aboutsummaryrefslogtreecommitdiffstats
path: root/net/ieee80211
Commit message (Collapse)AuthorAge
* [PATCH] ieee80211: TKIP requires CRC32Chuck Ebbert2006-07-27
| | | | | | | | | | | | | ieee80211_crypt_tkip will not work without CRC32. LD .tmp_vmlinux1 net/built-in.o: In function `ieee80211_tkip_encrypt': net/ieee80211/ieee80211_crypt_tkip.c:349: undefined reference to `crc32_le' Reported by Toralf Foerster <toralf.foerster@gmx.de> Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: do shared key auth in workqueueDaniel Drake2006-07-27
| | | | | | | | | | | | | | | | | | | Johann Uhrmann reported a bcm43xx crash and Michael Buesch tracked it down to a problem with the new shared key auth code (recursive calls into the driver) This patch (effectively Michael's patch with a couple of small modifications) solves the problem by sending the authentication challenge response frame from a workqueue entry. I also removed a lone \n from the bcm43xx messages relating to authentication mode - this small change was previously discussed but not patched in. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [NET]: Conversions from kmalloc+memset to k(z|c)alloc.Panagiotis Issaris2006-07-21
| | | | | | Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] softmac: fix build-break from 881ee6999d66c8fc903b429b73bbe6045b38c549John W. Linville2006-07-05
| | | | Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] CONFIG_WIRELESS_EXT is neccessary after allHorms2006-07-05
| | | | | | | | | | | | | | | | | | | | | WARNING: /lib/modules/2.6.17-mm2/kernel/net/ieee80211/ieee80211.ko needs unknown symbol wireless_spy_update Someone removed the `#ifdef CONFIG_WIRELESS_EXT' from around the callsite in net/ieee80211/ieee80211_rx.c and didn't update Kconfig appropriately. The offending patchset seems to be 35c14b855f52c49e4f3d078b9532b056005ed321 which is tittled [PATCH] ieee80211: remove unnecessary CONFIG_WIRELESS_EXT checking After a quick look it seems that wireless_spy_update() lives in net/core/wirless.c, and that file is only compiled if CONFIG_WIRELESS_EXT is set. Perhaps this is Kconig work, but in the mean time here is a reversal of the recent change. Signed-Off-By: Horms <horms@verge.net.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] SoftMAC: Add network to ieee80211softmac_call_events when associate ↵Joseph Jezak2006-07-05
| | | | | | | | | | | times out The ieee80211softmac_call_events function, when called with event type IEEE80211SOFTMAC_EVENT_ASSOCIATE_TIMEOUT should pass the network as the third parameter. This patch does that. Signed-off-by: Joseph Jezak <josejx@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] SoftMAC: Prevent multiple authentication attempts on the same networkJoseph Jezak2006-07-05
| | | | | | | | | | | | | | This patch addresses the "No queue exists" messages commonly seen during authentication and associating. These appear due to scheduling multiple authentication attempts on the same network. To prevent this, I added a flag to stop multiple authentication attempts by the association layer. I also added a check to the wx handler to see if we're connecting to a different network than the one already in progress. This scenario was causing multiple requests on the same network because the network BSSID was not being updated despite the fact that the ESSID changed. Signed-off-by: Joseph Jezak <josejx@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] 2.6.17 missing a call to ieee80211softmac_capabilities from ↵Larry Finger2006-07-05
| | | | | | | | | | | | | | | | | | | | | | | | | ieee80211softmac_assoc_req In commit ba9b28d19a3251bb1dfe6a6f8cc89b96fb85f683, routine ieee80211softmac_capabilities was added to ieee80211softmac_io.c. As denoted by its name, it completes the capabilities IE that is needed in the associate and reassociate requests sent to the AP. For at least one AP, the Linksys WRT54G V5, the capabilities field must set the 'short preamble' bit or the AP refuses to associate. In the commit noted above, there is a call to the new routine from ieee80211softmac_reassoc_req, but not from ieee80211softmac_assoc_req. This patch fixes that oversight. As noted in the subject, v2.6.17 is affected. My bcm43xx card had been unable to associate since I was forced to buy a new AP. I finally was able to get a packet dump and traced the problem to the capabilities info. Although I had heard that a patch was "floating around", I had not seen it before 2.6.17 was released. As this bug does not affect security and I seem to have the only AP affected by it, there should be no problem in leaving it for 2.6.18. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] skb used after passing to netif_rx in net/ieee80211/ieee80211_rx.cEric Sesterhenn2006-07-05
| | | | | | | | this patch fixes coverity id #913. ieee80211_monitor_rx() passes the skb to netif_rx() and we should not reference it any longer. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] ieee80211: fix not allocating IV+ICV space when usingencryption in ↵Hong Liu2006-07-05
| | | | | | | | | | | ieee80211_tx_frame We should preallocate IV+ICV space when encrypting the frame. Currently no problem shows up just because dev_alloc_skb aligns the data len to SMP_CACHE_BYTES which can be used for ICV. Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-30
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] wireless: correct dump of WPA IELarry Finger2006-06-15
| | | | | | | | | | | | In net/ieee80211/softmac/ieee80211softmac_wx.c, there is a bug that prints extended sign information whenever the byte value exceeds 0x7f. The following patch changes the printk to use a u8 cast to limit the output to 2 digits. This bug was first noticed by Dan Williams <dcbw@redhat.com>. This patch applies to the current master branch of the Linville tree. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: unified capabilities computationJoseph Jezak2006-06-05
| | | | | | | | | | This patch moves the capabilities field computation to a function for clarity and adds some previously unimplemented bits. Signed off by Joseph Jezak <josejx@gentoo.org> Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-By: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: Fix handling of authentication failureDaniel Drake2006-06-05
| | | | | | | | | | | | | | | | | | | | My router blew up earlier, but exhibited some interesting behaviour during its dying moments. It was broadcasting beacons but wouldn't respond to any authentication requests. I noticed that softmac wasn't playing nice with this, as I couldn't make it try to connect to other networks after it had timed out authenticating to my ill router. To resolve this, I modified the softmac event/notify API to pass the event code to the callback, so that callbacks being notified from IEEE80211SOFTMAC_EVENT_ANY masks can make some judgement. In this case, the ieee80211softmac_assoc callback needs to make a decision based upon whether the association passed or failed. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: complete shared key authenticationDaniel Drake2006-06-05
| | | | | | | | | | | | | | | | | | This patch finishes of the partially-complete shared key authentication implementation in softmac. The complication here is that we need to encrypt a management frame during the authentication process. I don't think there are any other scenarios where this would have to happen. To get around this without causing too many headaches, we decided to just use software encryption for this frame. The softmac config option now selects IEEE80211_CRYPT_WEP so that we can ensure this available. This also involved a modification to some otherwise unused ieee80211 API. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] ieee80211softmac_io.c: fix warning "defined but not used"Toralf Förster2006-06-05
| | | | | | | | | | | | Got this compiler warning and Johannes Berg <johannes@sipsolutions.net> wrote: Yeah, known 'bug', we have that code there but never use it. Feel free to submit a patch (to John Linville, CC netdev and softmac-dev) to remove it. Signed-off-by: Toralf Foerster <toralf.foerster@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: suggest per-frame-type TX rateDaniel Drake2006-05-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is the first step towards rate control inside softmac. The txrates substructure has been extended to provide different fields for different types of packets (management/data, unicast/multicast). These fields are updated on association to values compatible with the access point we are associating to. Drivers can then use the new ieee80211softmac_suggest_txrate() function call when deciding which rate to transmit each frame at. This is immensely useful for ZD1211, and bcm can use it too. The user can still specify a rate through iwconfig, which is matched for all transmissions (assuming the rate they have specified is in the rate set required by the AP). At a later date, we can incorporate automatic rate management into the ieee80211softmac_recalc_txrates() function. This patch also removes the mcast_fallback field. Sam Leffler pointed out that this field is meaningless, because no driver will ever be retransmitting mcast frames (they are not acked). Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] ieee80211_wx.c: remove dead codeAdrian Bunk2006-05-05
| | | | | | | | | | | Since sec->key_sizes[] is an u8, len can't be < 0. Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: deauthentication implies deassociationDaniel Drake2006-05-05
| | | | | | | | | | The 802.11 specs state that deauthenticating also implies disassociating. This patch implements that, which improve the behaviour of SIOCSIWMLME. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'upstream-fixes' into upstreamJohn W. Linville2006-05-05
|\
| * [PATCH] softmac: make non-operational after being stoppedDaniel Drake2006-05-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | zd1211 with softmac and wpa_supplicant revealed an issue with softmac and the use of workqueues. Some of the work functions actually reschedule themselves, so this meant that there could still be pending work after flush_scheduled_work() had been called during ieee80211softmac_stop(). This patch introduces a "running" flag which is used to ensure that rescheduling does not happen in this situation. I also used this flag to ensure that softmac's hooks into ieee80211 are non-operational once the stop operation has been started. This simply makes softmac a little more robust, because I could crash it easily by receiving frames in the short timeframe after shutting down softmac and before turning off the ZD1211 radio. (ZD1211 is now fixed as well!) Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * [PATCH] softmac: don't reassociate if user asked for deauthenticationDaniel Drake2006-05-05
| | | | | | | | | | | | | | | | | | | | | | | | | | When wpa_supplicant exits, it uses SIOCSIWMLME to request deauthentication. softmac then tries to reassociate without any user intervention, which isn't the desired behaviour of this signal. This change makes softmac only attempt reassociation if the remote network itself deauthenticated us. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | [PATCH] softmac: clean up event handling codeJohannes Berg2006-04-24
| | | | | | | | | | | | | | | | | | This patch cleans up the event handling code in ieee80211softmac_event.c and makes the module slightly smaller by removing some strings that are not used any more and consolidating some code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | [PATCH] softmac: add SIOCSIWMLMEJohannes Berg2006-04-24
| | | | | | | | | | | | | | | | | | This patch adds the SIOCSIWMLME wext to softmac, this functionality appears to be used by wpa_supplicant and is softmac-specific. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jouni Malinen <jkm@devicescape.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | [PATCH] ieee80211: replace debug IEEE80211_WARNING with each own debug macroZhu Yi2006-04-24
| | | | | | | | | | Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | [PATCH] ieee80211: remove unnecessary CONFIG_WIRELESS_EXT checkingZhu Yi2006-04-24
| | | | | | | | | | Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | [PATCH] ieee80211: export list of bit rates with standard WEXT procdduresZhu Yi2006-04-24
| | | | | | | | | | | | | | | | | | | | The patch replace the way to export the list of bit rates in scan results from IWEVCUSTOM to SIOCGIWRATE. It also removes the max_rate item exported with SIOCGIWRATE since this should be done by userspace. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | [PATCH] ieee80211: Fix TX code doesn't enable QoS when using WPA + QoSZhu Yi2006-04-24
| | | | | | | | | | | | | | | | | | | | | | Fix ieee80211 TX code when using WPA+QOS. TKIP/CCMP will use the TID field of qos_ctl in 802.11 frame header to do encryption. We cannot ignore this field when doing host encryption and add the qos_ctl field later. Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | [PATCH] ieee80211: Fix TKIP MIC calculation for QoS framesZhu Yi2006-04-24
|/ | | | | | | | Fix TKIP MIC verification failure when receiving QoS frames from AP. Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: fix SIOCSIWAPJohannes Berg2006-04-24
| | | | | | | | | | | There are some bugs in the current implementation of the SIOCSIWAP wext, for example that when you do it twice and it fails, it may still try another access point for some reason. This patch fixes this by introducing a new flag that tells the association code that the bssid that is in use was fixed by the user and shouldn't be deviated from. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: report when scanning has finishedJohannes Berg2006-04-19
| | | | | | | | | Make softmac report a scan event when scanning has finished, that way userspace can wait for the event to happen instead of polling for the results. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: fix event sendingJohannes Berg2006-04-19
| | | | | | | | | | Softmac is sending custom events to userspace already, but it should _really_ be sending the right WEXT events instead. This patch fixes that. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: handle iw_mode properlyjohannes@sipsolutions.net2006-04-19
| | | | | | | | | Below patch allows using iw_mode auto with softmac. bcm43xx forces managed so this bug wasn't noticed earlier, but this was one of the problems why zd1211 didn't work earlier. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: dont send out packets while scanningjohannes@sipsolutions.net2006-04-19
| | | | | | | | Seems we forgot to stop the queue while scanning. Better do that so we don't transmit packets all the time during background scanning. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: return -EAGAIN from getscan while scanningjohannes@sipsolutions.net2006-04-19
| | | | | | | | | | Below patch was developed after discussion with Daniel Drake who mentioned to me that wireless tools expect an EAGAIN return from getscan so that they can wait for the scan to finish before printing out the results. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: fix spinlock recursion on reassocMichael Buesch2006-04-19
| | | | | | | | | | | | | | | | | This fixes a spinlock recursion on receiving a reassoc request. On reassoc, the softmac calls back into the driver. This results in a driver lock recursion. This schedules the assoc workqueue, instead of calling it directly. Probably, we should defer the _whole_ management frame processing to a tasklet or workqueue, because it does several callbacks into the driver. That is dangerous. This fix should go into linus's tree, before 2.6.17 is released, because it is remote exploitable (DoS by crash). Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac uses Wiress Ext.Randy Dunlap2006-04-19
| | | | | | | | softmac uses wireless extensions, so let it SELECT that config option; WARNING: "wireless_send_event" [net/ieee80211/softmac/ieee80211softmac.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: reduce default rate to 11Mbps.David Woodhouse2006-03-27
| | | | | | | | | | | | | | We don't make much of an attempt to fall back to lower rates, and 54M just isn't reliable enough for many people. In fact, it's not clear we even set it to 11M if we're trying to associate with an 802.11b AP. This patch makes us default to 11M, which ought to work for most people. When we actually handle dynamic rate adjustment, we can reconsider the defaults -- but even then, probably it makes as much sense to start at 11M and adjust it upwards as it does to start at 54M and reduce it. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: reduce scan dwell timeDavid Woodhouse2006-03-27
| | | | | | | | | It currently takes something like 8 seconds to do a scan, because we spend half a second on each channel. Reduce that time to 20ms per channel. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] Minor (janitorial) change to ieee80211Larry Finger2006-03-27
| | | | | | | | | The attached patch removes a potential problem from ieee80211_wx.c, by changing the name of routine ipw2100_translate_scan to ieee80211_translate_scan. The problem is minor as the routine is declared static; however, if it were made global, it would pollute the namespace. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] Restore channel setting after scan.David Woodhouse2006-03-23
| | | | | | | | | After a scan, we weren't switching back to the original channel if we were associated with an AP. So NetworkManager's periodic scans would disrupt connectivity until the ESSID was manually set again. Fix that. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: remove function_enter()John W. Linville2006-03-23
| | | | | | Remove the function_enter() debugging macros. Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] Fix softmac scanLarry Finger2006-03-22
| | | | | | | | Softmac scanning fails because the stop flag is not cleared before scanning is started. The attached one-line patch fixes this. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: remove dead codeJohannes Berg2006-03-22
| | | | | | | | This patch removes ieee80211softmac_reassoc which is neither implemented nor used nor necessary. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: add reassociation codeJohannes Berg2006-03-22
| | | | | | | | This patch adds handling of reassociation to softmac when the AP requests it. Patch from Larry Finger. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: update deauth handler to quiet warningJohannes Berg2006-03-22
| | | | | | | | | | Recently the deauth packet handler was updated to use a deauth packet struct (identical to the auth packet struct) and this now gives a warning. This patch updates the code to properly use a deauth struct and deauth variable. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] trivial fixes to softmacJohannes Berg2006-03-22
| | | | | | | | This patch removes a blank line that shouldn't be there and fixes a spelling error in softmac. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] update copyright in softmacJohannes Berg2006-03-22
| | | | | | | | This patch updates the copyright statements in softmac that I erroneously added for 2005 only (when we already had 2006). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] ieee80211_rx_any: filter out packets, call ieee80211_rx or ↵Denis Vlasenko2006-03-22
| | | | | | | | | | | | | | | | | | ieee80211_rx_mgt Version 2 of the patch. Added checks for version 0 and proper from/to DS bits. Even in promisc mode we won't receive packets from another BSSes. bcm43xx_rx() contains code to filter out packets from foreign BSSes and decide whether to call ieee80211_rx or ieee80211_rx_mgt. This is not bcm specific. Patch adapts that code and adds it to 80211 as ieee80211_rx_any() function. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [PATCH] softmac: move EXPORT_SYMBOL_GPL right after functionsJohannes Berg2006-03-22
| | | | Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-01 18:14:42 -0500