aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
Commit message (Collapse)AuthorAge
...
| | | | | * | | | | | | | | | | ASoC: tlv320aic3x: Remove unnecessary suspend/resume bias level changesLars-Peter Clausen2014-09-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ASoC core will only call the suspend/resume callbacks when the device's DAPM context is idle. Since this driver sets idle_bias_off to true this means that the device is already in SND_SOC_BIAS_OFF when the suspend callback is called, so there is no need to manually set this state again. There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback since the core will go right back to SND_SOC_BIAS_OFF. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | | | | | | | | | | ASoC: lm49453: Remove unnecessary suspend/resume bias level changesLars-Peter Clausen2014-09-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ASoC core will only call the suspend/resume callbacks when the device's DAPM context is idle. Since this driver sets idle_bias_off to true this means that the device is already in SND_SOC_BIAS_OFF when the suspend callback is called, so there is no need to manually set this state again. There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback since the core will go right back to SND_SOC_BIAS_OFF. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | * | | | | | | | | | | ASoC: adau1373: Remove unnecessary suspend/resume bias level changesLars-Peter Clausen2014-09-03
| | |_|_|/ / / / / / / / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ASoC core will only call the suspend/resume callbacks when the device's DAPM context is idle. Since this driver sets idle_bias_off to true this means that the device is already in SND_SOC_BIAS_OFF when the suspend callback is called, so there is no need to manually set this state again. There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback since the core will go right back to SND_SOC_BIAS_OFF. Also drop the regcache_cache_only() calls from the suspend and resume handlers. There shouldn't be any IO happening after suspend and before resume. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | * | | | | | | | | | | ASoC: es8328: fix error return code in es8328_codec_probe()Wei Yongjun2014-09-01
| | | | |/ / / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | / / / / / / ASoC: Remove return value checking for gpiochip_remove()Axel Lin2014-09-17
| | | | |_|_|_|/ / / / / / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gpiochip_remove() will return void eventually. Thus this patch removes return value checking for gpiochip_remove(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | | | | ASoC: rt5677: Add the GPIO functionOder Chiou2014-09-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds the GPIO function. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | | | | ASoC: rt5677: Revise the wrong name in the header fileOder Chiou2014-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch revises the wrong name in the header file. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | | | | ASoC: rt5677: Add DMIC2 clock selectionBard Liao2014-08-27
| | |/ / / / / / / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two pins can be used for rt5677's DMIC2 clock. This patch add the select options for it. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | * | | | | | | | | | ASoC: dmic: Add to SND_SOC_ALL_CODECSLars-Peter Clausen2014-08-17
| |/ / / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve build coverage of the dmic driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
| | | | | | | | | | |
| \ \ \ \ \ \ \ \ \ \
| \ \ \ \ \ \ \ \ \ \
| \ \ \ \ \ \ \ \ \ \
| \ \ \ \ \ \ \ \ \ \
| \ \ \ \ \ \ \ \ \ \
*-----. \ \ \ \ \ \ \ \ \ \ Merge remote-tracking branches 'asoc/topic/cs4265', 'asoc/topic/cs42l52', ↵Mark Brown2014-10-06
|\ \ \ \ \ \ \ \ \ \ \ \ \ \ | | | | |_|_|_|_|_|_|_|/ / / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | 'asoc/topic/cs42l56' and 'asoc/topic/da732x' into asoc-next
| | | | * | | | | | | | | | ASoC: da732x: Remove unnecessary KERN_ERR in pr_err()Masanari Iida2014-10-04
| | | | |/ / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch remove unnecessary KERN_ERR in pr_err(). Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | | | | ASoC: cs42l56: Remove unneeded regulator_bulk_free call in cs42l56_removeAxel Lin2014-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The regulator_bulk_free() call is not required because current code is using devm_regulator_bulk_get(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | | * | | | | | | | | | ASoC: cs42l56: use true/false returns for bool functionsBrian Austin2014-08-28
| | | |/ / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return true or false instead of 1 and 0 Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | * / / / / / / / / / ASoC: cs42l52: use true/false returns for bool functionsBrian Austin2014-08-28
| | |/ / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return true or false instead of 1 and 0 Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| * / / / / / / / / / ASoC: cs4265: Add CHIP_ID as a readable registerPaul Handrigan2014-08-28
| |/ / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported-by: Zoltán Szenczi <zoltan@raspberrypi.org> Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | | | | | | | | |
| \ \ \ \ \ \ \ \ \
| \ \ \ \ \ \ \ \ \
| \ \ \ \ \ \ \ \ \
*---. \ \ \ \ \ \ \ \ \ Merge remote-tracking branches 'asoc/topic/ab8500', 'asoc/topic/ac97' and ↵Mark Brown2014-10-06
|\ \ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'asoc/topic/cs35l32' into asoc-next
| | | * | | | | | | | | | ASoC: cs35l32: remove second linux/slab.h inclusionFabian Frederick2014-09-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | linux/slab.h was included twice. Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | | | | | | | | ASoC: cs35l32: Simplify implementation of cs35l32_codec_set_sysclkAxel Lin2014-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use single snd_soc_update_bits() call to update the register bits. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Brian Austin <brian.austin@cirrus.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | | * | | | | | | | | | ASoC: cs35l32: Remove unneeded regulator_bulk_free call in cs35l32_i2c_removeAxel Lin2014-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The regulator_bulk_free() call is not required because current code is using devm_regulator_bulk_get(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | | * | | | | | | | | | ASoC: cs35l32: use true/false returns for bool functionsBrian Austin2014-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return true or false instead of 1 and 0 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | | * | | | | | | | | | ASoC: cs35l32: fix compile warning for i2c_probeBrian Austin2014-08-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Forgot to add a return for err_disable goto statement. Causes compile warning of control reaching end of non-void Signed-off-by: Brian Austin <briann.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | | * | | | | | | | | | ASoC: cs35l32: Add support for CS35L32 Boosted AmplifierBrian Austin2014-08-16
| | | |/ / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Cirrus Logic CS35L32 Boosted Amplifier I2S output provides monitor data to the SOC/CODEC/DSP for speaker protection/enhancement algorithms Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | * / / / / / / / / / ASoC: ac97-codec: Remove ASoC level IO supportLars-Peter Clausen2014-08-23
| | |/ / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver doesn't use any ASoC level IO nor does it register any controls or DAPM elements that require it. This means it can safely be removed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
| * | | | | | | | | | ASoC: ab8500-codec: Revert back to regmapLars-Peter Clausen2014-09-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit ff795d614bfa ("ASoC: ab8500: Convert register I/O to regmap") initially converted the ab8500 CODEC driver to use regmap rather than legacy ASoC IO. This was reverted though in commit 63e6d43bf80d ("ASoC: ab8500: Revert to using custom I/O functions") since the inital conversion was not working properly. This was presumebly because the SOC_SINGLE_XR_SX controls, which are used by this driver, did not properly support regmap at that point. This has since been fixed in commit 6137a5ca326d ("ASoC: Prepare SOC_SINGLE_XR_SX controls for regmap"). So revert back to regmap again. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | | | | | | ASoC: ab8500-codec: Drop bank prefix from AB8500_GPIO_DIR4_REG register defineLars-Peter Clausen2014-08-17
| |/ / / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AB8500_GPIO_DIR4_REG register define has the bank for the register in the upper 8 bits and the register itself in the lower 8 bits. When passing it to abx500_{set,get}_register_interruptible() the upper bits get truncated which generates the following warning from sparse: sound/soc/codecs/ab8500-codec.c:1972:53: warning: cast truncates bits from constant value (1013 becomes 13) sound/soc/codecs/ab8500-codec.c:1980:53: warning: cast truncates bits from constant value (1013 becomes 13) The bank is passed separately to abx500_{set,get}_register_interruptible() so the code works fine as it is. Given that all users of AB8500_GPIO_DIR4_REG always truncate the upper 8 bits just remove them from the define. Also remove the unnecessary casts to u8. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* | | | | | | | | | Merge remote-tracking branch 'asoc/topic/fsl-esai' into asoc-nextMark Brown2014-10-06
|\ \ \ \ \ \ \ \ \ \ | | |/ / / / / / / / | |/| | | | | | | |
| * | | | | | | | | ASoC: add es8328 codec driverSean Cross2014-08-16
| |/ / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a codec driver for the Everest ES8328. It supports two separate audio outputs and two separate audio inputs. Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* | | | | | | | | Merge remote-tracking branch 'asoc/topic/component' into asoc-nextMark Brown2014-10-06
|\ \ \ \ \ \ \ \ \
| * | | | | | | | | ASoC: wm8{350,753,971}: Use snd_soc_dapm_to_codec() instead of dapm->codecLars-Peter Clausen2014-09-29
| |/ / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CODEC struct in the snd_soc_dapm_context struct is deprecated and scheduled for removal. Use the snd_soc_dapm_to_codec() function instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | | | | | | |
| \ \ \ \ \ \ \ \
*-. \ \ \ \ \ \ \ \ Merge remote-tracking branches 'asoc/fix/davinci' and 'asoc/fix/max98090' ↵Mark Brown2014-10-06
|\ \ \ \ \ \ \ \ \ \ | | |/ / / / / / / / | |/| | / / / / / / | | | |/ / / / / / | | |/| | | | | | into asoc-linus
| | * | | | | | | ASoC: max98090: Enable both DMIC channels also when using mono configurationJarkko Nikula2014-09-28
| | | |/ / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to MAX98090 specification "Digital microphone clock (DMC) is enabled once both data channels are enabled.". Therefore both digital microphone data channels must be enabled also when using mono microphone configuration. Fix this by moving "DMICL_ENA" and "DMICR_ENA" supply widgets from "DMICL" and "DMICR" inputs to "DMIC Mux" in order to enable both data channels whenever there is active mono or stereo digital microphone input path. Use of "DMICL" and "DMICR" inputs are retained for informative source and in case the driver would find use for exact digital microphone configuration in the future. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | | | | | | | Merge tag 'asoc-v3.17-rc4' into asoc-linusMark Brown2014-10-06
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ASoC: Fixes for v3.17 Another round of again fairly unexciting fixes - several driver fixes, an e-mail address change and a fix for error handling with DPCM. # gpg: Signature made Wed 10 Sep 2014 12:26:54 BST using RSA key ID 5D5487D0 # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
| | \ \ \ \ \ \ \
| | \ \ \ \ \ \ \
| | \ \ \ \ \ \ \
| | \ \ \ \ \ \ \
| *---. \ \ \ \ \ \ \ Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/max98090', ↵Mark Brown2014-09-10
| |\ \ \ \ \ \ \ \ \ \ | | | |_|/ / / / / / / | | |/| | / / / / / / | | | | |/ / / / / / | | | |/| | | | / / | | | | | |_|_|/ / | | | | |/| | | | 'asoc/fix/samsung' and 'asoc/fix/tlv320aic31xx' into asoc-linus
| | | * / | | | | ASoC: max98090: Add recovery for PLL lock failureJarkko Nikula2014-09-03
| | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All MAX98090 input clocks MCLK, LRCLK and BCLK must be running and stable before powering on the codec in slave mode. Otherwise the PLL may not lock to LRCLK causing silence in playback and capture. How often that happens is somewhat hardware and clock configuration specific. Now if wanting to follow strictly this clocks must be active before powering the codec on requirement we should have a notification from DAI driver to codec driver when clocks are activated and take codec out of shutdown only after that. Plus take care of possible active bypass paths. However, when PLL unlock occurs, MAX98090 asserts the PLL Unlock Flag which can be configured as an IRQ source. This allows to workaround around the issue by toggling the codec power shortly in case of PLL lock failure. In order to prevent needlessly toggling codec power in case of short PLL unlocks at the beginning of stream this patch implements delayed activation for PLL unlock interrupt. Then workaround is run only when the PLL doesn't lock at all. Power toggling workaround for PLL unlock comes originally from Liam Girdwood <liam.r.girdwood@linux.intel.com> and delayed activation from me. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | | | | | | Merge remote-tracking branch 'asoc/fix/core' into asoc-linusMark Brown2014-09-10
| |\ \ \ \ \ \ \ | | |_|_|_|/ / / | |/| | | | | |
* | | | | | | | Merge tag 'asoc-v3.17-rc7' of ↵Takashi Iwai2014-10-01
|\ \ \ \ \ \ \ \ | | |_|_|_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fix SSM2602 device identification Another fix for v3.17, fixing device identification after the split out of the I2C and SPI code.
| * | | | | | | ASoC: ssm2602: do not hardcode type to SSM2602Stefan Kristiansson2014-09-30
| | |_|/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The correct type (SSM2602/SSM2603/SSM2604) is passed down from the ssm2602_spi_probe()/ssm2602_spi_probe() functions, so use that instead of hardcoding it to SSM2602 in ssm2602_probe(). Fixes: c924dc68f737 ("ASoC: ssm2602: Split SPI and I2C code into different modules") Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@vger.kernel.org
| | | | | | |
| \ \ \ \ \ \
*-. \ \ \ \ \ \ Merge remote-tracking branches 'asoc/fix/atmel', 'asoc/fix/compress', ↵Mark Brown2014-09-28
|\ \ \ \ \ \ \ \ | |_|/ / / / / / |/| | | | | | | | | | | | | | | 'asoc/fix/core', 'asoc/fix/fsl-ssi' and 'asoc/fix/rt286' into asoc-linus
| | * | | | | | ASoC: rt286: Fix sync functionBard Liao2014-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We try to write index registers into cache when we write an index register, but we change the reg value before updating the cache. As a result, the cache is never be updated. This patch will fix this issue. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| | * | | | | | ASoC: rt286: Correct default valueBard Liao2014-09-26
| |/ / / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects some incorrect default value in the cache. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| | | | | | |
| | \ \ \ \ \
| | \ \ \ \ \
| | \ \ \ \ \
| *---. \ \ \ \ \ Merge remote-tracking branches 'asoc/fix/cs4265', 'asoc/fix/davinci', ↵Mark Brown2014-09-15
| |\ \ \ \ \ \ \ \ | |_|/ / / / / / / |/| | | | | / / / | | | | |_|/ / / | | | |/| | | | 'asoc/fix/rockchip', 'asoc/fix/samsung' and 'asoc/fix/tlv320aic31xx' into asoc-linus
| | | * | | | | ASoC: tlv320aic31xx: Fix 24bit samples with I2S format and 12MHz mclkJyri Sarha2014-09-03
| |_|/ / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I2S format requires bitclock to have an exact amount of cycles in a frame for audio to work cleanly. With dsp formats that is not so important. Updates aic31xx_setup_pll() to look for a line in aic31xx_divs table that produces the best match for the bitclock and adds lines to aic31xx_divs for 12MHz mclk and 24bit samples. Signed-off-by: Jyri Sarha <jsarha@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | | | ASoC: cs4265: Fix register address to set the proper data type.Paul Handrigan2014-09-11
| |/ / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SPDIF control register must be written to set the data type in hw_params not the ADC control register. Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * | | | | Merge remote-tracking branch 'asoc/fix/core' into asoc-linusMark Brown2014-09-15
| |\ \ \ \ \ | | |/ / / / | |/| / / / | | |/ / /
| | * / / ASoC: Update email id of the authorRajeev Kumar2014-09-09
| |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | I moved from ST Microelectronics and so updating email-id to personal one. Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | | |
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| *---------. \ \ Merge remote-tracking branches 'asoc/fix/axi', 'asoc/fix/cs4265', ↵Mark Brown2014-09-02
| |\ \ \ \ \ \ \ \ | |_|_|_|/ / / / / |/| | | | | | / / | | | |_|_|_|/ / | | |/| | | | / | | |_|_|_|_|/ | |/| | | | | 'asoc/fix/da732x', 'asoc/fix/omap', 'asoc/fix/rsnd', 'asoc/fix/rt5640', 'asoc/fix/rt5677', 'asoc/fix/simple' and 'asoc/fix/tegra' into asoc-linus
| | | | | | * ASoC: rt5677: correct mismatch widget nameBard Liao2014-08-27
| |_|_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We name MICBIAS1 in dapm widget, but micbias1 in route table. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | | | | * ASoC: rt5640: Do not allow regmap to use bulk read-write operationsJarkko Nikula2014-08-27
| |_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debugging showed Realtek RT5642 doesn't support autoincrementing writes so driver should set the use_single_rw flag for regmap. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
| | | | * ASoC: da732x: Fix typo in include guardRasmus Villemoes2014-08-22
| |_|_|/ |/| | | | | | | | | | | | | | | Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Mark Brown <broonie@linaro.org>
| | | * ASoC: cs4265: Fix setting of functional mode and clock dividerPaul Handrigan2014-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported-by: Zoltán Szenczi <zoltan@raspberrypi.org> Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-23 19:16:32 -0400