aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
Commit message (Collapse)AuthorAge
* ASoC: cs4271: Fix wrong mask parameter in some snd_soc_update_bits callsAxel Lin2011-11-20
| | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alexander Sverdlin <subaparts@yandex.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm8753: Skip noop reconfiguration of DAI modeTimo Juhani Lindfors2011-11-17
| | | | | | | | | | | | | | | | This patch makes it possible to set DAI mode to its currently applied value even if codec is active. This is necessary to allow aplay -t raw -r 44100 -f S16_LE -c 2 < /dev/urandom & alsactl store -f backup.state alsactl restore -f backup.state to work without returning errors. This patch is based on a patch sent by Klaus Kurzmann <mok@fluxnetz.de>. Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
* ASoC: sta32x: preserve coefficient RAMJohannes Stezenbach2011-11-14
| | | | | | | | | | The coefficient RAM must be saved in a shadow so it can be restored when the codec is powered on using regulator_bulk_enable(). Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
* ASoC: wm9081: Don't write WM9081_BIAS_ENA bit to WM9081_VMID_CONTROL registerAxel Lin2011-11-08
| | | | | | | | WM9081_BIAS_ENA is the bit[1] of WM9081_BIAS_CONTROL_1 register (05h). Current code incorrectly write it to WM9081_VMID_CONTROL(04h) register. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: wm9081: Fix reading wrong register for setting VMID 2*240kAxel Lin2011-11-08
| | | | | | | | | | VMID Divider Enable and Select is controlled by BIT[2:1] of WM9081_VMID_CONTROL register (04h). Current code reads wrong register (WM9081_BIAS_CONTROL_1) for setting VMID 2*240k. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge branch 'for-3.2' of ↵Mark Brown2011-11-08
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-3.2
| * ASoC: Ensure we get an impedence reported for WM8958 jack detectMark Brown2011-11-04
| | | | | | | | | | | | | | | | | | Occasionally we may see an accessory reported before we have a stable impedance for the accessory. If this happens then reread the status in order to ensure that the handler can take the appropriate action for the status change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Don't use wm8994->control_data when requesting IRQsMark Brown2011-11-04
| | | | | | | | | | | | | | | | The field is no longer initialised so this will crash if running on wm8958. Reported-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Don't use wm8994->control_data in wm8994_readable_register()Mark Brown2011-11-04
| | | | | | | | | | | | | | | | | | The field is no longer initialised so this will crash if running on wm8958. Reported-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* | Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds2011-11-06
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
| * | sound: Add module.h to the previously silent sound usersPaul Gortmaker2011-10-31
| | | | | | | | | | | | | | | | | | | | | | | | Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | | Merge branch 'fix/asoc' into for-linusTakashi Iwai2011-11-03
|\ \ \ | |/ / |/| / | |/
| * ASoC: Ensure we always delay for WM8962 FLL when starting from SYSCLKMark Brown2011-11-01
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: Ensure the WM8962 oscillator and PLLs start up disabledMark Brown2011-11-01
| | | | | | | | | | | | | | | | Since there is no current software control for these they would otherwise be left enabled, consuming power. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: Ensure WM8962 PLL registers are resetMark Brown2011-11-01
| | | | | | | | | | | | | | | | The WM8962 has a separate software reset for the PLL registers. Ensure that these are reset also on startup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: Fix return value of wm5100_gpio_direction_out()Mark Brown2011-10-31
| | | | | | | | | | | | | | We can't just pass back the return value of snd_soc_update_bits() as it will be 1 if a bit changed rather than zero. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: WM8904: Set `invert' bit for Capture SwitchHong Xu2011-10-31
| | | | | | | | | | | | | | | | | | Set `invert' bit for Capture Switch. Otherwise analogue is muted when Capture Switch is ON. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: Leave input audio data bit length settings untouched in wm8711_set_dai_fmtAxel Lin2011-10-31
| | | | | | | | | | | | | | | | | | | | | | Current implementation in wm8711_set_dai_fmt always clear BIT[3:2] (the Input Audio Data Bit Length Select) of WM8711_IFACE(07h) register. Input Audio Data Bit Length Select bits are set by wm8711_hw_params, we should leave BIT[3:2] untouched in wm8711_set_dai_fmt. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: wm8711: Fix wrong mask for setting input audio data bit length selectAxel Lin2011-10-31
| | | | | | | | | | | | | | | | | | | | The Input Audio Data Bit Length Select is controlled by BIT[3:2] of WM8711_IFACE(07h) register. Current code incorrectly masks BIT[1:0] which is for Audio Data Format Select. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: tlv320aic3x: Clear BIT_CLK_MASTER and WORD_CLK_MASTER bits for for ↵Axel Lin2011-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | slave mode According to the datasheet: Page0 / Register8: Audio Serial Data interface Control Register A BIT 7: Bit Clock Directional Control 0: Bit clock is an input (slave mode) 1: Bit clock is an output (master mode) BIT 6: Word Clock Directional Control 0: Word clock is an input (slave mode) 1: Word clock is an output (master mode) Current code sets BIT_CLK_MASTER and WORD_CLK_MASTER bits for master mode, but does not clear these bits for slave mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: tlv320aic23: Clear TLV320AIC23_MS_MASTER bit for slave modeAxel Lin2011-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the datasheet: Digital Audio Interface Format (07h) register: BIT6: Master/slave mode 0: Slave 1: Master Current code sets TLV320AIC23_MS_MASTER bit for master mode, but does not clear it for slave mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8940: Fix mask for setting BCLKDIVAxel Lin2011-10-27
| | | | | | | | | | | | | | | | | | According to the datasheet: BCLK is controlled by BIT[4:2] of WM8940_CLOCK(06h) register. Signed-off-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge branch 'topic/asoc' into for-linusTakashi Iwai2011-10-27
|\|
| * ASoC: wm8940: Properly set codec->dapm.bias_levelAxel Lin2011-10-27
| | | | | | | | | | | | | | Reported-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
| * ASoC: max98095: Convert codec->hw_write to snd_soc_writeAxel Lin2011-10-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | codec->hw_write is broken now, convert codec->hw_write to snd_soc_write. The hardware has 2 banks of registers sharing a section in I2C register space. The 1st bank is the primary one and is cached. The 2nd bank is for loading coefficients only and they do not need cache. These coefficients registers are therefore direct writes. Thus we set cache_bypass flag to deal with this before calling snd_soc_write. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits callsAxel Lin2011-10-22
| | | | | | | | | | | | | | | | | | Ensure all mask bits are clear before setting new value. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Dong Aisheng <b29396@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2Axel Lin2011-10-22
| | | | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: da7210: Add support for line out and DACAshish Chavan2011-10-22
| | | | | | | | | | | | | | | | | | | | | | DA7210 has three line outputs. OUT1 Left, OUT1 Right and OUT2 (mono). This patch adds support for gain controls for these three line outs. It also adds support for overall DAC gain control. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: da7210: Add support for DAPMAshish Chavan2011-10-22
| | | | | | | | | | | | | | | | | | | | This patch adds support for DAPM covering all inputs and outputs as well as ADC and DAC. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask valueAxel Lin2011-10-21
| | | | | | | | | | | | | | | | | | | | We have defined SGTL5000_LINREG_VDDD_MASK in sgtl5000.h, use it instead of hardcoded (0x1 << 4) - 1 for the mask. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Set sgtl5000->ldo in ldo_regulator_registerAxel Lin2011-10-21
| | | | | | | | | | | | | | | | | | | | Otherwise calling ldo_regulator_remove() does not unregister regulator and free memories. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 CaptureAxel Lin2011-10-20
| | | | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 CaptureAxel Lin2011-10-20
| | | | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * ASoC: rt5631: Remove unused codec field from struct rt5631_privAxel Lin2011-10-20
| | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: ak4671: Use snd_soc_update_bits for read-modify-writeAxel Lin2011-10-20
| | | | | | | | | | | | | | | | | | Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Fix reg_word_size for ak4104Axel Lin2011-10-20
| | | | | | | | | | | | | | | | According to the register map in datasheet, the registers are 8 bit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm9081: Fix setting soft VMID ramp enable with VMID 2*240kAxel Lin2011-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the datasheet: BIT 2:1 VMID_SEL[1:0] VMID Divider Enable and Select 00 = VMID disabled 01 = 2x40k Omh divider 10 = 2x240k Omh divider 11 = 2x5k Omh divider To set VMID 2*240k, we should OR reg with 0x04 instead of 0x40. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: ak4641: Use SND_SOC_DAPM_DAC for Voice Playback stream widgetAxel Lin2011-10-19
| | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: da7210: Add support for ALC and Noise suppressionAshish Chavan2011-10-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds controls to set following ALC parameters, - Max gain, Min gain, Noise gain, Attack rate, Release rate and delay It also adds a switch to enable/disable noise suppression. As per DA7210 data sheet, ALC and noise suppression can be enabled only if certain conditions are met. This condition checks are handled by simply using "_EXT" version of controls to capture change events. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwod <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: da7210: Add support for mute and zero cross controlsAshish Chavan2011-10-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for below set of controls, (1) Mute controls for MIC, AUX and ADC (2) Zero cross controls for head phone, AUX, INPGA and line out (3) Head phone mode selection - class H or G It also adds digital_mute() call back. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: ak4641: Remove unused codec field from struct ak4641_privAxel Lin2011-10-19
| | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: ssm2602: Use snd_soc_update_bits for read-modify-writeAxel Lin2011-10-19
| | | | | | | | | | | | | | | | | | | | Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: WM9081 interrupt status register is volatileMark Brown2011-10-19
| | | | | | | | | | | | | | Not that we have interrupt handling in the driver at the minute. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
| * ASoC: sgtl5000: Fix setting mic bias resistorAxel Lin2011-10-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the datasheet: CHIP_MIC_CTRL 0x002A BITS[9:8] BIAS_RESISTOR 0x0 = Powerd off 0x1 = 2.0 kohm 0x2 = 4.0 kohm 0x3 = 8.0 kohm To set mic bias resistor, we need to update bits[9:8] of SGTL5000_CHIP_MIC_CTRL register. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: sgtl5000: Fix define for SGTL5000_BIAS_R_MASKAxel Lin2011-10-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the datasheet: CHIP_MIC_CTRL 0x002A BITS[9:8] BIAS_RESISTOR 0x0 = Powerd off 0x1 = 2.0 kohm 0x2 = 4.0 kohm 0x3 = 8.0 kohm Thus SGTL5000_BIAS_R_MASK should be defined as 0x0300 instead of 0x0200. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: ad193x: Use snd_soc_update_bits for read-modify-writeAxel Lin2011-10-19
| | | | | | | | | | | | | | | | | | | | | | Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Convert WM9081 to table based control initMark Brown2011-10-18
| | | | | | | | | | | | | | | | At least for the core controls, the optionally selected controls are still added programatically. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
| * ASoC: Update WM1811 DCS codes for latest evaluation resultsMark Brown2011-10-18
| | | | | | | | | | | | | | | | Evaluation of larger quantities of material has provided new DCS codes values to be applied for WM1811. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
| * ASoC: wm8580: Use snd_soc_update_bits for read-modify-writeAxel Lin2011-10-17
| | | | | | | | | | | | | | | | Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: wm8900: Use snd_soc_update_bits for read-modify-writeAxel Lin2011-10-17
| | | | | | | | | | | | | | | | Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-25 09:27:10 -0500