aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv6/esp6.c
Commit message (Collapse)AuthorAge
* ipsec: Interfamily IPSec BEET, ipv4-inner ipv6-outerJoakim Koskela2008-08-06
| | | | | | | | | | | | | Here's a revised version, based on Herbert's comments, of a fix for the ipv4-inner, ipv6-outer interfamily ipsec beet mode. It fixes the network header adjustment during interfamily, as well as makes sure that we reserve enough room for the new ipv6 header if we might have something else as the inner family. Also, the ipv4 pseudo header construction was added. Signed-off-by: Joakim Koskela <jookos@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [ESP]: Ensure IV is in linear part of the skb to avoid BUG() due to OOB accessThomas Graf2008-03-27
| | | | | | | | | | | | | ESP does not account for the IV size when calling pskb_may_pull() to ensure everything it accesses directly is within the linear part of a potential fragment. This results in a BUG() being triggered when the both the IPv4 and IPv6 ESP stack is fed with an skb where the first fragment ends between the end of the esp header and the end of the IV. This bug was found by Dirk Nehring <dnehring@gmx.net> . Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Fix bogus usage of u64 on input sequence numberHerbert Xu2008-02-13
| | | | | | | | | Al Viro spotted a bogus use of u64 on the input sequence number which is big-endian. This patch fixes it by giving the input sequence number its own member in the xfrm_skb_cb structure. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: constify 'struct xfrm_type'Eric Dumazet2008-01-31
| | | | | Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Add support for combined mode algorithmsHerbert Xu2008-01-31
| | | | | | | | | | | | | | | | This patch adds support for combined mode algorithms with GCM being the first algorithm supported. Combined mode algorithms can be added through the xfrm_user interface using the new algorithm payload type XFRMA_ALG_AEAD. Each algorithms is identified by its name and the ICV length. For the purposes of matching algorithms in xfrm_tmpl structures, combined mode algorithms occupy the same name space as encryption algorithms. This is in line with how they are negotiated using IKE. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Use crypto_aead and authenc in ESPHerbert Xu2008-01-31
| | | | | | | | | This patch converts ESP to use the crypto_aead interface and in particular the authenc algorithm. This lays the foundations for future support of combined mode algorithms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Move all calls to xfrm_audit_state_icvfail to xfrm_inputHerbert Xu2008-01-28
| | | | | | | Let's nip the code duplication in the bud :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: RFC4303 compliant auditingPaul Moore2008-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a number of new IPsec audit events to meet the auditing requirements of RFC4303. This includes audit hooks for the following events: * Could not find a valid SA [sections 2.1, 3.4.2] . xfrm_audit_state_notfound() . xfrm_audit_state_notfound_simple() * Sequence number overflow [section 3.3.3] . xfrm_audit_state_replay_overflow() * Replayed packet [section 3.4.3] . xfrm_audit_state_replay() * Integrity check failure [sections 3.4.4.1, 3.4.4.2] . xfrm_audit_state_icvfail() While RFC4304 deals only with ESP most of the changes in this patch apply to IPsec in general, i.e. both AH and ESP. The one case, integrity check failure, where ESP specific code had to be modified the same was done to the AH code for the sake of consistency. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Move state lock into x->type->inputHerbert Xu2008-01-28
| | | | | | | | | | | | This patch releases the lock on the state before calling x->type->input. It also adds the lock to the spots where they're currently needed. Most of those places (all except mip6) are expected to disappear with async crypto. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Move integrity stat collection into xfrm_inputHerbert Xu2008-01-28
| | | | | | | | | | | | | | | | Similar to the moving out of the replay processing on the output, this patch moves the integrity stat collectin from x->type->input into xfrm_input. This would eventually allow transforms such as AH/ESP to be lockless. The error value EBADMSG (currently unused in the crypto layer) is used to indicate a failed integrity check. In future this error can be directly returned by the crypto layer once we switch to aead algorithms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPv6] ESP: Discard dummy packets introduced in rfc4303Thomas Graf2007-12-11
| | | | | | | | | | RFC4303 introduces dummy packets with a nexthdr value of 59 to implement traffic confidentiality. Such packets need to be dropped silently and the payload may not be attempted to be parsed as it consists of random chunk. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Fix incorrect sg_mark_end() calls.David S. Miller2007-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes scatterlist corruptions added by commit 68e3f5dd4db62619fdbe520d36c9ebf62e672256 [CRYPTO] users: Fix up scatterlist conversion errors The issue is that the code calls sg_mark_end() which clobbers the sg_page() pointer of the final scatterlist entry. The first part fo the fix makes skb_to_sgvec() do __sg_mark_end(). After considering all skb_to_sgvec() call sites the most correct solution is to call __sg_mark_end() in skb_to_sgvec() since that is what all of the callers would end up doing anyways. I suspect this might have fixed some problems in virtio_net which is the sole non-crypto user of skb_to_sgvec(). Other similar sg_mark_end() cases were converted over to __sg_mark_end() as well. Arguably sg_mark_end() is a poorly named function because it doesn't just "mark", it clears out the page pointer as a side effect, which is what led to these bugs in the first place. The one remaining plain sg_mark_end() call is in scsi_alloc_sgtable() and arguably it could be converted to __sg_mark_end() if only so that we can delete this confusing interface from linux/scatterlist.h Signed-off-by: David S. Miller <davem@davemloft.net>
* [CRYPTO] users: Fix up scatterlist conversion errorsHerbert Xu2007-10-27
| | | | | | | | | This patch fixes the errors made in the users of the crypto layer during the sg_init_table conversion. It also adds a few conversions that were missing altogether. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [INET] ESP: Must #include <linux/scatterlist.h>Adrian Bunk2007-10-27
| | | | | | | | | | | | | | | | | | | | | | This patch fixes the following compile errors in some configurations: <-- snip --> ... CC net/ipv4/esp4.o /home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv4/esp4.c: In function 'esp_output': /home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv4/esp4.c:113: error: implicit declaration of function 'sg_init_table' make[3]: *** [net/ipv4/esp4.o] Error 1 ... /home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv6/esp6.c: In function 'esp6_output': /home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv6/esp6.c:112: error: implicit declaration of function 'sg_init_table' make[3]: *** [net/ipv6/esp6.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Add missing sg_init_table() calls to ESP.David S. Miller2007-10-26
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC] IPV6: Fix to add tunnel mode SA correctly.Masahide NAKAMURA2007-10-22
| | | | | Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Disallow combinations of RO and AH/ESP/IPCOMPHerbert Xu2007-10-18
| | | | | | | | | | | | Combining RO and AH/ESP/IPCOMP does not make sense. So this patch adds a check in the state initialisation function to prevent this. This allows us to safely remove the mode input function of RO since it can never be called anymore. Indeed, if somehow it does get called we'll know about it through an OOPS instead of it slipping past silently. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Move IP length/checksum setting out of transformsHerbert Xu2007-10-10
| | | | | | | | | | | | This patch moves the setting of the IP length and checksum fields out of the transforms and into the xfrmX_output functions. This would help future efforts in merging the transforms themselves. It also adds an optimisation to ipcomp due to the fact that the transport offset is guaranteed to be zero. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Get rid of ipv6_{auth,esp,comp}_hdrHerbert Xu2007-10-10
| | | | | | | | | | | | | This patch removes the duplicate ipv6_{auth,esp,comp}_hdr structures since they're identical to the IPv4 versions. Duplicating them would only create problems for ourselves later when we need to add things like extended sequence numbers. I've also added transport header type conversion headers for these types which are now used by the transforms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Set skb->data to payload in x->mode->outputHerbert Xu2007-10-10
| | | | | | | | | | | | | | | | This patch changes the calling convention so that on entry from x->mode->output and before entry into x->type->output skb->data will point to the payload instead of the IP header. This is essentially a redistribution of skb_push/skb_pull calls with the aim of minimising them on the common path of tunnel + ESP. It'll also let us use the same calling convention between IPv4 and IPv6 with the next patch. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Move state lock into x->type->outputHerbert Xu2007-10-10
| | | | | | | | | | | This patch releases the lock on the state before calling x->type->output. It also adds the lock to the spots where they're currently needed. Most of those places (all except mip6) are expected to disappear with async crypto. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Store IPv6 nh pointer in mac_header on outputHerbert Xu2007-10-10
| | | | | | | | | | | | | | | | | | | | Current the x->mode->output functions store the IPv6 nh pointer in the skb network header. This is inconvenient because the network header then has to be fixed up before the packet can leave the IPsec stack. The mac header field is unused on output so we can use that to store this instead. This patch does that and removes the network header fix-up in xfrm_output. It also uses ipv6_hdr where appropriate in the x->type->output functions. There is also a minor clean-up in esp4 to make it use the same code as esp6 to help any subsequent effort to merge the two. Lastly it kills two redundant skb_set_* statements in BEET that were simply copied over from transport mode. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Move output replay code into xfrm_outputHerbert Xu2007-10-10
| | | | | | | | | | The replay counter is one of only two remaining things in the output code that requires a lock on the xfrm state (the other being the crypto). This patch moves it into the generic xfrm_output so we can remove the lock from the transforms themselves. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC] esp: Remove keys from esp_data structureHerbert Xu2007-10-10
| | | | | | | | | | | The keys are only used during initialisation so we don't need to carry them in esp_data. Since we don't have to allocate them again, there is no need to place a limit on the authentication key length anymore. This patch also kills the unused auth.icv member. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: Add module alias for transformation type.Masahide NAKAMURA2007-07-11
| | | | | | | | | | | | | | | It is clean-up for XFRM type modules and adds aliases with its protocol: ESP, AH, IPCOMP, IPIP and IPv6 for IPsec ROUTING and DSTOPTS for MIPv6 It is almost the same thing as XFRM mode alias, but it is added new defines XFRM_PROTO_XXX for preprocessing since some protocols are defined as enum. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Acked-by: Ingo Oeser <netdev@axxeo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: Optimize MTU calculationPatrick McHardy2007-04-26
| | | | | | | | | | | Replace the probing based MTU estimation, which usually takes 2-3 iterations to find a fitting value and may underestimate the MTU, by an exact calculation. Also fix underestimation of the XFRM trailer_len, which causes unnecessary reallocations. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: esp: fix skb_tail_pointer conversion bugPatrick McHardy2007-04-26
| | | | | | | | | | | | | | | Fix incorrect switch of "trailer" skb by "skb" during skb_tail_pointer conversion: - *(u8*)(trailer->tail - 1) = top_iph->protocol; + *(skb_tail_pointer(skb) - 1) = top_iph->protocol; - *(u8 *)(trailer->tail - 1) = *skb_network_header(skb); + *(skb_tail_pointer(skb) - 1) = *skb_network_header(skb); Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo2007-04-26
| | | | | | | | | | | | | | | So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Introduce skb_network_header_lenArnaldo Carvalho de Melo2007-04-26
| | | | | | | | | | For the common sequence "skb->h.raw - skb->nh.raw", similar to skb->mac_len, that is precalculated tho, don't think we need to bloat skb with one more member, so just use this new helper, reducing the number of non-skbuff.h references to the layer headers even more. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Introduce skb_transport_header(skb)Arnaldo Carvalho de Melo2007-04-26
| | | | | | | | | For the places where we need a pointer to the transport header, it is still legal to touch skb->h.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Introduce skb_set_transport_headerArnaldo Carvalho de Melo2007-04-26
| | | | | | | | For the cases where the transport header is being set to a offset from skb->data. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Introduce skb_transport_offset()Arnaldo Carvalho de Melo2007-04-26
| | | | | | | For the quite common 'skb->h.raw - skb->data' sequence. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6hArnaldo Carvalho de Melo2007-04-26
| | | | | | | | | | Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SK_BUFF]: Introduce skb_network_header()Arnaldo Carvalho de Melo2007-04-26
| | | | | | | | | For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET] IPV6: Fix whitespace errors.YOSHIFUJI Hideaki2007-02-11
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: 'info' argument of ipv6 ->err_handler() is net-endianAl Viro2006-12-03
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC] esp: Defer output IV initialization to first use.David S. Miller2006-09-22
| | | | | | | | | | | | | | First of all, if the xfrm_state only gets used for input packets this entropy is a complete waste. Secondly, it is often the case that a configuration loads many rules (perhaps even dynamically) and they don't all necessarily ever get used. This get_random_bytes() call was showing up in the profiles for xfrm_state inserts which is how I noticed this. Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM] STATE: Add a hook to find offset to be inserted header in outbound.Masahide NAKAMURA2006-09-22
| | | | | | | | | | | | | | | On current kernel, ip6_find_1stfragopt() is used by IPv6 IPsec to find offset to be inserted header in outbound for transport mode. (BTW, no usage may be needed for IPv4 case.) Mobile IPv6 requires another logic for routing header and destination options header respectively. This patch is common platform for the offset and adopts it to IPsec. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: Add XFRM_MODE_xxx for future use.Masahide NAKAMURA2006-09-22
| | | | | | | | | | | | | Transformation mode is used as either IPsec transport or tunnel. It is required to add two more items, route optimization and inbound trigger for Mobile IPv6. Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Use HMAC template and hash interfaceHerbert Xu2006-09-20
| | | | | | | | | | | | | This patch converts IPsec to use the new HMAC template. The names of existing simple digest algorithms may still be used to refer to their HMAC composites. The same structure can be used by other MACs such as AES-XCBC-MAC. This patch also switches from the digest interface to hash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC] ESP: Use block ciphers where applicableHerbert Xu2006-09-20
| | | | | | | | This patch converts IPSec/ESP to use the new block cipher type where applicable. Similar to the HMAC conversion, existing algorithm names have been kept for compatibility. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-30
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [IPSEC] proto: Move transport mode input path into xfrm_mode_transportHerbert Xu2006-06-18
| | | | | | | | | | | | | | | | | Now that we have xfrm_mode objects we can move the transport mode specific input decapsulation code into xfrm_mode_transport. This removes duplicate code as well as unnecessary header movement in case of tunnel mode SAs since we will discard the original IP header immediately. This also fixes a minor bug for transport-mode ESP where the IP payload length is set to the correct value minus the header length (with extension headers for IPv6). Of course the other neat thing is that we no longer have to allocate temporary buffers to hold the IP headers for ESP and IPComp. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Kill unused decap state argumentHerbert Xu2006-04-01
| | | | | | | | | | | | | | This patch removes the decap_state argument from the xfrm input hook. Previously this function allowed the input hook to share state with the post_input hook. The latter has since been removed. The only purpose for it now is to check the encap type. However, it is easier and better to move the encap type check to the generic xfrm_rcv function. This allows us to get rid of the decap state argument altogether. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPV6]: Nearly complete kzalloc cleanup for net/ipv6Ingo Oeser2006-03-21
| | | | | | | | Stupidly use kzalloc() instead of kmalloc()/memset() everywhere where this is possible in net/ipv6/*.c . Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Sync series - fast pathJamal Hadi Salim2006-03-20
| | | | | | | | Fast path sequence updates that will generate ipsec async events Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Use NIP6_FMT in kernel.hJoe Perches2006-01-13
| | | | | | | | | | | | | | | | | | | There are errors and inconsistency in the display of NIP6 strings. ie: net/ipv6/ip6_flowlabel.c There are errors and inconsistency in the display of NIPQUAD strings too. ie: net/netfilter/nf_conntrack_ftp.c This patch: adds NIP6_FMT to kernel.h changes all code to use NIP6_FMT fixes net/ipv6/ip6_flowlabel.c adds NIPQUAD_FMT to kernel.h fixes net/netfilter/nf_conntrack_ftp.c changes a few uses of "%u.%u.%u.%u" to NIPQUAD_FMT for symmetry to NIP6_FMT Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.hArnaldo Carvalho de Melo2006-01-03
| | | | | | | | | | | To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPv6] IPsec: fix pmtu calculation of espKazunori MIYAZAWA2005-12-09
| | | | | | | | | | | It is a simple bug which uses the wrong member. This bug does not seriously affect ordinary use of IPsec. But it is important to pass IPv6 ready logo phase-2 conformance test of IPsec SGW. Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC] Fix block size/MTU bugs in ESPHerbert Xu2005-10-11
| | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following bugs in ESP: * Fix transport mode MTU overestimate. This means that the inner MTU is smaller than it needs be. Worse yet, given an input MTU which is a multiple of 4 it will always produce an estimate which is not a multiple of 4. For example, given a standard ESP/3DES/MD5 transform and an MTU of 1500, the resulting MTU for transport mode is 1462 when it should be 1464. The reason for this is because IP header lengths are always a multiple of 4 for IPv4 and 8 for IPv6. * Ensure that the block size is at least 4. This is required by RFC2406 and corresponds to what the esp_output function does. At the moment this only affects crypto_null as its block size is 1. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-24 11:12:00 -0500