aboutsummaryrefslogtreecommitdiffstats
path: root/include/scsi/scsi_cmnd.h
Commit message (Collapse)AuthorAge
* [SCSI] Deprecate SCSI_PROT_*_CONVERT operationsMartin K. Petersen2009-10-02
| | | | | | | | | | | | | | The checksum format is orthogonal to whether the protection information is being passed on beyond the HBA or not. It is perfectly valid to use a non-T10 CRC with WRITE_STRIP and READ_INSERT. Consequently it no longer makes sense to explicitly refer to the conversion in the protection operation. Update sd_dif and lpfc accordingly. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Ihab Hamadi <Ihab.Hamadi@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* block: convert to pos and nr_sectors accessorsTejun Heo2009-05-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [SCSI] Make scsi.h independent of the rest of the scsi includesJames Bottomley2009-03-12
| | | | | | | | This allows it to compile and be used on the ps3 platform that wants to use the #define values in scsi.h without actually having CONFIG_SCSI set. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* block: unify request timeout handlingJens Axboe2008-10-09
| | | | | | | | | | | | | Right now SCSI and others do their own command timeout handling. Move those bits to the block layer. Instead of having a timer per command, we try to be a bit more clever and simply have one per-queue. This avoids the overhead of having to tear down and setup a timer for each command, so it will result in a lot less timer fiddling. Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [SCSI] Support devices with protection informationMartin K. Petersen2008-07-26
| | | | | | | | | | | | | | | | | Implement support for DMA of protection information for devices that are data integrity capable. - Add support for mapping an extra scatter-gather list containing the protection information. - Allocate protection scsi_data_buffer if host is DIX (integrity DMA) capable. - Accessor function for checking whether a device has protection enabled. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] Command protection operationMartin K. Petersen2008-07-26
| | | | | | | | | | | | | | | | | | | | | | | | | Controllers that support DMA of protection information must be told explicitly how to handle the I/O. The controller has no knowledge of the protection capabilities of the target device so this information must be passed in the scsi_cmnd. - The protection operation tells the HBA whether to generate, strip or verify protection information. - The protection type tells the HBA which layout the target is formatted with. This is necessary because the controller must be able to correctly interpret the included protection information in order to verify it. - When a scsi_cmnd is reused for error handling the protection operation must be cleared and saved while error handling is in progress. - prot_op and prot_type are placed in an existing hole in scsi_cmnd and don't cause the structure to grow. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.hAlexander Beregalov2008-07-12
| | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] add support for variable length extended commandsBoaz Harrosh2008-05-02
| | | | | | | | | | | | | | | | Add support for variable-length, extended, and vendor specific CDBs to scsi-ml. It is now possible for initiators and ULD's to issue these types of commands. LLDs need not change much. All they need is to raise the .max_cmd_len to the longest command they support (see iscsi patch). - clean-up some code paths that did not expect commands to be larger than 16, and change cmd_len members' type to short as char is not enough. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] Let scsi_cmnd->cmnd use request->cmd bufferBoaz Harrosh2008-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - struct scsi_cmnd had a 16 bytes command buffer of its own. This is an unnecessary duplication and copy of request's cmd. It is probably left overs from the time that scsi_cmnd could function without a request attached. So clean that up. - Once above is done, few places, apart from scsi-ml, needed adjustments due to changing the data type of scsi_cmnd->cmnd. - Lots of drivers still use MAX_COMMAND_SIZE. So I have left that #define but equate it to BLK_MAX_CDB. The way I see it and is reflected in the patch below is. MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB as per the SCSI standard and is not related to the implementation. BLK_MAX_CDB. - The allocated space at the request level - I have audit all ISA drivers and made sure none use ->cmnd in a DMA Operation. Same audit was done by Andi Kleen. (*)fixed-length here means commands that their size can be determined by their opcode and the CDB does not carry a length specifier, (unlike the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly true and the SCSI standard also defines extended commands and vendor specific commands that can be bigger than 16 bytes. The kernel will support these using the same infrastructure used for VARLEN CDB's. So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml supports without specifying a cmd_len by ULD's Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] export command allocation and freeing functions independently of the hostJames Bottomley2008-04-07
| | | | | | | This is needed by things like USB storage that want to set up static commands for later use at start of day. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] scsi: add wrapper functions for sg buffer copy helper functionsFUJITA Tomonori2008-04-07
| | | | | | | | | | | | | | | | LLDs need to copies data between the SG table in struct scsi_cmnd and liner buffer. So they use the helper functions like sg_copy_from_buffer(scsi_sglist(sc), scsi_sg_count(sc), buf, buflen) sg_copy_to_buffer(scsi_sglist(sc), scsi_sg_count(sc), buf, buflen) This patch just adds wrapper functions: scsi_sg_copy_from_buffer(sc, buf, buflen) scsi_sg_copy_to_buffer(sc, buf, buflen) Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] bidirectional command supportBoaz Harrosh2008-01-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the block level bidi request uses req->next_rq pointer for a second bidi_read request. At Scsi-midlayer a second scsi_data_buffer structure is used for the bidi_read part. This bidi scsi_data_buffer is put on request->next_rq->special. Struct scsi_cmnd is not changed. - Define scsi_bidi_cmnd() to return true if it is a bidi request and a second sgtable was allocated. - Define scsi_in()/scsi_out() to return the in or out scsi_data_buffer from this command This API is to isolate users from the mechanics of bidi. - Define scsi_end_bidi_request() to do what scsi_end_request() does but for a bidi request. This is necessary because bidi commands are a bit tricky here. (See comments in body) - scsi_release_buffers() will also release the bidi_read scsi_data_buffer - scsi_io_completion() on bidi commands will now call scsi_end_bidi_request() and return. - The previous work done in scsi_init_io() is now done in a new scsi_init_sgtable() (which is 99% identical to old scsi_init_io()) The new scsi_init_io() will call the above twice if needed also for the bidi_read command. Only at this point is a command bidi. - In scsi_error.c at scsi_eh_prep/restore_cmnd() make sure bidi-lld is not confused by a get-sense command that looks like bidi. This is done by puting NULL at request->next_rq, and restoring. [jejb: update to sg_table and resolve conflicts also update to blk-end-request and resolve conflicts] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] implement scsi_data_bufferBoaz Harrosh2008-01-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for bidi we abstract all IO members of scsi_cmnd, that will need to duplicate, into a substructure. - Group all IO members of scsi_cmnd into a scsi_data_buffer structure. - Adjust accessors to new members. - scsi_{alloc,free}_sgtable receive a scsi_data_buffer instead of scsi_cmnd. And work on it. - Adjust scsi_init_io() and scsi_release_buffers() for above change. - Fix other parts of scsi_lib/scsi.c to members migration. Use accessors where appropriate. - fix Documentation about scsi_cmnd in scsi_host.h - scsi_error.c * Changed needed members of struct scsi_eh_save. * Careful considerations in scsi_eh_prep/restore_cmnd. - sd.c and sr.c * sd and sr would adjust IO size to align on device's block size so code needs to change once we move to scsi_data_buff implementation. * Convert code to use scsi_for_each_sg * Use data accessors where appropriate. - tgt: convert libsrp to use scsi_data_buffer - isd200: This driver still bangs on scsi_cmnd IO members, so need changing [jejb: rebased on top of sg_table patches fixed up conflicts and used the synergy to eliminate use_sg and sg_count] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] tgt: use scsi_init_io instead of scsi_alloc_sgtableBoaz Harrosh2008-01-30
| | | | | | | | | | | | | | If we export scsi_init_io()/scsi_release_buffers() instead of scsi_{alloc,free}_sgtable() from scsi_lib than tgt code is much more insulated from scsi_lib changes. As a bonus it will also gain bidi capability when it comes. [jejb: rebase on to sg_table and fix up rejections] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* SG: Convert SCSI to use scatterlist helpers for sg chainingJens Axboe2008-01-28
| | | | | | | | Also change scsi_alloc_sgtable() to just return 0/failure, since it maps to the command passed in. ->request_buffer is now no longer needed, once drivers are adapted to use scsi_sglist() it can be killed. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [SCSI] use dynamically allocated sense bufferFUJITA Tomonori2008-01-23
| | | | | | | | | | | | | | | | | | | | | This removes static array sense_buffer in scsi_cmnd and uses dynamically allocated sense_buffer (with GFP_DMA). The reason for doing this is that some architectures need cacheline aligned buffer for DMA: http://lkml.org/lkml/2007/11/19/2 The problems are that scsi_eh_prep_cmnd puts scsi_cmnd::sense_buffer to sglist and some LLDs directly DMA to scsi_cmnd::sense_buffer. It's necessary to DMA to scsi_cmnd::sense_buffer safely. This patch solves these issues. __scsi_get_command allocates sense_buffer via kmem_cache_alloc and attaches it to a scsi_cmnd so everything just work as before. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""Linus Torvalds2008-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d. It turns out that the bug that was triggered by that commit was apparently not actually triggered by that commit at all, and just the testing conditions had changed enough to make it appear to be due to it. The real problem seems to have been found by Peter Osterlund: "pktcdvd sets it [block device size] when opening the /dev/pktcdvd device, but when the drive is later opened as /dev/scd0, there is nothing that sets it back. (Btw, 40944 is possible if the disk is a CDRW that was formatted with "cdrwtool -m 10236".) The problem is that pktcdvd opens the cd device in non-blocking mode when pktsetup is run, and doesn't close it again until pktsetup -d is run. The effect is that if you meanwhile open the cd device, blkdev.c:do_open() doesn't call bd_set_size() because bdev->bd_openers is non-zero." In particular, to repeat the bug (regardless of whether commit 6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not): " 1. Start with an empty drive. 2. pktsetup 0 /dev/scd0 3. Insert a CD containing an isofs filesystem. 4. mount /dev/pktcdvd/0 /mnt/tmp 5. umount /mnt/tmp 6. Press the eject button. 7. Insert a DVD containing a non-writable filesystem. 8. mount /dev/scd0 /mnt/tmp 9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null 10. If the DVD contains data beyond the physical size of a CD, you get I/O errors in the terminal, and dmesg reports lots of "attempt to access beyond end of device" errors." which in turn is because the nested open after the media change won't cause the size to be set properly (because the original open still holds the block device, and we only do the bd_set_size() when we don't have other people holding the device open). The proper fix for that is probably to just do something like bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9; in fs/block_dev.c:do_open() even for the cases where we're not the original opener (but *not* call bd_set_size(), since that will also change the block size of the device). Cc: Peter Osterlund <petero2@telia.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* scsi: revert "[SCSI] Get rid of scsi_cmnd->done"Ingo Molnar2008-01-02
| | | | | | | | | | | | | | | | | This reverts commit 6f5391c283d7fdcf24bf40786ea79061919d1e1d ("[SCSI] Get rid of scsi_cmnd->done") that was supposed to be a cleanup commit, but apparently it causes regressions: Bug 9370 - v2.6.24-rc2-409-g9418d5d: attempt to access beyond end of device http://bugzilla.kernel.org/show_bug.cgi?id=9370 this patch should be reintroduced in a more split-up form to make testing of it easier. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* remove sglist_lenFUJITA Tomonori2007-10-16
| | | | | Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* SCSI: support for allocating large scatterlistsJens Axboe2007-10-16
| | | | | | | | | | This is what enables large commands. If we need to allocate an sgtable that doesn't fit in a single page, allocate several SCSI_MAX_SG_SEGMENTS sized tables and chain them together. SCSI defaults to large chained sg tables, if the arch supports it. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* scsi: simplify scsi_free_sgtable()Jens Axboe2007-10-16
| | | | | | | Just pass in the command, no point in passing in the scatterlist and scatterlist pool index seperately. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* scsi: convert to using sg helpersJens Axboe2007-10-16
| | | | | | | This converts the SCSI mid layer to using the sg helpers for looking up sg elements, instead of doing it manually. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [SCSI] Get rid of scsi_cmnd->doneMatthew Wilcox2007-10-12
| | | | | | | | | | | | | | | The ULD ->done callback moves into the scsi_driver. By moving the call to scsi_io_completion() from scsi_blk_pc_done() to scsi_finish_command(), we can eliminate the latter entirely. By returning 'good_bytes' from the ->done callback (rather than invoking scsi_io_completion()), we can stop exporting scsi_io_completion(). Also move the prototypes from sd.h to sd.c as they're all internal anyway. Rename sd_rw_intr to sd_done and rw_intr to sr_done. Inspired-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] Remove ->pid field from scsi_cmndMatthew Wilcox2007-10-12
| | | | | | | | | The pid field is a duplicate of the serial_number field and has been scheduled for removal for a long time. A few drivers were still using it, so just change them to use serial_number instead. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] scsi_lib: add scatter/gather data buffer accessorsFUJITA Tomonori2007-05-26
| | | | | | | | | This adds a set of accessors for the scsi data buffer. This is in preparation for chaining sg lists and bidirectional requests (and possibly, the mid-layer dma mapping). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] tgt: rm bio hacks in scsi tgtMike Christie2007-03-11
| | | | | | | | | | | | | | | | | | | | | | | | scsi tgt breaks up a command into multple scatterlists if we cannot fit all the data in one. This was because the block rq helpers did not support large requests and because we can get a command of any old size so it is hard to preallocate pages for scatterlist large enough (we cannot really preallocate pages with the bio map user path). In 2.6.20, we added large request support to the block layer helper, blk_rq_map_user. And at LSF, we talked about increasing SCSI_MAX_PHYS_SEGMENTS for scsi tgt if we want to support really really :) large (greater than 256 * PAGE_SIZE in the worst mapping case) requests. The only target currently implemented does not even support the multiple scatterlists stuff and only supports smaller requests, so this patch just coverts scsi tgt to use blk_rq_map_user. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] export scsi-ml functions needed by tgt_scsi_lib and its LLDsFUJITA Tomonori2006-11-25
| | | | | | | | | | | | | | | | | | | | | | | This patch contains the needed changes to the scsi-ml for the target mode support. Note, per the last review we moved almost all the fields we added to the scsi_cmnd to our internal data structure which we are going to try and kill off when we can replace it with support from other parts of the kernel. The one field we left on was the offset variable. This is needed to handle the case where the target gets request that is so large that it cannot execute it in one dma operation. So max_secotors or a segment limit may limit the size of the transfer. In this case our tgt core code will break up the command into managable transfers and send them to the LLD one at a time. The offset is then used to tell the LLD where in the command we are at. Is there another field on the scsi_cmd for that? Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] remove SCSI_STATE_ #definesChristoph Hellwig2006-08-06
| | | | | | | | These aren't used anymore since the field in scsi_cmnd where it was stored has been removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] hide EH backup data outside the scsi_cmndChristoph Hellwig2006-07-09
| | | | | | | | | | | | | | | | | Currently struct scsi_cmnd has various fields that are used to backup original data after the corresponding fields have been overridden for EH commands. This means drivers can easily get at it and misuse it. Due to the old_ naming this doesn't happen for most of them, but two that have different names have been used wrong a lot (see previous patch). Another downside is that they unessecarily bloat the scsi_cmnd size. This patch moves them onstack in scsi_send_eh_cmnd to fix those two issues aswell as allowing future EH fixes like moving the EH command submissions to use SG lists like everything else. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] sd/scsi_lib simplify sd_rw_intr and scsi_io_completionLuben Tuikov2006-06-26
| | | | | | | | | | | | | | | | | | | This patch simplifies "good_bytes" computation in sd_rw_intr(). sd: "good_bytes" computation is always done in terms of the resolution of the device's medium, since after that it is the number of good bytes we pass around and other layers/contexts (as opposed ot sd) can translate that to their own resolution (block layer:512). It also makes scsi_io_completion() processing more straightforward, eliminating the 3rd argument to the function. It also fixes a couple of bugs like not checking return value, using "break" instead of "return;", etc. I've been running with this patch for some time now on a test (do-it-all) system. Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Merge branch 'master' into upstreamJeff Garzik2006-06-22
|\ | | | | | | | | | | | | | | Conflicts: drivers/scsi/libata-core.c drivers/scsi/libata-scsi.c include/linux/pci_ids.h
| * [SCSI] remove scsi_request infrastructureChristoph Hellwig2006-06-10
| | | | | | | | | | | | | | | | | | With Achim patch the last user (gdth) is switched away from scsi_request so we an kill it now. Also disables some code in i2o_scsi that was broken since the sg driver stopped using scsi_requests. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] dc395x: dynamically map scatter-gather for PIOGuennadi Liakhovetski2006-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current dc395x driver uses PIO to transfer up to 4 bytes which do not get transferred by DMA (under unclear circumstances). For this the driver uses page_address() which is broken on highmem. Apart from this the actual calculation of the virtual address is wrong (even without highmem). So, e.g., for reading it reads bytes from the driver to a wrong address and returns wrong data, I guess, for writing it would just output random data to the device. The proper fix, as suggested by many, is to dynamically map data using kmap_atomic(page, KM_BIO_SRC_IRQ) / kunmap_atomic(virt). The reason why it has not been done until now, although I've done some preliminary patches more than a year ago was that nobody interested in fixing this problem was able to reliably reproduce it. Now it changed - with the help from Sebastian Frei (CC'ed) I was able to trigger the PIO path. Thus, I was also able to test and debug it. There are 4 cases when PIO is used in dc395x - data-in / -out with and without scatter-gather. I was able to reproduce and test only data-in with and without SG. So, the data-out path is still untested, but it is also somewhat simpler than the data-in. Fredrik Roubert (also CC'ed) also had PIO triggering on his system, and in his case it was data-out without SG. It would be great if he could test the attached patch on his system, but even if he cannot, I would still request to apply the patch and just wait if anybody cries... Implementation: I put 2 new functions in scsi_lib.c and their declarations in scsi_cmnd.h. I exported them without _GPL, although, I don't feel strongly about that - not many drivers are likely to use them. But there is at least one more - I want to use them in tmscsim.c. Whether these are the right files for the functions and their declarations - not sure either. Actually, they are not scsi-specific, so, might go somewhere around other scattergather magic? They are not platform specific either, and most SG functions are defined under arch/*/... As these issues were discussed previously there were some more routines suggested to manipulate scattergather buffers, I think, some of them were needed around crypto code... So, might be a common place reasonable, like lib/scattergather.c? I am open here. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | [PATCH] SCSI: Introduce scsi_req_abort_cmd (REPOST)Luben Tuikov2006-05-15
|/ | | | | | | | | | | | | | | | Introduce scsi_req_abort_cmd(struct scsi_cmnd *). This function requests that SCSI Core start recovery for the command by deleting the timer and adding the command to the eh queue. It can be called by either LLDDs or SCSI Core. LLDDs who implement their own error recovery MAY ignore the timeout event if they generated scsi_req_abort_cmd. First post: http://marc.theaimsgroup.com/?l=linux-scsi&m=113833937421677&w=2 Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Tejun Heo <htejun@gmail.com>
* [SCSI] Neaten comments in scsi_cmnd.hMatthew Wilcox2006-02-27
| | | | | | | Wrap these two comments at 80 columns Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] always handle REQ_BLOCK_PC requests in common codeChristoph Hellwig2006-01-14
| | | | | | | | | | | | | | LLDDs should never see REQ_BLOCK_PC requests, we can handle them just fine in the core code. There is a small behaviour change in that some check in sr's rw_intr are bypassed, but I consider the old behaviour a bug. Mike found this cleanup opportunity and provdided early patches, so all the credit goes to him, even if I redid the patches from scratch beause that was easier than forward-porting the old patches. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Fix up SCSI mismergeJames Bottomley2005-12-15
| | | | I forgot to do a git-update-cache on the merged files ...
* [SCSI] Consolidate REQ_BLOCK_PC handling path (fix ipod panic)James Bottomley2005-12-14
| | | | | | | | This follows on from Jens' patch and consolidates all of the ULD separate handlers for REQ_BLOCK_PC into a single call which has his fix for our direction bug. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [PATCH] fix missing includesTim Schmielau2005-10-30
| | | | | | | | | | | | | | | | | | | | | I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] gfp_t: drivers/scsiAl Viro2005-10-28
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [SCSI] add global timeout to the scsi mid-layerJames Bottomley2005-08-08
| | | | | | | | | | | | | | | | | | There are certain rogue devices (and the aic7xxx driver) that return BUSY or QUEUE_FULL forever. This code will apply a global timeout (of the total number of retries times the per command timer) to a given command. If it is exceeded, the command is completed regardless of its state. The patch also removes the unused field in the command: timeout and timeout_total. This solves the problem of detecting an endless loop in the mid-layer because of BUSY/QUEUE_FULL bouncing, but will not recover the device. In the aic7xxx case, the driver can be recovered by sending a bus reset, so possibly this should be tied into the error handler? Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] remove scsi_cmnd->stateChristoph Hellwig2005-06-26
| | | | | | | | | We never look at it except for the old megaraid driver that abuses it for sending internal commands. That usage can be fixed easily because those internal commands are single-threaded by a mutex and we can easily use a completion there. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] remove scsi_cmnd->ownerChristoph Hellwig2005-06-26
| | | | | | never checked anywhere Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] remove scsi_cmnd->abort_reasonChristoph Hellwig2005-06-26
| | | | | | Never used for anything but printing it out in debug routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] remove scsi_cmnd.eh_stateChristoph Hellwig2005-06-26
| | | | | | | it's never set to anything, and just three broken drivers are looking at it and doing odd things. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [PATCH] scsi: remove meaningless scsi_cmnd->serial_number_at_timeout field2005-04-18
| | | | | | | | | | | | | scsi_cmnd->serial_number_at_timeout doesn't serve any purpose anymore. All serial_number == serial_number_at_timeout tests are always true in abort callbacks. Kill the field. Also, as ->pid always equals ->serial_number and ->serial_number doesn't have any special meaning anymore, update comments above ->serial_number accordingly. Once we remove all uses of this field from all lldd's, this field should go. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [PATCH] scsi: remove unused scsi_cmnd->internal_timeout field2005-04-18
| | | | | | | | scsi_cmnd->internal_timeout field doesn't have any meaning anymore. Kill the field. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-16
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!