aboutsummaryrefslogtreecommitdiffstats
path: root/net/mac80211/iface.c
Commit message (Collapse)AuthorAge
* mac80211: set carrier on for monitor interfaces on ieee80211_openDavid Gnedt2010-07-20
| | | | | | | | | | | | If a station interface is reused as monitor interface it is possible that the carrier is still set to off. This breaks packet injection on that monitor interface. Force the carrier on in monitor interface initialisation like it is also done for other interface types (e.g. adhoc, mesh point, ap). Signed-off-by: David Gnedt <david.gnedt@davizone.at> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix aggregation action frame handling with AP VLANsFelix Fietkau2010-07-20
| | | | | | | | | | | | | | When aggregation related action frames are enqueued for further work, and they originate from a STA that is part of an AP VLAN, they are currently enqueued for the AP interface. This breaks the sta_info_get() lookup in the actual work function, and because of that, aggregation sessions are not established for this STA. Fix this by replacing the sta_info_get call with a call to sta_info_get_bss. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Fix circular locking dependency in ARP filter handlingJuuso Oikarinen2010-06-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a circular locking dependency when configuring the hardware ARP filters on association, occurring when flushing the mac80211 workqueue. This is what happens: [ 92.026800] ======================================================= [ 92.030507] [ INFO: possible circular locking dependency detected ] [ 92.030507] 2.6.34-04781-g2b2c009 #85 [ 92.030507] ------------------------------------------------------- [ 92.030507] modprobe/5225 is trying to acquire lock: [ 92.030507] ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8105b5c0>] flush_workq ueue+0x0/0xb0 [ 92.030507] [ 92.030507] but task is already holding lock: [ 92.030507] (rtnl_mutex){+.+.+.}, at: [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [ 92.030507] which lock already depends on the new lock. [ 92.030507] [ 92.030507] [ 92.030507] the existing dependency chain (in reverse order) is: [ 92.030507] [ 92.030507] -> #2 (rtnl_mutex){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff81341754>] mutex_lock_nested+0x44/0x300 [ 92.030507] [<ffffffff812b9ce2>] rtnl_lock+0x12/0x20 [ 92.030507] [<ffffffffa022d47c>] ieee80211_assoc_done+0x6c/0xe0 [mac80211] [ 92.030507] [<ffffffffa022f2ad>] ieee80211_work_work+0x31d/0x1280 [mac80211] [ 92.030507] -> #1 ((&local->work_work)){+.+.+.}: [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105a51a>] worker_thread+0x22a/0x370 [ 92.030507] [<ffffffff8105ecc6>] kthread+0x96/0xb0 [ 92.030507] [<ffffffff81003a94>] kernel_thread_helper+0x4/0x10 [ 92.030507] [ 92.030507] -> #0 ((wiphy_name(local->hw.wiphy))){+.+.+.}: [ 92.030507] [<ffffffff81075fdc>] __lock_acquire+0x1c0c/0x1d50 [ 92.030507] [<ffffffff810761fb>] lock_acquire+0xdb/0x110 [ 92.030507] [<ffffffff8105b60e>] flush_workqueue+0x4e/0xb0 [ 92.030507] [<ffffffffa023ff7b>] ieee80211_stop_device+0x2b/0xb0 [mac80211] [ 92.030507] [<ffffffffa0231635>] ieee80211_stop+0x3e5/0x680 [mac80211] The locking in this case is quite complex. Fix the problem by rewriting the way the hardware ARP filter list is handled - i.e. make a copy of the address list to the bss_conf struct, and provide that list to the hardware driver when needed. The current patch will enable filtering also in promiscuous mode. This may need to be changed in the future. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: change RX aggregation lockingJohannes Berg2010-06-14
| | | | | | | | | | | | | To prepare for allowing drivers to sleep in ampdu_action, change the locking in the RX aggregation code to use a mutex, so that it would already allow drivers to sleep. But explicitly disable BHs around the callback for now since the TX part cannot yet sleep, and drivers' locking might require it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move aggregation callback processingJohannes Berg2010-06-14
| | | | | | | | | | | | | | | | | This moves the aggregation callback processing to the per-sdata skb queue and a work function rather than the tasklet. Unfortunately, this means that it extends the pkt_type hack to that skb queue. However, it will enable making ampdu_action API changes gradually, my current plan is to get rid of this again by forcing drivers to only return from ampdu_action() when everything is done, thus removing the callbacks completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: move blockack stop due to fragmentationJohannes Berg2010-06-14
| | | | | | | | | | | | | | | | | There's a corner case where we receive a fragmented frame during a blockack session, in which case we will terminate that session. To simplify future work in this area that will culminate in allowing the driver callbacks for aggregation to sleep, move the processing of this case out of the RX path into the interface work. This will simplify future work because the new place for this code doesn't require that the function will always be atomic, which the RX path needs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: always process blockack action from workqueueJohannes Berg2010-06-14
| | | | | | | | | | | To prepare for making the ampdu_action callback sleep, make mac80211 always process blockack action frames from the skb queue. This gets rid of the current special case for managed mode interfaces as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: common work skb freeingJohannes Berg2010-06-14
| | | | | | | | | All the management processing functions free the skb after they are done, so this can be done in the new common code instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use common work functionJohannes Berg2010-06-14
| | | | | | | | | | | | | Even with the previous patch, IBSS, managed and mesh modes all attach their own work function to the shared work struct, which means some duplicated code. Change that to only have a frame processing function and a further work function for each of them and share some common code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use common work structJohannes Berg2010-06-14
| | | | | | | | | | | | | IBSS, managed and mesh modes all have their own work struct, and in the future we want to also use it in other modes to process frames from the now common skb queue. This also makes the skb queue and work safe to use from other interface types. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: use common skb queueJohannes Berg2010-06-14
| | | | | | | | | | IBSS, managed and mesh modes all have an skb queue, and in the future we want to also use it in other modes, so make them all use a common skb queue already. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: simplify station/aggregation codeJohannes Berg2010-06-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A number of places use RCU locking for accessing the station list, even though they do not need to. Use mutex locking instead to prepare for the locking changes I want to make. The mlme code is also using a WLAN_STA_DISASSOC flag that has the same meaning as WLAN_STA_BLOCK_BA, so use that. While doing so, combine places where we loop over stations twice, and optimise away some of the loops by checking if the hardware supports aggregation at all first. Also fix a more theoretical race condition: right now we could resume, set up an aggregation session, and right after tear it down again due to the code that is needed for hardware reconfiguration here. Also mark add a comment to that code marking it as a workaround. Finally, remove a pointless aggregation disabling loop when an interface is stopped, directly after that we remove all stations from it which will also disable all aggregation sessions that may still be active, and does so in a race-free way unlike the current loop that doesn't block new sessions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: simplify key lockingJohannes Berg2010-06-03
| | | | | | | | | | | | | Since I recently made station management able to sleep, I can now rework key management as well; since it will no longer need a spinlock and can also use a mutex instead, a bunch of code to allow drivers' set_key to sleep while key management is protected by a spinlock can now be removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove useless work startingJohannes Berg2010-06-03
| | | | | | | | | | Ever since we use only cfg80211 for configuration, there is no configuration that could be pending at this point, cfg80211 will have the configuration that is pending and apply it afterwards. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵David S. Miller2010-04-11
|\ | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
| * include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* | net: convert multicast list to list_headJiri Pirko2010-04-03
| | | | | | | | | | | | | | | | | | | | | | | | | | Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mac80211: Add support for connection monitor in hardwareJuuso Oikarinen2010-03-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is based on a RFC patch by Kalle Valo. The wl1271 has a feature which handles the connection monitor logic in hardware, basically sending periodically nullfunc frames and reporting to the host if AP is lost, after attempting to recover by sending probe-requests to the AP. Add support to mac80211 by adding a new flag IEEE80211_HW_CONNECTION_MONITOR which prevents conn_mon_timer from triggering during idle periods, and prevents sending probe-requests to the AP if beacon-loss is indicated by the hardware. Cc: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: use different MAC addresses for virtual interfacesJohannes Berg2010-03-09
|/ | | | | | | | | | | | | | | Drivers can now advertise to cfg80211 that they have multiple MAC addresses reserved for a device, but we don't currently make use of that in mac80211. Change that and assign different addresses to new virtual interfaces (if addresses are available) in order to make it easier for users to use multiple virtual interfaces; they no longer need to always assign a new MAC address manually. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix netdev renameJohannes Berg2010-02-15
| | | | | | | | | | | | | | | | | | | Fix a copy bug introduced by commit 47846c9b0c10808d9337d2e7d09361f3e0a0a71a Author: Johannes Berg <johannes@sipsolutions.net> Date: Wed Nov 25 17:46:19 2009 +0100 mac80211: reduce reliance on netdev This manifested itself only in debug messages and in the debugfs rename failure that would always happen due to trying to rename the dir over itself. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix WMM AC default for non-QoS data framesFelix Fietkau2010-01-19
| | | | | | | | | | The WMM AC selection added to the monitor mode selection function accidentally assigns non-QoS data frames to the same AC as mgmt frames (VO). This is not serious, but should be fixed anyway. This patch assigns them to the BE AC instead. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville2010-01-19
|\
| * mac80211: fix queue selection for data frames on monitor interfacesFelix Fietkau2010-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When ieee80211_monitor_select_queue encounters data frames, it selects the WMM AC based on skb->priority and assumes that skb->priority contains a valid 802.1d tag. However this assumption is incorrect, since ieee80211_select_queue has not been called at this point. If skb->priority > 7, an array overrun occurs, which could lead to invalid values, resulting in crashes in the tx path. Fix this by setting skb->priority based on the 802.11 header for QoS frames and using the default AC for all non-QoS frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix endian errorJohannes Berg2010-01-08
| | | | | | | | | | | | | | | | | | I forgot to convert the radiotap length to CPU endian, which sparse found thankfully. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix queue selection for packets injected via monitor interfaceLennert Buytenhek2010-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 'mac80211: fix skb buffering issue' added an ->ndo_select_queue() for monitor interfaces which can end up dereferencing ieee802_1d_to_ac[] beyond the end of the array for injected data packets (as skb->priority isn't guaranteed to be zero or within [0:7]), which then triggers the WARN_ON in net/core/dev.c:dev_cap_txqueue(). Fix this by always setting the priority to zero on injected data frames. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | cfg80211/mac80211: Use more generic bitrate mask for rate controlJouni Malinen2010-01-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend struct cfg80211_bitrate_mask to actually use a bitfield mask instead of just a single fixed or maximum rate index. This change itself does not modify the behavior (except for debugfs files), but it prepares cfg80211 and mac80211 for a new nl80211 command for setting which rates can be used in TX rate control. Since frames are now going through the rate control algorithm unconditionally, the internal IEEE80211_TX_INTFL_RCALGO flag can now be removed. The RC implementations can use the rate_idx_mask value to optimize their behavior if only a single rate is enabled. The old max_rate_idx in struct ieee80211_tx_rate_control is maintained (but commented as deprecated) for backwards compatibility with existing RC implementations. Once these implementations have been updated to use the more generic rate_idx_mask, the max_rate_idx value can be removed. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville2010-01-06
|\| | | | | | | | | | | Conflicts: net/mac80211/scan.c net/mac80211/wme.c
| * Revert "mac80211: replace netif_tx_{start,stop,wake}_all_queues"John W. Linville2010-01-06
| | | | | | | | | | | | | | | | | | This reverts commit 53623f1a09c7a7d23b74f0f7d93dba0ebde1006b. This was inadvertantly missed in "mac80211: fix skb buffering issue", and is required with that patch to restore proper queue operation. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville2010-01-05
|\| | | | | | | | | Conflicts: net/mac80211/iface.c
| * mac80211: fix skb buffering issueJohannes Berg2010-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since I removed the master netdev, we've been keeping internal queues only, and even before that we never told the networking stack above the virtual interfaces about congestion. This means that packets are queued in mac80211 and the upper layers never know, possibly leading to memory exhaustion and other problems. This patch makes all interfaces multiqueue and uses ndo_select_queue to put the packets into queues per AC. Additionally, when the driver stops a queue, we now stop all corresponding queues for the virtual interfaces as well. The injection case will use VO by default for non-data frames, and BE for data frames, but downgrade any data frames according to ACM. It needs to be fleshed out in the future to allow chosing the queue/AC in radiotap. Reported-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org [2.6.32] Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: fix ieee80211_change_mac() to use struct sockaddrKalle Valo2010-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting the mac address from user space was buggy. For example, when executing this command: ip link set wlan0 address 00:1f:df:88:cd:55 mac80211 used the address 01:00:00:1f:df:88 instead. It was shifted two bytes. The reason was that the addr (type of void *) provided to ieee80211_change_mac() is actually of type struct sockaddr, not just the mac address array. Also the call to eth_mac_addr() expects the address to be struct sockaddr. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: remove struct ieee80211_if_init_confJohannes Berg2009-12-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All its members (vif, mac_addr, type) are now available in the vif struct directly, so we can pass that instead of the conf struct. I generated this patch (except the mac80211 and header file changes) with this semantic patch: @@ identifier conf, fn, hw; type tp; @@ tp fn(struct ieee80211_hw *hw, -struct ieee80211_if_init_conf *conf) +struct ieee80211_vif *vif) { <... ( -conf->type +vif->type | -conf->mac_addr +vif->addr | -conf->vif +vif ) ...> } Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: generalise work handlingJohannes Berg2009-12-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to use auth/assoc for different purposes other than MLME, it needs to be split up. For other purposes, a generic work handling (potentially on another channel) will be useful. To achieve that, this patch moves much of the MLME work handling out of mlme into a new work API. The API can currently handle probing a specific AP, authentication and association. The MLME previously handled probe/authentication as one step and will continue to do so, but they are separate in the new work handling. Work items are RCU-managed to be able to check for existence of an item for a specific frame in the RX path, but they can be re-used which the MLME right now will do for its combined probe/auth step. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: introduce flush operationJohannes Berg2009-12-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We've long lacked a good confirmation that frames have really gone out, e.g. before going off-channel for a scan. Add a flush() operation that drivers can implement to provide that confirmation, and use it in a few places: * before scanning sends the nullfunc frames * after scanning sends the nullfunc frames, if any * when going idle, to send any pending frames Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: add ieee80211_sdata_runningJohannes Berg2009-12-28
| | | | | | | | | | | | | | | | | | Instead of always using netif_running(sdata->dev) use ieee80211_sdata_running(sdata) now which is just an inline containing netif_running() for now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mac80211: reduce reliance on netdevJohannes Berg2009-12-21
|/ | | | | | | | | | | | | | | | | | | For bluetooth 3, we will most likely not have a netdev for a virtual interface (sdata), so prepare for that by reducing the reliance on having a netdev. This patch moves the name and address fields into the sdata struct and uses them from there all over. Some work is needed to keep them sync'ed, but that's not a lot of work and in slow paths anyway. In doing so, this also reduces the number of pointer dereferences in many places, because of things like sdata->dev->dev_addr becoming sdata->vif.addr. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Speedup ieee80211_remove_interfaces()Eric Dumazet2009-11-25
| | | | | | | | Speedup ieee80211_remove_interfaces() by factorizing synchronize_rcu() calls Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: introduce capability for 4addr modeJohannes Berg2009-11-19
| | | | | | | | | | | | | | | | It's very likely that not many devices will support four-address mode in station or AP mode so introduce capability bits for both modes, set them in mac80211 and check them when userspace tries to use the mode. Also, keep track of 4addr in cfg80211 (wireless_dev) and not in mac80211 any more. mac80211 can also be improved for the VLAN case by not looking at the 4addr flag but maintaining the station pointer for it correctly. However, keep track of use_4addr for station mode in mac80211 to avoid all the derefs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: implement support for 4-address frames for AP and client modeFelix Fietkau2009-11-11
| | | | | | | | | | | | | | | | | | | | | | In some situations it might be useful to run a network with an Access Point and multiple clients, but with each client bridged to a network behind it. For this to work, both the client and the AP need to transmit 4-address frames, containing both source and destination MAC addresses. With this patch, you can configure a client to communicate using only 4-address frames for data traffic. On the AP side you can enable 4-address frames for individual clients by isolating them in separate AP VLANs which are configured in 4-address mode. Such an AP VLAN will be limited to one client only, and this client will be used as the destination for all traffic on its interface, regardless of the destination MAC address in the packet headers. The advantage of this mode compared to regular WDS mode is that it's easier to configure and does not require a static list of peer MAC addresses on any side. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove RX_FLAG_RADIOTAPJohannes Berg2009-10-30
| | | | | | | | | | | | | | | | | | | | | | | While there may be a case for a driver adding its own bits of radiotap information, none currently does. Also, drivers would have to copy the code to generate the radiotap bits that now mac80211 generates. If some driver in the future needs to add some driver-specific information I'd expect that to be in a radiotap vendor namespace and we can add a different way of passing such data up and having mac80211 include it. Additionally, rename IEEE80211_CONF_RADIOTAP to IEEE80211_CONF_MONITOR since it's still used by b43(legacy) to obtain per-frame timestamps. The purpose of this patch is to simplify the RX code in mac80211 to make it easier to add paged skb support. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: replace netif_tx_{start,stop,wake}_all_queuesJohn W. Linville2009-10-27
| | | | | | | | Replace netif_tx_{start,stop,wake}_all_queues with the single-queue equivalents (i.e. netif_{start,stop,wake}_queue). Since we are down to a single queue, these should peform slightly better. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: support ETHTOOL_GPERMADDRJohn W. Linville2009-10-07
| | | | Signed-off-by: John W. Linville <linville@tuxdriver.com>
* cfg80211: assign device type in netdev notifier callbackMarcel Holtmann2009-10-05
| | | | | | | | | Instead of having to modify every non-mac80211 for device type assignment, do this inside the netdev notifier callback of cfg80211. So all drivers that integrate with cfg80211 will export a proper device type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add DEVTYPE support for Ethernet based devicesMarcel Holtmann2009-09-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Ethernet framing is used for a lot of devices these days. Most prominent are WiFi and WiMAX based devices. However for userspace application it is important to classify these devices correctly and not only see them as Ethernet devices. The daemons like HAL, DeviceKit or even NetworkManager with udev support tries to do the classification in userspace with a lot trickery and extra system calls. This is not good and actually reaches its limitations. Especially since the kernel does know the type of the Ethernet device it is pretty stupid. To solve this problem the underlying device type needs to be set and then the value will be exported as DEVTYPE via uevents and available within udev. # cat /sys/class/net/wlan0/uevent DEVTYPE=wlan INTERFACE=wlan0 IFINDEX=5 This is similar to subsystems like USB and SCSI that distinguish between hosts, devices, disks, partitions etc. The new SET_NETDEV_DEVTYPE() is a convenience helper to set the actual device type. All device types are free form, but for convenience the same strings as used with RFKILL are choosen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* mac80211: fix scan cancel on ifdownJohannes Berg2009-08-28
| | | | | | | | | | | | | When an interface is taken down while a scan is pending -- i.e. a scan request was accepted but not yet acted upon due to other work being in progress -- we currently do not properly cancel that scan and end up getting stuck. Fix this by doing better checks when an interface is taken down. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: remove tasklet enable/disableJohannes Berg2009-08-28
| | | | | | | | | | | | | | | | | | | | | | Due to the way the tasklets work in mac80211 there's no need to ever disable them. However, we need to clear the pending packets when taking down the last interface because otherwise the tx_pending_tasklet might be queued if the driver mucks with the queues (which it shouldn't). I've had a situation occasionally with ar9170 in which ksoftirq was using 100% CPU time because a disabled tasklet was scheduled, and I think that was due to ar9170 receiving a packet while the tasklet was disabled. That's strange and it really should not do that for other reasons, but there's no need to waste that much CPU time over it, it should just warn instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: fix configure_filter invocation after stopJohannes Berg2009-08-28
| | | | | | | | | | | | | | | | | | | Since configure_filter can sleep now, any multicast configuration needed to be postponed to a work struct. This, however, lead to a problem that we could queue the work, stop the device and then afterwards invoke configure_filter which may lead to driver hangs and is a bug. To fix this, we can just cancel the filter work since it's unnecessary to do after stopping the hw. Since there are various places that call drv_stop, and two of them do very similar things, the code for them can be put into a shared function at the same time. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Tested-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: allow configure_filter callback to sleepJohannes Berg2009-08-20
| | | | | | | | | | | | | | | | | | | | | Over time, a whole bunch of drivers have come up with their own scheme to delay the configure_filter operation to a workqueue. To be able to simplify things, allow configure_filter to sleep, and add a new prepare_multicast callback that drivers that need the multicast address list implement. This new callback must be atomic, but most drivers either don't care or just calculate a hash which can be done atomically and then uploaded to the hardware non-atomically. A cursory look suggests that at76c50x-usb, ar9170, mwl8k (which is actually very broken now), rt2x00, wl1251, wl1271 and zd1211 should make use of this new capability. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: FIF_PSPOLL filter flagIgor Perminov2009-08-04
| | | | | | | | | | | | | | | | | | | | | | When an interface is configured in the AP mode, the mac80211 implementation doesn't inform the driver to receive PS Poll frames. It leads to inability to communicate with power-saving stations reliably. The FIF_CONTROL flag isn't passed by mac80211 to ieee80211_ops.configure_filter when an interface is in the AP mode. And it's ok, because we don't want to receive ACK frames and other control ones, but only PS Poll ones. This patch introduces the FIF_PSPOLL filter flag in addition to FIF_CONTROL, which means for the driver "pass PS Poll frames". This flag is passed to the driver: A) When an interface is configured in the AP mode. B) In all cases, when the FIF_CONTROL flag was passed earlier (in addition to it). Signed-off-by: Igor Perminov <igor.perminov@inbox.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: redefine usage of the mac80211 workqueueLuis R. Rodriguez2009-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mac80211 workqueue exists to enable mac80211 and drivers to queue their own work on a single threaded workqueue. mac80211 takes care to flush the workqueue during suspend but we never really had requirements on drivers for how they should use the workqueue in consideration for suspend. We extend mac80211 to document how the mac80211 workqueue should be used, how it should not be used and finally move raw access to the workqueue to mac80211 only. Drivers and mac80211 use helpers to queue work onto the mac80211 workqueue: * ieee80211_queue_work() * ieee80211_queue_delayed_work() These helpers will now warn if mac80211 already completed its suspend cycle and someone is trying to queue work. mac80211 flushes the mac80211 workqueue prior to suspend a few times, but we haven't taken the care to ensure drivers won't add more work after suspend. To help with this we add a warning when someone tries to add work and mac80211 already completed the suspend cycle. Drivers should ensure they cancel any work or delayed work in the mac80211 stop() callback. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-08 06:47:43 -0500