aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux
Commit message (Collapse)AuthorAge
* libata/ahci: accommodate tag ordered controllersDan Williams2014-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AHCI spec allows implementations to issue commands in tag order rather than FIFO order: 5.3.2.12 P:SelectCmd HBA sets pSlotLoc = (pSlotLoc + 1) mod (CAP.NCS + 1) or HBA selects the command to issue that has had the PxCI bit set to '1' longer than any other command pending to be issued. The result is that commands posted sequentially (time-wise) may play out of sequence when issued by hardware. This behavior has likely been hidden by drives that arrange for commands to complete in issue order. However, it appears recent drives (two from different vendors that we have found so far) inflict out-of-order completions as a matter of course. So, we need to take care to maintain ordered submission, otherwise we risk triggering a drive to fall out of sequential-io automation and back to random-io processing, which incurs large latency and degrades throughput. This issue was found in simple benchmarks where QD=2 seq-write performance was 30-50% *greater* than QD=32 seq-write performance. Tagging for -stable and making the change globally since it has a low risk-to-reward ratio. Also, word is that recent versions of an unnamed OS also does it this way now. So, drives in the field are already experienced with this tag ordering scheme. Cc: <stable@vger.kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ed Ciechanowski <ed.ciechanowski@intel.com> Reviewed-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* Merge branch 'for-3.15/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds2014-04-01
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block driver update from Jens Axboe: "On top of the core pull request, here's the pull request for the driver related changes for 3.15. It contains: - Improvements for msi-x registration for block drivers (mtip32xx, skd, cciss, nvme) from Alexander Gordeev. - A round of cleanups and improvements for drbd from Andreas Gruenbacher and Rashika Kheria. - A round of clanups and improvements for bcache from Kent. - Removal of sleep_on() and friends in DAC960, ataflop, swim3 from Arnd Bergmann. - Bug fix for a bug in the mtip32xx async completion code from Sam Bradshaw. - Bug fix for accidentally bouncing IO on 32-bit platforms with mtip32xx from Felipe Franciosi" * 'for-3.15/drivers' of git://git.kernel.dk/linux-block: (103 commits) bcache: remove nested function usage bcache: Kill bucket->gc_gen bcache: Kill unused freelist bcache: Rework btree cache reserve handling bcache: Kill btree_io_wq bcache: btree locking rework bcache: Fix a race when freeing btree nodes bcache: Add a real GC_MARK_RECLAIMABLE bcache: Add bch_keylist_init_single() bcache: Improve priority_stats bcache: Better alloc tracepoints bcache: Kill dead cgroup code bcache: stop moving_gc marking buckets that can't be moved. bcache: Fix moving_pred() bcache: Fix moving_gc deadlocking with a foreground write bcache: Fix discard granularity bcache: Fix another bug recovering from unclean shutdown bcache: Fix a bug recovering from unclean shutdown bcache: Fix a journalling reclaim after recovery bug bcache: Fix a null ptr deref in journal replay ...
| * drbd: Move string function prototypes from linux/drbd.h to drbd_string.hAndreas Gruenbacher2014-02-17
| | | | | | | | | | Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
| * drbd: Define the size of res_opts->cpu_mask in a single placeAndreas Gruenbacher2014-02-17
| | | | | | | | | | Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
| * drbd: Improve some function and variable namingAndreas Gruenbacher2014-02-17
| | | | | | | | | | | | | | | | | | | | | | | | | | Rename functions conn_destroy() -> drbd_destroy_connection(), drbd_minor_destroy() -> drbd_destroy_device() drbd_adm_add_minor() -> drbd_adm_add_minor() drbd_adm_delete_minor() -> drbd_adm_del_minor() Rename global variable minors to drbd_devices Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
| * idr: Add new function idr_is_empty()Andreas Gruenbacher2014-02-17
| | | | | | | | | | Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
* | Merge branch 'for-3.15/core' of git://git.kernel.dk/linux-blockLinus Torvalds2014-04-01
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull core block layer updates from Jens Axboe: "This is the pull request for the core block IO bits for the 3.15 kernel. It's a smaller round this time, it contains: - Various little blk-mq fixes and additions from Christoph and myself. - Cleanup of the IPI usage from the block layer, and associated helper code. From Frederic Weisbecker and Jan Kara. - Duplicate code cleanup in bio-integrity from Gu Zheng. This will give you a merge conflict, but that should be easy to resolve. - blk-mq notify spinlock fix for RT from Mike Galbraith. - A blktrace partial accounting bug fix from Roman Pen. - Missing REQ_SYNC detection fix for blk-mq from Shaohua Li" * 'for-3.15/core' of git://git.kernel.dk/linux-block: (25 commits) blk-mq: add REQ_SYNC early rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock blk-mq: support partial I/O completions blk-mq: merge blk_mq_insert_request and blk_mq_run_request blk-mq: remove blk_mq_alloc_rq blk-mq: don't dump CPU -> hw queue map on driver load blk-mq: fix wrong usage of hctx->state vs hctx->flags blk-mq: allow blk_mq_init_commands() to return failure block: remove old blk_iopoll_enabled variable blktrace: fix accounting of partially completed requests smp: Rename __smp_call_function_single() to smp_call_function_single_async() smp: Remove wait argument from __smp_call_function_single() watchdog: Simplify a little the IPI call smp: Move __smp_call_function_single() below its safe version smp: Consolidate the various smp_call_function_single() declensions smp: Teach __smp_call_function_single() to check for offline cpus smp: Remove unused list_head from csd smp: Iterate functions through llist_for_each_entry_safe() block: Stop abusing rq->csd.list in blk-softirq block: Remove useless IPI struct initialization ...
| * | blk-mq: merge blk_mq_insert_request and blk_mq_run_requestChristoph Hellwig2014-03-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | It's almost identical to blk_mq_insert_request, so fold the two into one slightly more generic function by making the flush special case a bit smarted. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | blk-mq: fix wrong usage of hctx->state vs hctx->flagsJens Axboe2014-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BLK_MQ_F_* flags are for hctx->flags, and are non-atomic and set at registration time. BLK_MQ_S_* flags are dynamic and atomic, and are accessed through hctx->state. Some of the BLK_MQ_S_STOPPED uses were wrong. Additionally, the header file should not use a bit shift for the _S_ flags, as they are done through the set/test_bit functions. Signed-off-by: Jens Axboe <axboe@fb.com>
| * | blk-mq: allow blk_mq_init_commands() to return failureJens Axboe2014-03-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If drivers do dynamic allocation in the hardware command init path, then we need to be able to handle and return failures. And if they do allocations or mappings in the init command path, then we need a cleanup function to free up that space at exit time. So add blk_mq_free_commands() as the cleanup function. This is required for the mtip32xx driver conversion to blk-mq. Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: remove old blk_iopoll_enabled variableJens Axboe2014-03-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was a debugging measure to toggle enabled/disabled when testing. But for real production setups, it's not safe to toggle this setting without either reloading drivers of quiescing IO first. Neither of which the toggle enforces. Additionally, it makes drivers deal with the conditional state. Remove it completely. It's up to the driver whether iopoll is enabled or not. Signed-off-by: Jens Axboe <axboe@fb.com>
| * | smp: Rename __smp_call_function_single() to smp_call_function_single_async()Frederic Weisbecker2014-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The name __smp_call_function_single() doesn't tell much about the properties of this function, especially when compared to smp_call_function_single(). The comments above the implementation are also misleading. The main point of this function is actually not to be able to embed the csd in an object. This is actually a requirement that result from the purpose of this function which is to raise an IPI asynchronously. As such it can be called with interrupts disabled. And this feature comes at the cost of the caller who then needs to serialize the IPIs on this csd. Lets rename the function and enhance the comments so that they reflect these properties. Suggested-by: Christoph Hellwig <hch@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | smp: Remove wait argument from __smp_call_function_single()Frederic Weisbecker2014-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The main point of calling __smp_call_function_single() is to send an IPI in a pure asynchronous way. By embedding a csd in an object, a caller can send the IPI without waiting for a previous one to complete as is required by smp_call_function_single() for example. As such, sending this kind of IPI can be safe even when irqs are disabled. This flexibility comes at the expense of the caller who then needs to synchronize the csd lifecycle by himself and make sure that IPIs on a single csd are serialized. This is how __smp_call_function_single() works when wait = 0 and this usecase is relevant. Now there don't seem to be any usecase with wait = 1 that can't be covered by smp_call_function_single() instead, which is safer. Lets look at the two possible scenario: 1) The user calls __smp_call_function_single(wait = 1) on a csd embedded in an object. It looks like a nice and convenient pattern at the first sight because we can then retrieve the object from the IPI handler easily. But actually it is a waste of memory space in the object since the csd can be allocated from the stack by smp_call_function_single(wait = 1) and the object can be passed an the IPI argument. Besides that, embedding the csd in an object is more error prone because the caller must take care of the serialization of the IPIs for this csd. 2) The user calls __smp_call_function_single(wait = 1) on a csd that is allocated on the stack. It's ok but smp_call_function_single() can do it as well and it already takes care of the allocation on the stack. Again it's more simple and less error prone. Therefore, using the underscore prepend API version with wait = 1 is a bad pattern and a sign that the caller can do safer and more simple. There was a single user of that which has just been converted. So lets remove this option to discourage further users. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | smp: Teach __smp_call_function_single() to check for offline cpusJan Kara2014-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Align __smp_call_function_single() with smp_call_function_single() so that it also checks whether requested cpu is still online. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | smp: Remove unused list_head from csdJan Kara2014-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we got rid of all the remaining code which fiddled with csd.list, lets remove it. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: Remove useless IPI struct initializationFrederic Weisbecker2014-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rq_fifo_clear() reset the csd.list through INIT_LIST_HEAD for no clear purpose. The csd.list doesn't need to be initialized as a list head because it's only ever used as a list node. Lets remove this useless initialization. Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: Stop abusing csd.list for fifo_timeJan Kara2014-02-24
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Block layer currently abuses rq->csd.list.next for storing fifo_time. That is a terrible hack and completely unnecessary as well. Union achieves the same space saving in a cleaner way. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2014-04-01
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull first round of SCSI updates from James Bottomley: "This patch consists of the usual driver updates (megaraid_sas, scsi_debug, qla2xxx, qla4xxx, lpfc, bnx2fc, be2iscsi, hpsa, ipr) plus an assortment of minor fixes and the first precursors of SCSI-MQ (the code path simplifications) and the bug fix for the USB oops on remove (which involves an infrastructure change, so is sent via the main tree with a delayed backport after a cycle in which it is shown to introduce no new bugs)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (196 commits) [SCSI] sd: Quiesce mode sense error messages [SCSI] add support for per-host cmd pools [SCSI] simplify command allocation and freeing a bit [SCSI] megaraid: simplify internal command handling [SCSI] ses: Use vpd information from scsi_device [SCSI] Add EVPD page 0x83 and 0x80 to sysfs [SCSI] Return VPD page length in scsi_vpd_inquiry() [SCSI] scsi_sysfs: Implement 'is_visible' callback [SCSI] hpsa: update driver version to 3.4.4-1 [SCSI] hpsa: fix bad endif placement in RAID 5 mapper code [SCSI] qla2xxx: Fix build errors related to invalid print fields on some architectures. [SCSI] bfa: Replace large udelay() with mdelay() [SCSI] vmw_pvscsi: Some improvements in pvscsi driver. [SCSI] vmw_pvscsi: Add support for I/O requests coalescing. [SCSI] vmw_pvscsi: Fix pvscsi_abort() function. [SCSI] remove deprecated IRQF_DISABLED from SCSI [SCSI] bfa: Updating Maintainers email ids [SCSI] ipr: Add new CCIN definition for Grand Canyon support [SCSI] ipr: Format HCAM overlay ID 0x21 [SCSI] ipr: Use pci_enable_msi_range() and pci_enable_msix_range() ...
| * | [SCSI] hpsa: add HP/3PAR vendor id to pci_ids.hStephen M. Cameron2014-03-15
| | | | | | | | | | | | | | | Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | | Merge tag 'usb-3.15-rc1' of ↵Linus Torvalds2014-04-01
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big USB pull request for 3.15-rc1. The normal set of patches, lots of controller driver updates, and a smattering of individual USB driver updates as well. All have been in linux-next for a while" * tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits) xhci: Transition maintainership to Mathias Nyman. USB: disable reset-resume when USB_QUIRK_RESET is set USB: unbind all interfaces before rebinding any usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210 usb: gadget: tcm_usb_gadget: stop format strings usb: gadget: f_fs: add missing spinlock and mutex unlock usb: gadget: composite: switch over to ERR_CAST() usb: gadget: inode: switch over to memdup_user() usb: gadget: f_subset: switch over to PTR_RET usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence USB: keyspan: remove dead debugging code USB: serial: add missing newlines to dev_<level> messages. USB: serial: add missing braces USB: serial: continue to write on errors USB: serial: continue to read on errors USB: serial: make bulk_out_size a lower limit USB: cypress_m8: fix potential scheduling while atomic devicetree: bindings: document lsi,zevio-usb usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs ...
| * | | USB: serial: make bulk_out_size a lower limitJohan Hovold2014-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drivers are allowed to override the default bulk-out buffer size (endpoint maximum packet size) in order to increase throughput, but it does not make much sense to allow buffers smaller than the default. Note that this is already how bulk_in_size is defined. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
| * | | Merge 3.14-rc6 into usb-nextGreg Kroah-Hartman2014-03-12
| |\ \ \ | | | | | | | | | | | | | | | We want the USB fixes in here as well.
| * \ \ \ Merge tag 'for_3.15' of ↵Greg Kroah-Hartman2014-03-09
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: Add new PHY drivers for SATA and USB in exynos, for USB in sunxi, and a multi-purpose PHY in APM, all adapted to generic PHY framework. Adapted USB3 PHY driver in OMAP to generic PHY driver and also used the same driver for SATA in OMAP. It also includes miscellaneous cleanups and fixes.
| | * | | | phy: rename struct omap_control_usb to struct omap_control_phyKishon Vijay Abraham I2014-03-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename struct omap_control_usb to struct omap_control_phy since it can be used to control PHY of USB, SATA and PCIE. Also move the driver and include files under *phy* and made the corresponding changes in the users of phy-omap-control. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com>
| | * | | | phy: omap-usb2: Provide workaround for USB2PHY false disconnectAustin Beam2014-03-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the dra7x errata workaround for false disconnect problem with USB2PHY. False disconnects were detected with some of the devices. Reduce the sensitivity of the disconnect logic within the USB2PHY subsystem to enusre these false disconnects are not registered. [george.cherian@ti.com] While at that, pass proper flags for each SoC's. This is a common driver used across OMAP4,OMAP5,DRA7xx and AM437x USB2PHY. False disconnect workaround is currently applicable for only DRA7x. Signed-off-by: Austin Beam <austinbeam@ti.com> Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| | * | | | phy: omap-usb2: Adapt phy-omap-usb2 for AM437xGeorge Cherian2014-03-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adapt phy-omap-usb2 driver for AM437x. - Add new comaptible "ti,am437x-usb2" for AM437x - Pass proper data to differentiate AM437x and others. - AM437x doesnot support set_vbus and start_srp. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| | * | | | phy: core: Add devm_of_phy_get to phy-coreKamil Debski2014-03-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding devm_of_phy_get will allow to get phys by supplying a pointer to the struct device_node instead of struct device. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| | * | | | phy: core: Add an exported of_phy_get functionKamil Debski2014-03-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously the of_phy_get function took a struct device * and was declared static. It was impossible to call it from another driver and thus it was impossible to get phy defined for a given node. The old function was renamed to _of_phy_get and was left for internal use. of_phy_get function was added and it was exported. The function enables to get a phy for a given device tree node. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| | * | | | phy: omap-usb2: move omap_usb.h from linux/usb/ to linux/phy/Kishon Vijay Abraham I2014-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No functional change. Moved omap_usb.h from linux/usb/ to linux/phy/. Also removed the unused members of struct omap_usb (after phy-omap-pipe3 started using it's own header file) Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | | | | Merge tag 'usb-for-v3.15' of ↵Greg Kroah-Hartman2014-03-07
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.15 another substantial pull request with new features all over the place. dwc3 got a bit closer towards hibernation support with after a few patches re-factoring code to be reused for hibernation. Also in dwc3 two new workarounds for known silicon bugs have been implemented, some randconfig build errors have been fixed, and it was taught about the new generic phy layer. MUSB on AM335x now supports isochronous transfers thanks to George Cherian's work. The atmel_usba driver got two crash fixes: one when no endpoint was specified in DeviceTree data and another when stopping the UDC in DEBUG builds. Function FS got a much needed fix to ffs_epfile_io() which was copying too much data to userspace in some cases. The printer gadget got a fix for a possible deadlock and plugged a memory leak. Ethernet drivers now use NAPI for RX which gives improved throughput. Other than that, the usual miscelaneous fixes, cleanups, and the like. Signed-of-by: Felipe Balbi <balbi@ti.com>
| | * | | | | usb: phy: Add set_wakeup APIPeter Chen2014-03-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This API is used to set wakeup enable at PHY registers, in that case, the PHY can be waken up from suspend due to external events, like vbus change, dp/dm change and id change. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * | | | | | storage: accept some UAS devices if streams are unavailableOliver Neukum2014-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some older XHCIs streams are not supported and the UAS driver will fail at probe time. For those devices storage should try to bind to UAS devices. This patch adds a flag for stream support to HCDs and evaluates it. [Note: Sarah fixed a bug where the USB 2.0 root hub, not USB 3.0 root hub would get marked as being able to support streams.] Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
| * | | | | | uas: Add the posibilty to blacklist uas devices from using the uas driverHans de Goede2014-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once we start supporting uas hardware, and as more and more uas devices become available, we will likely start seeing broken devices. This patch prepares for the inevitable need for blacklisting those devices from using the uas driver (they will use usb-storage instead). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * | | | | | uas: Pack iu struct definitionsHans de Goede2014-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The iu struct definitions are usb packet definitions, so no alignment should happen. Notice that assuming 32 bit alignment this does not make any difference at all. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * | | | | | uas: Fix response iu struct definitionHans de Goede2014-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The response iu struct before this patch has a size of 7 bytes (discounting padding), which is weird since all other iu-s are explictly padded to a multiple of 4 bytes. More over submitting a 7 byte bulk transfer to the status endpoint when expecting a response iu results in an USB babble error, as the device actually sends 8 bytes. Up on closer reading of the UAS spec: http://www.t10.org/cgi-bin/ac.pl?t=f&f=uas2r00.pdf The reason for this becomes clear, the 2 entries in "Table 17 — RESPONSE IU" are numbered 4 and 6, looking at other iu definitions in the spec, esp. multi-byte fields, this indicates that the ADDITIONAL RESPONSE INFORMATION field is not a 2 byte field as one might assume at a first look, but is a multi-byte field containing 3 bytes. This also aligns with the SCSI Architecture Model 4 spec, which UAS is based on which states in paragraph "7.1 Task management function procedure calls" that the "Additional Response Information" output argument for a Task management function procedure call is 3 bytes. Last but not least I've verified this by sending a logical unit reset task management call with an invalid lun to an actual uasp device, and received back a response-iu with byte 6 being 0, and byte 7 being 9, which is the responce code for an invalid iu, which confirms that the response code is being reported in byte 7 of the response iu rather then in byte 6. Things were working before despite this error in the response iu struct definition because the additional response info field is normally filled with zeros, and 0 is the response code value for success. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * | | | | | uas: s/response_ui/response_iu/Hans de Goede2014-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * | | | | | usb-core: Track if an endpoint has streamsHans de Goede2014-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a preparation patch for adding support for bulk streams to usbfs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * | | | | | usb-core: Move USB_MAXENDPOINTS definitions to usb.hHans de Goede2014-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So that it can be used in other places too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * | | | | | Merge 3.14-rc5 into usb-nextGreg Kroah-Hartman2014-03-03
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | We want the fixes here too.
| * | | | | | | usb: chipidea: udc: add maximum-speed = full-speed optionMichael Grzeschik2014-02-24
| | |_|/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes it possible to set the chipidea udc into full-speed only mode. It is set by the oftree property "maximum-speed = full-speed". Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | | | Merge tag 'tty-3.15-rc1' of ↵Linus Torvalds2014-04-01
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg KH: "Here's the big tty/serial driver update for 3.15-rc1. Nothing major, a number of serial driver updates and a few tty core fixes as well. All have been in linux-next for a while" * tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty/serial: omap: empty the RX FIFO at the end of half-duplex TX tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX serial: sh-sci: Neaten dev_<level> uses serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF serial: sh-sci: Add more register documentation serial: sh-sci: Remove useless casts serial: sh-sci: Replace printk() by pr_*() serial_core: Avoid NULL pointer dereference in uart_close() serial_core: Get a reference for port->tty in uart_remove_one_port() serial: clps711x: Give a chance to perform useful tasks during wait loop serial_core: Grammar s/ports/port's/ serial_core: Spelling s/contro/control/ serial: efm32: properly namespace location property serial: max310x: Add missing #include <linux/uaccess.h> synclink: fix info leak in ioctl serial: 8250: Clean up the locking for -rt serial: 8250_pci: change BayTrail default uartclk serial: 8250_pci: more BayTrail error-free bauds serial: sh-sci: Add missing call to uart_remove_one_port() in failure path serial_core: Unregister console in uart_remove_one_port() ...
| * | | | | | | serial: sh-sci: Add more register documentationGeert Uytterhoeven2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | | Merge 3.14-rc5 into tty-nextGreg Kroah-Hartman2014-03-02
| |\ \ \ \ \ \ \ | | | |/ / / / / | | |/| | | | | | | | | | | | | We want these fixes in here
| * | | | | | | serial: imx: Remove init() and exit() platform callbacksAlexander Shiyan2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | | tty: Fix low_latency BUGPeter Hurley2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The user-settable knob, low_latency, has been the source of several BUG reports which stem from flush_to_ldisc() running in interrupt context. Since 3.12, which added several sleeping locks (termios_rwsem and buf->lock) to the input processing path, the frequency of these BUG reports has increased. Note that changes in 3.12 did not introduce this regression; sleeping locks were first added to the input processing path with the removal of the BKL from N_TTY in commit a88a69c91256418c5907c2f1f8a0ec0a36f9e6cc, 'n_tty: Fix loss of echoed characters and remove bkl from n_tty' and later in commit 38db89799bdf11625a831c5af33938dcb11908b6, 'tty: throttling race fix'. Since those changes, executing flush_to_ldisc() in interrupt_context (ie, low_latency set), is unsafe. However, since most devices do not validate if the low_latency setting is appropriate for the context (process or interrupt) in which they receive data, some reports are due to misconfiguration. Further, serial dma devices for which dma fails, resort to interrupt receiving as a backup without resetting low_latency. Historically, low_latency was used to force wake-up the reading process rather than wait for the next scheduler tick. The effect was to trim multiple milliseconds of latency from when the process would receive new data. Recent tests [1] have shown that the reading process now receives data with only 10's of microseconds latency without low_latency set. Remove the low_latency rx steering from tty_flip_buffer_push(); however, leave the knob as an optional hint to drivers that can tune their rx fifos and such like. Cleanup stale code comments regarding low_latency. [1] https://lkml.org/lkml/2014/2/20/434 "Yay.. thats an annoying historical pain in the butt gone." -- Alan Cox Reported-by: Beat Bolli <bbolli@ewanet.ch> Reported-by: Pavel Roskin <proski@gnu.org> Acked-by: David Sterba <dsterba@suse.cz> Cc: Grant Edwards <grant.b.edwards@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Hal Murray <murray+fedora@ip-64-139-1-69.sjc.megapath.net> Cc: <stable@vger.kernel.org> # 3.12.x+ Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | | tty: serial: bcm63xx_uart: define UART_REG_SIZE constantFlorian Fainelli2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bcm63xx_uart driver uses RSET_UART_SIZE which is a constant defined for MIPS-based BCM63xx platforms, pull this constant value from the MIPS-specific header and put it in include/linux/serial_bcm63xx.h to make the driver platform agnostic. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | | Merge 3.14-rc4 into tty-nextGreg Kroah-Hartman2014-02-24
| |\ \ \ \ \ \ \ | | | |/ / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want the tty revert here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | | tty: tty_ldisc.h: Remove duplicate includeSachin Kamat2014-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | linux/wait.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | | Merge 3.14-rc3 into tty-nextGreg Kroah-Hartman2014-02-18
| |\ \ \ \ \ \ \ | | | |_|_|_|_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is for the fixes in that release, we want them here too. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | | serial: max310x: Add support for RS-485 modeAlexander Shiyan2014-02-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for RS-485 (TIOCSRS485/TIOCGRS485) IOCTLs. As a result this patch eliminate private driver header. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2026-04-09 23:32:07 -0400