aboutsummaryrefslogtreecommitdiffstats
path: root/net
Commit message (Collapse)AuthorAge
* net: preserve ifreq parameter when calling generic phy_mii_ioctl().Richard Cochran2010-07-18
| | | | | | | | | | | | The phy_mii_ioctl() function unnecessarily throws away the original ifreq. We need access to the ifreq in order to support PHYs that can perform hardware time stamping. Two maverick drivers filter the ioctl commands passed to phy_mii_ioctl(). This is unnecessary since phylib will check the command in any case. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)Pedro Garcia2010-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Without the 8021q module loaded in the kernel, all 802.1p packets (VLAN 0 but QoS tagging) are silently discarded (as expected, as the protocol is not loaded). - Without this patch in 8021q module, these packets are forwarded to the module, but they are discarded also if VLAN 0 is not configured, which should not be the default behaviour, as VLAN 0 is not really a VLANed packet but a 802.1p packet. Defining VLAN 0 makes it almost impossible to communicate with mixed 802.1p and non 802.1p devices on the same network due to arp table issues. - Changed logic to skip vlan specific code in vlan_skb_recv if VLAN is 0 and we have not defined a VLAN with ID 0, but we accept the packet with the encapsulated proto and pass it later to netif_rx. - In the vlan device event handler, added some logic to add VLAN 0 to HW filter in devices that support it (this prevented any traffic in VLAN 0 to reach the stack in e1000e with HW filter under 2.6.35, and probably also with other HW filtered cards, so we fix it here). - In the vlan unregister logic, prevent the elimination of VLAN 0 in devices with HW filter. - The default behaviour is to ignore the VLAN 0 tagging and accept the packet as if it was not tagged, but we can still define a VLAN 0 if desired (so it is backwards compatible). Signed-off-by: Pedro Garcia <pedro.netdev@dondevamos.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove MAX_SOCK_ADDR constantTetsuo Handa2010-07-18
| | | | | | | | | MAX_SOCK_ADDR is no longer used because commit 230b1839 "net: Use standard structures for generic socket address structures." replaced "char address[MAX_SOCK_ADDR];" with "struct sockaddr_storage address;". Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dccp: fix sign bugKulikov Vasiliy2010-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'gap' is unsigned, so this code is wrong: gap = -new_head; ... if (gap > 0) { ... } Make 'gap' signed. The semantic patch that finds this problem (many false-positive results): (http://coccinelle.lip6.fr/) // <smpl> @ r1 @ identifier f; @@ int f(...) { ... } @@ identifier r1.f; type T; unsigned T x; @@ *x = f(...) ... *x > 0 Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fix sign bugKulikov Vasiliy2010-07-15
| | | | | | | | | | | ipv6_skip_exthdr() can return error code that is below zero. 'offset' is unsigned, so it makes no sense. ipv6_skip_exthdr() returns 'int' so we can painlessly change type of offset to int. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Net: ethernet: pe2.c: fix EXPORT_SYMBOL macro code style issueChihau Chau2010-07-14
| | | | | | | | | This patch fix a code style issue, if a function is exported, the EXPORT_SYMBOL macro for it should follow immediately after the closing function brace line. Signed-off-by: Chihau Chau <chihau@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/sched: potential data corruptionDan Carpenter2010-07-14
| | | | | | | | | | | | | | | | | | | | The reset_policy() does: memset(d->tcfd_defdata, 0, SIMP_MAX_DATA); strlcpy(d->tcfd_defdata, defdata, SIMP_MAX_DATA); In the original code, the size of d->tcfd_defdata wasn't fixed and if strlen(defdata) was less than 31, reset_policy() would cause memory corruption. Please Note: The original alloc_defdata() assumes defdata is 32 characters and a NUL terminator while reset_policy() assumes defdata is 31 characters and a NUL. This patch updates alloc_defdata() to match reset_policy() (ie a shorter string). I'm not very familiar with this code so please review carefully. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵John W. Linville2010-07-13
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/wl12xx/wl1271_cmd.h
| * cfg80211: ignore spurious deauthJohannes Berg2010-07-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ever since mac80211/drivers are no longer fully in charge of keeping track of the auth status, trying to make them do so will fail. Instead of warning and reporting the deauthentication to userspace, cfg80211 must simply ignore it so that spurious deauthentications, e.g. before starting authentication, aren't seen by userspace as actual deauthentications. Cc: stable@kernel.org Reported-by: Paul Stewart <pstew@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: remove wep dependencyJohn W. Linville2010-07-08
| | | | | | | | | | | | | | | | | | | | | | | | | | The current mac80211 code assumes that WEP is always available. If WEP fails to initialize, ieee80211_register_hw will always fail. In some cases (e.g. FIPS certification), the cryptography used by WEP is unavailable. However, in such cases there is no good reason why CCMP encryption (or even no link level encryption) cannot be used. So, this patch removes mac80211's assumption that WEP (and TKIP) will always be available for use. Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * NET: nl80211, fix lock imbalance and netdev referencingJiri Slaby2010-07-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stanse found that nl80211_set_wiphy imporperly handles a lock and netdev reference and contains unreachable code. It is because there return statement isntead of assignment to result variable. Fix that. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jouni Malinen <j@w1.fi> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * minstrel_ht: fix check for downgrading of top2 rateMing Lei2010-07-02
| | | | | | | | | | | | | | | | | | The check should be against current top2 rate, instead of current top rate. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * minstrel_ht: fix updating rate with best probabilityMing Lei2010-07-02
| | | | | | | | | | | | | | | | | | The throughput should be considered when updating rate with best probability. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | net/irda: Remove unnecessary casts of private_dataJoe Perches2010-07-13
| | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/core: Remove unnecessary casts of private_dataJoe Perches2010-07-13
| | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: autoconvert trivial BKL users to private mutexArnd Bergmann2010-07-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sock_free() optimizationsEric Dumazet2010-07-12
| | | | | | | | | | | | | | | | Avoid two extra instructions in sock_free(), to reload skb->truesize and skb->sk Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | inet, inet6: make tcp_sendmsg() and tcp_sendpage() through inet_sendmsg() ↵Changli Gao2010-07-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and inet_sendpage() a new boolean flag no_autobind is added to structure proto to avoid the autobind calls when the protocol is TCP. Then sock_rps_record_flow() is called int the TCP's sendmsg() and sendpage() pathes. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- include/net/inet_common.h | 4 ++++ include/net/sock.h | 1 + include/net/tcp.h | 8 ++++---- net/ipv4/af_inet.c | 15 +++++++++------ net/ipv4/tcp.c | 11 +++++------ net/ipv4/tcp_ipv4.c | 3 +++ net/ipv6/af_inet6.c | 8 ++++---- net/ipv6/tcp_ipv6.c | 3 +++ 8 files changed, 33 insertions(+), 20 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
* | 9p: strlen() doesn't count the terminatorDan Carpenter2010-07-12
| | | | | | | | | | | | | | | | | | | | | | | | This is an off by one bug because strlen() doesn't count the NULL terminator. We strcpy() addr into a fixed length array of size UNIX_PATH_MAX later on. The addr variable is the name of the device being mounted. CC: stable@kernel.org Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/core: EXPORT_SYMBOL cleanupsEric Dumazet2010-07-12
| | | | | | | | | | | | | | | | | | CodingStyle cleanups EXPORT_SYMBOL should immediately follow the symbol declaration. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/ipv4: EXPORT_SYMBOL cleanupsEric Dumazet2010-07-12
| | | | | | | | | | | | | | | | | | CodingStyle cleanups EXPORT_SYMBOL should immediately follow the symbol declaration. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Document that dev_get_stats() returns the given pointerBen Hutchings2010-07-09
| | | | | | | | | | | | | | | | | | Document that dev_get_stats() returns the same stats pointer it was given. Remove const qualification from the returned pointer since the caller may do what it likes with that structure. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Get rid of rtnl_link_stats64 / net_device_stats unionBen Hutchings2010-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit be1f3c2c027cc5ad735df6a45a542ed1db7ec48b "net: Enable 64-bit net device statistics on 32-bit architectures" I redefined struct net_device_stats so that it could be used in a union with struct rtnl_link_stats64, avoiding the need for explicit copying or conversion between the two. However, this is unsafe because there is no locking required and no lock consistently held around calls to dev_get_stats() and use of the statistics structure it returns. In commit 28172739f0a276eb8d6ca917b3974c2edb036da3 "net: fix 64 bit counters on 32 bit arches" Eric Dumazet dealt with that problem by requiring callers of dev_get_stats() to provide storage for the result. This means that the net_device::stats64 field and the padding in struct net_device_stats are now redundant, so remove them. Update the comment on net_device_ops::ndo_get_stats64 to reflect its new usage. Change dev_txq_stats_fold() to use struct rtnl_link_stats64, since that is what all its callers are really using and it is no longer going to be compatible with struct net_device_stats. Eric Dumazet suggested the separate function for the structure conversion. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | atm/br2684: register notifier event for carrier signal changes.Karl Hiramoto2010-07-09
| | | | | | | | | | | | | | When a signal change event occurs call netif_carrier_on/off. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | atm: propagate signal changes via notifierKarl Hiramoto2010-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add notifier chain for changes in atm_dev. Clients like br2684 will call register_atmdevice_notifier() to be notified of changes. Drivers will call atm_dev_signal_change() to notify clients like br2684 of the change. On DSL and ATM devices it's usefull to have a know if you have a carrier signal. netdevice LOWER_UP changes can be propagated to userspace via netlink monitor. Signed-off-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | vlan: allow TSO setting on vlan interfacesEric Dumazet2010-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we need to shape traffic using low speeds, we need to disable tso on network interface : ethtool -K eth0.2240 tso off It seems vlan interfaces miss the set_tso() ethtool method. Before enabling TSO, we must check real device supports TSO for VLAN-tagged packets and enables TSO. Note that a TSO change on real device propagates TSO setting on all vlans, even if admin selected a different TSO setting. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gre: propagate ipv6 transport classStephen Hemminger2010-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes IPV6 over IPv4 GRE tunnel propagate the transport class field from the underlying IPV6 header to the IPV4 Type Of Service field. Without the patch, all IPV6 packets in tunnel look the same to QoS. This assumes that IPV6 transport class is exactly the same as IPv4 TOS. Not sure if that is always the case? Maybe need to mask off some bits. The mask and shift to get tclass is copied from ipv6/datagram.c Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2010-07-07
|\ \ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
| * | bridge: Clear IPCB before possible entry into IP stackHerbert Xu2010-07-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bridge protocol lives dangerously by having incestuous relations with the IP stack. In this instance an abomination has been created where a bogus IPCB area from a bridged packet leads to a crash in the IP stack because it's interpreted as IP options. This patch papers over the problem by clearing the IPCB area in that particular spot. To fix this properly we'd also need to parse any IP options if present but I'm way too lazy for that. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bridge br_multicast: BUG: unable to handle kernel NULL pointer dereferenceHerbert Xu2010-07-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Tue, Jul 06, 2010 at 08:48:35AM +0800, Herbert Xu wrote: > > bridge: Restore NULL check in br_mdb_ip_get Resend with proper attribution. bridge: Restore NULL check in br_mdb_ip_get Somewhere along the line the NULL check in br_mdb_ip_get went AWOL, causing crashes when we receive an IGMP packet with no multicast table allocated. This patch restores it and ensures all br_mdb_*_get functions use it. Reported-by: Frank Arnold <frank.arnold@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>
| * | xfrm: fix xfrm by MARK logicPeter Kosyh2010-07-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While using xfrm by MARK feature in 2.6.34 - 2.6.35 kernels, the mark is always cleared in flowi structure via memset in _decode_session4 (net/ipv4/xfrm4_policy.c), so the policy lookup fails. IPv6 code is affected by this bug too. Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'master' of ↵David S. Miller2010-07-03
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
| | * | netfilter: ip6t_REJECT: fix a dst leak in ipv6 REJECTEric Dumazet2010-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should release dst if dst->error is set. Bug introduced in 2.6.14 by commit e104411b82f5c ([XFRM]: Always release dst_entry on error in xfrm_lookup) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@kernel.org Signed-off-by: Patrick McHardy <kaber@trash.net>
| * | | net: decreasing real_num_tx_queues needs to flush qdiscJohn Fastabend2010-07-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reducing real_num_queues needs to flush the qdisc otherwise skbs with queue_mappings greater then real_num_tx_queues can be sent to the underlying driver. The flow for this is, dev_queue_xmit() dev_pick_tx() skb_tx_hash() => hash using real_num_tx_queues skb_set_queue_mapping() ... qdisc_enqueue_root() => enqueue skb on txq from hash ... dev->real_num_tx_queues -= n ... sch_direct_xmit() dev_hard_start_xmit() ndo_start_xmit(skb,dev) => skb queue set with old hash skbs are enqueued on the qdisc with skb->queue_mapping set 0 < queue_mappings < real_num_tx_queues. When the driver decreases real_num_tx_queues skb's may be dequeued from the qdisc with a queue_mapping greater then real_num_tx_queues. This fixes a case in ixgbe where this was occurring with DCB and FCoE. Because the driver is using queue_mapping to map skbs to tx descriptor rings we can potentially map skbs to rings that no longer exist. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ethtool: Fix potential user buffer overflow for ETHTOOL_{G, S}RXFHBen Hutchings2010-06-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | struct ethtool_rxnfc was originally defined in 2.6.27 for the ETHTOOL_{G,S}RXFH command with only the cmd, flow_type and data fields. It was then extended in 2.6.30 to support various additional commands. These commands should have been defined to use a new structure, but it is too late to change that now. Since user-space may still be using the old structure definition for the ETHTOOL_{G,S}RXFH commands, and since they do not need the additional fields, only copy the originally defined fields to and from user-space. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ethtool: Fix potential kernel buffer overflow in ETHTOOL_GRXCLSRLALLBen Hutchings2010-06-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a 32-bit machine, info.rule_cnt >= 0x40000000 leads to integer overflow and the buffer may be smaller than needed. Since ETHTOOL_GRXCLSRLALL is unprivileged, this can presumably be used for at least denial of service. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ipv6: fix NULL reference in proxy neighbor discoverystephen hemminger2010-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The addition of TLLAO option created a kernel OOPS regression for the case where neighbor advertisement is being sent via proxy path. When using proxy, ipv6_get_ifaddr() returns NULL causing the NULL dereference. Change causing the bug was: commit f7734fdf61ec6bb848e0bafc1fb8bad2c124bb50 Author: Octavian Purdila <opurdila@ixiacom.com> Date: Fri Oct 2 11:39:15 2009 +0000 make TLLAO option for NA packets configurable Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Bluetooth: Bring back var 'i' incrementGustavo F. Padovan2010-06-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ff6e2163f28a1094fb5ca5950fe2b43c3cf6bc7a accidentally added a regression on the bnep code. Fixing it. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | xfrm: check bundle policy existance before dereferencing itTimo Teräs2010-06-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the bundle validation code to not assume having a valid policy. When we have multiple transformations for a xfrm policy, the bundle instance will be a chain of bundles with only the first one having the policy reference. When policy_genid is bumped it will expire the first bundle in the chain which is equivalent of expiring the whole chain. Reported-bisected-and-tested-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net/ipv4/ip_output.c: Removal of unused variable in ip_fragment()George Kadianakis2010-07-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Removal of unused integer variable in ip_fragment(). Signed-off-by: George Kadianakis <desnacked@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: fix 64 bit counters on 32 bit archesEric Dumazet2010-07-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a small possibility that a reader gets incorrect values on 32 bit arches. SNMP applications could catch incorrect counters when a 32bit high part is changed by another stats consumer/provider. One way to solve this is to add a rtnl_link_stats64 param to all ndo_get_stats64() methods, and also add such a parameter to dev_get_stats(). Rule is that we are not allowed to use dev->stats64 as a temporary storage for 64bit stats, but a caller provided area (usually on stack) Old drivers (only providing get_stats() method) need no changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | ipv4: use skb_dst_copy() in ip_copy_metadata()Eric Dumazet2010-07-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid touching dst refcount in ip_fragment(). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | netdevice.h net/core/dev.c: Convert netdev_<level> logging macros to functionsJoe Perches2010-07-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduces an x86 defconfig text and data ~2k. text is smaller, data is larger. $ size vmlinux* text data bss dec hex filename 7198862 720112 1366288 9285262 8dae8e vmlinux 7205273 716016 1366288 9287577 8db799 vmlinux.device_h Uses %pV and struct va_format Format arguments are verified before printk Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge branch 'master' of ↵David S. Miller2010-07-03
|\ \ \ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
| * | | | bridge: add per bridge device controls for invoking iptablesPatrick McHardy2010-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support more fine grained control of bridge netfilter iptables invocation by adding seperate brnf_call_*tables parameters for each device using the sysfs interface. Packets are passed to layer 3 netfilter when either the global parameter or the per bridge parameter is enabled. Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * | | | netfilter: ipt_LOG/ip6t_LOG: add option to print decoded MAC headerPatrick McHardy2010-06-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LOG targets print the entire MAC header as one long string, which is not readable very well: IN=eth0 OUT= MAC=00:15:f2:24:91:f8:00:1b:24:dc:61:e6:08:00 ... Add an option to decode known header formats (currently just ARPHRD_ETHER devices) in their individual fields: IN=eth0 OUT= MACSRC=00:1b:24:dc:61:e6 MACDST=00:15:f2:24:91:f8 MACPROTO=0800 ... IN=eth0 OUT= MACSRC=00:1b:24:dc:61:e6 MACDST=00:15:f2:24:91:f8 MACPROTO=86dd ... The option needs to be explicitly enabled by userspace to avoid breaking existing parsers. Signed-off-by: Patrick McHardy <kaber@trash.net>
| * | | | netfilter: ipt_LOG/ip6t_LOG: remove comparison within loopPatrick McHardy2010-06-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the comparison within the loop to print the macheader by prepending the colon to all but the first printk. Based on suggestion by Jan Engelhardt <jengelh@medozas.de>. Signed-off-by: Patrick McHardy <kaber@trash.net>
| * | | | netfilter: complete the deprecation of CONFIG_NF_CT_ACCTTim Gardner2010-06-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_NF_CT_ACCT has been deprecated for awhile and was originally scheduled for removal by 2.6.29. Removing support for this config option also stops this deprecation warning message in the kernel log. [ 61.669627] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 61.669850] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 61.669852] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 61.669853] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> [Patrick: changed default value to 0] Signed-off-by: Patrick McHardy <kaber@trash.net>
| * | | | netfilter: xt_connbytes: Force CT accounting to be enabledTim Gardner2010-06-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check at rule install time that CT accounting is enabled. Force it to be enabled if not while also emitting a warning since this is not the default state. This is in preparation for deprecating CONFIG_NF_CT_ACCT upon which CONFIG_NETFILTER_XT_MATCH_CONNBYTES depended being set. Added 2 CT accounting support functions: nf_ct_acct_enabled() - Get CT accounting state. nf_ct_set_acct() - Enable/disable CT accountuing. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
| * | | | netfilter: fix simple typo in KConfig for netfiltert xt_TEEArnd Hannemann2010-06-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Destination was spelled wrong in KConfig. Signed-off-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-27 01:51:01 -0500