From 21eee2dd1b5702f15924f18f923b2a281f0e72e8 Mon Sep 17 00:00:00 2001 From: Thomas Klein Date: Wed, 13 Feb 2008 16:18:33 +0100 Subject: ehea: add kdump support This patch adds kdump support to the ehea driver. As the firmware doesn't free resource handles automatically, the driver has to run an as simple as possible free resource function in case of a crash shutdown. The function iterates over two arrays freeing all resource handles which are stored there. The arrays are kept up-to-date during normal runtime. The crash handler fn is triggered by the recently introduced PPC crash shutdown reg/unreg functions. Signed-off-by: Thomas Klein Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea.h | 34 +++++- drivers/net/ehea/ehea_main.c | 281 +++++++++++++++++++++++++++++++++++++++---- 2 files changed, 290 insertions(+), 25 deletions(-) diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 88fb53eba715..7c4ead35cfa2 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0083" +#define DRV_VERSION "EHEA_0087" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 @@ -386,6 +386,13 @@ struct ehea_port_res { #define EHEA_MAX_PORTS 16 + +#define EHEA_NUM_PORTRES_FW_HANDLES 6 /* QP handle, SendCQ handle, + RecvCQ handle, EQ handle, + SendMR handle, RecvMR handle */ +#define EHEA_NUM_PORT_FW_HANDLES 1 /* EQ handle */ +#define EHEA_NUM_ADAPTER_FW_HANDLES 2 /* MR handle, NEQ handle */ + struct ehea_adapter { u64 handle; struct of_device *ofdev; @@ -405,6 +412,31 @@ struct ehea_mc_list { u64 macaddr; }; +/* kdump support */ +struct ehea_fw_handle_entry { + u64 adh; /* Adapter Handle */ + u64 fwh; /* Firmware Handle */ +}; + +struct ehea_fw_handle_array { + struct ehea_fw_handle_entry *arr; + int num_entries; + struct semaphore lock; +}; + +struct ehea_bcmc_reg_entry { + u64 adh; /* Adapter Handle */ + u32 port_id; /* Logical Port Id */ + u8 reg_type; /* Registration Type */ + u64 macaddr; +}; + +struct ehea_bcmc_reg_array { + struct ehea_bcmc_reg_entry *arr; + int num_entries; + struct semaphore lock; +}; + #define EHEA_PORT_UP 1 #define EHEA_PORT_DOWN 0 #define EHEA_PHY_LINK_UP 1 diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index c051c7e09b9a..21af674b764e 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -35,6 +35,7 @@ #include #include #include +#include #include @@ -98,8 +99,10 @@ static int port_name_cnt; static LIST_HEAD(adapter_list); u64 ehea_driver_flags; struct work_struct ehea_rereg_mr_task; - struct semaphore dlpar_mem_lock; +struct ehea_fw_handle_array ehea_fw_handles; +struct ehea_bcmc_reg_array ehea_bcmc_regs; + static int __devinit ehea_probe_adapter(struct of_device *dev, const struct of_device_id *id); @@ -132,6 +135,160 @@ void ehea_dump(void *adr, int len, char *msg) } } +static void ehea_update_firmware_handles(void) +{ + struct ehea_fw_handle_entry *arr = NULL; + struct ehea_adapter *adapter; + int num_adapters = 0; + int num_ports = 0; + int num_portres = 0; + int i = 0; + int num_fw_handles, k, l; + + /* Determine number of handles */ + list_for_each_entry(adapter, &adapter_list, list) { + num_adapters++; + + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + num_ports++; + num_portres += port->num_def_qps + port->num_add_tx_qps; + } + } + + num_fw_handles = num_adapters * EHEA_NUM_ADAPTER_FW_HANDLES + + num_ports * EHEA_NUM_PORT_FW_HANDLES + + num_portres * EHEA_NUM_PORTRES_FW_HANDLES; + + if (num_fw_handles) { + arr = kzalloc(num_fw_handles * sizeof(*arr), GFP_KERNEL); + if (!arr) + return; /* Keep the existing array */ + } else + goto out_update; + + list_for_each_entry(adapter, &adapter_list, list) { + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + for (l = 0; + l < port->num_def_qps + port->num_add_tx_qps; + l++) { + struct ehea_port_res *pr = &port->port_res[l]; + + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->qp->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->send_cq->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->recv_cq->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->eq->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->send_mr.handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->recv_mr.handle; + } + arr[i].adh = adapter->handle; + arr[i++].fwh = port->qp_eq->fw_handle; + } + + arr[i].adh = adapter->handle; + arr[i++].fwh = adapter->neq->fw_handle; + + if (adapter->mr.handle) { + arr[i].adh = adapter->handle; + arr[i++].fwh = adapter->mr.handle; + } + } + +out_update: + kfree(ehea_fw_handles.arr); + ehea_fw_handles.arr = arr; + ehea_fw_handles.num_entries = i; +} + +static void ehea_update_bcmc_registrations(void) +{ + struct ehea_bcmc_reg_entry *arr = NULL; + struct ehea_adapter *adapter; + struct ehea_mc_list *mc_entry; + int num_registrations = 0; + int i = 0; + int k; + + /* Determine number of registrations */ + list_for_each_entry(adapter, &adapter_list, list) + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + num_registrations += 2; /* Broadcast registrations */ + + list_for_each_entry(mc_entry, &port->mc_list->list,list) + num_registrations += 2; + } + + if (num_registrations) { + arr = kzalloc(num_registrations * sizeof(*arr), GFP_KERNEL); + if (!arr) + return; /* Keep the existing array */ + } else + goto out_update; + + list_for_each_entry(adapter, &adapter_list, list) { + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_BROADCAST | + EHEA_BCMC_UNTAGGED; + arr[i++].macaddr = port->mac_addr; + + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_BROADCAST | + EHEA_BCMC_VLANID_ALL; + arr[i++].macaddr = port->mac_addr; + + list_for_each_entry(mc_entry, + &port->mc_list->list, list) { + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | + EHEA_BCMC_MULTICAST | + EHEA_BCMC_UNTAGGED; + arr[i++].macaddr = mc_entry->macaddr; + + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | + EHEA_BCMC_MULTICAST | + EHEA_BCMC_VLANID_ALL; + arr[i++].macaddr = mc_entry->macaddr; + } + } + } + +out_update: + kfree(ehea_bcmc_regs.arr); + ehea_bcmc_regs.arr = arr; + ehea_bcmc_regs.num_entries = i; +} + static struct net_device_stats *ehea_get_stats(struct net_device *dev) { struct ehea_port *port = netdev_priv(dev); @@ -1601,19 +1758,25 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len); + down(&ehea_bcmc_regs.lock); + /* Deregister old MAC in pHYP */ ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC); if (ret) - goto out_free; + goto out_upregs; port->mac_addr = cb0->port_mac_addr << 16; /* Register new MAC in pHYP */ ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); if (ret) - goto out_free; + goto out_upregs; ret = 0; + +out_upregs: + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); out_free: kfree(cb0); out: @@ -1775,9 +1938,11 @@ static void ehea_set_multicast_list(struct net_device *dev) } ehea_promiscuous(dev, 0); + down(&ehea_bcmc_regs.lock); + if (dev->flags & IFF_ALLMULTI) { ehea_allmulti(dev, 1); - return; + goto out; } ehea_allmulti(dev, 0); @@ -1803,6 +1968,8 @@ static void ehea_set_multicast_list(struct net_device *dev) } out: + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); return; } @@ -2285,6 +2452,8 @@ static int ehea_up(struct net_device *dev) if (port->state == EHEA_PORT_UP) return 0; + down(&ehea_fw_handles.lock); + ret = ehea_port_res_setup(port, port->num_def_qps, port->num_add_tx_qps); if (ret) { @@ -2321,8 +2490,17 @@ static int ehea_up(struct net_device *dev) } } - ret = 0; + down(&ehea_bcmc_regs.lock); + + ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); + if (ret) { + ret = -EIO; + goto out_free_irqs; + } + port->state = EHEA_PORT_UP; + + ret = 0; goto out; out_free_irqs: @@ -2334,6 +2512,12 @@ out: if (ret) ehea_info("Failed starting %s. ret=%i", dev->name, ret); + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); + + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); + return ret; } @@ -2382,16 +2566,27 @@ static int ehea_down(struct net_device *dev) if (port->state == EHEA_PORT_DOWN) return 0; + down(&ehea_bcmc_regs.lock); ehea_drop_multicast_list(dev); + ehea_broadcast_reg_helper(port, H_DEREG_BCMC); + ehea_free_interrupts(dev); + down(&ehea_fw_handles.lock); + port->state = EHEA_PORT_DOWN; + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); + ret = ehea_clean_all_portres(port); if (ret) ehea_info("Failed freeing resources for %s. ret=%i", dev->name, ret); + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); + return ret; } @@ -2920,19 +3115,12 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter, dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT; INIT_WORK(&port->reset_task, ehea_reset_port); - - ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); - if (ret) { - ret = -EIO; - goto out_unreg_port; - } - ehea_set_ethtool_ops(dev); ret = register_netdev(dev); if (ret) { ehea_error("register_netdev failed. ret=%d", ret); - goto out_dereg_bc; + goto out_unreg_port; } port->lro_max_aggr = lro_max_aggr; @@ -2949,9 +3137,6 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter, return port; -out_dereg_bc: - ehea_broadcast_reg_helper(port, H_DEREG_BCMC); - out_unreg_port: ehea_unregister_port(port); @@ -2971,7 +3156,6 @@ static void ehea_shutdown_single_port(struct ehea_port *port) { unregister_netdev(port->netdev); ehea_unregister_port(port); - ehea_broadcast_reg_helper(port, H_DEREG_BCMC); kfree(port->mc_list); free_netdev(port->netdev); port->adapter->active_ports--; @@ -3014,7 +3198,6 @@ static int ehea_setup_ports(struct ehea_adapter *adapter) i++; }; - return 0; } @@ -3159,6 +3342,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev, ehea_error("Invalid ibmebus device probed"); return -EINVAL; } + down(&ehea_fw_handles.lock); adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); if (!adapter) { @@ -3239,7 +3423,10 @@ out_kill_eq: out_free_ad: kfree(adapter); + out: + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); return ret; } @@ -3258,18 +3445,41 @@ static int __devexit ehea_remove(struct of_device *dev) flush_scheduled_work(); + down(&ehea_fw_handles.lock); + ibmebus_free_irq(adapter->neq->attr.ist1, adapter); tasklet_kill(&adapter->neq_tasklet); ehea_destroy_eq(adapter->neq); ehea_remove_adapter_mr(adapter); list_del(&adapter->list); - kfree(adapter); + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); + return 0; } +void ehea_crash_handler(void) +{ + int i; + + if (ehea_fw_handles.arr) + for (i = 0; i < ehea_fw_handles.num_entries; i++) + ehea_h_free_resource(ehea_fw_handles.arr[i].adh, + ehea_fw_handles.arr[i].fwh, + FORCE_FREE); + + if (ehea_bcmc_regs.arr) + for (i = 0; i < ehea_bcmc_regs.num_entries; i++) + ehea_h_reg_dereg_bcmc(ehea_bcmc_regs.arr[i].adh, + ehea_bcmc_regs.arr[i].port_id, + ehea_bcmc_regs.arr[i].reg_type, + ehea_bcmc_regs.arr[i].macaddr, + 0, H_DEREG_BCMC); +} + static int ehea_reboot_notifier(struct notifier_block *nb, unsigned long action, void *unused) { @@ -3330,7 +3540,12 @@ int __init ehea_module_init(void) INIT_WORK(&ehea_rereg_mr_task, ehea_rereg_mrs); + memset(&ehea_fw_handles, 0, sizeof(ehea_fw_handles)); + memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs)); + sema_init(&dlpar_mem_lock, 1); + sema_init(&ehea_fw_handles.lock, 1); + sema_init(&ehea_bcmc_regs.lock, 1); ret = check_module_parm(); if (ret) @@ -3340,12 +3555,18 @@ int __init ehea_module_init(void) if (ret) goto out; - register_reboot_notifier(&ehea_reboot_nb); + ret = register_reboot_notifier(&ehea_reboot_nb); + if (ret) + ehea_info("failed registering reboot notifier"); + + ret = crash_shutdown_register(&ehea_crash_handler); + if (ret) + ehea_info("failed registering crash handler"); ret = ibmebus_register_driver(&ehea_driver); if (ret) { ehea_error("failed registering eHEA device driver on ebus"); - goto out; + goto out2; } ret = driver_create_file(&ehea_driver.driver, @@ -3353,21 +3574,33 @@ int __init ehea_module_init(void) if (ret) { ehea_error("failed to register capabilities attribute, ret=%d", ret); - unregister_reboot_notifier(&ehea_reboot_nb); - ibmebus_unregister_driver(&ehea_driver); - goto out; + goto out3; } + return ret; + +out3: + ibmebus_unregister_driver(&ehea_driver); +out2: + unregister_reboot_notifier(&ehea_reboot_nb); + crash_shutdown_unregister(&ehea_crash_handler); out: return ret; } static void __exit ehea_module_exit(void) { + int ret; + flush_scheduled_work(); driver_remove_file(&ehea_driver.driver, &driver_attr_capabilities); ibmebus_unregister_driver(&ehea_driver); unregister_reboot_notifier(&ehea_reboot_nb); + ret = crash_shutdown_unregister(&ehea_crash_handler); + if (ret) + ehea_info("failed unregistering crash handler"); + kfree(ehea_fw_handles.arr); + kfree(ehea_bcmc_regs.arr); ehea_destroy_busmap(); } -- cgit v1.2.2 From 5bd3670f31f1c58f500e55c4cdbc243fb4b2e3df Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Fri, 15 Feb 2008 15:08:04 -0600 Subject: fs_enet: Don't call phy_mii_ioctl() in atomic context. The lock acquisition in fs_ioctl() does not appear to actually be necessary, and thus is simply removed. Signed-off-by: Scott Wood Signed-off-by: Jeff Garzik --- drivers/net/fs_enet/fs_enet-main.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 42d94edeee26..af869cf9ae7d 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -946,16 +946,11 @@ static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct fs_enet_private *fep = netdev_priv(dev); struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data; - unsigned long flags; - int rc; if (!netif_running(dev)) return -EINVAL; - spin_lock_irqsave(&fep->lock, flags); - rc = phy_mii_ioctl(fep->phydev, mii, cmd); - spin_unlock_irqrestore(&fep->lock, flags); - return rc; + return phy_mii_ioctl(fep->phydev, mii, cmd); } extern int fs_mii_connect(struct net_device *dev); -- cgit v1.2.2 From 6cb5e57701d355737f0bc9f94c0f80ed69a95b62 Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Fri, 15 Feb 2008 14:05:25 -0800 Subject: igb: fix legacy mode irq issue I booted an igb kernel with the option pci=nomsi and instantly noticed that interrupts no longer worked on my igb device. I took a look at the interrupt initialization and quickly discovered a comment stating: "DO NOT USE EIAME or IAME in legacy mode" It seemed a bit odd that bits to enable IAM were being set in legacy interrupt mode, so I dropped out the following parts and interrupts began working fine again. [Updated code flow and a nitpick spelling error --Auke] Signed-off-by: Andy Gospodarek Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index bff280eff5e3..3480cc72467a 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -439,7 +439,7 @@ static int igb_request_irq(struct igb_adapter *adapter) err = igb_request_msix(adapter); if (!err) { /* enable IAM, auto-mask, - * DO NOT USE EIAME or IAME in legacy mode */ + * DO NOT USE EIAM or IAM in legacy mode */ wr32(E1000_IAM, IMS_ENABLE_MASK); goto request_done; } @@ -465,14 +465,9 @@ static int igb_request_irq(struct igb_adapter *adapter) err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED, netdev->name, netdev); - if (err) { + if (err) dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n", err); - goto request_done; - } - - /* enable IAM, auto-mask */ - wr32(E1000_IAM, IMS_ENABLE_MASK); request_done: return err; -- cgit v1.2.2 From 740db6d7f5bf194abf327613a5a500e3729fc19a Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Sun, 17 Feb 2008 11:53:49 -0700 Subject: update TULIP MAINTAINERS Kyle and I are co-maintaining tulip driver. Normally kyle will review my patchs and submit them. I'll deal with bugzilla.kernel.org bugs and try to resolve those bugs. Signed-off-by: Grant Grundler Signed-off-by: Jeff Garzik --- MAINTAINERS | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 36c7bc641dba..2333255417f4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3884,10 +3884,13 @@ M: trivial@kernel.org L: linux-kernel@vger.kernel.org S: Maintained -TULIP NETWORK DRIVER -L: tulip-users@lists.sourceforge.net -W: http://sourceforge.net/projects/tulip/ -S: Orphan +TULIP NETWORK DRIVERS +P: Grant Grundler +M: grundler@parisc-linux.org +P: Kyle McMartin +M: kyle@parisc-linux.org +L: netdev@vger.kernel.org +S: Maintained TUN/TAP driver P: Maxim Krasnyansky -- cgit v1.2.2 From 7a7d23dac29825a75e375800573d53e49d864a42 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Sun, 17 Feb 2008 11:30:23 -0700 Subject: uli526x partially recognizing interface Patch fixes: http://bugzilla.kernel.org/show_bug.cgi?id=5839 Init sequence needs to poll phy until phy reset is complete. This is the same problem that I fixed in 2002 in tulip driver. Thanks to manty@manty.net for testing this patch. Thanks to Pozsar Balazs for posting/testing a similar patch before: http://lkml.org/lkml/2006/8/21/45 Signed-off-by: Grant Grundler Signed-off-by: Jeff Garzik --- drivers/net/tulip/uli526x.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c index a7afeea156bd..a59c1f224aa8 100644 --- a/drivers/net/tulip/uli526x.c +++ b/drivers/net/tulip/uli526x.c @@ -482,9 +482,11 @@ static void uli526x_init(struct net_device *dev) struct uli526x_board_info *db = netdev_priv(dev); unsigned long ioaddr = db->ioaddr; u8 phy_tmp; + u8 timeout; u16 phy_value; u16 phy_reg_reset; + ULI526X_DBUG(0, "uli526x_init()", 0); /* Reset M526x MAC controller */ @@ -509,11 +511,19 @@ static void uli526x_init(struct net_device *dev) /* Parser SROM and media mode */ db->media_mode = uli526x_media_mode; - /* Phyxcer capability setting */ + /* phyxcer capability setting */ phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); phy_reg_reset = (phy_reg_reset | 0x8000); phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); + + /* See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management + * functions") or phy data sheet for details on phy reset + */ udelay(500); + timeout = 10; + while (timeout-- && + phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id) & 0x8000) + udelay(100); /* Process Phyxcer Media Mode */ uli526x_set_phyxcer(db); -- cgit v1.2.2 From d9d5dcc88ca5c72237e2d09d23a13a9b9d1e7445 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 18 Feb 2008 10:02:51 +0100 Subject: virtio_net: Fix oops on early interrupts - introduced by virtio reset code Signed-off-by: Jeff Garzik --- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fdc23678117b..19fd4cb0ddf8 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -361,6 +361,7 @@ static int virtnet_probe(struct virtio_device *vdev) netif_napi_add(dev, &vi->napi, virtnet_poll, napi_weight); vi->dev = dev; vi->vdev = vdev; + vdev->priv = vi; /* We expect two virtqueues, receive then send. */ vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done); @@ -395,7 +396,6 @@ static int virtnet_probe(struct virtio_device *vdev) } pr_debug("virtnet: registered device %s\n", dev->name); - vdev->priv = vi; return 0; unregister: -- cgit v1.2.2 From a80763c9090fe03a1af98f0106b2aaa4ad6502f9 Mon Sep 17 00:00:00 2001 From: Leonardo Potenza Date: Sun, 17 Feb 2008 18:23:15 +0100 Subject: drivers/net/cs89x0.c: compilation warning fix Suppress the warning message about the 'netcard_portlist' defined but not used. Signed-off-by: Leonardo Potenza Signed-off-by: Jeff Garzik --- drivers/net/cs89x0.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 571750975137..348371fda597 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -172,30 +172,30 @@ static char version[] __initdata = them to system IRQ numbers. This mapping is card specific and is set to the configuration of the Cirrus Eval board for this chip. */ #ifdef CONFIG_ARCH_CLPS7500 -static unsigned int netcard_portlist[] __initdata = +static unsigned int netcard_portlist[] __used __initdata = { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; static unsigned int cs8900_irq_map[] = {12,0,0,0}; #elif defined(CONFIG_SH_HICOSH4) -static unsigned int netcard_portlist[] __initdata = +static unsigned int netcard_portlist[] __used __initdata = { 0x0300, 0}; static unsigned int cs8900_irq_map[] = {1,0,0,0}; #elif defined(CONFIG_MACH_IXDP2351) -static unsigned int netcard_portlist[] __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; +static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; #include #elif defined(CONFIG_ARCH_IXDP2X01) #include -static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; +static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; #elif defined(CONFIG_ARCH_PNX010X) #include #include #define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */ #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ -static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0}; +static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0}; static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; #else -static unsigned int netcard_portlist[] __initdata = +static unsigned int netcard_portlist[] __used __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; static unsigned int cs8900_irq_map[] = {10,11,12,5}; #endif -- cgit v1.2.2 From 61da96be07ec860e260ca4af0199b9d48d000b80 Mon Sep 17 00:00:00 2001 From: Komuro Date: Mon, 18 Feb 2008 22:06:19 +0900 Subject: pcnet_cs: if AX88190-based card, printk "use axnet_cs instead" message. * If ConfigBase is 0x03c0 && manfid is (0x0149,0xc1ab), printk "use axnet_cs instead" message. Actually, most of the card with manfid(0x0149, 0xc1ab) use pcnet_cs driver. * remove entry (0x021b, 0x0202) Signed-off-by: Komuro Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/pcnet_cs.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 6323988dfa1d..fd8158a86f64 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -590,6 +590,13 @@ static int pcnet_config(struct pcmcia_device *link) dev->if_port = 0; } + if ((link->conf.ConfigBase == 0x03c0) + && (link->manf_id == 0x149) && (link->card_id = 0xc1ab)) { + printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n"); + printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n"); + goto failed; + } + local_hw_info = get_hwinfo(link); if (local_hw_info == NULL) local_hw_info = get_prom(link); @@ -1567,12 +1574,11 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145), PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230), PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530), -/* PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), conflict with axnet_cs */ + PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110), PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328), PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041), PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452), -/* PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), conflict with axnet_cs */ PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300), PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307), PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a), -- cgit v1.2.2 From f5154fbf4902744cdd2bb7548487ceaac9840fd2 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 18 Feb 2008 14:41:55 +0100 Subject: claw: make use of DIV_ROUND_UP The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. Signed-off-by: Ursula Braun Signed-off-by: Jeff Garzik --- drivers/s390/net/claw.c | 39 ++++++++++++++++++--------------------- 1 file changed, 18 insertions(+), 21 deletions(-) diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c index c3076217871e..d8a5c229c5a7 100644 --- a/drivers/s390/net/claw.c +++ b/drivers/s390/net/claw.c @@ -1851,8 +1851,7 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid) } } /* See how many write buffers are required to hold this data */ - numBuffers= ( skb->len + privptr->p_env->write_size - 1) / - ( privptr->p_env->write_size); + numBuffers = DIV_ROUND_UP(skb->len, privptr->p_env->write_size); /* If that number of buffers isn't available, give up for now */ if (privptr->write_free_count < numBuffers || @@ -2114,8 +2113,7 @@ init_ccw_bk(struct net_device *dev) */ ccw_blocks_perpage= PAGE_SIZE / CCWBK_SIZE; ccw_pages_required= - (ccw_blocks_required+ccw_blocks_perpage -1) / - ccw_blocks_perpage; + DIV_ROUND_UP(ccw_blocks_required, ccw_blocks_perpage); #ifdef DEBUGMSG printk(KERN_INFO "%s: %s() > ccw_blocks_perpage=%d\n", @@ -2131,30 +2129,29 @@ init_ccw_bk(struct net_device *dev) * provide good performance. With packing buffers support 32k * buffers are used. */ - if (privptr->p_env->read_size < PAGE_SIZE) { - claw_reads_perpage= PAGE_SIZE / privptr->p_env->read_size; - claw_read_pages= (privptr->p_env->read_buffers + - claw_reads_perpage -1) / claw_reads_perpage; + if (privptr->p_env->read_size < PAGE_SIZE) { + claw_reads_perpage = PAGE_SIZE / privptr->p_env->read_size; + claw_read_pages = DIV_ROUND_UP(privptr->p_env->read_buffers, + claw_reads_perpage); } else { /* > or equal */ - privptr->p_buff_pages_perread= - (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE; - claw_read_pages= - privptr->p_env->read_buffers * privptr->p_buff_pages_perread; + privptr->p_buff_pages_perread = + DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE); + claw_read_pages = privptr->p_env->read_buffers * + privptr->p_buff_pages_perread; } if (privptr->p_env->write_size < PAGE_SIZE) { - claw_writes_perpage= - PAGE_SIZE / privptr->p_env->write_size; - claw_write_pages= - (privptr->p_env->write_buffers + claw_writes_perpage -1) / - claw_writes_perpage; + claw_writes_perpage = + PAGE_SIZE / privptr->p_env->write_size; + claw_write_pages = DIV_ROUND_UP(privptr->p_env->write_buffers, + claw_writes_perpage); } else { /* > or equal */ - privptr->p_buff_pages_perwrite= - (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE; - claw_write_pages= - privptr->p_env->write_buffers * privptr->p_buff_pages_perwrite; + privptr->p_buff_pages_perwrite = + DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE); + claw_write_pages = privptr->p_env->write_buffers * + privptr->p_buff_pages_perwrite; } #ifdef DEBUGMSG if (privptr->p_env->read_size < PAGE_SIZE) { -- cgit v1.2.2 From 98e0f521456943801aacc7a4c0efb5b3bb6f89e0 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Mon, 18 Feb 2008 10:04:38 -0800 Subject: tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison Signed-off-by: Jeff Garzik --- drivers/net/tlan.c | 64 +++++++++++++++++++++++++++--------------------------- 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index 3af5b92b48c8..0166407d7061 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -1400,7 +1400,7 @@ static void TLan_SetMulticastList( struct net_device *dev ) * **************************************************************/ -u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int ) { /* printk( "TLAN: Invalid interrupt on %s.\n", dev->name ); */ return 0; @@ -1432,7 +1432,7 @@ u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); int eoc = 0; @@ -1518,7 +1518,7 @@ u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int ) { TLan_ReadAndClearStats( dev, TLAN_RECORD ); @@ -1554,7 +1554,7 @@ u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); u32 ack = 0; @@ -1689,7 +1689,7 @@ u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleDummy( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleDummy( struct net_device *dev, u16 host_int ) { printk( "TLAN: Test interrupt on %s.\n", dev->name ); return 1; @@ -1719,7 +1719,7 @@ u32 TLan_HandleDummy( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); TLanList *head_list; @@ -1767,7 +1767,7 @@ u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); u32 ack; @@ -1842,7 +1842,7 @@ u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); dma_addr_t head_list_phys; @@ -1902,7 +1902,7 @@ u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int ) * **************************************************************/ -void TLan_Timer( unsigned long data ) +static void TLan_Timer( unsigned long data ) { struct net_device *dev = (struct net_device *) data; TLanPrivateInfo *priv = netdev_priv(dev); @@ -1983,7 +1983,7 @@ void TLan_Timer( unsigned long data ) * **************************************************************/ -void TLan_ResetLists( struct net_device *dev ) +static void TLan_ResetLists( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); int i; @@ -2043,7 +2043,7 @@ void TLan_ResetLists( struct net_device *dev ) } /* TLan_ResetLists */ -void TLan_FreeLists( struct net_device *dev ) +static void TLan_FreeLists( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); int i; @@ -2092,7 +2092,7 @@ void TLan_FreeLists( struct net_device *dev ) * **************************************************************/ -void TLan_PrintDio( u16 io_base ) +static void TLan_PrintDio( u16 io_base ) { u32 data0, data1; int i; @@ -2127,7 +2127,7 @@ void TLan_PrintDio( u16 io_base ) * **************************************************************/ -void TLan_PrintList( TLanList *list, char *type, int num) +static void TLan_PrintList( TLanList *list, char *type, int num) { int i; @@ -2163,7 +2163,7 @@ void TLan_PrintList( TLanList *list, char *type, int num) * **************************************************************/ -void TLan_ReadAndClearStats( struct net_device *dev, int record ) +static void TLan_ReadAndClearStats( struct net_device *dev, int record ) { TLanPrivateInfo *priv = netdev_priv(dev); u32 tx_good, tx_under; @@ -2238,7 +2238,7 @@ void TLan_ReadAndClearStats( struct net_device *dev, int record ) * **************************************************************/ -void +static void TLan_ResetAdapter( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); @@ -2324,7 +2324,7 @@ TLan_ResetAdapter( struct net_device *dev ) -void +static void TLan_FinishReset( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); @@ -2448,7 +2448,7 @@ TLan_FinishReset( struct net_device *dev ) * **************************************************************/ -void TLan_SetMac( struct net_device *dev, int areg, char *mac ) +static void TLan_SetMac( struct net_device *dev, int areg, char *mac ) { int i; @@ -2490,7 +2490,7 @@ void TLan_SetMac( struct net_device *dev, int areg, char *mac ) * ********************************************************************/ -void TLan_PhyPrint( struct net_device *dev ) +static void TLan_PhyPrint( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 i, data0, data1, data2, data3, phy; @@ -2539,7 +2539,7 @@ void TLan_PhyPrint( struct net_device *dev ) * ********************************************************************/ -void TLan_PhyDetect( struct net_device *dev ) +static void TLan_PhyDetect( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 control; @@ -2586,7 +2586,7 @@ void TLan_PhyDetect( struct net_device *dev ) -void TLan_PhyPowerDown( struct net_device *dev ) +static void TLan_PhyPowerDown( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 value; @@ -2611,7 +2611,7 @@ void TLan_PhyPowerDown( struct net_device *dev ) -void TLan_PhyPowerUp( struct net_device *dev ) +static void TLan_PhyPowerUp( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 value; @@ -2632,7 +2632,7 @@ void TLan_PhyPowerUp( struct net_device *dev ) -void TLan_PhyReset( struct net_device *dev ) +static void TLan_PhyReset( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 phy; @@ -2660,7 +2660,7 @@ void TLan_PhyReset( struct net_device *dev ) -void TLan_PhyStartLink( struct net_device *dev ) +static void TLan_PhyStartLink( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 ability; @@ -2747,7 +2747,7 @@ void TLan_PhyStartLink( struct net_device *dev ) -void TLan_PhyFinishAutoNeg( struct net_device *dev ) +static void TLan_PhyFinishAutoNeg( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 an_adv; @@ -2903,7 +2903,7 @@ void TLan_PhyMonitor( struct net_device *dev ) * **************************************************************/ -int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val ) +static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val ) { u8 nack; u16 sio, tmp; @@ -2993,7 +2993,7 @@ int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val ) * **************************************************************/ -void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits ) +static void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits ) { u16 sio; u32 i; @@ -3035,7 +3035,7 @@ void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits ) * **************************************************************/ -void TLan_MiiSync( u16 base_port ) +static void TLan_MiiSync( u16 base_port ) { int i; u16 sio; @@ -3074,7 +3074,7 @@ void TLan_MiiSync( u16 base_port ) * **************************************************************/ -void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val ) +static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val ) { u16 sio; int minten; @@ -3144,7 +3144,7 @@ void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val ) * **************************************************************/ -void TLan_EeSendStart( u16 io_base ) +static void TLan_EeSendStart( u16 io_base ) { u16 sio; @@ -3184,7 +3184,7 @@ void TLan_EeSendStart( u16 io_base ) * **************************************************************/ -int TLan_EeSendByte( u16 io_base, u8 data, int stop ) +static int TLan_EeSendByte( u16 io_base, u8 data, int stop ) { int err; u8 place; @@ -3245,7 +3245,7 @@ int TLan_EeSendByte( u16 io_base, u8 data, int stop ) * **************************************************************/ -void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop ) +static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop ) { u8 place; u16 sio; @@ -3303,7 +3303,7 @@ void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop ) * **************************************************************/ -int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data ) +static int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data ) { int err; TLanPrivateInfo *priv = netdev_priv(dev); -- cgit v1.2.2 From 563e0ae06ff18f0b280f11cf706ba0172255ce52 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Mon, 18 Feb 2008 21:20:32 +0100 Subject: sis190: read the mac address from the eeprom first Reading a serie of zero from the cmos sram area do not work well with is_valid_ether_addr(). Let's read the mac address from the eeprom first as it seems more reliable. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=9831 Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 202fdf356621..20745fd4e973 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1633,13 +1633,18 @@ static inline void sis190_init_rxfilter(struct net_device *dev) static int __devinit sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev) { - u8 from; + int rc; + + rc = sis190_get_mac_addr_from_eeprom(pdev, dev); + if (rc < 0) { + u8 reg; - pci_read_config_byte(pdev, 0x73, &from); + pci_read_config_byte(pdev, 0x73, ®); - return (from & 0x00000001) ? - sis190_get_mac_addr_from_apc(pdev, dev) : - sis190_get_mac_addr_from_eeprom(pdev, dev); + if (reg & 0x00000001) + rc = sis190_get_mac_addr_from_apc(pdev, dev); + } + return rc; } static void sis190_set_speed_auto(struct net_device *dev) -- cgit v1.2.2 From cf7822983f21617b805712eec46eb31058508d6a Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 18 Feb 2008 17:24:30 -0600 Subject: gianfar: don't pass NULL dev ptr to DMA ops Change all dma op invocations in gianfar.c to actually pass in the device pointer. Currently, the value is ignored, but it will be used going forward as we implement archdata for 32-bit powerpc. Signed-off-by: Becky Bruce Acked-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 4244fc282f21..718cf77e345a 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -605,7 +605,7 @@ void stop_gfar(struct net_device *dev) free_skb_resources(priv); - dma_free_coherent(NULL, + dma_free_coherent(&dev->dev, sizeof(struct txbd8)*priv->tx_ring_size + sizeof(struct rxbd8)*priv->rx_ring_size, priv->tx_bd_base, @@ -626,7 +626,7 @@ static void free_skb_resources(struct gfar_private *priv) for (i = 0; i < priv->tx_ring_size; i++) { if (priv->tx_skbuff[i]) { - dma_unmap_single(NULL, txbdp->bufPtr, + dma_unmap_single(&priv->dev->dev, txbdp->bufPtr, txbdp->length, DMA_TO_DEVICE); dev_kfree_skb_any(priv->tx_skbuff[i]); @@ -643,7 +643,7 @@ static void free_skb_resources(struct gfar_private *priv) if(priv->rx_skbuff != NULL) { for (i = 0; i < priv->rx_ring_size; i++) { if (priv->rx_skbuff[i]) { - dma_unmap_single(NULL, rxbdp->bufPtr, + dma_unmap_single(&priv->dev->dev, rxbdp->bufPtr, priv->rx_buffer_size, DMA_FROM_DEVICE); @@ -708,7 +708,7 @@ int startup_gfar(struct net_device *dev) gfar_write(®s->imask, IMASK_INIT_CLEAR); /* Allocate memory for the buffer descriptors */ - vaddr = (unsigned long) dma_alloc_coherent(NULL, + vaddr = (unsigned long) dma_alloc_coherent(&dev->dev, sizeof (struct txbd8) * priv->tx_ring_size + sizeof (struct rxbd8) * priv->rx_ring_size, &addr, GFP_KERNEL); @@ -919,7 +919,7 @@ err_irq_fail: rx_skb_fail: free_skb_resources(priv); tx_skb_fail: - dma_free_coherent(NULL, + dma_free_coherent(&dev->dev, sizeof(struct txbd8)*priv->tx_ring_size + sizeof(struct rxbd8)*priv->rx_ring_size, priv->tx_bd_base, @@ -1053,7 +1053,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Set buffer length and pointer */ txbdp->length = skb->len; - txbdp->bufPtr = dma_map_single(NULL, skb->data, + txbdp->bufPtr = dma_map_single(&dev->dev, skb->data, skb->len, DMA_TO_DEVICE); /* Save the skb pointer so we can free it later */ @@ -1332,7 +1332,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) */ skb_reserve(skb, alignamount); - bdp->bufPtr = dma_map_single(NULL, skb->data, + bdp->bufPtr = dma_map_single(&dev->dev, skb->data, priv->rx_buffer_size, DMA_FROM_DEVICE); bdp->length = 0; -- cgit v1.2.2 From 68707acb5b5d4e2b7583cbff0883516afed54d4f Mon Sep 17 00:00:00 2001 From: Bill Hayes Date: Tue, 19 Feb 2008 10:24:41 -0800 Subject: igb: Fix panic with NICs with 1000BASE-SX PHY This patch eliminates a kernel panic with the igb driver in 2.6.25-rc2 when running on a Intel 82575 Ethernet controller with a 1000BASE-SX PHY. The panic does not happen with the 1000BASE-T PHY, only with a SX connection. Signed-off-by: Bill Hayes Signed-off-by: Andy Gospodarek Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 3480cc72467a..6a1f23092099 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -816,7 +816,8 @@ void igb_reset(struct igb_adapter *adapter) wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE); igb_reset_adaptive(&adapter->hw); - adapter->hw.phy.ops.get_phy_info(&adapter->hw); + if (adapter->hw.phy.ops.get_phy_info) + adapter->hw.phy.ops.get_phy_info(&adapter->hw); } /** @@ -2052,7 +2053,8 @@ static void igb_set_multi(struct net_device *netdev) static void igb_update_phy_info(unsigned long data) { struct igb_adapter *adapter = (struct igb_adapter *) data; - adapter->hw.phy.ops.get_phy_info(&adapter->hw); + if (adapter->hw.phy.ops.get_phy_info) + adapter->hw.phy.ops.get_phy_info(&adapter->hw); } /** -- cgit v1.2.2 From d1e7fe4d92742dd1aa28ca11512628adc79a904b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 20 Feb 2008 02:13:53 +0200 Subject: net/phy/mdio_bus.c: fix a check-after-use This patch fixes a check-after-use spotted by the Coverity checker. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/phy/mdio_bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 6e9f619c491f..963630c65ca9 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -49,13 +49,13 @@ int mdiobus_register(struct mii_bus *bus) int i; int err = 0; - mutex_init(&bus->mdio_lock); - if (NULL == bus || NULL == bus->name || NULL == bus->read || NULL == bus->write) return -EINVAL; + mutex_init(&bus->mdio_lock); + if (bus->reset) bus->reset(bus); -- cgit v1.2.2 From f11cf25ef345a320b152aa68a014c8a65cf4ed44 Mon Sep 17 00:00:00 2001 From: Laura Garcia Date: Sat, 23 Feb 2008 18:56:35 +0100 Subject: [netdrvr] via-rhine: Use register offset definition for WOLcgClr Use register offset definition for WOLcgClr, rather than a magic number. This patch does not change the driver behaviour. Signed-off-by: Laura Garcia Liebana Signed-off-by: Jeff Garzik --- drivers/net/via-rhine.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 7c851b1e6daa..8c9d6ae2bb31 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -1893,7 +1893,7 @@ static void rhine_shutdown (struct pci_dev *pdev) /* Make sure we use pattern 0, 1 and not 4, 5 */ if (rp->quirks & rq6patterns) - iowrite8(0x04, ioaddr + 0xA7); + iowrite8(0x04, ioaddr + WOLcgClr); if (rp->wolopts & WAKE_MAGIC) { iowrite8(WOLmagic, ioaddr + WOLcrSet); -- cgit v1.2.2 From a84d0a3d6909c871bfa617a45a7517ce9292d4fb Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 22 Feb 2008 16:00:33 -0800 Subject: sky2: fix LED management Fix problems in LED management, so ethtool -p works correctly on Yukon-EC and other chips. The driver was incorrectly setting the PHY LED overide bits. Moral: read the spec sheet, not the vendor driver. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 123 ++++++++++++++++++++++++++--------------------------- drivers/net/sky2.h | 27 ++++++------ 2 files changed, 76 insertions(+), 74 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 9a6295909e43..54c662690f65 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -572,8 +572,9 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) default: /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; + /* turn off the Rx LED (LED_RX) */ - ledover &= ~PHY_M_LED_MO_RX; + ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); } if (hw->chip_id == CHIP_ID_YUKON_EC_U && @@ -602,7 +603,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { /* turn on 100 Mbps LED (LED_LINK100) */ - ledover |= PHY_M_LED_MO_100; + ledover |= PHY_M_LED_MO_100(MO_LED_ON); } if (ledover) @@ -3322,82 +3323,80 @@ static void sky2_set_multicast(struct net_device *dev) /* Can have one global because blinking is controlled by * ethtool and that is always under RTNL mutex */ -static void sky2_led(struct sky2_hw *hw, unsigned port, int on) +static void sky2_led(struct sky2_port *sky2, enum led_mode mode) { - u16 pg; + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; - switch (hw->chip_id) { - case CHIP_ID_YUKON_XL: + spin_lock_bh(&sky2->phy_lock); + if (hw->chip_id == CHIP_ID_YUKON_EC_U || + hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_SUPR) { + u16 pg; pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, - on ? (PHY_M_LEDC_LOS_CTRL(1) | - PHY_M_LEDC_INIT_CTRL(7) | - PHY_M_LEDC_STA1_CTRL(7) | - PHY_M_LEDC_STA0_CTRL(7)) - : 0); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - break; + switch (mode) { + case MO_LED_OFF: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(8) | + PHY_M_LEDC_INIT_CTRL(8) | + PHY_M_LEDC_STA1_CTRL(8) | + PHY_M_LEDC_STA0_CTRL(8)); + break; + case MO_LED_ON: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(9) | + PHY_M_LEDC_INIT_CTRL(9) | + PHY_M_LEDC_STA1_CTRL(9) | + PHY_M_LEDC_STA0_CTRL(9)); + break; + case MO_LED_BLINK: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(0xa) | + PHY_M_LEDC_INIT_CTRL(0xa) | + PHY_M_LEDC_STA1_CTRL(0xa) | + PHY_M_LEDC_STA0_CTRL(0xa)); + break; + case MO_LED_NORM: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(1) | + PHY_M_LEDC_INIT_CTRL(8) | + PHY_M_LEDC_STA1_CTRL(7) | + PHY_M_LEDC_STA0_CTRL(7)); + } - default: - gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + } else gm_phy_write(hw, port, PHY_MARV_LED_OVER, - on ? PHY_M_LED_ALL : 0); - } + PHY_M_LED_MO_DUP(mode) | + PHY_M_LED_MO_10(mode) | + PHY_M_LED_MO_100(mode) | + PHY_M_LED_MO_1000(mode) | + PHY_M_LED_MO_RX(mode) | + PHY_M_LED_MO_TX(mode)); + + spin_unlock_bh(&sky2->phy_lock); } /* blink LED's for finding board */ static int sky2_phys_id(struct net_device *dev, u32 data) { struct sky2_port *sky2 = netdev_priv(dev); - struct sky2_hw *hw = sky2->hw; - unsigned port = sky2->port; - u16 ledctrl, ledover = 0; - long ms; - int interrupted; - int onoff = 1; + unsigned int i; - if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ)) - ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT); - else - ms = data * 1000; - - /* save initial values */ - spin_lock_bh(&sky2->phy_lock); - if (hw->chip_id == CHIP_ID_YUKON_XL) { - u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - } else { - ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL); - ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER); - } - - interrupted = 0; - while (!interrupted && ms > 0) { - sky2_led(hw, port, onoff); - onoff = !onoff; - - spin_unlock_bh(&sky2->phy_lock); - interrupted = msleep_interruptible(250); - spin_lock_bh(&sky2->phy_lock); - - ms -= 250; - } + if (data == 0) + data = UINT_MAX; - /* resume regularly scheduled programming */ - if (hw->chip_id == CHIP_ID_YUKON_XL) { - u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - } else { - gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); - gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + for (i = 0; i < data; i++) { + sky2_led(sky2, MO_LED_ON); + if (msleep_interruptible(500)) + break; + sky2_led(sky2, MO_LED_OFF); + if (msleep_interruptible(500)) + break; } - spin_unlock_bh(&sky2->phy_lock); + sky2_led(sky2, MO_LED_NORM); return 0; } diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 5ab5c1c7c5aa..7bb3ba9bcbd8 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1318,18 +1318,21 @@ enum { BLINK_670MS = 4,/* 670 ms */ }; -/**** PHY_MARV_LED_OVER 16 bit r/w LED control */ -enum { - PHY_M_LED_MO_DUP = 3<<10,/* Bit 11..10: Duplex */ - PHY_M_LED_MO_10 = 3<<8, /* Bit 9.. 8: Link 10 */ - PHY_M_LED_MO_100 = 3<<6, /* Bit 7.. 6: Link 100 */ - PHY_M_LED_MO_1000 = 3<<4, /* Bit 5.. 4: Link 1000 */ - PHY_M_LED_MO_RX = 3<<2, /* Bit 3.. 2: Rx */ - PHY_M_LED_MO_TX = 3<<0, /* Bit 1.. 0: Tx */ - - PHY_M_LED_ALL = PHY_M_LED_MO_DUP | PHY_M_LED_MO_10 - | PHY_M_LED_MO_100 | PHY_M_LED_MO_1000 - | PHY_M_LED_MO_RX, +/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ +#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */ + +#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */ +#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */ +#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */ +#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */ +#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */ +#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */ + +enum led_mode { + MO_LED_NORM = 0, + MO_LED_BLINK = 1, + MO_LED_OFF = 2, + MO_LED_ON = 3, }; /***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ -- cgit v1.2.2 From 179956f498bd8cc55fb803c4ee0cf18be59c8b01 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 21 Feb 2008 22:50:54 +0900 Subject: macb: Fix speed setting Fix NCFGR.SPD setting on 10Mbps. This bug was introduced by conversion to generic PHY layer in kernel 2.6.23. Signed-off-by: Atsushi Nemoto Signed-off-by: Jeff Garzik --- drivers/net/macb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 81bf005ff280..1d210ed46130 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -148,7 +148,7 @@ static void macb_handle_link_change(struct net_device *dev) if (phydev->duplex) reg |= MACB_BIT(FD); - if (phydev->speed) + if (phydev->speed == SPEED_100) reg |= MACB_BIT(SPD); macb_writel(bp, NCFGR, reg); -- cgit v1.2.2 From ac0b3509f048b34ba1b60f164fd811b7cbdbc27a Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 21 Feb 2008 15:10:41 -0800 Subject: ixgb: add RNBC counter - no buffer count - to ethtool stats This counter is valuable to determine if the system is unable to timely return buffers to the hardware and this counter starts to increase well before the hardware starts to drop packets. If users experience rx_no_buffer_count increasing, they should increase the amount of descriptors. That will provide more buffers for the hardware and will decrease the chance of hard drops. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_ethtool.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 53a9fd086f96..75f3a68ee354 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -67,6 +67,7 @@ static struct ixgb_stats ixgb_gstrings_stats[] = { {"rx_over_errors", IXGB_STAT(net_stats.rx_over_errors)}, {"rx_crc_errors", IXGB_STAT(net_stats.rx_crc_errors)}, {"rx_frame_errors", IXGB_STAT(net_stats.rx_frame_errors)}, + {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)}, {"rx_fifo_errors", IXGB_STAT(net_stats.rx_fifo_errors)}, {"rx_missed_errors", IXGB_STAT(net_stats.rx_missed_errors)}, {"tx_aborted_errors", IXGB_STAT(net_stats.tx_aborted_errors)}, -- cgit v1.2.2 From 31f8c4fe5d24376c15e18e2936cfa18cd7e5d917 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 21 Feb 2008 15:10:47 -0800 Subject: e1000e: 82573 can use eerd method to read eeprom This simplifies the 82571/2/3 family initialization a bit and removes an initialization table no longer needed. Signed-off-by: Auke Kok Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/e1000e/82571.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 3beace55b58d..f7ffd35c8a43 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1280,16 +1280,6 @@ static struct e1000_phy_operations e82_phy_ops_m88 = { }; static struct e1000_nvm_operations e82571_nvm_ops = { - .acquire_nvm = e1000_acquire_nvm_82571, - .read_nvm = e1000e_read_nvm_spi, - .release_nvm = e1000_release_nvm_82571, - .update_nvm = e1000_update_nvm_checksum_82571, - .valid_led_default = e1000_valid_led_default_82571, - .validate_nvm = e1000_validate_nvm_checksum_82571, - .write_nvm = e1000_write_nvm_82571, -}; - -static struct e1000_nvm_operations e82573_nvm_ops = { .acquire_nvm = e1000_acquire_nvm_82571, .read_nvm = e1000e_read_nvm_eerd, .release_nvm = e1000_release_nvm_82571, @@ -1355,6 +1345,6 @@ struct e1000_info e1000_82573_info = { .get_invariants = e1000_get_invariants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_m88, - .nvm_ops = &e82573_nvm_ops, + .nvm_ops = &e82571_nvm_ops, }; -- cgit v1.2.2 From 03ae221fe9987e22679642b5b687aebbb67bbb47 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 21 Feb 2008 15:10:52 -0800 Subject: e1000e: fix link up message to show ethX: Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/e1000.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 8b88c226e858..327c0620da31 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -42,8 +42,7 @@ struct e1000_info; #define ndev_printk(level, netdev, format, arg...) \ - printk(level "%s: %s: " format, (netdev)->dev.parent->bus_id, \ - (netdev)->name, ## arg) + printk(level "%s: " format, (netdev)->name, ## arg) #ifdef DEBUG #define ndev_dbg(netdev, format, arg...) \ -- cgit v1.2.2 From 4a5694e66428607585c9f4dd14bcf4158d2de191 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 21 Feb 2008 15:10:57 -0800 Subject: e1000e: fix flow control when using ethtool overrides Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/lib.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 16f35fadb74b..0860b5fb3471 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -589,9 +589,6 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) s32 ret_val; u16 nvm_data; - if (mac->fc != e1000_fc_default) - return 0; - /* Read and store word 0x0F of the EEPROM. This word contains bits * that determine the hardware's default PAUSE (flow control) mode, * a bit that determines whether the HW defaults to enabling or -- cgit v1.2.2 From de92d84ec2305c490aa1db33f6e40680f8c236a8 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 21 Feb 2008 15:11:02 -0800 Subject: e1000e: fix flow control denial of service possibility this patch avoids a denial of service from an evildoer sending a continuous stream of flow control at our adapter that is plugged into a non-flow control enabled switch. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/lib.c | 31 +++++-------------------------- 1 file changed, 5 insertions(+), 26 deletions(-) diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 0860b5fb3471..341d74e81fb0 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1104,34 +1104,13 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { mac->fc = e1000_fc_rx_pause; hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); - } - /* Per the IEEE spec, at this point flow control should be - * disabled. However, we want to consider that we could - * be connected to a legacy switch that doesn't advertise - * desired flow control, but can be forced on the link - * partner. So if we advertised no flow control, that is - * what we will resolve to. If we advertised some kind of - * receive capability (Rx Pause Only or Full Flow Control) - * and the link partner advertised none, we will configure - * ourselves to enable Rx Flow Control only. We can do - * this safely for two reasons: If the link partner really - * didn't want flow control enabled, and we enable Rx, no - * harm done since we won't be receiving any PAUSE frames - * anyway. If the intent on the link partner was to have - * flow control enabled, then by us enabling RX only, we - * can at least receive pause frames and process them. - * This is a good idea because in most cases, since we are - * predominantly a server NIC, more times than not we will - * be asked to delay transmission of packets than asking - * our link partner to pause transmission of frames. - */ - else if ((mac->original_fc == e1000_fc_none) || - (mac->original_fc == e1000_fc_tx_pause)) { + } else { + /* + * Per the IEEE spec, at this point flow control + * should be disabled. + */ mac->fc = e1000_fc_none; hw_dbg(hw, "Flow Control = NONE.\r\n"); - } else { - mac->fc = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); } /* Now we need to do one last check... If we auto- -- cgit v1.2.2 From 489815ce224e75c2fcd5ebdfaa740d7f9a4f20d3 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 21 Feb 2008 15:11:07 -0800 Subject: e1000e: fix spelling errors in comments Fix some spelling errors and inconsistencies in comment blocks. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/82571.c | 10 +++++----- drivers/net/e1000e/defines.h | 10 +++++----- drivers/net/e1000e/hw.h | 4 ++-- drivers/net/e1000e/ich8lan.c | 24 ++++++++++++------------ drivers/net/e1000e/lib.c | 16 ++++++++-------- drivers/net/e1000e/netdev.c | 16 +++++++++------- drivers/net/e1000e/phy.c | 10 +++++----- 7 files changed, 46 insertions(+), 44 deletions(-) diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index f7ffd35c8a43..7fe20310eb5f 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -438,7 +438,7 @@ static void e1000_release_nvm_82571(struct e1000_hw *hw) * For non-82573 silicon, write data to EEPROM at offset using SPI interface. * * If e1000e_update_nvm_checksum is not called after this function, the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) @@ -547,7 +547,7 @@ static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw) * poll for completion. * * If e1000e_update_nvm_checksum is not called after this function, the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) @@ -1053,7 +1053,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) /* If SerDes loopback mode is entered, there is no form * of reset to take the adapter out of that mode. So we * have to explicitly take the adapter out of loopback - * mode. This prevents drivers from twidling their thumbs + * mode. This prevents drivers from twiddling their thumbs * if another tool failed to take it out of loopback mode. */ ew32(SCTL, @@ -1098,7 +1098,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) * e1000e_get_laa_state_82571 - Get locally administered address state * @hw: pointer to the HW structure * - * Retrieve and return the current locally administed address state. + * Retrieve and return the current locally administered address state. **/ bool e1000e_get_laa_state_82571(struct e1000_hw *hw) { @@ -1113,7 +1113,7 @@ bool e1000e_get_laa_state_82571(struct e1000_hw *hw) * @hw: pointer to the HW structure * @state: enable/disable locally administered address * - * Enable/Disable the current locally administed address state. + * Enable/Disable the current locally administers address state. **/ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) { diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 6232c3e96689..a4f511f549f7 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -66,7 +66,7 @@ #define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ /* Extended Device Control */ -#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ +#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */ #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 @@ -75,12 +75,12 @@ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ -/* Receive Decriptor bit definitions */ +/* Receive Descriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ @@ -223,7 +223,7 @@ #define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */ #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ -/* Constants used to intrepret the masked PCI-X bus speed. */ +/* Constants used to interpret the masked PCI-X bus speed. */ #define HALF_DUPLEX 1 #define FULL_DUPLEX 2 @@ -517,7 +517,7 @@ /* PHY 1000 MII Register/Bit Definitions */ /* PHY Registers defined by IEEE */ #define PHY_CONTROL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Regiser */ +#define PHY_STATUS 0x01 /* Status Register */ #define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ #define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 3c5862f97dbf..916025b30fc3 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -184,7 +184,7 @@ enum e1e_registers { E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */ E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */ E1000_RXCSUM = 0x05000, /* RX Checksum Control - RW */ - E1000_RFCTL = 0x05008, /* Receive Filter Control*/ + E1000_RFCTL = 0x05008, /* Receive Filter Control */ E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */ E1000_RA = 0x05400, /* Receive Address - RW Array */ E1000_VFTA = 0x05600, /* VLAN Filter Table Array - RW Array */ @@ -202,7 +202,7 @@ enum e1e_registers { E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */ E1000_SWSM = 0x05B50, /* SW Semaphore */ E1000_FWSM = 0x05B54, /* FW Semaphore */ - E1000_HICR = 0x08F00, /* Host Inteface Control */ + E1000_HICR = 0x08F00, /* Host Interface Control */ }; /* RSS registers */ diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 8f8139de1f48..0ae39550768d 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -671,7 +671,7 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw) * e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY * @hw: pointer to the HW structure * - * Polarity is determined on the polarity reveral feature being enabled. + * Polarity is determined on the polarity reversal feature being enabled. * This function is only called by other family-specific * routines. **/ @@ -947,7 +947,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) /* Either we should have a hardware SPI cycle in progress * bit to check against, in order to start a new cycle or * FDONE bit should be changed in the hardware so that it - * is 1 after harware reset, which can then be used as an + * is 1 after hardware reset, which can then be used as an * indication whether a cycle is in progress or has been * completed. */ @@ -1155,7 +1155,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, * which writes the checksum to the shadow ram. The changes in the shadow * ram are then committed to the EEPROM by processing each bank at a time * checking for the modified bit and writing only the pending changes. - * After a succesful commit, the shadow ram is cleared and is ready for + * After a successful commit, the shadow ram is cleared and is ready for * future writes. **/ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) @@ -1680,7 +1680,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) * - initialize LED identification * - setup receive address registers * - setup flow control - * - setup transmit discriptors + * - setup transmit descriptors * - clear statistics **/ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) @@ -1961,7 +1961,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, phy_ctrl); - /* Call gig speed drop workaround on Giga disable before accessing + /* Call gig speed drop workaround on Gig disable before accessing * any PHY registers */ e1000e_gig_downshift_workaround_ich8lan(hw); @@ -1972,7 +1972,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) /** * e1000_set_kmrn_lock_loss_workaound_ich8lan - Set Kumeran workaround state * @hw: pointer to the HW structure - * @state: boolean value used to set the current Kumaran workaround state + * @state: boolean value used to set the current Kumeran workaround state * * If ICH8, set the current Kumeran workaround state (enabled - TRUE * /disabled - FALSE). @@ -2017,7 +2017,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, reg); - /* Call gig speed drop workaround on Giga disable before + /* Call gig speed drop workaround on Gig disable before * accessing any PHY registers */ if (hw->mac.type == e1000_ich8lan) e1000e_gig_downshift_workaround_ich8lan(hw); @@ -2045,7 +2045,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) * @hw: pointer to the HW structure * * Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC), - * LPLU, Giga disable, MDIC PHY reset): + * LPLU, Gig disable, MDIC PHY reset): * 1) Set Kumeran Near-end loopback * 2) Clear Kumeran Near-end loopback * Should only be called for ICH8[m] devices with IGP_3 Phy. @@ -2089,10 +2089,10 @@ static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw) } /** - * e1000_led_on_ich8lan - Turn LED's on + * e1000_led_on_ich8lan - Turn LEDs on * @hw: pointer to the HW structure * - * Turn on the LED's. + * Turn on the LEDs. **/ static s32 e1000_led_on_ich8lan(struct e1000_hw *hw) { @@ -2105,10 +2105,10 @@ static s32 e1000_led_on_ich8lan(struct e1000_hw *hw) } /** - * e1000_led_off_ich8lan - Turn LED's off + * e1000_led_off_ich8lan - Turn LEDs off * @hw: pointer to the HW structure * - * Turn off the LED's. + * Turn off the LEDs. **/ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw) { diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 341d74e81fb0..95f75a43c9f9 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1140,7 +1140,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } /** - * e1000e_get_speed_and_duplex_copper - Retreive current speed/duplex + * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex @@ -1176,7 +1176,7 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup } /** - * e1000e_get_speed_and_duplex_fiber_serdes - Retreive current speed/duplex + * e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex @@ -1386,7 +1386,7 @@ s32 e1000e_cleanup_led_generic(struct e1000_hw *hw) * e1000e_blink_led - Blink LED * @hw: pointer to the HW structure * - * Blink the led's which are set to be on. + * Blink the LEDs which are set to be on. **/ s32 e1000e_blink_led(struct e1000_hw *hw) { @@ -1491,7 +1491,7 @@ void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop) * @hw: pointer to the HW structure * * Returns 0 if successful, else returns -10 - * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued + * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused * the master requests to be disabled. * * Disables PCI-Express master access and verifies there are no pending @@ -1852,7 +1852,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) } /** - * e1000e_read_nvm_spi - Read EEPROM's using SPI + * e1000e_read_nvm_spi - Reads EEPROM using SPI * @hw: pointer to the HW structure * @offset: offset of word in the EEPROM to read * @words: number of words to read @@ -1956,7 +1956,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) * Writes data to EEPROM at offset using SPI interface. * * If e1000e_update_nvm_checksum is not called after this function , the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { @@ -2198,7 +2198,7 @@ static u8 e1000_calculate_checksum(u8 *buffer, u32 length) * * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND * - * This function checks whether the HOST IF is enabled for command operaton + * This function checks whether the HOST IF is enabled for command operation * and also checks whether the previous command is completed. It busy waits * in case of previous command is not completed. **/ @@ -2230,7 +2230,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) } /** - * e1000e_check_mng_mode - check managament mode + * e1000e_check_mng_mode - check management mode * @hw: pointer to the HW structure * * Reads the firmware semaphore register and returns true (>0) if diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 3031d6d16247..7824bc2993a7 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1006,7 +1006,7 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) * e1000_get_hw_control - get control of the h/w from f/w * @adapter: address of board private structure * - * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit. + * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that * the driver is loaded. For AMT version (only with 82573) * of the f/w this means that the network i/f is open. @@ -1032,7 +1032,7 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter) * e1000_release_hw_control - release control of the h/w to f/w * @adapter: address of board private structure * - * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit. + * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that the * driver is no longer loaded. For AMT version (only with 82573) i * of the f/w this means that the network i/f is closed. @@ -1241,6 +1241,11 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter) /** * e1000_update_itr - update the dynamic ITR value based on statistics + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + * * Stores a new ITR value based on packets and byte * counts during the last interrupt. The advantage of per interrupt * computation is faster updates and more accurate ITR for the current @@ -1250,10 +1255,6 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter) * while increasing bulk throughput. * this functionality is controlled by the InterruptThrottleRate module * parameter (see e1000_param.c) - * @adapter: pointer to adapter - * @itr_setting: current adapter->itr - * @packets: the number of packets during this measurement interval - * @bytes: the number of bytes during this measurement interval **/ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, u16 itr_setting, int packets, @@ -1366,6 +1367,7 @@ set_itr_now: /** * e1000_clean - NAPI Rx polling callback * @adapter: board private structure + * @budget: amount of packets driver is allowed to process this poll **/ static int e1000_clean(struct napi_struct *napi, int budget) { @@ -2000,7 +2002,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) e1000_check_reset_block(hw)) return; - /* managebility (AMT) is enabled */ + /* manageability (AMT) is enabled */ if (er32(MANC) & E1000_MANC_SMBUS_EN) return; diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index fc6fee112f1c..dab3c468a768 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -121,7 +121,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw) * @offset: register offset to be read * @data: pointer to the read data * - * Reads the MDI control regsiter in the PHY at offset and stores the + * Reads the MDI control register in the PHY at offset and stores the * information read to data. **/ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) @@ -1172,7 +1172,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active) } /** - * e1000e_check_downshift - Checks whether a downshift in speed occured + * e1000e_check_downshift - Checks whether a downshift in speed occurred * @hw: pointer to the HW structure * * Success returns 0, Failure returns 1 @@ -1388,8 +1388,8 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw) * * The automatic gain control (agc) normalizes the amplitude of the * received signal, adjusting for the attenuation produced by the - * cable. By reading the AGC registers, which reperesent the - * cobination of course and fine gain value, the value can be put + * cable. By reading the AGC registers, which represent the + * combination of course and fine gain value, the value can be put * into a lookup table to obtain the approximate cable length * for each channel. **/ @@ -1619,7 +1619,7 @@ s32 e1000e_phy_sw_reset(struct e1000_hw *hw) * Verify the reset block is not blocking us from resetting. Acquire * semaphore (if necessary) and read/set/write the device control reset * bit in the PHY. Wait the appropriate delay time for the device to - * reset and relase the semaphore (if necessary). + * reset and release the semaphore (if necessary). **/ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) { -- cgit v1.2.2 From 3bf319a787a881aa6ad8213b98b93b8de2b6f0e0 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 21 Feb 2008 15:11:13 -0800 Subject: e1000e: remove unused read value in ASPM disable code. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/netdev.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 7824bc2993a7..fc5c63f4f578 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3490,7 +3490,6 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) static void e1000e_disable_l1aspm(struct pci_dev *pdev) { int pos; - u32 cap; u16 val; /* @@ -3505,7 +3504,6 @@ static void e1000e_disable_l1aspm(struct pci_dev *pdev) * active. */ pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); - pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, &cap); pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val); if (val & 0x2) { dev_warn(&pdev->dev, "Disabling L1 ASPM\n"); -- cgit v1.2.2 From 5f2f40a92e007ec5b503db20f3f70cb331c64f65 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sun, 24 Feb 2008 18:38:31 -0800 Subject: tipc: fix integer as NULL pointer sparse warnings in tipc net/tipc/cluster.c:145:2: warning: Using plain integer as NULL pointer net/tipc/link.c:3254:36: warning: Using plain integer as NULL pointer net/tipc/ref.c:151:15: warning: Using plain integer as NULL pointer net/tipc/zone.c:85:2: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- net/tipc/cluster.c | 2 +- net/tipc/link.c | 2 +- net/tipc/ref.c | 2 +- net/tipc/zone.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/net/tipc/cluster.c b/net/tipc/cluster.c index 95b373913aa0..4bb3404f610b 100644 --- a/net/tipc/cluster.c +++ b/net/tipc/cluster.c @@ -142,7 +142,7 @@ void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr) max_n_num = tipc_highest_allowed_slave; assert(n_num > 0); assert(n_num <= max_n_num); - assert(c_ptr->nodes[n_num] == 0); + assert(c_ptr->nodes[n_num] == NULL); c_ptr->nodes[n_num] = n_ptr; if (n_num > c_ptr->highest_node) c_ptr->highest_node = n_num; diff --git a/net/tipc/link.c b/net/tipc/link.c index 1b17fecee747..cefa99824c58 100644 --- a/net/tipc/link.c +++ b/net/tipc/link.c @@ -3251,7 +3251,7 @@ static void link_print(struct link *l_ptr, struct print_buf *buf, if ((mod(msg_seqno(buf_msg(l_ptr->last_out)) - msg_seqno(buf_msg(l_ptr->first_out))) != (l_ptr->out_queue_size - 1)) - || (l_ptr->last_out->next != 0)) { + || (l_ptr->last_out->next != NULL)) { tipc_printf(buf, "\nSend queue inconsistency\n"); tipc_printf(buf, "first_out= %x ", l_ptr->first_out); tipc_printf(buf, "next_out= %x ", l_ptr->next_out); diff --git a/net/tipc/ref.c b/net/tipc/ref.c index 6704a58c7851..c38744c96ed1 100644 --- a/net/tipc/ref.c +++ b/net/tipc/ref.c @@ -148,7 +148,7 @@ u32 tipc_ref_acquire(void *object, spinlock_t **lock) reference = (next_plus_upper & ~index_mask) + index; entry->data.reference = reference; entry->object = object; - if (lock != 0) + if (lock != NULL) *lock = &entry->lock; spin_unlock_bh(&entry->lock); } diff --git a/net/tipc/zone.c b/net/tipc/zone.c index 114e173f11a5..3506f8563441 100644 --- a/net/tipc/zone.c +++ b/net/tipc/zone.c @@ -82,7 +82,7 @@ void tipc_zone_attach_cluster(struct _zone *z_ptr, struct cluster *c_ptr) assert(c_ptr->addr); assert(c_num <= tipc_max_clusters); - assert(z_ptr->clusters[c_num] == 0); + assert(z_ptr->clusters[c_num] == NULL); z_ptr->clusters[c_num] = c_ptr; } -- cgit v1.2.2 From 3ab2273175bd59616b6e85c0f88b154e8bd97413 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 26 Feb 2008 17:42:56 -0800 Subject: bluetooth: delete timer in l2cap_conn_del() Delete a possibly armed timer before kfree'ing the connection object. Solves: http://lkml.org/lkml/2008/2/15/514 Reported-by:Quel Qun Signed-off-by: Thomas Gleixner Signed-off-by: David S. Miller --- net/bluetooth/l2cap.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index a8811c0a0cea..7c5459c8e8ef 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -417,6 +417,8 @@ static void l2cap_conn_del(struct hci_conn *hcon, int err) l2cap_sock_kill(sk); } + del_timer_sync(&conn->info_timer); + hcon->l2cap_data = NULL; kfree(conn); } -- cgit v1.2.2 From 3dbf8d56a2b7e0d738950daa16682e1e6dafb28b Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 26 Feb 2008 17:52:05 -0800 Subject: [MACVLAN]: Update Kconfig to refer to iproute Since the macvlan release I had at least 5 users asking how to configure it since the old userspace tool doesn't work with the version in the kernel. Add a pointer to the Kconfig help. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- drivers/net/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f337800076c0..a20e72f5ad28 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -90,6 +90,11 @@ config MACVLAN This allows one to create virtual interfaces that map packets to or from specific MAC addresses to a particular interface. + Macvlan devices can be added using the "ip" command from the + iproute2 package starting with the iproute2-2.6.23 release: + + "ip link add link [ address MAC ] [ NAME ] type macvlan" + To compile this driver as a module, choose M here: the module will be called macvlan. -- cgit v1.2.2 From f1243c2db6e3b8e5a602b1be2d256b582fc78ce4 Mon Sep 17 00:00:00 2001 From: Benjamin Thery Date: Tue, 26 Feb 2008 18:10:03 -0800 Subject: [IPV6]: Add missing initializations of the new nl_info.nl_net field Add some more missing initializations of the new nl_info.nl_net field in IPv6 stack. This field will be used when network namespaces are fully supported. Signed-off-by: Benjamin Thery Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 3 +++ net/ipv6/route.c | 2 ++ 2 files changed, 5 insertions(+) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index e40213db9e4c..101e0e70ba27 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1557,6 +1557,7 @@ addrconf_prefix_route(struct in6_addr *pfx, int plen, struct net_device *dev, .fc_expires = expires, .fc_dst_len = plen, .fc_flags = RTF_UP | flags, + .fc_nlinfo.nl_net = &init_net, }; ipv6_addr_copy(&cfg.fc_dst, pfx); @@ -1583,6 +1584,7 @@ static void addrconf_add_mroute(struct net_device *dev) .fc_ifindex = dev->ifindex, .fc_dst_len = 8, .fc_flags = RTF_UP, + .fc_nlinfo.nl_net = &init_net, }; ipv6_addr_set(&cfg.fc_dst, htonl(0xFF000000), 0, 0, 0); @@ -1599,6 +1601,7 @@ static void sit_route_add(struct net_device *dev) .fc_ifindex = dev->ifindex, .fc_dst_len = 96, .fc_flags = RTF_UP | RTF_NONEXTHOP, + .fc_nlinfo.nl_net = &init_net, }; /* prefix length - 96 bits "::d.d.d.d" */ diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 6e7b56ef4449..e8b241cb60bc 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1719,6 +1719,8 @@ static void rtmsg_to_fib6_config(struct in6_rtmsg *rtmsg, cfg->fc_src_len = rtmsg->rtmsg_src_len; cfg->fc_flags = rtmsg->rtmsg_flags; + cfg->fc_nlinfo.nl_net = &init_net; + ipv6_addr_copy(&cfg->fc_dst, &rtmsg->rtmsg_dst); ipv6_addr_copy(&cfg->fc_src, &rtmsg->rtmsg_src); ipv6_addr_copy(&cfg->fc_gateway, &rtmsg->rtmsg_gateway); -- cgit v1.2.2 From 148f97292e8fa2c35fcef60a7725cf1b073d6818 Mon Sep 17 00:00:00 2001 From: Bjorn Mork Date: Tue, 26 Feb 2008 18:17:53 -0800 Subject: [IPV4]: Reset scope when changing address This bug did bite at least one user, who did have to resort to rebooting the system after an "ifconfig eth0 127.0.0.1" typo. Deleting the address and adding a new is a less intrusive workaround. But I still beleive this is a bug that should be fixed. Some way or another. Another possibility would be to remove the scope mangling based on address. This will always be incomplete (are 127/8 the only address space with host scope requirements?) We set the scope to RT_SCOPE_HOST if an IPv4 interface is configured with a loopback address (127/8). The scope is never reset, and will remain set to RT_SCOPE_HOST after changing the address. This patch resets the scope if the address is changed again, to restore normal functionality. Signed-off-by: Bjorn Mork Signed-off-by: David S. Miller --- net/ipv4/devinet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index f282b26f63eb..87490f7bb0f7 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -752,6 +752,7 @@ int devinet_ioctl(unsigned int cmd, void __user *arg) inet_del_ifa(in_dev, ifap, 0); ifa->ifa_broadcast = 0; ifa->ifa_anycast = 0; + ifa->ifa_scope = 0; } ifa->ifa_address = ifa->ifa_local = sin->sin_addr.s_addr; -- cgit v1.2.2 From 78374676efae525094aee45c0aab4bcab95ea9d1 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 26 Feb 2008 18:25:53 -0800 Subject: CONNECTOR: make cn_already_initialized static It is used in connector.c only, so make it static. Signed-off-by: Li Zefan Signed-off-by: David S. Miller --- drivers/connector/connector.c | 2 +- include/linux/connector.h | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index fea2d3ed9cbd..85e2ba7fcfba 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -47,7 +47,7 @@ static LIST_HEAD(notify_list); static struct cn_dev cdev; -int cn_already_initialized = 0; +static int cn_already_initialized; /* * msg->seq and msg->ack are used to determine message genealogy. diff --git a/include/linux/connector.h b/include/linux/connector.h index da6dd957f908..96a89d3d6727 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -170,7 +170,5 @@ int cn_cb_equal(struct cb_id *, struct cb_id *); void cn_queue_wrapper(struct work_struct *work); -extern int cn_already_initialized; - #endif /* __KERNEL__ */ #endif /* __CONNECTOR_H */ -- cgit v1.2.2 From d9595a7b9c777d45a74774f1428c263a0a47f4c0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 26 Feb 2008 22:20:44 -0800 Subject: [AF_KEY]: Fix oops by converting to proc_net_*(). To make sure the procfs visibility occurs after the ->proc_fs ops are setup, use proc_net_fops_create() and proc_net_remove(). This also fixes an OOPS after module unload in that the name string for remove was wrong, so it wouldn't actually be removed. That bug was introduced by commit 61145aa1a12401ac71bcc450a58c773dd6e2bfb9 ("[KEY]: Clean up proc files creation a bit.") Signed-off-by: David S. Miller --- net/key/af_key.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/key/af_key.c b/net/key/af_key.c index 1c853927810a..8b5f486ac80f 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3807,17 +3807,16 @@ static int pfkey_init_proc(void) { struct proc_dir_entry *e; - e = create_proc_entry("pfkey", 0, init_net.proc_net); + e = proc_net_fops_create(&init_net, "pfkey", 0, &pfkey_proc_ops); if (e == NULL) return -ENOMEM; - e->proc_fops = &pfkey_proc_ops; return 0; } static void pfkey_exit_proc(void) { - remove_proc_entry("net/pfkey", NULL); + proc_net_remove(&init_net, "pfkey"); } #else static inline int pfkey_init_proc(void) -- cgit v1.2.2 From b37d428b24ad38034f56b614de05686ba151b614 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Tue, 26 Feb 2008 23:51:04 -0800 Subject: [INET]: Don't create tunnels with '%' in name. Four tunnel drivers (ip_gre, ipip, ip6_tunnel and sit) can receive a pre-defined name for a device from the userspace. Since these drivers call the register_netdevice() (rtnl_lock, is held), which does _not_ generate the device's name, this name may contain a '%' character. Not sure how bad is this to have a device with a '%' in its name, but all the other places either use the register_netdev(), which call the dev_alloc_name(), or explicitly call the dev_alloc_name() before registering, i.e. do not allow for such names. This had to be prior to the commit 34cc7b, but I forgot to number the patches and this one got lost, sorry. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/ipv4/ip_gre.c | 14 +++++++++----- net/ipv4/ipip.c | 14 +++++++++----- net/ipv6/ip6_tunnel.c | 15 +++++++++++---- net/ipv6/sit.c | 13 +++++++++---- 4 files changed, 38 insertions(+), 18 deletions(-) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 906cb1ada4c3..e7821ba7a9a0 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -266,20 +266,24 @@ static struct ip_tunnel * ipgre_tunnel_locate(struct ip_tunnel_parm *parms, int if (!dev) return NULL; + if (strchr(name, '%')) { + if (dev_alloc_name(dev, name) < 0) + goto failed_free; + } + dev->init = ipgre_tunnel_init; nt = netdev_priv(dev); nt->parms = *parms; - if (register_netdevice(dev) < 0) { - free_netdev(dev); - goto failed; - } + if (register_netdevice(dev) < 0) + goto failed_free; dev_hold(dev); ipgre_tunnel_link(nt); return nt; -failed: +failed_free: + free_netdev(dev); return NULL; } diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index e77e3b855834..dbaed69de06a 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -228,20 +228,24 @@ static struct ip_tunnel * ipip_tunnel_locate(struct ip_tunnel_parm *parms, int c if (dev == NULL) return NULL; + if (strchr(name, '%')) { + if (dev_alloc_name(dev, name) < 0) + goto failed_free; + } + nt = netdev_priv(dev); dev->init = ipip_tunnel_init; nt->parms = *parms; - if (register_netdevice(dev) < 0) { - free_netdev(dev); - goto failed; - } + if (register_netdevice(dev) < 0) + goto failed_free; dev_hold(dev); ipip_tunnel_link(nt); return nt; -failed: +failed_free: + free_netdev(dev); return NULL; } diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 2a124e9a1b2d..78f438880923 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -238,17 +238,24 @@ static struct ip6_tnl *ip6_tnl_create(struct ip6_tnl_parm *p) if (dev == NULL) goto failed; + if (strchr(name, '%')) { + if (dev_alloc_name(dev, name) < 0) + goto failed_free; + } + t = netdev_priv(dev); dev->init = ip6_tnl_dev_init; t->parms = *p; - if ((err = register_netdevice(dev)) < 0) { - free_netdev(dev); - goto failed; - } + if ((err = register_netdevice(dev)) < 0) + goto failed_free; + dev_hold(dev); ip6_tnl_link(t); return t; + +failed_free: + free_netdev(dev); failed: return NULL; } diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index dde7801abeff..1656c003b989 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -171,6 +171,11 @@ static struct ip_tunnel * ipip6_tunnel_locate(struct ip_tunnel_parm *parms, int if (dev == NULL) return NULL; + if (strchr(name, '%')) { + if (dev_alloc_name(dev, name) < 0) + goto failed_free; + } + nt = netdev_priv(dev); dev->init = ipip6_tunnel_init; nt->parms = *parms; @@ -178,16 +183,16 @@ static struct ip_tunnel * ipip6_tunnel_locate(struct ip_tunnel_parm *parms, int if (parms->i_flags & SIT_ISATAP) dev->priv_flags |= IFF_ISATAP; - if (register_netdevice(dev) < 0) { - free_netdev(dev); - goto failed; - } + if (register_netdevice(dev) < 0) + goto failed_free; dev_hold(dev); ipip6_tunnel_link(nt); return nt; +failed_free: + free_netdev(dev); failed: return NULL; } -- cgit v1.2.2 From 3bdfe7ec08b4256121a8894cd978e74fcf7031d7 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Wed, 27 Feb 2008 12:06:38 -0800 Subject: [IPV6] SYSCTL: Fix possible memory leakage in error path. In error path, we do need to free memory just allocated. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/sysctl_net_ipv6.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c index 408691b777c2..d6d3e68086f8 100644 --- a/net/ipv6/sysctl_net_ipv6.c +++ b/net/ipv6/sysctl_net_ipv6.c @@ -101,9 +101,6 @@ static int ipv6_sysctl_net_init(struct net *net) net->ipv6.sysctl.table = register_net_sysctl_table(net, net_ipv6_ctl_path, ipv6_table); - if (!net->ipv6.sysctl.table) - return -ENOMEM; - if (!net->ipv6.sysctl.table) goto out_ipv6_icmp_table; -- cgit v1.2.2 From 4e29e9ec7e0707d3925f5dcc29af0d3f04e49833 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 27 Feb 2008 12:07:47 -0800 Subject: [NETFILTER]: nf_conntrack: fix smp_processor_id() in preemptible code warning Since we're using RCU for the conntrack hash now, we need to avoid getting preempted or interrupted by BHs while changing the stats. Fixes warning reported by Tilman Schmidt when using preemptible RCU: [ 48.180297] BUG: using smp_processor_id() in preemptible [00000000] code: ntpdate/3562 [ 48.180297] caller is __nf_conntrack_find+0x9b/0xeb [nf_conntrack] [ 48.180297] Pid: 3562, comm: ntpdate Not tainted 2.6.25-rc2-mm1-testing #1 [ 48.180297] [] debug_smp_processor_id+0x99/0xb0 [ 48.180297] [] __nf_conntrack_find+0x9b/0xeb [nf_conntrack] Tested-by: Tilman Schmidt Tested-by: Christian Casteyde [Bugzilla #10097] Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_core.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 327e847d2702..b77eb56a87e3 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -256,13 +256,19 @@ __nf_conntrack_find(const struct nf_conntrack_tuple *tuple) struct hlist_node *n; unsigned int hash = hash_conntrack(tuple); + /* Disable BHs the entire time since we normally need to disable them + * at least once for the stats anyway. + */ + local_bh_disable(); hlist_for_each_entry_rcu(h, n, &nf_conntrack_hash[hash], hnode) { if (nf_ct_tuple_equal(tuple, &h->tuple)) { NF_CT_STAT_INC(found); + local_bh_enable(); return h; } NF_CT_STAT_INC(searched); } + local_bh_enable(); return NULL; } @@ -400,17 +406,20 @@ nf_conntrack_tuple_taken(const struct nf_conntrack_tuple *tuple, struct hlist_node *n; unsigned int hash = hash_conntrack(tuple); - rcu_read_lock(); + /* Disable BHs the entire time since we need to disable them at + * least once for the stats anyway. + */ + rcu_read_lock_bh(); hlist_for_each_entry_rcu(h, n, &nf_conntrack_hash[hash], hnode) { if (nf_ct_tuplehash_to_ctrack(h) != ignored_conntrack && nf_ct_tuple_equal(tuple, &h->tuple)) { NF_CT_STAT_INC(found); - rcu_read_unlock(); + rcu_read_unlock_bh(); return 1; } NF_CT_STAT_INC(searched); } - rcu_read_unlock(); + rcu_read_unlock_bh(); return 0; } -- cgit v1.2.2 From d61f89e9417e68caf9ca801606694c1c960ad179 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Wed, 27 Feb 2008 12:09:05 -0800 Subject: [NETFILTER]: xt_conntrack: fix missing boolean clamping Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_conntrack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c index 85330856a29c..dd192ac74b4a 100644 --- a/net/netfilter/xt_conntrack.c +++ b/net/netfilter/xt_conntrack.c @@ -231,7 +231,7 @@ conntrack_mt(const struct sk_buff *skb, const struct net_device *in, if (test_bit(IPS_DST_NAT_BIT, &ct->status)) statebit |= XT_CONNTRACK_STATE_DNAT; } - if ((info->state_mask & statebit) ^ + if (!!(info->state_mask & statebit) ^ !(info->invert_flags & XT_CONNTRACK_STATE)) return false; } -- cgit v1.2.2 From 6556874dc3770aefae89907b3cf9be8e23d66137 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Wed, 27 Feb 2008 12:20:41 -0800 Subject: [NETFILTER]: xt_conntrack: fix IPv4 address comparison Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_conntrack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c index dd192ac74b4a..0c50b2894055 100644 --- a/net/netfilter/xt_conntrack.c +++ b/net/netfilter/xt_conntrack.c @@ -122,7 +122,7 @@ conntrack_addrcmp(const union nf_inet_addr *kaddr, const union nf_inet_addr *umask, unsigned int l3proto) { if (l3proto == AF_INET) - return (kaddr->ip & umask->ip) == uaddr->ip; + return ((kaddr->ip ^ uaddr->ip) & umask->ip) == 0; else if (l3proto == AF_INET6) return ipv6_masked_addr_cmp(&kaddr->in6, &umask->in6, &uaddr->in6) == 0; -- cgit v1.2.2 From fbabbed8284d1526ed01754ecd4fabdb941a1ff2 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 27 Feb 2008 12:21:18 -0800 Subject: [NETFILTER]: Fix NF_QUEUE_NR() parenthesis Properly add parens around the macro argument. This is not needed by the kernel but the macro is exported to userspace, so it shouldn't make any assumptions. Also use NF_VERDICT_BITS instead of NF_VERDICT_QBTIS for the left-shift since thats whats logically correct. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index b74b615492e8..f0680c2bee73 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -31,7 +31,7 @@ #define NF_VERDICT_QMASK 0xffff0000 #define NF_VERDICT_QBITS 16 -#define NF_QUEUE_NR(x) (((x << NF_VERDICT_QBITS) & NF_VERDICT_QMASK) | NF_QUEUE) +#define NF_QUEUE_NR(x) ((((x) << NF_VERDICT_BITS) & NF_VERDICT_QMASK) | NF_QUEUE) /* only for userspace compatibility */ #ifndef __KERNEL__ -- cgit v1.2.2 From b90a137d30a6322d76023d879d40fc31f3edf0a6 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 14 Feb 2008 10:18:20 -0500 Subject: [SCTP]: Correctly set the length of sctp_assoc_change notification sctp_assoc_change notification may contain the data from a received ABORT chunk. Set the length correctly to account for that. Signed-off-by: Vlad Yasevich --- net/sctp/ulpevent.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c index e27b11f18b7f..b43f1f110f87 100644 --- a/net/sctp/ulpevent.c +++ b/net/sctp/ulpevent.c @@ -206,7 +206,7 @@ struct sctp_ulpevent *sctp_ulpevent_make_assoc_change( * This field is the total length of the notification data, including * the notification header. */ - sac->sac_length = sizeof(struct sctp_assoc_change); + sac->sac_length = skb->len; /* Socket Extensions for SCTP * 5.3.1.1 SCTP_ASSOC_CHANGE -- cgit v1.2.2 From 5b0acc64a3750f8f017b973f1059bb25b791c2a3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 20 Feb 2008 11:47:45 +0100 Subject: rndis_wlan: fix sparse warnings It is obviously wrong to use an enum in a little endian struct, and those other enums should be declared differently. Signed-off-by: Johannes Berg Acked-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/rndis_wlan.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 8ce2ddf8024f..d9460aed1f22 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -228,9 +228,9 @@ struct NDIS_WLAN_BSSID_EX { struct NDIS_802_11_SSID Ssid; __le32 Privacy; __le32 Rssi; - enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse; + __le32 NetworkTypeInUse; struct NDIS_802_11_CONFIGURATION Configuration; - enum NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode; + __le32 InfrastructureMode; u8 SupportedRates[NDIS_802_11_LENGTH_RATES_EX]; __le32 IELength; u8 IEs[0]; @@ -279,11 +279,11 @@ struct RNDIS_CONFIG_PARAMETER_INFOBUFFER { } __attribute__((packed)); /* these have to match what is in wpa_supplicant */ -enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP } wpa_alg; -enum { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, CIPHER_WEP104 } - wpa_cipher; -enum { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE, KEY_MGMT_802_1X_NO_WPA, - KEY_MGMT_WPA_NONE } wpa_key_mgmt; +enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP }; +enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, + CIPHER_WEP104 }; +enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE, + KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE }; /* * private data -- cgit v1.2.2 From 4b74850dc3fb8a0941dde0f1bf7686803d1250cd Mon Sep 17 00:00:00 2001 From: Masakazu Mokuno Date: Fri, 22 Feb 2008 16:45:26 +0900 Subject: PS3: gelic: Link the wireless net_device structure to the corresponding device structure Link the net_device structure of the wireless part to the corresponding device structure. Without this, the sysfs node for this net_device would not have 'device' link. Signed-off-by: Masakazu Mokuno Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/ps3_gelic_wireless.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index 750d2a99cb4f..daf5abab9534 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -2690,6 +2690,7 @@ int gelic_wl_driver_probe(struct gelic_card *card) return -ENOMEM; /* setup net_device structure */ + SET_NETDEV_DEV(netdev, &card->dev->core); gelic_wl_setup_netdev_ops(netdev); /* setup some of net_device and register it */ -- cgit v1.2.2 From 8bfb04756a698e38825656eab3bc339a321551b3 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Sat, 23 Feb 2008 21:46:31 +0100 Subject: gelic wireless driver needs WIRELESS_EXT support | CC drivers/net/ps3_gelic_wireless.o | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c: In function 'gelic_wl_setup_netdev_ops': | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2660: error: 'struct net_device' has no member named 'wireless_data' | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2661: error: 'struct net_device' has no member named 'wireless_handlers' | make[3]: *** [drivers/net/ps3_gelic_wireless.o] Error 1 | make[2]: *** [drivers/net] Error 2 | make[1]: *** [drivers] Error 2 | make[1]: *** Waiting for unfinished jobs.... | make: *** [sub-make] Error 2 Signed-off-by: Sebastian Siewior Acked-by: Masakazu Mokuno Signed-off-by: John W. Linville --- drivers/net/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a20e72f5ad28..a0f0e605d630 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2368,6 +2368,7 @@ config GELIC_NET config GELIC_WIRELESS bool "PS3 Wireless support" depends on GELIC_NET + select WIRELESS_EXT help This option adds the support for the wireless feature of PS3. If you have the wireless-less model of PS3 or have no plan to -- cgit v1.2.2 From b290d433618aa7122f6e6c4a62ddc79412a48d4d Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 25 Feb 2008 23:15:01 +0100 Subject: rt2x00: Fix antenna diversity Fix 2 issues in antenna diversity selection. 1) the following statement will always return true. if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5) It is cleaner to check if the absolute value is smaller then 5. 2) Only enable software diversity when default antenna setup indicates support for it. Don't select it when the hardware does not indicate support for it... Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index c4be2ac4d7a4..00f5f0d49e1d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -293,7 +293,7 @@ static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev) * sample the rssi from the other antenna to make a valid * comparison between the 2 antennas. */ - if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5) + if (abs(rssi_curr - rssi_old) < 5) return; rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE; @@ -319,10 +319,10 @@ static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY; if (rt2x00dev->hw->conf.antenna_sel_rx == 0 && - rt2x00dev->default_ant.rx != ANTENNA_SW_DIVERSITY) + rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY; if (rt2x00dev->hw->conf.antenna_sel_tx == 0 && - rt2x00dev->default_ant.tx != ANTENNA_SW_DIVERSITY) + rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY; if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) && -- cgit v1.2.2 From 61667d8d5bf3c3ee09474069eaf4b93a4755ff8b Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 25 Feb 2008 23:15:05 +0100 Subject: rt2x00: Add link tuner safe RX toggle states This adds 2 new states which both are used to toggle the RX. These new states are required for usage inside the link tuner thread, because the normal RX toggling will stop the link tuner thread. While it is possible that the link tuner thread itself is the caller of the RX toggle (when using software antenna diversity). Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2400pci.c | 6 +++++- drivers/net/wireless/rt2x00/rt2500pci.c | 6 +++++- drivers/net/wireless/rt2x00/rt2500usb.c | 6 +++++- drivers/net/wireless/rt2x00/rt2x00config.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00reg.h | 2 ++ drivers/net/wireless/rt2x00/rt61pci.c | 6 +++++- drivers/net/wireless/rt2x00/rt73usb.c | 6 +++++- 7 files changed, 29 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index d6cba138c7ab..c69f85ed7669 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -960,8 +960,12 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, rt2400pci_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt2400pci_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index e874fdcae204..91e87b53374f 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1112,8 +1112,12 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, rt2500pci_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt2500pci_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 4ca9730e5e92..638c3d243108 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1001,8 +1001,12 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, rt2500usb_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt2500usb_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 72cfe00c1ed7..0d57d7f67837 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -102,7 +102,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, * else the changes will be ignored by the device. */ if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); + rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK); /* * Write new antenna setup to device and reset the link tuner. @@ -116,7 +116,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, rt2x00dev->link.ant.active.tx = libconf.ant.tx; if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK); } void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 838421216da0..b1915dc7dda1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -85,6 +85,8 @@ enum dev_state { STATE_RADIO_OFF, STATE_RADIO_RX_ON, STATE_RADIO_RX_OFF, + STATE_RADIO_RX_ON_LINK, + STATE_RADIO_RX_OFF_LINK, STATE_RADIO_IRQ_ON, STATE_RADIO_IRQ_OFF, }; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index b31f0c26c32b..e808db98f2f5 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1482,8 +1482,12 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, rt61pci_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt61pci_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 4d576ab3e7f9..4fac2d414d84 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1208,8 +1208,12 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, rt73usb_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt73usb_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: -- cgit v1.2.2 From 05253c93feb40901d80a0d6f239a0bc78860c679 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 25 Feb 2008 23:15:08 +0100 Subject: rt2x00: Don't switch to antenna with low rssi When rssi_a > rssi_b is true and the current antenna was already antenna A, then rt2x00 incorrectly jumped to antenna B. Also don't configure the antenna when there has been no change in the antenna setup. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00config.c | 4 ++++ drivers/net/wireless/rt2x00/rt2x00dev.c | 18 +++++------------- 2 files changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 0d57d7f67837..07adc576db49 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -97,6 +97,10 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, libconf.ant.rx = rx; libconf.ant.tx = tx; + if (rx == rt2x00dev->link.ant.active.rx && + tx == rt2x00dev->link.ant.active.tx) + return; + /* * Antenna setup changes require the RX to be disabled, * else the changes will be ignored by the device. diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 00f5f0d49e1d..7294c75272d0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -260,19 +260,11 @@ static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev) if (sample_a == sample_b) return; - if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) { - if (sample_a > sample_b && rx == ANTENNA_B) - rx = ANTENNA_A; - else if (rx == ANTENNA_A) - rx = ANTENNA_B; - } + if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) + rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; - if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) { - if (sample_a > sample_b && tx == ANTENNA_B) - tx = ANTENNA_A; - else if (tx == ANTENNA_A) - tx = ANTENNA_B; - } + if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) + tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; rt2x00lib_config_antenna(rt2x00dev, rx, tx); } @@ -327,7 +319,7 @@ static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev) if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) && !(rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)) { - rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE; + rt2x00dev->link.ant.flags = 0; return; } -- cgit v1.2.2 From 53b3f8e47a38f39836da1c9f9d2ea9a9c164c8f4 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 25 Feb 2008 23:15:13 +0100 Subject: rt2x00: Fix rt2x00lib_reset_link_tuner() rt2x00lib_reset_link_tuner() can be called from within the link tuner itself. This means that it should _not_ call rt2x00lib_stop_link_tuner() since that will cause the thread to hang. Reorder the things that should be done during a link tuner reset and during a link tuner start. Also make antenna tuning the last step of the link tuner since it could possibly reset some statistical information which we need for average calculation. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 49 ++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 7294c75272d0..0d51f478bcdf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -61,11 +61,33 @@ EXPORT_SYMBOL_GPL(rt2x00lib_get_ring); /* * Link tuning handlers */ -static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) +void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) { + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + /* + * Reset link information. + * Both the currently active vgc level as well as + * the link tuner counter should be reset. Resetting + * the counter is important for devices where the + * device should only perform link tuning during the + * first minute after being enabled. + */ rt2x00dev->link.count = 0; rt2x00dev->link.vgc_level = 0; + /* + * Reset the link tuner. + */ + rt2x00dev->ops->lib->reset_tuner(rt2x00dev); +} + +static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + /* + * Clear all (possibly) pre-existing quality statistics. + */ memset(&rt2x00dev->link.qual, 0, sizeof(rt2x00dev->link.qual)); /* @@ -79,10 +101,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.qual.rx_percentage = 50; rt2x00dev->link.qual.tx_percentage = 50; - /* - * Reset the link tuner. - */ - rt2x00dev->ops->lib->reset_tuner(rt2x00dev); + rt2x00lib_reset_link_tuner(rt2x00dev); queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work, LINK_TUNE_INTERVAL); @@ -93,15 +112,6 @@ static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev) cancel_delayed_work_sync(&rt2x00dev->link.work); } -void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - rt2x00lib_stop_link_tuner(rt2x00dev); - rt2x00lib_start_link_tuner(rt2x00dev); -} - /* * Ring initialization */ @@ -432,17 +442,18 @@ static void rt2x00lib_link_tuner(struct work_struct *work) if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags)) rt2x00dev->ops->lib->link_tuner(rt2x00dev); - /* - * Evaluate antenna setup. - */ - rt2x00lib_evaluate_antenna(rt2x00dev); - /* * Precalculate a portion of the link signal which is * in based on the tx/rx success/failure counters. */ rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual); + /* + * Evaluate antenna setup, make this the last step since this could + * possibly reset some statistics. + */ + rt2x00lib_evaluate_antenna(rt2x00dev); + /* * Increase tuner counter, and reschedule the next link tuner run. */ -- cgit v1.2.2 From 03147dfc8a3756439f0cc54aa181f30067f1b21b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Feb 2008 00:39:28 +0100 Subject: mac80211: fix kmalloc vs. net_ratelimit The "goto end;" part definitely must not be rate limited. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ieee80211_sta.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c index 2019b4f0528d..9aeed5320228 100644 --- a/net/mac80211/ieee80211_sta.c +++ b/net/mac80211/ieee80211_sta.c @@ -1116,9 +1116,10 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev, /* prepare reordering buffer */ tid_agg_rx->reorder_buf = kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC); - if ((!tid_agg_rx->reorder_buf) && net_ratelimit()) { - printk(KERN_ERR "can not allocate reordering buffer " - "to tid %d\n", tid); + if (!tid_agg_rx->reorder_buf) { + if (net_ratelimit()) + printk(KERN_ERR "can not allocate reordering buffer " + "to tid %d\n", tid); goto end; } memset(tid_agg_rx->reorder_buf, 0, -- cgit v1.2.2 From 4b7524a42e14a7f86fa12611f3419650e99e2526 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 26 Feb 2008 15:26:56 +0100 Subject: libertas: Remove unused exports The libertas driver exports a number of symbols with no in-tree users; remove these unused exports. lbs_reset_device() is completely unused, with no callers at all, so remove the function completely. A couple of these unused exported symbols are static, which causes the following build error on ia64 with gcc 4.2.3: drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict Signed-off-by: Roland Dreier Acked-by: Holger Schurig Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cmd.c | 2 -- drivers/net/wireless/libertas/decl.h | 1 - drivers/net/wireless/libertas/main.c | 17 ----------------- 3 files changed, 20 deletions(-) diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index eab020338fde..b3c1acbcc655 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1040,7 +1040,6 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action, lbs_deb_leave(LBS_DEB_CMD); return ret; } -EXPORT_SYMBOL_GPL(lbs_mesh_access); int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan) { @@ -1576,7 +1575,6 @@ done: lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret); return ret; } -EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command); /** * @brief This function allocates the command buffer and link diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h index aaacd9bd6bd2..4e22341b4f3d 100644 --- a/drivers/net/wireless/libertas/decl.h +++ b/drivers/net/wireless/libertas/decl.h @@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev); int lbs_remove_card(struct lbs_private *priv); int lbs_start_card(struct lbs_private *priv); int lbs_stop_card(struct lbs_private *priv); -int lbs_reset_device(struct lbs_private *priv); void lbs_host_to_card_done(struct lbs_private *priv); int lbs_update_channel(struct lbs_private *priv); diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 84fb49ca0fae..4d4e2f3b66ac 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -1351,8 +1351,6 @@ done: lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret); return ret; } -EXPORT_SYMBOL_GPL(lbs_add_mesh); - static void lbs_remove_mesh(struct lbs_private *priv) { @@ -1372,7 +1370,6 @@ static void lbs_remove_mesh(struct lbs_private *priv) free_netdev(mesh_dev); lbs_deb_leave(LBS_DEB_MESH); } -EXPORT_SYMBOL_GPL(lbs_remove_mesh); /** * @brief This function finds the CFP in @@ -1458,20 +1455,6 @@ void lbs_interrupt(struct lbs_private *priv) } EXPORT_SYMBOL_GPL(lbs_interrupt); -int lbs_reset_device(struct lbs_private *priv) -{ - int ret; - - lbs_deb_enter(LBS_DEB_MAIN); - ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET, - CMD_ACT_HALT, 0, 0, NULL); - msleep_interruptible(10); - - lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); - return ret; -} -EXPORT_SYMBOL_GPL(lbs_reset_device); - static int __init lbs_init_module(void) { lbs_deb_enter(LBS_DEB_MAIN); -- cgit v1.2.2 From c7084535c9d2b8bcfc19f1ad9452eabde742ae22 Mon Sep 17 00:00:00 2001 From: Alexey Zaytsev Date: Sat, 23 Feb 2008 12:59:26 +0300 Subject: Use a separate config option for the b43 pci to ssb bridge. The bridge code was unnecessary enabled by the b44 driver, but it prevents the bcm43xx driver from being loaded, as the bridge claims the same pci ids. Now we enable the birdge only if the b43{legacy} drivers are selected. Signed-off-by: Alexey Zaytsev Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/b43/Kconfig | 1 + drivers/net/wireless/b43legacy/Kconfig | 1 + drivers/ssb/Kconfig | 5 +++++ drivers/ssb/Makefile | 2 +- drivers/ssb/ssb_private.h | 4 ++-- 5 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 1a2141dabdc7..8bc4bc4c330e 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -32,6 +32,7 @@ config B43_PCI_AUTOSELECT bool depends on B43 && SSB_PCIHOST_POSSIBLE select SSB_PCIHOST + select SSB_B43_PCI_BRIDGE default y # Auto-select SSB PCICORE driver, if possible diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig index 6745579ba96d..13c65faf0247 100644 --- a/drivers/net/wireless/b43legacy/Kconfig +++ b/drivers/net/wireless/b43legacy/Kconfig @@ -25,6 +25,7 @@ config B43LEGACY_PCI_AUTOSELECT bool depends on B43LEGACY && SSB_PCIHOST_POSSIBLE select SSB_PCIHOST + select SSB_B43_PCI_BRIDGE default y # Auto-select SSB PCICORE driver, if possible diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index 78fd33125e02..adea792fb675 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -35,6 +35,11 @@ config SSB_PCIHOST If unsure, say Y +config SSB_B43_PCI_BRIDGE + bool + depends on SSB_PCIHOST + default n + config SSB_PCMCIAHOST_POSSIBLE bool depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile index e235144add7c..de94c2eb7a37 100644 --- a/drivers/ssb/Makefile +++ b/drivers/ssb/Makefile @@ -14,6 +14,6 @@ ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o # b43 pci-ssb-bridge driver # Not strictly a part of SSB, but kept here for convenience -ssb-$(CONFIG_SSB_PCIHOST) += b43_pci_bridge.o +ssb-$(CONFIG_SSB_B43_PCI_BRIDGE) += b43_pci_bridge.o obj-$(CONFIG_SSB) += ssb.o diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h index a789364264a6..21eca2b5118b 100644 --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h @@ -120,10 +120,10 @@ extern int ssb_devices_thaw(struct ssb_bus *bus); extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); /* b43_pci_bridge.c */ -#ifdef CONFIG_SSB_PCIHOST +#ifdef CONFIG_SSB_B43_PCI_BRIDGE extern int __init b43_pci_ssb_bridge_init(void); extern void __exit b43_pci_ssb_bridge_exit(void); -#else /* CONFIG_SSB_PCIHOST */ +#else /* CONFIG_SSB_B43_PCI_BRIDGR */ static inline int b43_pci_ssb_bridge_init(void) { return 0; -- cgit v1.2.2 From f9d8f88952c263a4eeaaa0fc6ff726d2315b6a57 Mon Sep 17 00:00:00 2001 From: Alexey Zaytsev Date: Sat, 23 Feb 2008 13:33:07 +0300 Subject: Don't build bcm43xx if SSB is static and b43 PCI-SSB bridge is enabled. This may happen e.g. when the ssb is statically enables by the b44 driver, and the b43 pci-ssb bridge is enbled by the b43/b43legacy drivers, or the b43/b43legacy drivers are built statically. Signed-off-by: Alexey Zaytsev Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/bcm43xx/Kconfig b/drivers/net/wireless/bcm43xx/Kconfig index 0159701e8456..afb8f4305c24 100644 --- a/drivers/net/wireless/bcm43xx/Kconfig +++ b/drivers/net/wireless/bcm43xx/Kconfig @@ -1,6 +1,6 @@ config BCM43XX tristate "Broadcom BCM43xx wireless support (DEPRECATED)" - depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && EXPERIMENTAL + depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && (!SSB_B43_PCI_BRIDGE || SSB != y) && EXPERIMENTAL select WIRELESS_EXT select FW_LOADER select HW_RANDOM -- cgit v1.2.2 From 2d8d4fdf78488f3362dccfd2a6bfdb4bc65c0858 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Thu, 28 Feb 2008 15:11:26 +0100 Subject: SSB PCI core driver: use new SPROM data structure Switch the SSB PCI core driver to the new SPROM data structure now that the old one has been removed. Signed-off-by: Aurelien Jarno Acked-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 6d99a9880055..07ab48d9ceab 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -393,7 +393,7 @@ static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) chipid_top != 0x5300) return 0; - if (bus->sprom.r1.boardflags_lo & SSB_PCICORE_BFL_NOPCI) + if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) return 0; /* The 200-pin BCM4712 package does not bond out PCI. Even when -- cgit v1.2.2 From 21e43188f272c7fd9efc84b8244c0b1dfccaa105 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 28 Feb 2008 11:23:17 -0800 Subject: [IPCOMP]: Disable BH on output when using shared tfm Because we use shared tfm objects in order to conserve memory, (each tfm requires 128K of vmalloc memory), BH needs to be turned off on output as that can occur in process context. Previously this was done implicitly by the xfrm output code. That was lost when it became lockless. So we need to add the BH disabling to IPComp directly. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/ipcomp.c | 5 ++++- net/ipv6/ipcomp6.c | 2 ++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c index ae1f45fc23b9..58b60b2fb011 100644 --- a/net/ipv4/ipcomp.c +++ b/net/ipv4/ipcomp.c @@ -108,8 +108,11 @@ static int ipcomp_compress(struct xfrm_state *x, struct sk_buff *skb) const int cpu = get_cpu(); u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu); struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu); - int err = crypto_comp_compress(tfm, start, plen, scratch, &dlen); + int err; + local_bh_disable(); + err = crypto_comp_compress(tfm, start, plen, scratch, &dlen); + local_bh_enable(); if (err) goto out; diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c index b90039593a7f..e3dcfa2f436b 100644 --- a/net/ipv6/ipcomp6.c +++ b/net/ipv6/ipcomp6.c @@ -146,7 +146,9 @@ static int ipcomp6_output(struct xfrm_state *x, struct sk_buff *skb) scratch = *per_cpu_ptr(ipcomp6_scratches, cpu); tfm = *per_cpu_ptr(ipcd->tfms, cpu); + local_bh_disable(); err = crypto_comp_compress(tfm, start, plen, scratch, &dlen); + local_bh_enable(); if (err || (dlen + sizeof(*ipch)) >= plen) { put_cpu(); goto out_ok; -- cgit v1.2.2 From c14423fe585a5937db6e2eece4b79486521103be Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:49:42 -0800 Subject: [BNX2X]: Spelling fixes Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 119 ++++++++++++++++++++++++---------------------------- drivers/net/bnx2x.h | 2 +- 2 files changed, 56 insertions(+), 65 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index afc7f34b1dcf..7b2d7898f06d 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -10,13 +10,13 @@ * Based on code from Michael Chan's bnx2 driver * UDP CSUM errata workaround by Arik Gendelman * Slowpath rework by Vladislav Zolotarov - * Statistics and Link managment by Yitchak Gertner + * Statistics and Link management by Yitchak Gertner * */ /* define this to make the driver freeze on error * to allow getting debug info - * (you will need to reboot afterwords) + * (you will need to reboot afterwards) */ /*#define BNX2X_STOP_ON_ERROR*/ @@ -71,7 +71,7 @@ #define TX_TIMEOUT (5*HZ) static char version[] __devinitdata = - "Broadcom NetXtreme II 577xx 10Gigabit Ethernet Driver " + "Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver " DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; MODULE_AUTHOR("Eliezer Tamir "); @@ -94,8 +94,8 @@ module_param(debug, int, 0); MODULE_PARM_DESC(use_inta, "use INT#A instead of MSI-X"); MODULE_PARM_DESC(poll, "use polling (for debug)"); MODULE_PARM_DESC(onefunc, "enable only first function"); -MODULE_PARM_DESC(nomcp, "ignore managment CPU (Implies onefunc)"); -MODULE_PARM_DESC(debug, "defualt debug msglevel"); +MODULE_PARM_DESC(nomcp, "ignore management CPU (Implies onefunc)"); +MODULE_PARM_DESC(debug, "default debug msglevel"); #ifdef BNX2X_MULTI module_param(use_multi, int, 0); @@ -341,6 +341,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp) } return rc; } + static void bnx2x_fw_dump(struct bnx2x *bp) { u32 mark, offset; @@ -491,7 +492,7 @@ static void bnx2x_disable_int_sync(struct bnx2x *bp) int i; atomic_inc(&bp->intr_sem); - /* prevent the HW from sending interrupts*/ + /* prevent the HW from sending interrupts */ bnx2x_disable_int(bp); /* make sure all ISRs are done */ @@ -775,6 +776,7 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp, mb(); /* force bnx2x_wait_ramrod to see the change */ return; } + switch (command | bp->state) { case (RAMROD_CMD_ID_ETH_PORT_SETUP | BNX2X_STATE_OPENING_WAIT4_PORT): DP(NETIF_MSG_IFUP, "got setup ramrod\n"); @@ -1471,7 +1473,7 @@ static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val) } /* - * link managment + * link management */ static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status) @@ -1482,7 +1484,7 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status) bp->flow_ctrl = 0; - /* reolve from gp_status in case of AN complete and not sgmii */ + /* resolve from gp_status in case of AN complete and not sgmii */ if ((bp->req_autoneg & AUTONEG_FLOW_CTRL) && (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) && (!(bp->phy_flags & PHY_SGMII_FLAG)) && @@ -1680,7 +1682,7 @@ static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g) int port = bp->port; /* first reset all status - * we asume only one line will be change at a time */ + * we assume only one line will be change at a time */ bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, (NIG_XGXS0_LINK_STATUS | NIG_SERDES0_LINK_STATUS | @@ -1819,7 +1821,7 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb) u32 wb_write[2]; u32 val; - DP(NETIF_MSG_LINK, "enableing BigMAC\n"); + DP(NETIF_MSG_LINK, "enabling BigMAC\n"); /* reset and unreset the BigMac */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); @@ -1940,7 +1942,7 @@ static void bnx2x_emac_enable(struct bnx2x *bp) u32 val; int timeout; - DP(NETIF_MSG_LINK, "enableing EMAC\n"); + DP(NETIF_MSG_LINK, "enabling EMAC\n"); /* reset and unreset the emac core */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); @@ -2033,7 +2035,7 @@ static void bnx2x_emac_enable(struct bnx2x *bp) EMAC_TX_MODE_EXT_PAUSE_EN); } - /* KEEP_VLAN_TAG, promiscous */ + /* KEEP_VLAN_TAG, promiscuous */ val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE); val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS; EMAC_WR(EMAC_REG_EMAC_RX_MODE, val); @@ -2161,7 +2163,6 @@ static void bnx2x_pbf_update(struct bnx2x *bp) u32 count = 1000; u32 pause = 0; - /* disable port */ REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1); @@ -2803,7 +2804,7 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled extenal phy int\n"); + DP(NETIF_MSG_LINK, "enabled external phy int\n"); bp->phy_addr = ext_phy_type; bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, @@ -2824,7 +2825,7 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled extenal phy int\n"); + DP(NETIF_MSG_LINK, "enabled external phy int\n"); bp->phy_addr = ext_phy_type; bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, @@ -2857,7 +2858,7 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled extenal phy int\n"); + DP(NETIF_MSG_LINK, "enabled external phy int\n"); break; default: @@ -2994,13 +2995,13 @@ static void bnx2x_link_initialize(struct bnx2x *bp) /* AN enabled */ bnx2x_set_brcm_cl37_advertisment(bp); - /* program duplex & pause advertisment (for aneg) */ + /* program duplex & pause advertisement (for aneg) */ bnx2x_set_ieee_aneg_advertisment(bp); /* enable autoneg */ bnx2x_set_autoneg(bp); - /* enalbe and restart AN */ + /* enable and restart AN */ bnx2x_restart_autoneg(bp); } @@ -3158,7 +3159,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, int port = bp->port; DP(NETIF_MSG_TIMER, - "spe (%x:%x) command %x hw_cid %x data (%x:%x) left %x\n", + "spe (%x:%x) command %d hw_cid %x data (%x:%x) left %x\n", (u32)U64_HI(bp->spq_mapping), (u32)(U64_LO(bp->spq_mapping) + (void *)bp->spq_prod_bd - (void *)bp->spq), command, HW_CID(bp, cid), data_hi, data_lo, bp->spq_left); @@ -3464,7 +3465,7 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) HW_PRTY_ASSERT_SET_1) || (attn.sig[2] & group_mask.sig[2] & HW_PRTY_ASSERT_SET_2)) - BNX2X_ERR("FATAL HW block parity atention\n"); + BNX2X_ERR("FATAL HW block parity attention\n"); } } @@ -3906,7 +3907,7 @@ static void bnx2x_stop_stats(struct bnx2x *bp) while (bp->stats_state != STATS_STATE_DISABLE) { if (!timeout) { - BNX2X_ERR("timeout wating for stats stop\n"); + BNX2X_ERR("timeout waiting for stats stop\n"); break; } timeout--; @@ -4626,7 +4627,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp) fp->rx_bd_prod = fp->rx_comp_prod = ring_prod; fp->rx_pkt = fp->rx_calls = 0; - /* Warning! this will genrate an interrupt (to the TSTORM) */ + /* Warning! this will generate an interrupt (to the TSTORM) */ /* must only be done when chip is initialized */ REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_RCQ_PROD_OFFSET(port, j), ring_prod); @@ -4850,7 +4851,7 @@ static void bnx2x_init_internal(struct bnx2x *bp) /* DP(NETIF_MSG_IFUP, "tstorm_config: 0x%08x\n", (*(u32 *)&tstorm_config)); */ - bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx untill link is up */ + bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */ bnx2x_set_storm_rx_mode(bp); for_each_queue(bp, i) @@ -5359,7 +5360,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) REG_RD(bp, USEM_REG_PASSIVE_BUFFER + 8); #endif bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END); - /* softrest pulse */ + /* soft reset pulse */ REG_WR(bp, QM_REG_SOFT_RESET, 1); REG_WR(bp, QM_REG_SOFT_RESET, 0); @@ -5413,7 +5414,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) REG_WR(bp, SRC_REG_SOFT_RST, 1); for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) { REG_WR(bp, i, 0xc0cac01a); - /* TODO: repleace with something meaningfull */ + /* TODO: replace with something meaningful */ } /* SRCH COMMON comes here */ REG_WR(bp, SRC_REG_SOFT_RST, 0); @@ -5647,7 +5648,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) bnx2x_link_reset(bp); - /* Reset pciex errors for debug */ + /* Reset PCIE errors for debug */ REG_WR(bp, 0x2114, 0xffffffff); REG_WR(bp, 0x2120, 0xffffffff); REG_WR(bp, 0x2814, 0xffffffff); @@ -5681,8 +5682,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) return 0; } - -/* send the MCP a request, block untill there is a reply */ +/* send the MCP a request, block until there is a reply */ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command) { u32 rc = 0; @@ -5869,7 +5869,7 @@ static int bnx2x_alloc_mem(struct bnx2x *bp) for (i = 0; i < 16*1024; i += 64) * (u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64; - /* now sixup the last line in the block to point to the next block */ + /* now fixup the last line in the block to point to the next block */ *(u64 *)((char *)bp->t2 + 1024*16-8) = bp->t2_mapping; /* Timer block array (MAX_CONN*8) phys uncached for now 1024 conns */ @@ -5950,11 +5950,11 @@ static void bnx2x_free_msix_irqs(struct bnx2x *bp) int i; free_irq(bp->msix_table[0].vector, bp->dev); - DP(NETIF_MSG_IFDOWN, "rleased sp irq (%d)\n", + DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n", bp->msix_table[0].vector); for_each_queue(bp, i) { - DP(NETIF_MSG_IFDOWN, "about to rlease fp #%d->%d irq " + DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d irq " "state(%x)\n", i, bp->msix_table[i + 1].vector, bnx2x_fp(bp, i, state)); @@ -6010,7 +6010,6 @@ static int bnx2x_enable_msix(struct bnx2x *bp) static int bnx2x_req_msix_irqs(struct bnx2x *bp) { - int i, rc; DP(NETIF_MSG_IFUP, "about to request sp irq\n"); @@ -6109,8 +6108,8 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, /* can take a while if any port is running */ int timeout = 500; - /* DP("waiting for state to become %d on IDX [%d]\n", - state, sb_idx); */ + DP(NETIF_MSG_IFUP, "%s for state to become %x on IDX [%d]\n", + poll ? "polling" : "waiting", state, idx); might_sleep(); @@ -6136,7 +6135,6 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, } - /* timeout! */ BNX2X_ERR("timeout waiting for ramrod %d on %d\n", state, idx); return -EBUSY; @@ -6146,7 +6144,7 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, static int bnx2x_setup_leading(struct bnx2x *bp) { - /* reset IGU staae */ + /* reset IGU state */ bnx2x_ack_sb(bp, DEF_SB_ID, CSTORM_ID, 0, IGU_INT_ENABLE, 0); /* SETUP ramrod */ @@ -6196,18 +6194,15 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) rc = FW_MSG_CODE_DRV_LOAD_COMMON; } - DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues); - /* if we can't use msix we only need one fp, * so try to enable msix with the requested number of fp's * and fallback to inta with one fp */ if (req_irq) { - if (use_inta) { bp->num_queues = 1; } else { - if (use_multi > 1 && use_multi <= 16) + if ((use_multi > 1) && (use_multi <= 16)) /* user requested number */ bp->num_queues = use_multi; else if (use_multi == 1) @@ -6216,15 +6211,17 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) bp->num_queues = 1; if (bnx2x_enable_msix(bp)) { - /* faild to enable msix */ + /* failed to enable msix */ bp->num_queues = 1; if (use_multi) - BNX2X_ERR("Muti requested but failed" + BNX2X_ERR("Multi requested but failed" " to enable MSI-X\n"); } } } + DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues); + if (bnx2x_alloc_mem(bp)) return -ENOMEM; @@ -6257,12 +6254,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) atomic_set(&bp->intr_sem, 0); - /* Reenable SP tasklet */ - /*if (bp->sp_task_en) { */ - /* tasklet_enable(&bp->sp_task);*/ - /*} else { */ - /* bp->sp_task_en = 1; */ - /*} */ /* Setup NIC internals and enable interrupts */ bnx2x_nic_init(bp); @@ -6401,14 +6392,14 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) int rc; - /* halt the connnection */ + /* halt the connection */ bp->fp[index].state = BNX2X_FP_STATE_HALTING; bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, 0, 0); rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, index, &(bp->fp[index].state), 1); - if (rc) /* timout */ + if (rc) /* timeout */ return rc; /* delete cfc entry */ @@ -6423,7 +6414,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) static void bnx2x_stop_leading(struct bnx2x *bp) { - /* if the other port is hadling traffic, + /* if the other port is handling traffic, this can take a lot of time */ int timeout = 500; @@ -6471,7 +6462,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq) msleep(1); /* Delete the timer: do it before disabling interrupts, as it - may be stil STAT_QUERY ramrod pending after stopping the timer */ + may be still STAT_QUERY ramrod pending after stopping the timer */ del_timer_sync(&bp->timer); /* Wait until stat ramrod returns and all SP tasks complete */ @@ -6932,7 +6923,7 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) val = SHMEM_RD(bp, validity_map[port]); if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) - != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) + != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) BNX2X_ERR("MCP validity signature bad\n"); bp->fw_seq = (SHMEM_RD(bp, drv_fw_mb[port].drv_mb_header) & @@ -7452,13 +7443,13 @@ static int bnx2x_nvram_read(struct bnx2x *bp, u32 offset, u8 *ret_buf, if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) { DP(NETIF_MSG_NVM, - "Invalid paramter: offset 0x%x buf_size 0x%x\n", + "Invalid parameter: offset 0x%x buf_size 0x%x\n", offset, buf_size); return -EINVAL; } if (offset + buf_size > bp->flash_size) { - DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +" + DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +" " buf_size (0x%x) > flash_size (0x%x)\n", offset, buf_size, bp->flash_size); return -EINVAL; @@ -7568,7 +7559,7 @@ static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf, u32 val; if (offset + buf_size > bp->flash_size) { - DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +" + DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +" " buf_size (0x%x) > flash_size (0x%x)\n", offset, buf_size, bp->flash_size); return -EINVAL; @@ -7621,13 +7612,13 @@ static int bnx2x_nvram_write(struct bnx2x *bp, u32 offset, u8 *data_buf, if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) { DP(NETIF_MSG_NVM, - "Invalid paramter: offset 0x%x buf_size 0x%x\n", + "Invalid parameter: offset 0x%x buf_size 0x%x\n", offset, buf_size); return -EINVAL; } if (offset + buf_size > bp->flash_size) { - DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +" + DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +" " buf_size (0x%x) > flash_size (0x%x)\n", offset, buf_size, bp->flash_size); return -EINVAL; @@ -8314,7 +8305,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) ETH_TX_BD_ETH_ADDR_TYPE_SHIFT); tx_bd->general_data |= 1; /* header nbd */ - /* remeber the first bd of the packet */ + /* remember the first bd of the packet */ tx_buf->first_bd = bd_prod; DP(NETIF_MSG_TX_QUEUED, @@ -8427,7 +8418,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_bd->vlan = cpu_to_le16(pkt_prod); /* this marks the bd * as one that has no individual mapping - * the FW ignors this flag in a bd not maked start + * the FW ignores this flag in a bd not marked start */ tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_SW_LSO; DP(NETIF_MSG_TX_QUEUED, @@ -8584,7 +8575,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) case SIOCGMIIPHY: data->phy_id = bp->phy_addr; - /* fallthru */ + /* fallthrough */ case SIOCGMIIREG: { u32 mii_regval; @@ -8633,7 +8624,7 @@ static int bnx2x_change_mtu(struct net_device *dev, int new_mtu) return -EINVAL; /* This does not race with packet allocation - * because the actuall alloc size is + * because the actual alloc size is * only updated as part of load */ dev->mtu = new_mtu; @@ -8813,7 +8804,7 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev, bnx2x_get_hwinfo(bp); if (CHIP_REV(bp) == CHIP_REV_FPGA) { - printk(KERN_ERR PFX "FPGA detacted. MCP disabled," + printk(KERN_ERR PFX "FPGA detected. MCP disabled," " will only init first device\n"); onefunc = 1; nomcp = 1; @@ -8944,7 +8935,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, rc = register_netdev(dev); if (rc) { - printk(KERN_ERR PFX "Cannot register net device\n"); + dev_err(&pdev->dev, "Cannot register net device\n"); if (bp->regview) iounmap(bp->regview); if (bp->doorbells) diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 4f7ae6f77452..7a01668e3978 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -517,7 +517,7 @@ struct bnx2x { */ u8 stat_pending; - /* End of fileds used in the performance code paths */ + /* End of fields used in the performance code paths */ int panic; int msglevel; -- cgit v1.2.2 From 250479504ff7d7e8c7d5cf85bedd40fb8d725429 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:50:16 -0800 Subject: [BNX2X]: Correct init_one() Correct PCI-E info printed by init_one() In one case it failed to free the netdev. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 41 ++++++++++++++++++++++++++--------------- drivers/net/bnx2x.h | 5 +++++ 2 files changed, 31 insertions(+), 15 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 7b2d7898f06d..77867161968b 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -8873,14 +8873,32 @@ err_out: return rc; } +static int __devinit bnx2x_get_pcie_width(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL); + + val = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT; + return val; +} + +/* return value of 1=2.5GHz 2=5GHz */ +static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL); + + val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT; + return val; +} + static int __devinit bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int version_printed; struct net_device *dev = NULL; struct bnx2x *bp; - int rc, i; + int rc; int port = PCI_FUNC(pdev->devfn); + DECLARE_MAC_BUF(mac); if (version_printed++ == 0) printk(KERN_INFO "%s", version); @@ -8897,6 +8915,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, if (port && onefunc) { printk(KERN_ERR PFX "second function disabled. exiting\n"); + free_netdev(dev); return 0; } @@ -8950,22 +8969,14 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); bp->name = board_info[ent->driver_data].name; - printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz " - "found at mem %lx, IRQ %d, ", - dev->name, bp->name, + printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx," + " IRQ %d, ", dev->name, bp->name, ((CHIP_ID(bp) & 0xf000) >> 12) + 'A', ((CHIP_ID(bp) & 0x0ff0) >> 4), - ((bp->flags & PCIX_FLAG) ? "-X" : ""), - ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"), - bp->bus_speed_mhz, - dev->base_addr, - bp->pdev->irq); - - printk("node addr "); - for (i = 0; i < 6; i++) - printk("%2.2x", dev->dev_addr[i]); - printk("\n"); - + bnx2x_get_pcie_width(bp), + (bnx2x_get_pcie_speed(bp) == 2) ? "5GHz (Gen2)" : "2.5GHz", + dev->base_addr, bp->pdev->irq); + printk(KERN_CONT "node addr %s\n", print_mac(mac, dev->dev_addr)); return 0; } diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 7a01668e3978..ea9100855c5c 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -867,6 +867,11 @@ struct bnx2x { DPM_TRIGER_TYPE); \ } while (0) +/* PCIE link and speed */ +#define PCICFG_LINK_WIDTH 0x1f00000 +#define PCICFG_LINK_WIDTH_SHIFT 20 +#define PCICFG_LINK_SPEED 0xf0000 +#define PCICFG_LINK_SPEED_SHIFT 16 /* stuff added to make the code fit 80Col */ -- cgit v1.2.2 From f14106478e372e64be54a3cdab1e2fa83a5c8a35 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:51:50 -0800 Subject: [BNX2X]: Correct Link management Properly protect PHY access between two devices on the same board with a HW lock. Use GPIO to clear all previous configurations before changing link parameters. Shut down the external PHY in case of fan failure. Reducing the MDC/MDIO clock to 2.5MHz due to problems with some devices. Resolve the flow control response according to autoneg with external PHY. Unmasking all PHY interrupts in single write to prevent a race in the interrupts order. LASI indication fixes to work with peculiarities of PHYs. Disable MAC RX to avoid a HW bug when closing the MAC under traffic. Disable parallel detection on HiGig due to HW limitation. Updating the shared memory structure to work with the current bootcode. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 1711 ++++++++++++++++++++++++++++++++----------- drivers/net/bnx2x.h | 34 +- drivers/net/bnx2x_fw_defs.h | 2 +- drivers/net/bnx2x_hsi.h | 428 ++++++----- drivers/net/bnx2x_reg.h | 212 +++++- 5 files changed, 1736 insertions(+), 651 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 77867161968b..5cd785064ba3 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -1,6 +1,6 @@ /* bnx2x.c: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -65,7 +65,7 @@ #define DRV_MODULE_VERSION "0.40.15" #define DRV_MODULE_RELDATE "$DateTime: 2007/11/15 07:28:37 $" -#define BNX2X_BC_VER 0x040009 +#define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung. */ #define TX_TIMEOUT (5*HZ) @@ -78,7 +78,7 @@ MODULE_AUTHOR("Eliezer Tamir "); MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); -MODULE_INFO(cvs_version, "$Revision: #356 $"); +MODULE_INFO(cvs_version, "$Revision: #404 $"); static int use_inta; static int poll; @@ -1181,12 +1181,175 @@ static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits) return val; } +static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 cnt; + u32 lock_status; + u32 resource_bit = (1 << resource); + u8 func = bp->port; + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + /* Validating that the resource is not already taken */ + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); + if (lock_status & resource_bit) { + DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EEXIST; + } + + /* Try for 1 second every 5ms */ + for (cnt = 0; cnt < 200; cnt++) { + /* Try to acquire the lock */ + REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8 + 4, + resource_bit); + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); + if (lock_status & resource_bit) + return 0; + + msleep(5); + } + DP(NETIF_MSG_HW, "Timeout\n"); + return -EAGAIN; +} + +static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + u8 func = bp->port; + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + /* Validating that the resource is currently taken */ + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); + if (!(lock_status & resource_bit)) { + DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EFAULT; + } + + REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8, resource_bit); + return 0; +} + +static int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ bp->port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO and mask except the float bits */ + gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT); + + switch (mode) { + case MISC_REGISTERS_GPIO_OUTPUT_LOW: + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n", + gpio_num, gpio_shift); + /* clear FLOAT and set CLR */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_OUTPUT_HIGH: + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n", + gpio_num, gpio_shift); + /* clear FLOAT and set SET */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS); + break; + + case MISC_REGISTERS_GPIO_INPUT_HI_Z : + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n", + gpio_num, gpio_shift); + /* set FLOAT */ + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_GPIO, gpio_reg); + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO); + + return 0; +} + +static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode) +{ + u32 spio_mask = (1 << spio_num); + u32 spio_reg; + + if ((spio_num < MISC_REGISTERS_SPIO_4) || + (spio_num > MISC_REGISTERS_SPIO_7)) { + BNX2X_ERR("Invalid SPIO %d\n", spio_num); + return -EINVAL; + } + + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); + /* read SPIO and mask except the float bits */ + spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT); + + switch (mode) { + case MISC_REGISTERS_SPIO_OUTPUT_LOW : + DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num); + /* clear FLOAT and set CLR */ + spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_CLR_POS); + break; + + case MISC_REGISTERS_SPIO_OUTPUT_HIGH : + DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num); + /* clear FLOAT and set SET */ + spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_SET_POS); + break; + + case MISC_REGISTERS_SPIO_INPUT_HI_Z: + DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num); + /* set FLOAT */ + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_SPIO, spio_reg); + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO); + + return 0; +} + static int bnx2x_mdio22_write(struct bnx2x *bp, u32 reg, u32 val) { - int rc; - u32 tmp, i; int port = bp->port; u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + u32 tmp; + int i, rc; /* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x val 0x%08x\n", bp->phy_addr, reg, val); */ @@ -1238,8 +1401,8 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val) { int port = bp->port; u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val, i; - int rc; + u32 val; + int i, rc; if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { @@ -1288,58 +1451,54 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val) return rc; } -static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val) +static int bnx2x_mdio45_ctrl_write(struct bnx2x *bp, u32 mdio_ctrl, + u32 phy_addr, u32 reg, u32 addr, u32 val) { - int rc = 0; - u32 tmp, i; - int port = bp->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - tmp &= ~EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); - REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - } + u32 tmp; + int i, rc = 0; - /* set clause 45 mode */ - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - tmp |= EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); + /* set clause 45 mode, slow down the MDIO clock to 2.5MHz + * (a value of 49==0x31) and make sure that the AUTO poll is off + */ + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + tmp &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT); + tmp |= (EMAC_MDIO_MODE_CLAUSE_45 | + (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp); + REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + udelay(40); /* address */ - tmp = ((bp->phy_addr << 21) | (reg << 16) | addr | + tmp = ((phy_addr << 21) | (reg << 16) | addr | EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); for (i = 0; i < 50; i++) { udelay(10); - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { udelay(5); break; } } - if (tmp & EMAC_MDIO_COMM_START_BUSY) { BNX2X_ERR("write phy register failed\n"); rc = -EBUSY; + } else { /* data */ - tmp = ((bp->phy_addr << 21) | (reg << 16) | val | + tmp = ((phy_addr << 21) | (reg << 16) | val | EMAC_MDIO_COMM_COMMAND_WRITE_45 | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); for (i = 0; i < 50; i++) { udelay(10); - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { udelay(5); break; @@ -1353,75 +1512,78 @@ static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val) } } - /* unset clause 45 mode */ - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - tmp &= ~EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); + /* unset clause 45 mode, set the MDIO clock to a faster value + * (0x13 => 6.25Mhz) and restore the AUTO poll if needed + */ + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + tmp &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT); + tmp |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) tmp |= EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); - } + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp); return rc; } -static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr, - u32 *ret_val) +static int bnx2x_mdio45_write(struct bnx2x *bp, u32 phy_addr, u32 reg, + u32 addr, u32 val) { - int port = bp->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val, i; - int rc = 0; + u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + return bnx2x_mdio45_ctrl_write(bp, emac_base, phy_addr, + reg, addr, val); +} - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - val &= ~EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); - REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - } +static int bnx2x_mdio45_ctrl_read(struct bnx2x *bp, u32 mdio_ctrl, + u32 phy_addr, u32 reg, u32 addr, + u32 *ret_val) +{ + u32 val; + int i, rc = 0; - /* set clause 45 mode */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - val |= EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); + /* set clause 45 mode, slow down the MDIO clock to 2.5MHz + * (a value of 49==0x31) and make sure that the AUTO poll is off + */ + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + val &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT); + val |= (EMAC_MDIO_MODE_CLAUSE_45 | + (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); + REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + udelay(40); /* address */ - val = ((bp->phy_addr << 21) | (reg << 16) | addr | + val = ((phy_addr << 21) | (reg << 16) | addr | EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); for (i = 0; i < 50; i++) { udelay(10); - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(val & EMAC_MDIO_COMM_START_BUSY)) { udelay(5); break; } } - if (val & EMAC_MDIO_COMM_START_BUSY) { BNX2X_ERR("read phy register failed\n"); *ret_val = 0; rc = -EBUSY; + } else { /* data */ - val = ((bp->phy_addr << 21) | (reg << 16) | + val = ((phy_addr << 21) | (reg << 16) | EMAC_MDIO_COMM_COMMAND_READ_45 | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); for (i = 0; i < 50; i++) { udelay(10); - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(val & EMAC_MDIO_COMM_START_BUSY)) { val &= EMAC_MDIO_COMM_DATA; break; @@ -1438,31 +1600,39 @@ static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr, *ret_val = val; } - /* unset clause 45 mode */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - val &= ~EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); + /* unset clause 45 mode, set the MDIO clock to a faster value + * (0x13 => 6.25Mhz) and restore the AUTO poll if needed + */ + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + val &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT); + val |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) val |= EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); - } + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); return rc; } -static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val) +static int bnx2x_mdio45_read(struct bnx2x *bp, u32 phy_addr, u32 reg, + u32 addr, u32 *ret_val) +{ + u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + + return bnx2x_mdio45_ctrl_read(bp, emac_base, phy_addr, + reg, addr, ret_val); +} + +static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 phy_addr, u32 reg, + u32 addr, u32 val) { int i; u32 rd_val; might_sleep(); for (i = 0; i < 10; i++) { - bnx2x_mdio45_write(bp, reg, addr, val); + bnx2x_mdio45_write(bp, phy_addr, reg, addr, val); msleep(5); - bnx2x_mdio45_read(bp, reg, addr, &rd_val); + bnx2x_mdio45_read(bp, phy_addr, reg, addr, &rd_val); /* if the read value is not the same as the value we wrote, we should write it again */ if (rd_val == val) @@ -1476,10 +1646,73 @@ static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val) * link management */ +static void bnx2x_pause_resolve(struct bnx2x *bp, u32 pause_result) +{ + switch (pause_result) { /* ASYM P ASYM P */ + case 0xb: /* 1 0 1 1 */ + bp->flow_ctrl = FLOW_CTRL_TX; + break; + + case 0xe: /* 1 1 1 0 */ + bp->flow_ctrl = FLOW_CTRL_RX; + break; + + case 0x5: /* 0 1 0 1 */ + case 0x7: /* 0 1 1 1 */ + case 0xd: /* 1 1 0 1 */ + case 0xf: /* 1 1 1 1 */ + bp->flow_ctrl = FLOW_CTRL_BOTH; + break; + + default: + break; + } +} + +static u8 bnx2x_ext_phy_resove_fc(struct bnx2x *bp) +{ + u32 ext_phy_addr; + u32 ld_pause; /* local */ + u32 lp_pause; /* link partner */ + u32 an_complete; /* AN complete */ + u32 pause_result; + u8 ret = 0; + + ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + + /* read twice */ + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_STATUS, &an_complete); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_STATUS, &an_complete); + + if (an_complete & EXT_PHY_KR_AUTO_NEG_COMPLETE) { + ret = 1; + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_AUTO_NEG_ADVERT, &ld_pause); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_LP_AUTO_NEG, &lp_pause); + pause_result = (ld_pause & + EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 8; + pause_result |= (lp_pause & + EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 10; + DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n", + pause_result); + bnx2x_pause_resolve(bp, pause_result); + } + return ret; +} + static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status) { - u32 ld_pause; /* local driver */ - u32 lp_pause; /* link partner */ + u32 ld_pause; /* local driver */ + u32 lp_pause; /* link partner */ u32 pause_result; bp->flow_ctrl = 0; @@ -1501,45 +1734,57 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status) pause_result |= (lp_pause & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7; DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result); + bnx2x_pause_resolve(bp, pause_result); + } else if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) || + !(bnx2x_ext_phy_resove_fc(bp))) { + /* forced speed */ + if (bp->req_autoneg & AUTONEG_FLOW_CTRL) { + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + if (bp->dev->mtu <= 4500) + bp->flow_ctrl = FLOW_CTRL_BOTH; + else + bp->flow_ctrl = FLOW_CTRL_TX; + break; - switch (pause_result) { /* ASYM P ASYM P */ - case 0xb: /* 1 0 1 1 */ - bp->flow_ctrl = FLOW_CTRL_TX; - break; - - case 0xe: /* 1 1 1 0 */ - bp->flow_ctrl = FLOW_CTRL_RX; - break; + case FLOW_CTRL_TX: + bp->flow_ctrl = FLOW_CTRL_TX; + break; - case 0x5: /* 0 1 0 1 */ - case 0x7: /* 0 1 1 1 */ - case 0xd: /* 1 1 0 1 */ - case 0xf: /* 1 1 1 1 */ - bp->flow_ctrl = FLOW_CTRL_BOTH; - break; + case FLOW_CTRL_RX: + if (bp->dev->mtu <= 4500) + bp->flow_ctrl = FLOW_CTRL_RX; + break; - default: - break; - } + case FLOW_CTRL_BOTH: + if (bp->dev->mtu <= 4500) + bp->flow_ctrl = FLOW_CTRL_BOTH; + else + bp->flow_ctrl = FLOW_CTRL_TX; + break; - } else { /* forced mode */ - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - if (bp->dev->mtu <= 4500) - bp->flow_ctrl = FLOW_CTRL_BOTH; - else - bp->flow_ctrl = FLOW_CTRL_TX; - break; + case FLOW_CTRL_NONE: + default: + break; + } + } else { /* forced mode */ + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while" + " req_autoneg 0x%x\n", + bp->req_flow_ctrl, bp->req_autoneg); + break; - case FLOW_CTRL_TX: - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: - bp->flow_ctrl = bp->req_flow_ctrl; - break; + case FLOW_CTRL_TX: + case FLOW_CTRL_RX: + case FLOW_CTRL_BOTH: + bp->flow_ctrl = bp->req_flow_ctrl; + break; - case FLOW_CTRL_NONE: - default: - break; + case FLOW_CTRL_NONE: + default: + break; + } } } DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", bp->flow_ctrl); @@ -1550,9 +1795,9 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status) bp->link_status = 0; if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { - DP(NETIF_MSG_LINK, "link up\n"); + DP(NETIF_MSG_LINK, "phy link up\n"); - bp->link_up = 1; + bp->phy_link_up = 1; bp->link_status |= LINK_STATUS_LINK_UP; if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS) @@ -1661,20 +1906,20 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status) bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED; } else { /* link_down */ - DP(NETIF_MSG_LINK, "link down\n"); + DP(NETIF_MSG_LINK, "phy link down\n"); - bp->link_up = 0; + bp->phy_link_up = 0; bp->line_speed = 0; bp->duplex = DUPLEX_FULL; bp->flow_ctrl = 0; } - DP(NETIF_MSG_LINK, "gp_status 0x%x link_up %d\n" + DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %d\n" DP_LEVEL " line_speed %d duplex %d flow_ctrl 0x%x" " link_status 0x%x\n", - gp_status, bp->link_up, bp->line_speed, bp->duplex, bp->flow_ctrl, - bp->link_status); + gp_status, bp->phy_link_up, bp->line_speed, bp->duplex, + bp->flow_ctrl, bp->link_status); } static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g) @@ -1684,38 +1929,38 @@ static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g) /* first reset all status * we assume only one line will be change at a time */ bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_XGXS0_LINK_STATUS | - NIG_SERDES0_LINK_STATUS | - NIG_STATUS_INTERRUPT_XGXS0_LINK10G)); - if (bp->link_up) { + (NIG_STATUS_XGXS0_LINK10G | + NIG_STATUS_XGXS0_LINK_STATUS | + NIG_STATUS_SERDES0_LINK_STATUS)); + if (bp->phy_link_up) { if (is_10g) { /* Disable the 10G link interrupt * by writing 1 to the status register */ - DP(NETIF_MSG_LINK, "10G XGXS link up\n"); + DP(NETIF_MSG_LINK, "10G XGXS phy link up\n"); bnx2x_bits_en(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_STATUS_INTERRUPT_XGXS0_LINK10G); + NIG_STATUS_XGXS0_LINK10G); } else if (bp->phy_flags & PHY_XGXS_FLAG) { /* Disable the link interrupt * by writing 1 to the relevant lane * in the status register */ - DP(NETIF_MSG_LINK, "1G XGXS link up\n"); + DP(NETIF_MSG_LINK, "1G XGXS phy link up\n"); bnx2x_bits_en(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, ((1 << bp->ser_lane) << - NIG_XGXS0_LINK_STATUS_SIZE)); + NIG_STATUS_XGXS0_LINK_STATUS_SIZE)); } else { /* SerDes */ - DP(NETIF_MSG_LINK, "SerDes link up\n"); + DP(NETIF_MSG_LINK, "SerDes phy link up\n"); /* Disable the link interrupt * by writing 1 to the status register */ bnx2x_bits_en(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_SERDES0_LINK_STATUS); + NIG_STATUS_SERDES0_LINK_STATUS); } } else { /* link_down */ @@ -1726,91 +1971,182 @@ static int bnx2x_ext_phy_is_link_up(struct bnx2x *bp) { u32 ext_phy_type; u32 ext_phy_addr; - u32 local_phy; - u32 val = 0; + u32 val1 = 0, val2; u32 rx_sd, pcs_status; if (bp->phy_flags & PHY_XGXS_FLAG) { - local_phy = bp->phy_addr; ext_phy_addr = ((bp->ext_phy_config & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - bp->phy_addr = (u8)ext_phy_addr; ext_phy_type = XGXS_EXT_PHY_TYPE(bp); switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: DP(NETIF_MSG_LINK, "XGXS Direct\n"); - val = 1; + val1 = 1; break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: DP(NETIF_MSG_LINK, "XGXS 8705\n"); - bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_WIS_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_WIS_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PMD_RX_SD, &rx_sd); - val = (rx_sd & 0x1); + DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd); + val1 = (rx_sd & 0x1); break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: DP(NETIF_MSG_LINK, "XGXS 8706\n"); - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PMD_RX_SD, &rx_sd); - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PCS_DEVAD, - EXT_PHY_OPT_PCS_STATUS, &pcs_status); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PCS_DEVAD, + EXT_PHY_OPT_PCS_STATUS, &pcs_status); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_LINK_STATUS, &val2); + DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x" - " pcs_status 0x%x\n", rx_sd, pcs_status); - /* link is up if both bit 0 of pmd_rx and - * bit 0 of pcs_status are set + " pcs_status 0x%x 1Gbps link_status 0x%x 0x%x\n", + rx_sd, pcs_status, val2, (val2 & (1<<1))); + /* link is up if both bit 0 of pmd_rx_sd and + * bit 0 of pcs_status are set, or if the autoneg bit + 1 is set + */ + val1 = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1))); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); + + /* clear the interrupt LASI status register */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PCS_DEVAD, + EXT_PHY_KR_LASI_STATUS, &val2); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PCS_DEVAD, + EXT_PHY_KR_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "KR LASI status 0x%x->0x%x\n", + val2, val1); + /* Check the LASI */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0x9003, &val2); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0x9003, &val1); + DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n", + val2, val1); + /* Check the link status */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PCS_DEVAD, + EXT_PHY_KR_PCS_STATUS, &val2); + DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2); + /* Check the link status on 1.1.2 */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val2); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val1); + DP(NETIF_MSG_LINK, + "KR PMA status 0x%x->0x%x\n", val2, val1); + val1 = ((val1 & 4) == 4); + /* If 1G was requested assume the link is up */ + if (!(bp->req_autoneg & AUTONEG_SPEED) && + (bp->req_line_speed == SPEED_1000)) + val1 = 1; + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val2); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, + "10G-base-T LASI status 0x%x->0x%x\n", val2, val1); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val2); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val1); + DP(NETIF_MSG_LINK, + "10G-base-T PMA status 0x%x->0x%x\n", val2, val1); + val1 = ((val1 & 4) == 4); + /* if link is up + * print the AN outcome of the SFX7101 PHY */ - val = (rx_sd & pcs_status); + if (val1) { + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0x21, &val2); + DP(NETIF_MSG_LINK, + "SFX7101 AN status 0x%x->%s\n", val2, + (val2 & (1<<14)) ? "Master" : "Slave"); + } break; default: DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", bp->ext_phy_config); - val = 0; + val1 = 0; break; } - bp->phy_addr = local_phy; } else { /* SerDes */ ext_phy_type = SERDES_EXT_PHY_TYPE(bp); switch (ext_phy_type) { case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT: DP(NETIF_MSG_LINK, "SerDes Direct\n"); - val = 1; + val1 = 1; break; case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: DP(NETIF_MSG_LINK, "SerDes 5482\n"); - val = 1; + val1 = 1; break; default: DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n", bp->ext_phy_config); - val = 0; + val1 = 0; break; } } - return val; + return val1; } static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb) @@ -1935,6 +2271,35 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb) bp->stats_state = STATS_STATE_ENABLE; } +static void bnx2x_bmac_rx_disable(struct bnx2x *bp) +{ + int port = bp->port; + u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + u32 wb_write[2]; + + /* Only if the bmac is out of reset */ + if (REG_RD(bp, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)) { + /* Clear Rx Enable bit in BMAC_CONTROL register */ +#ifdef BNX2X_DMAE_RD + bnx2x_read_dmae(bp, bmac_addr + + BIGMAC_REGISTER_BMAC_CONTROL, 2); + wb_write[0] = *bnx2x_sp(bp, wb_data[0]); + wb_write[1] = *bnx2x_sp(bp, wb_data[1]); +#else + wb_write[0] = REG_RD(bp, + bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL); + wb_write[1] = REG_RD(bp, + bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL + 4); +#endif + wb_write[0] &= ~BMAC_CONTROL_RX_ENABLE; + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, + wb_write, 2); + msleep(1); + } +} + static void bnx2x_emac_enable(struct bnx2x *bp) { int port = bp->port; @@ -2233,7 +2598,7 @@ static void bnx2x_pbf_update(struct bnx2x *bp) static void bnx2x_update_mng(struct bnx2x *bp) { if (!nomcp) - SHMEM_WR(bp, drv_fw_mb[bp->port].link_status, + SHMEM_WR(bp, port_mb[bp->port].link_status, bp->link_status); } @@ -2295,19 +2660,19 @@ static void bnx2x_link_down(struct bnx2x *bp) DP(BNX2X_MSG_STATS, "stats_state - STOP\n"); } - /* indicate link down */ + /* indicate no mac active */ bp->phy_flags &= ~(PHY_BMAC_FLAG | PHY_EMAC_FLAG); - /* reset BigMac */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + /* update shared memory */ + bnx2x_update_mng(bp); - /* ignore drain flag interrupt */ /* activate nig drain */ NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); - /* update shared memory */ - bnx2x_update_mng(bp); + /* reset BigMac */ + bnx2x_bmac_rx_disable(bp); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); /* indicate link down */ bnx2x_link_report(bp); @@ -2318,14 +2683,15 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp); /* This function is called upon link interrupt */ static void bnx2x_link_update(struct bnx2x *bp) { - u32 gp_status; int port = bp->port; int i; + u32 gp_status; int link_10g; - DP(NETIF_MSG_LINK, "port %x, is xgxs %x, stat_mask 0x%x," + DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x," " int_mask 0x%x, saved_mask 0x%x, MI_INT %x, SERDES_LINK %x," - " 10G %x, XGXS_LINK %x\n", port, (bp->phy_flags & PHY_XGXS_FLAG), + " 10G %x, XGXS_LINK %x\n", port, + (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4), REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), bp->nig_mask, REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), @@ -2337,7 +2703,7 @@ static void bnx2x_link_update(struct bnx2x *bp) might_sleep(); MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_GP_STATUS); /* avoid fast toggling */ - for (i = 0 ; i < 10 ; i++) { + for (i = 0; i < 10; i++) { msleep(10); bnx2x_mdio22_read(bp, MDIO_GP_STATUS_TOP_AN_STATUS1, &gp_status); @@ -2352,7 +2718,8 @@ static void bnx2x_link_update(struct bnx2x *bp) bnx2x_link_int_ack(bp, link_10g); /* link is up only if both local phy and external phy are up */ - if (bp->link_up && bnx2x_ext_phy_is_link_up(bp)) { + bp->link_up = (bp->phy_link_up && bnx2x_ext_phy_is_link_up(bp)); + if (bp->link_up) { if (link_10g) { bnx2x_bmac_enable(bp, 0); bnx2x_leds_set(bp, SPEED_10000); @@ -2428,7 +2795,9 @@ static void bnx2x_reset_unicore(struct bnx2x *bp) } } - BNX2X_ERR("BUG! unicore is still in reset!\n"); + BNX2X_ERR("BUG! %s (0x%x) is still in reset!\n", + (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", + bp->phy_addr); } static void bnx2x_set_swap_lanes(struct bnx2x *bp) @@ -2476,12 +2845,12 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp) MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_10G_PARALLEL_DETECT); bnx2x_mdio22_write(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT); bnx2x_mdio22_read(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - &control2); + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, + &control2); if (bp->autoneg & AUTONEG_PARALLEL) { control2 |= @@ -2491,8 +2860,14 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp) ~MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN; } bnx2x_mdio22_write(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - control2); + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, + control2); + + /* Disable parallel detection of HiG */ + MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2); + bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G, + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS | + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS); } } @@ -2626,7 +3001,7 @@ static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x *bp) MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G); /* set extended capabilities */ - if (bp->advertising & ADVERTISED_2500baseT_Full) + if (bp->advertising & ADVERTISED_2500baseX_Full) val |= MDIO_OVER_1G_UP1_2_5G; if (bp->advertising & ADVERTISED_10000baseT_Full) val |= MDIO_OVER_1G_UP1_10G; @@ -2639,23 +3014,94 @@ static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x *bp) { u32 an_adv; - /* for AN, we are always publishing full duplex */ - an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; + /* for AN, we are always publishing full duplex */ + an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; + + /* resolve pause mode and advertisement + * Please refer to Table 28B-3 of the 802.3ab-1999 spec */ + if (bp->req_autoneg & AUTONEG_FLOW_CTRL) { + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + if (bp->dev->mtu <= 4500) { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } else { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + } + break; + + case FLOW_CTRL_TX: + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + break; + + case FLOW_CTRL_RX: + if (bp->dev->mtu <= 4500) { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } else { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + bp->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } + break; + + case FLOW_CTRL_BOTH: + if (bp->dev->mtu <= 4500) { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } else { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + } + break; + + case FLOW_CTRL_NONE: + default: + an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + bp->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + break; + } + } else { /* forced mode */ + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while" + " req_autoneg 0x%x\n", + bp->req_flow_ctrl, bp->req_autoneg); + break; + + case FLOW_CTRL_TX: + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + break; + + case FLOW_CTRL_RX: + case FLOW_CTRL_BOTH: + an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + break; - /* set pause */ - switch (bp->pause_mode) { - case PAUSE_SYMMETRIC: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC; - break; - case PAUSE_ASYMMETRIC: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - break; - case PAUSE_BOTH: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - break; - case PAUSE_NONE: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; - break; + case FLOW_CTRL_NONE: + default: + an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + bp->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + break; + } } MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); @@ -2753,47 +3199,162 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x *bp) static void bnx2x_link_int_enable(struct bnx2x *bp) { int port = bp->port; + u32 ext_phy_type; + u32 mask; /* setting the status to report on link up for either XGXS or SerDes */ bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_XGXS0_LINK_STATUS | - NIG_STATUS_INTERRUPT_XGXS0_LINK10G | - NIG_SERDES0_LINK_STATUS)); + (NIG_STATUS_XGXS0_LINK10G | + NIG_STATUS_XGXS0_LINK_STATUS | + NIG_STATUS_SERDES0_LINK_STATUS)); if (bp->phy_flags & PHY_XGXS_FLAG) { - /* TBD - - * in force mode (not AN) we can enable just the relevant - * interrupt - * Even in AN we might enable only one according to the AN - * speed mask - */ - bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G)); - DP(NETIF_MSG_LINK, "enable XGXS interrupt\n"); + mask = (NIG_MASK_XGXS0_LINK10G | + NIG_MASK_XGXS0_LINK_STATUS); + DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n"); + ext_phy_type = XGXS_EXT_PHY_TYPE(bp); + if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && + (ext_phy_type != + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) { + mask |= NIG_MASK_MI_INT; + DP(NETIF_MSG_LINK, "enabled external phy int\n"); + } } else { /* SerDes */ - bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_SERDES0_LINK_STATUS); - DP(NETIF_MSG_LINK, "enable SerDes interrupt\n"); + mask = NIG_MASK_SERDES0_LINK_STATUS; + DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n"); + ext_phy_type = SERDES_EXT_PHY_TYPE(bp); + if ((ext_phy_type != + PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) && + (ext_phy_type != + PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) { + mask |= NIG_MASK_MI_INT; + DP(NETIF_MSG_LINK, "enabled external phy int\n"); + } } + bnx2x_bits_en(bp, + NIG_REG_MASK_INTERRUPT_PORT0 + port*4, + mask); + DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x," + " int_mask 0x%x, MI_INT %x, SERDES_LINK %x," + " 10G %x, XGXS_LINK %x\n", port, + (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", + REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4), + REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), + REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), + REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c), + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68) + ); +} + +static void bnx2x_bcm8072_external_rom_boot(struct bnx2x *bp) +{ + u32 ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + u32 fw_ver1, fw_ver2; + + /* Need to wait 200ms after reset */ + msleep(200); + /* Boot port from external ROM + * Set ser_boot_ctl bit in the MISC_CTRL1 register + */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + EXT_PHY_KR_MISC_CTRL1, 0x0001); + + /* Reset internal microprocessor */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, + EXT_PHY_KR_ROM_RESET_INTERNAL_MP); + /* set micro reset = 0 */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, + EXT_PHY_KR_ROM_MICRO_RESET); + /* Reset internal microprocessor */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, + EXT_PHY_KR_ROM_RESET_INTERNAL_MP); + /* wait for 100ms for code download via SPI port */ + msleep(100); + + /* Clear ser_boot_ctl bit */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + EXT_PHY_KR_MISC_CTRL1, 0x0000); + /* Wait 100ms */ + msleep(100); + + /* Print the PHY FW version */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0xca19, &fw_ver1); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0xca1a, &fw_ver2); + DP(NETIF_MSG_LINK, + "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2); +} + +static void bnx2x_bcm8072_force_10G(struct bnx2x *bp) +{ + u32 ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + + /* Force KR or KX */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL, + 0x2040); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL2, + 0x000b); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_PMD_CTRL, + 0x0000); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, EXT_PHY_KR_CTRL, + 0x0000); } static void bnx2x_ext_phy_init(struct bnx2x *bp) { - int port = bp->port; u32 ext_phy_type; u32 ext_phy_addr; - u32 local_phy; + u32 cnt; + u32 ctrl; + u32 val = 0; if (bp->phy_flags & PHY_XGXS_FLAG) { - local_phy = bp->phy_addr; ext_phy_addr = ((bp->ext_phy_config & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); ext_phy_type = XGXS_EXT_PHY_TYPE(bp); + /* Make sure that the soft reset is off (expect for the 8072: + * due to the lock, it will be done inside the specific + * handling) + */ + if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)) { + /* Wait for soft reset to get cleared upto 1 sec */ + for (cnt = 0; cnt < 1000; cnt++) { + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL, &ctrl); + if (!(ctrl & (1<<15))) + break; + msleep(1); + } + DP(NETIF_MSG_LINK, + "control reg 0x%x (after %d ms)\n", ctrl, cnt); + } + switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: DP(NETIF_MSG_LINK, "XGXS Direct\n"); @@ -2801,49 +3362,235 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: DP(NETIF_MSG_LINK, "XGXS 8705\n"); - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - bp->phy_addr = ext_phy_type; - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PMD_MISC_CNTL, 0x8288); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PHY_IDENTIFIER, 0x7fbf); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_CMU_PLL_BYPASS, 0x0100); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_WIS_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_WIS_DEVAD, EXT_PHY_OPT_LASI_CNTL, 0x1); break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: DP(NETIF_MSG_LINK, "XGXS 8706\n"); - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - bp->phy_addr = ext_phy_type; - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_PMD_DIGITAL_CNT, - 0x400); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + if (!(bp->req_autoneg & AUTONEG_SPEED)) { + /* Force speed */ + if (bp->req_line_speed == SPEED_10000) { + DP(NETIF_MSG_LINK, + "XGXS 8706 force 10Gbps\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_PMD_DIGITAL_CNT, + 0x400); + } else { + /* Force 1Gbps */ + DP(NETIF_MSG_LINK, + "XGXS 8706 force 1Gbps\n"); + + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL, + 0x0040); + + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL2, + 0x000D); + } + + /* Enable LASI */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_CNTL, + 0x1); + } else { + /* AUTONEG */ + /* Allow CL37 through CL73 */ + DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_CL37_CL73, + 0x040c); + + /* Enable Full-Duplex advertisment on CL37 */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_CL37_FD, + 0x0020); + /* Enable CL37 AN */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_CL37_AN, + 0x1000); + /* Advertise 10G/1G support */ + if (bp->advertising & + ADVERTISED_1000baseT_Full) + val = (1<<5); + if (bp->advertising & + ADVERTISED_10000baseT_Full) + val |= (1<<7); + + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_ADV, val); + /* Enable LASI */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_CNTL, + 0x1); + + /* Enable clause 73 AN */ + bnx2x_mdio45_write(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_CNTL, + 0x1200); + } + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); + /* Wait for soft reset to get cleared upto 1 sec */ + for (cnt = 0; cnt < 1000; cnt++) { + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL, &ctrl); + if (!(ctrl & (1<<15))) + break; + msleep(1); + } + DP(NETIF_MSG_LINK, + "8072 control reg 0x%x (after %d ms)\n", + ctrl, cnt); + + bnx2x_bcm8072_external_rom_boot(bp); + DP(NETIF_MSG_LINK, "Finshed loading 8072 KR ROM\n"); + + /* enable LASI */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0x9000, 0x0400); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + EXT_PHY_KR_LASI_CNTL, 0x0004); + + /* If this is forced speed, set to KR or KX + * (all other are not supported) + */ + if (!(bp->req_autoneg & AUTONEG_SPEED)) { + if (bp->req_line_speed == SPEED_10000) { + bnx2x_bcm8072_force_10G(bp); + DP(NETIF_MSG_LINK, + "Forced speed 10G on 8072\n"); + /* unlock */ + bnx2x_hw_unlock(bp, + HW_LOCK_RESOURCE_8072_MDIO); + break; + } else + val = (1<<5); + } else { + + /* Advertise 10G/1G support */ + if (bp->advertising & + ADVERTISED_1000baseT_Full) + val = (1<<5); + if (bp->advertising & + ADVERTISED_10000baseT_Full) + val |= (1<<7); + } + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0x11, val); + /* Add support for CL37 ( passive mode ) I */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0x8370, 0x040c); + /* Add support for CL37 ( passive mode ) II */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0xffe4, 0x20); + /* Add support for CL37 ( passive mode ) III */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0xffe0, 0x1000); + /* Restart autoneg */ + msleep(500); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_CTRL, 0x1200); + DP(NETIF_MSG_LINK, "8072 Autoneg Restart: " + "1G %ssupported 10G %ssupported\n", + (val & (1<<5)) ? "" : "not ", + (val & (1<<7)) ? "" : "not "); + + /* unlock */ + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + DP(NETIF_MSG_LINK, + "Setting the SFX7101 LASI indication\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_LASI_CNTL, 0x1); + DP(NETIF_MSG_LINK, + "Setting the SFX7101 LED to blink on traffic\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + 0xC007, (1<<3)); + + /* read modify write pause advertizing */ + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_AUTO_NEG_ADVERT, &val); + val &= ~EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH; + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + if (bp->advertising & ADVERTISED_Pause) + val |= EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE; + + if (bp->advertising & ADVERTISED_Asym_Pause) { + val |= + EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC; + } + DP(NETIF_MSG_LINK, "SFX7101 AN advertize 0x%x\n", val); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_AUTO_NEG_ADVERT, val); + /* Restart autoneg */ + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_CTRL, &val); + val |= 0x200; + bnx2x_mdio45_write(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_CTRL, val); break; default: - DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", - bp->ext_phy_config); + BNX2X_ERR("BAD XGXS ext_phy_config 0x%x\n", + bp->ext_phy_config); break; } - bp->phy_addr = local_phy; } else { /* SerDes */ -/* ext_phy_addr = ((bp->ext_phy_config & +/* ext_phy_addr = ((bp->ext_phy_config & PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT); */ @@ -2855,10 +3602,6 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: DP(NETIF_MSG_LINK, "SerDes 5482\n"); - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled external phy int\n"); break; default: @@ -2872,8 +3615,22 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) static void bnx2x_ext_phy_reset(struct bnx2x *bp) { u32 ext_phy_type; - u32 ext_phy_addr; - u32 local_phy; + u32 ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK); + + /* The PHY reset is controled by GPIO 1 + * Give it 1ms of reset pulse + */ + if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) && + (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) { + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + msleep(1); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_HIGH); + } if (bp->phy_flags & PHY_XGXS_FLAG) { ext_phy_type = XGXS_EXT_PHY_TYPE(bp); @@ -2884,15 +3641,24 @@ static void bnx2x_ext_phy_reset(struct bnx2x *bp) case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - DP(NETIF_MSG_LINK, "XGXS 8705/6\n"); - local_phy = bp->phy_addr; - ext_phy_addr = ((bp->ext_phy_config & - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - bp->phy_addr = (u8)ext_phy_addr; - bnx2x_mdio45_write(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + DP(NETIF_MSG_LINK, "XGXS 8705/8706\n"); + bnx2x_mdio45_write(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_CNTL, 0xa040); - bp->phy_addr = local_phy; + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + DP(NETIF_MSG_LINK, "XGXS 8072\n"); + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0, 1<<15); + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + DP(NETIF_MSG_LINK, "XGXS SFX7101\n"); break; default: @@ -2931,6 +3697,7 @@ static void bnx2x_link_initialize(struct bnx2x *bp) NIG_MASK_SERDES0_LINK_STATUS | NIG_MASK_MI_INT)); + /* Activate the external PHY */ bnx2x_ext_phy_reset(bp); bnx2x_set_aer_mmd(bp); @@ -3011,11 +3778,11 @@ static void bnx2x_link_initialize(struct bnx2x *bp) bnx2x_initialize_sgmii_process(bp); } - /* enable the interrupt */ - bnx2x_link_int_enable(bp); - /* init ext phy and enable link state int */ bnx2x_ext_phy_init(bp); + + /* enable the interrupt */ + bnx2x_link_int_enable(bp); } static void bnx2x_phy_deassert(struct bnx2x *bp) @@ -3074,6 +3841,11 @@ static int bnx2x_phy_init(struct bnx2x *bp) static void bnx2x_link_reset(struct bnx2x *bp) { int port = bp->port; + u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK); + + /* update shared memory */ + bp->link_status = 0; + bnx2x_update_mng(bp); /* disable attentions */ bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, @@ -3082,21 +3854,45 @@ static void bnx2x_link_reset(struct bnx2x *bp) NIG_MASK_SERDES0_LINK_STATUS | NIG_MASK_MI_INT)); - bnx2x_ext_phy_reset(bp); + /* activate nig drain */ + NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + + /* disable nig egress interface */ + NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0); + NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); + + /* Stop BigMac rx */ + bnx2x_bmac_rx_disable(bp); + + /* disable emac */ + NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0); + + msleep(10); + + /* The PHY reset is controled by GPIO 1 + * Hold it as output low + */ + if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) && + (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) { + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + DP(NETIF_MSG_LINK, "reset external PHY\n"); + } /* reset the SerDes/XGXS */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, (0x1ff << (port*16))); - /* reset EMAC / BMAC and disable NIG interfaces */ - NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0); - NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0); + /* reset BigMac */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0); + /* disable nig ingress interface */ + NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0); NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0); - NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); - NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + /* set link down */ + bp->link_up = 0; } #ifdef BNX2X_XGXS_LB @@ -3177,6 +3973,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, bnx2x_panic(); return -EBUSY; } + /* CID needs port number to be encoded int it */ bp->spq_prod_bd->hdr.conn_and_cmd_data = cpu_to_le32(((command << SPE_HDR_CMD_ID_SHIFT) | @@ -4335,7 +5132,7 @@ static void bnx2x_timer(unsigned long data) return; if (atomic_read(&bp->intr_sem) != 0) - goto bnx2x_restart_timer; + goto timer_restart; if (poll) { struct bnx2x_fastpath *fp = &bp->fp[0]; @@ -4345,7 +5142,7 @@ static void bnx2x_timer(unsigned long data) rc = bnx2x_rx_int(fp, 1000); } - if (!nomcp && (bp->bc_ver >= 0x040003)) { + if (!nomcp) { int port = bp->port; u32 drv_pulse; u32 mcp_pulse; @@ -4354,9 +5151,9 @@ static void bnx2x_timer(unsigned long data) bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK; /* TBD - add SYSTEM_TIME */ drv_pulse = bp->fw_drv_pulse_wr_seq; - SHMEM_WR(bp, drv_fw_mb[port].drv_pulse_mb, drv_pulse); + SHMEM_WR(bp, func_mb[port].drv_pulse_mb, drv_pulse); - mcp_pulse = (SHMEM_RD(bp, drv_fw_mb[port].mcp_pulse_mb) & + mcp_pulse = (SHMEM_RD(bp, func_mb[port].mcp_pulse_mb) & MCP_PULSE_SEQ_MASK); /* The delta between driver pulse and mcp response * should be 1 (before mcp response) or 0 (after mcp response) @@ -4370,11 +5167,11 @@ static void bnx2x_timer(unsigned long data) } if (bp->stats_state == STATS_STATE_DISABLE) - goto bnx2x_restart_timer; + goto timer_restart; bnx2x_update_stats(bp); -bnx2x_restart_timer: +timer_restart: mod_timer(&bp->timer, jiffies + bp->current_interval); } @@ -5266,8 +6063,10 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) if (mode & 0x1) { /* init common */ DP(BNX2X_MSG_MCP, "starting common init func %d mode %x\n", func, mode); - REG_WR(bp, MISC_REG_RESET_REG_1, 0xffffffff); - REG_WR(bp, MISC_REG_RESET_REG_2, 0xfffc); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + 0xffffffff); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + 0xfffc); bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END); REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x100); @@ -5487,6 +6286,28 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) enable_blocks_attention(bp); /* enable_blocks_parity(bp); */ + switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: + /* Fan failure is indicated by SPIO 5 */ + bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5, + MISC_REGISTERS_SPIO_INPUT_HI_Z); + + /* set to active low mode */ + val = REG_RD(bp, MISC_REG_SPIO_INT); + val |= ((1 << MISC_REGISTERS_SPIO_5) << + MISC_REGISTERS_SPIO_INT_OLD_SET_POS); + REG_WR(bp, MISC_REG_SPIO_INT, val); + + /* enable interrupt to signal the IGU */ + val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); + val |= (1 << MISC_REGISTERS_SPIO_5); + REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val); + break; + + default: + break; + } + } /* end of common init */ /* per port init */ @@ -5646,6 +6467,18 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) /* Port MCP comes here */ /* Port DMAE comes here */ + switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: + /* add SPIO 5 to group 0 */ + val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + val |= AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, val); + break; + + default: + break; + } + bnx2x_link_reset(bp); /* Reset PCIE errors for debug */ @@ -5670,9 +6503,9 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) port = bp->port; bp->fw_drv_pulse_wr_seq = - (SHMEM_RD(bp, drv_fw_mb[port].drv_pulse_mb) & + (SHMEM_RD(bp, func_mb[port].drv_pulse_mb) & DRV_PULSE_SEQ_MASK); - bp->fw_mb = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_param); + bp->fw_mb = SHMEM_RD(bp, func_mb[port].fw_mb_param); DP(BNX2X_MSG_MCP, "drv_pulse 0x%x fw_mb 0x%x\n", bp->fw_drv_pulse_wr_seq, bp->fw_mb); } else { @@ -5685,12 +6518,12 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) /* send the MCP a request, block until there is a reply */ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command) { - u32 rc = 0; - u32 seq = ++bp->fw_seq; int port = bp->port; + u32 seq = ++bp->fw_seq; + u32 rc = 0; - SHMEM_WR(bp, drv_fw_mb[port].drv_mb_header, command|seq); - DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", command|seq); + SHMEM_WR(bp, func_mb[port].drv_mb_header, (command | seq)); + DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq)); /* let the FW do it's magic ... */ msleep(100); /* TBD */ @@ -5698,19 +6531,20 @@ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command) if (CHIP_REV_IS_SLOW(bp)) msleep(900); - rc = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_header); - + rc = SHMEM_RD(bp, func_mb[port].fw_mb_header); DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq); /* is this a reply to our command? */ if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) { rc &= FW_MSG_CODE_MASK; + } else { /* FW BUG! */ BNX2X_ERR("FW failed to respond!\n"); bnx2x_fw_dump(bp); rc = 0; } + return rc; } @@ -6559,7 +7393,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | - SUPPORTED_2500baseT_Full | + SUPPORTED_2500baseX_Full | SUPPORTED_TP | SUPPORTED_FIBRE | SUPPORTED_Autoneg | SUPPORTED_Pause | @@ -6572,10 +7406,10 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) bp->phy_flags |= PHY_SGMII_FLAG; - bp->supported |= (/* SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full |*/ + bp->supported |= (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | SUPPORTED_TP | SUPPORTED_FIBRE | SUPPORTED_Autoneg | @@ -6611,7 +7445,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | - SUPPORTED_2500baseT_Full | + SUPPORTED_2500baseX_Full | SUPPORTED_10000baseT_Full | SUPPORTED_TP | SUPPORTED_FIBRE | SUPPORTED_Autoneg | @@ -6620,12 +7454,46 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n", + ext_phy_type); + + bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - BNX2X_DEV_INFO("ext_phy_type 0x%x (8705/6)\n", + BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n", + ext_phy_type); + + bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n", ext_phy_type); bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n", + ext_phy_type); + + bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | SUPPORTED_Pause | SUPPORTED_Asym_Pause); break; @@ -6682,7 +7550,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) SUPPORTED_1000baseT_Full); if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) - bp->supported &= ~SUPPORTED_2500baseT_Full; + bp->supported &= ~SUPPORTED_2500baseX_Full; if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) bp->supported &= ~SUPPORTED_10000baseT_Full; @@ -6702,13 +7570,8 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) bp->req_line_speed = 0; bp->advertising = bp->supported; } else { - u32 ext_phy_type; - - ext_phy_type = XGXS_EXT_PHY_TYPE(bp); - if ((ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) || - (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) { + if (XGXS_EXT_PHY_TYPE(bp) == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) { /* force 10G, no AN */ bp->req_line_speed = SPEED_10000; bp->advertising = @@ -6725,8 +7588,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_10M_FULL: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) { + if (bp->supported & SUPPORTED_10baseT_Full) { bp->req_line_speed = SPEED_10; bp->advertising = (ADVERTISED_10baseT_Full | ADVERTISED_TP); @@ -6740,8 +7602,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_10M_HALF: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) { + if (bp->supported & SUPPORTED_10baseT_Half) { bp->req_line_speed = SPEED_10; bp->req_duplex = DUPLEX_HALF; bp->advertising = (ADVERTISED_10baseT_Half | @@ -6756,8 +7617,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_100M_FULL: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + if (bp->supported & SUPPORTED_100baseT_Full) { bp->req_line_speed = SPEED_100; bp->advertising = (ADVERTISED_100baseT_Full | ADVERTISED_TP); @@ -6771,8 +7631,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_100M_HALF: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + if (bp->supported & SUPPORTED_100baseT_Half) { bp->req_line_speed = SPEED_100; bp->req_duplex = DUPLEX_HALF; bp->advertising = (ADVERTISED_100baseT_Half | @@ -6787,8 +7646,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_1G: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) { + if (bp->supported & SUPPORTED_1000baseT_Full) { bp->req_line_speed = SPEED_1000; bp->advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_TP); @@ -6802,10 +7660,9 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_2_5G: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) { + if (bp->supported & SUPPORTED_2500baseX_Full) { bp->req_line_speed = SPEED_2500; - bp->advertising = (ADVERTISED_2500baseT_Full | + bp->advertising = (ADVERTISED_2500baseX_Full | ADVERTISED_TP); } else { BNX2X_ERR("NVRAM config error. " @@ -6819,15 +7676,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) case PORT_FEATURE_LINK_SPEED_10G_CX4: case PORT_FEATURE_LINK_SPEED_10G_KX4: case PORT_FEATURE_LINK_SPEED_10G_KR: - if (!(bp->phy_flags & PHY_XGXS_FLAG)) { - BNX2X_ERR("NVRAM config error. " - "Invalid link_config 0x%x" - " phy_flags 0x%x\n", - bp->link_config, bp->phy_flags); - return; - } - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) { + if (bp->supported & SUPPORTED_10000baseT_Full) { bp->req_line_speed = SPEED_10000; bp->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); @@ -6854,43 +7703,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) bp->req_flow_ctrl = (bp->link_config & PORT_FEATURE_FLOW_CONTROL_MASK); - /* Please refer to Table 28B-3 of the 802.3ab-1999 spec */ - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: + if ((bp->req_flow_ctrl == FLOW_CTRL_AUTO) && + (bp->supported & SUPPORTED_Autoneg)) bp->req_autoneg |= AUTONEG_FLOW_CTRL; - if (bp->dev->mtu <= 4500) { - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - } else { - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - } - break; - - case FLOW_CTRL_TX: - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - break; - - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - case FLOW_CTRL_NONE: - default: - bp->pause_mode = PAUSE_NONE; - bp->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - } - BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x\n" - KERN_INFO " pause_mode %d advertising 0x%x\n", - bp->req_autoneg, bp->req_flow_ctrl, - bp->pause_mode, bp->advertising); + BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x" + " advertising 0x%x\n", + bp->req_autoneg, bp->req_flow_ctrl, bp->advertising); } static void bnx2x_get_hwinfo(struct bnx2x *bp) @@ -6923,16 +7742,16 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) val = SHMEM_RD(bp, validity_map[port]); if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) - != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) - BNX2X_ERR("MCP validity signature bad\n"); + != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) + BNX2X_ERR("BAD MCP validity signature\n"); - bp->fw_seq = (SHMEM_RD(bp, drv_fw_mb[port].drv_mb_header) & + bp->fw_seq = (SHMEM_RD(bp, func_mb[port].drv_mb_header) & DRV_MSG_SEQ_NUMBER_MASK); bp->hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config); - + bp->board = SHMEM_RD(bp, dev_info.shared_hw_config.board); bp->serdes_config = - SHMEM_RD(bp, dev_info.port_hw_config[bp->port].serdes_config); + SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config); bp->lane_config = SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config); bp->ext_phy_config = @@ -6945,13 +7764,13 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) bp->link_config = SHMEM_RD(bp, dev_info.port_feature_config[port].link_config); - BNX2X_DEV_INFO("hw_config (%08x) serdes_config (%08x)\n" + BNX2X_DEV_INFO("hw_config (%08x) board (%08x) serdes_config (%08x)\n" KERN_INFO " lane_config (%08x) ext_phy_config (%08x)\n" KERN_INFO " speed_cap_mask (%08x) link_config (%08x)" " fw_seq (%08x)\n", - bp->hw_config, bp->serdes_config, bp->lane_config, - bp->ext_phy_config, bp->speed_cap_mask, - bp->link_config, bp->fw_seq); + bp->hw_config, bp->board, bp->serdes_config, + bp->lane_config, bp->ext_phy_config, + bp->speed_cap_mask, bp->link_config, bp->fw_seq); switch_cfg = (bp->link_config & PORT_FEATURE_CONNECTED_SWITCH_MASK); bnx2x_link_settings_supported(bp, switch_cfg); @@ -7005,14 +7824,8 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) return; set_mac: /* only supposed to happen on emulation/FPGA */ - BNX2X_ERR("warning constant MAC workaround active\n"); - bp->dev->dev_addr[0] = 0; - bp->dev->dev_addr[1] = 0x50; - bp->dev->dev_addr[2] = 0xc2; - bp->dev->dev_addr[3] = 0x2c; - bp->dev->dev_addr[4] = 0x71; - bp->dev->dev_addr[5] = port ? 0x0d : 0x0e; - + BNX2X_ERR("warning rendom MAC workaround active\n"); + random_ether_addr(bp->dev->dev_addr); memcpy(bp->dev->perm_addr, bp->dev->dev_addr, 6); } @@ -7039,19 +7852,34 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) } if (bp->phy_flags & PHY_XGXS_FLAG) { - cmd->port = PORT_FIBRE; - } else { + u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp); + + switch (ext_phy_type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + cmd->port = PORT_FIBRE; + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + cmd->port = PORT_TP; + break; + + default: + DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", + bp->ext_phy_config); + } + } else cmd->port = PORT_TP; - } cmd->phy_address = bp->phy_addr; cmd->transceiver = XCVR_INTERNAL; - if (bp->req_autoneg & AUTONEG_SPEED) { + if (bp->req_autoneg & AUTONEG_SPEED) cmd->autoneg = AUTONEG_ENABLE; - } else { + else cmd->autoneg = AUTONEG_DISABLE; - } cmd->maxtxpkt = 0; cmd->maxrxpkt = 0; @@ -7082,8 +7910,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) switch (cmd->port) { case PORT_TP: - if (!(bp->supported & SUPPORTED_TP)) + if (!(bp->supported & SUPPORTED_TP)) { + DP(NETIF_MSG_LINK, "TP not supported\n"); return -EINVAL; + } if (bp->phy_flags & PHY_XGXS_FLAG) { bnx2x_link_reset(bp); @@ -7093,8 +7923,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) break; case PORT_FIBRE: - if (!(bp->supported & SUPPORTED_FIBRE)) + if (!(bp->supported & SUPPORTED_FIBRE)) { + DP(NETIF_MSG_LINK, "FIBRE not supported\n"); return -EINVAL; + } if (!(bp->phy_flags & PHY_XGXS_FLAG)) { bnx2x_link_reset(bp); @@ -7104,12 +7936,15 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) break; default: + DP(NETIF_MSG_LINK, "Unknown port type\n"); return -EINVAL; } if (cmd->autoneg == AUTONEG_ENABLE) { - if (!(bp->supported & SUPPORTED_Autoneg)) + if (!(bp->supported & SUPPORTED_Autoneg)) { + DP(NETIF_MSG_LINK, "Aotoneg not supported\n"); return -EINVAL; + } /* advertise the requested speed and duplex if supported */ cmd->advertising &= bp->supported; @@ -7124,14 +7959,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) switch (cmd->speed) { case SPEED_10: if (cmd->duplex == DUPLEX_FULL) { - if (!(bp->supported & SUPPORTED_10baseT_Full)) + if (!(bp->supported & + SUPPORTED_10baseT_Full)) { + DP(NETIF_MSG_LINK, + "10M full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_10baseT_Full | ADVERTISED_TP); } else { - if (!(bp->supported & SUPPORTED_10baseT_Half)) + if (!(bp->supported & + SUPPORTED_10baseT_Half)) { + DP(NETIF_MSG_LINK, + "10M half not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_10baseT_Half | ADVERTISED_TP); @@ -7141,15 +7984,21 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) case SPEED_100: if (cmd->duplex == DUPLEX_FULL) { if (!(bp->supported & - SUPPORTED_100baseT_Full)) + SUPPORTED_100baseT_Full)) { + DP(NETIF_MSG_LINK, + "100M full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_100baseT_Full | ADVERTISED_TP); } else { if (!(bp->supported & - SUPPORTED_100baseT_Half)) + SUPPORTED_100baseT_Half)) { + DP(NETIF_MSG_LINK, + "100M half not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_100baseT_Half | ADVERTISED_TP); @@ -7157,39 +8006,54 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) break; case SPEED_1000: - if (cmd->duplex != DUPLEX_FULL) + if (cmd->duplex != DUPLEX_FULL) { + DP(NETIF_MSG_LINK, "1G half not supported\n"); return -EINVAL; + } - if (!(bp->supported & SUPPORTED_1000baseT_Full)) + if (!(bp->supported & SUPPORTED_1000baseT_Full)) { + DP(NETIF_MSG_LINK, "1G full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_TP); break; case SPEED_2500: - if (cmd->duplex != DUPLEX_FULL) + if (cmd->duplex != DUPLEX_FULL) { + DP(NETIF_MSG_LINK, + "2.5G half not supported\n"); return -EINVAL; + } - if (!(bp->supported & SUPPORTED_2500baseT_Full)) + if (!(bp->supported & SUPPORTED_2500baseX_Full)) { + DP(NETIF_MSG_LINK, + "2.5G full not supported\n"); return -EINVAL; + } - advertising = (ADVERTISED_2500baseT_Full | + advertising = (ADVERTISED_2500baseX_Full | ADVERTISED_TP); break; case SPEED_10000: - if (cmd->duplex != DUPLEX_FULL) + if (cmd->duplex != DUPLEX_FULL) { + DP(NETIF_MSG_LINK, "10G half not supported\n"); return -EINVAL; + } - if (!(bp->supported & SUPPORTED_10000baseT_Full)) + if (!(bp->supported & SUPPORTED_10000baseT_Full)) { + DP(NETIF_MSG_LINK, "10G full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); break; default: + DP(NETIF_MSG_LINK, "Unsupported speed\n"); return -EINVAL; } @@ -7389,8 +8253,7 @@ static void bnx2x_disable_nvram_access(struct bnx2x *bp) static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, u32 *ret_val, u32 cmd_flags) { - int rc; - int count, i; + int count, i, rc; u32 val; /* build the command word */ @@ -7510,8 +8373,7 @@ static int bnx2x_get_eeprom(struct net_device *dev, static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val, u32 cmd_flags) { - int rc; - int count, i; + int count, i, rc; /* build the command word */ cmd_flags |= MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR; @@ -7548,7 +8410,7 @@ static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val, return rc; } -#define BYTE_OFFSET(offset) (8 * (offset & 0x03)) +#define BYTE_OFFSET(offset) (8 * (offset & 0x03)) static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf, int buf_size) @@ -7779,52 +8641,29 @@ static int bnx2x_set_pauseparam(struct net_device *dev, DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n", epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause); - bp->req_flow_ctrl = FLOW_CTRL_AUTO; if (epause->autoneg) { - bp->req_autoneg |= AUTONEG_FLOW_CTRL; - if (bp->dev->mtu <= 4500) { - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - } else { - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; + if (!(bp->supported & SUPPORTED_Autoneg)) { + DP(NETIF_MSG_LINK, "Aotoneg not supported\n"); + return -EINVAL; } - } else { + bp->req_autoneg |= AUTONEG_FLOW_CTRL; + } else bp->req_autoneg &= ~AUTONEG_FLOW_CTRL; - if (epause->rx_pause) - bp->req_flow_ctrl |= FLOW_CTRL_RX; - if (epause->tx_pause) - bp->req_flow_ctrl |= FLOW_CTRL_TX; - - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - bp->req_flow_ctrl = FLOW_CTRL_NONE; - bp->pause_mode = PAUSE_NONE; - bp->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; + bp->req_flow_ctrl = FLOW_CTRL_AUTO; - case FLOW_CTRL_TX: - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - break; + if (epause->rx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_RX; + if (epause->tx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_TX; - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - } - } + if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) && + (bp->req_flow_ctrl == FLOW_CTRL_AUTO)) + bp->req_flow_ctrl = FLOW_CTRL_NONE; - DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n" - DP_LEVEL " pause_mode %d advertising 0x%x\n", - bp->req_autoneg, bp->req_flow_ctrl, bp->pause_mode, - bp->advertising); + DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n", + bp->req_autoneg, bp->req_flow_ctrl); bnx2x_stop_stats(bp); bnx2x_link_initialize(bp); diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index ea9100855c5c..dc423e58dad8 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -24,6 +24,8 @@ #define BNX2X_MSG_STATS 0x20000 /* was: NETIF_MSG_TIMER */ #define NETIF_MSG_NVM 0x40000 /* was: NETIF_MSG_HW */ #define NETIF_MSG_DMAE 0x80000 /* was: NETIF_MSG_HW */ +#define BNX2X_MSG_SP 0x100000 /* was: NETIF_MSG_INTR */ +#define BNX2X_MSG_FP 0x200000 /* was: NETIF_MSG_INTR */ #define DP_LEVEL KERN_NOTICE /* was: KERN_DEBUG */ @@ -40,6 +42,12 @@ __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \ } while (0) +/* for logging (never masked) */ +#define BNX2X_LOG(__fmt, __args...) do { \ + printk(KERN_NOTICE "[%s:%d(%s)]" __fmt, __FUNCTION__, \ + __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \ + } while (0) + /* before we have a dev->name use dev_info() */ #define BNX2X_DEV_INFO(__fmt, __args...) do { \ if (bp->msglevel & NETIF_MSG_PROBE) \ @@ -574,7 +582,8 @@ struct bnx2x { u32 fw_mb; u32 hw_config; - u32 serdes_config; + u32 board; + u32 serdes_config; u32 lane_config; u32 ext_phy_config; #define XGXS_EXT_PHY_TYPE(bp) (bp->ext_phy_config & \ @@ -595,11 +604,11 @@ struct bnx2x { u8 tx_lane_swap; u8 link_up; + u8 phy_link_up; u32 supported; /* link settings - missing defines */ #define SUPPORTED_2500baseT_Full (1 << 15) -#define SUPPORTED_CX4 (1 << 16) u32 phy_flags; /*#define PHY_SERDES_FLAG 0x1*/ @@ -644,16 +653,9 @@ struct bnx2x { #define FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH #define FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE - u32 pause_mode; -#define PAUSE_NONE 0 -#define PAUSE_SYMMETRIC 1 -#define PAUSE_ASYMMETRIC 2 -#define PAUSE_BOTH 3 - u32 advertising; /* link settings - missing defines */ #define ADVERTISED_2500baseT_Full (1 << 15) -#define ADVERTISED_CX4 (1 << 16) u32 link_status; u32 line_speed; @@ -667,6 +669,8 @@ struct bnx2x { #define NVRAM_TIMEOUT_COUNT 30000 #define NVRAM_PAGE_SIZE 256 + u8 wol; + int rx_ring_size; u16 tx_quick_cons_trip_int; @@ -718,9 +722,6 @@ struct bnx2x { #endif char *name; - u16 bus_speed_mhz; - u8 wol; - u8 pad; /* used to synchronize stats collecting */ int stats_state; @@ -873,6 +874,7 @@ struct bnx2x { #define PCICFG_LINK_SPEED 0xf0000 #define PCICFG_LINK_SPEED_SHIFT 16 +#define BMAC_CONTROL_RX_ENABLE 2 /* stuff added to make the code fit 80Col */ #define TPA_TYPE_START ETH_FAST_PATH_RX_CQE_START_FLG @@ -944,13 +946,13 @@ struct bnx2x { #define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD #define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD -#define NIG_STATUS_INTERRUPT_XGXS0_LINK10G \ +#define NIG_STATUS_XGXS0_LINK10G \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G -#define NIG_XGXS0_LINK_STATUS \ +#define NIG_STATUS_XGXS0_LINK_STATUS \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS -#define NIG_XGXS0_LINK_STATUS_SIZE \ +#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE -#define NIG_SERDES0_LINK_STATUS \ +#define NIG_STATUS_SERDES0_LINK_STATUS \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS #define NIG_MASK_MI_INT \ NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h index 62a6eb81025a..3b968904ca65 100644 --- a/drivers/net/bnx2x_fw_defs.h +++ b/drivers/net/bnx2x_fw_defs.h @@ -1,6 +1,6 @@ /* bnx2x_fw_defs.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h index 6fd959c34d1f..b21075ccb52e 100644 --- a/drivers/net/bnx2x_hsi.h +++ b/drivers/net/bnx2x_hsi.h @@ -1,6 +1,6 @@ /* bnx2x_hsi.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -8,169 +8,9 @@ */ -#define FUNC_0 0 -#define FUNC_1 1 -#define FUNC_MAX 2 - - -/* This value (in milliseconds) determines the frequency of the driver - * issuing the PULSE message code. The firmware monitors this periodic - * pulse to determine when to switch to an OS-absent mode. */ -#define DRV_PULSE_PERIOD_MS 250 - -/* This value (in milliseconds) determines how long the driver should - * wait for an acknowledgement from the firmware before timing out. Once - * the firmware has timed out, the driver will assume there is no firmware - * running and there won't be any firmware-driver synchronization during a - * driver reset. */ -#define FW_ACK_TIME_OUT_MS 5000 - -#define FW_ACK_POLL_TIME_MS 1 - -#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS) - -/* LED Blink rate that will achieve ~15.9Hz */ -#define LED_BLINK_RATE_VAL 480 - -/**************************************************************************** - * Driver <-> FW Mailbox * - ****************************************************************************/ -struct drv_fw_mb { - u32 drv_mb_header; -#define DRV_MSG_CODE_MASK 0xffff0000 -#define DRV_MSG_CODE_LOAD_REQ 0x10000000 -#define DRV_MSG_CODE_LOAD_DONE 0x11000000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000 -#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000 -#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000 -#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000 -#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000 -#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000 -#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000 -#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 -#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 - -#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff - - u32 drv_mb_param; - - u32 fw_mb_header; -#define FW_MSG_CODE_MASK 0xffff0000 -#define FW_MSG_CODE_DRV_LOAD_COMMON 0x11000000 -#define FW_MSG_CODE_DRV_LOAD_PORT 0x12000000 -#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x13000000 -#define FW_MSG_CODE_DRV_LOAD_DONE 0x14000000 -#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x21000000 -#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x22000000 -#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x23000000 -#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50000000 -#define FW_MSG_CODE_DIAG_REFUSE 0x51000000 -#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70000000 -#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x71000000 -#define FW_MSG_CODE_GET_KEY_DONE 0x80000000 -#define FW_MSG_CODE_NO_KEY 0x8f000000 -#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x8f800000 -#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90000000 -#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x91000000 -#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x92000000 -#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x93000000 -#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x94000000 - -#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff - - u32 fw_mb_param; - - u32 link_status; - /* Driver should update this field on any link change event */ - -#define LINK_STATUS_LINK_FLAG_MASK 0x00000001 -#define LINK_STATUS_LINK_UP 0x00000001 -#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E -#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1) - -#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020 -#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020 - -#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040 -#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080 -#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080 - -#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200 -#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400 -#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800 -#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000 -#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000 -#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000 -#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000 - -#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000 -#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000 - -#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000 -#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000 - -#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000 -#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18) -#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18) -#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18) -#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18) - -#define LINK_STATUS_SERDES_LINK 0x00100000 - -#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000 -#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000 -#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000 -#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000 -#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000 -#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000 -#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000 -#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000 - - u32 drv_pulse_mb; -#define DRV_PULSE_SEQ_MASK 0x00007fff -#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000 - /* The system time is in the format of - * (year-2001)*12*32 + month*32 + day. */ -#define DRV_PULSE_ALWAYS_ALIVE 0x00008000 - /* Indicate to the firmware not to go into the - * OS-absent when it is not getting driver pulse. - * This is used for debugging as well for PXE(MBA). */ - - u32 mcp_pulse_mb; -#define MCP_PULSE_SEQ_MASK 0x00007fff -#define MCP_PULSE_ALWAYS_ALIVE 0x00008000 - /* Indicates to the driver not to assert due to lack - * of MCP response */ -#define MCP_EVENT_MASK 0xffff0000 -#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000 - -}; - +#define PORT_0 0 +#define PORT_1 1 +#define PORT_MAX 2 /**************************************************************************** * Shared HW configuration * @@ -249,7 +89,7 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_SMBUS_TIMING_100KHZ 0x00000000 #define SHARED_HW_CFG_SMBUS_TIMING_400KHZ 0x00001000 -#define SHARED_HW_CFG_HIDE_FUNC1 0x00002000 +#define SHARED_HW_CFG_HIDE_PORT1 0x00002000 u32 power_dissipated; /* 0x11c */ #define SHARED_HW_CFG_POWER_DIS_CMN_MASK 0xff000000 @@ -290,6 +130,8 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1015G 0x00000006 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1020G 0x00000007 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G 0x00000008 +#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G 0x00000009 +#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G 0x0000000a #define SHARED_HW_CFG_BOARD_VER_MASK 0xffff0000 #define SHARED_HW_CFG_BOARD_VER_SHIFT 16 @@ -304,13 +146,12 @@ struct shared_hw_cfg { /* NVRAM Offset */ }; + /**************************************************************************** * Port HW configuration * ****************************************************************************/ -struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ +struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ - /* Fields below are port specific (in anticipation of dual port - devices */ u32 pci_id; #define PORT_HW_CFG_PCI_VENDOR_ID_MASK 0xffff0000 #define PORT_HW_CFG_PCI_DEVICE_ID_MASK 0x0000ffff @@ -420,6 +261,8 @@ struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706 0x00000500 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8276 0x00000600 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481 0x00000700 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101 0x00000800 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00 #define PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK 0x000000ff @@ -462,11 +305,13 @@ struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ }; + /**************************************************************************** * Shared Feature configuration * ****************************************************************************/ struct shared_feat_cfg { /* NVRAM Offset */ - u32 bmc_common; /* 0x450 */ + + u32 config; /* 0x450 */ #define SHARED_FEATURE_BMC_ECHO_MODE_EN 0x00000001 }; @@ -475,7 +320,8 @@ struct shared_feat_cfg { /* NVRAM Offset */ /**************************************************************************** * Port Feature configuration * ****************************************************************************/ -struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ +struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */ + u32 config; #define PORT_FEATURE_BAR1_SIZE_MASK 0x0000000f #define PORT_FEATURE_BAR1_SIZE_SHIFT 0 @@ -609,8 +455,7 @@ struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ #define PORT_FEATURE_SMBUS_ADDR_MASK 0x000000fe #define PORT_FEATURE_SMBUS_ADDR_SHIFT 1 - u32 iscsib_boot_cfg; -#define PORT_FEATURE_ISCSIB_SKIP_TARGET_BOOT 0x00000001 + u32 reserved1; u32 link_config; /* Used as HW defaults for the driver */ #define PORT_FEATURE_CONNECTED_SWITCH_MASK 0x03000000 @@ -657,20 +502,201 @@ struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ }; +/***************************************************************************** + * Device Information * + *****************************************************************************/ +struct dev_info { /* size */ + + u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */ + + struct shared_hw_cfg shared_hw_config; /* 40 */ + + struct port_hw_cfg port_hw_config[PORT_MAX]; /* 400*2=800 */ + + struct shared_feat_cfg shared_feature_config; /* 4 */ + + struct port_feat_cfg port_feature_config[PORT_MAX]; /* 116*2=232 */ + +}; + + +#define FUNC_0 0 +#define FUNC_1 1 +#define E1_FUNC_MAX 2 +#define FUNC_MAX E1_FUNC_MAX + + +/* This value (in milliseconds) determines the frequency of the driver + * issuing the PULSE message code. The firmware monitors this periodic + * pulse to determine when to switch to an OS-absent mode. */ +#define DRV_PULSE_PERIOD_MS 250 + +/* This value (in milliseconds) determines how long the driver should + * wait for an acknowledgement from the firmware before timing out. Once + * the firmware has timed out, the driver will assume there is no firmware + * running and there won't be any firmware-driver synchronization during a + * driver reset. */ +#define FW_ACK_TIME_OUT_MS 5000 + +#define FW_ACK_POLL_TIME_MS 1 + +#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS) + +/* LED Blink rate that will achieve ~15.9Hz */ +#define LED_BLINK_RATE_VAL 480 + /**************************************************************************** - * Device Information * + * Driver <-> FW Mailbox * ****************************************************************************/ -struct dev_info { /* size */ +struct drv_port_mb { + + u32 link_status; + /* Driver should update this field on any link change event */ + +#define LINK_STATUS_LINK_FLAG_MASK 0x00000001 +#define LINK_STATUS_LINK_UP 0x00000001 +#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E +#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1) + +#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020 +#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020 + +#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040 +#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080 +#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080 + +#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200 +#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400 +#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800 +#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000 +#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000 +#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000 +#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000 + +#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000 +#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000 + +#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000 +#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000 + +#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000 +#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18) +#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18) +#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18) +#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18) + +#define LINK_STATUS_SERDES_LINK 0x00100000 + +#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000 +#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000 +#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000 +#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000 +#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000 +#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000 +#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000 +#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000 - u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */ + u32 reserved[3]; - struct shared_hw_cfg shared_hw_config; /* 40 */ +}; + + +struct drv_func_mb { + + u32 drv_mb_header; +#define DRV_MSG_CODE_MASK 0xffff0000 +#define DRV_MSG_CODE_LOAD_REQ 0x10000000 +#define DRV_MSG_CODE_LOAD_DONE 0x11000000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000 +#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000 +#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000 +#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000 +#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000 +#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000 +#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000 +#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 +#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 + +#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff + + u32 drv_mb_param; + + u32 fw_mb_header; +#define FW_MSG_CODE_MASK 0xffff0000 +#define FW_MSG_CODE_DRV_LOAD_COMMON 0x10100000 +#define FW_MSG_CODE_DRV_LOAD_PORT 0x10110000 +#define FW_MSG_CODE_DRV_LOAD_FUNCTION 0x10120000 +#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x10200000 +#define FW_MSG_CODE_DRV_LOAD_DONE 0x11100000 +#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x20100000 +#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x20110000 +#define FW_MSG_CODE_DRV_UNLOAD_FUNCTION 0x20120000 +#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x21100000 +#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50100000 +#define FW_MSG_CODE_DIAG_REFUSE 0x50200000 +#define FW_MSG_CODE_DIAG_EXIT_DONE 0x60100000 +#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70100000 +#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x70200000 +#define FW_MSG_CODE_GET_KEY_DONE 0x80100000 +#define FW_MSG_CODE_NO_KEY 0x80f00000 +#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x80f80000 +#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90100000 +#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x90210000 +#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x90220000 +#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x90230000 +#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x90240000 + +#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff + + u32 fw_mb_param; + + u32 drv_pulse_mb; +#define DRV_PULSE_SEQ_MASK 0x00007fff +#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000 + /* The system time is in the format of + * (year-2001)*12*32 + month*32 + day. */ +#define DRV_PULSE_ALWAYS_ALIVE 0x00008000 + /* Indicate to the firmware not to go into the + * OS-absent when it is not getting driver pulse. + * This is used for debugging as well for PXE(MBA). */ - struct port_hw_cfg port_hw_config[FUNC_MAX]; /* 400*2=800 */ + u32 mcp_pulse_mb; +#define MCP_PULSE_SEQ_MASK 0x00007fff +#define MCP_PULSE_ALWAYS_ALIVE 0x00008000 + /* Indicates to the driver not to assert due to lack + * of MCP response */ +#define MCP_EVENT_MASK 0xffff0000 +#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000 - struct shared_feat_cfg shared_feature_config; /* 4 */ + u32 iscsi_boot_signature; + u32 iscsi_boot_block_offset; - struct port_feat_cfg port_feature_config[FUNC_MAX];/* 116*2=232 */ + u32 reserved[3]; }; @@ -678,9 +704,8 @@ struct dev_info { /* size */ /**************************************************************************** * Management firmware state * ****************************************************************************/ -/* Allocate 320 bytes for management firmware: still not known exactly - * how much IMD needs. */ -#define MGMTFW_STATE_WORD_SIZE 80 +/* Allocate 440 bytes for management firmware */ +#define MGMTFW_STATE_WORD_SIZE 110 struct mgmtfw_state { u32 opaque[MGMTFW_STATE_WORD_SIZE]; @@ -691,31 +716,40 @@ struct mgmtfw_state { * Shared Memory Region * ****************************************************************************/ struct shmem_region { /* SharedMem Offset (size) */ - u32 validity_map[FUNC_MAX]; /* 0x0 (4 * 2 = 0x8) */ -#define SHR_MEM_VALIDITY_PCI_CFG 0x00000001 -#define SHR_MEM_VALIDITY_MB 0x00000002 -#define SHR_MEM_VALIDITY_DEV_INFO 0x00000004 + + u32 validity_map[PORT_MAX]; /* 0x0 (4*2 = 0x8) */ +#define SHR_MEM_FORMAT_REV_ID ('A'<<24) +#define SHR_MEM_FORMAT_REV_MASK 0xff000000 + /* validity bits */ +#define SHR_MEM_VALIDITY_PCI_CFG 0x00100000 +#define SHR_MEM_VALIDITY_MB 0x00200000 +#define SHR_MEM_VALIDITY_DEV_INFO 0x00400000 +#define SHR_MEM_VALIDITY_RESERVED 0x00000007 /* One licensing bit should be set */ #define SHR_MEM_VALIDITY_LIC_KEY_IN_EFFECT_MASK 0x00000038 #define SHR_MEM_VALIDITY_LIC_MANUF_KEY_IN_EFFECT 0x00000008 #define SHR_MEM_VALIDITY_LIC_UPGRADE_KEY_IN_EFFECT 0x00000010 #define SHR_MEM_VALIDITY_LIC_NO_KEY_IN_EFFECT 0x00000020 + /* Active MFW */ +#define SHR_MEM_VALIDITY_ACTIVE_MFW_UNKNOWN 0x00000000 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_IPMI 0x00000040 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_UMP 0x00000080 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_NCSI 0x000000c0 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_NONE 0x000001c0 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_MASK 0x000001c0 - struct drv_fw_mb drv_fw_mb[FUNC_MAX]; /* 0x8 (28 * 2 = 0x38) */ - - struct dev_info dev_info; /* 0x40 (0x438) */ + struct dev_info dev_info; /* 0x8 (0x438) */ -#ifdef _LICENSE_H - license_key_t drv_lic_key[FUNC_MAX]; /* 0x478 (52 * 2 = 0x68) */ -#else /* Linux! */ - u8 reserved[52*FUNC_MAX]; -#endif + u8 reserved[52*PORT_MAX]; /* FW information (for internal FW use) */ - u32 fw_info_fio_offset; /* 0x4e0 (0x4) */ - struct mgmtfw_state mgmtfw_state; /* 0x4e4 (0x140) */ + u32 fw_info_fio_offset; /* 0x4a8 (0x4) */ + struct mgmtfw_state mgmtfw_state; /* 0x4ac (0x1b8) */ + + struct drv_port_mb port_mb[PORT_MAX]; /* 0x664 (16*2=0x20) */ + struct drv_func_mb func_mb[FUNC_MAX]; /* 0x684 (44*2=0x58) */ -}; /* 0x624 */ +}; /* 0x6dc */ #define BCM_5710_FW_MAJOR_VERSION 4 diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index 86055297ab02..5a1aa0b55044 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -1,6 +1,6 @@ /* bnx2x_reg.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,6 +24,8 @@ #define BRB1_REG_BRB1_INT_STS 0x6011c /* [RW 4] Parity mask register #0 read/write */ #define BRB1_REG_BRB1_PRTY_MASK 0x60138 +/* [R 4] Parity register #0 read */ +#define BRB1_REG_BRB1_PRTY_STS 0x6012c /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */ @@ -281,6 +283,8 @@ #define CDU_REG_CDU_INT_STS 0x101030 /* [RW 5] Parity mask register #0 read/write */ #define CDU_REG_CDU_PRTY_MASK 0x10104c +/* [R 5] Parity register #0 read */ +#define CDU_REG_CDU_PRTY_STS 0x101040 /* [RC 32] logging of error data in case of a CDU load error: {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error; ype_error; ctual_active; ctual_compressed_context}; */ @@ -308,6 +312,8 @@ #define CFC_REG_CFC_INT_STS_CLR 0x104100 /* [RW 4] Parity mask register #0 read/write */ #define CFC_REG_CFC_PRTY_MASK 0x104118 +/* [R 4] Parity register #0 read */ +#define CFC_REG_CFC_PRTY_STS 0x10410c /* [RW 21] CID cam access (21:1 - Data; alid - 0) */ #define CFC_REG_CID_CAM 0x104800 #define CFC_REG_CONTROL0 0x104028 @@ -354,6 +360,8 @@ #define CSDM_REG_CSDM_INT_MASK_1 0xc22ac /* [RW 11] Parity mask register #0 read/write */ #define CSDM_REG_CSDM_PRTY_MASK 0xc22bc +/* [R 11] Parity register #0 read */ +#define CSDM_REG_CSDM_PRTY_STS 0xc22b0 #define CSDM_REG_ENABLE_IN1 0xc2238 #define CSDM_REG_ENABLE_IN2 0xc223c #define CSDM_REG_ENABLE_OUT1 0xc2240 @@ -438,6 +446,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define CSEM_REG_CSEM_PRTY_MASK_0 0x200130 #define CSEM_REG_CSEM_PRTY_MASK_1 0x200140 +/* [R 32] Parity register #0 read */ +#define CSEM_REG_CSEM_PRTY_STS_0 0x200124 +#define CSEM_REG_CSEM_PRTY_STS_1 0x200134 #define CSEM_REG_ENABLE_IN 0x2000a4 #define CSEM_REG_ENABLE_OUT 0x2000a8 /* [RW 32] This address space contains all registers and memories that are @@ -526,6 +537,8 @@ #define CSEM_REG_TS_9_AS 0x20005c /* [RW 1] Parity mask register #0 read/write */ #define DBG_REG_DBG_PRTY_MASK 0xc0a8 +/* [R 1] Parity register #0 read */ +#define DBG_REG_DBG_PRTY_STS 0xc09c /* [RW 2] debug only: These bits indicate the credit for PCI request type 4 interface; MUST be configured AFTER pci_ext_buffer_strt_addr_lsb/msb are configured */ @@ -543,6 +556,8 @@ #define DMAE_REG_DMAE_INT_MASK 0x102054 /* [RW 4] Parity mask register #0 read/write */ #define DMAE_REG_DMAE_PRTY_MASK 0x102064 +/* [R 4] Parity register #0 read */ +#define DMAE_REG_DMAE_PRTY_STS 0x102058 /* [RW 1] Command 0 go. */ #define DMAE_REG_GO_C0 0x102080 /* [RW 1] Command 1 go. */ @@ -623,6 +638,8 @@ #define DORQ_REG_DORQ_INT_STS_CLR 0x170178 /* [RW 2] Parity mask register #0 read/write */ #define DORQ_REG_DORQ_PRTY_MASK 0x170190 +/* [R 2] Parity register #0 read */ +#define DORQ_REG_DORQ_PRTY_STS 0x170184 /* [RW 8] The address to write the DPM CID to STORM. */ #define DORQ_REG_DPM_CID_ADDR 0x170044 /* [RW 5] The DPM mode CID extraction offset. */ @@ -692,6 +709,8 @@ #define HC_REG_CONFIG_1 0x108004 /* [RW 3] Parity mask register #0 read/write */ #define HC_REG_HC_PRTY_MASK 0x1080a0 +/* [R 3] Parity register #0 read */ +#define HC_REG_HC_PRTY_STS 0x108094 /* [RW 17] status block interrupt mask; one in each bit means unmask; zerow in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1... bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */ @@ -1127,6 +1146,7 @@ #define MISC_REG_AEU_GENERAL_ATTN_17 0xa044 #define MISC_REG_AEU_GENERAL_ATTN_18 0xa048 #define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c +#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028 #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c #define MISC_REG_AEU_GENERAL_ATTN_2 0xa008 #define MISC_REG_AEU_GENERAL_ATTN_20 0xa050 @@ -1135,6 +1155,9 @@ #define MISC_REG_AEU_GENERAL_ATTN_4 0xa010 #define MISC_REG_AEU_GENERAL_ATTN_5 0xa014 #define MISC_REG_AEU_GENERAL_ATTN_6 0xa018 +#define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c +#define MISC_REG_AEU_GENERAL_ATTN_8 0xa020 +#define MISC_REG_AEU_GENERAL_ATTN_9 0xa024 /* [RW 32] first 32b for inverting the input for function 0; for each bit: 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp; @@ -1183,6 +1206,40 @@ starts at 0x0 for the A0 tape-out and increments by one for each all-layer tape-out. */ #define MISC_REG_CHIP_REV 0xa40c +/* [RW 32] The following driver registers(1..6) represent 6 drivers and 32 + clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_1 0xa510 +/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of + these bits is written as a '1'; the corresponding SPIO bit will turn off + it's drivers and become an input. This is the reset state of all GPIO + pins. The read value of these bits will be a '1' if that last command + (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff). + [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written + as a '1'; the corresponding GPIO bit will drive low. The read value of + these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for + this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0; + SET When any of these bits is written as a '1'; the corresponding GPIO + bit will drive high (if it has that capability). The read value of these + bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this + bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0; + RO; These bits indicate the read value of each of the eight GPIO pins. + This is the result value of the pin; not the drive value. Writing these + bits will have not effect. */ +#define MISC_REG_GPIO 0xa490 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any access that does not finish within ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is @@ -1223,6 +1280,8 @@ #define MISC_REG_MISC_INT_MASK 0xa388 /* [RW 1] Parity mask register #0 read/write */ #define MISC_REG_MISC_PRTY_MASK 0xa398 +/* [R 1] Parity register #0 read */ +#define MISC_REG_MISC_PRTY_STS 0xa38c /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911. inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1 divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1 @@ -1264,6 +1323,55 @@ /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is shared with the driver resides */ #define MISC_REG_SHARED_MEM_ADDR 0xa2b4 +/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1'; + the corresponding SPIO bit will turn off it's drivers and become an + input. This is the reset state of all SPIO pins. The read value of these + bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this + bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits + is written as a '1'; the corresponding SPIO bit will drive low. The read + value of these bits will be a '1' if that last command (#SET; #CLR; or +#FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of + these bits is written as a '1'; the corresponding SPIO bit will drive + high (if it has that capability). The read value of these bits will be a + '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET. + (reset value 0). [7-0] VALUE RO; These bits indicate the read value of + each of the eight SPIO pins. This is the result value of the pin; not the + drive value. Writing these bits will have not effect. Each 8 bits field + is divided as follows: [0] VAUX Enable; when pulsed low; enables supply + from VAUX. (This is an output pin only; the FLOAT field is not applicable + for this pin); [1] VAUX Disable; when pulsed low; disables supply form + VAUX. (This is an output pin only; FLOAT field is not applicable for this + pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to + select VAUX supply. (This is an output pin only; it is not controlled by + the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT + field is not applicable for this pin; only the VALUE fields is relevant - + it reflects the output value); [3] reserved; [4] spio_4; [5] spio_5; [6] + Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP + device ID select; read by UMP firmware. */ +#define MISC_REG_SPIO 0xa4fc +/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC. + according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5; + [7:0] reserved */ +#define MISC_REG_SPIO_EVENT_EN 0xa2b8 +/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the + corresponding bit in the #OLD_VALUE register. This will acknowledge an + interrupt on the falling edge of corresponding SPIO input (reset value + 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit + in the #OLD_VALUE register. This will acknowledge an interrupt on the + rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE + RO; These bits indicate the old value of the SPIO input value. When the + ~INT_STATE bit is set; this bit indicates the OLD value of the pin such + that if ~INT_STATE is set and this bit is '0'; then the interrupt is due + to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the + interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE + RO; These bits indicate the current SPIO interrupt state for each SPIO + pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR + command bit is written. This bit is set when the SPIO input does not + match the current value in #OLD_VALUE (reset value 0). */ +#define MISC_REG_SPIO_INT 0xa500 +/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are + loaded; 0-prepare; -unprepare */ +#define MISC_REG_UNPREPARED 0xa424 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0) #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9) #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15) @@ -1392,6 +1500,9 @@ #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044 /* [RW 1] Input enable for RX PBF LP IF */ #define NIG_REG_PBF_LB_IN_EN 0x100b4 +/* [RW 1] Value of this register will be transmitted to port swap when + ~nig_registers_strap_override.strap_override =1 */ +#define NIG_REG_PORT_SWAP 0x10394 /* [RW 1] output enable for RX parser descriptor IF */ #define NIG_REG_PRS_EOP_OUT_EN 0x10104 /* [RW 1] Input enable for RX parser request IF */ @@ -1410,6 +1521,10 @@ #define NIG_REG_STAT2_BRB_OCTET 0x107e0 #define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328 #define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c +/* [RW 1] port swap mux selection. If this register equal to 0 then port + swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then + ort swap is equal to ~nig_registers_port_swap.port_swap */ +#define NIG_REG_STRAP_OVERRIDE 0x10398 /* [RW 1] output enable for RX_XCM0 IF */ #define NIG_REG_XCM0_OUT_EN 0x100f0 /* [RW 1] output enable for RX_XCM1 IF */ @@ -1499,6 +1614,8 @@ #define PB_REG_PB_INT_STS 0x1c /* [RW 4] Parity mask register #0 read/write */ #define PB_REG_PB_PRTY_MASK 0x38 +/* [R 4] Parity register #0 read */ +#define PB_REG_PB_PRTY_STS 0x2c #define PRS_REG_A_PRSU_20 0x40134 /* [R 8] debug only: CFC load request current credit. Transaction based. */ #define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164 @@ -1590,6 +1707,8 @@ #define PRS_REG_PRS_INT_STS 0x40188 /* [RW 8] Parity mask register #0 read/write */ #define PRS_REG_PRS_PRTY_MASK 0x401a4 +/* [R 8] Parity register #0 read */ +#define PRS_REG_PRS_PRTY_STS 0x40198 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load request message */ #define PRS_REG_PURE_REGIONS 0x40024 @@ -1718,6 +1837,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define PXP2_REG_PXP2_PRTY_MASK_0 0x120588 #define PXP2_REG_PXP2_PRTY_MASK_1 0x120598 +/* [R 32] Parity register #0 read */ +#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c +#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c /* [R 1] Debug only: The 'almost full' indication from each fifo (gives indication about backpressure) */ #define PXP2_REG_RD_ALMOST_FULL_0 0x120424 @@ -1911,6 +2033,8 @@ #define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8 /* [WB 53] Onchip address table */ #define PXP2_REG_RQ_ONCHIP_AT 0x122000 +/* [RW 13] Pending read limiter threshold; in Dwords */ +#define PXP2_REG_RQ_PDR_LIMIT 0x12033c /* [RW 2] Endian mode for qm */ #define PXP2_REG_RQ_QM_ENDIAN_M 0x120194 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k; @@ -1921,6 +2045,9 @@ /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B; 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ #define PXP2_REG_RQ_RD_MBS0 0x120160 +/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B; + 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ +#define PXP2_REG_RQ_RD_MBS1 0x120168 /* [RW 2] Endian mode for src */ #define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k; @@ -2000,10 +2127,17 @@ /* [RW 3] Max burst size filed for write requests port 0; 000 - 128B; 001:256B; 010: 512B; */ #define PXP2_REG_RQ_WR_MBS0 0x12015c +/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B; + 001:256B; 010: 512B; */ +#define PXP2_REG_RQ_WR_MBS1 0x120164 /* [RW 10] if Number of entries in dmae fifo will be higer than this threshold then has_payload indication will be asserted; the default value should be equal to > write MBS size! */ #define PXP2_REG_WR_DMAE_TH 0x120368 +/* [RW 10] if Number of entries in usdmdp fifo will be higer than this + threshold then has_payload indication will be asserted; the default value + should be equal to > write MBS size! */ +#define PXP2_REG_WR_USDMDP_TH 0x120348 /* [R 1] debug only: Indication if PSWHST arbiter is idle */ #define PXP_REG_HST_ARB_IS_IDLE 0x103004 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means @@ -2021,6 +2155,8 @@ #define PXP_REG_PXP_INT_STS_CLR_0 0x10306c /* [RW 26] Parity mask register #0 read/write */ #define PXP_REG_PXP_PRTY_MASK 0x103094 +/* [R 26] Parity register #0 read */ +#define PXP_REG_PXP_PRTY_STS 0x103088 /* [RW 4] The activity counter initial increment value sent in the load request */ #define QM_REG_ACTCTRINITVAL_0 0x168040 @@ -2127,6 +2263,8 @@ #define QM_REG_QM_INT_STS 0x168438 /* [RW 9] Parity mask register #0 read/write */ #define QM_REG_QM_PRTY_MASK 0x168454 +/* [R 9] Parity register #0 read */ +#define QM_REG_QM_PRTY_STS 0x168448 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */ #define QM_REG_QSTATUS_HIGH 0x16802c /* [R 32] Current queues in pipeline: Queues from 0 to 31 */ @@ -2410,6 +2548,8 @@ #define SRC_REG_SRC_INT_STS 0x404ac /* [RW 3] Parity mask register #0 read/write */ #define SRC_REG_SRC_PRTY_MASK 0x404c8 +/* [R 3] Parity register #0 read */ +#define SRC_REG_SRC_PRTY_STS 0x404bc /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */ #define TCM_REG_CAM_OCCUP 0x5017c /* [RW 1] CDU AG read Interface enable. If 0 - the request input is @@ -2730,6 +2870,8 @@ #define TSDM_REG_TSDM_INT_MASK_1 0x422ac /* [RW 11] Parity mask register #0 read/write */ #define TSDM_REG_TSDM_PRTY_MASK 0x422bc +/* [R 11] Parity register #0 read */ +#define TSDM_REG_TSDM_PRTY_STS 0x422b0 /* [RW 5] The number of time_slots in the arbitration cycle */ #define TSEM_REG_ARB_CYCLE_SIZE 0x180034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -2854,6 +2996,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define TSEM_REG_TSEM_PRTY_MASK_0 0x180120 #define TSEM_REG_TSEM_PRTY_MASK_1 0x180130 +/* [R 32] Parity register #0 read */ +#define TSEM_REG_TSEM_PRTY_STS_0 0x180114 +#define TSEM_REG_TSEM_PRTY_STS_1 0x180124 /* [R 5] Used to read the XX protection CAM occupancy counter. */ #define UCM_REG_CAM_OCCUP 0xe0170 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is @@ -3155,6 +3300,8 @@ #define USDM_REG_USDM_INT_MASK_1 0xc42b0 /* [RW 11] Parity mask register #0 read/write */ #define USDM_REG_USDM_PRTY_MASK 0xc42c0 +/* [R 11] Parity register #0 read */ +#define USDM_REG_USDM_PRTY_STS 0xc42b4 /* [RW 5] The number of time_slots in the arbitration cycle */ #define USEM_REG_ARB_CYCLE_SIZE 0x300034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -3279,6 +3426,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define USEM_REG_USEM_PRTY_MASK_0 0x300130 #define USEM_REG_USEM_PRTY_MASK_1 0x300140 +/* [R 32] Parity register #0 read */ +#define USEM_REG_USEM_PRTY_STS_0 0x300124 +#define USEM_REG_USEM_PRTY_STS_1 0x300134 /* [RW 2] The queue index for registration on Aux1 counter flag. */ #define XCM_REG_AUX1_Q 0x20134 /* [RW 2] Per each decision rule the queue index to register to. */ @@ -3684,6 +3834,8 @@ #define XSDM_REG_XSDM_INT_MASK_1 0x1662ac /* [RW 11] Parity mask register #0 read/write */ #define XSDM_REG_XSDM_PRTY_MASK 0x1662bc +/* [R 11] Parity register #0 read */ +#define XSDM_REG_XSDM_PRTY_STS 0x1662b0 /* [RW 5] The number of time_slots in the arbitration cycle */ #define XSEM_REG_ARB_CYCLE_SIZE 0x280034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -3808,6 +3960,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define XSEM_REG_XSEM_PRTY_MASK_0 0x280130 #define XSEM_REG_XSEM_PRTY_MASK_1 0x280140 +/* [R 32] Parity register #0 read */ +#define XSEM_REG_XSEM_PRTY_STS_0 0x280124 +#define XSEM_REG_XSEM_PRTY_STS_1 0x280134 #define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0) #define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1) #define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) @@ -3847,6 +4002,8 @@ #define EMAC_MDIO_COMM_START_BUSY (1L<<29) #define EMAC_MDIO_MODE_AUTO_POLL (1L<<4) #define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31) +#define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16) +#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16 #define EMAC_MODE_25G_MODE (1L<<5) #define EMAC_MODE_ACPI_RCVD (1L<<20) #define EMAC_MODE_HALF_DUPLEX (1L<<1) @@ -3874,6 +4031,17 @@ #define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) #define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) #define EMAC_TX_MODE_RESET (1L<<0) +#define MISC_REGISTERS_GPIO_1 1 +#define MISC_REGISTERS_GPIO_2 2 +#define MISC_REGISTERS_GPIO_3 3 +#define MISC_REGISTERS_GPIO_CLR_POS 16 +#define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24) +#define MISC_REGISTERS_GPIO_FLOAT_POS 24 +#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1 +#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0 +#define MISC_REGISTERS_GPIO_PORT_SHIFT 4 +#define MISC_REGISTERS_GPIO_SET_POS 8 #define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588 #define MISC_REGISTERS_RESET_REG_1_SET 0x584 #define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598 @@ -3891,6 +4059,25 @@ #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4) #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8) #define MISC_REGISTERS_RESET_REG_3_SET 0x5a4 +#define MISC_REGISTERS_SPIO_4 4 +#define MISC_REGISTERS_SPIO_5 5 +#define MISC_REGISTERS_SPIO_7 7 +#define MISC_REGISTERS_SPIO_CLR_POS 16 +#define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24) +#define GRC_MISC_REGISTERS_SPIO_FLOAT7 0x80000000 +#define GRC_MISC_REGISTERS_SPIO_FLOAT6 0x40000000 +#define GRC_MISC_REGISTERS_SPIO_FLOAT5 0x20000000 +#define GRC_MISC_REGISTERS_SPIO_FLOAT4 0x10000000 +#define MISC_REGISTERS_SPIO_FLOAT_POS 24 +#define MISC_REGISTERS_SPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16 +#define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1 +#define MISC_REGISTERS_SPIO_OUTPUT_LOW 0 +#define MISC_REGISTERS_SPIO_SET_POS 8 +#define HW_LOCK_MAX_RESOURCE_VALUE 31 +#define HW_LOCK_RESOURCE_8072_MDIO 0 +#define HW_LOCK_RESOURCE_GPIO 1 +#define HW_LOCK_RESOURCE_SPIO 2 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18) #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31) #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9) @@ -3918,6 +4105,7 @@ #define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1<<3) #define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1<<2) #define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1<<22) +#define AEU_INPUTS_ATTN_BITS_SPIO5 (1<<15) #define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1<<27) #define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1<<5) #define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1<<25) @@ -4206,6 +4394,9 @@ #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010 #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15 #define MDIO_REG_BANK_GP_STATUS 0x8120 @@ -4362,11 +4553,13 @@ #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001 +#define EXT_PHY_AUTO_NEG_DEVAD 0x7 #define EXT_PHY_OPT_PMA_PMD_DEVAD 0x1 #define EXT_PHY_OPT_WIS_DEVAD 0x2 #define EXT_PHY_OPT_PCS_DEVAD 0x3 #define EXT_PHY_OPT_PHY_XS_DEVAD 0x4 #define EXT_PHY_OPT_CNTL 0x0 +#define EXT_PHY_OPT_CNTL2 0x7 #define EXT_PHY_OPT_PMD_RX_SD 0xa #define EXT_PHY_OPT_PMD_MISC_CNTL 0xca0a #define EXT_PHY_OPT_PHY_IDENTIFIER 0xc800 @@ -4378,11 +4571,24 @@ #define EXT_PHY_OPT_LASI_STATUS 0x9005 #define EXT_PHY_OPT_PCS_STATUS 0x0020 #define EXT_PHY_OPT_XGXS_LANE_STATUS 0x0018 +#define EXT_PHY_OPT_AN_LINK_STATUS 0x8304 +#define EXT_PHY_OPT_AN_CL37_CL73 0x8370 +#define EXT_PHY_OPT_AN_CL37_FD 0xffe4 +#define EXT_PHY_OPT_AN_CL37_AN 0xffe0 +#define EXT_PHY_OPT_AN_ADV 0x11 #define EXT_PHY_KR_PMA_PMD_DEVAD 0x1 #define EXT_PHY_KR_PCS_DEVAD 0x3 #define EXT_PHY_KR_AUTO_NEG_DEVAD 0x7 #define EXT_PHY_KR_CTRL 0x0000 +#define EXT_PHY_KR_STATUS 0x0001 +#define EXT_PHY_KR_AUTO_NEG_COMPLETE 0x0020 +#define EXT_PHY_KR_AUTO_NEG_ADVERT 0x0010 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE 0x0400 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC 0x0800 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH 0x0C00 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK 0x0C00 +#define EXT_PHY_KR_LP_AUTO_NEG 0x0013 #define EXT_PHY_KR_CTRL2 0x0007 #define EXT_PHY_KR_PCS_STATUS 0x0020 #define EXT_PHY_KR_PMD_CTRL 0x0096 @@ -4391,4 +4597,8 @@ #define EXT_PHY_KR_MISC_CTRL1 0xca85 #define EXT_PHY_KR_GEN_CTRL 0xca10 #define EXT_PHY_KR_ROM_CODE 0xca19 +#define EXT_PHY_KR_ROM_RESET_INTERNAL_MP 0x0188 +#define EXT_PHY_KR_ROM_MICRO_RESET 0x018a + +#define EXT_PHY_SFX7101_XGXS_TEST1 0xc00a -- cgit v1.2.2 From 49d66772112f40554ba18d037e0601ac3da0bf79 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:53:13 -0800 Subject: [BNX2X]: Correct RX filtering and MC configuration The configuration of RX filtering needed the following corrections: Drop flags need to be set per Rx queue. Have to tell the microcode to collect drop stats, and properly wait for them to complete when going down. Sometimes we failed to detect proper completion due to a logical error in the wait loop. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 165 +++++++++++++++++++++++++++++----------------------- drivers/net/bnx2x.h | 5 +- 2 files changed, 92 insertions(+), 78 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 5cd785064ba3..103d3e0f24ba 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -298,8 +298,7 @@ static void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) static int bnx2x_mc_assert(struct bnx2x *bp) { - int i, j; - int rc = 0; + int i, j, rc = 0; char last_idx; const char storm[] = {"XTCU"}; const u32 intmem_base[] = { @@ -313,8 +312,9 @@ static int bnx2x_mc_assert(struct bnx2x *bp) for (i = 0; i < 4; i++) { last_idx = REG_RD8(bp, XSTORM_ASSERT_LIST_INDEX_OFFSET + intmem_base[i]); - BNX2X_ERR("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n", - storm[i], last_idx); + if (last_idx) + BNX2X_LOG("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n", + storm[i], last_idx); /* print the asserts */ for (j = 0; j < STROM_ASSERT_ARRAY_SIZE; j++) { @@ -330,7 +330,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp) intmem_base[i]); if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) { - BNX2X_ERR("DATA %cSTORM_ASSERT_INDEX 0x%x =" + BNX2X_LOG("DATA %cSTORM_ASSERT_INDEX 0x%x =" " 0x%08x 0x%08x 0x%08x 0x%08x\n", storm[i], j, row3, row2, row1, row0); rc++; @@ -349,21 +349,22 @@ static void bnx2x_fw_dump(struct bnx2x *bp) int word; mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104); - printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark); + mark = ((mark + 0x3) & ~0x3); + printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark); for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH + offset + 4*word)); data[8] = 0x0; - printk(KERN_ERR PFX "%s", (char *)data); + printk(KERN_CONT "%s", (char *)data); } for (offset = 0xF108; offset <= mark - 0x08000000; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH + offset + 4*word)); data[8] = 0x0; - printk(KERN_ERR PFX "%s", (char *)data); + printk(KERN_CONT "%s", (char *)data); } printk("\n" KERN_ERR PFX "end of fw dump\n"); } @@ -428,10 +429,10 @@ static void bnx2x_panic_dump(struct bnx2x *bp) } } - BNX2X_ERR("def_c_idx(%u) def_u_idx(%u) def_t_idx(%u)" - " def_x_idx(%u) def_att_idx(%u) attn_state(%u)" + BNX2X_ERR("def_c_idx(%u) def_u_idx(%u) def_x_idx(%u)" + " def_t_idx(%u) def_att_idx(%u) attn_state(%u)" " spq_prod_idx(%u)\n", - bp->def_c_idx, bp->def_u_idx, bp->def_t_idx, bp->def_x_idx, + bp->def_c_idx, bp->def_u_idx, bp->def_x_idx, bp->def_t_idx, bp->def_att_idx, bp->attn_state, bp->spq_prod_idx); @@ -789,20 +790,20 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp, fp->state = BNX2X_FP_STATE_HALTED; break; - case (RAMROD_CMD_ID_ETH_PORT_DEL | BNX2X_STATE_CLOSING_WAIT4_DELETE): - DP(NETIF_MSG_IFDOWN, "got delete ramrod\n"); - bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD; - break; - case (RAMROD_CMD_ID_ETH_CFC_DEL | BNX2X_STATE_CLOSING_WAIT4_HALT): - DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n", cid); - bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_DELETED; + DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n", + cid); + bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED; break; case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN): DP(NETIF_MSG_IFUP, "got set mac ramrod\n"); break; + case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(NETIF_MSG_IFUP, "got (un)set mac ramrod\n"); + break; + default: BNX2X_ERR("unexpected ramrod (%d) state is %x\n", command, bp->state); @@ -5236,6 +5237,9 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, atten_status_block); def_sb->atten_status_block.status_block_id = id; + bp->def_att_idx = 0; + bp->attn_state = 0; + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); @@ -5270,6 +5274,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, u_def_status_block); def_sb->u_def_status_block.status_block_id = id; + bp->def_u_idx = 0; + REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_USTRORM_INTMEM + @@ -5287,6 +5293,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, c_def_status_block); def_sb->c_def_status_block.status_block_id = id; + bp->def_c_idx = 0; + REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_CSTRORM_INTMEM + @@ -5304,6 +5312,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, t_def_status_block); def_sb->t_def_status_block.status_block_id = id; + bp->def_t_idx = 0; + REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_TSTRORM_INTMEM + @@ -5321,6 +5331,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, x_def_status_block); def_sb->x_def_status_block.status_block_id = id; + bp->def_x_idx = 0; + REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_XSTRORM_INTMEM + @@ -5333,6 +5345,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index), 0x1); + bp->stat_pending = 0; + bnx2x_ack_sb(bp, id, CSTORM_ID, 0, IGU_INT_ENABLE, 0); } @@ -5476,7 +5490,6 @@ static void bnx2x_init_sp_ring(struct bnx2x *bp) bp->spq_left = MAX_SPQ_PENDING; bp->spq_prod_idx = 0; - bp->dsb_sp_prod_idx = 0; bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX; bp->spq_prod_bd = bp->spq; bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT; @@ -5553,6 +5566,42 @@ static void bnx2x_init_ind_table(struct bnx2x *bp) REG_WR(bp, PRS_REG_A_PRSU_20, 0xf); } +static void bnx2x_set_client_config(struct bnx2x *bp) +{ +#ifdef BCM_VLAN + int mode = bp->rx_mode; +#endif + int i, port = bp->port; + struct tstorm_eth_client_config tstorm_client = {0}; + + tstorm_client.mtu = bp->dev->mtu; + tstorm_client.statistics_counter_id = 0; + tstorm_client.config_flags = + TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE; +#ifdef BCM_VLAN + if (mode && bp->vlgrp) { + tstorm_client.config_flags |= + TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE; + DP(NETIF_MSG_IFUP, "vlan removal enabled\n"); + } +#endif + if (mode != BNX2X_RX_MODE_PROMISC) + tstorm_client.drop_flags = + TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR; + + for_each_queue(bp, i) { + REG_WR(bp, BAR_TSTRORM_INTMEM + + TSTORM_CLIENT_CONFIG_OFFSET(port, i), + ((u32 *)&tstorm_client)[0]); + REG_WR(bp, BAR_TSTRORM_INTMEM + + TSTORM_CLIENT_CONFIG_OFFSET(port, i) + 4, + ((u32 *)&tstorm_client)[1]); + } + +/* DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n", + ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */ +} + static void bnx2x_set_storm_rx_mode(struct bnx2x *bp) { int mode = bp->rx_mode; @@ -5592,41 +5641,9 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp) /* DP(NETIF_MSG_IFUP, "tstorm_mac_filter[%d]: 0x%08x\n", i, ((u32 *)&tstorm_mac_filter)[i]); */ } -} -static void bnx2x_set_client_config(struct bnx2x *bp, int client_id) -{ -#ifdef BCM_VLAN - int mode = bp->rx_mode; -#endif - int port = bp->port; - struct tstorm_eth_client_config tstorm_client = {0}; - - tstorm_client.mtu = bp->dev->mtu; - tstorm_client.statistics_counter_id = 0; - tstorm_client.config_flags = - TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE; -#ifdef BCM_VLAN - if (mode && bp->vlgrp) { - tstorm_client.config_flags |= - TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE; - DP(NETIF_MSG_IFUP, "vlan removal enabled\n"); - } -#endif - tstorm_client.drop_flags = (TSTORM_ETH_CLIENT_CONFIG_DROP_IP_CS_ERR | - TSTORM_ETH_CLIENT_CONFIG_DROP_TCP_CS_ERR | - TSTORM_ETH_CLIENT_CONFIG_DROP_UDP_CS_ERR | - TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR); - - REG_WR(bp, BAR_TSTRORM_INTMEM + - TSTORM_CLIENT_CONFIG_OFFSET(port, client_id), - ((u32 *)&tstorm_client)[0]); - REG_WR(bp, BAR_TSTRORM_INTMEM + - TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) + 4, - ((u32 *)&tstorm_client)[1]); - -/* DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n", - ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */ + if (mode != BNX2X_RX_MODE_NONE) + bnx2x_set_client_config(bp); } static void bnx2x_init_internal(struct bnx2x *bp) @@ -5634,7 +5651,6 @@ static void bnx2x_init_internal(struct bnx2x *bp) int port = bp->port; struct tstorm_eth_function_common_config tstorm_config = {0}; struct stats_indication_flags stats_flags = {0}; - int i; if (is_multi(bp)) { tstorm_config.config_flags = MULTI_FLAGS; @@ -5651,10 +5667,6 @@ static void bnx2x_init_internal(struct bnx2x *bp) bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */ bnx2x_set_storm_rx_mode(bp); - for_each_queue(bp, i) - bnx2x_set_client_config(bp, i); - - stats_flags.collect_eth = cpu_to_le32(1); REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port), @@ -6961,7 +6973,7 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, mb(); /* state is changed by bnx2x_sp_event()*/ - if (*state_p != state) + if (*state_p == state) return 0; timeout--; @@ -6970,9 +6982,10 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, } /* timeout! */ - BNX2X_ERR("timeout waiting for ramrod %d on %d\n", state, idx); - return -EBUSY; + BNX2X_ERR("timeout %s for state %x on IDX [%d]\n", + poll ? "polling" : "waiting", state, idx); + return -EBUSY; } static int bnx2x_setup_leading(struct bnx2x *bp) @@ -7239,7 +7252,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) /* delete cfc entry */ bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CFC_DEL, index, 0, 0, 1); - return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_DELETED, index, + return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_CLOSED, index, &(bp->fp[index].state), 1); } @@ -7247,7 +7260,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) static void bnx2x_stop_leading(struct bnx2x *bp) { - + u16 dsb_sp_prod_idx; /* if the other port is handling traffic, this can take a lot of time */ int timeout = 500; @@ -7262,23 +7275,29 @@ static void bnx2x_stop_leading(struct bnx2x *bp) &(bp->fp[0].state), 1)) return; - bp->dsb_sp_prod_idx = *bp->dsb_sp_prod; + dsb_sp_prod_idx = *bp->dsb_sp_prod; /* Send CFC_DELETE ramrod */ bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_PORT_DEL, 0, 0, 0, 1); - /* - Wait for completion. + /* Wait for completion to arrive on default status block we are going to reset the chip anyway so there is not much to do if this times out */ - while (bp->dsb_sp_prod_idx == *bp->dsb_sp_prod && timeout) { - timeout--; - msleep(1); + while ((dsb_sp_prod_idx == *bp->dsb_sp_prod) && timeout) { + timeout--; + msleep(1); } - + if (!timeout) { + DP(NETIF_MSG_IFDOWN, "timeout polling for completion " + "dsb_sp_prod 0x%x != dsb_sp_prod_idx 0x%x\n", + *bp->dsb_sp_prod, dsb_sp_prod_idx); + } + bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD; + bp->fp[0].state = BNX2X_FP_STATE_CLOSED; } + static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq) { u32 reset_code = 0; @@ -8968,9 +8987,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) * net_device service functions */ -/* Called with rtnl_lock from vlan functions and also netif_tx_lock - * from set_multicast. - */ +/* called with netif_tx_lock from set_multicast */ static void bnx2x_set_rx_mode(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); @@ -9496,7 +9513,7 @@ static void bnx2x_vlan_rx_register(struct net_device *dev, bp->vlgrp = vlgrp; if (netif_running(dev)) - bnx2x_set_rx_mode(dev); + bnx2x_set_client_config(bp); } #endif diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index dc423e58dad8..d0e5ab1af444 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -1,6 +1,6 @@ /* bnx2x.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -431,8 +431,6 @@ struct bnx2x_fastpath { #define BNX2X_FP_STATE_OPEN 0xa0000 #define BNX2X_FP_STATE_HALTING 0xb0000 #define BNX2X_FP_STATE_HALTED 0xc0000 -#define BNX2X_FP_STATE_DELETED 0xd0000 -#define BNX2X_FP_STATE_CLOSE_IRQ 0xe0000 int index; @@ -513,7 +511,6 @@ struct bnx2x { struct eth_spe *spq; dma_addr_t spq_mapping; u16 spq_prod_idx; - u16 dsb_sp_prod_idx; struct eth_spe *spq_prod_bd; struct eth_spe *spq_last_bd; u16 *dsb_sp_prod; -- cgit v1.2.2 From 0e39e645b3e83873d59b865df2b671c822e2182c Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:54:03 -0800 Subject: [BNX2X]: correct statistics Errors were summed improperly, some stats were missing. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 164 ++++++++++++++++++++++++++-------------------------- drivers/net/bnx2x.h | 4 +- 2 files changed, 83 insertions(+), 85 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 103d3e0f24ba..a35feee513db 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -4972,39 +4972,37 @@ static void bnx2x_update_net_stats(struct bnx2x *bp) nstats->rx_bytes = bnx2x_hilo(&estats->total_bytes_received_hi); - nstats->tx_bytes = - bnx2x_hilo(&estats->total_bytes_transmitted_hi); + nstats->tx_bytes = bnx2x_hilo(&estats->total_bytes_transmitted_hi); - nstats->rx_dropped = estats->checksum_discard + - estats->mac_discard; + nstats->rx_dropped = estats->checksum_discard + estats->mac_discard; nstats->tx_dropped = 0; nstats->multicast = bnx2x_hilo(&estats->total_multicast_packets_transmitted_hi); - nstats->collisions = - estats->single_collision_transmit_frames + - estats->multiple_collision_transmit_frames + - estats->late_collision_frames + - estats->excessive_collision_frames; + nstats->collisions = estats->single_collision_transmit_frames + + estats->multiple_collision_transmit_frames + + estats->late_collision_frames + + estats->excessive_collision_frames; nstats->rx_length_errors = estats->runt_packets_received + estats->jabber_packets_received; - nstats->rx_over_errors = estats->no_buff_discard; + nstats->rx_over_errors = estats->brb_discard + + estats->brb_truncate_discard; nstats->rx_crc_errors = estats->crc_receive_errors; nstats->rx_frame_errors = estats->alignment_errors; - nstats->rx_fifo_errors = estats->brb_discard + - estats->brb_truncate_discard; + nstats->rx_fifo_errors = estats->no_buff_discard; nstats->rx_missed_errors = estats->xxoverflow_discard; nstats->rx_errors = nstats->rx_length_errors + nstats->rx_over_errors + nstats->rx_crc_errors + nstats->rx_frame_errors + - nstats->rx_fifo_errors; + nstats->rx_fifo_errors + + nstats->rx_missed_errors; nstats->tx_aborted_errors = estats->late_collision_frames + - estats->excessive_collision_frames; + estats->excessive_collision_frames; nstats->tx_carrier_errors = estats->false_carrier_detections; nstats->tx_fifo_errors = 0; nstats->tx_heartbeat_errors = 0; @@ -8755,81 +8753,87 @@ static void bnx2x_self_test(struct net_device *dev, static struct { char string[ETH_GSTRING_LEN]; } bnx2x_stats_str_arr[BNX2X_NUM_STATS] = { - { "rx_bytes"}, /* 0 */ - { "rx_error_bytes"}, /* 1 */ - { "tx_bytes"}, /* 2 */ - { "tx_error_bytes"}, /* 3 */ - { "rx_ucast_packets"}, /* 4 */ - { "rx_mcast_packets"}, /* 5 */ - { "rx_bcast_packets"}, /* 6 */ - { "tx_ucast_packets"}, /* 7 */ - { "tx_mcast_packets"}, /* 8 */ - { "tx_bcast_packets"}, /* 9 */ - { "tx_mac_errors"}, /* 10 */ - { "tx_carrier_errors"}, /* 11 */ - { "rx_crc_errors"}, /* 12 */ - { "rx_align_errors"}, /* 13 */ - { "tx_single_collisions"}, /* 14 */ - { "tx_multi_collisions"}, /* 15 */ - { "tx_deferred"}, /* 16 */ - { "tx_excess_collisions"}, /* 17 */ - { "tx_late_collisions"}, /* 18 */ - { "tx_total_collisions"}, /* 19 */ - { "rx_fragments"}, /* 20 */ - { "rx_jabbers"}, /* 21 */ - { "rx_undersize_packets"}, /* 22 */ - { "rx_oversize_packets"}, /* 23 */ - { "rx_xon_frames"}, /* 24 */ - { "rx_xoff_frames"}, /* 25 */ - { "tx_xon_frames"}, /* 26 */ - { "tx_xoff_frames"}, /* 27 */ - { "rx_mac_ctrl_frames"}, /* 28 */ - { "rx_filtered_packets"}, /* 29 */ - { "rx_discards"}, /* 30 */ + { "rx_bytes"}, + { "rx_error_bytes"}, + { "tx_bytes"}, + { "tx_error_bytes"}, + { "rx_ucast_packets"}, + { "rx_mcast_packets"}, + { "rx_bcast_packets"}, + { "tx_ucast_packets"}, + { "tx_mcast_packets"}, + { "tx_bcast_packets"}, + { "tx_mac_errors"}, /* 10 */ + { "tx_carrier_errors"}, + { "rx_crc_errors"}, + { "rx_align_errors"}, + { "tx_single_collisions"}, + { "tx_multi_collisions"}, + { "tx_deferred"}, + { "tx_excess_collisions"}, + { "tx_late_collisions"}, + { "tx_total_collisions"}, + { "rx_fragments"}, /* 20 */ + { "rx_jabbers"}, + { "rx_undersize_packets"}, + { "rx_oversize_packets"}, + { "rx_xon_frames"}, + { "rx_xoff_frames"}, + { "tx_xon_frames"}, + { "tx_xoff_frames"}, + { "rx_mac_ctrl_frames"}, + { "rx_filtered_packets"}, + { "rx_discards"}, /* 30 */ + { "brb_discard"}, + { "brb_truncate"}, + { "xxoverflow"} }; #define STATS_OFFSET32(offset_name) \ (offsetof(struct bnx2x_eth_stats, offset_name) / 4) static unsigned long bnx2x_stats_offset_arr[BNX2X_NUM_STATS] = { - STATS_OFFSET32(total_bytes_received_hi), /* 0 */ - STATS_OFFSET32(stat_IfHCInBadOctets_hi), /* 1 */ - STATS_OFFSET32(total_bytes_transmitted_hi), /* 2 */ - STATS_OFFSET32(stat_IfHCOutBadOctets_hi), /* 3 */ - STATS_OFFSET32(total_unicast_packets_received_hi), /* 4 */ - STATS_OFFSET32(total_multicast_packets_received_hi), /* 5 */ - STATS_OFFSET32(total_broadcast_packets_received_hi), /* 6 */ - STATS_OFFSET32(total_unicast_packets_transmitted_hi), /* 7 */ - STATS_OFFSET32(total_multicast_packets_transmitted_hi), /* 8 */ - STATS_OFFSET32(total_broadcast_packets_transmitted_hi), /* 9 */ - STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors), /* 10 */ - STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors), /* 11 */ - STATS_OFFSET32(crc_receive_errors), /* 12 */ - STATS_OFFSET32(alignment_errors), /* 13 */ - STATS_OFFSET32(single_collision_transmit_frames), /* 14 */ - STATS_OFFSET32(multiple_collision_transmit_frames), /* 15 */ - STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions), /* 16 */ - STATS_OFFSET32(excessive_collision_frames), /* 17 */ - STATS_OFFSET32(late_collision_frames), /* 18 */ - STATS_OFFSET32(number_of_bugs_found_in_stats_spec), /* 19 */ - STATS_OFFSET32(runt_packets_received), /* 20 */ - STATS_OFFSET32(jabber_packets_received), /* 21 */ - STATS_OFFSET32(error_runt_packets_received), /* 22 */ - STATS_OFFSET32(error_jabber_packets_received), /* 23 */ - STATS_OFFSET32(pause_xon_frames_received), /* 24 */ - STATS_OFFSET32(pause_xoff_frames_received), /* 25 */ - STATS_OFFSET32(pause_xon_frames_transmitted), /* 26 */ - STATS_OFFSET32(pause_xoff_frames_transmitted), /* 27 */ - STATS_OFFSET32(control_frames_received), /* 28 */ - STATS_OFFSET32(mac_filter_discard), /* 29 */ - STATS_OFFSET32(no_buff_discard), /* 30 */ + STATS_OFFSET32(total_bytes_received_hi), + STATS_OFFSET32(stat_IfHCInBadOctets_hi), + STATS_OFFSET32(total_bytes_transmitted_hi), + STATS_OFFSET32(stat_IfHCOutBadOctets_hi), + STATS_OFFSET32(total_unicast_packets_received_hi), + STATS_OFFSET32(total_multicast_packets_received_hi), + STATS_OFFSET32(total_broadcast_packets_received_hi), + STATS_OFFSET32(total_unicast_packets_transmitted_hi), + STATS_OFFSET32(total_multicast_packets_transmitted_hi), + STATS_OFFSET32(total_broadcast_packets_transmitted_hi), + STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors), /* 10 */ + STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors), + STATS_OFFSET32(crc_receive_errors), + STATS_OFFSET32(alignment_errors), + STATS_OFFSET32(single_collision_transmit_frames), + STATS_OFFSET32(multiple_collision_transmit_frames), + STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions), + STATS_OFFSET32(excessive_collision_frames), + STATS_OFFSET32(late_collision_frames), + STATS_OFFSET32(number_of_bugs_found_in_stats_spec), + STATS_OFFSET32(runt_packets_received), /* 20 */ + STATS_OFFSET32(jabber_packets_received), + STATS_OFFSET32(error_runt_packets_received), + STATS_OFFSET32(error_jabber_packets_received), + STATS_OFFSET32(pause_xon_frames_received), + STATS_OFFSET32(pause_xoff_frames_received), + STATS_OFFSET32(pause_xon_frames_transmitted), + STATS_OFFSET32(pause_xoff_frames_transmitted), + STATS_OFFSET32(control_frames_received), + STATS_OFFSET32(mac_filter_discard), + STATS_OFFSET32(no_buff_discard), /* 30 */ + STATS_OFFSET32(brb_discard), + STATS_OFFSET32(brb_truncate_discard), + STATS_OFFSET32(xxoverflow_discard) }; static u8 bnx2x_stats_len_arr[BNX2X_NUM_STATS] = { 8, 0, 8, 0, 8, 8, 8, 8, 8, 8, 4, 0, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, - 4, + 4, 4, 4, 4 }; static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf) @@ -9372,11 +9376,6 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } -static struct net_device_stats *bnx2x_get_stats(struct net_device *dev) -{ - return &dev->stats; -} - /* Called with rtnl_lock */ static int bnx2x_open(struct net_device *dev) { @@ -9784,7 +9783,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, dev->hard_start_xmit = bnx2x_start_xmit; dev->watchdog_timeo = TX_TIMEOUT; - dev->get_stats = bnx2x_get_stats; dev->ethtool_ops = &bnx2x_ethtool_ops; dev->open = bnx2x_open; dev->stop = bnx2x_close; diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index d0e5ab1af444..e2a36e850fc2 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -854,8 +854,8 @@ struct bnx2x { #define MAX_SPQ_PENDING 8 -#define BNX2X_NUM_STATS 31 -#define BNX2X_NUM_TESTS 2 +#define BNX2X_NUM_STATS 34 +#define BNX2X_NUM_TESTS 1 #define DPM_TRIGER_TYPE 0x40 -- cgit v1.2.2 From 615f8fd9c2ab475c420d5baa7def37c5cb0d50d3 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:54:54 -0800 Subject: [BNX2X]: fix MSI-X/INT#A errata Errata A0.158 workaround. Running in INT#A mode after running with MSI-X fails due to a PCI core bug. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index a35feee513db..6f987fa10a6d 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -443,7 +443,7 @@ static void bnx2x_panic_dump(struct bnx2x *bp) DP(BNX2X_MSG_STATS, "stats_state - DISABLE\n"); } -static void bnx2x_enable_int(struct bnx2x *bp) +static void bnx2x_int_enable(struct bnx2x *bp) { int port = bp->port; u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; @@ -456,18 +456,26 @@ static void bnx2x_enable_int(struct bnx2x *bp) HC_CONFIG_0_REG_ATTN_BIT_EN_0); } else { val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | HC_CONFIG_0_REG_INT_LINE_EN_0 | HC_CONFIG_0_REG_ATTN_BIT_EN_0); + + /* Errata A0.158 workaround */ + DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) MSI-X %d\n", + val, port, addr, msix); + + REG_WR(bp, addr, val); + val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0; } - DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) msi %d\n", + DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) MSI-X %d\n", val, port, addr, msix); REG_WR(bp, addr, val); } -static void bnx2x_disable_int(struct bnx2x *bp) +static void bnx2x_int_disable(struct bnx2x *bp) { int port = bp->port; u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; @@ -486,7 +494,7 @@ static void bnx2x_disable_int(struct bnx2x *bp) BNX2X_ERR("BUG! proper val not read from IGU!\n"); } -static void bnx2x_disable_int_sync(struct bnx2x *bp) +static void bnx2x_int_disable_sync(struct bnx2x *bp) { int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; @@ -494,7 +502,7 @@ static void bnx2x_disable_int_sync(struct bnx2x *bp) atomic_inc(&bp->intr_sem); /* prevent the HW from sending interrupts */ - bnx2x_disable_int(bp); + bnx2x_int_disable(bp); /* make sure all ISRs are done */ if (msix) { @@ -5710,7 +5718,7 @@ static void bnx2x_nic_init(struct bnx2x *bp) bnx2x_init_internal(bp); bnx2x_init_stats(bp); bnx2x_init_ind_table(bp); - bnx2x_enable_int(bp); + bnx2x_int_enable(bp); } @@ -7154,7 +7162,7 @@ stop_netif: napi_disable(&bnx2x_fp(bp, i, napi)); int_disable: - bnx2x_disable_int_sync(bp); + bnx2x_int_disable_sync(bp); bnx2x_free_skbs(bp); bnx2x_free_irq(bp); @@ -7174,7 +7182,7 @@ static void bnx2x_netif_stop(struct bnx2x *bp) bp->rx_mode = BNX2X_RX_MODE_NONE; bnx2x_set_storm_rx_mode(bp); - bnx2x_disable_int_sync(bp); + bnx2x_int_disable_sync(bp); bnx2x_link_reset(bp); for_each_queue(bp, i) -- cgit v1.2.2 From 877e9aa4c31d8d1670b21824b819929435f46579 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:55:53 -0800 Subject: [BNX2X]: fix HW attentions and error handling Some of the HW attentions, used to indicate an error were not properly acked. This will cause the driver to endlessly receive interrupts when such an error happens. Had to break the code into smaller chunks because it got too nested. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 229 ++++++++++++++++++++++++++++++++++------------------ 1 file changed, 150 insertions(+), 79 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 6f987fa10a6d..b99e3b72fac6 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -4089,8 +4089,8 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) u32 igu_addr = (IGU_ADDR_ATTN_BITS_SET + IGU_PORT_BASE * port) * 8; u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : MISC_REG_AEU_MASK_ATTN_FUNC_0; - u32 nig_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 : - NIG_REG_MASK_INTERRUPT_PORT0; + u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 : + NIG_REG_MASK_INTERRUPT_PORT0; if (~bp->aeu_mask & (asserted & 0xff)) BNX2X_ERR("IGU ERROR\n"); @@ -4108,15 +4108,11 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) if (asserted & ATTN_HARD_WIRED_MASK) { if (asserted & ATTN_NIG_FOR_FUNC) { - u32 nig_status_port; - u32 nig_int_addr = port ? - NIG_REG_STATUS_INTERRUPT_PORT1 : - NIG_REG_STATUS_INTERRUPT_PORT0; - bp->nig_mask = REG_RD(bp, nig_mask_addr); - REG_WR(bp, nig_mask_addr, 0); + /* save nig interrupt mask */ + bp->nig_mask = REG_RD(bp, nig_int_mask_addr); + REG_WR(bp, nig_int_mask_addr, 0); - nig_status_port = REG_RD(bp, nig_int_addr); bnx2x_link_update(bp); /* handle unicore attn? */ @@ -4169,15 +4165,132 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) /* now set back the mask */ if (asserted & ATTN_NIG_FOR_FUNC) - REG_WR(bp, nig_mask_addr, bp->nig_mask); + REG_WR(bp, nig_int_mask_addr, bp->nig_mask); } -static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) +static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) { int port = bp->port; - int index; + int reg_offset; + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) { + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + + val = REG_RD(bp, reg_offset); + val &= ~AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("SPIO5 hw attention\n"); + + switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: + /* Fan failure attention */ + + /* The PHY reset is controled by GPIO 1 */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + /* Low power mode is controled by GPIO 2 */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + /* mark the failure */ + bp->ext_phy_config &= + ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK; + bp->ext_phy_config |= + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE; + SHMEM_WR(bp, + dev_info.port_hw_config[port]. + external_phy_config, + bp->ext_phy_config); + /* log the failure */ + printk(KERN_ERR PFX "Fan Failure on Network" + " Controller %s has caused the driver to" + " shutdown the card to prevent permanent" + " damage. Please contact Dell Support for" + " assistance\n", bp->dev->name); + break; + + default: + break; + } + } +} + +static inline void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & BNX2X_DOORQ_ASSERT) { + + val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR); + BNX2X_ERR("DB hw attention 0x%x\n", val); + /* DORQ discard attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from DORQ\n"); + } +} + +static inline void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) { + + val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR); + BNX2X_ERR("CFC hw attention 0x%x\n", val); + /* CFC error attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from CFC\n"); + } + + if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) { + + val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0); + BNX2X_ERR("PXP hw attention 0x%x\n", val); + /* RQ_USDMDP_FIFO_OVERFLOW */ + if (val & 0x18000) + BNX2X_ERR("FATAL error from PXP\n"); + } +} + +static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) +{ + if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) { + + if (attn & BNX2X_MC_ASSERT_BITS) { + + BNX2X_ERR("MC assert!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0); + bnx2x_panic(); + + } else if (attn & BNX2X_MCP_ASSERT) { + + BNX2X_ERR("MCP assert!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0); + bnx2x_mc_assert(bp); + + } else + BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn); + } + + if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) { + + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff); + BNX2X_ERR("LATCHED attention 0x%x (masked)\n", attn); + } +} + +static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) +{ struct attn_route attn; struct attn_route group_mask; + int port = bp->port; + int index; u32 reg_addr; u32 val; @@ -4198,64 +4311,14 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) DP(NETIF_MSG_HW, "group[%d]: %llx\n", index, (unsigned long long)group_mask.sig[0]); - if (attn.sig[3] & group_mask.sig[3] & - EVEREST_GEN_ATTN_IN_USE_MASK) { - - if (attn.sig[3] & BNX2X_MC_ASSERT_BITS) { - - BNX2X_ERR("MC assert!\n"); - bnx2x_panic(); - - } else if (attn.sig[3] & BNX2X_MCP_ASSERT) { - - BNX2X_ERR("MCP assert!\n"); - REG_WR(bp, - MISC_REG_AEU_GENERAL_ATTN_11, 0); - bnx2x_mc_assert(bp); - - } else { - BNX2X_ERR("UNKOWEN HW ASSERT!\n"); - } - } - - if (attn.sig[1] & group_mask.sig[1] & - BNX2X_DOORQ_ASSERT) { - - val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR); - BNX2X_ERR("DB hw attention 0x%x\n", val); - /* DORQ discard attention */ - if (val & 0x2) - BNX2X_ERR("FATAL error from DORQ\n"); - } - - if (attn.sig[2] & group_mask.sig[2] & - AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) { - - val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR); - BNX2X_ERR("CFC hw attention 0x%x\n", val); - /* CFC error attention */ - if (val & 0x2) - BNX2X_ERR("FATAL error from CFC\n"); - } - - if (attn.sig[2] & group_mask.sig[2] & - AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) { - - val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0); - BNX2X_ERR("PXP hw attention 0x%x\n", val); - /* RQ_USDMDP_FIFO_OVERFLOW */ - if (val & 0x18000) - BNX2X_ERR("FATAL error from PXP\n"); - } - - if (attn.sig[3] & group_mask.sig[3] & - EVEREST_LATCHED_ATTN_IN_USE_MASK) { - - REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, - 0x7ff); - DP(NETIF_MSG_HW, "got latched bits 0x%x\n", - attn.sig[3]); - } + bnx2x_attn_int_deasserted3(bp, + attn.sig[3] & group_mask.sig[3]); + bnx2x_attn_int_deasserted1(bp, + attn.sig[1] & group_mask.sig[1]); + bnx2x_attn_int_deasserted2(bp, + attn.sig[2] & group_mask.sig[2]); + bnx2x_attn_int_deasserted0(bp, + attn.sig[0] & group_mask.sig[0]); if ((attn.sig[0] & group_mask.sig[0] & HW_INTERRUT_ASSERT_SET_0) || @@ -4263,7 +4326,15 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) HW_INTERRUT_ASSERT_SET_1) || (attn.sig[2] & group_mask.sig[2] & HW_INTERRUT_ASSERT_SET_2)) - BNX2X_ERR("FATAL HW block attention\n"); + BNX2X_ERR("FATAL HW block attention" + " set0 0x%x set1 0x%x" + " set2 0x%x\n", + (attn.sig[0] & group_mask.sig[0] & + HW_INTERRUT_ASSERT_SET_0), + (attn.sig[1] & group_mask.sig[1] & + HW_INTERRUT_ASSERT_SET_1), + (attn.sig[2] & group_mask.sig[2] & + HW_INTERRUT_ASSERT_SET_2)); if ((attn.sig[0] & group_mask.sig[0] & HW_PRTY_ASSERT_SET_0) || @@ -4271,7 +4342,7 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) HW_PRTY_ASSERT_SET_1) || (attn.sig[2] & group_mask.sig[2] & HW_PRTY_ASSERT_SET_2)) - BNX2X_ERR("FATAL HW block parity attention\n"); + BNX2X_ERR("FATAL HW block parity attention\n"); } } @@ -4336,7 +4407,7 @@ static void bnx2x_sp_task(struct work_struct *work) /* Return here if interrupt is disabled */ if (unlikely(atomic_read(&bp->intr_sem) != 0)) { - DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n"); + DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n"); return; } @@ -4346,12 +4417,11 @@ static void bnx2x_sp_task(struct work_struct *work) DP(NETIF_MSG_INTR, "got a slowpath interrupt (updated %x)\n", status); - if (status & 0x1) { - /* HW attentions */ + /* HW attentions */ + if (status & 0x1) bnx2x_attn_int(bp); - } - /* CStorm events: query_stats, cfc delete ramrods */ + /* CStorm events: query_stats, port delete ramrod */ if (status & 0x2) bp->stat_pending = 0; @@ -4365,6 +4435,7 @@ static void bnx2x_sp_task(struct work_struct *work) IGU_INT_NOP, 1); bnx2x_ack_sb(bp, DEF_SB_ID, TSTORM_ID, le16_to_cpu(bp->def_t_idx), IGU_INT_ENABLE, 1); + } static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) @@ -4374,11 +4445,11 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) /* Return here if interrupt is disabled */ if (unlikely(atomic_read(&bp->intr_sem) != 0)) { - DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n"); + DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n"); return IRQ_HANDLED; } - bnx2x_ack_sb(bp, 16, XSTORM_ID, 0, IGU_INT_DISABLE, 0); + bnx2x_ack_sb(bp, DEF_SB_ID, XSTORM_ID, 0, IGU_INT_DISABLE, 0); #ifdef BNX2X_STOP_ON_ERROR if (unlikely(bp->panic)) -- cgit v1.2.2 From 228241eb58ad13e7cf2ddd9c92eabb5c3055cf5c Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:56:57 -0800 Subject: [BNX2X]: fix slowpath races and locking Fixed locking between fastpath and slowpath operations. Corrected order of traffic disabling to prevent race when going down under traffic. - first have the microcode drop all incoming packets - then do the slowpath stuff - only then reset the MAC Got rid of in_reset_task. Remove_one() and friends would deference a null pointer if init_one failed. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 213 ++++++++++++++++++++++++++++------------------------ drivers/net/bnx2x.h | 3 - 2 files changed, 116 insertions(+), 100 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index b99e3b72fac6..d21599cfeb89 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -6881,14 +6881,11 @@ static void bnx2x_free_msix_irqs(struct bnx2x *bp) "state(%x)\n", i, bp->msix_table[i + 1].vector, bnx2x_fp(bp, i, state)); - if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED) { - - free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]); - bnx2x_fp(bp, i, state) = BNX2X_FP_STATE_CLOSED; - - } else - DP(NETIF_MSG_IFDOWN, "irq not freed\n"); + if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED) + BNX2X_ERR("IRQ of fp #%d being freed while " + "state != closed\n", i); + free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]); } } @@ -6918,7 +6915,7 @@ static int bnx2x_enable_msix(struct bnx2x *bp) if (pci_enable_msix(bp->pdev, &bp->msix_table[0], bp->num_queues + 1)){ - BNX2X_ERR("failed to enable msix\n"); + BNX2X_LOG("failed to enable MSI-X\n"); return -1; } @@ -6935,8 +6932,6 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp) int i, rc; - DP(NETIF_MSG_IFUP, "about to request sp irq\n"); - rc = request_irq(bp->msix_table[0].vector, bnx2x_msix_sp_int, 0, bp->dev->name, bp->dev); @@ -6951,7 +6946,8 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp) bp->dev->name, &bp->fp[i]); if (rc) { - BNX2X_ERR("request fp #%d irq failed\n", i); + BNX2X_ERR("request fp #%d irq failed " + "rc %d\n", i, rc); bnx2x_free_msix_irqs(bp); return -EBUSY; } @@ -7084,12 +7080,13 @@ static int bnx2x_setup_multi(struct bnx2x *bp, int index) /* reset IGU state */ bnx2x_ack_sb(bp, index, CSTORM_ID, 0, IGU_INT_ENABLE, 0); + /* SETUP ramrod */ bp->fp[index].state = BNX2X_FP_STATE_OPENING; bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CLIENT_SETUP, index, 0, index, 0); /* Wait for completion */ return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_OPEN, index, - &(bp->fp[index].state), 1); + &(bp->fp[index].state), 0); } @@ -7099,8 +7096,8 @@ static void bnx2x_set_rx_mode(struct net_device *dev); static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) { - int rc; - int i = 0; + u32 load_code; + int i; bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD; @@ -7110,12 +7107,17 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) initialized, otherwise - not. */ if (!nomcp) { - rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); - if (rc == FW_MSG_CODE_DRV_LOAD_REFUSED) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); + if (!load_code) { + BNX2X_ERR("MCP response failure, unloading\n"); + return -EBUSY; + } + if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) { + BNX2X_ERR("MCP refused load request, unloading\n"); return -EBUSY; /* other port in diagnostic mode */ } } else { - rc = FW_MSG_CODE_DRV_LOAD_COMMON; + load_code = FW_MSG_CODE_DRV_LOAD_COMMON; } /* if we can't use msix we only need one fp, @@ -7153,13 +7155,13 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) if (bp->flags & USING_MSIX_FLAG) { if (bnx2x_req_msix_irqs(bp)) { pci_disable_msix(bp->pdev); - goto out_error; + goto load_error; } } else { if (bnx2x_req_irq(bp)) { BNX2X_ERR("IRQ request failed, aborting\n"); - goto out_error; + goto load_error; } } } @@ -7170,9 +7172,10 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) /* Initialize HW */ - if (bnx2x_function_init(bp, (rc == FW_MSG_CODE_DRV_LOAD_COMMON))) { + if (bnx2x_function_init(bp, + (load_code == FW_MSG_CODE_DRV_LOAD_COMMON))) { BNX2X_ERR("HW init failed, aborting\n"); - goto out_error; + goto load_error; } @@ -7184,11 +7187,10 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) /* Send LOAD_DONE command to MCP */ if (!nomcp) { - rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE); - DP(NETIF_MSG_IFUP, "rc = 0x%x\n", rc); - if (!rc) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE); + if (!load_code) { BNX2X_ERR("MCP response failure, unloading\n"); - goto int_disable; + goto load_int_disable; } } @@ -7200,11 +7202,11 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) napi_enable(&bnx2x_fp(bp, i, napi)); if (bnx2x_setup_leading(bp)) - goto stop_netif; + goto load_stop_netif; for_each_nondefault_queue(bp, i) if (bnx2x_setup_multi(bp, i)) - goto stop_netif; + goto load_stop_netif; bnx2x_set_mac_addr(bp); @@ -7228,42 +7230,24 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) return 0; -stop_netif: +load_stop_netif: for_each_queue(bp, i) napi_disable(&bnx2x_fp(bp, i, napi)); -int_disable: +load_int_disable: bnx2x_int_disable_sync(bp); bnx2x_free_skbs(bp); bnx2x_free_irq(bp); -out_error: +load_error: bnx2x_free_mem(bp); /* TBD we really need to reset the chip if we want to recover from this */ - return rc; + return -EBUSY; } -static void bnx2x_netif_stop(struct bnx2x *bp) -{ - int i; - - bp->rx_mode = BNX2X_RX_MODE_NONE; - bnx2x_set_storm_rx_mode(bp); - - bnx2x_int_disable_sync(bp); - bnx2x_link_reset(bp); - - for_each_queue(bp, i) - napi_disable(&bnx2x_fp(bp, i, napi)); - - if (netif_running(bp->dev)) { - netif_tx_disable(bp->dev); - bp->dev->trans_start = jiffies; /* prevent tx timeout */ - } -} static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code) { @@ -7354,7 +7338,7 @@ static void bnx2x_stop_leading(struct bnx2x *bp) dsb_sp_prod_idx = *bp->dsb_sp_prod; - /* Send CFC_DELETE ramrod */ + /* Send PORT_DELETE ramrod */ bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_PORT_DEL, 0, 0, 0, 1); /* Wait for completion to arrive on default status block @@ -7375,35 +7359,48 @@ static void bnx2x_stop_leading(struct bnx2x *bp) } -static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq) +static int bnx2x_nic_unload(struct bnx2x *bp, int free_irq) { u32 reset_code = 0; - int rc; - int i; + int i, timeout; bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; - /* Calling flush_scheduled_work() may deadlock because - * linkwatch_event() may be on the workqueue and it will try to get - * the rtnl_lock which we are holding. - */ + del_timer_sync(&bp->timer); - while (bp->in_reset_task) - msleep(1); + bp->rx_mode = BNX2X_RX_MODE_NONE; + bnx2x_set_storm_rx_mode(bp); - /* Delete the timer: do it before disabling interrupts, as it - may be still STAT_QUERY ramrod pending after stopping the timer */ - del_timer_sync(&bp->timer); + if (netif_running(bp->dev)) { + netif_tx_disable(bp->dev); + bp->dev->trans_start = jiffies; /* prevent tx timeout */ + } + + /* Wait until all fast path tasks complete */ + for_each_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + timeout = 1000; + while (bnx2x_has_work(fp) && (timeout--)) + msleep(1); + if (!timeout) + BNX2X_ERR("timeout waiting for queue[%d]\n", i); + } /* Wait until stat ramrod returns and all SP tasks complete */ - while (bp->stat_pending && (bp->spq_left != MAX_SPQ_PENDING)) + timeout = 1000; + while ((bp->stat_pending || (bp->spq_left != MAX_SPQ_PENDING)) && + (timeout--)) msleep(1); - /* Stop fast path, disable MAC, disable interrupts, disable napi */ - bnx2x_netif_stop(bp); + for_each_queue(bp, i) + napi_disable(&bnx2x_fp(bp, i, napi)); + /* Disable interrupts after Tx and Rx are disabled on stack level */ + bnx2x_int_disable_sync(bp); if (bp->flags & NO_WOL_FLAG) reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP; + else if (bp->wol) { u32 emac_base = bp->port ? GRCBASE_EMAC0 : GRCBASE_EMAC1; u8 *mac_addr = bp->dev->dev_addr; @@ -7420,28 +7417,37 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq) EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val); reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN; + } else reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + /* Close multi and leading connections */ for_each_nondefault_queue(bp, i) if (bnx2x_stop_multi(bp, i)) - goto error; - + goto unload_error; bnx2x_stop_leading(bp); + if ((bp->state != BNX2X_STATE_CLOSING_WAIT4_UNLOAD) || + (bp->fp[0].state != BNX2X_FP_STATE_CLOSED)) { + DP(NETIF_MSG_IFDOWN, "failed to close leading properly!" + "state 0x%x fp[0].state 0x%x", + bp->state, bp->fp[0].state); + } + +unload_error: + bnx2x_link_reset(bp); -error: if (!nomcp) - rc = bnx2x_fw_command(bp, reset_code); + reset_code = bnx2x_fw_command(bp, reset_code); else - rc = FW_MSG_CODE_DRV_UNLOAD_COMMON; + reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON; /* Release IRQs */ - if (fre_irq) + if (free_irq) bnx2x_free_irq(bp); /* Reset the chip */ - bnx2x_reset_chip(bp, rc); + bnx2x_reset_chip(bp, reset_code); /* Report UNLOAD_DONE to MCP */ if (!nomcp) @@ -7452,8 +7458,7 @@ error: bnx2x_free_mem(bp); bp->state = BNX2X_STATE_CLOSED; - /* Set link down */ - bp->link_up = 0; + netif_carrier_off(bp->dev); return 0; @@ -9468,16 +9473,13 @@ static int bnx2x_open(struct net_device *dev) /* Called with rtnl_lock */ static int bnx2x_close(struct net_device *dev) { - int rc; struct bnx2x *bp = netdev_priv(dev); /* Unload the driver, release IRQs */ - rc = bnx2x_nic_unload(bp, 1); - if (rc) { - BNX2X_ERR("bnx2x_nic_unload failed: %d\n", rc); - return rc; - } - bnx2x_set_power_state(bp, PCI_D3hot); + bnx2x_nic_unload(bp, 1); + + if (!CHIP_REV_IS_SLOW(bp)) + bnx2x_set_power_state(bp, PCI_D3hot); return 0; } @@ -9620,14 +9622,18 @@ static void bnx2x_reset_task(struct work_struct *work) if (!netif_running(bp->dev)) return; - bp->in_reset_task = 1; + rtnl_lock(); - bnx2x_netif_stop(bp); + if (bp->state != BNX2X_STATE_OPEN) { + DP(NETIF_MSG_TX_ERR, "state is %x, returning\n", bp->state); + goto reset_task_exit; + } bnx2x_nic_unload(bp, 0); bnx2x_nic_load(bp, 0); - bp->in_reset_task = 0; +reset_task_exit: + rtnl_unlock(); } static int __devinit bnx2x_init_board(struct pci_dev *pdev, @@ -9708,8 +9714,6 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev, spin_lock_init(&bp->phy_lock); - bp->in_reset_task = 0; - INIT_WORK(&bp->reset_task, bnx2x_reset_task); INIT_WORK(&bp->sp_task, bnx2x_sp_task); @@ -9916,10 +9920,16 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, static void __devexit bnx2x_remove_one(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); - struct bnx2x *bp = netdev_priv(dev); + struct bnx2x *bp; + + if (!dev) { + /* we get here if init_one() fails */ + printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n"); + return; + } + + bp = netdev_priv(dev); - flush_scheduled_work(); - /*tasklet_kill(&bp->sp_task);*/ unregister_netdev(dev); if (bp->regview) @@ -9937,34 +9947,43 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev) static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *dev = pci_get_drvdata(pdev); - struct bnx2x *bp = netdev_priv(dev); - int rc; + struct bnx2x *bp; + + if (!dev) + return 0; if (!netif_running(dev)) return 0; - rc = bnx2x_nic_unload(bp, 0); - if (!rc) - return rc; + bp = netdev_priv(dev); + + bnx2x_nic_unload(bp, 0); netif_device_detach(dev); - pci_save_state(pdev); + pci_save_state(pdev); bnx2x_set_power_state(bp, pci_choose_state(pdev, state)); + return 0; } static int bnx2x_resume(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); - struct bnx2x *bp = netdev_priv(dev); + struct bnx2x *bp; int rc; + if (!dev) { + printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n"); + return -ENODEV; + } + if (!netif_running(dev)) return 0; - pci_restore_state(pdev); + bp = netdev_priv(dev); + pci_restore_state(pdev); bnx2x_set_power_state(bp, PCI_D0); netif_device_attach(dev); diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index e2a36e850fc2..6a86afbc7525 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -545,8 +545,6 @@ struct bnx2x { spinlock_t phy_lock; struct work_struct reset_task; - u16 in_reset_task; - struct work_struct sp_task; struct timer_list timer; @@ -560,7 +558,6 @@ struct bnx2x { #define CHIP_ID(bp) (((bp)->chip_id) & 0xfffffff0) #define CHIP_NUM(bp) (((bp)->chip_id) & 0xffff0000) -#define CHIP_NUM_5710 0x57100000 #define CHIP_REV(bp) (((bp)->chip_id) & 0x0000f000) #define CHIP_REV_Ax 0x00000000 -- cgit v1.2.2 From e8717a47266b1527e620ddf262613b9d010bbbe7 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:57:29 -0800 Subject: [BNX2X]: Prevent PCI queue overflow Limit traffic through an internal queue to prevent overflow. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x_init.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index 04f93bff2ef4..dcaecc53bdb1 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -1,6 +1,6 @@ /* bnx2x_init.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -409,7 +409,7 @@ static void bnx2x_init_pxp(struct bnx2x *bp) pci_read_config_word(bp->pdev, bp->pcie_cap + PCI_EXP_DEVCTL, (u16 *)&val); - DP(NETIF_MSG_HW, "read 0x%x from devctl\n", val); + DP(NETIF_MSG_HW, "read 0x%x from devctl\n", (u16)val); w_order = ((val & PCI_EXP_DEVCTL_PAYLOAD) >> 5); r_order = ((val & PCI_EXP_DEVCTL_READRQ) >> 12); @@ -472,10 +472,14 @@ static void bnx2x_init_pxp(struct bnx2x *bp) REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val); REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order); - REG_WR(bp, PXP2_REG_RQ_WR_MBS0 + 8, w_order); + REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order); REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order); - REG_WR(bp, PXP2_REG_RQ_RD_MBS0 + 8, r_order); + REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order); + if (r_order == MAX_RD_ORD) + REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00); + + REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order)); REG_WR(bp, PXP2_REG_WR_DMAE_TH, (128 << w_order)/16); } -- cgit v1.2.2 From 96fc1784007bf194399759e9b7d9c836c7bbda2a Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:57:55 -0800 Subject: [BNX2X]: Fix Xmit bugs Several endianity corrections in start_xmit() Fixed TSO bug where packets were missing the TCP flags. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 12 +++++++----- drivers/net/bnx2x.h | 3 +++ 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index d21599cfeb89..2db0427b0c92 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -9269,7 +9269,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) /* for now NS flag is not used in Linux */ pbd->global_data = (len | - ((skb->protocol == ETH_P_8021Q) << + ((skb->protocol == ntohs(ETH_P_8021Q)) << ETH_TX_PARSE_BD_LLC_SNAP_EN_SHIFT)); pbd->ip_hlen = ip_hdrlen(skb) / 2; pbd->total_hlen = cpu_to_le16(len + pbd->ip_hlen); @@ -9278,7 +9278,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_TCP_CSUM; - pbd->tcp_flags = htonl(tcp_flag_word(skb)) & 0xFFFF; + pbd->tcp_flags = pbd_tcp_flags(skb); pbd->total_hlen += cpu_to_le16(tcp_hdrlen(skb) / 2); pbd->tcp_pseudo_csum = swab16(th->check); @@ -9322,7 +9322,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) if (skb_shinfo(skb)->gso_size && (skb->len > (bp->dev->mtu + ETH_HLEN))) { - int hlen = 2 * le32_to_cpu(pbd->total_hlen); + int hlen = 2 * le16_to_cpu(pbd->total_hlen); DP(NETIF_MSG_TX_QUEUED, "TSO packet len %d hlen %d total len %d tso size %d\n", @@ -9439,9 +9439,11 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %u bd %d\n", nbd, bd_prod); - fp->hw_tx_prods->bds_prod += cpu_to_le16(nbd); + fp->hw_tx_prods->bds_prod = + cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + nbd); mb(); /* FW restriction: must not reorder writing nbd and packets */ - fp->hw_tx_prods->packets_prod += cpu_to_le32(1); + fp->hw_tx_prods->packets_prod = + cpu_to_le32(le32_to_cpu(fp->hw_tx_prods->packets_prod) + 1); DOORBELL(bp, fp_index, 0); mmiowb(); diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 6a86afbc7525..4f0c0d31e7c1 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -869,6 +869,9 @@ struct bnx2x { #define PCICFG_LINK_SPEED_SHIFT 16 #define BMAC_CONTROL_RX_ENABLE 2 + +#define pbd_tcp_flags(skb) (ntohl(tcp_flag_word(tcp_hdr(skb)))>>16 & 0xff) + /* stuff added to make the code fit 80Col */ #define TPA_TYPE_START ETH_FAST_PATH_RX_CQE_START_FLG -- cgit v1.2.2 From 8d84a44096a34a5015fef8293fe1bf70068bfdd0 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:58:49 -0800 Subject: [BNX2X]: update version, remove CVS strings Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 2db0427b0c92..8af142ccf373 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -63,8 +63,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "0.40.15" -#define DRV_MODULE_RELDATE "$DateTime: 2007/11/15 07:28:37 $" +#define DRV_MODULE_VERSION "1.40.22" +#define DRV_MODULE_RELDATE "2007/11/27" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung. */ @@ -78,7 +78,6 @@ MODULE_AUTHOR("Eliezer Tamir "); MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); -MODULE_INFO(cvs_version, "$Revision: #404 $"); static int use_inta; static int poll; -- cgit v1.2.2 From 4d9d2cb026c756318965e2d9874d4695d9ebd4f6 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:59:10 -0800 Subject: [BNX2X]: add bnx2x to MAINTAINERS Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2333255417f4..33d99dcac691 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -982,6 +982,12 @@ M: mchan@broadcom.com L: netdev@vger.kernel.org S: Supported +BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER +P: Eliezer Tamir +M: eliezert@broadcom.com +L: netdev@vger.kernel.org +S: Supported + BROADCOM TG3 GIGABIT ETHERNET DRIVER P: Michael Chan M: mchan@broadcom.com -- cgit v1.2.2 From ed2b5b474e853fe2f9a9988f2871051291779d90 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 12:53:32 -0800 Subject: [APPLETALK]: Use proc_create() to setup ->proc_fops first As Davem mentioned in his recently patch (d9595a7b9c777d45a74774f1428c263a0a47f4c0) that the procfs visibility should occur after the ->proc_fops are setup. And also, Alexey provide proc_create() to make sure that ->proc_fops is setup before gluing PDE to main tree. We use proc_create(). Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/appletalk/atalk_proc.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/net/appletalk/atalk_proc.c b/net/appletalk/atalk_proc.c index 8e8dcfd532db..162199a2d74f 100644 --- a/net/appletalk/atalk_proc.c +++ b/net/appletalk/atalk_proc.c @@ -283,25 +283,24 @@ int __init atalk_proc_init(void) goto out; atalk_proc_dir->owner = THIS_MODULE; - p = create_proc_entry("interface", S_IRUGO, atalk_proc_dir); + p = proc_create("interface", S_IRUGO, atalk_proc_dir, + &atalk_seq_interface_fops); if (!p) goto out_interface; - p->proc_fops = &atalk_seq_interface_fops; - p = create_proc_entry("route", S_IRUGO, atalk_proc_dir); + p = proc_create("route", S_IRUGO, atalk_proc_dir, + &atalk_seq_route_fops); if (!p) goto out_route; - p->proc_fops = &atalk_seq_route_fops; - p = create_proc_entry("socket", S_IRUGO, atalk_proc_dir); + p = proc_create("socket", S_IRUGO, atalk_proc_dir, + &atalk_seq_socket_fops); if (!p) goto out_socket; - p->proc_fops = &atalk_seq_socket_fops; - p = create_proc_entry("arp", S_IRUGO, atalk_proc_dir); + p = proc_create("arp", S_IRUGO, atalk_proc_dir, &atalk_seq_arp_fops); if (!p) goto out_arp; - p->proc_fops = &atalk_seq_arp_fops; rc = 0; out: -- cgit v1.2.2 From 15efbe763978d7cc327d824d9e8f8f9e525dd40d Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 15 Feb 2008 09:53:59 -0500 Subject: [SCTP]: Clean up naming conventions of sctp protocol/address family registration I noticed while looking into some odd behavior in sctp, that the variable name sctp_pf_inet6_specific was used twice to represent two different pieces of data (its both a structure name and a pointer to that type of structure), which is confusing to say the least, and potentially dangerous depending on the variable scope. This patch cleans that up, and makes the protocol and address family registration names in SCTP more regular, increasing readability. Signed-off-by: Neil Horman Signed-off-by: Vlad Yasevich ipv6.c | 12 ++++++------ protocol.c | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) --- net/sctp/ipv6.c | 12 ++++++------ net/sctp/protocol.c | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index 4d7ec961ae1d..87f940587d5f 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -966,7 +966,7 @@ static struct inet6_protocol sctpv6_protocol = { .flags = INET6_PROTO_NOPOLICY | INET6_PROTO_FINAL, }; -static struct sctp_af sctp_ipv6_specific = { +static struct sctp_af sctp_af_inet6 = { .sa_family = AF_INET6, .sctp_xmit = sctp_v6_xmit, .setsockopt = ipv6_setsockopt, @@ -998,7 +998,7 @@ static struct sctp_af sctp_ipv6_specific = { #endif }; -static struct sctp_pf sctp_pf_inet6_specific = { +static struct sctp_pf sctp_pf_inet6 = { .event_msgname = sctp_inet6_event_msgname, .skb_msgname = sctp_inet6_skb_msgname, .af_supported = sctp_inet6_af_supported, @@ -1008,7 +1008,7 @@ static struct sctp_pf sctp_pf_inet6_specific = { .supported_addrs = sctp_inet6_supported_addrs, .create_accept_sk = sctp_v6_create_accept_sk, .addr_v4map = sctp_v6_addr_v4map, - .af = &sctp_ipv6_specific, + .af = &sctp_af_inet6, }; /* Initialize IPv6 support and register with socket layer. */ @@ -1017,10 +1017,10 @@ int sctp_v6_init(void) int rc; /* Register the SCTP specific PF_INET6 functions. */ - sctp_register_pf(&sctp_pf_inet6_specific, PF_INET6); + sctp_register_pf(&sctp_pf_inet6, PF_INET6); /* Register the SCTP specific AF_INET6 functions. */ - sctp_register_af(&sctp_ipv6_specific); + sctp_register_af(&sctp_af_inet6); rc = proto_register(&sctpv6_prot, 1); if (rc) @@ -1051,7 +1051,7 @@ void sctp_v6_exit(void) inet6_unregister_protosw(&sctpv6_seqpacket_protosw); inet6_unregister_protosw(&sctpv6_stream_protosw); proto_unregister(&sctpv6_prot); - list_del(&sctp_ipv6_specific.list); + list_del(&sctp_af_inet6.list); } /* Unregister with inet6 layer. */ diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 22a16571499c..688546dccd82 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -832,7 +832,7 @@ static inline int sctp_v4_xmit(struct sk_buff *skb, return ip_queue_xmit(skb, ipfragok); } -static struct sctp_af sctp_ipv4_specific; +static struct sctp_af sctp_af_inet; static struct sctp_pf sctp_pf_inet = { .event_msgname = sctp_inet_event_msgname, @@ -844,7 +844,7 @@ static struct sctp_pf sctp_pf_inet = { .supported_addrs = sctp_inet_supported_addrs, .create_accept_sk = sctp_v4_create_accept_sk, .addr_v4map = sctp_v4_addr_v4map, - .af = &sctp_ipv4_specific, + .af = &sctp_af_inet }; /* Notifier for inetaddr addition/deletion events. */ @@ -906,7 +906,7 @@ static struct net_protocol sctp_protocol = { }; /* IPv4 address related functions. */ -static struct sctp_af sctp_ipv4_specific = { +static struct sctp_af sctp_af_inet = { .sa_family = AF_INET, .sctp_xmit = sctp_v4_xmit, .setsockopt = ip_setsockopt, @@ -1192,7 +1192,7 @@ SCTP_STATIC __init int sctp_init(void) sctp_sysctl_register(); INIT_LIST_HEAD(&sctp_address_families); - sctp_register_af(&sctp_ipv4_specific); + sctp_register_af(&sctp_af_inet); status = proto_register(&sctp_prot, 1); if (status) @@ -1249,7 +1249,7 @@ err_v6_init: proto_unregister(&sctp_prot); err_proto_register: sctp_sysctl_unregister(); - list_del(&sctp_ipv4_specific.list); + list_del(&sctp_af_inet.list); free_pages((unsigned long)sctp_port_hashtable, get_order(sctp_port_hashsize * sizeof(struct sctp_bind_hashbucket))); @@ -1299,7 +1299,7 @@ SCTP_STATIC __exit void sctp_exit(void) inet_unregister_protosw(&sctp_seqpacket_protosw); sctp_sysctl_unregister(); - list_del(&sctp_ipv4_specific.list); + list_del(&sctp_af_inet.list); free_pages((unsigned long)sctp_assoc_hashtable, get_order(sctp_assoc_hashsize * -- cgit v1.2.2 From b40db6846847e82daf175641987df29324c425fa Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 27 Feb 2008 14:40:37 -0500 Subject: [SCTP]: Incorrect length was used in SCTP_*_AUTH_CHUNKS socket option The chunks are stored inside a parameter structure in the kernel and when we copy them to the user, we need to account for the parameter header. Signed-off-by: Vlad Yasevich --- net/sctp/socket.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 44797ad88a05..848df21dc6c1 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -5070,6 +5070,7 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len, struct sctp_authchunks val; struct sctp_association *asoc; struct sctp_chunks_param *ch; + u32 num_chunks; char __user *to; if (len <= sizeof(struct sctp_authchunks)) @@ -5086,10 +5087,11 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len, ch = asoc->peer.peer_chunks; /* See if the user provided enough room for all the data */ - if (len < ntohs(ch->param_hdr.length)) + num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t); + if (len < num_chunks) return -EINVAL; - len = ntohs(ch->param_hdr.length); + len = num_chunks; if (put_user(len, optlen)) return -EFAULT; if (copy_to_user(to, ch->chunks, len)) @@ -5105,6 +5107,7 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len, struct sctp_authchunks val; struct sctp_association *asoc; struct sctp_chunks_param *ch; + u32 num_chunks; char __user *to; if (len <= sizeof(struct sctp_authchunks)) @@ -5123,10 +5126,11 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len, else ch = sctp_sk(sk)->ep->auth_chunk_list; - if (len < ntohs(ch->param_hdr.length)) + num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t); + if (len < num_chunks) return -EINVAL; - len = ntohs(ch->param_hdr.length); + len = num_chunks; if (put_user(len, optlen)) return -EFAULT; if (copy_to_user(to, ch->chunks, len)) -- cgit v1.2.2 From 7e8616d8e7731b026019d9af7cc9914b8bb42bc7 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 27 Feb 2008 16:04:52 -0500 Subject: [SCTP]: Update AUTH structures to match declarations in draft-16. The new SCTP socket api (draft 16) updates the AUTH API structures. We never exported these since we knew they would change. Update the rest to match the draft. Signed-off-by: Vlad Yasevich --- include/net/sctp/user.h | 10 ++++++---- net/sctp/auth.c | 4 ++-- net/sctp/socket.c | 6 +++++- 3 files changed, 13 insertions(+), 7 deletions(-) diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h index 9462d6ae2f37..9619b9d35c9e 100644 --- a/include/net/sctp/user.h +++ b/include/net/sctp/user.h @@ -411,6 +411,7 @@ struct sctp_event_subscribe { __u8 sctp_shutdown_event; __u8 sctp_partial_delivery_event; __u8 sctp_adaptation_layer_event; + __u8 sctp_authentication_event; }; /* @@ -587,7 +588,7 @@ struct sctp_authchunk { * endpoint requires the peer to use. */ struct sctp_hmacalgo { - __u16 shmac_num_idents; + __u32 shmac_num_idents; __u16 shmac_idents[]; }; @@ -600,7 +601,7 @@ struct sctp_hmacalgo { struct sctp_authkey { sctp_assoc_t sca_assoc_id; __u16 sca_keynumber; - __u16 sca_keylen; + __u16 sca_keylength; __u8 sca_key[]; }; @@ -693,8 +694,9 @@ struct sctp_status { * the peer requires to be received authenticated only. */ struct sctp_authchunks { - sctp_assoc_t gauth_assoc_id; - uint8_t gauth_chunks[]; + sctp_assoc_t gauth_assoc_id; + __u32 gauth_number_of_chunks; + uint8_t gauth_chunks[]; }; /* diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 8bb79f281774..675a5c3e68a6 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -838,11 +838,11 @@ int sctp_auth_set_key(struct sctp_endpoint *ep, } /* Create a new key data based on the info passed in */ - key = sctp_auth_create_key(auth_key->sca_keylen, GFP_KERNEL); + key = sctp_auth_create_key(auth_key->sca_keylength, GFP_KERNEL); if (!key) goto nomem; - memcpy(key->data, &auth_key->sca_key[0], auth_key->sca_keylen); + memcpy(key->data, &auth_key->sca_key[0], auth_key->sca_keylength); /* If we are replacing, remove the old keys data from the * key id. If we are adding new key id, add it to the diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 848df21dc6c1..939892691a26 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1964,7 +1964,7 @@ static int sctp_setsockopt_disable_fragments(struct sock *sk, static int sctp_setsockopt_events(struct sock *sk, char __user *optval, int optlen) { - if (optlen != sizeof(struct sctp_event_subscribe)) + if (optlen > sizeof(struct sctp_event_subscribe)) return -EINVAL; if (copy_from_user(&sctp_sk(sk)->subscribe, optval, optlen)) return -EFAULT; @@ -5094,6 +5094,8 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len, len = num_chunks; if (put_user(len, optlen)) return -EFAULT; + if (put_user(num_chunks, &p->gauth_number_of_chunks)) + return -EFAULT; if (copy_to_user(to, ch->chunks, len)) return -EFAULT; @@ -5133,6 +5135,8 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len, len = num_chunks; if (put_user(len, optlen)) return -EFAULT; + if (put_user(num_chunks, &p->gauth_number_of_chunks)) + return -EFAULT; if (copy_to_user(to, ch->chunks, len)) return -EFAULT; -- cgit v1.2.2 From 16e297b35811c53288b35e15a5823fd8534c6d21 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 13:55:45 -0800 Subject: [ATM]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/atm/br2684.c | 4 ++-- net/atm/clip.c | 4 +--- net/atm/lec.c | 4 +--- net/atm/mpoa_proc.c | 3 +-- net/atm/proc.c | 8 ++++---- 5 files changed, 9 insertions(+), 14 deletions(-) diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 574d9a964176..1b228065e745 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -742,9 +742,9 @@ static int __init br2684_init(void) { #ifdef CONFIG_PROC_FS struct proc_dir_entry *p; - if ((p = create_proc_entry("br2684", 0, atm_proc_root)) == NULL) + p = proc_create("br2684", 0, atm_proc_root, &br2684_proc_ops); + if (p == NULL) return -ENOMEM; - p->proc_fops = &br2684_proc_ops; #endif register_atm_ioctl(&br2684_ioctl_ops); return 0; diff --git a/net/atm/clip.c b/net/atm/clip.c index 86b885ec1cbd..d30167c0b48e 100644 --- a/net/atm/clip.c +++ b/net/atm/clip.c @@ -962,9 +962,7 @@ static int __init atm_clip_init(void) { struct proc_dir_entry *p; - p = create_proc_entry("arp", S_IRUGO, atm_proc_root); - if (p) - p->proc_fops = &arp_seq_fops; + p = proc_create("arp", S_IRUGO, atm_proc_root, &arp_seq_fops); } #endif diff --git a/net/atm/lec.c b/net/atm/lec.c index 1a8c4c6c0cd0..0e450d12f035 100644 --- a/net/atm/lec.c +++ b/net/atm/lec.c @@ -1249,9 +1249,7 @@ static int __init lane_module_init(void) #ifdef CONFIG_PROC_FS struct proc_dir_entry *p; - p = create_proc_entry("lec", S_IRUGO, atm_proc_root); - if (p) - p->proc_fops = &lec_seq_fops; + p = proc_create("lec", S_IRUGO, atm_proc_root, &lec_seq_fops); #endif register_atm_ioctl(&lane_ioctl_ops); diff --git a/net/atm/mpoa_proc.c b/net/atm/mpoa_proc.c index 91f3ffc90dbd..4990541ef5da 100644 --- a/net/atm/mpoa_proc.c +++ b/net/atm/mpoa_proc.c @@ -276,12 +276,11 @@ int mpc_proc_init(void) { struct proc_dir_entry *p; - p = create_proc_entry(STAT_FILE_NAME, 0, atm_proc_root); + p = proc_create(STAT_FILE_NAME, 0, atm_proc_root, &mpc_file_operations); if (!p) { printk(KERN_ERR "Unable to initialize /proc/atm/%s\n", STAT_FILE_NAME); return -ENOMEM; } - p->proc_fops = &mpc_file_operations; p->owner = THIS_MODULE; return 0; } diff --git a/net/atm/proc.c b/net/atm/proc.c index 49125110bb8b..e9693aed7ef8 100644 --- a/net/atm/proc.c +++ b/net/atm/proc.c @@ -435,11 +435,11 @@ int atm_proc_dev_register(struct atm_dev *dev) goto err_out; sprintf(dev->proc_name,"%s:%d",dev->type, dev->number); - dev->proc_entry = create_proc_entry(dev->proc_name, 0, atm_proc_root); + dev->proc_entry = proc_create(dev->proc_name, 0, atm_proc_root, + &proc_atm_dev_ops); if (!dev->proc_entry) goto err_free_name; dev->proc_entry->data = dev; - dev->proc_entry->proc_fops = &proc_atm_dev_ops; dev->proc_entry->owner = THIS_MODULE; return 0; err_free_name: @@ -492,10 +492,10 @@ int __init atm_proc_init(void) for (e = atm_proc_ents; e->name; e++) { struct proc_dir_entry *dirent; - dirent = create_proc_entry(e->name, S_IRUGO, atm_proc_root); + dirent = proc_create(e->name, S_IRUGO, + atm_proc_root, e->proc_fops); if (!dirent) goto err_out_remove; - dirent->proc_fops = e->proc_fops; dirent->owner = THIS_MODULE; e->dirent = dirent; } -- cgit v1.2.2 From 2ce8f047d5f3c0d782838bd2ecb6e4c440268e6d Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:00:59 -0800 Subject: [SUNRPC]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/sunrpc/cache.c | 14 ++++++-------- net/sunrpc/stats.c | 3 +-- 2 files changed, 7 insertions(+), 10 deletions(-) diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c index 636c8e04e0be..b5f2786251b9 100644 --- a/net/sunrpc/cache.c +++ b/net/sunrpc/cache.c @@ -316,31 +316,29 @@ static int create_cache_proc_entries(struct cache_detail *cd) cd->proc_ent->owner = cd->owner; cd->channel_ent = cd->content_ent = NULL; - p = create_proc_entry("flush", S_IFREG|S_IRUSR|S_IWUSR, cd->proc_ent); + p = proc_create("flush", S_IFREG|S_IRUSR|S_IWUSR, + cd->proc_ent, &cache_flush_operations); cd->flush_ent = p; if (p == NULL) goto out_nomem; - p->proc_fops = &cache_flush_operations; p->owner = cd->owner; p->data = cd; if (cd->cache_request || cd->cache_parse) { - p = create_proc_entry("channel", S_IFREG|S_IRUSR|S_IWUSR, - cd->proc_ent); + p = proc_create("channel", S_IFREG|S_IRUSR|S_IWUSR, + cd->proc_ent, &cache_file_operations); cd->channel_ent = p; if (p == NULL) goto out_nomem; - p->proc_fops = &cache_file_operations; p->owner = cd->owner; p->data = cd; } if (cd->cache_show) { - p = create_proc_entry("content", S_IFREG|S_IRUSR|S_IWUSR, - cd->proc_ent); + p = proc_create("content", S_IFREG|S_IRUSR|S_IWUSR, + cd->proc_ent, &content_file_operations); cd->content_ent = p; if (p == NULL) goto out_nomem; - p->proc_fops = &content_file_operations; p->owner = cd->owner; p->data = cd; } diff --git a/net/sunrpc/stats.c b/net/sunrpc/stats.c index 5a16875f5ac8..c6061a4346c8 100644 --- a/net/sunrpc/stats.c +++ b/net/sunrpc/stats.c @@ -229,9 +229,8 @@ do_register(const char *name, void *data, const struct file_operations *fops) rpc_proc_init(); dprintk("RPC: registering /proc/net/rpc/%s\n", name); - ent = create_proc_entry(name, 0, proc_net_rpc); + ent = proc_create(name, 0, proc_net_rpc, fops); if (ent) { - ent->proc_fops = fops; ent->data = data; } return ent; -- cgit v1.2.2 From 1e15dc981deb39056fa846fe55e1a1dbb175a98e Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:06:14 -0800 Subject: [IPX]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/ipx/ipx_proc.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/net/ipx/ipx_proc.c b/net/ipx/ipx_proc.c index d483a00dc427..5ed97ad0e2e3 100644 --- a/net/ipx/ipx_proc.c +++ b/net/ipx/ipx_proc.c @@ -358,22 +358,19 @@ int __init ipx_proc_init(void) if (!ipx_proc_dir) goto out; - p = create_proc_entry("interface", S_IRUGO, ipx_proc_dir); + p = proc_create("interface", S_IRUGO, + ipx_proc_dir, &ipx_seq_interface_fops); if (!p) goto out_interface; - p->proc_fops = &ipx_seq_interface_fops; - p = create_proc_entry("route", S_IRUGO, ipx_proc_dir); + p = proc_create("route", S_IRUGO, ipx_proc_dir, &ipx_seq_route_fops); if (!p) goto out_route; - p->proc_fops = &ipx_seq_route_fops; - p = create_proc_entry("socket", S_IRUGO, ipx_proc_dir); + p = proc_create("socket", S_IRUGO, ipx_proc_dir, &ipx_seq_socket_fops); if (!p) goto out_socket; - p->proc_fops = &ipx_seq_socket_fops; - rc = 0; out: return rc; -- cgit v1.2.2 From 7e0218099832d954d107f48de9e81bd521e16f24 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:08:54 -0800 Subject: [LLC]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/llc/llc_proc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/net/llc/llc_proc.c b/net/llc/llc_proc.c index cb34bc0518e8..48212c0a961c 100644 --- a/net/llc/llc_proc.c +++ b/net/llc/llc_proc.c @@ -239,18 +239,14 @@ int __init llc_proc_init(void) goto out; llc_proc_dir->owner = THIS_MODULE; - p = create_proc_entry("socket", S_IRUGO, llc_proc_dir); + p = proc_create("socket", S_IRUGO, llc_proc_dir, &llc_seq_socket_fops); if (!p) goto out_socket; - p->proc_fops = &llc_seq_socket_fops; - - p = create_proc_entry("core", S_IRUGO, llc_proc_dir); + p = proc_create("core", S_IRUGO, llc_proc_dir, &llc_seq_core_fops); if (!p) goto out_core; - p->proc_fops = &llc_seq_core_fops; - rc = 0; out: return rc; -- cgit v1.2.2 From 46ecf0b994715589b9f5f620beca4d6aaaa02028 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:10:51 -0800 Subject: [NEIGHBOUR]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/core/neighbour.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 2328acbd16cd..aef01533dfb6 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1389,10 +1389,10 @@ void neigh_table_init_no_netlink(struct neigh_table *tbl) panic("cannot create neighbour cache statistics"); #ifdef CONFIG_PROC_FS - tbl->pde = create_proc_entry(tbl->id, 0, init_net.proc_net_stat); + tbl->pde = proc_create(tbl->id, 0, init_net.proc_net_stat, + &neigh_stat_seq_fops); if (!tbl->pde) panic("cannot create neighbour proc dir entry"); - tbl->pde->proc_fops = &neigh_stat_seq_fops; tbl->pde->data = tbl; #endif -- cgit v1.2.2 From 25296d599ccc7e06af217329729e4d7154fa79a2 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:11:49 -0800 Subject: [PKTGEN]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/core/pktgen.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index bfcdfaebca5c..20e63b302ba6 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -3570,14 +3570,14 @@ static int pktgen_add_device(struct pktgen_thread *t, const char *ifname) if (err) goto out1; - pkt_dev->entry = create_proc_entry(ifname, 0600, pg_proc_dir); + pkt_dev->entry = proc_create(ifname, 0600, + pg_proc_dir, &pktgen_if_fops); if (!pkt_dev->entry) { printk(KERN_ERR "pktgen: cannot create %s/%s procfs entry.\n", PG_PROC_DIR, ifname); err = -EINVAL; goto out2; } - pkt_dev->entry->proc_fops = &pktgen_if_fops; pkt_dev->entry->data = pkt_dev; #ifdef CONFIG_XFRM pkt_dev->ipsmode = XFRM_MODE_TRANSPORT; @@ -3628,7 +3628,7 @@ static int __init pktgen_create_thread(int cpu) kthread_bind(p, cpu); t->tsk = p; - pe = create_proc_entry(t->tsk->comm, 0600, pg_proc_dir); + pe = proc_create(t->tsk->comm, 0600, pg_proc_dir, &pktgen_thread_fops); if (!pe) { printk(KERN_ERR "pktgen: cannot create %s/%s procfs entry.\n", PG_PROC_DIR, t->tsk->comm); @@ -3638,7 +3638,6 @@ static int __init pktgen_create_thread(int cpu) return -EINVAL; } - pe->proc_fops = &pktgen_thread_fops; pe->data = t; wake_up_process(p); @@ -3709,7 +3708,7 @@ static int __init pg_init(void) return -ENODEV; pg_proc_dir->owner = THIS_MODULE; - pe = create_proc_entry(PGCTRL, 0600, pg_proc_dir); + pe = proc_create(PGCTRL, 0600, pg_proc_dir, &pktgen_fops); if (pe == NULL) { printk(KERN_ERR "pktgen: ERROR: cannot create %s " "procfs entry.\n", PGCTRL); @@ -3717,7 +3716,6 @@ static int __init pg_init(void) return -EINVAL; } - pe->proc_fops = &pktgen_fops; pe->data = NULL; /* Register us to receive netdevice events */ -- cgit v1.2.2 From 160f17e345f5b50484d6cdc985b8686a05bf015d Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:13:16 -0800 Subject: [SCTP]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/sctp/objcnt.c | 5 ++--- net/sctp/proc.c | 4 +--- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/net/sctp/objcnt.c b/net/sctp/objcnt.c index 14e294e37626..cfeb07ea1b04 100644 --- a/net/sctp/objcnt.c +++ b/net/sctp/objcnt.c @@ -132,12 +132,11 @@ void sctp_dbg_objcnt_init(void) { struct proc_dir_entry *ent; - ent = create_proc_entry("sctp_dbg_objcnt", 0, proc_net_sctp); + ent = proc_create("sctp_dbg_objcnt", 0, + proc_net_sctp, &sctp_objcnt_ops); if (!ent) printk(KERN_WARNING "sctp_dbg_objcnt: Unable to create /proc entry.\n"); - else - ent->proc_fops = &sctp_objcnt_ops; } /* Cleanup the objcount entry in the proc filesystem. */ diff --git a/net/sctp/proc.c b/net/sctp/proc.c index 69bb5a63fd8b..9e214da82d9e 100644 --- a/net/sctp/proc.c +++ b/net/sctp/proc.c @@ -108,12 +108,10 @@ int __init sctp_snmp_proc_init(void) { struct proc_dir_entry *p; - p = create_proc_entry("snmp", S_IRUGO, proc_net_sctp); + p = proc_create("snmp", S_IRUGO, proc_net_sctp, &sctp_snmp_seq_fops); if (!p) return -ENOMEM; - p->proc_fops = &sctp_snmp_seq_fops; - return 0; } -- cgit v1.2.2 From 4436f4cbfac15acea139863e322ed2f9efb118d3 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:13:46 -0800 Subject: [IPV6]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/ipv6/proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index 35e502a72495..199ef379e501 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -217,12 +217,12 @@ int snmp6_register_dev(struct inet6_dev *idev) if (!proc_net_devsnmp6) return -ENOENT; - p = create_proc_entry(idev->dev->name, S_IRUGO, proc_net_devsnmp6); + p = proc_create(idev->dev->name, S_IRUGO, + proc_net_devsnmp6, &snmp6_seq_fops); if (!p) return -ENOMEM; p->data = idev; - p->proc_fops = &snmp6_seq_fops; idev->stats.proc_dir_entry = p; return 0; -- cgit v1.2.2 From 770207208e4374f013f6f49233d5c8c8df505e03 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:14:25 -0800 Subject: [IPV4]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/ipv4/route.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 525787b52b72..7b5e8e1d94be 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -542,12 +542,11 @@ static __init int ip_rt_proc_init(struct net *net) if (!pde) goto err1; - pde = create_proc_entry("rt_cache", S_IRUGO, net->proc_net_stat); + pde = proc_create("rt_cache", S_IRUGO, + net->proc_net_stat, &rt_cpu_seq_fops); if (!pde) goto err2; - pde->proc_fops = &rt_cpu_seq_fops; - #ifdef CONFIG_NET_CLS_ROUTE pde = create_proc_read_entry("rt_acct", 0, net->proc_net, ip_rt_acct_read, NULL); -- cgit v1.2.2 From d45fba3625249fada590a2eea09c38e755a3a2a7 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:14:58 -0800 Subject: [8021Q]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/8021q/vlanproc.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c index a0ec47925597..146cfb0e9882 100644 --- a/net/8021q/vlanproc.c +++ b/net/8021q/vlanproc.c @@ -161,11 +161,10 @@ int __init vlan_proc_init(void) if (!proc_vlan_dir) goto err; - proc_vlan_conf = create_proc_entry(name_conf, S_IFREG|S_IRUSR|S_IWUSR, - proc_vlan_dir); + proc_vlan_conf = proc_create(name_conf, S_IFREG|S_IRUSR|S_IWUSR, + proc_vlan_dir, &vlan_fops); if (!proc_vlan_conf) goto err; - proc_vlan_conf->proc_fops = &vlan_fops; return 0; err: @@ -182,13 +181,11 @@ int vlan_proc_add_dev(struct net_device *vlandev) { struct vlan_dev_info *dev_info = vlan_dev_info(vlandev); - dev_info->dent = create_proc_entry(vlandev->name, - S_IFREG|S_IRUSR|S_IWUSR, - proc_vlan_dir); + dev_info->dent = proc_create(vlandev->name, S_IFREG|S_IRUSR|S_IWUSR, + proc_vlan_dir, &vlandev_fops); if (!dev_info->dent) return -ENOBUFS; - dev_info->dent->proc_fops = &vlandev_fops; dev_info->dent->data = vlandev; return 0; } -- cgit v1.2.2 From 6d37a1581695fba42f4b51e3ff4c2871552cd6d7 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:15:56 -0800 Subject: [WANROUTER]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/wanrouter/wanproc.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/wanrouter/wanproc.c b/net/wanrouter/wanproc.c index f2e54c3f064e..5bebe40bf4e6 100644 --- a/net/wanrouter/wanproc.c +++ b/net/wanrouter/wanproc.c @@ -292,14 +292,12 @@ int __init wanrouter_proc_init(void) if (!proc_router) goto fail; - p = create_proc_entry("config", S_IRUGO, proc_router); + p = proc_create("config", S_IRUGO, proc_router, &config_fops); if (!p) goto fail_config; - p->proc_fops = &config_fops; - p = create_proc_entry("status", S_IRUGO, proc_router); + p = proc_create("status", S_IRUGO, proc_router, &status_fops); if (!p) goto fail_stat; - p->proc_fops = &status_fops; return 0; fail_stat: remove_proc_entry("config", proc_router); @@ -329,10 +327,10 @@ int wanrouter_proc_add(struct wan_device* wandev) if (wandev->magic != ROUTER_MAGIC) return -EINVAL; - wandev->dent = create_proc_entry(wandev->name, S_IRUGO, proc_router); + wandev->dent = proc_create(wandev->name, S_IRUGO, + proc_router, &wandev_fops); if (!wandev->dent) return -ENOMEM; - wandev->dent->proc_fops = &wandev_fops; wandev->dent->data = wandev; return 0; } -- cgit v1.2.2 From 2335f8ec27e125208d8d2d3e257a82862c4977d6 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:16:33 -0800 Subject: [X25]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/x25/x25_proc.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/x25/x25_proc.c b/net/x25/x25_proc.c index 3f52b09bed03..1afa44d25beb 100644 --- a/net/x25/x25_proc.c +++ b/net/x25/x25_proc.c @@ -312,20 +312,18 @@ int __init x25_proc_init(void) if (!x25_proc_dir) goto out; - p = create_proc_entry("route", S_IRUGO, x25_proc_dir); + p = proc_create("route", S_IRUGO, x25_proc_dir, &x25_seq_route_fops); if (!p) goto out_route; - p->proc_fops = &x25_seq_route_fops; - p = create_proc_entry("socket", S_IRUGO, x25_proc_dir); + p = proc_create("socket", S_IRUGO, x25_proc_dir, &x25_seq_socket_fops); if (!p) goto out_socket; - p->proc_fops = &x25_seq_socket_fops; - p = create_proc_entry("forward", S_IRUGO, x25_proc_dir); + p = proc_create("forward", S_IRUGO, x25_proc_dir, + &x25_seq_forward_fops); if (!p) goto out_forward; - p->proc_fops = &x25_seq_forward_fops; rc = 0; out: -- cgit v1.2.2