aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs
Commit message (Collapse)AuthorAge
...
* | | | | | ASoC: Add initial WM8955 CODEC driverMark Brown2009-12-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WM8955 is a low power, high quality stereo DAC with integrated headphone and loudspeaker amplifiers, designed to reduce external component requirements in portable digital audio applications. This is an initial driver implementing support for the majority of the functionality in the device, currently OUT3 is not supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | | | | ASoC: Fix build of DA7210Mark Brown2009-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DAC_VOICE_EN was not defined - looks to have been overly enthusiastically deleted from a previous revision of the patch, pull the value from v1. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | | | ASoC: PLL computation in TLV320AIC3x SoC driverPeter Meerwald2009-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix precision of PLL computation for TLV320AIC3x SoC driver, test results are at http://pmeerw.net/clk Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Vladimir Barinov <vova.barinov@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | | | ASoC: Fix sorting of codecs Makefile entriesMark Brown2009-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | | | | ASoC: Add DA7210 codec device support for ALSAKuninori Morimoto2009-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This original driver was created by Dialog Semiconductor, and cleanuped by Kuninori Morimoto. Special thanks to David Chen. This became very simple ASoC codec driver, and it is tested by EcoVec24 board. Signed-off-by: David Chen <Dajun.chen@diasemi.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | | | ASoC: tpa6130a2: Add support for regulator frameworkIlkka Koskinen2009-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Take the regulator framework in use for managing the power sources Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | | | ASoC: Register the CODEC in WM8727Mark Brown2009-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | | | | ASoC: Add regulator support to CS4270 codec driverDaniel Mack2009-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Timur Tabi <timur@freescale.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | | | ASoC: Initial WM8904 CODEC driverMark Brown2009-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WM8904 is a high performance ultra-low power stereo CODEC optimised for portable audio applications, with features including a class W amplifier, FLL with free running mode, Mobile ReTune and ground referenced headphone and line outputs. Support for some features, most particularly the digital microphone interface, is not yet present. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | | | | ASoC: tlv320dac33: Add support for regulator frameworkIlkka Koskinen2009-12-04
|/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | | ASoC: Rename controls with a / in wm_hubsJoonyoung Shim2009-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This renames from a character / to : of controls. A / occurs below error messages. ASoC: Failed to create IN2RP/VXRP debugfs file ASoC: Failed to create IN2LP/VXRN debugfs file Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | | Merge branch 'for-2.6.32' into for-2.6.33Mark Brown2009-11-27
|\| | | |
| * | | | ASoC: AIC23: Fixing infinite loop in resume pathAnuj Aggarwal2009-11-27
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes two issues: a) Infinite loop in resume function b) Writes to non-existing registers in resume function Cc: stable@kernel.org Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | ASoC: Revert missing reset_err in wm97*.cTakashi Iwai2009-11-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit fe3e78e073d25308756f38019956061153267769 ASoC: Factor out snd_soc_init_card() removed the error paths that are still valid for wm97* codecs, causing the compile errors like sound/soc/codecs/wm9705.c:399: error: label 'reset_err' used but not defined sound/soc/codecs/wm9712.c:687: error: label 'reset_err' used but not defined sound/soc/codecs/wm9713.c:1237: error: label 'reset_err' used but not defined Revert the removed error path codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ASoC: tlv320dac33: Change RT wq to singlethread wqPeter Ujfalusi2009-11-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RT workqueue is going away in the near future, replace it with singlethread wq for now, which is still supported. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | Merge branch 'ads117x' of ↵Mark Brown2009-11-20
|\ \ \ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.33
| * | | | ASoC: Update ads117x to current APIsMark Brown2009-11-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Probe as a platform driver (ads117x) and remove the call to snd_soc_init_card(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | | | ASoC: ADS117x ADC driverGraeme Gregory2009-11-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the TI ADS117x family of multichannel ADCs and was sponsored by Shotspotter Inc. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | | Merge branch 'for-2.6.32' into for-2.6.33Mark Brown2009-11-18
|\ \ \ \ \ | | |/ / / | |/| | |
| * | | | ASoC: tlv320aic23 fix rate selectionTroy Kisky2009-11-18
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the ordering of sr_valid_mask array. The lower bit of the index represents USB not bosr. Reported-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | ASoC: Remove redundant snd_soc_dapm_new_widgets() callsMark Brown2009-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The DAPM widgets are now insntantiated by the core when creating the card so there is no need for the individual CODEC drivers to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | ASoC: TWL4030: Do not modify the APLL_CTL registerPeter Ujfalusi2009-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | APLL_CTL register is configured by the twl4030-codec MFD driver. Remove code, which makes changes in the APLL_CTL register, and replace those with checks against the configured audio_mclk configuration done in the MFD driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | | ASoC: Remove dead code and labelsTakashi Iwai2009-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the dead code and labels "card_err" in the error paths of some codec drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | | | ASoC: Factor out snd_soc_init_card()Mark Brown2009-11-03
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | snd_soc_init_card() is always called as the last part of the CODEC probe function so we can factor it out into the core card setup rather than have each CODEC replicate the code to do the initialiastation. This will be required to support multiple CODECs per card. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Staticise wm8727 driver structureMark Brown2009-11-03
| | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Make sure, that the codec is powered on startupPeter Ujfalusi2009-11-02
| | | | | | | | | | | | | | | | | | | | | | | | Set the codec->bias_level to SND_SOC_BIAS_OFF before changing the initial bias level to STANDBY. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Add support for the WM8727 DAC.Neil Jones2009-11-02
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the Wolfson Microelectronics WM8727 DAC, this is a simple non-configurable DAC. Signed-off-by: Neil Jones <neil.jones@imgtec.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Add APLL supply for the capture pathPeter Ujfalusi2009-10-29
| | | | | | | | | | | | | | | | | | | | | | | | Capture path also need the APLL enabled, adding DAPM_SUPPLY for the Virtual ADCs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Change APLL powering sequencePeter Ujfalusi2009-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seams that certain part of the twl4030 codec needs the APLL enabled before they are enabled. Paths which has any digital processing needs need the APLL enabled before they can function. For example the vibra output will have some random data after it is enabled and before the APLL also enabled. If only analog components are in use (analog bypass), than it seams, that the APLL does not need to be enabled. This lowers the power consumption with around ~0.005A. Adding DAPM_SUPPLY to the Digital playback route and also to the capture route to enable and disable the APLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Vibra motor stop fix when it is driven with audioJari Vanhala2009-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes vibrator playing incoherently, when driven with audio. There is something wrong in switch 3 at H-bridge and VIBRA_SET still affects PWM generator. Slowest value fixes things. Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: CS4270: export de-emphasis filter as ALSA controlDaniel Mack2009-10-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CS4270 codec features an de-emphasis filter for compensation of audio material filtered by an 50/15 uS algorithm. Not sure whether we should always enable it for 44100Hz sampling frequency, but it should at least be configurable by the user. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Change codec_muted to apll_enabledPeter Ujfalusi2009-10-28
| | | | | | | | | | | | | | | | | | | | | | | | codec_muted is missleading, change it to apll_enabled, which is what it is doing: enabing and disabling the APLL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Remove bypass trackingPeter Ujfalusi2009-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since ASoC core now handling the codec bias differently there is no need to do the tracking of bypass switch states anymore. Handling of the common bit for analog loopbacks is done with DAPM_SUPPLY for the bypass paths. Now this bit is only enabled when there is a complete analog bypass path, compared to the previous implementation, when the global switch was enabled if there were any of the analog bypass switch was on (regardless if there were complete path or not) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Add regulator support for WM8731Mark Brown2009-10-26
| | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Driver registration via twl4030_codec MFDPeter Ujfalusi2009-10-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | Change the way how the twl4030 soc codec driver is loaded/probed. Use the device probing via tlw4030_codec MFD device. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: use the twl4030-codec.h for register descriptionsPeter Ujfalusi2009-10-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the register descriptions from the twl4030.h file and use the linux/mfd/twl4030-codec.h instead, which has the codec related register descriptions also. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: tlv320dac33: typo fix in the headerPeter Ujfalusi2009-10-21
| | | | | | | | | | | | | | | | | | | | | | | | Fix the definition of DAC33_LTM field, the LTM bits in FIFO_IRQ_MODE_B register are starting at bit 6. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TWL4030: Only update the needed bits in *set_dai_sysclkPeter Ujfalusi2009-10-19
| | | | | | | | | | | | | | | | | | | | | | | | Do not rewrite the whole register, but only update the needed bits in set_dai_sysclk functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Codec driver for Texas Instruments tlv320dac33 codecPeter Ujfalusi2009-10-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo audio DAC. TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low power audio playback. The digital interface can use I2S, DSP (A or B), Right and Left justified formats. DAC33 has stereo analog input, which can be bypassed to the analog outputs. Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass' mode (default) and nSample mode (FIFO is in use). a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is working synchronously as a normal codec (it needs constant stream of data on the digital interface). b) The nSample mode implementation uses one interrupt line from DAC33 to the host: Alarm threshold is set to 10ms of audio data (limit by the driver implementation). DAC33 will signal an interrupt, when the FIFO level goes under the Alarm threshold. The host will write to nSample register a value (number of stereo samples), to tell DAC33 how many samples it should read in a burst from the host. When the DAC33 received the number of samples, it disables the clocks on the I2S bus. When the FIFO use again goes under the Alarm threshold, DAC33 signals the host with an interrupt, and the process is repeated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Remove snd_soc_suspend_device()Mark Brown2009-10-15
| | | | | | | | | | | | | | | | | | | | | | | | The PM core will grow pm_link infrastructure in 2.6.33 which can be used to implement the intended functionality of the ASoC-specific device suspend and resume callbacks so drop them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TPA6130A2: Make tpa6130a2_power as staticPeter Ujfalusi2009-10-12
| | | | | | | | | | | | | | | | | | | | | | | | The power for the amplifier should be handled internally by the tpa6130a2 driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: Minor fixups to tpa6130a2 driverMark Brown2009-10-09
| | | | | | | | | | | | | | | | | | | | | | | | - Staticise ttpa6130a2_client. - Remove unneeded cast from void. - Use explict NULL rather than 0. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | ASoC: TPA6130A2 amplifier driverPeter Ujfalusi2009-10-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver for Texas Instruments TPA6130A2 stereo headphone amplifier. The driver provides playback gain control and also pre-defined DAPM_HP widgets and DAPM routings for power management. The DAPM_HP widget names are: "TPA6130A2 Headphone Left" "TPA6130A2 Headphone Right" From soc machine drivers to use with the tpa6130a2 amplifier, the tpa6130a2_add_controls has to be called, which adds the alsa controls and the DAPM routing needed for the tpa6130a2. After that the machine driver can connect the codec's output with 'TPA6130A2 Left' and 'TPA6130A2 Right': {"TPA6130A2 Left", NULL, "CODEC LEFT OUT"}, {"TPA6130A2 Right", NULL, "CODEC RIGHT OUT"}, Internally the left and right channels are powered separately. When none of the channels are needed the amplifier is powered down: hard power: valid GPIO number is passed within platform data soft power: Using the software shutdown of the amplifier Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | Merge branch 'for-2.6.32' into for-2.6.33Mark Brown2009-10-08
|\| |
| * | Merge branch 'upstream/wm8350' into for-2.6.32Mark Brown2009-10-06
| |\ \
| | * | ASoC: WM8350 capture PGA mutes are invertedMark Brown2009-10-06
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* | | | Merge branch 'for-2.6.32' into for-2.6.33Mark Brown2009-10-06
|\| | |
| * | | Merge branch 'for-2.6.32' of ↵Mark Brown2009-10-06
| |\ \ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.32
| * \ \ \ Merge branch 'fix/asoc' of ↵Linus Torvalds2009-09-23
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: wm8753: fix mapping when MONOMIX is set to Stereo ASoC: some minor changes for AD1836 and AD1938 codec drivers ASoC: DaVinci: Fixes to McASP configuration ASoC: Blackfin I2S: fix resuming when device hasn't been used ASoC: Blackfin I2S: add lost platform_device parameter to resume function ASoC: fix typos in Blackfin headers ASoC: bf5xx-sport: the irq save/restore funcs take an unsigned long ASoC: Blackfin AC97: add a few missing multichannel define handling
| * | | | | trivial: remove unnecessary semicolonsJoe Perches2009-09-21
| | |_|_|/ | |/| | | | | | | | | | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-21 07:47:07 -0400