aboutsummaryrefslogtreecommitdiffstats
path: root/sound/isa/es18xx.c
Commit message (Collapse)AuthorAge
* [ALSA] add the ESS1879 pnpbios ID to the es18xx driverRene Herman2007-10-16
| | | | | | | | | | | As reported by Troy Heidner, the 'Gateway Solo 5150' laptop (for one) has an onboard ESS1879 that identifies itself through PNPBIOS as just that. He also confirmed that other than not knowing about it, snd-es18xx drives the chip fine, so this adds the ID to the driver. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Clean up with common snd_ctl_boolean_*_info callbacksTakashi Iwai2007-10-16
| | | | | | | Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix probe of non-PnP ISA devicesRene Herman2007-05-16
| | | | | | | | | isa_register_driver() returns an error if no device is found and it's no fatal error for the drivers with pnp support. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] isa_bus device/driver namingRene Herman2007-05-11
| | | | | | | | isa_bus: delete snd_ prefix from the (sysfs visible) device/driver names. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Port the rest of ALSA ISA drivers to isa_driverTakashi Iwai2007-05-11
| | | | | | | | Port the rest of ALSA ISA drivers to use isa_driver framework instead of platform_driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix memory leak in sound/isa/es18xx.cEric Sesterhenn2006-10-06
| | | | | | | | Fixed a memory leak in the error patch. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [ALSA] es18xx - Add PnP BIOS supportOndrej Zary2006-09-23
| | | | | | | | | | | This patch adds PnP BIOS support to es18xx driver. It allows ESS ES18xx sound chips integrated in some notebooks (such as DTK FortisPro TOP-5A) that don't appear as ISA cards (they aren't recognized by ISA PnP, only by PnP BIOS) to 'just work' automatically. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [PATCH] irq-flags: sound: Use the new IRQF_ constantsThomas Gleixner2006-07-02
| | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 64bit resource: fix up printks for resources in sound driversGreg Kroah-Hartman2006-06-27
| | | | | | | | | | This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] es18xx build fixAndrew Morton2006-05-21
| | | | | | | | | | sound/isa/es18xx.c: In function `snd_es18xx_identify': sound/isa/es18xx.c:1606: warning: implicit declaration of function `udelay' Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ALSA] unregister platform device again if probe was unsuccessfulRene Herman2006-04-12
| | | | | | | | | Unregister the platform device again if the probe was unsuccessful. This restores the behaviour of not loading the driver on probe() failure. Signed-off-by: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] continue on IS_ERR from platform device registrationRene Herman2006-04-12
| | | | | | | | | | Continue with the next one on error from device registration. This would seem the correct thing to do, even if it's not the probe() error that we're getting. Signed-off-by: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [PATCH] PNP: adjust pnp_register_card_driver() signature: es18xxBjorn Helgaas2006-03-27
| | | | | | | | | | | | Remove the assumption that pnp_register_card_driver() returns the number of devices claimed. And fix some __init/__devinit issues. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Jaroslav Kysela <perex@suse.cz> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ALSA] fix some memory leaksAdrian Bunk2006-03-22
| | | | | | | | | Modules: Generic drivers,ES18xx driver,CS46xx driver This patch fixes two memory leaks spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Fix check of enable module optionTakashi Iwai2006-03-22
| | | | | | | Fix the check of enable module option in probe of platform_device drivers. It shouldn't break the loop but just ignore if enable[i] is false. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] #4/4 for Zoom Video - add Zoom Video supportMark Salazar2006-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modules: ES18xx driver Forth of 4 es18xx.c patches culminating in Zoom Video support. This patch adds Zoom Video support for those chipsets that support it. Testing: This work was initially done on the source from the Debian Sarge ALSA package, then tested on an ES1879. I could not test the Zoom Video function for an ES1878 or ES1869. Patches were created against the Sarge code and then edited to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs code was test for successful compilation. No additional testing was done on the ALSA cvs version. One quirk (noted in my comments below) is that apparently the datasheet is wrong for one of the ES1879 Zoom Video 'enable' bits, because 1) if you set this bit it messes up PCM playback (speaker_test play a lower frequency) 2) even if you don't set this bit Zoom Video still works. I added a control to toggle the bit on just in case there might be a version of the ES1879 that requires it, but I expect noone will need it. Signed-off-by: Mark Salazar <markTheCoder@justmyself.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] #3/4 for Zoom Video - change Hardware Volume interrupt handlingMark Salazar2006-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modules: ES18xx driver Third of 4 es18xx.c patches culminating in Zoom Video support. This patch changes the Hardware Volume support to reflect the fact that not all of the supported chipsets have seperate registers dedicated to the Hardware Volume inputs. Although all the chipsets can generate an HWV interrupt whenever a Hardware Volume input is received only those with seperate HWV registers can split the HWV registers from the Master volume registers. Testing: This work was initially done on the source from the Debian Sarge ALSA package, then tested on an ES1879 and an ES1878 machine. Patches were created against the Sarge code and then edited to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs code was test for successful compilation. No additional testing was done on the ALSA cvs version. Signed-off-by: Mark Salazar <markTheCoder@justmyself.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] #2/4 for Zoom Video - resolve number of record sourcesMark Salazar2006-03-22
| | | | | | | | | | | | | | | | | | | | | | | Modules: ES18xx driver Second of 4 es18xx.c patches culminating in Zoom Video support. This patch changes the 'record source' mux routines to reflect the fact that not all of the supported chipsets have 8 possible inputs. Some have 4 and some have 5. Testing: This work was initially done on the source from the Debian Sarge ALSA package, then tested on an ES1879 and an ES1878 machine. Patches were created against the Sarge code and then edited to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs code was test for successful compilation. No additional testing was done on the ALSA cvs version. Signed-off-by: Mark Salazar <markTheCoder@justmyself.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] #1/4 for Zoom Video - resolve common vs chipset specific mixer controlsMark Salazar2006-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modules: ES18xx driver First of 4 es18xx.c patches culminating in Zoom Video support. While adding support for Zoom Video to the es18xx driver I found some of the mixer controls were wrong. Since you guys went to the trouble of supplying the datasheets for the supported chipsets I did a review of all of them and tried to get es18xx.c to accurately reflect the proper mixer controls for each chipset. If the datasheets are wrong then so are my patches. This first patch moves some controls from the common-to-all-chipsets array 'snd_es18xx_base_controls' to a chipset-specific array and adds code to manage that new array. Also while testing on my ES1878 test machine I discovered it needed a couple of udelays in the identify function so those are in this patch as well. Testing: This work was initially done on the source from the Debian Sarge ALSA package, then tested on an ES1879 and an ES1878 machine. Patches were created against the Sarge code and then edited to apply correctly to the ALSA cvs code. Lastly the patched ALSA cvs code was test for successful compilation. No additional testing was done on the ALSA cvs version. Signed-off-by: Mark Salazar <markTheCoder@justmyself.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Fix compilation without CONFIG_PNPTakashi Iwai2006-01-22
| | | | | | Fix compilation of some ISA drivers without CONFIG_PNP. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] unregister platform devicesClemens Ladisch2006-01-03
| | | | | | | Call platform_device_unregister() for all platform devices that we've registered. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] es18xx - Use platform_deviceTakashi Iwai2006-01-03
| | | | | | | | Modules: ES18xx driver Rewrite the probe/remove with platform_device. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove xxx_t typedefs: ISA ES18xxTakashi Iwai2006-01-03
| | | | | | | | Modules: ES18xx driver Remove xxx_t typedefs from the ISA ES18xx driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove superfluous pcm_free callbacksTakashi Iwai2006-01-03
| | | | | | Remove superflous pcm_free callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Add missing KERN_* suffix to printkTakashi Iwai2005-11-04
| | | | | | Add missing KERN_* suffix to printk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Remove vmalloc wrapper, kfree_nocheck()Takashi Iwai2005-11-04
| | | | | | | | - Remove vmalloc wrapper - Add release_and_free_resource() to remove kfree_nocheck() from each driver and simplify the code Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Replace with kzalloc() - isa stuffTakashi Iwai2005-09-12
| | | | | | | | | ES18xx driver,OPL3SA2 driver,AD1816A driver,AD1848 driver,CS4231 driver ES1688 driver,GUS Library,Opti9xx drivers,EMU8000 driver SB16/AWE driver,SB drivers Replace kcalloc(1,..) with kzalloc(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] Add snd_card_set_generic_dev() call to ISA driversTakashi Iwai2005-09-12
| | | | | | | | | | | | | ISA,CMI8330 driver,ES18xx driver,OPL3SA2 driver,Sound Galaxy driver Sound Scape driver,AD1848 driver,CS4231 driver,CS4236+ driver ES1688 driver,GUS Classic driver,GUS Extreme driver,GUS MAX driver AMD InterWave driver,Opti9xx drivers,SB16/AWE driver,SB8 driver Wavefront drivers - Added snd_card_set_generic_dev() call. - Added SND_GENERIC_DRIVER to Kconfig. - Clean up the error path in probe if necessary. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-16
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-23 12:40:47 -0500