aboutsummaryrefslogtreecommitdiffstats
path: root/net/bluetooth/hidp
Commit message (Collapse)AuthorAge
* Bluetooth: Fix hidp disconnect deadlocks and lost wakeupPeter Hurley2011-06-30
| | | | | | | | | | | | | | | | | | | Partial revert of commit aabf6f89. When the hidp session thread was converted from kernel_thread to kthread, the atomic/wakeups were replaced with kthread_stop. kthread_stop has blocking semantics which are inappropriate for the hidp session kthread. In addition, the kthread signals itself to terminate in hidp_process_hid_control() - it cannot do this with kthread_stop(). Lastly, a wakeup can be lost if the wakeup happens between checking for the loop exit condition and setting the current state to TASK_INTERRUPTIBLE. (Without appropriate synchronization mechanisms, the task state should not be changed between the condition test and the yield - via schedule() - as this creates a race between the wakeup and resetting the state back to interruptible.) Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-05-23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (36 commits) HID: hid-multitouch: cosmetic changes, sort classes and devices HID: hid-multitouch: class MT_CLS_STANTUM is redundant with MT_CLS_CONFIDENCE HID: hid-multitouch: add support for Unitec panels HID: hid-multitouch: add support for Touch International panels HID: hid-multitouch: add support for GoodTouch panels HID: hid-multitouch: add support for CVTouch panels HID: hid-multitouch: add support for ActionStar panels HID: hiddev: fix race between hiddev_disconnect and hiddev_release HID: magicmouse: ignore 'ivalid report id' while switching modes HID: fix a crash in hid_report_raw_event() function. HID: hid-multitouch: add support for Elo TouchSystems 2515 IntelliTouch Plus HID: assorted usage updates from hut 1.12 HID: roccat: fix actual/startup profile sysfs attribute in koneplus HID: hid-multitouch: Add support for Lumio panels HID: 'name' and 'phys' in 'struct hid_device' can never be NULL HID: hid-multitouch: add support for Ilitek dual-touch panel HID: picolcd: Avoid compile warning/error triggered by copy_from_user() HID: add support for Logitech G27 wheel HID: hiddev: fix error path in hiddev_read when interrupted HID: add support for Sony Navigation Controller ...
| * HID: bt: hidp.h: do not use a tab after a #defineAntonio Ospite2011-04-21
| | | | | | | | | | Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Bluetooth: Move more channel info to struct l2cap_chanGustavo F. Padovan2011-04-28
| | | | | | | | | | | | | | In this commit, omtu, imtu, flush_to, mode and sport. It also remove the pi var from l2cap_sock_sendmsg(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* | Bluetooth: Use kthread API in hidpSzymon Janc2011-04-05
| | | | | | | | | | | | | | | | | | kernel_thread() is a low-level implementation detail and EXPORT_SYMBOL(kernel_thread) is scheduled for removal. Use the <linux/kthread.h> API instead. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* | Bluetooth: Fix checkpatch errors, code style issues and typos in hidpSzymon Janc2011-03-31
|/ | | | | Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-03-18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (48 commits) HID: add support for Logitech Driving Force Pro wheel HID: hid-ortek: remove spurious reference HID: add support for Ortek PKB-1700 HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor' HID: hid-ntrig: init settle and mode check HID: merge hid-egalax into hid-multitouch HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing HID: ntrig remove if and drop an indent HID: ACRUX - activate the device immediately after binding HID: ntrig: apply NO_INIT_REPORTS quirk HID: hid-magicmouse: Correct touch orientation direction HID: ntrig don't dereference unclaimed hidinput HID: Do not create input devices for feature reports HID: bt hidp: send Output reports using SET_REPORT on the Control channel HID: hid-sony.c: Fix sending Output reports to the Sixaxis HID: add support for Keytouch IEC 60945 HID: Add HID Report Descriptor to sysfs HID: add IRTOUCH infrared USB to hid_have_special_driver HID: kernel oops in out_cleanup in function hidinput_connect HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE) ...
| *-. Merge branches 'dragonrise', 'hidraw-feature', 'multitouch', 'ntrig', ↵Jiri Kosina2011-03-17
| |\ \ | | | | | | | | | | | | 'roccat', 'upstream' and 'upstream-fixes' into for-linus
| | | * HID: bt hidp: send Output reports using SET_REPORT on the Control channelAntonio Ospite2011-02-22
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation of hidp_output_raw_report() relies only on the Control channel even for Output reports, and the BT HID specification [1] does not mention using the DATA message for Output reports on the Control channel (see section 7.9.1 and also Figure 11: SET_ Flow Chart), so let us just use SET_REPORT. This also fixes sending Output reports to some devices (like Sony Sixaxis) which are not able to handle DATA messages on the Control channel. Ideally hidp_output_raw_report() could be improved to use this scheme: Feature Report -- SET_REPORT on the Control channel Output Report -- DATA on the Interrupt channel for more efficiency, but as said above, right now only the Control channel is used. [1] http://www.bluetooth.com/Specification%20Documents/HID_SPEC_V10.pdf Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: bt: Add support for hidraw HIDIOCGFEATURE and HIDIOCSFEATUREAlan Ott2011-02-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support or getting and setting feature reports for bluetooth HID devices from HIDRAW. Signed-off-by: Alan Ott <alan@signal11.us> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: bt: Wait for ACK on Sent ReportsAlan Ott2011-02-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wait for an ACK from the device before returning from hidp_output_raw_report(). This way, failures can be returned to the user application. Also, it prevents ACK/NAK packets from an output packet from being confused with ACK/NAK packets from an input request packet. Signed-off-by: Alan Ott <alan@signal11.us> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: bt: Move hid_add_device() call to after hidp_session() has started.Alan Ott2011-02-11
| |/ | | | | | | | | | | | | | | | | | | | | | | Move the call to hid_add_device() (which calls a device's probe() function) to after the kernel_thread() call which starts the hidp_session() thread. This ensures the Bluetooth receive socket is fully running by the time a device's probe() function is called. This way, a device can communicate (send and receive) with the Bluetooth device from its probe() function. Signed-off-by: Alan Ott <alan@signal11.us> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Bluetooth: remove l2cap_load() hackGustavo F. Padovan2011-02-15
| | | | | | | | | | | | | | l2cap_load() was added to trigger l2cap.ko module loading from the RFCOMM and BNEP modules. Now that L2CAP module is gone, we don't need it anymore. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* | Bluetooth: Do not use assignments in IF conditionsAndrei Emeltchenko2011-02-07
|/ | | | | | | Fix checkpatch warnings concerning assignments in if conditions. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: hidp: fix information leak to userlandVasiliy Kulikov2010-12-01
| | | | | | | | | | Structure hidp_conninfo is copied to userland with version, product, vendor and name fields unitialized if both session->input and session->hid are NULL. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: fix hidp kconfig dependency warningRandy Dunlap2010-11-08
| | | | | | | | | | Fix kconfig dependency warning to satisfy dependencies: warning: (BT_HIDP && NET && BT && BT_L2CAP && INPUT || USB_HID && HID_SUPPORT && USB && INPUT) selects HID which has unmet direct dependencies (HID_SUPPORT && INPUT) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* Bluetooth: make batostr() print in the right orderGustavo F. Padovan2010-10-12
| | | | | | | | | | The Bluetooth core uses the the BD_ADDR in the opposite order from the human readable order. So we are changing batostr() to print in the correct order and then removing some baswap(), as they are not needed anymore. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
* net: sk_sleep() helperEric Dumazet2010-04-20
| | | | | | | | | | | | | | | | | Define a new function to return the waitqueue of a "struct sock". static inline wait_queue_head_t *sk_sleep(struct sock *sk) { return sk->sk_sleep; } Change all read occurrences of sk_sleep by a call to this function. Needed for a future RCU conversion. sk_sleep wont be a field directly available. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-02-25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (41 commits) HID: usbhid: initialize interface pointers early enough HID: extend mask for BUTTON usage page HID: hid-ntrig: Single touch mode tap HID: hid-ntrig: multitouch cleanup and fix HID: n-trig: remove unnecessary tool switching HID: hid-ntrig add multi input quirk and clean up HID: usbhid: introduce timeout for stuck ctrl/out URBs HID: magicmouse: coding style and probe failure fixes HID: remove MODULE_VERSION from new drivers HID: fix up Kconfig entry for MagicMouse HID: add a device driver for the Apple Magic Mouse. HID: Export hid_register_report HID: Support for MosArt multitouch panel HID: add pressure support for the Stantum multitouch panel HID: fixed bug in single-touch emulation on the stantum panel HID: fix typo in error message HID: add mapping for "AL Network Chat" usage HID: use multi input quirk for TouchPack touchscreen HID: make full-fledged hid-bus drivers properly selectable HID: make Wacom modesetting failures non-fatal ...
| * HID: make raw reports possible for both feature and output reportsJiri Kosina2010-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 2da31939a42 ("Bluetooth: Implement raw output support for HIDP layer"), support for Bluetooth hid_output_raw_report was added, but it pushes the data to the intr socket instead of the ctrl one. This has been fixed by 6bf8268f9a91f1 ("Bluetooth: Use the control channel for raw HID reports") Still, it is necessary to distinguish whether the report in question should be either FEATURE or OUTPUT. For this, we have to extend the generic HID API, so that hid_output_raw_report() callback provides means to specify this value so that it can be passed down to lower level hardware drivers (currently Bluetooth and USB). Based on original patch by Bastien Nocera <hadess@hadess.net> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Bluetooth: Keep a copy of each HID device's report descriptorMichael Poole2010-02-05
|/ | | | | | | | | | | | The report descriptor is read by user space (via the Service Discovery Protocol), so it is only available during the ioctl to connect. However, the HID probe function that needs the descriptor might not be called until a specific module is loaded. Keep a copy of the descriptor so it is available for later use. Signed-off-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Use the control channel for raw HID reportsBastien Nocera2010-01-30
| | | | | | | | | | | | In commit 2da31939a42f7a676a0bc5155d6a0a39ed8451f2, support for Bluetooth hid_output_raw_report was added, but it pushes the data to the interrupt channel instead of the contol one. This patch makes hid_output_raw_report use the control channel instead. Using the interrupt channel was a mistake. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix PTR_ERR return of wrong pointer in hidp_setup_hid()Roel Kluin2009-12-17
| | | | | | | Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Implement raw output support for HIDP layerJiri Kosina2009-12-03
| | | | | | | | | | | | Implement raw output callback which is used by hidraw to send raw data to the underlying device. Without this patch, the userspace hidraw-based applications can't send output reports to HID Bluetooth devices. Reported-and-tested-by: Brian Gunn <bgunn@solekai.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* net: pass kern to net_proto_family create functionEric Paris2009-11-06
| | | | | | | | | | | The generic __sock_create function has a kern argument which allows the security system to make decisions based on if a socket is being created by the kernel or by userspace. This patch passes that flag to the net_proto_family specific create function, so it can do the same thing. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mark net_proto_ops as constStephen Hemminger2009-10-07
| | | | | | | All usages of structure net_proto_ops should be declared const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* HID: consolidate connect and disconnect into core codeJiri Kosina2009-09-17
| | | | | | | | | | | HID core registers input, hidraw and hiddev devices, but leaves unregistering it up to the individual driver, which is not really nice. Let's move all the logic to the core. Reported-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Brian Rogers <brian@xyzw.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Bluetooth: Let HIDP grab the device reference for connectionsMarcel Holtmann2009-08-22
| | | | | | | | | | The core exports the hci_conn_hold_device() and hci_conn_put_device() functions for device reference of connections. Use this to ensure that the uevents from the parent are send after the child ones. Based on a report by Brian Rogers <brian@xyzw.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Disconnect HIDRAW devices on disconnectMarcel Holtmann2009-08-22
| | | | | | | | | | | Currently the HID subsystem will create HIDRAW devices for the transport driver, but it will not disconnect them. Until the HID subsytem gets fixed, ensure that HIDRAW and HIDDEV devices are disconnected when the Bluetooth HID device gets removed. Based on a patch from Brian Rogers <brian@xyzw.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Fix missing scheduling when VIRTUAL_CABLE_UNPLUG is receivedVikram Kandukuri2009-08-22
| | | | | | | | | | | There is a test case in PTS tool; PTS will send the VIRTUAL_CABLE_UNPLUG command to IUT. Then IUT should disconnect the channel and kill the HID session when it receives the command. The VIRTUAL_CABLE_UNPLUG command is parsed by HID transport, but it is not scheduled to do so. Add a call to hidp_schedule() to kill the session. Signed-off-by: Jothikumar Mothilal <jothikumar.mothilal@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Enable per-module dynamic debug messagesMarcel Holtmann2008-11-30
| | | | | | | | | | | With the introduction of CONFIG_DYNAMIC_PRINTK_DEBUG it is possible to allow debugging without having to recompile the kernel. This patch turns all BT_DBG() calls into pr_debug() to support dynamic debug messages. As a side effect all CONFIG_BT_*_DEBUG statements are now removed and some broken debug entries have been fixed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* HID: move connect quirksJiri Slaby2008-10-14
| | | | | | | | | Move connecting from usbhid to the hid layer and fix also hidp in that manner. This removes all the ignore/force hidinput/hiddev connecting quirks. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move apple quirksJiri Slaby2008-10-14
| | | | | | | Move them from the core code to a separate driver. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: move ignore quirksJiri Slaby2008-10-14
| | | | | | | | | Move ignore quirks from usbhid-quirks into hid-core code. Also don't output warning when ENODEV is error code in usbhid and try ordinal input in hidp when that error is returned. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: hid, make parsing event drivenJiri Slaby2008-10-14
| | | | | | | | | | | Next step for complete hid bus, this patch includes: - call parser either from probe or from hid-core if there is no probe. - add ll_driver structure and centralize some stuff there (open, close...) - split and merge usb_hid_configure and hid_probe into several functions to allow hooks/fixes between them Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: make a bus from hid codeJiri Slaby2008-10-14
| | | | | | | | | | | | | | | | Make a bus from hid core. This is the first step for converting all the quirks and separate almost-drivers into real drivers attached to this bus. It's implemented to change behaviour in very tiny manner, so that no driver needs to be changed this time. Also add generic drivers for both usb and bt into usbhid or hidp respectively which will bind all non-blacklisted device. Those blacklisted will be either grabbed by special drivers or by nobody if they are broken at the very rude base. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* [Bluetooth] Signal user-space for HIDP and BNEP socket errorsMarcel Holtmann2008-07-14
| | | | | | | | | When using the HIDP or BNEP kernel support, the user-space needs to know if the connection has been terminated for some reasons. Wake up the application if that happens. Otherwise kernel and user-space are no longer on the same page and weird behaviors can happen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* bluetooth: uninliningAndrew Morton2008-02-05
| | | | | | | | | | | | Remove all those inlines which were either a) unneeded or b) increased code size. text data bss dec hex filename before: 6997 74 8 7079 1ba7 net/bluetooth/hidp/core.o after: 6492 74 8 6574 19ae net/bluetooth/hidp/core.o Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bluetooth: hidp_process_hid_control remove unnecessary parameter dealingDave Young2008-02-05
| | | | | | | | | | | | | | | | | | According to the bluetooth HID spec v1.0 chapter 7.4.2 "This code requests a major state change in a BT-HID device. A HID_CONTROL request does not generate a HANDSHAKE response." "A HID_CONTROL packet with a parameter of VIRTUAL_CABLE_UNPLUG is the only HID_CONTROL packet a device can send to a host. A host will ignore all other packets." So in the hidp_precess_hid_control function, we just need to deal with the UNLUG packet. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [BLUETOOTH]: Use sockfd_put()Julia Lawall2008-01-28
| | | | | | | | | | | | | | | | | | | | | | | | The function sockfd_lookup uses fget on the value that is stored in the file field of the returned structure, so fput should ultimately be applied to this value. This can be done directly, but it seems better to use the specific macro sockfd_put, which does the same thing. The problem was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression s; @@ s = sockfd_lookup(...) ... + sockfd_put(s); ?- fput(s->file); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Convert init_timer into setup_timerPavel Emelyanov2008-01-28
| | | | | | | | | | | | | Many-many code in the kernel initialized the timer->function and timer->data together with calling init_timer(timer). There is already a helper for this. Use it for networking code. The patch is HUGE, but makes the code 130 lines shorter (98 insertions(+), 228 deletions(-)). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Forget the zero_it argument of sk_alloc()Pavel Emelyanov2007-11-01
| | | | | | | | | | | | | | | Finally, the zero_it argument can be completely removed from the callers and from the function prototype. Besides, fix the checkpatch.pl warnings about using the assignments inside if-s. This patch is rather big, and it is a part of the previous one. I splitted it wishing to make the patches more readable. Hope this particular split helped. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [Bluetooth] Fix wrong argument in debug code of HIDPDave Young2007-10-22
| | | | | | | | In the debug code of the hidp_queue_report function, the device variable does not exist, replace it with session->hid. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* get rid of input BIT* duplicate definesJiri Slaby2007-10-19
| | | | | | | | | | | | | | | | | | | | | | get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [BLUETOOTH]: Make hidp_setup_input() return intWANG Cong2007-10-10
| | | | | | | | | | | | | | This patch: - makes hidp_setup_input() return int to indicate errors; - checks its return value to handle errors. And this time it is against -rc7-mm1 tree. Thanks to roel and Marcel Holtmann for comments. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Make socket creation namespace safe.Eric W. Biederman2007-10-10
| | | | | | | | | | | | | | | | | | | | | | | This patch passes in the namespace a new socket should be created in and has the socket code do the appropriate reference counting. By virtue of this all socket create methods are touched. In addition the socket create methods are modified so that they will fail if you attempt to create a socket in a non-default network namespace. Failing if we attempt to create a socket outside of the default network namespace ensures that as we incrementally make the network stack network namespace aware we will not export functionality that someone has not audited and made certain is network namespace safe. Allowing us to partially enable network namespaces before all of the exotic protocols are supported. Any protocol layers I have missed will fail to compile because I now pass an extra parameter into the socket creation code. [ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki2007-07-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix use-after-free oops in Bluetooth HID.David Woodhouse2007-07-07
| | | | | | | | | | | | | | | | When cleaning up HIDP sessions, we currently close the ACL connection before deregistering the input device. Closing the ACL connection schedules a workqueue to remove the associated objects from sysfs, but the input device still refers to them -- and if the workqueue happens to run before the input device removal, the kernel will oops when trying to look up PHYSDEVPATH for the removed input device. Fix this by deregistering the input device before closing the connections. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'upstream-fixes' of ↵Linus Torvalds2007-05-11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid * 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: USB HID: hiddev - fix race between hiddev_send_event() and hiddev_release() HID: add hooks for getkeycode() and setkeycode() methods HID: switch to using input_dev->dev.parent USB HID: Logitech wheel 0x046d/0xc294 needs HID_QUIRK_NOGET quirk USB HID: usb_buffer_free() cleanup USB HID: report descriptor of Cypress USB barcode readers needs fixup Bluetooth HID: HIDP - don't initialize force feedback USB HID: update CONFIG_USB_HIDINPUT_POWERBOOK description HID: add input mappings for non-working keys on Logitech S510 remote
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-29 04:35:41 -0500