From 048feec5548c0582ee96148c61b87cccbcb5f9be Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 11 Sep 2008 22:19:45 -0700 Subject: [SCSI] qla2xxx: Defer enablement of RISC interrupts until ISP initialization completes. Josip Rodin noted (http://article.gmane.org/gmane.linux.ports.sparc/10152) the driver oopsing during registration of an rport to the FC-transport layer with a backtrace indicating a dereferencing of an shost->shost_data equal to NULL. David Miller identified a small window in driver logic where this could happen: > Look at how the driver registers the IRQ handler before the host has > been registered with the SCSI layer. > > That leads to a window of time where the shost hasn't been setup > fully, yet ISRs can come in and trigger DPC thread events, such as > loop resyncs, which expect the transport area to be setup. > > But it won't be setup, because scsi_add_host() hasn't finished yet. > > Note that in Josip's crash log, we don't even see the > > qla_printk(KERN_INFO, ha, "\n" > " QLogic Fibre Channel HBA Driver: %s\n" > " QLogic %s - %s\n" > " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n", > ... > > message yet. > > Which means that the crash occurs between qla2x00_request_irqs() > and printing that message. Close this window by enabling RISC interrupts after the host has been registered with the SCSI midlayer. Reported-by: Josip Rodin Cc: Stable Tree Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 1 - drivers/scsi/qla2xxx/qla_os.c | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 45a3b93eed57..bf41887cdd65 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1834,7 +1834,6 @@ clear_risc_ints: WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT); } spin_unlock_irq(&ha->hardware_lock); - ha->isp_ops->enable_intrs(ha); fail: return ret; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 26afe44265c7..6d0f0e5f2827 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1740,6 +1740,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) if (ret) goto probe_failed; + ha->isp_ops->enable_intrs(ha); + scsi_scan_host(host); qla2x00_alloc_sysfs_attr(ha); -- cgit v1.2.2 From e1f4f59d1ab9ebac44830d6ae450fb358ac559d3 Mon Sep 17 00:00:00 2001 From: Sitsofe Wheeler Date: Tue, 16 Sep 2008 14:27:13 +0100 Subject: PCI: Fix pcie_aspm=force pcie_aspm=force did not work because aspm_force was being double negated leading to the sanity check failing. Moving a bracket should fix this. Acked-by: Alan Cox Signed-off-by: Sitsofe Wheeler Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aspm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 9a7c9e1408a4..851f5b83cdbc 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -527,7 +527,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) */ pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP, ®32); - if (!(reg32 & PCI_EXP_DEVCAP_RBER && !aspm_force)) { + if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) { printk("Pre-1.1 PCIe device detected, " "disable ASPM for %s. It can be enabled forcedly" " with 'pcie_aspm=force'\n", pci_name(pdev)); -- cgit v1.2.2 From cd72ad3f57c400baa2ddb78b4fc2781cf68ffb6f Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sun, 14 Sep 2008 11:52:44 -0400 Subject: Input: bcm5974 - switch back to normal mode when closing Staying in multi-touch mode after closing the device sometimes makes the keyboard drop keys or repeat keys irratically. The conjecture is that some internal buffer starts to overflow, resulting in undefined behavior. Switching back to normal mode when closing the device makes the problem go away. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/bcm5974.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 18f4d7f6ce6d..2998a6ac9ae4 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -351,8 +351,9 @@ static int report_tp_state(struct bcm5974 *dev, int size) #define BCM5974_WELLSPRING_MODE_REQUEST_VALUE 0x300 #define BCM5974_WELLSPRING_MODE_REQUEST_INDEX 0 #define BCM5974_WELLSPRING_MODE_VENDOR_VALUE 0x01 +#define BCM5974_WELLSPRING_MODE_NORMAL_VALUE 0x08 -static int bcm5974_wellspring_mode(struct bcm5974 *dev) +static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on) { char *data = kmalloc(8, GFP_KERNEL); int retval = 0, size; @@ -377,7 +378,9 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev) } /* apply the mode switch */ - data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE; + data[0] = on ? + BCM5974_WELLSPRING_MODE_VENDOR_VALUE : + BCM5974_WELLSPRING_MODE_NORMAL_VALUE; /* write configuration */ size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), @@ -392,7 +395,8 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev) goto out; } - dprintk(2, "bcm5974: switched to wellspring mode.\n"); + dprintk(2, "bcm5974: switched to %s mode.\n", + on ? "wellspring" : "normal"); out: kfree(data); @@ -481,7 +485,7 @@ exit: */ static int bcm5974_start_traffic(struct bcm5974 *dev) { - if (bcm5974_wellspring_mode(dev)) { + if (bcm5974_wellspring_mode(dev, true)) { dprintk(1, "bcm5974: mode switch failed\n"); goto error; } @@ -504,6 +508,7 @@ static void bcm5974_pause_traffic(struct bcm5974 *dev) { usb_kill_urb(dev->tp_urb); usb_kill_urb(dev->bt_urb); + bcm5974_wellspring_mode(dev, false); } /* -- cgit v1.2.2 From 1577e4b70a04cce39f296cc714da5ad5d272105a Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Tue, 16 Sep 2008 14:19:25 -0400 Subject: Input: jornada720_ts - fix build error ( LONG() usage ) This patch removes the usage of LONG() which is deprecated; we also replace BIT() with BIT_MASK(). signed-off-by: Kristoffer Ericson Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/jornada720_ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index 1aca108b1031..b7f1260738a6 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -119,8 +119,8 @@ static int __devinit jornada720_ts_probe(struct platform_device *pdev) input_dev->id.bustype = BUS_HOST; input_dev->dev.parent = &pdev->dev; - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); - input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0); input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0); -- cgit v1.2.2 From b08508c40adf3fd1330aabc4f37d3254179776c4 Mon Sep 17 00:00:00 2001 From: Greg KH Date: Tue, 26 Aug 2008 08:20:34 -0700 Subject: PCI: fix compiler warnings in pci_get_subsys() pci_get_subsys() changed in 2.6.26 so that the from pointer is modified when the call is being invoked, so fix up the 'const' marking of it that the compiler is complaining about. Reported-by: Rufus & Azrael Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jesse Barnes --- drivers/pci/search.c | 6 +++--- include/linux/pci.h | 8 ++++---- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 3b3b5f178797..4edfc4731bd4 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -162,7 +162,7 @@ EXPORT_SYMBOL(pci_find_slot); * time. */ struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, - const struct pci_dev *from) + struct pci_dev *from) { struct pci_dev *pdev; @@ -263,7 +263,7 @@ static int match_pci_dev_by_id(struct device *dev, void *data) * this file. */ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id, - const struct pci_dev *from) + struct pci_dev *from) { struct device *dev; struct device *dev_start = NULL; @@ -303,7 +303,7 @@ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id, */ struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device, unsigned int ss_vendor, unsigned int ss_device, - const struct pci_dev *from) + struct pci_dev *from) { struct pci_dev *pdev; struct pci_device_id *id; diff --git a/include/linux/pci.h b/include/linux/pci.h index c0e14008a3c2..98dc6243a706 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -534,7 +534,7 @@ extern void pci_sort_breadthfirst(void); #ifdef CONFIG_PCI_LEGACY struct pci_dev __deprecated *pci_find_device(unsigned int vendor, unsigned int device, - const struct pci_dev *from); + struct pci_dev *from); struct pci_dev __deprecated *pci_find_slot(unsigned int bus, unsigned int devfn); #endif /* CONFIG_PCI_LEGACY */ @@ -550,7 +550,7 @@ struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device, struct pci_dev *from); struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device, unsigned int ss_vendor, unsigned int ss_device, - const struct pci_dev *from); + struct pci_dev *from); struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn); struct pci_dev *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn); struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from); @@ -816,7 +816,7 @@ _PCI_NOP_ALL(write,) static inline struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, - const struct pci_dev *from) + struct pci_dev *from) { return NULL; } @@ -838,7 +838,7 @@ static inline struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device, unsigned int ss_vendor, unsigned int ss_device, - const struct pci_dev *from) + struct pci_dev *from) { return NULL; } -- cgit v1.2.2 From 0855f310dff76ae42c5aac32f600f8f692bbd23f Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Tue, 9 Sep 2008 11:17:29 +0200 Subject: UBIFS: create the name of the background thread in every case If the ubifs partition is mounted RO and then remounted RW we end up with no thread name in ubifs_remount_rw() and the thread appears nameless. Signed-off-by: Sebastian Siewior Signed-off-by: Artem Bityutskiy --- fs/ubifs/super.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 7562464ac83f..3f4902060c7a 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1024,14 +1024,13 @@ static int mount_ubifs(struct ubifs_info *c) goto out_dereg; } + sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, c->vi.vol_id); if (!mounted_read_only) { err = alloc_wbufs(c); if (err) goto out_cbuf; /* Create background thread */ - sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, - c->vi.vol_id); c->bgt = kthread_create(ubifs_bg_thread, c, c->bgt_name); if (!c->bgt) c->bgt = ERR_PTR(-EINVAL); -- cgit v1.2.2 From 6dcfac4f13d6b32fbaa60b64a23249999e66af8e Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 12 Sep 2008 12:27:47 +0300 Subject: UBIFS: TNC / GC race fixes - update GC sequence number if any nodes may have been moved even if GC did not finish the LEB - don't ignore error return when reading Signed-off-by: Adrian Hunter Signed-off-by: Artem Bityutskiy --- fs/ubifs/gc.c | 14 +++++++++++--- fs/ubifs/tnc.c | 2 +- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c index 13f1019c859f..02aba36fe3d4 100644 --- a/fs/ubifs/gc.c +++ b/fs/ubifs/gc.c @@ -334,15 +334,15 @@ int ubifs_garbage_collect_leb(struct ubifs_info *c, struct ubifs_lprops *lp) err = move_nodes(c, sleb); if (err) - goto out; + goto out_inc_seq; err = gc_sync_wbufs(c); if (err) - goto out; + goto out_inc_seq; err = ubifs_change_one_lp(c, lnum, c->leb_size, 0, 0, 0, 0); if (err) - goto out; + goto out_inc_seq; /* Allow for races with TNC */ c->gced_lnum = lnum; @@ -369,6 +369,14 @@ int ubifs_garbage_collect_leb(struct ubifs_info *c, struct ubifs_lprops *lp) out: ubifs_scan_destroy(sleb); return err; + +out_inc_seq: + /* We may have moved at least some nodes so allow for races with TNC */ + c->gced_lnum = lnum; + smp_wmb(); + c->gc_seq += 1; + smp_wmb(); + goto out; } /** diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c index 7da209ab9378..7634c5970887 100644 --- a/fs/ubifs/tnc.c +++ b/fs/ubifs/tnc.c @@ -1476,7 +1476,7 @@ again: } err = fallible_read_node(c, key, &zbr, node); - if (maybe_leb_gced(c, zbr.lnum, gc_seq1)) { + if (err <= 0 || maybe_leb_gced(c, zbr.lnum, gc_seq1)) { /* * The node may have been GC'ed out from under us so try again * while keeping the TNC mutex locked. -- cgit v1.2.2 From 6e14968c869cd30e236bb626dd0c16421d2a658d Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 17 Sep 2008 10:52:07 +0300 Subject: UBIFS: remove incorrect assert The assert was not valid because one of the variables 'taken_empty_lebs' has transient values out of sync with the other variables. Signed-off-by: Adrian Hunter Signed-off-by: Artem Bityutskiy --- fs/ubifs/find.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c index e045c8b55423..47814cde2407 100644 --- a/fs/ubifs/find.c +++ b/fs/ubifs/find.c @@ -507,7 +507,6 @@ int ubifs_find_free_space(struct ubifs_info *c, int min_space, int *free, rsvd_idx_lebs = 0; lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt - c->lst.taken_empty_lebs; - ubifs_assert(lebs + c->lst.idx_lebs >= c->min_idx_lebs); if (rsvd_idx_lebs < lebs) /* * OK to allocate an empty LEB, but we still don't want to go -- cgit v1.2.2 From 7424bac82ff3bd956ea04101550e01bdae17284d Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 17 Sep 2008 22:09:41 +0400 Subject: UBIFS: fix printk format warnings fs/ubifs/dir.c:428: warning: format '%llu' expects type 'long long unsigned int', but argument 5 has type 'long unsigned int' fs/ubifs/debug.c:541: warning: format '%llu' expects type 'long long unsigned int', but argument 2 has type 'long unsigned int' Signed-off-by: Alexander Beregalov Signed-off-by: Artem Bityutskiy --- fs/ubifs/debug.c | 2 +- fs/ubifs/dir.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c index b9cb77473758..d7f7645779f2 100644 --- a/fs/ubifs/debug.c +++ b/fs/ubifs/debug.c @@ -538,7 +538,7 @@ void dbg_dump_node(const struct ubifs_info *c, const void *node) printk(KERN_DEBUG "\t%d orphan inode numbers:\n", n); for (i = 0; i < n; i++) printk(KERN_DEBUG "\t ino %llu\n", - le64_to_cpu(orph->inos[i])); + (unsigned long long)le64_to_cpu(orph->inos[i])); break; } default: diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index 2b267c9a1806..526c01ec8003 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -426,7 +426,7 @@ static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) while (1) { dbg_gen("feed '%s', ino %llu, new f_pos %#x", - dent->name, le64_to_cpu(dent->inum), + dent->name, (unsigned long long)le64_to_cpu(dent->inum), key_hash_flash(c, &dent->key)); ubifs_assert(dent->ch.sqnum > ubifs_inode(dir)->creat_sqnum); -- cgit v1.2.2 From ee2fa7435b6dddf1ca119f298ad0100cf50c0397 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 17 Sep 2008 13:47:25 +0200 Subject: AMD IOMMU: set iommu sunc flag after command queuing The iommu->need_sync flag must be set after the command is queued to avoid race conditions. Signed-off-by: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 69b4d060b21c..a96d8c049a88 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -140,6 +140,7 @@ static int iommu_completion_wait(struct amd_iommu *iommu) static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid) { struct iommu_cmd cmd; + int ret; BUG_ON(iommu == NULL); @@ -147,9 +148,11 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid) CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY); cmd.data[0] = devid; + ret = iommu_queue_command(iommu, &cmd); + iommu->need_sync = 1; - return iommu_queue_command(iommu, &cmd); + return ret; } /* @@ -159,6 +162,7 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, u64 address, u16 domid, int pde, int s) { struct iommu_cmd cmd; + int ret; memset(&cmd, 0, sizeof(cmd)); address &= PAGE_MASK; @@ -171,9 +175,11 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, if (pde) /* PDE bit - we wan't flush everything not only the PTEs */ cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK; + ret = iommu_queue_command(iommu, &cmd); + iommu->need_sync = 1; - return iommu_queue_command(iommu, &cmd); + return ret; } /* -- cgit v1.2.2 From 7e4f88da7bf1887563f70bd5edbbd0479e31dc12 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 17 Sep 2008 14:19:15 +0200 Subject: AMD IOMMU: protect completion wait loop with iommu lock The unlocked polling of the ComWaitInt bit in the IOMMU completion wait path is racy. Protect it with the iommu lock. Signed-off-by: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index a96d8c049a88..042fdc27bc92 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -101,10 +101,10 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) */ static int iommu_completion_wait(struct amd_iommu *iommu) { - int ret, ready = 0; + int ret = 0, ready = 0; unsigned status = 0; struct iommu_cmd cmd; - unsigned long i = 0; + unsigned long flags, i = 0; memset(&cmd, 0, sizeof(cmd)); cmd.data[0] = CMD_COMPL_WAIT_INT_MASK; @@ -112,10 +112,12 @@ static int iommu_completion_wait(struct amd_iommu *iommu) iommu->need_sync = 0; - ret = iommu_queue_command(iommu, &cmd); + spin_lock_irqsave(&iommu->lock, flags); + + ret = __iommu_queue_command(iommu, &cmd); if (ret) - return ret; + goto out; while (!ready && (i < EXIT_LOOP_COUNT)) { ++i; @@ -130,6 +132,8 @@ static int iommu_completion_wait(struct amd_iommu *iommu) if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit())) printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n"); +out: + spin_unlock_irqrestore(&iommu->lock, flags); return 0; } -- cgit v1.2.2 From 7ee766d8fba9dfd93bf3eca7a8d84a25404a68dc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 20 Sep 2008 22:00:40 -0700 Subject: sparc64: Fix disappearing PCI devices on e3500. Based upon a bug report by Meelis Roos. The OF device layer builds properties by matching bus types and applying 'range' properties as appropriate, up to the root. The match for "PCI" busses is looking at the 'device_type' property, and this does work %99 of the time. But on an E3500 system with a PCI QFE card, the DEC 21153 bridge sitting above the QFE network interface devices has a 'name' of "pci", but it completely lacks a 'device_type' property. So we don't match it as a PCI bus, and subsequently we end up with no resource values at all for the devices sitting under that DEC bridge. Signed-off-by: David S. Miller --- arch/sparc64/kernel/of_device.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c index f845f150f565..100ebd527499 100644 --- a/arch/sparc64/kernel/of_device.c +++ b/arch/sparc64/kernel/of_device.c @@ -169,7 +169,7 @@ static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long fla static int of_bus_pci_match(struct device_node *np) { - if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) { + if (!strcmp(np->name, "pci")) { const char *model = of_get_property(np, "model", NULL); if (model && !strcmp(model, "SUNW,simba")) @@ -200,7 +200,7 @@ static int of_bus_simba_match(struct device_node *np) /* Treat PCI busses lacking ranges property just like * simba. */ - if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) { + if (!strcmp(np->name, "pci")) { if (!of_find_property(np, "ranges", NULL)) return 1; } @@ -429,7 +429,7 @@ static int __init use_1to1_mapping(struct device_node *pp) * it lacks a ranges property, and this will include * cases like Simba. */ - if (!strcmp(pp->type, "pci") || !strcmp(pp->type, "pciex")) + if (!strcmp(pp->name, "pci")) return 0; return 1; @@ -714,8 +714,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op, break; } } else { - if (!strcmp(pp->type, "pci") || - !strcmp(pp->type, "pciex")) { + if (!strcmp(pp->name, "pci")) { unsigned int this_orig_irq = irq; irq = pci_irq_swizzle(dp, pp, irq); -- cgit v1.2.2 From ad55dcaff0e34269f86975ce2ea0da22e9eb74a1 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 20 Sep 2008 22:05:50 -0700 Subject: netdev: simple_tx_hash shouldn't hash inside fragments Currently simple_tx_hash is hashing inside of udp fragments. As a result packets are getting getting sent to all queues when they shouldn't be. This causes a serious performance regression which can be seen by sending UDP frames larger than mtu on multiqueue devices. This change will make it so that fragments are hashed only as IP datagrams w/o any protocol information. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- net/core/dev.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index e719ed29310f..e8eb2b478344 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -122,6 +122,7 @@ #include #include #include +#include #include #include #include @@ -1667,7 +1668,7 @@ static u16 simple_tx_hash(struct net_device *dev, struct sk_buff *skb) { u32 addr1, addr2, ports; u32 hash, ihl; - u8 ip_proto; + u8 ip_proto = 0; if (unlikely(!simple_tx_hashrnd_initialized)) { get_random_bytes(&simple_tx_hashrnd, 4); @@ -1676,7 +1677,8 @@ static u16 simple_tx_hash(struct net_device *dev, struct sk_buff *skb) switch (skb->protocol) { case __constant_htons(ETH_P_IP): - ip_proto = ip_hdr(skb)->protocol; + if (!(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET))) + ip_proto = ip_hdr(skb)->protocol; addr1 = ip_hdr(skb)->saddr; addr2 = ip_hdr(skb)->daddr; ihl = ip_hdr(skb)->ihl; -- cgit v1.2.2 From b61e06f258e50b25c38a73bea782bdb6876f0f70 Mon Sep 17 00:00:00 2001 From: Andrea Righi Date: Sat, 20 Sep 2008 18:02:27 +0200 Subject: x86, oprofile: BUG scheduling while atomic nmi_shutdown() calls unregister_die_notifier() from an atomic context after setting preempt_disable() via get_cpu_var(): [ 1049.404154] BUG: scheduling while atomic: oprofiled/7796/0x00000002 [ 1049.404171] INFO: lockdep is turned off. [ 1049.404176] Modules linked in: oprofile af_packet rfcomm l2cap kvm_intel kvm i915 drm acpi_cpufreq cpufreq_userspace cpufreq_conservative cpufreq_ondemand cpufreq_powersave freq_table container sbs sbshc dm_mod arc4 ecb cryptomgr aead snd_hda_intel crypto_blkcipher snd_pcm_oss crypto_algapi snd_pcm iwlagn iwlcore snd_timer iTCO_wdt led_class btusb iTCO_vendor_support snd psmouse bluetooth mac80211 soundcore cfg80211 snd_page_alloc intel_agp video output button battery ac dcdbas evdev ext3 jbd mbcache sg sd_mod piix ata_piix libata scsi_mod dock tg3 libphy ehci_hcd uhci_hcd usbcore thermal processor fan fuse [ 1049.404362] Pid: 7796, comm: oprofiled Not tainted 2.6.27-rc5-mm1 #30 [ 1049.404368] Call Trace: [ 1049.404384] [] thread_return+0x4a0/0x7d3 [ 1049.404396] [] generic_exec_single+0x52/0xe0 [ 1049.404405] [] generic_exec_single+0xda/0xe0 [ 1049.404414] [] smp_call_function_single+0x73/0x150 [ 1049.404423] [] schedule_timeout+0x95/0xd0 [ 1049.404430] [] wait_for_common+0x43/0x180 [ 1049.404438] [] wait_for_common+0x114/0x180 [ 1049.404448] [] default_wake_function+0x0/0x10 [ 1049.404457] [] synchronize_rcu+0x30/0x40 [ 1049.404463] [] wakeme_after_rcu+0x0/0x10 [ 1049.404472] [] _spin_unlock_irqrestore+0x40/0x80 [ 1049.404482] [] atomic_notifier_chain_unregister+0x3f/0x60 [ 1049.404501] [] nmi_shutdown+0x51/0x90 [oprofile] [ 1049.404517] [] oprofile_shutdown+0x34/0x70 [oprofile] [ 1049.404532] [] event_buffer_release+0xe/0x40 [oprofile] [ 1049.404543] [] __fput+0xcd/0x240 [ 1049.404551] [] filp_close+0x54/0x90 [ 1049.404560] [] put_files_struct+0xb1/0xd0 [ 1049.404568] [] do_exit+0x18f/0x930 [ 1049.404576] [] restore_args+0x0/0x30 [ 1049.404584] [] do_group_exit+0x36/0xa0 [ 1049.404592] [] system_call_fastpath+0x16/0x1b This can be easily triggered with 'opcontrol --shutdown'. Simply move get_cpu_var() above unregister_die_notifier(). Signed-off-by: Andrea Righi Acked-by: Robert Richter Signed-off-by: Ingo Molnar --- arch/x86/oprofile/nmi_int.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 0227694f7dab..8a5f1614a3d5 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -295,10 +295,12 @@ static void nmi_cpu_shutdown(void *dummy) static void nmi_shutdown(void) { - struct op_msrs *msrs = &get_cpu_var(cpu_msrs); + struct op_msrs *msrs; + nmi_enabled = 0; on_each_cpu(nmi_cpu_shutdown, NULL, 1); unregister_die_notifier(&profile_exceptions_nb); + msrs = &get_cpu_var(cpu_msrs); model->shutdown(msrs); free_msrs(); put_cpu_var(cpu_msrs); -- cgit v1.2.2 From b1132b3d874dcef296a63b46680a41b02de66bb4 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 19 Sep 2008 18:50:45 +0200 Subject: ALSA: ASoC: Fix at32-pcm build breakage with PM enabled s/PDC_PTCR/ATMEL_PDC_PTCR/ Signed-off-by: Haavard Skinnemoen Acked-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/at32/at32-pcm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/at32/at32-pcm.c b/sound/soc/at32/at32-pcm.c index 435f1daf177c..c83584f989a9 100644 --- a/sound/soc/at32/at32-pcm.c +++ b/sound/soc/at32/at32-pcm.c @@ -434,7 +434,8 @@ static int at32_pcm_suspend(struct platform_device *pdev, params = prtd->params; /* Disable the PDC and save the PDC registers */ - ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); @@ -464,7 +465,7 @@ static int at32_pcm_resume(struct platform_device *pdev, ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); - ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, params->mask->pdc_enable); return 0; } #else /* CONFIG_PM */ -- cgit v1.2.2 From cec5eb7be3a104fffd27ca967ee8e15a123050e2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 22 Sep 2008 15:58:14 +0100 Subject: pcmcia: Fix broken abuse of dev->driver_data PCMCIA abuses dev->private_data in the probe methods. Unfortunately it continues to abuse it after calling drv->probe() which leads to crashes and other nasties (such as bogus probes of multifunction devices) giving errors like pcmcia: registering new device pcmcia0.1 kernel: 0.1: GetNextTuple: No more items Extract the passed data before calling the driver probe function that way we don't blow up when the driver reuses dev->private_data as its right. As its close to the final release just move the hack so it works out, hopefully someone will be sufficiently embarrassed to produce a nice rework for 2.6.28. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/pcmcia/ds.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 4174d9656e35..34c83d3ca0fa 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -427,6 +427,18 @@ static int pcmcia_device_probe(struct device * dev) p_drv = to_pcmcia_drv(dev->driver); s = p_dev->socket; + /* The PCMCIA code passes the match data in via dev->driver_data + * which is an ugly hack. Once the driver probe is called it may + * and often will overwrite the match data so we must save it first + * + * handle pseudo multifunction devices: + * there are at most two pseudo multifunction devices. + * if we're matching against the first, schedule a + * call which will then check whether there are two + * pseudo devices, and if not, add the second one. + */ + did = p_dev->dev.driver_data; + ds_dbg(1, "trying to bind %s to %s\n", p_dev->dev.bus_id, p_drv->drv.name); @@ -455,21 +467,14 @@ static int pcmcia_device_probe(struct device * dev) goto put_module; } - /* handle pseudo multifunction devices: - * there are at most two pseudo multifunction devices. - * if we're matching against the first, schedule a - * call which will then check whether there are two - * pseudo devices, and if not, add the second one. - */ - did = p_dev->dev.driver_data; if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) && (p_dev->socket->device_count == 1) && (p_dev->device_no == 0)) pcmcia_add_device_later(p_dev->socket, 0); - put_module: +put_module: if (ret) module_put(p_drv->owner); - put_dev: +put_dev: if (ret) put_device(dev); return (ret); -- cgit v1.2.2 From d0be7cc7688d0cc2e4daf952c43b5ce86e5c8a1d Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Wed, 17 Sep 2008 12:39:49 +0530 Subject: ath9k: connectivity is lost after Group rekeying is done Connectivtiy is lost after Group rekeying is done. The keytype maintained by ath9k is reset when group key is updated. Though sc_keytype can be reset only for broadcast key the proper fix would be to use mac80211 provided key type from txinfo during xmit and get rid of sc_keytype from ath9k ath_softc. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Senthil Balasubramanian Tested-by: Steven Noonan Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.h | 1 - drivers/net/wireless/ath9k/main.c | 3 --- drivers/net/wireless/ath9k/xmit.c | 6 +++--- 3 files changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 4ee695b76b88..2f84093331ee 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -974,7 +974,6 @@ struct ath_softc { u32 sc_keymax; /* size of key cache */ DECLARE_BITMAP(sc_keymap, ATH_KEYMAX); /* key use bit map */ u8 sc_splitmic; /* split TKIP MIC keys */ - int sc_keytype; /* RX */ struct list_head sc_rxbuf; diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 99badf1404c3..099719649c98 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -206,8 +206,6 @@ static int ath_key_config(struct ath_softc *sc, if (!ret) return -EIO; - if (mac) - sc->sc_keytype = hk.kv_type; return 0; } @@ -778,7 +776,6 @@ static int ath9k_set_key(struct ieee80211_hw *hw, case DISABLE_KEY: ath_key_delete(sc, key); clear_bit(key->keyidx, sc->sc_keymap); - sc->sc_keytype = ATH9K_CIPHER_CLR; break; default: ret = -EINVAL; diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 550129f717e2..8b332e11a656 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -315,11 +315,11 @@ static int ath_tx_prepare(struct ath_softc *sc, txctl->keyix = tx_info->control.hw_key->hw_key_idx; txctl->frmlen += tx_info->control.icv_len; - if (sc->sc_keytype == ATH9K_CIPHER_WEP) + if (tx_info->control.hw_key->alg == ALG_WEP) txctl->keytype = ATH9K_KEY_TYPE_WEP; - else if (sc->sc_keytype == ATH9K_CIPHER_TKIP) + else if (tx_info->control.hw_key->alg == ALG_TKIP) txctl->keytype = ATH9K_KEY_TYPE_TKIP; - else if (sc->sc_keytype == ATH9K_CIPHER_AES_CCM) + else if (tx_info->control.hw_key->alg == ALG_CCMP) txctl->keytype = ATH9K_KEY_TYPE_AES; } -- cgit v1.2.2 From 5d89945e6ec44494285cb8de85d4f43d4647b740 Mon Sep 17 00:00:00 2001 From: "born.into.silence@gmail.com" Date: Fri, 19 Sep 2008 16:47:06 -0700 Subject: wireless: zd1211rw: add device ID fix wifi dongle "trust nw-3100" akpm: taken from http://bugzilla.kernel.org/show_bug.cgi?id=11587 I bought the wifi dongle trust nw-3100 wich is in fact a zd1211rw. Its hardware id was missing in the sources, adding it made it work flawlessly. Cc: Daniel Drake Cc: Ulrich Kunitz Cc: Johannes Berg Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index da8b7433e3a6..a60ae86bd5c9 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -58,6 +58,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x129b, 0x1666), .driver_info = DEVICE_ZD1211 }, { USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 }, /* ZD1211B */ { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, -- cgit v1.2.2 From 06f95ea8988513b172080c419e4be8826c55a318 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 16 Sep 2008 18:25:33 -0600 Subject: [IA64] Ski simulator doesn't need check_sal_cache_flush Peter Chubb reported that commit 3463a93def55c309f3c0d0a8aaf216be3be42d64 (Update check_sal_cache_flush to use platform_send_ipi()) broke Ski because it does not implement IPIs. Tony Luck suggested we just #ifndef out the call (since the simulator does not have the SAL bug that this code is attempting to detect and workaround) Signed-off-by: Alex Chiang Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index c27d5b2c182b..de636b215677 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -616,7 +616,9 @@ setup_arch (char **cmdline_p) ia64_mca_init(); platform_setup(cmdline_p); +#ifndef CONFIG_IA64_HP_SIM check_sal_cache_flush(); +#endif paging_init(); } -- cgit v1.2.2 From d3758f87f39c5b072dde74c55bfb988262a3a45c Mon Sep 17 00:00:00 2001 From: Jay Lan Date: Mon, 22 Sep 2008 14:21:19 -0700 Subject: [IA64] kexec fails on systems with blocks of uncached memory Currently a memory segment in memory map with attribute of EFI_MEMORY_UC is denoted as "System RAM" in /proc/iomem, while memory of attribute (EFI_MEMORY_WB|EFI_MEMORY_UC) is also labeled the same. The kexec utility then includes uncached memory as part of vmcore. The kdump kernel MCA'ed when it tries to save the vmcore to a disk. A normal "cached" access may cause MCAs. This patch would label memory with attribute of EFI_MEMORY_UC only as "Uncached RAM" so that kexec would know not to include it in the vmcore. I will submit a separate kexec-tools patch to the kexec list. Signed-off-by: Jay Lan Acked-by: Simon Horman Signed-off-by: Tony Luck --- arch/ia64/kernel/efi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index d45f215bc8fc..51b75cea7018 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -1232,9 +1232,10 @@ efi_initialize_iomem_resources(struct resource *code_resource, if (md->attribute & EFI_MEMORY_WP) { name = "System ROM"; flags |= IORESOURCE_READONLY; - } else { + } else if (md->attribute == EFI_MEMORY_UC) + name = "Uncached RAM"; + else name = "System RAM"; - } break; case EFI_ACPI_MEMORY_NVS: -- cgit v1.2.2 From 6115e8557a75b5f24b56ed46c60dffef7e7fa992 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Mon, 22 Sep 2008 14:22:39 +0530 Subject: ath9k: Fix IRQ nobody cared issue with ath9k IRQs should be disabled before calling free_irq. Also flush pending IRQs. Pasted the kernel log message for reference. kernel: irq 17: nobody cared (try booting with the "irqpoll" option) kernel: [] __report_bad_irq+0x2e/0x6f kernel: [] note_interrupt+0x1b5/0x207 kernel: [] ? handle_IRQ_event+0x21/0x48 kernel: [] handle_fasteoi_irq+0x8e/0xad kernel: [] do_IRQ+0x6c/0x84 kernel: [] common_interrupt+0x23/0x28 kernel: [] ? acpi_idle_enter_simple+0x198/0x205 kernel: [] ? menu_select+0x5c/0x78 kernel: [] cpuidle_idle_call+0x59/0x89 kernel: [] cpu_idle+0xae/0xcf kernel: [] rest_init+0x4e/0x50 kernel: ======================= kernel: handlers: kernel: [] (ath_isr+0x0/0x13a [ath9k]) kernel: Disabling IRQ #17 Signed-off-by: Senthil Balasubramanian Tested-by: Steven Noonan Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.c | 4 ++-- drivers/net/wireless/ath9k/main.c | 9 ++++++++- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c index f6c45288d0e7..c04959357bda 100644 --- a/drivers/net/wireless/ath9k/core.c +++ b/drivers/net/wireless/ath9k/core.c @@ -294,8 +294,6 @@ static int ath_stop(struct ath_softc *sc) * hardware is gone (invalid). */ - if (!sc->sc_invalid) - ath9k_hw_set_interrupts(ah, 0); ath_draintxq(sc, false); if (!sc->sc_invalid) { ath_stoprecv(sc); @@ -1336,6 +1334,8 @@ void ath_deinit(struct ath_softc *sc) DPRINTF(sc, ATH_DBG_CONFIG, "%s\n", __func__); + tasklet_kill(&sc->intr_tq); + tasklet_kill(&sc->bcon_tasklet); ath_stop(sc); if (!sc->sc_invalid) ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 099719649c98..acebdf1d20a8 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -1411,10 +1411,17 @@ static void ath_pci_remove(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath_softc *sc = hw->priv; + enum ath9k_int status; - if (pdev->irq) + if (pdev->irq) { + ath9k_hw_set_interrupts(sc->sc_ah, 0); + /* clear the ISR */ + ath9k_hw_getisr(sc->sc_ah, &status); + sc->sc_invalid = 1; free_irq(pdev->irq, sc); + } ath_detach(sc); + pci_iounmap(pdev, sc->mem); pci_release_region(pdev, 0); pci_disable_device(pdev); -- cgit v1.2.2 From bdbef3d696ca83489eb653459b5a7a62ecf5596a Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 23 Sep 2008 00:16:35 +0200 Subject: [Bluetooth] Fix I/O errors on MacBooks with Broadcom chips The newer MacBooks contain a Broadcom based Bluetooth chip and to make this work properly, HCI_Reset must be send first. If HCI_Reset is not used then a lot of I/O errors show up and its triggers packets from non-existent ACL links. Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 6a010681ecf3..7665347238c7 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -104,6 +104,9 @@ static struct usb_device_id blacklist_table[] = { /* Broadcom BCM2046 */ { USB_DEVICE(0x0a5c, 0x2151), .driver_info = BTUSB_RESET }, + /* Apple MacBook Pro with Broadcom chip */ + { USB_DEVICE(0x05ac, 0x820f), .driver_info = BTUSB_RESET }, + /* IBM/Lenovo ThinkPad with Broadcom chip */ { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU }, { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU }, -- cgit v1.2.2 From e8c3c3d22b340a406a9aab1b7a9f436636c3de9d Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 23 Sep 2008 00:16:36 +0200 Subject: [Bluetooth] Fix wrong URB handling of btusb driver The btusb driver contains two typos that result in some buggy behavior, but the impact is not immediately visible. During initialization the submitting of interrupt URBs might fail and then make sure to remove the correct flag and not one of the hci_dev flags. When closing down the interface make sure to kill the anchor for the ISOC URBs and not kill the interrupt URBs twice. Also cancel any scheduled work when closing down the interface. Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 7665347238c7..b4756a6a3a68 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -519,7 +519,7 @@ static int btusb_open(struct hci_dev *hdev) err = btusb_submit_intr_urb(hdev); if (err < 0) { - clear_bit(BTUSB_INTR_RUNNING, &hdev->flags); + clear_bit(BTUSB_INTR_RUNNING, &data->flags); clear_bit(HCI_RUNNING, &hdev->flags); } @@ -535,8 +535,10 @@ static int btusb_close(struct hci_dev *hdev) if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) return 0; + cancel_work_sync(&data->work); + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); - usb_kill_anchored_urbs(&data->intr_anchor); + usb_kill_anchored_urbs(&data->isoc_anchor); clear_bit(BTUSB_BULK_RUNNING, &data->flags); usb_kill_anchored_urbs(&data->bulk_anchor); -- cgit v1.2.2 From 5fbcd260c2c52f78cd699f65e9c7af2e60b5380c Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 23 Sep 2008 00:16:36 +0200 Subject: [Bluetooth] Fix USB disconnect handling of btusb driver The USB transport specification for Bluetooth splits the ACL and SCO handling into two separate interfaces. In Linux it possible to probe and disconnect these interfaces independently. So make sure that both interfaces are tightly bound together. This fixes the suspend regression that some people have expierenced. Signed-off-by: Oliver Neukum Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index b4756a6a3a68..29ae99817c60 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -172,6 +172,7 @@ static struct usb_device_id blacklist_table[] = { struct btusb_data { struct hci_dev *hdev; struct usb_device *udev; + struct usb_interface *intf; struct usb_interface *isoc; spinlock_t lock; @@ -826,6 +827,7 @@ static int btusb_probe(struct usb_interface *intf, } data->udev = interface_to_usbdev(intf); + data->intf = intf; spin_lock_init(&data->lock); @@ -894,7 +896,7 @@ static int btusb_probe(struct usb_interface *intf, if (data->isoc) { err = usb_driver_claim_interface(&btusb_driver, - data->isoc, NULL); + data->isoc, data); if (err < 0) { hci_free_dev(hdev); kfree(data); @@ -926,13 +928,22 @@ static void btusb_disconnect(struct usb_interface *intf) hdev = data->hdev; - if (data->isoc) - usb_driver_release_interface(&btusb_driver, data->isoc); + __hci_dev_hold(hdev); - usb_set_intfdata(intf, NULL); + usb_set_intfdata(data->intf, NULL); + + if (data->isoc) + usb_set_intfdata(data->isoc, NULL); hci_unregister_dev(hdev); + if (intf == data->isoc) + usb_driver_release_interface(&btusb_driver, data->intf); + else if (data->isoc) + usb_driver_release_interface(&btusb_driver, data->isoc); + + __hci_dev_put(hdev); + hci_free_dev(hdev); } -- cgit v1.2.2 From 44b50e5a1af13c605d6c3b17a60e42eb0ee48d5f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 22 Sep 2008 15:42:24 -0700 Subject: sparc64: Fix missing devices due to PCI bridge test in of_create_pci_dev(). Just like in the arch/sparc64/kernel/of_device.c code fix commit 071d7f4c3b411beae08d27656e958070c43b78b4 ("sparc64: Fix SMP bootup with CONFIG_STACK_DEBUG or ftrace.") we have to check the OF device node name for "pci" instead of relying upon the 'device_type' property being there on all PCI bridges. Tested by Meelis Roos, and confirmed to make the PCI QFE devices reappear on the E3500 system. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 55096195458f..80dad76f8b81 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -425,7 +425,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev->current_state = 4; /* unknown power state */ dev->error_state = pci_channel_io_normal; - if (!strcmp(type, "pci") || !strcmp(type, "pciex")) { + if (!strcmp(node->name, "pci")) { /* a PCI-PCI bridge */ dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; dev->rom_base_reg = PCI_ROM_ADDRESS1; -- cgit v1.2.2 From 7f605ac00416d763c2d9681e378a75e7adbb06e8 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 13 Sep 2008 18:47:19 +0900 Subject: [WATCHDOG] ibmasr: remove unnecessary spin_unlock() __asr_toggle() is always called with asr_lock held. But there is unnecessary spin_unlock() call in __asr_toggle(). Signed-off-by: Akinobu Mita Signed-off-by: Wim Van Sebroeck Acked-by: Andrey Panin Signed-off-by: Andrew Morton --- drivers/watchdog/ibmasr.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c index b82405cfb4cd..89fcefcc8510 100644 --- a/drivers/watchdog/ibmasr.c +++ b/drivers/watchdog/ibmasr.c @@ -85,7 +85,6 @@ static void __asr_toggle(void) outb(reg & ~asr_toggle_mask, asr_write_addr); reg = inb(asr_read_addr); - spin_unlock(&asr_lock); } static void asr_toggle(void) -- cgit v1.2.2 From edf86c9b98b5162bed64a70f9424bd2dd58a717e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 16 Sep 2008 11:31:01 +0100 Subject: [WATCHDOG] wdt285: fix sparse warnings The wdt285.c watchdog driver is producing a number of sparse errors due to missing __user attributes to calls to put_user and copy_to_user, as well as in the prototype of watchdog_write. wdt285.c:144:21: warning: incorrect type in argument 1 (different address spaces) wdt285.c:144:21: expected void [noderef] *to wdt285.c:144:21: got void * wdt285.c:150:9: warning: incorrect type in initializer (different address spaces) wdt285.c:150:9: expected int const [noderef] *register __p wdt285.c:150:9: got int * wdt285.c:159:9: warning: incorrect type in initializer (different address spaces) wdt285.c:159:9: expected int const [noderef] *register __p wdt285.c:159:9: got int * wdt285.c:174:9: warning: incorrect type in initializer (different address spaces) wdt285.c:174:9: expected int const [noderef] *register __p wdt285.c:174:9: got int * wdt285.c:183:12: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) wdt285.c:183:12: expected int ( *write )( ... ) wdt285.c:183:12: got int ( static [toplevel] * )( ... ) Signed-off-by: Ben Dooks Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/wdt285.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c index db362c34958b..191ea6302107 100644 --- a/drivers/watchdog/wdt285.c +++ b/drivers/watchdog/wdt285.c @@ -115,8 +115,8 @@ static int watchdog_release(struct inode *inode, struct file *file) return 0; } -static ssize_t watchdog_write(struct file *file, const char *data, - size_t len, loff_t *ppos) +static ssize_t watchdog_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { /* * Refresh the timer. @@ -133,21 +133,22 @@ static const struct watchdog_info ident = { }; static long watchdog_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) + unsigned long arg) { unsigned int new_margin; + int __user *int_arg = (int __user *)arg; int ret = -ENOTTY; switch (cmd) { case WDIOC_GETSUPPORT: ret = 0; - if (copy_to_user((void *)arg, &ident, sizeof(ident))) + if (copy_to_user((void __user *)arg, &ident, sizeof(ident))) ret = -EFAULT; break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - ret = put_user(0, (int *)arg); + ret = put_user(0, int_arg); break; case WDIOC_KEEPALIVE: @@ -156,7 +157,7 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd, break; case WDIOC_SETTIMEOUT: - ret = get_user(new_margin, (int *)arg); + ret = get_user(new_margin, int_arg); if (ret) break; @@ -171,7 +172,7 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd, watchdog_ping(); /* Fall */ case WDIOC_GETTIMEOUT: - ret = put_user(soft_margin, (int *)arg); + ret = put_user(soft_margin, int_arg); break; } return ret; -- cgit v1.2.2 From 7275fc8c36dbad3a871f82b1f9f1f524688176ea Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 18 Sep 2008 12:26:15 +0000 Subject: [WATCHDOG] unlocked_ioctl changes Fix some drivers so that they use the unlocked_ioctl call. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/geodewdt.c | 6 +++--- drivers/watchdog/pnx4008_wdt.c | 4 ++-- drivers/watchdog/rc32434_wdt.c | 6 +++--- drivers/watchdog/rdc321x_wdt.c | 6 +++--- 4 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 614a5c7017b6..6799a6de66fe 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -130,8 +130,8 @@ static ssize_t geodewdt_write(struct file *file, const char __user *data, return len; } -static int geodewdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long geodewdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -198,7 +198,7 @@ static const struct file_operations geodewdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = geodewdt_write, - .ioctl = geodewdt_ioctl, + .unlocked_ioctl = geodewdt_ioctl, .open = geodewdt_open, .release = geodewdt_release, }; diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 0ed84162437b..6d9f3d4a9987 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -173,8 +173,8 @@ static const struct watchdog_info ident = { .identity = "PNX4008 Watchdog", }; -static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long pnx4008_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int ret = -ENOTTY; int time; diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c index 6756bcb009ed..c9c73b69c5e5 100644 --- a/drivers/watchdog/rc32434_wdt.c +++ b/drivers/watchdog/rc32434_wdt.c @@ -182,8 +182,8 @@ static ssize_t rc32434_wdt_write(struct file *file, const char *data, return 0; } -static int rc32434_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int new_timeout; @@ -242,7 +242,7 @@ static struct file_operations rc32434_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = rc32434_wdt_write, - .ioctl = rc32434_wdt_ioctl, + .unlocked_ioctl = rc32434_wdt_ioctl, .open = rc32434_wdt_open, .release = rc32434_wdt_release, }; diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c index 9108efa73e7d..bf92802f2bbe 100644 --- a/drivers/watchdog/rdc321x_wdt.c +++ b/drivers/watchdog/rdc321x_wdt.c @@ -144,8 +144,8 @@ static int rdc321x_wdt_release(struct inode *inode, struct file *file) return 0; } -static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long rdc321x_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; unsigned int value; @@ -204,7 +204,7 @@ static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf, static const struct file_operations rdc321x_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = rdc321x_wdt_ioctl, + .unlocked_ioctl = rdc321x_wdt_ioctl, .open = rdc321x_wdt_open, .write = rdc321x_wdt_write, .release = rdc321x_wdt_release, -- cgit v1.2.2 From 05e12e1c4c09cd35ac9f4e6af1e42b0036375d72 Mon Sep 17 00:00:00 2001 From: Ravikiran G Thirumalai Date: Mon, 22 Sep 2008 22:58:47 -0700 Subject: x86: fix 27-rc crash on vsmp due to paravirt during module load 27-rc fails to boot up if configured to use modules. Turns out vsmp_patch was marked __init, and vsmp_patch being the pvops 'patch' routine for vsmp, a call to vsmp_patch just turns out to execute a code page with series of 0xcc (POISON_FREE_INITMEM -- int3). vsmp_patch has been marked with __init ever since pvops, however, apply_paravirt can be called during module load causing calls to freed memory location. Since apply_paravirt can only be called during init/module load, make vsmp_patch with "__init_or_module" Signed-off-by: Ravikiran Thirumalai Signed-off-by: Ingo Molnar --- arch/x86/kernel/vsmp_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index 0c029e8959c7..7766d36983fc 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -61,7 +61,7 @@ static void vsmp_irq_enable(void) native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC)); } -static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf, +static unsigned __init_or_module vsmp_patch(u8 type, u16 clobbers, void *ibuf, unsigned long addr, unsigned len) { switch (type) { -- cgit v1.2.2 From fa748203175de7c08f2df80e5a0eeca40329b5e2 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Mon, 22 Sep 2008 14:55:45 -0700 Subject: sched: fix init_hrtick() section mismatch warning LD kernel/built-in.o WARNING: kernel/built-in.o(.text+0x326): Section mismatch in reference from the function init_hrtick() to the variable .cpuinit.data:hotplug_hrtick_nb.8 The function init_hrtick() references the variable __cpuinitdata hotplug_hrtick_nb.8. This is often because init_hrtick lacks a __cpuinitdata annotation or the annotation of hotplug_hrtick_nb.8 is wrong. Signed-off-by: Md.Rakib H. Mullick Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 98890807375b..13dd2db9fb2d 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1087,7 +1087,7 @@ hotplug_hrtick(struct notifier_block *nfb, unsigned long action, void *hcpu) return NOTIFY_DONE; } -static void init_hrtick(void) +static __init void init_hrtick(void) { hotcpu_notifier(hotplug_hrtick, 0); } -- cgit v1.2.2 From 6441402b1f173fa38e561d3cee7c01c32e5281ad Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 18:46:37 +0200 Subject: clockevents: prevent cpu online to interfere with nohz Impact: rare hang which can be triggered on CPU online. tick_do_timer_cpu keeps track of the CPU which updates jiffies via do_timer. The value -1 is used to signal, that currently no CPU is doing this. There are two cases, where the variable can have this state: boot: necessary for systems where the boot cpu id can be != 0 nohz long idle sleep: When the CPU which did the jiffies update last goes into a long idle sleep it drops the update jiffies duty so another CPU which is not idle can pick it up and keep jiffies going. Using the same value for both situations is wrong, as the CPU online code can see the -1 state when the timer of the newly onlined CPU is setup. The setup for a newly onlined CPU goes through periodic mode and can pick up the do_timer duty without being aware of the nohz / highres mode of the already running system. Use two separate states and make them constants to avoid magic numbers confusion. Signed-off-by: Thomas Gleixner --- kernel/time/tick-common.c | 7 ++++--- kernel/time/tick-internal.h | 4 ++++ kernel/time/tick-sched.c | 8 ++++---- 3 files changed, 12 insertions(+), 7 deletions(-) diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 019315ebf9de..b523d095decf 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -33,7 +33,7 @@ DEFINE_PER_CPU(struct tick_device, tick_cpu_device); */ ktime_t tick_next_period; ktime_t tick_period; -int tick_do_timer_cpu __read_mostly = -1; +int tick_do_timer_cpu __read_mostly = TICK_DO_TIMER_BOOT; DEFINE_SPINLOCK(tick_device_lock); /* @@ -148,7 +148,7 @@ static void tick_setup_device(struct tick_device *td, * If no cpu took the do_timer update, assign it to * this cpu: */ - if (tick_do_timer_cpu == -1) { + if (tick_do_timer_cpu == TICK_DO_TIMER_BOOT) { tick_do_timer_cpu = cpu; tick_next_period = ktime_get(); tick_period = ktime_set(0, NSEC_PER_SEC / HZ); @@ -300,7 +300,8 @@ static void tick_shutdown(unsigned int *cpup) if (*cpup == tick_do_timer_cpu) { int cpu = first_cpu(cpu_online_map); - tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu : -1; + tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu : + TICK_DO_TIMER_NONE; } spin_unlock_irqrestore(&tick_device_lock, flags); } diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index 6e9db9734aa6..e18014fadf95 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -1,6 +1,10 @@ /* * tick internal variable and functions used by low/high res code */ + +#define TICK_DO_TIMER_NONE -1 +#define TICK_DO_TIMER_BOOT -2 + DECLARE_PER_CPU(struct tick_device, tick_cpu_device); extern spinlock_t tick_device_lock; extern ktime_t tick_next_period; diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index a87b0468568b..31a14e8caac1 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -221,7 +221,7 @@ void tick_nohz_stop_sched_tick(int inidle) */ if (unlikely(!cpu_online(cpu))) { if (cpu == tick_do_timer_cpu) - tick_do_timer_cpu = -1; + tick_do_timer_cpu = TICK_DO_TIMER_NONE; } if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) @@ -303,7 +303,7 @@ void tick_nohz_stop_sched_tick(int inidle) * invoked. */ if (cpu == tick_do_timer_cpu) - tick_do_timer_cpu = -1; + tick_do_timer_cpu = TICK_DO_TIMER_NONE; ts->idle_sleeps++; @@ -468,7 +468,7 @@ static void tick_nohz_handler(struct clock_event_device *dev) * this duty, then the jiffies update is still serialized by * xtime_lock. */ - if (unlikely(tick_do_timer_cpu == -1)) + if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE)) tick_do_timer_cpu = cpu; /* Check, if the jiffies need an update */ @@ -570,7 +570,7 @@ static enum hrtimer_restart tick_sched_timer(struct hrtimer *timer) * this duty, then the jiffies update is still serialized by * xtime_lock. */ - if (unlikely(tick_do_timer_cpu == -1)) + if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE)) tick_do_timer_cpu = cpu; #endif -- cgit v1.2.2 From 4faac97d44ac27bdbb010a9c3597401a8f89341f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 18:54:29 +0200 Subject: x86: prevent stale state of c1e_mask across CPU offline/online Impact: hang which happens across CPU offline/online on AMD C1E systems. When a CPU goes offline then the corresponding bit in the broadcast mask is cleared. For AMD C1E enabled CPUs we do not reenable the broadcast when the CPU comes online again as we do not clear the corresponding bit in the c1e_mask, which keeps track which CPUs have been switched to broadcast already. So on those !$@#& machines we never switch back to broadcasting after a CPU offline/online cycle. Clear the bit when the CPU plays dead. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process.c | 11 ++++++++--- arch/x86/kernel/process_32.c | 1 + arch/x86/kernel/process_64.c | 2 ++ include/asm-x86/idle.h | 2 ++ 4 files changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 7fc4d5b0a6a0..2e2247117f6e 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -246,6 +246,14 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) return 1; } +static cpumask_t c1e_mask = CPU_MASK_NONE; +static int c1e_detected; + +void c1e_remove_cpu(int cpu) +{ + cpu_clear(cpu, c1e_mask); +} + /* * C1E aware idle routine. We check for C1E active in the interrupt * pending message MSR. If we detect C1E, then we handle it the same @@ -253,9 +261,6 @@ static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) */ static void c1e_idle(void) { - static cpumask_t c1e_mask = CPU_MASK_NONE; - static int c1e_detected; - if (need_resched()) return; diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 3b7a1ddcc0bc..4b3cfdf54216 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -88,6 +88,7 @@ static void cpu_exit_clear(void) cpu_clear(cpu, cpu_callin_map); numa_remove_cpu(cpu); + c1e_remove_cpu(cpu); } /* We don't actually take CPU down, just spin without interrupts. */ diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 71553b664e2a..e12e0e4dd256 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -93,6 +93,8 @@ DECLARE_PER_CPU(int, cpu_state); static inline void play_dead(void) { idle_task_exit(); + c1e_remove_cpu(raw_smp_processor_id()); + mb(); /* Ack it */ __get_cpu_var(cpu_state) = CPU_DEAD; diff --git a/include/asm-x86/idle.h b/include/asm-x86/idle.h index d240e5b30a45..cbb649123612 100644 --- a/include/asm-x86/idle.h +++ b/include/asm-x86/idle.h @@ -10,4 +10,6 @@ void idle_notifier_register(struct notifier_block *n); void enter_idle(void); void exit_idle(void); +void c1e_remove_cpu(int cpu); + #endif -- cgit v1.2.2 From 49d670fb8dd62d3ed4e3ed2513538ea65b051aed Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 18:56:01 +0200 Subject: clockevents: prevent stale tick_next_period for onlining CPUs Impact: possible hang on CPU onlining in timer one shot mode. The tick_next_period variable is only used during boot on nohz/highres enabled systems, but for CPU onlining it needs to be maintained when the per cpu clock events device operates in one shot mode. Signed-off-by: Thomas Gleixner --- kernel/time/tick-sched.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 31a14e8caac1..39019b3f7621 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -75,6 +75,9 @@ static void tick_do_update_jiffies64(ktime_t now) incr * ticks); } do_timer(++ticks); + + /* Keep the tick_next_period variable up to date */ + tick_next_period = ktime_add(last_jiffies_update, tick_period); } write_sequnlock(&xtime_lock); } -- cgit v1.2.2 From 302745699c1b675b5d2a1af87271de10e4d96b6a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 19:02:25 +0200 Subject: clockevents: check broadcast device not tick device Impact: Possible hang on CPU online observed on AMD C1E machines. The broadcast setup code looks at the mode of the tick device to determine whether it needs to be shut down or setup. This is wrong when the broadcast mode is set to one shot already. This can happen when a CPU is brought online as it goes through the periodic setup first. The problem went unnoticed as sane systems do not call into that code before the switch to one shot for the clock event device happens. The AMD C1E idle routine switches over immediately and thereby shuts down the just setup device before the first interrupt happens. Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index f1f3eee28113..e2b66d1c8ca5 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -235,7 +235,7 @@ static void tick_do_broadcast_on_off(void *why) case CLOCK_EVT_NOTIFY_BROADCAST_FORCE: if (!cpu_isset(cpu, tick_broadcast_mask)) { cpu_set(cpu, tick_broadcast_mask); - if (td->mode == TICKDEV_MODE_PERIODIC) + if (bc->mode == TICKDEV_MODE_PERIODIC) clockevents_shutdown(dev); } if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE) @@ -245,7 +245,7 @@ static void tick_do_broadcast_on_off(void *why) if (!tick_broadcast_force && cpu_isset(cpu, tick_broadcast_mask)) { cpu_clear(cpu, tick_broadcast_mask); - if (td->mode == TICKDEV_MODE_PERIODIC) + if (bc->mode == TICKDEV_MODE_PERIODIC) tick_setup_periodic(dev, 0); } break; -- cgit v1.2.2 From 27ce4cb4a0c7cf59b9a9952266883862f2e4c99f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 19:04:02 +0200 Subject: clockevents: prevent mode mismatch on cpu online Impact: timer hang on CPU online observed on AMD C1E systems When a CPU is brought online then the broadcast machinery can be in the one shot state already. Check this and setup the timer device of the new CPU in one shot mode so the broadcast code can pick up the next_event value correctly. Another AMD C1E oddity, as we switch to broadcast immediately and not after the full bring up via the ACPI cpu idle code. Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 8 ++++++++ kernel/time/tick-common.c | 3 ++- kernel/time/tick-internal.h | 2 ++ 3 files changed, 12 insertions(+), 1 deletion(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index e2b66d1c8ca5..bd7034542399 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -575,4 +575,12 @@ void tick_shutdown_broadcast_oneshot(unsigned int *cpup) spin_unlock_irqrestore(&tick_broadcast_lock, flags); } +/* + * Check, whether the broadcast device is in one shot mode + */ +int tick_broadcast_oneshot_active(void) +{ + return tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT; +} + #endif diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index b523d095decf..df12434b43ca 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -109,7 +109,8 @@ void tick_setup_periodic(struct clock_event_device *dev, int broadcast) if (!tick_device_is_functional(dev)) return; - if (dev->features & CLOCK_EVT_FEAT_PERIODIC) { + if ((dev->features & CLOCK_EVT_FEAT_PERIODIC) && + !tick_broadcast_oneshot_active()) { clockevents_set_mode(dev, CLOCK_EVT_MODE_PERIODIC); } else { unsigned long seq; diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index e18014fadf95..55c3f4be6077 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -35,6 +35,7 @@ extern void tick_broadcast_oneshot_control(unsigned long reason); extern void tick_broadcast_switch_to_oneshot(void); extern void tick_shutdown_broadcast_oneshot(unsigned int *cpup); extern int tick_resume_broadcast_oneshot(struct clock_event_device *bc); +extern int tick_broadcast_oneshot_active(void); # else /* BROADCAST */ static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { @@ -43,6 +44,7 @@ static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc) static inline void tick_broadcast_oneshot_control(unsigned long reason) { } static inline void tick_broadcast_switch_to_oneshot(void) { } static inline void tick_shutdown_broadcast_oneshot(unsigned int *cpup) { } +static inline int tick_broadcast_oneshot_active(void) { return 0; } # endif /* !BROADCAST */ #else /* !ONESHOT */ -- cgit v1.2.2 From a8d6829044901a67732904be5f1eacdf8539604f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 22 Sep 2008 19:02:25 +0200 Subject: x86: prevent C-states hang on AMD C1E enabled machines Impact: System hang when AMD C1E machines switch into C2/C3 AMD C1E enabled systems do not work with normal ACPI C-states even if the BIOS is advertising them. Limit the C-states to C1 for the ACPI processor idle code. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process.c | 1 + include/asm-x86/acpi.h | 2 ++ include/asm-x86/cpufeature.h | 1 + 3 files changed, 4 insertions(+) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 2e2247117f6e..d8c2a299bfe5 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -272,6 +272,7 @@ static void c1e_idle(void) c1e_detected = 1; mark_tsc_unstable("TSC halt in C1E"); printk(KERN_INFO "System has C1E enabled\n"); + set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E); } } diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h index 635d764dc13e..35d1743b57ac 100644 --- a/include/asm-x86/acpi.h +++ b/include/asm-x86/acpi.h @@ -140,6 +140,8 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate) boot_cpu_data.x86_model <= 0x05 && boot_cpu_data.x86_mask < 0x0A) return 1; + else if (boot_cpu_has(X86_FEATURE_AMDC1E)) + return 1; else return max_cstate; } diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 9489283a4bcf..cfcfb0a806ba 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -81,6 +81,7 @@ #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */ #define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */ #define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */ +#define X86_FEATURE_AMDC1E (3*32+21) /* AMD C1E detected */ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ #define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */ -- cgit v1.2.2 From 09bfeea13cea843fb03eaa96b5d891fa0abdcc90 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Thu, 18 Sep 2008 21:12:10 +0200 Subject: x86: c1e_idle: don't mark TSC unstable if CPU has invariant TSC Impact: Functional TSC is marked unstable on AMD family 0x10 and 0x11 CPUs. This would be wrong because for those CPUs "invariant TSC" means: "The TSC counts at the same rate in all P-states, all C states, S0, or S1" (See "Processor BIOS and Kernel Developer's Guides" for those CPUs.) [ tglx: Changed C1E to AMD C1E in the printks to avoid confusion with Intel C1E ] Signed-off-by: Andreas Herrmann Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index d8c2a299bfe5..876e91890777 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -270,8 +270,9 @@ static void c1e_idle(void) rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); if (lo & K8_INTP_C1E_ACTIVE_MASK) { c1e_detected = 1; - mark_tsc_unstable("TSC halt in C1E"); - printk(KERN_INFO "System has C1E enabled\n"); + if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) + mark_tsc_unstable("TSC halt in AMD C1E"); + printk(KERN_INFO "System has AMD C1E enabled\n"); set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E); } } -- cgit v1.2.2 From f8e256c687eb53850685747757c8d75e58756e15 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 23 Sep 2008 13:00:57 +0200 Subject: timers: fix build error in !oneshot case MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kernel/time/tick-common.c: In function ‘tick_setup_periodic’: kernel/time/tick-common.c:113: error: implicit declaration of function ‘tick_broadcast_oneshot_active’ Signed-off-by: Ingo Molnar --- kernel/time/tick-internal.h | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index 55c3f4be6077..469248782c23 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -74,6 +74,7 @@ static inline int tick_resume_broadcast_oneshot(struct clock_event_device *bc) { return 0; } +static inline int tick_broadcast_oneshot_active(void) { return 0; } #endif /* !TICK_ONESHOT */ /* -- cgit v1.2.2 From b0b8daf7849cc98217ca018fbe82c61cd2b735bc Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Thu, 18 Sep 2008 14:36:37 +0100 Subject: ALSA: ASoC: maintainers - update email address for Liam Girdwood This patch updates the maintainers email address for Liam Girdwood and adds a URL for the ASoC website. Signed-off-by: Liam Girdwood Signed-off-by: Takashi Iwai --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 28c69aaefcd9..657e0ffe2df5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3826,11 +3826,12 @@ S: Maintained SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT P: Liam Girdwood -M: liam.girdwood@wolfsonmicro.com +M: lrg@slimlogic.co.uk P: Mark Brown M: broonie@opensource.wolfsonmicro.com T: git opensource.wolfsonmicro.com/linux-2.6-asoc L: alsa-devel@alsa-project.org (subscribers-only) +W: http://alsa-project.org/main/index.php/ASoC S: Supported SPI SUBSYSTEM -- cgit v1.2.2 From 683f40d7e7eee06811db43cb4c45349eab0d539e Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 22 Sep 2008 13:57:41 -0700 Subject: ibmasr: remove unnecessary spin_unlock() __asr_toggle() is always called with asr_lock held. But there is unnecessary spin_unlock() call in __asr_toggle(). Signed-off-by: Akinobu Mita Cc: Wim Van Sebroeck Acked-by: Andrey Panin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/watchdog/ibmasr.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c index b82405cfb4cd..89fcefcc8510 100644 --- a/drivers/watchdog/ibmasr.c +++ b/drivers/watchdog/ibmasr.c @@ -85,7 +85,6 @@ static void __asr_toggle(void) outb(reg & ~asr_toggle_mask, asr_write_addr); reg = inb(asr_read_addr); - spin_unlock(&asr_lock); } static void asr_toggle(void) -- cgit v1.2.2 From c32a162fd420fe8dfb049db941b2438061047fcc Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Mon, 22 Sep 2008 13:57:43 -0700 Subject: smb.h: do not include linux/time.h in userspace linux/time.h conflicts with time.h from glibc It breaks building smbmount from samba. It's regression introduced by commit 76308da (" smb.h: uses struct timespec but didn't include linux/time.h"). Signed-off-by: Kirill A. Shutemov Cc: [2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/smb.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/smb.h b/include/linux/smb.h index caa43b2370cb..82fefddc5987 100644 --- a/include/linux/smb.h +++ b/include/linux/smb.h @@ -11,7 +11,9 @@ #include #include +#ifdef __KERNEL__ #include +#endif enum smb_protocol { SMB_PROTOCOL_NONE, -- cgit v1.2.2 From 39f00c087d31f668eb6eaf97508af22a32c5b1d9 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 22 Sep 2008 13:57:44 -0700 Subject: kernel-doc: allow structs whose members are all private Struct members may be marked as private by using /* private: */ before them, as noted in Documentation/kernel-doc-nano-HOWTO.txt Fix kernel-doc to handle structs whose members are all private; otherwise invalid XML is generated: xmlto: input does not validate (status 3) linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml:146: element variablelist: validity error : Element variablelist content does not follow the DTD, expecting ((title , titleabbrev?)? , varlistentry+), got () Document linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml does not validate make[1]: *** [Documentation/DocBook/debugobjects.html] Error 3 Signed-off-by: Randy Dunlap Reported-by: Roland McGrath Cc: Roland McGrath Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/kernel-doc | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/scripts/kernel-doc b/scripts/kernel-doc index ff787e6ff8ed..44ee94d2ab76 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -781,6 +781,7 @@ sub output_struct_xml(%) { print " \n"; print " Members\n"; + if ($#{$args{'parameterlist'}} >= 0) { print " \n"; foreach $parameter (@{$args{'parameterlist'}}) { ($parameter =~ /^#/) && next; @@ -798,6 +799,9 @@ sub output_struct_xml(%) { print " \n"; } print " \n"; + } else { + print " \n None\n \n"; + } print " \n"; output_section_xml(@_); -- cgit v1.2.2 From f9092f358bc2ec5367621478811f046f82873376 Mon Sep 17 00:00:00 2001 From: Jonathan Steel Date: Mon, 22 Sep 2008 13:57:45 -0700 Subject: kexec: fix segmentation fault in kimage_add_entry A segmentation fault can occur in kimage_add_entry in kexec.c when loading a kernel image into memory. The fault occurs because a page is requested by calling kimage_alloc_page with gfp_mask GFP_KERNEL and the function may actually return a page with gfp_mask GFP_HIGHUSER. The high mem page is returned because it was swapped with the kernel page due to the kernel page being a page that will shortly be copied to. This patch ensures that kimage_alloc_page returns a page that was created with the correct gfp flags. I have verified the change and fixed the whitespace damage of the original patch. Jonathan did a great job of tracking this down after he hit the problem. -- Eric Signed-off-by: Jonathan Steel Signed-off-by: Eric W. Biederman Acked-by: Simon Horman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kexec.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/kexec.c b/kernel/kexec.c index 59f3f0df35d4..aef265325cd3 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -753,8 +753,14 @@ static struct page *kimage_alloc_page(struct kimage *image, *old = addr | (*old & ~PAGE_MASK); /* The old page I have found cannot be a - * destination page, so return it. + * destination page, so return it if it's + * gfp_flags honor the ones passed in. */ + if (!(gfp_mask & __GFP_HIGHMEM) && + PageHighMem(old_page)) { + kimage_free_pages(old_page); + continue; + } addr = old_addr; page = old_page; break; -- cgit v1.2.2 From 6675ce13ed783f88ea5d82f0d855462b76ff0dad Mon Sep 17 00:00:00 2001 From: Marin Mitov Date: Mon, 22 Sep 2008 13:57:46 -0700 Subject: Documentation/DMA-mapping.txt: update for pci_dma_mapping_error() changes Make the example code consistent with changed API. Signed-off-by: Marin Mitov Acked-by: FUJITA Tomonori Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/DMA-mapping.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index b463ecd0c7ce..c74fec8c2351 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -740,7 +740,7 @@ failure can be determined by: dma_addr_t dma_handle; dma_handle = pci_map_single(pdev, addr, size, direction); - if (pci_dma_mapping_error(dma_handle)) { + if (pci_dma_mapping_error(pdev, dma_handle)) { /* * reduce current DMA mapping usage, * delay and try again later or -- cgit v1.2.2 From 2d4c8266774188cda7f7e612e6dfb8ad12c579d5 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Mon, 22 Sep 2008 13:57:49 -0700 Subject: sys_paccept: disable paccept() until API design is resolved The reasons for disabling paccept() are as follows: * The API is more complex than needed. There is AFAICS no demonstrated use case that the sigset argument of this syscall serves that couldn't equally be served by the use of pselect/ppoll/epoll_pwait + traditional accept(). Roland seems to concur with this opinion (http://thread.gmane.org/gmane.linux.kernel/723953/focus=732255). I have (more than once) asked Ulrich to explain otherwise (http://thread.gmane.org/gmane.linux.kernel/723952/focus=731018), but he does not respond, so one is left to assume that he doesn't know of such a case. * The use of a sigset argument is not consistent with other I/O APIs that can block on a single file descriptor (e.g., read(), recv(), connect()). * The behavior of paccept() when interrupted by a signal is IMO strange: the kernel restarts the system call if SA_RESTART was set for the handler. I think that it should not do this -- that it should behave consistently with paccept()/ppoll()/epoll_pwait(), which never restart, regardless of SA_RESTART. The reasoning here is that the very purpose of paccept() is to wait for a connection or a signal, and that restarting in the latter case is probably never useful. (Note: Roland disagrees on this point, believing that rather paccept() should be consistent with accept() in its behavior wrt EINTR (http://thread.gmane.org/gmane.linux.kernel/723953/focus=732255).) I believe that instead, a simpler API, consistent with Ulrich's other recent additions, is preferable: accept4(int fd, struct sockaddr *sa, socklen_t *salen, ind flags); (This simpler API was originally proposed by Ulrich: http://thread.gmane.org/gmane.linux.network/92072) If this simpler API is added, then if we later decide that the sigset argument really is required, then a suitable bit in 'flags' could be added to indicate the presence of the sigset argument. At this point, I am hoping we either will get a counter-argument from Ulrich about why we really do need paccept()'s sigset argument, or that he will resubmit the original accept4() patch. Signed-off-by: Michael Kerrisk Cc: David Miller Cc: Davide Libenzi Cc: Alan Cox Cc: Ulrich Drepper Cc: Jakub Jelinek Cc: Roland McGrath Cc: Oleg Nesterov Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- net/socket.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/socket.c b/net/socket.c index 8ef8ba81b9e2..3e8d4e35c08f 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1511,6 +1511,7 @@ out_fd: goto out_put; } +#if 0 #ifdef HAVE_SET_RESTORE_SIGMASK asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr, int __user *upeer_addrlen, @@ -1564,6 +1565,7 @@ asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr, return do_accept(fd, upeer_sockaddr, upeer_addrlen, flags); } #endif +#endif asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr, int __user *upeer_addrlen) -- cgit v1.2.2 From db203d53d474aa068984e409d807628f5841da1b Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Mon, 22 Sep 2008 13:57:50 -0700 Subject: mm: tiny-shmem fix lock ordering: mmap_sem vs i_mutex tiny-shmem calls do_truncate in shmem_file_setup. do_truncate takes i_mutex, and shmem_file_setup is called with mmap_sem held. However i_mutex nests outside mmap_sem. Copy the code in shmem.c to avoid this problem. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Nick Piggin Reported-and-tested-by: Ingo Molnar Cc: Peter Zijlstra Cc: Matt Mackall Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/tiny-shmem.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-) diff --git a/mm/tiny-shmem.c b/mm/tiny-shmem.c index ae532f501943..d17cb6f6ab10 100644 --- a/mm/tiny-shmem.c +++ b/mm/tiny-shmem.c @@ -65,31 +65,25 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags) if (!dentry) goto put_memory; - error = -ENOSPC; - inode = ramfs_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0); - if (!inode) - goto put_dentry; - - d_instantiate(dentry, inode); error = -ENFILE; - file = alloc_file(shm_mnt, dentry, FMODE_WRITE | FMODE_READ, - &ramfs_file_operations); + file = get_empty_filp(); if (!file) goto put_dentry; - inode->i_nlink = 0; /* It is unlinked */ - - /* notify everyone as to the change of file size */ - error = do_truncate(dentry, size, 0, file); - if (error < 0) + error = -ENOSPC; + inode = ramfs_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0); + if (!inode) goto close_file; + d_instantiate(dentry, inode); + inode->i_size = size; + inode->i_nlink = 0; /* It is unlinked */ + init_file(file, shm_mnt, dentry, FMODE_WRITE | FMODE_READ, + &ramfs_file_operations); return file; close_file: put_filp(file); - return ERR_PTR(error); - put_dentry: dput(dentry); put_memory: -- cgit v1.2.2 From b4d19cc84e8e6838f4aa0b26b3afcdc8c7f71505 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 22 Sep 2008 13:57:51 -0700 Subject: Documentation/sysctl/kernel.txt: fix softlockup_thresh description - s/s/seconds/ - s/10 seconds/60 seconds/ - Mention the zero-disables-it feature. Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/sysctl/kernel.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 276a7e637822..e1ff0d920a5c 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -351,9 +351,10 @@ kernel. This value defaults to SHMMAX. softlockup_thresh: -This value can be used to lower the softlockup tolerance -threshold. The default threshold is 10s. If a cpu is locked up -for 10s, the kernel complains. Valid values are 1-60s. +This value can be used to lower the softlockup tolerance threshold. The +default threshold is 60 seconds. If a cpu is locked up for 60 seconds, +the kernel complains. Valid values are 1-60 seconds. Setting this +tunable to zero will disable the softlockup detection altogether. ============================================================== -- cgit v1.2.2 From a10cebf56ca7e7c034d1b6646230c6553e478967 Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Mon, 22 Sep 2008 13:57:52 -0700 Subject: memcg: check under limit at shrink_usage Current memory cgroup(both in mainline and -mm) doesn't account swap caches as memory(swap cache support is dropped temporarily now). So try_to_free_mem_cgroup_pages doesn't reflect the count of pages that have been moved to swap cache. But this makes mem_cgroup_shrink_usage fail easily if most of the pages are anon/shmem, and then shmem_getpage returns -ENOMEM and the process will be killed. This patch adds res_counter_check_under_limit to avoid these cases. BTW, even if swap cache support is enabled again, if a process is moved to another cgroup, which has been just made, between precharge and shrink_usage in shmem_getpage, shrink_usage may fail just because there is no pages to reclaim. So this change would make sense anyway. Signed-off-by: Daisuke Nishimura Cc: Balbir Singh Cc: Pavel Emelyanov Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 0f1f7a7374ba..c0500e4d3a2f 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -806,6 +806,7 @@ int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask) do { progress = try_to_free_mem_cgroup_pages(mem, gfp_mask); + progress += res_counter_check_under_limit(&mem->res); } while (!progress && --retry); css_put(&mem->css); -- cgit v1.2.2 From f05596dbc922276ed675c713519220bae8042e32 Mon Sep 17 00:00:00 2001 From: Anti Sullin Date: Mon, 22 Sep 2008 13:57:54 -0700 Subject: atmel_serial: update the powersave handler to match serial core This problem seems to be unnoticed so far: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b3b708fa2780cd2b5d8266a8f0c3a1cab364d4d2 has changed the serial core behavior to not to suspend the port if the device is enabled as a wakeup source. If the AT91 system goes to slow clock mode, the port should be suspended always and the clocks should be switched off. The patch attached updates the atmel_serial driver to match the changes in serial core. Also, the interrupts are disabled when the clock is disabled. If we disable the clock with interrupts enabled, an interrupt may get stuck. If this is the DBGU interrupt, this blocks the OR logic at system controller and thus all other sysc interrupts. Signed-off-by: Anti Sullin Signed-off-by: Haavard Skinnemoen Cc: Michael Trimarchi Cc: Andrew Victor Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/atmel_serial.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 3a6da80b081c..61fb8b6d19af 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -131,7 +131,8 @@ struct atmel_uart_char { struct atmel_uart_port { struct uart_port uart; /* uart */ struct clk *clk; /* uart clock */ - unsigned short suspended; /* is port suspended? */ + int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */ + u32 backup_imr; /* IMR saved during suspend */ int break_active; /* break being received */ short use_dma_rx; /* enable PDC receiver */ @@ -984,8 +985,15 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, * This is called on uart_open() or a resume event. */ clk_enable(atmel_port->clk); + + /* re-enable interrupts if we disabled some on suspend */ + UART_PUT_IER(port, atmel_port->backup_imr); break; case 3: + /* Back up the interrupt mask and disable all interrupts */ + atmel_port->backup_imr = UART_GET_IMR(port); + UART_PUT_IDR(port, -1); + /* * Disable the peripheral clock for this serial port. * This is called on uart_close() or a suspend event. @@ -1475,13 +1483,12 @@ static int atmel_serial_suspend(struct platform_device *pdev, cpu_relax(); } - if (device_may_wakeup(&pdev->dev) - && !atmel_serial_clk_will_stop()) - enable_irq_wake(port->irq); - else { - uart_suspend_port(&atmel_uart, port); - atmel_port->suspended = 1; - } + /* we can not wake up if we're running on slow clock */ + atmel_port->may_wakeup = device_may_wakeup(&pdev->dev); + if (atmel_serial_clk_will_stop()) + device_set_wakeup_enable(&pdev->dev, 0); + + uart_suspend_port(&atmel_uart, port); return 0; } @@ -1491,11 +1498,8 @@ static int atmel_serial_resume(struct platform_device *pdev) struct uart_port *port = platform_get_drvdata(pdev); struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - if (atmel_port->suspended) { - uart_resume_port(&atmel_uart, port); - atmel_port->suspended = 0; - } else - disable_irq_wake(port->irq); + uart_resume_port(&atmel_uart, port); + device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup); return 0; } @@ -1513,6 +1517,8 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE)); port = &atmel_ports[pdev->id]; + port->backup_imr = 0; + atmel_init_port(port, pdev); if (!atmel_use_dma_rx(&port->uart)) { -- cgit v1.2.2 From 44ea91c597ae4641d9ac21b8bbba0795d2f4261e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 20 Sep 2008 00:31:50 +0000 Subject: [SCSI] Fix hang with split requests Sometimes, particularly for USB devices with the last sector bug, requests get completed in chunks. There's a bug in this in that if one of the chunks gets an error, we complete that chunk with an error but never move on to the remaining ones, leading to the request hanging (because it's not fully completed). Fix this by completing all remaining chunks if an error is encountered. Cc: Alan Stern Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ff5d56b3ee4d..62307bd794a9 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -852,7 +852,7 @@ static void scsi_end_bidi_request(struct scsi_cmnd *cmd) void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) { int result = cmd->result; - int this_count = scsi_bufflen(cmd); + int this_count; struct request_queue *q = cmd->device->request_queue; struct request *req = cmd->request; int error = 0; @@ -908,6 +908,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) */ if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL) return; + this_count = blk_rq_bytes(req); /* good_bytes = 0, or (inclusive) there were leftovers and * result = 0, so scsi_end_request couldn't retry. -- cgit v1.2.2 From c9bab96bbfdda59fa8a35ba536c22e66055669e5 Mon Sep 17 00:00:00 2001 From: Kevin Lloyd Date: Tue, 26 Aug 2008 18:30:45 -0700 Subject: USB Storage: Sierra: Non-configurable TRU-Install This patch alters the Sierra Mass Storage patch so that it is non-configurable. Signed-off-by: Kevin Lloyd Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 12 ------------ drivers/usb/storage/Makefile | 3 +-- drivers/usb/storage/unusual_devs.h | 2 -- drivers/usb/storage/usb.c | 2 -- 4 files changed, 1 insertion(+), 18 deletions(-) diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index c76034672c18..3d9249632ae1 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -146,18 +146,6 @@ config USB_STORAGE_KARMA on the resulting scsi device node returns the Karma to normal operation. -config USB_STORAGE_SIERRA - bool "Sierra Wireless TRU-Install Feature Support" - depends on USB_STORAGE - help - Say Y here to include additional code to support Sierra Wireless - products with the TRU-Install feature (e.g., AC597E, AC881U). - - This code switches the Sierra Wireless device from being in - Mass Storage mode to Modem mode. It also has the ability to - support host software upgrades should full Linux support be added - to TRU-Install. - config USB_STORAGE_CYPRESS_ATACB bool "SAT emulation on Cypress USB/ATA Bridge with ATACB" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index bc3415b475c9..7f8beb5366ae 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -21,11 +21,10 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o -usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA) += sierra_ms.o usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ - initializers.o $(usb-storage-obj-y) + initializers.o sierra_ms.o $(usb-storage-obj-y) ifneq ($(CONFIG_USB_LIBUSUAL),) obj-$(CONFIG_USB) += libusual.o diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ba412e68d474..0d44f7c11b72 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1576,7 +1576,6 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, 0), -#ifdef CONFIG_USB_STORAGE_SIERRA /* Reported by Kevin Lloyd * Entry is needed for the initializer function override, * which instructs the device to load as a modem @@ -1587,7 +1586,6 @@ UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999, "USB MMC Storage", US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init, 0), -#endif /* Reported by Jaco Kroon * The usb-storage module found on the Digitech GNX4 (and supposedly other diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 73679aa506de..27016fd2cad1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -102,9 +102,7 @@ #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB #include "cypress_atacb.h" #endif -#ifdef CONFIG_USB_STORAGE_SIERRA #include "sierra_ms.h" -#endif /* Some informational data */ MODULE_AUTHOR("Matthew Dharm "); -- cgit v1.2.2 From 73b2c2057579314c4fea1a37e35a501fbb8b9916 Mon Sep 17 00:00:00 2001 From: Kevin Lloyd Date: Mon, 25 Aug 2008 19:20:40 -0700 Subject: USB Serial: Sierra: Device addition & version rev This patch adds devices to the sierra driver and rev's the driver version. Signed-off-by: Kevin Lloyd Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 706033753adb..396f099ba9f8 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -14,7 +14,7 @@ Whom based his on the Keyspan driver by Hugh Blemings */ -#define DRIVER_VERSION "v.1.2.13a" +#define DRIVER_VERSION "v.1.3.2" #define DRIVER_AUTHOR "Kevin Lloyd " #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" @@ -30,9 +30,6 @@ #define SWIMS_USB_REQUEST_SetPower 0x00 #define SWIMS_USB_REQUEST_SetNmea 0x07 -#define SWIMS_USB_REQUEST_SetMode 0x0B -#define SWIMS_USB_REQUEST_GetSwocInfo 0x0A -#define SWIMS_SET_MODE_Modem 0x0001 /* per port private data */ #define N_IN_URB 4 @@ -175,6 +172,8 @@ static struct usb_device_id id_table [] = { /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) }, { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */ + { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */ + { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */ @@ -204,6 +203,8 @@ static struct usb_device_id id_table [] = { /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)}, /* Sierra Wireless Device */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)}, + /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)}, { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ -- cgit v1.2.2 From 0bcfeb3ec9467a8dfae3e906925ec28fe788afcf Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 26 Aug 2008 14:43:46 -0700 Subject: USB: ehci: fix some ehci hangs and crashes I noticed that the "Refactor "if (handshake()) state = HC_STATE_HALT" patch from earlier this year perpetuated a potential problem: it can mark the controller as halted when it's still running (but not acting as, perhaps wrongly, expected). That caused some hangs and crashes, rather than more polite failure modes of a truly halted controller. This patch forces a true halt, and emits a (previously missing) diagnostic. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d9d53f289caf..8409e0705d63 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -145,16 +145,6 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr, return -ETIMEDOUT; } -static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, - u32 mask, u32 done, int usec) -{ - int error = handshake(ehci, ptr, mask, done, usec); - if (error) - ehci_to_hcd(ehci)->state = HC_STATE_HALT; - - return error; -} - /* force HC to halt state from unknown (EHCI spec section 2.3) */ static int ehci_halt (struct ehci_hcd *ehci) { @@ -173,6 +163,22 @@ static int ehci_halt (struct ehci_hcd *ehci) STS_HALT, STS_HALT, 16 * 125); } +static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, + u32 mask, u32 done, int usec) +{ + int error; + + error = handshake(ehci, ptr, mask, done, usec); + if (error) { + ehci_halt(ehci); + ehci_to_hcd(ehci)->state = HC_STATE_HALT; + ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n", + ptr, mask, done, error); + } + + return error; +} + /* put TDI/ARC silicon into EHCI mode */ static void tdi_reset (struct ehci_hcd *ehci) { -- cgit v1.2.2 From 0a4d7f45ac173862796eb81942afc843d6244798 Mon Sep 17 00:00:00 2001 From: Richard Nauber Date: Tue, 26 Aug 2008 23:34:11 +0200 Subject: USB: Fix the Nokia 6300 storage-mode. This patch fixes that behavior: ... Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] ASC=0x0 ASCQ=0x0 Aug 26 22:39:23 rnauber sd 2:0:0:0: [sda] Sense Key : 0x0 [current] ... cat /proc/bus/usb/devices ... T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=04fa Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 6300 S: SerialNumber=35XXXXXXXX C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ... From: Richard Nauber Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 0d44f7c11b72..37f45c6c8f7c 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -232,6 +232,13 @@ UNUSUAL_DEV( 0x0421, 0x04b9, 0x0551, 0x0551, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Richard Nauber */ +UNUSUAL_DEV( 0x0421, 0x04fa, 0x0601, 0x0601, + "Nokia", + "6300", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", -- cgit v1.2.2 From f8834f1febb8f56cdcfeb35485e0cc7a8d547818 Mon Sep 17 00:00:00 2001 From: Tony Murray Date: Fri, 22 Aug 2008 17:30:44 -0500 Subject: USB: Correct Sierra Wireless USB EVDO Modem Device ID I was trying to figure out why my device wasn't supported by the drivers/usb/serial/sierra.c driver, while looking throught the device IDs I spotted what I believe to be a typo in the device IDs. Please apply the following patch If you look down further, there is another HP wireless broadband card, which has a vendor ID of 03f0, like my device. Below is my "lsusb -v -d 03f0:1b1d". Bus 001 Device 005: ID 03f0:1b1d Hewlett-Packard Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x03f0 Hewlett-Packard idProduct 0x1b1d bcdDevice 0.01 iManufacturer 1 HP iProduct 2 HP ev2200 1xEV-DO Broadband Wireless Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 67 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 7 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 3 Data Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 128 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) From: Tony Murray Cc: Kevin Lloyd Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 396f099ba9f8..eb87640f362a 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -160,7 +160,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ - { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */ + { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ -- cgit v1.2.2 From 83a798207361cc26385187b2e71efa2b5d75de7f Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 22 Aug 2008 14:13:00 -0700 Subject: USB: fix hcd interrupt disabling Commit de85422b94ddb23c021126815ea49414047c13dc, 'USB: fix interrupt disabling for HCDs with shared interrupt handlers' changed usb_add_hcd() to strip IRQF_DISABLED from irqflags prior to calling request_irq() with the justification that such a removal was necessary for shared interrupts to work properly. Unfortunately, the change in that commit unconditionally removes the IRQF_DISABLED flag, causing problems on platforms that don't use a shared interrupt but require IRQF_DISABLED. This change adds a check for IRQF_SHARED prior to removing the IRQF_DISABLED flag. Fixes the PS3 system startup hang reported with recent Fedora and OpenSUSE kernels. Note that this problem is hidden when CONFIG_LOCKDEP=y (ps3_defconfig), as local_irq_enable_in_hardirq() is defined as a null statement for that config. CC: stable Signed-off-by: Geoff Levand Cc: Alan Stern Cc: Stefan Becker Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 8abd4e59bf4a..8ab389dca2b9 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1876,7 +1876,8 @@ int usb_add_hcd(struct usb_hcd *hcd, * with IRQF_SHARED. As usb_hcd_irq() will always disable * interrupts we can remove it here. */ - irqflags &= ~IRQF_DISABLED; + if (irqflags & IRQF_SHARED) + irqflags &= ~IRQF_DISABLED; snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); -- cgit v1.2.2 From 697e04db5678fadf96d437806b676403ebee806d Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 2 Sep 2008 10:52:08 +0200 Subject: USB: update of Documentation/usb/anchors.txt The extended anchor API is documented Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/anchors.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/usb/anchors.txt b/Documentation/usb/anchors.txt index 7304bcf5a306..5e6b64c20d25 100644 --- a/Documentation/usb/anchors.txt +++ b/Documentation/usb/anchors.txt @@ -42,9 +42,21 @@ This function kills all URBs associated with an anchor. The URBs are called in the reverse temporal order they were submitted. This way no data can be reordered. +usb_unlink_anchored_urbs() +-------------------------- + +This function unlinks all URBs associated with an anchor. The URBs +are processed in the reverse temporal order they were submitted. +This is similar to usb_kill_anchored_urbs(), but it will not sleep. +Therefore no guarantee is made that the URBs have been unlinked when +the call returns. They may be unlinked later but will be unlinked in +finite time. + usb_wait_anchor_empty_timeout() ------------------------------- This function waits for all URBs associated with an anchor to finish or a timeout, whichever comes first. Its return value will tell you whether the timeout was reached. + + -- cgit v1.2.2 From c3e3208e4b0cf4ed69cbcaa5e059e5cf64437c9a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 31 Aug 2008 18:04:27 -0700 Subject: usb gadget: fix omap_udc DMA regression This resolves another regression caused by the "use omap_read/write instead of __REG" patch: the hardware address used for DMA to/from the UDC became wrong. Bug noted by Russell King. Reported-by: Russell King Signed-off-by: David Brownell Acked-by: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/omap_udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 574c53831a05..bb54cca4c543 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -787,7 +787,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - (unsigned long) io_v2p(UDC_DATA_DMA), + UDC_DATA_DMA, 0, 0); } } else { @@ -804,7 +804,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - (unsigned long) io_v2p(UDC_DATA_DMA), + UDC_DATA_DMA, 0, 0); /* EMIFF or SDRC */ omap_set_dma_dest_burst_mode(ep->lch, -- cgit v1.2.2 From 49cd2480baeb377f91e66ba682f81cac2a1feaa1 Mon Sep 17 00:00:00 2001 From: Filip Joelsson Date: Sun, 31 Aug 2008 08:22:16 +0200 Subject: USB: Fixing Nokia 3310c in storage mode I had trouble connecting my cell phone as a storage device - so I added it to the unusual_devs.h list. I had trouble with the bcdDeviceMin and Max values - so after some experimenting I made it pretty inclusive. From: Filip Joelsson Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 37f45c6c8f7c..b311300cf788 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -160,6 +160,13 @@ UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), +/* Reported by Filip Joelsson */ +UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600, + "Nokia", + "Nokia 3110c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Mario Rettig */ UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, "Nokia", -- cgit v1.2.2 From 0590d5875e3a5dc6586fb16354037f115628896d Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Sat, 30 Aug 2008 19:42:02 +0300 Subject: usb: musb: fix include path headers were moved, fixing. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 4 ++-- drivers/usb/musb/omap2430.c | 4 ++-- drivers/usb/musb/omap2430.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index c5b8f0296fcf..128e949db47c 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -100,8 +100,8 @@ #include #ifdef CONFIG_ARM -#include -#include +#include +#include #include #endif diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 298b22e6ad0d..9d2dcb121c5e 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -35,8 +35,8 @@ #include #include -#include -#include +#include +#include #include "musb_core.h" #include "omap2430.h" diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index 786a62071f72..dc7670718cd2 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -11,8 +11,8 @@ #define __MUSB_OMAP243X_H__ #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) -#include -#include +#include +#include /* * OMAP2430-specific definitions -- cgit v1.2.2 From 01c17142659c02d8cd4c67acdd8358180c5c4fb6 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 26 Aug 2008 23:35:04 -0700 Subject: USB: fix EHCI periodic transfers As noted by Stefan Neis , we had a recent regression with EHCI periodic transfers, in some (seemingly not all that common) cases. The root cause was that the schedule activation was only loosely coupled to the addition or removal of transfers, so two different execution contexts could both think they had to deactivate (or conversely activate) the schedule. So this fix tightens that coupling, managing it more like a refcount. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 32 ++++++++++++++------------------ 1 file changed, 14 insertions(+), 18 deletions(-) diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index b7853c8bac0f..4a0c5a78b2ed 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -437,6 +437,9 @@ static int enable_periodic (struct ehci_hcd *ehci) u32 cmd; int status; + if (ehci->periodic_sched++) + return 0; + /* did clearing PSE did take effect yet? * takes effect only at frame boundaries... */ @@ -461,6 +464,9 @@ static int disable_periodic (struct ehci_hcd *ehci) u32 cmd; int status; + if (--ehci->periodic_sched) + return 0; + /* did setting PSE not take effect yet? * takes effect only at frame boundaries... */ @@ -544,13 +550,10 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) : (qh->usecs * 8); /* maybe enable periodic schedule processing */ - if (!ehci->periodic_sched++) - return enable_periodic (ehci); - - return 0; + return enable_periodic(ehci); } -static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) +static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) { unsigned i; unsigned period; @@ -586,9 +589,7 @@ static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) qh_put (qh); /* maybe turn off periodic schedule */ - ehci->periodic_sched--; - if (!ehci->periodic_sched) - (void) disable_periodic (ehci); + return disable_periodic(ehci); } static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) @@ -1562,9 +1563,7 @@ itd_link_urb ( urb->hcpriv = NULL; timer_action (ehci, TIMER_IO_WATCHDOG); - if (unlikely (!ehci->periodic_sched++)) - return enable_periodic (ehci); - return 0; + return enable_periodic(ehci); } #define ISO_ERRS (EHCI_ISOC_BUF_ERR | EHCI_ISOC_BABBLE | EHCI_ISOC_XACTERR) @@ -1642,7 +1641,7 @@ itd_complete ( ehci_urb_done(ehci, urb, 0); retval = true; urb = NULL; - ehci->periodic_sched--; + (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (unlikely (list_empty (&stream->td_list))) { @@ -1951,9 +1950,7 @@ sitd_link_urb ( urb->hcpriv = NULL; timer_action (ehci, TIMER_IO_WATCHDOG); - if (!ehci->periodic_sched++) - return enable_periodic (ehci); - return 0; + return enable_periodic(ehci); } /*-------------------------------------------------------------------------*/ @@ -2019,7 +2016,7 @@ sitd_complete ( ehci_urb_done(ehci, urb, 0); retval = true; urb = NULL; - ehci->periodic_sched--; + (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (list_empty (&stream->td_list)) { @@ -2243,8 +2240,7 @@ restart: if (unlikely (modified)) { if (likely(ehci->periodic_sched > 0)) goto restart; - /* maybe we can short-circuit this scan! */ - disable_periodic(ehci); + /* short-circuit this scan */ now_uframe = clock; break; } -- cgit v1.2.2 From ce816cf9c917435cd2e3b68acc7cfe2c1f4a814f Mon Sep 17 00:00:00 2001 From: Andreas Bombe Date: Sun, 14 Sep 2008 01:58:55 +0200 Subject: usb-serial: Add Siemens EF81 to PL-2303 hack triggers This hardware needs the pl2303 hack in order to work properly :( Signed-off-by: Andreas Bombe Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index b157c48e8b78..4f7f9e3ae0a4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -733,7 +733,9 @@ int usb_serial_probe(struct usb_interface *interface, ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) && (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) || ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID))) { + (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) || + ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) { if (interface != dev->actconfig->interface[0]) { /* check out the endpoints of the other interface*/ iface_desc = dev->actconfig->interface[0]->cur_altsetting; -- cgit v1.2.2 From ba0f332c413796925ce322d311d75269689a9e5d Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Thu, 4 Sep 2008 21:28:21 +0100 Subject: USB: SERIAL CP2101 add device IDs Signed-off-by: Craig Shelley Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 442cba69cce5..1279553381e3 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -72,6 +72,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ + { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ @@ -83,6 +84,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ + { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ @@ -93,6 +95,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ + { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { } /* Terminating Entry */ }; -- cgit v1.2.2 From fe1926a0f549741ed0ca778aa1c7d3e208895dee Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 4 Sep 2008 09:56:35 -0400 Subject: USB: unusual_devs addition for RockChip MP3 player This patch (as1136) adds an unusual_devs entry for a version of the RockChip MP3 player which can't handle the MODE SENSE command used for write-protect detection. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b311300cf788..4d9ca02ac677 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1001,6 +1001,13 @@ UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Adrian Pilchowiec */ +UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, + "RockChip", + "MP3", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), + /* Reported by Massimiliano Ghilardi * This USB MP3/AVI player device fails and disconnects if more than 128 * sectors (64kB) are read/written in a single command, and may be present -- cgit v1.2.2 From 6ef65a7fb609a7aca72730dfb9890f30fcd723bf Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 8 Sep 2008 10:08:59 +0200 Subject: USB: fsl_usb2_udc: fix VDBG() format string Fixes: drivers/usb/gadget/fsl_usb2_udc.c: In function 'dr_controller_setup': drivers/usb/gadget/fsl_usb2_udc.c:229: warning: format '%p' expects type 'void *', but argument 3 has type 'int' Signed-off-by: Peter Korsgaard Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_usb2_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 1cfccf102a2d..45ad556169f1 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -223,7 +223,7 @@ static int dr_controller_setup(struct fsl_udc *udc) fsl_writel(tmp, &dr_regs->endpointlistaddr); VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x", - (int)udc->ep_qh, (int)tmp, + udc->ep_qh, (int)tmp, fsl_readl(&dr_regs->endpointlistaddr)); /* Config PHY interface */ -- cgit v1.2.2 From 2bcbe4c199ec012169f938d2c6b543f50c4925ed Mon Sep 17 00:00:00 2001 From: Chris Adams Date: Wed, 10 Sep 2008 14:11:38 -0700 Subject: usb serial: ti_usb_3410_5052 obviously broken by firmware changes While making some other changes to ti_usb_3410_5052, I noticed that the changes made to move the firmware loading to a separate function are broken (in ti_download_firmware(), status is set to -ENOMEM and never changed). This means the driver will never initialize the device properly. It looks like status was supposed to get the result of ti_do_download(). Signed-off-by: Chris Adams Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index e39c779e4160..9a3e495c769c 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1744,7 +1744,7 @@ static int ti_download_firmware(struct ti_device *tdev, int type) if (buffer) { memcpy(buffer, fw_p->data, fw_p->size); memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size); - ti_do_download(dev, pipe, buffer, fw_p->size); + status = ti_do_download(dev, pipe, buffer, fw_p->size); kfree(buffer); } release_firmware(fw_p); -- cgit v1.2.2 From a18f80b4e2fdbc7b88d412c3deb533b9f1f30c30 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 16 Sep 2008 15:46:50 +0200 Subject: USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4) USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4) Signed-off-by: Jaroslav Kysela Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 984f6eff4c47..8ff8d0a1bae3 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -654,6 +654,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 382265bba969..ad41287ac2c7 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -750,6 +750,7 @@ #define PAPOUCH_VID 0x5050 /* Vendor ID */ #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ /* * ACG Identification Technologies GmbH products (http://www.acg.de/). -- cgit v1.2.2 From 884579d03a3e1e9ac8b7f32a1c36387cac3eb80b Mon Sep 17 00:00:00 2001 From: Otavio Salvador Date: Wed, 17 Sep 2008 14:40:46 -0300 Subject: USB: serial: add ZTE CDMA Tech id to option driver Signed-off-by: Otavio Salvador Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9f9cd36455f4..73f8277f88f2 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -218,6 +218,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 #define ZTE_PRODUCT_MF628 0x0015 +#define ZTE_PRODUCT_CDMA_TECH 0xfffe static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, @@ -347,6 +348,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.2 From b77a5c7040643e658622148bb7d7dad63e8d0158 Mon Sep 17 00:00:00 2001 From: Kevin Lloyd Date: Wed, 17 Sep 2008 09:03:38 -0700 Subject: USB Serial: Sierra: Add MC8785 VID/PID Add another MC8785 VID/PID Signed-off-by: Kevin Lloyd Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index eb87640f362a..ea1a103c99be 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -186,6 +186,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */ { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */ { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */ + { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ { USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */ { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */ -- cgit v1.2.2 From 09fa14aa9273ca5cf5459b2057eb79e83e81e6be Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 22 Sep 2008 15:00:08 -0700 Subject: USB: drivers/usb/musb/: disable it on SuperH In file included from drivers/usb/musb/musb_core.h:59, from drivers/usb/musb/musb_core.c:108: drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl' /usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl' /usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here drivers/usb/musb/musb_io.h:44: error: conflicting types for 'readsw' /usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'readsw' was here drivers/usb/musb/musb_io.h:46: error: conflicting types for 'readsb' /usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'readsb' was here drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl' /usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl' /usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here drivers/usb/musb/musb_io.h:51: error: conflicting types for 'writesw' /usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'writesw' was here drivers/usb/musb/musb_io.h:53: error: conflicting types for 'writesb' /usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'writesb' was here Cc: Karsten Keil Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index a0017486ad4e..58b2b8fc9439 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -9,6 +9,7 @@ comment "Enable Host or Gadget support to see Inventra options" # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC depends on (USB || USB_GADGET) && HAVE_CLK + depends on !SUPERH select TWL4030_USB if MACH_OMAP_3430SDP tristate 'Inventra Highspeed Dual Role Controller (TI, ...)' help -- cgit v1.2.2 From 96285cb885b445b03b22849f2536af23c7454a11 Mon Sep 17 00:00:00 2001 From: Gaetan Carlier Date: Mon, 22 Sep 2008 15:00:09 -0700 Subject: usb: ftdi_sio: add support for Domintell devices Support for Domintell devices (FTDI FT232BM based) : DGQG and DUSB01 module. PIDs were missing. Signed-off-by: Gaetan Carlier Cc: Greg Kroah-Hartman Cc: Ian Abbott Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio.h | 4 ++++ 2 files changed, 6 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8ff8d0a1bae3..3dc93b542b30 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -655,6 +655,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index ad41287ac2c7..8a5b6df3a976 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -839,6 +839,10 @@ /* Rig Expert Ukraine devices */ #define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ -- cgit v1.2.2 From af747c460b663a4b7795dc3f6897b5506fde6888 Mon Sep 17 00:00:00 2001 From: David Almaroad Date: Mon, 22 Sep 2008 15:00:11 -0700 Subject: usb: unusual devs patch for Nokia 5310 Music Xpress The Nokia 5310 Music Xpress phone reports one too many sectors in usb-storage mode. This patch resolves that. Signed-off-by: David Almaroad Cc: Matthew Dharm Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 4d9ca02ac677..cd155475cb6e 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -246,6 +246,13 @@ UNUSUAL_DEV( 0x0421, 0x04fa, 0x0601, 0x0601, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Patch for Nokia 5310 capacity */ +UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, + "Nokia", + "5310", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", -- cgit v1.2.2 From 5257d97a219e17abf8188f136e1189da3b3af33c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 22 Sep 2008 14:43:08 -0400 Subject: USB: revert recovery from transient errors This patch (as1135) essentially reverts the major parts of two earlier patches to usbcore, because they ended up causing a regression. Trying to recover from transient communication errors can lead to other problems, because operations that failed during the error period are not always retried. The simplest example is the initial Set-Config request sent after device enumeration; if it gets lost then it will not be retried and the device will remain unconfigured. This patch restores the old behavior in which any port disconnect or port disable causes the entire device structure to be removed, fixing a reported regression. Signed-off-by: Alan Stern Tested-by: Frans Pop Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 39 +++++++++++++++++---------------------- 1 file changed, 17 insertions(+), 22 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6a5cb018383d..d99963873e37 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2683,35 +2683,17 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, USB_PORT_STAT_C_ENABLE); #endif - /* Try to use the debounce delay for protection against - * port-enable changes caused, for example, by EMI. - */ - if (portchange & (USB_PORT_STAT_C_CONNECTION | - USB_PORT_STAT_C_ENABLE)) { - status = hub_port_debounce(hub, port1); - if (status < 0) { - if (printk_ratelimit()) - dev_err (hub_dev, "connect-debounce failed, " - "port %d disabled\n", port1); - portstatus &= ~USB_PORT_STAT_CONNECTION; - } else { - portstatus = status; - } - } - /* Try to resuscitate an existing device */ udev = hdev->children[port1-1]; if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && udev->state != USB_STATE_NOTATTACHED) { - usb_lock_device(udev); if (portstatus & USB_PORT_STAT_ENABLE) { status = 0; /* Nothing to do */ - } else if (!udev->persist_enabled) { - status = -ENODEV; /* Mustn't resuscitate */ #ifdef CONFIG_USB_SUSPEND - } else if (udev->state == USB_STATE_SUSPENDED) { + } else if (udev->state == USB_STATE_SUSPENDED && + udev->persist_enabled) { /* For a suspended device, treat this as a * remote wakeup event. */ @@ -2726,7 +2708,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, #endif } else { - status = usb_reset_device(udev); + status = -ENODEV; /* Don't resuscitate */ } usb_unlock_device(udev); @@ -2741,6 +2723,19 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, usb_disconnect(&hdev->children[port1-1]); clear_bit(port1, hub->change_bits); + if (portchange & (USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE)) { + status = hub_port_debounce(hub, port1); + if (status < 0) { + if (printk_ratelimit()) + dev_err(hub_dev, "connect-debounce failed, " + "port %d disabled\n", port1); + portstatus &= ~USB_PORT_STAT_CONNECTION; + } else { + portstatus = status; + } + } + /* Return now if debouncing failed or nothing is connected */ if (!(portstatus & USB_PORT_STAT_CONNECTION)) { @@ -2748,7 +2743,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 && !(portstatus & (1 << USB_PORT_FEAT_POWER))) set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); - + if (portstatus & USB_PORT_STAT_ENABLE) goto done; return; -- cgit v1.2.2 From 44ce17192a01218b242e032237e1d2e52ef50429 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Tue, 23 Sep 2008 19:48:36 +0200 Subject: [MIPS] au1000: Fix gpio direction When setting the direction of one GPIO pin we have to keep the state of the other pins, hence use binary OR. Also gpio_direction_output() wants to set an initial value, so add that too. This fixes a problem with the USB power switch on mtx-1 boards. Signed-off-by: Bruno Randolf Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/gpio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index b485d94ce8a5..1f058434b726 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -61,7 +61,8 @@ static int au1xxx_gpio2_direction_input(unsigned gpio) static int au1xxx_gpio2_direction_output(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; - gpio2->dir = (0x01 << gpio) | (value << gpio); + gpio2->dir |= 0x01 << gpio; + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); return 0; } @@ -90,6 +91,7 @@ static int au1xxx_gpio1_direction_input(unsigned gpio) static int au1xxx_gpio1_direction_output(unsigned gpio, int value) { gpio1->trioutclr = (0x01 & gpio); + au1xxx_gpio1_write(gpio, value); return 0; } -- cgit v1.2.2 From 5291925a9a65ea334f6e887d0f01dd119b8e2b2e Mon Sep 17 00:00:00 2001 From: Jack Tan Date: Tue, 23 Sep 2008 22:52:34 +0800 Subject: [MIPS] Fixe the definition of PTRS_PER_PGD MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When we use > 4KB's page size the original definition is not consistent with PGDIR_SIZE. For exeample, if we use 16KB page size the PGDIR_SHIFT is (14-2) + 14 = 26, PGDIR_SIZE is 2^26，so the PTRS_PER_PGD should be: 2^32/2^26 = 2^6 but the original definition of PTRS_PER_PGD is 4096 (PGDIR_ORDER = 0). So, this definition needs to be consistent with the PGDIR_SIZE. And the new definition is consistent with the PGD init in pagetable_init(). Signed-off-by: Dajie Tan Signed-off-by: Ralf Baechle --- include/asm-mips/pgtable-32.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h index 4396e9ffd418..55813d6150c7 100644 --- a/include/asm-mips/pgtable-32.h +++ b/include/asm-mips/pgtable-32.h @@ -57,7 +57,7 @@ extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, #define PMD_ORDER 1 #define PTE_ORDER 0 -#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t)) +#define PTRS_PER_PGD (USER_PTRS_PER_PGD * 2) #define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t)) #define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE) -- cgit v1.2.2 From 1eda81495a49a4ee91d8863b0a441a624375efea Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Tue, 23 Sep 2008 22:40:02 -0400 Subject: x86: prevent stale state of c1e_mask across CPU offline/online, fix Fix build error introduced by commit 4faac97d44ac27 ("x86: prevent stale state of c1e_mask across CPU offline/online"). process_32.c needs to include idle.h to get the prototype for c1e_remove_cpu() Signed-off-by: Marc Dionne Signed-off-by: Ingo Molnar --- arch/x86/kernel/process_32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 4b3cfdf54216..31f40b24bf5d 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -55,6 +55,7 @@ #include #include #include +#include asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); -- cgit v1.2.2 From 77a9a768b7374cd23d1f400097eede9f1547f508 Mon Sep 17 00:00:00 2001 From: Jeremy Katz Date: Tue, 23 Sep 2008 21:54:00 -0400 Subject: x86: disable apm on the olpc The OLPC doesn't support APM but also doesn't have DMI, so we can't detect and disable it based on DMI data. So, just disable based on machine_is_olpc() Signed-off-by: Jeremy Katz Signed-off-by: Ingo Molnar --- arch/x86/kernel/apm_32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 9ee24e6bc4b0..732d1f4e10ee 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -234,6 +234,7 @@ #include #include #include +#include #include #include @@ -2217,7 +2218,7 @@ static int __init apm_init(void) dmi_check_system(apm_dmi_table); - if (apm_info.bios.version == 0 || paravirt_enabled()) { + if (apm_info.bios.version == 0 || paravirt_enabled() || machine_is_olpc()) { printk(KERN_INFO "apm: BIOS not found.\n"); return -ENODEV; } -- cgit v1.2.2 From 4ebb52d34fac2904e541ccfa8e32126db836fa92 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-Koenig Date: Wed, 24 Sep 2008 13:39:21 +0200 Subject: i2c-powermac: Fix section for probe and remove functions __devexit for i2c_powermac_probe is obviously wrong. In the definition of struct platform_driver i2c_powermac_driver the remove function i2c_powermac_remove is wrapped in __devexit_p, so it should be defined using __devexit. Signed-off-by: Uwe Kleine-Koenig Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-powermac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 22f6d5c00d80..0e7b1c6724aa 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -180,7 +180,7 @@ static const struct i2c_algorithm i2c_powermac_algorithm = { }; -static int i2c_powermac_remove(struct platform_device *dev) +static int __devexit i2c_powermac_remove(struct platform_device *dev) { struct i2c_adapter *adapter = platform_get_drvdata(dev); struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter); @@ -200,7 +200,7 @@ static int i2c_powermac_remove(struct platform_device *dev) } -static int __devexit i2c_powermac_probe(struct platform_device *dev) +static int __devinit i2c_powermac_probe(struct platform_device *dev) { struct pmac_i2c_bus *bus = dev->dev.platform_data; struct device_node *parent = NULL; -- cgit v1.2.2 From e74783ec3cb981211689bd2cfd3248f8dc48ec01 Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Wed, 24 Sep 2008 13:39:21 +0200 Subject: i2c-dev: Return correct error code on class_create() failure We need to convert the error pointer from class_create(), else we'll return the successful return code from register_chrdev() on failure. Signed-off-by: Sven Wegener Signed-off-by: Jean Delvare --- drivers/i2c/i2c-dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index af4491fa7e34..307d976c9b69 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -583,8 +583,10 @@ static int __init i2c_dev_init(void) goto out; i2c_dev_class = class_create(THIS_MODULE, "i2c-dev"); - if (IS_ERR(i2c_dev_class)) + if (IS_ERR(i2c_dev_class)) { + res = PTR_ERR(i2c_dev_class); goto out_unreg_chrdev; + } res = i2c_add_driver(&i2cdev_driver); if (res) -- cgit v1.2.2 From 17a172fe112a15dc9cd694d84983c51e1dc6bf34 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 24 Sep 2008 13:39:22 +0200 Subject: i2c: Fix mailing lists in two MAINTAINERS entries Two MAINTAINER entries (I2C/SMBUS STUB DRIVER and SIS 96X I2C/SMBUS DRIVER) were improperly pointing to the lm-sensors mailing list instead of the i2c mailing list. Fix them. Signed-off-by: Jean Delvare Cc: Mark M. Hoffman --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 42ebbfdc350b..3596d1782264 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1984,7 +1984,7 @@ S: Maintained I2C/SMBUS STUB DRIVER P: Mark M. Hoffman M: mhoffman@lightlink.com -L: lm-sensors@lm-sensors.org +L: i2c@lm-sensors.org S: Maintained I2C SUBSYSTEM @@ -3726,7 +3726,7 @@ S: Maintained SIS 96X I2C/SMBUS DRIVER P: Mark M. Hoffman M: mhoffman@lightlink.com -L: lm-sensors@lm-sensors.org +L: i2c@lm-sensors.org S: Maintained SIS FRAMEBUFFER DRIVER -- cgit v1.2.2 From 92cccc2cda9a744326bbd9f16c635187af7f8a09 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 23 Sep 2008 14:28:16 -0700 Subject: ath9k: disable MIB interrupts to fix interrupt storm Enabling the MIB interrupts has proven to cause an interrupt storm after 7 hours of run. We will make use of the MIB interrupt once we have ANI supported added so for now to cure this we disable the interrupt. The interrupt storm can be seen as follows after 7 hours of run as reported by Steven Noonan : 18:28:38 sum 1106.00 18:28:39 sum 1037.62 18:28:40 sum 1069.00 18:28:41 sum 1167.00 18:28:42 sum 1155.00 18:28:43 sum 1339.00 18:28:44 sum 18355.00 18:28:45 sum 17845.45 18:28:46 sum 15285.00 18:28:47 sum 17511.00 18:28:48 sum 17568.69 18:28:49 sum 17704.04 18:28:50 sum 18566.67 18:28:51 sum 18913.13 at 18:28:44 the MIB interrupt kicked off and caused huge latency which can be seen even on a video he submitted: http://www.youtube.com/watch?v=4GeCx1gZMpA Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c index c04959357bda..87e37bc39145 100644 --- a/drivers/net/wireless/ath9k/core.c +++ b/drivers/net/wireless/ath9k/core.c @@ -795,6 +795,12 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) sc->sc_imask |= ATH9K_INT_CST; + /* Note: We disable MIB interrupts for now as we don't yet + * handle processing ANI, otherwise you will get an interrupt + * storm after about 7 hours of usage making the system unusable + * with huge latency. Once we do have ANI processing included + * we can re-enable this interrupt. */ +#if 0 /* * Enable MIB interrupts when there are hardware phy counters. * Note we only do this (at the moment) for station mode. @@ -802,6 +808,7 @@ int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) if (ath9k_hw_phycounters(ah) && ((sc->sc_opmode == ATH9K_M_STA) || (sc->sc_opmode == ATH9K_M_IBSS))) sc->sc_imask |= ATH9K_INT_MIB; +#endif /* * Some hardware processes the TIM IE and fires an * interrupt when the TIM bit is set. For hardware -- cgit v1.2.2 From 72029fe85d8d060b3f966f2dbc36b3c75b5a6532 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Sep 2008 16:22:23 -0500 Subject: 9p: implement proper trans module refcounting and unregistration 9p trans modules aren't refcounted nor were they unregistered properly. Fix it. * Add 9p_trans_module->owner and reference the module on each trans instance creation and put it on destruction. * Protect v9fs_trans_list with a spinlock. This isn't strictly necessary as the list is manipulated only during module loading / unloading but it's a good idea to make the API safe. * Unregister trans modules when the corresponding module is being unloaded. * While at it, kill unnecessary EXPORT_SYMBOL on p9_trans_fd_init(). Signed-off-by: Tejun Heo Signed-off-by: Eric Van Hensbergen --- include/net/9p/9p.h | 1 + include/net/9p/transport.h | 9 ++++- net/9p/client.c | 10 ++++- net/9p/mod.c | 92 +++++++++++++++++++++++++++++++++------------- net/9p/trans_fd.c | 11 +++++- net/9p/trans_virtio.c | 2 + 6 files changed, 95 insertions(+), 30 deletions(-) diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h index b3d3e27c6299..c3626c0ba9d3 100644 --- a/include/net/9p/9p.h +++ b/include/net/9p/9p.h @@ -596,4 +596,5 @@ int p9_idpool_check(int id, struct p9_idpool *p); int p9_error_init(void); int p9_errstr2errno(char *, int); int p9_trans_fd_init(void); +void p9_trans_fd_exit(void); #endif /* NET_9P_H */ diff --git a/include/net/9p/transport.h b/include/net/9p/transport.h index 0db3a4038dc0..3ca737120a90 100644 --- a/include/net/9p/transport.h +++ b/include/net/9p/transport.h @@ -26,6 +26,8 @@ #ifndef NET_9P_TRANSPORT_H #define NET_9P_TRANSPORT_H +#include + /** * enum p9_trans_status - different states of underlying transports * @Connected: transport is connected and healthy @@ -91,9 +93,12 @@ struct p9_trans_module { int maxsize; /* max message size of transport */ int def; /* this transport should be default */ struct p9_trans * (*create)(const char *, char *, int, unsigned char); + struct module *owner; }; void v9fs_register_trans(struct p9_trans_module *m); -struct p9_trans_module *v9fs_match_trans(const substring_t *name); -struct p9_trans_module *v9fs_default_trans(void); +void v9fs_unregister_trans(struct p9_trans_module *m); +struct p9_trans_module *v9fs_get_trans_by_name(const substring_t *name); +struct p9_trans_module *v9fs_get_default_trans(void); +void v9fs_put_trans(struct p9_trans_module *m); #endif /* NET_9P_TRANSPORT_H */ diff --git a/net/9p/client.c b/net/9p/client.c index 2ffe40cf2f01..10e320307ec0 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -75,7 +75,6 @@ static int parse_opts(char *opts, struct p9_client *clnt) int option; int ret = 0; - clnt->trans_mod = v9fs_default_trans(); clnt->dotu = 1; clnt->msize = 8192; @@ -108,7 +107,7 @@ static int parse_opts(char *opts, struct p9_client *clnt) clnt->msize = option; break; case Opt_trans: - clnt->trans_mod = v9fs_match_trans(&args[0]); + clnt->trans_mod = v9fs_get_trans_by_name(&args[0]); break; case Opt_legacy: clnt->dotu = 0; @@ -117,6 +116,10 @@ static int parse_opts(char *opts, struct p9_client *clnt) continue; } } + + if (!clnt->trans_mod) + clnt->trans_mod = v9fs_get_default_trans(); + kfree(options); return ret; } @@ -150,6 +153,7 @@ struct p9_client *p9_client_create(const char *dev_name, char *options) if (!clnt) return ERR_PTR(-ENOMEM); + clnt->trans_mod = NULL; clnt->trans = NULL; spin_lock_init(&clnt->lock); INIT_LIST_HEAD(&clnt->fidlist); @@ -235,6 +239,8 @@ void p9_client_destroy(struct p9_client *clnt) clnt->trans = NULL; } + v9fs_put_trans(clnt->trans_mod); + list_for_each_entry_safe(fid, fidptr, &clnt->fidlist, flist) p9_fid_destroy(fid); diff --git a/net/9p/mod.c b/net/9p/mod.c index bdee1fb7cc62..1084feb24cb0 100644 --- a/net/9p/mod.c +++ b/net/9p/mod.c @@ -31,6 +31,7 @@ #include #include #include +#include #ifdef CONFIG_NET_9P_DEBUG unsigned int p9_debug_level = 0; /* feature-rific global debug level */ @@ -44,8 +45,8 @@ MODULE_PARM_DESC(debug, "9P debugging level"); * */ +static DEFINE_SPINLOCK(v9fs_trans_lock); static LIST_HEAD(v9fs_trans_list); -static struct p9_trans_module *v9fs_default_transport; /** * v9fs_register_trans - register a new transport with 9p @@ -54,48 +55,87 @@ static struct p9_trans_module *v9fs_default_transport; */ void v9fs_register_trans(struct p9_trans_module *m) { + spin_lock(&v9fs_trans_lock); list_add_tail(&m->list, &v9fs_trans_list); - if (m->def) - v9fs_default_transport = m; + spin_unlock(&v9fs_trans_lock); } EXPORT_SYMBOL(v9fs_register_trans); /** - * v9fs_match_trans - match transport versus registered transports + * v9fs_unregister_trans - unregister a 9p transport + * @m: the transport to remove + * + */ +void v9fs_unregister_trans(struct p9_trans_module *m) +{ + spin_lock(&v9fs_trans_lock); + list_del_init(&m->list); + spin_unlock(&v9fs_trans_lock); +} +EXPORT_SYMBOL(v9fs_unregister_trans); + +/** + * v9fs_get_trans_by_name - get transport with the matching name * @name: string identifying transport * */ -struct p9_trans_module *v9fs_match_trans(const substring_t *name) +struct p9_trans_module *v9fs_get_trans_by_name(const substring_t *name) { - struct list_head *p; - struct p9_trans_module *t = NULL; - - list_for_each(p, &v9fs_trans_list) { - t = list_entry(p, struct p9_trans_module, list); - if (strncmp(t->name, name->from, name->to-name->from) == 0) - return t; - } - return NULL; + struct p9_trans_module *t, *found = NULL; + + spin_lock(&v9fs_trans_lock); + + list_for_each_entry(t, &v9fs_trans_list, list) + if (strncmp(t->name, name->from, name->to-name->from) == 0 && + try_module_get(t->owner)) { + found = t; + break; + } + + spin_unlock(&v9fs_trans_lock); + return found; } -EXPORT_SYMBOL(v9fs_match_trans); +EXPORT_SYMBOL(v9fs_get_trans_by_name); /** - * v9fs_default_trans - returns pointer to default transport + * v9fs_get_default_trans - get the default transport * */ -struct p9_trans_module *v9fs_default_trans(void) +struct p9_trans_module *v9fs_get_default_trans(void) { - if (v9fs_default_transport) - return v9fs_default_transport; - else if (!list_empty(&v9fs_trans_list)) - return list_first_entry(&v9fs_trans_list, - struct p9_trans_module, list); - else - return NULL; + struct p9_trans_module *t, *found = NULL; + + spin_lock(&v9fs_trans_lock); + + list_for_each_entry(t, &v9fs_trans_list, list) + if (t->def && try_module_get(t->owner)) { + found = t; + break; + } + + if (!found) + list_for_each_entry(t, &v9fs_trans_list, list) + if (try_module_get(t->owner)) { + found = t; + break; + } + + spin_unlock(&v9fs_trans_lock); + return found; } -EXPORT_SYMBOL(v9fs_default_trans); +EXPORT_SYMBOL(v9fs_get_default_trans); +/** + * v9fs_put_trans - put trans + * @m: transport to put + * + */ +void v9fs_put_trans(struct p9_trans_module *m) +{ + if (m) + module_put(m->owner); +} /** * v9fs_init - Initialize module @@ -120,6 +160,8 @@ static int __init init_p9(void) static void __exit exit_p9(void) { printk(KERN_INFO "Unloading 9P2000 support\n"); + + p9_trans_fd_exit(); } module_init(init_p9) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index cdf137af7adc..6a32ffdb9429 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -1629,6 +1629,7 @@ static struct p9_trans_module p9_tcp_trans = { .maxsize = MAX_SOCK_BUF, .def = 1, .create = p9_trans_create_tcp, + .owner = THIS_MODULE, }; static struct p9_trans_module p9_unix_trans = { @@ -1636,6 +1637,7 @@ static struct p9_trans_module p9_unix_trans = { .maxsize = MAX_SOCK_BUF, .def = 0, .create = p9_trans_create_unix, + .owner = THIS_MODULE, }; static struct p9_trans_module p9_fd_trans = { @@ -1643,6 +1645,7 @@ static struct p9_trans_module p9_fd_trans = { .maxsize = MAX_SOCK_BUF, .def = 0, .create = p9_trans_create_fd, + .owner = THIS_MODULE, }; int p9_trans_fd_init(void) @@ -1659,4 +1662,10 @@ int p9_trans_fd_init(void) return 0; } -EXPORT_SYMBOL(p9_trans_fd_init); + +void p9_trans_fd_exit(void) +{ + v9fs_unregister_trans(&p9_tcp_trans); + v9fs_unregister_trans(&p9_unix_trans); + v9fs_unregister_trans(&p9_fd_trans); +} diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index 42adc052b149..94912e077a55 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -528,6 +528,7 @@ static struct p9_trans_module p9_virtio_trans = { .create = p9_virtio_create, .maxsize = PAGE_SIZE*16, .def = 0, + .owner = THIS_MODULE, }; /* The standard init function */ @@ -545,6 +546,7 @@ static int __init p9_virtio_init(void) static void __exit p9_virtio_cleanup(void) { unregister_virtio_driver(&p9_virtio_drv); + v9fs_unregister_trans(&p9_virtio_trans); } module_init(p9_virtio_init); -- cgit v1.2.2 From 7dc5d24be06a5ed874af035d52a083a7b61ef1bd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Sep 2008 16:22:23 -0500 Subject: 9p-trans_fd: fix trans_fd::p9_conn_destroy() p9_conn_destroy() first kills all current requests by calling p9_conn_cancel(), then waits for the request list to be cleared by waiting on p9_conn->equeue. After that, polling is stopped and the trans is destroyed. This sequence has a few problems. * Read and write works were never cancelled and the p9_conn can be destroyed while the works are running as r/w works remove requests from the list and dereference the p9_conn from them. * The list emptiness wait using p9_conn->equeue wouldn't trigger because p9_conn_cancel() always clears all the lists and the only way the wait can be triggered is to have another task to issue a request between the slim window between p9_conn_cancel() and the wait, which isn't safe under the current implementation with or without the wait. This patch fixes the problem by first stopping poll, which can schedule r/w works, first and cancle r/w works which guarantees that r/w works are not and will not run from that point and then calling p9_conn_cancel() and do the rest of destruction. Signed-off-by: Tejun Heo Signed-off-by: Eric Van Hensbergen --- net/9p/trans_fd.c | 24 +++++------------------- 1 file changed, 5 insertions(+), 19 deletions(-) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index 6a32ffdb9429..ee0d151da31a 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -151,7 +151,6 @@ struct p9_mux_poll_task { * @trans: reference to transport instance for this connection * @tagpool: id accounting for transactions * @err: error state - * @equeue: event wait_q (?) * @req_list: accounting for requests which have been sent * @unsent_req_list: accounting for requests that haven't been sent * @rcall: current response &p9_fcall structure @@ -178,7 +177,6 @@ struct p9_conn { struct p9_trans *trans; struct p9_idpool *tagpool; int err; - wait_queue_head_t equeue; struct list_head req_list; struct list_head unsent_req_list; struct p9_fcall *rcall; @@ -430,7 +428,6 @@ static struct p9_conn *p9_conn_create(struct p9_trans *trans) } m->err = 0; - init_waitqueue_head(&m->equeue); INIT_LIST_HEAD(&m->req_list); INIT_LIST_HEAD(&m->unsent_req_list); m->rcall = NULL; @@ -483,18 +480,13 @@ static void p9_conn_destroy(struct p9_conn *m) { P9_DPRINTK(P9_DEBUG_MUX, "mux %p prev %p next %p\n", m, m->mux_list.prev, m->mux_list.next); - p9_conn_cancel(m, -ECONNRESET); - - if (!list_empty(&m->req_list)) { - /* wait until all processes waiting on this session exit */ - P9_DPRINTK(P9_DEBUG_MUX, - "mux %p waiting for empty request queue\n", m); - wait_event_timeout(m->equeue, (list_empty(&m->req_list)), 5000); - P9_DPRINTK(P9_DEBUG_MUX, "mux %p request queue empty: %d\n", m, - list_empty(&m->req_list)); - } p9_mux_poll_stop(m); + cancel_work_sync(&m->rq); + cancel_work_sync(&m->wq); + + p9_conn_cancel(m, -ECONNRESET); + m->trans = NULL; p9_idpool_destroy(m->tagpool); kfree(m); @@ -840,8 +832,6 @@ static void p9_read_work(struct work_struct *work) (*req->cb) (req, req->cba); else kfree(req->rcall); - - wake_up(&m->equeue); } } else { if (err >= 0 && rcall->id != P9_RFLUSH) @@ -984,8 +974,6 @@ static void p9_mux_flush_cb(struct p9_req *freq, void *a) (*req->cb) (req, req->cba); else kfree(req->rcall); - - wake_up(&m->equeue); } kfree(freq->tcall); @@ -1191,8 +1179,6 @@ void p9_conn_cancel(struct p9_conn *m, int err) else kfree(req->rcall); } - - wake_up(&m->equeue); } /** -- cgit v1.2.2 From 571ffeafffbfdd0b8f2f9d3b991028797ec87e42 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Sep 2008 16:22:23 -0500 Subject: 9p-trans_fd: clean up p9_conn_create() * Use kzalloc() to allocate p9_conn and remove 0/NULL initializations. * Clean up error return paths. Signed-off-by: Tejun Heo Signed-off-by: Eric Van Hensbergen --- net/9p/trans_fd.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index ee0d151da31a..6c88e8983750 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -407,11 +407,11 @@ static void p9_mux_poll_stop(struct p9_conn *m) static struct p9_conn *p9_conn_create(struct p9_trans *trans) { int i, n; - struct p9_conn *m, *mtmp; + struct p9_conn *m; P9_DPRINTK(P9_DEBUG_MUX, "transport %p msize %d\n", trans, trans->msize); - m = kmalloc(sizeof(struct p9_conn), GFP_KERNEL); + m = kzalloc(sizeof(struct p9_conn), GFP_KERNEL); if (!m) return ERR_PTR(-ENOMEM); @@ -422,24 +422,14 @@ static struct p9_conn *p9_conn_create(struct p9_trans *trans) m->trans = trans; m->tagpool = p9_idpool_create(); if (IS_ERR(m->tagpool)) { - mtmp = ERR_PTR(-ENOMEM); kfree(m); - return mtmp; + return ERR_PTR(-ENOMEM); } - m->err = 0; INIT_LIST_HEAD(&m->req_list); INIT_LIST_HEAD(&m->unsent_req_list); - m->rcall = NULL; - m->rpos = 0; - m->rbuf = NULL; - m->wpos = m->wsize = 0; - m->wbuf = NULL; INIT_WORK(&m->rq, p9_read_work); INIT_WORK(&m->wq, p9_write_work); - m->wsched = 0; - memset(&m->poll_waddr, 0, sizeof(m->poll_waddr)); - m->poll_task = NULL; n = p9_mux_poll_start(m); if (n) { kfree(m); @@ -460,10 +450,8 @@ static struct p9_conn *p9_conn_create(struct p9_trans *trans) for (i = 0; i < ARRAY_SIZE(m->poll_waddr); i++) { if (IS_ERR(m->poll_waddr[i])) { p9_mux_poll_stop(m); - mtmp = (void *)m->poll_waddr; /* the error code */ kfree(m); - m = mtmp; - break; + return (void *)m->poll_waddr; /* the error code */ } } -- cgit v1.2.2 From ec3c68f232f6d98b4596c05c1c7551b44c617c5f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Sep 2008 16:22:23 -0500 Subject: 9p-trans_fd: don't do fs segment mangling in p9_fd_poll() p9_fd_poll() is never called with user pointers and f_op->poll() doesn't expect its arguments to be from userland. There's no need to set kernel ds before calling f_op->poll() from p9_fd_poll(). Remove it. Signed-off-by: Tejun Heo Signed-off-by: Eric Van Hensbergen --- net/9p/trans_fd.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index 6c88e8983750..f6d4af16cb19 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -1344,7 +1344,6 @@ p9_fd_poll(struct p9_trans *trans, struct poll_table_struct *pt) { int ret, n; struct p9_trans_fd *ts = NULL; - mm_segment_t oldfs; if (trans && trans->status == Connected) ts = trans->priv; @@ -1358,24 +1357,17 @@ p9_fd_poll(struct p9_trans *trans, struct poll_table_struct *pt) if (!ts->wr->f_op || !ts->wr->f_op->poll) return -EIO; - oldfs = get_fs(); - set_fs(get_ds()); - ret = ts->rd->f_op->poll(ts->rd, pt); if (ret < 0) - goto end; + return ret; if (ts->rd != ts->wr) { n = ts->wr->f_op->poll(ts->wr, pt); - if (n < 0) { - ret = n; - goto end; - } + if (n < 0) + return n; ret = (ret & ~POLLOUT) | (n & ~POLLIN); } -end: - set_fs(oldfs); return ret; } -- cgit v1.2.2 From 206ca50de77033c6cc17d0e14fbb12d119a67b01 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Sep 2008 16:22:23 -0500 Subject: 9p-trans_fd: fix and clean up module init/exit paths trans_fd leaked p9_mux_wq on module unload. Fix it. While at it, collapse p9_mux_global_init() into p9_trans_fd_init(). It's easier to follow this way and the global poll_tasks array is about to removed anyway. Signed-off-by: Tejun Heo Signed-off-by: Eric Van Hensbergen --- net/9p/trans_fd.c | 31 +++++++++++-------------------- 1 file changed, 11 insertions(+), 20 deletions(-) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index f6d4af16cb19..0b4eb5f78356 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -238,22 +238,6 @@ static int p9_conn_rpcnb(struct p9_conn *m, struct p9_fcall *tc, static void p9_conn_cancel(struct p9_conn *m, int err); -static int p9_mux_global_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(p9_mux_poll_tasks); i++) - p9_mux_poll_tasks[i].task = NULL; - - p9_mux_wq = create_workqueue("v9fs"); - if (!p9_mux_wq) { - printk(KERN_WARNING "v9fs: mux: creating workqueue failed\n"); - return -ENOMEM; - } - - return 0; -} - static u16 p9_mux_get_tag(struct p9_conn *m) { int tag; @@ -1616,10 +1600,15 @@ static struct p9_trans_module p9_fd_trans = { int p9_trans_fd_init(void) { - int ret = p9_mux_global_init(); - if (ret) { - printk(KERN_WARNING "9p: starting mux failed\n"); - return ret; + int i; + + for (i = 0; i < ARRAY_SIZE(p9_mux_poll_tasks); i++) + p9_mux_poll_tasks[i].task = NULL; + + p9_mux_wq = create_workqueue("v9fs"); + if (!p9_mux_wq) { + printk(KERN_WARNING "v9fs: mux: creating workqueue failed\n"); + return -ENOMEM; } v9fs_register_trans(&p9_tcp_trans); @@ -1634,4 +1623,6 @@ void p9_trans_fd_exit(void) v9fs_unregister_trans(&p9_tcp_trans); v9fs_unregister_trans(&p9_unix_trans); v9fs_unregister_trans(&p9_fd_trans); + + destroy_workqueue(p9_mux_wq); } -- cgit v1.2.2 From 620678244bc7b83287e2e283ed4fe6b959e94b7d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 24 Sep 2008 16:22:22 -0500 Subject: 9p: introduce missing kfree Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: Eric Van Hensbergen Signed-off-by: Andrew Morton --- net/9p/trans_fd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index 0b4eb5f78356..d652baf5ff91 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -870,8 +870,10 @@ static struct p9_req *p9_send_request(struct p9_conn *m, else n = p9_mux_get_tag(m); - if (n < 0) + if (n < 0) { + kfree(req); return ERR_PTR(-ENOMEM); + } p9_set_tag(tc, n); -- cgit v1.2.2 From 62aa528e0299ffef8e138d9d92d13e631d06c5ff Mon Sep 17 00:00:00 2001 From: Julien Brunel Date: Wed, 24 Sep 2008 16:22:22 -0500 Subject: 9p: use an IS_ERR test rather than a NULL test In case of error, the function p9_client_walk returns an ERR pointer, but never returns a NULL pointer. So a NULL test that comes after an IS_ERR test should be deleted. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @match_bad_null_test@ expression x, E; statement S1,S2; @@ x = p9_client_walk(...) ... when != x = E * if (x != NULL) S1 else S2 // Signed-off-by: Julien Brunel Signed-off-by: Julia Lawall Signed-off-by: Eric Van Hensbergen Signed-off-by: Andrew Morton --- fs/9p/vfs_inode.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index c95295c65045..e83aa5ebe861 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -626,8 +626,7 @@ static struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry, return NULL; error: - if (fid) - p9_client_clunk(fid); + p9_client_clunk(fid); return ERR_PTR(result); } -- cgit v1.2.2 From 16ec4700127d479143c77fd9128dfa17ab572963 Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Wed, 24 Sep 2008 16:22:22 -0500 Subject: 9p: fix put_data error handling Abhishek Kulkarni pointed out an inconsistency in the way errors are returned from p9_put_data. On deeper exploration it seems the error handling for this path was completely wrong. This patch adds checks for allocation problems and propagates errors correctly. Signed-off-by: Eric Van Hensbergen --- net/9p/conv.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/9p/conv.c b/net/9p/conv.c index 44547201f5bc..5ad3a3bd73b2 100644 --- a/net/9p/conv.c +++ b/net/9p/conv.c @@ -451,8 +451,10 @@ p9_put_data(struct cbuf *bufp, const char *data, int count, unsigned char **pdata) { *pdata = buf_alloc(bufp, count); + if (*pdata == NULL) + return -ENOMEM; memmove(*pdata, data, count); - return count; + return 0; } static int @@ -460,6 +462,8 @@ p9_put_user_data(struct cbuf *bufp, const char __user *data, int count, unsigned char **pdata) { *pdata = buf_alloc(bufp, count); + if (*pdata == NULL) + return -ENOMEM; return copy_from_user(*pdata, data, count); } -- cgit v1.2.2 From 8ca31ce52a5cfd03b960fd81a49197ae85d25347 Mon Sep 17 00:00:00 2001 From: Yasuyuki Kozakai Date: Wed, 24 Sep 2008 15:53:39 -0700 Subject: netfilter: ip6t_{hbh,dst}: Rejects not-strict mode on rule insertion The current code ignores rules for internal options in HBH/DST options header in packet processing if 'Not strict' mode is specified (which is not implemented). Clearly it is not expected by user. Kernel should reject HBH/DST rule insertion with 'Not strict' mode in the first place. Signed-off-by: Yasuyuki Kozakai Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv6/netfilter/ip6t_hbh.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/ipv6/netfilter/ip6t_hbh.c b/net/ipv6/netfilter/ip6t_hbh.c index 62e39ace0588..26654b26d7fa 100644 --- a/net/ipv6/netfilter/ip6t_hbh.c +++ b/net/ipv6/netfilter/ip6t_hbh.c @@ -97,8 +97,6 @@ hbh_mt6(const struct sk_buff *skb, const struct net_device *in, hdrlen -= 2; if (!(optinfo->flags & IP6T_OPTS_OPTS)) { return ret; - } else if (optinfo->flags & IP6T_OPTS_NSTRICT) { - pr_debug("Not strict - not implemented"); } else { pr_debug("Strict "); pr_debug("#%d ", optinfo->optsnr); @@ -177,6 +175,12 @@ hbh_mt6_check(const char *tablename, const void *entry, pr_debug("ip6t_opts: unknown flags %X\n", optsinfo->invflags); return false; } + + if (optsinfo->flags & IP6T_OPTS_NSTRICT) { + pr_debug("ip6t_opts: Not strict - not implemented"); + return false; + } + return true; } -- cgit v1.2.2 From b4f151ff899362fec952c45d166252c9912c041f Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 24 Sep 2008 17:48:26 +0100 Subject: MN10300: Move asm-arm/cnt32_to_63.h to include/linux/ Move asm-arm/cnt32_to_63.h to include/linux/ so that MN10300 can make use of it too. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/arm/mach-pxa/time.c | 2 +- arch/arm/mach-sa1100/generic.c | 2 +- arch/arm/mach-versatile/core.c | 2 +- include/linux/cnt32_to_63.h | 80 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 83 insertions(+), 3 deletions(-) create mode 100644 include/linux/cnt32_to_63.h diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 67e18509d7bf..b0d6b32654cf 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -17,9 +17,9 @@ #include #include #include +#include #include -#include #include #include #include diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 1362994c78aa..b422526f6d8b 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -18,9 +18,9 @@ #include #include /* just for sched_clock() - funny that */ #include +#include #include -#include #include #include #include diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index d75e795c893e..b638f10411e8 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -28,8 +28,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h new file mode 100644 index 000000000000..8c0f9505b48c --- /dev/null +++ b/include/linux/cnt32_to_63.h @@ -0,0 +1,80 @@ +/* + * Extend a 32-bit counter to 63 bits + * + * Author: Nicolas Pitre + * Created: December 3, 2006 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#ifndef __LINUX_CNT32_TO_63_H__ +#define __LINUX_CNT32_TO_63_H__ + +#include +#include +#include + +/* this is used only to give gcc a clue about good code generation */ +union cnt32_to_63 { + struct { +#if defined(__LITTLE_ENDIAN) + u32 lo, hi; +#elif defined(__BIG_ENDIAN) + u32 hi, lo; +#endif + }; + u64 val; +}; + + +/** + * cnt32_to_63 - Expand a 32-bit counter to a 63-bit counter + * @cnt_lo: The low part of the counter + * + * Many hardware clock counters are only 32 bits wide and therefore have + * a relatively short period making wrap-arounds rather frequent. This + * is a problem when implementing sched_clock() for example, where a 64-bit + * non-wrapping monotonic value is expected to be returned. + * + * To overcome that limitation, let's extend a 32-bit counter to 63 bits + * in a completely lock free fashion. Bits 0 to 31 of the clock are provided + * by the hardware while bits 32 to 62 are stored in memory. The top bit in + * memory is used to synchronize with the hardware clock half-period. When + * the top bit of both counters (hardware and in memory) differ then the + * memory is updated with a new value, incrementing it when the hardware + * counter wraps around. + * + * Because a word store in memory is atomic then the incremented value will + * always be in synch with the top bit indicating to any potential concurrent + * reader if the value in memory is up to date or not with regards to the + * needed increment. And any race in updating the value in memory is harmless + * as the same value would simply be stored more than once. + * + * The only restriction for the algorithm to work properly is that this + * code must be executed at least once per each half period of the 32-bit + * counter to properly update the state bit in memory. This is usually not a + * problem in practice, but if it is then a kernel timer could be scheduled + * to manage for this code to be executed often enough. + * + * Note that the top bit (bit 63) in the returned value should be considered + * as garbage. It is not cleared here because callers are likely to use a + * multiplier on the returned value which can get rid of the top bit + * implicitly by making the multiplier even, therefore saving on a runtime + * clear-bit instruction. Otherwise caller must remember to clear the top + * bit explicitly. + */ +#define cnt32_to_63(cnt_lo) \ +({ \ + static volatile u32 __m_cnt_hi; \ + union cnt32_to_63 __x; \ + __x.hi = __m_cnt_hi; \ + __x.lo = (cnt_lo); \ + if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ + __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ + __x.val; \ +}) + +#endif -- cgit v1.2.2 From 08ec3c2d45bac41c782acb4e3331ac5881b2c68a Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 24 Sep 2008 17:48:31 +0100 Subject: MN10300: Make sched_clock() report time since boot Make sched_clock() report time since boot rather than time since last timer interrupt. Make sched_clock() expand and scale the 32-bit TSC value running at IOCLK speed (~33MHz) to a 64-bit nanosecond counter, using cnt32_to_63() acquired from the ARM arch and without using slow DIVU instructions every call. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/time.c | 52 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 41 insertions(+), 11 deletions(-) diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c index babb7c2ac377..e4606586f94c 100644 --- a/arch/mn10300/kernel/time.c +++ b/arch/mn10300/kernel/time.c @@ -1,6 +1,6 @@ /* MN10300 Low level time management * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Copyright (C) 2007-2008 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * - Derived from arch/i386/kernel/time.c * @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -40,27 +41,54 @@ static struct irqaction timer_irq = { .name = "timer", }; +static unsigned long sched_clock_multiplier; + /* * scheduler clock - returns current time in nanosec units. */ unsigned long long sched_clock(void) { union { - unsigned long long l; - u32 w[2]; - } quot; + unsigned long long ll; + unsigned l[2]; + } tsc64, result; + unsigned long tsc, tmp; + unsigned product[3]; /* 96-bit intermediate value */ + + /* read the TSC value + */ + tsc = 0 - get_cycles(); /* get_cycles() counts down */ - quot.w[0] = mn10300_last_tsc - get_cycles(); - quot.w[1] = 1000000000; + /* expand to 64-bits. + * - sched_clock() must be called once a minute or better or the + * following will go horribly wrong - see cnt32_to_63() + */ + tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL; - asm("mulu %2,%3,%0,%1" - : "=r"(quot.w[1]), "=r"(quot.w[0]) - : "0"(quot.w[1]), "1"(quot.w[0]) + /* scale the 64-bit TSC value to a nanosecond value via a 96-bit + * intermediate + */ + asm("mulu %2,%0,%3,%0 \n" /* LSW * mult -> 0:%3:%0 */ + "mulu %2,%1,%2,%1 \n" /* MSW * mult -> %2:%1:0 */ + "add %3,%1 \n" + "addc 0,%2 \n" /* result in %2:%1:%0 */ + : "=r"(product[0]), "=r"(product[1]), "=r"(product[2]), "=r"(tmp) + : "0"(tsc64.l[0]), "1"(tsc64.l[1]), "2"(sched_clock_multiplier) : "cc"); - do_div(quot.l, MN10300_TSCCLK); + result.l[0] = product[1] << 16 | product[0] >> 16; + result.l[1] = product[2] << 16 | product[1] >> 16; - return quot.l; + return result.ll; +} + +/* + * initialise the scheduler clock + */ +static void __init mn10300_sched_clock_init(void) +{ + sched_clock_multiplier = + __muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK); } /* @@ -128,4 +156,6 @@ void __init time_init(void) /* start the watchdog timer */ watchdog_go(); #endif + + mn10300_sched_clock_init(); } -- cgit v1.2.2 From 399ccdc1cd4e92e541d4dacbbf18c52bd693418b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 25 Sep 2008 14:51:03 +0200 Subject: ALSA: fix locking in snd_pcm_open*() and snd_rawmidi_open*() The PCM and rawmidi open callbacks have a lock against card->controls_list but it takes a wrong one, card->controls_rwsem, instead of a right one card->ctl_files_rwlock. This patch fixes them. This change also fixes automatically the potential deadlocks due to mm->mmap_sem in munmap and copy_from/to_user, reported by Sitsofe Wheeler: A: snd_ctl_elem_user_tlv(): card->controls_rwsem => mm->mmap_sem B: snd_pcm_open(): card->open_mutex => card->controls_rwsem C: munmap: mm->mmap_sem => snd_pcm_release(): card->open_mutex The patch breaks the chain. Signed-off-by: Takashi Iwai --- sound/core/pcm.c | 4 ++-- sound/core/rawmidi.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/core/pcm.c b/sound/core/pcm.c index 9dd9bc73fe1d..ece25c718e95 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -781,7 +781,7 @@ int snd_pcm_attach_substream(struct snd_pcm *pcm, int stream, return -ENODEV; card = pcm->card; - down_read(&card->controls_rwsem); + read_lock(&card->ctl_files_rwlock); list_for_each_entry(kctl, &card->ctl_files, list) { if (kctl->pid == current->pid) { prefer_subdevice = kctl->prefer_pcm_subdevice; @@ -789,7 +789,7 @@ int snd_pcm_attach_substream(struct snd_pcm *pcm, int stream, break; } } - up_read(&card->controls_rwsem); + read_unlock(&card->ctl_files_rwlock); switch (stream) { case SNDRV_PCM_STREAM_PLAYBACK: diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index f7ea7287c59c..b917a9f981c7 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -418,7 +418,7 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) mutex_lock(&rmidi->open_mutex); while (1) { subdevice = -1; - down_read(&card->controls_rwsem); + read_lock(&card->ctl_files_rwlock); list_for_each_entry(kctl, &card->ctl_files, list) { if (kctl->pid == current->pid) { subdevice = kctl->prefer_rawmidi_subdevice; @@ -426,7 +426,7 @@ static int snd_rawmidi_open(struct inode *inode, struct file *file) break; } } - up_read(&card->controls_rwsem); + read_unlock(&card->ctl_files_rwlock); err = snd_rawmidi_kernel_open(rmidi->card, rmidi->device, subdevice, fflags, rawmidi_file); if (err >= 0) -- cgit v1.2.2 From 24e8fc498e9618338854bfbcf8d1d737e0bf1775 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 25 Sep 2008 17:51:11 +0200 Subject: ALSA: remove unneeded power_mutex lock in snd_pcm_drop The power_mutex lock in snd_pcm_drop may cause a possible deadlock chain, and above all, it's unneeded. Let's get rid of it. Signed-off-by: Takashi Iwai --- sound/core/pcm_native.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index c49b9d9e303c..c487025d3457 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1546,16 +1546,10 @@ static int snd_pcm_drop(struct snd_pcm_substream *substream) card = substream->pcm->card; if (runtime->status->state == SNDRV_PCM_STATE_OPEN || - runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED) + runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED || + runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) return -EBADFD; - snd_power_lock(card); - if (runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) { - result = snd_power_wait(card, SNDRV_CTL_POWER_D0); - if (result < 0) - goto _unlock; - } - snd_pcm_stream_lock_irq(substream); /* resume pause */ if (runtime->status->state == SNDRV_PCM_STATE_PAUSED) @@ -1564,8 +1558,7 @@ static int snd_pcm_drop(struct snd_pcm_substream *substream) snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP); /* runtime->control->appl_ptr = runtime->status->hw_ptr; */ snd_pcm_stream_unlock_irq(substream); - _unlock: - snd_power_unlock(card); + return result; } -- cgit v1.2.2 From 6ef190cc92e33565accff6a320f0e7d90480bfe7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 25 Sep 2008 15:28:08 -0700 Subject: IPoIB: Fix crash when path record fails after path flush Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") changed how paths are flushed on an SM event. This change introduces a problem if the path record query triggered by fails, causing path->ah to become NULL. A later successful path query will then trigger WARN_ON() in path_rec_completion(), and crash because path->ah has already been freed, so the ipoib_put_ah() inside the lock in path_rec_completion() may actually drop the last reference (contrary to the comment that claims this is safe). Fix this by updating path->ah and freeing old_ah only when the path record query is successful. This prevents the neighbour AH and that path AH from getting out of sync. This fixes Reported-by: Rabah Salem Debugged-by: Eli Cohen Signed-off-by: Roland Dreier Signed-off-by: Linus Torvalds --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 1b1df5cc4113..e9ca3cb57d52 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -404,7 +404,7 @@ static void path_rec_completion(int status, struct net_device *dev = path->dev; struct ipoib_dev_priv *priv = netdev_priv(dev); struct ipoib_ah *ah = NULL; - struct ipoib_ah *old_ah; + struct ipoib_ah *old_ah = NULL; struct ipoib_neigh *neigh, *tn; struct sk_buff_head skqueue; struct sk_buff *skb; @@ -428,12 +428,12 @@ static void path_rec_completion(int status, spin_lock_irqsave(&priv->lock, flags); - old_ah = path->ah; - path->ah = ah; - if (ah) { path->pathrec = *pathrec; + old_ah = path->ah; + path->ah = ah; + ipoib_dbg(priv, "created address handle %p for LID 0x%04x, SL %d\n", ah, be16_to_cpu(pathrec->dlid), pathrec->sl); -- cgit v1.2.2 From f1ccd2955157e1aff992f6aaaba0944209076220 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 26 Sep 2008 12:16:46 +1000 Subject: [XFS] Fix extent list corruption in xfs_iext_irec_compact_full(). If we don't move all the records from the next buffer into the current buffer then we need to update the er_extoff field of the next buffer as we shift the remaining records to the start of the buffer. SGI-PV: 987159 SGI-Modid: xfs-linux-melb:xfs-kern:32165a Signed-off-by: Lachlan McIlroy Signed-off-by: Eric Sandeen Signed-off-by: Russell Cattelan --- fs/xfs/xfs_inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 00e80df9dd9d..419cfc2eacb3 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -4584,6 +4584,7 @@ xfs_iext_irec_compact_full( (XFS_LINEAR_EXTS - erp_next->er_extcount) * sizeof(xfs_bmbt_rec_t)); + erp_next->er_extoff += ext_diff; } } -- cgit v1.2.2 From 71a8c87fb300b601eacf7a86cc6c6322fe827bfd Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 26 Sep 2008 12:17:57 +1000 Subject: [XFS] Remove xfs_iext_irec_compact_full() Yet another bug was found in xfs_iext_irec_compact_full() and while the source of the bug was found it wasn't an easy task to track it down because the conditions are very difficult to reproduce. A HUGE thank-you goes to Russell Cattelan and Eric Sandeen for their significant effort in tracking down the source of this corruption. xfs_iext_irec_compact_full() and xfs_iext_irec_compact_pages() are almost identical - they both compact indirect extent lists by moving extents from subsequent buffers into earlier ones. xfs_iext_irec_compact_pages() only moves extents if all of the extents in the next buffer will fit into the empty space in the buffer before it. xfs_iext_irec_compact_full() will go a step further and move part of the next buffer if all the extents wont fit. It will then shift the remaining extents in the next buffer up to the start of the buffer. The bug here was that we did not update er_extoff and this caused extent list corruption. It does not appear that this extra functionality gains us much. Calling xfs_iext_irec_compact_pages() instead will do a good enough job at compacting the indirect list and will be quicker too. For the case in xfs_iext_indirect_to_direct() the total number of extents in the indirect list will fit into one buffer so we will never need the extra functionality of xfs_iext_irec_compact_full() there. Also xfs_iext_irec_compact_pages() doesn't need to do a memmove() (the buffers will never overlap) so we don't want the performance hit that can incur. SGI-PV: 987159 SGI-Modid: xfs-linux-melb:xfs-kern:32166a Signed-off-by: Lachlan McIlroy Signed-off-by: Eric Sandeen --- fs/xfs/xfs_inode.c | 95 ++---------------------------------------------------- 1 file changed, 3 insertions(+), 92 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 419cfc2eacb3..dbd9cef852ec 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -4118,7 +4118,7 @@ xfs_iext_indirect_to_direct( ASSERT(nextents <= XFS_LINEAR_EXTS); size = nextents * sizeof(xfs_bmbt_rec_t); - xfs_iext_irec_compact_full(ifp); + xfs_iext_irec_compact_pages(ifp); ASSERT(ifp->if_real_bytes == XFS_IEXT_BUFSZ); ep = ifp->if_u1.if_ext_irec->er_extbuf; @@ -4449,8 +4449,7 @@ xfs_iext_irec_remove( * compaction policy is as follows: * * Full Compaction: Extents fit into a single page (or inline buffer) - * Full Compaction: Extents occupy less than 10% of allocated space - * Partial Compaction: Extents occupy > 10% and < 50% of allocated space + * Partial Compaction: Extents occupy less than 50% of allocated space * No Compaction: Extents occupy at least 50% of allocated space */ void @@ -4471,8 +4470,6 @@ xfs_iext_irec_compact( xfs_iext_direct_to_inline(ifp, nextents); } else if (nextents <= XFS_LINEAR_EXTS) { xfs_iext_indirect_to_direct(ifp); - } else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 3) { - xfs_iext_irec_compact_full(ifp); } else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 1) { xfs_iext_irec_compact_pages(ifp); } @@ -4496,7 +4493,7 @@ xfs_iext_irec_compact_pages( erp_next = erp + 1; if (erp_next->er_extcount <= (XFS_LINEAR_EXTS - erp->er_extcount)) { - memmove(&erp->er_extbuf[erp->er_extcount], + memcpy(&erp->er_extbuf[erp->er_extcount], erp_next->er_extbuf, erp_next->er_extcount * sizeof(xfs_bmbt_rec_t)); erp->er_extcount += erp_next->er_extcount; @@ -4515,92 +4512,6 @@ xfs_iext_irec_compact_pages( } } -/* - * Fully compact the extent records managed by the indirection array. - */ -void -xfs_iext_irec_compact_full( - xfs_ifork_t *ifp) /* inode fork pointer */ -{ - xfs_bmbt_rec_host_t *ep, *ep_next; /* extent record pointers */ - xfs_ext_irec_t *erp, *erp_next; /* extent irec pointers */ - int erp_idx = 0; /* extent irec index */ - int ext_avail; /* empty entries in ex list */ - int ext_diff; /* number of exts to add */ - int nlists; /* number of irec's (ex lists) */ - - ASSERT(ifp->if_flags & XFS_IFEXTIREC); - - nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; - erp = ifp->if_u1.if_ext_irec; - ep = &erp->er_extbuf[erp->er_extcount]; - erp_next = erp + 1; - ep_next = erp_next->er_extbuf; - - while (erp_idx < nlists - 1) { - /* - * Check how many extent records are available in this irec. - * If there is none skip the whole exercise. - */ - ext_avail = XFS_LINEAR_EXTS - erp->er_extcount; - if (ext_avail) { - - /* - * Copy over as many as possible extent records into - * the previous page. - */ - ext_diff = MIN(ext_avail, erp_next->er_extcount); - memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t)); - erp->er_extcount += ext_diff; - erp_next->er_extcount -= ext_diff; - - /* - * If the next irec is empty now we can simply - * remove it. - */ - if (erp_next->er_extcount == 0) { - /* - * Free page before removing extent record - * so er_extoffs don't get modified in - * xfs_iext_irec_remove. - */ - kmem_free(erp_next->er_extbuf); - erp_next->er_extbuf = NULL; - xfs_iext_irec_remove(ifp, erp_idx + 1); - erp = &ifp->if_u1.if_ext_irec[erp_idx]; - nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; - - /* - * If the next irec is not empty move up the content - * that has not been copied to the previous page to - * the beggining of this one. - */ - } else { - memmove(erp_next->er_extbuf, &ep_next[ext_diff], - erp_next->er_extcount * - sizeof(xfs_bmbt_rec_t)); - ep_next = erp_next->er_extbuf; - memset(&ep_next[erp_next->er_extcount], 0, - (XFS_LINEAR_EXTS - - erp_next->er_extcount) * - sizeof(xfs_bmbt_rec_t)); - erp_next->er_extoff += ext_diff; - } - } - - if (erp->er_extcount == XFS_LINEAR_EXTS) { - erp_idx++; - if (erp_idx < nlists) - erp = &ifp->if_u1.if_ext_irec[erp_idx]; - else - break; - } - ep = &erp->er_extbuf[erp->er_extcount]; - erp_next = erp + 1; - ep_next = erp_next->er_extbuf; - } -} - /* * This is called to update the er_extoff field in the indirection * array when extents have been added or removed from one of the -- cgit v1.2.2 From 18d6522b86d21a04c8ac1ea79747e2e434a956d9 Mon Sep 17 00:00:00 2001 From: Atsuo Igarashi Date: Fri, 26 Sep 2008 10:36:41 -0500 Subject: kgdb: could not write to the last of valid memory with kgdb On the ARM architecture, kgdb will crash the kernel if the last byte of valid memory is written due to a flush_icache_range flushing beyond the memory boundary. Signed-off-by: Atsuo Igarashi Signed-off-by: Jason Wessel --- kernel/kgdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/kgdb.c b/kernel/kgdb.c index eaa21fc9ad1d..949806ab67de 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -488,7 +488,7 @@ static int write_mem_msg(int binary) if (err) return err; if (CACHE_FLUSH_IS_SAFE) - flush_icache_range(addr, addr + length + 1); + flush_icache_range(addr, addr + length); return 0; } -- cgit v1.2.2 From d7161a65341556bacb5e6654e133803f46f51063 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 26 Sep 2008 10:36:41 -0500 Subject: kgdb, x86, arm, mips, powerpc: ignore user space single stepping On the x86 arch, user space single step exceptions should be ignored if they occur in the kernel space, such as ptrace stepping through a system call. First check if it is kgdb that is executing a single step, then ensure it is not an accidental traversal into the user space, while in kgdb, any other time the TIF_SINGLESTEP is set, kgdb should ignore the exception. On x86, arm, mips and powerpc, the kgdb_contthread usage was inconsistent with the way single stepping is implemented in the kgdb core. The arch specific stub should always set the kgdb_cpu_doing_single_step correctly if it is single stepping. This allows kgdb to correctly process an instruction steps if ptrace happens to be requesting an instruction step over a system call. Signed-off-by: Jason Wessel --- arch/arm/kernel/kgdb.c | 2 -- arch/mips/kernel/kgdb.c | 3 +-- arch/powerpc/kernel/kgdb.c | 5 ++--- arch/x86/kernel/kgdb.c | 18 +++++++++++------- kernel/kgdb.c | 8 ++++---- 5 files changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index aaffaecffcd1..ba8ccfede964 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -111,8 +111,6 @@ int kgdb_arch_handle_exception(int exception_vector, int signo, case 'D': case 'k': case 'c': - kgdb_contthread = NULL; - /* * Try to read optional parameter, pc unchanged if no parm. * If this was a compiled breakpoint, we need to move diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index 8f6d58ede33c..6e152c80cd4a 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -236,8 +236,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, atomic_set(&kgdb_cpu_doing_single_step, -1); if (remcom_in_buffer[0] == 's') - if (kgdb_contthread) - atomic_set(&kgdb_cpu_doing_single_step, cpu); + atomic_set(&kgdb_cpu_doing_single_step, cpu); return 0; } diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index b4fdf2f2743c..fe8f71dd0b3f 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -347,9 +347,8 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, linux_regs->msr |= MSR_SE; #endif kgdb_single_step = 1; - if (kgdb_contthread) - atomic_set(&kgdb_cpu_doing_single_step, - raw_smp_processor_id()); + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); } return 0; } diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index f47f0eb886b8..00f7896c9a19 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -378,10 +378,8 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, if (remcomInBuffer[0] == 's') { linux_regs->flags |= X86_EFLAGS_TF; kgdb_single_step = 1; - if (kgdb_contthread) { - atomic_set(&kgdb_cpu_doing_single_step, - raw_smp_processor_id()); - } + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); } get_debugreg(dr6, 6); @@ -466,9 +464,15 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd) case DIE_DEBUG: if (atomic_read(&kgdb_cpu_doing_single_step) == - raw_smp_processor_id() && - user_mode(regs)) - return single_step_cont(regs, args); + raw_smp_processor_id()) { + if (user_mode(regs)) + return single_step_cont(regs, args); + break; + } else if (test_thread_flag(TIF_SINGLESTEP)) + /* This means a user thread is single stepping + * a system call which should be ignored + */ + return NOTIFY_DONE; /* fall through */ default: if (user_mode(regs)) diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 949806ab67de..25d955dbb989 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -1462,7 +1462,7 @@ acquirelock: * Get the passive CPU lock which will hold all the non-primary * CPU in a spin state while the debugger is active */ - if (!kgdb_single_step || !kgdb_contthread) { + if (!kgdb_single_step) { for (i = 0; i < NR_CPUS; i++) atomic_set(&passive_cpu_wait[i], 1); } @@ -1475,7 +1475,7 @@ acquirelock: #ifdef CONFIG_SMP /* Signal the other CPUs to enter kgdb_wait() */ - if ((!kgdb_single_step || !kgdb_contthread) && kgdb_do_roundup) + if ((!kgdb_single_step) && kgdb_do_roundup) kgdb_roundup_cpus(flags); #endif @@ -1494,7 +1494,7 @@ acquirelock: kgdb_post_primary_code(ks->linux_regs, ks->ex_vector, ks->err_code); kgdb_deactivate_sw_breakpoints(); kgdb_single_step = 0; - kgdb_contthread = NULL; + kgdb_contthread = current; exception_level = 0; /* Talk to debugger with gdbserial protocol */ @@ -1508,7 +1508,7 @@ acquirelock: kgdb_info[ks->cpu].task = NULL; atomic_set(&cpu_in_kgdb[ks->cpu], 0); - if (!kgdb_single_step || !kgdb_contthread) { + if (!kgdb_single_step) { for (i = NR_CPUS-1; i >= 0; i--) atomic_set(&passive_cpu_wait[i], 0); /* -- cgit v1.2.2 From 95dbf1dbe39ed336a3e72116c95cfa98dd3457e6 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 26 Sep 2008 10:36:42 -0500 Subject: kgdb, x86_64: gdb serial has BX and DX reversed The BX and DX registers in the gdb serial register packet need to be flipped for gdb to receive the correct data. Signed-off-by: Jason Wessel --- include/asm-x86/kgdb.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-x86/kgdb.h b/include/asm-x86/kgdb.h index 484c47554f3b..e86b3060bdcb 100644 --- a/include/asm-x86/kgdb.h +++ b/include/asm-x86/kgdb.h @@ -42,9 +42,9 @@ enum regnames { #else /* ! CONFIG_X86_32 */ enum regnames { GDB_AX, /* 0 */ - GDB_DX, /* 1 */ + GDB_BX, /* 1 */ GDB_CX, /* 2 */ - GDB_BX, /* 3 */ + GDB_DX, /* 3 */ GDB_SI, /* 4 */ GDB_DI, /* 5 */ GDB_BP, /* 6 */ -- cgit v1.2.2 From 703a1edcd1534468fc18f733c03bd91a65c8c6f0 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 26 Sep 2008 10:36:42 -0500 Subject: kgdb, x86_64: fix PS CS SS registers in gdb serial On x86_64 the gdb serial register structure defines the PS (also known as eflags), CS and SS registers as 4 bytes entities. This patch splits the x86_64 regnames enum into a 32 and 64 version to account for the 32 bit entities in the gdb serial packets. Also the program counter is properly filled in for the sleeping threads. Signed-off-by: Jason Wessel --- arch/x86/kernel/kgdb.c | 25 +++++++++++++++++++++---- include/asm-x86/kgdb.h | 20 +++++++++----------- 2 files changed, 30 insertions(+), 15 deletions(-) diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 00f7896c9a19..8282a2139681 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -69,6 +69,9 @@ static int gdb_x86vector = -1; */ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif gdb_regs[GDB_AX] = regs->ax; gdb_regs[GDB_BX] = regs->bx; gdb_regs[GDB_CX] = regs->cx; @@ -76,9 +79,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_SI] = regs->si; gdb_regs[GDB_DI] = regs->di; gdb_regs[GDB_BP] = regs->bp; - gdb_regs[GDB_PS] = regs->flags; gdb_regs[GDB_PC] = regs->ip; #ifdef CONFIG_X86_32 + gdb_regs[GDB_PS] = regs->flags; gdb_regs[GDB_DS] = regs->ds; gdb_regs[GDB_ES] = regs->es; gdb_regs[GDB_CS] = regs->cs; @@ -94,6 +97,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_R13] = regs->r13; gdb_regs[GDB_R14] = regs->r14; gdb_regs[GDB_R15] = regs->r15; + gdb_regs32[GDB_PS] = regs->flags; + gdb_regs32[GDB_CS] = regs->cs; + gdb_regs32[GDB_SS] = regs->ss; #endif gdb_regs[GDB_SP] = regs->sp; } @@ -112,6 +118,9 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) */ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif gdb_regs[GDB_AX] = 0; gdb_regs[GDB_BX] = 0; gdb_regs[GDB_CX] = 0; @@ -129,8 +138,10 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) gdb_regs[GDB_FS] = 0xFFFF; gdb_regs[GDB_GS] = 0xFFFF; #else - gdb_regs[GDB_PS] = *(unsigned long *)(p->thread.sp + 8); - gdb_regs[GDB_PC] = 0; + gdb_regs32[GDB_PS] = *(unsigned long *)(p->thread.sp + 8); + gdb_regs32[GDB_CS] = __KERNEL_CS; + gdb_regs32[GDB_SS] = __KERNEL_DS; + gdb_regs[GDB_PC] = p->thread.ip; gdb_regs[GDB_R8] = 0; gdb_regs[GDB_R9] = 0; gdb_regs[GDB_R10] = 0; @@ -153,6 +164,9 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) */ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) { +#ifndef CONFIG_X86_32 + u32 *gdb_regs32 = (u32 *)gdb_regs; +#endif regs->ax = gdb_regs[GDB_AX]; regs->bx = gdb_regs[GDB_BX]; regs->cx = gdb_regs[GDB_CX]; @@ -160,9 +174,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) regs->si = gdb_regs[GDB_SI]; regs->di = gdb_regs[GDB_DI]; regs->bp = gdb_regs[GDB_BP]; - regs->flags = gdb_regs[GDB_PS]; regs->ip = gdb_regs[GDB_PC]; #ifdef CONFIG_X86_32 + regs->flags = gdb_regs[GDB_PS]; regs->ds = gdb_regs[GDB_DS]; regs->es = gdb_regs[GDB_ES]; regs->cs = gdb_regs[GDB_CS]; @@ -175,6 +189,9 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) regs->r13 = gdb_regs[GDB_R13]; regs->r14 = gdb_regs[GDB_R14]; regs->r15 = gdb_regs[GDB_R15]; + regs->flags = gdb_regs32[GDB_PS]; + regs->cs = gdb_regs32[GDB_CS]; + regs->ss = gdb_regs32[GDB_SS]; #endif } diff --git a/include/asm-x86/kgdb.h b/include/asm-x86/kgdb.h index e86b3060bdcb..94d63db10365 100644 --- a/include/asm-x86/kgdb.h +++ b/include/asm-x86/kgdb.h @@ -39,8 +39,9 @@ enum regnames { GDB_FS, /* 14 */ GDB_GS, /* 15 */ }; +#define NUMREGBYTES ((GDB_GS+1)*4) #else /* ! CONFIG_X86_32 */ -enum regnames { +enum regnames64 { GDB_AX, /* 0 */ GDB_BX, /* 1 */ GDB_CX, /* 2 */ @@ -58,18 +59,15 @@ enum regnames { GDB_R14, /* 14 */ GDB_R15, /* 15 */ GDB_PC, /* 16 */ - GDB_PS, /* 17 */ }; -#endif /* CONFIG_X86_32 */ -/* - * Number of bytes of registers: - */ -#ifdef CONFIG_X86_32 -# define NUMREGBYTES 64 -#else -# define NUMREGBYTES ((GDB_PS+1)*8) -#endif +enum regnames32 { + GDB_PS = 34, + GDB_CS, + GDB_SS, +}; +#define NUMREGBYTES ((GDB_SS+1)*4) +#endif /* CONFIG_X86_32 */ static inline void arch_kgdb_breakpoint(void) { -- cgit v1.2.2 From 0dca0fd2bfeb99738708d6c9117994ebf398e72c Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 26 Sep 2008 10:36:42 -0500 Subject: kgdboc,tty: Fix tty polling search to use name correctly The tty_find_polling_driver() routine did not correctly check the base part of the tty name. This can lead to kgdboc selecting an incorrect driver, as well as accepting a completely invalid tty such as "echo ffff0 > /sys/module/kgdboc/parameters/kgdboc". Signed-off-by: Jason Wessel --- drivers/char/tty_io.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index daeb8f766971..e4dce8709541 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -695,13 +695,23 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line) { struct tty_driver *p, *res = NULL; int tty_line = 0; + int len; char *str; + for (str = name; *str; str++) + if ((*str >= '0' && *str <= '9') || *str == ',') + break; + if (!*str) + return NULL; + + len = str - name; + tty_line = simple_strtoul(str, &str, 10); + mutex_lock(&tty_mutex); /* Search through the tty devices to look for a match */ list_for_each_entry(p, &tty_drivers, tty_drivers) { - str = name + strlen(p->name); - tty_line = simple_strtoul(str, &str, 10); + if (strncmp(name, p->name, len) != 0) + continue; if (*str == ',') str++; if (*str == '\0') -- cgit v1.2.2 From bc173c5789e1fc6065fd378edc815914b40ee86b Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 26 Sep 2008 16:22:58 +0100 Subject: ARM: Delete ARM's own cnt32_to_63.h Delete ARM's own cnt32_to_63.h as the copy in include/linux/ should now be used instead. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/arm/include/asm/cnt32_to_63.h | 78 -------------------------------------- 1 file changed, 78 deletions(-) delete mode 100644 arch/arm/include/asm/cnt32_to_63.h diff --git a/arch/arm/include/asm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h deleted file mode 100644 index 480c873fa746..000000000000 --- a/arch/arm/include/asm/cnt32_to_63.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits - * - * Author: Nicolas Pitre - * Created: December 3, 2006 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - */ - -#ifndef __INCLUDE_CNT32_TO_63_H__ -#define __INCLUDE_CNT32_TO_63_H__ - -#include -#include -#include - -/* - * Prototype: u64 cnt32_to_63(u32 cnt) - * Many hardware clock counters are only 32 bits wide and therefore have - * a relatively short period making wrap-arounds rather frequent. This - * is a problem when implementing sched_clock() for example, where a 64-bit - * non-wrapping monotonic value is expected to be returned. - * - * To overcome that limitation, let's extend a 32-bit counter to 63 bits - * in a completely lock free fashion. Bits 0 to 31 of the clock are provided - * by the hardware while bits 32 to 62 are stored in memory. The top bit in - * memory is used to synchronize with the hardware clock half-period. When - * the top bit of both counters (hardware and in memory) differ then the - * memory is updated with a new value, incrementing it when the hardware - * counter wraps around. - * - * Because a word store in memory is atomic then the incremented value will - * always be in synch with the top bit indicating to any potential concurrent - * reader if the value in memory is up to date or not with regards to the - * needed increment. And any race in updating the value in memory is harmless - * as the same value would simply be stored more than once. - * - * The only restriction for the algorithm to work properly is that this - * code must be executed at least once per each half period of the 32-bit - * counter to properly update the state bit in memory. This is usually not a - * problem in practice, but if it is then a kernel timer could be scheduled - * to manage for this code to be executed often enough. - * - * Note that the top bit (bit 63) in the returned value should be considered - * as garbage. It is not cleared here because callers are likely to use a - * multiplier on the returned value which can get rid of the top bit - * implicitly by making the multiplier even, therefore saving on a runtime - * clear-bit instruction. Otherwise caller must remember to clear the top - * bit explicitly. - */ - -/* this is used only to give gcc a clue about good code generation */ -typedef union { - struct { -#if defined(__LITTLE_ENDIAN) - u32 lo, hi; -#elif defined(__BIG_ENDIAN) - u32 hi, lo; -#endif - }; - u64 val; -} cnt32_to_63_t; - -#define cnt32_to_63(cnt_lo) \ -({ \ - static volatile u32 __m_cnt_hi = 0; \ - cnt32_to_63_t __x; \ - __x.hi = __m_cnt_hi; \ - __x.lo = (cnt_lo); \ - if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ - __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ - __x.val; \ -}) - -#endif -- cgit v1.2.2 From 1575da9ee4804ca889f32f8567dd7965e6fe4abc Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Sep 2008 14:57:11 +0900 Subject: m32r: remove the unused NOHIGHMEM option Remove the unused NOHIGHMEM option. Reviewed-by: Robert P. J. Day Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Hirokazu Takata --- arch/m32r/Kconfig | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index a5f864c445b2..0266519491a4 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -216,10 +216,6 @@ config MEMORY_SIZE default "01000000" if PLAT_M32104UT default "00800000" if PLAT_OAKS32R -config NOHIGHMEM - bool - default y - config ARCH_DISCONTIGMEM_ENABLE bool "Internal RAM Support" depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104 -- cgit v1.2.2 From 1b20b093e7f81ff8cb322773684b260d1487b610 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Sep 2008 14:58:54 +0900 Subject: m32r: don't offer CONFIG_ISA As far as I know no M32R hardware actually has ISA slots. And ISA drivers don't compile on M32R. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Hirokazu Takata --- arch/m32r/Kconfig | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 0266519491a4..f57113f1f892 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -406,11 +406,7 @@ config PCI_DIRECT source "drivers/pci/Kconfig" config ISA - bool "ISA support" - help - Find out whether you have ISA slots on your motherboard. ISA is the - name of a bus system, i.e. the way the CPU talks to the other stuff - inside your box. If you have ISA, say Y, otherwise N. + bool source "drivers/pcmcia/Kconfig" -- cgit v1.2.2 From affa6b120fa895e2bed0e131282fe89c05da1008 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Sep 2008 14:59:57 +0900 Subject: m32r: export empty_zero_page ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined! Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/m32r_ksyms.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c index 16bcb189a383..22624b51d4d3 100644 --- a/arch/m32r/kernel/m32r_ksyms.c +++ b/arch/m32r/kernel/m32r_ksyms.c @@ -14,6 +14,7 @@ #include #include #include +#include /* platform dependent support */ EXPORT_SYMBOL(boot_cpu_data); @@ -65,6 +66,7 @@ EXPORT_SYMBOL(memset); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(strlen); +EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(_inb); EXPORT_SYMBOL(_inw); -- cgit v1.2.2 From 4b65fd41807dec1484003a7618c492477511509e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Sep 2008 15:01:15 +0900 Subject: m32r: export __ndelay ERROR: "__ndelay" [drivers/spi/spi_bitbang.ko] undefined! Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Hirokazu Takata --- arch/m32r/lib/delay.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c index 59bfc34e0d9f..ced549be80f5 100644 --- a/arch/m32r/lib/delay.c +++ b/arch/m32r/lib/delay.c @@ -6,6 +6,7 @@ */ #include +#include #ifdef CONFIG_SMP #include #include @@ -121,3 +122,4 @@ void __ndelay(unsigned long nsecs) { __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */ } +EXPORT_SYMBOL(__ndelay); -- cgit v1.2.2 From 81e4807303c416a0defdce8b23a6204416d33280 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Sep 2008 15:01:47 +0900 Subject: m32r/kernel/: cleanups This patch contains the following cleanups: - make the following needlessly global code static: - entry.S: resume_userspace - process.c: pm_idle - process.c: default_idle() - smp.c: send_IPI_allbutself() - time.c: timer_interrupt() - time.c: struct irq0 - traps.c: set_eit_vector_entries() - traps.c: kstack_depth_to_print - traps.c: show_trace() - traps.c: die_lock - remove the following unused code: - head.S: startup_32 - process.c: hlt_counter - process.c: disable_hlt() - process.c: enable_hlt() - process.c: dump_task_regs() - remove the following variables and their usages since they were always 0: - irq.c: irq_err_count - irq.c: irq_mis_count Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/entry.S | 2 +- arch/m32r/kernel/head.S | 1 - arch/m32r/kernel/irq.c | 6 ------ arch/m32r/kernel/process.c | 30 ++---------------------------- arch/m32r/kernel/smp.c | 4 ++-- arch/m32r/kernel/time.c | 5 ++--- arch/m32r/kernel/traps.c | 8 ++++---- 7 files changed, 11 insertions(+), 45 deletions(-) diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S index d4eaa2fd1818..612d35b082a6 100644 --- a/arch/m32r/kernel/entry.S +++ b/arch/m32r/kernel/entry.S @@ -143,7 +143,7 @@ ret_from_intr: and3 r4, r4, #0x8000 ; check BSM bit #endif beqz r4, resume_kernel -ENTRY(resume_userspace) +resume_userspace: DISABLE_INTERRUPTS(r4) ; make sure we don't miss an interrupt ; setting need_resched or sigpending ; between sampling and the iret diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S index dab7436d7bbe..40180778a5c7 100644 --- a/arch/m32r/kernel/head.S +++ b/arch/m32r/kernel/head.S @@ -29,7 +29,6 @@ __INITDATA .global _end ENTRY(stext) ENTRY(_stext) -ENTRY(startup_32) /* Setup up the stack pointer */ LDIMM (r0, spi_stack_top) LDIMM (r1, spu_stack_top) diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c index d0c5b0b7da2f..2aeae4670098 100644 --- a/arch/m32r/kernel/irq.c +++ b/arch/m32r/kernel/irq.c @@ -22,9 +22,6 @@ #include #include -atomic_t irq_err_count; -atomic_t irq_mis_count; - /* * Generic, controller-independent functions: */ @@ -63,9 +60,6 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { - seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); - seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); } return 0; } diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c index a689e2978b6e..5be4faaf5b1c 100644 --- a/arch/m32r/kernel/process.c +++ b/arch/m32r/kernel/process.c @@ -35,8 +35,6 @@ #include -static int hlt_counter=0; - /* * Return saved PC of a blocked thread. */ @@ -48,31 +46,16 @@ unsigned long thread_saved_pc(struct task_struct *tsk) /* * Powermanagement idle function, if any.. */ -void (*pm_idle)(void) = NULL; -EXPORT_SYMBOL(pm_idle); +static void (*pm_idle)(void) = NULL; void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); -void disable_hlt(void) -{ - hlt_counter++; -} - -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} - -EXPORT_SYMBOL(enable_hlt); - /* * We use this is we don't have any better * idle routine.. */ -void default_idle(void) +static void default_idle(void) { /* M32R_FIXME: Please use "cpu_sleep" mode. */ cpu_relax(); @@ -260,15 +243,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long spu, return 0; } -/* - * Capture the user space registers if the task is not running (in user space) - */ -int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) -{ - /* M32R_FIXME */ - return 1; -} - asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2, unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, struct pt_regs regs) diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index 7577f971ea4e..929e5c9d3ad9 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -84,7 +84,7 @@ void smp_send_timer(void); void smp_ipi_timer_interrupt(struct pt_regs *); void smp_local_timer_interrupt(void); -void send_IPI_allbutself(int, int); +static void send_IPI_allbutself(int, int); static void send_IPI_mask(cpumask_t, int, int); unsigned long send_IPI_mask_phys(cpumask_t, int, int); @@ -722,7 +722,7 @@ void smp_local_timer_interrupt(void) * ---------- --- -------------------------------------------------------- * *==========================================================================*/ -void send_IPI_allbutself(int ipi_num, int try) +static void send_IPI_allbutself(int ipi_num, int try) { cpumask_t cpumask; diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index 994cc1556355..6ea017727cce 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -34,7 +34,6 @@ #include #ifdef CONFIG_SMP -extern void send_IPI_allbutself(int, int); extern void smp_local_timer_interrupt(void); #endif @@ -188,7 +187,7 @@ static long last_rtc_update = 0; * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -irqreturn_t timer_interrupt(int irq, void *dev_id) +static irqreturn_t timer_interrupt(int irq, void *dev_id) { #ifndef CONFIG_SMP profile_tick(CPU_PROFILING); @@ -228,7 +227,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -struct irqaction irq0 = { +static struct irqaction irq0 = { .handler = timer_interrupt, .flags = IRQF_DISABLED, .mask = CPU_MASK_NONE, diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c index 46159a4e644b..03b14e55cd89 100644 --- a/arch/m32r/kernel/traps.c +++ b/arch/m32r/kernel/traps.c @@ -61,7 +61,7 @@ extern unsigned long eit_vector[]; ((unsigned long)func - (unsigned long)eit_vector - entry*4)/4 \ + 0xff000000UL -void set_eit_vector_entries(void) +static void set_eit_vector_entries(void) { extern void default_eit_handler(void); extern void system_call(void); @@ -121,9 +121,9 @@ void __init trap_init(void) cpu_init(); } -int kstack_depth_to_print = 24; +static int kstack_depth_to_print = 24; -void show_trace(struct task_struct *task, unsigned long *stack) +static void show_trace(struct task_struct *task, unsigned long *stack) { unsigned long addr; @@ -224,7 +224,7 @@ bad: printk("\n"); } -DEFINE_SPINLOCK(die_lock); +static DEFINE_SPINLOCK(die_lock); void die(const char * str, struct pt_regs * regs, long err) { -- cgit v1.2.2 From 19506fc51852e859bb08ab5abbdb8fd02b7392f2 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 25 Sep 2008 16:45:10 +0200 Subject: [MIPS] au1000: Make sure GPIO value is zero or one David Brownell wrote: > The problem is that "value" is zero-or-nonzero. > This code wrongly assumes it's zero-or-one. > Possible fix: "((!!value) << gpio)". Signed-off-by: Bruno Randolf Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index 1f058434b726..e660ddd611c4 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -48,7 +48,7 @@ static void au1xxx_gpio2_write(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); } static int au1xxx_gpio2_direction_input(unsigned gpio) @@ -62,7 +62,7 @@ static int au1xxx_gpio2_direction_output(unsigned gpio, int value) { gpio -= AU1XXX_GPIO_BASE; gpio2->dir |= 0x01 << gpio; - gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio); + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio); return 0; } -- cgit v1.2.2 From f4d15f1c877644a604f8c8c3d094c13f9f8bdcf2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 27 Sep 2008 15:05:06 +0100 Subject: [MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error. pcibios_map_irq is no way of returning an error but on IP27 an interrupt is possibly not routable when running out of resources. So do the interrupt routing at pcibios_enable_device time. Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-ip27.c | 40 +++++++++++++++++++++++++++++++--------- 1 file changed, 31 insertions(+), 9 deletions(-) diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index bd78368c82bf..f97ab1461012 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -142,26 +142,48 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) * on any one of the hubs connected to its xbow. */ int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return 0; +} + +/* Most MIPS systems have straight-forward swizzling needs. */ +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev) +{ + while (dev->bus->parent) { + /* Move up the chain of bridges. */ + dev = dev->bus->self; + } + + return dev; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) { struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); - int irq = bc->pci_int[slot]; + struct pci_dev *rdev = bridge_root_dev(dev); + int slot = PCI_SLOT(rdev->devfn); + int irq; + irq = bc->pci_int[slot]; if (irq == -1) { - irq = bc->pci_int[slot] = request_bridge_irq(bc); + irq = request_bridge_irq(bc); if (irq < 0) - panic("Can't allocate interrupt for PCI device %s\n", - pci_name(dev)); + return irq; + + bc->pci_int[slot] = irq; } irq_to_bridge[irq] = bc; irq_to_slot[irq] = slot; - return irq; -} + dev->irq = irq; -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ return 0; } -- cgit v1.2.2 From 2dc42b47a7886bdc87514990c68ecdf8de61e653 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Sat, 27 Sep 2008 16:06:16 +0200 Subject: [MIPS] BCM47xx: Fix build error due to missing PCI functions This patch defines pcibios_map_irq() and pcibios_plat_dev_init() for the BCM47xx platform. It fixes the regression introduced by commit aab547ce0d1493d400b6468c521a0137cd8c1edf. Signed-off-by: Aurelien Jarno Signed-off-by: Ralf Baechle --- arch/mips/pci/Makefile | 1 + arch/mips/pci/pci-bcm47xx.c | 60 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 61 insertions(+) create mode 100644 arch/mips/pci/pci-bcm47xx.c diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 15e01aec37fd..c8c32f417b6c 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o +obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o # # These are still pretty much in the old state, watch, go blind. diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c new file mode 100644 index 000000000000..bea9b6cdfdbf --- /dev/null +++ b/arch/mips/pci/pci-bcm47xx.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2008 Aurelien Jarno + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return 0; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + int res; + u8 slot, pin; + + res = ssb_pcibios_plat_dev_init(dev); + if (res < 0) { + printk(KERN_ALERT "PCI: Failed to init device %s\n", + pci_name(dev)); + return res; + } + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + slot = PCI_SLOT(dev->devfn); + res = ssb_pcibios_map_irq(dev, slot, pin); + + /* IRQ-0 and IRQ-1 are software interrupts. */ + if (res < 2) { + printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n", + pci_name(dev)); + return res; + } + + dev->irq = res; + return 0; +} + -- cgit v1.2.2 From ac82da3381fc663dbda31612a0bff60bc41676a3 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Fri, 26 Sep 2008 22:27:11 +0200 Subject: [SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devices For SSB_BUSTYPE_SSB type devices, we need to initialize dma_mask using coherent_dma_mask so that calls to dma_set_mask() succeed. It fixes the regression on the b44 driver introduced by commit f225763a7d6c92c4932dbd528437997078496fcc Signed-off-by: Aurelien Jarno Signed-off-by: Ralf Baechle --- drivers/ssb/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 87ab2443e66d..0ffabf5c0b60 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -471,6 +471,7 @@ static int ssb_devices_register(struct ssb_bus *bus) #endif break; case SSB_BUSTYPE_SSB: + dev->dma_mask = &dev->coherent_dma_mask; break; } -- cgit v1.2.2 From 3d977760b9478538821a75dd5eb74d0f2a2b01e3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 27 Sep 2008 19:32:16 +0200 Subject: Swarm: Fix crash due to missing initialization If things are just right this will result in the hws[0]->parent being passed to ide_host_add() being non-zero and an ooops a little later. Signed-off-by: Ralf Baechle Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/mips/swarm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index badf79fc9e3a..39c9ee995857 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -107,6 +107,7 @@ static int __devinit swarm_ide_probe(struct device *dev) base = ioremap(offset, size); + memset(&hw, 0, sizeof(hw)); for (i = 0; i <= 7; i++) hw.io_ports_array[i] = (unsigned long)(base + ((0x1f0 + i) << 5)); -- cgit v1.2.2 From 801bd32e205ca6ef78dcaf80121f1eccb89b8c1e Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 27 Sep 2008 19:32:17 +0200 Subject: ide-tape: fix vendor strings Remove superfluous two bytes from each string buffer and add proper length format specifiers. Signed-off-by: Borislav Petkov Tested-by: Mark de Wever Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1bce84b56630..3833189144ed 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2338,7 +2338,7 @@ static void idetape_get_inquiry_results(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc pc; - char fw_rev[6], vendor_id[10], product_id[18]; + char fw_rev[4], vendor_id[8], product_id[16]; idetape_create_inquiry_cmd(&pc); if (idetape_queue_pc_tail(drive, &pc)) { @@ -2350,11 +2350,11 @@ static void idetape_get_inquiry_results(ide_drive_t *drive) memcpy(product_id, &pc.buf[16], 16); memcpy(fw_rev, &pc.buf[32], 4); - ide_fixstring(vendor_id, 10, 0); - ide_fixstring(product_id, 18, 0); - ide_fixstring(fw_rev, 6, 0); + ide_fixstring(vendor_id, 8, 0); + ide_fixstring(product_id, 16, 0); + ide_fixstring(fw_rev, 4, 0); - printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n", + printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n", drive->name, tape->name, vendor_id, product_id, fw_rev); } -- cgit v1.2.2 From 278ecfb8f4100c0edc2bc77695b591ea16388829 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 27 Sep 2008 19:32:17 +0200 Subject: ide: note that IDE generic may prevent other drivers from attaching Enabling IDE generic may prevent ATA controllers located on legacy ports from being attached to more proper driver or can prevent other controllers which share the IRQ from working. Note it in the help message. Signed-off-by: Tejun Heo Cc: xerces8 Cc: Jeff Garzik Cc: stein@hermes.si [bart: s/will grab/may grab/ since Borislav has fixed PCI-case for .28] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index fc735ab08ff4..8e93a797c93d 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -292,6 +292,20 @@ config IDE_GENERIC tristate "generic/default IDE chipset support" depends on ALPHA || X86 || IA64 || M32R || MIPS help + This is the generic IDE driver. This driver attaches to the + fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and + so on). Please note that if this driver is built into the + kernel or loaded before other ATA (IDE or libata) drivers + and the controller is located at legacy ports, this driver + may grab those ports and thus can prevent the controller + specific driver from attaching. + + Also, currently, IDE generic doesn't allow IRQ sharing + meaning that the IRQs it grabs won't be available to other + controllers sharing those IRQs which usually makes drivers + for those controllers fail. Generally, it's not a good idea + to load IDE generic driver on modern systems. + If unsure, say N. config BLK_DEV_PLATFORM -- cgit v1.2.2 From d0eb40628e29c2bb3b5f8242b1d2f50b1a88d9da Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Sat, 27 Sep 2008 19:32:17 +0200 Subject: cdrom: update ioctl documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Correct copy-paste problem: CDROMCLOSETRAY is about closing the tray, not opening it. Signed-off-by: Márton Németh Signed-off-by: Andrew Morton Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/ioctl/cdrom.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/ioctl/cdrom.txt b/Documentation/ioctl/cdrom.txt index 62d4af44ec4a..59df81c8da2b 100644 --- a/Documentation/ioctl/cdrom.txt +++ b/Documentation/ioctl/cdrom.txt @@ -271,14 +271,14 @@ CDROMCLOSETRAY pendant of CDROMEJECT usage: - ioctl(fd, CDROMEJECT, 0); + ioctl(fd, CDROMCLOSETRAY, 0); inputs: none outputs: none error returns: - ENOSYS cd drive not capable of ejecting + ENOSYS cd drive not capable of closing the tray EBUSY other processes are accessing drive, or door is locked notes: -- cgit v1.2.2 From c9eeb248f3b44939532a9716bc06413383aa5d63 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 24 Sep 2008 12:00:22 +0300 Subject: [SCSI] qlogicpti: fix sg list traversal error in continuation entries The current sg list traversal logic for the continuation entries doesn't advance the list pointer once all seven slots are used, so the next continuation entry (if there is one) wrongly begins again at the start of the sg list. Fix by advancing the sg pointer after the for_each_sg(). Reported-by: Meelis Roos Cc: David Miller Signed-off-by: James Bottomley --- drivers/scsi/qlogicpti.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index 4a1cf6377f6c..905350896725 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -914,6 +914,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, ds[i].d_count = sg_dma_len(s); } sg_count -= n; + sg = s; } } else { cmd->dataseg[0].d_base = 0; -- cgit v1.2.2 From 4c1eb90a0908c0c60db2169dce08fb672e7582f1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 28 Sep 2008 07:39:01 +0900 Subject: sata_nv: reinstate nv_hardreset() for non generic controllers Commit 2fd673ecf0378ddeeeb87b3605e50212e0c0ddc6 which tried to remove hardreset for generic accidentally removed it for all flavors as all others were inheriting from nv_generic_ops. This patch reinstates nv_hardreset() and puts it into nv_common_ops which all flavors inherit from. nv_generic_ops now inherits from nv_common_ops and overrides .hardreset to ATA_OP_NULL. While at it, explain why nv_hardreset and ATA_OP_NULL override are necessary. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 46 ++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 40 insertions(+), 6 deletions(-) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 1e1f3f3757ae..14601dc05e41 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -309,6 +309,8 @@ static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); static void nv_ck804_freeze(struct ata_port *ap); static void nv_ck804_thaw(struct ata_port *ap); +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static int nv_adma_slave_config(struct scsi_device *sdev); static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc); static void nv_adma_qc_prep(struct ata_queued_cmd *qc); @@ -403,28 +405,45 @@ static struct scsi_host_template nv_swncq_sht = { .slave_configure = nv_swncq_slave_config, }; -static struct ata_port_operations nv_generic_ops = { +/* OSDL bz3352 reports that some nv controllers can't determine device + * signature reliably and nv_hardreset is implemented to work around + * the problem. This was reported on nf3 and it's unclear whether any + * other controllers are affected. However, the workaround has been + * applied to all variants and there isn't much to gain by trying to + * find out exactly which ones are affected at this point especially + * because NV has moved over to ahci for newer controllers. + */ +static struct ata_port_operations nv_common_ops = { .inherits = &ata_bmdma_port_ops, - .hardreset = ATA_OP_NULL, + .hardreset = nv_hardreset, .scr_read = nv_scr_read, .scr_write = nv_scr_write, }; +/* OSDL bz11195 reports that link doesn't come online after hardreset + * on generic nv's and there have been several other similar reports + * on linux-ide. Disable hardreset for generic nv's. + */ +static struct ata_port_operations nv_generic_ops = { + .inherits = &nv_common_ops, + .hardreset = ATA_OP_NULL, +}; + static struct ata_port_operations nv_nf2_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_common_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, }; static struct ata_port_operations nv_ck804_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_common_ops, .freeze = nv_ck804_freeze, .thaw = nv_ck804_thaw, .host_stop = nv_ck804_host_stop, }; static struct ata_port_operations nv_adma_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_common_ops, .check_atapi_dma = nv_adma_check_atapi_dma, .sff_tf_read = nv_adma_tf_read, @@ -448,7 +467,7 @@ static struct ata_port_operations nv_adma_ops = { }; static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_common_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -1586,6 +1605,21 @@ static void nv_mcp55_thaw(struct ata_port *ap) ata_sff_thaw(ap); } +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int rc; + + /* SATA hardreset fails to retrieve proper device signature on + * some controllers. Request follow up SRST. For more info, + * see http://bugzilla.kernel.org/show_bug.cgi?id=3352 + */ + rc = sata_sff_hardreset(link, class, deadline); + if (rc) + return rc; + return -EAGAIN; +} + static void nv_adma_error_handler(struct ata_port *ap) { struct nv_adma_port_priv *pp = ap->private_data; -- cgit v1.2.2 From 7e6cfb54b1ff4b64d74aa8cd191204c9598c073d Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Mon, 29 Sep 2008 09:38:55 +0200 Subject: scsi: fix fall out of sg-chaining patch in qlogicpti Boaz writes: "I've reviewed all patches since Matthew's, and I find one small problem. In the load_cmd() there is a compound loop where the first 4 sg's are set then the rest are set into a memory structure in group of 7 sg's. Well the second 7-group and on is a bug because sg pointer does not advance. This is a fall out from Jens's patch." The reporter, Meelis Roos , verified that this patch does indeed fix his problem with qlogicpti. Signed-off-by: Jens Axboe --- drivers/scsi/qlogicpti.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index 4a1cf6377f6c..905350896725 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -914,6 +914,7 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, ds[i].d_count = sg_dma_len(s); } sg_count -= n; + sg = s; } } else { cmd->dataseg[0].d_base = 0; -- cgit v1.2.2 From ec2cd95f340fb07b905839ee219b3846ecf58396 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 29 Jul 2008 16:35:52 -0500 Subject: ALSA: make the CS4270 driver a new-style I2C driver Update the CS4270 ALSA device driver to use the new-style I2C interface. Starting with the 2.6.27 PowerPC kernel, I2C devices that have entries in the device trees can no longer be probed by old-style I2C drivers. The device tree for Freescale MPC8610 HPCD has included an entry for the CS4270 since 2.6.25, but that entry was previously ignored by the PowerPC I2C subsystem. Since that's no longer the case, the best solution is to update the CS4270 driver to a new-style interface, rather than try to revert the behavior of new PowerPC I2C subsystem. Signed-off-by: Timur Tabi Signed-off-by: Takashi Iwai --- sound/soc/codecs/cs4270.c | 71 ++++++++++------------------------------------- 1 file changed, 15 insertions(+), 56 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 9deb8c74fdfd..82d94f00aa45 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -490,34 +490,7 @@ static int cs4270_mute(struct snd_soc_dai *dai, int mute) #endif -static int cs4270_i2c_probe(struct i2c_adapter *adap, int addr, int kind); - -/* - * Notify the driver that a new I2C bus has been found. - * - * This function is called for each I2C bus in the system. The function - * then asks the I2C subsystem to probe that bus at the addresses on which - * our device (the CS4270) could exist. If a device is found at one of - * those addresses, then our probe function (cs4270_i2c_probe) is called. - */ -static int cs4270_i2c_attach(struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, cs4270_i2c_probe); -} - -static int cs4270_i2c_detach(struct i2c_client *client) -{ - struct snd_soc_codec *codec = i2c_get_clientdata(client); - - i2c_detach_client(client); - codec->control_data = NULL; - - kfree(codec->reg_cache); - codec->reg_cache = NULL; - - kfree(client); - return 0; -} +static int cs4270_i2c_probe(struct i2c_client *, const struct i2c_device_id *); /* A list of non-DAPM controls that the CS4270 supports */ static const struct snd_kcontrol_new cs4270_snd_controls[] = { @@ -525,14 +498,19 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = { CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1) }; +static const struct i2c_device_id cs4270_id[] = { + {"cs4270", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, cs4270_id); + static struct i2c_driver cs4270_i2c_driver = { .driver = { .name = "CS4270 I2C", .owner = THIS_MODULE, }, - .id = I2C_DRIVERID_CS4270, - .attach_adapter = cs4270_i2c_attach, - .detach_client = cs4270_i2c_detach, + .id_table = cs4270_id, + .probe = cs4270_i2c_probe, }; /* @@ -561,11 +539,11 @@ static struct snd_soc_device *cs4270_socdev; * Note: snd_soc_new_pcms() must be called before this function can be called, * because of snd_ctl_add(). */ -static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) +static int cs4270_i2c_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = cs4270_socdev; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c_client = NULL; int i; int ret = 0; @@ -578,12 +556,6 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) /* Note: codec_dai->codec is NULL here */ - i2c_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!i2c_client) { - printk(KERN_ERR "cs4270: could not allocate I2C client\n"); - return -ENOMEM; - } - codec->reg_cache = kzalloc(CS4270_NUMREGS, GFP_KERNEL); if (!codec->reg_cache) { printk(KERN_ERR "cs4270: could not allocate register cache\n"); @@ -591,13 +563,6 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) goto error; } - i2c_set_clientdata(i2c_client, codec); - strcpy(i2c_client->name, "CS4270"); - - i2c_client->driver = &cs4270_i2c_driver; - i2c_client->adapter = adapter; - i2c_client->addr = addr; - /* Verify that we have a CS4270 */ ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID); @@ -612,18 +577,10 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) goto error; } - printk(KERN_INFO "cs4270: found device at I2C address %X\n", addr); + printk(KERN_INFO "cs4270: found device at I2C address %X\n", + i2c_client->addr); printk(KERN_INFO "cs4270: hardware revision %X\n", ret & 0xF); - /* Tell the I2C layer a new client has arrived */ - - ret = i2c_attach_client(i2c_client); - if (ret) { - printk(KERN_ERR "cs4270: could not attach codec, " - "I2C address %x, error code %i\n", addr, ret); - goto error; - } - codec->control_data = i2c_client; codec->read = cs4270_read_reg_cache; codec->write = cs4270_i2c_write; @@ -648,6 +605,8 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) goto error; } + i2c_set_clientdata(i2c_client, codec); + return 0; error: -- cgit v1.2.2 From 9778e9a0eafe796c2affcd1fa1fa8a3765e026e6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 27 Sep 2008 20:30:52 +0200 Subject: ALSA: ASoC: Fix another cs4270 error path Conversion to new-style i2c driver missed the error path of the probe function. Fix it. Signed-off-by: Jean Delvare Cc: Timur Tabi Signed-off-by: Takashi Iwai --- sound/soc/codecs/cs4270.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 82d94f00aa45..d68650de39bc 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -610,17 +610,12 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, return 0; error: - if (codec->control_data) { - i2c_detach_client(i2c_client); - codec->control_data = NULL; - } + codec->control_data = NULL; kfree(codec->reg_cache); codec->reg_cache = NULL; codec->reg_cache_size = 0; - kfree(i2c_client); - return ret; } -- cgit v1.2.2 From d0185c0882d76b8126d4a099c7ac82b3b216d103 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 29 Sep 2008 07:42:57 -0700 Subject: Fix NULL pointer dereference in proc_sys_compare The VFS interface for the 'd_compare()' is a bit special (read: 'odd'), because it really just essentially replaces a memcmp(). The filesystem is supposed to just compare the two names with whatever case-independent or other function. And when I say 'is supposed to', I obviously mean that 'procfs does odd things, and actually looks at the dentry that we don't even pass down, rather than just the name'. Which results in problems, because we actually call d_compare before we have even verified that the dentry is still hashed at all. And that causes a problm since the inode that procfs looks at may have been free'd and the d_inode pointer is NULL. procfs just assumes that all dentries are positive, since procfs itself never generates a negative one. But memory pressure will still result in the dentry getting torn down, and as it is removed by RCU, it still remains visible on some lists - and to d_compare. If the filesystem just did a name comparison, we wouldn't care. And we could just fix procfs to know about negative dentries too. But rather than have the low-level filesystems know about internal VFS details, just move the check for a unhashed dentry up a bit, so that we will only call d_compare on dentries that are still active. The actual oops this caused didn't look like a NULL pointer dereference because procfs did a 'container_of(inode, struct proc_inode, vfs_inode)' to get at its internal proc_inode information from the inode pointer, and accessed a field below the inode. So the oops would look something like BUG: unable to handle kernel paging request at fffffffffffffff0 IP: [] proc_sys_compare+0x36/0x50 and was seen on both x86-64 (Alexey Dobriyan and Hugh Dickins) and ppc64 (Hugh Dickins). Reported-by: Alexey Dobriyan Acked-by: Hugh Dickins Cc: Al Viro Reviewed-by: "Eric W. Biederman" Signed-of-by: Linus Torvalds --- fs/dcache.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 80e93956aced..e7a1a99b7464 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1395,6 +1395,10 @@ struct dentry * __d_lookup(struct dentry * parent, struct qstr * name) if (dentry->d_parent != parent) goto next; + /* non-existing due to RCU? */ + if (d_unhashed(dentry)) + goto next; + /* * It is safe to compare names since d_move() cannot * change the qstr (protected by d_lock). @@ -1410,10 +1414,8 @@ struct dentry * __d_lookup(struct dentry * parent, struct qstr * name) goto next; } - if (!d_unhashed(dentry)) { - atomic_inc(&dentry->d_count); - found = dentry; - } + atomic_inc(&dentry->d_count); + found = dentry; spin_unlock(&dentry->d_lock); break; next: -- cgit v1.2.2 From 204c96f609045a8ce84d1dca3e758ee9b0b2a95c Mon Sep 17 00:00:00 2001 From: "zippel@linux-m68k.org" Date: Mon, 29 Sep 2008 05:27:10 +0200 Subject: kconfig: fix silentoldconfig Recent changes to oldconfig have mixed up the silentoldconfig handling, so this fixes that by clearly separating that special mode, e.g. KCONFIG_NOSILENTUPDATE is only relevant here, the .config is written as needed. This will also properly close Bug 11230. Signed-off-by: Roman Zippel Signed-off-by: Linus Torvalds --- scripts/kconfig/conf.c | 123 +++++++++++++++++++++++-------------------------- 1 file changed, 57 insertions(+), 66 deletions(-) diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index 36b5eedcdc75..3e1057f885c6 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -32,6 +32,7 @@ char *defconfig_file; static int indent = 1; static int valid_stdin = 1; +static int sync_kconfig; static int conf_cnt; static char line[128]; static struct menu *rootEntry; @@ -65,7 +66,7 @@ static void strip(char *str) static void check_stdin(void) { - if (!valid_stdin && input_mode == ask_silent) { + if (!valid_stdin) { printf(_("aborted!\n\n")); printf(_("Console input/output is redirected. ")); printf(_("Run 'make oldconfig' to update configuration.\n\n")); @@ -427,43 +428,6 @@ static void check_conf(struct menu *menu) check_conf(child); } -static void conf_do_update(void) -{ - /* Update until a loop caused no more changes */ - do { - conf_cnt = 0; - check_conf(&rootmenu); - } while (conf_cnt); -} - -static int conf_silent_update(void) -{ - const char *name; - - if (conf_get_changed()) { - name = getenv("KCONFIG_NOSILENTUPDATE"); - if (name && *name) { - fprintf(stderr, - _("\n*** Kernel configuration requires explicit update.\n\n")); - return 1; - } - conf_do_update(); - } - return 0; -} - -static int conf_update(void) -{ - rootEntry = &rootmenu; - conf(&rootmenu); - if (input_mode == ask_all) { - input_mode = ask_silent; - valid_stdin = 1; - } - conf_do_update(); - return 0; -} - int main(int ac, char **av) { int opt; @@ -477,11 +441,11 @@ int main(int ac, char **av) while ((opt = getopt(ac, av, "osdD:nmyrh")) != -1) { switch (opt) { case 'o': - input_mode = ask_new; + input_mode = ask_silent; break; case 's': input_mode = ask_silent; - valid_stdin = isatty(0) && isatty(1) && isatty(2); + sync_kconfig = 1; break; case 'd': input_mode = set_default; @@ -519,6 +483,19 @@ int main(int ac, char **av) name = av[optind]; conf_parse(name); //zconfdump(stdout); + if (sync_kconfig) { + if (stat(".config", &tmpstat)) { + fprintf(stderr, _("***\n" + "*** You have not yet configured your kernel!\n" + "*** (missing kernel .config file)\n" + "***\n" + "*** Please run some configurator (e.g. \"make oldconfig\" or\n" + "*** \"make menuconfig\" or \"make xconfig\").\n" + "***\n")); + exit(1); + } + } + switch (input_mode) { case set_default: if (!defconfig_file) @@ -531,16 +508,6 @@ int main(int ac, char **av) } break; case ask_silent: - if (stat(".config", &tmpstat)) { - printf(_("***\n" - "*** You have not yet configured your kernel!\n" - "*** (missing kernel .config file)\n" - "***\n" - "*** Please run some configurator (e.g. \"make oldconfig\" or\n" - "*** \"make menuconfig\" or \"make xconfig\").\n" - "***\n")); - exit(1); - } case ask_all: case ask_new: conf_read(NULL); @@ -569,6 +536,19 @@ int main(int ac, char **av) default: break; } + + if (sync_kconfig) { + if (conf_get_changed()) { + name = getenv("KCONFIG_NOSILENTUPDATE"); + if (name && *name) { + fprintf(stderr, + _("\n*** Kernel configuration requires explicit update.\n\n")); + return 1; + } + } + valid_stdin = isatty(0) && isatty(1) && isatty(2); + } + switch (input_mode) { case set_no: conf_set_all_new_symbols(def_no); @@ -585,27 +565,38 @@ int main(int ac, char **av) case set_default: conf_set_all_new_symbols(def_default); break; - case ask_silent: case ask_new: - if (conf_silent_update()) - exit(1); - break; case ask_all: - if (conf_update()) - exit(1); + rootEntry = &rootmenu; + conf(&rootmenu); + input_mode = ask_silent; + /* fall through */ + case ask_silent: + /* Update until a loop caused no more changes */ + do { + conf_cnt = 0; + check_conf(&rootmenu); + } while (conf_cnt); break; } - if (conf_write(NULL)) { - fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); - exit(1); - } - /* ask_silent is used during the build so we shall update autoconf. - * All other commands are only used to generate a config. - */ - if (input_mode == ask_silent && conf_write_autoconf()) { - fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); - return 1; + if (sync_kconfig) { + /* silentoldconfig is used during the build so we shall update autoconf. + * All other commands are only used to generate a config. + */ + if (conf_get_changed() && conf_write(NULL)) { + fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); + exit(1); + } + if (conf_write_autoconf()) { + fprintf(stderr, _("\n*** Error during update of the kernel configuration.\n\n")); + return 1; + } + } else { + if (conf_write(NULL)) { + fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); + exit(1); + } } return 0; } -- cgit v1.2.2 From 661b0680f736e628a6da1cc030c201646587d658 Mon Sep 17 00:00:00 2001 From: "zippel@linux-m68k.org" Date: Mon, 29 Sep 2008 05:27:11 +0200 Subject: kconfig: readd lost change count Commit f072181e6403b0fe2e2aa800a005497b748fd284 ("kconfig: drop the ""trying to assign nonexistent symbol" warning") simply dropped the warnings, but it does a little more than that, it also marks the current .config as needed saving, so add this back. Signed-off-by: Roman Zippel Signed-off-by: Linus Torvalds --- scripts/kconfig/confdata.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index df6a188b9930..b91cf241a539 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -222,8 +222,10 @@ load: continue; if (def == S_DEF_USER) { sym = sym_find(line + 9); - if (!sym) + if (!sym) { + sym_add_change_count(1); break; + } } else { sym = sym_lookup(line + 9, 0); if (sym->type == S_UNKNOWN) @@ -259,8 +261,10 @@ load: } if (def == S_DEF_USER) { sym = sym_find(line + 7); - if (!sym) + if (!sym) { + sym_add_change_count(1); break; + } } else { sym = sym_lookup(line + 7, 0); if (sym->type == S_UNKNOWN) -- cgit v1.2.2 From 7659e349672bb0d378ef8d7d62bae4c53d2bdd18 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 29 Sep 2008 14:06:45 +0200 Subject: hrtimer: migrate pending list on cpu offline Impact: hrtimers which are on the pending list are not migrated at cpu offline and can be stale forever Add the pending list migration when CONFIG_HIGH_RES_TIMERS is enabled Signed-off-by: Thomas Gleixner --- kernel/hrtimer.c | 34 +++++++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index b8e4dce80a74..580bc66ae136 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1610,10 +1610,36 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, } } +#ifdef CONFIG_HIGH_RES_TIMERS +static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base, + struct hrtimer_cpu_base *new_base) +{ + struct hrtimer *timer; + int raise = 0; + + while (!list_empty(&old_base->cb_pending)) { + timer = list_entry(old_base->cb_pending.next, + struct hrtimer, cb_entry); + + __remove_hrtimer(timer, timer->base, HRTIMER_STATE_PENDING, 0); + timer->base = &new_base->clock_base[timer->base->index]; + list_add_tail(&timer->cb_entry, &new_base->cb_pending); + raise = 1; + } + return raise; +} +#else +static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base, + struct hrtimer_cpu_base *new_base) +{ + return 0; +} +#endif + static void migrate_hrtimers(int cpu) { struct hrtimer_cpu_base *old_base, *new_base; - int i; + int i, raise = 0; BUG_ON(cpu_online(cpu)); old_base = &per_cpu(hrtimer_bases, cpu); @@ -1630,10 +1656,16 @@ static void migrate_hrtimers(int cpu) &new_base->clock_base[i]); } + if (migrate_hrtimer_pending(old_base, new_base)) + raise = 1; + spin_unlock(&old_base->lock); spin_unlock(&new_base->lock); local_irq_enable(); put_cpu_var(hrtimer_bases); + + if (raise) + hrtimer_raise_softirq(); } #endif /* CONFIG_HOTPLUG_CPU */ -- cgit v1.2.2 From 41e1022eae71707f1ce6801a746f70b1e57b7567 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 29 Sep 2008 14:09:39 +0200 Subject: hrtimer: fix migration of CB_IRQSAFE_NO_SOFTIRQ hrtimers Impact: Stale timers after a CPU went offline. commit 37bb6cb4097e29ffee970065b74499cbf10603a3 hrtimer: unlock hrtimer_wakeup changed the hrtimer sleeper callback mode to CB_IRQSAFE_NO_SOFTIRQ due to locking problems. A result of this change is that when enqueue is called for an already expired hrtimer the callback function is not longer called directly from the enqueue code. The normal callers have been fixed in the code, but the migration code which moves hrtimers from a dead CPU to a live CPU was not made aware of this. This can be fixed by checking the timer state after the call to enqueue in the migration code. Signed-off-by: Thomas Gleixner --- kernel/hrtimer.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 580bc66ae136..ac2f6d6d4868 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1591,11 +1591,12 @@ static void __cpuinit init_hrtimers_cpu(int cpu) #ifdef CONFIG_HOTPLUG_CPU -static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, +static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, struct hrtimer_clock_base *new_base) { struct hrtimer *timer; struct rb_node *node; + int raise = 0; while ((node = rb_first(&old_base->active))) { timer = rb_entry(node, struct hrtimer, node); @@ -1607,7 +1608,27 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, * Enqueue the timer. Allow reprogramming of the event device */ enqueue_hrtimer(timer, new_base, 1); + +#ifdef CONFIG_HIGH_RES_TIMERS + /* + * Happens with high res enabled when the timer was + * already expired and the callback mode is + * HRTIMER_CB_IRQSAFE_NO_SOFTIRQ + * (hrtimer_sleeper). The enqueue code does not move + * them to the soft irq pending list for + * performance/latency reasons, but in the migration + * state, we need to do that otherwise we end up with + * a stale timer. + */ + if (timer->state == HRTIMER_STATE_INACTIVE) { + timer->state = HRTIMER_STATE_PENDING; + list_add_tail(&timer->cb_entry, + &new_base->cpu_base->cb_pending); + raise = 1; + } +#endif } + return raise; } #ifdef CONFIG_HIGH_RES_TIMERS @@ -1652,8 +1673,9 @@ static void migrate_hrtimers(int cpu) spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING); for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { - migrate_hrtimer_list(&old_base->clock_base[i], - &new_base->clock_base[i]); + if (migrate_hrtimer_list(&old_base->clock_base[i], + &new_base->clock_base[i])) + raise = 1; } if (migrate_hrtimer_pending(old_base, new_base)) -- cgit v1.2.2 From b00c1a99e7758f794923c61e5cd55268d61c9469 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 29 Sep 2008 15:44:46 +0200 Subject: hrtimer: mark migration state Impact: during migration active hrtimers can be seen as inactive The migration code removes the hrtimers from the queues of the dead CPU and sets the state temporary to INACTIVE. The enqueue code sets it to ACTIVE/PENDING again. Prevent that the wrong state can be seen by using a separate migration state bit. Signed-off-by: Thomas Gleixner --- include/linux/hrtimer.h | 4 +++- kernel/hrtimer.c | 12 ++++++++++-- 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 6d93dce61cbb..bdd88df1b4e5 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -67,9 +67,10 @@ enum hrtimer_cb_mode { * 0x02 callback function running * 0x04 callback pending (high resolution mode) * - * Special case: + * Special cases: * 0x03 callback function running and enqueued * (was requeued on another CPU) + * 0x09 timer was migrated on CPU hotunplug * The "callback function running and enqueued" status is only possible on * SMP. It happens for example when a posix timer expired and the callback * queued a signal. Between dropping the lock which protects the posix timer @@ -87,6 +88,7 @@ enum hrtimer_cb_mode { #define HRTIMER_STATE_ENQUEUED 0x01 #define HRTIMER_STATE_CALLBACK 0x02 #define HRTIMER_STATE_PENDING 0x04 +#define HRTIMER_STATE_MIGRATE 0x08 /** * struct hrtimer - the basic hrtimer structure diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index ac2f6d6d4868..ace723dd1e52 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1602,7 +1602,13 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, timer = rb_entry(node, struct hrtimer, node); BUG_ON(hrtimer_callback_running(timer)); debug_hrtimer_deactivate(timer); - __remove_hrtimer(timer, old_base, HRTIMER_STATE_INACTIVE, 0); + + /* + * Mark it as STATE_MIGRATE not INACTIVE otherwise the + * timer could be seen as !active and just vanish away + * under us on another CPU + */ + __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0); timer->base = new_base; /* * Enqueue the timer. Allow reprogramming of the event device @@ -1620,13 +1626,15 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, * state, we need to do that otherwise we end up with * a stale timer. */ - if (timer->state == HRTIMER_STATE_INACTIVE) { + if (timer->state == HRTIMER_STATE_MIGRATE) { timer->state = HRTIMER_STATE_PENDING; list_add_tail(&timer->cb_entry, &new_base->cpu_base->cb_pending); raise = 1; } #endif + /* Clear the migration state bit */ + timer->state &= ~HRTIMER_STATE_MIGRATE; } return raise; } -- cgit v1.2.2 From ccc7dadf736639da86f3e0c86832c11a66fc8221 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 29 Sep 2008 15:47:42 +0200 Subject: hrtimer: prevent migration of per CPU hrtimers Impact: per CPU hrtimers can be migrated from a dead CPU The hrtimer code has no knowledge about per CPU timers, but we need to prevent the migration of such timers and warn when such a timer is active at migration time. Explicitely mark the timers as per CPU and use a more understandable mode descriptor for the interrupts safe unlocked callback mode, which is used by hrtimer_sleeper and the scheduler code. Signed-off-by: Thomas Gleixner --- include/linux/hrtimer.h | 14 +++++++++++--- kernel/hrtimer.c | 37 +++++++++++++++++++++++++------------ kernel/sched.c | 4 ++-- kernel/time/tick-sched.c | 2 +- kernel/trace/trace_sysprof.c | 2 +- 5 files changed, 40 insertions(+), 19 deletions(-) diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index bdd88df1b4e5..2f245fe63bda 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -47,14 +47,22 @@ enum hrtimer_restart { * HRTIMER_CB_IRQSAFE: Callback may run in hardirq context * HRTIMER_CB_IRQSAFE_NO_RESTART: Callback may run in hardirq context and * does not restart the timer - * HRTIMER_CB_IRQSAFE_NO_SOFTIRQ: Callback must run in hardirq context - * Special mode for tick emultation + * HRTIMER_CB_IRQSAFE_PERCPU: Callback must run in hardirq context + * Special mode for tick emulation and + * scheduler timer. Such timers are per + * cpu and not allowed to be migrated on + * cpu unplug. + * HRTIMER_CB_IRQSAFE_UNLOCKED: Callback should run in hardirq context + * with timer->base lock unlocked + * used for timers which call wakeup to + * avoid lock order problems with rq->lock */ enum hrtimer_cb_mode { HRTIMER_CB_SOFTIRQ, HRTIMER_CB_IRQSAFE, HRTIMER_CB_IRQSAFE_NO_RESTART, - HRTIMER_CB_IRQSAFE_NO_SOFTIRQ, + HRTIMER_CB_IRQSAFE_PERCPU, + HRTIMER_CB_IRQSAFE_UNLOCKED, }; /* diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index ace723dd1e52..cdec83e722fa 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -672,13 +672,14 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, */ BUG_ON(timer->function(timer) != HRTIMER_NORESTART); return 1; - case HRTIMER_CB_IRQSAFE_NO_SOFTIRQ: + case HRTIMER_CB_IRQSAFE_PERCPU: + case HRTIMER_CB_IRQSAFE_UNLOCKED: /* * This is solely for the sched tick emulation with * dynamic tick support to ensure that we do not * restart the tick right on the edge and end up with * the tick timer in the softirq ! The calling site - * takes care of this. + * takes care of this. Also used for hrtimer sleeper ! */ debug_hrtimer_deactivate(timer); return 1; @@ -1245,7 +1246,8 @@ static void __run_hrtimer(struct hrtimer *timer) timer_stats_account_hrtimer(timer); fn = timer->function; - if (timer->cb_mode == HRTIMER_CB_IRQSAFE_NO_SOFTIRQ) { + if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU || + timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) { /* * Used for scheduler timers, avoid lock inversion with * rq->lock and tasklist_lock. @@ -1452,7 +1454,7 @@ void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task) sl->timer.function = hrtimer_wakeup; sl->task = task; #ifdef CONFIG_HIGH_RES_TIMERS - sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ; + sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED; #endif } @@ -1592,7 +1594,7 @@ static void __cpuinit init_hrtimers_cpu(int cpu) #ifdef CONFIG_HOTPLUG_CPU static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, - struct hrtimer_clock_base *new_base) + struct hrtimer_clock_base *new_base, int dcpu) { struct hrtimer *timer; struct rb_node *node; @@ -1603,6 +1605,18 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, BUG_ON(hrtimer_callback_running(timer)); debug_hrtimer_deactivate(timer); + /* + * Should not happen. Per CPU timers should be + * canceled _before_ the migration code is called + */ + if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU) { + __remove_hrtimer(timer, old_base, + HRTIMER_STATE_INACTIVE, 0); + WARN(1, "hrtimer (%p %p)active but cpu %d dead\n", + timer, timer->function, dcpu); + continue; + } + /* * Mark it as STATE_MIGRATE not INACTIVE otherwise the * timer could be seen as !active and just vanish away @@ -1619,12 +1633,11 @@ static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base, /* * Happens with high res enabled when the timer was * already expired and the callback mode is - * HRTIMER_CB_IRQSAFE_NO_SOFTIRQ - * (hrtimer_sleeper). The enqueue code does not move - * them to the soft irq pending list for - * performance/latency reasons, but in the migration - * state, we need to do that otherwise we end up with - * a stale timer. + * HRTIMER_CB_IRQSAFE_UNLOCKED (hrtimer_sleeper). The + * enqueue code does not move them to the soft irq + * pending list for performance/latency reasons, but + * in the migration state, we need to do that + * otherwise we end up with a stale timer. */ if (timer->state == HRTIMER_STATE_MIGRATE) { timer->state = HRTIMER_STATE_PENDING; @@ -1682,7 +1695,7 @@ static void migrate_hrtimers(int cpu) for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { if (migrate_hrtimer_list(&old_base->clock_base[i], - &new_base->clock_base[i])) + &new_base->clock_base[i], cpu)) raise = 1; } diff --git a/kernel/sched.c b/kernel/sched.c index 13dd2db9fb2d..ad1962dc0aa2 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -201,7 +201,7 @@ void init_rt_bandwidth(struct rt_bandwidth *rt_b, u64 period, u64 runtime) hrtimer_init(&rt_b->rt_period_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); rt_b->rt_period_timer.function = sched_rt_period_timer; - rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ; + rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED; } static void start_rt_bandwidth(struct rt_bandwidth *rt_b) @@ -1119,7 +1119,7 @@ static void init_rq_hrtick(struct rq *rq) hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); rq->hrtick_timer.function = hrtick; - rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ; + rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; } #else static inline void hrtick_clear(struct rq *rq) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 39019b3f7621..cb02324bdb88 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -625,7 +625,7 @@ void tick_setup_sched_timer(void) */ hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); ts->sched_timer.function = tick_sched_timer; - ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ; + ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; /* Get the next period (per cpu) */ ts->sched_timer.expires = tick_init_jiffy_update(); diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index bb948e52ce20..db58fb66a135 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -202,7 +202,7 @@ static void start_stack_timer(int cpu) hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); hrtimer->function = stack_trace_timer_fn; - hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ; + hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_PERCPU; hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL); } -- cgit v1.2.2 From 31a78f23bac0069004e69f98808b6988baccb6b6 Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Sun, 28 Sep 2008 23:09:31 +0100 Subject: mm owner: fix race between swapoff and exit There's a race between mm->owner assignment and swapoff, more easily seen when task slab poisoning is turned on. The condition occurs when try_to_unuse() runs in parallel with an exiting task. A similar race can occur with callers of get_task_mm(), such as /proc// or ptrace or page migration. CPU0 CPU1 try_to_unuse looks at mm = task0->mm increments mm->mm_users task 0 exits mm->owner needs to be updated, but no new owner is found (mm_users > 1, but no other task has task->mm = task0->mm) mm_update_next_owner() leaves mmput(mm) decrements mm->mm_users task0 freed dereferencing mm->owner fails The fix is to notify the subsystem via mm_owner_changed callback(), if no new owner is found, by specifying the new task as NULL. Jiri Slaby: mm->owner was set to NULL prior to calling cgroup_mm_owner_callbacks(), but must be set after that, so as not to pass NULL as old owner causing oops. Daisuke Nishimura: mm_update_next_owner() may set mm->owner to NULL, but mem_cgroup_from_task() and its callers need to take account of this situation to avoid oops. Hugh Dickins: Lockdep warning and hang below exec_mmap() when testing these patches. exit_mm() up_reads mmap_sem before calling mm_update_next_owner(), so exec_mmap() now needs to do the same. And with that repositioning, there's now no point in mm_need_new_owner() allowing for NULL mm. Reported-by: Hugh Dickins Signed-off-by: Balbir Singh Signed-off-by: Jiri Slaby Signed-off-by: Daisuke Nishimura Signed-off-by: Hugh Dickins Cc: KAMEZAWA Hiroyuki Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/exec.c | 2 +- kernel/cgroup.c | 5 +++-- kernel/exit.c | 12 ++++++++++-- mm/memcontrol.c | 17 +++++++++++++++++ 4 files changed, 31 insertions(+), 5 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 32993beecbe9..cecee501ce78 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -752,11 +752,11 @@ static int exec_mmap(struct mm_struct *mm) tsk->active_mm = mm; activate_mm(active_mm, mm); task_unlock(tsk); - mm_update_next_owner(old_mm); arch_pick_mmap_layout(mm); if (old_mm) { up_read(&old_mm->mmap_sem); BUG_ON(active_mm != old_mm); + mm_update_next_owner(old_mm); mmput(old_mm); return 0; } diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 13932abde159..a0123d75ec9a 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2738,14 +2738,15 @@ void cgroup_fork_callbacks(struct task_struct *child) */ void cgroup_mm_owner_callbacks(struct task_struct *old, struct task_struct *new) { - struct cgroup *oldcgrp, *newcgrp; + struct cgroup *oldcgrp, *newcgrp = NULL; if (need_mm_owner_callback) { int i; for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) { struct cgroup_subsys *ss = subsys[i]; oldcgrp = task_cgroup(old, ss->subsys_id); - newcgrp = task_cgroup(new, ss->subsys_id); + if (new) + newcgrp = task_cgroup(new, ss->subsys_id); if (oldcgrp == newcgrp) continue; if (ss->mm_owner_changed) diff --git a/kernel/exit.c b/kernel/exit.c index 16395644a98f..85a83c831856 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -583,8 +583,6 @@ mm_need_new_owner(struct mm_struct *mm, struct task_struct *p) * If there are other users of the mm and the owner (us) is exiting * we need to find a new owner to take on the responsibility. */ - if (!mm) - return 0; if (atomic_read(&mm->mm_users) <= 1) return 0; if (mm->owner != p) @@ -627,6 +625,16 @@ retry: } while_each_thread(g, c); read_unlock(&tasklist_lock); + /* + * We found no owner yet mm_users > 1: this implies that we are + * most likely racing with swapoff (try_to_unuse()) or /proc or + * ptrace or page migration (get_task_mm()). Mark owner as NULL, + * so that subsystems can understand the callback and take action. + */ + down_write(&mm->mmap_sem); + cgroup_mm_owner_callbacks(mm->owner, NULL); + mm->owner = NULL; + up_write(&mm->mmap_sem); return; assign_new_owner: diff --git a/mm/memcontrol.c b/mm/memcontrol.c index c0500e4d3a2f..36896f3eb7f5 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -250,6 +250,14 @@ static struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont) struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p) { + /* + * mm_update_next_owner() may clear mm->owner to NULL + * if it races with swapoff, page migration, etc. + * So this can be called with p == NULL. + */ + if (unlikely(!p)) + return NULL; + return container_of(task_subsys_state(p, mem_cgroup_subsys_id), struct mem_cgroup, css); } @@ -549,6 +557,11 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm, if (likely(!memcg)) { rcu_read_lock(); mem = mem_cgroup_from_task(rcu_dereference(mm->owner)); + if (unlikely(!mem)) { + rcu_read_unlock(); + kmem_cache_free(page_cgroup_cache, pc); + return 0; + } /* * For every charge from the cgroup, increment reference count */ @@ -801,6 +814,10 @@ int mem_cgroup_shrink_usage(struct mm_struct *mm, gfp_t gfp_mask) rcu_read_lock(); mem = mem_cgroup_from_task(rcu_dereference(mm->owner)); + if (unlikely(!mem)) { + rcu_read_unlock(); + return 0; + } css_get(&mem->css); rcu_read_unlock(); -- cgit v1.2.2 From 94aca1dac6f6d21f4b07e4864baf7768cabcc6e7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 29 Sep 2008 15:24:02 -0700 Subject: Linux 2.6.27-rc8 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index cab896a97296..1d03c1644ddb 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 27 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v1.2.2 From c459ce8b5a7d933a3bcf6915ab17ac1e036e2ac4 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 29 Sep 2008 16:39:19 -0700 Subject: [IA64] Put the space for cpu0 per-cpu area into .data section Initial fix for making sure that we can access percpu variables in all C code (commit: 10617bbe84628eb18ab5f723d3ba35005adde143) inadvertantly allocated the memory in the "percpu" section of the vmlinux ELF executable. This confused kexec/dump. Signed-off-by: Tony Luck --- arch/ia64/include/asm/sections.h | 3 +++ arch/ia64/kernel/head.S | 9 +++++---- arch/ia64/kernel/vmlinux.lds.S | 8 +++++--- arch/ia64/mm/contig.c | 2 +- arch/ia64/mm/discontig.c | 2 +- 5 files changed, 15 insertions(+), 9 deletions(-) diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h index f66799891036..1a873b36a4a1 100644 --- a/arch/ia64/include/asm/sections.h +++ b/arch/ia64/include/asm/sections.h @@ -11,6 +11,9 @@ #include extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[]; +#ifdef CONFIG_SMP +extern char __cpu0_per_cpu[]; +#endif extern char __start___vtop_patchlist[], __end___vtop_patchlist[]; extern char __start___rse_patchlist[], __end___rse_patchlist[]; extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[]; diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index 8bdea8eb62e3..66e491d8baac 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -367,16 +367,17 @@ start_ap: ;; #else (isAP) br.few 2f - mov r20=r19 - sub r19=r19,r18 + movl r20=__cpu0_per_cpu ;; shr.u r18=r18,3 1: - ld8 r21=[r20],8;; - st8[r19]=r21,8 + ld8 r21=[r19],8;; + st8[r20]=r21,8 adds r18=-1,r18;; cmp4.lt p7,p6=0,r18 (p7) br.cond.dptk.few 1b + mov r19=r20 + ;; 2: #endif tpa r19=r19 diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index de71da811cd6..10a7d47e8510 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -215,9 +215,6 @@ SECTIONS /* Per-cpu data: */ percpu : { } :percpu . = ALIGN(PERCPU_PAGE_SIZE); -#ifdef CONFIG_SMP - . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */ -#endif __phys_per_cpu_start = .; .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET) { @@ -233,6 +230,11 @@ SECTIONS data : { } :data .data : AT(ADDR(.data) - LOAD_OFFSET) { +#ifdef CONFIG_SMP + . = ALIGN(PERCPU_PAGE_SIZE); + __cpu0_per_cpu = .; + . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */ +#endif DATA_DATA *(.data1) *(.gnu.linkonce.d*) diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index e566ff43884a..0ee085efbe29 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -163,7 +163,7 @@ per_cpu_init (void) * get_zeroed_page(). */ if (first_time) { - void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE; + void *cpu0_data = __cpu0_per_cpu; first_time=0; diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 78026aabaa7f..d8c5fcd89e5b 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -144,7 +144,7 @@ static void *per_cpu_node_setup(void *cpu_data, int node) for_each_possible_early_cpu(cpu) { if (cpu == 0) { - void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE; + void *cpu0_data = __cpu0_per_cpu; __per_cpu_offset[cpu] = (char*)cpu0_data - __per_cpu_start; } else if (node == node_cpuid[cpu].nid) { -- cgit v1.2.2 From ad611045ce5d059af84a9855b22ca3f7a99d47be Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 24 Sep 2008 16:39:04 +0000 Subject: powerpc: Fix PCI in Holly device tree The PCI bridge on the Holly board is incorrectly represented in the device tree. The current device tree node for the PCI bridge sits under the tsi-bridge node. That's not obviously wrong, but the PCI bridge translates some PCI spaces into CPU address ranges which were not translated by the "ranges" property in tsi-bridge node. We used to get away with this problem because the PCI bridge discovery code was also buggy, assuming incorrectly that PCI host bridge nodes were always directly under the root bus and treating the translated addresses as raw CPU addresses, rather than parent bus addresses. This has since been fixed, thus breaking Holly. This could be fixed by adding extra translations to the tsi-bridge node, but this patch instead moves the Holly PCI bridge out of the tsi-bridge node to the root bus. This makes the tsi-bridge node represent only the built-in IO devices in the bridge, with a more-or-less contiguous address range. This is the same convention used on Freescale SoC chips, where the "soc" node represents only the IMMR region, and the PCI and other bus bridges are separate nodes under the root bus. Signed-off-by: David Gibson Acked-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/dts/holly.dts | 106 ++++++++++++++++++++-------------------- 1 file changed, 53 insertions(+), 53 deletions(-) diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index f87fe7b9ced9..c6e11ebecebb 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -133,61 +133,61 @@ reg = <0x00007400 0x00000400>; big-endian; }; + }; - pci@1000 { - device_type = "pci"; - compatible = "tsi109-pci", "tsi108-pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0x00001000 0x00001000>; - bus-range = <0x0 0x0>; - /*----------------------------------------------------+ - | PCI memory range. - | 01 denotes I/O space - | 02 denotes 32-bit memory space - +----------------------------------------------------*/ - ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000 - 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>; - clock-frequency = <133333332>; - interrupt-parent = <&MPIC>; + pci@c0001000 { + device_type = "pci"; + compatible = "tsi109-pci", "tsi108-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xc0001000 0x00001000>; + bus-range = <0x0 0x0>; + /*----------------------------------------------------+ + | PCI memory range. + | 01 denotes I/O space + | 02 denotes 32-bit memory space + +----------------------------------------------------*/ + ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000 + 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>; + clock-frequency = <133333332>; + interrupt-parent = <&MPIC>; + interrupts = <0x17 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + /*----------------------------------------------------+ + | The INTA, INTB, INTC, INTD are shared. + +----------------------------------------------------*/ + interrupt-map = < + 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 + 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 + 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 + 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 + + 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 + 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 + 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 + 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 + + 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 + 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 + 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 + 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 + + 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 + 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 + 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 + 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 + >; + + RT0: router@1180 { + device_type = "pic-router"; + interrupt-controller; + big-endian; + clock-frequency = <0>; + #address-cells = <0>; + #interrupt-cells = <2>; interrupts = <0x17 0x2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - /*----------------------------------------------------+ - | The INTA, INTB, INTC, INTD are shared. - +----------------------------------------------------*/ - interrupt-map = < - 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 - 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 - 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 - 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 - - 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 - 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 - 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 - 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 - - 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 - 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 - 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 - 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 - - 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 - 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 - 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 - 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 - >; - - RT0: router@1180 { - device_type = "pic-router"; - interrupt-controller; - big-endian; - clock-frequency = <0>; - #address-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x17 0x2>; - interrupt-parent = <&MPIC>; - }; + interrupt-parent = <&MPIC>; }; }; -- cgit v1.2.2 From 61e9916eba35dfb76d38013a5aae9a59cc50877a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 24 Sep 2008 22:56:25 +0000 Subject: powerpc: Fix failure to shutdown with CPU hotplug I tracked down the shutdown regression to CPUs not dying when being shut down during power-off. This turns out to be due to the system_state being SYSTEM_POWER_OFF, which this code doesn't take as a valid state for shutting off CPUs in. This has never made sense to me, but when I added hotplug code to implement hibernate I only "made it work" and did not question the need to check the system_state. Thomas Gleixner helped me dig, but the only thing we found is that it was added with the original commit that added CPU hotplug support. Signed-off-by: Johannes Berg Acked-by: Joel Schopp Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/idle.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index d308a9f70f1b..31982d05d81a 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -34,11 +34,7 @@ #include #ifdef CONFIG_HOTPLUG_CPU -/* this is used for software suspend, and that shuts down - * CPUs even while the system is still booting... */ -#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \ - (system_state == SYSTEM_RUNNING \ - || system_state == SYSTEM_BOOTING)) +#define cpu_should_die() cpu_is_offline(smp_processor_id()) #else #define cpu_should_die() 0 #endif -- cgit v1.2.2 From 2eedd6047b050f82f4e596a50704686ec989c1c8 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 25 Sep 2008 00:39:05 +0200 Subject: mfd: Fix Kconfig accroding to the new gpiolib symbols HAVE_GPIO_LIB has basically been replaced by GPIOLIB Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 10c44d3fe01a..68dc8d9eb24e 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -21,7 +21,7 @@ config MFD_SM501 config MFD_SM501_GPIO bool "Export GPIO via GPIO layer" - depends on MFD_SM501 && HAVE_GPIO_LIB + depends on MFD_SM501 && GPIOLIB ---help--- This option uses the gpio library layer to export the 64 GPIO lines on the SM501. The platform data is used to supply the @@ -29,7 +29,7 @@ config MFD_SM501_GPIO config MFD_ASIC3 bool "Support for Compaq ASIC3" - depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM + depends on GENERIC_HARDIRQS && GPIOLIB && ARM ---help--- This driver supports the ASIC3 multifunction chip found on many PDAs (mainly iPAQ and HTC based ones) -- cgit v1.2.2 From 6cac6e8489af6c419cb6af6911535a280e6b6c2e Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 25 Sep 2008 00:43:59 +0200 Subject: mfd: Fix asic3 compilation map_size was declared from the wrong place. Signed-off-by: Samuel Ortiz --- drivers/mfd/asic3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index bc2a807f210d..ba5aa2008273 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -312,7 +312,6 @@ static int __init asic3_irq_probe(struct platform_device *pdev) struct asic3 *asic = platform_get_drvdata(pdev); unsigned long clksel = 0; unsigned int irq, irq_base; - int map_size; int ret; ret = platform_get_irq(pdev, 0); @@ -534,6 +533,7 @@ static int __init asic3_probe(struct platform_device *pdev) struct asic3 *asic; struct resource *mem; unsigned long clksel; + int map_size; int ret = 0; asic = kzalloc(sizeof(struct asic3), GFP_KERNEL); -- cgit v1.2.2 From 3dcd7e269d2223126f6ee9bc893f5a6166e1770d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=2EA=2E=20Magall=C3=B3n?= Date: Tue, 30 Sep 2008 10:02:52 +0200 Subject: x86: fix typo in enable_mtrr_cleanup early parameter Correct typo for 'enable_mtrr_cleanup' early boot param name. Signed-off-by: J.A. Magallon Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index b117d7f8a564..885c8265e6b5 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -834,7 +834,7 @@ static int __init enable_mtrr_cleanup_setup(char *str) enable_mtrr_cleanup = 1; return 0; } -early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); +early_param("enable_mtrr_cleanup", enable_mtrr_cleanup_setup); struct var_mtrr_state { unsigned long range_startk; -- cgit v1.2.2 From d01dbeb6af7a0848063033f73c3d146fec7451f3 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 30 Sep 2008 02:03:19 -0700 Subject: ipsec: Fix pskb_expand_head corruption in xfrm_state_check_space We're never supposed to shrink the headroom or tailroom. In fact, shrinking the headroom is a fatal action. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/xfrm/xfrm_output.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c index ac25b4c0e982..dc50f1e71f76 100644 --- a/net/xfrm/xfrm_output.c +++ b/net/xfrm/xfrm_output.c @@ -27,10 +27,14 @@ static int xfrm_state_check_space(struct xfrm_state *x, struct sk_buff *skb) - skb_headroom(skb); int ntail = dst->dev->needed_tailroom - skb_tailroom(skb); - if (nhead > 0 || ntail > 0) - return pskb_expand_head(skb, nhead, ntail, GFP_ATOMIC); - - return 0; + if (nhead <= 0) { + if (ntail <= 0) + return 0; + nhead = 0; + } else if (ntail < 0) + ntail = 0; + + return pskb_expand_head(skb, nhead, ntail, GFP_ATOMIC); } static int xfrm_output_one(struct sk_buff *skb, int err) -- cgit v1.2.2 From 8b122efd13a227d35d5ca242561770db1b5e3658 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 30 Sep 2008 03:03:35 -0700 Subject: iucv: Fix mismerge again. fb65a7c091529bfffb1262515252c0d0f6241c5c ("iucv: Fix bad merging.") fixed a merge error, but in a wrong way. We now end up with the bug below. This patch corrects the mismerge like it was intended. BUG: scheduling while atomic: swapper/1/0x00000000 Modules linked in: CPU: 1 Not tainted 2.6.27-rc7-00094-gc0f4d6d #9 Process swapper (pid: 1, task: 000000003fe7d988, ksp: 000000003fe838c0) 0000000000000000 000000003fe839b8 0000000000000002 0000000000000000 000000003fe83a58 000000003fe839d0 000000003fe839d0 0000000000390de6 000000000058acd8 00000000000000d0 000000003fe7dcd8 0000000000000000 000000000000000c 000000000000000d 0000000000000000 000000003fe83a28 000000000039c5b8 0000000000015e5e 000000003fe839b8 000000003fe83a00 Call Trace: ([<0000000000015d6a>] show_trace+0xe6/0x134) [<0000000000039656>] __schedule_bug+0xa2/0xa8 [<0000000000391744>] schedule+0x49c/0x910 [<0000000000391f64>] schedule_timeout+0xc4/0x114 [<00000000003910d4>] wait_for_common+0xe8/0x1b4 [<00000000000549ae>] call_usermodehelper_exec+0xa6/0xec [<00000000001af7b8>] kobject_uevent_env+0x418/0x438 [<00000000001d08fc>] bus_add_driver+0x1e4/0x298 [<00000000001d1ee4>] driver_register+0x90/0x18c [<0000000000566848>] netiucv_init+0x168/0x2c8 [<00000000000120be>] do_one_initcall+0x3e/0x17c [<000000000054a31a>] kernel_init+0x1ce/0x248 [<000000000001a97a>] kernel_thread_starter+0x6/0xc [<000000000001a974>] kernel_thread_starter+0x0/0xc iucv: NETIUCV driver initialized initcall netiucv_init+0x0/0x2c8 returned with preemption imbalance Signed-off-by: Heiko Carstens Signed-off-by: David S. Miller --- net/iucv/iucv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c index 705959b31e24..d7b54b5bfa69 100644 --- a/net/iucv/iucv.c +++ b/net/iucv/iucv.c @@ -524,7 +524,6 @@ static int iucv_enable(void) get_online_cpus(); for_each_online_cpu(cpu) smp_call_function_single(cpu, iucv_declare_cpu, NULL, 1); - preempt_enable(); if (cpus_empty(iucv_buffer_cpumask)) /* No cpu could declare an iucv buffer. */ goto out_path; @@ -547,7 +546,9 @@ out: */ static void iucv_disable(void) { + get_online_cpus(); on_each_cpu(iucv_retrieve_cpu, NULL, 1); + put_online_cpus(); kfree(iucv_path_table); } -- cgit v1.2.2 From e3145dfb7b4262fa55907006b75da799de8c1be3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 30 Sep 2008 11:40:37 +0200 Subject: ALSA: ASoC: Fix cs4270 error path The error path in cs4270_probe/cs4270_remove is pretty broken: * If cs4270_probe fails, codec is leaked. * If snd_soc_register_card fails, cs4270_i2c_driver stays registered. * If I2C support is enabled but no I2C device is found, i2c_del_driver is never called (neither in cs4270_probe nor in cs4270_remove. Fix all 3 problems by implementing a clean error path in cs4270_probe and jumping to its labels as needed. Signed-off-by: Jean Delvare Acked-by: Timur Tabi Signed-off-by: Takashi Iwai --- sound/soc/codecs/cs4270.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index d68650de39bc..0bbd94501d7e 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -681,7 +681,7 @@ static int cs4270_probe(struct platform_device *pdev) ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { printk(KERN_ERR "cs4270: failed to create PCMs\n"); - return ret; + goto error_free_codec; } #ifdef USE_I2C @@ -690,8 +690,7 @@ static int cs4270_probe(struct platform_device *pdev) ret = i2c_add_driver(&cs4270_i2c_driver); if (ret) { printk(KERN_ERR "cs4270: failed to attach driver"); - snd_soc_free_pcms(socdev); - return ret; + goto error_free_pcms; } /* Did we find a CS4270 on the I2C bus? */ @@ -713,10 +712,23 @@ static int cs4270_probe(struct platform_device *pdev) ret = snd_soc_register_card(socdev); if (ret < 0) { printk(KERN_ERR "cs4270: failed to register card\n"); - snd_soc_free_pcms(socdev); - return ret; + goto error_del_driver; } + return 0; + +error_del_driver: +#ifdef USE_I2C + i2c_del_driver(&cs4270_i2c_driver); + +error_free_pcms: +#endif + snd_soc_free_pcms(socdev); + +error_free_codec: + kfree(socdev->codec); + socdev->codec = NULL; + return ret; } @@ -727,8 +739,7 @@ static int cs4270_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); #ifdef USE_I2C - if (socdev->codec->control_data) - i2c_del_driver(&cs4270_i2c_driver); + i2c_del_driver(&cs4270_i2c_driver); #endif kfree(socdev->codec); -- cgit v1.2.2 From 24918b61b55c21e09a3e07cd82e1b3a8154782dc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 30 Sep 2008 12:58:54 +0200 Subject: ALSA: hda - Fix model for Dell Inspiron 1525 Dell Inspiron 1525 seems to have a buggy BIOS setup and screws up the recent codec parser, as reported by Oleksandr Natalenko: http://lkml.org/lkml/2008/9/12/203 This patch adds the working model, dell-3stack, statically. Signed-off-by: Takashi Iwai Cc: --- sound/pci/hda/patch_sigmatel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index ad994fcab725..f3da621f25c5 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1683,8 +1683,8 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = { /* Dell 3 stack systems with verb table in BIOS */ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f3, "Dell Inspiron 1420", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0227, "Dell Vostro 1400 ", STAC_DELL_BIOS), - SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell ", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022e, "Dell ", STAC_DELL_BIOS), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell Inspiron 1525", STAC_DELL_3ST), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0242, "Dell ", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0243, "Dell ", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ff, "Dell ", STAC_DELL_BIOS), -- cgit v1.2.2 From ba0166708ef4da7eeb61dd92bbba4d5a749d6561 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 30 Sep 2008 05:32:24 -0700 Subject: sctp: Fix kernel panic while process protocol violation parameter Since call to function sctp_sf_abort_violation() need paramter 'arg' with 'struct sctp_chunk' type, it will read the chunk type and chunk length from the chunk_hdr member of chunk. But call to sctp_sf_violation_paramlen() always with 'struct sctp_paramhdr' type's parameter, it will be passed to sctp_sf_abort_violation(). This may cause kernel panic. sctp_sf_violation_paramlen() |-- sctp_sf_abort_violation() |-- sctp_make_abort_violation() This patch fixed this problem. This patch also fix two place which called sctp_sf_violation_paramlen() with wrong paramter type. Signed-off-by: Wei Yongjun Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- include/net/sctp/sm.h | 3 +++ net/sctp/sm_make_chunk.c | 37 ++++++++++++++++++++++++------------- net/sctp/sm_statefuns.c | 48 +++++++++++++++++++++++++++++++++++++----------- 3 files changed, 64 insertions(+), 24 deletions(-) diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h index 24811732bdb2..029a54a02396 100644 --- a/include/net/sctp/sm.h +++ b/include/net/sctp/sm.h @@ -227,6 +227,9 @@ struct sctp_chunk *sctp_make_abort_violation(const struct sctp_association *, const struct sctp_chunk *, const __u8 *, const size_t ); +struct sctp_chunk *sctp_make_violation_paramlen(const struct sctp_association *, + const struct sctp_chunk *, + struct sctp_paramhdr *); struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *, const struct sctp_transport *, const void *payload, diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index b599cbba4fbe..d68869f966c3 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -1012,6 +1012,29 @@ end: return retval; } +struct sctp_chunk *sctp_make_violation_paramlen( + const struct sctp_association *asoc, + const struct sctp_chunk *chunk, + struct sctp_paramhdr *param) +{ + struct sctp_chunk *retval; + static const char error[] = "The following parameter had invalid length:"; + size_t payload_len = sizeof(error) + sizeof(sctp_errhdr_t) + + sizeof(sctp_paramhdr_t); + + retval = sctp_make_abort(asoc, chunk, payload_len); + if (!retval) + goto nodata; + + sctp_init_cause(retval, SCTP_ERROR_PROTO_VIOLATION, + sizeof(error) + sizeof(sctp_paramhdr_t)); + sctp_addto_chunk(retval, sizeof(error), error); + sctp_addto_param(retval, sizeof(sctp_paramhdr_t), param); + +nodata: + return retval; +} + /* Make a HEARTBEAT chunk. */ struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *asoc, const struct sctp_transport *transport, @@ -1782,11 +1805,6 @@ static int sctp_process_inv_paramlength(const struct sctp_association *asoc, const struct sctp_chunk *chunk, struct sctp_chunk **errp) { - static const char error[] = "The following parameter had invalid length:"; - size_t payload_len = WORD_ROUND(sizeof(error)) + - sizeof(sctp_paramhdr_t); - - /* This is a fatal error. Any accumulated non-fatal errors are * not reported. */ @@ -1794,14 +1812,7 @@ static int sctp_process_inv_paramlength(const struct sctp_association *asoc, sctp_chunk_free(*errp); /* Create an error chunk and fill it in with our payload. */ - *errp = sctp_make_op_error_space(asoc, chunk, payload_len); - - if (*errp) { - sctp_init_cause(*errp, SCTP_ERROR_PROTO_VIOLATION, - sizeof(error) + sizeof(sctp_paramhdr_t)); - sctp_addto_chunk(*errp, sizeof(error), error); - sctp_addto_param(*errp, sizeof(sctp_paramhdr_t), param); - } + *errp = sctp_make_violation_paramlen(asoc, chunk, param); return 0; } diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 8848d329aa2c..7c622af2ce55 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -119,7 +119,7 @@ static sctp_disposition_t sctp_sf_violation_paramlen( const struct sctp_endpoint *ep, const struct sctp_association *asoc, const sctp_subtype_t type, - void *arg, + void *arg, void *ext, sctp_cmd_seq_t *commands); static sctp_disposition_t sctp_sf_violation_ctsn( @@ -3425,7 +3425,7 @@ sctp_disposition_t sctp_sf_do_asconf(const struct sctp_endpoint *ep, addr_param = (union sctp_addr_param *)hdr->params; length = ntohs(addr_param->p.length); if (length < sizeof(sctp_paramhdr_t)) - return sctp_sf_violation_paramlen(ep, asoc, type, + return sctp_sf_violation_paramlen(ep, asoc, type, arg, (void *)addr_param, commands); /* Verify the ASCONF chunk before processing it. */ @@ -3433,8 +3433,8 @@ sctp_disposition_t sctp_sf_do_asconf(const struct sctp_endpoint *ep, (sctp_paramhdr_t *)((void *)addr_param + length), (void *)chunk->chunk_end, &err_param)) - return sctp_sf_violation_paramlen(ep, asoc, type, - (void *)&err_param, commands); + return sctp_sf_violation_paramlen(ep, asoc, type, arg, + (void *)err_param, commands); /* ADDIP 5.2 E1) Compare the value of the serial number to the value * the endpoint stored in a new association variable @@ -3542,8 +3542,8 @@ sctp_disposition_t sctp_sf_do_asconf_ack(const struct sctp_endpoint *ep, (sctp_paramhdr_t *)addip_hdr->params, (void *)asconf_ack->chunk_end, &err_param)) - return sctp_sf_violation_paramlen(ep, asoc, type, - (void *)&err_param, commands); + return sctp_sf_violation_paramlen(ep, asoc, type, arg, + (void *)err_param, commands); if (last_asconf) { addip_hdr = (sctp_addiphdr_t *)last_asconf->subh.addip_hdr; @@ -4240,12 +4240,38 @@ static sctp_disposition_t sctp_sf_violation_paramlen( const struct sctp_endpoint *ep, const struct sctp_association *asoc, const sctp_subtype_t type, - void *arg, - sctp_cmd_seq_t *commands) { - static const char err_str[] = "The following parameter had invalid length:"; + void *arg, void *ext, + sctp_cmd_seq_t *commands) +{ + struct sctp_chunk *chunk = arg; + struct sctp_paramhdr *param = ext; + struct sctp_chunk *abort = NULL; - return sctp_sf_abort_violation(ep, asoc, arg, commands, err_str, - sizeof(err_str)); + if (sctp_auth_recv_cid(SCTP_CID_ABORT, asoc)) + goto discard; + + /* Make the abort chunk. */ + abort = sctp_make_violation_paramlen(asoc, chunk, param); + if (!abort) + goto nomem; + + sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); + SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS); + + sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, + SCTP_ERROR(ECONNABORTED)); + sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED, + SCTP_PERR(SCTP_ERROR_PROTO_VIOLATION)); + SCTP_DEC_STATS(SCTP_MIB_CURRESTAB); + +discard: + sctp_sf_pdiscard(ep, asoc, SCTP_ST_CHUNK(0), arg, commands); + + SCTP_INC_STATS(SCTP_MIB_ABORTEDS); + + return SCTP_DISPOSITION_ABORT; +nomem: + return SCTP_DISPOSITION_NOMEM; } /* Handle a protocol violation when the peer trying to advance the -- cgit v1.2.2 From de59985e3a623d4d5d6207f1777398ca0606ab1c Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 30 Sep 2008 11:02:12 -0700 Subject: x86: Fix broken LDT access in VMI After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be Signed-off-by: Zachary Amsden Cc: Ingo Molnar Cc: Glauber de Oliveira Costa Cc: Signed-off-by: Linus Torvalds --- arch/x86/kernel/vmi_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 6ca515d6db54..edfb09f30479 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -235,7 +235,7 @@ static void vmi_write_ldt_entry(struct desc_struct *dt, int entry, const void *desc) { u32 *ldt_entry = (u32 *)desc; - vmi_ops.write_idt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); + vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); } static void vmi_load_sp0(struct tss_struct *tss, -- cgit v1.2.2 From dc63b52673d71f9d49b9d72d263a9f32df18c3ee Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Tue, 30 Sep 2008 11:02:12 -0700 Subject: x86, vmi: fix broken LDT access This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. Signed-off-by: Zachary Amsden Cc: Glauber de Oliveira Costa Cc: stable@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/vmi_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 6ca515d6db54..edfb09f30479 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -235,7 +235,7 @@ static void vmi_write_ldt_entry(struct desc_struct *dt, int entry, const void *desc) { u32 *ldt_entry = (u32 *)desc; - vmi_ops.write_idt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); + vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]); } static void vmi_load_sp0(struct tss_struct *tss, -- cgit v1.2.2 From 4dd7972d1204c3851a4092cecd2207e05eb29b09 Mon Sep 17 00:00:00 2001 From: Vitaliy Gusev Date: Wed, 1 Oct 2008 01:51:39 -0700 Subject: tcp: Fix NULL dereference in tcp_4_send_ack() Fix NULL dereference in tcp_4_send_ack(). As skb->dev is reset to NULL in tcp_v4_rcv() thus OOPS occurs: BUG: unable to handle kernel NULL pointer dereference at 00000000000004d0 IP: [] tcp_v4_send_ack+0x203/0x250 Stack: ffff810005dbb000 ffff810015c8acc0 e77b2c6e5f861600 a01610802e90cb6d 0a08010100000000 88afffff88afffff 0000000080762be8 0000000115c872e8 0004122000000000 0000000000000001 ffffffff80762b88 0000000000000020 Call Trace: [] tcp_v4_reqsk_send_ack+0x20/0x22 [] tcp_check_req+0x108/0x14c [] ? rt_intern_hash+0x322/0x33c [] tcp_v4_do_rcv+0x399/0x4ec [] ? skb_checksum+0x4f/0x272 [] ? __inet_lookup_listener+0x14a/0x15c [] tcp_v4_rcv+0x6a1/0x701 [] ip_local_deliver_finish+0x157/0x24a [] ip_local_deliver+0x72/0x7c [] ip_rcv_finish+0x38d/0x3b2 [] ? scsi_io_completion+0x19d/0x39e [] ip_rcv+0x2a2/0x2e5 [] netif_receive_skb+0x293/0x303 [] process_backlog+0x80/0xd0 [] ? __rcu_process_callbacks+0x125/0x1b4 [] net_rx_action+0xb9/0x17f [] __do_softirq+0xa3/0x164 [] call_softirq+0x1c/0x28 [] do_softirq+0x34/0x72 [] local_bh_enable_ip+0x3f/0x50 [] _spin_unlock_bh+0x12/0x14 [] release_sock+0xb8/0xc1 [] inet_stream_connect+0x146/0x25c [] ? autoremove_wake_function+0x0/0x38 [] sys_connect+0x68/0x8e [] ? fd_install+0x5f/0x68 [] ? sock_map_fd+0x55/0x62 [] system_call_after_swapgs+0x7b/0x80 Code: 41 10 11 d0 83 d0 00 4d 85 ed 89 45 c0 c7 45 c4 08 00 00 00 74 07 41 8b 45 04 89 45 c8 48 8b 43 20 8b 4d b8 48 8d 55 b0 48 89 de <48> 8b 80 d0 04 00 00 48 8b b8 60 01 00 00 e8 20 ae fe ff 65 48 RIP [] tcp_v4_send_ack+0x203/0x250 RSP CR2: 00000000000004d0 Signed-off-by: Vitaliy Gusev Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 1b4fee20fc93..011478e46c40 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -618,7 +618,7 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack, ]; } rep; struct ip_reply_arg arg; - struct net *net = dev_net(skb->dev); + struct net *net = dev_net(skb->dst->dev); memset(&rep.th, 0, sizeof(struct tcphdr)); memset(&arg, 0, sizeof(arg)); -- cgit v1.2.2 From 2a5b82751f73a0bf6f604ce56d34adba6da1b246 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Wed, 1 Oct 2008 02:13:16 -0700 Subject: ipv6: NULL pointer dereferrence in tcp_v6_send_ack The following actions are possible: tcp_v6_rcv skb->dev = NULL; tcp_v6_do_rcv tcp_v6_hnd_req tcp_check_req req->rsk_ops->send_ack == tcp_v6_send_ack So, skb->dev can be NULL in tcp_v6_send_ack. We must obtain namespace from dst entry. Thanks to Vitaliy Gusev for initial problem finding in IPv4 code. Signed-off-by: Denis V. Lunev Signed-off-by: David S. Miller --- net/ipv6/tcp_ipv6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index b585c850a89a..10e22fd48222 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1050,7 +1050,7 @@ static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32 struct tcphdr *th = tcp_hdr(skb), *t1; struct sk_buff *buff; struct flowi fl; - struct net *net = dev_net(skb->dev); + struct net *net = dev_net(skb->dst->dev); struct sock *ctl_sk = net->ipv6.tcp_sk; unsigned int tot_len = sizeof(struct tcphdr); __be32 *topt; -- cgit v1.2.2 From 5dc121e9a7a8a3721cefeb07f3559f50fbedc67e Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Wed, 1 Oct 2008 02:37:56 -0700 Subject: XFRM,IPv6: initialize ip6_dst_blackhole_ops.kmem_cachep ip6_dst_blackhole_ops.kmem_cachep is not expected to be NULL (i.e. to be initialized) when dst_alloc() is called from ip6_dst_blackhole(). Otherwise, it results in the following (xfrm_larval_drop is now set to 1 by default): [ 78.697642] Unable to handle kernel paging request for data at address 0x0000004c [ 78.703449] Faulting instruction address: 0xc0097f54 [ 78.786896] Oops: Kernel access of bad area, sig: 11 [#1] [ 78.792791] PowerMac [ 78.798383] Modules linked in: btusb usbhid bluetooth b43 mac80211 cfg80211 ehci_hcd ohci_hcd sungem sungem_phy usbcore ssb [ 78.804263] NIP: c0097f54 LR: c0334a28 CTR: c002d430 [ 78.809997] REGS: eef19ad0 TRAP: 0300 Not tainted (2.6.27-rc5) [ 78.815743] MSR: 00001032 CR: 22242482 XER: 20000000 [ 78.821550] DAR: 0000004c, DSISR: 40000000 [ 78.827278] TASK = eef0df40[3035] 'mip6d' THREAD: eef18000 [ 78.827408] GPR00: 00001032 eef19b80 eef0df40 00000000 00008020 eef19c30 00000001 00000000 [ 78.833249] GPR08: eee5101c c05a5c10 ef9ad500 00000000 24242422 1005787c 00000000 1004f960 [ 78.839151] GPR16: 00000000 10024e90 10050040 48030018 0fe44150 00000000 00000000 eef19c30 [ 78.845046] GPR24: eef19e44 00000000 eef19bf8 efb37c14 eef19bf8 00008020 00009032 c0596064 [ 78.856671] NIP [c0097f54] kmem_cache_alloc+0x20/0x94 [ 78.862581] LR [c0334a28] dst_alloc+0x40/0xc4 [ 78.868451] Call Trace: [ 78.874252] [eef19b80] [c03c1810] ip6_dst_lookup_tail+0x1c8/0x1dc (unreliable) [ 78.880222] [eef19ba0] [c0334a28] dst_alloc+0x40/0xc4 [ 78.886164] [eef19bb0] [c03cd698] ip6_dst_blackhole+0x28/0x1cc [ 78.892090] [eef19be0] [c03d9be8] rawv6_sendmsg+0x75c/0xc88 [ 78.897999] [eef19cb0] [c038bca4] inet_sendmsg+0x4c/0x78 [ 78.903907] [eef19cd0] [c03207c8] sock_sendmsg+0xac/0xe4 [ 78.909734] [eef19db0] [c03209e4] sys_sendmsg+0x1e4/0x2a0 [ 78.915540] [eef19f00] [c03220a8] sys_socketcall+0xfc/0x210 [ 78.921406] [eef19f40] [c0014b3c] ret_from_syscall+0x0/0x38 [ 78.927295] --- Exception: c01 at 0xfe2d730 [ 78.927297] LR = 0xfe2d71c [ 78.939019] Instruction dump: [ 78.944835] 91640018 9144001c 900a0000 4bffff44 9421ffe0 7c0802a6 bf810010 7c9d2378 [ 78.950694] 90010024 7fc000a6 57c0045e 7c000124 <83e3004c> 8383005c 2f9f0000 419e0050 [ 78.956464] ---[ end trace 05fa1ed7972487a1 ]--- As commented by Benjamin Thery, the bug was introduced by f2fc6a54585a1be6669613a31fbaba2ecbadcd36, while adding network namespaces support to ipv6 routes. Signed-off-by: Arnaud Ebalard Acked-by: Benjamin Thery Signed-off-by: David S. Miller --- net/ipv6/route.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 9af6115f0f50..63442a1e741c 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2688,6 +2688,8 @@ int __init ip6_route_init(void) if (ret) goto out_kmem_cache; + ip6_dst_blackhole_ops.kmem_cachep = ip6_dst_ops_template.kmem_cachep; + /* Registering of the loopback is done before this portion of code, * the loopback reference in rt6_info will not be taken, do it * manually for init_net */ -- cgit v1.2.2 From 0523820482dcb42784572ffd2296c2f08c275a2b Mon Sep 17 00:00:00 2001 From: Timo Teras Date: Wed, 1 Oct 2008 05:17:54 -0700 Subject: af_key: Free dumping state on socket close Fix a xfrm_{state,policy}_walk leak if pfkey socket is closed while dumping is on-going. Signed-off-by: Timo Teras Signed-off-by: David S. Miller --- net/key/af_key.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/net/key/af_key.c b/net/key/af_key.c index d628df97e02e..b7f5a1c353ee 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -73,22 +73,18 @@ static int pfkey_can_dump(struct sock *sk) return 0; } -static int pfkey_do_dump(struct pfkey_sock *pfk) +static void pfkey_terminate_dump(struct pfkey_sock *pfk) { - int rc; - - rc = pfk->dump.dump(pfk); - if (rc == -ENOBUFS) - return 0; - - pfk->dump.done(pfk); - pfk->dump.dump = NULL; - pfk->dump.done = NULL; - return rc; + if (pfk->dump.dump) { + pfk->dump.done(pfk); + pfk->dump.dump = NULL; + pfk->dump.done = NULL; + } } static void pfkey_sock_destruct(struct sock *sk) { + pfkey_terminate_dump(pfkey_sk(sk)); skb_queue_purge(&sk->sk_receive_queue); if (!sock_flag(sk, SOCK_DEAD)) { @@ -310,6 +306,18 @@ static int pfkey_broadcast(struct sk_buff *skb, gfp_t allocation, return err; } +static int pfkey_do_dump(struct pfkey_sock *pfk) +{ + int rc; + + rc = pfk->dump.dump(pfk); + if (rc == -ENOBUFS) + return 0; + + pfkey_terminate_dump(pfk); + return rc; +} + static inline void pfkey_hdr_dup(struct sadb_msg *new, struct sadb_msg *orig) { *new = *orig; -- cgit v1.2.2 From 5037108acd4dc40c210321cc83b0bf8352eda95a Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 1 Oct 2008 14:39:17 +0100 Subject: dm: always allow one page in dm_merge_bvec Some callers assume they can always add at least one page to an empty bio, so dm_merge_bvec should not return 0 in this case: we'll reject the I/O later after the bio is submitted. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index bca448e11878..469cec54f371 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -837,10 +837,10 @@ static int dm_merge_bvec(struct request_queue *q, struct dm_table *map = dm_get_table(md); struct dm_target *ti; sector_t max_sectors; - int max_size; + int max_size = 0; if (unlikely(!map)) - return 0; + goto out; ti = dm_table_find_target(map, bvm->bi_sector); @@ -861,14 +861,15 @@ static int dm_merge_bvec(struct request_queue *q, if (max_size && ti->type->merge) max_size = ti->type->merge(ti, bvm, biovec, max_size); + dm_table_put(map); + +out: /* * Always allow an entire first page */ if (max_size <= biovec->bv_len && !(bvm->bi_size >> SECTOR_SHIFT)) max_size = biovec->bv_len; - dm_table_put(map); - return max_size; } -- cgit v1.2.2 From b01cd5ac43b00c49759c126c21e7d22c7e80b245 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Wed, 1 Oct 2008 14:39:24 +0100 Subject: dm: cope with access beyond end of device in dm_merge_bvec If for any reason dm_merge_bvec() is given an offset beyond the end of the device, avoid an oops and always allow one page to be added to an empty bio. We'll reject the I/O later after the bio is submitted. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 469cec54f371..ace998ce59f6 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -843,6 +843,8 @@ static int dm_merge_bvec(struct request_queue *q, goto out; ti = dm_table_find_target(map, bvm->bi_sector); + if (!dm_target_is_valid(ti)) + goto out_table; /* * Find maximum amount of I/O that won't need splitting @@ -861,6 +863,7 @@ static int dm_merge_bvec(struct request_queue *q, if (max_size && ti->type->merge) max_size = ti->type->merge(ti, bvm, biovec, max_size); +out_table: dm_table_put(map); out: -- cgit v1.2.2 From 7253a33434245ee8243897559188186df65f3611 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Wed, 1 Oct 2008 14:39:27 +0100 Subject: dm mpath: add missing path switching locking Moving the path activation to workqueue along with scsi_dh patches introduced a race. It is due to the fact that the current_pgpath (in the multipath data structure) can be modified if changes happen in any of the paths leading to the lun. If the changes lead to current_pgpath being set to NULL, then it leads to the invalid access which results in the panic below. This patch fixes that by storing the pgpath to activate in the multipath data structure and properly protecting it. Note that if activate_path is called twice in succession with different pgpath, with the second one being called before the first one is done, then activate path will be called twice for the second pgpath, which is fine. Unable to handle kernel paging request for data at address 0x00000020 Faulting instruction address: 0xd000000000aa1844 cpu 0x1: Vector: 300 (Data Access) at [c00000006b987a80] pc: d000000000aa1844: .activate_path+0x30/0x218 [dm_multipath] lr: c000000000087a2c: .run_workqueue+0x114/0x204 sp: c00000006b987d00 msr: 8000000000009032 dar: 20 dsisr: 40000000 current = 0xc0000000676bb3f0 paca = 0xc0000000006f3680 pid = 2528, comm = kmpath_handlerd enter ? for help [c00000006b987da0] c000000000087a2c .run_workqueue+0x114/0x204 [c00000006b987e40] c000000000088b58 .worker_thread+0x120/0x144 [c00000006b987f00] c00000000008ca70 .kthread+0x78/0xc4 [c00000006b987f90] c000000000027cc8 .kernel_thread+0x4c/0x68 Signed-off-by: Chandra Seetharaman Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 71dd65aa31b6..c2fcf28b4c70 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -63,6 +63,7 @@ struct multipath { const char *hw_handler_name; struct work_struct activate_path; + struct pgpath *pgpath_to_activate; unsigned nr_priority_groups; struct list_head priority_groups; unsigned pg_init_required; /* pg_init needs calling? */ @@ -146,6 +147,7 @@ static struct priority_group *alloc_priority_group(void) static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti) { + unsigned long flags; struct pgpath *pgpath, *tmp; struct multipath *m = ti->private; @@ -154,6 +156,10 @@ static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti) if (m->hw_handler_name) scsi_dh_detach(bdev_get_queue(pgpath->path.dev->bdev)); dm_put_device(ti, pgpath->path.dev); + spin_lock_irqsave(&m->lock, flags); + if (m->pgpath_to_activate == pgpath) + m->pgpath_to_activate = NULL; + spin_unlock_irqrestore(&m->lock, flags); free_pgpath(pgpath); } } @@ -421,6 +427,7 @@ static void process_queued_ios(struct work_struct *work) __choose_pgpath(m); pgpath = m->current_pgpath; + m->pgpath_to_activate = m->current_pgpath; if ((pgpath && !m->queue_io) || (!pgpath && !m->queue_if_no_path)) @@ -1093,8 +1100,15 @@ static void activate_path(struct work_struct *work) int ret; struct multipath *m = container_of(work, struct multipath, activate_path); - struct dm_path *path = &m->current_pgpath->path; + struct dm_path *path; + unsigned long flags; + spin_lock_irqsave(&m->lock, flags); + path = &m->pgpath_to_activate->path; + m->pgpath_to_activate = NULL; + spin_unlock_irqrestore(&m->lock, flags); + if (!path) + return; ret = scsi_dh_activate(bdev_get_queue(path->dev->bdev)); pg_init_done(path, ret); } -- cgit v1.2.2 From d6478fad430e37148b56f642c87301ba72476675 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 1 Oct 2008 13:47:06 +0100 Subject: MN10300: Fix IRQ handling Fix the IRQ handling on the MN10300 arch. This patch makes a number of significant changes: (1) It separates the irq_chip definition for edge-triggered interrupts from the one for level-triggered interrupts. This is necessary because the MN10300 PIC latches the IRQ channel's interrupt request bit (GxICR_REQUEST), even after the device has ceased to assert its interrupt line and the interrupt channel has been disabled in the PIC. So for level-triggered interrupts we need to clear this bit when we re-enable - which is achieved by setting GxICR_DETECT but not GxICR_REQUEST when writing to the register. Not doing this results in spurious interrupts occurring because calling mask_ack() at the start of handle_level_irq() is insufficient - it fails to clear the REQUEST latch because the device that caused the interrupt is still asserting its interrupt line at this point. (2) IRQ disablement [irq_chip::disable_irq()] shouldn't clear the interrupt request flag for edge-triggered interrupts lest it lose an interrupt. (3) IRQ unmasking [irq_chip::unmask_irq()] also shouldn't clear the interrupt request flag for edge-triggered interrupts lest it lose an interrupt. (4) The end() operation is now left to the default (no-operation) as __do_IRQ() is compiled out. This may affect misrouted_irq(), but according to Thomas Gleixner it's the correct thing to do. (5) handle_level_irq() is used for edge-triggered interrupts rather than handle_edge_irq() as the MN10300 PIC latches interrupt events even on masked IRQ channels, thus rendering IRQ_PENDING unnecessary. It is sufficient to call mask_ack() at the start and unmask() at the end. (6) For level-triggered interrupts, ack() is now NULL as it's not used, and there is no effective ACK function on the PIC. mask_ack() is now the same as mask() as the latch continues to latch, even when the channel is masked. Further, the patch discards the disable() op implementation as its now the same as the mask() op implementation, which is used instead. It also discards the enable() op implementations as they're now the same as the unmask() op implementations, which are used instead. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/irq.c | 71 ++++++++++++++++++++++------------- arch/mn10300/unit-asb2303/unit-init.c | 2 +- arch/mn10300/unit-asb2305/unit-init.c | 2 +- 3 files changed, 47 insertions(+), 28 deletions(-) diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 761c434a2488..56c64ccc9c21 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -20,22 +20,8 @@ EXPORT_SYMBOL(__mn10300_irq_enabled_epsw); atomic_t irq_err_count; /* - * MN10300 INTC controller operations + * MN10300 interrupt controller operations */ -static void mn10300_cpupic_disable(unsigned int irq) -{ - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; - tmp = GxICR(irq); -} - -static void mn10300_cpupic_enable(unsigned int irq) -{ - u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; - tmp = GxICR(irq); -} - static void mn10300_cpupic_ack(unsigned int irq) { u16 tmp; @@ -60,26 +46,54 @@ static void mn10300_cpupic_mask_ack(unsigned int irq) static void mn10300_cpupic_unmask(unsigned int irq) { u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; tmp = GxICR(irq); } -static void mn10300_cpupic_end(unsigned int irq) +static void mn10300_cpupic_unmask_clear(unsigned int irq) { + /* the MN10300 PIC latches its interrupt request bit, even after the + * device has ceased to assert its interrupt line and the interrupt + * channel has been disabled in the PIC, so for level-triggered + * interrupts we need to clear the request bit when we re-enable */ u16 tmp = GxICR(irq); - GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; + GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; tmp = GxICR(irq); } -static struct irq_chip mn10300_cpu_pic = { - .name = "cpu", - .disable = mn10300_cpupic_disable, - .enable = mn10300_cpupic_enable, +/* + * MN10300 PIC level-triggered IRQ handling. + * + * The PIC has no 'ACK' function per se. It is possible to clear individual + * channel latches, but each latch relatches whether or not the channel is + * masked, so we need to clear the latch when we unmask the channel. + * + * Also for this reason, we don't supply an ack() op (it's unused anyway if + * mask_ack() is provided), and mask_ack() just masks. + */ +static struct irq_chip mn10300_cpu_pic_level = { + .name = "cpu_l", + .disable = mn10300_cpupic_mask, + .enable = mn10300_cpupic_unmask_clear, + .ack = NULL, + .mask = mn10300_cpupic_mask, + .mask_ack = mn10300_cpupic_mask, + .unmask = mn10300_cpupic_unmask_clear, +}; + +/* + * MN10300 PIC edge-triggered IRQ handling. + * + * We use the latch clearing function of the PIC as the 'ACK' function. + */ +static struct irq_chip mn10300_cpu_pic_edge = { + .name = "cpu_e", + .disable = mn10300_cpupic_mask, + .enable = mn10300_cpupic_unmask, .ack = mn10300_cpupic_ack, .mask = mn10300_cpupic_mask, .mask_ack = mn10300_cpupic_mask_ack, .unmask = mn10300_cpupic_unmask, - .end = mn10300_cpupic_end, }; /* @@ -114,7 +128,8 @@ void set_intr_level(int irq, u16 level) */ void set_intr_postackable(int irq) { - set_irq_handler(irq, handle_level_irq); + set_irq_chip_and_handler(irq, &mn10300_cpu_pic_level, + handle_level_irq); } /* @@ -126,8 +141,12 @@ void __init init_IRQ(void) for (irq = 0; irq < NR_IRQS; irq++) if (irq_desc[irq].chip == &no_irq_type) - set_irq_chip_and_handler(irq, &mn10300_cpu_pic, - handle_edge_irq); + /* due to the PIC latching interrupt requests, even + * when the IRQ is disabled, IRQ_PENDING is superfluous + * and we can use handle_level_irq() for edge-triggered + * interrupts */ + set_irq_chip_and_handler(irq, &mn10300_cpu_pic_edge, + handle_level_irq); unit_init_IRQ(); } diff --git a/arch/mn10300/unit-asb2303/unit-init.c b/arch/mn10300/unit-asb2303/unit-init.c index 14b2c817cff8..70e8cb4ea266 100644 --- a/arch/mn10300/unit-asb2303/unit-init.c +++ b/arch/mn10300/unit-asb2303/unit-init.c @@ -51,7 +51,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq); + set_intr_postackable(XIRQ2IRQ(extnum)); break; default: break; diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index 6a352414a358..72812a9439ac 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -52,7 +52,7 @@ void __init unit_init_IRQ(void) switch (GET_XIRQ_TRIGGER(extnum)) { case XIRQ_TRIGGER_HILEVEL: case XIRQ_TRIGGER_LOWLEVEL: - set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq); + set_intr_postackable(XIRQ2IRQ(extnum)); break; default: break; -- cgit v1.2.2 From 20b918dc77b383e9779dafceee3f2198a6f7b0e5 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 1 Oct 2008 10:39:24 -0700 Subject: pxa2xx_spi: fix build breakage This patch fixes a build error in the pxa2xx-spi driver, introduced by commit 7e96445533ac3f4f7964646a202ff3620602fab4 ("pxa2xx_spi: dma bugfixes") CC drivers/spi/pxa2xx_spi.o drivers/spi/pxa2xx_spi.c: In function 'map_dma_buffers': drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c: In function 'pump_transfers': drivers/spi/pxa2xx_spi.c:897: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' [dbrownell@users.sourceforge.net: fix warning too ] Signed-off-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: David Brownell Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 0e53354c1cfe..d47d3636227f 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -49,7 +49,7 @@ MODULE_ALIAS("platform:pxa2xx-spi"); #define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) #define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) -#define IS_DMA_ALIGNED(x) (((x) & 0x07) == 0) +#define IS_DMA_ALIGNED(x) ((((u32)(x)) & 0x07) == 0) #define MAX_DMA_LEN 8191 /* @@ -896,7 +896,7 @@ static void pump_transfers(unsigned long data) || transfer->rx_dma || transfer->tx_dma) { dev_err(&drv_data->pdev->dev, "pump_transfers: mapped transfer length " - "of %lu is greater than %d\n", + "of %u is greater than %d\n", transfer->len, MAX_DMA_LEN); message->status = -EINVAL; giveback(drv_data); -- cgit v1.2.2 From 4a7703582836f55a1cbad0e2c1c6ebbee3f9b3a7 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 1 Oct 2008 17:18:35 -0700 Subject: e1000e: write protect ICHx NVM to prevent malicious write/erase Set the hardware to ignore all write/erase cycles to the GbE region in the ICHx NVM. This feature can be disabled by the WriteProtectNVM module parameter (enabled by default) only after a hardware reset, but the machine must be power cycled before trying to enable writes. Signed-off-by: Bruce Allan Signed-off-by: Jesse Brandeburg CC: arjan@linux.intel.com Signed-off-by: Linus Torvalds --- drivers/net/e1000e/e1000.h | 2 ++ drivers/net/e1000e/ethtool.c | 3 +++ drivers/net/e1000e/ich8lan.c | 58 ++++++++++++++++++++++++++++++++++++++++++++ drivers/net/e1000e/netdev.c | 10 +++++--- drivers/net/e1000e/param.c | 30 +++++++++++++++++++++++ 5 files changed, 100 insertions(+), 3 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index ac4e506b4f88..f0c48a2a6799 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -305,6 +305,7 @@ struct e1000_info { #define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5) #define FLAG_HAS_SWSM_ON_LOAD (1 << 6) #define FLAG_HAS_JUMBO_FRAMES (1 << 7) +#define FLAG_READ_ONLY_NVM (1 << 8) #define FLAG_IS_ICH (1 << 9) #define FLAG_HAS_SMART_POWER_DOWN (1 << 11) #define FLAG_IS_QUAD_PORT_A (1 << 12) @@ -385,6 +386,7 @@ extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw); extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw); extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state); +extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw); extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, bool state); extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index e21c9e0f3738..5ed8e13d5fed 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -529,6 +529,9 @@ static int e1000_set_eeprom(struct net_device *netdev, if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16))) return -EFAULT; + if (adapter->flags & FLAG_READ_ONLY_NVM) + return -EINVAL; + max_len = hw->nvm.word_size * 2; first_word = eeprom->offset >> 1; diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 9e38452a738c..d8efba884134 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -58,6 +58,7 @@ #define ICH_FLASH_HSFCTL 0x0006 #define ICH_FLASH_FADDR 0x0008 #define ICH_FLASH_FDATA0 0x0010 +#define ICH_FLASH_PR0 0x0074 #define ICH_FLASH_READ_COMMAND_TIMEOUT 500 #define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500 @@ -150,6 +151,19 @@ union ich8_hws_flash_regacc { u16 regval; }; +/* ICH Flash Protected Region */ +union ich8_flash_protected_range { + struct ich8_pr { + u32 base:13; /* 0:12 Protected Range Base */ + u32 reserved1:2; /* 13:14 Reserved */ + u32 rpe:1; /* 15 Read Protection Enable */ + u32 limit:13; /* 16:28 Protected Range Limit */ + u32 reserved2:2; /* 29:30 Reserved */ + u32 wpe:1; /* 31 Write Protection Enable */ + } range; + u32 regval; +}; + static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); @@ -1284,6 +1298,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) * programming failed. */ if (ret_val) { + /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ hw_dbg(hw, "Flash commit failed.\n"); e1000_release_swflag_ich8lan(hw); return ret_val; @@ -1373,6 +1388,49 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) return e1000e_validate_nvm_checksum_generic(hw); } +/** + * e1000e_write_protect_nvm_ich8lan - Make the NVM read-only + * @hw: pointer to the HW structure + * + * To prevent malicious write/erase of the NVM, set it to be read-only + * so that the hardware ignores all write/erase cycles of the NVM via + * the flash control registers. The shadow-ram copy of the NVM will + * still be updated, however any updates to this copy will not stick + * across driver reloads. + **/ +void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) +{ + union ich8_flash_protected_range pr0; + union ich8_hws_flash_status hsfsts; + u32 gfpreg; + s32 ret_val; + + ret_val = e1000_acquire_swflag_ich8lan(hw); + if (ret_val) + return; + + gfpreg = er32flash(ICH_FLASH_GFPREG); + + /* Write-protect GbE Sector of NVM */ + pr0.regval = er32flash(ICH_FLASH_PR0); + pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK; + pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK); + pr0.range.wpe = true; + ew32flash(ICH_FLASH_PR0, pr0.regval); + + /* + * Lock down a subset of GbE Flash Control Registers, e.g. + * PR0 to prevent the write-protection from being lifted. + * Once FLOCKDN is set, the registers protected by it cannot + * be written until FLOCKDN is cleared by a hardware reset. + */ + hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); + hsfsts.hsf_status.flockdn = true; + ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval); + + e1000_release_swflag_ich8lan(hw); +} + /** * e1000_write_flash_data_ich8lan - Writes bytes to the NVM * @hw: pointer to the HW structure diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index d266510c8a94..1f767feda9a7 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -47,7 +47,7 @@ #include "e1000.h" -#define DRV_VERSION "0.3.3.3-k2" +#define DRV_VERSION "0.3.3.3-k4" char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -4467,6 +4467,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->bd_number = cards_found++; + e1000e_check_options(adapter); + /* setup adapter struct */ err = e1000_sw_init(adapter); if (err) @@ -4482,6 +4484,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (err) goto err_hw_init; + if ((adapter->flags & FLAG_IS_ICH) && + (adapter->flags & FLAG_READ_ONLY_NVM)) + e1000e_write_protect_nvm_ich8lan(&adapter->hw); + hw->mac.ops.get_bus_info(&adapter->hw); adapter->hw.phy.autoneg_wait_to_complete = 0; @@ -4573,8 +4579,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, e1000_reset_task); INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); - e1000e_check_options(adapter); - /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; adapter->fc_autoneg = 1; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index ed912e023a72..d91dbf7ba434 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -133,6 +133,15 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); */ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); +/* + * Write Protect NVM + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); + struct e1000_option { enum { enable_option, range_option, list_option } type; const char *name; @@ -388,4 +397,25 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) opt.def); } } + { /* Write-protect NVM */ + const struct e1000_option opt = { + .type = enable_option, + .name = "Write-protect NVM", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; + + if (adapter->flags & FLAG_IS_ICH) { + if (num_WriteProtectNVM > bd) { + unsigned int write_protect_nvm = WriteProtectNVM[bd]; + e1000_validate_option(&write_protect_nvm, &opt, + adapter); + if (write_protect_nvm) + adapter->flags |= FLAG_READ_ONLY_NVM; + } else { + if (opt.def) + adapter->flags |= FLAG_READ_ONLY_NVM; + } + } + } } -- cgit v1.2.2 From 1fce2d01dff65a76cd08c1b145acd9d3c20021d2 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 2 Oct 2008 00:58:49 -0500 Subject: powerpc: Fix boot hang regression on MPC8544DS Commit 00c5372d37a78990c1530184a9c792ee60a30067 caused the MPC8544DS board to hang at boot. The MPC8544DS is unique in that it doesn't use the PCI slots on the ULI (unlike the MPC8572DS or MPC8610HPCD). So the dummy read at the end of the address space causes us to hang. We can detect the situation by comparing the bridge's BARs versus the root complex. Signed-off-by: Kumar Gala --- arch/powerpc/platforms/fsl_uli1575.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c index ef74a0763ec1..8c619963becc 100644 --- a/arch/powerpc/platforms/fsl_uli1575.c +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -219,11 +219,21 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev) int i; u8 *dummy; struct pci_bus *bus = dev->bus; + resource_size_t end = 0; + + for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) { + unsigned long flags = pci_resource_flags(dev, i); + if ((flags & (IORESOURCE_MEM|IORESOURCE_PREFETCH)) == IORESOURCE_MEM) + end = pci_resource_end(dev, i); + } for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { if ((bus->resource[i]) && (bus->resource[i]->flags & IORESOURCE_MEM)) { - dummy = ioremap(bus->resource[i]->end - 3, 0x4); + if (bus->resource[i]->end == end) + dummy = ioremap(bus->resource[i]->start, 0x4); + else + dummy = ioremap(bus->resource[i]->end - 3, 0x4); if (dummy) { in_8(dummy); iounmap(dummy); -- cgit v1.2.2 From 4037314afc6eea3eab7e0447884c12b57a081f63 Mon Sep 17 00:00:00 2001 From: Rob Sims Date: Wed, 1 Oct 2008 21:47:31 +0200 Subject: ASoC: Set correct name for WM8753 rec mixer output Rob Sims wrote: "I can't seem to turn on register 0x17, bit 3 in the sound chip, except by codec_reg_write; the mixer lacks direct or indirect control. It seems there are two names for the output of the rec mixer: Capture ST Mixer Playback Mixer Would the following do the trick?" I confirm that this solves the audio problems I was having. Signed-off-by: Jonas Bonn Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/codecs/wm8753.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 5761164fe16d..e873414840c8 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -583,7 +583,7 @@ static const struct snd_soc_dapm_route audio_map[] = { /* out 4 */ {"Out4 Mux", "VREF", "VREF"}, - {"Out4 Mux", "Capture ST", "Capture ST Mixer"}, + {"Out4 Mux", "Capture ST", "Playback Mixer"}, {"Out4 Mux", "LOUT2", "LOUT2"}, {"Out 4", NULL, "Out4 Mux"}, {"OUT4", NULL, "Out 4"}, @@ -607,7 +607,7 @@ static const struct snd_soc_dapm_route audio_map[] = { /* Capture Right Mux */ {"Capture Right Mux", "PGA", "Right Capture Volume"}, {"Capture Right Mux", "Line or RXP-RXN", "Line Right Mux"}, - {"Capture Right Mux", "Sidetone", "Capture ST Mixer"}, + {"Capture Right Mux", "Sidetone", "Playback Mixer"}, /* Mono Capture mixer-mux */ {"Capture Right Mixer", "Stereo", "Capture Right Mux"}, -- cgit v1.2.2 From 4dbf95ba6c344186ec6d38ff514dc675da464bec Mon Sep 17 00:00:00 2001 From: Risto Suominen Date: Mon, 25 Aug 2008 08:02:12 +0200 Subject: ALSA: snd-powermac: mixers for PowerMac G4 AGP Add mixer controls for PowerMac G4 AGP (Screamer). This patch fixes the regression in the recent snd-powermac which doesn't support some G3/G4 PowerMacs: http://lkml.org/lkml/2008/10/1/220 Signed-off-by: Risto Suominen Tested-by: Mariusz Kozlowski Cc: stable@kernel.org Signed-off-by: Takashi Iwai --- sound/ppc/awacs.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c index 566a6d0daf4a..543d4f1784a5 100644 --- a/sound/ppc/awacs.c +++ b/sound/ppc/awacs.c @@ -621,6 +621,13 @@ static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __initdata = { AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), }; +static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __initdata = { + AWACS_VOLUME("Line out Playback Volume", 2, 6, 1), + AWACS_VOLUME("Master Playback Volume", 5, 6, 1), + AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), + AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0), +}; + static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __initdata = { AWACS_VOLUME("Line out Playback Volume", 2, 6, 1), AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), @@ -768,6 +775,7 @@ static void snd_pmac_awacs_resume(struct snd_pmac *chip) #define IS_IMAC (machine_is_compatible("PowerMac2,1") \ || machine_is_compatible("PowerMac2,2") \ || machine_is_compatible("PowerMac4,1")) +#define IS_G4AGP (machine_is_compatible("PowerMac3,1")) static int imac; @@ -850,6 +858,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip) { int pm7500 = IS_PM7500; int beige = IS_BEIGE; + int g4agp = IS_G4AGP; int err, vol; imac = IS_IMAC; @@ -939,7 +948,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip) snd_pmac_awacs_mixers); if (err < 0) return err; - if (beige) + if (beige || g4agp) ; else if (chip->model == PMAC_SCREAMER) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers2), @@ -961,13 +970,17 @@ snd_pmac_awacs_init(struct snd_pmac *chip) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers_imac), snd_pmac_screamer_mixers_imac); + else if (g4agp) + err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_screamer_mixers_g4agp), + snd_pmac_screamer_mixers_g4agp); else err = build_mixers(chip, ARRAY_SIZE(snd_pmac_awacs_mixers_pmac), snd_pmac_awacs_mixers_pmac); if (err < 0) return err; - chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac) + chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac || g4agp) ? &snd_pmac_awacs_master_sw_imac : &snd_pmac_awacs_master_sw, chip); err = snd_ctl_add(chip->card, chip->master_sw_ctl); @@ -1012,7 +1025,7 @@ snd_pmac_awacs_init(struct snd_pmac *chip) return err; } - if (beige) + if (beige || g4agp) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mic_boost_beige), snd_pmac_screamer_mic_boost_beige); -- cgit v1.2.2 From 030b655b062fe5190fc490e0091ea50307d7a86f Mon Sep 17 00:00:00 2001 From: Risto Suominen Date: Mon, 25 Aug 2008 08:04:23 +0200 Subject: ALSA: snd-powermac: HP detection for 1st iMac G3 SL Correct headphone detection for 1st generation iMac G3 Slot-loading (Screamer). This patch fixes the regression in the recent snd-powermac which doesn't support some G3/G4 PowerMacs: http://lkml.org/lkml/2008/10/1/220 Signed-off-by: Risto Suominen Tested-by: Mariusz Kozlowski Cc: stable@kernel.org Signed-off-by: Takashi Iwai --- sound/ppc/awacs.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c index 543d4f1784a5..106c48225bba 100644 --- a/sound/ppc/awacs.c +++ b/sound/ppc/awacs.c @@ -695,7 +695,10 @@ static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __initdata = { static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __initdata = AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_SPKMUTE, 1); -static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac __initdata = +static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __initdata = +AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 1); + +static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __initdata = AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 0); @@ -772,12 +775,12 @@ static void snd_pmac_awacs_resume(struct snd_pmac *chip) #define IS_PM7500 (machine_is_compatible("AAPL,7500")) #define IS_BEIGE (machine_is_compatible("AAPL,Gossamer")) -#define IS_IMAC (machine_is_compatible("PowerMac2,1") \ - || machine_is_compatible("PowerMac2,2") \ +#define IS_IMAC1 (machine_is_compatible("PowerMac2,1")) +#define IS_IMAC2 (machine_is_compatible("PowerMac2,2") \ || machine_is_compatible("PowerMac4,1")) #define IS_G4AGP (machine_is_compatible("PowerMac3,1")) -static int imac; +static int imac1, imac2; #ifdef PMAC_SUPPORT_AUTOMUTE /* @@ -823,13 +826,18 @@ static void snd_pmac_awacs_update_automute(struct snd_pmac *chip, int do_notify) { int reg = chip->awacs_reg[1] | (MASK_HDMUTE | MASK_SPKMUTE); - if (imac) { + if (imac1) { + reg &= ~MASK_SPKMUTE; + reg |= MASK_PAROUT1; + } else if (imac2) { reg &= ~MASK_SPKMUTE; reg &= ~MASK_PAROUT1; } if (snd_pmac_awacs_detect_headphone(chip)) reg &= ~MASK_HDMUTE; - else if (imac) + else if (imac1) + reg &= ~MASK_PAROUT1; + else if (imac2) reg |= MASK_PAROUT1; else reg &= ~MASK_SPKMUTE; @@ -859,9 +867,12 @@ snd_pmac_awacs_init(struct snd_pmac *chip) int pm7500 = IS_PM7500; int beige = IS_BEIGE; int g4agp = IS_G4AGP; + int imac; int err, vol; - imac = IS_IMAC; + imac1 = IS_IMAC1; + imac2 = IS_IMAC2; + imac = imac1 || imac2; /* looks like MASK_GAINLINE triggers something, so we set here * as start-up */ @@ -1017,8 +1028,10 @@ snd_pmac_awacs_init(struct snd_pmac *chip) snd_pmac_awacs_speaker_vol); if (err < 0) return err; - chip->speaker_sw_ctl = snd_ctl_new1(imac - ? &snd_pmac_awacs_speaker_sw_imac + chip->speaker_sw_ctl = snd_ctl_new1(imac1 + ? &snd_pmac_awacs_speaker_sw_imac1 + : imac2 + ? &snd_pmac_awacs_speaker_sw_imac2 : &snd_pmac_awacs_speaker_sw, chip); err = snd_ctl_add(chip->card, chip->speaker_sw_ctl); if (err < 0) -- cgit v1.2.2 From 08650869e0ec581f8d88cfdb563d37f5383abfe2 Mon Sep 17 00:00:00 2001 From: David Winn Date: Thu, 2 Oct 2008 14:50:11 -0700 Subject: fbcon: fix monochrome color value calculation Commit 22af89aa0c0b4012a7431114a340efd3665a7617 ("fbcon: replace mono_col macro with static inline") changed the order of operations for computing monochrome color values. This generates 0xffff000f instead of 0x0000000f for a 4 bit monochrome color, leading to image corruption if it is passed to cfb_imageblit or other similar functions. Fix it up. Cc: Harvey Harrison Cc: "Antonino A. Daplas" Cc: Krzysztof Helt Cc: [2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h index a6e38e9ea73f..89a346880ec0 100644 --- a/drivers/video/console/fbcon.h +++ b/drivers/video/console/fbcon.h @@ -110,7 +110,7 @@ static inline int mono_col(const struct fb_info *info) __u32 max_len; max_len = max(info->var.green.length, info->var.red.length); max_len = max(info->var.blue.length, max_len); - return ~(0xfff << (max_len & 0xff)); + return (~(0xfff << max_len)) & 0xff; } static inline int attr_col_ec(int shift, struct vc_data *vc, -- cgit v1.2.2 From 16dbc6c9616363fe53811abcbd935336dc0a0f01 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 2 Oct 2008 14:50:12 -0700 Subject: inotify: fix lock ordering wrt do_page_fault's mmap_sem Fix inotify lock order reversal with mmap_sem due to holding locks over copy_to_user. Signed-off-by: Nick Piggin Reported-by: "Daniel J Blueman" Tested-by: "Daniel J Blueman" Cc: Ingo Molnar Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/inotify_user.c | 27 ++++++++++++++++++++------- include/asm-x86/uaccess_64.h | 1 + 2 files changed, 21 insertions(+), 7 deletions(-) diff --git a/fs/inotify_user.c b/fs/inotify_user.c index 60249429a253..d85c7d931cdf 100644 --- a/fs/inotify_user.c +++ b/fs/inotify_user.c @@ -323,7 +323,7 @@ out: } /* - * remove_kevent - cleans up and ultimately frees the given kevent + * remove_kevent - cleans up the given kevent * * Caller must hold dev->ev_mutex. */ @@ -334,7 +334,13 @@ static void remove_kevent(struct inotify_device *dev, dev->event_count--; dev->queue_size -= sizeof(struct inotify_event) + kevent->event.len; +} +/* + * free_kevent - frees the given kevent. + */ +static void free_kevent(struct inotify_kernel_event *kevent) +{ kfree(kevent->name); kmem_cache_free(event_cachep, kevent); } @@ -350,6 +356,7 @@ static void inotify_dev_event_dequeue(struct inotify_device *dev) struct inotify_kernel_event *kevent; kevent = inotify_dev_get_event(dev); remove_kevent(dev, kevent); + free_kevent(kevent); } } @@ -433,17 +440,15 @@ static ssize_t inotify_read(struct file *file, char __user *buf, dev = file->private_data; while (1) { - int events; prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE); mutex_lock(&dev->ev_mutex); - events = !list_empty(&dev->events); - mutex_unlock(&dev->ev_mutex); - if (events) { + if (!list_empty(&dev->events)) { ret = 0; break; } + mutex_unlock(&dev->ev_mutex); if (file->f_flags & O_NONBLOCK) { ret = -EAGAIN; @@ -462,7 +467,6 @@ static ssize_t inotify_read(struct file *file, char __user *buf, if (ret) return ret; - mutex_lock(&dev->ev_mutex); while (1) { struct inotify_kernel_event *kevent; @@ -481,6 +485,13 @@ static ssize_t inotify_read(struct file *file, char __user *buf, } break; } + remove_kevent(dev, kevent); + + /* + * Must perform the copy_to_user outside the mutex in order + * to avoid a lock order reversal with mmap_sem. + */ + mutex_unlock(&dev->ev_mutex); if (copy_to_user(buf, &kevent->event, event_size)) { ret = -EFAULT; @@ -498,7 +509,9 @@ static ssize_t inotify_read(struct file *file, char __user *buf, count -= kevent->event.len; } - remove_kevent(dev, kevent); + free_kevent(kevent); + + mutex_lock(&dev->ev_mutex); } mutex_unlock(&dev->ev_mutex); diff --git a/include/asm-x86/uaccess_64.h b/include/asm-x86/uaccess_64.h index 515d4dce96b5..45806d60bcbe 100644 --- a/include/asm-x86/uaccess_64.h +++ b/include/asm-x86/uaccess_64.h @@ -7,6 +7,7 @@ #include #include #include +#include #include /* -- cgit v1.2.2 From c0c9209ddd96bc4f1d70a8b9958710671e076080 Mon Sep 17 00:00:00 2001 From: Pascal Terjan Date: Thu, 2 Oct 2008 14:50:13 -0700 Subject: braille_console: only register notifiers when the braille console is used Only register the braille driver VT and keyboard notifiers when the braille console is used. Avoids eating insert or backspace keys. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11242 Signed-off-by: Pascal Terjan Signed-off-by: Samuel Thibault Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/accessibility/braille/braille_console.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c index 0a5f6b2114c5..d672cfe7ca59 100644 --- a/drivers/accessibility/braille/braille_console.c +++ b/drivers/accessibility/braille/braille_console.c @@ -376,6 +376,8 @@ int braille_register_console(struct console *console, int index, console->flags |= CON_ENABLED; console->index = index; braille_co = console; + register_keyboard_notifier(&keyboard_notifier_block); + register_vt_notifier(&vt_notifier_block); return 0; } @@ -383,15 +385,8 @@ int braille_unregister_console(struct console *console) { if (braille_co != console) return -EINVAL; + unregister_keyboard_notifier(&keyboard_notifier_block); + unregister_vt_notifier(&vt_notifier_block); braille_co = NULL; return 0; } - -static int __init braille_init(void) -{ - register_keyboard_notifier(&keyboard_notifier_block); - register_vt_notifier(&vt_notifier_block); - return 0; -} - -console_initcall(braille_init); -- cgit v1.2.2 From aa94fbd5ccd840c8ab26d02439ec799b03a72547 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 2 Oct 2008 14:50:14 -0700 Subject: fix error-path NULL deref in alloc_posix_timer() Found by static checker (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter Acked-by: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/posix-timers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c index e36d5798cbff..5131e5471169 100644 --- a/kernel/posix-timers.c +++ b/kernel/posix-timers.c @@ -441,7 +441,7 @@ static struct k_itimer * alloc_posix_timer(void) return tmr; if (unlikely(!(tmr->sigq = sigqueue_alloc()))) { kmem_cache_free(posix_timers_cache, tmr); - tmr = NULL; + return NULL; } memset(&tmr->sigq->info, 0, sizeof(siginfo_t)); return tmr; -- cgit v1.2.2 From 6c1b7f680dd4f550fa6f91f148cc6fa2c4bd0737 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Thu, 2 Oct 2008 14:50:16 -0700 Subject: memory hotplug: missing zone->lock in test_pages_isolated() __test_page_isolated_in_pageblock() in mm/page_isolation.c has a comment saying that the caller must hold zone->lock. But the only caller of that function, test_pages_isolated(), does not hold zone->lock and the lock is also not acquired anywhere before. This patch adds the missing zone->lock to test_pages_isolated(). We reproducibly run into BUG_ON(!PageBuddy(page)) in __offline_isolated_pages() during memory hotplug stress test, see trace below. This patch fixes that problem, it would be good if we could have it in 2.6.27. kernel BUG at /home/autobuild/BUILD/linux-2.6.26-20080909/mm/page_alloc.c:4561! illegal operation: 0001 [#1] PREEMPT SMP Modules linked in: dm_multipath sunrpc bonding qeth_l3 dm_mod qeth ccwgroup vmur CPU: 1 Not tainted 2.6.26-29.x.20080909-s390default #1 Process memory_loop_all (pid: 10025, task: 2f444028, ksp: 2b10dd28) Krnl PSW : 040c0000 801727ea (__offline_isolated_pages+0x18e/0x1c4) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 Krnl GPRS: 00000000 7e27fc00 00000000 7e27fc00 00000000 00000400 00014000 7e27fc01 00606f00 7e27fc00 00013fe0 2b10dd28 00000005 80172662 801727b2 2b10dd28 Krnl Code: 801727de: 5810900c l %r1,12(%r9) 801727e2: a7f4ffb3 brc 15,80172748 801727e6: a7f40001 brc 15,801727e8 >801727ea: a7f4ffbc brc 15,80172762 801727ee: a7f40001 brc 15,801727f0 801727f2: a7f4ffaf brc 15,80172750 801727f6: 0707 bcr 0,%r7 801727f8: 0017 unknown Call Trace: ([<0000000000172772>] __offline_isolated_pages+0x116/0x1c4) [<00000000001953a2>] offline_isolated_pages_cb+0x22/0x34 [<000000000013164c>] walk_memory_resource+0xcc/0x11c [<000000000019520e>] offline_pages+0x36a/0x498 [<00000000001004d6>] remove_memory+0x36/0x44 [<000000000028fb06>] memory_block_change_state+0x112/0x150 [<000000000028ffb8>] store_mem_state+0x90/0xe4 [<0000000000289c00>] sysdev_store+0x34/0x40 [<00000000001ee048>] sysfs_write_file+0xd0/0x178 [<000000000019b1a8>] vfs_write+0x74/0x118 [<000000000019b9ae>] sys_write+0x46/0x7c [<000000000011160e>] sysc_do_restart+0x12/0x16 [<0000000077f3e8ca>] 0x77f3e8ca Signed-off-by: Gerald Schaefer Acked-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_isolation.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/mm/page_isolation.c b/mm/page_isolation.c index c69f84fe038d..b70a7fec1ff6 100644 --- a/mm/page_isolation.c +++ b/mm/page_isolation.c @@ -114,8 +114,10 @@ __test_page_isolated_in_pageblock(unsigned long pfn, unsigned long end_pfn) int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn) { - unsigned long pfn; + unsigned long pfn, flags; struct page *page; + struct zone *zone; + int ret; pfn = start_pfn; /* @@ -131,7 +133,9 @@ int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn) if (pfn < end_pfn) return -EBUSY; /* Check all pages are free or Marked as ISOLATED */ - if (__test_page_isolated_in_pageblock(start_pfn, end_pfn)) - return 0; - return -EBUSY; + zone = page_zone(pfn_to_page(pfn)); + spin_lock_irqsave(&zone->lock, flags); + ret = __test_page_isolated_in_pageblock(start_pfn, end_pfn); + spin_unlock_irqrestore(&zone->lock, flags); + return ret ? 0 : -EBUSY; } -- cgit v1.2.2 From 4b19de6d1cb07c8bcb6778e771f9cfd5bcfdfd3e Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 2 Oct 2008 14:50:16 -0700 Subject: mm: tiny-shmem nommu fix The previous patch db203d53d474aa068984e409d807628f5841da1b ("mm: tiny-shmem fix lock ordering: mmap_sem vs i_mutex") to fix the lock ordering in tiny-shmem breaks shared anonymous and IPC memory on NOMMU architectures because it was using the expanding truncate to signal ramfs to allocate a physically contiguous RAM backing the inode (otherwise it is unusable for "memory mapping" it to userspace). However do_truncate is what caused the lock ordering error, due to it taking i_mutex. In this case, we can actually just call ramfs directly to allocate memory for the mapping, rather than go via truncate. Acked-by: David Howells Acked-by: Hugh Dickins Signed-off-by: Nick Piggin Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ramfs/file-nommu.c | 2 +- include/linux/ramfs.h | 1 + mm/tiny-shmem.c | 6 ++++++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c index 52312ec93ff4..5145cb9125af 100644 --- a/fs/ramfs/file-nommu.c +++ b/fs/ramfs/file-nommu.c @@ -58,7 +58,7 @@ const struct inode_operations ramfs_file_inode_operations = { * size 0 on the assumption that it's going to be used for an mmap of shared * memory */ -static int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize) +int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize) { struct pagevec lru_pvec; unsigned long npages, xpages, loop, limit; diff --git a/include/linux/ramfs.h b/include/linux/ramfs.h index b160fb18e8d6..37aaf2b39863 100644 --- a/include/linux/ramfs.h +++ b/include/linux/ramfs.h @@ -6,6 +6,7 @@ extern int ramfs_get_sb(struct file_system_type *fs_type, int flags, const char *dev_name, void *data, struct vfsmount *mnt); #ifndef CONFIG_MMU +extern int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize); extern unsigned long ramfs_nommu_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, diff --git a/mm/tiny-shmem.c b/mm/tiny-shmem.c index d17cb6f6ab10..8d7a27a6335c 100644 --- a/mm/tiny-shmem.c +++ b/mm/tiny-shmem.c @@ -80,6 +80,12 @@ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags) inode->i_nlink = 0; /* It is unlinked */ init_file(file, shm_mnt, dentry, FMODE_WRITE | FMODE_READ, &ramfs_file_operations); + +#ifndef CONFIG_MMU + error = ramfs_nommu_expand_for_mapping(inode, size); + if (error) + goto close_file; +#endif return file; close_file: -- cgit v1.2.2 From 6babc32c41e3642d875372cb6afbd9ade7a9f311 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Thu, 2 Oct 2008 14:50:18 -0700 Subject: mm: handle initialising compound pages at orders greater than MAX_ORDER When we initialise a compound page we initialise the page flags and head page pointer for all base pages spanned by that page. When we initialise a gigantic page (a page of order greater than or equal to MAX_ORDER) we have to initialise more than MAX_ORDER_NR_PAGES pages. Currently we assume that all elements of the mem_map in this page are contigious in memory. However this is only guarenteed out to MAX_ORDER_NR_PAGES pages, and with SPARSEMEM enabled they will not be contigious. This leads us to walk off the end of the first section and scribble on everything which follows, BAD. When we reach a MAX_ORDER_NR_PAGES boundary we much locate the next section of the mem_map. As gigantic pages can only be maximally aligned we know this will occur at exact multiple of MAX_ORDER_NR_PAGES pages from the start of the page. This is a bug fix for the gigantic page support in hugetlbfs. Credit to Mel Gorman for spotting the issue. Signed-off-by: Andy Whitcroft Cc: Mel Gorman Cc: Jon Tollefson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index e293c58bea58..27b8681139fd 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -268,13 +268,14 @@ void prep_compound_page(struct page *page, unsigned long order) { int i; int nr_pages = 1 << order; + struct page *p = page + 1; set_compound_page_dtor(page, free_compound_page); set_compound_order(page, order); __SetPageHead(page); - for (i = 1; i < nr_pages; i++) { - struct page *p = page + i; - + for (i = 1; i < nr_pages; i++, p++) { + if (unlikely((i & (MAX_ORDER_NR_PAGES - 1)) == 0)) + p = pfn_to_page(page_to_pfn(page) + i); __SetPageTail(p); p->first_page = page; } @@ -284,6 +285,7 @@ static void destroy_compound_page(struct page *page, unsigned long order) { int i; int nr_pages = 1 << order; + struct page *p = page + 1; if (unlikely(compound_order(page) != order)) bad_page(page); @@ -291,8 +293,9 @@ static void destroy_compound_page(struct page *page, unsigned long order) if (unlikely(!PageHead(page))) bad_page(page); __ClearPageHead(page); - for (i = 1; i < nr_pages; i++) { - struct page *p = page + i; + for (i = 1; i < nr_pages; i++, p++) { + if (unlikely((i & (MAX_ORDER_NR_PAGES - 1)) == 0)) + p = pfn_to_page(page_to_pfn(page) + i); if (unlikely(!PageTail(p) | (p->first_page != page))) -- cgit v1.2.2 From 37f40239f49fbc0b489d0327a700fee5b3898ac2 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 2 Oct 2008 16:33:20 -0700 Subject: e1000e: reset swflag after resetting hardware in the process of debugging things, noticed that the swflag is not reset by the driver after reset, and the swflag is probably not reset unless management firmware clears it after 100ms. Signed-off-by: Jesse Brandeburg Signed-off-by: Linus Torvalds --- drivers/net/e1000e/ich8lan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index d8efba884134..f4b6744d71df 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1778,6 +1778,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); + /* release the swflag because it is not reset by hardware reset */ + e1000_release_swflag_ich8lan(hw); + ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) { /* -- cgit v1.2.2 From a8f88ff5a5abc2ce9f7d7d2694178b2c617d713a Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 2 Oct 2008 16:33:25 -0700 Subject: e1000e: do not ever sleep in interrupt context e1000e was apparently calling two functions that attempted to reserve the SWFLAG bit for exclusive (to hardware and firmware) access to the PHY and NVM (aka eeprom). These accesses could possibly call msleep to wait for the resource which is not allowed from interrupt context. Signed-off-by: Jesse Brandeburg Acked-by: Thomas Gleixner Tested-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- drivers/net/e1000e/e1000.h | 2 ++ drivers/net/e1000e/netdev.c | 31 ++++++++++++++++++++++++++++--- 2 files changed, 30 insertions(+), 3 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index f0c48a2a6799..8087bda97218 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -284,6 +284,8 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; + struct work_struct downshift_task; + struct work_struct update_phy_task; }; struct e1000_info { diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 1f767feda9a7..803545b2fc8c 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1115,6 +1115,14 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter) writel(0, adapter->hw.hw_addr + rx_ring->tail); } +static void e1000e_downshift_workaround(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, downshift_task); + + e1000e_gig_downshift_workaround_ich8lan(&adapter->hw); +} + /** * e1000_intr_msi - Interrupt Handler * @irq: interrupt number @@ -1139,7 +1147,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); + schedule_work(&adapter->downshift_task); /* * 80003ES2LAN workaround-- For packet buffer work-around on @@ -1205,7 +1213,7 @@ static irqreturn_t e1000_intr(int irq, void *data) */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) - e1000e_gig_downshift_workaround_ich8lan(hw); + schedule_work(&adapter->downshift_task); /* * 80003ES2LAN workaround-- @@ -2912,6 +2920,21 @@ static int e1000_set_mac(struct net_device *netdev, void *p) return 0; } +/** + * e1000e_update_phy_task - work thread to update phy + * @work: pointer to our work struct + * + * this worker thread exists because we must acquire a + * semaphore to read the phy, which we could msleep while + * waiting for it, and we can't msleep in a timer. + **/ +static void e1000e_update_phy_task(struct work_struct *work) +{ + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, update_phy_task); + e1000_get_phy_info(&adapter->hw); +} + /* * Need to wait a few seconds after link up to get diagnostic information from * the phy @@ -2919,7 +2942,7 @@ static int e1000_set_mac(struct net_device *netdev, void *p) static void e1000_update_phy_info(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; - e1000_get_phy_info(&adapter->hw); + schedule_work(&adapter->update_phy_task); } /** @@ -4578,6 +4601,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, e1000_reset_task); INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); + INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); + INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; -- cgit v1.2.2 From 23033fad5be0a2c7838cb9e1579919b64af713f6 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 2 Oct 2008 16:33:30 -0700 Subject: e1000e: remove phy read from inside spinlock thanks to tglx, we're finding some interesting reentrancy issues. this patch removes the phy read from inside a spinlock, paving the way for removing the spinlock completely. The phy read was only feeding a statistic that wasn't used. Signed-off-by: Jesse Brandeburg Acked-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- drivers/net/e1000e/ethtool.c | 6 +++++- drivers/net/e1000e/netdev.c | 13 ------------- 2 files changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 5ed8e13d5fed..33a3ff17b5d0 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -432,6 +432,10 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[11] = er32(TIDV); regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */ + + /* ethtool doesn't use anything past this point, so all this + * code is likely legacy junk for apps that may or may not + * exist */ if (hw->phy.type == e1000_phy_m88) { e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); regs_buff[13] = (u32)phy_data; /* cable length */ @@ -447,7 +451,7 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[22] = adapter->phy_stats.receive_errors; regs_buff[23] = regs_buff[13]; /* mdix mode */ } - regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */ + regs_buff[21] = 0; /* was idle_errors */ e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); regs_buff[24] = (u32)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 803545b2fc8c..835b692e4fe3 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2954,9 +2954,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; unsigned long irq_flags; - u16 phy_tmp; - -#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF /* * Prevent stats update while adapter is being reset, or if the pci @@ -3045,15 +3042,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) /* Tx Dropped needs to be maintained elsewhere */ - /* Phy Stats */ - if (hw->phy.media_type == e1000_media_type_copper) { - if ((adapter->link_speed == SPEED_1000) && - (!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) { - phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; - adapter->phy_stats.idle_errors += phy_tmp; - } - } - /* Management Stats */ adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); @@ -3073,7 +3061,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) int ret_val; unsigned long irq_flags; - spin_lock_irqsave(&adapter->stats_lock, irq_flags); if ((er32(STATUS) & E1000_STATUS_LU) && -- cgit v1.2.2 From 4fa7553a075918e1e02a6039f9e826c8872b7049 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 2 Oct 2008 16:33:35 -0700 Subject: e1000e: drop stats lock the stats lock is left over from e1000, e1000e no longer has the adjust tbi stats function that required the addition of the stats lock to begin with. adding a mutex to acquire_swflag helped catch this one too. Signed-off-by: Jesse Brandeburg Acked-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- drivers/net/e1000e/e1000.h | 1 - drivers/net/e1000e/netdev.c | 18 ------------------ 2 files changed, 19 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 8087bda97218..5ea6b60fa377 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -257,7 +257,6 @@ struct e1000_adapter { struct net_device *netdev; struct pci_dev *pdev; struct net_device_stats net_stats; - spinlock_t stats_lock; /* prevent concurrent stats updates */ /* structs defined in e1000_hw.h */ struct e1000_hw hw; diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 835b692e4fe3..01e95580d4ae 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2600,8 +2600,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) /* Explicitly disable IRQ since the NIC can be in any state. */ e1000_irq_disable(adapter); - spin_lock_init(&adapter->stats_lock); - set_bit(__E1000_DOWN, &adapter->state); return 0; @@ -2953,7 +2951,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; - unsigned long irq_flags; /* * Prevent stats update while adapter is being reset, or if the pci @@ -2964,14 +2961,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) if (pci_channel_offline(pdev)) return; - spin_lock_irqsave(&adapter->stats_lock, irq_flags); - - /* - * these counters are modified from e1000_adjust_tbi_stats, - * called from the interrupt context, so they must only - * be written while holding adapter->stats_lock - */ - adapter->stats.crcerrs += er32(CRCERRS); adapter->stats.gprc += er32(GPRC); adapter->stats.gorc += er32(GORCL); @@ -3046,8 +3035,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.mgptc += er32(MGTPTC); adapter->stats.mgprc += er32(MGTPRC); adapter->stats.mgpdc += er32(MGTPDC); - - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); } /** @@ -3059,9 +3046,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_phy_regs *phy = &adapter->phy_regs; int ret_val; - unsigned long irq_flags; - - spin_lock_irqsave(&adapter->stats_lock, irq_flags); if ((er32(STATUS) & E1000_STATUS_LU) && (adapter->hw.phy.media_type == e1000_media_type_copper)) { @@ -3092,8 +3076,6 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) phy->stat1000 = 0; phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF); } - - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); } static void e1000_print_link_info(struct e1000_adapter *adapter) -- cgit v1.2.2 From 717d438d1fde94decef874b9808379d1f4523453 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 2 Oct 2008 16:33:40 -0700 Subject: e1000e: debug contention on NVM SWFLAG This patch adds a mutex to the e1000e driver that would help catch any collisions of two e1000e threads accessing hardware at the same time. description and patch updated by Jesse Signed-off-by: Thomas Gleixner Signed-off-by: Jesse Brandeburg Signed-off-by: Linus Torvalds --- drivers/net/e1000e/ich8lan.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index f4b6744d71df..0b6095ba3ce9 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -380,6 +380,9 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) return 0; } +static DEFINE_MUTEX(nvm_mutex); +static pid_t nvm_owner = -1; + /** * e1000_acquire_swflag_ich8lan - Acquire software control flag * @hw: pointer to the HW structure @@ -393,6 +396,15 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) u32 extcnf_ctrl; u32 timeout = PHY_CFG_TIMEOUT; + WARN_ON(preempt_count()); + + if (!mutex_trylock(&nvm_mutex)) { + WARN(1, KERN_ERR "e1000e mutex contention. Owned by pid %d\n", + nvm_owner); + mutex_lock(&nvm_mutex); + } + nvm_owner = current->pid; + while (timeout) { extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; @@ -407,6 +419,8 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) if (!timeout) { hw_dbg(hw, "FW or HW has locked the resource for too long.\n"); + nvm_owner = -1; + mutex_unlock(&nvm_mutex); return -E1000_ERR_CONFIG; } @@ -428,6 +442,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); + + nvm_owner = -1; + mutex_unlock(&nvm_mutex); } /** -- cgit v1.2.2 From 6f92a6a7ddba5ae7ca0f0255d46410465dcf2ba6 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 2 Oct 2008 16:33:45 -0700 Subject: e1000e: update version from k4 to k6 Signed-off-by: Jesse Brandeburg Signed-off-by: Linus Torvalds --- drivers/net/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 01e95580d4ae..b81c4237b5d3 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -47,7 +47,7 @@ #include "e1000.h" -#define DRV_VERSION "0.3.3.3-k4" +#define DRV_VERSION "0.3.3.3-k6" char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; -- cgit v1.2.2 From b5ff7df3df9efab511244d5a299fce706c71af48 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 2 Oct 2008 18:52:51 -0700 Subject: Check mapped ranges on sysfs resource files This is loosely based on a patch by Jesse Barnes to check the user-space PCI mappings though the sysfs interfaces. Quoting Jesse's original explanation: It's fairly common for applications to map PCI resources through sysfs. However, with the current implementation, it's possible for an application to map far more than the range corresponding to the resourceN file it opened. This patch plugs that hole by checking the range at mmap time, similar to what is done on platforms like sparc64 in their lower level PCI remapping routines. It was initially put together to help debug the e1000e NVRAM corruption problem, since we initially thought an X driver might be walking past the end of one of its mappings and clobbering the NVRAM. It now looks like that's not the case, but doing the check is still important for obvious reasons. and this version of the patch differs in that it uses a helper function to clarify the code, and does all the checks in pages (instead of bytes) in order to avoid overflows when doing "<< PAGE_SHIFT" etc. Acked-by: Jesse Barnes Signed-off-by: Linus Torvalds --- drivers/pci/pci-sysfs.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 9c718583a237..77baff022f71 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -16,6 +16,7 @@ #include +#include #include #include #include @@ -484,6 +485,21 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, #endif /* HAVE_PCI_LEGACY */ #ifdef HAVE_PCI_MMAP + +static int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma) +{ + unsigned long nr, start, size; + + nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; + start = vma->vm_pgoff; + size = pci_resource_len(pdev, resno) >> PAGE_SHIFT; + if (start < size && size - start >= nr) + return 1; + WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n", + current->comm, start, start+nr, pci_name(pdev), resno, size); + return 0; +} + /** * pci_mmap_resource - map a PCI resource into user memory space * @kobj: kobject for mapping @@ -510,6 +526,9 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, if (i >= PCI_ROM_RESOURCE) return -ENODEV; + if (!pci_mmap_fits(pdev, i, vma)) + return -EINVAL; + /* pci_mmap_page_range() expects the same kind of entry as coming * from /proc/bus/pci/ which is a "user visible" value. If this is * different from the resource itself, arch will do necessary fixup. -- cgit v1.2.2 From 95b866d5afcafee00fc9ad70665e48c86d8c4e0f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 3 Oct 2008 09:18:17 -0700 Subject: e1000e: Fix incorrect debug warning Doing 'WARN_ON(preempt_count())' was horribly horribly wrong, and would cause tons of warnings at bootup if PREEMPT was enabled because the initcalls currently run with the kernel lock, which increments the preempt count. At the same time, the warning was also insufficient, since it didn't check that interrupts were enabled. The proper debug function to use for something that can sleep and wants a warning if it's called in the wrong context is 'might_sleep()'. Reported-by: Christian Borntraeger Signed-off-by: Linus Torvalds --- drivers/net/e1000e/ich8lan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 0b6095ba3ce9..bcd2bc477af2 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -396,7 +396,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) u32 extcnf_ctrl; u32 timeout = PHY_CFG_TIMEOUT; - WARN_ON(preempt_count()); + might_sleep(); if (!mutex_trylock(&nvm_mutex)) { WARN(1, KERN_ERR "e1000e mutex contention. Owned by pid %d\n", -- cgit v1.2.2 From b7e4226e4f427b59dc8e9c45a2a1a1ed1353a140 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 1 Oct 2008 21:52:41 +0100 Subject: [MIPS] Build fix: Fix irq flags type Though from a hardware perspective it would be sensible to use only a 32-bit unsigned int type Linux defines interrupt flags to be stored in an unsigned long and nothing else. Signed-off-by: Ralf Baechle --- arch/mips/kernel/ptrace.c | 2 +- arch/mips/kernel/smtc.c | 6 +++--- include/asm-mips/mipsregs.h | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 35234b92b9a5..96ffc9c6d194 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -238,7 +238,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case FPC_EIR: { /* implementation / version register */ unsigned int flags; #ifdef CONFIG_MIPS_MT_SMTC - unsigned int irqflags; + unsigned long irqflags; unsigned int mtflags; #endif /* CONFIG_MIPS_MT_SMTC */ diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index a516286532ab..05f2708a9029 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -556,7 +556,7 @@ void mipsmt_prepare_cpus(void) void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) { extern u32 kernelsp[NR_CPUS]; - long flags; + unsigned long flags; int mtflags; LOCK_MT_PRA(); @@ -753,7 +753,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) { int tcstatus; struct smtc_ipi *pipi; - long flags; + unsigned long flags; int mtflags; if (cpu == smp_processor_id()) { @@ -975,7 +975,7 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm) struct smtc_ipi *pipi; unsigned long tcstatus; int sent; - long flags; + unsigned long flags; unsigned int mtflags; unsigned int vpflags; diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index a46f8e258e6b..979866000da4 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -1462,7 +1462,7 @@ set_c0_##name(unsigned int set) \ { \ unsigned int res; \ unsigned int omt; \ - unsigned int flags; \ + unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ @@ -1480,7 +1480,7 @@ clear_c0_##name(unsigned int clear) \ { \ unsigned int res; \ unsigned int omt; \ - unsigned int flags; \ + unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ @@ -1498,7 +1498,7 @@ change_c0_##name(unsigned int change, unsigned int new) \ { \ unsigned int res; \ unsigned int omt; \ - unsigned int flags; \ + unsigned long flags; \ \ local_irq_save(flags); \ \ -- cgit v1.2.2 From 498a863fdfb3e60d2e0e964cd202c2030bda1005 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 1 Oct 2008 22:23:52 +0100 Subject: [MIPS] SMTC: Build fix: Fix filename in Makefile Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index 3b7dd722c32a..cef2db8d2225 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -15,6 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK) += malta-console.o obj-$(CONFIG_PCI) += malta-pci.o # FIXME FIXME FIXME -obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o +obj-$(CONFIG_MIPS_MT_SMTC) += malta-smtc.o EXTRA_CFLAGS += -Werror -- cgit v1.2.2 From 9cc123631b6630948eb5059d218f44424888daa7 Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 9 Sep 2008 21:33:36 +0200 Subject: [MIPS] SMTC: Fix holes in SMTC and FPU affinity support. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-mt-fpaff.c | 2 +- arch/mips/kernel/process.c | 19 +++++++++---------- arch/mips/kernel/traps.c | 6 ++++-- 3 files changed, 14 insertions(+), 13 deletions(-) diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c index df4d3f2f740c..dc9eb72ed9de 100644 --- a/arch/mips/kernel/mips-mt-fpaff.c +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -159,7 +159,7 @@ __setup("fpaff=", fpaff_thresh); /* * FPU Use Factor empirically derived from experiments on 34K */ -#define FPUSEFACTOR 333 +#define FPUSEFACTOR 2000 static __init int mt_fp_affinity_init(void) { diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index ce7684335a41..22fc19bbe87f 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -55,7 +55,7 @@ void __noreturn cpu_idle(void) while (1) { tick_nohz_stop_sched_tick(1); while (!need_resched()) { -#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG +#ifdef CONFIG_MIPS_MT_SMTC extern void smtc_idle_loop_hook(void); smtc_idle_loop_hook(); @@ -145,19 +145,18 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, */ p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1); childregs->cp0_status &= ~(ST0_CU2|ST0_CU1); + +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC restores TCStatus after Status, and the CU bits + * are aliased there. + */ + childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1); +#endif clear_tsk_thread_flag(p, TIF_USEDFPU); #ifdef CONFIG_MIPS_MT_FPAFF clear_tsk_thread_flag(p, TIF_FPUBOUND); - - /* - * FPU affinity support is cleaner if we track the - * user-visible CPU affinity from the very beginning. - * The generic cpus_allowed mask will already have - * been copied from the parent before copy_thread - * is invoked. - */ - p->thread.user_cpus_allowed = p->cpus_allowed; #endif /* CONFIG_MIPS_MT_FPAFF */ if (clone_flags & CLONE_SETTLS) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 5fd0cd020af5..b602ac6eb47d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -825,8 +825,10 @@ static void mt_ase_fp_affinity(void) if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) { cpumask_t tmask; - cpus_and(tmask, current->thread.user_cpus_allowed, - mt_fpu_cpumask); + current->thread.user_cpus_allowed + = current->cpus_allowed; + cpus_and(tmask, current->cpus_allowed, + mt_fpu_cpumask); set_cpus_allowed(current, tmask); set_thread_flag(TIF_FPUBOUND); } -- cgit v1.2.2 From d2bb01b042a38219fbddaafc214c5beb96248d2f Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 9 Sep 2008 21:35:01 +0200 Subject: [MIPS] SMTC: Close tiny holes in the SMTC IPI replay system. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/kernel/entry.S | 10 +++--- arch/mips/kernel/smtc.c | 2 +- include/asm-mips/stackframe.h | 72 ++++++++++++++++++++++++++++++++++++------- 3 files changed, 67 insertions(+), 17 deletions(-) diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index e29598ae939d..ffa331029e08 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -79,11 +79,6 @@ FEXPORT(syscall_exit) FEXPORT(restore_all) # restore full frame #ifdef CONFIG_MIPS_MT_SMTC -/* Detect and execute deferred IPI "interrupts" */ - LONG_L s0, TI_REGS($28) - LONG_S sp, TI_REGS($28) - jal deferred_smtc_ipi - LONG_S s0, TI_REGS($28) #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP /* Re-arm any temporarily masked interrupts not explicitly "acked" */ mfc0 v0, CP0_TCSTATUS @@ -112,6 +107,11 @@ FEXPORT(restore_all) # restore full frame xor t0, t0, t3 mtc0 t0, CP0_TCCONTEXT #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ +/* Detect and execute deferred IPI "interrupts" */ + LONG_L s0, TI_REGS($28) + LONG_S sp, TI_REGS($28) + jal deferred_smtc_ipi + LONG_S s0, TI_REGS($28) #endif /* CONFIG_MIPS_MT_SMTC */ .set noat RESTORE_TEMP diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 05f2708a9029..39b491b9ad87 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -70,7 +70,7 @@ static atomic_t ipi_timer_latch[NR_CPUS]; #define IPIBUF_PER_CPU 4 -static struct smtc_ipi_q IPIQ[NR_CPUS]; +struct smtc_ipi_q IPIQ[NR_CPUS]; static struct smtc_ipi_q freeIPIq; diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h index 051e1af0bb95..4c37c4e5f72e 100644 --- a/include/asm-mips/stackframe.h +++ b/include/asm-mips/stackframe.h @@ -297,14 +297,31 @@ #ifdef CONFIG_MIPS_MT_SMTC .set mips32r2 /* - * This may not really be necessary if ints are already - * inhibited here. + * We need to make sure the read-modify-write + * of Status below isn't perturbed by an interrupt + * or cross-TC access, so we need to do at least a DMT, + * protected by an interrupt-inhibit. But setting IXMT + * also creates a few-cycle window where an IPI could + * be queued and not be detected before potentially + * returning to a WAIT or user-mode loop. It must be + * replayed. + * + * We're in the middle of a context switch, and + * we can't dispatch it directly without trashing + * some registers, so we'll try to detect this unlikely + * case and program a software interrupt in the VPE, + * as would be done for a cross-VPE IPI. To accomodate + * the handling of that case, we're doing a DVPE instead + * of just a DMT here to protect against other threads. + * This is a lot of cruft to cover a tiny window. + * If you can find a better design, implement it! + * */ mfc0 v0, CP0_TCSTATUS ori v0, TCSTATUS_IXMT mtc0 v0, CP0_TCSTATUS _ehb - DMT 5 # dmt a1 + DVPE 5 # dvpe a1 jal mips_ihb #endif /* CONFIG_MIPS_MT_SMTC */ mfc0 a0, CP0_STATUS @@ -325,17 +342,50 @@ */ LONG_L v1, PT_TCSTATUS(sp) _ehb - mfc0 v0, CP0_TCSTATUS + mfc0 a0, CP0_TCSTATUS andi v1, TCSTATUS_IXMT - /* We know that TCStatua.IXMT should be set from above */ - xori v0, v0, TCSTATUS_IXMT - or v0, v0, v1 - mtc0 v0, CP0_TCSTATUS - _ehb - andi a1, a1, VPECONTROL_TE + bnez v1, 0f + +/* + * We'd like to detect any IPIs queued in the tiny window + * above and request an software interrupt to service them + * when we ERET. + * + * Computing the offset into the IPIQ array of the executing + * TC's IPI queue in-line would be tedious. We use part of + * the TCContext register to hold 16 bits of offset that we + * can add in-line to find the queue head. + */ + mfc0 v0, CP0_TCCONTEXT + la a2, IPIQ + srl v0, v0, 16 + addu a2, a2, v0 + LONG_L v0, 0(a2) + beqz v0, 0f +/* + * If we have a queue, provoke dispatch within the VPE by setting C_SW1 + */ + mfc0 v0, CP0_CAUSE + ori v0, v0, C_SW1 + mtc0 v0, CP0_CAUSE +0: + /* + * This test should really never branch but + * let's be prudent here. Having atomized + * the shared register modifications, we can + * now EVPE, and must do so before interrupts + * are potentially re-enabled. + */ + andi a1, a1, MVPCONTROL_EVP beqz a1, 1f - emt + evpe 1: + /* We know that TCStatua.IXMT should be set from above */ + xori a0, a0, TCSTATUS_IXMT + or a0, a0, v1 + mtc0 a0, CP0_TCSTATUS + _ehb + .set mips0 #endif /* CONFIG_MIPS_MT_SMTC */ LONG_L v1, PT_EPC(sp) -- cgit v1.2.2 From 8531a35e5e275b17c57c39b7911bc2b37025f28c Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 9 Sep 2008 21:48:52 +0200 Subject: [MIPS] SMTC: Fix SMTC dyntick support. Rework of SMTC support to make it work with the new clock event system, allowing "tickless" operation, and to make it compatible with the use of the "wait_irqoff" idle loop. The new clocking scheme means that the previously optional IPI instant replay mechanism is now required, and has been made more robust. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 26 +--- arch/mips/kernel/Makefile | 1 + arch/mips/kernel/cevt-r4k.c | 173 ++++++--------------- arch/mips/kernel/cevt-smtc.c | 321 +++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/cpu-probe.c | 10 +- arch/mips/kernel/genex.S | 4 +- arch/mips/kernel/smtc.c | 252 +++++++++++++++--------------- arch/mips/mti-malta/malta-smtc.c | 9 +- include/asm-mips/cevt-r4k.h | 46 ++++++ include/asm-mips/irqflags.h | 26 +++- include/asm-mips/smtc.h | 8 +- 11 files changed, 597 insertions(+), 279 deletions(-) create mode 100644 arch/mips/kernel/cevt-smtc.c create mode 100644 include/asm-mips/cevt-r4k.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 49896a2a1d72..c930b8ceb418 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1403,7 +1403,6 @@ config MIPS_MT_SMTC depends on CPU_MIPS32_R2 #depends on CPU_MIPS64_R2 # once there is hardware ... depends on SYS_SUPPORTS_MULTITHREADING - select GENERIC_CLOCKEVENTS_BROADCAST select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_IRQ_EI select MIPS_MT @@ -1451,32 +1450,17 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. -config MIPS_MT_SMTC_INSTANT_REPLAY - bool "Low-latency Dispatch of Deferred SMTC IPIs" - depends on MIPS_MT_SMTC && !PREEMPT - default y - help - SMTC pseudo-interrupts between TCs are deferred and queued - if the target TC is interrupt-inhibited (IXMT). In the first - SMTC prototypes, these queued IPIs were serviced on return - to user mode, or on entry into the kernel idle loop. The - INSTANT_REPLAY option dispatches them as part of local_irq_restore() - processing, which adds runtime overhead (hence the option to turn - it off), but ensures that IPIs are handled promptly even under - heavy I/O interrupt load. - config MIPS_MT_SMTC_IM_BACKSTOP bool "Use per-TC register bits as backstop for inhibited IM bits" depends on MIPS_MT_SMTC - default y + default n help To support multiple TC microthreads acting as "CPUs" within a VPE, VPE-wide interrupt mask bits must be specially manipulated during interrupt handling. To support legacy drivers and interrupt controller management code, SMTC has a "backstop" to track and if necessary restore the interrupt mask. This has some performance - impact on interrupt service overhead. Disable it only if you know - what you are doing. + impact on interrupt service overhead. config MIPS_MT_SMTC_IRQAFF bool "Support IRQ affinity API" @@ -1486,10 +1470,8 @@ config MIPS_MT_SMTC_IRQAFF Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.) for SMTC Linux kernel. Requires platform support, of which an example can be found in the MIPS kernel i8259 and Malta - platform code. It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY - be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to - interrupt dispatch, and should be used only if you know what - you are doing. + platform code. Adds some overhead to interrupt dispatch, and + should be used only if you know what you are doing. config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 706f93974797..25775cb54000 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -10,6 +10,7 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o +obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 24a2d907aa0d..4a4c59f2737a 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -12,6 +12,14 @@ #include #include +#include + +/* + * The SMTC Kernel for the 34K, 1004K, et. al. replaces several + * of these routines with SMTC-specific variants. + */ + +#ifndef CONFIG_MIPS_MT_SMTC static int mips_next_event(unsigned long delta, struct clock_event_device *evt) @@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta, unsigned int cnt; int res; -#ifdef CONFIG_MIPS_MT_SMTC - { - unsigned long flags, vpflags; - local_irq_save(flags); - vpflags = dvpe(); -#endif cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; -#ifdef CONFIG_MIPS_MT_SMTC - evpe(vpflags); - local_irq_restore(flags); - } -#endif return res; } -static void mips_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +#endif /* CONFIG_MIPS_MT_SMTC */ + +void mips_set_clock_mode(enum clock_event_mode mode, + struct clock_event_device *evt) { /* Nothing to do ... */ } -static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); -static int cp0_timer_irq_installed; +DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); +int cp0_timer_irq_installed; -/* - * Timer ack for an R4k-compatible timer of a known frequency. - */ -static void c0_timer_ack(void) -{ - write_c0_compare(read_c0_compare()); -} +#ifndef CONFIG_MIPS_MT_SMTC -/* - * Possibly handle a performance counter interrupt. - * Return true if the timer interrupt should not be checked - */ -static inline int handle_perf_irq(int r2) -{ - /* - * The performance counter overflow interrupt may be shared with the - * timer interrupt (cp0_perfcount_irq < 0). If it is and a - * performance counter has overflowed (perf_irq() == IRQ_HANDLED) - * and we can't reliably determine if a counter interrupt has also - * happened (!r2) then don't check for a timer interrupt. - */ - return (cp0_perfcount_irq < 0) && - perf_irq() == IRQ_HANDLED && - !r2; -} - -static irqreturn_t c0_compare_interrupt(int irq, void *dev_id) +irqreturn_t c0_compare_interrupt(int irq, void *dev_id) { const int r2 = cpu_has_mips_r2; struct clock_event_device *cd; @@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id) * interrupt. Being the paranoiacs we are we check anyway. */ if (!r2 || (read_c0_cause() & (1 << 30))) { - c0_timer_ack(); -#ifdef CONFIG_MIPS_MT_SMTC - if (cpu_data[cpu].vpe_id) - goto out; - cpu = 0; -#endif + /* Clear Count/Compare Interrupt */ + write_c0_compare(read_c0_compare()); cd = &per_cpu(mips_clockevent_device, cpu); cd->event_handler(cd); } @@ -107,65 +78,16 @@ out: return IRQ_HANDLED; } -static struct irqaction c0_compare_irqaction = { +#endif /* Not CONFIG_MIPS_MT_SMTC */ + +struct irqaction c0_compare_irqaction = { .handler = c0_compare_interrupt, -#ifdef CONFIG_MIPS_MT_SMTC - .flags = IRQF_DISABLED, -#else .flags = IRQF_DISABLED | IRQF_PERCPU, -#endif .name = "timer", }; -#ifdef CONFIG_MIPS_MT_SMTC -DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device); - -static void smtc_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ -} - -static void mips_broadcast(cpumask_t mask) -{ - unsigned int cpu; - - for_each_cpu_mask(cpu, mask) - smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); -} - -static void setup_smtc_dummy_clockevent_device(void) -{ - //uint64_t mips_freq = mips_hpt_^frequency; - unsigned int cpu = smp_processor_id(); - struct clock_event_device *cd; - cd = &per_cpu(smtc_dummy_clockevent_device, cpu); - - cd->name = "SMTC"; - cd->features = CLOCK_EVT_FEAT_DUMMY; - - /* Calculate the min / max delta */ - cd->mult = 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32); - cd->shift = 0; //32; - cd->max_delta_ns = 0; //clockevent_delta2ns(0x7fffffff, cd); - cd->min_delta_ns = 0; //clockevent_delta2ns(0x30, cd); - - cd->rating = 200; - cd->irq = 17; //-1; -// if (cpu) -// cd->cpumask = CPU_MASK_ALL; // cpumask_of_cpu(cpu); -// else - cd->cpumask = cpumask_of_cpu(cpu); - - cd->set_mode = smtc_set_mode; - - cd->broadcast = mips_broadcast; - - clockevents_register_device(cd); -} -#endif - -static void mips_event_handler(struct clock_event_device *dev) +void mips_event_handler(struct clock_event_device *dev) { } @@ -177,7 +99,23 @@ static int c0_compare_int_pending(void) return (read_c0_cause() >> cp0_compare_irq) & 0x100; } -static int c0_compare_int_usable(void) +/* + * Compare interrupt can be routed and latched outside the core, + * so a single execution hazard barrier may not be enough to give + * it time to clear as seen in the Cause register. 4 time the + * pipeline depth seems reasonably conservative, and empirically + * works better in configurations with high CPU/bus clock ratios. + */ + +#define compare_change_hazard() \ + do { \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + irq_disable_hazard(); \ + } while (0) + +int c0_compare_int_usable(void) { unsigned int delta; unsigned int cnt; @@ -187,7 +125,7 @@ static int c0_compare_int_usable(void) */ if (c0_compare_int_pending()) { write_c0_compare(read_c0_count()); - irq_disable_hazard(); + compare_change_hazard(); if (c0_compare_int_pending()) return 0; } @@ -196,7 +134,7 @@ static int c0_compare_int_usable(void) cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); - irq_disable_hazard(); + compare_change_hazard(); if ((int)(read_c0_count() - cnt) < 0) break; /* increase delta if the timer was already expired */ @@ -205,11 +143,12 @@ static int c0_compare_int_usable(void) while ((int)(read_c0_count() - cnt) <= 0) ; /* Wait for expiry */ + compare_change_hazard(); if (!c0_compare_int_pending()) return 0; write_c0_compare(read_c0_count()); - irq_disable_hazard(); + compare_change_hazard(); if (c0_compare_int_pending()) return 0; @@ -219,6 +158,8 @@ static int c0_compare_int_usable(void) return 1; } +#ifndef CONFIG_MIPS_MT_SMTC + int __cpuinit mips_clockevent_init(void) { uint64_t mips_freq = mips_hpt_frequency; @@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void) if (!cpu_has_counter || !mips_hpt_frequency) return -ENXIO; -#ifdef CONFIG_MIPS_MT_SMTC - setup_smtc_dummy_clockevent_device(); - - /* - * On SMTC we only register VPE0's compare interrupt as clockevent - * device. - */ - if (cpu) - return 0; -#endif - if (!c0_compare_int_usable()) return -ENXIO; @@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void) cd->rating = 300; cd->irq = irq; -#ifdef CONFIG_MIPS_MT_SMTC - cd->cpumask = CPU_MASK_ALL; -#else cd->cpumask = cpumask_of_cpu(cpu); -#endif cd->set_next_event = mips_next_event; - cd->set_mode = mips_set_mode; + cd->set_mode = mips_set_clock_mode; cd->event_handler = mips_event_handler; clockevents_register_device(cd); @@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void) cp0_timer_irq_installed = 1; -#ifdef CONFIG_MIPS_MT_SMTC -#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq) - setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT); -#else setup_irq(irq, &c0_compare_irqaction); -#endif return 0; } + +#endif /* Not CONFIG_MIPS_MT_SMTC */ diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c new file mode 100644 index 000000000000..5162fe4b5952 --- /dev/null +++ b/arch/mips/kernel/cevt-smtc.c @@ -0,0 +1,321 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 MIPS Technologies, Inc. + * Copyright (C) 2007 Ralf Baechle + * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl + */ +#include +#include +#include + +#include +#include +#include + +/* + * Variant clock event timer support for SMTC on MIPS 34K, 1004K + * or other MIPS MT cores. + * + * Notes on SMTC Support: + * + * SMTC has multiple microthread TCs pretending to be Linux CPUs. + * But there's only one Count/Compare pair per VPE, and Compare + * interrupts are taken opportunisitically by available TCs + * bound to the VPE with the Count register. The new timer + * framework provides for global broadcasts, but we really + * want VPE-level multicasts for best behavior. So instead + * of invoking the high-level clock-event broadcast code, + * this version of SMTC support uses the historical SMTC + * multicast mechanisms "under the hood", appearing to the + * generic clock layer as if the interrupts are per-CPU. + * + * The approach taken here is to maintain a set of NR_CPUS + * virtual timers, and track which "CPU" needs to be alerted + * at each event. + * + * It's unlikely that we'll see a MIPS MT core with more than + * 2 VPEs, but we *know* that we won't need to handle more + * VPEs than we have "CPUs". So NCPUs arrays of NCPUs elements + * is always going to be overkill, but always going to be enough. + */ + +unsigned long smtc_nexttime[NR_CPUS][NR_CPUS]; +static int smtc_nextinvpe[NR_CPUS]; + +/* + * Timestamps stored are absolute values to be programmed + * into Count register. Valid timestamps will never be zero. + * If a Zero Count value is actually calculated, it is converted + * to be a 1, which will introduce 1 or two CPU cycles of error + * roughly once every four billion events, which at 1000 HZ means + * about once every 50 days. If that's actually a problem, one + * could alternate squashing 0 to 1 and to -1. + */ + +#define MAKEVALID(x) (((x) == 0L) ? 1L : (x)) +#define ISVALID(x) ((x) != 0L) + +/* + * Time comparison is subtle, as it's really truncated + * modular arithmetic. + */ + +#define IS_SOONER(a, b, reference) \ + (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference))) + +/* + * CATCHUP_INCREMENT, used when the function falls behind the counter. + * Could be an increasing function instead of a constant; + */ + +#define CATCHUP_INCREMENT 64 + +static int mips_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned long flags; + unsigned int mtflags; + unsigned long timestamp, reference, previous; + unsigned long nextcomp = 0L; + int vpe = current_cpu_data.vpe_id; + int cpu = smp_processor_id(); + local_irq_save(flags); + mtflags = dmt(); + + /* + * Maintain the per-TC virtual timer + * and program the per-VPE shared Count register + * as appropriate here... + */ + reference = (unsigned long)read_c0_count(); + timestamp = MAKEVALID(reference + delta); + /* + * To really model the clock, we have to catch the case + * where the current next-in-VPE timestamp is the old + * timestamp for the calling CPE, but the new value is + * in fact later. In that case, we have to do a full + * scan and discover the new next-in-VPE CPU id and + * timestamp. + */ + previous = smtc_nexttime[vpe][cpu]; + if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous) + && IS_SOONER(previous, timestamp, reference)) { + int i; + int soonest = cpu; + + /* + * Update timestamp array here, so that new + * value gets considered along with those of + * other virtual CPUs on the VPE. + */ + smtc_nexttime[vpe][cpu] = timestamp; + for_each_online_cpu(i) { + if (ISVALID(smtc_nexttime[vpe][i]) + && IS_SOONER(smtc_nexttime[vpe][i], + smtc_nexttime[vpe][soonest], reference)) { + soonest = i; + } + } + smtc_nextinvpe[vpe] = soonest; + nextcomp = smtc_nexttime[vpe][soonest]; + /* + * Otherwise, we don't have to process the whole array rank, + * we just have to see if the event horizon has gotten closer. + */ + } else { + if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) || + IS_SOONER(timestamp, + smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) { + smtc_nextinvpe[vpe] = cpu; + nextcomp = timestamp; + } + /* + * Since next-in-VPE may me the same as the executing + * virtual CPU, we update the array *after* checking + * its value. + */ + smtc_nexttime[vpe][cpu] = timestamp; + } + + /* + * It may be that, in fact, we don't need to update Compare, + * but if we do, we want to make sure we didn't fall into + * a crack just behind Count. + */ + if (ISVALID(nextcomp)) { + write_c0_compare(nextcomp); + ehb(); + /* + * We never return an error, we just make sure + * that we trigger the handlers as quickly as + * we can if we fell behind. + */ + while ((nextcomp - (unsigned long)read_c0_count()) + > (unsigned long)LONG_MAX) { + nextcomp += CATCHUP_INCREMENT; + write_c0_compare(nextcomp); + ehb(); + } + } + emt(mtflags); + local_irq_restore(flags); + return 0; +} + + +void smtc_distribute_timer(int vpe) +{ + unsigned long flags; + unsigned int mtflags; + int cpu; + struct clock_event_device *cd; + unsigned long nextstamp = 0L; + unsigned long reference; + + +repeat: + for_each_online_cpu(cpu) { + /* + * Find virtual CPUs within the current VPE who have + * unserviced timer requests whose time is now past. + */ + local_irq_save(flags); + mtflags = dmt(); + if (cpu_data[cpu].vpe_id == vpe && + ISVALID(smtc_nexttime[vpe][cpu])) { + reference = (unsigned long)read_c0_count(); + if ((smtc_nexttime[vpe][cpu] - reference) + > (unsigned long)LONG_MAX) { + smtc_nexttime[vpe][cpu] = 0L; + emt(mtflags); + local_irq_restore(flags); + /* + * We don't send IPIs to ourself. + */ + if (cpu != smp_processor_id()) { + smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0); + } else { + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); + } + } else { + /* Local to VPE but Valid Time not yet reached. */ + if (!ISVALID(nextstamp) || + IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp, + reference)) { + smtc_nextinvpe[vpe] = cpu; + nextstamp = smtc_nexttime[vpe][cpu]; + } + emt(mtflags); + local_irq_restore(flags); + } + } else { + emt(mtflags); + local_irq_restore(flags); + + } + } + /* Reprogram for interrupt at next soonest timestamp for VPE */ + if (ISVALID(nextstamp)) { + write_c0_compare(nextstamp); + ehb(); + if ((nextstamp - (unsigned long)read_c0_count()) + > (unsigned long)LONG_MAX) + goto repeat; + } +} + + +irqreturn_t c0_compare_interrupt(int irq, void *dev_id) +{ + int cpu = smp_processor_id(); + + /* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */ + handle_perf_irq(1); + + if (read_c0_cause() & (1 << 30)) { + /* Clear Count/Compare Interrupt */ + write_c0_compare(read_c0_compare()); + smtc_distribute_timer(cpu_data[cpu].vpe_id); + } + return IRQ_HANDLED; +} + + +int __cpuinit mips_clockevent_init(void) +{ + uint64_t mips_freq = mips_hpt_frequency; + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd; + unsigned int irq; + int i; + int j; + + if (!cpu_has_counter || !mips_hpt_frequency) + return -ENXIO; + if (cpu == 0) { + for (i = 0; i < num_possible_cpus(); i++) { + smtc_nextinvpe[i] = 0; + for (j = 0; j < num_possible_cpus(); j++) + smtc_nexttime[i][j] = 0L; + } + /* + * SMTC also can't have the usablility test + * run by secondary TCs once Compare is in use. + */ + if (!c0_compare_int_usable()) + return -ENXIO; + } + + /* + * With vectored interrupts things are getting platform specific. + * get_c0_compare_int is a hook to allow a platform to return the + * interrupt number of it's liking. + */ + irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; + if (get_c0_compare_int) + irq = get_c0_compare_int(); + + cd = &per_cpu(mips_clockevent_device, cpu); + + cd->name = "MIPS"; + cd->features = CLOCK_EVT_FEAT_ONESHOT; + + /* Calculate the min / max delta */ + cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32); + cd->shift = 32; + cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0x300, cd); + + cd->rating = 300; + cd->irq = irq; + cd->cpumask = cpumask_of_cpu(cpu); + cd->set_next_event = mips_next_event; + cd->set_mode = mips_set_clock_mode; + cd->event_handler = mips_event_handler; + + clockevents_register_device(cd); + + /* + * On SMTC we only want to do the data structure + * initialization and IRQ setup once. + */ + if (cpu) + return 0; + /* + * And we need the hwmask associated with the c0_compare + * vector to be initialized. + */ + irq_hwmask[irq] = (0x100 << cp0_compare_irq); + if (cp0_timer_irq_installed) + return 0; + + cp0_timer_irq_installed = 1; + + setup_irq(irq, &c0_compare_irqaction); + + return 0; +} diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 11c92dc53791..e621fda8ab37 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -54,14 +54,18 @@ extern void r4k_wait(void); * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes * using this version a gamble. */ -static void r4k_wait_irqoff(void) +void r4k_wait_irqoff(void) { local_irq_disable(); if (!need_resched()) - __asm__(" .set mips3 \n" + __asm__(" .set push \n" + " .set mips3 \n" " wait \n" - " .set mips0 \n"); + " .set pop \n"); local_irq_enable(); + __asm__(" .globl __pastwait \n" + "__pastwait: \n"); + return; } /* diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index f886dd7f708e..01dcbe38fa01 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -282,8 +282,8 @@ NESTED(except_vec_vi_handler, 0, sp) and t0, a0, t1 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP mfc0 t2, CP0_TCCONTEXT - or t0, t0, t2 - mtc0 t0, CP0_TCCONTEXT + or t2, t0, t2 + mtc0 t2, CP0_TCCONTEXT #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */ xor t1, t1, t0 mtc0 t1, CP0_STATUS diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 39b491b9ad87..897fb2b4751c 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -1,4 +1,21 @@ -/* Copyright (C) 2004 Mips Technologies, Inc */ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2004 Mips Technologies, Inc + * Copyright (C) 2008 Kevin D. Kissell + */ #include #include @@ -21,7 +38,6 @@ #include #include #include -#include #include /* @@ -58,11 +74,6 @@ unsigned long irq_hwmask[NR_IRQS]; asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; -/* - * Clock interrupt "latch" buffers, per "CPU" - */ - -static atomic_t ipi_timer_latch[NR_CPUS]; /* * Number of InterProcessor Interrupt (IPI) message buffers to allocate @@ -282,7 +293,7 @@ static void smtc_configure_tlb(void) * phys_cpu_present_map and the logical/physical mappings. */ -int __init mipsmt_build_cpu_map(int start_cpu_slot) +int __init smtc_build_cpu_map(int start_cpu_slot) { int i, ntcs; @@ -325,7 +336,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A); - write_tc_c0_tccontext(0); + /* + * TCContext gets an offset from the base of the IPIQ array + * to be used in low-level code to detect the presence of + * an active IPI queue + */ + write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16); /* Bind tc to vpe */ write_tc_c0_tcbind(vpe); /* In general, all TCs should have the same cpu_data indications */ @@ -336,10 +352,18 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) cpu_data[cpu].options &= ~MIPS_CPU_FPU; cpu_data[cpu].vpe_id = vpe; cpu_data[cpu].tc_id = tc; + /* Multi-core SMTC hasn't been tested, but be prepared */ + cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff; } +/* + * Tweak to get Count registes in as close a sync as possible. + * Value seems good for 34K-class cores. + */ + +#define CP0_SKEW 8 -void mipsmt_prepare_cpus(void) +void smtc_prepare_cpus(int cpus) { int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu; unsigned long flags; @@ -363,13 +387,13 @@ void mipsmt_prepare_cpus(void) IPIQ[i].head = IPIQ[i].tail = NULL; spin_lock_init(&IPIQ[i].lock); IPIQ[i].depth = 0; - atomic_set(&ipi_timer_latch[i], 0); } /* cpu_data index starts at zero */ cpu = 0; cpu_data[cpu].vpe_id = 0; cpu_data[cpu].tc_id = 0; + cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff; cpu++; /* Report on boot-time options */ @@ -484,7 +508,8 @@ void mipsmt_prepare_cpus(void) write_vpe_c0_compare(0); /* Propagate Config7 */ write_vpe_c0_config7(read_c0_config7()); - write_vpe_c0_count(read_c0_count()); + write_vpe_c0_count(read_c0_count() + CP0_SKEW); + ehb(); } /* enable multi-threading within VPE */ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE); @@ -585,24 +610,22 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) void smtc_init_secondary(void) { - /* - * Start timer on secondary VPEs if necessary. - * plat_timer_setup has already have been invoked by init/main - * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that - * SMTC init code assigns TCs consdecutively and in ascending order - * to across available VPEs. - */ - if (((read_c0_tcbind() & TCBIND_CURTC) != 0) && - ((read_c0_tcbind() & TCBIND_CURVPE) - != cpu_data[smp_processor_id() - 1].vpe_id)){ - write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); - } - local_irq_enable(); } void smtc_smp_finish(void) { + int cpu = smp_processor_id(); + + /* + * Lowest-numbered CPU per VPE starts a clock tick. + * Like per_cpu_trap_init() hack, this assumes that + * SMTC init code assigns TCs consdecutively and + * in ascending order across available VPEs. + */ + if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id)) + write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); + printk("TC %d going on-line as CPU %d\n", cpu_data[smp_processor_id()].tc_id, smp_processor_id()); } @@ -755,6 +778,8 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) struct smtc_ipi *pipi; unsigned long flags; int mtflags; + unsigned long tcrestart; + extern void r4k_wait_irqoff(void), __pastwait(void); if (cpu == smp_processor_id()) { printk("Cannot Send IPI to self!\n"); @@ -771,8 +796,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) pipi->arg = (void *)action; pipi->dest = cpu; if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { - if (type == SMTC_CLOCK_TICK) - atomic_inc(&ipi_timer_latch[cpu]); /* If not on same VPE, enqueue and send cross-VPE interrupt */ smtc_ipi_nq(&IPIQ[cpu], pipi); LOCK_CORE_PRA(); @@ -800,22 +823,29 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) if ((tcstatus & TCSTATUS_IXMT) != 0) { /* - * Spin-waiting here can deadlock, - * so we queue the message for the target TC. + * If we're in the the irq-off version of the wait + * loop, we need to force exit from the wait and + * do a direct post of the IPI. + */ + if (cpu_wait == r4k_wait_irqoff) { + tcrestart = read_tc_c0_tcrestart(); + if (tcrestart >= (unsigned long)r4k_wait_irqoff + && tcrestart < (unsigned long)__pastwait) { + write_tc_c0_tcrestart(__pastwait); + tcstatus &= ~TCSTATUS_IXMT; + write_tc_c0_tcstatus(tcstatus); + goto postdirect; + } + } + /* + * Otherwise we queue the message for the target TC + * to pick up when he does a local_irq_restore() */ write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); - /* Try to reduce redundant timer interrupt messages */ - if (type == SMTC_CLOCK_TICK) { - if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){ - smtc_ipi_nq(&freeIPIq, pipi); - return; - } - } smtc_ipi_nq(&IPIQ[cpu], pipi); } else { - if (type == SMTC_CLOCK_TICK) - atomic_inc(&ipi_timer_latch[cpu]); +postdirect: post_direct_ipi(cpu, pipi); write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); @@ -883,7 +913,7 @@ static void ipi_call_interrupt(void) smp_call_function_interrupt(); } -DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device); +DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); void ipi_decode(struct smtc_ipi *pipi) { @@ -891,20 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi) struct clock_event_device *cd; void *arg_copy = pipi->arg; int type_copy = pipi->type; - int ticks; - smtc_ipi_nq(&freeIPIq, pipi); switch (type_copy) { case SMTC_CLOCK_TICK: irq_enter(); kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++; - cd = &per_cpu(smtc_dummy_clockevent_device, cpu); - ticks = atomic_read(&ipi_timer_latch[cpu]); - atomic_sub(ticks, &ipi_timer_latch[cpu]); - while (ticks) { - cd->event_handler(cd); - ticks--; - } + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); irq_exit(); break; @@ -937,24 +960,48 @@ void ipi_decode(struct smtc_ipi *pipi) } } +/* + * Similar to smtc_ipi_replay(), but invoked from context restore, + * so it reuses the current exception frame rather than set up a + * new one with self_ipi. + */ + void deferred_smtc_ipi(void) { - struct smtc_ipi *pipi; - unsigned long flags; -/* DEBUG */ - int q = smp_processor_id(); + int cpu = smp_processor_id(); /* * Test is not atomic, but much faster than a dequeue, * and the vast majority of invocations will have a null queue. + * If irq_disabled when this was called, then any IPIs queued + * after we test last will be taken on the next irq_enable/restore. + * If interrupts were enabled, then any IPIs added after the + * last test will be taken directly. */ - if (IPIQ[q].head != NULL) { - while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) { - /* ipi_decode() should be called with interrupts off */ - local_irq_save(flags); + + while (IPIQ[cpu].head != NULL) { + struct smtc_ipi_q *q = &IPIQ[cpu]; + struct smtc_ipi *pipi; + unsigned long flags; + + /* + * It may be possible we'll come in with interrupts + * already enabled. + */ + local_irq_save(flags); + + spin_lock(&q->lock); + pipi = __smtc_ipi_dq(q); + spin_unlock(&q->lock); + if (pipi != NULL) ipi_decode(pipi); - local_irq_restore(flags); - } + /* + * The use of the __raw_local restore isn't + * as obviously necessary here as in smtc_ipi_replay(), + * but it's more efficient, given that we're already + * running down the IPI queue. + */ + __raw_local_irq_restore(flags); } } @@ -1066,55 +1113,53 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe) /* * SMTC-specific hacks invoked from elsewhere in the kernel. - * - * smtc_ipi_replay is called from raw_local_irq_restore which is only ever - * called with interrupts disabled. We do rely on interrupts being disabled - * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would - * result in a recursive call to raw_local_irq_restore(). */ -static void __smtc_ipi_replay(void) + /* + * smtc_ipi_replay is called from raw_local_irq_restore + */ + +void smtc_ipi_replay(void) { unsigned int cpu = smp_processor_id(); /* * To the extent that we've ever turned interrupts off, * we may have accumulated deferred IPIs. This is subtle. - * If we use the smtc_ipi_qdepth() macro, we'll get an - * exact number - but we'll also disable interrupts - * and create a window of failure where a new IPI gets - * queued after we test the depth but before we re-enable - * interrupts. So long as IXMT never gets set, however, * we should be OK: If we pick up something and dispatch * it here, that's great. If we see nothing, but concurrent * with this operation, another TC sends us an IPI, IXMT * is clear, and we'll handle it as a real pseudo-interrupt - * and not a pseudo-pseudo interrupt. + * and not a pseudo-pseudo interrupt. The important thing + * is to do the last check for queued message *after* the + * re-enabling of interrupts. */ - if (IPIQ[cpu].depth > 0) { - while (1) { - struct smtc_ipi_q *q = &IPIQ[cpu]; - struct smtc_ipi *pipi; - extern void self_ipi(struct smtc_ipi *); - - spin_lock(&q->lock); - pipi = __smtc_ipi_dq(q); - spin_unlock(&q->lock); - if (!pipi) - break; + while (IPIQ[cpu].head != NULL) { + struct smtc_ipi_q *q = &IPIQ[cpu]; + struct smtc_ipi *pipi; + unsigned long flags; + /* + * It's just possible we'll come in with interrupts + * already enabled. + */ + local_irq_save(flags); + + spin_lock(&q->lock); + pipi = __smtc_ipi_dq(q); + spin_unlock(&q->lock); + /* + ** But use a raw restore here to avoid recursion. + */ + __raw_local_irq_restore(flags); + + if (pipi) { self_ipi(pipi); smtc_cpu_stats[cpu].selfipis++; } } } -void smtc_ipi_replay(void) -{ - raw_local_irq_disable(); - __smtc_ipi_replay(); -} - EXPORT_SYMBOL(smtc_ipi_replay); void smtc_idle_loop_hook(void) @@ -1193,40 +1238,13 @@ void smtc_idle_loop_hook(void) } } - /* - * Now that we limit outstanding timer IPIs, check for hung TC - */ - for (tc = 0; tc < NR_CPUS; tc++) { - /* Don't check ourself - we'll dequeue IPIs just below */ - if ((tc != smp_processor_id()) && - atomic_read(&ipi_timer_latch[tc]) > timerq_limit) { - if (clock_hang_reported[tc] == 0) { - pdb_msg += sprintf(pdb_msg, - "TC %d looks hung with timer latch at %d\n", - tc, atomic_read(&ipi_timer_latch[tc])); - clock_hang_reported[tc]++; - } - } - } emt(mtflags); local_irq_restore(flags); if (pdb_msg != &id_ho_db_msg[0]) printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg); #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */ - /* - * Replay any accumulated deferred IPIs. If "Instant Replay" - * is in use, there should never be any. - */ -#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY - { - unsigned long flags; - - local_irq_save(flags); - __smtc_ipi_replay(); - local_irq_restore(flags); - } -#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */ + smtc_ipi_replay(); } void smtc_soft_dump(void) @@ -1242,10 +1260,6 @@ void smtc_soft_dump(void) printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis); } smtc_ipi_qdump(); - printk("Timer IPI Backlogs:\n"); - for (i=0; i < NR_CPUS; i++) { - printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i])); - } printk("%d Recoveries of \"stolen\" FPU\n", atomic_read(&smtc_fpu_recoveries)); } diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c index 5ea705e49454..f84a46a8ae6e 100644 --- a/arch/mips/mti-malta/malta-smtc.c +++ b/arch/mips/mti-malta/malta-smtc.c @@ -84,12 +84,17 @@ static void msmtc_cpus_done(void) static void __init msmtc_smp_setup(void) { - mipsmt_build_cpu_map(0); + /* + * we won't get the definitive value until + * we've run smtc_prepare_cpus later, but + * we would appear to need an upper bound now. + */ + smp_num_siblings = smtc_build_cpu_map(0); } static void __init msmtc_prepare_cpus(unsigned int max_cpus) { - mipsmt_prepare_cpus(); + smtc_prepare_cpus(max_cpus); } struct plat_smp_ops msmtc_smp_ops = { diff --git a/include/asm-mips/cevt-r4k.h b/include/asm-mips/cevt-r4k.h new file mode 100644 index 000000000000..fa4328f9124f --- /dev/null +++ b/include/asm-mips/cevt-r4k.h @@ -0,0 +1,46 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Kevin D. Kissell + */ + +/* + * Definitions used for common event timer implementation + * for MIPS 4K-type processors and their MIPS MT variants. + * Avoids unsightly extern declarations in C files. + */ +#ifndef __ASM_CEVT_R4K_H +#define __ASM_CEVT_R4K_H + +DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); + +void mips_event_handler(struct clock_event_device *dev); +int c0_compare_int_usable(void); +void mips_set_clock_mode(enum clock_event_mode, struct clock_event_device *); +irqreturn_t c0_compare_interrupt(int, void *); + +extern struct irqaction c0_compare_irqaction; +extern int cp0_timer_irq_installed; + +/* + * Possibly handle a performance counter interrupt. + * Return true if the timer interrupt should not be checked + */ + +static inline int handle_perf_irq(int r2) +{ + /* + * The performance counter overflow interrupt may be shared with the + * timer interrupt (cp0_perfcount_irq < 0). If it is and a + * performance counter has overflowed (perf_irq() == IRQ_HANDLED) + * and we can't reliably determine if a counter interrupt has also + * happened (!r2) then don't check for a timer interrupt. + */ + return (cp0_perfcount_irq < 0) && + perf_irq() == IRQ_HANDLED && + !r2; +} + +#endif /* __ASM_CEVT_R4K_H */ diff --git a/include/asm-mips/irqflags.h b/include/asm-mips/irqflags.h index 881e8866501d..701ec0ba8fa9 100644 --- a/include/asm-mips/irqflags.h +++ b/include/asm-mips/irqflags.h @@ -38,8 +38,17 @@ __asm__( " .set pop \n" " .endm"); +extern void smtc_ipi_replay(void); + static inline void raw_local_irq_enable(void) { +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC kernel needs to do a software replay of queued + * IPIs, at the cost of call overhead on each local_irq_enable() + */ + smtc_ipi_replay(); +#endif __asm__ __volatile__( "raw_local_irq_enable" : /* no outputs */ @@ -47,6 +56,7 @@ static inline void raw_local_irq_enable(void) : "memory"); } + /* * For cli() we have to insert nops to make sure that the new value * has actually arrived in the status register before the end of this @@ -185,15 +195,14 @@ __asm__( " .set pop \n" " .endm \n"); -extern void smtc_ipi_replay(void); static inline void raw_local_irq_restore(unsigned long flags) { unsigned long __tmp1; -#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY +#ifdef CONFIG_MIPS_MT_SMTC /* - * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred + * SMTC kernel needs to do a software replay of queued * IPIs, at the cost of branch and call overhead on each * local_irq_restore() */ @@ -208,6 +217,17 @@ static inline void raw_local_irq_restore(unsigned long flags) : "memory"); } +static inline void __raw_local_irq_restore(unsigned long flags) +{ + unsigned long __tmp1; + + __asm__ __volatile__( + "raw_local_irq_restore\t%0" + : "=r" (__tmp1) + : "0" (flags) + : "memory"); +} + static inline int raw_irqs_disabled_flags(unsigned long flags) { #ifdef CONFIG_MIPS_MT_SMTC diff --git a/include/asm-mips/smtc.h b/include/asm-mips/smtc.h index 3639b28f80db..ea60bf08dcb0 100644 --- a/include/asm-mips/smtc.h +++ b/include/asm-mips/smtc.h @@ -6,6 +6,7 @@ */ #include +#include /* * System-wide SMTC status information @@ -38,14 +39,15 @@ struct mm_struct; struct task_struct; void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu); - +void self_ipi(struct smtc_ipi *); void smtc_flush_tlb_asid(unsigned long asid); -extern int mipsmt_build_cpu_map(int startslot); -extern void mipsmt_prepare_cpus(void); +extern int smtc_build_cpu_map(int startslot); +extern void smtc_prepare_cpus(int cpus); extern void smtc_smp_finish(void); extern void smtc_boot_secondary(int cpu, struct task_struct *t); extern void smtc_cpus_done(void); + /* * Sharing the TLB between multiple VPEs means that the * "random" index selection function is not allowed to -- cgit v1.2.2 From d3d238c7744d08c36a114a59cb537d4c0c6c9a86 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 3 Oct 2008 21:54:59 +0200 Subject: [S390] nohz: Fix __udelay. This fixes a regression that came with 934b2857cc576ae53c92a66e63fce7ddcfa74691 ("[S390] nohz/sclp: disable timer on synchronous waits."). If udelay() gets called from a disabled context it sets the clock comparator to a value where it expects the next interrupt. When the interrupt happens the clock comparator gets not reset and therefore the interrupt condition doesn't get cleared. The result is an endless timer interrupt loop. In addition this patch fixes also the following: rcutorture reveals that our __udelay implementation is still buggy, since it might schedule tasklets, but prevents their execution: NOHZ: local_softirq_pending 42 NOHZ: local_softirq_pending 02 NOHZ: local_softirq_pending 142 NOHZ: local_softirq_pending 02 To fix this we make sure that only the clock comparator interrupt is enabled when the enabled wait psw is loaded. Also no code gets called anymore which might schedule tasklets. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/time.c | 2 ++ arch/s390/lib/delay.c | 88 ++++++++++++++++++++++++++++++------------------- 2 files changed, 56 insertions(+), 34 deletions(-) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index ca114fe46ffb..06acb1a18bbc 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -169,6 +169,8 @@ void init_cpu_timer(void) static void clock_comparator_interrupt(__u16 code) { + if (S390_lowcore.clock_comparator == -1ULL) + set_clock_comparator(S390_lowcore.clock_comparator); } static void etr_timing_alert(struct etr_irq_parm *); diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index fc6ab6094df8..0953cee05efc 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -1,14 +1,9 @@ /* - * arch/s390/lib/delay.c * Precise Delay Loops for S390 * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * - * Derived from "arch/i386/lib/delay.c" - * Copyright (C) 1993 Linus Torvalds - * Copyright (C) 1997 Martin Mares + * Copyright IBM Corp. 1999,2008 + * Author(s): Martin Schwidefsky , + * Heiko Carstens , */ #include @@ -29,30 +24,31 @@ void __delay(unsigned long loops) asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1)); } -/* - * Waits for 'usecs' microseconds using the TOD clock comparator. - */ -void __udelay(unsigned long usecs) +static void __udelay_disabled(unsigned long usecs) { - u64 end, time, old_cc = 0; - unsigned long flags, cr0, mask, dummy; - int irq_context; + unsigned long mask, cr0, cr0_saved; + u64 clock_saved; - irq_context = in_interrupt(); - if (!irq_context) - local_bh_disable(); - local_irq_save(flags); - if (raw_irqs_disabled_flags(flags)) { - old_cc = local_tick_disable(); - S390_lowcore.clock_comparator = -1ULL; - __ctl_store(cr0, 0, 0); - dummy = (cr0 & 0xffff00e0) | 0x00000800; - __ctl_load(dummy , 0, 0); - mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT; - } else - mask = psw_kernel_bits | PSW_MASK_WAIT | - PSW_MASK_EXT | PSW_MASK_IO; + clock_saved = local_tick_disable(); + set_clock_comparator(get_clock() + ((u64) usecs << 12)); + __ctl_store(cr0_saved, 0, 0); + cr0 = (cr0_saved & 0xffff00e0) | 0x00000800; + __ctl_load(cr0 , 0, 0); + mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT; + trace_hardirqs_on(); + __load_psw_mask(mask); + local_irq_disable(); + __ctl_load(cr0_saved, 0, 0); + local_tick_enable(clock_saved); + set_clock_comparator(S390_lowcore.clock_comparator); +} +static void __udelay_enabled(unsigned long usecs) +{ + unsigned long mask; + u64 end, time; + + mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT | PSW_MASK_IO; end = get_clock() + ((u64) usecs << 12); do { time = end < S390_lowcore.clock_comparator ? @@ -62,13 +58,37 @@ void __udelay(unsigned long usecs) __load_psw_mask(mask); local_irq_disable(); } while (get_clock() < end); + set_clock_comparator(S390_lowcore.clock_comparator); +} - if (raw_irqs_disabled_flags(flags)) { - __ctl_load(cr0, 0, 0); - local_tick_enable(old_cc); +/* + * Waits for 'usecs' microseconds using the TOD clock comparator. + */ +void __udelay(unsigned long usecs) +{ + unsigned long flags; + + preempt_disable(); + local_irq_save(flags); + if (in_irq()) { + __udelay_disabled(usecs); + goto out; + } + if (in_softirq()) { + if (raw_irqs_disabled_flags(flags)) + __udelay_disabled(usecs); + else + __udelay_enabled(usecs); + goto out; } - if (!irq_context) + if (raw_irqs_disabled_flags(flags)) { + local_bh_disable(); + __udelay_disabled(usecs); _local_bh_enable(); - set_clock_comparator(S390_lowcore.clock_comparator); + goto out; + } + __udelay_enabled(usecs); +out: local_irq_restore(flags); + preempt_enable(); } -- cgit v1.2.2 From 75f6276187e5ce5a312a0619fba2fe56c9290b48 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Fri, 3 Oct 2008 21:55:00 +0200 Subject: [S390] qdio: prevent stack clobber Don't print more information than fits into the string on the stack. Combine the informational output of qdio to fit into one line. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_setup.c | 55 ++++++++++++++++--------------------------- 1 file changed, 20 insertions(+), 35 deletions(-) diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index 1679e2f91c94..a0b6b46e7466 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -447,51 +447,36 @@ void qdio_print_subchannel_info(struct qdio_irq *irq_ptr, { char s[80]; - sprintf(s, "%s sc:%x ", cdev->dev.bus_id, irq_ptr->schid.sch_no); - + sprintf(s, "qdio: %s ", dev_name(&cdev->dev)); switch (irq_ptr->qib.qfmt) { case QDIO_QETH_QFMT: - sprintf(s + strlen(s), "OSADE "); + sprintf(s + strlen(s), "OSA "); break; case QDIO_ZFCP_QFMT: sprintf(s + strlen(s), "ZFCP "); break; case QDIO_IQDIO_QFMT: - sprintf(s + strlen(s), "HiperSockets "); + sprintf(s + strlen(s), "HS "); break; } - sprintf(s + strlen(s), "using: "); - - if (!is_thinint_irq(irq_ptr)) - sprintf(s + strlen(s), "no"); - sprintf(s + strlen(s), "AdapterInterrupts "); - if (!(irq_ptr->sch_token != 0)) - sprintf(s + strlen(s), "no"); - sprintf(s + strlen(s), "QEBSM "); - if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED)) - sprintf(s + strlen(s), "no"); - sprintf(s + strlen(s), "OutboundPCI "); - if (!css_general_characteristics.aif_tdd) - sprintf(s + strlen(s), "no"); - sprintf(s + strlen(s), "TDD\n"); - printk(KERN_INFO "qdio: %s", s); - - memset(s, 0, sizeof(s)); - sprintf(s, "%s SIGA required: ", cdev->dev.bus_id); - if (irq_ptr->siga_flag.input) - sprintf(s + strlen(s), "Read "); - if (irq_ptr->siga_flag.output) - sprintf(s + strlen(s), "Write "); - if (irq_ptr->siga_flag.sync) - sprintf(s + strlen(s), "Sync "); - if (!irq_ptr->siga_flag.no_sync_ti) - sprintf(s + strlen(s), "SyncAI "); - if (!irq_ptr->siga_flag.no_sync_out_ti) - sprintf(s + strlen(s), "SyncOutAI "); - if (!irq_ptr->siga_flag.no_sync_out_pci) - sprintf(s + strlen(s), "SyncOutPCI"); + sprintf(s + strlen(s), "on SC %x using ", irq_ptr->schid.sch_no); + sprintf(s + strlen(s), "AI:%d ", is_thinint_irq(irq_ptr)); + sprintf(s + strlen(s), "QEBSM:%d ", (irq_ptr->sch_token) ? 1 : 0); + sprintf(s + strlen(s), "PCI:%d ", + (irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED) ? 1 : 0); + sprintf(s + strlen(s), "TDD:%d ", css_general_characteristics.aif_tdd); + sprintf(s + strlen(s), "SIGA:"); + sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.input) ? "R" : " "); + sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.output) ? "W" : " "); + sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.sync) ? "S" : " "); + sprintf(s + strlen(s), "%s", + (!irq_ptr->siga_flag.no_sync_ti) ? "A" : " "); + sprintf(s + strlen(s), "%s", + (!irq_ptr->siga_flag.no_sync_out_ti) ? "O" : " "); + sprintf(s + strlen(s), "%s", + (!irq_ptr->siga_flag.no_sync_out_pci) ? "P" : " "); sprintf(s + strlen(s), "\n"); - printk(KERN_INFO "qdio: %s", s); + printk(KERN_INFO "%s", s); } int __init qdio_setup_init(void) -- cgit v1.2.2 From 96d746c68fae9a1e3167caab04c22fd0f677f62d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 3 Oct 2008 13:38:07 -0700 Subject: Fix init/main.c to use regular printk with '%pF' for initcall fn .. small detail, but the silly e1000e initcall warning debugging caused me to look at this code. Rather than gouge my eyes out with a spoon, I just fixed it. Signed-off-by: Linus Torvalds --- init/main.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/init/main.c b/init/main.c index f6f7042331dc..3820323c4c84 100644 --- a/init/main.c +++ b/init/main.c @@ -708,7 +708,7 @@ int do_one_initcall(initcall_t fn) int result; if (initcall_debug) { - print_fn_descriptor_symbol("calling %s\n", fn); + printk("calling %pF\n", fn); t0 = ktime_get(); } @@ -718,8 +718,8 @@ int do_one_initcall(initcall_t fn) t1 = ktime_get(); delta = ktime_sub(t1, t0); - print_fn_descriptor_symbol("initcall %s", fn); - printk(" returned %d after %Ld msecs\n", result, + printk("initcall %pF returned %d after %Ld msecs\n", + fn, result, (unsigned long long) delta.tv64 >> 20); } @@ -737,8 +737,7 @@ int do_one_initcall(initcall_t fn) local_irq_enable(); } if (msgbuf[0]) { - print_fn_descriptor_symbol(KERN_WARNING "initcall %s", fn); - printk(" returned with %s\n", msgbuf); + printk("initcall %pF returned with %s\n", fn, msgbuf); } return result; -- cgit v1.2.2 From cc65f1ec192dc54de57483194502e9fa00934c39 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 3 Oct 2008 13:00:56 -0700 Subject: x86 setup: correct segfault in generation of 32-bit reloc kernel Impact: segfault on build of a 32-bit relocatable kernel When converting arch/x86/boot/compressed/relocs.c to support unlimited sections, the computation of sym_strtab in walk_relocs() was done incorrectly. This causes a segfault for some people when building the relocatable 32-bit kernel. Pointed out by Anonymous . Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/relocs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c index a1310c52fc0c..857e492c571e 100644 --- a/arch/x86/boot/compressed/relocs.c +++ b/arch/x86/boot/compressed/relocs.c @@ -492,7 +492,7 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym)) continue; } sh_symtab = sec_symtab->symtab; - sym_strtab = sec->link->strtab; + sym_strtab = sec_symtab->link->strtab; for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) { Elf32_Rel *rel; Elf32_Sym *sym; -- cgit v1.2.2 From 3040a6d5a2655c7967bd42b5fb4903d48daa747f Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Fri, 3 Oct 2008 10:51:15 -0400 Subject: selinux: Fix an uninitialized variable BUG/panic in selinux_secattr_to_sid() At some point during the 2.6.27 development cycle two new fields were added to the SELinux context structure, a string pointer and a length field. The code in selinux_secattr_to_sid() was not modified and as a result these two fields were left uninitialized which could result in erratic behavior, including kernel panics, when NetLabel is used. This patch fixes the problem by fully initializing the context in selinux_secattr_to_sid() before use and reducing the level of direct context manipulation done to help prevent future problems. Please apply this to the 2.6.27-rcX release stream. Signed-off-by: Paul Moore Signed-off-by: James Morris --- security/selinux/ss/services.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index d11a8154500f..8551952ef329 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -2737,6 +2737,7 @@ int security_netlbl_secattr_to_sid(struct netlbl_lsm_secattr *secattr, if (ctx == NULL) goto netlbl_secattr_to_sid_return; + context_init(&ctx_new); ctx_new.user = ctx->user; ctx_new.role = ctx->role; ctx_new.type = ctx->type; @@ -2745,13 +2746,9 @@ int security_netlbl_secattr_to_sid(struct netlbl_lsm_secattr *secattr, if (ebitmap_netlbl_import(&ctx_new.range.level[0].cat, secattr->attr.mls.cat) != 0) goto netlbl_secattr_to_sid_return; - ctx_new.range.level[1].cat.highbit = - ctx_new.range.level[0].cat.highbit; - ctx_new.range.level[1].cat.node = - ctx_new.range.level[0].cat.node; - } else { - ebitmap_init(&ctx_new.range.level[0].cat); - ebitmap_init(&ctx_new.range.level[1].cat); + memcpy(&ctx_new.range.level[1].cat, + &ctx_new.range.level[0].cat, + sizeof(ctx_new.range.level[0].cat)); } if (mls_context_isvalid(&policydb, &ctx_new) != 1) goto netlbl_secattr_to_sid_return_cleanup; -- cgit v1.2.2 From 2e4a75cdcb89ff53bb182dda3a6dcdc14befe007 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Fri, 3 Oct 2008 15:23:36 -0700 Subject: rtc: fix kernel panic on second use of SIGIO nofitication When userspace uses SIGIO notification and forgets to disable it before closing file descriptor, rtc->async_queue contains stale pointer to struct file. When user space enables again SIGIO notification in different process, kernel dereferences this (poisoned) pointer and crashes. So disable SIGIO notification on close. Kernel panic: (second run of qemu (requires echo 1024 > /sys/class/rtc/rtc0/max_user_freq)) general protection fault: 0000 [1] PREEMPT CPU 0 Modules linked in: af_packet snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq usbhid tuner tea5767 tda8290 tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tda9875 uhci_hcd ehci_hcd usbcore bttv snd_via82xx snd_ac97_codec ac97_bus snd_pcm snd_timer ir_common compat_ioctl32 snd_page_alloc videodev v4l1_compat snd_mpu401_uart snd_rawmidi v4l2_common videobuf_dma_sg videobuf_core snd_seq_device snd btcx_risc soundcore tveeprom i2c_viapro Pid: 5781, comm: qemu-system-x86 Not tainted 2.6.27-rc6 #363 RIP: 0010:[] [] __lock_acquire+0x3db/0x73f RSP: 0000:ffffffff80674cb8 EFLAGS: 00010002 RAX: ffff8800224c62f0 RBX: 0000000000000046 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800224c62f0 RBP: ffffffff80674d08 R08: 0000000000000002 R09: 0000000000000001 R10: ffffffff80238941 R11: 0000000000000001 R12: 0000000000000000 R13: 6b6b6b6b6b6b6b6b R14: ffff88003a450080 R15: 0000000000000000 FS: 00007f98b69516f0(0000) GS:ffffffff80623200(0000) knlGS:00000000f7cc86d0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000a87000 CR3: 0000000022598000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qemu-system-x86 (pid: 5781, threadinfo ffff880028812000, task ffff88003a450080) Stack: ffffffff80674cf8 0000000180238440 0000000200000002 0000000000000000 ffff8800224c62f0 0000000000000046 0000000000000000 0000000000000002 0000000000000002 0000000000000000 ffffffff80674d68 ffffffff8024fc7a Call Trace: [] lock_acquire+0x85/0xa9 [] ? send_sigio+0x2a/0x184 [] _read_lock+0x3e/0x4a [] ? send_sigio+0x2a/0x184 [] send_sigio+0x2a/0x184 [] ? __lock_acquire+0x6e1/0x73f [] ? kill_fasync+0x2c/0x4e [] __kill_fasync+0x54/0x65 [] kill_fasync+0x3a/0x4e [] rtc_update_irq+0x9c/0xa5 [] cmos_interrupt+0xae/0xc0 [] handle_IRQ_event+0x25/0x5a [] handle_edge_irq+0xdd/0x123 [] do_IRQ+0xe4/0x144 [] ret_from_intr+0x0/0xf [] ? __alloc_pages_internal+0xe7/0x3ad [] ? clear_page_c+0x7/0x10 [] ? get_page_from_freelist+0x385/0x450 [] ? __alloc_pages_internal+0xe7/0x3ad [] ? anon_vma_prepare+0x2e/0xf6 [] ? handle_mm_fault+0x227/0x6a5 [] ? do_page_fault+0x494/0x83f [] ? error_exit+0x0/0xa9 Code: cc 41 39 45 28 74 24 e8 5e 1d 0f 00 85 c0 0f 84 6a 03 00 00 83 3d 8f a9 aa 00 00 be 47 03 00 00 0f 84 6a 02 00 00 e9 53 03 00 00 <41> ff 85 38 01 00 00 45 8b be 90 06 00 00 41 83 ff 2f 76 24 e8 RIP [] __lock_acquire+0x3db/0x73f RSP ---[ end trace 431877d860448760 ]--- Kernel panic - not syncing: Aiee, killing interrupt handler! Signed-off-by: Marcin Slusarz Acked-by: Alessandro Zummo Acked-by: David Brownell Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-dev.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index f118252f3a9f..52e2743b04ec 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -422,6 +422,12 @@ done: return err; } +static int rtc_dev_fasync(int fd, struct file *file, int on) +{ + struct rtc_device *rtc = file->private_data; + return fasync_helper(fd, file, on, &rtc->async_queue); +} + static int rtc_dev_release(struct inode *inode, struct file *file) { struct rtc_device *rtc = file->private_data; @@ -434,16 +440,13 @@ static int rtc_dev_release(struct inode *inode, struct file *file) if (rtc->ops->release) rtc->ops->release(rtc->dev.parent); + if (file->f_flags & FASYNC) + rtc_dev_fasync(-1, file, 0); + clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags); return 0; } -static int rtc_dev_fasync(int fd, struct file *file, int on) -{ - struct rtc_device *rtc = file->private_data; - return fasync_helper(fd, file, on, &rtc->async_queue); -} - static const struct file_operations rtc_dev_fops = { .owner = THIS_MODULE, .llseek = no_llseek, -- cgit v1.2.2 From aef7db4bd5a3b6068dfa05919a3d685199eed116 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 3 Oct 2008 15:23:38 -0700 Subject: fbdev: fix recursive notifier and locking when fbdev console is blanked Fix infinite recursive notifier in the fbdev layer. This causes recursive locking. Dmitry Baryshkov found the problem and confirmed that the patch fixes the bug. After doing # echo 1 > /sys/class/graphics/fb0/blank I got the following in my kernel log: ============================================= [ INFO: possible recursive locking detected ] 2.6.27-rc6-00086-gda63874-dirty #97 --------------------------------------------- echo/1564 is trying to acquire lock: ((fb_notifier_list).rwsem){..--}, at: [] __blocking_notifier_call_chain+0x38/0x6c but task is already holding lock: ((fb_notifier_list).rwsem){..--}, at: [] __blocking_notifier_call_chain+0x38/0x6c other info that might help us debug this: 2 locks held by echo/1564: #0: (&buffer->mutex){--..}, at: [] sysfs_write_file+0x30/0x80 #1: ((fb_notifier_list).rwsem){..--}, at: [] __blocking_notifier_call_chain+0x38/0x6c stack backtrace: [] (dump_stack+0x0/0x14) from [] (print_deadlock_bug+0xa4/0xd0) [] (print_deadlock_bug+0x0/0xd0) from [] (check_deadlock+0x148/0x17c) r6:c397a1e0 r5:c397a530 r4:c04fcf98 [] (check_deadlock+0x0/0x17c) from [] (validate_chain+0x3c4/0x4f0) [] (validate_chain+0x0/0x4f0) from [] (__lock_acquire+0x5e8/0x6b4) [] (__lock_acquire+0x0/0x6b4) from [] (lock_acquire+0x64/0x78) [] (lock_acquire+0x0/0x78) from [] (down_read+0x4c/0x60) r7:00000009 r6:ffffffff r5:c0427a40 r4:c005a384 [] (down_read+0x0/0x60) from [] (__blocking_notifier_call_chain+0x38/0x6c) r5:c0427a40 r4:c0427a74 [] (__blocking_notifier_call_chain+0x0/0x6c) from [] (blocking_notifier_call_chain+0x20/0x28) r8:00000009 r7:c086d640 r6:c3967940 r5:00000000 r4:c38984b8 [] (blocking_notifier_call_chain+0x0/0x28) from [] (fb_notifier_call_chain+0x1c/0x24) [] (fb_notifier_call_chain+0x0/0x24) from [] (fb_blank+0x64/0x70) [] (fb_blank+0x0/0x70) from [] (fbcon_blank+0x114/0x1bc) r5:00000001 r4:c38984b8 [] (fbcon_blank+0x0/0x1bc) from [] (do_blank_screen+0x1e0/0x2a0) [] (do_blank_screen+0x0/0x2a0) from [] (fbcon_fb_blanked+0x74/0x94) r5:c3967940 r4:00000001 [] (fbcon_fb_blanked+0x0/0x94) from [] (fbcon_event_notify+0x100/0x12c) r5:fffffffe r4:c39bc194 [] (fbcon_event_notify+0x0/0x12c) from [] (notifier_call_chain+0x38/0x7c) [] (notifier_call_chain+0x0/0x7c) from [] (__blocking_notifier_call_chain+0x54/0x6c) r8:c3b51ea0 r7:00000009 r6:ffffffff r5:c0427a40 r4:c0427a74 [] (__blocking_notifier_call_chain+0x0/0x6c) from [] (blocking_notifier_call_chain+0x20/0x28) r8:00000001 r7:c3a7e000 r6:00000000 r5:00000000 r4:c38984b8 [] (blocking_notifier_call_chain+0x0/0x28) from [] (fb_notifier_call_chain+0x1c/0x24) [] (fb_notifier_call_chain+0x0/0x24) from [] (fb_blank+0x64/0x70) [] (fb_blank+0x0/0x70) from [] (store_blank+0x54/0x7c) r5:c38984b8 r4:c3b51ec4 [] (store_blank+0x0/0x7c) from [] (dev_attr_store+0x28/0x2c) r8:00000001 r7:c042bf80 r6:c39eba10 r5:c3967c30 r4:c38e0140 [] (dev_attr_store+0x0/0x2c) from [] (flush_write_buffer+0x54/0x68) [] (flush_write_buffer+0x0/0x68) from [] (sysfs_write_file+0x58/0x80) r8:c3b51f78 r7:c3bcb070 r6:c39eba10 r5:00000001 r4:00000001 [] (sysfs_write_file+0x0/0x80) from [] (vfs_write+0xb8/0x148) [] (vfs_write+0x0/0x148) from [] (sys_write+0x44/0x70) r7:00000004 r6:c3bcb070 r5:00000000 r4:00000000 [] (sys_write+0x0/0x70) from [] (ret_fast_syscall+0x0/0x2c) r6:4001b000 r5:00000001 r4:401dc658 Signed-off-by: Krzysztof Helt Reported-by: Dmitry Baryshkov Testted-by: Dmitry Baryshkov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/console/fbcon.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index c6299e8a041d..9cbff84b787d 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2400,11 +2400,15 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) if (!fbcon_is_inactive(vc, info)) { if (ops->blank_state != blank) { + int ret = 1; + ops->blank_state = blank; fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW); ops->cursor_flash = (!blank); - if (fb_blank(info, blank)) + if (info->fbops->fb_blank) + ret = info->fbops->fb_blank(blank, info); + if (ret) fbcon_generic_blank(vc, info, blank); } -- cgit v1.2.2 From f2fe1638f624467ae583b1a41a01804405f29eee Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 3 Oct 2008 15:23:39 -0700 Subject: orion_spi: fix handling of default transfer speed Accept zero (the default!) as a per-transfer clock speed override. Signed-off-by: Lennert Buytenhek Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/orion_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c index c4eaacd6e553..b872bfaf4bd2 100644 --- a/drivers/spi/orion_spi.c +++ b/drivers/spi/orion_spi.c @@ -427,7 +427,7 @@ static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) goto msg_rejected; } - if (t->speed_hz < orion_spi->min_speed) { + if (t->speed_hz && t->speed_hz < orion_spi->min_speed) { dev_err(&spi->dev, "message rejected : " "device min speed (%d Hz) exceeds " -- cgit v1.2.2 From 897312bd240357c88ce906633703c324c6f0a5cd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 3 Oct 2008 15:23:41 -0700 Subject: include/linux/stacktrace.h: declare struct task_struct include/linux/stacktrace.h:13: warning: 'struct task_struct' declared inside parameter list (This might be a hard error on sparc64, which uses this header and has -Werror) Reported-by: "Randy.Dunlap" Acked-by: Ingo Molnar Cc: Peter Zijlstra Cc: Arjan van de Ven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/stacktrace.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/stacktrace.h b/include/linux/stacktrace.h index 5da9794b2d78..b106fd8e0d5c 100644 --- a/include/linux/stacktrace.h +++ b/include/linux/stacktrace.h @@ -1,6 +1,8 @@ #ifndef __LINUX_STACKTRACE_H #define __LINUX_STACKTRACE_H +struct task_struct; + #ifdef CONFIG_STACKTRACE struct stack_trace { unsigned int nr_entries, max_entries; -- cgit v1.2.2 From c222817f6add85197790e0071f6e511eff14ba25 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Fri, 3 Oct 2008 15:23:42 -0700 Subject: cpusets: remove pj from cpuset maintainers Remove myself from the kernel MAINTAINERS file for cpusets. I am leaving SGI and probably will not be active in Linux kernel work. I can be reached at . Contact Derek Fults for future SGI+cpuset related issues. I'm off to the next chapter of this good life. Signed-off-by: Paul Jackson Cc: Paul Menage Cc: Derek Fults Cc: John Hesterberg Cc: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 -- 1 file changed, 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3596d1782264..f3d9cdb2816d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1198,9 +1198,7 @@ M: hpa@zytor.com S: Maintained CPUSETS -P: Paul Jackson P: Paul Menage -M: pj@sgi.com M: menage@google.com L: linux-kernel@vger.kernel.org W: http://www.bullopensource.org/cpuset/ -- cgit v1.2.2 From bd7ebec64d65ccf72a955a50fec27caf0f2458f1 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Fri, 3 Oct 2008 15:23:44 -0700 Subject: MAINTAINERS: add mailing list for man-pages Nowadays, man-pages has an associated mailing list. Mention that list in MAINTAINERS. Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index f3d9cdb2816d..8dae4555f10e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2704,6 +2704,7 @@ MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7 P: Michael Kerrisk M: mtk.manpages@gmail.com W: http://www.kernel.org/doc/man-pages +L: linux-man@vger.kernel.org S: Supported MARVELL LIBERTAS WIRELESS DRIVER -- cgit v1.2.2 From 1d992ce905c838c2ca26fff8f2417cd31f667fd5 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Fri, 3 Oct 2008 15:23:44 -0700 Subject: SubmitChecklist: interfaces changes should CC linux-api@ Mention that patches that change the kernel-userland interface should be CCed to the new list linux-api@vger.kernel.org. Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/SubmitChecklist | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist index da10e0714241..21f0795af20f 100644 --- a/Documentation/SubmitChecklist +++ b/Documentation/SubmitChecklist @@ -67,6 +67,8 @@ kernel patches. 19: All new userspace interfaces are documented in Documentation/ABI/. See Documentation/ABI/README for more information. + Patches that change userspace interfaces should be CCed to + linux-api@vger.kernel.org. 20: Check that it all passes `make headers_check'. -- cgit v1.2.2 From 09b05f5ee04cd2e2af3384d50646f53c76712f10 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Fri, 3 Oct 2008 15:23:45 -0700 Subject: Documentation/HOWTO: info about interface changes should CC linux-api@vger The "Documentation" section of this file mentions that when an interface change is made, I should be CCed with info about the change (so that man-pages can document it). Additionally request that this info be CCed to the new linux-api@vger.kernel.org list. Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/HOWTO | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/HOWTO b/Documentation/HOWTO index c2371c5a98f9..48a3955f05fc 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -77,7 +77,8 @@ documentation files are also added which explain how to use the feature. When a kernel change causes the interface that the kernel exposes to userspace to change, it is recommended that you send the information or a patch to the manual pages explaining the change to the manual pages -maintainer at mtk.manpages@gmail.com. +maintainer at mtk.manpages@gmail.com, and CC the list +linux-api@vger.kernel.org. Here is a list of files that are in the kernel source tree that are required reading: -- cgit v1.2.2 From 7fe7b2f4ec14d6517078c5bc32b04301b468041c Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 3 Oct 2008 15:23:46 -0700 Subject: dw_dmac: fix copy/paste bug in tasklet The tasklet checks RAW.BLOCK twice, and does not check RAW.XFER. This is obviously wrong, and could theoretically cause the driver to hang. Reported-by: Nicolas Ferre Signed-off-by: Haavard Skinnemoen Acked-by: Dan Williams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/dma/dw_dmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 94df91771243..0778d99aea7c 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -364,7 +364,7 @@ static void dw_dma_tasklet(unsigned long data) int i; status_block = dma_readl(dw, RAW.BLOCK); - status_xfer = dma_readl(dw, RAW.BLOCK); + status_xfer = dma_readl(dw, RAW.XFER); status_err = dma_readl(dw, RAW.ERROR); dev_vdbg(dw->dma.dev, "tasklet: status_block=%x status_err=%x\n", -- cgit v1.2.2 From 07f696c7772fb3501e9531de38333c49143a8d52 Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Fri, 3 Oct 2008 15:23:47 -0700 Subject: leds-fsg: change order of initialization and deinitialization On initialization, we first do the ioremap and then register the led devices. On deinitialization, we do it in reverse order. This prevents someone calling into the brightness_set functions with an invalid latch_address. Signed-off-by: Sven Wegener Acked-by: Rod Whitby Acked-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-fsg.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c index be0e12144b8b..34935155c1c0 100644 --- a/drivers/leds/leds-fsg.c +++ b/drivers/leds/leds-fsg.c @@ -161,6 +161,16 @@ static int fsg_led_probe(struct platform_device *pdev) { int ret; + /* Map the LED chip select address space */ + latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512); + if (!latch_address) { + ret = -ENOMEM; + goto failremap; + } + + latch_value = 0xffff; + *latch_address = latch_value; + ret = led_classdev_register(&pdev->dev, &fsg_wlan_led); if (ret < 0) goto failwlan; @@ -185,20 +195,8 @@ static int fsg_led_probe(struct platform_device *pdev) if (ret < 0) goto failring; - /* Map the LED chip select address space */ - latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512); - if (!latch_address) { - ret = -ENOMEM; - goto failremap; - } - - latch_value = 0xffff; - *latch_address = latch_value; - return ret; - failremap: - led_classdev_unregister(&fsg_ring_led); failring: led_classdev_unregister(&fsg_sync_led); failsync: @@ -210,14 +208,14 @@ static int fsg_led_probe(struct platform_device *pdev) failwan: led_classdev_unregister(&fsg_wlan_led); failwlan: + iounmap(latch_address); + failremap: return ret; } static int fsg_led_remove(struct platform_device *pdev) { - iounmap(latch_address); - led_classdev_unregister(&fsg_wlan_led); led_classdev_unregister(&fsg_wan_led); led_classdev_unregister(&fsg_sata_led); @@ -225,6 +223,8 @@ static int fsg_led_remove(struct platform_device *pdev) led_classdev_unregister(&fsg_sync_led); led_classdev_unregister(&fsg_ring_led); + iounmap(latch_address); + return 0; } -- cgit v1.2.2 From 95bf14bff58fd200f0c2147c84582cc2488367d0 Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Fri, 3 Oct 2008 15:23:48 -0700 Subject: leds-pca955x: add proper error handling and fix bogus memory handling Check the return value of led_classdev_register and unregister all registered devices, if registering one device fails. Also the dynamic memory handling is totally bogus. You can't allocate multiple chunks via kzalloc() and expect them to be in order later. I wonder how this ever worked. Signed-off-by: Sven Wegener Acked-by: Nate Case Tested-by: Nate Case Acked-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-pca955x.c | 70 ++++++++++++++++++++++++--------------------- 1 file changed, 38 insertions(+), 32 deletions(-) diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c index 146c06972863..f508729123b5 100644 --- a/drivers/leds/leds-pca955x.c +++ b/drivers/leds/leds-pca955x.c @@ -248,11 +248,10 @@ static int __devinit pca955x_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct pca955x_led *pca955x; - int i; - int err = -ENODEV; struct pca955x_chipdef *chip; struct i2c_adapter *adapter; struct led_platform_data *pdata; + int i, err; chip = &pca955x_chipdefs[id->driver_data]; adapter = to_i2c_adapter(client->dev.parent); @@ -282,43 +281,41 @@ static int __devinit pca955x_probe(struct i2c_client *client, } } + pca955x = kzalloc(sizeof(*pca955x) * chip->bits, GFP_KERNEL); + if (!pca955x) + return -ENOMEM; + + i2c_set_clientdata(client, pca955x); + for (i = 0; i < chip->bits; i++) { - pca955x = kzalloc(sizeof(struct pca955x_led), GFP_KERNEL); - if (!pca955x) { - err = -ENOMEM; - goto exit; - } + pca955x[i].chipdef = chip; + pca955x[i].client = client; + pca955x[i].led_num = i; - pca955x->chipdef = chip; - pca955x->client = client; - pca955x->led_num = i; /* Platform data can specify LED names and default triggers */ if (pdata) { if (pdata->leds[i].name) - snprintf(pca955x->name, 32, "pca955x:%s", - pdata->leds[i].name); + snprintf(pca955x[i].name, + sizeof(pca955x[i].name), "pca955x:%s", + pdata->leds[i].name); if (pdata->leds[i].default_trigger) - pca955x->led_cdev.default_trigger = + pca955x[i].led_cdev.default_trigger = pdata->leds[i].default_trigger; } else { - snprintf(pca955x->name, 32, "pca955x:%d", i); + snprintf(pca955x[i].name, sizeof(pca955x[i].name), + "pca955x:%d", i); } - spin_lock_init(&pca955x->lock); - pca955x->led_cdev.name = pca955x->name; - pca955x->led_cdev.brightness_set = - pca955x_led_set; + spin_lock_init(&pca955x[i].lock); - /* - * Client data is a pointer to the _first_ pca955x_led - * struct - */ - if (i == 0) - i2c_set_clientdata(client, pca955x); + pca955x[i].led_cdev.name = pca955x[i].name; + pca955x[i].led_cdev.brightness_set = pca955x_led_set; - INIT_WORK(&(pca955x->work), pca955x_led_work); + INIT_WORK(&pca955x[i].work, pca955x_led_work); - led_classdev_register(&client->dev, &(pca955x->led_cdev)); + err = led_classdev_register(&client->dev, &pca955x[i].led_cdev); + if (err < 0) + goto exit; } /* Turn off LEDs */ @@ -336,23 +333,32 @@ static int __devinit pca955x_probe(struct i2c_client *client, pca955x_write_psc(client, 1, 0); return 0; + exit: + while (i--) { + led_classdev_unregister(&pca955x[i].led_cdev); + cancel_work_sync(&pca955x[i].work); + } + + kfree(pca955x); + i2c_set_clientdata(client, NULL); + return err; } static int __devexit pca955x_remove(struct i2c_client *client) { struct pca955x_led *pca955x = i2c_get_clientdata(client); - int leds = pca955x->chipdef->bits; int i; - for (i = 0; i < leds; i++) { - led_classdev_unregister(&(pca955x->led_cdev)); - cancel_work_sync(&(pca955x->work)); - kfree(pca955x); - pca955x = pca955x + 1; + for (i = 0; i < pca955x->chipdef->bits; i++) { + led_classdev_unregister(&pca955x[i].led_cdev); + cancel_work_sync(&pca955x[i].work); } + kfree(pca955x); + i2c_set_clientdata(client, NULL); + return 0; } -- cgit v1.2.2 From 76acae04c892287949e1191e99600f3e952e43f7 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 3 Oct 2008 15:23:49 -0700 Subject: ACPI: Make /proc/acpi/wakeup interface handle PCI devices (again) Make the ACPI /proc/acpi/wakeup interface set the appropriate wake-up bits of physical devices corresponding to the ACPI devices and make those bits be set initially for devices that are enabled to wake up by default. This is needed to restore the 2.6.26 and earlier behavior for the PCI devices that were previously handled correctly with the help of the /proc/acpi/wakeup interface. Signed-off-by: Rafael J. Wysocki Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/glue.c | 5 ++++- drivers/acpi/sleep/proc.c | 10 ++++++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 084109507c9f..8dd3336efd7e 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -165,8 +165,11 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) "firmware_node"); ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj, "physical_node"); - if (acpi_dev->wakeup.flags.valid) + if (acpi_dev->wakeup.flags.valid) { device_set_wakeup_capable(dev, true); + device_set_wakeup_enable(dev, + acpi_dev->wakeup.state.enabled); + } } return 0; diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 4ebbba2b6b19..bf5b04de02d1 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -377,6 +377,14 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) return 0; } +static void physical_device_enable_wakeup(struct acpi_device *adev) +{ + struct device *dev = acpi_get_physical_device(adev->handle); + + if (dev && device_can_wakeup(dev)) + device_set_wakeup_enable(dev, adev->wakeup.state.enabled); +} + static ssize_t acpi_system_write_wakeup_device(struct file *file, const char __user * buffer, @@ -411,6 +419,7 @@ acpi_system_write_wakeup_device(struct file *file, } } if (found_dev) { + physical_device_enable_wakeup(found_dev); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct @@ -428,6 +437,7 @@ acpi_system_write_wakeup_device(struct file *file, dev->pnp.bus_id, found_dev->pnp.bus_id); dev->wakeup.state.enabled = found_dev->wakeup.state.enabled; + physical_device_enable_wakeup(dev); } } } -- cgit v1.2.2 From 07454bfff151d2465ada809bbaddf3548cc1097c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 4 Oct 2008 10:51:07 +0200 Subject: clockevents: check broadcast tick device not the clock events device Impact: jiffies increment too fast. Hugh Dickins noted that with NOHZ=n and HIGHRES=n jiffies get incremented too fast. The reason is a wrong check in the broadcast enter/exit code, which keeps the local apic timer in periodic mode when the switch happens. Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index bd7034542399..cb01cd8f919b 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -235,7 +235,8 @@ static void tick_do_broadcast_on_off(void *why) case CLOCK_EVT_NOTIFY_BROADCAST_FORCE: if (!cpu_isset(cpu, tick_broadcast_mask)) { cpu_set(cpu, tick_broadcast_mask); - if (bc->mode == TICKDEV_MODE_PERIODIC) + if (tick_broadcast_device.mode == + TICKDEV_MODE_PERIODIC) clockevents_shutdown(dev); } if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE) @@ -245,7 +246,8 @@ static void tick_do_broadcast_on_off(void *why) if (!tick_broadcast_force && cpu_isset(cpu, tick_broadcast_mask)) { cpu_clear(cpu, tick_broadcast_mask); - if (bc->mode == TICKDEV_MODE_PERIODIC) + if (tick_broadcast_device.mode == + TICKDEV_MODE_PERIODIC) tick_setup_periodic(dev, 0); } break; -- cgit v1.2.2 From a252e3e35ef8144fb772da70bb93c99a1486097a Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 3 Oct 2008 14:46:17 +0200 Subject: atmel-mci: Initialize BLKR before sending data transfer command The atmel-mci driver sometimes fails data transfers like this: mmcblk0: error -5 transferring data end_request: I/O error, dev mmcblk0, sector 2749769 end_request: I/O error, dev mmcblk0, sector 2749777 It turns out that this might be caused by the BLKR register (which contains the block size and the number of blocks being transfered) being initialized too late. This patch moves the initialization of BLKR so that it contains the correct value before the block transfer command is sent. This error is difficult to reproduce, but if you insert a long delay (mdelay(10) or thereabouts) between the calls to atmci_start_command() and atmci_submit_data(), all transfers seem to fail without this patch, while I haven't seen any failures with this patch. Reported-by: Hein_Tibosch Signed-off-by: Haavard Skinnemoen --- drivers/mmc/host/atmel-mci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 917035e16da4..00008967ef7a 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -426,8 +426,6 @@ static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) host->sg = NULL; host->data = data; - mci_writel(host, BLKR, MCI_BCNT(data->blocks) - | MCI_BLKLEN(data->blksz)); dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n", MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); @@ -483,6 +481,10 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) if (data->blocks > 1 && data->blksz & 3) goto fail; atmci_set_timeout(host, data); + + /* Must set block count/size before sending command */ + mci_writel(host, BLKR, MCI_BCNT(data->blocks) + | MCI_BLKLEN(data->blksz)); } iflags = MCI_CMDRDY; -- cgit v1.2.2 From c06ad2580dca4eb14ca07541d4f00a3b7cbcf12f Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 31 Jul 2008 14:49:16 +0200 Subject: atmel-mci: Implement tasklet as a state machine With the current system of completed/pending events, things may get handled in different order depending on which event triggers first. For example, if the data transfer is complete before the command, the stop command must be sent after the command is complete, not the data. This creates a bit of complexity around the stop command. By having the tasklet go through a sequence of clearly defined states, things always happen in a certain order even if the events come at different times, so the stop command can simply be sent when we exit the "sending data" state because we will never enter that state before the command has been sent successfully. Signed-off-by: Haavard Skinnemoen --- drivers/mmc/host/atmel-mci.c | 249 +++++++++++++++++++++++++------------------ 1 file changed, 145 insertions(+), 104 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 00008967ef7a..d834e3756aef 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -36,11 +36,17 @@ enum { EVENT_CMD_COMPLETE = 0, - EVENT_DATA_ERROR, - EVENT_DATA_COMPLETE, - EVENT_STOP_SENT, - EVENT_STOP_COMPLETE, EVENT_XFER_COMPLETE, + EVENT_DATA_COMPLETE, + EVENT_DATA_ERROR, +}; + +enum atmel_mci_state { + STATE_SENDING_CMD = 0, + STATE_SENDING_DATA, + STATE_DATA_BUSY, + STATE_SENDING_STOP, + STATE_DATA_ERROR, }; struct atmel_mci { @@ -56,7 +62,6 @@ struct atmel_mci { u32 cmd_status; u32 data_status; - u32 stop_status; u32 stop_cmdr; u32 mode_reg; @@ -65,6 +70,7 @@ struct atmel_mci { struct tasklet_struct tasklet; unsigned long pending_events; unsigned long completed_events; + enum atmel_mci_state state; int present; int detect_pin; @@ -79,18 +85,12 @@ struct atmel_mci { struct platform_device *pdev; }; -#define atmci_is_completed(host, event) \ - test_bit(event, &host->completed_events) #define atmci_test_and_clear_pending(host, event) \ test_and_clear_bit(event, &host->pending_events) -#define atmci_test_and_set_completed(host, event) \ - test_and_set_bit(event, &host->completed_events) #define atmci_set_completed(host, event) \ set_bit(event, &host->completed_events) #define atmci_set_pending(host, event) \ set_bit(event, &host->pending_events) -#define atmci_clear_pending(host, event) \ - clear_bit(event, &host->pending_events) /* * The debugfs stuff below is mostly optimized away when @@ -258,6 +258,10 @@ static void atmci_init_debugfs(struct atmel_mci *host) if (!node) goto err; + node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); + if (!node) + goto err; + node = debugfs_create_x32("pending_events", S_IRUSR, root, (u32 *)&host->pending_events); if (!node) @@ -378,8 +382,6 @@ static void atmci_start_command(struct atmel_mci *host, struct mmc_command *cmd, u32 cmd_flags) { - /* Must read host->cmd after testing event flags */ - smp_rmb(); WARN_ON(host->cmd); host->cmd = cmd; @@ -472,6 +474,7 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->mrq = mrq; host->pending_events = 0; host->completed_events = 0; + host->state = STATE_SENDING_CMD; atmci_enable(host); @@ -596,8 +599,10 @@ static struct mmc_host_ops atmci_ops = { }; static void atmci_command_complete(struct atmel_mci *host, - struct mmc_command *cmd, u32 status) + struct mmc_command *cmd) { + u32 status = host->cmd_status; + /* Read the response from the card (up to 16 bytes) */ cmd->resp[0] = mci_readl(host, RSPR); cmd->resp[1] = mci_readl(host, RSPR); @@ -666,20 +671,32 @@ static void atmci_detect_change(unsigned long data) * commands or data transfers. */ mci_writel(host, CR, MCI_CR_SWRST); + mci_readl(host, SR); - if (!atmci_is_completed(host, EVENT_CMD_COMPLETE)) - mrq->cmd->error = -ENOMEDIUM; + host->data = NULL; + host->cmd = NULL; - if (mrq->data && !atmci_is_completed(host, - EVENT_DATA_COMPLETE)) { - host->data = NULL; + switch (host->state) { + case STATE_SENDING_CMD: + mrq->cmd->error = -ENOMEDIUM; + if (!mrq->data) + break; + /* fall through */ + case STATE_SENDING_DATA: mrq->data->error = -ENOMEDIUM; - } - if (mrq->stop && !atmci_is_completed(host, - EVENT_STOP_COMPLETE)) + break; + case STATE_DATA_BUSY: + case STATE_DATA_ERROR: + if (mrq->data->error == -EINPROGRESS) + mrq->data->error = -ENOMEDIUM; + if (!mrq->stop) + break; + /* fall through */ + case STATE_SENDING_STOP: mrq->stop->error = -ENOMEDIUM; + break; + } - host->cmd = NULL; atmci_request_end(host->mmc, mrq); } @@ -693,81 +710,116 @@ static void atmci_tasklet_func(unsigned long priv) struct atmel_mci *host = mmc_priv(mmc); struct mmc_request *mrq = host->mrq; struct mmc_data *data = host->data; + struct mmc_command *cmd = host->cmd; + enum atmel_mci_state state = host->state; + enum atmel_mci_state prev_state; + u32 status; + + state = host->state; dev_vdbg(&mmc->class_dev, - "tasklet: pending/completed/mask %lx/%lx/%x\n", - host->pending_events, host->completed_events, + "tasklet: state %u pending/completed/mask %lx/%lx/%x\n", + state, host->pending_events, host->completed_events, mci_readl(host, IMR)); - if (atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) { - /* - * host->cmd must be set to NULL before the interrupt - * handler sees EVENT_CMD_COMPLETE - */ - host->cmd = NULL; - smp_wmb(); - atmci_set_completed(host, EVENT_CMD_COMPLETE); - atmci_command_complete(host, mrq->cmd, host->cmd_status); - - if (!mrq->cmd->error && mrq->stop - && atmci_is_completed(host, EVENT_XFER_COMPLETE) - && !atmci_test_and_set_completed(host, - EVENT_STOP_SENT)) - send_stop_cmd(host->mmc, mrq->data); - } - if (atmci_test_and_clear_pending(host, EVENT_STOP_COMPLETE)) { - /* - * host->cmd must be set to NULL before the interrupt - * handler sees EVENT_STOP_COMPLETE - */ - host->cmd = NULL; - smp_wmb(); - atmci_set_completed(host, EVENT_STOP_COMPLETE); - atmci_command_complete(host, mrq->stop, host->stop_status); - } - if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { - u32 status = host->data_status; + do { + prev_state = state; - dev_vdbg(&mmc->class_dev, "data error: status=%08x\n", status); + switch (state) { + case STATE_SENDING_CMD: + if (!atmci_test_and_clear_pending(host, + EVENT_CMD_COMPLETE)) + break; - atmci_set_completed(host, EVENT_DATA_ERROR); - atmci_set_completed(host, EVENT_DATA_COMPLETE); + host->cmd = NULL; + atmci_set_completed(host, EVENT_CMD_COMPLETE); + atmci_command_complete(host, mrq->cmd); + if (!mrq->data || cmd->error) { + atmci_request_end(mmc, host->mrq); + break; + } - if (status & MCI_DTOE) { - dev_dbg(&mmc->class_dev, - "data timeout error\n"); - data->error = -ETIMEDOUT; - } else if (status & MCI_DCRCE) { - dev_dbg(&mmc->class_dev, "data CRC error\n"); - data->error = -EILSEQ; - } else { - dev_dbg(&mmc->class_dev, - "data FIFO error (status=%08x)\n", - status); - data->error = -EIO; - } + prev_state = state = STATE_SENDING_DATA; + /* fall through */ - if (host->present && data->stop - && atmci_is_completed(host, EVENT_CMD_COMPLETE) - && !atmci_test_and_set_completed( - host, EVENT_STOP_SENT)) - send_stop_cmd(host->mmc, data); + case STATE_SENDING_DATA: + if (atmci_test_and_clear_pending(host, + EVENT_DATA_ERROR)) { + if (data->stop) + send_stop_cmd(host->mmc, data); + state = STATE_DATA_ERROR; + break; + } - host->data = NULL; - } - if (atmci_test_and_clear_pending(host, EVENT_DATA_COMPLETE)) { - atmci_set_completed(host, EVENT_DATA_COMPLETE); + if (!atmci_test_and_clear_pending(host, + EVENT_XFER_COMPLETE)) + break; - if (!atmci_is_completed(host, EVENT_DATA_ERROR)) { - data->bytes_xfered = data->blocks * data->blksz; - data->error = 0; - } + atmci_set_completed(host, EVENT_XFER_COMPLETE); + prev_state = state = STATE_DATA_BUSY; + /* fall through */ - host->data = NULL; - } + case STATE_DATA_BUSY: + if (!atmci_test_and_clear_pending(host, + EVENT_DATA_COMPLETE)) + break; + + host->data = NULL; + atmci_set_completed(host, EVENT_DATA_COMPLETE); + status = host->data_status; + if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) { + if (status & MCI_DTOE) { + dev_dbg(&mmc->class_dev, + "data timeout error\n"); + data->error = -ETIMEDOUT; + } else if (status & MCI_DCRCE) { + dev_dbg(&mmc->class_dev, + "data CRC error\n"); + data->error = -EILSEQ; + } else { + dev_dbg(&mmc->class_dev, + "data FIFO error (status=%08x)\n", + status); + data->error = -EIO; + } + } else { + data->bytes_xfered = data->blocks * data->blksz; + data->error = 0; + } + + if (!data->stop) { + atmci_request_end(mmc, host->mrq); + prev_state = state; + break; + } - if (host->mrq && !host->cmd && !host->data) - atmci_request_end(mmc, host->mrq); + prev_state = state = STATE_SENDING_STOP; + if (!data->error) + send_stop_cmd(host->mmc, data); + /* fall through */ + + case STATE_SENDING_STOP: + if (!atmci_test_and_clear_pending(host, + EVENT_CMD_COMPLETE)) + break; + + host->cmd = NULL; + atmci_command_complete(host, mrq->stop); + atmci_request_end(mmc, host->mrq); + prev_state = state; + break; + + case STATE_DATA_ERROR: + if (!atmci_test_and_clear_pending(host, + EVENT_XFER_COMPLETE)) + break; + + state = STATE_DATA_BUSY; + break; + } + } while (state != prev_state); + + host->state = state; } static void atmci_read_data_pio(struct atmel_mci *host) @@ -832,10 +884,7 @@ done: mci_writel(host, IDR, MCI_RXRDY); mci_writel(host, IER, MCI_NOTBUSY); data->bytes_xfered += nbytes; - atmci_set_completed(host, EVENT_XFER_COMPLETE); - if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE) - && !atmci_test_and_set_completed(host, EVENT_STOP_SENT)) - send_stop_cmd(host->mmc, data); + atmci_set_pending(host, EVENT_XFER_COMPLETE); } static void atmci_write_data_pio(struct atmel_mci *host) @@ -903,10 +952,7 @@ done: mci_writel(host, IDR, MCI_TXRDY); mci_writel(host, IER, MCI_NOTBUSY); data->bytes_xfered += nbytes; - atmci_set_completed(host, EVENT_XFER_COMPLETE); - if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE) - && !atmci_test_and_set_completed(host, EVENT_STOP_SENT)) - send_stop_cmd(host->mmc, data); + atmci_set_pending(host, EVENT_XFER_COMPLETE); } static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status) @@ -915,14 +961,8 @@ static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status) mci_writel(host, IDR, MCI_CMDRDY); - if (atmci_is_completed(host, EVENT_STOP_SENT)) { - host->stop_status = status; - atmci_set_pending(host, EVENT_STOP_COMPLETE); - } else { - host->cmd_status = status; - atmci_set_pending(host, EVENT_CMD_COMPLETE); - } - + host->cmd_status = status; + atmci_set_pending(host, EVENT_CMD_COMPLETE); tasklet_schedule(&host->tasklet); } @@ -951,8 +991,9 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) tasklet_schedule(&host->tasklet); } if (pending & MCI_NOTBUSY) { - mci_writel(host, IDR, (MCI_NOTBUSY - | ATMCI_DATA_ERROR_FLAGS)); + mci_writel(host, IDR, + ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY); + host->data_status = status; atmci_set_pending(host, EVENT_DATA_COMPLETE); tasklet_schedule(&host->tasklet); } -- cgit v1.2.2 From 945533b538c6c6185afc77ba4a81eeba8f6ef8dd Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 3 Oct 2008 17:48:16 +0200 Subject: atmel-mci: Don't stop the clock between transfers Some cards might get upset if we turn off the clock for extended periods of time. So keep the clock running until the mmc core tells us to turn it off. Also, don't reset the controller between each transfer. That was an attempt to work around earlier bugs, and it never really worked very well. Signed-off-by: Haavard Skinnemoen --- drivers/mmc/host/atmel-mci.c | 60 ++++++++++++++++---------------------------- 1 file changed, 22 insertions(+), 38 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index d834e3756aef..14ab28da7fa8 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -279,23 +279,6 @@ err: "failed to initialize debugfs for controller\n"); } -static void atmci_enable(struct atmel_mci *host) -{ - clk_enable(host->mck); - mci_writel(host, CR, MCI_CR_MCIEN); - mci_writel(host, MR, host->mode_reg); - mci_writel(host, SDCR, host->sdc_reg); -} - -static void atmci_disable(struct atmel_mci *host) -{ - mci_writel(host, CR, MCI_CR_SWRST); - - /* Stall until write is complete, then disable the bus clock */ - mci_readl(host, SR); - clk_disable(host->mck); -} - static inline unsigned int ns_to_clocks(struct atmel_mci *host, unsigned int ns) { @@ -408,8 +391,6 @@ static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq) WARN_ON(host->cmd || host->data); host->mrq = NULL; - atmci_disable(host); - mmc_request_done(mmc, mrq); } @@ -476,8 +457,6 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->completed_events = 0; host->state = STATE_SENDING_CMD; - atmci_enable(host); - /* We don't support multiple blocks of weird lengths. */ data = mrq->data; if (data) { @@ -520,7 +499,6 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) return; fail: - atmci_disable(host); host->mrq = NULL; mrq->cmd->error = -EINVAL; mmc_request_done(mmc, mrq); @@ -530,9 +508,21 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct atmel_mci *host = mmc_priv(mmc); + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + host->sdc_reg = 0; + break; + case MMC_BUS_WIDTH_4: + host->sdc_reg = MCI_SDCBUS_4BIT; + break; + } + if (ios->clock) { u32 clkdiv; + if (!host->mode_reg) + clk_enable(host->mck); + /* Set clock rate */ clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1; if (clkdiv > 255) { @@ -544,26 +534,20 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF | MCI_MR_RDPROOF; - } - switch (ios->bus_width) { - case MMC_BUS_WIDTH_1: - host->sdc_reg = 0; - break; - case MMC_BUS_WIDTH_4: - host->sdc_reg = MCI_SDCBUS_4BIT; - break; + mci_writel(host, CR, MCI_CR_MCIEN); + mci_writel(host, MR, host->mode_reg); + mci_writel(host, SDCR, host->sdc_reg); + } else { + mci_writel(host, CR, MCI_CR_MCIDIS); + if (host->mode_reg) { + mci_readl(host, MR); + clk_disable(host->mck); + } + host->mode_reg = 0; } switch (ios->power_mode) { - case MMC_POWER_ON: - /* Send init sequence (74 clock cycles) */ - atmci_enable(host); - mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT); - while (!(mci_readl(host, SR) & MCI_CMDRDY)) - cpu_relax(); - atmci_disable(host); - break; default: /* * TODO: None of the currently available AVR32-based -- cgit v1.2.2 From 6b918657b7431e4c5c953b8222ae2f4fc1b2576a Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 7 Aug 2008 14:08:49 +0200 Subject: atmel-mci: Platform code for supporting multiple mmc slots Add the necessary platform infrastructure to support multiple mmc/sdcard slots all at once through a single controller. Currently, the driver will use the first valid slot it finds and stick with that, but later patches will add support for switching between several slots on the fly. Extend the platform data structure with per-slot information: MMC/SDcard bus width and card detect/write protect pins. This will affect the pin muxing as well as the capabilities announced to the mmc core. Note that board code is now required to supply a mci_platform_data struct to at32_add_device_mci(). Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atngw100/setup.c | 7 +++- arch/avr32/boards/atstk1000/atstk1002.c | 18 +++++---- arch/avr32/boards/atstk1000/atstk1003.c | 12 +++++- arch/avr32/boards/atstk1000/atstk1004.c | 12 +++++- arch/avr32/include/asm/atmel-mci.h | 22 +++++++++- arch/avr32/mach-at32ap/at32ap700x.c | 72 ++++++++++++++++++++++++--------- drivers/mmc/host/atmel-mci-regs.h | 6 ++- drivers/mmc/host/atmel-mci.c | 24 +++++++++-- 8 files changed, 137 insertions(+), 36 deletions(-) diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index b8286f1ce854..f3085208959f 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -53,8 +53,11 @@ static struct spi_board_info spi0_board_info[] __initdata = { }; static struct mci_platform_data __initdata mci0_data = { - .detect_pin = GPIO_PIN_PC(25), - .wp_pin = GPIO_PIN_PE(0), + .slot[0] = { + .bus_width = 4, + .detect_pin = GPIO_PIN_PC(25), + .wp_pin = GPIO_PIN_PE(0), + }, }; /* diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index dfc3443e23aa..4fedbc4488de 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -264,16 +264,20 @@ void __init setup_board(void) #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + /* MMC card detect requires MACB0 *NOT* be used */ #ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM -static struct mci_platform_data __initdata mci0_data = { - .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */ - .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */ -}; -#define MCI_PDATA &mci0_data + .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */ + .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */ #else -#define MCI_PDATA NULL + .detect_pin = -ENODEV, + .wp_pin = -ENODEV, #endif /* SW6 for sd{cd,wp} routing */ + }, +}; #endif /* SW2 for MMC signal routing */ @@ -326,7 +330,7 @@ static int __init atstk1002_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0, MCI_PDATA); + at32_add_device_mci(0, &mci0_pdata); #endif #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM set_hw_addr(at32_add_device_eth(1, ð_data[1])); diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index 0cf664174c17..acc61235b895 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -66,6 +66,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { { } }; #endif +#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -ENODEV, + .wp_pin = -ENODEV, + }, +}; +#endif + #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static void __init atstk1003_setup_extdac(void) { @@ -154,7 +164,7 @@ static int __init atstk1003_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0, NULL); + at32_add_device_mci(0, &mci0_data); #endif at32_add_device_usba(0, NULL); #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index 50a5273e5916..d6a2d02f0329 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -71,6 +71,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { { } }; #endif +#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -ENODEV, + .wp_pin = -ENODEV, + }, +}; +#endif + #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static void __init atstk1004_setup_extdac(void) { @@ -137,7 +147,7 @@ static int __init atstk1004_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0, NULL); + at32_add_device_mci(0, &mci0_data); #endif at32_add_device_lcdc(0, &atstk1000_lcdc_data, fbmem_start, fbmem_size, 0); diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h index c2ea6e1c9aa1..d38c64ca41e8 100644 --- a/arch/avr32/include/asm/atmel-mci.h +++ b/arch/avr32/include/asm/atmel-mci.h @@ -1,9 +1,29 @@ #ifndef __ASM_AVR32_ATMEL_MCI_H #define __ASM_AVR32_ATMEL_MCI_H -struct mci_platform_data { +/** + * struct mci_slot_pdata - board-specific per-slot configuration + * @bus_width: Number of data lines wired up the slot + * @detect_pin: GPIO pin wired to the card detect switch + * @wp_pin: GPIO pin wired to the write protect sensor + * + * If a given slot is not present on the board, @bus_width should be + * set to 0. The other fields are ignored in this case. + * + * Any pins that aren't available should be set to a negative value. + */ +struct mci_slot_pdata { + unsigned int bus_width; int detect_pin; int wp_pin; }; +/** + * struct mci_platform_data - board-specific MMC/SDcard configuration + * @slot: Per-slot configuration data. + */ +struct mci_platform_data { + struct mci_slot_pdata slot[2]; +}; + #endif /* __ASM_AVR32_ATMEL_MCI_H */ diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index e01dbe4ebb40..9967d5a3b6eb 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1272,10 +1272,13 @@ static struct clk atmel_mci0_pclk = { struct platform_device *__init at32_add_device_mci(unsigned int id, struct mci_platform_data *data) { - struct mci_platform_data _data; struct platform_device *pdev; - if (id != 0) + if (id != 0 || !data) + return NULL; + + /* Must have at least one usable slot */ + if (!data->slot[0].bus_width && !data->slot[1].bus_width) return NULL; pdev = platform_device_alloc("atmel_mci", id); @@ -1286,28 +1289,61 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) ARRAY_SIZE(atmel_mci0_resource))) goto fail; - if (!data) { - data = &_data; - memset(data, -1, sizeof(struct mci_platform_data)); - data->detect_pin = GPIO_PIN_NONE; - data->wp_pin = GPIO_PIN_NONE; - } if (platform_device_add_data(pdev, data, sizeof(struct mci_platform_data))) goto fail; - select_peripheral(PA(10), PERIPH_A, 0); /* CLK */ - select_peripheral(PA(11), PERIPH_A, 0); /* CMD */ - select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */ - select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */ - select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ - select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ + /* CLK line is common to both slots */ + select_peripheral(PA(10), PERIPH_A, 0); - if (gpio_is_valid(data->detect_pin)) - at32_select_gpio(data->detect_pin, 0); - if (gpio_is_valid(data->wp_pin)) - at32_select_gpio(data->wp_pin, 0); + switch (data->slot[0].bus_width) { + case 4: + select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */ + select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ + select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ + /* fall through */ + case 1: + select_peripheral(PA(11), PERIPH_A, 0); /* CMD */ + select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */ + + if (gpio_is_valid(data->slot[0].detect_pin)) + at32_select_gpio(data->slot[0].detect_pin, 0); + if (gpio_is_valid(data->slot[0].wp_pin)) + at32_select_gpio(data->slot[0].wp_pin, 0); + break; + case 0: + /* Slot is unused */ + break; + default: + goto fail; + } + + switch (data->slot[1].bus_width) { + case 4: + select_peripheral(PB(8), PERIPH_B, 0); /* DATA1 */ + select_peripheral(PB(9), PERIPH_B, 0); /* DATA2 */ + select_peripheral(PB(10), PERIPH_B, 0); /* DATA3 */ + /* fall through */ + case 1: + select_peripheral(PB(6), PERIPH_B, 0); /* CMD */ + select_peripheral(PB(7), PERIPH_B, 0); /* DATA0 */ + + if (gpio_is_valid(data->slot[1].detect_pin)) + at32_select_gpio(data->slot[1].detect_pin, 0); + if (gpio_is_valid(data->slot[1].wp_pin)) + at32_select_gpio(data->slot[1].wp_pin, 0); + break; + case 0: + /* Slot is unused */ + break; + default: + if (!data->slot[0].bus_width) + goto fail; + + data->slot[1].bus_width = 0; + break; + } atmel_mci0_pclk.dev = &pdev->dev; diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h index 26bd80e65031..b58364ed6bba 100644 --- a/drivers/mmc/host/atmel-mci-regs.h +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -25,8 +25,10 @@ #define MCI_SDCR 0x000c /* SD Card / SDIO */ # define MCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */ # define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */ -# define MCI_SDCBUS_1BIT ( 0 << 7) /* 1-bit data bus */ -# define MCI_SDCBUS_4BIT ( 1 << 7) /* 4-bit data bus */ +# define MCI_SDCSEL_MASK ( 3 << 0) +# define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */ +# define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */ +# define MCI_SDCBUS_MASK ( 3 << 6) #define MCI_ARGR 0x0010 /* Command Argument */ #define MCI_CMDR 0x0014 /* Command */ # define MCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 14ab28da7fa8..8170905a0401 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -508,9 +508,10 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct atmel_mci *host = mmc_priv(mmc); + host->sdc_reg &= ~MCI_SDCBUS_MASK; switch (ios->bus_width) { case MMC_BUS_WIDTH_1: - host->sdc_reg = 0; + host->sdc_reg |= MCI_SDCBUS_1BIT; break; case MMC_BUS_WIDTH_4: host->sdc_reg = MCI_SDCBUS_4BIT; @@ -1014,9 +1015,11 @@ static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) static int __init atmci_probe(struct platform_device *pdev) { struct mci_platform_data *pdata; + struct mci_slot_pdata *slot; struct atmel_mci *host; struct mmc_host *mmc; struct resource *regs; + u32 sdc_reg; int irq; int ret; @@ -1030,6 +1033,17 @@ static int __init atmci_probe(struct platform_device *pdev) if (irq < 0) return irq; + /* TODO: Allow using several slots at once */ + if (pdata->slot[0].bus_width) { + sdc_reg = MCI_SDCSEL_SLOT_A; + slot = &pdata->slot[0]; + } else if (pdata->slot[1].bus_width) { + sdc_reg = MCI_SDCSEL_SLOT_B; + slot = &pdata->slot[1]; + } else { + return -EINVAL; + } + mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev); if (!mmc) return -ENOMEM; @@ -1037,8 +1051,9 @@ static int __init atmci_probe(struct platform_device *pdev) host = mmc_priv(mmc); host->pdev = pdev; host->mmc = mmc; - host->detect_pin = pdata->detect_pin; - host->wp_pin = pdata->wp_pin; + host->detect_pin = slot->detect_pin; + host->wp_pin = slot->wp_pin; + host->sdc_reg = sdc_reg; host->mck = clk_get(&pdev->dev, "mci_clk"); if (IS_ERR(host->mck)) { @@ -1062,7 +1077,8 @@ static int __init atmci_probe(struct platform_device *pdev) mmc->f_min = (host->bus_hz + 511) / 512; mmc->f_max = host->bus_hz / 2; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps |= MMC_CAP_4_BIT_DATA; + if (slot->bus_width >= 4) + mmc->caps |= MMC_CAP_4_BIT_DATA; mmc->max_hw_segs = 64; mmc->max_phys_segs = 64; -- cgit v1.2.2 From 965ebf33ea5afb6386f5b57cc71e6572253746b3 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 17 Sep 2008 20:53:55 +0200 Subject: atmel-mci: support multiple mmc slots The Atmel MCI controller can drive multiple cards through separate sets of pins, but only one at a time. This patch adds support for multiplexing access to the controller so that multiple card slots can be used as if they were hooked up to separate mmc controllers. The atmel-mci driver registers each slot as a separate mmc_host. Both access the same common controller state, but they also have some state on their own for card detection/write protect handling, and separate shadows of the MR and SDCR registers. When one of the slots receives a request from the mmc core, the common controller state is checked. If it's idle, the request is submitted immediately. If not, the request is added to a queue. When a request is done, the queue is checked and if there is a queued request, it is submitted before the completion callback is called. This patch also includes a few cleanups and fixes, including a locking overhaul. I had to change the locking extensively in any case, so I might as well try to get it right. The driver no longer takes any irq-safe locks, which may or may not improve the overall system performance. This patch also adds a bit of documentation of the internal data structures. Signed-off-by: Haavard Skinnemoen --- arch/avr32/include/asm/atmel-mci.h | 8 +- drivers/mmc/host/atmel-mci.c | 922 ++++++++++++++++++++++++------------- 2 files changed, 621 insertions(+), 309 deletions(-) diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h index d38c64ca41e8..5d5ae1295cfd 100644 --- a/arch/avr32/include/asm/atmel-mci.h +++ b/arch/avr32/include/asm/atmel-mci.h @@ -1,6 +1,8 @@ #ifndef __ASM_AVR32_ATMEL_MCI_H #define __ASM_AVR32_ATMEL_MCI_H +#define ATMEL_MCI_MAX_NR_SLOTS 2 + /** * struct mci_slot_pdata - board-specific per-slot configuration * @bus_width: Number of data lines wired up the slot @@ -11,6 +13,10 @@ * set to 0. The other fields are ignored in this case. * * Any pins that aren't available should be set to a negative value. + * + * Note that support for multiple slots is experimental -- some cards + * might get upset if we don't get the clock management exactly right. + * But in most cases, it should work just fine. */ struct mci_slot_pdata { unsigned int bus_width; @@ -23,7 +29,7 @@ struct mci_slot_pdata { * @slot: Per-slot configuration data. */ struct mci_platform_data { - struct mci_slot_pdata slot[2]; + struct mci_slot_pdata slot[ATMEL_MCI_MAX_NR_SLOTS]; }; #endif /* __ASM_AVR32_ATMEL_MCI_H */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 8170905a0401..d8ab35175a53 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -42,20 +42,86 @@ enum { }; enum atmel_mci_state { - STATE_SENDING_CMD = 0, + STATE_IDLE = 0, + STATE_SENDING_CMD, STATE_SENDING_DATA, STATE_DATA_BUSY, STATE_SENDING_STOP, STATE_DATA_ERROR, }; +/** + * struct atmel_mci - MMC controller state shared between all slots + * @lock: Spinlock protecting the queue and associated data. + * @regs: Pointer to MMIO registers. + * @sg: Scatterlist entry currently being processed by PIO code, if any. + * @pio_offset: Offset into the current scatterlist entry. + * @cur_slot: The slot which is currently using the controller. + * @mrq: The request currently being processed on @cur_slot, + * or NULL if the controller is idle. + * @cmd: The command currently being sent to the card, or NULL. + * @data: The data currently being transferred, or NULL if no data + * transfer is in progress. + * @cmd_status: Snapshot of SR taken upon completion of the current + * command. Only valid when EVENT_CMD_COMPLETE is pending. + * @data_status: Snapshot of SR taken upon completion of the current + * data transfer. Only valid when EVENT_DATA_COMPLETE or + * EVENT_DATA_ERROR is pending. + * @stop_cmdr: Value to be loaded into CMDR when the stop command is + * to be sent. + * @tasklet: Tasklet running the request state machine. + * @pending_events: Bitmask of events flagged by the interrupt handler + * to be processed by the tasklet. + * @completed_events: Bitmask of events which the state machine has + * processed. + * @state: Tasklet state. + * @queue: List of slots waiting for access to the controller. + * @need_clock_update: Update the clock rate before the next request. + * @need_reset: Reset controller before next request. + * @mode_reg: Value of the MR register. + * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus + * rate and timeout calculations. + * @mapbase: Physical address of the MMIO registers. + * @mck: The peripheral bus clock hooked up to the MMC controller. + * @pdev: Platform device associated with the MMC controller. + * @slot: Slots sharing this MMC controller. + * + * Locking + * ======= + * + * @lock is a softirq-safe spinlock protecting @queue as well as + * @cur_slot, @mrq and @state. These must always be updated + * at the same time while holding @lock. + * + * @lock also protects mode_reg and need_clock_update since these are + * used to synchronize mode register updates with the queue + * processing. + * + * The @mrq field of struct atmel_mci_slot is also protected by @lock, + * and must always be written at the same time as the slot is added to + * @queue. + * + * @pending_events and @completed_events are accessed using atomic bit + * operations, so they don't need any locking. + * + * None of the fields touched by the interrupt handler need any + * locking. However, ordering is important: Before EVENT_DATA_ERROR or + * EVENT_DATA_COMPLETE is set in @pending_events, all data-related + * interrupts must be disabled and @data_status updated with a + * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the + * CMDRDY interupt must be disabled and @cmd_status updated with a + * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the + * bytes_xfered field of @data must be written. This is ensured by + * using barriers. + */ struct atmel_mci { - struct mmc_host *mmc; + spinlock_t lock; void __iomem *regs; struct scatterlist *sg; unsigned int pio_offset; + struct atmel_mci_slot *cur_slot; struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_data *data; @@ -64,25 +130,59 @@ struct atmel_mci { u32 data_status; u32 stop_cmdr; - u32 mode_reg; - u32 sdc_reg; - struct tasklet_struct tasklet; unsigned long pending_events; unsigned long completed_events; enum atmel_mci_state state; + struct list_head queue; - int present; - int detect_pin; - int wp_pin; - - /* For detect pin debouncing */ - struct timer_list detect_timer; - + bool need_clock_update; + bool need_reset; + u32 mode_reg; unsigned long bus_hz; unsigned long mapbase; struct clk *mck; struct platform_device *pdev; + + struct atmel_mci_slot *slot[ATMEL_MCI_MAX_NR_SLOTS]; +}; + +/** + * struct atmel_mci_slot - MMC slot state + * @mmc: The mmc_host representing this slot. + * @host: The MMC controller this slot is using. + * @sdc_reg: Value of SDCR to be written before using this slot. + * @mrq: mmc_request currently being processed or waiting to be + * processed, or NULL when the slot is idle. + * @queue_node: List node for placing this node in the @queue list of + * &struct atmel_mci. + * @clock: Clock rate configured by set_ios(). Protected by host->lock. + * @flags: Random state bits associated with the slot. + * @detect_pin: GPIO pin used for card detection, or negative if not + * available. + * @wp_pin: GPIO pin used for card write protect sending, or negative + * if not available. + * @detect_timer: Timer used for debouncing @detect_pin interrupts. + */ +struct atmel_mci_slot { + struct mmc_host *mmc; + struct atmel_mci *host; + + u32 sdc_reg; + + struct mmc_request *mrq; + struct list_head queue_node; + + unsigned int clock; + unsigned long flags; +#define ATMCI_CARD_PRESENT 0 +#define ATMCI_CARD_NEED_INIT 1 +#define ATMCI_SHUTDOWN 2 + + int detect_pin; + int wp_pin; + + struct timer_list detect_timer; }; #define atmci_test_and_clear_pending(host, event) \ @@ -98,14 +198,15 @@ struct atmel_mci { */ static int atmci_req_show(struct seq_file *s, void *v) { - struct atmel_mci *host = s->private; - struct mmc_request *mrq = host->mrq; + struct atmel_mci_slot *slot = s->private; + struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_command *stop; struct mmc_data *data; /* Make sure we get a consistent snapshot */ - spin_lock_irq(&host->mmc->lock); + spin_lock_bh(&slot->host->lock); + mrq = slot->mrq; if (mrq) { cmd = mrq->cmd; @@ -130,7 +231,7 @@ static int atmci_req_show(struct seq_file *s, void *v) stop->resp[2], stop->error); } - spin_unlock_irq(&host->mmc->lock); + spin_unlock_bh(&slot->host->lock); return 0; } @@ -193,12 +294,16 @@ static int atmci_regs_show(struct seq_file *s, void *v) if (!buf) return -ENOMEM; - /* Grab a more or less consistent snapshot */ - spin_lock_irq(&host->mmc->lock); + /* + * Grab a more or less consistent snapshot. Note that we're + * not disabling interrupts, so IMR and SR may not be + * consistent. + */ + spin_lock_bh(&host->lock); clk_enable(host->mck); memcpy_fromio(buf, host->regs, MCI_REGS_SIZE); clk_disable(host->mck); - spin_unlock_irq(&host->mmc->lock); + spin_unlock_bh(&host->lock); seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n", buf[MCI_MR / 4], @@ -236,13 +341,13 @@ static const struct file_operations atmci_regs_fops = { .release = single_release, }; -static void atmci_init_debugfs(struct atmel_mci *host) +static void atmci_init_debugfs(struct atmel_mci_slot *slot) { - struct mmc_host *mmc; - struct dentry *root; - struct dentry *node; + struct mmc_host *mmc = slot->mmc; + struct atmel_mci *host = slot->host; + struct dentry *root; + struct dentry *node; - mmc = host->mmc; root = mmc->debugfs_root; if (!root) return; @@ -254,7 +359,7 @@ static void atmci_init_debugfs(struct atmel_mci *host) if (!node) goto err; - node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops); + node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops); if (!node) goto err; @@ -275,8 +380,7 @@ static void atmci_init_debugfs(struct atmel_mci *host) return; err: - dev_err(&host->pdev->dev, - "failed to initialize debugfs for controller\n"); + dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); } static inline unsigned int ns_to_clocks(struct atmel_mci *host, @@ -286,7 +390,7 @@ static inline unsigned int ns_to_clocks(struct atmel_mci *host, } static void atmci_set_timeout(struct atmel_mci *host, - struct mmc_data *data) + struct atmel_mci_slot *slot, struct mmc_data *data) { static unsigned dtomul_to_shift[] = { 0, 4, 7, 8, 10, 12, 16, 20 @@ -309,7 +413,7 @@ static void atmci_set_timeout(struct atmel_mci *host, dtocyc = 15; } - dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n", + dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n", dtocyc << dtomul_to_shift[dtomul]); mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc))); } @@ -362,13 +466,12 @@ static u32 atmci_prepare_command(struct mmc_host *mmc, } static void atmci_start_command(struct atmel_mci *host, - struct mmc_command *cmd, - u32 cmd_flags) + struct mmc_command *cmd, u32 cmd_flags) { WARN_ON(host->cmd); host->cmd = cmd; - dev_vdbg(&host->mmc->class_dev, + dev_vdbg(&host->pdev->dev, "start command: ARGR=0x%08x CMDR=0x%08x\n", cmd->arg, cmd_flags); @@ -376,32 +479,19 @@ static void atmci_start_command(struct atmel_mci *host, mci_writel(host, CMDR, cmd_flags); } -static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data) +static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) { - struct atmel_mci *host = mmc_priv(mmc); - atmci_start_command(host, data->stop, host->stop_cmdr); mci_writel(host, IER, MCI_CMDRDY); } -static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq) -{ - struct atmel_mci *host = mmc_priv(mmc); - - WARN_ON(host->cmd || host->data); - host->mrq = NULL; - - mmc_request_done(mmc, mrq); -} - /* * Returns a mask of interrupt flags to be enabled after the whole * request has been prepared. */ -static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) +static u32 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data) { - struct atmel_mci *host = mmc_priv(mmc); - u32 iflags; + u32 iflags; data->error = -EINPROGRESS; @@ -409,10 +499,19 @@ static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) host->sg = NULL; host->data = data; - dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n", - MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); - iflags = ATMCI_DATA_ERROR_FLAGS; + + /* + * Errata: MMC data write operation with less than 12 + * bytes is impossible. + * + * Errata: MCI Transmit Data Register (TDR) FIFO + * corruption when length is not multiple of 4. + */ + if (data->blocks * data->blksz < 12 + || (data->blocks * data->blksz) & 3) + host->need_reset = true; + host->sg = data->sg; host->pio_offset = 0; if (data->flags & MMC_DATA_READ) @@ -423,62 +522,62 @@ static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) return iflags; } -static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +static void atmci_start_request(struct atmel_mci *host, + struct atmel_mci_slot *slot) { - struct atmel_mci *host = mmc_priv(mmc); - struct mmc_data *data; + struct mmc_request *mrq; struct mmc_command *cmd; + struct mmc_data *data; u32 iflags; - u32 cmdflags = 0; - - iflags = mci_readl(host, IMR); - if (iflags) - dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n", - mci_readl(host, IMR)); - - WARN_ON(host->mrq != NULL); - - /* - * We may "know" the card is gone even though there's still an - * electrical connection. If so, we really need to communicate - * this to the MMC core since there won't be any more - * interrupts as the card is completely removed. Otherwise, - * the MMC core might believe the card is still there even - * though the card was just removed very slowly. - */ - if (!host->present) { - mrq->cmd->error = -ENOMEDIUM; - mmc_request_done(mmc, mrq); - return; - } + u32 cmdflags; + mrq = slot->mrq; + host->cur_slot = slot; host->mrq = mrq; + host->pending_events = 0; host->completed_events = 0; - host->state = STATE_SENDING_CMD; - /* We don't support multiple blocks of weird lengths. */ + if (host->need_reset) { + mci_writel(host, CR, MCI_CR_SWRST); + mci_writel(host, CR, MCI_CR_MCIEN); + mci_writel(host, MR, host->mode_reg); + host->need_reset = false; + } + mci_writel(host, SDCR, slot->sdc_reg); + + iflags = mci_readl(host, IMR); + if (iflags) + dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", + iflags); + + if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) { + /* Send init sequence (74 clock cycles) */ + mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT); + while (!(mci_readl(host, SR) & MCI_CMDRDY)) + cpu_relax(); + } data = mrq->data; if (data) { - if (data->blocks > 1 && data->blksz & 3) - goto fail; - atmci_set_timeout(host, data); + atmci_set_timeout(host, slot, data); /* Must set block count/size before sending command */ mci_writel(host, BLKR, MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); + dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n", + MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); } iflags = MCI_CMDRDY; cmd = mrq->cmd; - cmdflags = atmci_prepare_command(mmc, cmd); + cmdflags = atmci_prepare_command(slot->mmc, cmd); atmci_start_command(host, cmd, cmdflags); if (data) - iflags |= atmci_submit_data(mmc, data); + iflags |= atmci_submit_data(host, data); if (mrq->stop) { - host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop); + host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop); host->stop_cmdr |= MCI_CMDR_STOP_XFER; if (!(data->flags & MMC_DATA_WRITE)) host->stop_cmdr |= MCI_CMDR_TRDIR_READ; @@ -495,65 +594,156 @@ static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) * prepared yet.) */ mci_writel(host, IER, iflags); +} - return; +static void atmci_queue_request(struct atmel_mci *host, + struct atmel_mci_slot *slot, struct mmc_request *mrq) +{ + dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n", + host->state); + + spin_lock_bh(&host->lock); + slot->mrq = mrq; + if (host->state == STATE_IDLE) { + host->state = STATE_SENDING_CMD; + atmci_start_request(host, slot); + } else { + list_add_tail(&slot->queue_node, &host->queue); + } + spin_unlock_bh(&host->lock); +} -fail: - host->mrq = NULL; - mrq->cmd->error = -EINVAL; - mmc_request_done(mmc, mrq); +static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct atmel_mci_slot *slot = mmc_priv(mmc); + struct atmel_mci *host = slot->host; + struct mmc_data *data; + + WARN_ON(slot->mrq); + + /* + * We may "know" the card is gone even though there's still an + * electrical connection. If so, we really need to communicate + * this to the MMC core since there won't be any more + * interrupts as the card is completely removed. Otherwise, + * the MMC core might believe the card is still there even + * though the card was just removed very slowly. + */ + if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) { + mrq->cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, mrq); + return; + } + + /* We don't support multiple blocks of weird lengths. */ + data = mrq->data; + if (data && data->blocks > 1 && data->blksz & 3) { + mrq->cmd->error = -EINVAL; + mmc_request_done(mmc, mrq); + } + + atmci_queue_request(host, slot, mrq); } static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { - struct atmel_mci *host = mmc_priv(mmc); + struct atmel_mci_slot *slot = mmc_priv(mmc); + struct atmel_mci *host = slot->host; + unsigned int i; - host->sdc_reg &= ~MCI_SDCBUS_MASK; + slot->sdc_reg &= ~MCI_SDCBUS_MASK; switch (ios->bus_width) { case MMC_BUS_WIDTH_1: - host->sdc_reg |= MCI_SDCBUS_1BIT; + slot->sdc_reg |= MCI_SDCBUS_1BIT; break; case MMC_BUS_WIDTH_4: - host->sdc_reg = MCI_SDCBUS_4BIT; + slot->sdc_reg = MCI_SDCBUS_4BIT; break; } if (ios->clock) { + unsigned int clock_min = ~0U; u32 clkdiv; - if (!host->mode_reg) + spin_lock_bh(&host->lock); + if (!host->mode_reg) { clk_enable(host->mck); + mci_writel(host, CR, MCI_CR_SWRST); + mci_writel(host, CR, MCI_CR_MCIEN); + } - /* Set clock rate */ - clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1; + /* + * Use mirror of ios->clock to prevent race with mmc + * core ios update when finding the minimum. + */ + slot->clock = ios->clock; + for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + if (host->slot[i] && host->slot[i]->clock + && host->slot[i]->clock < clock_min) + clock_min = host->slot[i]->clock; + } + + /* Calculate clock divider */ + clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; if (clkdiv > 255) { dev_warn(&mmc->class_dev, "clock %u too slow; using %lu\n", - ios->clock, host->bus_hz / (2 * 256)); + clock_min, host->bus_hz / (2 * 256)); clkdiv = 255; } + /* + * WRPROOF and RDPROOF prevent overruns/underruns by + * stopping the clock when the FIFO is full/empty. + * This state is not expected to last for long. + */ host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF | MCI_MR_RDPROOF; - mci_writel(host, CR, MCI_CR_MCIEN); - mci_writel(host, MR, host->mode_reg); - mci_writel(host, SDCR, host->sdc_reg); + if (list_empty(&host->queue)) + mci_writel(host, MR, host->mode_reg); + else + host->need_clock_update = true; + + spin_unlock_bh(&host->lock); } else { - mci_writel(host, CR, MCI_CR_MCIDIS); - if (host->mode_reg) { - mci_readl(host, MR); - clk_disable(host->mck); + bool any_slot_active = false; + + spin_lock_bh(&host->lock); + slot->clock = 0; + for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + if (host->slot[i] && host->slot[i]->clock) { + any_slot_active = true; + break; + } } - host->mode_reg = 0; + if (!any_slot_active) { + mci_writel(host, CR, MCI_CR_MCIDIS); + if (host->mode_reg) { + mci_readl(host, MR); + clk_disable(host->mck); + } + host->mode_reg = 0; + } + spin_unlock_bh(&host->lock); } switch (ios->power_mode) { + case MMC_POWER_UP: + set_bit(ATMCI_CARD_NEED_INIT, &slot->flags); + break; default: /* * TODO: None of the currently available AVR32-based * boards allow MMC power to be turned off. Implement * power control when this can be tested properly. + * + * We also need to hook this into the clock management + * somehow so that newly inserted cards aren't + * subjected to a fast clock before we have a chance + * to figure out what the maximum rate is. Currently, + * there's no way to avoid this, and there never will + * be for boards that don't support power control. */ break; } @@ -561,28 +751,77 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) static int atmci_get_ro(struct mmc_host *mmc) { - int read_only = 0; - struct atmel_mci *host = mmc_priv(mmc); + int read_only = -ENOSYS; + struct atmel_mci_slot *slot = mmc_priv(mmc); - if (gpio_is_valid(host->wp_pin)) { - read_only = gpio_get_value(host->wp_pin); + if (gpio_is_valid(slot->wp_pin)) { + read_only = gpio_get_value(slot->wp_pin); dev_dbg(&mmc->class_dev, "card is %s\n", read_only ? "read-only" : "read-write"); - } else { - dev_dbg(&mmc->class_dev, - "no pin for checking read-only switch." - " Assuming write-enable.\n"); } return read_only; } -static struct mmc_host_ops atmci_ops = { +static int atmci_get_cd(struct mmc_host *mmc) +{ + int present = -ENOSYS; + struct atmel_mci_slot *slot = mmc_priv(mmc); + + if (gpio_is_valid(slot->detect_pin)) { + present = !gpio_get_value(slot->detect_pin); + dev_dbg(&mmc->class_dev, "card is %spresent\n", + present ? "" : "not "); + } + + return present; +} + +static const struct mmc_host_ops atmci_ops = { .request = atmci_request, .set_ios = atmci_set_ios, .get_ro = atmci_get_ro, + .get_cd = atmci_get_cd, }; +/* Called with host->lock held */ +static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) + __releases(&host->lock) + __acquires(&host->lock) +{ + struct atmel_mci_slot *slot = NULL; + struct mmc_host *prev_mmc = host->cur_slot->mmc; + + WARN_ON(host->cmd || host->data); + + /* + * Update the MMC clock rate if necessary. This may be + * necessary if set_ios() is called when a different slot is + * busy transfering data. + */ + if (host->need_clock_update) + mci_writel(host, MR, host->mode_reg); + + host->cur_slot->mrq = NULL; + host->mrq = NULL; + if (!list_empty(&host->queue)) { + slot = list_entry(host->queue.next, + struct atmel_mci_slot, queue_node); + list_del(&slot->queue_node); + dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n", + mmc_hostname(slot->mmc)); + host->state = STATE_SENDING_CMD; + atmci_start_request(host, slot); + } else { + dev_vdbg(&host->pdev->dev, "list empty\n"); + host->state = STATE_IDLE; + } + + spin_unlock(&host->lock); + mmc_request_done(prev_mmc, mrq); + spin_lock(&host->lock); +} + static void atmci_command_complete(struct atmel_mci *host, struct mmc_command *cmd) { @@ -604,7 +843,7 @@ static void atmci_command_complete(struct atmel_mci *host, cmd->error = 0; if (cmd->error) { - dev_dbg(&host->mmc->class_dev, + dev_dbg(&host->pdev->dev, "command error: status=0x%08x\n", status); if (cmd->data) { @@ -618,81 +857,102 @@ static void atmci_command_complete(struct atmel_mci *host, static void atmci_detect_change(unsigned long data) { - struct atmel_mci *host = (struct atmel_mci *)data; - struct mmc_request *mrq = host->mrq; - int present; + struct atmel_mci_slot *slot = (struct atmel_mci_slot *)data; + bool present; + bool present_old; /* - * atmci_remove() sets detect_pin to -1 before freeing the - * interrupt. We must not re-enable the interrupt if it has - * been freed. + * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before + * freeing the interrupt. We must not re-enable the interrupt + * if it has been freed, and if we're shutting down, it + * doesn't really matter whether the card is present or not. */ smp_rmb(); - if (!gpio_is_valid(host->detect_pin)) + if (test_bit(ATMCI_SHUTDOWN, &slot->flags)) return; - enable_irq(gpio_to_irq(host->detect_pin)); - present = !gpio_get_value(host->detect_pin); + enable_irq(gpio_to_irq(slot->detect_pin)); + present = !gpio_get_value(slot->detect_pin); + present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags); - dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n", - present, host->present); + dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n", + present, present_old); - if (present != host->present) { - dev_dbg(&host->mmc->class_dev, "card %s\n", + if (present != present_old) { + struct atmel_mci *host = slot->host; + struct mmc_request *mrq; + + dev_dbg(&slot->mmc->class_dev, "card %s\n", present ? "inserted" : "removed"); - host->present = present; - /* Reset controller if card is gone */ - if (!present) { - mci_writel(host, CR, MCI_CR_SWRST); - mci_writel(host, IDR, ~0UL); - mci_writel(host, CR, MCI_CR_MCIEN); - } + spin_lock(&host->lock); + + if (!present) + clear_bit(ATMCI_CARD_PRESENT, &slot->flags); + else + set_bit(ATMCI_CARD_PRESENT, &slot->flags); /* Clean up queue if present */ + mrq = slot->mrq; if (mrq) { - /* - * Reset controller to terminate any ongoing - * commands or data transfers. - */ - mci_writel(host, CR, MCI_CR_SWRST); - mci_readl(host, SR); - - host->data = NULL; - host->cmd = NULL; - - switch (host->state) { - case STATE_SENDING_CMD: - mrq->cmd->error = -ENOMEDIUM; - if (!mrq->data) + if (mrq == host->mrq) { + /* + * Reset controller to terminate any ongoing + * commands or data transfers. + */ + mci_writel(host, CR, MCI_CR_SWRST); + mci_writel(host, CR, MCI_CR_MCIEN); + mci_writel(host, MR, host->mode_reg); + + host->data = NULL; + host->cmd = NULL; + + switch (host->state) { + case STATE_IDLE: break; - /* fall through */ - case STATE_SENDING_DATA: - mrq->data->error = -ENOMEDIUM; - break; - case STATE_DATA_BUSY: - case STATE_DATA_ERROR: - if (mrq->data->error == -EINPROGRESS) + case STATE_SENDING_CMD: + mrq->cmd->error = -ENOMEDIUM; + if (!mrq->data) + break; + /* fall through */ + case STATE_SENDING_DATA: mrq->data->error = -ENOMEDIUM; - if (!mrq->stop) break; - /* fall through */ - case STATE_SENDING_STOP: - mrq->stop->error = -ENOMEDIUM; - break; - } + case STATE_DATA_BUSY: + case STATE_DATA_ERROR: + if (mrq->data->error == -EINPROGRESS) + mrq->data->error = -ENOMEDIUM; + if (!mrq->stop) + break; + /* fall through */ + case STATE_SENDING_STOP: + mrq->stop->error = -ENOMEDIUM; + break; + } - atmci_request_end(host->mmc, mrq); + atmci_request_end(host, mrq); + } else { + list_del(&slot->queue_node); + mrq->cmd->error = -ENOMEDIUM; + if (mrq->data) + mrq->data->error = -ENOMEDIUM; + if (mrq->stop) + mrq->stop->error = -ENOMEDIUM; + + spin_unlock(&host->lock); + mmc_request_done(slot->mmc, mrq); + spin_lock(&host->lock); + } } + spin_unlock(&host->lock); - mmc_detect_change(host->mmc, 0); + mmc_detect_change(slot->mmc, 0); } } static void atmci_tasklet_func(unsigned long priv) { - struct mmc_host *mmc = (struct mmc_host *)priv; - struct atmel_mci *host = mmc_priv(mmc); + struct atmel_mci *host = (struct atmel_mci *)priv; struct mmc_request *mrq = host->mrq; struct mmc_data *data = host->data; struct mmc_command *cmd = host->cmd; @@ -700,9 +960,11 @@ static void atmci_tasklet_func(unsigned long priv) enum atmel_mci_state prev_state; u32 status; + spin_lock(&host->lock); + state = host->state; - dev_vdbg(&mmc->class_dev, + dev_vdbg(&host->pdev->dev, "tasklet: state %u pending/completed/mask %lx/%lx/%x\n", state, host->pending_events, host->completed_events, mci_readl(host, IMR)); @@ -711,6 +973,9 @@ static void atmci_tasklet_func(unsigned long priv) prev_state = state; switch (state) { + case STATE_IDLE: + break; + case STATE_SENDING_CMD: if (!atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) @@ -720,8 +985,8 @@ static void atmci_tasklet_func(unsigned long priv) atmci_set_completed(host, EVENT_CMD_COMPLETE); atmci_command_complete(host, mrq->cmd); if (!mrq->data || cmd->error) { - atmci_request_end(mmc, host->mrq); - break; + atmci_request_end(host, host->mrq); + goto unlock; } prev_state = state = STATE_SENDING_DATA; @@ -731,7 +996,7 @@ static void atmci_tasklet_func(unsigned long priv) if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { if (data->stop) - send_stop_cmd(host->mmc, data); + send_stop_cmd(host, data); state = STATE_DATA_ERROR; break; } @@ -754,15 +1019,15 @@ static void atmci_tasklet_func(unsigned long priv) status = host->data_status; if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) { if (status & MCI_DTOE) { - dev_dbg(&mmc->class_dev, + dev_dbg(&host->pdev->dev, "data timeout error\n"); data->error = -ETIMEDOUT; } else if (status & MCI_DCRCE) { - dev_dbg(&mmc->class_dev, + dev_dbg(&host->pdev->dev, "data CRC error\n"); data->error = -EILSEQ; } else { - dev_dbg(&mmc->class_dev, + dev_dbg(&host->pdev->dev, "data FIFO error (status=%08x)\n", status); data->error = -EIO; @@ -773,14 +1038,13 @@ static void atmci_tasklet_func(unsigned long priv) } if (!data->stop) { - atmci_request_end(mmc, host->mrq); - prev_state = state; - break; + atmci_request_end(host, host->mrq); + goto unlock; } prev_state = state = STATE_SENDING_STOP; if (!data->error) - send_stop_cmd(host->mmc, data); + send_stop_cmd(host, data); /* fall through */ case STATE_SENDING_STOP: @@ -790,9 +1054,8 @@ static void atmci_tasklet_func(unsigned long priv) host->cmd = NULL; atmci_command_complete(host, mrq->stop); - atmci_request_end(mmc, host->mrq); - prev_state = state; - break; + atmci_request_end(host, host->mrq); + goto unlock; case STATE_DATA_ERROR: if (!atmci_test_and_clear_pending(host, @@ -805,6 +1068,9 @@ static void atmci_tasklet_func(unsigned long priv) } while (state != prev_state); host->state = state; + +unlock: + spin_unlock(&host->lock); } static void atmci_read_data_pio(struct atmel_mci *host) @@ -854,9 +1120,11 @@ static void atmci_read_data_pio(struct atmel_mci *host) mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; + data->bytes_xfered += nbytes; + smp_wmb(); atmci_set_pending(host, EVENT_DATA_ERROR); tasklet_schedule(&host->tasklet); - break; + return; } } while (status & MCI_RXRDY); @@ -869,6 +1137,7 @@ done: mci_writel(host, IDR, MCI_RXRDY); mci_writel(host, IER, MCI_NOTBUSY); data->bytes_xfered += nbytes; + smp_wmb(); atmci_set_pending(host, EVENT_XFER_COMPLETE); } @@ -922,9 +1191,11 @@ static void atmci_write_data_pio(struct atmel_mci *host) mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; + data->bytes_xfered += nbytes; + smp_wmb(); atmci_set_pending(host, EVENT_DATA_ERROR); tasklet_schedule(&host->tasklet); - break; + return; } } while (status & MCI_TXRDY); @@ -937,29 +1208,26 @@ done: mci_writel(host, IDR, MCI_TXRDY); mci_writel(host, IER, MCI_NOTBUSY); data->bytes_xfered += nbytes; + smp_wmb(); atmci_set_pending(host, EVENT_XFER_COMPLETE); } -static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status) +static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status) { - struct atmel_mci *host = mmc_priv(mmc); - mci_writel(host, IDR, MCI_CMDRDY); host->cmd_status = status; + smp_wmb(); atmci_set_pending(host, EVENT_CMD_COMPLETE); tasklet_schedule(&host->tasklet); } static irqreturn_t atmci_interrupt(int irq, void *dev_id) { - struct mmc_host *mmc = dev_id; - struct atmel_mci *host = mmc_priv(mmc); + struct atmel_mci *host = dev_id; u32 status, mask, pending; unsigned int pass_count = 0; - spin_lock(&mmc->lock); - do { status = mci_readl(host, SR); mask = mci_readl(host, IMR); @@ -971,7 +1239,9 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS | MCI_RXRDY | MCI_TXRDY); pending &= mci_readl(host, IMR); + host->data_status = status; + smp_wmb(); atmci_set_pending(host, EVENT_DATA_ERROR); tasklet_schedule(&host->tasklet); } @@ -979,6 +1249,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY); host->data_status = status; + smp_wmb(); atmci_set_pending(host, EVENT_DATA_COMPLETE); tasklet_schedule(&host->tasklet); } @@ -988,18 +1259,15 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) atmci_write_data_pio(host); if (pending & MCI_CMDRDY) - atmci_cmd_interrupt(mmc, status); + atmci_cmd_interrupt(host, status); } while (pass_count++ < 5); - spin_unlock(&mmc->lock); - return pass_count ? IRQ_HANDLED : IRQ_NONE; } static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) { - struct mmc_host *mmc = dev_id; - struct atmel_mci *host = mmc_priv(mmc); + struct atmel_mci_slot *slot = dev_id; /* * Disable interrupts until the pin has stabilized and check @@ -1007,21 +1275,122 @@ static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) * middle of the timer routine when this interrupt triggers. */ disable_irq_nosync(irq); - mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20)); + mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20)); return IRQ_HANDLED; } +static int __init atmci_init_slot(struct atmel_mci *host, + struct mci_slot_pdata *slot_data, unsigned int id, + u32 sdc_reg) +{ + struct mmc_host *mmc; + struct atmel_mci_slot *slot; + + mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev); + if (!mmc) + return -ENOMEM; + + slot = mmc_priv(mmc); + slot->mmc = mmc; + slot->host = host; + slot->detect_pin = slot_data->detect_pin; + slot->wp_pin = slot_data->wp_pin; + slot->sdc_reg = sdc_reg; + + mmc->ops = &atmci_ops; + mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512); + mmc->f_max = host->bus_hz / 2; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + if (slot_data->bus_width >= 4) + mmc->caps |= MMC_CAP_4_BIT_DATA; + + mmc->max_hw_segs = 64; + mmc->max_phys_segs = 64; + mmc->max_req_size = 32768 * 512; + mmc->max_blk_size = 32768; + mmc->max_blk_count = 512; + + /* Assume card is present initially */ + set_bit(ATMCI_CARD_PRESENT, &slot->flags); + if (gpio_is_valid(slot->detect_pin)) { + if (gpio_request(slot->detect_pin, "mmc_detect")) { + dev_dbg(&mmc->class_dev, "no detect pin available\n"); + slot->detect_pin = -EBUSY; + } else if (gpio_get_value(slot->detect_pin)) { + clear_bit(ATMCI_CARD_PRESENT, &slot->flags); + } + } + + if (!gpio_is_valid(slot->detect_pin)) + mmc->caps |= MMC_CAP_NEEDS_POLL; + + if (gpio_is_valid(slot->wp_pin)) { + if (gpio_request(slot->wp_pin, "mmc_wp")) { + dev_dbg(&mmc->class_dev, "no WP pin available\n"); + slot->wp_pin = -EBUSY; + } + } + + host->slot[id] = slot; + mmc_add_host(mmc); + + if (gpio_is_valid(slot->detect_pin)) { + int ret; + + setup_timer(&slot->detect_timer, atmci_detect_change, + (unsigned long)slot); + + ret = request_irq(gpio_to_irq(slot->detect_pin), + atmci_detect_interrupt, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "mmc-detect", slot); + if (ret) { + dev_dbg(&mmc->class_dev, + "could not request IRQ %d for detect pin\n", + gpio_to_irq(slot->detect_pin)); + gpio_free(slot->detect_pin); + slot->detect_pin = -EBUSY; + } + } + + atmci_init_debugfs(slot); + + return 0; +} + +static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot, + unsigned int id) +{ + /* Debugfs stuff is cleaned up by mmc core */ + + set_bit(ATMCI_SHUTDOWN, &slot->flags); + smp_wmb(); + + mmc_remove_host(slot->mmc); + + if (gpio_is_valid(slot->detect_pin)) { + int pin = slot->detect_pin; + + free_irq(gpio_to_irq(pin), slot); + del_timer_sync(&slot->detect_timer); + gpio_free(pin); + } + if (gpio_is_valid(slot->wp_pin)) + gpio_free(slot->wp_pin); + + slot->host->slot[id] = NULL; + mmc_free_host(slot->mmc); +} + static int __init atmci_probe(struct platform_device *pdev) { struct mci_platform_data *pdata; - struct mci_slot_pdata *slot; - struct atmel_mci *host; - struct mmc_host *mmc; - struct resource *regs; - u32 sdc_reg; - int irq; - int ret; + struct atmel_mci *host; + struct resource *regs; + unsigned int nr_slots; + int irq; + int ret; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) @@ -1033,27 +1402,13 @@ static int __init atmci_probe(struct platform_device *pdev) if (irq < 0) return irq; - /* TODO: Allow using several slots at once */ - if (pdata->slot[0].bus_width) { - sdc_reg = MCI_SDCSEL_SLOT_A; - slot = &pdata->slot[0]; - } else if (pdata->slot[1].bus_width) { - sdc_reg = MCI_SDCSEL_SLOT_B; - slot = &pdata->slot[1]; - } else { - return -EINVAL; - } - - mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev); - if (!mmc) + host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL); + if (!host) return -ENOMEM; - host = mmc_priv(mmc); host->pdev = pdev; - host->mmc = mmc; - host->detect_pin = slot->detect_pin; - host->wp_pin = slot->wp_pin; - host->sdc_reg = sdc_reg; + spin_lock_init(&host->lock); + INIT_LIST_HEAD(&host->queue); host->mck = clk_get(&pdev->dev, "mci_clk"); if (IS_ERR(host->mck)) { @@ -1073,123 +1428,74 @@ static int __init atmci_probe(struct platform_device *pdev) host->mapbase = regs->start; - mmc->ops = &atmci_ops; - mmc->f_min = (host->bus_hz + 511) / 512; - mmc->f_max = host->bus_hz / 2; - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - if (slot->bus_width >= 4) - mmc->caps |= MMC_CAP_4_BIT_DATA; - - mmc->max_hw_segs = 64; - mmc->max_phys_segs = 64; - mmc->max_req_size = 32768 * 512; - mmc->max_blk_size = 32768; - mmc->max_blk_count = 512; - - tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc); + tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host); - ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc); + ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, host); if (ret) goto err_request_irq; - /* Assume card is present if we don't have a detect pin */ - host->present = 1; - if (gpio_is_valid(host->detect_pin)) { - if (gpio_request(host->detect_pin, "mmc_detect")) { - dev_dbg(&mmc->class_dev, "no detect pin available\n"); - host->detect_pin = -1; - } else { - host->present = !gpio_get_value(host->detect_pin); - } - } - - if (!gpio_is_valid(host->detect_pin)) - mmc->caps |= MMC_CAP_NEEDS_POLL; - - if (gpio_is_valid(host->wp_pin)) { - if (gpio_request(host->wp_pin, "mmc_wp")) { - dev_dbg(&mmc->class_dev, "no WP pin available\n"); - host->wp_pin = -1; - } - } - platform_set_drvdata(pdev, host); - mmc_add_host(mmc); - - if (gpio_is_valid(host->detect_pin)) { - setup_timer(&host->detect_timer, atmci_detect_change, - (unsigned long)host); - - ret = request_irq(gpio_to_irq(host->detect_pin), - atmci_detect_interrupt, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - "mmc-detect", mmc); - if (ret) { - dev_dbg(&mmc->class_dev, - "could not request IRQ %d for detect pin\n", - gpio_to_irq(host->detect_pin)); - gpio_free(host->detect_pin); - host->detect_pin = -1; - } + /* We need at least one slot to succeed */ + nr_slots = 0; + ret = -ENODEV; + if (pdata->slot[0].bus_width) { + ret = atmci_init_slot(host, &pdata->slot[0], + MCI_SDCSEL_SLOT_A, 0); + if (!ret) + nr_slots++; + } + if (pdata->slot[1].bus_width) { + ret = atmci_init_slot(host, &pdata->slot[1], + MCI_SDCSEL_SLOT_B, 1); + if (!ret) + nr_slots++; } - dev_info(&mmc->class_dev, - "Atmel MCI controller at 0x%08lx irq %d\n", - host->mapbase, irq); + if (!nr_slots) + goto err_init_slot; - atmci_init_debugfs(host); + dev_info(&pdev->dev, + "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", + host->mapbase, irq, nr_slots); return 0; +err_init_slot: + free_irq(irq, host); err_request_irq: iounmap(host->regs); err_ioremap: clk_put(host->mck); err_clk_get: - mmc_free_host(mmc); + kfree(host); return ret; } static int __exit atmci_remove(struct platform_device *pdev) { - struct atmel_mci *host = platform_get_drvdata(pdev); + struct atmel_mci *host = platform_get_drvdata(pdev); + unsigned int i; platform_set_drvdata(pdev, NULL); - if (host) { - /* Debugfs stuff is cleaned up by mmc core */ - - if (gpio_is_valid(host->detect_pin)) { - int pin = host->detect_pin; - - /* Make sure the timer doesn't enable the interrupt */ - host->detect_pin = -1; - smp_wmb(); - - free_irq(gpio_to_irq(pin), host->mmc); - del_timer_sync(&host->detect_timer); - gpio_free(pin); - } - - mmc_remove_host(host->mmc); - - clk_enable(host->mck); - mci_writel(host, IDR, ~0UL); - mci_writel(host, CR, MCI_CR_MCIDIS); - mci_readl(host, SR); - clk_disable(host->mck); + for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + if (host->slot[i]) + atmci_cleanup_slot(host->slot[i], i); + } - if (gpio_is_valid(host->wp_pin)) - gpio_free(host->wp_pin); + clk_enable(host->mck); + mci_writel(host, IDR, ~0UL); + mci_writel(host, CR, MCI_CR_MCIDIS); + mci_readl(host, SR); + clk_disable(host->mck); - free_irq(platform_get_irq(pdev, 0), host->mmc); - iounmap(host->regs); + free_irq(platform_get_irq(pdev, 0), host); + iounmap(host->regs); - clk_put(host->mck); + clk_put(host->mck); + kfree(host); - mmc_free_host(host->mmc); - } return 0; } -- cgit v1.2.2 From 65e8b083fc8ec303499baa1924ae032d46d29990 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 30 Jul 2008 20:29:03 +0200 Subject: atmel-mci: Add experimental DMA support This adds support for DMA transfers through the generic DMA engine framework with the DMA slave extensions. The driver has been tested using mmc-block and ext3fs on several SD, SDHC and MMC+ cards. Reads and writes work fine, with read transfer rates up to 7.5 MiB/s on fast cards with debugging disabled. Unfortunately, the driver has been known to lock up from time to time with DMA enabled, so DMA support is currently optional and marked EXPERIMENTAL. However, I didn't see any problems while testing 13 different cards (MMC, SD and SDHC of different brands and sizes), so I suspect the "Initialize BLKR before sending data transfer command" fix that was posted earlier fixed this as well. Signed-off-by: Haavard Skinnemoen --- arch/avr32/include/asm/atmel-mci.h | 4 + arch/avr32/mach-at32ap/at32ap700x.c | 16 +++ drivers/mmc/host/Kconfig | 11 ++ drivers/mmc/host/atmel-mci.c | 274 +++++++++++++++++++++++++++++++++--- 4 files changed, 289 insertions(+), 16 deletions(-) diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h index 5d5ae1295cfd..59f3fadd0b68 100644 --- a/arch/avr32/include/asm/atmel-mci.h +++ b/arch/avr32/include/asm/atmel-mci.h @@ -3,6 +3,8 @@ #define ATMEL_MCI_MAX_NR_SLOTS 2 +struct dma_slave; + /** * struct mci_slot_pdata - board-specific per-slot configuration * @bus_width: Number of data lines wired up the slot @@ -26,9 +28,11 @@ struct mci_slot_pdata { /** * struct mci_platform_data - board-specific MMC/SDcard configuration + * @dma_slave: DMA slave interface to use in data transfers, or NULL. * @slot: Per-slot configuration data. */ struct mci_platform_data { + struct dma_slave *dma_slave; struct mci_slot_pdata slot[ATMEL_MCI_MAX_NR_SLOTS]; }; diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 9967d5a3b6eb..f1b9a3ac2733 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1273,6 +1273,7 @@ struct platform_device *__init at32_add_device_mci(unsigned int id, struct mci_platform_data *data) { struct platform_device *pdev; + struct dw_dma_slave *dws; if (id != 0 || !data) return NULL; @@ -1289,6 +1290,21 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) ARRAY_SIZE(atmel_mci0_resource))) goto fail; + if (data->dma_slave) + dws = kmemdup(to_dw_dma_slave(data->dma_slave), + sizeof(struct dw_dma_slave), GFP_KERNEL); + else + dws = kzalloc(sizeof(struct dw_dma_slave), GFP_KERNEL); + + dws->slave.dev = &pdev->dev; + dws->slave.dma_dev = &dw_dmac0_device.dev; + dws->slave.reg_width = DMA_SLAVE_WIDTH_32BIT; + dws->cfg_hi = (DWC_CFGH_SRC_PER(0) + | DWC_CFGH_DST_PER(1)); + dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL + | DWC_CFGL_HS_SRC_POL); + + data->dma_slave = &dws->slave; if (platform_device_add_data(pdev, data, sizeof(struct mci_platform_data))) diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index ea8d7a3490d9..1ce21d4c8608 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -114,6 +114,17 @@ config MMC_ATMELMCI If unsure, say N. +config MMC_ATMELMCI_DMA + bool "Atmel MCI DMA support (EXPERIMENTAL)" + depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL + help + Say Y here to have the Atmel MCI driver use a DMA engine to + do data transfers and thus increase the throughput and + reduce the CPU utilization. Note that this is highly + experimental and may cause the driver to lock up. + + If unsure, say N. + config MMC_IMX tristate "Motorola i.MX Multimedia Card Interface support" depends on ARCH_IMX diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index d8ab35175a53..d45dfa259386 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -11,6 +11,8 @@ #include #include #include +#include +#include #include #include #include @@ -33,6 +35,7 @@ #include "atmel-mci-regs.h" #define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE) +#define ATMCI_DMA_THRESHOLD 16 enum { EVENT_CMD_COMPLETE = 0, @@ -50,6 +53,14 @@ enum atmel_mci_state { STATE_DATA_ERROR, }; +struct atmel_mci_dma { +#ifdef CONFIG_MMC_ATMELMCI_DMA + struct dma_client client; + struct dma_chan *chan; + struct dma_async_tx_descriptor *data_desc; +#endif +}; + /** * struct atmel_mci - MMC controller state shared between all slots * @lock: Spinlock protecting the queue and associated data. @@ -62,6 +73,8 @@ enum atmel_mci_state { * @cmd: The command currently being sent to the card, or NULL. * @data: The data currently being transferred, or NULL if no data * transfer is in progress. + * @dma: DMA client state. + * @data_chan: DMA channel being used for the current data transfer. * @cmd_status: Snapshot of SR taken upon completion of the current * command. Only valid when EVENT_CMD_COMPLETE is pending. * @data_status: Snapshot of SR taken upon completion of the current @@ -126,6 +139,9 @@ struct atmel_mci { struct mmc_command *cmd; struct mmc_data *data; + struct atmel_mci_dma dma; + struct dma_chan *data_chan; + u32 cmd_status; u32 data_status; u32 stop_cmdr; @@ -485,6 +501,144 @@ static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) mci_writel(host, IER, MCI_CMDRDY); } +#ifdef CONFIG_MMC_ATMELMCI_DMA +static void atmci_dma_cleanup(struct atmel_mci *host) +{ + struct mmc_data *data = host->data; + + dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len, + ((data->flags & MMC_DATA_WRITE) + ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); +} + +static void atmci_stop_dma(struct atmel_mci *host) +{ + struct dma_chan *chan = host->data_chan; + + if (chan) { + chan->device->device_terminate_all(chan); + atmci_dma_cleanup(host); + } else { + /* Data transfer was stopped by the interrupt handler */ + atmci_set_pending(host, EVENT_XFER_COMPLETE); + mci_writel(host, IER, MCI_NOTBUSY); + } +} + +/* This function is called by the DMA driver from tasklet context. */ +static void atmci_dma_complete(void *arg) +{ + struct atmel_mci *host = arg; + struct mmc_data *data = host->data; + + dev_vdbg(&host->pdev->dev, "DMA complete\n"); + + atmci_dma_cleanup(host); + + /* + * If the card was removed, data will be NULL. No point trying + * to send the stop command or waiting for NBUSY in this case. + */ + if (data) { + atmci_set_pending(host, EVENT_XFER_COMPLETE); + tasklet_schedule(&host->tasklet); + + /* + * Regardless of what the documentation says, we have + * to wait for NOTBUSY even after block read + * operations. + * + * When the DMA transfer is complete, the controller + * may still be reading the CRC from the card, i.e. + * the data transfer is still in progress and we + * haven't seen all the potential error bits yet. + * + * The interrupt handler will schedule a different + * tasklet to finish things up when the data transfer + * is completely done. + * + * We may not complete the mmc request here anyway + * because the mmc layer may call back and cause us to + * violate the "don't submit new operations from the + * completion callback" rule of the dma engine + * framework. + */ + mci_writel(host, IER, MCI_NOTBUSY); + } +} + +static int +atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) +{ + struct dma_chan *chan; + struct dma_async_tx_descriptor *desc; + struct scatterlist *sg; + unsigned int i; + enum dma_data_direction direction; + + /* + * We don't do DMA on "complex" transfers, i.e. with + * non-word-aligned buffers or lengths. Also, we don't bother + * with all the DMA setup overhead for short transfers. + */ + if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD) + return -EINVAL; + if (data->blksz & 3) + return -EINVAL; + + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 3 || sg->length & 3) + return -EINVAL; + } + + /* If we don't have a channel, we can't do DMA */ + chan = host->dma.chan; + if (chan) { + dma_chan_get(chan); + host->data_chan = chan; + } + + if (!chan) + return -ENODEV; + + if (data->flags & MMC_DATA_READ) + direction = DMA_FROM_DEVICE; + else + direction = DMA_TO_DEVICE; + + desc = chan->device->device_prep_slave_sg(chan, + data->sg, data->sg_len, direction, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + return -ENOMEM; + + host->dma.data_desc = desc; + desc->callback = atmci_dma_complete; + desc->callback_param = host; + desc->tx_submit(desc); + + /* Go! */ + chan->device->device_issue_pending(chan); + + return 0; +} + +#else /* CONFIG_MMC_ATMELMCI_DMA */ + +static int atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) +{ + return -ENOSYS; +} + +static void atmci_stop_dma(struct atmel_mci *host) +{ + /* Data transfer was stopped by the interrupt handler */ + atmci_set_pending(host, EVENT_XFER_COMPLETE); + mci_writel(host, IER, MCI_NOTBUSY); +} + +#endif /* CONFIG_MMC_ATMELMCI_DMA */ + /* * Returns a mask of interrupt flags to be enabled after the whole * request has been prepared. @@ -500,24 +654,27 @@ static u32 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data) host->data = data; iflags = ATMCI_DATA_ERROR_FLAGS; + if (atmci_submit_data_dma(host, data)) { + host->data_chan = NULL; - /* - * Errata: MMC data write operation with less than 12 - * bytes is impossible. - * - * Errata: MCI Transmit Data Register (TDR) FIFO - * corruption when length is not multiple of 4. - */ - if (data->blocks * data->blksz < 12 - || (data->blocks * data->blksz) & 3) - host->need_reset = true; + /* + * Errata: MMC data write operation with less than 12 + * bytes is impossible. + * + * Errata: MCI Transmit Data Register (TDR) FIFO + * corruption when length is not multiple of 4. + */ + if (data->blocks * data->blksz < 12 + || (data->blocks * data->blksz) & 3) + host->need_reset = true; - host->sg = data->sg; - host->pio_offset = 0; - if (data->flags & MMC_DATA_READ) - iflags |= MCI_RXRDY; - else - iflags |= MCI_TXRDY; + host->sg = data->sg; + host->pio_offset = 0; + if (data->flags & MMC_DATA_READ) + iflags |= MCI_RXRDY; + else + iflags |= MCI_TXRDY; + } return iflags; } @@ -848,6 +1005,7 @@ static void atmci_command_complete(struct atmel_mci *host, if (cmd->data) { host->data = NULL; + atmci_stop_dma(host); mci_writel(host, IDR, MCI_NOTBUSY | MCI_TXRDY | MCI_RXRDY | ATMCI_DATA_ERROR_FLAGS); @@ -917,6 +1075,7 @@ static void atmci_detect_change(unsigned long data) /* fall through */ case STATE_SENDING_DATA: mrq->data->error = -ENOMEDIUM; + atmci_stop_dma(host); break; case STATE_DATA_BUSY: case STATE_DATA_ERROR: @@ -995,6 +1154,7 @@ static void atmci_tasklet_func(unsigned long priv) case STATE_SENDING_DATA: if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { + atmci_stop_dma(host); if (data->stop) send_stop_cmd(host, data); state = STATE_DATA_ERROR; @@ -1280,6 +1440,60 @@ static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +#ifdef CONFIG_MMC_ATMELMCI_DMA + +static inline struct atmel_mci * +dma_client_to_atmel_mci(struct dma_client *client) +{ + return container_of(client, struct atmel_mci, dma.client); +} + +static enum dma_state_client atmci_dma_event(struct dma_client *client, + struct dma_chan *chan, enum dma_state state) +{ + struct atmel_mci *host; + enum dma_state_client ret = DMA_NAK; + + host = dma_client_to_atmel_mci(client); + + switch (state) { + case DMA_RESOURCE_AVAILABLE: + spin_lock_bh(&host->lock); + if (!host->dma.chan) { + host->dma.chan = chan; + ret = DMA_ACK; + } + spin_unlock_bh(&host->lock); + + if (ret == DMA_ACK) + dev_info(&host->pdev->dev, + "Using %s for DMA transfers\n", + chan->dev.bus_id); + break; + + case DMA_RESOURCE_REMOVED: + spin_lock_bh(&host->lock); + if (host->dma.chan == chan) { + host->dma.chan = NULL; + ret = DMA_ACK; + } + spin_unlock_bh(&host->lock); + + if (ret == DMA_ACK) + dev_info(&host->pdev->dev, + "Lost %s, falling back to PIO\n", + chan->dev.bus_id); + break; + + default: + break; + } + + + return ret; +} +#endif /* CONFIG_MMC_ATMELMCI_DMA */ + static int __init atmci_init_slot(struct atmel_mci *host, struct mci_slot_pdata *slot_data, unsigned int id, u32 sdc_reg) @@ -1434,6 +1648,25 @@ static int __init atmci_probe(struct platform_device *pdev) if (ret) goto err_request_irq; +#ifdef CONFIG_MMC_ATMELMCI_DMA + if (pdata->dma_slave) { + struct dma_slave *slave = pdata->dma_slave; + + slave->tx_reg = regs->start + MCI_TDR; + slave->rx_reg = regs->start + MCI_RDR; + + /* Try to grab a DMA channel */ + host->dma.client.event_callback = atmci_dma_event; + dma_cap_set(DMA_SLAVE, host->dma.client.cap_mask); + host->dma.client.slave = slave; + + dma_async_client_register(&host->dma.client); + dma_async_client_chan_request(&host->dma.client); + } else { + dev_notice(&pdev->dev, "DMA not available, using PIO\n"); + } +#endif /* CONFIG_MMC_ATMELMCI_DMA */ + platform_set_drvdata(pdev, host); /* We need at least one slot to succeed */ @@ -1462,6 +1695,10 @@ static int __init atmci_probe(struct platform_device *pdev) return 0; err_init_slot: +#ifdef CONFIG_MMC_ATMELMCI_DMA + if (pdata->dma_slave) + dma_async_client_unregister(&host->dma.client); +#endif free_irq(irq, host); err_request_irq: iounmap(host->regs); @@ -1490,6 +1727,11 @@ static int __exit atmci_remove(struct platform_device *pdev) mci_readl(host, SR); clk_disable(host->mck); +#ifdef CONFIG_MMC_ATMELMCI_DMA + if (host->dma.client.slave) + dma_async_client_unregister(&host->dma.client); +#endif + free_irq(platform_get_irq(pdev, 0), host); iounmap(host->regs); -- cgit v1.2.2 From ca55f46e13dd07b029b0a3d64637f983a6627b23 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Sun, 5 Oct 2008 15:16:59 +0200 Subject: atmel-mci: Don't overwrite error bits when NOTBUSY is set After a data error, we wait for the NOTBUSY bit to be set so that we can be sure the data transfer is completely finished. However, when NOTBUSY is set, the interrupt handler copies the contents of SR into data_status, overwriting any error bits we may have detected earlier. To avoid this, initialize data_status to 0 before starting a request, and don't overwrite it unless it still contains 0. Signed-off-by: Haavard Skinnemoen --- drivers/mmc/host/atmel-mci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index d45dfa259386..02529af7c747 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -694,6 +694,7 @@ static void atmci_start_request(struct atmel_mci *host, host->pending_events = 0; host->completed_events = 0; + host->data_status = 0; if (host->need_reset) { mci_writel(host, CR, MCI_CR_SWRST); @@ -1408,7 +1409,8 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) if (pending & MCI_NOTBUSY) { mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY); - host->data_status = status; + if (!host->data_status) + host->data_status = status; smp_wmb(); atmci_set_pending(host, EVENT_DATA_COMPLETE); tasklet_schedule(&host->tasklet); -- cgit v1.2.2 From 5e7184ae0dd49456387e8b1cdebc6b2c92fc6d51 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Sun, 5 Oct 2008 15:27:50 +0200 Subject: atmel-mci: Add missing flush_dcache_page() in PIO transfer code Signed-off-by: Haavard Skinnemoen --- drivers/mmc/host/atmel-mci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 02529af7c747..7a3f2436b011 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1253,6 +1253,7 @@ static void atmci_read_data_pio(struct atmel_mci *host) nbytes += 4; if (offset == sg->length) { + flush_dcache_page(sg_page(sg)); host->sg = sg = sg_next(sg); if (!sg) goto done; -- cgit v1.2.2