aboutsummaryrefslogtreecommitdiffstats
path: root/sound/pci
Commit message (Collapse)AuthorAge
* [ALSA] intel8x0 - Fix handling of module parametersTakashi Iwai2005-11-04
| | | | | | | | | Modules: Intel8x0 driver - Set buggy_irq parameter before registration of irq handler. - Clean up module parameter handling. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Reduce interrupt latency in sound/pci/via82xx.cKarsten Wiese2005-11-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | Modules: VIA82xx driver The change only affects the via823x kind of chips. Here the via8233_pcm_pointer_hw() function (named snd_via8233_pcm_pointer() before) needed to loop until a non zero position is red from the chip. Measurements have shown that more than 200 loops are typically needed on an Athlon64. As io-reads cost many cycles, those loops sum up huge. via8233_pcm_pointer_hw() runs either in interrupt or with interrupts disabled. So it introduces significant interrupt latency. The patch introduces a calculated position value hwptr_done, that is updated by the interrupt routine when a period is completed. It is only used, if the 823x chip returns a zero position, which can't be interpreted reliably. Further optimisation is applied on the 8233 chip's interrupt routine: Only the SGD_SHADOW is read, as it contains all infos needed. We ommit ~5 more register reads that way. Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Enable DXS controls for VIA VT82xxHonza Maly2005-11-04
| | | | | | | | | | | Modules: VIA82xx driver The patch enable separate DXS controls of sound function of VIA VT82xx controller in case DXS volume is not needed for PCM Playback volume control emulation. Signed-off-by: Honza Maly <hkmaly@matfyz.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Add support of high-rate SPDIF outputTakashi Iwai2005-11-04
| | | | | | | | Modules: ICE1724 driver Add support of SPDIF output with sample rates higher than 48kHz. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda-codec - Get subsystem ID from AFG/MFGTakashi Iwai2005-11-04
| | | | | | | | Modules: HDA Codec driver Get subsytem ID from AFG/MFG if not obtained from the root node. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] es1938 - Clean up and fix trigger in PMTakashi Iwai2005-11-04
| | | | | | | | | Modules: ES1938 driver - Clean up the last PM fix - Add TRIGGER_SUSPEND/RESUME to disable/enable DMA properly during PM Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] es1938 - Fix resumeRudolf Marek2005-11-04
| | | | | | | | | | | | Modules: ES1938 driver This patch fixes the suspend/resume issue I'm having with ESS-Solo1 soundcard. Without this patch I might get after resume message that kernel is disabling the IRQ5 (soundcard). If there was something playing it wont continue after resume without this patch. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] via82xx - Add DXS entry for Clevo D470Takashi Iwai2005-11-04
| | | | | | | | Modules: VIA82xx driver Added the DXS entry for Clevo D470 laptop. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove vmalloc wrapper, kfree_nocheck()Takashi Iwai2005-11-04
| | | | | | | | - Remove vmalloc wrapper - Add release_and_free_resource() to remove kfree_nocheck() from each driver and simplify the code Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove snd_runtime_check() macroTakashi Iwai2005-11-04
| | | | | | | | | | | Remove snd_runtime_check() macro. This macro worsens the readability of codes. They should be either normal if() or removable asserts. Also, the assert displays stack-dump, instead of only the last caller pointer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Sasha Khapyorsky: My email address is changed, there is update.Sasha Khapyorsky2005-11-04
| | | | | | | Modules: Intel8x0-modem driver,VIA82xx-modem driver,HDA Codec driver Signed-off-by: Sasha Khapyorsky <sashakh@alsa-project.org> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] intel8x0 - enable ac97_quirk hp_only for Acer Aspire 3003LCiDick Streefland2005-11-04
| | | | | | | | | | | | Modules: Intel8x0 driver On my Acer Aspire 3003LCi laptop, the speaker volume is not controlled by the master control, but by the headphone control. Enabling the 'hp_only' quirk corrects this. The patch below adds this device to the list of known quirks. Signed-off-by: Dick Streefland <dick@streefland.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Allow 8-44khz sample rates on Revolution 7.1Takashi Iwai2005-11-04
| | | | | | | | | Modules: ICE1724 driver Remove the restcition of sample rates on Revolution 7.1 board. This enables the low 8-44kHz sample rates. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Add dummy obsoleted module options for backward compatibilityTakashi Iwai2005-11-04
| | | | | | | Added dummay obsoleted module options for backward compatibility (to reduce possible bugzilla entries :) Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] intel8x0 - Suppress the codec warnings during probingTakashi Iwai2005-11-04
| | | | | | | | Modules: Intel8x0 driver Suppress the codec warnings during probing of codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] highlanderize motherboard AC97/HDA driversClemens Ladisch2005-11-04
| | | | | | | | Remove the code for supporting eight cards from the integrated controller drivers because There Can Be Only One controller of each type per mainboard. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] sound: align device drivers menusRandy Dunlap2005-11-04
| | | | | | | | | | | Modules: Sound Core,PCI drivers AC97 Kconfig entries broke the ALSA device drivers menu, so move them to a location where that won't happen, enabling all device sub-menus to be presented together. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Removing obsolete AC97_SHARED_TYPESSasha Khapyorsky2005-11-04
| | | | | | | | | | This patch cleans last ac97 audio/modem codec interception in initialization procedures (ac97_mixer_new()) and removes obsolete SHARED_TYPE 'locking' which prevents from AMC codecs to function correctly. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] dev_class=SNDRV_PCM_CLASS_MODEM for modem PCMsSasha Khapyorsky2005-11-04
| | | | | | | dev_class=SNDRV_PCM_CLASS_MODEM for all supported softmodem PCMs Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] ymfpci: add S/PDIF-in > S/PDIF-out loopGlen Masgai2005-11-04
| | | | | | | | | | Modules: YMFPCI driver This patch adds a new mixer control called 'IEC958 Loop' which makes it possible to loop digital signals from S/PDIF-in to S/PDIF-out. Signed-off-by: Glen Masgai <mimosius@gmx.de> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] au88x0: codec access procs for multiple AC97 codecsSasha Khapyorsky2005-11-04
| | | | | | | | | | Modules: au88x0 driver This patch extends au88x0 AC97 codec access procedures to handle multiple codecs properly. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda-codec - A new model for Fujitsu S7020Jonathan Woithe2005-11-04
| | | | | | | | Modules: HDA Codec driver Added a new model 'fujitsu' to ALC260 config for Fujitsu S7020. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] cmipci: use FM/MIDI ports in PCI port spaceClemens Ladisch2005-11-04
| | | | | | | | | Modules: CMIPCI driver If possible, use ports in the card's PCI port address range instead of the legacy ports. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] hda-intel - Add NVidia supportVinod G2005-11-04
| | | | | | | | | | | Modules: HDA Intel driver This patch is to make the Intel HDA code work for NVIDIA azalia controller. Modified by Takashi Iwai <tiwai@suse.de> Signed-off-by: Vinod G. <vinodg@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Fix a typoTakashi Iwai2005-11-04
| | | | | | | | Modules: AC97 Codec Fix a typo in the last patch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Fix surround control of CMI9761Takashi Iwai2005-11-04
| | | | | | | | | Modules: AC97 Codec - Fixed surround controls of CMI9761 (model 83) in update_jacks callback. - Clean up ad1888 and ad1985 update_jacks callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] emu10k1: Front channels via fxbus 8 and 9Mikael Magnusson2005-11-04
| | | | | | | | | | Modules: EMU10K1/EMU10K2 driver Adds left and right front channel outputs using fxbus 8 and 9 and 'Front' playback and capture volume controls. Signed-off-by: Mikael Magnusson <mikma@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [PATCH] Creative Audigy 2 cardbus: Add IO window wakeup magicJames Courtier-Dutton2005-10-31
| | | | | | | | | | | | | | | | | | | | This adds the magic IO wakeup code for the CardBus version of the Creative Labs Audigy 2 to the snd-emu10k1 driver. Without the magic IO enable sequence, reading from the IO region of the card will fail spectacularly, and the machine will hang. My next task will be getting the driver to actually play sound without distortion. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk> [ This is a work-in-progress, but since it avoids a total lockup if the emu10k module is loaded on a machine with the cardbus card inserted, we're better off with it than without it, even if sound quality is bad right now ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] pci_ids: macros: replace partial with whole symbolsGrant Coady2005-10-28
| | | | | | | | | | | | | pci_ids cleanup: replace symbols built by macros with whole symbols to aid grep searches. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/video/cirrusfb.c | 24 ++++++++++++------------ sound/oss/ymfpci.c | 17 +++++++++-------- sound/pci/bt87x.c | 11 +++++++---- 3 files changed, 28 insertions(+), 24 deletions(-)
* [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King2005-10-28
| | | | | | | | | | | | | | | | In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ALSA] ali5451 - Don't build non-existing modem PCMTakashi Iwai2005-10-07
| | | | | | | ALI5451 driver Don't build the modem PCM if the corresponding codec isn't detected. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] emu10k1 - Fix handling of ac97_chip=2Takashi Iwai2005-10-07
| | | | | | | | | EMU10K1/EMU10K2 driver Fixed the handling of ac97_chip=2 capability type. The error occurs in snd_ac97_mixer(), not in snd_ac97_bus(). Also, release the unnecessary ac97_bus object in the error path. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] korg1212: fix typoClemens Ladisch2005-10-07
| | | | | | | KORG1212 driver Add a missing comma that made the stateName array one entry too short. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] emu10k1 - Fix loading of SBLive Game boardTakashi Iwai2005-10-07
| | | | | | | | | EMU10K1/EMU10K2 driver Fixed the error at loading SBLive Game board (and possible other models). The PCI SSIDs of this board conflicts with SB Live 5.1 Platinum, which has no AC97 chip. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] via82xx - dxs_support entry for an ASUS moboTakashi Iwai2005-10-07
| | | | | | | VIA82xx driver Addded a dxs_support entry for an ASUS mobo. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Fix confliction of capture controls on ALC880 test modelTakashi Iwai2005-10-07
| | | | | | | HDA Codec driver Fixed the confliction of capture controls on ALC880 'test' model. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] fix HD audio ALC882 lfe (un)muteJohn W. Linville2005-10-07
| | | | | | | | | HDA Codec driver Mark the ALC882 'LFE Playback Switch' as an input, like the other playback switch settings. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] fix alc880_test_mixer typoJohn W. Linville2005-10-07
| | | | | | | | HDA Codec driver Fix a typo (cut & paste) in the alc880_test_mixer structure. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] fix HD audio ALC260 mono (un)muteJohn W. Linville2005-10-07
| | | | | | | | | | HDA Codec driver The ALC260 'Mono Playback Switch' is marked as an output in patch_realtek.c. It actually does not work unless it is marked as an input. Go figure... This was tested and confirmed on an HP xw4300. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] via82xx - Add a dxs whitelist entryTakashi Iwai2005-10-07
| | | | | | | VIA82xx driver Added a dxs whitelist entry for an ECS mobo. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] clean suspend/resume calls for ac97_bus_typeNicolas Pitre2005-10-07
| | | | | | | | | | | AC97 Codec A single call to the driver suspend/resume method for each device is enough. The level and SUSPEND_*/RESUME_* arguments are deprecated and said to be removed eventually anyway (no other subsystem are using them anymore except platform devices). Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] remove redundent assignment to the ac97 device structureNicolas Pitre2005-10-07
| | | | | | | | | | | AC97 Codec Don't use dev.platform_data to store a reference to the containing ac97_t structure. Such assignment is redundent since we can deduce the ac97_t structure location from the contained device structure. This sets platform_data free for other purposes. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] remove bogus match method for ac97_busNicolas Pitre2005-10-07
| | | | | | | | | | AC97 Codec The bus_id is initialized with a generic identifier string which is not really useful for proper driver matching. Let the driver decide what it needs via its probe method instead. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda-intel - Disable DMA position auto-correctionTakashi Iwai2005-10-07
| | | | | | | | HDA Intel driver Disable the auto-correction of DMA position temporarily. It doesn't work as expected yet... Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] hda-codec - 'empty' generic mfg-only codecSasha Khapyorsky2005-10-07
| | | | | | | | HDA generic driver This creates 'empty' hda generic for unknown MFG-only codecs. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] no templated index for si3036 modem controlsSasha Khapyorsky2005-10-07
| | | | | | | | AC97 Codec No index is templated for si3036 modem controls. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] no templated index for mc97 controlsSasha Khapyorsky2005-10-07
| | | | | | | | AC97 Codec No index is templated for mdoem controls. Signed-off-by: Sasha Khapyorsky <sashak@smlink.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [PATCH] atiixp_modem printk fixesChuck Ebbert2005-09-23
| | | | | | | | | Correctly identify atiixp_modem in its error messages. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] add PCI IDs so RME32 and RME96 drivers buildRoland Dreier2005-09-14
| | | | | | | | | | | | | | | | | | | | | | | | | | While doing an allyesconfig build, I noticed that the commit commit 8cdfd2519c6c9a1e6057dc5970b2542b35895738 Author: Takashi Iwai <tiwai@suse.de> Date: Wed Sep 7 14:08:11 2005 +0200 [ALSA] Remove superfluous PCI ID definitions broke the RME32 and RME96 drivers, since the PCI IDs they use seem to have changed names. Here's a patch to fix this -- compile tested only, since I have no idea what the hardware even is. Fix the build of the RME32 and RME96 drivers by having them use the PCI_DEVICE_ID_RME_xxx names defined in <linux/pci_ids.h> instead of the PCI_DEVICE_ID_xxx names that they used to define themselves. Also fix the typo in the id PCI_DEVICE_IDRME__DIGI96_8_PAD_OR_PST so the name is PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ALSA] set owner field in struct pci_driverClemens Ladisch2005-09-12
| | | | | | | | | | | | | | | | AD1889 driver,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver ALI5451 driver,au88x0 driver,CS46xx driver,EMU10K1/EMU10K2 driver HDA Intel driver,ICE1712 driver,ICE1724 driver,KORG1212 driver MIXART driver,NM256 driver,RME HDSP driver,RME9652 driver Trident driver,Digigram VX222 driver,YMFPCI driver Set the module owner field in each driver's struct pci_driver to get the driver symlink in the sysfs device directory. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-18 15:55:04 -0500