aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv6
Commit message (Collapse)AuthorAge
* [IPv6]: Fix ICMPv6 redirect handling with target multicast addressBrian Haley2007-10-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the ICMPv6 Target address is multicast, Linux processes the redirect instead of dropping it. The problem is in this code in ndisc_redirect_rcv(): if (ipv6_addr_equal(dest, target)) { on_link = 1; } else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) { ND_PRINTK2(KERN_WARNING "ICMPv6 Redirect: target address is not link-local.\n"); return; } This second check will succeed if the Target address is, for example, FF02::1 because it has link-local scope. Instead, it should be checking if it's a unicast link-local address, as stated in RFC 2461/4861 Section 8.1: - The ICMP Target Address is either a link-local address (when redirected to a router) or the same as the ICMP Destination Address (when redirected to the on-link destination). I know this doesn't explicitly say unicast link-local address, but it's implied. This bug is preventing Linux kernels from achieving IPv6 Logo Phase II certification because of a recent error that was found in the TAHI test suite - Neighbor Disovery suite test 206 (v6LC.2.3.6_G) had the multicast address in the Destination field instead of Target field, so we were passing the test. This won't be the case anymore. The patch below fixes this problem, and also fixes ndisc_send_redirect() to not send an invalid redirect with a multicast address in the Target field. I re-ran the TAHI Neighbor Discovery section to make sure Linux passes all 245 tests now. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TCP]: Fix MD5 signature handling on big-endian.David S. Miller2007-09-28
| | | | | | | | | | | | | | | | | | | Based upon a report and initial patch by Peter Lieven. tcp4_md5sig_key and tcp6_md5sig_key need to start with the exact same members as tcp_md5sig_key. Because they are both cast to that type by tcp_v{4,6}_md5_do_lookup(). Unfortunately tcp{4,6}_md5sig_key use a u16 for the key length instead of a u8, which is what tcp_md5sig_key uses. This just so happens to work by accident on little-endian, but on big-endian it doesn't. Instead of casting, just place tcp_md5sig_key as the first member of the address-family specific structures, adjust the access sites, and kill off the ugly casts. Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Fix source address selection.Jiri Kosina2007-09-16
| | | | | | | | | | | | The commit 95c385 broke proper source address selection for cases in which there is a address which is makred 'deprecated'. The commit mistakenly changed ifa->flags to ifa_result->flags (probably copy/paste error from a few lines above) in the 'Rule 3' address selection code. The patch restores the previous RFC-compliant behavior. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Just increment OutDatagrams once per a datagram.YOSHIFUJI Hideaki2007-09-14
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Fix unbalanced socket reference with MSG_CONFIRM.YOSHIFUJI Hideaki2007-09-14
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPv6]: Fix NULL pointer dereference in ip6_flush_pending_framesYOSHIFUJI Hideaki2007-09-11
| | | | | | | | | | | | | | | | | | | | | | | Some of skbs in sk->write_queue do not have skb->dst because we do not fill skb->dst when we allocate new skb in append_data(). BTW, I think we may not need to (or we should not) increment some stats when using corking; if 100 sendmsg() (with MSG_MORE) result in 2 packets, how many should we increment? If 100, we should set skb->dst for every queued skbs. If 1 (or 2 (*)), we increment the stats for the first queued skb and we should just skip incrementing OutDiscards for the rest of queued skbs, adn we should also impelement this semantics in other places; e.g., we should increment other stats just once, not 100 times. *: depends on the place we are discarding the datagram. I guess should just increment by 1 (or 2). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: Fix/improve deadlock condition on module removal netfilterNeil Horman2007-09-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So I've had a deadlock reported to me. I've found that the sequence of events goes like this: 1) process A (modprobe) runs to remove ip_tables.ko 2) process B (iptables-restore) runs and calls setsockopt on a netfilter socket, increasing the ip_tables socket_ops use count 3) process A acquires a file lock on the file ip_tables.ko, calls remove_module in the kernel, which in turn executes the ip_tables module cleanup routine, which calls nf_unregister_sockopt 4) nf_unregister_sockopt, seeing that the use count is non-zero, puts the calling process into uninterruptible sleep, expecting the process using the socket option code to wake it up when it exits the kernel 4) the user of the socket option code (process B) in do_ipt_get_ctl, calls ipt_find_table_lock, which in this case calls request_module to load ip_tables_nat.ko 5) request_module forks a copy of modprobe (process C) to load the module and blocks until modprobe exits. 6) Process C. forked by request_module process the dependencies of ip_tables_nat.ko, of which ip_tables.ko is one. 7) Process C attempts to lock the request module and all its dependencies, it blocks when it attempts to lock ip_tables.ko (which was previously locked in step 3) Theres not really any great permanent solution to this that I can see, but I've developed a two part solution that corrects the problem Part 1) Modifies the nf_sockopt registration code so that, instead of using a use counter internal to the nf_sockopt_ops structure, we instead use a pointer to the registering modules owner to do module reference counting when nf_sockopt calls a modules set/get routine. This prevents the deadlock by preventing set 4 from happening. Part 2) Enhances the modprobe utilty so that by default it preforms non-blocking remove operations (the same way rmmod does), and add an option to explicity request blocking operation. So if you select blocking operation in modprobe you can still cause the above deadlock, but only if you explicity try (and since root can do any old stupid thing it would like.... :) ). Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Freeing alive inet6 addressDenis V. Lunev2007-09-11
| | | | | | | | | | | | From: Denis V. Lunev <den@openvz.org> addrconf_dad_failure calls addrconf_dad_stop which takes referenced address and drops the count. So, in6_ifa_put perrformed at out: is extra. This results in message: "Freeing alive inet6 address" and not released dst entries. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Fix IP_ADD/DROP_MEMBERSHIP to handle only connectionlessFlavio Leitner2007-08-26
| | | | | | | | Fix IP[V6]_ADD_MEMBERSHIP and IP[V6]_DROP_MEMBERSHIP to return -EPROTO for connection oriented sockets. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Fix kernel panic while send SCTP data with IP fragmentsWei Yongjun2007-08-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If ICMP6 message with "Packet Too Big" is received after send SCTP DATA, kernel panic will occur when SCTP DATA is send again. This is because of a bad dest address when call to skb_copy_bits(). The messages sequence is like this: Endpoint A Endpoint B <------- SCTP DATA (size=1432) ICMP6 message -------> (Packet Too Big pmtu=1280) <------- Resend SCTP DATA (size=1432) ------------kernel panic--------------- printing eip: c05be62a *pde = 00000000 Oops: 0002 [#1] SMP Modules linked in: scomm l2cap bluetooth ipv6 dm_mirror dm_mod video output sbs battery lp floppy sg i2c_piix4 i2c_core pcnet32 mii button ac parport_pc parport ide_cd cdrom serio_raw mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd CPU: 0 EIP: 0060:[<c05be62a>] Not tainted VLI EFLAGS: 00010282 (2.6.23-rc2 #1) EIP is at skb_copy_bits+0x4f/0x1ef eax: 000004d0 ebx: ce12a980 ecx: 00000134 edx: cfd5a880 esi: c8246858 edi: 00000000 ebp: c0759b14 esp: c0759adc ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process swapper (pid: 0, ti=c0759000 task=c06d0340 task.ti=c0713000) Stack: c0759b88 c0405867 ce12a980 c8bff838 c789c084 00000000 00000028 cfd5a880 d09f1890 000005dc 0000007b ce12a980 cfd5a880 c8bff838 c0759b88 d09bc521 000004d0 fffff96c 00000200 00000100 c0759b50 cfd5a880 00000246 c0759bd4 Call Trace: [<c0405e1d>] show_trace_log_lvl+0x1a/0x2f [<c0405ecd>] show_stack_log_lvl+0x9b/0xa3 [<c040608d>] show_registers+0x1b8/0x289 [<c0406271>] die+0x113/0x246 [<c0625dbc>] do_page_fault+0x4ad/0x57e [<c0624642>] error_code+0x72/0x78 [<d09bc521>] ip6_output+0x8e5/0xab2 [ipv6] [<d09bcec1>] ip6_xmit+0x2ea/0x3a3 [ipv6] [<d0a3f2ca>] sctp_v6_xmit+0x248/0x253 [sctp] [<d0a3c934>] sctp_packet_transmit+0x53f/0x5ae [sctp] [<d0a34bf8>] sctp_outq_flush+0x555/0x587 [sctp] [<d0a34d3c>] sctp_retransmit+0xf8/0x10f [sctp] [<d0a3d183>] sctp_icmp_frag_needed+0x57/0x5b [sctp] [<d0a3ece2>] sctp_v6_err+0xcd/0x148 [sctp] [<d09cf1ce>] icmpv6_notify+0xe6/0x167 [ipv6] [<d09d009a>] icmpv6_rcv+0x7d7/0x849 [ipv6] [<d09be240>] ip6_input+0x1dc/0x310 [ipv6] [<d09be965>] ipv6_rcv+0x294/0x2df [ipv6] [<c05c3789>] netif_receive_skb+0x2d2/0x335 [<c05c5733>] process_backlog+0x7f/0xd0 [<c05c58f6>] net_rx_action+0x96/0x17e [<c042e722>] __do_softirq+0x64/0xcd [<c0406f37>] do_softirq+0x5c/0xac ======================= Code: 00 00 29 ca 89 d0 2b 45 e0 89 55 ec 85 c0 7e 35 39 45 08 8b 55 e4 0f 4e 45 08 8b 75 e0 8b 7d dc 89 c1 c1 e9 02 03 b2 a0 00 00 00 <f3> a5 89 c1 83 e1 03 74 02 f3 a4 29 45 08 0f 84 7b 01 00 00 01 EIP: [<c05be62a>] skb_copy_bits+0x4f/0x1ef SS:ESP 0068:c0759adc Kernel panic - not syncing: Fatal exception in interrupt Arnaldo says: ==================== Thanks! I'm to blame for this one, problem was introduced in: b0e380b1d8a8e0aca215df97702f99815f05c094 @@ -761,7 +762,7 @@ slow_path: /* * Copy a block of the IP datagram. */ - if (skb_copy_bits(skb, ptr, frag->h.raw, len)) + if (skb_copy_bits(skb, ptr, skb_transport_header(skb), len)) BUG(); left -= len; ==================== Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPv6]: Invalid semicolon after if statementIlpo Järvinen2007-08-15
| | | | | | | | | | A similar fix to netfilter from Eric Dumazet inspired me to look around a bit by using some grep/sed stuff as looking for this kind of bugs seemed easy to automate. This is one of them I found where it looks like this semicolon is not valid. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Clean up duplicate includes in net/ipv6/Jesper Juhl2007-08-14
| | | | | | | | | This patch cleans up duplicate includes in net/ipv6/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TCP]: Invoke tcp_sendmsg() directly, do not use inet_sendmsg().David S. Miller2007-08-02
| | | | | | | | | | | | | | | As discovered by Evegniy Polyakov, if we try to sendmsg after a connection reset, we can do incredibly stupid things. The core issue is that inet_sendmsg() tries to autobind the socket, but we should never do that for TCP. Instead we should just go straight into TCP's sendmsg() code which will do all of the necessary state and pending socket error checks. TCP's sendpage already directly vectors to tcp_sendpage(), so this merely brings sendmsg() in line with that. Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: Make nf_ct_ipv6_skip_exthdr() static.Adrian Bunk2007-07-31
| | | | | | | nf_ct_ipv6_skip_exthdr() can now become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: ipv6_addr_type() doesn't know about RFC4193 addresses.Dave Johnson2007-07-31
| | | | | | | | | | | | | | | | ipv6_addr_type() doesn't check for 'Unique Local IPv6 Unicast Addresses' (RFC4193) and returns IPV6_ADDR_RESERVED for that range. SCTP uses this function and will fail bind() and connect() calls that use RFC4193 addresses, SCTP will also ignore inbound connections from RFC4193 addresses if listening on IPV6_ADDR_ANY. There may be other users of ipv6_addr_type() that could also have problems. Signed-off-by: Dave Johnson <djohnson@sw.starentnetworks.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV4/IPV6]: Fail registration if inet device construction failsHerbert Xu2007-07-31
| | | | | | | | | | Now that netdev notifications can fail, we can use this to signal errors during registration for IPv4/IPv6. In particular, if we fail to allocate memory for the inet device, we can fail the netdev registration. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Don't update ADVMSS on routes where the MTU is not also updatedSimon Arlott2007-07-31
| | | | | | | | | The ADVMSS value was incorrectly updated for ALL routes when the MTU is updated because it's outside the effect of the if statement's condition. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tunnel - endianness annotationsAl Viro2007-07-26
| | | | | | | | | | | | | | | | Convert rel_info to host-endian before calling ip6_tnl_err(). The things become much more straightforward that way. The key observation (and the reason why that code actually worked) is that after ip6_tnl_err() we either immediately bailed out or had rel_info set to 0 or had it set to host-endian and guaranteed to hit (rel_type == ICMP_DEST_UNREACH && rel_code == ICMP_FRAG_NEEDED) case. So inconsistent endianness didn't really lead to bugs, but it had been subtle and prone to breakage. New variant is saner and obviously safe. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [NETFILTER]: Fix logging regressionPatrick McHardy2007-07-24
| | | | | | | | | | | Loading one of the LOG target fails if a different target has already registered itself as backend for the same family. This can affect the ipt_LOG and ipt_ULOG modules when both are loaded. Reported and tested by: <t.artem@mailcity.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TCPv6] MD5SIG: Ensure to reset allocation count to avoid panic.YOSHIFUJI Hideaki2007-07-24
| | | | | | | | | | | After clearing all passwords for IPv6 peers, we need to set allocation count to zero as well as we free the storage. Otherwise, we panic when a user trys to (re)add a password. Discovered and fixed by MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: endianness bug in ip6_tunnelAl Viro2007-07-21
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* mm: Remove slab destructors from kmem_cache_create().Paul Mundt2007-07-19
| | | | | | | | | | | | | | Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* [IPV6]: Call inet6addr_chain notifiers on link downVlad Yasevich2007-07-15
| | | | | | | | | | Currently if the link is brought down via ip link or ifconfig down, the inet6addr_chain notifiers are not called even though all the addresses are removed from the interface. This caused SCTP to add duplicate addresses to it's list. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: MSG_ERRQUEUE messages do not pass to connected raw socketsDmitry Butskoy2007-07-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Dmitry Butskoy <dmitry@butskoy.name> Taken from http://bugzilla.kernel.org/show_bug.cgi?id=8747 Problem Description: It is related to the possibility to obtain MSG_ERRQUEUE messages from the udp and raw sockets, both connected and unconnected. There is a little typo in net/ipv6/icmp.c code, which prevents such messages to be delivered to the errqueue of the correspond raw socket, when the socket is CONNECTED. The typo is due to swap of local/remote addresses. Consider __raw_v6_lookup() function from net/ipv6/raw.c. When a raw socket is looked up usual way, it is something like: sk = __raw_v6_lookup(sk, nexthdr, daddr, saddr, IP6CB(skb)->iif); where "daddr" is a destination address of the incoming packet (IOW our local address), "saddr" is a source address of the incoming packet (the remote end). But when the raw socket is looked up for some icmp error report, in net/ipv6/icmp.c:icmpv6_notify() , daddr/saddr are obtained from the echoed fragment of the "bad" packet, i.e. "daddr" is the original destination address of that packet, "saddr" is our local address. Hence, for icmpv6_notify() must use "saddr, daddr" in its arguments, not "daddr, saddr" ... Steps to reproduce: Create some raw socket, connect it to an address, and cause some error situation: f.e. set ttl=1 where the remote address is more than 1 hop to reach. Set IPV6_RECVERR . Then send something and wait for the error (f.e. poll() with POLLERR|POLLIN). You should receive "time exceeded" icmp message (because of "ttl=1"), but the socket do not receive it. If you do not connect your raw socket, you will receive MSG_ERRQUEUE successfully. (The reason is that for unconnected socket there are no actual checks for local/remote addresses). Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: nf_conntrack: mark protocols __read_mostlyPatrick McHardy2007-07-14
| | | | | | | | Also remove two unnecessary EXPORT_SYMBOLs and move the nf_conntrack_l3proto_ipv4 declaration to the correct file. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: Lower *tables printk severityPatrick McHardy2007-07-14
| | | | | | | | Lower ip6tables, arptables and ebtables printk severity similar to Dan Aloni's patch for iptables. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: nf_conntrack: Introduces nf_ct_get_tuplepr and uses itYasuyuki Kozakai2007-07-14
| | | | | | | | | | nf_ct_get_tuple() requires the offset to transport header and that bothers callers such as icmp[v6] l4proto modules. This introduces new function to simplify them. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: nf_conntrack: make l3proto->prepare() generic and renames itYasuyuki Kozakai2007-07-14
| | | | | | | | | | | | The icmp[v6] l4proto modules parse headers in ICMP[v6] error to get tuple. But they have to find the offset to transport protocol header before that. Their processings are almost same as prepare() of l3proto modules. This makes prepare() more generic to simplify icmp[v6] l4proto module later. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: nf_conntrack: Increment error count on parsing IPv4 headerYasuyuki Kozakai2007-07-14
| | | | | | Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Make all initialized struct seq_operations const.Philippe De Muyter2007-07-11
| | | | | | | Make all initialized struct seq_operations in net/ const Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Remove unneeded pointer idev from addrconf_cleanup().Micah Gruber2007-07-11
| | | | | | | | | This trivial patch removes the unneeded pointer idev returned from __in6_dev_get(), which is never used. The check for NULL can be simply done by if (__in6_dev_get(dev) == NULL). Signed-off-by: Micah Gruber <micah.gruber@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Make IPV6_{RECV,2292}RTHDR boolean options.YOSHIFUJI Hideaki2007-07-11
| | | | | | | | | Because reversing RH0 is no longer supported by deprecation of RH0, let's make IPV6_{RECV,2292}RTHDR boolean options. Boolean are more appropriate from standard POV. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Do not send RH0 anymore.YOSHIFUJI Hideaki2007-07-11
| | | | | | | Based on <draft-ietf-ipv6-deprecate-rh0-00.txt>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Restore semantics of Routing Header processing.YOSHIFUJI Hideaki2007-07-11
| | | | | | | | | | | | | The "fix" for emerging security threat was overkill and it broke basic semantic of IPv6 routing header processing. We should assume RT0 (or even RT2, depends on configuration) as "unknown" RH type so that we - silently ignore the routing header if segleft == 0 - send ICMPv6 Parameter Problem message back to the sender, otherwise. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Avoid copying writable clones in tunnel driversPatrick McHardy2007-07-11
| | | | | Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: Convert DEBUGP to pr_debugPatrick McHardy2007-07-11
| | | | | | | Convert DEBUGP to pr_debug and fix lots of non-compiling debug statements. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: nf_conntrack: remove 'ignore_conntrack' argument from ↵Patrick McHardy2007-07-11
| | | | | | | | | nf_conntrack_find_get All callers pass NULL, this also doesn't seem very useful for modules. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: nf_conntrack: remove old memory allocator of conntrackYasuyuki Kozakai2007-07-11
| | | | | | | | | Now memory space for help and NAT are allocated by extension infrastructure. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: x_tables: mark matches and targets __read_mostlyPatrick McHardy2007-07-11
| | | | | Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: x_tables: add TRACE targetJozsef Kadlecsik2007-07-11
| | | | | | | | | The TRACE target can be used to follow IP and IPv6 packets through the ruleset. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick NcHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: Remove redundant parentheses/bracesJan Engelhardt2007-07-11
| | | | | | | | | Removes redundant parentheses and braces (And add one pair in a xt_tcpudp.c macro). Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: add some consts, remove some castsJan Engelhardt2007-07-11
| | | | | | | | Make a number of variables const and/or remove unneeded casts. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: x_tables: switch xt_target->checkentry to boolJan Engelhardt2007-07-11
| | | | | | | | Switch the return type of target checkentry functions to boolean. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: x_tables: switch xt_match->checkentry to boolJan Engelhardt2007-07-11
| | | | | | | | Switch the return type of match functions to boolean Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: x_tables: switch xt_match->match to boolJan Engelhardt2007-07-11
| | | | | | | | Switch the return type of match functions to boolean Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NETFILTER]: x_tables: switch hotdrop to boolJan Engelhardt2007-07-11
| | | | | | | | Switch the "hotdrop" variables to boolean Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: IPV6 checksum offloading in network devicesStephen Hemminger2007-07-11
| | | | | | | | | | | | | | | The existing model for checksum offload does not correctly handle devices that can offload IPV4 and IPV6 only. The NETIF_F_HW_CSUM flag implies device can do any arbitrary protocol. This patch: * adds NETIF_F_IPV6_CSUM for those devices * fixes bnx2 and tg3 devices that need it * add NETIF_F_IPV6_CSUM to ipv6 output (incl GSO) * fixes assumptions about NETIF_F_ALL_CSUM in nat * adjusts bridge union of checksumming computation Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: Add module alias for transformation type.Masahide NAKAMURA2007-07-11
| | | | | | | | | | | | | | | It is clean-up for XFRM type modules and adds aliases with its protocol: ESP, AH, IPCOMP, IPIP and IPv6 for IPsec ROUTING and DSTOPTS for MIPv6 It is almost the same thing as XFRM mode alias, but it is added new defines XFRM_PROTO_XXX for preprocessing since some protocols are defined as enum. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Acked-by: Ingo Oeser <netdev@axxeo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6] MIP6: Loadable module support for MIPv6.Masahide NAKAMURA2007-07-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes MIPv6 loadable module named "mip6". Here is a modprobe.conf(5) example to load it automatically when user application uses XFRM state for MIPv6: alias xfrm-type-10-43 mip6 alias xfrm-type-10-60 mip6 Some MIPv6 feature is not included by this modular, however, it should not be affected to other features like either IPsec or IPv6 with and without the patch. We may discuss XFRM, MH (RAW socket) and ancillary data/sockopt separately for future work. Loadable features: * MH receiving check (to send ICMP error back) * RO header parsing and building (i.e. RH2 and HAO in DSTOPTS) * XFRM policy/state database handling for RO These are NOT covered as loadable: * Home Address flags and its rule on source address selection * XFRM sub policy (depends on its own kernel option) * XFRM functions to receive RO as IPv6 extension header * MH sending/receiving through raw socket if user application opens it (since raw socket allows to do so) * RH2 sending as ancillary data * RH2 operation with setsockopt(2) Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6] MIP6: Kill unnecessary ifdefs.Masahide NAKAMURA2007-07-11
| | | | | | | | | | | Kill unnecessary CONFIG_IPV6_MIP6. o It is redundant for RAW socket to keep MH out with the config then it can handle any protocol. o Clean-up at AH. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-18 08:59:53 -0500