aboutsummaryrefslogtreecommitdiffstats
path: root/mm/mlock.c
Commit message (Collapse)AuthorAge
* mm: munlock use mapcount to avoid terrible overheadHugh Dickins2011-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A process spent 30 minutes exiting, just munlocking the pages of a large anonymous area that had been alternately mprotected into page-sized vmas: for every single page there's an anon_vma walk through all the other little vmas to find the right one. A general fix to that would be a lot more complicated (use prio_tree on anon_vma?), but there's one very simple thing we can do to speed up the common case: if a page to be munlocked is mapped only once, then it is our vma that it is mapped into, and there's no need whatever to walk through all the others. Okay, there is a very remote race in munlock_vma_pages_range(), if between its follow_page() and lock_page(), another process were to munlock the same page, then page reclaim remove it from our vma, then another process mlock it again. We would find it with page_mapcount 1, yet it's still mlocked in another process. But never mind, that's much less likely than the down_read_trylock() failure which munlocking already tolerates (in try_to_unmap_one()): in due course page reclaim will discover and move the page to unevictable instead. [akpm@linux-foundation.org: add comment] Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: do not drain pagevecs for mlockall(MCL_FUTURE)Christoph Lameter2011-10-31
| | | | | | | | | | | | | | MCL_FUTURE does not move pages between lru list and draining the LRU per cpu pagevecs is a nasty activity. Avoid doing it unecessarily. Signed-off-by: Christoph Lameter <cl@gentwo.org> Cc: David Rientjes <rientjes@google.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Acked-by: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: don't access vm_flags as 'int'KOSAKI Motohiro2011-05-26
| | | | | | | | | | | The type of vma->vm_flags is 'unsigned long'. Neither 'int' nor 'unsigned int'. This patch fixes such misuse. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> [ Changed to use a typedef - we'll extend it to cover more cases later, since there has been discussion about making it a 64-bit type.. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* VM: skip the stack guard page lookup in get_user_pages only for mlockLinus Torvalds2011-05-05
| | | | | | | | | | | | | | | | | | | | | | | The logic in __get_user_pages() used to skip the stack guard page lookup whenever the caller wasn't interested in seeing what the actual page was. But Michel Lespinasse points out that there are cases where we don't care about the physical page itself (so 'pages' may be NULL), but do want to make sure a page is mapped into the virtual address space. So using the existence of the "pages" array as an indication of whether to look up the guard page or not isn't actually so great, and we really should just use the FOLL_MLOCK bit. But because that bit was only set for the VM_LOCKED case (and not all vma's necessarily have it, even for mlock()), we couldn't do that originally. Fix that by moving the VM_LOCKED check deeper into the call-chain, which actually simplifies many things. Now mlock() gets simpler, and we can also check for FOLL_MLOCK in __get_user_pages() and the code ends up much more straightforward. Reported-and-reviewed-by: Michel Lespinasse <walken@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* vm: fix mlock() on stack guard pageLinus Torvalds2011-04-12
| | | | | | | | | | | | | | | | | | | | | | | | Commit 53a7706d5ed8 ("mlock: do not hold mmap_sem for extended periods of time") changed mlock() to care about the exact number of pages that __get_user_pages() had brought it. Before, it would only care about errors. And that doesn't work, because we also handled one page specially in __mlock_vma_pages_range(), namely the stack guard page. So when that case was handled, the number of pages that the function returned was off by one. In particular, it could be zero, and then the caller would end up not making any progress at all. Rather than try to fix up that off-by-one error for the mlock case specially, this just moves the logic to handle the stack guard page into__get_user_pages() itself, thus making all the counts come out right automatically. Reported-by: Robert Święcki <robert@swiecki.net> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: arch: make get_gate_vma take an mm_struct instead of a task_structStephen Wilson2011-03-23
| | | | | | | | | | | | | Morally, the presence of a gate vma is more an attribute of a particular mm than a particular task. Moreover, dropping the dependency on task_struct will help make both existing and future operations on mm's more flexible and convenient. Signed-off-by: Stephen Wilson <wilsons@start.ca> Reviewed-by: Michel Lespinasse <walken@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* mlock: operate on any regions with protection != PROT_NONEMichel Lespinasse2011-02-01
| | | | | | | | | | | | | | | | As Tao Ma noticed, change 5ecfda0 breaks blktrace. This is because blktrace mmaps a file with PROT_WRITE permissions but without PROT_READ, so my attempt to not unnecessarity break COW during mlock ended up causing mlock to fail with a permission problem. I am proposing to let mlock ignore vma protection in all cases except PROT_NONE. In particular, mlock should not fail for PROT_WRITE regions (as in the blktrace case, which broke at 5ecfda0) or for PROT_EXEC regions (which seem to me like they were always broken). Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mlock: do not hold mmap_sem for extended periods of timeMichel Lespinasse2011-01-13
| | | | | | | | | | | | | | | | | | | | | __get_user_pages gets a new 'nonblocking' parameter to signal that the caller is prepared to re-acquire mmap_sem and retry the operation if needed. This is used to split off long operations if they are going to block on a disk transfer, or when we detect contention on the mmap_sem. [akpm@linux-foundation.org: remove ref to rwsem_is_contended()] Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: move VM_LOCKED check to __mlock_vma_pages_range()Michel Lespinasse2011-01-13
| | | | | | | | | | | | | | | | | | | | | Use a single code path for faulting in pages during mlock. The reason to have it in this patch series is that I did not want to update both code paths in a later change that releases mmap_sem when blocking on disk. Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: add FOLL_MLOCK follow_page flag.Michel Lespinasse2011-01-13
| | | | | | | | | | | | | | | | | | | | | | | | | | Move the code to mlock pages from __mlock_vma_pages_range() to follow_page(). This allows __mlock_vma_pages_range() to not have to break down work into 16-page batches. An additional motivation for doing this within the present patch series is that it'll make it easier for a later chagne to drop mmap_sem when blocking on disk (we'd like to be able to resume at the page that was read from disk instead of at the start of a 16-page batch). Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mlock: only hold mmap_sem in shared mode when faulting in pagesMichel Lespinasse2011-01-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently mlock() holds mmap_sem in exclusive mode while the pages get faulted in. In the case of a large mlock, this can potentially take a very long time, during which various commands such as 'ps auxw' will block. This makes sysadmins unhappy: real 14m36.232s user 0m0.003s sys 0m0.015s (output from 'time ps auxw' while a 20GB file was being mlocked without being previously preloaded into page cache) I propose that mlock() could release mmap_sem after the VM_LOCKED bits have been set in all appropriate VMAs. Then a second pass could be done to actually mlock the pages, in small batches, releasing mmap_sem when we block on disk access or when we detect some contention. This patch: Before this change, mlock() holds mmap_sem in exclusive mode while the pages get faulted in. In the case of a large mlock, this can potentially take a very long time. Various things will block while mmap_sem is held, including 'ps auxw'. This can make sysadmins angry. I propose that mlock() could release mmap_sem after the VM_LOCKED bits have been set in all appropriate VMAs. Then a second pass could be done to actually mlock the pages with mmap_sem held for reads only. We need to recheck the vma flags after we re-acquire mmap_sem, but this is easy. In the case where a vma has been munlocked before mlock completes, pages that were already marked as PageMlocked() are handled by the munlock() call, and mlock() is careful to not mark new page batches as PageMlocked() after the munlock() call has cleared the VM_LOCKED vma flags. So, the end result will be identical to what'd happen if munlock() had executed after the mlock() call. In a later change, I will allow the second pass to release mmap_sem when blocking on disk accesses or when it is otherwise contended, so that it won't be held for long periods of time even in shared mode. Signed-off-by: Michel Lespinasse <walken@google.com> Tested-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mlock: avoid dirtying pages and triggering writebackMichel Lespinasse2011-01-13
| | | | | | | | | | | | | | | | | | | | | | | When faulting in pages for mlock(), we want to break COW for anonymous or file pages within VM_WRITABLE, non-VM_SHARED vmas. However, there is no need to write-fault into VM_SHARED vmas since shared file pages can be mlocked first and dirtied later, when/if they actually get written to. Skipping the write fault is desirable, as we don't want to unnecessarily cause these pages to be dirtied and queued for writeback. Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Theodore Tso <tytso@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: Move vma_stack_continue into mm.hStefan Bader2010-09-09
| | | | | | | So it can be used by all that need to check for that. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: make the mlock() stack guard page checks stricterLinus Torvalds2010-08-21
| | | | | | | | If we've split the stack vma, only the lowest one has the guard page. Now that we have a doubly linked list of vma's, checking this is trivial. Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: fix up some user-visible effects of the stack guard pageLinus Torvalds2010-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit makes the stack guard page somewhat less visible to user space. It does this by: - not showing the guard page in /proc/<pid>/maps It looks like lvm-tools will actually read /proc/self/maps to figure out where all its mappings are, and effectively do a specialized "mlockall()" in user space. By not showing the guard page as part of the mapping (by just adding PAGE_SIZE to the start for grows-up pages), lvm-tools ends up not being aware of it. - by also teaching the _real_ mlock() functionality not to try to lock the guard page. That would just expand the mapping down to create a new guard page, so there really is no point in trying to lock it in place. It would perhaps be nice to show the guard page specially in /proc/<pid>/maps (or at least mark grow-down segments some way), but let's not open ourselves up to more breakage by user space from programs that depends on the exact deails of the 'maps' file. Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools source code to see what was going on with the whole new warning. Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be Reported-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86, perf, bts, mm: Delete the never used BTS-ptrace codePeter Zijlstra2010-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | Support for the PMU's BTS features has been upstreamed in v2.6.32, but we still have the old and disabled ptrace-BTS, as Linus noticed it not so long ago. It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without regard for other uses (perf) and doesn't provide the flexibility needed for perf either. Its users are ptrace-block-step and ptrace-bts, since ptrace-bts was never used and ptrace-block-step can be implemented using a much simpler approach. So axe all 3000 lines of it. That includes the *locked_memory*() APIs in mm/mlock.c as well. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Markus Metzger <markus.t.metzger@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <20100325135413.938004390@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* mm: use rlimit helpersJiri Slaby2010-03-06
| | | | | | | | | | | | | Make sure compiler won't do weird things with limits. E.g. fetching them twice may return 2 different values after writable limits are implemented. I.e. either use rlimit helpers added in 3e10e716abf3c71bdb5d86b8f507f9e72236c9cd ("resource: add helpers for fetching rlimits") or ACCESS_ONCE if not applicable. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mlock: replace stale comments in munlock_vma_page()Lee Schermerhorn2009-12-15
| | | | | | | | | | Cleanup stale comments on munlock_vma_page(). Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ksm: fix mlockfreed to munlockedHugh Dickins2009-12-15
| | | | | | | | | | | | | | | | | When KSM merges an mlocked page, it has been forgetting to munlock it: that's been left to free_page_mlock(), which reports it in /proc/vmstat as unevictable_pgs_mlockfreed instead of unevictable_pgs_munlocked (and whinges "Page flag mlocked set for process" in mmotm, whereas mainline is silently forgiving). Call munlock_vma_page() to fix that. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: mlocking in try_to_unmap_oneHugh Dickins2009-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's contorted mlock/munlock handling in try_to_unmap_anon() and try_to_unmap_file(), which we'd prefer not to repeat for KSM swapping. Simplify it by moving it all down into try_to_unmap_one(). One thing is then lost, try_to_munlock()'s distinction between when no vma holds the page mlocked, and when a vma does mlock it, but we could not get mmap_sem to set the page flag. But its only caller takes no interest in that distinction (and is better testing SWAP_MLOCK anyway), so let's keep the code simple and return SWAP_AGAIN for both cases. try_to_unmap_file()'s TTU_MUNLOCK nonlinear handling was particularly amusing: once unravelled, it turns out to have been choosing between two different ways of doing the same nothing. Ah, no, one way was actually returning SWAP_FAIL when it meant to return SWAP_SUCCESS. [kosaki.motohiro@jp.fujitsu.com: comment adding to mlocking in try_to_unmap_one] [akpm@linux-foundation.org: remove test of MLOCK_PAGES] Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: m(un)lock avoid ZERO_PAGEHugh Dickins2009-09-22
| | | | | | | | | | | | | | | | | | | | | | | | I'm still reluctant to clutter __get_user_pages() with another flag, just to avoid touching ZERO_PAGE count in mlock(); though we can add that later if it shows up as an issue in practice. But when mlocking, we can test page->mapping slightly earlier, to avoid the potentially bouncy rescheduling of lock_page on ZERO_PAGE - mlock didn't lock_page in olden ZERO_PAGE days, so we might have regressed. And when munlocking, it turns out that FOLL_DUMP coincidentally does what's needed to avoid all updates to ZERO_PAGE, so use that here also. Plus add comment suggested by KAMEZAWA Hiroyuki. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: FOLL flags for GUP flagsHugh Dickins2009-09-22
| | | | | | | | | | | | | | | | | | | | | | __get_user_pages() has been taking its own GUP flags, then processing them into FOLL flags for follow_page(). Though oddly named, the FOLL flags are more widely used, so pass them to __get_user_pages() now. Sorry, VM flags, VM_FAULT flags and FAULT_FLAGs are still distinct. (The patch to __get_user_pages() looks peculiar, with both gup_flags and foll_flags: the gup_flags remain constant; but as before there's an exceptional case, out of scope of the patch, in which foll_flags per page have FOLL_WRITE masked off.) Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: munlock use follow_pageHugh Dickins2009-09-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hiroaki Wakabayashi points out that when mlock() has been interrupted by SIGKILL, the subsequent munlock() takes unnecessarily long because its use of __get_user_pages() insists on faulting in all the pages which mlock() never reached. It's worse than slowness if mlock() is terminated by Out Of Memory kill: the munlock_vma_pages_all() in exit_mmap() insists on faulting in all the pages which mlock() could not find memory for; so innocent bystanders are killed too, and perhaps the system hangs. __get_user_pages() does a lot that's silly for munlock(): so remove the munlock option from __mlock_vma_pages_range(), and use a simple loop of follow_page()s in munlock_vma_pages_range() instead; ignoring absent pages, and not marking present pages as accessed or dirty. (Change munlock() to only go so far as mlock() reached? That does not work out, given the convention that mlock() claims complete success even when it has to give up early - in part so that an underlying file can be extended later, and those pages locked which earlier would give SIGBUS.) Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: <stable@kernel.org> Acked-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Hiroaki Wakabayashi <primulaelatior@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: remove CONFIG_UNEVICTABLE_LRU config optionKOSAKI Motohiro2009-06-16
| | | | | | | | | | | | | | | | Currently, nobody wants to turn UNEVICTABLE_LRU off. Thus this configurability is unnecessary. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Andi Kleen <andi@firstfloor.org> Acked-by: Minchan Kim <minchan.kim@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Rik van Riel <riel@redhat.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86, bts, mm: clean up buffer allocationMarkus Metzger2009-04-24
| | | | | | | | | | | | | | | | The current mm interface is asymetric. One function allocates a locked buffer, another function only refunds the memory. Change this to have two functions for accounting and refunding locked memory, respectively; and do the actual buffer allocation in ptrace. [ Impact: refactor BTS buffer allocation code ] Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090424095143.A30265@sedona.ch.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* mm, x86, ptrace, bts: defer branch trace stopping, remove dead codeIngo Molnar2009-04-08
| | | | | | Remove the unused free_locked_buffer() API. Signed-off-by: Ingo Molnar <mingo@elte.hu>
* mm, x86, ptrace, bts: defer branch trace stoppingMarkus Metzger2009-04-07
| | | | | | | | | | | | | | | | | | | | | When a ptraced task is unlinked, we need to stop branch tracing for that task. Since the unlink is called with interrupts disabled, and we need interrupts enabled to stop branch tracing, we defer the work. Collect all branch tracing related stuff in a branch tracing context. Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: roland@redhat.com Cc: eranian@googlemail.com Cc: juan.villacis@intel.com Cc: ak@linux.jf.intel.com LKML-Reference: <20090403144550.712401000@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2009-02-17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, vm86: fix preemption bug x86, olpc: fix model detection without OFW x86, hpet: fix for LS21 + HPET = boot hang x86: CPA avoid repeated lazy mmu flush x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible context x86/paravirt: make arch_flush_lazy_mmu/cpu disable preemption x86, pat: fix warn_on_once() while mapping 0-1MB range with /dev/mem x86/cpa: make sure cpa is safe to call in lazy mmu mode x86, ptrace, mm: fix double-free on race
| * x86, ptrace, mm: fix double-free on raceMarkus Metzger2009-02-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ptrace_detach() races with __ptrace_unlink() if the traced task is reaped while detaching. This might cause a double-free of the BTS buffer. Change the ptrace_detach() path to only do the memory accounting in ptrace_bts_detach() and leave the buffer free to ptrace_bts_untrace() which will be called from __ptrace_unlink(). The fix follows a proposal from Oleg Nesterov. Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | mm: fix error case in mlock downgrade reversionHugh Dickins2009-02-08
|/ | | | | | | | | | | | | | Commit 27421e211a39784694b597dbf35848b88363c248, Manually revert "mlock: downgrade mmap sem while populating mlocked regions", has introduced its own regression: __mlock_vma_pages_range() may report an error (for example, -EFAULT from trying to lock down pages from beyond EOF), but mlock_vma_pages_range() must hide that from its callers as before. Reported-by: Sami Farin <safari-kernel@safari.iki.fi> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Manually revert "mlock: downgrade mmap sem while populating mlocked regions"Linus Torvalds2009-02-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This essentially reverts commit 8edb08caf68184fb170f4f69c7445929e199eaea. It downgraded our mmap semaphore to a read-lock while mlocking pages, in order to allow other threads (and external accesses like "ps" et al) to walk the vma lists and take page faults etc. Which is a nice idea, but the implementation does not work. Because we cannot upgrade the lock back to a write lock without releasing the mmap semaphore, the code had to release the lock entirely and then re-take it as a writelock. However, that meant that the caller possibly lost the vma chain that it was following, since now another thread could come in and mmap/munmap the range. The code tried to work around that by just looking up the vma again and erroring out if that happened, but quite frankly, that was just a buggy hack that doesn't actually protect against anything (the other thread could just have replaced the vma with another one instead of totally unmapping it). The only way to downgrade to a read map _reliably_ is to do it at the end, which is likely the right thing to do: do all the 'vma' operations with the write-lock held, then downgrade to a read after completing them all, and then do the "populate the newly mlocked regions" while holding just the read lock. And then just drop the read-lock and return to user space. The (perhaps somewhat simpler) alternative is to just make all the callers of mlock_vma_pages_range() know that the mmap lock got dropped, and just re-grab the mmap semaphore if it needs to mlock more than one vma region. So we can do this "downgrade mmap sem while populating mlocked regions" thing right, but the way it was done here was absolutely not correct. Thus the revert, in the expectation that we will do it all correctly some day. Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [CVE-2009-0029] System call wrappers part 14Heiko Carstens2009-01-14
| | | | Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
* [CVE-2009-0029] System call wrappers part 13Heiko Carstens2009-01-14
| | | | Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
* mm: make get_user_pages() interruptibleYing Han2009-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The initial implementation of checking TIF_MEMDIE covers the cases of OOM killing. If the process has been OOM killed, the TIF_MEMDIE is set and it return immediately. This patch includes: 1. add the case that the SIGKILL is sent by user processes. The process can try to get_user_pages() unlimited memory even if a user process has sent a SIGKILL to it(maybe a monitor find the process exceed its memory limit and try to kill it). In the old implementation, the SIGKILL won't be handled until the get_user_pages() returns. 2. change the return value to be ERESTARTSYS. It makes no sense to return ENOMEM if the get_user_pages returned by getting a SIGKILL signal. Considering the general convention for a system call interrupted by a signal is ERESTARTNOSYS, so the current return value is consistant to that. Lee: An unfortunate side effect of "make-get_user_pages-interruptible" is that it prevents a SIGKILL'd task from munlock-ing pages that it had mlocked, resulting in freeing of mlocked pages. Freeing of mlocked pages, in itself, is not so bad. We just count them now--altho' I had hoped to remove this stat and add PG_MLOCKED to the free pages flags check. However, consider pages in shared libraries mapped by more than one task that a task mlocked--e.g., via mlockall(). If the task that mlocked the pages exits via SIGKILL, these pages would be left mlocked and unevictable. Proposed fix: Add another GUP flag to ignore sigkill when calling get_user_pages from munlock()--similar to Kosaki Motohiro's 'IGNORE_VMA_PERMISSIONS flag for the same purpose. We are not actually allocating memory in this case, which "make-get_user_pages-interruptible" intends to avoid. We're just munlocking pages that are already resident and mapped, and we're reusing get_user_pages() to access those pages. ?? Maybe we should combine 'IGNORE_VMA_PERMISSIONS and '_IGNORE_SIGKILL into a single flag: GUP_FLAGS_MUNLOCK ??? [Lee.Schermerhorn@hp.com: ignore sigkill in get_user_pages during munlock] Signed-off-by: Paul Menage <menage@google.com> Signed-off-by: Ying Han <yinghan@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Hugh Dickins <hugh@veritas.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rohit Seth <rohitseth@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86, bts: memory accountingMarkus Metzger2008-12-20
| | | | | | | | | | | | Impact: move the BTS buffer accounting to the mlock bucket Add alloc_locked_buffer() and free_locked_buffer() functions to mm/mlock.c to kalloc a buffer and account the locked memory to current. Account the memory for the BTS buffer to the tracer. Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* unitialized return value in mm/mlock.c: __mlock_vma_pages_range()Helge Deller2008-11-16
| | | | | | | | | | | | | Fix an unitialized return value when compiling on parisc (with CONFIG_UNEVICTABLE_LRU=y): mm/mlock.c: In function `__mlock_vma_pages_range': mm/mlock.c:165: warning: `ret' might be used uninitialized in this function Signed-off-by: Helge Deller <deller@gmx.de> [ It isn't ever really used uninitialized, since no caller should ever call this function with an empty range. But the compiler is correct that from a local analysis standpoint that is impossible to see, and fixing the warning is appropriate. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: remove lru_add_drain_all() from the munlock pathKOSAKI Motohiro2008-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lockdep warns about following message at boot time on one of my test machine. Then, schedule_on_each_cpu() sholdn't be called when the task have mmap_sem. Actually, lru_add_drain_all() exist to prevent the unevictalble pages stay on reclaimable lru list. but currenct unevictable code can rescue unevictable pages although it stay on reclaimable list. So removing is better. In addition, this patch add lru_add_drain_all() to sys_mlock() and sys_mlockall(). it isn't must. but it reduce the failure of moving to unevictable list. its failure can rescue in vmscan later. but reducing is better. Note, if above rescuing happend, the Mlocked and the Unevictable field mismatching happend in /proc/meminfo. but it doesn't cause any real trouble. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.28-rc2-mm1 #2 ------------------------------------------------------- lvm/1103 is trying to acquire lock: (&cpu_hotplug.lock){--..}, at: [<c0130789>] get_online_cpus+0x29/0x50 but task is already holding lock: (&mm->mmap_sem){----}, at: [<c01878ae>] sys_mlockall+0x4e/0xb0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_sem){----}: [<c0153da2>] check_noncircular+0x82/0x110 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0156161>] validate_chain+0xb11/0x1070 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 (*) grab mmap_sem [<c0185e6a>] might_fault+0x4a/0xa0 [<c0185e9b>] might_fault+0x7b/0xa0 [<c0185e6a>] might_fault+0x4a/0xa0 [<c0294dd0>] copy_to_user+0x30/0x60 [<c01ae3ec>] filldir+0x7c/0xd0 [<c01e3a6a>] sysfs_readdir+0x11a/0x1f0 (*) grab sysfs_mutex [<c01ae370>] filldir+0x0/0xd0 [<c01ae370>] filldir+0x0/0xd0 [<c01ae4c6>] vfs_readdir+0x86/0xa0 (*) grab i_mutex [<c01ae75b>] sys_getdents+0x6b/0xc0 [<c010355a>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff -> #2 (sysfs_mutex){--..}: [<c0153da2>] check_noncircular+0x82/0x110 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c0156161>] validate_chain+0xb11/0x1070 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 (*) grab sysfs_mutex [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e3d2c>] sysfs_addrm_start+0x2c/0xc0 [<c01e422f>] create_dir+0x3f/0x90 [<c01e42a9>] sysfs_create_dir+0x29/0x50 [<c04faaf5>] _spin_unlock+0x25/0x40 [<c028f21d>] kobject_add_internal+0xcd/0x1a0 [<c028f37a>] kobject_set_name_vargs+0x3a/0x50 [<c028f41d>] kobject_init_and_add+0x2d/0x40 [<c019d4d2>] sysfs_slab_add+0xd2/0x180 [<c019d580>] sysfs_add_func+0x0/0x70 [<c019d5dc>] sysfs_add_func+0x5c/0x70 (*) grab slub_lock [<c01400f2>] run_workqueue+0x172/0x200 [<c014008f>] run_workqueue+0x10f/0x200 [<c0140bd0>] worker_thread+0x0/0xf0 [<c0140c6c>] worker_thread+0x9c/0xf0 [<c0143c80>] autoremove_wake_function+0x0/0x50 [<c0140bd0>] worker_thread+0x0/0xf0 [<c0143972>] kthread+0x42/0x70 [<c0143930>] kthread+0x0/0x70 [<c01042db>] kernel_thread_helper+0x7/0x1c [<ffffffff>] 0xffffffff -> #1 (slub_lock){----}: [<c0153d2d>] check_noncircular+0xd/0x110 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c0156161>] validate_chain+0xb11/0x1070 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c015433d>] mark_lock+0x35d/0xd00 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c04f93a3>] down_read+0x43/0x80 [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 (*) grab slub_lock [<c04f650f>] slab_cpuup_callback+0x11f/0x1d0 [<c04fd9ac>] notifier_call_chain+0x3c/0x70 [<c04f5454>] _cpu_up+0x84/0x110 [<c04f552b>] cpu_up+0x4b/0x70 (*) grab cpu_hotplug.lock [<c06d1530>] kernel_init+0x0/0x170 [<c06d15e5>] kernel_init+0xb5/0x170 [<c06d1530>] kernel_init+0x0/0x170 [<c01042db>] kernel_thread_helper+0x7/0x1c [<ffffffff>] 0xffffffff -> #0 (&cpu_hotplug.lock){--..}: [<c0155bff>] validate_chain+0x5af/0x1070 [<c040f7e0>] dev_status+0x0/0x50 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c0130789>] get_online_cpus+0x29/0x50 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c0130789>] get_online_cpus+0x29/0x50 [<c0130789>] get_online_cpus+0x29/0x50 [<c017bc30>] lru_add_drain_per_cpu+0x0/0x10 [<c0130789>] get_online_cpus+0x29/0x50 (*) grab cpu_hotplug.lock [<c0140cf2>] schedule_on_each_cpu+0x32/0xe0 [<c0187095>] __mlock_vma_pages_range+0x85/0x2c0 [<c0156945>] __lock_acquire+0x285/0xa10 [<c0188f09>] vma_merge+0xa9/0x1d0 [<c0187450>] mlock_fixup+0x180/0x200 [<c0187548>] do_mlockall+0x78/0x90 (*) grab mmap_sem [<c01878e1>] sys_mlockall+0x81/0xb0 [<c010355a>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff other info that might help us debug this: 1 lock held by lvm/1103: #0: (&mm->mmap_sem){----}, at: [<c01878ae>] sys_mlockall+0x4e/0xb0 stack backtrace: Pid: 1103, comm: lvm Not tainted 2.6.28-rc2-mm1 #2 Call Trace: [<c01555fc>] print_circular_bug_tail+0x7c/0xd0 [<c0155bff>] validate_chain+0x5af/0x1070 [<c040f7e0>] dev_status+0x0/0x50 [<c0156923>] __lock_acquire+0x263/0xa10 [<c015714c>] lock_acquire+0x7c/0xb0 [<c0130789>] get_online_cpus+0x29/0x50 [<c04f8b55>] mutex_lock_nested+0xa5/0x2f0 [<c0130789>] get_online_cpus+0x29/0x50 [<c0130789>] get_online_cpus+0x29/0x50 [<c017bc30>] lru_add_drain_per_cpu+0x0/0x10 [<c0130789>] get_online_cpus+0x29/0x50 [<c0140cf2>] schedule_on_each_cpu+0x32/0xe0 [<c0187095>] __mlock_vma_pages_range+0x85/0x2c0 [<c0156945>] __lock_acquire+0x285/0xa10 [<c0188f09>] vma_merge+0xa9/0x1d0 [<c0187450>] mlock_fixup+0x180/0x200 [<c0187548>] do_mlockall+0x78/0x90 [<c01878e1>] sys_mlockall+0x81/0xb0 [<c010355a>] syscall_call+0x7/0xb Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mlock: make mlock error return Posixly CorrectLee Schermerhorn2008-10-20
| | | | | | | | | | | | | | | | | | | | Rework Posix error return for mlock(). Posix requires error code for mlock*() system calls for some conditions that differ from what kernel low level functions, such as get_user_pages(), return for those conditions. For more info, see: http://marc.info/?l=linux-kernel&m=121750892930775&w=2 This patch provides the same translation of get_user_pages() error codes to posix specified error codes in the context of the mlock rework for unevictable lru. [akpm@linux-foundation.org: fix build] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* vmstat: mlocked pages statisticsNick Piggin2008-10-20
| | | | | | | | | | | | | | | | | Add NR_MLOCK zone page state, which provides a (conservative) count of mlocked pages (actually, the number of mlocked pages moved off the LRU). Reworked by lts to fit in with the modified mlock page support in the Reclaim Scalability series. [kosaki.motohiro@jp.fujitsu.com: fix incorrect Mlocked field of /proc/meminfo] [lee.schermerhorn@hp.com: mlocked-pages: add event counting with statistics] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mmap: handle mlocked pages during map, remap, unmapRik van Riel2008-10-20
| | | | | | | | | | | | | | | | | | | | | | Originally by Nick Piggin <npiggin@suse.de> Remove mlocked pages from the LRU using "unevictable infrastructure" during mmap(), munmap(), mremap() and truncate(). Try to move back to normal LRU lists on munmap() when last mlocked mapping removed. Remove PageMlocked() status when page truncated from file. [akpm@linux-foundation.org: cleanup] [kamezawa.hiroyu@jp.fujitsu.com: fix double unlock_page()] [kosaki.motohiro@jp.fujitsu.com: split LRU: munlock rework] [lee.schermerhorn@hp.com: mlock: fix __mlock_vma_pages_range comment block] [akpm@linux-foundation.org: remove bogus kerneldoc token] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamewzawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mlock: downgrade mmap sem while populating mlocked regionsLee Schermerhorn2008-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to hold the mmap_sem for write to initiatate mlock()/munlock() because we may need to merge/split vmas. However, this can lead to very long lock hold times attempting to fault in a large memory region to mlock it into memory. This can hold off other faults against the mm [multithreaded tasks] and other scans of the mm, such as via /proc. To alleviate this, downgrade the mmap_sem to read mode during the population of the region for locking. This is especially the case if we need to reclaim memory to lock down the region. We [probably?] don't need to do this for unlocking as all of the pages should be resident--they're already mlocked. Now, the caller's of the mlock functions [mlock_fixup() and mlock_vma_pages_range()] expect the mmap_sem to be returned in write mode. Changing all callers appears to be way too much effort at this point. So, restore write mode before returning. Note that this opens a window where the mmap list could change in a multithreaded process. So, at least for mlock_fixup(), where we could be called in a loop over multiple vmas, we check that a vma still exists at the start address and that vma still covers the page range [start,end). If not, we return an error, -EAGAIN, and let the caller deal with it. Return -EAGAIN from mlock_vma_pages_range() function and mlock_fixup() if the vma at 'start' disappears or changes so that the page range [start,end) is no longer contained in the vma. Again, let the caller deal with it. Looks like only sys_remap_file_pages() [via mmap_region()] should actually care. With this patch, I no longer see processes like ps(1) blocked for seconds or minutes at a time waiting for a large [multiple gigabyte] region to be locked down. However, I occassionally see delays while unlocking or unmapping a large mlocked region. Should we also downgrade the mmap_sem for the unlock path? Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mlock: mlocked pages are unevictableNick Piggin2008-10-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mlock() fix return valuesKOSAKI Motohiro2008-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Halesh says: Please find the below testcase provide to test mlock. Test Case : =========================== #include <sys/resource.h> #include <stdio.h> #include <sys/stat.h> #include <sys/types.h> #include <unistd.h> #include <sys/mman.h> #include <fcntl.h> #include <errno.h> #include <stdlib.h> int main(void) { int fd,ret, i = 0; char *addr, *addr1 = NULL; unsigned int page_size; struct rlimit rlim; if (0 != geteuid()) { printf("Execute this pgm as root\n"); exit(1); } /* create a file */ if ((fd = open("mmap_test.c",O_RDWR|O_CREAT,0755)) == -1) { printf("cant create test file\n"); exit(1); } page_size = sysconf(_SC_PAGE_SIZE); /* set the MEMLOCK limit */ rlim.rlim_cur = 2000; rlim.rlim_max = 2000; if ((ret = setrlimit(RLIMIT_MEMLOCK,&rlim)) != 0) { printf("Cant change limit values\n"); exit(1); } addr = 0; while (1) { /* map a page into memory each time*/ if ((addr = (char *) mmap(addr,page_size, PROT_READ | PROT_WRITE,MAP_SHARED,fd,0)) == MAP_FAILED) { printf("cant do mmap on file\n"); exit(1); } if (0 == i) addr1 = addr; i++; errno = 0; /* lock the mapped memory pagewise*/ if ((ret = mlock((char *)addr, 1500)) == -1) { printf("errno value is %d\n", errno); printf("cant lock maped region\n"); exit(1); } addr = addr + page_size; } } ====================================================== This testcase results in an mlock() failure with errno 14 that is EFAULT, but it has nowhere been specified that mlock() will return EFAULT. When I tested the same on older kernels like 2.6.18, I got the correct result i.e errno 12 (ENOMEM). I think in source code mlock(2), setting errno ENOMEM has been missed in do_mlock() , on mlock_fixup() failure. SUSv3 requires the following behavior frmo mlock(2). [ENOMEM] Some or all of the address range specified by the addr and len arguments does not correspond to valid mapped pages in the address space of the process. [EAGAIN] Some or all of the memory identified by the operation could not be locked when the call was made. This rule isn't so nice and slighly strange. but many people think POSIX/SUS compliance is important. Reported-by: Halesh Sadashiv <halesh.sadashiv@ap.sony.com> Tested-by: Halesh Sadashiv <halesh.sadashiv@ap.sony.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* do not limit locked memory when RLIMIT_MEMLOCK is RLIM_INFINITYHerbert van den Bergh2007-07-16
| | | | | | | | | | | | | Fix a bug in mm/mlock.c on 32-bit architectures that prevents a user from locking more than 4GB of shared memory, or allocating more than 4GB of shared memory in hugepages, when rlim[RLIMIT_MEMLOCK] is set to RLIM_INFINITY. Signed-off-by: Herbert van den Bergh <herbert.van.den.bergh@oracle.com> Acked-by: Chris Mason <chris.mason@oracle.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Detach sched.h from mm.hAlexey Dobriyan2007-05-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] mlock cleanupRik Bobbaers2006-12-07
| | | | | | | | mm is defined as vma->vm_mm, so use that. Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] move capable() to capability.hRandy.Dunlap2006-01-11
| | | | | | | | | | | | | - Move capable() from sched.h to capability.h; - Use <linux/capability.h> where capable() is used (in include/, block/, ipc/, kernel/, a few drivers/, mm/, security/, & sound/; many more drivers/ to go) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-16
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!