aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/davinci/davinci-i2s.c
Commit message (Collapse)AuthorAge
* ASoC: DaVinci: pcm, fix underrun by using sramTroy Kisky2009-11-19
| | | | | | | | | | | | Fix underruns by using dma to copy 1st to sram in a ping/pong buffer style and then copying from the sram to the ASP. This also has the advantage of tolerating very long interrupt latency on dma completion. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: i2s, reduce underruns by combining into 1 elementTroy Kisky2009-11-19
| | | | | | | | | Allow the left and right 16 bit samples to be shifted out as 1 32 bit sample. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: remove requirement that dma_params is 1st in structureTroy Kisky2009-11-18
| | | | | | | | | Remove requirement that dma_params is 1st in the structures davinci_audio_dev and davinci_mcbsp_dev. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: McASP FIFO related updatesChaithrika U S2009-09-30
| | | | | | | | | | | The DMA params for McASP with FIFO has been updated so that it works for various FIFO levels. A member- 'fifo_level' has been added to the DMA params data structure. The fifo_level can be adjusted by the tx[rx]_numevt platform data. This is relevant only for DA8xx/OMAP-L1xx platforms. This implementation has been tested for numevt values 1, 2, 4, 8. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Davinci: Fix race with cpu_dai->dma_dataTroy Kisky2009-09-23
| | | | | | | | | | | This patch removes references to cpu_dai->dma_data. It makes struct davinci_pcm_dma_params part of struct davinci_mcbsp_dev or struct davinci_audio_dev. It removes the unused name variable from davinci_pcm_dma_params. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: Fix divide by zero error during 1st executionTroy Kisky2009-09-23
| | | | | | | | | | | | When both playback and capture stream were open davinci_i2s_hw_params was setting parameters for the wrong stream. The fix for davinci_i2s_hw_params is sufficient, but it looks like a race still happens in davici_pcm_open. This patch also makes the race smaller but the next patch provides a better fix. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: McASP driver enhacementsChaithrika U S2009-08-13
| | | | | | | | | | | | | | | | | | On DA830/OMAP-L137 and DA850/OMAP-L138 SoCs, the McASP peripheral has FIFO support. This FIFO provides additional data buffering. It also provides tolerance to variation in host/DMA controller response times. The read and write FIFO sizes are 256 bytes each. If FIFO is enabled, the DMA events from McASP are sent to the FIFO which in turn sends DMA requests to the host CPU according to the thresholds programmed. More details of the FIFO operation can be found at http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber= sprufm1&fileType=pdf This patch adds support for FIFO configuration. The platform data has a version field which differentiates the McASP on different SoCs. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: i2s: don't bounce through rtd to get daiTroy Kisky2009-08-07
| | | | | | | | dai is a parameter to the functions, so use it instead of looking it up. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: davinci: don't use clock namesKevin Hilman2009-07-16
| | | | | | | | clock name strings are no longer passed on platform_data. Instead, we rely entirely on struct device and clkdev to find the right clock. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci I2S needs mach/asp.hMark Brown2009-07-08
| | | | | Reported-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge branch 'davinci' into for-2.6.32Mark Brown2009-07-07
|\ | | | | | | | | Conflicts: sound/soc/davinci/davinci-i2s.c
| * ASoC: Minor fixes to DaVinci I2S probe functionChaithrika U S2009-06-08
| | | | | | | | | | | | | | Assign proper errors when platform resource claims fail. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Introduce platform driver model for dm644x, dm355Chaithrika U S2009-06-07
| | | | | | | | | | | | | | | | | | | | Introduce the platform driver model to get platform data for dm355 and dm644x. Register platform driver and acquire the resources in the probe function Since the platform specific code had been moved from machine driver to dm<soc>.c Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: DaVinci: i2s, add davinci_i2s_prepare and shutdownTroy Kisky2009-07-05
| | | | | | | | | | | | | | | | If the codec is master then prepare should call mcbsp_start, not trigger. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: DaVinci: i2s, fix mcbsp_word_length updateTroy Kisky2009-07-05
| | | | | | | | | | | | | | | | Code previously just "ors" in this field without clearing first. Fix, by never reading this register. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: DaVinci: i2s, minor cleanup of davinci_i2s_startupTroy Kisky2009-07-05
| | | | | | | | | | | | | | Save a few lines of code. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: DaVinci: i2s, only start sample generator if neededTroy Kisky2009-07-05
| | | | | | | | | | | | | | | | Only start sample generator if needed, and more cleanup on davinci_mcbsp_start. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: DaVinci: i2s cleanupTroy Kisky2009-07-05
| | | | | | | | | | | | | | Move variable declaration closer to use. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoc: DaVinci: i2s, minor cleanupTroy Kisky2009-07-05
| | | | | | | | | | | | | | | | Add davinci_mcbsp_dev as argument to davinci_mcbsp_start and davinci_mcbsp_stop. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: DaVinci: i2s toggle clock to complete resetTroy Kisky2009-07-05
| | | | | | | | | | | | | | Add toggle_clock function to complete i2s reset earlier. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: DaVinci: i2s, remove MOD_REG_BIT macroTroy Kisky2009-07-05
|/ | | | | | | | No functional changes. Rename variable w to something more meaningful. Remove code obfuscating macro MOD_REG_BIT. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci I2S updatesDavid Brownell2009-05-15
| | | | | | | | | | | This resyncs the DaVinci I2S code with the version in the DaVinci tree. The behavioral change uses updated clock interfaces which recently merged to mainline. Two other changes include adding a comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in order to support more boards than just the DM644x EVM. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: make ops a pointer in 'struct snd_soc_dai'Eric Miao2009-03-04
| | | | | | | | | | | | | | | | Considering the fact that most cpu_dai or codec_dai are using a same 'snd_soc_dai_ops' for several similar interfaces, 'ops' would be better made a pointer instead, to make sharing easier and code a bit cleaner. The patch below is rather preliminary since the asoc tree is being actively developed, and this touches almost every piece of code, (and possibly many others in development need to be changed as well). Building of all codecs are OK, yet to every SoC, I didn't test that. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ALSA: ASoC: DaVinci: i2s, evm, pass same value to codec and cpu_daiTroy Kisky2008-12-20
| | | | | | | | Fix the meaning of SND_SOC_DAIFMT_NB_NF to match that used in the codec. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ALSA: ASoC: DaVinci: document I2S limitationsTroy Kisky2008-12-20
| | | | | | | | | | | DaVinci does not support true I2S or right justified mode so not all I2S codecs will work with it when the codec is master. Document this limitation. Add dsp_a, dsp_b mode options Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ALSA: ASoC: DaVinci: davinci-i2s clean upTroy Kisky2008-12-20
| | | | | | | Minor, just move a block of code to make next patch clearer. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ALSA: ASoC: DaVinci: davinci-i2s clean upTroy Kisky2008-12-20
| | | | | | | Just at little cleanup of davinci_i2s_set_dai_fmt Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ALSA: ASoC: DaVinci: davinci-i2s add comments to explain polarityTroy Kisky2008-12-20
| | | | | | | Document the current polarity choices. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ALSA: ASoC - Fix wrong section typesTakashi Iwai2008-12-10
| | | | | | The module init entries should be __init instead of __devinit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ASoC: Register platform DAIsMark Brown2008-12-09
| | | | | | | | | | | Register all platform DAIs with the core. In line with current behaviour this is done at module probe time rather than when the devices are probed (since currently that only happens as the entire ASoC card is registered except for those drivers that currently implement some kind of hotplug). Since the core currently ignores DAI registration this has no practical effect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Push platform registration down into the cardMark Brown2008-12-02
| | | | | | | As part of the deprecation of snd_soc_device push the registration of the platform down into the card structure. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Remove DAI type informationMark Brown2008-11-24
| | | | | | | | | | | DAI type information is only ever used within ASoC in order to special case AC97 and for diagnostic purposes. Since modern CPUs and codecs support multi function DAIs which can be configured for several modes it is more trouble than it's worth to maintain anything other than a flag identifying AC97 DAIs so remove the type field and replace it with an ac97_control flag. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Merge snd_soc_ops into snd_soc_dai_opsMark Brown2008-11-21
| | | | | | | | | | | | | Liam Girdwood's ASoC v2 work avoids having two different ops structures for DAIs by merging the members of struct snd_soc_ops into struct snd_soc_dai_ops, allowing per DAI configuration for everything. Backport this change. This paves the way for future work allowing any combination of DAIs to be connected rather than having fixed purpose CODEC and CPU DAIs and only allowing CODEC<->CPU interconnections. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Rename snd_soc_card to snd_soc_machineMark Brown2008-11-21
| | | | | | | | | | | | | | | | | One of the issues with the ASoC v1 API which has been addressed in the ASoC v2 work that Liam Girdwood has done is that the ALSA card provided by ASoC is distributed around the ASoC structures. For example, machine wide data such as the struct snd_card are maintained as part of the CODEC data structure, preventing the use of multiple codecs. This has been addressed by refactoring the data structures so that all the data for the ALSA card is contained in a single structure snd_soc_card which replaces the existing snd_soc_machine and snd_soc_device. Begin the process of backporting this by renaming struct snd_soc_machine to struct snd_soc_card, better reflecting its function and bringing it closer to standard ALSA terminology. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: Fix audio stall when doing full duplexNaresh Medisetty2008-11-18
| | | | | | | | | | Fix concurrent capture/playback issue. The issue is caused by re-initialization of control registers used specifically for capture or playback in both capture and playback operations. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: DaVinci: Audio: Fix swapping of channels at start of stereo playbackNaresh Medisetty2008-11-12
| | | | | | | | | | Fixes swapping of channels at start of stereo playback. Channel swap can be observed while playing left-only or right-only audio data. The channel swap is fixed by handling the XSYNCERR condition. Signed-off-by: Naresh Medisetty <naresh@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Add Right-Justified mode and Codec clock master to davinci-i2sHugo Villeneuve2008-11-10
| | | | | | | | The TI DVEVM board uses the SND_SOC_DAIFMT_CBM_CFM & I2S formats, but the Lyrtech SFFSDR board uses the SND_SOC_DAIFMT_CBM_CFS & RIGHT-JUSTIFIED formats. Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ALSA: Correct Vladimir Barinov's e-mail addressVladimir Barinov2008-10-10
| | | | | Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: ASoC: Add missing new-line at end of stringsJean Delvare2008-08-29
| | | | | | | | Two warning messages lack their trailing new-line, add it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: asoc: davinci - merge structs snd_soc_codec_dai and snd_soc_cpu_dai.Liam Girdwood2008-07-10
| | | | | | | | | This patch merges struct snd_soc_codec_dai and struct snd_soc_cpu_dai into struct snd_soc_dai for the DaVinci platform. Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: ASoC: Pass the DAI being configured into CPU DAI probe and removeMark Brown2008-06-13
| | | | | | | | This allows per-DAI initialisation to be done by the CPU DAI drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] Davinci ASoC supportVladimir Barinov2008-04-24
Add ASoC support for the TI Davinci SoC and the Davicni-EVM reference board. It includes: - ASoC Davinci DMA driver - ASoC Davinci I2S (Davinci McBSP module based) driver - ASoC Davinci-EVM reference board Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>