aboutsummaryrefslogtreecommitdiffstats
path: root/sound/pci
Commit message (Collapse)AuthorAge
* [ALSA] remove CVS keywordsAdrian Bunk2008-05-27
| | | | | | | | This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] ice1724: fix MIDIClemens Ladisch2008-05-20
| | | | | | | | | The VT1724 MIDI port is not MPU-401 compatible; remove the hacks that try to make the MPU-401 library work with it, and just use some simple device-specific code. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Pavel Hofman <pavel.hofman@insite.cz>
* [ALSA] hda - Fix DMA position inaccuracyTakashi Iwai2008-05-19
| | | | | | | | | | | | | Many HD-audio controllers seem inaccurate about the IRQ timing of PCM period updates. This has caused problems on audio quality; e.g. JACK doesn't work with two periods. This patch fixes the problem by checking the current DMA position at IRQ handler and delays the period-update via a workq if it's inaccurate. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] PCI168 snd-azt3328 Linux driver: another huge updateAndreas Mohr2008-05-19
| | | | | | | | | | | | | | | | | | | | | | | - figured out 'Digital(ly) Enhanced Game Port' functionality, implemented support for it (eliminating gameport polling overhead) - removed optional joystick activation, gameport now enabled unconditionally, since we now support it via the PCI I/O space, not via conflict-prone legacy I/O (which I was thus able to DISABLE now)! - fix playback bug (a muted wave output would get unmuted upon start of playback, of course this is not what we want, thus remember mute state) - implement partial power management: when idle, lower clock rate and disable codec (reduced noise!), and disable gameport circuit when unused - instantiate OPL3 timer, too - much better implementation of snd_azf3328_mixer_write_volume_gradually() - slightly optimized interrupt handling - lots of cleanup This time, I also found a way to verify proper OPL3 operation via MIDI file playback (emulation via synth hardware). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] virtuoso: restrict period time to less than 10 sClemens Ladisch2008-05-19
| | | | | | | | | Add a constraint for the period time so that there are less than ten seconds between interrupts so that ALSA does not assume that the device is dead. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add symbols for buffer/period size constraintsClemens Ladisch2008-05-19
| | | | | | | | Introduce symbols for the buffer/period size constraints so that their limits and relationships become clearer. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add PM supportClemens Ladisch2008-05-19
| | | | | | | Add suspend/resume support. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] virtuoso: add xonar_enable_output()Clemens Ladisch2008-05-19
| | | | | | | Move the setting of the output enable GPIO bit to a separate function. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: separate out hardware initialization codeClemens Ladisch2008-05-19
| | | | | | | | | Create separate functions for the code that initializes the hardware, as opposed to initializing internal driver state, so that they can be reused for resume support. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: simplify DAC volume initializationClemens Ladisch2008-05-19
| | | | | | | | When initializing the DAC volume registers, we can just use the generic volume update functions instead of setting the registers manually. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: save register writesClemens Ladisch2008-05-19
| | | | | | | | | Save the written values of all CMI8788 and AC97 registers and of some of the DAC/ADC registers so that it is possible to restore the register state later. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: add symbol for I/O space sizeClemens Ladisch2008-05-19
| | | | | | | | Remove another magic number - add a symbol for the size of the PCI I/O range. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] oxygen: fix version in MODULE_LICENSEClemens Ladisch2008-05-19
| | | | | | | Adjust the MODULE_LICENSE strings to properly reflect the actual license. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] ac97 - Add virtual master control to VT1616/VT1617A codec.Daniel Jacobowitz2008-05-19
| | | | | | | | Enable VMASTER for VT1616 / VT1617A codec. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: aw2 - Fix Oops at initializationTakashi Iwai2008-06-23
| | | | | | | The irq handler may be called before the proper initialization of hardware. Call snd_aw2_saa7146_setup() before the irq handler registration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: fix NULL pointer dereference when loading snd-oxygenClemens Ladisch2008-06-16
| | | | | | | Check that model->control_filter is set before trying to call it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix "alc262_sony_unsol[]" hda_verb arrayAkio Idehara2008-06-09
| | | | | | | | | | I think that hda_verb array must have "terminator (empty array)". But alc262_sony_unsol[] does not have it. And it causes gcc-4.3's buggy behavior with snd_hda_sequence_write(). Signed-off-by: Akio Idehara <zbe64533@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: emu10k1 - fix system hang with Audigy2 ZS Notebook PCMCIA cardJaroslav Franek2008-06-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the Linux kernel is compiled with CONFIG_DEBUG_SHIRQ=y, the Soundblaster Audigy2 ZS Notebook PCMCIA card causes the system hang during boot (udev stage) or when the card is hot-plug. The CONFIG_DEBUG_SHIRQ flag is by default 'y' with all Fedora kernels since 2.6.23. The problem was reported as https://bugzilla.redhat.com/show_bug.cgi?id=326411 The issue was hunted down to the snd_emu10k1_create() routine: /* pseudo-code */ snd_emu10k1_create(...) { ... request_irq(... IRQF_SHARED ...) { register the irq handler #ifdef CONFIG_DEBUG_SHIRQ call the irq handler: snd_emu10k1_interrupt() { poll I/O port // <---- !! system hangs ... } #endif } ... snd_emu10k1_cardbus_init(...) { initialize I/O ports } ... } The early access to I/O port in the interrupt handler causes the freeze. Obviously it is necessary to init the I/O ports before accessing them. This patch moves the registration of the irq handler after the initialization of the I/O ports. Signed-off-by: Jaroslav Franek <jarin.franek@post.cz> Acked-by: James Courtier-Dutton <James@superbug.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - COMPAL IFL90/JFL-92 laptop quirkTony Vroon2008-06-04
| | | | | | | | | Use quirk table to assign ALC268_TOSHIBA to COMPAL IFL90/JFL-92 laptops. No analog output on autoprobe. Signed-off-by: Tony Vroon <tony@linx.net> Tested-by: Guri <gurashka@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix resume of auto-config mode with Realtek codecsTakashi Iwai2008-06-03
| | | | | | | | | | | | The auto-config mode of Realtek ALC codecs has a bug since 2.6.25 that it cannot resume properly. The problem was the wrong assignment of init_hook that overrides the whole initialization. Relevant bug reports: http://bugzilla.kernel.org/show_bug.cgi?id=10662 https://bugzilla.novell.com/show_bug.cgi?id=385473 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix model for LG LS75 laptopTakashi Iwai2008-05-30
| | | | | | | | Set the proper model for LG LS75 with CM9880 codec. See ALSA bug#2105: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2105 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix mic input on HP2133Takashi Iwai2008-05-30
| | | | | | | The mic pins are wrongly assigned on AD1884A mobile model. The mic handling is fixed for the automatic mic selection, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] ac97 - Fix ASUS A9T laptop outputTakashi Iwai2008-05-30
| | | | | | | ASUS A9T laptop uses line-out pin as the real front-output while other devices use it as the surround. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix capture mute Widget for stac9250/9251Mauro Carvalho Chehab2008-05-25
| | | | | | | Fix capture mute widget for STAC9250/9251 codecs. The widget 0x09 has no mute but 0x14 does actually. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* [ALSA] hda - Added support for Foxconn P35AX-S mainboardTravis Place2008-05-24
| | | | | | | | Added IDs for the Foxconn P35AX-S mainboard to patch_realtek.c, so that ALC883_6ST_DIG is used by default. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix COEF and EAPD in ALC889 auto-configuration modeTakashi Iwai2008-05-24
| | | | | | | Fix the missing COEF and EAPD initialization in ALC889 auto-configuration mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix noise on VT1708 codecTakashi Iwai2008-05-24
| | | | | | | | | We get quite noisy output on the right channel on VT1708 codec when 24bit samples are used. Suppress the 24bit support until any real fix is found. https://bugzilla.novell.com/show_bug.cgi?id=390473 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Add model for ASUS P5K-E/WIFI-APTravis Place2008-05-24
| | | | | | | | Added a config table entry for the ASUS P5K-E/WIFI-AP mainboard (ID 1043:8227) to use AD1988_6STACK_DIG Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix ASUS P5GD1 modelTravis Place2008-05-20
| | | | | | | | Corrected the model assignment for the ASUS P5GD1 w/SPDIF after reports of surround sound not being possible. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix ALC262 fujitsu modelTakashi Iwai2008-05-20
| | | | | | | Fixed the speaker auto-mute with two laptop and docking headphones. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Tony Vroon <tony@linx.net>
* [ALSA] ac97 - Add a workaround for broken quirk for VT1617A codecTakashi Iwai2008-05-05
| | | | | | | | | | | On boards with VT1617A codec, the sound disappears suddenly. This looks like a problem with HPE-bit control that is supposed to be set in patch_vt1617a(). However, on such problematic hardwares, the bit is actually reset mysteriously. The patch adds a workaround for the wrong quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Revert migration to alc_set_pin_output() in ↵Jacek Luczak2008-05-05
| | | | | | | | | | | | alc861_auto_set_output_and_unmute() Change done by: commit f6c7e5461e9046445d50c5c7a9a4587824239623 [ALSA] hda-codec - Fix auto-configuration of Realtek codecs broke sound on ALC861 Analog. Signed-off-by: Jacek Luczak <luczak.jacek@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] fm801 - Fix kconfig dependency mess of fm801-tea575xTakashi Iwai2008-05-05
| | | | | | | | | | | | FM801-tea575x tuner has a reverse selection to V4L1 and this causes nasty dependency problems. The patch simplifies the dependency with a normal "depends on VIDEO_V4L1". This decreases the usability but fixes bugs, yeah. If any better feature like "requires" is introduced to kbuild in future, we'll be able to switch it... Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Support IDT 92HD206 codecTakashi Iwai2008-05-05
| | | | | | | Added the support for IDT 92HD206 codec chip. It's compatible with STAC927x. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Add support of Medion RIM 2150Takashi Iwai2008-04-29
| | | | | | | | Added the support of Medion RIM 2150 laptop with ALC880 codec. ALSA bug#3708: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3708 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] ice1724 - Enable watermarksTakashi Iwai2008-04-29
| | | | | | | | Enable watermarks settings (previously commented out) for MPU RX/TX. Otherwise irqs aren't issued properly. Tested-by: Pavel Hofman <pavel.hofman@insite.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Add MPU401_INFO_NO_ACK bitflagTakashi Iwai2008-04-29
| | | | | | | | Added MPU401_INFO_NO_ACK bitflag to ignore the ACK check for UART commands. VT172x doesn't handle ACK commands, for example. Tested-by: Pavel Hofman <pavel.hofman@insite.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] ice1724 - Fix IRQ lock-up with MPU accessTakashi Iwai2008-04-24
| | | | | | | | The sound boards with VT1724 and compatible chips may lock up when MPU401 is accessed together with the PCM streaming. This patch fixes the problem. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix Thinkpad X300 digital micTakashi Iwai2008-04-24
| | | | | | TP X300 digital mic requires additional init verbs with magic COEFs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix model for Acer Aspire 5720zTakashi Iwai2008-04-24
| | | | | | | | Set the proper model=acer for Acer Aspire 5720z with ALC268 codec. ALSA bug#3550: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3550 Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Fix possible races at free_irq in PCI driversTakashi Iwai2008-04-24
| | | | | | | | The irq handler of PCI drivers must be released before releasing other resources since the handler for a shared irq can be still called and may access the freed resource again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] ice1712 - Add Terrasoniq TS88 supportPeter Lienig2008-04-24
| | | | | | | Added the support of Terrasonq TS88. Signed-off-by: Peter Lienig <lienig@rheinmetall-de.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Fix synchronize_irq() bugs, redundanciesJeff Garzik2008-04-24
| | | | | | | | | | | | | | | | free_irq() calls synchronize_irq() for you, so there is no need for drivers to manually do the same thing (again). Thus, calls where sync-irq immediately precedes free-irq can be simplified. However, during this audit several bugs were noticed, where free-irq is preceded by a "irq >= 0" check... but the sync-irq call is not covered by the same check. So, where sync-irq could not be eliminated completely, the missing check was added. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Audiophile 192: Fix ad converter initializationKarsten Wiese2008-04-24
| | | | | | | | Correct some arguments in calls to snd_ice1712_gpio_write_bits() from ap192_set_rate_val(). Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Don't set gpio mask register in snd_ice1712_gpio_write_bits()Karsten Wiese2008-04-24
| | | | | | | | | | Some calls to snd_ice1712_gpio_write() go wrong, if snd_ice1712_gpio_write_bits() ran before and changed the gpio mask register. Read the actual gpio value and combine it with the to be set bits in the cpu instead. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] ice1724.c: toggle "chip reset" and "eeprom based setup" sequenceKarsten Wiese2008-04-24
| | | | | | | | Let "chip reset" become first. Increasement of the "chip reset" related timeout leads to correctly read eeprom's contents here. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Avoid unexpected breakage with ALC889A hackTakashi Iwai2008-04-24
| | | | | | | | | The last ALC889A hack may break on some devices with certain model presets since patch_alc*() have different model tables. So, now it's handled in the original patch_alc882() but fly to patch_alc883() in model=auto appropriately. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda - Fix ALC889A codec supportTakashi Iwai2008-04-24
| | | | | | | | ALC889A is recognized ALC885/ALC882 but it's actually closer to ALC888/ALC883. Cc: Kasper Sandberg <lkml@metanurb.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda: Add 5.1 support for second headphone jackMatthew Ranostay2008-04-24
| | | | | | | | | | Several 92hd7xxx and STAC9228 laptops have multiple headphone jacks, the second headphone jack should be used for the 5.1 surround sound. Add support for 'Headphone as Line Out' switch, which allows it be used in 5.1 surround sound. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] oxygen: generalize DAC volume TLV handlingClemens Ladisch2008-04-24
| | | | | | | | Add a pointer for DAC volume TLV data to the model structure so that the model driver do not need to manually assign it in their control filter. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-11 03:51:45 -0500