aboutsummaryrefslogtreecommitdiffstats
path: root/kernel/time
Commit message (Collapse)AuthorAge
* ntp: handle leap second via timerRoman Zippel2008-05-01
| | | | | | | | | | | | | | Remove the leap second handling from second_overflow(), which doesn't have to check for it every second anymore. With CONFIG_NO_HZ this also makes sure the leap second is handled close to the full second. Additionally this makes it possible to abort a leap second properly by resetting the STA_INS/STA_DEL status bits. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ntp: remove current_tick_length()Roman Zippel2008-05-01
| | | | | | | | | | | | current_tick_length used to do a little more, but now it just returns tick_length, which we can also access directly at the few places, where it's needed. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ntp: rename TICK_LENGTH_SHIFT to NTP_SCALE_SHIFTRoman Zippel2008-05-01
| | | | | | | | | | | As TICK_LENGTH_SHIFT is used for more than just the tick length, the name isn't quite approriate anymore, so this renames it to NTP_SCALE_SHIFT. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ntp: support for TAIRoman Zippel2008-05-01
| | | | | | | | | | | | This adds support for setting the TAI value (International Atomic Time). The value is reported back to userspace via timex (as we don't have a ntp_gettime() syscall). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ntp: increase time_offset resolutionRoman Zippel2008-05-01
| | | | | | | | | | | | | | time_offset is already a 64bit value but its resolution barely used, so this makes better use of it by replacing SHIFT_UPDATE with TICK_LENGTH_SHIFT. Side note: the SHIFT_HZ in SHIFT_UPDATE was incorrect for CONFIG_NO_HZ and the primary reason for changing time_offset to 64bit to avoid the overflow. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ntp: increase time_freq resolutionRoman Zippel2008-05-01
| | | | | | | | | | | | | | This changes time_freq to a 64bit value and makes it static (the only outside user had no real need to modify it). Intermediate values were already 64bit, so the change isn't that big, but it saves a little in shifts by replacing SHIFT_NSEC with TICK_LENGTH_SHIFT. PPM_SCALE is then used to convert between user space and kernel space representation. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ntp: NTP4 user space bits updateRoman Zippel2008-05-01
| | | | | | | | | | | | | | | | | This adds a few more things from the ntp nanokernel related to user space. It's now possible to select the resolution used of some values via STA_NANO and the kernel reports in which mode it works (pll/fll). If some values for adjtimex() are outside the acceptable range, they are now simply normalized instead of letting the syscall fail. I removed MOD_CLKA/MOD_CLKB as the mapping didn't really makes any sense, the kernel doesn't support setting the clock. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ntp: cleanup ntp.cRoman Zippel2008-05-01
| | | | | | | | | | | This is mostly a style cleanup of ntp.c and extracts part of do_adjtimex as ntp_update_offset(). Otherwise the functionality is still the same as before. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* remove div_long_long_remRoman Zippel2008-05-01
| | | | | | | | | | | | | | | | | | | | | | x86 is the only arch right now, which provides an optimized for div_long_long_rem and it has the downside that one has to be very careful that the divide doesn't overflow. The API is a little akward, as the arguments for the unsigned divide are signed. The signed version also doesn't handle a negative divisor and produces worse code on 64bit archs. There is little incentive to keep this API alive, so this converts the few users to the new API. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* convert a few do_div usersRoman Zippel2008-05-01
| | | | | | | | | | | This converts a few users of do_div to div_[su]64 and this demonstrates nicely how it can reduce some expressions to one-liners. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* kernel: use non-racy method for proc entries creationDenis V. Lunev2008-04-29
| | | | | | | | | | | | Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* softlockup: fix NOHZ wakeupIngo Molnar2008-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | David Miller reported: |---------------> the following commit: | commit 27ec4407790d075c325e1f4da0a19c56953cce23 | Author: Ingo Molnar <mingo@elte.hu> | Date: Thu Feb 28 21:00:21 2008 +0100 | | sched: make cpu_clock() globally synchronous | | Alexey Zaytsev reported (and bisected) that the introduction of | cpu_clock() in printk made the timestamps jump back and forth. | | Make cpu_clock() more reliable while still keeping it fast when it's | called frequently. | | Signed-off-by: Ingo Molnar <mingo@elte.hu> causes watchdog triggers when a cpu exits NOHZ state when it has been there for >= the soft lockup threshold, for example here are some messages from a 128 cpu Niagara2 box: [ 168.106406] BUG: soft lockup - CPU#11 stuck for 128s! [dd:3239] [ 168.989592] BUG: soft lockup - CPU#21 stuck for 86s! [swapper:0] [ 168.999587] BUG: soft lockup - CPU#29 stuck for 91s! [make:4511] [ 168.999615] BUG: soft lockup - CPU#2 stuck for 85s! [swapper:0] [ 169.020514] BUG: soft lockup - CPU#37 stuck for 91s! [swapper:0] [ 169.020514] BUG: soft lockup - CPU#45 stuck for 91s! [sh:4515] [ 169.020515] BUG: soft lockup - CPU#69 stuck for 92s! [swapper:0] [ 169.020515] BUG: soft lockup - CPU#77 stuck for 92s! [swapper:0] [ 169.020515] BUG: soft lockup - CPU#61 stuck for 92s! [swapper:0] [ 169.112554] BUG: soft lockup - CPU#85 stuck for 92s! [swapper:0] [ 169.112554] BUG: soft lockup - CPU#101 stuck for 92s! [swapper:0] [ 169.112554] BUG: soft lockup - CPU#109 stuck for 92s! [swapper:0] [ 169.112554] BUG: soft lockup - CPU#117 stuck for 92s! [swapper:0] [ 169.171483] BUG: soft lockup - CPU#40 stuck for 80s! [dd:3239] [ 169.331483] BUG: soft lockup - CPU#13 stuck for 86s! [swapper:0] [ 169.351500] BUG: soft lockup - CPU#43 stuck for 101s! [dd:3239] [ 169.531482] BUG: soft lockup - CPU#9 stuck for 129s! [mkdir:4565] [ 169.595754] BUG: soft lockup - CPU#20 stuck for 93s! [swapper:0] [ 169.626787] BUG: soft lockup - CPU#52 stuck for 93s! [swapper:0] [ 169.626787] BUG: soft lockup - CPU#84 stuck for 92s! [swapper:0] [ 169.636812] BUG: soft lockup - CPU#116 stuck for 94s! [swapper:0] It's simple enough to trigger this by doing a 10 minute sleep after a fresh bootup then starting a parallel kernel build. I suspect this might be reintroducing a problem we've had and fixed before, see the thread: http://marc.info/?l=linux-kernel&m=119546414004065&w=2 <---------------| touch the softlockup watchdog when exiting NOHZ state - we are obviously not locked up. Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'master' of ↵Linus Torvalds2008-04-21
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt: hrtimer: optimize the softirq time optimization hrtimer: reduce calls to hrtimer_get_softirq_time() clockevents: fix typo in tick-broadcast.c jiffies: add time_is_after_jiffies and others which compare with jiffies
| * clockevents: fix typo in tick-broadcast.cGlauber Costa2008-04-21
| | | | | | | | | | | | | | | | braodcast -> broadcast Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | Merge branch 'for-linus' of ↵Linus Torvalds2008-04-21
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel: (62 commits) sched: build fix sched: better rt-group documentation sched: features fix sched: /debug/sched_features sched: add SCHED_FEAT_DEADLINE sched: debug: show a weight tree sched: fair: weight calculations sched: fair-group: de-couple load-balancing from the rb-trees sched: fair-group scheduling vs latency sched: rt-group: optimize dequeue_rt_stack sched: debug: add some debug code to handle the full hierarchy sched: fair-group: SMP-nice for group scheduling sched, cpuset: customize sched domains, core sched, cpuset: customize sched domains, docs sched: prepatory code movement sched: rt: multi level group constraints sched: task_group hierarchy sched: fix the task_group hierarchy for UID grouping sched: allow the group scheduler to have multiple levels sched: mix tasks and groups ...
| * | sched: rt-group: synchonised bandwidth periodPeter Zijlstra2008-04-19
| |/ | | | | | | | | | | | | | | | | | | | | Various SMP balancing algorithms require that the bandwidth period run in sync. Possible improvements are moving the rt_bandwidth thing into root_domain and keeping a span per rt_bandwidth which marks throttled cpus. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* / x86: tsc prevent time going backwardsThomas Gleixner2008-04-19
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We already catch most of the TSC problems by sanity checks, but there is a subtle bug which has been in the code forever. This can cause time jumps in the range of hours. This was reported in: http://lkml.org/lkml/2007/8/23/96 and http://lkml.org/lkml/2008/3/31/23 I was able to reproduce the problem with a gettimeofday loop test on a dual core and a quad core machine which both have sychronized TSCs. The TSCs seems not to be perfectly in sync though, but the kernel is not able to detect the slight delta in the sync check. Still there exists an extremly small window where this delta can be observed with a real big time jump. So far I was only able to reproduce this with the vsyscall gettimeofday implementation, but in theory this might be observable with the syscall based version as well. CPU 0 updates the clock source variables under xtime/vyscall lock and CPU1, where the TSC is slighty behind CPU0, is reading the time right after the seqlock was unlocked. The clocksource reference data was updated with the TSC from CPU0 and the value which is read from TSC on CPU1 is less than the reference data. This results in a huge delta value due to the unsigned subtraction of the TSC value and the reference value. This algorithm can not be changed due to the support of wrapping clock sources like pm timer. The huge delta is converted to nanoseconds and added to xtime, which is then observable by the caller. The next gettimeofday call on CPU1 will show the correct time again as now the TSC has advanced above the reference value. To prevent this TSC specific wreckage we need to compare the TSC value against the reference value and return the latter when it is larger than the actual TSC value. I pondered to mark the TSC unstable when the readout is smaller than the reference value, but this would render an otherwise good and fast clocksource unusable without a real good reason. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrtLinus Torvalds2008-04-18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt: clocksource: make clocksource watchdog cycle through online CPUs Documentation: move timer related documentation to a single place clockevents: optimise tick_nohz_stop_sched_tick() a bit locking: remove unused double_spin_lock() hrtimers: simplify lockdep handling timers: simplify lockdep handling posix-timers: fix shadowed variables timer_list: add annotations to workqueue.c hrtimer: use nanosleep specific restart_block fields hrtimer: add nanosleep specific restart_block member
| * clocksource: make clocksource watchdog cycle through online CPUsAndi Kleen2008-04-17
| | | | | | | | | | | | | | | | | | | | This way it checks if the clocks are synchronized between CPUs too. This might be able to detect slowly drifting TSCs which only go wrong over longer time. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * clockevents: optimise tick_nohz_stop_sched_tick() a bitKarsten Wiese2008-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Call ts = &per_cpu(tick_cpu_sched, cpu); and cpu = smp_processor_id(); once instead of twice. No functional change done, as changed code runs with local irq off. Reduces source lines and text size (20bytes on x86_64). [ akpm@linux-foundation.org: Build fix ] Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdbLinus Torvalds2008-04-18
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdb: kgdb: always use icache flush for sw breakpoints kgdb: fix SMP NMI kgdb_handle_exception exit race kgdb: documentation fixes kgdb: allow static kgdbts boot configuration kgdb: add documentation kgdb: Kconfig fix kgdb: add kgdb internal test suite kgdb: fix several kgdb regressions kgdb: kgdboc pl011 I/O module kgdb: fix optional arch functions and probe_kernel_* kgdb: add x86 HW breakpoints kgdb: print breakpoint removed on exception kgdb: clocksource watchdog kgdb: fix NMI hangs kgdb: fix kgdboc dynamic module configuration kgdb: document parameters x86: kgdb support consoles: polling support, kgdboc kgdb: core uaccess: add probe_kernel_write()
| * | kgdb: clocksource watchdogJason Wessel2008-04-17
| |/ | | | | | | | | | | | | | | In order to not trip the clocksource watchdog, kgdb must touch the clocksource watchdog on the return to normal system run state. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* / [S390] genirq/clockevents: move irq affinity prototypes/inlines to interrupt.hRussell King2008-04-17
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | > Generic code is not supposed to include irq.h. Replace this include > by linux/hardirq.h instead and add/replace an include of linux/irq.h > in asm header files where necessary. > This change should only matter for architectures that make use of > GENERIC_CLOCKEVENTS. > Architectures in question are mips, x86, arm, sh, powerpc, uml and sparc64. > > I did some cross compile tests for mips, x86_64, arm, powerpc and sparc64. > This patch fixes also build breakages caused by the include replacement in > tick-common.h. I generally dislike adding optional linux/* includes in asm/* includes - I'm nervous about this causing include loops. However, there's a separate point to be discussed here. That is, what interfaces are expected of every architecture in the kernel. If generic code wants to be able to set the affinity of interrupts, then that needs to become part of the interfaces listed in linux/interrupt.h rather than linux/irq.h. So what I suggest is this approach instead (against Linus' tree of a couple of days ago) - we move irq_set_affinity() and irq_can_set_affinity() to linux/interrupt.h, change the linux/irq.h includes to linux/interrupt.h and include asm/irq_regs.h where needed (asm/irq_regs.h is supposed to be rarely used include since not much touches the stacked parent context registers.) Build tested on ARM PXA family kernels and ARM's Realview platform kernels which both use genirq. [ tglx@linutronix.de: add GENERIC_HARDIRQ dependencies ] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
* clocksource: revert: use init_timer_deferrable for clocksource_watchdogThomas Gleixner2008-03-25
| | | | | | | | | | | | | | | | | | | | Revert commit 1077f5a917b7c630231037826b344b2f7f5b903f Author: Parag Warudkar <parag.warudkar@gmail.com> Date: Wed Jan 30 13:30:01 2008 +0100 clocksource.c: use init_timer_deferrable for clocksource_watchdog clocksource_watchdog can use a deferrable timer - reduces wakeups from idle per second. The watchdog timer needs to run with the specified interval. Otherwise it will miss the possible wrap of the watchdog clocksource. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
* Don't 'printk()' while holding xtime lock for writingLinus Torvalds2008-03-24
| | | | | | | | | | | The printk() can deadlock because it can wake up klogd(), and task enqueueing will try to read the time in order to set a hrtimer. Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Debugged-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* revert "clocksource: make clocksource watchdog cycle through online CPUs"Andrew Morton2008-03-19
| | | | | | | | | | | | | | | | | | | | | Revert commit 1ada5cba6a0318f90e45b38557e7b5206a9cba38 ("clocksource: make clocksource watchdog cycle through online CPUs") due to the regression reported by Gabriel C at http://lkml.org/lkml/2008/2/24/281 (short vesion: it makes TSC be marked as always unstable on his machine). Cc: Andi Kleen <ak@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Robert Hancock <hancockr@shaw.ca> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Gabriel C <nix.or.die@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* time: remove obsolete CLOCK_TICK_ADJUSTRoman Zippel2008-03-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The first version of the ntp_interval/tick_length inconsistent usage patch was recently merged as bbe4d18ac2e058c56adb0cd71f49d9ed3216a405 http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bbe4d18ac2e058c56adb0cd71f49d9ed3216a405 While the fix did greatly improve the situation, it was correctly pointed out by Roman that it does have a small bug: If the users change clocksources after the system has been running and NTP has made corrections, the correctoins made against the old clocksource will be applied against the new clocksource, causing error. The second attempt, which corrects the issue in the NTP_INTERVAL_LENGTH definition has also made it up-stream as commit e13a2e61dd5152f5499d2003470acf9c838eab84 http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e13a2e61dd5152f5499d2003470acf9c838eab84 Roman has correctly pointed out that CLOCK_TICK_ADJUST is calculated based on the PIT's frequency, and isn't really relevant to non-PIT driven clocksources (that is, clocksources other then jiffies and pit). This patch reverts both of those changes, and simply removes CLOCK_TICK_ADJUST. This does remove the granularity error correction for users of PIT and Jiffies clocksource users, but the granularity error but for the majority of users, it should be within the 500ppm range NTP can accommodate for. For systems that have granularity errors greater then 500ppm, the "ntp_tick_adj=" boot option can be used to compensate. [johnstul@us.ibm.com: provided changelog] [mattilinnanvuori@yahoo.com: maek ntp_tick_adj static] Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Acked-by: john stultz <johnstul@us.ibm.com> Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* time: don't touch an offlined CPU's ts->tick_stopped in ↵Karsten Wiese2008-03-09
| | | | | | | | | | | | | | | | | | tick_cancel_sched_timer() Silences WARN_ONs in rcu_enter_nohz() and rcu_exit_nohz(), which appeared before caused by (repeated) calls to: $ echo 0 > /sys/devices/system/cpu/cpu1/online $ echo 1 > /sys/devices/system/cpu/cpu1/online Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: johnstul@us.ibm.com Cc: Rafael Wysocki <rjw@sisk.pl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ntp: use unsigned input for do_div()David Howells2008-03-09
| | | | | | | | | | | | The kernel NTP code shouldn't hand 64-bit *signed* values to do_div(). Make it instead hand 64-bit unsigned values. This gets rid of a couple of warnings. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* rcu: add support for dynamic ticks and preempt rcuSteven Rostedt2008-02-29
| | | | | | | | | | | | | | | The PREEMPT-RCU can get stuck if a CPU goes idle and NO_HZ is set. The idle CPU will not progress the RCU through its grace period and a synchronize_rcu my get stuck. Without this patch I have a box that will not boot when PREEMPT_RCU and NO_HZ are set. That same box boots fine with this patch. This patch comes from the -rt kernel where it has been tested for several months. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* timer_list: print relative expiry time signedPavel Machek2008-02-17
| | | | | | | | Relative expiry time can get negative, so it should be signed. Signed-off-by: Pavel Machek <Pavel@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ntp: correct inconsistent interval/tick_length usagejohn stultz2008-02-10
| | | | | | | | | | | | | clocksource initialization and error accumulation. This corrects a 280ppm drift seen on some systems using acpi_pm, and affects other clocksources as well (likely to a lesser degree). Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* time: fix typo in commentsLi Zefan2008-02-08
| | | | | | | | | | | | | | Fix typo in comments. BTW: I have to fix coding style in arch/ia64/kernel/time.c also, otherwise checkpatch.pl will be complaining. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* timekeeping: rename timekeeping_is_continuous to timekeeping_valid_for_hresLi Zefan2008-02-08
| | | | | | | | | | | | | Function timekeeping_is_continuous() no longer checks flag CLOCK_IS_CONTINUOUS, and it checks CLOCK_SOURCE_VALID_FOR_HRES now. So rename the function accordingly. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* clockevent: simplify list operationsLi Zefan2008-02-08
| | | | | | | | | | | list_for_each_safe() suffices here. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* clocksource: remove redundant codeLi Zefan2008-02-08
| | | | | | | | | | | | Flag CLOCK_SOURCE_WATCHDOG is cleared twice. Note clocksource_change_rating() won't do anyting with the cs flag. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* time: fix sysfs_show_{available,current}_clocksources() buffer overflow problemMiao Xie2008-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I found that there is a buffer overflow problem in the following code. Version: 2.6.24-rc2, File: kernel/time/clocksource.c:417-432 -------------------------------------------------------------------- static ssize_t sysfs_show_available_clocksources(struct sys_device *dev, char *buf) { struct clocksource *src; char *curr = buf; spin_lock_irq(&clocksource_lock); list_for_each_entry(src, &clocksource_list, list) { curr += sprintf(curr, "%s ", src->name); } spin_unlock_irq(&clocksource_lock); curr += sprintf(curr, "\n"); return curr - buf; } ----------------------------------------------------------------------- sysfs_show_current_clocksources() also has the same problem though in practice the size of current clocksource's name won't exceed PAGE_SIZE. I fix the bug by using snprintf according to the specification of the kernel (Version:2.6.24-rc2,File:Documentation/filesystems/sysfs.txt) Fix sysfs_show_available_clocksources() and sysfs_show_current_clocksources() buffer overflow problem with snprintf(). Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tick-sched: add more debug informationThomas Gleixner2008-02-01
| | | | | | | | | | | | To allow better diagnosis of tick-sched related, especially NOHZ related problems, we need to know when the last wakeup via an irq happened and when the CPU left the idle state. Add two fields (idle_waketime, idle_exittime) to the tick_sched structure and add them to the timer_list output. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* timekeeping: update xtime_cache when time(zone) changesThomas Gleixner2008-02-01
| | | | | | | | | | | | | | xtime_cache needs to be updated whenever xtime and or wall_to_monotic are changed. Otherwise users of xtime_cache might see a stale (and in the case of timezone changes utterly wrong) value until the next update happens. Fixup the obvious places, which miss this update. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <johnstul@us.ibm.com> Tested-by: Dhaval Giani <dhaval@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* time: track accurate idle time with tick_sched.idle_sleeptimeVenki Pallipadi2008-01-30
| | | | | | | | | | | | | | | | | | | | | Current idle time in kstat is based on jiffies and is coarse grained. tick_sched.idle_sleeptime is making some attempt to keep track of idle time in a fine grained manner. But, it is not handling the time spent in interrupts fully. Make tick_sched.idle_sleeptime accurate with respect to time spent on handling interrupts and also add tick_sched.idle_lastupdate, which keeps track of last time when idle_sleeptime was updated. This statistics will be crucial for cpufreq-ondemand governor, which can shed some conservative gaurd band that is uses today while setting the frequency. The ondemand changes that uses the exact idle time is coming soon. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* NTP: correct inconsistent ntp interval/tick_length usagejohn stultz2008-01-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I recently noticed on one of my boxes that when synched with an NTP server, the drift value reported for the system was ~283ppm. While in some cases, clock hardware can be that bad, it struck me as unusual as the system was using the acpi_pm clocksource, which is one of the more trustworthy and accurate clocksources on x86 hardware. I brought up another system and let it sync to the same NTP server, and I noticed a similar 280some ppm drift. In looking at the code, I found that the acpi_pm's constant frequency was being computed correctly at boot-up, however once the system was up, even without the ntp daemon running, the clocksource's frequency was being modified by the clocksource_adjust() function. Digging deeper, I realized that in the code that keeps track of how much the clocksource is skewing from the ntp desired time, we were using different lengths to establish how long an time interval was. The clocksource was being setup with the following interval: NTP_INTERVAL_LENGTH = NSEC_PER_SEC/NTP_INTERVAL_FREQ While the ntp code was using the tick_length_base value: tick_length_base ~= (tick_usec * NSEC_PER_USEC * USER_HZ) /NTP_INTERVAL_FREQ The subtle difference is: (tick_usec * NSEC_PER_USEC * USER_HZ) != NSEC_PER_SEC This difference in calculation was causing the clocksource correction code to apply a correction factor to the clocksource so the two intervals were the same, however this results in the actual frequency of the clocksource to be made incorrect. I believe this difference would affect all clocksources, although to differing degrees depending on the clocksource resolution. The issue was introduced when my HZ free ntp patch landed in 2.6.21-rc1, so my apologies for the mistake, and for not noticing it until now. The following patch, corrects the clocksource's initialization code so it uses the same interval length as the code in ntp.c. After applying this patch, the drift value for the same system went from ~283ppm to only 2.635ppm. I believe this patch to be good, however it does affect all arches and I've only tested on x86, so some caution is advised. I do think it would be a likely candidate for a stable 2.6.24.x release. Any thoughts or feedback would be appreciated. Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: make clockevents more robustIngo Molnar2008-01-30
| | | | | | | | | detect zero event-device multiplicators - they then cause division-by-zero crashes if a clockevent has been initialized incorrectly. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* clocksource: add unregister function to disable unusable clocksourcesThomas Gleixner2008-01-30
| | | | | | | | | On x86 the PIT might become an unusable clocksource. Add an unregister function to provide a possibilty to remove the PIT from the list of available clock sources. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* clocksource: make clocksource watchdog cycle through online CPUsAndi Kleen2008-01-30
| | | | | | | | | | This way it checks if the clocks are synchronized between CPUs too. This might be able to detect slowly drifting TSCs which only go wrong over longer time. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* clocksource.c: use init_timer_deferrable for clocksource_watchdogParag Warudkar2008-01-30
| | | | | | | | | | | clocksource_watchdog can use a deferrable timer - reduces wakeups from idle per second. Signed-off-by: Parag Warudkar <parag.warudkar@gmail.com> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* time: fold __get_realtime_clock_ts() into getnstimeofday()Geert Uytterhoeven2008-01-30
| | | | | | | | | | | | - getnstimeofday() was just a wrapper around __get_realtime_clock_ts() - Replace calls to __get_realtime_clock_ts() by calls to getnstimeofday() - Fix bogus reference to get_realtime_clock_ts(), which never existed Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* timer: clean up tick-broadcast.cThomas Gleixner2008-01-30
| | | | | | | clean up tick-broadcast.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* time: more timer related cleanupsPavel Machek2008-01-30
| | | | | | | | | I was confused by FSEC = 10^15 NSEC statement, plus small whitespace fixes. When there's copyright, there should be GPL. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* time: timer cleanupsPavel Machek2008-01-30
| | | | | | | | | | | Small cleanups to tick-related code. Wrong preempt count is followed by BUG(), so it is hardly KERN_WARNING. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* hrtimer: clean up cpu->base locking tricksPeter Zijlstra2008-01-25
| | | | | | | | In order to more easily allow for the scheduler to use timers, clean up the locking a bit. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-13 14:03:26 -0500