aboutsummaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAge
* libata: add deadline support to prereset and reset methodsTejun Heo2007-05-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pm: include EIO from errno-base.hDavid Rientjes2007-04-30
| | | | | | | | | | | For backwards compatibility, call_platform_enable_wakeup() can return 0 instead of -EIO since we aren't guaranteed to have errno defined. Cc: David Brownell <david-b@pacbell.net> Signed-off-by: David Rientjes <rientjes@google.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add kvasprintf()Jeremy Fitzhardinge2007-04-30
| | | | | | | | | | | | | Add a kvasprintf() function to complement kasprintf(). No in-tree users yet, but I have some coming up. [akpm@linux-foundation.org: EXPORT it] Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Keir Fraser <keir@xensource.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* power management: force pm_ops.valid callback to be assignedJohannes Berg2007-04-30
| | | | | | | | | | | | | | | | | | This patch changes the docs and behaviour from "all states valid" to "no states valid" if no .valid callback is assigned. Users of pm_ops that only need mem sleep can assign pm_valid_only_mem without any overhead, others will require more elaborate callbacks. Now that all users of pm_ops have a .valid callback this is a safe thing to do and prevents things from getting messy again as they were before. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Pavel Machek <pavel@ucw.cz> Looks-okay-to: Rafael J. Wysocki <rjw@sisk.pl> Cc: <linux-pm@lists.linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* power management: implement pm_ops.valid for everybodyJohannes Berg2007-04-30
| | | | | | | | | | | | | | | | | | | | | | Almost all users of pm_ops only support mem sleep, don't check in .valid and don't reject any others in .prepare so users can be confused if they check /sys/power/state, especially when new states are added (these would then result in s-t-r although they're supposed to be something different). This patch implements a generic pm_valid_only_mem function that is then exported for users and puts it to use in almost all existing pm_ops. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: David Brownell <david-b@pacbell.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: linux-pm@lists.linux-foundation.org Cc: Len Brown <lenb@kernel.org> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* power management: remove firmware disk modeJohannes Berg2007-04-30
| | | | | | | | | | | | | | | | | | This patch removes the firmware disk suspend mode which is the wrong approach, it is supposed to be used for implementing firmware-based disk suspend but cannot actually be used for that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: <linux-pm@lists.linux-foundation.org> Cc: David Brownell <david-b@pacbell.net> Cc: Len Brown <lenb@kernel.org> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rework pm_ops pm_disk_mode, kill misuseJohannes Berg2007-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch series cleans up some misconceptions about pm_ops. Some users of the pm_ops structure attempt to use it to stop the user from entering suspend to disk, this, however, is not possible since the user can always use "shutdown" in /sys/power/disk and then the pm_ops are never invoked. Also, platforms that don't support suspend to disk simply should not allow configuring SOFTWARE_SUSPEND (read the help text on it, it only selects suspend to disk and nothing else, all the other stuff depends on PM). The pm_ops structure is actually intended to provide a way to enter platform-defined sleep states (currently supported states are "standby" and "mem" (suspend to ram)) and additionally (if SOFTWARE_SUSPEND is configured) allows a platform to support a platform specific way to enter low-power mode once everything has been saved to disk. This is currently only used by ACPI (S4). This patch: The pm_ops.pm_disk_mode is used in totally bogus ways since nobody really seems to understand what it actually does. This patch clarifies the pm_disk_mode description. It also removes all the arm and sh users that think they can veto suspend to disk via pm_ops; not so since the user can always do echo shutdown > /sys/power/disk, they need to find a better way involving Kconfig or such. ACPI is the only user left with a non-zero pm_disk_mode. The patch also sets the default mode to shutdown again, but when a new pm_ops is registered its pm_disk_mode is selected as default, that way the default stays for ACPI where it is apparently required. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: David Brownell <david-b@pacbell.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: <linux-pm@lists.linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Extend print_symbol capabilityRobert Peterson2007-04-30
| | | | | | | | | | | | | | | | | | | | | Today's print_symbol function dumps a kernel symbol with printk. This patch extends the functionality of kallsyms.c so that the symbol lookup function may be used without the printk. This is useful for modules that want to dump symbols elsewhere, for example, to debugfs. I intend to use the new function call in the GFS2 file system (which will be a separate patch). [akpm@linux-foundation.org: build fix] [clameter@sgi.com: sprint_symbol should return length of string like sprintf] Signed-off-by: Robert Peterson <rpeterso@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Paulo Marques <pmarques@grupopie.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2007-04-30
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: (21 commits) USB HID: don't warn on idVendor == 0 USB HID: add 'quirks' module parameter USB HID: add support for dynamically-created quirks USB HID: clarify static quirk handling as squirks USB HID: encapsulate quirk handling into hid-quirks.c USB HID: EMS USBII device needs HID_QUIRK_MULTI_INPUT HID: update copyright and authorship macro HID: introduce proper zeroing of unused bits in output reports USB HID: add support for WiseGroup MP-8800 Quad Joypad USB HID: add FF support for Logitech Force 3D Pro Joystick USB HID: numlock quirk for dell W7658 keyboard USB HID: Logitech MX3000 keyboard needs report descriptor quirk USB HID: extend quirk for Logitech S510 keyboard USB HID: usbkbd/usbmouse - handle errors when registering devices USB HID: add QUIRK_HIDDEV for Belkin Flip KVM HID: enable dead keys on a belkin wireless keyboard USB HID: Thustmaster firestorm dual power v1 support USB HID: specify explicit size for hid_blacklist.quirks USB HID: fix retry & reset logic USB HID: consolidate vendor/product ids ...
| * USB HID: add 'quirks' module parameterPaul Walmsley2007-04-19
| | | | | | | | | | | | | | | | Add a 'quirks' module parameter for the usbhid module, so users can add or modify quirks at module load time. Signed-off-by: Paul Walmsley <paul@booyaka.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * USB HID: add support for dynamically-created quirksPaul Walmsley2007-04-19
| | | | | | | | | | | | | | | | | | | | Add internal support for dynamically-allocated HID quirks, "dquirks" (for "dynamic quirks"). Includes several functions to add/modify quirks from the list. This code is used by the next patch to implement quirk modification upon module load. Signed-off-by: Paul Walmsley <paul@booyaka.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * USB HID: encapsulate quirk handling into hid-quirks.cPaul Walmsley2007-04-19
| | | | | | | | | | | | | | | | | | | | Move the USB_VENDOR* and USB_DEVICE* defines and the hid_blacklist[] array there from hid-core.c. Add hid-quirks.c:usbhid_lookup_any_quirks() to return quirk information to hid-core.c. Convert __u32, __u16 types to u32, u16. Signed-off-by: Paul Walmsley <paul@booyaka.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * USB HID: numlock quirk for dell W7658 keyboardPete Zaitcev2007-04-11
| | | | | | | | | | | | | | | | | | | | | | | | On Dell W7658 keyboard, when BIOS sets NumLock LED on, it survives the takeover by kernel and thus confuses users. Eating of an increasibly scarce quirk bit is unfortunate. We do it for safety, given the history of nervous input devices which crash if anything unusual happens. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * USB HID: Logitech MX3000 keyboard needs report descriptor quirkJiri Kosina2007-04-11
| | | | | | | | | | | | | | | | | | | | | | Logitech MX3000 contains report descriptor which doesn't cover usages above 0x28c, but emits such usages. Report descriptor needs fixing in the very same way as with receivers shipped with S510 keyboards. This patch also adds a few mappings for multimedia keys that S510 didn't emit. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2007-04-30
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) [IPV4] SNMP: Support OutMcastPkts and OutBcastPkts [IPV4] SNMP: Support InMcastPkts and InBcastPkts [IPV4] SNMP: Support InTruncatedPkts [IPV4] SNMP: Support InNoRoutes [SNMP]: Add definitions for {In,Out}BcastPkts [TCP] FRTO: RFC4138 allows Nagle override when new data must be sent [TCP] FRTO: Delay skb available check until it's mandatory [XFRM]: Restrict upper layer information by bundle. [TCP]: Catch skb with S+L bugs earlier [PATCH] INET : IPV4 UDP lookups converted to a 2 pass algo [L2TP]: Add the ability to autoload a pppox protocol module. [SKB]: Introduce skb_queue_walk_safe() [AF_IUCV/IUCV]: smp_call_function deadlock [IPV6]: Fix slab corruption running ip6sic [TCP]: Update references in two old comments [XFRM]: Export SPD info [IPV6]: Track device renames in snmp6. [SCTP]: Fix sctp_getsockopt_local_addrs_old() to use local storage. [NET]: Remove NETIF_F_INTERNAL_STATS, default to internal stats. [NETPOLL]: Remove CONFIG_NETPOLL_RX ...
| * | [SNMP]: Add definitions for {In,Out}BcastPktsMitsuru Chinen2007-04-30
| | | | | | | | | | | | | | | | | | | | | | | | The updated IP-MIB RFC (RFC4293) specifys new objects, InBcastPkts and OutBcastPkts. This adds definitions for them. Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [TCP] FRTO: RFC4138 allows Nagle override when new data must be sentIlpo Järvinen2007-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a corner case where less than MSS sized new data thingie is awaiting in the send queue. For F-RTO to work correctly, a new data segment must be sent at certain point or F-RTO cannot be used at all. RFC4138 allows overriding of Nagle at that point. Implementation uses frto_counter states 2 and 3 to distinguish when Nagle override is needed. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [XFRM]: Restrict upper layer information by bundle.Masahide NAKAMURA2007-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On MIPv6 usage, XFRM sub policy is enabled. When main (IPsec) and sub (MIPv6) policy selectors have the same address set but different upper layer information (i.e. protocol number and its ports or type/code), multiple bundle should be created. However, currently we have issue to use the same bundle created for the first time with all flows covered by the case. It is useful for the bundle to have the upper layer information to be restructured correctly if it does not match with the flow. 1. Bundle was created by two policies Selector from another policy is added to xfrm_dst. If the flow does not match the selector, it goes to slow path to restructure new bundle by single policy. 2. Bundle was created by one policy Flow cache is added to xfrm_dst as originated one. If the flow does not match the cache, it goes to slow path to try searching another policy. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [TCP]: Catch skb with S+L bugs earlierIlpo Järvinen2007-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SACKED_ACKED and LOST are mutually exclusive with SACK, thus having their sum larger than packets_out is bug with SACK. Eventually these bugs trigger traps in the tcp_clean_rtx_queue with SACK but it's much more informative to do this here. Non-SACK TCP, however, could get more than packets_out duplicate ACKs which each increment sacked_out, so it makes sense to do this kind of limitting for non-SACK TCP but not for SACK enabled one. Perhaps the author had the opposite in mind but did the logic accidently wrong way around? Anyway, the sacked_out incrementer code for non-SACK already deals this issue before calling sync_left_out so this trapping can be done unconditionally. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [SKB]: Introduce skb_queue_walk_safe()James Chapman2007-04-30
| | | | | | | | | | | | | | | | | | | | | | | | This patch provides a method for walking skb lists while inserting or removing skbs from the list. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [AF_IUCV/IUCV]: smp_call_function deadlockMartin Schwidefsky2007-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calling smp_call_function can lead to a deadlock if it is called from tasklet context. Fixing this deadlock requires to move the smp_call_function from the tasklet context to a work queue. To do that queue the path pending interrupts to a separate list and move the path cleanup out of iucv_path_sever to iucv_path_connect and iucv_path_pending. This creates a new requirement for iucv_path_connect: it may not be called from tasklet context anymore. Also fixed compile problem for CONFIG_HOTPLUG_CPU=n and another one when walking the cpu_online mask. When doing this, we must disable cpu hotplug. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [XFRM]: Export SPD infoJamal Hadi Salim2007-04-29
| | | | | | | | | | | | | | | | | | | | | | | | With this patch you can use iproute2 in user space to efficiently see how many policies exist in different directions. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [NET]: Remove NETIF_F_INTERNAL_STATS, default to internal stats.Rusty Russell2007-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Herbert Xu conviced me that a new flag was overkill; every driver currently overrides get_stats, so we might as well make the internal one the default. If someone did fail to set get_stats, they would now get all 0 stats instead of "No statistics available". Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [NETPOLL]: Fix TX queue overflow in trapped mode.Sergei Shtylyov2007-04-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_NETPOLL_TRAP causes the TX queue controls to be completely bypassed in the netpoll's "trapped" mode which easily causes overflows in the drivers with short TX queues (most notably, in 8139too with its 4-deep queue). So, make this option more sensible by making it only bypass the TX softirq wakeup. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Acked-by: Tom Rini <trini@kernel.crashing.org> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds2007-04-30
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: [PATCH] elevator: elv_list_lock does not need irq disabling [BLOCK] Don't pin lots of memory in mempools cfq-iosched: speedup cic rb lookup ll_rw_blk: add io_context private pointer cfq-iosched: get rid of cfqq hash cfq-iosched: tighten queue request overlap condition cfq-iosched: improve sync vs async workloads cfq-iosched: never allow an async queue idling cfq-iosched: get rid of ->dispatch_slice cfq-iosched: don't pass unused preemption variable around cfq-iosched: get rid of ->cur_rr and ->cfq_list cfq-iosched: slice offset should take ioprio into account [PATCH] cfq-iosched: style cleanups and comments cfq-iosched: sort IDLE queues into the rbtree cfq-iosched: sort RT queues into the rbtree [PATCH] cfq-iosched: speed up rbtree handling cfq-iosched: rework the whole round-robin list concept cfq-iosched: minor updates cfq-iosched: development update cfq-iosched: improve preemption for cooperating tasks
| * \ \ Merge branch 'cfq' into for-linusJens Axboe2007-04-30
| |\ \ \
| | * | | ll_rw_blk: add io_context private pointerJens Axboe2007-04-30
| | |/ / | | | | | | | | | | | | | | | | | | | | To be used by as/cfq as they see fit. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * / / [BLOCK] Don't pin lots of memory in mempoolsJens Axboe2007-04-30
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we scale the mempool sizes depending on memory installed in the machine, except for the bio pool itself which sits at a fixed 256 entry pre-allocation. There's really no point in "optimizing" this OOM path, we just need enough preallocated to make progress. A single unit is enough, lets scale it down to 2 just to be on the safe side. This patch saves ~150kb of pinned kernel memory on a 32-bit box. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | | Merge branch 'for-2.6.22' of ↵Linus Torvalds2007-04-30
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'for-2.6.22' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (255 commits) [POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c [POWERPC] remove kernel module option for booke wdt [POWERPC] Avoid putting cpu node twice [POWERPC] Spinlock initializer cleanup [POWERPC] ppc4xx_sgdma needs dma-mapping.h [POWERPC] arch/powerpc/sysdev/timer.c build fix [POWERPC] get_property cleanups [POWERPC] Remove the unused HTDMSOUND driver [POWERPC] cell: cbe_cpufreq cleanup and crash fix [POWERPC] Declare enable_kernel_spe in a header [POWERPC] Add dt_xlate_addr() to bootwrapper [POWERPC] bootwrapper: CONFIG_ -> CONFIG_DEVICE_TREE [POWERPC] Don't define a custom bd_t for Xilixn Virtex based boards. [POWERPC] Add sane defaults for Xilinx EDK generated xparameters files [POWERPC] Add uartlite boot console driver for the zImage wrapper [POWERPC] Stop using ppc_sys for Xilinx Virtex boards [POWERPC] New registration for common Xilinx Virtex ppc405 platform devices [POWERPC] Merge common virtex header files [POWERPC] Rework Kconfig dependancies for Xilinx Virtex ppc405 platform [POWERPC] Clean up cpufreq Kconfig dependencies ...
| * | | Merge branch 'linux-2.6' into for-2.6.22Paul Mackerras2007-04-29
| |\| |
| * | | [POWERPC] Declare enable_kernel_spe in a headerJohannes Berg2007-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch puts enable_kernel_spe into <asm-powerpc/system.h> along with enable_kernel_altivec etc. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Stop using ppc_sys for Xilinx Virtex boardsGrant Likely2007-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The arch/ppc/syslib/ppc_sys.c infrastructure does not work well for the virtex ports. Move the ml300 and ml403 board ports over to use the new virtex_devices infrastructure. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Merge common virtex header filesGrant Likely2007-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The header files for the ml403 and ml300 are virtually identical, merge them into a single file. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Generic check_legacy_ioportOlaf Hering2007-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | check_legacy_ioport makes only sense on PREP, CHRP and pSeries. They may have an isa node with PS/2, parport, floppy and serial ports. Remove the check_legacy_ioport call from ppc_md, it's not needed anymore. Hardware capabilities come from the device-tree. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Prepare for splitting up mmu.h by MMU typeDavid Gibson2007-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently asm-powerpc/mmu.h has definitions for the 64-bit hash based MMU. If CONFIG_PPC64 is not set, it instead includes asm-ppc/mmu.h which contains a particularly horrible mess of #ifdefs giving the definitions for all the various 32-bit MMUs. It would be nice to have the low level definitions for each MMU type neatly in their own separate files. It would also be good to wean arch/powerpc off dependence on the old asm-ppc/mmu.h. This patch makes a start on such a cleanup by moving the definitions for the 64-bit hash MMU to their own file, asm-powerpc/mmu_hash64.h. Definitions for the other MMUs still all come from asm-ppc/mmu.h, however each MMU type can now be one-by-one moved over to their own file, in the process cleaning them up stripping them of cruft no longer necessary in arch/powerpc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Remove old interface find_devicesStephen Rothwell2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace uses with of_find_node_by_name and for_each_node_by_name. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Remove old interface find_type_devicesStephen Rothwell2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replaced by of_find_node_by_type. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Remove old interface find_path_deviceStephen Rothwell2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replaced by of_find_node_by_path. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Remove find_all_nodesStephen Rothwell2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This old interface has no more users. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Remove find_compatible_devicesStephen Rothwell2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an old interface and is replaced by of_find_compatible_node. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Cleanup and fix breakage in tlbflush.hDavid Gibson2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BenH's commit a741e67969577163a4cfc78d7fd2753219087ef1 in powerpc.git, although (AFAICT) only intended to affect ppc64, also has side-effects which break 44x. I think 40x, 8xx and Freescale Book E are also affected, though I haven't tested them. The problem lies in unconditionally removing flush_tlb_pending() from the versions of flush_tlb_mm(), flush_tlb_range() and flush_tlb_kernel_range() used on ppc64 - which are also used the embedded platforms mentioned above. The patch below cleans up the convoluted #ifdef logic in tlbflush.h, in the process restoring the necessary flushes for the software TLB platforms. There are three sets of definitions for the flushing hooks: the software TLB versions (revised to avoid using names which appear to related to TLB batching), the 32-bit hash based versions (external functions) amd the 64-bit hash based versions (which implement batching). It also moves the declaration of update_mmu_cache() to always be in tlbflush.h (previously it was in tlbflush.h except for PPC64, where it was in pgtable.h). Booted on Ebony (440GP) and compiled for 64-bit and 32-bit multiplatform. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Save trap number in bad_stackOlof Johansson2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Save the trap number in the case of getting a bad stack in an exception handler. It is sometimes useful to know what exception it was that caused this to happen. Without this, no trap number is reported. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQSMichael Ellerman2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename MPIC_BROKEN_U3 to something a little more descriptive. Its effect is to enable support for HT irqs behind the PCI-X/HT bridge on U3/U4 (aka. CPC9x5) parts. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Add arch/powerpc driver for UIC, PPC4xx interrupt controllerDavid Gibson2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver to arch/powerpc/sysdev for the UIC, the on-chip interrupt controller from IBM/AMCC 4xx chips. It uses the new irq host mapping infrastructure. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] kprobes: Eliminate sstep exception if instruction can be emulatedAnanth N Mavinakayanahalli2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For cases when probes are placed on instructions that can be emulated, don't take the single-step exception. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] pasemi: PA6T oprofile supportOlof Johansson2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Oprofile support for PA6T, kernel side. Also rename the PA6T_SPRN.* defines to SPRN_PA6T.*. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Fix PowerPC 750CL and 750GX CPU featuresJosh Boyer2007-04-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PowerPC 750CL has high BATs. The patch below adds a CPU_FTRS_750CL that includes that. Without it, the original firmware mappings in the high BATs aren't cleared which continue to override the linux translations. It also adds CPU_FTR_COMMON to CPU_FTRS_750GX for completeness. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | Merge branch 'for-2.6.22' of ↵Paul Mackerras2007-04-23
| |\ \ \ | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6 into for-2.6.22
| | * | | [POWERPC] add of_iomap functionChristian Krafft2007-04-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The of_iomap function maps memory for a given device_node and returns a pointer to that memory. This is used at some places, so it makes sense to a seperate function. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
| | * | | [POWERPC] cell: add cbe_node_to_cpu functionChristian Krafft2007-04-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds code to deal with conversion of logical cpu to cbe nodes. It removes code that assummed there were two logical CPUs per CBE. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-20 01:20:21 -0500