aboutsummaryrefslogtreecommitdiffstats
path: root/security
Commit message (Collapse)AuthorAge
* [NETLINK]: Neighbour table configuration and statistics via rtnetlinkThomas Graf2005-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | To retrieve the neighbour tables send RTM_GETNEIGHTBL with the NLM_F_DUMP flag set. Every neighbour table configuration is spread over multiple messages to avoid running into message size limits on systems with many interfaces. The first message in the sequence transports all not device specific data such as statistics, configuration, and the default parameter set. This message is followed by 0..n messages carrying device specific parameter sets. Although the ordering should be sufficient, NDTA_NAME can be used to identify sequences. The initial message can be identified by checking for NDTA_CONFIG. The device specific messages do not contain this TLV but have NDTPA_IFINDEX set to the corresponding interface index. To change neighbour table attributes, send RTM_SETNEIGHTBL with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3], NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked otherwise. Device specific parameter sets can be changed by setting NDTPA_IFINDEX to the interface index of the corresponding device. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* AUDIT: Fix remaining cases of direct logging of untrusted strings by avc_auditStephen Smalley2005-05-24
| | | | | | | | | | | | | | | Per Steve Grubb's observation that there are some remaining cases where avc_audit() directly logs untrusted strings without escaping them, here is a patch that changes avc_audit() to use audit_log_untrustedstring() or audit_log_hex() as appropriate. Note that d_name.name is nul- terminated by d_alloc(), and that sun_path is nul-terminated by unix_mkname(), so it is not necessary for the AVC to create nul- terminated copies or to alter audit_log_untrustedstring to take a length argument. In the case of an abstract name, we use audit_log_hex() with an explicit length. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* Fix oops due to thinko in avc_audit()David Woodhouse2005-05-21
| | | | | | | When I added the logging of pid= and comm= back to avc_audit() I screwed it up. Put it back how it should be. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* AUDIT: Avoid sleeping function in SElinux AVC audit.Stephen Smalley2005-05-20
| | | | | | | | | | This patch changes the SELinux AVC to defer logging of paths to the audit framework upon syscall exit, by saving a reference to the (dentry,vfsmount) pair in an auxiliary audit item on the current audit context for processing by audit_log_exit. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitDavid Woodhouse2005-05-19
|\
| * [PATCH] selinux: fix avc_alloc_node() oom with no policy loadedStephen Smalley2005-05-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch should fix the avc_alloc_node() oom condition that Andrew reported when no policy is loaded in SELinux. Prior to this patch, when no policy was loaded, the SELinux "security server" (policy engine) was only returning allowed decisions for the requested permissions for each access check. This caused the cache to thrash when trying to use SELinux for real work with no policy loaded (typically, the no policy loaded state is only for bootstrapping to the point where we can load an initial policy). This patch changes the SELinux security server to return the complete allowed access vector at once, and then to reset the cache after the initial policy load to flush the initial cache state created during bootstrapping. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Restore logging of pid= and comm= in AVC audit messagesDavid Woodhouse2005-05-19
| | | | | | | | | | | | | | | | | | We turned this all off because the 'exe=' was causing deadlocks on dcache_lock. There's no need to leave the pid and comm out though. They'll all be logged correctly if full auditing is enabled, but we should still print them in case auditing _isn't_ enabled. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | AUDIT: Treat all user messages identically.David Woodhouse2005-05-18
| | | | | | | | | | | | | | It's silly to have to add explicit entries for new userspace messages as we invent them. Just treat all messages in the user range the same. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | AUDIT: Add message types to audit recordsSteve Grubb2005-05-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds more messages types to the audit subsystem so that audit analysis is quicker, intuitive, and more useful. Signed-off-by: Steve Grubb <sgrubb@redhat.com> --- I forgot one type in the big patch. I need to add one for user space originating SE Linux avc messages. This is used by dbus and nscd. -Steve --- Updated to 2.6.12-rc4-mm1. -dwmw2 Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | Add audit_log_typeChris Wright2005-05-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add audit_log_type to allow callers to specify type and pid when logging. Convert audit_log to wrapper around audit_log_type. Could have converted all audit_log callers directly, but common case is default of type AUDIT_KERNEL and pid 0. Update audit_log_start to take type and pid values when creating a new audit_buffer. Move sequences that did audit_log_start, audit_log_format, audit_set_type, audit_log_end, to simply call audit_log_type directly. This obsoletes audit_set_type and audit_set_pid, so remove them. Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | The attached patch addresses the problem with getting the audit daemon Steve Grubb2005-05-06
|/ | | | | | | | | | | | | | | | | | | | | | | shutdown credential information. It creates a new message type AUDIT_TERM_INFO, which is used by the audit daemon to query who issued the shutdown. It requires the placement of a hook function that gathers the information. The hook is after the DAC & MAC checks and before the function returns. Racing threads could overwrite the uid & pid - but they would have to be root and have policy that allows signalling the audit daemon. That should be a manageable risk. The userspace component will be released later in audit 0.7.2. When it receives the TERM signal, it queries the kernel for shutdown information. When it receives it, it writes the message and exits. The message looks like this: type=DAEMON msg=auditd(1114551182.000) auditd normal halt, sending pid=2650 uid=525, auditd pid=1685 Signed-off-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [PATCH] SELinux: add finer grained permissions to Netlink audit processingJames Morris2005-05-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides finer grained permissions for the audit family of Netlink sockets under SELinux. 1. We need a way to differentiate between privileged and unprivileged reads of kernel data maintained by the audit subsystem. The AUDIT_GET operation is unprivileged: it returns the current status of the audit subsystem (e.g. whether it's enabled etc.). The AUDIT_LIST operation however returns a list of the current audit ruleset, which is considered privileged by the audit folk. To deal with this, a new SELinux permission has been implemented and applied to the operation: nlmsg_readpriv, which can be allocated to appropriately privileged domains. Unprivileged domains would only be allocated nlmsg_read. 2. There is a requirement for certain domains to generate audit events from userspace. These events need to be collected by the kernel, collated and transmitted sequentially back to the audit daemon. An example is user level login, an auditable event under CAPP, where login-related domains generate AUDIT_USER messages via PAM which are relayed back to auditd via the kernel. To prevent handing out nlmsg_write permissions to such domains, a new permission has been added, nlmsg_relay, which is intended for this type of purpose: data is passed via the kernel back to userspace but no privileged information is written to the kernel. Also, AUDIT_LOGIN messages are now valid only for kernel->user messaging, so this value has been removed from the SELinux nlmsgtab (which is only used to check user->kernel messages). Signed-off-by: James Morris <jmorris@redhat.com> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] SELinux: cleanup ipc_has_permStephen Smalley2005-05-01
| | | | | | | | | | | | This patch removes the sclass argument from ipc_has_perm in the SELinux module, as it can be obtained from the ipc security structure. The use of a separate argument was a legacy of the older precondition function handling in SELinux and is obsolete. Please apply. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [SELINUX]: Fix ipv6_skip_exthdr() invocation causing OOPS.Herbert Xu2005-04-24
| | | | | | | | | | | | | | | | | | The SELinux hooks invoke ipv6_skip_exthdr() with an incorrect length final argument. However, the length argument turns out to be superfluous. I was just reading ipv6_skip_exthdr and it occured to me that we can get rid of len altogether. The only place where len is used is to check whether the skb has two bytes for ipv6_opt_hdr. This check is done by skb_header_pointer/skb_copy_bits anyway. Now it might appear that we've made the code slower by deferring the check to skb_copy_bits. However, this check should not trigger in the common case so this is OK. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] SELinux: fix deadlock on dcache lockStephen Smalley2005-04-18
| | | | | | | | | | | | | | | | | | | | This fixes a deadlock on the dcache lock detected during testing at IBM by moving the logging of the current executable information from the SELinux avc_audit function to audit_log_exit (via an audit_log_task_info helper) for processing upon syscall exit. For consistency, the patch also removes the logging of other task-related information from avc_audit, deferring handling to audit_log_exit instead. This allows simplification of the avc_audit code, allows the exe information to be obtained more reliably, always includes the comm information (useful for scripts), and avoids including bogus task information for checks performed from irq or softirq. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] SELinux: add support for NETLINK_KOBJECT_UEVENTJames Morris2005-04-16
| | | | | | | | | | | | | | | | This patch adds SELinux support for the KOBJECT_UEVENT Netlink family, so that SELinux can apply finer grained controls to it. For example, security policy for hald can be locked down to the KOBJECT_UEVENT Netlink family only. Currently, this family simply defaults to the default Netlink socket class. Note that some new permission definitions are added to sync with changes in the core userspace policy package, which auto-generates header files. Signed-off-by: James Morris <jmorris@redhat.com> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] SELinux: fix bug in Netlink message type detectionJames Morris2005-04-16
| | | | | | | | | | | | This patch fixes a bug in the SELinux Netlink message type detection code, where the wrong constant was being used in a case statement. The incorrect value is not valid for this class of object so it would not have been reached, and fallen through to a default handler for all Netlink messages. Signed-off-by: James Morris <jmorris@redhat.com> Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-16
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!