From 274c1fde5c775a53331427d454745b9ecc5c783b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 16 Jul 2007 14:29:40 +0900 Subject: ahci: make NO_NCQ handling more consistent ahci_save_initial_config() is responsible for reading, screening the host CAP register and storing the modified result into hpriv->cap for the rest of the driver. Move ATA_FLAG_NO_NCQ handling into ahci_save_initial_config(). It's more consistent this way and the rest of the driver can always refer to hpriv->cap to determine configured capability. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index e044d6477a0f..9475e5619af1 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -545,13 +545,19 @@ static void ahci_save_initial_config(struct pci_dev *pdev, hpriv->saved_cap = cap = readl(mmio + HOST_CAP); hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); - /* some chips lie about 64bit support */ + /* some chips have errata preventing 64bit use */ if ((cap & HOST_CAP_64) && (pi->flags & AHCI_FLAG_32BIT_ONLY)) { dev_printk(KERN_INFO, &pdev->dev, "controller can't do 64bit DMA, forcing 32bit\n"); cap &= ~HOST_CAP_64; } + if ((cap & HOST_CAP_NCQ) && (pi->flags & AHCI_FLAG_NO_NCQ)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can't do NCQ, turning off CAP_NCQ\n"); + cap &= ~HOST_CAP_NCQ; + } + /* fixup zero port_map */ if (!port_map) { port_map = (1 << ahci_nr_ports(cap)) - 1; @@ -1822,7 +1828,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ahci_save_initial_config(pdev, &pi, hpriv); /* prepare host */ - if (!(pi.flags & AHCI_FLAG_NO_NCQ) && (hpriv->cap & HOST_CAP_NCQ)) + if (hpriv->cap & HOST_CAP_NCQ) pi.flags |= ATA_FLAG_NCQ; host = ata_host_alloc_pinfo(&pdev->dev, ppi, fls(hpriv->port_map)); -- cgit v1.2.2