From f2c853bca542f5ac0b036377637192a74f2091c2 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Wed, 7 Sep 2005 22:44:48 +0200 Subject: [PATCH] sata_sis: Add support for SiS182 chipset This patch adds support for the SiS182 sata chipset. This is a minimalistic version of the patch from http://bugme.osdl.org/show_bug.cgi?id=4192. Basically, it add the PCI IDs and handles the change of the 2nd port adress register. Signed-Off-By: Arnaud Patard Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sis.c | 82 ++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 71 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 43af445b3ad2..7d1aaa99aaae 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -52,7 +52,10 @@ enum { /* PCI configuration registers */ SIS_GENCTL = 0x54, /* IDE General Control register */ SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */ - SIS_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ + SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ + SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */ + SIS_PMR = 0x90, /* port mapping register */ + SIS_PMR_COMBINED = 0x30, /* random bits */ SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */ @@ -67,6 +70,7 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static struct pci_device_id sis_pci_tbl[] = { { PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, { PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, + { PCI_VENDOR_ID_SI, 0x182, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, { } /* terminate list */ }; @@ -139,56 +143,94 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, sis_pci_tbl); MODULE_VERSION(DRV_VERSION); -static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg) +static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, int device) { unsigned int addr = SIS_SCR_BASE + (4 * sc_reg); - if (port_no) - addr += SIS_SATA1_OFS; + if (port_no) + if (device == 0x182) + addr += SIS182_SATA1_OFS; + else + addr += SIS180_SATA1_OFS; return addr; } static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg); - u32 val; + unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device); + u32 val, val2; + u8 pmr; if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */ return 0xffffffff; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + pci_read_config_dword(pdev, cfg_addr, &val); - return val; + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + pci_read_config_dword(pdev, cfg_addr+0x10, &val2); + + return val|val2; } static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr); + unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device); + u8 pmr; if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */ return; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + pci_write_config_dword(pdev, cfg_addr, val); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + pci_write_config_dword(pdev, cfg_addr+0x10, val); } static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) { + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u32 val,val2; + u8 pmr; + if (sc_reg > SCR_CONTROL) return 0xffffffffU; if (ap->flags & SIS_FLAG_CFGSCR) return sis_scr_cfg_read(ap, sc_reg); - return inl(ap->ioaddr.scr_addr + (sc_reg * 4)); + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + + val = inl(ap->ioaddr.scr_addr + (sc_reg * 4)); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); + + return val|val2; } static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u8 pmr; + if (sc_reg > SCR_CONTROL) return; + pci_read_config_byte(pdev, SIS_PMR, &pmr); + if (ap->flags & SIS_FLAG_CFGSCR) sis_scr_cfg_write(ap, sc_reg, val); - else + else { outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); + } } /* move to PCI layer, integrate w/ MSI stuff */ @@ -210,6 +252,8 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) u32 genctl; struct ata_port_info *ppi; int pci_dev_busy = 0; + u8 pmr; + u8 port2_start; rc = pci_enable_device(pdev); if (rc) @@ -251,11 +295,27 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->host_flags |= SIS_FLAG_CFGSCR; } + pci_read_config_byte(pdev, SIS_PMR, &pmr); + if (ent->device != 0x182) { + if ((pmr & SIS_PMR_COMBINED) == 0) { + printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n"); + port2_start=0x64; + } + else { + printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n"); + port2_start=0; + } + } + else { + printk(KERN_INFO "sata_sis: Detected SiS 182 chipset\n"); + port2_start = 0x20; + } + if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) { probe_ent->port[0].scr_addr = pci_resource_start(pdev, SIS_SCR_PCI_BAR); probe_ent->port[1].scr_addr = - pci_resource_start(pdev, SIS_SCR_PCI_BAR) + 64; + pci_resource_start(pdev, SIS_SCR_PCI_BAR) + port2_start; } pci_set_master(pdev); -- cgit v1.2.2 From 6a690df5c8b37d4a1c41df40770d42d44fac0e97 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Tue, 28 Jun 2005 17:30:38 -0700 Subject: [PATCH] scan all enabled ports on ata_piix ICH6 spec defines the PORT_ bits as: PORT_ENABLED (R/W): 0 = Disabled. The port is in the off state and cannot detect any devices. 1 = Enabled. The port can transition between the on, partial, and slumber states and can detect devices. PORT_PRESENT (R/O) The status of this bit may change at any time. This bit is cleared when the port is disabled via PORT_ENABLED. This bit is not cleared upon surprise removal of a device. So from a textual view it is not necessary that PORT_PRESENT _must_ be set, especially if a device detection has to be done anyway. And, in fact, this is the view that ACER has been taken with its new Laptops (e.g. Travelmate 4150). And the definition of PORT_ENABLED / PORT_PRESENT is mixed up, btw. Signed-off-by: Hannes Reinecke Signed-off-by: Jens Axboe Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index deec0cef88d9..5f8688529041 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -68,8 +68,8 @@ enum { PIIX_COMB_PATA_P0 = (1 << 1), PIIX_COMB = (1 << 2), /* combined mode enabled? */ - PIIX_PORT_PRESENT = (1 << 0), - PIIX_PORT_ENABLED = (1 << 4), + PIIX_PORT_ENABLED = (1 << 0), + PIIX_PORT_PRESENT = (1 << 4), PIIX_80C_PRI = (1 << 5) | (1 << 4), PIIX_80C_SEC = (1 << 7) | (1 << 6), @@ -377,7 +377,9 @@ static void piix_pata_phy_reset(struct ata_port *ap) * None (inherited from caller). * * RETURNS: - * Non-zero if device detected, zero otherwise. + * Non-zero if port is enabled, it may or may not have a device + * attached in that case (PRESENT bit would only be set if BIOS probe + * was done). Zero is returned if port is disabled. */ static int piix_sata_probe (struct ata_port *ap) { @@ -401,7 +403,7 @@ static int piix_sata_probe (struct ata_port *ap) */ for (i = 0; i < 4; i++) { - mask = (PIIX_PORT_PRESENT << i) | (PIIX_PORT_ENABLED << i); + mask = (PIIX_PORT_ENABLED << i); if ((orig_mask & mask) == mask) if (combined || (i == ap->hard_port_no)) -- cgit v1.2.2