aboutsummaryrefslogtreecommitdiffstats
path: root/sound/pci/hda/hda_codec.c
Commit message (Collapse)AuthorAge
* ALSA: hda - Disable sticky PCM stream assignment for AD codecsTakashi Iwai2010-10-25
| | | | | | | | | | | The sticky PCM stream assignment introduced in 2.6.36 kernel seems causing problems on AD codecs. At some time later, the streaming no longer works by unknown reason. A simple workaround is to disable sticky-assignment for these codecs. Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add workarounds for CT-IBG controllersTakashi Iwai2010-10-22
| | | | | | | | | Creative IBG controllers require the playback stream-tags to be started from 1, instead of capture+1. Otherwise the stream stalls. Reported-by: Wai Yew CHAY <wychay@ctl.creative.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: tlv - Define numbers in sound/tlv.hTakashi Iwai2010-10-17
| | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: HDA: Sigmatel: work around incorrect master mutingClemens Ladisch2010-10-17
| | | | | | | | | | | | | | | | | | The HDA specification does not allow for a codec to mute itself just because the volume is reduced, so _of course_ somebody had to go and do it. This wouldn'\''t hurt too much when the volume is adjusted by hand, but programs like PA that try to set the volume automatically could inadvertently mute the output. To work around this, change the TLV dB information for the Master volume on all Sigmatel HDA codecs to indicate the the minimal volume setting actually mutes. Reported-by: Colin Guthrie <gmane@colin.guthr.ie> Reported-by: "Alexander E. Patrakov" <patrakov@gmail.com> Tested-by: Colin Guthrie <cguthrie@mandriva.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Introduce hda_call_check_power_status() helperTakashi Iwai2010-09-21
| | | | | | | Replace the explicit ifdef check and call of check_power_status ops with a new helper function, hda_call_check_power_status(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Make snd_hda_get_input_pin_attr() helperTakashi Iwai2010-09-17
| | | | | | | | Make the helper function to give the input-pin attribute for jack connectivity and location. This simplifies checks of input-pin jacks a bit in some places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix mic attribute check for internal micsTakashi Iwai2010-09-17
| | | | | | | Now Windows claims that the BIOS sets pins for internal mics to be BOTH connection instead of FIXED. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Sort input pins in snd_hda_parse_pin_def_config()Takashi Iwai2010-09-09
| | | | | | | Sort inputs[] array in autocfg so that the codec parsers can filter out easily per input pin types. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add comments to new helper functionsTakashi Iwai2010-09-09
| | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Reduce redundant mic location prefix in input source labelsTakashi Iwai2010-09-09
| | | | | | | When the mic pins are assigned to the same location, we can omit the redundant location prefix like "Front" or "Rear". Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Improve the input source name labelsTakashi Iwai2010-09-09
| | | | | | | | This patch improves the input-source label strings to be generated from the pin information instead of fixed strings per AUTO_PIN_* type. This gives more suitable labels, especially for mic and line-in pins. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Remove AUTO_PIN_FRONT_{MIC|LINE}Takashi Iwai2010-09-09
| | | | | | | | We can assign multiple pins to a single role now, let's reduce the redundant FRONT_MIC and FRONT_LINE. Also, autocfg->input_pins[] is no longer used, so this is removed as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Keep char arrays in input_mux itemsTakashi Iwai2010-09-09
| | | | | | | | Keep char array in the input_mux item itself instead of pointing to an external string. This is a preliminary work for improving the input-mux name based on the pin role. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Clear left-over hp_pins in snd_hda_parse_pin_def_config()Takashi Iwai2010-09-08
| | | | | | | | In snd_hda_parse_def_config(), some unused values may remain in hp_pins[] array during the headphone-reassignment workaround. This patch clears the unused array members. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-09-08
|\
| * ALSA: hda - Fix wrong HP pin detection in snd_hda_parse_pin_def_config()Takashi Iwai2010-09-08
| | | | | | | | | | | | | | | | | | | | | | | | snd_hda_parse_pin_def_config() has some workaround for re-assigning some pins declared as headphones to line-outs. This didn't work properly for some cases because it used memmove() stupidly wrongly. Reference: Novell bnc#637263 https://bugzilla.novell.com/show_bug.cgi?id=637263 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Add snd_hda_get_input_pin_label() helper functionTakashi Iwai2010-08-30
| | | | | | | | | | | | | | Added snd_hda_get_input_pin_label() helper function to return the string that can be used for control or capture-source ids. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Add inputs[] to auto_pin_cfg structTakashi Iwai2010-08-30
|/ | | | | | | | | | Added the new fields to contain all input-pins to struct auto_pin_cfg. Unlike the existing input_pins[], this array contains all input pins even if the multiple pins are assigned for a single role (i.e. two front mics). The former input_pins[] still remains for a while, but will be removed in near future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix stream and channel-ids codec-bus wideTakashi Iwai2010-08-20
| | | | | | | | | | | | | | | | The new sticky PCM parameter introduced the delayed clean-ups of stream- and channel-id tags. In the current implementation, this check (adding dirty flag) and actual clean-ups are done only for the codec chip. However, with HD-audio architecture, multiple codecs can be on a single bus, and the controller assign stream- and channel-ids in the bus-wide. In this patch, the stream-id and channel-id are checked over all codecs connected to the corresponding bus. Together with it, the mutex is moved to struct hda_bus, as this becomes also bus-wide. Reported-and-tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix dynamic ADC change working againTakashi Iwai2010-08-13
| | | | | | | | | | | | | | | The commit eb541337b7a43822fce7d0c9d967ee149b2d9a96 ALSA: hda - Make converter setups sticky changes the semantics of snd_hda_codec_cleanup_stream() not to clean up the stream at that moment but delay the action. This broke the codes expecting that the clean-up is done immediately, such as dynamic ADC changes in some codec drivers. This patch fixes the issue by introducing a lower helper, __snd_hda_codec_cleanup_stream(), to allow the immediate clean up. The original snd_hda_codec_cleanup_stream() is kept as is now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Make converter setups stickyTakashi Iwai2010-08-06
| | | | | | | | | | | | | | So far, we reset the converter setups like the stream-tag, the channel-id and format-id in prepare callbacks, and clear them in cleanup callbacks. This often causes a silence of the digital receiver for a couple of seconds. This patch tries to delay the converter setup changes as much as possible. The converter setups are cached and aren't reset as long as the same values are used. At suspend/resume, they are cleared to be recovered properly, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/misc' into for-linusTakashi Iwai2010-08-05
|\
| * ALSA: hda-intel - fix function_id rework (add missing bitmask)Jaroslav Kysela2010-07-20
| | | | | | | | Signed-off-by: Jaroslav Kysela <perex@perex.cz>
| * ALSA: hda-intel - do not mix audio and modem function IDsJaroslav Kysela2010-07-19
| | | | | | | | | | | | | | The function IDs are different for audio and modem. Do not mix them. Also, show the unsolicited bit in the function_id register. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* | ALSA: hda - Define AC_FMT_* constantsTakashi Iwai2010-08-03
| | | | | | | | | | | | | | Define constants for the HD-audio stream format bits, and replace the magic numbers in codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Set Stream Type in Stream Format according to AES0Anssi Hannula2010-08-03
| | | | | | | | | | | | | | | | | | | | Set bit 15 (Stream Type) of HDA Stream Format to 1 (Non-PCM) when IEC958 channel status bit 1 (AES0 & 0x02) is set to 1 (non-audio). This is a prequisite for HDMI HBR passthrough. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Make error messages more verboseTakashi Iwai2010-07-30
| | | | | | | | | | | | | | Add a prefix and more information for error messages regarding the connection-list in hda_codec.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fix max amp cap calculation for IDT/STAC codecsTakashi Iwai2010-07-26
| | | | | | | | | | | | | | | | | | The commit afbd9b8448f4b7d15673c6858012f384f18d28b8 ALSA: hda - Limit the amp value to write introduced a regression for codec setups with amp offsets like IDT/STAC codecs. The limit value should be a raw value without offset calculation. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-07-09
|\ \
| * | ALSA: hda - Restore cleared pin controls on resumeTakashi Iwai2010-07-09
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many codecs now clear the pin controls at suspend via snd_hda_shutup_pins() for reducing the click noise at power-off. But this leaves some pins uninitialized, and they'll be never recovered after resume. This patch adds the proper recovery of cleared pin controls on resume. Also it adds a check of bus->shutdown so that pins won't be cleared at module unloading. Reference: Kernel bug 16339 http://bugzilla.kernel.org/show_bug.cgi?id=16339 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* / ALSA: hda - Limit the amp value to writeTakashi Iwai2010-07-09
|/ | | | | | | | Check the amp max value at put callbacks and set the upper limit so that the driver won't write any invalid value over the defined range. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - introduce snd_hda_codec_update_cache()Takashi Iwai2010-03-30
| | | | | | | | | | Add a new helper, snd_hda_codec_update_cache(), for reducing the unneeded verbs. This function checks the cached value and skips if it's identical with the given one. Otherwise it works like snd_hda_codec_write_cache(). The alc269 code uses this function as an example. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Report errors when invalid values are passed to snd_hda_amp_*()Takashi Iwai2010-03-29
| | | | | | The values should be in 8 bits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Take internal mic as Front MicKailang Yang2010-03-19
| | | | | | | | | | Add new check for MIC. Do the internal DMIC as the Front MIC. It could solve the default record source index issue. [Fix the check properly using the bitmask by tiwai] Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Add an error message for invalid mapping NIDTakashi Iwai2010-03-15
| | | | | | | | | Add an error message to snd_hda_add_nid() for invalid mapping NID to make easier to hunt the buggy code. Also added a missing space to the error message in snd_hda_build_controls() Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: sound/pci/hda/hda_codec.c: various coding style fixesNorberto Lopes2010-03-02
| | | | | | Signed-off-by: Norberto Lopes <nlopes.ml@gmail.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - remove unnecessary msleep on power state transitionsZhang, Rui2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will save ~15ms boot time. The first 10ms sleep was introduced in commit d2595d86e5 for (buggy) Cxt codecs, so better to limit the sleep to the problem hardware. For the second 10ms sleep, the HDA spec says: Power State[1:0]: 00: Node Power state (D0) is fully on. 01: Node Power state (D1) allows for (does not require) the lowest possible power consuming state from which it can return to the "fully on" state (D0) within 10 ms, excepting analog pass through circuits (e.g., CD analog playback) which must remain fully on. 10: Node Power state (D2) allows for (does not require) the lowest possible power consuming state from which it can return to the "fully on" state (D0) within 10 ms. For modems, this is the "wake on ring" power state. 11: Node Power state (D3) allows for (does not require) lowest possible power consuming state under software control. Note that any low power state set by software must retain sufficient operational capability to properly respond to subsequent software Power State command. So 10ms is actually the max wait time. It should be safe to remove/reduce it and rely on the loop of 1ms-sleeps. CC: Marc Boucher <marc@linuxant.com> CC: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Define max number of PCM devices in hda_codec.hTakashi Iwai2010-01-28
| | | | | | Define the constant rather in the common header file. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-01-19
|\ | | | | | | | | Conflicts: sound/pci/hda/patch_realtek.c
| * ALSA: hda - Disable tigger at pin-sensing on AD codecsTakashi Iwai2009-12-25
| | | | | | | | | | | | | | | | | | | | | | | | Analog Device codecs seem to have problems with the triggering of pin-sensing although their pincaps give the trigger requirements. Some reported that constant CPU load on HP laptops with AD codecs. For avoiding this regression, add a flag to codec struct to notify explicitly that the codec doesn't suppot the trigger at pin-sensing. Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Add sanity check for storing the user-defined pin configsTakashi Iwai2009-12-27
| | | | | | | | | | | | | | Check whether the given NID is a pin widget before storing the user-defined pin configs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Add snd_hda_shutup_pins() helper functionTakashi Iwai2009-12-27
| | | | | | | | | | | | | | Add a common helper function for clearing pin controls before suspend. Use the pincfg array instead of looking through all widget tree. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2009-12-25
|\|
| * ALSA: hda - Set mixer name after codec patchTakashi Iwai2009-12-23
| | | | | | | | | | | | | | Postpone the mixer name setup after the codec patch since the codec patch may change the codec name string in itself. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Fix NID association for capture mixersTakashi Iwai2009-12-23
| | | | | | | | | | | | | | | | Fix the wrong implementation of NID <-> kctl mapping for capture mixers introduced by the ocmmit 5b0cb1d850c26893b1468b3a519433a1b7a176be. So far, the driver returns an error at probe. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - simplify usage of HDA_SUBDEV_AMP_FLAGJaroslav Kysela2009-12-15
| | | | | | | | | | | | | | The HDA_SUBDEV_NID_FLAG is duplicate for amplifier control elements. Move get_amp_nid_() call to the snd_hda_ctl_add() function. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* | ALSA: hda - introduce HDA_SUBDEV_AMP_FLAG (ControlAmp in proc)Jaroslav Kysela2009-12-15
| | | | | | | | | | | | | | | | | | | | | | | | The purpose of this changeset is to show information about amplifier setting in the codec proc file. Something like: Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* | ALSA: hda - add more NID->Control mappingJaroslav Kysela2009-12-15
|/ | | | | | | | This set of changes add missing NID values to some static control elemenents. Also, it handles all "Capture Source" or "Input Source" controls. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* ALSA: hda - introduce snd_hda_jack_detect() and snd_hda_pin_sense()Wu Fengguang2009-11-18
| | | | | | | | | This helps merge duplicate code. v2: add snd_hda_jack_detect() and comments recommended by Takashi. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix build errors with CONFIG_SND_HDA_INPUT_BEEP=nTakashi Iwai2009-11-16
| | | | | | Disable beep-related codes when CONFIG_SND_HDA_INPUT_BEEP isn't set. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-24 05:13:17 -0500