From a30d46c042c8a17ef25de02f439fbd120ab8a8de Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 20 Oct 2008 23:46:28 +0200 Subject: mfd: twl4030 IRQ handling update - Move it into a separate file; clean and streamline it - Restructure the init code for reuse during secondary dispatch - Support both levels (primary, secondary) of IRQ dispatch - Use a workqueue for irq mask/unmask and trigger configuration Code for two subchips currently share that secondary handler code. One is the power subchip; its IRQs are now handled by this core, courtesy of this patch. The other is the GPIO module, which will be supported through a later patch. There are also minor changes to the header file, mostly related to GPIO support; nothing yet in mainline cares about those. A few references to OMAP-specific symbols are disabled; when they can all be removed, the TWL4030 support ceases being OMAP-specific. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren Signed-off-by: Samuel Ortiz --- drivers/mfd/Makefile | 2 +- drivers/mfd/twl4030-core.c | 421 +------------------------ drivers/mfd/twl4030-irq.c | 743 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/i2c/twl4030.h | 28 +- 4 files changed, 777 insertions(+), 417 deletions(-) create mode 100644 drivers/mfd/twl4030-irq.c diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 68e237b830ad..0acefe8aff87 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -17,7 +17,7 @@ wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o -obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o +obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o obj-$(CONFIG_MFD_CORE) += mfd-core.o diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index fd9a0160202c..dd843c4fbcc7 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -27,15 +27,11 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include #include #include -#include -#include -#include -#include #include #include +#include #include #include @@ -93,26 +89,6 @@ #define twl_has_usb() false #endif -static inline void activate_irq(int irq) -{ -#ifdef CONFIG_ARM - /* ARM requires an extra step to clear IRQ_NOREQUEST, which it - * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. - */ - set_irq_flags(irq, IRQF_VALID); -#else - /* same effect on other architectures */ - set_irq_noprobe(irq); -#endif -} - -/* Primary Interrupt Handler on TWL4030 Registers */ - -/* Register Definitions */ - -#define REG_PIH_ISR_P1 (0x1) -#define REG_PIH_ISR_P2 (0x2) -#define REG_PIH_SIR (0x3) /* Triton Core internal information (BEGIN) */ @@ -175,138 +151,6 @@ static inline void activate_irq(int irq) /*----------------------------------------------------------------------*/ -/** - * struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init - * @mod_no: TWL4030 module number (e.g., TWL4030_MODULE_GPIO) - * @sih_ctrl: address of module SIH_CTRL register - * @reg_cnt: number of IMR/ISR regs - * @imrs: pointer to array of TWL module interrupt mask register indices - * @isrs: pointer to array of TWL module interrupt status register indices - * - * Ties together TWL4030 modules and lists of IMR/ISR registers to mask/clear - * during twl_init_irq(). - */ -struct twl4030_mod_iregs { - const u8 mod_no; - const u8 sih_ctrl; - const u8 reg_cnt; - const u8 *imrs; - const u8 *isrs; -}; - -/* TWL4030 INT module interrupt mask registers */ -static const u8 __initconst twl4030_int_imr_regs[] = { - TWL4030_INT_PWR_IMR1, - TWL4030_INT_PWR_IMR2, -}; - -/* TWL4030 INT module interrupt status registers */ -static const u8 __initconst twl4030_int_isr_regs[] = { - TWL4030_INT_PWR_ISR1, - TWL4030_INT_PWR_ISR2, -}; - -/* TWL4030 INTERRUPTS module interrupt mask registers */ -static const u8 __initconst twl4030_interrupts_imr_regs[] = { - TWL4030_INTERRUPTS_BCIIMR1A, - TWL4030_INTERRUPTS_BCIIMR1B, - TWL4030_INTERRUPTS_BCIIMR2A, - TWL4030_INTERRUPTS_BCIIMR2B, -}; - -/* TWL4030 INTERRUPTS module interrupt status registers */ -static const u8 __initconst twl4030_interrupts_isr_regs[] = { - TWL4030_INTERRUPTS_BCIISR1A, - TWL4030_INTERRUPTS_BCIISR1B, - TWL4030_INTERRUPTS_BCIISR2A, - TWL4030_INTERRUPTS_BCIISR2B, -}; - -/* TWL4030 MADC module interrupt mask registers */ -static const u8 __initconst twl4030_madc_imr_regs[] = { - TWL4030_MADC_IMR1, - TWL4030_MADC_IMR2, -}; - -/* TWL4030 MADC module interrupt status registers */ -static const u8 __initconst twl4030_madc_isr_regs[] = { - TWL4030_MADC_ISR1, - TWL4030_MADC_ISR2, -}; - -/* TWL4030 keypad module interrupt mask registers */ -static const u8 __initconst twl4030_keypad_imr_regs[] = { - TWL4030_KEYPAD_KEYP_IMR1, - TWL4030_KEYPAD_KEYP_IMR2, -}; - -/* TWL4030 keypad module interrupt status registers */ -static const u8 __initconst twl4030_keypad_isr_regs[] = { - TWL4030_KEYPAD_KEYP_ISR1, - TWL4030_KEYPAD_KEYP_ISR2, -}; - -/* TWL4030 GPIO module interrupt mask registers */ -static const u8 __initconst twl4030_gpio_imr_regs[] = { - REG_GPIO_IMR1A, - REG_GPIO_IMR1B, - REG_GPIO_IMR2A, - REG_GPIO_IMR2B, - REG_GPIO_IMR3A, - REG_GPIO_IMR3B, -}; - -/* TWL4030 GPIO module interrupt status registers */ -static const u8 __initconst twl4030_gpio_isr_regs[] = { - REG_GPIO_ISR1A, - REG_GPIO_ISR1B, - REG_GPIO_ISR2A, - REG_GPIO_ISR2B, - REG_GPIO_ISR3A, - REG_GPIO_ISR3B, -}; - -/* TWL4030 modules that have IMR/ISR registers that must be masked/cleared */ -static const struct twl4030_mod_iregs __initconst twl4030_mod_regs[] = { - { - .mod_no = TWL4030_MODULE_INT, - .sih_ctrl = TWL4030_INT_PWR_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_int_imr_regs), - .imrs = twl4030_int_imr_regs, - .isrs = twl4030_int_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_INTERRUPTS, - .sih_ctrl = TWL4030_INTERRUPTS_BCISIHCTRL, - .reg_cnt = ARRAY_SIZE(twl4030_interrupts_imr_regs), - .imrs = twl4030_interrupts_imr_regs, - .isrs = twl4030_interrupts_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_MADC, - .sih_ctrl = TWL4030_MADC_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_madc_imr_regs), - .imrs = twl4030_madc_imr_regs, - .isrs = twl4030_madc_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_KEYPAD, - .sih_ctrl = TWL4030_KEYPAD_KEYP_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_keypad_imr_regs), - .imrs = twl4030_keypad_imr_regs, - .isrs = twl4030_keypad_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_GPIO, - .sih_ctrl = REG_GPIO_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_gpio_imr_regs), - .imrs = twl4030_gpio_imr_regs, - .isrs = twl4030_gpio_isr_regs, - }, -}; - -/*----------------------------------------------------------------*/ - /* is driver active, bound to a chip? */ static bool inuse; @@ -367,33 +211,6 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { /*----------------------------------------------------------------------*/ -/* - * TWL4030 doesn't have PIH mask, hence dummy function for mask - * and unmask of the (eight) interrupts reported at that level ... - * masking is only available from SIH (secondary) modules. - */ - -static void twl4030_i2c_ackirq(unsigned int irq) -{ -} - -static void twl4030_i2c_disableint(unsigned int irq) -{ -} - -static void twl4030_i2c_enableint(unsigned int irq) -{ -} - -static struct irq_chip twl4030_irq_chip = { - .name = "twl4030", - .ack = twl4030_i2c_ackirq, - .mask = twl4030_i2c_disableint, - .unmask = twl4030_i2c_enableint, -}; - -/*----------------------------------------------------------------------*/ - /* Exported Functions */ /** @@ -535,108 +352,11 @@ EXPORT_SYMBOL(twl4030_i2c_read_u8); /*----------------------------------------------------------------------*/ -static unsigned twl4030_irq_base; - -static struct completion irq_event; - -/* - * This thread processes interrupts reported by the Primary Interrupt Handler. - */ -static int twl4030_irq_thread(void *data) -{ - long irq = (long)data; - irq_desc_t *desc = irq_desc + irq; - static unsigned i2c_errors; - const static unsigned max_i2c_errors = 100; - - current->flags |= PF_NOFREEZE; - - while (!kthread_should_stop()) { - int ret; - int module_irq; - u8 pih_isr; - - /* Wait for IRQ, then read PIH irq status (also blocking) */ - wait_for_completion_interruptible(&irq_event); - - ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, - REG_PIH_ISR_P1); - if (ret) { - pr_warning("%s: I2C error %d reading PIH ISR\n", - DRIVER_NAME, ret); - if (++i2c_errors >= max_i2c_errors) { - printk(KERN_ERR "Maximum I2C error count" - " exceeded. Terminating %s.\n", - __func__); - break; - } - complete(&irq_event); - continue; - } - - /* these handlers deal with the relevant SIH irq status */ - local_irq_disable(); - for (module_irq = twl4030_irq_base; - pih_isr; - pih_isr >>= 1, module_irq++) { - if (pih_isr & 0x1) { - irq_desc_t *d = irq_desc + module_irq; - - d->handle_irq(module_irq, d); - } - } - local_irq_enable(); - - desc->chip->unmask(irq); - } - - return 0; -} - /* - * do_twl4030_irq() is the desc->handle method for the twl4030 interrupt. - * This is a chained interrupt, so there is no desc->action method for it. - * Now we need to query the interrupt controller in the twl4030 to determine - * which module is generating the interrupt request. However, we can't do i2c - * transactions in interrupt context, so we must defer that work to a kernel - * thread. All we do here is acknowledge and mask the interrupt and wakeup - * the kernel thread. + * NOTE: We know the first 8 IRQs after pdata->base_irq are + * for the PIH, and the next are for the PWR_INT SIH, since + * that's how twl_init_irq() sets things up. */ -static void do_twl4030_irq(unsigned int irq, irq_desc_t *desc) -{ - const unsigned int cpu = smp_processor_id(); - - /* - * Earlier this was desc->triggered = 1; - */ - desc->status |= IRQ_LEVEL; - - /* - * Acknowledge, clear _AND_ disable the interrupt. - */ - desc->chip->ack(irq); - - if (!desc->depth) { - kstat_cpu(cpu).irqs[irq]++; - - complete(&irq_event); - } -} - -static struct task_struct * __init start_twl4030_irq_thread(long irq) -{ - struct task_struct *thread; - - init_completion(&irq_event); - thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq"); - if (!thread) - pr_err("%s: could not create twl4030 irq %ld thread!\n", - DRIVER_NAME, irq); - - return thread; -} - -/*----------------------------------------------------------------------*/ static int add_children(struct twl4030_platform_data *pdata) { @@ -668,7 +388,7 @@ static int add_children(struct twl4030_platform_data *pdata) if (status == 0) { struct resource r = { - .start = TWL4030_PWRIRQ_CHG_PRES, + .start = pdata->irq_base + 8 + 1, .flags = IORESOURCE_IRQ, }; @@ -817,8 +537,7 @@ static int add_children(struct twl4030_platform_data *pdata) /* RTC module IRQ */ if (status == 0) { struct resource r = { - /* REVISIT don't hard-wire this stuff */ - .start = TWL4030_PWRIRQ_RTC, + .start = pdata->irq_base + 8 + 3, .flags = IORESOURCE_IRQ, }; @@ -863,7 +582,7 @@ static int add_children(struct twl4030_platform_data *pdata) if (status == 0) { struct resource r = { - .start = TWL4030_PWRIRQ_USB_PRES, + .start = pdata->irq_base + 8 + 2, .flags = IORESOURCE_IRQ, }; @@ -965,123 +684,17 @@ static void __init clocks_init(void) /*----------------------------------------------------------------------*/ -/** - * twl4030_i2c_clear_isr - clear TWL4030 SIH ISR regs via read + write - * @mod_no: TWL4030 module number - * @reg: register index to clear - * @cor: value of the _SIH_CTRL.COR bit (1 or 0) - * - * Either reads (cor == 1) or writes (cor == 0) to a TWL4030 interrupt - * status register to ensure that any prior interrupts are cleared. - * Returns the status from the I2C read operation. - */ -static int __init twl4030_i2c_clear_isr(u8 mod_no, u8 reg, u8 cor) -{ - u8 tmp; - - return (cor) ? twl4030_i2c_read_u8(mod_no, &tmp, reg) : - twl4030_i2c_write_u8(mod_no, 0xff, reg); -} - -/** - * twl4030_read_cor_bit - are TWL module ISRs cleared by reads or writes? - * @mod_no: TWL4030 module number - * @reg: register index to clear - * - * Returns 1 if the TWL4030 SIH interrupt status registers (ISRs) for - * the specified TWL module are cleared by reads, or 0 if cleared by - * writes. - */ -static int twl4030_read_cor_bit(u8 mod_no, u8 reg) -{ - u8 tmp = 0; - - WARN_ON(twl4030_i2c_read_u8(mod_no, &tmp, reg) < 0); - - tmp &= TWL4030_SIH_CTRL_COR_MASK; - tmp >>= __ffs(TWL4030_SIH_CTRL_COR_MASK); - - return tmp; -} - -/** - * twl4030_mask_clear_intrs - mask and clear all TWL4030 interrupts - * @t: pointer to twl4030_mod_iregs array - * @t_sz: ARRAY_SIZE(t) (starting at 1) - * - * Mask all TWL4030 interrupt mask registers (IMRs) and clear all - * interrupt status registers (ISRs). No return value, but will WARN if - * any I2C operations fail. - */ -static void __init twl4030_mask_clear_intrs(const struct twl4030_mod_iregs *t, - const u8 t_sz) -{ - int i, j; - - /* - * N.B. - further efficiency is possible here. Eight I2C - * operations on BCI and GPIO modules are avoidable if I2C - * burst read/write transactions were implemented. Would - * probably save about 1ms of boot time and a small amount of - * power. - */ - for (i = 0; i < t_sz; i++) { - const struct twl4030_mod_iregs tmr = t[i]; - int cor; - - /* Are ISRs cleared by reads or writes? */ - cor = twl4030_read_cor_bit(tmr.mod_no, tmr.sih_ctrl); - - for (j = 0; j < tmr.reg_cnt; j++) { - - /* Mask interrupts at the TWL4030 */ - WARN_ON(twl4030_i2c_write_u8(tmr.mod_no, 0xff, - tmr.imrs[j]) < 0); - - /* Clear TWL4030 ISRs */ - WARN_ON(twl4030_i2c_clear_isr(tmr.mod_no, - tmr.isrs[j], cor) < 0); - } - } -} - - -static void twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) -{ - int i; - - /* - * Mask and clear all TWL4030 interrupts since initially we do - * not have any TWL4030 module interrupt handlers present - */ - twl4030_mask_clear_intrs(twl4030_mod_regs, - ARRAY_SIZE(twl4030_mod_regs)); - - twl4030_irq_base = irq_base; - - /* install an irq handler for each of the PIH modules */ - for (i = irq_base; i < irq_end; i++) { - set_irq_chip_and_handler(i, &twl4030_irq_chip, - handle_simple_irq); - activate_irq(i); - } - - /* install an irq handler to demultiplex the TWL4030 interrupt */ - set_irq_data(irq_num, start_twl4030_irq_thread(irq_num)); - set_irq_chained_handler(irq_num, do_twl4030_irq); -} - -/*----------------------------------------------------------------------*/ +int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); +int twl_exit_irq(void); static int twl4030_remove(struct i2c_client *client) { unsigned i; + int status; - /* FIXME undo twl_init_irq() */ - if (twl4030_irq_base) { - dev_err(&client->dev, "can't yet clean up IRQs?\n"); - return -ENOSYS; - } + status = twl_exit_irq(); + if (status < 0) + return status; for (i = 0; i < TWL4030_NUM_SLAVES; i++) { struct twl4030_client *twl = &twl4030_modules[i]; @@ -1112,7 +725,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) return -EIO; } - if (inuse || twl4030_irq_base) { + if (inuse) { dev_dbg(&client->dev, "driver is already in use\n"); return -EBUSY; } @@ -1146,9 +759,9 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) if (client->irq && pdata->irq_base && pdata->irq_end > pdata->irq_base) { - twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end); - dev_info(&client->dev, "IRQ %d chains IRQs %d..%d\n", - client->irq, pdata->irq_base, pdata->irq_end - 1); + status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end); + if (status < 0) + goto fail; } status = add_children(pdata); diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c new file mode 100644 index 000000000000..fae868a8d499 --- /dev/null +++ b/drivers/mfd/twl4030-irq.c @@ -0,0 +1,743 @@ +/* + * twl4030-irq.c - TWL4030/TPS659x0 irq support + * + * Copyright (C) 2005-2006 Texas Instruments, Inc. + * + * Modifications to defer interrupt handling to a kernel thread: + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Based on tlv320aic23.c: + * Copyright (c) by Kai Svahn + * + * Code cleanup and modifications to IRQ handler. + * by syed khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include + + +/* + * TWL4030 IRQ handling has two stages in hardware, and thus in software. + * The Primary Interrupt Handler (PIH) stage exposes status bits saying + * which Secondary Interrupt Handler (SIH) stage is raising an interrupt. + * SIH modules are more traditional IRQ components, which support per-IRQ + * enable/disable and trigger controls; they do most of the work. + * + * These chips are designed to support IRQ handling from two different + * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status + * and mask registers in the PIH and SIH modules. + * + * We set up IRQs starting at a platform-specified base, always starting + * with PIH and the SIH for PWR_INT and then usually adding GPIO: + * base + 0 .. base + 7 PIH + * base + 8 .. base + 15 SIH for PWR_INT + * base + 16 .. base + 33 SIH for GPIO + */ + +/* PIH register offsets */ +#define REG_PIH_ISR_P1 0x01 +#define REG_PIH_ISR_P2 0x02 +#define REG_PIH_SIR 0x03 /* for testing */ + + +/* Linux could (eventually) use either IRQ line */ +static int irq_line; + +struct sih { + char name[8]; + u8 module; /* module id */ + u8 control_offset; /* for SIH_CTRL */ + bool set_cor; + + u8 bits; /* valid in isr/imr */ + u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */ + + u8 edr_offset; + u8 bytes_edr; /* bytelen of EDR */ + + /* SIR ignored -- set interrupt, for testing only */ + struct irq_data { + u8 isr_offset; + u8 imr_offset; + } mask[2]; + /* + 2 bytes padding */ +}; + +#define SIH_INITIALIZER(modname, nbits) \ + .module = TWL4030_MODULE_ ## modname, \ + .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \ + .bits = nbits, \ + .bytes_ixr = DIV_ROUND_UP(nbits, 8), \ + .edr_offset = TWL4030_ ## modname ## _EDR, \ + .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \ + .mask = { { \ + .isr_offset = TWL4030_ ## modname ## _ISR1, \ + .imr_offset = TWL4030_ ## modname ## _IMR1, \ + }, \ + { \ + .isr_offset = TWL4030_ ## modname ## _ISR2, \ + .imr_offset = TWL4030_ ## modname ## _IMR2, \ + }, }, + +/* register naming policies are inconsistent ... */ +#define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1 +#define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD +#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT + + +/* Order in this table matches order in PIH_ISR. That is, + * BIT(n) in PIH_ISR is sih_modules[n]. + */ +static const struct sih sih_modules[6] = { + [0] = { + .name = "gpio", + .module = TWL4030_MODULE_GPIO, + .control_offset = REG_GPIO_SIH_CTRL, + .set_cor = true, + .bits = TWL4030_GPIO_MAX, + .bytes_ixr = 3, + /* Note: *all* of these IRQs default to no-trigger */ + .edr_offset = REG_GPIO_EDR1, + .bytes_edr = 5, + .mask = { { + .isr_offset = REG_GPIO_ISR1A, + .imr_offset = REG_GPIO_IMR1A, + }, { + .isr_offset = REG_GPIO_ISR1B, + .imr_offset = REG_GPIO_IMR1B, + }, }, + }, + [1] = { + .name = "keypad", + .set_cor = true, + SIH_INITIALIZER(KEYPAD_KEYP, 4) + }, + [2] = { + .name = "bci", + .module = TWL4030_MODULE_INTERRUPTS, + .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL, + .bits = 12, + .bytes_ixr = 2, + .edr_offset = TWL4030_INTERRUPTS_BCIEDR1, + /* Note: most of these IRQs default to no-trigger */ + .bytes_edr = 3, + .mask = { { + .isr_offset = TWL4030_INTERRUPTS_BCIISR1A, + .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A, + }, { + .isr_offset = TWL4030_INTERRUPTS_BCIISR1B, + .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B, + }, }, + }, + [3] = { + .name = "madc", + SIH_INITIALIZER(MADC, 4) + }, + [4] = { + /* USB doesn't use the same SIH organization */ + .name = "usb", + }, + [5] = { + .name = "power", + .set_cor = true, + SIH_INITIALIZER(INT_PWR, 8) + }, + /* there are no SIH modules #6 or #7 ... */ +}; + +#undef TWL4030_MODULE_KEYPAD_KEYP +#undef TWL4030_MODULE_INT_PWR +#undef TWL4030_INT_PWR_EDR + +/*----------------------------------------------------------------------*/ + +static unsigned twl4030_irq_base; + +static struct completion irq_event; + +/* + * This thread processes interrupts reported by the Primary Interrupt Handler. + */ +static int twl4030_irq_thread(void *data) +{ + long irq = (long)data; + irq_desc_t *desc = irq_desc + irq; + static unsigned i2c_errors; + const static unsigned max_i2c_errors = 100; + + current->flags |= PF_NOFREEZE; + + while (!kthread_should_stop()) { + int ret; + int module_irq; + u8 pih_isr; + + /* Wait for IRQ, then read PIH irq status (also blocking) */ + wait_for_completion_interruptible(&irq_event); + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, + REG_PIH_ISR_P1); + if (ret) { + pr_warning("twl4030: I2C error %d reading PIH ISR\n", + ret); + if (++i2c_errors >= max_i2c_errors) { + printk(KERN_ERR "Maximum I2C error count" + " exceeded. Terminating %s.\n", + __func__); + break; + } + complete(&irq_event); + continue; + } + + /* these handlers deal with the relevant SIH irq status */ + local_irq_disable(); + for (module_irq = twl4030_irq_base; + pih_isr; + pih_isr >>= 1, module_irq++) { + if (pih_isr & 0x1) { + irq_desc_t *d = irq_desc + module_irq; + + /* These can't be masked ... always warn + * if we get any surprises. + */ + if (d->status & IRQ_DISABLED) + note_interrupt(module_irq, d, + IRQ_NONE); + else + d->handle_irq(module_irq, d); + } + } + local_irq_enable(); + + desc->chip->unmask(irq); + } + + return 0; +} + +/* + * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt. + * This is a chained interrupt, so there is no desc->action method for it. + * Now we need to query the interrupt controller in the twl4030 to determine + * which module is generating the interrupt request. However, we can't do i2c + * transactions in interrupt context, so we must defer that work to a kernel + * thread. All we do here is acknowledge and mask the interrupt and wakeup + * the kernel thread. + */ +static void handle_twl4030_pih(unsigned int irq, irq_desc_t *desc) +{ + /* Acknowledge, clear *AND* mask the interrupt... */ + desc->chip->ack(irq); + complete(&irq_event); +} + +static struct task_struct *start_twl4030_irq_thread(long irq) +{ + struct task_struct *thread; + + init_completion(&irq_event); + thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq"); + if (!thread) + pr_err("twl4030: could not create irq %ld thread!\n", irq); + + return thread; +} + +/*----------------------------------------------------------------------*/ + +/* + * twl4030_init_sih_modules() ... start from a known state where no + * IRQs will be coming in, and where we can quickly enable them then + * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL. + * + * NOTE: we don't touch EDR registers here; they stay with hardware + * defaults or whatever the last value was. Note that when both EDR + * bits for an IRQ are clear, that's as if its IMR bit is set... + */ +static int twl4030_init_sih_modules(unsigned line) +{ + const struct sih *sih; + u8 buf[4]; + int i; + int status; + + /* line 0 == int1_n signal; line 1 == int2_n signal */ + if (line > 1) + return -EINVAL; + + irq_line = line; + + /* disable all interrupts on our line */ + memset(buf, 0xff, sizeof buf); + sih = sih_modules; + for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) { + + /* skip USB -- it's funky */ + if (!sih->bytes_ixr) + continue; + + status = twl4030_i2c_write(sih->module, buf, + sih->mask[line].imr_offset, sih->bytes_ixr); + if (status < 0) + pr_err("twl4030: err %d initializing %s %s\n", + status, sih->name, "IMR"); + + /* Maybe disable "exclusive" mode; buffer second pending irq; + * set Clear-On-Read (COR) bit. + * + * NOTE that sometimes COR polarity is documented as being + * inverted: for MADC and BCI, COR=1 means "clear on write". + * And for PWR_INT it's not documented... + */ + if (sih->set_cor) { + status = twl4030_i2c_write_u8(sih->module, + TWL4030_SIH_CTRL_COR_MASK, + sih->control_offset); + if (status < 0) + pr_err("twl4030: err %d initializing %s %s\n", + status, sih->name, "SIH_CTRL"); + } + } + + sih = sih_modules; + for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) { + u8 rxbuf[4]; + int j; + + /* skip USB */ + if (!sih->bytes_ixr) + continue; + + /* Clear pending interrupt status. Either the read was + * enough, or we need to write those bits. Repeat, in + * case an IRQ is pending (PENDDIS=0) ... that's not + * uncommon with PWR_INT.PWRON. + */ + for (j = 0; j < 2; j++) { + status = twl4030_i2c_read(sih->module, rxbuf, + sih->mask[line].isr_offset, sih->bytes_ixr); + if (status < 0) + pr_err("twl4030: err %d initializing %s %s\n", + status, sih->name, "ISR"); + + if (!sih->set_cor) + status = twl4030_i2c_write(sih->module, buf, + sih->mask[line].isr_offset, + sih->bytes_ixr); + /* else COR=1 means read sufficed. + * (for most SIH modules...) + */ + } + } + + return 0; +} + +static inline void activate_irq(int irq) +{ +#ifdef CONFIG_ARM + /* ARM requires an extra step to clear IRQ_NOREQUEST, which it + * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. + */ + set_irq_flags(irq, IRQF_VALID); +#else + /* same effect on other architectures */ + set_irq_noprobe(irq); +#endif +} + +/*----------------------------------------------------------------------*/ + +static DEFINE_SPINLOCK(sih_agent_lock); + +static struct workqueue_struct *wq; + +struct sih_agent { + int irq_base; + const struct sih *sih; + + u32 imr; + bool imr_change_pending; + struct work_struct mask_work; + + u32 edge_change; + struct work_struct edge_work; +}; + +static void twl4030_sih_do_mask(struct work_struct *work) +{ + struct sih_agent *agent; + const struct sih *sih; + union { + u8 bytes[4]; + u32 word; + } imr; + int status; + + agent = container_of(work, struct sih_agent, mask_work); + + /* see what work we have */ + spin_lock_irq(&sih_agent_lock); + if (agent->imr_change_pending) { + sih = agent->sih; + /* byte[0] gets overwritten as we write ... */ + imr.word = cpu_to_le32(agent->imr << 8); + agent->imr_change_pending = false; + } else + sih = NULL; + spin_unlock_irq(&sih_agent_lock); + if (!sih) + return; + + /* write the whole mask ... simpler than subsetting it */ + status = twl4030_i2c_write(sih->module, imr.bytes, + sih->mask[irq_line].imr_offset, sih->bytes_ixr); + if (status) + pr_err("twl4030: %s, %s --> %d\n", __func__, + "write", status); +} + +static void twl4030_sih_do_edge(struct work_struct *work) +{ + struct sih_agent *agent; + const struct sih *sih; + u8 bytes[6]; + u32 edge_change; + int status; + + agent = container_of(work, struct sih_agent, edge_work); + + /* see what work we have */ + spin_lock_irq(&sih_agent_lock); + edge_change = agent->edge_change; + agent->edge_change = 0;; + sih = edge_change ? agent->sih : NULL; + spin_unlock_irq(&sih_agent_lock); + if (!sih) + return; + + /* Read, reserving first byte for write scratch. Yes, this + * could be cached for some speedup ... but be careful about + * any processor on the other IRQ line, EDR registers are + * shared. + */ + status = twl4030_i2c_read(sih->module, bytes + 1, + sih->edr_offset, sih->bytes_edr); + if (status) { + pr_err("twl4030: %s, %s --> %d\n", __func__, + "read", status); + return; + } + + /* Modify only the bits we know must change */ + while (edge_change) { + int i = fls(edge_change) - 1; + struct irq_desc *d = irq_desc + i + agent->irq_base; + int byte = 1 + (i >> 2); + int off = (i & 0x3) * 2; + + bytes[byte] &= ~(0x03 << off); + + spin_lock_irq(&d->lock); + if (d->status & IRQ_TYPE_EDGE_RISING) + bytes[byte] |= BIT(off + 1); + if (d->status & IRQ_TYPE_EDGE_FALLING) + bytes[byte] |= BIT(off + 0); + spin_unlock_irq(&d->lock); + + edge_change &= ~BIT(i); + } + + /* Write */ + status = twl4030_i2c_write(sih->module, bytes, + sih->edr_offset, sih->bytes_edr); + if (status) + pr_err("twl4030: %s, %s --> %d\n", __func__, + "write", status); +} + +/*----------------------------------------------------------------------*/ + +/* + * All irq_chip methods get issued from code holding irq_desc[irq].lock, + * which can't perform the underlying I2C operations (because they sleep). + * So we must hand them off to a thread (workqueue) and cope with asynch + * completion, potentially including some re-ordering, of these requests. + */ + +static void twl4030_sih_mask(unsigned irq) +{ + struct sih_agent *sih = get_irq_chip_data(irq); + unsigned long flags; + + spin_lock_irqsave(&sih_agent_lock, flags); + sih->imr |= BIT(irq - sih->irq_base); + sih->imr_change_pending = true; + queue_work(wq, &sih->mask_work); + spin_unlock_irqrestore(&sih_agent_lock, flags); +} + +static void twl4030_sih_unmask(unsigned irq) +{ + struct sih_agent *sih = get_irq_chip_data(irq); + unsigned long flags; + + spin_lock_irqsave(&sih_agent_lock, flags); + sih->imr &= ~BIT(irq - sih->irq_base); + sih->imr_change_pending = true; + queue_work(wq, &sih->mask_work); + spin_unlock_irqrestore(&sih_agent_lock, flags); +} + +static int twl4030_sih_set_type(unsigned irq, unsigned trigger) +{ + struct sih_agent *sih = get_irq_chip_data(irq); + struct irq_desc *desc = irq_desc + irq; + unsigned long flags; + + if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + return -EINVAL; + + spin_lock_irqsave(&sih_agent_lock, flags); + if ((desc->status & IRQ_TYPE_SENSE_MASK) != trigger) { + desc->status &= ~IRQ_TYPE_SENSE_MASK; + desc->status |= trigger; + sih->edge_change |= BIT(irq - sih->irq_base); + queue_work(wq, &sih->edge_work); + } + spin_unlock_irqrestore(&sih_agent_lock, flags); + return 0; +} + +static struct irq_chip twl4030_sih_irq_chip = { + .name = "twl4030", + .mask = twl4030_sih_mask, + .unmask = twl4030_sih_unmask, + .set_type = twl4030_sih_set_type, +}; + +/*----------------------------------------------------------------------*/ + +static inline int sih_read_isr(const struct sih *sih) +{ + int status; + union { + u8 bytes[4]; + u32 word; + } isr; + + /* FIXME need retry-on-error ... */ + + isr.word = 0; + status = twl4030_i2c_read(sih->module, isr.bytes, + sih->mask[irq_line].isr_offset, sih->bytes_ixr); + + return (status < 0) ? status : le32_to_cpu(isr.word); +} + +/* + * Generic handler for SIH interrupts ... we "know" this is called + * in task context, with IRQs enabled. + */ +static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc) +{ + struct sih_agent *agent = get_irq_data(irq); + const struct sih *sih = agent->sih; + int isr; + + /* reading ISR acks the IRQs, using clear-on-read mode */ + local_irq_enable(); + isr = sih_read_isr(sih); + local_irq_disable(); + + if (isr < 0) { + pr_err("twl4030: %s SIH, read ISR error %d\n", + sih->name, isr); + /* REVISIT: recover; eventually mask it all, etc */ + return; + } + + while (isr) { + irq = fls(isr); + irq--; + isr &= ~BIT(irq); + + if (irq < sih->bits) + generic_handle_irq(agent->irq_base + irq); + else + pr_err("twl4030: %s SIH, invalid ISR bit %d\n", + sih->name, irq); + } +} + +static unsigned twl4030_irq_next; + +/* returns the first IRQ used by this SIH bank, + * or negative errno + */ +int twl4030_sih_setup(int module) +{ + int sih_mod; + const struct sih *sih = NULL; + struct sih_agent *agent; + int i, irq; + int status = -EINVAL; + unsigned irq_base = twl4030_irq_next; + + /* only support modules with standard clear-on-read for now */ + for (sih_mod = 0, sih = sih_modules; + sih_mod < ARRAY_SIZE(sih_modules); + sih_mod++, sih++) { + if (sih->module == module && sih->set_cor) { + if (!WARN((irq_base + sih->bits) > NR_IRQS, + "irq %d for %s too big\n", + irq_base + sih->bits, + sih->name)) + status = 0; + break; + } + } + if (status < 0) + return status; + + agent = kzalloc(sizeof *agent, GFP_KERNEL); + if (!agent) + return -ENOMEM; + + status = 0; + + agent->irq_base = irq_base; + agent->sih = sih; + agent->imr = ~0; + INIT_WORK(&agent->mask_work, twl4030_sih_do_mask); + INIT_WORK(&agent->edge_work, twl4030_sih_do_edge); + + for (i = 0; i < sih->bits; i++) { + irq = irq_base + i; + + set_irq_chip_and_handler(irq, &twl4030_sih_irq_chip, + handle_edge_irq); + set_irq_chip_data(irq, agent); + activate_irq(irq); + } + + status = irq_base; + twl4030_irq_next += i; + + /* replace generic PIH handler (handle_simple_irq) */ + irq = sih_mod + twl4030_irq_base; + set_irq_data(irq, agent); + set_irq_chained_handler(irq, handle_twl4030_sih); + + pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name, + irq, irq_base, twl4030_irq_next - 1); + + return status; +} + +/* FIXME need a call to reverse twl4030_sih_setup() ... */ + + +/*----------------------------------------------------------------------*/ + +/* FIXME pass in which interrupt line we'll use ... */ +#define twl_irq_line 0 + +int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) +{ + static struct irq_chip twl4030_irq_chip; + + int status; + int i; + struct task_struct *task; + + /* + * Mask and clear all TWL4030 interrupts since initially we do + * not have any TWL4030 module interrupt handlers present + */ + status = twl4030_init_sih_modules(twl_irq_line); + if (status < 0) + return status; + + wq = create_singlethread_workqueue("twl4030-irqchip"); + if (!wq) { + pr_err("twl4030: workqueue FAIL\n"); + return -ESRCH; + } + + twl4030_irq_base = irq_base; + + /* install an irq handler for each of the SIH modules; + * clone dummy irq_chip since PIH can't *do* anything + */ + twl4030_irq_chip = dummy_irq_chip; + twl4030_irq_chip.name = "twl4030"; + + twl4030_sih_irq_chip.ack = dummy_irq_chip.ack; + + for (i = irq_base; i < irq_end; i++) { + set_irq_chip_and_handler(i, &twl4030_irq_chip, + handle_simple_irq); + activate_irq(i); + } + twl4030_irq_next = i; + pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH", + irq_num, irq_base, twl4030_irq_next - 1); + + /* ... and the PWR_INT module ... */ + status = twl4030_sih_setup(TWL4030_MODULE_INT); + if (status < 0) { + pr_err("twl4030: sih_setup PWR INT --> %d\n", status); + goto fail; + } + + /* install an irq handler to demultiplex the TWL4030 interrupt */ + task = start_twl4030_irq_thread(irq_num); + if (!task) { + pr_err("twl4030: irq thread FAIL\n"); + status = -ESRCH; + goto fail; + } + + set_irq_data(irq_num, task); + set_irq_chained_handler(irq_num, handle_twl4030_pih); + + return status; + +fail: + for (i = irq_base; i < irq_end; i++) + set_irq_chip_and_handler(i, NULL, NULL); + destroy_workqueue(wq); + wq = NULL; + return status; +} + +int twl_exit_irq(void) +{ + /* FIXME undo twl_init_irq() */ + if (twl4030_irq_base) { + pr_err("twl4030: can't yet clean up IRQs?\n"); + return -ENOSYS; + } + return 0; +} diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index cdb453162a97..fb604dcd38f1 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -228,6 +228,12 @@ struct twl4030_gpio_platform_data { int gpio_base; unsigned irq_base, irq_end; + /* package the two LED signals as output-only GPIOs? */ + bool use_leds; + + /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */ + u8 mmc_cd; + /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup * should be enabled. Else, if that bit is set in "pulldowns", * that pulldown is enabled. Don't waste power by letting any @@ -277,6 +283,8 @@ struct twl4030_platform_data { /*----------------------------------------------------------------------*/ +int twl4030_sih_setup(int module); + /* * FIXME completely stop using TWL4030_IRQ_BASE ... instead, pass the * IRQ data to subsidiary devices using platform device resources. @@ -291,16 +299,16 @@ struct twl4030_platform_data { #define TWL4030_MODIRQ_BCI (TWL4030_IRQ_BASE + 2) #define TWL4030_MODIRQ_MADC (TWL4030_IRQ_BASE + 3) /* #define TWL4030_MODIRQ_USB (TWL4030_IRQ_BASE + 4) */ -#define TWL4030_MODIRQ_PWR (TWL4030_IRQ_BASE + 5) +/* #define TWL4030_MODIRQ_PWR (TWL4030_IRQ_BASE + 5) */ #define TWL4030_PWRIRQ_PWRBTN (TWL4030_PWR_IRQ_BASE + 0) -#define TWL4030_PWRIRQ_CHG_PRES (TWL4030_PWR_IRQ_BASE + 1) -#define TWL4030_PWRIRQ_USB_PRES (TWL4030_PWR_IRQ_BASE + 2) -#define TWL4030_PWRIRQ_RTC (TWL4030_PWR_IRQ_BASE + 3) -#define TWL4030_PWRIRQ_HOT_DIE (TWL4030_PWR_IRQ_BASE + 4) -#define TWL4030_PWRIRQ_PWROK_TIMEOUT (TWL4030_PWR_IRQ_BASE + 5) -#define TWL4030_PWRIRQ_MBCHG (TWL4030_PWR_IRQ_BASE + 6) -#define TWL4030_PWRIRQ_SC_DETECT (TWL4030_PWR_IRQ_BASE + 7) +/* #define TWL4030_PWRIRQ_CHG_PRES (TWL4030_PWR_IRQ_BASE + 1) */ +/* #define TWL4030_PWRIRQ_USB_PRES (TWL4030_PWR_IRQ_BASE + 2) */ +/* #define TWL4030_PWRIRQ_RTC (TWL4030_PWR_IRQ_BASE + 3) */ +/* #define TWL4030_PWRIRQ_HOT_DIE (TWL4030_PWR_IRQ_BASE + 4) */ +/* #define TWL4030_PWRIRQ_PWROK_TIMEOUT (TWL4030_PWR_IRQ_BASE + 5) */ +/* #define TWL4030_PWRIRQ_MBCHG (TWL4030_PWR_IRQ_BASE + 6) */ +/* #define TWL4030_PWRIRQ_SC_DETECT (TWL4030_PWR_IRQ_BASE + 7) */ /* Rest are unsued currently*/ @@ -317,17 +325,13 @@ struct twl4030_platform_data { /* TWL4030 GPIO interrupt definitions */ #define TWL4030_GPIO_IRQ_NO(n) (TWL4030_GPIO_IRQ_BASE + (n)) -#define TWL4030_GPIO_IS_ENABLE 1 /* * Exported TWL4030 GPIO APIs * * WARNING -- use standard GPIO and IRQ calls instead; these will vanish. */ -int twl4030_get_gpio_datain(int gpio); -int twl4030_request_gpio(int gpio); int twl4030_set_gpio_debounce(int gpio, int enable); -int twl4030_free_gpio(int gpio); #if defined(CONFIG_TWL4030_BCI_BATTERY) || \ defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) -- cgit v1.2.2 From f96411ab73647ebf9485d77546c0c1f554bafcd7 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 20 Oct 2008 23:50:05 +0200 Subject: mfd: rtc-twl4030 driver This adds a driver for the RTC inside the TWL4030 multi-function device. It's a fairly basic RTC, with a wake-capable alarm. Note that many of the pre-release Overo boards now in circulation can't effectively use this RTC, because of a wiring error that puts its TWL chip into "secure" mode. (As in "secure yourself against tampering".) This isn't an issue on other OMAP3 boards now supported in mainline, such as Beagle and Labrador. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren Acked-by: Alessandro Zummo Signed-off-by: Samuel Ortiz --- drivers/rtc/Kconfig | 10 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-twl4030.c | 564 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 575 insertions(+) create mode 100644 drivers/rtc/rtc-twl4030.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 814f49fde530..847481dc8d72 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -246,6 +246,16 @@ config RTC_DRV_TWL92330 platforms. The support is integrated with the rest of the Menelaus driver; it's not separate module. +config RTC_DRV_TWL4030 + tristate "TI TWL4030/TWL5030/TPS659x0" + depends on RTC_CLASS && TWL4030_CORE + help + If you say yes here you get support for the RTC on the + TWL4030 family chips, used mostly with OMAP3 platforms. + + This driver can also be built as a module. If so, the module + will be called rtc-twl4030. + config RTC_DRV_S35390A tristate "Seiko Instruments S-35390A" select BITREVERSE diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index d6a9ac7176ea..e9e8474cc8fe 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o +obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c new file mode 100644 index 000000000000..abe87a4d2665 --- /dev/null +++ b/drivers/rtc/rtc-twl4030.c @@ -0,0 +1,564 @@ +/* + * rtc-twl4030.c -- TWL4030 Real Time Clock interface + * + * Copyright (C) 2007 MontaVista Software, Inc + * Author: Alexandre Rusev + * + * Based on original TI driver twl4030-rtc.c + * Copyright (C) 2006 Texas Instruments, Inc. + * + * Based on rtc-omap.c + * Copyright (C) 2003 MontaVista Software, Inc. + * Author: George G. Davis or + * Copyright (C) 2006 David Brownell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +/* + * RTC block register offsets (use TWL_MODULE_RTC) + */ +#define REG_SECONDS_REG 0x00 +#define REG_MINUTES_REG 0x01 +#define REG_HOURS_REG 0x02 +#define REG_DAYS_REG 0x03 +#define REG_MONTHS_REG 0x04 +#define REG_YEARS_REG 0x05 +#define REG_WEEKS_REG 0x06 + +#define REG_ALARM_SECONDS_REG 0x07 +#define REG_ALARM_MINUTES_REG 0x08 +#define REG_ALARM_HOURS_REG 0x09 +#define REG_ALARM_DAYS_REG 0x0A +#define REG_ALARM_MONTHS_REG 0x0B +#define REG_ALARM_YEARS_REG 0x0C + +#define REG_RTC_CTRL_REG 0x0D +#define REG_RTC_STATUS_REG 0x0E +#define REG_RTC_INTERRUPTS_REG 0x0F + +#define REG_RTC_COMP_LSB_REG 0x10 +#define REG_RTC_COMP_MSB_REG 0x11 + +/* RTC_CTRL_REG bitfields */ +#define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01 +#define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02 +#define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04 +#define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08 +#define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10 +#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20 +#define BIT_RTC_CTRL_REG_GET_TIME_M 0x40 + +/* RTC_STATUS_REG bitfields */ +#define BIT_RTC_STATUS_REG_RUN_M 0x02 +#define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04 +#define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08 +#define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10 +#define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20 +#define BIT_RTC_STATUS_REG_ALARM_M 0x40 +#define BIT_RTC_STATUS_REG_POWER_UP_M 0x80 + +/* RTC_INTERRUPTS_REG bitfields */ +#define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03 +#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04 +#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08 + + +/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */ +#define ALL_TIME_REGS 6 + +/*----------------------------------------------------------------------*/ + +/* + * Supports 1 byte read from TWL4030 RTC register. + */ +static int twl4030_rtc_read_u8(u8 *data, u8 reg) +{ + int ret; + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); + if (ret < 0) + pr_err("twl4030_rtc: Could not read TWL4030" + "register %X - error %d\n", reg, ret); + return ret; +} + +/* + * Supports 1 byte write to TWL4030 RTC registers. + */ +static int twl4030_rtc_write_u8(u8 data, u8 reg) +{ + int ret; + + ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); + if (ret < 0) + pr_err("twl4030_rtc: Could not write TWL4030" + "register %X - error %d\n", reg, ret); + return ret; +} + +/* + * Cache the value for timer/alarm interrupts register; this is + * only changed by callers holding rtc ops lock (or resume). + */ +static unsigned char rtc_irq_bits; + +/* + * Enable timer and/or alarm interrupts. + */ +static int set_rtc_irq_bit(unsigned char bit) +{ + unsigned char val; + int ret; + + val = rtc_irq_bits | bit; + ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + if (ret == 0) + rtc_irq_bits = val; + + return ret; +} + +/* + * Disable timer and/or alarm interrupts. + */ +static int mask_rtc_irq_bit(unsigned char bit) +{ + unsigned char val; + int ret; + + val = rtc_irq_bits & ~bit; + ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + if (ret == 0) + rtc_irq_bits = val; + + return ret; +} + +static inline int twl4030_rtc_alarm_irq_set_state(int enabled) +{ + int ret; + + if (enabled) + ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + else + ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + + return ret; +} + +static inline int twl4030_rtc_irq_set_state(int enabled) +{ + int ret; + + if (enabled) + ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + else + ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + + return ret; +} + +/* + * Gets current TWL4030 RTC time and date parameters. + * + * The RTC's time/alarm representation is not what gmtime(3) requires + * Linux to use: + * + * - Months are 1..12 vs Linux 0-11 + * - Years are 0..99 vs Linux 1900..N (we assume 21st century) + */ +static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + u8 save_control; + + ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + if (ret < 0) + return ret; + + save_control |= BIT_RTC_CTRL_REG_GET_TIME_M; + + ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) + return ret; + + ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + REG_SECONDS_REG, ALL_TIME_REGS); + + if (ret < 0) { + dev_err(dev, "rtc_read_time error %d\n", ret); + return ret; + } + + tm->tm_sec = bcd2bin(rtc_data[0]); + tm->tm_min = bcd2bin(rtc_data[1]); + tm->tm_hour = bcd2bin(rtc_data[2]); + tm->tm_mday = bcd2bin(rtc_data[3]); + tm->tm_mon = bcd2bin(rtc_data[4]) - 1; + tm->tm_year = bcd2bin(rtc_data[5]) + 100; + + return ret; +} + +static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char save_control; + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + + rtc_data[1] = bin2bcd(tm->tm_sec); + rtc_data[2] = bin2bcd(tm->tm_min); + rtc_data[3] = bin2bcd(tm->tm_hour); + rtc_data[4] = bin2bcd(tm->tm_mday); + rtc_data[5] = bin2bcd(tm->tm_mon + 1); + rtc_data[6] = bin2bcd(tm->tm_year - 100); + + /* Stop RTC while updating the TC registers */ + ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + if (ret < 0) + goto out; + + save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M; + twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) + goto out; + + /* update all the time registers in one shot */ + ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data, + REG_SECONDS_REG, ALL_TIME_REGS); + if (ret < 0) { + dev_err(dev, "rtc_set_time error %d\n", ret); + goto out; + } + + /* Start back RTC */ + save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M; + ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + +out: + return ret; +} + +/* + * Gets current TWL4030 RTC alarm time. + */ +static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + + ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + if (ret < 0) { + dev_err(dev, "rtc_read_alarm error %d\n", ret); + return ret; + } + + /* some of these fields may be wildcard/"match all" */ + alm->time.tm_sec = bcd2bin(rtc_data[0]); + alm->time.tm_min = bcd2bin(rtc_data[1]); + alm->time.tm_hour = bcd2bin(rtc_data[2]); + alm->time.tm_mday = bcd2bin(rtc_data[3]); + alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1; + alm->time.tm_year = bcd2bin(rtc_data[5]) + 100; + + /* report cached alarm enable state */ + if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) + alm->enabled = 1; + + return ret; +} + +static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char alarm_data[ALL_TIME_REGS + 1]; + int ret; + + ret = twl4030_rtc_alarm_irq_set_state(0); + if (ret) + goto out; + + alarm_data[1] = bin2bcd(alm->time.tm_sec); + alarm_data[2] = bin2bcd(alm->time.tm_min); + alarm_data[3] = bin2bcd(alm->time.tm_hour); + alarm_data[4] = bin2bcd(alm->time.tm_mday); + alarm_data[5] = bin2bcd(alm->time.tm_mon + 1); + alarm_data[6] = bin2bcd(alm->time.tm_year - 100); + + /* update all the alarm registers in one shot */ + ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data, + REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + if (ret) { + dev_err(dev, "rtc_set_alarm error %d\n", ret); + goto out; + } + + if (alm->enabled) + ret = twl4030_rtc_alarm_irq_set_state(1); +out: + return ret; +} + +#ifdef CONFIG_RTC_INTF_DEV + +static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + switch (cmd) { + case RTC_AIE_OFF: + return twl4030_rtc_alarm_irq_set_state(0); + case RTC_AIE_ON: + return twl4030_rtc_alarm_irq_set_state(1); + case RTC_UIE_OFF: + return twl4030_rtc_irq_set_state(0); + case RTC_UIE_ON: + return twl4030_rtc_irq_set_state(1); + + default: + return -ENOIOCTLCMD; + } +} + +#else +#define omap_rtc_ioctl NULL +#endif + +static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) +{ + unsigned long events = 0; + int ret = IRQ_NONE; + int res; + u8 rd_reg; + +#ifdef CONFIG_LOCKDEP + /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which + * we don't want and can't tolerate. Although it might be + * friendlier not to borrow this thread context... + */ + local_irq_enable(); +#endif + + res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + if (res) + goto out; + /* + * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG. + * only one (ALARM or RTC) interrupt source may be enabled + * at time, we also could check our results + * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM] + */ + if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) + events |= RTC_IRQF | RTC_AF; + else + events |= RTC_IRQF | RTC_UF; + + res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M, + REG_RTC_STATUS_REG); + if (res) + goto out; + + /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1 + * needs 2 reads to clear the interrupt. One read is done in + * do_twl4030_pwrirq(). Doing the second read, to clear + * the bit. + * + * FIXME the reason PWR_ISR1 needs an extra read is that + * RTC_IF retriggered until we cleared REG_ALARM_M above. + * But re-reading like this is a bad hack; by doing so we + * risk wrongly clearing status for some other IRQ (losing + * the interrupt). Be smarter about handling RTC_UF ... + */ + res = twl4030_i2c_read_u8(TWL4030_MODULE_INT, + &rd_reg, TWL4030_INT_PWR_ISR1); + if (res) + goto out; + + /* Notify RTC core on event */ + rtc_update_irq(rtc, 1, events); + + ret = IRQ_HANDLED; +out: + return ret; +} + +static struct rtc_class_ops twl4030_rtc_ops = { + .ioctl = twl4030_rtc_ioctl, + .read_time = twl4030_rtc_read_time, + .set_time = twl4030_rtc_set_time, + .read_alarm = twl4030_rtc_read_alarm, + .set_alarm = twl4030_rtc_set_alarm, +}; + +/*----------------------------------------------------------------------*/ + +static int __devinit twl4030_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc; + int ret = 0; + int irq = platform_get_irq(pdev, 0); + u8 rd_reg; + + if (irq < 0) + return irq; + + rtc = rtc_device_register(pdev->name, + &pdev->dev, &twl4030_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + ret = -EINVAL; + dev_err(&pdev->dev, "can't register RTC device, err %ld\n", + PTR_ERR(rtc)); + goto out0; + + } + + platform_set_drvdata(pdev, rtc); + + ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + + if (ret < 0) + goto out1; + + if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M) + dev_warn(&pdev->dev, "Power up reset detected.\n"); + + if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) + dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n"); + + /* Clear RTC Power up reset and pending alarm interrupts */ + ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG); + if (ret < 0) + goto out1; + + ret = request_irq(irq, twl4030_rtc_interrupt, + IRQF_TRIGGER_RISING, + rtc->dev.bus_id, rtc); + if (ret < 0) { + dev_err(&pdev->dev, "IRQ is not free.\n"); + goto out1; + } + + /* Check RTC module status, Enable if it is off */ + ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG); + if (ret < 0) + goto out2; + + if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) { + dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n"); + rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M; + ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG); + if (ret < 0) + goto out2; + } + + /* init cached IRQ enable bits */ + ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); + if (ret < 0) + goto out2; + + return ret; + + +out2: + free_irq(irq, rtc); +out1: + rtc_device_unregister(rtc); +out0: + return ret; +} + +/* + * Disable all TWL4030 RTC module interrupts. + * Sets status flag to free. + */ +static int __devexit twl4030_rtc_remove(struct platform_device *pdev) +{ + /* leave rtc running, but disable irqs */ + struct rtc_device *rtc = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + + free_irq(irq, rtc); + + rtc_device_unregister(rtc); + platform_set_drvdata(pdev, NULL); + return 0; +} + +static void twl4030_rtc_shutdown(struct platform_device *pdev) +{ + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | + BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); +} + +#ifdef CONFIG_PM + +static unsigned char irqstat; + +static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + irqstat = rtc_irq_bits; + + /* REVISIT alarm may need to wake us from sleep */ + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | + BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + return 0; +} + +static int twl4030_rtc_resume(struct platform_device *pdev) +{ + set_rtc_irq_bit(irqstat); + return 0; +} + +#else +#define twl4030_rtc_suspend NULL +#define twl4030_rtc_resume NULL +#endif + +MODULE_ALIAS("platform:twl4030_rtc"); + +static struct platform_driver twl4030rtc_driver = { + .probe = twl4030_rtc_probe, + .remove = __devexit_p(twl4030_rtc_remove), + .shutdown = twl4030_rtc_shutdown, + .suspend = twl4030_rtc_suspend, + .resume = twl4030_rtc_resume, + .driver = { + .owner = THIS_MODULE, + .name = "twl4030_rtc", + }, +}; + +static int __init twl4030_rtc_init(void) +{ + return platform_driver_register(&twl4030rtc_driver); +} +module_init(twl4030_rtc_init); + +static void __exit twl4030_rtc_exit(void) +{ + platform_driver_unregister(&twl4030rtc_driver); +} +module_exit(twl4030_rtc_exit); + +MODULE_AUTHOR("Texas Instruments, MontaVista Software"); +MODULE_LICENSE("GPL"); -- cgit v1.2.2 From e9d359471dfed51a1bdeaa484ee7dac0679d0a20 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 20 Oct 2008 23:51:46 +0200 Subject: mfd: twl4030-gpio driver This adds basic support for the GPIOs in the twl4030 power management chip. That includes two open drain LED drivers, and the use of GPIO-0 (and GPIO-1) as MMC/SD card detect switches which can control whether the VMMC1 (and VMMC2) regulators are active. This version of the code has a debounce call that will probably be replaced before long, when a more generic interface exists. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren Signed-off-by: Samuel Ortiz --- drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/twl4030-gpio.c | 521 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 529 insertions(+) create mode 100644 drivers/gpio/twl4030-gpio.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index dbd42d6c93a7..7f2ee27fe76b 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -127,6 +127,13 @@ config GPIO_PCF857X This driver provides an in-kernel interface to those GPIOs using platform-neutral GPIO calls. +config GPIO_TWL4030 + tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" + depends on TWL4030_CORE + help + Say yes here to access the GPIO signals of various multi-function + power management chips from Texas Instruments. + comment "PCI GPIO expanders:" config GPIO_BT8XX diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 01b4bbde1956..6aafdeb9ad03 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -9,4 +9,5 @@ obj-$(CONFIG_GPIO_MAX732X) += max732x.o obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o +obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c new file mode 100644 index 000000000000..37d3eec8730a --- /dev/null +++ b/drivers/gpio/twl4030-gpio.c @@ -0,0 +1,521 @@ +/* + * twl4030_gpio.c -- access to GPIOs on TWL4030/TPS659x0 chips + * + * Copyright (C) 2006-2007 Texas Instruments, Inc. + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Code re-arranged and cleaned up by: + * Syed Mohammed Khasim + * + * Initial Code: + * Andy Lowe / Nishanth Menon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +/* + * The GPIO "subchip" supports 18 GPIOs which can be configured as + * inputs or outputs, with pullups or pulldowns on each pin. Each + * GPIO can trigger interrupts on either or both edges. + * + * GPIO interrupts can be fed to either of two IRQ lines; this is + * intended to support multiple hosts. + * + * There are also two LED pins used sometimes as output-only GPIOs. + */ + + +static struct gpio_chip twl_gpiochip; +static int twl4030_gpio_irq_base; + +/* genirq interfaces are not available to modules */ +#ifdef MODULE +#define is_module() true +#else +#define is_module() false +#endif + +/* GPIO_CTRL Fields */ +#define MASK_GPIO_CTRL_GPIO0CD1 BIT(0) +#define MASK_GPIO_CTRL_GPIO1CD2 BIT(1) +#define MASK_GPIO_CTRL_GPIO_ON BIT(2) + +/* Mask for GPIO registers when aggregated into a 32-bit integer */ +#define GPIO_32_MASK 0x0003ffff + +/* Data structures */ +static DEFINE_MUTEX(gpio_lock); + +/* store usage of each GPIO. - each bit represents one GPIO */ +static unsigned int gpio_usage_count; + +/*----------------------------------------------------------------------*/ + +/* + * To configure TWL4030 GPIO module registers + */ +static inline int gpio_twl4030_write(u8 address, u8 data) +{ + return twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, data, address); +} + +/*----------------------------------------------------------------------*/ + +/* + * LED register offsets (use TWL4030_MODULE_{LED,PWMA,PWMB})) + * PWMs A and B are dedicated to LEDs A and B, respectively. + */ + +#define TWL4030_LED_LEDEN 0x0 + +/* LEDEN bits */ +#define LEDEN_LEDAON BIT(0) +#define LEDEN_LEDBON BIT(1) +#define LEDEN_LEDAEXT BIT(2) +#define LEDEN_LEDBEXT BIT(3) +#define LEDEN_LEDAPWM BIT(4) +#define LEDEN_LEDBPWM BIT(5) +#define LEDEN_PWM_LENGTHA BIT(6) +#define LEDEN_PWM_LENGTHB BIT(7) + +#define TWL4030_PWMx_PWMxON 0x0 +#define TWL4030_PWMx_PWMxOFF 0x1 + +#define PWMxON_LENGTH BIT(7) + +/*----------------------------------------------------------------------*/ + +/* + * To read a TWL4030 GPIO module register + */ +static inline int gpio_twl4030_read(u8 address) +{ + u8 data; + int ret = 0; + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address); + return (ret < 0) ? ret : data; +} + +/*----------------------------------------------------------------------*/ + +static u8 cached_leden; /* protected by gpio_lock */ + +/* The LED lines are open drain outputs ... a FET pulls to GND, so an + * external pullup is needed. We could also expose the integrated PWM + * as a LED brightness control; we initialize it as "always on". + */ +static void twl4030_led_set_value(int led, int value) +{ + u8 mask = LEDEN_LEDAON | LEDEN_LEDAPWM; + int status; + + if (led) + mask <<= 1; + + mutex_lock(&gpio_lock); + if (value) + cached_leden &= ~mask; + else + cached_leden |= mask; + status = twl4030_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, + TWL4030_LED_LEDEN); + mutex_unlock(&gpio_lock); +} + +static int twl4030_set_gpio_direction(int gpio, int is_input) +{ + u8 d_bnk = gpio >> 3; + u8 d_msk = BIT(gpio & 0x7); + u8 reg = 0; + u8 base = REG_GPIODATADIR1 + d_bnk; + int ret = 0; + + mutex_lock(&gpio_lock); + ret = gpio_twl4030_read(base); + if (ret >= 0) { + if (is_input) + reg = ret & ~d_msk; + else + reg = ret | d_msk; + + ret = gpio_twl4030_write(base, reg); + } + mutex_unlock(&gpio_lock); + return ret; +} + +static int twl4030_set_gpio_dataout(int gpio, int enable) +{ + u8 d_bnk = gpio >> 3; + u8 d_msk = BIT(gpio & 0x7); + u8 base = 0; + + if (enable) + base = REG_SETGPIODATAOUT1 + d_bnk; + else + base = REG_CLEARGPIODATAOUT1 + d_bnk; + + return gpio_twl4030_write(base, d_msk); +} + +static int twl4030_get_gpio_datain(int gpio) +{ + u8 d_bnk = gpio >> 3; + u8 d_off = gpio & 0x7; + u8 base = 0; + int ret = 0; + + if (unlikely((gpio >= TWL4030_GPIO_MAX) + || !(gpio_usage_count & BIT(gpio)))) + return -EPERM; + + base = REG_GPIODATAIN1 + d_bnk; + ret = gpio_twl4030_read(base); + if (ret > 0) + ret = (ret >> d_off) & 0x1; + + return ret; +} + +/* + * Configure debounce timing value for a GPIO pin on TWL4030 + */ +int twl4030_set_gpio_debounce(int gpio, int enable) +{ + u8 d_bnk = gpio >> 3; + u8 d_msk = BIT(gpio & 0x7); + u8 reg = 0; + u8 base = 0; + int ret = 0; + + if (unlikely((gpio >= TWL4030_GPIO_MAX) + || !(gpio_usage_count & BIT(gpio)))) + return -EPERM; + + base = REG_GPIO_DEBEN1 + d_bnk; + mutex_lock(&gpio_lock); + ret = gpio_twl4030_read(base); + if (ret >= 0) { + if (enable) + reg = ret | d_msk; + else + reg = ret & ~d_msk; + + ret = gpio_twl4030_write(base, reg); + } + mutex_unlock(&gpio_lock); + return ret; +} +EXPORT_SYMBOL(twl4030_set_gpio_debounce); + +/*----------------------------------------------------------------------*/ + +static int twl_request(struct gpio_chip *chip, unsigned offset) +{ + int status = 0; + + mutex_lock(&gpio_lock); + + /* Support the two LED outputs as output-only GPIOs. */ + if (offset >= TWL4030_GPIO_MAX) { + u8 ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT + | LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA; + u8 module = TWL4030_MODULE_PWMA; + + offset -= TWL4030_GPIO_MAX; + if (offset) { + ledclr_mask <<= 1; + module = TWL4030_MODULE_PWMB; + } + + /* initialize PWM to always-drive */ + status = twl4030_i2c_write_u8(module, 0x7f, + TWL4030_PWMx_PWMxOFF); + if (status < 0) + goto done; + status = twl4030_i2c_write_u8(module, 0x7f, + TWL4030_PWMx_PWMxON); + if (status < 0) + goto done; + + /* init LED to not-driven (high) */ + module = TWL4030_MODULE_LED; + status = twl4030_i2c_read_u8(module, &cached_leden, + TWL4030_LED_LEDEN); + if (status < 0) + goto done; + cached_leden &= ~ledclr_mask; + status = twl4030_i2c_write_u8(module, cached_leden, + TWL4030_LED_LEDEN); + if (status < 0) + goto done; + + status = 0; + goto done; + } + + /* on first use, turn GPIO module "on" */ + if (!gpio_usage_count) { + struct twl4030_gpio_platform_data *pdata; + u8 value = MASK_GPIO_CTRL_GPIO_ON; + + /* optionally have the first two GPIOs switch vMMC1 + * and vMMC2 power supplies based on card presence. + */ + pdata = chip->dev->platform_data; + value |= pdata->mmc_cd & 0x03; + + status = gpio_twl4030_write(REG_GPIO_CTRL, value); + } + + if (!status) + gpio_usage_count |= (0x1 << offset); + +done: + mutex_unlock(&gpio_lock); + return status; +} + +static void twl_free(struct gpio_chip *chip, unsigned offset) +{ + if (offset >= TWL4030_GPIO_MAX) { + twl4030_led_set_value(offset - TWL4030_GPIO_MAX, 1); + return; + } + + mutex_lock(&gpio_lock); + + gpio_usage_count &= ~BIT(offset); + + /* on last use, switch off GPIO module */ + if (!gpio_usage_count) + gpio_twl4030_write(REG_GPIO_CTRL, 0x0); + + mutex_unlock(&gpio_lock); +} + +static int twl_direction_in(struct gpio_chip *chip, unsigned offset) +{ + return (offset < TWL4030_GPIO_MAX) + ? twl4030_set_gpio_direction(offset, 1) + : -EINVAL; +} + +static int twl_get(struct gpio_chip *chip, unsigned offset) +{ + int status = 0; + + if (offset < TWL4030_GPIO_MAX) + status = twl4030_get_gpio_datain(offset); + else if (offset == TWL4030_GPIO_MAX) + status = cached_leden & LEDEN_LEDAON; + else + status = cached_leden & LEDEN_LEDBON; + return (status < 0) ? 0 : status; +} + +static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value) +{ + if (offset < TWL4030_GPIO_MAX) { + twl4030_set_gpio_dataout(offset, value); + return twl4030_set_gpio_direction(offset, 0); + } else { + twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value); + return 0; + } +} + +static void twl_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (offset < TWL4030_GPIO_MAX) + twl4030_set_gpio_dataout(offset, value); + else + twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value); +} + +static int twl_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return (twl4030_gpio_irq_base && (offset < TWL4030_GPIO_MAX)) + ? (twl4030_gpio_irq_base + offset) + : -EINVAL; +} + +static struct gpio_chip twl_gpiochip = { + .label = "twl4030", + .owner = THIS_MODULE, + .request = twl_request, + .free = twl_free, + .direction_input = twl_direction_in, + .get = twl_get, + .direction_output = twl_direction_out, + .set = twl_set, + .to_irq = twl_to_irq, + .can_sleep = 1, +}; + +/*----------------------------------------------------------------------*/ + +static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs) +{ + u8 message[6]; + unsigned i, gpio_bit; + + /* For most pins, a pulldown was enabled by default. + * We should have data that's specific to this board. + */ + for (gpio_bit = 1, i = 1; i < 6; i++) { + u8 bit_mask; + unsigned j; + + for (bit_mask = 0, j = 0; j < 8; j += 2, gpio_bit <<= 1) { + if (ups & gpio_bit) + bit_mask |= 1 << (j + 1); + else if (downs & gpio_bit) + bit_mask |= 1 << (j + 0); + } + message[i] = bit_mask; + } + + return twl4030_i2c_write(TWL4030_MODULE_GPIO, message, + REG_GPIOPUPDCTR1, 5); +} + +static int gpio_twl4030_remove(struct platform_device *pdev); + +static int __devinit gpio_twl4030_probe(struct platform_device *pdev) +{ + struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; + int ret; + + /* maybe setup IRQs */ + if (pdata->irq_base) { + if (is_module()) { + dev_err(&pdev->dev, + "can't dispatch IRQs from modules\n"); + goto no_irqs; + } + ret = twl4030_sih_setup(TWL4030_MODULE_GPIO); + if (ret < 0) + return ret; + WARN_ON(ret != pdata->irq_base); + twl4030_gpio_irq_base = ret; + } + +no_irqs: + /* + * NOTE: boards may waste power if they don't set pullups + * and pulldowns correctly ... default for non-ULPI pins is + * pulldown, and some other pins may have external pullups + * or pulldowns. Careful! + */ + ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); + if (ret) + dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", + pdata->pullups, pdata->pulldowns, + ret); + + twl_gpiochip.base = pdata->gpio_base; + twl_gpiochip.ngpio = TWL4030_GPIO_MAX; + twl_gpiochip.dev = &pdev->dev; + + /* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, + * is (still) clear if use_leds is set. + */ + if (pdata->use_leds) + twl_gpiochip.ngpio += 2; + + ret = gpiochip_add(&twl_gpiochip); + if (ret < 0) { + dev_err(&pdev->dev, + "could not register gpiochip, %d\n", + ret); + twl_gpiochip.ngpio = 0; + gpio_twl4030_remove(pdev); + } else if (pdata->setup) { + int status; + + status = pdata->setup(&pdev->dev, + pdata->gpio_base, TWL4030_GPIO_MAX); + if (status) + dev_dbg(&pdev->dev, "setup --> %d\n", status); + } + + return ret; +} + +static int __devexit gpio_twl4030_remove(struct platform_device *pdev) +{ + struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; + int status; + + if (pdata->teardown) { + status = pdata->teardown(&pdev->dev, + pdata->gpio_base, TWL4030_GPIO_MAX); + if (status) { + dev_dbg(&pdev->dev, "teardown --> %d\n", status); + return status; + } + } + + status = gpiochip_remove(&twl_gpiochip); + if (status < 0) + return status; + + if (is_module()) + return 0; + + /* REVISIT no support yet for deregistering all the IRQs */ + WARN_ON(1); + return -EIO; +} + +/* Note: this hardware lives inside an I2C-based multi-function device. */ +MODULE_ALIAS("platform:twl4030_gpio"); + +static struct platform_driver gpio_twl4030_driver = { + .driver.name = "twl4030_gpio", + .driver.owner = THIS_MODULE, + .probe = gpio_twl4030_probe, + .remove = __devexit_p(gpio_twl4030_remove), +}; + +static int __init gpio_twl4030_init(void) +{ + return platform_driver_register(&gpio_twl4030_driver); +} +subsys_initcall(gpio_twl4030_init); + +static void __exit gpio_twl4030_exit(void) +{ + platform_driver_unregister(&gpio_twl4030_driver); +} +module_exit(gpio_twl4030_exit); + +MODULE_AUTHOR("Texas Instruments, Inc."); +MODULE_DESCRIPTION("GPIO interface for TWL4030"); +MODULE_LICENSE("GPL"); -- cgit v1.2.2 From 799f9e3267b0938c8059ed78d7e39e00b6aa6bd2 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 20 Oct 2008 23:55:30 +0200 Subject: mfd: don't export wm3850 static functions October 10th linux-next build (powerpc allyesconfig) failed like this: drivers/mfd/wm8350-core.c:1131: error: __ksymtab_wm8350_create_cache causes a section type conflict Caused by commit 89b4012befb1abca5e86d232bc0e2a797b0d9825 ("mfd: Core support for the WM8350 AudioPlus PMIC"). wm8350_create_cache is not used elsewhere, so remove the EXPORT_SYMBOL. Signed-off-by: Stephen Rothwell Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index bf87f675e7fa..fbe22fb7847b 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1128,7 +1128,6 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int mode) out: return ret; } -EXPORT_SYMBOL_GPL(wm8350_create_cache); /* * Register a client device. This is non-fatal since there is no need to -- cgit v1.2.2 From e76f7558d89868bc295fe1220c2e5a0a82f698f6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Oct 2008 23:58:50 +0200 Subject: mfd: Don't store volatile bits in WM8350 register cache This makes the contents of the cache clearer and fixes incorrect initialisation of the cache for partially volatile registers. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index fbe22fb7847b..0d47fb9e4b3b 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -183,6 +183,9 @@ static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src) (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable) | src[i - reg]; + /* Don't store volatile bits */ + wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol; + src[i - reg] = cpu_to_be16(src[i - reg]); } @@ -1120,6 +1123,7 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int mode) } value = be16_to_cpu(value); value &= wm8350_reg_io_map[i].readable; + value &= ~wm8350_reg_io_map[i].vol; wm8350->reg_cache[i] = value; } else wm8350->reg_cache[i] = reg_map[i]; -- cgit v1.2.2 From 7ab18995e11089ea33c99fd586e8bad4932369e4 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 28 Sep 2008 16:14:52 -0700 Subject: mfd: use pci_ioremap_bar() in sm501 Use the newly introduced pci_ioremap_bar() function in drivers/mfd. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven Signed-off-by: Samuel Ortiz --- drivers/mfd/sm501.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 220e4371266b..4d9aaf9501df 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1625,8 +1625,7 @@ static int sm501_pci_probe(struct pci_dev *dev, goto err3; } - sm->regs = ioremap(pci_resource_start(dev, 1), - pci_resource_len(dev, 1)); + sm->regs = pci_ioremap_bar(dev, 1); if (sm->regs == NULL) { dev_err(&dev->dev, "cannot remap registers\n"); -- cgit v1.2.2 From 7cf5244ce4a0ab3f043f2e9593e07516b0df5715 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 22 Oct 2008 01:39:55 +0200 Subject: mfd: check for platform_get_irq() return value in sm501 sm501_devdata->irq is unsigned, while platform_get_irq() returns a signed int. Signed-off-by: Roel Kluin Signed-off-by: Samuel Ortiz --- drivers/mfd/sm501.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 4d9aaf9501df..170f9d47c2f9 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1374,31 +1374,31 @@ static int sm501_init_dev(struct sm501_devdata *sm) static int sm501_plat_probe(struct platform_device *dev) { struct sm501_devdata *sm; - int err; + int ret; sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL); if (sm == NULL) { dev_err(&dev->dev, "no memory for device data\n"); - err = -ENOMEM; + ret = -ENOMEM; goto err1; } sm->dev = &dev->dev; sm->pdev_id = dev->id; - sm->irq = platform_get_irq(dev, 0); - sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1); - sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0); sm->platdata = dev->dev.platform_data; - if (sm->irq < 0) { + ret = platform_get_irq(dev, 0); + if (ret < 0) { dev_err(&dev->dev, "failed to get irq resource\n"); - err = sm->irq; goto err_res; } + sm->irq = ret; + sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1); + sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (sm->io_res == NULL || sm->mem_res == NULL) { dev_err(&dev->dev, "failed to get IO resource\n"); - err = -ENOENT; + ret = -ENOENT; goto err_res; } @@ -1407,7 +1407,7 @@ static int sm501_plat_probe(struct platform_device *dev) if (sm->regs_claim == NULL) { dev_err(&dev->dev, "cannot claim registers\n"); - err= -EBUSY; + ret = -EBUSY; goto err_res; } @@ -1418,7 +1418,7 @@ static int sm501_plat_probe(struct platform_device *dev) if (sm->regs == NULL) { dev_err(&dev->dev, "cannot remap registers\n"); - err = -EIO; + ret = -EIO; goto err_claim; } @@ -1430,7 +1430,7 @@ static int sm501_plat_probe(struct platform_device *dev) err_res: kfree(sm); err1: - return err; + return ret; } -- cgit v1.2.2