aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
Commit message (Collapse)AuthorAge
...
| * ASoC: tlv320aic3x: Sanitize output controlsJarkko Nikula2010-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently output controls are not uniform. Some routes are adjusted by mono controls that don't match to associated mixer switch, many routes are not covered at all and stereo controls have following variants: - L-to-L & R-to-R - R-to-L & R-to-R - L-to-L & R-to-L This patch attempts to fix these issues. First, for the convenience, only direct L-to-L, R-to-R and [L | R]-to-Mono routes are controlled by the stereo controls. This logic is also used with the output pin mute controls so all of them except mono output are controlled by stereo switches. Then rest of the swapped L-to-R and R-to-L routes are controlled by the mono controls that map to mixer switches with a same name. Mixers can then associate these switches and volumes together. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tlv320aic3x: Reimplement output mixersJarkko Nikula2010-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turned out that the output mixers and their routes were misdefined: They are not mixing output pins to internal signals but opposite. This has worked for direct left-to-left and right-to-right routes since for those there are complete routes. For swapped left-to-right and right-to-left routes this is not working since there are no routes defined between them. Another consequence is that those misdefined mixers are incorrectly routed to several output pins leading unnecessary pin powerings even if there is no route active to them. Fix these by reimplementing the output mixers and routes as they are in hardware. For completeness add also a few missing links between internal signals and outputs. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tlv320aic3x: Sort output pin control registers in header fileJarkko Nikula2010-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Each output pin has 7 consecutive control registers in tlv320aic3x register map. First 6 of them control the signal mixing and one is for output level and power control. Sort these registers as they are sorted clearly in hardware, it makes also definitions more readable and easier to pinpoint missing register definitions. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: tlv320aic3x: Fix remaining output pin switch namesJarkko Nikula2010-08-28
| | | | | | | | | | | | | | | | | | | | Bit 3 in output pin_CTRL register mutes the whole output pin not just the route from DAC so remove misleading DAC from control name. Currently only "Line[L | R] Playback Switch" were correct. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * Merge remote branch 'broonie-asoc/for-2.6.37' into for-2.6.37Liam Girdwood2010-08-23
| |\
| * | ASoC: Fix tlv320aic3x GPIO initializationJarkko Nikula2010-08-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | aic3x_init does a soft reset first and thus TLV320AIC3x GPIO setup must be done after doing the basic init. Before multi-component the init was done at i2c probe time and GPIO setup at soc probe time. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | ASoC: wm8753, remove dead codeJiri Slaby2010-09-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | There is adangling code in wm8753_probe which is never executed. Remove it. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: ak4642: Revive ak4642_snd_controlsKuninori Morimoto2010-09-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch revive ak4642_snd_controls which was removed on f0fba2ad1b6b53d5360125c41953b7afcd6deff0 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Added a missing 32-bit PCM format, to the wm8994 codec.Ian Lartey2010-09-01
| | | | | | | | | | | | | | | | | | Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Implement WM8994 DAC data source muxesMark Brown2010-09-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow selection of the channel used for input to the AIFnDAC signals. This isn't integrated into DAPM since we treat the data as a single mono channel until just beyond this selection so it ends up having no visible effect on the routing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | ASoC: OpenRD Client : Fix naming breakage due to multicomponent supportArnaud Patard (Rtp)2010-08-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | multicomponent support added/changed some device name but added some typos, breaking existing OpenRD Client support. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: uda1380: make driver more powersave-friendlyVasily Khoruzhick2010-08-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable some codec modules in standby mode, completely disable codec in off mode to save some power. Fix suspend/resume: mark mixer regs as dirty on resume to restore mixer values, otherwise driver produces no sound (master is muted by default). Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: ad1980: remove unneeded function declarationUwe Kleine-König2010-08-28
| | | | | | | | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Complete supported clock ratios and rate constraints for wm8741Ian Lartey2010-08-28
| | | | | | | | | | | | | | | | | | Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Make codec dai naming for WM8741 consistentIan Lartey2010-08-23
| | | | | | | | | | | | | | | | | | Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Add build infrastructure for WL1273Mark Brown2010-08-23
| | | | | | | | | | | | | | | | | | | | | | | | The Makefile and Kconfig updates for WL1273 appear to have been mising from the patch posted, add them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | ASoC: Log WM8994 separate ADC LRCLKs every time we configureMark Brown2010-08-23
| |/ |/| | | | | | | | | | | | | This makes it that little bit easier to spot the diagnostics in the logs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | Merge branch 'for-2.6.37' of ↵Mark Brown2010-08-20
|\| | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into for-2.6.37
| * ASoC: TI WL1273 FM Radio Codec.Matti J. Aaltonen2010-08-20
| | | | | | | | | | | | | | | | This is an ALSA codec for the Texas Instruments WL1273 FM Radio. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Add support for tlv320aic3007 to tlv320aic3x codec.Randolph Chung2010-08-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the tlv320aic3007 codec to the tlv320aic3x driver. The tlv320aic3007 is similar to the aic31, but has an additional class-D speaker amp. The speaker amp control register overlaps with the mono output register of other codecs in this family, so we add logic to identify the actual codec being registered to set things up accordingly. Signed-off-by: Randolph Chung <tausq@parisc-linux.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Use a more adequate name for the CX20442 codec DAIJanusz Krzysztofik2010-08-19
| | | | | | | | | | | | | | | | | | | | | | | | In the process of unification of codec DAI names while implementing multi-component, the CX20442 codec DAI has been renamed to "cx20442-hifi". This new name seems not adequate for a 8kHz voice codec. Use a better name, "cx20442-voice", as suggested by Liam Girdwood. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Configure symmetric rates for tlv320aic3xRandolph Chung2010-08-19
| | | | | | | | | | | | | | | | | | The tlv320aic3x codec driver only supports symmetric rates for capture/ playback. Set the flag in the DAI accordingly. Signed-off-by: Randolph Chung <tausq@parisc-linux.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: add 88pm860x codec driverHaojian Zhuang2010-08-18
| | | | | | | | | | | | | | | | | | Add 88PM860x codec driver. 88PM860x codec supports two interfaces. And it also supports headset/mic/hook/short detection. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: Support non-crystal master clocks for WM8731Mark Brown2010-08-18
|/ | | | | | | | | | | | | | Instead of unconditionally enabling the crystal oscillator on the WM8731 only enable it when explicitly selected via set_sysclk(), allowing machine drivers to specify that they drive a clock into MCLK alone. This avoids any conflicts between the oscillator and the external MCLK source and saves power for systems which do not need the oscillator. This should also deliver a small power saving on systems using the crystal since the oscillator will only be enabled when the ADC or DAC is active. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Remove unused WM8974 private dataMark Brown2010-08-17
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Fix argument ordering for snd_soc_update_bits() in WM8580Mark Brown2010-08-16
| | | | | | Reported-by: Seungwhan Youn <claude.youn@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* ASoC: Fix WM8580 CLKSEL mask selectionMark Brown2010-08-16
| | | | | | | | The RX and TX directions were inverted. Reported-by: Seungwhan Youn <claude.youn@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* Merge branch 'for-2.6.36' into for-2.6.37Mark Brown2010-08-16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fairly simple conflicts, the most serious ones are the i.MX ones which I suspect now need another rename. Conflicts: arch/arm/mach-mx2/clock_imx27.c arch/arm/mach-mx2/devices.c arch/arm/mach-omap2/board-rx51-peripherals.c arch/arm/mach-omap2/board-zoom2.c sound/soc/fsl/mpc5200_dma.c sound/soc/fsl/mpc5200_dma.h sound/soc/fsl/mpc8610_hpcd.c sound/soc/pxa/spitz.c
| * ASoC: Remove DSP mode support for WM8776Mark Brown2010-08-16
| | | | | | | | | | | | | | | | This is not supported by current hardware revisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
* | Merge branch 'for-2.6.36' of ↵Mark Brown2010-08-15
|\| | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.37 Trivial overlap with the removal of the local revision variable. Conflicts: sound/soc/codecs/wm8994.c
| * ASoC: Only tweak WM8994 chip configuration on devices up to rev DMark Brown2010-08-13
| | | | | | | | | | | | | | | | Any subsequent revisions will have these configuration changes applied by default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: Optimise DSP performance for WM8994Mark Brown2010-08-13
| | | | | | | | | | | | | | | | Change the chip defaults to optimise performance of some of the DSP functionality. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * ASoC: add AD1980 obsolete informationSonic Zhang2010-08-10
| | | | | | | | | | | | | | | | | | | | | | This codec has been obsoleted by ADI, so add appropriate warnings to the source tree to dissuade people from using in new designs based on driver support. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * ASoC: Fix inverted mute controls for WM8580Mark Brown2010-08-10
| | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
* | ASoC: Automatically manage WM8580 DAC OSRMark Brown2010-08-15
| | | | | | | | | | | | | | The DAC OSR should be selected based on the sample clock ratio. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Fix inverted WM8580 capture mute controlMark Brown2010-08-15
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Implement BCLK rate selection for WM8580Mark Brown2010-08-15
| | | | | | | | | | | | | | | | Drive a minimal supported number of clocks required for the current bit format in master mode. In slave mode this setting has no effect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Automatically calculate clock ratio for WM8580Mark Brown2010-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement set_sysclk() and then rather than assuming 256fs use the supplied value to calculate and configure the clock ratio for the currently used sample rate. As a side effect we also end up implementing clock selection for the ADC path. In order to avoid confusion remove the existing set_clkdiv() based configuration of the clock source for the DAC and update the SMDK64xx driver (which is the only in-tree user of the CODEC). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Remove unused rate selection bitmasks from WM8580Mark Brown2010-08-15
| | | | | | | | | | | | | | In the case of the BCLK rate the defines are at best misleading anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Convert WM8580 hw_params to use snd_soc_update_bits()Mark Brown2010-08-15
| | | | | | | | | | | | | | All the cool kids are using snd_soc_update_bits() these days. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Remove unused driver data from WM8961 probeMark Brown2010-08-12
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Staticise WM8727 codec driver structureMark Brown2010-08-12
| | | | | | | | | | | | | | Nothing should be referencing this any more. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Update WM8962 to build with multi-componentMark Brown2010-08-12
| | | | | | | | | | | | No notable changes, currently build tested only. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | Merge branch 'topic/multi-component' of ↵Mark Brown2010-08-12
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into for-2.6.37
| * | ASoC: multi-component: TWL4030: Restore registers on removalPeter Ujfalusi2010-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add back the register restore call, when the codec driver is removed. This does not affect normal operation, but it is usefull when debugging audio through the twl4030 class codecs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | ASoC: Remove version display from WM8971 driverMark Brown2010-08-12
| | | | | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | ASoC: Remove unneeded control_data management from Wolfson driversMark Brown2010-08-12
| | | | | | | | | | | | | | | | | | | | | | | | Now soc-cache.c can figure out the I2C and SPI control data from the device for the CODEC we don't need to manually assign it in drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | ASoC: Remove version display from WM8510 driverMark Brown2010-08-12
| | | | | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
| * | ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood2010-08-12
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | ASoC: Correct WM8580 Capture control namesMark Brown2010-08-10
| | | | | | | | | | | | | | | | Should use Capture rather than ADC so the UI tools can identify their function more readily. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-03 15:59:53 -0400