aboutsummaryrefslogtreecommitdiffstats
path: root/net
Commit message (Collapse)AuthorAge
* mac80211: IBSS join reworkAlina Friedrichsen2009-02-09
| | | | | | | | | | | | | | | | | I hold back this patch for around a week to avoid confusion. This is the second step of "mac80211: Fixed BSSID handling revisited". With it, in the situation of a strange merge to the same BSSID (e.g. caused by a TSF overflow) only reset_tsf() is called. And sta_info_flush_delayed() is only called if you change the network manually, not on an automatic BSSID merge. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Creating new IBSS with fixed BSSIDAlina Friedrichsen2009-02-09
| | | | | | | | | | | | | | | | This fixes a bug when creating a new IBSS network with a fixed BSSID. The fixed BSSID situation is now with one of my last patches handled in ieee80211_sta_find_ibss() function. It's more robust to test against (ifsta->flags & IEEE80211_STA_PREV_BSSID_SET), because ifsta->state is not seted right in every situation and so the creating of the new IBSS network sometimes hangs after the first try to scan for a network to merge. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Reset assoc_scan_tries after an unsuccessful scan runSujith2009-02-09
| | | | | | | | | | Trying to associate with a non-existent SSID stops the state machine after the first run. Subsequent association requests fail to start the scan engine. Fix this by resetting assoc_scan_tries to zero after completing a scan run. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* gro: Optimise TCP packet receptionHerbert Xu2009-02-08
| | | | | | | | | | | | | gro: Optimise TCP packet reception As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch uses bit ops to logical ops, as well as open coding memcmp to exploit alignment properties. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* gro: Optimise IPv4 packet receptionHerbert Xu2009-02-08
| | | | | | | | | | | | As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch does some obvious changes to use 2-byte and 4-byte operations instead of byte-oriented ones where possible. Bit ops are also used to replace logical ops to reduce branching. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* gro: Optimise Ethernet header comparisonHerbert Xu2009-02-08
| | | | | | | | | | | | | This patch optimises the Ethernet header comparison to use 2-byte and 4-byte xors instead of memcmp. In order to facilitate this, the actual comparison is now carried out by the callers of the shared dev_gro_receive function. This has a significant impact when receiving 1500B packets through 10GbE. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* gro: Remember number of held packets instead of counting every timeHerbert Xu2009-02-08
| | | | | | | | | This patch prepares for the move of the same_flow checks out of dev_gro_receive. As such we need to remember the number of held packets since doing a loop just to count them every time is silly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-02-07
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
| * 9p: fix endian issues [attempt 3]Eric Van Hensbergen2009-02-07
| | | | | | | | | | | | | | | | | | | | | | | | When the changes were done to the protocol last release, some endian bugs crept in. This patch fixes those endian problems and has been verified to run on 32/64 bit and x86/ppc architectures. This version of the patch incorporates the correct annotations for endian variables. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net_dma: call dmaengine_get only if NET_DMA enabledDavid S. Miller2009-02-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Based upon a patch from Atsushi Nemoto <anemo@mba.ocn.ne.jp> -------------------- The commit 649274d993212e7c23c0cb734572c2311c200872 ("net_dma: acquire/release dma channels on ifup/ifdown") added unconditional call of dmaengine_get() to net_dma. The API should be called only if NET_DMA was enabled. -------------------- Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Dan Williams <dan.j.williams@intel.com>
| * RxRPC: Fix a potential NULL dereferenceDavid Howells2009-02-07
| | | | | | | | | | | | | | | | | | | | | | | | Fix a potential NULL dereference bug during error handling in rxrpc_kernel_begin_call(), whereby rxrpc_put_transport() may be handed a NULL pointer. This was found with a code checker (http://repo.or.cz/w/smatch.git/). Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * udp: Fix potential wrong ip_hdr(skb) pointersJesper Dangaard Brouer2009-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | Like the UDP header fix, pskb_may_pull() can potentially alter the SKB buffer. Thus the saddr and daddr, pointers may point to the old skb->data buffer. I haven't seen corruptions, as its only seen if the old skb->data buffer were reallocated by another user and written into very quickly (or poison'd by SLAB debugging). Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
| * neigh: some entries can be skipped during dumpingGautam Kachroo2009-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | neightbl_dump_info and neigh_dump_table can skip entries if the *fill*info functions return an error. This results in an incomplete dump ((invoked by netlink requests for RTM_GETNEIGHTBL or RTM_GETNEIGH) nidx and idx should not be incremented if the current entry was not placed in the output buffer Signed-off-by: Gautam Kachroo <gk@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: Disallow rediculious flowlabel option sizes.David S. Miller2009-02-06
| | | | | | | | | | | | | | | | | | Just like PKTINFO, limit the options area to 64K. Based upon report by Eric Sesterhenn and analysis by Roland Dreier. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Revert "tcp: Always set urgent pointer if it's beyond snd_nxt"David S. Miller2009-02-05
| | | | | | | | | | | | | | | | This reverts commit 64ff3b938ec6782e6585a83d5459b98b0c3f6eb8. Jeff Chua reports that it breaks rlogin for him. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: Copy cork options in ip6_append_dataHerbert Xu2009-02-05
| | | | | | | | | | | | | | | | | | As the options passed to ip6_append_data may be ephemeral, we need to duplicate it for corking. This patch applies the simplest fix which is to memdup all the relevant bits. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * udp: Fix UDP short packet false positiveJesper Dangaard Brouer2009-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | The UDP header pointer assignment must happen after calling pskb_may_pull(). As pskb_may_pull() can potentially alter the SKB buffer. This was exposted by running multicast traffic through the NIU driver, as it won't prepull the protocol headers into the linear area on receive. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/sunrpc/xprtsock.c: some common code foundIlpo Järvinen2009-02-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | $ diff-funcs xs_udp_write_space net/sunrpc/xprtsock.c net/sunrpc/xprtsock.c xs_tcp_write_space --- net/sunrpc/xprtsock.c:xs_udp_write_space() +++ net/sunrpc/xprtsock.c:xs_tcp_write_space() @@ -1,4 +1,4 @@ - * xs_udp_write_space - callback invoked when socket buffer space + * xs_tcp_write_space - callback invoked when socket buffer space * becomes available * @sk: socket whose state has changed * @@ -7,12 +7,12 @@ * progress, otherwise we'll waste resources thrashing kernel_sendmsg * with a bunch of small requests. */ -static void xs_udp_write_space(struct sock *sk) +static void xs_tcp_write_space(struct sock *sk) { read_lock(&sk->sk_callback_lock); - /* from net/core/sock.c:sock_def_write_space */ - if (sock_writeable(sk)) { + /* from net/core/stream.c:sk_stream_write_space */ + if (sk_stream_wspace(sk) >= sk_stream_min_wspace(sk)) { struct socket *sock; struct rpc_xprt *xprt; $ codiff net/sunrpc/xprtsock.o net/sunrpc/xprtsock.o.new net/sunrpc/xprtsock.c: xs_tcp_write_space | -163 xs_udp_write_space | -163 2 functions changed, 326 bytes removed net/sunrpc/xprtsock.c: xs_write_space | +179 1 function changed, 179 bytes added net/sunrpc/xprtsock.o.new: 3 functions changed, 179 bytes added, 326 bytes removed, diff: -147 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6/addrconf: common code locatedIlpo Järvinen2009-02-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | $ codiff net/ipv6/addrconf.o net/ipv6/addrconf.o.new net/ipv6/addrconf.c: addrconf_notify | -267 1 function changed, 267 bytes removed net/ipv6/addrconf.c: add_addr | +86 1 function changed, 86 bytes added net/ipv6/addrconf.o.new: 2 functions changed, 86 bytes added, 267 bytes removed, diff: -181 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6/ndisc: join error pathsIlpo Järvinen2009-02-07
| | | | | | | | | | Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ax25: more common return path joiningIlpo Järvinen2009-02-07
| | | | | | | | | | | | Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipmr: use goto to common label instead of opencodingIlpo Järvinen2009-02-07
| | | | | | | | | | Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netlink: change return-value logic of netlink_broadcast()Pablo Neira Ayuso2009-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, netlink_broadcast() reports errors to the caller if no messages at all were delivered: 1) If, at least, one message has been delivered correctly, returns 0. 2) Otherwise, if no messages at all were delivered due to skb_clone() failure, return -ENOBUFS. 3) Otherwise, if there are no listeners, return -ESRCH. With this patch, the caller knows if the delivery of any of the messages to the listeners have failed: 1) If it fails to deliver any message (for whatever reason), return -ENOBUFS. 2) Otherwise, if all messages were delivered OK, returns 0. 3) Otherwise, if no listeners, return -ESRCH. In the current ctnetlink code and in Netfilter in general, we can add reliable logging and connection tracking event delivery by dropping the packets whose events were not successfully delivered over Netlink. Of course, this option would be settable via /proc as this approach reduces performance (in terms of filtered connections per seconds by a stateful firewall) but providing reliable logging and event delivery (for conntrackd) in return. This patch also changes some clients of netlink_broadcast() that may report ENOBUFS errors via printk. This error handling is not of any help. Instead, the userspace daemons that are listening to those netlink messages should resync themselves with the kernel-side if they hit ENOBUFS. BTW, netlink_broadcast() clients include those that call cn_netlink_send(), nlmsg_multicast() and genlmsg_multicast() since they internally call netlink_broadcast() and return its error value. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gro: Fix frag_list merging on imprecisely split packetsHerbert Xu2009-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous fix ad0f9904444de1309dedd2b9e365cae8af77d9b1 (gro: Fix handling of imprecisely split packets) only fixed the case of frags merging, frag_list merging in the same circumstances were still broken. In particular, the packet headers end up in the data stream. This patch fixes this plus another issue where an imprecisely split packet header may be read incorrectly (this is mostly harmless since it'll simply cause the packet to not match and be rejected for GRO). Thanks to Emil Tantilov and Jeff Kirsher for helping to track this down. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Reexport sock_alloc_send_pskbHerbert Xu2009-02-04
| | | | | | | | | | | | | | | | | | | | | | | | The function sock_alloc_send_pskb is completely useless if not exported since most of the code in it won't be used as is. In fact, this code has already been duplicated in the tun driver. Now that we need accounting in the tun driver, we can in fact use this function as is. So this patch marks it for export again. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Partially allow skb destructors to be used on receive pathHerbert Xu2009-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As it currently stands, skb destructors are forbidden on the receive path because the protocol end-points will overwrite any existing destructor with their own. This is the reason why we have to call skb_orphan in the loopback driver before we reinject the packet back into the stack, thus creating a period during which loopback traffic isn't charged to any socket. With virtualisation, we have a similar problem in that traffic is reinjected into the stack without being associated with any socket entity, thus providing no natural congestion push-back for those poor folks still stuck with UDP. Now had we been consistent in telling them that UDP simply has no congestion feedback, I could just fob them off. Unfortunately, we appear to have gone to some length in catering for this on the standard UDP path, with skb/socket accounting so that has created a very unhealthy dependency. Alas habits are difficult to break out of, so we may just have to allow skb destructors on the receive path. It turns out that making skb destructors useable on the receive path isn't as easy as it seems. For instance, simply adding skb_orphan to skb_set_owner_r isn't enough. This is because we assume all over the IP stack that skb->sk is an IP socket if present. The new transparent proxy code goes one step further and assumes that skb->sk is the receiving socket if present. Now all of this can be dealt with by adding simple checks such as only treating skb->sk as an IP socket if skb->sk->sk_family matches. However, it turns out that for bridging at least we don't need to do all of this work. This is of interest because most virtualisation setups use bridging so we don't actually go through the IP stack on the host (with the exception of our old nemesis the bridge netfilter, but that's easily taken care of). So this patch simply adds skb_orphan to the point just before we enter the IP stack, but after we've gone through the bridge on the receive path. It also adds an skb_orphan to the one place in netfilter that touches skb->sk/skb->destructor, that is, tproxy. One word of caution, because of the internal code structure, anyone wishing to deploy this must use skb_set_owner_w as opposed to skb_set_owner_r since many functions that create a new skb from an existing one will invoke skb_set_owner_w on the new skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2009-02-04
|\|
| * sunrpc: fix rdma dependenciesRandy Dunlap2009-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix sunrpc/rdma build dependencies. Survives 12 build combinations of INET, IPV6, SUNRPC, INFINIBAND, and INFINIBAND_ADDR_TRANS. ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_connect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_destroy_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_resolve_route" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_accept" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_listen" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_bind_addr" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2009-02-03
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * | mac80211: Cancel the dynamic ps timer in ioctl_siwpower.Vivek Natarajan2009-01-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | If the dynamic power save timer has been started before the power save is disabled using iwconfig, we fail to cancel the timer. Hence cancel it while disabling power save. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mac80211: don't try to powersave/config disabled interfacesJohannes Berg2009-01-29
| | | | | | | | | | | | | | | Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | cfg80211: do not pass -EALREADY to userspace on regdomain change requestLuis R. Rodriguez2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | If the regulatory domain is already set it is technically not an error so do not pass an errno to userspace. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mac80211: Generic TSF debuggingAlina Friedrichsen2009-01-29
| | | | | | | | | | | | | | | | | | | | | This patch enables low-level driver independent debugging of the TSF and remove the driver specific things of ath5k and ath9k from the debugfs. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mac80211: add interface list lockJohannes Berg2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using only the RTNL has a number of problems, most notably that ieee80211_iterate_active_interfaces() and other interface list traversals cannot be done from the internal workqueue because it needs to be flushed under the RTNL. This patch introduces a new mutex that protects the interface list against modifications. A more detailed explanation is part of the code change. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mac80211: flush workqueue a second time in suspend()Bob Copeland2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | Drivers can theoretically queue more work in one of their callbacks from mac80211 suspend, so let's flush it once more to be on the safe side, just before calling ->stop(). Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mac80211: change workqueue back to non-freezeableBob Copeland2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "mac80211: make workqueue freezable" made the mac80211 workqueue freezeable to prevent us from doing any work after the driver went away. This was fine before mac80211 had any suspend support. However, now we want to flush this workqueue in suspend(). Because the thread for a freezeable workqueue is stopped before the device class suspend() is called, flush_workqueue() will hang in the suspend-to-disk case. Converting it back to a non-freezeable queue will keep suspend from hanging. Moreover, since we flush the workqueue under RTNL and userspace is stopped, there won't be any new work in the workqueue until after resume. Thus we still don't have to worry about pinging the AP without hardware. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mac80211: Fixed BSSID handling revisitedAlina Friedrichsen2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch cleanup the fixed BSSID handling, that ieee80211_sta_set_bssid() works like ieee80211_sta_set_ssid(). So that the BSSID is only a second selection criterion besides the SSID. This allows us to create new IBSS networks with fixed BSSIDs, which was broken before. In the second version of this patch the handling of the stupid merges to the same BSSID is moved out to get reworked into an other patch. And this version hopefully solves the problems with some low-level drivers and re-adds the config BSSID warning to help debugging the low-level drivers. Much thanks to all who have helped testing! :) Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mac80211: Read the TSF via debugfsAlina Friedrichsen2009-01-29
| | | | | | | | | | | | | | | | | | | | | This patch adds an low-level driver independent entry to read the TSF value into the debugfs of mac80211. This makes debugging the IBSS handling of wifi drivers easier. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | cfg80211: allow users to help a driver's complianceLuis R. Rodriguez2009-01-29
| | | | | | | | | | | | | | | | | | | | | Let users be more compliant if so desired. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mac80211: allow mac80211 drivers to get to struct ieee80211_hw from wiphyLuis R. Rodriguez2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a driver is given a wiphy and it wants to get to its private mac80211 driver area it can use wiphy_to_ieee80211_hw() to get first to its ieee80211_hw and then access the private structure via hw->priv. The wiphy_priv() is already being used internally by mac80211 and drivers should not use this. This can be helpful in a drivers reg_notifier(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | cfg80211: Allow for strict regulatory settingsLuis R. Rodriguez2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows drivers to request strict regulatory settings to be applied to its devices. This is desirable for devices where proper calibration and compliance can only be gauranteed for for the device's programmed regulatory domain. Regulatory domain settings will be ignored until the device's own regulatory domain is properly configured. If no regulatory domain is received only the world regulatory domain will be applied -- if OLD_REG (default to "US") is not enabled. If OLD_REG behaviour is not acceptable to drivers they must update their wiphy with a custom reuglatory prior to wiphy registration. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | cfg80211: pass more detailed regulatory request information on reg_notifier()Luis R. Rodriguez2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drivers may need more information than just who set the last regulatory domain, as such lets just pass the last regulatory_request receipt. To do this we need to move out to headers struct regulatory_request, and enum environment_cap. While at it lets add documentation for enum environment_cap. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | cfg80211: move check for ignore_reg_update() on wiphy_update_regulatory()Luis R. Rodriguez2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This ensures that the initial REGDOM_SET_BY_CORE upon wiphy registration respects the wiphy->custom_regulatory setting. Without this and if OLD_REG is disabled (which will be default soon as we remove it) the wiphy->custom_regulatory is simply ignored. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | cfg80211: rename fw_handles_regulatory to custom_regulatoryLuis R. Rodriguez2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | Drivers without firmware can also have custom regulatory maps which do not map to a specific ISO / IEC alpha2 country code. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | cfg80211: ignore consecutive equal regulatory hintsLuis R. Rodriguez2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We ignore regulatory hints for the same alpha2 if we already have processed the same alpha2 on the current regulatory domain. For a driver regulatory_hint() this means we copy onto its wiphy->regd the previously procesed regulatory domain from CRDA without having to call CRDA again. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | cfg80211: process user requests only after previous user/driver/core requestsLuis R. Rodriguez2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | This prevents user regulatory changes to be considered prior to previous pending user, core or driver requests which have not be applied. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | cfg80211: export freq_reg_info()Luis R. Rodriguez2009-01-29
| | | | | | | | | | | | | | | | | | | | | This can be used by drivers on the reg_notifier() Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | cfg80211: add wiphy_apply_custom_regulatory()Luis R. Rodriguez2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds wiphy_apply_custom_regulatory() to be used by drivers prior to wiphy registration to apply a custom regulatory domain. This can be used by drivers that do not have a direct 1-1 mapping between a regulatory domain and a country. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | mac80211: Add capability to enable/disable beaconingJohannes Berg2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a flag to notify drivers to start and stop beaconing when needed, for example, during a scan run. Based on Sujith's first patch to do the same, but now disables beaconing for all virtual interfaces while scanning, has a separate change flag and tracks user-space requests. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | wireless: restrict to 32 legacy ratesJohannes Berg2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the standards only define 12 legacy rates, 32 is certainly a sane upper limit and we don't need to use u64 everywhere. Add sanity checking that no more than 32 rates are registered and change the variables to u32 throughout. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-27 05:01:34 -0500