008 13:27:16 +0200 Subject: ARM: OMAP1: Refresh H2 defconfig Refresh H2 defconfig Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_h2_1610_defconfig | 71 +++++++++++++++++++++++---------- 1 file changed, 49 insertions(+), 22 deletions(-) diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index c2345af3707a..323c1deeb953 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc5 -# Mon Dec 17 20:04:38 2007 +# Linux kernel version: 2.6.25-rc3 +# Mon Mar 3 03:39:48 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,17 +41,22 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -64,17 +70,26 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -102,6 +117,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # # System Type @@ -130,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -139,6 +157,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM7X00A is not set # # TI OMAP Implementations @@ -155,6 +174,7 @@ CONFIG_OMAP_MUX=y # CONFIG_OMAP_MUX_DEBUG is not set CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 @@ -266,6 +286,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# CONFIG_ATAGS_PROC is not set # # CPU Frequency scaling @@ -311,9 +332,10 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y -CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -330,6 +352,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -384,6 +407,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -421,11 +445,13 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HAVE_IDE is not set # # SCSI device support @@ -489,6 +515,7 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # @@ -512,7 +539,6 @@ CONFIG_SLIP_COMPRESSED=y CONFIG_SLHC=y # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -616,12 +642,10 @@ CONFIG_I2C_OMAP=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TPS65010=y @@ -649,6 +673,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -676,6 +701,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -683,6 +709,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -705,6 +732,7 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set # # Multimedia devices @@ -802,10 +830,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set @@ -826,12 +850,10 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -874,8 +896,10 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -946,9 +970,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -975,6 +996,7 @@ CONFIG_FRAME_POINTER=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -992,6 +1014,9 @@ CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1006,12 +1031,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # -- cgit v1.2.2 From 19dc8a5b06aba0db11a600c10db5bc99839f098a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 6 Mar 2008 13:28:06 +0200 Subject: ARM: OMAP1: Compile in other 16xx boards to OSK defconfig This allows monitoring compile issues with Kautobuild for other omap1 boards until we have more board specific defconfig files. After 2.6.25, we can add a generic config_omap_generic16xx to compile in support for all 16xx boards and then remove other boards from OSK defconfig. Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_osk_5912_defconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig index 600be0f0e956..d4ca5e6e4ffa 100644 --- a/arch/arm/configs/omap_osk_5912_defconfig +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -193,13 +193,13 @@ CONFIG_ARCH_OMAP16XX=y # # OMAP Board Type # -# CONFIG_MACH_OMAP_INNOVATOR is not set -# CONFIG_MACH_OMAP_H2 is not set -# CONFIG_MACH_OMAP_H3 is not set +CONFIG_MACH_OMAP_INNOVATOR=y +CONFIG_MACH_OMAP_H2=y +CONFIG_MACH_OMAP_H3=y CONFIG_MACH_OMAP_OSK=y # CONFIG_OMAP_OSK_MISTRAL is not set -# CONFIG_MACH_NOKIA770 is not set -# CONFIG_MACH_OMAP_GENERIC is not set +CONFIG_MACH_NOKIA770=y +CONFIG_MACH_OMAP_GENERIC=y # # OMAP CPU Speed -- cgit v1.2.2 From 09f21ed4c1bd158a92114074c268e4a835690ca5 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Wed, 20 Feb 2008 15:30:06 -0800 Subject: ARM: OMAP2: Register the L4 io bus to boot OMAP2 This patch enables OMAP2 to boot. Signed-off-by: Kyungmin Park Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/io.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 5a4091f582ed..69c8174f3aac 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -42,6 +42,12 @@ static struct map_desc omap2_io_desc[] __initdata = { .length = L3_24XX_SIZE, .type = MT_DEVICE }, + { + .virtual = L4_24XX_VIRT, + .pfn = __phys_to_pfn(L4_24XX_PHYS), + .length = L4_24XX_SIZE, + .type = MT_DEVICE + }, #ifdef CONFIG_ARCH_OMAP2430 { .virtual = L4_WK_243X_VIRT, -- cgit v1.2.2 From be73a347ec7799aec0aa1008bd991f93dbfa80e8 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 29 Feb 2008 21:12:57 +0100 Subject: [ARM] 4845/1: Orion: Ignore memory tags with invalid data The DNS-323, Kurobox-Pro / Linkstation-Pro, QNAP TS-109/TS-209 and some other orion-based systems have several bogus memory entries in the tag table, which causes the system to crash at startup. Ignore them by resetting the tag ID to 0 in a machine fixup function. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Russell King --- arch/arm/mach-orion/common.c | 20 ++++++++++++++++++++ arch/arm/mach-orion/common.h | 6 ++++++ arch/arm/mach-orion/dns323-setup.c | 1 + arch/arm/mach-orion/kurobox_pro-setup.c | 1 + arch/arm/mach-orion/ts209-setup.c | 1 + 5 files changed, 29 insertions(+) diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c index 5f0ee4b8a9b7..2d6d413f0235 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion/common.c @@ -17,7 +17,9 @@ #include #include #include +#include #include +#include #include #include #include "common.h" @@ -347,3 +349,21 @@ void __init orion_init(void) platform_device_register(&orion_ehci1); platform_device_register(&orion_i2c); } + +/* + * Many orion-based systems have buggy bootloader implementations. + * This is a common fixup for bogus memory tags. + */ +void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t, + char **from, struct meminfo *meminfo) +{ + for (; t->hdr.size; t = tag_next(t)) + if (t->hdr.tag == ATAG_MEM && + (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK || + t->u.mem.start & ~PAGE_MASK)) { + printk(KERN_WARNING + "Clearing invalid memory bank %dKB@0x%08x\n", + t->u.mem.size / 1024, t->u.mem.start); + t->hdr.tag = 0; + } +} diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h index 10154ec885df..501497cc2c4d 100644 --- a/arch/arm/mach-orion/common.h +++ b/arch/arm/mach-orion/common.h @@ -83,4 +83,10 @@ struct mv_sata_platform_data; void __init orion_sata_init(struct mv_sata_platform_data *sata_data); +struct machine_desc; +struct meminfo; +struct tag; +extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, + char **, struct meminfo *); + #endif /* __ARCH_ORION_COMMON_H__ */ diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c index 02b280c24820..076e155ad510 100644 --- a/arch/arm/mach-orion/dns323-setup.c +++ b/arch/arm/mach-orion/dns323-setup.c @@ -319,4 +319,5 @@ MACHINE_START(DNS323, "D-Link DNS-323") .map_io = orion_map_io, .init_irq = orion_init_irq, .timer = &orion_timer, + .fixup = tag_fixup_mem32, MACHINE_END diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c index 6817aca4aa26..785a07bdf1e2 100644 --- a/arch/arm/mach-orion/kurobox_pro-setup.c +++ b/arch/arm/mach-orion/kurobox_pro-setup.c @@ -240,4 +240,5 @@ MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") .map_io = orion_map_io, .init_irq = orion_init_irq, .timer = &orion_timer, + .fixup = tag_fixup_mem32, MACHINE_END diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c index b8cfe6813e9d..45764dad16d0 100644 --- a/arch/arm/mach-orion/ts209-setup.c +++ b/arch/arm/mach-orion/ts209-setup.c @@ -357,4 +357,5 @@ MACHINE_START(TS209, "QNAP TS-109/TS-209") .map_io = orion_map_io, .init_irq = orion_init_irq, .timer = &orion_timer, + .fixup = tag_fixup_mem32, MACHINE_END -- cgit v1.2.2 From 10debfd29c639366f26595606b51abd27ccbb028 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 5 Mar 2008 08:44:13 -0800 Subject: [ARM] include/asm-arm - use angle brackets for includes Signed-off-by: Joe Perches include/asm-arm/plat-s3c/uncompress.h | 4 ++-- include/asm-arm/proc-fns.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) Signed-off-by: Russell King --- include/asm-arm/plat-s3c/uncompress.h | 4 ++-- include/asm-arm/proc-fns.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/asm-arm/plat-s3c/uncompress.h b/include/asm-arm/plat-s3c/uncompress.h index b5e6208175d1..19b9eda39485 100644 --- a/include/asm-arm/plat-s3c/uncompress.h +++ b/include/asm-arm/plat-s3c/uncompress.h @@ -27,8 +27,8 @@ static void arch_detect_cpu(void); /* defines for UART registers */ -#include "asm/plat-s3c/regs-serial.h" -#include "asm/plat-s3c/regs-watchdog.h" +#include +#include /* working in physical space... */ #undef S3C2410_WDOGREG diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h index a4ce457199d3..75ec760f4c74 100644 --- a/include/asm-arm/proc-fns.h +++ b/include/asm-arm/proc-fns.h @@ -214,9 +214,9 @@ #ifndef __ASSEMBLY__ #ifndef MULTI_CPU -#include "asm/cpu-single.h" +#include #else -#include "asm/cpu-multi32.h" +#include #endif #include -- cgit v1.2.2 From b24061fadc2b996fd38baaf01986eac666d0c61b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 4 Mar 2008 21:56:21 +0100 Subject: [ARM] 4847/1: kprobes: fix compilation with CONFIG_DEBUG_FS=y Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/kprobes.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index a22a98c43ca5..13e371aad879 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -431,6 +431,11 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) return 0; } +int __kprobes arch_trampoline_kprobe(struct kprobe *p) +{ + return 0; +} + static struct undef_hook kprobes_break_hook = { .instr_mask = 0xffffffff, .instr_val = KPROBE_BREAKPOINT_INSTRUCTION, -- cgit v1.2.2 From 37aca70c626ce8f4e5848de2d4892b5ed74a6875 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 5 Mar 2008 00:08:29 +0100 Subject: [ARM] 4848/1: at91: remove false lockdep warnings Remove false lockdep warnings about lock recursion when declaring IRQs as being wake-capable, by marking putting GPIO irq_desc locks into their own class. (Thanks to Peter Zijlstra for helping track down such a small fix to this problem.) Signed-off-by: David Brownell Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/gpio.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index f629c2b5f0c5..ee4964abcaf5 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -490,6 +490,11 @@ postcore_initcall(at91_gpio_debugfs_init); /*--------------------------------------------------------------------------*/ +/* This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + /* * Called from the processor-specific init to enable GPIO interrupt support. */ @@ -510,6 +515,8 @@ void __init at91_gpio_irq_setup(void) __raw_writel(~0, this->regbase + PIO_IDR); for (i = 0, pin = this->chipbase; i < 32; i++, pin++) { + lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class); + /* * Can use the "simple" and not "edge" handler since it's * shorter, and the AIC handles interrupts sanely. -- cgit v1.2.2 From 9c4c9f38796faf750de8586becf43b769c76b674 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 5 Mar 2008 06:50:07 +0100 Subject: [ARM] 4849/1: move ATAGS asm definitions Move the definitions of ATAG_CORE and ATAG_CORE_SIZE in head.S to head-common.S. There is no use of these in head.S itself, but they are used in head-common.S. When building for the !CONFIG_MMU case these were not defined when compiling head-nommu.S (which includes head-common.S). Signed-off-by: Greg Ungerer Signed-off-by: Russell King --- arch/arm/kernel/head-common.S | 3 +++ arch/arm/kernel/head.S | 3 --- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 024a9cf469b4..50f667febe29 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -11,6 +11,9 @@ * */ +#define ATAG_CORE 0x54410001 +#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) + .type __switch_data, %object __switch_data: .long __mmap_switched diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 7898cbc9861a..bff4c6e90dd5 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -29,9 +29,6 @@ #define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) #define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET) -#define ATAG_CORE 0x54410001 -#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) - /* * swapper_pg_dir is the virtual address of the initial page table. -- cgit v1.2.2 From 92df78519d0a6a8677cb827b5a1b7d2520d7e202 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 5 Mar 2008 06:59:14 +0100 Subject: [ARM] 4850/1: include generic pgtable.h for !CONFIG_MMU case The nonmmu version of pgtable.h needs to include asm-generic/pgtable.h as well. It needs to pick up empty definitions of things like arch_enter_lazy_cpu_mode() to compile cleanly. Signed-off-by: Greg Ungerer Signed-off-by: Russell King --- include/asm-arm/pgtable-nommu.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h index 33c83dd87965..2e5868bbe03b 100644 --- a/include/asm-arm/pgtable-nommu.h +++ b/include/asm-arm/pgtable-nommu.h @@ -92,6 +92,8 @@ extern unsigned int kobjsize(const void *objp); #define FIRST_USER_ADDRESS (0) +#include + #else /* -- cgit v1.2.2 From 8e86f4271aaac7685923b80cf57972be41afbc1d Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Tue, 4 Mar 2008 15:08:02 -0800 Subject: [ARM] replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Russell King --- arch/arm/common/it8152.c | 6 ++-- arch/arm/mach-h720x/common.c | 12 +++---- arch/arm/mach-imx/dma.c | 12 +++---- arch/arm/mach-imx/irq.c | 6 ++-- arch/arm/mach-iop13xx/iq81340mc.c | 2 +- arch/arm/mach-iop13xx/iq81340sc.c | 2 +- arch/arm/mach-iop13xx/pci.c | 8 ++--- arch/arm/mach-iop13xx/setup.c | 2 +- arch/arm/mach-ixp4xx/common-pci.c | 2 +- arch/arm/mach-ixp4xx/gtwx5715-pci.c | 2 +- arch/arm/mach-netx/generic.c | 6 ++-- arch/arm/mach-orion/gpio.c | 12 +++---- arch/arm/mach-pnx4008/clock.c | 2 +- arch/arm/mach-pnx4008/dma.c | 2 +- arch/arm/mach-pxa/cm-x270-pci.c | 2 +- arch/arm/mach-pxa/cm-x270.c | 4 +-- arch/arm/mach-pxa/dma.c | 2 +- arch/arm/mach-pxa/em-x270.c | 2 +- arch/arm/mach-pxa/mainstone.c | 4 +-- arch/arm/mach-pxa/trizeps4.c | 8 ++--- arch/arm/mach-sa1100/badge4.c | 6 ++-- arch/arm/mach-sa1100/cpu-sa1100.c | 2 +- arch/arm/mach-sa1100/dma.c | 8 ++--- arch/arm/mach-sa1100/h3600.c | 14 ++++---- arch/arm/plat-iop/pci.c | 2 +- arch/arm/plat-omap/dma.c | 4 +-- arch/arm/plat-omap/dmtimer.c | 2 +- arch/arm/plat-s3c24xx/dma.c | 64 ++++++++++++++++++------------------- 28 files changed, 100 insertions(+), 100 deletions(-) diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 97b7dc13d9aa..538262241483 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -274,7 +274,7 @@ static int it8152_pci_platform_notify_remove(struct device *dev) int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) { dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", - __FUNCTION__, dma_addr, size); + __func__, dma_addr, size); return (dev->bus == &pci_bus_type) && ((dma_addr + size - PHYS_OFFSET) >= SZ_64M); } @@ -289,7 +289,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) */ int pci_set_dma_mask(struct pci_dev *dev, u64 mask) { - dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask); + dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask); if (mask >= PHYS_OFFSET + SZ_64M - 1) return 0; @@ -299,7 +299,7 @@ int pci_set_dma_mask(struct pci_dev *dev, u64 mask) int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) { - dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask); + dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask); if (mask >= PHYS_OFFSET + SZ_64M - 1) return 0; diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index 7f31816896ad..45144ad2bed9 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -103,7 +103,7 @@ static void h720x_gpio_handler(unsigned int mask, unsigned int irq, struct irq_desc *desc) { - IRQDBG("%s irq: %d\n",__FUNCTION__,irq); + IRQDBG("%s irq: %d\n", __func__, irq); desc = irq_desc + irq; while (mask) { if (mask & 1) { @@ -123,7 +123,7 @@ h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT); irq = IRQ_CHAINED_GPIOA(0); - IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq); + IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); h720x_gpio_handler(mask, irq, desc); } @@ -133,7 +133,7 @@ h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc) unsigned int mask, irq; mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT); irq = IRQ_CHAINED_GPIOB(0); - IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq); + IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); h720x_gpio_handler(mask, irq, desc); } @@ -144,7 +144,7 @@ h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT); irq = IRQ_CHAINED_GPIOC(0); - IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq); + IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); h720x_gpio_handler(mask, irq, desc); } @@ -155,7 +155,7 @@ h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT); irq = IRQ_CHAINED_GPIOD(0); - IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq); + IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); h720x_gpio_handler(mask, irq, desc); } @@ -167,7 +167,7 @@ h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc) mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT); irq = IRQ_CHAINED_GPIOE(0); - IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq); + IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq); h720x_gpio_handler(mask, irq, desc); } #endif diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c index bc6fb02d213b..a59ff2987cb7 100644 --- a/arch/arm/mach-imx/dma.c +++ b/arch/arm/mach-imx/dma.c @@ -54,7 +54,7 @@ static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount) if (!imxdma->name) { printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return 0; } @@ -288,7 +288,7 @@ imx_dma_setup_handlers(imx_dmach_t dma_ch, if (!imxdma->name) { printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return -ENODEV; } @@ -321,7 +321,7 @@ void imx_dma_enable(imx_dmach_t dma_ch) if (!imxdma->name) { printk(KERN_CRIT "%s: called for not allocated channel %d\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return; } @@ -365,7 +365,7 @@ int imx_dma_request(imx_dmach_t dma_ch, const char *name) if (dma_ch >= IMX_DMA_CHANNELS) { printk(KERN_CRIT "%s: called for non-existed channel %d\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return -EINVAL; } @@ -396,7 +396,7 @@ void imx_dma_free(imx_dmach_t dma_ch) if (!imxdma->name) { printk(KERN_CRIT "%s: trying to free channel %d which is already freed\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return; } @@ -456,7 +456,7 @@ imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name, } } - printk(KERN_ERR "%s: no free DMA channel found\n", __FUNCTION__); + printk(KERN_ERR "%s: no free DMA channel found\n", __func__); return -ENODEV; } diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c index a7465db84893..e6695c4e623b 100644 --- a/arch/arm/mach-imx/irq.c +++ b/arch/arm/mach-imx/irq.c @@ -160,21 +160,21 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) static void imx_gpio_ack_irq(unsigned int irq) { - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq); + DEBUG_IRQ("%s: irq %d\n", __func__, irq); ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32); } static void imx_gpio_mask_irq(unsigned int irq) { - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq); + DEBUG_IRQ("%s: irq %d\n", __func__, irq); IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32)); } static void imx_gpio_unmask_irq(unsigned int irq) { - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq); + DEBUG_IRQ("%s: irq %d\n", __func__, irq); IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32); } diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 268a8d84999c..77b24cd1d88d 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -81,7 +81,7 @@ static void __init iq81340mc_init(void) static void __init iq81340mc_timer_init(void) { unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio(); - printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq); + printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq); iop_init_time(bus_freq); } diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index a51ffd2683e5..e8522b3b8163 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -83,7 +83,7 @@ static void __init iq81340sc_init(void) static void __init iq81340sc_timer_init(void) { unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio(); - printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq); + printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq); iop_init_time(bus_freq); } diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 99d94cb1bafd..7825c1aaa27b 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -94,13 +94,13 @@ void iop13xx_map_pci_memory(void) , 0, iop13xx_atux_mem_size, MT_DEVICE); if (!iop13xx_atux_mem_base) { printk("%s: atux allocation " - "failed\n", __FUNCTION__); + "failed\n", __func__); BUG(); } } else iop13xx_atux_mem_size = 0; PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n", - __FUNCTION__, atu, iop13xx_atux_mem_size, + __func__, atu, iop13xx_atux_mem_size, iop13xx_atux_mem_base); break; case 1: @@ -120,13 +120,13 @@ void iop13xx_map_pci_memory(void) , 0, iop13xx_atue_mem_size, MT_DEVICE); if (!iop13xx_atue_mem_base) { printk("%s: atue allocation " - "failed\n", __FUNCTION__); + "failed\n", __func__); BUG(); } } else iop13xx_atue_mem_size = 0; PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n", - __FUNCTION__, atu, iop13xx_atue_mem_size, + __func__, atu, iop13xx_atue_mem_size, iop13xx_atue_mem_base); break; } diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index bfe0c87e3397..246f6d478720 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -519,7 +519,7 @@ void __init iop13xx_platform_init(void) if (iq8134x_flash_resource.end > iq8134x_flash_resource.start) iop13xx_devices[plat_idx++] = &iq8134x_flash; else - printk(KERN_ERR "%s: Failed to probe flash size\n", __FUNCTION__); + printk(KERN_ERR "%s: Failed to probe flash size\n", __func__); #endif platform_add_devices(iop13xx_devices, plat_idx); diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index bf04121d1a31..64be341109b3 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -87,7 +87,7 @@ static inline int check_master_abort(void) if (isr & PCI_ISR_PFE) { /* make sure the Master Abort bit is reset */ *PCI_ISR = PCI_ISR_PFE; - pr_debug("%s failed\n", __FUNCTION__); + pr_debug("%s failed\n", __func__); return 1; } diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 0d5a42455820..49dec7868807 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -65,7 +65,7 @@ static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin) else rc = gtwx5715_irqmap[slot][pin-1]; - printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, rc); + printk("%s: Mapped slot %d pin %d to IRQ %d\n", __func__, slot, pin, rc); return(rc); } diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index b9ca8f98265d..fd7537f7d11e 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -133,7 +133,7 @@ netx_hif_ack_irq(unsigned int _irq) val &= ~((1 << 24) << irq); writel(val, NETX_DPMAS_INT_EN); - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq); + DEBUG_IRQ("%s: irq %d\n", __func__, _irq); } static void @@ -145,7 +145,7 @@ netx_hif_mask_irq(unsigned int _irq) val = readl(NETX_DPMAS_INT_EN); val &= ~((1 << 24) << irq); writel(val, NETX_DPMAS_INT_EN); - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq); + DEBUG_IRQ("%s: irq %d\n", __func__, _irq); } static void @@ -157,7 +157,7 @@ netx_hif_unmask_irq(unsigned int _irq) val = readl(NETX_DPMAS_INT_EN); val |= (1 << 24) << irq; writel(val, NETX_DPMAS_INT_EN); - DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq); + DEBUG_IRQ("%s: irq %d\n", __func__, _irq); } static struct irq_chip netx_hif_chip = { diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion/gpio.c index d5f00c86d616..f713818c66a3 100644 --- a/arch/arm/mach-orion/gpio.c +++ b/arch/arm/mach-orion/gpio.c @@ -36,7 +36,7 @@ int gpio_direction_input(unsigned pin) unsigned long flags; if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + pr_debug("%s: invalid GPIO %d\n", __func__, pin); return -EINVAL; } @@ -62,7 +62,7 @@ int gpio_direction_output(unsigned pin, int value) int mask; if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + pr_debug("%s: invalid GPIO %d\n", __func__, pin); return -EINVAL; } @@ -141,7 +141,7 @@ int gpio_request(unsigned pin, const char *label) unsigned long flags; if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + pr_debug("%s: invalid GPIO %d\n", __func__, pin); return -EINVAL; } @@ -149,7 +149,7 @@ int gpio_request(unsigned pin, const char *label) if (gpio_label[pin]) { pr_debug("%s: GPIO %d already used as %s\n", - __FUNCTION__, pin, gpio_label[pin]); + __func__, pin, gpio_label[pin]); ret = -EBUSY; } else gpio_label[pin] = label ? label : "?"; @@ -162,12 +162,12 @@ EXPORT_SYMBOL(gpio_request); void gpio_free(unsigned pin) { if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin); + pr_debug("%s: invalid GPIO %d\n", __func__, pin); return; } if (!gpio_label[pin]) - pr_warning("%s: GPIO %d already freed\n", __FUNCTION__, pin); + pr_warning("%s: GPIO %d already freed\n", __func__, pin); else gpio_label[pin] = NULL; } diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c index daa8d3d98eff..8e00ed43fb95 100644 --- a/arch/arm/mach-pnx4008/clock.c +++ b/arch/arm/mach-pnx4008/clock.c @@ -976,7 +976,7 @@ static int __init clk_init(void) (*clkp)->set_parent((*clkp), (*clkp)->parent); } pr_debug("%s: clock %s, rate %ld\n", - __FUNCTION__, (*clkp)->name, (*clkp)->rate); + __func__, (*clkp)->name, (*clkp)->rate); } local_clk_use(&ck_pll4); diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c index f7009d845be8..fe152e82590b 100644 --- a/arch/arm/mach-pnx4008/dma.c +++ b/arch/arm/mach-pnx4008/dma.c @@ -192,7 +192,7 @@ void pnx4008_free_channel(int ch) if (!dma_channels[ch].name) { printk(KERN_CRIT "%s: trying to free channel %d which is already freed\n", - __FUNCTION__, ch); + __func__, ch); return; } diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index 15c4e0df3e10..fcda7d5cb693 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -104,7 +104,7 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; - dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __FUNCTION__, slot, pin); + dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin); irq = it8152_pci_map_irq(dev, slot, pin); if (irq) diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 6012177a29a3..ecdbc96a4de1 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -504,11 +504,11 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd) struct pxamci_platform_data *p_d = dev->platform_data; if ((1 << vdd) & p_d->ocr_mask) { - printk(KERN_DEBUG "%s: on\n", __FUNCTION__); + printk(KERN_DEBUG "%s: on\n", __func__); GPCR(105) = GPIO_bit(105); } else { GPSR(105) = GPIO_bit(105); - printk(KERN_DEBUG "%s: off\n", __FUNCTION__); + printk(KERN_DEBUG "%s: off\n", __func__); } } diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c index 93c4f31f127f..3215316d7b06 100644 --- a/arch/arm/mach-pxa/dma.c +++ b/arch/arm/mach-pxa/dma.c @@ -81,7 +81,7 @@ void pxa_free_dma (int dma_ch) if (!dma_channels[dma_ch].name) { printk (KERN_CRIT "%s: trying to free channel %d which is already freed\n", - __FUNCTION__, dma_ch); + __func__, dma_ch); return; } diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 3d0ad5065ee5..3bb31314429a 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -264,7 +264,7 @@ static int em_x270_mci_init(struct device *dev, "MMC card detect", data); if (err) { printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n", - __FUNCTION__, err); + __func__, err); return err; } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 345c3deeb02e..72a436fb9a29 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -390,11 +390,11 @@ static void mainstone_mci_setpower(struct device *dev, unsigned int vdd) struct pxamci_platform_data* p_d = dev->platform_data; if (( 1 << vdd) & p_d->ocr_mask) { - printk(KERN_DEBUG "%s: on\n", __FUNCTION__); + printk(KERN_DEBUG "%s: on\n", __func__); MST_MSCWR1 |= MST_MSCWR1_MMC_ON; MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL; } else { - printk(KERN_DEBUG "%s: off\n", __FUNCTION__); + printk(KERN_DEBUG "%s: off\n", __func__); MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON; } } diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 853fc9433750..f207fcd30cd7 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -217,7 +217,7 @@ void board_pcmcia_power(int power) ConXS_BCR = trizeps_conxs_bcr; } - pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr); + pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr); } /* backlight power switching for LCD panel */ @@ -228,7 +228,7 @@ static void board_backlight_power(int on) } else { trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP; } - pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr); + pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr); ConXS_BCR = trizeps_conxs_bcr; } @@ -238,10 +238,10 @@ static void board_mci_power(struct device *dev, unsigned int vdd) struct pxamci_platform_data* p_d = dev->platform_data; if (( 1 << vdd) & p_d->ocr_mask) { - pr_debug("%s: on\n", __FUNCTION__); + pr_debug("%s: on\n", __func__); /* FIXME fill in values here */ } else { - pr_debug("%s: off\n", __FUNCTION__); + pr_debug("%s: off\n", __func__); /* FIXME fill in values here */ } } diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index f60b7a66dfa0..842d9e6dc5ff 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -206,7 +206,7 @@ static int __init badge4_init(void) if (ret < 0) printk(KERN_ERR "%s: SA-1111 initialization failed (%d)\n", - __FUNCTION__, ret); + __func__, ret); /* maybe turn on 5v0 from the start */ @@ -240,11 +240,11 @@ void badge4_set_5V(unsigned subsystem, int on) /* detect on->off and off->on transitions */ if ((!old_5V_bitmap) && (badge4_5V_bitmap)) { /* was off, now on */ - printk(KERN_INFO "%s: enabling 5V supply rail\n", __FUNCTION__); + printk(KERN_INFO "%s: enabling 5V supply rail\n", __func__); GPSR = BADGE4_GPIO_PCMEN5V; } else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) { /* was on, now off */ - printk(KERN_INFO "%s: disabling 5V supply rail\n", __FUNCTION__); + printk(KERN_INFO "%s: disabling 5V supply rail\n", __func__); GPCR = BADGE4_GPIO_PCMEN5V; } diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index d68630b74d78..343368aa82de 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -139,7 +139,7 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed) if (settings->speed == 0) { panic("%s: couldn't find dram setting for speed %d\n", - __FUNCTION__, new_speed); + __func__, new_speed); } /* No risk, no fun: run with interrupts on! */ diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c index 1fbe053e8b59..e5080286060e 100644 --- a/arch/arm/mach-sa1100/dma.c +++ b/arch/arm/mach-sa1100/dma.c @@ -129,7 +129,7 @@ int sa1100_request_dma (dma_device_t device, const char *device_id, if (err) { printk(KERN_ERR "%s: unable to request IRQ %d for %s\n", - __FUNCTION__, IRQ_DMA0 + i, device_id); + __func__, IRQ_DMA0 + i, device_id); dma->device = 0; return err; } @@ -165,12 +165,12 @@ void sa1100_free_dma(dma_regs_t *regs) if (regs == (dma_regs_t *)&DDAR(i)) break; if (i >= SA1100_DMA_CHANNELS) { - printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__); + printk(KERN_ERR "%s: bad DMA identifier\n", __func__); return; } if (!dma_chan[i].device) { - printk(KERN_ERR "%s: Trying to free free DMA\n", __FUNCTION__); + printk(KERN_ERR "%s: Trying to free free DMA\n", __func__); return; } @@ -329,7 +329,7 @@ void sa1100_reset_dma(dma_regs_t *regs) if (regs == (dma_regs_t *)&DDAR(i)) break; if (i >= SA1100_DMA_CHANNELS) { - printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__); + printk(KERN_ERR "%s: bad DMA identifier\n", __func__); return; } diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index b72fee0f2538..8473c37b77d6 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -596,7 +596,7 @@ static void h3800_control_egpio(enum ipaq_egpio_type x, int setp) case IPAQ_EGPIO_CODEC_NRESET: case IPAQ_EGPIO_AUDIO_ON: case IPAQ_EGPIO_QMUTE: - printk("%s: error - should not be called\n", __FUNCTION__); + printk("%s: error - should not be called\n", __func__); break; case IPAQ_EGPIO_OPT_NVRAM_ON: SET_ASIC2(GPIO2_OPT_ON_NVRAM); @@ -638,7 +638,7 @@ static int h3800_pm_callback(int req) static u16 asic2_data; int result = 0; - printk("%s %d\n", __FUNCTION__, req); + printk("%s %d\n", __func__, req); switch (req) { case PM_RESUME: @@ -666,7 +666,7 @@ static int h3800_pm_callback(int req) asic2_data = H3800_ASIC2_GPIOPIOD; break; default: - printk("%s: unrecognized PM callback\n", __FUNCTION__); + printk("%s: unrecognized PM callback\n", __func__); break; } return result; @@ -706,7 +706,7 @@ static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc) { int i; - if (0) printk("%s: interrupt received\n", __FUNCTION__); + if (0) printk("%s: interrupt received\n", __func__); desc->chip->ack(irq); @@ -716,21 +716,21 @@ static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc) /* KPIO */ irq = H3800_ASIC2_KPIINTFLAG; - if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq); + if (0) printk("%s KPIO 0x%08X\n", __func__, irq); for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++) if (irq & kpio_irq_mask[j]) handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j); /* GPIO2 */ irq = H3800_ASIC2_GPIINTFLAG; - if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq); + if (0) printk("%s GPIO 0x%08X\n", __func__, irq); for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++) if (irq & gpio_irq_mask[j]) handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j); } if (i >= MAX_ASIC_ISR_LOOPS) - printk("%s: interrupt processing overrun\n", __FUNCTION__); + printk("%s: interrupt processing overrun\n", __func__); /* For level-based interrupts */ desc->chip->unmask(irq); diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index 2b5aa1135b11..98d01517b563 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -371,7 +371,7 @@ static int __init iop3xx_init_atu_setup(char *str) default: printk(KERN_DEBUG "\"%s\" malformed at " "character: \'%c\'", - __FUNCTION__, + __func__, *str); *(str + 1) = '\0'; } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index a46676db8113..9255a4598c71 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -137,7 +137,7 @@ static void omap_disable_channel_irq(int lch); static inline void omap_enable_channel_irq(int lch); #define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \ - __FUNCTION__); + __func__); #ifdef CONFIG_ARCH_OMAP15XX /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ @@ -699,7 +699,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) u32 reg; if (!cpu_class_is_omap2()) { - printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __FUNCTION__); + printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); return; } diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index e719d0eeb5c8..302ad8dff2cb 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -268,7 +268,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) { spin_unlock_irqrestore(&dm_timer_lock, flags); printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n", - __FILE__, __LINE__, __FUNCTION__, id); + __FILE__, __LINE__, __func__, id); dump_stack(); return NULL; } diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index ac9ff1666fcc..60f162dc4fad 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -130,8 +130,8 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) dmadbg_dumpregs(fname, line, chan, &state); } -#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan)) -#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan)) +#define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan)) +#define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan)) #else #define dbg_showregs(chan) do { } while(0) #define dbg_showchan(chan) do { } while(0) @@ -403,7 +403,7 @@ static int s3c2410_dma_start(struct s3c2410_dma_chan *chan) if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { pr_debug("%s: buff not yet loaded, no more todo\n", - __FUNCTION__); + __func__); } else { chan->load_state = S3C2410_DMALOAD_1RUNNING; s3c2410_dma_loadbuffer(chan, chan->next); @@ -463,16 +463,16 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, return -EINVAL; pr_debug("%s: id=%p, data=%08x, size=%d\n", - __FUNCTION__, id, (unsigned int)data, size); + __func__, id, (unsigned int)data, size); buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); if (buf == NULL) { pr_debug("%s: out of memory (%ld alloc)\n", - __FUNCTION__, (long)sizeof(*buf)); + __func__, (long)sizeof(*buf)); return -ENOMEM; } - //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); + //pr_debug("%s: new buffer %p\n", __func__, buf); //dbg_showchan(chan); buf->next = NULL; @@ -486,18 +486,18 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, if (chan->curr == NULL) { /* we've got nothing loaded... */ pr_debug("%s: buffer %p queued onto empty channel\n", - __FUNCTION__, buf); + __func__, buf); chan->curr = buf; chan->end = buf; chan->next = NULL; } else { pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", - chan->number, __FUNCTION__, buf); + chan->number, __func__, buf); if (chan->end == NULL) pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", - chan->number, __FUNCTION__, chan); + chan->number, __func__, chan); chan->end->next = buf; chan->end = buf; @@ -572,7 +572,7 @@ s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", - chan->number, __FUNCTION__); + chan->number, __func__); return; } break; @@ -658,7 +658,7 @@ s3c2410_dma_irq(int irq, void *devpw) if (buf->magic != BUF_MAGIC) { printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n", - chan->number, __FUNCTION__, buf); + chan->number, __func__, buf); return IRQ_HANDLED; } @@ -692,7 +692,7 @@ s3c2410_dma_irq(int irq, void *devpw) if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", - chan->number, __FUNCTION__); + chan->number, __func__); return IRQ_HANDLED; } @@ -759,7 +759,7 @@ int s3c2410_dma_request(unsigned int channel, if (!chan->irq_claimed) { pr_debug("dma%d: %s : requesting irq %d\n", - channel, __FUNCTION__, chan->irq); + channel, __func__, chan->irq); chan->irq_claimed = 1; local_irq_restore(flags); @@ -786,7 +786,7 @@ int s3c2410_dma_request(unsigned int channel, /* need to setup */ - pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan); + pr_debug("%s: channel initialised, %p\n", __func__, chan); return chan->number | DMACH_LOW_LEVEL; } @@ -823,7 +823,7 @@ int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) if (chan->state != S3C2410_DMA_IDLE) { pr_debug("%s: need to stop dma channel %p\n", - __FUNCTION__, chan); + __func__, chan); /* possibly flush the channel */ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP); @@ -852,7 +852,7 @@ static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) unsigned long flags; unsigned long tmp; - pr_debug("%s:\n", __FUNCTION__); + pr_debug("%s:\n", __func__); dbg_showchan(chan); @@ -907,14 +907,14 @@ static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan) struct s3c2410_dma_buf *buf, *next; unsigned long flags; - pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number); + pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number); dbg_showchan(chan); local_irq_save(flags); if (chan->state != S3C2410_DMA_IDLE) { - pr_debug("%s: stopping channel...\n", __FUNCTION__ ); + pr_debug("%s: stopping channel...\n", __func__ ); s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); } @@ -929,7 +929,7 @@ static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan) next = buf->next; pr_debug("%s: free buffer %p, next %p\n", - __FUNCTION__, buf, buf->next); + __func__, buf, buf->next); s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT); s3c2410_dma_freebuf(buf); @@ -976,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { pr_debug("%s: buff not yet loaded, no more todo\n", - __FUNCTION__); + __func__); } else { chan->load_state = S3C2410_DMALOAD_1RUNNING; s3c2410_dma_loadbuffer(chan, chan->next); @@ -1050,16 +1050,16 @@ int s3c2410_dma_config(dmach_t channel, struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", - __FUNCTION__, channel, xferunit, dcon); + __func__, channel, xferunit, dcon); if (chan == NULL) return -EINVAL; - pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon); + pr_debug("%s: Initial dcon is %08x\n", __func__, dcon); dcon |= chan->dcon & dma_sel.dcon_mask; - pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon); + pr_debug("%s: New dcon is %08x\n", __func__, dcon); switch (xferunit) { case 1: @@ -1075,14 +1075,14 @@ int s3c2410_dma_config(dmach_t channel, break; default: - pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit); + pr_debug("%s: bad transfer size %d\n", __func__, xferunit); return -EINVAL; } dcon |= S3C2410_DCON_HWTRIG; dcon |= S3C2410_DCON_INTREQ; - pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon); + pr_debug("%s: dcon now %08x\n", __func__, dcon); chan->dcon = dcon; chan->xfer_unit = xferunit; @@ -1099,7 +1099,7 @@ int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) if (chan == NULL) return -EINVAL; - pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); + pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags); chan->flags = flags; @@ -1120,7 +1120,7 @@ int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) if (chan == NULL) return -EINVAL; - pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); + pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn); chan->op_fn = rtn; @@ -1136,7 +1136,7 @@ int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) if (chan == NULL) return -EINVAL; - pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); + pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn); chan->callback_fn = rtn; @@ -1170,7 +1170,7 @@ int s3c2410_dma_devconfig(int channel, return -EINVAL; pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", - __FUNCTION__, (int)source, hwcfg, devaddr); + __func__, (int)source, hwcfg, devaddr); chan->source = source; chan->dev_addr = devaddr; @@ -1180,7 +1180,7 @@ int s3c2410_dma_devconfig(int channel, case S3C2410_DMASRC_HW: /* source is hardware */ pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n", - __FUNCTION__, devaddr, hwcfg); + __func__, devaddr, hwcfg); dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3); dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr); dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0)); @@ -1190,8 +1190,8 @@ int s3c2410_dma_devconfig(int channel, case S3C2410_DMASRC_MEM: /* source is memory */ - pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n", - __FUNCTION__, devaddr, hwcfg); + pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n", + __func__, devaddr, hwcfg); dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0)); dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr); dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3); -- cgit v1.2.2 From 6bb68f8867348257e757de9c30ada4e90fe695d9 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 4 Mar 2008 15:08:02 -0800 Subject: [ARM] AT91: correct at91sam9263ek LCD power gpio pin Correct GPIO pin assignment for the LCD power control (PCI) Signed-off-by: Nicolas Ferre Cc: David Brownell Cc: Andrew Victor Signed-off-by: Andrew Morton Signed-off-by: Russell King --- arch/arm/mach-at91/board-sam9263ek.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 38313abef657..bf103b24c937 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -245,10 +245,7 @@ static struct fb_monspecs at91fb_default_monspecs = { static void at91_lcdc_power_control(int on) { - if (on) - at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */ - else - at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */ + at91_set_gpio_value(AT91_PIN_PA30, on); } /* Driver datas */ -- cgit v1.2.2 From 28b958859206b7010d03129611c2e444898e3ee4 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 6 Mar 2008 18:42:26 +0800 Subject: [POWERPC] 83xx: Fix wrong USB phy type in mpc837xmds dts Due to chip constraint MPC837x USB DR module can only use ULPI and serial PHY interfaces. The patch fixes the wrong type in dts. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8377_mds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8378_mds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8379_mds.dts | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index a3637fff73cc..677a0615eb00 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -91,7 +91,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +98,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 533e9b06cc8f..3f9e9fe4b5aa 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -91,7 +91,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +98,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index c270685bbde4..36c1c13f0517 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -91,7 +91,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -99,7 +98,8 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi_wide"; + dr_mode = "host"; + phy_type = "ulpi"; }; mdio@24520 { -- cgit v1.2.2 From d7f46190ef1048e48f71c8a7a60c2881c437d08d Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 6 Mar 2008 18:42:35 +0800 Subject: [POWERPC] 83xx: Add local bus device nodes to MPC837xMDS device trees. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8377_mds.dts | 66 +++++++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8378_mds.dts | 66 +++++++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8379_mds.dts | 66 +++++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/mpc837x_mds.c | 8 ++-- 4 files changed, 201 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 677a0615eb00..49c05e97386c 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 3f9e9fe4b5aa..1d6ea080ad73 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 36c1c13f0517..fdb4a9255b24 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -47,6 +47,72 @@ reg = <0x00000000 0x20000000>; // 512MB at 0 }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index 8a9c26973605..64d17b0d6455 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -39,12 +39,9 @@ static int mpc837xmds_usb_cfg(void) if (ret) return ret; /* Map BCSR area */ - np = of_find_node_by_name(NULL, "bcsr"); + np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr"); if (np) { - struct resource res; - - of_address_to_resource(np, 0, &res); - bcsr_regs = ioremap(res.start, res.end - res.start + 1); + bcsr_regs = of_iomap(np, 0); of_node_put(np); } if (!bcsr_regs) @@ -96,6 +93,7 @@ static void __init mpc837x_mds_setup_arch(void) static struct of_device_id mpc837x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; -- cgit v1.2.2 From 76db5bd26f2d79712459bf80ce0e5c0c5c31b769 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Thu, 6 Mar 2008 13:53:30 +0300 Subject: [POWERPC] 8xx: fix swap This makes swap routines operate correctly on the ppc_8xx based machines. Code has been revalidated on mpc885ads (8M sdram) with recent kernel. Based on patch from Yuri Tikhonov to do the same on arch/ppc instance. Recent kernel's size makes swap feature very important on low-memory platforms, those are actually non-operable without it. Signed-off-by: Yuri Tikhonov Signed-off-by: Vitaly Bordug Signed-off-by: Kumar Gala --- arch/powerpc/kernel/head_8xx.S | 30 +++++++++++++++++++++++++++++- include/asm-powerpc/pgtable-ppc32.h | 8 -------- 2 files changed, 29 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index f7458396cd7c..3c9452d4308b 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -332,8 +332,18 @@ InstructionTLBMiss: mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ lwz r10, 0(r11) /* Get the pte */ +#ifdef CONFIG_SWAP + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f + ori r10, r10, _PAGE_ACCESSED + mfspr r11, SPRN_MD_TWC /* get the pte address again */ + stw r10, 0(r11) +4: +#else ori r10, r10, _PAGE_ACCESSED stw r10, 0(r11) +#endif /* The Linux PTE won't go exactly into the MMU TLB. * Software indicator bits 21, 22 and 28 must be clear. @@ -398,8 +408,17 @@ DataStoreTLBMiss: DO_8xx_CPU6(0x3b80, r3) mtspr SPRN_MD_TWC, r11 - mfspr r11, SPRN_MD_TWC /* get the pte address again */ +#ifdef CONFIG_SWAP + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f ori r10, r10, _PAGE_ACCESSED +4: + /* and update pte in table */ +#else + ori r10, r10, _PAGE_ACCESSED +#endif + mfspr r11, SPRN_MD_TWC /* get the pte address again */ stw r10, 0(r11) /* The Linux PTE won't go exactly into the MMU TLB. @@ -507,7 +526,16 @@ DataTLBError: /* Update 'changed', among others. */ +#ifdef CONFIG_SWAP + ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f + ori r10, r10, _PAGE_ACCESSED +4: +#else ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE +#endif mfspr r11, SPRN_MD_TWC /* Get pte address again */ stw r10, 0(r11) /* and update pte in table */ diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index d1332bbcbd9b..2c79f550272b 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -339,14 +339,6 @@ extern int icache_44x_need_flush; #define _PMD_PAGE_MASK 0x000c #define _PMD_PAGE_8M 0x000c -/* - * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE - * for an address even if _PAGE_PRESENT is not set, as a performance - * optimization. This is a bug if you ever want to use swap unless - * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific - * definitions for __swp_entry etc. below, which would be gross. - * -- paulus - */ #define _PTE_NONE_MASK _PAGE_ACCESSED #else /* CONFIG_6xx */ -- cgit v1.2.2 From a55387e5ad903dec4e281907e4d8e74679ae60e2 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 20 Feb 2008 12:33:38 -0600 Subject: [POWERPC] 8xx: Fix wrapper platform for adder875, and combine defconfigs. This fixes the following bug: http://ozlabs.org/pipermail/linuxppc-dev/2008-February/051979.html Separate defconfigs are no longer needed now that CONFIG_DEVICE_TREE is gone. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/boot/wrapper | 6 +- arch/powerpc/configs/adder875-redboot_defconfig | 798 ----------------------- arch/powerpc/configs/adder875-uboot_defconfig | 798 ----------------------- arch/powerpc/configs/adder875_defconfig | 813 ++++++++++++++++++++++++ 4 files changed, 818 insertions(+), 1597 deletions(-) delete mode 100644 arch/powerpc/configs/adder875-redboot_defconfig delete mode 100644 arch/powerpc/configs/adder875-uboot_defconfig create mode 100644 arch/powerpc/configs/adder875_defconfig diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index c3178155311b..d50e498a072b 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -191,10 +191,14 @@ ps3) ksection=.kernel:vmlinux.bin isection=.kernel:initrd ;; -ep88xc|ep405|redboot*|ep8248e) +ep88xc|ep405|ep8248e) platformo="$object/fixed-head.o $object/$platform.o" binary=y ;; +adder875-redboot) + platformo="$object/fixed-head.o $object/redboot-8xx.o" + binary=y + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" diff --git a/arch/powerpc/configs/adder875-redboot_defconfig b/arch/powerpc/configs/adder875-redboot_defconfig deleted file mode 100644 index cab5f9b64567..000000000000 --- a/arch/powerpc/configs/adder875-redboot_defconfig +++ /dev/null @@ -1,798 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Thu Jan 17 16:17:38 2008 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -# CONFIG_PPC_85xx is not set -CONFIG_PPC_8xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_8xx=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_NOT_COHERENT_CACHE=y -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_IRQ_PER_CPU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set -CONFIG_REDBOOT=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=1 -# CONFIG_MODULES is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -CONFIG_DEFAULT_DEADLINE=y -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="deadline" - -# -# Platform support -# -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -CONFIG_CPM1=y -# CONFIG_MPC8XXFADS is not set -# CONFIG_MPC86XADS is not set -# CONFIG_MPC885ADS is not set -# CONFIG_PPC_EP88XC is not set -CONFIG_PPC_ADDER875=y - -# -# MPC8xx CPM Options -# - -# -# Generic MPC8xx Options -# -CONFIG_8xx_COPYBACK=y -# CONFIG_8xx_CPU6 is not set -CONFIG_8xx_CPU15=y -CONFIG_NO_UCODE_PATCH=y -# CONFIG_USB_SOF_UCODE_PATCH is not set -# CONFIG_I2C_SPI_UCODE_PATCH is not set -# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set -# CONFIG_PQ2ADS is not set -# CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set -CONFIG_PPC_CPM_NEW_BINDING=y -# CONFIG_FSL_ULI1575 is not set -CONFIG_CPM=y - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -CONFIG_HZ_1000=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_8XX_MINIMAL_FPEMU is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -# CONFIG_PROC_DEVICETREE is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y -# CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="adder875-redboot.dts" -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_PCI_QSPAN is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_CFI_FLAGADM is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -CONFIG_OF_DEVICE=y -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -CONFIG_DAVICOM_PHY=y -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -CONFIG_FS_ENET=y -# CONFIG_FS_ENET_HAS_SCC is not set -CONFIG_FS_ENET_HAS_FEC=y -CONFIG_FS_ENET_MDIO_FEC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set -# CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set -# CONFIG_PPC_CLOCK is not set -CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/adder875-uboot_defconfig b/arch/powerpc/configs/adder875-uboot_defconfig deleted file mode 100644 index 1faf7ef59a23..000000000000 --- a/arch/powerpc/configs/adder875-uboot_defconfig +++ /dev/null @@ -1,798 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc6 -# Thu Jan 17 16:17:18 2008 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -# CONFIG_PPC_85xx is not set -CONFIG_PPC_8xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_8xx=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_NOT_COHERENT_CACHE=y -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_IRQ_PER_CPU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -# CONFIG_DEFAULT_UIMAGE is not set -CONFIG_REDBOOT=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=1 -# CONFIG_MODULES is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -CONFIG_DEFAULT_DEADLINE=y -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="deadline" - -# -# Platform support -# -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -CONFIG_CPM1=y -# CONFIG_MPC8XXFADS is not set -# CONFIG_MPC86XADS is not set -# CONFIG_MPC885ADS is not set -# CONFIG_PPC_EP88XC is not set -CONFIG_PPC_ADDER875=y - -# -# MPC8xx CPM Options -# - -# -# Generic MPC8xx Options -# -CONFIG_8xx_COPYBACK=y -# CONFIG_8xx_CPU6 is not set -CONFIG_8xx_CPU15=y -CONFIG_NO_UCODE_PATCH=y -# CONFIG_USB_SOF_UCODE_PATCH is not set -# CONFIG_I2C_SPI_UCODE_PATCH is not set -# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set -# CONFIG_PQ2ADS is not set -# CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set -CONFIG_PPC_CPM_NEW_BINDING=y -# CONFIG_FSL_ULI1575 is not set -CONFIG_CPM=y - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -CONFIG_HZ_1000=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_8XX_MINIMAL_FPEMU is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -# CONFIG_PROC_DEVICETREE is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -CONFIG_HIBERNATION_UP_POSSIBLE=y -# CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y -CONFIG_DEVICE_TREE="adder875-uboot.dts" -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_PCI_QSPAN is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_CFI_FLAGADM is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -CONFIG_OF_DEVICE=y -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -CONFIG_DAVICOM_PHY=y -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -CONFIG_FS_ENET=y -# CONFIG_FS_ENET_HAS_SCC is not set -CONFIG_FS_ENET_HAS_FEC=y -CONFIG_FS_ENET_MDIO_FEC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set -# CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_SAMPLES is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set -# CONFIG_PPC_CLOCK is not set -CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig new file mode 100644 index 000000000000..a3cc94a2ff06 --- /dev/null +++ b/arch/powerpc/configs/adder875_defconfig @@ -0,0 +1,813 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc2 +# Wed Feb 20 12:26:07 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +CONFIG_PPC_8xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_8xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_REDBOOT=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set + +# +# Platform support +# +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +CONFIG_CPM1=y +# CONFIG_MPC8XXFADS is not set +# CONFIG_MPC86XADS is not set +# CONFIG_MPC885ADS is not set +# CONFIG_PPC_EP88XC is not set +CONFIG_PPC_ADDER875=y + +# +# MPC8xx CPM Options +# + +# +# Generic MPC8xx Options +# +CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_CPU6 is not set +CONFIG_8xx_CPU15=y +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set +# CONFIG_PQ2ADS is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +CONFIG_PPC_CPM_NEW_BINDING=y +# CONFIG_FSL_ULI1575 is not set +CONFIG_CPM=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_8XX_MINIMAL_FPEMU is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_PCI_QSPAN is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xfd000000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_CFI_FLAGADM is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FEC=y +CONFIG_FS_ENET_MDIO_FEC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +CONFIG_SERIAL_CPM_SMC2=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_LIB_RHEAP=y -- cgit v1.2.2 From 6f913160fa8e8de5ea2746a2f6b1d65c67e092b0 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 3 Mar 2008 11:11:30 -0600 Subject: [POWERPC] QE: Fix QE firmware uploading limit Fix a typo in qe_upload_firmware() that prevented uploading firmware on systems with more than one RISC core. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/qe_lib/qe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 6efbd5e5bb1b..f963fbf21ef0 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -509,7 +509,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware) } /* Validate some of the fields */ - if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) { + if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) { printk(KERN_ERR "qe-firmware: invalid data\n"); return -EINVAL; } -- cgit v1.2.2 From 951b62c11e86acf8c55d9828aa8c921575023c29 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 5 Oct 2007 15:57:06 -0400 Subject: [SCSI] advansys: Fix bug in AdvLoadMicrocode buf[i] can be up to 0xfd, so doubling it and assigning the result to an unsigned char truncates the value. Just use an unsigned int instead; it's only a temporary. Signed-off-by: Matthew Wilcox Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/advansys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 3c2d6888bb8c..8591585e5cc5 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -6439,7 +6439,7 @@ static int AdvLoadMicrocode(AdvPortAddr iop_base, unsigned char *buf, int size, i += 2; len += 2; } else { - unsigned char off = buf[i] * 2; + unsigned int off = buf[i] * 2; unsigned short word = (buf[off + 1] << 8) | buf[off]; AdvWriteWordAutoIncLram(iop_base, word); len += 2; -- cgit v1.2.2 From e9720acd728a46cb40daa52c99a979f7c4ff195c Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Fri, 7 Mar 2008 11:08:40 -0800 Subject: [NET]: Make /proc/net a symlink on /proc/self/net (v3) Current /proc/net is done with so called "shadows", but current implementation is broken and has little chances to get fixed. The problem is that dentries subtree of /proc/net directory has fancy revalidation rules to make processes living in different net namespaces see different entries in /proc/net subtree, but currently, tasks see in the /proc/net subdir the contents of any other namespace, depending on who opened the file first. The proposed fix is to turn /proc/net into a symlink, which points to /proc/self/net, which in turn shows what previously was in /proc/net - the network-related info, from the net namespace the appropriate task lives in. # ls -l /proc/net lrwxrwxrwx 1 root root 8 Mar 5 15:17 /proc/net -> self/net In other words - this behaves like /proc/mounts, but unlike "mounts", "net" is not a file, but a directory. Changes from v2: * Fixed discrepancy of /proc/net nlink count and selinux labeling screwup pointed out by Stephen. To get the correct nlink count the ->getattr callback for /proc/net is overridden to read one from the net->proc_net entry. To make selinux still work the net->proc_net entry is initialized properly, i.e. with the "net" name and the proc_net parent. Selinux fixes are Acked-by: Stephen Smalley Changes from v1: * Fixed a task_struct leak in get_proc_task_net, pointed out by Paul. Signed-off-by: Pavel Emelyanov Acked-by: "Eric W. Biederman" Signed-off-by: David S. Miller --- fs/proc/base.c | 1 + fs/proc/generic.c | 26 ++++++---- fs/proc/internal.h | 7 +++ fs/proc/proc_net.c | 117 +++++++++++++++++++++++++++++++++----------- include/linux/proc_fs.h | 3 -- include/net/net_namespace.h | 1 - 6 files changed, 114 insertions(+), 41 deletions(-) diff --git a/fs/proc/base.c b/fs/proc/base.c index 96ee899d6502..cc43cf0c1fa5 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2274,6 +2274,7 @@ static const struct pid_entry tgid_base_stuff[] = { DIR("task", S_IRUGO|S_IXUGO, task), DIR("fd", S_IRUSR|S_IXUSR, fd), DIR("fdinfo", S_IRUSR|S_IXUSR, fdinfo), + DIR("net", S_IRUGO|S_IXUSR, net), REG("environ", S_IRUSR, environ), INF("auxv", S_IRUSR, pid_auxv), ONE("status", S_IRUGO, pid_status), diff --git a/fs/proc/generic.c b/fs/proc/generic.c index 68971e66cd41..a36ad3c75cf4 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -377,15 +377,14 @@ static struct dentry_operations proc_dentry_operations = * Don't create negative dentries here, return -ENOENT by hand * instead. */ -struct dentry *proc_lookup(struct inode * dir, struct dentry *dentry, struct nameidata *nd) +struct dentry *proc_lookup_de(struct proc_dir_entry *de, struct inode *dir, + struct dentry *dentry) { struct inode *inode = NULL; - struct proc_dir_entry * de; int error = -ENOENT; lock_kernel(); spin_lock(&proc_subdir_lock); - de = PDE(dir); if (de) { for (de = de->subdir; de ; de = de->next) { if (de->namelen != dentry->d_name.len) @@ -393,8 +392,6 @@ struct dentry *proc_lookup(struct inode * dir, struct dentry *dentry, struct nam if (!memcmp(dentry->d_name.name, de->name, de->namelen)) { unsigned int ino; - if (de->shadow_proc) - de = de->shadow_proc(current, de); ino = de->low_ino; de_get(de); spin_unlock(&proc_subdir_lock); @@ -417,6 +414,12 @@ out_unlock: return ERR_PTR(error); } +struct dentry *proc_lookup(struct inode *dir, struct dentry *dentry, + struct nameidata *nd) +{ + return proc_lookup_de(PDE(dir), dir, dentry); +} + /* * This returns non-zero if at EOF, so that the /proc * root directory can use this and check if it should @@ -426,10 +429,9 @@ out_unlock: * value of the readdir() call, as long as it's non-negative * for success.. */ -int proc_readdir(struct file * filp, - void * dirent, filldir_t filldir) +int proc_readdir_de(struct proc_dir_entry *de, struct file *filp, void *dirent, + filldir_t filldir) { - struct proc_dir_entry * de; unsigned int ino; int i; struct inode *inode = filp->f_path.dentry->d_inode; @@ -438,7 +440,6 @@ int proc_readdir(struct file * filp, lock_kernel(); ino = inode->i_ino; - de = PDE(inode); if (!de) { ret = -EINVAL; goto out; @@ -499,6 +500,13 @@ out: unlock_kernel(); return ret; } +int proc_readdir(struct file *filp, void *dirent, filldir_t filldir) +{ + struct inode *inode = filp->f_path.dentry->d_inode; + + return proc_readdir_de(PDE(inode), filp, dirent, filldir); +} + /* * These are the generic /proc directory operations. They * use the in-memory "struct proc_dir_entry" tree to parse diff --git a/fs/proc/internal.h b/fs/proc/internal.h index 1c81c8f1aeed..bc72f5c8c47d 100644 --- a/fs/proc/internal.h +++ b/fs/proc/internal.h @@ -64,6 +64,8 @@ extern const struct file_operations proc_numa_maps_operations; extern const struct file_operations proc_smaps_operations; extern const struct file_operations proc_clear_refs_operations; extern const struct file_operations proc_pagemap_operations; +extern const struct file_operations proc_net_operations; +extern const struct inode_operations proc_net_inode_operations; void free_proc_entry(struct proc_dir_entry *de); @@ -83,3 +85,8 @@ static inline int proc_fd(struct inode *inode) { return PROC_I(inode)->fd; } + +struct dentry *proc_lookup_de(struct proc_dir_entry *de, struct inode *ino, + struct dentry *dentry); +int proc_readdir_de(struct proc_dir_entry *de, struct file *filp, void *dirent, + filldir_t filldir); diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c index 14e9b5aaf863..4caa5f774fb7 100644 --- a/fs/proc/proc_net.c +++ b/fs/proc/proc_net.c @@ -63,6 +63,82 @@ int seq_release_net(struct inode *ino, struct file *f) } EXPORT_SYMBOL_GPL(seq_release_net); +static struct net *get_proc_task_net(struct inode *dir) +{ + struct task_struct *task; + struct nsproxy *ns; + struct net *net = NULL; + + rcu_read_lock(); + task = pid_task(proc_pid(dir), PIDTYPE_PID); + if (task != NULL) { + ns = task_nsproxy(task); + if (ns != NULL) + net = get_net(ns->net_ns); + } + rcu_read_unlock(); + + return net; +} + +static struct dentry *proc_tgid_net_lookup(struct inode *dir, + struct dentry *dentry, struct nameidata *nd) +{ + struct dentry *de; + struct net *net; + + de = ERR_PTR(-ENOENT); + net = get_proc_task_net(dir); + if (net != NULL) { + de = proc_lookup_de(net->proc_net, dir, dentry); + put_net(net); + } + return de; +} + +static int proc_tgid_net_getattr(struct vfsmount *mnt, struct dentry *dentry, + struct kstat *stat) +{ + struct inode *inode = dentry->d_inode; + struct net *net; + + net = get_proc_task_net(inode); + + generic_fillattr(inode, stat); + + if (net != NULL) { + stat->nlink = net->proc_net->nlink; + put_net(net); + } + + return 0; +} + +const struct inode_operations proc_net_inode_operations = { + .lookup = proc_tgid_net_lookup, + .getattr = proc_tgid_net_getattr, +}; + +static int proc_tgid_net_readdir(struct file *filp, void *dirent, + filldir_t filldir) +{ + int ret; + struct net *net; + + ret = -EINVAL; + net = get_proc_task_net(filp->f_path.dentry->d_inode); + if (net != NULL) { + ret = proc_readdir_de(net->proc_net, filp, dirent, filldir); + put_net(net); + } + return ret; +} + +const struct file_operations proc_net_operations = { + .read = generic_read_dir, + .readdir = proc_tgid_net_readdir, +}; + struct proc_dir_entry *proc_net_fops_create(struct net *net, const char *name, mode_t mode, const struct file_operations *fops) @@ -83,14 +159,6 @@ struct net *get_proc_net(const struct inode *inode) } EXPORT_SYMBOL_GPL(get_proc_net); -static struct proc_dir_entry *shadow_pde; - -static struct proc_dir_entry *proc_net_shadow(struct task_struct *task, - struct proc_dir_entry *de) -{ - return task->nsproxy->net_ns->proc_net; -} - struct proc_dir_entry *proc_net_mkdir(struct net *net, const char *name, struct proc_dir_entry *parent) { @@ -104,45 +172,39 @@ EXPORT_SYMBOL_GPL(proc_net_mkdir); static __net_init int proc_net_ns_init(struct net *net) { - struct proc_dir_entry *root, *netd, *net_statd; + struct proc_dir_entry *netd, *net_statd; int err; err = -ENOMEM; - root = kzalloc(sizeof(*root), GFP_KERNEL); - if (!root) + netd = kzalloc(sizeof(*netd), GFP_KERNEL); + if (!netd) goto out; - err = -EEXIST; - netd = proc_net_mkdir(net, "net", root); - if (!netd) - goto free_root; + netd->data = net; + netd->nlink = 2; + netd->name = "net"; + netd->namelen = 3; + netd->parent = &proc_root; err = -EEXIST; net_statd = proc_net_mkdir(net, "stat", netd); if (!net_statd) goto free_net; - root->data = net; - - net->proc_net_root = root; net->proc_net = netd; net->proc_net_stat = net_statd; - err = 0; + return 0; +free_net: + kfree(netd); out: return err; -free_net: - remove_proc_entry("net", root); -free_root: - kfree(root); - goto out; } static __net_exit void proc_net_ns_exit(struct net *net) { remove_proc_entry("stat", net->proc_net); - remove_proc_entry("net", net->proc_net_root); - kfree(net->proc_net_root); + kfree(net->proc_net); } static struct pernet_operations __net_initdata proc_net_ns_ops = { @@ -152,8 +214,7 @@ static struct pernet_operations __net_initdata proc_net_ns_ops = { int __init proc_net_init(void) { - shadow_pde = proc_mkdir("net", NULL); - shadow_pde->shadow_proc = proc_net_shadow; + proc_symlink("net", NULL, "self/net"); return register_pernet_subsys(&proc_net_ns_ops); } diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index d9a9e718ad19..9b6c935f69cf 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -50,8 +50,6 @@ typedef int (read_proc_t)(char *page, char **start, off_t off, typedef int (write_proc_t)(struct file *file, const char __user *buffer, unsigned long count, void *data); typedef int (get_info_t)(char *, char **, off_t, int); -typedef struct proc_dir_entry *(shadow_proc_t)(struct task_struct *task, - struct proc_dir_entry *pde); struct proc_dir_entry { unsigned int low_ino; @@ -82,7 +80,6 @@ struct proc_dir_entry { int pde_users; /* number of callers into module in progress */ spinlock_t pde_unload_lock; /* proc_fops checks and pde_users bumps */ struct completion *pde_unload_completion; - shadow_proc_t *shadow_proc; }; struct kcore_list { diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 28738b7d53eb..923f2b8b9096 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -31,7 +31,6 @@ struct net { struct proc_dir_entry *proc_net; struct proc_dir_entry *proc_net_stat; - struct proc_dir_entry *proc_net_root; struct list_head sysctl_table_headers; -- cgit v1.2.2 From e621e69137b24fdbbe7ad28214e8d81e614c25b7 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Fri, 7 Mar 2008 11:11:13 -0800 Subject: [NET]: include into linux/ethtool.h for __u* typedef Signed-off-by: Kirill A. Shutemov Signed-off-by: David S. Miller --- include/linux/ethtool.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index fcbe8b640ffb..c8d216357865 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -12,6 +12,7 @@ #ifndef _LINUX_ETHTOOL_H #define _LINUX_ETHTOOL_H +#include /* This should work for both 32 and 64 bit userland. */ struct ethtool_cmd { -- cgit v1.2.2 From 3e0d65bf6d5b464949b749a8da7977f6b197d301 Mon Sep 17 00:00:00 2001 From: Jeremy McNicoll Date: Fri, 7 Mar 2008 15:14:09 -0500 Subject: [POWERPC] 85xx: sbc8548 - Fix incorrect PCI-X and PCI interrupt map The following patch allows interrupts to occur on the sbc8548. Currently PCI and PCI-X devices get assigned an IRQ but the interrupt count never increases. This solves the problem and adds PCI support as well. Signed-off-by: Jeremy McNicoll Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8548.dts | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 14be38ad5d4b..b86e65d926c1 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -184,11 +184,17 @@ cell-index = <0>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < - /* IDSEL 0x01 (PCI-X slot) */ - 0x0800 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x0800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x0800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>; + /* IDSEL 0x01 (PCI-X slot) @66MHz */ + 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; interrupts = <0x18 0x2>; -- cgit v1.2.2 From 1757f2d12dce775982aaa006bce1cf4f7ce90111 Mon Sep 17 00:00:00 2001 From: Yuri Tikhonov Date: Sat, 2 Feb 2008 10:47:31 +0300 Subject: [PPC] 8xx: swap bug-fix This makes swap routines operate correctly on the ppc_8xx based machines. Recent kernel's size makes swap feature very important on low-memory platfor those are actually non-operable without it. Signed-off-by: Yuri Tikhonov Signed-off-by: Kumar Gala --- arch/ppc/kernel/head_8xx.S | 30 +++++++++++++++++++++++++++++- include/asm-ppc/pgtable.h | 8 -------- 2 files changed, 29 insertions(+), 9 deletions(-) diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S index eb8d26f87362..321bda2de2cb 100644 --- a/arch/ppc/kernel/head_8xx.S +++ b/arch/ppc/kernel/head_8xx.S @@ -329,8 +329,18 @@ InstructionTLBMiss: mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ lwz r10, 0(r11) /* Get the pte */ +#ifdef CONFIG_SWAP + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f + ori r10, r10, _PAGE_ACCESSED + mfspr r11, SPRN_MD_TWC /* get the pte address again */ + stw r10, 0(r11) +4: +#else ori r10, r10, _PAGE_ACCESSED stw r10, 0(r11) +#endif /* The Linux PTE won't go exactly into the MMU TLB. * Software indicator bits 21, 22 and 28 must be clear. @@ -395,8 +405,17 @@ DataStoreTLBMiss: DO_8xx_CPU6(0x3b80, r3) mtspr SPRN_MD_TWC, r11 - mfspr r11, SPRN_MD_TWC /* get the pte address again */ +#ifdef CONFIG_SWAP + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f + ori r10, r10, _PAGE_ACCESSED +4: + /* and update pte in table */ +#else ori r10, r10, _PAGE_ACCESSED +#endif + mfspr r11, SPRN_MD_TWC /* get the pte address again */ stw r10, 0(r11) /* The Linux PTE won't go exactly into the MMU TLB. @@ -575,7 +594,16 @@ DataTLBError: /* Update 'changed', among others. */ +#ifdef CONFIG_SWAP + ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE + /* do not set the _PAGE_ACCESSED bit of a non-present page */ + andi. r11, r10, _PAGE_PRESENT + beq 4f + ori r10, r10, _PAGE_ACCESSED +4: +#else ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE +#endif mfspr r11, SPRN_MD_TWC /* Get pte address again */ stw r10, 0(r11) /* and update pte in table */ diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h index 69347bdbb401..70435d32129a 100644 --- a/include/asm-ppc/pgtable.h +++ b/include/asm-ppc/pgtable.h @@ -299,14 +299,6 @@ extern unsigned long ioremap_bot, ioremap_base; #define _PMD_PAGE_MASK 0x000c #define _PMD_PAGE_8M 0x000c -/* - * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE - * for an address even if _PAGE_PRESENT is not set, as a performance - * optimization. This is a bug if you ever want to use swap unless - * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific - * definitions for __swp_entry etc. below, which would be gross. - * -- paulus - */ #define _PTE_NONE_MASK _PAGE_ACCESSED #else /* CONFIG_6xx */ -- cgit v1.2.2 From ac5bbf21bf38b3f5eaa8cb1e17f7513dc354afda Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 6 Mar 2008 16:21:42 +0100 Subject: [ARM] 4851/1: ns9xxx: fix size of gpiores MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GPIO_MAX is the number of the last gpio, not the number of gpios. So the bitmap must provide GPIO_MAX + 1 bits. Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c index b2230213b983..5286e9fc1d30 100644 --- a/arch/arm/mach-ns9xxx/gpio.c +++ b/arch/arm/mach-ns9xxx/gpio.c @@ -31,7 +31,7 @@ static spinlock_t gpio_lock = __SPIN_LOCK_UNLOCKED(gpio_lock); /* only access gpiores with atomic ops */ -static DECLARE_BITMAP(gpiores, GPIO_MAX); +static DECLARE_BITMAP(gpiores, GPIO_MAX + 1); static inline int ns9xxx_valid_gpio(unsigned gpio) { -- cgit v1.2.2 From a4f14bace8ddf0cc26fc2d658b6dd37c71178770 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 6 Mar 2008 16:22:17 +0100 Subject: [ARM] 4853/1: include uImage target in make help MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7b8ff66febe1..1a4649667ec8 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -251,6 +251,7 @@ define archhelp echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)' + echo ' uImage - U-Boot wrapped zImage' echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=)' echo ' install - Install uncompressed kernel' -- cgit v1.2.2 From 88603f1dc1bf414dc21a0361693d1270231a6c59 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 7 Mar 2008 11:41:18 +0100 Subject: [ARM] 4855/1: Orion: use correct ethernet unit address range Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-orion/common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c index 2d6d413f0235..bbc2b4ec932c 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion/common.c @@ -179,8 +179,8 @@ static struct platform_device orion_ehci1 = { static struct resource orion_eth_shared_resources[] = { { - .start = ORION_ETH_PHYS_BASE, - .end = ORION_ETH_PHYS_BASE + 0xffff, + .start = ORION_ETH_PHYS_BASE + 0x2000, + .end = ORION_ETH_PHYS_BASE + 0x3fff, .flags = IORESOURCE_MEM, }, }; -- cgit v1.2.2 From 4c91363dc01310dc34f1621ef00d680b4404f71c Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 7 Mar 2008 11:47:23 +0100 Subject: [ARM] 4856/1: Orion: initialise the sixth PCIe MBUS mapping window as well Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-orion/addr-map.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c index 2e2fd63643c3..58cc3c0333b6 100644 --- a/arch/arm/mach-orion/addr-map.c +++ b/arch/arm/mach-orion/addr-map.c @@ -97,14 +97,20 @@ #define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4)) #define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8)) #define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8)) -#define PCIE_WIN_CTRL(n) ORION_PCIE_REG(0x1820 + ((n) << 4)) -#define PCIE_WIN_BASE(n) ORION_PCIE_REG(0x1824 + ((n) << 4)) -#define PCIE_WIN_REMAP(n) ORION_PCIE_REG(0x182c + ((n) << 4)) +#define PCIE_WIN_CTRL(n) (((n) < 5) ? \ + ORION_PCIE_REG(0x1820 + ((n) << 4)) : \ + ORION_PCIE_REG(0x1880)) +#define PCIE_WIN_BASE(n) (((n) < 5) ? \ + ORION_PCIE_REG(0x1824 + ((n) << 4)) : \ + ORION_PCIE_REG(0x1884)) +#define PCIE_WIN_REMAP(n) (((n) < 5) ? \ + ORION_PCIE_REG(0x182c + ((n) << 4)) : \ + ORION_PCIE_REG(0x188c)) #define PCIE_DEFWIN_CTRL ORION_PCIE_REG(0x18b0) #define PCIE_EXPROM_WIN_CTRL ORION_PCIE_REG(0x18c0) #define PCIE_EXPROM_WIN_REMP ORION_PCIE_REG(0x18c4) #define PCIE_MAX_BARS 3 -#define PCIE_MAX_WINS 5 +#define PCIE_MAX_WINS 6 /* * Use PCIE BAR '1' for all DDR banks -- cgit v1.2.2 From 67951f63807328b81e45c3c87af049c55c0a0081 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 6 Mar 2008 15:32:06 -0600 Subject: [SCSI] Fix dependency problems in SCSI drivers We have several drivers that don't list SCSI as a dependency in Kconfig. That leads to them potentially being selected as Y even if SCSI is M (which will produce a build failure). Fix this by making the if SCSI_LOWLEVEL that goes around all the drivers a tristate forcing them all automatically to inherit the value of SCSI. Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c46666a24809..b9d374082b65 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -325,7 +325,7 @@ menuconfig SCSI_LOWLEVEL depends on SCSI!=n default y -if SCSI_LOWLEVEL +if SCSI_LOWLEVEL && SCSI config ISCSI_TCP tristate "iSCSI Initiator over TCP/IP" -- cgit v1.2.2 From 7962670e648a0431338a7ce73847c24bc023d095 Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Sun, 9 Mar 2008 03:44:18 +0000 Subject: [CIFS] DFS patch that connects inode with dfs handling ops if DFS junction point Signed-off-by: Igor Mammedov Signed-off-by: Steve French --- fs/cifs/inode.c | 133 ++++++++++++++++++++++++++++++-------------------------- 1 file changed, 71 insertions(+), 62 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 24eb4d392155..4f0ee67eb954 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -30,7 +30,7 @@ #include "cifs_fs_sb.h" -static void cifs_set_ops(struct inode *inode) +static void cifs_set_ops(struct inode *inode, const bool is_dfs_referral) { struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); @@ -57,8 +57,12 @@ static void cifs_set_ops(struct inode *inode) inode->i_data.a_ops = &cifs_addr_ops; break; case S_IFDIR: - inode->i_op = &cifs_dir_inode_ops; - inode->i_fop = &cifs_dir_ops; + if (is_dfs_referral) { + inode->i_op = &cifs_dfs_referral_inode_operations; + } else { + inode->i_op = &cifs_dir_inode_ops; + inode->i_fop = &cifs_dir_ops; + } break; case S_IFLNK: inode->i_op = &cifs_symlink_inode_ops; @@ -153,6 +157,30 @@ static void cifs_unix_info_to_inode(struct inode *inode, spin_unlock(&inode->i_lock); } +static const unsigned char *cifs_get_search_path(struct cifsTconInfo *pTcon, + const char *search_path) +{ + int tree_len; + int path_len; + char *tmp_path; + + if (!(pTcon->Flags & SMB_SHARE_IS_IN_DFS)) + return search_path; + + /* use full path name for working with DFS */ + tree_len = strnlen(pTcon->treeName, MAX_TREE_SIZE + 1); + path_len = strnlen(search_path, MAX_PATHCONF); + + tmp_path = kmalloc(tree_len+path_len+1, GFP_KERNEL); + if (tmp_path == NULL) + return search_path; + + strncpy(tmp_path, pTcon->treeName, tree_len); + strncpy(tmp_path+tree_len, search_path, path_len); + tmp_path[tree_len+path_len] = 0; + return tmp_path; +} + int cifs_get_inode_info_unix(struct inode **pinode, const unsigned char *search_path, struct super_block *sb, int xid) { @@ -161,41 +189,28 @@ int cifs_get_inode_info_unix(struct inode **pinode, struct cifsTconInfo *pTcon; struct inode *inode; struct cifs_sb_info *cifs_sb = CIFS_SB(sb); - char *tmp_path; + const unsigned char *full_path; + bool is_dfs_referral = false; pTcon = cifs_sb->tcon; cFYI(1, ("Getting info on %s", search_path)); + + full_path = cifs_get_search_path(pTcon, search_path); + +try_again_CIFSSMBUnixQPathInfo: /* could have done a find first instead but this returns more info */ - rc = CIFSSMBUnixQPathInfo(xid, pTcon, search_path, &findData, + rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &findData, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); /* dump_mem("\nUnixQPathInfo return data", &findData, sizeof(findData)); */ if (rc) { - if (rc == -EREMOTE) { - tmp_path = - kmalloc(strnlen(pTcon->treeName, - MAX_TREE_SIZE + 1) + - strnlen(search_path, MAX_PATHCONF) + 1, - GFP_KERNEL); - if (tmp_path == NULL) - return -ENOMEM; - - /* have to skip first of the double backslash of - UNC name */ - strncpy(tmp_path, pTcon->treeName, MAX_TREE_SIZE); - strncat(tmp_path, search_path, MAX_PATHCONF); - rc = connect_to_dfs_path(xid, pTcon->ses, - /* treename + */ tmp_path, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - kfree(tmp_path); - - /* BB fix up inode etc. */ - } else if (rc) { - return rc; + if (rc == -EREMOTE && !is_dfs_referral) { + is_dfs_referral = true; + full_path = search_path; + goto try_again_CIFSSMBUnixQPathInfo; } + goto cgiiu_exit; } else { struct cifsInodeInfo *cifsInfo; __u64 num_of_bytes = le64_to_cpu(findData.NumOfBytes); @@ -204,8 +219,10 @@ int cifs_get_inode_info_unix(struct inode **pinode, /* get new inode */ if (*pinode == NULL) { *pinode = new_inode(sb); - if (*pinode == NULL) - return -ENOMEM; + if (*pinode == NULL) { + rc = -ENOMEM; + goto cgiiu_exit; + } /* Is an i_ino of zero legal? */ /* Are there sanity checks we can use to ensure that the server is really filling in that field? */ @@ -237,8 +254,11 @@ int cifs_get_inode_info_unix(struct inode **pinode, (unsigned long) inode->i_size, (unsigned long long)inode->i_blocks)); - cifs_set_ops(inode); + cifs_set_ops(inode, is_dfs_referral); } +cgiiu_exit: + if (full_path != search_path) + kfree(full_path); return rc; } @@ -353,9 +373,10 @@ int cifs_get_inode_info(struct inode **pinode, struct cifsTconInfo *pTcon; struct inode *inode; struct cifs_sb_info *cifs_sb = CIFS_SB(sb); - char *tmp_path; + const unsigned char *full_path = NULL; char *buf = NULL; int adjustTZ = FALSE; + bool is_dfs_referral = false; pTcon = cifs_sb->tcon; cFYI(1, ("Getting info on %s", search_path)); @@ -373,8 +394,12 @@ int cifs_get_inode_info(struct inode **pinode, if (buf == NULL) return -ENOMEM; pfindData = (FILE_ALL_INFO *)buf; + + full_path = cifs_get_search_path(pTcon, search_path); + +try_again_CIFSSMBQPathInfo: /* could do find first instead but this returns more info */ - rc = CIFSSMBQPathInfo(xid, pTcon, search_path, pfindData, + rc = CIFSSMBQPathInfo(xid, pTcon, full_path, pfindData, 0 /* not legacy */, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); @@ -382,7 +407,7 @@ int cifs_get_inode_info(struct inode **pinode, when server claims no NT SMB support and the above call failed at least once - set flag in tcon or mount */ if ((rc == -EOPNOTSUPP) || (rc == -EINVAL)) { - rc = SMBQueryInformation(xid, pTcon, search_path, + rc = SMBQueryInformation(xid, pTcon, full_path, pfindData, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); @@ -391,31 +416,12 @@ int cifs_get_inode_info(struct inode **pinode, } /* dump_mem("\nQPathInfo return data",&findData, sizeof(findData)); */ if (rc) { - if (rc == -EREMOTE) { - tmp_path = - kmalloc(strnlen - (pTcon->treeName, - MAX_TREE_SIZE + 1) + - strnlen(search_path, MAX_PATHCONF) + 1, - GFP_KERNEL); - if (tmp_path == NULL) { - kfree(buf); - return -ENOMEM; - } - - strncpy(tmp_path, pTcon->treeName, MAX_TREE_SIZE); - strncat(tmp_path, search_path, MAX_PATHCONF); - rc = connect_to_dfs_path(xid, pTcon->ses, - /* treename + */ tmp_path, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - kfree(tmp_path); - /* BB fix up inode etc. */ - } else if (rc) { - kfree(buf); - return rc; + if (rc == -EREMOTE && !is_dfs_referral) { + is_dfs_referral = true; + full_path = search_path; + goto try_again_CIFSSMBQPathInfo; } + goto cgii_exit; } else { struct cifsInodeInfo *cifsInfo; __u32 attr = le32_to_cpu(pfindData->Attributes); @@ -424,8 +430,8 @@ int cifs_get_inode_info(struct inode **pinode, if (*pinode == NULL) { *pinode = new_inode(sb); if (*pinode == NULL) { - kfree(buf); - return -ENOMEM; + rc = -ENOMEM; + goto cgii_exit; } /* Is an i_ino of zero legal? Can we use that to check if the server supports returning inode numbers? Are @@ -573,8 +579,11 @@ int cifs_get_inode_info(struct inode **pinode, atomic_set(&cifsInfo->inUse, 1); } - cifs_set_ops(inode); + cifs_set_ops(inode, is_dfs_referral); } +cgii_exit: + if (full_path != search_path) + kfree(full_path); kfree(buf); return rc; } @@ -804,7 +813,7 @@ static void posix_fill_in_inode(struct inode *tmp_inode, local_size = tmp_inode->i_size; cifs_unix_info_to_inode(tmp_inode, pData, 1); - cifs_set_ops(tmp_inode); + cifs_set_ops(tmp_inode, false); if (!S_ISREG(tmp_inode->i_mode)) return; -- cgit v1.2.2 From bafe68034e3ef5e9f512bd0468001caf34981c41 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 10 Mar 2008 12:56:12 +0100 Subject: avr32: Work around byteswap bug in gcc < 4.2 gcc versions earlier than 4.2 sign-extends the result of le16_to_cpu() and friends when we implement __arch__swabX() using __builtin_bswap_X(). Disable our arch-specific optimizations when those gcc versions are being used. Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/byteorder.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/asm-avr32/byteorder.h b/include/asm-avr32/byteorder.h index 402ff4125cdc..d77b48ba7338 100644 --- a/include/asm-avr32/byteorder.h +++ b/include/asm-avr32/byteorder.h @@ -12,8 +12,14 @@ extern unsigned long __builtin_bswap_32(unsigned long x); extern unsigned short __builtin_bswap_16(unsigned short x); #endif +/* + * avr32-linux-gcc versions earlier than 4.2 improperly sign-extends + * the result. + */ +#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2) #define __arch__swab32(x) __builtin_bswap_32(x) #define __arch__swab16(x) __builtin_bswap_16(x) +#endif #if !defined(__STRICT_ANSI__) || defined(__KERNEL__) # define __BYTEORDER_HAS_U64__ -- cgit v1.2.2 From ad562c71592ae76440c27bba9bfa9c16cc851560 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 7 Mar 2008 17:59:03 -0600 Subject: [POWERPC] 83xx: Make 83xx perfmon support selectable Not all e300 cores support the performance monitors, and the ones that don't will be confused by the mf/mtpmr instructions. This allows the support to be optional, so the 8349 can turn it off while the 8379 can turn it on. Sadly, those aren't config options, so it will be left to the defconfigs and the users to make that determination. Signed-off-by: Andy Fleming Signed-off-by: Kumar Gala --- arch/powerpc/platforms/Kconfig | 1 - arch/powerpc/platforms/Kconfig.cputype | 7 ++++++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 0afd22595546..a578b966ecbc 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -22,7 +22,6 @@ config PPC_83xx select FSL_SOC select MPC83xx select IPIC - select FSL_EMB_PERFMON config PPC_86xx bool "Freescale 86xx" diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 73d81ce14b67..0c3face0ddbb 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -113,7 +113,12 @@ config FSL_BOOKE default y config FSL_EMB_PERFMON - bool + bool "Freescale Embedded Perfmon" + depends on E500 || PPC_83xx + help + This is the Performance Monitor support found on the e500 core + and some e300 cores (c3 and c4). Select this only if your + core supports the Embedded Performance Monitor APU config PTE_64BIT bool -- cgit v1.2.2 From 55f78e1771f0886162edd441dd4f39c287779de2 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Mon, 10 Mar 2008 17:14:34 +0000 Subject: [CIFS] cifs: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 18 +++++++++--------- fs/cifs/cifsproto.h | 4 ++-- fs/cifs/dns_resolve.c | 8 ++++---- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 7f8838253410..a1a95b027136 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -74,7 +74,7 @@ static char *cifs_get_share_name(const char *node_name) pSep = memchr(UNC+2, '\\', len-2); if (!pSep) { cERROR(1, ("%s: no server name end in node name: %s", - __FUNCTION__, node_name)); + __func__, node_name)); kfree(UNC); return NULL; } @@ -84,7 +84,7 @@ static char *cifs_get_share_name(const char *node_name) pSep = memchr(UNC+(pSep-UNC), '\\', len-(pSep-UNC)); if (!pSep) { cERROR(1, ("%s:2 cant find share name in node name: %s", - __FUNCTION__, node_name)); + __func__, node_name)); kfree(UNC); return NULL; } @@ -127,7 +127,7 @@ static char *compose_mount_options(const char *sb_mountdata, rc = dns_resolve_server_name_to_ip(*devname, &srvIP); if (rc != 0) { cERROR(1, ("%s: Failed to resolve server part of %s to IP", - __FUNCTION__, *devname)); + __func__, *devname)); mountdata = ERR_PTR(rc); goto compose_mount_options_out; } @@ -181,8 +181,8 @@ static char *compose_mount_options(const char *sb_mountdata, } } - /*cFYI(1,("%s: parent mountdata: %s", __FUNCTION__,sb_mountdata));*/ - /*cFYI(1, ("%s: submount mountdata: %s", __FUNCTION__, mountdata ));*/ + /*cFYI(1,("%s: parent mountdata: %s", __func__,sb_mountdata));*/ + /*cFYI(1, ("%s: submount mountdata: %s", __func__, mountdata ));*/ compose_mount_options_out: kfree(srvIP); @@ -302,7 +302,7 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd) int rc = 0; struct vfsmount *mnt = ERR_PTR(-ENOENT); - cFYI(1, ("in %s", __FUNCTION__)); + cFYI(1, ("in %s", __func__)); BUG_ON(IS_ROOT(dentry)); xid = GetXid(); @@ -336,7 +336,7 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd) len = strlen(referrals[i].node_name); if (len < 2) { cERROR(1, ("%s: Net Address path too short: %s", - __FUNCTION__, referrals[i].node_name)); + __func__, referrals[i].node_name)); rc = -EINVAL; goto out_err; } @@ -344,7 +344,7 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd) nd->path.dentry, referrals[i].node_name); cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p", - __FUNCTION__, + __func__, referrals[i].node_name, mnt)); /* complete mount procedure if we accured submount */ @@ -365,7 +365,7 @@ out: FreeXid(xid); free_dfs_info_array(referrals, num_referrals); kfree(full_path); - cFYI(1, ("leaving %s" , __FUNCTION__)); + cFYI(1, ("leaving %s" , __func__)); return ERR_PTR(rc); out_err: path_put(&nd->path); diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 0af63e6b426b..a0414bda587c 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -39,8 +39,8 @@ extern int smb_send(struct socket *, struct smb_hdr *, unsigned int /* length */ , struct sockaddr *); extern unsigned int _GetXid(void); extern void _FreeXid(unsigned int); -#define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__FUNCTION__, xid,current->fsuid)); -#define FreeXid(curr_xid) {_FreeXid(curr_xid); cFYI(1,("CIFS VFS: leaving %s (xid = %d) rc = %d",__FUNCTION__,curr_xid,(int)rc));} +#define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__func__, xid,current->fsuid)); +#define FreeXid(curr_xid) {_FreeXid(curr_xid); cFYI(1,("CIFS VFS: leaving %s (xid = %d) rc = %d",__func__,curr_xid,(int)rc));} extern char *build_path_from_dentry(struct dentry *); extern char *build_wildcard_path_from_dentry(struct dentry *direntry); /* extern void renew_parental_timestamps(struct dentry *direntry);*/ diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c index ef7f43824347..7cc86c418182 100644 --- a/fs/cifs/dns_resolve.c +++ b/fs/cifs/dns_resolve.c @@ -77,14 +77,14 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr) /* search for server name delimiter */ len = strlen(unc); if (len < 3) { - cFYI(1, ("%s: unc is too short: %s", __FUNCTION__, unc)); + cFYI(1, ("%s: unc is too short: %s", __func__, unc)); return -EINVAL; } len -= 2; name = memchr(unc+2, '\\', len); if (!name) { cFYI(1, ("%s: probably server name is whole unc: %s", - __FUNCTION__, unc)); + __func__, unc)); } else { len = (name - unc) - 2/* leading // */; } @@ -104,7 +104,7 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr) if (*ip_addr) { memcpy(*ip_addr, rkey->payload.data, len); (*ip_addr)[len] = '\0'; - cFYI(1, ("%s: resolved: %s to %s", __FUNCTION__, + cFYI(1, ("%s: resolved: %s to %s", __func__, rkey->description, *ip_addr )); @@ -114,7 +114,7 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr) } key_put(rkey); } else { - cERROR(1, ("%s: unable to resolve: %s", __FUNCTION__, name)); + cERROR(1, ("%s: unable to resolve: %s", __func__, name)); } kfree(name); -- cgit v1.2.2 From 86f4e5d4335556191b436b41b0ad2f719c4a98d4 Mon Sep 17 00:00:00 2001 From: Ionut Nicu Date: Fri, 7 Mar 2008 19:27:59 +0200 Subject: [POWERPC] QE: Make qe_get_firmware_info reentrant The function was returning NULL the second time it was called if the firmware was uploaded from the boot loader or the first time it was called if the firmware was uploaded from the kernel. Signed-off-by: Ionut Nicu Acked-By: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/qe_lib/qe.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index f963fbf21ef0..cc81fd1141b0 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -609,7 +609,10 @@ struct qe_firmware_info *qe_get_firmware_info(void) * If we haven't checked yet, and a driver hasn't uploaded a firmware * yet, then check the device tree for information. */ - if (initialized || qe_firmware_uploaded) + if (qe_firmware_uploaded) + return &qe_firmware_info; + + if (initialized) return NULL; initialized = 1; -- cgit v1.2.2 From b5e85dee2a5433246d5b7488918a1a0ad22c046a Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 10 Mar 2008 16:41:06 -0700 Subject: [NETFILTER]: nfnetlink: fix ifdef in nfnetlink_compat.h Use __KERNEL__ instead of __KERNEL to make sure the headers are not usable by the kernel. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter/nfnetlink_compat.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/netfilter/nfnetlink_compat.h b/include/linux/netfilter/nfnetlink_compat.h index 02a42d875cf7..e1451760c9cd 100644 --- a/include/linux/netfilter/nfnetlink_compat.h +++ b/include/linux/netfilter/nfnetlink_compat.h @@ -1,6 +1,6 @@ #ifndef _NFNETLINK_COMPAT_H #define _NFNETLINK_COMPAT_H -#ifndef __KERNEL +#ifndef __KERNEL__ /* Old nfnetlink macros for userspace */ /* nfnetlink groups: Up to 32 maximum */ -- cgit v1.2.2 From cabaa9bfb01eb4cee97ffb8a18405f4c5175d3d9 Mon Sep 17 00:00:00 2001 From: Eric Leblond Date: Mon, 10 Mar 2008 16:41:43 -0700 Subject: [NETFILTER]: nfnetlink_queue: fix computation of allocated size for netlink skb. Size of the netlink skb was wrongly computed because the formula was using NLMSG_ALIGN instead of NLMSG_SPACE. NLMSG_ALIGN does not add the room for netlink header as NLMSG_SPACE does. This was causing a failure of message building in some cases. On my test system, all messages for packets in range [8*k+41, 8*k+48] where k is an integer were invalid and the corresponding packets were dropped. Signed-off-by: Eric Leblond Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nfnetlink_queue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index 0043d3a9f87e..c0cc3d3618a3 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -224,7 +224,7 @@ nfqnl_build_packet_message(struct nfqnl_instance *queue, struct net_device *indev; struct net_device *outdev; - size = NLMSG_ALIGN(sizeof(struct nfgenmsg)) + size = NLMSG_SPACE(sizeof(struct nfgenmsg)) + nla_total_size(sizeof(struct nfqnl_msg_packet_hdr)) + nla_total_size(sizeof(u_int32_t)) /* ifindex */ + nla_total_size(sizeof(u_int32_t)) /* ifindex */ -- cgit v1.2.2 From 7000d38d6126d6ef928605bdacebc9f12279c5aa Mon Sep 17 00:00:00 2001 From: Eric Leblond Date: Mon, 10 Mar 2008 16:42:04 -0700 Subject: [NETFILTER]: nfnetlink_log: fix computation of netlink skb size This patch is similar to nfnetlink_queue fixes. It fixes the computation of skb size by using NLMSG_SPACE instead of NLMSG_ALIGN. Signed-off-by: Eric Leblond Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nfnetlink_log.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index 7efa40d47393..c6802c0d6ed8 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -556,7 +556,7 @@ nfulnl_log_packet(unsigned int pf, /* FIXME: do we want to make the size calculation conditional based on * what is actually present? way more branches and checks, but more * memory efficient... */ - size = NLMSG_ALIGN(sizeof(struct nfgenmsg)) + size = NLMSG_SPACE(sizeof(struct nfgenmsg)) + nla_total_size(sizeof(struct nfulnl_msg_packet_hdr)) + nla_total_size(sizeof(u_int32_t)) /* ifindex */ + nla_total_size(sizeof(u_int32_t)) /* ifindex */ -- cgit v1.2.2 From 4f4c9430cf5ee1ca3567bc88faf8b4c18ed0bd13 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Mon, 10 Mar 2008 16:42:40 -0700 Subject: [NETFILTER]: xt_time: fix failure to match on Sundays From: Andrew Schulman xt_time_match() in net/netfilter/xt_time.c in kernel 2.6.24 never matches on Sundays. On my host I have a rule like iptables -A OUTPUT -m time --weekdays Sun -j REJECT and it never matches. The problem is in localtime_2(), which uses r->weekday = (4 + r->dse) % 7; to map the epoch day onto a weekday in {0,...,6}. In particular this gives 0 for Sundays. But 0 has to be wrong; a weekday of 0 can never match. xt_time_match() has if (!(info->weekdays_match & (1 << current_time.weekday))) return false; and when current_time.weekday = 0, the result of the & is always zero, even when info->weekdays_match = XT_TIME_ALL_WEEKDAYS = 0xFE. Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_time.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/netfilter/xt_time.c b/net/netfilter/xt_time.c index e9a8794bc3ab..9fa2e0824708 100644 --- a/net/netfilter/xt_time.c +++ b/net/netfilter/xt_time.c @@ -95,8 +95,11 @@ static inline void localtime_2(struct xtm *r, time_t time) */ r->dse = time / 86400; - /* 1970-01-01 (w=0) was a Thursday (4). */ - r->weekday = (4 + r->dse) % 7; + /* + * 1970-01-01 (w=0) was a Thursday (4). + * -1 and +1 map Sunday properly onto 7. + */ + r->weekday = (4 + r->dse - 1) % 7 + 1; } static void localtime_3(struct xtm *r, time_t time) -- cgit v1.2.2 From 3d89e9cf3690b4645ce73b86c219c8188f8fa50a Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 10 Mar 2008 16:43:10 -0700 Subject: [NETFILTER]: nf_conntrack: add \n to "expectation table full" message Signed-off-by: Alexey Dobriyan Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_expect.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index e06bf0028bb1..684ec9c1ad38 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -381,7 +381,7 @@ int nf_ct_expect_related(struct nf_conntrack_expect *expect) if (nf_ct_expect_count >= nf_ct_expect_max) { if (net_ratelimit()) printk(KERN_WARNING - "nf_conntrack: expectation table full"); + "nf_conntrack: expectation table full\n"); ret = -EMFILE; goto out; } -- cgit v1.2.2 From 019f692ea719a2da17606511d2648b8cc1762268 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Mon, 10 Mar 2008 16:43:41 -0700 Subject: [NETFILTER]: nf_conntrack: replace horrible hack with ksize() There's a horrible slab abuse in net/netfilter/nf_conntrack_extend.c that can be replaced with a call to ksize(). Cc: Christoph Lameter Signed-off-by: Pekka Enberg Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/net/netfilter/nf_conntrack_extend.h | 1 - net/netfilter/nf_conntrack_extend.c | 19 +++---------------- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h index 49aac6323fbe..f736e842977f 100644 --- a/include/net/netfilter/nf_conntrack_extend.h +++ b/include/net/netfilter/nf_conntrack_extend.h @@ -17,7 +17,6 @@ enum nf_ct_ext_id struct nf_ct_ext { u8 offset[NF_CT_EXT_NUM]; u8 len; - u8 real_len; char data[0]; }; diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c index 8b9be1e978cd..2bd9963b5b3e 100644 --- a/net/netfilter/nf_conntrack_extend.c +++ b/net/netfilter/nf_conntrack_extend.c @@ -19,14 +19,6 @@ static struct nf_ct_ext_type *nf_ct_ext_types[NF_CT_EXT_NUM]; static DEFINE_MUTEX(nf_ct_ext_type_mutex); -/* Horrible trick to figure out smallest amount worth kmallocing. */ -#define CACHE(x) (x) + 0 * -enum { - NF_CT_EXT_MIN_SIZE = -#include - 1 }; -#undef CACHE - void __nf_ct_ext_destroy(struct nf_conn *ct) { unsigned int i; @@ -53,7 +45,7 @@ EXPORT_SYMBOL(__nf_ct_ext_destroy); static void * nf_ct_ext_create(struct nf_ct_ext **ext, enum nf_ct_ext_id id, gfp_t gfp) { - unsigned int off, len, real_len; + unsigned int off, len; struct nf_ct_ext_type *t; rcu_read_lock(); @@ -61,16 +53,14 @@ nf_ct_ext_create(struct nf_ct_ext **ext, enum nf_ct_ext_id id, gfp_t gfp) BUG_ON(t == NULL); off = ALIGN(sizeof(struct nf_ct_ext), t->align); len = off + t->len; - real_len = t->alloc_size; rcu_read_unlock(); - *ext = kzalloc(real_len, gfp); + *ext = kzalloc(t->alloc_size, gfp); if (!*ext) return NULL; (*ext)->offset[id] = off; (*ext)->len = len; - (*ext)->real_len = real_len; return (void *)(*ext) + off; } @@ -95,7 +85,7 @@ void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp) newlen = newoff + t->len; rcu_read_unlock(); - if (newlen >= ct->ext->real_len) { + if (newlen >= ksize(ct->ext)) { new = kmalloc(newlen, gfp); if (!new) return NULL; @@ -114,7 +104,6 @@ void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp) rcu_read_unlock(); } kfree(ct->ext); - new->real_len = newlen; ct->ext = new; } @@ -156,8 +145,6 @@ static void update_alloc_size(struct nf_ct_ext_type *type) t1->alloc_size = ALIGN(t1->alloc_size, t2->align) + t2->len; } - if (t1->alloc_size < NF_CT_EXT_MIN_SIZE) - t1->alloc_size = NF_CT_EXT_MIN_SIZE; } } -- cgit v1.2.2 From b7047a1c886386b10a103b4fea26678db8b57832 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 10 Mar 2008 16:44:13 -0700 Subject: [NETFILTER]: nfnetlink_log: fix EPERM when binding/unbinding and instance 0 exists When binding or unbinding to an address family, the res_id is usually set to zero. When logging instance 0 already exists and is owned by a different process, this makes nfunl_recv_config return -EPERM without performing the bind operation. Since no operation on the foreign logging instance itself was requested, this is incorrect. Move bind/unbind commands before the queue instance permissions checks. Also remove an incorrect comment. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nfnetlink_log.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index c6802c0d6ed8..bf3f19b21fe4 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -702,20 +702,30 @@ nfulnl_recv_config(struct sock *ctnl, struct sk_buff *skb, struct nfgenmsg *nfmsg = NLMSG_DATA(nlh); u_int16_t group_num = ntohs(nfmsg->res_id); struct nfulnl_instance *inst; + struct nfulnl_msg_config_cmd *cmd = NULL; int ret = 0; + if (nfula[NFULA_CFG_CMD]) { + u_int8_t pf = nfmsg->nfgen_family; + cmd = nla_data(nfula[NFULA_CFG_CMD]); + + /* Commands without queue context */ + switch (cmd->command) { + case NFULNL_CFG_CMD_PF_BIND: + return nf_log_register(pf, &nfulnl_logger); + case NFULNL_CFG_CMD_PF_UNBIND: + nf_log_unregister_pf(pf); + return 0; + } + } + inst = instance_lookup_get(group_num); if (inst && inst->peer_pid != NETLINK_CB(skb).pid) { ret = -EPERM; goto out_put; } - if (nfula[NFULA_CFG_CMD]) { - u_int8_t pf = nfmsg->nfgen_family; - struct nfulnl_msg_config_cmd *cmd; - - cmd = nla_data(nfula[NFULA_CFG_CMD]); - + if (cmd != NULL) { switch (cmd->command) { case NFULNL_CFG_CMD_BIND: if (inst) { @@ -738,14 +748,6 @@ nfulnl_recv_config(struct sock *ctnl, struct sk_buff *skb, instance_destroy(inst); goto out; - case NFULNL_CFG_CMD_PF_BIND: - ret = nf_log_register(pf, &nfulnl_logger); - break; - case NFULNL_CFG_CMD_PF_UNBIND: - /* This is a bug and a feature. We cannot unregister - * other handlers, like nfnetlink_inst can */ - nf_log_unregister_pf(pf); - break; default: ret = -ENOTSUPP; break; -- cgit v1.2.2 From 914afea84e3e20cdbcd040f8387a0e6ef20ffc97 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 10 Mar 2008 16:44:36 -0700 Subject: [NETFILTER]: nfnetlink_queue: fix EPERM when binding/unbinding and instance 0 exists Similar to the nfnetlink_log problem, nfnetlink_queue incorrectly returns -EPERM when binding or unbinding to an address family and queueing instance 0 exists and is owned by a different process. Unlike nfnetlink_log it previously completes the operation, but it is still incorrect. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nfnetlink_queue.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index c0cc3d3618a3..012cb6910820 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -703,19 +703,12 @@ nfqnl_recv_config(struct sock *ctnl, struct sk_buff *skb, /* Commands without queue context - might sleep */ switch (cmd->command) { case NFQNL_CFG_CMD_PF_BIND: - ret = nf_register_queue_handler(ntohs(cmd->pf), - &nfqh); - break; + return nf_register_queue_handler(ntohs(cmd->pf), + &nfqh); case NFQNL_CFG_CMD_PF_UNBIND: - ret = nf_unregister_queue_handler(ntohs(cmd->pf), - &nfqh); - break; - default: - break; + return nf_unregister_queue_handler(ntohs(cmd->pf), + &nfqh); } - - if (ret < 0) - return ret; } rcu_read_lock(); -- cgit v1.2.2 From 94be1a3f365e2b9f2615575d7fef16a0bad106a3 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 10 Mar 2008 16:45:05 -0700 Subject: [NETFILTER]: nf_queue: don't return error when unregistering a non-existant handler Commit ce7663d84: [NETFILTER]: nfnetlink_queue: don't unregister handler of other subsystem changed nf_unregister_queue_handler to return an error when attempting to unregister a queue handler that is not identical to the one passed in. This is correct in case we really do have a different queue handler already registered, but some existing userspace code always does an unbind before bind and aborts if that fails, so try to be nice and return success in that case. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_queue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c index bfc2928c1912..ddc80ea114cd 100644 --- a/net/netfilter/nf_queue.c +++ b/net/netfilter/nf_queue.c @@ -51,7 +51,7 @@ int nf_unregister_queue_handler(int pf, const struct nf_queue_handler *qh) return -EINVAL; mutex_lock(&queue_handler_mutex); - if (queue_handler[pf] != qh) { + if (queue_handler[pf] && queue_handler[pf] != qh) { mutex_unlock(&queue_handler_mutex); return -EINVAL; } -- cgit v1.2.2 From ce7c191bca88aa2f942f70a6d6c6315739a81a32 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 4 Mar 2008 20:17:02 +1100 Subject: [POWERPC] spufs: don't (ab)use SCHED_IDLE commit 4ef11014 introduced a usage of SCHED_IDLE to detect when a context is within spu_run. Instead of SCHED_IDLE (which has other meaning), add a flag to sched_flags to tell if a context should be running. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/run.c | 3 ++- arch/powerpc/platforms/cell/spufs/sched.c | 4 ++-- arch/powerpc/platforms/cell/spufs/spufs.h | 1 + 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 6221968c2a3c..cac69e116776 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -220,6 +220,7 @@ static int spu_run_init(struct spu_context *ctx, u32 *npc) } } + set_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags); return 0; } @@ -234,7 +235,7 @@ static int spu_run_fini(struct spu_context *ctx, u32 *npc, *npc = ctx->ops->npc_read(ctx); spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); - ctx->policy = SCHED_IDLE; + clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags); spu_release(ctx); if (signal_pending(current)) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 5d5f680cd0b8..00528ef84ad2 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -867,7 +867,7 @@ static noinline void spusched_tick(struct spu_context *ctx) if (ctx->policy == SCHED_FIFO) goto out; - if (--ctx->time_slice && ctx->policy != SCHED_IDLE) + if (--ctx->time_slice && test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags)) goto out; spu = ctx->spu; @@ -877,7 +877,7 @@ static noinline void spusched_tick(struct spu_context *ctx) new = grab_runnable_context(ctx->prio + 1, spu->node); if (new) { spu_unschedule(spu, ctx); - if (ctx->policy != SCHED_IDLE) + if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags)) spu_add_to_rq(ctx); } else { spu_context_nospu_trace(spusched_tick__newslice, ctx); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 2c2fe3c07d72..cdc515182f82 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -44,6 +44,7 @@ struct spu_gang; enum { SPU_SCHED_NOTIFY_ACTIVE, SPU_SCHED_WAS_ACTIVE, /* was active upon spu_acquire_saved() */ + SPU_SCHED_SPU_RUN, /* context is within spu_run */ }; struct spu_context { -- cgit v1.2.2 From c368392a9951e6e25e2e2f9268153f1e9365e2c2 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 11 Mar 2008 12:46:18 +1100 Subject: [POWERPC] spufs: fix rescheduling of non-runnable contexts At present, we can hit the BUG_ON in __spu_update_sched_info by reading the regs file of a context between two calls to spu_run. The spu_release_saved called by spufs_regs_read() is resulting in the (now non-runnable) context being placed back on the run queue, so the next call to spu_run ends up in the bug condition. This change uses the SPU_SCHED_SPU_RUN flag to only reschedule a context if it's still in spu_run(). Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/context.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index cf6c2c89211d..0ad83aeb70b1 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -170,7 +170,8 @@ void spu_release_saved(struct spu_context *ctx) { BUG_ON(ctx->state != SPU_STATE_SAVED); - if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags)) + if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags) && + test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags)) spu_activate(ctx, 0); spu_release(ctx); -- cgit v1.2.2 From c8d16e27a3601d1cbcdfe657eb4ff5e762019e8d Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Fri, 29 Feb 2008 07:38:54 +0800 Subject: ACPI: fix boot oops regression in thermal Fix a memory overflow bug when copying NULL internal package element object to external. http://bugzilla.kernel.org/show_bug.cgi?id=10132 Signed-off-by: Lin Ming Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/utilities/utobject.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c index 76ee766c84f9..e08b3fa6639f 100644 --- a/drivers/acpi/utilities/utobject.c +++ b/drivers/acpi/utilities/utobject.c @@ -432,7 +432,7 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object, * element -- which is legal) */ if (!internal_object) { - *obj_length = 0; + *obj_length = sizeof(union acpi_object); return_ACPI_STATUS(AE_OK); } -- cgit v1.2.2 From 4af8e10a6c57e7292862bd1703712f0565c7e429 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 11 Mar 2008 00:27:16 -0400 Subject: Revert "ACPI: EC: Use proper handle for boot EC" This reverts commit 208c70a45624400fafd7511b96bc426bf01f8f5e. http://bugzilla.kernel.org/show_bug.cgi?id=10100 Signed-off-by: Len Brown --- drivers/acpi/ec.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index caf873c14bfb..7222a18a0319 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -943,11 +943,7 @@ int __init acpi_ec_ecdt_probe(void) boot_ec->command_addr = ecdt_ptr->control.address; boot_ec->data_addr = ecdt_ptr->data.address; boot_ec->gpe = ecdt_ptr->gpe; - if (ACPI_FAILURE(acpi_get_handle(NULL, ecdt_ptr->id, - &boot_ec->handle))) { - pr_info("Failed to locate handle for boot EC\n"); - boot_ec->handle = ACPI_ROOT_OBJECT; - } + boot_ec->handle = ACPI_ROOT_OBJECT; } else { /* This workaround is needed only on some broken machines, * which require early EC, but fail to provide ECDT */ -- cgit v1.2.2 From bd12935f04066df31903eaf74b1cec03319ecd2e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 27 Feb 2008 20:56:01 +0100 Subject: ACPI: Fix a duplicate log level Signed-off-by: Jean Delvare Signed-off-by: Len Brown --- drivers/acpi/osl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 8edba7b678eb..065819ba87c7 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1237,7 +1237,7 @@ int acpi_check_resource_conflict(struct resource *res) if (clash) { if (acpi_enforce_resources != ENFORCE_RESOURCES_NO) { - printk(KERN_INFO "%sACPI: %s resource %s [0x%llx-0x%llx]" + printk("%sACPI: %s resource %s [0x%llx-0x%llx]" " conflicts with ACPI region %s" " [0x%llx-0x%llx]\n", acpi_enforce_resources == ENFORCE_RESOURCES_LAX -- cgit v1.2.2 From cae167d3d7f22a6a54ba47e7c3623b4c45a01e2b Mon Sep 17 00:00:00 2001 From: Yutaro Ebihara Date: Tue, 11 Mar 2008 13:58:50 +0900 Subject: serial: sh-sci: Fix fifo stall on SH7760/SH7780/SH7785 SCIF. There was an off-by-1 in the SCRFDR calculation that caused writes over 128-bytes to hang in the FIFO. Fix it up. Signed-off-by: Yutaro Ebihara Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index a8c116b80bff..9d244d1644e1 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -414,12 +414,12 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) defined(CONFIG_CPU_SUBTYPE_SH7785) static inline int scif_txroom(struct uart_port *port) { - return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f); + return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff); } static inline int scif_rxroom(struct uart_port *port) { - return sci_in(port, SCRFDR) & 0x7f; + return sci_in(port, SCRFDR) & 0xff; } #else static inline int scif_txroom(struct uart_port *port) -- cgit v1.2.2 From 96b2dd1f1fdb9a131b7f2e79e5c7b2e4282cfcbf Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 5 Mar 2008 18:24:51 -0800 Subject: ACPI: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison Signed-off-by: Len Brown --- drivers/acpi/bus.c | 2 +- drivers/acpi/scan.c | 2 +- drivers/acpi/sleep/main.c | 2 +- drivers/acpi/utilities/utdebug.c | 2 +- drivers/acpi/video.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index ce3c0a2cbac4..5b6760e0f957 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -776,7 +776,7 @@ static int __init acpi_init(void) acpi_kobj = kobject_create_and_add("acpi", firmware_kobj); if (!acpi_kobj) { - printk(KERN_WARNING "%s: kset create error\n", __FUNCTION__); + printk(KERN_WARNING "%s: kset create error\n", __func__); acpi_kobj = NULL; } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 3fac011f9cf9..b26e3019e1cc 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -966,7 +966,7 @@ static void acpi_device_set_id(struct acpi_device *device, case ACPI_BUS_TYPE_DEVICE: status = acpi_get_object_info(handle, &buffer); if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "%s: Error reading device info\n", __FUNCTION__); + printk(KERN_ERR PREFIX "%s: Error reading device info\n", __func__); return; } diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 293a1cbb47c0..d2f71a54726c 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -504,7 +504,7 @@ static void acpi_power_off_prepare(void) static void acpi_power_off(void) { /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ - printk("%s called\n", __FUNCTION__); + printk("%s called\n", __func__); local_irq_disable(); acpi_enable_wakeup_device(ACPI_STATE_S5); acpi_enter_sleep_state(ACPI_STATE_S5); diff --git a/drivers/acpi/utilities/utdebug.c b/drivers/acpi/utilities/utdebug.c index c7e128e5369b..7361204b1eef 100644 --- a/drivers/acpi/utilities/utdebug.c +++ b/drivers/acpi/utilities/utdebug.c @@ -109,7 +109,7 @@ void acpi_ut_track_stack_ptr(void) * RETURN: Updated pointer to the function name * * DESCRIPTION: Remove the "Acpi" prefix from the function name, if present. - * This allows compiler macros such as __FUNCTION__ to be used + * This allows compiler macros such as __func__ to be used * with no change to the debug output. * ******************************************************************************/ diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 12cce69b5441..d64a142e5e10 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1201,7 +1201,7 @@ static int acpi_video_bus_ROM_seq_show(struct seq_file *seq, void *offset) if (!video) goto end; - printk(KERN_INFO PREFIX "Please implement %s\n", __FUNCTION__); + printk(KERN_INFO PREFIX "Please implement %s\n", __func__); seq_printf(seq, "\n"); end: -- cgit v1.2.2 From 2c81ce4c9c37b910210f2640c28e98a0c398dc26 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 11 Mar 2008 13:30:00 -0400 Subject: ACPI: EC: Handle IRQ storm on Acer laptops On some Acer systems, the HW fails to clear the GPE source, causing an interrupt storm. So in EC interrupt mode, we count how many interrupts we receive when waiting. If we get more than 5, we give up on interrupt mode and revert to polling mode. Also, for polling mode to work on Acers, we need to insert a delay. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index caf873c14bfb..2c77359dbdc9 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -129,6 +129,7 @@ static struct acpi_ec { struct mutex lock; wait_queue_head_t wait; struct list_head list; + atomic_t irq_count; u8 handlers_installed; } *boot_ec, *first_ec; @@ -181,6 +182,8 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) { int ret = 0; + atomic_set(&ec->irq_count, 0); + if (unlikely(event == ACPI_EC_EVENT_OBF_1 && test_bit(EC_FLAGS_NO_OBF1_GPE, &ec->flags))) force_poll = 1; @@ -227,6 +230,7 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) while (time_before(jiffies, delay)) { if (acpi_ec_check_status(ec, event)) goto end; + msleep(5); } } pr_err(PREFIX "acpi_ec_wait timeout," @@ -529,6 +533,13 @@ static u32 acpi_ec_gpe_handler(void *data) struct acpi_ec *ec = data; pr_debug(PREFIX "~~~> interrupt\n"); + atomic_inc(&ec->irq_count); + if (atomic_read(&ec->irq_count) > 5) { + pr_err(PREFIX "GPE storm detected, disabling EC GPE\n"); + acpi_disable_gpe(NULL, ec->gpe, ACPI_ISR); + clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); + return ACPI_INTERRUPT_HANDLED; + } clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) wake_up(&ec->wait); -- cgit v1.2.2 From 4db42c51ce0033f409fc3a2742e7aa2efa03f7c3 Mon Sep 17 00:00:00 2001 From: "arvidjaar@mail.ru" Date: Tue, 4 Mar 2008 15:06:34 -0800 Subject: toshiba_acpi: Enable autoloading This adds aliases to enable autoloading of toishiba_acpi. Two aliases are defined - TOS6200 (for \\_SB_.VALD.GHCI) and TSO1900 (for \\_SB_.VALZ.GHCI). This allows toishiba_acpi to be autoloaded on systems that provide those devices. Signed-off-by: Andrey Borzenkov Cc: Olivier Blin Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/toshiba_acpi.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index 9e8c20c6a0b7..0a43c8e0eff3 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -99,6 +99,13 @@ MODULE_LICENSE("GPL"); #define HCI_VIDEO_OUT_CRT 0x2 #define HCI_VIDEO_OUT_TV 0x4 +static const struct acpi_device_id toshiba_device_ids[] = { + {"TOS6200", 0}, + {"TOS1900", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, toshiba_device_ids); + /* utility */ -- cgit v1.2.2 From 3b34e5232fa9776e9a4b3f539cd9fee7609c900e Mon Sep 17 00:00:00 2001 From: Andrey Borzenkov Date: Tue, 4 Mar 2008 15:06:35 -0800 Subject: ACPI: button: make real parent for input devices in device tree Signed-off-by: Andrey Borzenkov Cc: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/button.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 24a7865a57cb..6c5da83cdb68 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -449,6 +449,7 @@ static int acpi_button_add(struct acpi_device *device) input->phys = button->phys; input->id.bustype = BUS_HOST; input->id.product = button->type; + input->dev.parent = &device->dev; switch (button->type) { case ACPI_BUTTON_TYPE_POWER: -- cgit v1.2.2 From d6f882e10442c1ea6ed5f93365f48be4cb520be7 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Tue, 4 Mar 2008 15:06:36 -0800 Subject: ACPI: use ACPI_DEBUG_PRINT instead of printk in acpi_processor_hotplug_notify() For consistency, use ACPI_DEBUG_PRINT instead of printk in acpi_processor_hotplug_notify() for BUS_CHECK and DEVICE_CHECK events Signed-off-by: Glauber Costa Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index a3cc8a98255c..3501cb53857b 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -897,9 +897,10 @@ acpi_processor_hotplug_notify(acpi_handle handle, u32 event, void *data) switch (event) { case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: - printk("Processor driver received %s event\n", + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Processor driver received %s event\n", (event == ACPI_NOTIFY_BUS_CHECK) ? - "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK"); + "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK")); if (!is_processor_present(handle)) break; -- cgit v1.2.2 From 97ed83905e5f8547a94a8066441351c6920728a1 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 6 Mar 2008 13:08:09 -0500 Subject: drivers/net/Kconfig: fix whitespace for GELIC_WIRELESS entry Signed-off-by: John W. Linville --- drivers/net/Kconfig | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a64bb415f10c..fe7b5ec09708 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2366,15 +2366,15 @@ config GELIC_NET module will be called ps3_gelic. config GELIC_WIRELESS - bool "PS3 Wireless support" - depends on GELIC_NET - select WIRELESS_EXT - help - This option adds the support for the wireless feature of PS3. - If you have the wireless-less model of PS3 or have no plan to - use wireless feature, disabling this option saves memory. As - the driver automatically distinguishes the models, you can - safely enable this option even if you have a wireless-less model. + bool "PS3 Wireless support" + depends on GELIC_NET + select WIRELESS_EXT + help + This option adds the support for the wireless feature of PS3. + If you have the wireless-less model of PS3 or have no plan to + use wireless feature, disabling this option saves memory. As + the driver automatically distinguishes the models, you can + safely enable this option even if you have a wireless-less model. config GIANFAR tristate "Gianfar Ethernet" -- cgit v1.2.2 From 5f0547c2813d4677908fa6de02f9911d25996515 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Thu, 6 Mar 2008 10:30:21 +0100 Subject: libertas: fix the 'compare command with itself' properly |libertas: Invalid CMD_RESP 8012 to command 50! The special case got mixed up in 8a96df80b3. Signed-off-by: Sebastian Siewior Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cmdresp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c index bdc6a1cc2103..f0ef7081bdeb 100644 --- a/drivers/net/wireless/libertas/cmdresp.c +++ b/drivers/net/wireless/libertas/cmdresp.c @@ -578,7 +578,7 @@ int lbs_process_rx_command(struct lbs_private *priv) goto done; } if (respcmd != CMD_RET(curcmd) && - respcmd != CMD_802_11_ASSOCIATE && curcmd != CMD_RET_802_11_ASSOCIATE) { + respcmd != CMD_RET_802_11_ASSOCIATE && curcmd != CMD_802_11_ASSOCIATE) { lbs_pr_info("Invalid CMD_RESP %x to command %x!\n", respcmd, curcmd); spin_unlock_irqrestore(&priv->driver_lock, flags); ret = -1; -- cgit v1.2.2 From fbb0a27a8ad56f822f479ee85446d9c29483a3d1 Mon Sep 17 00:00:00 2001 From: Adam Baker Date: Sun, 9 Mar 2008 22:40:40 +0100 Subject: rt2x00: never disable multicast because it disables broadcast too On rt73 and rt61 disabling reception of multicast packets also disables broadcast traffic which we never want to do. Therefore we should never disable multicast. Signed-off-by: Adam Baker Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt61pci.c | 4 ++-- drivers/net/wireless/rt2x00/rt73usb.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index e808db98f2f5..93ea212fedd5 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2302,9 +2302,9 @@ static void rt61pci_configure_filter(struct ieee80211_hw *hw, * Apply some rules to the filters: * - Some filters imply different filters to be set. * - Some things we can't filter out at all. + * - Multicast filter seems to kill broadcast traffic so never use it. */ - if (mc_count) - *total_flags |= FIF_ALLMULTI; + *total_flags |= FIF_ALLMULTI; if (*total_flags & FIF_OTHER_BSS || *total_flags & FIF_PROMISC_IN_BSS) *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 4fac2d414d84..2917700a2549 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1869,9 +1869,9 @@ static void rt73usb_configure_filter(struct ieee80211_hw *hw, * Apply some rules to the filters: * - Some filters imply different filters to be set. * - Some things we can't filter out at all. + * - Multicast filter seems to kill broadcast traffic so never use it. */ - if (mc_count) - *total_flags |= FIF_ALLMULTI; + *total_flags |= FIF_ALLMULTI; if (*total_flags & FIF_OTHER_BSS || *total_flags & FIF_PROMISC_IN_BSS) *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; -- cgit v1.2.2 From 445815d7ea4f59baf103f28b45f7dd45f21ff75d Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 9 Mar 2008 22:42:32 +0100 Subject: rt2x00: Add new D-Link USB ID Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt73usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 2917700a2549..8103d41a1543 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2098,6 +2098,7 @@ static struct usb_device_id rt73usb_device_table[] = { /* D-Link */ { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) }, /* Gemtek */ { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) }, /* Gigabyte */ -- cgit v1.2.2 From 140277e9a710202608914b5b731948d2769399bc Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Fri, 14 Dec 2007 01:53:56 -0800 Subject: IB/ipath: Fix IB compliance problems with link state vs physical state Subnet manager SetPortinfo messages distingush between changing the link state (DOWN, ARM, ACTIVE) and the link physical state (POLL, SLEEP, DISABLED). These are somewhat independent commands and affect when link width and speed changes take effect. Without this patch, a link DOWN physical state NOP command was causing the link width and speed settings to take effect which should only happen when the link physical state is goes down (either by a SMP or some link physical error like link errors exceeding the threshold). Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_common.h | 2 +- drivers/infiniband/hw/ipath/ipath_driver.c | 28 ++++++++++++--------------- drivers/infiniband/hw/ipath/ipath_kernel.h | 1 + drivers/infiniband/hw/ipath/ipath_mad.c | 7 +++---- drivers/infiniband/hw/ipath/ipath_registers.h | 2 +- 5 files changed, 18 insertions(+), 22 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h index 414621095540..591901aab6b7 100644 --- a/drivers/infiniband/hw/ipath/ipath_common.h +++ b/drivers/infiniband/hw/ipath/ipath_common.h @@ -75,7 +75,7 @@ #define IPATH_IB_LINKDOWN 0 #define IPATH_IB_LINKARM 1 #define IPATH_IB_LINKACTIVE 2 -#define IPATH_IB_LINKINIT 3 +#define IPATH_IB_LINKDOWN_ONLY 3 #define IPATH_IB_LINKDOWN_SLEEP 4 #define IPATH_IB_LINKDOWN_DISABLE 5 #define IPATH_IB_LINK_LOOPBACK 6 /* enable local loopback */ diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index d5ff6ca2db30..ca4d0acc6786 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -851,8 +851,7 @@ void ipath_disarm_piobufs(struct ipath_devdata *dd, unsigned first, * -ETIMEDOUT state can have multiple states set, for any of several * transitions. */ -static int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, - int msecs) +int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, int msecs) { dd->ipath_state_wanted = state; wait_event_interruptible_timeout(ipath_state_wait, @@ -1656,8 +1655,8 @@ void ipath_cancel_sends(struct ipath_devdata *dd, int restore_sendctrl) static void ipath_set_ib_lstate(struct ipath_devdata *dd, int which) { static const char *what[4] = { - [0] = "DOWN", - [INFINIPATH_IBCC_LINKCMD_INIT] = "INIT", + [0] = "NOP", + [INFINIPATH_IBCC_LINKCMD_DOWN] = "DOWN", [INFINIPATH_IBCC_LINKCMD_ARMED] = "ARMED", [INFINIPATH_IBCC_LINKCMD_ACTIVE] = "ACTIVE" }; @@ -1672,9 +1671,9 @@ static void ipath_set_ib_lstate(struct ipath_devdata *dd, int which) (dd, dd->ipath_kregs->kr_ibcstatus) >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) & INFINIPATH_IBCS_LINKTRAININGSTATE_MASK]); - /* flush all queued sends when going to DOWN or INIT, to be sure that + /* flush all queued sends when going to DOWN to be sure that * they don't block MAD packets */ - if (!linkcmd || linkcmd == INFINIPATH_IBCC_LINKCMD_INIT) + if (linkcmd == INFINIPATH_IBCC_LINKCMD_DOWN) ipath_cancel_sends(dd, 1); ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, @@ -1687,6 +1686,13 @@ int ipath_set_linkstate(struct ipath_devdata *dd, u8 newstate) int ret; switch (newstate) { + case IPATH_IB_LINKDOWN_ONLY: + ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN << + INFINIPATH_IBCC_LINKCMD_SHIFT); + /* don't wait */ + ret = 0; + goto bail; + case IPATH_IB_LINKDOWN: ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_POLL << INFINIPATH_IBCC_LINKINITCMD_SHIFT); @@ -1709,16 +1715,6 @@ int ipath_set_linkstate(struct ipath_devdata *dd, u8 newstate) ret = 0; goto bail; - case IPATH_IB_LINKINIT: - if (dd->ipath_flags & IPATH_LINKINIT) { - ret = 0; - goto bail; - } - ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_INIT << - INFINIPATH_IBCC_LINKCMD_SHIFT); - lstate = IPATH_LINKINIT; - break; - case IPATH_IB_LINKARM: if (dd->ipath_flags & IPATH_LINKARMED) { ret = 0; diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 4cc0f95ea877..ecf3f7ff7717 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -767,6 +767,7 @@ void ipath_kreceive(struct ipath_portdata *); int ipath_setrcvhdrsize(struct ipath_devdata *, unsigned); int ipath_reset_device(int); void ipath_get_faststats(unsigned long); +int ipath_wait_linkstate(struct ipath_devdata *, u32, int); int ipath_set_linkstate(struct ipath_devdata *, u8); int ipath_set_mtu(struct ipath_devdata *, u16); int ipath_set_lid(struct ipath_devdata *, u32, u8); diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c index d98d5f103700..b34b91d3723a 100644 --- a/drivers/infiniband/hw/ipath/ipath_mad.c +++ b/drivers/infiniband/hw/ipath/ipath_mad.c @@ -555,10 +555,7 @@ static int recv_subn_set_portinfo(struct ib_smp *smp, /* FALLTHROUGH */ case IB_PORT_DOWN: if (lstate == 0) - if (get_linkdowndefaultstate(dd)) - lstate = IPATH_IB_LINKDOWN_SLEEP; - else - lstate = IPATH_IB_LINKDOWN; + lstate = IPATH_IB_LINKDOWN_ONLY; else if (lstate == 1) lstate = IPATH_IB_LINKDOWN_SLEEP; else if (lstate == 2) @@ -568,6 +565,8 @@ static int recv_subn_set_portinfo(struct ib_smp *smp, else goto err; ipath_set_linkstate(dd, lstate); + ipath_wait_linkstate(dd, IPATH_LINKINIT | IPATH_LINKARMED | + IPATH_LINKACTIVE, 1000); break; case IB_PORT_ARMED: ipath_set_linkstate(dd, IPATH_IB_LINKARM); diff --git a/drivers/infiniband/hw/ipath/ipath_registers.h b/drivers/infiniband/hw/ipath/ipath_registers.h index 6d2a17f9c1da..92ad73a7fff0 100644 --- a/drivers/infiniband/hw/ipath/ipath_registers.h +++ b/drivers/infiniband/hw/ipath/ipath_registers.h @@ -185,7 +185,7 @@ #define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3 #define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16 #define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL -#define INFINIPATH_IBCC_LINKCMD_INIT 1 /* move to 0x11 */ +#define INFINIPATH_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */ #define INFINIPATH_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */ #define INFINIPATH_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */ #define INFINIPATH_IBCC_LINKCMD_SHIFT 18 -- cgit v1.2.2 From 87d5aed85b2d79e4075ad2ca1449e9b98f657a09 Mon Sep 17 00:00:00 2001 From: Patrick Marchand Latifi Date: Mon, 7 Jan 2008 23:43:04 -0800 Subject: IB/ipath: Fix potentially wrong RNR retry counter returned in ipath_query_qp() There can be a case where the requester's rnr retry counter (s_rnr_retry) is less than the number of rnr retries allowed per QP (s_rnr_retry_cnt). This can happen if the s_rnr_retry counter is being decremented and an ipath_query_qp call is issued during that time frame. The fix is to always return the number of rnr retries allowed per QP instead of the requester's rnr counter. Found by code review. Signed-off-by: Patrick Marchand Latifi Acked-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c index 80dc623cee40..8214c0905c75 100644 --- a/drivers/infiniband/hw/ipath/ipath_qp.c +++ b/drivers/infiniband/hw/ipath/ipath_qp.c @@ -647,7 +647,7 @@ int ipath_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, attr->port_num = 1; attr->timeout = qp->timeout; attr->retry_cnt = qp->s_retry_cnt; - attr->rnr_retry = qp->s_rnr_retry; + attr->rnr_retry = qp->s_rnr_retry_cnt; attr->alt_port_num = 0; attr->alt_timeout = 0; -- cgit v1.2.2 From 4cd5060cf7c2207c31e2e368f8a6343355362e51 Mon Sep 17 00:00:00 2001 From: Patrick Marchand Latifi Date: Fri, 18 Jan 2008 20:10:48 -0800 Subject: IB/ipath: Fix RC QP initialization This patch fixes the initialization of RC QPs, since we would rely on the queue pair type (ibqp->qp_type) being set, but this field is only initialized when we return from ipath_create_qp (it is initialized by the user-level verbs library). The fix is to not depend on this field to initialize the send and the receive state of the RC QP. Signed-off-by: Patrick Marchand Latifi Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_qp.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c index 8214c0905c75..553d9007cf07 100644 --- a/drivers/infiniband/hw/ipath/ipath_qp.c +++ b/drivers/infiniband/hw/ipath/ipath_qp.c @@ -329,8 +329,9 @@ struct ipath_qp *ipath_lookup_qpn(struct ipath_qp_table *qpt, u32 qpn) /** * ipath_reset_qp - initialize the QP state to the reset state * @qp: the QP to reset + * @type: the QP type */ -static void ipath_reset_qp(struct ipath_qp *qp) +static void ipath_reset_qp(struct ipath_qp *qp, enum ib_qp_type type) { qp->remote_qpn = 0; qp->qkey = 0; @@ -342,7 +343,7 @@ static void ipath_reset_qp(struct ipath_qp *qp) qp->s_psn = 0; qp->r_psn = 0; qp->r_msn = 0; - if (qp->ibqp.qp_type == IB_QPT_RC) { + if (type == IB_QPT_RC) { qp->s_state = IB_OPCODE_RC_SEND_LAST; qp->r_state = IB_OPCODE_RC_SEND_LAST; } else { @@ -534,7 +535,7 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, switch (new_state) { case IB_QPS_RESET: - ipath_reset_qp(qp); + ipath_reset_qp(qp, ibqp->qp_type); break; case IB_QPS_ERR: @@ -839,7 +840,7 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd, goto bail_qp; } qp->ip = NULL; - ipath_reset_qp(qp); + ipath_reset_qp(qp, init_attr->qp_type); break; default: -- cgit v1.2.2 From 2a049e514b890c8b70b965bbd9f4e3c963af69c9 Mon Sep 17 00:00:00 2001 From: Patrick Marchand Latifi Date: Thu, 31 Jan 2008 00:24:37 -0800 Subject: IB/ipath: Fix error completion put on send CQ instead of recv CQ A work completion entry could be placed on the wrong completion queue when an RC QP is placed in the error state. Signed-off-by: Patrick Marchand Latifi Acked-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c index 553d9007cf07..087ed3166479 100644 --- a/drivers/infiniband/hw/ipath/ipath_qp.c +++ b/drivers/infiniband/hw/ipath/ipath_qp.c @@ -415,7 +415,7 @@ int ipath_error_qp(struct ipath_qp *qp, enum ib_wc_status err) wc.wr_id = qp->r_wr_id; wc.opcode = IB_WC_RECV; wc.status = err; - ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 1); + ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1); } wc.status = IB_WC_WR_FLUSH_ERR; -- cgit v1.2.2 From 450bb3875f5f5ab3679823c941d6045d16967370 Mon Sep 17 00:00:00 2001 From: Patrick Marchand Latifi Date: Wed, 20 Feb 2008 19:08:10 -0800 Subject: IB/ipath: Reset the retry counter for RDMA_READ_RESPONSE_MIDDLE packets Reset the retry counter when we get a good RDMA_READ_RESPONSE_MIDDLE packet. This fix will prevent the requester from reporting a retry exceeded error too early. Signed-off-by: Patrick Marchand Latifi --- drivers/infiniband/hw/ipath/ipath_rc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/infiniband/hw/ipath/ipath_rc.c b/drivers/infiniband/hw/ipath/ipath_rc.c index 459e46e2c016..40f3e37d7adc 100644 --- a/drivers/infiniband/hw/ipath/ipath_rc.c +++ b/drivers/infiniband/hw/ipath/ipath_rc.c @@ -1196,6 +1196,10 @@ static inline void ipath_rc_rcv_resp(struct ipath_ibdev *dev, list_move_tail(&qp->timerwait, &dev->pending[dev->pending_index]); spin_unlock(&dev->pending_lock); + + if (opcode == OP(RDMA_READ_RESPONSE_MIDDLE)) + qp->s_retry = qp->s_retry_cnt; + /* * Update the RDMA receive state but do the copy w/o * holding the locks and blocking interrupts. -- cgit v1.2.2 From bc5b6e24a17f90c7d096d857650f4739cc95c941 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 11 Mar 2008 21:07:48 +0000 Subject: [CIFS] Fix build problem Signed-off-by: Steve French --- fs/cifs/inode.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 4f0ee67eb954..af422625cee6 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -57,9 +57,13 @@ static void cifs_set_ops(struct inode *inode, const bool is_dfs_referral) inode->i_data.a_ops = &cifs_addr_ops; break; case S_IFDIR: +#ifdef CONFIG_CIFS_DFS_UPCALL if (is_dfs_referral) { inode->i_op = &cifs_dfs_referral_inode_operations; } else { +#else /* NO DFS support, treat as a directory */ + { +#endif inode->i_op = &cifs_dir_inode_ops; inode->i_fop = &cifs_dir_ops; } -- cgit v1.2.2 From b3e2749bf32f61e7beb259eb7cfb066d2ec6ad65 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 11 Mar 2008 16:10:02 +0200 Subject: IPoIB: Don't drop multicast sends when they can be queued When set_multicast_list() is called the multicast task is restarted and the IPOIB_MCAST_STARTED bit is cleared. As a result for some window of time, multicast packets are not transmitted nor queued but rather dropped by ipoib_mcast_send(). These dropped packets are painful in two cases: - bonding fail-over which both calls set_multicast_list() on the new active slave and sends Gratuitous ARP through that slave. - IP_DROP_MEMBERSHIP code which both calls set_multicast_list() on the device and issues IGMP leave. In both these cases, depending on the scheduling of the IPoIB multicast task, the packets would be dropped. As a result, in the bonding case, the failover would not be detected by the peers until their neighbour is renewed the neighbour (which takes a few tens of seconds). In the IGMP case, the IP router doesn't get an IGMP leave and would only learn on that from further probes on the group (also a delay of at least a few tens of seconds). Fix this by allowing transmission (or queuing) depending on the IPOIB_FLAG_OPER_UP flag instead of the IPOIB_MCAST_STARTED flag. Signed-off-by: Olga Shern Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 2628339e3a99..31a53c5bcb13 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -650,7 +650,7 @@ void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb) */ spin_lock(&priv->lock); - if (!test_bit(IPOIB_MCAST_STARTED, &priv->flags) || + if (!test_bit(IPOIB_FLAG_OPER_UP, &priv->flags) || !priv->broadcast || !test_bit(IPOIB_MCAST_FLAG_ATTACHED, &priv->broadcast->flags)) { ++dev->stats.tx_dropped; -- cgit v1.2.2 From 343c00422d3296838927016750b18ead8aa8bf9a Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sun, 24 Feb 2008 13:34:18 +0000 Subject: acer-wmi: Rename mail LED correctly & remove hardcoded colour The mail LED name for acer-wmi currently hardcodes in the colour as green. This is wrong, since many of the newer laptops now come with an orange LED, and we have no way of telling what colour is used on a given system. Also, rename the mail LED to be inline with the current recommendations of the LED class documentation. Signed-off-by: Carlos Corbacho Signed-off-by: Len Brown --- Documentation/laptops/acer-wmi.txt | 2 +- drivers/misc/acer-wmi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt index b06696329cff..a346c8666d22 100644 --- a/Documentation/laptops/acer-wmi.txt +++ b/Documentation/laptops/acer-wmi.txt @@ -169,7 +169,7 @@ can be added to acer-wmi. The LED is exposed through the LED subsystem, and can be found in: -/sys/devices/platform/acer-wmi/leds/acer-mail:green/ +/sys/devices/platform/acer-wmi/leds/acer-wmi::mail/ The mail LED is autodetected, so if you don't have one, the LED device won't be registered. diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index 74d12b4a3abd..e85d96f99ae6 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -761,7 +761,7 @@ enum led_brightness value) } static struct led_classdev mail_led = { - .name = "acer-mail:green", + .name = "acer-wmi::mail", .brightness_set = mail_led_set, }; -- cgit v1.2.2 From 9b963c40306ba6967650dce99f4e823f1da49a60 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sun, 24 Feb 2008 13:34:29 +0000 Subject: acer-wmi: Don't warn if mail LED cannot be detected This warning confuses users, who think it is an error. Not detecting the mail LED simply means it isn't there, so let's not unduly panic users. Signed-off-by: Carlos Corbacho Signed-off-by: Len Brown --- drivers/misc/acer-wmi.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index e85d96f99ae6..49846bd2b5c8 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -1069,10 +1069,8 @@ static int __init acer_wmi_init(void) } } - if (wmi_has_guid(AMW0_GUID1)) { - if (ACPI_FAILURE(AMW0_find_mailled())) - printk(ACER_ERR "Unable to detect mail LED\n"); - } + if (wmi_has_guid(AMW0_GUID1)) + AMW0_find_mailled(); find_quirks(); -- cgit v1.2.2 From a527f2d7fe58ce95bfec998f3dc6f658c777a2f2 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sun, 24 Feb 2008 13:34:34 +0000 Subject: ACPI: WMI: Clean up handling of spec violating data blocks Acer violate the ACPI-WMI spec by declaring some of their data blocks as expensive, but with no corresponding WCxx method. There is already some workaround code in to handle the initial WCxx call (we just ignore a failure here); but we need to properly check if the second, "clean up", WCxx call is actually needed or not, rather than fail simply because it isn't there. Signed-off-by: Carlos Corbacho Signed-off-by: Len Brown --- drivers/acpi/wmi.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c index efacc9f8bfe3..c33b1c6e93b1 100644 --- a/drivers/acpi/wmi.c +++ b/drivers/acpi/wmi.c @@ -293,7 +293,7 @@ struct acpi_buffer *out) { struct guid_block *block = NULL; struct wmi_block *wblock = NULL; - acpi_handle handle; + acpi_handle handle, wc_handle; acpi_status status, wc_status = AE_ERROR; struct acpi_object_list input, wc_input; union acpi_object wc_params[1], wq_params[1]; @@ -338,8 +338,10 @@ struct acpi_buffer *out) * expensive, but have no corresponding WCxx method. So we * should not fail if this happens. */ - wc_status = acpi_evaluate_object(handle, wc_method, - &wc_input, NULL); + wc_status = acpi_get_handle(handle, wc_method, &wc_handle); + if (ACPI_SUCCESS(wc_status)) + wc_status = acpi_evaluate_object(handle, wc_method, + &wc_input, NULL); } strcpy(method, "WQ"); @@ -351,7 +353,7 @@ struct acpi_buffer *out) * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if * the WQxx method failed - we should disable collection anyway. */ - if ((block->flags & ACPI_WMI_EXPENSIVE) && wc_status) { + if ((block->flags & ACPI_WMI_EXPENSIVE) && ACPI_SUCCESS(wc_status)) { wc_params[0].integer.value = 0; status = acpi_evaluate_object(handle, wc_method, &wc_input, NULL); -- cgit v1.2.2 From 5ea3a7480606cef06321cd85bc5113c72d2c7c68 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Tue, 11 Mar 2008 17:55:27 -0700 Subject: [TCP]: Prevent sending past receiver window with TSO (at last skb) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With TSO it was possible to send past the receiver window when the skb to be sent was the last in the write queue while the receiver window is the limiting factor. One can notice that there's a loophole in the tcp_mss_split_point that lacked a receiver window check for the tcp_write_queue_tail() if also cwnd was smaller than the full skb. Noticed by Thomas Gleixner in form of "Treason uncloaked! Peer ... shrinks window .... Repaired." messages (the peer didn't actually shrink its window as the message suggests, we had just sent something past it without a permission to do so). Signed-off-by: Ilpo Järvinen Tested-by: Thomas Gleixner Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index ed750f9ceb07..01578f544ad6 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1035,6 +1035,13 @@ static void tcp_cwnd_validate(struct sock *sk) * introducing MSS oddities to segment boundaries. In rare cases where * mss_now != mss_cache, we will request caller to create a small skb * per input skb which could be mostly avoided here (if desired). + * + * We explicitly want to create a request for splitting write queue tail + * to a small skb for Nagle purposes while avoiding unnecessary modulos, + * thus all the complexity (cwnd_len is always MSS multiple which we + * return whenever allowed by the other factors). Basically we need the + * modulo only when the receiver window alone is the limiting factor or + * when we would be allowed to send the split-due-to-Nagle skb fully. */ static unsigned int tcp_mss_split_point(struct sock *sk, struct sk_buff *skb, unsigned int mss_now, unsigned int cwnd) @@ -1048,10 +1055,11 @@ static unsigned int tcp_mss_split_point(struct sock *sk, struct sk_buff *skb, if (likely(cwnd_len <= window && skb != tcp_write_queue_tail(sk))) return cwnd_len; - if (skb == tcp_write_queue_tail(sk) && cwnd_len <= skb->len) + needed = min(skb->len, window); + + if (skb == tcp_write_queue_tail(sk) && cwnd_len <= needed) return cwnd_len; - needed = min(skb->len, window); return needed - needed % mss_now; } -- cgit v1.2.2 From b2211a361a4289c83971f89da53fe2eb9e72769d Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 11 Mar 2008 18:03:35 -0700 Subject: net: fix build with CONFIG_NET=n fs/built-in.o:(.rodata+0x1134): undefined reference to `proc_net_inode_operations' fs/built-in.o:(.rodata+0x1138): undefined reference to `proc_net_operations' Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- fs/proc/base.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/proc/base.c b/fs/proc/base.c index cc43cf0c1fa5..3217774d269f 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2274,7 +2274,9 @@ static const struct pid_entry tgid_base_stuff[] = { DIR("task", S_IRUGO|S_IXUGO, task), DIR("fd", S_IRUSR|S_IXUSR, fd), DIR("fdinfo", S_IRUSR|S_IXUSR, fdinfo), +#ifdef CONFIG_NET DIR("net", S_IRUGO|S_IXUSR, net), +#endif REG("environ", S_IRUSR, environ), INF("auxv", S_IRUSR, pid_auxv), ONE("status", S_IRUGO, pid_status), -- cgit v1.2.2 From 22626216c46f2ec86287e75ea86dd9ac3df54265 Mon Sep 17 00:00:00 2001 From: Chidambar 'ilLogict' Zinnoury Date: Tue, 11 Mar 2008 18:05:02 -0700 Subject: [SCTP]: Fix local_addr deletions during list traversals. Since the lists are circular, we need to explicitely tag the address to be deleted since we might end up freeing the list head instead. This fixes some interesting SCTP crashes. Signed-off-by: Chidambar 'ilLogict' Zinnoury Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/bind_addr.c | 4 +++- net/sctp/ipv6.c | 4 +++- net/sctp/protocol.c | 4 +++- 3 files changed, 9 insertions(+), 3 deletions(-) diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c index a27511ebc4cb..ceefda025e2d 100644 --- a/net/sctp/bind_addr.c +++ b/net/sctp/bind_addr.c @@ -209,6 +209,7 @@ int sctp_add_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *new, int sctp_del_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *del_addr) { struct sctp_sockaddr_entry *addr, *temp; + int found = 0; /* We hold the socket lock when calling this function, * and that acts as a writer synchronizing lock. @@ -216,13 +217,14 @@ int sctp_del_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *del_addr) list_for_each_entry_safe(addr, temp, &bp->address_list, list) { if (sctp_cmp_addr_exact(&addr->a, del_addr)) { /* Found the exact match. */ + found = 1; addr->valid = 0; list_del_rcu(&addr->list); break; } } - if (addr && !addr->valid) { + if (found) { call_rcu(&addr->rcu, sctp_local_addr_free); SCTP_DBG_OBJCNT_DEC(addr); return 0; diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index 87f940587d5f..9aa0733aee87 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -89,6 +89,7 @@ static int sctp_inet6addr_event(struct notifier_block *this, unsigned long ev, struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)ptr; struct sctp_sockaddr_entry *addr = NULL; struct sctp_sockaddr_entry *temp; + int found = 0; switch (ev) { case NETDEV_UP: @@ -111,13 +112,14 @@ static int sctp_inet6addr_event(struct notifier_block *this, unsigned long ev, &sctp_local_addr_list, list) { if (ipv6_addr_equal(&addr->a.v6.sin6_addr, &ifa->addr)) { + found = 1; addr->valid = 0; list_del_rcu(&addr->list); break; } } spin_unlock_bh(&sctp_local_addr_lock); - if (addr && !addr->valid) + if (found) call_rcu(&addr->rcu, sctp_local_addr_free); break; } diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 688546dccd82..ad0a4069b95b 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -628,6 +628,7 @@ static int sctp_inetaddr_event(struct notifier_block *this, unsigned long ev, struct in_ifaddr *ifa = (struct in_ifaddr *)ptr; struct sctp_sockaddr_entry *addr = NULL; struct sctp_sockaddr_entry *temp; + int found = 0; switch (ev) { case NETDEV_UP: @@ -647,13 +648,14 @@ static int sctp_inetaddr_event(struct notifier_block *this, unsigned long ev, list_for_each_entry_safe(addr, temp, &sctp_local_addr_list, list) { if (addr->a.v4.sin_addr.s_addr == ifa->ifa_local) { + found = 1; addr->valid = 0; list_del_rcu(&addr->list); break; } } spin_unlock_bh(&sctp_local_addr_lock); - if (addr && !addr->valid) + if (found) call_rcu(&addr->rcu, sctp_local_addr_free); break; } -- cgit v1.2.2 From 4200406b8fbbf309f4fffb339bd16c4553ae0c30 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 11 Mar 2008 18:35:20 -0700 Subject: IPoIB/cm: Set tx_wr.num_sge in connected mode post_send() Commit 7143740d ("IPoIB: Add send gather support") made it possible for tx_wr.num_sge to be != 1 -- this happens if send gather support is enabled. However, the code in the connected mode post_send() function assumes the old invariant, namely that tx_wr.num_sge is always 1. Fix this by explicitly setting tx_wr.num_sge to 1 in the CM post_send(). Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 52b1bebfa744..4e8d0281f8bc 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -637,6 +637,7 @@ static inline int post_send(struct ipoib_dev_priv *priv, priv->tx_sge[0].addr = addr; priv->tx_sge[0].length = len; + priv->tx_wr.num_sge = 1; priv->tx_wr.wr_id = wr_id | IPOIB_OP_CM; return ib_post_send(tx->qp, &priv->tx_wr, &bad_wr); -- cgit v1.2.2 From 7c0ea45be4f114d85ee35caeead8e1660699c46f Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 11 Mar 2008 16:56:47 +0800 Subject: ACPI: Ignore _BQC object when registering backlight device According to acpi spec , the objects of _BCL and _BCM are required if integrated LCD is present and supports brightness level .The _BQC is the optional object. So the _BQC object is ignored when the backlight device is registered in ACPI video driver. http://bugzilla.kernel.org/show_bug.cgi?id=10206 Signed-off-by: Zhao Yakui Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 12cce69b5441..ace958cb3894 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -713,7 +713,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) kfree(obj); - if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){ + if (device->cap._BCL && device->cap._BCM && max_level > 0) { int result; static int count = 0; char *name; -- cgit v1.2.2 From a82f7119fd940c1505fc9fdf93d835fa52bc075d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 12 Mar 2008 00:34:57 +0100 Subject: Hibernation: Fix mark_nosave_pages() There is a problem in the hibernation code that triggers on some NUMA systems on which pfn_valid() returns 'true' for some PFNs that don't belong to any zone. Namely, there is a BUG_ON() in memory_bm_find_bit() that triggers for PFNs not belonging to any zone and passing the pfn_valid() test. On the affected systems it triggers when we mark PFNs reported by the platform as not saveable, because the PFNs in question belong to a region mapped directly using iorepam() (i.e. the ACPI data area) and they pass the pfn_valid() test. Modify memory_bm_find_bit() so that it returns an error if given PFN doesn't belong to any zone instead of crashing the kernel and ignore the result returned by it in mark_nosave_pages(), while marking the "nosave" memory regions. This doesn't affect the hibernation functionality, as we won't touch the PFNs in question anyway. http://bugzilla.kernel.org/show_bug.cgi?id=9966 . Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- kernel/power/snapshot.c | 41 ++++++++++++++++++++++++++++++++++------- 1 file changed, 34 insertions(+), 7 deletions(-) diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index 72a020cabb4c..5f91a07c4eac 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -447,7 +447,7 @@ static void memory_bm_free(struct memory_bitmap *bm, int clear_nosave_free) * of @bm->cur_zone_bm are updated. */ -static void memory_bm_find_bit(struct memory_bitmap *bm, unsigned long pfn, +static int memory_bm_find_bit(struct memory_bitmap *bm, unsigned long pfn, void **addr, unsigned int *bit_nr) { struct zone_bitmap *zone_bm; @@ -461,7 +461,8 @@ static void memory_bm_find_bit(struct memory_bitmap *bm, unsigned long pfn, while (pfn < zone_bm->start_pfn || pfn >= zone_bm->end_pfn) { zone_bm = zone_bm->next; - BUG_ON(!zone_bm); + if (!zone_bm) + return -EFAULT; } bm->cur.zone_bm = zone_bm; } @@ -479,23 +480,40 @@ static void memory_bm_find_bit(struct memory_bitmap *bm, unsigned long pfn, pfn -= bb->start_pfn; *bit_nr = pfn % BM_BITS_PER_CHUNK; *addr = bb->data + pfn / BM_BITS_PER_CHUNK; + return 0; } static void memory_bm_set_bit(struct memory_bitmap *bm, unsigned long pfn) { void *addr; unsigned int bit; + int error; - memory_bm_find_bit(bm, pfn, &addr, &bit); + error = memory_bm_find_bit(bm, pfn, &addr, &bit); + BUG_ON(error); set_bit(bit, addr); } +static int mem_bm_set_bit_check(struct memory_bitmap *bm, unsigned long pfn) +{ + void *addr; + unsigned int bit; + int error; + + error = memory_bm_find_bit(bm, pfn, &addr, &bit); + if (!error) + set_bit(bit, addr); + return error; +} + static void memory_bm_clear_bit(struct memory_bitmap *bm, unsigned long pfn) { void *addr; unsigned int bit; + int error; - memory_bm_find_bit(bm, pfn, &addr, &bit); + error = memory_bm_find_bit(bm, pfn, &addr, &bit); + BUG_ON(error); clear_bit(bit, addr); } @@ -503,8 +521,10 @@ static int memory_bm_test_bit(struct memory_bitmap *bm, unsigned long pfn) { void *addr; unsigned int bit; + int error; - memory_bm_find_bit(bm, pfn, &addr, &bit); + error = memory_bm_find_bit(bm, pfn, &addr, &bit); + BUG_ON(error); return test_bit(bit, addr); } @@ -709,8 +729,15 @@ static void mark_nosave_pages(struct memory_bitmap *bm) region->end_pfn << PAGE_SHIFT); for (pfn = region->start_pfn; pfn < region->end_pfn; pfn++) - if (pfn_valid(pfn)) - memory_bm_set_bit(bm, pfn); + if (pfn_valid(pfn)) { + /* + * It is safe to ignore the result of + * mem_bm_set_bit_check() here, since we won't + * touch the PFNs for which the error is + * returned anyway. + */ + mem_bm_set_bit_check(bm, pfn); + } } } -- cgit v1.2.2 From 391df5dce30a5aab477b9e55ea65a3e83bae96b1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 11 Mar 2008 13:45:15 -0700 Subject: ACPI: add _PRT quirks to work around broken firmware This patch works around incorrect _PRT (PCI interrupt routing) information from firmware. This does not fix any regressions and can wait for the next kernel release. On the Medion MD9580-F laptop, the BIOS says the builtin RTL8139 NIC interrupt at 00:09.0[A] is connected to \_SB.PCI0.ISA.LNKA, but it's really connected to \_SB.PCI0.ISA.LNKB. Before this patch, the workaround was to use "pci=routeirq". More details at http://bugzilla.kernel.org/show_bug.cgi?id=4773. On the Dell OptiPlex GX1, the BIOS says the PCI slot interrupt 00:0d[A] is connected to LNKB, but it's really connected to LNKA. Before this patch, the workaround was to use "pci=routeirq". Pierre Ossman tested a previous version of this patch and confirmed that it fixed the problem. More details at http://bugzilla.kernel.org/show_bug.cgi?id=5044. On the HP t5710 thin client, the BIOS says the builtin Radeon video interrupt at 01:00[A] is connected to LNK1, but it's really connected to LNK3. The previous workaround was to use a custom DSDT. I tested this patch and verified that it fixes the problem. More details at http://bugzilla.kernel.org/show_bug.cgi?id=10138. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/pci_irq.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index 7f19859580c7..7af414a3c63e 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -25,6 +25,7 @@ */ +#include #include #include #include @@ -76,6 +77,101 @@ static struct acpi_prt_entry *acpi_pci_irq_find_prt_entry(int segment, return NULL; } +/* http://bugzilla.kernel.org/show_bug.cgi?id=4773 */ +static struct dmi_system_id medion_md9580[] = { + { + .ident = "Medion MD9580-F laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"), + DMI_MATCH(DMI_PRODUCT_NAME, "A555"), + }, + }, + { } +}; + +/* http://bugzilla.kernel.org/show_bug.cgi?id=5044 */ +static struct dmi_system_id dell_optiplex[] = { + { + .ident = "Dell Optiplex GX1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX1 600S+"), + }, + }, + { } +}; + +/* http://bugzilla.kernel.org/show_bug.cgi?id=10138 */ +static struct dmi_system_id hp_t5710[] = { + { + .ident = "HP t5710", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "hp t5000 series"), + DMI_MATCH(DMI_BOARD_NAME, "098Ch"), + }, + }, + { } +}; + +struct prt_quirk { + struct dmi_system_id *system; + unsigned int segment; + unsigned int bus; + unsigned int device; + unsigned char pin; + char *source; /* according to BIOS */ + char *actual_source; +}; + +/* + * These systems have incorrect _PRT entries. The BIOS claims the PCI + * interrupt at the listed segment/bus/device/pin is connected to the first + * link device, but it is actually connected to the second. + */ +static struct prt_quirk prt_quirks[] = { + { medion_md9580, 0, 0, 9, 'A', + "\\_SB_.PCI0.ISA.LNKA", + "\\_SB_.PCI0.ISA.LNKB"}, + { dell_optiplex, 0, 0, 0xd, 'A', + "\\_SB_.LNKB", + "\\_SB_.LNKA"}, + { hp_t5710, 0, 0, 1, 'A', + "\\_SB_.PCI0.LNK1", + "\\_SB_.PCI0.LNK3"}, +}; + +static void +do_prt_fixups(struct acpi_prt_entry *entry, struct acpi_pci_routing_table *prt) +{ + int i; + struct prt_quirk *quirk; + + for (i = 0; i < ARRAY_SIZE(prt_quirks); i++) { + quirk = &prt_quirks[i]; + + /* All current quirks involve link devices, not GSIs */ + if (!prt->source) + continue; + + if (dmi_check_system(quirk->system) && + entry->id.segment == quirk->segment && + entry->id.bus == quirk->bus && + entry->id.device == quirk->device && + entry->pin + 'A' == quirk->pin && + !strcmp(prt->source, quirk->source) && + strlen(prt->source) >= strlen(quirk->actual_source)) { + printk(KERN_WARNING PREFIX "firmware reports " + "%04x:%02x:%02x[%c] connected to %s; " + "changing to %s\n", + entry->id.segment, entry->id.bus, + entry->id.device, 'A' + entry->pin, + prt->source, quirk->actual_source); + strcpy(prt->source, quirk->actual_source); + } + } +} + static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus, struct acpi_pci_routing_table *prt) @@ -96,6 +192,8 @@ acpi_pci_irq_add_entry(acpi_handle handle, entry->id.function = prt->address & 0xFFFF; entry->pin = prt->pin; + do_prt_fixups(entry, prt); + /* * Type 1: Dynamic * --------------- -- cgit v1.2.2 From b6a163875935ce8e8e85901a7f2b68f7a314d914 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Wed, 12 Mar 2008 01:06:24 +0100 Subject: ACPICA: Warn if packages with invalid references are evaluated And return an error to avoid NULL pointer access by the caller Lin Ming's patch avoids corrupted mem access when BIOS has invalid references included, the handle is now zero instead of corrupted. Signed-off-by: Thomas Renninger Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/utils.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index eba55b7d6c95..44ea60cf21c0 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -407,6 +407,12 @@ acpi_evaluate_reference(acpi_handle handle, break; } + if (!element->reference.handle) { + printk(KERN_WARNING PREFIX "Invalid reference in" + " package %s\n", pathname); + status = AE_NULL_ENTRY; + break; + } /* Get the acpi_handle. */ list->handles[i] = element->reference.handle; -- cgit v1.2.2 From a09a20b526fde0611b49b76521e3c546a47216a5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Mar 2008 13:41:26 -0800 Subject: laptops: move laptop-mode.txt to Documentation/laptops/ Move laptop-mode.txt into the laptops/ sub-directory to consolidate laptop doc files there. Update references to the file's location. Signed-off-by: Randy Dunlap Signed-off-by: Len Brown --- Documentation/00-INDEX | 2 - Documentation/filesystems/proc.txt | 4 +- Documentation/laptop-mode.txt | 950 ---------------------------------- Documentation/laptops/00-INDEX | 2 + Documentation/laptops/laptop-mode.txt | 950 ++++++++++++++++++++++++++++++++++ 5 files changed, 954 insertions(+), 954 deletions(-) delete mode 100644 Documentation/laptop-mode.txt create mode 100644 Documentation/laptops/laptop-mode.txt diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 042073f656e5..1d51c0c57811 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -225,8 +225,6 @@ kprobes.txt - documents the kernel probes debugging feature. kref.txt - docs on adding reference counters (krefs) to kernel objects. -laptop-mode.txt - - how to conserve battery power using laptop-mode. laptops/ - directory with laptop related info and laptop driver documentation. ldm.txt diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 5681e2fa1496..518ebe609e2b 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1506,13 +1506,13 @@ laptop_mode ----------- laptop_mode is a knob that controls "laptop mode". All the things that are -controlled by this knob are discussed in Documentation/laptop-mode.txt. +controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt. block_dump ---------- block_dump enables block I/O debugging when set to a nonzero value. More -information on block I/O debugging is in Documentation/laptop-mode.txt. +information on block I/O debugging is in Documentation/laptops/laptop-mode.txt. swap_token_timeout ------------------ diff --git a/Documentation/laptop-mode.txt b/Documentation/laptop-mode.txt deleted file mode 100644 index eeedee11c8c2..000000000000 --- a/Documentation/laptop-mode.txt +++ /dev/null @@ -1,950 +0,0 @@ -How to conserve battery power using laptop-mode ------------------------------------------------ - -Document Author: Bart Samwel (bart@samwel.tk) -Date created: January 2, 2004 -Last modified: December 06, 2004 - -Introduction ------------- - -Laptop mode is used to minimize the time that the hard disk needs to be spun up, -to conserve battery power on laptops. It has been reported to cause significant -power savings. - -Contents --------- - -* Introduction -* Installation -* Caveats -* The Details -* Tips & Tricks -* Control script -* ACPI integration -* Monitoring tool - - -Installation ------------- - -To use laptop mode, you don't need to set any kernel configuration options -or anything. Simply install all the files included in this document, and -laptop mode will automatically be started when you're on battery. For -your convenience, a tarball containing an installer can be downloaded at: - -http://www.samwel.tk/laptop_mode/laptop_mode/ - -To configure laptop mode, you need to edit the configuration file, which is -located in /etc/default/laptop-mode on Debian-based systems, or in -/etc/sysconfig/laptop-mode on other systems. - -Unfortunately, automatic enabling of laptop mode does not work for -laptops that don't have ACPI. On those laptops, you need to start laptop -mode manually. To start laptop mode, run "laptop_mode start", and to -stop it, run "laptop_mode stop". (Note: The laptop mode tools package now -has experimental support for APM, you might want to try that first.) - - -Caveats -------- - -* The downside of laptop mode is that you have a chance of losing up to 10 - minutes of work. If you cannot afford this, don't use it! The supplied ACPI - scripts automatically turn off laptop mode when the battery almost runs out, - so that you won't lose any data at the end of your battery life. - -* Most desktop hard drives have a very limited lifetime measured in spindown - cycles, typically about 50.000 times (it's usually listed on the spec sheet). - Check your drive's rating, and don't wear down your drive's lifetime if you - don't need to. - -* If you mount some of your ext3/reiserfs filesystems with the -n option, then - the control script will not be able to remount them correctly. You must set - DO_REMOUNTS=0 in the control script, otherwise it will remount them with the - wrong options -- or it will fail because it cannot write to /etc/mtab. - -* If you have your filesystems listed as type "auto" in fstab, like I did, then - the control script will not recognize them as filesystems that need remounting. - You must list the filesystems with their true type instead. - -* It has been reported that some versions of the mutt mail client use file access - times to determine whether a folder contains new mail. If you use mutt and - experience this, you must disable the noatime remounting by setting the option - DO_REMOUNT_NOATIME to 0 in the configuration file. - - -The Details ------------ - -Laptop mode is controlled by the knob /proc/sys/vm/laptop_mode. This knob is -present for all kernels that have the laptop mode patch, regardless of any -configuration options. When the knob is set, any physical disk I/O (that might -have caused the hard disk to spin up) causes Linux to flush all dirty blocks. The -result of this is that after a disk has spun down, it will not be spun up -anymore to write dirty blocks, because those blocks had already been written -immediately after the most recent read operation. The value of the laptop_mode -knob determines the time between the occurrence of disk I/O and when the flush -is triggered. A sensible value for the knob is 5 seconds. Setting the knob to -0 disables laptop mode. - -To increase the effectiveness of the laptop_mode strategy, the laptop_mode -control script increases dirty_expire_centisecs and dirty_writeback_centisecs in -/proc/sys/vm to about 10 minutes (by default), which means that pages that are -dirtied are not forced to be written to disk as often. The control script also -changes the dirty background ratio, so that background writeback of dirty pages -is not done anymore. Combined with a higher commit value (also 10 minutes) for -ext3 or ReiserFS filesystems (also done automatically by the control script), -this results in concentration of disk activity in a small time interval which -occurs only once every 10 minutes, or whenever the disk is forced to spin up by -a cache miss. The disk can then be spun down in the periods of inactivity. - -If you want to find out which process caused the disk to spin up, you can -gather information by setting the flag /proc/sys/vm/block_dump. When this flag -is set, Linux reports all disk read and write operations that take place, and -all block dirtyings done to files. This makes it possible to debug why a disk -needs to spin up, and to increase battery life even more. The output of -block_dump is written to the kernel output, and it can be retrieved using -"dmesg". When you use block_dump and your kernel logging level also includes -kernel debugging messages, you probably want to turn off klogd, otherwise -the output of block_dump will be logged, causing disk activity that is not -normally there. - - -Configuration -------------- - -The laptop mode configuration file is located in /etc/default/laptop-mode on -Debian-based systems, or in /etc/sysconfig/laptop-mode on other systems. It -contains the following options: - -MAX_AGE: - -Maximum time, in seconds, of hard drive spindown time that you are -comfortable with. Worst case, it's possible that you could lose this -amount of work if your battery fails while you're in laptop mode. - -MINIMUM_BATTERY_MINUTES: - -Automatically disable laptop mode if the remaining number of minutes of -battery power is less than this value. Default is 10 minutes. - -AC_HD/BATT_HD: - -The idle timeout that should be set on your hard drive when laptop mode -is active (BATT_HD) and when it is not active (AC_HD). The defaults are -20 seconds (value 4) for BATT_HD and 2 hours (value 244) for AC_HD. The -possible values are those listed in the manual page for "hdparm" for the -"-S" option. - -HD: - -The devices for which the spindown timeout should be adjusted by laptop mode. -Default is /dev/hda. If you specify multiple devices, separate them by a space. - -READAHEAD: - -Disk readahead, in 512-byte sectors, while laptop mode is active. A large -readahead can prevent disk accesses for things like executable pages (which are -loaded on demand while the application executes) and sequentially accessed data -(MP3s). - -DO_REMOUNTS: - -The control script automatically remounts any mounted journaled filesystems -with appropriate commit interval options. When this option is set to 0, this -feature is disabled. - -DO_REMOUNT_NOATIME: - -When remounting, should the filesystems be remounted with the noatime option? -Normally, this is set to "1" (enabled), but there may be programs that require -access time recording. - -DIRTY_RATIO: - -The percentage of memory that is allowed to contain "dirty" or unsaved data -before a writeback is forced, while laptop mode is active. Corresponds to -the /proc/sys/vm/dirty_ratio sysctl. - -DIRTY_BACKGROUND_RATIO: - -The percentage of memory that is allowed to contain "dirty" or unsaved data -after a forced writeback is done due to an exceeding of DIRTY_RATIO. Set -this nice and low. This corresponds to the /proc/sys/vm/dirty_background_ratio -sysctl. - -Note that the behaviour of dirty_background_ratio is quite different -when laptop mode is active and when it isn't. When laptop mode is inactive, -dirty_background_ratio is the threshold percentage at which background writeouts -start taking place. When laptop mode is active, however, background writeouts -are disabled, and the dirty_background_ratio only determines how much writeback -is done when dirty_ratio is reached. - -DO_CPU: - -Enable CPU frequency scaling when in laptop mode. (Requires CPUFreq to be setup. -See Documentation/cpu-freq/user-guide.txt for more info. Disabled by default.) - -CPU_MAXFREQ: - -When on battery, what is the maximum CPU speed that the system should use? Legal -values are "slowest" for the slowest speed that your CPU is able to operate at, -or a value listed in /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies. - - -Tips & Tricks -------------- - -* Bartek Kania reports getting up to 50 minutes of extra battery life (on top - of his regular 3 to 3.5 hours) using a spindown time of 5 seconds (BATT_HD=1). - -* You can spin down the disk while playing MP3, by setting disk readahead - to 8MB (READAHEAD=16384). Effectively, the disk will read a complete MP3 at - once, and will then spin down while the MP3 is playing. (Thanks to Bartek - Kania.) - -* Drew Scott Daniels observed: "I don't know why, but when I decrease the number - of colours that my display uses it consumes less battery power. I've seen - this on powerbooks too. I hope that this is a piece of information that - might be useful to the Laptop Mode patch or it's users." - -* In syslog.conf, you can prefix entries with a dash ``-'' to omit syncing the - file after every logging. When you're using laptop-mode and your disk doesn't - spin down, this is a likely culprit. - -* Richard Atterer observed that laptop mode does not work well with noflushd - (http://noflushd.sourceforge.net/), it seems that noflushd prevents laptop-mode - from doing its thing. - -* If you're worried about your data, you might want to consider using a USB - memory stick or something like that as a "working area". (Be aware though - that flash memory can only handle a limited number of writes, and overuse - may wear out your memory stick pretty quickly. Do _not_ use journalling - filesystems on flash memory sticks.) - - -Configuration file for control and ACPI battery scripts -------------------------------------------------------- - -This allows the tunables to be changed for the scripts via an external -configuration file - -It should be installed as /etc/default/laptop-mode on Debian, and as -/etc/sysconfig/laptop-mode on Red Hat, SUSE, Mandrake, and other work-alikes. - ---------------------CONFIG FILE BEGIN------------------------------------------- -# Maximum time, in seconds, of hard drive spindown time that you are -# comfortable with. Worst case, it's possible that you could lose this -# amount of work if your battery fails you while in laptop mode. -#MAX_AGE=600 - -# Automatically disable laptop mode when the number of minutes of battery -# that you have left goes below this threshold. -MINIMUM_BATTERY_MINUTES=10 - -# Read-ahead, in 512-byte sectors. You can spin down the disk while playing MP3/OGG -# by setting the disk readahead to 8MB (READAHEAD=16384). Effectively, the disk -# will read a complete MP3 at once, and will then spin down while the MP3/OGG is -# playing. -#READAHEAD=4096 - -# Shall we remount journaled fs. with appropriate commit interval? (1=yes) -#DO_REMOUNTS=1 - -# And shall we add the "noatime" option to that as well? (1=yes) -#DO_REMOUNT_NOATIME=1 - -# Dirty synchronous ratio. At this percentage of dirty pages the process -# which -# calls write() does its own writeback -#DIRTY_RATIO=40 - -# -# Allowed dirty background ratio, in percent. Once DIRTY_RATIO has been -# exceeded, the kernel will wake pdflush which will then reduce the amount -# of dirty memory to dirty_background_ratio. Set this nice and low, so once -# some writeout has commenced, we do a lot of it. -# -#DIRTY_BACKGROUND_RATIO=5 - -# kernel default dirty buffer age -#DEF_AGE=30 -#DEF_UPDATE=5 -#DEF_DIRTY_BACKGROUND_RATIO=10 -#DEF_DIRTY_RATIO=40 -#DEF_XFS_AGE_BUFFER=15 -#DEF_XFS_SYNC_INTERVAL=30 -#DEF_XFS_BUFD_INTERVAL=1 - -# This must be adjusted manually to the value of HZ in the running kernel -# on 2.4, until the XFS people change their 2.4 external interfaces to work in -# centisecs. This can be automated, but it's a work in progress that still -# needs# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for -# external interfaces, and that is currently always set to 100. So you don't -# need to change this on 2.6. -#XFS_HZ=100 - -# Should the maximum CPU frequency be adjusted down while on battery? -# Requires CPUFreq to be setup. -# See Documentation/cpu-freq/user-guide.txt for more info -#DO_CPU=0 - -# When on battery what is the maximum CPU speed that the system should -# use? Legal values are "slowest" for the slowest speed that your -# CPU is able to operate at, or a value listed in: -# /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies -# Only applicable if DO_CPU=1. -#CPU_MAXFREQ=slowest - -# Idle timeout for your hard drive (man hdparm for valid values, -S option) -# Default is 2 hours on AC (AC_HD=244) and 20 seconds for battery (BATT_HD=4). -#AC_HD=244 -#BATT_HD=4 - -# The drives for which to adjust the idle timeout. Separate them by a space, -# e.g. HD="/dev/hda /dev/hdb". -#HD="/dev/hda" - -# Set the spindown timeout on a hard drive? -#DO_HD=1 - ---------------------CONFIG FILE END--------------------------------------------- - - -Control script --------------- - -Please note that this control script works for the Linux 2.4 and 2.6 series (thanks -to Kiko Piris). - ---------------------CONTROL SCRIPT BEGIN---------------------------------------- -#!/bin/bash - -# start or stop laptop_mode, best run by a power management daemon when -# ac gets connected/disconnected from a laptop -# -# install as /sbin/laptop_mode -# -# Contributors to this script: Kiko Piris -# Bart Samwel -# Micha Feigin -# Andrew Morton -# Herve Eychenne -# Dax Kelson -# -# Original Linux 2.4 version by: Jens Axboe - -############################################################################# - -# Source config -if [ -f /etc/default/laptop-mode ] ; then - # Debian - . /etc/default/laptop-mode -elif [ -f /etc/sysconfig/laptop-mode ] ; then - # Others - . /etc/sysconfig/laptop-mode -fi - -# Don't raise an error if the config file is incomplete -# set defaults instead: - -# Maximum time, in seconds, of hard drive spindown time that you are -# comfortable with. Worst case, it's possible that you could lose this -# amount of work if your battery fails you while in laptop mode. -MAX_AGE=${MAX_AGE:-'600'} - -# Read-ahead, in kilobytes -READAHEAD=${READAHEAD:-'4096'} - -# Shall we remount journaled fs. with appropriate commit interval? (1=yes) -DO_REMOUNTS=${DO_REMOUNTS:-'1'} - -# And shall we add the "noatime" option to that as well? (1=yes) -DO_REMOUNT_NOATIME=${DO_REMOUNT_NOATIME:-'1'} - -# Shall we adjust the idle timeout on a hard drive? -DO_HD=${DO_HD:-'1'} - -# Adjust idle timeout on which hard drive? -HD="${HD:-'/dev/hda'}" - -# spindown time for HD (hdparm -S values) -AC_HD=${AC_HD:-'244'} -BATT_HD=${BATT_HD:-'4'} - -# Dirty synchronous ratio. At this percentage of dirty pages the process which -# calls write() does its own writeback -DIRTY_RATIO=${DIRTY_RATIO:-'40'} - -# cpu frequency scaling -# See Documentation/cpu-freq/user-guide.txt for more info -DO_CPU=${CPU_MANAGE:-'0'} -CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'} - -# -# Allowed dirty background ratio, in percent. Once DIRTY_RATIO has been -# exceeded, the kernel will wake pdflush which will then reduce the amount -# of dirty memory to dirty_background_ratio. Set this nice and low, so once -# some writeout has commenced, we do a lot of it. -# -DIRTY_BACKGROUND_RATIO=${DIRTY_BACKGROUND_RATIO:-'5'} - -# kernel default dirty buffer age -DEF_AGE=${DEF_AGE:-'30'} -DEF_UPDATE=${DEF_UPDATE:-'5'} -DEF_DIRTY_BACKGROUND_RATIO=${DEF_DIRTY_BACKGROUND_RATIO:-'10'} -DEF_DIRTY_RATIO=${DEF_DIRTY_RATIO:-'40'} -DEF_XFS_AGE_BUFFER=${DEF_XFS_AGE_BUFFER:-'15'} -DEF_XFS_SYNC_INTERVAL=${DEF_XFS_SYNC_INTERVAL:-'30'} -DEF_XFS_BUFD_INTERVAL=${DEF_XFS_BUFD_INTERVAL:-'1'} - -# This must be adjusted manually to the value of HZ in the running kernel -# on 2.4, until the XFS people change their 2.4 external interfaces to work in -# centisecs. This can be automated, but it's a work in progress that still needs -# some fixes. On 2.6 kernels, XFS uses USER_HZ instead of HZ for external -# interfaces, and that is currently always set to 100. So you don't need to -# change this on 2.6. -XFS_HZ=${XFS_HZ:-'100'} - -############################################################################# - -KLEVEL="$(uname -r | - { - IFS='.' read a b c - echo $a.$b - } -)" -case "$KLEVEL" in - "2.4"|"2.6") - ;; - *) - echo "Unhandled kernel version: $KLEVEL ('uname -r' = '$(uname -r)')" >&2 - exit 1 - ;; -esac - -if [ ! -e /proc/sys/vm/laptop_mode ] ; then - echo "Kernel is not patched with laptop_mode patch." >&2 - exit 1 -fi - -if [ ! -w /proc/sys/vm/laptop_mode ] ; then - echo "You do not have enough privileges to enable laptop_mode." >&2 - exit 1 -fi - -# Remove an option (the first parameter) of the form option= from -# a mount options string (the rest of the parameters). -parse_mount_opts () { - OPT="$1" - shift - echo ",$*," | sed \ - -e 's/,'"$OPT"'=[0-9]*,/,/g' \ - -e 's/,,*/,/g' \ - -e 's/^,//' \ - -e 's/,$//' -} - -# Remove an option (the first parameter) without any arguments from -# a mount option string (the rest of the parameters). -parse_nonumber_mount_opts () { - OPT="$1" - shift - echo ",$*," | sed \ - -e 's/,'"$OPT"',/,/g' \ - -e 's/,,*/,/g' \ - -e 's/^,//' \ - -e 's/,$//' -} - -# Find out the state of a yes/no option (e.g. "atime"/"noatime") in -# fstab for a given filesystem, and use this state to replace the -# value of the option in another mount options string. The device -# is the first argument, the option name the second, and the default -# value the third. The remainder is the mount options string. -# -# Example: -# parse_yesno_opts_wfstab /dev/hda1 atime atime defaults,noatime -# -# If fstab contains, say, "rw" for this filesystem, then the result -# will be "defaults,atime". -parse_yesno_opts_wfstab () { - L_DEV="$1" - OPT="$2" - DEF_OPT="$3" - shift 3 - L_OPTS="$*" - PARSEDOPTS1="$(parse_nonumber_mount_opts $OPT $L_OPTS)" - PARSEDOPTS1="$(parse_nonumber_mount_opts no$OPT $PARSEDOPTS1)" - # Watch for a default atime in fstab - FSTAB_OPTS="$(awk '$1 == "'$L_DEV'" { print $4 }' /etc/fstab)" - if echo "$FSTAB_OPTS" | grep "$OPT" > /dev/null ; then - # option specified in fstab: extract the value and use it - if echo "$FSTAB_OPTS" | grep "no$OPT" > /dev/null ; then - echo "$PARSEDOPTS1,no$OPT" - else - # no$OPT not found -- so we must have $OPT. - echo "$PARSEDOPTS1,$OPT" - fi - else - # option not specified in fstab -- choose the default. - echo "$PARSEDOPTS1,$DEF_OPT" - fi -} - -# Find out the state of a numbered option (e.g. "commit=NNN") in -# fstab for a given filesystem, and use this state to replace the -# value of the option in another mount options string. The device -# is the first argument, and the option name the second. The -# remainder is the mount options string in which the replacement -# must be done. -# -# Example: -# parse_mount_opts_wfstab /dev/hda1 commit defaults,commit=7 -# -# If fstab contains, say, "commit=3,rw" for this filesystem, then the -# result will be "rw,commit=3". -parse_mount_opts_wfstab () { - L_DEV="$1" - OPT="$2" - shift 2 - L_OPTS="$*" - PARSEDOPTS1="$(parse_mount_opts $OPT $L_OPTS)" - # Watch for a default commit in fstab - FSTAB_OPTS="$(awk '$1 == "'$L_DEV'" { print $4 }' /etc/fstab)" - if echo "$FSTAB_OPTS" | grep "$OPT=" > /dev/null ; then - # option specified in fstab: extract the value, and use it - echo -n "$PARSEDOPTS1,$OPT=" - echo ",$FSTAB_OPTS," | sed \ - -e 's/.*,'"$OPT"'=//' \ - -e 's/,.*//' - else - # option not specified in fstab: set it to 0 - echo "$PARSEDOPTS1,$OPT=0" - fi -} - -deduce_fstype () { - MP="$1" - # My root filesystem unfortunately has - # type "unknown" in /etc/mtab. If we encounter - # "unknown", we try to get the type from fstab. - cat /etc/fstab | - grep -v '^#' | - while read FSTAB_DEV FSTAB_MP FSTAB_FST FSTAB_OPTS FSTAB_DUMP FSTAB_DUMP ; do - if [ "$FSTAB_MP" = "$MP" ]; then - echo $FSTAB_FST - exit 0 - fi - done -} - -if [ $DO_REMOUNT_NOATIME -eq 1 ] ; then - NOATIME_OPT=",noatime" -fi - -case "$1" in - start) - AGE=$((100*$MAX_AGE)) - XFS_AGE=$(($XFS_HZ*$MAX_AGE)) - echo -n "Starting laptop_mode" - - if [ -d /proc/sys/vm/pagebuf ] ; then - # (For 2.4 and early 2.6.) - # This only needs to be set, not reset -- it is only used when - # laptop mode is enabled. - echo $XFS_AGE > /proc/sys/vm/pagebuf/lm_flush_age - echo $XFS_AGE > /proc/sys/fs/xfs/lm_sync_interval - elif [ -f /proc/sys/fs/xfs/lm_age_buffer ] ; then - # (A couple of early 2.6 laptop mode patches had these.) - # The same goes for these. - echo $XFS_AGE > /proc/sys/fs/xfs/lm_age_buffer - echo $XFS_AGE > /proc/sys/fs/xfs/lm_sync_interval - elif [ -f /proc/sys/fs/xfs/age_buffer ] ; then - # (2.6.6) - # But not for these -- they are also used in normal - # operation. - echo $XFS_AGE > /proc/sys/fs/xfs/age_buffer - echo $XFS_AGE > /proc/sys/fs/xfs/sync_interval - elif [ -f /proc/sys/fs/xfs/age_buffer_centisecs ] ; then - # (2.6.7 upwards) - # And not for these either. These are in centisecs, - # not USER_HZ, so we have to use $AGE, not $XFS_AGE. - echo $AGE > /proc/sys/fs/xfs/age_buffer_centisecs - echo $AGE > /proc/sys/fs/xfs/xfssyncd_centisecs - echo 3000 > /proc/sys/fs/xfs/xfsbufd_centisecs - fi - - case "$KLEVEL" in - "2.4") - echo 1 > /proc/sys/vm/laptop_mode - echo "30 500 0 0 $AGE $AGE 60 20 0" > /proc/sys/vm/bdflush - ;; - "2.6") - echo 5 > /proc/sys/vm/laptop_mode - echo "$AGE" > /proc/sys/vm/dirty_writeback_centisecs - echo "$AGE" > /proc/sys/vm/dirty_expire_centisecs - echo "$DIRTY_RATIO" > /proc/sys/vm/dirty_ratio - echo "$DIRTY_BACKGROUND_RATIO" > /proc/sys/vm/dirty_background_ratio - ;; - esac - if [ $DO_REMOUNTS -eq 1 ]; then - cat /etc/mtab | while read DEV MP FST OPTS DUMP PASS ; do - PARSEDOPTS="$(parse_mount_opts "$OPTS")" - if [ "$FST" = 'unknown' ]; then - FST=$(deduce_fstype $MP) - fi - case "$FST" in - "ext3"|"reiserfs") - PARSEDOPTS="$(parse_mount_opts commit "$OPTS")" - mount $DEV -t $FST $MP -o remount,$PARSEDOPTS,commit=$MAX_AGE$NOATIME_OPT - ;; - "xfs") - mount $DEV -t $FST $MP -o remount,$OPTS$NOATIME_OPT - ;; - esac - if [ -b $DEV ] ; then - blockdev --setra $(($READAHEAD * 2)) $DEV - fi - done - fi - if [ $DO_HD -eq 1 ] ; then - for THISHD in $HD ; do - /sbin/hdparm -S $BATT_HD $THISHD > /dev/null 2>&1 - /sbin/hdparm -B 1 $THISHD > /dev/null 2>&1 - done - fi - if [ $DO_CPU -eq 1 -a -e /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq ]; then - if [ $CPU_MAXFREQ = 'slowest' ]; then - CPU_MAXFREQ=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq` - fi - echo $CPU_MAXFREQ > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq - fi - echo "." - ;; - stop) - U_AGE=$((100*$DEF_UPDATE)) - B_AGE=$((100*$DEF_AGE)) - echo -n "Stopping laptop_mode" - echo 0 > /proc/sys/vm/laptop_mode - if [ -f /proc/sys/fs/xfs/age_buffer -a ! -f /proc/sys/fs/xfs/lm_age_buffer ] ; then - # These need to be restored, if there are no lm_*. - echo $(($XFS_HZ*$DEF_XFS_AGE_BUFFER)) > /proc/sys/fs/xfs/age_buffer - echo $(($XFS_HZ*$DEF_XFS_SYNC_INTERVAL)) > /proc/sys/fs/xfs/sync_interval - elif [ -f /proc/sys/fs/xfs/age_buffer_centisecs ] ; then - # These need to be restored as well. - echo $((100*$DEF_XFS_AGE_BUFFER)) > /proc/sys/fs/xfs/age_buffer_centisecs - echo $((100*$DEF_XFS_SYNC_INTERVAL)) > /proc/sys/fs/xfs/xfssyncd_centisecs - echo $((100*$DEF_XFS_BUFD_INTERVAL)) > /proc/sys/fs/xfs/xfsbufd_centisecs - fi - case "$KLEVEL" in - "2.4") - echo "30 500 0 0 $U_AGE $B_AGE 60 20 0" > /proc/sys/vm/bdflush - ;; - "2.6") - echo "$U_AGE" > /proc/sys/vm/dirty_writeback_centisecs - echo "$B_AGE" > /proc/sys/vm/dirty_expire_centisecs - echo "$DEF_DIRTY_RATIO" > /proc/sys/vm/dirty_ratio - echo "$DEF_DIRTY_BACKGROUND_RATIO" > /proc/sys/vm/dirty_background_ratio - ;; - esac - if [ $DO_REMOUNTS -eq 1 ] ; then - cat /etc/mtab | while read DEV MP FST OPTS DUMP PASS ; do - # Reset commit and atime options to defaults. - if [ "$FST" = 'unknown' ]; then - FST=$(deduce_fstype $MP) - fi - case "$FST" in - "ext3"|"reiserfs") - PARSEDOPTS="$(parse_mount_opts_wfstab $DEV commit $OPTS)" - PARSEDOPTS="$(parse_yesno_opts_wfstab $DEV atime atime $PARSEDOPTS)" - mount $DEV -t $FST $MP -o remount,$PARSEDOPTS - ;; - "xfs") - PARSEDOPTS="$(parse_yesno_opts_wfstab $DEV atime atime $OPTS)" - mount $DEV -t $FST $MP -o remount,$PARSEDOPTS - ;; - esac - if [ -b $DEV ] ; then - blockdev --setra 256 $DEV - fi - done - fi - if [ $DO_HD -eq 1 ] ; then - for THISHD in $HD ; do - /sbin/hdparm -S $AC_HD $THISHD > /dev/null 2>&1 - /sbin/hdparm -B 255 $THISHD > /dev/null 2>&1 - done - fi - if [ $DO_CPU -eq 1 -a -e /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq ]; then - echo `cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq` > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq - fi - echo "." - ;; - *) - echo "Usage: $0 {start|stop}" 2>&1 - exit 1 - ;; - -esac - -exit 0 ---------------------CONTROL SCRIPT END------------------------------------------ - - -ACPI integration ----------------- - -Dax Kelson submitted this so that the ACPI acpid daemon will -kick off the laptop_mode script and run hdparm. The part that -automatically disables laptop mode when the battery is low was -written by Jan Topinski. - ------------------/etc/acpi/events/ac_adapter BEGIN------------------------------ -event=ac_adapter -action=/etc/acpi/actions/ac.sh %e -----------------/etc/acpi/events/ac_adapter END--------------------------------- - - ------------------/etc/acpi/events/battery BEGIN--------------------------------- -event=battery.* -action=/etc/acpi/actions/battery.sh %e -----------------/etc/acpi/events/battery END------------------------------------ - - -----------------/etc/acpi/actions/ac.sh BEGIN----------------------------------- -#!/bin/bash - -# ac on/offline event handler - -status=`awk '/^state: / { print $2 }' /proc/acpi/ac_adapter/$2/state` - -case $status in - "on-line") - /sbin/laptop_mode stop - exit 0 - ;; - "off-line") - /sbin/laptop_mode start - exit 0 - ;; -esac ----------------------------/etc/acpi/actions/ac.sh END-------------------------- - - ----------------------------/etc/acpi/actions/battery.sh BEGIN------------------- -#! /bin/bash - -# Automatically disable laptop mode when the battery almost runs out. - -BATT_INFO=/proc/acpi/battery/$2/state - -if [[ -f /proc/sys/vm/laptop_mode ]] -then - LM=`cat /proc/sys/vm/laptop_mode` - if [[ $LM -gt 0 ]] - then - if [[ -f $BATT_INFO ]] - then - # Source the config file only now that we know we need - if [ -f /etc/default/laptop-mode ] ; then - # Debian - . /etc/default/laptop-mode - elif [ -f /etc/sysconfig/laptop-mode ] ; then - # Others - . /etc/sysconfig/laptop-mode - fi - MINIMUM_BATTERY_MINUTES=${MINIMUM_BATTERY_MINUTES:-'10'} - - ACTION="`cat $BATT_INFO | grep charging | cut -c 26-`" - if [[ ACTION -eq "discharging" ]] - then - PRESENT_RATE=`cat $BATT_INFO | grep "present rate:" | sed "s/.* \([0-9][0-9]* \).*/\1/" ` - REMAINING=`cat $BATT_INFO | grep "remaining capacity:" | sed "s/.* \([0-9][0-9]* \).*/\1/" ` - fi - if (($REMAINING * 60 / $PRESENT_RATE < $MINIMUM_BATTERY_MINUTES)) - then - /sbin/laptop_mode stop - fi - else - logger -p daemon.warning "You are using laptop mode and your battery interface $BATT_INFO is missing. This may lead to loss of data when the battery runs out. Check kernel ACPI support and /proc/acpi/battery folder, and edit /etc/acpi/battery.sh to set BATT_INFO to the correct path." - fi - fi -fi ----------------------------/etc/acpi/actions/battery.sh END-------------------- - - -Monitoring tool ---------------- - -Bartek Kania submitted this, it can be used to measure how much time your disk -spends spun up/down. - ----------------------------dslm.c BEGIN----------------------------------------- -/* - * Simple Disk Sleep Monitor - * by Bartek Kania - * Licenced under the GPL - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef DEBUG -#define D(x) x -#else -#define D(x) -#endif - -int endit = 0; - -/* Check if the disk is in powersave-mode - * Most of the code is stolen from hdparm. - * 1 = active, 0 = standby/sleep, -1 = unknown */ -int check_powermode(int fd) -{ - unsigned char args[4] = {WIN_CHECKPOWERMODE1,0,0,0}; - int state; - - if (ioctl(fd, HDIO_DRIVE_CMD, &args) - && (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */ - && ioctl(fd, HDIO_DRIVE_CMD, &args)) { - if (errno != EIO || args[0] != 0 || args[1] != 0) { - state = -1; /* "unknown"; */ - } else - state = 0; /* "sleeping"; */ - } else { - state = (args[2] == 255) ? 1 : 0; - } - D(printf(" drive state is: %d\n", state)); - - return state; -} - -char *state_name(int i) -{ - if (i == -1) return "unknown"; - if (i == 0) return "sleeping"; - if (i == 1) return "active"; - - return "internal error"; -} - -char *myctime(time_t time) -{ - char *ts = ctime(&time); - ts[strlen(ts) - 1] = 0; - - return ts; -} - -void measure(int fd) -{ - time_t start_time; - int last_state; - time_t last_time; - int curr_state; - time_t curr_time = 0; - time_t time_diff; - time_t active_time = 0; - time_t sleep_time = 0; - time_t unknown_time = 0; - time_t total_time = 0; - int changes = 0; - float tmp; - - printf("Starting measurements\n"); - - last_state = check_powermode(fd); - start_time = last_time = time(0); - printf(" System is in state %s\n\n", state_name(last_state)); - - while(!endit) { - sleep(1); - curr_state = check_powermode(fd); - - if (curr_state != last_state || endit) { - changes++; - curr_time = time(0); - time_diff = curr_time - last_time; - - if (last_state == 1) active_time += time_diff; - else if (last_state == 0) sleep_time += time_diff; - else unknown_time += time_diff; - - last_state = curr_state; - last_time = curr_time; - - printf("%s: State-change to %s\n", myctime(curr_time), - state_name(curr_state)); - } - } - changes--; /* Compensate for SIGINT */ - - total_time = time(0) - start_time; - printf("\nTotal running time: %lus\n", curr_time - start_time); - printf(" State changed %d times\n", changes); - - tmp = (float)sleep_time / (float)total_time * 100; - printf(" Time in sleep state: %lus (%.2f%%)\n", sleep_time, tmp); - tmp = (float)active_time / (float)total_time * 100; - printf(" Time in active state: %lus (%.2f%%)\n", active_time, tmp); - tmp = (float)unknown_time / (float)total_time * 100; - printf(" Time in unknown state: %lus (%.2f%%)\n", unknown_time, tmp); -} - -void ender(int s) -{ - endit = 1; -} - -void usage() -{ - puts("usage: dslm [-w